1 files changed, 119 insertions, 0 deletions
diff --git a/arch/arm/mach-sa1100/nanoengine.c b/arch/arm/mach-sa1100/nanoengine.c
new file mode 100644
index 000000000000..72087f0658b7
--- /dev/null
+++ b/arch/arm/mach-sa1100/nanoengine.c
@@ -0,0 +1,119 @@
+/*
+ * linux/arch/arm/mach-sa1100/nanoengine.c
+ *
+ * Bright Star Engineering's nanoEngine board init code.
+ *
+ * Copyright (C) 2010 Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/root_dev.h>
+
+#include <asm/mach-types.h>
+#include <asm/setup.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+#include <asm/mach/map.h>
+#include <asm/mach/serial_sa1100.h>
+
+#include <mach/hardware.h>
+#include <mach/nanoengine.h>
+
+#include "generic.h"
+
+/* Flash bank 0 */
+static struct mtd_partition nanoengine_partitions[] = {
+	{
+		.name	= "nanoEngine boot firmware and parameter table",
+		.size		= 0x00010000,  /* 32K */
+		.offset		= 0,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "kernel/initrd reserved",
+		.size		= 0x002f0000,
+		.offset		= 0x00010000,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "experimental filesystem allocation",
+		.size		= 0x00100000,
+		.offset		= 0x00300000,
+		.mask_flags	= MTD_WRITEABLE,
+	}
+};
+
+static struct flash_platform_data nanoengine_flash_data = {
+	.map_name	= "jedec_probe",
+	.parts		= nanoengine_partitions,
+	.nr_parts	= ARRAY_SIZE(nanoengine_partitions),
+};
+
+static struct resource nanoengine_flash_resources[] = {
+	{
+		.start	= SA1100_CS0_PHYS,
+		.end	= SA1100_CS0_PHYS + SZ_32M - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= SA1100_CS1_PHYS,
+		.end	= SA1100_CS1_PHYS + SZ_32M - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct map_desc nanoengine_io_desc[] __initdata = {
+	{
+		/* System Registers */
+		.virtual	= 0xf0000000,
+		.pfn		= __phys_to_pfn(0x10000000),
+		.length		= 0x00100000,
+		.type		= MT_DEVICE
+	}, {
+		/* Internal PCI Memory Read/Write */
+		.virtual	= NANO_PCI_MEM_RW_VIRT,
+		.pfn		= __phys_to_pfn(NANO_PCI_MEM_RW_PHYS),
+		.length		= NANO_PCI_MEM_RW_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		/* Internal PCI Config Space */
+		.virtual	= NANO_PCI_CONFIG_SPACE_VIRT,
+		.pfn		= __phys_to_pfn(NANO_PCI_CONFIG_SPACE_PHYS),
+		.length		= NANO_PCI_CONFIG_SPACE_SIZE,
+		.type		= MT_DEVICE
+	}
+};
+
+static void __init nanoengine_map_io(void)
+{
+	sa1100_map_io();
+	iotable_init(nanoengine_io_desc, ARRAY_SIZE(nanoengine_io_desc));
+
+	sa1100_register_uart(0, 1);
+	sa1100_register_uart(1, 2);
+	sa1100_register_uart(2, 3);
+	Ser1SDCR0 |= SDCR0_UART;
+	/* disable IRDA -- UART2 is used as a normal serial port */
+	Ser2UTCR4 = 0;
+	Ser2HSCR0 = 0;
+}
+
+static void __init nanoengine_init(void)
+{
+	sa11x0_register_mtd(&nanoengine_flash_data, nanoengine_flash_resources,
+		ARRAY_SIZE(nanoengine_flash_resources));
+}
+
+MACHINE_START(NANOENGINE, "BSE nanoEngine")
+	.boot_params	= 0xc0000000,
+	.map_io		= nanoengine_map_io,
+	.init_irq	= sa1100_init_irq,
+	.timer		= &sa1100_timer,
+	.init_machine	= nanoengine_init,
+MACHINE_END