diff options
Diffstat (limited to 'arch/arm/mach-omap2/serial.c')
| -rw-r--r-- | arch/arm/mach-omap2/serial.c | 555 |
1 files changed, 284 insertions, 271 deletions
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 566e991ede81..0bcc9df0c034 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -19,19 +19,30 @@ */ #include <linux/kernel.h> #include <linux/init.h> -#include <linux/serial_8250.h> #include <linux/serial_reg.h> #include <linux/clk.h> #include <linux/io.h> #include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/serial_8250.h> +#include <linux/pm_runtime.h> + +#ifdef CONFIG_SERIAL_OMAP +#include <plat/omap-serial.h> +#endif #include <plat/common.h> #include <plat/board.h> #include <plat/clock.h> #include <plat/control.h> +#include <plat/dma.h> +#include <plat/omap_hwmod.h> +#include <plat/omap_device.h> #include "prm.h" #include "pm.h" +#include "cm.h" #include "prm-regbits-34xx.h" #define UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV 0x52 @@ -48,6 +59,8 @@ */ #define DEFAULT_TIMEOUT 0 +#define MAX_UART_HWMOD_NAME_LEN 16 + struct omap_uart_state { int num; int can_sleep; @@ -58,14 +71,21 @@ struct omap_uart_state { void __iomem *wk_en; u32 wk_mask; u32 padconf; + u32 dma_enabled; struct clk *ick; struct clk *fck; int clocked; - struct plat_serial8250_port *p; + int irq; + int regshift; + int irqflags; + void __iomem *membase; + resource_size_t mapbase; + struct list_head node; - struct platform_device pdev; + struct omap_hwmod *oh; + struct platform_device *pdev; u32 errata; #if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM) @@ -83,75 +103,47 @@ struct omap_uart_state { }; static LIST_HEAD(uart_list); +static u8 num_uarts; -static struct plat_serial8250_port serial_platform_data0[] = { - { - .irq = 72, - .flags = UPF_BOOT_AUTOCONF, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = OMAP24XX_BASE_BAUD * 16, - }, { - .flags = 0 - } -}; +/* + * Since these idle/enable hooks are used in the idle path itself + * which has interrupts disabled, use the non-locking versions of + * the hwmod enable/disable functions. + */ +static int uart_idle_hwmod(struct omap_device *od) +{ + _omap_hwmod_idle(od->hwmods[0]); -static struct plat_serial8250_port serial_platform_data1[] = { - { - .irq = 73, - .flags = UPF_BOOT_AUTOCONF, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = OMAP24XX_BASE_BAUD * 16, - }, { - .flags = 0 - } -}; + return 0; +} -static struct plat_serial8250_port serial_platform_data2[] = { - { - .irq = 74, - .flags = UPF_BOOT_AUTOCONF, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = OMAP24XX_BASE_BAUD * 16, - }, { - .flags = 0 - } -}; +static int uart_enable_hwmod(struct omap_device *od) +{ + _omap_hwmod_enable(od->hwmods[0]); + + return 0; +} -static struct plat_serial8250_port serial_platform_data3[] = { +static struct omap_device_pm_latency omap_uart_latency[] = { { - .irq = 70, - .flags = UPF_BOOT_AUTOCONF, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = OMAP24XX_BASE_BAUD * 16, - }, { - .flags = 0 - } + .deactivate_func = uart_idle_hwmod, + .activate_func = uart_enable_hwmod, + .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST, + }, }; -void __init omap2_set_globals_uart(struct omap_globals *omap2_globals) -{ - serial_platform_data0[0].mapbase = omap2_globals->uart1_phys; - serial_platform_data1[0].mapbase = omap2_globals->uart2_phys; - serial_platform_data2[0].mapbase = omap2_globals->uart3_phys; - serial_platform_data3[0].mapbase = omap2_globals->uart4_phys; -} - static inline unsigned int __serial_read_reg(struct uart_port *up, - int offset) + int offset) { offset <<= up->regshift; return (unsigned int)__raw_readb(up->membase + offset); } -static inline unsigned int serial_read_reg(struct plat_serial8250_port *up, +static inline unsigned int serial_read_reg(struct omap_uart_state *uart, int offset) { - offset <<= up->regshift; - return (unsigned int)__raw_readb(up->membase + offset); + offset <<= uart->regshift; + return (unsigned int)__raw_readb(uart->membase + offset); } static inline void __serial_write_reg(struct uart_port *up, int offset, @@ -161,11 +153,11 @@ static inline void __serial_write_reg(struct uart_port *up, int offset, __raw_writeb(value, up->membase + offset); } -static inline void serial_write_reg(struct plat_serial8250_port *p, int offset, +static inline void serial_write_reg(struct omap_uart_state *uart, int offset, int value) { - offset <<= p->regshift; - __raw_writeb(value, p->membase + offset); + offset <<= uart->regshift; + __raw_writeb(value, uart->membase + offset); } /* @@ -173,14 +165,12 @@ static inline void serial_write_reg(struct plat_serial8250_port *p, int offset, * properly. Note that the TX watermark initialization may not be needed * once the 8250.c watermark handling code is merged. */ + static inline void __init omap_uart_reset(struct omap_uart_state *uart) { - struct plat_serial8250_port *p = uart->p; - - serial_write_reg(p, UART_OMAP_MDR1, 0x07); - serial_write_reg(p, UART_OMAP_SCR, 0x08); - serial_write_reg(p, UART_OMAP_MDR1, 0x00); - serial_write_reg(p, UART_OMAP_SYSC, (0x02 << 3) | (1 << 2) | (1 << 0)); + serial_write_reg(uart, UART_OMAP_MDR1, 0x07); + serial_write_reg(uart, UART_OMAP_SCR, 0x08); + serial_write_reg(uart, UART_OMAP_MDR1, 0x00); } #if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3) @@ -197,24 +187,23 @@ static inline void __init omap_uart_reset(struct omap_uart_state *uart) static void omap_uart_mdr1_errataset(struct omap_uart_state *uart, u8 mdr1_val, u8 fcr_val) { - struct plat_serial8250_port *p = uart->p; u8 timeout = 255; - serial_write_reg(p, UART_OMAP_MDR1, mdr1_val); + serial_write_reg(uart, UART_OMAP_MDR1, mdr1_val); udelay(2); - serial_write_reg(p, UART_FCR, fcr_val | UART_FCR_CLEAR_XMIT | + serial_write_reg(uart, UART_FCR, fcr_val | UART_FCR_CLEAR_XMIT | UART_FCR_CLEAR_RCVR); /* * Wait for FIFO to empty: when empty, RX_FIFO_E bit is 0 and * TX_FIFO_E bit is 1. */ - while (UART_LSR_THRE != (serial_read_reg(p, UART_LSR) & + while (UART_LSR_THRE != (serial_read_reg(uart, UART_LSR) & (UART_LSR_THRE | UART_LSR_DR))) { timeout--; if (!timeout) { /* Should *never* happen. we warn and carry on */ - dev_crit(&uart->pdev.dev, "Errata i202: timedout %x\n", - serial_read_reg(p, UART_LSR)); + dev_crit(&uart->pdev->dev, "Errata i202: timedout %x\n", + serial_read_reg(uart, UART_LSR)); break; } udelay(1); @@ -224,23 +213,22 @@ static void omap_uart_mdr1_errataset(struct omap_uart_state *uart, u8 mdr1_val, static void omap_uart_save_context(struct omap_uart_state *uart) { u16 lcr = 0; - struct plat_serial8250_port *p = uart->p; if (!enable_off_mode) return; - lcr = serial_read_reg(p, UART_LCR); - serial_write_reg(p, UART_LCR, 0xBF); - uart->dll = serial_read_reg(p, UART_DLL); - uart->dlh = serial_read_reg(p, UART_DLM); - serial_write_reg(p, UART_LCR, lcr); - uart->ier = serial_read_reg(p, UART_IER); - uart->sysc = serial_read_reg(p, UART_OMAP_SYSC); - uart->scr = serial_read_reg(p, UART_OMAP_SCR); - uart->wer = serial_read_reg(p, UART_OMAP_WER); - serial_write_reg(p, UART_LCR, 0x80); - uart->mcr = serial_read_reg(p, UART_MCR); - serial_write_reg(p, UART_LCR, lcr); + lcr = serial_read_reg(uart, UART_LCR); + serial_write_reg(uart, UART_LCR, 0xBF); + uart->dll = serial_read_reg(uart, UART_DLL); + uart->dlh = serial_read_reg(uart, UART_DLM); + serial_write_reg(uart, UART_LCR, lcr); + uart->ier = serial_read_reg(uart, UART_IER); + uart->sysc = serial_read_reg(uart, UART_OMAP_SYSC); + uart->scr = serial_read_reg(uart, UART_OMAP_SCR); + uart->wer = serial_read_reg(uart, UART_OMAP_WER); + serial_write_reg(uart, UART_LCR, 0x80); + uart->mcr = serial_read_reg(uart, UART_MCR); + serial_write_reg(uart, UART_LCR, lcr); uart->context_valid = 1; } @@ -248,7 +236,6 @@ static void omap_uart_save_context(struct omap_uart_state *uart) static void omap_uart_restore_context(struct omap_uart_state *uart) { u16 efr = 0; - struct plat_serial8250_port *p = uart->p; if (!enable_off_mode) return; @@ -261,29 +248,30 @@ static void omap_uart_restore_context(struct omap_uart_state *uart) if (uart->errata & UART_ERRATA_i202_MDR1_ACCESS) omap_uart_mdr1_errataset(uart, 0x07, 0xA0); else - serial_write_reg(p, UART_OMAP_MDR1, 0x7); - serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */ - efr = serial_read_reg(p, UART_EFR); - serial_write_reg(p, UART_EFR, UART_EFR_ECB); - serial_write_reg(p, UART_LCR, 0x0); /* Operational mode */ - serial_write_reg(p, UART_IER, 0x0); - serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */ - serial_write_reg(p, UART_DLL, uart->dll); - serial_write_reg(p, UART_DLM, uart->dlh); - serial_write_reg(p, UART_LCR, 0x0); /* Operational mode */ - serial_write_reg(p, UART_IER, uart->ier); - serial_write_reg(p, UART_LCR, 0x80); - serial_write_reg(p, UART_MCR, uart->mcr); - serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */ - serial_write_reg(p, UART_EFR, efr); - serial_write_reg(p, UART_LCR, UART_LCR_WLEN8); - serial_write_reg(p, UART_OMAP_SCR, uart->scr); - serial_write_reg(p, UART_OMAP_WER, uart->wer); - serial_write_reg(p, UART_OMAP_SYSC, uart->sysc); + serial_write_reg(uart, UART_OMAP_MDR1, 0x7); + serial_write_reg(uart, UART_LCR, 0xBF); /* Config B mode */ + efr = serial_read_reg(uart, UART_EFR); + serial_write_reg(uart, UART_EFR, UART_EFR_ECB); + serial_write_reg(uart, UART_LCR, 0x0); /* Operational mode */ + serial_write_reg(uart, UART_IER, 0x0); + serial_write_reg(uart, UART_LCR, 0xBF); /* Config B mode */ + serial_write_reg(uart, UART_DLL, uart->dll); + serial_write_reg(uart, UART_DLM, uart->dlh); + serial_write_reg(uart, UART_LCR, 0x0); /* Operational mode */ + serial_write_reg(uart, UART_IER, uart->ier); + serial_write_reg(uart, UART_LCR, 0x80); + serial_write_reg(uart, UART_MCR, uart->mcr); + serial_write_reg(uart, UART_LCR, 0xBF); /* Config B mode */ + serial_write_reg(uart, UART_EFR, efr); + serial_write_reg(uart, UART_LCR, UART_LCR_WLEN8); + serial_write_reg(uart, UART_OMAP_SCR, uart->scr); + serial_write_reg(uart, UART_OMAP_WER, uart->wer); + serial_write_reg(uart, UART_OMAP_SYSC, uart->sysc); if (uart->errata & UART_ERRATA_i202_MDR1_ACCESS) omap_uart_mdr1_errataset(uart, 0x00, 0xA1); else - serial_write_reg(p, UART_OMAP_MDR1, 0x00); /* UART 16x mode */ + /* UART 16x mode */ + serial_write_reg(uart, UART_OMAP_MDR1, 0x00); } #else static inline void omap_uart_save_context(struct omap_uart_state *uart) {} @@ -295,8 +283,7 @@ static inline void omap_uart_enable_clocks(struct omap_uart_state *uart) if (uart->clocked) return; - clk_enable(uart->ick); - clk_enable(uart->fck); + omap_device_enable(uart->pdev); uart->clocked = 1; omap_uart_restore_context(uart); } @@ -310,8 +297,7 @@ static inline void omap_uart_disable_clocks(struct omap_uart_state *uart) omap_uart_save_context(uart); uart->clocked = 0; - clk_disable(uart->ick); - clk_disable(uart->fck); + omap_device_idle(uart->pdev); } static void omap_uart_enable_wakeup(struct omap_uart_state *uart) @@ -349,18 +335,24 @@ static void omap_uart_disable_wakeup(struct omap_uart_state *uart) } static void omap_uart_smart_idle_enable(struct omap_uart_state *uart, - int enable) + int enable) { - struct plat_serial8250_port *p = uart->p; - u16 sysc; + u8 idlemode; - sysc = serial_read_reg(p, UART_OMAP_SYSC) & 0x7; - if (enable) - sysc |= 0x2 << 3; - else - sysc |= 0x1 << 3; + if (enable) { + /** + * Errata 2.15: [UART]:Cannot Acknowledge Idle Requests + * in Smartidle Mode When Configured for DMA Operations. + */ + if (uart->dma_enabled) + idlemode = HWMOD_IDLEMODE_FORCE; + else + idlemode = HWMOD_IDLEMODE_SMART; + } else { + idlemode = HWMOD_IDLEMODE_NO; + } - serial_write_reg(p, UART_OMAP_SYSC, sysc); + omap_hwmod_set_slave_idlemode(uart->oh, idlemode); } static void omap_uart_block_sleep(struct omap_uart_state *uart) @@ -377,7 +369,7 @@ static void omap_uart_block_sleep(struct omap_uart_state *uart) static void omap_uart_allow_sleep(struct omap_uart_state *uart) { - if (device_may_wakeup(&uart->pdev.dev)) + if (device_may_wakeup(&uart->pdev->dev)) omap_uart_enable_wakeup(uart); else omap_uart_disable_wakeup(uart); @@ -472,6 +464,7 @@ int omap_uart_can_sleep(void) * UART will not idle or sleep for its timeout period. * **/ +/* static int first_interrupt; */ static irqreturn_t omap_uart_interrupt(int irq, void *dev_id) { struct omap_uart_state *uart = dev_id; @@ -483,7 +476,6 @@ static irqreturn_t omap_uart_interrupt(int irq, void *dev_id) static void omap_uart_idle_init(struct omap_uart_state *uart) { - struct plat_serial8250_port *p = uart->p; int ret; uart->can_sleep = 0; @@ -495,7 +487,7 @@ static void omap_uart_idle_init(struct omap_uart_state *uart) omap_uart_smart_idle_enable(uart, 0); if (cpu_is_omap34xx()) { - u32 mod = (uart->num == 2) ? OMAP3430_PER_MOD : CORE_MOD; + u32 mod = (uart->num > 1) ? OMAP3430_PER_MOD : CORE_MOD; u32 wk_mask = 0; u32 padconf = 0; @@ -514,6 +506,10 @@ static void omap_uart_idle_init(struct omap_uart_state *uart) wk_mask = OMAP3430_ST_UART3_MASK; padconf = 0x19e; break; + case 3: + wk_mask = OMAP3630_ST_UART4_MASK; + padconf = 0x0d2; + break; } uart->wk_mask = wk_mask; uart->padconf = padconf; @@ -546,9 +542,9 @@ static void omap_uart_idle_init(struct omap_uart_state *uart) uart->padconf = 0; } - p->irqflags |= IRQF_SHARED; - ret = request_irq(p->irq, omap_uart_interrupt, IRQF_SHARED, - "serial idle", (void *)uart); + uart->irqflags |= IRQF_SHARED; + ret = request_threaded_irq(uart->irq, NULL, omap_uart_interrupt, + IRQF_SHARED, "serial idle", (void *)uart); WARN_ON(ret); } @@ -558,11 +554,17 @@ void omap_uart_enable_irqs(int enable) struct omap_uart_state *uart; list_for_each_entry(uart, &uart_list, node) { - if (enable) - ret = request_irq(uart->p->irq, omap_uart_interrupt, - IRQF_SHARED, "serial idle", (void *)uart); - else - free_irq(uart->p->irq, (void *)uart); + if (enable) { + pm_runtime_put_sync(&uart->pdev->dev); + ret = request_threaded_irq(uart->irq, NULL, + omap_uart_interrupt, + IRQF_SHARED, + "serial idle", + (void *)uart); + } else { + pm_runtime_get_noresume(&uart->pdev->dev); + free_irq(uart->irq, (void *)uart); + } } } @@ -570,10 +572,9 @@ static ssize_t sleep_timeout_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct platform_device *pdev = container_of(dev, - struct platform_device, dev); - struct omap_uart_state *uart = container_of(pdev, - struct omap_uart_state, pdev); + struct platform_device *pdev = to_platform_device(dev); + struct omap_device *odev = to_omap_device(pdev); + struct omap_uart_state *uart = odev->hwmods[0]->dev_attr; return sprintf(buf, "%u\n", uart->timeout / HZ); } @@ -582,10 +583,9 @@ static ssize_t sleep_timeout_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t n) { - struct platform_device *pdev = container_of(dev, - struct platform_device, dev); - struct omap_uart_state *uart = container_of(pdev, - struct omap_uart_state, pdev); + struct platform_device *pdev = to_platform_device(dev); + struct omap_device *odev = to_omap_device(pdev); + struct omap_uart_state *uart = odev->hwmods[0]->dev_attr; unsigned int value; if (sscanf(buf, "%u", &value) != 1) { @@ -608,48 +608,11 @@ static DEVICE_ATTR(sleep_timeout, 0644, sleep_timeout_show, #define DEV_CREATE_FILE(dev, attr) WARN_ON(device_create_file(dev, attr)) #else static inline void omap_uart_idle_init(struct omap_uart_state *uart) {} +static void omap_uart_block_sleep(struct omap_uart_state *uart) {} #define DEV_CREATE_FILE(dev, attr) #endif /* CONFIG_PM */ -static struct omap_uart_state omap_uart[] = { - { - .pdev = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = serial_platform_data0, - }, - }, - }, { - .pdev = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM1, - .dev = { - .platform_data = serial_platform_data1, - }, - }, - }, { - .pdev = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM2, - .dev = { - .platform_data = serial_platform_data2, - }, - }, - }, -#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) - { - .pdev = { - .name = "serial8250", - .id = 3, - .dev = { - .platform_data = serial_platform_data3, - }, - }, - }, -#endif -}; - +#ifndef CONFIG_SERIAL_OMAP /* * Override the default 8250 read handler: mem_serial_in() * Empty RX fifo read causes an abort on omap3630 and omap4 @@ -682,71 +645,44 @@ static void serial_out_override(struct uart_port *up, int offset, int value) } __serial_write_reg(up, offset, value); } +#endif + void __init omap_serial_early_init(void) { - int i, nr_ports; - char name[16]; + int i = 0; - if (!(cpu_is_omap3630() || cpu_is_omap4430())) - nr_ports = 3; - else - nr_ports = ARRAY_SIZE(omap_uart); + do { + char oh_name[MAX_UART_HWMOD_NAME_LEN]; + struct omap_hwmod *oh; + struct omap_uart_state *uart; - /* - * Make sure the serial ports are muxed on at this point. - * You have to mux them off in device drivers later on - * if not needed. - */ + snprintf(oh_name, MAX_UART_HWMOD_NAME_LEN, + "uart%d", i + 1); + oh = omap_hwmod_lookup(oh_name); + if (!oh) + break; - for (i = 0; i < nr_ports; i++) { - struct omap_uart_state *uart = &omap_uart[i]; - struct platform_device *pdev = &uart->pdev; - struct device *dev = &pdev->dev; - struct plat_serial8250_port *p = dev->platform_data; + uart = kzalloc(sizeof(struct omap_uart_state), GFP_KERNEL); + if (WARN_ON(!uart)) + return; + + uart->oh = oh; + uart->num = i++; + list_add_tail(&uart->node, &uart_list); + num_uarts++; - /* Don't map zero-based physical address */ - if (p->mapbase == 0) { - dev_warn(dev, "no physical address for uart#%d," - " so skipping early_init...\n", i); - continue; - } /* - * Module 4KB + L4 interconnect 4KB - * Static mapping, never released + * NOTE: omap_hwmod_init() has not yet been called, + * so no hwmod functions will work yet. */ - p->membase = ioremap(p->mapbase, SZ_8K); - if (!p->membase) { - dev_err(dev, "ioremap failed for uart%i\n", i + 1); - continue; - } - - sprintf(name, "uart%d_ick", i + 1); - uart->ick = clk_get(NULL, name); - if (IS_ERR(uart->ick)) { - dev_err(dev, "Could not get uart%d_ick\n", i + 1); - uart->ick = NULL; - } - - sprintf(name, "uart%d_fck", i+1); - uart->fck = clk_get(NULL, name); - if (IS_ERR(uart->fck)) { - dev_err(dev, "Could not get uart%d_fck\n", i + 1); - uart->fck = NULL; - } - - /* FIXME: Remove this once the clkdev is ready */ - if (!cpu_is_omap44xx()) { - if (!uart->ick || !uart->fck) - continue; - } - - uart->num = i; - p->private_data = uart; - uart->p = p; - if (cpu_is_omap44xx()) - p->irq += 32; - } + /* + * During UART early init, device need to be probed + * to determine SoC specific init before omap_device + * is ready. Therefore, don't allow idle here + */ + uart->oh->flags |= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET; + } while (1); } /** @@ -763,53 +699,135 @@ void __init omap_serial_early_init(void) void __init omap_serial_init_port(int port) { struct omap_uart_state *uart; - struct platform_device *pdev; - struct device *dev; - - BUG_ON(port < 0); - BUG_ON(port >= ARRAY_SIZE(omap_uart)); - - uart = &omap_uart[port]; - pdev = &uart->pdev; - dev = &pdev->dev; + struct omap_hwmod *oh; + struct omap_device *od; + void *pdata = NULL; + u32 pdata_size = 0; + char *name; +#ifndef CONFIG_SERIAL_OMAP + struct plat_serial8250_port ports[2] = { + {}, + {.flags = 0}, + }; + struct plat_serial8250_port *p = &ports[0]; +#else + struct omap_uart_port_info omap_up; +#endif - /* Don't proceed if there's no clocks available */ - if (unlikely(!uart->ick || !uart->fck)) { - WARN(1, "%s: can't init uart%d, no clocks available\n", - kobject_name(&dev->kobj), port); + if (WARN_ON(port < 0)) + return; + if (WARN_ON(port >= num_uarts)) return; - } - - omap_uart_enable_clocks(uart); - - omap_uart_reset(uart); - omap_uart_idle_init(uart); - list_add_tail(&uart->node, &uart_list); + list_for_each_entry(uart, &uart_list, node) + if (port == uart->num) + break; - if (WARN_ON(platform_device_register(pdev))) - return; + oh = uart->oh; + uart->dma_enabled = 0; +#ifndef CONFIG_SERIAL_OMAP + name = "serial8250"; - if ((cpu_is_omap34xx() && uart->padconf) || - (uart->wk_en && uart->wk_mask)) { - device_init_wakeup(dev, true); - DEV_CREATE_FILE(dev, &dev_attr_sleep_timeout); - } + /* + * !! 8250 driver does not use standard IORESOURCE* It + * has it's own custom pdata that can be taken from + * the hwmod resource data. But, this needs to be + * done after the build. + * + * ?? does it have to be done before the register ?? + * YES, because platform_device_data_add() copies + * pdata, it does not use a pointer. + */ + p->flags = UPF_BOOT_AUTOCONF; + p->iotype = UPIO_MEM; + p->regshift = 2; + p->uartclk = OMAP24XX_BASE_BAUD * 16; + p->irq = oh->mpu_irqs[0].irq; + p->mapbase = oh->slaves[0]->addr->pa_start; + p->membase = omap_hwmod_get_mpu_rt_va(oh); + p->irqflags = IRQF_SHARED; + p->private_data = uart; /* * omap44xx: Never read empty UART fifo * omap3xxx: Never read empty UART fifo on UARTs * with IP rev >=0x52 */ + uart->regshift = p->regshift; + uart->membase = p->membase; if (cpu_is_omap44xx()) uart->errata |= UART_ERRATA_FIFO_FULL_ABORT; - else if ((serial_read_reg(uart->p, UART_OMAP_MVER) & 0xFF) + else if ((serial_read_reg(uart, UART_OMAP_MVER) & 0xFF) >= UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV) uart->errata |= UART_ERRATA_FIFO_FULL_ABORT; if (uart->errata & UART_ERRATA_FIFO_FULL_ABORT) { - uart->p->serial_in = serial_in_override; - uart->p->serial_out = serial_out_override; + p->serial_in = serial_in_override; + p->serial_out = serial_out_override; + } + + pdata = &ports[0]; + pdata_size = 2 * sizeof(struct plat_serial8250_port); +#else + + name = DRIVER_NAME; + + omap_up.dma_enabled = uart->dma_enabled; + omap_up.uartclk = OMAP24XX_BASE_BAUD * 16; + omap_up.mapbase = oh->slaves[0]->addr->pa_start; + omap_up.membase = omap_hwmod_get_mpu_rt_va(oh); + omap_up.irqflags = IRQF_SHARED; + omap_up.flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ; + + pdata = &omap_up; + pdata_size = sizeof(struct omap_uart_port_info); +#endif + + if (WARN_ON(!oh)) + return; + + od = omap_device_build(name, uart->num, oh, pdata, pdata_size, + omap_uart_latency, + ARRAY_SIZE(omap_uart_latency), false); + WARN(IS_ERR(od), "Could not build omap_device for %s: %s.\n", + name, oh->name); + + uart->irq = oh->mpu_irqs[0].irq; + uart->regshift = 2; + uart->mapbase = oh->slaves[0]->addr->pa_start; + uart->membase = omap_hwmod_get_mpu_rt_va(oh); + uart->pdev = &od->pdev; + + oh->dev_attr = uart; + + /* + * Because of early UART probing, UART did not get idled + * on init. Now that omap_device is ready, ensure full idle + * before doing omap_device_enable(). + */ + omap_hwmod_idle(uart->oh); + + omap_device_enable(uart->pdev); + omap_uart_idle_init(uart); + omap_uart_reset(uart); + omap_hwmod_enable_wakeup(uart->oh); + omap_device_idle(uart->pdev); + + /* + * Need to block sleep long enough for interrupt driven + * driver to start. Console driver is in polling mode + * so device needs to be kept enabled while polling driver + * is in use. + */ + if (uart->timeout) + uart->timeout = (30 * HZ); + omap_uart_block_sleep(uart); + uart->timeout = DEFAULT_TIMEOUT; + + if ((cpu_is_omap34xx() && uart->padconf) || + (uart->wk_en && uart->wk_mask)) { + device_init_wakeup(&od->pdev.dev, true); + DEV_CREATE_FILE(&od->pdev.dev, &dev_attr_sleep_timeout); } /* Enable the MDR1 errata for OMAP3 */ @@ -826,13 +844,8 @@ void __init omap_serial_init_port(int port) */ void __init omap_serial_init(void) { - int i, nr_ports; - - if (!(cpu_is_omap3630() || cpu_is_omap4430())) - nr_ports = 3; - else - nr_ports = ARRAY_SIZE(omap_uart); + struct omap_uart_state *uart; - for (i = 0; i < nr_ports; i++) - omap_serial_init_port(i); + list_for_each_entry(uart, &uart_list, node) + omap_serial_init_port(uart->num); } |