summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap2/pm34xx.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-omap2/pm34xx.c')
-rw-r--r--arch/arm/mach-omap2/pm34xx.c158
1 files changed, 44 insertions, 114 deletions
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index fa637dfdda53..fc6987578920 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -28,7 +28,6 @@
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/slab.h>
-#include <linux/console.h>
#include <trace/events/power.h>
#include <asm/suspend.h>
@@ -36,7 +35,6 @@
#include <plat/sram.h>
#include "clockdomain.h"
#include "powerdomain.h"
-#include <plat/serial.h>
#include <plat/sdrc.h>
#include <plat/prcm.h>
#include <plat/gpmc.h>
@@ -54,15 +52,6 @@
#ifdef CONFIG_SUSPEND
static suspend_state_t suspend_state = PM_SUSPEND_ON;
-static inline bool is_suspending(void)
-{
- return (suspend_state != PM_SUSPEND_ON) && console_suspend_enabled;
-}
-#else
-static inline bool is_suspending(void)
-{
- return false;
-}
#endif
/* pm34xx errata defined in pm.h */
@@ -195,7 +184,7 @@ static void omap3_save_secure_ram_context(void)
* that any peripheral wake-up events occurring while attempting to
* clear the PM_WKST_x are detected and cleared.
*/
-static int prcm_clear_mod_irqs(s16 module, u8 regs)
+static int prcm_clear_mod_irqs(s16 module, u8 regs, u32 ignore_bits)
{
u32 wkst, fclk, iclk, clken;
u16 wkst_off = (regs == 3) ? OMAP3430ES2_PM_WKST3 : PM_WKST1;
@@ -207,6 +196,7 @@ static int prcm_clear_mod_irqs(s16 module, u8 regs)
wkst = omap2_prm_read_mod_reg(module, wkst_off);
wkst &= omap2_prm_read_mod_reg(module, grpsel_off);
+ wkst &= ~ignore_bits;
if (wkst) {
iclk = omap2_cm_read_mod_reg(module, iclk_off);
fclk = omap2_cm_read_mod_reg(module, fclk_off);
@@ -222,6 +212,7 @@ static int prcm_clear_mod_irqs(s16 module, u8 regs)
omap2_cm_set_mod_reg_bits(clken, module, fclk_off);
omap2_prm_write_mod_reg(wkst, module, wkst_off);
wkst = omap2_prm_read_mod_reg(module, wkst_off);
+ wkst &= ~ignore_bits;
c++;
}
omap2_cm_write_mod_reg(iclk, module, iclk_off);
@@ -231,76 +222,35 @@ static int prcm_clear_mod_irqs(s16 module, u8 regs)
return c;
}
-static int _prcm_int_handle_wakeup(void)
+static irqreturn_t _prcm_int_handle_io(int irq, void *unused)
{
int c;
- c = prcm_clear_mod_irqs(WKUP_MOD, 1);
- c += prcm_clear_mod_irqs(CORE_MOD, 1);
- c += prcm_clear_mod_irqs(OMAP3430_PER_MOD, 1);
- if (omap_rev() > OMAP3430_REV_ES1_0) {
- c += prcm_clear_mod_irqs(CORE_MOD, 3);
- c += prcm_clear_mod_irqs(OMAP3430ES2_USBHOST_MOD, 1);
- }
+ c = prcm_clear_mod_irqs(WKUP_MOD, 1,
+ ~(OMAP3430_ST_IO_MASK | OMAP3430_ST_IO_CHAIN_MASK));
- return c;
+ return c ? IRQ_HANDLED : IRQ_NONE;
}
-/*
- * PRCM Interrupt Handler
- *
- * The PRM_IRQSTATUS_MPU register indicates if there are any pending
- * interrupts from the PRCM for the MPU. These bits must be cleared in
- * order to clear the PRCM interrupt. The PRCM interrupt handler is
- * implemented to simply clear the PRM_IRQSTATUS_MPU in order to clear
- * the PRCM interrupt. Please note that bit 0 of the PRM_IRQSTATUS_MPU
- * register indicates that a wake-up event is pending for the MPU and
- * this bit can only be cleared if the all the wake-up events latched
- * in the various PM_WKST_x registers have been cleared. The interrupt
- * handler is implemented using a do-while loop so that if a wake-up
- * event occurred during the processing of the prcm interrupt handler
- * (setting a bit in the corresponding PM_WKST_x register and thus
- * preventing us from clearing bit 0 of the PRM_IRQSTATUS_MPU register)
- * this would be handled.
- */
-static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id)
+static irqreturn_t _prcm_int_handle_wakeup(int irq, void *unused)
{
- u32 irqenable_mpu, irqstatus_mpu;
- int c = 0;
-
- irqenable_mpu = omap2_prm_read_mod_reg(OCP_MOD,
- OMAP3_PRM_IRQENABLE_MPU_OFFSET);
- irqstatus_mpu = omap2_prm_read_mod_reg(OCP_MOD,
- OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
- irqstatus_mpu &= irqenable_mpu;
-
- do {
- if (irqstatus_mpu & (OMAP3430_WKUP_ST_MASK |
- OMAP3430_IO_ST_MASK)) {
- c = _prcm_int_handle_wakeup();
-
- /*
- * Is the MPU PRCM interrupt handler racing with the
- * IVA2 PRCM interrupt handler ?
- */
- WARN(c == 0, "prcm: WARNING: PRCM indicated MPU wakeup "
- "but no wakeup sources are marked\n");
- } else {
- /* XXX we need to expand our PRCM interrupt handler */
- WARN(1, "prcm: WARNING: PRCM interrupt received, but "
- "no code to handle it (%08x)\n", irqstatus_mpu);
- }
-
- omap2_prm_write_mod_reg(irqstatus_mpu, OCP_MOD,
- OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
-
- irqstatus_mpu = omap2_prm_read_mod_reg(OCP_MOD,
- OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
- irqstatus_mpu &= irqenable_mpu;
+ int c;
- } while (irqstatus_mpu);
+ /*
+ * Clear all except ST_IO and ST_IO_CHAIN for wkup module,
+ * these are handled in a separate handler to avoid acking
+ * IO events before parsing in mux code
+ */
+ c = prcm_clear_mod_irqs(WKUP_MOD, 1,
+ OMAP3430_ST_IO_MASK | OMAP3430_ST_IO_CHAIN_MASK);
+ c += prcm_clear_mod_irqs(CORE_MOD, 1, 0);
+ c += prcm_clear_mod_irqs(OMAP3430_PER_MOD, 1, 0);
+ if (omap_rev() > OMAP3430_REV_ES1_0) {
+ c += prcm_clear_mod_irqs(CORE_MOD, 3, 0);
+ c += prcm_clear_mod_irqs(OMAP3430ES2_USBHOST_MOD, 1, 0);
+ }
- return IRQ_HANDLED;
+ return c ? IRQ_HANDLED : IRQ_NONE;
}
static void omap34xx_save_context(u32 *save)
@@ -376,20 +326,11 @@ void omap_sram_idle(void)
omap3_enable_io_chain();
}
- /* Block console output in case it is on one of the OMAP UARTs */
- if (!is_suspending())
- if (per_next_state < PWRDM_POWER_ON ||
- core_next_state < PWRDM_POWER_ON)
- if (!console_trylock())
- goto console_still_active;
-
pwrdm_pre_transition();
/* PER */
if (per_next_state < PWRDM_POWER_ON) {
per_going_off = (per_next_state == PWRDM_POWER_OFF) ? 1 : 0;
- omap_uart_prepare_idle(2);
- omap_uart_prepare_idle(3);
omap2_gpio_prepare_for_idle(per_going_off);
if (per_next_state == PWRDM_POWER_OFF)
omap3_per_save_context();
@@ -397,8 +338,6 @@ void omap_sram_idle(void)
/* CORE */
if (core_next_state < PWRDM_POWER_ON) {
- omap_uart_prepare_idle(0);
- omap_uart_prepare_idle(1);
if (core_next_state == PWRDM_POWER_OFF) {
omap3_core_save_context();
omap3_cm_save_context();
@@ -447,8 +386,6 @@ void omap_sram_idle(void)
omap3_sram_restore_context();
omap2_sms_restore_context();
}
- omap_uart_resume_idle(0);
- omap_uart_resume_idle(1);
if (core_next_state == PWRDM_POWER_OFF)
omap2_prm_clear_mod_reg_bits(OMAP3430_AUTO_OFF_MASK,
OMAP3430_GR_MOD,
@@ -464,14 +401,8 @@ void omap_sram_idle(void)
omap2_gpio_resume_after_idle();
if (per_prev_state == PWRDM_POWER_OFF)
omap3_per_restore_context();
- omap_uart_resume_idle(2);
- omap_uart_resume_idle(3);
}
- if (!is_suspending())
- console_unlock();
-
-console_still_active:
/* Disable IO-PAD and IO-CHAIN wakeup */
if (omap3_has_io_wakeup() &&
(per_next_state < PWRDM_POWER_ON ||
@@ -485,21 +416,11 @@ console_still_active:
clkdm_allow_idle(mpu_pwrdm->pwrdm_clkdms[0]);
}
-int omap3_can_sleep(void)
-{
- if (!omap_uart_can_sleep())
- return 0;
- return 1;
-}
-
static void omap3_pm_idle(void)
{
local_irq_disable();
local_fiq_disable();
- if (!omap3_can_sleep())
- goto out;
-
if (omap_irq_pending() || need_resched())
goto out;
@@ -533,7 +454,6 @@ static int omap3_pm_suspend(void)
goto restore;
}
- omap_uart_prepare_suspend();
omap3_intc_suspend();
omap_sram_idle();
@@ -580,22 +500,27 @@ static int omap3_pm_begin(suspend_state_t state)
{
disable_hlt();
suspend_state = state;
- omap_uart_enable_irqs(0);
+ omap_prcm_irq_prepare();
return 0;
}
static void omap3_pm_end(void)
{
suspend_state = PM_SUSPEND_ON;
- omap_uart_enable_irqs(1);
enable_hlt();
return;
}
+static void omap3_pm_finish(void)
+{
+ omap_prcm_irq_complete();
+}
+
static const struct platform_suspend_ops omap_pm_ops = {
.begin = omap3_pm_begin,
.end = omap3_pm_end,
.enter = omap3_pm_enter,
+ .finish = omap3_pm_finish,
.valid = suspend_valid_only_mem,
};
#endif /* CONFIG_SUSPEND */
@@ -701,10 +626,6 @@ static void __init prcm_setup_regs(void)
OMAP3430_GRPSEL_GPT1_MASK |
OMAP3430_GRPSEL_GPT12_MASK,
WKUP_MOD, OMAP3430_PM_MPUGRPSEL);
- /* For some reason IO doesn't generate wakeup event even if
- * it is selected to mpu wakeup goup */
- omap2_prm_write_mod_reg(OMAP3430_IO_EN_MASK | OMAP3430_WKUP_EN_MASK,
- OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
/* Enable PM_WKEN to support DSS LPR */
omap2_prm_write_mod_reg(OMAP3430_PM_WKEN_DSS_EN_DSS_MASK,
@@ -881,12 +802,21 @@ static int __init omap3_pm_init(void)
* supervised mode for powerdomains */
prcm_setup_regs();
- ret = request_irq(INT_34XX_PRCM_MPU_IRQ,
- (irq_handler_t)prcm_interrupt_handler,
- IRQF_DISABLED, "prcm", NULL);
+ ret = request_irq(omap_prcm_event_to_irq("wkup"),
+ _prcm_int_handle_wakeup, IRQF_NO_SUSPEND, "pm_wkup", NULL);
+
+ if (ret) {
+ pr_err("pm: Failed to request pm_wkup irq\n");
+ goto err1;
+ }
+
+ /* IO interrupt is shared with mux code */
+ ret = request_irq(omap_prcm_event_to_irq("io"),
+ _prcm_int_handle_io, IRQF_SHARED | IRQF_NO_SUSPEND, "pm_io",
+ omap3_pm_init);
+
if (ret) {
- printk(KERN_ERR "request_irq failed to register for 0x%x\n",
- INT_34XX_PRCM_MPU_IRQ);
+ pr_err("pm: Failed to request pm_io irq\n");
goto err1;
}
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-12 04:35:12 +0000