diff options
Diffstat (limited to 'arch/arm64')
586 files changed, 59213 insertions, 15413 deletions
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index 03934808b2ed..27b2592698b0 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -123,6 +123,8 @@ config ARM64 select DMA_DIRECT_REMAP select EDAC_SUPPORT select FRAME_POINTER + select FUNCTION_ALIGNMENT_4B + select FUNCTION_ALIGNMENT_8B if DYNAMIC_FTRACE_WITH_CALL_OPS select GENERIC_ALLOCATOR select GENERIC_ARCH_TOPOLOGY select GENERIC_CLOCKEVENTS_BROADCAST @@ -184,8 +186,8 @@ config ARM64 select HAVE_DEBUG_KMEMLEAK select HAVE_DMA_CONTIGUOUS select HAVE_DYNAMIC_FTRACE - select HAVE_DYNAMIC_FTRACE_WITH_ARGS \ - if $(cc-option,-fpatchable-function-entry=2) + select HAVE_DYNAMIC_FTRACE_WITH_CALL_OPS \ + if (DYNAMIC_FTRACE_WITH_ARGS && !CFI_CLANG) select FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY \ if DYNAMIC_FTRACE_WITH_ARGS select HAVE_EFFICIENT_UNALIGNED_ACCESS @@ -972,6 +974,22 @@ config ARM64_ERRATUM_2457168 If unsure, say Y. +config ARM64_ERRATUM_2645198 + bool "Cortex-A715: 2645198: Workaround possible [ESR|FAR]_ELx corruption" + default y + help + This option adds the workaround for ARM Cortex-A715 erratum 2645198. + + If a Cortex-A715 cpu sees a page mapping permissions change from executable + to non-executable, it may corrupt the ESR_ELx and FAR_ELx registers on the + next instruction abort caused by permission fault. + + Only user-space does executable to non-executable permission transition via + mprotect() system call. Workaround the problem by doing a break-before-make + TLB invalidation, for all changes to executable user space mappings. + + If unsure, say Y. + config CAVIUM_ERRATUM_22375 bool "Cavium erratum 22375, 24313" default y @@ -1456,10 +1474,23 @@ config XEN help Say Y if you want to run Linux in a Virtual Machine on Xen on ARM64. +# include/linux/mmzone.h requires the following to be true: +# +# MAX_ORDER - 1 + PAGE_SHIFT <= SECTION_SIZE_BITS +# +# so the maximum value of MAX_ORDER is SECTION_SIZE_BITS + 1 - PAGE_SHIFT: +# +# | SECTION_SIZE_BITS | PAGE_SHIFT | max MAX_ORDER | default MAX_ORDER | +# ----+-------------------+--------------+-----------------+--------------------+ +# 4K | 27 | 12 | 16 | 11 | +# 16K | 27 | 14 | 14 | 12 | +# 64K | 29 | 16 | 14 | 14 | config ARCH_FORCE_MAX_ORDER - int + int "Maximum zone order" if ARM64_4K_PAGES || ARM64_16K_PAGES default "14" if ARM64_64K_PAGES + range 12 14 if ARM64_16K_PAGES default "12" if ARM64_16K_PAGES + range 11 16 if ARM64_4K_PAGES default "11" help The kernel memory allocator divides physically contiguous memory @@ -1472,7 +1503,7 @@ config ARCH_FORCE_MAX_ORDER This config option is actually maximum order plus one. For example, a value of 11 means that the largest free memory block is 2^10 pages. - We make sure that we can allocate upto a HugePage size for each configuration. + We make sure that we can allocate up to a HugePage size for each configuration. Hence we have : MAX_ORDER = (PMD_SHIFT - PAGE_SHIFT) + 1 => PAGE_SHIFT - 2 @@ -1818,7 +1849,7 @@ config ARM64_PTR_AUTH_KERNEL bool "Use pointer authentication for kernel" default y depends on ARM64_PTR_AUTH - depends on (CC_HAS_SIGN_RETURN_ADDRESS || CC_HAS_BRANCH_PROT_PAC_RET) && AS_HAS_PAC + depends on (CC_HAS_SIGN_RETURN_ADDRESS || CC_HAS_BRANCH_PROT_PAC_RET) && AS_HAS_ARMV8_3 # Modern compilers insert a .note.gnu.property section note for PAC # which is only understood by binutils starting with version 2.33.1. depends on LD_IS_LLD || LD_VERSION >= 23301 || (CC_IS_GCC && GCC_VERSION < 90100) @@ -1843,7 +1874,7 @@ config CC_HAS_SIGN_RETURN_ADDRESS # GCC 7, 8 def_bool $(cc-option,-msign-return-address=all) -config AS_HAS_PAC +config AS_HAS_ARMV8_3 def_bool $(cc-option,-Wa$(comma)-march=armv8.3-a) config AS_HAS_CFI_NEGATE_RA_STATE diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms index d1970adf80ab..89a0b13b058d 100644 --- a/arch/arm64/Kconfig.platforms +++ b/arch/arm64/Kconfig.platforms @@ -95,7 +95,7 @@ config ARCH_BITMAIN This enables support for the Bitmain SoC Family. config ARCH_EXYNOS - bool "ARMv8 based Samsung Exynos SoC family" + bool "Samsung Exynos SoC family" select COMMON_CLK_SAMSUNG select CLKSRC_EXYNOS_MCT select EXYNOS_PM_DOMAINS if PM_GENERIC_DOMAINS @@ -108,7 +108,7 @@ config ARCH_EXYNOS This enables support for ARMv8 based Samsung Exynos SoC family. config ARCH_SPARX5 - bool "ARMv8 based Microchip Sparx5 SoC family" + bool "Microchip Sparx5 SoC family" select PINCTRL select DW_APB_TIMER_OF help @@ -187,7 +187,7 @@ config ARCH_MVEBU select PINCTRL_ARMADA_CP110 select PINCTRL_AC5 help - This enables support for Marvell EBU familly, including: + This enables support for Marvell EBU family, including: - Armada 3700 SoC Family - Armada 7K SoC Family - Armada 8K SoC Family @@ -199,13 +199,13 @@ menuconfig ARCH_NXP if ARCH_NXP config ARCH_LAYERSCAPE - bool "ARMv8 based Freescale Layerscape SoC family" + bool "Freescale Layerscape SoC family" select EDAC_SUPPORT help This enables support for the Freescale Layerscape SoC family. config ARCH_MXC - bool "ARMv8 based NXP i.MX SoC family" + bool "NXP i.MX SoC family" select ARM64_ERRATUM_843419 select ARM64_ERRATUM_845719 if COMPAT select IMX_GPCV2 @@ -296,7 +296,7 @@ config ARCH_TEGRA This enables support for the NVIDIA Tegra SoC family. config ARCH_TESLA_FSD - bool "ARMv8 based Tesla platform" + bool "Tesla platform" depends on ARCH_EXYNOS help Support for ARMv8 based Tesla platforms. diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile index d62bd221828f..2d49aea0ff67 100644 --- a/arch/arm64/Makefile +++ b/arch/arm64/Makefile @@ -63,50 +63,37 @@ stack_protector_prepare: prepare0 include/generated/asm-offsets.h)) endif -ifeq ($(CONFIG_AS_HAS_ARMV8_2), y) -# make sure to pass the newest target architecture to -march. -asm-arch := armv8.2-a -endif - -# Ensure that if the compiler supports branch protection we default it -# off, this will be overridden if we are using branch protection. -branch-prot-flags-y += $(call cc-option,-mbranch-protection=none) - -ifeq ($(CONFIG_ARM64_PTR_AUTH_KERNEL),y) -branch-prot-flags-$(CONFIG_CC_HAS_SIGN_RETURN_ADDRESS) := -msign-return-address=all -# We enable additional protection for leaf functions as there is some -# narrow potential for ROP protection benefits and no substantial -# performance impact has been observed. -PACRET-y := pac-ret+leaf - -# Using a shadow call stack in leaf functions is too costly, so avoid PAC there -# as well when we may be patching PAC into SCS -PACRET-$(CONFIG_UNWIND_PATCH_PAC_INTO_SCS) := pac-ret - ifeq ($(CONFIG_ARM64_BTI_KERNEL),y) -branch-prot-flags-$(CONFIG_CC_HAS_BRANCH_PROT_PAC_RET_BTI) := -mbranch-protection=$(PACRET-y)+bti + KBUILD_CFLAGS += -mbranch-protection=pac-ret+bti +else ifeq ($(CONFIG_ARM64_PTR_AUTH_KERNEL),y) + ifeq ($(CONFIG_CC_HAS_BRANCH_PROT_PAC_RET),y) + KBUILD_CFLAGS += -mbranch-protection=pac-ret + else + KBUILD_CFLAGS += -msign-return-address=non-leaf + endif else -branch-prot-flags-$(CONFIG_CC_HAS_BRANCH_PROT_PAC_RET) := -mbranch-protection=$(PACRET-y) -endif -# -march=armv8.3-a enables the non-nops instructions for PAC, to avoid the -# compiler to generate them and consequently to break the single image contract -# we pass it only to the assembler. This option is utilized only in case of non -# integrated assemblers. -ifeq ($(CONFIG_AS_HAS_PAC), y) -asm-arch := armv8.3-a -endif -endif - -KBUILD_CFLAGS += $(branch-prot-flags-y) - -ifeq ($(CONFIG_AS_HAS_ARMV8_4), y) -# make sure to pass the newest target architecture to -march. -asm-arch := armv8.4-a + KBUILD_CFLAGS += $(call cc-option,-mbranch-protection=none) endif +# Tell the assembler to support instructions from the latest target +# architecture. +# +# For non-integrated assemblers we'll pass this on the command line, and for +# integrated assemblers we'll define ARM64_ASM_ARCH and ARM64_ASM_PREAMBLE for +# inline usage. +# +# We cannot pass the same arch flag to the compiler as this would allow it to +# freely generate instructions which are not supported by earlier architecture +# versions, which would prevent a single kernel image from working on earlier +# hardware. ifeq ($(CONFIG_AS_HAS_ARMV8_5), y) -# make sure to pass the newest target architecture to -march. -asm-arch := armv8.5-a + asm-arch := armv8.5-a +else ifeq ($(CONFIG_AS_HAS_ARMV8_4), y) + asm-arch := armv8.4-a +else ifeq ($(CONFIG_AS_HAS_ARMV8_3), y) + asm-arch := armv8.3-a +else ifeq ($(CONFIG_AS_HAS_ARMV8_2), y) + asm-arch := armv8.2-a endif ifdef asm-arch @@ -139,7 +126,10 @@ endif CHECKFLAGS += -D__aarch64__ -ifeq ($(CONFIG_DYNAMIC_FTRACE_WITH_ARGS),y) +ifeq ($(CONFIG_DYNAMIC_FTRACE_WITH_CALL_OPS),y) + KBUILD_CPPFLAGS += -DCC_USING_PATCHABLE_FUNCTION_ENTRY + CC_FLAGS_FTRACE := -fpatchable-function-entry=4,2 +else ifeq ($(CONFIG_DYNAMIC_FTRACE_WITH_ARGS),y) KBUILD_CPPFLAGS += -DCC_USING_PATCHABLE_FUNCTION_ENTRY CC_FLAGS_FTRACE := -fpatchable-function-entry=2 endif @@ -215,6 +205,12 @@ ifdef CONFIG_COMPAT_VDSO endif endif +include $(srctree)/scripts/Makefile.defconf + +PHONY += virtconfig +virtconfig: + $(call merge_into_defconfig_override,defconfig,virt) + define archhelp echo '* Image.gz - Compressed kernel image (arch/$(ARCH)/boot/Image.gz)' echo ' Image - Uncompressed kernel image (arch/$(ARCH)/boot/Image)' diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index 77b5349f6087..62f45f71ec65 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi @@ -1199,6 +1199,7 @@ compatible = "allwinner,sun50i-a64-mipi-dphy", "allwinner,sun6i-a31-mipi-dphy"; reg = <0x01ca1000 0x1000>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_MIPI_DSI>, <&ccu CLK_DSI_DPHY>; clock-names = "bus", "mod"; diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi index 55c5e1fdddc7..41c9eb51d0ee 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi @@ -134,9 +134,8 @@ ranges = <0 0 0 0xffffffff>; base_fpga_region { - #address-cells = <0x1>; - #size-cells = <0x1>; - + #address-cells = <0x2>; + #size-cells = <0x2>; compatible = "fpga-region"; fpga-mgr = <&fpga_mgr>; }; @@ -353,6 +352,22 @@ reset-names = "dma", "dma-ocp"; }; + pinctrl0: pinctrl@ffd13000 { + compatible = "pinctrl-single"; + reg = <0xffd13000 0xA0>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x0000000f>; + }; + + pinctrl1: pinctrl@ffd13100 { + compatible = "pinctrl-single"; + reg = <0xffd13100 0x20>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x0000000f>; + }; + rst: rstmgr@ffd11000 { #reset-cells = <1>; compatible = "altr,stratix10-rst-mgr"; diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts index 17752ca743e5..38ae674f2f02 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts @@ -65,6 +65,22 @@ }; }; +&pinctrl0 { + i2c1_pmx_func: i2c1-pmx-func { + pinctrl-single,pins = < + 0x78 0x4 /* I2C1_SDA (IO6-B) PIN30SEL) */ + 0x7c 0x4 /* I2C1_SCL (IO7-B) PIN31SEL */ + >; + }; + + i2c1_pmx_func_gpio: i2c1-pmx-func-gpio { + pinctrl-single,pins = < + 0x78 0x8 /* I2C1_SDA (IO6-B) PIN30SEL) */ + 0x7c 0x8 /* I2C1_SCL (IO7-B) PIN31SEL */ + >; + }; +}; + &gpio1 { status = "okay"; }; @@ -131,6 +147,13 @@ i2c-sda-falling-time-ns = <890>; /* hcnt */ i2c-sdl-falling-time-ns = <890>; /* lcnt */ + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&i2c1_pmx_func>; + pinctrl-1 = <&i2c1_pmx_func_gpio>; + + scl-gpios = <&portb 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&portb 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + adc@14 { compatible = "lltc,ltc2497"; reg = <0x14>; diff --git a/arch/arm64/boot/dts/amazon/alpine-v2.dtsi b/arch/arm64/boot/dts/amazon/alpine-v2.dtsi index 4eb2cd14e00b..dccbba6e7f98 100644 --- a/arch/arm64/boot/dts/amazon/alpine-v2.dtsi +++ b/arch/arm64/boot/dts/amazon/alpine-v2.dtsi @@ -159,7 +159,6 @@ uart0: serial@1883000 { compatible = "ns16550a"; - device_type = "serial"; reg = <0x1883000 0x1000>; interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <500000000>; @@ -170,7 +169,6 @@ uart1: serial@1884000 { compatible = "ns16550a"; - device_type = "serial"; reg = <0x1884000 0x1000>; interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <500000000>; @@ -181,7 +179,6 @@ uart2: serial@1885000 { compatible = "ns16550a"; - device_type = "serial"; reg = <0x1885000 0x1000>; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <500000000>; @@ -192,7 +189,6 @@ uart3: serial@1886000 { compatible = "ns16550a"; - device_type = "serial"; reg = <0x1886000 0x1000>; interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <500000000>; diff --git a/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts index 02bff65e5fd6..21149acb6b31 100644 --- a/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts +++ b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts @@ -26,7 +26,7 @@ }; &ccp0 { - status = "ok"; + status = "okay"; amd,zlib-support = <1>; }; @@ -34,31 +34,31 @@ * NOTE: In Rev.B, gpio0 is reserved. */ &gpio1 { - status = "ok"; + status = "okay"; }; &gpio4 { - status = "ok"; + status = "okay"; }; &i2c0 { - status = "ok"; + status = "okay"; }; &i2c1 { - status = "ok"; + status = "okay"; }; &pcie0 { - status = "ok"; + status = "okay"; }; &spi0 { - status = "ok"; + status = "okay"; }; &spi1 { - status = "ok"; + status = "okay"; sdcard0: sdcard@0 { compatible = "mmc-spi-slot"; reg = <0>; diff --git a/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts index 07dab1f1e3c8..99205ae1b46b 100644 --- a/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts +++ b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts @@ -26,7 +26,7 @@ }; &ccp0 { - status = "ok"; + status = "okay"; amd,zlib-support = <1>; }; @@ -34,43 +34,43 @@ * NOTE: In Rev.B, gpio0 is reserved. */ &gpio1 { - status = "ok"; + status = "okay"; }; &gpio2 { - status = "ok"; + status = "okay"; }; &gpio3 { - status = "ok"; + status = "okay"; }; &gpio4 { - status = "ok"; + status = "okay"; }; &i2c0 { - status = "ok"; + status = "okay"; }; &i2c1 { - status = "ok"; + status = "okay"; }; &pcie0 { - status = "ok"; + status = "okay"; }; &sata1 { - status = "ok"; + status = "okay"; }; &spi0 { - status = "ok"; + status = "okay"; }; &spi1 { - status = "ok"; + status = "okay"; sdcard0: sdcard@0 { compatible = "mmc-spi-slot"; reg = <0>; @@ -85,7 +85,7 @@ }; &ipmi_kcs { - status = "ok"; + status = "okay"; }; &smb0 { diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index 97b42e2100e0..ccf1ba57fa87 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -15,6 +15,8 @@ dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-go-ultra.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2-plus.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2l.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-g12b-radxa-zero2.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-s922x-khadas-vim3.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-ugoos-am6.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-kii-pro.dtb @@ -60,6 +62,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxm-wetek-core2.dtb dtb-$(CONFIG_ARCH_MESON) += meson-s4-s805x2-aq222.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-a95xf3-air-gbit.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-a95xf3-air.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-sm1-bananapi-m2-pro.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-bananapi-m5.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-h96-max.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l.dtb diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi index 5836b0030931..e1605a9b0a13 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi @@ -168,15 +168,15 @@ reg = <0x32 0x20>; }; - eth_mac: eth_mac@0 { + eth_mac: eth-mac@0 { reg = <0x0 0x6>; }; - bt_mac: bt_mac@6 { + bt_mac: bt-mac@6 { reg = <0x6 0x6>; }; - wifi_mac: wifi_mac@c { + wifi_mac: wifi-mac@c { reg = <0xc 0x6>; }; @@ -217,7 +217,7 @@ pinctrl-names = "default"; /* RTC */ - pcf8563: pcf8563@51 { + pcf8563: rtc@51 { compatible = "nxp,pcf8563"; reg = <0x51>; status = "okay"; @@ -303,7 +303,7 @@ &usb { status = "okay"; - phy-supply = <&usb_pwr>; + vbus-supply = <&usb_pwr>; }; &spicc1 { diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi index 1648e67afbb6..b984950591e2 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi @@ -153,7 +153,7 @@ scpi_clocks: clocks { compatible = "arm,scpi-clocks"; - scpi_dvfs: clock-controller { + scpi_dvfs: clocks-0 { compatible = "arm,scpi-dvfs-clocks"; #clock-cells = <1>; clock-indices = <0>; @@ -162,7 +162,7 @@ }; scpi_sensors: sensors { - compatible = "amlogic,meson-gxbb-scpi-sensors"; + compatible = "amlogic,meson-gxbb-scpi-sensors", "arm,scpi-sensors"; #thermal-sensor-cells = <1>; }; }; @@ -1883,10 +1883,10 @@ #size-cells = <2>; ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x200000>; - sd_emmc_b: sd@5000 { + sd_emmc_b: mmc@5000 { compatible = "amlogic,meson-axg-mmc"; reg = <0x0 0x5000 0x0 0x800>; - interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; clocks = <&clkc CLKID_SD_EMMC_B>, <&clkc CLKID_SD_EMMC_B_CLK0>, @@ -1898,7 +1898,7 @@ sd_emmc_c: mmc@7000 { compatible = "amlogic,meson-axg-mmc"; reg = <0x0 0x7000 0x0 0x800>; - interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; clocks = <&clkc CLKID_SD_EMMC_C>, <&clkc CLKID_SD_EMMC_C_CLK0>, diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi index 9dbd50820b1c..123a56f7f818 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi @@ -1694,7 +1694,7 @@ #address-cells = <1>; #size-cells = <0>; - internal_ephy: ethernet_phy@8 { + internal_ephy: ethernet-phy@8 { compatible = "ethernet-phy-id0180.3301", "ethernet-phy-ieee802.3-c22"; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; @@ -2321,10 +2321,10 @@ }; }; - sd_emmc_a: sd@ffe03000 { + sd_emmc_a: mmc@ffe03000 { compatible = "amlogic,meson-axg-mmc"; reg = <0x0 0xffe03000 0x0 0x800>; - interrupts = <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; clocks = <&clkc CLKID_SD_EMMC_A>, <&clkc CLKID_SD_EMMC_A_CLK0>, @@ -2333,10 +2333,10 @@ resets = <&reset RESET_SD_EMMC_A>; }; - sd_emmc_b: sd@ffe05000 { + sd_emmc_b: mmc@ffe05000 { compatible = "amlogic,meson-axg-mmc"; reg = <0x0 0xffe05000 0x0 0x800>; - interrupts = <GIC_SPI 190 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; clocks = <&clkc CLKID_SD_EMMC_B>, <&clkc CLKID_SD_EMMC_B_CLK0>, @@ -2348,7 +2348,7 @@ sd_emmc_c: mmc@ffe07000 { compatible = "amlogic,meson-axg-mmc"; reg = <0x0 0xffe07000 0x0 0x800>; - interrupts = <GIC_SPI 191 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; clocks = <&clkc CLKID_SD_EMMC_C>, <&clkc CLKID_SD_EMMC_C_CLK0>, @@ -2490,4 +2490,14 @@ #clock-cells = <0>; }; + npu: npu@ff100000 { + compatible = "vivante,gc"; + reg = <0x0 0xff100000 0x0 0x20000>; + interrupts = <0 147 4>; + clocks = <&clkc CLKID_NNA_CORE_CLK>, + <&clkc CLKID_NNA_AXI_CLK>; + clock-names = "core", "bus"; + resets = <&reset RESET_NNA>; + status = "disabled"; + }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts index e3bb6df42ff3..cf0a9be83fc4 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts @@ -401,5 +401,4 @@ &usb { status = "okay"; - dr_mode = "host"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi index 7677764eeee6..f58fd2a6fe61 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi @@ -58,26 +58,6 @@ compatible = "operating-points-v2"; opp-shared; - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - opp-microvolt = <731000>; - }; - - opp-250000000 { - opp-hz = /bits/ 64 <250000000>; - opp-microvolt = <731000>; - }; - - opp-500000000 { - opp-hz = /bits/ 64 <500000000>; - opp-microvolt = <731000>; - }; - - opp-667000000 { - opp-hz = /bits/ 64 <666666666>; - opp-microvolt = <731000>; - }; - opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <731000>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts index 1e40709610c5..c8e5a0a42b89 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts @@ -381,6 +381,7 @@ reg = <0x1c>; interrupt-parent = <&gpio_intc>; interrupts = <7 IRQ_TYPE_LEVEL_LOW>; /* GPIOAO_7 */ + #clock-cells = <1>; vcc1-supply = <&vdd_sys>; vcc2-supply = <&vdd_sys>; @@ -391,7 +392,6 @@ vcc8-supply = <&vcc_2v3>; vcc9-supply = <&vddao_3v3>; boost-supply = <&vdd_sys>; - switch-supply = <&vdd_sys>; regulators { vddcpu_a: DCDC_REG1 { diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi index 667d2b774924..24d0442dffb2 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi @@ -4,17 +4,11 @@ * Author: Neil Armstrong <narmstrong@baylibre.com> */ -#include <dt-bindings/input/input.h> -#include <dt-bindings/gpio/meson-g12a-gpio.h> -#include <dt-bindings/sound/meson-g12a-toacodec.h> -#include <dt-bindings/sound/meson-g12a-tohdmitx.h> +#include "meson-g12b-odroid.dtsi" / { aliases { - serial0 = &uart_AO; - ethernet0 = ðmac; rtc0 = &rtc; - rtc1 = &vrtc; }; dio2133: audio-amplifier-0 { @@ -25,149 +19,6 @@ status = "okay"; }; - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x40000000>; - }; - - emmc_pwrseq: emmc-pwrseq { - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; - }; - - fan: gpio-fan { - compatible = "gpio-fan"; - gpios = <&gpio_ao GPIOAO_10 GPIO_ACTIVE_HIGH>; - /* Using Dummy Speed */ - gpio-fan,speed-map = <0 0>, <1 1>; - #cooling-cells = <2>; - }; - - leds { - compatible = "gpio-leds"; - - led-blue { - label = "n2:blue"; - gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; - }; - - tflash_vdd: regulator-tflash_vdd { - compatible = "regulator-fixed"; - - regulator-name = "TFLASH_VDD"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&gpio_ao GPIOAO_8 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-always-on; - }; - - tf_io: gpio-regulator-tf_io { - compatible = "regulator-gpio"; - - regulator-name = "TF_IO"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - - gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>; - gpios-states = <0>; - - states = <3300000 0>, - <1800000 1>; - }; - - flash_1v8: regulator-flash_1v8 { - compatible = "regulator-fixed"; - regulator-name = "FLASH_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_3v3>; - regulator-always-on; - }; - - main_12v: regulator-main_12v { - compatible = "regulator-fixed"; - regulator-name = "12V"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - regulator-always-on; - }; - - vcc_5v: regulator-vcc_5v { - compatible = "regulator-fixed"; - regulator-name = "5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - vin-supply = <&main_12v>; - gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; - enable-active-high; - }; - - vcc_1v8: regulator-vcc_1v8 { - compatible = "regulator-fixed"; - regulator-name = "VCC_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_3v3>; - regulator-always-on; - }; - - vcc_3v3: regulator-vcc_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VCC_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - /* FIXME: actually controlled by VDDCPU_B_EN */ - }; - - vddcpu_a: regulator-vddcpu-a { - /* - * MP8756GD Regulator. - */ - compatible = "pwm-regulator"; - - regulator-name = "VDDCPU_A"; - regulator-min-microvolt = <721000>; - regulator-max-microvolt = <1022000>; - - pwm-supply = <&main_12v>; - - pwms = <&pwm_ab 0 1250 0>; - pwm-dutycycle-range = <100 0>; - - regulator-boot-on; - regulator-always-on; - }; - - vddcpu_b: regulator-vddcpu-b { - /* - * Silergy SY8120B1ABC Regulator. - */ - compatible = "pwm-regulator"; - - regulator-name = "VDDCPU_B"; - regulator-min-microvolt = <721000>; - regulator-max-microvolt = <1022000>; - - pwm-supply = <&main_12v>; - - pwms = <&pwm_AO_cd 1 1250 0>; - pwm-dutycycle-range = <100 0>; - - regulator-boot-on; - regulator-always-on; - }; - hub_5v: regulator-hub_5v { compatible = "regulator-fixed"; regulator-name = "HUB_5V"; @@ -180,47 +31,6 @@ enable-active-high; }; - usb_pwr_en: regulator-usb_pwr_en { - compatible = "regulator-fixed"; - regulator-name = "USB_PWR_EN"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc_5v>; - - /* Connected to the microUSB port power enable */ - gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - vddao_1v8: regulator-vddao_1v8 { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - }; - - vddao_3v3: regulator-vddao_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&main_12v>; - regulator-always-on; - }; - - hdmi-connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&hdmi_tx_tmds_out>; - }; - }; - }; - sound { compatible = "amlogic,axg-sound-card"; model = "ODROID-N2"; @@ -354,102 +164,13 @@ status = "okay"; }; -&arb { - status = "okay"; -}; - -&cec_AO { - pinctrl-0 = <&cec_ao_a_h_pins>; - pinctrl-names = "default"; - status = "disabled"; - hdmi-phandle = <&hdmi_tx>; -}; - -&cecb_AO { - pinctrl-0 = <&cec_ao_b_h_pins>; +ðmac { + pinctrl-0 = <ð_pins>, <ð_rgmii_pins>; pinctrl-names = "default"; status = "okay"; - hdmi-phandle = <&hdmi_tx>; -}; - -&clkc_audio { - status = "okay"; -}; - -&cpu0 { - cpu-supply = <&vddcpu_b>; - operating-points-v2 = <&cpu_opp_table_0>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cpu1 { - cpu-supply = <&vddcpu_b>; - operating-points-v2 = <&cpu_opp_table_0>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cpu100 { - cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; - clock-latency = <50000>; -}; - -&cpu101 { - cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; - clock-latency = <50000>; -}; - -&cpu102 { - cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; - clock-latency = <50000>; -}; - -&cpu103 { - cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; - clock-latency = <50000>; -}; - -&cpu_thermal { - trips { - cpu_active: cpu-active { - temperature = <60000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "active"; - }; - }; - - cooling-maps { - map { - trip = <&cpu_active>; - cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; -}; - -&ddr_thermal { - trips { - ddr_active: ddr-active { - temperature = <60000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "active"; - }; - }; - - cooling-maps { - map { - trip = <&ddr_active>; - cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; + phy-mode = "rgmii"; + phy-handle = <&external_phy>; + amlogic,tx-delay-ns = <2>; }; &ext_mdio { @@ -468,27 +189,6 @@ }; }; -ðmac { - pinctrl-0 = <ð_pins>, <ð_rgmii_pins>; - pinctrl-names = "default"; - status = "okay"; - phy-mode = "rgmii"; - phy-handle = <&external_phy>; - amlogic,tx-delay-ns = <2>; -}; - -&frddr_a { - status = "okay"; -}; - -&frddr_b { - status = "okay"; -}; - -&frddr_c { - status = "okay"; -}; - &gpio { gpio-line-names = /* GPIOZ */ @@ -549,26 +249,6 @@ }; }; -&hdmi_tx { - status = "okay"; - pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; - pinctrl-names = "default"; - hdmi-supply = <&vcc_5v>; -}; - -&hdmi_tx_tmds_port { - hdmi_tx_tmds_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; -}; - -&ir { - status = "okay"; - pinctrl-0 = <&remote_input_ao_pins>; - pinctrl-names = "default"; - linux,rc-map-name = "rc-odroid"; -}; - &i2c3 { status = "okay"; pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>; @@ -581,62 +261,11 @@ }; }; -&pwm_ab { - pinctrl-0 = <&pwm_a_e_pins>; - pinctrl-names = "default"; - clocks = <&xtal>; - clock-names = "clkin0"; +&ir { status = "okay"; -}; - -&pwm_AO_cd { - pinctrl-0 = <&pwm_ao_d_e_pins>; + pinctrl-0 = <&remote_input_ao_pins>; pinctrl-names = "default"; - clocks = <&xtal>; - clock-names = "clkin1"; - status = "okay"; -}; - -&saradc { - status = "okay"; - vref-supply = <&vddao_1v8>; -}; - -/* SD card */ -&sd_emmc_b { - status = "okay"; - pinctrl-0 = <&sdcard_c_pins>; - pinctrl-1 = <&sdcard_clk_gate_c_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <4>; - cap-sd-highspeed; - max-frequency = <50000000>; - disable-wp; - - cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; - vmmc-supply = <&tflash_vdd>; - vqmmc-supply = <&tf_io>; - -}; - -/* eMMC */ -&sd_emmc_c { - status = "okay"; - pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; - pinctrl-1 = <&emmc_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <8>; - cap-mmc-highspeed; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - max-frequency = <200000000>; - disable-wp; - - mmc-pwrseq = <&emmc_pwrseq>; - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&flash_1v8>; + linux,rc-map-name = "rc-odroid"; }; /* @@ -660,73 +289,14 @@ }; }; -&tdmif_b { - status = "okay"; -}; - -&tdmif_c { - status = "okay"; -}; - -&tdmin_a { - status = "okay"; -}; - -&tdmin_b { - status = "okay"; -}; - -&tdmin_c { - status = "okay"; -}; - -&tdmin_lb { - status = "okay"; -}; - -&tdmout_b { - status = "okay"; -}; - -&tdmout_c { - status = "okay"; -}; - &toacodec { status = "okay"; }; -&tohdmitx { - status = "okay"; -}; - -&toddr_a { - status = "okay"; -}; - -&toddr_b { - status = "okay"; -}; - -&toddr_c { - status = "okay"; -}; - -&uart_AO { - status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; - pinctrl-names = "default"; -}; - &usb { - status = "okay"; vbus-supply = <&usb_pwr_en>; }; -&usb2_phy0 { - phy-supply = <&vcc_5v>; -}; - &usb2_phy1 { /* Enable the hub which is connected to this port */ phy-supply = <&hub_5v>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2l.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2l.dts new file mode 100644 index 000000000000..70919f40d597 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2l.dts @@ -0,0 +1,125 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2022 Dongjin Kim <tobetter@gmail.com> + */ + +/dts-v1/; + +/* The Amlogic S922X Rev. C supports the same OPPs as the A311D variant */ +#include "meson-g12b-a311d.dtsi" +#include "meson-g12b-odroid.dtsi" + +/ { + compatible = "hardkernel,odroid-n2l", "amlogic,s922x", "amlogic,g12b"; + model = "Hardkernel ODROID-N2L"; + + sound { + compatible = "amlogic,axg-sound-card"; + model = "ODROID-N2L"; + audio-aux-devs = <&tdmout_b>, <&tdmin_a>, <&tdmin_b>, + <&tdmin_c>, <&tdmin_lb>; + audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", + "TDMOUT_B IN 1", "FRDDR_B OUT 1", + "TDMOUT_B IN 2", "FRDDR_C OUT 1", + "TDM_B Playback", "TDMOUT_B OUT", + "TDMIN_A IN 4", "TDM_B Loopback", + "TDMIN_B IN 4", "TDM_B Loopback", + "TDMIN_C IN 4", "TDM_B Loopback", + "TDMIN_LB IN 1", "TDM_B Loopback", + "TODDR_A IN 0", "TDMIN_A OUT", + "TODDR_B IN 0", "TDMIN_A OUT", + "TODDR_C IN 0", "TDMIN_A OUT", + "TODDR_A IN 1", "TDMIN_B OUT", + "TODDR_B IN 1", "TDMIN_B OUT", + "TODDR_C IN 1", "TDMIN_B OUT", + "TODDR_A IN 2", "TDMIN_C OUT", + "TODDR_B IN 2", "TDMIN_C OUT", + "TODDR_C IN 2", "TDMIN_C OUT", + "TODDR_A IN 6", "TDMIN_LB OUT", + "TODDR_B IN 6", "TDMIN_LB OUT", + "TODDR_C IN 6", "TDMIN_LB OUT"; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + dai-link-3 { + sound-dai = <&toddr_a>; + }; + + dai-link-4 { + sound-dai = <&toddr_b>; + }; + + dai-link-5 { + sound-dai = <&toddr_c>; + }; + + /* 8ch hdmi interface */ + dai-link-6 { + sound-dai = <&tdmif_b>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; + }; + }; + + /* hdmi glue */ + dai-link-7 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +ð_phy { + status = "disabled"; +}; + +&vddcpu_a { + regulator-min-microvolt = <680000>; + regulator-max-microvolt = <1040000>; + + pwms = <&pwm_ab 0 1500 0>; +}; + +&vddcpu_b { + regulator-min-microvolt = <680000>; + regulator-max-microvolt = <1040000>; + + pwms = <&pwm_AO_cd 1 1500 0>; +}; + +&usb2_phy0 { + phy-supply = <&usb_pwr_en>; +}; + +&usb2_phy1 { + phy-supply = <&usb_pwr_en>; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid.dtsi new file mode 100644 index 000000000000..9e12a34b2840 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid.dtsi @@ -0,0 +1,445 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + */ + +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/meson-g12a-gpio.h> +#include <dt-bindings/sound/meson-g12a-toacodec.h> +#include <dt-bindings/sound/meson-g12a-tohdmitx.h> + +/ { + aliases { + serial0 = &uart_AO; + ethernet0 = ðmac; + rtc1 = &vrtc; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; + }; + + fan: gpio-fan { + compatible = "gpio-fan"; + gpios = <&gpio_ao GPIOAO_10 GPIO_ACTIVE_HIGH>; + /* Using Dummy Speed */ + gpio-fan,speed-map = <0 0>, <1 1>; + #cooling-cells = <2>; + }; + + leds { + compatible = "gpio-leds"; + + led-blue { + label = "n2:blue"; + gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + tflash_vdd: regulator-tflash_vdd { + compatible = "regulator-fixed"; + + regulator-name = "TFLASH_VDD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio_ao GPIOAO_8 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + tf_io: gpio-regulator-tf_io { + compatible = "regulator-gpio"; + + regulator-name = "TF_IO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>; + gpios-states = <0>; + + states = <3300000 0>, + <1800000 1>; + }; + + flash_1v8: regulator-flash_1v8 { + compatible = "regulator-fixed"; + regulator-name = "FLASH_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-always-on; + }; + + main_12v: regulator-main_12v { + compatible = "regulator-fixed"; + regulator-name = "12V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + }; + + usb_pwr_en: regulator-usb_pwr_en { + compatible = "regulator-fixed"; + regulator-name = "USB_PWR_EN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_5v>; + + /* Connected to the microUSB port power enable */ + gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vcc_5v: regulator-vcc_5v { + compatible = "regulator-fixed"; + regulator-name = "5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + vin-supply = <&main_12v>; + gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; + enable-active-high; + }; + + vcc_1v8: regulator-vcc_1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-always-on; + }; + + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + /* FIXME: actually controlled by VDDCPU_B_EN */ + }; + + vddcpu_a: regulator-vddcpu-a { + /* + * MP8756GD Regulator. + */ + compatible = "pwm-regulator"; + + regulator-name = "VDDCPU_A"; + regulator-min-microvolt = <721000>; + regulator-max-microvolt = <1022000>; + + pwm-supply = <&main_12v>; + + pwms = <&pwm_ab 0 1250 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; + + vddcpu_b: regulator-vddcpu-b { + /* + * Silergy SY8120B1ABC Regulator. + */ + compatible = "pwm-regulator"; + + regulator-name = "VDDCPU_B"; + regulator-min-microvolt = <721000>; + regulator-max-microvolt = <1022000>; + + pwm-supply = <&main_12v>; + + pwms = <&pwm_AO_cd 1 1250 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; + + vddao_1v8: regulator-vddao_1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + vddao_3v3: regulator-vddao_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&main_12v>; + regulator-always-on; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; +}; + +&arb { + status = "okay"; +}; + +&cec_AO { + pinctrl-0 = <&cec_ao_a_h_pins>; + pinctrl-names = "default"; + status = "disabled"; + hdmi-phandle = <&hdmi_tx>; +}; + +&cecb_AO { + pinctrl-0 = <&cec_ao_b_h_pins>; + pinctrl-names = "default"; + status = "okay"; + hdmi-phandle = <&hdmi_tx>; +}; + +&clkc_audio { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vddcpu_b>; + operating-points-v2 = <&cpu_opp_table_0>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu1 { + cpu-supply = <&vddcpu_b>; + operating-points-v2 = <&cpu_opp_table_0>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu100 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu101 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu102 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu103 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu_thermal { + trips { + cpu_active: cpu-active { + temperature = <60000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "active"; + }; + }; + + cooling-maps { + map { + trip = <&cpu_active>; + cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; +}; + +&ddr_thermal { + trips { + ddr_active: ddr-active { + temperature = <60000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "active"; + }; + }; + + cooling-maps { + map { + trip = <&ddr_active>; + cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; +}; + +&frddr_a { + status = "okay"; +}; + +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; +}; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; + pinctrl-names = "default"; + hdmi-supply = <&vcc_5v>; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + +&pwm_ab { + pinctrl-0 = <&pwm_a_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin0"; + status = "okay"; +}; + +&pwm_AO_cd { + pinctrl-0 = <&pwm_ao_d_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin1"; + status = "okay"; +}; + +&saradc { + status = "okay"; + vref-supply = <&vddao_1v8>; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_c_pins>; + pinctrl-1 = <&sdcard_clk_gate_c_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <50000000>; + disable-wp; + + cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&tflash_vdd>; + vqmmc-supply = <&tf_io>; + +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + max-frequency = <200000000>; + disable-wp; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&flash_1v8>; +}; + +&tdmif_b { + status = "okay"; +}; + +&tdmif_c { + status = "okay"; +}; + +&tdmin_a { + status = "okay"; +}; + +&tdmin_b { + status = "okay"; +}; + +&tdmin_c { + status = "okay"; +}; + +&tdmin_lb { + status = "okay"; +}; + +&tdmout_b { + status = "okay"; +}; + +&tdmout_c { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +}; + +&toddr_a { + status = "okay"; +}; + +&toddr_b { + status = "okay"; +}; + +&toddr_c { + status = "okay"; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +&usb { + status = "okay"; +}; + +&usb2_phy0 { + phy-supply = <&vcc_5v>; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts new file mode 100644 index 000000000000..9a60c5ec2072 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts @@ -0,0 +1,489 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com> + * Copyright (c) 2022 Radxa Limited + * Author: Yuntian Zhang <yt@radxa.com> + */ + +/dts-v1/; + +#include "meson-g12b-a311d.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/gpio/meson-g12a-gpio.h> +#include <dt-bindings/sound/meson-g12a-tohdmitx.h> + +/ { + compatible = "radxa,zero2", "amlogic,a311d", "amlogic,g12b"; + model = "Radxa Zero2"; + + aliases { + serial0 = &uart_AO; + serial2 = &uart_A; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + power-button { + label = "power"; + linux,code = <KEY_POWER>; + gpios = <&gpio_ao GPIOAO_3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-green { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_STATUS; + gpios = <&gpio GPIOA_12 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; + + ao_5v: regulator-ao-5v { + compatible = "regulator-fixed"; + regulator-name = "AO_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + vcc_1v8: regulator-vcc-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-always-on; + }; + + vcc_3v3: regulator-vcc-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + /* FIXME: actually controlled by VDDCPU_B_EN */ + }; + + vddao_1v8: regulator-vddao-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + vddao_3v3: regulator-vddao-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&ao_5v>; + regulator-always-on; + }; + + vddcpu_a: regulator-vddcpu-a { + /* + * MP8756GD Regulator. + */ + compatible = "pwm-regulator"; + + regulator-name = "VDDCPU_A"; + regulator-min-microvolt = <730000>; + regulator-max-microvolt = <1022000>; + + pwm-supply = <&ao_5v>; + + pwms = <&pwm_ab 0 1250 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; + + vddcpu_b: regulator-vddcpu-b { + /* + * Silergy SY8120B1ABC Regulator. + */ + compatible = "pwm-regulator"; + + regulator-name = "VDDCPU_B"; + regulator-min-microvolt = <730000>; + regulator-max-microvolt = <1022000>; + + pwm-supply = <&ao_5v>; + + pwms = <&pwm_AO_cd 1 1250 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; + + sound { + compatible = "amlogic,axg-sound-card"; + model = "RADXA-ZERO2"; + audio-aux-devs = <&tdmout_b>; + audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", + "TDMOUT_B IN 1", "FRDDR_B OUT 1", + "TDMOUT_B IN 2", "FRDDR_C OUT 1", + "TDM_B Playback", "TDMOUT_B OUT"; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + /* 8ch hdmi interface */ + dai-link-3 { + sound-dai = <&tdmif_b>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; + }; + }; + + /* hdmi glue */ + dai-link-4 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + }; + + wifi32k: clock-0 { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ + }; +}; + +&arb { + status = "okay"; +}; + +&cec_AO { + pinctrl-0 = <&cec_ao_a_h_pins>; + pinctrl-names = "default"; + status = "disabled"; + hdmi-phandle = <&hdmi_tx>; +}; + +&cecb_AO { + pinctrl-0 = <&cec_ao_b_h_pins>; + pinctrl-names = "default"; + status = "okay"; + hdmi-phandle = <&hdmi_tx>; +}; + +&clkc_audio { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vddcpu_b>; + operating-points-v2 = <&cpu_opp_table_0>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu1 { + cpu-supply = <&vddcpu_b>; + operating-points-v2 = <&cpu_opp_table_0>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu100 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu101 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu102 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu103 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&frddr_a { + status = "okay"; +}; + +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; +}; + +&gpio { + gpio-line-names = + /* GPIOZ */ + "PIN_27", "PIN_28", "PIN_7", "PIN_11", "PIN_13", "PIN_15", "PIN_18", "PIN_40", + "", "", "", "", "", "", "", "", + /* GPIOH */ + "", "", "", "", "PIN_19", "PIN_21", "PIN_24", "PIN_23", + "", + /* BOOT */ + "", "", "", "", "", "", "", "", + "", "", "", "", "EMMC_PWRSEQ", "", "", "", + /* GPIOC */ + "", "", "", "", "", "", "SD_CD", "PIN_36", + /* GPIOA */ + "PIN_32", "PIN_12", "PIN_35", "", "", "PIN_38", "", "", + "", "", "", "", "LED_GREEN", "PIN_31", "PIN_3", "PIN_5", + /* GPIOX */ + "", "", "", "", "", "", "SDIO_PWRSEQ", "", + "", "", "", "", "", "", "", "", + "", "BT_SHUTDOWN", "", ""; +}; + +&gpio_ao { + gpio-line-names = + /* GPIOAO */ + "PIN_8", "PIN_10", "", "BTN_POWER", "", "", "", "PIN_29", + "PIN_33", "PIN_37", "FAN", "", + /* GPIOE */ + "", "", ""; +}; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; + pinctrl-names = "default"; + hdmi-supply = <&ao_5v>; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + +&ir { + status = "disabled"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + +&pwm_ab { + pinctrl-0 = <&pwm_a_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin0"; + status = "okay"; +}; + +&pwm_ef { + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin2"; + status = "okay"; +}; + +&pwm_AO_ab { + pinctrl-0 = <&pwm_ao_a_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin3"; + status = "okay"; +}; + +&pwm_AO_cd { + pinctrl-0 = <&pwm_ao_d_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin4"; + status = "okay"; +}; + +&saradc { + status = "okay"; + vref-supply = <&vddao_1v8>; +}; + +/* SDIO */ +&sd_emmc_a { + status = "okay"; + pinctrl-0 = <&sdio_pins>; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + #address-cells = <1>; + #size-cells = <0>; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <100000000>; + + non-removable; + disable-wp; + + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddao_1v8>; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_c_pins>; + pinctrl-1 = <&sdcard_clk_gate_c_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <50000000>; + disable-wp; + + cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddao_3v3>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + max-frequency = <200000000>; + disable-wp; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcc_1v8>; +}; + +&tdmif_b { + status = "okay"; +}; + +&tdmout_b { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +}; + +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + max-speed = <2000000>; + clocks = <&wifi32k>; + clock-names = "lpo"; + }; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +&usb { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi index 75ff00fb2e4c..431572b384db 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi @@ -144,3 +144,7 @@ &pmu { compatible = "amlogic,g12b-ddr-pmu"; }; + +&npu { + power-domains = <&pwrc PWRC_G12A_NNA_ID>; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi index bcdf55f48a83..4e84ab87cc7d 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi @@ -17,7 +17,7 @@ io-channel-names = "buttons"; keyup-threshold-microvolt = <1800000>; - update-button { + button-update { label = "update"; linux,code = <KEY_VENDOR>; press-threshold-microvolt = <1300000>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi index e3c12e0be99d..11f89bfecb56 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi @@ -233,7 +233,7 @@ reg = <0x14 0x10>; }; - eth_mac: eth_mac@34 { + eth_mac: eth-mac@34 { reg = <0x34 0x10>; }; @@ -250,7 +250,7 @@ scpi_clocks: clocks { compatible = "arm,scpi-clocks"; - scpi_dvfs: scpi_clocks@0 { + scpi_dvfs: clocks-0 { compatible = "arm,scpi-dvfs-clocks"; #clock-cells = <1>; clock-indices = <0>; @@ -532,7 +532,7 @@ #size-cells = <2>; ranges = <0x0 0x0 0x0 0xc8834000 0x0 0x2000>; - hwrng: rng { + hwrng: rng@0 { compatible = "amlogic,meson-rng"; reg = <0x0 0x0 0x0 0x4>; }; @@ -603,21 +603,21 @@ sd_emmc_a: mmc@70000 { compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc"; reg = <0x0 0x70000 0x0 0x800>; - interrupts = <GIC_SPI 216 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; sd_emmc_b: mmc@72000 { compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc"; reg = <0x0 0x72000 0x0 0x800>; - interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; sd_emmc_c: mmc@74000 { compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc"; reg = <0x0 0x74000 0x0 0x800>; - interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts index 6d8cc00fedc7..5f2d4317ecfb 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts @@ -16,7 +16,7 @@ leds { compatible = "gpio-leds"; - status { + led { gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>; default-state = "off"; color = <LED_COLOR_ID_RED>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts index 9ef210f17b4a..393d3cb33b9e 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts @@ -18,7 +18,7 @@ leds { compatible = "gpio-leds"; - status { + led { label = "n1:white:status"; gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>; default-state = "on"; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts index b331a013572f..c490dbbf063b 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts @@ -79,6 +79,5 @@ enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; max-speed = <2000000>; clocks = <&wifi32k>; - clock-names = "lpo"; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts index 6831137c5c10..a18d6d241a5a 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts @@ -86,11 +86,11 @@ }; &efuse { - bt_mac: bt_mac@6 { + bt_mac: bt-mac@6 { reg = <0x6 0x6>; }; - wifi_mac: wifi_mac@C { + wifi_mac: wifi-mac@c { reg = <0xc 0x6>; }; }; @@ -239,7 +239,7 @@ pinctrl-names = "default"; pinctrl-0 = <&i2c_b_pins>; - pcf8563: pcf8563@51 { + pcf8563: rtc@51 { compatible = "nxp,pcf8563"; reg = <0x51>; status = "okay"; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts index 202deb4e2d63..02f81839d4e3 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts @@ -218,21 +218,6 @@ &sd_emmc_a { max-frequency = <100000000>; - - brcmf: wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - }; -}; - -&uart_A { - bluetooth { - compatible = "brcm,bcm43438-bt"; - shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; - max-speed = <2000000>; - clocks = <&wifi32k>; - clock-names = "lpo"; - }; }; /* This is brought out on the Linux_RX (18) and Linux_TX (19) pins: */ diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts index 2602940c2077..9b4ea6a49398 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts @@ -7,11 +7,19 @@ /dts-v1/; #include "meson-gxl-s905x-p212.dtsi" +#include <dt-bindings/sound/meson-aiu.h> / { compatible = "amlogic,p212", "amlogic,s905x", "amlogic,meson-gxl"; model = "Amlogic Meson GXL (S905X) P212 Development Board"; + dio2133: analog-amplifier { + compatible = "simple-audio-amplifier"; + sound-name-prefix = "AU2"; + VCC-supply = <&hdmi_5v>; + enable-gpios = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>; + }; + cvbs-connector { compatible = "composite-video-connector"; @@ -32,6 +40,66 @@ }; }; }; + + sound { + compatible = "amlogic,gx-sound-card"; + model = "S905X-P212"; + audio-aux-devs = <&dio2133>; + audio-widgets = "Line", "Lineout"; + audio-routing = "AU2 INL", "ACODEC LOLN", + "AU2 INR", "ACODEC LORN", + "Lineout", "AU2 OUTL", + "Lineout", "AU2 OUTR"; + assigned-clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + dai-link-0 { + sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; + }; + + dai-link-1 { + sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>; + dai-format = "i2s"; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&aiu AIU_HDMI CTRL_I2S>; + }; + + codec-1 { + sound-dai = <&aiu AIU_ACODEC CTRL_I2S>; + }; + }; + + dai-link-2 { + sound-dai = <&aiu AIU_HDMI CTRL_OUT>; + + codec-0 { + sound-dai = <&hdmi_tx>; + }; + }; + + dai-link-3 { + sound-dai = <&aiu AIU_ACODEC CTRL_OUT>; + + codec-0 { + sound-dai = <&acodec>; + }; + }; + }; +}; + +&acodec { + AVDD-supply = <&vddio_ao18>; + status = "okay"; +}; + +&aiu { + status = "okay"; }; &cec_AO { diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi index 05cb2f5e5c36..a150cc0e18ff 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi @@ -97,6 +97,14 @@ pinctrl-names = "default"; }; +&pwm_ef { + status = "okay"; + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; + clocks = <&clkc CLKID_FCLK_DIV4>; + clock-names = "clkin0"; +}; + &saradc { status = "okay"; vref-supply = <&vddio_ao18>; @@ -125,6 +133,11 @@ vmmc-supply = <&vddao_3v3>; vqmmc-supply = <&vddio_boot>; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; }; /* SD card */ @@ -165,14 +178,6 @@ vqmmc-supply = <&vddio_boot>; }; -&pwm_ef { - status = "okay"; - pinctrl-0 = <&pwm_e_pins>; - pinctrl-names = "default"; - clocks = <&clkc CLKID_FCLK_DIV4>; - clock-names = "clkin0"; -}; - /* This is connected to the Bluetooth module: */ &uart_A { status = "okay"; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi index 04e9d0f1bde0..5905a6df09b0 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi @@ -773,7 +773,7 @@ }; }; - eth-phy-mux { + eth-phy-mux@55c { compatible = "mdio-mux-mmioreg", "mdio-mux"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts index b21172ece1fa..74897a154891 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts @@ -52,10 +52,11 @@ gpios = <&gpio GPIODV_14 GPIO_ACTIVE_HIGH &gpio GPIODV_15 GPIO_ACTIVE_HIGH>; /* Dummy RPM values since fan is optional */ - gpio-fan,speed-map = <0 0 - 1 1 - 2 2 - 3 3>; + gpio-fan,speed-map = + <0 0>, + <1 1>, + <2 2>, + <3 3>; #cooling-cells = <2>; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m2-pro.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m2-pro.dts new file mode 100644 index 000000000000..586034316ec3 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m2-pro.dts @@ -0,0 +1,97 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2021 BayLibre SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + */ + +/dts-v1/; + +#include "meson-sm1-bananapi.dtsi" +#include <dt-bindings/sound/meson-g12a-tohdmitx.h> + +/ { + compatible = "bananapi,bpi-m2-pro", "amlogic,sm1"; + model = "Banana Pi BPI-M2-PRO"; + + sound { + compatible = "amlogic,axg-sound-card"; + model = "BPI-M2-PRO"; + audio-aux-devs = <&tdmout_b>; + audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", + "TDMOUT_B IN 1", "FRDDR_B OUT 1", + "TDMOUT_B IN 2", "FRDDR_C OUT 1", + "TDM_B Playback", "TDMOUT_B OUT"; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + /* 8ch hdmi interface */ + dai-link-3 { + sound-dai = <&tdmif_b>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; + }; + }; + + /* hdmi glue */ + dai-link-4 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&clkc_audio { + status = "okay"; +}; + +&frddr_a { + status = "okay"; +}; + +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; +}; + +&tdmif_b { + status = "okay"; +}; + +&tdmout_b { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts index cadba194b149..f045bf851638 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts @@ -6,10 +6,7 @@ /dts-v1/; -#include "meson-sm1.dtsi" -#include <dt-bindings/leds/common.h> -#include <dt-bindings/input/linux-event-codes.h> -#include <dt-bindings/gpio/meson-g12a-gpio.h> +#include "meson-sm1-bananapi.dtsi" #include <dt-bindings/sound/meson-g12a-toacodec.h> #include <dt-bindings/sound/meson-g12a-tohdmitx.h> @@ -17,28 +14,6 @@ compatible = "bananapi,bpi-m5", "amlogic,sm1"; model = "Banana Pi BPI-M5"; - adc_keys { - compatible = "adc-keys"; - io-channels = <&saradc 2>; - io-channel-names = "buttons"; - keyup-threshold-microvolt = <1800000>; - - key { - label = "SW3"; - linux,code = <BTN_3>; - press-threshold-microvolt = <1700000>; - }; - }; - - aliases { - serial0 = &uart_AO; - ethernet0 = ðmac; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - /* TOFIX: handle CVBS_DET on SARADC channel 0 */ cvbs-connector { compatible = "composite-video-connector"; @@ -50,150 +25,6 @@ }; }; - emmc_pwrseq: emmc-pwrseq { - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; - }; - - gpio-keys { - compatible = "gpio-keys"; - - key { - label = "SW1"; - linux,code = <BTN_1>; - gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>; - interrupt-parent = <&gpio_intc>; - interrupts = <3 IRQ_TYPE_EDGE_BOTH>; - }; - }; - - hdmi-connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&hdmi_tx_tmds_out>; - }; - }; - }; - - leds { - compatible = "gpio-leds"; - - green { - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_STATUS; - gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; - }; - - blue { - color = <LED_COLOR_ID_BLUE>; - function = LED_FUNCTION_STATUS; - gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_LOW>; - linux,default-trigger = "heartbeat"; - }; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x40000000>; - }; - - emmc_1v8: regulator-emmc_1v8 { - compatible = "regulator-fixed"; - regulator-name = "EMMC_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - }; - - dc_in: regulator-dc_in { - compatible = "regulator-fixed"; - regulator-name = "DC_IN"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; - - vddio_c: regulator-vddio_c { - compatible = "regulator-gpio"; - regulator-name = "VDDIO_C"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - - enable-gpio = <&gpio_ao GPIOE_2 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-always-on; - - gpios = <&gpio_ao GPIOAO_6 GPIO_OPEN_DRAIN>; - gpios-states = <1>; - - states = <1800000 0>, - <3300000 1>; - }; - - tflash_vdd: regulator-tflash_vdd { - compatible = "regulator-fixed"; - regulator-name = "TFLASH_VDD"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&dc_in>; - gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; - enable-active-high; - regulator-always-on; - }; - - vddao_1v8: regulator-vddao_1v8 { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - }; - - vddao_3v3: regulator-vddao_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&dc_in>; - regulator-always-on; - }; - - vddcpu: regulator-vddcpu { - /* - * SY8120B1ABC DC/DC Regulator. - */ - compatible = "pwm-regulator"; - - regulator-name = "VDDCPU"; - regulator-min-microvolt = <690000>; - regulator-max-microvolt = <1050000>; - - pwm-supply = <&dc_in>; - - pwms = <&pwm_AO_cd 1 1250 0>; - pwm-dutycycle-range = <100 0>; - - regulator-boot-on; - regulator-always-on; - }; - - /* USB Hub Power Enable */ - vl_pwr_en: regulator-vl_pwr_en { - compatible = "regulator-fixed"; - regulator-name = "VL_PWR_EN"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&dc_in>; - - gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - sound { compatible = "amlogic,axg-sound-card"; model = "BPI-M5"; @@ -233,7 +64,6 @@ assigned-clock-rates = <294912000>, <270950400>, <393216000>; - status = "okay"; dai-link-0 { sound-dai = <&frddr_a>; @@ -319,68 +149,17 @@ status = "okay"; }; -&arb { - status = "okay"; -}; &clkc_audio { status = "okay"; }; -&cpu0 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cpu1 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU1_CLK>; - clock-latency = <50000>; -}; - -&cpu2 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU2_CLK>; - clock-latency = <50000>; -}; - -&cpu3 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU3_CLK>; - clock-latency = <50000>; -}; - &cvbs_vdac_port { cvbs_vdac_out: endpoint { remote-endpoint = <&cvbs_connector_in>; }; }; -&ext_mdio { - external_phy: ethernet-phy@0 { - /* Realtek RTL8211F (0x001cc916) */ - reg = <0>; - max-speed = <1000>; - - interrupt-parent = <&gpio_intc>; - /* MAC_INTR on GPIOZ_14 */ - interrupts = <26 IRQ_TYPE_LEVEL_LOW>; - }; -}; - -ðmac { - pinctrl-0 = <ð_pins>, <ð_rgmii_pins>; - pinctrl-names = "default"; - status = "okay"; - phy-mode = "rgmii-txid"; - phy-handle = <&external_phy>; -}; - &frddr_a { status = "okay"; }; @@ -393,192 +172,6 @@ status = "okay"; }; -&gpio { - gpio-line-names = - /* GPIOZ */ - "ETH_MDIO", /* GPIOZ_0 */ - "ETH_MDC", /* GPIOZ_1 */ - "ETH_RXCLK", /* GPIOZ_2 */ - "ETH_RX_DV", /* GPIOZ_3 */ - "ETH_RXD0", /* GPIOZ_4 */ - "ETH_RXD1", /* GPIOZ_5 */ - "ETH_RXD2", /* GPIOZ_6 */ - "ETH_RXD3", /* GPIOZ_7 */ - "ETH_TXCLK", /* GPIOZ_8 */ - "ETH_TXEN", /* GPIOZ_9 */ - "ETH_TXD0", /* GPIOZ_10 */ - "ETH_TXD1", /* GPIOZ_11 */ - "ETH_TXD2", /* GPIOZ_12 */ - "ETH_TXD3", /* GPIOZ_13 */ - "ETH_INTR", /* GPIOZ_14 */ - "ETH_NRST", /* GPIOZ_15 */ - /* GPIOH */ - "HDMI_SDA", /* GPIOH_0 */ - "HDMI_SCL", /* GPIOH_1 */ - "HDMI_HPD", /* GPIOH_2 */ - "HDMI_CEC", /* GPIOH_3 */ - "VL-RST_N", /* GPIOH_4 */ - "CON1-P36", /* GPIOH_5 */ - "VL-PWREN", /* GPIOH_6 */ - "WiFi_3V3_1V8", /* GPIOH_7 */ - "TFLASH_VDD_EN", /* GPIOH_8 */ - /* BOOT */ - "eMMC_D0", /* BOOT_0 */ - "eMMC_D1", /* BOOT_1 */ - "eMMC_D2", /* BOOT_2 */ - "eMMC_D3", /* BOOT_3 */ - "eMMC_D4", /* BOOT_4 */ - "eMMC_D5", /* BOOT_5 */ - "eMMC_D6", /* BOOT_6 */ - "eMMC_D7", /* BOOT_7 */ - "eMMC_CLK", /* BOOT_8 */ - "", - "eMMC_CMD", /* BOOT_10 */ - "", - "eMMC_RST#", /* BOOT_12 */ - "eMMC_DS", /* BOOT_13 */ - "", "", - /* GPIOC */ - "SD_D0_B", /* GPIOC_0 */ - "SD_D1_B", /* GPIOC_1 */ - "SD_D2_B", /* GPIOC_2 */ - "SD_D3_B", /* GPIOC_3 */ - "SD_CLK_B", /* GPIOC_4 */ - "SD_CMD_B", /* GPIOC_5 */ - "CARD_EN_DET", /* GPIOC_6 */ - "", - /* GPIOA */ - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", - "CON1-P27", /* GPIOA_14 */ - "CON1-P28", /* GPIOA_15 */ - /* GPIOX */ - "CON1-P16", /* GPIOX_0 */ - "CON1-P18", /* GPIOX_1 */ - "CON1-P22", /* GPIOX_2 */ - "CON1-P11", /* GPIOX_3 */ - "CON1-P13", /* GPIOX_4 */ - "CON1-P07", /* GPIOX_5 */ - "CON1-P33", /* GPIOX_6 */ - "CON1-P15", /* GPIOX_7 */ - "CON1-P19", /* GPIOX_8 */ - "CON1-P21", /* GPIOX_9 */ - "CON1-P24", /* GPIOX_10 */ - "CON1-P23", /* GPIOX_11 */ - "CON1-P08", /* GPIOX_12 */ - "CON1-P10", /* GPIOX_13 */ - "CON1-P29", /* GPIOX_14 */ - "CON1-P31", /* GPIOX_15 */ - "CON1-P26", /* GPIOX_16 */ - "CON1-P03", /* GPIOX_17 */ - "CON1-P05", /* GPIOX_18 */ - "CON1-P32"; /* GPIOX_19 */ - - /* - * WARNING: The USB Hub on the BPI-M5 needs a reset signal - * to be turned high in order to be detected by the USB Controller - * This signal should be handled by a USB specific power sequence - * in order to reset the Hub when USB bus is powered down. - */ - usb-hub { - gpio-hog; - gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>; - output-high; - line-name = "usb-hub-reset"; - }; -}; - -&gpio_ao { - gpio-line-names = - /* GPIOAO */ - "DEBUG TX", /* GPIOAO_0 */ - "DEBUG RX", /* GPIOAO_1 */ - "SYS_LED2", /* GPIOAO_2 */ - "UPDATE_KEY", /* GPIOAO_3 */ - "CON1-P40", /* GPIOAO_4 */ - "IR_IN", /* GPIOAO_5 */ - "TF_3V3N_1V8_EN", /* GPIOAO_6 */ - "CON1-P35", /* GPIOAO_7 */ - "CON1-P12", /* GPIOAO_8 */ - "CON1-P37", /* GPIOAO_9 */ - "CON1-P38", /* GPIOAO_10 */ - "SYS_LED", /* GPIOAO_11 */ - /* GPIOE */ - "VDDEE_PWM", /* GPIOE_0 */ - "VDDCPU_PWM", /* GPIOE_1 */ - "TF_PWR_EN"; /* GPIOE_2 */ -}; - -&hdmi_tx { - status = "okay"; - pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; - pinctrl-names = "default"; - hdmi-supply = <&dc_in>; -}; - -&hdmi_tx_tmds_port { - hdmi_tx_tmds_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; -}; - -&ir { - status = "okay"; - pinctrl-0 = <&remote_input_ao_pins>; - pinctrl-names = "default"; -}; - -&pwm_AO_cd { - pinctrl-0 = <&pwm_ao_d_e_pins>; - pinctrl-names = "default"; - clocks = <&xtal>; - clock-names = "clkin1"; - status = "okay"; -}; - -&saradc { - status = "okay"; - vref-supply = <&vddao_1v8>; -}; - -/* SD card */ -&sd_emmc_b { - status = "okay"; - pinctrl-0 = <&sdcard_c_pins>; - pinctrl-1 = <&sdcard_clk_gate_c_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <4>; - cap-sd-highspeed; - max-frequency = <50000000>; - disable-wp; - - /* TOFIX: SD card is barely usable in SDR modes */ - - cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; - vmmc-supply = <&tflash_vdd>; - vqmmc-supply = <&vddio_c>; -}; - -/* eMMC */ -&sd_emmc_c { - status = "okay"; - pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; - pinctrl-1 = <&emmc_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <8>; - cap-mmc-highspeed; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - max-frequency = <200000000>; - disable-wp; - - mmc-pwrseq = <&emmc_pwrseq>; - vmmc-supply = <&vddao_3v3>; - vqmmc-supply = <&emmc_1v8>; -}; - &tdmif_b { status = "okay"; }; @@ -626,22 +219,3 @@ &toddr_c { status = "okay"; }; - -&uart_AO { - status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; - pinctrl-names = "default"; -}; - -&usb { - status = "okay"; -}; - -&usb2_phy0 { - phy-supply = <&dc_in>; -}; - -&usb2_phy1 { - /* Enable the hub which is connected to this port */ - phy-supply = <&vl_pwr_en>; -}; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi new file mode 100644 index 000000000000..bb492581f1b7 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi @@ -0,0 +1,435 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2021 BayLibre SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + */ + +#include "meson-sm1.dtsi" +#include <dt-bindings/leds/common.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/gpio/meson-g12a-gpio.h> + +/ { + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 2>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + + button-sw3 { + label = "SW3"; + linux,code = <BTN_3>; + press-threshold-microvolt = <1700000>; + }; + }; + + aliases { + serial0 = &uart_AO; + ethernet0 = ðmac; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + key { + label = "SW1"; + linux,code = <BTN_1>; + gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio_intc>; + interrupts = <3 IRQ_TYPE_EDGE_BOTH>; + }; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-green { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_STATUS; + gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; + }; + + led-blue { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_STATUS; + gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; + + emmc_1v8: regulator-emmc_1v8 { + compatible = "regulator-fixed"; + regulator-name = "EMMC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + dc_in: regulator-dc_in { + compatible = "regulator-fixed"; + regulator-name = "DC_IN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + vddio_c: regulator-vddio_c { + compatible = "regulator-gpio"; + regulator-name = "VDDIO_C"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + enable-gpio = <&gpio_ao GPIOE_2 GPIO_OPEN_DRAIN>; + enable-active-high; + regulator-always-on; + + gpios = <&gpio_ao GPIOAO_6 GPIO_OPEN_DRAIN>; + gpios-states = <1>; + + states = <1800000 0>, + <3300000 1>; + }; + + tflash_vdd: regulator-tflash_vdd { + compatible = "regulator-fixed"; + regulator-name = "TFLASH_VDD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&dc_in>; + gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; + enable-active-high; + regulator-always-on; + }; + + vddao_1v8: regulator-vddao_1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + vddao_3v3: regulator-vddao_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&dc_in>; + regulator-always-on; + }; + + vddcpu: regulator-vddcpu { + /* + * SY8120B1ABC DC/DC Regulator. + */ + compatible = "pwm-regulator"; + + regulator-name = "VDDCPU"; + regulator-min-microvolt = <690000>; + regulator-max-microvolt = <1050000>; + + pwm-supply = <&dc_in>; + + pwms = <&pwm_AO_cd 1 1250 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; + + /* USB Hub Power Enable */ + vl_pwr_en: regulator-vl_pwr_en { + compatible = "regulator-fixed"; + regulator-name = "VL_PWR_EN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_in>; + + gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&arb { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu1 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU1_CLK>; + clock-latency = <50000>; +}; + +&cpu2 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU2_CLK>; + clock-latency = <50000>; +}; + +&cpu3 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU3_CLK>; + clock-latency = <50000>; +}; + +&ext_mdio { + external_phy: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ + reg = <0>; + max-speed = <1000>; + + interrupt-parent = <&gpio_intc>; + /* MAC_INTR on GPIOZ_14 */ + interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +ðmac { + pinctrl-0 = <ð_pins>, <ð_rgmii_pins>; + pinctrl-names = "default"; + status = "okay"; + phy-mode = "rgmii-txid"; + phy-handle = <&external_phy>; +}; + +&gpio { + gpio-line-names = + /* GPIOZ */ + "ETH_MDIO", /* GPIOZ_0 */ + "ETH_MDC", /* GPIOZ_1 */ + "ETH_RXCLK", /* GPIOZ_2 */ + "ETH_RX_DV", /* GPIOZ_3 */ + "ETH_RXD0", /* GPIOZ_4 */ + "ETH_RXD1", /* GPIOZ_5 */ + "ETH_RXD2", /* GPIOZ_6 */ + "ETH_RXD3", /* GPIOZ_7 */ + "ETH_TXCLK", /* GPIOZ_8 */ + "ETH_TXEN", /* GPIOZ_9 */ + "ETH_TXD0", /* GPIOZ_10 */ + "ETH_TXD1", /* GPIOZ_11 */ + "ETH_TXD2", /* GPIOZ_12 */ + "ETH_TXD3", /* GPIOZ_13 */ + "ETH_INTR", /* GPIOZ_14 */ + "ETH_NRST", /* GPIOZ_15 */ + /* GPIOH */ + "HDMI_SDA", /* GPIOH_0 */ + "HDMI_SCL", /* GPIOH_1 */ + "HDMI_HPD", /* GPIOH_2 */ + "HDMI_CEC", /* GPIOH_3 */ + "VL-RST_N", /* GPIOH_4 */ + "CON1-P36", /* GPIOH_5 */ + "VL-PWREN", /* GPIOH_6 */ + "WiFi_3V3_1V8", /* GPIOH_7 */ + "TFLASH_VDD_EN", /* GPIOH_8 */ + /* BOOT */ + "eMMC_D0", /* BOOT_0 */ + "eMMC_D1", /* BOOT_1 */ + "eMMC_D2", /* BOOT_2 */ + "eMMC_D3", /* BOOT_3 */ + "eMMC_D4", /* BOOT_4 */ + "eMMC_D5", /* BOOT_5 */ + "eMMC_D6", /* BOOT_6 */ + "eMMC_D7", /* BOOT_7 */ + "eMMC_CLK", /* BOOT_8 */ + "", + "eMMC_CMD", /* BOOT_10 */ + "", + "eMMC_RST#", /* BOOT_12 */ + "eMMC_DS", /* BOOT_13 */ + "", "", + /* GPIOC */ + "SD_D0_B", /* GPIOC_0 */ + "SD_D1_B", /* GPIOC_1 */ + "SD_D2_B", /* GPIOC_2 */ + "SD_D3_B", /* GPIOC_3 */ + "SD_CLK_B", /* GPIOC_4 */ + "SD_CMD_B", /* GPIOC_5 */ + "CARD_EN_DET", /* GPIOC_6 */ + "", + /* GPIOA */ + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", + "CON1-P27", /* GPIOA_14 */ + "CON1-P28", /* GPIOA_15 */ + /* GPIOX */ + "CON1-P16", /* GPIOX_0 */ + "CON1-P18", /* GPIOX_1 */ + "CON1-P22", /* GPIOX_2 */ + "CON1-P11", /* GPIOX_3 */ + "CON1-P13", /* GPIOX_4 */ + "CON1-P07", /* GPIOX_5 */ + "CON1-P33", /* GPIOX_6 */ + "CON1-P15", /* GPIOX_7 */ + "CON1-P19", /* GPIOX_8 */ + "CON1-P21", /* GPIOX_9 */ + "CON1-P24", /* GPIOX_10 */ + "CON1-P23", /* GPIOX_11 */ + "CON1-P08", /* GPIOX_12 */ + "CON1-P10", /* GPIOX_13 */ + "CON1-P29", /* GPIOX_14 */ + "CON1-P31", /* GPIOX_15 */ + "CON1-P26", /* GPIOX_16 */ + "CON1-P03", /* GPIOX_17 */ + "CON1-P05", /* GPIOX_18 */ + "CON1-P32"; /* GPIOX_19 */ + + /* + * WARNING: The USB Hub needs a reset signal to be turned high in + * order to be detected by the USB Controller. This signal should + * be handled by a USB specific power sequence to reset the Hub + * when the USB bus is powered down. + */ + usb-hub { + gpio-hog; + gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "usb-hub-reset"; + }; +}; + +&gpio_ao { + gpio-line-names = + /* GPIOAO */ + "DEBUG TX", /* GPIOAO_0 */ + "DEBUG RX", /* GPIOAO_1 */ + "SYS_LED2", /* GPIOAO_2 */ + "UPDATE_KEY", /* GPIOAO_3 */ + "CON1-P40", /* GPIOAO_4 */ + "IR_IN", /* GPIOAO_5 */ + "TF_3V3N_1V8_EN", /* GPIOAO_6 */ + "CON1-P35", /* GPIOAO_7 */ + "CON1-P12", /* GPIOAO_8 */ + "CON1-P37", /* GPIOAO_9 */ + "CON1-P38", /* GPIOAO_10 */ + "SYS_LED", /* GPIOAO_11 */ + /* GPIOE */ + "VDDEE_PWM", /* GPIOE_0 */ + "VDDCPU_PWM", /* GPIOE_1 */ + "TF_PWR_EN"; /* GPIOE_2 */ +}; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; + pinctrl-names = "default"; + hdmi-supply = <&dc_in>; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + +&pwm_AO_cd { + pinctrl-0 = <&pwm_ao_d_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin1"; + status = "okay"; +}; + +&saradc { + status = "okay"; + vref-supply = <&vddao_1v8>; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_c_pins>; + pinctrl-1 = <&sdcard_clk_gate_c_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <50000000>; + disable-wp; + + /* TOFIX: SD card is barely usable in SDR modes */ + + cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&tflash_vdd>; + vqmmc-supply = <&vddio_c>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + max-frequency = <200000000>; + disable-wp; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&emmc_1v8>; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +&usb { + status = "okay"; +}; + +&usb2_phy0 { + phy-supply = <&dc_in>; +}; + +&usb2_phy1 { + /* Enable the hub which is connected to this port */ + phy-supply = <&vl_pwr_en>; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts index e3486f60645a..74088e7280fe 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts @@ -76,9 +76,17 @@ }; &cpu_thermal { + trips { + cpu_active: cpu-active { + temperature = <60000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "active"; + }; + }; + cooling-maps { map { - trip = <&cpu_passive>; + trip = <&cpu_active>; cooling-device = <&fan0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; @@ -131,10 +139,6 @@ }; &usb { - phys = <&usb2_phy1>; - phy-names = "usb2-phy1"; -}; - -&usb2_phy0 { - status = "disabled"; + phys = <&usb2_phy0>, <&usb2_phy1>; + phy-names = "usb2-phy0", "usb2-phy1"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi index 56ca0ba2241e..617d322af0df 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi @@ -548,3 +548,7 @@ &usb { power-domains = <&pwrc PWRC_SM1_USB_ID>; }; + +&npu { + power-domains = <&pwrc PWRC_SM1_NNA_ID>; +}; diff --git a/arch/arm64/boot/dts/apm/apm-merlin.dts b/arch/arm64/boot/dts/apm/apm-merlin.dts index 049e7a5edca7..2e8069002ec1 100644 --- a/arch/arm64/boot/dts/apm/apm-merlin.dts +++ b/arch/arm64/boot/dts/apm/apm-merlin.dts @@ -45,38 +45,38 @@ }; &serial0 { - status = "ok"; + status = "okay"; }; &sata1 { - status = "ok"; + status = "okay"; }; &sata2 { - status = "ok"; + status = "okay"; }; &sata3 { - status = "ok"; + status = "okay"; }; &sgenet0 { - status = "ok"; + status = "okay"; }; &xgenet1 { - status = "ok"; + status = "okay"; }; &mmc0 { - status = "ok"; + status = "okay"; }; &i2c4 { rtc68: rtc@68 { compatible = "dallas,ds1337"; reg = <0x68>; - status = "ok"; + status = "okay"; }; }; diff --git a/arch/arm64/boot/dts/apm/apm-mustang.dts b/arch/arm64/boot/dts/apm/apm-mustang.dts index efac50aeca64..033e10e12b18 100644 --- a/arch/arm64/boot/dts/apm/apm-mustang.dts +++ b/arch/arm64/boot/dts/apm/apm-mustang.dts @@ -45,36 +45,36 @@ }; &pcie0clk { - status = "ok"; + status = "okay"; }; &pcie0 { - status = "ok"; + status = "okay"; }; &serial0 { - status = "ok"; + status = "okay"; }; &menet { - status = "ok"; + status = "okay"; }; &sgenet0 { - status = "ok"; + status = "okay"; }; &sgenet1 { - status = "ok"; + status = "okay"; }; &xgenet { - status = "ok"; + status = "okay"; rxlos-gpios = <&sbgpio 12 1>; }; &mmc0 { - status = "ok"; + status = "okay"; }; &mdio { diff --git a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi index a8526f8157ec..70a10bcafcff 100644 --- a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi +++ b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi @@ -588,7 +588,6 @@ }; serial0: serial@10600000 { - device_type = "serial"; compatible = "ns16550"; reg = <0 0x10600000 0x0 0x1000>; reg-shift = <2>; diff --git a/arch/arm64/boot/dts/apm/apm-storm.dtsi b/arch/arm64/boot/dts/apm/apm-storm.dtsi index f56d687f772d..d73e809fe41a 100644 --- a/arch/arm64/boot/dts/apm/apm-storm.dtsi +++ b/arch/arm64/boot/dts/apm/apm-storm.dtsi @@ -270,7 +270,7 @@ reg = <0x0 0x1f22c000 0x0 0x1000>; reg-names = "csr-reg"; clock-output-names = "sataphy2clk"; - status = "ok"; + status = "okay"; csr-offset = <0x4>; csr-mask = <0x3a>; enable-offset = <0x0>; @@ -284,7 +284,7 @@ reg = <0x0 0x1f23c000 0x0 0x1000>; reg-names = "csr-reg"; clock-output-names = "sataphy3clk"; - status = "ok"; + status = "okay"; csr-offset = <0x4>; csr-mask = <0x3a>; enable-offset = <0x0>; @@ -763,7 +763,6 @@ serial0: serial@1c020000 { status = "disabled"; - device_type = "serial"; compatible = "ns16550a"; reg = <0 0x1c020000 0x0 0x1000>; reg-shift = <2>; @@ -774,7 +773,6 @@ serial1: serial@1c021000 { status = "disabled"; - device_type = "serial"; compatible = "ns16550a"; reg = <0 0x1c021000 0x0 0x1000>; reg-shift = <2>; @@ -785,7 +783,6 @@ serial2: serial@1c022000 { status = "disabled"; - device_type = "serial"; compatible = "ns16550a"; reg = <0 0x1c022000 0x0 0x1000>; reg-shift = <2>; @@ -796,7 +793,6 @@ serial3: serial@1c023000 { status = "disabled"; - device_type = "serial"; compatible = "ns16550a"; reg = <0 0x1c023000 0x0 0x1000>; reg-shift = <2>; @@ -864,7 +860,7 @@ reg = <0x0 0x1f22a000 0x0 0x100>; #phy-cells = <1>; clocks = <&sataphy2clk 0>; - status = "ok"; + status = "okay"; apm,tx-boost-gain = <30 30 30 30 30 30>; apm,tx-eye-tuning = <1 10 10 2 10 10>; }; @@ -874,7 +870,7 @@ reg = <0x0 0x1f23a000 0x0 0x100>; #phy-cells = <1>; clocks = <&sataphy3clk 0>; - status = "ok"; + status = "okay"; apm,tx-boost-gain = <31 31 31 31 31 31>; apm,tx-eye-tuning = <2 10 10 2 10 10>; }; @@ -903,7 +899,7 @@ <0x0 0x1f227000 0x0 0x1000>; interrupts = <0x0 0x87 0x4>; dma-coherent; - status = "ok"; + status = "okay"; clocks = <&sata23clk 0>; phys = <&phy2 0>; phy-names = "sata-phy"; @@ -917,7 +913,7 @@ <0x0 0x1f23e000 0x0 0x1000>; interrupts = <0x0 0x88 0x4>; dma-coherent; - status = "ok"; + status = "okay"; clocks = <&sata45clk 0>; phys = <&phy3 0>; phy-names = "sata-phy"; diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi index 18cdbc20f03f..e1b80e569cdf 100644 --- a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi +++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi @@ -294,7 +294,7 @@ clock-names = "apb_pclk"; }; - smmu: mmu@64000000 { + smmu: iommu@64000000 { compatible = "arm,mmu-500"; reg = <0x64000000 0x40000>; #global-interrupts = <2>; diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi index e05901abe957..a9186166c068 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi @@ -186,7 +186,7 @@ }; }; - smmu: mmu@3000000 { + smmu: iommu@3000000 { compatible = "arm,mmu-500"; reg = <0x03000000 0x80000>; #global-interrupts = <1>; @@ -475,7 +475,6 @@ }; uart0: serial@100000 { - device_type = "serial"; compatible = "snps,dw-apb-uart"; reg = <0x00100000 0x1000>; reg-shift = <2>; @@ -486,7 +485,6 @@ }; uart1: serial@110000 { - device_type = "serial"; compatible = "snps,dw-apb-uart"; reg = <0x00110000 0x1000>; reg-shift = <2>; @@ -497,7 +495,6 @@ }; uart2: serial@120000 { - device_type = "serial"; compatible = "snps,dw-apb-uart"; reg = <0x00120000 0x1000>; reg-shift = <2>; @@ -508,7 +505,6 @@ }; uart3: serial@130000 { - device_type = "serial"; compatible = "snps,dw-apb-uart"; reg = <0x00130000 0x1000>; reg-shift = <2>; diff --git a/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi index 72ccf18eb9d1..540b4d6c9067 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi @@ -6,7 +6,7 @@ * Chanwoo Choi <cw00.choi@samsung.com> */ -&soc { +/ { bus_g2d_400: bus0 { compatible = "samsung,exynos-bus"; clocks = <&cmu_top CLK_ACLK_G2D_400>; diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi index bde6a6bb8dfc..f54f30633417 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi @@ -96,14 +96,21 @@ max98504: amplifier@31 { compatible = "maxim,max98504"; reg = <0x31>; - maxim,rx-path = <1>; - maxim,tx-path = <1>; - maxim,tx-channel-mask = <3>; - maxim,tx-channel-source = <2>; + + DIOVDD-supply = <&ldo3_reg>; + DVDD-supply = <&ldo3_reg>; + PVDD-supply = <&vph_pwr_regulator>; }; }; - irda_regulator: irda-regulator { + vph_pwr_regulator: regulator-vph-pwr { + compatible = "regulator-fixed"; + regulator-name = "VPH_PWR"; + regulator-min-microvolt = <4200000>; + regulator-max-microvolt = <4200000>; + }; + + irda_regulator: regulator-irda { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpr3 3 GPIO_ACTIVE_HIGH>; @@ -925,7 +932,6 @@ compatible = "maxim,max77843-haptic"; haptic-supply = <&ldo38_reg>; pwms = <&pwm 0 33670 0>; - pwm-names = "haptic"; }; }; }; @@ -1279,11 +1285,13 @@ gpio-controller; #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; wlf,micd-detect-debounce = <300>; wlf,micd-bias-start-time = <0x1>; wlf,micd-rate = <0x7>; - wlf,micd-dbtime = <0x1>; + wlf,micd-dbtime = <0x2>; wlf,micd-force-micbias; wlf,micd-configs = <0x0 1 0>; wlf,hpdet-channel = <1>; @@ -1299,6 +1307,8 @@ CPVDD-supply = <&ldo18_reg>; DBVDD2-supply = <&ldo18_reg>; DBVDD3-supply = <&ldo18_reg>; + SPKVDDL-supply = <&vph_pwr_regulator>; + SPKVDDR-supply = <&vph_pwr_regulator>; controller-data { samsung,spi-feedback-delay = <0>; @@ -1315,7 +1325,7 @@ reg = <0x0>; spi-max-frequency = <5000000>; power-supply = <&irda_regulator>; - duty-cycle = <60>; + duty-cycle = /bits/ 8 <60>; led-active-low; controller-data { diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi index bd6a354b9cb5..5519a80576c5 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi @@ -89,7 +89,6 @@ compatible = "arm,cortex-a53"; enable-method = "psci"; reg = <0x100>; - clock-frequency = <1300000000>; clocks = <&cmu_apollo CLK_SCLK_APOLLO>; clock-names = "apolloclk"; operating-points-v2 = <&cluster_a53_opp_table>; @@ -108,7 +107,6 @@ compatible = "arm,cortex-a53"; enable-method = "psci"; reg = <0x101>; - clock-frequency = <1300000000>; operating-points-v2 = <&cluster_a53_opp_table>; #cooling-cells = <2>; i-cache-size = <0x8000>; @@ -125,7 +123,6 @@ compatible = "arm,cortex-a53"; enable-method = "psci"; reg = <0x102>; - clock-frequency = <1300000000>; operating-points-v2 = <&cluster_a53_opp_table>; #cooling-cells = <2>; i-cache-size = <0x8000>; @@ -142,7 +139,6 @@ compatible = "arm,cortex-a53"; enable-method = "psci"; reg = <0x103>; - clock-frequency = <1300000000>; operating-points-v2 = <&cluster_a53_opp_table>; #cooling-cells = <2>; i-cache-size = <0x8000>; @@ -159,7 +155,6 @@ compatible = "arm,cortex-a57"; enable-method = "psci"; reg = <0x0>; - clock-frequency = <1900000000>; clocks = <&cmu_atlas CLK_SCLK_ATLAS>; clock-names = "atlasclk"; operating-points-v2 = <&cluster_a57_opp_table>; @@ -178,7 +173,6 @@ compatible = "arm,cortex-a57"; enable-method = "psci"; reg = <0x1>; - clock-frequency = <1900000000>; operating-points-v2 = <&cluster_a57_opp_table>; #cooling-cells = <2>; i-cache-size = <0xc000>; @@ -195,7 +189,6 @@ compatible = "arm,cortex-a57"; enable-method = "psci"; reg = <0x2>; - clock-frequency = <1900000000>; operating-points-v2 = <&cluster_a57_opp_table>; #cooling-cells = <2>; i-cache-size = <0xc000>; @@ -212,7 +205,6 @@ compatible = "arm,cortex-a57"; enable-method = "psci"; reg = <0x3>; - clock-frequency = <1900000000>; operating-points-v2 = <&cluster_a57_opp_table>; #cooling-cells = <2>; i-cache-size = <0xc000>; @@ -226,6 +218,8 @@ cluster_a57_l2: l2-cache0 { compatible = "cache"; + cache-level = <2>; + cache-unified; cache-size = <0x200000>; cache-line-size = <64>; cache-sets = <2048>; @@ -233,6 +227,8 @@ cluster_a53_l2: l2-cache1 { compatible = "cache"; + cache-level = <2>; + cache-unified; cache-size = <0x40000>; cache-line-size = <64>; cache-sets = <256>; @@ -355,7 +351,7 @@ compatible = "arm,psci"; method = "smc"; cpu_off = <0x84000002>; - cpu_on = <0xC4000003>; + cpu_on = <0xc4000003>; }; soc: soc@0 { @@ -1024,7 +1020,7 @@ dsi: dsi@13900000 { compatible = "samsung,exynos5433-mipi-dsi"; - reg = <0x13900000 0xC0>; + reg = <0x13900000 0xc0>; interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>; phys = <&mipi_phy 1>; phy-names = "dsim"; @@ -1118,22 +1114,26 @@ }; syscon_disp: syscon@13b80000 { - compatible = "samsung,exynos5433-sysreg", "syscon"; + compatible = "samsung,exynos5433-disp-sysreg", + "samsung,exynos5433-sysreg", "syscon"; reg = <0x13b80000 0x1010>; }; syscon_cam0: syscon@120f0000 { - compatible = "samsung,exynos5433-sysreg", "syscon"; + compatible = "samsung,exynos5433-cam0-sysreg", + "samsung,exynos5433-sysreg", "syscon"; reg = <0x120f0000 0x1020>; }; syscon_cam1: syscon@145f0000 { - compatible = "samsung,exynos5433-sysreg", "syscon"; + compatible = "samsung,exynos5433-cam1-sysreg", + "samsung,exynos5433-sysreg", "syscon"; reg = <0x145f0000 0x1038>; }; syscon_fsys: syscon@156f0000 { - compatible = "samsung,exynos5433-sysreg", "syscon"; + compatible = "samsung,exynos5433-fsys-sysreg", + "samsung,exynos5433-sysreg", "syscon"; reg = <0x156f0000 0x1044>; }; @@ -1272,7 +1272,7 @@ mfc: codec@152e0000 { compatible = "samsung,exynos5433-mfc"; - reg = <0x152E0000 0x10000>; + reg = <0x152e0000 0x10000>; interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; clock-names = "pclk", "aclk", "aclk_xiu"; clocks = <&cmu_mfc CLK_PCLK_MFC>, @@ -1329,7 +1329,7 @@ sysmmu_gscl0: sysmmu@13c80000 { compatible = "samsung,exynos-sysmmu"; - reg = <0x13C80000 0x1000>; + reg = <0x13c80000 0x1000>; interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; clock-names = "aclk", "pclk"; clocks = <&cmu_gscl CLK_ACLK_SMMU_GSCL0>, @@ -1340,7 +1340,7 @@ sysmmu_gscl1: sysmmu@13c90000 { compatible = "samsung,exynos-sysmmu"; - reg = <0x13C90000 0x1000>; + reg = <0x13c90000 0x1000>; interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; clock-names = "aclk", "pclk"; clocks = <&cmu_gscl CLK_ACLK_SMMU_GSCL1>, @@ -1351,7 +1351,7 @@ sysmmu_gscl2: sysmmu@13ca0000 { compatible = "samsung,exynos-sysmmu"; - reg = <0x13CA0000 0x1000>; + reg = <0x13ca0000 0x1000>; interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>; clock-names = "aclk", "pclk"; clocks = <&cmu_gscl CLK_ACLK_SMMU_GSCL2>, @@ -1742,7 +1742,7 @@ status = "disabled"; }; - usbdrd30: usbdrd { + usbdrd30: usb@15400000 { compatible = "samsung,exynos5433-dwusb3"; clocks = <&cmu_fsys CLK_ACLK_USBDRD30>, <&cmu_fsys CLK_SCLK_USBDRD30>, @@ -1751,16 +1751,16 @@ clock-names = "aclk", "susp_clk", "phyclk", "pipe_pclk"; #address-cells = <1>; #size-cells = <1>; - ranges; + ranges = <0x0 0x15400000 0x10000>; status = "disabled"; - usbdrd_dwc3: usb@15400000 { + usbdrd_dwc3: usb@0 { compatible = "snps,dwc3"; clocks = <&cmu_fsys CLK_SCLK_USBDRD30>, <&cmu_fsys CLK_ACLK_USBDRD30>, <&cmu_fsys CLK_SCLK_USBDRD30>; clock-names = "ref", "bus_early", "suspend"; - reg = <0x15400000 0x10000>; + reg = <0x0 0x10000>; interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>; phys = <&usbdrd30_phy 0>, <&usbdrd30_phy 1>; phy-names = "usb2-phy", "usb3-phy"; @@ -1795,7 +1795,7 @@ status = "disabled"; }; - usbhost30: usbhost { + usbhost30: usb@15a00000 { compatible = "samsung,exynos5433-dwusb3"; clocks = <&cmu_fsys CLK_ACLK_USBHOST30>, <&cmu_fsys CLK_SCLK_USBHOST30>, @@ -1804,16 +1804,16 @@ clock-names = "aclk", "susp_clk", "phyclk", "pipe_pclk"; #address-cells = <1>; #size-cells = <1>; - ranges; + ranges = <0x0 0x15a00000 0x10000>; status = "disabled"; - usbhost_dwc3: usb@15a00000 { + usbhost_dwc3: usb@0 { compatible = "snps,dwc3"; clocks = <&cmu_fsys CLK_SCLK_USBHOST30>, <&cmu_fsys CLK_ACLK_USBHOST30>, <&cmu_fsys CLK_SCLK_USBHOST30>; clock-names = "ref", "bus_early", "suspend"; - reg = <0x15a00000 0x10000>; + reg = <0x0 0x10000>; interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>; phys = <&usbhost30_phy 0>, <&usbhost30_phy 1>; phy-names = "usb2-phy", "usb3-phy"; diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts index e38c59cf18dc..f3f4a6ab4b49 100644 --- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts +++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts @@ -28,7 +28,7 @@ memory@40000000 { device_type = "memory"; - reg = <0x0 0x40000000 0x0 0xC0000000>; + reg = <0x0 0x40000000 0x0 0xc0000000>; }; usb30_vbus_reg: regulator-usb30 { @@ -61,7 +61,6 @@ &gpu { mali-supply = <&buck6_reg>; - status = "okay"; }; &serial_2 { @@ -79,12 +78,11 @@ }; &adc { + vdd-supply = <&ldo3_reg>; status = "okay"; }; &hsi2c_4 { - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <200000>; status = "okay"; pmic@66 { diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi index 1cd771c90b47..b1fa68835b09 100644 --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi @@ -107,6 +107,8 @@ atlas_l2: l2-cache0 { compatible = "cache"; + cache-level = <2>; + cache-unified; cache-size = <0x200000>; cache-line-size = <64>; cache-sets = <2048>; @@ -117,7 +119,7 @@ compatible = "arm,psci"; method = "smc"; cpu_off = <0x84000002>; - cpu_on = <0xC4000003>; + cpu_on = <0xc4000003>; }; soc: soc@0 { @@ -144,7 +146,7 @@ pdma0: dma-controller@10e10000 { compatible = "arm,pl330", "arm,primecell"; - reg = <0x10E10000 0x1000>; + reg = <0x10e10000 0x1000>; interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock_fsys0 ACLK_PDMA0>; clock-names = "apb_pclk"; @@ -153,7 +155,7 @@ pdma1: dma-controller@10eb0000 { compatible = "arm,pl330", "arm,primecell"; - reg = <0x10EB0000 0x1000>; + reg = <0x10eb0000 0x1000>; interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock_fsys0 ACLK_PDMA1>; clock-names = "apb_pclk"; @@ -688,7 +690,7 @@ #phy-cells = <1>; }; - usbdrd: usb { + usbdrd: usb@15400000 { compatible = "samsung,exynos7-dwusb3"; clocks = <&clock_fsys0 ACLK_USBDRD300>, <&clock_fsys0 SCLK_USBDRD300_SUSPENDCLK>, @@ -697,11 +699,11 @@ "usbdrd30_axius_clk"; #address-cells = <1>; #size-cells = <1>; - ranges; + ranges = <0x0 0x15400000 0x10000>; - usb@15400000 { + usb@0 { compatible = "snps,dwc3"; - reg = <0x15400000 0x10000>; + reg = <0x0 0x10000>; interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>; phy-names = "usb2-phy", "usb3-phy"; diff --git a/arch/arm64/boot/dts/exynos/exynos850-e850-96.dts b/arch/arm64/boot/dts/exynos/exynos850-e850-96.dts index f52a55f644f7..6ed38912507f 100644 --- a/arch/arm64/boot/dts/exynos/exynos850-e850-96.dts +++ b/arch/arm64/boot/dts/exynos/exynos850-e850-96.dts @@ -106,7 +106,7 @@ gpios = <&gpg2 7 GPIO_ACTIVE_HIGH>; color = <LED_COLOR_ID_BLUE>; function = LED_FUNCTION_BLUETOOTH; - linux,default-trigger = "hci0rx"; + linux,default-trigger = "hci0-power"; default-state = "off"; }; }; diff --git a/arch/arm64/boot/dts/exynos/exynos850.dtsi b/arch/arm64/boot/dts/exynos/exynos850.dtsi index c61441f3a89a..a38fe5129937 100644 --- a/arch/arm64/boot/dts/exynos/exynos850.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos850.dtsi @@ -549,13 +549,15 @@ }; sysreg_peri: syscon@10020000 { - compatible = "samsung,exynos850-sysreg", "syscon"; + compatible = "samsung,exynos850-peri-sysreg", + "samsung,exynos850-sysreg", "syscon"; reg = <0x10020000 0x10000>; clocks = <&cmu_peri CLK_GOUT_SYSREG_PERI_PCLK>; }; sysreg_cmgp: syscon@11c20000 { - compatible = "samsung,exynos850-sysreg", "syscon"; + compatible = "samsung,exynos850-cmgp-sysreg", + "samsung,exynos850-sysreg", "syscon"; reg = <0x11c20000 0x10000>; clocks = <&cmu_cmgp CLK_GOUT_SYSREG_CMGP_PCLK>; }; diff --git a/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts b/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts index eec3192c0631..101f51bf565a 100644 --- a/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts +++ b/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts @@ -65,13 +65,11 @@ &ufs_0 { status = "okay"; vcc-supply = <&ufs_0_fixed_vcc_reg>; - vcc-fixed-regulator; }; &ufs_1 { status = "okay"; vcc-supply = <&ufs_1_fixed_vcc_reg>; - vcc-fixed-regulator; }; &usi_0 { diff --git a/arch/arm64/boot/dts/exynos/exynosautov9.dtsi b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi index 5dc361734cfe..d3c5cdeff47f 100644 --- a/arch/arm64/boot/dts/exynos/exynosautov9.dtsi +++ b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi @@ -370,17 +370,20 @@ }; syscon_fsys2: syscon@17c20000 { - compatible = "samsung,exynosautov9-sysreg", "syscon"; + compatible = "samsung,exynosautov9-fsys2-sysreg", + "samsung,exynosautov9-sysreg", "syscon"; reg = <0x17c20000 0x1000>; }; syscon_peric0: syscon@10220000 { - compatible = "samsung,exynosautov9-sysreg", "syscon"; + compatible = "samsung,exynosautov9-peric0-sysreg", + "samsung,exynosautov9-sysreg", "syscon"; reg = <0x10220000 0x2000>; }; syscon_peric1: syscon@10820000 { - compatible = "samsung,exynosautov9-sysreg", "syscon"; + compatible = "samsung,exynosautov9-peric1-sysreg", + "samsung,exynosautov9-sysreg", "syscon"; reg = <0x10820000 0x2000>; }; diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index ef6f364eaa18..198fff3731ae 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -75,8 +75,10 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7903.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7904.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-dahlia.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-dev.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-yavia.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-dahlia.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-dev.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-yavia.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-beacon-kit.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-bsh-smm-s2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-bsh-smm-s2pro.dtb @@ -86,6 +88,8 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-tqma8mqnl-mba8mx.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-var-som-symphony.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-venice-gw7902.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mp-beacon-kit.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mp-debix-model-a.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-icore-mx8mp-edimm2.2.dtb @@ -95,8 +99,14 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw74xx.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-dahlia.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-dev.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-yavia.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-dahlia.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-dev.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-yavia.dtb + +imx8mp-tqma8mpql-mba8mpxl-lvds-dtbs += imx8mp-tqma8mpql-mba8mpxl.dtb imx8mp-tqma8mpql-mba8mpxl-lvds.dtbo +dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl-lvds.dtb + dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-hummingboard-pulse.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-kontron-pitx-imx8m.dtb diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts index 5a8d85a7d161..bbdf989058ff 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts @@ -110,7 +110,7 @@ &i2c0 { status = "okay"; - pca9547@77 { + i2c-mux@77 { compatible = "nxp,pca9547"; reg = <0x77>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts index 73eb6061c73e..af9194eca556 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts @@ -56,10 +56,14 @@ }; &enetc_port2 { + nvmem-cells = <&base_mac_address 2>; + nvmem-cell-names = "mac-address"; status = "okay"; }; &enetc_port3 { + nvmem-cells = <&base_mac_address 3>; + nvmem-cell-names = "mac-address"; status = "okay"; }; @@ -80,6 +84,8 @@ managed = "in-band-status"; phy-handle = <&qsgmii_phy0>; phy-mode = "qsgmii"; + nvmem-cells = <&base_mac_address 4>; + nvmem-cell-names = "mac-address"; status = "okay"; }; @@ -88,6 +94,8 @@ managed = "in-band-status"; phy-handle = <&qsgmii_phy1>; phy-mode = "qsgmii"; + nvmem-cells = <&base_mac_address 5>; + nvmem-cell-names = "mac-address"; status = "okay"; }; @@ -96,6 +104,8 @@ managed = "in-band-status"; phy-handle = <&qsgmii_phy2>; phy-mode = "qsgmii"; + nvmem-cells = <&base_mac_address 6>; + nvmem-cell-names = "mac-address"; status = "okay"; }; @@ -104,6 +114,8 @@ managed = "in-band-status"; phy-handle = <&qsgmii_phy3>; phy-mode = "qsgmii"; + nvmem-cells = <&base_mac_address 7>; + nvmem-cell-names = "mac-address"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts index 7cd29ab970d9..1f34c7553459 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts @@ -55,5 +55,7 @@ &enetc_port1 { phy-handle = <&phy0>; phy-mode = "rgmii-id"; + nvmem-cells = <&base_mac_address 0>; + nvmem-cell-names = "mac-address"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts index 113b1df74bf8..aac41192caa1 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts @@ -36,10 +36,14 @@ }; &enetc_port2 { + nvmem-cells = <&base_mac_address 2>; + nvmem-cell-names = "mac-address"; status = "okay"; }; &enetc_port3 { + nvmem-cells = <&base_mac_address 3>; + nvmem-cell-names = "mac-address"; status = "okay"; }; @@ -52,6 +56,8 @@ managed = "in-band-status"; phy-handle = <&phy0>; phy-mode = "sgmii"; + nvmem-cells = <&base_mac_address 0>; + nvmem-cell-names = "mac-address"; status = "okay"; }; @@ -60,6 +66,8 @@ managed = "in-band-status"; phy-handle = <&phy1>; phy-mode = "sgmii"; + nvmem-cells = <&base_mac_address 1>; + nvmem-cell-names = "mac-address"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts index 9b5e92fb753e..a4421db3784e 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts @@ -43,5 +43,7 @@ &enetc_port1 { phy-handle = <&phy1>; phy-mode = "rgmii-id"; + nvmem-cells = <&base_mac_address 1>; + nvmem-cell-names = "mac-address"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts index 4ab17b984b03..8b65af4a7147 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts @@ -92,6 +92,8 @@ phy-handle = <&phy0>; phy-mode = "sgmii"; managed = "in-band-status"; + nvmem-cells = <&base_mac_address 0>; + nvmem-cell-names = "mac-address"; status = "okay"; }; @@ -154,6 +156,21 @@ label = "bootloader environment"; }; }; + + otp-1 { + compatible = "user-otp"; + + nvmem-layout { + compatible = "kontron,sl28-vpd"; + + serial_number: serial-number { + }; + + base_mac_address: base-mac-address { + #nvmem-cell-cells = <1>; + }; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi index 1b33cabb4e14..9e50976bcb8e 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi @@ -713,6 +713,7 @@ reg = <0 0x5000000 0 0x800000>; #global-interrupts = <8>; #iommu-cells = <1>; + dma-coherent; stream-match-mask = <0x7c00>; /* global secure fault */ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts index 9b726c2a4842..dda27ed7aaf2 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts @@ -89,7 +89,7 @@ &i2c0 { status = "okay"; - pca9547@77 { + i2c-mux@77 { compatible = "nxp,pca9547"; reg = <0x77>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts index b2fcbba60d3a..3b0ed9305f2b 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts @@ -88,7 +88,7 @@ &i2c0 { status = "okay"; - pca9547@77 { + i2c-mux@77 { compatible = "nxp,pca9547"; reg = <0x77>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts index 7025aad8ae89..07f6cc6e354a 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts @@ -153,8 +153,8 @@ }; ethernet@f2000 { /* 10GEC2 */ - fixed-link = <0 1 1000 0 0>; - phy-connection-type = "xgmii"; + phy-connection-type = "10gbase-r"; + managed = "in-band-status"; }; mdio@fc000 { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts index 41d8b15f25a5..aa52ff73ff9e 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts @@ -53,7 +53,7 @@ &i2c0 { status = "okay"; - i2c-switch@77 { + i2c-mux@77 { compatible = "nxp,pca9547"; reg = <0x77>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts index 1bfbce69cc8b..ee8e932628d1 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts @@ -136,7 +136,7 @@ &i2c0 { status = "okay"; - i2c-switch@77 { + i2c-mux@77 { compatible = "nxp,pca9547"; reg = <0x77>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts index ef6c8967533e..d4867d6cf47c 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts @@ -245,7 +245,7 @@ &i2c3 { status = "okay"; - i2c-switch@70 { + i2c-mux@70 { compatible = "nxp,pca9540"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi index 260d045dbd9a..e5fb137ac02b 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi @@ -674,6 +674,7 @@ reg = <0 0x5000000 0 0x800000>; #iommu-cells = <1>; stream-match-mask = <0x7C00>; + dma-coherent; #global-interrupts = <12>; // global secure fault interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi index f598669e742f..52c5a43b30a0 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi @@ -103,7 +103,7 @@ &i2c0 { status = "okay"; - pca9547@77 { + i2c-mux@77 { compatible = "nxp,pca9547"; reg = <0x77>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi index 3d9647b3da14..537cecb13dd0 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi @@ -44,7 +44,7 @@ &i2c0 { status = "okay"; - pca9547@75 { + i2c-mux@75 { compatible = "nxp,pca9547"; reg = <0x75>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi index afb455210bd0..d32a52ab00a4 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi @@ -54,7 +54,7 @@ &i2c0 { status = "okay"; - i2c-switch@77 { + i2c-mux@77 { compatible = "nxp,pca9547"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts index 280a9c9d8bd9..1bcf228a22b8 100644 --- a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts @@ -135,6 +135,7 @@ reg = <0>; eee-broken-1000t; qca,disable-smarteee; + qca,disable-hibernation-mode; vddio-supply = <&vddio0>; vddio0: vddio-regulator { diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi index 6b416fb760d5..ca195e6d8f37 100644 --- a/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi @@ -67,7 +67,7 @@ reg = <0x5b0e0200 0x200>; }; - usbphy2: usbphy@0x5b110000 { + usbphy2: usbphy@5b110000 { compatible = "fsl,imx8dxl-usbphy", "fsl,imx7ulp-usbphy"; reg = <0x5b110000 0x1000>; clocks = <&usb2_2_lpcg IMX_LPCG_CLK_7>; diff --git a/arch/arm64/boot/dts/freescale/imx8dxl.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl.dtsi index 0c64b9194621..214f21bd0cb4 100644 --- a/arch/arm64/boot/dts/freescale/imx8dxl.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8dxl.dtsi @@ -164,7 +164,7 @@ sc_pwrkey: keys { compatible = "fsl,imx8qxp-sc-key", "fsl,imx-sc-key"; - linux,keycode = <KEY_POWER>; + linux,keycodes = <KEY_POWER>; wakeup-source; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi index 03266bd90a06..bc531175ff76 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi @@ -120,7 +120,7 @@ &ecspi2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_espi2>; - cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; status = "okay"; eeprom@0 { @@ -241,9 +241,8 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie0>; reset-gpio = <&gpio4 21 GPIO_ACTIVE_LOW>; - clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>, - <&pcie0_refclk_gated>; - clock-names = "pcie", "pcie_aux", "pcie_bus"; + clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcie0_refclk_gated>, + <&clk IMX8MM_CLK_PCIE1_AUX>; assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>, <&clk IMX8MM_CLK_PCIE1_CTRL>; assigned-clock-rates = <10000000>, <250000000>; @@ -316,7 +315,7 @@ MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x82 MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x82 MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x82 - MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x41 + MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x41 >; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts b/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts index 24f61db33eba..b1f2beb40a98 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts @@ -88,6 +88,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_watchdog_gpio>; compatible = "linux,wdt-gpio"; + always-running; gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; hw_algo = "level"; /* Reset triggers in 2..3 seconds */ @@ -275,7 +276,7 @@ compatible = "rohm,bd71847"; reg = <0x4b>; #clock-cells = <0>; - clocks = <&clk_xtal32k 0>; + clocks = <&clk_xtal32k>; clock-output-names = "clk-32k-out"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pmic>; @@ -904,9 +905,8 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie0>; reset-gpio = <&gpio1 5 GPIO_ACTIVE_LOW>; - clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>, - <&pcieclk 0>; - clock-names = "pcie", "pcie_aux", "pcie_bus"; + clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcieclk 0>, + <&clk IMX8MM_CLK_PCIE1_AUX>; assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>, <&clk IMX8MM_CLK_PCIE1_CTRL>; assigned-clock-rates = <10000000>, <250000000>; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-emcon.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-emcon.dtsi index 0dbdc9ec3fe5..3d859a350bd5 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-emcon.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-emcon.dtsi @@ -18,14 +18,14 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_led>; - green { + led-green { label = "som:green"; gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>; default-state = "on"; linux,default-trigger = "heartbeat"; }; - red { + led-red { label = "som:red"; gpios = <&gpio5 10 GPIO_ACTIVE_HIGH>; default-state = "off"; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi index e0b604ac0da4..d1a6390976a9 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi @@ -340,7 +340,7 @@ status = "okay"; pca6416: gpio@20 { - compatible = "ti,tca6416"; + compatible = "nxp,pca6416"; reg = <0x20>; gpio-controller; #gpio-cells = <2>; @@ -360,9 +360,8 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie0>; reset-gpio = <&gpio4 21 GPIO_ACTIVE_LOW>; - clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>, - <&pcie0_refclk>; - clock-names = "pcie", "pcie_aux", "pcie_bus"; + clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcie0_refclk>, + <&clk IMX8MM_CLK_PCIE1_AUX>; assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>, <&clk IMX8MM_CLK_PCIE1_CTRL>; assigned-clock-rates = <10000000>, <250000000>; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15.dtsi index 44e87b1568e7..299752aa8277 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15.dtsi @@ -210,9 +210,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie0>; reset-gpio = <&gpio5 21 GPIO_ACTIVE_LOW>; - clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_PHY>, - <&clk IMX8MM_CLK_PCIE1_AUX>; - clock-names = "pcie", "pcie_bus", "pcie_aux"; fsl,max-link-speed = <1>; assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>, <&clk IMX8MM_CLK_PCIE1_CTRL>; assigned-clock-rates = <10000000>, <250000000>; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts index a079322a3793..dcec57c20399 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts @@ -13,6 +13,8 @@ aliases { ethernet1 = &usbnet; + rtc0 = &rx8900; + rtc1 = &snvs_rtc; }; /* fixed crystal dedicated to mcp2515 */ @@ -136,7 +138,7 @@ pinctrl-0 = <&pinctrl_i2c4>; status = "okay"; - rtc@32 { + rx8900: rtc@32 { compatible = "epson,rx8900"; reg = <0x32>; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi index 5172883717d1..6e75ab879bf5 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi @@ -10,6 +10,11 @@ model = "Kontron OSM-S i.MX8MM (N802X SOM)"; compatible = "kontron,imx8mm-osm-s", "fsl,imx8mm"; + aliases { + rtc0 = &rv3028; + rtc1 = &snvs_rtc; + }; + memory@40000000 { device_type = "memory"; /* @@ -200,7 +205,7 @@ }; }; - rtc@52 { + rv3028: rtc@52 { compatible = "microcrystal,rv3028"; reg = <0x52>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts b/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts index 43e89859c044..0b123a84018b 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts @@ -10,6 +10,7 @@ / { model = "MENLO MX8MM EMBEDDED DEVICE"; compatible = "menlo,mx8menlo", + "toradex,verdin-imx8mm-nonwifi", "toradex,verdin-imx8mm", "fsl,imx8mm"; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts b/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts index 74c09891600f..6357078185ed 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts @@ -214,7 +214,7 @@ pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; - i2cmux@70 { + i2c-mux@70 { compatible = "nxp,pca9540"; reg = <0x70>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts index 4a3df2b77b0b..266129b4a70d 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts @@ -175,9 +175,6 @@ assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>, <&clk IMX8MM_SYS_PLL2_250M>; assigned-clock-rates = <10000000>, <250000000>; - clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>, - <&clk IMX8MM_CLK_PCIE1_PHY>; - clock-names = "pcie", "pcie_aux", "pcie_bus"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie>; reset-gpio = <&gpio4 9 GPIO_ACTIVE_LOW>; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h b/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h index 83c8f715cd90..b1f11098d248 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h +++ b/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h @@ -602,7 +602,7 @@ #define MX8MM_IOMUXC_UART1_RXD_GPIO5_IO22 0x234 0x49C 0x000 0x5 0x0 #define MX8MM_IOMUXC_UART1_RXD_TPSMP_HDATA24 0x234 0x49C 0x000 0x7 0x0 #define MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x238 0x4A0 0x000 0x0 0x0 -#define MX8MM_IOMUXC_UART1_TXD_UART1_DTE_RX 0x238 0x4A0 0x4F4 0x0 0x0 +#define MX8MM_IOMUXC_UART1_TXD_UART1_DTE_RX 0x238 0x4A0 0x4F4 0x0 0x1 #define MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI 0x238 0x4A0 0x000 0x1 0x0 #define MX8MM_IOMUXC_UART1_TXD_GPIO5_IO23 0x238 0x4A0 0x000 0x5 0x0 #define MX8MM_IOMUXC_UART1_TXD_TPSMP_HDATA25 0x238 0x4A0 0x000 0x7 0x0 diff --git a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts index a0aeac619929..156d793a0c97 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts @@ -79,9 +79,8 @@ &pcie0 { reset-gpio = <&expander0 14 GPIO_ACTIVE_LOW>; - clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>, - <&pcie0_refclk>; - clock-names = "pcie", "pcie_aux", "pcie_bus"; + clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcie0_refclk>, + <&clk IMX8MM_CLK_PCIE1_AUX>; assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>, <&clk IMX8MM_CLK_PCIE1_CTRL>; assigned-clock-rates = <10000000>, <250000000>; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi index f649dfacb4b6..12260290c109 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi @@ -87,8 +87,8 @@ sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; - sensor0: temperature-sensor-eeprom@1b { - compatible = "nxp,se97", "jedec,jc-42.4-temp"; + sensor0: temperature-sensor@1b { + compatible = "nxp,se97b", "jedec,jc-42.4-temp"; reg = <0x1b>; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi index ae0721b807e1..2b83a5258ec6 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi @@ -231,7 +231,6 @@ }; ldo5_reg: LDO5 { - regulator-compatible = "ldo5"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi index c557dbf4dcd6..0ce60ad9c7d5 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi @@ -120,9 +120,8 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie0>; reset-gpio = <&gpio4 6 GPIO_ACTIVE_LOW>; - clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>, - <&pcie0_refclk>; - clock-names = "pcie", "pcie_aux", "pcie_bus"; + clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcie0_refclk>, + <&clk IMX8MM_CLK_PCIE1_AUX>; assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>, <&clk IMX8MM_CLK_PCIE1_CTRL>; assigned-clock-rates = <10000000>, <250000000>; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dtso b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dtso index 3ea73a6886ff..f6ad1a4b8b66 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dtso +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dtso @@ -33,7 +33,6 @@ pinctrl-0 = <&pinctrl_uart2>; rts-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>; cts-gpios = <&gpio5 28 GPIO_ACTIVE_LOW>; - uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi index 41d0de6a7027..570992a52b75 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi @@ -142,9 +142,8 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie0>; reset-gpio = <&gpio4 6 GPIO_ACTIVE_LOW>; - clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>, - <&pcie0_refclk>; - clock-names = "pcie", "pcie_aux", "pcie_bus"; + clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcie0_refclk>, + <&clk IMX8MM_CLK_PCIE1_AUX>; assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>, <&clk IMX8MM_CLK_PCIE1_CTRL>; assigned-clock-rates = <10000000>, <250000000>; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs232-rts.dtso b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs232-rts.dtso index 2fa635e1c1a8..1f8ea20dfafc 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs232-rts.dtso +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs232-rts.dtso @@ -33,7 +33,6 @@ pinctrl-0 = <&pinctrl_uart2>; rts-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>; cts-gpios = <&gpio5 28 GPIO_ACTIVE_LOW>; - uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi index 244ef8d6cc68..1800c6a4b1fc 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi @@ -162,9 +162,8 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie0>; reset-gpio = <&gpio4 6 GPIO_ACTIVE_LOW>; - clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>, - <&pcie0_refclk>; - clock-names = "pcie", "pcie_aux", "pcie_bus"; + clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcie0_refclk>, + <&clk IMX8MM_CLK_PCIE1_AUX>; assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>, <&clk IMX8MM_CLK_PCIE1_CTRL>; assigned-clock-rates = <10000000>, <250000000>; @@ -222,7 +221,6 @@ pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_bten>; cts-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>; rts-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; - uart-has-rtscts; status = "okay"; bluetooth { diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts index 750a1f07ecb7..df3b2c93d2d5 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts @@ -702,9 +702,8 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie0>; reset-gpio = <&gpio5 2 GPIO_ACTIVE_LOW>; - clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>, - <&pcie0_refclk>; - clock-names = "pcie", "pcie_aux", "pcie_bus"; + clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcie0_refclk>, + <&clk IMX8MM_CLK_PCIE1_AUX>; assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>, <&clk IMX8MM_CLK_PCIE1_CTRL>; assigned-clock-rates = <10000000>, <250000000>; @@ -733,7 +732,6 @@ dtr-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; dsr-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; dcd-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; - uart-has-rtscts; status = "okay"; }; @@ -749,7 +747,6 @@ pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>; cts-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; rts-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; - uart-has-rtscts; status = "okay"; }; @@ -758,7 +755,6 @@ pinctrl-0 = <&pinctrl_uart4>, <&pinctrl_uart4_gpio>; cts-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>; rts-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>; - uart-has-rtscts; status = "okay"; }; @@ -771,6 +767,7 @@ &usbotg2 { dr_mode = "host"; vbus-supply = <®_usb2_vbus>; + over-current-active-low; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts index 32872b0b1aaf..c33ec6826d32 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts @@ -623,9 +623,8 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie0>; reset-gpio = <&gpio4 5 GPIO_ACTIVE_LOW>; - clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>, - <&pcie0_refclk>; - clock-names = "pcie", "pcie_aux", "pcie_bus"; + clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcie0_refclk>, + <&clk IMX8MM_CLK_PCIE1_AUX>; assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>, <&clk IMX8MM_CLK_PCIE1_CTRL>; assigned-clock-rates = <10000000>, <250000000>; @@ -664,7 +663,6 @@ pinctrl-0 = <&pinctrl_uart1>, <&pinctrl_uart1_gpio>; rts-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; cts-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>; - uart-has-rtscts; status = "okay"; }; @@ -681,7 +679,6 @@ pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>; rts-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; cts-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; - uart-has-rtscts; status = "okay"; bluetooth { @@ -699,7 +696,6 @@ dtr-gpios = <&gpio4 3 GPIO_ACTIVE_LOW>; dsr-gpios = <&gpio4 4 GPIO_ACTIVE_LOW>; dcd-gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; - uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts index 8ce562246a08..363020a08c9b 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts @@ -557,9 +557,8 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie0>; reset-gpio = <&gpio5 11 GPIO_ACTIVE_LOW>; - clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>, - <&pcie0_refclk>; - clock-names = "pcie", "pcie_aux", "pcie_bus"; + clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcie0_refclk>, + <&clk IMX8MM_CLK_PCIE1_AUX>; assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>, <&clk IMX8MM_CLK_PCIE1_CTRL>; assigned-clock-rates = <10000000>, <250000000>; @@ -581,7 +580,6 @@ dtr-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; dsr-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; dcd-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; - uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts index eceed9816f5d..93088fa1c3b9 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts @@ -618,9 +618,8 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie0>; reset-gpio = <&gpio5 11 GPIO_ACTIVE_LOW>; - clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>, - <&pcie0_refclk>; - clock-names = "pcie", "pcie_aux", "pcie_bus"; + clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcie0_refclk>, + <&clk IMX8MM_CLK_PCIE1_AUX>; assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>, <&clk IMX8MM_CLK_PCIE1_CTRL>; assigned-clock-rates = <10000000>, <250000000>; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi index c2a5c2f7b204..1cff0b829357 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi @@ -9,6 +9,7 @@ simple-audio-card,bitclock-master = <&dailink_master>; simple-audio-card,format = "i2s"; simple-audio-card,frame-master = <&dailink_master>; + simple-audio-card,mclk-fs = <256>; simple-audio-card,name = "imx8mm-wm8904"; simple-audio-card,routing = "Headphone Jack", "HPOUTL", @@ -136,11 +137,13 @@ /* Verdin USB_1 */ &usbotg1 { + disable-over-current; status = "okay"; }; /* Verdin USB_2 */ &usbotg2 { + disable-over-current; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-dev.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin-dev.dtsi index 73cc3fafa018..3c4b8ca125e3 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-verdin-dev.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-dev.dtsi @@ -3,14 +3,13 @@ * Copyright 2022 Toradex */ -#include "imx8mm-verdin-dahlia.dtsi" - / { sound_card: sound-card { compatible = "simple-audio-card"; simple-audio-card,bitclock-master = <&dailink_master>; simple-audio-card,format = "i2s"; simple-audio-card,frame-master = <&dailink_master>; + simple-audio-card,mclk-fs = <256>; simple-audio-card,name = "imx8mm-nau8822"; simple-audio-card,routing = "Headphones", "LHP", @@ -41,27 +40,121 @@ }; }; +/* Verdin SPI_1 */ +&ecspi2 { + status = "okay"; +}; + +/* EEPROM on display adapter boards */ +&eeprom_display_adapter { + status = "okay"; +}; + +/* EEPROM on Verdin Development board */ +&eeprom_carrier_board { + status = "okay"; +}; + +&fec1 { + status = "okay"; +}; + +/* Verdin QSPI_1 */ +&flexspi { + status = "okay"; +}; + +/* Current measurement into module VCC */ +&hwmon { + status = "okay"; +}; + +&hwmon_temp { + vs-supply = <®_1p8v>; + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + &gpio_expander_21 { status = "okay"; }; /* Verdin I2C_1 */ &i2c4 { + status = "okay"; + /* Audio Codec */ nau8822_1a: audio-codec@1a { compatible = "nuvoton,nau8822"; reg = <0x1a>; + #sound-dai-cells = <0>; }; }; +/* Verdin PCIE_1 */ +&pcie0 { + status = "okay"; +}; + +&pcie_phy { + status = "okay"; +}; + +/* Verdin PWM_3_DSI */ +&pwm1 { + status = "okay"; +}; + +/* Verdin PWM_1 */ +&pwm2 { + status = "okay"; +}; + +/* Verdin PWM_2 */ +&pwm3 { + status = "okay"; +}; + +/* Verdin I2S_1 */ +&sai2 { + status = "okay"; +}; + +/* Verdin UART_3 */ +&uart1 { + status = "okay"; +}; + /* Verdin UART_1, connector X50 through RS485 transceiver */ &uart2 { linux,rs485-enabled-at-boot-time; rs485-rts-active-low; rs485-rx-during-tx; + status = "okay"; +}; + +/* Verdin UART_2 */ +&uart3 { + status = "okay"; +}; + +/* Verdin USB_1 */ +&usbotg1 { + disable-over-current; + status = "okay"; +}; + +/* Verdin USB_2 */ +&usbotg2 { + disable-over-current; + status = "okay"; }; /* Limit frequency on dev board due to long traces and bad signal integrity */ &usdhc2 { max-frequency = <100000000>; + status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-yavia.dts b/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-yavia.dts new file mode 100644 index 000000000000..c71825ecf2ea --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-yavia.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2023 Toradex + */ + +/dts-v1/; + +#include "imx8mm-verdin.dtsi" +#include "imx8mm-verdin-nonwifi.dtsi" +#include "imx8mm-verdin-yavia.dtsi" + +/ { + model = "Toradex Verdin iMX8M Mini on Yavia Board"; + compatible = "toradex,verdin-imx8mm-nonwifi-yavia", + "toradex,verdin-imx8mm-nonwifi", + "toradex,verdin-imx8mm", + "fsl,imx8mm"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-yavia.dts b/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-yavia.dts new file mode 100644 index 000000000000..fe39de9310d6 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-yavia.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2023 Toradex + */ + +/dts-v1/; + +#include "imx8mm-verdin.dtsi" +#include "imx8mm-verdin-wifi.dtsi" +#include "imx8mm-verdin-yavia.dtsi" + +/ { + model = "Toradex Verdin iMX8M Mini WB on Yavia Board"; + compatible = "toradex,verdin-imx8mm-wifi-yavia", + "toradex,verdin-imx8mm-wifi", + "toradex,verdin-imx8mm", + "fsl,imx8mm"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-yavia.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin-yavia.dtsi new file mode 100644 index 000000000000..1e28c78e381f --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-yavia.dtsi @@ -0,0 +1,169 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2023 Toradex + */ + +#include <dt-bindings/leds/common.h> + +/ { + leds { + compatible = "gpio-leds"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds_yavia>; + + /* SODIMM 52 - LD1_RED */ + led-0 { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_DEBUG; + function-enumerator = <1>; + gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>; + }; + /* SODIMM 54 - LD1_GREEN */ + led-1 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_DEBUG; + function-enumerator = <1>; + gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>; + }; + /* SODIMM 56 - LD1_BLUE */ + led-2 { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_DEBUG; + function-enumerator = <1>; + gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>; + }; + /* SODIMM 58 - LD2_RED */ + led-3 { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_DEBUG; + function-enumerator = <2>; + gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>; + }; + /* SODIMM 60 - LD2_GREEN */ + led-4 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_DEBUG; + function-enumerator = <2>; + gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>; + }; + /* SODIMM 62 - LD2_BLUE */ + led-5 { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_DEBUG; + function-enumerator = <2>; + gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +/* Verdin SPI_1 */ +&ecspi2 { + status = "okay"; +}; + +/* EEPROM on display adapter boards */ +&eeprom_display_adapter { + status = "okay"; +}; + +/* EEPROM on Verdin yavia board */ +&eeprom_carrier_board { + status = "okay"; +}; + +&fec1 { + status = "okay"; +}; + +&gpio3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpios_ext_yavia>; +}; + +&hwmon_temp { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +/* Verdin I2C_1 */ +&i2c4 { + status = "okay"; +}; + +/* Verdin PCIE_1 */ +&pcie0 { + status = "okay"; +}; + +&pcie_phy { + status = "okay"; +}; + +/* Verdin PWM_3_DSI */ +&pwm1 { + status = "okay"; +}; + +/* Verdin PWM_1 */ +&pwm2 { + status = "okay"; +}; + +/* Verdin PWM_2 */ +&pwm3 { + status = "okay"; +}; + +/* Verdin UART_3 */ +&uart1 { + status = "okay"; +}; + +/* Verdin UART_1 */ +&uart2 { + status = "okay"; +}; + +/* Verdin UART_2 */ +&uart3 { + status = "okay"; +}; + +/* Verdin USB_1 */ +&usbotg1 { + status = "okay"; +}; + +/* Verdin USB_2 */ +&usbotg2 { + status = "okay"; +}; + +/* Verdin SD_1 */ +&usdhc2 { + status = "okay"; +}; + +&iomuxc { + pinctrl_leds_yavia: ledsyaviagrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_ALE_GPIO3_IO0 0x106 /* SODIMM 52 */ + MX8MM_IOMUXC_NAND_CE0_B_GPIO3_IO1 0x106 /* SODIMM 54 */ + MX8MM_IOMUXC_NAND_DATA00_GPIO3_IO6 0x106 /* SODIMM 56 */ + MX8MM_IOMUXC_NAND_DATA01_GPIO3_IO7 0x106 /* SODIMM 58 */ + MX8MM_IOMUXC_NAND_DATA02_GPIO3_IO8 0x106 /* SODIMM 60 */ + MX8MM_IOMUXC_NAND_DATA03_GPIO3_IO9 0x106 /* SODIMM 62 */ + >; + }; + + pinctrl_gpios_ext_yavia: gpiosextyaviagrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2 0x106 /* SODIMM 64 */ + MX8MM_IOMUXC_NAND_DQS_GPIO3_IO14 0x106 /* SODIMM 66 */ + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi index 0d454e0e2f7c..88321b5b0693 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi @@ -56,7 +56,11 @@ hdmi_connector: hdmi-connector { compatible = "hdmi-connector"; ddc-i2c-bus = <&i2c2>; + /* Verdin PWM_3_DSI (SODIMM 19) */ + hpd-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; label = "hdmi"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm_3_dsi_hpd_gpio>; type = "a"; status = "disabled"; }; @@ -98,6 +102,7 @@ off-on-delay = <500000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_reg_eth>; + regulator-always-on; regulator-boot-on; regulator-max-microvolt = <3300000>; regulator-min-microvolt = <3300000>; @@ -358,7 +363,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pmic>; reg = <0x25>; - sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; /* * The bootloader is expected to switch on the I2C level shifter for the TLA2024 ADC @@ -598,7 +602,7 @@ hdmi_lontium_lt8912: hdmi@48 { compatible = "lontium,lt8912b"; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpio_10_dsi>, <&pinctrl_pwm_3_dsi_hpd_gpio>; + pinctrl-0 = <&pinctrl_gpio_10_dsi>; reg = <0x48>; /* Verdin GPIO_9_DSI (LT8912 INT, SODIMM 17, unused) */ /* Verdin GPIO_10_DSI (SODIMM 21) */ @@ -653,10 +657,6 @@ assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>, <&clk IMX8MM_SYS_PLL2_250M>; assigned-clock-rates = <10000000>, <250000000>; - clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, - <&clk IMX8MM_CLK_PCIE1_AUX>, - <&clk IMX8MM_CLK_PCIE1_PHY>; - clock-names = "pcie", "pcie_aux", "pcie_bus"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie0>; /* PCIE_1_RESET# (SODIMM 244) */ @@ -741,7 +741,6 @@ adp-disable; dr_mode = "otg"; hnp-disable; - over-current-active-low; samsung,picophy-dc-vol-level-adjust = <7>; samsung,picophy-pre-emp-curr-control = <3>; srp-disable; @@ -751,7 +750,6 @@ /* Verdin USB_2 */ &usbotg2 { dr_mode = "host"; - over-current-active-low; samsung,picophy-dc-vol-level-adjust = <7>; samsung,picophy-pre-emp-curr-control = <3>; vbus-supply = <®_usb_otg2_vbus>; diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi index 4ee89fdcf59b..31f4548f85cf 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi @@ -496,6 +496,8 @@ compatible = "fsl,imx8mm-tmu"; reg = <0x30260000 0x10000>; clocks = <&clk IMX8MM_CLK_TMU_ROOT>; + nvmem-cells = <&tmu_calib>; + nvmem-cell-names = "calib"; #thermal-sensor-cells = <0>; }; @@ -550,8 +552,8 @@ reg = <0x30330000 0x10000>; }; - gpr: iomuxc-gpr@30340000 { - compatible = "fsl,imx8mm-iomuxc-gpr", "fsl,imx6q-iomuxc-gpr", "syscon"; + gpr: syscon@30340000 { + compatible = "fsl,imx8mm-iomuxc-gpr", "syscon"; reg = <0x30340000 0x10000>; }; @@ -563,15 +565,32 @@ #address-cells = <1>; #size-cells = <1>; - imx8mm_uid: unique-id@410 { + /* + * The register address below maps to the MX8M + * Fusemap Description Table entries this way. + * Assuming + * reg = <ADDR SIZE>; + * then + * Fuse Address = (ADDR * 4) + 0x400 + * Note that if SIZE is greater than 4, then + * each subsequent fuse is located at offset + * +0x10 in Fusemap Description Table (e.g. + * reg = <0x4 0x8> describes fuses 0x410 and + * 0x420). + */ + imx8mm_uid: unique-id@4 { /* 0x410-0x420 */ reg = <0x4 0x8>; }; - cpu_speed_grade: speed-grade@10 { + cpu_speed_grade: speed-grade@10 { /* 0x440 */ reg = <0x10 4>; }; - fec_mac_address: mac-address@90 { + tmu_calib: calib@3c { /* 0x4f0 */ + reg = <0x3c 4>; + }; + + fec_mac_address: mac-address@90 { /* 0x640 */ reg = <0x90 6>; }; }; @@ -1240,7 +1259,6 @@ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3"; #dma-cells = <1>; dma-channels = <4>; clocks = <&clk IMX8MM_CLK_NAND_USDHC_BUS_RAWNAND_CLK>; @@ -1284,6 +1302,10 @@ <0 0 0 4 &gic GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; fsl,max-link-speed = <2>; linux,pci-domain = <0>; + clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, + <&clk IMX8MM_CLK_PCIE1_PHY>, + <&clk IMX8MM_CLK_PCIE1_AUX>; + clock-names = "pcie", "pcie_bus", "pcie_aux"; power-domains = <&pgc_pcie>; resets = <&src IMX8MQ_RESET_PCIE_CTRL_APPS_EN>, <&src IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF>; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi index 9ea28941068d..31ae338b7ed9 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi @@ -77,8 +77,8 @@ sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; - sensor0: temperature-sensor-eeprom@1b { - compatible = "nxp,se97", "jedec,jc-42.4-temp"; + sensor0: temperature-sensor@1b { + compatible = "nxp,se97b", "jedec,jc-42.4-temp"; reg = <0x1b>; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi index 87b5e23c766f..67072e6c77d5 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi @@ -207,7 +207,7 @@ }; ldo5_reg: LDO5 { - regulator-compatible = "ldo5"; + regulator-name = "ldo5"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts index b9444e4a3d2d..7c12518dbc96 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts +++ b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts @@ -643,7 +643,6 @@ pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>; rts-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; cts-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; - uart-has-rtscts; status = "okay"; bluetooth { diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi index b7d91df71cc2..ed9ac6c5047c 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi @@ -498,6 +498,8 @@ compatible = "fsl,imx8mn-tmu", "fsl,imx8mm-tmu"; reg = <0x30260000 0x10000>; clocks = <&clk IMX8MN_CLK_TMU_ROOT>; + nvmem-cells = <&tmu_calib>; + nvmem-cell-names = "calib"; #thermal-sensor-cells = <0>; }; @@ -552,7 +554,7 @@ reg = <0x30330000 0x10000>; }; - gpr: iomuxc-gpr@30340000 { + gpr: syscon@30340000 { compatible = "fsl,imx8mn-iomuxc-gpr", "syscon"; reg = <0x30340000 0x10000>; }; @@ -564,15 +566,32 @@ #address-cells = <1>; #size-cells = <1>; - imx8mn_uid: unique-id@410 { + /* + * The register address below maps to the MX8M + * Fusemap Description Table entries this way. + * Assuming + * reg = <ADDR SIZE>; + * then + * Fuse Address = (ADDR * 4) + 0x400 + * Note that if SIZE is greater than 4, then + * each subsequent fuse is located at offset + * +0x10 in Fusemap Description Table (e.g. + * reg = <0x4 0x8> describes fuses 0x410 and + * 0x420). + */ + imx8mn_uid: unique-id@4 { /* 0x410-0x420 */ reg = <0x4 0x8>; }; - cpu_speed_grade: speed-grade@10 { + cpu_speed_grade: speed-grade@10 { /* 0x440 */ reg = <0x10 4>; }; - fec_mac_address: mac-address@90 { + tmu_calib: calib@3c { /* 0x4f0 */ + reg = <0x3c 4>; + }; + + fec_mac_address: mac-address@90 { /* 0x640 */ reg = <0x90 6>; }; }; @@ -1094,7 +1113,6 @@ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3"; #dma-cells = <1>; dma-channels = <4>; clocks = <&clk IMX8MN_CLK_NAND_USDHC_BUS_RAWNAND_CLK>; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts b/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts new file mode 100644 index 000000000000..cdae45a48c2c --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts @@ -0,0 +1,550 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2023 Logic PD, Inc dba Beacon EmbeddedWorks + */ + +/dts-v1/; + +#include <dt-bindings/usb/pd.h> +#include <dt-bindings/phy/phy-imx8-pcie.h> +#include "imx8mp.dtsi" +#include "imx8mp-beacon-som.dtsi" + +/ { + model = "Beacon EmbeddedWorks i.MX8MPlus Development kit"; + compatible = "beacon,imx8mp-beacon-kit", "fsl,imx8mp"; + + aliases { + ethernet0 = &eqos; + ethernet1 = &fec; + }; + + chosen { + stdout-path = &uart2; + }; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + hs_ep: endpoint { + remote-endpoint = <&usb3_hs_ep>; + }; + }; + port@1 { + reg = <1>; + + ss_ep: endpoint { + remote-endpoint = <&hd3ss3220_in_ep>; + }; + }; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + + button-0 { + label = "btn0"; + linux,code = <BTN_0>; + gpios = <&pca6416_1 12 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + wakeup-source; + }; + + button-1 { + label = "btn1"; + linux,code = <BTN_1>; + gpios = <&pca6416_1 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + wakeup-source; + }; + + button-2 { + label = "btn2"; + linux,code = <BTN_2>; + gpios = <&pca6416_1 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + wakeup-source; + }; + + button-3 { + label = "btn3"; + linux,code = <BTN_3>; + gpios = <&pca6416_1 15 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led3>; + + led-0 { + label = "gen_led0"; + gpios = <&pca6416_1 4 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-1 { + label = "gen_led1"; + gpios = <&pca6416_1 5 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-2 { + label = "gen_led2"; + gpios = <&pca6416_1 6 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-3 { + label = "heartbeat"; + gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + pcie0_refclk: clock-pcie { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; + + reg_usdhc2_vmmc: regulator-usdhc2 { + compatible = "regulator-fixed"; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + startup-delay-us = <100>; + off-on-delay-us = <20000>; + }; + + reg_usb1_host_vbus: regulator-usb1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb1_host_vbus"; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + gpio = <&pca6416_1 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; + status = "okay"; + + tpm: tpm@0 { + compatible = "infineon,slb9670"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tpm>; + reset-gpios = <&gpio4 0 GPIO_ACTIVE_LOW>; + spi-max-frequency = <18500000>; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy1>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@3 { + compatible = "ethernet-phy-id0022.1640", + "ethernet-phy-ieee802.3-c22"; + reg = <3>; + reset-gpios = <&gpio4 18 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <150000>; + interrupt-parent = <&gpio4>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + }; + }; +}; + +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "okay"; +}; + +&gpio2 { + usb-mux-hog { + gpio-hog; + gpios = <20 0>; + output-low; + line-name = "USB-C Mux En"; + }; +}; + +&i2c2 { + clock-frequency = <384000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + pca6416_3: gpio@20 { + compatible = "nxp,pcal6416"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio4>; + interrupts = <27 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + }; +}; + +&i2c3 { + /* Connected to USB Hub */ + usb-typec@52 { + compatible = "nxp,ptn5110"; + reg = <0x52>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_typec>; + interrupt-parent = <&gpio4>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + power-role = "source"; + data-role = "host"; + source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>; + }; + }; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + clock-frequency = <384000>; + status = "okay"; + + pca6416: gpio@20 { + compatible = "nxp,pcal6416"; + reg = <0x20>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcal6414>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio4>; + interrupts = <27 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pca6416_1: gpio@21 { + compatible = "nxp,pcal6416"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio4>; + interrupts = <27 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + + usb-hub-hog { + gpio-hog; + gpios = <7 0>; + output-low; + line-name = "USB Hub Enable"; + }; + }; + + usb-typec@47 { + compatible = "ti,hd3ss3220"; + reg = <0x47>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hd3ss3220>; + interrupt-parent = <&gpio4>; + interrupts = <19 IRQ_TYPE_LEVEL_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + hd3ss3220_in_ep: endpoint { + remote-endpoint = <&ss_ep>; + }; + }; + + port@1 { + reg = <1>; + + hd3ss3220_out_ep: endpoint { + remote-endpoint = <&usb3_role_switch>; + }; + }; + }; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio4 21 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&pcie_phy { + fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>; + clocks = <&pcie0_refclk>; + clock-names = "ref"; + status = "okay"; +}; + +&snvs_pwrkey { + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + assigned-clocks = <&clk IMX8MP_CLK_UART3>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>; + uart-has-rtscts; + status = "okay"; +}; + +&usb3_0 { + status = "okay"; +}; + +&usb_dwc3_0 { + dr_mode = "otg"; + hnp-disable; + srp-disable; + adp-disable; + usb-role-switch; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + usb3_hs_ep: endpoint { + remote-endpoint = <&hs_ep>; + }; + }; + port@1 { + reg = <1>; + usb3_role_switch: endpoint { + remote-endpoint = <&hd3ss3220_out_ep>; + }; + }; + }; +}; + +&usb3_phy0 { + vbus-supply = <®_usb1_host_vbus>; + status = "okay"; +}; + +&usb3_1 { + status = "okay"; +}; + +&usb_dwc3_1 { + dr_mode = "host"; + status = "okay"; +}; + +&usb3_phy1 { + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_usdhc2_vmmc>; + bus-width = <4>; + status = "okay"; +}; + +&iomuxc { + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK 0x82 + MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI 0x82 + MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO 0x82 + MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13 0x40000 + >; + }; + + pinctrl_fec: fecgrp { + fsl,pins = < + MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x2 + MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x2 + MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x90 + MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x90 + MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x90 + MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x90 + MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x90 + MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x90 + MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x16 + MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x16 + MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x16 + MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x16 + MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x16 + MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x16 + MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02 0x140 + MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18 0x10 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX8MP_IOMUXC_SPDIF_RX__CAN1_RX 0x154 + MX8MP_IOMUXC_SPDIF_TX__CAN1_TX 0x154 + >; + }; + + pinctrl_hd3ss3220: hd3ss3220grp { + fsl,pins = < + MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19 0x140 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c2 + MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001c2 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL 0x400001c2 + MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA 0x400001c2 + >; + }; + + pinctrl_led3: led3grp { + fsl,pins = < + MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28 0x41 + >; + }; + + pinctrl_pcal6414: pcal6414-gpiogrp { + fsl,pins = < + MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27 0x10 + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05 0x10 /* PCIe_nDIS */ + MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21 0x10 /* PCIe_nRST */ + >; + }; + + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { + fsl,pins = < + MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x40 + >; + }; + + pinctrl_tpm: tpmgrp { + fsl,pins = < + MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00 0x19 /* Reset */ + MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29 0x1d6 /* IRQ */ + >; + }; + + pinctrl_typec: typec1grp { + fsl,pins = < + MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01 0xc4 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x140 + MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x140 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX8MP_IOMUXC_ECSPI1_SCLK__UART3_DCE_RX 0x140 + MX8MP_IOMUXC_ECSPI1_MOSI__UART3_DCE_TX 0x140 + MX8MP_IOMUXC_ECSPI1_SS0__UART3_DCE_RTS 0x140 + MX8MP_IOMUXC_ECSPI1_MISO__UART3_DCE_CTS 0x140 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0 + MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4 + MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6 + MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c4 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-beacon-som.dtsi new file mode 100644 index 000000000000..e5da90804780 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-beacon-som.dtsi @@ -0,0 +1,416 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2023 LogicPD, Inc. dba Beacon EmbeddedWorks + */ + +/ { + aliases { + rtc0 = &rtc; + rtc1 = &snvs_rtc; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0 0xc0000000>, + <0x1 0x00000000 0 0xc0000000>; + }; + + reg_wl_bt: regulator-wifi-bt { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_wl_bt>; + regulator-name = "wl-bt-pow-dwn"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 6 GPIO_ACTIVE_LOW>; + startup-delay-us = <70000>; + regulator-always-on; + }; +}; + +&A53_0 { + cpu-supply = <&buck2>; +}; + +&A53_1 { + cpu-supply = <&buck2>; +}; + +&A53_2 { + cpu-supply = <&buck2>; +}; + +&A53_3 { + cpu-supply = <&buck2>; +}; + +&eqos { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eqos>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + snps,force_thresh_dma_mode; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@3 { + compatible = "ethernet-phy-id0022.1640", + "ethernet-phy-ieee802.3-c22"; + reg = <3>; + reset-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio1>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; + }; + }; +}; + +&flexspi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexspi0>; + status = "okay"; + + flash0: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <80000000>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + clock-frequency = <384000>; + status = "okay"; + + pmic@25 { + compatible = "nxp,pca9450c"; + reg = <0x25>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio1>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + + regulators { + buck1: BUCK1 { + regulator-name = "BUCK1"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <2187500>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + }; + + buck2: BUCK2 { + regulator-name = "BUCK2"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <2187500>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + nxp,dvs-run-voltage = <950000>; + nxp,dvs-standby-voltage = <850000>; + }; + + buck4: BUCK4 { + regulator-name = "BUCK4"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + buck5: BUCK5 { + regulator-name = "BUCK5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + buck6: BUCK6 { + regulator-name = "BUCK6"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1: LDO1 { + regulator-name = "LDO1"; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3: LDO3 { + regulator-name = "LDO3"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4: LDO4 { + regulator-name = "LDO4"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo5: LDO5 { + regulator-name = "LDO5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + clock-frequency = <384000>; + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + pagesize = <32>; + read-only; /* Manufacturing EEPROM programmed at factory */ + }; + + rtc: rtc@51 { + compatible = "nxp,pcf85263"; + reg = <0x51>; + }; +}; + +&snvs_pwrkey { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + assigned-clocks = <&clk IMX8MP_CLK_UART1>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>; + uart-has-rtscts; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + bus-width = <4>; + vmmc-supply = <®_wl_bt>; + cap-sd-highspeed; + sd-uhs-sdr50; + sd-uhs-sdr104; + keep-power-in-suspend; + wakeup-source; + non-removable; + cap-power-off-card; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + mwifiex: wifi@1 { + compatible = "marvell,sd8997"; + reg = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wlan>; + interrupt-parent = <&gpio2>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_eqos: eqosgrp { + fsl,pins = < + MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x2 + MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x2 + MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x90 + MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x90 + MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x90 + MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x90 + MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x90 + MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x90 + MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x16 + MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x16 + MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x16 + MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x16 + MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x16 + MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x16 + MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 0x10 + MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10 0x10 + >; + }; + + pinctrl_flexspi0: flexspi0grp { + fsl,pins = < + MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK 0x1c2 + MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B 0x82 + MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00 0x82 + MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01 0x82 + MX8MP_IOMUXC_NAND_DATA02__FLEXSPI_A_DATA02 0x82 + MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03 0x82 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c2 + MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c2 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c2 + MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400001c2 + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x1c0 + >; + }; + + pinctrl_reg_wl_bt: reg-wl-btgrp { + fsl,pins = < + MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06 0x40 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX 0x140 + MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX 0x140 + MX8MP_IOMUXC_UART3_RXD__UART1_DCE_CTS 0x140 + MX8MP_IOMUXC_UART3_TXD__UART1_DCE_RTS 0x140 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x190 + MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d0 + MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d0 + MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d0 + MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d0 + MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d0 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x194 + MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d4 + MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d4 + MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d4 + MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d4 + MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d4 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x196 + MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d6 + MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d6 + MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d6 + MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d6 + MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d6 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d0 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d0 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d0 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d0 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d0 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d0 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d0 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d0 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d0 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x190 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x194 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d6 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d6 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d6 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d6 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d6 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d6 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d6 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d6 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x196 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0x166 + >; + }; + + pinctrl_wlan: wlangrp { + fsl,pins = < + MX8MP_IOMUXC_SD1_DATA7__GPIO2_IO09 0x140 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts b/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts new file mode 100644 index 000000000000..2876d18f2a38 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts @@ -0,0 +1,506 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2019 NXP + * Copyright 2022 Ideas on Board Oy + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/usb/pd.h> + +#include "imx8mp.dtsi" + +/ { + model = "Polyhex Debix Model A i.MX8MPlus board"; + compatible = "polyhex,imx8mp-debix-model-a", "polyhex,imx8mp-debix", "fsl,imx8mp"; + + chosen { + stdout-path = &uart2; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_led>; + + led-0 { + function = LED_FUNCTION_POWER; + color = <LED_COLOR_ID_RED>; + gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + reg_usdhc2_vmmc: regulator-usdhc2 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&A53_0 { + cpu-supply = <&buck2>; +}; + +&A53_1 { + cpu-supply = <&buck2>; +}; + +&A53_2 { + cpu-supply = <&buck2>; +}; + +&A53_3 { + cpu-supply = <&buck2>; +}; + +&eqos { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eqos>; + phy-connection-type = "rgmii-id"; + phy-handle = <ðphy0>; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { /* RTL8211E */ + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + reset-gpios = <&gpio4 18 GPIO_ACTIVE_LOW>; + reset-assert-us = <20>; + reset-deassert-us = <200000>; + }; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic@25 { + compatible = "nxp,pca9450c"; + reg = <0x25>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio1>; + interrupts = <3 IRQ_TYPE_EDGE_RISING>; + + regulators { + buck1: BUCK1 { + regulator-name = "BUCK1"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <2187500>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + }; + + buck2: BUCK2 { + regulator-name = "BUCK2"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <2187500>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + nxp,dvs-run-voltage = <950000>; + nxp,dvs-standby-voltage = <850000>; + }; + + buck4: BUCK4{ + regulator-name = "BUCK4"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + regulator-always-on; + }; + + buck5: BUCK5{ + regulator-name = "BUCK5"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + regulator-always-on; + }; + + buck6: BUCK6 { + regulator-name = "BUCK6"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1: LDO1 { + regulator-name = "LDO1"; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2: LDO2 { + regulator-name = "LDO2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3: LDO3 { + regulator-name = "LDO3"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4: LDO4 { + regulator-name = "LDO4"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo5: LDO5 { + regulator-name = "LDO5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + +&i2c4 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; + + rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "xin32k"; + interrupt-parent = <&gpio2>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc_int>; + }; +}; + +&i2c6 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c6>; + status = "okay"; +}; + +&snvs_pwrkey { + status = "okay"; +}; + +&uart2 { + /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +/* SD Card */ +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_usdhc2_vmmc>; + bus-width = <4>; + status = "okay"; +}; + +/* eMMC */ +&usdhc3 { + assigned-clocks = <&clk IMX8MP_CLK_USDHC3>; + assigned-clock-rates = <400000000>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_eqos: eqosgrp { + fsl,pins = < + MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x3 + MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x3 + MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x91 + MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x91 + MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x91 + MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x91 + MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x91 + MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x91 + MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x1f + MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x1f + MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x1f + MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x1f + MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x1f + MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x1f + MX8MP_IOMUXC_SAI1_RXFS__ENET1_1588_EVENT0_IN 0x1f + MX8MP_IOMUXC_SAI1_RXC__ENET1_1588_EVENT0_OUT 0x1f + MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18 0x19 + >; + }; + + pinctrl_fec: fecgrp { + fsl,pins = < + MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x3 + MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x3 + MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x91 + MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x91 + MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x91 + MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x91 + MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x91 + MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x91 + MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x1f + MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x1f + MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x1f + MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x1f + MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x1f + MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x1f + MX8MP_IOMUXC_SAI1_RXD1__ENET1_1588_EVENT1_OUT 0x1f + MX8MP_IOMUXC_SAI1_RXD0__ENET1_1588_EVENT1_IN 0x1f + MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19 0x19 + >; + }; + + pinctrl_gpio_led: gpioledgrp { + fsl,pins = < + MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16 0x19 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c2 + MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c2 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c2 + MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001c2 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c2 + MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400001c2 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL 0x400001c3 + MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA 0x400001c3 + >; + }; + + pinctrl_i2c6: i2c6grp { + fsl,pins = < + MX8MP_IOMUXC_SAI5_RXFS__I2C6_SCL 0x400001c3 + MX8MP_IOMUXC_SAI5_RXC__I2C6_SDA 0x400001c3 + >; + }; + + pinctrl_pmic: pmicirqgrp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x41 + >; + }; + + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { + fsl,pins = < + MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x41 + >; + }; + + pinctrl_rtc_int: rtcintgrp { + fsl,pins = < + MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11 0x140 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x14f + MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x14f + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX 0x49 + MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX 0x49 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX 0x49 + MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX 0x49 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c4 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d0 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d0 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d0 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d0 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d0 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d0 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d0 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d0 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d0 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x190 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x194 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d6 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d6 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d6 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d6 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d6 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d6 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d6 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d6 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x196 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0xc6 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi index 6e1192e751f8..9cdd4234c4ca 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi @@ -239,7 +239,6 @@ pinctrl-0 = <&pinctrl_pmic>; interrupt-parent = <&gpio1>; interrupts = <3 IRQ_TYPE_LEVEL_LOW>; - sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; /* * i.MX 8M Plus Data Sheet for Consumer Products @@ -248,7 +247,6 @@ */ regulators { buck1: BUCK1 { /* VDD_SOC (dual-phase with BUCK3) */ - regulator-compatible = "BUCK1"; regulator-min-microvolt = <850000>; regulator-max-microvolt = <1000000>; regulator-ramp-delay = <3125>; @@ -257,7 +255,6 @@ }; buck2: BUCK2 { /* VDD_ARM */ - regulator-compatible = "BUCK2"; regulator-min-microvolt = <850000>; regulator-max-microvolt = <1000000>; regulator-ramp-delay = <3125>; @@ -266,7 +263,6 @@ }; buck4: BUCK4 { /* VDD_3V3 */ - regulator-compatible = "BUCK4"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; @@ -274,7 +270,6 @@ }; buck5: BUCK5 { /* VDD_1V8 */ - regulator-compatible = "BUCK5"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; @@ -282,7 +277,6 @@ }; buck6: BUCK6 { /* NVCC_DRAM_1V1 */ - regulator-compatible = "BUCK6"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1100000>; regulator-always-on; @@ -290,7 +284,6 @@ }; ldo1: LDO1 { /* NVCC_SNVS_1V8 */ - regulator-compatible = "LDO1"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; @@ -298,7 +291,6 @@ }; ldo3: LDO3 { /* VDDA_1V8 */ - regulator-compatible = "LDO3"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; @@ -306,13 +298,11 @@ }; ldo4: LDO4 { /* PMIC_LDO4 */ - regulator-compatible = "LDO4"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; ldo5: LDO5 { /* NVCC_SD2 */ - regulator-compatible = "LDO5"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; }; @@ -429,14 +419,15 @@ status = "okay"; /* - * PLL3 at 320 MHz supplies UART2 root with 64 MHz clock, - * which with 16x oversampling yields 4 Mbdps baud base, + * PLL1 at 80 MHz supplies UART2 root with 80 MHz clock, + * which with 16x oversampling yields 5 Mbdps baud base, + * which can be well divided by 5/4 to achieve 4 Mbdps, * which is exactly the maximum rate supported by muRata * 2AE bluetooth UART. */ - assigned-clocks = <&clk IMX8MP_SYS_PLL3>, <&clk IMX8MP_CLK_UART2>; - assigned-clock-parents = <0>, <&clk IMX8MP_SYS_PLL3_OUT>; - assigned-clock-rates = <320000000>, <64000000>; + assigned-clocks = <&clk IMX8MP_CLK_UART2>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>; + assigned-clock-rates = <80000000>; bluetooth { pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts index d4c7ca16abd0..7816853162b3 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts @@ -36,8 +36,8 @@ pcie0_refclk: pcie0-refclk { compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <100000000>; + #clock-cells = <0>; + clock-frequency = <100000000>; }; reg_can1_stby: regulator-can1-stby { @@ -400,13 +400,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie0>; reset-gpio = <&gpio2 7 GPIO_ACTIVE_LOW>; - clocks = <&clk IMX8MP_CLK_HSIO_ROOT>, - <&clk IMX8MP_CLK_PCIE_ROOT>, - <&clk IMX8MP_CLK_HSIO_AXI>; - clock-names = "pcie", "pcie_aux", "pcie_bus"; - assigned-clocks = <&clk IMX8MP_CLK_PCIE_AUX>; - assigned-clock-rates = <10000000>; - assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_50M>; vpcie-supply = <®_pcie0>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi index 79b290a002c1..ecc4bce6db97 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi @@ -99,7 +99,6 @@ regulators { buck1: BUCK1 { - regulator-compatible = "BUCK1"; regulator-min-microvolt = <600000>; regulator-max-microvolt = <2187500>; regulator-boot-on; @@ -108,7 +107,6 @@ }; buck2: BUCK2 { - regulator-compatible = "BUCK2"; regulator-min-microvolt = <600000>; regulator-max-microvolt = <2187500>; regulator-boot-on; @@ -119,7 +117,6 @@ }; buck4: BUCK4 { - regulator-compatible = "BUCK4"; regulator-min-microvolt = <600000>; regulator-max-microvolt = <3400000>; regulator-boot-on; @@ -127,7 +124,6 @@ }; buck5: BUCK5 { - regulator-compatible = "BUCK5"; regulator-min-microvolt = <600000>; regulator-max-microvolt = <3400000>; regulator-boot-on; @@ -135,7 +131,6 @@ }; buck6: BUCK6 { - regulator-compatible = "BUCK6"; regulator-min-microvolt = <600000>; regulator-max-microvolt = <3400000>; regulator-boot-on; @@ -143,7 +138,6 @@ }; ldo1: LDO1 { - regulator-compatible = "LDO1"; regulator-min-microvolt = <1600000>; regulator-max-microvolt = <3300000>; regulator-boot-on; @@ -151,7 +145,6 @@ }; ldo2: LDO2 { - regulator-compatible = "LDO2"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <1150000>; regulator-boot-on; @@ -159,7 +152,6 @@ }; ldo3: LDO3 { - regulator-compatible = "LDO3"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <3300000>; regulator-boot-on; @@ -167,13 +159,11 @@ }; ldo4: LDO4 { - regulator-compatible = "LDO4"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <3300000>; }; ldo5: LDO5 { - regulator-compatible = "LDO5"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-boot-on; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds.dtso b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds.dtso new file mode 100644 index 000000000000..ea44d605342b --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds.dtso @@ -0,0 +1,61 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright (c) 2022 TQ-Systems GmbH <linux@ew.tq-group.com>, + * D-82229 Seefeld, Germany. + * Author: Alexander Stein + */ + +/dts-v1/; +/plugin/; + +&{/} { + compatible = "tq,imx8mp-tqma8mpql-mba8mpxl", "tq,imx8mp-tqma8mpql", "fsl,imx8mp"; +}; + +&backlight_lvds { + status = "okay"; +}; + +&display { + compatible = "tianma,tm070jvhg33"; + status = "okay"; + + panel-timing { + clock-frequency = <74250000>; + hactive = <1280>; + vactive = <800>; + hfront-porch = <64>; + hback-porch = <5>; + hsync-len = <1>; + vfront-porch = <40>; + vback-porch = <2>; + vsync-len = <1>; + de-active = <1>; + }; + + port { + panel_in_lvds0: endpoint { + remote-endpoint = <&ldb_lvds_ch0>; + }; + }; +}; + +&lcdif2 { + status = "okay"; +}; + +&lvds_bridge { + status = "okay"; + + ports { + port@1 { + ldb_lvds_ch0: endpoint { + remote-endpoint = <&panel_in_lvds0>; + }; + }; + }; +}; + +&pwm2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts index 6357f3d96ccd..3fa6cca9a043 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts @@ -447,9 +447,8 @@ sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; - /* NXP SE97BTP with temperature sensor + eeprom */ - se97_1c: temperature-sensor-eeprom@1c { - compatible = "nxp,se97", "jedec,jc-42.4-temp"; + se97_1c: temperature-sensor@1c { + compatible = "nxp,se97b", "jedec,jc-42.4-temp"; reg = <0x1c>; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi index 7bd680a926ce..ebc29a950ba9 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi @@ -63,9 +63,8 @@ sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; - /* NXP SE97BTP with temperature sensor + eeprom */ - se97: temperature-sensor-eeprom@1b { - compatible = "nxp,se97", "jedec,jc-42.4-temp"; + se97: temperature-sensor@1b { + compatible = "nxp,se97b", "jedec,jc-42.4-temp"; reg = <0x1b>; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts index ceeca4966fc5..eb51d648359b 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts @@ -593,13 +593,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie0>; reset-gpio = <&gpio2 17 GPIO_ACTIVE_LOW>; - clocks = <&clk IMX8MP_CLK_HSIO_ROOT>, - <&clk IMX8MP_CLK_PCIE_ROOT>, - <&clk IMX8MP_CLK_HSIO_AXI>; - clock-names = "pcie", "pcie_aux", "pcie_bus"; - assigned-clocks = <&clk IMX8MP_CLK_PCIE_AUX>; - assigned-clock-rates = <10000000>; - assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_50M>; status = "okay"; }; @@ -623,7 +616,6 @@ pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>; cts-gpios = <&gpio3 21 GPIO_ACTIVE_LOW>; rts-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>; - uart-has-rtscts; status = "okay"; bluetooth { diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi index cefabe65b252..361426c0da0a 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi @@ -3,8 +3,6 @@ * Copyright 2022 Toradex */ -#include "imx8mp-verdin-dahlia.dtsi" - / { /* TODO: Audio Codec */ @@ -21,16 +19,99 @@ }; }; +&backlight { + power-supply = <®_3p3v>; +}; + +/* Verdin SPI_1 */ +&ecspi1 { + status = "okay"; +}; + +/* EEPROM on display adapter boards */ +&eeprom_display_adapter { + status = "okay"; +}; + +/* EEPROM on Verdin Development board */ +&eeprom_carrier_board { + status = "okay"; +}; + +&eqos { + status = "okay"; +}; + &fec { phy-supply = <®_eth2phy>; status = "okay"; }; +&flexcan1 { + status = "okay"; +}; + +&flexcan2 { + status = "okay"; +}; + +/* Verdin QSPI_1 */ +&flexspi { + status = "okay"; +}; + &gpio_expander_21 { status = "okay"; vcc-supply = <®_1p8v>; }; +/* Current measurement into module VCC */ +&hwmon { + status = "okay"; +}; + +&hwmon_temp { + vs-supply = <®_1p8v>; + status = "okay"; +}; + +/* Verdin I2C_2_DSI */ +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +/* Verdin I2C_1 */ +&i2c4 { + status = "okay"; + + /* TODO: Audio Codec */ +}; + +/* TODO: Verdin PCIE_1 */ + +/* Verdin PWM_1 */ +&pwm1 { + status = "okay"; +}; + +/* Verdin PWM_2 */ +&pwm2 { + status = "okay"; +}; + +/* Verdin PWM_3_DSI */ +&pwm3 { + status = "okay"; +}; + +®_usdhc2_vmmc { + vin-supply = <®_3p3v>; +}; + /* TODO: Verdin I2C_1 with Audio Codec */ /* Verdin UART_1, connector X50 through RS485 transceiver */ @@ -38,9 +119,40 @@ linux,rs485-enabled-at-boot-time; rs485-rts-active-low; rs485-rx-during-tx; + status = "okay"; +}; + +/* Verdin UART_2 */ +&uart2 { + status = "okay"; +}; + +/* Verdin UART_3, used as the Linux Console */ +&uart3 { + status = "okay"; +}; + +/* Verdin USB_1 */ +&usb3_0 { + status = "okay"; +}; + +&usb3_phy0 { + status = "okay"; +}; + +/* Verdin USB_2 */ +&usb3_1 { + fsl,permanently-attached; + status = "okay"; +}; + +&usb3_phy1 { + status = "okay"; }; /* Limit frequency on dev board due to long traces and bad signal integrity */ &usdhc2 { max-frequency = <100000000>; + status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-yavia.dts b/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-yavia.dts new file mode 100644 index 000000000000..b28477df1ec6 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-yavia.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2023 Toradex + */ + +/dts-v1/; + +#include "imx8mp-verdin.dtsi" +#include "imx8mp-verdin-nonwifi.dtsi" +#include "imx8mp-verdin-yavia.dtsi" + +/ { + model = "Toradex Verdin iMX8M Plus on Yavia Board"; + compatible = "toradex,verdin-imx8mp-nonwifi-yavia", + "toradex,verdin-imx8mp-nonwifi", + "toradex,verdin-imx8mp", + "fsl,imx8mp"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-yavia.dts b/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-yavia.dts new file mode 100644 index 000000000000..100bef12089c --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-yavia.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2023 Toradex + */ + +/dts-v1/; + +#include "imx8mp-verdin.dtsi" +#include "imx8mp-verdin-wifi.dtsi" +#include "imx8mp-verdin-yavia.dtsi" + +/ { + model = "Toradex Verdin iMX8M Plus WB on Yavia Board"; + compatible = "toradex,verdin-imx8mp-wifi-yavia", + "toradex,verdin-imx8mp-wifi", + "toradex,verdin-imx8mp", + "fsl,imx8mp"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-yavia.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-yavia.dtsi new file mode 100644 index 000000000000..bd7b31cc3760 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-yavia.dtsi @@ -0,0 +1,213 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2023 Toradex + */ + +#include <dt-bindings/leds/common.h> + +/ { + /* Carrier Board Supply +V1.8 */ + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "+V1.8_SW"; + }; + + /* Carrier Board Supply +V3.3 */ + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "+V3.3_SW"; + }; + + leds { + compatible = "gpio-leds"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds_yavia>; + + /* SODIMM 52 - LD1_RED */ + led-0 { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_DEBUG; + function-enumerator = <1>; + gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>; + }; + /* SODIMM 54 - LD1_GREEN */ + led-1 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_DEBUG; + function-enumerator = <1>; + gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>; + }; + /* SODIMM 56 - LD1_BLUE */ + led-2 { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_DEBUG; + function-enumerator = <1>; + gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>; + }; + /* SODIMM 58 - LD2_RED */ + led-3 { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_DEBUG; + function-enumerator = <2>; + gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>; + }; + /* SODIMM 60 - LD2_GREEN */ + led-4 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_DEBUG; + function-enumerator = <2>; + gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>; + }; + /* SODIMM 62 - LD2_BLUE */ + led-5 { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_DEBUG; + function-enumerator = <2>; + gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&backlight { + power-supply = <®_3p3v>; +}; + +/* Verdin SPI_1 */ +&ecspi1 { + status = "okay"; +}; + +/* EEPROM on display adapter boards */ +&eeprom_display_adapter { + status = "okay"; +}; + +/* EEPROM on Verdin yavia board */ +&eeprom_carrier_board { + status = "okay"; +}; + +&eqos { + status = "okay"; +}; + +&flexcan1 { + status = "okay"; +}; + +&hwmon_temp { + status = "okay"; +}; + +/* Verdin I2C_2_DSI */ +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +/* Verdin PCIE_1 */ +&pcie { + status = "okay"; +}; + +&pcie_phy{ + status = "okay"; +}; + +/* Verdin PWM_1 */ +&pwm1 { + status = "okay"; +}; + +/* Verdin PWM_2 */ +&pwm2 { + status = "okay"; +}; + +/* Verdin PWM_3_DSI */ +&pwm3 { + status = "okay"; +}; + +®_usdhc2_vmmc { + vin-supply = <®_3p3v>; +}; + +/* Verdin UART_1 */ +&uart1 { + status = "okay"; +}; + +/* Verdin UART_2 */ +&uart2 { + status = "okay"; +}; + +/* Verdin UART_3, used as the Linux Console */ +&uart3 { + status = "okay"; +}; + +/* Verdin USB_1 */ +&usb3_phy0 { + status = "okay"; +}; + +&usb3_0 { + status = "okay"; +}; + +&usb_dwc3_0 { + status = "okay"; +}; + +/* Verdin USB_2 */ +&usb3_phy1 { + status = "okay"; +}; + +&usb3_1 { + status = "okay"; +}; + +&usb_dwc3_1 { + disable-over-current; + status = "okay"; +}; + +/* Verdin SD_1 */ +&usdhc2 { + status = "okay"; +}; + +&iomuxc { + pinctrl_leds_yavia: ledsyaviagrp { + fsl,pins = < + MX8MP_IOMUXC_NAND_ALE__GPIO3_IO00 0x106 /* SODIMM 52 */ + MX8MP_IOMUXC_NAND_CE0_B__GPIO3_IO01 0x106 /* SODIMM 54 */ + MX8MP_IOMUXC_NAND_DATA00__GPIO3_IO06 0x106 /* SODIMM 56 */ + MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07 0x106 /* SODIMM 58 */ + MX8MP_IOMUXC_NAND_DATA02__GPIO3_IO08 0x106 /* SODIMM 60 */ + MX8MP_IOMUXC_NAND_DATA03__GPIO3_IO09 0x106 /* SODIMM 62 */ + >; + }; + + pinctrl_gpios_ext_yavia: gpiosextyaviagrp { + fsl,pins = < + MX8MP_IOMUXC_NAND_CE1_B__GPIO3_IO02 0x106 /* SODIMM 64 */ + MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14 0x106 /* SODIMM 66 */ + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi index 6a1890a4b5d8..0dd6180a8e39 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi @@ -50,7 +50,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_keys>; - button-wakeup { + key-wakeup { debounce-interval = <10>; /* Verdin CTRL_WAKE1_MICO# (SODIMM 252) */ gpios = <&gpio4 0 GPIO_ACTIVE_LOW>; @@ -453,7 +453,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pmic>; reg = <0x25>; - sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; /* * The bootloader is expected to switch on LDO4 for the on-module +V3.3_ADC and the diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index 7a6e6221f421..a19224fe1a6a 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -380,6 +380,8 @@ compatible = "fsl,imx8mp-tmu"; reg = <0x30260000 0x10000>; clocks = <&clk IMX8MP_CLK_TSENSOR_ROOT>; + nvmem-cells = <&tmu_calib>; + nvmem-cell-names = "calib"; #thermal-sensor-cells = <1>; }; @@ -412,7 +414,7 @@ reg = <0x30330000 0x10000>; }; - gpr: iomuxc-gpr@30340000 { + gpr: syscon@30340000 { compatible = "fsl,imx8mp-iomuxc-gpr", "syscon"; reg = <0x30340000 0x10000>; }; @@ -425,21 +427,38 @@ #address-cells = <1>; #size-cells = <1>; - imx8mp_uid: unique-id@420 { + /* + * The register address below maps to the MX8M + * Fusemap Description Table entries this way. + * Assuming + * reg = <ADDR SIZE>; + * then + * Fuse Address = (ADDR * 4) + 0x400 + * Note that if SIZE is greater than 4, then + * each subsequent fuse is located at offset + * +0x10 in Fusemap Description Table (e.g. + * reg = <0x8 0x8> describes fuses 0x420 and + * 0x430). + */ + imx8mp_uid: unique-id@8 { /* 0x420-0x430 */ reg = <0x8 0x8>; }; - cpu_speed_grade: speed-grade@10 { + cpu_speed_grade: speed-grade@10 { /* 0x440 */ reg = <0x10 4>; }; - eth_mac1: mac-address@90 { + eth_mac1: mac-address@90 { /* 0x640 */ reg = <0x90 6>; }; - eth_mac2: mac-address@96 { + eth_mac2: mac-address@96 { /* 0x658 */ reg = <0x96 6>; }; + + tmu_calib: calib@264 { /* 0xd90-0xdc0 */ + reg = <0x264 0x10>; + }; }; anatop: clock-controller@30360000 { @@ -524,6 +543,7 @@ compatible = "fsl,imx8mp-gpc"; reg = <0x303a0000 0x1000>; interrupt-parent = <&gic>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <3>; @@ -590,7 +610,7 @@ reg = <IMX8MP_POWER_DOMAIN_MIPI_PHY2>; }; - pgc_hsiomix: power-domains@17 { + pgc_hsiomix: power-domain@17 { #power-domain-cells = <0>; reg = <IMX8MP_POWER_DOMAIN_HSIOMIX>; clocks = <&clk IMX8MP_CLK_HSIO_AXI>, @@ -711,121 +731,129 @@ #size-cells = <1>; ranges; - ecspi1: spi@30820000 { + spba-bus@30800000 { + compatible = "fsl,spba-bus", "simple-bus"; + reg = <0x30800000 0x100000>; #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx8mp-ecspi", "fsl,imx6ul-ecspi"; - reg = <0x30820000 0x10000>; - interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MP_CLK_ECSPI1_ROOT>, - <&clk IMX8MP_CLK_ECSPI1_ROOT>; - clock-names = "ipg", "per"; - assigned-clock-rates = <80000000>; - assigned-clocks = <&clk IMX8MP_CLK_ECSPI1>; - assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>; - dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + #size-cells = <1>; + ranges; - ecspi2: spi@30830000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx8mp-ecspi", "fsl,imx6ul-ecspi"; - reg = <0x30830000 0x10000>; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MP_CLK_ECSPI2_ROOT>, - <&clk IMX8MP_CLK_ECSPI2_ROOT>; - clock-names = "ipg", "per"; - assigned-clock-rates = <80000000>; - assigned-clocks = <&clk IMX8MP_CLK_ECSPI2>; - assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>; - dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + ecspi1: spi@30820000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8mp-ecspi", "fsl,imx6ul-ecspi"; + reg = <0x30820000 0x10000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_ECSPI1_ROOT>, + <&clk IMX8MP_CLK_ECSPI1_ROOT>; + clock-names = "ipg", "per"; + assigned-clock-rates = <80000000>; + assigned-clocks = <&clk IMX8MP_CLK_ECSPI1>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>; + dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>; + dma-names = "rx", "tx"; + status = "disabled"; + }; - ecspi3: spi@30840000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx8mp-ecspi", "fsl,imx6ul-ecspi"; - reg = <0x30840000 0x10000>; - interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MP_CLK_ECSPI3_ROOT>, - <&clk IMX8MP_CLK_ECSPI3_ROOT>; - clock-names = "ipg", "per"; - assigned-clock-rates = <80000000>; - assigned-clocks = <&clk IMX8MP_CLK_ECSPI3>; - assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>; - dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + ecspi2: spi@30830000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8mp-ecspi", "fsl,imx6ul-ecspi"; + reg = <0x30830000 0x10000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_ECSPI2_ROOT>, + <&clk IMX8MP_CLK_ECSPI2_ROOT>; + clock-names = "ipg", "per"; + assigned-clock-rates = <80000000>; + assigned-clocks = <&clk IMX8MP_CLK_ECSPI2>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>; + dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>; + dma-names = "rx", "tx"; + status = "disabled"; + }; - uart1: serial@30860000 { - compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart"; - reg = <0x30860000 0x10000>; - interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MP_CLK_UART1_ROOT>, - <&clk IMX8MP_CLK_UART1_ROOT>; - clock-names = "ipg", "per"; - dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + ecspi3: spi@30840000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8mp-ecspi", "fsl,imx6ul-ecspi"; + reg = <0x30840000 0x10000>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_ECSPI3_ROOT>, + <&clk IMX8MP_CLK_ECSPI3_ROOT>; + clock-names = "ipg", "per"; + assigned-clock-rates = <80000000>; + assigned-clocks = <&clk IMX8MP_CLK_ECSPI3>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>; + dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>; + dma-names = "rx", "tx"; + status = "disabled"; + }; - uart3: serial@30880000 { - compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart"; - reg = <0x30880000 0x10000>; - interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MP_CLK_UART3_ROOT>, - <&clk IMX8MP_CLK_UART3_ROOT>; - clock-names = "ipg", "per"; - dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + uart1: serial@30860000 { + compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart"; + reg = <0x30860000 0x10000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_UART1_ROOT>, + <&clk IMX8MP_CLK_UART1_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; - uart2: serial@30890000 { - compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart"; - reg = <0x30890000 0x10000>; - interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MP_CLK_UART2_ROOT>, - <&clk IMX8MP_CLK_UART2_ROOT>; - clock-names = "ipg", "per"; - dmas = <&sdma1 24 4 0>, <&sdma1 25 4 0>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + uart3: serial@30880000 { + compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart"; + reg = <0x30880000 0x10000>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_UART3_ROOT>, + <&clk IMX8MP_CLK_UART3_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; - flexcan1: can@308c0000 { - compatible = "fsl,imx8mp-flexcan"; - reg = <0x308c0000 0x10000>; - interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MP_CLK_IPG_ROOT>, - <&clk IMX8MP_CLK_CAN1_ROOT>; - clock-names = "ipg", "per"; - assigned-clocks = <&clk IMX8MP_CLK_CAN1>; - assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_40M>; - assigned-clock-rates = <40000000>; - fsl,clk-source = /bits/ 8 <0>; - fsl,stop-mode = <&gpr 0x10 4>; - status = "disabled"; - }; + uart2: serial@30890000 { + compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart"; + reg = <0x30890000 0x10000>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_UART2_ROOT>, + <&clk IMX8MP_CLK_UART2_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 24 4 0>, <&sdma1 25 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; - flexcan2: can@308d0000 { - compatible = "fsl,imx8mp-flexcan"; - reg = <0x308d0000 0x10000>; - interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MP_CLK_IPG_ROOT>, - <&clk IMX8MP_CLK_CAN2_ROOT>; - clock-names = "ipg", "per"; - assigned-clocks = <&clk IMX8MP_CLK_CAN2>; - assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_40M>; - assigned-clock-rates = <40000000>; - fsl,clk-source = /bits/ 8 <0>; - fsl,stop-mode = <&gpr 0x10 5>; - status = "disabled"; + flexcan1: can@308c0000 { + compatible = "fsl,imx8mp-flexcan"; + reg = <0x308c0000 0x10000>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_IPG_ROOT>, + <&clk IMX8MP_CLK_CAN1_ROOT>; + clock-names = "ipg", "per"; + assigned-clocks = <&clk IMX8MP_CLK_CAN1>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_40M>; + assigned-clock-rates = <40000000>; + fsl,clk-source = /bits/ 8 <0>; + fsl,stop-mode = <&gpr 0x10 4>; + status = "disabled"; + }; + + flexcan2: can@308d0000 { + compatible = "fsl,imx8mp-flexcan"; + reg = <0x308d0000 0x10000>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_IPG_ROOT>, + <&clk IMX8MP_CLK_CAN2_ROOT>; + clock-names = "ipg", "per"; + assigned-clocks = <&clk IMX8MP_CLK_CAN2>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_40M>; + assigned-clock-rates = <40000000>; + fsl,clk-source = /bits/ 8 <0>; + fsl,stop-mode = <&gpr 0x10 5>; + status = "disabled"; + }; }; crypto: crypto@30900000 { @@ -1098,10 +1126,35 @@ #size-cells = <1>; ranges; + lcdif2: display-controller@32e90000 { + compatible = "fsl,imx8mp-lcdif"; + reg = <0x32e90000 0x238>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_MEDIA_DISP2_PIX_ROOT>, + <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>, + <&clk IMX8MP_CLK_MEDIA_APB_ROOT>; + clock-names = "pix", "axi", "disp_axi"; + assigned-clocks = <&clk IMX8MP_CLK_MEDIA_DISP2_PIX>, + <&clk IMX8MP_VIDEO_PLL1>; + assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>, + <&clk IMX8MP_VIDEO_PLL1_REF_SEL>; + assigned-clock-rates = <0>, <1039500000>; + power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_LCDIF_2>; + status = "disabled"; + + port { + lcdif2_to_ldb: endpoint { + remote-endpoint = <&ldb_from_lcdif2>; + }; + }; + }; + media_blk_ctrl: blk-ctrl@32ec0000 { compatible = "fsl,imx8mp-media-blk-ctrl", - "syscon"; + "simple-bus", "syscon"; reg = <0x32ec0000 0x10000>; + #address-cells = <1>; + #size-cells = <1>; power-domains = <&pgc_mediamix>, <&pgc_mipi_phy1>, <&pgc_mipi_phy1>, @@ -1146,6 +1199,44 @@ assigned-clock-rates = <500000000>, <200000000>; #power-domain-cells = <1>; + + lvds_bridge: bridge@5c { + compatible = "fsl,imx8mp-ldb"; + clocks = <&clk IMX8MP_CLK_MEDIA_LDB>; + clock-names = "ldb"; + reg = <0x5c 0x4>, <0x128 0x4>; + reg-names = "ldb", "lvds"; + assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>; + assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + ldb_from_lcdif2: endpoint { + remote-endpoint = <&lcdif2_to_ldb>; + }; + }; + + port@1 { + reg = <1>; + + ldb_lvds_ch0: endpoint { + }; + }; + + port@2 { + reg = <2>; + + ldb_lvds_ch1: endpoint { + }; + }; + }; + }; }; pcie_phy: pcie-phy@32f00000 { @@ -1176,6 +1267,7 @@ <&noc IMX8MP_ICM_PCIE &noc IMX8MP_ICN_HSIO>; interconnect-names = "noc-pcie", "usb1", "usb2", "pcie"; #power-domain-cells = <1>; + #clock-cells = <0>; }; }; @@ -1183,6 +1275,13 @@ compatible = "fsl,imx8mp-pcie"; reg = <0x33800000 0x400000>, <0x1ff00000 0x80000>; reg-names = "dbi", "config"; + clocks = <&clk IMX8MP_CLK_HSIO_ROOT>, + <&clk IMX8MP_CLK_HSIO_AXI>, + <&clk IMX8MP_CLK_PCIE_ROOT>; + clock-names = "pcie", "pcie_bus", "pcie_aux"; + assigned-clocks = <&clk IMX8MP_CLK_PCIE_AUX>; + assigned-clock-rates = <10000000>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_50M>; #address-cells = <3>; #size-cells = <2>; device_type = "pci"; @@ -1241,6 +1340,28 @@ power-domains = <&pgc_gpu2d>; }; + vpu_g1: video-codec@38300000 { + compatible = "nxp,imx8mm-vpu-g1"; + reg = <0x38300000 0x10000>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_VPU_G1_ROOT>; + assigned-clocks = <&clk IMX8MP_CLK_VPU_G1>; + assigned-clock-parents = <&clk IMX8MP_VPU_PLL_OUT>; + assigned-clock-rates = <600000000>; + power-domains = <&vpumix_blk_ctrl IMX8MP_VPUBLK_PD_G1>; + }; + + vpu_g2: video-codec@38310000 { + compatible = "nxp,imx8mq-vpu-g2"; + reg = <0x38310000 0x10000>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_VPU_G2_ROOT>; + assigned-clocks = <&clk IMX8MP_CLK_VPU_G2>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>; + assigned-clock-rates = <500000000>; + power-domains = <&vpumix_blk_ctrl IMX8MP_VPUBLK_PD_G2>; + }; + vpumix_blk_ctrl: blk-ctrl@38330000 { compatible = "fsl,imx8mp-vpu-blk-ctrl", "syscon"; reg = <0x38330000 0x100>; @@ -1252,6 +1373,9 @@ <&clk IMX8MP_CLK_VPU_G2_ROOT>, <&clk IMX8MP_CLK_VPU_VC8KE_ROOT>; clock-names = "g1", "g2", "vc8000e"; + assigned-clocks = <&clk IMX8MP_CLK_VPU_BUS>, <&clk IMX8MP_VPU_PLL>; + assigned-clock-parents = <&clk IMX8MP_VPU_PLL_OUT>; + assigned-clock-rates = <600000000>, <600000000>; interconnects = <&noc IMX8MP_ICM_VPU_G1 &noc IMX8MP_ICN_VIDEO>, <&noc IMX8MP_ICM_VPU_G2 &noc IMX8MP_ICN_VIDEO>, <&noc IMX8MP_ICM_VPU_H1 &noc IMX8MP_ICN_VIDEO>; @@ -1297,7 +1421,7 @@ reg = <0x32f10100 0x8>, <0x381f0000 0x20>; clocks = <&clk IMX8MP_CLK_HSIO_ROOT>, - <&clk IMX8MP_CLK_USB_ROOT>; + <&clk IMX8MP_CLK_USB_SUSP>; clock-names = "hsio", "suspend"; interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB>; @@ -1310,9 +1434,9 @@ usb_dwc3_0: usb@38100000 { compatible = "snps,dwc3"; reg = <0x38100000 0x10000>; - clocks = <&clk IMX8MP_CLK_HSIO_AXI>, + clocks = <&clk IMX8MP_CLK_USB_ROOT>, <&clk IMX8MP_CLK_USB_CORE_REF>, - <&clk IMX8MP_CLK_USB_ROOT>; + <&clk IMX8MP_CLK_USB_SUSP>; clock-names = "bus_early", "ref", "suspend"; interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; phys = <&usb3_phy0>, <&usb3_phy0>; @@ -1339,7 +1463,7 @@ reg = <0x32f10108 0x8>, <0x382f0000 0x20>; clocks = <&clk IMX8MP_CLK_HSIO_ROOT>, - <&clk IMX8MP_CLK_USB_ROOT>; + <&clk IMX8MP_CLK_USB_SUSP>; clock-names = "hsio", "suspend"; interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB>; @@ -1352,9 +1476,9 @@ usb_dwc3_1: usb@38200000 { compatible = "snps,dwc3"; reg = <0x38200000 0x10000>; - clocks = <&clk IMX8MP_CLK_HSIO_AXI>, + clocks = <&clk IMX8MP_CLK_USB_ROOT>, <&clk IMX8MP_CLK_USB_CORE_REF>, - <&clk IMX8MP_CLK_USB_ROOT>; + <&clk IMX8MP_CLK_USB_SUSP>; clock-names = "bus_early", "ref", "suspend"; interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; phys = <&usb3_phy1>, <&usb3_phy1>; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts index 78937910f403..7507548cdb16 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts @@ -356,10 +356,9 @@ pinctrl-0 = <&pinctrl_pcie0>; reset-gpio = <&gpio5 28 GPIO_ACTIVE_LOW>; clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>, - <&clk IMX8MQ_CLK_PCIE1_AUX>, + <&pcie0_refclk>, <&clk IMX8MQ_CLK_PCIE1_PHY>, - <&pcie0_refclk>; - clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus"; + <&clk IMX8MQ_CLK_PCIE1_AUX>; vph-supply = <&vgen5_reg>; status = "okay"; }; @@ -369,10 +368,9 @@ pinctrl-0 = <&pinctrl_pcie1>; reset-gpio = <&gpio5 12 GPIO_ACTIVE_LOW>; clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>, - <&clk IMX8MQ_CLK_PCIE2_AUX>, + <&pcie0_refclk>, <&clk IMX8MQ_CLK_PCIE2_PHY>, - <&pcie0_refclk>; - clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus"; + <&clk IMX8MQ_CLK_PCIE2_AUX>; vpcie-supply = <®_pcie1>; vph-supply = <&vgen5_reg>; status = "okay"; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts b/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts index a91c136797f6..6376417e918c 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts @@ -245,20 +245,18 @@ pinctrl-0 = <&pinctrl_pcie0>; reset-gpio = <&gpio1 9 GPIO_ACTIVE_LOW>; clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>, - <&clk IMX8MQ_CLK_PCIE1_AUX>, + <&pcie0_refclk>, <&clk IMX8MQ_CLK_PCIE1_PHY>, - <&pcie0_refclk>; - clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus"; + <&clk IMX8MQ_CLK_PCIE1_AUX>; status = "okay"; }; /* Intel Ethernet Controller I210/I211 */ &pcie1 { clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>, - <&clk IMX8MQ_CLK_PCIE2_AUX>, + <&pcie1_refclk>, <&clk IMX8MQ_CLK_PCIE2_PHY>, - <&pcie1_refclk>; - clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus"; + <&clk IMX8MQ_CLK_PCIE2_AUX>; fsl,max-link-speed = <1>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts index 4c8904fba1c1..7605802f294d 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts @@ -64,7 +64,7 @@ leds { compatible = "pwm-leds"; - led1 { + led-1 { function = LED_FUNCTION_STATUS; color = <LED_COLOR_ID_RED>; max-brightness = <248>; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi index ddf0e330dc7c..6895bcc12165 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi @@ -56,27 +56,27 @@ }; led-controller { - compatible = "pwm-leds"; + compatible = "pwm-leds-multicolor"; - led-0 { + multi-led { + color = <LED_COLOR_ID_RGB>; function = LED_FUNCTION_STATUS; - color = <LED_COLOR_ID_BLUE>; max-brightness = <248>; - pwms = <&pwm2 0 50000 0>; - }; - led-1 { - function = LED_FUNCTION_STATUS; - color = <LED_COLOR_ID_GREEN>; - max-brightness = <248>; - pwms = <&pwm4 0 50000 0>; - }; + led-0 { + color = <LED_COLOR_ID_BLUE>; + pwms = <&pwm2 0 50000 0>; + }; - led-2 { - function = LED_FUNCTION_STATUS; - color = <LED_COLOR_ID_RED>; - max-brightness = <248>; - pwms = <&pwm3 0 50000 0>; + led-1 { + color = <LED_COLOR_ID_GREEN>; + pwms = <&pwm4 0 50000 0>; + }; + + led-2 { + color = <LED_COLOR_ID_RED>; + pwms = <&pwm3 0 50000 0>; + }; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts b/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts index 055031bba8c4..200268660518 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts @@ -197,10 +197,9 @@ pinctrl-0 = <&pinctrl_pcie1>; reset-gpio = <&gpio3 23 GPIO_ACTIVE_LOW>; clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>, - <&clk IMX8MQ_CLK_PCIE2_AUX>, + <&pcie1_refclk>, <&clk IMX8MQ_CLK_PCIE2_PHY>, - <&pcie1_refclk>; - clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus"; + <&clk IMX8MQ_CLK_PCIE2_AUX>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts index 9dda2a1554c3..8614c18b5998 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts @@ -133,7 +133,7 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - i2cmux@70 { + i2c-mux@70 { compatible = "nxp,pca9546"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1_pca9546>; @@ -216,7 +216,7 @@ pinctrl-0 = <&pinctrl_i2c4>; status = "okay"; - pca9546: i2cmux@70 { + pca9546: i2c-mux@70 { compatible = "nxp,pca9546"; reg = <0x70>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts b/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts index 5d5aa6537225..6e6182709d22 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts @@ -339,7 +339,7 @@ bus-width = <4>; non-removable; no-sd; - no-emmc; + no-mmc; status = "okay"; brcmf: wifi@1 { @@ -359,7 +359,7 @@ cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; bus-width = <4>; no-sdio; - no-emmc; + no-mmc; disable-wp; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts index d7660eab68b9..344cfdaeb1d5 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts @@ -105,10 +105,9 @@ &pcie0 { reset-gpio = <&expander0 14 GPIO_ACTIVE_LOW>; clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>, - <&clk IMX8MQ_CLK_PCIE1_AUX>, + <&pcie0_refclk>, <&clk IMX8MQ_CLK_PCIE1_PHY>, - <&pcie0_refclk>; - clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus"; + <&clk IMX8MQ_CLK_PCIE1_AUX>; epdev_on-supply = <®_vcc_3v3>; hard-wired = <1>; status = "okay"; @@ -120,10 +119,9 @@ */ &pcie1 { clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>, - <&clk IMX8MQ_CLK_PCIE2_AUX>, + <&pcie1_refclk>, <&clk IMX8MQ_CLK_PCIE2_PHY>, - <&pcie1_refclk>; - clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus"; + <&clk IMX8MQ_CLK_PCIE2_AUX>; epdev_on-supply = <®_vcc_3v3>; hard-wired = <1>; status = "okay"; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi index 9a95e30fb42d..5ca6b2252546 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi @@ -194,8 +194,8 @@ }; }; - sensor0: temperature-sensor-eeprom@1b { - compatible = "nxp,se97", "jedec,jc-42.4-temp"; + sensor0: temperature-sensor@1b { + compatible = "nxp,se97b", "jedec,jc-42.4-temp"; reg = <0x1b>; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi index 4e05120c62d4..3a52679ecd68 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi @@ -490,7 +490,7 @@ pinctrl-0 = <&pinctrl_uart2>; status = "okay"; - rave-sp { + mcu { compatible = "zii,rave-sp-rdu2"; current-speed = <1000000>; #address-cells = <1>; @@ -551,10 +551,9 @@ pinctrl-0 = <&pinctrl_pcie0>; reset-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>; clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>, - <&clk IMX8MQ_CLK_PCIE1_AUX>, + <&pcie0_refclk>, <&clk IMX8MQ_CLK_PCIE1_PHY>, - <&pcie0_refclk>; - clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus"; + <&clk IMX8MQ_CLK_PCIE1_AUX>; vph-supply = <&vgen5_reg>; status = "okay"; }; @@ -564,10 +563,9 @@ pinctrl-0 = <&pinctrl_pcie1>; reset-gpio = <&gpio1 6 GPIO_ACTIVE_LOW>; clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>, - <&clk IMX8MQ_CLK_PCIE2_AUX>, + <&pcie1_refclk>, <&clk IMX8MQ_CLK_PCIE2_PHY>, - <&pcie1_refclk>; - clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus"; + <&clk IMX8MQ_CLK_PCIE2_AUX>; vph-supply = <&vgen5_reg>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index 7ce99c084e54..98fbba4c99a9 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -575,8 +575,7 @@ }; iomuxc_gpr: syscon@30340000 { - compatible = "fsl,imx8mq-iomuxc-gpr", "fsl,imx6q-iomuxc-gpr", - "syscon", "simple-mfd"; + compatible = "fsl,imx8mq-iomuxc-gpr", "syscon", "simple-mfd"; reg = <0x30340000 0x10000>; mux: mux-controller { @@ -593,15 +592,28 @@ #address-cells = <1>; #size-cells = <1>; - imx8mq_uid: soc-uid@410 { + /* + * The register address below maps to the MX8M + * Fusemap Description Table entries this way. + * Assuming + * reg = <ADDR SIZE>; + * then + * Fuse Address = (ADDR * 4) + 0x400 + * Note that if SIZE is greater than 4, then + * each subsequent fuse is located at offset + * +0x10 in Fusemap Description Table (e.g. + * reg = <0x4 0x8> describes fuses 0x410 and + * 0x420). + */ + imx8mq_uid: soc-uid@4 { /* 0x410-0x420 */ reg = <0x4 0x8>; }; - cpu_speed_grade: speed-grade@10 { + cpu_speed_grade: speed-grade@10 { /* 0x440 */ reg = <0x10 4>; }; - fec_mac_address: mac-address@90 { + fec_mac_address: mac-address@90 { /* 0x640 */ reg = <0x90 6>; }; }; @@ -1530,6 +1542,11 @@ <0 0 0 4 &gic GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; fsl,max-link-speed = <2>; linux,pci-domain = <0>; + clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>, + <&clk IMX8MQ_CLK_PCIE1_PHY>, + <&clk IMX8MQ_CLK_PCIE1_PHY>, + <&clk IMX8MQ_CLK_PCIE1_AUX>; + clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux"; power-domains = <&pgc_pcie>; resets = <&src IMX8MQ_RESET_PCIEPHY>, <&src IMX8MQ_RESET_PCIE_CTRL_APPS_EN>, @@ -1567,6 +1584,11 @@ <0 0 0 4 &gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; fsl,max-link-speed = <2>; linux,pci-domain = <1>; + clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>, + <&clk IMX8MQ_CLK_PCIE2_PHY>, + <&clk IMX8MQ_CLK_PCIE2_PHY>, + <&clk IMX8MQ_CLK_PCIE2_AUX>; + clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux"; power-domains = <&pgc_pcie>; resets = <&src IMX8MQ_RESET_PCIEPHY2>, <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_EN>, diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts index 07d8dd8160f6..afa883389456 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts +++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts @@ -61,7 +61,7 @@ pinctrl-0 = <&pinctrl_lpi2c1 &pinctrl_ioexp_rst>; status = "okay"; - i2c-switch@71 { + i2c-mux@71 { compatible = "nxp,pca9646", "nxp,pca9546"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts index 69786c326db0..c928b6824e41 100644 --- a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts @@ -15,6 +15,13 @@ stdout-path = &lpuart1; }; + reg_vref_1v8: regulator-adc-vref { + compatible = "regulator-fixed"; + regulator-name = "vref_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + reg_usdhc2_vmmc: regulator-usdhc2 { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -27,6 +34,11 @@ }; }; +&adc1 { + vref-supply = <®_vref_1v8>; + status = "okay"; +}; + &mu1 { status = "okay"; }; @@ -74,7 +86,7 @@ pinctrl_usdhc1: usdhc1grp { fsl,pins = < - MX93_PAD_SD1_CLK__USDHC1_CLK 0x17fe + MX93_PAD_SD1_CLK__USDHC1_CLK 0x15fe MX93_PAD_SD1_CMD__USDHC1_CMD 0x13fe MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x13fe MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x13fe @@ -84,7 +96,7 @@ MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x13fe MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x13fe MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x13fe - MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x17fe + MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x15fe >; }; @@ -102,7 +114,7 @@ pinctrl_usdhc2: usdhc2grp { fsl,pins = < - MX93_PAD_SD2_CLK__USDHC2_CLK 0x17fe + MX93_PAD_SD2_CLK__USDHC2_CLK 0x15fe MX93_PAD_SD2_CMD__USDHC2_CMD 0x13fe MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x13fe MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x13fe diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi index 5d79663b3b84..abb3fbe4ba22 100644 --- a/arch/arm64/boot/dts/freescale/imx93.dtsi +++ b/arch/arm64/boot/dts/freescale/imx93.dtsi @@ -223,6 +223,20 @@ status = "disabled"; }; + flexcan1: can@443a0000 { + compatible = "fsl,imx93-flexcan"; + reg = <0x443a0000 0x10000>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_BUS_AON>, + <&clk IMX93_CLK_CAN1_GATE>; + clock-names = "ipg", "per"; + assigned-clocks = <&clk IMX93_CLK_CAN1>; + assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>; + assigned-clock-rates = <40000000>; + fsl,clk-source = /bits/ 8 <0>; + status = "disabled"; + }; + iomuxc: pinctrl@443c0000 { compatible = "fsl,imx93-iomuxc"; reg = <0x443c0000 0x10000>; @@ -266,6 +280,19 @@ compatible = "fsl,imx93-anatop", "syscon"; reg = <0x44480000 0x10000>; }; + + adc1: adc@44530000 { + compatible = "nxp,imx93-adc"; + reg = <0x44530000 0x10000>; + interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_ADC1_GATE>; + clock-names = "ipg"; + #io-channel-cells = <1>; + status = "disabled"; + }; }; aips2: bus@42000000 { @@ -393,6 +420,20 @@ status = "disabled"; }; + flexcan2: can@425b0000 { + compatible = "fsl,imx93-flexcan"; + reg = <0x425b0000 0x10000>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_BUS_WAKEUP>, + <&clk IMX93_CLK_CAN2_GATE>; + clock-names = "ipg", "per"; + assigned-clocks = <&clk IMX93_CLK_CAN2>; + assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>; + assigned-clock-rates = <40000000>; + fsl,clk-source = /bits/ 8 <0>; + status = "disabled"; + }; + lpuart7: serial@42690000 { compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; reg = <0x42690000 0x1000>; diff --git a/arch/arm64/boot/dts/freescale/mba8mx.dtsi b/arch/arm64/boot/dts/freescale/mba8mx.dtsi index daa37adeff3b..8a9fe5cdcc98 100644 --- a/arch/arm64/boot/dts/freescale/mba8mx.dtsi +++ b/arch/arm64/boot/dts/freescale/mba8mx.dtsi @@ -206,8 +206,8 @@ ldoin-supply = <®_vcc_3v3>; }; - sensor1: sensor@1f { - compatible = "nxp,se97", "jedec,jc-42.4-temp"; + sensor1: temperator-sensor@1f { + compatible = "nxp,se97b", "jedec,jc-42.4-temp"; reg = <0x1f>; }; diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts index 0192a01bf852..3f13a960f34e 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts +++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts @@ -85,28 +85,28 @@ leds { compatible = "gpio-leds"; - user_led1 { + led-user-1 { label = "green:user1"; /* gpio_150_user_led1 */ gpios = <&gpio18 6 0>; linux,default-trigger = "heartbeat"; }; - user_led2 { + led-user-2 { label = "green:user2"; /* gpio_151_user_led2 */ gpios = <&gpio18 7 0>; linux,default-trigger = "none"; }; - user_led3 { + led-user-3 { label = "green:user3"; /* gpio_189_user_led3 */ gpios = <&gpio23 5 0>; linux,default-trigger = "mmc0"; }; - user_led4 { + led-user-4 { label = "green:user4"; /* gpio_190_user_led4 */ gpios = <&gpio23 6 0>; @@ -114,7 +114,7 @@ linux,default-trigger = "none"; }; - wlan_active_led { + led-wlan { label = "yellow:wlan"; /* gpio_205_wifi_active */ gpios = <&gpio25 5 0>; @@ -122,7 +122,7 @@ default-state = "off"; }; - bt_active_led { + led-bt { label = "blue:bt"; gpios = <&gpio25 7 0>; /* gpio_207_user_led1 */ diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts index 629e604aa281..f0672ec65b26 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts +++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts @@ -125,39 +125,39 @@ leds { compatible = "gpio-leds"; - user_led1 { + led-user-1 { label = "green:user1"; gpios = <&gpio4 0 0>; /* <&gpio_user_led_1>; */ linux,default-trigger = "heartbeat"; }; - user_led2 { + led-user-2 { label = "green:user2"; gpios = <&gpio4 1 0>; /* <&gpio_user_led_2>; */ linux,default-trigger = "mmc0"; }; - user_led3 { + led-user-3 { label = "green:user3"; gpios = <&gpio4 2 0>; /* <&gpio_user_led_3>; */ linux,default-trigger = "mmc1"; }; - user_led4 { + led-user-4 { label = "green:user4"; gpios = <&gpio4 3 0>; /* <&gpio_user_led_4>; */ panic-indicator; linux,default-trigger = "none"; }; - wlan_active_led { + led-wlan { label = "yellow:wlan"; gpios = <&gpio3 5 0>; /* <&gpio_wlan_active_led>; */ linux,default-trigger = "phy0tx"; default-state = "off"; }; - bt_active_led { + led-bt { label = "blue:bt"; gpios = <&gpio4 7 0>; /* <&gpio_bt_active_led>; */ linux,default-trigger = "hci0-power"; diff --git a/arch/arm64/boot/dts/hisilicon/hip07.dtsi b/arch/arm64/boot/dts/hisilicon/hip07.dtsi index b8746fb959b5..8a9436ca2531 100644 --- a/arch/arm64/boot/dts/hisilicon/hip07.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hip07.dtsi @@ -1254,7 +1254,7 @@ }; }; - uart0: uart@602b0000 { + uart0: serial@602b0000 { compatible = "arm,sbsa-uart"; reg = <0x0 0x602b0000 0x0 0x1000>; interrupt-parent = <&mbigen_uart>; diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi index 849b46dd8098..f9674cc46764 100644 --- a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi +++ b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi @@ -139,8 +139,8 @@ ranges = <0 0 0 0xffffffff>; base_fpga_region { - #address-cells = <0x1>; - #size-cells = <0x1>; + #address-cells = <0x2>; + #size-cells = <0x2>; compatible = "fpga-region"; fpga-mgr = <&fpga_mgr>; }; @@ -357,6 +357,21 @@ clock-names = "apb_pclk"; }; + pinctrl0: pinctrl@ffd13000 { + compatible = "pinctrl-single"; + #pinctrl-cells = <1>; + reg = <0xffd13000 0xa0>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x0000000f>; + }; + + pinctrl1: pinconf@ffd13100 { + compatible = "pinctrl-single"; + #pinctrl-cells = <1>; + reg = <0xffd13100 0x20>; + pinctrl-single,register-width = <32>; + }; + rst: rstmgr@ffd11000 { #reset-cells = <1>; compatible = "altr,stratix10-rst-mgr"; diff --git a/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi b/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi index 7308f7b6b22c..8bce64069138 100644 --- a/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi +++ b/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi @@ -98,7 +98,7 @@ uart1: serial@12100 { compatible = "snps,dw-apb-uart"; - reg = <0x11000 0x100>; + reg = <0x12100 0x100>; reg-shift = <2>; interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; reg-io-width = <1>; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-db.dts b/arch/arm64/boot/dts/marvell/armada-3720-db.dts index bd4e61d5448e..0cfb38492021 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts @@ -18,7 +18,7 @@ / { model = "Marvell Armada 3720 Development Board DB-88F3720-DDR3"; - compatible = "marvell,armada-3720-db", "marvell,armada3720", "marvell,armada3710"; + compatible = "marvell,armada-3720-db", "marvell,armada3720", "marvell,armada3700"; chosen { stdout-path = "serial0:115200n8"; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts index 5c4d8f379704..6715a19c1483 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts @@ -18,7 +18,7 @@ / { model = "Globalscale Marvell ESPRESSOBin Board (eMMC)"; compatible = "globalscale,espressobin-emmc", "globalscale,espressobin", - "marvell,armada3720", "marvell,armada3710"; + "marvell,armada3720", "marvell,armada3700"; }; &sdhci0 { diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts index 1b2ed63ae6a2..d29d2da95f4c 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts @@ -13,7 +13,7 @@ / { model = "Globalscale Marvell ESPRESSOBin Ultra Board"; compatible = "globalscale,espressobin-ultra", "globalscale,espressobin", - "marvell,armada3720", "marvell,armada3710"; + "marvell,armada3720", "marvell,armada3700"; aliases { /* ethernet1 is WAN port */ diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts index 75401eab4d42..2a8aa3901a9f 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts @@ -19,7 +19,7 @@ model = "Globalscale Marvell ESPRESSOBin Board V7 (eMMC)"; compatible = "globalscale,espressobin-v7-emmc", "globalscale,espressobin-v7", "globalscale,espressobin", "marvell,armada3720", - "marvell,armada3710"; + "marvell,armada3700"; aliases { /* ethernet1 is wan port */ diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts index 48a7f50fb427..b03af87611a9 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts @@ -18,7 +18,7 @@ / { model = "Globalscale Marvell ESPRESSOBin Board V7"; compatible = "globalscale,espressobin-v7", "globalscale,espressobin", - "marvell,armada3720", "marvell,armada3710"; + "marvell,armada3720", "marvell,armada3700"; aliases { /* ethernet1 is wan port */ diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts index 1542d836c090..c5a834b33b77 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts @@ -16,5 +16,5 @@ / { model = "Globalscale Marvell ESPRESSOBin Board"; - compatible = "globalscale,espressobin", "marvell,armada3720", "marvell,armada3710"; + compatible = "globalscale,espressobin", "marvell,armada3720", "marvell,armada3700"; }; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts index cd0988317623..9eab2bb22134 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts @@ -14,7 +14,7 @@ / { model = "CZ.NIC Turris Mox Board"; compatible = "cznic,turris-mox", "marvell,armada3720", - "marvell,armada3710"; + "marvell,armada3700"; aliases { spi0 = &spi0; diff --git a/arch/arm64/boot/dts/marvell/armada-372x.dtsi b/arch/arm64/boot/dts/marvell/armada-372x.dtsi index 5ce55bdbb995..02ae1e153288 100644 --- a/arch/arm64/boot/dts/marvell/armada-372x.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-372x.dtsi @@ -13,7 +13,7 @@ / { model = "Marvell Armada 3720 SoC"; - compatible = "marvell,armada3720", "marvell,armada3710"; + compatible = "marvell,armada3720", "marvell,armada3700"; cpus { cpu1: cpu@1 { diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile index 813e735c5b96..d5cd7b3e09cf 100644 --- a/arch/arm64/boot/dts/mediatek/Makefile +++ b/arch/arm64/boot/dts/mediatek/Makefile @@ -8,6 +8,11 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-emmc.dtbo +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-nand.dtbo +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-nor.dtbo +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-sd.dtbo dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-rfb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986b-rfb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8167-pumpkin.dtb diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi index 92212cddd37e..879dff24dcd3 100644 --- a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi @@ -270,7 +270,6 @@ compatible = "mediatek,mt2712-pinctrl"; reg = <0 0x1000b000 0 0x1000>; mediatek,pctl-regmap = <&syscfg_pctl_a>; - pins-are-numbered; gpio-controller; #gpio-cells = <2>; interrupt-controller; diff --git a/arch/arm64/boot/dts/mediatek/mt6358.dtsi b/arch/arm64/boot/dts/mediatek/mt6358.dtsi index 98f3b0e0c9f6..b605313bed99 100644 --- a/arch/arm64/boot/dts/mediatek/mt6358.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt6358.dtsi @@ -5,7 +5,7 @@ #include <dt-bindings/input/input.h> &pwrap { - pmic: mt6358 { + pmic: pmic { compatible = "mediatek,mt6358"; interrupt-controller; interrupt-parent = <&pio>; @@ -355,11 +355,11 @@ }; }; - mt6358rtc: mt6358rtc { + mt6358rtc: rtc { compatible = "mediatek,mt6358-rtc"; }; - mt6358keys: mt6358keys { + mt6358keys: keys { compatible = "mediatek,mt6358-keys"; power { linux,keycodes = <KEY_POWER>; diff --git a/arch/arm64/boot/dts/mediatek/mt6795.dtsi b/arch/arm64/boot/dts/mediatek/mt6795.dtsi index bb575837e4ce..b3fc76d837a9 100644 --- a/arch/arm64/boot/dts/mediatek/mt6795.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt6795.dtsi @@ -40,6 +40,12 @@ enable-method = "psci"; reg = <0x001>; cci-control-port = <&cci_control2>; + i-cache-size = <32768>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <32768>; + d-cache-line-size = <64>; + d-cache-sets = <128>; next-level-cache = <&l2_0>; }; @@ -49,6 +55,12 @@ enable-method = "psci"; reg = <0x002>; cci-control-port = <&cci_control2>; + i-cache-size = <32768>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <32768>; + d-cache-line-size = <64>; + d-cache-sets = <128>; next-level-cache = <&l2_0>; }; @@ -58,6 +70,12 @@ enable-method = "psci"; reg = <0x003>; cci-control-port = <&cci_control2>; + i-cache-size = <32768>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <32768>; + d-cache-line-size = <64>; + d-cache-sets = <128>; next-level-cache = <&l2_0>; }; @@ -67,6 +85,12 @@ enable-method = "psci"; reg = <0x100>; cci-control-port = <&cci_control1>; + i-cache-size = <32768>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <32768>; + d-cache-line-size = <64>; + d-cache-sets = <128>; next-level-cache = <&l2_1>; }; @@ -76,6 +100,12 @@ enable-method = "psci"; reg = <0x101>; cci-control-port = <&cci_control1>; + i-cache-size = <32768>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <32768>; + d-cache-line-size = <64>; + d-cache-sets = <128>; next-level-cache = <&l2_1>; }; @@ -85,6 +115,12 @@ enable-method = "psci"; reg = <0x102>; cci-control-port = <&cci_control1>; + i-cache-size = <32768>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <32768>; + d-cache-line-size = <64>; + d-cache-sets = <128>; next-level-cache = <&l2_1>; }; @@ -94,6 +130,12 @@ enable-method = "psci"; reg = <0x103>; cci-control-port = <&cci_control1>; + i-cache-size = <32768>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <32768>; + d-cache-line-size = <64>; + d-cache-sets = <128>; next-level-cache = <&l2_1>; }; @@ -138,11 +180,19 @@ l2_0: l2-cache0 { compatible = "cache"; cache-level = <2>; + cache-size = <1048576>; + cache-line-size = <64>; + cache-sets = <1024>; + cache-unified; }; l2_1: l2-cache1 { compatible = "cache"; cache-level = <2>; + cache-size = <1048576>; + cache-line-size = <64>; + cache-sets = <1024>; + cache-unified; }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi index 146e18b5b1f4..20129bc98e21 100644 --- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi @@ -435,6 +435,7 @@ pwm: pwm@11006000 { compatible = "mediatek,mt7622-pwm"; reg = <0 0x11006000 0 0x1000>; + #pwm-cells = <2>; interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_LOW>; clocks = <&topckgen CLK_TOP_PWM_SEL>, <&pericfg CLK_PERI_PWM_PD>, @@ -526,7 +527,6 @@ reg = <0 0x1100c000 0 0x1000>; interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_LOW>; clocks = <&pericfg CLK_PERI_BTIF_PD>; - clock-names = "main"; reg-shift = <2>; reg-io-width = <4>; status = "disabled"; diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-emmc.dtso b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-emmc.dtso new file mode 100644 index 000000000000..779dc6782bb1 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-emmc.dtso @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2021 MediaTek Inc. + * Author: Sam.Shih <sam.shih@mediatek.com> + */ + +/dts-v1/; +/plugin/; + +/ { + compatible = "bananapi,bpi-r3", "mediatek,mt7986a"; + + fragment@0 { + target-path = "/soc/mmc@11230000"; + __overlay__ { + bus-width = <8>; + max-frequency = <200000000>; + cap-mmc-highspeed; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + hs400-ds-delay = <0x14014>; + non-removable; + no-sd; + no-sdio; + status = "okay"; + }; + }; +}; + diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nand.dtso b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nand.dtso new file mode 100644 index 000000000000..15ee8c568f3c --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nand.dtso @@ -0,0 +1,55 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */ +/* + * Authors: Daniel Golle <daniel@makrotopia.org> + * Frank Wunderlich <frank-w@public-files.de> + */ + +/dts-v1/; +/plugin/; + +/ { + compatible = "bananapi,bpi-r3", "mediatek,mt7986a"; + + fragment@0 { + target-path = "/soc/spi@1100a000"; + __overlay__ { + #address-cells = <1>; + #size-cells = <0>; + spi_nand: spi_nand@0 { + compatible = "spi-nand"; + reg = <0>; + spi-max-frequency = <10000000>; + spi-tx-buswidth = <4>; + spi-rx-buswidth = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "bl2"; + reg = <0x0 0x80000>; + read-only; + }; + + partition@80000 { + label = "reserved"; + reg = <0x80000 0x300000>; + }; + + partition@380000 { + label = "fip"; + reg = <0x380000 0x200000>; + read-only; + }; + + partition@580000 { + label = "ubi"; + reg = <0x580000 0x7a80000>; + }; + }; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nor.dtso b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nor.dtso new file mode 100644 index 000000000000..84aa229e80f3 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nor.dtso @@ -0,0 +1,68 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */ +/* + * Authors: Daniel Golle <daniel@makrotopia.org> + * Frank Wunderlich <frank-w@public-files.de> + */ + +/dts-v1/; +/plugin/; + +/ { + compatible = "bananapi,bpi-r3", "mediatek,mt7986a"; + + fragment@0 { + target-path = "/soc/spi@1100a000"; + __overlay__ { + #address-cells = <1>; + #size-cells = <0>; + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "bl2"; + reg = <0x0 0x20000>; + read-only; + }; + + partition@20000 { + label = "reserved"; + reg = <0x20000 0x20000>; + }; + + partition@40000 { + label = "u-boot-env"; + reg = <0x40000 0x40000>; + }; + + partition@80000 { + label = "reserved2"; + reg = <0x80000 0x80000>; + }; + + partition@100000 { + label = "fip"; + reg = <0x100000 0x80000>; + read-only; + }; + + partition@180000 { + label = "recovery"; + reg = <0x180000 0xa80000>; + }; + + partition@c00000 { + label = "fit"; + reg = <0xc00000 0x1400000>; + }; + }; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-sd.dtso b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-sd.dtso new file mode 100644 index 000000000000..f623bce075ce --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-sd.dtso @@ -0,0 +1,23 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2021 MediaTek Inc. + * Author: Sam.Shih <sam.shih@mediatek.com> + */ + +/dts-v1/; +/plugin/; + +/ { + compatible = "bananapi,bpi-r3", "mediatek,mt7986a"; + + fragment@0 { + target-path = "/soc/mmc@11230000"; + __overlay__ { + bus-width = <4>; + max-frequency = <52000000>; + cap-sd-highspeed; + status = "okay"; + }; + }; +}; + diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts new file mode 100644 index 000000000000..33bd6febc160 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts @@ -0,0 +1,450 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2021 MediaTek Inc. + * Authors: Sam.Shih <sam.shih@mediatek.com> + * Frank Wunderlich <frank-w@public-files.de> + * Daniel Golle <daniel@makrotopia.org> + */ + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/mt65xx.h> + +#include "mt7986a.dtsi" + +/ { + model = "Bananapi BPI-R3"; + compatible = "bananapi,bpi-r3", "mediatek,mt7986a"; + + aliases { + serial0 = &uart0; + ethernet0 = &gmac0; + ethernet1 = &gmac1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + dcin: regulator-12vd { + compatible = "regulator-fixed"; + regulator-name = "12vd"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-boot-on; + regulator-always-on; + }; + + gpio-keys { + compatible = "gpio-keys"; + + reset-key { + label = "reset"; + linux,code = <KEY_RESTART>; + gpios = <&pio 9 GPIO_ACTIVE_LOW>; + }; + + wps-key { + label = "wps"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&pio 10 GPIO_ACTIVE_LOW>; + }; + }; + + /* i2c of the left SFP cage (wan) */ + i2c_sfp1: i2c-gpio-0 { + compatible = "i2c-gpio"; + sda-gpios = <&pio 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&pio 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + /* i2c of the right SFP cage (lan) */ + i2c_sfp2: i2c-gpio-1 { + compatible = "i2c-gpio"; + sda-gpios = <&pio 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&pio 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + leds { + compatible = "gpio-leds"; + + green_led: led-0 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_POWER; + gpios = <&pio 69 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + blue_led: led-1 { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_STATUS; + gpios = <&pio 86 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "1.8vd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + vin-supply = <&dcin>; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3.3vd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + vin-supply = <&dcin>; + }; + + /* left SFP cage (wan) */ + sfp1: sfp-1 { + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp1>; + los-gpios = <&pio 46 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&pio 49 GPIO_ACTIVE_LOW>; + tx-disable-gpios = <&pio 20 GPIO_ACTIVE_HIGH>; + tx-fault-gpios = <&pio 7 GPIO_ACTIVE_HIGH>; + }; + + /* right SFP cage (lan) */ + sfp2: sfp-2 { + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp2>; + los-gpios = <&pio 31 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&pio 47 GPIO_ACTIVE_LOW>; + tx-disable-gpios = <&pio 15 GPIO_ACTIVE_HIGH>; + tx-fault-gpios = <&pio 48 GPIO_ACTIVE_HIGH>; + }; +}; + +&crypto { + status = "okay"; +}; + +ð { + status = "okay"; + + gmac0: mac@0 { + compatible = "mediatek,eth-mac"; + reg = <0>; + phy-mode = "2500base-x"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + + gmac1: mac@1 { + compatible = "mediatek,eth-mac"; + reg = <1>; + phy-mode = "2500base-x"; + sfp = <&sfp1>; + managed = "in-band-status"; + }; + + mdio: mdio-bus { + #address-cells = <1>; + #size-cells = <0>; + }; +}; + +&mdio { + switch: switch@31 { + compatible = "mediatek,mt7531"; + reg = <31>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&pio>; + interrupts = <66 IRQ_TYPE_LEVEL_HIGH>; + reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>; + }; +}; + +&mmc0 { + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc0_pins_default>; + pinctrl-1 = <&mmc0_pins_uhs>; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c_pins>; + status = "okay"; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pcie_pins>; + status = "okay"; +}; + +&pcie_phy { + status = "okay"; +}; + +&pio { + i2c_pins: i2c-pins { + mux { + function = "i2c"; + groups = "i2c"; + }; + }; + + mmc0_pins_default: mmc0-pins { + mux { + function = "emmc"; + groups = "emmc_51"; + }; + conf-cmd-dat { + pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2", + "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5", + "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD"; + input-enable; + drive-strength = <4>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */ + }; + conf-clk { + pins = "EMMC_CK"; + drive-strength = <6>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */ + }; + conf-ds { + pins = "EMMC_DSL"; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */ + }; + conf-rst { + pins = "EMMC_RSTB"; + drive-strength = <4>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */ + }; + }; + + mmc0_pins_uhs: mmc0-uhs-pins { + mux { + function = "emmc"; + groups = "emmc_51"; + }; + conf-cmd-dat { + pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2", + "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5", + "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD"; + input-enable; + drive-strength = <4>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */ + }; + conf-clk { + pins = "EMMC_CK"; + drive-strength = <6>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */ + }; + conf-ds { + pins = "EMMC_DSL"; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */ + }; + conf-rst { + pins = "EMMC_RSTB"; + drive-strength = <4>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */ + }; + }; + + pcie_pins: pcie-pins { + mux { + function = "pcie"; + groups = "pcie_clk", "pcie_pereset"; + }; + }; + + spi_flash_pins: spi-flash-pins { + mux { + function = "spi"; + groups = "spi0", "spi0_wp_hold"; + }; + }; + + spic_pins: spic-pins { + mux { + function = "spi"; + groups = "spi1_0"; + }; + }; + + uart1_pins: uart1-pins { + mux { + function = "uart"; + groups = "uart1_rx_tx"; + }; + }; + + uart2_pins: uart2-pins { + mux { + function = "uart"; + groups = "uart2_0_rx_tx"; + }; + }; + + wf_2g_5g_pins: wf-2g-5g-pins { + mux { + function = "wifi"; + groups = "wf_2g", "wf_5g"; + }; + conf { + pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4", + "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6", + "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10", + "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1", + "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0", + "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8", + "WF1_TOP_CLK", "WF1_TOP_DATA"; + drive-strength = <4>; + }; + }; + + wf_dbdc_pins: wf-dbdc-pins { + mux { + function = "wifi"; + groups = "wf_dbdc"; + }; + conf { + pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4", + "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6", + "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10", + "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1", + "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0", + "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8", + "WF1_TOP_CLK", "WF1_TOP_DATA"; + drive-strength = <4>; + }; + }; + + wf_led_pins: wf-led-pins { + mux { + function = "led"; + groups = "wifi_led"; + }; + }; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi_flash_pins>; + status = "okay"; +}; + +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spic_pins>; + status = "okay"; +}; + +&ssusb { + status = "okay"; +}; + +&switch { + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "wan"; + }; + + port@1 { + reg = <1>; + label = "lan0"; + }; + + port@2 { + reg = <2>; + label = "lan1"; + }; + + port@3 { + reg = <3>; + label = "lan2"; + }; + + port@4 { + reg = <4>; + label = "lan3"; + }; + + port5: port@5 { + reg = <5>; + label = "lan4"; + phy-mode = "2500base-x"; + sfp = <&sfp2>; + managed = "in-band-status"; + }; + + port@6 { + reg = <6>; + label = "cpu"; + ethernet = <&gmac0>; + phy-mode = "2500base-x"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + }; +}; + +&trng { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "okay"; +}; + +&usb_phy { + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; + +&wifi { + status = "okay"; + pinctrl-names = "default", "dbdc"; + pinctrl-0 = <&wf_2g_5g_pins>, <&wf_led_pins>; + pinctrl-1 = <&wf_dbdc_pins>, <&wf_led_pins>; +}; + diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts index 9b83925893b7..4f18b4a9a8c8 100644 --- a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts +++ b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts @@ -5,6 +5,8 @@ */ /dts-v1/; +#include <dt-bindings/pinctrl/mt65xx.h> + #include "mt7986a.dtsi" / { @@ -23,6 +25,24 @@ device_type = "memory"; reg = <0 0x40000000 0 0x40000000>; }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; }; &crypto { @@ -58,7 +78,99 @@ }; }; +&mmc0 { + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc0_pins_default>; + pinctrl-1 = <&mmc0_pins_uhs>; + bus-width = <8>; + max-frequency = <200000000>; + cap-mmc-highspeed; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + hs400-ds-delay = <0x14014>; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + non-removable; + no-sd; + no-sdio; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pcie_pins>; + status = "okay"; +}; + +&pcie_phy { + status = "okay"; +}; + &pio { + mmc0_pins_default: mmc0-pins { + mux { + function = "emmc"; + groups = "emmc_51"; + }; + conf-cmd-dat { + pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2", + "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5", + "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD"; + input-enable; + drive-strength = <4>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */ + }; + conf-clk { + pins = "EMMC_CK"; + drive-strength = <6>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */ + }; + conf-ds { + pins = "EMMC_DSL"; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */ + }; + conf-rst { + pins = "EMMC_RSTB"; + drive-strength = <4>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */ + }; + }; + + mmc0_pins_uhs: mmc0-uhs-pins { + mux { + function = "emmc"; + groups = "emmc_51"; + }; + conf-cmd-dat { + pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2", + "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5", + "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD"; + input-enable; + drive-strength = <4>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */ + }; + conf-clk { + pins = "EMMC_CK"; + drive-strength = <6>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */ + }; + conf-ds { + pins = "EMMC_DSL"; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */ + }; + conf-rst { + pins = "EMMC_RSTB"; + drive-strength = <4>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */ + }; + }; + + pcie_pins: pcie-pins { + mux { + function = "pcie"; + groups = "pcie_clk", "pcie_wake", "pcie_pereset"; + }; + }; + spi_flash_pins: spi-flash-pins { mux { function = "spi"; @@ -140,6 +252,10 @@ status = "okay"; }; +&ssusb { + status = "okay"; +}; + &switch { ports { #address-cells = <1>; @@ -201,6 +317,10 @@ status = "okay"; }; +&usb_phy { + status = "okay"; +}; + &wifi { status = "okay"; pinctrl-names = "default", "dbdc"; diff --git a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi index 0e9406fc63e2..51944690e790 100644 --- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/mt7986-clk.h> #include <dt-bindings/reset/mt7986-resets.h> +#include <dt-bindings/phy/phy.h> / { compatible = "mediatek,mt7986a"; @@ -167,8 +168,7 @@ }; watchdog: watchdog@1001c000 { - compatible = "mediatek,mt7986-wdt", - "mediatek,mt6589-wdt"; + compatible = "mediatek,mt7986-wdt"; reg = <0 0x1001c000 0 0x1000>; interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; #reset-cells = <1>; @@ -323,6 +323,127 @@ status = "disabled"; }; + ssusb: usb@11200000 { + compatible = "mediatek,mt7986-xhci", + "mediatek,mtk-xhci"; + reg = <0 0x11200000 0 0x2e00>, + <0 0x11203e00 0 0x0100>; + reg-names = "mac", "ippc"; + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&infracfg CLK_INFRA_IUSB_SYS_CK>, + <&infracfg CLK_INFRA_IUSB_CK>, + <&infracfg CLK_INFRA_IUSB_133_CK>, + <&infracfg CLK_INFRA_IUSB_66M_CK>, + <&topckgen CLK_TOP_U2U3_XHCI_SEL>; + clock-names = "sys_ck", + "ref_ck", + "mcu_ck", + "dma_ck", + "xhci_ck"; + phys = <&u2port0 PHY_TYPE_USB2>, + <&u3port0 PHY_TYPE_USB3>, + <&u2port1 PHY_TYPE_USB2>; + status = "disabled"; + }; + + mmc0: mmc@11230000 { + compatible = "mediatek,mt7986-mmc"; + reg = <0 0x11230000 0 0x1000>, + <0 0x11c20000 0 0x1000>; + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&topckgen CLK_TOP_EMMC_416M_SEL>, + <&infracfg CLK_INFRA_MSDC_HCK_CK>, + <&infracfg CLK_INFRA_MSDC_CK>, + <&infracfg CLK_INFRA_MSDC_133M_CK>, + <&infracfg CLK_INFRA_MSDC_66M_CK>; + clock-names = "source", "hclk", "source_cg", "bus_clk", + "sys_cg"; + status = "disabled"; + }; + + pcie: pcie@11280000 { + compatible = "mediatek,mt7986-pcie", + "mediatek,mt8192-pcie"; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + reg = <0x00 0x11280000 0x00 0x4000>; + reg-names = "pcie-mac"; + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; + bus-range = <0x00 0xff>; + ranges = <0x82000000 0x00 0x20000000 0x00 + 0x20000000 0x00 0x10000000>; + clocks = <&infracfg CLK_INFRA_IPCIE_PIPE_CK>, + <&infracfg CLK_INFRA_IPCIE_CK>, + <&infracfg CLK_INFRA_IPCIER_CK>, + <&infracfg CLK_INFRA_IPCIEB_CK>; + clock-names = "pl_250m", "tl_26m", "peri_26m", "top_133m"; + status = "disabled"; + + phys = <&pcie_port PHY_TYPE_PCIE>; + phy-names = "pcie-phy"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &pcie_intc 0>, + <0 0 0 2 &pcie_intc 1>, + <0 0 0 3 &pcie_intc 2>, + <0 0 0 4 &pcie_intc 3>; + pcie_intc: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + }; + }; + + pcie_phy: t-phy@11c00000 { + compatible = "mediatek,mt7986-tphy", + "mediatek,generic-tphy-v2"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + pcie_port: pcie-phy@11c00000 { + reg = <0 0x11c00000 0 0x20000>; + clocks = <&clk40m>; + clock-names = "ref"; + #phy-cells = <1>; + }; + }; + + usb_phy: t-phy@11e10000 { + compatible = "mediatek,mt7986-tphy", + "mediatek,generic-tphy-v2"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x11e10000 0x1700>; + status = "disabled"; + + u2port0: usb-phy@0 { + reg = <0x0 0x700>; + clocks = <&topckgen CLK_TOP_DA_U2_REFSEL>, + <&topckgen CLK_TOP_DA_U2_CK_1P_SEL>; + clock-names = "ref", "da_ref"; + #phy-cells = <1>; + }; + + u3port0: usb-phy@700 { + reg = <0x700 0x900>; + clocks = <&topckgen CLK_TOP_USB3_PHY_SEL>; + clock-names = "ref"; + #phy-cells = <1>; + }; + + u2port1: usb-phy@1000 { + reg = <0x1000 0x700>; + clocks = <&topckgen CLK_TOP_DA_U2_REFSEL>, + <&topckgen CLK_TOP_DA_U2_CK_1P_SEL>; + clock-names = "ref", "da_ref"; + #phy-cells = <1>; + }; + }; + ethsys: syscon@15000000 { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts index 243760cd3011..188ce82ae56c 100644 --- a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts +++ b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts @@ -167,10 +167,18 @@ status = "okay"; }; +&ssusb { + status = "okay"; +}; + &uart0 { status = "okay"; }; +&usb_phy { + status = "okay"; +}; + &wifi { status = "okay"; pinctrl-names = "default", "dbdc"; diff --git a/arch/arm64/boot/dts/mediatek/mt8167.dtsi b/arch/arm64/boot/dts/mediatek/mt8167.dtsi index fbe1a1128cc6..6a54315cf650 100644 --- a/arch/arm64/boot/dts/mediatek/mt8167.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8167.dtsi @@ -117,7 +117,6 @@ compatible = "mediatek,mt8167-pinctrl"; reg = <0 0x1000b000 0 0x1000>; mediatek,pctl-regmap = <&syscfg_pctl>; - pins-are-numbered; gpio-controller; #gpio-cells = <2>; interrupt-controller; diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi index e21feb85d822..d452cab28c67 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi @@ -90,18 +90,6 @@ }; }; - panel: panel { - compatible = "lg,lp120up1"; - power-supply = <&panel_fixed_3v3>; - backlight = <&backlight>; - - port { - panel_in: endpoint { - remote-endpoint = <&ps8640_out>; - }; - }; - }; - panel_fixed_3v3: regulator1 { compatible = "regulator-fixed"; regulator-name = "PANEL_3V3"; @@ -161,6 +149,18 @@ }; }; }; + + watchdog { + compatible = "arm,smc-wdt"; + }; +}; + +/* + * Disable the original MMIO watch dog and switch to the SMC watchdog, which + * operates on the same MMIO. + */ +&watchdog { + status = "disabled"; }; &mfg_async { @@ -282,6 +282,20 @@ }; }; }; + + aux-bus { + panel: panel { + compatible = "lg,lp120up1"; + power-supply = <&panel_fixed_3v3>; + backlight = <&backlight>; + + port { + panel_in: endpoint { + remote-endpoint = <&ps8640_out>; + }; + }; + }; + }; }; }; @@ -913,7 +927,7 @@ }; &pwrap { - pmic: mt6397 { + pmic: pmic { compatible = "mediatek,mt6397"; #address-cells = <1>; #size-cells = <1>; @@ -929,7 +943,6 @@ pio6397: pinctrl { compatible = "mediatek,mt6397-pinctrl"; - pins-are-numbered; gpio-controller; #gpio-cells = <2>; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts index 0b5f154007be..755df5694234 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts +++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts @@ -300,7 +300,7 @@ /* Only MT8173 E1 needs USB power domain */ power-domains = <&spm MT8173_POWER_DOMAIN_USB>; - pmic: mt6397 { + pmic: pmic { compatible = "mediatek,mt6397"; interrupt-parent = <&pio>; interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi index 7640b5158ff9..c47d7d900f28 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi @@ -375,7 +375,6 @@ compatible = "mediatek,mt8173-pinctrl"; reg = <0 0x1000b000 0 0x1000>; mediatek,pctl-regmap = <&syscfg_pctl_a>; - pins-are-numbered; gpio-controller; #gpio-cells = <2>; interrupt-controller; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku1.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku1.dts index dec11a4eb59e..77b96ddf648e 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku1.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku1.dts @@ -13,7 +13,7 @@ pwmleds { compatible = "pwm-leds"; - keyboard_backlight: keyboard-backlight { + keyboard_backlight: led-0 { label = "cros_ec::kbd_backlight"; pwms = <&cros_ec_pwm 0>; max-brightness = <1023>; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi index 3ac83be53627..bf97b60ae4d1 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi @@ -4,20 +4,10 @@ */ #include "mt8183-kukui.dtsi" +/* Must come after mt8183-kukui.dtsi to modify cros_ec */ +#include <arm/cros-ec-keyboard.dtsi> / { - panel: panel { - compatible = "auo,b116xw03"; - power-supply = <&pp3300_panel>; - backlight = <&backlight_lcd0>; - - port { - panel_in: endpoint { - remote-endpoint = <&anx7625_out>; - }; - }; - }; - pp1200_mipibrdg: pp1200-mipibrdg { compatible = "regulator-fixed"; regulator-name = "pp1200_mipibrdg"; @@ -181,6 +171,20 @@ remote-endpoint = <&panel_in>; }; }; + + aux-bus { + panel: panel { + compatible = "edp-panel"; + power-supply = <&pp3300_panel>; + backlight = <&backlight_lcd0>; + + port { + panel_in: endpoint { + remote-endpoint = <&anx7625_out>; + }; + }; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi index 50a0dd36b5fb..a11adeb29b1f 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi @@ -372,6 +372,12 @@ }; }; +&cros_ec { + keyboard-controller { + compatible = "google,cros-ec-keyb-switches"; + }; +}; + &qca_wifi { qcom,ath10k-calibration-variant = "GO_KAKADU"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi index 06f8c80bf553..4864c39e53a4 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi @@ -339,6 +339,12 @@ }; }; +&cros_ec { + keyboard-controller { + compatible = "google,cros-ec-keyb-switches"; + }; +}; + &qca_wifi { qcom,ath10k-calibration-variant = "GO_KODAMA"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi index a7b0cb3ff7b0..d5f41c6c9881 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi @@ -343,6 +343,12 @@ }; }; +&cros_ec { + keyboard-controller { + compatible = "google,cros-ec-keyb-switches"; + }; +}; + &qca_wifi { qcom,ath10k-calibration-variant = "LE_Krane"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi index 7fc4c592a908..fbe14b13051a 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi @@ -963,6 +963,7 @@ pinctrl-0 = <&uart1_pins_default>; pinctrl-1 = <&uart1_pins_sleep>; status = "okay"; + /delete-property/ interrupts; interrupts-extended = <&sysirq GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>, <&pio 121 IRQ_TYPE_EDGE_FALLING>; @@ -989,5 +990,4 @@ }; }; -#include <arm/cros-ec-keyboard.dtsi> #include <arm/cros-ec-sbs.dtsi> diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi index 402136bfd535..3d1d7870a5f1 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi @@ -336,6 +336,13 @@ clock-names = "cpu", "intermediate"; operating-points-v2 = <&cluster0_opp>; dynamic-power-coefficient = <84>; + i-cache-size = <32768>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <32768>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_0>; #cooling-cells = <2>; mediatek,cci = <&cci>; }; @@ -352,6 +359,13 @@ clock-names = "cpu", "intermediate"; operating-points-v2 = <&cluster0_opp>; dynamic-power-coefficient = <84>; + i-cache-size = <32768>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <32768>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_0>; #cooling-cells = <2>; mediatek,cci = <&cci>; }; @@ -368,6 +382,13 @@ clock-names = "cpu", "intermediate"; operating-points-v2 = <&cluster0_opp>; dynamic-power-coefficient = <84>; + i-cache-size = <32768>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <32768>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_0>; #cooling-cells = <2>; mediatek,cci = <&cci>; }; @@ -384,6 +405,13 @@ clock-names = "cpu", "intermediate"; operating-points-v2 = <&cluster0_opp>; dynamic-power-coefficient = <84>; + i-cache-size = <32768>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <32768>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_0>; #cooling-cells = <2>; mediatek,cci = <&cci>; }; @@ -400,6 +428,13 @@ clock-names = "cpu", "intermediate"; operating-points-v2 = <&cluster1_opp>; dynamic-power-coefficient = <211>; + i-cache-size = <65536>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <65536>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_1>; #cooling-cells = <2>; mediatek,cci = <&cci>; }; @@ -416,6 +451,13 @@ clock-names = "cpu", "intermediate"; operating-points-v2 = <&cluster1_opp>; dynamic-power-coefficient = <211>; + i-cache-size = <65536>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <65536>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_1>; #cooling-cells = <2>; mediatek,cci = <&cci>; }; @@ -432,6 +474,13 @@ clock-names = "cpu", "intermediate"; operating-points-v2 = <&cluster1_opp>; dynamic-power-coefficient = <211>; + i-cache-size = <65536>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <65536>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_1>; #cooling-cells = <2>; mediatek,cci = <&cci>; }; @@ -448,6 +497,13 @@ clock-names = "cpu", "intermediate"; operating-points-v2 = <&cluster1_opp>; dynamic-power-coefficient = <211>; + i-cache-size = <65536>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <65536>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_1>; #cooling-cells = <2>; mediatek,cci = <&cci>; }; @@ -481,6 +537,24 @@ min-residency-us = <1300>; }; }; + + l2_0: l2-cache0 { + compatible = "cache"; + cache-level = <2>; + cache-size = <1048576>; + cache-line-size = <64>; + cache-sets = <1024>; + cache-unified; + }; + + l2_1: l2-cache1 { + compatible = "cache"; + cache-level = <2>; + cache-size = <1048576>; + cache-line-size = <64>; + cache-sets = <1024>; + cache-unified; + }; }; gpu_opp_table: opp-table-0 { @@ -585,6 +659,15 @@ method = "smc"; }; + clk13m: fixed-factor-clock-13m { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&clk26m>; + clock-div = <2>; + clock-mult = <1>; + clock-output-names = "clk13m"; + }; + clk26m: oscillator { compatible = "fixed-clock"; #clock-cells = <0>; @@ -968,8 +1051,7 @@ "mediatek,mt6765-timer"; reg = <0 0x10017000 0 0x1000>; interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&topckgen CLK_TOP_CLK13M>; - clock-names = "clk13m"; + clocks = <&clk13m>; }; iommu: iommu@10205000 { diff --git a/arch/arm64/boot/dts/mediatek/mt8186.dtsi b/arch/arm64/boot/dts/mediatek/mt8186.dtsi index c326aeb33a10..a0d3e1f731bd 100644 --- a/arch/arm64/boot/dts/mediatek/mt8186.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8186.dtsi @@ -7,6 +7,7 @@ #include <dt-bindings/clock/mt8186-clk.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/memory/mt8186-memory-port.h> #include <dt-bindings/pinctrl/mt8186-pinfunc.h> #include <dt-bindings/power/mt8186-power.h> #include <dt-bindings/phy/phy.h> @@ -47,14 +48,12 @@ core5 { cpu = <&cpu5>; }; - }; - cluster1 { - core0 { + core6 { cpu = <&cpu6>; }; - core1 { + core7 { cpu = <&cpu7>; }; }; @@ -67,7 +66,13 @@ enable-method = "psci"; clock-frequency = <2000000000>; capacity-dmips-mhz = <382>; - cpu-idle-states = <&cpu_off_l &cluster_off_l>; + cpu-idle-states = <&cpu_ret_l &cpu_off_l>; + i-cache-size = <32768>; + i-cache-line-size = <64>; + i-cache-sets = <128>; + d-cache-size = <32768>; + d-cache-line-size = <64>; + d-cache-sets = <128>; next-level-cache = <&l2_0>; #cooling-cells = <2>; }; @@ -79,7 +84,13 @@ enable-method = "psci"; clock-frequency = <2000000000>; capacity-dmips-mhz = <382>; - cpu-idle-states = <&cpu_off_l &cluster_off_l>; + cpu-idle-states = <&cpu_ret_l &cpu_off_l>; + i-cache-size = <32768>; + i-cache-line-size = <64>; + i-cache-sets = <128>; + d-cache-size = <32768>; + d-cache-line-size = <64>; + d-cache-sets = <128>; next-level-cache = <&l2_0>; #cooling-cells = <2>; }; @@ -91,7 +102,13 @@ enable-method = "psci"; clock-frequency = <2000000000>; capacity-dmips-mhz = <382>; - cpu-idle-states = <&cpu_off_l &cluster_off_l>; + cpu-idle-states = <&cpu_ret_l &cpu_off_l>; + i-cache-size = <32768>; + i-cache-line-size = <64>; + i-cache-sets = <128>; + d-cache-size = <32768>; + d-cache-line-size = <64>; + d-cache-sets = <128>; next-level-cache = <&l2_0>; #cooling-cells = <2>; }; @@ -103,7 +120,13 @@ enable-method = "psci"; clock-frequency = <2000000000>; capacity-dmips-mhz = <382>; - cpu-idle-states = <&cpu_off_l &cluster_off_l>; + cpu-idle-states = <&cpu_ret_l &cpu_off_l>; + i-cache-size = <32768>; + i-cache-line-size = <64>; + i-cache-sets = <128>; + d-cache-size = <32768>; + d-cache-line-size = <64>; + d-cache-sets = <128>; next-level-cache = <&l2_0>; #cooling-cells = <2>; }; @@ -115,7 +138,13 @@ enable-method = "psci"; clock-frequency = <2000000000>; capacity-dmips-mhz = <382>; - cpu-idle-states = <&cpu_off_l &cluster_off_l>; + cpu-idle-states = <&cpu_ret_l &cpu_off_l>; + i-cache-size = <32768>; + i-cache-line-size = <64>; + i-cache-sets = <128>; + d-cache-size = <32768>; + d-cache-line-size = <64>; + d-cache-sets = <128>; next-level-cache = <&l2_0>; #cooling-cells = <2>; }; @@ -127,7 +156,13 @@ enable-method = "psci"; clock-frequency = <2000000000>; capacity-dmips-mhz = <382>; - cpu-idle-states = <&cpu_off_l &cluster_off_l>; + cpu-idle-states = <&cpu_ret_l &cpu_off_l>; + i-cache-size = <32768>; + i-cache-line-size = <64>; + i-cache-sets = <128>; + d-cache-size = <32768>; + d-cache-line-size = <64>; + d-cache-sets = <128>; next-level-cache = <&l2_0>; #cooling-cells = <2>; }; @@ -139,7 +174,13 @@ enable-method = "psci"; clock-frequency = <2050000000>; capacity-dmips-mhz = <1024>; - cpu-idle-states = <&cpu_off_b &cluster_off_b>; + cpu-idle-states = <&cpu_ret_b &cpu_off_b>; + i-cache-size = <65536>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <65536>; + d-cache-line-size = <64>; + d-cache-sets = <256>; next-level-cache = <&l2_1>; #cooling-cells = <2>; }; @@ -151,7 +192,13 @@ enable-method = "psci"; clock-frequency = <2050000000>; capacity-dmips-mhz = <1024>; - cpu-idle-states = <&cpu_off_b &cluster_off_b>; + cpu-idle-states = <&cpu_ret_b &cpu_off_b>; + i-cache-size = <65536>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <65536>; + d-cache-line-size = <64>; + d-cache-sets = <256>; next-level-cache = <&l2_1>; #cooling-cells = <2>; }; @@ -159,7 +206,7 @@ idle-states { entry-method = "psci"; - cpu_off_l: cpu-off-l { + cpu_ret_l: cpu-retention-l { compatible = "arm,idle-state"; arm,psci-suspend-param = <0x00010001>; local-timer-stop; @@ -168,7 +215,7 @@ min-residency-us = <1600>; }; - cpu_off_b: cpu-off-b { + cpu_ret_b: cpu-retention-b { compatible = "arm,idle-state"; arm,psci-suspend-param = <0x00010001>; local-timer-stop; @@ -177,7 +224,7 @@ min-residency-us = <1400>; }; - cluster_off_l: cluster-off-l { + cpu_off_l: cpu-off-l { compatible = "arm,idle-state"; arm,psci-suspend-param = <0x01010001>; local-timer-stop; @@ -186,7 +233,7 @@ min-residency-us = <2100>; }; - cluster_off_b: cluster-off-b { + cpu_off_b: cpu-off-b { compatible = "arm,idle-state"; arm,psci-suspend-param = <0x01010001>; local-timer-stop; @@ -199,25 +246,37 @@ l2_0: l2-cache0 { compatible = "cache"; cache-level = <2>; + cache-size = <131072>; + cache-line-size = <64>; + cache-sets = <512>; next-level-cache = <&l3_0>; }; l2_1: l2-cache1 { compatible = "cache"; cache-level = <2>; + cache-size = <262144>; + cache-line-size = <64>; + cache-sets = <512>; next-level-cache = <&l3_0>; }; l3_0: l3-cache { compatible = "cache"; cache-level = <3>; + cache-size = <1048576>; + cache-line-size = <64>; + cache-sets = <1024>; + cache-unified; }; }; - clk13m: oscillator-13m { - compatible = "fixed-clock"; + clk13m: fixed-factor-clock-13m { + compatible = "fixed-factor-clock"; #clock-cells = <0>; - clock-frequency = <13000000>; + clocks = <&clk26m>; + clock-div = <2>; + clock-mult = <1>; clock-output-names = "clk13m"; }; @@ -332,9 +391,196 @@ #interrupt-cells = <2>; }; + scpsys: syscon@10006000 { + compatible = "mediatek,mt8186-scpsys", "syscon", "simple-mfd"; + reg = <0 0x10006000 0 0x1000>; + + /* System Power Manager */ + spm: power-controller { + compatible = "mediatek,mt8186-power-controller"; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + /* power domain of the SoC */ + mfg0: power-domain@MT8186_POWER_DOMAIN_MFG0 { + reg = <MT8186_POWER_DOMAIN_MFG0>; + clocks = <&topckgen CLK_TOP_MFG>; + clock-names = "mfg00"; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + power-domain@MT8186_POWER_DOMAIN_MFG1 { + reg = <MT8186_POWER_DOMAIN_MFG1>; + mediatek,infracfg = <&infracfg_ao>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + power-domain@MT8186_POWER_DOMAIN_MFG2 { + reg = <MT8186_POWER_DOMAIN_MFG2>; + #power-domain-cells = <0>; + }; + + power-domain@MT8186_POWER_DOMAIN_MFG3 { + reg = <MT8186_POWER_DOMAIN_MFG3>; + #power-domain-cells = <0>; + }; + }; + }; + + power-domain@MT8186_POWER_DOMAIN_CSIRX_TOP { + reg = <MT8186_POWER_DOMAIN_CSIRX_TOP>; + clocks = <&topckgen CLK_TOP_SENINF>, + <&topckgen CLK_TOP_SENINF1>; + clock-names = "csirx_top0", "csirx_top1"; + #power-domain-cells = <0>; + }; + + power-domain@MT8186_POWER_DOMAIN_SSUSB { + reg = <MT8186_POWER_DOMAIN_SSUSB>; + #power-domain-cells = <0>; + }; + + power-domain@MT8186_POWER_DOMAIN_SSUSB_P1 { + reg = <MT8186_POWER_DOMAIN_SSUSB_P1>; + #power-domain-cells = <0>; + }; + + power-domain@MT8186_POWER_DOMAIN_ADSP_AO { + reg = <MT8186_POWER_DOMAIN_ADSP_AO>; + clocks = <&topckgen CLK_TOP_AUDIODSP>, + <&topckgen CLK_TOP_ADSP_BUS>; + clock-names = "audioadsp", "adsp_bus"; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + power-domain@MT8186_POWER_DOMAIN_ADSP_INFRA { + reg = <MT8186_POWER_DOMAIN_ADSP_INFRA>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + power-domain@MT8186_POWER_DOMAIN_ADSP_TOP { + reg = <MT8186_POWER_DOMAIN_ADSP_TOP>; + mediatek,infracfg = <&infracfg_ao>; + #power-domain-cells = <0>; + }; + }; + }; + + power-domain@MT8186_POWER_DOMAIN_CONN_ON { + reg = <MT8186_POWER_DOMAIN_CONN_ON>; + mediatek,infracfg = <&infracfg_ao>; + #power-domain-cells = <0>; + }; + + power-domain@MT8186_POWER_DOMAIN_DIS { + reg = <MT8186_POWER_DOMAIN_DIS>; + clocks = <&topckgen CLK_TOP_DISP>, + <&topckgen CLK_TOP_MDP>, + <&mmsys CLK_MM_SMI_INFRA>, + <&mmsys CLK_MM_SMI_COMMON>, + <&mmsys CLK_MM_SMI_GALS>, + <&mmsys CLK_MM_SMI_IOMMU>; + clock-names = "disp", "mdp", "smi_infra", "smi_common", + "smi_gals", "smi_iommu"; + mediatek,infracfg = <&infracfg_ao>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + power-domain@MT8186_POWER_DOMAIN_VDEC { + reg = <MT8186_POWER_DOMAIN_VDEC>; + clocks = <&topckgen CLK_TOP_VDEC>, + <&vdecsys CLK_VDEC_LARB1_CKEN>; + clock-names = "vdec0", "larb"; + mediatek,infracfg = <&infracfg_ao>; + #power-domain-cells = <0>; + }; + + power-domain@MT8186_POWER_DOMAIN_CAM { + reg = <MT8186_POWER_DOMAIN_CAM>; + clocks = <&topckgen CLK_TOP_CAM>, + <&topckgen CLK_TOP_SENINF>, + <&topckgen CLK_TOP_SENINF1>, + <&topckgen CLK_TOP_SENINF2>, + <&topckgen CLK_TOP_SENINF3>, + <&topckgen CLK_TOP_CAMTM>, + <&camsys CLK_CAM2MM_GALS>; + clock-names = "cam-top", "cam0", "cam1", "cam2", + "cam3", "cam-tm", "gals"; + mediatek,infracfg = <&infracfg_ao>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + power-domain@MT8186_POWER_DOMAIN_CAM_RAWB { + reg = <MT8186_POWER_DOMAIN_CAM_RAWB>; + #power-domain-cells = <0>; + }; + + power-domain@MT8186_POWER_DOMAIN_CAM_RAWA { + reg = <MT8186_POWER_DOMAIN_CAM_RAWA>; + #power-domain-cells = <0>; + }; + }; + + power-domain@MT8186_POWER_DOMAIN_IMG { + reg = <MT8186_POWER_DOMAIN_IMG>; + clocks = <&topckgen CLK_TOP_IMG1>, + <&imgsys1 CLK_IMG1_GALS_IMG1>; + clock-names = "img-top", "gals"; + mediatek,infracfg = <&infracfg_ao>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + power-domain@MT8186_POWER_DOMAIN_IMG2 { + reg = <MT8186_POWER_DOMAIN_IMG2>; + #power-domain-cells = <0>; + }; + }; + + power-domain@MT8186_POWER_DOMAIN_IPE { + reg = <MT8186_POWER_DOMAIN_IPE>; + clocks = <&topckgen CLK_TOP_IPE>, + <&ipesys CLK_IPE_LARB19>, + <&ipesys CLK_IPE_LARB20>, + <&ipesys CLK_IPE_SMI_SUBCOM>, + <&ipesys CLK_IPE_GALS_IPE>; + clock-names = "ipe-top", "ipe-larb0", "ipe-larb1", + "ipe-smi", "ipe-gals"; + mediatek,infracfg = <&infracfg_ao>; + #power-domain-cells = <0>; + }; + + power-domain@MT8186_POWER_DOMAIN_VENC { + reg = <MT8186_POWER_DOMAIN_VENC>; + clocks = <&topckgen CLK_TOP_VENC>, + <&vencsys CLK_VENC_CKE1_VENC>; + clock-names = "venc0", "larb"; + mediatek,infracfg = <&infracfg_ao>; + #power-domain-cells = <0>; + }; + + power-domain@MT8186_POWER_DOMAIN_WPE { + reg = <MT8186_POWER_DOMAIN_WPE>; + clocks = <&topckgen CLK_TOP_WPE>, + <&wpesys CLK_WPE_SMI_LARB8_CK_EN>, + <&wpesys CLK_WPE_SMI_LARB8_PCLK_EN>; + clock-names = "wpe0", "larb-ck", "larb-pclk"; + mediatek,infracfg = <&infracfg_ao>; + #power-domain-cells = <0>; + }; + }; + }; + }; + watchdog: watchdog@10007000 { - compatible = "mediatek,mt8186-wdt", - "mediatek,mt6589-wdt"; + compatible = "mediatek,mt8186-wdt"; mediatek,disable-extrst; reg = <0 0x10007000 0 0x1000>; #reset-cells = <1>; @@ -372,6 +618,20 @@ interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH 0>; }; + adsp_mailbox0: mailbox@10686000 { + compatible = "mediatek,mt8186-adsp-mbox"; + #mbox-cells = <0>; + reg = <0 0x10686100 0 0x1000>; + interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + adsp_mailbox1: mailbox@10687000 { + compatible = "mediatek,mt8186-adsp-mbox"; + #mbox-cells = <0>; + reg = <0 0x10687100 0 0x1000>; + interrupts = <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH 0>; + }; + nor_flash: spi@11000000 { compatible = "mediatek,mt8186-nor"; reg = <0 0x11000000 0 0x1000>; @@ -659,15 +919,78 @@ status = "disabled"; }; + afe: audio-controller@11210000 { + compatible = "mediatek,mt8186-sound"; + reg = <0 0x11210000 0 0x2000>; + clocks = <&infracfg_ao CLK_INFRA_AO_AUDIO>, + <&infracfg_ao CLK_INFRA_AO_AUDIO_26M_BCLK>, + <&topckgen CLK_TOP_AUDIO>, + <&topckgen CLK_TOP_AUD_INTBUS>, + <&topckgen CLK_TOP_MAINPLL_D2_D4>, + <&topckgen CLK_TOP_AUD_1>, + <&apmixedsys CLK_APMIXED_APLL1>, + <&topckgen CLK_TOP_AUD_2>, + <&apmixedsys CLK_APMIXED_APLL2>, + <&topckgen CLK_TOP_AUD_ENGEN1>, + <&topckgen CLK_TOP_APLL1_D8>, + <&topckgen CLK_TOP_AUD_ENGEN2>, + <&topckgen CLK_TOP_APLL2_D8>, + <&topckgen CLK_TOP_APLL_I2S0_MCK_SEL>, + <&topckgen CLK_TOP_APLL_I2S1_MCK_SEL>, + <&topckgen CLK_TOP_APLL_I2S2_MCK_SEL>, + <&topckgen CLK_TOP_APLL_I2S4_MCK_SEL>, + <&topckgen CLK_TOP_APLL_TDMOUT_MCK_SEL>, + <&topckgen CLK_TOP_APLL12_CK_DIV0>, + <&topckgen CLK_TOP_APLL12_CK_DIV1>, + <&topckgen CLK_TOP_APLL12_CK_DIV2>, + <&topckgen CLK_TOP_APLL12_CK_DIV4>, + <&topckgen CLK_TOP_APLL12_CK_DIV_TDMOUT_M>, + <&topckgen CLK_TOP_AUDIO_H>, + <&clk26m>; + clock-names = "aud_infra_clk", + "mtkaif_26m_clk", + "top_mux_audio", + "top_mux_audio_int", + "top_mainpll_d2_d4", + "top_mux_aud_1", + "top_apll1_ck", + "top_mux_aud_2", + "top_apll2_ck", + "top_mux_aud_eng1", + "top_apll1_d8", + "top_mux_aud_eng2", + "top_apll2_d8", + "top_i2s0_m_sel", + "top_i2s1_m_sel", + "top_i2s2_m_sel", + "top_i2s4_m_sel", + "top_tdm_m_sel", + "top_apll12_div0", + "top_apll12_div1", + "top_apll12_div2", + "top_apll12_div4", + "top_apll12_div_tdm", + "top_mux_audio_h", + "top_clk26m_clk"; + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH 0>; + mediatek,apmixedsys = <&apmixedsys>; + mediatek,infracfg = <&infracfg_ao>; + mediatek,topckgen = <&topckgen>; + resets = <&watchdog MT8186_TOPRGU_AUDIO_SW_RST>; + reset-names = "audiosys"; + status = "disabled"; + }; + mmc0: mmc@11230000 { compatible = "mediatek,mt8186-mmc", "mediatek,mt8183-mmc"; - reg = <0 0x11230000 0 0x1000>, + reg = <0 0x11230000 0 0x10000>, <0 0x11cd0000 0 0x1000>; clocks = <&topckgen CLK_TOP_MSDC50_0>, <&infracfg_ao CLK_INFRA_AO_MSDC0>, - <&infracfg_ao CLK_INFRA_AO_MSDC0_SRC>; - clock-names = "source", "hclk", "source_cg"; + <&infracfg_ao CLK_INFRA_AO_MSDC0_SRC>, + <&infracfg_ao CLK_INFRA_AO_MSDCFDE>; + clock-names = "source", "hclk", "source_cg", "crypto"; interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH 0>; assigned-clocks = <&topckgen CLK_TOP_MSDC50_0>; assigned-clock-parents = <&apmixedsys CLK_APMIXED_MSDCPLL>; @@ -759,24 +1082,149 @@ #reset-cells = <1>; }; + smi_common: smi@14002000 { + compatible = "mediatek,mt8186-smi-common"; + reg = <0 0x14002000 0 0x1000>; + clocks = <&mmsys CLK_MM_SMI_COMMON>, <&mmsys CLK_MM_SMI_COMMON>, + <&mmsys CLK_MM_SMI_GALS>, <&mmsys CLK_MM_SMI_GALS>; + clock-names = "apb", "smi", "gals0", "gals1"; + power-domains = <&spm MT8186_POWER_DOMAIN_DIS>; + }; + + larb0: smi@14003000 { + compatible = "mediatek,mt8186-smi-larb"; + reg = <0 0x14003000 0 0x1000>; + clocks = <&mmsys CLK_MM_SMI_COMMON>, + <&mmsys CLK_MM_SMI_COMMON>; + clock-names = "apb", "smi"; + mediatek,larb-id = <0>; + mediatek,smi = <&smi_common>; + power-domains = <&spm MT8186_POWER_DOMAIN_DIS>; + }; + + larb1: smi@14004000 { + compatible = "mediatek,mt8186-smi-larb"; + reg = <0 0x14004000 0 0x1000>; + clocks = <&mmsys CLK_MM_SMI_COMMON>, + <&mmsys CLK_MM_SMI_COMMON>; + clock-names = "apb", "smi"; + mediatek,larb-id = <1>; + mediatek,smi = <&smi_common>; + power-domains = <&spm MT8186_POWER_DOMAIN_DIS>; + }; + + dpi: dpi@1400a000 { + compatible = "mediatek,mt8186-dpi"; + reg = <0 0x1400a000 0 0x1000>; + clocks = <&topckgen CLK_TOP_DPI>, + <&mmsys CLK_MM_DISP_DPI>, + <&apmixedsys CLK_APMIXED_TVDPLL>; + clock-names = "pixel", "engine", "pll"; + assigned-clocks = <&topckgen CLK_TOP_DPI>; + assigned-clock-parents = <&topckgen CLK_TOP_TVDPLL_D2>; + interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_LOW 0>; + status = "disabled"; + + port { + dpi_out: endpoint { }; + }; + }; + + dsi0: dsi@14013000 { + compatible = "mediatek,mt8186-dsi"; + reg = <0 0x14013000 0 0x1000>; + clocks = <&mmsys CLK_MM_DSI0>, + <&mmsys CLK_MM_DSI0_DSI_CK_DOMAIN>, + <&mipi_tx0>; + clock-names = "engine", "digital", "hs"; + interrupts = <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH 0>; + power-domains = <&spm MT8186_POWER_DOMAIN_DIS>; + resets = <&mmsys MT8186_MMSYS_SW0_RST_B_DISP_DSI0>; + phys = <&mipi_tx0>; + phy-names = "dphy"; + status = "disabled"; + + port { + dsi_out: endpoint { }; + }; + }; + + iommu_mm: iommu@14016000 { + compatible = "mediatek,mt8186-iommu-mm"; + reg = <0 0x14016000 0 0x1000>; + clocks = <&mmsys CLK_MM_SMI_IOMMU>; + clock-names = "bclk"; + interrupts = <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH 0>; + mediatek,larbs = <&larb0 &larb1 &larb2 &larb4 + &larb7 &larb8 &larb9 &larb11 + &larb13 &larb14 &larb16 &larb17 + &larb19 &larb20>; + power-domains = <&spm MT8186_POWER_DOMAIN_DIS>; + #iommu-cells = <1>; + }; + wpesys: clock-controller@14020000 { compatible = "mediatek,mt8186-wpesys"; reg = <0 0x14020000 0 0x1000>; #clock-cells = <1>; }; + larb8: smi@14023000 { + compatible = "mediatek,mt8186-smi-larb"; + reg = <0 0x14023000 0 0x1000>; + clocks = <&wpesys CLK_WPE_SMI_LARB8_CK_EN>, + <&wpesys CLK_WPE_SMI_LARB8_CK_EN>; + clock-names = "apb", "smi"; + mediatek,larb-id = <8>; + mediatek,smi = <&smi_common>; + power-domains = <&spm MT8186_POWER_DOMAIN_WPE>; + }; + imgsys1: clock-controller@15020000 { compatible = "mediatek,mt8186-imgsys1"; reg = <0 0x15020000 0 0x1000>; #clock-cells = <1>; }; + larb9: smi@1502e000 { + compatible = "mediatek,mt8186-smi-larb"; + reg = <0 0x1502e000 0 0x1000>; + clocks = <&imgsys1 CLK_IMG1_GALS_IMG1>, + <&imgsys1 CLK_IMG1_LARB9_IMG1>; + clock-names = "apb", "smi"; + mediatek,larb-id = <9>; + mediatek,smi = <&smi_common>; + power-domains = <&spm MT8186_POWER_DOMAIN_IMG>; + }; + imgsys2: clock-controller@15820000 { compatible = "mediatek,mt8186-imgsys2"; reg = <0 0x15820000 0 0x1000>; #clock-cells = <1>; }; + larb11: smi@1582e000 { + compatible = "mediatek,mt8186-smi-larb"; + reg = <0 0x1582e000 0 0x1000>; + clocks = <&imgsys1 CLK_IMG1_LARB9_IMG1>, + <&imgsys2 CLK_IMG2_LARB9_IMG2>; + clock-names = "apb", "smi"; + mediatek,larb-id = <11>; + mediatek,smi = <&smi_common>; + power-domains = <&spm MT8186_POWER_DOMAIN_IMG2>; + }; + + larb4: smi@1602e000 { + compatible = "mediatek,mt8186-smi-larb"; + reg = <0 0x1602e000 0 0x1000>; + clocks = <&vdecsys CLK_VDEC_LARB1_CKEN>, + <&vdecsys CLK_VDEC_LARB1_CKEN>; + clock-names = "apb", "smi"; + mediatek,larb-id = <4>; + mediatek,smi = <&smi_common>; + power-domains = <&spm MT8186_POWER_DOMAIN_VDEC>; + }; + vdecsys: clock-controller@1602f000 { compatible = "mediatek,mt8186-vdecsys"; reg = <0 0x1602f000 0 0x1000>; @@ -789,12 +1237,65 @@ #clock-cells = <1>; }; + larb7: smi@17010000 { + compatible = "mediatek,mt8186-smi-larb"; + reg = <0 0x17010000 0 0x1000>; + clocks = <&vencsys CLK_VENC_CKE1_VENC>, + <&vencsys CLK_VENC_CKE1_VENC>; + clock-names = "apb", "smi"; + mediatek,larb-id = <7>; + mediatek,smi = <&smi_common>; + power-domains = <&spm MT8186_POWER_DOMAIN_VENC>; + }; + camsys: clock-controller@1a000000 { compatible = "mediatek,mt8186-camsys"; reg = <0 0x1a000000 0 0x1000>; #clock-cells = <1>; }; + larb13: smi@1a001000 { + compatible = "mediatek,mt8186-smi-larb"; + reg = <0 0x1a001000 0 0x1000>; + clocks = <&camsys CLK_CAM2MM_GALS>, <&camsys CLK_CAM_LARB13>; + clock-names = "apb", "smi"; + mediatek,larb-id = <13>; + mediatek,smi = <&smi_common>; + power-domains = <&spm MT8186_POWER_DOMAIN_CAM>; + }; + + larb14: smi@1a002000 { + compatible = "mediatek,mt8186-smi-larb"; + reg = <0 0x1a002000 0 0x1000>; + clocks = <&camsys CLK_CAM2MM_GALS>, <&camsys CLK_CAM_LARB14>; + clock-names = "apb", "smi"; + mediatek,larb-id = <14>; + mediatek,smi = <&smi_common>; + power-domains = <&spm MT8186_POWER_DOMAIN_CAM>; + }; + + larb16: smi@1a00f000 { + compatible = "mediatek,mt8186-smi-larb"; + reg = <0 0x1a00f000 0 0x1000>; + clocks = <&camsys CLK_CAM_LARB14>, + <&camsys_rawa CLK_CAM_RAWA_LARBX_RAWA>; + clock-names = "apb", "smi"; + mediatek,larb-id = <16>; + mediatek,smi = <&smi_common>; + power-domains = <&spm MT8186_POWER_DOMAIN_CAM_RAWA>; + }; + + larb17: smi@1a010000 { + compatible = "mediatek,mt8186-smi-larb"; + reg = <0 0x1a010000 0 0x1000>; + clocks = <&camsys CLK_CAM_LARB13>, + <&camsys_rawb CLK_CAM_RAWB_LARBX_RAWB>; + clock-names = "apb", "smi"; + mediatek,larb-id = <17>; + mediatek,smi = <&smi_common>; + power-domains = <&spm MT8186_POWER_DOMAIN_CAM_RAWB>; + }; + camsys_rawa: clock-controller@1a04f000 { compatible = "mediatek,mt8186-camsys_rawa"; reg = <0 0x1a04f000 0 0x1000>; @@ -813,10 +1314,40 @@ #clock-cells = <1>; }; + larb2: smi@1b002000 { + compatible = "mediatek,mt8186-smi-larb"; + reg = <0 0x1b002000 0 0x1000>; + clocks = <&mdpsys CLK_MDP_SMI0>, <&mdpsys CLK_MDP_SMI0>; + clock-names = "apb", "smi"; + mediatek,larb-id = <2>; + mediatek,smi = <&smi_common>; + power-domains = <&spm MT8186_POWER_DOMAIN_DIS>; + }; + ipesys: clock-controller@1c000000 { compatible = "mediatek,mt8186-ipesys"; reg = <0 0x1c000000 0 0x1000>; #clock-cells = <1>; }; + + larb20: smi@1c00f000 { + compatible = "mediatek,mt8186-smi-larb"; + reg = <0 0x1c00f000 0 0x1000>; + clocks = <&ipesys CLK_IPE_LARB20>, <&ipesys CLK_IPE_LARB20>; + clock-names = "apb", "smi"; + mediatek,larb-id = <20>; + mediatek,smi = <&smi_common>; + power-domains = <&spm MT8186_POWER_DOMAIN_IPE>; + }; + + larb19: smi@1c10f000 { + compatible = "mediatek,mt8186-smi-larb"; + reg = <0 0x1c10f000 0 0x1000>; + clocks = <&ipesys CLK_IPE_LARB19>, <&ipesys CLK_IPE_LARB19>; + clock-names = "apb", "smi"; + mediatek,larb-id = <19>; + mediatek,smi = <&smi_common>; + power-domains = <&spm MT8186_POWER_DOMAIN_IPE>; + }; }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada-audio-rt1015p-rt5682.dtsi b/arch/arm64/boot/dts/mediatek/mt8192-asurada-audio-rt1015p-rt5682.dtsi new file mode 100644 index 000000000000..f521f50d448f --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada-audio-rt1015p-rt5682.dtsi @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2020 Google LLC + */ + +#include "mt8192-asurada-audio-rt5682.dtsi" +#include "mt8192-asurada-audio-rt1015p.dtsi" + +&sound { + compatible = "mediatek,mt8192_mt6359_rt1015p_rt5682"; + + speaker-codecs { + sound-dai = <&rt1015p>; + }; + + headset-codec { + sound-dai = <&rt5682 0>; + }; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada-audio-rt1015p.dtsi b/arch/arm64/boot/dts/mediatek/mt8192-asurada-audio-rt1015p.dtsi new file mode 100644 index 000000000000..e5743789934e --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada-audio-rt1015p.dtsi @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2022 MediaTek Inc. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/mt8192-pinfunc.h> + +/ { + rt1015p: audio-codec { + compatible = "realtek,rt1015p"; + pinctrl-names = "default"; + pinctrl-0 = <&rt1015p_pins>; + sdb-gpios = <&pio 147 GPIO_ACTIVE_HIGH>; + #sound-dai-cells = <0>; + }; +}; + +&pio { + rt1015p_pins: rt1015p-default-pins { + pins { + pinmux = <PINMUX_GPIO147__FUNC_GPIO147>; + output-low; + }; + }; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada-audio-rt5682.dtsi b/arch/arm64/boot/dts/mediatek/mt8192-asurada-audio-rt5682.dtsi new file mode 100644 index 000000000000..05e48b870a92 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada-audio-rt5682.dtsi @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2022 MediaTek Inc. + */ + +&i2c1 { + rt5682: audio-codec@1a { + compatible = "realtek,rt5682i"; + reg = <0x1a>; + interrupts-extended = <&pio 18 IRQ_TYPE_LEVEL_LOW>; + realtek,jd-src = <1>; + realtek,btndet-delay = <16>; + #sound-dai-cells = <1>; + + AVDD-supply = <&mt6359_vio18_ldo_reg>; + DBVDD-supply = <&mt6359_vio18_ldo_reg>; + LDO1-IN-supply = <&mt6359_vio18_ldo_reg>; + MICVDD-supply = <&pp3300_g>; + VBAT-supply = <&pp3300_ldo_z>; + }; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada-hayato-r1.dts b/arch/arm64/boot/dts/mediatek/mt8192-asurada-hayato-r1.dts index 1e91491945f6..43a823990a92 100644 --- a/arch/arm64/boot/dts/mediatek/mt8192-asurada-hayato-r1.dts +++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada-hayato-r1.dts @@ -4,6 +4,7 @@ */ /dts-v1/; #include "mt8192-asurada.dtsi" +#include "mt8192-asurada-audio-rt1015p-rt5682.dtsi" / { model = "Google Hayato rev1"; diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada-spherion-r0.dts b/arch/arm64/boot/dts/mediatek/mt8192-asurada-spherion-r0.dts index fa3d9573f37a..c6ad10cec95e 100644 --- a/arch/arm64/boot/dts/mediatek/mt8192-asurada-spherion-r0.dts +++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada-spherion-r0.dts @@ -4,6 +4,7 @@ */ /dts-v1/; #include "mt8192-asurada.dtsi" +#include "mt8192-asurada-audio-rt1015p-rt5682.dtsi" #include <dt-bindings/leds/common.h> / { diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi index 4b314435f8fd..9f12257ab4e7 100644 --- a/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi @@ -11,6 +11,13 @@ / { aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c7 = &i2c7; + mmc0 = &mmc0; + mmc1 = &mmc1; serial0 = &uart0; }; @@ -23,6 +30,59 @@ reg = <0 0x40000000 0 0x80000000>; }; + backlight_lcd0: backlight-lcd0 { + compatible = "pwm-backlight"; + pwms = <&pwm0 0 500000>; + power-supply = <&ppvar_sys>; + enable-gpios = <&pio 152 0>; + brightness-levels = <0 1023>; + num-interpolated-steps = <1023>; + default-brightness-level = <576>; + }; + + dmic_codec: dmic-codec { + compatible = "dmic-codec"; + num-channels = <2>; + wakeup-delay-ms = <50>; + }; + + pp1000_dpbrdg: regulator-1v0-dpbrdg { + compatible = "regulator-fixed"; + regulator-name = "pp1000_dpbrdg"; + pinctrl-names = "default"; + pinctrl-0 = <&pp1000_dpbrdg_en_pins>; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + enable-active-high; + regulator-boot-on; + gpio = <&pio 19 GPIO_ACTIVE_HIGH>; + vin-supply = <&mt6359_vs2_buck_reg>; + }; + + pp1000_mipibrdg: regulator-1v0-mipibrdg { + compatible = "regulator-fixed"; + regulator-name = "pp1000_mipibrdg"; + pinctrl-names = "default"; + pinctrl-0 = <&pp1000_mipibrdg_en_pins>; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + enable-active-high; + regulator-boot-on; + gpio = <&pio 129 GPIO_ACTIVE_HIGH>; + vin-supply = <&mt6359_vs2_buck_reg>; + }; + + pp1800_dpbrdg: regulator-1v8-dpbrdg { + compatible = "regulator-fixed"; + regulator-name = "pp1800_dpbrdg"; + pinctrl-names = "default"; + pinctrl-0 = <&pp1800_dpbrdg_en_pins>; + enable-active-high; + regulator-boot-on; + gpio = <&pio 126 GPIO_ACTIVE_HIGH>; + vin-supply = <&mt6359_vio18_ldo_reg>; + }; + /* system wide LDO 1.8V power rail */ pp1800_ldo_g: regulator-1v8-g { compatible = "regulator-fixed"; @@ -34,6 +94,28 @@ vin-supply = <&pp3300_g>; }; + pp1800_mipibrdg: regulator-1v8-mipibrdg { + compatible = "regulator-fixed"; + regulator-name = "pp1800_mipibrdg"; + pinctrl-names = "default"; + pinctrl-0 = <&pp1800_mipibrdg_en_pins>; + enable-active-high; + regulator-boot-on; + gpio = <&pio 128 GPIO_ACTIVE_HIGH>; + vin-supply = <&mt6359_vio18_ldo_reg>; + }; + + pp3300_dpbrdg: regulator-3v3-dpbrdg { + compatible = "regulator-fixed"; + regulator-name = "pp3300_dpbrdg"; + pinctrl-names = "default"; + pinctrl-0 = <&pp3300_dpbrdg_en_pins>; + enable-active-high; + regulator-boot-on; + gpio = <&pio 26 GPIO_ACTIVE_HIGH>; + vin-supply = <&pp3300_g>; + }; + /* system wide switching 3.3V power rail */ pp3300_g: regulator-3v3-g { compatible = "regulator-fixed"; @@ -56,6 +138,17 @@ vin-supply = <&ppvar_sys>; }; + pp3300_mipibrdg: regulator-3v3-mipibrdg { + compatible = "regulator-fixed"; + regulator-name = "pp3300_mipibrdg"; + pinctrl-names = "default"; + pinctrl-0 = <&pp3300_mipibrdg_en_pins>; + enable-active-high; + regulator-boot-on; + gpio = <&pio 127 GPIO_ACTIVE_HIGH>; + vin-supply = <&pp3300_g>; + }; + /* separately switched 3.3V power rail */ pp3300_u: regulator-3v3-u { compatible = "regulator-fixed"; @@ -116,6 +209,70 @@ reg = <0 0xc0000000 0 0x4000000>; }; }; + + sound: sound { + mediatek,platform = <&afe>; + pinctrl-names = "aud_clk_mosi_off", + "aud_clk_mosi_on", + "aud_dat_mosi_off", + "aud_dat_mosi_on", + "aud_dat_miso_off", + "aud_dat_miso_on", + "vow_dat_miso_off", + "vow_dat_miso_on", + "vow_clk_miso_off", + "vow_clk_miso_on", + "aud_nle_mosi_off", + "aud_nle_mosi_on", + "aud_dat_miso2_off", + "aud_dat_miso2_on", + "aud_gpio_i2s3_off", + "aud_gpio_i2s3_on", + "aud_gpio_i2s8_off", + "aud_gpio_i2s8_on", + "aud_gpio_i2s9_off", + "aud_gpio_i2s9_on", + "aud_dat_mosi_ch34_off", + "aud_dat_mosi_ch34_on", + "aud_dat_miso_ch34_off", + "aud_dat_miso_ch34_on", + "aud_gpio_tdm_off", + "aud_gpio_tdm_on"; + pinctrl-0 = <&aud_clk_mosi_off_pins>; + pinctrl-1 = <&aud_clk_mosi_on_pins>; + pinctrl-2 = <&aud_dat_mosi_off_pins>; + pinctrl-3 = <&aud_dat_mosi_on_pins>; + pinctrl-4 = <&aud_dat_miso_off_pins>; + pinctrl-5 = <&aud_dat_miso_on_pins>; + pinctrl-6 = <&vow_dat_miso_off_pins>; + pinctrl-7 = <&vow_dat_miso_on_pins>; + pinctrl-8 = <&vow_clk_miso_off_pins>; + pinctrl-9 = <&vow_clk_miso_on_pins>; + pinctrl-10 = <&aud_nle_mosi_off_pins>; + pinctrl-11 = <&aud_nle_mosi_on_pins>; + pinctrl-12 = <&aud_dat_miso2_off_pins>; + pinctrl-13 = <&aud_dat_miso2_on_pins>; + pinctrl-14 = <&aud_gpio_i2s3_off_pins>; + pinctrl-15 = <&aud_gpio_i2s3_on_pins>; + pinctrl-16 = <&aud_gpio_i2s8_off_pins>; + pinctrl-17 = <&aud_gpio_i2s8_on_pins>; + pinctrl-18 = <&aud_gpio_i2s9_off_pins>; + pinctrl-19 = <&aud_gpio_i2s9_on_pins>; + pinctrl-20 = <&aud_dat_mosi_ch34_off_pins>; + pinctrl-21 = <&aud_dat_mosi_ch34_on_pins>; + pinctrl-22 = <&aud_dat_miso_ch34_off_pins>; + pinctrl-23 = <&aud_dat_miso_ch34_on_pins>; + pinctrl-24 = <&aud_gpio_tdm_off_pins>; + pinctrl-25 = <&aud_gpio_tdm_on_pins>; + }; +}; + +&dsi0 { + status = "okay"; +}; + +&dsi_out { + remote-endpoint = <&anx7625_in>; }; &i2c0 { @@ -166,6 +323,53 @@ clock-frequency = <400000>; pinctrl-names = "default"; pinctrl-0 = <&i2c3_pins>; + + anx_bridge: anx7625@58 { + compatible = "analogix,anx7625"; + reg = <0x58>; + pinctrl-names = "default"; + pinctrl-0 = <&anx7625_pins>; + enable-gpios = <&pio 41 GPIO_ACTIVE_HIGH>; + reset-gpios = <&pio 42 GPIO_ACTIVE_HIGH>; + vdd10-supply = <&pp1000_mipibrdg>; + vdd18-supply = <&pp1800_mipibrdg>; + vdd33-supply = <&pp3300_mipibrdg>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + anx7625_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + + port@1 { + reg = <1>; + + anx7625_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + + aux-bus { + panel: panel { + compatible = "edp-panel"; + power-supply = <&pp3300_mipibrdg>; + backlight = <&backlight_lcd0>; + + port { + panel_in: endpoint { + remote-endpoint = <&anx7625_out>; + }; + }; + }; + }; + }; }; &i2c7 { @@ -176,6 +380,10 @@ pinctrl-0 = <&i2c7_pins>; }; +&mipi_tx0 { + status = "okay"; +}; + &mmc0 { status = "okay"; @@ -507,6 +715,179 @@ "AUD_DAT_MISO0", "AUD_DAT_MISO1"; + anx7625_pins: anx7625-default-pins { + pins-out { + pinmux = <PINMUX_GPIO41__FUNC_GPIO41>, + <PINMUX_GPIO42__FUNC_GPIO42>; + output-low; + }; + + pins-in { + pinmux = <PINMUX_GPIO6__FUNC_GPIO6>; + input-enable; + bias-pull-up; + }; + }; + + aud_clk_mosi_off_pins: aud-clk-mosi-off-pins { + pins-mosi-off { + pinmux = <PINMUX_GPIO214__FUNC_GPIO214>, + <PINMUX_GPIO215__FUNC_GPIO215>; + }; + }; + + aud_clk_mosi_on_pins: aud-clk-mosi-on-pins { + pins-mosi-on { + pinmux = <PINMUX_GPIO214__FUNC_AUD_CLK_MOSI>, + <PINMUX_GPIO215__FUNC_AUD_SYNC_MOSI>; + drive-strength = <10>; + }; + }; + + aud_dat_miso_ch34_off_pins: aud-dat-miso-ch34-off-pins { + pins-miso-off { + pinmux = <PINMUX_GPIO199__FUNC_GPIO199>; + }; + }; + + aud_dat_miso_ch34_on_pins: aud-dat-miso-ch34-on-pins { + pins-miso-on { + pinmux = <PINMUX_GPIO199__FUNC_AUD_DAT_MISO2>; + }; + }; + + aud_dat_miso_off_pins: aud-dat-miso-off-pins { + pins-miso-off { + pinmux = <PINMUX_GPIO218__FUNC_GPIO218>, + <PINMUX_GPIO219__FUNC_GPIO219>; + }; + }; + + aud_dat_miso_on_pins: aud-dat-miso-on-pins { + pins-miso-on { + pinmux = <PINMUX_GPIO218__FUNC_AUD_DAT_MISO0>, + <PINMUX_GPIO219__FUNC_AUD_DAT_MISO1>; + drive-strength = <10>; + }; + }; + + aud_dat_miso2_off_pins: aud-dat-miso2-off-pins { + pins-miso-off { + pinmux = <PINMUX_GPIO199__FUNC_GPIO199>; + }; + }; + + aud_dat_miso2_on_pins: aud-dat-miso2-on-pins { + pins-miso-on { + pinmux = <PINMUX_GPIO199__FUNC_AUD_DAT_MISO2>; + }; + }; + + aud_dat_mosi_ch34_off_pins: aud-dat-mosi-ch34-off-pins { + pins-mosi-off { + pinmux = <PINMUX_GPIO196__FUNC_GPIO196>; + }; + }; + + aud_dat_mosi_ch34_on_pins: aud-dat-mosi-ch34-on-pins { + pins-mosi-on { + pinmux = <PINMUX_GPIO196__FUNC_AUD_DAT_MOSI2>; + }; + }; + + aud_dat_mosi_off_pins: aud-dat-mosi-off-pins { + pins-mosi-off { + pinmux = <PINMUX_GPIO216__FUNC_GPIO216>, + <PINMUX_GPIO217__FUNC_GPIO217>; + }; + }; + + aud_dat_mosi_on_pins: aud-dat-mosi-on-pins { + pins-mosi-on { + pinmux = <PINMUX_GPIO216__FUNC_AUD_DAT_MOSI0>, + <PINMUX_GPIO217__FUNC_AUD_DAT_MOSI1>; + drive-strength = <10>; + }; + }; + + aud_gpio_i2s3_off_pins: aud-gpio-i2s3-off-pins { + pins-i2s3-off { + pinmux = <PINMUX_GPIO32__FUNC_GPIO32>, + <PINMUX_GPIO33__FUNC_GPIO33>, + <PINMUX_GPIO35__FUNC_GPIO35>; + }; + }; + + aud_gpio_i2s3_on_pins: aud-gpio-i2s3-on-pins { + pins-i2s3-on { + pinmux = <PINMUX_GPIO32__FUNC_I2S3_BCK>, + <PINMUX_GPIO33__FUNC_I2S3_LRCK>, + <PINMUX_GPIO35__FUNC_I2S3_DO>; + }; + }; + + aud_gpio_i2s8_off_pins: aud-gpio-i2s8-off-pins { + pins-i2s8-off { + pinmux = <PINMUX_GPIO10__FUNC_GPIO10>, + <PINMUX_GPIO11__FUNC_GPIO11>, + <PINMUX_GPIO12__FUNC_GPIO12>, + <PINMUX_GPIO13__FUNC_GPIO13>; + }; + }; + + aud_gpio_i2s8_on_pins: aud-gpio-i2s8-on-pins { + pins-i2s8-on { + pinmux = <PINMUX_GPIO10__FUNC_I2S8_MCK>, + <PINMUX_GPIO11__FUNC_I2S8_BCK>, + <PINMUX_GPIO12__FUNC_I2S8_LRCK>, + <PINMUX_GPIO13__FUNC_I2S8_DI>; + }; + }; + + aud_gpio_i2s9_off_pins: aud-gpio-i2s9-off-pins { + pins-i2s9-off { + pinmux = <PINMUX_GPIO29__FUNC_GPIO29>; + }; + }; + + aud_gpio_i2s9_on_pins: aud-gpio-i2s9-on-pins { + pins-i2s9-on { + pinmux = <PINMUX_GPIO29__FUNC_I2S9_DO>; + }; + }; + + aud_gpio_tdm_off_pins: aud-gpio-tdm-off-pins { + pins-tdm-off { + pinmux = <PINMUX_GPIO0__FUNC_GPIO0>, + <PINMUX_GPIO1__FUNC_GPIO1>, + <PINMUX_GPIO2__FUNC_GPIO2>, + <PINMUX_GPIO3__FUNC_GPIO3>; + }; + }; + + aud_gpio_tdm_on_pins: aud-gpio-tdm-on-pins { + pins-tdm-on { + pinmux = <PINMUX_GPIO0__FUNC_TDM_LRCK>, + <PINMUX_GPIO1__FUNC_TDM_BCK>, + <PINMUX_GPIO2__FUNC_TDM_MCK>, + <PINMUX_GPIO3__FUNC_TDM_DATA0>; + }; + }; + + aud_nle_mosi_off_pins: aud-nle-mosi-off-pins { + pins-nle-mosi-off { + pinmux = <PINMUX_GPIO197__FUNC_GPIO197>, + <PINMUX_GPIO198__FUNC_GPIO198>; + }; + }; + + aud_nle_mosi_on_pins: aud-nle-mosi-on-pins { + pins-nle-mosi-on { + pinmux = <PINMUX_GPIO197__FUNC_AUD_NLE_MOSI1>, + <PINMUX_GPIO198__FUNC_AUD_NLE_MOSI0>; + }; + }; + cr50_int: cr50-irq-default-pins { pins-gsc-ap-int-odl { pinmux = <PINMUX_GPIO171__FUNC_GPIO171>; @@ -719,6 +1100,48 @@ }; }; + pp1000_dpbrdg_en_pins: pp1000-dpbrdg-en-pins { + pins-en { + pinmux = <PINMUX_GPIO19__FUNC_GPIO19>; + output-low; + }; + }; + + pp1000_mipibrdg_en_pins: pp1000-mipibrdg-en-pins { + pins-en { + pinmux = <PINMUX_GPIO129__FUNC_GPIO129>; + output-low; + }; + }; + + pp1800_dpbrdg_en_pins: pp1800-dpbrdg-en-pins { + pins-en { + pinmux = <PINMUX_GPIO126__FUNC_GPIO126>; + output-low; + }; + }; + + pp1800_mipibrdg_en_pins: pp1800-mipibrd-en-pins { + pins-en { + pinmux = <PINMUX_GPIO128__FUNC_GPIO128>; + output-low; + }; + }; + + pp3300_dpbrdg_en_pins: pp3300-dpbrdg-en-pins { + pins-en { + pinmux = <PINMUX_GPIO26__FUNC_GPIO26>; + output-low; + }; + }; + + pp3300_mipibrdg_en_pins: pp3300-mipibrdg-en-pins { + pins-en { + pinmux = <PINMUX_GPIO127__FUNC_GPIO127>; + output-low; + }; + }; + pp3300_wlan_pins: pp3300-wlan-pins { pins-pcie-en-pp3300-wlan { pinmux = <PINMUX_GPIO143__FUNC_GPIO143>; @@ -726,6 +1149,17 @@ }; }; + pwm0_pins: pwm0-default-pins { + pins-pwm { + pinmux = <PINMUX_GPIO40__FUNC_DISP_PWM>; + }; + + pins-inhibit { + pinmux = <PINMUX_GPIO152__FUNC_GPIO152>; + output-high; + }; + }; + scp_pins: scp-pins { pins-vreq-vao { pinmux = <PINMUX_GPIO195__FUNC_SCP_VREQ_VAO>; @@ -781,12 +1215,43 @@ output-low; }; }; + + vow_clk_miso_off_pins: vow-clk-miso-off-pins { + pins-miso-off { + pinmux = <PINMUX_GPIO219__FUNC_GPIO219>; + }; + }; + + vow_clk_miso_on_pins: vow-clk-miso-on-pins { + pins-miso-on { + pinmux = <PINMUX_GPIO219__FUNC_VOW_CLK_MISO>; + }; + }; + + vow_dat_miso_off_pins: vow-dat-miso-off-pins { + pins-miso-off { + pinmux = <PINMUX_GPIO218__FUNC_GPIO218>; + }; + }; + + vow_dat_miso_on_pins: vow-dat-miso-on-pins { + pins-miso-on { + pinmux = <PINMUX_GPIO218__FUNC_VOW_DAT_MISO>; + }; + }; }; &pmic { interrupts-extended = <&pio 214 IRQ_TYPE_LEVEL_HIGH>; }; +&pwm0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pins>; +}; + &scp { status = "okay"; diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi index 424fc89cc6f7..87b91c8feaf9 100644 --- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi @@ -29,6 +29,15 @@ rdma4 = &rdma4; }; + clk13m: fixed-factor-clock-13m { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&clk26m>; + clock-div = <2>; + clock-mult = <1>; + clock-output-names = "clk13m"; + }; + clk26m: oscillator0 { compatible = "fixed-clock"; #clock-cells = <0>; @@ -53,7 +62,13 @@ reg = <0x000>; enable-method = "psci"; clock-frequency = <1701000000>; - cpu-idle-states = <&cpu_sleep_l &cluster_sleep_l>; + cpu-idle-states = <&cpu_ret_l &cpu_off_l>; + i-cache-size = <32768>; + i-cache-line-size = <64>; + i-cache-sets = <128>; + d-cache-size = <32768>; + d-cache-line-size = <64>; + d-cache-sets = <128>; next-level-cache = <&l2_0>; capacity-dmips-mhz = <530>; }; @@ -64,7 +79,13 @@ reg = <0x100>; enable-method = "psci"; clock-frequency = <1701000000>; - cpu-idle-states = <&cpu_sleep_l &cluster_sleep_l>; + cpu-idle-states = <&cpu_ret_l &cpu_off_l>; + i-cache-size = <32768>; + i-cache-line-size = <64>; + i-cache-sets = <128>; + d-cache-size = <32768>; + d-cache-line-size = <64>; + d-cache-sets = <128>; next-level-cache = <&l2_0>; capacity-dmips-mhz = <530>; }; @@ -75,7 +96,13 @@ reg = <0x200>; enable-method = "psci"; clock-frequency = <1701000000>; - cpu-idle-states = <&cpu_sleep_l &cluster_sleep_l>; + cpu-idle-states = <&cpu_ret_l &cpu_off_l>; + i-cache-size = <32768>; + i-cache-line-size = <64>; + i-cache-sets = <128>; + d-cache-size = <32768>; + d-cache-line-size = <64>; + d-cache-sets = <128>; next-level-cache = <&l2_0>; capacity-dmips-mhz = <530>; }; @@ -86,7 +113,13 @@ reg = <0x300>; enable-method = "psci"; clock-frequency = <1701000000>; - cpu-idle-states = <&cpu_sleep_l &cluster_sleep_l>; + cpu-idle-states = <&cpu_ret_l &cpu_off_l>; + i-cache-size = <32768>; + i-cache-line-size = <64>; + i-cache-sets = <128>; + d-cache-size = <32768>; + d-cache-line-size = <64>; + d-cache-sets = <128>; next-level-cache = <&l2_0>; capacity-dmips-mhz = <530>; }; @@ -97,7 +130,13 @@ reg = <0x400>; enable-method = "psci"; clock-frequency = <2171000000>; - cpu-idle-states = <&cpu_sleep_b &cluster_sleep_b>; + cpu-idle-states = <&cpu_ret_b &cpu_off_b>; + i-cache-size = <65536>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <65536>; + d-cache-line-size = <64>; + d-cache-sets = <256>; next-level-cache = <&l2_1>; capacity-dmips-mhz = <1024>; }; @@ -108,7 +147,13 @@ reg = <0x500>; enable-method = "psci"; clock-frequency = <2171000000>; - cpu-idle-states = <&cpu_sleep_b &cluster_sleep_b>; + cpu-idle-states = <&cpu_ret_b &cpu_off_b>; + i-cache-size = <65536>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <65536>; + d-cache-line-size = <64>; + d-cache-sets = <256>; next-level-cache = <&l2_1>; capacity-dmips-mhz = <1024>; }; @@ -119,7 +164,13 @@ reg = <0x600>; enable-method = "psci"; clock-frequency = <2171000000>; - cpu-idle-states = <&cpu_sleep_b &cluster_sleep_b>; + cpu-idle-states = <&cpu_ret_b &cpu_off_b>; + i-cache-size = <65536>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <65536>; + d-cache-line-size = <64>; + d-cache-sets = <256>; next-level-cache = <&l2_1>; capacity-dmips-mhz = <1024>; }; @@ -130,7 +181,13 @@ reg = <0x700>; enable-method = "psci"; clock-frequency = <2171000000>; - cpu-idle-states = <&cpu_sleep_b &cluster_sleep_b>; + cpu-idle-states = <&cpu_ret_b &cpu_off_b>; + i-cache-size = <65536>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <65536>; + d-cache-line-size = <64>; + d-cache-sets = <256>; next-level-cache = <&l2_1>; capacity-dmips-mhz = <1024>; }; @@ -149,19 +206,16 @@ core3 { cpu = <&cpu3>; }; - }; - - cluster1 { - core0 { + core4 { cpu = <&cpu4>; }; - core1 { + core5 { cpu = <&cpu5>; }; - core2 { + core6 { cpu = <&cpu6>; }; - core3 { + core7 { cpu = <&cpu7>; }; }; @@ -170,23 +224,33 @@ l2_0: l2-cache0 { compatible = "cache"; cache-level = <2>; + cache-size = <131072>; + cache-line-size = <64>; + cache-sets = <512>; next-level-cache = <&l3_0>; }; l2_1: l2-cache1 { compatible = "cache"; cache-level = <2>; + cache-size = <262144>; + cache-line-size = <64>; + cache-sets = <512>; next-level-cache = <&l3_0>; }; l3_0: l3-cache { compatible = "cache"; cache-level = <3>; + cache-size = <2097152>; + cache-line-size = <64>; + cache-sets = <2048>; + cache-unified; }; idle-states { entry-method = "psci"; - cpu_sleep_l: cpu-sleep-l { + cpu_ret_l: cpu-retention-l { compatible = "arm,idle-state"; arm,psci-suspend-param = <0x00010001>; local-timer-stop; @@ -194,7 +258,7 @@ exit-latency-us = <140>; min-residency-us = <780>; }; - cpu_sleep_b: cpu-sleep-b { + cpu_ret_b: cpu-retention-b { compatible = "arm,idle-state"; arm,psci-suspend-param = <0x00010001>; local-timer-stop; @@ -202,7 +266,7 @@ exit-latency-us = <145>; min-residency-us = <720>; }; - cluster_sleep_l: cluster-sleep-l { + cpu_off_l: cpu-off-l { compatible = "arm,idle-state"; arm,psci-suspend-param = <0x01010002>; local-timer-stop; @@ -210,7 +274,7 @@ exit-latency-us = <155>; min-residency-us = <860>; }; - cluster_sleep_b: cluster-sleep-b { + cpu_off_b: cpu-off-b { compatible = "arm,idle-state"; arm,psci-suspend-param = <0x01010002>; local-timer-stop; @@ -534,8 +598,7 @@ "mediatek,mt6765-timer"; reg = <0 0x10017000 0 0x1000>; interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&topckgen CLK_TOP_CSW_F26M_D2>; - clock-names = "clk13m"; + clocks = <&clk13m>; }; pwrap: pwrap@10026000 { @@ -578,6 +641,8 @@ compatible = "mediatek,mt8192-scp_adsp"; reg = <0 0x10720000 0 0x1000>; #clock-cells = <1>; + /* power domain dependency not upstreamed */ + status = "fail"; }; uart0: serial@11002000 { diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r1.dts b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r1.dts index 3348ba69ff6c..2d5e8f371b6d 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r1.dts +++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r1.dts @@ -10,6 +10,16 @@ compatible = "google,tomato-rev1", "google,tomato", "mediatek,mt8195"; }; +&audio_codec { + compatible = "realtek,rt5682i"; + realtek,btndet-delay = <16>; +}; + +&sound { + compatible = "mediatek,mt8195_mt6359_rt1019_rt5682"; + model = "mt8195_r1019_5682"; +}; + &ts_10 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts index 4669e9d917f8..2586c32ce6e6 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts +++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts @@ -10,6 +10,11 @@ compatible = "google,tomato-rev2", "google,tomato", "mediatek,mt8195"; }; +&audio_codec { + compatible = "realtek,rt5682i"; + realtek,btndet-delay = <16>; +}; + &pio_default { pins-low-power-hdmi-disable { pinmux = <PINMUX_GPIO31__FUNC_GPIO31>, @@ -30,6 +35,11 @@ }; }; +&sound { + compatible = "mediatek,mt8195_mt6359_rt1019_rt5682"; + model = "mt8195_r1019_5682"; +}; + &ts_10 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r3.dts b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r3.dts index 5021edd02f7c..f54f9477b99d 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r3.dts +++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r3.dts @@ -11,6 +11,11 @@ "google,tomato", "mediatek,mt8195"; }; +&audio_codec { + compatible = "realtek,rt5682s"; + realtek,amic-delay-ms = <250>; +}; + &pio_default { pins-low-power-hdmi-disable { pinmux = <PINMUX_GPIO31__FUNC_GPIO31>, @@ -31,6 +36,11 @@ }; }; +&sound { + compatible = "mediatek,mt8195_mt6359_rt1019_rt5682"; + model = "m8195_r1019_5682s"; +}; + &ts_10 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi index 560103e29017..56749cfe7c33 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi @@ -26,6 +26,12 @@ stdout-path = "serial0:115200n8"; }; + dmic-codec { + compatible = "dmic-codec"; + num-channels = <2>; + wakeup-delay-ms = <50>; + }; + memory@40000000 { device_type = "memory"; reg = <0 0x40000000 0 0x80000000>; @@ -117,9 +123,49 @@ reg = <0 0x50000000 0 0x2900000>; no-map; }; + + adsp_mem: memory@60000000 { + compatible = "shared-dma-pool"; + reg = <0 0x60000000 0 0xd80000>; + no-map; + }; + + afe_mem: memory@60d80000 { + compatible = "shared-dma-pool"; + reg = <0 0x60d80000 0 0x100000>; + no-map; + }; + + adsp_device_mem: memory@60e80000 { + compatible = "shared-dma-pool"; + reg = <0 0x60e80000 0 0x280000>; + no-map; + }; + }; + + spk_amplifier: rt1019p { + compatible = "realtek,rt1019p"; + label = "rt1019p"; + pinctrl-names = "default"; + pinctrl-0 = <&rt1019p_pins_default>; + sdb-gpios = <&pio 100 GPIO_ACTIVE_HIGH>; }; }; +&adsp { + status = "okay"; + + memory-region = <&adsp_device_mem>, <&adsp_mem>; +}; + +&afe { + status = "okay"; + + mediatek,etdm-in2-cowork-source = <2>; + mediatek,etdm-out2-cowork-source = <0>; + memory-region = <&afe_mem>; +}; + &dp_intf0 { status = "okay"; @@ -225,6 +271,17 @@ clock-frequency = <400000>; pinctrl-names = "default"; pinctrl-0 = <&i2c2_pins>; + + audio_codec: codec@1a { + /* Realtek RT5682i or RT5682s, sharing the same configuration */ + reg = <0x1a>; + interrupts-extended = <&pio 89 IRQ_TYPE_EDGE_BOTH>; + realtek,jd-src = <1>; + + AVDD-supply = <&mt6359_vio18_ldo_reg>; + MICVDD-supply = <&pp3300_z2>; + VBAT-supply = <&pp3300_z5>; + }; }; &i2c3 { @@ -329,6 +386,11 @@ vqmmc-supply = <&mt_pmic_vmc_ldo_reg>; }; +&mt6359codec { + mediatek,dmic-mode = <1>; /* one-wire */ + mediatek,mic-type-0 = <2>; /* DMIC */ +}; + /* for CPU-L */ &mt6359_vcore_buck_reg { regulator-always-on; @@ -536,6 +598,34 @@ "AP_SPI_FLASH_MOSI", "AP_SPI_FLASH_MISO"; + aud_pins_default: audio-default-pins { + pins-cmd-dat { + pinmux = <PINMUX_GPIO69__FUNC_AUD_CLK_MOSI>, + <PINMUX_GPIO70__FUNC_AUD_SYNC_MOSI>, + <PINMUX_GPIO71__FUNC_AUD_DAT_MOSI0>, + <PINMUX_GPIO72__FUNC_AUD_DAT_MOSI1>, + <PINMUX_GPIO73__FUNC_AUD_DAT_MISO0>, + <PINMUX_GPIO74__FUNC_AUD_DAT_MISO1>, + <PINMUX_GPIO75__FUNC_AUD_DAT_MISO2>, + <PINMUX_GPIO0__FUNC_TDMIN_MCK>, + <PINMUX_GPIO1__FUNC_TDMIN_DI>, + <PINMUX_GPIO2__FUNC_TDMIN_LRCK>, + <PINMUX_GPIO3__FUNC_TDMIN_BCK>, + <PINMUX_GPIO60__FUNC_I2SO2_D0>, + <PINMUX_GPIO49__FUNC_I2SIN_D0>, + <PINMUX_GPIO50__FUNC_I2SO1_MCK>, + <PINMUX_GPIO51__FUNC_I2SO1_BCK>, + <PINMUX_GPIO52__FUNC_I2SO1_WS>, + <PINMUX_GPIO53__FUNC_I2SO1_D0>; + }; + + pins-hp-jack-int-odl { + pinmux = <PINMUX_GPIO89__FUNC_GPIO89>; + input-enable; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; + cr50_int: cr50-irq-default-pins { pins-gsc-ap-int-odl { pinmux = <PINMUX_GPIO88__FUNC_GPIO88>; @@ -777,6 +867,13 @@ }; }; + rt1019p_pins_default: rt1019p-default-pins { + pins-amp-sdb { + pinmux = <PINMUX_GPIO100__FUNC_GPIO100>; + output-low; + }; + }; + scp_pins: scp-default-pins { pins-vreq { pinmux = <PINMUX_GPIO76__FUNC_SCP_VREQ_VAO>; @@ -850,6 +947,18 @@ }; }; +&sound { + status = "okay"; + + mediatek,adsp = <&adsp>; + mediatek,dai-link = + "DL10_FE", "DPTX_BE", "ETDM1_IN_BE", "ETDM2_IN_BE", + "ETDM1_OUT_BE", "ETDM2_OUT_BE","UL_SRC1_BE", + "AFE_SOF_DL2", "AFE_SOF_DL3", "AFE_SOF_UL4", "AFE_SOF_UL5"; + pinctrl-names = "default"; + pinctrl-0 = <&aud_pins_default>; +}; + &spi0 { status = "okay"; diff --git a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts index dec85d254838..b2485ddfd33b 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts +++ b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts @@ -78,6 +78,23 @@ }; }; +ð { + phy-mode ="rgmii-id"; + phy-handle = <ðernet_phy0>; + snps,reset-gpio = <&pio 93 GPIO_ACTIVE_HIGH>; + snps,reset-delays-us = <0 10000 80000>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <ð_default_pins>; + pinctrl-1 = <ð_sleep_pins>; + status = "okay"; + + mdio { + ethernet_phy0: ethernet-phy@1 { + reg = <0x1>; + }; + }; +}; + &i2c6 { clock-frequency = <400000>; pinctrl-0 = <&i2c6_pins>; @@ -258,6 +275,66 @@ }; &pio { + eth_default_pins: eth-default-pins { + pins-txd { + pinmux = <PINMUX_GPIO77__FUNC_GBE_TXD3>, + <PINMUX_GPIO78__FUNC_GBE_TXD2>, + <PINMUX_GPIO79__FUNC_GBE_TXD1>, + <PINMUX_GPIO80__FUNC_GBE_TXD0>; + drive-strength = <MTK_DRIVE_8mA>; + }; + pins-cc { + pinmux = <PINMUX_GPIO85__FUNC_GBE_TXC>, + <PINMUX_GPIO88__FUNC_GBE_TXEN>, + <PINMUX_GPIO87__FUNC_GBE_RXDV>, + <PINMUX_GPIO86__FUNC_GBE_RXC>; + drive-strength = <MTK_DRIVE_8mA>; + }; + pins-rxd { + pinmux = <PINMUX_GPIO81__FUNC_GBE_RXD3>, + <PINMUX_GPIO82__FUNC_GBE_RXD2>, + <PINMUX_GPIO83__FUNC_GBE_RXD1>, + <PINMUX_GPIO84__FUNC_GBE_RXD0>; + }; + pins-mdio { + pinmux = <PINMUX_GPIO89__FUNC_GBE_MDC>, + <PINMUX_GPIO90__FUNC_GBE_MDIO>; + input-enable; + }; + pins-power { + pinmux = <PINMUX_GPIO91__FUNC_GPIO91>, + <PINMUX_GPIO92__FUNC_GPIO92>; + output-high; + }; + }; + + eth_sleep_pins: eth-sleep-pins { + pins-txd { + pinmux = <PINMUX_GPIO77__FUNC_GPIO77>, + <PINMUX_GPIO78__FUNC_GPIO78>, + <PINMUX_GPIO79__FUNC_GPIO79>, + <PINMUX_GPIO80__FUNC_GPIO80>; + }; + pins-cc { + pinmux = <PINMUX_GPIO85__FUNC_GPIO85>, + <PINMUX_GPIO88__FUNC_GPIO88>, + <PINMUX_GPIO87__FUNC_GPIO87>, + <PINMUX_GPIO86__FUNC_GPIO86>; + }; + pins-rxd { + pinmux = <PINMUX_GPIO81__FUNC_GPIO81>, + <PINMUX_GPIO82__FUNC_GPIO82>, + <PINMUX_GPIO83__FUNC_GPIO83>, + <PINMUX_GPIO84__FUNC_GPIO84>; + }; + pins-mdio { + pinmux = <PINMUX_GPIO89__FUNC_GPIO89>, + <PINMUX_GPIO90__FUNC_GPIO90>; + input-disable; + bias-disable; + }; + }; + gpio_keys_pins: gpio-keys-pins { pins { pinmux = <PINMUX_GPIO106__FUNC_GPIO106>; diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi index 5d31536f4c48..8f1264d5290b 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi @@ -38,7 +38,13 @@ performance-domains = <&performance 0>; clock-frequency = <1701000000>; capacity-dmips-mhz = <308>; - cpu-idle-states = <&cpu_off_l &cluster_off_l>; + cpu-idle-states = <&cpu_ret_l &cpu_off_l>; + i-cache-size = <32768>; + i-cache-line-size = <64>; + i-cache-sets = <128>; + d-cache-size = <32768>; + d-cache-line-size = <64>; + d-cache-sets = <128>; next-level-cache = <&l2_0>; #cooling-cells = <2>; }; @@ -51,7 +57,13 @@ performance-domains = <&performance 0>; clock-frequency = <1701000000>; capacity-dmips-mhz = <308>; - cpu-idle-states = <&cpu_off_l &cluster_off_l>; + cpu-idle-states = <&cpu_ret_l &cpu_off_l>; + i-cache-size = <32768>; + i-cache-line-size = <64>; + i-cache-sets = <128>; + d-cache-size = <32768>; + d-cache-line-size = <64>; + d-cache-sets = <128>; next-level-cache = <&l2_0>; #cooling-cells = <2>; }; @@ -64,7 +76,13 @@ performance-domains = <&performance 0>; clock-frequency = <1701000000>; capacity-dmips-mhz = <308>; - cpu-idle-states = <&cpu_off_l &cluster_off_l>; + cpu-idle-states = <&cpu_ret_l &cpu_off_l>; + i-cache-size = <32768>; + i-cache-line-size = <64>; + i-cache-sets = <128>; + d-cache-size = <32768>; + d-cache-line-size = <64>; + d-cache-sets = <128>; next-level-cache = <&l2_0>; #cooling-cells = <2>; }; @@ -77,7 +95,13 @@ performance-domains = <&performance 0>; clock-frequency = <1701000000>; capacity-dmips-mhz = <308>; - cpu-idle-states = <&cpu_off_l &cluster_off_l>; + cpu-idle-states = <&cpu_ret_l &cpu_off_l>; + i-cache-size = <32768>; + i-cache-line-size = <64>; + i-cache-sets = <128>; + d-cache-size = <32768>; + d-cache-line-size = <64>; + d-cache-sets = <128>; next-level-cache = <&l2_0>; #cooling-cells = <2>; }; @@ -90,7 +114,13 @@ performance-domains = <&performance 1>; clock-frequency = <2171000000>; capacity-dmips-mhz = <1024>; - cpu-idle-states = <&cpu_off_b &cluster_off_b>; + cpu-idle-states = <&cpu_ret_b &cpu_off_b>; + i-cache-size = <65536>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <65536>; + d-cache-line-size = <64>; + d-cache-sets = <256>; next-level-cache = <&l2_1>; #cooling-cells = <2>; }; @@ -103,7 +133,13 @@ performance-domains = <&performance 1>; clock-frequency = <2171000000>; capacity-dmips-mhz = <1024>; - cpu-idle-states = <&cpu_off_b &cluster_off_b>; + cpu-idle-states = <&cpu_ret_b &cpu_off_b>; + i-cache-size = <65536>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <65536>; + d-cache-line-size = <64>; + d-cache-sets = <256>; next-level-cache = <&l2_1>; #cooling-cells = <2>; }; @@ -116,7 +152,13 @@ performance-domains = <&performance 1>; clock-frequency = <2171000000>; capacity-dmips-mhz = <1024>; - cpu-idle-states = <&cpu_off_b &cluster_off_b>; + cpu-idle-states = <&cpu_ret_b &cpu_off_b>; + i-cache-size = <65536>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <65536>; + d-cache-line-size = <64>; + d-cache-sets = <256>; next-level-cache = <&l2_1>; #cooling-cells = <2>; }; @@ -129,7 +171,13 @@ performance-domains = <&performance 1>; clock-frequency = <2171000000>; capacity-dmips-mhz = <1024>; - cpu-idle-states = <&cpu_off_b &cluster_off_b>; + cpu-idle-states = <&cpu_ret_b &cpu_off_b>; + i-cache-size = <65536>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <65536>; + d-cache-line-size = <64>; + d-cache-sets = <256>; next-level-cache = <&l2_1>; #cooling-cells = <2>; }; @@ -151,22 +199,20 @@ core3 { cpu = <&cpu3>; }; - }; - cluster1 { - core0 { + core4 { cpu = <&cpu4>; }; - core1 { + core5 { cpu = <&cpu5>; }; - core2 { + core6 { cpu = <&cpu6>; }; - core3 { + core7 { cpu = <&cpu7>; }; }; @@ -175,7 +221,7 @@ idle-states { entry-method = "psci"; - cpu_off_l: cpu-off-l { + cpu_ret_l: cpu-retention-l { compatible = "arm,idle-state"; arm,psci-suspend-param = <0x00010001>; local-timer-stop; @@ -184,7 +230,7 @@ min-residency-us = <580>; }; - cpu_off_b: cpu-off-b { + cpu_ret_b: cpu-retention-b { compatible = "arm,idle-state"; arm,psci-suspend-param = <0x00010001>; local-timer-stop; @@ -193,7 +239,7 @@ min-residency-us = <740>; }; - cluster_off_l: cluster-off-l { + cpu_off_l: cpu-off-l { compatible = "arm,idle-state"; arm,psci-suspend-param = <0x01010002>; local-timer-stop; @@ -202,7 +248,7 @@ min-residency-us = <840>; }; - cluster_off_b: cluster-off-b { + cpu_off_b: cpu-off-b { compatible = "arm,idle-state"; arm,psci-suspend-param = <0x01010002>; local-timer-stop; @@ -215,18 +261,28 @@ l2_0: l2-cache0 { compatible = "cache"; cache-level = <2>; + cache-size = <131072>; + cache-line-size = <64>; + cache-sets = <512>; next-level-cache = <&l3_0>; }; l2_1: l2-cache1 { compatible = "cache"; cache-level = <2>; + cache-size = <262144>; + cache-line-size = <64>; + cache-sets = <512>; next-level-cache = <&l3_0>; }; l3_0: l3-cache { compatible = "cache"; cache-level = <3>; + cache-size = <2097152>; + cache-line-size = <64>; + cache-sets = <2048>; + cache-unified; }; }; @@ -248,6 +304,15 @@ status = "disabled"; }; + clk13m: fixed-factor-clock-13m { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&clk26m>; + clock-div = <2>; + clock-mult = <1>; + clock-output-names = "clk13m"; + }; + clk26m: oscillator-26m { compatible = "fixed-clock"; #clock-cells = <0>; @@ -687,8 +752,7 @@ }; watchdog: watchdog@10007000 { - compatible = "mediatek,mt8195-wdt", - "mediatek,mt6589-wdt"; + compatible = "mediatek,mt8195-wdt"; mediatek,disable-extrst; reg = <0 0x10007000 0 0x100>; #reset-cells = <1>; @@ -705,7 +769,7 @@ "mediatek,mt6765-timer"; reg = <0 0x10017000 0 0x1000>; interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&topckgen CLK_TOP_CLK26M_D2>; + clocks = <&clk13m>; }; pwrap: pwrap@10024000 { @@ -1046,6 +1110,98 @@ status = "disabled"; }; + eth: ethernet@11021000 { + compatible = "mediatek,mt8195-gmac", "snps,dwmac-5.10a"; + reg = <0 0x11021000 0 0x4000>; + interrupts = <GIC_SPI 716 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "macirq"; + clock-names = "axi", + "apb", + "mac_main", + "ptp_ref", + "rmii_internal", + "mac_cg"; + clocks = <&pericfg_ao CLK_PERI_AO_ETHERNET>, + <&pericfg_ao CLK_PERI_AO_ETHERNET_BUS>, + <&topckgen CLK_TOP_SNPS_ETH_250M>, + <&topckgen CLK_TOP_SNPS_ETH_62P4M_PTP>, + <&topckgen CLK_TOP_SNPS_ETH_50M_RMII>, + <&pericfg_ao CLK_PERI_AO_ETHERNET_MAC>; + assigned-clocks = <&topckgen CLK_TOP_SNPS_ETH_250M>, + <&topckgen CLK_TOP_SNPS_ETH_62P4M_PTP>, + <&topckgen CLK_TOP_SNPS_ETH_50M_RMII>; + assigned-clock-parents = <&topckgen CLK_TOP_ETHPLL_D2>, + <&topckgen CLK_TOP_ETHPLL_D8>, + <&topckgen CLK_TOP_ETHPLL_D10>; + power-domains = <&spm MT8195_POWER_DOMAIN_ETHER>; + mediatek,pericfg = <&infracfg_ao>; + snps,axi-config = <&stmmac_axi_setup>; + snps,mtl-rx-config = <&mtl_rx_setup>; + snps,mtl-tx-config = <&mtl_tx_setup>; + snps,txpbl = <16>; + snps,rxpbl = <16>; + snps,clk-csr = <0>; + status = "disabled"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + }; + + stmmac_axi_setup: stmmac-axi-config { + snps,wr_osr_lmt = <0x7>; + snps,rd_osr_lmt = <0x7>; + snps,blen = <0 0 0 0 16 8 4>; + }; + + mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <4>; + snps,rx-sched-sp; + queue0 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x0>; + }; + queue1 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x0>; + }; + queue2 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x0>; + }; + queue3 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x0>; + }; + }; + + mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <4>; + snps,tx-sched-wrr; + queue0 { + snps,weight = <0x10>; + snps,dcb-algorithm; + snps,priority = <0x0>; + }; + queue1 { + snps,weight = <0x11>; + snps,dcb-algorithm; + snps,priority = <0x1>; + }; + queue2 { + snps,weight = <0x12>; + snps,dcb-algorithm; + snps,priority = <0x2>; + }; + queue3 { + snps,weight = <0x13>; + snps,dcb-algorithm; + snps,priority = <0x3>; + }; + }; + }; + xhci0: usb@11200000 { compatible = "mediatek,mt8195-xhci", "mediatek,mtk-xhci"; @@ -1258,9 +1414,9 @@ clocks = <&infracfg_ao CLK_INFRA_AO_PCIE_PL_P_250M_P1>, <&clk26m>, - <&infracfg_ao CLK_INFRA_AO_PCIE_TL_96M>, + <&infracfg_ao CLK_INFRA_AO_PCIE_P1_TL_96M>, <&clk26m>, - <&infracfg_ao CLK_INFRA_AO_PCIE_PERI_26M>, + <&infracfg_ao CLK_INFRA_AO_PCIE_P1_PERI_26M>, /* Designer has connect pcie1 with peri_mem_p0 clock */ <&pericfg_ao CLK_PERI_AO_PCIE_P0_MEM>; clock-names = "pl_250m", "tl_26m", "tl_96m", @@ -1380,6 +1536,12 @@ dp_calibration: dp-data@1ac { reg = <0x1ac 0x10>; }; + lvts_efuse_data1: lvts1-calib@1bc { + reg = <0x1bc 0x14>; + }; + lvts_efuse_data2: lvts2-calib@1d0 { + reg = <0x1d0 0x38>; + }; }; u3phy2: t-phy@11c40000 { @@ -1549,6 +1711,7 @@ #address-cells = <1>; #size-cells = <1>; ranges = <0 0 0x11e30000 0xe00>; + power-domains = <&spm MT8195_POWER_DOMAIN_SSUSB_PCIE_PHY>; status = "disabled"; u2port1: usb-phy@0 { @@ -2139,6 +2302,66 @@ dma-ranges = <0x1 0x0 0x0 0x40000000 0x0 0xfff00000>; }; + jpgdec-master { + compatible = "mediatek,mt8195-jpgdec"; + power-domains = <&spm MT8195_POWER_DOMAIN_VDEC1>; + iommus = <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA0>, + <&iommu_vdo M4U_PORT_L19_JPGDEC_BSDMA0>, + <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA1>, + <&iommu_vdo M4U_PORT_L19_JPGDEC_BSDMA1>, + <&iommu_vdo M4U_PORT_L19_JPGDEC_BUFF_OFFSET1>, + <&iommu_vdo M4U_PORT_L19_JPGDEC_BUFF_OFFSET0>; + dma-ranges = <0x1 0x0 0x0 0x40000000 0x0 0xfff00000>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + jpgdec@1a040000 { + compatible = "mediatek,mt8195-jpgdec-hw"; + reg = <0 0x1a040000 0 0x10000>;/* JPGDEC_C0 */ + iommus = <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA0>, + <&iommu_vdo M4U_PORT_L19_JPGDEC_BSDMA0>, + <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA1>, + <&iommu_vdo M4U_PORT_L19_JPGDEC_BSDMA1>, + <&iommu_vdo M4U_PORT_L19_JPGDEC_BUFF_OFFSET1>, + <&iommu_vdo M4U_PORT_L19_JPGDEC_BUFF_OFFSET0>; + interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&vencsys CLK_VENC_JPGDEC>; + clock-names = "jpgdec"; + power-domains = <&spm MT8195_POWER_DOMAIN_VDEC0>; + }; + + jpgdec@1a050000 { + compatible = "mediatek,mt8195-jpgdec-hw"; + reg = <0 0x1a050000 0 0x10000>;/* JPGDEC_C1 */ + iommus = <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA0>, + <&iommu_vdo M4U_PORT_L19_JPGDEC_BSDMA0>, + <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA1>, + <&iommu_vdo M4U_PORT_L19_JPGDEC_BSDMA1>, + <&iommu_vdo M4U_PORT_L19_JPGDEC_BUFF_OFFSET1>, + <&iommu_vdo M4U_PORT_L19_JPGDEC_BUFF_OFFSET0>; + interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&vencsys CLK_VENC_JPGDEC_C1>; + clock-names = "jpgdec"; + power-domains = <&spm MT8195_POWER_DOMAIN_VDEC1>; + }; + + jpgdec@1b040000 { + compatible = "mediatek,mt8195-jpgdec-hw"; + reg = <0 0x1b040000 0 0x10000>;/* JPGDEC_C2 */ + iommus = <&iommu_vpp M4U_PORT_L20_JPGDEC_WDMA0>, + <&iommu_vpp M4U_PORT_L20_JPGDEC_BSDMA0>, + <&iommu_vpp M4U_PORT_L20_JPGDEC_WDMA1>, + <&iommu_vpp M4U_PORT_L20_JPGDEC_BSDMA1>, + <&iommu_vpp M4U_PORT_L20_JPGDEC_BUFF_OFFSET1>, + <&iommu_vpp M4U_PORT_L20_JPGDEC_BUFF_OFFSET0>; + interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&vencsys_core1 CLK_VENC_CORE1_JPGDEC>; + clock-names = "jpgdec"; + power-domains = <&spm MT8195_POWER_DOMAIN_VDEC2>; + }; + }; + vencsys_core1: clock-controller@1b000000 { compatible = "mediatek,mt8195-vencsys_core1"; reg = <0 0x1b000000 0 0x1000>; @@ -2146,12 +2369,52 @@ }; vdosys0: syscon@1c01a000 { - compatible = "mediatek,mt8195-mmsys", "syscon"; + compatible = "mediatek,mt8195-vdosys0", "mediatek,mt8195-mmsys", "syscon"; reg = <0 0x1c01a000 0 0x1000>; mboxes = <&gce0 0 CMDQ_THR_PRIO_4>; #clock-cells = <1>; }; + + jpgenc-master { + compatible = "mediatek,mt8195-jpgenc"; + power-domains = <&spm MT8195_POWER_DOMAIN_VENC_CORE1>; + iommus = <&iommu_vpp M4U_PORT_L20_JPGENC_Y_RDMA>, + <&iommu_vpp M4U_PORT_L20_JPGENC_C_RDMA>, + <&iommu_vpp M4U_PORT_L20_JPGENC_Q_TABLE>, + <&iommu_vpp M4U_PORT_L20_JPGENC_BSDMA>; + dma-ranges = <0x1 0x0 0x0 0x40000000 0x0 0xfff00000>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + jpgenc@1a030000 { + compatible = "mediatek,mt8195-jpgenc-hw"; + reg = <0 0x1a030000 0 0x10000>; + iommus = <&iommu_vdo M4U_PORT_L19_JPGENC_Y_RDMA>, + <&iommu_vdo M4U_PORT_L19_JPGENC_C_RDMA>, + <&iommu_vdo M4U_PORT_L19_JPGENC_Q_TABLE>, + <&iommu_vdo M4U_PORT_L19_JPGENC_BSDMA>; + interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&vencsys CLK_VENC_JPGENC>; + clock-names = "jpgenc"; + power-domains = <&spm MT8195_POWER_DOMAIN_VENC>; + }; + + jpgenc@1b030000 { + compatible = "mediatek,mt8195-jpgenc-hw"; + reg = <0 0x1b030000 0 0x10000>; + iommus = <&iommu_vpp M4U_PORT_L20_JPGENC_Y_RDMA>, + <&iommu_vpp M4U_PORT_L20_JPGENC_C_RDMA>, + <&iommu_vpp M4U_PORT_L20_JPGENC_Q_TABLE>, + <&iommu_vpp M4U_PORT_L20_JPGENC_BSDMA>; + interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&vencsys_core1 CLK_VENC_CORE1_JPGENC>; + clock-names = "jpgenc"; + power-domains = <&spm MT8195_POWER_DOMAIN_VENC_CORE1>; + }; + }; + larb20: larb@1b010000 { compatible = "mediatek,mt8195-smi-larb"; reg = <0 0x1b010000 0 0x1000>; @@ -2292,7 +2555,7 @@ }; vdosys1: syscon@1c100000 { - compatible = "mediatek,mt8195-mmsys", "syscon"; + compatible = "mediatek,mt8195-vdosys1", "syscon"; reg = <0 0x1c100000 0 0x1000>; #clock-cells = <1>; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8516.dtsi b/arch/arm64/boot/dts/mediatek/mt8516.dtsi index d1b67c82d761..9cbd6dd8f671 100644 --- a/arch/arm64/boot/dts/mediatek/mt8516.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8516.dtsi @@ -202,7 +202,7 @@ #clock-cells = <1>; }; - toprgu: toprgu@10007000 { + watchdog@10007000 { compatible = "mediatek,mt8516-wdt", "mediatek,mt6589-wdt"; reg = <0 0x10007000 0 0x1000>; @@ -229,7 +229,6 @@ compatible = "mediatek,mt8516-pinctrl"; reg = <0 0x1000b000 0 0x1000>; mediatek,pctl-regmap = <&syscfg_pctl>; - pins-are-numbered; gpio-controller; #gpio-cells = <2>; interrupt-controller; diff --git a/arch/arm64/boot/dts/microchip/sparx5.dtsi b/arch/arm64/boot/dts/microchip/sparx5.dtsi index 2dd5e38820b1..0367a00a269b 100644 --- a/arch/arm64/boot/dts/microchip/sparx5.dtsi +++ b/arch/arm64/boot/dts/microchip/sparx5.dtsi @@ -465,7 +465,7 @@ reg = <0x6 0x10808000 0x5d0000>; }; - switch: switch@0x600000000 { + switch: switch@600000000 { compatible = "microchip,sparx5-switch"; reg = <0x6 0 0x401000>, <0x6 0x10004000 0x7fc000>, diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi index bf12be5e8d84..ed94a80bf05f 100644 --- a/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi +++ b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi @@ -538,7 +538,7 @@ }; &mdio3 { - status = "ok"; + status = "okay"; phy64: ethernet-phy@64 { reg = <28>; }; diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi index ec90bda7ed6a..0760cf2e48bc 100644 --- a/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi +++ b/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi @@ -208,7 +208,7 @@ }; &mdio0 { - status = "ok"; + status = "okay"; phy0: ethernet-phy@0 { reg = <0>; }; @@ -284,7 +284,7 @@ }; &mdio1 { - status = "ok"; + status = "okay"; phy24: ethernet-phy@24 { reg = <0>; }; @@ -360,7 +360,7 @@ }; &mdio3 { - status = "ok"; + status = "okay"; phy64: ethernet-phy@64 { reg = <28>; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts index 3e8dee85d55f..d4c034ac1244 100644 --- a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts +++ b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts @@ -1030,6 +1030,14 @@ gpio-keys { compatible = "gpio-keys"; + key-power { + label = "Power"; + gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + debounce-interval = <10>; + wakeup-source; + }; + switch-lid { label = "Lid"; gpios = <&gpio TEGRA_GPIO(R, 4) GPIO_ACTIVE_LOW>; @@ -1038,14 +1046,6 @@ debounce-interval = <1>; wakeup-source; }; - - key-power { - label = "Power"; - gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>; - linux,code = <KEY_POWER>; - debounce-interval = <10>; - wakeup-source; - }; }; panel: panel { diff --git a/arch/arm64/boot/dts/nvidia/tegra132.dtsi b/arch/arm64/boot/dts/nvidia/tegra132.dtsi index 858fc01cecb6..c017764bc27e 100644 --- a/arch/arm64/boot/dts/nvidia/tegra132.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra132.dtsi @@ -893,122 +893,6 @@ }; }; - thermal-zones { - cpu-thermal { - polling-delay-passive = <1000>; - polling-delay = <0>; - - thermal-sensors = - <&soctherm TEGRA124_SOCTHERM_SENSOR_CPU>; - - trips { - cpu_shutdown_trip { - temperature = <105000>; - hysteresis = <1000>; - type = "critical"; - }; - - cpu_throttle_trip: throttle-trip { - temperature = <102000>; - hysteresis = <1000>; - type = "hot"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu_throttle_trip>; - cooling-device = <&throttle_heavy 1 1>; - }; - }; - }; - - mem-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - - thermal-sensors = - <&soctherm TEGRA124_SOCTHERM_SENSOR_MEM>; - - trips { - mem_shutdown_trip { - temperature = <101000>; - hysteresis = <1000>; - type = "critical"; - }; - mem_throttle_trip { - temperature = <99000>; - hysteresis = <1000>; - type = "hot"; - }; - }; - - cooling-maps { - /* - * There are currently no cooling maps, - * because there are no cooling devices. - */ - }; - }; - - gpu-thermal { - polling-delay-passive = <1000>; - polling-delay = <0>; - - thermal-sensors = - <&soctherm TEGRA124_SOCTHERM_SENSOR_GPU>; - - trips { - gpu_shutdown_trip { - temperature = <101000>; - hysteresis = <1000>; - type = "critical"; - }; - - gpu_throttle_trip: throttle-trip { - temperature = <99000>; - hysteresis = <1000>; - type = "hot"; - }; - }; - - cooling-maps { - map0 { - trip = <&gpu_throttle_trip>; - cooling-device = <&throttle_heavy 1 1>; - }; - }; - }; - - pllx-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - - thermal-sensors = - <&soctherm TEGRA124_SOCTHERM_SENSOR_PLLX>; - - trips { - pllx_shutdown_trip { - temperature = <105000>; - hysteresis = <1000>; - type = "critical"; - }; - pllx_throttle_trip { - temperature = <99000>; - hysteresis = <1000>; - type = "hot"; - }; - }; - - cooling-maps { - /* - * There are currently no cooling maps, - * because there are no cooling devices. - */ - }; - }; - }; - ahub@70300000 { compatible = "nvidia,tegra124-ahub"; reg = <0x0 0x70300000 0x0 0x200>, @@ -1255,6 +1139,122 @@ }; }; + thermal-zones { + cpu-thermal { + polling-delay-passive = <1000>; + polling-delay = <0>; + + thermal-sensors = + <&soctherm TEGRA124_SOCTHERM_SENSOR_CPU>; + + trips { + cpu_shutdown_trip { + temperature = <105000>; + hysteresis = <1000>; + type = "critical"; + }; + + cpu_throttle_trip: throttle-trip { + temperature = <102000>; + hysteresis = <1000>; + type = "hot"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_throttle_trip>; + cooling-device = <&throttle_heavy 1 1>; + }; + }; + }; + + mem-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = + <&soctherm TEGRA124_SOCTHERM_SENSOR_MEM>; + + trips { + mem_shutdown_trip { + temperature = <101000>; + hysteresis = <1000>; + type = "critical"; + }; + mem_throttle_trip { + temperature = <99000>; + hysteresis = <1000>; + type = "hot"; + }; + }; + + cooling-maps { + /* + * There are currently no cooling maps, + * because there are no cooling devices. + */ + }; + }; + + gpu-thermal { + polling-delay-passive = <1000>; + polling-delay = <0>; + + thermal-sensors = + <&soctherm TEGRA124_SOCTHERM_SENSOR_GPU>; + + trips { + gpu_shutdown_trip { + temperature = <101000>; + hysteresis = <1000>; + type = "critical"; + }; + + gpu_throttle_trip: throttle-trip { + temperature = <99000>; + hysteresis = <1000>; + type = "hot"; + }; + }; + + cooling-maps { + map0 { + trip = <&gpu_throttle_trip>; + cooling-device = <&throttle_heavy 1 1>; + }; + }; + }; + + pllx-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = + <&soctherm TEGRA124_SOCTHERM_SENSOR_PLLX>; + + trips { + pllx_shutdown_trip { + temperature = <105000>; + hysteresis = <1000>; + type = "critical"; + }; + pllx_throttle_trip { + temperature = <99000>; + hysteresis = <1000>; + type = "hot"; + }; + }; + + cooling-maps { + /* + * There are currently no cooling maps, + * because there are no cooling devices. + */ + }; + }; + }; + timer { compatible = "arm,armv7-timer"; interrupts = <GIC_PPI 13 diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts index 47cf2013afcc..15aa49fc4503 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts @@ -13,1095 +13,9 @@ aconnect@2900000 { status = "okay"; - dma-controller@2930000 { - status = "okay"; - }; - - interrupt-controller@2a40000 { - status = "okay"; - }; - ahub@2900800 { status = "okay"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0x0>; - - xbar_admaif0_ep: endpoint { - remote-endpoint = <&admaif0_ep>; - }; - }; - - port@1 { - reg = <0x1>; - - xbar_admaif1_ep: endpoint { - remote-endpoint = <&admaif1_ep>; - }; - }; - - port@2 { - reg = <0x2>; - - xbar_admaif2_ep: endpoint { - remote-endpoint = <&admaif2_ep>; - }; - }; - - port@3 { - reg = <0x3>; - - xbar_admaif3_ep: endpoint { - remote-endpoint = <&admaif3_ep>; - }; - }; - - port@4 { - reg = <0x4>; - - xbar_admaif4_ep: endpoint { - remote-endpoint = <&admaif4_ep>; - }; - }; - - port@5 { - reg = <0x5>; - - xbar_admaif5_ep: endpoint { - remote-endpoint = <&admaif5_ep>; - }; - }; - - port@6 { - reg = <0x6>; - - xbar_admaif6_ep: endpoint { - remote-endpoint = <&admaif6_ep>; - }; - }; - - port@7 { - reg = <0x7>; - - xbar_admaif7_ep: endpoint { - remote-endpoint = <&admaif7_ep>; - }; - }; - - port@8 { - reg = <0x8>; - - xbar_admaif8_ep: endpoint { - remote-endpoint = <&admaif8_ep>; - }; - }; - - port@9 { - reg = <0x9>; - - xbar_admaif9_ep: endpoint { - remote-endpoint = <&admaif9_ep>; - }; - }; - - port@a { - reg = <0xa>; - - xbar_admaif10_ep: endpoint { - remote-endpoint = <&admaif10_ep>; - }; - }; - - port@b { - reg = <0xb>; - - xbar_admaif11_ep: endpoint { - remote-endpoint = <&admaif11_ep>; - }; - }; - - port@c { - reg = <0xc>; - - xbar_admaif12_ep: endpoint { - remote-endpoint = <&admaif12_ep>; - }; - }; - - port@d { - reg = <0xd>; - - xbar_admaif13_ep: endpoint { - remote-endpoint = <&admaif13_ep>; - }; - }; - - port@e { - reg = <0xe>; - - xbar_admaif14_ep: endpoint { - remote-endpoint = <&admaif14_ep>; - }; - }; - - port@f { - reg = <0xf>; - - xbar_admaif15_ep: endpoint { - remote-endpoint = <&admaif15_ep>; - }; - }; - - port@10 { - reg = <0x10>; - - xbar_admaif16_ep: endpoint { - remote-endpoint = <&admaif16_ep>; - }; - }; - - port@11 { - reg = <0x11>; - - xbar_admaif17_ep: endpoint { - remote-endpoint = <&admaif17_ep>; - }; - }; - - port@12 { - reg = <0x12>; - - xbar_admaif18_ep: endpoint { - remote-endpoint = <&admaif18_ep>; - }; - }; - - port@13 { - reg = <0x13>; - - xbar_admaif19_ep: endpoint { - remote-endpoint = <&admaif19_ep>; - }; - }; - - xbar_i2s1_port: port@14 { - reg = <0x14>; - - xbar_i2s1_ep: endpoint { - remote-endpoint = <&i2s1_cif_ep>; - }; - }; - - xbar_i2s2_port: port@15 { - reg = <0x15>; - - xbar_i2s2_ep: endpoint { - remote-endpoint = <&i2s2_cif_ep>; - }; - }; - - xbar_i2s3_port: port@16 { - reg = <0x16>; - - xbar_i2s3_ep: endpoint { - remote-endpoint = <&i2s3_cif_ep>; - }; - }; - - xbar_i2s4_port: port@17 { - reg = <0x17>; - - xbar_i2s4_ep: endpoint { - remote-endpoint = <&i2s4_cif_ep>; - }; - }; - - xbar_i2s5_port: port@18 { - reg = <0x18>; - - xbar_i2s5_ep: endpoint { - remote-endpoint = <&i2s5_cif_ep>; - }; - }; - - xbar_i2s6_port: port@19 { - reg = <0x19>; - - xbar_i2s6_ep: endpoint { - remote-endpoint = <&i2s6_cif_ep>; - }; - }; - - xbar_dmic1_port: port@1a { - reg = <0x1a>; - - xbar_dmic1_ep: endpoint { - remote-endpoint = <&dmic1_cif_ep>; - }; - }; - - xbar_dmic2_port: port@1b { - reg = <0x1b>; - - xbar_dmic2_ep: endpoint { - remote-endpoint = <&dmic2_cif_ep>; - }; - }; - - xbar_dmic3_port: port@1c { - reg = <0x1c>; - - xbar_dmic3_ep: endpoint { - remote-endpoint = <&dmic3_cif_ep>; - }; - }; - - xbar_dspk1_port: port@1e { - reg = <0x1e>; - - xbar_dspk1_ep: endpoint { - remote-endpoint = <&dspk1_cif_ep>; - }; - }; - - xbar_dspk2_port: port@1f { - reg = <0x1f>; - - xbar_dspk2_ep: endpoint { - remote-endpoint = <&dspk2_cif_ep>; - }; - }; - - xbar_sfc1_in_port: port@20 { - reg = <0x20>; - - xbar_sfc1_in_ep: endpoint { - remote-endpoint = <&sfc1_cif_in_ep>; - }; - }; - - port@21 { - reg = <0x21>; - - xbar_sfc1_out_ep: endpoint { - remote-endpoint = <&sfc1_cif_out_ep>; - }; - }; - - xbar_sfc2_in_port: port@22 { - reg = <0x22>; - - xbar_sfc2_in_ep: endpoint { - remote-endpoint = <&sfc2_cif_in_ep>; - }; - }; - - port@23 { - reg = <0x23>; - - xbar_sfc2_out_ep: endpoint { - remote-endpoint = <&sfc2_cif_out_ep>; - }; - }; - - xbar_sfc3_in_port: port@24 { - reg = <0x24>; - - xbar_sfc3_in_ep: endpoint { - remote-endpoint = <&sfc3_cif_in_ep>; - }; - }; - - port@25 { - reg = <0x25>; - - xbar_sfc3_out_ep: endpoint { - remote-endpoint = <&sfc3_cif_out_ep>; - }; - }; - - xbar_sfc4_in_port: port@26 { - reg = <0x26>; - - xbar_sfc4_in_ep: endpoint { - remote-endpoint = <&sfc4_cif_in_ep>; - }; - }; - - port@27 { - reg = <0x27>; - - xbar_sfc4_out_ep: endpoint { - remote-endpoint = <&sfc4_cif_out_ep>; - }; - }; - - xbar_mvc1_in_port: port@28 { - reg = <0x28>; - - xbar_mvc1_in_ep: endpoint { - remote-endpoint = <&mvc1_cif_in_ep>; - }; - }; - - port@29 { - reg = <0x29>; - - xbar_mvc1_out_ep: endpoint { - remote-endpoint = <&mvc1_cif_out_ep>; - }; - }; - - xbar_mvc2_in_port: port@2a { - reg = <0x2a>; - - xbar_mvc2_in_ep: endpoint { - remote-endpoint = <&mvc2_cif_in_ep>; - }; - }; - - port@2b { - reg = <0x2b>; - - xbar_mvc2_out_ep: endpoint { - remote-endpoint = <&mvc2_cif_out_ep>; - }; - }; - - xbar_amx1_in1_port: port@2c { - reg = <0x2c>; - - xbar_amx1_in1_ep: endpoint { - remote-endpoint = <&amx1_in1_ep>; - }; - }; - - xbar_amx1_in2_port: port@2d { - reg = <0x2d>; - - xbar_amx1_in2_ep: endpoint { - remote-endpoint = <&amx1_in2_ep>; - }; - }; - - xbar_amx1_in3_port: port@2e { - reg = <0x2e>; - - xbar_amx1_in3_ep: endpoint { - remote-endpoint = <&amx1_in3_ep>; - }; - }; - - xbar_amx1_in4_port: port@2f { - reg = <0x2f>; - - xbar_amx1_in4_ep: endpoint { - remote-endpoint = <&amx1_in4_ep>; - }; - }; - - port@30 { - reg = <0x30>; - - xbar_amx1_out_ep: endpoint { - remote-endpoint = <&amx1_out_ep>; - }; - }; - - xbar_amx2_in1_port: port@31 { - reg = <0x31>; - - xbar_amx2_in1_ep: endpoint { - remote-endpoint = <&amx2_in1_ep>; - }; - }; - - xbar_amx2_in2_port: port@32 { - reg = <0x32>; - - xbar_amx2_in2_ep: endpoint { - remote-endpoint = <&amx2_in2_ep>; - }; - }; - - xbar_amx2_in3_port: port@33 { - reg = <0x33>; - - xbar_amx2_in3_ep: endpoint { - remote-endpoint = <&amx2_in3_ep>; - }; - }; - - xbar_amx2_in4_port: port@34 { - reg = <0x34>; - - xbar_amx2_in4_ep: endpoint { - remote-endpoint = <&amx2_in4_ep>; - }; - }; - - port@35 { - reg = <0x35>; - - xbar_amx2_out_ep: endpoint { - remote-endpoint = <&amx2_out_ep>; - }; - }; - - xbar_amx3_in1_port: port@36 { - reg = <0x36>; - - xbar_amx3_in1_ep: endpoint { - remote-endpoint = <&amx3_in1_ep>; - }; - }; - - xbar_amx3_in2_port: port@37 { - reg = <0x37>; - - xbar_amx3_in2_ep: endpoint { - remote-endpoint = <&amx3_in2_ep>; - }; - }; - - xbar_amx3_in3_port: port@38 { - reg = <0x38>; - - xbar_amx3_in3_ep: endpoint { - remote-endpoint = <&amx3_in3_ep>; - }; - }; - - xbar_amx3_in4_port: port@39 { - reg = <0x39>; - - xbar_amx3_in4_ep: endpoint { - remote-endpoint = <&amx3_in4_ep>; - }; - }; - - port@3a { - reg = <0x3a>; - - xbar_amx3_out_ep: endpoint { - remote-endpoint = <&amx3_out_ep>; - }; - }; - - xbar_amx4_in1_port: port@3b { - reg = <0x3b>; - - xbar_amx4_in1_ep: endpoint { - remote-endpoint = <&amx4_in1_ep>; - }; - }; - - xbar_amx4_in2_port: port@3c { - reg = <0x3c>; - - xbar_amx4_in2_ep: endpoint { - remote-endpoint = <&amx4_in2_ep>; - }; - }; - - xbar_amx4_in3_port: port@3d { - reg = <0x3d>; - - xbar_amx4_in3_ep: endpoint { - remote-endpoint = <&amx4_in3_ep>; - }; - }; - - xbar_amx4_in4_port: port@3e { - reg = <0x3e>; - - xbar_amx4_in4_ep: endpoint { - remote-endpoint = <&amx4_in4_ep>; - }; - }; - - port@3f { - reg = <0x3f>; - - xbar_amx4_out_ep: endpoint { - remote-endpoint = <&amx4_out_ep>; - }; - }; - - xbar_adx1_in_port: port@40 { - reg = <0x40>; - - xbar_adx1_in_ep: endpoint { - remote-endpoint = <&adx1_in_ep>; - }; - }; - - port@41 { - reg = <0x41>; - - xbar_adx1_out1_ep: endpoint { - remote-endpoint = <&adx1_out1_ep>; - }; - }; - - port@42 { - reg = <0x42>; - - xbar_adx1_out2_ep: endpoint { - remote-endpoint = <&adx1_out2_ep>; - }; - }; - - port@43 { - reg = <0x43>; - - xbar_adx1_out3_ep: endpoint { - remote-endpoint = <&adx1_out3_ep>; - }; - }; - - port@44 { - reg = <0x44>; - - xbar_adx1_out4_ep: endpoint { - remote-endpoint = <&adx1_out4_ep>; - }; - }; - - xbar_adx2_in_port: port@45 { - reg = <0x45>; - - xbar_adx2_in_ep: endpoint { - remote-endpoint = <&adx2_in_ep>; - }; - }; - - port@46 { - reg = <0x46>; - - xbar_adx2_out1_ep: endpoint { - remote-endpoint = <&adx2_out1_ep>; - }; - }; - - port@47 { - reg = <0x47>; - - xbar_adx2_out2_ep: endpoint { - remote-endpoint = <&adx2_out2_ep>; - }; - }; - - port@48 { - reg = <0x48>; - - xbar_adx2_out3_ep: endpoint { - remote-endpoint = <&adx2_out3_ep>; - }; - }; - - port@49 { - reg = <0x49>; - - xbar_adx2_out4_ep: endpoint { - remote-endpoint = <&adx2_out4_ep>; - }; - }; - - xbar_adx3_in_port: port@4a { - reg = <0x4a>; - - xbar_adx3_in_ep: endpoint { - remote-endpoint = <&adx3_in_ep>; - }; - }; - - port@4b { - reg = <0x4b>; - - xbar_adx3_out1_ep: endpoint { - remote-endpoint = <&adx3_out1_ep>; - }; - }; - - port@4c { - reg = <0x4c>; - - xbar_adx3_out2_ep: endpoint { - remote-endpoint = <&adx3_out2_ep>; - }; - }; - - port@4d { - reg = <0x4d>; - - xbar_adx3_out3_ep: endpoint { - remote-endpoint = <&adx3_out3_ep>; - }; - }; - - port@4e { - reg = <0x4e>; - - xbar_adx3_out4_ep: endpoint { - remote-endpoint = <&adx3_out4_ep>; - }; - }; - - xbar_adx4_in_port: port@4f { - reg = <0x4f>; - - xbar_adx4_in_ep: endpoint { - remote-endpoint = <&adx4_in_ep>; - }; - }; - - port@50 { - reg = <0x50>; - - xbar_adx4_out1_ep: endpoint { - remote-endpoint = <&adx4_out1_ep>; - }; - }; - - port@51 { - reg = <0x51>; - - xbar_adx4_out2_ep: endpoint { - remote-endpoint = <&adx4_out2_ep>; - }; - }; - - port@52 { - reg = <0x52>; - - xbar_adx4_out3_ep: endpoint { - remote-endpoint = <&adx4_out3_ep>; - }; - }; - - port@53 { - reg = <0x53>; - - xbar_adx4_out4_ep: endpoint { - remote-endpoint = <&adx4_out4_ep>; - }; - }; - - xbar_mixer_in1_port: port@54 { - reg = <0x54>; - - xbar_mixer_in1_ep: endpoint { - remote-endpoint = <&mixer_in1_ep>; - }; - }; - - xbar_mixer_in2_port: port@55 { - reg = <0x55>; - - xbar_mixer_in2_ep: endpoint { - remote-endpoint = <&mixer_in2_ep>; - }; - }; - - xbar_mixer_in3_port: port@56 { - reg = <0x56>; - - xbar_mixer_in3_ep: endpoint { - remote-endpoint = <&mixer_in3_ep>; - }; - }; - - xbar_mixer_in4_port: port@57 { - reg = <0x57>; - - xbar_mixer_in4_ep: endpoint { - remote-endpoint = <&mixer_in4_ep>; - }; - }; - - xbar_mixer_in5_port: port@58 { - reg = <0x58>; - - xbar_mixer_in5_ep: endpoint { - remote-endpoint = <&mixer_in5_ep>; - }; - }; - - xbar_mixer_in6_port: port@59 { - reg = <0x59>; - - xbar_mixer_in6_ep: endpoint { - remote-endpoint = <&mixer_in6_ep>; - }; - }; - - xbar_mixer_in7_port: port@5a { - reg = <0x5a>; - - xbar_mixer_in7_ep: endpoint { - remote-endpoint = <&mixer_in7_ep>; - }; - }; - - xbar_mixer_in8_port: port@5b { - reg = <0x5b>; - - xbar_mixer_in8_ep: endpoint { - remote-endpoint = <&mixer_in8_ep>; - }; - }; - - xbar_mixer_in9_port: port@5c { - reg = <0x5c>; - - xbar_mixer_in9_ep: endpoint { - remote-endpoint = <&mixer_in9_ep>; - }; - }; - - xbar_mixer_in10_port: port@5d { - reg = <0x5d>; - - xbar_mixer_in10_ep: endpoint { - remote-endpoint = <&mixer_in10_ep>; - }; - }; - - port@5e { - reg = <0x5e>; - - xbar_mixer_out1_ep: endpoint { - remote-endpoint = <&mixer_out1_ep>; - }; - }; - - port@5f { - reg = <0x5f>; - - xbar_mixer_out2_ep: endpoint { - remote-endpoint = <&mixer_out2_ep>; - }; - }; - - port@60 { - reg = <0x60>; - - xbar_mixer_out3_ep: endpoint { - remote-endpoint = <&mixer_out3_ep>; - }; - }; - - port@61 { - reg = <0x61>; - - xbar_mixer_out4_ep: endpoint { - remote-endpoint = <&mixer_out4_ep>; - }; - }; - - port@62 { - reg = <0x62>; - - xbar_mixer_out5_ep: endpoint { - remote-endpoint = <&mixer_out5_ep>; - }; - }; - - xbar_asrc_in1_port: port@63 { - reg = <0x63>; - - xbar_asrc_in1_ep: endpoint { - remote-endpoint = <&asrc_in1_ep>; - }; - }; - - port@64 { - reg = <0x64>; - - xbar_asrc_out1_ep: endpoint { - remote-endpoint = <&asrc_out1_ep>; - }; - }; - - xbar_asrc_in2_port: port@65 { - reg = <0x65>; - - xbar_asrc_in2_ep: endpoint { - remote-endpoint = <&asrc_in2_ep>; - }; - }; - - port@66 { - reg = <0x66>; - - xbar_asrc_out2_ep: endpoint { - remote-endpoint = <&asrc_out2_ep>; - }; - }; - - xbar_asrc_in3_port: port@67 { - reg = <0x67>; - - xbar_asrc_in3_ep: endpoint { - remote-endpoint = <&asrc_in3_ep>; - }; - }; - - port@68 { - reg = <0x68>; - - xbar_asrc_out3_ep: endpoint { - remote-endpoint = <&asrc_out3_ep>; - }; - }; - - xbar_asrc_in4_port: port@69 { - reg = <0x69>; - - xbar_asrc_in4_ep: endpoint { - remote-endpoint = <&asrc_in4_ep>; - }; - }; - - port@6a { - reg = <0x6a>; - - xbar_asrc_out4_ep: endpoint { - remote-endpoint = <&asrc_out4_ep>; - }; - }; - - xbar_asrc_in5_port: port@6b { - reg = <0x6b>; - - xbar_asrc_in5_ep: endpoint { - remote-endpoint = <&asrc_in5_ep>; - }; - }; - - port@6c { - reg = <0x6c>; - - xbar_asrc_out5_ep: endpoint { - remote-endpoint = <&asrc_out5_ep>; - }; - }; - - xbar_asrc_in6_port: port@6d { - reg = <0x6d>; - - xbar_asrc_in6_ep: endpoint { - remote-endpoint = <&asrc_in6_ep>; - }; - }; - - port@6e { - reg = <0x6e>; - - xbar_asrc_out6_ep: endpoint { - remote-endpoint = <&asrc_out6_ep>; - }; - }; - - xbar_asrc_in7_port: port@6f { - reg = <0x6f>; - - xbar_asrc_in7_ep: endpoint { - remote-endpoint = <&asrc_in7_ep>; - }; - }; - - xbar_ope1_in_port: port@70 { - reg = <0x70>; - - xbar_ope1_in_ep: endpoint { - remote-endpoint = <&ope1_cif_in_ep>; - }; - }; - - port@71 { - reg = <0x71>; - - xbar_ope1_out_ep: endpoint { - remote-endpoint = <&ope1_cif_out_ep>; - }; - }; - }; - - admaif@290f000 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - admaif0_port: port@0 { - reg = <0x0>; - - admaif0_ep: endpoint { - remote-endpoint = <&xbar_admaif0_ep>; - }; - }; - - admaif1_port: port@1 { - reg = <0x1>; - - admaif1_ep: endpoint { - remote-endpoint = <&xbar_admaif1_ep>; - }; - }; - - admaif2_port: port@2 { - reg = <0x2>; - - admaif2_ep: endpoint { - remote-endpoint = <&xbar_admaif2_ep>; - }; - }; - - admaif3_port: port@3 { - reg = <0x3>; - - admaif3_ep: endpoint { - remote-endpoint = <&xbar_admaif3_ep>; - }; - }; - - admaif4_port: port@4 { - reg = <0x4>; - - admaif4_ep: endpoint { - remote-endpoint = <&xbar_admaif4_ep>; - }; - }; - - admaif5_port: port@5 { - reg = <0x5>; - - admaif5_ep: endpoint { - remote-endpoint = <&xbar_admaif5_ep>; - }; - }; - - admaif6_port: port@6 { - reg = <0x6>; - - admaif6_ep: endpoint { - remote-endpoint = <&xbar_admaif6_ep>; - }; - }; - - admaif7_port: port@7 { - reg = <0x7>; - - admaif7_ep: endpoint { - remote-endpoint = <&xbar_admaif7_ep>; - }; - }; - - admaif8_port: port@8 { - reg = <0x8>; - - admaif8_ep: endpoint { - remote-endpoint = <&xbar_admaif8_ep>; - }; - }; - - admaif9_port: port@9 { - reg = <0x9>; - - admaif9_ep: endpoint { - remote-endpoint = <&xbar_admaif9_ep>; - }; - }; - - admaif10_port: port@a { - reg = <0xa>; - - admaif10_ep: endpoint { - remote-endpoint = <&xbar_admaif10_ep>; - }; - }; - - admaif11_port: port@b { - reg = <0xb>; - - admaif11_ep: endpoint { - remote-endpoint = <&xbar_admaif11_ep>; - }; - }; - - admaif12_port: port@c { - reg = <0xc>; - - admaif12_ep: endpoint { - remote-endpoint = <&xbar_admaif12_ep>; - }; - }; - - admaif13_port: port@d { - reg = <0xd>; - - admaif13_ep: endpoint { - remote-endpoint = <&xbar_admaif13_ep>; - }; - }; - - admaif14_port: port@e { - reg = <0xe>; - - admaif14_ep: endpoint { - remote-endpoint = <&xbar_admaif14_ep>; - }; - }; - - admaif15_port: port@f { - reg = <0xf>; - - admaif15_ep: endpoint { - remote-endpoint = <&xbar_admaif15_ep>; - }; - }; - - admaif16_port: port@10 { - reg = <0x10>; - - admaif16_ep: endpoint { - remote-endpoint = <&xbar_admaif16_ep>; - }; - }; - - admaif17_port: port@11 { - reg = <0x11>; - - admaif17_ep: endpoint { - remote-endpoint = <&xbar_admaif17_ep>; - }; - }; - - admaif18_port: port@12 { - reg = <0x12>; - - admaif18_ep: endpoint { - remote-endpoint = <&xbar_admaif18_ep>; - }; - }; - - admaif19_port: port@13 { - reg = <0x13>; - - admaif19_ep: endpoint { - remote-endpoint = <&xbar_admaif19_ep>; - }; - }; - }; - }; - i2s@2901000 { status = "okay"; @@ -1258,131 +172,6 @@ }; }; - dmic@2904000 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - dmic1_cif_ep: endpoint { - remote-endpoint = <&xbar_dmic1_ep>; - }; - }; - - dmic1_port: port@1 { - reg = <1>; - - dmic1_dap_ep: endpoint { - /* Place holder for external Codec */ - }; - }; - }; - }; - - dmic@2904100 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - dmic2_cif_ep: endpoint { - remote-endpoint = <&xbar_dmic2_ep>; - }; - }; - - dmic2_port: port@1 { - reg = <1>; - - dmic2_dap_ep: endpoint { - /* Place holder for external Codec */ - }; - }; - }; - }; - - dmic@2904200 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - dmic3_cif_ep: endpoint { - remote-endpoint = <&xbar_dmic3_ep>; - }; - }; - - dmic3_port: port@1 { - reg = <1>; - - dmic3_dap_ep: endpoint { - /* Place holder for external Codec */ - }; - }; - }; - }; - - dspk@2905000 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - dspk1_cif_ep: endpoint { - remote-endpoint = <&xbar_dspk1_ep>; - }; - }; - - dspk1_port: port@1 { - reg = <1>; - - dspk1_dap_ep: endpoint { - /* Place holder for external Codec */ - }; - }; - }; - }; - - dspk@2905100 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - dspk2_cif_ep: endpoint { - remote-endpoint = <&xbar_dspk2_ep>; - }; - }; - - dspk2_port: port@1 { - reg = <1>; - - dspk2_dap_ep: endpoint { - /* Place holder for external Codec */ - }; - }; - }; - }; - sfc@2902000 { status = "okay"; @@ -1485,56 +274,6 @@ }; }; - mvc@290a000 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - mvc1_cif_in_ep: endpoint { - remote-endpoint = <&xbar_mvc1_in_ep>; - }; - }; - - mvc1_out_port: port@1 { - reg = <1>; - - mvc1_cif_out_ep: endpoint { - remote-endpoint = <&xbar_mvc1_out_ep>; - }; - }; - }; - }; - - mvc@290a200 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - mvc2_cif_in_ep: endpoint { - remote-endpoint = <&xbar_mvc2_in_ep>; - }; - }; - - mvc2_out_port: port@1 { - reg = <1>; - - mvc2_cif_out_ep: endpoint { - remote-endpoint = <&xbar_mvc2_out_ep>; - }; - }; - }; - }; - amx@2903000 { status = "okay"; @@ -1927,6 +666,131 @@ }; }; + dmic@2904000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dmic1_cif_ep: endpoint { + remote-endpoint = <&xbar_dmic1_ep>; + }; + }; + + dmic1_port: port@1 { + reg = <1>; + + dmic1_dap_ep: endpoint { + /* Place holder for external Codec */ + }; + }; + }; + }; + + dmic@2904100 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dmic2_cif_ep: endpoint { + remote-endpoint = <&xbar_dmic2_ep>; + }; + }; + + dmic2_port: port@1 { + reg = <1>; + + dmic2_dap_ep: endpoint { + /* Place holder for external Codec */ + }; + }; + }; + }; + + dmic@2904200 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dmic3_cif_ep: endpoint { + remote-endpoint = <&xbar_dmic3_ep>; + }; + }; + + dmic3_port: port@1 { + reg = <1>; + + dmic3_dap_ep: endpoint { + /* Place holder for external Codec */ + }; + }; + }; + }; + + dspk@2905000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dspk1_cif_ep: endpoint { + remote-endpoint = <&xbar_dspk1_ep>; + }; + }; + + dspk1_port: port@1 { + reg = <1>; + + dspk1_dap_ep: endpoint { + /* Place holder for external Codec */ + }; + }; + }; + }; + + dspk@2905100 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dspk2_cif_ep: endpoint { + remote-endpoint = <&xbar_dspk2_ep>; + }; + }; + + dspk2_port: port@1 { + reg = <1>; + + dspk2_dap_ep: endpoint { + /* Place holder for external Codec */ + }; + }; + }; + }; + processing-engine@2908000 { status = "okay"; @@ -1952,6 +816,56 @@ }; }; + mvc@290a000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mvc1_cif_in_ep: endpoint { + remote-endpoint = <&xbar_mvc1_in_ep>; + }; + }; + + mvc1_out_port: port@1 { + reg = <1>; + + mvc1_cif_out_ep: endpoint { + remote-endpoint = <&xbar_mvc1_out_ep>; + }; + }; + }; + }; + + mvc@290a200 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mvc2_cif_in_ep: endpoint { + remote-endpoint = <&xbar_mvc2_in_ep>; + }; + }; + + mvc2_out_port: port@1 { + reg = <1>; + + mvc2_cif_out_ep: endpoint { + remote-endpoint = <&xbar_mvc2_out_ep>; + }; + }; + }; + }; + amixer@290bb00 { status = "okay"; @@ -2081,6 +995,175 @@ }; }; + admaif@290f000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + admaif0_port: port@0 { + reg = <0x0>; + + admaif0_ep: endpoint { + remote-endpoint = <&xbar_admaif0_ep>; + }; + }; + + admaif1_port: port@1 { + reg = <0x1>; + + admaif1_ep: endpoint { + remote-endpoint = <&xbar_admaif1_ep>; + }; + }; + + admaif2_port: port@2 { + reg = <0x2>; + + admaif2_ep: endpoint { + remote-endpoint = <&xbar_admaif2_ep>; + }; + }; + + admaif3_port: port@3 { + reg = <0x3>; + + admaif3_ep: endpoint { + remote-endpoint = <&xbar_admaif3_ep>; + }; + }; + + admaif4_port: port@4 { + reg = <0x4>; + + admaif4_ep: endpoint { + remote-endpoint = <&xbar_admaif4_ep>; + }; + }; + + admaif5_port: port@5 { + reg = <0x5>; + + admaif5_ep: endpoint { + remote-endpoint = <&xbar_admaif5_ep>; + }; + }; + + admaif6_port: port@6 { + reg = <0x6>; + + admaif6_ep: endpoint { + remote-endpoint = <&xbar_admaif6_ep>; + }; + }; + + admaif7_port: port@7 { + reg = <0x7>; + + admaif7_ep: endpoint { + remote-endpoint = <&xbar_admaif7_ep>; + }; + }; + + admaif8_port: port@8 { + reg = <0x8>; + + admaif8_ep: endpoint { + remote-endpoint = <&xbar_admaif8_ep>; + }; + }; + + admaif9_port: port@9 { + reg = <0x9>; + + admaif9_ep: endpoint { + remote-endpoint = <&xbar_admaif9_ep>; + }; + }; + + admaif10_port: port@a { + reg = <0xa>; + + admaif10_ep: endpoint { + remote-endpoint = <&xbar_admaif10_ep>; + }; + }; + + admaif11_port: port@b { + reg = <0xb>; + + admaif11_ep: endpoint { + remote-endpoint = <&xbar_admaif11_ep>; + }; + }; + + admaif12_port: port@c { + reg = <0xc>; + + admaif12_ep: endpoint { + remote-endpoint = <&xbar_admaif12_ep>; + }; + }; + + admaif13_port: port@d { + reg = <0xd>; + + admaif13_ep: endpoint { + remote-endpoint = <&xbar_admaif13_ep>; + }; + }; + + admaif14_port: port@e { + reg = <0xe>; + + admaif14_ep: endpoint { + remote-endpoint = <&xbar_admaif14_ep>; + }; + }; + + admaif15_port: port@f { + reg = <0xf>; + + admaif15_ep: endpoint { + remote-endpoint = <&xbar_admaif15_ep>; + }; + }; + + admaif16_port: port@10 { + reg = <0x10>; + + admaif16_ep: endpoint { + remote-endpoint = <&xbar_admaif16_ep>; + }; + }; + + admaif17_port: port@11 { + reg = <0x11>; + + admaif17_ep: endpoint { + remote-endpoint = <&xbar_admaif17_ep>; + }; + }; + + admaif18_port: port@12 { + reg = <0x12>; + + admaif18_ep: endpoint { + remote-endpoint = <&xbar_admaif18_ep>; + }; + }; + + admaif19_port: port@13 { + reg = <0x13>; + + admaif19_ep: endpoint { + remote-endpoint = <&xbar_admaif19_ep>; + }; + }; + }; + }; + asrc@2910000 { status = "okay"; @@ -2184,7 +1267,7 @@ }; }; - asrc_out6_port: port@c { + asrc_out6_port: port@c { reg = <0xc>; asrc_out6_ep: endpoint { @@ -2193,6 +1276,923 @@ }; }; }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + + xbar_admaif0_ep: endpoint { + remote-endpoint = <&admaif0_ep>; + }; + }; + + port@1 { + reg = <0x1>; + + xbar_admaif1_ep: endpoint { + remote-endpoint = <&admaif1_ep>; + }; + }; + + port@2 { + reg = <0x2>; + + xbar_admaif2_ep: endpoint { + remote-endpoint = <&admaif2_ep>; + }; + }; + + port@3 { + reg = <0x3>; + + xbar_admaif3_ep: endpoint { + remote-endpoint = <&admaif3_ep>; + }; + }; + + port@4 { + reg = <0x4>; + + xbar_admaif4_ep: endpoint { + remote-endpoint = <&admaif4_ep>; + }; + }; + + port@5 { + reg = <0x5>; + + xbar_admaif5_ep: endpoint { + remote-endpoint = <&admaif5_ep>; + }; + }; + + port@6 { + reg = <0x6>; + + xbar_admaif6_ep: endpoint { + remote-endpoint = <&admaif6_ep>; + }; + }; + + port@7 { + reg = <0x7>; + + xbar_admaif7_ep: endpoint { + remote-endpoint = <&admaif7_ep>; + }; + }; + + port@8 { + reg = <0x8>; + + xbar_admaif8_ep: endpoint { + remote-endpoint = <&admaif8_ep>; + }; + }; + + port@9 { + reg = <0x9>; + + xbar_admaif9_ep: endpoint { + remote-endpoint = <&admaif9_ep>; + }; + }; + + port@a { + reg = <0xa>; + + xbar_admaif10_ep: endpoint { + remote-endpoint = <&admaif10_ep>; + }; + }; + + port@b { + reg = <0xb>; + + xbar_admaif11_ep: endpoint { + remote-endpoint = <&admaif11_ep>; + }; + }; + + port@c { + reg = <0xc>; + + xbar_admaif12_ep: endpoint { + remote-endpoint = <&admaif12_ep>; + }; + }; + + port@d { + reg = <0xd>; + + xbar_admaif13_ep: endpoint { + remote-endpoint = <&admaif13_ep>; + }; + }; + + port@e { + reg = <0xe>; + + xbar_admaif14_ep: endpoint { + remote-endpoint = <&admaif14_ep>; + }; + }; + + port@f { + reg = <0xf>; + + xbar_admaif15_ep: endpoint { + remote-endpoint = <&admaif15_ep>; + }; + }; + + port@10 { + reg = <0x10>; + + xbar_admaif16_ep: endpoint { + remote-endpoint = <&admaif16_ep>; + }; + }; + + port@11 { + reg = <0x11>; + + xbar_admaif17_ep: endpoint { + remote-endpoint = <&admaif17_ep>; + }; + }; + + port@12 { + reg = <0x12>; + + xbar_admaif18_ep: endpoint { + remote-endpoint = <&admaif18_ep>; + }; + }; + + port@13 { + reg = <0x13>; + + xbar_admaif19_ep: endpoint { + remote-endpoint = <&admaif19_ep>; + }; + }; + + xbar_i2s1_port: port@14 { + reg = <0x14>; + + xbar_i2s1_ep: endpoint { + remote-endpoint = <&i2s1_cif_ep>; + }; + }; + + xbar_i2s2_port: port@15 { + reg = <0x15>; + + xbar_i2s2_ep: endpoint { + remote-endpoint = <&i2s2_cif_ep>; + }; + }; + + xbar_i2s3_port: port@16 { + reg = <0x16>; + + xbar_i2s3_ep: endpoint { + remote-endpoint = <&i2s3_cif_ep>; + }; + }; + + xbar_i2s4_port: port@17 { + reg = <0x17>; + + xbar_i2s4_ep: endpoint { + remote-endpoint = <&i2s4_cif_ep>; + }; + }; + + xbar_i2s5_port: port@18 { + reg = <0x18>; + + xbar_i2s5_ep: endpoint { + remote-endpoint = <&i2s5_cif_ep>; + }; + }; + + xbar_i2s6_port: port@19 { + reg = <0x19>; + + xbar_i2s6_ep: endpoint { + remote-endpoint = <&i2s6_cif_ep>; + }; + }; + + xbar_dmic1_port: port@1a { + reg = <0x1a>; + + xbar_dmic1_ep: endpoint { + remote-endpoint = <&dmic1_cif_ep>; + }; + }; + + xbar_dmic2_port: port@1b { + reg = <0x1b>; + + xbar_dmic2_ep: endpoint { + remote-endpoint = <&dmic2_cif_ep>; + }; + }; + + xbar_dmic3_port: port@1c { + reg = <0x1c>; + + xbar_dmic3_ep: endpoint { + remote-endpoint = <&dmic3_cif_ep>; + }; + }; + + xbar_dspk1_port: port@1e { + reg = <0x1e>; + + xbar_dspk1_ep: endpoint { + remote-endpoint = <&dspk1_cif_ep>; + }; + }; + + xbar_dspk2_port: port@1f { + reg = <0x1f>; + + xbar_dspk2_ep: endpoint { + remote-endpoint = <&dspk2_cif_ep>; + }; + }; + + xbar_sfc1_in_port: port@20 { + reg = <0x20>; + + xbar_sfc1_in_ep: endpoint { + remote-endpoint = <&sfc1_cif_in_ep>; + }; + }; + + port@21 { + reg = <0x21>; + + xbar_sfc1_out_ep: endpoint { + remote-endpoint = <&sfc1_cif_out_ep>; + }; + }; + + xbar_sfc2_in_port: port@22 { + reg = <0x22>; + + xbar_sfc2_in_ep: endpoint { + remote-endpoint = <&sfc2_cif_in_ep>; + }; + }; + + port@23 { + reg = <0x23>; + + xbar_sfc2_out_ep: endpoint { + remote-endpoint = <&sfc2_cif_out_ep>; + }; + }; + + xbar_sfc3_in_port: port@24 { + reg = <0x24>; + + xbar_sfc3_in_ep: endpoint { + remote-endpoint = <&sfc3_cif_in_ep>; + }; + }; + + port@25 { + reg = <0x25>; + + xbar_sfc3_out_ep: endpoint { + remote-endpoint = <&sfc3_cif_out_ep>; + }; + }; + + xbar_sfc4_in_port: port@26 { + reg = <0x26>; + + xbar_sfc4_in_ep: endpoint { + remote-endpoint = <&sfc4_cif_in_ep>; + }; + }; + + port@27 { + reg = <0x27>; + + xbar_sfc4_out_ep: endpoint { + remote-endpoint = <&sfc4_cif_out_ep>; + }; + }; + + xbar_mvc1_in_port: port@28 { + reg = <0x28>; + + xbar_mvc1_in_ep: endpoint { + remote-endpoint = <&mvc1_cif_in_ep>; + }; + }; + + port@29 { + reg = <0x29>; + + xbar_mvc1_out_ep: endpoint { + remote-endpoint = <&mvc1_cif_out_ep>; + }; + }; + + xbar_mvc2_in_port: port@2a { + reg = <0x2a>; + + xbar_mvc2_in_ep: endpoint { + remote-endpoint = <&mvc2_cif_in_ep>; + }; + }; + + port@2b { + reg = <0x2b>; + + xbar_mvc2_out_ep: endpoint { + remote-endpoint = <&mvc2_cif_out_ep>; + }; + }; + + xbar_amx1_in1_port: port@2c { + reg = <0x2c>; + + xbar_amx1_in1_ep: endpoint { + remote-endpoint = <&amx1_in1_ep>; + }; + }; + + xbar_amx1_in2_port: port@2d { + reg = <0x2d>; + + xbar_amx1_in2_ep: endpoint { + remote-endpoint = <&amx1_in2_ep>; + }; + }; + + xbar_amx1_in3_port: port@2e { + reg = <0x2e>; + + xbar_amx1_in3_ep: endpoint { + remote-endpoint = <&amx1_in3_ep>; + }; + }; + + xbar_amx1_in4_port: port@2f { + reg = <0x2f>; + + xbar_amx1_in4_ep: endpoint { + remote-endpoint = <&amx1_in4_ep>; + }; + }; + + port@30 { + reg = <0x30>; + + xbar_amx1_out_ep: endpoint { + remote-endpoint = <&amx1_out_ep>; + }; + }; + + xbar_amx2_in1_port: port@31 { + reg = <0x31>; + + xbar_amx2_in1_ep: endpoint { + remote-endpoint = <&amx2_in1_ep>; + }; + }; + + xbar_amx2_in2_port: port@32 { + reg = <0x32>; + + xbar_amx2_in2_ep: endpoint { + remote-endpoint = <&amx2_in2_ep>; + }; + }; + + xbar_amx2_in3_port: port@33 { + reg = <0x33>; + + xbar_amx2_in3_ep: endpoint { + remote-endpoint = <&amx2_in3_ep>; + }; + }; + + xbar_amx2_in4_port: port@34 { + reg = <0x34>; + + xbar_amx2_in4_ep: endpoint { + remote-endpoint = <&amx2_in4_ep>; + }; + }; + + port@35 { + reg = <0x35>; + + xbar_amx2_out_ep: endpoint { + remote-endpoint = <&amx2_out_ep>; + }; + }; + + xbar_amx3_in1_port: port@36 { + reg = <0x36>; + + xbar_amx3_in1_ep: endpoint { + remote-endpoint = <&amx3_in1_ep>; + }; + }; + + xbar_amx3_in2_port: port@37 { + reg = <0x37>; + + xbar_amx3_in2_ep: endpoint { + remote-endpoint = <&amx3_in2_ep>; + }; + }; + + xbar_amx3_in3_port: port@38 { + reg = <0x38>; + + xbar_amx3_in3_ep: endpoint { + remote-endpoint = <&amx3_in3_ep>; + }; + }; + + xbar_amx3_in4_port: port@39 { + reg = <0x39>; + + xbar_amx3_in4_ep: endpoint { + remote-endpoint = <&amx3_in4_ep>; + }; + }; + + port@3a { + reg = <0x3a>; + + xbar_amx3_out_ep: endpoint { + remote-endpoint = <&amx3_out_ep>; + }; + }; + + xbar_amx4_in1_port: port@3b { + reg = <0x3b>; + + xbar_amx4_in1_ep: endpoint { + remote-endpoint = <&amx4_in1_ep>; + }; + }; + + xbar_amx4_in2_port: port@3c { + reg = <0x3c>; + + xbar_amx4_in2_ep: endpoint { + remote-endpoint = <&amx4_in2_ep>; + }; + }; + + xbar_amx4_in3_port: port@3d { + reg = <0x3d>; + + xbar_amx4_in3_ep: endpoint { + remote-endpoint = <&amx4_in3_ep>; + }; + }; + + xbar_amx4_in4_port: port@3e { + reg = <0x3e>; + + xbar_amx4_in4_ep: endpoint { + remote-endpoint = <&amx4_in4_ep>; + }; + }; + + port@3f { + reg = <0x3f>; + + xbar_amx4_out_ep: endpoint { + remote-endpoint = <&amx4_out_ep>; + }; + }; + + xbar_adx1_in_port: port@40 { + reg = <0x40>; + + xbar_adx1_in_ep: endpoint { + remote-endpoint = <&adx1_in_ep>; + }; + }; + + port@41 { + reg = <0x41>; + + xbar_adx1_out1_ep: endpoint { + remote-endpoint = <&adx1_out1_ep>; + }; + }; + + port@42 { + reg = <0x42>; + + xbar_adx1_out2_ep: endpoint { + remote-endpoint = <&adx1_out2_ep>; + }; + }; + + port@43 { + reg = <0x43>; + + xbar_adx1_out3_ep: endpoint { + remote-endpoint = <&adx1_out3_ep>; + }; + }; + + port@44 { + reg = <0x44>; + + xbar_adx1_out4_ep: endpoint { + remote-endpoint = <&adx1_out4_ep>; + }; + }; + + xbar_adx2_in_port: port@45 { + reg = <0x45>; + + xbar_adx2_in_ep: endpoint { + remote-endpoint = <&adx2_in_ep>; + }; + }; + + port@46 { + reg = <0x46>; + + xbar_adx2_out1_ep: endpoint { + remote-endpoint = <&adx2_out1_ep>; + }; + }; + + port@47 { + reg = <0x47>; + + xbar_adx2_out2_ep: endpoint { + remote-endpoint = <&adx2_out2_ep>; + }; + }; + + port@48 { + reg = <0x48>; + + xbar_adx2_out3_ep: endpoint { + remote-endpoint = <&adx2_out3_ep>; + }; + }; + + port@49 { + reg = <0x49>; + + xbar_adx2_out4_ep: endpoint { + remote-endpoint = <&adx2_out4_ep>; + }; + }; + + xbar_adx3_in_port: port@4a { + reg = <0x4a>; + + xbar_adx3_in_ep: endpoint { + remote-endpoint = <&adx3_in_ep>; + }; + }; + + port@4b { + reg = <0x4b>; + + xbar_adx3_out1_ep: endpoint { + remote-endpoint = <&adx3_out1_ep>; + }; + }; + + port@4c { + reg = <0x4c>; + + xbar_adx3_out2_ep: endpoint { + remote-endpoint = <&adx3_out2_ep>; + }; + }; + + port@4d { + reg = <0x4d>; + + xbar_adx3_out3_ep: endpoint { + remote-endpoint = <&adx3_out3_ep>; + }; + }; + + port@4e { + reg = <0x4e>; + + xbar_adx3_out4_ep: endpoint { + remote-endpoint = <&adx3_out4_ep>; + }; + }; + + xbar_adx4_in_port: port@4f { + reg = <0x4f>; + + xbar_adx4_in_ep: endpoint { + remote-endpoint = <&adx4_in_ep>; + }; + }; + + port@50 { + reg = <0x50>; + + xbar_adx4_out1_ep: endpoint { + remote-endpoint = <&adx4_out1_ep>; + }; + }; + + port@51 { + reg = <0x51>; + + xbar_adx4_out2_ep: endpoint { + remote-endpoint = <&adx4_out2_ep>; + }; + }; + + port@52 { + reg = <0x52>; + + xbar_adx4_out3_ep: endpoint { + remote-endpoint = <&adx4_out3_ep>; + }; + }; + + port@53 { + reg = <0x53>; + + xbar_adx4_out4_ep: endpoint { + remote-endpoint = <&adx4_out4_ep>; + }; + }; + + xbar_mixer_in1_port: port@54 { + reg = <0x54>; + + xbar_mixer_in1_ep: endpoint { + remote-endpoint = <&mixer_in1_ep>; + }; + }; + + xbar_mixer_in2_port: port@55 { + reg = <0x55>; + + xbar_mixer_in2_ep: endpoint { + remote-endpoint = <&mixer_in2_ep>; + }; + }; + + xbar_mixer_in3_port: port@56 { + reg = <0x56>; + + xbar_mixer_in3_ep: endpoint { + remote-endpoint = <&mixer_in3_ep>; + }; + }; + + xbar_mixer_in4_port: port@57 { + reg = <0x57>; + + xbar_mixer_in4_ep: endpoint { + remote-endpoint = <&mixer_in4_ep>; + }; + }; + + xbar_mixer_in5_port: port@58 { + reg = <0x58>; + + xbar_mixer_in5_ep: endpoint { + remote-endpoint = <&mixer_in5_ep>; + }; + }; + + xbar_mixer_in6_port: port@59 { + reg = <0x59>; + + xbar_mixer_in6_ep: endpoint { + remote-endpoint = <&mixer_in6_ep>; + }; + }; + + xbar_mixer_in7_port: port@5a { + reg = <0x5a>; + + xbar_mixer_in7_ep: endpoint { + remote-endpoint = <&mixer_in7_ep>; + }; + }; + + xbar_mixer_in8_port: port@5b { + reg = <0x5b>; + + xbar_mixer_in8_ep: endpoint { + remote-endpoint = <&mixer_in8_ep>; + }; + }; + + xbar_mixer_in9_port: port@5c { + reg = <0x5c>; + + xbar_mixer_in9_ep: endpoint { + remote-endpoint = <&mixer_in9_ep>; + }; + }; + + xbar_mixer_in10_port: port@5d { + reg = <0x5d>; + + xbar_mixer_in10_ep: endpoint { + remote-endpoint = <&mixer_in10_ep>; + }; + }; + + port@5e { + reg = <0x5e>; + + xbar_mixer_out1_ep: endpoint { + remote-endpoint = <&mixer_out1_ep>; + }; + }; + + port@5f { + reg = <0x5f>; + + xbar_mixer_out2_ep: endpoint { + remote-endpoint = <&mixer_out2_ep>; + }; + }; + + port@60 { + reg = <0x60>; + + xbar_mixer_out3_ep: endpoint { + remote-endpoint = <&mixer_out3_ep>; + }; + }; + + port@61 { + reg = <0x61>; + + xbar_mixer_out4_ep: endpoint { + remote-endpoint = <&mixer_out4_ep>; + }; + }; + + port@62 { + reg = <0x62>; + + xbar_mixer_out5_ep: endpoint { + remote-endpoint = <&mixer_out5_ep>; + }; + }; + + xbar_asrc_in1_port: port@63 { + reg = <0x63>; + + xbar_asrc_in1_ep: endpoint { + remote-endpoint = <&asrc_in1_ep>; + }; + }; + + port@64 { + reg = <0x64>; + + xbar_asrc_out1_ep: endpoint { + remote-endpoint = <&asrc_out1_ep>; + }; + }; + + xbar_asrc_in2_port: port@65 { + reg = <0x65>; + + xbar_asrc_in2_ep: endpoint { + remote-endpoint = <&asrc_in2_ep>; + }; + }; + + port@66 { + reg = <0x66>; + + xbar_asrc_out2_ep: endpoint { + remote-endpoint = <&asrc_out2_ep>; + }; + }; + + xbar_asrc_in3_port: port@67 { + reg = <0x67>; + + xbar_asrc_in3_ep: endpoint { + remote-endpoint = <&asrc_in3_ep>; + }; + }; + + port@68 { + reg = <0x68>; + + xbar_asrc_out3_ep: endpoint { + remote-endpoint = <&asrc_out3_ep>; + }; + }; + + xbar_asrc_in4_port: port@69 { + reg = <0x69>; + + xbar_asrc_in4_ep: endpoint { + remote-endpoint = <&asrc_in4_ep>; + }; + }; + + port@6a { + reg = <0x6a>; + + xbar_asrc_out4_ep: endpoint { + remote-endpoint = <&asrc_out4_ep>; + }; + }; + + xbar_asrc_in5_port: port@6b { + reg = <0x6b>; + + xbar_asrc_in5_ep: endpoint { + remote-endpoint = <&asrc_in5_ep>; + }; + }; + + port@6c { + reg = <0x6c>; + + xbar_asrc_out5_ep: endpoint { + remote-endpoint = <&asrc_out5_ep>; + }; + }; + + xbar_asrc_in6_port: port@6d { + reg = <0x6d>; + + xbar_asrc_in6_ep: endpoint { + remote-endpoint = <&asrc_in6_ep>; + }; + }; + + port@6e { + reg = <0x6e>; + + xbar_asrc_out6_ep: endpoint { + remote-endpoint = <&asrc_out6_ep>; + }; + }; + + xbar_asrc_in7_port: port@6f { + reg = <0x6f>; + + xbar_asrc_in7_ep: endpoint { + remote-endpoint = <&asrc_in7_ep>; + }; + }; + + xbar_ope1_in_port: port@70 { + reg = <0x70>; + + xbar_ope1_in_ep: endpoint { + remote-endpoint = <&ope1_cif_in_ep>; + }; + }; + + port@71 { + reg = <0x71>; + + xbar_ope1_out_ep: endpoint { + remote-endpoint = <&ope1_cif_out_ep>; + }; + }; + }; + }; + + dma-controller@2930000 { + status = "okay"; + }; + + interrupt-controller@2a40000 { + status = "okay"; }; }; @@ -2283,6 +2283,10 @@ vmmc-supply = <&vdd_sd>; }; + sata@3507000 { + status = "okay"; + }; + hda@3510000 { nvidia,model = "NVIDIA Jetson TX2 HDA"; status = "okay"; @@ -2471,10 +2475,6 @@ }; }; - sata@3507000 { - status = "okay"; - }; - gpio-keys { compatible = "gpio-keys"; @@ -2489,21 +2489,21 @@ wakeup-source; }; - key-volume-up { - label = "Volume Up"; - gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 1) + key-volume-down { + label = "Volume Down"; + gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 2) GPIO_ACTIVE_LOW>; linux,input-type = <EV_KEY>; - linux,code = <KEY_VOLUMEUP>; + linux,code = <KEY_VOLUMEDOWN>; debounce-interval = <10>; }; - key-volume-down { - label = "Volume Down"; - gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 2) + key-volume-up { + label = "Volume Up"; + gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 1) GPIO_ACTIVE_LOW>; linux,input-type = <EV_KEY>; - linux,code = <KEY_VOLUMEDOWN>; + linux,code = <KEY_VOLUMEUP>; debounce-interval = <10>; }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi index aff857df25cf..a4264ea41728 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi @@ -190,32 +190,6 @@ nvidia,invert-interrupt; }; - cpus { - cpu@0 { - enable-method = "psci"; - }; - - cpu@1 { - enable-method = "psci"; - }; - - cpu@2 { - enable-method = "psci"; - }; - - cpu@3 { - enable-method = "psci"; - }; - - cpu@4 { - enable-method = "psci"; - }; - - cpu@5 { - enable-method = "psci"; - }; - }; - bpmp { i2c { status = "okay"; @@ -235,6 +209,23 @@ pinctrl-names = "default"; pinctrl-0 = <&max77620_default>; + fps { + fps0 { + maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>; + maxim,shutdown-fps-time-period-us = <640>; + }; + + fps1 { + maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>; + maxim,shutdown-fps-time-period-us = <640>; + }; + + fps2 { + maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>; + maxim,shutdown-fps-time-period-us = <640>; + }; + }; + max77620_default: pinmux { gpio0 { pins = "gpio0"; @@ -284,23 +275,6 @@ }; }; - fps { - fps0 { - maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>; - maxim,shutdown-fps-time-period-us = <640>; - }; - - fps1 { - maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>; - maxim,shutdown-fps-time-period-us = <640>; - }; - - fps2 { - maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>; - maxim,shutdown-fps-time-period-us = <640>; - }; - }; - regulators { in-sd0-supply = <&vdd_5v0_sys>; in-sd1-supply = <&vdd_5v0_sys>; @@ -387,6 +361,32 @@ }; }; + cpus { + cpu@0 { + enable-method = "psci"; + }; + + cpu@1 { + enable-method = "psci"; + }; + + cpu@2 { + enable-method = "psci"; + }; + + cpu@3 { + enable-method = "psci"; + }; + + cpu@4 { + enable-method = "psci"; + }; + + cpu@5 { + enable-method = "psci"; + }; + }; + psci { compatible = "arm,psci-1.0"; status = "okay"; diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts b/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts index 3e83a4d52eb1..26f71651933d 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts +++ b/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts @@ -56,6 +56,490 @@ }; }; + aconnect@2900000 { + status = "okay"; + + ahub@2900800 { + status = "okay"; + + i2s@2901000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s1_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s1_ep>; + }; + }; + + i2s1_port: port@1 { + reg = <1>; + + i2s1_dap_ep: endpoint { + dai-format = "i2s"; + /* Placeholder for external Codec */ + }; + }; + }; + }; + + i2s@2901200 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s3_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s3_ep>; + }; + }; + + i2s3_port: port@1 { + reg = <1>; + + i2s3_dap_ep: endpoint { + dai-format = "i2s"; + /* Placeholder for external Codec */ + }; + }; + }; + }; + + dmic@2904000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dmic1_cif_ep: endpoint { + remote-endpoint = <&xbar_dmic1_ep>; + }; + }; + + dmic1_port: port@1 { + reg = <1>; + + dmic1_dap_ep: endpoint { + /* Place holder for external Codec */ + }; + }; + }; + }; + + dmic@2904100 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dmic2_cif_ep: endpoint { + remote-endpoint = <&xbar_dmic2_ep>; + }; + }; + + dmic2_port: port@1 { + reg = <1>; + + dmic2_dap_ep: endpoint { + /* Place holder for external Codec */ + }; + }; + }; + }; + + admaif@290f000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + admaif0_port: port@0 { + reg = <0x0>; + + admaif0_ep: endpoint { + remote-endpoint = <&xbar_admaif0_ep>; + }; + }; + + admaif1_port: port@1 { + reg = <0x1>; + + admaif1_ep: endpoint { + remote-endpoint = <&xbar_admaif1_ep>; + }; + }; + + admaif2_port: port@2 { + reg = <0x2>; + + admaif2_ep: endpoint { + remote-endpoint = <&xbar_admaif2_ep>; + }; + }; + + admaif3_port: port@3 { + reg = <0x3>; + + admaif3_ep: endpoint { + remote-endpoint = <&xbar_admaif3_ep>; + }; + }; + + admaif4_port: port@4 { + reg = <0x4>; + + admaif4_ep: endpoint { + remote-endpoint = <&xbar_admaif4_ep>; + }; + }; + + admaif5_port: port@5 { + reg = <0x5>; + + admaif5_ep: endpoint { + remote-endpoint = <&xbar_admaif5_ep>; + }; + }; + + admaif6_port: port@6 { + reg = <0x6>; + + admaif6_ep: endpoint { + remote-endpoint = <&xbar_admaif6_ep>; + }; + }; + + admaif7_port: port@7 { + reg = <0x7>; + + admaif7_ep: endpoint { + remote-endpoint = <&xbar_admaif7_ep>; + }; + }; + + admaif8_port: port@8 { + reg = <0x8>; + + admaif8_ep: endpoint { + remote-endpoint = <&xbar_admaif8_ep>; + }; + }; + + admaif9_port: port@9 { + reg = <0x9>; + + admaif9_ep: endpoint { + remote-endpoint = <&xbar_admaif9_ep>; + }; + }; + + admaif10_port: port@a { + reg = <0xa>; + + admaif10_ep: endpoint { + remote-endpoint = <&xbar_admaif10_ep>; + }; + }; + + admaif11_port: port@b { + reg = <0xb>; + + admaif11_ep: endpoint { + remote-endpoint = <&xbar_admaif11_ep>; + }; + }; + + admaif12_port: port@c { + reg = <0xc>; + + admaif12_ep: endpoint { + remote-endpoint = <&xbar_admaif12_ep>; + }; + }; + + admaif13_port: port@d { + reg = <0xd>; + + admaif13_ep: endpoint { + remote-endpoint = <&xbar_admaif13_ep>; + }; + }; + + admaif14_port: port@e { + reg = <0xe>; + + admaif14_ep: endpoint { + remote-endpoint = <&xbar_admaif14_ep>; + }; + }; + + admaif15_port: port@f { + reg = <0xf>; + + admaif15_ep: endpoint { + remote-endpoint = <&xbar_admaif15_ep>; + }; + }; + + admaif16_port: port@10 { + reg = <0x10>; + + admaif16_ep: endpoint { + remote-endpoint = <&xbar_admaif16_ep>; + }; + }; + + admaif17_port: port@11 { + reg = <0x11>; + + admaif17_ep: endpoint { + remote-endpoint = <&xbar_admaif17_ep>; + }; + }; + + admaif18_port: port@12 { + reg = <0x12>; + + admaif18_ep: endpoint { + remote-endpoint = <&xbar_admaif18_ep>; + }; + }; + + admaif19_port: port@13 { + reg = <0x13>; + + admaif19_ep: endpoint { + remote-endpoint = <&xbar_admaif19_ep>; + }; + }; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + + xbar_admaif0_ep: endpoint { + remote-endpoint = <&admaif0_ep>; + }; + }; + + port@1 { + reg = <0x1>; + + xbar_admaif1_ep: endpoint { + remote-endpoint = <&admaif1_ep>; + }; + }; + + port@2 { + reg = <0x2>; + + xbar_admaif2_ep: endpoint { + remote-endpoint = <&admaif2_ep>; + }; + }; + + port@3 { + reg = <0x3>; + + xbar_admaif3_ep: endpoint { + remote-endpoint = <&admaif3_ep>; + }; + }; + + port@4 { + reg = <0x4>; + + xbar_admaif4_ep: endpoint { + remote-endpoint = <&admaif4_ep>; + }; + }; + + port@5 { + reg = <0x5>; + + xbar_admaif5_ep: endpoint { + remote-endpoint = <&admaif5_ep>; + }; + }; + + port@6 { + reg = <0x6>; + + xbar_admaif6_ep: endpoint { + remote-endpoint = <&admaif6_ep>; + }; + }; + + port@7 { + reg = <0x7>; + + xbar_admaif7_ep: endpoint { + remote-endpoint = <&admaif7_ep>; + }; + }; + + port@8 { + reg = <0x8>; + + xbar_admaif8_ep: endpoint { + remote-endpoint = <&admaif8_ep>; + }; + }; + + port@9 { + reg = <0x9>; + + xbar_admaif9_ep: endpoint { + remote-endpoint = <&admaif9_ep>; + }; + }; + + port@a { + reg = <0xa>; + + xbar_admaif10_ep: endpoint { + remote-endpoint = <&admaif10_ep>; + }; + }; + + port@b { + reg = <0xb>; + + xbar_admaif11_ep: endpoint { + remote-endpoint = <&admaif11_ep>; + }; + }; + + port@c { + reg = <0xc>; + + xbar_admaif12_ep: endpoint { + remote-endpoint = <&admaif12_ep>; + }; + }; + + port@d { + reg = <0xd>; + + xbar_admaif13_ep: endpoint { + remote-endpoint = <&admaif13_ep>; + }; + }; + + port@e { + reg = <0xe>; + + xbar_admaif14_ep: endpoint { + remote-endpoint = <&admaif14_ep>; + }; + }; + + port@f { + reg = <0xf>; + + xbar_admaif15_ep: endpoint { + remote-endpoint = <&admaif15_ep>; + }; + }; + + port@10 { + reg = <0x10>; + + xbar_admaif16_ep: endpoint { + remote-endpoint = <&admaif16_ep>; + }; + }; + + port@11 { + reg = <0x11>; + + xbar_admaif17_ep: endpoint { + remote-endpoint = <&admaif17_ep>; + }; + }; + + port@12 { + reg = <0x12>; + + xbar_admaif18_ep: endpoint { + remote-endpoint = <&admaif18_ep>; + }; + }; + + port@13 { + reg = <0x13>; + + xbar_admaif19_ep: endpoint { + remote-endpoint = <&admaif19_ep>; + }; + }; + + xbar_i2s1_port: port@14 { + reg = <0x14>; + + xbar_i2s1_ep: endpoint { + remote-endpoint = <&i2s1_cif_ep>; + }; + }; + + xbar_i2s3_port: port@16 { + reg = <0x16>; + + xbar_i2s3_ep: endpoint { + remote-endpoint = <&i2s3_cif_ep>; + }; + }; + + xbar_dmic1_port: port@1a { + reg = <0x1a>; + + xbar_dmic1_ep: endpoint { + remote-endpoint = <&dmic1_cif_ep>; + }; + }; + + xbar_dmic2_port: port@1b { + reg = <0x1b>; + + xbar_dmic2_ep: endpoint { + remote-endpoint = <&dmic2_cif_ep>; + }; + }; + }; + }; + + dma-controller@2930000 { + status = "okay"; + }; + + interrupt-controller@2a40000 { + status = "okay"; + }; + }; + memory-controller@2c00000 { status = "okay"; }; @@ -349,73 +833,6 @@ status = "okay"; }; - fan: pwm-fan { - compatible = "pwm-fan"; - pwms = <&pwm4 0 45334>; - - cooling-levels = <0 64 128 255>; - #cooling-cells = <2>; - }; - - gpio-keys { - compatible = "gpio-keys"; - - key-power { - label = "Power"; - gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 0) - GPIO_ACTIVE_LOW>; - linux,input-type = <EV_KEY>; - linux,code = <KEY_POWER>; - debounce-interval = <10>; - wakeup-event-action = <EV_ACT_ASSERTED>; - wakeup-source; - }; - - key-volume-up { - label = "Volume Up"; - gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 1) - GPIO_ACTIVE_LOW>; - linux,input-type = <EV_KEY>; - linux,code = <KEY_VOLUMEUP>; - debounce-interval = <10>; - }; - - key-volume-down { - label = "Volume Down"; - gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 2) - GPIO_ACTIVE_LOW>; - linux,input-type = <EV_KEY>; - linux,code = <KEY_VOLUMEDOWN>; - debounce-interval = <10>; - }; - }; - - cpus { - cpu@0 { - enable-method = "psci"; - }; - - cpu@1 { - enable-method = "psci"; - }; - - cpu@2 { - enable-method = "psci"; - }; - - cpu@3 { - enable-method = "psci"; - }; - - cpu@4 { - enable-method = "psci"; - }; - - cpu@5 { - enable-method = "psci"; - }; - }; - bpmp { i2c { status = "okay"; @@ -435,6 +852,23 @@ pinctrl-names = "default"; pinctrl-0 = <&max77620_default>; + fps { + fps0 { + maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>; + maxim,shutdown-fps-time-period-us = <640>; + }; + + fps1 { + maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>; + maxim,shutdown-fps-time-period-us = <640>; + }; + + fps2 { + maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>; + maxim,shutdown-fps-time-period-us = <640>; + }; + }; + max77620_default: pinmux { gpio0 { pins = "gpio0"; @@ -484,23 +918,6 @@ }; }; - fps { - fps0 { - maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>; - maxim,shutdown-fps-time-period-us = <640>; - }; - - fps1 { - maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>; - maxim,shutdown-fps-time-period-us = <640>; - }; - - fps2 { - maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>; - maxim,shutdown-fps-time-period-us = <640>; - }; - }; - regulators { in-sd0-supply = <&vdd_5v0_sys>; in-sd1-supply = <&vdd_5v0_sys>; @@ -587,12 +1004,79 @@ }; }; + cpus { + cpu@0 { + enable-method = "psci"; + }; + + cpu@1 { + enable-method = "psci"; + }; + + cpu@2 { + enable-method = "psci"; + }; + + cpu@3 { + enable-method = "psci"; + }; + + cpu@4 { + enable-method = "psci"; + }; + + cpu@5 { + enable-method = "psci"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + key-power { + label = "Power"; + gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 0) + GPIO_ACTIVE_LOW>; + linux,input-type = <EV_KEY>; + linux,code = <KEY_POWER>; + debounce-interval = <10>; + wakeup-event-action = <EV_ACT_ASSERTED>; + wakeup-source; + }; + + key-volume-down { + label = "Volume Down"; + gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 2) + GPIO_ACTIVE_LOW>; + linux,input-type = <EV_KEY>; + linux,code = <KEY_VOLUMEDOWN>; + debounce-interval = <10>; + }; + + key-volume-up { + label = "Volume Up"; + gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 1) + GPIO_ACTIVE_LOW>; + linux,input-type = <EV_KEY>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <10>; + }; + }; + psci { compatible = "arm,psci-1.0"; status = "okay"; method = "smc"; }; + fan: pwm-fan { + compatible = "pwm-fan"; + pwms = <&pwm4 0 45334>; + + cooling-levels = <0 64 128 255>; + #cooling-cells = <2>; + }; + gnd: regulator-gnd { compatible = "regulator-fixed"; regulator-name = "GND"; @@ -632,6 +1116,26 @@ vin-supply = <&vdd_5v0_sys>; }; + sound { + compatible = "nvidia,tegra186-audio-graph-card"; + status = "okay"; + + dais = /* FE */ + <&admaif0_port>, <&admaif1_port>, <&admaif2_port>, <&admaif3_port>, + <&admaif4_port>, <&admaif5_port>, <&admaif6_port>, <&admaif7_port>, + <&admaif8_port>, <&admaif9_port>, <&admaif10_port>, <&admaif11_port>, + <&admaif12_port>, <&admaif13_port>, <&admaif14_port>, <&admaif15_port>, + <&admaif16_port>, <&admaif17_port>, <&admaif18_port>, <&admaif19_port>, + /* Router */ + <&xbar_i2s1_port>, <&xbar_i2s3_port>, + <&xbar_dmic1_port>, <&xbar_dmic2_port>, + /* I/O */ + <&i2s1_port>, <&i2s3_port>, + <&dmic1_port>, <&dmic2_port>; + + label = "NVIDIA Jetson TX2 NX APE"; + }; + thermal-zones { cpu-thermal { polling-delay = <0>; @@ -715,508 +1219,4 @@ }; }; }; - - aconnect@2900000 { - status = "okay"; - - dma-controller@2930000 { - status = "okay"; - }; - - interrupt-controller@2a40000 { - status = "okay"; - }; - - ahub@2900800 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0x0>; - - xbar_admaif0_ep: endpoint { - remote-endpoint = <&admaif0_ep>; - }; - }; - - port@1 { - reg = <0x1>; - - xbar_admaif1_ep: endpoint { - remote-endpoint = <&admaif1_ep>; - }; - }; - - port@2 { - reg = <0x2>; - - xbar_admaif2_ep: endpoint { - remote-endpoint = <&admaif2_ep>; - }; - }; - - port@3 { - reg = <0x3>; - - xbar_admaif3_ep: endpoint { - remote-endpoint = <&admaif3_ep>; - }; - }; - - port@4 { - reg = <0x4>; - - xbar_admaif4_ep: endpoint { - remote-endpoint = <&admaif4_ep>; - }; - }; - - port@5 { - reg = <0x5>; - - xbar_admaif5_ep: endpoint { - remote-endpoint = <&admaif5_ep>; - }; - }; - - port@6 { - reg = <0x6>; - - xbar_admaif6_ep: endpoint { - remote-endpoint = <&admaif6_ep>; - }; - }; - - port@7 { - reg = <0x7>; - - xbar_admaif7_ep: endpoint { - remote-endpoint = <&admaif7_ep>; - }; - }; - - port@8 { - reg = <0x8>; - - xbar_admaif8_ep: endpoint { - remote-endpoint = <&admaif8_ep>; - }; - }; - - port@9 { - reg = <0x9>; - - xbar_admaif9_ep: endpoint { - remote-endpoint = <&admaif9_ep>; - }; - }; - - port@a { - reg = <0xa>; - - xbar_admaif10_ep: endpoint { - remote-endpoint = <&admaif10_ep>; - }; - }; - - port@b { - reg = <0xb>; - - xbar_admaif11_ep: endpoint { - remote-endpoint = <&admaif11_ep>; - }; - }; - - port@c { - reg = <0xc>; - - xbar_admaif12_ep: endpoint { - remote-endpoint = <&admaif12_ep>; - }; - }; - - port@d { - reg = <0xd>; - - xbar_admaif13_ep: endpoint { - remote-endpoint = <&admaif13_ep>; - }; - }; - - port@e { - reg = <0xe>; - - xbar_admaif14_ep: endpoint { - remote-endpoint = <&admaif14_ep>; - }; - }; - - port@f { - reg = <0xf>; - - xbar_admaif15_ep: endpoint { - remote-endpoint = <&admaif15_ep>; - }; - }; - - port@10 { - reg = <0x10>; - - xbar_admaif16_ep: endpoint { - remote-endpoint = <&admaif16_ep>; - }; - }; - - port@11 { - reg = <0x11>; - - xbar_admaif17_ep: endpoint { - remote-endpoint = <&admaif17_ep>; - }; - }; - - port@12 { - reg = <0x12>; - - xbar_admaif18_ep: endpoint { - remote-endpoint = <&admaif18_ep>; - }; - }; - - port@13 { - reg = <0x13>; - - xbar_admaif19_ep: endpoint { - remote-endpoint = <&admaif19_ep>; - }; - }; - - xbar_i2s1_port: port@14 { - reg = <0x14>; - - xbar_i2s1_ep: endpoint { - remote-endpoint = <&i2s1_cif_ep>; - }; - }; - - xbar_i2s3_port: port@16 { - reg = <0x16>; - - xbar_i2s3_ep: endpoint { - remote-endpoint = <&i2s3_cif_ep>; - }; - }; - - xbar_dmic1_port: port@1a { - reg = <0x1a>; - - xbar_dmic1_ep: endpoint { - remote-endpoint = <&dmic1_cif_ep>; - }; - }; - - xbar_dmic2_port: port@1b { - reg = <0x1b>; - - xbar_dmic2_ep: endpoint { - remote-endpoint = <&dmic2_cif_ep>; - }; - }; - }; - - admaif@290f000 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - admaif0_port: port@0 { - reg = <0x0>; - - admaif0_ep: endpoint { - remote-endpoint = <&xbar_admaif0_ep>; - }; - }; - - admaif1_port: port@1 { - reg = <0x1>; - - admaif1_ep: endpoint { - remote-endpoint = <&xbar_admaif1_ep>; - }; - }; - - admaif2_port: port@2 { - reg = <0x2>; - - admaif2_ep: endpoint { - remote-endpoint = <&xbar_admaif2_ep>; - }; - }; - - admaif3_port: port@3 { - reg = <0x3>; - - admaif3_ep: endpoint { - remote-endpoint = <&xbar_admaif3_ep>; - }; - }; - - admaif4_port: port@4 { - reg = <0x4>; - - admaif4_ep: endpoint { - remote-endpoint = <&xbar_admaif4_ep>; - }; - }; - - admaif5_port: port@5 { - reg = <0x5>; - - admaif5_ep: endpoint { - remote-endpoint = <&xbar_admaif5_ep>; - }; - }; - - admaif6_port: port@6 { - reg = <0x6>; - - admaif6_ep: endpoint { - remote-endpoint = <&xbar_admaif6_ep>; - }; - }; - - admaif7_port: port@7 { - reg = <0x7>; - - admaif7_ep: endpoint { - remote-endpoint = <&xbar_admaif7_ep>; - }; - }; - - admaif8_port: port@8 { - reg = <0x8>; - - admaif8_ep: endpoint { - remote-endpoint = <&xbar_admaif8_ep>; - }; - }; - - admaif9_port: port@9 { - reg = <0x9>; - - admaif9_ep: endpoint { - remote-endpoint = <&xbar_admaif9_ep>; - }; - }; - - admaif10_port: port@a { - reg = <0xa>; - - admaif10_ep: endpoint { - remote-endpoint = <&xbar_admaif10_ep>; - }; - }; - - admaif11_port: port@b { - reg = <0xb>; - - admaif11_ep: endpoint { - remote-endpoint = <&xbar_admaif11_ep>; - }; - }; - - admaif12_port: port@c { - reg = <0xc>; - - admaif12_ep: endpoint { - remote-endpoint = <&xbar_admaif12_ep>; - }; - }; - - admaif13_port: port@d { - reg = <0xd>; - - admaif13_ep: endpoint { - remote-endpoint = <&xbar_admaif13_ep>; - }; - }; - - admaif14_port: port@e { - reg = <0xe>; - - admaif14_ep: endpoint { - remote-endpoint = <&xbar_admaif14_ep>; - }; - }; - - admaif15_port: port@f { - reg = <0xf>; - - admaif15_ep: endpoint { - remote-endpoint = <&xbar_admaif15_ep>; - }; - }; - - admaif16_port: port@10 { - reg = <0x10>; - - admaif16_ep: endpoint { - remote-endpoint = <&xbar_admaif16_ep>; - }; - }; - - admaif17_port: port@11 { - reg = <0x11>; - - admaif17_ep: endpoint { - remote-endpoint = <&xbar_admaif17_ep>; - }; - }; - - admaif18_port: port@12 { - reg = <0x12>; - - admaif18_ep: endpoint { - remote-endpoint = <&xbar_admaif18_ep>; - }; - }; - - admaif19_port: port@13 { - reg = <0x13>; - - admaif19_ep: endpoint { - remote-endpoint = <&xbar_admaif19_ep>; - }; - }; - }; - }; - - i2s@2901000 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - i2s1_cif_ep: endpoint { - remote-endpoint = <&xbar_i2s1_ep>; - }; - }; - - i2s1_port: port@1 { - reg = <1>; - - i2s1_dap_ep: endpoint { - dai-format = "i2s"; - /* Placeholder for external Codec */ - }; - }; - }; - }; - - i2s@2901200 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - i2s3_cif_ep: endpoint { - remote-endpoint = <&xbar_i2s3_ep>; - }; - }; - - i2s3_port: port@1 { - reg = <1>; - - i2s3_dap_ep: endpoint { - dai-format = "i2s"; - /* Placeholder for external Codec */ - }; - }; - }; - }; - - dmic@2904000 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - dmic1_cif_ep: endpoint { - remote-endpoint = <&xbar_dmic1_ep>; - }; - }; - - dmic1_port: port@1 { - reg = <1>; - - dmic1_dap_ep: endpoint { - /* Place holder for external Codec */ - }; - }; - }; - }; - - dmic@2904100 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - dmic2_cif_ep: endpoint { - remote-endpoint = <&xbar_dmic2_ep>; - }; - }; - - dmic2_port: port@1 { - reg = <1>; - - dmic2_dap_ep: endpoint { - /* Place holder for external Codec */ - }; - }; - }; - }; - }; - }; - - sound { - compatible = "nvidia,tegra186-audio-graph-card"; - status = "okay"; - - dais = /* FE */ - <&admaif0_port>, <&admaif1_port>, <&admaif2_port>, <&admaif3_port>, - <&admaif4_port>, <&admaif5_port>, <&admaif6_port>, <&admaif7_port>, - <&admaif8_port>, <&admaif9_port>, <&admaif10_port>, <&admaif11_port>, - <&admaif12_port>, <&admaif13_port>, <&admaif14_port>, <&admaif15_port>, - <&admaif16_port>, <&admaif17_port>, <&admaif18_port>, <&admaif19_port>, - /* Router */ - <&xbar_i2s1_port>, <&xbar_i2s3_port>, - <&xbar_dmic1_port>, <&xbar_dmic2_port>, - /* I/O */ - <&i2s1_port>, <&i2s3_port>, - <&dmic1_port>, <&dmic2_port>; - - label = "NVIDIA Jetson TX2 NX APE"; - }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi index b3f1494c02c1..efc450821398 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi @@ -129,62 +129,6 @@ ranges = <0x02900000 0x0 0x02900000 0x200000>; status = "disabled"; - adma: dma-controller@2930000 { - compatible = "nvidia,tegra186-adma"; - reg = <0x02930000 0x20000>; - interrupt-parent = <&agic>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; - #dma-cells = <1>; - clocks = <&bpmp TEGRA186_CLK_AHUB>; - clock-names = "d_audio"; - status = "disabled"; - }; - - agic: interrupt-controller@2a40000 { - compatible = "nvidia,tegra186-agic", - "nvidia,tegra210-agic"; - #interrupt-cells = <3>; - interrupt-controller; - reg = <0x02a41000 0x1000>, - <0x02a42000 0x2000>; - interrupts = <GIC_SPI 145 - (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; - clocks = <&bpmp TEGRA186_CLK_APE>; - clock-names = "clk"; - status = "disabled"; - }; - tegra_ahub: ahub@2900800 { compatible = "nvidia,tegra186-ahub"; reg = <0x02900800 0x800>; @@ -197,52 +141,6 @@ ranges = <0x02900800 0x02900800 0x11800>; status = "disabled"; - tegra_admaif: admaif@290f000 { - compatible = "nvidia,tegra186-admaif"; - reg = <0x0290f000 0x1000>; - dmas = <&adma 1>, <&adma 1>, - <&adma 2>, <&adma 2>, - <&adma 3>, <&adma 3>, - <&adma 4>, <&adma 4>, - <&adma 5>, <&adma 5>, - <&adma 6>, <&adma 6>, - <&adma 7>, <&adma 7>, - <&adma 8>, <&adma 8>, - <&adma 9>, <&adma 9>, - <&adma 10>, <&adma 10>, - <&adma 11>, <&adma 11>, - <&adma 12>, <&adma 12>, - <&adma 13>, <&adma 13>, - <&adma 14>, <&adma 14>, - <&adma 15>, <&adma 15>, - <&adma 16>, <&adma 16>, - <&adma 17>, <&adma 17>, - <&adma 18>, <&adma 18>, - <&adma 19>, <&adma 19>, - <&adma 20>, <&adma 20>; - dma-names = "rx1", "tx1", - "rx2", "tx2", - "rx3", "tx3", - "rx4", "tx4", - "rx5", "tx5", - "rx6", "tx6", - "rx7", "tx7", - "rx8", "tx8", - "rx9", "tx9", - "rx10", "tx10", - "rx11", "tx11", - "rx12", "tx12", - "rx13", "tx13", - "rx14", "tx14", - "rx15", "tx15", - "rx16", "tx16", - "rx17", "tx17", - "rx18", "tx18", - "rx19", "tx19", - "rx20", "tx20"; - status = "disabled"; - }; - tegra_i2s1: i2s@2901000 { compatible = "nvidia,tegra186-i2s", "nvidia,tegra210-i2s"; @@ -327,78 +225,6 @@ status = "disabled"; }; - tegra_dmic1: dmic@2904000 { - compatible = "nvidia,tegra210-dmic"; - reg = <0x2904000 0x100>; - clocks = <&bpmp TEGRA186_CLK_DMIC1>; - clock-names = "dmic"; - assigned-clocks = <&bpmp TEGRA186_CLK_DMIC1>; - assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>; - assigned-clock-rates = <3072000>; - sound-name-prefix = "DMIC1"; - status = "disabled"; - }; - - tegra_dmic2: dmic@2904100 { - compatible = "nvidia,tegra210-dmic"; - reg = <0x2904100 0x100>; - clocks = <&bpmp TEGRA186_CLK_DMIC2>; - clock-names = "dmic"; - assigned-clocks = <&bpmp TEGRA186_CLK_DMIC2>; - assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>; - assigned-clock-rates = <3072000>; - sound-name-prefix = "DMIC2"; - status = "disabled"; - }; - - tegra_dmic3: dmic@2904200 { - compatible = "nvidia,tegra210-dmic"; - reg = <0x2904200 0x100>; - clocks = <&bpmp TEGRA186_CLK_DMIC3>; - clock-names = "dmic"; - assigned-clocks = <&bpmp TEGRA186_CLK_DMIC3>; - assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>; - assigned-clock-rates = <3072000>; - sound-name-prefix = "DMIC3"; - status = "disabled"; - }; - - tegra_dmic4: dmic@2904300 { - compatible = "nvidia,tegra210-dmic"; - reg = <0x2904300 0x100>; - clocks = <&bpmp TEGRA186_CLK_DMIC4>; - clock-names = "dmic"; - assigned-clocks = <&bpmp TEGRA186_CLK_DMIC4>; - assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>; - assigned-clock-rates = <3072000>; - sound-name-prefix = "DMIC4"; - status = "disabled"; - }; - - tegra_dspk1: dspk@2905000 { - compatible = "nvidia,tegra186-dspk"; - reg = <0x2905000 0x100>; - clocks = <&bpmp TEGRA186_CLK_DSPK1>; - clock-names = "dspk"; - assigned-clocks = <&bpmp TEGRA186_CLK_DSPK1>; - assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>; - assigned-clock-rates = <12288000>; - sound-name-prefix = "DSPK1"; - status = "disabled"; - }; - - tegra_dspk2: dspk@2905100 { - compatible = "nvidia,tegra186-dspk"; - reg = <0x2905100 0x100>; - clocks = <&bpmp TEGRA186_CLK_DSPK2>; - clock-names = "dspk"; - assigned-clocks = <&bpmp TEGRA186_CLK_DSPK2>; - assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>; - assigned-clock-rates = <12288000>; - sound-name-prefix = "DSPK2"; - status = "disabled"; - }; - tegra_sfc1: sfc@2902000 { compatible = "nvidia,tegra186-sfc", "nvidia,tegra210-sfc"; @@ -431,22 +257,6 @@ status = "disabled"; }; - tegra_mvc1: mvc@290a000 { - compatible = "nvidia,tegra186-mvc", - "nvidia,tegra210-mvc"; - reg = <0x290a000 0x200>; - sound-name-prefix = "MVC1"; - status = "disabled"; - }; - - tegra_mvc2: mvc@290a200 { - compatible = "nvidia,tegra186-mvc", - "nvidia,tegra210-mvc"; - reg = <0x290a200 0x200>; - sound-name-prefix = "MVC2"; - status = "disabled"; - }; - tegra_amx1: amx@2903000 { compatible = "nvidia,tegra186-amx", "nvidia,tegra210-amx"; @@ -511,6 +321,78 @@ status = "disabled"; }; + tegra_dmic1: dmic@2904000 { + compatible = "nvidia,tegra210-dmic"; + reg = <0x2904000 0x100>; + clocks = <&bpmp TEGRA186_CLK_DMIC1>; + clock-names = "dmic"; + assigned-clocks = <&bpmp TEGRA186_CLK_DMIC1>; + assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>; + assigned-clock-rates = <3072000>; + sound-name-prefix = "DMIC1"; + status = "disabled"; + }; + + tegra_dmic2: dmic@2904100 { + compatible = "nvidia,tegra210-dmic"; + reg = <0x2904100 0x100>; + clocks = <&bpmp TEGRA186_CLK_DMIC2>; + clock-names = "dmic"; + assigned-clocks = <&bpmp TEGRA186_CLK_DMIC2>; + assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>; + assigned-clock-rates = <3072000>; + sound-name-prefix = "DMIC2"; + status = "disabled"; + }; + + tegra_dmic3: dmic@2904200 { + compatible = "nvidia,tegra210-dmic"; + reg = <0x2904200 0x100>; + clocks = <&bpmp TEGRA186_CLK_DMIC3>; + clock-names = "dmic"; + assigned-clocks = <&bpmp TEGRA186_CLK_DMIC3>; + assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>; + assigned-clock-rates = <3072000>; + sound-name-prefix = "DMIC3"; + status = "disabled"; + }; + + tegra_dmic4: dmic@2904300 { + compatible = "nvidia,tegra210-dmic"; + reg = <0x2904300 0x100>; + clocks = <&bpmp TEGRA186_CLK_DMIC4>; + clock-names = "dmic"; + assigned-clocks = <&bpmp TEGRA186_CLK_DMIC4>; + assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>; + assigned-clock-rates = <3072000>; + sound-name-prefix = "DMIC4"; + status = "disabled"; + }; + + tegra_dspk1: dspk@2905000 { + compatible = "nvidia,tegra186-dspk"; + reg = <0x2905000 0x100>; + clocks = <&bpmp TEGRA186_CLK_DSPK1>; + clock-names = "dspk"; + assigned-clocks = <&bpmp TEGRA186_CLK_DSPK1>; + assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>; + assigned-clock-rates = <12288000>; + sound-name-prefix = "DSPK1"; + status = "disabled"; + }; + + tegra_dspk2: dspk@2905100 { + compatible = "nvidia,tegra186-dspk"; + reg = <0x2905100 0x100>; + clocks = <&bpmp TEGRA186_CLK_DSPK2>; + clock-names = "dspk"; + assigned-clocks = <&bpmp TEGRA186_CLK_DSPK2>; + assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>; + assigned-clock-rates = <12288000>; + sound-name-prefix = "DSPK2"; + status = "disabled"; + }; + tegra_ope1: processing-engine@2908000 { compatible = "nvidia,tegra186-ope", "nvidia,tegra210-ope"; @@ -534,6 +416,22 @@ }; }; + tegra_mvc1: mvc@290a000 { + compatible = "nvidia,tegra186-mvc", + "nvidia,tegra210-mvc"; + reg = <0x290a000 0x200>; + sound-name-prefix = "MVC1"; + status = "disabled"; + }; + + tegra_mvc2: mvc@290a200 { + compatible = "nvidia,tegra186-mvc", + "nvidia,tegra210-mvc"; + reg = <0x290a200 0x200>; + sound-name-prefix = "MVC2"; + status = "disabled"; + }; + tegra_amixer: amixer@290bb00 { compatible = "nvidia,tegra186-amixer", "nvidia,tegra210-amixer"; @@ -542,6 +440,52 @@ status = "disabled"; }; + tegra_admaif: admaif@290f000 { + compatible = "nvidia,tegra186-admaif"; + reg = <0x0290f000 0x1000>; + dmas = <&adma 1>, <&adma 1>, + <&adma 2>, <&adma 2>, + <&adma 3>, <&adma 3>, + <&adma 4>, <&adma 4>, + <&adma 5>, <&adma 5>, + <&adma 6>, <&adma 6>, + <&adma 7>, <&adma 7>, + <&adma 8>, <&adma 8>, + <&adma 9>, <&adma 9>, + <&adma 10>, <&adma 10>, + <&adma 11>, <&adma 11>, + <&adma 12>, <&adma 12>, + <&adma 13>, <&adma 13>, + <&adma 14>, <&adma 14>, + <&adma 15>, <&adma 15>, + <&adma 16>, <&adma 16>, + <&adma 17>, <&adma 17>, + <&adma 18>, <&adma 18>, + <&adma 19>, <&adma 19>, + <&adma 20>, <&adma 20>; + dma-names = "rx1", "tx1", + "rx2", "tx2", + "rx3", "tx3", + "rx4", "tx4", + "rx5", "tx5", + "rx6", "tx6", + "rx7", "tx7", + "rx8", "tx8", + "rx9", "tx9", + "rx10", "tx10", + "rx11", "tx11", + "rx12", "tx12", + "rx13", "tx13", + "rx14", "tx14", + "rx15", "tx15", + "rx16", "tx16", + "rx17", "tx17", + "rx18", "tx18", + "rx19", "tx19", + "rx20", "tx20"; + status = "disabled"; + }; + tegra_asrc: asrc@2910000 { compatible = "nvidia,tegra186-asrc"; reg = <0x2910000 0x2000>; @@ -549,6 +493,62 @@ status = "disabled"; }; }; + + adma: dma-controller@2930000 { + compatible = "nvidia,tegra186-adma"; + reg = <0x02930000 0x20000>; + interrupt-parent = <&agic>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + clocks = <&bpmp TEGRA186_CLK_AHUB>; + clock-names = "d_audio"; + status = "disabled"; + }; + + agic: interrupt-controller@2a40000 { + compatible = "nvidia,tegra186-agic", + "nvidia,tegra210-agic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x02a41000 0x1000>, + <0x02a42000 0x2000>; + interrupts = <GIC_SPI 145 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&bpmp TEGRA186_CLK_APE>; + clock-names = "clk"; + status = "disabled"; + }; }; mc: memory-controller@2c00000 { @@ -674,8 +674,6 @@ clock-names = "div-clk"; resets = <&bpmp TEGRA186_RESET_I2C1>; reset-names = "i2c"; - iommus = <&smmu TEGRA186_SID_GPCDMA_0>; - dma-coherent; dmas = <&gpcdma 21>, <&gpcdma 21>; dma-names = "rx", "tx"; status = "disabled"; @@ -691,8 +689,6 @@ clock-names = "div-clk"; resets = <&bpmp TEGRA186_RESET_I2C3>; reset-names = "i2c"; - iommus = <&smmu TEGRA186_SID_GPCDMA_0>; - dma-coherent; dmas = <&gpcdma 23>, <&gpcdma 23>; dma-names = "rx", "tx"; status = "disabled"; @@ -712,8 +708,6 @@ pinctrl-names = "default", "idle"; pinctrl-0 = <&state_dpaux1_i2c>; pinctrl-1 = <&state_dpaux1_off>; - iommus = <&smmu TEGRA186_SID_GPCDMA_0>; - dma-coherent; dmas = <&gpcdma 26>, <&gpcdma 26>; dma-names = "rx", "tx"; status = "disabled"; @@ -747,8 +741,6 @@ pinctrl-names = "default", "idle"; pinctrl-0 = <&state_dpaux_i2c>; pinctrl-1 = <&state_dpaux_off>; - iommus = <&smmu TEGRA186_SID_GPCDMA_0>; - dma-coherent; dmas = <&gpcdma 30>, <&gpcdma 30>; dma-names = "rx", "tx"; status = "disabled"; @@ -764,8 +756,6 @@ clock-names = "div-clk"; resets = <&bpmp TEGRA186_RESET_I2C7>; reset-names = "i2c"; - iommus = <&smmu TEGRA186_SID_GPCDMA_0>; - dma-coherent; dmas = <&gpcdma 27>, <&gpcdma 27>; dma-names = "rx", "tx"; status = "disabled"; @@ -781,8 +771,6 @@ clock-names = "div-clk"; resets = <&bpmp TEGRA186_RESET_I2C9>; reset-names = "i2c"; - iommus = <&smmu TEGRA186_SID_GPCDMA_0>; - dma-coherent; dmas = <&gpcdma 31>, <&gpcdma 31>; dma-names = "rx", "tx"; status = "disabled"; @@ -970,6 +958,34 @@ status = "disabled"; }; + sata@3507000 { + compatible = "nvidia,tegra186-ahci"; + reg = <0x0 0x03507000 0x0 0x00002000>, /* AHCI */ + <0x0 0x03500000 0x0 0x00007000>, /* SATA */ + <0x0 0x03A90000 0x0 0x00010000>; /* SATA AUX */ + interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; + + power-domains = <&bpmp TEGRA186_POWER_DOMAIN_SAX>; + interconnects = <&mc TEGRA186_MEMORY_CLIENT_SATAR &emc>, + <&mc TEGRA186_MEMORY_CLIENT_SATAW &emc>; + interconnect-names = "dma-mem", "write"; + iommus = <&smmu TEGRA186_SID_SATA>; + + clocks = <&bpmp TEGRA186_CLK_SATA>, + <&bpmp TEGRA186_CLK_SATA_OOB>; + clock-names = "sata", "sata-oob"; + assigned-clocks = <&bpmp TEGRA186_CLK_SATA>, + <&bpmp TEGRA186_CLK_SATA_OOB>; + assigned-clock-parents = <&bpmp TEGRA186_CLK_PLLP_OUT0>, + <&bpmp TEGRA186_CLK_PLLP>; + assigned-clock-rates = <102000000>, + <204000000>; + resets = <&bpmp TEGRA186_RESET_SATA>, + <&bpmp TEGRA186_RESET_SATACOLD>; + reset-names = "sata", "sata-cold"; + status = "disabled"; + }; + hda@3510000 { compatible = "nvidia,tegra186-hda", "nvidia,tegra30-hda"; reg = <0x0 0x03510000 0x0 0x10000>; @@ -1195,8 +1211,6 @@ clock-names = "div-clk"; resets = <&bpmp TEGRA186_RESET_I2C2>; reset-names = "i2c"; - iommus = <&smmu TEGRA186_SID_GPCDMA_0>; - dma-coherent; dmas = <&gpcdma 22>, <&gpcdma 22>; dma-names = "rx", "tx"; status = "disabled"; @@ -1212,8 +1226,6 @@ clock-names = "div-clk"; resets = <&bpmp TEGRA186_RESET_I2C8>; reset-names = "i2c"; - iommus = <&smmu TEGRA186_SID_GPCDMA_0>; - dma-coherent; dmas = <&gpcdma 0>, <&gpcdma 0>; dma-names = "rx", "tx"; status = "disabled"; @@ -1286,18 +1298,13 @@ #interrupt-cells = <2>; interrupt-controller; - sdmmc1_3v3: sdmmc1-3v3 { - pins = "sdmmc1-hv"; - power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>; - }; - sdmmc1_1v8: sdmmc1-1v8 { pins = "sdmmc1-hv"; power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>; }; - sdmmc2_3v3: sdmmc2-3v3 { - pins = "sdmmc2-hv"; + sdmmc1_3v3: sdmmc1-3v3 { + pins = "sdmmc1-hv"; power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>; }; @@ -1306,8 +1313,8 @@ power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>; }; - sdmmc3_3v3: sdmmc3-3v3 { - pins = "sdmmc3-hv"; + sdmmc2_3v3: sdmmc2-3v3 { + pins = "sdmmc2-hv"; power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>; }; @@ -1315,6 +1322,11 @@ pins = "sdmmc3-hv"; power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>; }; + + sdmmc3_3v3: sdmmc3-3v3 { + pins = "sdmmc3-hv"; + power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>; + }; }; ccplex@e000000 { @@ -1894,34 +1906,6 @@ }; }; - sata@3507000 { - compatible = "nvidia,tegra186-ahci"; - reg = <0x0 0x03507000 0x0 0x00002000>, /* AHCI */ - <0x0 0x03500000 0x0 0x00007000>, /* SATA */ - <0x0 0x03A90000 0x0 0x00010000>; /* SATA AUX */ - interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; - - power-domains = <&bpmp TEGRA186_POWER_DOMAIN_SAX>; - interconnects = <&mc TEGRA186_MEMORY_CLIENT_SATAR &emc>, - <&mc TEGRA186_MEMORY_CLIENT_SATAW &emc>; - interconnect-names = "dma-mem", "write"; - iommus = <&smmu TEGRA186_SID_SATA>; - - clocks = <&bpmp TEGRA186_CLK_SATA>, - <&bpmp TEGRA186_CLK_SATA_OOB>; - clock-names = "sata", "sata-oob"; - assigned-clocks = <&bpmp TEGRA186_CLK_SATA>, - <&bpmp TEGRA186_CLK_SATA_OOB>; - assigned-clock-parents = <&bpmp TEGRA186_CLK_PLLP_OUT0>, - <&bpmp TEGRA186_CLK_PLLP>; - assigned-clock-rates = <102000000>, - <204000000>; - resets = <&bpmp TEGRA186_RESET_SATA>, - <&bpmp TEGRA186_RESET_SATACOLD>; - reset-names = "sata", "sata-cold"; - status = "disabled"; - }; - bpmp: bpmp { compatible = "nvidia,tegra186-bpmp"; interconnects = <&mc TEGRA186_MEMORY_CLIENT_BPMPR &emc>, @@ -2052,14 +2036,7 @@ }; }; - pmu_denver { - compatible = "nvidia,denver-pmu"; - interrupts = <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>; - interrupt-affinity = <&denver_0 &denver_1>; - }; - - pmu_a57 { + pmu-a57 { compatible = "arm,cortex-a57-pmu"; interrupts = <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>, @@ -2068,6 +2045,13 @@ interrupt-affinity = <&ca57_0 &ca57_1 &ca57_2 &ca57_3>; }; + pmu-denver { + compatible = "nvidia,denver-pmu"; + interrupts = <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&denver_0 &denver_1>; + }; + sound { status = "disabled"; diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi index cd272d407e01..5b59c1986e9b 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi @@ -147,6 +147,24 @@ pinctrl-names = "default"; pinctrl-0 = <&max20024_default>; + fps { + fps0 { + maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>; + maxim,shutdown-fps-time-period-us = <640>; + }; + + fps1 { + maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>; + maxim,shutdown-fps-time-period-us = <640>; + maxim,device-state-on-disabled-event = <MAX77620_FPS_INACTIVE_STATE_SLEEP>; + }; + + fps2 { + maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>; + maxim,shutdown-fps-time-period-us = <640>; + }; + }; + max20024_default: pinmux { gpio0 { pins = "gpio0"; @@ -190,24 +208,6 @@ }; }; - fps { - fps0 { - maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>; - maxim,shutdown-fps-time-period-us = <640>; - }; - - fps1 { - maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>; - maxim,shutdown-fps-time-period-us = <640>; - maxim,device-state-on-disabled-event = <MAX77620_FPS_INACTIVE_STATE_SLEEP>; - }; - - fps2 { - maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>; - maxim,shutdown-fps-time-period-us = <640>; - }; - }; - regulators { in-sd0-supply = <&vdd_5v0_sys>; in-sd1-supply = <&vdd_5v0_sys>; diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts index bc1041d11f6d..64a3398fe7a6 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts @@ -14,16 +14,1115 @@ aconnect@2900000 { status = "okay"; - dma-controller@2930000 { + ahub@2900800 { status = "okay"; - }; - interrupt-controller@2a40000 { - status = "okay"; - }; + i2s@2901000 { + status = "okay"; - ahub@2900800 { - status = "okay"; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s1_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s1_ep>; + }; + }; + + i2s1_port: port@1 { + reg = <1>; + + i2s1_dap_ep: endpoint { + dai-format = "i2s"; + remote-endpoint = <&rt5658_ep>; + }; + }; + }; + }; + + i2s@2901100 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s2_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s2_ep>; + }; + }; + + i2s2_port: port@1 { + reg = <1>; + + i2s2_dap_ep: endpoint { + dai-format = "i2s"; + /* Place holder for external Codec */ + }; + }; + }; + }; + + i2s@2901300 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s4_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s4_ep>; + }; + }; + + i2s4_port: port@1 { + reg = <1>; + + i2s4_dap_ep: endpoint { + dai-format = "i2s"; + /* Place holder for external Codec */ + }; + }; + }; + }; + + i2s@2901500 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s6_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s6_ep>; + }; + }; + + i2s6_port: port@1 { + reg = <1>; + + i2s6_dap_ep: endpoint { + dai-format = "i2s"; + /* Place holder for external Codec */ + }; + }; + }; + }; + + sfc@2902000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sfc1_cif_in_ep: endpoint { + remote-endpoint = <&xbar_sfc1_in_ep>; + }; + }; + + sfc1_out_port: port@1 { + reg = <1>; + + sfc1_cif_out_ep: endpoint { + remote-endpoint = <&xbar_sfc1_out_ep>; + }; + }; + }; + }; + + sfc@2902200 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sfc2_cif_in_ep: endpoint { + remote-endpoint = <&xbar_sfc2_in_ep>; + }; + }; + + sfc2_out_port: port@1 { + reg = <1>; + + sfc2_cif_out_ep: endpoint { + remote-endpoint = <&xbar_sfc2_out_ep>; + }; + }; + }; + }; + + sfc@2902400 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sfc3_cif_in_ep: endpoint { + remote-endpoint = <&xbar_sfc3_in_ep>; + }; + }; + + sfc3_out_port: port@1 { + reg = <1>; + + sfc3_cif_out_ep: endpoint { + remote-endpoint = <&xbar_sfc3_out_ep>; + }; + }; + }; + }; + + sfc@2902600 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sfc4_cif_in_ep: endpoint { + remote-endpoint = <&xbar_sfc4_in_ep>; + }; + }; + + sfc4_out_port: port@1 { + reg = <1>; + + sfc4_cif_out_ep: endpoint { + remote-endpoint = <&xbar_sfc4_out_ep>; + }; + }; + }; + }; + + amx@2903000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + amx1_in1_ep: endpoint { + remote-endpoint = <&xbar_amx1_in1_ep>; + }; + }; + + port@1 { + reg = <1>; + + amx1_in2_ep: endpoint { + remote-endpoint = <&xbar_amx1_in2_ep>; + }; + }; + + port@2 { + reg = <2>; + + amx1_in3_ep: endpoint { + remote-endpoint = <&xbar_amx1_in3_ep>; + }; + }; + + port@3 { + reg = <3>; + + amx1_in4_ep: endpoint { + remote-endpoint = <&xbar_amx1_in4_ep>; + }; + }; + + amx1_out_port: port@4 { + reg = <4>; + + amx1_out_ep: endpoint { + remote-endpoint = <&xbar_amx1_out_ep>; + }; + }; + }; + }; + + amx@2903100 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + amx2_in1_ep: endpoint { + remote-endpoint = <&xbar_amx2_in1_ep>; + }; + }; + + port@1 { + reg = <1>; + + amx2_in2_ep: endpoint { + remote-endpoint = <&xbar_amx2_in2_ep>; + }; + }; + + amx2_in3_port: port@2 { + reg = <2>; + + amx2_in3_ep: endpoint { + remote-endpoint = <&xbar_amx2_in3_ep>; + }; + }; + + amx2_in4_port: port@3 { + reg = <3>; + + amx2_in4_ep: endpoint { + remote-endpoint = <&xbar_amx2_in4_ep>; + }; + }; + + amx2_out_port: port@4 { + reg = <4>; + + amx2_out_ep: endpoint { + remote-endpoint = <&xbar_amx2_out_ep>; + }; + }; + }; + }; + + amx@2903200 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + amx3_in1_ep: endpoint { + remote-endpoint = <&xbar_amx3_in1_ep>; + }; + }; + + port@1 { + reg = <1>; + + amx3_in2_ep: endpoint { + remote-endpoint = <&xbar_amx3_in2_ep>; + }; + }; + + port@2 { + reg = <2>; + + amx3_in3_ep: endpoint { + remote-endpoint = <&xbar_amx3_in3_ep>; + }; + }; + + port@3 { + reg = <3>; + + amx3_in4_ep: endpoint { + remote-endpoint = <&xbar_amx3_in4_ep>; + }; + }; + + amx3_out_port: port@4 { + reg = <4>; + + amx3_out_ep: endpoint { + remote-endpoint = <&xbar_amx3_out_ep>; + }; + }; + }; + }; + + amx@2903300 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + amx4_in1_ep: endpoint { + remote-endpoint = <&xbar_amx4_in1_ep>; + }; + }; + + port@1 { + reg = <1>; + + amx4_in2_ep: endpoint { + remote-endpoint = <&xbar_amx4_in2_ep>; + }; + }; + + port@2 { + reg = <2>; + + amx4_in3_ep: endpoint { + remote-endpoint = <&xbar_amx4_in3_ep>; + }; + }; + + port@3 { + reg = <3>; + + amx4_in4_ep: endpoint { + remote-endpoint = <&xbar_amx4_in4_ep>; + }; + }; + + amx4_out_port: port@4 { + reg = <4>; + + amx4_out_ep: endpoint { + remote-endpoint = <&xbar_amx4_out_ep>; + }; + }; + }; + }; + + adx@2903800 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + adx1_in_ep: endpoint { + remote-endpoint = <&xbar_adx1_in_ep>; + }; + }; + + adx1_out1_port: port@1 { + reg = <1>; + + adx1_out1_ep: endpoint { + remote-endpoint = <&xbar_adx1_out1_ep>; + }; + }; + + adx1_out2_port: port@2 { + reg = <2>; + + adx1_out2_ep: endpoint { + remote-endpoint = <&xbar_adx1_out2_ep>; + }; + }; + + adx1_out3_port: port@3 { + reg = <3>; + + adx1_out3_ep: endpoint { + remote-endpoint = <&xbar_adx1_out3_ep>; + }; + }; + + adx1_out4_port: port@4 { + reg = <4>; + + adx1_out4_ep: endpoint { + remote-endpoint = <&xbar_adx1_out4_ep>; + }; + }; + }; + }; + + adx@2903900 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + adx2_in_ep: endpoint { + remote-endpoint = <&xbar_adx2_in_ep>; + }; + }; + + adx2_out1_port: port@1 { + reg = <1>; + + adx2_out1_ep: endpoint { + remote-endpoint = <&xbar_adx2_out1_ep>; + }; + }; + + adx2_out2_port: port@2 { + reg = <2>; + + adx2_out2_ep: endpoint { + remote-endpoint = <&xbar_adx2_out2_ep>; + }; + }; + + adx2_out3_port: port@3 { + reg = <3>; + + adx2_out3_ep: endpoint { + remote-endpoint = <&xbar_adx2_out3_ep>; + }; + }; + + adx2_out4_port: port@4 { + reg = <4>; + + adx2_out4_ep: endpoint { + remote-endpoint = <&xbar_adx2_out4_ep>; + }; + }; + }; + }; + + adx@2903a00 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + adx3_in_ep: endpoint { + remote-endpoint = <&xbar_adx3_in_ep>; + }; + }; + + adx3_out1_port: port@1 { + reg = <1>; + + adx3_out1_ep: endpoint { + remote-endpoint = <&xbar_adx3_out1_ep>; + }; + }; + + adx3_out2_port: port@2 { + reg = <2>; + + adx3_out2_ep: endpoint { + remote-endpoint = <&xbar_adx3_out2_ep>; + }; + }; + + adx3_out3_port: port@3 { + reg = <3>; + + adx3_out3_ep: endpoint { + remote-endpoint = <&xbar_adx3_out3_ep>; + }; + }; + + adx3_out4_port: port@4 { + reg = <4>; + + adx3_out4_ep: endpoint { + remote-endpoint = <&xbar_adx3_out4_ep>; + }; + }; + }; + }; + + adx@2903b00 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + adx4_in_ep: endpoint { + remote-endpoint = <&xbar_adx4_in_ep>; + }; + }; + + adx4_out1_port: port@1 { + reg = <1>; + + adx4_out1_ep: endpoint { + remote-endpoint = <&xbar_adx4_out1_ep>; + }; + }; + + adx4_out2_port: port@2 { + reg = <2>; + + adx4_out2_ep: endpoint { + remote-endpoint = <&xbar_adx4_out2_ep>; + }; + }; + + adx4_out3_port: port@3 { + reg = <3>; + + adx4_out3_ep: endpoint { + remote-endpoint = <&xbar_adx4_out3_ep>; + }; + }; + + adx4_out4_port: port@4 { + reg = <4>; + + adx4_out4_ep: endpoint { + remote-endpoint = <&xbar_adx4_out4_ep>; + }; + }; + }; + }; + + dmic@2904200 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dmic3_cif_ep: endpoint { + remote-endpoint = <&xbar_dmic3_ep>; + }; + }; + + dmic3_port: port@1 { + reg = <1>; + + dmic3_dap_ep: endpoint { + /* Place holder for external Codec */ + }; + }; + }; + }; + + processing-engine@2908000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + + ope1_cif_in_ep: endpoint { + remote-endpoint = <&xbar_ope1_in_ep>; + }; + }; + + ope1_out_port: port@1 { + reg = <0x1>; + + ope1_cif_out_ep: endpoint { + remote-endpoint = <&xbar_ope1_out_ep>; + }; + }; + }; + }; + + mvc@290a000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mvc1_cif_in_ep: endpoint { + remote-endpoint = <&xbar_mvc1_in_ep>; + }; + }; + + mvc1_out_port: port@1 { + reg = <1>; + + mvc1_cif_out_ep: endpoint { + remote-endpoint = <&xbar_mvc1_out_ep>; + }; + }; + }; + }; + + mvc@290a200 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mvc2_cif_in_ep: endpoint { + remote-endpoint = <&xbar_mvc2_in_ep>; + }; + }; + + mvc2_out_port: port@1 { + reg = <1>; + + mvc2_cif_out_ep: endpoint { + remote-endpoint = <&xbar_mvc2_out_ep>; + }; + }; + }; + }; + + amixer@290bb00 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + + mixer_in1_ep: endpoint { + remote-endpoint = <&xbar_mixer_in1_ep>; + }; + }; + + port@1 { + reg = <0x1>; + + mixer_in2_ep: endpoint { + remote-endpoint = <&xbar_mixer_in2_ep>; + }; + }; + + port@2 { + reg = <0x2>; + + mixer_in3_ep: endpoint { + remote-endpoint = <&xbar_mixer_in3_ep>; + }; + }; + + port@3 { + reg = <0x3>; + + mixer_in4_ep: endpoint { + remote-endpoint = <&xbar_mixer_in4_ep>; + }; + }; + + port@4 { + reg = <0x4>; + + mixer_in5_ep: endpoint { + remote-endpoint = <&xbar_mixer_in5_ep>; + }; + }; + + port@5 { + reg = <0x5>; + + mixer_in6_ep: endpoint { + remote-endpoint = <&xbar_mixer_in6_ep>; + }; + }; + + port@6 { + reg = <0x6>; + + mixer_in7_ep: endpoint { + remote-endpoint = <&xbar_mixer_in7_ep>; + }; + }; + + port@7 { + reg = <0x7>; + + mixer_in8_ep: endpoint { + remote-endpoint = <&xbar_mixer_in8_ep>; + }; + }; + + port@8 { + reg = <0x8>; + + mixer_in9_ep: endpoint { + remote-endpoint = <&xbar_mixer_in9_ep>; + }; + }; + + port@9 { + reg = <0x9>; + + mixer_in10_ep: endpoint { + remote-endpoint = <&xbar_mixer_in10_ep>; + }; + }; + + mixer_out1_port: port@a { + reg = <0xa>; + + mixer_out1_ep: endpoint { + remote-endpoint = <&xbar_mixer_out1_ep>; + }; + }; + + mixer_out2_port: port@b { + reg = <0xb>; + + mixer_out2_ep: endpoint { + remote-endpoint = <&xbar_mixer_out2_ep>; + }; + }; + + mixer_out3_port: port@c { + reg = <0xc>; + + mixer_out3_ep: endpoint { + remote-endpoint = <&xbar_mixer_out3_ep>; + }; + }; + + mixer_out4_port: port@d { + reg = <0xd>; + + mixer_out4_ep: endpoint { + remote-endpoint = <&xbar_mixer_out4_ep>; + }; + }; + + mixer_out5_port: port@e { + reg = <0xe>; + + mixer_out5_ep: endpoint { + remote-endpoint = <&xbar_mixer_out5_ep>; + }; + }; + }; + }; + + admaif@290f000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + admaif0_port: port@0 { + reg = <0x0>; + + admaif0_ep: endpoint { + remote-endpoint = <&xbar_admaif0_ep>; + }; + }; + + admaif1_port: port@1 { + reg = <0x1>; + + admaif1_ep: endpoint { + remote-endpoint = <&xbar_admaif1_ep>; + }; + }; + + admaif2_port: port@2 { + reg = <0x2>; + + admaif2_ep: endpoint { + remote-endpoint = <&xbar_admaif2_ep>; + }; + }; + + admaif3_port: port@3 { + reg = <0x3>; + + admaif3_ep: endpoint { + remote-endpoint = <&xbar_admaif3_ep>; + }; + }; + + admaif4_port: port@4 { + reg = <0x4>; + + admaif4_ep: endpoint { + remote-endpoint = <&xbar_admaif4_ep>; + }; + }; + + admaif5_port: port@5 { + reg = <0x5>; + + admaif5_ep: endpoint { + remote-endpoint = <&xbar_admaif5_ep>; + }; + }; + + admaif6_port: port@6 { + reg = <0x6>; + + admaif6_ep: endpoint { + remote-endpoint = <&xbar_admaif6_ep>; + }; + }; + + admaif7_port: port@7 { + reg = <0x7>; + + admaif7_ep: endpoint { + remote-endpoint = <&xbar_admaif7_ep>; + }; + }; + + admaif8_port: port@8 { + reg = <0x8>; + + admaif8_ep: endpoint { + remote-endpoint = <&xbar_admaif8_ep>; + }; + }; + + admaif9_port: port@9 { + reg = <0x9>; + + admaif9_ep: endpoint { + remote-endpoint = <&xbar_admaif9_ep>; + }; + }; + + admaif10_port: port@a { + reg = <0xa>; + + admaif10_ep: endpoint { + remote-endpoint = <&xbar_admaif10_ep>; + }; + }; + + admaif11_port: port@b { + reg = <0xb>; + + admaif11_ep: endpoint { + remote-endpoint = <&xbar_admaif11_ep>; + }; + }; + + admaif12_port: port@c { + reg = <0xc>; + + admaif12_ep: endpoint { + remote-endpoint = <&xbar_admaif12_ep>; + }; + }; + + admaif13_port: port@d { + reg = <0xd>; + + admaif13_ep: endpoint { + remote-endpoint = <&xbar_admaif13_ep>; + }; + }; + + admaif14_port: port@e { + reg = <0xe>; + + admaif14_ep: endpoint { + remote-endpoint = <&xbar_admaif14_ep>; + }; + }; + + admaif15_port: port@f { + reg = <0xf>; + + admaif15_ep: endpoint { + remote-endpoint = <&xbar_admaif15_ep>; + }; + }; + + admaif16_port: port@10 { + reg = <0x10>; + + admaif16_ep: endpoint { + remote-endpoint = <&xbar_admaif16_ep>; + }; + }; + + admaif17_port: port@11 { + reg = <0x11>; + + admaif17_ep: endpoint { + remote-endpoint = <&xbar_admaif17_ep>; + }; + }; + + admaif18_port: port@12 { + reg = <0x12>; + + admaif18_ep: endpoint { + remote-endpoint = <&xbar_admaif18_ep>; + }; + }; + + admaif19_port: port@13 { + reg = <0x13>; + + admaif19_ep: endpoint { + remote-endpoint = <&xbar_admaif19_ep>; + }; + }; + }; + }; + + asrc@2910000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + + asrc_in1_ep: endpoint { + remote-endpoint = <&xbar_asrc_in1_ep>; + }; + }; + + port@1 { + reg = <0x1>; + + asrc_in2_ep: endpoint { + remote-endpoint = <&xbar_asrc_in2_ep>; + }; + }; + + port@2 { + reg = <0x2>; + + asrc_in3_ep: endpoint { + remote-endpoint = <&xbar_asrc_in3_ep>; + }; + }; + + port@3 { + reg = <0x3>; + + asrc_in4_ep: endpoint { + remote-endpoint = <&xbar_asrc_in4_ep>; + }; + }; + + port@4 { + reg = <0x4>; + + asrc_in5_ep: endpoint { + remote-endpoint = <&xbar_asrc_in5_ep>; + }; + }; + + port@5 { + reg = <0x5>; + + asrc_in6_ep: endpoint { + remote-endpoint = <&xbar_asrc_in6_ep>; + }; + }; + + port@6 { + reg = <0x6>; + + asrc_in7_ep: endpoint { + remote-endpoint = <&xbar_asrc_in7_ep>; + }; + }; + + asrc_out1_port: port@7 { + reg = <0x7>; + + asrc_out1_ep: endpoint { + remote-endpoint = <&xbar_asrc_out1_ep>; + }; + }; + + asrc_out2_port: port@8 { + reg = <0x8>; + + asrc_out2_ep: endpoint { + remote-endpoint = <&xbar_asrc_out2_ep>; + }; + }; + + asrc_out3_port: port@9 { + reg = <0x9>; + + asrc_out3_ep: endpoint { + remote-endpoint = <&xbar_asrc_out3_ep>; + }; + }; + + asrc_out4_port: port@a { + reg = <0xa>; + + asrc_out4_ep: endpoint { + remote-endpoint = <&xbar_asrc_out4_ep>; + }; + }; + + asrc_out5_port: port@b { + reg = <0xb>; + + asrc_out5_ep: endpoint { + remote-endpoint = <&xbar_asrc_out5_ep>; + }; + }; + + asrc_out6_port: port@c { + reg = <0xc>; + + asrc_out6_ep: endpoint { + remote-endpoint = <&xbar_asrc_out6_ep>; + }; + }; + }; + }; ports { #address-cells = <1>; @@ -885,1113 +1984,14 @@ }; }; }; + }; - admaif@290f000 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - admaif0_port: port@0 { - reg = <0x0>; - - admaif0_ep: endpoint { - remote-endpoint = <&xbar_admaif0_ep>; - }; - }; - - admaif1_port: port@1 { - reg = <0x1>; - - admaif1_ep: endpoint { - remote-endpoint = <&xbar_admaif1_ep>; - }; - }; - - admaif2_port: port@2 { - reg = <0x2>; - - admaif2_ep: endpoint { - remote-endpoint = <&xbar_admaif2_ep>; - }; - }; - - admaif3_port: port@3 { - reg = <0x3>; - - admaif3_ep: endpoint { - remote-endpoint = <&xbar_admaif3_ep>; - }; - }; - - admaif4_port: port@4 { - reg = <0x4>; - - admaif4_ep: endpoint { - remote-endpoint = <&xbar_admaif4_ep>; - }; - }; - - admaif5_port: port@5 { - reg = <0x5>; - - admaif5_ep: endpoint { - remote-endpoint = <&xbar_admaif5_ep>; - }; - }; - - admaif6_port: port@6 { - reg = <0x6>; - - admaif6_ep: endpoint { - remote-endpoint = <&xbar_admaif6_ep>; - }; - }; - - admaif7_port: port@7 { - reg = <0x7>; - - admaif7_ep: endpoint { - remote-endpoint = <&xbar_admaif7_ep>; - }; - }; - - admaif8_port: port@8 { - reg = <0x8>; - - admaif8_ep: endpoint { - remote-endpoint = <&xbar_admaif8_ep>; - }; - }; - - admaif9_port: port@9 { - reg = <0x9>; - - admaif9_ep: endpoint { - remote-endpoint = <&xbar_admaif9_ep>; - }; - }; - - admaif10_port: port@a { - reg = <0xa>; - - admaif10_ep: endpoint { - remote-endpoint = <&xbar_admaif10_ep>; - }; - }; - - admaif11_port: port@b { - reg = <0xb>; - - admaif11_ep: endpoint { - remote-endpoint = <&xbar_admaif11_ep>; - }; - }; - - admaif12_port: port@c { - reg = <0xc>; - - admaif12_ep: endpoint { - remote-endpoint = <&xbar_admaif12_ep>; - }; - }; - - admaif13_port: port@d { - reg = <0xd>; - - admaif13_ep: endpoint { - remote-endpoint = <&xbar_admaif13_ep>; - }; - }; - - admaif14_port: port@e { - reg = <0xe>; - - admaif14_ep: endpoint { - remote-endpoint = <&xbar_admaif14_ep>; - }; - }; - - admaif15_port: port@f { - reg = <0xf>; - - admaif15_ep: endpoint { - remote-endpoint = <&xbar_admaif15_ep>; - }; - }; - - admaif16_port: port@10 { - reg = <0x10>; - - admaif16_ep: endpoint { - remote-endpoint = <&xbar_admaif16_ep>; - }; - }; - - admaif17_port: port@11 { - reg = <0x11>; - - admaif17_ep: endpoint { - remote-endpoint = <&xbar_admaif17_ep>; - }; - }; - - admaif18_port: port@12 { - reg = <0x12>; - - admaif18_ep: endpoint { - remote-endpoint = <&xbar_admaif18_ep>; - }; - }; - - admaif19_port: port@13 { - reg = <0x13>; - - admaif19_ep: endpoint { - remote-endpoint = <&xbar_admaif19_ep>; - }; - }; - }; - }; - - i2s@2901000 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - i2s1_cif_ep: endpoint { - remote-endpoint = <&xbar_i2s1_ep>; - }; - }; - - i2s1_port: port@1 { - reg = <1>; - - i2s1_dap_ep: endpoint { - dai-format = "i2s"; - remote-endpoint = <&rt5658_ep>; - }; - }; - }; - }; - - i2s@2901100 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - i2s2_cif_ep: endpoint { - remote-endpoint = <&xbar_i2s2_ep>; - }; - }; - - i2s2_port: port@1 { - reg = <1>; - - i2s2_dap_ep: endpoint { - dai-format = "i2s"; - /* Place holder for external Codec */ - }; - }; - }; - }; - - i2s@2901300 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - i2s4_cif_ep: endpoint { - remote-endpoint = <&xbar_i2s4_ep>; - }; - }; - - i2s4_port: port@1 { - reg = <1>; - - i2s4_dap_ep: endpoint { - dai-format = "i2s"; - /* Place holder for external Codec */ - }; - }; - }; - }; - - i2s@2901500 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - i2s6_cif_ep: endpoint { - remote-endpoint = <&xbar_i2s6_ep>; - }; - }; - - i2s6_port: port@1 { - reg = <1>; - - i2s6_dap_ep: endpoint { - dai-format = "i2s"; - /* Place holder for external Codec */ - }; - }; - }; - }; - - dmic@2904200 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - dmic3_cif_ep: endpoint { - remote-endpoint = <&xbar_dmic3_ep>; - }; - }; - - dmic3_port: port@1 { - reg = <1>; - - dmic3_dap_ep: endpoint { - /* Place holder for external Codec */ - }; - }; - }; - }; - - sfc@2902000 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - sfc1_cif_in_ep: endpoint { - remote-endpoint = <&xbar_sfc1_in_ep>; - }; - }; - - sfc1_out_port: port@1 { - reg = <1>; - - sfc1_cif_out_ep: endpoint { - remote-endpoint = <&xbar_sfc1_out_ep>; - }; - }; - }; - }; - - sfc@2902200 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - sfc2_cif_in_ep: endpoint { - remote-endpoint = <&xbar_sfc2_in_ep>; - }; - }; - - sfc2_out_port: port@1 { - reg = <1>; - - sfc2_cif_out_ep: endpoint { - remote-endpoint = <&xbar_sfc2_out_ep>; - }; - }; - }; - }; - - sfc@2902400 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - sfc3_cif_in_ep: endpoint { - remote-endpoint = <&xbar_sfc3_in_ep>; - }; - }; - - sfc3_out_port: port@1 { - reg = <1>; - - sfc3_cif_out_ep: endpoint { - remote-endpoint = <&xbar_sfc3_out_ep>; - }; - }; - }; - }; - - sfc@2902600 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - sfc4_cif_in_ep: endpoint { - remote-endpoint = <&xbar_sfc4_in_ep>; - }; - }; - - sfc4_out_port: port@1 { - reg = <1>; - - sfc4_cif_out_ep: endpoint { - remote-endpoint = <&xbar_sfc4_out_ep>; - }; - }; - }; - }; - - mvc@290a000 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - mvc1_cif_in_ep: endpoint { - remote-endpoint = <&xbar_mvc1_in_ep>; - }; - }; - - mvc1_out_port: port@1 { - reg = <1>; - - mvc1_cif_out_ep: endpoint { - remote-endpoint = <&xbar_mvc1_out_ep>; - }; - }; - }; - }; - - mvc@290a200 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - mvc2_cif_in_ep: endpoint { - remote-endpoint = <&xbar_mvc2_in_ep>; - }; - }; - - mvc2_out_port: port@1 { - reg = <1>; - - mvc2_cif_out_ep: endpoint { - remote-endpoint = <&xbar_mvc2_out_ep>; - }; - }; - }; - }; - - amx@2903000 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - amx1_in1_ep: endpoint { - remote-endpoint = <&xbar_amx1_in1_ep>; - }; - }; - - port@1 { - reg = <1>; - - amx1_in2_ep: endpoint { - remote-endpoint = <&xbar_amx1_in2_ep>; - }; - }; - - port@2 { - reg = <2>; - - amx1_in3_ep: endpoint { - remote-endpoint = <&xbar_amx1_in3_ep>; - }; - }; - - port@3 { - reg = <3>; - - amx1_in4_ep: endpoint { - remote-endpoint = <&xbar_amx1_in4_ep>; - }; - }; - - amx1_out_port: port@4 { - reg = <4>; - - amx1_out_ep: endpoint { - remote-endpoint = <&xbar_amx1_out_ep>; - }; - }; - }; - }; - - amx@2903100 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - amx2_in1_ep: endpoint { - remote-endpoint = <&xbar_amx2_in1_ep>; - }; - }; - - port@1 { - reg = <1>; - - amx2_in2_ep: endpoint { - remote-endpoint = <&xbar_amx2_in2_ep>; - }; - }; - - amx2_in3_port: port@2 { - reg = <2>; - - amx2_in3_ep: endpoint { - remote-endpoint = <&xbar_amx2_in3_ep>; - }; - }; - - amx2_in4_port: port@3 { - reg = <3>; - - amx2_in4_ep: endpoint { - remote-endpoint = <&xbar_amx2_in4_ep>; - }; - }; - - amx2_out_port: port@4 { - reg = <4>; - - amx2_out_ep: endpoint { - remote-endpoint = <&xbar_amx2_out_ep>; - }; - }; - }; - }; - - amx@2903200 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - amx3_in1_ep: endpoint { - remote-endpoint = <&xbar_amx3_in1_ep>; - }; - }; - - port@1 { - reg = <1>; - - amx3_in2_ep: endpoint { - remote-endpoint = <&xbar_amx3_in2_ep>; - }; - }; - - port@2 { - reg = <2>; - - amx3_in3_ep: endpoint { - remote-endpoint = <&xbar_amx3_in3_ep>; - }; - }; - - port@3 { - reg = <3>; - - amx3_in4_ep: endpoint { - remote-endpoint = <&xbar_amx3_in4_ep>; - }; - }; - - amx3_out_port: port@4 { - reg = <4>; - - amx3_out_ep: endpoint { - remote-endpoint = <&xbar_amx3_out_ep>; - }; - }; - }; - }; - - amx@2903300 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - amx4_in1_ep: endpoint { - remote-endpoint = <&xbar_amx4_in1_ep>; - }; - }; - - port@1 { - reg = <1>; - - amx4_in2_ep: endpoint { - remote-endpoint = <&xbar_amx4_in2_ep>; - }; - }; - - port@2 { - reg = <2>; - - amx4_in3_ep: endpoint { - remote-endpoint = <&xbar_amx4_in3_ep>; - }; - }; - - port@3 { - reg = <3>; - - amx4_in4_ep: endpoint { - remote-endpoint = <&xbar_amx4_in4_ep>; - }; - }; - - amx4_out_port: port@4 { - reg = <4>; - - amx4_out_ep: endpoint { - remote-endpoint = <&xbar_amx4_out_ep>; - }; - }; - }; - }; - - adx@2903800 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - adx1_in_ep: endpoint { - remote-endpoint = <&xbar_adx1_in_ep>; - }; - }; - - adx1_out1_port: port@1 { - reg = <1>; - - adx1_out1_ep: endpoint { - remote-endpoint = <&xbar_adx1_out1_ep>; - }; - }; - - adx1_out2_port: port@2 { - reg = <2>; - - adx1_out2_ep: endpoint { - remote-endpoint = <&xbar_adx1_out2_ep>; - }; - }; - - adx1_out3_port: port@3 { - reg = <3>; - - adx1_out3_ep: endpoint { - remote-endpoint = <&xbar_adx1_out3_ep>; - }; - }; - - adx1_out4_port: port@4 { - reg = <4>; - - adx1_out4_ep: endpoint { - remote-endpoint = <&xbar_adx1_out4_ep>; - }; - }; - }; - }; - - adx@2903900 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - adx2_in_ep: endpoint { - remote-endpoint = <&xbar_adx2_in_ep>; - }; - }; - - adx2_out1_port: port@1 { - reg = <1>; - - adx2_out1_ep: endpoint { - remote-endpoint = <&xbar_adx2_out1_ep>; - }; - }; - - adx2_out2_port: port@2 { - reg = <2>; - - adx2_out2_ep: endpoint { - remote-endpoint = <&xbar_adx2_out2_ep>; - }; - }; - - adx2_out3_port: port@3 { - reg = <3>; - - adx2_out3_ep: endpoint { - remote-endpoint = <&xbar_adx2_out3_ep>; - }; - }; - - adx2_out4_port: port@4 { - reg = <4>; - - adx2_out4_ep: endpoint { - remote-endpoint = <&xbar_adx2_out4_ep>; - }; - }; - }; - }; - - adx@2903a00 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - adx3_in_ep: endpoint { - remote-endpoint = <&xbar_adx3_in_ep>; - }; - }; - - adx3_out1_port: port@1 { - reg = <1>; - - adx3_out1_ep: endpoint { - remote-endpoint = <&xbar_adx3_out1_ep>; - }; - }; - - adx3_out2_port: port@2 { - reg = <2>; - - adx3_out2_ep: endpoint { - remote-endpoint = <&xbar_adx3_out2_ep>; - }; - }; - - adx3_out3_port: port@3 { - reg = <3>; - - adx3_out3_ep: endpoint { - remote-endpoint = <&xbar_adx3_out3_ep>; - }; - }; - - adx3_out4_port: port@4 { - reg = <4>; - - adx3_out4_ep: endpoint { - remote-endpoint = <&xbar_adx3_out4_ep>; - }; - }; - }; - }; - - adx@2903b00 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - adx4_in_ep: endpoint { - remote-endpoint = <&xbar_adx4_in_ep>; - }; - }; - - adx4_out1_port: port@1 { - reg = <1>; - - adx4_out1_ep: endpoint { - remote-endpoint = <&xbar_adx4_out1_ep>; - }; - }; - - adx4_out2_port: port@2 { - reg = <2>; - - adx4_out2_ep: endpoint { - remote-endpoint = <&xbar_adx4_out2_ep>; - }; - }; - - adx4_out3_port: port@3 { - reg = <3>; - - adx4_out3_ep: endpoint { - remote-endpoint = <&xbar_adx4_out3_ep>; - }; - }; - - adx4_out4_port: port@4 { - reg = <4>; - - adx4_out4_ep: endpoint { - remote-endpoint = <&xbar_adx4_out4_ep>; - }; - }; - }; - }; - - processing-engine@2908000 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0x0>; - - ope1_cif_in_ep: endpoint { - remote-endpoint = <&xbar_ope1_in_ep>; - }; - }; - - ope1_out_port: port@1 { - reg = <0x1>; - - ope1_cif_out_ep: endpoint { - remote-endpoint = <&xbar_ope1_out_ep>; - }; - }; - }; - }; - - amixer@290bb00 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0x0>; - - mixer_in1_ep: endpoint { - remote-endpoint = <&xbar_mixer_in1_ep>; - }; - }; - - port@1 { - reg = <0x1>; - - mixer_in2_ep: endpoint { - remote-endpoint = <&xbar_mixer_in2_ep>; - }; - }; - - port@2 { - reg = <0x2>; - - mixer_in3_ep: endpoint { - remote-endpoint = <&xbar_mixer_in3_ep>; - }; - }; - - port@3 { - reg = <0x3>; - - mixer_in4_ep: endpoint { - remote-endpoint = <&xbar_mixer_in4_ep>; - }; - }; - - port@4 { - reg = <0x4>; - - mixer_in5_ep: endpoint { - remote-endpoint = <&xbar_mixer_in5_ep>; - }; - }; - - port@5 { - reg = <0x5>; - - mixer_in6_ep: endpoint { - remote-endpoint = <&xbar_mixer_in6_ep>; - }; - }; - - port@6 { - reg = <0x6>; - - mixer_in7_ep: endpoint { - remote-endpoint = <&xbar_mixer_in7_ep>; - }; - }; - - port@7 { - reg = <0x7>; - - mixer_in8_ep: endpoint { - remote-endpoint = <&xbar_mixer_in8_ep>; - }; - }; - - port@8 { - reg = <0x8>; - - mixer_in9_ep: endpoint { - remote-endpoint = <&xbar_mixer_in9_ep>; - }; - }; - - port@9 { - reg = <0x9>; - - mixer_in10_ep: endpoint { - remote-endpoint = <&xbar_mixer_in10_ep>; - }; - }; - - mixer_out1_port: port@a { - reg = <0xa>; - - mixer_out1_ep: endpoint { - remote-endpoint = <&xbar_mixer_out1_ep>; - }; - }; - - mixer_out2_port: port@b { - reg = <0xb>; - - mixer_out2_ep: endpoint { - remote-endpoint = <&xbar_mixer_out2_ep>; - }; - }; - - mixer_out3_port: port@c { - reg = <0xc>; - - mixer_out3_ep: endpoint { - remote-endpoint = <&xbar_mixer_out3_ep>; - }; - }; - - mixer_out4_port: port@d { - reg = <0xd>; - - mixer_out4_ep: endpoint { - remote-endpoint = <&xbar_mixer_out4_ep>; - }; - }; - - mixer_out5_port: port@e { - reg = <0xe>; - - mixer_out5_ep: endpoint { - remote-endpoint = <&xbar_mixer_out5_ep>; - }; - }; - }; - }; - - asrc@2910000 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0x0>; - - asrc_in1_ep: endpoint { - remote-endpoint = <&xbar_asrc_in1_ep>; - }; - }; - - port@1 { - reg = <0x1>; - - asrc_in2_ep: endpoint { - remote-endpoint = <&xbar_asrc_in2_ep>; - }; - }; - - port@2 { - reg = <0x2>; - - asrc_in3_ep: endpoint { - remote-endpoint = <&xbar_asrc_in3_ep>; - }; - }; - - port@3 { - reg = <0x3>; - - asrc_in4_ep: endpoint { - remote-endpoint = <&xbar_asrc_in4_ep>; - }; - }; - - port@4 { - reg = <0x4>; - - asrc_in5_ep: endpoint { - remote-endpoint = <&xbar_asrc_in5_ep>; - }; - }; - - port@5 { - reg = <0x5>; - - asrc_in6_ep: endpoint { - remote-endpoint = <&xbar_asrc_in6_ep>; - }; - }; - - port@6 { - reg = <0x6>; - - asrc_in7_ep: endpoint { - remote-endpoint = <&xbar_asrc_in7_ep>; - }; - }; - - asrc_out1_port: port@7 { - reg = <0x7>; - - asrc_out1_ep: endpoint { - remote-endpoint = <&xbar_asrc_out1_ep>; - }; - }; - - asrc_out2_port: port@8 { - reg = <0x8>; - - asrc_out2_ep: endpoint { - remote-endpoint = <&xbar_asrc_out2_ep>; - }; - }; - - asrc_out3_port: port@9 { - reg = <0x9>; - - asrc_out3_ep: endpoint { - remote-endpoint = <&xbar_asrc_out3_ep>; - }; - }; - - asrc_out4_port: port@a { - reg = <0xa>; - - asrc_out4_ep: endpoint { - remote-endpoint = <&xbar_asrc_out4_ep>; - }; - }; - - asrc_out5_port: port@b { - reg = <0xb>; - - asrc_out5_ep: endpoint { - remote-endpoint = <&xbar_asrc_out5_ep>; - }; - }; - - asrc_out6_port: port@c { - reg = <0xc>; + dma-controller@2930000 { + status = "okay"; + }; - asrc_out6_ep: endpoint { - remote-endpoint = <&xbar_asrc_out6_ep>; - }; - }; - }; - }; + interrupt-controller@2a40000 { + status = "okay"; }; }; @@ -2184,75 +2184,67 @@ GPIO_ACTIVE_LOW>; }; }; - }; - pcie@14100000 { - status = "okay"; + pcie@14100000 { + status = "okay"; - vddio-pex-ctl-supply = <&vdd_1v8ao>; + vddio-pex-ctl-supply = <&vdd_1v8ao>; - phys = <&p2u_hsio_0>; - phy-names = "p2u-0"; - }; - - pcie@14140000 { - status = "okay"; + phys = <&p2u_hsio_0>; + phy-names = "p2u-0"; + }; - vddio-pex-ctl-supply = <&vdd_1v8ao>; + pcie@14140000 { + status = "okay"; - phys = <&p2u_hsio_7>; - phy-names = "p2u-0"; - }; + vddio-pex-ctl-supply = <&vdd_1v8ao>; - pcie@14180000 { - status = "okay"; + phys = <&p2u_hsio_7>; + phy-names = "p2u-0"; + }; - vddio-pex-ctl-supply = <&vdd_1v8ao>; + pcie@14180000 { + status = "okay"; - phys = <&p2u_hsio_2>, <&p2u_hsio_3>, <&p2u_hsio_4>, - <&p2u_hsio_5>; - phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3"; - }; + vddio-pex-ctl-supply = <&vdd_1v8ao>; - pcie@141a0000 { - status = "okay"; + phys = <&p2u_hsio_2>, <&p2u_hsio_3>, <&p2u_hsio_4>, + <&p2u_hsio_5>; + phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3"; + }; - vddio-pex-ctl-supply = <&vdd_1v8ao>; - vpcie3v3-supply = <&vdd_3v3_pcie>; - vpcie12v-supply = <&vdd_12v_pcie>; + pcie@141a0000 { + status = "okay"; - phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>, - <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>, - <&p2u_nvhs_6>, <&p2u_nvhs_7>; + vddio-pex-ctl-supply = <&vdd_1v8ao>; + vpcie3v3-supply = <&vdd_3v3_pcie>; + vpcie12v-supply = <&vdd_12v_pcie>; - phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4", - "p2u-5", "p2u-6", "p2u-7"; - }; + phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>, + <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>, + <&p2u_nvhs_6>, <&p2u_nvhs_7>; - pcie-ep@141a0000 { - status = "disabled"; + phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4", + "p2u-5", "p2u-6", "p2u-7"; + }; - vddio-pex-ctl-supply = <&vdd_1v8ao>; + pcie-ep@141a0000 { + status = "disabled"; - reset-gpios = <&gpio TEGRA194_MAIN_GPIO(GG, 1) GPIO_ACTIVE_LOW>; + vddio-pex-ctl-supply = <&vdd_1v8ao>; - nvidia,refclk-select-gpios = <&gpio_aon TEGRA194_AON_GPIO(AA, 5) - GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio TEGRA194_MAIN_GPIO(GG, 1) GPIO_ACTIVE_LOW>; - phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>, - <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>, - <&p2u_nvhs_6>, <&p2u_nvhs_7>; + nvidia,refclk-select-gpios = <&gpio_aon TEGRA194_AON_GPIO(AA, 5) + GPIO_ACTIVE_HIGH>; - phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4", - "p2u-5", "p2u-6", "p2u-7"; - }; + phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>, + <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>, + <&p2u_nvhs_6>, <&p2u_nvhs_7>; - fan: pwm-fan { - compatible = "pwm-fan"; - pwms = <&pwm4 0 45334>; - - cooling-levels = <0 64 128 255>; - #cooling-cells = <2>; + phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4", + "p2u-5", "p2u-6", "p2u-7"; + }; }; gpio-keys { @@ -2279,6 +2271,14 @@ }; }; + fan: pwm-fan { + compatible = "pwm-fan"; + pwms = <&pwm4 0 45334>; + + cooling-levels = <0 64 128 255>; + #cooling-cells = <2>; + }; + sound { compatible = "nvidia,tegra186-audio-graph-card"; status = "okay"; diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi index f212f6aced04..4a17ea5e40fd 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi @@ -1,5 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 +#include <dt-bindings/gpio/tegra194-gpio.h> #include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/input/gpio-keys.h> @@ -8,16 +9,1165 @@ aconnect@2900000 { status = "okay"; - dma-controller@2930000 { + ahub@2900800 { status = "okay"; - }; - interrupt-controller@2a40000 { - status = "okay"; - }; + i2s@2901200 { + status = "okay"; - ahub@2900800 { - status = "okay"; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s3_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s3_ep>; + }; + }; + + i2s3_port: port@1 { + reg = <1>; + + i2s3_dap_ep: endpoint { + dai-format = "i2s"; + /* Place holder for external Codec */ + }; + }; + }; + }; + + i2s@2901400 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s5_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s5_ep>; + }; + }; + + i2s5_port: port@1 { + reg = <1>; + + i2s5_dap_ep: endpoint { + dai-format = "i2s"; + /* Place holder for external Codec */ + }; + }; + }; + }; + + sfc@2902000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sfc1_cif_in_ep: endpoint { + remote-endpoint = <&xbar_sfc1_in_ep>; + convert-rate = <44100>; + }; + }; + + sfc1_out_port: port@1 { + reg = <1>; + + sfc1_cif_out_ep: endpoint { + remote-endpoint = <&xbar_sfc1_out_ep>; + convert-rate = <48000>; + }; + }; + }; + }; + + sfc@2902200 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sfc2_cif_in_ep: endpoint { + remote-endpoint = <&xbar_sfc2_in_ep>; + }; + }; + + sfc2_out_port: port@1 { + reg = <1>; + + sfc2_cif_out_ep: endpoint { + remote-endpoint = <&xbar_sfc2_out_ep>; + }; + }; + }; + }; + + sfc@2902400 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sfc3_cif_in_ep: endpoint { + remote-endpoint = <&xbar_sfc3_in_ep>; + }; + }; + + sfc3_out_port: port@1 { + reg = <1>; + + sfc3_cif_out_ep: endpoint { + remote-endpoint = <&xbar_sfc3_out_ep>; + }; + }; + }; + }; + + sfc@2902600 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sfc4_cif_in_ep: endpoint { + remote-endpoint = <&xbar_sfc4_in_ep>; + }; + }; + + sfc4_out_port: port@1 { + reg = <1>; + + sfc4_cif_out_ep: endpoint { + remote-endpoint = <&xbar_sfc4_out_ep>; + }; + }; + }; + }; + + amx@2903000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + amx1_in1_ep: endpoint { + remote-endpoint = <&xbar_amx1_in1_ep>; + }; + }; + + port@1 { + reg = <1>; + + amx1_in2_ep: endpoint { + remote-endpoint = <&xbar_amx1_in2_ep>; + }; + }; + + port@2 { + reg = <2>; + + amx1_in3_ep: endpoint { + remote-endpoint = <&xbar_amx1_in3_ep>; + }; + }; + + port@3 { + reg = <3>; + + amx1_in4_ep: endpoint { + remote-endpoint = <&xbar_amx1_in4_ep>; + }; + }; + + amx1_out_port: port@4 { + reg = <4>; + + amx1_out_ep: endpoint { + remote-endpoint = <&xbar_amx1_out_ep>; + }; + }; + }; + }; + + amx@2903100 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + amx2_in1_ep: endpoint { + remote-endpoint = <&xbar_amx2_in1_ep>; + }; + }; + + port@1 { + reg = <1>; + + amx2_in2_ep: endpoint { + remote-endpoint = <&xbar_amx2_in2_ep>; + }; + }; + + amx2_in3_port: port@2 { + reg = <2>; + + amx2_in3_ep: endpoint { + remote-endpoint = <&xbar_amx2_in3_ep>; + }; + }; + + amx2_in4_port: port@3 { + reg = <3>; + + amx2_in4_ep: endpoint { + remote-endpoint = <&xbar_amx2_in4_ep>; + }; + }; + + amx2_out_port: port@4 { + reg = <4>; + + amx2_out_ep: endpoint { + remote-endpoint = <&xbar_amx2_out_ep>; + }; + }; + }; + }; + + amx@2903200 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + amx3_in1_ep: endpoint { + remote-endpoint = <&xbar_amx3_in1_ep>; + }; + }; + + port@1 { + reg = <1>; + + amx3_in2_ep: endpoint { + remote-endpoint = <&xbar_amx3_in2_ep>; + }; + }; + + port@2 { + reg = <2>; + + amx3_in3_ep: endpoint { + remote-endpoint = <&xbar_amx3_in3_ep>; + }; + }; + + port@3 { + reg = <3>; + + amx3_in4_ep: endpoint { + remote-endpoint = <&xbar_amx3_in4_ep>; + }; + }; + + amx3_out_port: port@4 { + reg = <4>; + + amx3_out_ep: endpoint { + remote-endpoint = <&xbar_amx3_out_ep>; + }; + }; + }; + }; + + amx@2903300 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + amx4_in1_ep: endpoint { + remote-endpoint = <&xbar_amx4_in1_ep>; + }; + }; + + port@1 { + reg = <1>; + + amx4_in2_ep: endpoint { + remote-endpoint = <&xbar_amx4_in2_ep>; + }; + }; + + port@2 { + reg = <2>; + + amx4_in3_ep: endpoint { + remote-endpoint = <&xbar_amx4_in3_ep>; + }; + }; + + port@3 { + reg = <3>; + + amx4_in4_ep: endpoint { + remote-endpoint = <&xbar_amx4_in4_ep>; + }; + }; + + amx4_out_port: port@4 { + reg = <4>; + + amx4_out_ep: endpoint { + remote-endpoint = <&xbar_amx4_out_ep>; + }; + }; + }; + }; + + adx@2903800 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + adx1_in_ep: endpoint { + remote-endpoint = <&xbar_adx1_in_ep>; + }; + }; + + adx1_out1_port: port@1 { + reg = <1>; + + adx1_out1_ep: endpoint { + remote-endpoint = <&xbar_adx1_out1_ep>; + }; + }; + + adx1_out2_port: port@2 { + reg = <2>; + + adx1_out2_ep: endpoint { + remote-endpoint = <&xbar_adx1_out2_ep>; + }; + }; + + adx1_out3_port: port@3 { + reg = <3>; + + adx1_out3_ep: endpoint { + remote-endpoint = <&xbar_adx1_out3_ep>; + }; + }; + + adx1_out4_port: port@4 { + reg = <4>; + + adx1_out4_ep: endpoint { + remote-endpoint = <&xbar_adx1_out4_ep>; + }; + }; + }; + }; + + adx@2903900 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + adx2_in_ep: endpoint { + remote-endpoint = <&xbar_adx2_in_ep>; + }; + }; + + adx2_out1_port: port@1 { + reg = <1>; + + adx2_out1_ep: endpoint { + remote-endpoint = <&xbar_adx2_out1_ep>; + }; + }; + + adx2_out2_port: port@2 { + reg = <2>; + + adx2_out2_ep: endpoint { + remote-endpoint = <&xbar_adx2_out2_ep>; + }; + }; + + adx2_out3_port: port@3 { + reg = <3>; + + adx2_out3_ep: endpoint { + remote-endpoint = <&xbar_adx2_out3_ep>; + }; + }; + + adx2_out4_port: port@4 { + reg = <4>; + + adx2_out4_ep: endpoint { + remote-endpoint = <&xbar_adx2_out4_ep>; + }; + }; + }; + }; + + adx@2903a00 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + adx3_in_ep: endpoint { + remote-endpoint = <&xbar_adx3_in_ep>; + }; + }; + + adx3_out1_port: port@1 { + reg = <1>; + + adx3_out1_ep: endpoint { + remote-endpoint = <&xbar_adx3_out1_ep>; + }; + }; + + adx3_out2_port: port@2 { + reg = <2>; + + adx3_out2_ep: endpoint { + remote-endpoint = <&xbar_adx3_out2_ep>; + }; + }; + + adx3_out3_port: port@3 { + reg = <3>; + + adx3_out3_ep: endpoint { + remote-endpoint = <&xbar_adx3_out3_ep>; + }; + }; + + adx3_out4_port: port@4 { + reg = <4>; + + adx3_out4_ep: endpoint { + remote-endpoint = <&xbar_adx3_out4_ep>; + }; + }; + }; + }; + + adx@2903b00 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + adx4_in_ep: endpoint { + remote-endpoint = <&xbar_adx4_in_ep>; + }; + }; + + adx4_out1_port: port@1 { + reg = <1>; + + adx4_out1_ep: endpoint { + remote-endpoint = <&xbar_adx4_out1_ep>; + }; + }; + + adx4_out2_port: port@2 { + reg = <2>; + + adx4_out2_ep: endpoint { + remote-endpoint = <&xbar_adx4_out2_ep>; + }; + }; + + adx4_out3_port: port@3 { + reg = <3>; + + adx4_out3_ep: endpoint { + remote-endpoint = <&xbar_adx4_out3_ep>; + }; + }; + + adx4_out4_port: port@4 { + reg = <4>; + + adx4_out4_ep: endpoint { + remote-endpoint = <&xbar_adx4_out4_ep>; + }; + }; + }; + }; + + dmic@2904000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dmic1_cif_ep: endpoint { + remote-endpoint = <&xbar_dmic1_ep>; + }; + }; + + dmic1_port: port@1 { + reg = <1>; + + dmic1_dap_ep: endpoint { + /* Place holder for external Codec */ + }; + }; + }; + }; + + dmic@2904100 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dmic2_cif_ep: endpoint { + remote-endpoint = <&xbar_dmic2_ep>; + }; + }; + + dmic2_port: port@1 { + reg = <1>; + + dmic2_dap_ep: endpoint { + /* Place holder for external Codec */ + }; + }; + }; + }; + + dmic@2904300 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dmic4_cif_ep: endpoint { + remote-endpoint = <&xbar_dmic4_ep>; + }; + }; + + dmic4_port: port@1 { + reg = <1>; + + dmic4_dap_ep: endpoint { + /* Place holder for external Codec */ + }; + }; + }; + }; + + dspk@2905000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dspk1_cif_ep: endpoint { + remote-endpoint = <&xbar_dspk1_ep>; + }; + }; + + dspk1_port: port@1 { + reg = <1>; + + dspk1_dap_ep: endpoint { + /* Place holder for external Codec */ + }; + }; + }; + }; + + dspk@2905100 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dspk2_cif_ep: endpoint { + remote-endpoint = <&xbar_dspk2_ep>; + }; + }; + + dspk2_port: port@1 { + reg = <1>; + + dspk2_dap_ep: endpoint { + /* Place holder for external Codec */ + }; + }; + }; + }; + + processing-engine@2908000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + + ope1_cif_in_ep: endpoint { + remote-endpoint = <&xbar_ope1_in_ep>; + }; + }; + + ope1_out_port: port@1 { + reg = <0x1>; + + ope1_cif_out_ep: endpoint { + remote-endpoint = <&xbar_ope1_out_ep>; + }; + }; + }; + }; + + mvc@290a000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mvc1_cif_in_ep: endpoint { + remote-endpoint = <&xbar_mvc1_in_ep>; + }; + }; + + mvc1_out_port: port@1 { + reg = <1>; + + mvc1_cif_out_ep: endpoint { + remote-endpoint = <&xbar_mvc1_out_ep>; + }; + }; + }; + }; + + mvc@290a200 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mvc2_cif_in_ep: endpoint { + remote-endpoint = <&xbar_mvc2_in_ep>; + }; + }; + + mvc2_out_port: port@1 { + reg = <1>; + + mvc2_cif_out_ep: endpoint { + remote-endpoint = <&xbar_mvc2_out_ep>; + }; + }; + }; + }; + + amixer@290bb00 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + + mixer_in1_ep: endpoint { + remote-endpoint = <&xbar_mixer_in1_ep>; + }; + }; + + port@1 { + reg = <0x1>; + + mixer_in2_ep: endpoint { + remote-endpoint = <&xbar_mixer_in2_ep>; + }; + }; + + port@2 { + reg = <0x2>; + + mixer_in3_ep: endpoint { + remote-endpoint = <&xbar_mixer_in3_ep>; + }; + }; + + port@3 { + reg = <0x3>; + + mixer_in4_ep: endpoint { + remote-endpoint = <&xbar_mixer_in4_ep>; + }; + }; + + port@4 { + reg = <0x4>; + + mixer_in5_ep: endpoint { + remote-endpoint = <&xbar_mixer_in5_ep>; + }; + }; + + port@5 { + reg = <0x5>; + + mixer_in6_ep: endpoint { + remote-endpoint = <&xbar_mixer_in6_ep>; + }; + }; + + port@6 { + reg = <0x6>; + + mixer_in7_ep: endpoint { + remote-endpoint = <&xbar_mixer_in7_ep>; + }; + }; + + port@7 { + reg = <0x7>; + + mixer_in8_ep: endpoint { + remote-endpoint = <&xbar_mixer_in8_ep>; + }; + }; + + port@8 { + reg = <0x8>; + + mixer_in9_ep: endpoint { + remote-endpoint = <&xbar_mixer_in9_ep>; + }; + }; + + port@9 { + reg = <0x9>; + + mixer_in10_ep: endpoint { + remote-endpoint = <&xbar_mixer_in10_ep>; + }; + }; + + mixer_out1_port: port@a { + reg = <0xa>; + + mixer_out1_ep: endpoint { + remote-endpoint = <&xbar_mixer_out1_ep>; + }; + }; + + mixer_out2_port: port@b { + reg = <0xb>; + + mixer_out2_ep: endpoint { + remote-endpoint = <&xbar_mixer_out2_ep>; + }; + }; + + mixer_out3_port: port@c { + reg = <0xc>; + + mixer_out3_ep: endpoint { + remote-endpoint = <&xbar_mixer_out3_ep>; + }; + }; + + mixer_out4_port: port@d { + reg = <0xd>; + + mixer_out4_ep: endpoint { + remote-endpoint = <&xbar_mixer_out4_ep>; + }; + }; + + mixer_out5_port: port@e { + reg = <0xe>; + + mixer_out5_ep: endpoint { + remote-endpoint = <&xbar_mixer_out5_ep>; + }; + }; + }; + }; + + admaif@290f000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + admaif0_port: port@0 { + reg = <0x0>; + + admaif0_ep: endpoint { + remote-endpoint = <&xbar_admaif0_ep>; + }; + }; + + admaif1_port: port@1 { + reg = <0x1>; + + admaif1_ep: endpoint { + remote-endpoint = <&xbar_admaif1_ep>; + }; + }; + + admaif2_port: port@2 { + reg = <0x2>; + + admaif2_ep: endpoint { + remote-endpoint = <&xbar_admaif2_ep>; + }; + }; + + admaif3_port: port@3 { + reg = <0x3>; + + admaif3_ep: endpoint { + remote-endpoint = <&xbar_admaif3_ep>; + }; + }; + + admaif4_port: port@4 { + reg = <0x4>; + + admaif4_ep: endpoint { + remote-endpoint = <&xbar_admaif4_ep>; + }; + }; + + admaif5_port: port@5 { + reg = <0x5>; + + admaif5_ep: endpoint { + remote-endpoint = <&xbar_admaif5_ep>; + }; + }; + + admaif6_port: port@6 { + reg = <0x6>; + + admaif6_ep: endpoint { + remote-endpoint = <&xbar_admaif6_ep>; + }; + }; + + admaif7_port: port@7 { + reg = <0x7>; + + admaif7_ep: endpoint { + remote-endpoint = <&xbar_admaif7_ep>; + }; + }; + + admaif8_port: port@8 { + reg = <0x8>; + + admaif8_ep: endpoint { + remote-endpoint = <&xbar_admaif8_ep>; + }; + }; + + admaif9_port: port@9 { + reg = <0x9>; + + admaif9_ep: endpoint { + remote-endpoint = <&xbar_admaif9_ep>; + }; + }; + + admaif10_port: port@a { + reg = <0xa>; + + admaif10_ep: endpoint { + remote-endpoint = <&xbar_admaif10_ep>; + }; + }; + + admaif11_port: port@b { + reg = <0xb>; + + admaif11_ep: endpoint { + remote-endpoint = <&xbar_admaif11_ep>; + }; + }; + + admaif12_port: port@c { + reg = <0xc>; + + admaif12_ep: endpoint { + remote-endpoint = <&xbar_admaif12_ep>; + }; + }; + + admaif13_port: port@d { + reg = <0xd>; + + admaif13_ep: endpoint { + remote-endpoint = <&xbar_admaif13_ep>; + }; + }; + + admaif14_port: port@e { + reg = <0xe>; + + admaif14_ep: endpoint { + remote-endpoint = <&xbar_admaif14_ep>; + }; + }; + + admaif15_port: port@f { + reg = <0xf>; + + admaif15_ep: endpoint { + remote-endpoint = <&xbar_admaif15_ep>; + }; + }; + + admaif16_port: port@10 { + reg = <0x10>; + + admaif16_ep: endpoint { + remote-endpoint = <&xbar_admaif16_ep>; + }; + }; + + admaif17_port: port@11 { + reg = <0x11>; + + admaif17_ep: endpoint { + remote-endpoint = <&xbar_admaif17_ep>; + }; + }; + + admaif18_port: port@12 { + reg = <0x12>; + + admaif18_ep: endpoint { + remote-endpoint = <&xbar_admaif18_ep>; + }; + }; + + admaif19_port: port@13 { + reg = <0x13>; + + admaif19_ep: endpoint { + remote-endpoint = <&xbar_admaif19_ep>; + }; + }; + }; + }; + + asrc@2910000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + + asrc_in1_ep: endpoint { + remote-endpoint = <&xbar_asrc_in1_ep>; + }; + }; + + port@1 { + reg = <0x1>; + + asrc_in2_ep: endpoint { + remote-endpoint = <&xbar_asrc_in2_ep>; + }; + }; + + port@2 { + reg = <0x2>; + + asrc_in3_ep: endpoint { + remote-endpoint = <&xbar_asrc_in3_ep>; + }; + }; + + port@3 { + reg = <0x3>; + + asrc_in4_ep: endpoint { + remote-endpoint = <&xbar_asrc_in4_ep>; + }; + }; + + port@4 { + reg = <0x4>; + + asrc_in5_ep: endpoint { + remote-endpoint = <&xbar_asrc_in5_ep>; + }; + }; + + port@5 { + reg = <0x5>; + + asrc_in6_ep: endpoint { + remote-endpoint = <&xbar_asrc_in6_ep>; + }; + }; + + port@6 { + reg = <0x6>; + + asrc_in7_ep: endpoint { + remote-endpoint = <&xbar_asrc_in7_ep>; + }; + }; + + asrc_out1_port: port@7 { + reg = <0x7>; + + asrc_out1_ep: endpoint { + remote-endpoint = <&xbar_asrc_out1_ep>; + }; + }; + + asrc_out2_port: port@8 { + reg = <0x8>; + + asrc_out2_ep: endpoint { + remote-endpoint = <&xbar_asrc_out2_ep>; + }; + }; + + asrc_out3_port: port@9 { + reg = <0x9>; + + asrc_out3_ep: endpoint { + remote-endpoint = <&xbar_asrc_out3_ep>; + }; + }; + + asrc_out4_port: port@a { + reg = <0xa>; + + asrc_out4_ep: endpoint { + remote-endpoint = <&xbar_asrc_out4_ep>; + }; + }; + + asrc_out5_port: port@b { + reg = <0xb>; + + asrc_out5_ep: endpoint { + remote-endpoint = <&xbar_asrc_out5_ep>; + }; + }; + + asrc_out6_port: port@c { + reg = <0xc>; + + asrc_out6_ep: endpoint { + remote-endpoint = <&xbar_asrc_out6_ep>; + }; + }; + }; + }; ports { #address-cells = <1>; @@ -895,1168 +2045,15 @@ }; }; }; + }; - admaif@290f000 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - admaif0_port: port@0 { - reg = <0x0>; - - admaif0_ep: endpoint { - remote-endpoint = <&xbar_admaif0_ep>; - }; - }; - - admaif1_port: port@1 { - reg = <0x1>; - - admaif1_ep: endpoint { - remote-endpoint = <&xbar_admaif1_ep>; - }; - }; - - admaif2_port: port@2 { - reg = <0x2>; - - admaif2_ep: endpoint { - remote-endpoint = <&xbar_admaif2_ep>; - }; - }; - - admaif3_port: port@3 { - reg = <0x3>; - - admaif3_ep: endpoint { - remote-endpoint = <&xbar_admaif3_ep>; - }; - }; - - admaif4_port: port@4 { - reg = <0x4>; - - admaif4_ep: endpoint { - remote-endpoint = <&xbar_admaif4_ep>; - }; - }; - - admaif5_port: port@5 { - reg = <0x5>; - - admaif5_ep: endpoint { - remote-endpoint = <&xbar_admaif5_ep>; - }; - }; - - admaif6_port: port@6 { - reg = <0x6>; - - admaif6_ep: endpoint { - remote-endpoint = <&xbar_admaif6_ep>; - }; - }; - - admaif7_port: port@7 { - reg = <0x7>; - - admaif7_ep: endpoint { - remote-endpoint = <&xbar_admaif7_ep>; - }; - }; - - admaif8_port: port@8 { - reg = <0x8>; - - admaif8_ep: endpoint { - remote-endpoint = <&xbar_admaif8_ep>; - }; - }; - - admaif9_port: port@9 { - reg = <0x9>; - - admaif9_ep: endpoint { - remote-endpoint = <&xbar_admaif9_ep>; - }; - }; - - admaif10_port: port@a { - reg = <0xa>; - - admaif10_ep: endpoint { - remote-endpoint = <&xbar_admaif10_ep>; - }; - }; - - admaif11_port: port@b { - reg = <0xb>; - - admaif11_ep: endpoint { - remote-endpoint = <&xbar_admaif11_ep>; - }; - }; - - admaif12_port: port@c { - reg = <0xc>; - - admaif12_ep: endpoint { - remote-endpoint = <&xbar_admaif12_ep>; - }; - }; - - admaif13_port: port@d { - reg = <0xd>; - - admaif13_ep: endpoint { - remote-endpoint = <&xbar_admaif13_ep>; - }; - }; - - admaif14_port: port@e { - reg = <0xe>; - - admaif14_ep: endpoint { - remote-endpoint = <&xbar_admaif14_ep>; - }; - }; - - admaif15_port: port@f { - reg = <0xf>; - - admaif15_ep: endpoint { - remote-endpoint = <&xbar_admaif15_ep>; - }; - }; - - admaif16_port: port@10 { - reg = <0x10>; - - admaif16_ep: endpoint { - remote-endpoint = <&xbar_admaif16_ep>; - }; - }; - - admaif17_port: port@11 { - reg = <0x11>; - - admaif17_ep: endpoint { - remote-endpoint = <&xbar_admaif17_ep>; - }; - }; - - admaif18_port: port@12 { - reg = <0x12>; - - admaif18_ep: endpoint { - remote-endpoint = <&xbar_admaif18_ep>; - }; - }; - - admaif19_port: port@13 { - reg = <0x13>; - - admaif19_ep: endpoint { - remote-endpoint = <&xbar_admaif19_ep>; - }; - }; - }; - }; - - i2s@2901200 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - i2s3_cif_ep: endpoint { - remote-endpoint = <&xbar_i2s3_ep>; - }; - }; - - i2s3_port: port@1 { - reg = <1>; - - i2s3_dap_ep: endpoint { - dai-format = "i2s"; - /* Place holder for external Codec */ - }; - }; - }; - }; - - i2s@2901400 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - i2s5_cif_ep: endpoint { - remote-endpoint = <&xbar_i2s5_ep>; - }; - }; - - i2s5_port: port@1 { - reg = <1>; - - i2s5_dap_ep: endpoint { - dai-format = "i2s"; - /* Place holder for external Codec */ - }; - }; - }; - }; - - dmic@2904000 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - dmic1_cif_ep: endpoint { - remote-endpoint = <&xbar_dmic1_ep>; - }; - }; - - dmic1_port: port@1 { - reg = <1>; - - dmic1_dap_ep: endpoint { - /* Place holder for external Codec */ - }; - }; - }; - }; - - dmic@2904100 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - dmic2_cif_ep: endpoint { - remote-endpoint = <&xbar_dmic2_ep>; - }; - }; - - dmic2_port: port@1 { - reg = <1>; - - dmic2_dap_ep: endpoint { - /* Place holder for external Codec */ - }; - }; - }; - }; - - dmic@2904300 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - dmic4_cif_ep: endpoint { - remote-endpoint = <&xbar_dmic4_ep>; - }; - }; - - dmic4_port: port@1 { - reg = <1>; - - dmic4_dap_ep: endpoint { - /* Place holder for external Codec */ - }; - }; - }; - }; - - dspk@2905000 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - dspk1_cif_ep: endpoint { - remote-endpoint = <&xbar_dspk1_ep>; - }; - }; - - dspk1_port: port@1 { - reg = <1>; - - dspk1_dap_ep: endpoint { - /* Place holder for external Codec */ - }; - }; - }; - }; - - dspk@2905100 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - dspk2_cif_ep: endpoint { - remote-endpoint = <&xbar_dspk2_ep>; - }; - }; - - dspk2_port: port@1 { - reg = <1>; - - dspk2_dap_ep: endpoint { - /* Place holder for external Codec */ - }; - }; - }; - }; - - sfc@2902000 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - sfc1_cif_in_ep: endpoint { - remote-endpoint = <&xbar_sfc1_in_ep>; - convert-rate = <44100>; - }; - }; - - sfc1_out_port: port@1 { - reg = <1>; - - sfc1_cif_out_ep: endpoint { - remote-endpoint = <&xbar_sfc1_out_ep>; - convert-rate = <48000>; - }; - }; - }; - }; - - sfc@2902200 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - sfc2_cif_in_ep: endpoint { - remote-endpoint = <&xbar_sfc2_in_ep>; - }; - }; - - sfc2_out_port: port@1 { - reg = <1>; - - sfc2_cif_out_ep: endpoint { - remote-endpoint = <&xbar_sfc2_out_ep>; - }; - }; - }; - }; - - sfc@2902400 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - sfc3_cif_in_ep: endpoint { - remote-endpoint = <&xbar_sfc3_in_ep>; - }; - }; - - sfc3_out_port: port@1 { - reg = <1>; - - sfc3_cif_out_ep: endpoint { - remote-endpoint = <&xbar_sfc3_out_ep>; - }; - }; - }; - }; - - sfc@2902600 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - sfc4_cif_in_ep: endpoint { - remote-endpoint = <&xbar_sfc4_in_ep>; - }; - }; - - sfc4_out_port: port@1 { - reg = <1>; - - sfc4_cif_out_ep: endpoint { - remote-endpoint = <&xbar_sfc4_out_ep>; - }; - }; - }; - }; - - mvc@290a000 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - mvc1_cif_in_ep: endpoint { - remote-endpoint = <&xbar_mvc1_in_ep>; - }; - }; - - mvc1_out_port: port@1 { - reg = <1>; - - mvc1_cif_out_ep: endpoint { - remote-endpoint = <&xbar_mvc1_out_ep>; - }; - }; - }; - }; - - mvc@290a200 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - mvc2_cif_in_ep: endpoint { - remote-endpoint = <&xbar_mvc2_in_ep>; - }; - }; - - mvc2_out_port: port@1 { - reg = <1>; - - mvc2_cif_out_ep: endpoint { - remote-endpoint = <&xbar_mvc2_out_ep>; - }; - }; - }; - }; - - amx@2903000 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - amx1_in1_ep: endpoint { - remote-endpoint = <&xbar_amx1_in1_ep>; - }; - }; - - port@1 { - reg = <1>; - - amx1_in2_ep: endpoint { - remote-endpoint = <&xbar_amx1_in2_ep>; - }; - }; - - port@2 { - reg = <2>; - - amx1_in3_ep: endpoint { - remote-endpoint = <&xbar_amx1_in3_ep>; - }; - }; - - port@3 { - reg = <3>; - - amx1_in4_ep: endpoint { - remote-endpoint = <&xbar_amx1_in4_ep>; - }; - }; - - amx1_out_port: port@4 { - reg = <4>; - - amx1_out_ep: endpoint { - remote-endpoint = <&xbar_amx1_out_ep>; - }; - }; - }; - }; - - amx@2903100 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - amx2_in1_ep: endpoint { - remote-endpoint = <&xbar_amx2_in1_ep>; - }; - }; - - port@1 { - reg = <1>; - - amx2_in2_ep: endpoint { - remote-endpoint = <&xbar_amx2_in2_ep>; - }; - }; - - amx2_in3_port: port@2 { - reg = <2>; - - amx2_in3_ep: endpoint { - remote-endpoint = <&xbar_amx2_in3_ep>; - }; - }; - - amx2_in4_port: port@3 { - reg = <3>; - - amx2_in4_ep: endpoint { - remote-endpoint = <&xbar_amx2_in4_ep>; - }; - }; - - amx2_out_port: port@4 { - reg = <4>; - - amx2_out_ep: endpoint { - remote-endpoint = <&xbar_amx2_out_ep>; - }; - }; - }; - }; - - amx@2903200 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - amx3_in1_ep: endpoint { - remote-endpoint = <&xbar_amx3_in1_ep>; - }; - }; - - port@1 { - reg = <1>; - - amx3_in2_ep: endpoint { - remote-endpoint = <&xbar_amx3_in2_ep>; - }; - }; - - port@2 { - reg = <2>; - - amx3_in3_ep: endpoint { - remote-endpoint = <&xbar_amx3_in3_ep>; - }; - }; - - port@3 { - reg = <3>; - - amx3_in4_ep: endpoint { - remote-endpoint = <&xbar_amx3_in4_ep>; - }; - }; - - amx3_out_port: port@4 { - reg = <4>; - - amx3_out_ep: endpoint { - remote-endpoint = <&xbar_amx3_out_ep>; - }; - }; - }; - }; - - amx@2903300 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - amx4_in1_ep: endpoint { - remote-endpoint = <&xbar_amx4_in1_ep>; - }; - }; - - port@1 { - reg = <1>; - - amx4_in2_ep: endpoint { - remote-endpoint = <&xbar_amx4_in2_ep>; - }; - }; - - port@2 { - reg = <2>; - - amx4_in3_ep: endpoint { - remote-endpoint = <&xbar_amx4_in3_ep>; - }; - }; - - port@3 { - reg = <3>; - - amx4_in4_ep: endpoint { - remote-endpoint = <&xbar_amx4_in4_ep>; - }; - }; - - amx4_out_port: port@4 { - reg = <4>; - - amx4_out_ep: endpoint { - remote-endpoint = <&xbar_amx4_out_ep>; - }; - }; - }; - }; - - adx@2903800 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - adx1_in_ep: endpoint { - remote-endpoint = <&xbar_adx1_in_ep>; - }; - }; - - adx1_out1_port: port@1 { - reg = <1>; - - adx1_out1_ep: endpoint { - remote-endpoint = <&xbar_adx1_out1_ep>; - }; - }; - - adx1_out2_port: port@2 { - reg = <2>; - - adx1_out2_ep: endpoint { - remote-endpoint = <&xbar_adx1_out2_ep>; - }; - }; - - adx1_out3_port: port@3 { - reg = <3>; - - adx1_out3_ep: endpoint { - remote-endpoint = <&xbar_adx1_out3_ep>; - }; - }; - - adx1_out4_port: port@4 { - reg = <4>; - - adx1_out4_ep: endpoint { - remote-endpoint = <&xbar_adx1_out4_ep>; - }; - }; - }; - }; - - adx@2903900 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - adx2_in_ep: endpoint { - remote-endpoint = <&xbar_adx2_in_ep>; - }; - }; - - adx2_out1_port: port@1 { - reg = <1>; - - adx2_out1_ep: endpoint { - remote-endpoint = <&xbar_adx2_out1_ep>; - }; - }; - - adx2_out2_port: port@2 { - reg = <2>; - - adx2_out2_ep: endpoint { - remote-endpoint = <&xbar_adx2_out2_ep>; - }; - }; - - adx2_out3_port: port@3 { - reg = <3>; - - adx2_out3_ep: endpoint { - remote-endpoint = <&xbar_adx2_out3_ep>; - }; - }; - - adx2_out4_port: port@4 { - reg = <4>; - - adx2_out4_ep: endpoint { - remote-endpoint = <&xbar_adx2_out4_ep>; - }; - }; - }; - }; - - adx@2903a00 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - adx3_in_ep: endpoint { - remote-endpoint = <&xbar_adx3_in_ep>; - }; - }; - - adx3_out1_port: port@1 { - reg = <1>; - - adx3_out1_ep: endpoint { - remote-endpoint = <&xbar_adx3_out1_ep>; - }; - }; - - adx3_out2_port: port@2 { - reg = <2>; - - adx3_out2_ep: endpoint { - remote-endpoint = <&xbar_adx3_out2_ep>; - }; - }; - - adx3_out3_port: port@3 { - reg = <3>; - - adx3_out3_ep: endpoint { - remote-endpoint = <&xbar_adx3_out3_ep>; - }; - }; - - adx3_out4_port: port@4 { - reg = <4>; - - adx3_out4_ep: endpoint { - remote-endpoint = <&xbar_adx3_out4_ep>; - }; - }; - }; - }; - - adx@2903b00 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - adx4_in_ep: endpoint { - remote-endpoint = <&xbar_adx4_in_ep>; - }; - }; - - adx4_out1_port: port@1 { - reg = <1>; - - adx4_out1_ep: endpoint { - remote-endpoint = <&xbar_adx4_out1_ep>; - }; - }; - - adx4_out2_port: port@2 { - reg = <2>; - - adx4_out2_ep: endpoint { - remote-endpoint = <&xbar_adx4_out2_ep>; - }; - }; - - adx4_out3_port: port@3 { - reg = <3>; - - adx4_out3_ep: endpoint { - remote-endpoint = <&xbar_adx4_out3_ep>; - }; - }; - - adx4_out4_port: port@4 { - reg = <4>; - - adx4_out4_ep: endpoint { - remote-endpoint = <&xbar_adx4_out4_ep>; - }; - }; - }; - }; - - processing-engine@2908000 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0x0>; - - ope1_cif_in_ep: endpoint { - remote-endpoint = <&xbar_ope1_in_ep>; - }; - }; - - ope1_out_port: port@1 { - reg = <0x1>; - - ope1_cif_out_ep: endpoint { - remote-endpoint = <&xbar_ope1_out_ep>; - }; - }; - }; - }; - - amixer@290bb00 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0x0>; - - mixer_in1_ep: endpoint { - remote-endpoint = <&xbar_mixer_in1_ep>; - }; - }; - - port@1 { - reg = <0x1>; - - mixer_in2_ep: endpoint { - remote-endpoint = <&xbar_mixer_in2_ep>; - }; - }; - - port@2 { - reg = <0x2>; - - mixer_in3_ep: endpoint { - remote-endpoint = <&xbar_mixer_in3_ep>; - }; - }; - - port@3 { - reg = <0x3>; - - mixer_in4_ep: endpoint { - remote-endpoint = <&xbar_mixer_in4_ep>; - }; - }; - - port@4 { - reg = <0x4>; - - mixer_in5_ep: endpoint { - remote-endpoint = <&xbar_mixer_in5_ep>; - }; - }; - - port@5 { - reg = <0x5>; - - mixer_in6_ep: endpoint { - remote-endpoint = <&xbar_mixer_in6_ep>; - }; - }; - - port@6 { - reg = <0x6>; - - mixer_in7_ep: endpoint { - remote-endpoint = <&xbar_mixer_in7_ep>; - }; - }; - - port@7 { - reg = <0x7>; - - mixer_in8_ep: endpoint { - remote-endpoint = <&xbar_mixer_in8_ep>; - }; - }; - - port@8 { - reg = <0x8>; - - mixer_in9_ep: endpoint { - remote-endpoint = <&xbar_mixer_in9_ep>; - }; - }; - - port@9 { - reg = <0x9>; - - mixer_in10_ep: endpoint { - remote-endpoint = <&xbar_mixer_in10_ep>; - }; - }; - - mixer_out1_port: port@a { - reg = <0xa>; - - mixer_out1_ep: endpoint { - remote-endpoint = <&xbar_mixer_out1_ep>; - }; - }; - - mixer_out2_port: port@b { - reg = <0xb>; - - mixer_out2_ep: endpoint { - remote-endpoint = <&xbar_mixer_out2_ep>; - }; - }; - - mixer_out3_port: port@c { - reg = <0xc>; - - mixer_out3_ep: endpoint { - remote-endpoint = <&xbar_mixer_out3_ep>; - }; - }; - - mixer_out4_port: port@d { - reg = <0xd>; - - mixer_out4_ep: endpoint { - remote-endpoint = <&xbar_mixer_out4_ep>; - }; - }; - - mixer_out5_port: port@e { - reg = <0xe>; - - mixer_out5_ep: endpoint { - remote-endpoint = <&xbar_mixer_out5_ep>; - }; - }; - }; - }; - - asrc@2910000 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0x0>; - - asrc_in1_ep: endpoint { - remote-endpoint = <&xbar_asrc_in1_ep>; - }; - }; - - port@1 { - reg = <0x1>; - - asrc_in2_ep: endpoint { - remote-endpoint = <&xbar_asrc_in2_ep>; - }; - }; - - port@2 { - reg = <0x2>; - - asrc_in3_ep: endpoint { - remote-endpoint = <&xbar_asrc_in3_ep>; - }; - }; - - port@3 { - reg = <0x3>; - - asrc_in4_ep: endpoint { - remote-endpoint = <&xbar_asrc_in4_ep>; - }; - }; - - port@4 { - reg = <0x4>; - - asrc_in5_ep: endpoint { - remote-endpoint = <&xbar_asrc_in5_ep>; - }; - }; - - port@5 { - reg = <0x5>; - - asrc_in6_ep: endpoint { - remote-endpoint = <&xbar_asrc_in6_ep>; - }; - }; - - port@6 { - reg = <0x6>; - - asrc_in7_ep: endpoint { - remote-endpoint = <&xbar_asrc_in7_ep>; - }; - }; - - asrc_out1_port: port@7 { - reg = <0x7>; - - asrc_out1_ep: endpoint { - remote-endpoint = <&xbar_asrc_out1_ep>; - }; - }; - - asrc_out2_port: port@8 { - reg = <0x8>; - - asrc_out2_ep: endpoint { - remote-endpoint = <&xbar_asrc_out2_ep>; - }; - }; - - asrc_out3_port: port@9 { - reg = <0x9>; - - asrc_out3_ep: endpoint { - remote-endpoint = <&xbar_asrc_out3_ep>; - }; - }; - - asrc_out4_port: port@a { - reg = <0xa>; - - asrc_out4_ep: endpoint { - remote-endpoint = <&xbar_asrc_out4_ep>; - }; - }; - - asrc_out5_port: port@b { - reg = <0xb>; - - asrc_out5_ep: endpoint { - remote-endpoint = <&xbar_asrc_out5_ep>; - }; - }; - - asrc_out6_port: port@c { - reg = <0xc>; - - asrc_out6_ep: endpoint { - remote-endpoint = <&xbar_asrc_out6_ep>; - }; - }; - }; - }; + dma-controller@2930000 { + status = "okay"; }; - }; - ddc: i2c@3190000 { - status = "okay"; + interrupt-controller@2a40000 { + status = "okay"; + }; }; i2c@3160000 { @@ -2073,6 +2070,26 @@ }; }; + ddc: i2c@3190000 { + status = "okay"; + }; + + spi@3270000 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <102000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + }; + }; + + pwm@32d0000 { + status = "okay"; + }; + hda@3510000 { nvidia,model = "NVIDIA Jetson Xavier NX HDA"; status = "okay"; @@ -2141,15 +2158,6 @@ }; }; - usb@3610000 { - status = "okay"; - - phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-1}>, - <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-2}>, - <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-2}>; - phy-names = "usb2-1", "usb2-2", "usb3-2"; - }; - usb@3550000 { status = "okay"; @@ -2157,20 +2165,13 @@ phy-names = "usb2-0"; }; - spi@3270000 { + usb@3610000 { status = "okay"; - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <102000000>; - spi-tx-bus-width = <4>; - spi-rx-bus-width = <4>; - }; - }; - - pwm@32d0000 { - status = "okay"; + phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-1}>, + <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-2}>, + <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-2}>; + phy-names = "usb2-1", "usb2-2", "usb3-2"; }; host1x@13e00000 { @@ -2209,54 +2210,46 @@ GPIO_ACTIVE_LOW>; }; }; - }; - - pcie@14160000 { - status = "okay"; - - vddio-pex-ctl-supply = <&vdd_1v8ao>; - phys = <&p2u_hsio_11>; - phy-names = "p2u-0"; - }; + pcie@14160000 { + status = "okay"; - pcie@141a0000 { - status = "okay"; + vddio-pex-ctl-supply = <&vdd_1v8ao>; - vddio-pex-ctl-supply = <&vdd_1v8ao>; + phys = <&p2u_hsio_11>; + phy-names = "p2u-0"; + }; - phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>, - <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>, - <&p2u_nvhs_6>, <&p2u_nvhs_7>; + pcie@141a0000 { + status = "okay"; - phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4", - "p2u-5", "p2u-6", "p2u-7"; - }; + vddio-pex-ctl-supply = <&vdd_1v8ao>; - pcie-ep@141a0000 { - status = "disabled"; + phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>, + <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>, + <&p2u_nvhs_6>, <&p2u_nvhs_7>; - vddio-pex-ctl-supply = <&vdd_1v8ao>; + phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4", + "p2u-5", "p2u-6", "p2u-7"; + }; - reset-gpios = <&gpio TEGRA194_MAIN_GPIO(GG, 1) GPIO_ACTIVE_LOW>; + pcie-ep@141a0000 { + status = "disabled"; - nvidia,refclk-select-gpios = <&gpio_aon TEGRA194_AON_GPIO(AA, 5) - GPIO_ACTIVE_HIGH>; + vddio-pex-ctl-supply = <&vdd_1v8ao>; - phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>, - <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>, - <&p2u_nvhs_6>, <&p2u_nvhs_7>; + reset-gpios = <&gpio TEGRA194_MAIN_GPIO(GG, 1) GPIO_ACTIVE_LOW>; - phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4", - "p2u-5", "p2u-6", "p2u-7"; - }; + nvidia,refclk-select-gpios = <&gpio_aon TEGRA194_AON_GPIO(AA, 5) + GPIO_ACTIVE_HIGH>; - fan: pwm-fan { - compatible = "pwm-fan"; - pwms = <&pwm6 0 45334>; + phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>, + <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>, + <&p2u_nvhs_6>, <&p2u_nvhs_7>; - cooling-levels = <0 64 128 255>; - #cooling-cells = <2>; + phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4", + "p2u-5", "p2u-6", "p2u-7"; + }; }; gpio-keys { @@ -2283,6 +2276,14 @@ }; }; + fan: pwm-fan { + compatible = "pwm-fan"; + pwms = <&pwm6 0 45334>; + + cooling-levels = <0 64 128 255>; + #cooling-cells = <2>; + }; + vdd_5v0_sys: regulator-vdd-5v0-sys { compatible = "regulator-fixed"; regulator-name = "VDD_5V_SYS"; diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p3668.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p3668.dtsi index 0751edddf7d5..58f190b0f868 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194-p3668.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194-p3668.dtsi @@ -121,6 +121,24 @@ pinctrl-names = "default"; pinctrl-0 = <&max20024_default>; + fps { + fps0 { + maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>; + maxim,shutdown-fps-time-period-us = <640>; + }; + + fps1 { + maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>; + maxim,shutdown-fps-time-period-us = <640>; + maxim,device-state-on-disabled-event = <MAX77620_FPS_INACTIVE_STATE_SLEEP>; + }; + + fps2 { + maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>; + maxim,shutdown-fps-time-period-us = <640>; + }; + }; + max20024_default: pinmux { gpio0 { pins = "gpio0"; @@ -164,24 +182,6 @@ }; }; - fps { - fps0 { - maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>; - maxim,shutdown-fps-time-period-us = <640>; - }; - - fps1 { - maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>; - maxim,shutdown-fps-time-period-us = <640>; - maxim,device-state-on-disabled-event = <MAX77620_FPS_INACTIVE_STATE_SLEEP>; - }; - - fps2 { - maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>; - maxim,shutdown-fps-time-period-us = <640>; - }; - }; - regulators { in-sd0-supply = <&vdd_5v0_sys>; in-sd1-supply = <&vdd_5v0_sys>; diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi index 4afcbd60e144..133dbe5b429d 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi @@ -19,21 +19,22 @@ /* control backbone */ bus@0 { compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x0 0x0 0x40000000>; + + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x0 0x0 0x40000000>; apbmisc: misc@100000 { compatible = "nvidia,tegra194-misc"; - reg = <0x00100000 0xf000>, - <0x0010f000 0x1000>; + reg = <0x0 0x00100000 0x0 0xf000>, + <0x0 0x0010f000 0x0 0x1000>; }; gpio: gpio@2200000 { compatible = "nvidia,tegra194-gpio"; reg-names = "security", "gpio"; - reg = <0x2200000 0x10000>, - <0x2210000 0x10000>; + reg = <0x0 0x2200000 0x0 0x10000>, + <0x0 0x2210000 0x0 0x10000>; interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>, @@ -91,7 +92,7 @@ cbb-noc@2300000 { compatible = "nvidia,tegra194-cbb-noc"; - reg = <0x02300000 0x1000>; + reg = <0x0 0x02300000 0x0 0x1000>; interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>; nvidia,axi2apb = <&axi2apb>; @@ -101,20 +102,48 @@ axi2apb: axi2apb@2390000 { compatible = "nvidia,tegra194-axi2apb"; - reg = <0x2390000 0x1000>, - <0x23a0000 0x1000>, - <0x23b0000 0x1000>, - <0x23c0000 0x1000>, - <0x23d0000 0x1000>, - <0x23e0000 0x1000>; + reg = <0x0 0x2390000 0x0 0x1000>, + <0x0 0x23a0000 0x0 0x1000>, + <0x0 0x23b0000 0x0 0x1000>, + <0x0 0x23c0000 0x0 0x1000>, + <0x0 0x23d0000 0x0 0x1000>, + <0x0 0x23e0000 0x0 0x1000>; + status = "okay"; + }; + + pinmux: pinmux@2430000 { + compatible = "nvidia,tegra194-pinmux"; + reg = <0x0 0x2430000 0x0 0x17000>; status = "okay"; + + pex_clkreq_c5_bi_dir_state: pinmux-pex-clkreq-c5-bi-dir { + clkreq { + nvidia,pins = "pex_l5_clkreq_n_pgg0"; + nvidia,schmitt = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,io-hv = <TEGRA_PIN_ENABLE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + }; + }; + + pex_rst_c5_out_state: pinmux-pex-rst-c5-out { + pex_rst { + nvidia,pins = "pex_l5_rst_n_pgg1"; + nvidia,schmitt = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_ENABLE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + }; + }; }; ethernet@2490000 { compatible = "nvidia,tegra194-eqos", "nvidia,tegra186-eqos", "snps,dwc-qos-ethernet-4.10"; - reg = <0x02490000 0x10000>; + reg = <0x0 0x02490000 0x0 0x10000>; interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA194_CLK_AXI_CBB>, <&bpmp TEGRA194_CLK_EQOS_AXI>, @@ -140,7 +169,7 @@ gpcdma: dma-controller@2600000 { compatible = "nvidia,tegra194-gpcdma", "nvidia,tegra186-gpcdma"; - reg = <0x2600000 0x210000>; + reg = <0x0 0x2600000 0x0 0x210000>; resets = <&bpmp TEGRA194_RESET_GPCDMA>; reset-names = "gpcdma"; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>, @@ -189,137 +218,30 @@ <&bpmp TEGRA194_CLK_APB2APE>; clock-names = "ape", "apb2ape"; power-domains = <&bpmp TEGRA194_POWER_DOMAIN_AUD>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x02900000 0x02900000 0x200000>; status = "disabled"; - adma: dma-controller@2930000 { - compatible = "nvidia,tegra194-adma", - "nvidia,tegra186-adma"; - reg = <0x02930000 0x20000>; - interrupt-parent = <&agic>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; - #dma-cells = <1>; - clocks = <&bpmp TEGRA194_CLK_AHUB>; - clock-names = "d_audio"; - status = "disabled"; - }; - - agic: interrupt-controller@2a40000 { - compatible = "nvidia,tegra194-agic", - "nvidia,tegra210-agic"; - #interrupt-cells = <3>; - interrupt-controller; - reg = <0x02a41000 0x1000>, - <0x02a42000 0x2000>; - interrupts = <GIC_SPI 145 - (GIC_CPU_MASK_SIMPLE(4) | - IRQ_TYPE_LEVEL_HIGH)>; - clocks = <&bpmp TEGRA194_CLK_APE>; - clock-names = "clk"; - status = "disabled"; - }; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x02900000 0x0 0x02900000 0x0 0x200000>; tegra_ahub: ahub@2900800 { compatible = "nvidia,tegra194-ahub", "nvidia,tegra186-ahub"; - reg = <0x02900800 0x800>; + reg = <0x0 0x02900800 0x0 0x800>; clocks = <&bpmp TEGRA194_CLK_AHUB>; clock-names = "ahub"; assigned-clocks = <&bpmp TEGRA194_CLK_AHUB>; assigned-clock-parents = <&bpmp TEGRA194_CLK_PLLA_OUT0>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x02900800 0x02900800 0x11800>; status = "disabled"; - tegra_admaif: admaif@290f000 { - compatible = "nvidia,tegra194-admaif", - "nvidia,tegra186-admaif"; - reg = <0x0290f000 0x1000>; - dmas = <&adma 1>, <&adma 1>, - <&adma 2>, <&adma 2>, - <&adma 3>, <&adma 3>, - <&adma 4>, <&adma 4>, - <&adma 5>, <&adma 5>, - <&adma 6>, <&adma 6>, - <&adma 7>, <&adma 7>, - <&adma 8>, <&adma 8>, - <&adma 9>, <&adma 9>, - <&adma 10>, <&adma 10>, - <&adma 11>, <&adma 11>, - <&adma 12>, <&adma 12>, - <&adma 13>, <&adma 13>, - <&adma 14>, <&adma 14>, - <&adma 15>, <&adma 15>, - <&adma 16>, <&adma 16>, - <&adma 17>, <&adma 17>, - <&adma 18>, <&adma 18>, - <&adma 19>, <&adma 19>, - <&adma 20>, <&adma 20>; - dma-names = "rx1", "tx1", - "rx2", "tx2", - "rx3", "tx3", - "rx4", "tx4", - "rx5", "tx5", - "rx6", "tx6", - "rx7", "tx7", - "rx8", "tx8", - "rx9", "tx9", - "rx10", "tx10", - "rx11", "tx11", - "rx12", "tx12", - "rx13", "tx13", - "rx14", "tx14", - "rx15", "tx15", - "rx16", "tx16", - "rx17", "tx17", - "rx18", "tx18", - "rx19", "tx19", - "rx20", "tx20"; - status = "disabled"; - interconnects = <&mc TEGRA194_MEMORY_CLIENT_APEDMAR &emc>, - <&mc TEGRA194_MEMORY_CLIENT_APEDMAW &emc>; - interconnect-names = "dma-mem", "write"; - iommus = <&smmu TEGRA194_SID_APE>; - }; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x02900800 0x0 0x02900800 0x0 0x11800>; tegra_i2s1: i2s@2901000 { compatible = "nvidia,tegra194-i2s", "nvidia,tegra210-i2s"; - reg = <0x2901000 0x100>; + reg = <0x0 0x2901000 0x0 0x100>; clocks = <&bpmp TEGRA194_CLK_I2S1>, <&bpmp TEGRA194_CLK_I2S1_SYNC_INPUT>; clock-names = "i2s", "sync_input"; @@ -333,7 +255,7 @@ tegra_i2s2: i2s@2901100 { compatible = "nvidia,tegra194-i2s", "nvidia,tegra210-i2s"; - reg = <0x2901100 0x100>; + reg = <0x0 0x2901100 0x0 0x100>; clocks = <&bpmp TEGRA194_CLK_I2S2>, <&bpmp TEGRA194_CLK_I2S2_SYNC_INPUT>; clock-names = "i2s", "sync_input"; @@ -347,7 +269,7 @@ tegra_i2s3: i2s@2901200 { compatible = "nvidia,tegra194-i2s", "nvidia,tegra210-i2s"; - reg = <0x2901200 0x100>; + reg = <0x0 0x2901200 0x0 0x100>; clocks = <&bpmp TEGRA194_CLK_I2S3>, <&bpmp TEGRA194_CLK_I2S3_SYNC_INPUT>; clock-names = "i2s", "sync_input"; @@ -361,7 +283,7 @@ tegra_i2s4: i2s@2901300 { compatible = "nvidia,tegra194-i2s", "nvidia,tegra210-i2s"; - reg = <0x2901300 0x100>; + reg = <0x0 0x2901300 0x0 0x100>; clocks = <&bpmp TEGRA194_CLK_I2S4>, <&bpmp TEGRA194_CLK_I2S4_SYNC_INPUT>; clock-names = "i2s", "sync_input"; @@ -375,7 +297,7 @@ tegra_i2s5: i2s@2901400 { compatible = "nvidia,tegra194-i2s", "nvidia,tegra210-i2s"; - reg = <0x2901400 0x100>; + reg = <0x0 0x2901400 0x0 0x100>; clocks = <&bpmp TEGRA194_CLK_I2S5>, <&bpmp TEGRA194_CLK_I2S5_SYNC_INPUT>; clock-names = "i2s", "sync_input"; @@ -389,7 +311,7 @@ tegra_i2s6: i2s@2901500 { compatible = "nvidia,tegra194-i2s", "nvidia,tegra210-i2s"; - reg = <0x2901500 0x100>; + reg = <0x0 0x2901500 0x0 0x100>; clocks = <&bpmp TEGRA194_CLK_I2S6>, <&bpmp TEGRA194_CLK_I2S6_SYNC_INPUT>; clock-names = "i2s", "sync_input"; @@ -400,88 +322,10 @@ status = "disabled"; }; - tegra_dmic1: dmic@2904000 { - compatible = "nvidia,tegra194-dmic", - "nvidia,tegra210-dmic"; - reg = <0x2904000 0x100>; - clocks = <&bpmp TEGRA194_CLK_DMIC1>; - clock-names = "dmic"; - assigned-clocks = <&bpmp TEGRA194_CLK_DMIC1>; - assigned-clock-parents = <&bpmp TEGRA194_CLK_PLLA_OUT0>; - assigned-clock-rates = <3072000>; - sound-name-prefix = "DMIC1"; - status = "disabled"; - }; - - tegra_dmic2: dmic@2904100 { - compatible = "nvidia,tegra194-dmic", - "nvidia,tegra210-dmic"; - reg = <0x2904100 0x100>; - clocks = <&bpmp TEGRA194_CLK_DMIC2>; - clock-names = "dmic"; - assigned-clocks = <&bpmp TEGRA194_CLK_DMIC2>; - assigned-clock-parents = <&bpmp TEGRA194_CLK_PLLA_OUT0>; - assigned-clock-rates = <3072000>; - sound-name-prefix = "DMIC2"; - status = "disabled"; - }; - - tegra_dmic3: dmic@2904200 { - compatible = "nvidia,tegra194-dmic", - "nvidia,tegra210-dmic"; - reg = <0x2904200 0x100>; - clocks = <&bpmp TEGRA194_CLK_DMIC3>; - clock-names = "dmic"; - assigned-clocks = <&bpmp TEGRA194_CLK_DMIC3>; - assigned-clock-parents = <&bpmp TEGRA194_CLK_PLLA_OUT0>; - assigned-clock-rates = <3072000>; - sound-name-prefix = "DMIC3"; - status = "disabled"; - }; - - tegra_dmic4: dmic@2904300 { - compatible = "nvidia,tegra194-dmic", - "nvidia,tegra210-dmic"; - reg = <0x2904300 0x100>; - clocks = <&bpmp TEGRA194_CLK_DMIC4>; - clock-names = "dmic"; - assigned-clocks = <&bpmp TEGRA194_CLK_DMIC4>; - assigned-clock-parents = <&bpmp TEGRA194_CLK_PLLA_OUT0>; - assigned-clock-rates = <3072000>; - sound-name-prefix = "DMIC4"; - status = "disabled"; - }; - - tegra_dspk1: dspk@2905000 { - compatible = "nvidia,tegra194-dspk", - "nvidia,tegra186-dspk"; - reg = <0x2905000 0x100>; - clocks = <&bpmp TEGRA194_CLK_DSPK1>; - clock-names = "dspk"; - assigned-clocks = <&bpmp TEGRA194_CLK_DSPK1>; - assigned-clock-parents = <&bpmp TEGRA194_CLK_PLLA_OUT0>; - assigned-clock-rates = <12288000>; - sound-name-prefix = "DSPK1"; - status = "disabled"; - }; - - tegra_dspk2: dspk@2905100 { - compatible = "nvidia,tegra194-dspk", - "nvidia,tegra186-dspk"; - reg = <0x2905100 0x100>; - clocks = <&bpmp TEGRA194_CLK_DSPK2>; - clock-names = "dspk"; - assigned-clocks = <&bpmp TEGRA194_CLK_DSPK2>; - assigned-clock-parents = <&bpmp TEGRA194_CLK_PLLA_OUT0>; - assigned-clock-rates = <12288000>; - sound-name-prefix = "DSPK2"; - status = "disabled"; - }; - tegra_sfc1: sfc@2902000 { compatible = "nvidia,tegra194-sfc", "nvidia,tegra210-sfc"; - reg = <0x2902000 0x200>; + reg = <0x0 0x2902000 0x0 0x200>; sound-name-prefix = "SFC1"; status = "disabled"; }; @@ -489,7 +333,7 @@ tegra_sfc2: sfc@2902200 { compatible = "nvidia,tegra194-sfc", "nvidia,tegra210-sfc"; - reg = <0x2902200 0x200>; + reg = <0x0 0x2902200 0x0 0x200>; sound-name-prefix = "SFC2"; status = "disabled"; }; @@ -497,7 +341,7 @@ tegra_sfc3: sfc@2902400 { compatible = "nvidia,tegra194-sfc", "nvidia,tegra210-sfc"; - reg = <0x2902400 0x200>; + reg = <0x0 0x2902400 0x0 0x200>; sound-name-prefix = "SFC3"; status = "disabled"; }; @@ -505,51 +349,35 @@ tegra_sfc4: sfc@2902600 { compatible = "nvidia,tegra194-sfc", "nvidia,tegra210-sfc"; - reg = <0x2902600 0x200>; + reg = <0x0 0x2902600 0x0 0x200>; sound-name-prefix = "SFC4"; status = "disabled"; }; - tegra_mvc1: mvc@290a000 { - compatible = "nvidia,tegra194-mvc", - "nvidia,tegra210-mvc"; - reg = <0x290a000 0x200>; - sound-name-prefix = "MVC1"; - status = "disabled"; - }; - - tegra_mvc2: mvc@290a200 { - compatible = "nvidia,tegra194-mvc", - "nvidia,tegra210-mvc"; - reg = <0x290a200 0x200>; - sound-name-prefix = "MVC2"; - status = "disabled"; - }; - tegra_amx1: amx@2903000 { compatible = "nvidia,tegra194-amx"; - reg = <0x2903000 0x100>; + reg = <0x0 0x2903000 0x0 0x100>; sound-name-prefix = "AMX1"; status = "disabled"; }; tegra_amx2: amx@2903100 { compatible = "nvidia,tegra194-amx"; - reg = <0x2903100 0x100>; + reg = <0x0 0x2903100 0x0 0x100>; sound-name-prefix = "AMX2"; status = "disabled"; }; tegra_amx3: amx@2903200 { compatible = "nvidia,tegra194-amx"; - reg = <0x2903200 0x100>; + reg = <0x0 0x2903200 0x0 0x100>; sound-name-prefix = "AMX3"; status = "disabled"; }; tegra_amx4: amx@2903300 { compatible = "nvidia,tegra194-amx"; - reg = <0x2903300 0x100>; + reg = <0x0 0x2903300 0x0 0x100>; sound-name-prefix = "AMX4"; status = "disabled"; }; @@ -557,7 +385,7 @@ tegra_adx1: adx@2903800 { compatible = "nvidia,tegra194-adx", "nvidia,tegra210-adx"; - reg = <0x2903800 0x100>; + reg = <0x0 0x2903800 0x0 0x100>; sound-name-prefix = "ADX1"; status = "disabled"; }; @@ -565,7 +393,7 @@ tegra_adx2: adx@2903900 { compatible = "nvidia,tegra194-adx", "nvidia,tegra210-adx"; - reg = <0x2903900 0x100>; + reg = <0x0 0x2903900 0x0 0x100>; sound-name-prefix = "ADX2"; status = "disabled"; }; @@ -573,7 +401,7 @@ tegra_adx3: adx@2903a00 { compatible = "nvidia,tegra194-adx", "nvidia,tegra210-adx"; - reg = <0x2903a00 0x100>; + reg = <0x0 0x2903a00 0x0 0x100>; sound-name-prefix = "ADX3"; status = "disabled"; }; @@ -581,100 +409,276 @@ tegra_adx4: adx@2903b00 { compatible = "nvidia,tegra194-adx", "nvidia,tegra210-adx"; - reg = <0x2903b00 0x100>; + reg = <0x0 0x2903b00 0x0 0x100>; sound-name-prefix = "ADX4"; status = "disabled"; }; + tegra_dmic1: dmic@2904000 { + compatible = "nvidia,tegra194-dmic", + "nvidia,tegra210-dmic"; + reg = <0x0 0x2904000 0x0 0x100>; + clocks = <&bpmp TEGRA194_CLK_DMIC1>; + clock-names = "dmic"; + assigned-clocks = <&bpmp TEGRA194_CLK_DMIC1>; + assigned-clock-parents = <&bpmp TEGRA194_CLK_PLLA_OUT0>; + assigned-clock-rates = <3072000>; + sound-name-prefix = "DMIC1"; + status = "disabled"; + }; + + tegra_dmic2: dmic@2904100 { + compatible = "nvidia,tegra194-dmic", + "nvidia,tegra210-dmic"; + reg = <0x0 0x2904100 0x0 0x100>; + clocks = <&bpmp TEGRA194_CLK_DMIC2>; + clock-names = "dmic"; + assigned-clocks = <&bpmp TEGRA194_CLK_DMIC2>; + assigned-clock-parents = <&bpmp TEGRA194_CLK_PLLA_OUT0>; + assigned-clock-rates = <3072000>; + sound-name-prefix = "DMIC2"; + status = "disabled"; + }; + + tegra_dmic3: dmic@2904200 { + compatible = "nvidia,tegra194-dmic", + "nvidia,tegra210-dmic"; + reg = <0x0 0x2904200 0x0 0x100>; + clocks = <&bpmp TEGRA194_CLK_DMIC3>; + clock-names = "dmic"; + assigned-clocks = <&bpmp TEGRA194_CLK_DMIC3>; + assigned-clock-parents = <&bpmp TEGRA194_CLK_PLLA_OUT0>; + assigned-clock-rates = <3072000>; + sound-name-prefix = "DMIC3"; + status = "disabled"; + }; + + tegra_dmic4: dmic@2904300 { + compatible = "nvidia,tegra194-dmic", + "nvidia,tegra210-dmic"; + reg = <0x0 0x2904300 0x0 0x100>; + clocks = <&bpmp TEGRA194_CLK_DMIC4>; + clock-names = "dmic"; + assigned-clocks = <&bpmp TEGRA194_CLK_DMIC4>; + assigned-clock-parents = <&bpmp TEGRA194_CLK_PLLA_OUT0>; + assigned-clock-rates = <3072000>; + sound-name-prefix = "DMIC4"; + status = "disabled"; + }; + + tegra_dspk1: dspk@2905000 { + compatible = "nvidia,tegra194-dspk", + "nvidia,tegra186-dspk"; + reg = <0x0 0x2905000 0x0 0x100>; + clocks = <&bpmp TEGRA194_CLK_DSPK1>; + clock-names = "dspk"; + assigned-clocks = <&bpmp TEGRA194_CLK_DSPK1>; + assigned-clock-parents = <&bpmp TEGRA194_CLK_PLLA_OUT0>; + assigned-clock-rates = <12288000>; + sound-name-prefix = "DSPK1"; + status = "disabled"; + }; + + tegra_dspk2: dspk@2905100 { + compatible = "nvidia,tegra194-dspk", + "nvidia,tegra186-dspk"; + reg = <0x0 0x2905100 0x0 0x100>; + clocks = <&bpmp TEGRA194_CLK_DSPK2>; + clock-names = "dspk"; + assigned-clocks = <&bpmp TEGRA194_CLK_DSPK2>; + assigned-clock-parents = <&bpmp TEGRA194_CLK_PLLA_OUT0>; + assigned-clock-rates = <12288000>; + sound-name-prefix = "DSPK2"; + status = "disabled"; + }; + tegra_ope1: processing-engine@2908000 { compatible = "nvidia,tegra194-ope", "nvidia,tegra210-ope"; - reg = <0x2908000 0x100>; - #address-cells = <1>; - #size-cells = <1>; - ranges; + reg = <0x0 0x2908000 0x0 0x100>; sound-name-prefix = "OPE1"; status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + equalizer@2908100 { compatible = "nvidia,tegra194-peq", "nvidia,tegra210-peq"; - reg = <0x2908100 0x100>; + reg = <0x0 0x2908100 0x0 0x100>; }; dynamic-range-compressor@2908200 { compatible = "nvidia,tegra194-mbdrc", "nvidia,tegra210-mbdrc"; - reg = <0x2908200 0x200>; + reg = <0x0 0x2908200 0x0 0x200>; }; }; + tegra_mvc1: mvc@290a000 { + compatible = "nvidia,tegra194-mvc", + "nvidia,tegra210-mvc"; + reg = <0x0 0x290a000 0x0 0x200>; + sound-name-prefix = "MVC1"; + status = "disabled"; + }; + + tegra_mvc2: mvc@290a200 { + compatible = "nvidia,tegra194-mvc", + "nvidia,tegra210-mvc"; + reg = <0x0 0x290a200 0x0 0x200>; + sound-name-prefix = "MVC2"; + status = "disabled"; + }; + tegra_amixer: amixer@290bb00 { compatible = "nvidia,tegra194-amixer", "nvidia,tegra210-amixer"; - reg = <0x290bb00 0x800>; + reg = <0x0 0x290bb00 0x0 0x800>; sound-name-prefix = "MIXER1"; status = "disabled"; }; + tegra_admaif: admaif@290f000 { + compatible = "nvidia,tegra194-admaif", + "nvidia,tegra186-admaif"; + reg = <0x0 0x0290f000 0x0 0x1000>; + dmas = <&adma 1>, <&adma 1>, + <&adma 2>, <&adma 2>, + <&adma 3>, <&adma 3>, + <&adma 4>, <&adma 4>, + <&adma 5>, <&adma 5>, + <&adma 6>, <&adma 6>, + <&adma 7>, <&adma 7>, + <&adma 8>, <&adma 8>, + <&adma 9>, <&adma 9>, + <&adma 10>, <&adma 10>, + <&adma 11>, <&adma 11>, + <&adma 12>, <&adma 12>, + <&adma 13>, <&adma 13>, + <&adma 14>, <&adma 14>, + <&adma 15>, <&adma 15>, + <&adma 16>, <&adma 16>, + <&adma 17>, <&adma 17>, + <&adma 18>, <&adma 18>, + <&adma 19>, <&adma 19>, + <&adma 20>, <&adma 20>; + dma-names = "rx1", "tx1", + "rx2", "tx2", + "rx3", "tx3", + "rx4", "tx4", + "rx5", "tx5", + "rx6", "tx6", + "rx7", "tx7", + "rx8", "tx8", + "rx9", "tx9", + "rx10", "tx10", + "rx11", "tx11", + "rx12", "tx12", + "rx13", "tx13", + "rx14", "tx14", + "rx15", "tx15", + "rx16", "tx16", + "rx17", "tx17", + "rx18", "tx18", + "rx19", "tx19", + "rx20", "tx20"; + status = "disabled"; + interconnects = <&mc TEGRA194_MEMORY_CLIENT_APEDMAR &emc>, + <&mc TEGRA194_MEMORY_CLIENT_APEDMAW &emc>; + interconnect-names = "dma-mem", "write"; + iommus = <&smmu TEGRA194_SID_APE>; + }; + tegra_asrc: asrc@2910000 { compatible = "nvidia,tegra194-asrc", "nvidia,tegra186-asrc"; - reg = <0x2910000 0x2000>; + reg = <0x0 0x2910000 0x0 0x2000>; sound-name-prefix = "ASRC1"; status = "disabled"; }; }; - }; - pinmux: pinmux@2430000 { - compatible = "nvidia,tegra194-pinmux"; - reg = <0x2430000 0x17000>; - status = "okay"; - - pex_rst_c5_out_state: pinmux-pex-rst-c5-out { - pex_rst { - nvidia,pins = "pex_l5_rst_n_pgg1"; - nvidia,schmitt = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_DISABLE>; - nvidia,io-hv = <TEGRA_PIN_ENABLE>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,pull = <TEGRA_PIN_PULL_NONE>; - }; + adma: dma-controller@2930000 { + compatible = "nvidia,tegra194-adma", + "nvidia,tegra186-adma"; + reg = <0x0 0x02930000 0x0 0x20000>; + interrupt-parent = <&agic>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + clocks = <&bpmp TEGRA194_CLK_AHUB>; + clock-names = "d_audio"; + status = "disabled"; }; - clkreq_c5_bi_dir_state: pinmux-clkreq-c5-bi-dir { - clkreq { - nvidia,pins = "pex_l5_clkreq_n_pgg0"; - nvidia,schmitt = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_ENABLE>; - nvidia,io-hv = <TEGRA_PIN_ENABLE>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,pull = <TEGRA_PIN_PULL_NONE>; - }; + agic: interrupt-controller@2a40000 { + compatible = "nvidia,tegra194-agic", + "nvidia,tegra210-agic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x0 0x02a41000 0x0 0x1000>, + <0x0 0x02a42000 0x0 0x2000>; + interrupts = <GIC_SPI 145 + (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&bpmp TEGRA194_CLK_APE>; + clock-names = "clk"; + status = "disabled"; }; }; mc: memory-controller@2c00000 { compatible = "nvidia,tegra194-mc"; - reg = <0x02c00000 0x10000>, /* MC-SID */ - <0x02c10000 0x10000>, /* MC Broadcast*/ - <0x02c20000 0x10000>, /* MC0 */ - <0x02c30000 0x10000>, /* MC1 */ - <0x02c40000 0x10000>, /* MC2 */ - <0x02c50000 0x10000>, /* MC3 */ - <0x02b80000 0x10000>, /* MC4 */ - <0x02b90000 0x10000>, /* MC5 */ - <0x02ba0000 0x10000>, /* MC6 */ - <0x02bb0000 0x10000>, /* MC7 */ - <0x01700000 0x10000>, /* MC8 */ - <0x01710000 0x10000>, /* MC9 */ - <0x01720000 0x10000>, /* MC10 */ - <0x01730000 0x10000>, /* MC11 */ - <0x01740000 0x10000>, /* MC12 */ - <0x01750000 0x10000>, /* MC13 */ - <0x01760000 0x10000>, /* MC14 */ - <0x01770000 0x10000>; /* MC15 */ + reg = <0x0 0x02c00000 0x0 0x10000>, /* MC-SID */ + <0x0 0x02c10000 0x0 0x10000>, /* MC Broadcast*/ + <0x0 0x02c20000 0x0 0x10000>, /* MC0 */ + <0x0 0x02c30000 0x0 0x10000>, /* MC1 */ + <0x0 0x02c40000 0x0 0x10000>, /* MC2 */ + <0x0 0x02c50000 0x0 0x10000>, /* MC3 */ + <0x0 0x02b80000 0x0 0x10000>, /* MC4 */ + <0x0 0x02b90000 0x0 0x10000>, /* MC5 */ + <0x0 0x02ba0000 0x0 0x10000>, /* MC6 */ + <0x0 0x02bb0000 0x0 0x10000>, /* MC7 */ + <0x0 0x01700000 0x0 0x10000>, /* MC8 */ + <0x0 0x01710000 0x0 0x10000>, /* MC9 */ + <0x0 0x01720000 0x0 0x10000>, /* MC10 */ + <0x0 0x01730000 0x0 0x10000>, /* MC11 */ + <0x0 0x01740000 0x0 0x10000>, /* MC12 */ + <0x0 0x01750000 0x0 0x10000>, /* MC13 */ + <0x0 0x01760000 0x0 0x10000>, /* MC14 */ + <0x0 0x01770000 0x0 0x10000>; /* MC15 */ reg-names = "sid", "broadcast", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", "ch8", "ch9", "ch10", "ch11", "ch12", "ch13", "ch14", "ch15"; @@ -684,10 +688,9 @@ #address-cells = <2>; #size-cells = <2>; - - ranges = <0x01700000 0x0 0x01700000 0x0 0x100000>, - <0x02b80000 0x0 0x02b80000 0x0 0x040000>, - <0x02c00000 0x0 0x02c00000 0x0 0x100000>; + ranges = <0x0 0x01700000 0x0 0x01700000 0x0 0x100000>, + <0x0 0x02b80000 0x0 0x02b80000 0x0 0x040000>, + <0x0 0x02c00000 0x0 0x02c00000 0x0 0x100000>; /* * Bit 39 of addresses passing through the memory @@ -704,7 +707,7 @@ * * Limit the DMA range for memory clients to [38:0]. */ - dma-ranges = <0x0 0x0 0x0 0x80 0x0>; + dma-ranges = <0x0 0x0 0x0 0x0 0x80 0x0>; emc: external-memory-controller@2c60000 { compatible = "nvidia,tegra194-emc"; @@ -722,7 +725,7 @@ timer@3010000 { compatible = "nvidia,tegra186-timer"; - reg = <0x03010000 0x000e0000>; + reg = <0x0 0x03010000 0x0 0x000e0000>; interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, @@ -738,7 +741,7 @@ uarta: serial@3100000 { compatible = "nvidia,tegra194-uart", "nvidia,tegra20-uart"; - reg = <0x03100000 0x40>; + reg = <0x0 0x03100000 0x0 0x40>; reg-shift = <2>; interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA194_CLK_UARTA>; @@ -750,7 +753,7 @@ uartb: serial@3110000 { compatible = "nvidia,tegra194-uart", "nvidia,tegra20-uart"; - reg = <0x03110000 0x40>; + reg = <0x0 0x03110000 0x0 0x40>; reg-shift = <2>; interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA194_CLK_UARTB>; @@ -762,7 +765,7 @@ uartd: serial@3130000 { compatible = "nvidia,tegra194-uart", "nvidia,tegra20-uart"; - reg = <0x03130000 0x40>; + reg = <0x0 0x03130000 0x0 0x40>; reg-shift = <2>; interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA194_CLK_UARTD>; @@ -774,7 +777,7 @@ uarte: serial@3140000 { compatible = "nvidia,tegra194-uart", "nvidia,tegra20-uart"; - reg = <0x03140000 0x40>; + reg = <0x0 0x03140000 0x0 0x40>; reg-shift = <2>; interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA194_CLK_UARTE>; @@ -786,7 +789,7 @@ uartf: serial@3150000 { compatible = "nvidia,tegra194-uart", "nvidia,tegra20-uart"; - reg = <0x03150000 0x40>; + reg = <0x0 0x03150000 0x0 0x40>; reg-shift = <2>; interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA194_CLK_UARTF>; @@ -798,7 +801,7 @@ gen1_i2c: i2c@3160000 { compatible = "nvidia,tegra194-i2c"; - reg = <0x03160000 0x10000>; + reg = <0x0 0x03160000 0x0 0x10000>; interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -806,8 +809,6 @@ clock-names = "div-clk"; resets = <&bpmp TEGRA194_RESET_I2C1>; reset-names = "i2c"; - iommus = <&smmu TEGRA194_SID_GPCDMA_0>; - dma-coherent; dmas = <&gpcdma 21>, <&gpcdma 21>; dma-names = "rx", "tx"; status = "disabled"; @@ -815,7 +816,7 @@ uarth: serial@3170000 { compatible = "nvidia,tegra194-uart", "nvidia,tegra20-uart"; - reg = <0x03170000 0x40>; + reg = <0x0 0x03170000 0x0 0x40>; reg-shift = <2>; interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA194_CLK_UARTH>; @@ -827,7 +828,7 @@ cam_i2c: i2c@3180000 { compatible = "nvidia,tegra194-i2c"; - reg = <0x03180000 0x10000>; + reg = <0x0 0x03180000 0x0 0x10000>; interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -835,8 +836,6 @@ clock-names = "div-clk"; resets = <&bpmp TEGRA194_RESET_I2C3>; reset-names = "i2c"; - iommus = <&smmu TEGRA194_SID_GPCDMA_0>; - dma-coherent; dmas = <&gpcdma 23>, <&gpcdma 23>; dma-names = "rx", "tx"; status = "disabled"; @@ -845,7 +844,7 @@ /* shares pads with dpaux1 */ dp_aux_ch1_i2c: i2c@3190000 { compatible = "nvidia,tegra194-i2c"; - reg = <0x03190000 0x10000>; + reg = <0x0 0x03190000 0x0 0x10000>; interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -856,8 +855,6 @@ pinctrl-0 = <&state_dpaux1_i2c>; pinctrl-1 = <&state_dpaux1_off>; pinctrl-names = "default", "idle"; - iommus = <&smmu TEGRA194_SID_GPCDMA_0>; - dma-coherent; dmas = <&gpcdma 26>, <&gpcdma 26>; dma-names = "rx", "tx"; status = "disabled"; @@ -866,7 +863,7 @@ /* shares pads with dpaux0 */ dp_aux_ch0_i2c: i2c@31b0000 { compatible = "nvidia,tegra194-i2c"; - reg = <0x031b0000 0x10000>; + reg = <0x0 0x031b0000 0x0 0x10000>; interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -877,8 +874,6 @@ pinctrl-0 = <&state_dpaux0_i2c>; pinctrl-1 = <&state_dpaux0_off>; pinctrl-names = "default", "idle"; - iommus = <&smmu TEGRA194_SID_GPCDMA_0>; - dma-coherent; dmas = <&gpcdma 30>, <&gpcdma 30>; dma-names = "rx", "tx"; status = "disabled"; @@ -887,7 +882,7 @@ /* shares pads with dpaux2 */ dp_aux_ch2_i2c: i2c@31c0000 { compatible = "nvidia,tegra194-i2c"; - reg = <0x031c0000 0x10000>; + reg = <0x0 0x031c0000 0x0 0x10000>; interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -898,8 +893,6 @@ pinctrl-0 = <&state_dpaux2_i2c>; pinctrl-1 = <&state_dpaux2_off>; pinctrl-names = "default", "idle"; - iommus = <&smmu TEGRA194_SID_GPCDMA_0>; - dma-coherent; dmas = <&gpcdma 27>, <&gpcdma 27>; dma-names = "rx", "tx"; status = "disabled"; @@ -908,7 +901,7 @@ /* shares pads with dpaux3 */ dp_aux_ch3_i2c: i2c@31e0000 { compatible = "nvidia,tegra194-i2c"; - reg = <0x031e0000 0x10000>; + reg = <0x0 0x031e0000 0x0 0x10000>; interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -919,8 +912,6 @@ pinctrl-0 = <&state_dpaux3_i2c>; pinctrl-1 = <&state_dpaux3_off>; pinctrl-names = "default", "idle"; - iommus = <&smmu TEGRA194_SID_GPCDMA_0>; - dma-coherent; dmas = <&gpcdma 31>, <&gpcdma 31>; dma-names = "rx", "tx"; status = "disabled"; @@ -928,7 +919,7 @@ spi@3270000 { compatible = "nvidia,tegra194-qspi"; - reg = <0x3270000 0x1000>; + reg = <0x0 0x3270000 0x0 0x1000>; interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -939,23 +930,10 @@ status = "disabled"; }; - spi@3300000 { - compatible = "nvidia,tegra194-qspi"; - reg = <0x3300000 0x1000>; - interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&bpmp TEGRA194_CLK_QSPI1>, - <&bpmp TEGRA194_CLK_QSPI1_PM>; - clock-names = "qspi", "qspi_out"; - resets = <&bpmp TEGRA194_RESET_QSPI1>; - status = "disabled"; - }; - pwm1: pwm@3280000 { compatible = "nvidia,tegra194-pwm", "nvidia,tegra186-pwm"; - reg = <0x3280000 0x10000>; + reg = <0x0 0x3280000 0x0 0x10000>; clocks = <&bpmp TEGRA194_CLK_PWM1>; resets = <&bpmp TEGRA194_RESET_PWM1>; reset-names = "pwm"; @@ -966,7 +944,7 @@ pwm2: pwm@3290000 { compatible = "nvidia,tegra194-pwm", "nvidia,tegra186-pwm"; - reg = <0x3290000 0x10000>; + reg = <0x0 0x3290000 0x0 0x10000>; clocks = <&bpmp TEGRA194_CLK_PWM2>; resets = <&bpmp TEGRA194_RESET_PWM2>; reset-names = "pwm"; @@ -977,7 +955,7 @@ pwm3: pwm@32a0000 { compatible = "nvidia,tegra194-pwm", "nvidia,tegra186-pwm"; - reg = <0x32a0000 0x10000>; + reg = <0x0 0x32a0000 0x0 0x10000>; clocks = <&bpmp TEGRA194_CLK_PWM3>; resets = <&bpmp TEGRA194_RESET_PWM3>; reset-names = "pwm"; @@ -988,7 +966,7 @@ pwm5: pwm@32c0000 { compatible = "nvidia,tegra194-pwm", "nvidia,tegra186-pwm"; - reg = <0x32c0000 0x10000>; + reg = <0x0 0x32c0000 0x0 0x10000>; clocks = <&bpmp TEGRA194_CLK_PWM5>; resets = <&bpmp TEGRA194_RESET_PWM5>; reset-names = "pwm"; @@ -999,7 +977,7 @@ pwm6: pwm@32d0000 { compatible = "nvidia,tegra194-pwm", "nvidia,tegra186-pwm"; - reg = <0x32d0000 0x10000>; + reg = <0x0 0x32d0000 0x0 0x10000>; clocks = <&bpmp TEGRA194_CLK_PWM6>; resets = <&bpmp TEGRA194_RESET_PWM6>; reset-names = "pwm"; @@ -1010,7 +988,7 @@ pwm7: pwm@32e0000 { compatible = "nvidia,tegra194-pwm", "nvidia,tegra186-pwm"; - reg = <0x32e0000 0x10000>; + reg = <0x0 0x32e0000 0x0 0x10000>; clocks = <&bpmp TEGRA194_CLK_PWM7>; resets = <&bpmp TEGRA194_RESET_PWM7>; reset-names = "pwm"; @@ -1021,7 +999,7 @@ pwm8: pwm@32f0000 { compatible = "nvidia,tegra194-pwm", "nvidia,tegra186-pwm"; - reg = <0x32f0000 0x10000>; + reg = <0x0 0x32f0000 0x0 0x10000>; clocks = <&bpmp TEGRA194_CLK_PWM8>; resets = <&bpmp TEGRA194_RESET_PWM8>; reset-names = "pwm"; @@ -1029,9 +1007,22 @@ #pwm-cells = <2>; }; + spi@3300000 { + compatible = "nvidia,tegra194-qspi"; + reg = <0x0 0x3300000 0x0 0x1000>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&bpmp TEGRA194_CLK_QSPI1>, + <&bpmp TEGRA194_CLK_QSPI1_PM>; + clock-names = "qspi", "qspi_out"; + resets = <&bpmp TEGRA194_RESET_QSPI1>; + status = "disabled"; + }; + sdmmc1: mmc@3400000 { compatible = "nvidia,tegra194-sdhci"; - reg = <0x03400000 0x10000>; + reg = <0x0 0x03400000 0x0 0x10000>; interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA194_CLK_SDMMC1>, <&bpmp TEGRA194_CLK_SDMMC_LEGACY_TM>; @@ -1070,7 +1061,7 @@ sdmmc3: mmc@3440000 { compatible = "nvidia,tegra194-sdhci"; - reg = <0x03440000 0x10000>; + reg = <0x0 0x03440000 0x0 0x10000>; interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA194_CLK_SDMMC3>, <&bpmp TEGRA194_CLK_SDMMC_LEGACY_TM>; @@ -1110,7 +1101,7 @@ sdmmc4: mmc@3460000 { compatible = "nvidia,tegra194-sdhci"; - reg = <0x03460000 0x10000>; + reg = <0x0 0x03460000 0x0 0x10000>; interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA194_CLK_SDMMC4>, <&bpmp TEGRA194_CLK_SDMMC_LEGACY_TM>; @@ -1147,7 +1138,7 @@ hda@3510000 { compatible = "nvidia,tegra194-hda"; - reg = <0x3510000 0x10000>; + reg = <0x0 0x3510000 0x0 0x10000>; interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA194_CLK_HDA>, <&bpmp TEGRA194_CLK_HDA2HDMICODEC>, @@ -1166,8 +1157,8 @@ xusb_padctl: padctl@3520000 { compatible = "nvidia,tegra194-xusb-padctl"; - reg = <0x03520000 0x1000>, - <0x03540000 0x1000>; + reg = <0x0 0x03520000 0x0 0x1000>, + <0x0 0x03540000 0x0 0x1000>; reg-names = "padctl", "ao"; interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; @@ -1274,8 +1265,8 @@ usb@3550000 { compatible = "nvidia,tegra194-xudc"; - reg = <0x03550000 0x8000>, - <0x03558000 0x1000>; + reg = <0x0 0x03550000 0x0 0x8000>, + <0x0 0x03558000 0x0 0x1000>; reg-names = "base", "fpci"; interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA194_CLK_XUSB_CORE_DEV>, @@ -1291,13 +1282,14 @@ <&bpmp TEGRA194_POWER_DOMAIN_XUSBA>; power-domain-names = "dev", "ss"; nvidia,xusb-padctl = <&xusb_padctl>; + dma-coherent; status = "disabled"; }; usb@3610000 { compatible = "nvidia,tegra194-xusb"; - reg = <0x03610000 0x40000>, - <0x03600000 0x10000>; + reg = <0x0 0x03610000 0x0 0x40000>, + <0x0 0x03600000 0x0 0x10000>; reg-names = "hcd", "fpci"; interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, @@ -1331,7 +1323,7 @@ fuse@3820000 { compatible = "nvidia,tegra194-efuse"; - reg = <0x03820000 0x10000>; + reg = <0x0 0x03820000 0x0 0x10000>; clocks = <&bpmp TEGRA194_CLK_FUSE>; clock-names = "fuse"; }; @@ -1340,10 +1332,10 @@ compatible = "arm,gic-400"; #interrupt-cells = <3>; interrupt-controller; - reg = <0x03881000 0x1000>, - <0x03882000 0x2000>, - <0x03884000 0x2000>, - <0x03886000 0x2000>; + reg = <0x0 0x03881000 0x0 0x1000>, + <0x0 0x03882000 0x0 0x2000>, + <0x0 0x03884000 0x0 0x2000>, + <0x0 0x03886000 0x0 0x2000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; interrupt-parent = <&gic>; @@ -1351,7 +1343,7 @@ cec@3960000 { compatible = "nvidia,tegra194-cec"; - reg = <0x03960000 0x10000>; + reg = <0x0 0x03960000 0x0 0x10000>; interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA194_CLK_CEC>; clock-names = "cec"; @@ -1360,7 +1352,7 @@ hte_lic: hardware-timestamp@3aa0000 { compatible = "nvidia,tegra194-gte-lic"; - reg = <0x3aa0000 0x10000>; + reg = <0x0 0x3aa0000 0x0 0x10000>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; nvidia,int-threshold = <1>; nvidia,slices = <11>; @@ -1370,7 +1362,7 @@ hsp_top0: hsp@3c00000 { compatible = "nvidia,tegra194-hsp"; - reg = <0x03c00000 0xa0000>; + reg = <0x0 0x03c00000 0x0 0xa0000>; interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, @@ -1388,7 +1380,7 @@ p2u_hsio_0: phy@3e10000 { compatible = "nvidia,tegra194-p2u"; - reg = <0x03e10000 0x10000>; + reg = <0x0 0x03e10000 0x0 0x10000>; reg-names = "ctl"; #phy-cells = <0>; @@ -1396,7 +1388,7 @@ p2u_hsio_1: phy@3e20000 { compatible = "nvidia,tegra194-p2u"; - reg = <0x03e20000 0x10000>; + reg = <0x0 0x03e20000 0x0 0x10000>; reg-names = "ctl"; #phy-cells = <0>; @@ -1404,7 +1396,7 @@ p2u_hsio_2: phy@3e30000 { compatible = "nvidia,tegra194-p2u"; - reg = <0x03e30000 0x10000>; + reg = <0x0 0x03e30000 0x0 0x10000>; reg-names = "ctl"; #phy-cells = <0>; @@ -1412,7 +1404,7 @@ p2u_hsio_3: phy@3e40000 { compatible = "nvidia,tegra194-p2u"; - reg = <0x03e40000 0x10000>; + reg = <0x0 0x03e40000 0x0 0x10000>; reg-names = "ctl"; #phy-cells = <0>; @@ -1420,7 +1412,7 @@ p2u_hsio_4: phy@3e50000 { compatible = "nvidia,tegra194-p2u"; - reg = <0x03e50000 0x10000>; + reg = <0x0 0x03e50000 0x0 0x10000>; reg-names = "ctl"; #phy-cells = <0>; @@ -1428,7 +1420,7 @@ p2u_hsio_5: phy@3e60000 { compatible = "nvidia,tegra194-p2u"; - reg = <0x03e60000 0x10000>; + reg = <0x0 0x03e60000 0x0 0x10000>; reg-names = "ctl"; #phy-cells = <0>; @@ -1436,7 +1428,7 @@ p2u_hsio_6: phy@3e70000 { compatible = "nvidia,tegra194-p2u"; - reg = <0x03e70000 0x10000>; + reg = <0x0 0x03e70000 0x0 0x10000>; reg-names = "ctl"; #phy-cells = <0>; @@ -1444,7 +1436,7 @@ p2u_hsio_7: phy@3e80000 { compatible = "nvidia,tegra194-p2u"; - reg = <0x03e80000 0x10000>; + reg = <0x0 0x03e80000 0x0 0x10000>; reg-names = "ctl"; #phy-cells = <0>; @@ -1452,7 +1444,7 @@ p2u_hsio_8: phy@3e90000 { compatible = "nvidia,tegra194-p2u"; - reg = <0x03e90000 0x10000>; + reg = <0x0 0x03e90000 0x0 0x10000>; reg-names = "ctl"; #phy-cells = <0>; @@ -1460,7 +1452,7 @@ p2u_hsio_9: phy@3ea0000 { compatible = "nvidia,tegra194-p2u"; - reg = <0x03ea0000 0x10000>; + reg = <0x0 0x03ea0000 0x0 0x10000>; reg-names = "ctl"; #phy-cells = <0>; @@ -1468,7 +1460,7 @@ p2u_nvhs_0: phy@3eb0000 { compatible = "nvidia,tegra194-p2u"; - reg = <0x03eb0000 0x10000>; + reg = <0x0 0x03eb0000 0x0 0x10000>; reg-names = "ctl"; #phy-cells = <0>; @@ -1476,7 +1468,7 @@ p2u_nvhs_1: phy@3ec0000 { compatible = "nvidia,tegra194-p2u"; - reg = <0x03ec0000 0x10000>; + reg = <0x0 0x03ec0000 0x0 0x10000>; reg-names = "ctl"; #phy-cells = <0>; @@ -1484,7 +1476,7 @@ p2u_nvhs_2: phy@3ed0000 { compatible = "nvidia,tegra194-p2u"; - reg = <0x03ed0000 0x10000>; + reg = <0x0 0x03ed0000 0x0 0x10000>; reg-names = "ctl"; #phy-cells = <0>; @@ -1492,7 +1484,7 @@ p2u_nvhs_3: phy@3ee0000 { compatible = "nvidia,tegra194-p2u"; - reg = <0x03ee0000 0x10000>; + reg = <0x0 0x03ee0000 0x0 0x10000>; reg-names = "ctl"; #phy-cells = <0>; @@ -1500,7 +1492,7 @@ p2u_nvhs_4: phy@3ef0000 { compatible = "nvidia,tegra194-p2u"; - reg = <0x03ef0000 0x10000>; + reg = <0x0 0x03ef0000 0x0 0x10000>; reg-names = "ctl"; #phy-cells = <0>; @@ -1508,7 +1500,7 @@ p2u_nvhs_5: phy@3f00000 { compatible = "nvidia,tegra194-p2u"; - reg = <0x03f00000 0x10000>; + reg = <0x0 0x03f00000 0x0 0x10000>; reg-names = "ctl"; #phy-cells = <0>; @@ -1516,7 +1508,7 @@ p2u_nvhs_6: phy@3f10000 { compatible = "nvidia,tegra194-p2u"; - reg = <0x03f10000 0x10000>; + reg = <0x0 0x03f10000 0x0 0x10000>; reg-names = "ctl"; #phy-cells = <0>; @@ -1524,7 +1516,7 @@ p2u_nvhs_7: phy@3f20000 { compatible = "nvidia,tegra194-p2u"; - reg = <0x03f20000 0x10000>; + reg = <0x0 0x03f20000 0x0 0x10000>; reg-names = "ctl"; #phy-cells = <0>; @@ -1532,7 +1524,7 @@ p2u_hsio_10: phy@3f30000 { compatible = "nvidia,tegra194-p2u"; - reg = <0x03f30000 0x10000>; + reg = <0x0 0x03f30000 0x0 0x10000>; reg-names = "ctl"; #phy-cells = <0>; @@ -1540,7 +1532,7 @@ p2u_hsio_11: phy@3f40000 { compatible = "nvidia,tegra194-p2u"; - reg = <0x03f40000 0x10000>; + reg = <0x0 0x03f40000 0x0 0x10000>; reg-names = "ctl"; #phy-cells = <0>; @@ -1548,7 +1540,7 @@ sce-noc@b600000 { compatible = "nvidia,tegra194-sce-noc"; - reg = <0xb600000 0x1000>; + reg = <0x0 0xb600000 0x0 0x1000>; interrupts = <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; nvidia,axi2apb = <&axi2apb>; @@ -1558,7 +1550,7 @@ rce-noc@be00000 { compatible = "nvidia,tegra194-rce-noc"; - reg = <0xbe00000 0x1000>; + reg = <0x0 0xbe00000 0x0 0x1000>; interrupts = <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; nvidia,axi2apb = <&axi2apb>; @@ -1568,7 +1560,7 @@ hsp_aon: hsp@c150000 { compatible = "nvidia,tegra194-hsp"; - reg = <0x0c150000 0x90000>; + reg = <0x0 0x0c150000 0x0 0x90000>; interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, @@ -1583,7 +1575,7 @@ hte_aon: hardware-timestamp@c1e0000 { compatible = "nvidia,tegra194-gte-aon"; - reg = <0xc1e0000 0x10000>; + reg = <0x0 0xc1e0000 0x0 0x10000>; interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; nvidia,int-threshold = <1>; nvidia,slices = <3>; @@ -1593,7 +1585,7 @@ gen2_i2c: i2c@c240000 { compatible = "nvidia,tegra194-i2c"; - reg = <0x0c240000 0x10000>; + reg = <0x0 0x0c240000 0x0 0x10000>; interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -1601,8 +1593,6 @@ clock-names = "div-clk"; resets = <&bpmp TEGRA194_RESET_I2C2>; reset-names = "i2c"; - iommus = <&smmu TEGRA194_SID_GPCDMA_0>; - dma-coherent; dmas = <&gpcdma 22>, <&gpcdma 22>; dma-names = "rx", "tx"; status = "disabled"; @@ -1610,7 +1600,7 @@ gen8_i2c: i2c@c250000 { compatible = "nvidia,tegra194-i2c"; - reg = <0x0c250000 0x10000>; + reg = <0x0 0x0c250000 0x0 0x10000>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -1618,8 +1608,6 @@ clock-names = "div-clk"; resets = <&bpmp TEGRA194_RESET_I2C8>; reset-names = "i2c"; - iommus = <&smmu TEGRA194_SID_GPCDMA_0>; - dma-coherent; dmas = <&gpcdma 0>, <&gpcdma 0>; dma-names = "rx", "tx"; status = "disabled"; @@ -1627,7 +1615,7 @@ uartc: serial@c280000 { compatible = "nvidia,tegra194-uart", "nvidia,tegra20-uart"; - reg = <0x0c280000 0x40>; + reg = <0x0 0x0c280000 0x0 0x40>; reg-shift = <2>; interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA194_CLK_UARTC>; @@ -1639,7 +1627,7 @@ uartg: serial@c290000 { compatible = "nvidia,tegra194-uart", "nvidia,tegra20-uart"; - reg = <0x0c290000 0x40>; + reg = <0x0 0x0c290000 0x0 0x40>; reg-shift = <2>; interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA194_CLK_UARTG>; @@ -1651,7 +1639,7 @@ rtc: rtc@c2a0000 { compatible = "nvidia,tegra194-rtc", "nvidia,tegra20-rtc"; - reg = <0x0c2a0000 0x10000>; + reg = <0x0 0x0c2a0000 0x0 0x10000>; interrupt-parent = <&pmc>; interrupts = <73 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA194_CLK_CLK_32K>; @@ -1662,8 +1650,8 @@ gpio_aon: gpio@c2f0000 { compatible = "nvidia,tegra194-gpio-aon"; reg-names = "security", "gpio"; - reg = <0xc2f0000 0x1000>, - <0xc2f1000 0x1000>; + reg = <0x0 0xc2f0000 0x0 0x1000>, + <0x0 0xc2f1000 0x0 0x1000>; interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, @@ -1672,12 +1660,12 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; - gpio-range = <&pinmux_aon 0 0 30>; + gpio-ranges = <&pinmux_aon 0 0 30>; }; pinmux_aon: pinmux@c300000 { compatible = "nvidia,tegra194-pinmux-aon"; - reg = <0xc300000 0x4000>; + reg = <0x0 0xc300000 0x0 0x4000>; status = "okay"; }; @@ -1685,7 +1673,7 @@ pwm4: pwm@c340000 { compatible = "nvidia,tegra194-pwm", "nvidia,tegra186-pwm"; - reg = <0xc340000 0x10000>; + reg = <0x0 0xc340000 0x0 0x10000>; clocks = <&bpmp TEGRA194_CLK_PWM4>; resets = <&bpmp TEGRA194_RESET_PWM4>; reset-names = "pwm"; @@ -1695,26 +1683,23 @@ pmc: pmc@c360000 { compatible = "nvidia,tegra194-pmc"; - reg = <0x0c360000 0x10000>, - <0x0c370000 0x10000>, - <0x0c380000 0x10000>, - <0x0c390000 0x10000>, - <0x0c3a0000 0x10000>; + reg = <0x0 0x0c360000 0x0 0x10000>, + <0x0 0x0c370000 0x0 0x10000>, + <0x0 0x0c380000 0x0 0x10000>, + <0x0 0x0c390000 0x0 0x10000>, + <0x0 0x0c3a0000 0x0 0x10000>; reg-names = "pmc", "wake", "aotag", "scratch", "misc"; #interrupt-cells = <2>; interrupt-controller; - sdmmc1_3v3: sdmmc1-3v3 { - pins = "sdmmc1-hv"; - power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>; - }; sdmmc1_1v8: sdmmc1-1v8 { pins = "sdmmc1-hv"; power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>; }; - sdmmc3_3v3: sdmmc3-3v3 { - pins = "sdmmc3-hv"; + + sdmmc1_3v3: sdmmc1-3v3 { + pins = "sdmmc1-hv"; power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>; }; @@ -1723,11 +1708,15 @@ power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>; }; + sdmmc3_3v3: sdmmc3-3v3 { + pins = "sdmmc3-hv"; + power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>; + }; }; aon-noc@c600000 { compatible = "nvidia,tegra194-aon-noc"; - reg = <0xc600000 0x1000>; + reg = <0x0 0xc600000 0x0 0x1000>; interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>; nvidia,apbmisc = <&apbmisc>; @@ -1736,7 +1725,7 @@ bpmp-noc@d600000 { compatible = "nvidia,tegra194-bpmp-noc"; - reg = <0xd600000 0x1000>; + reg = <0x0 0xd600000 0x0 0x1000>; interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; nvidia,axi2apb = <&axi2apb>; @@ -1746,7 +1735,7 @@ iommu@10000000 { compatible = "nvidia,tegra194-smmu", "nvidia,smmu-500"; - reg = <0x10000000 0x800000>; + reg = <0x0 0x10000000 0x0 0x800000>; interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, @@ -1822,8 +1811,8 @@ smmu: iommu@12000000 { compatible = "nvidia,tegra194-smmu", "nvidia,smmu-500"; - reg = <0x12000000 0x800000>, - <0x11000000 0x800000>; + reg = <0x0 0x12000000 0x0 0x800000>, + <0x0 0x11000000 0x0 0x800000>; interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, @@ -1900,8 +1889,8 @@ host1x@13e00000 { compatible = "nvidia,tegra194-host1x"; - reg = <0x13e00000 0x10000>, - <0x13e10000 0x10000>; + reg = <0x0 0x13e00000 0x0 0x10000>, + <0x0 0x13e10000 0x0 0x10000>; reg-names = "hypervisor", "vm"; interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>; @@ -1911,13 +1900,14 @@ resets = <&bpmp TEGRA194_RESET_HOST1X>; reset-names = "host1x"; - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x14800000 0x0 0x14800000 0x0 0x02800000>; - ranges = <0x14800000 0x14800000 0x02800000>; interconnects = <&mc TEGRA194_MEMORY_CLIENT_HOST1XDMAR &emc>; interconnect-names = "dma-mem"; iommus = <&smmu TEGRA194_SID_HOST1X>; + dma-coherent; /* Context isolation domains */ iommu-map = <0 &smmu TEGRA194_SID_HOST1X_CTX0 1>, @@ -1931,7 +1921,7 @@ nvdec@15140000 { compatible = "nvidia,tegra194-nvdec"; - reg = <0x15140000 0x00040000>; + reg = <0x0 0x15140000 0x0 0x00040000>; clocks = <&bpmp TEGRA194_CLK_NVDEC1>; clock-names = "nvdec"; resets = <&bpmp TEGRA194_RESET_NVDEC1>; @@ -1950,7 +1940,7 @@ display-hub@15200000 { compatible = "nvidia,tegra194-display"; - reg = <0x15200000 0x00040000>; + reg = <0x0 0x15200000 0x0 0x00040000>; resets = <&bpmp TEGRA194_RESET_NVDISPLAY0_MISC>, <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP0>, <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP1>, @@ -1967,14 +1957,13 @@ power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>; - #address-cells = <1>; - #size-cells = <1>; - - ranges = <0x15200000 0x15200000 0x40000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x15200000 0x0 0x15200000 0x0 0x40000>; display@15200000 { compatible = "nvidia,tegra194-dc"; - reg = <0x15200000 0x10000>; + reg = <0x0 0x15200000 0x0 0x10000>; interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA194_CLK_NVDISPLAY_P0>; clock-names = "dc"; @@ -1992,7 +1981,7 @@ display@15210000 { compatible = "nvidia,tegra194-dc"; - reg = <0x15210000 0x10000>; + reg = <0x0 0x15210000 0x0 0x10000>; interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA194_CLK_NVDISPLAY_P1>; clock-names = "dc"; @@ -2010,7 +1999,7 @@ display@15220000 { compatible = "nvidia,tegra194-dc"; - reg = <0x15220000 0x10000>; + reg = <0x0 0x15220000 0x0 0x10000>; interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA194_CLK_NVDISPLAY_P2>; clock-names = "dc"; @@ -2028,7 +2017,7 @@ display@15230000 { compatible = "nvidia,tegra194-dc"; - reg = <0x15230000 0x10000>; + reg = <0x0 0x15230000 0x0 0x10000>; interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA194_CLK_NVDISPLAY_P3>; clock-names = "dc"; @@ -2047,7 +2036,7 @@ vic@15340000 { compatible = "nvidia,tegra194-vic"; - reg = <0x15340000 0x00040000>; + reg = <0x0 0x15340000 0x0 0x00040000>; interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA194_CLK_VIC>; clock-names = "vic"; @@ -2064,7 +2053,7 @@ nvjpg@15380000 { compatible = "nvidia,tegra194-nvjpg"; - reg = <0x15380000 0x40000>; + reg = <0x0 0x15380000 0x0 0x40000>; clocks = <&bpmp TEGRA194_CLK_NVJPG>; clock-names = "nvjpg"; resets = <&bpmp TEGRA194_RESET_NVJPG>; @@ -2080,7 +2069,7 @@ nvdec@15480000 { compatible = "nvidia,tegra194-nvdec"; - reg = <0x15480000 0x00040000>; + reg = <0x0 0x15480000 0x0 0x00040000>; clocks = <&bpmp TEGRA194_CLK_NVDEC>; clock-names = "nvdec"; resets = <&bpmp TEGRA194_RESET_NVDEC>; @@ -2099,7 +2088,7 @@ nvenc@154c0000 { compatible = "nvidia,tegra194-nvenc"; - reg = <0x154c0000 0x40000>; + reg = <0x0 0x154c0000 0x0 0x40000>; clocks = <&bpmp TEGRA194_CLK_NVENC>; clock-names = "nvenc"; resets = <&bpmp TEGRA194_RESET_NVENC>; @@ -2118,7 +2107,7 @@ dpaux0: dpaux@155c0000 { compatible = "nvidia,tegra194-dpaux"; - reg = <0x155c0000 0x10000>; + reg = <0x0 0x155c0000 0x0 0x10000>; interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA194_CLK_DPAUX>, <&bpmp TEGRA194_CLK_PLLDP>; @@ -2152,7 +2141,7 @@ dpaux1: dpaux@155d0000 { compatible = "nvidia,tegra194-dpaux"; - reg = <0x155d0000 0x10000>; + reg = <0x0 0x155d0000 0x0 0x10000>; interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA194_CLK_DPAUX1>, <&bpmp TEGRA194_CLK_PLLDP>; @@ -2186,7 +2175,7 @@ dpaux2: dpaux@155e0000 { compatible = "nvidia,tegra194-dpaux"; - reg = <0x155e0000 0x10000>; + reg = <0x0 0x155e0000 0x0 0x10000>; interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA194_CLK_DPAUX2>, <&bpmp TEGRA194_CLK_PLLDP>; @@ -2220,7 +2209,7 @@ dpaux3: dpaux@155f0000 { compatible = "nvidia,tegra194-dpaux"; - reg = <0x155f0000 0x10000>; + reg = <0x0 0x155f0000 0x0 0x10000>; interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA194_CLK_DPAUX3>, <&bpmp TEGRA194_CLK_PLLDP>; @@ -2254,7 +2243,7 @@ nvenc@15a80000 { compatible = "nvidia,tegra194-nvenc"; - reg = <0x15a80000 0x00040000>; + reg = <0x0 0x15a80000 0x0 0x00040000>; clocks = <&bpmp TEGRA194_CLK_NVENC1>; clock-names = "nvenc"; resets = <&bpmp TEGRA194_RESET_NVENC1>; @@ -2273,7 +2262,7 @@ sor0: sor@15b00000 { compatible = "nvidia,tegra194-sor"; - reg = <0x15b00000 0x40000>; + reg = <0x0 0x15b00000 0x0 0x40000>; interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA194_CLK_SOR0_REF>, <&bpmp TEGRA194_CLK_SOR0_OUT>, @@ -2297,7 +2286,7 @@ sor1: sor@15b40000 { compatible = "nvidia,tegra194-sor"; - reg = <0x15b40000 0x40000>; + reg = <0x0 0x15b40000 0x0 0x40000>; interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA194_CLK_SOR1_REF>, <&bpmp TEGRA194_CLK_SOR1_OUT>, @@ -2321,7 +2310,7 @@ sor2: sor@15b80000 { compatible = "nvidia,tegra194-sor"; - reg = <0x15b80000 0x40000>; + reg = <0x0 0x15b80000 0x0 0x40000>; interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA194_CLK_SOR2_REF>, <&bpmp TEGRA194_CLK_SOR2_OUT>, @@ -2345,7 +2334,7 @@ sor3: sor@15bc0000 { compatible = "nvidia,tegra194-sor"; - reg = <0x15bc0000 0x40000>; + reg = <0x0 0x15bc0000 0x0 0x40000>; interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA194_CLK_SOR3_REF>, <&bpmp TEGRA194_CLK_SOR3_OUT>, @@ -2368,482 +2357,484 @@ }; }; - gpu@17000000 { - compatible = "nvidia,gv11b"; - reg = <0x17000000 0x1000000>, - <0x18000000 0x1000000>; - interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "stall", "nonstall"; - clocks = <&bpmp TEGRA194_CLK_GPCCLK>, - <&bpmp TEGRA194_CLK_GPU_PWR>, - <&bpmp TEGRA194_CLK_FUSE>; - clock-names = "gpu", "pwr", "fuse"; - resets = <&bpmp TEGRA194_RESET_GPU>; - reset-names = "gpu"; - dma-coherent; + pcie@14100000 { + compatible = "nvidia,tegra194-pcie"; + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX1A>; + reg = <0x00 0x14100000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x30000000 0x0 0x00040000>, /* configuration space (256K) */ + <0x00 0x30040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x30080000 0x0 0x00040000>; /* DBI reg space (256K) */ + reg-names = "appl", "config", "atu_dma", "dbi"; - power-domains = <&bpmp TEGRA194_POWER_DOMAIN_GPU>; - interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVL1R &emc>, - <&mc TEGRA194_MEMORY_CLIENT_NVL1RHP &emc>, - <&mc TEGRA194_MEMORY_CLIENT_NVL1W &emc>, - <&mc TEGRA194_MEMORY_CLIENT_NVL2R &emc>, - <&mc TEGRA194_MEMORY_CLIENT_NVL2RHP &emc>, - <&mc TEGRA194_MEMORY_CLIENT_NVL2W &emc>, - <&mc TEGRA194_MEMORY_CLIENT_NVL3R &emc>, - <&mc TEGRA194_MEMORY_CLIENT_NVL3RHP &emc>, - <&mc TEGRA194_MEMORY_CLIENT_NVL3W &emc>, - <&mc TEGRA194_MEMORY_CLIENT_NVL4R &emc>, - <&mc TEGRA194_MEMORY_CLIENT_NVL4RHP &emc>, - <&mc TEGRA194_MEMORY_CLIENT_NVL4W &emc>; - interconnect-names = "dma-mem", "read-0-hp", "write-0", - "read-1", "read-1-hp", "write-1", - "read-2", "read-2-hp", "write-2", - "read-3", "read-3-hp", "write-3"; - }; - }; + status = "disabled"; - pcie@14100000 { - compatible = "nvidia,tegra194-pcie"; - power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX1A>; - reg = <0x00 0x14100000 0x0 0x00020000>, /* appl registers (128K) */ - <0x00 0x30000000 0x0 0x00040000>, /* configuration space (256K) */ - <0x00 0x30040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ - <0x00 0x30080000 0x0 0x00040000>; /* DBI reg space (256K) */ - reg-names = "appl", "config", "atu_dma", "dbi"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <1>; + linux,pci-domain = <1>; - status = "disabled"; + clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_1>; + clock-names = "core"; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - num-lanes = <1>; - linux,pci-domain = <1>; + resets = <&bpmp TEGRA194_RESET_PEX0_CORE_1_APB>, + <&bpmp TEGRA194_RESET_PEX0_CORE_1>; + reset-names = "apb", "core"; - clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_1>; - clock-names = "core"; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; - resets = <&bpmp TEGRA194_RESET_PEX0_CORE_1_APB>, - <&bpmp TEGRA194_RESET_PEX0_CORE_1>; - reset-names = "apb", "core"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; - interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ - <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ - interrupt-names = "intr", "msi"; + nvidia,bpmp = <&bpmp 1>; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; - nvidia,bpmp = <&bpmp 1>; + bus-range = <0x0 0xff>; - nvidia,aspm-cmrt-us = <60>; - nvidia,aspm-pwr-on-t-us = <20>; - nvidia,aspm-l0s-entrance-latency-us = <3>; + ranges = <0x43000000 0x12 0x00000000 0x12 0x00000000 0x0 0x30000000>, /* prefetchable memory (768 MiB) */ + <0x02000000 0x0 0x40000000 0x12 0x30000000 0x0 0x0fff0000>, /* non-prefetchable memory (256 MiB - 64 KiB) */ + <0x01000000 0x0 0x00000000 0x12 0x3fff0000 0x0 0x00010000>; /* downstream I/O (64 KiB) */ - bus-range = <0x0 0xff>; + interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE1R &emc>, + <&mc TEGRA194_MEMORY_CLIENT_PCIE1W &emc>; + interconnect-names = "dma-mem", "write"; + iommu-map = <0x0 &smmu TEGRA194_SID_PCIE1 0x1000>; + iommu-map-mask = <0x0>; + dma-coherent; + }; - ranges = <0x43000000 0x12 0x00000000 0x12 0x00000000 0x0 0x30000000>, /* prefetchable memory (768 MiB) */ - <0x02000000 0x0 0x40000000 0x12 0x30000000 0x0 0x0fff0000>, /* non-prefetchable memory (256 MiB - 64 KiB) */ - <0x01000000 0x0 0x00000000 0x12 0x3fff0000 0x0 0x00010000>; /* downstream I/O (64 KiB) */ + pcie@14120000 { + compatible = "nvidia,tegra194-pcie"; + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX1A>; + reg = <0x00 0x14120000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x32000000 0x0 0x00040000>, /* configuration space (256K) */ + <0x00 0x32040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x32080000 0x0 0x00040000>; /* DBI reg space (256K) */ + reg-names = "appl", "config", "atu_dma", "dbi"; - interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE1R &emc>, - <&mc TEGRA194_MEMORY_CLIENT_PCIE1W &emc>; - interconnect-names = "dma-mem", "write"; - iommu-map = <0x0 &smmu TEGRA194_SID_PCIE1 0x1000>; - iommu-map-mask = <0x0>; - dma-coherent; - }; + status = "disabled"; - pcie@14120000 { - compatible = "nvidia,tegra194-pcie"; - power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX1A>; - reg = <0x00 0x14120000 0x0 0x00020000>, /* appl registers (128K) */ - <0x00 0x32000000 0x0 0x00040000>, /* configuration space (256K) */ - <0x00 0x32040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ - <0x00 0x32080000 0x0 0x00040000>; /* DBI reg space (256K) */ - reg-names = "appl", "config", "atu_dma", "dbi"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <1>; + linux,pci-domain = <2>; - status = "disabled"; + clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_2>; + clock-names = "core"; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - num-lanes = <1>; - linux,pci-domain = <2>; + resets = <&bpmp TEGRA194_RESET_PEX0_CORE_2_APB>, + <&bpmp TEGRA194_RESET_PEX0_CORE_2>; + reset-names = "apb", "core"; - clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_2>; - clock-names = "core"; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; - resets = <&bpmp TEGRA194_RESET_PEX0_CORE_2_APB>, - <&bpmp TEGRA194_RESET_PEX0_CORE_2>; - reset-names = "apb", "core"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; - interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ - <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ - interrupt-names = "intr", "msi"; + nvidia,bpmp = <&bpmp 2>; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; - nvidia,bpmp = <&bpmp 2>; + bus-range = <0x0 0xff>; - nvidia,aspm-cmrt-us = <60>; - nvidia,aspm-pwr-on-t-us = <20>; - nvidia,aspm-l0s-entrance-latency-us = <3>; + ranges = <0x43000000 0x12 0x40000000 0x12 0x40000000 0x0 0x30000000>, /* prefetchable memory (768 MiB) */ + <0x02000000 0x0 0x40000000 0x12 0x70000000 0x0 0x0fff0000>, /* non-prefetchable memory (256 MiB - 64 KiB) */ + <0x01000000 0x0 0x00000000 0x12 0x7fff0000 0x0 0x00010000>; /* downstream I/O (64 KiB) */ - bus-range = <0x0 0xff>; + interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE2AR &emc>, + <&mc TEGRA194_MEMORY_CLIENT_PCIE2AW &emc>; + interconnect-names = "dma-mem", "write"; + iommu-map = <0x0 &smmu TEGRA194_SID_PCIE2 0x1000>; + iommu-map-mask = <0x0>; + dma-coherent; + }; - ranges = <0x43000000 0x12 0x40000000 0x12 0x40000000 0x0 0x30000000>, /* prefetchable memory (768 MiB) */ - <0x02000000 0x0 0x40000000 0x12 0x70000000 0x0 0x0fff0000>, /* non-prefetchable memory (256 MiB - 64 KiB) */ - <0x01000000 0x0 0x00000000 0x12 0x7fff0000 0x0 0x00010000>; /* downstream I/O (64 KiB) */ + pcie@14140000 { + compatible = "nvidia,tegra194-pcie"; + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX1A>; + reg = <0x00 0x14140000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x34000000 0x0 0x00040000>, /* configuration space (256K) */ + <0x00 0x34040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x34080000 0x0 0x00040000>; /* DBI reg space (256K) */ + reg-names = "appl", "config", "atu_dma", "dbi"; - interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE2AR &emc>, - <&mc TEGRA194_MEMORY_CLIENT_PCIE2AW &emc>; - interconnect-names = "dma-mem", "write"; - iommu-map = <0x0 &smmu TEGRA194_SID_PCIE2 0x1000>; - iommu-map-mask = <0x0>; - dma-coherent; - }; + status = "disabled"; - pcie@14140000 { - compatible = "nvidia,tegra194-pcie"; - power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX1A>; - reg = <0x00 0x14140000 0x0 0x00020000>, /* appl registers (128K) */ - <0x00 0x34000000 0x0 0x00040000>, /* configuration space (256K) */ - <0x00 0x34040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ - <0x00 0x34080000 0x0 0x00040000>; /* DBI reg space (256K) */ - reg-names = "appl", "config", "atu_dma", "dbi"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <1>; + linux,pci-domain = <3>; - status = "disabled"; + clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_3>; + clock-names = "core"; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - num-lanes = <1>; - linux,pci-domain = <3>; + resets = <&bpmp TEGRA194_RESET_PEX0_CORE_3_APB>, + <&bpmp TEGRA194_RESET_PEX0_CORE_3>; + reset-names = "apb", "core"; - clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_3>; - clock-names = "core"; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; - resets = <&bpmp TEGRA194_RESET_PEX0_CORE_3_APB>, - <&bpmp TEGRA194_RESET_PEX0_CORE_3>; - reset-names = "apb", "core"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; - interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ - <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ - interrupt-names = "intr", "msi"; + nvidia,bpmp = <&bpmp 3>; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; - nvidia,bpmp = <&bpmp 3>; + bus-range = <0x0 0xff>; - nvidia,aspm-cmrt-us = <60>; - nvidia,aspm-pwr-on-t-us = <20>; - nvidia,aspm-l0s-entrance-latency-us = <3>; + ranges = <0x43000000 0x12 0x80000000 0x12 0x80000000 0x0 0x30000000>, /* prefetchable memory (768 MiB) */ + <0x02000000 0x0 0x40000000 0x12 0xb0000000 0x0 0x0fff0000>, /* non-prefetchable memory (256 MiB + 64 KiB) */ + <0x01000000 0x0 0x00000000 0x12 0xbfff0000 0x0 0x00010000>; /* downstream I/O (64 KiB) */ - bus-range = <0x0 0xff>; + interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE3R &emc>, + <&mc TEGRA194_MEMORY_CLIENT_PCIE3W &emc>; + interconnect-names = "dma-mem", "write"; + iommu-map = <0x0 &smmu TEGRA194_SID_PCIE3 0x1000>; + iommu-map-mask = <0x0>; + dma-coherent; + }; - ranges = <0x43000000 0x12 0x80000000 0x12 0x80000000 0x0 0x30000000>, /* prefetchable memory (768 MiB) */ - <0x02000000 0x0 0x40000000 0x12 0xb0000000 0x0 0x0fff0000>, /* non-prefetchable memory (256 MiB + 64 KiB) */ - <0x01000000 0x0 0x00000000 0x12 0xbfff0000 0x0 0x00010000>; /* downstream I/O (64 KiB) */ + pcie@14160000 { + compatible = "nvidia,tegra194-pcie"; + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX4A>; + reg = <0x00 0x14160000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x36000000 0x0 0x00040000>, /* configuration space (256K) */ + <0x00 0x36040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x36080000 0x0 0x00040000>; /* DBI reg space (256K) */ + reg-names = "appl", "config", "atu_dma", "dbi"; - interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE3R &emc>, - <&mc TEGRA194_MEMORY_CLIENT_PCIE3W &emc>; - interconnect-names = "dma-mem", "write"; - iommu-map = <0x0 &smmu TEGRA194_SID_PCIE3 0x1000>; - iommu-map-mask = <0x0>; - dma-coherent; - }; + status = "disabled"; - pcie@14160000 { - compatible = "nvidia,tegra194-pcie"; - power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX4A>; - reg = <0x00 0x14160000 0x0 0x00020000>, /* appl registers (128K) */ - <0x00 0x36000000 0x0 0x00040000>, /* configuration space (256K) */ - <0x00 0x36040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ - <0x00 0x36080000 0x0 0x00040000>; /* DBI reg space (256K) */ - reg-names = "appl", "config", "atu_dma", "dbi"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <4>; + linux,pci-domain = <4>; - status = "disabled"; + clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_4>; + clock-names = "core"; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - num-lanes = <4>; - linux,pci-domain = <4>; + resets = <&bpmp TEGRA194_RESET_PEX0_CORE_4_APB>, + <&bpmp TEGRA194_RESET_PEX0_CORE_4>; + reset-names = "apb", "core"; - clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_4>; - clock-names = "core"; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; - resets = <&bpmp TEGRA194_RESET_PEX0_CORE_4_APB>, - <&bpmp TEGRA194_RESET_PEX0_CORE_4>; - reset-names = "apb", "core"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; - interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ - <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ - interrupt-names = "intr", "msi"; + nvidia,bpmp = <&bpmp 4>; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; - nvidia,bpmp = <&bpmp 4>; + bus-range = <0x0 0xff>; - nvidia,aspm-cmrt-us = <60>; - nvidia,aspm-pwr-on-t-us = <20>; - nvidia,aspm-l0s-entrance-latency-us = <3>; + ranges = <0x43000000 0x14 0x00000000 0x14 0x00000000 0x3 0x40000000>, /* prefetchable memory (13 GiB) */ + <0x02000000 0x0 0x40000000 0x17 0x40000000 0x0 0xbfff0000>, /* non-prefetchable memory (3 GiB - 64 KiB) */ + <0x01000000 0x0 0x00000000 0x17 0xffff0000 0x0 0x00010000>; /* downstream I/O (64 KiB) */ - bus-range = <0x0 0xff>; + interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE4R &emc>, + <&mc TEGRA194_MEMORY_CLIENT_PCIE4W &emc>; + interconnect-names = "dma-mem", "write"; + iommu-map = <0x0 &smmu TEGRA194_SID_PCIE4 0x1000>; + iommu-map-mask = <0x0>; + dma-coherent; + }; - ranges = <0x43000000 0x14 0x00000000 0x14 0x00000000 0x3 0x40000000>, /* prefetchable memory (13 GiB) */ - <0x02000000 0x0 0x40000000 0x17 0x40000000 0x0 0xbfff0000>, /* non-prefetchable memory (3 GiB - 64 KiB) */ - <0x01000000 0x0 0x00000000 0x17 0xffff0000 0x0 0x00010000>; /* downstream I/O (64 KiB) */ + pcie-ep@14160000 { + compatible = "nvidia,tegra194-pcie-ep"; + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX4A>; + reg = <0x00 0x14160000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x36040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x36080000 0x0 0x00040000>, /* DBI reg space (256K) */ + <0x14 0x00000000 0x4 0x00000000>; /* Address Space (16G) */ + reg-names = "appl", "atu_dma", "dbi", "addr_space"; - interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE4R &emc>, - <&mc TEGRA194_MEMORY_CLIENT_PCIE4W &emc>; - interconnect-names = "dma-mem", "write"; - iommu-map = <0x0 &smmu TEGRA194_SID_PCIE4 0x1000>; - iommu-map-mask = <0x0>; - dma-coherent; - }; + status = "disabled"; - pcie@14180000 { - compatible = "nvidia,tegra194-pcie"; - power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8B>; - reg = <0x00 0x14180000 0x0 0x00020000>, /* appl registers (128K) */ - <0x00 0x38000000 0x0 0x00040000>, /* configuration space (256K) */ - <0x00 0x38040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ - <0x00 0x38080000 0x0 0x00040000>; /* DBI reg space (256K) */ - reg-names = "appl", "config", "atu_dma", "dbi"; + num-lanes = <4>; + num-ib-windows = <2>; + num-ob-windows = <8>; - status = "disabled"; + clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_4>; + clock-names = "core"; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - num-lanes = <8>; - linux,pci-domain = <0>; + resets = <&bpmp TEGRA194_RESET_PEX0_CORE_4_APB>, + <&bpmp TEGRA194_RESET_PEX0_CORE_4>; + reset-names = "apb", "core"; - clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_0>; - clock-names = "core"; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ + interrupt-names = "intr"; - resets = <&bpmp TEGRA194_RESET_PEX0_CORE_0_APB>, - <&bpmp TEGRA194_RESET_PEX0_CORE_0>; - reset-names = "apb", "core"; + nvidia,bpmp = <&bpmp 4>; - interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ - <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ - interrupt-names = "intr", "msi"; + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE4R &emc>, + <&mc TEGRA194_MEMORY_CLIENT_PCIE4W &emc>; + interconnect-names = "dma-mem", "write"; + iommu-map = <0x0 &smmu TEGRA194_SID_PCIE4 0x1000>; + iommu-map-mask = <0x0>; + dma-coherent; + }; - nvidia,bpmp = <&bpmp 0>; + pcie@14180000 { + compatible = "nvidia,tegra194-pcie"; + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8B>; + reg = <0x00 0x14180000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x38000000 0x0 0x00040000>, /* configuration space (256K) */ + <0x00 0x38040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x38080000 0x0 0x00040000>; /* DBI reg space (256K) */ + reg-names = "appl", "config", "atu_dma", "dbi"; - nvidia,aspm-cmrt-us = <60>; - nvidia,aspm-pwr-on-t-us = <20>; - nvidia,aspm-l0s-entrance-latency-us = <3>; + status = "disabled"; - bus-range = <0x0 0xff>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <8>; + linux,pci-domain = <0>; - ranges = <0x43000000 0x18 0x00000000 0x18 0x00000000 0x3 0x40000000>, /* prefetchable memory (13 GiB) */ - <0x02000000 0x0 0x40000000 0x1b 0x40000000 0x0 0xbfff0000>, /* non-prefetchable memory (3 GiB - 64 KiB) */ - <0x01000000 0x0 0x00000000 0x1b 0xffff0000 0x0 0x00010000>; /* downstream I/O (64 KiB) */ + clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_0>; + clock-names = "core"; - interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE0R &emc>, - <&mc TEGRA194_MEMORY_CLIENT_PCIE0W &emc>; - interconnect-names = "dma-mem", "write"; - iommu-map = <0x0 &smmu TEGRA194_SID_PCIE0 0x1000>; - iommu-map-mask = <0x0>; - dma-coherent; - }; + resets = <&bpmp TEGRA194_RESET_PEX0_CORE_0_APB>, + <&bpmp TEGRA194_RESET_PEX0_CORE_0>; + reset-names = "apb", "core"; - pcie@141a0000 { - compatible = "nvidia,tegra194-pcie"; - power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8A>; - reg = <0x00 0x141a0000 0x0 0x00020000>, /* appl registers (128K) */ - <0x00 0x3a000000 0x0 0x00040000>, /* configuration space (256K) */ - <0x00 0x3a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ - <0x00 0x3a080000 0x0 0x00040000>; /* DBI reg space (256K) */ - reg-names = "appl", "config", "atu_dma", "dbi"; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; - status = "disabled"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - num-lanes = <8>; - linux,pci-domain = <5>; + nvidia,bpmp = <&bpmp 0>; - pinctrl-names = "default"; - pinctrl-0 = <&pex_rst_c5_out_state>, <&clkreq_c5_bi_dir_state>; + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; - clocks = <&bpmp TEGRA194_CLK_PEX1_CORE_5>; - clock-names = "core"; + bus-range = <0x0 0xff>; - resets = <&bpmp TEGRA194_RESET_PEX1_CORE_5_APB>, - <&bpmp TEGRA194_RESET_PEX1_CORE_5>; - reset-names = "apb", "core"; + ranges = <0x43000000 0x18 0x00000000 0x18 0x00000000 0x3 0x40000000>, /* prefetchable memory (13 GiB) */ + <0x02000000 0x0 0x40000000 0x1b 0x40000000 0x0 0xbfff0000>, /* non-prefetchable memory (3 GiB - 64 KiB) */ + <0x01000000 0x0 0x00000000 0x1b 0xffff0000 0x0 0x00010000>; /* downstream I/O (64 KiB) */ - interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ - <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ - interrupt-names = "intr", "msi"; + interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE0R &emc>, + <&mc TEGRA194_MEMORY_CLIENT_PCIE0W &emc>; + interconnect-names = "dma-mem", "write"; + iommu-map = <0x0 &smmu TEGRA194_SID_PCIE0 0x1000>; + iommu-map-mask = <0x0>; + dma-coherent; + }; - nvidia,bpmp = <&bpmp 5>; + pcie-ep@14180000 { + compatible = "nvidia,tegra194-pcie-ep"; + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8B>; + reg = <0x00 0x14180000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x38040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x38080000 0x0 0x00040000>, /* DBI reg space (256K) */ + <0x18 0x00000000 0x4 0x00000000>; /* Address Space (16G) */ + reg-names = "appl", "atu_dma", "dbi", "addr_space"; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; - nvidia,aspm-cmrt-us = <60>; - nvidia,aspm-pwr-on-t-us = <20>; - nvidia,aspm-l0s-entrance-latency-us = <3>; + num-lanes = <8>; + num-ib-windows = <2>; + num-ob-windows = <8>; - bus-range = <0x0 0xff>; + clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_0>; + clock-names = "core"; - ranges = <0x43000000 0x1c 0x00000000 0x1c 0x00000000 0x3 0x40000000>, /* prefetchable memory (13 GiB) */ - <0x02000000 0x0 0x40000000 0x1f 0x40000000 0x0 0xbfff0000>, /* non-prefetchable memory (3 GiB - 64 KiB) */ - <0x01000000 0x0 0x00000000 0x1f 0xffff0000 0x0 0x00010000>; /* downstream I/O (64 KiB) */ + resets = <&bpmp TEGRA194_RESET_PEX0_CORE_0_APB>, + <&bpmp TEGRA194_RESET_PEX0_CORE_0>; + reset-names = "apb", "core"; - interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE5R &emc>, - <&mc TEGRA194_MEMORY_CLIENT_PCIE5W &emc>; - interconnect-names = "dma-mem", "write"; - iommu-map = <0x0 &smmu TEGRA194_SID_PCIE5 0x1000>; - iommu-map-mask = <0x0>; - dma-coherent; - }; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ + interrupt-names = "intr"; - pcie-ep@14160000 { - compatible = "nvidia,tegra194-pcie-ep"; - power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX4A>; - reg = <0x00 0x14160000 0x0 0x00020000>, /* appl registers (128K) */ - <0x00 0x36040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ - <0x00 0x36080000 0x0 0x00040000>, /* DBI reg space (256K) */ - <0x14 0x00000000 0x4 0x00000000>; /* Address Space (16G) */ - reg-names = "appl", "atu_dma", "dbi", "addr_space"; + nvidia,bpmp = <&bpmp 0>; - status = "disabled"; + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; - num-lanes = <4>; - num-ib-windows = <2>; - num-ob-windows = <8>; + interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE0R &emc>, + <&mc TEGRA194_MEMORY_CLIENT_PCIE0W &emc>; + interconnect-names = "dma-mem", "write"; + iommu-map = <0x0 &smmu TEGRA194_SID_PCIE0 0x1000>; + iommu-map-mask = <0x0>; + dma-coherent; + }; - clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_4>; - clock-names = "core"; + pcie@141a0000 { + compatible = "nvidia,tegra194-pcie"; + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8A>; + reg = <0x00 0x141a0000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x3a000000 0x0 0x00040000>, /* configuration space (256K) */ + <0x00 0x3a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x3a080000 0x0 0x00040000>; /* DBI reg space (256K) */ + reg-names = "appl", "config", "atu_dma", "dbi"; - resets = <&bpmp TEGRA194_RESET_PEX0_CORE_4_APB>, - <&bpmp TEGRA194_RESET_PEX0_CORE_4>; - reset-names = "apb", "core"; + status = "disabled"; - interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ - interrupt-names = "intr"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <8>; + linux,pci-domain = <5>; - nvidia,bpmp = <&bpmp 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pex_rst_c5_out_state>, <&pex_clkreq_c5_bi_dir_state>; - nvidia,aspm-cmrt-us = <60>; - nvidia,aspm-pwr-on-t-us = <20>; - nvidia,aspm-l0s-entrance-latency-us = <3>; + clocks = <&bpmp TEGRA194_CLK_PEX1_CORE_5>; + clock-names = "core"; - interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE4R &emc>, - <&mc TEGRA194_MEMORY_CLIENT_PCIE4W &emc>; - interconnect-names = "dma-mem", "write"; - iommu-map = <0x0 &smmu TEGRA194_SID_PCIE4 0x1000>; - iommu-map-mask = <0x0>; - dma-coherent; - }; + resets = <&bpmp TEGRA194_RESET_PEX1_CORE_5_APB>, + <&bpmp TEGRA194_RESET_PEX1_CORE_5>; + reset-names = "apb", "core"; - pcie-ep@14180000 { - compatible = "nvidia,tegra194-pcie-ep"; - power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8B>; - reg = <0x00 0x14180000 0x0 0x00020000>, /* appl registers (128K) */ - <0x00 0x38040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ - <0x00 0x38080000 0x0 0x00040000>, /* DBI reg space (256K) */ - <0x18 0x00000000 0x4 0x00000000>; /* Address Space (16G) */ - reg-names = "appl", "atu_dma", "dbi", "addr_space"; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; - status = "disabled"; + nvidia,bpmp = <&bpmp 5>; - num-lanes = <8>; - num-ib-windows = <2>; - num-ob-windows = <8>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_0>; - clock-names = "core"; + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; - resets = <&bpmp TEGRA194_RESET_PEX0_CORE_0_APB>, - <&bpmp TEGRA194_RESET_PEX0_CORE_0>; - reset-names = "apb", "core"; + bus-range = <0x0 0xff>; - interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ - interrupt-names = "intr"; + ranges = <0x43000000 0x1c 0x00000000 0x1c 0x00000000 0x3 0x40000000>, /* prefetchable memory (13 GiB) */ + <0x02000000 0x0 0x40000000 0x1f 0x40000000 0x0 0xbfff0000>, /* non-prefetchable memory (3 GiB - 64 KiB) */ + <0x01000000 0x0 0x00000000 0x1f 0xffff0000 0x0 0x00010000>; /* downstream I/O (64 KiB) */ - nvidia,bpmp = <&bpmp 0>; + interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE5R &emc>, + <&mc TEGRA194_MEMORY_CLIENT_PCIE5W &emc>; + interconnect-names = "dma-mem", "write"; + iommu-map = <0x0 &smmu TEGRA194_SID_PCIE5 0x1000>; + iommu-map-mask = <0x0>; + dma-coherent; + }; - nvidia,aspm-cmrt-us = <60>; - nvidia,aspm-pwr-on-t-us = <20>; - nvidia,aspm-l0s-entrance-latency-us = <3>; + pcie-ep@141a0000 { + compatible = "nvidia,tegra194-pcie-ep"; + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8A>; + reg = <0x00 0x141a0000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x3a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x3a080000 0x0 0x00040000>, /* DBI reg space (256K) */ + <0x1c 0x00000000 0x4 0x00000000>; /* Address Space (16G) */ + reg-names = "appl", "atu_dma", "dbi", "addr_space"; - interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE0R &emc>, - <&mc TEGRA194_MEMORY_CLIENT_PCIE0W &emc>; - interconnect-names = "dma-mem", "write"; - iommu-map = <0x0 &smmu TEGRA194_SID_PCIE0 0x1000>; - iommu-map-mask = <0x0>; - dma-coherent; - }; + status = "disabled"; - pcie-ep@141a0000 { - compatible = "nvidia,tegra194-pcie-ep"; - power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8A>; - reg = <0x00 0x141a0000 0x0 0x00020000>, /* appl registers (128K) */ - <0x00 0x3a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ - <0x00 0x3a080000 0x0 0x00040000>, /* DBI reg space (256K) */ - <0x1c 0x00000000 0x4 0x00000000>; /* Address Space (16G) */ - reg-names = "appl", "atu_dma", "dbi", "addr_space"; + num-lanes = <8>; + num-ib-windows = <2>; + num-ob-windows = <8>; - status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&pex_clkreq_c5_bi_dir_state>; - num-lanes = <8>; - num-ib-windows = <2>; - num-ob-windows = <8>; + clocks = <&bpmp TEGRA194_CLK_PEX1_CORE_5>; + clock-names = "core"; - pinctrl-names = "default"; - pinctrl-0 = <&clkreq_c5_bi_dir_state>; + resets = <&bpmp TEGRA194_RESET_PEX1_CORE_5_APB>, + <&bpmp TEGRA194_RESET_PEX1_CORE_5>; + reset-names = "apb", "core"; - clocks = <&bpmp TEGRA194_CLK_PEX1_CORE_5>; - clock-names = "core"; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ + interrupt-names = "intr"; - resets = <&bpmp TEGRA194_RESET_PEX1_CORE_5_APB>, - <&bpmp TEGRA194_RESET_PEX1_CORE_5>; - reset-names = "apb", "core"; + nvidia,bpmp = <&bpmp 5>; - interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ - interrupt-names = "intr"; + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; - nvidia,bpmp = <&bpmp 5>; + interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE5R &emc>, + <&mc TEGRA194_MEMORY_CLIENT_PCIE5W &emc>; + interconnect-names = "dma-mem", "write"; + iommu-map = <0x0 &smmu TEGRA194_SID_PCIE5 0x1000>; + iommu-map-mask = <0x0>; + dma-coherent; + }; - nvidia,aspm-cmrt-us = <60>; - nvidia,aspm-pwr-on-t-us = <20>; - nvidia,aspm-l0s-entrance-latency-us = <3>; + gpu@17000000 { + compatible = "nvidia,gv11b"; + reg = <0x0 0x17000000 0x0 0x1000000>, + <0x0 0x18000000 0x0 0x1000000>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "stall", "nonstall"; + clocks = <&bpmp TEGRA194_CLK_GPCCLK>, + <&bpmp TEGRA194_CLK_GPU_PWR>, + <&bpmp TEGRA194_CLK_FUSE>; + clock-names = "gpu", "pwr", "fuse"; + resets = <&bpmp TEGRA194_RESET_GPU>; + reset-names = "gpu"; + dma-coherent; - interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE5R &emc>, - <&mc TEGRA194_MEMORY_CLIENT_PCIE5W &emc>; - interconnect-names = "dma-mem", "write"; - iommu-map = <0x0 &smmu TEGRA194_SID_PCIE5 0x1000>; - iommu-map-mask = <0x0>; - dma-coherent; + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_GPU>; + interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVL1R &emc>, + <&mc TEGRA194_MEMORY_CLIENT_NVL1RHP &emc>, + <&mc TEGRA194_MEMORY_CLIENT_NVL1W &emc>, + <&mc TEGRA194_MEMORY_CLIENT_NVL2R &emc>, + <&mc TEGRA194_MEMORY_CLIENT_NVL2RHP &emc>, + <&mc TEGRA194_MEMORY_CLIENT_NVL2W &emc>, + <&mc TEGRA194_MEMORY_CLIENT_NVL3R &emc>, + <&mc TEGRA194_MEMORY_CLIENT_NVL3RHP &emc>, + <&mc TEGRA194_MEMORY_CLIENT_NVL3W &emc>, + <&mc TEGRA194_MEMORY_CLIENT_NVL4R &emc>, + <&mc TEGRA194_MEMORY_CLIENT_NVL4RHP &emc>, + <&mc TEGRA194_MEMORY_CLIENT_NVL4W &emc>; + interconnect-names = "dma-mem", "read-0-hp", "write-0", + "read-1", "read-1-hp", "write-1", + "read-2", "read-2-hp", "write-2", + "read-3", "read-3-hp", "write-3"; + }; }; sram@40000000 { compatible = "nvidia,tegra194-sysram", "mmio-sram"; reg = <0x0 0x40000000 0x0 0x50000>; + #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x0 0x40000000 0x50000>; + no-memory-wc; cpu_bpmp_tx: sram@4e000 { @@ -3117,6 +3108,13 @@ method = "smc"; }; + tcu: serial { + compatible = "nvidia,tegra194-tcu"; + mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_SM TEGRA_HSP_SM_RX(0)>, + <&hsp_aon TEGRA_HSP_MBOX_TYPE_SM TEGRA_HSP_SM_TX(1)>; + mbox-names = "rx", "tx"; + }; + sound { status = "disabled"; @@ -3137,13 +3135,6 @@ assigned-clock-rates = <258000000>; }; - tcu: serial { - compatible = "nvidia,tegra194-tcu"; - mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_SM TEGRA_HSP_SM_RX(0)>, - <&hsp_aon TEGRA_HSP_MBOX_TYPE_SM TEGRA_HSP_SM_TX(1)>; - mbox-names = "rx", "tx"; - }; - thermal-zones { cpu-thermal { thermal-sensors = <&{/bpmp/thermal} TEGRA194_BPMP_THERMAL_ZONE_CPU>; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi index 75eb743a7242..92163b680980 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi @@ -31,6 +31,23 @@ status = "okay"; }; + i2c@7000c500 { + status = "okay"; + + /* module ID EEPROM */ + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + + label = "module"; + vcc-supply = <&vdd_1v8>; + address-width = <8>; + pagesize = <8>; + size = <256>; + read-only; + }; + }; + i2c@7000d000 { status = "okay"; clock-frequency = <400000>; @@ -50,6 +67,22 @@ pinctrl-names = "default"; pinctrl-0 = <&max77620_default>; + fps { + fps0 { + maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>; + maxim,suspend-fps-time-period-us = <1280>; + }; + + fps1 { + maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>; + maxim,suspend-fps-time-period-us = <1280>; + }; + + fps2 { + maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>; + }; + }; + max77620_default: pinmux { gpio0 { pins = "gpio0"; @@ -84,22 +117,6 @@ }; }; - fps { - fps0 { - maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>; - maxim,suspend-fps-time-period-us = <1280>; - }; - - fps1 { - maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>; - maxim,suspend-fps-time-period-us = <1280>; - }; - - fps2 { - maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>; - }; - }; - regulators { in-ldo0-1-supply = <&vdd_pre>; in-ldo7-8-supply = <&vdd_pre>; @@ -265,23 +282,6 @@ }; }; - i2c@7000c500 { - status = "okay"; - - /* module ID EEPROM */ - eeprom@50 { - compatible = "atmel,24c02"; - reg = <0x50>; - - label = "module"; - vcc-supply = <&vdd_1v8>; - address-width = <8>; - pagesize = <8>; - size = <256>; - read-only; - }; - }; - pmc@7000e400 { nvidia,invert-interrupt; nvidia,suspend-mode = <0>; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts index 1e26ca91a944..38f4ff229bef 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts @@ -63,17 +63,17 @@ pwms = <&pwm 0 29334>; pwm-names = "lp8557"; - /* 3 LED string */ - rom_14h { - rom-addr = /bits/ 8 <0x14>; - rom-val = /bits/ 8 <0x87>; - }; - /* boost frequency 1 MHz */ rom_13h { rom-addr = /bits/ 8 <0x13>; rom-val = /bits/ 8 <0x01>; }; + + /* 3 LED string */ + rom_14h { + rom-addr = /bits/ 8 <0x14>; + rom-val = /bits/ 8 <0x87>; + }; }; }; @@ -116,14 +116,6 @@ aconnect@702c0000 { status = "okay"; - dma-controller@702e2000 { - status = "okay"; - }; - - interrupt-controller@702f9000 { - status = "okay"; - }; - ahub@702d0800 { status = "okay"; @@ -261,81 +253,6 @@ }; }; - dmic@702d4000 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - dmic1_cif_ep: endpoint { - remote-endpoint = <&xbar_dmic1_ep>; - }; - }; - - dmic1_port: port@1 { - reg = <1>; - - dmic1_dap_ep: endpoint { - /* Placeholder for external Codec */ - }; - }; - }; - }; - - dmic@702d4100 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - dmic2_cif_ep: endpoint { - remote-endpoint = <&xbar_dmic2_ep>; - }; - }; - - dmic2_port: port@1 { - reg = <1>; - - dmic2_dap_ep: endpoint { - /* Placeholder for external Codec */ - }; - }; - }; - }; - - dmic@702d4200 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - dmic3_cif_ep: endpoint { - remote-endpoint = <&xbar_dmic3_ep>; - }; - }; - - dmic3_port: port@1 { - reg = <1>; - - dmic3_dap_ep: endpoint { - /* Placeholder for external Codec */ - }; - }; - }; - }; - sfc@702d2000 { status = "okay"; @@ -436,56 +353,6 @@ }; }; - mvc@702da000 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - mvc1_cif_in_ep: endpoint { - remote-endpoint = <&xbar_mvc1_in_ep>; - }; - }; - - mvc1_out_port: port@1 { - reg = <1>; - - mvc1_cif_out_ep: endpoint { - remote-endpoint = <&xbar_mvc1_out_ep>; - }; - }; - }; - }; - - mvc@702da200 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - mvc2_cif_in_ep: endpoint { - remote-endpoint = <&xbar_mvc2_in_ep>; - }; - }; - - mvc2_out_port: port@1 { - reg = <1>; - - mvc2_cif_out_ep: endpoint { - remote-endpoint = <&xbar_mvc2_out_ep>; - }; - }; - }; - }; - amx@702d3000 { status = "okay"; @@ -682,6 +549,81 @@ }; }; + dmic@702d4000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dmic1_cif_ep: endpoint { + remote-endpoint = <&xbar_dmic1_ep>; + }; + }; + + dmic1_port: port@1 { + reg = <1>; + + dmic1_dap_ep: endpoint { + /* Placeholder for external Codec */ + }; + }; + }; + }; + + dmic@702d4100 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dmic2_cif_ep: endpoint { + remote-endpoint = <&xbar_dmic2_ep>; + }; + }; + + dmic2_port: port@1 { + reg = <1>; + + dmic2_dap_ep: endpoint { + /* Placeholder for external Codec */ + }; + }; + }; + }; + + dmic@702d4200 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dmic3_cif_ep: endpoint { + remote-endpoint = <&xbar_dmic3_ep>; + }; + }; + + dmic3_port: port@1 { + reg = <1>; + + dmic3_dap_ep: endpoint { + /* Placeholder for external Codec */ + }; + }; + }; + }; + processing-engine@702d8000 { status = "okay"; @@ -732,6 +674,56 @@ }; }; + mvc@702da000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mvc1_cif_in_ep: endpoint { + remote-endpoint = <&xbar_mvc1_in_ep>; + }; + }; + + mvc1_out_port: port@1 { + reg = <1>; + + mvc1_cif_out_ep: endpoint { + remote-endpoint = <&xbar_mvc1_out_ep>; + }; + }; + }; + }; + + mvc@702da200 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mvc2_cif_in_ep: endpoint { + remote-endpoint = <&xbar_mvc2_in_ep>; + }; + }; + + mvc2_out_port: port@1 { + reg = <1>; + + mvc2_cif_out_ep: endpoint { + remote-endpoint = <&xbar_mvc2_out_ep>; + }; + }; + }; + }; + amixer@702dbb00 { status = "okay"; @@ -1335,6 +1327,14 @@ }; }; }; + + dma-controller@702e2000 { + status = "okay"; + }; + + interrupt-controller@702f9000 { + status = "okay"; + }; }; sound { diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2595.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2595.dtsi index 6ae292da7294..65181da730fa 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2595.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2595.dtsi @@ -1,4 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 + +#include <dt-bindings/pinctrl/pinctrl-tegra.h> + / { model = "NVIDIA Tegra210 P2595 I/O board"; compatible = "nvidia,p2595", "nvidia,tegra210"; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi index dd9a17922fe5..b4a1108c2dd7 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi @@ -1,5 +1,8 @@ // SPDX-License-Identifier: GPL-2.0 + +#include <dt-bindings/gpio/tegra-gpio.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/pinctrl-tegra.h> / { model = "NVIDIA Tegra210 P2597 I/O board"; @@ -1667,7 +1670,7 @@ vin-supply = <&vdd_5v0_sys>; }; - vdd_cam_1v2: regulator-vdd-cam-1v8 { + vdd_cam_1v2: regulator-vdd-cam-1v2 { compatible = "regulator-fixed"; regulator-name = "vdd-cam-1v2"; regulator-min-microvolt = <1200000>; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi index 8e657b10569d..1f263fd32a7a 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi @@ -1342,7 +1342,35 @@ pinctrl-names = "default"; pinctrl-0 = <&max77620_default>; - max77620_default: pinmux@0 { + fps { + #address-cells = <1>; + #size-cells = <0>; + + fps0 { + reg = <0>; + maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>; + }; + + fps1 { + reg = <1>; + maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>; + maxim,device-state-on-disabled-event = <MAX77620_FPS_INACTIVE_STATE_SLEEP>; + }; + + fps2 { + reg = <2>; + maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>; + }; + }; + + hog-0 { + gpio-hog; + output-high; + gpios = <2 GPIO_ACTIVE_HIGH>, + <7 GPIO_ACTIVE_HIGH>; + }; + + max77620_default: pinmux { gpio0 { pins = "gpio0"; function = "gpio"; @@ -1383,34 +1411,6 @@ }; }; - hog-0 { - gpio-hog; - output-high; - gpios = <2 GPIO_ACTIVE_HIGH>, - <7 GPIO_ACTIVE_HIGH>; - }; - - fps { - #address-cells = <1>; - #size-cells = <0>; - - fps0 { - reg = <0>; - maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>; - }; - - fps1 { - reg = <1>; - maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>; - maxim,device-state-on-disabled-event = <MAX77620_FPS_INACTIVE_STATE_SLEEP>; - }; - - fps2 { - reg = <2>; - maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>; - }; - }; - regulators { in-ldo0-1-supply = <&max77620_sd2>; in-ldo7-8-supply = <&max77620_sd2>; @@ -1592,20 +1592,6 @@ #clock-cells = <0>; }; - gpio-keys { - compatible = "gpio-keys"; - status = "okay"; - - key-power { - debounce-interval = <30>; - gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>; - label = "Power"; - linux,code = <KEY_POWER>; - wakeup-event-action = <EV_ACT_ASSERTED>; - wakeup-source; - }; - }; - cpus { cpu@0 { enable-method = "psci"; @@ -1630,6 +1616,20 @@ }; }; + gpio-keys { + compatible = "gpio-keys"; + status = "okay"; + + key-power { + debounce-interval = <30>; + gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>; + label = "Power"; + linux,code = <KEY_POWER>; + wakeup-event-action = <EV_ACT_ASSERTED>; + wakeup-source; + }; + }; + psci { compatible = "arm,psci-1.0"; method = "smc"; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts index 2041371ea7ff..c9f488e14f37 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts @@ -186,6 +186,22 @@ pinctrl-names = "default"; pinctrl-0 = <&max77620_default>; + fps { + fps0 { + maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>; + maxim,suspend-fps-time-period-us = <5120>; + }; + + fps1 { + maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>; + maxim,suspend-fps-time-period-us = <5120>; + }; + + fps2 { + maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>; + }; + }; + max77620_default: pinmux { gpio0 { pins = "gpio0"; @@ -231,22 +247,6 @@ }; }; - fps { - fps0 { - maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>; - maxim,suspend-fps-time-period-us = <5120>; - }; - - fps1 { - maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>; - maxim,suspend-fps-time-period-us = <5120>; - }; - - fps2 { - maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>; - }; - }; - regulators { in-ldo0-1-supply = <&vdd_pre>; in-ldo2-supply = <&vdd_3v3_sys>; @@ -611,14 +611,6 @@ aconnect@702c0000 { status = "okay"; - dma-controller@702e2000 { - status = "okay"; - }; - - interrupt-controller@702f9000 { - status = "okay"; - }; - ahub@702d0800 { status = "okay"; @@ -678,56 +670,6 @@ }; }; - dmic@702d4000 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - dmic1_cif_ep: endpoint { - remote-endpoint = <&xbar_dmic1_ep>; - }; - }; - - dmic1_port: port@1 { - reg = <1>; - - dmic1_dap_ep: endpoint { - /* Placeholder for external Codec */ - }; - }; - }; - }; - - dmic@702d4100 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - dmic2_cif_ep: endpoint { - remote-endpoint = <&xbar_dmic2_ep>; - }; - }; - - dmic2_port: port@1 { - reg = <1>; - - dmic2_dap_ep: endpoint { - /* Placeholder for external Codec */ - }; - }; - }; - }; - sfc@702d2000 { status = "okay"; @@ -828,56 +770,6 @@ }; }; - mvc@702da000 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - mvc1_cif_in_ep: endpoint { - remote-endpoint = <&xbar_mvc1_in_ep>; - }; - }; - - mvc1_out_port: port@1 { - reg = <1>; - - mvc1_cif_out_ep: endpoint { - remote-endpoint = <&xbar_mvc1_out_ep>; - }; - }; - }; - }; - - mvc@702da200 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - mvc2_cif_in_ep: endpoint { - remote-endpoint = <&xbar_mvc2_in_ep>; - }; - }; - - mvc2_out_port: port@1 { - reg = <1>; - - mvc2_cif_out_ep: endpoint { - remote-endpoint = <&xbar_mvc2_out_ep>; - }; - }; - }; - }; - amx@702d3000 { status = "okay"; @@ -1074,6 +966,56 @@ }; }; + dmic@702d4000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dmic1_cif_ep: endpoint { + remote-endpoint = <&xbar_dmic1_ep>; + }; + }; + + dmic1_port: port@1 { + reg = <1>; + + dmic1_dap_ep: endpoint { + /* Placeholder for external Codec */ + }; + }; + }; + }; + + dmic@702d4100 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dmic2_cif_ep: endpoint { + remote-endpoint = <&xbar_dmic2_ep>; + }; + }; + + dmic2_port: port@1 { + reg = <1>; + + dmic2_dap_ep: endpoint { + /* Placeholder for external Codec */ + }; + }; + }; + }; + processing-engine@702d8000 { status = "okay"; @@ -1124,6 +1066,56 @@ }; }; + mvc@702da000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mvc1_cif_in_ep: endpoint { + remote-endpoint = <&xbar_mvc1_in_ep>; + }; + }; + + mvc1_out_port: port@1 { + reg = <1>; + + mvc1_cif_out_ep: endpoint { + remote-endpoint = <&xbar_mvc1_out_ep>; + }; + }; + }; + }; + + mvc@702da200 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mvc2_cif_in_ep: endpoint { + remote-endpoint = <&xbar_mvc2_in_ep>; + }; + }; + + mvc2_out_port: port@1 { + reg = <1>; + + mvc2_cif_out_ep: endpoint { + remote-endpoint = <&xbar_mvc2_out_ep>; + }; + }; + }; + }; + amixer@702dbb00 { status = "okay"; @@ -1695,6 +1687,14 @@ }; }; }; + + dma-controller@702e2000 { + status = "okay"; + }; + + interrupt-controller@702f9000 { + status = "okay"; + }; }; spi@70410000 { @@ -1739,69 +1739,17 @@ }; }; - fan: pwm-fan { - compatible = "pwm-fan"; - pwms = <&pwm 3 45334>; - - cooling-levels = <0 64 128 255>; - #cooling-cells = <2>; - }; - - thermal-zones { - cpu-thermal { - trips { - cpu_trip_critical: critical { - temperature = <96500>; - hysteresis = <0>; - type = "critical"; - }; - - cpu_trip_hot: hot { - temperature = <70000>; - hysteresis = <2000>; - type = "hot"; - }; - - cpu_trip_active: active { - temperature = <50000>; - hysteresis = <2000>; - type = "active"; - }; - - cpu_trip_passive: passive { - temperature = <30000>; - hysteresis = <2000>; - type = "passive"; - }; - }; - - cooling-maps { - cpu-critical { - cooling-device = <&fan 3 3>; - trip = <&cpu_trip_critical>; - }; - - cpu-hot { - cooling-device = <&fan 2 2>; - trip = <&cpu_trip_hot>; - }; - - cpu-active { - cooling-device = <&fan 1 1>; - trip = <&cpu_trip_active>; - }; - - cpu-passive { - cooling-device = <&fan 0 0>; - trip = <&cpu_trip_passive>; - }; - }; - }; - }; - gpio-keys { compatible = "gpio-keys"; + key-force-recovery { + label = "Force Recovery"; + gpios = <&gpio TEGRA_GPIO(X, 6) GPIO_ACTIVE_LOW>; + linux,input-type = <EV_KEY>; + linux,code = <BTN_1>; + debounce-interval = <30>; + }; + key-power { label = "Power"; gpios = <&gpio TEGRA_GPIO(X, 5) GPIO_ACTIVE_LOW>; @@ -1811,14 +1759,6 @@ wakeup-event-action = <EV_ACT_ASSERTED>; wakeup-source; }; - - key-force-recovery { - label = "Force Recovery"; - gpios = <&gpio TEGRA_GPIO(X, 6) GPIO_ACTIVE_LOW>; - linux,input-type = <EV_KEY>; - linux,code = <BTN_1>; - debounce-interval = <30>; - }; }; psci { @@ -1826,6 +1766,14 @@ method = "smc"; }; + fan: pwm-fan { + compatible = "pwm-fan"; + pwms = <&pwm 3 45334>; + + cooling-levels = <0 64 128 255>; + #cooling-cells = <2>; + }; + vdd_5v0_sys: regulator-vdd-5v0-sys { compatible = "regulator-fixed"; @@ -1986,4 +1934,56 @@ label = "NVIDIA Jetson Nano APE"; }; + + thermal-zones { + cpu-thermal { + trips { + cpu_trip_critical: critical { + temperature = <96500>; + hysteresis = <0>; + type = "critical"; + }; + + cpu_trip_hot: hot { + temperature = <70000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpu_trip_active: active { + temperature = <50000>; + hysteresis = <2000>; + type = "active"; + }; + + cpu_trip_passive: passive { + temperature = <30000>; + hysteresis = <2000>; + type = "passive"; + }; + }; + + cooling-maps { + cpu-critical { + cooling-device = <&fan 3 3>; + trip = <&cpu_trip_critical>; + }; + + cpu-hot { + cooling-device = <&fan 2 2>; + trip = <&cpu_trip_hot>; + }; + + cpu-active { + cooling-device = <&fan 1 1>; + trip = <&cpu_trip_active>; + }; + + cpu-passive { + cooling-device = <&fan 0 0>; + trip = <&cpu_trip_passive>; + }; + }; + }; + }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts index 7c569695b705..d7d7c63e62e2 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts +++ b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts @@ -1389,6 +1389,23 @@ pinctrl-names = "default"; pinctrl-0 = <&max77620_default>; + fps { + fps0 { + maxim,shutdown-fps-time-period-us = <5120>; + maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>; + }; + + fps1 { + maxim,shutdown-fps-time-period-us = <5120>; + maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>; + maxim,device-state-on-disabled-event = <MAX77620_FPS_INACTIVE_STATE_SLEEP>; + }; + + fps2 { + maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>; + }; + }; + max77620_default: pinmux { gpio0_1_2_7 { pins = "gpio0", "gpio1", "gpio2", "gpio7"; @@ -1409,32 +1426,15 @@ maxim,active-fps-power-down-slot = <2>; }; - gpio5_6 { - pins = "gpio5", "gpio6"; - function = "gpio"; - drive-push-pull = <1>; - }; - gpio4 { pins = "gpio4"; function = "32k-out1"; }; - }; - - fps { - fps0 { - maxim,shutdown-fps-time-period-us = <5120>; - maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>; - }; - - fps1 { - maxim,shutdown-fps-time-period-us = <5120>; - maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>; - maxim,device-state-on-disabled-event = <MAX77620_FPS_INACTIVE_STATE_SLEEP>; - }; - fps2 { - maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>; + gpio5_6 { + pins = "gpio5", "gpio6"; + function = "gpio"; + drive-push-pull = <1>; }; }; @@ -1800,6 +1800,18 @@ wakeup-source; }; + key-volume-down { + label = "Volume Down"; + gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + }; + + key-volume-up { + label = "Volume Up"; + gpios = <&gpio TEGRA_GPIO(M, 4) GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + switch-lid { label = "Lid"; gpios = <&gpio TEGRA_GPIO(B, 4) GPIO_ACTIVE_LOW>; @@ -1815,18 +1827,6 @@ linux,code = <SW_TABLET_MODE>; wakeup-source; }; - - key-volume-down { - label = "Volume Down"; - gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>; - linux,code = <KEY_VOLUMEDOWN>; - }; - - key-volume-up { - label = "Volume Up"; - gpios = <&gpio TEGRA_GPIO(M, 4) GPIO_ACTIVE_LOW>; - linux,code = <KEY_VOLUMEUP>; - }; }; max98357a { diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi index bc0cacb20d7a..980565bf02c9 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi @@ -555,19 +555,19 @@ reg = <0x0 0x700008d4 0x0 0x29c>, /* Pad control registers */ <0x0 0x70003000 0x0 0x294>; /* Mux registers */ - sdmmc1_3v3_drv: pinmux-sdmmc1-3v3-drv { + sdmmc1_1v8_drv: pinmux-sdmmc1-1v8-drv { sdmmc1 { nvidia,pins = "drive_sdmmc1"; - nvidia,pull-down-strength = <0x8>; - nvidia,pull-up-strength = <0x8>; + nvidia,pull-down-strength = <0x4>; + nvidia,pull-up-strength = <0x3>; }; }; - sdmmc1_1v8_drv: pinmux-sdmmc1-1v8-drv { + sdmmc1_3v3_drv: pinmux-sdmmc1-3v3-drv { sdmmc1 { nvidia,pins = "drive_sdmmc1"; - nvidia,pull-down-strength = <0x4>; - nvidia,pull-up-strength = <0x3>; + nvidia,pull-down-strength = <0x8>; + nvidia,pull-up-strength = <0x8>; }; }; @@ -579,19 +579,19 @@ }; }; - sdmmc3_3v3_drv: pinmux-sdmmc3-3v3-drv { + sdmmc3_1v8_drv: pinmux-sdmmc3-1v8-drv { sdmmc3 { nvidia,pins = "drive_sdmmc3"; - nvidia,pull-down-strength = <0x8>; - nvidia,pull-up-strength = <0x8>; + nvidia,pull-down-strength = <0x4>; + nvidia,pull-up-strength = <0x3>; }; }; - sdmmc3_1v8_drv: pinmux-sdmmc3-1v8-drv { + sdmmc3_3v3_drv: pinmux-sdmmc3-3v3-drv { sdmmc3 { nvidia,pins = "drive_sdmmc3"; - nvidia,pull-down-strength = <0x4>; - nvidia,pull-up-strength = <0x3>; + nvidia,pull-down-strength = <0x8>; + nvidia,pull-up-strength = <0x8>; }; }; @@ -852,6 +852,38 @@ #interrupt-cells = <2>; interrupt-controller; + pinmux { + pex_dpd_disable: pex-dpd-disable { + pins = "pex-bias", "pex-clk1", "pex-clk2"; + low-power-disable; + }; + + pex_dpd_enable: pex-dpd-enable { + pins = "pex-bias", "pex-clk1", "pex-clk2"; + low-power-enable; + }; + + sdmmc1_1v8: sdmmc1-1v8 { + pins = "sdmmc1"; + power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>; + }; + + sdmmc1_3v3: sdmmc1-3v3 { + pins = "sdmmc1"; + power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>; + }; + + sdmmc3_1v8: sdmmc3-1v8 { + pins = "sdmmc3"; + power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>; + }; + + sdmmc3_3v3: sdmmc3-3v3 { + pins = "sdmmc3"; + power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>; + }; + }; + powergates { pd_audio: aud { clocks = <&tegra_car TEGRA210_CLK_APE>, @@ -881,21 +913,12 @@ #power-domain-cells = <0>; }; - pd_xusbss: xusba { - clocks = <&tegra_car TEGRA210_CLK_XUSB_SS>; - resets = <&tegra_car TEGRA210_CLK_XUSB_SS>; - #power-domain-cells = <0>; - }; - - pd_xusbdev: xusbb { - clocks = <&tegra_car TEGRA210_CLK_XUSB_DEV>; - resets = <&tegra_car 95>; - #power-domain-cells = <0>; - }; - - pd_xusbhost: xusbc { - clocks = <&tegra_car TEGRA210_CLK_XUSB_HOST>; - resets = <&tegra_car TEGRA210_CLK_XUSB_HOST>; + pd_venc: venc { + clocks = <&tegra_car TEGRA210_CLK_VI>, + <&tegra_car TEGRA210_CLK_CSI>; + resets = <&mc TEGRA210_MC_RESET_VI>, + <&tegra_car 20>, + <&tegra_car 52>; #power-domain-cells = <0>; }; @@ -907,45 +930,22 @@ #power-domain-cells = <0>; }; - pd_venc: venc { - clocks = <&tegra_car TEGRA210_CLK_VI>, - <&tegra_car TEGRA210_CLK_CSI>; - resets = <&mc TEGRA210_MC_RESET_VI>, - <&tegra_car 20>, - <&tegra_car 52>; + pd_xusbss: xusba { + clocks = <&tegra_car TEGRA210_CLK_XUSB_SS>; + resets = <&tegra_car TEGRA210_CLK_XUSB_SS>; #power-domain-cells = <0>; }; - }; - - pinmux { - sdmmc1_3v3: sdmmc1-3v3 { - pins = "sdmmc1"; - power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>; - }; - - sdmmc1_1v8: sdmmc1-1v8 { - pins = "sdmmc1"; - power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>; - }; - sdmmc3_3v3: sdmmc3-3v3 { - pins = "sdmmc3"; - power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>; - }; - - sdmmc3_1v8: sdmmc3-1v8 { - pins = "sdmmc3"; - power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>; - }; - - pex_dpd_disable: pex-dpd-disable { - pins = "pex-bias", "pex-clk1", "pex-clk2"; - low-power-disable; + pd_xusbdev: xusbb { + clocks = <&tegra_car TEGRA210_CLK_XUSB_DEV>; + resets = <&tegra_car 95>; + #power-domain-cells = <0>; }; - pex_dpd_enable: pex-dpd-enable { - pins = "pex-bias", "pex-clk1", "pex-clk2"; - low-power-enable; + pd_xusbhost: xusbc { + clocks = <&tegra_car TEGRA210_CLK_XUSB_HOST>; + resets = <&tegra_car TEGRA210_CLK_XUSB_HOST>; + #power-domain-cells = <0>; }; }; }; @@ -1388,50 +1388,6 @@ ranges = <0x702c0000 0x0 0x702c0000 0x00040000>; status = "disabled"; - adma: dma-controller@702e2000 { - compatible = "nvidia,tegra210-adma"; - reg = <0x702e2000 0x2000>; - interrupt-parent = <&agic>; - interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; - #dma-cells = <1>; - clocks = <&tegra_car TEGRA210_CLK_D_AUDIO>; - clock-names = "d_audio"; - status = "disabled"; - }; - - agic: interrupt-controller@702f9000 { - compatible = "nvidia,tegra210-agic"; - #interrupt-cells = <3>; - interrupt-controller; - reg = <0x702f9000 0x1000>, - <0x702fa000 0x2000>; - interrupts = <GIC_SPI 102 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; - clocks = <&tegra_car TEGRA210_CLK_APE>; - clock-names = "clk"; - status = "disabled"; - }; - tegra_ahub: ahub@702d0800 { compatible = "nvidia,tegra210-ahub"; reg = <0x702d0800 0x800>; @@ -1620,42 +1576,6 @@ status = "disabled"; }; - tegra_dmic1: dmic@702d4000 { - compatible = "nvidia,tegra210-dmic"; - reg = <0x702d4000 0x100>; - clocks = <&tegra_car TEGRA210_CLK_DMIC1>; - clock-names = "dmic"; - assigned-clocks = <&tegra_car TEGRA210_CLK_DMIC1>; - assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_A_OUT0>; - assigned-clock-rates = <3072000>; - sound-name-prefix = "DMIC1"; - status = "disabled"; - }; - - tegra_dmic2: dmic@702d4100 { - compatible = "nvidia,tegra210-dmic"; - reg = <0x702d4100 0x100>; - clocks = <&tegra_car TEGRA210_CLK_DMIC2>; - clock-names = "dmic"; - assigned-clocks = <&tegra_car TEGRA210_CLK_DMIC2>; - assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_A_OUT0>; - assigned-clock-rates = <3072000>; - sound-name-prefix = "DMIC2"; - status = "disabled"; - }; - - tegra_dmic3: dmic@702d4200 { - compatible = "nvidia,tegra210-dmic"; - reg = <0x702d4200 0x100>; - clocks = <&tegra_car TEGRA210_CLK_DMIC3>; - clock-names = "dmic"; - assigned-clocks = <&tegra_car TEGRA210_CLK_DMIC3>; - assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_A_OUT0>; - assigned-clock-rates = <3072000>; - sound-name-prefix = "DMIC3"; - status = "disabled"; - }; - tegra_sfc1: sfc@702d2000 { compatible = "nvidia,tegra210-sfc"; reg = <0x702d2000 0x200>; @@ -1684,20 +1604,6 @@ status = "disabled"; }; - tegra_mvc1: mvc@702da000 { - compatible = "nvidia,tegra210-mvc"; - reg = <0x702da000 0x200>; - sound-name-prefix = "MVC1"; - status = "disabled"; - }; - - tegra_mvc2: mvc@702da200 { - compatible = "nvidia,tegra210-mvc"; - reg = <0x702da200 0x200>; - sound-name-prefix = "MVC2"; - status = "disabled"; - }; - tegra_amx1: amx@702d3000 { compatible = "nvidia,tegra210-amx"; reg = <0x702d3000 0x100>; @@ -1726,6 +1632,42 @@ status = "disabled"; }; + tegra_dmic1: dmic@702d4000 { + compatible = "nvidia,tegra210-dmic"; + reg = <0x702d4000 0x100>; + clocks = <&tegra_car TEGRA210_CLK_DMIC1>; + clock-names = "dmic"; + assigned-clocks = <&tegra_car TEGRA210_CLK_DMIC1>; + assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_A_OUT0>; + assigned-clock-rates = <3072000>; + sound-name-prefix = "DMIC1"; + status = "disabled"; + }; + + tegra_dmic2: dmic@702d4100 { + compatible = "nvidia,tegra210-dmic"; + reg = <0x702d4100 0x100>; + clocks = <&tegra_car TEGRA210_CLK_DMIC2>; + clock-names = "dmic"; + assigned-clocks = <&tegra_car TEGRA210_CLK_DMIC2>; + assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_A_OUT0>; + assigned-clock-rates = <3072000>; + sound-name-prefix = "DMIC2"; + status = "disabled"; + }; + + tegra_dmic3: dmic@702d4200 { + compatible = "nvidia,tegra210-dmic"; + reg = <0x702d4200 0x100>; + clocks = <&tegra_car TEGRA210_CLK_DMIC3>; + clock-names = "dmic"; + assigned-clocks = <&tegra_car TEGRA210_CLK_DMIC3>; + assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_A_OUT0>; + assigned-clock-rates = <3072000>; + sound-name-prefix = "DMIC3"; + status = "disabled"; + }; + tegra_ope1: processing-engine@702d8000 { compatible = "nvidia,tegra210-ope"; reg = <0x702d8000 0x100>; @@ -1766,6 +1708,20 @@ }; }; + tegra_mvc1: mvc@702da000 { + compatible = "nvidia,tegra210-mvc"; + reg = <0x702da000 0x200>; + sound-name-prefix = "MVC1"; + status = "disabled"; + }; + + tegra_mvc2: mvc@702da200 { + compatible = "nvidia,tegra210-mvc"; + reg = <0x702da200 0x200>; + sound-name-prefix = "MVC2"; + status = "disabled"; + }; + tegra_amixer: amixer@702dbb00 { compatible = "nvidia,tegra210-amixer"; reg = <0x702dbb00 0x800>; @@ -1856,6 +1812,50 @@ }; }; }; + + adma: dma-controller@702e2000 { + compatible = "nvidia,tegra210-adma"; + reg = <0x702e2000 0x2000>; + interrupt-parent = <&agic>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + clocks = <&tegra_car TEGRA210_CLK_D_AUDIO>; + clock-names = "d_audio"; + status = "disabled"; + }; + + agic: interrupt-controller@702f9000 { + compatible = "nvidia,tegra210-agic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x702f9000 0x1000>, + <0x702fa000 0x2000>; + interrupts = <GIC_SPI 102 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&tegra_car TEGRA210_CLK_APE>; + clock-names = "clk"; + status = "disabled"; + }; }; spi@70410000 { diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3701-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3701-0000.dtsi index 8b86ea9cb50c..2378da324273 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234-p3701-0000.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3701-0000.dtsi @@ -6,42 +6,23 @@ model = "NVIDIA Jetson AGX Orin"; compatible = "nvidia,p3701-0000", "nvidia,tegra234"; - vdd_1v8_ls: regulator-vdd-1v8-ls { - compatible = "regulator-fixed"; - regulator-name = "VDD_1V8_LS"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - vdd_1v8_ao: regulator-vdd-1v8-ao { - compatible = "regulator-fixed"; - regulator-name = "VDD_1V8_AO"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; + bus@0 { + i2c@3160000 { + status = "okay"; - vdd_3v3_pcie: regulator-vdd-3v3-pcie { - compatible = "regulator-fixed"; - regulator-name = "VDD_3V3_PCIE"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio TEGRA234_MAIN_GPIO(Z, 2) GPIO_ACTIVE_HIGH>; - regulator-boot-on; - enable-active-high; - }; + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; - vdd_12v_pcie: regulator-vdd-12v-pcie { - compatible = "regulator-fixed"; - regulator-name = "VDD_12V_PCIE"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - gpio = <&gpio TEGRA234_MAIN_GPIO(A, 1) GPIO_ACTIVE_LOW>; - regulator-boot-on; - }; + label = "module"; + vcc-supply = <&vdd_1v8_hs>; + address-width = <8>; + pagesize = <8>; + size = <256>; + read-only; + }; + }; - bus@0 { spi@3270000 { status = "okay"; @@ -67,6 +48,29 @@ non-removable; }; + padctl@3520000 { + vclamp-usb-supply = <&vdd_1v8_ao>; + avdd-usb-supply = <&vdd_3v3_ao>; + + ports { + usb2-0 { + vbus-supply = <&vdd_5v0_sys>; + }; + + usb2-1 { + vbus-supply = <&vdd_5v0_sys>; + }; + + usb2-2 { + vbus-supply = <&vdd_5v0_sys>; + }; + + usb2-3 { + vbus-supply = <&vdd_5v0_sys>; + }; + }; + }; + rtc@c2a0000 { status = "okay"; }; @@ -75,4 +79,64 @@ nvidia,invert-interrupt; }; }; + + vdd_5v0_sys: regulator-vdd-5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "VIN_SYS_5V0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_1v8_ls: regulator-vdd-1v8-ls { + compatible = "regulator-fixed"; + regulator-name = "VDD_1V8_LS"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vdd_1v8_hs: regulator-vdd-1v8-hs { + compatible = "regulator-fixed"; + regulator-name = "VDD_1V8_HS"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vdd_1v8_ao: regulator-vdd-1v8-ao { + compatible = "regulator-fixed"; + regulator-name = "VDD_1V8_AO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vdd_3v3_ao: regulator-vdd-3v3-ao { + compatible = "regulator-fixed"; + regulator-name = "VDD_3V3_AO"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_3v3_pcie: regulator-vdd-3v3-pcie { + compatible = "regulator-fixed"; + regulator-name = "VDD_3V3_PCIE"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio TEGRA234_MAIN_GPIO(Z, 2) GPIO_ACTIVE_HIGH>; + regulator-boot-on; + enable-active-high; + }; + + vdd_12v_pcie: regulator-vdd-12v-pcie { + compatible = "regulator-fixed"; + regulator-name = "VDD_12V_PCIE"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + gpio = <&gpio TEGRA234_MAIN_GPIO(A, 1) GPIO_ACTIVE_LOW>; + regulator-boot-on; + }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts index 96aa2267b06d..8a9747855d6b 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts @@ -17,6 +17,11 @@ serial1 = &uarta; }; + chosen { + bootargs = "console=ttyTCU0,115200n8"; + stdout-path = "serial0:115200n8"; + }; + bus@0 { aconnect@2900000 { status = "okay"; @@ -24,867 +29,6 @@ ahub@2900800 { status = "okay"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0x0>; - - xbar_admaif0: endpoint { - remote-endpoint = <&admaif0>; - }; - }; - - port@1 { - reg = <0x1>; - - xbar_admaif1: endpoint { - remote-endpoint = <&admaif1>; - }; - }; - - port@2 { - reg = <0x2>; - - xbar_admaif2: endpoint { - remote-endpoint = <&admaif2>; - }; - }; - - port@3 { - reg = <0x3>; - - xbar_admaif3: endpoint { - remote-endpoint = <&admaif3>; - }; - }; - - port@4 { - reg = <0x4>; - - xbar_admaif4: endpoint { - remote-endpoint = <&admaif4>; - }; - }; - - port@5 { - reg = <0x5>; - - xbar_admaif5: endpoint { - remote-endpoint = <&admaif5>; - }; - }; - - port@6 { - reg = <0x6>; - - xbar_admaif6: endpoint { - remote-endpoint = <&admaif6>; - }; - }; - - port@7 { - reg = <0x7>; - - xbar_admaif7: endpoint { - remote-endpoint = <&admaif7>; - }; - }; - - port@8 { - reg = <0x8>; - - xbar_admaif8: endpoint { - remote-endpoint = <&admaif8>; - }; - }; - - port@9 { - reg = <0x9>; - - xbar_admaif9: endpoint { - remote-endpoint = <&admaif9>; - }; - }; - - port@a { - reg = <0xa>; - - xbar_admaif10: endpoint { - remote-endpoint = <&admaif10>; - }; - }; - - port@b { - reg = <0xb>; - - xbar_admaif11: endpoint { - remote-endpoint = <&admaif11>; - }; - }; - - port@c { - reg = <0xc>; - - xbar_admaif12: endpoint { - remote-endpoint = <&admaif12>; - }; - }; - - port@d { - reg = <0xd>; - - xbar_admaif13: endpoint { - remote-endpoint = <&admaif13>; - }; - }; - - port@e { - reg = <0xe>; - - xbar_admaif14: endpoint { - remote-endpoint = <&admaif14>; - }; - }; - - port@f { - reg = <0xf>; - - xbar_admaif15: endpoint { - remote-endpoint = <&admaif15>; - }; - }; - - port@10 { - reg = <0x10>; - - xbar_admaif16: endpoint { - remote-endpoint = <&admaif16>; - }; - }; - - port@11 { - reg = <0x11>; - - xbar_admaif17: endpoint { - remote-endpoint = <&admaif17>; - }; - }; - - port@12 { - reg = <0x12>; - - xbar_admaif18: endpoint { - remote-endpoint = <&admaif18>; - }; - }; - - port@13 { - reg = <0x13>; - - xbar_admaif19: endpoint { - remote-endpoint = <&admaif19>; - }; - }; - - xbar_i2s1_port: port@14 { - reg = <0x14>; - - xbar_i2s1: endpoint { - remote-endpoint = <&i2s1_cif>; - }; - }; - - xbar_i2s2_port: port@15 { - reg = <0x15>; - - xbar_i2s2: endpoint { - remote-endpoint = <&i2s2_cif>; - }; - }; - - xbar_i2s4_port: port@17 { - reg = <0x17>; - - xbar_i2s4: endpoint { - remote-endpoint = <&i2s4_cif>; - }; - }; - - xbar_i2s6_port: port@19 { - reg = <0x19>; - - xbar_i2s6: endpoint { - remote-endpoint = <&i2s6_cif>; - }; - }; - - xbar_dmic3_port: port@1c { - reg = <0x1c>; - - xbar_dmic3: endpoint { - remote-endpoint = <&dmic3_cif>; - }; - }; - - xbar_sfc1_in_port: port@20 { - reg = <0x20>; - - xbar_sfc1_in: endpoint { - remote-endpoint = <&sfc1_cif_in>; - }; - }; - - port@21 { - reg = <0x21>; - - xbar_sfc1_out: endpoint { - remote-endpoint = <&sfc1_cif_out>; - }; - }; - - xbar_sfc2_in_port: port@22 { - reg = <0x22>; - - xbar_sfc2_in: endpoint { - remote-endpoint = <&sfc2_cif_in>; - }; - }; - - port@23 { - reg = <0x23>; - - xbar_sfc2_out: endpoint { - remote-endpoint = <&sfc2_cif_out>; - }; - }; - - xbar_sfc3_in_port: port@24 { - reg = <0x24>; - - xbar_sfc3_in: endpoint { - remote-endpoint = <&sfc3_cif_in>; - }; - }; - - port@25 { - reg = <0x25>; - - xbar_sfc3_out: endpoint { - remote-endpoint = <&sfc3_cif_out>; - }; - }; - - xbar_sfc4_in_port: port@26 { - reg = <0x26>; - - xbar_sfc4_in: endpoint { - remote-endpoint = <&sfc4_cif_in>; - }; - }; - - port@27 { - reg = <0x27>; - - xbar_sfc4_out: endpoint { - remote-endpoint = <&sfc4_cif_out>; - }; - }; - - xbar_mvc1_in_port: port@28 { - reg = <0x28>; - - xbar_mvc1_in: endpoint { - remote-endpoint = <&mvc1_cif_in>; - }; - }; - - port@29 { - reg = <0x29>; - - xbar_mvc1_out: endpoint { - remote-endpoint = <&mvc1_cif_out>; - }; - }; - - xbar_mvc2_in_port: port@2a { - reg = <0x2a>; - - xbar_mvc2_in: endpoint { - remote-endpoint = <&mvc2_cif_in>; - }; - }; - - port@2b { - reg = <0x2b>; - - xbar_mvc2_out: endpoint { - remote-endpoint = <&mvc2_cif_out>; - }; - }; - - xbar_amx1_in1_port: port@2c { - reg = <0x2c>; - - xbar_amx1_in1: endpoint { - remote-endpoint = <&amx1_in1>; - }; - }; - - xbar_amx1_in2_port: port@2d { - reg = <0x2d>; - - xbar_amx1_in2: endpoint { - remote-endpoint = <&amx1_in2>; - }; - }; - - xbar_amx1_in3_port: port@2e { - reg = <0x2e>; - - xbar_amx1_in3: endpoint { - remote-endpoint = <&amx1_in3>; - }; - }; - - xbar_amx1_in4_port: port@2f { - reg = <0x2f>; - - xbar_amx1_in4: endpoint { - remote-endpoint = <&amx1_in4>; - }; - }; - - port@30 { - reg = <0x30>; - - xbar_amx1_out: endpoint { - remote-endpoint = <&amx1_out>; - }; - }; - - xbar_amx2_in1_port: port@31 { - reg = <0x31>; - - xbar_amx2_in1: endpoint { - remote-endpoint = <&amx2_in1>; - }; - }; - - xbar_amx2_in2_port: port@32 { - reg = <0x32>; - - xbar_amx2_in2: endpoint { - remote-endpoint = <&amx2_in2>; - }; - }; - - xbar_amx2_in3_port: port@33 { - reg = <0x33>; - - xbar_amx2_in3: endpoint { - remote-endpoint = <&amx2_in3>; - }; - }; - - xbar_amx2_in4_port: port@34 { - reg = <0x34>; - - xbar_amx2_in4: endpoint { - remote-endpoint = <&amx2_in4>; - }; - }; - - port@35 { - reg = <0x35>; - - xbar_amx2_out: endpoint { - remote-endpoint = <&amx2_out>; - }; - }; - - xbar_amx3_in1_port: port@36 { - reg = <0x36>; - - xbar_amx3_in1: endpoint { - remote-endpoint = <&amx3_in1>; - }; - }; - - xbar_amx3_in2_port: port@37 { - reg = <0x37>; - - xbar_amx3_in2: endpoint { - remote-endpoint = <&amx3_in2>; - }; - }; - - xbar_amx3_in3_port: port@38 { - reg = <0x38>; - - xbar_amx3_in3: endpoint { - remote-endpoint = <&amx3_in3>; - }; - }; - - xbar_amx3_in4_port: port@39 { - reg = <0x39>; - - xbar_amx3_in4: endpoint { - remote-endpoint = <&amx3_in4>; - }; - }; - - port@3a { - reg = <0x3a>; - - xbar_amx3_out: endpoint { - remote-endpoint = <&amx3_out>; - }; - }; - - xbar_amx4_in1_port: port@3b { - reg = <0x3b>; - - xbar_amx4_in1: endpoint { - remote-endpoint = <&amx4_in1>; - }; - }; - - xbar_amx4_in2_port: port@3c { - reg = <0x3c>; - - xbar_amx4_in2: endpoint { - remote-endpoint = <&amx4_in2>; - }; - }; - - xbar_amx4_in3_port: port@3d { - reg = <0x3d>; - - xbar_amx4_in3: endpoint { - remote-endpoint = <&amx4_in3>; - }; - }; - - xbar_amx4_in4_port: port@3e { - reg = <0x3e>; - - xbar_amx4_in4: endpoint { - remote-endpoint = <&amx4_in4>; - }; - }; - - port@3f { - reg = <0x3f>; - - xbar_amx4_out: endpoint { - remote-endpoint = <&amx4_out>; - }; - }; - - xbar_adx1_in_port: port@40 { - reg = <0x40>; - - xbar_adx1_in: endpoint { - remote-endpoint = <&adx1_in>; - }; - }; - - port@41 { - reg = <0x41>; - - xbar_adx1_out1: endpoint { - remote-endpoint = <&adx1_out1>; - }; - }; - - port@42 { - reg = <0x42>; - - xbar_adx1_out2: endpoint { - remote-endpoint = <&adx1_out2>; - }; - }; - - port@43 { - reg = <0x43>; - - xbar_adx1_out3: endpoint { - remote-endpoint = <&adx1_out3>; - }; - }; - - port@44 { - reg = <0x44>; - - xbar_adx1_out4: endpoint { - remote-endpoint = <&adx1_out4>; - }; - }; - - xbar_adx2_in_port: port@45 { - reg = <0x45>; - - xbar_adx2_in: endpoint { - remote-endpoint = <&adx2_in>; - }; - }; - - port@46 { - reg = <0x46>; - - xbar_adx2_out1: endpoint { - remote-endpoint = <&adx2_out1>; - }; - }; - - port@47 { - reg = <0x47>; - - xbar_adx2_out2: endpoint { - remote-endpoint = <&adx2_out2>; - }; - }; - - port@48 { - reg = <0x48>; - - xbar_adx2_out3: endpoint { - remote-endpoint = <&adx2_out3>; - }; - }; - - port@49 { - reg = <0x49>; - - xbar_adx2_out4: endpoint { - remote-endpoint = <&adx2_out4>; - }; - }; - - xbar_adx3_in_port: port@4a { - reg = <0x4a>; - - xbar_adx3_in: endpoint { - remote-endpoint = <&adx3_in>; - }; - }; - - port@4b { - reg = <0x4b>; - - xbar_adx3_out1: endpoint { - remote-endpoint = <&adx3_out1>; - }; - }; - - port@4c { - reg = <0x4c>; - - xbar_adx3_out2: endpoint { - remote-endpoint = <&adx3_out2>; - }; - }; - - port@4d { - reg = <0x4d>; - - xbar_adx3_out3: endpoint { - remote-endpoint = <&adx3_out3>; - }; - }; - - port@4e { - reg = <0x4e>; - - xbar_adx3_out4: endpoint { - remote-endpoint = <&adx3_out4>; - }; - }; - - xbar_adx4_in_port: port@4f { - reg = <0x4f>; - - xbar_adx4_in: endpoint { - remote-endpoint = <&adx4_in>; - }; - }; - - port@50 { - reg = <0x50>; - - xbar_adx4_out1: endpoint { - remote-endpoint = <&adx4_out1>; - }; - }; - - port@51 { - reg = <0x51>; - - xbar_adx4_out2: endpoint { - remote-endpoint = <&adx4_out2>; - }; - }; - - port@52 { - reg = <0x52>; - - xbar_adx4_out3: endpoint { - remote-endpoint = <&adx4_out3>; - }; - }; - - port@53 { - reg = <0x53>; - - xbar_adx4_out4: endpoint { - remote-endpoint = <&adx4_out4>; - }; - }; - - xbar_mix_in1_port: port@54 { - reg = <0x54>; - - xbar_mix_in1: endpoint { - remote-endpoint = <&mix_in1>; - }; - }; - - xbar_mix_in2_port: port@55 { - reg = <0x55>; - - xbar_mix_in2: endpoint { - remote-endpoint = <&mix_in2>; - }; - }; - - xbar_mix_in3_port: port@56 { - reg = <0x56>; - - xbar_mix_in3: endpoint { - remote-endpoint = <&mix_in3>; - }; - }; - - xbar_mix_in4_port: port@57 { - reg = <0x57>; - - xbar_mix_in4: endpoint { - remote-endpoint = <&mix_in4>; - }; - }; - - xbar_mix_in5_port: port@58 { - reg = <0x58>; - - xbar_mix_in5: endpoint { - remote-endpoint = <&mix_in5>; - }; - }; - - xbar_mix_in6_port: port@59 { - reg = <0x59>; - - xbar_mix_in6: endpoint { - remote-endpoint = <&mix_in6>; - }; - }; - - xbar_mix_in7_port: port@5a { - reg = <0x5a>; - - xbar_mix_in7: endpoint { - remote-endpoint = <&mix_in7>; - }; - }; - - xbar_mix_in8_port: port@5b { - reg = <0x5b>; - - xbar_mix_in8: endpoint { - remote-endpoint = <&mix_in8>; - }; - }; - - xbar_mix_in9_port: port@5c { - reg = <0x5c>; - - xbar_mix_in9: endpoint { - remote-endpoint = <&mix_in9>; - }; - }; - - xbar_mix_in10_port: port@5d { - reg = <0x5d>; - - xbar_mix_in10: endpoint { - remote-endpoint = <&mix_in10>; - }; - }; - - port@5e { - reg = <0x5e>; - - xbar_mix_out1: endpoint { - remote-endpoint = <&mix_out1>; - }; - }; - - port@5f { - reg = <0x5f>; - - xbar_mix_out2: endpoint { - remote-endpoint = <&mix_out2>; - }; - }; - - port@60 { - reg = <0x60>; - - xbar_mix_out3: endpoint { - remote-endpoint = <&mix_out3>; - }; - }; - - port@61 { - reg = <0x61>; - - xbar_mix_out4: endpoint { - remote-endpoint = <&mix_out4>; - }; - }; - - port@62 { - reg = <0x62>; - - xbar_mix_out5: endpoint { - remote-endpoint = <&mix_out5>; - }; - }; - - xbar_asrc_in1_port: port@63 { - reg = <0x63>; - - xbar_asrc_in1_ep: endpoint { - remote-endpoint = <&asrc_in1_ep>; - }; - }; - - port@64 { - reg = <0x64>; - - xbar_asrc_out1_ep: endpoint { - remote-endpoint = <&asrc_out1_ep>; - }; - }; - - xbar_asrc_in2_port: port@65 { - reg = <0x65>; - - xbar_asrc_in2_ep: endpoint { - remote-endpoint = <&asrc_in2_ep>; - }; - }; - - port@66 { - reg = <0x66>; - - xbar_asrc_out2_ep: endpoint { - remote-endpoint = <&asrc_out2_ep>; - }; - }; - - xbar_asrc_in3_port: port@67 { - reg = <0x67>; - - xbar_asrc_in3_ep: endpoint { - remote-endpoint = <&asrc_in3_ep>; - }; - }; - - port@68 { - reg = <0x68>; - - xbar_asrc_out3_ep: endpoint { - remote-endpoint = <&asrc_out3_ep>; - }; - }; - - xbar_asrc_in4_port: port@69 { - reg = <0x69>; - - xbar_asrc_in4_ep: endpoint { - remote-endpoint = <&asrc_in4_ep>; - }; - }; - - port@6a { - reg = <0x6a>; - - xbar_asrc_out4_ep: endpoint { - remote-endpoint = <&asrc_out4_ep>; - }; - }; - - xbar_asrc_in5_port: port@6b { - reg = <0x6b>; - - xbar_asrc_in5_ep: endpoint { - remote-endpoint = <&asrc_in5_ep>; - }; - }; - - port@6c { - reg = <0x6c>; - - xbar_asrc_out5_ep: endpoint { - remote-endpoint = <&asrc_out5_ep>; - }; - }; - - xbar_asrc_in6_port: port@6d { - reg = <0x6d>; - - xbar_asrc_in6_ep: endpoint { - remote-endpoint = <&asrc_in6_ep>; - }; - }; - - port@6e { - reg = <0x6e>; - - xbar_asrc_out6_ep: endpoint { - remote-endpoint = <&asrc_out6_ep>; - }; - }; - - xbar_asrc_in7_port: port@6f { - reg = <0x6f>; - - xbar_asrc_in7_ep: endpoint { - remote-endpoint = <&asrc_in7_ep>; - }; - }; - - xbar_ope1_in_port: port@70 { - reg = <0x70>; - - xbar_ope1_in_ep: endpoint { - remote-endpoint = <&ope1_cif_in_ep>; - }; - }; - - port@71 { - reg = <0x71>; - - xbar_ope1_out_ep: endpoint { - remote-endpoint = <&ope1_cif_out_ep>; - }; - }; - }; - i2s@2901000 { status = "okay"; @@ -1991,6 +1135,867 @@ }; }; }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + + xbar_admaif0: endpoint { + remote-endpoint = <&admaif0>; + }; + }; + + port@1 { + reg = <0x1>; + + xbar_admaif1: endpoint { + remote-endpoint = <&admaif1>; + }; + }; + + port@2 { + reg = <0x2>; + + xbar_admaif2: endpoint { + remote-endpoint = <&admaif2>; + }; + }; + + port@3 { + reg = <0x3>; + + xbar_admaif3: endpoint { + remote-endpoint = <&admaif3>; + }; + }; + + port@4 { + reg = <0x4>; + + xbar_admaif4: endpoint { + remote-endpoint = <&admaif4>; + }; + }; + + port@5 { + reg = <0x5>; + + xbar_admaif5: endpoint { + remote-endpoint = <&admaif5>; + }; + }; + + port@6 { + reg = <0x6>; + + xbar_admaif6: endpoint { + remote-endpoint = <&admaif6>; + }; + }; + + port@7 { + reg = <0x7>; + + xbar_admaif7: endpoint { + remote-endpoint = <&admaif7>; + }; + }; + + port@8 { + reg = <0x8>; + + xbar_admaif8: endpoint { + remote-endpoint = <&admaif8>; + }; + }; + + port@9 { + reg = <0x9>; + + xbar_admaif9: endpoint { + remote-endpoint = <&admaif9>; + }; + }; + + port@a { + reg = <0xa>; + + xbar_admaif10: endpoint { + remote-endpoint = <&admaif10>; + }; + }; + + port@b { + reg = <0xb>; + + xbar_admaif11: endpoint { + remote-endpoint = <&admaif11>; + }; + }; + + port@c { + reg = <0xc>; + + xbar_admaif12: endpoint { + remote-endpoint = <&admaif12>; + }; + }; + + port@d { + reg = <0xd>; + + xbar_admaif13: endpoint { + remote-endpoint = <&admaif13>; + }; + }; + + port@e { + reg = <0xe>; + + xbar_admaif14: endpoint { + remote-endpoint = <&admaif14>; + }; + }; + + port@f { + reg = <0xf>; + + xbar_admaif15: endpoint { + remote-endpoint = <&admaif15>; + }; + }; + + port@10 { + reg = <0x10>; + + xbar_admaif16: endpoint { + remote-endpoint = <&admaif16>; + }; + }; + + port@11 { + reg = <0x11>; + + xbar_admaif17: endpoint { + remote-endpoint = <&admaif17>; + }; + }; + + port@12 { + reg = <0x12>; + + xbar_admaif18: endpoint { + remote-endpoint = <&admaif18>; + }; + }; + + port@13 { + reg = <0x13>; + + xbar_admaif19: endpoint { + remote-endpoint = <&admaif19>; + }; + }; + + xbar_i2s1_port: port@14 { + reg = <0x14>; + + xbar_i2s1: endpoint { + remote-endpoint = <&i2s1_cif>; + }; + }; + + xbar_i2s2_port: port@15 { + reg = <0x15>; + + xbar_i2s2: endpoint { + remote-endpoint = <&i2s2_cif>; + }; + }; + + xbar_i2s4_port: port@17 { + reg = <0x17>; + + xbar_i2s4: endpoint { + remote-endpoint = <&i2s4_cif>; + }; + }; + + xbar_i2s6_port: port@19 { + reg = <0x19>; + + xbar_i2s6: endpoint { + remote-endpoint = <&i2s6_cif>; + }; + }; + + xbar_dmic3_port: port@1c { + reg = <0x1c>; + + xbar_dmic3: endpoint { + remote-endpoint = <&dmic3_cif>; + }; + }; + + xbar_sfc1_in_port: port@20 { + reg = <0x20>; + + xbar_sfc1_in: endpoint { + remote-endpoint = <&sfc1_cif_in>; + }; + }; + + port@21 { + reg = <0x21>; + + xbar_sfc1_out: endpoint { + remote-endpoint = <&sfc1_cif_out>; + }; + }; + + xbar_sfc2_in_port: port@22 { + reg = <0x22>; + + xbar_sfc2_in: endpoint { + remote-endpoint = <&sfc2_cif_in>; + }; + }; + + port@23 { + reg = <0x23>; + + xbar_sfc2_out: endpoint { + remote-endpoint = <&sfc2_cif_out>; + }; + }; + + xbar_sfc3_in_port: port@24 { + reg = <0x24>; + + xbar_sfc3_in: endpoint { + remote-endpoint = <&sfc3_cif_in>; + }; + }; + + port@25 { + reg = <0x25>; + + xbar_sfc3_out: endpoint { + remote-endpoint = <&sfc3_cif_out>; + }; + }; + + xbar_sfc4_in_port: port@26 { + reg = <0x26>; + + xbar_sfc4_in: endpoint { + remote-endpoint = <&sfc4_cif_in>; + }; + }; + + port@27 { + reg = <0x27>; + + xbar_sfc4_out: endpoint { + remote-endpoint = <&sfc4_cif_out>; + }; + }; + + xbar_mvc1_in_port: port@28 { + reg = <0x28>; + + xbar_mvc1_in: endpoint { + remote-endpoint = <&mvc1_cif_in>; + }; + }; + + port@29 { + reg = <0x29>; + + xbar_mvc1_out: endpoint { + remote-endpoint = <&mvc1_cif_out>; + }; + }; + + xbar_mvc2_in_port: port@2a { + reg = <0x2a>; + + xbar_mvc2_in: endpoint { + remote-endpoint = <&mvc2_cif_in>; + }; + }; + + port@2b { + reg = <0x2b>; + + xbar_mvc2_out: endpoint { + remote-endpoint = <&mvc2_cif_out>; + }; + }; + + xbar_amx1_in1_port: port@2c { + reg = <0x2c>; + + xbar_amx1_in1: endpoint { + remote-endpoint = <&amx1_in1>; + }; + }; + + xbar_amx1_in2_port: port@2d { + reg = <0x2d>; + + xbar_amx1_in2: endpoint { + remote-endpoint = <&amx1_in2>; + }; + }; + + xbar_amx1_in3_port: port@2e { + reg = <0x2e>; + + xbar_amx1_in3: endpoint { + remote-endpoint = <&amx1_in3>; + }; + }; + + xbar_amx1_in4_port: port@2f { + reg = <0x2f>; + + xbar_amx1_in4: endpoint { + remote-endpoint = <&amx1_in4>; + }; + }; + + port@30 { + reg = <0x30>; + + xbar_amx1_out: endpoint { + remote-endpoint = <&amx1_out>; + }; + }; + + xbar_amx2_in1_port: port@31 { + reg = <0x31>; + + xbar_amx2_in1: endpoint { + remote-endpoint = <&amx2_in1>; + }; + }; + + xbar_amx2_in2_port: port@32 { + reg = <0x32>; + + xbar_amx2_in2: endpoint { + remote-endpoint = <&amx2_in2>; + }; + }; + + xbar_amx2_in3_port: port@33 { + reg = <0x33>; + + xbar_amx2_in3: endpoint { + remote-endpoint = <&amx2_in3>; + }; + }; + + xbar_amx2_in4_port: port@34 { + reg = <0x34>; + + xbar_amx2_in4: endpoint { + remote-endpoint = <&amx2_in4>; + }; + }; + + port@35 { + reg = <0x35>; + + xbar_amx2_out: endpoint { + remote-endpoint = <&amx2_out>; + }; + }; + + xbar_amx3_in1_port: port@36 { + reg = <0x36>; + + xbar_amx3_in1: endpoint { + remote-endpoint = <&amx3_in1>; + }; + }; + + xbar_amx3_in2_port: port@37 { + reg = <0x37>; + + xbar_amx3_in2: endpoint { + remote-endpoint = <&amx3_in2>; + }; + }; + + xbar_amx3_in3_port: port@38 { + reg = <0x38>; + + xbar_amx3_in3: endpoint { + remote-endpoint = <&amx3_in3>; + }; + }; + + xbar_amx3_in4_port: port@39 { + reg = <0x39>; + + xbar_amx3_in4: endpoint { + remote-endpoint = <&amx3_in4>; + }; + }; + + port@3a { + reg = <0x3a>; + + xbar_amx3_out: endpoint { + remote-endpoint = <&amx3_out>; + }; + }; + + xbar_amx4_in1_port: port@3b { + reg = <0x3b>; + + xbar_amx4_in1: endpoint { + remote-endpoint = <&amx4_in1>; + }; + }; + + xbar_amx4_in2_port: port@3c { + reg = <0x3c>; + + xbar_amx4_in2: endpoint { + remote-endpoint = <&amx4_in2>; + }; + }; + + xbar_amx4_in3_port: port@3d { + reg = <0x3d>; + + xbar_amx4_in3: endpoint { + remote-endpoint = <&amx4_in3>; + }; + }; + + xbar_amx4_in4_port: port@3e { + reg = <0x3e>; + + xbar_amx4_in4: endpoint { + remote-endpoint = <&amx4_in4>; + }; + }; + + port@3f { + reg = <0x3f>; + + xbar_amx4_out: endpoint { + remote-endpoint = <&amx4_out>; + }; + }; + + xbar_adx1_in_port: port@40 { + reg = <0x40>; + + xbar_adx1_in: endpoint { + remote-endpoint = <&adx1_in>; + }; + }; + + port@41 { + reg = <0x41>; + + xbar_adx1_out1: endpoint { + remote-endpoint = <&adx1_out1>; + }; + }; + + port@42 { + reg = <0x42>; + + xbar_adx1_out2: endpoint { + remote-endpoint = <&adx1_out2>; + }; + }; + + port@43 { + reg = <0x43>; + + xbar_adx1_out3: endpoint { + remote-endpoint = <&adx1_out3>; + }; + }; + + port@44 { + reg = <0x44>; + + xbar_adx1_out4: endpoint { + remote-endpoint = <&adx1_out4>; + }; + }; + + xbar_adx2_in_port: port@45 { + reg = <0x45>; + + xbar_adx2_in: endpoint { + remote-endpoint = <&adx2_in>; + }; + }; + + port@46 { + reg = <0x46>; + + xbar_adx2_out1: endpoint { + remote-endpoint = <&adx2_out1>; + }; + }; + + port@47 { + reg = <0x47>; + + xbar_adx2_out2: endpoint { + remote-endpoint = <&adx2_out2>; + }; + }; + + port@48 { + reg = <0x48>; + + xbar_adx2_out3: endpoint { + remote-endpoint = <&adx2_out3>; + }; + }; + + port@49 { + reg = <0x49>; + + xbar_adx2_out4: endpoint { + remote-endpoint = <&adx2_out4>; + }; + }; + + xbar_adx3_in_port: port@4a { + reg = <0x4a>; + + xbar_adx3_in: endpoint { + remote-endpoint = <&adx3_in>; + }; + }; + + port@4b { + reg = <0x4b>; + + xbar_adx3_out1: endpoint { + remote-endpoint = <&adx3_out1>; + }; + }; + + port@4c { + reg = <0x4c>; + + xbar_adx3_out2: endpoint { + remote-endpoint = <&adx3_out2>; + }; + }; + + port@4d { + reg = <0x4d>; + + xbar_adx3_out3: endpoint { + remote-endpoint = <&adx3_out3>; + }; + }; + + port@4e { + reg = <0x4e>; + + xbar_adx3_out4: endpoint { + remote-endpoint = <&adx3_out4>; + }; + }; + + xbar_adx4_in_port: port@4f { + reg = <0x4f>; + + xbar_adx4_in: endpoint { + remote-endpoint = <&adx4_in>; + }; + }; + + port@50 { + reg = <0x50>; + + xbar_adx4_out1: endpoint { + remote-endpoint = <&adx4_out1>; + }; + }; + + port@51 { + reg = <0x51>; + + xbar_adx4_out2: endpoint { + remote-endpoint = <&adx4_out2>; + }; + }; + + port@52 { + reg = <0x52>; + + xbar_adx4_out3: endpoint { + remote-endpoint = <&adx4_out3>; + }; + }; + + port@53 { + reg = <0x53>; + + xbar_adx4_out4: endpoint { + remote-endpoint = <&adx4_out4>; + }; + }; + + xbar_mix_in1_port: port@54 { + reg = <0x54>; + + xbar_mix_in1: endpoint { + remote-endpoint = <&mix_in1>; + }; + }; + + xbar_mix_in2_port: port@55 { + reg = <0x55>; + + xbar_mix_in2: endpoint { + remote-endpoint = <&mix_in2>; + }; + }; + + xbar_mix_in3_port: port@56 { + reg = <0x56>; + + xbar_mix_in3: endpoint { + remote-endpoint = <&mix_in3>; + }; + }; + + xbar_mix_in4_port: port@57 { + reg = <0x57>; + + xbar_mix_in4: endpoint { + remote-endpoint = <&mix_in4>; + }; + }; + + xbar_mix_in5_port: port@58 { + reg = <0x58>; + + xbar_mix_in5: endpoint { + remote-endpoint = <&mix_in5>; + }; + }; + + xbar_mix_in6_port: port@59 { + reg = <0x59>; + + xbar_mix_in6: endpoint { + remote-endpoint = <&mix_in6>; + }; + }; + + xbar_mix_in7_port: port@5a { + reg = <0x5a>; + + xbar_mix_in7: endpoint { + remote-endpoint = <&mix_in7>; + }; + }; + + xbar_mix_in8_port: port@5b { + reg = <0x5b>; + + xbar_mix_in8: endpoint { + remote-endpoint = <&mix_in8>; + }; + }; + + xbar_mix_in9_port: port@5c { + reg = <0x5c>; + + xbar_mix_in9: endpoint { + remote-endpoint = <&mix_in9>; + }; + }; + + xbar_mix_in10_port: port@5d { + reg = <0x5d>; + + xbar_mix_in10: endpoint { + remote-endpoint = <&mix_in10>; + }; + }; + + port@5e { + reg = <0x5e>; + + xbar_mix_out1: endpoint { + remote-endpoint = <&mix_out1>; + }; + }; + + port@5f { + reg = <0x5f>; + + xbar_mix_out2: endpoint { + remote-endpoint = <&mix_out2>; + }; + }; + + port@60 { + reg = <0x60>; + + xbar_mix_out3: endpoint { + remote-endpoint = <&mix_out3>; + }; + }; + + port@61 { + reg = <0x61>; + + xbar_mix_out4: endpoint { + remote-endpoint = <&mix_out4>; + }; + }; + + port@62 { + reg = <0x62>; + + xbar_mix_out5: endpoint { + remote-endpoint = <&mix_out5>; + }; + }; + + xbar_asrc_in1_port: port@63 { + reg = <0x63>; + + xbar_asrc_in1_ep: endpoint { + remote-endpoint = <&asrc_in1_ep>; + }; + }; + + port@64 { + reg = <0x64>; + + xbar_asrc_out1_ep: endpoint { + remote-endpoint = <&asrc_out1_ep>; + }; + }; + + xbar_asrc_in2_port: port@65 { + reg = <0x65>; + + xbar_asrc_in2_ep: endpoint { + remote-endpoint = <&asrc_in2_ep>; + }; + }; + + port@66 { + reg = <0x66>; + + xbar_asrc_out2_ep: endpoint { + remote-endpoint = <&asrc_out2_ep>; + }; + }; + + xbar_asrc_in3_port: port@67 { + reg = <0x67>; + + xbar_asrc_in3_ep: endpoint { + remote-endpoint = <&asrc_in3_ep>; + }; + }; + + port@68 { + reg = <0x68>; + + xbar_asrc_out3_ep: endpoint { + remote-endpoint = <&asrc_out3_ep>; + }; + }; + + xbar_asrc_in4_port: port@69 { + reg = <0x69>; + + xbar_asrc_in4_ep: endpoint { + remote-endpoint = <&asrc_in4_ep>; + }; + }; + + port@6a { + reg = <0x6a>; + + xbar_asrc_out4_ep: endpoint { + remote-endpoint = <&asrc_out4_ep>; + }; + }; + + xbar_asrc_in5_port: port@6b { + reg = <0x6b>; + + xbar_asrc_in5_ep: endpoint { + remote-endpoint = <&asrc_in5_ep>; + }; + }; + + port@6c { + reg = <0x6c>; + + xbar_asrc_out5_ep: endpoint { + remote-endpoint = <&asrc_out5_ep>; + }; + }; + + xbar_asrc_in6_port: port@6d { + reg = <0x6d>; + + xbar_asrc_in6_ep: endpoint { + remote-endpoint = <&asrc_in6_ep>; + }; + }; + + port@6e { + reg = <0x6e>; + + xbar_asrc_out6_ep: endpoint { + remote-endpoint = <&asrc_out6_ep>; + }; + }; + + xbar_asrc_in7_port: port@6f { + reg = <0x6f>; + + xbar_asrc_in7_ep: endpoint { + remote-endpoint = <&asrc_in7_ep>; + }; + }; + + xbar_ope1_in_port: port@70 { + reg = <0x70>; + + xbar_ope1_in_ep: endpoint { + remote-endpoint = <&ope1_cif_in_ep>; + }; + }; + + port@71 { + reg = <0x71>; + + xbar_ope1_out_ep: endpoint { + remote-endpoint = <&ope1_cif_out_ep>; + }; + }; + }; }; dma-controller@2930000 { @@ -2022,14 +2027,100 @@ nvidia,model = "NVIDIA Jetson AGX Orin HDA"; status = "okay"; }; - }; - chosen { - bootargs = "console=ttyTCU0,115200n8"; - stdout-path = "serial0:115200n8"; - }; + padctl@3520000 { + status = "okay"; + + pads { + usb2 { + lanes { + usb2-0 { + status = "okay"; + }; + + usb2-1 { + status = "okay"; + }; + + usb2-2 { + status = "okay"; + }; + + usb2-3 { + status = "okay"; + }; + }; + }; + + usb3 { + lanes { + usb3-0 { + status = "okay"; + }; + + usb3-1 { + status = "okay"; + }; + + usb3-2 { + status = "okay"; + }; + }; + }; + }; + + ports { + usb2-0 { + mode = "host"; + status = "okay"; + }; + + usb2-1 { + mode = "host"; + status = "okay"; + }; + + usb2-2 { + mode = "host"; + status = "okay"; + }; + + usb2-3 { + mode = "host"; + status = "okay"; + }; + + usb3-0 { + nvidia,usb2-companion = <1>; + status = "okay"; + }; + + usb3-1 { + nvidia,usb2-companion = <0>; + status = "okay"; + }; + + usb3-2 { + nvidia,usb2-companion = <3>; + status = "okay"; + }; + }; + }; + + usb@3610000 { + status = "okay"; + + phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>, + <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-1}>, + <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-2}>, + <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-3}>, + <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-0}>, + <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-1}>, + <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-2}>; + phy-names = "usb2-0", "usb2-1", "usb2-2", "usb2-3", + "usb3-0", "usb3-1", "usb3-2"; + }; - bus@0 { ethernet@6800000 { status = "okay"; @@ -2048,6 +2139,57 @@ }; }; }; + + pcie@14100000 { + status = "okay"; + + vddio-pex-ctl-supply = <&vdd_1v8_ao>; + + phys = <&p2u_hsio_3>; + phy-names = "p2u-0"; + }; + + pcie@14160000 { + status = "okay"; + + vddio-pex-ctl-supply = <&vdd_1v8_ao>; + + phys = <&p2u_hsio_4>, <&p2u_hsio_5>, <&p2u_hsio_6>, + <&p2u_hsio_7>; + phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3"; + }; + + pcie@141a0000 { + status = "okay"; + + vddio-pex-ctl-supply = <&vdd_1v8_ls>; + vpcie3v3-supply = <&vdd_3v3_pcie>; + vpcie12v-supply = <&vdd_12v_pcie>; + + phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>, + <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>, + <&p2u_nvhs_6>, <&p2u_nvhs_7>; + phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4", + "p2u-5", "p2u-6", "p2u-7"; + }; + + pcie-ep@141a0000 { + status = "disabled"; + + vddio-pex-ctl-supply = <&vdd_1v8_ls>; + + reset-gpios = <&gpio TEGRA234_MAIN_GPIO(AF, 1) GPIO_ACTIVE_LOW>; + + nvidia,refclk-select-gpios = <&gpio_aon + TEGRA234_AON_GPIO(AA, 4) + GPIO_ACTIVE_HIGH>; + + phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>, + <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>, + <&p2u_nvhs_6>, <&p2u_nvhs_7>; + phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4", + "p2u-5", "p2u-6", "p2u-7"; + }; }; gpio-keys { @@ -2078,6 +2220,14 @@ }; }; + pwm-fan { + compatible = "pwm-fan"; + pwms = <&pwm3 0 45334>; + + cooling-levels = <0 95 178 255>; + #cooling-cells = <2>; + }; + serial { status = "okay"; }; @@ -2144,63 +2294,4 @@ label = "NVIDIA Jetson AGX Orin APE"; }; - - pcie@14100000 { - status = "okay"; - - vddio-pex-ctl-supply = <&vdd_1v8_ao>; - - phys = <&p2u_hsio_3>; - phy-names = "p2u-0"; - }; - - pcie@14160000 { - status = "okay"; - - vddio-pex-ctl-supply = <&vdd_1v8_ao>; - - phys = <&p2u_hsio_4>, <&p2u_hsio_5>, <&p2u_hsio_6>, - <&p2u_hsio_7>; - phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3"; - }; - - pcie@141a0000 { - status = "okay"; - - vddio-pex-ctl-supply = <&vdd_1v8_ls>; - vpcie3v3-supply = <&vdd_3v3_pcie>; - vpcie12v-supply = <&vdd_12v_pcie>; - - phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>, - <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>, - <&p2u_nvhs_6>, <&p2u_nvhs_7>; - phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4", - "p2u-5", "p2u-6", "p2u-7"; - }; - - pcie-ep@141a0000 { - status = "disabled"; - - vddio-pex-ctl-supply = <&vdd_1v8_ls>; - - reset-gpios = <&gpio TEGRA234_MAIN_GPIO(AF, 1) GPIO_ACTIVE_LOW>; - - nvidia,refclk-select-gpios = <&gpio_aon - TEGRA234_AON_GPIO(AA, 4) - GPIO_ACTIVE_HIGH>; - - phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>, - <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>, - <&p2u_nvhs_6>, <&p2u_nvhs_7>; - phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4", - "p2u-5", "p2u-6", "p2u-7"; - }; - - pwm-fan { - compatible = "pwm-fan"; - pwms = <&pwm3 0 45334>; - - cooling-levels = <0 95 178 255>; - #cooling-cells = <2>; - }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000.dtsi index e76894574d32..022a5408d869 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000.dtsi @@ -4,6 +4,22 @@ compatible = "nvidia,p3737-0000"; bus@0 { + i2c@3160000 { + status = "okay"; + + eeprom@56 { + compatible = "atmel,24c02"; + reg = <0x56>; + + label = "system"; + vcc-supply = <&vdd_1v8_sys>; + address-width = <8>; + pagesize = <8>; + size = <256>; + read-only; + }; + }; + pwm@3280000 { status = "okay"; }; @@ -16,4 +32,12 @@ status = "okay"; }; }; + + vdd_1v8_sys: regulator-vdd-1v8-sys { + compatible = "regulator-fixed"; + regulator-name = "VDD_1V8_SYS"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra234.dtsi b/arch/arm64/boot/dts/nvidia/tegra234.dtsi index eaf05ee9acd1..8fe8eda7654d 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra234.dtsi @@ -5,9 +5,9 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/mailbox/tegra186-hsp.h> #include <dt-bindings/memory/tegra234-mc.h> +#include <dt-bindings/pinctrl/pinctrl-tegra-io-pad.h> #include <dt-bindings/power/tegra234-powergate.h> #include <dt-bindings/reset/tegra234-reset.h> -#include <dt-bindings/pinctrl/pinctrl-tegra-io-pad.h> / { compatible = "nvidia,tegra234"; @@ -17,15 +17,103 @@ bus@0 { compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x0 0x0 0x40000000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x0 0x0 0x40000000>; + + misc@100000 { + compatible = "nvidia,tegra234-misc"; + reg = <0x0 0x00100000 0x0 0xf000>, + <0x0 0x0010f000 0x0 0x1000>; + status = "okay"; + }; + + timer@2080000 { + compatible = "nvidia,tegra234-timer"; + reg = <0x0 0x02080000 0x0 0x00121000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + status = "okay"; + }; + + gpio: gpio@2200000 { + compatible = "nvidia,tegra234-gpio"; + reg-names = "security", "gpio"; + reg = <0x0 0x02200000 0x0 0x10000>, + <0x0 0x02210000 0x0 0x10000>; + interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 291 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; + interrupt-controller; + #gpio-cells = <2>; + gpio-controller; + }; gpcdma: dma-controller@2600000 { compatible = "nvidia,tegra234-gpcdma", "nvidia,tegra186-gpcdma"; - reg = <0x2600000 0x210000>; + reg = <0x0 0x2600000 0x0 0x210000>; resets = <&bpmp TEGRA234_RESET_GPCDMA>; reset-names = "gpcdma"; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>, @@ -73,27 +161,29 @@ <&bpmp TEGRA234_CLK_APB2APE>; clock-names = "ape", "apb2ape"; power-domains = <&bpmp TEGRA234_POWER_DOMAIN_AUD>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x02900000 0x02900000 0x200000>; status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x02900000 0x0 0x02900000 0x0 0x200000>; + tegra_ahub: ahub@2900800 { compatible = "nvidia,tegra234-ahub"; - reg = <0x02900800 0x800>; + reg = <0x0 0x02900800 0x0 0x800>; clocks = <&bpmp TEGRA234_CLK_AHUB>; clock-names = "ahub"; assigned-clocks = <&bpmp TEGRA234_CLK_AHUB>; assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLA_OUT0>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x02900800 0x02900800 0x11800>; status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x02900800 0x0 0x02900800 0x0 0x11800>; + tegra_i2s1: i2s@2901000 { compatible = "nvidia,tegra234-i2s", "nvidia,tegra210-i2s"; - reg = <0x2901000 0x100>; + reg = <0x0 0x2901000 0x0 0x100>; clocks = <&bpmp TEGRA234_CLK_I2S1>, <&bpmp TEGRA234_CLK_I2S1_SYNC_INPUT>; clock-names = "i2s", "sync_input"; @@ -107,7 +197,7 @@ tegra_i2s2: i2s@2901100 { compatible = "nvidia,tegra234-i2s", "nvidia,tegra210-i2s"; - reg = <0x2901100 0x100>; + reg = <0x0 0x2901100 0x0 0x100>; clocks = <&bpmp TEGRA234_CLK_I2S2>, <&bpmp TEGRA234_CLK_I2S2_SYNC_INPUT>; clock-names = "i2s", "sync_input"; @@ -121,7 +211,7 @@ tegra_i2s3: i2s@2901200 { compatible = "nvidia,tegra234-i2s", "nvidia,tegra210-i2s"; - reg = <0x2901200 0x100>; + reg = <0x0 0x2901200 0x0 0x100>; clocks = <&bpmp TEGRA234_CLK_I2S3>, <&bpmp TEGRA234_CLK_I2S3_SYNC_INPUT>; clock-names = "i2s", "sync_input"; @@ -135,7 +225,7 @@ tegra_i2s4: i2s@2901300 { compatible = "nvidia,tegra234-i2s", "nvidia,tegra210-i2s"; - reg = <0x2901300 0x100>; + reg = <0x0 0x2901300 0x0 0x100>; clocks = <&bpmp TEGRA234_CLK_I2S4>, <&bpmp TEGRA234_CLK_I2S4_SYNC_INPUT>; clock-names = "i2s", "sync_input"; @@ -149,7 +239,7 @@ tegra_i2s5: i2s@2901400 { compatible = "nvidia,tegra234-i2s", "nvidia,tegra210-i2s"; - reg = <0x2901400 0x100>; + reg = <0x0 0x2901400 0x0 0x100>; clocks = <&bpmp TEGRA234_CLK_I2S5>, <&bpmp TEGRA234_CLK_I2S5_SYNC_INPUT>; clock-names = "i2s", "sync_input"; @@ -163,7 +253,7 @@ tegra_i2s6: i2s@2901500 { compatible = "nvidia,tegra234-i2s", "nvidia,tegra210-i2s"; - reg = <0x2901500 0x100>; + reg = <0x0 0x2901500 0x0 0x100>; clocks = <&bpmp TEGRA234_CLK_I2S6>, <&bpmp TEGRA234_CLK_I2S6_SYNC_INPUT>; clock-names = "i2s", "sync_input"; @@ -177,7 +267,7 @@ tegra_sfc1: sfc@2902000 { compatible = "nvidia,tegra234-sfc", "nvidia,tegra210-sfc"; - reg = <0x2902000 0x200>; + reg = <0x0 0x2902000 0x0 0x200>; sound-name-prefix = "SFC1"; status = "disabled"; }; @@ -185,7 +275,7 @@ tegra_sfc2: sfc@2902200 { compatible = "nvidia,tegra234-sfc", "nvidia,tegra210-sfc"; - reg = <0x2902200 0x200>; + reg = <0x0 0x2902200 0x0 0x200>; sound-name-prefix = "SFC2"; status = "disabled"; }; @@ -193,7 +283,7 @@ tegra_sfc3: sfc@2902400 { compatible = "nvidia,tegra234-sfc", "nvidia,tegra210-sfc"; - reg = <0x2902400 0x200>; + reg = <0x0 0x2902400 0x0 0x200>; sound-name-prefix = "SFC3"; status = "disabled"; }; @@ -201,7 +291,7 @@ tegra_sfc4: sfc@2902600 { compatible = "nvidia,tegra234-sfc", "nvidia,tegra210-sfc"; - reg = <0x2902600 0x200>; + reg = <0x0 0x2902600 0x0 0x200>; sound-name-prefix = "SFC4"; status = "disabled"; }; @@ -209,7 +299,7 @@ tegra_amx1: amx@2903000 { compatible = "nvidia,tegra234-amx", "nvidia,tegra194-amx"; - reg = <0x2903000 0x100>; + reg = <0x0 0x2903000 0x0 0x100>; sound-name-prefix = "AMX1"; status = "disabled"; }; @@ -217,7 +307,7 @@ tegra_amx2: amx@2903100 { compatible = "nvidia,tegra234-amx", "nvidia,tegra194-amx"; - reg = <0x2903100 0x100>; + reg = <0x0 0x2903100 0x0 0x100>; sound-name-prefix = "AMX2"; status = "disabled"; }; @@ -225,7 +315,7 @@ tegra_amx3: amx@2903200 { compatible = "nvidia,tegra234-amx", "nvidia,tegra194-amx"; - reg = <0x2903200 0x100>; + reg = <0x0 0x2903200 0x0 0x100>; sound-name-prefix = "AMX3"; status = "disabled"; }; @@ -233,7 +323,7 @@ tegra_amx4: amx@2903300 { compatible = "nvidia,tegra234-amx", "nvidia,tegra194-amx"; - reg = <0x2903300 0x100>; + reg = <0x0 0x2903300 0x0 0x100>; sound-name-prefix = "AMX4"; status = "disabled"; }; @@ -241,7 +331,7 @@ tegra_adx1: adx@2903800 { compatible = "nvidia,tegra234-adx", "nvidia,tegra210-adx"; - reg = <0x2903800 0x100>; + reg = <0x0 0x2903800 0x0 0x100>; sound-name-prefix = "ADX1"; status = "disabled"; }; @@ -249,7 +339,7 @@ tegra_adx2: adx@2903900 { compatible = "nvidia,tegra234-adx", "nvidia,tegra210-adx"; - reg = <0x2903900 0x100>; + reg = <0x0 0x2903900 0x0 0x100>; sound-name-prefix = "ADX2"; status = "disabled"; }; @@ -257,7 +347,7 @@ tegra_adx3: adx@2903a00 { compatible = "nvidia,tegra234-adx", "nvidia,tegra210-adx"; - reg = <0x2903a00 0x100>; + reg = <0x0 0x2903a00 0x0 0x100>; sound-name-prefix = "ADX3"; status = "disabled"; }; @@ -265,7 +355,7 @@ tegra_adx4: adx@2903b00 { compatible = "nvidia,tegra234-adx", "nvidia,tegra210-adx"; - reg = <0x2903b00 0x100>; + reg = <0x0 0x2903b00 0x0 0x100>; sound-name-prefix = "ADX4"; status = "disabled"; }; @@ -274,7 +364,7 @@ tegra_dmic1: dmic@2904000 { compatible = "nvidia,tegra234-dmic", "nvidia,tegra210-dmic"; - reg = <0x2904000 0x100>; + reg = <0x0 0x2904000 0x0 0x100>; clocks = <&bpmp TEGRA234_CLK_DMIC1>; clock-names = "dmic"; assigned-clocks = <&bpmp TEGRA234_CLK_DMIC1>; @@ -287,7 +377,7 @@ tegra_dmic2: dmic@2904100 { compatible = "nvidia,tegra234-dmic", "nvidia,tegra210-dmic"; - reg = <0x2904100 0x100>; + reg = <0x0 0x2904100 0x0 0x100>; clocks = <&bpmp TEGRA234_CLK_DMIC2>; clock-names = "dmic"; assigned-clocks = <&bpmp TEGRA234_CLK_DMIC2>; @@ -300,7 +390,7 @@ tegra_dmic3: dmic@2904200 { compatible = "nvidia,tegra234-dmic", "nvidia,tegra210-dmic"; - reg = <0x2904200 0x100>; + reg = <0x0 0x2904200 0x0 0x100>; clocks = <&bpmp TEGRA234_CLK_DMIC3>; clock-names = "dmic"; assigned-clocks = <&bpmp TEGRA234_CLK_DMIC3>; @@ -313,7 +403,7 @@ tegra_dmic4: dmic@2904300 { compatible = "nvidia,tegra234-dmic", "nvidia,tegra210-dmic"; - reg = <0x2904300 0x100>; + reg = <0x0 0x2904300 0x0 0x100>; clocks = <&bpmp TEGRA234_CLK_DMIC4>; clock-names = "dmic"; assigned-clocks = <&bpmp TEGRA234_CLK_DMIC4>; @@ -326,7 +416,7 @@ tegra_dspk1: dspk@2905000 { compatible = "nvidia,tegra234-dspk", "nvidia,tegra186-dspk"; - reg = <0x2905000 0x100>; + reg = <0x0 0x2905000 0x0 0x100>; clocks = <&bpmp TEGRA234_CLK_DSPK1>; clock-names = "dspk"; assigned-clocks = <&bpmp TEGRA234_CLK_DSPK1>; @@ -339,7 +429,7 @@ tegra_dspk2: dspk@2905100 { compatible = "nvidia,tegra234-dspk", "nvidia,tegra186-dspk"; - reg = <0x2905100 0x100>; + reg = <0x0 0x2905100 0x0 0x100>; clocks = <&bpmp TEGRA234_CLK_DSPK2>; clock-names = "dspk"; assigned-clocks = <&bpmp TEGRA234_CLK_DSPK2>; @@ -352,30 +442,31 @@ tegra_ope1: processing-engine@2908000 { compatible = "nvidia,tegra234-ope", "nvidia,tegra210-ope"; - reg = <0x2908000 0x100>; - #address-cells = <1>; - #size-cells = <1>; - ranges; + reg = <0x0 0x2908000 0x0 0x100>; sound-name-prefix = "OPE1"; status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + equalizer@2908100 { compatible = "nvidia,tegra234-peq", "nvidia,tegra210-peq"; - reg = <0x2908100 0x100>; + reg = <0x0 0x2908100 0x0 0x100>; }; dynamic-range-compressor@2908200 { compatible = "nvidia,tegra234-mbdrc", "nvidia,tegra210-mbdrc"; - reg = <0x2908200 0x200>; + reg = <0x0 0x2908200 0x0 0x200>; }; }; tegra_mvc1: mvc@290a000 { compatible = "nvidia,tegra234-mvc", "nvidia,tegra210-mvc"; - reg = <0x290a000 0x200>; + reg = <0x0 0x290a000 0x0 0x200>; sound-name-prefix = "MVC1"; status = "disabled"; }; @@ -383,7 +474,7 @@ tegra_mvc2: mvc@290a200 { compatible = "nvidia,tegra234-mvc", "nvidia,tegra210-mvc"; - reg = <0x290a200 0x200>; + reg = <0x0 0x290a200 0x0 0x200>; sound-name-prefix = "MVC2"; status = "disabled"; }; @@ -391,7 +482,7 @@ tegra_amixer: amixer@290bb00 { compatible = "nvidia,tegra234-amixer", "nvidia,tegra210-amixer"; - reg = <0x290bb00 0x800>; + reg = <0x0 0x290bb00 0x0 0x800>; sound-name-prefix = "MIXER1"; status = "disabled"; }; @@ -399,7 +490,7 @@ tegra_admaif: admaif@290f000 { compatible = "nvidia,tegra234-admaif", "nvidia,tegra186-admaif"; - reg = <0x0290f000 0x1000>; + reg = <0x0 0x0290f000 0x0 0x1000>; dmas = <&adma 1>, <&adma 1>, <&adma 2>, <&adma 2>, <&adma 3>, <&adma 3>, @@ -450,7 +541,7 @@ tegra_asrc: asrc@2910000 { compatible = "nvidia,tegra234-asrc", "nvidia,tegra186-asrc"; - reg = <0x2910000 0x2000>; + reg = <0x0 0x2910000 0x0 0x2000>; sound-name-prefix = "ASRC1"; status = "disabled"; }; @@ -459,7 +550,7 @@ adma: dma-controller@2930000 { compatible = "nvidia,tegra234-adma", "nvidia,tegra186-adma"; - reg = <0x02930000 0x20000>; + reg = <0x0 0x02930000 0x0 0x20000>; interrupt-parent = <&agic>; interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, @@ -504,8 +595,8 @@ "nvidia,tegra210-agic"; #interrupt-cells = <3>; interrupt-controller; - reg = <0x02a41000 0x1000>, - <0x02a42000 0x2000>; + reg = <0x0 0x02a41000 0x0 0x1000>, + <0x0 0x02a42000 0x0 0x2000>; interrupts = <GIC_SPI 145 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; @@ -515,214 +606,26 @@ }; }; - misc@100000 { - compatible = "nvidia,tegra234-misc"; - reg = <0x00100000 0xf000>, - <0x0010f000 0x1000>; - status = "okay"; - }; - - timer@2080000 { - compatible = "nvidia,tegra234-timer"; - reg = <0x02080000 0x00121000>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; - status = "okay"; - }; - - host1x@13e00000 { - compatible = "nvidia,tegra234-host1x"; - reg = <0x13e00000 0x10000>, - <0x13e10000 0x10000>, - <0x13e40000 0x10000>; - reg-names = "common", "hypervisor", "vm"; - interrupts = <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 454 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "syncpt0", "syncpt1", "syncpt2", "syncpt3", "syncpt4", - "syncpt5", "syncpt6", "syncpt7", "host1x"; - clocks = <&bpmp TEGRA234_CLK_HOST1X>; - clock-names = "host1x"; - - #address-cells = <1>; - #size-cells = <1>; - - ranges = <0x14800000 0x14800000 0x02000000>; - interconnects = <&mc TEGRA234_MEMORY_CLIENT_HOST1XDMAR &emc>; - interconnect-names = "dma-mem"; - iommus = <&smmu_niso1 TEGRA234_SID_HOST1X>; - - /* Context isolation domains */ - iommu-map = <0 &smmu_niso0 TEGRA234_SID_HOST1X_CTX0 1>, - <1 &smmu_niso0 TEGRA234_SID_HOST1X_CTX1 1>, - <2 &smmu_niso0 TEGRA234_SID_HOST1X_CTX2 1>, - <3 &smmu_niso0 TEGRA234_SID_HOST1X_CTX3 1>, - <4 &smmu_niso0 TEGRA234_SID_HOST1X_CTX4 1>, - <5 &smmu_niso0 TEGRA234_SID_HOST1X_CTX5 1>, - <6 &smmu_niso0 TEGRA234_SID_HOST1X_CTX6 1>, - <7 &smmu_niso0 TEGRA234_SID_HOST1X_CTX7 1>, - <8 &smmu_niso1 TEGRA234_SID_HOST1X_CTX0 1>, - <9 &smmu_niso1 TEGRA234_SID_HOST1X_CTX1 1>, - <10 &smmu_niso1 TEGRA234_SID_HOST1X_CTX2 1>, - <11 &smmu_niso1 TEGRA234_SID_HOST1X_CTX3 1>, - <12 &smmu_niso1 TEGRA234_SID_HOST1X_CTX4 1>, - <13 &smmu_niso1 TEGRA234_SID_HOST1X_CTX5 1>, - <14 &smmu_niso1 TEGRA234_SID_HOST1X_CTX6 1>, - <15 &smmu_niso1 TEGRA234_SID_HOST1X_CTX7 1>; - - vic@15340000 { - compatible = "nvidia,tegra234-vic"; - reg = <0x15340000 0x00040000>; - interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&bpmp TEGRA234_CLK_VIC>; - clock-names = "vic"; - resets = <&bpmp TEGRA234_RESET_VIC>; - reset-names = "vic"; - - power-domains = <&bpmp TEGRA234_POWER_DOMAIN_VIC>; - interconnects = <&mc TEGRA234_MEMORY_CLIENT_VICSRD &emc>, - <&mc TEGRA234_MEMORY_CLIENT_VICSWR &emc>; - interconnect-names = "dma-mem", "write"; - iommus = <&smmu_niso1 TEGRA234_SID_VIC>; - dma-coherent; - }; - - nvdec@15480000 { - compatible = "nvidia,tegra234-nvdec"; - reg = <0x15480000 0x00040000>; - clocks = <&bpmp TEGRA234_CLK_NVDEC>, - <&bpmp TEGRA234_CLK_FUSE>, - <&bpmp TEGRA234_CLK_TSEC_PKA>; - clock-names = "nvdec", "fuse", "tsec_pka"; - resets = <&bpmp TEGRA234_RESET_NVDEC>; - reset-names = "nvdec"; - power-domains = <&bpmp TEGRA234_POWER_DOMAIN_NVDEC>; - interconnects = <&mc TEGRA234_MEMORY_CLIENT_NVDECSRD &emc>, - <&mc TEGRA234_MEMORY_CLIENT_NVDECSWR &emc>; - interconnect-names = "dma-mem", "write"; - iommus = <&smmu_niso1 TEGRA234_SID_NVDEC>; - dma-coherent; - - nvidia,memory-controller = <&mc>; - - /* - * Placeholder values that firmware needs to update with the real - * offsets parsed from the microcode headers. - */ - nvidia,bl-manifest-offset = <0>; - nvidia,bl-data-offset = <0>; - nvidia,bl-code-offset = <0>; - nvidia,os-manifest-offset = <0>; - nvidia,os-data-offset = <0>; - nvidia,os-code-offset = <0>; - - /* - * Firmware needs to set this to "okay" once the above values have - * been updated. - */ - status = "disabled"; - }; - }; - - gpio: gpio@2200000 { - compatible = "nvidia,tegra234-gpio"; - reg-names = "security", "gpio"; - reg = <0x02200000 0x10000>, - <0x02210000 0x10000>; - interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 291 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>; - #interrupt-cells = <2>; - interrupt-controller; - #gpio-cells = <2>; - gpio-controller; - }; - mc: memory-controller@2c00000 { compatible = "nvidia,tegra234-mc"; - reg = <0x02c00000 0x10000>, /* MC-SID */ - <0x02c10000 0x10000>, /* MC Broadcast*/ - <0x02c20000 0x10000>, /* MC0 */ - <0x02c30000 0x10000>, /* MC1 */ - <0x02c40000 0x10000>, /* MC2 */ - <0x02c50000 0x10000>, /* MC3 */ - <0x02b80000 0x10000>, /* MC4 */ - <0x02b90000 0x10000>, /* MC5 */ - <0x02ba0000 0x10000>, /* MC6 */ - <0x02bb0000 0x10000>, /* MC7 */ - <0x01700000 0x10000>, /* MC8 */ - <0x01710000 0x10000>, /* MC9 */ - <0x01720000 0x10000>, /* MC10 */ - <0x01730000 0x10000>, /* MC11 */ - <0x01740000 0x10000>, /* MC12 */ - <0x01750000 0x10000>, /* MC13 */ - <0x01760000 0x10000>, /* MC14 */ - <0x01770000 0x10000>; /* MC15 */ + reg = <0x0 0x02c00000 0x0 0x10000>, /* MC-SID */ + <0x0 0x02c10000 0x0 0x10000>, /* MC Broadcast*/ + <0x0 0x02c20000 0x0 0x10000>, /* MC0 */ + <0x0 0x02c30000 0x0 0x10000>, /* MC1 */ + <0x0 0x02c40000 0x0 0x10000>, /* MC2 */ + <0x0 0x02c50000 0x0 0x10000>, /* MC3 */ + <0x0 0x02b80000 0x0 0x10000>, /* MC4 */ + <0x0 0x02b90000 0x0 0x10000>, /* MC5 */ + <0x0 0x02ba0000 0x0 0x10000>, /* MC6 */ + <0x0 0x02bb0000 0x0 0x10000>, /* MC7 */ + <0x0 0x01700000 0x0 0x10000>, /* MC8 */ + <0x0 0x01710000 0x0 0x10000>, /* MC9 */ + <0x0 0x01720000 0x0 0x10000>, /* MC10 */ + <0x0 0x01730000 0x0 0x10000>, /* MC11 */ + <0x0 0x01740000 0x0 0x10000>, /* MC12 */ + <0x0 0x01750000 0x0 0x10000>, /* MC13 */ + <0x0 0x01760000 0x0 0x10000>, /* MC14 */ + <0x0 0x01770000 0x0 0x10000>; /* MC15 */ reg-names = "sid", "broadcast", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", "ch8", "ch9", "ch10", "ch11", "ch12", "ch13", "ch14", "ch15"; @@ -732,10 +635,9 @@ #address-cells = <2>; #size-cells = <2>; - - ranges = <0x01700000 0x0 0x01700000 0x0 0x100000>, - <0x02b80000 0x0 0x02b80000 0x0 0x040000>, - <0x02c00000 0x0 0x02c00000 0x0 0x100000>; + ranges = <0x0 0x01700000 0x0 0x01700000 0x0 0x100000>, + <0x0 0x02b80000 0x0 0x02b80000 0x0 0x040000>, + <0x0 0x02c00000 0x0 0x02c00000 0x0 0x100000>; /* * Bit 39 of addresses passing through the memory @@ -752,7 +654,7 @@ * * Limit the DMA range for memory clients to [38:0]. */ - dma-ranges = <0x0 0x0 0x0 0x80 0x0>; + dma-ranges = <0x0 0x0 0x0 0x0 0x80 0x0>; emc: external-memory-controller@2c60000 { compatible = "nvidia,tegra234-emc"; @@ -771,7 +673,7 @@ uarta: serial@3100000 { compatible = "nvidia,tegra234-uart", "nvidia,tegra20-uart"; - reg = <0x03100000 0x10000>; + reg = <0x0 0x03100000 0x0 0x10000>; interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA234_CLK_UARTA>; clock-names = "serial"; @@ -782,9 +684,11 @@ gen1_i2c: i2c@3160000 { compatible = "nvidia,tegra194-i2c"; - reg = <0x3160000 0x100>; + reg = <0x0 0x3160000 0x0 0x100>; status = "disabled"; interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; clock-frequency = <400000>; clocks = <&bpmp TEGRA234_CLK_I2C1 &bpmp TEGRA234_CLK_PLLP_OUT0>; @@ -793,16 +697,16 @@ clock-names = "div-clk", "parent"; resets = <&bpmp TEGRA234_RESET_I2C1>; reset-names = "i2c"; - iommus = <&smmu_niso0 TEGRA234_SID_GPCDMA>; - dma-coherent; dmas = <&gpcdma 21>, <&gpcdma 21>; dma-names = "rx", "tx"; }; cam_i2c: i2c@3180000 { compatible = "nvidia,tegra194-i2c"; - reg = <0x3180000 0x100>; + reg = <0x0 0x3180000 0x0 0x100>; interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; clock-frequency = <400000>; clocks = <&bpmp TEGRA234_CLK_I2C3 @@ -812,16 +716,16 @@ clock-names = "div-clk", "parent"; resets = <&bpmp TEGRA234_RESET_I2C3>; reset-names = "i2c"; - iommus = <&smmu_niso0 TEGRA234_SID_GPCDMA>; - dma-coherent; dmas = <&gpcdma 23>, <&gpcdma 23>; dma-names = "rx", "tx"; }; dp_aux_ch1_i2c: i2c@3190000 { compatible = "nvidia,tegra194-i2c"; - reg = <0x3190000 0x100>; + reg = <0x0 0x3190000 0x0 0x100>; interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; clock-frequency = <100000>; clocks = <&bpmp TEGRA234_CLK_I2C4 @@ -831,16 +735,16 @@ clock-names = "div-clk", "parent"; resets = <&bpmp TEGRA234_RESET_I2C4>; reset-names = "i2c"; - iommus = <&smmu_niso0 TEGRA234_SID_GPCDMA>; - dma-coherent; dmas = <&gpcdma 26>, <&gpcdma 26>; dma-names = "rx", "tx"; }; dp_aux_ch0_i2c: i2c@31b0000 { compatible = "nvidia,tegra194-i2c"; - reg = <0x31b0000 0x100>; + reg = <0x0 0x31b0000 0x0 0x100>; interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; clock-frequency = <100000>; clocks = <&bpmp TEGRA234_CLK_I2C6 @@ -850,16 +754,16 @@ clock-names = "div-clk", "parent"; resets = <&bpmp TEGRA234_RESET_I2C6>; reset-names = "i2c"; - iommus = <&smmu_niso0 TEGRA234_SID_GPCDMA>; - dma-coherent; dmas = <&gpcdma 30>, <&gpcdma 30>; dma-names = "rx", "tx"; }; dp_aux_ch2_i2c: i2c@31c0000 { compatible = "nvidia,tegra194-i2c"; - reg = <0x31c0000 0x100>; + reg = <0x0 0x31c0000 0x0 0x100>; interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; clock-frequency = <100000>; clocks = <&bpmp TEGRA234_CLK_I2C7 @@ -869,23 +773,23 @@ clock-names = "div-clk", "parent"; resets = <&bpmp TEGRA234_RESET_I2C7>; reset-names = "i2c"; - iommus = <&smmu_niso0 TEGRA234_SID_GPCDMA>; - dma-coherent; dmas = <&gpcdma 27>, <&gpcdma 27>; dma-names = "rx", "tx"; }; uarti: serial@31d0000 { compatible = "arm,sbsa-uart"; - reg = <0x31d0000 0x10000>; + reg = <0x0 0x31d0000 0x0 0x10000>; interrupts = <GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; dp_aux_ch3_i2c: i2c@31e0000 { compatible = "nvidia,tegra194-i2c"; - reg = <0x31e0000 0x100>; + reg = <0x0 0x31e0000 0x0 0x100>; interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; clock-frequency = <100000>; clocks = <&bpmp TEGRA234_CLK_I2C9 @@ -895,15 +799,13 @@ clock-names = "div-clk", "parent"; resets = <&bpmp TEGRA234_RESET_I2C9>; reset-names = "i2c"; - iommus = <&smmu_niso0 TEGRA234_SID_GPCDMA>; - dma-coherent; dmas = <&gpcdma 31>, <&gpcdma 31>; dma-names = "rx", "tx"; }; spi@3270000 { compatible = "nvidia,tegra234-qspi"; - reg = <0x3270000 0x1000>; + reg = <0x0 0x3270000 0x0 0x1000>; interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -916,7 +818,7 @@ pwm1: pwm@3280000 { compatible = "nvidia,tegra234-pwm", "nvidia,tegra194-pwm"; - reg = <0x3280000 0x10000>; + reg = <0x0 0x3280000 0x0 0x10000>; clocks = <&bpmp TEGRA234_CLK_PWM1>; resets = <&bpmp TEGRA234_RESET_PWM1>; reset-names = "pwm"; @@ -926,7 +828,7 @@ pwm2: pwm@3290000 { compatible = "nvidia,tegra234-pwm", "nvidia,tegra194-pwm"; - reg = <0x3290000 0x10000>; + reg = <0x0 0x3290000 0x0 0x10000>; clocks = <&bpmp TEGRA234_CLK_PWM2>; resets = <&bpmp TEGRA234_RESET_PWM2>; reset-names = "pwm"; @@ -936,7 +838,7 @@ pwm3: pwm@32a0000 { compatible = "nvidia,tegra234-pwm", "nvidia,tegra194-pwm"; - reg = <0x32a0000 0x10000>; + reg = <0x0 0x32a0000 0x0 0x10000>; clocks = <&bpmp TEGRA234_CLK_PWM3>; resets = <&bpmp TEGRA234_RESET_PWM3>; reset-names = "pwm"; @@ -946,7 +848,7 @@ pwm5: pwm@32c0000 { compatible = "nvidia,tegra234-pwm", "nvidia,tegra194-pwm"; - reg = <0x32c0000 0x10000>; + reg = <0x0 0x32c0000 0x0 0x10000>; clocks = <&bpmp TEGRA234_CLK_PWM5>; resets = <&bpmp TEGRA234_RESET_PWM5>; reset-names = "pwm"; @@ -956,7 +858,7 @@ pwm6: pwm@32d0000 { compatible = "nvidia,tegra234-pwm", "nvidia,tegra194-pwm"; - reg = <0x32d0000 0x10000>; + reg = <0x0 0x32d0000 0x0 0x10000>; clocks = <&bpmp TEGRA234_CLK_PWM6>; resets = <&bpmp TEGRA234_RESET_PWM6>; reset-names = "pwm"; @@ -966,7 +868,7 @@ pwm7: pwm@32e0000 { compatible = "nvidia,tegra234-pwm", "nvidia,tegra194-pwm"; - reg = <0x32e0000 0x10000>; + reg = <0x0 0x32e0000 0x0 0x10000>; clocks = <&bpmp TEGRA234_CLK_PWM7>; resets = <&bpmp TEGRA234_RESET_PWM7>; reset-names = "pwm"; @@ -976,7 +878,7 @@ pwm8: pwm@32f0000 { compatible = "nvidia,tegra234-pwm", "nvidia,tegra194-pwm"; - reg = <0x32f0000 0x10000>; + reg = <0x0 0x32f0000 0x0 0x10000>; clocks = <&bpmp TEGRA234_CLK_PWM8>; resets = <&bpmp TEGRA234_RESET_PWM8>; reset-names = "pwm"; @@ -986,7 +888,7 @@ spi@3300000 { compatible = "nvidia,tegra234-qspi"; - reg = <0x3300000 0x1000>; + reg = <0x0 0x3300000 0x0 0x1000>; interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -999,7 +901,7 @@ mmc@3400000 { compatible = "nvidia,tegra234-sdhci", "nvidia,tegra186-sdhci"; - reg = <0x03400000 0x20000>; + reg = <0x0 0x03400000 0x0 0x20000>; interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA234_CLK_SDMMC1>, <&bpmp TEGRA234_CLK_SDMMC_LEGACY_TM>; @@ -1034,7 +936,7 @@ mmc@3460000 { compatible = "nvidia,tegra234-sdhci", "nvidia,tegra186-sdhci"; - reg = <0x03460000 0x20000>; + reg = <0x0 0x03460000 0x0 0x20000>; interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA234_CLK_SDMMC4>, <&bpmp TEGRA234_CLK_SDMMC_LEGACY_TM>; @@ -1063,7 +965,7 @@ hda@3510000 { compatible = "nvidia,tegra234-hda"; - reg = <0x3510000 0x10000>; + reg = <0x0 0x3510000 0x0 0x10000>; interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA234_CLK_AZA_BIT>, <&bpmp TEGRA234_CLK_AZA_2XBIT>; @@ -1079,16 +981,184 @@ status = "disabled"; }; + xusb_padctl: padctl@3520000 { + compatible = "nvidia,tegra234-xusb-padctl"; + reg = <0x0 0x03520000 0x0 0x20000>, + <0x0 0x03540000 0x0 0x10000>; + reg-names = "padctl", "ao"; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; + + resets = <&bpmp TEGRA234_RESET_XUSB_PADCTL>; + reset-names = "padctl"; + + status = "disabled"; + + pads { + usb2 { + clocks = <&bpmp TEGRA234_CLK_USB2_TRK>; + clock-names = "trk"; + + lanes { + usb2-0 { + nvidia,function = "xusb"; + status = "disabled"; + #phy-cells = <0>; + }; + + usb2-1 { + nvidia,function = "xusb"; + status = "disabled"; + #phy-cells = <0>; + }; + + usb2-2 { + nvidia,function = "xusb"; + status = "disabled"; + #phy-cells = <0>; + }; + + usb2-3 { + nvidia,function = "xusb"; + status = "disabled"; + #phy-cells = <0>; + }; + }; + }; + + usb3 { + lanes { + usb3-0 { + nvidia,function = "xusb"; + status = "disabled"; + #phy-cells = <0>; + }; + + usb3-1 { + nvidia,function = "xusb"; + status = "disabled"; + #phy-cells = <0>; + }; + + usb3-2 { + nvidia,function = "xusb"; + status = "disabled"; + #phy-cells = <0>; + }; + + usb3-3 { + nvidia,function = "xusb"; + status = "disabled"; + #phy-cells = <0>; + }; + }; + }; + }; + + ports { + usb2-0 { + status = "disabled"; + }; + + usb2-1 { + status = "disabled"; + }; + + usb2-2 { + status = "disabled"; + }; + + usb2-3 { + status = "disabled"; + }; + + usb3-0 { + status = "disabled"; + }; + + usb3-1 { + status = "disabled"; + }; + + usb3-2 { + status = "disabled"; + }; + + usb3-3 { + status = "disabled"; + }; + }; + }; + + usb@3550000 { + compatible = "nvidia,tegra234-xudc"; + reg = <0x0 0x03550000 0x0 0x8000>, + <0x0 0x03558000 0x0 0x8000>; + reg-names = "base", "fpci"; + interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA234_CLK_XUSB_CORE_DEV>, + <&bpmp TEGRA234_CLK_XUSB_CORE_SS>, + <&bpmp TEGRA234_CLK_XUSB_SS>, + <&bpmp TEGRA234_CLK_XUSB_FS>; + clock-names = "dev", "ss", "ss_src", "fs_src"; + interconnects = <&mc TEGRA234_MEMORY_CLIENT_XUSB_DEVR &emc>, + <&mc TEGRA234_MEMORY_CLIENT_XUSB_DEVW &emc>; + interconnect-names = "dma-mem", "write"; + iommus = <&smmu_niso1 TEGRA234_SID_XUSB_DEV>; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_XUSBB>, + <&bpmp TEGRA234_POWER_DOMAIN_XUSBA>; + power-domain-names = "dev", "ss"; + nvidia,xusb-padctl = <&xusb_padctl>; + dma-coherent; + status = "disabled"; + }; + + usb@3610000 { + compatible = "nvidia,tegra234-xusb"; + reg = <0x0 0x03610000 0x0 0x40000>, + <0x0 0x03600000 0x0 0x10000>, + <0x0 0x03650000 0x0 0x10000>; + reg-names = "hcd", "fpci", "bar2"; + + interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&bpmp TEGRA234_CLK_XUSB_CORE_HOST>, + <&bpmp TEGRA234_CLK_XUSB_FALCON>, + <&bpmp TEGRA234_CLK_XUSB_CORE_SS>, + <&bpmp TEGRA234_CLK_XUSB_SS>, + <&bpmp TEGRA234_CLK_CLK_M>, + <&bpmp TEGRA234_CLK_XUSB_FS>, + <&bpmp TEGRA234_CLK_UTMIP_PLL>, + <&bpmp TEGRA234_CLK_CLK_M>, + <&bpmp TEGRA234_CLK_PLLE>; + clock-names = "xusb_host", "xusb_falcon_src", + "xusb_ss", "xusb_ss_src", "xusb_hs_src", + "xusb_fs_src", "pll_u_480m", "clk_m", + "pll_e"; + interconnects = <&mc TEGRA234_MEMORY_CLIENT_XUSB_HOSTR &emc>, + <&mc TEGRA234_MEMORY_CLIENT_XUSB_HOSTW &emc>; + interconnect-names = "dma-mem", "write"; + iommus = <&smmu_niso1 TEGRA234_SID_XUSB_HOST>; + + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_XUSBC>, + <&bpmp TEGRA234_POWER_DOMAIN_XUSBA>; + power-domain-names = "xusb_host", "xusb_ss"; + + nvidia,xusb-padctl = <&xusb_padctl>; + dma-coherent; + status = "disabled"; + }; + fuse@3810000 { compatible = "nvidia,tegra234-efuse"; - reg = <0x03810000 0x10000>; + reg = <0x0 0x03810000 0x0 0x10000>; clocks = <&bpmp TEGRA234_CLK_FUSE>; clock-names = "fuse"; }; hsp_top0: hsp@3c00000 { compatible = "nvidia,tegra234-hsp", "nvidia,tegra194-hsp"; - reg = <0x03c00000 0xa0000>; + reg = <0x0 0x03c00000 0x0 0xa0000>; interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, @@ -1106,7 +1176,7 @@ p2u_hsio_0: phy@3e00000 { compatible = "nvidia,tegra234-p2u"; - reg = <0x03e00000 0x10000>; + reg = <0x0 0x03e00000 0x0 0x10000>; reg-names = "ctl"; #phy-cells = <0>; @@ -1114,7 +1184,7 @@ p2u_hsio_1: phy@3e10000 { compatible = "nvidia,tegra234-p2u"; - reg = <0x03e10000 0x10000>; + reg = <0x0 0x03e10000 0x0 0x10000>; reg-names = "ctl"; #phy-cells = <0>; @@ -1122,7 +1192,7 @@ p2u_hsio_2: phy@3e20000 { compatible = "nvidia,tegra234-p2u"; - reg = <0x03e20000 0x10000>; + reg = <0x0 0x03e20000 0x0 0x10000>; reg-names = "ctl"; #phy-cells = <0>; @@ -1130,7 +1200,7 @@ p2u_hsio_3: phy@3e30000 { compatible = "nvidia,tegra234-p2u"; - reg = <0x03e30000 0x10000>; + reg = <0x0 0x03e30000 0x0 0x10000>; reg-names = "ctl"; #phy-cells = <0>; @@ -1138,7 +1208,7 @@ p2u_hsio_4: phy@3e40000 { compatible = "nvidia,tegra234-p2u"; - reg = <0x03e40000 0x10000>; + reg = <0x0 0x03e40000 0x0 0x10000>; reg-names = "ctl"; #phy-cells = <0>; @@ -1146,7 +1216,7 @@ p2u_hsio_5: phy@3e50000 { compatible = "nvidia,tegra234-p2u"; - reg = <0x03e50000 0x10000>; + reg = <0x0 0x03e50000 0x0 0x10000>; reg-names = "ctl"; #phy-cells = <0>; @@ -1154,7 +1224,7 @@ p2u_hsio_6: phy@3e60000 { compatible = "nvidia,tegra234-p2u"; - reg = <0x03e60000 0x10000>; + reg = <0x0 0x03e60000 0x0 0x10000>; reg-names = "ctl"; #phy-cells = <0>; @@ -1162,7 +1232,7 @@ p2u_hsio_7: phy@3e70000 { compatible = "nvidia,tegra234-p2u"; - reg = <0x03e70000 0x10000>; + reg = <0x0 0x03e70000 0x0 0x10000>; reg-names = "ctl"; #phy-cells = <0>; @@ -1170,7 +1240,7 @@ p2u_nvhs_0: phy@3e90000 { compatible = "nvidia,tegra234-p2u"; - reg = <0x03e90000 0x10000>; + reg = <0x0 0x03e90000 0x0 0x10000>; reg-names = "ctl"; #phy-cells = <0>; @@ -1178,7 +1248,7 @@ p2u_nvhs_1: phy@3ea0000 { compatible = "nvidia,tegra234-p2u"; - reg = <0x03ea0000 0x10000>; + reg = <0x0 0x03ea0000 0x0 0x10000>; reg-names = "ctl"; #phy-cells = <0>; @@ -1186,7 +1256,7 @@ p2u_nvhs_2: phy@3eb0000 { compatible = "nvidia,tegra234-p2u"; - reg = <0x03eb0000 0x10000>; + reg = <0x0 0x03eb0000 0x0 0x10000>; reg-names = "ctl"; #phy-cells = <0>; @@ -1194,7 +1264,7 @@ p2u_nvhs_3: phy@3ec0000 { compatible = "nvidia,tegra234-p2u"; - reg = <0x03ec0000 0x10000>; + reg = <0x0 0x03ec0000 0x0 0x10000>; reg-names = "ctl"; #phy-cells = <0>; @@ -1202,7 +1272,7 @@ p2u_nvhs_4: phy@3ed0000 { compatible = "nvidia,tegra234-p2u"; - reg = <0x03ed0000 0x10000>; + reg = <0x0 0x03ed0000 0x0 0x10000>; reg-names = "ctl"; #phy-cells = <0>; @@ -1210,7 +1280,7 @@ p2u_nvhs_5: phy@3ee0000 { compatible = "nvidia,tegra234-p2u"; - reg = <0x03ee0000 0x10000>; + reg = <0x0 0x03ee0000 0x0 0x10000>; reg-names = "ctl"; #phy-cells = <0>; @@ -1218,7 +1288,7 @@ p2u_nvhs_6: phy@3ef0000 { compatible = "nvidia,tegra234-p2u"; - reg = <0x03ef0000 0x10000>; + reg = <0x0 0x03ef0000 0x0 0x10000>; reg-names = "ctl"; #phy-cells = <0>; @@ -1226,7 +1296,7 @@ p2u_nvhs_7: phy@3f00000 { compatible = "nvidia,tegra234-p2u"; - reg = <0x03f00000 0x10000>; + reg = <0x0 0x03f00000 0x0 0x10000>; reg-names = "ctl"; #phy-cells = <0>; @@ -1234,7 +1304,7 @@ p2u_gbe_0: phy@3f20000 { compatible = "nvidia,tegra234-p2u"; - reg = <0x03f20000 0x10000>; + reg = <0x0 0x03f20000 0x0 0x10000>; reg-names = "ctl"; #phy-cells = <0>; @@ -1242,7 +1312,7 @@ p2u_gbe_1: phy@3f30000 { compatible = "nvidia,tegra234-p2u"; - reg = <0x03f30000 0x10000>; + reg = <0x0 0x03f30000 0x0 0x10000>; reg-names = "ctl"; #phy-cells = <0>; @@ -1250,7 +1320,7 @@ p2u_gbe_2: phy@3f40000 { compatible = "nvidia,tegra234-p2u"; - reg = <0x03f40000 0x10000>; + reg = <0x0 0x03f40000 0x0 0x10000>; reg-names = "ctl"; #phy-cells = <0>; @@ -1258,7 +1328,7 @@ p2u_gbe_3: phy@3f50000 { compatible = "nvidia,tegra234-p2u"; - reg = <0x03f50000 0x10000>; + reg = <0x0 0x03f50000 0x0 0x10000>; reg-names = "ctl"; #phy-cells = <0>; @@ -1266,7 +1336,7 @@ p2u_gbe_4: phy@3f60000 { compatible = "nvidia,tegra234-p2u"; - reg = <0x03f60000 0x10000>; + reg = <0x0 0x03f60000 0x0 0x10000>; reg-names = "ctl"; #phy-cells = <0>; @@ -1274,7 +1344,7 @@ p2u_gbe_5: phy@3f70000 { compatible = "nvidia,tegra234-p2u"; - reg = <0x03f70000 0x10000>; + reg = <0x0 0x03f70000 0x0 0x10000>; reg-names = "ctl"; #phy-cells = <0>; @@ -1282,7 +1352,7 @@ p2u_gbe_6: phy@3f80000 { compatible = "nvidia,tegra234-p2u"; - reg = <0x03f80000 0x10000>; + reg = <0x0 0x03f80000 0x0 0x10000>; reg-names = "ctl"; #phy-cells = <0>; @@ -1290,7 +1360,7 @@ p2u_gbe_7: phy@3f90000 { compatible = "nvidia,tegra234-p2u"; - reg = <0x03f90000 0x10000>; + reg = <0x0 0x03f90000 0x0 0x10000>; reg-names = "ctl"; #phy-cells = <0>; @@ -1298,9 +1368,9 @@ ethernet@6800000 { compatible = "nvidia,tegra234-mgbe"; - reg = <0x06800000 0x10000>, - <0x06810000 0x10000>, - <0x068a0000 0x10000>; + reg = <0x0 0x06800000 0x0 0x10000>, + <0x0 0x06810000 0x0 0x10000>, + <0x0 0x068a0000 0x0 0x10000>; reg-names = "hypervisor", "mac", "xpcs"; interrupts = <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "common"; @@ -1332,9 +1402,9 @@ ethernet@6900000 { compatible = "nvidia,tegra234-mgbe"; - reg = <0x06900000 0x10000>, - <0x06910000 0x10000>, - <0x069a0000 0x10000>; + reg = <0x0 0x06900000 0x0 0x10000>, + <0x0 0x06910000 0x0 0x10000>, + <0x0 0x069a0000 0x0 0x10000>; reg-names = "hypervisor", "mac", "xpcs"; interrupts = <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "common"; @@ -1366,9 +1436,9 @@ ethernet@6a00000 { compatible = "nvidia,tegra234-mgbe"; - reg = <0x06a00000 0x10000>, - <0x06a10000 0x10000>, - <0x06aa0000 0x10000>; + reg = <0x0 0x06a00000 0x0 0x10000>, + <0x0 0x06a10000 0x0 0x10000>, + <0x0 0x06aa0000 0x0 0x10000>; reg-names = "hypervisor", "mac", "xpcs"; interrupts = <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "common"; @@ -1400,9 +1470,9 @@ ethernet@6b00000 { compatible = "nvidia,tegra234-mgbe"; - reg = <0x06b00000 0x10000>, - <0x06b10000 0x10000>, - <0x06ba0000 0x10000>; + reg = <0x0 0x06b00000 0x0 0x10000>, + <0x0 0x06b10000 0x0 0x10000>, + <0x0 0x06ba0000 0x0 0x10000>; reg-names = "hypervisor", "mac", "xpcs"; interrupts = <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "common"; @@ -1434,8 +1504,8 @@ smmu_niso1: iommu@8000000 { compatible = "nvidia,tegra234-smmu", "nvidia,smmu-500"; - reg = <0x8000000 0x1000000>, - <0x7000000 0x1000000>; + reg = <0x0 0x8000000 0x0 0x1000000>, + <0x0 0x7000000 0x0 0x1000000>; interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, @@ -1576,21 +1646,21 @@ sce-fabric@b600000 { compatible = "nvidia,tegra234-sce-fabric"; - reg = <0xb600000 0x40000>; + reg = <0x0 0xb600000 0x0 0x40000>; interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; status = "okay"; }; rce-fabric@be00000 { compatible = "nvidia,tegra234-rce-fabric"; - reg = <0xbe00000 0x40000>; + reg = <0x0 0xbe00000 0x0 0x40000>; interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; status = "okay"; }; hsp_aon: hsp@c150000 { compatible = "nvidia,tegra234-hsp", "nvidia,tegra194-hsp"; - reg = <0x0c150000 0x90000>; + reg = <0x0 0x0c150000 0x0 0x90000>; interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, @@ -1605,8 +1675,10 @@ gen2_i2c: i2c@c240000 { compatible = "nvidia,tegra194-i2c"; - reg = <0xc240000 0x100>; + reg = <0x0 0xc240000 0x0 0x100>; interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; clock-frequency = <100000>; clocks = <&bpmp TEGRA234_CLK_I2C2 @@ -1616,16 +1688,16 @@ assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>; resets = <&bpmp TEGRA234_RESET_I2C2>; reset-names = "i2c"; - iommus = <&smmu_niso0 TEGRA234_SID_GPCDMA>; - dma-coherent; dmas = <&gpcdma 22>, <&gpcdma 22>; dma-names = "rx", "tx"; }; gen8_i2c: i2c@c250000 { compatible = "nvidia,tegra194-i2c"; - reg = <0xc250000 0x100>; + reg = <0x0 0xc250000 0x0 0x100>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; clock-frequency = <400000>; clocks = <&bpmp TEGRA234_CLK_I2C8 @@ -1635,15 +1707,13 @@ assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>; resets = <&bpmp TEGRA234_RESET_I2C8>; reset-names = "i2c"; - iommus = <&smmu_niso0 TEGRA234_SID_GPCDMA>; - dma-coherent; dmas = <&gpcdma 0>, <&gpcdma 0>; dma-names = "rx", "tx"; }; rtc@c2a0000 { compatible = "nvidia,tegra234-rtc", "nvidia,tegra20-rtc"; - reg = <0x0c2a0000 0x10000>; + reg = <0x0 0x0c2a0000 0x0 0x10000>; interrupt-parent = <&pmc>; interrupts = <73 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA234_CLK_CLK_32K>; @@ -1654,8 +1724,8 @@ gpio_aon: gpio@c2f0000 { compatible = "nvidia,tegra234-gpio-aon"; reg-names = "security", "gpio"; - reg = <0x0c2f0000 0x1000>, - <0x0c2f1000 0x1000>; + reg = <0x0 0x0c2f0000 0x0 0x1000>, + <0x0 0x0c2f1000 0x0 0x1000>; interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, @@ -1668,7 +1738,7 @@ pwm4: pwm@c340000 { compatible = "nvidia,tegra234-pwm", "nvidia,tegra194-pwm"; - reg = <0xc340000 0x10000>; + reg = <0x0 0xc340000 0x0 0x10000>; clocks = <&bpmp TEGRA234_CLK_PWM4>; resets = <&bpmp TEGRA234_RESET_PWM4>; reset-names = "pwm"; @@ -1678,28 +1748,23 @@ pmc: pmc@c360000 { compatible = "nvidia,tegra234-pmc"; - reg = <0x0c360000 0x10000>, - <0x0c370000 0x10000>, - <0x0c380000 0x10000>, - <0x0c390000 0x10000>, - <0x0c3a0000 0x10000>; + reg = <0x0 0x0c360000 0x0 0x10000>, + <0x0 0x0c370000 0x0 0x10000>, + <0x0 0x0c380000 0x0 0x10000>, + <0x0 0x0c390000 0x0 0x10000>, + <0x0 0x0c3a0000 0x0 0x10000>; reg-names = "pmc", "wake", "aotag", "scratch", "misc"; #interrupt-cells = <2>; interrupt-controller; - sdmmc1_3v3: sdmmc1-3v3 { - pins = "sdmmc1-hv"; - power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>; - }; - sdmmc1_1v8: sdmmc1-1v8 { pins = "sdmmc1-hv"; power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>; }; - sdmmc3_3v3: sdmmc3-3v3 { - pins = "sdmmc3-hv"; + sdmmc1_3v3: sdmmc1-3v3 { + pins = "sdmmc1-hv"; power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>; }; @@ -1707,33 +1772,45 @@ pins = "sdmmc3-hv"; power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>; }; + + sdmmc3_3v3: sdmmc3-3v3 { + pins = "sdmmc3-hv"; + power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>; + }; }; aon-fabric@c600000 { compatible = "nvidia,tegra234-aon-fabric"; - reg = <0xc600000 0x40000>; + reg = <0x0 0xc600000 0x0 0x40000>; interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>; status = "okay"; }; bpmp-fabric@d600000 { compatible = "nvidia,tegra234-bpmp-fabric"; - reg = <0xd600000 0x40000>; + reg = <0x0 0xd600000 0x0 0x40000>; interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; status = "okay"; }; dce-fabric@de00000 { compatible = "nvidia,tegra234-sce-fabric"; - reg = <0xde00000 0x40000>; + reg = <0x0 0xde00000 0x0 0x40000>; interrupts = <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>; status = "okay"; }; + ccplex@e000000 { + compatible = "nvidia,tegra234-ccplex-cluster"; + reg = <0x0 0x0e000000 0x0 0x5ffff>; + nvidia,bpmp = <&bpmp>; + status = "okay"; + }; + gic: interrupt-controller@f400000 { compatible = "arm,gic-v3"; - reg = <0x0f400000 0x010000>, /* GICD */ - <0x0f440000 0x200000>; /* GICR */ + reg = <0x0 0x0f400000 0x0 0x010000>, /* GICD */ + <0x0 0x0f440000 0x0 0x200000>; /* GICR */ interrupt-parent = <&gic>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; @@ -1744,7 +1821,7 @@ smmu_iso: iommu@10000000 { compatible = "nvidia,tegra234-smmu", "nvidia,smmu-500"; - reg = <0x10000000 0x1000000>; + reg = <0x0 0x10000000 0x0 0x1000000>; interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, @@ -1884,8 +1961,8 @@ smmu_niso0: iommu@12000000 { compatible = "nvidia,tegra234-smmu", "nvidia,smmu-500"; - reg = <0x12000000 0x1000000>, - <0x11000000 0x1000000>; + reg = <0x0 0x12000000 0x0 0x1000000>, + <0x0 0x11000000 0x0 0x1000000>; interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, @@ -2026,771 +2103,867 @@ cbb-fabric@13a00000 { compatible = "nvidia,tegra234-cbb-fabric"; - reg = <0x13a00000 0x400000>; + reg = <0x0 0x13a00000 0x0 0x400000>; interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>; status = "okay"; }; - }; - ccplex@e000000 { - compatible = "nvidia,tegra234-ccplex-cluster"; - reg = <0x0 0x0e000000 0x0 0x5ffff>; - nvidia,bpmp = <&bpmp>; - status = "okay"; - }; + host1x@13e00000 { + compatible = "nvidia,tegra234-host1x"; + reg = <0x0 0x13e00000 0x0 0x10000>, + <0x0 0x13e10000 0x0 0x10000>, + <0x0 0x13e40000 0x0 0x10000>; + reg-names = "common", "hypervisor", "vm"; + interrupts = <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 454 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "syncpt0", "syncpt1", "syncpt2", "syncpt3", "syncpt4", + "syncpt5", "syncpt6", "syncpt7", "host1x"; + clocks = <&bpmp TEGRA234_CLK_HOST1X>; + clock-names = "host1x"; - pcie@140a0000 { - compatible = "nvidia,tegra234-pcie"; - power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX4CA>; - reg = <0x00 0x140a0000 0x0 0x00020000>, /* appl registers (128K) */ - <0x00 0x2a000000 0x0 0x00040000>, /* configuration space (256K) */ - <0x00 0x2a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ - <0x00 0x2a080000 0x0 0x00040000>, /* DBI reg space (256K) */ - <0x35 0x30000000 0x0 0x10000000>; /* ECAM (256MB) */ - reg-names = "appl", "config", "atu_dma", "dbi", "ecam"; - - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - num-lanes = <4>; - num-viewport = <8>; - linux,pci-domain = <8>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x14800000 0x0 0x14800000 0x0 0x02000000>; + + interconnects = <&mc TEGRA234_MEMORY_CLIENT_HOST1XDMAR &emc>; + interconnect-names = "dma-mem"; + iommus = <&smmu_niso1 TEGRA234_SID_HOST1X>; + dma-coherent; + + /* Context isolation domains */ + iommu-map = <0 &smmu_niso0 TEGRA234_SID_HOST1X_CTX0 1>, + <1 &smmu_niso0 TEGRA234_SID_HOST1X_CTX1 1>, + <2 &smmu_niso0 TEGRA234_SID_HOST1X_CTX2 1>, + <3 &smmu_niso0 TEGRA234_SID_HOST1X_CTX3 1>, + <4 &smmu_niso0 TEGRA234_SID_HOST1X_CTX4 1>, + <5 &smmu_niso0 TEGRA234_SID_HOST1X_CTX5 1>, + <6 &smmu_niso0 TEGRA234_SID_HOST1X_CTX6 1>, + <7 &smmu_niso0 TEGRA234_SID_HOST1X_CTX7 1>, + <8 &smmu_niso1 TEGRA234_SID_HOST1X_CTX0 1>, + <9 &smmu_niso1 TEGRA234_SID_HOST1X_CTX1 1>, + <10 &smmu_niso1 TEGRA234_SID_HOST1X_CTX2 1>, + <11 &smmu_niso1 TEGRA234_SID_HOST1X_CTX3 1>, + <12 &smmu_niso1 TEGRA234_SID_HOST1X_CTX4 1>, + <13 &smmu_niso1 TEGRA234_SID_HOST1X_CTX5 1>, + <14 &smmu_niso1 TEGRA234_SID_HOST1X_CTX6 1>, + <15 &smmu_niso1 TEGRA234_SID_HOST1X_CTX7 1>; + + vic@15340000 { + compatible = "nvidia,tegra234-vic"; + reg = <0x0 0x15340000 0x0 0x00040000>; + interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA234_CLK_VIC>; + clock-names = "vic"; + resets = <&bpmp TEGRA234_RESET_VIC>; + reset-names = "vic"; + + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_VIC>; + interconnects = <&mc TEGRA234_MEMORY_CLIENT_VICSRD &emc>, + <&mc TEGRA234_MEMORY_CLIENT_VICSWR &emc>; + interconnect-names = "dma-mem", "write"; + iommus = <&smmu_niso1 TEGRA234_SID_VIC>; + dma-coherent; + }; + + nvdec@15480000 { + compatible = "nvidia,tegra234-nvdec"; + reg = <0x0 0x15480000 0x0 0x00040000>; + clocks = <&bpmp TEGRA234_CLK_NVDEC>, + <&bpmp TEGRA234_CLK_FUSE>, + <&bpmp TEGRA234_CLK_TSEC_PKA>; + clock-names = "nvdec", "fuse", "tsec_pka"; + resets = <&bpmp TEGRA234_RESET_NVDEC>; + reset-names = "nvdec"; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_NVDEC>; + interconnects = <&mc TEGRA234_MEMORY_CLIENT_NVDECSRD &emc>, + <&mc TEGRA234_MEMORY_CLIENT_NVDECSWR &emc>; + interconnect-names = "dma-mem", "write"; + iommus = <&smmu_niso1 TEGRA234_SID_NVDEC>; + dma-coherent; - clocks = <&bpmp TEGRA234_CLK_PEX2_C8_CORE>; - clock-names = "core"; + nvidia,memory-controller = <&mc>; - resets = <&bpmp TEGRA234_RESET_PEX2_CORE_8_APB>, - <&bpmp TEGRA234_RESET_PEX2_CORE_8>; - reset-names = "apb", "core"; + /* + * Placeholder values that firmware needs to update with the real + * offsets parsed from the microcode headers. + */ + nvidia,bl-manifest-offset = <0>; + nvidia,bl-data-offset = <0>; + nvidia,bl-code-offset = <0>; + nvidia,os-manifest-offset = <0>; + nvidia,os-data-offset = <0>; + nvidia,os-code-offset = <0>; - interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ - <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ - interrupt-names = "intr", "msi"; + /* + * Firmware needs to set this to "okay" once the above values have + * been updated. + */ + status = "disabled"; + }; + }; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + pcie@140a0000 { + compatible = "nvidia,tegra234-pcie"; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX4CA>; + reg = <0x00 0x140a0000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x2a000000 0x0 0x00040000>, /* configuration space (256K) */ + <0x00 0x2a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x2a080000 0x0 0x00040000>, /* DBI reg space (256K) */ + <0x35 0x30000000 0x0 0x10000000>; /* ECAM (256MB) */ + reg-names = "appl", "config", "atu_dma", "dbi", "ecam"; - nvidia,bpmp = <&bpmp 8>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <4>; + num-viewport = <8>; + linux,pci-domain = <8>; - nvidia,aspm-cmrt-us = <60>; - nvidia,aspm-pwr-on-t-us = <20>; - nvidia,aspm-l0s-entrance-latency-us = <3>; + clocks = <&bpmp TEGRA234_CLK_PEX2_C8_CORE>; + clock-names = "core"; - bus-range = <0x0 0xff>; + resets = <&bpmp TEGRA234_RESET_PEX2_CORE_8_APB>, + <&bpmp TEGRA234_RESET_PEX2_CORE_8>; + reset-names = "apb", "core"; - ranges = <0x43000000 0x32 0x40000000 0x32 0x40000000 0x2 0xe8000000>, /* prefetchable memory (11904 MB) */ - <0x02000000 0x0 0x40000000 0x35 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */ - <0x01000000 0x0 0x2a100000 0x00 0x2a100000 0x0 0x00100000>; /* downstream I/O (1 MB) */ + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; - interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE8AR &emc>, - <&mc TEGRA234_MEMORY_CLIENT_PCIE8AW &emc>; - interconnect-names = "dma-mem", "write"; - iommu-map = <0x0 &smmu_niso1 TEGRA234_SID_PCIE8 0x1000>; - iommu-map-mask = <0x0>; - dma-coherent; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - }; + nvidia,bpmp = <&bpmp 8>; - pcie@140c0000 { - compatible = "nvidia,tegra234-pcie"; - power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX4CB>; - reg = <0x00 0x140c0000 0x0 0x00020000>, /* appl registers (128K) */ - <0x00 0x2c000000 0x0 0x00040000>, /* configuration space (256K) */ - <0x00 0x2c040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ - <0x00 0x2c080000 0x0 0x00040000>, /* DBI reg space (256K) */ - <0x38 0x30000000 0x0 0x10000000>; /* ECAM (256MB) */ - reg-names = "appl", "config", "atu_dma", "dbi", "ecam"; - - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - num-lanes = <4>; - num-viewport = <8>; - linux,pci-domain = <9>; + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + bus-range = <0x0 0xff>; - clocks = <&bpmp TEGRA234_CLK_PEX2_C9_CORE>; - clock-names = "core"; + ranges = <0x43000000 0x32 0x40000000 0x32 0x40000000 0x2 0xe8000000>, /* prefetchable memory (11904 MB) */ + <0x02000000 0x0 0x40000000 0x35 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */ + <0x01000000 0x0 0x2a100000 0x00 0x2a100000 0x0 0x00100000>; /* downstream I/O (1 MB) */ + + interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE8AR &emc>, + <&mc TEGRA234_MEMORY_CLIENT_PCIE8AW &emc>; + interconnect-names = "dma-mem", "write"; + iommu-map = <0x0 &smmu_niso1 TEGRA234_SID_PCIE8 0x1000>; + iommu-map-mask = <0x0>; + dma-coherent; - resets = <&bpmp TEGRA234_RESET_PEX2_CORE_9_APB>, - <&bpmp TEGRA234_RESET_PEX2_CORE_9>; - reset-names = "apb", "core"; + status = "disabled"; + }; - interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ - <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ - interrupt-names = "intr", "msi"; + pcie@140c0000 { + compatible = "nvidia,tegra234-pcie"; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX4CB>; + reg = <0x00 0x140c0000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x2c000000 0x0 0x00040000>, /* configuration space (256K) */ + <0x00 0x2c040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x2c080000 0x0 0x00040000>, /* DBI reg space (256K) */ + <0x38 0x30000000 0x0 0x10000000>; /* ECAM (256MB) */ + reg-names = "appl", "config", "atu_dma", "dbi", "ecam"; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <4>; + num-viewport = <8>; + linux,pci-domain = <9>; - nvidia,bpmp = <&bpmp 9>; + clocks = <&bpmp TEGRA234_CLK_PEX2_C9_CORE>; + clock-names = "core"; - nvidia,aspm-cmrt-us = <60>; - nvidia,aspm-pwr-on-t-us = <20>; - nvidia,aspm-l0s-entrance-latency-us = <3>; + resets = <&bpmp TEGRA234_RESET_PEX2_CORE_9_APB>, + <&bpmp TEGRA234_RESET_PEX2_CORE_9>; + reset-names = "apb", "core"; - bus-range = <0x0 0xff>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; - ranges = <0x43000000 0x35 0x40000000 0x35 0x40000000 0x2 0xc0000000>, /* prefetchable memory (11264 MB) */ - <0x02000000 0x0 0x40000000 0x38 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */ - <0x01000000 0x0 0x2c100000 0x00 0x2c100000 0x0 0x00100000>; /* downstream I/O (1 MB) */ + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; - interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE9AR &emc>, - <&mc TEGRA234_MEMORY_CLIENT_PCIE9AW &emc>; - interconnect-names = "dma-mem", "write"; - iommu-map = <0x0 &smmu_niso0 TEGRA234_SID_PCIE9 0x1000>; - iommu-map-mask = <0x0>; - dma-coherent; + nvidia,bpmp = <&bpmp 9>; - status = "disabled"; - }; + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; - pcie@140e0000 { - compatible = "nvidia,tegra234-pcie"; - power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX4CC>; - reg = <0x00 0x140e0000 0x0 0x00020000>, /* appl registers (128K) */ - <0x00 0x2e000000 0x0 0x00040000>, /* configuration space (256K) */ - <0x00 0x2e040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ - <0x00 0x2e080000 0x0 0x00040000>, /* DBI reg space (256K) */ - <0x3b 0x30000000 0x0 0x10000000>; /* ECAM (256MB) */ - reg-names = "appl", "config", "atu_dma", "dbi", "ecam"; - - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - num-lanes = <4>; - num-viewport = <8>; - linux,pci-domain = <10>; + bus-range = <0x0 0xff>; - clocks = <&bpmp TEGRA234_CLK_PEX2_C10_CORE>; - clock-names = "core"; + ranges = <0x43000000 0x35 0x40000000 0x35 0x40000000 0x2 0xc0000000>, /* prefetchable memory (11264 MB) */ + <0x02000000 0x0 0x40000000 0x38 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */ + <0x01000000 0x0 0x2c100000 0x00 0x2c100000 0x0 0x00100000>; /* downstream I/O (1 MB) */ - resets = <&bpmp TEGRA234_RESET_PEX2_CORE_10_APB>, - <&bpmp TEGRA234_RESET_PEX2_CORE_10>; - reset-names = "apb", "core"; + interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE9AR &emc>, + <&mc TEGRA234_MEMORY_CLIENT_PCIE9AW &emc>; + interconnect-names = "dma-mem", "write"; + iommu-map = <0x0 &smmu_niso0 TEGRA234_SID_PCIE9 0x1000>; + iommu-map-mask = <0x0>; + dma-coherent; - interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ - <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ - interrupt-names = "intr", "msi"; + status = "disabled"; + }; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; + pcie@140e0000 { + compatible = "nvidia,tegra234-pcie"; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX4CC>; + reg = <0x00 0x140e0000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x2e000000 0x0 0x00040000>, /* configuration space (256K) */ + <0x00 0x2e040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x2e080000 0x0 0x00040000>, /* DBI reg space (256K) */ + <0x3b 0x30000000 0x0 0x10000000>; /* ECAM (256MB) */ + reg-names = "appl", "config", "atu_dma", "dbi", "ecam"; - nvidia,bpmp = <&bpmp 10>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <4>; + num-viewport = <8>; + linux,pci-domain = <10>; - nvidia,aspm-cmrt-us = <60>; - nvidia,aspm-pwr-on-t-us = <20>; - nvidia,aspm-l0s-entrance-latency-us = <3>; + clocks = <&bpmp TEGRA234_CLK_PEX2_C10_CORE>; + clock-names = "core"; - bus-range = <0x0 0xff>; + resets = <&bpmp TEGRA234_RESET_PEX2_CORE_10_APB>, + <&bpmp TEGRA234_RESET_PEX2_CORE_10>; + reset-names = "apb", "core"; - ranges = <0x43000000 0x38 0x40000000 0x38 0x40000000 0x2 0xe8000000>, /* prefetchable memory (11904 MB) */ - <0x02000000 0x0 0x40000000 0x3b 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */ - <0x01000000 0x0 0x2e100000 0x00 0x2e100000 0x0 0x00100000>; /* downstream I/O (1 MB) */ + interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; - interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE10AR &emc>, - <&mc TEGRA234_MEMORY_CLIENT_PCIE10AW &emc>; - interconnect-names = "dma-mem", "write"; - iommu-map = <0x0 &smmu_niso1 TEGRA234_SID_PCIE10 0x1000>; - iommu-map-mask = <0x0>; - dma-coherent; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - }; + nvidia,bpmp = <&bpmp 10>; - pcie@14100000 { - compatible = "nvidia,tegra234-pcie"; - power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX1A>; - reg = <0x00 0x14100000 0x0 0x00020000>, /* appl registers (128K) */ - <0x00 0x30000000 0x0 0x00040000>, /* configuration space (256K) */ - <0x00 0x30040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ - <0x00 0x30080000 0x0 0x00040000>, /* DBI reg space (256K) */ - <0x20 0xb0000000 0x0 0x10000000>; /* ECAM (256MB) */ - reg-names = "appl", "config", "atu_dma", "dbi", "ecam"; - - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - num-lanes = <1>; - num-viewport = <8>; - linux,pci-domain = <1>; + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; - clocks = <&bpmp TEGRA234_CLK_PEX0_C1_CORE>; - clock-names = "core"; + bus-range = <0x0 0xff>; - resets = <&bpmp TEGRA234_RESET_PEX0_CORE_1_APB>, - <&bpmp TEGRA234_RESET_PEX0_CORE_1>; - reset-names = "apb", "core"; + ranges = <0x43000000 0x38 0x40000000 0x38 0x40000000 0x2 0xe8000000>, /* prefetchable memory (11904 MB) */ + <0x02000000 0x0 0x40000000 0x3b 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */ + <0x01000000 0x0 0x2e100000 0x00 0x2e100000 0x0 0x00100000>; /* downstream I/O (1 MB) */ - interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ - <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ - interrupt-names = "intr", "msi"; + interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE10AR &emc>, + <&mc TEGRA234_MEMORY_CLIENT_PCIE10AW &emc>; + interconnect-names = "dma-mem", "write"; + iommu-map = <0x0 &smmu_niso1 TEGRA234_SID_PCIE10 0x1000>; + iommu-map-mask = <0x0>; + dma-coherent; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; - nvidia,bpmp = <&bpmp 1>; + pcie-ep@140e0000 { + compatible = "nvidia,tegra234-pcie-ep"; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX4CC>; + reg = <0x00 0x140e0000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x2e040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x2e080000 0x0 0x00040000>, /* DBI space (256K) */ + <0x38 0x40000000 0x3 0x00000000>; /* Address Space (12G) */ + reg-names = "appl", "atu_dma", "dbi", "addr_space"; - nvidia,aspm-cmrt-us = <60>; - nvidia,aspm-pwr-on-t-us = <20>; - nvidia,aspm-l0s-entrance-latency-us = <3>; + num-lanes = <4>; - bus-range = <0x0 0xff>; + clocks = <&bpmp TEGRA234_CLK_PEX2_C10_CORE>; + clock-names = "core"; - ranges = <0x43000000 0x20 0x80000000 0x20 0x80000000 0x0 0x28000000>, /* prefetchable memory (640 MB) */ - <0x02000000 0x0 0x40000000 0x20 0xa8000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */ - <0x01000000 0x0 0x30100000 0x00 0x30100000 0x0 0x00100000>; /* downstream I/O (1 MB) */ + resets = <&bpmp TEGRA234_RESET_PEX2_CORE_10_APB>, + <&bpmp TEGRA234_RESET_PEX2_CORE_10>; + reset-names = "apb", "core"; - interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE1R &emc>, - <&mc TEGRA234_MEMORY_CLIENT_PCIE1W &emc>; - interconnect-names = "dma-mem", "write"; - iommu-map = <0x0 &smmu_niso1 TEGRA234_SID_PCIE1 0x1000>; - iommu-map-mask = <0x0>; - dma-coherent; + interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ + interrupt-names = "intr"; - status = "disabled"; - }; + nvidia,bpmp = <&bpmp 10>; - pcie@14120000 { - compatible = "nvidia,tegra234-pcie"; - power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX1A>; - reg = <0x00 0x14120000 0x0 0x00020000>, /* appl registers (128K) */ - <0x00 0x32000000 0x0 0x00040000>, /* configuration space (256K) */ - <0x00 0x32040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ - <0x00 0x32080000 0x0 0x00040000>, /* DBI reg space (256K) */ - <0x20 0xf0000000 0x0 0x10000000>; /* ECAM (256MB) */ - reg-names = "appl", "config", "atu_dma", "dbi", "ecam"; - - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - num-lanes = <1>; - num-viewport = <8>; - linux,pci-domain = <2>; + nvidia,enable-ext-refclk; + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; - clocks = <&bpmp TEGRA234_CLK_PEX0_C2_CORE>; - clock-names = "core"; + interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE10AR &emc>, + <&mc TEGRA234_MEMORY_CLIENT_PCIE10AW &emc>; + interconnect-names = "dma-mem", "write"; + iommu-map = <0x0 &smmu_niso1 TEGRA234_SID_PCIE10 0x1000>; + iommu-map-mask = <0x0>; + dma-coherent; - resets = <&bpmp TEGRA234_RESET_PEX0_CORE_2_APB>, - <&bpmp TEGRA234_RESET_PEX0_CORE_2>; - reset-names = "apb", "core"; + status = "disabled"; + }; - interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ - <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ - interrupt-names = "intr", "msi"; + pcie@14100000 { + compatible = "nvidia,tegra234-pcie"; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX1A>; + reg = <0x00 0x14100000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x30000000 0x0 0x00040000>, /* configuration space (256K) */ + <0x00 0x30040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x30080000 0x0 0x00040000>, /* DBI reg space (256K) */ + <0x20 0xb0000000 0x0 0x10000000>; /* ECAM (256MB) */ + reg-names = "appl", "config", "atu_dma", "dbi", "ecam"; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <1>; + num-viewport = <8>; + linux,pci-domain = <1>; - nvidia,bpmp = <&bpmp 2>; + clocks = <&bpmp TEGRA234_CLK_PEX0_C1_CORE>; + clock-names = "core"; - nvidia,aspm-cmrt-us = <60>; - nvidia,aspm-pwr-on-t-us = <20>; - nvidia,aspm-l0s-entrance-latency-us = <3>; + resets = <&bpmp TEGRA234_RESET_PEX0_CORE_1_APB>, + <&bpmp TEGRA234_RESET_PEX0_CORE_1>; + reset-names = "apb", "core"; - bus-range = <0x0 0xff>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; - ranges = <0x43000000 0x20 0xc0000000 0x20 0xc0000000 0x0 0x28000000>, /* prefetchable memory (640 MB) */ - <0x02000000 0x0 0x40000000 0x20 0xe8000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */ - <0x01000000 0x0 0x32100000 0x00 0x32100000 0x0 0x00100000>; /* downstream I/O (1 MB) */ + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; - interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE2AR &emc>, - <&mc TEGRA234_MEMORY_CLIENT_PCIE2AW &emc>; - interconnect-names = "dma-mem", "write"; - iommu-map = <0x0 &smmu_niso1 TEGRA234_SID_PCIE2 0x1000>; - iommu-map-mask = <0x0>; - dma-coherent; + nvidia,bpmp = <&bpmp 1>; - status = "disabled"; - }; + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; - pcie@14140000 { - compatible = "nvidia,tegra234-pcie"; - power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX1A>; - reg = <0x00 0x14140000 0x0 0x00020000>, /* appl registers (128K) */ - <0x00 0x34000000 0x0 0x00040000>, /* configuration space (256K) */ - <0x00 0x34040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ - <0x00 0x34080000 0x0 0x00040000>, /* DBI reg space (256K) */ - <0x21 0x30000000 0x0 0x10000000>; /* ECAM (256MB) */ - reg-names = "appl", "config", "atu_dma", "dbi", "ecam"; - - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - num-lanes = <1>; - num-viewport = <8>; - linux,pci-domain = <3>; + bus-range = <0x0 0xff>; - clocks = <&bpmp TEGRA234_CLK_PEX0_C3_CORE>; - clock-names = "core"; + ranges = <0x43000000 0x20 0x80000000 0x20 0x80000000 0x0 0x28000000>, /* prefetchable memory (640 MB) */ + <0x02000000 0x0 0x40000000 0x20 0xa8000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */ + <0x01000000 0x0 0x30100000 0x00 0x30100000 0x0 0x00100000>; /* downstream I/O (1 MB) */ - resets = <&bpmp TEGRA234_RESET_PEX0_CORE_3_APB>, - <&bpmp TEGRA234_RESET_PEX0_CORE_3>; - reset-names = "apb", "core"; + interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE1R &emc>, + <&mc TEGRA234_MEMORY_CLIENT_PCIE1W &emc>; + interconnect-names = "dma-mem", "write"; + iommu-map = <0x0 &smmu_niso1 TEGRA234_SID_PCIE1 0x1000>; + iommu-map-mask = <0x0>; + dma-coherent; - interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ - <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ - interrupt-names = "intr", "msi"; + status = "disabled"; + }; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + pcie@14120000 { + compatible = "nvidia,tegra234-pcie"; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX1A>; + reg = <0x00 0x14120000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x32000000 0x0 0x00040000>, /* configuration space (256K) */ + <0x00 0x32040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x32080000 0x0 0x00040000>, /* DBI reg space (256K) */ + <0x20 0xf0000000 0x0 0x10000000>; /* ECAM (256MB) */ + reg-names = "appl", "config", "atu_dma", "dbi", "ecam"; - nvidia,bpmp = <&bpmp 3>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <1>; + num-viewport = <8>; + linux,pci-domain = <2>; - nvidia,aspm-cmrt-us = <60>; - nvidia,aspm-pwr-on-t-us = <20>; - nvidia,aspm-l0s-entrance-latency-us = <3>; + clocks = <&bpmp TEGRA234_CLK_PEX0_C2_CORE>; + clock-names = "core"; - bus-range = <0x0 0xff>; + resets = <&bpmp TEGRA234_RESET_PEX0_CORE_2_APB>, + <&bpmp TEGRA234_RESET_PEX0_CORE_2>; + reset-names = "apb", "core"; - ranges = <0x43000000 0x21 0x00000000 0x21 0x00000000 0x0 0x28000000>, /* prefetchable memory (640 MB) */ - <0x02000000 0x0 0x40000000 0x21 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */ - <0x01000000 0x0 0x34100000 0x00 0x34100000 0x0 0x00100000>; /* downstream I/O (1 MB) */ + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; - interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE3R &emc>, - <&mc TEGRA234_MEMORY_CLIENT_PCIE3W &emc>; - interconnect-names = "dma-mem", "write"; - iommu-map = <0x0 &smmu_niso1 TEGRA234_SID_PCIE3 0x1000>; - iommu-map-mask = <0x0>; - dma-coherent; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - }; + nvidia,bpmp = <&bpmp 2>; - pcie@14160000 { - compatible = "nvidia,tegra234-pcie"; - power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX4BB>; - reg = <0x00 0x14160000 0x0 0x00020000>, /* appl registers (128K) */ - <0x00 0x36000000 0x0 0x00040000>, /* configuration space (256K) */ - <0x00 0x36040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ - <0x00 0x36080000 0x0 0x00040000>, /* DBI reg space (256K) */ - <0x24 0x30000000 0x0 0x10000000>; /* ECAM (256MB) */ - reg-names = "appl", "config", "atu_dma", "dbi", "ecam"; - - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - num-lanes = <4>; - num-viewport = <8>; - linux,pci-domain = <4>; + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; - clocks = <&bpmp TEGRA234_CLK_PEX0_C4_CORE>; - clock-names = "core"; + bus-range = <0x0 0xff>; - resets = <&bpmp TEGRA234_RESET_PEX0_CORE_4_APB>, - <&bpmp TEGRA234_RESET_PEX0_CORE_4>; - reset-names = "apb", "core"; + ranges = <0x43000000 0x20 0xc0000000 0x20 0xc0000000 0x0 0x28000000>, /* prefetchable memory (640 MB) */ + <0x02000000 0x0 0x40000000 0x20 0xe8000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */ + <0x01000000 0x0 0x32100000 0x00 0x32100000 0x0 0x00100000>; /* downstream I/O (1 MB) */ - interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ - <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ - interrupt-names = "intr", "msi"; + interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE2AR &emc>, + <&mc TEGRA234_MEMORY_CLIENT_PCIE2AW &emc>; + interconnect-names = "dma-mem", "write"; + iommu-map = <0x0 &smmu_niso1 TEGRA234_SID_PCIE2 0x1000>; + iommu-map-mask = <0x0>; + dma-coherent; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; - nvidia,bpmp = <&bpmp 4>; + pcie@14140000 { + compatible = "nvidia,tegra234-pcie"; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX1A>; + reg = <0x00 0x14140000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x34000000 0x0 0x00040000>, /* configuration space (256K) */ + <0x00 0x34040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x34080000 0x0 0x00040000>, /* DBI reg space (256K) */ + <0x21 0x30000000 0x0 0x10000000>; /* ECAM (256MB) */ + reg-names = "appl", "config", "atu_dma", "dbi", "ecam"; - nvidia,aspm-cmrt-us = <60>; - nvidia,aspm-pwr-on-t-us = <20>; - nvidia,aspm-l0s-entrance-latency-us = <3>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <1>; + num-viewport = <8>; + linux,pci-domain = <3>; - bus-range = <0x0 0xff>; + clocks = <&bpmp TEGRA234_CLK_PEX0_C3_CORE>; + clock-names = "core"; - ranges = <0x43000000 0x21 0x40000000 0x21 0x40000000 0x2 0xe8000000>, /* prefetchable memory (11904 MB) */ - <0x02000000 0x0 0x40000000 0x24 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */ - <0x01000000 0x0 0x36100000 0x00 0x36100000 0x0 0x00100000>; /* downstream I/O (1 MB) */ + resets = <&bpmp TEGRA234_RESET_PEX0_CORE_3_APB>, + <&bpmp TEGRA234_RESET_PEX0_CORE_3>; + reset-names = "apb", "core"; - interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE4R &emc>, - <&mc TEGRA234_MEMORY_CLIENT_PCIE4W &emc>; - interconnect-names = "dma-mem", "write"; - iommu-map = <0x0 &smmu_niso0 TEGRA234_SID_PCIE4 0x1000>; - iommu-map-mask = <0x0>; - dma-coherent; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; - status = "disabled"; - }; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; - pcie@14180000 { - compatible = "nvidia,tegra234-pcie"; - power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX4BA>; - reg = <0x00 0x14180000 0x0 0x00020000>, /* appl registers (128K) */ - <0x00 0x38000000 0x0 0x00040000>, /* configuration space (256K) */ - <0x00 0x38040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ - <0x00 0x38080000 0x0 0x00040000>, /* DBI reg space (256K) */ - <0x27 0x30000000 0x0 0x10000000>; /* ECAM (256MB) */ - reg-names = "appl", "config", "atu_dma", "dbi", "ecam"; - - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - num-lanes = <4>; - num-viewport = <8>; - linux,pci-domain = <0>; + nvidia,bpmp = <&bpmp 3>; - clocks = <&bpmp TEGRA234_CLK_PEX0_C0_CORE>; - clock-names = "core"; + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; - resets = <&bpmp TEGRA234_RESET_PEX0_CORE_0_APB>, - <&bpmp TEGRA234_RESET_PEX0_CORE_0>; - reset-names = "apb", "core"; + bus-range = <0x0 0xff>; - interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ - <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ - interrupt-names = "intr", "msi"; + ranges = <0x43000000 0x21 0x00000000 0x21 0x00000000 0x0 0x28000000>, /* prefetchable memory (640 MB) */ + <0x02000000 0x0 0x40000000 0x21 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */ + <0x01000000 0x0 0x34100000 0x00 0x34100000 0x0 0x00100000>; /* downstream I/O (1 MB) */ - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE3R &emc>, + <&mc TEGRA234_MEMORY_CLIENT_PCIE3W &emc>; + interconnect-names = "dma-mem", "write"; + iommu-map = <0x0 &smmu_niso1 TEGRA234_SID_PCIE3 0x1000>; + iommu-map-mask = <0x0>; + dma-coherent; - nvidia,bpmp = <&bpmp 0>; + status = "disabled"; + }; - nvidia,aspm-cmrt-us = <60>; - nvidia,aspm-pwr-on-t-us = <20>; - nvidia,aspm-l0s-entrance-latency-us = <3>; + pcie@14160000 { + compatible = "nvidia,tegra234-pcie"; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX4BB>; + reg = <0x00 0x14160000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x36000000 0x0 0x00040000>, /* configuration space (256K) */ + <0x00 0x36040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x36080000 0x0 0x00040000>, /* DBI reg space (256K) */ + <0x24 0x30000000 0x0 0x10000000>; /* ECAM (256MB) */ + reg-names = "appl", "config", "atu_dma", "dbi", "ecam"; - bus-range = <0x0 0xff>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <4>; + num-viewport = <8>; + linux,pci-domain = <4>; - ranges = <0x43000000 0x24 0x40000000 0x24 0x40000000 0x2 0xe8000000>, /* prefetchable memory (11904 MB) */ - <0x02000000 0x0 0x40000000 0x27 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */ - <0x01000000 0x0 0x38100000 0x00 0x38100000 0x0 0x00100000>; /* downstream I/O (1 MB) */ + clocks = <&bpmp TEGRA234_CLK_PEX0_C4_CORE>; + clock-names = "core"; - interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE0R &emc>, - <&mc TEGRA234_MEMORY_CLIENT_PCIE0W &emc>; - interconnect-names = "dma-mem", "write"; - iommu-map = <0x0 &smmu_niso0 TEGRA234_SID_PCIE0 0x1000>; - iommu-map-mask = <0x0>; - dma-coherent; + resets = <&bpmp TEGRA234_RESET_PEX0_CORE_4_APB>, + <&bpmp TEGRA234_RESET_PEX0_CORE_4>; + reset-names = "apb", "core"; - status = "disabled"; - }; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; - pcie@141a0000 { - compatible = "nvidia,tegra234-pcie"; - power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX8A>; - reg = <0x00 0x141a0000 0x0 0x00020000>, /* appl registers (128K) */ - <0x00 0x3a000000 0x0 0x00040000>, /* configuration space (256K) */ - <0x00 0x3a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ - <0x00 0x3a080000 0x0 0x00040000>, /* DBI reg space (256K) */ - <0x2b 0x30000000 0x0 0x10000000>; /* ECAM (256MB) */ - reg-names = "appl", "config", "atu_dma", "dbi", "ecam"; - - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - num-lanes = <8>; - num-viewport = <8>; - linux,pci-domain = <5>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&bpmp TEGRA234_CLK_PEX1_C5_CORE>; - clock-names = "core"; + nvidia,bpmp = <&bpmp 4>; - resets = <&bpmp TEGRA234_RESET_PEX1_CORE_5_APB>, - <&bpmp TEGRA234_RESET_PEX1_CORE_5>; - reset-names = "apb", "core"; + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; - interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ - <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ - interrupt-names = "intr", "msi"; + bus-range = <0x0 0xff>; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + ranges = <0x43000000 0x21 0x40000000 0x21 0x40000000 0x2 0xe8000000>, /* prefetchable memory (11904 MB) */ + <0x02000000 0x0 0x40000000 0x24 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */ + <0x01000000 0x0 0x36100000 0x00 0x36100000 0x0 0x00100000>; /* downstream I/O (1 MB) */ - nvidia,bpmp = <&bpmp 5>; + interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE4R &emc>, + <&mc TEGRA234_MEMORY_CLIENT_PCIE4W &emc>; + interconnect-names = "dma-mem", "write"; + iommu-map = <0x0 &smmu_niso0 TEGRA234_SID_PCIE4 0x1000>; + iommu-map-mask = <0x0>; + dma-coherent; - nvidia,aspm-cmrt-us = <60>; - nvidia,aspm-pwr-on-t-us = <20>; - nvidia,aspm-l0s-entrance-latency-us = <3>; + status = "disabled"; + }; - bus-range = <0x0 0xff>; + pcie@14180000 { + compatible = "nvidia,tegra234-pcie"; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX4BA>; + reg = <0x00 0x14180000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x38000000 0x0 0x00040000>, /* configuration space (256K) */ + <0x00 0x38040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x38080000 0x0 0x00040000>, /* DBI reg space (256K) */ + <0x27 0x30000000 0x0 0x10000000>; /* ECAM (256MB) */ + reg-names = "appl", "config", "atu_dma", "dbi", "ecam"; - ranges = <0x43000000 0x28 0x00000000 0x28 0x00000000 0x3 0x28000000>, /* prefetchable memory (12928 MB) */ - <0x02000000 0x0 0x40000000 0x2b 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */ - <0x01000000 0x0 0x3a100000 0x00 0x3a100000 0x0 0x00100000>; /* downstream I/O (1 MB) */ + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <4>; + num-viewport = <8>; + linux,pci-domain = <0>; - interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE5R &emc>, - <&mc TEGRA234_MEMORY_CLIENT_PCIE5W &emc>; - interconnect-names = "dma-mem", "write"; - iommu-map = <0x0 &smmu_niso0 TEGRA234_SID_PCIE5 0x1000>; - iommu-map-mask = <0x0>; - dma-coherent; + clocks = <&bpmp TEGRA234_CLK_PEX0_C0_CORE>; + clock-names = "core"; - status = "disabled"; - }; + resets = <&bpmp TEGRA234_RESET_PEX0_CORE_0_APB>, + <&bpmp TEGRA234_RESET_PEX0_CORE_0>; + reset-names = "apb", "core"; - pcie@141c0000 { - compatible = "nvidia,tegra234-pcie"; - power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX4A>; - reg = <0x00 0x141c0000 0x0 0x00020000>, /* appl registers (128K) */ - <0x00 0x3c000000 0x0 0x00040000>, /* configuration space (256K) */ - <0x00 0x3c040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ - <0x00 0x3c080000 0x0 0x00040000>, /* DBI reg space (256K) */ - <0x2e 0x30000000 0x0 0x10000000>; /* ECAM (256MB) */ - reg-names = "appl", "config", "atu_dma", "dbi", "ecam"; - - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - num-lanes = <4>; - num-viewport = <8>; - linux,pci-domain = <6>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; - clocks = <&bpmp TEGRA234_CLK_PEX1_C6_CORE>; - clock-names = "core"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; - resets = <&bpmp TEGRA234_RESET_PEX1_CORE_6_APB>, - <&bpmp TEGRA234_RESET_PEX1_CORE_6>; - reset-names = "apb", "core"; + nvidia,bpmp = <&bpmp 0>; - interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ - <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ - interrupt-names = "intr", "msi"; + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; + bus-range = <0x0 0xff>; - nvidia,bpmp = <&bpmp 6>; + ranges = <0x43000000 0x24 0x40000000 0x24 0x40000000 0x2 0xe8000000>, /* prefetchable memory (11904 MB) */ + <0x02000000 0x0 0x40000000 0x27 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */ + <0x01000000 0x0 0x38100000 0x00 0x38100000 0x0 0x00100000>; /* downstream I/O (1 MB) */ - nvidia,aspm-cmrt-us = <60>; - nvidia,aspm-pwr-on-t-us = <20>; - nvidia,aspm-l0s-entrance-latency-us = <3>; + interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE0R &emc>, + <&mc TEGRA234_MEMORY_CLIENT_PCIE0W &emc>; + interconnect-names = "dma-mem", "write"; + iommu-map = <0x0 &smmu_niso0 TEGRA234_SID_PCIE0 0x1000>; + iommu-map-mask = <0x0>; + dma-coherent; - bus-range = <0x0 0xff>; + status = "disabled"; + }; - ranges = <0x43000000 0x2b 0x40000000 0x2b 0x40000000 0x2 0xe8000000>, /* prefetchable memory (11904 MB) */ - <0x02000000 0x0 0x40000000 0x2e 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */ - <0x01000000 0x0 0x3c100000 0x00 0x3c100000 0x0 0x00100000>; /* downstream I/O (1 MB) */ + pcie@141a0000 { + compatible = "nvidia,tegra234-pcie"; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX8A>; + reg = <0x00 0x141a0000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x3a000000 0x0 0x00040000>, /* configuration space (256K) */ + <0x00 0x3a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x3a080000 0x0 0x00040000>, /* DBI reg space (256K) */ + <0x2b 0x30000000 0x0 0x10000000>; /* ECAM (256MB) */ + reg-names = "appl", "config", "atu_dma", "dbi", "ecam"; - interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE6AR &emc>, - <&mc TEGRA234_MEMORY_CLIENT_PCIE6AW &emc>; - interconnect-names = "dma-mem", "write"; - iommu-map = <0x0 &smmu_niso0 TEGRA234_SID_PCIE6 0x1000>; - iommu-map-mask = <0x0>; - dma-coherent; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <8>; + num-viewport = <8>; + linux,pci-domain = <5>; - status = "disabled"; - }; + clocks = <&bpmp TEGRA234_CLK_PEX1_C5_CORE>; + clock-names = "core"; - pcie@141e0000 { - compatible = "nvidia,tegra234-pcie"; - power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX8B>; - reg = <0x00 0x141e0000 0x0 0x00020000>, /* appl registers (128K) */ - <0x00 0x3e000000 0x0 0x00040000>, /* configuration space (256K) */ - <0x00 0x3e040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ - <0x00 0x3e080000 0x0 0x00040000>, /* DBI reg space (256K) */ - <0x32 0x30000000 0x0 0x10000000>; /* ECAM (256MB) */ - reg-names = "appl", "config", "atu_dma", "dbi", "ecam"; - - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - num-lanes = <8>; - num-viewport = <8>; - linux,pci-domain = <7>; + resets = <&bpmp TEGRA234_RESET_PEX1_CORE_5_APB>, + <&bpmp TEGRA234_RESET_PEX1_CORE_5>; + reset-names = "apb", "core"; - clocks = <&bpmp TEGRA234_CLK_PEX2_C7_CORE>; - clock-names = "core"; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; - resets = <&bpmp TEGRA234_RESET_PEX2_CORE_7_APB>, - <&bpmp TEGRA234_RESET_PEX2_CORE_7>; - reset-names = "apb", "core"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; - interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ - <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ - interrupt-names = "intr", "msi"; + nvidia,bpmp = <&bpmp 5>; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; - nvidia,bpmp = <&bpmp 7>; + bus-range = <0x0 0xff>; - nvidia,aspm-cmrt-us = <60>; - nvidia,aspm-pwr-on-t-us = <20>; - nvidia,aspm-l0s-entrance-latency-us = <3>; + ranges = <0x43000000 0x28 0x00000000 0x28 0x00000000 0x3 0x28000000>, /* prefetchable memory (12928 MB) */ + <0x02000000 0x0 0x40000000 0x2b 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */ + <0x01000000 0x0 0x3a100000 0x00 0x3a100000 0x0 0x00100000>; /* downstream I/O (1 MB) */ - bus-range = <0x0 0xff>; + interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE5R &emc>, + <&mc TEGRA234_MEMORY_CLIENT_PCIE5W &emc>; + interconnect-names = "dma-mem", "write"; + iommu-map = <0x0 &smmu_niso0 TEGRA234_SID_PCIE5 0x1000>; + iommu-map-mask = <0x0>; + dma-coherent; - ranges = <0x43000000 0x30 0x00000000 0x30 0x00000000 0x2 0x28000000>, /* prefetchable memory (8832 MB) */ - <0x02000000 0x0 0x40000000 0x32 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */ - <0x01000000 0x0 0x3e100000 0x00 0x3e100000 0x0 0x00100000>; /* downstream I/O (1 MB) */ + status = "disabled"; + }; - interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE7AR &emc>, - <&mc TEGRA234_MEMORY_CLIENT_PCIE7AW &emc>; - interconnect-names = "dma-mem", "write"; - iommu-map = <0x0 &smmu_niso1 TEGRA234_SID_PCIE7 0x1000>; - iommu-map-mask = <0x0>; - dma-coherent; + pcie-ep@141a0000 { + compatible = "nvidia,tegra234-pcie-ep"; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX8A>; + reg = <0x00 0x141a0000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x3a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x3a080000 0x0 0x00040000>, /* DBI reg space (256K) */ + <0x27 0x40000000 0x4 0x00000000>; /* Address Space (16G) */ + reg-names = "appl", "atu_dma", "dbi", "addr_space"; - status = "disabled"; - }; + num-lanes = <8>; - pcie-ep@141a0000 { - compatible = "nvidia,tegra234-pcie-ep"; - power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX8A>; - reg = <0x00 0x141a0000 0x0 0x00020000>, /* appl registers (128K) */ - <0x00 0x3a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ - <0x00 0x3a080000 0x0 0x00040000>, /* DBI reg space (256K) */ - <0x27 0x40000000 0x4 0x00000000>; /* Address Space (16G) */ - reg-names = "appl", "atu_dma", "dbi", "addr_space"; + clocks = <&bpmp TEGRA234_CLK_PEX1_C5_CORE>; + clock-names = "core"; - num-lanes = <8>; + resets = <&bpmp TEGRA234_RESET_PEX1_CORE_5_APB>, + <&bpmp TEGRA234_RESET_PEX1_CORE_5>; + reset-names = "apb", "core"; - clocks = <&bpmp TEGRA234_CLK_PEX1_C5_CORE>; - clock-names = "core"; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ + interrupt-names = "intr"; - resets = <&bpmp TEGRA234_RESET_PEX1_CORE_5_APB>, - <&bpmp TEGRA234_RESET_PEX1_CORE_5>; - reset-names = "apb", "core"; + nvidia,bpmp = <&bpmp 5>; - interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ - interrupt-names = "intr"; + nvidia,enable-ext-refclk; + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; - nvidia,bpmp = <&bpmp 5>; + interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE5R &emc>, + <&mc TEGRA234_MEMORY_CLIENT_PCIE5W &emc>; + interconnect-names = "dma-mem", "write"; + iommu-map = <0x0 &smmu_niso0 TEGRA234_SID_PCIE5 0x1000>; + iommu-map-mask = <0x0>; + dma-coherent; - nvidia,enable-ext-refclk; - nvidia,aspm-cmrt-us = <60>; - nvidia,aspm-pwr-on-t-us = <20>; - nvidia,aspm-l0s-entrance-latency-us = <3>; + status = "disabled"; + }; - interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE5R &emc>, - <&mc TEGRA234_MEMORY_CLIENT_PCIE5W &emc>; - interconnect-names = "dma-mem", "write"; - iommu-map = <0x0 &smmu_niso0 TEGRA234_SID_PCIE5 0x1000>; - iommu-map-mask = <0x0>; - dma-coherent; + pcie@141c0000 { + compatible = "nvidia,tegra234-pcie"; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX4A>; + reg = <0x00 0x141c0000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x3c000000 0x0 0x00040000>, /* configuration space (256K) */ + <0x00 0x3c040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x3c080000 0x0 0x00040000>, /* DBI reg space (256K) */ + <0x2e 0x30000000 0x0 0x10000000>; /* ECAM (256MB) */ + reg-names = "appl", "config", "atu_dma", "dbi", "ecam"; - status = "disabled"; - }; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <4>; + num-viewport = <8>; + linux,pci-domain = <6>; - pcie-ep@141c0000{ - compatible = "nvidia,tegra234-pcie-ep"; - power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX4A>; - reg = <0x00 0x141c0000 0x0 0x00020000>, /* appl registers (128K) */ - <0x00 0x3c040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ - <0x00 0x3c080000 0x0 0x00040000>, /* DBI space (256K) */ - <0x2b 0x40000000 0x3 0x00000000>; /* Address Space (12G) */ - reg-names = "appl", "atu_dma", "dbi", "addr_space"; + clocks = <&bpmp TEGRA234_CLK_PEX1_C6_CORE>; + clock-names = "core"; - num-lanes = <4>; + resets = <&bpmp TEGRA234_RESET_PEX1_CORE_6_APB>, + <&bpmp TEGRA234_RESET_PEX1_CORE_6>; + reset-names = "apb", "core"; - clocks = <&bpmp TEGRA234_CLK_PEX1_C6_CORE>; - clock-names = "core"; + interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; - resets = <&bpmp TEGRA234_RESET_PEX1_CORE_6_APB>, - <&bpmp TEGRA234_RESET_PEX1_CORE_6>; - reset-names = "apb", "core"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; - interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ - interrupt-names = "intr"; + nvidia,bpmp = <&bpmp 6>; - nvidia,bpmp = <&bpmp 6>; + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; - nvidia,enable-ext-refclk; - nvidia,aspm-cmrt-us = <60>; - nvidia,aspm-pwr-on-t-us = <20>; - nvidia,aspm-l0s-entrance-latency-us = <3>; + bus-range = <0x0 0xff>; - interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE6AR &emc>, - <&mc TEGRA234_MEMORY_CLIENT_PCIE6AW &emc>; - interconnect-names = "dma-mem", "write"; - iommu-map = <0x0 &smmu_niso0 TEGRA234_SID_PCIE6 0x1000>; - iommu-map-mask = <0x0>; - dma-coherent; + ranges = <0x43000000 0x2b 0x40000000 0x2b 0x40000000 0x2 0xe8000000>, /* prefetchable memory (11904 MB) */ + <0x02000000 0x0 0x40000000 0x2e 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */ + <0x01000000 0x0 0x3c100000 0x00 0x3c100000 0x0 0x00100000>; /* downstream I/O (1 MB) */ - status = "disabled"; - }; + interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE6AR &emc>, + <&mc TEGRA234_MEMORY_CLIENT_PCIE6AW &emc>; + interconnect-names = "dma-mem", "write"; + iommu-map = <0x0 &smmu_niso0 TEGRA234_SID_PCIE6 0x1000>; + iommu-map-mask = <0x0>; + dma-coherent; - pcie-ep@141e0000{ - compatible = "nvidia,tegra234-pcie-ep"; - power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX8B>; - reg = <0x00 0x141e0000 0x0 0x00020000>, /* appl registers (128K) */ - <0x00 0x3e040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ - <0x00 0x3e080000 0x0 0x00040000>, /* DBI space (256K) */ - <0x2e 0x40000000 0x4 0x00000000>; /* Address Space (16G) */ - reg-names = "appl", "atu_dma", "dbi", "addr_space"; + status = "disabled"; + }; - num-lanes = <8>; + pcie-ep@141c0000 { + compatible = "nvidia,tegra234-pcie-ep"; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX4A>; + reg = <0x00 0x141c0000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x3c040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x3c080000 0x0 0x00040000>, /* DBI space (256K) */ + <0x2b 0x40000000 0x3 0x00000000>; /* Address Space (12G) */ + reg-names = "appl", "atu_dma", "dbi", "addr_space"; - clocks = <&bpmp TEGRA234_CLK_PEX2_C7_CORE>; - clock-names = "core"; + num-lanes = <4>; - resets = <&bpmp TEGRA234_RESET_PEX2_CORE_7_APB>, - <&bpmp TEGRA234_RESET_PEX2_CORE_7>; - reset-names = "apb", "core"; + clocks = <&bpmp TEGRA234_CLK_PEX1_C6_CORE>; + clock-names = "core"; - interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ - interrupt-names = "intr"; + resets = <&bpmp TEGRA234_RESET_PEX1_CORE_6_APB>, + <&bpmp TEGRA234_RESET_PEX1_CORE_6>; + reset-names = "apb", "core"; - nvidia,bpmp = <&bpmp 7>; + interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ + interrupt-names = "intr"; - nvidia,enable-ext-refclk; - nvidia,aspm-cmrt-us = <60>; - nvidia,aspm-pwr-on-t-us = <20>; - nvidia,aspm-l0s-entrance-latency-us = <3>; + nvidia,bpmp = <&bpmp 6>; - interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE7AR &emc>, - <&mc TEGRA234_MEMORY_CLIENT_PCIE7AW &emc>; - interconnect-names = "dma-mem", "write"; - iommu-map = <0x0 &smmu_niso1 TEGRA234_SID_PCIE7 0x1000>; - iommu-map-mask = <0x0>; - dma-coherent; + nvidia,enable-ext-refclk; + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; - status = "disabled"; - }; + interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE6AR &emc>, + <&mc TEGRA234_MEMORY_CLIENT_PCIE6AW &emc>; + interconnect-names = "dma-mem", "write"; + iommu-map = <0x0 &smmu_niso0 TEGRA234_SID_PCIE6 0x1000>; + iommu-map-mask = <0x0>; + dma-coherent; - pcie-ep@140e0000{ - compatible = "nvidia,tegra234-pcie-ep"; - power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX4CC>; - reg = <0x00 0x140e0000 0x0 0x00020000>, /* appl registers (128K) */ - <0x00 0x2e040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ - <0x00 0x2e080000 0x0 0x00040000>, /* DBI space (256K) */ - <0x38 0x40000000 0x3 0x00000000>; /* Address Space (12G) */ - reg-names = "appl", "atu_dma", "dbi", "addr_space"; + status = "disabled"; + }; - num-lanes = <4>; + pcie@141e0000 { + compatible = "nvidia,tegra234-pcie"; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX8B>; + reg = <0x00 0x141e0000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x3e000000 0x0 0x00040000>, /* configuration space (256K) */ + <0x00 0x3e040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x3e080000 0x0 0x00040000>, /* DBI reg space (256K) */ + <0x32 0x30000000 0x0 0x10000000>; /* ECAM (256MB) */ + reg-names = "appl", "config", "atu_dma", "dbi", "ecam"; - clocks = <&bpmp TEGRA234_CLK_PEX2_C10_CORE>; - clock-names = "core"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <8>; + num-viewport = <8>; + linux,pci-domain = <7>; - resets = <&bpmp TEGRA234_RESET_PEX2_CORE_10_APB>, - <&bpmp TEGRA234_RESET_PEX2_CORE_10>; - reset-names = "apb", "core"; + clocks = <&bpmp TEGRA234_CLK_PEX2_C7_CORE>; + clock-names = "core"; - interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ - interrupt-names = "intr"; + resets = <&bpmp TEGRA234_RESET_PEX2_CORE_7_APB>, + <&bpmp TEGRA234_RESET_PEX2_CORE_7>; + reset-names = "apb", "core"; - nvidia,bpmp = <&bpmp 10>; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; - nvidia,enable-ext-refclk; - nvidia,aspm-cmrt-us = <60>; - nvidia,aspm-pwr-on-t-us = <20>; - nvidia,aspm-l0s-entrance-latency-us = <3>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; - interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE10AR &emc>, - <&mc TEGRA234_MEMORY_CLIENT_PCIE10AW &emc>; - interconnect-names = "dma-mem", "write"; - iommu-map = <0x0 &smmu_niso1 TEGRA234_SID_PCIE10 0x1000>; - iommu-map-mask = <0x0>; - dma-coherent; + nvidia,bpmp = <&bpmp 7>; - status = "disabled"; + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + bus-range = <0x0 0xff>; + + ranges = <0x43000000 0x30 0x00000000 0x30 0x00000000 0x2 0x28000000>, /* prefetchable memory (8832 MB) */ + <0x02000000 0x0 0x40000000 0x32 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */ + <0x01000000 0x0 0x3e100000 0x00 0x3e100000 0x0 0x00100000>; /* downstream I/O (1 MB) */ + + interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE7AR &emc>, + <&mc TEGRA234_MEMORY_CLIENT_PCIE7AW &emc>; + interconnect-names = "dma-mem", "write"; + iommu-map = <0x0 &smmu_niso1 TEGRA234_SID_PCIE7 0x1000>; + iommu-map-mask = <0x0>; + dma-coherent; + + status = "disabled"; + }; + + pcie-ep@141e0000 { + compatible = "nvidia,tegra234-pcie-ep"; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX8B>; + reg = <0x00 0x141e0000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x3e040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x3e080000 0x0 0x00040000>, /* DBI space (256K) */ + <0x2e 0x40000000 0x4 0x00000000>; /* Address Space (16G) */ + reg-names = "appl", "atu_dma", "dbi", "addr_space"; + + num-lanes = <8>; + + clocks = <&bpmp TEGRA234_CLK_PEX2_C7_CORE>; + clock-names = "core"; + + resets = <&bpmp TEGRA234_RESET_PEX2_CORE_7_APB>, + <&bpmp TEGRA234_RESET_PEX2_CORE_7>; + reset-names = "apb", "core"; + + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ + interrupt-names = "intr"; + + nvidia,bpmp = <&bpmp 7>; + + nvidia,enable-ext-refclk; + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE7AR &emc>, + <&mc TEGRA234_MEMORY_CLIENT_PCIE7AW &emc>; + interconnect-names = "dma-mem", "write"; + iommu-map = <0x0 &smmu_niso1 TEGRA234_SID_PCIE7 0x1000>; + iommu-map-mask = <0x0>; + dma-coherent; + + status = "disabled"; + }; }; sram@40000000 { compatible = "nvidia,tegra234-sysram", "mmio-sram"; reg = <0x0 0x40000000 0x0 0x80000>; + #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x0 0x40000000 0x80000>; + no-memory-wc; cpu_bpmp_tx: sram@70000 { diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 3e79496292e7..31aa54f0428c 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -7,8 +7,10 @@ dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c2.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-acer-a1-724.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z00l.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-gplus-fl8005a.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-huawei-g7.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8150.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8910.dtb @@ -18,9 +20,19 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a5u-eur.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-e5.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-e7.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-grandmax.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-gt510.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-gt58.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-j5.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-j5x.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-serranove.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-thwc-uf896.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-thwc-ufi001c.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt88047.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8953-motorola-potter.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-daisy.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-mido.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-tissot.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-vince.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8956-sony-xperia-loire-kugo.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8956-sony-xperia-loire-suzu.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-lg-bullhead-rev-10.dtb @@ -56,8 +68,10 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-poplar.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-xiaomi-sagit.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb +dtb-$(CONFIG_ARCH_QCOM) += qdu1000-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5.dtb dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5-vision-mezzanine.dtb +dtb-$(CONFIG_ARCH_QCOM) += qru1000-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += sa8155p-adp.dtb dtb-$(CONFIG_ARCH_QCOM) += sa8295p-adp.dtb dtb-$(CONFIG_ARCH_QCOM) += sa8540p-ride.dtb @@ -113,6 +127,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-crd.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-crd-pro.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-evoker.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-evoker-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-herobrine-r1.dtb @@ -121,17 +136,21 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r1-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-zombie.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-zombie-lte.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-zombie-nvme.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-zombie-nvme-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp2.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-crd-r3.dtb dtb-$(CONFIG_ARCH_QCOM) += sc8280xp-crd.dtb dtb-$(CONFIG_ARCH_QCOM) += sc8280xp-lenovo-thinkpad-x13s.dtb dtb-$(CONFIG_ARCH_QCOM) += sda660-inforce-ifc6560.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm450-motorola-ali.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-ganges-kirin.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-discovery.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-pioneer.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-voyager.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm632-fairphone-fp3.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm632-motorola-ocean.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm636-sony-xperia-ganges-mermaid.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm660-xiaomi-lavender.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm670-google-sargo.dtb @@ -156,6 +175,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-shift-axolotl.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm850-samsung-w737.dtb dtb-$(CONFIG_ARCH_QCOM) += sm4250-oneplus-billie2.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm6115p-lenovo-j606f.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6125-sony-xperia-seine-pdx201.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6350-sony-xperia-lena-pdx213.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6375-sony-xperia-murray-pdx225.dtb @@ -169,6 +189,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8250-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8250-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8250-sony-xperia-edo-pdx203.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8250-sony-xperia-edo-pdx206.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8250-xiaomi-elish.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8350-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8350-microsoft-surface-duo2.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8350-mtp.dtb @@ -178,3 +199,4 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8450-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8450-qrd.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8450-sony-xperia-nagara-pdx223.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8450-sony-xperia-nagara-pdx224.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8550-mtp.dtb diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts index ef5b39ba1238..c52d79a55d80 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts @@ -169,10 +169,6 @@ }; }; -&blsp_dma { - status = "okay"; -}; - &blsp_i2c2 { /* On Low speed expansion */ status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi index 5d453f11acd9..bbd94025ff5d 100644 --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi @@ -87,6 +87,12 @@ }; }; + firmware { + scm { + compatible = "qcom,scm-ipq6018", "qcom,scm"; + }; + }; + cpu_opp_table: opp-table-cpu { compatible = "operating-points-v2"; opp-shared; @@ -96,26 +102,31 @@ opp-microvolt = <725000>; clock-latency-ns = <200000>; }; + opp-1056000000 { opp-hz = /bits/ 64 <1056000000>; opp-microvolt = <787500>; clock-latency-ns = <200000>; }; + opp-1320000000 { opp-hz = /bits/ 64 <1320000000>; opp-microvolt = <862500>; clock-latency-ns = <200000>; }; + opp-1440000000 { opp-hz = /bits/ 64 <1440000000>; opp-microvolt = <925000>; clock-latency-ns = <200000>; }; + opp-1608000000 { opp-hz = /bits/ 64 <1608000000>; opp-microvolt = <987500>; clock-latency-ns = <200000>; }; + opp-1800000000 { opp-hz = /bits/ 64 <1800000000>; opp-microvolt = <1062500>; @@ -123,16 +134,9 @@ }; }; - firmware { - scm { - compatible = "qcom,scm-ipq6018", "qcom,scm"; - }; - }; - pmuv8: pmu { compatible = "arm,cortex-a53-pmu"; - interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | - IRQ_TYPE_LEVEL_HIGH)>; + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; psci: psci { @@ -146,7 +150,7 @@ ranges; rpm_msg_ram: memory@60000 { - reg = <0x0 0x60000 0x0 0x6000>; + reg = <0x0 0x00060000 0x0 0x6000>; no-map; }; @@ -166,6 +170,28 @@ }; }; + rpm-glink { + compatible = "qcom,glink-rpm"; + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + mboxes = <&apcs_glb 0>; + + rpm_requests: rpm-requests { + compatible = "qcom,rpm-ipq6018"; + qcom,glink-channels = "rpm_requests"; + + regulators { + compatible = "qcom,rpm-mp5496-regulators"; + + ipq6018_s2: s2 { + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1062500>; + regulator-always-on; + }; + }; + }; + }; + smem { compatible = "qcom,smem"; memory-region = <&smem_region>; @@ -179,9 +205,105 @@ dma-ranges; compatible = "simple-bus"; + qusb_phy_1: qusb@59000 { + compatible = "qcom,ipq6018-qusb2-phy"; + reg = <0x0 0x00059000 0x0 0x180>; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB1_PHY_CFG_AHB_CLK>, + <&xo>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2_1_PHY_BCR>; + status = "disabled"; + }; + + ssphy_0: ssphy@78000 { + compatible = "qcom,ipq6018-qmp-usb3-phy"; + reg = <0x0 0x00078000 0x0 0x1c4>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_USB0_AUX_CLK>, + <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, <&xo>; + clock-names = "aux", "cfg_ahb", "ref"; + + resets = <&gcc GCC_USB0_PHY_BCR>, + <&gcc GCC_USB3PHY_0_PHY_BCR>; + reset-names = "phy","common"; + status = "disabled"; + + usb0_ssphy: phy@78200 { + reg = <0x0 0x00078200 0x0 0x130>, /* Tx */ + <0x0 0x00078400 0x0 0x200>, /* Rx */ + <0x0 0x00078800 0x0 0x1f8>, /* PCS */ + <0x0 0x00078600 0x0 0x044>; /* PCS misc */ + #phy-cells = <0>; + #clock-cells = <0>; + clocks = <&gcc GCC_USB0_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "gcc_usb0_pipe_clk_src"; + }; + }; + + qusb_phy_0: qusb@79000 { + compatible = "qcom,ipq6018-qusb2-phy"; + reg = <0x0 0x00079000 0x0 0x180>; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, + <&xo>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2_0_PHY_BCR>; + status = "disabled"; + }; + + pcie_phy: phy@84000 { + compatible = "qcom,ipq6018-qmp-pcie-phy"; + reg = <0x0 0x00084000 0x0 0x1bc>; /* Serdes PLL */ + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_PCIE0_AUX_CLK>, + <&gcc GCC_PCIE0_AHB_CLK>; + clock-names = "aux", "cfg_ahb"; + + resets = <&gcc GCC_PCIE0_PHY_BCR>, + <&gcc GCC_PCIE0PHY_PHY_BCR>; + reset-names = "phy", + "common"; + + pcie_phy0: phy@84200 { + reg = <0x0 0x00084200 0x0 0x16c>, /* Serdes Tx */ + <0x0 0x00084400 0x0 0x200>, /* Serdes Rx */ + <0x0 0x00084800 0x0 0x1f0>, /* PCS: Lane0, COM, PCIE */ + <0x0 0x00084c00 0x0 0xf4>; /* pcs_misc */ + #phy-cells = <0>; + + clocks = <&gcc GCC_PCIE0_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "gcc_pcie0_pipe_clk_src"; + #clock-cells = <0>; + }; + }; + + mdio: mdio@90000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "qcom,ipq6018-mdio", "qcom,ipq4019-mdio"; + reg = <0x0 0x00090000 0x0 0x64>; + clocks = <&gcc GCC_MDIO_AHB_CLK>; + clock-names = "gcc_mdio_ahb_clk"; + status = "disabled"; + }; + prng: qrng@e1000 { compatible = "qcom,prng-ee"; - reg = <0x0 0xe3000 0x0 0x1000>; + reg = <0x0 0x000e3000 0x0 0x1000>; clocks = <&gcc GCC_PRNG_AHB_CLK>; clock-names = "core"; }; @@ -201,8 +323,8 @@ compatible = "qcom,crypto-v5.1"; reg = <0x0 0x0073a000 0x0 0x6000>; clocks = <&gcc GCC_CRYPTO_AHB_CLK>, - <&gcc GCC_CRYPTO_AXI_CLK>, - <&gcc GCC_CRYPTO_CLK>; + <&gcc GCC_CRYPTO_AXI_CLK>, + <&gcc GCC_CRYPTO_CLK>; clock-names = "iface", "bus", "core"; dmas = <&cryptobam 2>, <&cryptobam 3>; dma-names = "rx", "tx"; @@ -257,6 +379,41 @@ reg = <0x0 0x01937000 0x0 0x21000>; }; + usb2: usb@70f8800 { + compatible = "qcom,ipq6018-dwc3", "qcom,dwc3"; + reg = <0x0 0x070f8800 0x0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&gcc GCC_USB1_MASTER_CLK>, + <&gcc GCC_USB1_SLEEP_CLK>, + <&gcc GCC_USB1_MOCK_UTMI_CLK>; + clock-names = "core", + "sleep", + "mock_utmi"; + + assigned-clocks = <&gcc GCC_USB1_MASTER_CLK>, + <&gcc GCC_USB1_MOCK_UTMI_CLK>; + assigned-clock-rates = <133330000>, + <24000000>; + resets = <&gcc GCC_USB1_BCR>; + status = "disabled"; + + dwc_1: usb@7000000 { + compatible = "snps,dwc3"; + reg = <0x0 0x07000000 0x0 0xcd00>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; + phys = <&qusb_phy_1>; + phy-names = "usb2-phy"; + tx-fifo-resize; + snps,is-utmi-l1-suspend; + snps,hird-threshold = /bits/ 8 <0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_u3_susphy_quirk; + dr_mode = "host"; + }; + }; + blsp_dma: dma-controller@7884000 { compatible = "qcom,bam-v1.7.0"; reg = <0x0 0x07884000 0x0 0x2b000>; @@ -272,7 +429,7 @@ reg = <0x0 0x078b1000 0x0 0x200>; interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, - <&gcc GCC_BLSP1_AHB_CLK>; + <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; status = "disabled"; }; @@ -285,7 +442,7 @@ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; spi-max-frequency = <50000000>; clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, - <&gcc GCC_BLSP1_AHB_CLK>; + <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; dmas = <&blsp_dma 12>, <&blsp_dma 13>; dma-names = "tx", "rx"; @@ -300,7 +457,7 @@ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; spi-max-frequency = <50000000>; clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>, - <&gcc GCC_BLSP1_AHB_CLK>; + <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; dmas = <&blsp_dma 14>, <&blsp_dma 15>; dma-names = "tx", "rx"; @@ -358,24 +515,67 @@ clock-names = "core", "aon"; dmas = <&qpic_bam 0>, - <&qpic_bam 1>, - <&qpic_bam 2>; + <&qpic_bam 1>, + <&qpic_bam 2>; dma-names = "tx", "rx", "cmd"; pinctrl-0 = <&qpic_pins>; pinctrl-names = "default"; status = "disabled"; }; + usb3: usb@8af8800 { + compatible = "qcom,ipq6018-dwc3", "qcom,dwc3"; + reg = <0x0 0x08af8800 0x0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>, + <&gcc GCC_USB0_MASTER_CLK>, + <&gcc GCC_USB0_SLEEP_CLK>, + <&gcc GCC_USB0_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", + "core", + "sleep", + "mock_utmi"; + + assigned-clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>, + <&gcc GCC_USB0_MASTER_CLK>, + <&gcc GCC_USB0_MOCK_UTMI_CLK>; + assigned-clock-rates = <133330000>, + <133330000>, + <20000000>; + + resets = <&gcc GCC_USB0_BCR>; + status = "disabled"; + + dwc_0: usb@8a00000 { + compatible = "snps,dwc3"; + reg = <0x0 0x08a00000 0x0 0xcd00>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; + phys = <&qusb_phy_0>, <&usb0_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + clocks = <&xo>; + clock-names = "ref"; + tx-fifo-resize; + snps,is-utmi-l1-suspend; + snps,hird-threshold = /bits/ 8 <0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_u3_susphy_quirk; + dr_mode = "host"; + }; + }; + intc: interrupt-controller@b000000 { compatible = "qcom,msm-qgic2"; #address-cells = <2>; #size-cells = <2>; interrupt-controller; #interrupt-cells = <0x3>; - reg = <0x0 0x0b000000 0x0 0x1000>, /*GICD*/ - <0x0 0x0b002000 0x0 0x1000>, /*GICC*/ - <0x0 0x0b001000 0x0 0x1000>, /*GICH*/ - <0x0 0x0b004000 0x0 0x1000>; /*GICV*/ + reg = <0x0 0x0b000000 0x0 0x1000>, /*GICD*/ + <0x0 0x0b002000 0x0 0x1000>, /*GICC*/ + <0x0 0x0b001000 0x0 0x1000>, /*GICH*/ + <0x0 0x0b004000 0x0 0x1000>; /*GICV*/ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; ranges = <0 0 0 0xb00a000 0 0xffd>; @@ -386,107 +586,6 @@ }; }; - pcie_phy: phy@84000 { - compatible = "qcom,ipq6018-qmp-pcie-phy"; - reg = <0x0 0x84000 0x0 0x1bc>; /* Serdes PLL */ - status = "disabled"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - clocks = <&gcc GCC_PCIE0_AUX_CLK>, - <&gcc GCC_PCIE0_AHB_CLK>; - clock-names = "aux", "cfg_ahb"; - - resets = <&gcc GCC_PCIE0_PHY_BCR>, - <&gcc GCC_PCIE0PHY_PHY_BCR>; - reset-names = "phy", - "common"; - - pcie_phy0: phy@84200 { - reg = <0x0 0x84200 0x0 0x16c>, /* Serdes Tx */ - <0x0 0x84400 0x0 0x200>, /* Serdes Rx */ - <0x0 0x84800 0x0 0x1f0>, /* PCS: Lane0, COM, PCIE */ - <0x0 0x84c00 0x0 0xf4>; /* pcs_misc */ - #phy-cells = <0>; - - clocks = <&gcc GCC_PCIE0_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "gcc_pcie0_pipe_clk_src"; - #clock-cells = <0>; - }; - }; - - pcie0: pci@20000000 { - compatible = "qcom,pcie-ipq6018"; - reg = <0x0 0x20000000 0x0 0xf1d>, - <0x0 0x20000f20 0x0 0xa8>, - <0x0 0x20001000 0x0 0x1000>, - <0x0 0x80000 0x0 0x4000>, - <0x0 0x20100000 0x0 0x1000>; - reg-names = "dbi", "elbi", "atu", "parf", "config"; - - device_type = "pci"; - linux,pci-domain = <0>; - bus-range = <0x00 0xff>; - num-lanes = <1>; - max-link-speed = <3>; - #address-cells = <3>; - #size-cells = <2>; - - phys = <&pcie_phy0>; - phy-names = "pciephy"; - - ranges = <0x81000000 0 0x20200000 0 0x20200000 - 0 0x10000>, /* downstream I/O */ - <0x82000000 0 0x20220000 0 0x20220000 - 0 0xfde0000>; /* non-prefetchable memory */ - - interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "msi"; - - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 75 - IRQ_TYPE_LEVEL_HIGH>, /* int_a */ - <0 0 0 2 &intc 0 78 - IRQ_TYPE_LEVEL_HIGH>, /* int_b */ - <0 0 0 3 &intc 0 79 - IRQ_TYPE_LEVEL_HIGH>, /* int_c */ - <0 0 0 4 &intc 0 83 - IRQ_TYPE_LEVEL_HIGH>; /* int_d */ - - clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>, - <&gcc GCC_PCIE0_AXI_M_CLK>, - <&gcc GCC_PCIE0_AXI_S_CLK>, - <&gcc GCC_PCIE0_AXI_S_BRIDGE_CLK>, - <&gcc PCIE0_RCHNG_CLK>; - clock-names = "iface", - "axi_m", - "axi_s", - "axi_bridge", - "rchng"; - - resets = <&gcc GCC_PCIE0_PIPE_ARES>, - <&gcc GCC_PCIE0_SLEEP_ARES>, - <&gcc GCC_PCIE0_CORE_STICKY_ARES>, - <&gcc GCC_PCIE0_AXI_MASTER_ARES>, - <&gcc GCC_PCIE0_AXI_SLAVE_ARES>, - <&gcc GCC_PCIE0_AHB_ARES>, - <&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>, - <&gcc GCC_PCIE0_AXI_SLAVE_STICKY_ARES>; - reset-names = "pipe", - "sleep", - "sticky", - "axi_m", - "axi_s", - "ahb", - "axi_m_sticky", - "axi_s_sticky"; - - status = "disabled"; - }; - watchdog@b017000 { compatible = "qcom,kpss-wdt"; interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>; @@ -619,147 +718,68 @@ }; }; - mdio: mdio@90000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "qcom,ipq6018-mdio", "qcom,ipq4019-mdio"; - reg = <0x0 0x90000 0x0 0x64>; - clocks = <&gcc GCC_MDIO_AHB_CLK>; - clock-names = "gcc_mdio_ahb_clk"; - status = "disabled"; - }; - - qusb_phy_1: qusb@59000 { - compatible = "qcom,ipq6018-qusb2-phy"; - reg = <0x0 0x059000 0x0 0x180>; - #phy-cells = <0>; - - clocks = <&gcc GCC_USB1_PHY_CFG_AHB_CLK>, - <&xo>; - clock-names = "cfg_ahb", "ref"; - - resets = <&gcc GCC_QUSB2_1_PHY_BCR>; - status = "disabled"; - }; - - usb2: usb@70f8800 { - compatible = "qcom,ipq6018-dwc3", "qcom,dwc3"; - reg = <0x0 0x070F8800 0x0 0x400>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - clocks = <&gcc GCC_USB1_MASTER_CLK>, - <&gcc GCC_USB1_SLEEP_CLK>, - <&gcc GCC_USB1_MOCK_UTMI_CLK>; - clock-names = "core", - "sleep", - "mock_utmi"; - - assigned-clocks = <&gcc GCC_USB1_MASTER_CLK>, - <&gcc GCC_USB1_MOCK_UTMI_CLK>; - assigned-clock-rates = <133330000>, - <24000000>; - resets = <&gcc GCC_USB1_BCR>; - status = "disabled"; - - dwc_1: usb@7000000 { - compatible = "snps,dwc3"; - reg = <0x0 0x7000000 0x0 0xcd00>; - interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; - phys = <&qusb_phy_1>; - phy-names = "usb2-phy"; - tx-fifo-resize; - snps,is-utmi-l1-suspend; - snps,hird-threshold = /bits/ 8 <0x0>; - snps,dis_u2_susphy_quirk; - snps,dis_u3_susphy_quirk; - dr_mode = "host"; - }; - }; + pcie0: pci@20000000 { + compatible = "qcom,pcie-ipq6018"; + reg = <0x0 0x20000000 0x0 0xf1d>, + <0x0 0x20000f20 0x0 0xa8>, + <0x0 0x20001000 0x0 0x1000>, + <0x0 0x80000 0x0 0x4000>, + <0x0 0x20100000 0x0 0x1000>; + reg-names = "dbi", "elbi", "atu", "parf", "config"; - ssphy_0: ssphy@78000 { - compatible = "qcom,ipq6018-qmp-usb3-phy"; - reg = <0x0 0x78000 0x0 0x1C4>; - #address-cells = <2>; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + max-link-speed = <3>; + #address-cells = <3>; #size-cells = <2>; - ranges; - - clocks = <&gcc GCC_USB0_AUX_CLK>, - <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, <&xo>; - clock-names = "aux", "cfg_ahb", "ref"; - - resets = <&gcc GCC_USB0_PHY_BCR>, - <&gcc GCC_USB3PHY_0_PHY_BCR>; - reset-names = "phy","common"; - status = "disabled"; - usb0_ssphy: phy@78200 { - reg = <0x0 0x00078200 0x0 0x130>, /* Tx */ - <0x0 0x00078400 0x0 0x200>, /* Rx */ - <0x0 0x00078800 0x0 0x1F8>, /* PCS */ - <0x0 0x00078600 0x0 0x044>; /* PCS misc */ - #phy-cells = <0>; - #clock-cells = <0>; - clocks = <&gcc GCC_USB0_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "gcc_usb0_pipe_clk_src"; - }; - }; - - qusb_phy_0: qusb@79000 { - compatible = "qcom,ipq6018-qusb2-phy"; - reg = <0x0 0x079000 0x0 0x180>; - #phy-cells = <0>; + phys = <&pcie_phy0>; + phy-names = "pciephy"; - clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, - <&xo>; - clock-names = "cfg_ahb", "ref"; + ranges = <0x81000000 0 0x20200000 0 0x20200000 0 0x10000>, + <0x82000000 0 0x20220000 0 0x20220000 0 0xfde0000>; - resets = <&gcc GCC_QUSB2_0_PHY_BCR>; - status = "disabled"; - }; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; - usb3: usb@8af8800 { - compatible = "qcom,ipq6018-dwc3", "qcom,dwc3"; - reg = <0x0 0x8AF8800 0x0 0x400>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 78 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 79 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 83 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ - clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>, - <&gcc GCC_USB0_MASTER_CLK>, - <&gcc GCC_USB0_SLEEP_CLK>, - <&gcc GCC_USB0_MOCK_UTMI_CLK>; - clock-names = "cfg_noc", - "core", - "sleep", - "mock_utmi"; + clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>, + <&gcc GCC_PCIE0_AXI_M_CLK>, + <&gcc GCC_PCIE0_AXI_S_CLK>, + <&gcc GCC_PCIE0_AXI_S_BRIDGE_CLK>, + <&gcc PCIE0_RCHNG_CLK>; + clock-names = "iface", + "axi_m", + "axi_s", + "axi_bridge", + "rchng"; - assigned-clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>, - <&gcc GCC_USB0_MASTER_CLK>, - <&gcc GCC_USB0_MOCK_UTMI_CLK>; - assigned-clock-rates = <133330000>, - <133330000>, - <20000000>; + resets = <&gcc GCC_PCIE0_PIPE_ARES>, + <&gcc GCC_PCIE0_SLEEP_ARES>, + <&gcc GCC_PCIE0_CORE_STICKY_ARES>, + <&gcc GCC_PCIE0_AXI_MASTER_ARES>, + <&gcc GCC_PCIE0_AXI_SLAVE_ARES>, + <&gcc GCC_PCIE0_AHB_ARES>, + <&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>, + <&gcc GCC_PCIE0_AXI_SLAVE_STICKY_ARES>; + reset-names = "pipe", + "sleep", + "sticky", + "axi_m", + "axi_s", + "ahb", + "axi_m_sticky", + "axi_s_sticky"; - resets = <&gcc GCC_USB0_BCR>; status = "disabled"; - - dwc_0: usb@8a00000 { - compatible = "snps,dwc3"; - reg = <0x0 0x8A00000 0x0 0xcd00>; - interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; - phys = <&qusb_phy_0>, <&usb0_ssphy>; - phy-names = "usb2-phy", "usb3-phy"; - clocks = <&xo>; - clock-names = "ref"; - tx-fifo-resize; - snps,is-utmi-l1-suspend; - snps,hird-threshold = /bits/ 8 <0x0>; - snps,dis_u2_susphy_quirk; - snps,dis_u3_susphy_quirk; - dr_mode = "host"; - }; }; }; @@ -794,26 +814,4 @@ #interrupt-cells = <2>; }; }; - - rpm-glink { - compatible = "qcom,glink-rpm"; - interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; - qcom,rpm-msg-ram = <&rpm_msg_ram>; - mboxes = <&apcs_glb 0>; - - rpm_requests: glink-channel { - compatible = "qcom,rpm-ipq6018"; - qcom,glink-channels = "rpm_requests"; - - regulators { - compatible = "qcom,rpm-mp5496-regulators"; - - ipq6018_s2: s2 { - regulator-min-microvolt = <725000>; - regulator-max-microvolt = <1062500>; - regulator-always-on; - }; - }; - }; - }; }; diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi index 4e51d8e3df04..62d05d740646 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi @@ -137,7 +137,7 @@ #clock-cells = <0>; clocks = <&gcc GCC_USB1_PIPE_CLK>; clock-names = "pipe0"; - clock-output-names = "gcc_usb1_pipe_clk_src"; + clock-output-names = "usb3phy_1_cc_pipe_clk"; }; }; @@ -180,7 +180,7 @@ #clock-cells = <0>; clocks = <&gcc GCC_USB0_PIPE_CLK>; clock-names = "pipe0"; - clock-output-names = "gcc_usb0_pipe_clk_src"; + clock-output-names = "usb3phy_0_cc_pipe_clk"; }; }; @@ -197,9 +197,9 @@ status = "disabled"; }; - pcie_qmp0: phy@86000 { - compatible = "qcom,ipq8074-qmp-pcie-phy"; - reg = <0x00086000 0x1c4>; + pcie_qmp0: phy@84000 { + compatible = "qcom,ipq8074-qmp-gen3-pcie-phy"; + reg = <0x00084000 0x1bc>; #address-cells = <1>; #size-cells = <1>; ranges; @@ -213,15 +213,16 @@ "common"; status = "disabled"; - pcie_phy0: phy@86200 { - reg = <0x86200 0x16c>, - <0x86400 0x200>, - <0x86800 0x4f4>; + pcie_phy0: phy@84200 { + reg = <0x84200 0x16c>, + <0x84400 0x200>, + <0x84800 0x1f0>, + <0x84c00 0xf4>; #phy-cells = <0>; #clock-cells = <0>; clocks = <&gcc GCC_PCIE0_PIPE_CLK>; clock-names = "pipe0"; - clock-output-names = "pcie_0_pipe_clk"; + clock-output-names = "pcie20_phy0_pipe_clk"; }; }; @@ -242,19 +243,19 @@ status = "disabled"; pcie_phy1: phy@8e200 { - reg = <0x8e200 0x16c>, + reg = <0x8e200 0x130>, <0x8e400 0x200>, - <0x8e800 0x4f4>; + <0x8e800 0x1f8>; #phy-cells = <0>; #clock-cells = <0>; clocks = <&gcc GCC_PCIE1_PIPE_CLK>; clock-names = "pipe0"; - clock-output-names = "pcie_1_pipe_clk"; + clock-output-names = "pcie20_phy1_pipe_clk"; }; }; mdio: mdio@90000 { - compatible = "qcom,ipq4019-mdio"; + compatible = "qcom,ipq8074-mdio", "qcom,ipq4019-mdio"; reg = <0x00090000 0x64>; #address-cells = <1>; #size-cells = <0>; @@ -265,6 +266,13 @@ status = "disabled"; }; + qfprom: efuse@a4000 { + compatible = "qcom,ipq8074-qfprom", "qcom,qfprom"; + reg = <0x000a4000 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + }; + prng: rng@e3000 { compatible = "qcom,prng-ee"; reg = <0x000e3000 0x1000>; @@ -765,6 +773,7 @@ linux,pci-domain = <1>; bus-range = <0x00 0xff>; num-lanes = <1>; + max-link-speed = <2>; #address-cells = <3>; #size-cells = <2>; @@ -772,9 +781,9 @@ phy-names = "pciephy"; ranges = <0x81000000 0 0x10200000 0x10200000 - 0 0x100000 /* downstream I/O */ - 0x82000000 0 0x10300000 0x10300000 - 0 0xd00000>; /* non-prefetchable memory */ + 0 0x10000>, /* downstream I/O */ + <0x82000000 0 0x10220000 0x10220000 + 0 0xfde0000>; /* non-prefetchable memory */ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; @@ -817,16 +826,18 @@ }; pcie0: pci@20000000 { - compatible = "qcom,pcie-ipq8074"; + compatible = "qcom,pcie-ipq8074-gen3"; reg = <0x20000000 0xf1d>, <0x20000f20 0xa8>, - <0x00080000 0x2000>, + <0x20001000 0x1000>, + <0x00080000 0x4000>, <0x20100000 0x1000>; - reg-names = "dbi", "elbi", "parf", "config"; + reg-names = "dbi", "elbi", "atu", "parf", "config"; device_type = "pci"; linux,pci-domain = <0>; bus-range = <0x00 0xff>; num-lanes = <1>; + max-link-speed = <3>; #address-cells = <3>; #size-cells = <2>; @@ -834,9 +845,9 @@ phy-names = "pciephy"; ranges = <0x81000000 0 0x20200000 0x20200000 - 0 0x100000 /* downstream I/O */ - 0x82000000 0 0x20300000 0x20300000 - 0 0xd00000>; /* non-prefetchable memory */ + 0 0x10000>, /* downstream I/O */ + <0x82000000 0 0x20220000 0x20220000 + 0 0xfde0000>; /* non-prefetchable memory */ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; @@ -854,28 +865,30 @@ clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>, <&gcc GCC_PCIE0_AXI_M_CLK>, <&gcc GCC_PCIE0_AXI_S_CLK>, - <&gcc GCC_PCIE0_AHB_CLK>, - <&gcc GCC_PCIE0_AUX_CLK>; - + <&gcc GCC_PCIE0_AXI_S_BRIDGE_CLK>, + <&gcc GCC_PCIE0_RCHNG_CLK>; clock-names = "iface", "axi_m", "axi_s", - "ahb", - "aux"; + "axi_bridge", + "rchng"; + resets = <&gcc GCC_PCIE0_PIPE_ARES>, <&gcc GCC_PCIE0_SLEEP_ARES>, <&gcc GCC_PCIE0_CORE_STICKY_ARES>, <&gcc GCC_PCIE0_AXI_MASTER_ARES>, <&gcc GCC_PCIE0_AXI_SLAVE_ARES>, <&gcc GCC_PCIE0_AHB_ARES>, - <&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>; + <&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>, + <&gcc GCC_PCIE0_AXI_SLAVE_STICKY_ARES>; reset-names = "pipe", "sleep", "sticky", "axi_m", "axi_s", "ahb", - "axi_m_sticky"; + "axi_m_sticky", + "axi_s_sticky"; status = "disabled"; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts b/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts new file mode 100644 index 000000000000..ed3fa7b3575b --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts @@ -0,0 +1,295 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-pm8916.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/* + * NOTE: The original firmware from Acer can only boot 32-bit kernels. + * To boot this device tree using arm64 it is necessary to flash 64-bit + * TZ/HYP firmware (e.g. taken from the DragonBoard 410c). + * See https://wiki.postmarketos.org/wiki/Acer_Iconia_Talk_S_(acer-a1-724) + * for suggested installation instructions. + */ + +/ { + model = "Acer Iconia Talk S A1-724"; + compatible = "acer,a1-724", "qcom,msm8916"; + chassis-type = "tablet"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_default>; + + label = "GPIO Buttons"; + + button-volume-up { + label = "Volume Up"; + gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + }; + + usb_id: usb-id { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&msmgpio 110 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_id_default>; + }; +}; + +&blsp_i2c2 { + status = "okay"; + + accelerometer@10 { + compatible = "bosch,bmc150_accel"; + reg = <0x10>; + interrupt-parent = <&msmgpio>; + interrupts = <115 IRQ_TYPE_EDGE_RISING>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + + pinctrl-names = "default"; + pinctrl-0 = <&accel_int_default>; + + mount-matrix = "0", "-1", "0", + "-1", "0", "0", + "0", "0", "1"; + }; + + magnetometer@12 { + compatible = "bosch,bmc150_magn"; + reg = <0x12>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + }; +}; + +&blsp_i2c5 { + status = "okay"; + + touchscreen@38 { + /* Actually ft5446 */ + compatible = "edt,edt-ft5406"; + reg = <0x38>; + + interrupt-parent = <&msmgpio>; + interrupts = <13 IRQ_TYPE_LEVEL_LOW>; + + reset-gpios = <&msmgpio 12 GPIO_ACTIVE_LOW>; + + vcc-supply = <&pm8916_l16>; + iovcc-supply = <&pm8916_l6>; + + touchscreen-size-x = <720>; + touchscreen-size-y = <1280>; + + pinctrl-names = "default"; + pinctrl-0 = <&touchscreen_default>; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&pm8916_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&pm8916_vib { + status = "okay"; +}; + +&pronto { + status = "okay"; +}; + +&sdhc_1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; + + status = "okay"; +}; + +&sdhc_2 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>; + + cd-gpios = <&msmgpio 38 GPIO_ACTIVE_HIGH>; + + status = "okay"; +}; + +&usb { + extcon = <&usb_id>, <&usb_id>; + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&usb_id>; +}; + +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + }; + + l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l8 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2900000>; + }; + + l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l10 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2800000>; + }; + + l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <200000>; + regulator-allow-set-load; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l16 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + }; + + l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + l18 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; +}; + +&msmgpio { + accel_int_default: accel-int-default-state { + pins = "gpio115"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + gpio_keys_default: gpio-keys-default-state { + pins = "gpio107"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + + touchscreen_default: touchscreen-default-state { + reset-pins { + pins = "gpio12"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + touchscreen-pins { + pins = "gpio13"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + usb_id_default: usb-id-default-state { + pins = "gpio110"; + function = "gpio"; + + drive-strength = <8>; + bias-pull-up; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts b/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts new file mode 100644 index 000000000000..a0e520edde02 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts @@ -0,0 +1,299 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-pm8916.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> + +/ { + model = "GPLUS FL8005A"; + compatible = "gplus,fl8005a", "qcom,msm8916"; + chassis-type = "tablet"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + flash-led-controller { + /* Actually qcom,leds-gpio-flash */ + compatible = "sgmicro,sgm3140"; + enable-gpios = <&msmgpio 31 GPIO_ACTIVE_HIGH>; + flash-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&camera_flash_default>; + pinctrl-names = "default"; + + flash_led: led { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + flash-max-timeout-us = <250000>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&gpio_keys_default>; + pinctrl-names = "default"; + + button-volume-up { + label = "Volume Up"; + gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + pinctrl-0 = <&gpio_leds_default>; + pinctrl-names = "default"; + + led-red { + function = LED_FUNCTION_CHARGING; + color = <LED_COLOR_ID_RED>; + gpios = <&msmgpio 117 GPIO_ACTIVE_HIGH>; + retain-state-suspended; + }; + + led-green { + function = LED_FUNCTION_CHARGING; + color = <LED_COLOR_ID_GREEN>; + gpios = <&msmgpio 118 GPIO_ACTIVE_HIGH>; + retain-state-suspended; + }; + }; + + usb_id: usb-id { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&msmgpio 110 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&usb_id_default>; + pinctrl-names = "default"; + }; +}; + +&blsp_i2c5 { + status = "okay"; + + touchscreen@38 { + /* Actually ft5402 */ + compatible = "edt,edt-ft5406"; + reg = <0x38>; + + interrupt-parent = <&msmgpio>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + + reset-gpios = <&msmgpio 12 GPIO_ACTIVE_LOW>; + + vcc-supply = <&pm8916_l17>; + iovcc-supply = <&pm8916_l6>; + + touchscreen-size-x = <800>; + touchscreen-size-y = <500>; + touchscreen-inverted-x; + touchscreen-swapped-x-y; + + pinctrl-0 = <&touchscreen_default>; + pinctrl-names = "default"; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&pm8916_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&pm8916_vib { + status = "okay"; +}; + +&pronto { + status = "okay"; +}; + +&sdhc_1 { + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; + pinctrl-names = "default", "sleep"; + + status = "okay"; +}; + +&sdhc_2 { + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>; + pinctrl-names = "default", "sleep"; + + cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; + + status = "okay"; +}; + +&usb { + extcon = <&usb_id>, <&usb_id>; + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&usb_id>; +}; + +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + }; + + l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l8 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2900000>; + }; + + l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l10 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2800000>; + }; + + l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <200000>; + regulator-allow-set-load; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + l18 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; +}; + +&msmgpio { + camera_flash_default: camera-flash-default-state { + pins = "gpio31", "gpio32"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + gpio_keys_default: gpio-keys-default-state { + pins = "gpio107"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + gpio_leds_default: gpio-led-default-state { + pins = "gpio117", "gpio118"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + touchscreen_default: touchscreen-default-state { + reset-pins { + pins = "gpio12"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + touchscreen-pins { + pins = "gpio13"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + usb_id_default: usb-id-default-state { + pins = "gpio110"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi index d600916a0e55..a2ed7bdbf528 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi @@ -434,7 +434,7 @@ bias-pull-down; }; - motor_en_default: motor-en-default-stae { + motor_en_default: motor-en-default-state { pins = "gpio76"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts index a3d572d851ef..4cbd68b89448 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts @@ -29,8 +29,12 @@ gpio-leds { compatible = "gpio-leds"; - keyled { + led-keyled { + function = LED_FUNCTION_KBD_BACKLIGHT; + color = <LED_COLOR_ID_WHITE>; + gpios = <&msmgpio 60 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; pinctrl-0 = <&gpio_leds_default>; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi new file mode 100644 index 000000000000..d920b7247d82 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi @@ -0,0 +1,296 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-pm8916.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + reserved-memory { + /* Additional memory used by Samsung firmware modifications */ + tz-apps@85500000 { + reg = <0x0 0x85500000 0x0 0xb00000>; + no-map; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&gpio_keys_default>; + pinctrl-names = "default"; + + label = "GPIO Buttons"; + + volume-up-button { + label = "Volume Up"; + gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + + home-button { + label = "Home"; + gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>; + linux,code = <KEY_HOMEPAGE>; + }; + }; + + gpio-hall-sensor { + compatible = "gpio-keys"; + + pinctrl-0 = <&gpio_hall_sensor_default>; + pinctrl-names = "default"; + + label = "GPIO Hall Effect Sensor"; + + hall-sensor-switch { + label = "Hall Effect Sensor"; + gpios = <&msmgpio 52 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + linux,can-disable; + }; + }; +}; + +&blsp_i2c4 { + status = "okay"; + + fuelgauge@36 { + compatible = "maxim,max77849-battery"; + reg = <0x36>; + + maxim,rsns-microohm = <10000>; + maxim,over-heat-temp = <600>; + maxim,over-volt = <4400>; + + interrupt-parent = <&msmgpio>; + interrupts = <121 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-0 = <&fuelgauge_int_default>; + pinctrl-names = "default"; + }; +}; + +&blsp_i2c2 { + status = "okay"; + + light-sensor@10 { + compatible = "capella,cm3323"; + reg = <0x10>; + }; + + accelerometer@1d { + compatible = "st,lis2hh12"; + reg = <0x1d>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l5>; + + interrupt-parent = <&msmgpio>; + interrupts = <115 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "INT1"; + + st,drdy-int-pin = <1>; + mount-matrix = "0", "1", "0", + "-1", "0", "0", + "0", "0", "1"; + + pinctrl-0 = <&accel_int_default>; + pinctrl-names = "default"; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&pm8916_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +/* FIXME: Replace with MAX77849 MUIC when driver is available */ +&pm8916_usbin { + status = "okay"; +}; + +&pronto { + status = "okay"; + + iris { + compatible = "qcom,wcn3660b"; + }; +}; + +&sdhc_1 { + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; + pinctrl-names = "default", "sleep"; + + status = "okay"; +}; + +&sdhc_2 { + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + pinctrl-names = "default", "sleep"; + + cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; + + status = "okay"; +}; + +&usb { + dr_mode = "peripheral"; + extcon = <&pm8916_usbin>; + + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&pm8916_usbin>; +}; + +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + }; + + l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l8 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2900000>; + }; + + l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l10 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2800000>; + }; + + l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <200000>; + regulator-allow-set-load; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + l18 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; +}; + +&msmgpio { + accel_int_default: accel-int-default-state { + pins = "gpio115"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + fuelgauge_int_default: fuelgauge-int-default-state { + pins = "gpio121"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + gpio_keys_default: gpio-keys-default-state { + pins = "gpio107", "gpio109"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + gpio_hall_sensor_default: gpio-hall-sensor-default-state { + pins = "gpio52"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts new file mode 100644 index 000000000000..607a5dc8a534 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts @@ -0,0 +1,113 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-samsung-gt5-common.dtsi" + +/ { + model = "Samsung Galaxy Tab A 9.7 (2015)"; + compatible = "samsung,gt510", "qcom,msm8916"; + chassis-type = "tablet"; + + clk_pwm: pwm { + compatible = "clk-pwm"; + #pwm-cells = <2>; + + clocks = <&gcc GCC_GP2_CLK>; + + pinctrl-0 = <&motor_pwm_default>; + pinctrl-names = "default"; + }; + + reg_motor_vdd: regulator-motor-vdd { + compatible = "regulator-fixed"; + regulator-name = "motor_vdd"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + + gpio = <&msmgpio 76 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&motor_en_default>; + pinctrl-names = "default"; + }; + + reg_tsp_1p8v: regulator-tsp-1p8v { + compatible = "regulator-fixed"; + regulator-name = "tsp_1p8v"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&msmgpio 73 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&tsp_en_default>; + pinctrl-names = "default"; + }; + + reg_tsp_3p3v: regulator-tsp-3p3v { + compatible = "regulator-fixed"; + regulator-name = "tsp_3p3v"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&msmgpio 73 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vibrator { + compatible = "pwm-vibrator"; + + pwms = <&clk_pwm 0 100000>; + pwm-names = "enable"; + + vcc-supply = <®_motor_vdd>; + }; +}; + +&blsp_i2c5 { + status = "okay"; + + touchscreen@4a { + compatible = "atmel,maxtouch"; + reg = <0x4a>; + interrupt-parent = <&msmgpio>; + interrupts = <13 IRQ_TYPE_LEVEL_LOW>; + + vdd-supply = <®_tsp_1p8v>; + vdda-supply = <®_tsp_3p3v>; + + reset-gpios = <&msmgpio 114 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&tsp_int_rst_default>; + pinctrl-names = "default"; + }; +}; + +&msmgpio { + motor_en_default: motor-en-default-state { + pins = "gpio76"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + motor_pwm_default: motor-pwm-default-state { + pins = "gpio50"; + function = "gcc_gp2_clk_a"; + }; + + tsp_en_default: tsp-en-default-state { + pins = "gpio73"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + tsp_int_rst_default: tsp-int-rst-default-state { + pins = "gpio13", "gpio114"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts new file mode 100644 index 000000000000..5d6f8383306b --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts @@ -0,0 +1,75 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-samsung-gt5-common.dtsi" + +/ { + model = "Samsung Galaxy Tab A 8.0 (2015)"; + compatible = "samsung,gt58", "qcom,msm8916"; + chassis-type = "tablet"; + + reg_vdd_tsp: regulator-vdd-tsp { + compatible = "regulator-fixed"; + regulator-name = "vdd_tsp"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&msmgpio 73 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <®_tsp_en_default>; + pinctrl-names = "default"; + }; + + vibrator { + compatible = "gpio-vibrator"; + enable-gpios = <&msmgpio 76 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&vibrator_en_default>; + pinctrl-names = "default"; + }; +}; + +&blsp_i2c5 { + status = "okay"; + + touchscreen@20 { + compatible = "zinitix,bt532"; + reg = <0x20>; + interrupt-parent = <&msmgpio>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + + touchscreen-size-x = <768>; + touchscreen-size-y = <1024>; + + vcca-supply = <®_vdd_tsp>; + vdd-supply = <&pm8916_l6>; + + pinctrl-0 = <&tsp_int_default>; + pinctrl-names = "default"; + }; +}; + +&msmgpio { + reg_tsp_en_default: reg-tsp-en-default-state { + pins = "gpio73"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + tsp_int_default: tsp-int-default-state { + pins = "gpio13"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + vibrator_en_default: vibrator-en-default-state { + pins = "gpio76"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi new file mode 100644 index 000000000000..f3b81b6f0a2f --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi @@ -0,0 +1,262 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include "msm8916-pm8916.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + reserved-memory { + /* Additional memory used by Samsung firmware modifications */ + tz-apps@85500000 { + reg = <0x0 0x85500000 0x0 0xb00000>; + no-map; + }; + }; + + gpio_hall_sensor: gpio-hall-sensor { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_hall_sensor_default>; + + label = "GPIO Hall Effect Sensor"; + + event-hall-sensor { + label = "Hall Effect Sensor"; + gpios = <&msmgpio 52 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + linux,can-disable; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_default>; + + label = "GPIO Buttons"; + + button-volume-up { + label = "Volume Up"; + gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + + button-home { + label = "Home Key"; + gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>; + linux,code = <KEY_HOMEPAGE>; + }; + }; + + i2c_muic: i2c-muic { + compatible = "i2c-gpio"; + sda-gpios = <&msmgpio 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&msmgpio 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + + pinctrl-names = "default"; + pinctrl-0 = <&muic_i2c_default>; + + #address-cells = <1>; + #size-cells = <0>; + + muic: extcon@25 { + compatible = "siliconmitus,sm5703-muic"; + reg = <0x25>; + + interrupt-parent = <&msmgpio>; + interrupts = <12 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&muic_int_default>; + }; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&pm8916_resin { + status = "okay"; + linux,code = <KEY_VOLUMEDOWN>; +}; + +&pronto { + status = "okay"; +}; + +&sdhc_1 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; +}; + +&sdhc_2 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + + cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; +}; + +&usb { + extcon = <&muic>, <&muic>; + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&muic>; +}; + +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + }; + + l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l8 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2900000>; + }; + + l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l10 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2800000>; + }; + + l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l17 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + l18 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; +}; + +&msmgpio { + gpio_hall_sensor_default: gpio-hall-sensor-default-state { + pins = "gpio52"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + gpio_keys_default: gpio-keys-default-state { + pins = "gpio107", "gpio109"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + + muic_i2c_default: muic-i2c-default-state { + pins = "gpio105", "gpio106"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + muic_int_default: muic-int-default-state { + pins = "gpio12"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts index 7ac49a021563..0a32d33e9778 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts @@ -2,208 +2,14 @@ /dts-v1/; -#include "msm8916-pm8916.dtsi" -#include <dt-bindings/gpio/gpio.h> +#include "msm8916-samsung-j5-common.dtsi" / { model = "Samsung Galaxy J5 (2015)"; compatible = "samsung,j5", "qcom,msm8916"; chassis-type = "handset"; - - aliases { - serial0 = &blsp1_uart2; - }; - - chosen { - stdout-path = "serial0"; - }; - - reserved-memory { - /* Additional memory used by Samsung firmware modifications */ - tz-apps@85500000 { - reg = <0x0 0x85500000 0x0 0xb00000>; - no-map; - }; - }; - - gpio-keys { - compatible = "gpio-keys"; - - pinctrl-names = "default"; - pinctrl-0 = <&gpio_keys_default>; - - label = "GPIO Buttons"; - - button-volume-up { - label = "Volume Up"; - gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; - linux,code = <KEY_VOLUMEUP>; - }; - - button-home { - label = "Home Key"; - gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>; - linux,code = <KEY_HOMEPAGE>; - }; - }; -}; - -&blsp1_uart2 { - status = "okay"; -}; - -&pm8916_resin { - status = "okay"; - linux,code = <KEY_VOLUMEDOWN>; -}; - -/* FIXME: Replace with SM5703 MUIC when driver is available */ -&pm8916_usbin { - status = "okay"; -}; - -&pronto { - status = "okay"; -}; - -&sdhc_1 { - status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; - pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; -}; - -&sdhc_2 { - status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; - pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; - - cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; -}; - -&usb { - status = "okay"; - dr_mode = "peripheral"; - extcon = <&pm8916_usbin>; }; &usb_hs_phy { - extcon = <&pm8916_usbin>; qcom,init-seq = /bits/ 8 <0x1 0x19 0x2 0x0b>; }; - -&smd_rpm_regulators { - vdd_l1_l2_l3-supply = <&pm8916_s3>; - vdd_l4_l5_l6-supply = <&pm8916_s4>; - vdd_l7-supply = <&pm8916_s4>; - - s3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1300000>; - }; - - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2100000>; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l8 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2900000>; - }; - - l9 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - l10 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2800000>; - }; - - l11 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - regulator-allow-set-load; - regulator-system-load = <200000>; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l13 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l16 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l17 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - l18 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; -}; - -&msmgpio { - gpio_keys_default: gpio-keys-default-state { - pins = "gpio107", "gpio109"; - function = "gpio"; - - drive-strength = <2>; - bias-pull-up; - }; -}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5x.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5x.dts new file mode 100644 index 000000000000..7e1326cc13c5 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5x.dts @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-samsung-j5-common.dtsi" + +/ { + model = "Samsung Galaxy J5 (2016)"; + compatible = "samsung,j5x", "qcom,msm8916"; + chassis-type = "handset"; +}; + +&muic { + interrupts = <121 IRQ_TYPE_EDGE_FALLING>; +}; + +&muic_int_default { + pins = "gpio121"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-thwc-uf896.dts b/arch/arm64/boot/dts/qcom/msm8916-thwc-uf896.dts new file mode 100644 index 000000000000..c492db856190 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-thwc-uf896.dts @@ -0,0 +1,39 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-ufi.dtsi" + +/ { + model = "uf896 4G Modem Stick"; + compatible = "thwc,uf896", "qcom,msm8916"; +}; + +&button_restart { + gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>; +}; + +&led_r { + gpios = <&msmgpio 82 GPIO_ACTIVE_HIGH>; +}; + +&led_g { + gpios = <&msmgpio 83 GPIO_ACTIVE_HIGH>; +}; + +&led_b { + gpios = <&msmgpio 81 GPIO_ACTIVE_HIGH>; +}; + +&button_default { + pins = "gpio35"; + bias-pull-up; +}; + +&gpio_leds_default { + pins = "gpio81", "gpio82", "gpio83"; +}; + +&sim_ctrl_default { + pins = "gpio1", "gpio2"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts b/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts new file mode 100644 index 000000000000..700cf81cbf8c --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts @@ -0,0 +1,39 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-ufi.dtsi" + +/ { + model = "ufi-001c/ufi-001b 4G Modem Stick"; + compatible = "thwc,ufi001c", "qcom,msm8916"; +}; + +&button_restart { + gpios = <&msmgpio 37 GPIO_ACTIVE_HIGH>; +}; + +&led_r { + gpios = <&msmgpio 22 GPIO_ACTIVE_HIGH>; +}; + +&led_g { + gpios = <&msmgpio 21 GPIO_ACTIVE_HIGH>; +}; + +&led_b { + gpios = <&msmgpio 20 GPIO_ACTIVE_HIGH>; +}; + +&button_default { + pins = "gpio37"; + bias-pull-down; +}; + +&gpio_leds_default { + pins = "gpio20", "gpio21", "gpio22"; +}; + +&sim_ctrl_default { + pins = "gpio1", "gpio2"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi b/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi new file mode 100644 index 000000000000..790a9696da9d --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi @@ -0,0 +1,250 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include "msm8916-pm8916.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> + +/ { + chassis-type = "embedded"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + reserved-memory { + mpss_mem: mpss@86800000 { + reg = <0x0 0x86800000 0x0 0x5500000>; + no-map; + }; + + gps_mem: gps@8bd00000 { + reg = <0x0 0x8bd00000 0x0 0x200000>; + no-map; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&button_default>; + pinctrl-names = "default"; + + label = "GPIO Buttons"; + + /* GPIO is board-specific */ + button_restart: button-restart { + label = "Restart"; + linux,code = <KEY_RESTART>; + }; + }; + + leds { + compatible = "gpio-leds"; + + pinctrl-0 = <&gpio_leds_default>; + pinctrl-names = "default"; + + /* + * GPIOs are board-specific. + * Functions and default-states defined here are fallbacks. + * Feel free to override them if your board is different. + */ + led_r: led-r { + color = <LED_COLOR_ID_RED>; + default-state = "on"; + function = LED_FUNCTION_POWER; + }; + + led_g: led-g { + color = <LED_COLOR_ID_GREEN>; + default-state = "off"; + function = LED_FUNCTION_WLAN; + }; + + led_b: led-b { + color = <LED_COLOR_ID_BLUE>; + default-state = "off"; + function = LED_FUNCTION_WAN; + }; + }; +}; + +&bam_dmux { + status = "okay"; +}; + +&bam_dmux_dma { + status = "okay"; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +/* Remove &dsi_phy0 from clocks to make sure that gcc probes with display disabled */ +&gcc { + clocks = <&xo_board>, <&sleep_clk>, <0>, <0>, <0>, <0>, <0>; +}; + +&mpss { + pinctrl-0 = <&sim_ctrl_default>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pm8916_usbin { + status = "okay"; +}; + +&pronto { + status = "okay"; +}; + +&sdhc_1 { + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; + pinctrl-names = "default", "sleep"; + + status = "okay"; +}; + +&usb { + extcon = <&pm8916_usbin>; + dr_mode = "peripheral"; + + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&pm8916_usbin>; +}; + +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + }; + + l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l8 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2900000>; + }; + + l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l10 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2800000>; + }; + + l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <200000>; + regulator-allow-set-load; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + l18 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; +}; + +&msmgpio { + /* pins are board-specific */ + button_default: button-default-state { + function = "gpio"; + drive-strength = <2>; + }; + + gpio_leds_default: gpio-leds-default-state { + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + sim_ctrl_default: sim-ctrl-default-state { + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 2ca8e977fc2a..0733c2f4f379 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -442,11 +442,70 @@ reg = <0x0005c000 0x1000>; #address-cells = <1>; #size-cells = <1>; - tsens_caldata: caldata@d0 { - reg = <0xd0 0x8>; + + tsens_base1: base1@d0 { + reg = <0xd0 0x1>; + bits = <0 7>; + }; + + tsens_s0_p1: s0-p1@d0 { + reg = <0xd0 0x2>; + bits = <7 5>; + }; + + tsens_s0_p2: s0-p2@d1 { + reg = <0xd1 0x2>; + bits = <4 5>; }; - tsens_calsel: calsel@ec { - reg = <0xec 0x4>; + + tsens_s1_p1: s1-p1@d2 { + reg = <0xd2 0x1>; + bits = <1 5>; + }; + tsens_s1_p2: s1-p2@d2 { + reg = <0xd2 0x2>; + bits = <6 5>; + }; + tsens_s2_p1: s2-p1@d3 { + reg = <0xd3 0x1>; + bits = <3 5>; + }; + + tsens_s2_p2: s2-p2@d4 { + reg = <0xd4 0x1>; + bits = <0 5>; + }; + + // no tsens with hw_id 3 + + tsens_s4_p1: s4-p1@d4 { + reg = <0xd4 0x2>; + bits = <5 5>; + }; + + tsens_s4_p2: s4-p2@d5 { + reg = <0xd5 0x1>; + bits = <2 5>; + }; + + tsens_s5_p1: s5-p1@d5 { + reg = <0xd5 0x2>; + bits = <7 5>; + }; + + tsens_s5_p2: s5-p2@d6 { + reg = <0xd6 0x2>; + bits = <4 5>; + }; + + tsens_base2: base2@d7 { + reg = <0xd7 0x1>; + bits = <1 7>; + }; + + tsens_mode: mode@ec { + reg = <0xef 0x1>; + bits = <5 3>; }; }; @@ -473,8 +532,22 @@ compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1"; reg = <0x004a9000 0x1000>, /* TM */ <0x004a8000 0x1000>; /* SROT */ - nvmem-cells = <&tsens_caldata>, <&tsens_calsel>; - nvmem-cell-names = "calib", "calib_sel"; + + // no hw_id 3 + nvmem-cells = <&tsens_mode>, + <&tsens_base1>, <&tsens_base2>, + <&tsens_s0_p1>, <&tsens_s0_p2>, + <&tsens_s1_p1>, <&tsens_s1_p2>, + <&tsens_s2_p1>, <&tsens_s2_p2>, + <&tsens_s4_p1>, <&tsens_s4_p2>, + <&tsens_s5_p1>, <&tsens_s5_p2>; + nvmem-cell-names = "mode", + "base1", "base2", + "s0_p1", "s0_p2", + "s1_p1", "s1_p2", + "s2_p1", "s2_p2", + "s4_p1", "s4_p2", + "s5_p1", "s5_p2"; #qcom,sensors = <5>; interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "uplow"; @@ -963,7 +1036,7 @@ reg = <0x01937000 0x30000>; }; - mdss: mdss@1a00000 { + mdss: display-subsystem@1a00000 { status = "disabled"; compatible = "qcom,mdss"; reg = <0x01a00000 0x1000>, @@ -988,8 +1061,8 @@ #size-cells = <1>; ranges; - mdp: mdp@1a01000 { - compatible = "qcom,mdp5"; + mdp: display-controller@1a01000 { + compatible = "qcom,msm8916-mdp5", "qcom,mdp5"; reg = <0x01a01000 0x89000>; reg-names = "mdp_phys"; @@ -1021,7 +1094,8 @@ }; dsi0: dsi@1a98000 { - compatible = "qcom,mdss-dsi-ctrl"; + compatible = "qcom,msm8916-dsi-ctrl", + "qcom,mdss-dsi-ctrl"; reg = <0x01a98000 0x25c>; reg-names = "dsi_ctrl"; @@ -1167,7 +1241,7 @@ }; cci: cci@1b0c000 { - compatible = "qcom,msm8916-cci"; + compatible = "qcom,msm8916-cci", "qcom,msm8226-cci"; #address-cells = <1>; #size-cells = <0>; reg = <0x01b0c000 0x1000>; @@ -1521,7 +1595,6 @@ clock-names = "bam_clk"; #dma-cells = <1>; qcom,ee = <0>; - status = "disabled"; }; blsp1_uart1: serial@78af000 { @@ -1559,6 +1632,8 @@ clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; + dmas = <&blsp_dma 4>, <&blsp_dma 5>; + dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c1_default>; pinctrl-1 = <&i2c1_sleep>; @@ -1591,6 +1666,8 @@ clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; + dmas = <&blsp_dma 6>, <&blsp_dma 7>; + dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c2_default>; pinctrl-1 = <&i2c2_sleep>; @@ -1623,6 +1700,8 @@ clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; + dmas = <&blsp_dma 8>, <&blsp_dma 9>; + dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c3_default>; pinctrl-1 = <&i2c3_sleep>; @@ -1655,6 +1734,8 @@ clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; + dmas = <&blsp_dma 10>, <&blsp_dma 11>; + dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c4_default>; pinctrl-1 = <&i2c4_sleep>; @@ -1687,6 +1768,8 @@ clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; + dmas = <&blsp_dma 12>, <&blsp_dma 13>; + dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c5_default>; pinctrl-1 = <&i2c5_sleep>; @@ -1719,6 +1802,8 @@ clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; + dmas = <&blsp_dma 14>, <&blsp_dma 15>; + dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c6_default>; pinctrl-1 = <&i2c6_sleep>; @@ -1998,7 +2083,7 @@ hysteresis = <2000>; type = "passive"; }; - cpu0_1_crit: cpu_crit { + cpu0_1_crit: cpu-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -2028,7 +2113,7 @@ hysteresis = <2000>; type = "passive"; }; - cpu2_3_crit: cpu_crit { + cpu2_3_crit: cpu-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -2058,7 +2143,7 @@ hysteresis = <2000>; type = "passive"; }; - gpu_crit: gpu_crit { + gpu_crit: gpu-crit { temperature = <95000>; hysteresis = <2000>; type = "critical"; diff --git a/arch/arm64/boot/dts/qcom/msm8953-motorola-potter.dts b/arch/arm64/boot/dts/qcom/msm8953-motorola-potter.dts new file mode 100644 index 000000000000..711d84dad9d7 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8953-motorola-potter.dts @@ -0,0 +1,305 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Sireesh Kodali + */ +/dts-v1/; + +#include "msm8953.dtsi" +#include "pm8953.dtsi" +#include "pmi8950.dtsi" + +/delete-node/ &cont_splash_mem; +/delete-node/ &qseecom_mem; + +/ { + model = "Motorola G5 Plus"; + compatible = "motorola,potter", "qcom,msm8953"; + chassis-type = "handset"; + qcom,msm-id = <293 0>; + qcom,board-id = <0x46 0x83a0>; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer@90001000 { + compatible = "simple-framebuffer"; + reg = <0 0x90001000 0 (2220 * 1920 * 3)>; + + width = <1080>; + height = <1920>; + stride = <(1080 * 3)>; + format = "r8g8b8"; + + power-domains = <&gcc MDSS_GDSC>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>, + <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_BYTE0_CLK>, + <&gcc GCC_MDSS_PCLK0_CLK>, + <&gcc GCC_MDSS_ESC0_CLK>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_key_default>; + + key-volume-up { + label = "Volume Up"; + gpios = <&tlmm 85 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + }; + + reserved-memory { + qseecom_mem: qseecom@84300000 { + reg = <0x0 0x84300000 0x0 0x2000000>; + no-map; + }; + + cont_splash_mem: cont-splash@90001000 { + reg = <0x0 0x90001000 0x0 (1080 * 1920 * 3)>; + no-map; + }; + + reserved@aefd2000 { + reg = <0x0 0xaefd2000 0x0 0x2e000>; + no-map; + }; + + reserved@eefe4000 { + reg = <0x0 0xeefe4000 0x0 0x1c000>; + no-map; + }; + + ramoops@ef000000 { + compatible = "ramoops"; + reg = <0x0 0xef000000 0x0 0x80000>; + console-size = <0x40000>; + ftrace-size = <0>; + record-size = <0x3f800>; + pmsg-size = <0x800>; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-always-on; + regulator-boot-on; + }; +}; + +&hsusb_phy { + vdd-supply = <&pm8953_l3>; + vdda-pll-supply = <&pm8953_l7>; + vdda-phy-dpdm-supply = <&pm8953_l13>; + + status = "okay"; +}; + +&i2c_3 { + status = "okay"; + + touchscreen@20 { + reg = <0x20>; + compatible = "syna,rmi4-i2c"; + + interrupt-parent = <&tlmm>; + interrupts = <65 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_reset>; + + vdd-supply = <&pm8953_l22>; + vio-supply = <&pm8953_l6>; + + syna,reset-delay-ms = <200>; + syna,startup-delay-ms = <500>; + }; +}; + +&pm8953_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&pmi8950_wled { + qcom,current-limit-microamp = <25000>; + qcom,num-strings = <3>; + qcom,external-pfet; + qcom,cabc; + + status = "okay"; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-pm8953-regulators"; + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_l1-supply = <&pm8953_s3>; + vdd_l2_l3-supply = <&pm8953_s3>; + vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>; + vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>; + vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>; + + pm8953_s1: s1 { + regulator-min-microvolt = <863000>; + regulator-max-microvolt = <1152000>; + }; + + pm8953_s3: s3 { + regulator-min-microvolt = <1224000>; + regulator-max-microvolt = <1224000>; + }; + + pm8953_s4: s4 { + regulator-min-microvolt = <1896000>; + regulator-max-microvolt = <2048000>; + }; + + pm8953_l1: l1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1100000>; + }; + + pm8953_l2: l2 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + pm8953_l3: l3 { + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <925000>; + regulator-allow-set-load; + }; + + pm8953_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8953_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + pm8953_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1900000>; + }; + + pm8953_l8: l8 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + }; + + pm8953_l9: l9 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; + + pm8953_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8953_l11: l11 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3000000>; + }; + + pm8953_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + }; + + pm8953_l13: l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3125000>; + }; + + pm8953_l15: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8953_l16: l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8953_l17: l17 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3000000>; + }; + + pm8953_l19: l19 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1350000>; + }; + + pm8953_l22: l22 { + regulator-always-on; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2850000>; + }; + + pm8953_l23: l23 { + regulator-min-microvolt = <975000>; + regulator-max-microvolt = <1225000>; + }; + }; +}; + +&sdhc_1 { + vmmc-supply = <&pm8953_l8>; + vqmmc-supply = <&pm8953_l5>; + + status = "okay"; +}; + +&sdhc_2 { + vmmc-supply = <&pm8953_l11>; + vqmmc-supply = <&pm8953_l12>; + + cd-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_off>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <1 2>, <96 4>, <111 1>, <126 1>; + + ts_reset: ts-reset-state { + pins = "gpio64"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; +}; + +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + dr_mode = "peripheral"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-daisy.dts b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-daisy.dts new file mode 100644 index 000000000000..1d672e608653 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-daisy.dts @@ -0,0 +1,325 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Alejandro Tafalla + */ +/dts-v1/; + +#include "msm8953.dtsi" +#include "pm8953.dtsi" +#include "pmi8950.dtsi" + +/delete-node/ &adsp_fw_mem; +/delete-node/ &qseecom_mem; +/delete-node/ &wcnss_fw_mem; + +/ { + model = "Xiaomi Mi A2 Lite"; + compatible = "xiaomi,daisy", "qcom,msm8953"; + chassis-type = "handset"; + qcom,msm-id = <293 0>; + qcom,board-id= <0x1000b 0x9>; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer@90001000 { + compatible = "simple-framebuffer"; + reg = <0 0x90001000 0 (1920 * 2280 * 3)>; + + width = <1080>; + height = <2280>; + stride = <(1080 * 3)>; + format = "r8g8b8"; + + power-domains = <&gcc MDSS_GDSC>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>, + <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_BYTE0_CLK>, + <&gcc GCC_MDSS_PCLK0_CLK>, + <&gcc GCC_MDSS_ESC0_CLK>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_key_default>; + + key-volume-up { + label = "Volume Up"; + gpios = <&tlmm 85 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + }; + + reserved-memory { + qseecom_mem: qseecom@84a00000 { + reg = <0x0 0x84a00000 0x0 0x1900000>; + no-map; + }; + + adsp_fw_mem: adsp@8d600000 { + reg = <0x0 0x8d600000 0x0 0x1200000>; + no-map; + }; + + wcnss_fw_mem: wcnss@8e800000 { + reg = <0x0 0x8e800000 0x0 0x700000>; + no-map; + }; + }; + + /* + * We bitbang on &i2c_4 because BLSP is protected by TZ as sensors are + * normally proxied via ADSP firmware. GPIOs aren't protected. + */ + i2c-sensors { + compatible = "i2c-gpio"; + sda-gpios = <&tlmm 14 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&tlmm 15 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + #address-cells = <1>; + #size-cells = <0>; + + imu@6a { + compatible = "st,lsm6dsl"; + reg = <0x6a>; + vdd-supply = <&pm8953_l10>; + vddio-supply = <&pm8953_l6>; + mount-matrix = "-1", "0", "0", + "0", "-1", "0", + "0", "0", "1"; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-always-on; + regulator-boot-on; + }; +}; + +&hsusb_phy { + vdd-supply = <&pm8953_l3>; + vdda-pll-supply = <&pm8953_l7>; + vdda-phy-dpdm-supply = <&pm8953_l13>; + + status = "okay"; +}; + +&i2c_2 { + status = "okay"; + + speaker_codec: audio-codec@3a { + compatible = "maxim,max98927"; + reg = <0x3a>; + + reset-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>; + + vmon-slot-no = <1>; + imon-slot-no = <1>; + interleave_mode = <0>; + + #sound-dai-cells = <0>; + }; +}; + +&i2c_3 { + status = "okay"; + + touchscreen@38 { + compatible = "edt,edt-ft5406"; + reg = <0x38>; + + interrupt-parent = <&tlmm>; + interrupts = <65 IRQ_TYPE_EDGE_FALLING>; + + reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>; + + vcc-supply = <&pm8953_l10>; + + touchscreen-size-x = <1080>; + touchscreen-size-y = <2280>; + }; +}; + +&pm8953_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&pmi8950_wled { + qcom,current-limit-microamp = <20000>; + qcom,num-strings = <2>; + + status = "okay"; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-pm8953-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_l1-supply = <&pm8953_s3>; + vdd_l2_l3-supply = <&pm8953_s3>; + vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>; + vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>; + vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>; + + pm8953_s1: s1 { + regulator-min-microvolt = <863000>; + regulator-max-microvolt = <1152000>; + }; + + pm8953_s3: s3 { + regulator-min-microvolt = <1224000>; + regulator-max-microvolt = <1224000>; + }; + + pm8953_s4: s4 { + regulator-min-microvolt = <1896000>; + regulator-max-microvolt = <2048000>; + }; + + pm8953_l1: l1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1100000>; + }; + + pm8953_l2: l2 { + regulator-min-microvolt = <975000>; + regulator-max-microvolt = <1225000>; + }; + + pm8953_l3: l3 { + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <925000>; + regulator-allow-set-load; + }; + + pm8953_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8953_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + pm8953_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1900000>; + }; + + pm8953_l8: l8 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + }; + + pm8953_l9: l9 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; + + pm8953_l10: l10 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + + pm8953_l11: l11 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + pm8953_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8953_l13: l13 { + regulator-min-microvolt = <3125000>; + regulator-max-microvolt = <3125000>; + }; + + pm8953_l16: l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8953_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8953_l19: l19 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1350000>; + }; + + pm8953_l22: l22 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + + pm8953_l23: l23 { + regulator-min-microvolt = <975000>; + regulator-max-microvolt = <1225000>; + }; + }; +}; + +&sdhc_1 { + vmmc-supply = <&pm8953_l8>; + vqmmc-supply = <&pm8953_l5>; + + status = "okay"; +}; + +&sdhc_2 { + vmmc-supply = <&pm8953_l11>; + vqmmc-supply = <&pm8953_l12>; + + cd-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <16 4>, <135 4>; +}; + +&uart_0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart_console_active>; + + status = "okay"; +}; + +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + dr_mode = "peripheral"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-mido.dts b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-mido.dts new file mode 100644 index 000000000000..ed95d09cedb1 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-mido.dts @@ -0,0 +1,329 @@ +// SPDX-License-Identifier: BSD-3-Clause +/dts-v1/; + +#include "msm8953.dtsi" +#include "pm8953.dtsi" +#include "pmi8950.dtsi" +#include <dt-bindings/leds/common.h> + +/delete-node/ &cont_splash_mem; +/delete-node/ &qseecom_mem; + +/ { + model = "Xiaomi Redmi Note 4X"; + compatible = "xiaomi,mido", "qcom,msm8953"; + chassis-type = "handset"; + qcom,msm-id = <293 0>; + qcom,board-id = <11 0>; + + aliases { + mmc0 = &sdhc_1; + mmc1 = &sdhc_2; + }; + + speaker_amp: audio-amplifier { + compatible = "awinic,aw8738"; + mode-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + awinic,mode = <5>; + sound-name-prefix = "Speaker Amp"; + }; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer@90001000 { + compatible = "simple-framebuffer"; + reg = <0 0x90001000 0 (1920 * 1080 * 3)>; + + width = <1080>; + height = <1920>; + stride = <(1080 * 3)>; + format = "r8g8b8"; + + power-domains = <&gcc MDSS_GDSC>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>, + <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_BYTE0_CLK>, + <&gcc GCC_MDSS_PCLK0_CLK>, + <&gcc GCC_MDSS_ESC0_CLK>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_key_default>; + + key-volume-up { + label = "Volume Up"; + gpios = <&tlmm 85 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + }; + + reserved-memory { + qseecom_mem: qseecom@84a00000 { + reg = <0x0 0x84a00000 0x0 0x1900000>; + no-map; + }; + + cont_splash_mem: cont-splash@90001000 { + reg = <0x0 0x90001000 0x0 (1080 * 1920 * 3)>; + no-map; + }; + + ramoops@9ff00000 { + compatible = "ramoops"; + reg = <0x0 0x9ff00000 0x0 0x00100000>; + console-size = <0x100000>; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&hsusb_phy { + vdd-supply = <&pm8953_l3>; + vdda-pll-supply = <&pm8953_l7>; + vdda-phy-dpdm-supply = <&pm8953_l13>; + + status = "okay"; +}; + +&i2c_2 { + status = "okay"; + + led-controller@45 { + compatible = "awinic,aw2013"; + reg = <0x45>; + + vcc-supply = <&pm8953_l10>; + + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_INDICATOR; + led-max-microamp = <5000>; + }; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_INDICATOR; + led-max-microamp = <5000>; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_INDICATOR; + led-max-microamp = <5000>; + }; + }; +}; + +&i2c_3 { + status = "okay"; + + touchscreen@38 { + compatible = "edt,edt-ft5406"; + reg = <0x38>; + + interrupt-parent = <&tlmm>; + interrupts = <65 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_active>; + + reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>; + + vcc-supply = <&pm8953_l10>; + + touchscreen-size-x = <1080>; + touchscreen-size-y = <1920>; + }; +}; + +&pm8953_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-pm8953-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_l1-supply = <&pm8953_s3>; + vdd_l2_l3-supply = <&pm8953_s3>; + vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>; + vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>; + vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>; + vdd_l23-supply = <&pm8953_s3>; + + pm8953_s1: s1 { + regulator-min-microvolt = <863000>; + regulator-max-microvolt = <1152000>; + }; + + pm8953_s3: s3 { + regulator-min-microvolt = <1224000>; + regulator-max-microvolt = <1224000>; + }; + + pm8953_s4: s4 { + regulator-min-microvolt = <1896000>; + regulator-max-microvolt = <2048000>; + }; + + pm8953_l1: l1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1100000>; + }; + + pm8953_l2: l2 { + regulator-min-microvolt = <975000>; + regulator-max-microvolt = <1225000>; + }; + + pm8953_l3: l3 { + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <925000>; + regulator-allow-set-load; + }; + + pm8953_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8953_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + pm8953_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1900000>; + }; + + pm8953_l8: l8 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + }; + + pm8953_l9: l9 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; + + pm8953_l10: l10 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + + pm8953_l11: l11 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + pm8953_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8953_l13: l13 { + regulator-min-microvolt = <3125000>; + regulator-max-microvolt = <3125000>; + }; + + pm8953_l16: l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8953_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8953_l19: l19 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1350000>; + }; + + pm8953_l22: l22 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + + pm8953_l23: l23 { + regulator-min-microvolt = <975000>; + regulator-max-microvolt = <1225000>; + }; + }; +}; + +&sdhc_1 { + vmmc-supply = <&pm8953_l8>; + vqmmc-supply = <&pm8953_l5>; + + status = "okay"; +}; + +&sdhc_2 { + vmmc-supply = <&pm8953_l11>; + vqmmc-supply = <&pm8953_l12>; + + cd-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <135 4>; + + ts_int_active: ts-int-active-state { + pins = "gpio65"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; +}; + +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + dr_mode = "peripheral"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-tissot.dts b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-tissot.dts new file mode 100644 index 000000000000..831d3a42b583 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-tissot.dts @@ -0,0 +1,325 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Danila Tikhonov <JIaxyga@protonmail.com> + * Copyright (c) 2022, Anton Bambura <jenneron@protonmail.com> + */ +/dts-v1/; + +#include "msm8953.dtsi" +#include "pm8953.dtsi" +#include "pmi8950.dtsi" +#include <dt-bindings/leds/common.h> + +/delete-node/ &adsp_fw_mem; +/delete-node/ &qseecom_mem; +/delete-node/ &wcnss_fw_mem; + +/ { + model = "Xiaomi Mi A1"; + compatible = "xiaomi,tissot", "qcom,msm8953"; + chassis-type = "handset"; + qcom,msm-id = <293 0>; + qcom,board-id = <0x1000b 0x00>; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_key_default>, <&gpio_hall_sensor_default>; + + event-hall-sensor { + label = "Hall Effect Sensor"; + gpios = <&tlmm 44 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + linux,can-disable; + }; + + key-volume-up { + label = "Volume Up"; + gpios = <&tlmm 85 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + }; + + reserved-memory { + qseecom_mem: qseecom@84a00000 { + reg = <0x0 0x84a00000 0x0 0x1900000>; + no-map; + }; + + adsp_fw_mem: adsp@8d600000 { + reg = <0x0 0x8d600000 0x0 0x1200000>; + no-map; + }; + + wcnss_fw_mem: wcnss@8e800000 { + reg = <0x0 0x8e800000 0x0 0x700000>; + no-map; + }; + + ramoops@9ff00000 { + compatible = "ramoops"; + reg = <0x0 0x9ff00000 0x0 0x00100000>; + record-size = <0x1000>; + console-size = <0x80000>; + ftrace-size = <0x1000>; + pmsg-size = <0x8000>; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-always-on; + regulator-boot-on; + }; +}; + +&hsusb_phy { + vdd-supply = <&pm8953_l3>; + vdda-pll-supply = <&pm8953_l7>; + vdda-phy-dpdm-supply = <&pm8953_l13>; + + status = "okay"; +}; + +&i2c_2 { + status = "okay"; + + max98927_codec: audio-codec@3a { + compatible = "maxim,max98927"; + reg = <0x3a>; + + reset-gpios = <&tlmm 86 GPIO_ACTIVE_LOW>; + + vmon-slot-no = <1>; + imon-slot-no = <1>; + + #sound-dai-cells = <1>; + }; + + led-controller@45 { + compatible = "awinic,aw2013"; + reg = <0x45>; + + vcc-supply = <&pm8953_l10>; + + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + led-max-microamp = <5000>; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_WHITE>; + }; + }; +}; + +&i2c_3 { + status = "okay"; + + touchscreen@38 { + compatible = "edt,edt-ft5406"; + reg = <0x38>; + + interrupt-parent = <&tlmm>; + interrupts = <65 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_default>; + + reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>; + + vcc-supply = <&pm8953_l10>; + + touchscreen-size-x = <1080>; + touchscreen-size-y = <1920>; + }; +}; + +&pm8953_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&pmi8950_wled { + qcom,num-strings = <2>; + qcom,external-pfet; + qcom,cabc; + + status = "okay"; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-pm8953-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_l1-supply = <&pm8953_s3>; + vdd_l2_l3-supply = <&pm8953_s3>; + vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>; + vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>; + vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>; + + pm8953_s1: s1 { + regulator-min-microvolt = <870000>; + regulator-max-microvolt = <1156000>; + }; + + pm8953_s3: s3 { + regulator-min-microvolt = <1224000>; + regulator-max-microvolt = <1224000>; + }; + + pm8953_s4: s4 { + regulator-min-microvolt = <1900000>; + regulator-max-microvolt = <2050000>; + }; + + pm8953_l1: l1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + pm8953_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1225000>; + }; + + pm8953_l3: l3 { + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <925000>; + }; + + pm8953_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8953_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8953_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1900000>; + }; + + pm8953_l8: l8 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + }; + + pm8953_l9: l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + pm8953_l10:l10 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8953_l11: l11 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + pm8953_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8953_l13: l13 { + regulator-min-microvolt = <3125000>; + regulator-max-microvolt = <3125000>; + }; + + pm8953_l16: l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8953_l17: l17 { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <2850000>; + }; + + pm8953_l19: l19 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1350000>; + }; + + pm8953_l22: l22 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + pm8953_l23: l23 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1225000>; + }; + }; +}; + +&sdhc_1 { + vmmc-supply = <&pm8953_l8>; + vqmmc-supply = <&pm8953_l5>; + + status = "okay"; +}; + +&sdhc_2 { + vmmc-supply = <&pm8953_l11>; + vqmmc-supply = <&pm8953_l12>; + + cd-gpios = <&tlmm 133 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <16 4>, <135 4>; + + gpio_hall_sensor_default: gpio-hall-sensor-state { + pins = "gpio44"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + ts_int_default: ts-int-default-state { + pins = "gpio65"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; +}; + +&uart_0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart_console_active>; + + status = "okay"; +}; + +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + dr_mode = "peripheral"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-vince.dts b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-vince.dts new file mode 100644 index 000000000000..b5be55034fd3 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-vince.dts @@ -0,0 +1,361 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Eugene Lepshy <fekz115@gmail.com> + * Copyright (c) 2022, Gianluca Boiano <morf3089@gmail.com> + */ +/dts-v1/; + +#include "msm8953.dtsi" +#include "pm8953.dtsi" +#include "pmi8950.dtsi" +#include <dt-bindings/leds/common.h> + +/delete-node/ &adsp_fw_mem; +/delete-node/ &cont_splash_mem; +/delete-node/ &qseecom_mem; +/delete-node/ &wcnss_fw_mem; + +/ { + model = "Xiaomi Redmi 5 Plus"; + compatible = "xiaomi,vince", "qcom,msm8953"; + chassis-type = "handset"; + qcom,msm-id = <293 0>; + qcom,board-id= <0x1000b 0x08>; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_key_default>; + + key-volume-up { + label = "volume_up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&tlmm 85 GPIO_ACTIVE_LOW>; + }; + }; + + reserved-memory { + qseecom_mem: qseecom@84a00000 { + reg = <0x0 0x84a00000 0x0 0x1900000>; + no-map; + }; + + cont_splash_mem: cont-splash@90001000 { + reg = <0x0 0x90001000 0x0 (1080 * 2160 * 3)>; + no-map; + }; + + adsp_fw_mem: adsp@8d600000 { + reg = <0x0 0x8d600000 0x0 0x1200000>; + no-map; + }; + + wcnss_fw_mem: wcnss@8e800000 { + reg = <0x0 0x8e800000 0x0 0x700000>; + no-map; + }; + + ramoops@9ff00000 { + compatible = "ramoops"; + reg = <0x0 0x9ff00000 0x0 0x100000>; + record-size = <0x1000>; + console-size = <0x80000>; + ftrace-size = <0x1000>; + pmsg-size = <0x8000>; + }; + }; + + /* + * We bitbang on &i2c_4 because BLSP is protected by TZ as sensors are + * normally proxied via ADSP firmware. GPIOs aren't protected. + */ + i2c-sensors { + compatible = "i2c-gpio"; + sda-gpios = <&tlmm 14 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&tlmm 15 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + #address-cells = <1>; + #size-cells = <0>; + + imu@6a { + compatible = "st,lsm6dsl"; + reg = <0x6a>; + vdd-supply = <&pm8953_l10>; + vddio-supply = <&pm8953_l6>; + mount-matrix = "1", "0", "0", + "0", "-1", "0", + "0", "0", "1"; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-always-on; + regulator-boot-on; + }; +}; + +&hsusb_phy { + vdd-supply = <&pm8953_l3>; + vdda-pll-supply = <&pm8953_l7>; + vdda-phy-dpdm-supply = <&pm8953_l13>; + + status = "okay"; +}; + +&i2c_2 { + status = "okay"; + + led-controller@45 { + compatible = "awinic,aw2013"; + reg = <0x45>; + + vcc-supply = <&pm8953_l10>; + + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + led-max-microamp = <5000>; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_WHITE>; + }; + }; +}; + +&i2c_3 { + status = "okay"; + + touchscreen@20 { + reg = <0x20>; + compatible = "syna,rmi4-i2c"; + interrupts-parent = <&tlmm>; + interrupts-extended = <&tlmm 65 IRQ_TYPE_EDGE_FALLING>; + + #address-cells = <1>; + #size-cells = <0>; + + vdd-supply = <&pm8953_l10>; + vio-supply = <&pm8953_l6>; + + pinctrl-names = "init", "suspend"; + pinctrl-0 = <&ts_reset_active &ts_int_active>; + pinctrl-1 = <&ts_reset_suspend &ts_int_suspend>; + syna,reset-delay-ms = <200>; + syna,startup-delay-ms = <500>; + + rmi4-f01@1 { + reg = <0x01>; + syna,nosleep-mode = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + syna,rezero-wait-ms = <20>; + syna,sensor-type = <1>; + touchscreen-x-mm = <68>; + touchscreen-y-mm = <122>; + }; + }; +}; + +&pm8953_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&pmi8950_wled { + qcom,current-limit-microamp = <20000>; + qcom,ovp-millivolt = <29600>; + qcom,num-strings = <2>; + qcom,external-pfet; + qcom,cabc; + + status = "okay"; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-pm8953-regulators"; + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_l1-supply = <&pm8953_s3>; + vdd_l2_l3-supply = <&pm8953_s3>; + vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>; + vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>; + vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>; + + pm8953_s1: s1 { + regulator-min-microvolt = <870000>; + regulator-max-microvolt = <1156000>; + }; + + pm8953_s3: s3 { + regulator-min-microvolt = <984000>; + regulator-max-microvolt = <1224000>; + }; + + pm8953_s4: s4 { + regulator-min-microvolt = <1900000>; + regulator-max-microvolt = <2050000>; + }; + + pm8953_l1: l1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1100000>; + }; + + pm8953_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1225000>; + }; + + pm8953_l3: l3 { + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <925000>; + }; + + pm8953_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8953_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8953_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1900000>; + }; + + pm8953_l8: l8 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + }; + + pm8953_l9: l9 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; + + pm8953_l10: l10 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8953_l11: l11 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + pm8953_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8953_l13: l13 { + regulator-min-microvolt = <3125000>; + regulator-max-microvolt = <3125000>; + }; + + pm8953_l16: l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8953_l17: l17 { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <2850000>; + }; + + pm8953_l19: l19 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1380000>; + }; + + pm8953_l22: l22 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + pm8953_l23: l23 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1225000>; + }; + }; +}; + +&sdhc_1 { + vmmc-supply = <&pm8953_l8>; + vqmmc-supply = <&pm8953_l5>; + + status = "okay"; +}; + +&sdhc_2 { + vmmc-supply = <&pm8953_l11>; + vqmmc-supply = <&pm8953_l12>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <16 4>, <135 4>; + + ts_reset_active: ts-reset-active-state { + pins = "gpio64"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + ts_reset_suspend: ts-reset-suspend-state { + pins = "gpio64"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + ts_int_active: ts-int-active-state { + pins = "gpio65"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + ts_int_suspend: ts-int-suspend-state { + pins = "gpio65"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; +}; + +&uart_0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart_console_active>; + + status = "okay"; +}; + +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + dr_mode = "peripheral"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi index 32349174c4bd..610f3e3fc0c2 100644 --- a/arch/arm64/boot/dts/qcom/msm8953.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi @@ -42,13 +42,6 @@ capacity-dmips-mhz = <1024>; next-level-cache = <&L2_0>; #cooling-cells = <2>; - - l1-icache { - compatible = "cache"; - }; - l1-dcache { - compatible = "cache"; - }; }; CPU1: cpu@1 { @@ -59,13 +52,6 @@ capacity-dmips-mhz = <1024>; next-level-cache = <&L2_0>; #cooling-cells = <2>; - - l1-icache { - compatible = "cache"; - }; - l1-dcache { - compatible = "cache"; - }; }; CPU2: cpu@2 { @@ -76,13 +62,6 @@ capacity-dmips-mhz = <1024>; next-level-cache = <&L2_0>; #cooling-cells = <2>; - - l1-icache { - compatible = "cache"; - }; - l1-dcache { - compatible = "cache"; - }; }; CPU3: cpu@3 { @@ -93,13 +72,6 @@ capacity-dmips-mhz = <1024>; next-level-cache = <&L2_0>; #cooling-cells = <2>; - - l1-icache { - compatible = "cache"; - }; - l1-dcache { - compatible = "cache"; - }; }; CPU4: cpu@100 { @@ -110,13 +82,6 @@ capacity-dmips-mhz = <1024>; next-level-cache = <&L2_1>; #cooling-cells = <2>; - - l1-icache { - compatible = "cache"; - }; - l1-dcache { - compatible = "cache"; - }; }; CPU5: cpu@101 { @@ -127,13 +92,6 @@ capacity-dmips-mhz = <1024>; next-level-cache = <&L2_1>; #cooling-cells = <2>; - - l1-icache { - compatible = "cache"; - }; - l1-dcache { - compatible = "cache"; - }; }; CPU6: cpu@102 { @@ -144,13 +102,6 @@ capacity-dmips-mhz = <1024>; next-level-cache = <&L2_1>; #cooling-cells = <2>; - - l1-icache { - compatible = "cache"; - }; - l1-dcache { - compatible = "cache"; - }; }; CPU7: cpu@103 { @@ -161,13 +112,6 @@ capacity-dmips-mhz = <1024>; next-level-cache = <&L2_1>; #cooling-cells = <2>; - - l1-icache { - compatible = "cache"; - }; - l1-dcache { - compatible = "cache"; - }; }; cpu-map { @@ -202,12 +146,12 @@ }; }; - L2_0: l2-cache_0 { + L2_0: l2-cache-0 { compatible = "cache"; cache-level = <2>; }; - L2_1: l2-cache_1 { + L2_1: l2-cache-1 { compatible = "cache"; cache-level = <2>; }; @@ -245,18 +189,18 @@ #size-cells = <2>; ranges; - zap_shader_region: memory@81800000 { + zap_shader_region: zap@81800000 { compatible = "shared-dma-pool"; reg = <0x0 0x81800000 0x0 0x2000>; no-map; }; - memory@85b00000 { + qseecom_mem: qseecom@85b00000 { reg = <0x0 0x85b00000 0x0 0x800000>; no-map; }; - smem_mem: memory@86300000 { + smem_mem: smem@86300000 { compatible = "qcom,smem"; reg = <0x0 0x86300000 0x0 0x100000>; qcom,rpm-msg-ram = <&rpm_msg_ram>; @@ -264,47 +208,47 @@ no-map; }; - memory@86400000 { + reserved@86400000 { reg = <0x0 0x86400000 0x0 0x400000>; no-map; }; - mpss_mem: memory@86c00000 { + mpss_mem: mpss@86c00000 { reg = <0x0 0x86c00000 0x0 0x6a00000>; no-map; }; - adsp_fw_mem: memory@8d600000 { + adsp_fw_mem: adsp@8d600000 { reg = <0x0 0x8d600000 0x0 0x1100000>; no-map; }; - wcnss_fw_mem: memory@8e700000 { + wcnss_fw_mem: wcnss@8e700000 { reg = <0x0 0x8e700000 0x0 0x700000>; no-map; }; - memory@90000000 { + dfps_data_mem: dfps-data@90000000 { reg = <0 0x90000000 0 0x1000>; no-map; }; - memory@90001000 { + cont_splash_mem: cont-splash@90001000 { reg = <0x0 0x90001000 0x0 0x13ff000>; no-map; }; - venus_mem: memory@91400000 { + venus_mem: venus@91400000 { reg = <0x0 0x91400000 0x0 0x700000>; no-map; }; - mba_mem: memory@92000000 { + mba_mem: mba@92000000 { reg = <0x0 0x92000000 0x0 0x100000>; no-map; }; - memory@f2d00000 { + rmtfs@f2d00000 { compatible = "qcom,rmtfs-mem"; reg = <0x0 0xf2d00000 0x0 0x180000>; no-map; @@ -455,7 +399,7 @@ reg = <0x1000000 0x300000>; interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; - gpio-ranges = <&tlmm 0 0 155>; + gpio-ranges = <&tlmm 0 0 142>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; @@ -726,7 +670,7 @@ reg = <0x193f044 0x4>; }; - mdss: mdss@1a00000 { + mdss: display-subsystem@1a00000 { compatible = "qcom,mdss"; reg = <0x1a00000 0x1000>, @@ -755,7 +699,7 @@ status = "disabled"; - mdp: mdp@1a01000 { + mdp: display-controller@1a01000 { compatible = "qcom,msm8953-mdp5", "qcom,mdp5"; reg = <0x1a01000 0x89000>; reg-names = "mdp_phys"; @@ -797,7 +741,7 @@ }; dsi0: dsi@1a94000 { - compatible = "qcom,mdss-dsi-ctrl"; + compatible = "qcom,msm8953-dsi-ctrl", "qcom,mdss-dsi-ctrl"; reg = <0x1a94000 0x400>; reg-names = "dsi_ctrl"; @@ -867,7 +811,7 @@ }; dsi1: dsi@1a96000 { - compatible = "qcom,mdss-dsi-ctrl"; + compatible = "qcom,msm8953-dsi-ctrl", "qcom,mdss-dsi-ctrl"; reg = <0x1a96000 0x400>; reg-names = "dsi_ctrl"; diff --git a/arch/arm64/boot/dts/qcom/msm8956.dtsi b/arch/arm64/boot/dts/qcom/msm8956.dtsi index e432512d8716..668e05185c21 100644 --- a/arch/arm64/boot/dts/qcom/msm8956.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8956.dtsi @@ -12,6 +12,10 @@ interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>; }; +&tsens { + compatible = "qcom,msm8956-tsens", "qcom,tsens-v1"; +}; + /* * You might be wondering.. why is it so empty out there? * Well, the SoCs are almost identical. diff --git a/arch/arm64/boot/dts/qcom/msm8976.dtsi b/arch/arm64/boot/dts/qcom/msm8976.dtsi index 05dcb30b0779..2d360d05aa5e 100644 --- a/arch/arm64/boot/dts/qcom/msm8976.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8976.dtsi @@ -481,8 +481,129 @@ #address-cells = <1>; #size-cells = <1>; - tsens_caldata: caldata@218 { - reg = <0x218 0x18>; + tsens_base1: base1@218 { + reg = <0x218 1>; + bits = <0 8>; + }; + + tsens_s0_p1: s0-p1@219 { + reg = <0x219 0x1>; + bits = <0 6>; + }; + + tsens_s0_p2: s0-p2@219 { + reg = <0x219 0x2>; + bits = <6 6>; + }; + + tsens_s1_p1: s1-p1@21a { + reg = <0x21a 0x2>; + bits = <4 6>; + }; + + tsens_s1_p2: s1-p2@21b { + reg = <0x21b 0x1>; + bits = <2 6>; + }; + + tsens_s2_p1: s2-p1@21c { + reg = <0x21c 0x1>; + bits = <0 6>; + }; + + tsens_s2_p2: s2-p2@21c { + reg = <0x21c 0x2>; + bits = <6 6>; + }; + + tsens_s3_p1: s3-p1@21d { + reg = <0x21d 0x2>; + bits = <4 6>; + }; + + tsens_s3_p2: s3-p2@21e { + reg = <0x21e 0x1>; + bits = <2 6>; + }; + + tsens_base2: base2@220 { + reg = <0x220 1>; + bits = <0 8>; + }; + + tsens_s4_p1: s4-p1@221 { + reg = <0x221 0x1>; + bits = <0 6>; + }; + + tsens_s4_p2: s4-p2@221 { + reg = <0x221 0x2>; + bits = <6 6>; + }; + + tsens_s5_p1: s5-p1@222 { + reg = <0x222 0x2>; + bits = <4 6>; + }; + + tsens_s5_p2: s5-p2@223 { + reg = <0x224 0x1>; + bits = <2 6>; + }; + + tsens_s6_p1: s6-p1@224 { + reg = <0x224 0x1>; + bits = <0 6>; + }; + + tsens_s6_p2: s6-p2@224 { + reg = <0x224 0x2>; + bits = <6 6>; + }; + + tsens_s7_p1: s7-p1@225 { + reg = <0x225 0x2>; + bits = <4 6>; + }; + + tsens_s7_p2: s7-p2@226 { + reg = <0x226 0x2>; + bits = <2 6>; + }; + + tsens_mode: mode@228 { + reg = <0x228 1>; + bits = <0 3>; + }; + + tsens_s8_p1: s8-p1@228 { + reg = <0x228 0x2>; + bits = <3 6>; + }; + + tsens_s8_p2: s8-p2@229 { + reg = <0x229 0x1>; + bits = <1 6>; + }; + + tsens_s9_p1: s9-p1@229 { + reg = <0x229 0x2>; + bits = <7 6>; + }; + + tsens_s9_p2: s9-p2@22a { + reg = <0x22a 0x2>; + bits = <5 6>; + }; + + tsens_s10_p1: s10-p1@22b { + reg = <0x22b 0x2>; + bits = <3 6>; + }; + + tsens_s10_p2: s10-p2@22c { + reg = <0x22c 0x1>; + bits = <1 6>; }; }; @@ -492,8 +613,32 @@ <0x004a8000 0x1000>; /* SROT */ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "uplow"; - nvmem-cells = <&tsens_caldata>; - nvmem-cell-names = "calib"; + nvmem-cells = <&tsens_mode>, + <&tsens_base1>, <&tsens_base2>, + <&tsens_s0_p1>, <&tsens_s0_p2>, + <&tsens_s1_p1>, <&tsens_s1_p2>, + <&tsens_s2_p1>, <&tsens_s2_p2>, + <&tsens_s3_p1>, <&tsens_s3_p2>, + <&tsens_s4_p1>, <&tsens_s4_p2>, + <&tsens_s5_p1>, <&tsens_s5_p2>, + <&tsens_s6_p1>, <&tsens_s6_p2>, + <&tsens_s7_p1>, <&tsens_s7_p2>, + <&tsens_s8_p1>, <&tsens_s8_p2>, + <&tsens_s9_p1>, <&tsens_s9_p2>, + <&tsens_s10_p1>, <&tsens_s10_p2>; + nvmem-cell-names = "mode", + "base1", "base2", + "s0_p1", "s0_p2", + "s1_p1", "s1_p2", + "s2_p1", "s2_p2", + "s3_p1", "s3_p2", + "s4_p1", "s4_p2", + "s5_p1", "s5_p2", + "s6_p1", "s6_p2", + "s7_p1", "s7_p2", + "s8_p1", "s8_p2", + "s9_p1", "s9_p2", + "s10_p1", "s10_p2"; #qcom,sensors = <11>; #thermal-sensor-cells = <1>; }; diff --git a/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi index 87c90e93667f..cd77dcb55872 100644 --- a/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi @@ -2,7 +2,8 @@ /* * Copyright (c) 2015, LGE Inc. All rights reserved. * Copyright (c) 2016, The Linux Foundation. All rights reserved. - * Copyright (c) 2021, Petr Vorel <petr.vorel@gmail.com> + * Copyright (c) 2021-2022, Petr Vorel <petr.vorel@gmail.com> + * Copyright (c) 2022, Dominik Kobinski <dominikkobinski314@gmail.com> */ /dts-v1/; @@ -14,6 +15,9 @@ /* cont_splash_mem has different memory mapping */ /delete-node/ &cont_splash_mem; +/* disabled on downstream, conflicts with cont_splash_mem */ +/delete-node/ &dfps_data_mem; + / { model = "LG Nexus 5X"; compatible = "lg,bullhead", "qcom,msm8992"; @@ -48,7 +52,17 @@ }; cont_splash_mem: memory@3400000 { - reg = <0 0x03400000 0 0x1200000>; + reg = <0 0x03400000 0 0xc00000>; + no-map; + }; + + reserved@5000000 { + reg = <0x0 0x05000000 0x0 0x1a00000>; + no-map; + }; + + reserved@6c00000 { + reg = <0x0 0x06c00000 0x0 0x400000>; no-map; }; }; @@ -80,8 +94,8 @@ /* S1, S2, S6 and S12 are managed by RPMPD */ pm8994_s1: s1 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <800000>; + regulator-min-microvolt = <1025000>; + regulator-max-microvolt = <1025000>; }; pm8994_s2: s2 { @@ -237,11 +251,8 @@ }; pm8994_l26: l26 { - /* - * TODO: value from downstream - * regulator-min-microvolt = <987500>; - * fails to apply - */ + regulator-min-microvolt = <987500>; + regulator-max-microvolt = <987500>; }; pm8994_l27: l27 { @@ -255,19 +266,13 @@ }; pm8994_l29: l29 { - /* - * TODO: Unsupported voltage range. - * regulator-min-microvolt = <2800000>; - * regulator-max-microvolt = <2800000>; - */ + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; }; pm8994_l30: l30 { - /* - * TODO: get this verified - * regulator-min-microvolt = <1800000>; - * regulator-max-microvolt = <1800000>; - */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; }; pm8994_l31: l31 { @@ -276,11 +281,8 @@ }; pm8994_l32: l32 { - /* - * TODO: get this verified - * regulator-min-microvolt = <1800000>; - * regulator-max-microvolt = <1800000>; - */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts index b242c272d2af..fcca1ba94da6 100644 --- a/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts +++ b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts @@ -11,6 +11,12 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/gpio-keys.h> +/delete-node/ &adsp_mem; +/delete-node/ &audio_mem; +/delete-node/ &mpss_mem; +/delete-node/ &peripheral_region; +/delete-node/ &rmtfs_mem; + / { model = "Xiaomi Mi 4C"; compatible = "xiaomi,libra", "qcom,msm8992"; @@ -70,25 +76,67 @@ #size-cells = <2>; ranges; - /* This is for getting crash logs using Android downstream kernels */ - ramoops@dfc00000 { - compatible = "ramoops"; - reg = <0x0 0xdfc00000 0x0 0x40000>; - console-size = <0x10000>; - record-size = <0x10000>; - ftrace-size = <0x10000>; - pmsg-size = <0x20000>; + memory_hole: hole@6400000 { + reg = <0 0x06400000 0 0x600000>; + no-map; + }; + + memory_hole2: hole2@6c00000 { + reg = <0 0x06c00000 0 0x2400000>; + no-map; + }; + + mpss_mem: mpss@9000000 { + reg = <0 0x09000000 0 0x5a00000>; + no-map; + }; + + tzapp: tzapp@ea00000 { + reg = <0 0x0ea00000 0 0x1900000>; + no-map; + }; + + mdm_rfsa_mem: mdm-rfsa@ca0b0000 { + reg = <0 0xca0b0000 0 0x10000>; + no-map; + }; + + rmtfs_mem: rmtfs@ca100000 { + compatible = "qcom,rmtfs-mem"; + reg = <0 0xca100000 0 0x180000>; + no-map; + + qcom,client-id = <1>; }; - modem_region: modem_region@9000000 { - reg = <0x0 0x9000000 0x0 0x5a00000>; + audio_mem: audio@cb400000 { + reg = <0 0xcb000000 0 0x400000>; + no-mem; + }; + + qseecom_mem: qseecom@cb400000 { + reg = <0 0xcb400000 0 0x1c00000>; + no-mem; + }; + + adsp_rfsa_mem: adsp-rfsa@cd000000 { + reg = <0 0xcd000000 0 0x10000>; no-map; }; - tzapp: modem_region@ea00000 { - reg = <0x0 0xea00000 0x0 0x1900000>; + sensor_rfsa_mem: sensor-rfsa@cd010000 { + reg = <0 0xcd010000 0 0x10000>; no-map; }; + + ramoops@dfc00000 { + compatible = "ramoops"; + reg = <0 0xdfc00000 0 0x40000>; + console-size = <0x10000>; + record-size = <0x10000>; + ftrace-size = <0x10000>; + pmsg-size = <0x20000>; + }; }; }; @@ -130,11 +178,6 @@ status = "okay"; }; -&peripheral_region { - reg = <0x0 0x7400000 0x0 0x1c00000>; - no-map; -}; - &pm8994_spmi_regulators { VDD_APC0: s8 { regulator-min-microvolt = <680000>; diff --git a/arch/arm64/boot/dts/qcom/msm8992.dtsi b/arch/arm64/boot/dts/qcom/msm8992.dtsi index 10adb4986ef1..02fc3795dbfd 100644 --- a/arch/arm64/boot/dts/qcom/msm8992.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8992.dtsi @@ -37,10 +37,6 @@ compatible = "qcom,rpmcc-msm8992", "qcom,rpmcc"; }; -&tcsr_mutex { - compatible = "qcom,sfpb-mutex"; -}; - &timer { interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, diff --git a/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts index 85abff0e9b3f..7b0f62144c3e 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts +++ b/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts @@ -9,9 +9,6 @@ #include "msm8994.dtsi" -/* Angler's firmware does not report where the memory is allocated */ -/delete-node/ &cont_splash_mem; - / { model = "Huawei Nexus 6P"; compatible = "huawei,angler", "qcom,msm8994"; @@ -28,6 +25,22 @@ chosen { stdout-path = "serial0:115200n8"; }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + tzapp_mem: tzapp@4800000 { + reg = <0 0x04800000 0 0x1900000>; + no-map; + }; + + removed_region: reserved@6300000 { + reg = <0 0x06300000 0 0xD00000>; + no-map; + }; + }; }; &blsp1_uart2 { diff --git a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi index 9b67f0d3820c..4520a7e86d5b 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi @@ -127,98 +127,98 @@ */ uefi_mem: memory@200000 { - reg = <0 0x200000 0 0x100000>; + reg = <0 0x00200000 0 0x100000>; no-map; }; mppark_mem: memory@300000 { - reg = <0 0x300000 0 0x80000>; + reg = <0 0x00300000 0 0x80000>; no-map; }; fbpt_mem: memory@380000 { - reg = <0 0x380000 0 0x1000>; + reg = <0 0x00380000 0 0x1000>; no-map; }; dbg2_mem: memory@381000 { - reg = <0 0x381000 0 0x4000>; + reg = <0 0x00381000 0 0x4000>; no-map; }; capsule_mem: memory@385000 { - reg = <0 0x385000 0 0x1000>; + reg = <0 0x00385000 0 0x1000>; no-map; }; tpmctrl_mem: memory@386000 { - reg = <0 0x386000 0 0x3000>; + reg = <0 0x00386000 0 0x3000>; no-map; }; uefiinfo_mem: memory@389000 { - reg = <0 0x389000 0 0x1000>; + reg = <0 0x00389000 0 0x1000>; no-map; }; reset_mem: memory@389000 { - reg = <0 0x389000 0 0x1000>; + reg = <0 0x00389000 0 0x1000>; no-map; }; resuncached_mem: memory@38e000 { - reg = <0 0x38e000 0 0x72000>; + reg = <0 0x0038e000 0 0x72000>; no-map; }; disp_mem: memory@400000 { - reg = <0 0x400000 0 0x800000>; + reg = <0 0x00400000 0 0x800000>; no-map; }; uefistack_mem: memory@c00000 { - reg = <0 0xc00000 0 0x40000>; + reg = <0 0x00c00000 0 0x40000>; no-map; }; cpuvect_mem: memory@c40000 { - reg = <0 0xc40000 0 0x10000>; + reg = <0 0x00c40000 0 0x10000>; no-map; }; rescached_mem: memory@400000 { - reg = <0 0xc50000 0 0xb0000>; + reg = <0 0x00c50000 0 0xb0000>; no-map; }; tzapps_mem: memory@6500000 { - reg = <0 0x6500000 0 0x500000>; + reg = <0 0x06500000 0 0x500000>; no-map; }; smem_mem: memory@6a00000 { - reg = <0 0x6a00000 0 0x200000>; + reg = <0 0x06a00000 0 0x200000>; no-map; }; hyp_mem: memory@6c00000 { - reg = <0 0x6c00000 0 0x100000>; + reg = <0 0x06c00000 0 0x100000>; no-map; }; tz_mem: memory@6d00000 { - reg = <0 0x6d00000 0 0x160000>; + reg = <0 0x06d00000 0 0x160000>; no-map; }; rfsa_adsp_mem: memory@6e60000 { - reg = <0 0x6e60000 0 0x10000>; + reg = <0 0x06e60000 0 0x10000>; no-map; }; rfsa_mpss_mem: memory@6e70000 { compatible = "qcom,rmtfs-mem"; - reg = <0 0x6e70000 0 0x10000>; + reg = <0 0x06e70000 0 0x10000>; no-map; qcom,client-id = <1>; @@ -229,7 +229,7 @@ * MPSS_EFS / SBL */ mba_mem: memory@6e80000 { - reg = <0 0x6e80000 0 0x180000>; + reg = <0 0x06e80000 0 0x180000>; no-map; }; @@ -239,33 +239,33 @@ */ mpss_mem: memory@7000000 { - reg = <0 0x7000000 0 0x5a00000>; + reg = <0 0x07000000 0 0x5a00000>; no-map; }; adsp_mem: memory@ca00000 { - reg = <0 0xca00000 0 0x1800000>; + reg = <0 0x0ca00000 0 0x1800000>; no-map; }; venus_mem: memory@e200000 { - reg = <0 0xe200000 0 0x500000>; + reg = <0 0x0e200000 0 0x500000>; no-map; }; pil_metadata_mem: memory@e700000 { - reg = <0 0xe700000 0 0x4000>; + reg = <0 0x0e700000 0 0x4000>; no-map; }; memory@e704000 { - reg = <0 0xe704000 0 0x7fc000>; + reg = <0 0x0e704000 0 0x7fc000>; no-map; }; /* Peripheral Image loader region end */ cnss_mem: memory@ef00000 { - reg = <0 0xef00000 0 0x300000>; + reg = <0 0x0ef00000 0 0x300000>; no-map; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi index f3d153c34918..3ceb86b06209 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi @@ -163,7 +163,7 @@ * mainline Linux. */ &cont_splash_mem { - reg = <0 0x3401000 0 0x2200000>; + reg = <0 0x03401000 0 0x2200000>; }; &pmi8994_spmi_regulators { diff --git a/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi index 20f5c103c63b..2994337c6046 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi @@ -179,7 +179,6 @@ }; &dsi0_phy { - vdda-supply = <&vreg_l2a_1p25>; vcca-supply = <&vreg_l28a_0p925>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi index dec361b93cce..7f4d493a55ff 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi @@ -24,11 +24,7 @@ qcom,board-id = <8 0>; chosen { - /* - * Due to an unknown-for-a-few-years regression, - * SDHCI only works on MSM8996 in PIO (lame) mode. - */ - bootargs = "sdhci.debug_quirks=0x40 sdhci.debug_quirks2=0x4 maxcpus=2"; + bootargs = "maxcpus=2"; }; reserved-memory { @@ -104,8 +100,8 @@ }; &blsp1_i2c3 { - status = "okay"; clock-frequency = <355000>; + status = "okay"; tof_sensor: vl53l0x@29 { compatible = "st,vl53l0x"; @@ -118,15 +114,15 @@ }; &blsp2_i2c5 { - status = "okay"; clock-frequency = <355000>; + status = "okay"; /* FUSB301 USB-C controller */ }; &blsp2_i2c6 { - status = "okay"; clock-frequency = <355000>; + status = "okay"; synaptics@2c { compatible = "syna,rmi4-i2c"; @@ -183,11 +179,10 @@ }; &hsusb_phy1 { - status = "okay"; - vdd-supply = <&pm8994_l28>; vdda-pll-supply = <&pm8994_l12>; vdda-phy-dpdm-supply = <&pm8994_l24>; + status = "okay"; }; &mmcc { @@ -195,18 +190,17 @@ }; &pcie0 { - status = "okay"; perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; wake-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>; vddpe-3v3-supply = <&wlan_en>; vdda-supply = <&pm8994_l28>; + status = "okay"; }; &pcie_phy { - status = "okay"; - vdda-phy-supply = <&pm8994_l28>; vdda-pll-supply = <&pm8994_l12>; + status = "okay"; }; &pm8994_gpios { @@ -478,8 +472,8 @@ }; &pm8994_resin { - status = "okay"; linux,code = <KEY_VOLUMEUP>; + status = "okay"; }; &pmi8994_gpios { @@ -623,9 +617,9 @@ }; &pmi8994_wled { - status = "okay"; default-brightness = <512>; qcom,num-strings = <3>; + status = "okay"; }; &rpm_requests { @@ -825,21 +819,18 @@ }; &sdhc1 { - /* eMMC doesn't seem to cooperate even in PIO mode.. */ - status = "disabled"; - vmmc-supply = <&pm8994_l20>; vqmmc-supply = <&pm8994_s4>; mmc-hs400-1_8v; mmc-hs200-1_8v; + status = "okay"; }; &sdhc2 { - status = "okay"; - cd-gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>; vmmc-supply = <&pm8994_l21>; vqmmc-supply = <&pm8994_l13>; + status = "okay"; }; &tlmm { @@ -943,18 +934,15 @@ }; }; -/* - * For reasons that are currently unknown (but probably related to fusb301), USB takes about - * 6 minutes to wake up (nothing interesting in kernel logs), but then it works as it should. - */ &usb3 { - status = "okay"; qcom,select-utmi-as-pipe-clk; + status = "okay"; }; &usb3_dwc3 { extcon = <&usb3_id>; dr_mode = "peripheral"; + maximum-speed = "high-speed"; phys = <&hsusb_phy1>; phy-names = "usb2-phy"; snps,hird-threshold = /bits/ 8 <0>; diff --git a/arch/arm64/boot/dts/qcom/msm8996-v3.0.dtsi b/arch/arm64/boot/dts/qcom/msm8996-v3.0.dtsi index 5728583af41e..929bdcd45d02 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-v3.0.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996-v3.0.dtsi @@ -19,7 +19,7 @@ * features get enabled upstream. */ -gpu_opp_table_3_0: gpu-opp-table-30 { +gpu_opp_table_3_0: opp-table-gpu30 { compatible = "operating-points-v2"; opp-624000000 { diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi index 5b47b8de69da..2acfed28e3cb 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi @@ -229,7 +229,7 @@ status = "okay"; label = "QCA_UART"; - bluetooth: qca6174a { + bluetooth: bluetooth { compatible = "qcom,qca6174-bt"; enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts index d8734913482f..100123d51494 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts @@ -54,7 +54,7 @@ reg = <0x30>; #address-cells = <1>; #size-cells = <0>; - enable-gpio = <&pm8994_gpios 7 1>; + enable-gpios = <&pm8994_gpios 7 1>; clock-mode = /bits/8 <2>; label = "button-backlight"; @@ -62,14 +62,14 @@ reg = <0>; chan-name = "button-backlight"; led-cur = /bits/ 8 <0x32>; - max-cur = /bits/ 8 <0xC8>; + max-cur = /bits/ 8 <0xc8>; }; led@1 { reg = <0>; chan-name = "button-backlight1"; led-cur = /bits/ 8 <0x32>; - max-cur = /bits/ 8 <0xC8>; + max-cur = /bits/ 8 <0xc8>; }; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index d31464204f69..905678e7175d 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -462,6 +462,12 @@ reg = <0x0 0x91500000 0x0 0x200000>; no-map; }; + + mdata_mem: mpss-metadata { + alloc-ranges = <0x0 0xa0000000 0x0 0x20000000>; + size = <0x0 0x4000>; + no-map; + }; }; rpm-glink { @@ -477,7 +483,7 @@ compatible = "qcom,rpm-msm8996"; qcom,glink-channels = "rpm_requests"; - rpmcc: qcom,rpmcc { + rpmcc: clock-controller { compatible = "qcom,rpmcc-msm8996", "qcom,rpmcc"; #clock-cells = <1>; clocks = <&xo_board>; @@ -713,14 +719,16 @@ #power-domain-cells = <1>; reg = <0x00300000 0x90000>; - clocks = <&rpmcc RPM_SMD_BB_CLK1>, + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&rpmcc RPM_SMD_LN_BB_CLK>, <&sleep_clk>, <&pciephy_0>, <&pciephy_1>, <&pciephy_2>, <&ssusb_phy_0>, - <0>, <0>, <0>; + <&ufsphy_lane 0>, + <&ufsphy_lane 1>, + <&ufsphy_lane 2>; clock-names = "cxo", "cxo2", "sleep_clk", @@ -830,9 +838,11 @@ compatible = "qcom,msm8996-a2noc"; reg = <0x00583000 0x7000>; #interconnect-cells = <1>; - clock-names = "bus", "bus_a"; + clock-names = "bus", "bus_a", "aggre2_ufs_axi", "ufs_axi"; clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>, - <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>; + <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>, + <&gcc GCC_AGGRE2_UFS_AXI_CLK>, + <&gcc GCC_UFS_AXI_CLK>; }; mnoc: interconnect@5a4000 { @@ -904,7 +914,7 @@ <825000000>; }; - mdss: mdss@900000 { + mdss: display-subsystem@900000 { compatible = "qcom,mdss"; reg = <0x00900000 0x1000>, @@ -930,8 +940,8 @@ status = "disabled"; - mdp: mdp@901000 { - compatible = "qcom,mdp5"; + mdp: display-controller@901000 { + compatible = "qcom,msm8996-mdp5", "qcom,mdp5"; reg = <0x00901000 0x90000>; reg-names = "mdp_phys"; @@ -989,7 +999,8 @@ }; dsi0: dsi@994000 { - compatible = "qcom,mdss-dsi-ctrl"; + compatible = "qcom,msm8996-dsi-ctrl", + "qcom,mdss-dsi-ctrl"; reg = <0x00994000 0x400>; reg-names = "dsi_ctrl"; @@ -1050,13 +1061,14 @@ #clock-cells = <1>; #phy-cells = <0>; - clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_BB_CLK1>; + clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>; clock-names = "iface", "ref"; status = "disabled"; }; dsi1: dsi@996000 { - compatible = "qcom,mdss-dsi-ctrl"; + compatible = "qcom,msm8996-dsi-ctrl", + "qcom,mdss-dsi-ctrl"; reg = <0x00996000 0x400>; reg-names = "dsi_ctrl"; @@ -1117,7 +1129,7 @@ #clock-cells = <1>; #phy-cells = <0>; - clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_BB_CLK1>; + clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>; clock-names = "iface", "ref"; status = "disabled"; }; @@ -1246,23 +1258,23 @@ }; opp-510000000 { opp-hz = /bits/ 64 <510000000>; - opp-supported-hw = <0xFF>; + opp-supported-hw = <0xff>; }; opp-401800000 { opp-hz = /bits/ 64 <401800000>; - opp-supported-hw = <0xFF>; + opp-supported-hw = <0xff>; }; opp-315000000 { opp-hz = /bits/ 64 <315000000>; - opp-supported-hw = <0xFF>; + opp-supported-hw = <0xff>; }; opp-214000000 { opp-hz = /bits/ 64 <214000000>; - opp-supported-hw = <0xFF>; + opp-supported-hw = <0xff>; }; opp-133000000 { opp-hz = /bits/ 64 <133000000>; - opp-supported-hw = <0xFF>; + opp-supported-hw = <0xff>; }; }; @@ -1814,7 +1826,7 @@ #interrupt-cells = <4>; }; - agnoc@0 { + bus@0 { power-domains = <&gcc AGGRE0_NOC_GDSC>; compatible = "simple-pm-bus"; #address-cells = <1>; @@ -2025,6 +2037,10 @@ <0 0>, <0 0>; + interconnects = <&a2noc MASTER_UFS &bimc SLAVE_EBI_CH0>, + <&bimc MASTER_AMPSS_M0 &cnoc SLAVE_UFS_CFG>; + interconnect-names = "ufs-ddr", "cpu-ufs"; + lanes-per-direction = <1>; #reset-cells = <1>; status = "disabled"; @@ -2048,6 +2064,7 @@ reg = <0x627400 0x12c>, <0x627600 0x200>, <0x627c00 0x1b4>; + #clock-cells = <1>; #phy-cells = <0>; }; }; @@ -2458,6 +2475,10 @@ memory-region = <&mpss_mem>; }; + metadata { + memory-region = <&mdata_mem>; + }; + smd-edge { interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>; @@ -2940,8 +2961,8 @@ compatible = "qcom,msm8996-apcc"; reg = <0x06400000 0x90000>; - clock-names = "xo"; - clocks = <&rpmcc RPM_SMD_BB_CLK1>; + clock-names = "xo", "sys_apcs_aux"; + clocks = <&rpmcc RPM_SMD_XO_A_CLK_SRC>, <&apcs_glb>; #clock-cells = <1>; }; @@ -3060,7 +3081,7 @@ clock-names = "iface", "core", "xo"; clocks = <&gcc GCC_SDCC1_AHB_CLK>, <&gcc GCC_SDCC1_APPS_CLK>, - <&rpmcc RPM_SMD_BB_CLK1>; + <&rpmcc RPM_SMD_XO_CLK_SRC>; resets = <&gcc GCC_SDCC1_BCR>; pinctrl-names = "default", "sleep"; @@ -3084,7 +3105,7 @@ clock-names = "iface", "core", "xo"; clocks = <&gcc GCC_SDCC2_AHB_CLK>, <&gcc GCC_SDCC2_APPS_CLK>, - <&rpmcc RPM_SMD_BB_CLK1>; + <&rpmcc RPM_SMD_XO_CLK_SRC>; resets = <&gcc GCC_SDCC2_BCR>; pinctrl-names = "default", "sleep"; @@ -3288,7 +3309,7 @@ status = "disabled"; }; - blsp2_spi6: spi@75ba000{ + blsp2_spi6: spi@75ba000 { compatible = "qcom,spi-qup-v2.2.1"; reg = <0x075ba000 0x600>; interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; @@ -3356,7 +3377,7 @@ slim_msm: slim-ngd@91c0000 { compatible = "qcom,slim-ngd-v1.5.0"; - reg = <0x091c0000 0x2C000>; + reg = <0x091c0000 0x2c000>; interrupts = <0 163 IRQ_TYPE_LEVEL_HIGH>; dmas = <&slimbam 3>, <&slimbam 4>; dma-names = "rx", "tx"; @@ -3406,7 +3427,7 @@ interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; - clocks = <&rpmcc RPM_SMD_BB_CLK1>; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; clock-names = "xo"; memory-region = <&adsp_mem>; @@ -3426,8 +3447,7 @@ mboxes = <&apcs_glb 8>; qcom,smd-edge = <1>; qcom,remote-pid = <2>; - #address-cells = <1>; - #size-cells = <0>; + apr { power-domains = <&gcc HLOS1_VOTE_LPASS_ADSP_GDSC>; compatible = "qcom,apr-v2"; @@ -3485,6 +3505,7 @@ reg = <0x09820000 0x1000>; #mbox-cells = <1>; + #clock-cells = <0>; }; timer@9840000 { @@ -3551,6 +3572,13 @@ reg = <0x09a10000 0x1000>; }; + cbf: clock-controller@9a11000 { + compatible = "qcom,msm8996-cbf"; + reg = <0x09a11000 0x10000>; + clocks = <&rpmcc RPM_SMD_XO_A_CLK_SRC>, <&apcs_glb>; + #clock-cells = <0>; + }; + intc: interrupt-controller@9bc0000 { compatible = "qcom,msm8996-gic-v3", "arm,gic-v3"; #interrupt-cells = <3>; @@ -3580,7 +3608,7 @@ type = "passive"; }; - cpu0_crit: cpu_crit { + cpu0_crit: cpu-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -3601,7 +3629,7 @@ type = "passive"; }; - cpu1_crit: cpu_crit { + cpu1_crit: cpu-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -3622,7 +3650,7 @@ type = "passive"; }; - cpu2_crit: cpu_crit { + cpu2_crit: cpu-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -3643,7 +3671,7 @@ type = "passive"; }; - cpu3_crit: cpu_crit { + cpu3_crit: cpu-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; diff --git a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts index 310f7a2df1e8..5aad9f05780a 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts @@ -113,7 +113,7 @@ <&cam_snapshot_pin_a>; button-vol-up { label = "Volume Up"; - gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; + gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>; linux,input-type = <EV_KEY>; linux,code = <KEY_VOLUMEUP>; gpio-key,wakeup; @@ -122,7 +122,7 @@ button-camera-snapshot { label = "Camera Snapshot"; - gpios = <&pm8998_gpio 7 GPIO_ACTIVE_LOW>; + gpios = <&pm8998_gpios 7 GPIO_ACTIVE_LOW>; linux,input-type = <EV_KEY>; linux,code = <KEY_CAMERA>; debounce-interval = <15>; @@ -130,7 +130,7 @@ button-camera-focus { label = "Camera Focus"; - gpios = <&pm8998_gpio 8 GPIO_ACTIVE_LOW>; + gpios = <&pm8998_gpios 8 GPIO_ACTIVE_LOW>; linux,input-type = <EV_KEY>; linux,code = <KEY_CAMERA_FOCUS>; debounce-interval = <15>; @@ -249,7 +249,7 @@ reg = <0x14>; interrupt-parent = <&tlmm>; interrupts = <125 IRQ_TYPE_LEVEL_LOW>; - reset-gpios = <&tlmm 89 GPIO_ACTIVE_HIGH>; + reset-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>; AVDD28-supply = <&vreg_l28_3p0>; VDDIO-supply = <&ts_vio_vreg>; pinctrl-names = "active"; @@ -338,7 +338,7 @@ }; }; -&pm8998_gpio { +&pm8998_gpios { vol_up_pin_a: vol-up-active-state { pins = "gpio6"; function = "normal"; @@ -364,14 +364,9 @@ }; }; -&pm8998_pon { - resin { - compatible = "qcom,pm8941-resin"; - interrupts = <GIC_SPI 0x8 1 IRQ_TYPE_EDGE_BOTH>; - bias-pull-up; - debounce = <15625>; - linux,code = <KEY_VOLUMEDOWN>; - }; +&pm8998_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; }; &qusb2phy { diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts b/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts index 9fb1fb9b8529..d36b36af49d0 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts @@ -23,7 +23,7 @@ pinctrl-0 = <&button_backlight_default>; led-keypad-backlight { - gpios = <&pmi8998_gpio 5 GPIO_ACTIVE_HIGH>; + gpios = <&pmi8998_gpios 5 GPIO_ACTIVE_HIGH>; color = <LED_COLOR_ID_WHITE>; function = LED_FUNCTION_KBD_BACKLIGHT; default-state = "off"; @@ -31,7 +31,7 @@ }; }; -&pmi8998_gpio { +&pmi8998_gpios { button_backlight_default: button-backlight-state { pins = "gpio5"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi index 7d4a67d07501..ce03c7c239e5 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi @@ -92,7 +92,7 @@ button-vol-down { label = "Volume down"; - gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>; + gpios = <&pm8998_gpios 5 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; debounce-interval = <15>; wakeup-source; @@ -100,7 +100,7 @@ button-vol-up { label = "Volume up"; - gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; + gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; debounce-interval = <15>; wakeup-source; @@ -269,7 +269,7 @@ }; }; -&pm8998_gpio { +&pm8998_gpios { vol_keys_default: vol-keys-state { pins = "gpio5", "gpio6"; function = "normal"; diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts index 20fe0394a3c1..1868ad649415 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts @@ -20,7 +20,7 @@ regulator-max-microvolt = <1350000>; startup-delay-us = <0>; enable-active-high; - gpio = <&pmi8998_gpio 10 GPIO_ACTIVE_HIGH>; + gpio = <&pmi8998_gpios 10 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&disp_dvdd_en>; }; @@ -37,7 +37,7 @@ qcom,soft-start-us = <200>; }; -&pmi8998_gpio { +&pmi8998_gpios { disp_dvdd_en: disp-dvdd-en-active-state { pins = "gpio10"; function = "normal"; diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi index 5da87baa2b23..820414758888 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi @@ -25,7 +25,7 @@ pinctrl-names = "default"; clocks = <&rpmcc RPM_SMD_DIV_CLK1>; #clock-cells = <0>; - enable-gpios = <&pm8998_gpio 13 GPIO_ACTIVE_HIGH>; + enable-gpios = <&pm8998_gpios 13 GPIO_ACTIVE_HIGH>; }; }; @@ -65,7 +65,7 @@ regulator-name = "cam_vio_vreg"; startup-delay-us = <0>; enable-active-high; - gpio = <&pmi8998_gpio 1 GPIO_ACTIVE_HIGH>; + gpio = <&pmi8998_gpios 1 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&cam_vio_default>; vin-supply = <&vreg_lvs1a_1p8>; @@ -103,7 +103,7 @@ <&cam_snapshot_pin_a>; button-vol-down { label = "Volume Down"; - gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>; + gpios = <&pm8998_gpios 5 GPIO_ACTIVE_LOW>; linux,input-type = <EV_KEY>; linux,code = <KEY_VOLUMEDOWN>; gpio-key,wakeup; @@ -112,7 +112,7 @@ button-camera-snapshot { label = "Camera Snapshot"; - gpios = <&pm8998_gpio 7 GPIO_ACTIVE_LOW>; + gpios = <&pm8998_gpios 7 GPIO_ACTIVE_LOW>; linux,input-type = <EV_KEY>; linux,code = <KEY_CAMERA>; debounce-interval = <15>; @@ -120,7 +120,7 @@ button-camera-focus { label = "Camera Focus"; - gpios = <&pm8998_gpio 8 GPIO_ACTIVE_LOW>; + gpios = <&pm8998_gpios 8 GPIO_ACTIVE_LOW>; linux,input-type = <EV_KEY>; linux,code = <KEY_CAMERA_FOCUS>; debounce-interval = <15>; @@ -187,7 +187,7 @@ vibrator { compatible = "gpio-vibrator"; - enable-gpios = <&pmi8998_gpio 5 GPIO_ACTIVE_HIGH>; + enable-gpios = <&pmi8998_gpios 5 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&vib_default>; }; @@ -303,7 +303,7 @@ }; }; -&pm8998_gpio { +&pm8998_gpios { vol_down_pin_a: vol-down-active-state { pins = "gpio5"; function = PMIC_GPIO_FUNC_NORMAL; @@ -335,7 +335,7 @@ }; }; -&pmi8998_gpio { +&pmi8998_gpios { cam_vio_default: cam-vio-active-state { pins = "gpio1"; function = PMIC_GPIO_FUNC_NORMAL; @@ -357,14 +357,9 @@ }; }; -&pm8998_pon { - resin { - compatible = "qcom,pm8941-resin"; - interrupts = <GIC_SPI 0x8 1 IRQ_TYPE_EDGE_BOTH>; - debounce = <15625>; - bias-pull-up; - linux,code = <KEY_VOLUMEUP>; - }; +&pm8998_resin { + linux,code = <KEY_VOLUMEUP>; + status = "okay"; }; &qusb2phy { diff --git a/arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts b/arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts index b1aac7311ef9..7956b151c7a4 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts @@ -133,7 +133,7 @@ key-vol-up { label = "Volume up"; - gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; + gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; debounce-interval = <15>; wakeup-source; @@ -278,7 +278,7 @@ }; }; -&pm8998_gpio { +&pm8998_gpios { vol_up_key_default: vol-up-key-default-state { pins = "gpio6"; function = "normal"; diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index 539382dab0ad..8bc1c59127e5 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -108,6 +108,12 @@ reg = <0x0 0x95700000 0x0 0x100000>; no-map; }; + + mdata_mem: mpss-metadata { + alloc-ranges = <0x0 0xa0000000 0x0 0x20000000>; + size = <0x0 0x4000>; + no-map; + }; }; clocks { @@ -465,7 +471,7 @@ type = "passive"; }; - cpu0_crit: cpu_crit { + cpu0_crit: cpu-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -486,7 +492,7 @@ type = "passive"; }; - cpu1_crit: cpu_crit { + cpu1_crit: cpu-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -507,7 +513,7 @@ type = "passive"; }; - cpu2_crit: cpu_crit { + cpu2_crit: cpu-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -528,7 +534,7 @@ type = "passive"; }; - cpu3_crit: cpu_crit { + cpu3_crit: cpu-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -549,7 +555,7 @@ type = "passive"; }; - cpu4_crit: cpu_crit { + cpu4_crit: cpu-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -570,7 +576,7 @@ type = "passive"; }; - cpu5_crit: cpu_crit { + cpu5_crit: cpu-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -591,7 +597,7 @@ type = "passive"; }; - cpu6_crit: cpu_crit { + cpu6_crit: cpu-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -612,7 +618,7 @@ type = "passive"; }; - cpu7_crit: cpu_crit { + cpu7_crit: cpu-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -808,7 +814,7 @@ reg = <0x00100000 0xb0000>; clock-names = "xo", "sleep_clk"; - clocks = <&xo>, <&sleep_clk>; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>; /* * The hypervisor typically configures the memory region where these clocks @@ -1357,6 +1363,10 @@ memory-region = <&mpss_mem>; }; + metadata { + memory-region = <&mdata_mem>; + }; + glink-edge { interrupts = <GIC_SPI 452 IRQ_TYPE_EDGE_RISING>; label = "modem"; @@ -1394,43 +1404,43 @@ opp-710000097 { opp-hz = /bits/ 64 <710000097>; opp-level = <RPM_SMD_LEVEL_TURBO>; - opp-supported-hw = <0xFF>; + opp-supported-hw = <0xff>; }; opp-670000048 { opp-hz = /bits/ 64 <670000048>; opp-level = <RPM_SMD_LEVEL_NOM_PLUS>; - opp-supported-hw = <0xFF>; + opp-supported-hw = <0xff>; }; opp-596000097 { opp-hz = /bits/ 64 <596000097>; opp-level = <RPM_SMD_LEVEL_NOM>; - opp-supported-hw = <0xFF>; + opp-supported-hw = <0xff>; }; opp-515000097 { opp-hz = /bits/ 64 <515000097>; opp-level = <RPM_SMD_LEVEL_SVS_PLUS>; - opp-supported-hw = <0xFF>; + opp-supported-hw = <0xff>; }; opp-414000000 { opp-hz = /bits/ 64 <414000000>; opp-level = <RPM_SMD_LEVEL_SVS>; - opp-supported-hw = <0xFF>; + opp-supported-hw = <0xff>; }; opp-342000000 { opp-hz = /bits/ 64 <342000000>; opp-level = <RPM_SMD_LEVEL_LOW_SVS>; - opp-supported-hw = <0xFF>; + opp-supported-hw = <0xff>; }; opp-257000000 { opp-hz = /bits/ 64 <257000000>; opp-level = <RPM_SMD_LEVEL_MIN_SVS>; - opp-supported-hw = <0xFF>; + opp-supported-hw = <0xff>; }; }; }; @@ -2088,7 +2098,7 @@ clock-names = "iface", "core", "xo"; clocks = <&gcc GCC_SDCC2_AHB_CLK>, <&gcc GCC_SDCC2_APPS_CLK>, - <&xo>; + <&rpmcc RPM_SMD_XO_CLK_SRC>; bus-width = <4>; status = "disabled"; }; @@ -2398,8 +2408,7 @@ "dsi1byte", "hdmipll", "dplink", - "dpvco", - "core_bi_pll_test_se"; + "dpvco"; clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GCC_MMSS_GPLL0_CLK>, <0>, @@ -2408,7 +2417,6 @@ <0>, <0>, <0>, - <0>, <0>; }; diff --git a/arch/arm64/boot/dts/qcom/pm6125.dtsi b/arch/arm64/boot/dts/qcom/pm6125.dtsi index 1c8ccda26ffb..59092a551a16 100644 --- a/arch/arm64/boot/dts/qcom/pm6125.dtsi +++ b/arch/arm64/boot/dts/qcom/pm6125.dtsi @@ -136,11 +136,11 @@ status = "disabled"; }; - pm6125_gpio: gpio@c000 { + pm6125_gpios: gpio@c000 { compatible = "qcom,pm6125-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; - gpio-ranges = <&pm6125_gpio 0 0 9>; + gpio-ranges = <&pm6125_gpios 0 0 9>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm64/boot/dts/qcom/pm6150.dtsi b/arch/arm64/boot/dts/qcom/pm6150.dtsi index 3d91fb405ca2..2e6afa296141 100644 --- a/arch/arm64/boot/dts/qcom/pm6150.dtsi +++ b/arch/arm64/boot/dts/qcom/pm6150.dtsi @@ -88,11 +88,11 @@ status = "disabled"; }; - pm6150_gpio: gpio@c000 { + pm6150_gpios: gpio@c000 { compatible = "qcom,pm6150-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; - gpio-ranges = <&pm6150_gpio 0 0 10>; + gpio-ranges = <&pm6150_gpios 0 0 10>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm64/boot/dts/qcom/pm6150l.dtsi b/arch/arm64/boot/dts/qcom/pm6150l.dtsi index 90aac61ad264..6f7aa67501e2 100644 --- a/arch/arm64/boot/dts/qcom/pm6150l.dtsi +++ b/arch/arm64/boot/dts/qcom/pm6150l.dtsi @@ -95,11 +95,11 @@ status = "disabled"; }; - pm6150l_gpio: gpio@c000 { + pm6150l_gpios: gpio@c000 { compatible = "qcom,pm6150l-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; - gpio-ranges = <&pm6150l_gpio 0 0 12>; + gpio-ranges = <&pm6150l_gpios 0 0 12>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; @@ -112,6 +112,12 @@ #address-cells = <1>; #size-cells = <0>; + pm6150l_flash: led-controller@d300 { + compatible = "qcom,pm6150l-flash-led", "qcom,spmi-flash-led"; + reg = <0xd300>; + status = "disabled"; + }; + pm6150l_wled: leds@d800 { compatible = "qcom,pm6150l-wled"; reg = <0xd800>, <0xd900>; diff --git a/arch/arm64/boot/dts/qcom/pm7250b.dtsi b/arch/arm64/boot/dts/qcom/pm7250b.dtsi index 61f7a6345150..d709d955a2f5 100644 --- a/arch/arm64/boot/dts/qcom/pm7250b.dtsi +++ b/arch/arm64/boot/dts/qcom/pm7250b.dtsi @@ -110,6 +110,14 @@ label = "chg_mid"; }; + adc-chan@4b { + reg = <ADC5_BAT_ID_100K_PU>; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + qcom,ratiometric; + label = "bat_id"; + }; + adc-chan@83 { reg = <ADC5_VPH_PWR>; qcom,pre-scaling = <1 3>; diff --git a/arch/arm64/boot/dts/qcom/pm8005.dtsi b/arch/arm64/boot/dts/qcom/pm8005.dtsi index 8d4b081b4e9d..0f0ab2da8305 100644 --- a/arch/arm64/boot/dts/qcom/pm8005.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8005.dtsi @@ -11,11 +11,11 @@ #address-cells = <1>; #size-cells = <0>; - pm8005_gpio: gpio@c000 { + pm8005_gpios: gpio@c000 { compatible = "qcom,pm8005-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; - gpio-ranges = <&pm8005_gpio 0 0 4>; + gpio-ranges = <&pm8005_gpios 0 0 4>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm64/boot/dts/qcom/pm8010.dtsi b/arch/arm64/boot/dts/qcom/pm8010.dtsi new file mode 100644 index 000000000000..0ea641e12209 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm8010.dtsi @@ -0,0 +1,84 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Linaro Limited + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +/ { + thermal-zones { + pm8010-m-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&pm8010_m_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + }; + }; + + pm8010-n-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&pm8010_n_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + }; + }; + }; +}; + + +&spmi_bus { + pm8010_m: pmic@c { + compatible = "qcom,pm8010", "qcom,spmi-pmic"; + reg = <0xc SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8010_m_temp_alarm: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0xc 0x24 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + }; + + pm8010_n: pmic@d { + compatible = "qcom,pm8010", "qcom,spmi-pmic"; + reg = <0xd SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8010_n_temp_alarm: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0xd 0x24 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pm8150.dtsi b/arch/arm64/boot/dts/qcom/pm8150.dtsi index 574fa95a2871..db90c55fa2cf 100644 --- a/arch/arm64/boot/dts/qcom/pm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8150.dtsi @@ -121,7 +121,7 @@ rtc@6000 { compatible = "qcom,pm8941-rtc"; - reg = <0x6000>; + reg = <0x6000>, <0x6100>; reg-names = "rtc", "alarm"; interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>; }; diff --git a/arch/arm64/boot/dts/qcom/pm8550.dtsi b/arch/arm64/boot/dts/qcom/pm8550.dtsi new file mode 100644 index 000000000000..46396ec1a330 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm8550.dtsi @@ -0,0 +1,59 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Linaro Limited + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +/ { + thermal-zones { + pm8550-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&pm8550_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + }; + }; + }; +}; + + +&spmi_bus { + pm8550: pmic@1 { + compatible = "qcom,pm8550", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8550_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pm8550_gpios: gpio@8800 { + compatible = "qcom,pm8550-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pm8550_gpios 0 0 12>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pm8550b.dtsi b/arch/arm64/boot/dts/qcom/pm8550b.dtsi new file mode 100644 index 000000000000..16bcfb64d735 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm8550b.dtsi @@ -0,0 +1,59 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Linaro Limited + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +/ { + thermal-zones { + pm8550b-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&pm8550b_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + }; + }; + }; +}; + + +&spmi_bus { + pm8550b: pmic@7 { + compatible = "qcom,pm8550", "qcom,spmi-pmic"; + reg = <0x7 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8550b_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x7 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pm8550b_gpios: gpio@8800 { + compatible = "qcom,pm8550b-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pm8550b_gpios 0 0 12>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pm8550ve.dtsi b/arch/arm64/boot/dts/qcom/pm8550ve.dtsi new file mode 100644 index 000000000000..c47646a467be --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm8550ve.dtsi @@ -0,0 +1,59 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Linaro Limited + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +/ { + thermal-zones { + pm8550ve-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&pm8550ve_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + }; + }; + }; +}; + + +&spmi_bus { + pm8550ve: pmic@5 { + compatible = "qcom,pm8550", "qcom,spmi-pmic"; + reg = <0x5 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8550ve_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x5 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pm8550ve_gpios: gpio@8800 { + compatible = "qcom,pm8550ve-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pm8550ve_gpios 0 0 8>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pm8550vs.dtsi b/arch/arm64/boot/dts/qcom/pm8550vs.dtsi new file mode 100644 index 000000000000..97b1c18aa7d8 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm8550vs.dtsi @@ -0,0 +1,194 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Linaro Limited + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +/ { + thermal-zones { + pm8550vs-c-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&pm8550vs_c_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + }; + }; + + pm8550vs-d-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&pm8550vs_d_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + }; + }; + + pm8550vs-e-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&pm8550vs_e_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + }; + }; + + pm8550vs-g-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&pm8550vs_g_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + }; + }; + }; +}; + + +&spmi_bus { + pm8550vs_c: pmic@2 { + compatible = "qcom,pm8550", "qcom,spmi-pmic"; + reg = <0x2 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8550vs_c_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pm8550vs_c_gpios: gpio@8800 { + compatible = "qcom,pm8550vs-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pm8550vs_c_gpios 0 0 6>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pm8550vs_d: pmic@3 { + compatible = "qcom,pm8550", "qcom,spmi-pmic"; + reg = <0x3 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8550vs_d_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x3 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pm8550vs_d_gpios: gpio@8800 { + compatible = "qcom,pm8550vs-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pm8550vs_d_gpios 0 0 6>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pm8550vs_e: pmic@4 { + compatible = "qcom,pm8550", "qcom,spmi-pmic"; + reg = <0x4 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8550vs_e_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x4 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pm8550vs_e_gpios: gpio@8800 { + compatible = "qcom,pm8550vs-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pm8550vs_e_gpios 0 0 6>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pm8550vs_g: pmic@6 { + compatible = "qcom,pm8550", "qcom,spmi-pmic"; + reg = <0x6 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8550vs_g_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x6 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pm8550vs_g_gpios: gpio@8800 { + compatible = "qcom,pm8550vs-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pm8550vs_g_gpios 0 0 6>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi index 08f9ca006e72..e2a6b66d8847 100644 --- a/arch/arm64/boot/dts/qcom/pm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi @@ -93,7 +93,8 @@ rtc@6000 { compatible = "qcom,pm8941-rtc"; - reg = <0x6000>; + reg = <0x6000>, <0x6100>; + reg-names = "rtc", "alarm"; interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; }; diff --git a/arch/arm64/boot/dts/qcom/pm8950.dtsi b/arch/arm64/boot/dts/qcom/pm8950.dtsi index 07c3896bd36f..5ec38b7e335a 100644 --- a/arch/arm64/boot/dts/qcom/pm8950.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8950.dtsi @@ -126,7 +126,7 @@ rtc@6000 { compatible = "qcom,pm8941-rtc"; - reg = <0x6000>; + reg = <0x6000>, <0x6100>; reg-names = "rtc", "alarm"; interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>; }; @@ -141,11 +141,11 @@ #interrupt-cells = <2>; }; - pm8950_gpio: gpio@c000 { + pm8950_gpios: gpio@c000 { compatible = "qcom,pm8950-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; - gpio-ranges = <&pm8950_gpio 0 0 8>; + gpio-ranges = <&pm8950_gpios 0 0 8>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm64/boot/dts/qcom/pm8998.dtsi b/arch/arm64/boot/dts/qcom/pm8998.dtsi index 6a5854333b2b..adbba9f4089a 100644 --- a/arch/arm64/boot/dts/qcom/pm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8998.dtsi @@ -109,11 +109,11 @@ interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; }; - pm8998_gpio: gpio@c000 { + pm8998_gpios: gpio@c000 { compatible = "qcom,pm8998-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; - gpio-ranges = <&pm8998_gpio 0 0 26>; + gpio-ranges = <&pm8998_gpios 0 0 26>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm64/boot/dts/qcom/pmi8950.dtsi b/arch/arm64/boot/dts/qcom/pmi8950.dtsi index 32d27e2187e3..4891be3cd68a 100644 --- a/arch/arm64/boot/dts/qcom/pmi8950.dtsi +++ b/arch/arm64/boot/dts/qcom/pmi8950.dtsi @@ -47,7 +47,7 @@ adc-chan@a { reg = <VADC_REF_1250MV>; qcom,pre-scaling = <1 1>; - label = "ref_1250v"; + label = "ref_1250mv"; }; adc-chan@d { @@ -67,11 +67,11 @@ #interrupt-cells = <2>; }; - pmi8950_gpio: gpio@c000 { + pmi8950_gpios: gpio@c000 { compatible = "qcom,pmi8950-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; - gpio-ranges = <&pmi8950_gpio 0 0 2>; + gpio-ranges = <&pmi8950_gpios 0 0 2>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm64/boot/dts/qcom/pmi8998.dtsi b/arch/arm64/boot/dts/qcom/pmi8998.dtsi index cd1caeae8281..ffe587f281d8 100644 --- a/arch/arm64/boot/dts/qcom/pmi8998.dtsi +++ b/arch/arm64/boot/dts/qcom/pmi8998.dtsi @@ -9,11 +9,11 @@ #address-cells = <1>; #size-cells = <0>; - pmi8998_gpio: gpio@c000 { + pmi8998_gpios: gpio@c000 { compatible = "qcom,pmi8998-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; - gpio-ranges = <&pmi8998_gpio 0 0 14>; + gpio-ranges = <&pmi8998_gpios 0 0 14>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm64/boot/dts/qcom/pmk8350.dtsi b/arch/arm64/boot/dts/qcom/pmk8350.dtsi index 32f5e6af8c11..f26fb7d32faf 100644 --- a/arch/arm64/boot/dts/qcom/pmk8350.dtsi +++ b/arch/arm64/boot/dts/qcom/pmk8350.dtsi @@ -21,7 +21,7 @@ #size-cells = <0>; pmk8350_pon: pon@1300 { - compatible = "qcom,pm8998-pon"; + compatible = "qcom,pmk8350-pon"; reg = <0x1300>, <0x800>; reg-names = "hlos", "pbs"; diff --git a/arch/arm64/boot/dts/qcom/pmk8550.dtsi b/arch/arm64/boot/dts/qcom/pmk8550.dtsi new file mode 100644 index 000000000000..201efeda7d2d --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pmk8550.dtsi @@ -0,0 +1,55 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Linaro Limited + */ + +#include <dt-bindings/input/input.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +&spmi_bus { + pmk8550: pmic@0 { + compatible = "qcom,pm8550", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmk8550_pon: pon@1300 { + compatible = "qcom,pmk8350-pon"; + reg = <0x1300>, <0x800>; + reg-names = "hlos", "pbs"; + + pon_pwrkey: pwrkey { + compatible = "qcom,pmk8350-pwrkey"; + interrupts = <0x0 0x13 0x7 IRQ_TYPE_EDGE_BOTH>; + linux,code = <KEY_POWER>; + status = "disabled"; + }; + + pon_resin: resin { + compatible = "qcom,pmk8350-resin"; + interrupts = <0x0 0x13 0x6 IRQ_TYPE_EDGE_BOTH>; + status = "disabled"; + }; + }; + + pmk8550_rtc: rtc@6100 { + compatible = "qcom,pmk8350-rtc"; + reg = <0x6100>, <0x6200>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; + + pmk8550_gpios: gpio@8800 { + compatible = "qcom,pmk8550-gpio", "qcom,spmi-gpio"; + reg = <0xb800>; + gpio-controller; + gpio-ranges = <&pmk8550_gpios 0 0 6>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi b/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi index 20c5d60c8c2c..ee1e428d3a6e 100644 --- a/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi +++ b/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi @@ -108,7 +108,7 @@ pmm8155au_1_rtc: rtc@6000 { compatible = "qcom,pm8941-rtc"; - reg = <0x6000>; + reg = <0x6000>, <0x6100>; reg-names = "rtc", "alarm"; interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>; diff --git a/arch/arm64/boot/dts/qcom/pmp8074.dtsi b/arch/arm64/boot/dts/qcom/pmp8074.dtsi index ceb2e6358b3d..580684411d74 100644 --- a/arch/arm64/boot/dts/qcom/pmp8074.dtsi +++ b/arch/arm64/boot/dts/qcom/pmp8074.dtsi @@ -74,7 +74,7 @@ pmp8074_rtc: rtc@6000 { compatible = "qcom,pm8941-rtc"; - reg = <0x6000>; + reg = <0x6000>, <0x6100>; reg-names = "rtc", "alarm"; interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>; allow-set-time; diff --git a/arch/arm64/boot/dts/qcom/pmr735d.dtsi b/arch/arm64/boot/dts/qcom/pmr735d.dtsi new file mode 100644 index 000000000000..41fb664a10b3 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pmr735d.dtsi @@ -0,0 +1,104 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Linaro Limited + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +/ { + thermal-zones { + pmr735d-k-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&pmr735d_k_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + }; + }; + + pmr735d-l-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&pmr735d_l_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + }; + }; + }; +}; + + +&spmi_bus { + pmr735d_k: pmic@a { + compatible = "qcom,pmr735d", "qcom,spmi-pmic"; + reg = <0xa SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmr735d_k_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0xa 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmr735d_k_gpios: gpio@8800 { + compatible = "qcom,pmr735d-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmr735d_k_gpios 0 0 2>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmr735d_l: pmic@b { + compatible = "qcom,pmr735d", "qcom,spmi-pmic"; + reg = <0xb SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmr735d_l_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0xb 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmr735d_l_gpios: gpio@8800 { + compatible = "qcom,pmr735d-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmr735d_l_gpios 0 0 2>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pms405.dtsi b/arch/arm64/boot/dts/qcom/pms405.dtsi index ffe9e33808d0..22edb47c6a84 100644 --- a/arch/arm64/boot/dts/qcom/pms405.dtsi +++ b/arch/arm64/boot/dts/qcom/pms405.dtsi @@ -125,7 +125,7 @@ rtc@6000 { compatible = "qcom,pm8941-rtc"; - reg = <0x6000>; + reg = <0x6000>, <0x6100>; reg-names = "rtc", "alarm"; interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>; }; diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi index a5324eecb50a..bc2ed73afb74 100644 --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi @@ -223,13 +223,15 @@ qcom,rpm-msg-ram = <&rpm_msg_ram>; mboxes = <&apcs_glb 0>; - rpm_requests: glink-channel { + rpm_requests: rpm-requests { compatible = "qcom,rpm-qcs404"; qcom,glink-channels = "rpm_requests"; rpmcc: clock-controller { compatible = "qcom,rpmcc-qcs404", "qcom,rpmcc"; #clock-cells = <1>; + clocks = <&xo_board>; + clock-names = "xo"; }; rpmpd: power-controller { @@ -366,13 +368,126 @@ reg = <0x000a4000 0x1000>; #address-cells = <1>; #size-cells = <1>; - tsens_caldata: caldata@d0 { - reg = <0x1f8 0x14>; - }; cpr_efuse_speedbin: speedbin@13c { reg = <0x13c 0x4>; bits = <2 3>; }; + + tsens_s0_p1: s0-p1@1f8 { + reg = <0x1f8 0x1>; + bits = <0 6>; + }; + + tsens_s0_p2: s0-p2@1f8 { + reg = <0x1f8 0x2>; + bits = <6 6>; + }; + + tsens_s1_p1: s1-p1@1f9 { + reg = <0x1f9 0x2>; + bits = <4 6>; + }; + + tsens_s1_p2: s1-p2@1fa { + reg = <0x1fa 0x1>; + bits = <2 6>; + }; + + tsens_s2_p1: s2-p1@1fb { + reg = <0x1fb 0x1>; + bits = <0 6>; + }; + + tsens_s2_p2: s2-p2@1fb { + reg = <0x1fb 0x2>; + bits = <6 6>; + }; + + tsens_s3_p1: s3-p1@1fc { + reg = <0x1fc 0x2>; + bits = <4 6>; + }; + + tsens_s3_p2: s3-p2@1fd { + reg = <0x1fd 0x1>; + bits = <2 6>; + }; + + tsens_s4_p1: s4-p1@1fe { + reg = <0x1fe 0x1>; + bits = <0 6>; + }; + + tsens_s4_p2: s4-p2@1fe { + reg = <0x1fe 0x2>; + bits = <6 6>; + }; + + tsens_s5_p1: s5-p1@200 { + reg = <0x200 0x1>; + bits = <0 6>; + }; + + tsens_s5_p2: s5-p2@200 { + reg = <0x200 0x2>; + bits = <6 6>; + }; + + tsens_s6_p1: s6-p1@201 { + reg = <0x201 0x2>; + bits = <4 6>; + }; + + tsens_s6_p2: s6-p2@202 { + reg = <0x202 0x1>; + bits = <2 6>; + }; + + tsens_s7_p1: s7-p1@203 { + reg = <0x203 0x1>; + bits = <0 6>; + }; + + tsens_s7_p2: s7-p2@203 { + reg = <0x203 0x2>; + bits = <6 6>; + }; + + tsens_s8_p1: s8-p1@204 { + reg = <0x204 0x2>; + bits = <4 6>; + }; + + tsens_s8_p2: s8-p2@205 { + reg = <0x205 0x1>; + bits = <2 6>; + }; + + tsens_s9_p1: s9-p1@206 { + reg = <0x206 0x1>; + bits = <0 6>; + }; + + tsens_s9_p2: s9-p2@206 { + reg = <0x206 0x2>; + bits = <6 6>; + }; + + tsens_mode: mode@208 { + reg = <0x208 1>; + bits = <0 3>; + }; + + tsens_base1: base1@208 { + reg = <0x208 2>; + bits = <3 8>; + }; + + tsens_base2: base2@208 { + reg = <0x209 2>; + bits = <3 8>; + }; + cpr_efuse_quot_offset1: qoffset1@231 { reg = <0x231 0x4>; bits = <4 7>; @@ -447,8 +562,30 @@ compatible = "qcom,qcs404-tsens", "qcom,tsens-v1"; reg = <0x004a9000 0x1000>, /* TM */ <0x004a8000 0x1000>; /* SROT */ - nvmem-cells = <&tsens_caldata>; - nvmem-cell-names = "calib"; + nvmem-cells = <&tsens_mode>, + <&tsens_base1>, <&tsens_base2>, + <&tsens_s0_p1>, <&tsens_s0_p2>, + <&tsens_s1_p1>, <&tsens_s1_p2>, + <&tsens_s2_p1>, <&tsens_s2_p2>, + <&tsens_s3_p1>, <&tsens_s3_p2>, + <&tsens_s4_p1>, <&tsens_s4_p2>, + <&tsens_s5_p1>, <&tsens_s5_p2>, + <&tsens_s6_p1>, <&tsens_s6_p2>, + <&tsens_s7_p1>, <&tsens_s7_p2>, + <&tsens_s8_p1>, <&tsens_s8_p2>, + <&tsens_s9_p1>, <&tsens_s9_p2>; + nvmem-cell-names = "mode", + "base1", "base2", + "s0_p1", "s0_p2", + "s1_p1", "s1_p2", + "s2_p1", "s2_p2", + "s3_p1", "s3_p2", + "s4_p1", "s4_p2", + "s5_p1", "s5_p2", + "s6_p1", "s6_p2", + "s7_p1", "s7_p2", + "s8_p1", "s8_p2", + "s9_p1", "s9_p2"; #qcom,sensors = <10>; interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "uplow"; @@ -485,27 +622,31 @@ interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; - clocks = <&xo_board>, - <&gcc GCC_CDSP_CFG_AHB_CLK>, - <&gcc GCC_CDSP_TBU_CLK>, - <&gcc GCC_BIMC_CDSP_CLK>, - <&turingcc TURING_WRAPPER_AON_CLK>, - <&turingcc TURING_Q6SS_AHBS_AON_CLK>, - <&turingcc TURING_Q6SS_AHBM_AON_CLK>, - <&turingcc TURING_Q6SS_Q6_AXIM_CLK>; - clock-names = "xo", - "sway", - "tbu", - "bimc", - "ahb_aon", - "q6ss_slave", - "q6ss_master", - "q6_axim"; - - resets = <&gcc GCC_CDSP_RESTART>; - reset-names = "restart"; - - qcom,halt-regs = <&tcsr 0x19004>; + clocks = <&xo_board>; + clock-names = "xo"; + + /* + * If the node was using the PIL binding, then include properties: + * clocks = <&xo_board>, + * <&gcc GCC_CDSP_CFG_AHB_CLK>, + * <&gcc GCC_CDSP_TBU_CLK>, + * <&gcc GCC_BIMC_CDSP_CLK>, + * <&turingcc TURING_WRAPPER_AON_CLK>, + * <&turingcc TURING_Q6SS_AHBS_AON_CLK>, + * <&turingcc TURING_Q6SS_AHBM_AON_CLK>, + * <&turingcc TURING_Q6SS_Q6_AXIM_CLK>; + * clock-names = "xo", + * "sway", + * "tbu", + * "bimc", + * "ahb_aon", + * "q6ss_slave", + * "q6ss_master", + * "q6_axim"; + * resets = <&gcc GCC_CDSP_RESTART>; + * reset-names = "restart"; + * qcom,halt-regs = <&tcsr 0x19004>; + */ memory-region = <&cdsp_fw_mem>; @@ -729,6 +870,14 @@ reg = <0x01800000 0x80000>; #clock-cells = <1>; #reset-cells = <1>; + #power-domain-cells = <1>; + + clocks = <&xo_board>, + <&sleep_clk>, + <&pcie_phy>, + <0>, + <0>, + <0>; assigned-clocks = <&gcc GCC_APSS_AHB_CLK_SRC>; assigned-clock-rates = <19200000>; @@ -806,10 +955,11 @@ clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; resets = <&gcc GCC_PCIEPHY_0_PHY_BCR>, - <&gcc 21>; + <&gcc GCC_PCIE_0_PIPE_ARES>; reset-names = "phy", "pipe"; clock-output-names = "pcie_0_pipe_clk"; + #clock-cells = <0>; #phy-cells = <0>; status = "disabled"; @@ -1336,12 +1486,12 @@ <&gcc GCC_PCIE_0_SLV_AXI_CLK>; clock-names = "iface", "aux", "master_bus", "slave_bus"; - resets = <&gcc 18>, - <&gcc 17>, - <&gcc 15>, - <&gcc 19>, + resets = <&gcc GCC_PCIE_0_AXI_MASTER_ARES>, + <&gcc GCC_PCIE_0_AXI_SLAVE_ARES>, + <&gcc GCC_PCIE_0_AXI_MASTER_STICKY_ARES>, + <&gcc GCC_PCIE_0_CORE_STICKY_ARES>, <&gcc GCC_PCIE_0_BCR>, - <&gcc 16>; + <&gcc GCC_PCIE_0_AHB_ARES>; reset-names = "axi_m", "axi_s", "axi_m_sticky", @@ -1502,7 +1652,7 @@ hysteresis = <2000>; type = "passive"; }; - cluster_crit: cluster_crit { + cluster_crit: cluster-crit { temperature = <120000>; hysteresis = <2000>; type = "critical"; @@ -1536,7 +1686,7 @@ hysteresis = <2000>; type = "passive"; }; - cpu0_crit: cpu_crit { + cpu0_crit: cpu-crit { temperature = <120000>; hysteresis = <2000>; type = "critical"; @@ -1570,7 +1720,7 @@ hysteresis = <2000>; type = "passive"; }; - cpu1_crit: cpu_crit { + cpu1_crit: cpu-crit { temperature = <120000>; hysteresis = <2000>; type = "critical"; @@ -1604,7 +1754,7 @@ hysteresis = <2000>; type = "passive"; }; - cpu2_crit: cpu_crit { + cpu2_crit: cpu-crit { temperature = <120000>; hysteresis = <2000>; type = "critical"; @@ -1638,7 +1788,7 @@ hysteresis = <2000>; type = "passive"; }; - cpu3_crit: cpu_crit { + cpu3_crit: cpu-crit { temperature = <120000>; hysteresis = <2000>; type = "critical"; diff --git a/arch/arm64/boot/dts/qcom/qdu1000-idp.dts b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts new file mode 100644 index 000000000000..9e9fd4b8023e --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts @@ -0,0 +1,453 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "qdu1000.dtsi" +#include "pm8150.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. QDU1000 IDP"; + compatible = "qcom,qdu1000-idp", "qcom,qdu1000"; + chassis-type = "embedded"; + + aliases { + serial0 = &uart7; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + clocks { + xo_board: xo-board-clk { + compatible = "fixed-clock"; + clock-frequency = <19200000>; + #clock-cells = <0>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + clock-frequency = <32000>; + #clock-cells = <0>; + }; + }; + + ppvar_sys: ppvar-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "ppvar_sys"; + regulator-min-microvolt = <4200000>; + regulator-max-microvolt = <4200000>; + + regulator-always-on; + regulator-boot-on; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&ppvar_sys>; + }; +}; + +&apps_rsc { + regulators { + compatible = "qcom,pm8150-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + + vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>; + vdd-l2-l10-supply = <&vph_pwr>; + vdd-l3-l4-l5-l18-supply = <&vreg_s5a_2p0>; + vdd-l6-l9-supply = <&vreg_s6a_0p9>; + vdd-l7-l12-l14-l15-supply = <&vreg_s4a_1p8>; + vdd-l13-l16-l17-supply = <&vph_pwr>; + + vreg_s2a_0p5: smps2 { + regulator-name = "vreg_s2a_0p5"; + regulator-min-microvolt = <320000>; + regulator-max-microvolt = <570000>; + }; + + vreg_s3a_1p05: smps3 { + regulator-name = "vreg_s3a_1p05"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1170000>; + }; + + vreg_s4a_1p8: smps4 { + regulator-name = "vreg_s4a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_s5a_2p0: smps5 { + regulator-name = "vreg_s5a_2p0"; + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2000000>; + }; + + vreg_s6a_0p9: smps6 { + regulator-name = "vreg_s6a_0p9"; + regulator-min-microvolt = <920000>; + regulator-max-microvolt = <1128000>; + }; + + vreg_s7a_1p2: smps7 { + regulator-name = "vreg_s7a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_s8a_1p3: smps8 { + regulator-name = "vreg_s8a_1p3"; + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_l1a_0p91: ldo1 { + regulator-name = "vreg_l1a_0p91"; + regulator-min-microvolt = <312000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l2a_2p3: ldo2 { + regulator-name = "vreg_l2a_2p3"; + regulator-min-microvolt = <2970000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l3a_1p2: ldo3 { + regulator-name = "vreg_l3a_1p2"; + regulator-min-microvolt = <920000>; + regulator-max-microvolt = <1260000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l5a_0p8: ldo5 { + regulator-name = "vreg_l5a_0p8"; + regulator-min-microvolt = <312000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l6a_0p91: ldo6 { + regulator-name = "vreg_l6a_0p91"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <950000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l7a_1p8: ldo7 { + regulator-name = "vreg_l7a_1p8"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + + }; + + vreg_l8a_0p91: ldo8 { + regulator-name = "vreg_l8a_0p91"; + regulator-min-microvolt = <888000>; + regulator-max-microvolt = <925000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l9a_0p91: ldo9 { + regulator-name = "vreg_l9a_0p91"; + regulator-min-microvolt = <312000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l10a_2p95: ldo10 { + regulator-name = "vreg_l10a_2p95"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l11a_0p91: ldo11 { + regulator-name = "vreg_l11a_0p91"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l12a_1p8: ldo12 { + regulator-name = "vreg_l12a_1p8"; + regulator-min-microvolt = <1504000>; + regulator-max-microvolt = <1504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l14a_1p8: ldo14 { + regulator-name = "vreg_l14a_1p8"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <1950000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l15a_1p8: ldo15 { + regulator-name = "vreg_l15a_1p8"; + regulator-min-microvolt = <1504000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l16a_1p8: ldo16 { + regulator-name = "vreg_l16a_1p8"; + regulator-min-microvolt = <1710000>; + regulator-max-microvolt = <1890000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l17a_3p3: ldo17 { + regulator-name = "vreg_l17a_3p3"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l18a_1p2: ldo18 { + regulator-name = "vreg_l18a_1p2"; + regulator-min-microvolt = <312000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + }; +}; + +&qup_i2c1_data_clk { + drive-strength = <2>; + bias-pull-up; +}; + +&qup_i2c2_data_clk { + drive-strength = <2>; + bias-pull-up; +}; + +&qup_i2c3_data_clk { + drive-strength = <2>; + bias-pull-up; +}; + +&qup_i2c4_data_clk { + drive-strength = <2>; + bias-pull-up; +}; + +&qup_i2c5_data_clk { + drive-strength = <2>; + bias-pull-up; +}; + +&qup_i2c6_data_clk { + drive-strength = <2>; + bias-pull-up; +}; + +&qup_i2c9_data_clk { + drive-strength = <2>; + bias-pull-up; +}; + +&qup_i2c10_data_clk { + drive-strength = <2>; + bias-pull-up; +}; + +&qup_i2c11_data_clk { + drive-strength = <2>; + bias-pull-up; +}; + +&qup_i2c12_data_clk { + drive-strength = <2>; + bias-pull-up; +}; + +&qup_i2c13_data_clk { + drive-strength = <2>; + bias-pull-up; +}; + +&qup_i2c14_data_clk { + drive-strength = <2>; + bias-pull-up; +}; + +&qup_i2c15_data_clk { + drive-strength = <2>; + bias-pull-up; +}; + +&qup_spi1_cs { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi1_data_clk { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi2_cs { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi2_data_clk { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi3_cs { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi3_data_clk { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi4_cs { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi4_data_clk { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi5_cs { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi5_data_clk { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi6_cs { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi6_data_clk { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi9_cs { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi9_data_clk { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi10_cs { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi10_data_clk { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi11_cs { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi11_data_clk { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi12_cs { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi12_data_clk { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi13_cs { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi13_data_clk { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi14_cs { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi14_data_clk { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi15_cs { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi15_data_clk { + drive-strength = <6>; + bias-disable; +}; + +&qup_uart7_rx { + drive-strength = <2>; + bias-disable; +}; + +&qup_uart7_tx { + drive-strength = <2>; + bias-disable; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&uart7 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi new file mode 100644 index 000000000000..f234159d2060 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi @@ -0,0 +1,1333 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#include <dt-bindings/clock/qcom,qdu1000-gcc.h> +#include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/dma/qcom-gpi.h> +#include <dt-bindings/interconnect/qcom,qdu1000-rpmh.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/soc/qcom,rpmh-rsc.h> + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + chosen: chosen { }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x0>; + enable-method = "psci"; + power-domains = <&CPU_PD0>; + power-domain-names = "psci"; + qcom,freq-domains = <&cpufreq_hw 0>; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + L3_0: l3-cache { + compatible = "cache"; + }; + }; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x100>; + enable-method = "psci"; + power-domains = <&CPU_PD1>; + power-domain-names = "psci"; + qcom,freq-domains = <&cpufreq_hw 0>; + next-level-cache = <&L2_100>; + L2_100: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x200>; + enable-method = "psci"; + power-domains = <&CPU_PD2>; + power-domain-names = "psci"; + qcom,freq-domains = <&cpufreq_hw 0>; + next-level-cache = <&L2_200>; + L2_200: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x300>; + enable-method = "psci"; + power-domains = <&CPU_PD3>; + power-domain-names = "psci"; + qcom,freq-domains = <&cpufreq_hw 0>; + next-level-cache = <&L2_300>; + L2_300: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + }; + }; + }; + + idle-states { + entry-method = "psci"; + + CPU_OFF: cpu-sleep-0 { + compatible = "arm,idle-state"; + entry-latency-us = <274>; + exit-latency-us = <480>; + min-residency-us = <3934>; + arm,psci-suspend-param = <0x40000004>; + local-timer-stop; + }; + }; + + domain-idle-states { + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "domain-idle-state"; + entry-latency-us = <584>; + exit-latency-us = <2332>; + min-residency-us = <6118>; + arm,psci-suspend-param = <0x41000044>; + }; + + CLUSTER_SLEEP_1: cluster-sleep-1 { + compatible = "domain-idle-state"; + entry-latency-us = <2893>; + exit-latency-us = <4023>; + min-residency-us = <9987>; + arm,psci-suspend-param = <0x41003344>; + }; + }; + + firmware { + scm { + compatible = "qcom,scm-qdu1000", "qcom,scm"; + }; + }; + + mc_virt: interconnect-0 { + compatible = "qcom,qdu1000-mc-virt"; + qcom,bcm-voters = <&apps_bcm_voter>; + #interconnect-cells = <2>; + }; + + clk_virt: interconnect-1 { + compatible = "qcom,qdu1000-clk-virt"; + qcom,bcm-voters = <&apps_bcm_voter>; + #interconnect-cells = <2>; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0x0 0x80000000 0x0 0x0>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + + CPU_PD0: power-domain-cpu0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&CPU_OFF>; + }; + + CPU_PD1: power-domain-cpu1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&CPU_OFF>; + }; + + CPU_PD2: power-domain-cpu2 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&CPU_OFF>; + }; + + CPU_PD3: power-domain-cpu3 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&CPU_OFF>; + }; + + CLUSTER_PD: power-domain-cluster { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_SLEEP_0 &CLUSTER_SLEEP_1>; + }; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hyp_mem: hyp@80000000 { + reg = <0x0 0x80000000 0x0 0x600000>; + no-map; + }; + + xbl_dt_log_mem: xbl-dt-log@80600000 { + reg = <0x0 0x80600000 0x0 0x40000>; + no-map; + }; + + xbl_ramdump_mem: xbl-ramdump@80640000 { + reg = <0x0 0x80640000 0x0 0x1c0000>; + no-map; + }; + + aop_image_mem: aop-image@80800000 { + reg = <0x0 0x80800000 0x0 0x60000>; + no-map; + }; + + aop_cmd_db_mem: aop-cmd-db@80860000 { + compatible = "qcom,cmd-db"; + reg = <0x0 0x80860000 0x0 0x20000>; + no-map; + }; + + aop_config_mem: aop-config@80880000 { + reg = <0x0 0x80880000 0x0 0x20000>; + no-map; + }; + + tme_crash_dump_mem: tme-crash-dump@808a0000 { + reg = <0x0 0x808a0000 0x0 0x40000>; + no-map; + }; + + tme_log_mem: tme-log@808e0000 { + reg = <0x0 0x808e0000 0x0 0x4000>; + no-map; + }; + + uefi_log_mem: uefi-log@808e4000 { + reg = <0x0 0x808e4000 0x0 0x10000>; + no-map; + }; + + smem_mem: smem@80900000 { + compatible = "qcom,smem"; + reg = <0x0 0x80900000 0x0 0x200000>; + no-map; + hwlocks = <&tcsr_mutex 3>; + }; + + cpucp_fw_mem: cpucp-fw@80b00000 { + reg = <0x0 0x80b00000 0x0 0x100000>; + no-map; + }; + + xbl_sc_mem: memory@80c00000 { + reg = <0x0 0x80c00000 0x0 0x40000>; + no-map; + }; + + tz_stat_mem: tz-stat@81d00000 { + reg = <0x0 0x81d00000 0x0 0x100000>; + no-map; + }; + + tags_mem: tags@81e00000 { + reg = <0x0 0x81e00000 0x0 0x500000>; + no-map; + }; + + qtee_mem: qtee@82300000 { + reg = <0x0 0x82300000 0x0 0x500000>; + no-map; + }; + + ta_mem: ta@82800000 { + reg = <0x0 0x82800000 0x0 0xa00000>; + no-map; + }; + + fs1_mem: fs1@83200000 { + reg = <0x0 0x83200000 0x0 0x400000>; + no-map; + }; + + fs2_mem: fs2@83600000 { + reg = <0x0 0x83600000 0x0 0x400000>; + no-map; + }; + + fs3_mem: fs3@83a00000 { + reg = <0x0 0x83a00000 0x0 0x400000>; + no-map; + }; + + /* Linux kernel image is loaded at 0x83e00000 */ + + ipa_fw_mem: ipa-fw@8be00000 { + reg = <0x0 0x8be00000 0x0 0x10000>; + no-map; + }; + + ipa_gsi_mem: ipa-gsi@8be10000 { + reg = <0x0 0x8be10000 0x0 0x14000>; + no-map; + }; + + mpss_mem: mpss@8c000000 { + reg = <0x0 0x8c000000 0x0 0x12c00000>; + no-map; + }; + + q6_mpss_dtb_mem: q6-mpss-dtb@9ec00000 { + reg = <0x0 0x9ec00000 0x0 0x80000>; + no-map; + }; + + tenx_mem: tenx@a0000000 { + reg = <0x0 0xa0000000 0x0 0x19600000>; + no-map; + }; + + oem_tenx_mem: oem-tenx@b9600000 { + reg = <0x0 0xb9600000 0x0 0x6a00000>; + no-map; + }; + + tenx_q6_buffer_mem: tenx-q6-buffer@c0000000 { + reg = <0x0 0xc0000000 0x0 0x3200000>; + no-map; + }; + + ipa_buffer_mem: ipa-buffer@c3200000 { + reg = <0x0 0xc3200000 0x0 0x12c00000>; + no-map; + }; + }; + + soc: soc@0 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0 0x10 0>; + dma-ranges = <0 0 0 0 0x10 0>; + + gcc: clock-controller@80000 { + compatible = "qcom,qdu1000-gcc"; + reg = <0x0 0x80000 0x0 0x1f4200>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&sleep_clk>, + <0>, + <0>, + <0>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + gpi_dma0: dma-controller@900000 { + compatible = "qcom,qdu1000-gpi-dma", "qcom,sm6350-gpi-dma"; + reg = <0x0 0x900000 0x0 0x60000>; + interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <12>; + dma-channel-mask = <0x3f>; + iommus = <&apps_smmu 0xf6 0x0>; + #dma-cells = <3>; + }; + + qupv3_id_0: geniqup@9c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x9c0000 0x0 0x2000>; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + clock-names = "m-ahb", "s-ahb"; + iommus = <&apps_smmu 0xe3 0x0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 + &clk_virt SLAVE_QUP_CORE_0 0>; + interconnect-names = "qup-core"; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + uart0: serial@980000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x980000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_uart0_default>; + pinctrl-names = "default"; + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@984000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x984000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&qup_i2c1_data_clk>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@984000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x984000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>; + pinctrl-names = "default"; + status = "disabled"; + }; + + i2c2: i2c@988000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x988000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&qup_i2c2_data_clk>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi2: spi@988000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x988000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>; + pinctrl-names = "default"; + status = "disabled"; + }; + + i2c3: i2c@98c000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x98c000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&qup_i2c3_data_clk>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi3: spi@98c000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x98c000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>; + pinctrl-names = "default"; + status = "disabled"; + }; + + i2c4: i2c@990000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x990000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&qup_i2c4_data_clk>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi4: spi@990000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x990000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>; + pinctrl-names = "default"; + status = "disabled"; + }; + + i2c5: i2c@994000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x994000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&qup_i2c5_data_clk>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi5: spi@994000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x994000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>; + pinctrl-names = "default"; + status = "disabled"; + }; + + i2c6: i2c@998000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x998000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&qup_i2c6_data_clk>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi6: spi@998000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x998000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>; + pinctrl-names = "default"; + status = "disabled"; + }; + + uart7: serial@99c000 { + compatible = "qcom,geni-debug-uart"; + reg = <0x0 0x99c000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>; + pinctrl-names = "default"; + interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + gpi_dma1: dma-controller@a00000 { + compatible = "qcom,qdu1000-gpi-dma", "qcom,sm6350-gpi-dma"; + reg = <0x0 0xa00000 0x0 0x60000>; + interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <12>; + dma-channel-mask = <0x3f>; + iommus = <&apps_smmu 0x116 0x0>; + #dma-cells = <3>; + }; + + qupv3_id_1: geniqup@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0xac0000 0x0 0x2000>; + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + clock-names = "m-ahb", "s-ahb"; + iommus = <&apps_smmu 0x103 0x0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + uart8: serial@a80000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0xa80000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_uart8_default>; + pinctrl-names = "default"; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c9: i2c@a84000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0xa84000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&qup_i2c9_data_clk>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi9: spi@a84000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0xa84000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>; + pinctrl-names = "default"; + status = "disabled"; + }; + + i2c10: i2c@a88000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0xa88000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&qup_i2c10_data_clk>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi10: spi@a88000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0xa88000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>; + pinctrl-names = "default"; + status = "disabled"; + }; + + i2c11: i2c@a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0xa8c000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&qup_i2c11_data_clk>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi11: spi@a8c000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0xa8c000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>; + pinctrl-names = "default"; + status = "disabled"; + }; + + i2c12: i2c@a90000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0xa90000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&qup_i2c12_data_clk>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi12: spi@a90000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0xa90000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>; + pinctrl-names = "default"; + status = "disabled"; + }; + + i2c13: i2c@a94000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0xa94000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&qup_i2c13_data_clk>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart13: serial@a94000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0xa94000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_uart13_default>; + pinctrl-names = "default"; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi13: spi@a94000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0xa94000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>; + pinctrl-names = "default"; + status = "disabled"; + }; + + i2c14: i2c@a98000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0xa98000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&qup_i2c14_data_clk>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi14: spi@a98000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0xa98000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>; + pinctrl-names = "default"; + status = "disabled"; + }; + + i2c15: i2c@a9c000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0xa9c000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&qup_i2c15_data_clk>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi15: spi@a9c000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0xa9c000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>; + pinctrl-names = "default"; + status = "disabled"; + }; + }; + + system_noc: interconnect@1640000 { + compatible = "qcom,qdu1000-system-noc"; + reg = <0x0 0x1640000 0x0 0x45080>; + qcom,bcm-voters = <&apps_bcm_voter>; + #interconnect-cells = <2>; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x0 0x1f40000 0x0 0x20000>; + #hwlock-cells = <1>; + }; + + pdc: interrupt-controller@b220000 { + compatible = "qcom,qdu1000-pdc", "qcom,pdc"; + reg = <0x0 0xb220000 0x0 0x30000>, <0x0 0x174000f0 0x0 0x64>; + qcom,pdc-ranges = <0 480 12>, <14 494 24>, <40 520 54>, + <94 609 31>, <125 63 1>; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + + spmi_bus: spmi@c400000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0 0xc400000 0x0 0x3000>, + <0x0 0xc500000 0x0 0x400000>, + <0x0 0xc440000 0x0 0x80000>, + <0x0 0xc4c0000 0x0 0x10000>, + <0x0 0xc42d000 0x0 0x4000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "periph_irq"; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + tlmm: pinctrl@f000000 { + compatible = "qcom,qdu1000-tlmm"; + reg = <0x0 0xf000000 0x0 0x1000000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 151>; + wakeup-parent = <&pdc>; + + qup_uart0_default: qup-uart0-default-state { + pins = "gpio6", "gpio7", "gpio8", "gpio9"; + function = "qup00"; + }; + + qup_i2c1_data_clk: qup-i2c1-data-clk-state { + pins = "gpio10", "gpio11"; + function = "qup01"; + }; + + qup_spi1_data_clk: qup-spi1-data-clk-state { + pins = "gpio10", "gpio11", "gpio12"; + function = "qup01"; + }; + + qup_spi1_cs: qup-spi1-cs-state { + pins = "gpio13"; + function = "gpio"; + }; + + qup_i2c2_data_clk: qup-i2c2-data-clk-state { + pins = "gpio12", "gpio13"; + function = "qup02"; + }; + + qup_spi2_data_clk: qup-spi2-data-clk-state { + pins = "gpio12", "gpio13", "gpio10"; + function = "qup02"; + }; + + qup_spi2_cs: qup-spi2-cs-state { + pins = "gpio11"; + function = "gpio"; + }; + + qup_i2c3_data_clk: qup-i2c3-data-clk-state { + pins = "gpio14", "gpio15"; + function = "qup03"; + }; + + qup_spi3_data_clk: qup-spi3-data-clk-state { + pins = "gpio14", "gpio15", "gpio16"; + function = "qup03"; + }; + + qup_spi3_cs: qup-spi3-cs-state { + pins = "gpio17"; + function = "gpio"; + }; + + qup_i2c4_data_clk: qup-i2c4-data-clk-state { + pins = "gpio16", "gpio17"; + function = "qup04"; + }; + + qup_spi4_data_clk: qup-spi4-data-clk-state { + pins = "gpio16", "gpio17", "gpio14"; + function = "qup04"; + }; + + qup_spi4_cs: qup-spi4-cs-state { + pins = "gpio15"; + function = "gpio"; + }; + + qup_i2c5_data_clk: qup-i2c5-data-clk-state { + pins = "gpio130", "gpio131"; + function = "qup05"; + }; + + qup_spi5_data_clk: qup-spi5-data-clk-state { + pins = "gpio130", "gpio131", "gpio132"; + function = "qup05"; + }; + + qup_spi5_cs: qup-spi5-cs-state { + pins = "gpio133"; + function = "gpio"; + }; + + qup_i2c6_data_clk: qup-i2c6-data-clk-state { + pins = "gpio132", "gpio133"; + function = "qup06"; + }; + + qup_spi6_data_clk: qup-spi6-data-clk-state { + pins = "gpio132", "gpio133", "gpio130"; + function = "qup06"; + }; + + qup_spi6_cs: qup-spi6-cs-state { + pins = "gpio131"; + function = "gpio"; + }; + + qup_uart7_rx: qup-uart7-rx-state { + pins = "gpio135"; + function = "qup07"; + }; + + qup_uart7_tx: qup-uart7-tx-state { + pins = "gpio134"; + function = "qup07"; + }; + + qup_uart8_default: qup-uart8-default-state { + pins = "gpio18", "gpio19", "gpio20", "gpio21"; + function = "qup10"; + }; + + qup_i2c9_data_clk: qup-i2c9-data-clk-state { + pins = "gpio22", "gpio23"; + function = "qup11"; + }; + + qup_spi9_data_clk: qup-spi9-data-clk-state { + pins = "gpio22", "gpio23", "gpio24"; + function = "qup11"; + }; + + qup_spi9_cs: qup-spi9-cs-state { + pins = "gpio25"; + function = "gpio"; + }; + + qup_i2c10_data_clk: qup-i2c10-data-clk-state { + pins = "gpio24", "gpio25"; + function = "qup12"; + }; + + qup_spi10_data_clk: qup-spi10-data-clk-state { + pins = "gpio24", "gpio25", "gpio22"; + function = "qup12"; + }; + + qup_spi10_cs: qup-spi10-cs-state { + pins = "gpio23"; + function = "gpio"; + }; + + qup_i2c11_data_clk: qup-i2c11-data-clk-state { + pins = "gpio26", "gpio27"; + function = "qup13"; + }; + + qup_spi11_data_clk: qup-spi11-data-clk-state { + pins = "gpio26", "gpio27", "gpio28"; + function = "qup13"; + }; + + qup_spi11_cs: qup-spi11-cs-state { + pins = "gpio29"; + function = "gpio"; + }; + + qup_i2c12_data_clk: qup-i2c12-data-clk-state { + pins = "gpio28", "gpio29"; + function = "qup14"; + }; + + qup_spi12_data_clk: qup-spi12-data-clk-state { + pins = "gpio28", "gpio29", "gpio26"; + function = "qup14"; + }; + + qup_spi12_cs: qup-spi12-cs-state { + pins = "gpio27"; + function = "gpio"; + }; + + qup_i2c13_data_clk: qup-i2c13-data-clk-state { + pins = "gpio30", "gpio31"; + function = "qup15"; + }; + + qup_spi13_data_clk: qup-spi13-data-clk-state { + pins = "gpio30", "gpio31", "gpio32"; + function = "qup15"; + }; + + qup_spi13_cs: qup-spi13-cs-state { + pins = "gpio33"; + function = "gpio"; + }; + + qup_uart13_default: qup-uart13-default-state { + pins = "gpio30", "gpio31", "gpio32", "gpio33"; + function = "qup15"; + }; + + qup_i2c14_data_clk: qup-i2c14-data-clk-state { + pins = "gpio34", "gpio35"; + function = "qup16"; + }; + + qup_spi14_data_clk: qup-spi14-data-clk-state { + pins = "gpio34", "gpio35", "gpio36"; + function = "qup16"; + }; + + qup_spi14_cs: qup-spi14-cs-state { + pins = "gpio37", "gpio38"; + function = "gpio"; + }; + + qup_i2c15_data_clk: qup-i2c15-data-clk-state { + pins = "gpio40", "gpio41"; + function = "qup17"; + }; + + qup_spi15_data_clk: qup-spi15-data-clk-state { + pins = "gpio40", "gpio41", "gpio30"; + function = "qup17"; + }; + + qup_spi15_cs: qup-spi15-cs-state { + pins = "gpio31"; + function = "gpio"; + }; + }; + + apps_smmu: iommu@15000000 { + compatible = "qcom,qdu1000-smmu-500", "arm,mmu-500"; + reg = <0x0 0x15000000 0x0 0x100000>; + #iommu-cells = <2>; + #global-interrupts = <2>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 671 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>; + }; + + intc: interrupt-controller@17200000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x17200000 0x0 0x10000>, /* GICD */ + <0x0 0x17260000 0x0 0x80000>; /* GICR * 4 */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>; + #interrupt-cells = <3>; + interrupt-controller; + #redistributor-regions = <1>; + redistributor-stride = <0x0 0x20000>; + }; + + timer@17420000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x0 0x17420000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x0 0x20000000>; + + frame@17421000 { + reg = <0x17421000 0x1000>, + <0x17422000 0x1000>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <0>; + }; + + frame@17423000 { + reg = <0x17423000 0x1000>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <1>; + status = "disabled"; + }; + + frame@17425000 { + reg = <0x17425000 0x1000>, + <0x17426000 0x1000>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <2>; + status = "disabled"; + }; + + frame@17427000 { + reg = <0x17427000 0x1000>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <3>; + status = "disabled"; + }; + + frame@17429000 { + reg = <0x17429000 0x1000>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <4>; + status = "disabled"; + }; + + frame@1742b000 { + reg = <0x1742b000 0x1000>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <5>; + status = "disabled"; + }; + + frame@1742d000 { + reg = <0x1742d000 0x1000>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <6>; + status = "disabled"; + }; + }; + + apps_rsc: rsc@17a00000 { + compatible = "qcom,rpmh-rsc"; + reg = <0x0 0x17a00000 0x0 0x10000>, + <0x0 0x17a10000 0x0 0x10000>, + <0x0 0x17a20000 0x0 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2"; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>, + <WAKE_TCS 3>, <CONTROL_TCS 0>; + label = "apps_rsc"; + + apps_bcm_voter: bcm-voter { + compatible = "qcom,bcm-voter"; + }; + + rpmhcc: clock-controller { + compatible = "qcom,qdu1000-rpmh-clk"; + clocks = <&xo_board>; + clock-names = "xo"; + #clock-cells = <1>; + }; + + rpmhpd: power-controller { + compatible = "qcom,qdu1000-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp1 { + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; + }; + + rpmhpd_opp_min_svs: opp2 { + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + + rpmhpd_opp_low_svs: opp3 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + + rpmhpd_opp_svs: opp4 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + rpmhpd_opp_svs_l1: opp5 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + rpmhpd_opp_nom: opp6 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + rpmhpd_opp_nom_l1: opp7 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + rpmhpd_opp_nom_l2: opp8 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; + }; + + rpmhpd_opp_turbo: opp9 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + }; + + rpmhpd_opp_turbo_l1: opp10 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + }; + }; + }; + }; + + cpufreq_hw: cpufreq@17d90000 { + compatible = "qcom,qdu1000-cpufreq-epss", "qcom,cpufreq-epss"; + reg = <0x0 0x17d90000 0x0 0x1000>, <0x0 0x17d91000 0x0 0x1000>; + reg-names = "freq-domain0", "freq-domain1"; + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>; + clock-names = "xo", "alternate"; + #freq-domain-cells = <1>; + }; + + gem_noc: interconnect@19100000 { + compatible = "qcom,qdu1000-gem-noc"; + reg = <0x0 0x19100000 0x0 0xB8080>; + qcom,bcm-voters = <&apps_bcm_voter>; + #interconnect-cells = <2>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts index 8c64cb060e21..aa0a7bd7307c 100644 --- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts @@ -238,7 +238,7 @@ }; &apps_rsc { - pm8009-rpmh-regulators { + regulators-0 { compatible = "qcom,pm8009-1-rpmh-regulators"; qcom,pmic-id = "f"; @@ -284,7 +284,7 @@ }; }; - pm8150-rpmh-regulators { + regulators-1 { compatible = "qcom,pm8150-rpmh-regulators"; qcom,pmic-id = "a"; @@ -417,7 +417,7 @@ }; }; - pm8150l-rpmh-regulators { + regulators-2 { compatible = "qcom,pm8150l-rpmh-regulators"; qcom,pmic-id = "c"; @@ -1007,6 +1007,8 @@ }; &swr0 { + status = "okay"; + left_spkr: speaker@0,3 { compatible = "sdw10217211000"; reg = <0 3>; @@ -1322,6 +1324,10 @@ status = "okay"; }; +&wsamacro { + status = "okay"; +}; + /* PINCTRL - additions to nodes defined in sm8250.dtsi */ &qup_spi0_cs_gpio { drive-strength = <6>; diff --git a/arch/arm64/boot/dts/qcom/qru1000-idp.dts b/arch/arm64/boot/dts/qcom/qru1000-idp.dts new file mode 100644 index 000000000000..2cc893ae4d10 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qru1000-idp.dts @@ -0,0 +1,453 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "qru1000.dtsi" +#include "pm8150.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. QRU1000 IDP"; + compatible = "qcom,qru1000-idp", "qcom,qru1000"; + chassis-type = "embedded"; + + aliases { + serial0 = &uart7; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + clocks { + xo_board: xo-board-clk { + compatible = "fixed-clock"; + clock-frequency = <19200000>; + #clock-cells = <0>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + clock-frequency = <32000>; + #clock-cells = <0>; + }; + }; + + ppvar_sys: ppvar-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "ppvar_sys"; + regulator-min-microvolt = <4200000>; + regulator-max-microvolt = <4200000>; + + regulator-always-on; + regulator-boot-on; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&ppvar_sys>; + }; +}; + +&apps_rsc { + regulators { + compatible = "qcom,pm8150-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + + vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>; + vdd-l2-l10-supply = <&vph_pwr>; + vdd-l3-l4-l5-l18-supply = <&vreg_s5a_2p0>; + vdd-l6-l9-supply = <&vreg_s6a_0p9>; + vdd-l7-l12-l14-l15-supply = <&vreg_s4a_1p8>; + vdd-l13-l16-l17-supply = <&vph_pwr>; + + vreg_s2a_0p5: smps2 { + regulator-name = "vreg_s2a_0p5"; + regulator-min-microvolt = <320000>; + regulator-max-microvolt = <570000>; + }; + + vreg_s3a_1p05: smps3 { + regulator-name = "vreg_s3a_1p05"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1170000>; + }; + + vreg_s4a_1p8: smps4 { + regulator-name = "vreg_s4a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_s5a_2p0: smps5 { + regulator-name = "vreg_s5a_2p0"; + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2000000>; + }; + + vreg_s6a_0p9: smps6 { + regulator-name = "vreg_s6a_0p9"; + regulator-min-microvolt = <920000>; + regulator-max-microvolt = <1128000>; + }; + + vreg_s7a_1p2: smps7 { + regulator-name = "vreg_s7a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_s8a_1p3: smps8 { + regulator-name = "vreg_s8a_1p3"; + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_l1a_0p91: ldo1 { + regulator-name = "vreg_l1a_0p91"; + regulator-min-microvolt = <312000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l2a_2p3: ldo2 { + regulator-name = "vreg_l2a_2p3"; + regulator-min-microvolt = <2970000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l3a_1p2: ldo3 { + regulator-name = "vreg_l3a_1p2"; + regulator-min-microvolt = <920000>; + regulator-max-microvolt = <1260000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l5a_0p8: ldo5 { + regulator-name = "vreg_l5a_0p8"; + regulator-min-microvolt = <312000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l6a_0p91: ldo6 { + regulator-name = "vreg_l6a_0p91"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <950000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l7a_1p8: ldo7 { + regulator-name = "vreg_l7a_1p8"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + + }; + + vreg_l8a_0p91: ldo8 { + regulator-name = "vreg_l8a_0p91"; + regulator-min-microvolt = <888000>; + regulator-max-microvolt = <925000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l9a_0p91: ldo9 { + regulator-name = "vreg_l9a_0p91"; + regulator-min-microvolt = <312000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l10a_2p95: ldo10 { + regulator-name = "vreg_l10a_2p95"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l11a_0p91: ldo11 { + regulator-name = "vreg_l11a_0p91"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l12a_1p8: ldo12 { + regulator-name = "vreg_l12a_1p8"; + regulator-min-microvolt = <1504000>; + regulator-max-microvolt = <1504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l14a_1p8: ldo14 { + regulator-name = "vreg_l14a_1p8"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <1950000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l15a_1p8: ldo15 { + regulator-name = "vreg_l15a_1p8"; + regulator-min-microvolt = <1504000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l16a_1p8: ldo16 { + regulator-name = "vreg_l16a_1p8"; + regulator-min-microvolt = <1710000>; + regulator-max-microvolt = <1890000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l17a_3p3: ldo17 { + regulator-name = "vreg_l17a_3p3"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l18a_1p2: ldo18 { + regulator-name = "vreg_l18a_1p2"; + regulator-min-microvolt = <312000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + }; +}; + +&qup_i2c1_data_clk { + drive-strength = <2>; + bias-pull-up; +}; + +&qup_i2c2_data_clk { + drive-strength = <2>; + bias-pull-up; +}; + +&qup_i2c3_data_clk { + drive-strength = <2>; + bias-pull-up; +}; + +&qup_i2c4_data_clk { + drive-strength = <2>; + bias-pull-up; +}; + +&qup_i2c5_data_clk { + drive-strength = <2>; + bias-pull-up; +}; + +&qup_i2c6_data_clk { + drive-strength = <2>; + bias-pull-up; +}; + +&qup_i2c9_data_clk { + drive-strength = <2>; + bias-pull-up; +}; + +&qup_i2c10_data_clk { + drive-strength = <2>; + bias-pull-up; +}; + +&qup_i2c11_data_clk { + drive-strength = <2>; + bias-pull-up; +}; + +&qup_i2c12_data_clk { + drive-strength = <2>; + bias-pull-up; +}; + +&qup_i2c13_data_clk { + drive-strength = <2>; + bias-pull-up; +}; + +&qup_i2c14_data_clk { + drive-strength = <2>; + bias-pull-up; +}; + +&qup_i2c15_data_clk { + drive-strength = <2>; + bias-pull-up; +}; + +&qup_spi1_cs { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi1_data_clk { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi2_cs { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi2_data_clk { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi3_cs { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi3_data_clk { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi4_cs { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi4_data_clk { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi5_cs { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi5_data_clk { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi6_cs { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi6_data_clk { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi9_cs { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi9_data_clk { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi10_cs { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi10_data_clk { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi11_cs { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi11_data_clk { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi12_cs { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi12_data_clk { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi13_cs { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi13_data_clk { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi14_cs { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi14_data_clk { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi15_cs { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi15_data_clk { + drive-strength = <6>; + bias-disable; +}; + +&qup_uart7_rx { + drive-strength = <2>; + bias-disable; +}; + +&qup_uart7_tx { + drive-strength = <2>; + bias-disable; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&uart7 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/qru1000.dtsi b/arch/arm64/boot/dts/qcom/qru1000.dtsi new file mode 100644 index 000000000000..eac5dc54a8ab --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qru1000.dtsi @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#include "qdu1000.dtsi" +/delete-node/ &tenx_mem; +/delete-node/ &oem_tenx_mem; +/delete-node/ &tenx_q6_buffer_mem; + +&reserved_memory { + oem_tenx_mem: oem-tenx@a0000000 { + reg = <0x0 0xa0000000 0x0 0x6400000>; + no-map; + }; + + mpss_diag_buffer_mem: mpss-diag-buffer@aea00000 { + reg = <0x0 0xaea00000 0x0 0x6400000>; + no-map; + }; + + tenx_q6_buffer_mem: tenx-q6-buffer@b4e00000 { + reg = <0x0 0xb4e00000 0x0 0x3200000>; + no-map; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts index f41dcc379dce..459384ec8f23 100644 --- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts +++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts @@ -23,7 +23,7 @@ stdout-path = "serial0:115200n8"; }; - vreg_3p3: vreg_3p3_regulator { + vreg_3p3: vreg-3p3-regulator { compatible = "regulator-fixed"; regulator-name = "vreg_3p3"; regulator-min-microvolt = <3300000>; @@ -72,7 +72,7 @@ }; &apps_rsc { - pmm8155au-1-rpmh-regulators { + regulators-0 { compatible = "qcom,pmm8155au-rpmh-regulators"; qcom,pmic-id = "a"; @@ -201,7 +201,7 @@ }; }; - pmm8155au-2-rpmh-regulators { + regulators-1 { compatible = "qcom,pmm8155au-rpmh-regulators"; qcom,pmic-id = "c"; diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts index 84cb6f3eeb56..fd253942e5e5 100644 --- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts +++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts @@ -11,22 +11,107 @@ #include <dt-bindings/spmi/spmi.h> #include "sa8540p.dtsi" +#include "sa8540p-pmics.dtsi" / { model = "Qualcomm SA8295P ADP"; compatible = "qcom,sa8295p-adp", "qcom,sa8540p"; aliases { - serial0 = &qup2_uart17; + serial0 = &uart17; }; chosen { stdout-path = "serial0:115200n8"; }; + + dp2-connector { + compatible = "dp-connector"; + label = "DP2"; + type = "mini"; + + hpd-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>; + + port { + dp2_connector_in: endpoint { + remote-endpoint = <&mdss1_dp0_phy_out>; + }; + }; + }; + + dp3-connector { + compatible = "dp-connector"; + label = "DP3"; + type = "mini"; + + hpd-gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>; + + port { + dp3_connector_in: endpoint { + remote-endpoint = <&mdss1_dp1_phy_out>; + }; + }; + }; + + edp0-connector { + compatible = "dp-connector"; + label = "EDP0"; + type = "mini"; + + hpd-gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; + + port { + edp0_connector_in: endpoint { + remote-endpoint = <&mdss0_dp2_phy_out>; + }; + }; + }; + + edp1-connector { + compatible = "dp-connector"; + label = "EDP1"; + type = "mini"; + + hpd-gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; + + port { + edp1_connector_in: endpoint { + remote-endpoint = <&mdss0_dp3_phy_out>; + }; + }; + }; + + edp2-connector { + compatible = "dp-connector"; + label = "EDP2"; + type = "mini"; + + hpd-gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>; + + port { + edp2_connector_in: endpoint { + remote-endpoint = <&mdss1_dp2_phy_out>; + }; + }; + }; + + edp3-connector { + compatible = "dp-connector"; + label = "EDP3"; + type = "mini"; + + hpd-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>; + + port { + edp3_connector_in: endpoint { + remote-endpoint = <&mdss1_dp3_phy_out>; + }; + }; + }; }; &apps_rsc { - pmm8540-a-regulators { + regulators-0 { compatible = "qcom,pm8150-rpmh-regulators"; qcom,pmic-id = "a"; @@ -66,7 +151,7 @@ }; }; - pmm8540-c-regulators { + regulators-1 { compatible = "qcom,pm8150-rpmh-regulators"; qcom,pmic-id = "c"; @@ -139,7 +224,7 @@ }; }; - pmm8540-g-regulators { + regulators-2 { compatible = "qcom,pm8150-rpmh-regulators"; qcom,pmic-id = "g"; @@ -159,13 +244,168 @@ vreg_l8g: ldo8 { regulator-name = "vreg_l8g"; - regulator-min-microvolt = <880000>; - regulator-max-microvolt = <880000>; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; + + vreg_l11g: ldo11 { + regulator-name = "vreg_l11g"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&dispcc0 { + status = "okay"; +}; + +&dispcc1 { + status = "okay"; +}; + +&mdss0 { + status = "okay"; +}; + +&mdss0_dp2 { + data-lanes = <0 1 2 3>; + + status = "okay"; + + ports { + port@1 { + reg = <1>; + mdss0_dp2_phy_out: endpoint { + remote-endpoint = <&edp0_connector_in>; + }; + }; }; }; +&mdss0_dp2_phy { + vdda-phy-supply = <&vreg_l8g>; + vdda-pll-supply = <&vreg_l3g>; + + status = "okay"; +}; + +&mdss0_dp3 { + data-lanes = <0 1 2 3>; + + status = "okay"; + + ports { + port@1 { + reg = <1>; + mdss0_dp3_phy_out: endpoint { + remote-endpoint = <&edp1_connector_in>; + }; + }; + }; +}; + +&mdss0_dp3_phy { + vdda-phy-supply = <&vreg_l8g>; + vdda-pll-supply = <&vreg_l3g>; + + status = "okay"; +}; + +&mdss1 { + status = "okay"; +}; + +&mdss1_dp0 { + data-lanes = <0 1 2 3>; + + status = "okay"; + + ports { + port@1 { + reg = <1>; + mdss1_dp0_phy_out: endpoint { + remote-endpoint = <&dp2_connector_in>; + }; + }; + }; +}; + +&mdss1_dp0_phy { + vdda-phy-supply = <&vreg_l11g>; + vdda-pll-supply = <&vreg_l3g>; + + status = "okay"; +}; + +&mdss1_dp1 { + data-lanes = <0 1 2 3>; + + status = "okay"; + + ports { + port@1 { + reg = <1>; + mdss1_dp1_phy_out: endpoint { + remote-endpoint = <&dp3_connector_in>; + }; + }; + }; +}; + +&mdss1_dp1_phy { + vdda-phy-supply = <&vreg_l11g>; + vdda-pll-supply = <&vreg_l3g>; + + status = "okay"; +}; + +&mdss1_dp2 { + data-lanes = <0 1 2 3>; + + status = "okay"; + + ports { + port@1 { + reg = <1>; + mdss1_dp2_phy_out: endpoint { + remote-endpoint = <&edp2_connector_in>; + }; + }; + }; +}; + +&mdss1_dp2_phy { + vdda-phy-supply = <&vreg_l11g>; + vdda-pll-supply = <&vreg_l3g>; + + status = "okay"; +}; + +&mdss1_dp3 { + data-lanes = <0 1 2 3>; + + status = "okay"; + + ports { + port@1 { + reg = <1>; + mdss1_dp3_phy_out: endpoint { + remote-endpoint = <&edp3_connector_in>; + }; + }; + }; +}; + +&mdss1_dp3_phy { + vdda-phy-supply = <&vreg_l11g>; + vdda-pll-supply = <&vreg_l3g>; + + status = "okay"; +}; + &pcie2a { perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>; wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>; @@ -240,11 +480,6 @@ status = "okay"; }; -&qup2_uart17 { - compatible = "qcom,geni-debug-uart"; - status = "okay"; -}; - &remoteproc_adsp { firmware-name = "qcom/sa8540p/adsp.mbn"; status = "okay"; @@ -260,82 +495,9 @@ status = "okay"; }; -&spmi_bus { - pm8450a: pmic@0 { - compatible = "qcom,pm8150", "qcom,spmi-pmic"; - reg = <0x0 SPMI_USID>; - #address-cells = <1>; - #size-cells = <0>; - - rtc@6000 { - compatible = "qcom,pm8941-rtc"; - reg = <0x6000>; - reg-names = "rtc", "alarm"; - interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>; - wakeup-source; - }; - - pm8450a_gpios: gpio@c000 { - compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio"; - reg = <0xc000>; - gpio-controller; - gpio-ranges = <&pm8450a_gpios 0 0 10>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - }; - - pm8450c: pmic@4 { - compatible = "qcom,pm8150", "qcom,spmi-pmic"; - reg = <0x4 SPMI_USID>; - #address-cells = <1>; - #size-cells = <0>; - - pm8450c_gpios: gpio@c000 { - compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio"; - reg = <0xc000>; - gpio-controller; - gpio-ranges = <&pm8450c_gpios 0 0 10>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - }; - - pm8450e: pmic@8 { - compatible = "qcom,pm8150", "qcom,spmi-pmic"; - reg = <0x8 SPMI_USID>; - #address-cells = <1>; - #size-cells = <0>; - - pm8450e_gpios: gpio@c000 { - compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio"; - reg = <0xc000>; - gpio-controller; - gpio-ranges = <&pm8450e_gpios 0 0 10>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - }; - - pm8450g: pmic@c { - compatible = "qcom,pm8150", "qcom,spmi-pmic"; - reg = <0xc SPMI_USID>; - #address-cells = <1>; - #size-cells = <0>; - - pm8450g_gpios: gpio@c000 { - compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio"; - reg = <0xc000>; - gpio-controller; - gpio-ranges = <&pm8450g_gpios 0 0 10>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - }; +&uart17 { + compatible = "qcom,geni-debug-uart"; + status = "okay"; }; &ufs_mem_hc { diff --git a/arch/arm64/boot/dts/qcom/pm8450a.dtsi b/arch/arm64/boot/dts/qcom/sa8540p-pmics.dtsi index 34fc72896761..1221be89b3de 100644 --- a/arch/arm64/boot/dts/qcom/pm8450a.dtsi +++ b/arch/arm64/boot/dts/qcom/sa8540p-pmics.dtsi @@ -4,71 +4,80 @@ * Copyright (c) 2022, Linaro Limited */ +#include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/spmi/spmi.h> &spmi_bus { - pm8450a: pmic@0 { + pmm8540a: pmic@0 { compatible = "qcom,pm8150", "qcom,spmi-pmic"; reg = <0x0 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; - pm8450a_gpios: gpio@c000 { + rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000>, <0x6100>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>; + wakeup-source; + }; + + pmm8540a_gpios: gpio@c000 { compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; - gpio-ranges = <&pm8450a_gpios 0 0 10>; + gpio-ranges = <&pmm8540a_gpios 0 0 10>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; }; - pm8450c: pmic@4 { + pmm8540c: pmic@4 { compatible = "qcom,pm8150", "qcom,spmi-pmic"; reg = <0x4 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; - pm8450c_gpios: gpio@c000 { + pmm8540c_gpios: gpio@c000 { compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; - gpio-ranges = <&pm8450c_gpios 0 0 10>; + gpio-ranges = <&pmm8540c_gpios 0 0 10>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; }; - pm8450e: pmic@8 { + pmm8540e: pmic@8 { compatible = "qcom,pm8150", "qcom,spmi-pmic"; reg = <0x8 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; - pm8450e_gpios: gpio@c000 { + pmm8540e_gpios: gpio@c000 { compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; - gpio-ranges = <&pm8450e_gpios 0 0 10>; + gpio-ranges = <&pmm8540e_gpios 0 0 10>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; }; - pm8450g: pmic@c { + pmm8540g: pmic@c { compatible = "qcom,pm8150", "qcom,spmi-pmic"; reg = <0xc SPMI_USID>; #address-cells = <1>; #size-cells = <0>; - pm8450g_gpios: gpio@c000 { + pmm8540g_gpios: gpio@c000 { compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; - gpio-ranges = <&pm8450g_gpios 0 0 10>; + gpio-ranges = <&pmm8540g_gpios 0 0 10>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts index 6c547f1b13dc..3ccb5ffdb3ca 100644 --- a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts +++ b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts @@ -10,14 +10,19 @@ #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "sa8540p.dtsi" -#include "pm8450a.dtsi" +#include "sa8540p-pmics.dtsi" / { model = "Qualcomm SA8540P Ride"; compatible = "qcom,sa8540p-ride", "qcom,sa8540p"; aliases { - serial0 = &qup2_uart17; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c12 = &i2c12; + i2c15 = &i2c15; + i2c18 = &i2c18; + serial0 = &uart17; }; chosen { @@ -146,6 +151,62 @@ }; }; +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_default>; + + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_default>; + + status = "okay"; +}; + +&i2c12 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c12_default>; + + status = "okay"; +}; + +&i2c15 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c15_default>; + + status = "okay"; +}; + +&i2c18 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c18_default>; + + status = "okay"; +}; + +&pcie2a { + ranges = <0x01000000 0x0 0x3c200000 0x0 0x3c200000 0x0 0x100000>, + <0x02000000 0x0 0x3c300000 0x0 0x3c300000 0x0 0x1d00000>, + <0x03000000 0x5 0x00000000 0x5 0x00000000 0x1 0x00000000>; + + perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 145 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie2a_default>; + + status = "okay"; +}; + +&pcie2a_phy { + vdda-phy-supply = <&vreg_l11a>; + vdda-pll-supply = <&vreg_l3a>; + + status = "okay"; +}; + &pcie3a { ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>, <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x20000000>, @@ -167,12 +228,15 @@ status = "okay"; }; -&qup2 { +&qup0 { status = "okay"; }; -&qup2_uart17 { - compatible = "qcom,geni-debug-uart"; +&qup1 { + status = "okay"; +}; + +&qup2 { status = "okay"; }; @@ -186,29 +250,9 @@ status = "okay"; }; -&tlmm { - pcie3a_default: pcie3a-default-state { - perst-pins { - pins = "gpio151"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - }; - - clkreq-pins { - pins = "gpio150"; - function = "pcie3a_clkreq"; - drive-strength = <2>; - bias-pull-up; - }; - - wake-pins { - pins = "gpio56"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; +&uart17 { + compatible = "qcom,geni-debug-uart"; + status = "okay"; }; &ufs_mem_hc { @@ -268,3 +312,93 @@ &xo_board_clk { clock-frequency = <38400000>; }; + +/* PINCTRL */ + +&tlmm { + i2c0_default: i2c0-default-state { + /* To USB7002T-I/KDXVA0 USB hub (SIP1 only) */ + pins = "gpio135", "gpio136"; + function = "qup0"; + drive-strength = <2>; + bias-pull-up; + }; + + i2c1_default: i2c1-default-state { + /* To PM40028B-F3EI PCIe switch */ + pins = "gpio158", "gpio159"; + function = "qup1"; + drive-strength = <2>; + bias-pull-up; + }; + + i2c12_default: i2c12-default-state { + /* To Maxim max20411 */ + pins = "gpio0", "gpio1"; + function = "qup12"; + drive-strength = <2>; + bias-pull-up; + }; + + i2c15_default: i2c15-default-state { + /* To display connector (SIP1 only) */ + pins = "gpio36", "gpio37"; + function = "qup15"; + drive-strength = <2>; + bias-pull-up; + }; + + i2c18_default: i2c18-default-state { + /* To ASM330LHH IMU (SIP1 only) */ + pins = "gpio66", "gpio67"; + function = "qup18"; + drive-strength = <2>; + bias-pull-up; + }; + + pcie2a_default: pcie2a-default-state { + perst-pins { + pins = "gpio143"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq-pins { + pins = "gpio142"; + function = "pcie2a_clkreq"; + drive-strength = <2>; + bias-pull-up; + }; + + wake-pins { + pins = "gpio145"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie3a_default: pcie3a-default-state { + perst-pins { + pins = "gpio151"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq-pins { + pins = "gpio150"; + function = "pcie3a_clkreq"; + drive-strength = <2>; + bias-pull-up; + }; + + wake-pins { + pins = "gpio56"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sa8540p.dtsi b/arch/arm64/boot/dts/qcom/sa8540p.dtsi index a88452c20d05..4a990fda8fc3 100644 --- a/arch/arm64/boot/dts/qcom/sa8540p.dtsi +++ b/arch/arm64/boot/dts/qcom/sa8540p.dtsi @@ -10,7 +10,7 @@ /delete-node/ &cpu4_opp_table; / { - cpu0_opp_table: cpu0-opp-table { + cpu0_opp_table: opp-table-cpu0 { compatible = "operating-points-v2"; opp-shared; @@ -92,7 +92,7 @@ }; }; - cpu4_opp_table: cpu4-opp-table { + cpu4_opp_table: opp-table-cpu4 { compatible = "operating-points-v2"; opp-shared; diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts index 70fd9ff8dfa2..c3bdd3295c02 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts @@ -80,11 +80,17 @@ reg = <0x0 0x94400000 0x0 0x200000>; no-map; }; + + mdata_mem: mpss-metadata { + alloc-ranges = <0x0 0xa0000000 0x0 0x20000000>; + size = <0x0 0x4000>; + no-map; + }; }; }; &apps_rsc { - pm6150-rpmh-regulators { + regulators-0 { compatible = "qcom,pm6150-rpmh-regulators"; qcom,pmic-id = "a"; @@ -206,7 +212,7 @@ }; }; - pm6150l-rpmh-regulators { + regulators-1 { compatible = "qcom,pm6150l-rpmh-regulators"; qcom,pmic-id = "c"; @@ -304,7 +310,7 @@ pinctrl-names = "default"; pinctrl-0 = <&disp_pins>; - reset-gpios = <&pm6150l_gpio 3 GPIO_ACTIVE_HIGH>; + reset-gpios = <&pm6150l_gpios 3 GPIO_ACTIVE_HIGH>; ports { #address-cells = <1>; @@ -370,8 +376,26 @@ &remoteproc_mpss { status = "okay"; compatible = "qcom,sc7180-mss-pil"; + reg = <0 0x04080000 0 0x4040>, <0 0x04180000 0 0x48>; + reg-names = "qdsp6", "rmb"; + + clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, + <&gcc GCC_MSS_Q6_MEMNOC_AXI_CLK>, + <&gcc GCC_MSS_NAV_AXI_CLK>, + <&gcc GCC_MSS_SNOC_AXI_CLK>, + <&gcc GCC_MSS_MFAB_AXIS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "bus", "nav", "snoc_axi", "mnoc_axi", "xo"; + iommus = <&apps_smmu 0x461 0x0>, <&apps_smmu 0x444 0x3>; - memory-region = <&mba_mem &mpss_mem>; + memory-region = <&mba_mem>, <&mpss_mem>, <&mdata_mem>; + + resets = <&aoss_reset AOSS_CC_MSS_RESTART>, + <&pdc_reset PDC_MODEM_SYNC_RESET>; + reset-names = "mss_restart", "pdc_reset"; + + qcom,halt-regs = <&tcsr_regs_1 0x3000 0x5000 0x4000>; + qcom,spare-regs = <&tcsr_regs_2 0xb3e4>; }; &sdhc_1 { @@ -406,7 +430,7 @@ pinctrl-names = "default", "sleep"; pinctrl-1 = <&qup_uart3_sleep>; - bluetooth: wcn3990-bt { + bluetooth: bluetooth { compatible = "qcom,wcn3990-bt"; vddio-supply = <&vreg_l10a_1p8>; vddxo-supply = <&vreg_l1c_1p8>; @@ -467,7 +491,7 @@ /* PINCTRL - additions to nodes defined in sc7180.dtsi */ -&pm6150l_gpio { +&pm6150l_gpios { disp_pins: disp-state { pinconf { pins = "gpio3"; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi index d3cf64c16dcd..b3ba23a88a0b 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi @@ -85,6 +85,24 @@ }; }; +/* + * ADDITIONS TO FIXED REGULATORS DEFINED IN PARENT DEVICE TREE FILES + * + * Sort order matches the order in the parent files (parents before children). + */ + +&pp3300_dx_edp { + /* + * The atna33xc20 really likes to be power cycled to keep it from + * getting in a bad state. This is the reason that the touchscreen + * rail and eDP rails are separate from each other on homestar (but + * not other trogdor devices) Make sure it starts "off" at bootup. + */ + /delete-property/ regulator-boot-on; +}; + +/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ + ap_ts_pen_1v8: &i2c4 { status = "okay"; clock-frequency = <400000>; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lte-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lte-sku.dtsi index fd4b71203754..bffcbd141bd7 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lte-sku.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lte-sku.dtsi @@ -19,12 +19,11 @@ }; &ipa { - status = "okay"; - /* * Trogdor doesn't have QHEE (Qualcomm's EL2 blob), so the * modem needs to cover certain init steps (GSI init), and * the AP needs to wait for it. */ - modem-init; + qcom,gsi-loader = "modem"; + status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi index ebd6765e2afa..5aa7949b5328 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi @@ -26,6 +26,26 @@ }; }; +/* + * ADDITIONS TO FIXED REGULATORS DEFINED IN PARENT DEVICE TREE FILES + * + * Sort order matches the order in the parent files (parents before children). + */ + +&pp3300_dx_edp { + off-on-delay-us = <500000>; + + /* + * It's nicer to start with this regulator enabled. The + * bootloader may have left it on and it's nice not to cause an + * extra power cycle of the touchscreen and eDP panel at bootup. + * This should help speed bootup because we have off-on-delay-us. + */ + regulator-boot-on; +}; + +/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ + &dsi0_out { remote-endpoint = <&ps8640_in>; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi index 5702325d0c7b..bc4f3b6c6634 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi @@ -14,6 +14,25 @@ realtek,dmic-clk-rate-hz = <2048000>; }; +ap_ts_pen_1v8: &i2c4 { + clock-frequency = <400000>; + status = "okay"; + + ap_ts: touchscreen@10 { + compatible = "elan,ekth3915", "elan,ekth3500"; + reg = <0x10>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_l>, <&ts_reset_l>; + + interrupt-parent = <&tlmm>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + + vcc33-supply = <&pp3300_ts>; + vccio-supply = <&pp1800_l10a>; + reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; + }; +}; + &keyboard_controller { function-row-physmap = < MATRIX_KEY(0x00, 0x02, 0) /* T1 */ @@ -48,3 +67,7 @@ compatible = "google,sc7180-trogdor"; model = "sc7180-rt5682s-max98357a-1mic"; }; + +&wifi { + qcom,ath10k-calibration-variant = "GO_PAZQUEL360"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi index 65333709e529..e52b8776755d 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi @@ -7,6 +7,26 @@ #include <dt-bindings/gpio/gpio.h> +/* + * ADDITIONS TO FIXED REGULATORS DEFINED IN PARENT DEVICE TREE FILES + * + * Sort order matches the order in the parent files (parents before children). + */ + +&pp3300_dx_edp { + off-on-delay-us = <500000>; + + /* + * It's nicer to start with this regulator enabled. The + * bootloader may have left it on and it's nice not to cause an + * extra power cycle of the touchscreen and eDP panel at bootup. + * This should help speed bootup because we have off-on-delay-us. + */ + regulator-boot-on; +}; + +/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ + &dsi0_out { remote-endpoint = <&sn65dsi86_in>; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi index f1defb94d670..423630c4d02c 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi @@ -81,6 +81,12 @@ reg = <0x0 0x94400000 0x0 0x200000>; no-map; }; + + mdata_mem: mpss-metadata { + alloc-ranges = <0x0 0xa0000000 0x0 0x20000000>; + size = <0x0 0x4000>; + no-map; + }; }; aliases { @@ -432,7 +438,7 @@ }; &apps_rsc { - pm6150-rpmh-regulators { + regulators-0 { compatible = "qcom,pm6150-rpmh-regulators"; qcom,pmic-id = "a"; @@ -545,7 +551,7 @@ }; }; - pm6150l-rpmh-regulators { + regulators-1 { compatible = "qcom,pm6150l-rpmh-regulators"; qcom,pmic-id = "c"; @@ -788,18 +794,18 @@ hp_i2c: &i2c9 { #address-cells = <1>; #size-cells = <0>; - mi2s@0 { + dai-link@0 { reg = <MI2S_PRIMARY>; qcom,playback-sd-lines = <1>; qcom,capture-sd-lines = <0>; }; - secondary_mi2s: mi2s@1 { + secondary_mi2s: dai-link@1 { reg = <MI2S_SECONDARY>; qcom,playback-sd-lines = <0>; }; - hdmi@5 { + dai-link@5 { reg = <LPASS_DP_RX>; }; }; @@ -816,7 +822,11 @@ hp_i2c: &i2c9 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&dp_hot_plug_det>; +}; + +&mdss_dp_out { data-lanes = <0 1>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000>; }; &pm6150_adc { @@ -853,12 +863,30 @@ hp_i2c: &i2c9 { &remoteproc_mpss { status = "okay"; compatible = "qcom,sc7180-mss-pil"; + reg = <0 0x04080000 0 0x4040>, <0 0x04180000 0 0x48>; + reg-names = "qdsp6", "rmb"; + + clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, + <&gcc GCC_MSS_Q6_MEMNOC_AXI_CLK>, + <&gcc GCC_MSS_NAV_AXI_CLK>, + <&gcc GCC_MSS_SNOC_AXI_CLK>, + <&gcc GCC_MSS_MFAB_AXIS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "bus", "nav", "snoc_axi", "mnoc_axi", "xo"; + iommus = <&apps_smmu 0x461 0x0>, <&apps_smmu 0x444 0x3>; - memory-region = <&mba_mem &mpss_mem>; + memory-region = <&mba_mem>, <&mpss_mem>, <&mdata_mem>; /* This gets overridden for SKUs with LTE support. */ firmware-name = "qcom/sc7180-trogdor/modem-nolte/mba.mbn", "qcom/sc7180-trogdor/modem-nolte/qdsp6sw.mbn"; + + resets = <&aoss_reset AOSS_CC_MSS_RESTART>, + <&pdc_reset PDC_MODEM_SYNC_RESET>; + reset-names = "mss_restart", "pdc_reset"; + + qcom,halt-regs = <&tcsr_regs_1 0x3000 0x5000 0x4000>; + qcom,spare-regs = <&tcsr_regs_2 0xb3e4>; }; &sdhc_1 { @@ -1141,11 +1169,11 @@ ap_spi_fp: &spi10 { /* PINCTRL - board-specific pinctrl */ -&pm6150_gpio { +&pm6150_gpios { status = "disabled"; /* No GPIOs are connected */ }; -&pm6150l_gpio { +&pm6150l_gpios { gpio-line-names = "AP_SUSPEND", "", "", @@ -1376,7 +1404,15 @@ ap_spi_fp: &spi10 { pins = "gpio8"; function = "gpio"; bias-disable; - drive-strength = <2>; + + /* + * The reset GPIO to the touchscreen takes almost 2ms to drop + * at the default drive strength. When we bump it up to 8mA it + * falls in under 500us. We want this to be fast since the Elan + * datasheet (and any drivers written based on it) talk about using + * a 500 us reset pulse. + */ + drive-strength = <8>; }; sdc1_on: sdc1-on-state { diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index f71cf21a8dd8..ebfa21e9ed8a 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -27,8 +27,6 @@ #address-cells = <2>; #size-cells = <2>; - chosen { }; - aliases { mmc1 = &sdhc_1; mmc2 = &sdhc_2; @@ -54,6 +52,8 @@ spi11 = &spi11; }; + chosen { }; + clocks { xo_board: xo-board { compatible = "fixed-clock"; @@ -68,62 +68,6 @@ }; }; - reserved_memory: reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - hyp_mem: memory@80000000 { - reg = <0x0 0x80000000 0x0 0x600000>; - no-map; - }; - - xbl_mem: memory@80600000 { - reg = <0x0 0x80600000 0x0 0x200000>; - no-map; - }; - - aop_mem: memory@80800000 { - reg = <0x0 0x80800000 0x0 0x20000>; - no-map; - }; - - aop_cmd_db_mem: memory@80820000 { - reg = <0x0 0x80820000 0x0 0x20000>; - compatible = "qcom,cmd-db"; - no-map; - }; - - sec_apps_mem: memory@808ff000 { - reg = <0x0 0x808ff000 0x0 0x1000>; - no-map; - }; - - smem_mem: memory@80900000 { - reg = <0x0 0x80900000 0x0 0x200000>; - no-map; - }; - - tz_mem: memory@80b00000 { - reg = <0x0 0x80b00000 0x0 0x3900000>; - no-map; - }; - - ipa_fw_mem: memory@8b700000 { - reg = <0 0x8b700000 0 0x10000>; - no-map; - }; - - rmtfs_mem: memory@94600000 { - compatible = "qcom,rmtfs-mem"; - reg = <0x0 0x94600000 0x0 0x200000>; - no-map; - - qcom,client-id = <1>; - qcom,vmid = <15>; - }; - }; - cpus { #address-cells = <2>; #size-cells = <0>; @@ -146,9 +90,11 @@ qcom,freq-domain = <&cpufreq_hw 0>; L2_0: l2-cache { compatible = "cache"; + cache-level = <2>; next-level-cache = <&L3_0>; L3_0: l3-cache { compatible = "cache"; + cache-level = <3>; }; }; }; @@ -171,6 +117,7 @@ qcom,freq-domain = <&cpufreq_hw 0>; L2_100: l2-cache { compatible = "cache"; + cache-level = <2>; next-level-cache = <&L3_0>; }; }; @@ -193,6 +140,7 @@ qcom,freq-domain = <&cpufreq_hw 0>; L2_200: l2-cache { compatible = "cache"; + cache-level = <2>; next-level-cache = <&L3_0>; }; }; @@ -215,6 +163,7 @@ qcom,freq-domain = <&cpufreq_hw 0>; L2_300: l2-cache { compatible = "cache"; + cache-level = <2>; next-level-cache = <&L3_0>; }; }; @@ -237,6 +186,7 @@ qcom,freq-domain = <&cpufreq_hw 0>; L2_400: l2-cache { compatible = "cache"; + cache-level = <2>; next-level-cache = <&L3_0>; }; }; @@ -259,6 +209,7 @@ qcom,freq-domain = <&cpufreq_hw 0>; L2_500: l2-cache { compatible = "cache"; + cache-level = <2>; next-level-cache = <&L3_0>; }; }; @@ -281,6 +232,7 @@ qcom,freq-domain = <&cpufreq_hw 1>; L2_600: l2-cache { compatible = "cache"; + cache-level = <2>; next-level-cache = <&L3_0>; }; }; @@ -303,6 +255,7 @@ qcom,freq-domain = <&cpufreq_hw 1>; L2_700: l2-cache { compatible = "cache"; + cache-level = <2>; next-level-cache = <&L3_0>; }; }; @@ -398,6 +351,18 @@ }; }; + firmware { + scm { + compatible = "qcom,scm-sc7180", "qcom,scm"; + }; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0 0x80000000 0 0>; + }; + cpu0_opp_table: opp-table-cpu0 { compatible = "operating-points-v2"; opp-shared; @@ -538,10 +503,42 @@ }; }; - memory@80000000 { - device_type = "memory"; - /* We expect the bootloader to fill in the size */ - reg = <0 0x80000000 0 0>; + qspi_opp_table: opp-table-qspi { + compatible = "operating-points-v2"; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-150000000 { + opp-hz = /bits/ 64 <150000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + + qup_opp_table: opp-table-qup { + compatible = "operating-points-v2"; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-128000000 { + opp-hz = /bits/ 64 <128000000>; + required-opps = <&rpmhpd_opp_nom>; + }; }; pmu { @@ -549,9 +546,64 @@ interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>; }; - firmware { - scm { - compatible = "qcom,scm-sc7180", "qcom,scm"; + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hyp_mem: memory@80000000 { + reg = <0x0 0x80000000 0x0 0x600000>; + no-map; + }; + + xbl_mem: memory@80600000 { + reg = <0x0 0x80600000 0x0 0x200000>; + no-map; + }; + + aop_mem: memory@80800000 { + reg = <0x0 0x80800000 0x0 0x20000>; + no-map; + }; + + aop_cmd_db_mem: memory@80820000 { + reg = <0x0 0x80820000 0x0 0x20000>; + compatible = "qcom,cmd-db"; + no-map; + }; + + sec_apps_mem: memory@808ff000 { + reg = <0x0 0x808ff000 0x0 0x1000>; + no-map; + }; + + smem_mem: memory@80900000 { + reg = <0x0 0x80900000 0x0 0x200000>; + no-map; + }; + + tz_mem: memory@80b00000 { + reg = <0x0 0x80b00000 0x0 0x3900000>; + no-map; + }; + + ipa_fw_mem: memory@8b700000 { + reg = <0 0x8b700000 0 0x10000>; + no-map; + }; + + rmtfs_mem: memory@94600000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0x94600000 0x0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; }; }; @@ -640,11 +692,6 @@ }; }; - psci { - compatible = "arm,psci-1.0"; - method = "smc"; - }; - soc: soc@0 { #address-cells = <2>; #size-cells = <2>; @@ -690,8 +737,8 @@ sdhc_1: mmc@7c4000 { compatible = "qcom,sc7180-sdhci", "qcom,sdhci-msm-v5"; - reg = <0 0x7c4000 0 0x1000>, - <0 0x07c5000 0 0x1000>; + reg = <0 0x007c4000 0 0x1000>, + <0 0x007c5000 0 0x1000>; reg-names = "hc", "cqhci"; iommus = <&apps_smmu 0x60 0x0>; @@ -739,25 +786,6 @@ }; }; - qup_opp_table: opp-table-qup { - compatible = "operating-points-v2"; - - opp-75000000 { - opp-hz = /bits/ 64 <75000000>; - required-opps = <&rpmhpd_opp_low_svs>; - }; - - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - required-opps = <&rpmhpd_opp_svs>; - }; - - opp-128000000 { - opp-hz = /bits/ 64 <128000000>; - required-opps = <&rpmhpd_opp_nom>; - }; - }; - qupv3_id_0: geniqup@8c0000 { compatible = "qcom,geni-se-qup"; reg = <0 0x008c0000 0 0x6000>; @@ -1421,9 +1449,9 @@ iommus = <&apps_smmu 0x440 0x0>, <&apps_smmu 0x442 0x0>; - reg = <0 0x1e40000 0 0x7000>, - <0 0x1e47000 0 0x2000>, - <0 0x1e04000 0 0x2c000>; + reg = <0 0x01e40000 0 0x7000>, + <0 0x01e47000 0 0x2000>, + <0 0x01e04000 0 0x2c000>; reg-names = "ipa-reg", "ipa-shared", "gsi"; @@ -1929,8 +1957,7 @@ remoteproc_mpss: remoteproc@4080000 { compatible = "qcom,sc7180-mpss-pas"; - reg = <0 0x04080000 0 0x4040>, <0 0x04180000 0 0x48>; - reg-names = "qdsp6", "rmb"; + reg = <0 0x04080000 0 0x4040>; interrupts-extended = <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>, <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, @@ -1941,14 +1968,8 @@ interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack", "shutdown-ack"; - clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, - <&gcc GCC_MSS_Q6_MEMNOC_AXI_CLK>, - <&gcc GCC_MSS_NAV_AXI_CLK>, - <&gcc GCC_MSS_SNOC_AXI_CLK>, - <&gcc GCC_MSS_MFAB_AXIS_CLK>, - <&rpmhcc RPMH_CXO_CLK>; - clock-names = "iface", "bus", "nav", "snoc_axi", - "mnoc_axi", "xo"; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; power-domains = <&rpmhpd SC7180_CX>, <&rpmhpd SC7180_MX>, @@ -1962,13 +1983,6 @@ qcom,smem-states = <&modem_smp2p_out 0>; qcom,smem-state-names = "stop"; - resets = <&aoss_reset AOSS_CC_MSS_RESTART>, - <&pdc_reset PDC_MODEM_SYNC_RESET>; - reset-names = "mss_restart", "pdc_reset"; - - qcom,halt-regs = <&tcsr_regs_1 0x3000 0x5000 0x4000>; - qcom,spare-regs = <&tcsr_regs_2 0xb3e4>; - status = "disabled"; glink-edge { @@ -2123,6 +2137,12 @@ #power-domain-cells = <1>; }; + dma@10a2000 { + compatible = "qcom,sc7180-dcc", "qcom,dcc"; + reg = <0x0 0x010a2000 0x0 0x1000>, + <0x0 0x010ae000 0x0 0x2000>; + }; + stm@6002000 { compatible = "arm,coresight-stm", "arm,primecell"; reg = <0 0x06002000 0 0x1000>, @@ -2655,25 +2675,6 @@ }; }; - qspi_opp_table: opp-table-qspi { - compatible = "operating-points-v2"; - - opp-75000000 { - opp-hz = /bits/ 64 <75000000>; - required-opps = <&rpmhpd_opp_low_svs>; - }; - - opp-150000000 { - opp-hz = /bits/ 64 <150000000>; - required-opps = <&rpmhpd_opp_svs>; - }; - - opp-300000000 { - opp-hz = /bits/ 64 <300000000>; - required-opps = <&rpmhpd_opp_nom>; - }; - }; - qspi: spi@88dc000 { compatible = "qcom,sc7180-qspi", "qcom,qspi-v1"; reg = <0 0x088dc000 0 0x600>; @@ -2921,7 +2922,7 @@ #power-domain-cells = <1>; }; - mdss: mdss@ae00000 { + mdss: display-subsystem@ae00000 { compatible = "qcom,sc7180-mdss"; reg = <0 0x0ae00000 0 0x1000>; reg-names = "mdss"; @@ -3022,7 +3023,8 @@ }; dsi0: dsi@ae94000 { - compatible = "qcom,mdss-dsi-ctrl"; + compatible = "qcom,sc7180-dsi-ctrl", + "qcom,mdss-dsi-ctrl"; reg = <0 0x0ae94000 0 0x400>; reg-names = "dsi_ctrl"; @@ -3116,11 +3118,11 @@ compatible = "qcom,sc7180-dp"; status = "disabled"; - reg = <0 0xae90000 0 0x200>, - <0 0xae90200 0 0x200>, - <0 0xae90400 0 0xc00>, - <0 0xae91000 0 0x400>, - <0 0xae91400 0 0x400>; + reg = <0 0x0ae90000 0 0x200>, + <0 0x0ae90200 0 0x200>, + <0 0x0ae90400 0 0xc00>, + <0 0x0ae91000 0 0x400>, + <0 0x0ae91400 0 0x400>; interrupt-parent = <&mdss>; interrupts = <12>; @@ -3155,7 +3157,7 @@ port@1 { reg = <1>; - dp_out: endpoint { }; + mdss_dp_out: endpoint { }; }; }; @@ -3248,7 +3250,7 @@ #reset-cells = <1>; }; - aoss_qmp: power-controller@c300000 { + aoss_qmp: power-management@c300000 { compatible = "qcom,sc7180-aoss-qmp", "qcom,aoss-qmp"; reg = <0 0x0c300000 0 0x400>; interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>; @@ -3274,8 +3276,8 @@ interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; qcom,ee = <0>; qcom,channel = <0>; - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <0>; interrupt-controller; #interrupt-cells = <4>; cell-index = <0>; @@ -3417,7 +3419,7 @@ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; }; - timer@17c20000{ + timer@17c20000 { #address-cells = <1>; #size-cells = <1>; ranges = <0 0 0 0x20000000>; @@ -3625,6 +3627,7 @@ <&apps_smmu 0x1032 0>; power-domains = <&lpass_hm LPASS_CORE_HM_GDSCR>; + required-opps = <&rpmhpd_opp_nom>; status = "disabled"; @@ -3655,6 +3658,8 @@ clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>, <&rpmhcc RPMH_CXO_CLK>; clock-names = "iface", "bi_tcxo"; + power-domains = <&rpmhpd SC7180_CX>; + #clock-cells = <1>; #power-domain-cells = <1>; }; @@ -3681,7 +3686,7 @@ type = "passive"; }; - cpu0_crit: cpu_crit { + cpu0_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -3730,7 +3735,7 @@ type = "passive"; }; - cpu1_crit: cpu_crit { + cpu1_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -3779,7 +3784,7 @@ type = "passive"; }; - cpu2_crit: cpu_crit { + cpu2_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -3828,7 +3833,7 @@ type = "passive"; }; - cpu3_crit: cpu_crit { + cpu3_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -3877,7 +3882,7 @@ type = "passive"; }; - cpu4_crit: cpu_crit { + cpu4_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -3926,7 +3931,7 @@ type = "passive"; }; - cpu5_crit: cpu_crit { + cpu5_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -3975,7 +3980,7 @@ type = "passive"; }; - cpu6_crit: cpu_crit { + cpu6_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -4016,7 +4021,7 @@ type = "passive"; }; - cpu7_crit: cpu_crit { + cpu7_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -4057,7 +4062,7 @@ type = "passive"; }; - cpu8_crit: cpu_crit { + cpu8_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -4098,7 +4103,7 @@ type = "passive"; }; - cpu9_crit: cpu_crit { + cpu9_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -4132,7 +4137,7 @@ type = "hot"; }; - aoss0_crit: aoss0_crit { + aoss0_crit: aoss0-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -4152,7 +4157,7 @@ hysteresis = <2000>; type = "hot"; }; - cpuss0_crit: cluster0_crit { + cpuss0_crit: cluster0-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -4172,7 +4177,7 @@ hysteresis = <2000>; type = "hot"; }; - cpuss1_crit: cluster0_crit { + cpuss1_crit: cluster0-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -4193,7 +4198,7 @@ type = "passive"; }; - gpuss0_crit: gpuss0_crit { + gpuss0_crit: gpuss0-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -4221,7 +4226,7 @@ type = "passive"; }; - gpuss1_crit: gpuss1_crit { + gpuss1_crit: gpuss1-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -4249,7 +4254,7 @@ type = "hot"; }; - aoss1_crit: aoss1_crit { + aoss1_crit: aoss1-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -4270,7 +4275,7 @@ type = "hot"; }; - cwlan_crit: cwlan_crit { + cwlan_crit: cwlan-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -4291,7 +4296,7 @@ type = "hot"; }; - audio_crit: audio_crit { + audio_crit: audio-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -4312,7 +4317,7 @@ type = "hot"; }; - ddr_crit: ddr_crit { + ddr_crit: ddr-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -4333,7 +4338,7 @@ type = "hot"; }; - q6_hvx_crit: q6_hvx_crit { + q6_hvx_crit: q6-hvx-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -4354,7 +4359,7 @@ type = "hot"; }; - camera_crit: camera_crit { + camera_crit: camera-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -4375,7 +4380,7 @@ type = "hot"; }; - mdm_crit: mdm_crit { + mdm_crit: mdm-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -4396,7 +4401,7 @@ type = "hot"; }; - mdm_dsp_crit: mdm_dsp_crit { + mdm_dsp_crit: mdm-dsp-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -4417,7 +4422,7 @@ type = "hot"; }; - npu_crit: npu_crit { + npu_crit: npu-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -4438,7 +4443,7 @@ type = "hot"; }; - video_crit: video_crit { + video_crit: video-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi index af685bc35e10..69e7aa7b2f6c 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi @@ -33,10 +33,23 @@ }; dai-link@1 { - link-name = "ALC5682"; + link-name = "DisplayPort"; reg = <1>; cpu { + sound-dai = <&lpass_cpu LPASS_DP_RX>; + }; + + codec { + sound-dai = <&mdss_dp>; + }; + }; + + dai-link@2 { + link-name = "ALC5682"; + reg = <2>; + + cpu { sound-dai = <&lpass_cpu MI2S_PRIMARY>; }; @@ -92,6 +105,10 @@ hp_i2c: &i2c2 { reg = <MI2S_SECONDARY>; qcom,playback-sd-lines = <0>; }; + + dai-link@5 { + reg = <LPASS_DP_RX>; + }; }; /* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */ diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi index ae2552094cda..020ef666e35f 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi @@ -32,12 +32,8 @@ "TX SWR_DMIC6", "DMIC7_OUTPUT", "TX SWR_DMIC7", "DMIC8_OUTPUT"; - qcom,msm-mbhc-hphl-swh = <1>; - qcom,msm-mbhc-gnd-swh = <1>; - #address-cells = <1>; #size-cells = <0>; - #sound-dai-cells = <0>; dai-link@0 { link-name = "MAX98360A"; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd-pro.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd-pro.dts new file mode 100644 index 000000000000..4ee5f0b0a5de --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd-pro.dts @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * sc7280 CRD 3+ Pro board device tree source + * + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#include "sc7280-herobrine-crd.dts" +#include "sc7280-herobrine-pro-sku.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. sc7280 CRD Pro platform (rev5+)"; + compatible = "google,zoglin-sku1536", "google,hoglin-sku1536", "qcom,sc7280"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker.dtsi index 3d639c70a06e..0add7a2a099c 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker.dtsi @@ -55,6 +55,7 @@ ts_i2c: &i2c13 { reset-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>; vdd-supply = <&ts_avdd>; + mainboard-vddio-supply = <&ts_avccio>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi index ad66e5e9db4e..95505549adcc 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi @@ -17,16 +17,44 @@ reg = <0x0 0x9c700000 0x0 0x200000>; no-map; }; + + mdata_mem: mpss-metadata { + alloc-ranges = <0x0 0xa0000000 0x0 0x20000000>; + size = <0x0 0x4000>; + no-map; + }; }; }; +&ipa { + qcom,gsi-loader = "modem"; + status = "okay"; +}; + &remoteproc_mpss { compatible = "qcom,sc7280-mss-pil"; + + clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, + <&gcc GCC_MSS_OFFLINE_AXI_CLK>, + <&gcc GCC_MSS_SNOC_AXI_CLK>, + <&rpmhcc RPMH_PKA_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "offline", "snoc_axi", "pka", "xo"; + iommus = <&apps_smmu 0x124 0x0>, <&apps_smmu 0x488 0x7>; interconnects = <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>; - memory-region = <&mba_mem>, <&mpss_mem>; + memory-region = <&mba_mem>, <&mpss_mem>, <&mdata_mem>; firmware-name = "qcom/sc7280-herobrine/modem/mba.mbn", "qcom/sc7280-herobrine/modem/qdsp6sw.mbn"; + + resets = <&aoss_reset AOSS_CC_MSS_RESTART>, + <&pdc_reset PDC_MODEM_SYNC_RESET>; + reset-names = "mss_restart", "pdc_reset"; + + qcom,halt-regs = <&tcsr_1 0x3000 0x5000 0x8000 0x13000>; + qcom,ext-regs = <&tcsr_2 0x10000 0x10004 &tcsr_1 0x6004 0x6008>; + qcom,qaccept-regs = <&tcsr_1 0x3030 0x3040 0x3020>; + status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-nvme-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-nvme-sku.dtsi new file mode 100644 index 000000000000..1aed02297f44 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-nvme-sku.dtsi @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Herobrine dts fragment for NVMe SKUs + * + * Copyright 2022 Google LLC. + */ + +&pcie1 { + status = "okay"; +}; + +&pcie1_phy { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-pro-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-pro-sku.dtsi new file mode 100644 index 000000000000..fb4bbe8aeda0 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-pro-sku.dtsi @@ -0,0 +1,8 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Google Herobrine dts fragment for PRO SKUs + * + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/delete-node/ &vreg_s9c_0p676; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager.dtsi index 17553e0fd6fd..818d4046d2c7 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager.dtsi @@ -55,6 +55,7 @@ ts_i2c: &i2c13 { reset-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>; vcc33-supply = <&ts_avdd>; + vccio-supply = <&ts_avccio>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie-nvme-lte.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie-nvme-lte.dts new file mode 100644 index 000000000000..e1fcacdccd51 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie-nvme-lte.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Zombie board device tree source + * + * Copyright 2022 Google LLC. + */ + +/dts-v1/; + +#include "sc7280-herobrine-zombie.dtsi" +#include "sc7280-herobrine-lte-sku.dtsi" +#include "sc7280-herobrine-nvme-sku.dtsi" + +/ { + model = "Google Zombie with LTE and NVMe"; + compatible = "google,zombie-sku514", "qcom,sc7280"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie-nvme.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie-nvme.dts new file mode 100644 index 000000000000..e3d52c560363 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie-nvme.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Zombie board device tree source + * + * Copyright 2022 Google LLC. + */ + +/dts-v1/; + +#include "sc7280-herobrine-zombie.dtsi" +#include "sc7280-herobrine-wifi-sku.dtsi" +#include "sc7280-herobrine-nvme-sku.dtsi" + +/ { + model = "Google Zombie with NVMe"; + compatible = "google,zombie-sku2","google,zombie-sku3","google,zombie-sku515", "qcom,sc7280"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dtsi index 7fc0b6bfc0d6..a4fde22e3355 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dtsi @@ -60,19 +60,9 @@ ap_tp_i2c: &i2c0 { status = "okay"; }; -/* For nvme */ -&pcie1 { - status = "okay"; -}; - -/* For nvme */ -&pcie1_phy { - status = "okay"; -}; - -&pm8350c_pwm_backlight{ - /* Set the PWM period to 200 microseconds (5kHz duty cycle) */ - pwms = <&pm8350c_pwm 3 200000>; +&pm8350c_pwm_backlight { + /* Set the PWM period to 320 microseconds (3.125kHz frequency) */ + pwms = <&pm8350c_pwm 3 320000>; }; &pwmleds { diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi index 27f479ff9d80..b6137816f2f3 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi @@ -108,6 +108,24 @@ pinctrl-names = "default"; pinctrl-0 = <&en_pp3300_dx_edp>; + regulator-enable-ramp-delay = <3000>; + + /* + * eDP panel specs nearly always have a spec that says you + * shouldn't turn them off an on again without waiting 500ms. + * Add this as a board constraint since this rail is shared + * between the panel and touchscreen. + */ + off-on-delay-us = <500000>; + + /* + * Stat the regulator on. This has the advantage of starting + * the slow process of powering the panel on as soon as we + * probe the regulator. It also avoids tripping the + * off-on-delay immediately on every bootup. + */ + regulator-boot-on; + vin-supply = <&pp3300_z1>; }; @@ -442,7 +460,11 @@ ap_i2c_tpm: &i2c14 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&dp_hot_plug_det>; +}; + +&mdss_dp_out { data-lanes = <0 1>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; }; &mdss_mdp { diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi index f7efb9966afd..8b5293e7fd2a 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi @@ -19,6 +19,7 @@ aliases { bluetooth0 = &bluetooth; serial1 = &uart7; + wifi0 = &wifi; }; max98360a: audio-codec-0 { @@ -112,12 +113,8 @@ "TX SWR_DMIC6", "DMIC7_OUTPUT", "TX SWR_DMIC7", "DMIC8_OUTPUT"; - qcom,msm-mbhc-hphl-swh = <1>; - qcom,msm-mbhc-gnd-swh = <1>; - #address-cells = <1>; #size-cells = <0>; - #sound-dai-cells = <0>; dai-link@0 { link-name = "MAX98360A"; @@ -376,11 +373,6 @@ status = "okay"; }; -&ipa { - status = "okay"; - modem-init; -}; - &lpass_cpu { status = "okay"; @@ -736,6 +728,7 @@ &tlmm { amp_en: amp-en-state { pins = "gpio63"; + function = "gpio"; bias-pull-down; drive-strength = <2>; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi index df49564ae6dc..88204f794ccb 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi @@ -230,9 +230,15 @@ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; + /* + * The initial design of this regulator was to use it as 3.3V, + * but due to later changes in design it was changed to 1.8V. + * The original name is kept due to same schematic. + */ + ts_avccio: vreg_l3c_3p0: ldo3 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <3540000>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; @@ -336,11 +342,6 @@ /* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ -&ipa { - status = "okay"; - modem-init; -}; - &lpass_va_macro { vdd-micb-supply = <&vreg_bob>; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index 0adf13399e64..bdcb74925313 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -166,7 +166,7 @@ CPU0: cpu@0 { device_type = "cpu"; - compatible = "arm,kryo"; + compatible = "qcom,kryo"; reg = <0x0 0x0>; enable-method = "psci"; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 @@ -180,16 +180,18 @@ #cooling-cells = <2>; L2_0: l2-cache { compatible = "cache"; + cache-level = <2>; next-level-cache = <&L3_0>; L3_0: l3-cache { compatible = "cache"; + cache-level = <3>; }; }; }; CPU1: cpu@100 { device_type = "cpu"; - compatible = "arm,kryo"; + compatible = "qcom,kryo"; reg = <0x0 0x100>; enable-method = "psci"; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 @@ -203,13 +205,14 @@ #cooling-cells = <2>; L2_100: l2-cache { compatible = "cache"; + cache-level = <2>; next-level-cache = <&L3_0>; }; }; CPU2: cpu@200 { device_type = "cpu"; - compatible = "arm,kryo"; + compatible = "qcom,kryo"; reg = <0x0 0x200>; enable-method = "psci"; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 @@ -223,13 +226,14 @@ #cooling-cells = <2>; L2_200: l2-cache { compatible = "cache"; + cache-level = <2>; next-level-cache = <&L3_0>; }; }; CPU3: cpu@300 { device_type = "cpu"; - compatible = "arm,kryo"; + compatible = "qcom,kryo"; reg = <0x0 0x300>; enable-method = "psci"; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 @@ -243,13 +247,14 @@ #cooling-cells = <2>; L2_300: l2-cache { compatible = "cache"; + cache-level = <2>; next-level-cache = <&L3_0>; }; }; CPU4: cpu@400 { device_type = "cpu"; - compatible = "arm,kryo"; + compatible = "qcom,kryo"; reg = <0x0 0x400>; enable-method = "psci"; cpu-idle-states = <&BIG_CPU_SLEEP_0 @@ -263,13 +268,14 @@ #cooling-cells = <2>; L2_400: l2-cache { compatible = "cache"; + cache-level = <2>; next-level-cache = <&L3_0>; }; }; CPU5: cpu@500 { device_type = "cpu"; - compatible = "arm,kryo"; + compatible = "qcom,kryo"; reg = <0x0 0x500>; enable-method = "psci"; cpu-idle-states = <&BIG_CPU_SLEEP_0 @@ -283,13 +289,14 @@ #cooling-cells = <2>; L2_500: l2-cache { compatible = "cache"; + cache-level = <2>; next-level-cache = <&L3_0>; }; }; CPU6: cpu@600 { device_type = "cpu"; - compatible = "arm,kryo"; + compatible = "qcom,kryo"; reg = <0x0 0x600>; enable-method = "psci"; cpu-idle-states = <&BIG_CPU_SLEEP_0 @@ -303,13 +310,14 @@ #cooling-cells = <2>; L2_600: l2-cache { compatible = "cache"; + cache-level = <2>; next-level-cache = <&L3_0>; }; }; CPU7: cpu@700 { device_type = "cpu"; - compatible = "arm,kryo"; + compatible = "qcom,kryo"; reg = <0x0 0x700>; enable-method = "psci"; cpu-idle-states = <&BIG_CPU_SLEEP_0 @@ -323,6 +331,7 @@ #cooling-cells = <2>; L2_700: l2-cache { compatible = "cache"; + cache-level = <2>; next-level-cache = <&L3_0>; }; }; @@ -2171,9 +2180,9 @@ iommus = <&apps_smmu 0x480 0x0>, <&apps_smmu 0x482 0x0>; - reg = <0 0x1e40000 0 0x8000>, - <0 0x1e50000 0 0x4ad0>, - <0 0x1e04000 0 0x23000>; + reg = <0 0x01e40000 0 0x8000>, + <0 0x01e50000 0 0x4ad0>, + <0 0x01e04000 0 0x23000>; reg-names = "ipa-reg", "ipa-shared", "gsi"; @@ -2455,7 +2464,7 @@ lpass_hm: clock-controller@3c00000 { compatible = "qcom,sc7280-lpasshm"; - reg = <0 0x3c00000 0 0x28>; + reg = <0 0x03c00000 0 0x28>; clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "bi_tcxo"; #clock-cells = <1>; @@ -2661,6 +2670,12 @@ #power-domain-cells = <1>; }; + dma@117f000 { + compatible = "qcom,sc7280-dcc", "qcom,dcc"; + reg = <0x0 0x0117f000 0x0 0x1000>, + <0x0 0x01112000 0x0 0x6000>; + }; + adreno_smmu: iommu@3da0000 { compatible = "qcom,sc7280-smmu-500", "qcom,adreno-smmu", "arm,mmu-500"; reg = <0 0x03da0000 0 0x20000>; @@ -2711,12 +2726,8 @@ interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack", "shutdown-ack"; - clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, - <&gcc GCC_MSS_OFFLINE_AXI_CLK>, - <&gcc GCC_MSS_SNOC_AXI_CLK>, - <&rpmhcc RPMH_PKA_CLK>, - <&rpmhcc RPMH_CXO_CLK>; - clock-names = "iface", "offline", "snoc_axi", "pka", "xo"; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; power-domains = <&rpmhpd SC7280_CX>, <&rpmhpd SC7280_MSS>; @@ -2729,14 +2740,6 @@ qcom,smem-states = <&modem_smp2p_out 0>; qcom,smem-state-names = "stop"; - resets = <&aoss_reset AOSS_CC_MSS_RESTART>, - <&pdc_reset PDC_MODEM_SYNC_RESET>; - reset-names = "mss_restart", "pdc_reset"; - - qcom,halt-regs = <&tcsr_1 0x3000 0x5000 0x8000 0x13000>; - qcom,ext-regs = <&tcsr_2 0x10000 0x10004 &tcsr_1 0x6004 0x6008>; - qcom,qaccept-regs = <&tcsr_1 0x3030 0x3040 0x3020>; - status = "disabled"; glink-edge { @@ -3489,7 +3492,7 @@ pmu@9091000 { compatible = "qcom,sc7280-llcc-bwmon"; - reg = <0 0x9091000 0 0x1000>; + reg = <0 0x09091000 0 0x1000>; interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; @@ -3571,7 +3574,7 @@ }; gem_noc: interconnect@9100000 { - reg = <0 0x9100000 0 0xe2200>; + reg = <0 0x09100000 0 0xe2200>; compatible = "qcom,sc7280-gem-noc"; #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; @@ -3586,8 +3589,8 @@ eud: eud@88e0000 { compatible = "qcom,sc7280-eud","qcom,eud"; - reg = <0 0x88e0000 0 0x2000>, - <0 0x88e2000 0 0x1000>; + reg = <0 0x088e0000 0 0x2000>, + <0 0x088e2000 0 0x1000>; interrupts-extended = <&pdc 11 IRQ_TYPE_LEVEL_HIGH>; ports { port@0 { @@ -3750,7 +3753,7 @@ videocc: clock-controller@aaf0000 { compatible = "qcom,sc7280-videocc"; - reg = <0 0xaaf0000 0 0x10000>; + reg = <0 0x0aaf0000 0 0x10000>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>; clock-names = "bi_tcxo", "bi_tcxo_ao"; @@ -3773,7 +3776,7 @@ dispcc: clock-controller@af00000 { compatible = "qcom,sc7280-dispcc"; - reg = <0 0xaf00000 0 0x20000>; + reg = <0 0x0af00000 0 0x20000>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_DISP_GPLL0_CLK_SRC>, <&mdss_dsi_phy 0>, @@ -3906,7 +3909,8 @@ }; mdss_dsi: dsi@ae94000 { - compatible = "qcom,mdss-dsi-ctrl"; + compatible = "qcom,sc7280-dsi-ctrl", + "qcom,mdss-dsi-ctrl"; reg = <0 0x0ae94000 0 0x400>; reg-names = "dsi_ctrl"; @@ -4001,10 +4005,10 @@ pinctrl-names = "default"; pinctrl-0 = <&edp_hot_plug_det>; - reg = <0 0xaea0000 0 0x200>, - <0 0xaea0200 0 0x200>, - <0 0xaea0400 0 0xc00>, - <0 0xaea1000 0 0x400>; + reg = <0 0x0aea0000 0 0x200>, + <0 0x0aea0200 0 0x200>, + <0 0x0aea0400 0 0xc00>, + <0 0x0aea1000 0 0x400>; interrupt-parent = <&mdss>; interrupts = <14>; @@ -4076,10 +4080,10 @@ mdss_edp_phy: phy@aec2a00 { compatible = "qcom,sc7280-edp-phy"; - reg = <0 0xaec2a00 0 0x19c>, - <0 0xaec2200 0 0xa0>, - <0 0xaec2600 0 0xa0>, - <0 0xaec2000 0 0x1c0>; + reg = <0 0x0aec2a00 0 0x19c>, + <0 0x0aec2200 0 0xa0>, + <0 0x0aec2600 0 0xa0>, + <0 0x0aec2000 0 0x1c0>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_EDP_CLKREF_EN>; @@ -4095,11 +4099,11 @@ mdss_dp: displayport-controller@ae90000 { compatible = "qcom,sc7280-dp"; - reg = <0 0xae90000 0 0x200>, - <0 0xae90200 0 0x200>, - <0 0xae90400 0 0xc00>, - <0 0xae91000 0 0x400>, - <0 0xae91400 0 0x400>; + reg = <0 0x0ae90000 0 0x200>, + <0 0x0ae90200 0 0x200>, + <0 0x0ae90400 0 0xc00>, + <0 0x0ae91000 0 0x400>, + <0 0x0ae91400 0 0x400>; interrupt-parent = <&mdss>; interrupts = <12>; @@ -4140,7 +4144,7 @@ port@1 { reg = <1>; - dp_out: endpoint { }; + mdss_dp_out: endpoint { }; }; }; @@ -4217,7 +4221,7 @@ #reset-cells = <1>; }; - aoss_qmp: power-controller@c300000 { + aoss_qmp: power-management@c300000 { compatible = "qcom,sc7280-aoss-qmp", "qcom,aoss-qmp"; reg = <0 0x0c300000 0 0x400>; interrupts-extended = <&ipcc IPCC_CLIENT_AOP @@ -4246,8 +4250,8 @@ interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; qcom,ee = <0>; qcom,channel = <0>; - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <0>; interrupt-controller; #interrupt-cells = <4>; }; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts index 551768f97729..98a0f1f9f01e 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts @@ -17,10 +17,12 @@ compatible = "qcom,sc8280xp-crd", "qcom,sc8280xp"; aliases { - serial0 = &qup2_uart17; + i2c4 = &i2c4; + i2c21 = &i2c21; + serial0 = &uart17; }; - backlight { + backlight: backlight { compatible = "pwm-backlight"; pwms = <&pmc8280c_lpg 3 1000000>; enable-gpios = <&pmc8280_1_gpios 8 GPIO_ACTIVE_HIGH>; @@ -34,6 +36,100 @@ stdout-path = "serial0:115200n8"; }; + pmic-glink { + compatible = "qcom,sc8280xp-pmic-glink", "qcom,pmic-glink"; + + #address-cells = <1>; + #size-cells = <0>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_con0_hs: endpoint { + remote-endpoint = <&usb_0_role_switch>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_con0_ss: endpoint { + remote-endpoint = <&mdss0_dp0_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_con0_sbu: endpoint { + remote-endpoint = <&usb0_sbu_mux>; + }; + }; + }; + }; + + connector@1 { + compatible = "usb-c-connector"; + reg = <1>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + + pmic_glink_con1_hs: endpoint { + remote-endpoint = <&usb_1_role_switch>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_con1_ss: endpoint { + remote-endpoint = <&mdss0_dp1_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_con1_sbu: endpoint { + remote-endpoint = <&usb1_sbu_mux>; + }; + }; + }; + }; + }; + + vreg_edp_3p3: regulator-edp-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_EDP_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&edp_reg_en>; + + regulator-boot-on; + }; + vreg_edp_bl: regulator-edp-bl { compatible = "regulator-fixed"; @@ -112,10 +208,59 @@ regulator-boot-on; }; + + reserved-memory { + linux,cma { + compatible = "shared-dma-pool"; + size = <0x0 0x8000000>; + reusable; + linux,cma-default; + }; + }; + + usb0-sbu-mux { + compatible = "pericom,pi3usb102", "gpio-sbu-mux"; + + enable-gpios = <&tlmm 101 GPIO_ACTIVE_LOW>; + select-gpios = <&tlmm 164 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&usb0_sbu_default>; + + mode-switch; + orientation-switch; + svid = /bits/ 16 <0xff01>; + + port { + usb0_sbu_mux: endpoint { + remote-endpoint = <&pmic_glink_con0_sbu>; + }; + }; + }; + + usb1-sbu-mux { + compatible = "pericom,pi3usb102", "gpio-sbu-mux"; + + enable-gpios = <&tlmm 48 GPIO_ACTIVE_LOW>; + select-gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&usb1_sbu_default>; + + mode-switch; + orientation-switch; + svid = /bits/ 16 <0xff01>; + + port { + usb1_sbu_mux: endpoint { + remote-endpoint = <&pmic_glink_con1_sbu>; + }; + }; + }; }; &apps_rsc { - pmc8280-1-rpmh-regulators { + regulators-0 { compatible = "qcom,pm8350-rpmh-regulators"; qcom,pmic-id = "b"; @@ -134,7 +279,6 @@ regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-boot-on; - regulator-always-on; }; vreg_l4b: ldo4 { @@ -153,7 +297,7 @@ }; }; - pmc8280c-rpmh-regulators { + regulators-1 { compatible = "qcom,pm8350c-rpmh-regulators"; qcom,pmic-id = "c"; @@ -182,7 +326,7 @@ }; }; - pmc8280-2-rpmh-regulators { + regulators-2 { compatible = "qcom,pm8350-rpmh-regulators"; qcom,pmic-id = "d"; @@ -228,80 +372,79 @@ }; }; -&pcie2a { - perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>; - wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>; - - vddpe-3v3-supply = <&vreg_nvme>; - - pinctrl-names = "default"; - pinctrl-0 = <&pcie2a_default>; - +&dispcc0 { status = "okay"; }; -&pcie2a_phy { - vdda-phy-supply = <&vreg_l6d>; - vdda-pll-supply = <&vreg_l4d>; - +&mdss0 { status = "okay"; }; -&pcie3a { - perst-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>; - wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>; - - vddpe-3v3-supply = <&vreg_wwan>; - - pinctrl-names = "default"; - pinctrl-0 = <&pcie3a_default>; - +&mdss0_dp0 { status = "okay"; }; -&pcie3a_phy { - vdda-phy-supply = <&vreg_l6d>; - vdda-pll-supply = <&vreg_l4d>; +&mdss0_dp0_out { + data-lanes = <0 1>; + remote-endpoint = <&pmic_glink_con0_ss>; +}; +&mdss0_dp1 { status = "okay"; }; -&pcie4 { - perst-gpios = <&tlmm 141 GPIO_ACTIVE_LOW>; - wake-gpios = <&tlmm 139 GPIO_ACTIVE_LOW>; +&mdss0_dp1_out { + data-lanes = <0 1>; + remote-endpoint = <&pmic_glink_con1_ss>; +}; - vddpe-3v3-supply = <&vreg_wlan>; +&mdss0_dp3 { + compatible = "qcom,sc8280xp-edp"; + /delete-property/ #sound-dai-cells; - pinctrl-names = "default"; - pinctrl-0 = <&pcie4_default>; + data-lanes = <0 1 2 3>; status = "okay"; -}; -&pcie4_phy { - vdda-phy-supply = <&vreg_l6d>; - vdda-pll-supply = <&vreg_l4d>; + aux-bus { + panel { + compatible = "edp-panel"; + power-supply = <&vreg_edp_3p3>; - status = "okay"; -}; + backlight = <&backlight>; -&pmc8280c_lpg { - status = "okay"; -}; + ports { + port { + edp_panel_in: endpoint { + remote-endpoint = <&mdss0_dp3_out>; + }; + }; + }; + }; + }; -&pmk8280_pon_pwrkey { - status = "okay"; + ports { + port@1 { + reg = <1>; + mdss0_dp3_out: endpoint { + remote-endpoint = <&edp_panel_in>; + }; + }; + }; }; -&qup0 { +&mdss0_dp3_phy { + vdda-phy-supply = <&vreg_l6b>; + vdda-pll-supply = <&vreg_l3b>; + status = "okay"; }; -&qup0_i2c4 { +&i2c4 { clock-frequency = <400000>; pinctrl-names = "default"; - pinctrl-0 = <&qup0_i2c4_default>; + pinctrl-0 = <&i2c4_default>; status = "okay"; @@ -318,19 +461,11 @@ }; }; -&qup1 { - status = "okay"; -}; - -&qup2 { - status = "okay"; -}; - -&qup2_i2c5 { +&i2c21 { clock-frequency = <400000>; pinctrl-names = "default"; - pinctrl-0 = <&qup2_i2c5_default>; + pinctrl-0 = <&i2c21_default>; status = "okay"; @@ -363,12 +498,83 @@ }; }; -&qup2_uart17 { - compatible = "qcom,geni-debug-uart"; +&pcie2a { + perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>; + + vddpe-3v3-supply = <&vreg_nvme>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie2a_default>; status = "okay"; }; +&pcie2a_phy { + vdda-phy-supply = <&vreg_l6d>; + vdda-pll-supply = <&vreg_l4d>; + + status = "okay"; +}; + +&pcie3a { + perst-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>; + + vddpe-3v3-supply = <&vreg_wwan>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie3a_default>; + + status = "okay"; +}; + +&pcie3a_phy { + vdda-phy-supply = <&vreg_l6d>; + vdda-pll-supply = <&vreg_l4d>; + + status = "okay"; +}; + +&pcie4 { + perst-gpios = <&tlmm 141 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 139 GPIO_ACTIVE_LOW>; + + vddpe-3v3-supply = <&vreg_wlan>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie4_default>; + + status = "okay"; +}; + +&pcie4_phy { + vdda-phy-supply = <&vreg_l6d>; + vdda-pll-supply = <&vreg_l4d>; + + status = "okay"; +}; + +&pmc8280c_lpg { + status = "okay"; +}; + +&pmk8280_pon_pwrkey { + status = "okay"; +}; + +&qup0 { + status = "okay"; +}; + +&qup1 { + status = "okay"; +}; + +&qup2 { + status = "okay"; +}; + &remoteproc_adsp { firmware-name = "qcom/sc8280xp/qcadsp8280.mbn"; @@ -381,6 +587,12 @@ status = "okay"; }; +&uart17 { + compatible = "qcom,geni-debug-uart"; + + status = "okay"; +}; + &ufs_mem_hc { reset-gpios = <&tlmm 228 GPIO_ACTIVE_LOW>; @@ -404,7 +616,6 @@ }; &usb_0_dwc3 { - /* TODO: Define USB-C connector properly */ dr_mode = "host"; }; @@ -423,12 +634,15 @@ status = "okay"; }; +&usb_0_role_switch { + remote-endpoint = <&pmic_glink_con0_hs>; +}; + &usb_1 { status = "okay"; }; &usb_1_dwc3 { - /* TODO: Define USB-C connector properly */ dr_mode = "host"; }; @@ -447,6 +661,10 @@ status = "okay"; }; +&usb_1_role_switch { + remote-endpoint = <&pmic_glink_con1_hs>; +}; + &xo_board_clk { clock-frequency = <38400000>; }; @@ -494,6 +712,27 @@ &tlmm { gpio-reserved-ranges = <74 6>, <83 4>, <125 2>, <128 2>, <154 7>; + edp_reg_en: edp-reg-en-state { + pins = "gpio25"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + i2c4_default: i2c4-default-state { + pins = "gpio171", "gpio172"; + function = "qup4"; + drive-strength = <16>; + bias-disable; + }; + + i2c21_default: i2c21-default-state { + pins = "gpio81", "gpio82"; + function = "qup21"; + drive-strength = <16>; + bias-disable; + }; + kybd_default: kybd-default-state { disable-pins { pins = "gpio102"; @@ -590,22 +829,6 @@ }; }; - qup0_i2c4_default: qup0-i2c4-default-state { - pins = "gpio171", "gpio172"; - function = "qup4"; - - bias-disable; - drive-strength = <16>; - }; - - qup2_i2c5_default: qup2-i2c5-default-state { - pins = "gpio81", "gpio82"; - function = "qup21"; - - bias-disable; - drive-strength = <16>; - }; - tpad_default: tpad-default-state { int-n-pins { pins = "gpio182"; @@ -628,4 +851,54 @@ drive-strength = <16>; }; }; + + usb0_sbu_default: usb0-sbu-state { + oe-n-pins { + pins = "gpio101"; + function = "gpio"; + bias-disable; + drive-strengh = <16>; + output-high; + }; + + sel-pins { + pins = "gpio164"; + function = "gpio"; + bias-disable; + drive-strength = <16>; + }; + + mode-pins { + pins = "gpio167"; + function = "gpio"; + bias-disable; + drive-strength = <16>; + output-high; + }; + }; + + usb1_sbu_default: usb1-sbu-state { + oe-n-pins { + pins = "gpio48"; + function = "gpio"; + bias-disable; + drive-strengh = <16>; + output-high; + }; + + sel-pins { + pins = "gpio47"; + function = "gpio"; + bias-disable; + drive-strength = <16>; + }; + + mode-pins { + pins = "gpio50"; + function = "gpio"; + bias-disable; + drive-strength = <16>; + output-high; + }; + }; }; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts index 568c6be1ceaa..98e71b933437 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts @@ -21,7 +21,38 @@ model = "Lenovo ThinkPad X13s"; compatible = "lenovo,thinkpad-x13s", "qcom,sc8280xp"; - backlight { + aliases { + i2c4 = &i2c4; + i2c21 = &i2c21; + }; + + wcd938x: audio-codec { + compatible = "qcom,wcd9380-codec"; + + pinctrl-names = "default"; + pinctrl-0 = <&wcd_default>; + + reset-gpios = <&tlmm 106 GPIO_ACTIVE_LOW>; + + vdd-buck-supply = <&vreg_s10b>; + vdd-rxtx-supply = <&vreg_s10b>; + vdd-io-supply = <&vreg_s10b>; + vdd-mic-bias-supply = <&vreg_bob>; + + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + qcom,rx-device = <&wcd_rx>; + qcom,tx-device = <&wcd_tx>; + + #sound-dai-cells = <1>; + }; + + backlight: backlight { compatible = "pwm-backlight"; pwms = <&pmc8280c_lpg 3 1000000>; enable-gpios = <&pmc8280_1_gpios 8 GPIO_ACTIVE_HIGH>; @@ -31,65 +62,113 @@ pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>; }; - thermal-zones { - skin-temp-thermal { - polling-delay-passive = <250>; - polling-delay = <0>; - thermal-sensors = <&pmk8280_adc_tm 5>; + gpio-keys { + compatible = "gpio-keys"; - trips { - skin_temp_alert0: trip-point0 { - temperature = <55000>; - hysteresis = <1000>; - type = "passive"; + pinctrl-names = "default"; + pinctrl-0 = <&hall_int_n_default>; + + switch-lid { + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + wakeup-source; + wakeup-event-action = <EV_ACT_DEASSERTED>; + }; + }; + + pmic-glink { + compatible = "qcom,sc8280xp-pmic-glink", "qcom,pmic-glink"; + + #address-cells = <1>; + #size-cells = <0>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_con0_hs: endpoint { + remote-endpoint = <&usb_0_role_switch>; + }; }; - skin_temp_alert1: trip-point1 { - temperature = <58000>; - hysteresis = <1000>; - type = "passive"; + port@1 { + reg = <1>; + + pmic_glink_con0_ss: endpoint { + remote-endpoint = <&mdss0_dp0_out>; + }; }; - skin-temp-crit { - temperature = <73000>; - hysteresis = <1000>; - type = "critical"; + port@2 { + reg = <2>; + + pmic_glink_con0_sbu: endpoint { + remote-endpoint = <&usb0_sbu_mux>; + }; }; }; + }; - cooling-maps { - map0 { - trip = <&skin_temp_alert0>; - cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + connector@1 { + compatible = "usb-c-connector"; + reg = <1>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + + pmic_glink_con1_hs: endpoint { + remote-endpoint = <&usb_1_role_switch>; + }; }; - map1 { - trip = <&skin_temp_alert1>; - cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + port@1 { + reg = <1>; + + pmic_glink_con1_ss: endpoint { + remote-endpoint = <&mdss0_dp1_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_con1_sbu: endpoint { + remote-endpoint = <&usb1_sbu_mux>; + }; }; }; }; }; - gpio-keys { - compatible = "gpio-keys"; + vreg_edp_3p3: regulator-edp-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VCC3LCD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>; + enable-active-high; pinctrl-names = "default"; - pinctrl-0 = <&hall_int_n_default>; + pinctrl-0 = <&edp_reg_en>; - switch-lid { - gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; - linux,input-type = <EV_SW>; - linux,code = <SW_LID>; - wakeup-source; - wakeup-event-action = <EV_ACT_DEASSERTED>; - }; + regulator-boot-on; }; vreg_edp_bl: regulator-edp-bl { @@ -141,6 +220,16 @@ regulator-boot-on; }; + vreg_vph_pwr: regulator-vph-pwr { + compatible = "regulator-fixed"; + + regulator-name = "VPH_VCC3R9"; + regulator-min-microvolt = <3900000>; + regulator-max-microvolt = <3900000>; + + regulator-always-on; + }; + vreg_wlan: regulator-wlan { compatible = "regulator-fixed"; @@ -172,15 +261,117 @@ regulator-boot-on; }; + + reserved-memory { + linux,cma { + compatible = "shared-dma-pool"; + size = <0x0 0x8000000>; + reusable; + linux,cma-default; + }; + }; + + thermal-zones { + skin-temp-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + thermal-sensors = <&pmk8280_adc_tm 5>; + + trips { + skin_temp_alert0: trip-point0 { + temperature = <55000>; + hysteresis = <1000>; + type = "passive"; + }; + + skin_temp_alert1: trip-point1 { + temperature = <58000>; + hysteresis = <1000>; + type = "passive"; + }; + + skin-temp-crit { + temperature = <73000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&skin_temp_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + + map1 { + trip = <&skin_temp_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + + usb0-sbu-mux { + compatible = "pericom,pi3usb102", "gpio-sbu-mux"; + + enable-gpios = <&tlmm 101 GPIO_ACTIVE_LOW>; + select-gpios = <&tlmm 164 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&usb0_sbu_default>; + + mode-switch; + orientation-switch; + svid = /bits/ 16 <0xff01>; + + port { + usb0_sbu_mux: endpoint { + remote-endpoint = <&pmic_glink_con0_sbu>; + }; + }; + }; + + usb1-sbu-mux { + compatible = "pericom,pi3usb102", "gpio-sbu-mux"; + + enable-gpios = <&tlmm 48 GPIO_ACTIVE_LOW>; + select-gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&usb1_sbu_default>; + + mode-switch; + orientation-switch; + svid = /bits/ 16 <0xff01>; + + port { + usb1_sbu_mux: endpoint { + remote-endpoint = <&pmic_glink_con1_sbu>; + }; + }; + }; }; &apps_rsc { - pmc8280-1-rpmh-regulators { + regulators-0 { compatible = "qcom,pm8350-rpmh-regulators"; qcom,pmic-id = "b"; vdd-l3-l5-supply = <&vreg_s11b>; + vreg_s10b: smps10 { + regulator-name = "vreg_s10b"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + vreg_s11b: smps11 { regulator-name = "vreg_s11b"; regulator-min-microvolt = <1272000>; @@ -188,6 +379,13 @@ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; + vreg_s12b: smps12 { + regulator-name = "vreg_s12b"; + regulator-min-microvolt = <984000>; + regulator-max-microvolt = <984000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + vreg_l3b: ldo3 { regulator-name = "vreg_l3b"; regulator-min-microvolt = <1200000>; @@ -209,13 +407,13 @@ regulator-max-microvolt = <880000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-boot-on; - regulator-always-on; /* FIXME: VDD_A_EDP_0_0P9 */ }; }; - pmc8280c-rpmh-regulators { + regulators-1 { compatible = "qcom,pm8350c-rpmh-regulators"; qcom,pmic-id = "c"; + vdd-bob-supply = <&vreg_vph_pwr>; vreg_l1c: ldo1 { regulator-name = "vreg_l1c"; @@ -237,9 +435,16 @@ regulator-max-microvolt = <3072000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; + + vreg_bob: bob { + regulator-name = "vreg_bob"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + }; }; - pmc8280-2-rpmh-regulators { + regulators-2 { compatible = "qcom,pm8350-rpmh-regulators"; qcom,pmic-id = "d"; @@ -282,6 +487,148 @@ }; }; +&dispcc0 { + status = "okay"; +}; + +&mdss0 { + status = "okay"; +}; + +&mdss0_dp0 { + status = "okay"; +}; + +&mdss0_dp0_out { + data-lanes = <0 1>; + remote-endpoint = <&pmic_glink_con0_ss>; +}; + +&mdss0_dp1 { + status = "okay"; +}; + +&mdss0_dp1_out { + data-lanes = <0 1>; + remote-endpoint = <&pmic_glink_con1_ss>; +}; + +&mdss0_dp3 { + compatible = "qcom,sc8280xp-edp"; + + data-lanes = <0 1 2 3>; + + status = "okay"; + + aux-bus { + panel { + compatible = "edp-panel"; + + backlight = <&backlight>; + power-supply = <&vreg_edp_3p3>; + + ports { + port { + edp_panel_in: endpoint { + remote-endpoint = <&mdss0_dp3_out>; + }; + }; + }; + }; + }; + + ports { + port@1 { + reg = <1>; + mdss0_dp3_out: endpoint { + remote-endpoint = <&edp_panel_in>; + }; + }; + }; +}; + +&mdss0_dp3_phy { + vdda-phy-supply = <&vreg_l6b>; + vdda-pll-supply = <&vreg_l3b>; + + status = "okay"; +}; + +&i2c4 { + clock-frequency = <400000>; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_default>; + + status = "okay"; + + /* FIXME: verify */ + touchscreen@10 { + compatible = "hid-over-i2c"; + reg = <0x10>; + + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vreg_misc_3p3>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts0_default>; + }; +}; + +&i2c21 { + clock-frequency = <400000>; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c21_default>; + + status = "okay"; + + touchpad@15 { + compatible = "hid-over-i2c"; + reg = <0x15>; + + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vreg_misc_3p3>; + + pinctrl-names = "default"; + pinctrl-0 = <&tpad_default>; + + wakeup-source; + + status = "disabled"; + }; + + touchpad@2c { + compatible = "hid-over-i2c"; + reg = <0x2c>; + + hid-descr-addr = <0x20>; + interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vreg_misc_3p3>; + + pinctrl-names = "default"; + pinctrl-0 = <&tpad_default>; + + wakeup-source; + }; + + keyboard@68 { + compatible = "hid-over-i2c"; + reg = <0x68>; + + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vreg_misc_3p3>; + + pinctrl-names = "default"; + pinctrl-0 = <&kybd_default>; + + wakeup-source; + }; +}; + &pcie2a { perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>; wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>; @@ -501,98 +848,157 @@ status = "okay"; }; -&qup0_i2c4 { - clock-frequency = <400000>; - - pinctrl-names = "default"; - pinctrl-0 = <&qup0_i2c4_default>; - +&qup1 { status = "okay"; +}; - /* FIXME: verify */ - touchscreen@10 { - compatible = "hid-over-i2c"; - reg = <0x10>; +&qup2 { + status = "okay"; +}; - hid-descr-addr = <0x1>; - interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>; - vdd-supply = <&vreg_misc_3p3>; +&remoteproc_adsp { + firmware-name = "qcom/sc8280xp/LENOVO/21BX/qcadsp8280.mbn"; - pinctrl-names = "default"; - pinctrl-0 = <&ts0_default>; - }; + status = "okay"; }; -&qup1 { +&remoteproc_nsp0 { + firmware-name = "qcom/sc8280xp/LENOVO/21BX/qccdsp8280.mbn"; + status = "okay"; }; -&qup2 { +&rxmacro { status = "okay"; }; -&qup2_i2c5 { - clock-frequency = <400000>; +&sound { + compatible = "qcom,sc8280xp-sndcard"; + model = "SC8280XP-LENOVO-X13S"; + audio-routing = + "SpkrLeft IN", "WSA_SPK1 OUT", + "SpkrRight IN", "WSA_SPK2 OUT", + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC2", "MIC BIAS2", + "VA DMIC0", "MIC BIAS1", + "VA DMIC1", "MIC BIAS1", + "VA DMIC2", "MIC BIAS3", + "TX DMIC0", "MIC BIAS1", + "TX DMIC1", "MIC BIAS2", + "TX DMIC2", "MIC BIAS3", + "TX SWR_ADC1", "ADC2_OUTPUT"; + + wcd-playback-dai-link { + link-name = "WCD Playback"; + cpu { + sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; + }; - pinctrl-names = "default"; - pinctrl-0 = <&qup2_i2c5_default>; + codec { + sound-dai = <&wcd938x 0>, <&swr1 0>, <&rxmacro 0>; + }; - status = "okay"; + platform { + sound-dai = <&q6apm>; + }; + }; - touchpad@15 { - compatible = "hid-over-i2c"; - reg = <0x15>; + wcd-capture-dai-link { + link-name = "WCD Capture"; + cpu { + sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; + }; - hid-descr-addr = <0x1>; - interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>; - vdd-supply = <&vreg_misc_3p3>; + codec { + sound-dai = <&wcd938x 1>, <&swr2 0>, <&txmacro 0>; + }; - pinctrl-names = "default"; - pinctrl-0 = <&tpad_default>; + platform { + sound-dai = <&q6apm>; + }; + }; - wakeup-source; + wsa-dai-link { + link-name = "WSA Playback"; + cpu { + sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; + }; - status = "disabled"; - }; + codec { + sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&wsamacro 0>; + }; - touchpad@2c { - compatible = "hid-over-i2c"; - reg = <0x2c>; + platform { + sound-dai = <&q6apm>; + }; + }; - hid-descr-addr = <0x20>; - interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>; - vdd-supply = <&vreg_misc_3p3>; + va-dai-link { + link-name = "VA Capture"; + cpu { + sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; + }; - pinctrl-names = "default"; - pinctrl-0 = <&tpad_default>; + platform { + sound-dai = <&q6apm>; + }; - wakeup-source; + codec { + sound-dai = <&vamacro 0>; + }; }; +}; - keyboard@68 { - compatible = "hid-over-i2c"; - reg = <0x68>; - - hid-descr-addr = <0x1>; - interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>; - vdd-supply = <&vreg_misc_3p3>; +&swr0 { + status = "okay"; + left_spkr: wsa8830-left@0,1 { + compatible = "sdw10217020200"; + reg = <0 1>; pinctrl-names = "default"; - pinctrl-0 = <&kybd_default>; + pinctrl-0 = <&spkr_1_sd_n_default>; + powerdown-gpios = <&tlmm 178 GPIO_ACTIVE_LOW>; + #thermal-sensor-cells = <0>; + sound-name-prefix = "SpkrLeft"; + #sound-dai-cells = <0>; + vdd-supply = <&vreg_s10b>; + }; - wakeup-source; + right_spkr: wsa8830-right@0,2 { + compatible = "sdw10217020200"; + reg = <0 2>; + pinctrl-names = "default"; + pinctrl-0 = <&spkr_2_sd_n_default>; + powerdown-gpios = <&tlmm 179 GPIO_ACTIVE_LOW>; + #thermal-sensor-cells = <0>; + sound-name-prefix = "SpkrRight"; + #sound-dai-cells = <0>; + vdd-supply = <&vreg_s10b>; }; }; -&remoteproc_adsp { - firmware-name = "qcom/sc8280xp/LENOVO/21BX/qcadsp8280.mbn"; - +&swr1 { status = "okay"; + + wcd_rx: wcd9380-rx@0,4 { + compatible = "sdw20217010d00"; + reg = <0 4>; + qcom,rx-port-mapping = <1 2 3 4 5>; + }; }; -&remoteproc_nsp0 { - firmware-name = "qcom/sc8280xp/LENOVO/21BX/qccdsp8280.mbn"; +&swr2 { + status = "okay"; + + wcd_tx: wcd9380-tx@0,3 { + compatible = "sdw20217010d00"; + reg = <0 3>; + qcom,tx-port-mapping = <1 1 2 3>; + }; +}; +&txmacro { status = "okay"; }; @@ -601,7 +1007,6 @@ }; &usb_0_dwc3 { - /* TODO: Define USB-C connector properly */ dr_mode = "host"; }; @@ -620,12 +1025,15 @@ status = "okay"; }; +&usb_0_role_switch { + remote-endpoint = <&pmic_glink_con0_hs>; +}; + &usb_1 { status = "okay"; }; &usb_1_dwc3 { - /* TODO: Define USB-C connector properly */ dr_mode = "host"; }; @@ -644,12 +1052,35 @@ status = "okay"; }; +&usb_1_role_switch { + remote-endpoint = <&pmic_glink_con1_hs>; +}; + +&vamacro { + pinctrl-0 = <&dmic01_default>, <&dmic02_default>; + pinctrl-names = "default"; + + vdd-micb-supply = <&vreg_s10b>; + + qcom,dmic-sample-rate = <600000>; + + status = "okay"; +}; + +&wsamacro { + status = "okay"; +}; + &xo_board_clk { clock-frequency = <38400000>; }; /* PINCTRL */ +&lpass_tlmm { + status = "okay"; +}; + &pmc8280_1_gpios { edp_bl_en: edp-bl-en-state { pins = "gpio8"; @@ -691,6 +1122,13 @@ &tlmm { gpio-reserved-ranges = <70 2>, <74 6>, <83 4>, <125 2>, <128 2>, <154 7>; + edp_reg_en: edp-reg-en-state { + pins = "gpio25"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + hall_int_n_default: hall-int-n-state { pins = "gpio107"; function = "gpio"; @@ -698,6 +1136,20 @@ bias-disable; }; + i2c4_default: i2c4-default-state { + pins = "gpio171", "gpio172"; + function = "qup4"; + drive-strength = <16>; + bias-disable; + }; + + i2c21_default: i2c21-default-state { + pins = "gpio81", "gpio82"; + function = "qup21"; + drive-strength = <16>; + bias-disable; + }; + kybd_default: kybd-default-state { disable-pins { pins = "gpio102"; @@ -794,18 +1246,24 @@ }; }; - qup0_i2c4_default: qup0-i2c4-default-state { - pins = "gpio171", "gpio172"; - function = "qup4"; - bias-disable; - drive-strength = <16>; + spkr_1_sd_n_default: spkr-1-sd-n-default-state { + perst-n-pins { + pins = "gpio178"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; }; - qup2_i2c5_default: qup2-i2c5-default-state { - pins = "gpio81", "gpio82"; - function = "qup21"; - bias-disable; - drive-strength = <16>; + spkr_2_sd_n_default: spkr-2-sd-n-default-state { + perst-n-pins { + pins = "gpio179"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; }; tpad_default: tpad-default-state { @@ -830,4 +1288,46 @@ drive-strength = <16>; }; }; + + usb0_sbu_default: usb0-sbu-state { + oe-n-pins { + pins = "gpio101"; + function = "gpio"; + bias-disable; + drive-strengh = <16>; + output-high; + }; + + sel-pins { + pins = "gpio164"; + function = "gpio"; + bias-disable; + drive-strength = <16>; + }; + }; + + usb1_sbu_default: usb1-sbu-state { + oe-n-pins { + pins = "gpio48"; + function = "gpio"; + bias-disable; + drive-strengh = <16>; + output-high; + }; + + sel-pins { + pins = "gpio47"; + function = "gpio"; + bias-disable; + drive-strength = <16>; + }; + }; + + wcd_default: wcd-default-state { + reset-pins { + pins = "gpio106"; + function = "gpio"; + bias-disable; + }; + }; }; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi index f2c0b71b5d8e..df7d28f7ae60 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi @@ -64,14 +64,14 @@ pmk8280_pon_pwrkey: pwrkey { compatible = "qcom,pmk8350-pwrkey"; - interrupts = <0x0 0x13 0x7 IRQ_TYPE_EDGE_BOTH>; + interrupts-extended = <&spmi_bus 0x0 0x13 0x7 IRQ_TYPE_EDGE_BOTH>; linux,code = <KEY_POWER>; status = "disabled"; }; pmk8280_pon_resin: resin { compatible = "qcom,pmk8350-resin"; - interrupts = <0x0 0x13 0x6 IRQ_TYPE_EDGE_BOTH>; + interrupts-extended = <&spmi_bus 0x0 0x13 0x6 IRQ_TYPE_EDGE_BOTH>; status = "disabled"; }; }; @@ -79,7 +79,7 @@ pmk8280_vadc: adc@3100 { compatible = "qcom,spmi-adc7"; reg = <0x3100>; - interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + interrupts-extended = <&spmi_bus 0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; #address-cells = <1>; #size-cells = <0>; #io-channel-cells = <1>; @@ -89,7 +89,7 @@ pmk8280_adc_tm: adc-tm@3400 { compatible = "qcom,spmi-adc-tm5-gen2"; reg = <0x3400>; - interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>; + interrupts-extended = <&spmi_bus 0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>; #address-cells = <1>; #size-cells = <0>; #thermal-sensor-cells = <1>; @@ -106,7 +106,7 @@ pm8280_1_temp_alarm: temp-alarm@a00 { compatible = "qcom,spmi-temp-alarm"; reg = <0xa00>; - interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + interrupts-extended = <&spmi_bus 0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; #thermal-sensor-cells = <0>; }; @@ -158,7 +158,7 @@ pm8280_2_temp_alarm: temp-alarm@a00 { compatible = "qcom,spmi-temp-alarm"; reg = <0xa00>; - interrupts = <0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + interrupts-extended = <&spmi_bus 0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; #thermal-sensor-cells = <0>; }; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi index 109c9d2b684d..0d02599d8867 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi @@ -4,14 +4,18 @@ * Copyright (c) 2022, Linaro Limited */ +#include <dt-bindings/clock/qcom,dispcc-sc8280xp.h> #include <dt-bindings/clock/qcom,gcc-sc8280xp.h> #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/interconnect/qcom,osm-l3.h> #include <dt-bindings/interconnect/qcom,sc8280xp.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/mailbox/qcom-ipcc.h> +#include <dt-bindings/phy/phy-qcom-qmp.h> #include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/soc/qcom,gpr.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> +#include <dt-bindings/sound/qcom,q6afe.h> #include <dt-bindings/thermal/thermal.h> / { @@ -33,186 +37,6 @@ }; }; - cpu0_opp_table: cpu0-opp-table { - compatible = "operating-points-v2"; - opp-shared; - - opp-300000000 { - opp-hz = /bits/ 64 <300000000>; - opp-peak-kBps = <(300000 * 32)>; - }; - opp-403200000 { - opp-hz = /bits/ 64 <403200000>; - opp-peak-kBps = <(384000 * 32)>; - }; - opp-499200000 { - opp-hz = /bits/ 64 <499200000>; - opp-peak-kBps = <(480000 * 32)>; - }; - opp-595200000 { - opp-hz = /bits/ 64 <595200000>; - opp-peak-kBps = <(576000 * 32)>; - }; - opp-691200000 { - opp-hz = /bits/ 64 <691200000>; - opp-peak-kBps = <(672000 * 32)>; - }; - opp-806400000 { - opp-hz = /bits/ 64 <806400000>; - opp-peak-kBps = <(768000 * 32)>; - }; - opp-902400000 { - opp-hz = /bits/ 64 <902400000>; - opp-peak-kBps = <(864000 * 32)>; - }; - opp-1017600000 { - opp-hz = /bits/ 64 <1017600000>; - opp-peak-kBps = <(960000 * 32)>; - }; - opp-1113600000 { - opp-hz = /bits/ 64 <1113600000>; - opp-peak-kBps = <(1075200 * 32)>; - }; - opp-1209600000 { - opp-hz = /bits/ 64 <1209600000>; - opp-peak-kBps = <(1171200 * 32)>; - }; - opp-1324800000 { - opp-hz = /bits/ 64 <1324800000>; - opp-peak-kBps = <(1267200 * 32)>; - }; - opp-1440000000 { - opp-hz = /bits/ 64 <1440000000>; - opp-peak-kBps = <(1363200 * 32)>; - }; - opp-1555200000 { - opp-hz = /bits/ 64 <1555200000>; - opp-peak-kBps = <(1536000 * 32)>; - }; - opp-1670400000 { - opp-hz = /bits/ 64 <1670400000>; - opp-peak-kBps = <(1612800 * 32)>; - }; - opp-1785600000 { - opp-hz = /bits/ 64 <1785600000>; - opp-peak-kBps = <(1689600 * 32)>; - }; - opp-1881600000 { - opp-hz = /bits/ 64 <1881600000>; - opp-peak-kBps = <(1689600 * 32)>; - }; - opp-1996800000 { - opp-hz = /bits/ 64 <1996800000>; - opp-peak-kBps = <(1689600 * 32)>; - }; - opp-2112000000 { - opp-hz = /bits/ 64 <2112000000>; - opp-peak-kBps = <(1689600 * 32)>; - }; - opp-2227200000 { - opp-hz = /bits/ 64 <2227200000>; - opp-peak-kBps = <(1689600 * 32)>; - }; - opp-2342400000 { - opp-hz = /bits/ 64 <2342400000>; - opp-peak-kBps = <(1689600 * 32)>; - }; - opp-2438400000 { - opp-hz = /bits/ 64 <2438400000>; - opp-peak-kBps = <(1689600 * 32)>; - }; - }; - - cpu4_opp_table: cpu4-opp-table { - compatible = "operating-points-v2"; - opp-shared; - - opp-825600000 { - opp-hz = /bits/ 64 <825600000>; - opp-peak-kBps = <(768000 * 32)>; - }; - opp-940800000 { - opp-hz = /bits/ 64 <940800000>; - opp-peak-kBps = <(864000 * 32)>; - }; - opp-1056000000 { - opp-hz = /bits/ 64 <1056000000>; - opp-peak-kBps = <(960000 * 32)>; - }; - opp-1171200000 { - opp-hz = /bits/ 64 <1171200000>; - opp-peak-kBps = <(1171200 * 32)>; - }; - opp-1286400000 { - opp-hz = /bits/ 64 <1286400000>; - opp-peak-kBps = <(1267200 * 32)>; - }; - opp-1401600000 { - opp-hz = /bits/ 64 <1401600000>; - opp-peak-kBps = <(1363200 * 32)>; - }; - opp-1516800000 { - opp-hz = /bits/ 64 <1516800000>; - opp-peak-kBps = <(1459200 * 32)>; - }; - opp-1632000000 { - opp-hz = /bits/ 64 <1632000000>; - opp-peak-kBps = <(1612800 * 32)>; - }; - opp-1747200000 { - opp-hz = /bits/ 64 <1747200000>; - opp-peak-kBps = <(1689600 * 32)>; - }; - opp-1862400000 { - opp-hz = /bits/ 64 <1862400000>; - opp-peak-kBps = <(1689600 * 32)>; - }; - opp-1977600000 { - opp-hz = /bits/ 64 <1977600000>; - opp-peak-kBps = <(1689600 * 32)>; - }; - opp-2073600000 { - opp-hz = /bits/ 64 <2073600000>; - opp-peak-kBps = <(1689600 * 32)>; - }; - opp-2169600000 { - opp-hz = /bits/ 64 <2169600000>; - opp-peak-kBps = <(1689600 * 32)>; - }; - opp-2284800000 { - opp-hz = /bits/ 64 <2284800000>; - opp-peak-kBps = <(1689600 * 32)>; - }; - opp-2400000000 { - opp-hz = /bits/ 64 <2400000000>; - opp-peak-kBps = <(1689600 * 32)>; - }; - opp-2496000000 { - opp-hz = /bits/ 64 <2496000000>; - opp-peak-kBps = <(1689600 * 32)>; - }; - opp-2592000000 { - opp-hz = /bits/ 64 <2592000000>; - opp-peak-kBps = <(1689600 * 32)>; - }; - opp-2688000000 { - opp-hz = /bits/ 64 <2688000000>; - opp-peak-kBps = <(1689600 * 32)>; - }; - opp-2803200000 { - opp-hz = /bits/ 64 <2803200000>; - opp-peak-kBps = <(1689600 * 32)>; - }; - opp-2899200000 { - opp-hz = /bits/ 64 <2899200000>; - opp-peak-kBps = <(1689600 * 32)>; - }; - opp-2995200000 { - opp-hz = /bits/ 64 <2995200000>; - opp-peak-kBps = <(1689600 * 32)>; - }; - }; - cpus { #address-cells = <2>; #size-cells = <0>; @@ -232,9 +56,11 @@ #cooling-cells = <2>; L2_0: l2-cache { compatible = "cache"; + cache-level = <2>; next-level-cache = <&L3_0>; L3_0: l3-cache { compatible = "cache"; + cache-level = <3>; }; }; }; @@ -254,6 +80,7 @@ #cooling-cells = <2>; L2_100: l2-cache { compatible = "cache"; + cache-level = <2>; next-level-cache = <&L3_0>; }; }; @@ -273,6 +100,7 @@ #cooling-cells = <2>; L2_200: l2-cache { compatible = "cache"; + cache-level = <2>; next-level-cache = <&L3_0>; }; }; @@ -292,6 +120,7 @@ #cooling-cells = <2>; L2_300: l2-cache { compatible = "cache"; + cache-level = <2>; next-level-cache = <&L3_0>; }; }; @@ -311,6 +140,7 @@ #cooling-cells = <2>; L2_400: l2-cache { compatible = "cache"; + cache-level = <2>; next-level-cache = <&L3_0>; }; }; @@ -330,6 +160,7 @@ #cooling-cells = <2>; L2_500: l2-cache { compatible = "cache"; + cache-level = <2>; next-level-cache = <&L3_0>; }; }; @@ -349,6 +180,7 @@ #cooling-cells = <2>; L2_600: l2-cache { compatible = "cache"; + cache-level = <2>; next-level-cache = <&L3_0>; }; }; @@ -368,6 +200,7 @@ #cooling-cells = <2>; L2_700: l2-cache { compatible = "cache"; + cache-level = <2>; next-level-cache = <&L3_0>; }; }; @@ -528,6 +361,200 @@ reg = <0x0 0x80000000 0x0 0x0>; }; + cpu0_opp_table: opp-table-cpu0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-peak-kBps = <(300000 * 32)>; + }; + opp-403200000 { + opp-hz = /bits/ 64 <403200000>; + opp-peak-kBps = <(384000 * 32)>; + }; + opp-499200000 { + opp-hz = /bits/ 64 <499200000>; + opp-peak-kBps = <(480000 * 32)>; + }; + opp-595200000 { + opp-hz = /bits/ 64 <595200000>; + opp-peak-kBps = <(576000 * 32)>; + }; + opp-691200000 { + opp-hz = /bits/ 64 <691200000>; + opp-peak-kBps = <(672000 * 32)>; + }; + opp-806400000 { + opp-hz = /bits/ 64 <806400000>; + opp-peak-kBps = <(768000 * 32)>; + }; + opp-902400000 { + opp-hz = /bits/ 64 <902400000>; + opp-peak-kBps = <(864000 * 32)>; + }; + opp-1017600000 { + opp-hz = /bits/ 64 <1017600000>; + opp-peak-kBps = <(960000 * 32)>; + }; + opp-1113600000 { + opp-hz = /bits/ 64 <1113600000>; + opp-peak-kBps = <(1075200 * 32)>; + }; + opp-1209600000 { + opp-hz = /bits/ 64 <1209600000>; + opp-peak-kBps = <(1171200 * 32)>; + }; + opp-1324800000 { + opp-hz = /bits/ 64 <1324800000>; + opp-peak-kBps = <(1267200 * 32)>; + }; + opp-1440000000 { + opp-hz = /bits/ 64 <1440000000>; + opp-peak-kBps = <(1363200 * 32)>; + }; + opp-1555200000 { + opp-hz = /bits/ 64 <1555200000>; + opp-peak-kBps = <(1536000 * 32)>; + }; + opp-1670400000 { + opp-hz = /bits/ 64 <1670400000>; + opp-peak-kBps = <(1612800 * 32)>; + }; + opp-1785600000 { + opp-hz = /bits/ 64 <1785600000>; + opp-peak-kBps = <(1689600 * 32)>; + }; + opp-1881600000 { + opp-hz = /bits/ 64 <1881600000>; + opp-peak-kBps = <(1689600 * 32)>; + }; + opp-1996800000 { + opp-hz = /bits/ 64 <1996800000>; + opp-peak-kBps = <(1689600 * 32)>; + }; + opp-2112000000 { + opp-hz = /bits/ 64 <2112000000>; + opp-peak-kBps = <(1689600 * 32)>; + }; + opp-2227200000 { + opp-hz = /bits/ 64 <2227200000>; + opp-peak-kBps = <(1689600 * 32)>; + }; + opp-2342400000 { + opp-hz = /bits/ 64 <2342400000>; + opp-peak-kBps = <(1689600 * 32)>; + }; + opp-2438400000 { + opp-hz = /bits/ 64 <2438400000>; + opp-peak-kBps = <(1689600 * 32)>; + }; + }; + + cpu4_opp_table: opp-table-cpu4 { + compatible = "operating-points-v2"; + opp-shared; + + opp-825600000 { + opp-hz = /bits/ 64 <825600000>; + opp-peak-kBps = <(768000 * 32)>; + }; + opp-940800000 { + opp-hz = /bits/ 64 <940800000>; + opp-peak-kBps = <(864000 * 32)>; + }; + opp-1056000000 { + opp-hz = /bits/ 64 <1056000000>; + opp-peak-kBps = <(960000 * 32)>; + }; + opp-1171200000 { + opp-hz = /bits/ 64 <1171200000>; + opp-peak-kBps = <(1171200 * 32)>; + }; + opp-1286400000 { + opp-hz = /bits/ 64 <1286400000>; + opp-peak-kBps = <(1267200 * 32)>; + }; + opp-1401600000 { + opp-hz = /bits/ 64 <1401600000>; + opp-peak-kBps = <(1363200 * 32)>; + }; + opp-1516800000 { + opp-hz = /bits/ 64 <1516800000>; + opp-peak-kBps = <(1459200 * 32)>; + }; + opp-1632000000 { + opp-hz = /bits/ 64 <1632000000>; + opp-peak-kBps = <(1612800 * 32)>; + }; + opp-1747200000 { + opp-hz = /bits/ 64 <1747200000>; + opp-peak-kBps = <(1689600 * 32)>; + }; + opp-1862400000 { + opp-hz = /bits/ 64 <1862400000>; + opp-peak-kBps = <(1689600 * 32)>; + }; + opp-1977600000 { + opp-hz = /bits/ 64 <1977600000>; + opp-peak-kBps = <(1689600 * 32)>; + }; + opp-2073600000 { + opp-hz = /bits/ 64 <2073600000>; + opp-peak-kBps = <(1689600 * 32)>; + }; + opp-2169600000 { + opp-hz = /bits/ 64 <2169600000>; + opp-peak-kBps = <(1689600 * 32)>; + }; + opp-2284800000 { + opp-hz = /bits/ 64 <2284800000>; + opp-peak-kBps = <(1689600 * 32)>; + }; + opp-2400000000 { + opp-hz = /bits/ 64 <2400000000>; + opp-peak-kBps = <(1689600 * 32)>; + }; + opp-2496000000 { + opp-hz = /bits/ 64 <2496000000>; + opp-peak-kBps = <(1689600 * 32)>; + }; + opp-2592000000 { + opp-hz = /bits/ 64 <2592000000>; + opp-peak-kBps = <(1689600 * 32)>; + }; + opp-2688000000 { + opp-hz = /bits/ 64 <2688000000>; + opp-peak-kBps = <(1689600 * 32)>; + }; + opp-2803200000 { + opp-hz = /bits/ 64 <2803200000>; + opp-peak-kBps = <(1689600 * 32)>; + }; + opp-2899200000 { + opp-hz = /bits/ 64 <2899200000>; + opp-peak-kBps = <(1689600 * 32)>; + }; + opp-2995200000 { + opp-hz = /bits/ 64 <2995200000>; + opp-peak-kBps = <(1689600 * 32)>; + }; + }; + + qup_opp_table_100mhz: opp-table-qup100mhz { + compatible = "operating-points-v2"; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + }; + pmu { compatible = "arm,armv8-pmuv3"; interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; @@ -537,74 +564,60 @@ compatible = "arm,psci-1.0"; method = "smc"; - CPU_PD0: cpu0 { + CPU_PD0: power-domain-cpu0 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&LITTLE_CPU_SLEEP_0>; }; - CPU_PD1: cpu1 { + CPU_PD1: power-domain-cpu1 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&LITTLE_CPU_SLEEP_0>; }; - CPU_PD2: cpu2 { + CPU_PD2: power-domain-cpu2 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&LITTLE_CPU_SLEEP_0>; }; - CPU_PD3: cpu3 { + CPU_PD3: power-domain-cpu3 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&LITTLE_CPU_SLEEP_0>; }; - CPU_PD4: cpu4 { + CPU_PD4: power-domain-cpu4 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&BIG_CPU_SLEEP_0>; }; - CPU_PD5: cpu5 { + CPU_PD5: power-domain-cpu5 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&BIG_CPU_SLEEP_0>; }; - CPU_PD6: cpu6 { + CPU_PD6: power-domain-cpu6 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&BIG_CPU_SLEEP_0>; }; - CPU_PD7: cpu7 { + CPU_PD7: power-domain-cpu7 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&BIG_CPU_SLEEP_0>; }; - CLUSTER_PD: cpu-cluster0 { + CLUSTER_PD: power-domain-cpu-cluster0 { #power-domain-cells = <0>; domain-idle-states = <&CLUSTER_SLEEP_0>; }; }; - qup_opp_table_100mhz: qup-100mhz-opp-table { - compatible = "operating-points-v2"; - - opp-75000000 { - opp-hz = /bits/ 64 <75000000>; - required-opps = <&rpmhpd_opp_low_svs>; - }; - - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - required-opps = <&rpmhpd_opp_svs>; - }; - }; - reserved-memory { #address-cells = <2>; #size-cells = <2>; @@ -762,7 +775,7 @@ <0>, <0>, <0>, - <&usb_0_ssphy>, + <&usb_0_qmpphy QMP_USB43DP_USB3_PIPE_CLK>, <0>, <0>, <0>, @@ -770,7 +783,7 @@ <0>, <0>, <0>, - <&usb_1_ssphy>, + <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>, <0>, <0>, <0>, @@ -813,7 +826,71 @@ status = "disabled"; - qup2_uart17: serial@884000 { + i2c16: i2c@880000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00880000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + spi16: spi@880000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00880000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + i2c17: i2c@884000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00884000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + spi17: spi@884000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00884000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + uart17: serial@884000 { compatible = "qcom,geni-uart"; reg = <0 0x00884000 0 0x4000>; clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; @@ -827,7 +904,103 @@ status = "disabled"; }; - qup2_i2c5: i2c@894000 { + i2c18: i2c@888000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00888000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + spi18: spi@888000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00888000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + i2c19: i2c@88c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0088c000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + spi19: spi@88c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0088c000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + i2c20: i2c@890000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00890000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + spi20: spi@890000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00890000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + i2c21: i2c@894000 { compatible = "qcom,geni-i2c"; reg = <0 0x00894000 0 0x4000>; clock-names = "se"; @@ -842,6 +1015,86 @@ interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; }; + + spi21: spi@894000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00894000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + i2c22: i2c@898000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00898000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>; + interrupts = <GIC_SPI 833 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + spi22: spi@898000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00898000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 833 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + i2c23: i2c@89c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0089c000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>; + interrupts = <GIC_SPI 834 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + spi23: spi@89c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0089c000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 834 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; }; qup0: geniqup@9c0000 { @@ -858,7 +1111,135 @@ status = "disabled"; - qup0_i2c4: i2c@990000 { + i2c0: i2c@980000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00980000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + spi0: spi@980000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00980000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + i2c1: i2c@984000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00984000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + spi1: spi@984000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00984000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + i2c2: i2c@988000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00988000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + spi2: spi@988000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00988000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + i2c3: i2c@98c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0098c000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + spi3: spi@98c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0098c000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + i2c4: i2c@990000 { compatible = "qcom,geni-i2c"; reg = <0 0x00990000 0 0x4000>; clock-names = "se"; @@ -873,6 +1254,118 @@ interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; }; + + spi4: spi@990000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00990000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + i2c5: i2c@994000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00994000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + spi5: spi@994000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00994000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + i2c6: i2c@998000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00998000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + spi6: spi@998000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00998000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + i2c7: i2c@99c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0099c000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + spi7: spi@99c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0099c000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; }; qup1: geniqup@ac0000 { @@ -888,6 +1381,269 @@ ranges; status = "disabled"; + + i2c8: i2c@a80000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a80000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + spi8: spi@a80000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a80000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + i2c9: i2c@a84000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a84000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + spi9: spi@a84000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a84000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + i2c10: i2c@a88000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a88000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + spi10: spi@a88000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a88000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + i2c11: i2c@a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a8c000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + spi11: spi@a8c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a8c000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + i2c12: i2c@a90000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a90000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + spi12: spi@a90000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a90000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + i2c13: i2c@a94000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a94000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + spi13: spi@a94000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a94000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + i2c14: i2c@a98000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a98000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 835 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + spi14: spi@a98000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a98000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 835 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + i2c15: i2c@a9c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a9c000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + spi15: spi@a9c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a9c000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + }; + + rng: rng@10d3000 { + compatible = "qcom,prng-ee"; + reg = <0 0x010d3000 0 0x1000>; + clocks = <&rpmhcc RPMH_HWKM_CLK>; + clock-names = "core"; }; pcie4: pcie@1c00000 { @@ -1670,45 +2426,396 @@ label = "lpass"; qcom,remote-pid = <2>; + + gpr { + compatible = "qcom,gpr"; + qcom,glink-channels = "adsp_apps"; + qcom,domain = <GPR_DOMAIN_ID_ADSP>; + qcom,intents = <512 20>; + #address-cells = <1>; + #size-cells = <0>; + + q6apm: service@1 { + compatible = "qcom,q6apm"; + reg = <GPR_APM_MODULE_IID>; + #sound-dai-cells = <0>; + qcom,protection-domain = "avs/audio", + "msm/adsp/audio_pd"; + q6apmdai: dais { + compatible = "qcom,q6apm-dais"; + iommus = <&apps_smmu 0x0c01 0x0>; + }; + + q6apmbedai: bedais { + compatible = "qcom,q6apm-lpass-dais"; + #sound-dai-cells = <1>; + }; + }; + + q6prm: service@2 { + compatible = "qcom,q6prm"; + reg = <GPR_PRM_MODULE_IID>; + qcom,protection-domain = "avs/audio", + "msm/adsp/audio_pd"; + q6prmcc: clock-controller { + compatible = "qcom,q6prm-lpass-clocks"; + #clock-cells = <2>; + }; + }; + }; }; }; - usb_0_qmpphy: phy-wrapper@88ec000 { - compatible = "qcom,sc8280xp-qmp-usb43dp-phy"; - reg = <0 0x088ec000 0 0x1e4>, - <0 0x088eb000 0 0x40>, - <0 0x088ed000 0 0x1c8>; + rxmacro: rxmacro@3200000 { + compatible = "qcom,sc8280xp-lpass-rx-macro"; + reg = <0 0x03200000 0 0x1000>; + clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&vamacro>; + clock-names = "mclk", "npl", "macro", "dcodec", "fsgen"; + assigned-clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + assigned-clock-rates = <19200000>, <19200000>; + + clock-output-names = "mclk"; + #clock-cells = <0>; + #sound-dai-cells = <1>; + + pinctrl-names = "default"; + pinctrl-0 = <&rx_swr_default>; + + status = "disabled"; + }; + + /* RX */ + swr1: soundwire-controller@3210000 { + compatible = "qcom,soundwire-v1.6.0"; + reg = <0 0x03210000 0 0x2000>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rxmacro>; + clock-names = "iface"; + label = "RX"; + + qcom,din-ports = <0>; + qcom,dout-ports = <5>; + + qcom,ports-sinterval-low = /bits/ 8 <0x03 0x1f 0x1f 0x07 0x00>; + qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0B 0x01 0x00>; + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0B 0x00 0x00>; + qcom,ports-hstart = /bits/ 8 <0xff 0x03 0xff 0xff 0xff>; + qcom,ports-hstop = /bits/ 8 <0xff 0x06 0xff 0xff 0xff>; + qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xff 0xff>; + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0x00 0x01 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0x00>; + + #sound-dai-cells = <1>; #address-cells = <2>; - #size-cells = <2>; - ranges; + #size-cells = <0>; + + status = "disabled"; + }; + + txmacro: txmacro@3220000 { + compatible = "qcom,sc8280xp-lpass-tx-macro"; + reg = <0 0x03220000 0 0x1000>; + pinctrl-names = "default"; + pinctrl-0 = <&tx_swr_default>; + clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&vamacro>; + + clock-names = "mclk", "npl", "macro", "dcodec", "fsgen"; + assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + assigned-clock-rates = <19200000>, <19200000>; + clock-output-names = "mclk"; + + #clock-cells = <0>; + #sound-dai-cells = <1>; + + status = "disabled"; + }; + + wsamacro: codec@3240000 { + compatible = "qcom,sc8280xp-lpass-wsa-macro"; + reg = <0 0x03240000 0 0x1000>; + clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&vamacro>; + clock-names = "mclk", "npl", "macro", "dcodec", "fsgen"; + assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + assigned-clock-rates = <19200000>, <19200000>; + + #clock-cells = <0>; + clock-output-names = "mclk"; + #sound-dai-cells = <1>; + + pinctrl-names = "default"; + pinctrl-0 = <&wsa_swr_default>; + + status = "disabled"; + }; + + /* WSA */ + swr0: soundwire-controller@3250000 { + reg = <0 0x03250000 0 0x2000>; + compatible = "qcom,soundwire-v1.6.0"; + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&wsamacro>; + clock-names = "iface"; + + qcom,din-ports = <2>; + qcom,dout-ports = <6>; + + qcom,ports-sinterval-low = /bits/ 8 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x0f 0x0f>; + qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0c 0x06 0x12 0x0d 0x07 0x0a>; + qcom,ports-offset2 = /bits/ 8 <0xff 0x00 0x1f 0xff 0x00 0x1f 0x00 0x00>; + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0x01 0xff 0xff 0x01 0xff 0xff>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + + #sound-dai-cells = <1>; + #address-cells = <2>; + #size-cells = <0>; + + status = "disabled"; + }; + + /* TX */ + swr2: soundwire-controller@3330000 { + compatible = "qcom,soundwire-v1.6.0"; + reg = <0 0x03330000 0 0x2000>; + interrupts-extended = <&intc GIC_SPI 959 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "core", "wake"; + + clocks = <&vamacro>; + clock-names = "iface"; + label = "TX"; + #sound-dai-cells = <1>; + #address-cells = <2>; + #size-cells = <0>; + + qcom,din-ports = <4>; + qcom,dout-ports = <0>; + qcom,ports-sinterval-low = /bits/ 8 <0x01 0x03 0x03 0x03>; + qcom,ports-offset1 = /bits/ 8 <0x01 0x00 0x02 0x01>; + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x00 0x00>; + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-word-length = /bits/ 8 <0xff 0x00 0xff 0xff>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0x00 0x01 0x00 0x00>; + + status = "disabled"; + }; + + vamacro: codec@3370000 { + compatible = "qcom,sc8280xp-lpass-va-macro"; + reg = <0 0x03370000 0 0x1000>; + clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "mclk", "macro", "dcodec", "npl"; + assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + assigned-clock-rates = <19200000>; + + #clock-cells = <0>; + clock-output-names = "fsgen"; + #sound-dai-cells = <1>; + + status = "disabled"; + }; + + lpass_tlmm: pinctrl@33c0000 { + compatible = "qcom,sc8280xp-lpass-lpi-pinctrl"; + reg = <0 0x33c0000 0x0 0x20000>, + <0 0x3550000 0x0 0x10000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lpass_tlmm 0 0 19>; + + clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "core", "audio"; + + status = "disabled"; + + tx_swr_default: tx-swr-default-state { + clk-pins { + pins = "gpio0"; + function = "swr_tx_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio1", "gpio2"; + function = "swr_tx_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + }; + }; + + rx_swr_default: rx-swr-default-state { + clk-pins { + pins = "gpio3"; + function = "swr_rx_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio4", "gpio5"; + function = "swr_rx_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + }; + }; + + dmic01_default: dmic01-default-state { + clk-pins { + pins = "gpio6"; + function = "dmic1_clk"; + drive-strength = <8>; + output-high; + }; + + data-pins { + pins = "gpio7"; + function = "dmic1_data"; + drive-strength = <8>; + input-enable; + }; + }; + + dmic01_sleep: dmic01-sleep-state { + clk-pins { + pins = "gpio6"; + function = "dmic1_clk"; + drive-strength = <2>; + bias-disable; + output-low; + }; + + data-pins { + pins = "gpio7"; + function = "dmic1_data"; + drive-strength = <2>; + bias-pull-down; + input-enable; + }; + }; + + dmic02_default: dmic02-default-state { + clk-pins { + pins = "gpio8"; + function = "dmic2_clk"; + drive-strength = <8>; + output-high; + }; + + data-pins { + pins = "gpio9"; + function = "dmic2_data"; + drive-strength = <8>; + input-enable; + }; + }; + + dmic02_sleep: dmic02-sleep-state { + clk-pins { + pins = "gpio8"; + function = "dmic2_clk"; + drive-strength = <2>; + bias-disable; + output-low; + }; + + data-pins { + pins = "gpio9"; + function = "dmic2_data"; + drive-strength = <2>; + bias-pull-down; + input-enable; + }; + }; + + wsa_swr_default: wsa-swr-default-state { + clk-pins { + pins = "gpio10"; + function = "wsa_swr_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio11"; + function = "wsa_swr_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + + }; + }; + + wsa2_swr_default: wsa2-swr-default-state { + clk-pins { + pins = "gpio15"; + function = "wsa2_swr_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio16"; + function = "wsa2_swr_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + }; + }; + }; + + usb_0_qmpphy: phy@88eb000 { + compatible = "qcom,sc8280xp-qmp-usb43dp-phy"; + reg = <0 0x088eb000 0 0x4000>; clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, - <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_USB4_EUD_CLKREF_CLK>, - <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; - clock-names = "aux", "ref_clk_src", "ref", "com_aux"; + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "aux", "ref", "com_aux", "usb3_pipe"; + + power-domains = <&gcc USB30_PRIM_GDSC>; resets = <&gcc GCC_USB3_PHY_PRIM_BCR>, - <&gcc GCC_USB3_DP_PHY_PRIM_BCR>; + <&gcc GCC_USB4_DP_PHY_PRIM_BCR>; reset-names = "phy", "common"; - power-domains = <&gcc USB30_PRIM_GDSC>; + #clock-cells = <1>; + #phy-cells = <1>; status = "disabled"; - - usb_0_ssphy: usb3-phy@88eb400 { - reg = <0 0x088eb400 0 0x100>, - <0 0x088eb600 0 0x3ec>, - <0 0x088ec400 0 0x364>, - <0 0x088eba00 0 0x100>, - <0 0x088ebc00 0 0x3ec>, - <0 0x088ec200 0 0x18>; - #phy-cells = <0>; - #clock-cells = <0>; - clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb0_phy_pipe_clk_src"; - }; }; usb_1_hsphy: phy@8902000 { @@ -1725,47 +2832,67 @@ status = "disabled"; }; - usb_1_qmpphy: phy-wrapper@8904000 { + usb_1_qmpphy: phy@8903000 { compatible = "qcom,sc8280xp-qmp-usb43dp-phy"; - reg = <0 0x08904000 0 0x1e4>, - <0 0x08903000 0 0x40>, - <0 0x08905000 0 0x1c8>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + reg = <0 0x08903000 0 0x4000>; clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, - <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_USB4_CLKREF_CLK>, - <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>; - clock-names = "aux", "ref_clk_src", "ref", "com_aux"; + <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; + clock-names = "aux", "ref", "com_aux", "usb3_pipe"; + + power-domains = <&gcc USB30_SEC_GDSC>; resets = <&gcc GCC_USB3_PHY_SEC_BCR>, <&gcc GCC_USB4_1_DP_PHY_PRIM_BCR>; reset-names = "phy", "common"; - power-domains = <&gcc USB30_SEC_GDSC>; + #clock-cells = <1>; + #phy-cells = <1>; status = "disabled"; + }; - usb_1_ssphy: usb3-phy@8903400 { - reg = <0 0x08903400 0 0x100>, - <0 0x08903600 0 0x3ec>, - <0 0x08904400 0 0x364>, - <0 0x08903a00 0 0x100>, - <0 0x08903c00 0 0x3ec>, - <0 0x08904200 0 0x18>; - #phy-cells = <0>; - #clock-cells = <0>; - clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb1_phy_pipe_clk_src"; - }; + mdss1_dp0_phy: phy@8909a00 { + compatible = "qcom,sc8280xp-dp-phy"; + reg = <0 0x08909a00 0 0x19c>, + <0 0x08909200 0 0xec>, + <0 0x08909600 0 0xec>, + <0 0x08909000 0 0x1c8>; + + clocks = <&dispcc1 DISP_CC_MDSS_DPTX0_AUX_CLK>, + <&dispcc1 DISP_CC_MDSS_AHB_CLK>; + clock-names = "aux", "cfg_ahb"; + power-domains = <&rpmhpd SC8280XP_MX>; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + + mdss1_dp1_phy: phy@890ca00 { + compatible = "qcom,sc8280xp-dp-phy"; + reg = <0 0x0890ca00 0 0x19c>, + <0 0x0890c200 0 0xec>, + <0 0x0890c600 0 0xec>, + <0 0x0890c000 0 0x1c8>; + + clocks = <&dispcc1 DISP_CC_MDSS_DPTX1_AUX_CLK>, + <&dispcc1 DISP_CC_MDSS_AHB_CLK>; + clock-names = "aux", "cfg_ahb"; + power-domains = <&rpmhpd SC8280XP_MX>; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; }; pmu@9091000 { compatible = "qcom,sc8280xp-llcc-bwmon", "qcom,sc7280-llcc-bwmon"; - reg = <0 0x9091000 0 0x1000>; + reg = <0 0x09091000 0 0x1000>; interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; @@ -1894,6 +3021,7 @@ "ss_phy_irq"; power-domains = <&gcc USB30_PRIM_GDSC>; + required-opps = <&rpmhpd_opp_nom>; resets = <&gcc GCC_USB30_PRIM_BCR>; @@ -1910,8 +3038,13 @@ reg = <0 0x0a600000 0 0xcd00>; interrupts = <GIC_SPI 803 IRQ_TYPE_LEVEL_HIGH>; iommus = <&apps_smmu 0x820 0x0>; - phys = <&usb_0_hsphy>, <&usb_0_ssphy>; + phys = <&usb_0_hsphy>, <&usb_0_qmpphy QMP_USB43DP_USB3_PHY>; phy-names = "usb2-phy", "usb3-phy"; + + port { + usb_0_role_switch: endpoint { + }; + }; }; }; @@ -1948,6 +3081,7 @@ "ss_phy_irq"; power-domains = <&gcc USB30_SEC_GDSC>; + required-opps = <&rpmhpd_opp_nom>; resets = <&gcc GCC_USB30_SEC_BCR>; @@ -1964,11 +3098,497 @@ reg = <0 0x0a800000 0 0xcd00>; interrupts = <GIC_SPI 810 IRQ_TYPE_LEVEL_HIGH>; iommus = <&apps_smmu 0x860 0x0>; - phys = <&usb_1_hsphy>, <&usb_1_ssphy>; + phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>; phy-names = "usb2-phy", "usb3-phy"; + + port { + usb_1_role_switch: endpoint { + }; + }; + }; + }; + + mdss0: display-subsystem@ae00000 { + compatible = "qcom,sc8280xp-mdss"; + reg = <0 0x0ae00000 0 0x1000>; + reg-names = "mdss"; + + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&dispcc0 DISP_CC_MDSS_AHB_CLK>, + <&dispcc0 DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", + "ahb", + "core"; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>, + <&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "mdp0-mem", "mdp1-mem"; + iommus = <&apps_smmu 0x1000 0x402>; + power-domains = <&dispcc0 MDSS_GDSC>; + resets = <&dispcc0 DISP_CC_MDSS_CORE_BCR>; + + interrupt-controller; + #interrupt-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + mdss0_mdp: display-controller@ae01000 { + compatible = "qcom,sc8280xp-dpu"; + reg = <0 0x0ae01000 0 0x8f000>, + <0 0x0aeb0000 0 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc0 DISP_CC_MDSS_AHB_CLK>, + <&dispcc0 DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc0 DISP_CC_MDSS_MDP_CLK>, + <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", + "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + interrupt-parent = <&mdss0>; + interrupts = <0>; + power-domains = <&rpmhpd SC8280XP_MMCX>; + + assigned-clocks = <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + operating-points-v2 = <&mdss0_mdp_opp_table>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss0_intf0_out: endpoint { + remote-endpoint = <&mdss0_dp0_in>; + }; + }; + + port@4 { + reg = <4>; + mdss0_intf4_out: endpoint { + remote-endpoint = <&mdss0_dp1_in>; + }; + }; + + port@5 { + reg = <5>; + mdss0_intf5_out: endpoint { + remote-endpoint = <&mdss0_dp3_in>; + }; + }; + + port@6 { + reg = <6>; + mdss0_intf6_out: endpoint { + remote-endpoint = <&mdss0_dp2_in>; + }; + }; + }; + + mdss0_mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-375000000 { + opp-hz = /bits/ 64 <375000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + required-opps = <&rpmhpd_opp_turbo_l1>; + }; + }; + }; + + mdss0_dp0: displayport-controller@ae90000 { + compatible = "qcom,sc8280xp-dp"; + reg = <0 0xae90000 0 0x200>, + <0 0xae90200 0 0x200>, + <0 0xae90400 0 0x600>, + <0 0xae91000 0 0x400>, + <0 0xae91400 0 0x400>; + interrupt-parent = <&mdss0>; + interrupts = <12>; + clocks = <&dispcc0 DISP_CC_MDSS_AHB_CLK>, + <&dispcc0 DISP_CC_MDSS_DPTX0_AUX_CLK>, + <&dispcc0 DISP_CC_MDSS_DPTX0_LINK_CLK>, + <&dispcc0 DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>, + <&dispcc0 DISP_CC_MDSS_DPTX0_PIXEL0_CLK>; + clock-names = "core_iface", "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel"; + + assigned-clocks = <&dispcc0 DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>, + <&dispcc0 DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>; + assigned-clock-parents = <&usb_0_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; + + phys = <&usb_0_qmpphy QMP_USB43DP_DP_PHY>; + phy-names = "dp"; + + #sound-dai-cells = <0>; + + operating-points-v2 = <&mdss0_dp0_opp_table>; + power-domains = <&rpmhpd SC8280XP_CX>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss0_dp0_in: endpoint { + remote-endpoint = <&mdss0_intf0_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss0_dp0_out: endpoint { + }; + }; + }; + + mdss0_dp0_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss0_dp1: displayport-controller@ae98000 { + compatible = "qcom,sc8280xp-dp"; + reg = <0 0xae98000 0 0x200>, + <0 0xae98200 0 0x200>, + <0 0xae98400 0 0x600>, + <0 0xae99000 0 0x400>, + <0 0xae99400 0 0x400>; + interrupt-parent = <&mdss0>; + interrupts = <13>; + clocks = <&dispcc0 DISP_CC_MDSS_AHB_CLK>, + <&dispcc0 DISP_CC_MDSS_DPTX1_AUX_CLK>, + <&dispcc0 DISP_CC_MDSS_DPTX1_LINK_CLK>, + <&dispcc0 DISP_CC_MDSS_DPTX1_LINK_INTF_CLK>, + <&dispcc0 DISP_CC_MDSS_DPTX1_PIXEL0_CLK>; + clock-names = "core_iface", "core_aux", + "ctrl_link", + "ctrl_link_iface", "stream_pixel"; + + assigned-clocks = <&dispcc0 DISP_CC_MDSS_DPTX1_LINK_CLK_SRC>, + <&dispcc0 DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>; + assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; + + phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>; + phy-names = "dp"; + + #sound-dai-cells = <0>; + + operating-points-v2 = <&mdss0_dp1_opp_table>; + power-domains = <&rpmhpd SC8280XP_CX>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss0_dp1_in: endpoint { + remote-endpoint = <&mdss0_intf4_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss0_dp1_out: endpoint { + }; + }; + }; + + mdss0_dp1_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss0_dp2: displayport-controller@ae9a000 { + compatible = "qcom,sc8280xp-dp"; + reg = <0 0xae9a000 0 0x200>, + <0 0xae9a200 0 0x200>, + <0 0xae9a400 0 0x600>, + <0 0xae9b000 0 0x400>, + <0 0xae9b400 0 0x400>; + + clocks = <&dispcc0 DISP_CC_MDSS_AHB_CLK>, + <&dispcc0 DISP_CC_MDSS_DPTX2_AUX_CLK>, + <&dispcc0 DISP_CC_MDSS_DPTX2_LINK_CLK>, + <&dispcc0 DISP_CC_MDSS_DPTX2_LINK_INTF_CLK>, + <&dispcc0 DISP_CC_MDSS_DPTX2_PIXEL0_CLK>; + clock-names = "core_iface", "core_aux", + "ctrl_link", + "ctrl_link_iface", "stream_pixel"; + interrupt-parent = <&mdss0>; + interrupts = <14>; + phys = <&mdss0_dp2_phy>; + phy-names = "dp"; + power-domains = <&rpmhpd SC8280XP_MMCX>; + + assigned-clocks = <&dispcc0 DISP_CC_MDSS_DPTX2_LINK_CLK_SRC>, + <&dispcc0 DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC>; + assigned-clock-parents = <&mdss0_dp2_phy 0>, <&mdss0_dp2_phy 1>; + operating-points-v2 = <&mdss0_dp2_opp_table>; + + #sound-dai-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss0_dp2_in: endpoint { + remote-endpoint = <&mdss0_intf6_out>; + }; + }; + + port@1 { + reg = <1>; + }; + }; + + mdss0_dp2_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss0_dp3: displayport-controller@aea0000 { + compatible = "qcom,sc8280xp-dp"; + reg = <0 0xaea0000 0 0x200>, + <0 0xaea0200 0 0x200>, + <0 0xaea0400 0 0x600>, + <0 0xaea1000 0 0x400>, + <0 0xaea1400 0 0x400>; + + clocks = <&dispcc0 DISP_CC_MDSS_AHB_CLK>, + <&dispcc0 DISP_CC_MDSS_DPTX3_AUX_CLK>, + <&dispcc0 DISP_CC_MDSS_DPTX3_LINK_CLK>, + <&dispcc0 DISP_CC_MDSS_DPTX3_LINK_INTF_CLK>, + <&dispcc0 DISP_CC_MDSS_DPTX3_PIXEL0_CLK>; + clock-names = "core_iface", "core_aux", + "ctrl_link", + "ctrl_link_iface", "stream_pixel"; + interrupt-parent = <&mdss0>; + interrupts = <15>; + phys = <&mdss0_dp3_phy>; + phy-names = "dp"; + power-domains = <&rpmhpd SC8280XP_MMCX>; + + assigned-clocks = <&dispcc0 DISP_CC_MDSS_DPTX3_LINK_CLK_SRC>, + <&dispcc0 DISP_CC_MDSS_DPTX3_PIXEL0_CLK_SRC>; + assigned-clock-parents = <&mdss0_dp3_phy 0>, <&mdss0_dp3_phy 1>; + operating-points-v2 = <&mdss0_dp3_opp_table>; + + #sound-dai-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss0_dp3_in: endpoint { + remote-endpoint = <&mdss0_intf5_out>; + }; + }; + + port@1 { + reg = <1>; + }; + }; + + mdss0_dp3_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; }; }; + mdss0_dp2_phy: phy@aec2a00 { + compatible = "qcom,sc8280xp-dp-phy"; + reg = <0 0x0aec2a00 0 0x19c>, + <0 0x0aec2200 0 0xec>, + <0 0x0aec2600 0 0xec>, + <0 0x0aec2000 0 0x1c8>; + + clocks = <&dispcc0 DISP_CC_MDSS_DPTX2_AUX_CLK>, + <&dispcc0 DISP_CC_MDSS_AHB_CLK>; + clock-names = "aux", "cfg_ahb"; + power-domains = <&rpmhpd SC8280XP_MX>; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + + mdss0_dp3_phy: phy@aec5a00 { + compatible = "qcom,sc8280xp-dp-phy"; + reg = <0 0x0aec5a00 0 0x19c>, + <0 0x0aec5200 0 0xec>, + <0 0x0aec5600 0 0xec>, + <0 0x0aec5000 0 0x1c8>; + + clocks = <&dispcc0 DISP_CC_MDSS_DPTX3_AUX_CLK>, + <&dispcc0 DISP_CC_MDSS_AHB_CLK>; + clock-names = "aux", "cfg_ahb"; + power-domains = <&rpmhpd SC8280XP_MX>; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + + dispcc0: clock-controller@af00000 { + compatible = "qcom,sc8280xp-dispcc0"; + reg = <0 0x0af00000 0 0x20000>; + + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&sleep_clk>, + <&usb_0_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>, + <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>, + <&mdss0_dp2_phy 0>, + <&mdss0_dp2_phy 1>, + <&mdss0_dp3_phy 0>, + <&mdss0_dp3_phy 1>, + <0>, + <0>, + <0>, + <0>; + power-domains = <&rpmhpd SC8280XP_MMCX>; + + #clock-cells = <1>; + #power-domain-cells = <1>; + #reset-cells = <1>; + + status = "disabled"; + }; + pdc: interrupt-controller@b220000 { compatible = "qcom,sc8280xp-pdc", "qcom,pdc"; reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>; @@ -2056,7 +3676,7 @@ #thermal-sensor-cells = <1>; }; - aoss_qmp: power-controller@c300000 { + aoss_qmp: power-management@c300000 { compatible = "qcom,sc8280xp-aoss-qmp", "qcom,aoss-qmp"; reg = <0 0x0c300000 0 0x400>; interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP IRQ_TYPE_EDGE_RISING>; @@ -2082,8 +3702,8 @@ interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; qcom,ee = <0>; qcom,channel = <0>; - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <0>; interrupt-controller; #interrupt-cells = <4>; }; @@ -2591,6 +4211,479 @@ qcom,remote-pid = <12>; }; }; + + mdss1: display-subsystem@22000000 { + compatible = "qcom,sc8280xp-mdss"; + reg = <0 0x22000000 0 0x1000>; + reg-names = "mdss"; + + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&dispcc1 DISP_CC_MDSS_AHB_CLK>, + <&dispcc1 DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", + "ahb", + "core"; + interconnects = <&mmss_noc MASTER_MDP_CORE1_0 0 &mc_virt SLAVE_EBI1 0>, + <&mmss_noc MASTER_MDP_CORE1_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "mdp0-mem", "mdp1-mem"; + interrupts = <GIC_SPI 865 IRQ_TYPE_LEVEL_HIGH>; + + iommus = <&apps_smmu 0x1800 0x402>; + power-domains = <&dispcc1 MDSS_GDSC>; + resets = <&dispcc1 DISP_CC_MDSS_CORE_BCR>; + + interrupt-controller; + #interrupt-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + mdss1_mdp: display-controller@22001000 { + compatible = "qcom,sc8280xp-dpu"; + reg = <0 0x22001000 0 0x8f000>, + <0 0x220b0000 0 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc1 DISP_CC_MDSS_AHB_CLK>, + <&dispcc1 DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc1 DISP_CC_MDSS_MDP_CLK>, + <&dispcc1 DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", + "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + interrupt-parent = <&mdss1>; + interrupts = <0>; + power-domains = <&rpmhpd SC8280XP_MMCX>; + + assigned-clocks = <&dispcc1 DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + operating-points-v2 = <&mdss1_mdp_opp_table>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss1_intf0_out: endpoint { + remote-endpoint = <&mdss1_dp0_in>; + }; + }; + + port@4 { + reg = <4>; + mdss1_intf4_out: endpoint { + remote-endpoint = <&mdss1_dp1_in>; + }; + }; + + port@5 { + reg = <5>; + mdss1_intf5_out: endpoint { + remote-endpoint = <&mdss1_dp3_in>; + }; + }; + + port@6 { + reg = <6>; + mdss1_intf6_out: endpoint { + remote-endpoint = <&mdss1_dp2_in>; + }; + }; + }; + + mdss1_mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-375000000 { + opp-hz = /bits/ 64 <375000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + required-opps = <&rpmhpd_opp_turbo_l1>; + }; + }; + }; + + mdss1_dp0: displayport-controller@22090000 { + compatible = "qcom,sc8280xp-dp"; + reg = <0 0x22090000 0 0x200>, + <0 0x22090200 0 0x200>, + <0 0x22090400 0 0x600>, + <0 0x22091000 0 0x400>, + <0 0x22091400 0 0x400>; + + clocks = <&dispcc1 DISP_CC_MDSS_AHB_CLK>, + <&dispcc1 DISP_CC_MDSS_DPTX0_AUX_CLK>, + <&dispcc1 DISP_CC_MDSS_DPTX0_LINK_CLK>, + <&dispcc1 DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>, + <&dispcc1 DISP_CC_MDSS_DPTX0_PIXEL0_CLK>; + clock-names = "core_iface", "core_aux", + "ctrl_link", + "ctrl_link_iface", "stream_pixel"; + interrupt-parent = <&mdss1>; + interrupts = <12>; + phys = <&mdss1_dp0_phy>; + phy-names = "dp"; + power-domains = <&rpmhpd SC8280XP_MMCX>; + + assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>, + <&dispcc1 DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>; + assigned-clock-parents = <&mdss1_dp0_phy 0>, <&mdss1_dp0_phy 1>; + operating-points-v2 = <&mdss1_dp0_opp_table>; + + #sound-dai-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss1_dp0_in: endpoint { + remote-endpoint = <&mdss1_intf0_out>; + }; + }; + + port@1 { + reg = <1>; + }; + }; + + mdss1_dp0_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + + }; + + mdss1_dp1: displayport-controller@22098000 { + compatible = "qcom,sc8280xp-dp"; + reg = <0 0x22098000 0 0x200>, + <0 0x22098200 0 0x200>, + <0 0x22098400 0 0x600>, + <0 0x22099000 0 0x400>, + <0 0x22099400 0 0x400>; + + clocks = <&dispcc1 DISP_CC_MDSS_AHB_CLK>, + <&dispcc1 DISP_CC_MDSS_DPTX1_AUX_CLK>, + <&dispcc1 DISP_CC_MDSS_DPTX1_LINK_CLK>, + <&dispcc1 DISP_CC_MDSS_DPTX1_LINK_INTF_CLK>, + <&dispcc1 DISP_CC_MDSS_DPTX1_PIXEL0_CLK>; + clock-names = "core_iface", "core_aux", + "ctrl_link", + "ctrl_link_iface", "stream_pixel"; + interrupt-parent = <&mdss1>; + interrupts = <13>; + phys = <&mdss1_dp1_phy>; + phy-names = "dp"; + power-domains = <&rpmhpd SC8280XP_MMCX>; + + assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX1_LINK_CLK_SRC>, + <&dispcc1 DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>; + assigned-clock-parents = <&mdss1_dp1_phy 0>, <&mdss1_dp1_phy 1>; + operating-points-v2 = <&mdss1_dp1_opp_table>; + + #sound-dai-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss1_dp1_in: endpoint { + remote-endpoint = <&mdss1_intf4_out>; + }; + }; + + port@1 { + reg = <1>; + }; + }; + + mdss1_dp1_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss1_dp2: displayport-controller@2209a000 { + compatible = "qcom,sc8280xp-dp"; + reg = <0 0x2209a000 0 0x200>, + <0 0x2209a200 0 0x200>, + <0 0x2209a400 0 0x600>, + <0 0x2209b000 0 0x400>, + <0 0x2209b400 0 0x400>; + + clocks = <&dispcc1 DISP_CC_MDSS_AHB_CLK>, + <&dispcc1 DISP_CC_MDSS_DPTX2_AUX_CLK>, + <&dispcc1 DISP_CC_MDSS_DPTX2_LINK_CLK>, + <&dispcc1 DISP_CC_MDSS_DPTX2_LINK_INTF_CLK>, + <&dispcc1 DISP_CC_MDSS_DPTX2_PIXEL0_CLK>; + clock-names = "core_iface", "core_aux", + "ctrl_link", + "ctrl_link_iface", "stream_pixel"; + interrupt-parent = <&mdss1>; + interrupts = <14>; + phys = <&mdss1_dp2_phy>; + phy-names = "dp"; + power-domains = <&rpmhpd SC8280XP_MMCX>; + + assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX2_LINK_CLK_SRC>, + <&dispcc1 DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC>; + assigned-clock-parents = <&mdss1_dp2_phy 0>, <&mdss1_dp2_phy 1>; + operating-points-v2 = <&mdss1_dp2_opp_table>; + + #sound-dai-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss1_dp2_in: endpoint { + remote-endpoint = <&mdss1_intf6_out>; + }; + }; + + port@1 { + reg = <1>; + }; + }; + + mdss1_dp2_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss1_dp3: displayport-controller@220a0000 { + compatible = "qcom,sc8280xp-dp"; + reg = <0 0x220a0000 0 0x200>, + <0 0x220a0200 0 0x200>, + <0 0x220a0400 0 0x600>, + <0 0x220a1000 0 0x400>, + <0 0x220a1400 0 0x400>; + + clocks = <&dispcc1 DISP_CC_MDSS_AHB_CLK>, + <&dispcc1 DISP_CC_MDSS_DPTX3_AUX_CLK>, + <&dispcc1 DISP_CC_MDSS_DPTX3_LINK_CLK>, + <&dispcc1 DISP_CC_MDSS_DPTX3_LINK_INTF_CLK>, + <&dispcc1 DISP_CC_MDSS_DPTX3_PIXEL0_CLK>; + clock-names = "core_iface", "core_aux", + "ctrl_link", + "ctrl_link_iface", "stream_pixel"; + interrupt-parent = <&mdss1>; + interrupts = <15>; + phys = <&mdss1_dp3_phy>; + phy-names = "dp"; + power-domains = <&rpmhpd SC8280XP_MMCX>; + + assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX3_LINK_CLK_SRC>, + <&dispcc1 DISP_CC_MDSS_DPTX3_PIXEL0_CLK_SRC>; + assigned-clock-parents = <&mdss1_dp3_phy 0>, <&mdss1_dp3_phy 1>; + operating-points-v2 = <&mdss1_dp3_opp_table>; + + #sound-dai-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss1_dp3_in: endpoint { + remote-endpoint = <&mdss1_intf5_out>; + }; + }; + + port@1 { + reg = <1>; + }; + }; + + mdss1_dp3_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + }; + + mdss1_dp2_phy: phy@220c2a00 { + compatible = "qcom,sc8280xp-dp-phy"; + reg = <0 0x220c2a00 0 0x19c>, + <0 0x220c2200 0 0xec>, + <0 0x220c2600 0 0xec>, + <0 0x220c2000 0 0x1c8>; + + clocks = <&dispcc1 DISP_CC_MDSS_DPTX2_AUX_CLK>, + <&dispcc1 DISP_CC_MDSS_AHB_CLK>; + clock-names = "aux", "cfg_ahb"; + power-domains = <&rpmhpd SC8280XP_MX>; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + + mdss1_dp3_phy: phy@220c5a00 { + compatible = "qcom,sc8280xp-dp-phy"; + reg = <0 0x220c5a00 0 0x19c>, + <0 0x220c5200 0 0xec>, + <0 0x220c5600 0 0xec>, + <0 0x220c5000 0 0x1c8>; + + clocks = <&dispcc1 DISP_CC_MDSS_DPTX3_AUX_CLK>, + <&dispcc1 DISP_CC_MDSS_AHB_CLK>; + clock-names = "aux", "cfg_ahb"; + power-domains = <&rpmhpd SC8280XP_MX>; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + + dispcc1: clock-controller@22100000 { + compatible = "qcom,sc8280xp-dispcc1"; + reg = <0 0x22100000 0 0x20000>; + + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <0>, + <&mdss1_dp0_phy 0>, + <&mdss1_dp0_phy 1>, + <&mdss1_dp1_phy 0>, + <&mdss1_dp1_phy 1>, + <&mdss1_dp2_phy 0>, + <&mdss1_dp2_phy 1>, + <&mdss1_dp3_phy 0>, + <&mdss1_dp3_phy 1>, + <0>, + <0>, + <0>, + <0>; + power-domains = <&rpmhpd SC8280XP_MMCX>; + + #clock-cells = <1>; + #power-domain-cells = <1>; + #reset-cells = <1>; + + status = "disabled"; + }; + }; + + sound: sound { }; thermal-zones { diff --git a/arch/arm64/boot/dts/qcom/sdm450-motorola-ali.dts b/arch/arm64/boot/dts/qcom/sdm450-motorola-ali.dts new file mode 100644 index 000000000000..362be5719dd2 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm450-motorola-ali.dts @@ -0,0 +1,252 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Julian Braha <julianbraha@gmail.com> + */ +/dts-v1/; + +#include "msm8953.dtsi" +#include "pm8953.dtsi" +#include "pmi8950.dtsi" + +/delete-node/ &qseecom_mem; + +/ { + model = "Motorola Moto G6"; + compatible = "motorola,ali", "qcom,sdm450"; + chassis-type = "handset"; + qcom,msm-id = <338 0>; + qcom,board-id = <0x43 0xc200>; + + gpio-keys { + compatible = "gpio-keys"; + + key-volume-up { + label = "volume_up"; + gpios = <&tlmm 85 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + }; + + reserved-memory { + qseecom_mem: qseecom@84300000 { + reg = <0x0 0x84300000 0x0 0x2000000>; + no-map; + }; + + ramoops@ef000000 { + compatible = "ramoops"; + reg = <0x0 0xef000000 0x0 0xc0000>; + console-size = <0x40000>; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-always-on; + regulator-boot-on; + }; +}; + +&hsusb_phy { + vdd-supply = <&pm8953_l3>; + vdda-pll-supply = <&pm8953_l7>; + vdda-phy-dpdm-supply = <&pm8953_l13>; + + status = "okay"; +}; + +&i2c_3 { + status = "okay"; + + touchscreen@38 { + compatible = "edt,edt-ft5406"; + reg = <0x38>; + interrupt-parent = <&tlmm>; + interrupts = <65 IRQ_TYPE_EDGE_FALLING>; + vcc-supply = <&pm8953_l10>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_active &ts_reset_active>; + + reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>; + touchscreen-size-x = <1080>; + touchscreen-size-y = <2160>; + }; +}; + +&pm8953_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&pmi8950_wled { + qcom,num-strings = <3>; + qcom,external-pfet; + qcom,cabc; + + status = "okay"; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-pm8953-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_l1-supply = <&pm8953_s3>; + vdd_l2_l3-supply = <&pm8953_s3>; + vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>; + vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>; + vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>; + + pm8953_s1: s1 { + regulator-min-microvolt = <795000>; + regulator-max-microvolt = <1081000>; + }; + + pm8953_s3: s3 { + regulator-min-microvolt = <1224000>; + regulator-max-microvolt = <1224000>; + }; + + pm8953_s4: s4 { + regulator-min-microvolt = <1900000>; + regulator-max-microvolt = <2050000>; + }; + + pm8953_l1: l1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1100000>; + }; + + pm8953_l2: l2 { + regulator-min-microvolt = <975000>; + regulator-max-microvolt = <1225000>; + }; + + pm8953_l3: l3 { + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <925000>; + }; + + pm8953_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8953_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8953_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1900000>; + }; + + pm8953_l8: l8 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + }; + + pm8953_l9: l9 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; + + pm8953_l10: l10 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8953_l11: l11 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + pm8953_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8953_l13: l13 { + regulator-min-microvolt = <3125000>; + regulator-max-microvolt = <3125000>; + }; + + pm8953_l16: l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8953_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8953_l19: l19 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1350000>; + }; + + pm8953_l22: l22 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2850000>; + }; + + pm8953_l23: l23 { + regulator-min-microvolt = <975000>; + regulator-max-microvolt = <1225000>; + }; + }; +}; + +&sdhc_1 { + vmmc-supply = <&pm8953_l8>; + vqmmc-supply = <&pm8953_l5>; + + status = "okay"; +}; + +&sdhc_2 { + vmmc-supply = <&pm8953_l11>; + vqmmc-supply = <&pm8953_l12>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_off>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <95 5>, <111 1>, <126 1>; + + ts_int_active: ts-int-active-state { + pins = "gpio65"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + ts_reset_active: ts-reset-active-state { + pins = "gpio64"; + function = "gpio"; + drive-strength = <0x08>; + bias-pull-up; + }; +}; + +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + dr_mode = "peripheral"; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges-kirin.dts b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges-kirin.dts index 71b448978e88..9425b2d9536e 100644 --- a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges-kirin.dts +++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges-kirin.dts @@ -21,6 +21,11 @@ }; }; +/* Reserve a bigger chunk of RAM for the higher-res display */ +&cont_splash_mem { + reg = <0 0x9d400000 0 (2520 * 1080 * 4)>; +}; + /* Ganges devices feature a Novatek touchscreen instead. */ /delete-node/ &touchscreen; /delete-node/ &vreg_l18a_1v8; diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi index 3d2b08d551d0..e52580acd5c8 100644 --- a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi @@ -57,7 +57,7 @@ regulator-boot-on; }; - cam_vdig_imx300_219_vreg: cam_vdig_imx300_219_vreg { + cam_vdig_imx300_219_vreg: cam-vdig-imx300-219-regulator { compatible = "regulator-fixed"; regulator-name = "cam_vdig_imx300_219_vreg"; startup-delay-us = <0>; @@ -67,7 +67,7 @@ pinctrl-0 = <&cam_vdig_default>; }; - cam_vana_front_vreg: cam_vana_front_vreg { + cam_vana_front_vreg: cam-vana-front-regulator { compatible = "regulator-fixed"; regulator-name = "cam_vana_front_vreg"; startup-delay-us = <0>; @@ -77,7 +77,7 @@ pinctrl-0 = <&imx219_vana_default>; }; - cam_vana_rear_vreg: cam_vana_rear_vreg { + cam_vana_rear_vreg: cam-vana-rear-regulator { compatible = "regulator-fixed"; regulator-name = "cam_vana_rear_vreg"; startup-delay-us = <0>; @@ -133,15 +133,20 @@ status = "okay"; }; - debug_region@ffb00000 { + debug@ffb00000 { reg = <0x00 0xffb00000 0x00 0x100000>; no-map; }; - removed_region@85800000 { + reserved@85800000 { reg = <0x00 0x85800000 0x00 0x3700000>; no-map; }; + + cont_splash_mem: splash@9d400000 { + reg = <0 0x9d400000 0 (1920 * 1080 * 4)>; + no-map; + }; }; /* diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi index 13e6a4fbba27..5827cda270a0 100644 --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi @@ -678,7 +678,7 @@ mnoc: interconnect@1745000 { compatible = "qcom,sdm660-mnoc"; - reg = <0x01745000 0xA010>; + reg = <0x01745000 0xa010>; #interconnect-cells = <1>; clock-names = "bus", "bus_a", "iface"; clocks = <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK>, @@ -1044,43 +1044,43 @@ opp-hz = /bits/ 64 <775000000>; opp-level = <RPM_SMD_LEVEL_TURBO>; opp-peak-kBps = <5412000>; - opp-supported-hw = <0xA2>; + opp-supported-hw = <0xa2>; }; opp-647000000 { opp-hz = /bits/ 64 <647000000>; opp-level = <RPM_SMD_LEVEL_NOM_PLUS>; opp-peak-kBps = <4068000>; - opp-supported-hw = <0xFF>; + opp-supported-hw = <0xff>; }; opp-588000000 { opp-hz = /bits/ 64 <588000000>; opp-level = <RPM_SMD_LEVEL_NOM>; opp-peak-kBps = <3072000>; - opp-supported-hw = <0xFF>; + opp-supported-hw = <0xff>; }; opp-465000000 { opp-hz = /bits/ 64 <465000000>; opp-level = <RPM_SMD_LEVEL_SVS_PLUS>; opp-peak-kBps = <2724000>; - opp-supported-hw = <0xFF>; + opp-supported-hw = <0xff>; }; opp-370000000 { opp-hz = /bits/ 64 <370000000>; opp-level = <RPM_SMD_LEVEL_SVS>; opp-peak-kBps = <2188000>; - opp-supported-hw = <0xFF>; + opp-supported-hw = <0xff>; }; opp-240000000 { opp-hz = /bits/ 64 <240000000>; opp-level = <RPM_SMD_LEVEL_LOW_SVS>; opp-peak-kBps = <1648000>; - opp-supported-hw = <0xFF>; + opp-supported-hw = <0xff>; }; opp-160000000 { opp-hz = /bits/ 64 <160000000>; opp-level = <RPM_SMD_LEVEL_MIN_SVS>; opp-peak-kBps = <1200000>; - opp-supported-hw = <0xFF>; + opp-supported-hw = <0xff>; }; }; }; @@ -1470,7 +1470,7 @@ }; }; - mdss: mdss@c900000 { + mdss: display-subsystem@c900000 { compatible = "qcom,mdss"; reg = <0x0c900000 0x1000>, <0x0c9b0000 0x1040>; @@ -1497,8 +1497,8 @@ ranges; status = "disabled"; - mdp: mdp@c901000 { - compatible = "qcom,mdp5"; + mdp: display-controller@c901000 { + compatible = "qcom,sdm630-mdp5", "qcom,mdp5"; reg = <0x0c901000 0x89000>; reg-names = "mdp_phys"; @@ -1572,7 +1572,8 @@ }; dsi0: dsi@c994000 { - compatible = "qcom,mdss-dsi-ctrl"; + compatible = "qcom,sdm660-dsi-ctrl", + "qcom,mdss-dsi-ctrl"; reg = <0x0c994000 0x400>; reg-names = "dsi_ctrl"; @@ -2409,7 +2410,7 @@ type = "passive"; }; - cpu0_crit: cpu_crit { + cpu0_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -2430,7 +2431,7 @@ type = "passive"; }; - cpu1_crit: cpu_crit { + cpu1_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -2451,7 +2452,7 @@ type = "passive"; }; - cpu2_crit: cpu_crit { + cpu2_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -2472,7 +2473,7 @@ type = "passive"; }; - cpu3_crit: cpu_crit { + cpu3_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -2499,7 +2500,7 @@ type = "passive"; }; - pwr_cluster_crit: cpu_crit { + pwr_cluster_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; diff --git a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts index 3fb513cad0a9..70e683b7e4fc 100644 --- a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts +++ b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts @@ -63,6 +63,21 @@ }; }; +&i2c_5 { + status = "okay"; + + nfc@28 { + compatible = "nxp,nq310", "nxp,nxp-nci-i2c"; + reg = <0x28>; + + interrupt-parent = <&tlmm>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH>; + + enable-gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>; + firmware-gpios = <&tlmm 62 GPIO_ACTIVE_HIGH>; + }; +}; + &pm8953_resin { status = "okay"; linux,code = <KEY_VOLUMEDOWN>; diff --git a/arch/arm64/boot/dts/qcom/sdm632-motorola-ocean.dts b/arch/arm64/boot/dts/qcom/sdm632-motorola-ocean.dts new file mode 100644 index 000000000000..c82d6e628d2c --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm632-motorola-ocean.dts @@ -0,0 +1,291 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Gabriela David + */ +/dts-v1/; + +#include "sdm632.dtsi" +#include "pm8953.dtsi" +#include <dt-bindings/leds/common.h> + +/delete-node/ &cont_splash_mem; +/delete-node/ &qseecom_mem; + +/ { + model = "Motorola G7 Power"; + compatible = "motorola,ocean", "qcom,sdm632"; + chassis-type = "handset"; + qcom,msm-id = <349 0>; + qcom,board-id = <0x141 0xc100>; + qcom,pmic-id = <0x10016 0x25 0x00 0x00>; + + backlight: backlight { + compatible = "led-backlight"; + leds = <&led>; + }; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer@90001000 { + compatible = "simple-framebuffer"; + reg = <0 0x90001000 0 (720 * 1520 * 3)>; + + width = <720>; + height = <1520>; + stride = <(720 * 3)>; + format = "r8g8b8"; + + power-domains = <&gcc MDSS_GDSC>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>, + <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_BYTE0_CLK>, + <&gcc GCC_MDSS_PCLK0_CLK>, + <&gcc GCC_MDSS_ESC0_CLK>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_key_default>; + + key-volume-up { + label = "Volume Up"; + gpios = <&tlmm 85 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + }; + + reserved-memory { + qseecom_mem: qseecom@84300000 { + reg = <0x0 0x84300000 0x0 0x2000000>; + no-map; + }; + + cont_splash_mem: cont-splash@90001000 { + reg = <0x0 0x90001000 0x0 (720 * 1520 * 3)>; + no-map; + }; + + reserved@eefa1800 { + reg = <0x00 0xeefa1800 0x00 0x5e800>; + no-map; + }; + + ramoops@ef000000 { + compatible = "ramoops"; + reg = <0x0 0xef000000 0x0 0xbf800>; + console-size = <0x40000>; + pmsg-size = <0x40000>; + record-size = <0x3f800>; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-always-on; + regulator-boot-on; + }; +}; + +&hsusb_phy { + vdd-supply = <&pm8953_l3>; + vdda-pll-supply = <&pm8953_l7>; + vdda-phy-dpdm-supply = <&pm8953_l13>; + + status = "okay"; +}; + +&i2c_3 { + status = "okay"; + + touchscreen@41 { + compatible = "ilitek,ili2117"; + reg = <0x41>; + + interrupt-parent = <&tlmm>; + interrupts = <65 IRQ_TYPE_EDGE_FALLING>; + + touchscreen-inverted-x; + }; +}; + +&i2c_5 { + status = "okay"; + + led-controller@36 { + compatible = "ti,lm3697"; + reg = <0x36>; + + #address-cells = <1>; + #size-cells = <0>; + + led: led@1 { + reg = <1>; + default-trigger = "backlight"; + function = LED_FUNCTION_BACKLIGHT; + led-sources = <0 1 2>; + }; + }; +}; + +&pm8953_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-pm8953-regulators"; + + vdd_l1-supply = <&pm8953_s3>; + vdd_l2_l3-supply = <&pm8953_s3>; + vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>; + vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>; + vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>; + + pm8953_s3: s3 { + regulator-min-microvolt = <984000>; + regulator-max-microvolt = <1240000>; + }; + + pm8953_s4: s4 { + regulator-min-microvolt = <1036000>; + regulator-max-microvolt = <2040000>; + }; + + pm8953_l1: l1 { + regulator-min-microvolt = <975000>; + regulator-max-microvolt = <1050000>; + }; + + pm8953_l2: l2 { + regulator-min-microvolt = <975000>; + regulator-max-microvolt = <1175000>; + }; + + pm8953_l3: l3 { + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <925000>; + regulator-allow-set-load; + }; + + pm8953_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8953_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8953_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1900000>; + }; + + pm8953_l8: l8 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + }; + + pm8953_l9: l9 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; + + pm8953_l10: l10 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3000000>; + }; + + pm8953_l11: l11 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + pm8953_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8953_l13: l13 { + regulator-min-microvolt = <3125000>; + regulator-max-microvolt = <3125000>; + }; + + pm8953_l16: l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8953_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8953_l18: l18 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2700000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8953_l19: l19 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1350000>; + }; + + pm8953_l22: l22 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + pm8953_l23: l23 { + regulator-min-microvolt = <975000>; + regulator-max-microvolt = <1225000>; + }; + }; +}; + +&sdhc_1 { + vmmc-supply = <&pm8953_l8>; + vqmmc-supply = <&pm8953_l5>; + + status = "okay"; +}; + +&sdhc_2 { + vmmc-supply = <&pm8953_l11>; + vqmmc-supply = <&pm8953_l12>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <96 4>; +}; + +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + dr_mode = "peripheral"; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm660.dtsi b/arch/arm64/boot/dts/qcom/sdm660.dtsi index d52123cb5cd3..f0f27fc12c18 100644 --- a/arch/arm64/boot/dts/qcom/sdm660.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm660.dtsi @@ -37,35 +37,35 @@ opp-hz = /bits/ 64 <700000000>; opp-level = <RPM_SMD_LEVEL_TURBO>; opp-peak-kBps = <5184000>; - opp-supported-hw = <0xFF>; + opp-supported-hw = <0xff>; }; opp-647000000 { opp-hz = /bits/ 64 <647000000>; opp-level = <RPM_SMD_LEVEL_NOM_PLUS>; opp-peak-kBps = <4068000>; - opp-supported-hw = <0xFF>; + opp-supported-hw = <0xff>; }; opp-588000000 { opp-hz = /bits/ 64 <588000000>; opp-level = <RPM_SMD_LEVEL_NOM>; opp-peak-kBps = <3072000>; - opp-supported-hw = <0xFF>; + opp-supported-hw = <0xff>; }; opp-465000000 { opp-hz = /bits/ 64 <465000000>; opp-level = <RPM_SMD_LEVEL_SVS_PLUS>; opp-peak-kBps = <2724000>; - opp-supported-hw = <0xFF>; + opp-supported-hw = <0xff>; }; opp-370000000 { opp-hz = /bits/ 64 <370000000>; opp-level = <RPM_SMD_LEVEL_SVS>; opp-peak-kBps = <2188000>; - opp-supported-hw = <0xFF>; + opp-supported-hw = <0xff>; }; */ @@ -73,14 +73,14 @@ opp-hz = /bits/ 64 <266000000>; opp-level = <RPM_SMD_LEVEL_LOW_SVS>; opp-peak-kBps = <1648000>; - opp-supported-hw = <0xFF>; + opp-supported-hw = <0xff>; }; opp-160000000 { opp-hz = /bits/ 64 <160000000>; opp-level = <RPM_SMD_LEVEL_MIN_SVS>; opp-peak-kBps = <1200000>; - opp-supported-hw = <0xFF>; + opp-supported-hw = <0xff>; }; }; }; @@ -142,6 +142,8 @@ }; &mdp { + compatible = "qcom,sdm660-mdp5", "qcom,mdp5"; + ports { port@1 { reg = <1>; @@ -154,7 +156,8 @@ &mdss { dsi1: dsi@c996000 { - compatible = "qcom,mdss-dsi-ctrl"; + compatible = "qcom,sdm660-dsi-ctrl", + "qcom,mdss-dsi-ctrl"; reg = <0x0c996000 0x400>; reg-names = "dsi_ctrl"; diff --git a/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts b/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts index cf2ae540db12..e3e61b9d1b9d 100644 --- a/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts +++ b/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts @@ -256,6 +256,7 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-enable-ramp-delay = <250>; + regulator-always-on; }; vreg_l9a_1p8: ldo9 { diff --git a/arch/arm64/boot/dts/qcom/sdm670.dtsi b/arch/arm64/boot/dts/qcom/sdm670.dtsi index 47363fde64ac..02f14692dd9d 100644 --- a/arch/arm64/boot/dts/qcom/sdm670.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm670.dtsi @@ -401,6 +401,18 @@ #power-domain-cells = <1>; }; + qfprom: qfprom@784000 { + compatible = "qcom,sdm670-qfprom", "qcom,qfprom"; + reg = <0 0x00784000 0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + qusb2_hstx_trim: hstx-trim@1eb { + reg = <0x1eb 0x1>; + bits = <1 4>; + }; + }; + sdhc_1: mmc@7c4000 { compatible = "qcom,sdm670-sdhci", "qcom,sdhci-msm-v5"; reg = <0 0x007c4000 0 0x1000>, @@ -776,6 +788,55 @@ }; }; + mem_noc: interconnect@1380000 { + compatible = "qcom,sdm670-mem-noc"; + reg = <0 0x01380000 0 0x27200>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + dc_noc: interconnect@14e0000 { + compatible = "qcom,sdm670-dc-noc"; + reg = <0 0x014e0000 0 0x400>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + config_noc: interconnect@1500000 { + compatible = "qcom,sdm670-config-noc"; + reg = <0 0x01500000 0 0x5080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system_noc: interconnect@1620000 { + compatible = "qcom,sdm670-system-noc"; + reg = <0 0x01620000 0 0x18080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre1_noc: interconnect@16e0000 { + compatible = "qcom,sdm670-aggre1-noc"; + reg = <0 0x016e0000 0 0x15080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre2_noc: interconnect@1700000 { + compatible = "qcom,sdm670-aggre2-noc"; + reg = <0 0x01700000 0 0x1f300>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mmss_noc: interconnect@1740000 { + compatible = "qcom,sdm670-mmss-noc"; + reg = <0 0x01740000 0 0x1c100>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + tlmm: pinctrl@3400000 { compatible = "qcom,sdm670-tlmm"; reg = <0 0x03400000 0 0xc00000>; @@ -928,6 +989,8 @@ resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + nvmem-cells = <&qusb2_hstx_trim>; + status = "disabled"; }; @@ -1069,6 +1132,13 @@ <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>; }; + gladiator_noc: interconnect@17900000 { + compatible = "qcom,sdm670-gladiator-noc"; + reg = <0 0x17900000 0 0xd080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + apps_rsc: rsc@179c0000 { compatible = "qcom,rpmh-rsc"; reg = <0 0x179c0000 0 0x10000>, diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi index ca676e04687b..f2b48241d15c 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi @@ -339,7 +339,7 @@ &apps_rsc { - pm8998-rpmh-regulators { + regulators-0 { compatible = "qcom,pm8998-rpmh-regulators"; qcom,pmic-id = "a"; @@ -621,7 +621,7 @@ }; }; - pm8005-rpmh-regulators { + regulators-1 { compatible = "qcom,pm8005-rpmh-regulators"; qcom,pmic-id = "c"; @@ -756,8 +756,8 @@ ap_ts_i2c: &i2c14 { }; &ipa { + qcom,gsi-loader = "modem"; status = "okay"; - modem-init; }; &lpasscc { @@ -862,7 +862,7 @@ ap_ts_i2c: &i2c14 { pinctrl-0 = <&qup_uart6_4pin>; - bluetooth: wcn3990-bt { + bluetooth: bluetooth { compatible = "qcom,wcn3990-bt"; vddio-supply = <&src_pp1800_s4a>; vddxo-supply = <&pp1800_l7a_wcn3990>; @@ -995,108 +995,73 @@ ap_ts_i2c: &i2c14 { /* PINCTRL - additions to nodes defined in sdm845.dtsi */ &qspi_cs0 { - pinconf { - pins = "gpio90"; - bias-disable; - }; + bias-disable; }; &qspi_clk { - pinconf { - pins = "gpio95"; - bias-disable; - }; + bias-disable; }; &qspi_data01 { - pinconf { - pins = "gpio91", "gpio92"; - - /* High-Z when no transfers; nice to park the lines */ - bias-pull-up; - }; + /* High-Z when no transfers; nice to park the lines */ + bias-pull-up; }; &qup_i2c3_default { - pinconf { - pins = "gpio41", "gpio42"; - drive-strength = <2>; + drive-strength = <2>; - /* Has external pullup */ - bias-disable; - }; + /* Has external pullup */ + bias-disable; }; &qup_i2c11_default { - pinconf { - pins = "gpio31", "gpio32"; - drive-strength = <2>; + drive-strength = <2>; - /* Has external pullup */ - bias-disable; - }; + /* Has external pullup */ + bias-disable; }; &qup_i2c12_default { - pinconf { - pins = "gpio49", "gpio50"; - drive-strength = <2>; + drive-strength = <2>; - /* Has external pullup */ - bias-disable; - }; + /* Has external pullup */ + bias-disable; }; &qup_i2c14_default { - pinconf { - pins = "gpio33", "gpio34"; - drive-strength = <2>; + drive-strength = <2>; - /* Has external pullup */ - bias-disable; - }; + /* Has external pullup */ + bias-disable; }; &qup_spi0_default { - pinconf { - pins = "gpio0", "gpio1", "gpio2", "gpio3"; - drive-strength = <2>; - bias-disable; - }; + drive-strength = <2>; + bias-disable; }; &qup_spi5_default { - pinconf { - pins = "gpio85", "gpio86", "gpio87", "gpio88"; - drive-strength = <2>; - bias-disable; - }; + drive-strength = <2>; + bias-disable; }; &qup_spi10_default { - pinconf { - pins = "gpio53", "gpio54", "gpio55", "gpio56"; - drive-strength = <2>; - bias-disable; - }; + drive-strength = <2>; + bias-disable; }; -&qup_uart9_default { - pinconf-tx { - pins = "gpio4"; - drive-strength = <2>; - bias-disable; - }; +&qup_uart9_rx { + drive-strength = <2>; + bias-pull-up; +}; - pinconf-rx { - pins = "gpio5"; - drive-strength = <2>; - bias-pull-up; - }; +&qup_uart9_tx { + drive-strength = <2>; + bias-disable; }; /* PINCTRL - board-specific pinctrl */ -&pm8005_gpio { +&pm8005_gpios { gpio-line-names = "", "", "SLB", @@ -1130,7 +1095,7 @@ ap_ts_i2c: &i2c14 { }; }; -&pm8998_gpio { +&pm8998_gpios { gpio-line-names = "", "", "SW_CTRL", @@ -1180,243 +1145,153 @@ ap_ts_i2c: &i2c14 { output-low; }; - ap_edp_bklten: ap-edp-bklten { - pinmux { - pins = "gpio37"; - function = "gpio"; - }; - - pinconf { - pins = "gpio37"; - drive-strength = <2>; - bias-disable; - }; + ap_edp_bklten: ap-edp-bklten-state { + pins = "gpio37"; + function = "gpio"; + drive-strength = <2>; + bias-disable; }; - bios_flash_wp_r_l: bios-flash-wp-r-l { - pinmux { - pins = "gpio128"; - function = "gpio"; - input-enable; - }; - - pinconf { - pins = "gpio128"; - bias-disable; - }; + bios_flash_wp_r_l: bios-flash-wp-r-l-state { + pins = "gpio128"; + function = "gpio"; + input-enable; + bias-disable; }; - ec_ap_int_l: ec-ap-int-l { - pinmux { - pins = "gpio122"; - function = "gpio"; - input-enable; - }; - - pinconf { - pins = "gpio122"; - bias-pull-up; - }; + ec_ap_int_l: ec-ap-int-l-state { + pins = "gpio122"; + function = "gpio"; + input-enable; + bias-pull-up; }; - edp_brij_en: edp-brij-en { - pinmux { - pins = "gpio102"; - function = "gpio"; - }; - - pinconf { - pins = "gpio102"; - drive-strength = <2>; - bias-disable; - }; + edp_brij_en: edp-brij-en-state { + pins = "gpio102"; + function = "gpio"; + drive-strength = <2>; + bias-disable; }; - edp_brij_irq: edp-brij-irq { - pinmux { - pins = "gpio10"; - function = "gpio"; - }; - - pinconf { - pins = "gpio10"; - drive-strength = <2>; - bias-pull-down; - }; + edp_brij_irq: edp-brij-irq-state { + pins = "gpio10"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; }; - en_pp3300_dx_edp: en-pp3300-dx-edp { - pinmux { - pins = "gpio43"; - function = "gpio"; - }; - - pinconf { - pins = "gpio43"; - drive-strength = <2>; - bias-disable; - }; + en_pp3300_dx_edp: en-pp3300-dx-edp-state { + pins = "gpio43"; + function = "gpio"; + drive-strength = <2>; + bias-disable; }; - h1_ap_int_odl: h1-ap-int-odl { - pinmux { - pins = "gpio129"; - function = "gpio"; - input-enable; - }; - - pinconf { - pins = "gpio129"; - bias-pull-up; - }; + h1_ap_int_odl: h1-ap-int-odl-state { + pins = "gpio129"; + function = "gpio"; + input-enable; + bias-pull-up; }; - pen_eject_odl: pen-eject-odl { - pinmux { - pins = "gpio119"; - function = "gpio"; - bias-pull-up; - }; + pen_eject_odl: pen-eject-odl-state { + pins = "gpio119"; + function = "gpio"; + bias-pull-up; }; - pen_irq_l: pen-irq-l { - pinmux { - pins = "gpio24"; - function = "gpio"; - }; + pen_irq_l: pen-irq-l-state { + pins = "gpio24"; + function = "gpio"; - pinconf { - pins = "gpio24"; - - /* Has external pullup */ - bias-disable; - }; + /* Has external pullup */ + bias-disable; }; - pen_pdct_l: pen-pdct-l { - pinmux { - pins = "gpio63"; - function = "gpio"; - }; - - pinconf { - pins = "gpio63"; + pen_pdct_l: pen-pdct-l-state { + pins = "gpio63"; + function = "gpio"; - /* Has external pullup */ - bias-disable; - }; + /* Has external pullup */ + bias-disable; }; - pen_rst_l: pen-rst-l { - pinmux { - pins = "gpio23"; - function = "gpio"; - }; - - pinconf { - pins = "gpio23"; - bias-disable; - drive-strength = <2>; + pen_rst_l: pen-rst-l-state { + pins = "gpio23"; + function = "gpio"; + bias-disable; + drive-strength = <2>; - /* - * The pen driver doesn't currently support - * driving this reset line. By specifying - * output-high here we're relying on the fact - * that this pin has a default pulldown at boot - * (which makes sure the pen was in reset if it - * was powered) and then we set it high here to - * take it out of reset. Better would be if the - * pen driver could control this and we could - * remove "output-high" here. - */ - output-high; - }; + /* + * The pen driver doesn't currently support + * driving this reset line. By specifying + * output-high here we're relying on the fact + * that this pin has a default pulldown at boot + * (which makes sure the pen was in reset if it + * was powered) and then we set it high here to + * take it out of reset. Better would be if the + * pen driver could control this and we could + * remove "output-high" here. + */ + output-high; }; - sdc2_clk: sdc2-clk { - pinconf { - pins = "sdc2_clk"; - bias-disable; + sdc2_clk: sdc2-clk-state { + pins = "sdc2_clk"; + bias-disable; - /* - * It seems that mmc_test reports errors if drive - * strength is not 16. - */ - drive-strength = <16>; - }; + /* + * It seems that mmc_test reports errors if drive + * strength is not 16. + */ + drive-strength = <16>; }; - sdc2_cmd: sdc2-cmd { - pinconf { - pins = "sdc2_cmd"; - bias-pull-up; - drive-strength = <16>; - }; + sdc2_cmd: sdc2-cmd-state { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <16>; }; - sdc2_data: sdc2-data { - pinconf { - pins = "sdc2_data"; - bias-pull-up; - drive-strength = <16>; - }; + sdc2_data: sdc2-data-state { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <16>; }; - sd_cd_odl: sd-cd-odl { - pinmux { - pins = "gpio44"; - function = "gpio"; - }; - - pinconf { - pins = "gpio44"; - bias-pull-up; - }; + sd_cd_odl: sd-cd-odl-state { + pins = "gpio44"; + function = "gpio"; + bias-pull-up; }; - ts_int_l: ts-int-l { - pinmux { - pins = "gpio125"; - function = "gpio"; - }; - - pinconf { - pins = "gpio125"; - bias-pull-up; - }; + ts_int_l: ts-int-l-state { + pins = "gpio125"; + function = "gpio"; + bias-pull-up; }; - ts_reset_l: ts-reset-l { - pinmux { - pins = "gpio118"; - function = "gpio"; - }; - - pinconf { - pins = "gpio118"; - bias-disable; - drive-strength = <2>; - }; + ts_reset_l: ts-reset-l-state { + pins = "gpio118"; + function = "gpio"; + bias-disable; + drive-strength = <2>; }; - ap_suspend_l_assert: ap_suspend_l_assert { - config { - pins = "gpio126"; - function = "gpio"; - bias-disable; - drive-strength = <2>; - output-low; - }; + ap_suspend_l_assert: ap-suspend-l-assert-state { + pins = "gpio126"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + output-low; }; - ap_suspend_l_deassert: ap_suspend_l_deassert { - config { - pins = "gpio126"; - function = "gpio"; - bias-disable; - drive-strength = <2>; - output-high; - }; + ap_suspend_l_deassert: ap-suspend-l-deassert-state { + pins = "gpio126"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + output-high; }; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts index f41c6d600ea8..d4866feef2c4 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts @@ -11,6 +11,7 @@ #include <dt-bindings/sound/qcom,q6afe.h> #include <dt-bindings/sound/qcom,q6asm.h> #include "sdm845.dtsi" +#include "sdm845-wcd9340.dtsi" #include "pm8998.dtsi" #include "pmi8998.dtsi" @@ -54,7 +55,7 @@ key-vol-up { label = "Volume Up"; linux,code = <KEY_VOLUMEUP>; - gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; + gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>; }; }; @@ -65,7 +66,7 @@ label = "green:user4"; function = LED_FUNCTION_INDICATOR; color = <LED_COLOR_ID_GREEN>; - gpios = <&pm8998_gpio 13 GPIO_ACTIVE_HIGH>; + gpios = <&pm8998_gpios 13 GPIO_ACTIVE_HIGH>; linux,default-trigger = "panic-indicator"; default-state = "off"; }; @@ -74,7 +75,7 @@ label = "yellow:wlan"; function = LED_FUNCTION_WLAN; color = <LED_COLOR_ID_YELLOW>; - gpios = <&pm8998_gpio 9 GPIO_ACTIVE_HIGH>; + gpios = <&pm8998_gpios 9 GPIO_ACTIVE_HIGH>; linux,default-trigger = "phy0tx"; default-state = "off"; }; @@ -83,7 +84,7 @@ label = "blue:bt"; function = LED_FUNCTION_BLUETOOTH; color = <LED_COLOR_ID_BLUE>; - gpios = <&pm8998_gpio 5 GPIO_ACTIVE_HIGH>; + gpios = <&pm8998_gpios 5 GPIO_ACTIVE_HIGH>; linux,default-trigger = "bluetooth-power"; default-state = "off"; }; @@ -142,32 +143,32 @@ */ }; - cam0_dvdd_1v2: reg_cam0_dvdd_1v2 { + cam0_dvdd_1v2: cam0-dvdd-1v2-regulator { compatible = "regulator-fixed"; regulator-name = "CAM0_DVDD_1V2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; enable-active-high; - gpio = <&pm8998_gpio 12 GPIO_ACTIVE_HIGH>; + gpio = <&pm8998_gpios 12 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&cam0_dvdd_1v2_en_default>; vin-supply = <&vbat>; }; - cam0_avdd_2v8: reg_cam0_avdd_2v8 { + cam0_avdd_2v8: cam0-avdd-2v8-regulator { compatible = "regulator-fixed"; regulator-name = "CAM0_AVDD_2V8"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; enable-active-high; - gpio = <&pm8998_gpio 10 GPIO_ACTIVE_HIGH>; + gpio = <&pm8998_gpios 10 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&cam0_avdd_2v8_en_default>; vin-supply = <&vbat>; }; /* This regulator is enabled when the VREG_LVS1A_1P8 trace is enabled */ - cam3_avdd_2v8: reg_cam3_avdd_2v8 { + cam3_avdd_2v8: cam3-avdd-2v8-regulator { compatible = "regulator-fixed"; regulator-name = "CAM3_AVDD_2V8"; regulator-min-microvolt = <2800000>; @@ -269,7 +270,7 @@ }; &apps_rsc { - pm8998-rpmh-regulators { + regulators-0 { compatible = "qcom,pm8998-rpmh-regulators"; qcom,pmic-id = "a"; vdd-s1-supply = <&vph_pwr>; @@ -394,7 +395,7 @@ }; }; - pmi8998-rpmh-regulators { + regulators-1 { compatible = "qcom,pmi8998-rpmh-regulators"; qcom,pmic-id = "b"; @@ -506,14 +507,12 @@ &i2c11 { /* On Low speed expansion */ clock-frequency = <100000>; - label = "LS-I2C1"; status = "okay"; }; &i2c14 { /* On Low speed expansion */ clock-frequency = <100000>; - label = "LS-I2C0"; status = "okay"; }; @@ -559,7 +558,7 @@ vdda-pll-supply = <&vreg_l26a_1p2>; }; -&pm8998_gpio { +&pm8998_gpios { gpio-line-names = "NC", "NC", @@ -615,14 +614,9 @@ }; }; -&pm8998_pon { - resin { - compatible = "qcom,pm8941-resin"; - interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; - debounce = <15625>; - bias-pull-up; - linux,code = <KEY_VOLUMEDOWN>; - }; +&pm8998_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; }; &pmi8998_lpg { @@ -709,7 +703,7 @@ }; &sound { - compatible = "qcom,db845c-sndcard"; + compatible = "qcom,db845c-sndcard", "qcom,sdm845-sndcard"; pinctrl-0 = <&quat_mi2s_active &quat_mi2s_sd0_active &quat_mi2s_sd1_active @@ -830,8 +824,8 @@ }; &tlmm { - cam0_default: cam0_default { - rst { + cam0_default: cam0-default-state { + rst-pins { pins = "gpio9"; function = "gpio"; @@ -839,7 +833,7 @@ bias-disable; }; - mclk0 { + mclk0-pins { pins = "gpio13"; function = "cam_mclk"; @@ -848,8 +842,8 @@ }; }; - cam3_default: cam3_default { - rst { + cam3_default: cam3-default-state { + rst-pins { function = "gpio"; pins = "gpio21"; @@ -857,7 +851,7 @@ bias-disable; }; - mclk3 { + mclk3-pins { function = "cam_mclk"; pins = "gpio16"; @@ -866,7 +860,7 @@ }; }; - dsi_sw_sel: dsi-sw-sel { + dsi_sw_sel: dsi-sw-sel-state { pins = "gpio120"; function = "gpio"; @@ -875,20 +869,20 @@ output-high; }; - lt9611_irq_pin: lt9611-irq { + lt9611_irq_pin: lt9611-irq-state { pins = "gpio84"; function = "gpio"; bias-disable; }; - pcie0_default_state: pcie0-default { - clkreq { + pcie0_default_state: pcie0-default-state { + clkreq-pins { pins = "gpio36"; function = "pci_e0"; bias-pull-up; }; - reset-n { + reset-n-pins { pins = "gpio35"; function = "gpio"; @@ -897,7 +891,7 @@ bias-pull-down; }; - wake-n { + wake-n-pins { pins = "gpio37"; function = "gpio"; @@ -906,7 +900,7 @@ }; }; - pcie0_pwren_state: pcie0-pwren { + pcie0_pwren_state: pcie0-pwren-state { pins = "gpio90"; function = "gpio"; @@ -914,8 +908,8 @@ bias-disable; }; - pcie1_default_state: pcie1-default { - perst-n { + pcie1_default_state: pcie1-default-state { + perst-n-pins { pins = "gpio102"; function = "gpio"; @@ -923,13 +917,13 @@ bias-disable; }; - clkreq { + clkreq-pins { pins = "gpio103"; function = "pci_e1"; bias-pull-up; }; - wake-n { + wake-n-pins { pins = "gpio11"; function = "gpio"; @@ -937,7 +931,7 @@ bias-pull-up; }; - reset-n { + reset-n-pins { pins = "gpio75"; function = "gpio"; @@ -947,8 +941,8 @@ }; }; - sdc2_default_state: sdc2-default { - clk { + sdc2_default_state: sdc2-default-state { + clk-pins { pins = "sdc2_clk"; bias-disable; @@ -959,37 +953,30 @@ drive-strength = <16>; }; - cmd { + cmd-pins { pins = "sdc2_cmd"; bias-pull-up; drive-strength = <10>; }; - data { + data-pins { pins = "sdc2_data"; bias-pull-up; drive-strength = <10>; }; }; - sdc2_card_det_n: sd-card-det-n { + sdc2_card_det_n: sd-card-det-n-state { pins = "gpio126"; function = "gpio"; bias-pull-up; }; - - wcd_intr_default: wcd_intr_default { - pins = <54>; - function = "gpio"; - - input-enable; - bias-pull-down; - drive-strength = <2>; - }; }; &uart3 { label = "LS-UART0"; + pinctrl-0 = <&qup_uart3_4pin>; + status = "disabled"; }; @@ -1089,10 +1076,6 @@ }; &wcd9340 { - pinctrl-0 = <&wcd_intr_default>; - pinctrl-names = "default"; - clock-names = "extclk"; - clocks = <&rpmhcc RPMH_LN_BB_CLK2>; reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>; vdd-buck-supply = <&vreg_s4a_1p8>; vdd-buck-sido-supply = <&vreg_s4a_1p8>; @@ -1135,49 +1118,30 @@ /* PINCTRL - additions to nodes defined in sdm845.dtsi */ &qup_spi2_default { - pinconf { - pins = "gpio27", "gpio28", "gpio29", "gpio30"; - drive-strength = <16>; - }; -}; - -&qup_uart3_default { - pinmux { - pins = "gpio41", "gpio42", "gpio43", "gpio44"; - function = "qup3"; - }; + drive-strength = <16>; }; &qup_i2c10_default { - pinconf { - pins = "gpio55", "gpio56"; - drive-strength = <2>; - bias-disable; - }; + drive-strength = <2>; + bias-disable; }; -&qup_uart9_default { - pinconf-tx { - pins = "gpio4"; - drive-strength = <2>; - bias-disable; - }; +&qup_uart9_rx { + drive-strength = <2>; + bias-pull-up; +}; - pinconf-rx { - pins = "gpio5"; - drive-strength = <2>; - bias-pull-up; - }; +&qup_uart9_tx { + drive-strength = <2>; + bias-disable; }; -&pm8998_gpio { +&pm8998_gpios { }; /* PINCTRL - additions to nodes defined in sdm845.dtsi */ &qup_spi0_default { - config { - drive-strength = <6>; - bias-disable; - }; + drive-strength = <6>; + bias-disable; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi index 1eb423e4be24..f942c5afea9b 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi @@ -132,7 +132,7 @@ key-vol-up { label = "Volume up"; linux,code = <KEY_VOLUMEUP>; - gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; + gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>; }; }; @@ -166,7 +166,7 @@ }; &apps_rsc { - pm8998-rpmh-regulators { + regulators-0 { compatible = "qcom,pm8998-rpmh-regulators"; qcom,pmic-id = "a"; @@ -419,7 +419,7 @@ }; }; - pmi8998-rpmh-regulators { + regulators-1 { compatible = "qcom,pmi8998-rpmh-regulators"; qcom,pmic-id = "b"; @@ -433,7 +433,7 @@ }; }; - pm8005-rpmh-regulators { + regulators-2 { compatible = "qcom,pm8005-rpmh-regulators"; qcom,pmic-id = "c"; @@ -474,22 +474,17 @@ }; &ipa { + qcom,gsi-loader = "modem"; status = "okay"; - modem-init; }; &mss_pil { status = "okay"; }; -&pm8998_pon { - resin { - compatible = "qcom,pm8941-resin"; - interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; - debounce = <15625>; - bias-pull-up; - linux,code = <KEY_VOLUMEDOWN>; - }; +&pm8998_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; }; &sdhc_2 { @@ -558,52 +553,40 @@ &tlmm { gpio-reserved-ranges = <28 4>, <81 4>; - sdc2_clk: sdc2-clk { - pinconf { - pins = "sdc2_clk"; - bias-disable; - - /* - * It seems that mmc_test reports errors if drive - * strength is not 16 on clk, cmd, and data pins. - * - * TODO: copy-pasted from mtp, try other values - * on these devices. - */ - drive-strength = <16>; - }; + sdc2_clk: sdc2-clk-state { + pins = "sdc2_clk"; + bias-disable; + + /* + * It seems that mmc_test reports errors if drive + * strength is not 16 on clk, cmd, and data pins. + * + * TODO: copy-pasted from mtp, try other values + * on these devices. + */ + drive-strength = <16>; }; - sdc2_cmd: sdc2-cmd { - pinconf { - pins = "sdc2_cmd"; - bias-pull-up; - drive-strength = <16>; - }; + sdc2_cmd: sdc2-cmd-state { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <16>; }; - sdc2_data: sdc2-data { - pinconf { - pins = "sdc2_data"; - bias-pull-up; - drive-strength = <16>; - }; + sdc2_data: sdc2-data-state { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <16>; }; - sd_card_det_n: sd-card-det-n { - pinmux { - pins = "gpio126"; - function = "gpio"; - }; - - pinconf { - pins = "gpio126"; - bias-pull-up; - }; + sd_card_det_n: sd-card-det-n-state { + pins = "gpio126"; + function = "gpio"; + bias-pull-up; }; }; -&pm8998_gpio { +&pm8998_gpios { vol_up_pin_a: vol-up-active-state { pins = "gpio6"; function = "normal"; diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts b/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts index 7d967a104b3e..a12723310c8b 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts @@ -58,7 +58,7 @@ }; &tlmm { - thinq_key_default: thinq-key-default { + thinq_key_default: thinq-key-default-state { pins = "gpio89"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts index de2d10e0315a..d1440b790fa6 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts @@ -117,7 +117,7 @@ }; &apps_rsc { - pm8998-rpmh-regulators { + regulators-0 { compatible = "qcom,pm8998-rpmh-regulators"; qcom,pmic-id = "a"; @@ -382,7 +382,7 @@ }; }; - pmi8998-rpmh-regulators { + regulators-1 { compatible = "qcom,pmi8998-rpmh-regulators"; qcom,pmic-id = "b"; @@ -396,7 +396,7 @@ }; }; - pm8005-rpmh-regulators { + regulators-2 { compatible = "qcom,pm8005-rpmh-regulators"; qcom,pmic-id = "c"; @@ -518,8 +518,9 @@ }; &ipa { - status = "okay"; + qcom,gsi-loader = "self"; memory-region = <&ipa_fw_mem>; + status = "okay"; }; &mdss { @@ -719,68 +720,49 @@ /* PINCTRL - additions to nodes defined in sdm845.dtsi */ &qup_i2c10_default { - pinconf { - pins = "gpio55", "gpio56"; - drive-strength = <2>; - bias-disable; - }; + drive-strength = <2>; + bias-disable; }; -&qup_uart9_default { - pinconf-tx { - pins = "gpio4"; - drive-strength = <2>; - bias-disable; - }; +&qup_uart9_rx { + drive-strength = <2>; + bias-pull-up; +}; - pinconf-rx { - pins = "gpio5"; - drive-strength = <2>; - bias-pull-up; - }; +&qup_uart9_tx { + drive-strength = <2>; + bias-disable; }; &tlmm { gpio-reserved-ranges = <0 4>, <81 4>; - sdc2_clk: sdc2-clk { - pinconf { - pins = "sdc2_clk"; - bias-disable; + sdc2_clk: sdc2-clk-state { + pins = "sdc2_clk"; + bias-disable; - /* - * It seems that mmc_test reports errors if drive - * strength is not 16 on clk, cmd, and data pins. - */ - drive-strength = <16>; - }; + /* + * It seems that mmc_test reports errors if drive + * strength is not 16 on clk, cmd, and data pins. + */ + drive-strength = <16>; }; - sdc2_cmd: sdc2-cmd { - pinconf { - pins = "sdc2_cmd"; - bias-pull-up; - drive-strength = <16>; - }; + sdc2_cmd: sdc2-cmd-state { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <16>; }; - sdc2_data: sdc2-data { - pinconf { - pins = "sdc2_data"; - bias-pull-up; - drive-strength = <16>; - }; + sdc2_data: sdc2-data-state { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <16>; }; - sd_card_det_n: sd-card-det-n { - pinmux { - pins = "gpio126"; - function = "gpio"; - }; - - pinconf { - pins = "gpio126"; - bias-pull-up; - }; + sd_card_det_n: sd-card-det-n-state { + pins = "gpio126"; + function = "gpio"; + bias-pull-up; }; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi index 42cf4dd5ea28..64638ea94db7 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi @@ -9,8 +9,11 @@ #include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include <dt-bindings/sound/qcom,q6afe.h> +#include <dt-bindings/sound/qcom,q6asm.h> #include "sdm845.dtsi" +#include "sdm845-wcd9340.dtsi" #include "pm8998.dtsi" #include "pmi8998.dtsi" @@ -37,14 +40,14 @@ key-vol-down { label = "Volume down"; linux,code = <KEY_VOLUMEDOWN>; - gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>; + gpios = <&pm8998_gpios 5 GPIO_ACTIVE_LOW>; debounce-interval = <15>; }; key-vol-up { label = "Volume up"; linux,code = <KEY_VOLUMEUP>; - gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; + gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>; debounce-interval = <15>; }; }; @@ -145,7 +148,7 @@ }; &apps_rsc { - pm8998-rpmh-regulators { + regulators-0 { compatible = "qcom,pm8998-rpmh-regulators"; qcom,pmic-id = "a"; @@ -281,7 +284,7 @@ }; }; - pmi8998-rpmh-regulators { + regulators-1 { compatible = "qcom,pmi8998-rpmh-regulators"; qcom,pmic-id = "b"; @@ -295,7 +298,7 @@ }; }; - pm8005-rpmh-regulators { + regulators-2 { compatible = "qcom,pm8005-rpmh-regulators"; qcom,pmic-id = "c"; @@ -424,10 +427,10 @@ }; &ipa { - status = "okay"; - + qcom,gsi-loader = "self"; memory-region = <&ipa_fw_mem>; firmware-name = "qcom/sdm845/oneplus6/ipa_fws.mbn"; + status = "okay"; }; &mdss { @@ -440,7 +443,7 @@ firmware-name = "qcom/sdm845/oneplus6/mba.mbn", "qcom/sdm845/oneplus6/modem.mbn"; }; -&pm8998_gpio { +&pm8998_gpios { volume_down_gpio: pm8998-gpio5-state { pinconf { pins = "gpio5"; @@ -466,6 +469,44 @@ status = "okay"; }; +&q6afedai { + qi2s@22 { + reg = <22>; + qcom,sd-lines = <1>; + }; + + qi2s@23 { + reg = <23>; + qcom,sd-lines = <0>; + }; +}; + +&q6asmdai { + dai@0 { + reg = <0>; + }; + + dai@1 { + reg = <1>; + }; + + dai@2 { + reg = <2>; + }; + + dai@3 { + reg = <3>; + }; + + dai@4 { + reg = <4>; + }; + + dai@5 { + reg = <5>; + }; +}; + &qupv3_id_1 { status = "okay"; }; @@ -474,34 +515,158 @@ status = "okay"; }; +&qup_i2c10_default { + drive-strength = <2>; + bias-disable; +}; + &qup_i2c12_default { - mux { - pins = "gpio49", "gpio50"; - function = "qup12"; - drive-strength = <2>; - bias-disable; - }; + drive-strength = <2>; + bias-disable; }; -&qup_i2c10_default { - pinconf { - pins = "gpio55", "gpio56"; - drive-strength = <2>; - bias-disable; - }; +&qup_uart9_rx { + drive-strength = <2>; + bias-pull-up; }; -&qup_uart9_default { - pinconf-tx { - pins = "gpio4"; - drive-strength = <2>; - bias-disable; +&qup_uart9_tx { + drive-strength = <2>; + bias-disable; +}; + +&sound { + compatible = "qcom,sdm845-sndcard"; + pinctrl-0 = <&quat_mi2s_active &quat_mi2s_sd0_active &quat_mi2s_sd1_active>; + pinctrl-names = "default"; + status = "okay"; + + mm1-dai-link { + link-name = "MultiMedia1"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; }; - pinconf-rx { - pins = "gpio5"; - drive-strength = <2>; - bias-pull-up; + mm2-dai-link { + link-name = "MultiMedia2"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; + }; + }; + + mm3-dai-link { + link-name = "MultiMedia3"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; + }; + }; + + mm4-dai-link { + link-name = "MultiMedia4"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA4>; + }; + }; + + mm5-dai-link { + link-name = "MultiMedia5"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA5>; + }; + }; + + mm6-dai-link { + link-name = "MultiMedia6"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA6>; + }; + }; + + speaker_playback_dai: speaker-dai-link { + link-name = "Speaker Playback"; + cpu { + sound-dai = <&q6afedai QUATERNARY_MI2S_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + }; + + slim-dai-link { + link-name = "SLIM Playback 1"; + cpu { + sound-dai = <&q6afedai SLIMBUS_0_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9340 0>; + }; + }; + + slimcap-dai-link { + link-name = "SLIM Capture 1"; + cpu { + sound-dai = <&q6afedai SLIMBUS_0_TX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9340 1>; + }; + }; + + slim2-dai-link { + link-name = "SLIM Playback 2"; + cpu { + sound-dai = <&q6afedai SLIMBUS_1_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9340 2>; /* AIF2_PB */ + }; + }; + + slimcap2-dai-link { + link-name = "SLIM Capture 2"; + cpu { + sound-dai = <&q6afedai SLIMBUS_1_TX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9340 3>; /* AIF2_CAP */ + }; + }; + + slimcap3-dai-link { + link-name = "SLIM Capture 3"; + cpu { + sound-dai = <&q6afedai SLIMBUS_2_TX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9340 5>; /* AIF3_CAP */ + }; }; }; @@ -588,50 +753,50 @@ &tlmm { gpio-reserved-ranges = <0 4>, <81 4>; - tri_state_key_default: tri_state_key_default { - mux { - pins = "gpio40", "gpio42", "gpio26"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; + tri_state_key_default: tri-state-key-default-state { + pins = "gpio40", "gpio42", "gpio26"; + function = "gpio"; + drive-strength = <2>; + bias-disable; }; - ts_default_pins: ts-int { - mux { - pins = "gpio99", "gpio125"; - function = "gpio"; - drive-strength = <16>; - bias-pull-up; - }; + ts_default_pins: ts-int-state { + pins = "gpio99", "gpio125"; + function = "gpio"; + drive-strength = <16>; + bias-pull-up; }; - panel_reset_pins: panel-reset { - mux { - pins = "gpio6", "gpio25", "gpio26"; - function = "gpio"; - drive-strength = <8>; - bias-disable; - }; + panel_reset_pins: panel-reset-state { + pins = "gpio6", "gpio25", "gpio26"; + function = "gpio"; + drive-strength = <8>; + bias-disable; }; - panel_te_pin: panel-te { - mux { - pins = "gpio10"; - function = "mdp_vsync"; - drive-strength = <2>; - bias-disable; - input-enable; - }; + panel_te_pin: panel-te-state { + pins = "gpio10"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-disable; + input-enable; }; - panel_esd_pin: panel-esd { + panel_esd_pin: panel-esd-state { + pins = "gpio30"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + input-enable; + }; + + speaker_default: speaker-default-state { mux { - pins = "gpio30"; + pins = "gpio69"; function = "gpio"; - drive-strength = <2>; - bias-pull-down; - input-enable; + drive-strength = <16>; + bias-pull-up; + output-high; }; }; }; @@ -641,6 +806,17 @@ firmware-name = "qcom/sdm845/oneplus6/venus.mbn"; }; +&wcd9340 { + pinctrl-0 = <&wcd_intr_default>; + pinctrl-names = "default"; + reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>; + vdd-buck-supply = <&vreg_s4a_1p8>; + vdd-buck-sido-supply = <&vreg_s4a_1p8>; + vdd-tx-supply = <&vreg_s4a_1p8>; + vdd-rx-supply = <&vreg_s4a_1p8>; + vdd-io-supply = <&vreg_s4a_1p8>; +}; + &wifi { status = "okay"; vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts b/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts index bf2cf92e8976..6cdda971bb4b 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts @@ -32,3 +32,43 @@ &bq27441_fg { monitored-battery = <&battery>; }; + +&i2c4 { + status = "okay"; + + max98927_codec: max98927@3a { + compatible = "maxim,max98927"; + reg = <0x3a>; + #sound-dai-cells = <1>; + + pinctrl-0 = <&speaker_default>; + pinctrl-names = "default"; + + reset-gpios = <&tlmm 69 GPIO_ACTIVE_LOW>; + + vmon-slot-no = <1>; + imon-slot-no = <0>; + }; +}; + +&sound { + model = "OnePlus 6"; + audio-routing = "RX_BIAS", "MCLK", + "AMIC2", "MIC BIAS2", + "AMIC3", "MIC BIAS4", + "AMIC4", "MIC BIAS1", + "AMIC5", "MIC BIAS4"; +}; + +&speaker_playback_dai { + codec { + sound-dai = <&max98927_codec 0>; + }; +}; + +&wcd9340 { + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <2700000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts b/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts index 1b6b5bf368df..086d14e2de92 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts @@ -29,10 +29,39 @@ compatible = "samsung,s6e3fc2x01"; }; +&i2c4 { + /* nxp,tfa9894 @ 0x34 */ +}; + &bq27441_fg { monitored-battery = <&battery>; }; +&sound { + model = "OnePlus 6T"; + audio-routing = "RX_BIAS", "MCLK", + "AMIC1", "MIC BIAS3", + "AMIC2", "MIC BIAS2", + "AMIC3", "MIC BIAS4", + "AMIC4", "MIC BIAS1", + "AMIC5", "MIC BIAS3"; + +}; + +/* + * The TFA9894 codec is currently unsupported. + * We need to delete the node to allow the soundcard + * to probe for headphones/earpiece. + */ +/delete-node/ &speaker_playback_dai; + &rmi4_f12 { touchscreen-y-mm = <148>; }; + +&wcd9340 { + qcom,micbias1-microvolt = <2700000>; + qcom,micbias2-microvolt = <2700000>; + qcom,micbias3-microvolt = <2700000>; + qcom,micbias4-microvolt = <2700000>; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts index e742c27fe91f..d37a433130b9 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts @@ -73,7 +73,7 @@ &apps_rsc { - pm8998-rpmh-regulators { + regulators-0 { compatible = "qcom,pm8998-rpmh-regulators"; qcom,pmic-id = "a"; @@ -332,7 +332,7 @@ }; }; - pm8005-rpmh-regulators { + regulators-1 { compatible = "qcom,pm8005-rpmh-regulators"; qcom,pmic-id = "c"; diff --git a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts index bb77ccfdc68c..b54e304abf71 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts @@ -54,7 +54,7 @@ key-vol-up { label = "volume_up"; linux,code = <KEY_VOLUMEUP>; - gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; + gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>; debounce-interval = <15>; }; }; @@ -111,7 +111,7 @@ }; &apps_rsc { - pm8998-rpmh-regulators { + regulators-0 { compatible = "qcom,pm8998-rpmh-regulators"; qcom,pmic-id = "a"; @@ -376,7 +376,7 @@ }; }; - pmi8998-rpmh-regulators { + regulators-1 { compatible = "qcom,pmi8998-rpmh-regulators"; qcom,pmic-id = "b"; @@ -390,7 +390,7 @@ }; }; - pm8005-rpmh-regulators { + regulators-2 { compatible = "qcom,pm8005-rpmh-regulators"; qcom,pmic-id = "c"; @@ -495,10 +495,10 @@ }; &ipa { - status = "okay"; - + qcom,gsi-loader = "self"; memory-region = <&ipa_fw_mem>; firmware-name = "qcom/sdm845/axolotl/ipa_fws.mbn"; + status = "okay"; }; &mdss { @@ -510,7 +510,7 @@ firmware-name = "qcom/sdm845/axolotl/mba.mbn", "qcom/sdm845/axolotl/modem.mbn"; }; -&pm8998_gpio { +&pm8998_gpios { volume_up_gpio: pm8998-gpio6-state { pinconf { pins = "gpio6"; @@ -522,14 +522,9 @@ }; }; -&pm8998_pon { - volume_down_resin: resin { - compatible = "qcom,pm8941-resin"; - interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; - debounce = <15625>; - bias-pull-up; - linux,code = <KEY_VOLUMEDOWN>; - }; +&pm8998_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; }; &pmi8998_lpg { @@ -559,18 +554,14 @@ }; }; -&qup_uart9_default { - pinconf-rx { - pins = "gpio5"; - drive-strength = <2>; - bias-pull-up; - }; +&qup_uart9_rx { + drive-strength = <2>; + bias-pull-up; +}; - pinconf-tx { - pins = "gpio4"; - drive-strength = <2>; - bias-disable; - }; +&qup_uart9_tx { + drive-strength = <2>; + bias-disable; }; &qupv3_id_0 { @@ -584,110 +575,62 @@ &tlmm { gpio-reserved-ranges = <0 4>, <81 4>; - sde_dsi_active: sde-dsi-active { - mux { - pins = "gpio6", "gpio11"; - function = "gpio"; - }; - - config { - pins = "gpio6", "gpio11"; - drive-strength = <8>; - bias-disable; - }; + sde_dsi_active: sde-dsi-active-state { + pins = "gpio6", "gpio11"; + function = "gpio"; + drive-strength = <8>; + bias-disable; }; - sde_dsi_suspend: sde-dsi-suspend { - mux { - pins = "gpio6", "gpio11"; - function = "gpio"; - }; - - config { - pins = "gpio6", "gpio11"; - drive-strength = <2>; - bias-pull-down; - }; + sde_dsi_suspend: sde-dsi-suspend-state { + pins = "gpio6", "gpio11"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; }; - sde_te_active: sde-te-active { - mux { - pins = "gpio10"; - function = "mdp_vsync"; - }; - - config { - pins = "gpio10"; - drive-strength = <2>; - bias-pull-down; - }; + sde_te_active: sde-te-active-state { + pins = "gpio10"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; }; - sde_te_suspend: sde-te-suspend { - mux { - pins = "gpio10"; - function = "mdp_vsync"; - }; - - config { - pins = "gpio10"; - drive-strength = <2>; - bias-pull-down; - }; + sde_te_suspend: sde-te-suspend-state { + pins = "gpio10"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; }; - ts_int_active: ts-int-active { - mux { - pins = "gpio125"; - function = "gpio"; - }; - - config { - pins = "gpio125"; - drive-strength = <8>; - bias-pull-up; - input-enable; - }; + ts_int_active: ts-int-active-state { + pins = "gpio125"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + input-enable; }; - ts_int_suspend: ts-int-suspend { - mux { - pins = "gpio125"; - function = "gpio"; - }; - - config { - pins = "gpio125"; - drive-strength = <2>; - bias-pull-down; - input-enable; - }; + ts_int_suspend: ts-int-suspend-state { + pins = "gpio125"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + input-enable; }; - ts_reset_active: ts-reset-active { - mux { - pins = "gpio99"; - function = "gpio"; - }; - - config { - pins = "gpio99"; - drive-strength = <8>; - bias-pull-up; - }; + ts_reset_active: ts-reset-active-state { + pins = "gpio99"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; }; - ts_reset_suspend: ts-reset-suspend { - mux { - pins = "gpio99"; - function = "gpio"; - }; - - config { - pins = "gpio99"; - drive-strength = <2>; - bias-pull-down; - }; + ts_reset_suspend: ts-reset-suspend-state { + pins = "gpio99"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; }; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi index 87dd0fc36747..4984c7496c31 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi @@ -4,6 +4,7 @@ */ #include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "sdm845.dtsi" #include "pm8005.dtsi" @@ -17,14 +18,43 @@ gpio-keys { compatible = "gpio-keys"; - /* Neither Camera Focus, nor Camera Shutter seem to work... */ + pinctrl-0 = <&focus_n &snapshot_n &vol_down_n &vol_up_n>; + pinctrl-names = "default"; - key-vol-down { - label = "volume_down"; - gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>; + key-camera-focus { + label = "Camera Focus"; + gpios = <&pm8998_gpios 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_CAMERA_FOCUS>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + + key-camera-snapshot { + label = "Camera Snapshot"; + gpios = <&pm8998_gpios 7 GPIO_ACTIVE_LOW>; + linux,code = <KEY_CAMERA>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + + key-volume-down { + label = "Volume Down"; + gpios = <&pm8998_gpios 5 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; debounce-interval = <15>; - gpio-key,wakeup; + linux,can-disable; + wakeup-source; + }; + + key-volume-up { + label = "Volume Up"; + gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; }; }; @@ -69,7 +99,7 @@ }; &apps_rsc { - pm8998-rpmh-regulators { + regulators-0 { compatible = "qcom,pm8998-rpmh-regulators"; qcom,pmic-id = "a"; @@ -299,7 +329,7 @@ }; }; - pmi8998-rpmh-regulators { + regulators-1 { compatible = "qcom,pmi8998-rpmh-regulators"; qcom,pmic-id = "b"; @@ -310,7 +340,7 @@ }; }; - pm8005-rpmh-regulators { + regulators-2 { compatible = "qcom,pm8005-rpmh-regulators"; qcom,pmic-id = "c"; @@ -358,6 +388,40 @@ /* AMS TCS3490 RGB+IR color sensor @ 72 */ }; +&pm8998_gpios { + focus_n: focus-n-state { + pins = "gpio2"; + function = PMIC_GPIO_FUNC_NORMAL; + power-source = <0>; + bias-pull-up; + input-enable; + }; + + vol_down_n: vol-down-n-state { + pins = "gpio5"; + function = PMIC_GPIO_FUNC_NORMAL; + power-source = <0>; + bias-pull-up; + input-enable; + }; + + vol_up_n: vol-up-n-state { + pins = "gpio6"; + function = PMIC_GPIO_FUNC_NORMAL; + power-source = <0>; + bias-pull-up; + input-enable; + }; + + snapshot_n: snapshot-n-state { + pins = "gpio7"; + function = PMIC_GPIO_FUNC_NORMAL; + power-source = <0>; + bias-pull-up; + input-enable; + }; +}; + &qupv3_id_0 { status = "okay"; }; @@ -383,19 +447,19 @@ gpio-reserved-ranges = <0 4>, <81 4>; sdc2_default_state: sdc2-default-state { - clk { + clk-pins { pins = "sdc2_clk"; drive-strength = <16>; bias-disable; }; - cmd { + cmd-pins { pins = "sdc2_cmd"; drive-strength = <10>; bias-pull-up; }; - data { + data-pins { pins = "sdc2_data"; drive-strength = <10>; bias-pull-up; diff --git a/arch/arm64/boot/dts/qcom/sdm845-wcd9340.dtsi b/arch/arm64/boot/dts/qcom/sdm845-wcd9340.dtsi new file mode 100644 index 000000000000..0d7c37f39176 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-wcd9340.dtsi @@ -0,0 +1,87 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SDM845 SoC device tree source + * + * Copyright (c) 2018, The Linux Foundation. All rights reserved. + */ + +&slim { + status = "okay"; + + slim@1 { + reg = <1>; + #address-cells = <2>; + #size-cells = <0>; + + wcd9340_ifd: ifd@0,0 { + compatible = "slim217,250"; + reg = <0 0>; + }; + + wcd9340: codec@1,0 { + compatible = "slim217,250"; + reg = <1 0>; + slim-ifc-dev = <&wcd9340_ifd>; + + #sound-dai-cells = <1>; + + interrupts-extended = <&tlmm 54 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + clock-names = "extclk"; + clocks = <&rpmhcc RPMH_LN_BB_CLK2>; + + #clock-cells = <0>; + clock-frequency = <9600000>; + clock-output-names = "mclk"; + + pinctrl-0 = <&wcd_intr_default>; + pinctrl-names = "default"; + + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + + #address-cells = <1>; + #size-cells = <1>; + + wcdgpio: gpio-controller@42 { + compatible = "qcom,wcd9340-gpio"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x42 0x2>; + }; + + swm: swm@c85 { + compatible = "qcom,soundwire-v1.3.0"; + reg = <0xc85 0x40>; + interrupts-extended = <&wcd9340 20>; + + qcom,dout-ports = <6>; + qcom,din-ports = <2>; + qcom,ports-sinterval-low = /bits/ 8 <0x07 0x1f 0x3f 0x7 0x1f 0x3f 0x0f 0x0f>; + qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0c 0x6 0x12 0x0d 0x07 0x0a>; + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x1f 0x00 0x00 0x1f 0x00 0x00>; + + #sound-dai-cells = <1>; + clocks = <&wcd9340>; + clock-names = "iface"; + #address-cells = <2>; + #size-cells = <0>; + }; + }; + }; +}; + +&tlmm { + wcd_intr_default: wcd-intr-default-state { + pins = "gpio54"; + function = "gpio"; + + input-enable; + bias-pull-down; + drive-strength = <2>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi index eb6b2b676eca..e0fda4d754fe 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi @@ -7,6 +7,7 @@ #include <dt-bindings/sound/qcom,q6afe.h> #include <dt-bindings/sound/qcom,q6asm.h> #include "sdm845.dtsi" +#include "sdm845-wcd9340.dtsi" #include "pm8998.dtsi" #include "pmi8998.dtsi" @@ -46,7 +47,7 @@ key-vol-up { label = "Volume Up"; linux,code = <KEY_VOLUMEUP>; - gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; + gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>; }; }; @@ -97,6 +98,12 @@ no-map; }; + /* Cont splash region set up by the bootloader */ + cont_splash_mem: framebuffer@9d400000 { + reg = <0 0x9d400000 0 0x2400000>; + no-map; + }; + rmtfs_mem: memory@f6301000 { compatible = "qcom,rmtfs-mem"; reg = <0 0xf6301000 0 0x200000>; @@ -123,7 +130,7 @@ }; &apps_rsc { - pm8998-rpmh-regulators { + regulators-0 { compatible = "qcom,pm8998-rpmh-regulators"; qcom,pmic-id = "a"; @@ -299,12 +306,13 @@ }; &ipa { - status = "okay"; + qcom,gsi-loader = "self"; memory-region = <&ipa_fw_mem>; firmware-name = "qcom/sdm845/beryllium/ipa_fws.mbn"; + status = "okay"; }; -&pm8998_gpio { +&pm8998_gpios { vol_up_pin_a: vol-up-active-state { pins = "gpio6"; function = "normal"; @@ -325,14 +333,9 @@ qcom,cabc; }; -&pm8998_pon { - resin { - compatible = "qcom,pm8941-resin"; - interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; - debounce = <15625>; - bias-pull-up; - linux,code = <KEY_VOLUMEDOWN>; - }; +&pm8998_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; }; &pmi8998_rradc { @@ -379,7 +382,7 @@ }; &sound { - compatible = "qcom,db845c-sndcard"; + compatible = "qcom,db845c-sndcard", "qcom,sdm845-sndcard"; pinctrl-0 = <&quat_mi2s_active &quat_mi2s_sd0_active>; pinctrl-names = "default"; @@ -445,40 +448,31 @@ &tlmm { gpio-reserved-ranges = <0 4>, <81 4>; - sdc2_default_state: sdc2-default { - clk { + sdc2_default_state: sdc2-default-state { + clk-pins { pins = "sdc2_clk"; bias-disable; drive-strength = <16>; }; - cmd { + cmd-pins { pins = "sdc2_cmd"; bias-pull-up; drive-strength = <10>; }; - data { + data-pins { pins = "sdc2_data"; bias-pull-up; drive-strength = <10>; }; }; - sdc2_card_det_n: sd-card-det-n { + sdc2_card_det_n: sd-card-det-n-state { pins = "gpio126"; function = "gpio"; bias-pull-up; }; - - wcd_intr_default: wcd_intr_default { - pins = <54>; - function = "gpio"; - - input-enable; - bias-pull-down; - drive-strength = <2>; - }; }; &uart6 { @@ -546,11 +540,7 @@ firmware-name = "qcom/sdm845/beryllium/venus.mbn"; }; -&wcd9340{ - pinctrl-0 = <&wcd_intr_default>; - pinctrl-names = "default"; - clock-names = "extclk"; - clocks = <&rpmhcc RPMH_LN_BB_CLK2>; +&wcd9340 { reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>; vdd-buck-supply = <&vreg_s4a_1p8>; vdd-buck-sido-supply = <&vreg_s4a_1p8>; diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts index 38ba809a95cd..1b7fdbae6a2b 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts @@ -13,6 +13,7 @@ #include <dt-bindings/sound/qcom,q6afe.h> #include <dt-bindings/sound/qcom,q6asm.h> #include "sdm845.dtsi" +#include "sdm845-wcd9340.dtsi" #include "pm8998.dtsi" #include "pmi8998.dtsi" #include "pm8005.dtsi" @@ -55,7 +56,7 @@ key-vol-up { label = "Volume Up"; linux,code = <KEY_VOLUMEUP>; - gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; + gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>; debounce-interval = <15>; }; }; @@ -143,7 +144,7 @@ }; &apps_rsc { - pm8998-rpmh-regulators { + regulators-0 { compatible = "qcom,pm8998-rpmh-regulators"; qcom,pmic-id = "a"; @@ -343,7 +344,7 @@ }; }; - pmi8998-rpmh-regulators { + regulators-1 { compatible = "qcom,pmi8998-rpmh-regulators"; qcom,pmic-id = "b"; @@ -355,7 +356,7 @@ }; }; - pm8005-rpmh-regulators { + regulators-2 { compatible = "qcom,pm8005-rpmh-regulators"; qcom,pmic-id = "c"; @@ -449,6 +450,7 @@ }; &ipa { + qcom,gsi-loader = "self"; memory-region = <&ipa_fw_mem>; firmware-name = "qcom/sdm845/polaris/ipa_fws.mbn"; status = "okay"; @@ -518,7 +520,7 @@ status = "okay"; }; -&pm8998_gpio { +&pm8998_gpios { volume_up_gpio: pm8998-gpio6-state { pinconf { qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; @@ -530,14 +532,9 @@ }; }; -&pm8998_pon { - resin { - interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; - compatible = "qcom,pm8941-resin"; - linux,code = <KEY_VOLUMEDOWN>; - debounce = <15625>; - bias-pull-up; - }; +&pm8998_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; }; &q6afedai { @@ -570,24 +567,21 @@ }; &qup_i2c14_default { - pinconf { - pins = "gpio33", "gpio34"; - drive-strength = <2>; - bias-disable; - }; + drive-strength = <2>; + bias-disable; }; &tlmm { gpio-reserved-ranges = <0 4>, <81 4>; - ts_reset_default: ts-reset-default { + ts_reset_default: ts-reset-default-state { pins = "gpio99"; function = "gpio"; drive-strength = <16>; output-high; }; - ts_int_default: ts-int-default { + ts_int_default: ts-int-default-state { pins = "gpio125"; function = "gpio"; bias-pull-down; @@ -595,14 +589,14 @@ input-enable; }; - ts_reset_sleep: ts-reset-sleep { + ts_reset_sleep: ts-reset-sleep-state { pins = "gpio99"; function = "gpio"; bias-disable; drive-strength = <2>; }; - ts_int_sleep: ts-int-sleep { + ts_int_sleep: ts-int-sleep-state { pins = "gpio125"; function = "gpio"; bias-pull-down; @@ -610,27 +604,19 @@ input-enable; }; - sde_dsi_active: sde-dsi-active { + sde_dsi_active: sde-dsi-active-state { pins = "gpio6", "gpio10"; function = "gpio"; drive-strength = <8>; bias-disable; }; - sde_dsi_suspend: sde-dsi-suspend { + sde_dsi_suspend: sde-dsi-suspend-state { pins = "gpio6", "gpio10"; function = "gpio"; drive-strength = <2>; bias-pull-down; }; - - wcd_intr_default: wcd-intr-default { - pins = "gpio54"; - function = "gpio"; - input-enable; - bias-pull-down; - drive-strength = <2>; - }; }; &uart6 { @@ -707,10 +693,6 @@ }; &wcd9340 { - pinctrl-0 = <&wcd_intr_default>; - pinctrl-names = "default"; - clock-names = "extclk"; - clocks = <&rpmhcc RPMH_LN_BB_CLK2>; reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>; vdd-buck-sido-supply = <&vreg_s4a_1p8>; vdd-buck-supply = <&vreg_s4a_1p8>; diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index 65032b94b46d..479859bd8ab3 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -69,122 +69,18 @@ chosen { }; - memory@80000000 { - device_type = "memory"; - /* We expect the bootloader to fill in the size */ - reg = <0 0x80000000 0 0>; - }; - - reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - hyp_mem: hyp-mem@85700000 { - reg = <0 0x85700000 0 0x600000>; - no-map; - }; - - xbl_mem: xbl-mem@85e00000 { - reg = <0 0x85e00000 0 0x100000>; - no-map; - }; - - aop_mem: aop-mem@85fc0000 { - reg = <0 0x85fc0000 0 0x20000>; - no-map; - }; - - aop_cmd_db_mem: aop-cmd-db-mem@85fe0000 { - compatible = "qcom,cmd-db"; - reg = <0x0 0x85fe0000 0 0x20000>; - no-map; - }; - - smem@86000000 { - compatible = "qcom,smem"; - reg = <0x0 0x86000000 0 0x200000>; - no-map; - hwlocks = <&tcsr_mutex 3>; - }; - - tz_mem: tz@86200000 { - reg = <0 0x86200000 0 0x2d00000>; - no-map; - }; - - rmtfs_mem: rmtfs@88f00000 { - compatible = "qcom,rmtfs-mem"; - reg = <0 0x88f00000 0 0x200000>; - no-map; - - qcom,client-id = <1>; - qcom,vmid = <15>; - }; - - qseecom_mem: qseecom@8ab00000 { - reg = <0 0x8ab00000 0 0x1400000>; - no-map; - }; - - camera_mem: camera-mem@8bf00000 { - reg = <0 0x8bf00000 0 0x500000>; - no-map; - }; - - ipa_fw_mem: ipa-fw@8c400000 { - reg = <0 0x8c400000 0 0x10000>; - no-map; - }; - - ipa_gsi_mem: ipa-gsi@8c410000 { - reg = <0 0x8c410000 0 0x5000>; - no-map; - }; - - gpu_mem: gpu@8c415000 { - reg = <0 0x8c415000 0 0x2000>; - no-map; - }; - - adsp_mem: adsp@8c500000 { - reg = <0 0x8c500000 0 0x1a00000>; - no-map; - }; - - wlan_msa_mem: wlan-msa@8df00000 { - reg = <0 0x8df00000 0 0x100000>; - no-map; - }; - - mpss_region: mpss@8e000000 { - reg = <0 0x8e000000 0 0x7800000>; - no-map; - }; - - venus_mem: venus@95800000 { - reg = <0 0x95800000 0 0x500000>; - no-map; - }; - - cdsp_mem: cdsp@95d00000 { - reg = <0 0x95d00000 0 0x800000>; - no-map; - }; - - mba_region: mba@96500000 { - reg = <0 0x96500000 0 0x200000>; - no-map; - }; - - slpi_mem: slpi@96700000 { - reg = <0 0x96700000 0 0x1400000>; - no-map; + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <38400000>; + clock-output-names = "xo_board"; }; - spss_mem: spss@97b00000 { - reg = <0 0x97b00000 0 0x100000>; - no-map; + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32764>; }; }; @@ -209,9 +105,11 @@ next-level-cache = <&L2_0>; L2_0: l2-cache { compatible = "cache"; + cache-level = <2>; next-level-cache = <&L3_0>; L3_0: l3-cache { compatible = "cache"; + cache-level = <3>; }; }; }; @@ -233,6 +131,7 @@ next-level-cache = <&L2_100>; L2_100: l2-cache { compatible = "cache"; + cache-level = <2>; next-level-cache = <&L3_0>; }; }; @@ -254,6 +153,7 @@ next-level-cache = <&L2_200>; L2_200: l2-cache { compatible = "cache"; + cache-level = <2>; next-level-cache = <&L3_0>; }; }; @@ -275,6 +175,7 @@ next-level-cache = <&L2_300>; L2_300: l2-cache { compatible = "cache"; + cache-level = <2>; next-level-cache = <&L3_0>; }; }; @@ -296,6 +197,7 @@ next-level-cache = <&L2_400>; L2_400: l2-cache { compatible = "cache"; + cache-level = <2>; next-level-cache = <&L3_0>; }; }; @@ -317,6 +219,7 @@ next-level-cache = <&L2_500>; L2_500: l2-cache { compatible = "cache"; + cache-level = <2>; next-level-cache = <&L3_0>; }; }; @@ -338,6 +241,7 @@ next-level-cache = <&L2_600>; L2_600: l2-cache { compatible = "cache"; + cache-level = <2>; next-level-cache = <&L3_0>; }; }; @@ -359,6 +263,7 @@ next-level-cache = <&L2_700>; L2_700: l2-cache { compatible = "cache"; + cache-level = <2>; next-level-cache = <&L3_0>; }; }; @@ -436,6 +341,18 @@ }; }; + firmware { + scm { + compatible = "qcom,scm-sdm845", "qcom,scm"; + }; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0 0x80000000 0 0>; + }; + cpu0_opp_table: opp-table-cpu0 { compatible = "operating-points-v2"; opp-shared; @@ -696,37 +613,262 @@ }; }; + dsi_opp_table: opp-table-dsi { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-180000000 { + opp-hz = /bits/ 64 <180000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-275000000 { + opp-hz = /bits/ 64 <275000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-328580000 { + opp-hz = /bits/ 64 <328580000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + + qspi_opp_table: opp-table-qspi { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-150000000 { + opp-hz = /bits/ 64 <150000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + + qup_opp_table: opp-table-qup { + compatible = "operating-points-v2"; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-128000000 { + opp-hz = /bits/ 64 <128000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + pmu { compatible = "arm,armv8-pmuv3"; interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>; }; - timer { - compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>, - <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>, - <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>, - <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>; - }; + psci: psci { + compatible = "arm,psci-1.0"; + method = "smc"; - clocks { - xo_board: xo-board { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <38400000>; - clock-output-names = "xo_board"; + CPU_PD0: power-domain-cpu0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; }; - sleep_clk: sleep-clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32764>; + CPU_PD1: power-domain-cpu1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD2: power-domain-cpu2 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD3: power-domain-cpu3 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD4: power-domain-cpu4 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD5: power-domain-cpu5 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD6: power-domain-cpu6 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD7: power-domain-cpu7 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CLUSTER_PD: power-domain-cluster { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_SLEEP_0>; }; }; - firmware { - scm { - compatible = "qcom,scm-sdm845", "qcom,scm"; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hyp_mem: hyp-mem@85700000 { + reg = <0 0x85700000 0 0x600000>; + no-map; + }; + + xbl_mem: xbl-mem@85e00000 { + reg = <0 0x85e00000 0 0x100000>; + no-map; + }; + + aop_mem: aop-mem@85fc0000 { + reg = <0 0x85fc0000 0 0x20000>; + no-map; + }; + + aop_cmd_db_mem: aop-cmd-db-mem@85fe0000 { + compatible = "qcom,cmd-db"; + reg = <0x0 0x85fe0000 0 0x20000>; + no-map; + }; + + smem@86000000 { + compatible = "qcom,smem"; + reg = <0x0 0x86000000 0 0x200000>; + no-map; + hwlocks = <&tcsr_mutex 3>; + }; + + tz_mem: tz@86200000 { + reg = <0 0x86200000 0 0x2d00000>; + no-map; + }; + + rmtfs_mem: rmtfs@88f00000 { + compatible = "qcom,rmtfs-mem"; + reg = <0 0x88f00000 0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + + qseecom_mem: qseecom@8ab00000 { + reg = <0 0x8ab00000 0 0x1400000>; + no-map; + }; + + camera_mem: camera-mem@8bf00000 { + reg = <0 0x8bf00000 0 0x500000>; + no-map; + }; + + ipa_fw_mem: ipa-fw@8c400000 { + reg = <0 0x8c400000 0 0x10000>; + no-map; + }; + + ipa_gsi_mem: ipa-gsi@8c410000 { + reg = <0 0x8c410000 0 0x5000>; + no-map; + }; + + gpu_mem: gpu@8c415000 { + reg = <0 0x8c415000 0 0x2000>; + no-map; + }; + + adsp_mem: adsp@8c500000 { + reg = <0 0x8c500000 0 0x1a00000>; + no-map; + }; + + wlan_msa_mem: wlan-msa@8df00000 { + reg = <0 0x8df00000 0 0x100000>; + no-map; + }; + + mpss_region: mpss@8e000000 { + reg = <0 0x8e000000 0 0x7800000>; + no-map; + }; + + venus_mem: venus@95800000 { + reg = <0 0x95800000 0 0x500000>; + no-map; + }; + + cdsp_mem: cdsp@95d00000 { + reg = <0 0x95d00000 0 0x800000>; + no-map; + }; + + mba_region: mba@96500000 { + reg = <0 0x96500000 0 0x200000>; + no-map; + }; + + slpi_mem: slpi@96700000 { + reg = <0 0x96700000 0 0x1400000>; + no-map; + }; + + spss_mem: spss@97b00000 { + reg = <0 0x97b00000 0 0x100000>; + no-map; + }; + + mdata_mem: mpss-metadata { + alloc-ranges = <0 0xa0000000 0 0x20000000>; + size = <0 0x4000>; + no-map; }; }; @@ -1018,64 +1160,6 @@ }; }; - psci: psci { - compatible = "arm,psci-1.0"; - method = "smc"; - - CPU_PD0: power-domain-cpu0 { - #power-domain-cells = <0>; - power-domains = <&CLUSTER_PD>; - domain-idle-states = <&LITTLE_CPU_SLEEP_0>; - }; - - CPU_PD1: power-domain-cpu1 { - #power-domain-cells = <0>; - power-domains = <&CLUSTER_PD>; - domain-idle-states = <&LITTLE_CPU_SLEEP_0>; - }; - - CPU_PD2: power-domain-cpu2 { - #power-domain-cells = <0>; - power-domains = <&CLUSTER_PD>; - domain-idle-states = <&LITTLE_CPU_SLEEP_0>; - }; - - CPU_PD3: power-domain-cpu3 { - #power-domain-cells = <0>; - power-domains = <&CLUSTER_PD>; - domain-idle-states = <&LITTLE_CPU_SLEEP_0>; - }; - - CPU_PD4: power-domain-cpu4 { - #power-domain-cells = <0>; - power-domains = <&CLUSTER_PD>; - domain-idle-states = <&BIG_CPU_SLEEP_0>; - }; - - CPU_PD5: power-domain-cpu5 { - #power-domain-cells = <0>; - power-domains = <&CLUSTER_PD>; - domain-idle-states = <&BIG_CPU_SLEEP_0>; - }; - - CPU_PD6: power-domain-cpu6 { - #power-domain-cells = <0>; - power-domains = <&CLUSTER_PD>; - domain-idle-states = <&BIG_CPU_SLEEP_0>; - }; - - CPU_PD7: power-domain-cpu7 { - #power-domain-cells = <0>; - power-domains = <&CLUSTER_PD>; - domain-idle-states = <&BIG_CPU_SLEEP_0>; - }; - - CLUSTER_PD: power-domain-cluster { - #power-domain-cells = <0>; - domain-idle-states = <&CLUSTER_SLEEP_0>; - }; - }; - soc: soc@0 { #address-cells = <2>; #size-cells = <2>; @@ -1125,30 +1209,6 @@ clock-names = "core"; }; - qup_opp_table: opp-table-qup { - compatible = "operating-points-v2"; - - opp-50000000 { - opp-hz = /bits/ 64 <50000000>; - required-opps = <&rpmhpd_opp_min_svs>; - }; - - opp-75000000 { - opp-hz = /bits/ 64 <75000000>; - required-opps = <&rpmhpd_opp_low_svs>; - }; - - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - required-opps = <&rpmhpd_opp_svs>; - }; - - opp-128000000 { - opp-hz = /bits/ 64 <128000000>; - required-opps = <&rpmhpd_opp_nom>; - }; - }; - gpi_dma0: dma-controller@800000 { #dma-cells = <3>; compatible = "qcom,sdm845-gpi-dma"; @@ -1636,7 +1696,7 @@ }; }; - gpi_dma1: dma-controller@0xa00000 { + gpi_dma1: dma-controller@a00000 { #dma-cells = <3>; compatible = "qcom,sdm845-gpi-dma"; reg = <0 0x00a00000 0 0x60000>; @@ -2137,6 +2197,12 @@ interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>; }; + dma@10a2000 { + compatible = "qcom,sdm845-dcc", "qcom,dcc"; + reg = <0x0 0x010a2000 0x0 0x1000>, + <0x0 0x010ae000 0x0 0x2000>; + }; + pmu@114a000 { compatible = "qcom,sdm845-llcc-bwmon"; reg = <0 0x0114a000 0 0x1000>; @@ -2585,9 +2651,9 @@ iommus = <&apps_smmu 0x720 0x0>, <&apps_smmu 0x722 0x0>; - reg = <0 0x1e40000 0 0x7000>, - <0 0x1e47000 0 0x2000>, - <0 0x1e04000 0 0x2c000>; + reg = <0 0x01e40000 0 0x7000>, + <0 0x01e47000 0 0x2000>, + <0 0x01e04000 0 0x2c000>; reg-names = "ipa-reg", "ipa-shared", "gsi"; @@ -2641,7 +2707,7 @@ gpio-ranges = <&tlmm 0 0 151>; wakeup-parent = <&pdc_intc>; - cci0_default: cci0-default { + cci0_default: cci0-default-state { /* SDA, SCL */ pins = "gpio17", "gpio18"; function = "cci_i2c"; @@ -2650,7 +2716,7 @@ drive-strength = <2>; /* 2 mA */ }; - cci0_sleep: cci0-sleep { + cci0_sleep: cci0-sleep-state { /* SDA, SCL */ pins = "gpio17", "gpio18"; function = "cci_i2c"; @@ -2659,7 +2725,7 @@ bias-pull-down; }; - cci1_default: cci1-default { + cci1_default: cci1-default-state { /* SDA, SCL */ pins = "gpio19", "gpio20"; function = "cci_i2c"; @@ -2668,7 +2734,7 @@ drive-strength = <2>; /* 2 mA */ }; - cci1_sleep: cci1-sleep { + cci1_sleep: cci1-sleep-state { /* SDA, SCL */ pins = "gpio19", "gpio20"; function = "cci_i2c"; @@ -2677,556 +2743,495 @@ bias-pull-down; }; - qspi_clk: qspi-clk { - pinmux { - pins = "gpio95"; - function = "qspi_clk"; - }; + qspi_clk: qspi-clk-state { + pins = "gpio95"; + function = "qspi_clk"; }; - qspi_cs0: qspi-cs0 { - pinmux { - pins = "gpio90"; - function = "qspi_cs"; - }; + qspi_cs0: qspi-cs0-state { + pins = "gpio90"; + function = "qspi_cs"; }; - qspi_cs1: qspi-cs1 { - pinmux { - pins = "gpio89"; - function = "qspi_cs"; - }; + qspi_cs1: qspi-cs1-state { + pins = "gpio89"; + function = "qspi_cs"; }; - qspi_data01: qspi-data01 { - pinmux-data { - pins = "gpio91", "gpio92"; - function = "qspi_data"; - }; + qspi_data01: qspi-data01-state { + pins = "gpio91", "gpio92"; + function = "qspi_data"; }; - qspi_data12: qspi-data12 { - pinmux-data { - pins = "gpio93", "gpio94"; - function = "qspi_data"; - }; + qspi_data12: qspi-data12-state { + pins = "gpio93", "gpio94"; + function = "qspi_data"; }; - qup_i2c0_default: qup-i2c0-default { - pinmux { - pins = "gpio0", "gpio1"; - function = "qup0"; - }; + qup_i2c0_default: qup-i2c0-default-state { + pins = "gpio0", "gpio1"; + function = "qup0"; }; - qup_i2c1_default: qup-i2c1-default { - pinmux { - pins = "gpio17", "gpio18"; - function = "qup1"; - }; + qup_i2c1_default: qup-i2c1-default-state { + pins = "gpio17", "gpio18"; + function = "qup1"; }; - qup_i2c2_default: qup-i2c2-default { - pinmux { - pins = "gpio27", "gpio28"; - function = "qup2"; - }; + qup_i2c2_default: qup-i2c2-default-state { + pins = "gpio27", "gpio28"; + function = "qup2"; }; - qup_i2c3_default: qup-i2c3-default { - pinmux { - pins = "gpio41", "gpio42"; - function = "qup3"; - }; + qup_i2c3_default: qup-i2c3-default-state { + pins = "gpio41", "gpio42"; + function = "qup3"; }; - qup_i2c4_default: qup-i2c4-default { - pinmux { - pins = "gpio89", "gpio90"; - function = "qup4"; - }; + qup_i2c4_default: qup-i2c4-default-state { + pins = "gpio89", "gpio90"; + function = "qup4"; }; - qup_i2c5_default: qup-i2c5-default { - pinmux { - pins = "gpio85", "gpio86"; - function = "qup5"; - }; + qup_i2c5_default: qup-i2c5-default-state { + pins = "gpio85", "gpio86"; + function = "qup5"; }; - qup_i2c6_default: qup-i2c6-default { - pinmux { - pins = "gpio45", "gpio46"; - function = "qup6"; - }; + qup_i2c6_default: qup-i2c6-default-state { + pins = "gpio45", "gpio46"; + function = "qup6"; }; - qup_i2c7_default: qup-i2c7-default { - pinmux { - pins = "gpio93", "gpio94"; - function = "qup7"; - }; + qup_i2c7_default: qup-i2c7-default-state { + pins = "gpio93", "gpio94"; + function = "qup7"; }; - qup_i2c8_default: qup-i2c8-default { - pinmux { - pins = "gpio65", "gpio66"; - function = "qup8"; - }; + qup_i2c8_default: qup-i2c8-default-state { + pins = "gpio65", "gpio66"; + function = "qup8"; }; - qup_i2c9_default: qup-i2c9-default { - pinmux { - pins = "gpio6", "gpio7"; - function = "qup9"; - }; + qup_i2c9_default: qup-i2c9-default-state { + pins = "gpio6", "gpio7"; + function = "qup9"; }; - qup_i2c10_default: qup-i2c10-default { - pinmux { - pins = "gpio55", "gpio56"; - function = "qup10"; - }; + qup_i2c10_default: qup-i2c10-default-state { + pins = "gpio55", "gpio56"; + function = "qup10"; }; - qup_i2c11_default: qup-i2c11-default { - pinmux { - pins = "gpio31", "gpio32"; - function = "qup11"; - }; + qup_i2c11_default: qup-i2c11-default-state { + pins = "gpio31", "gpio32"; + function = "qup11"; }; - qup_i2c12_default: qup-i2c12-default { - pinmux { - pins = "gpio49", "gpio50"; - function = "qup12"; - }; + qup_i2c12_default: qup-i2c12-default-state { + pins = "gpio49", "gpio50"; + function = "qup12"; }; - qup_i2c13_default: qup-i2c13-default { - pinmux { - pins = "gpio105", "gpio106"; - function = "qup13"; - }; + qup_i2c13_default: qup-i2c13-default-state { + pins = "gpio105", "gpio106"; + function = "qup13"; }; - qup_i2c14_default: qup-i2c14-default { - pinmux { - pins = "gpio33", "gpio34"; - function = "qup14"; - }; + qup_i2c14_default: qup-i2c14-default-state { + pins = "gpio33", "gpio34"; + function = "qup14"; }; - qup_i2c15_default: qup-i2c15-default { - pinmux { - pins = "gpio81", "gpio82"; - function = "qup15"; - }; + qup_i2c15_default: qup-i2c15-default-state { + pins = "gpio81", "gpio82"; + function = "qup15"; }; - qup_spi0_default: qup-spi0-default { - pinmux { - pins = "gpio0", "gpio1", - "gpio2", "gpio3"; - function = "qup0"; - }; + qup_spi0_default: qup-spi0-default-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "qup0"; + }; - config { - pins = "gpio0", "gpio1", - "gpio2", "gpio3"; - drive-strength = <6>; - bias-disable; - }; + qup_spi1_default: qup-spi1-default-state { + pins = "gpio17", "gpio18", "gpio19", "gpio20"; + function = "qup1"; }; - qup_spi1_default: qup-spi1-default { - pinmux { - pins = "gpio17", "gpio18", - "gpio19", "gpio20"; - function = "qup1"; - }; + qup_spi2_default: qup-spi2-default-state { + pins = "gpio27", "gpio28", "gpio29", "gpio30"; + function = "qup2"; }; - qup_spi2_default: qup-spi2-default { - pinmux { - pins = "gpio27", "gpio28", - "gpio29", "gpio30"; - function = "qup2"; - }; + qup_spi3_default: qup-spi3-default-state { + pins = "gpio41", "gpio42", "gpio43", "gpio44"; + function = "qup3"; }; - qup_spi3_default: qup-spi3-default { - pinmux { - pins = "gpio41", "gpio42", - "gpio43", "gpio44"; - function = "qup3"; - }; + qup_spi4_default: qup-spi4-default-state { + pins = "gpio89", "gpio90", "gpio91", "gpio92"; + function = "qup4"; }; - qup_spi4_default: qup-spi4-default { - pinmux { - pins = "gpio89", "gpio90", - "gpio91", "gpio92"; - function = "qup4"; - }; + qup_spi5_default: qup-spi5-default-state { + pins = "gpio85", "gpio86", "gpio87", "gpio88"; + function = "qup5"; }; - qup_spi5_default: qup-spi5-default { - pinmux { - pins = "gpio85", "gpio86", - "gpio87", "gpio88"; - function = "qup5"; - }; + qup_spi6_default: qup-spi6-default-state { + pins = "gpio45", "gpio46", "gpio47", "gpio48"; + function = "qup6"; }; - qup_spi6_default: qup-spi6-default { - pinmux { - pins = "gpio45", "gpio46", - "gpio47", "gpio48"; - function = "qup6"; - }; + qup_spi7_default: qup-spi7-default-state { + pins = "gpio93", "gpio94", "gpio95", "gpio96"; + function = "qup7"; }; - qup_spi7_default: qup-spi7-default { - pinmux { - pins = "gpio93", "gpio94", - "gpio95", "gpio96"; - function = "qup7"; - }; + qup_spi8_default: qup-spi8-default-state { + pins = "gpio65", "gpio66", "gpio67", "gpio68"; + function = "qup8"; }; - qup_spi8_default: qup-spi8-default { - pinmux { - pins = "gpio65", "gpio66", - "gpio67", "gpio68"; - function = "qup8"; - }; + qup_spi9_default: qup-spi9-default-state { + pins = "gpio6", "gpio7", "gpio4", "gpio5"; + function = "qup9"; }; - qup_spi9_default: qup-spi9-default { - pinmux { - pins = "gpio6", "gpio7", - "gpio4", "gpio5"; - function = "qup9"; - }; + qup_spi10_default: qup-spi10-default-state { + pins = "gpio55", "gpio56", "gpio53", "gpio54"; + function = "qup10"; }; - qup_spi10_default: qup-spi10-default { - pinmux { - pins = "gpio55", "gpio56", - "gpio53", "gpio54"; - function = "qup10"; - }; + qup_spi11_default: qup-spi11-default-state { + pins = "gpio31", "gpio32", "gpio33", "gpio34"; + function = "qup11"; }; - qup_spi11_default: qup-spi11-default { - pinmux { - pins = "gpio31", "gpio32", - "gpio33", "gpio34"; - function = "qup11"; - }; + qup_spi12_default: qup-spi12-default-state { + pins = "gpio49", "gpio50", "gpio51", "gpio52"; + function = "qup12"; }; - qup_spi12_default: qup-spi12-default { - pinmux { - pins = "gpio49", "gpio50", - "gpio51", "gpio52"; - function = "qup12"; - }; + qup_spi13_default: qup-spi13-default-state { + pins = "gpio105", "gpio106", "gpio107", "gpio108"; + function = "qup13"; }; - qup_spi13_default: qup-spi13-default { - pinmux { - pins = "gpio105", "gpio106", - "gpio107", "gpio108"; - function = "qup13"; - }; + qup_spi14_default: qup-spi14-default-state { + pins = "gpio33", "gpio34", "gpio31", "gpio32"; + function = "qup14"; }; - qup_spi14_default: qup-spi14-default { - pinmux { - pins = "gpio33", "gpio34", - "gpio31", "gpio32"; - function = "qup14"; - }; + qup_spi15_default: qup-spi15-default-state { + pins = "gpio81", "gpio82", "gpio83", "gpio84"; + function = "qup15"; }; - qup_spi15_default: qup-spi15-default { - pinmux { - pins = "gpio81", "gpio82", - "gpio83", "gpio84"; - function = "qup15"; + qup_uart0_default: qup-uart0-default-state { + qup_uart0_tx: tx-pins { + pins = "gpio2"; + function = "qup0"; }; - }; - qup_uart0_default: qup-uart0-default { - pinmux { - pins = "gpio2", "gpio3"; + qup_uart0_rx: rx-pins { + pins = "gpio3"; function = "qup0"; }; }; - qup_uart1_default: qup-uart1-default { - pinmux { - pins = "gpio19", "gpio20"; + qup_uart1_default: qup-uart1-default-state { + qup_uart1_tx: tx-pins { + pins = "gpio19"; + function = "qup1"; + }; + + qup_uart1_rx: rx-pins { + pins = "gpio20"; function = "qup1"; }; }; - qup_uart2_default: qup-uart2-default { - pinmux { - pins = "gpio29", "gpio30"; + qup_uart2_default: qup-uart2-default-state { + qup_uart2_tx: tx-pins { + pins = "gpio29"; + function = "qup2"; + }; + + qup_uart2_rx: rx-pins { + pins = "gpio30"; function = "qup2"; }; }; - qup_uart3_default: qup-uart3-default { - pinmux { - pins = "gpio43", "gpio44"; + qup_uart3_default: qup-uart3-default-state { + qup_uart3_tx: tx-pins { + pins = "gpio43"; + function = "qup3"; + }; + + qup_uart3_rx: rx-pins { + pins = "gpio44"; function = "qup3"; }; }; - qup_uart4_default: qup-uart4-default { - pinmux { - pins = "gpio91", "gpio92"; + qup_uart3_4pin: qup-uart3-4pin-state { + qup_uart3_4pin_cts: cts-pins { + pins = "gpio41"; + function = "qup3"; + }; + + qup_uart3_4pin_rts_tx: rts-tx-pins { + pins = "gpio42", "gpio43"; + function = "qup3"; + }; + + qup_uart3_4pin_rx: rx-pins { + pins = "gpio44"; + function = "qup3"; + }; + }; + + qup_uart4_default: qup-uart4-default-state { + qup_uart4_tx: tx-pins { + pins = "gpio91"; + function = "qup4"; + }; + + qup_uart4_rx: rx-pins { + pins = "gpio92"; function = "qup4"; }; }; - qup_uart5_default: qup-uart5-default { - pinmux { - pins = "gpio87", "gpio88"; + qup_uart5_default: qup-uart5-default-state { + qup_uart5_tx: tx-pins { + pins = "gpio87"; + function = "qup5"; + }; + + qup_uart5_rx: rx-pins { + pins = "gpio88"; function = "qup5"; }; }; - qup_uart6_default: qup-uart6-default { - pinmux { - pins = "gpio47", "gpio48"; + qup_uart6_default: qup-uart6-default-state { + qup_uart6_tx: tx-pins { + pins = "gpio47"; + function = "qup6"; + }; + + qup_uart6_rx: rx-pins { + pins = "gpio48"; function = "qup6"; }; }; qup_uart6_4pin: qup-uart6-4pin-state { - - cts-pins { + qup_uart6_4pin_cts: cts-pins { pins = "gpio45"; function = "qup6"; bias-pull-down; }; - rts-tx-pins { + qup_uart6_4pin_rts_tx: rts-tx-pins { pins = "gpio46", "gpio47"; function = "qup6"; drive-strength = <2>; bias-disable; }; - rx-pins { + qup_uart6_4pin_rx: rx-pins { pins = "gpio48"; function = "qup6"; bias-pull-up; }; }; - qup_uart7_default: qup-uart7-default { - pinmux { - pins = "gpio95", "gpio96"; + qup_uart7_default: qup-uart7-default-state { + qup_uart7_tx: tx-pins { + pins = "gpio95"; function = "qup7"; }; - }; - - qup_uart8_default: qup-uart8-default { - pinmux { - pins = "gpio67", "gpio68"; - function = "qup8"; - }; - }; - qup_uart9_default: qup-uart9-default { - pinmux { - pins = "gpio4", "gpio5"; - function = "qup9"; + qup_uart7_rx: rx-pins { + pins = "gpio96"; + function = "qup7"; }; }; - qup_uart10_default: qup-uart10-default { - pinmux { - pins = "gpio53", "gpio54"; - function = "qup10"; + qup_uart8_default: qup-uart8-default-state { + qup_uart8_tx: tx-pins { + pins = "gpio67"; + function = "qup8"; }; - }; - qup_uart11_default: qup-uart11-default { - pinmux { - pins = "gpio33", "gpio34"; - function = "qup11"; + qup_uart8_rx: rx-pins { + pins = "gpio68"; + function = "qup8"; }; }; - qup_uart12_default: qup-uart12-default { - pinmux { - pins = "gpio51", "gpio52"; - function = "qup12"; + qup_uart9_default: qup-uart9-default-state { + qup_uart9_tx: tx-pins { + pins = "gpio4"; + function = "qup9"; }; - }; - qup_uart13_default: qup-uart13-default { - pinmux { - pins = "gpio107", "gpio108"; - function = "qup13"; + qup_uart9_rx: rx-pins { + pins = "gpio5"; + function = "qup9"; }; }; - qup_uart14_default: qup-uart14-default { - pinmux { - pins = "gpio31", "gpio32"; - function = "qup14"; + qup_uart10_default: qup-uart10-default-state { + qup_uart10_tx: tx-pins { + pins = "gpio53"; + function = "qup10"; }; - }; - qup_uart15_default: qup-uart15-default { - pinmux { - pins = "gpio83", "gpio84"; - function = "qup15"; + qup_uart10_rx: rx-pins { + pins = "gpio54"; + function = "qup10"; }; }; - quat_mi2s_sleep: quat_mi2s_sleep { - mux { - pins = "gpio58", "gpio59"; - function = "gpio"; + qup_uart11_default: qup-uart11-default-state { + qup_uart11_tx: tx-pins { + pins = "gpio33"; + function = "qup11"; }; - config { - pins = "gpio58", "gpio59"; - drive-strength = <2>; - bias-pull-down; - input-enable; + qup_uart11_rx: rx-pins { + pins = "gpio34"; + function = "qup11"; }; }; - quat_mi2s_active: quat_mi2s_active { - mux { - pins = "gpio58", "gpio59"; - function = "qua_mi2s"; + qup_uart12_default: qup-uart12-default-state { + qup_uart12_tx: tx-pins { + pins = "gpio51"; + function = "qup0"; }; - config { - pins = "gpio58", "gpio59"; - drive-strength = <8>; - bias-disable; - output-high; + qup_uart12_rx: rx-pins { + pins = "gpio52"; + function = "qup0"; }; }; - quat_mi2s_sd0_sleep: quat_mi2s_sd0_sleep { - mux { - pins = "gpio60"; - function = "gpio"; + qup_uart13_default: qup-uart13-default-state { + qup_uart13_tx: tx-pins { + pins = "gpio107"; + function = "qup13"; }; - config { - pins = "gpio60"; - drive-strength = <2>; - bias-pull-down; - input-enable; + qup_uart13_rx: rx-pins { + pins = "gpio108"; + function = "qup13"; }; }; - quat_mi2s_sd0_active: quat_mi2s_sd0_active { - mux { - pins = "gpio60"; - function = "qua_mi2s"; + qup_uart14_default: qup-uart14-default-state { + qup_uart14_tx: tx-pins { + pins = "gpio31"; + function = "qup14"; }; - config { - pins = "gpio60"; - drive-strength = <8>; - bias-disable; + qup_uart14_rx: rx-pins { + pins = "gpio32"; + function = "qup14"; }; }; - quat_mi2s_sd1_sleep: quat_mi2s_sd1_sleep { - mux { - pins = "gpio61"; - function = "gpio"; + qup_uart15_default: qup-uart15-default-state { + qup_uart15_tx: tx-pins { + pins = "gpio83"; + function = "qup15"; }; - config { - pins = "gpio61"; - drive-strength = <2>; - bias-pull-down; - input-enable; + qup_uart15_rx: rx-pins { + pins = "gpio84"; + function = "qup15"; }; }; - quat_mi2s_sd1_active: quat_mi2s_sd1_active { - mux { - pins = "gpio61"; - function = "qua_mi2s"; - }; + quat_mi2s_sleep: quat-mi2s-sleep-state { + pins = "gpio58", "gpio59"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + input-enable; + }; - config { - pins = "gpio61"; - drive-strength = <8>; - bias-disable; - }; + quat_mi2s_active: quat-mi2s-active-state { + pins = "gpio58", "gpio59"; + function = "qua_mi2s"; + drive-strength = <8>; + bias-disable; + output-high; }; - quat_mi2s_sd2_sleep: quat_mi2s_sd2_sleep { - mux { - pins = "gpio62"; - function = "gpio"; - }; + quat_mi2s_sd0_sleep: quat-mi2s-sd0-sleep-state { + pins = "gpio60"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + input-enable; + }; - config { - pins = "gpio62"; - drive-strength = <2>; - bias-pull-down; - input-enable; - }; + quat_mi2s_sd0_active: quat-mi2s-sd0-active-state { + pins = "gpio60"; + function = "qua_mi2s"; + drive-strength = <8>; + bias-disable; }; - quat_mi2s_sd2_active: quat_mi2s_sd2_active { - mux { - pins = "gpio62"; - function = "qua_mi2s"; - }; + quat_mi2s_sd1_sleep: quat-mi2s-sd1-sleep-state { + pins = "gpio61"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + input-enable; + }; - config { - pins = "gpio62"; - drive-strength = <8>; - bias-disable; - }; + quat_mi2s_sd1_active: quat-mi2s-sd1-active-state { + pins = "gpio61"; + function = "qua_mi2s"; + drive-strength = <8>; + bias-disable; }; - quat_mi2s_sd3_sleep: quat_mi2s_sd3_sleep { - mux { - pins = "gpio63"; - function = "gpio"; - }; + quat_mi2s_sd2_sleep: quat-mi2s-sd2-sleep-state { + pins = "gpio62"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + input-enable; + }; - config { - pins = "gpio63"; - drive-strength = <2>; - bias-pull-down; - input-enable; - }; + quat_mi2s_sd2_active: quat-mi2s-sd2-active-state { + pins = "gpio62"; + function = "qua_mi2s"; + drive-strength = <8>; + bias-disable; }; - quat_mi2s_sd3_active: quat_mi2s_sd3_active { - mux { - pins = "gpio63"; - function = "qua_mi2s"; - }; + quat_mi2s_sd3_sleep: quat-mi2s-sd3-sleep-state { + pins = "gpio63"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + input-enable; + }; - config { - pins = "gpio63"; - drive-strength = <8>; - bias-disable; - }; + quat_mi2s_sd3_active: quat-mi2s-sd3-active-state { + pins = "gpio63"; + function = "qua_mi2s"; + drive-strength = <8>; + bias-disable; }; }; @@ -3283,6 +3288,10 @@ memory-region = <&mpss_region>; }; + metadata { + memory-region = <&mdata_mem>; + }; + glink-edge { interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>; label = "modem"; @@ -3807,30 +3816,6 @@ }; }; - qspi_opp_table: opp-table-qspi { - compatible = "operating-points-v2"; - - opp-19200000 { - opp-hz = /bits/ 64 <19200000>; - required-opps = <&rpmhpd_opp_min_svs>; - }; - - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - required-opps = <&rpmhpd_opp_low_svs>; - }; - - opp-150000000 { - opp-hz = /bits/ 64 <150000000>; - required-opps = <&rpmhpd_opp_svs>; - }; - - opp-300000000 { - opp-hz = /bits/ 64 <300000000>; - required-opps = <&rpmhpd_opp_nom>; - }; - }; - qspi: spi@88df000 { compatible = "qcom,sdm845-qspi", "qcom,qspi-v1"; reg = <0 0x088df000 0 0x600>; @@ -3856,67 +3841,7 @@ iommus = <&apps_smmu 0x1806 0x0>; #address-cells = <1>; #size-cells = <0>; - - slim@1 { - reg = <1>; - #address-cells = <2>; - #size-cells = <0>; - - wcd9340_ifd: ifd@0,0 { - compatible = "slim217,250"; - reg = <0 0>; - }; - - wcd9340: codec@1,0 { - compatible = "slim217,250"; - reg = <1 0>; - slim-ifc-dev = <&wcd9340_ifd>; - - #sound-dai-cells = <1>; - - interrupts-extended = <&tlmm 54 IRQ_TYPE_LEVEL_HIGH>; - interrupt-controller; - #interrupt-cells = <1>; - - #clock-cells = <0>; - clock-frequency = <9600000>; - clock-output-names = "mclk"; - qcom,micbias1-microvolt = <1800000>; - qcom,micbias2-microvolt = <1800000>; - qcom,micbias3-microvolt = <1800000>; - qcom,micbias4-microvolt = <1800000>; - - #address-cells = <1>; - #size-cells = <1>; - - wcdgpio: gpio-controller@42 { - compatible = "qcom,wcd9340-gpio"; - gpio-controller; - #gpio-cells = <2>; - reg = <0x42 0x2>; - }; - - swm: swm@c85 { - compatible = "qcom,soundwire-v1.3.0"; - reg = <0xc85 0x40>; - interrupts-extended = <&wcd9340 20>; - - qcom,dout-ports = <6>; - qcom,din-ports = <2>; - qcom,ports-sinterval-low =/bits/ 8 <0x07 0x1F 0x3F 0x7 0x1F 0x3F 0x0F 0x0F>; - qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0C 0x6 0x12 0x0D 0x07 0x0A >; - qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x1F 0x00 0x00 0x1F 0x00 0x00>; - - #sound-dai-cells = <1>; - clocks = <&wcd9340>; - clock-names = "iface"; - #address-cells = <2>; - #size-cells = <0>; - - - }; - }; - }; + status = "disabled"; }; lmh_cluster1: lmh@17d70800 { @@ -3943,9 +3868,6 @@ #interrupt-cells = <1>; }; - sound: sound { - }; - usb_1_hsphy: phy@88e2000 { compatible = "qcom,sdm845-qusb2-phy", "qcom,qusb2-v2-phy"; reg = <0 0x088e2000 0 0x400>; @@ -4239,16 +4161,16 @@ camss: camss@a00000 { compatible = "qcom,sdm845-camss"; - reg = <0 0xacb3000 0 0x1000>, - <0 0xacba000 0 0x1000>, - <0 0xacc8000 0 0x1000>, - <0 0xac65000 0 0x1000>, - <0 0xac66000 0 0x1000>, - <0 0xac67000 0 0x1000>, - <0 0xac68000 0 0x1000>, - <0 0xacaf000 0 0x4000>, - <0 0xacb6000 0 0x4000>, - <0 0xacc4000 0 0x4000>; + reg = <0 0x0acb3000 0 0x1000>, + <0 0x0acba000 0 0x1000>, + <0 0x0acc8000 0 0x1000>, + <0 0x0ac65000 0 0x1000>, + <0 0x0ac66000 0 0x1000>, + <0 0x0ac67000 0 0x1000>, + <0 0x0ac68000 0 0x1000>, + <0 0x0acaf000 0 0x4000>, + <0 0x0acb6000 0 0x4000>, + <0 0x0acc4000 0 0x4000>; reg-names = "csid0", "csid1", "csid2", @@ -4388,7 +4310,7 @@ }; cci: cci@ac4a000 { - compatible = "qcom,sdm845-cci"; + compatible = "qcom,sdm845-cci", "qcom,msm8996-cci"; #address-cells = <1>; #size-cells = <0>; @@ -4444,36 +4366,7 @@ clock-names = "bi_tcxo"; }; - dsi_opp_table: opp-table-dsi { - compatible = "operating-points-v2"; - - opp-19200000 { - opp-hz = /bits/ 64 <19200000>; - required-opps = <&rpmhpd_opp_min_svs>; - }; - - opp-180000000 { - opp-hz = /bits/ 64 <180000000>; - required-opps = <&rpmhpd_opp_low_svs>; - }; - - opp-275000000 { - opp-hz = /bits/ 64 <275000000>; - required-opps = <&rpmhpd_opp_svs>; - }; - - opp-328580000 { - opp-hz = /bits/ 64 <328580000>; - required-opps = <&rpmhpd_opp_svs_l1>; - }; - - opp-358000000 { - opp-hz = /bits/ 64 <358000000>; - required-opps = <&rpmhpd_opp_nom>; - }; - }; - - mdss: mdss@ae00000 { + mdss: display-subsystem@ae00000 { compatible = "qcom,sdm845-mdss"; reg = <0 0x0ae00000 0 0x1000>; reg-names = "mdss"; @@ -4577,11 +4470,11 @@ status = "disabled"; compatible = "qcom,sdm845-dp"; - reg = <0 0xae90000 0 0x200>, - <0 0xae90200 0 0x200>, - <0 0xae90400 0 0x600>, - <0 0xae90a00 0 0x600>, - <0 0xae91000 0 0x600>; + reg = <0 0x0ae90000 0 0x200>, + <0 0x0ae90200 0 0x200>, + <0 0x0ae90400 0 0x600>, + <0 0x0ae90a00 0 0x600>, + <0 0x0ae91000 0 0x600>; interrupt-parent = <&mdss>; interrupts = <12>; @@ -4593,7 +4486,6 @@ <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>; clock-names = "core_iface", "core_aux", "ctrl_link", "ctrl_link_iface", "stream_pixel"; - #clock-cells = <1>; assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>, <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>; assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>; @@ -4619,7 +4511,7 @@ }; }; - dp_opp_table: dp-opp-table { + dp_opp_table: opp-table { compatible = "operating-points-v2"; opp-162000000 { @@ -4645,7 +4537,8 @@ }; dsi0: dsi@ae94000 { - compatible = "qcom,mdss-dsi-ctrl"; + compatible = "qcom,sdm845-dsi-ctrl", + "qcom,mdss-dsi-ctrl"; reg = <0 0x0ae94000 0 0x400>; reg-names = "dsi_ctrl"; @@ -4716,7 +4609,8 @@ }; dsi1: dsi@ae96000 { - compatible = "qcom,mdss-dsi-ctrl"; + compatible = "qcom,sdm845-dsi-ctrl", + "qcom,mdss-dsi-ctrl"; reg = <0 0x0ae96000 0 0x400>; reg-names = "dsi_ctrl"; @@ -4790,7 +4684,7 @@ gpu: gpu@5000000 { compatible = "qcom,adreno-630.2", "qcom,adreno"; - reg = <0 0x5000000 0 0x40000>, <0 0x509e000 0 0x10>; + reg = <0 0x05000000 0 0x40000>, <0 0x509e000 0 0x10>; reg-names = "kgsl_3d0_reg_memory", "cx_mem"; /* @@ -4860,7 +4754,7 @@ adreno_smmu: iommu@5040000 { compatible = "qcom,sdm845-smmu-v2", "qcom,adreno-smmu", "qcom,smmu-v2"; - reg = <0 0x5040000 0 0x10000>; + reg = <0 0x05040000 0 0x10000>; #iommu-cells = <1>; #global-interrupts = <2>; interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>, @@ -4883,9 +4777,9 @@ gmu: gmu@506a000 { compatible = "qcom,adreno-gmu-630.2", "qcom,adreno-gmu"; - reg = <0 0x506a000 0 0x30000>, - <0 0xb280000 0 0x10000>, - <0 0xb480000 0 0x10000>; + reg = <0 0x0506a000 0 0x30000>, + <0 0x0b280000 0 0x10000>, + <0 0x0b480000 0 0x10000>; reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq"; interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, @@ -4992,7 +4886,7 @@ #reset-cells = <1>; }; - aoss_qmp: power-controller@c300000 { + aoss_qmp: power-management@c300000 { compatible = "qcom,sdm845-aoss-qmp", "qcom,aoss-qmp"; reg = <0 0x0c300000 0 0x400>; interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>; @@ -5365,6 +5259,9 @@ }; }; + sound: sound { + }; + thermal-zones { cpu0-thermal { polling-delay-passive = <250>; @@ -5385,7 +5282,7 @@ type = "passive"; }; - cpu0_crit: cpu_crit { + cpu0_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -5412,7 +5309,7 @@ type = "passive"; }; - cpu1_crit: cpu_crit { + cpu1_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -5439,7 +5336,7 @@ type = "passive"; }; - cpu2_crit: cpu_crit { + cpu2_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -5466,7 +5363,7 @@ type = "passive"; }; - cpu3_crit: cpu_crit { + cpu3_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -5493,7 +5390,7 @@ type = "passive"; }; - cpu4_crit: cpu_crit { + cpu4_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -5520,7 +5417,7 @@ type = "passive"; }; - cpu5_crit: cpu_crit { + cpu5_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -5547,7 +5444,7 @@ type = "passive"; }; - cpu6_crit: cpu_crit { + cpu6_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -5574,7 +5471,7 @@ type = "passive"; }; - cpu7_crit: cpu_crit { + cpu7_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -5787,4 +5684,12 @@ }; }; }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>; + }; }; diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts index f32b7445f7c9..67d2a663ce75 100644 --- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts +++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts @@ -13,6 +13,7 @@ #include <dt-bindings/sound/qcom,q6afe.h> #include <dt-bindings/sound/qcom,q6asm.h> #include "sdm850.dtsi" +#include "sdm845-wcd9340.dtsi" #include "pm8998.dtsi" /* @@ -94,12 +95,12 @@ }; &adsp_pas { - firmware-name = "qcom/LENOVO/81JL/qcadsp850.mbn"; + firmware-name = "qcom/sdm850/LENOVO/81JL/qcadsp850.mbn"; status = "okay"; }; &apps_rsc { - pm8998-rpmh-regulators { + regulators-0 { compatible = "qcom,pm8998-rpmh-regulators"; qcom,pmic-id = "a"; @@ -306,7 +307,7 @@ }; &cdsp_pas { - firmware-name = "qcom/LENOVO/81JL/qccdsp850.mbn"; + firmware-name = "qcom/sdm850/LENOVO/81JL/qccdsp850.mbn"; status = "okay"; }; @@ -345,7 +346,7 @@ status = "okay"; zap-shader { memory-region = <&gpu_mem>; - firmware-name = "qcom/LENOVO/81JL/qcdxkmsuc850.mbn"; + firmware-name = "qcom/sdm850/LENOVO/81JL/qcdxkmsuc850.mbn"; }; }; @@ -465,8 +466,9 @@ }; &ipa { - status = "okay"; + qcom,gsi-loader = "self"; memory-region = <&ipa_fw_mem>; + status = "okay"; }; &mdss { @@ -475,45 +477,17 @@ &mss_pil { status = "okay"; - firmware-name = "qcom/LENOVO/81JL/qcdsp1v2850.mbn", "qcom/LENOVO/81JL/qcdsp2850.mbn"; + firmware-name = "qcom/sdm850/LENOVO/81JL/qcdsp1v2850.mbn", "qcom/sdm850/LENOVO/81JL/qcdsp2850.mbn"; }; &qup_i2c10_default { - pinconf { - pins = "gpio55", "gpio56"; - drive-strength = <2>; - bias-disable; - }; + drive-strength = <2>; + bias-disable; }; &qup_i2c12_default { - pinmux { - drive-strength = <2>; - bias-disable; - }; -}; - -&qup_uart6_default { - pinmux { - pins = "gpio45", "gpio46", "gpio47", "gpio48"; - function = "qup6"; - }; - - cts { - pins = "gpio45"; - bias-pull-down; - }; - - rts-tx { - pins = "gpio46", "gpio47"; - drive-strength = <2>; - bias-disable; - }; - - rx { - pins = "gpio48"; - bias-pull-up; - }; + drive-strength = <2>; + bias-disable; }; &qupv3_id_0 { @@ -539,7 +513,7 @@ }; &sound { - compatible = "qcom,db845c-sndcard"; + compatible = "lenovo,yoga-c630-sndcard", "qcom,sdm845-sndcard"; model = "Lenovo-YOGA-C630-13Q50"; audio-routing = @@ -621,13 +595,14 @@ &tlmm { gpio-reserved-ranges = <0 4>, <81 4>; - sn65dsi86_pin_active: sn65dsi86-enable { + sn65dsi86_pin_active: sn65dsi86-enable-state { pins = "gpio96"; + function = "gpio"; drive-strength = <2>; bias-disable; }; - i2c3_hid_active: i2c2-hid-active { + i2c3_hid_active: i2c2-hid-active-state { pins = "gpio37"; function = "gpio"; @@ -636,7 +611,7 @@ drive-strength = <2>; }; - i2c5_hid_active: i2c5-hid-active { + i2c5_hid_active: i2c5-hid-active-state { pins = "gpio125"; function = "gpio"; @@ -645,7 +620,7 @@ drive-strength = <2>; }; - i2c11_hid_active: i2c11-hid-active { + i2c11_hid_active: i2c11-hid-active-state { pins = "gpio92"; function = "gpio"; @@ -654,16 +629,7 @@ drive-strength = <2>; }; - wcd_intr_default: wcd_intr_default { - pins = "gpio54"; - function = "gpio"; - - input-enable; - bias-pull-down; - drive-strength = <2>; - }; - - lid_pin_active: lid-pin { + lid_pin_active: lid-pin-state { pins = "gpio124"; function = "gpio"; @@ -671,7 +637,7 @@ bias-disable; }; - mode_pin_active: mode-pin { + mode_pin_active: mode-pin-state { pins = "gpio95"; function = "gpio"; @@ -681,6 +647,8 @@ }; &uart6 { + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart6_4pin>; status = "okay"; bluetooth { @@ -766,14 +734,11 @@ }; &venus { + firmware-name = "qcom/sdm850/LENOVO/81JL/qcvss850.mbn"; status = "okay"; }; -&wcd9340{ - pinctrl-0 = <&wcd_intr_default>; - pinctrl-names = "default"; - clock-names = "extclk"; - clocks = <&rpmhcc RPMH_LN_BB_CLK2>; +&wcd9340 { reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>; vdd-buck-supply = <&vreg_s4a_1p8>; vdd-buck-sido-supply = <&vreg_s4a_1p8>; diff --git a/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts b/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts index daca1e0ad62a..9850140514ba 100644 --- a/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts +++ b/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts @@ -14,6 +14,7 @@ #include <dt-bindings/sound/qcom,q6afe.h> #include <dt-bindings/sound/qcom,q6asm.h> #include "sdm850.dtsi" +#include "sdm845-wcd9340.dtsi" #include "pm8998.dtsi" /* @@ -129,7 +130,7 @@ }; &apps_rsc { - pm8998-rpmh-regulators { + regulators-0 { compatible = "qcom,pm8998-rpmh-regulators"; qcom,pmic-id = "a"; @@ -383,9 +384,10 @@ }; &ipa { - status = "okay"; + qcom,gsi-loader = "self"; memory-region = <&ipa_fw_mem>; firmware-name = "qcom/sdm850/samsung/w737/ipa_fws.elf"; + status = "okay"; }; /* No idea why it causes an SError when enabled */ @@ -399,49 +401,18 @@ }; &qup_i2c10_default { - pinconf { - pins = "gpio55", "gpio56"; - drive-strength = <2>; - bias-disable; - }; + drive-strength = <2>; + bias-disable; }; &qup_i2c11_default { - pinconf { - pins = "gpio31", "gpio32"; - drive-strength = <2>; - bias-disable; - }; + drive-strength = <2>; + bias-disable; }; &qup_i2c12_default { - pinmux { - drive-strength = <2>; - bias-disable; - }; -}; - -&qup_uart6_default { - pinmux { - pins = "gpio45", "gpio46", "gpio47", "gpio48"; - function = "qup6"; - }; - - cts { - pins = "gpio45"; - bias-pull-down; - }; - - rts-tx { - pins = "gpio46", "gpio47"; - drive-strength = <2>; - bias-disable; - }; - - rx { - pins = "gpio48"; - bias-pull-up; - }; + drive-strength = <2>; + bias-disable; }; &qupv3_id_0 { @@ -549,69 +520,44 @@ &tlmm { gpio-reserved-ranges = <0 6>, <85 4>; - pen_irq_l: pen-irq-l { - pinmux { - pins = "gpio119"; - function = "gpio"; - }; - - pinconf { - pins = "gpio119"; - bias-disable; - }; - }; - - pen_pdct_l: pen-pdct-l { - pinmux { - pins = "gpio124"; - function = "gpio"; - }; - - pinconf { - pins = "gpio124"; - bias-disable; - drive-strength = <2>; - output-high; - }; + pen_irq_l: pen-irq-l-state { + pins = "gpio119"; + function = "gpio"; + bias-disable; }; - pen_rst_l: pen-rst-l { - pinmux { - pins = "gpio21"; - function = "gpio"; - }; - - pinconf { - pins = "gpio21"; - bias-disable; - drive-strength = <2>; - - /* - * The pen driver doesn't currently support - * driving this reset line. By specifying - * output-high here we're relying on the fact - * that this pin has a default pulldown at boot - * (which makes sure the pen was in reset if it - * was powered) and then we set it high here to - * take it out of reset. Better would be if the - * pen driver could control this and we could - * remove "output-high" here. - */ - output-high; - }; + pen_pdct_l: pen-pdct-l-state { + pins = "gpio124"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + output-high; }; - wcd_intr_default: wcd_intr_default { - pins = "gpio54"; + pen_rst_l: pen-rst-l-state { + pins = "gpio21"; function = "gpio"; - - input-enable; - bias-pull-down; + bias-disable; drive-strength = <2>; + + /* + * The pen driver doesn't currently support + * driving this reset line. By specifying + * output-high here we're relying on the fact + * that this pin has a default pulldown at boot + * (which makes sure the pen was in reset if it + * was powered) and then we set it high here to + * take it out of reset. Better would be if the + * pen driver could control this and we could + * remove "output-high" here. + */ + output-high; }; }; &uart6 { + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart6_4pin>; status = "okay"; bluetooth { @@ -701,11 +647,7 @@ firmware-name = "qcom/sdm850/samsung/w737/qcvss850.mbn"; }; -&wcd9340{ - pinctrl-0 = <&wcd_intr_default>; - pinctrl-names = "default"; - clock-names = "extclk"; - clocks = <&rpmhcc RPMH_LN_BB_CLK2>; +&wcd9340 { reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>; vdd-buck-supply = <&vreg_s4a_1p8>; vdd-buck-sido-supply = <&vreg_s4a_1p8>; diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi index 572bf04adf90..4d6ec815b78b 100644 --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi @@ -296,6 +296,8 @@ rpmcc: clock-controller { compatible = "qcom,rpmcc-sm6115", "qcom,rpmcc"; + clocks = <&xo_board>; + clock-names = "xo"; #clock-cells = <1>; }; @@ -343,25 +345,100 @@ }; }; + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + + interrupts = <GIC_SPI 279 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apcs_glb 10>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + adsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + adsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-cdsp { + compatible = "qcom,smp2p"; + qcom,smem = <94>, <432>; + + interrupts = <GIC_SPI 263 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apcs_glb 30>; + + qcom,local-pid = <0>; + qcom,remote-pid = <5>; + + cdsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + cdsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-mpss { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + + interrupts = <GIC_SPI 70 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apcs_glb 14>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + modem_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + modem_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + soc: soc@0 { compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0 0 0xffffffff>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0 0x10 0>; + dma-ranges = <0 0 0 0 0x10 0>; tcsr_mutex: hwlock@340000 { compatible = "qcom,tcsr-mutex"; - reg = <0x00340000 0x20000>; + reg = <0x0 0x00340000 0x0 0x20000>; #hwlock-cells = <1>; }; tlmm: pinctrl@500000 { compatible = "qcom,sm6115-tlmm"; - reg = <0x00500000 0x400000>, <0x00900000 0x400000>, <0x00d00000 0x400000>; + reg = <0x0 0x00500000 0x0 0x400000>, + <0x0 0x00900000 0x0 0x400000>, + <0x0 0x00d00000 0x0 0x400000>; reg-names = "west", "south", "east"; interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; - gpio-ranges = <&tlmm 0 0 121>; + gpio-ranges = <&tlmm 0 0 114>; /* GPIOs + ufs_reset */ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; @@ -557,7 +634,7 @@ gcc: clock-controller@1400000 { compatible = "qcom,gcc-sm6115"; - reg = <0x01400000 0x1f0000>; + reg = <0x0 0x01400000 0x0 0x1f0000>; clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>; clock-names = "bi_tcxo", "sleep_clk"; #clock-cells = <1>; @@ -567,7 +644,7 @@ usb_1_hsphy: phy@1613000 { compatible = "qcom,sm6115-qusb2-phy"; - reg = <0x01613000 0x180>; + reg = <0x0 0x01613000 0x0 0x180>; #phy-cells = <0>; clocks = <&gcc GCC_AHB2PHY_USB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>; @@ -581,7 +658,7 @@ qfprom@1b40000 { compatible = "qcom,sm6115-qfprom", "qcom,qfprom"; - reg = <0x01b40000 0x7000>; + reg = <0x0 0x01b40000 0x0 0x7000>; #address-cells = <1>; #size-cells = <1>; @@ -593,18 +670,18 @@ rng: rng@1b53000 { compatible = "qcom,prng-ee"; - reg = <0x01b53000 0x1000>; + reg = <0x0 0x01b53000 0x0 0x1000>; clocks = <&gcc GCC_PRNG_AHB_CLK>; clock-names = "core"; }; spmi_bus: spmi@1c40000 { compatible = "qcom,spmi-pmic-arb"; - reg = <0x01c40000 0x1100>, - <0x01e00000 0x2000000>, - <0x03e00000 0x100000>, - <0x03f00000 0xa0000>, - <0x01c0a000 0x26000>; + reg = <0x0 0x01c40000 0x0 0x1100>, + <0x0 0x01e00000 0x0 0x2000000>, + <0x0 0x03e00000 0x0 0x100000>, + <0x0 0x03f00000 0x0 0xa0000>, + <0x0 0x01c0a000 0x0 0x26000>; reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; interrupt-names = "periph_irq"; interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; @@ -618,8 +695,8 @@ tsens0: thermal-sensor@4410000 { compatible = "qcom,sm6115-tsens", "qcom,tsens-v2"; - reg = <0x04411000 0x1ff>, /* TM */ - <0x04410000 0x8>; /* SROT */ + reg = <0x0 0x04411000 0x0 0x1ff>, /* TM */ + <0x0 0x04410000 0x0 0x8>; /* SROT */ #qcom,sensors = <16>; interrupts = <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; @@ -629,17 +706,19 @@ rpm_msg_ram: sram@45f0000 { compatible = "qcom,rpm-msg-ram"; - reg = <0x045f0000 0x7000>; + reg = <0x0 0x045f0000 0x0 0x7000>; }; sram@4690000 { compatible = "qcom,rpm-stats"; - reg = <0x04690000 0x10000>; + reg = <0x0 0x04690000 0x0 0x10000>; }; sdhc_1: mmc@4744000 { compatible = "qcom,sm6115-sdhci", "qcom,sdhci-msm-v5"; - reg = <0x04744000 0x1000>, <0x04745000 0x1000>, <0x04748000 0x8000>; + reg = <0x0 0x04744000 0x0 0x1000>, + <0x0 0x04745000 0x0 0x1000>, + <0x0 0x04748000 0x0 0x8000>; reg-names = "hc", "cqhci", "ice"; interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>, @@ -648,7 +727,7 @@ clocks = <&gcc GCC_SDCC1_AHB_CLK>, <&gcc GCC_SDCC1_APPS_CLK>, - <&xo_board>, + <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GCC_SDCC1_ICE_CORE_CLK>; clock-names = "iface", "core", "xo", "ice"; @@ -662,14 +741,16 @@ sdhc_2: mmc@4784000 { compatible = "qcom,sm6115-sdhci", "qcom,sdhci-msm-v5"; - reg = <0x04784000 0x1000>; + reg = <0x0 0x04784000 0x0 0x1000>; reg-names = "hc"; interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hc_irq", "pwr_irq"; - clocks = <&gcc GCC_SDCC2_AHB_CLK>, <&gcc GCC_SDCC2_APPS_CLK>, <&xo_board>; + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; clock-names = "iface", "core", "xo"; pinctrl-0 = <&sdc2_state_on>; @@ -703,7 +784,8 @@ ufs_mem_hc: ufs@4804000 { compatible = "qcom,sm6115-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; - reg = <0x04804000 0x3000>, <0x04810000 0x8000>; + reg = <0x0 0x04804000 0x0 0x3000>, <0x0 0x04810000 0x0 0x8000>; + reg-names = "std", "ice"; interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; phys = <&ufs_mem_phy_lanes>; phy-names = "ufsphy"; @@ -736,19 +818,19 @@ <0 0>, <0 0>, <37500000 150000000>, - <75000000 300000000>, <0 0>, <0 0>, - <0 0>; + <0 0>, + <75000000 300000000>; status = "disabled"; }; ufs_mem_phy: phy@4807000 { compatible = "qcom,sm6115-qmp-ufs-phy"; - reg = <0x04807000 0x1c4>; - #address-cells = <1>; - #size-cells = <1>; + reg = <0x0 0x04807000 0x0 0x1c4>; + #address-cells = <2>; + #size-cells = <2>; ranges; clocks = <&gcc GCC_UFS_CLKREF_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; @@ -759,16 +841,16 @@ status = "disabled"; ufs_mem_phy_lanes: phy@4807400 { - reg = <0x4807400 0x098>, - <0x4807600 0x130>, - <0x4807c00 0x16c>; + reg = <0x0 0x04807400 0x0 0x098>, + <0x0 0x04807600 0x0 0x130>, + <0x0 0x04807c00 0x0 0x16c>; #phy-cells = <0>; }; }; gpi_dma0: dma-controller@4a00000 { compatible = "qcom,sm6115-gpi-dma", "qcom,sm6350-gpi-dma"; - reg = <0x04a00000 0x60000>; + reg = <0x0 0x04a00000 0x0 0x60000>; interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, @@ -788,19 +870,19 @@ qupv3_id_0: geniqup@4ac0000 { compatible = "qcom,geni-se-qup"; - reg = <0x04ac0000 0x2000>; + reg = <0x0 0x04ac0000 0x0 0x2000>; clock-names = "m-ahb", "s-ahb"; clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; iommus = <&apps_smmu 0xe3 0x0>; ranges; status = "disabled"; i2c0: i2c@4a80000 { compatible = "qcom,geni-i2c"; - reg = <0x04a80000 0x4000>; + reg = <0x0 0x04a80000 0x0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; pinctrl-names = "default"; @@ -816,7 +898,7 @@ spi0: spi@4a80000 { compatible = "qcom,geni-spi"; - reg = <0x04a80000 0x4000>; + reg = <0x0 0x04a80000 0x0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; pinctrl-names = "default"; @@ -832,7 +914,7 @@ i2c1: i2c@4a84000 { compatible = "qcom,geni-i2c"; - reg = <0x04a84000 0x4000>; + reg = <0x0 0x04a84000 0x0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; pinctrl-names = "default"; @@ -848,7 +930,7 @@ spi1: spi@4a84000 { compatible = "qcom,geni-spi"; - reg = <0x04a84000 0x4000>; + reg = <0x0 0x04a84000 0x0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; pinctrl-names = "default"; @@ -864,7 +946,7 @@ i2c2: i2c@4a88000 { compatible = "qcom,geni-i2c"; - reg = <0x04a88000 0x4000>; + reg = <0x0 0x04a88000 0x0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; pinctrl-names = "default"; @@ -880,7 +962,7 @@ spi2: spi@4a88000 { compatible = "qcom,geni-spi"; - reg = <0x04a88000 0x4000>; + reg = <0x0 0x04a88000 0x0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; pinctrl-names = "default"; @@ -896,7 +978,7 @@ i2c3: i2c@4a8c000 { compatible = "qcom,geni-i2c"; - reg = <0x04a8c000 0x4000>; + reg = <0x0 0x04a8c000 0x0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; pinctrl-names = "default"; @@ -912,7 +994,7 @@ spi3: spi@4a8c000 { compatible = "qcom,geni-spi"; - reg = <0x04a8c000 0x4000>; + reg = <0x0 0x04a8c000 0x0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; pinctrl-names = "default"; @@ -928,7 +1010,7 @@ i2c4: i2c@4a90000 { compatible = "qcom,geni-i2c"; - reg = <0x04a90000 0x4000>; + reg = <0x0 0x04a90000 0x0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; pinctrl-names = "default"; @@ -944,7 +1026,7 @@ spi4: spi@4a90000 { compatible = "qcom,geni-spi"; - reg = <0x04a90000 0x4000>; + reg = <0x0 0x04a90000 0x0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; pinctrl-names = "default"; @@ -958,9 +1040,18 @@ status = "disabled"; }; + uart4: serial@4a90000 { + compatible = "qcom,geni-debug-uart"; + reg = <0x0 0x04a90000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + i2c5: i2c@4a94000 { compatible = "qcom,geni-i2c"; - reg = <0x04a94000 0x4000>; + reg = <0x0 0x04a94000 0x0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; pinctrl-names = "default"; @@ -976,7 +1067,7 @@ spi5: spi@4a94000 { compatible = "qcom,geni-spi"; - reg = <0x04a94000 0x4000>; + reg = <0x0 0x04a94000 0x0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; pinctrl-names = "default"; @@ -987,15 +1078,14 @@ dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; - status = "disabled"; }; }; usb_1: usb@4ef8800 { compatible = "qcom,sm6115-dwc3", "qcom,dwc3"; - reg = <0x04ef8800 0x400>; - #address-cells = <1>; - #size-cells = <1>; + reg = <0x0 0x04ef8800 0x0 0x400>; + #address-cells = <2>; + #size-cells = <2>; ranges; clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, @@ -1021,7 +1111,7 @@ usb_1_dwc3: usb@4e00000 { compatible = "snps,dwc3"; - reg = <0x04e00000 0xcd00>; + reg = <0x0 0x04e00000 0x0 0xcd00>; interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>; phys = <&usb_1_hsphy>; phy-names = "usb2-phy"; @@ -1038,7 +1128,7 @@ mdss: display-subsystem@5e00000 { compatible = "qcom,sm6115-mdss"; - reg = <0x05e00000 0x1000>; + reg = <0x0 0x05e00000 0x0 0x1000>; reg-names = "mdss"; power-domains = <&dispcc MDSS_GDSC>; @@ -1054,16 +1144,16 @@ iommus = <&apps_smmu 0x420 0x2>, <&apps_smmu 0x421 0x0>; - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; ranges; status = "disabled"; mdp: display-controller@5e01000 { compatible = "qcom,sm6115-dpu"; - reg = <0x05e01000 0x8f000>, - <0x05eb0000 0x2008>; + reg = <0x0 0x05e01000 0x0 0x8f000>, + <0x0 0x05eb0000 0x0 0x2008>; reg-names = "mdp", "vbif"; clocks = <&gcc GCC_DISP_HF_AXI_CLK>, @@ -1092,7 +1182,7 @@ port@0 { reg = <0>; dpu_intf1_out: endpoint { - remote-endpoint = <&dsi0_in>; + remote-endpoint = <&mdss_dsi0_in>; }; }; }; @@ -1127,9 +1217,9 @@ }; }; - dsi0: dsi@5e94000 { + mdss_dsi0: dsi@5e94000 { compatible = "qcom,dsi-ctrl-6g-qcm2290"; - reg = <0x05e94000 0x400>; + reg = <0x0 0x05e94000 0x0 0x400>; reg-names = "dsi_ctrl"; interrupt-parent = <&mdss>; @@ -1150,11 +1240,11 @@ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; - assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; operating-points-v2 = <&dsi_opp_table>; power-domains = <&rpmpd SM6115_VDDCX>; - phys = <&dsi0_phy>; + phys = <&mdss_dsi0_phy>; #address-cells = <1>; #size-cells = <0>; @@ -1167,14 +1257,14 @@ port@0 { reg = <0>; - dsi0_in: endpoint { + mdss_dsi0_in: endpoint { remote-endpoint = <&dpu_intf1_out>; }; }; port@1 { reg = <1>; - dsi0_out: endpoint { + mdss_dsi0_out: endpoint { }; }; }; @@ -1199,11 +1289,11 @@ }; }; - dsi0_phy: phy@5e94400 { + mdss_dsi0_phy: phy@5e94400 { compatible = "qcom,dsi-phy-14nm-2290"; - reg = <0x05e94400 0x100>, - <0x05e94500 0x300>, - <0x05e94800 0x188>; + reg = <0x0 0x05e94400 0x0 0x100>, + <0x0 0x05e94500 0x0 0x300>, + <0x0 0x05e94800 0x0 0x188>; reg-names = "dsi_phy", "dsi_phy_lane", "dsi_pll"; @@ -1221,20 +1311,632 @@ dispcc: clock-controller@5f00000 { compatible = "qcom,sm6115-dispcc"; - reg = <0x05f00000 0x20000>; + reg = <0x0 0x05f00000 0 0x20000>; clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>, - <&dsi0_phy 0>, - <&dsi0_phy 1>, + <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>, <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>; #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; }; + stm@8002000 { + compatible = "arm,coresight-stm", "arm,primecell"; + reg = <0x0 0x08002000 0x0 0x1000>, + <0x0 0x0e280000 0x0 0x180000>; + reg-names = "stm-base", "stm-stimulus-base"; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + + out-ports { + port { + stm_out: endpoint { + remote-endpoint = <&funnel_in0_in>; + }; + }; + }; + }; + + cti0: cti@8010000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x08010000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + }; + + cti1: cti@8011000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x08011000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + }; + + cti2: cti@8012000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x08012000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + }; + + cti3: cti@8013000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x08013000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + }; + + cti4: cti@8014000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x08014000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + }; + + cti5: cti@8015000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x08015000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + }; + + cti6: cti@8016000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x08016000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + }; + + cti7: cti@8017000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x08017000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + }; + + cti8: cti@8018000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x08018000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + }; + + cti9: cti@8019000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x08019000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + }; + + cti10: cti@801a000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x0801a000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + }; + + cti11: cti@801b000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x0801b000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + }; + + cti12: cti@801c000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x0801c000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + }; + + cti13: cti@801d000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x0801d000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + }; + + cti14: cti@801e000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x0801e000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + }; + + cti15: cti@801f000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x0801f000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + }; + + replicator@8046000 { + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; + reg = <0x0 0x08046000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + + out-ports { + port { + replicator_out: endpoint { + remote-endpoint = <&etr_in>; + }; + }; + }; + + in-ports { + port { + replicator_in: endpoint { + remote-endpoint = <&etf_out>; + }; + }; + }; + }; + + etf@8047000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0x0 0x08047000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + + in-ports { + port { + etf_in: endpoint { + remote-endpoint = <&merge_funnel_out>; + }; + }; + }; + + out-ports { + port { + etf_out: endpoint { + remote-endpoint = <&replicator_in>; + }; + }; + }; + }; + + etr@8048000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0x0 0x08048000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + + in-ports { + port { + etr_in: endpoint { + remote-endpoint = <&replicator_out>; + }; + }; + }; + }; + + funnel@8041000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x08041000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + + out-ports { + port { + funnel_in0_out: endpoint { + remote-endpoint = <&merge_funnel_in0>; + }; + }; + }; + + in-ports { + port { + funnel_in0_in: endpoint { + remote-endpoint = <&stm_out>; + }; + }; + }; + }; + + funnel@8042000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x08042000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + + out-ports { + port { + funnel_in1_out: endpoint { + remote-endpoint = <&merge_funnel_in1>; + }; + }; + }; + + in-ports { + port { + funnel_in1_in: endpoint { + remote-endpoint = <&funnel_apss1_out>; + }; + }; + }; + }; + + funnel@8045000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x08045000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + + out-ports { + port { + merge_funnel_out: endpoint { + remote-endpoint = <&etf_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + merge_funnel_in0: endpoint { + remote-endpoint = <&funnel_in0_out>; + }; + }; + + port@1 { + reg = <1>; + merge_funnel_in1: endpoint { + remote-endpoint = <&funnel_in1_out>; + }; + }; + }; + }; + + etm@9040000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x0 0x09040000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + + cpu = <&CPU0>; + + status = "disabled"; + + out-ports { + port { + etm0_out: endpoint { + remote-endpoint = <&funnel_apss0_in0>; + }; + }; + }; + }; + + etm@9140000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x0 0x09140000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + + cpu = <&CPU1>; + + status = "disabled"; + + out-ports { + port { + etm1_out: endpoint { + remote-endpoint = <&funnel_apss0_in1>; + }; + }; + }; + }; + + etm@9240000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x0 0x09240000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + + cpu = <&CPU2>; + + status = "disabled"; + + out-ports { + port { + etm2_out: endpoint { + remote-endpoint = <&funnel_apss0_in2>; + }; + }; + }; + }; + + etm@9340000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x0 0x09340000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + + cpu = <&CPU3>; + + status = "disabled"; + + out-ports { + port { + etm3_out: endpoint { + remote-endpoint = <&funnel_apss0_in3>; + }; + }; + }; + }; + + etm@9440000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x0 0x09440000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + + cpu = <&CPU4>; + + status = "disabled"; + + out-ports { + port { + etm4_out: endpoint { + remote-endpoint = <&funnel_apss0_in4>; + }; + }; + }; + }; + + etm@9540000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x0 0x09540000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + + cpu = <&CPU5>; + + status = "disabled"; + + out-ports { + port { + etm5_out: endpoint { + remote-endpoint = <&funnel_apss0_in5>; + }; + }; + }; + }; + + etm@9640000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x0 0x09640000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + + cpu = <&CPU6>; + + status = "disabled"; + + out-ports { + port { + etm6_out: endpoint { + remote-endpoint = <&funnel_apss0_in6>; + }; + }; + }; + }; + + etm@9740000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x0 0x09740000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + + cpu = <&CPU7>; + + status = "disabled"; + + out-ports { + port { + etm7_out: endpoint { + remote-endpoint = <&funnel_apss0_in7>; + }; + }; + }; + }; + + funnel@9800000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x09800000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + + out-ports { + port { + funnel_apss0_out: endpoint { + remote-endpoint = <&funnel_apss1_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + funnel_apss0_in0: endpoint { + remote-endpoint = <&etm0_out>; + }; + }; + + port@1 { + reg = <1>; + funnel_apss0_in1: endpoint { + remote-endpoint = <&etm1_out>; + }; + }; + + port@2 { + reg = <2>; + funnel_apss0_in2: endpoint { + remote-endpoint = <&etm2_out>; + }; + }; + + port@3 { + reg = <3>; + funnel_apss0_in3: endpoint { + remote-endpoint = <&etm3_out>; + }; + }; + + port@4 { + reg = <4>; + funnel_apss0_in4: endpoint { + remote-endpoint = <&etm4_out>; + }; + }; + + port@5 { + reg = <5>; + funnel_apss0_in5: endpoint { + remote-endpoint = <&etm5_out>; + }; + }; + + port@6 { + reg = <6>; + funnel_apss0_in6: endpoint { + remote-endpoint = <&etm6_out>; + }; + }; + + port@7 { + reg = <7>; + funnel_apss0_in7: endpoint { + remote-endpoint = <&etm7_out>; + }; + }; + }; + }; + + funnel@9810000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x09810000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + + out-ports { + port { + funnel_apss1_out: endpoint { + remote-endpoint = <&funnel_in1_in>; + }; + }; + }; + + in-ports { + port { + funnel_apss1_in: endpoint { + remote-endpoint = <&funnel_apss0_out>; + }; + }; + }; + }; + apps_smmu: iommu@c600000 { compatible = "qcom,sm6115-smmu-500", "qcom,smmu-500", "arm,mmu-500"; - reg = <0x0c600000 0x80000>; + reg = <0x0 0x0c600000 0x0 0x80000>; #iommu-cells = <2>; #global-interrupts = <1>; @@ -1307,7 +2009,7 @@ wifi: wifi@c800000 { compatible = "qcom,wcn3990-wifi"; - reg = <0x0c800000 0x800000>; + reg = <0x0 0x0c800000 0x0 0x800000>; reg-names = "membase"; memory-region = <&wlan_msa_mem>; interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>, @@ -1327,65 +2029,72 @@ status = "disabled"; }; + watchdog@f017000 { + compatible = "qcom,apss-wdt-sm6115", "qcom,kpss-wdt"; + reg = <0x0 0x0f017000 0x0 0x1000>; + clocks = <&sleep_clk>; + interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>; + }; + apcs_glb: mailbox@f111000 { compatible = "qcom,sm6115-apcs-hmss-global"; - reg = <0x0f111000 0x1000>; + reg = <0x0 0x0f111000 0x0 0x1000>; #mbox-cells = <1>; }; timer@f120000 { compatible = "arm,armv7-timer-mem"; - reg = <0x0f120000 0x1000>; - #address-cells = <1>; - #size-cells = <1>; + reg = <0x0 0x0f120000 0x0 0x1000>; + #address-cells = <2>; + #size-cells = <2>; ranges; clock-frequency = <19200000>; frame@f121000 { - reg = <0x0f121000 0x1000>, <0x0f122000 0x1000>; + reg = <0x0 0x0f121000 0x0 0x1000>, <0x0 0x0f122000 0x0 0x1000>; frame-number = <0>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; }; frame@f123000 { - reg = <0x0f123000 0x1000>; + reg = <0x0 0x0f123000 0x0 0x1000>; frame-number = <1>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; frame@f124000 { - reg = <0x0f124000 0x1000>; + reg = <0x0 0x0f124000 0x0 0x1000>; frame-number = <2>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; frame@f125000 { - reg = <0x0f125000 0x1000>; + reg = <0x0 0x0f125000 0x0 0x1000>; frame-number = <3>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; frame@f126000 { - reg = <0x0f126000 0x1000>; + reg = <0x0 0x0f126000 0x0 0x1000>; frame-number = <4>; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; frame@f127000 { - reg = <0x0f127000 0x1000>; + reg = <0x0 0x0f127000 0x0 0x1000>; frame-number = <5>; interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; frame@f128000 { - reg = <0x0f128000 0x1000>; + reg = <0x0 0x0f128000 0x0 0x1000>; frame-number = <6>; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; @@ -1394,7 +2103,8 @@ intc: interrupt-controller@f200000 { compatible = "arm,gic-v3"; - reg = <0x0f200000 0x10000>, <0x0f300000 0x100000>; + reg = <0x0 0x0f200000 0x0 0x10000>, + <0x0 0x0f300000 0x0 0x100000>; #interrupt-cells = <3>; interrupt-controller; interrupt-parent = <&intc>; @@ -1405,7 +2115,8 @@ cpufreq_hw: cpufreq@f521000 { compatible = "qcom,cpufreq-hw"; - reg = <0x0f521000 0x1000>, <0x0f523000 0x1000>; + reg = <0x0 0x0f521000 0x0 0x1000>, + <0x0 0x0f523000 0x0 0x1000>; reg-names = "freq-domain0", "freq-domain1"; clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GPLL0>; @@ -1415,6 +2126,370 @@ }; }; + thermal-zones { + mapss-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 0>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + cdsp-hvx-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 1>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + wlan-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 2>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + camera-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 3>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + video-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 4>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + modem1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 5>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + cpu4-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 6>; + + trips { + cpu4_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu5-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 7>; + + trips { + cpu5_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu6-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 8>; + + trips { + cpu6_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu7-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 9>; + + trips { + cpu7_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu45-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 10>; + + trips { + cpu45_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu45_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu45_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu67-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 11>; + + trips { + cpu67_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu67_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu67_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu0123-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 12>; + + trips { + cpu0123_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0123_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0123_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + modem0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 13>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + display-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 14>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + gpu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 15>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, diff --git a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts new file mode 100644 index 000000000000..4ce2d905d70e --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts @@ -0,0 +1,289 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (c) 2022 Linaro Limited + */ + +/dts-v1/; + +#include "sm6115.dtsi" +#include "pm6125.dtsi" + +/ { + model = "Lenovo Tab P11"; + compatible = "lenovo,j606f", "qcom,sm6115p", "qcom,sm6115"; + chassis-type = "tablet"; + + /* required for bootloader to select correct board */ + qcom,msm-id = <445 0x10000>, <420 0x10000>; + qcom,board-id = <34 3>; + + aliases { + mmc0 = &sdhc_2; + }; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer0: framebuffer@5c000000 { + compatible = "simple-framebuffer"; + reg = <0 0x5c000000 0 (2000 * 1200 * 4)>; + width = <1200>; + height = <2000>; + stride = <(1200 * 4)>; + format = "a8r8g8b8"; + clocks = <&gcc GCC_DISP_HF_AXI_CLK>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&vol_up_n>; + + key-volume-up { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&pm6125_gpios 5 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + gpio-key,wakeup; + }; + }; +}; + +&dispcc { + /* HACK: disable until a panel driver is ready to retain simplefb */ + status = "disabled"; +}; + +&pm6125_gpios { + vol_up_n: vol-up-n-state { + pins = "gpio5"; + function = "normal"; + power-source = <0>; + bias-pull-up; + input-enable; + }; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&rpm_requests { + regulators-0 { + compatible = "qcom,rpm-pm6125-regulators"; + + pm6125_s6: s6 { + regulator-min-microvolt = <304000>; + regulator-max-microvolt = <1456000>; + }; + + pm6125_s7: s7 { + regulator-min-microvolt = <1280000>; + regulator-max-microvolt = <2080000>; + }; + + pm6125_s8: s8 { + regulator-min-microvolt = <1064000>; + regulator-max-microvolt = <1304000>; + }; + + pm6125_l1: l1 { + regulator-min-microvolt = <952000>; + regulator-max-microvolt = <1152000>; + }; + + pm6125_l4: l4 { + regulator-min-microvolt = <488000>; + regulator-max-microvolt = <1000000>; + }; + + pm6125_l5: l5 { + regulator-min-microvolt = <1648000>; + /* 3.056V capped to 2.96V for SDHCI */ + regulator-max-microvolt = <2960000>; + regulator-allow-set-load; + /* Broken hw, this one can't be turned off or SDHCI will break! */ + regulator-always-on; + }; + + pm6125_l6: l6 { + regulator-min-microvolt = <576000>; + regulator-max-microvolt = <656000>; + }; + + pm6125_l7: l7 { + /* 1.2V-1.304V fixed at 1.256V for SDHCI bias */ + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1256000>; + /* + * TODO: SDHCI seems to also work with this one turned off, however + * there exists a possibility that it may not work with some very + * specific SDCard types, perhaps validating this against a wide + * range of models could rule that out, saving some power would + * certainly be nice.. + */ + regulator-always-on; + }; + + pm6125_l8: l8 { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <728000>; + }; + + pm6125_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + }; + + pm6125_l10: l10 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1904000>; + }; + + pm6125_l11: l11 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1952000>; + }; + + pm6125_l12: l12 { + regulator-min-microvolt = <1624000>; + regulator-max-microvolt = <1984000>; + }; + + pm6125_l13: l13 { + regulator-min-microvolt = <1504000>; + regulator-max-microvolt = <1952000>; + }; + + pm6125_l14: l14 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1904000>; + }; + + pm6125_l15: l15 { + regulator-min-microvolt = <2920000>; + regulator-max-microvolt = <3232000>; + }; + + pm6125_l16: l16 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1904000>; + }; + + pm6125_l17: l17 { + regulator-min-microvolt = <1152000>; + regulator-max-microvolt = <1384000>; + }; + + pm6125_l18: l18 { + regulator-min-microvolt = <1104000>; + regulator-max-microvolt = <1312000>; + }; + + pm6125_l19: l19 { + regulator-min-microvolt = <1624000>; + regulator-max-microvolt = <3304000>; + }; + + pm6125_l20: l20 { + regulator-min-microvolt = <1624000>; + regulator-max-microvolt = <3304000>; + }; + + pm6125_l21: l21 { + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3600000>; + }; + + pm6125_l22: l22 { + regulator-min-microvolt = <2952000>; + /* 3.304V capped to 2.96V for SDHCI */ + regulator-max-microvolt = <2960000>; + regulator-allow-set-load; + /* Broken hw, this one can't be turned off or SDHCI will break! */ + regulator-always-on; + }; + + pm6125_l23: l23 { + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3400000>; + }; + + pm6125_l24: l24 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <3600000>; + }; + }; +}; + +&sdhc_2 { + cd-gpios = <&tlmm 88 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_state_on &sdc2_gate_pin>; + pinctrl-1 = <&sdc2_state_off>; + vmmc-supply = <&pm6125_l22>; + vqmmc-supply = <&pm6125_l5>; + no-sdio; + no-mmc; + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32764>; +}; + +&tlmm { + gpio-reserved-ranges = <14 4>; + + /* + * This is a wholly undocumented pin (other than a single vague "pwr-gpios" reference) + * that needs to be toggled for the SD Card slot to work properly.. + */ + sdc2_gate_pin: sdc2-gate-state { + pins = "gpio45"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + output-high; + }; +}; + +&ufs_mem_hc { + vcc-supply = <&pm6125_l24>; + vcc-max-microamp = <600000>; + vccq2-supply = <&pm6125_l11>; + vccq2-max-microamp = <600000>; + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&pm6125_l4>; + vdda-pll-supply = <&pm6125_l12>; + vddp-ref-clk-supply = <&pm6125_l18>; + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_hsphy { + vdd-supply = <&pm6125_l4>; + vdda-pll-supply = <&pm6125_l12>; + vdda-phy-dpdm-supply = <&pm6125_l15>; + status = "okay"; +}; + +&xo_board { + clock-frequency = <19200000>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts index 0de6c5b7f742..b22b3f9a910d 100644 --- a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts +++ b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts @@ -20,6 +20,11 @@ compatible = "sony,pdx201", "qcom,sm6125"; chassis-type = "handset"; + aliases { + mmc0 = &sdhc_1; /* SDC1 eMMC slot */ + mmc1 = &sdhc_2; /* SDC2 SD card slot */ + }; + chosen { #address-cells = <2>; #size-cells = <2>; @@ -41,21 +46,22 @@ }; gpio-keys { - status = "okay"; compatible = "gpio-keys"; - autorepeat; - key-vol-dn { + pinctrl-0 = <&vol_down_n>; + pinctrl-names = "default"; + + key-volume-down { label = "Volume Down"; gpios = <&tlmm 47 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; linux,code = <KEY_VOLUMEDOWN>; - gpio-key,wakeup; debounce-interval = <15>; + linux,can-disable; + wakeup-source; }; }; - reserved_memory { + reserved-memory { #address-cells = <2>; #size-cells = <2>; debug_mem: memory@ffb00000 { @@ -141,10 +147,38 @@ }; }; +&gpi_dma0 { + status = "okay"; +}; + &hsusb_phy1 { + vdd-supply = <&pm6125_l7>; + vdda-pll-supply = <&pm6125_l10>; + vdda-phy-dpdm-supply = <&pm6125_l15>; status = "okay"; }; +&i2c1 { + clock-frequency = <400000>; + status = "okay"; + + /* NXP PN553 NFC @ 28 */ +}; + +&i2c2 { + clock-frequency = <400000>; + status = "okay"; + + /* Samsung touchscreen @ 48 */ +}; + +&i2c3 { + clock-frequency = <1000000>; + status = "okay"; + + /* Cirrus Logic CS35L41 boosted audio amplifier @ 40 */ +}; + &pm6125_adc { pinctrl-names = "default"; pinctrl-0 = <&camera_flash_therm &emmc_ufs_therm &rf_pa1_therm>; @@ -217,7 +251,7 @@ }; }; -&pm6125_gpio { +&pm6125_gpios { camera_flash_therm: camera-flash-therm-state { pins = "gpio3"; function = PMIC_GPIO_FUNC_NORMAL; @@ -246,6 +280,153 @@ linux,code = <KEY_VOLUMEUP>; }; +&rpm_requests { + regulators-0 { + compatible = "qcom,rpm-pm6125-regulators"; + + vdd_l2_l3_l4-supply = <&pm6125_l7>; + vdd_l5_l15_l19_l20_l21_l22-supply = <&pm6125_l10>; + + /* + * S3/S4 is VDD_CX + * S5 is VDD_MX/WCSS_MX + */ + + pm6125_s6: s6 { + regulator-min-microvolt = <936000>; + regulator-max-microvolt = <1422000>; + }; + + pm6125_l1: l1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1256000>; + }; + + pm6125_l2: l2 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1056000>; + }; + + pm6125_l3: l3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1064000>; + }; + + pm6125_l4: l4 { + regulator-min-microvolt = <872000>; + regulator-max-microvolt = <976000>; + }; + + pm6125_l5: l5 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + }; + + pm6125_l6: l6 { + regulator-min-microvolt = <576000>; + regulator-max-microvolt = <656000>; + }; + + pm6125_l7: l7 { + regulator-min-microvolt = <872000>; + regulator-max-microvolt = <976000>; + }; + + pm6125_l8: l8 { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <728000>; + }; + + pm6125_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1896000>; + }; + + pm6125_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1896000>; + }; + + pm6125_l11: l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + }; + + pm6125_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1996000>; + }; + + pm6125_l13: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1832000>; + }; + + pm6125_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1904000>; + }; + + pm6125_l15: l15 { + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3232000>; + }; + + pm6125_l16: l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1904000>; + }; + + pm6125_l17: l17 { + regulator-min-microvolt = <1248000>; + regulator-max-microvolt = <1304000>; + }; + + pm6125_l18: l18 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1264000>; + }; + + pm6125_l19: l19 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <2952000>; + }; + + pm6125_l20: l20 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <2952000>; + }; + + pm6125_l21: l21 { + regulator-min-microvolt = <2600000>; + regulator-max-microvolt = <2856000>; + }; + + pm6125_l22: l22 { + regulator-min-microvolt = <2944000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + }; + + pm6125_l23: l23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3400000>; + }; + + pm6125_l24: l24 { + regulator-min-microvolt = <2944000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + }; + }; +}; + +&qupv3_id_0 { + status = "okay"; +}; + &sdc2_off_state { sd-cd-pins { pins = "gpio98"; @@ -265,11 +446,30 @@ }; &sdhc_1 { + vmmc-supply = <&pm6125_l24>; + vqmmc-supply = <&pm6125_l11>; + status = "okay"; +}; + +&sdhc_2 { + cd-gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>; + vmmc-supply = <&pm6125_l22>; + vqmmc-supply = <&pm6125_l5>; + no-sdio; + no-mmc; status = "okay"; }; &tlmm { gpio-reserved-ranges = <22 2>, <28 6>; + + vol_down_n: vol-down-n-state { + pins = "gpio47"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + input-enable; + }; }; &usb3 { diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi index 7e25a4f85594..65033227718a 100644 --- a/arch/arm64/boot/dts/qcom/sm6125.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi @@ -5,6 +5,7 @@ #include <dt-bindings/clock/qcom,gcc-sm6125.h> #include <dt-bindings/clock/qcom,rpmcc.h> +#include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/qcom-rpmpd.h> @@ -45,6 +46,7 @@ next-level-cache = <&L2_0>; L2_0: l2-cache { compatible = "cache"; + cache-level = <2>; }; }; @@ -84,6 +86,7 @@ next-level-cache = <&L2_1>; L2_1: l2-cache { compatible = "cache"; + cache-level = <2>; }; }; @@ -425,6 +428,230 @@ bias-pull-up; }; }; + + qup_i2c0_default: qup-i2c0-default-state { + pins = "gpio0", "gpio1"; + function = "qup00"; + drive-strength = <2>; + bias-disable; + }; + + qup_i2c0_sleep: qup-i2c0-sleep-state { + pins = "gpio0", "gpio1"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c1_default: qup-i2c1-default-state { + pins = "gpio4", "gpio5"; + function = "qup01"; + drive-strength = <2>; + bias-disable; + }; + + qup_i2c1_sleep: qup-i2c1-sleep-state { + pins = "gpio4", "gpio5"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c2_default: qup-i2c2-default-state { + pins = "gpio6", "gpio7"; + function = "qup02"; + drive-strength = <2>; + bias-disable; + }; + + qup_i2c2_sleep: qup-i2c2-sleep-state { + pins = "gpio6", "gpio7"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c3_default: qup-i2c3-default-state { + pins = "gpio14", "gpio15"; + function = "qup03"; + drive-strength = <2>; + bias-disable; + }; + + qup_i2c3_sleep: qup-i2c3-sleep-state { + pins = "gpio14", "gpio15"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c4_default: qup-i2c4-default-state { + pins = "gpio16", "gpio17"; + function = "qup04"; + drive-strength = <2>; + bias-disable; + }; + + qup_i2c4_sleep: qup-i2c4-sleep-state { + pins = "gpio16", "gpio17"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c5_default: qup-i2c5-default-state { + pins = "gpio22", "gpio23"; + function = "qup10"; + drive-strength = <2>; + bias-disable; + }; + + qup_i2c5_sleep: qup-i2c5-sleep-state { + pins = "gpio22", "gpio23"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c6_default: qup-i2c6-default-state { + pins = "gpio30", "gpio31"; + function = "qup11"; + drive-strength = <2>; + bias-disable; + }; + + qup_i2c6_sleep: qup-i2c6-sleep-state { + pins = "gpio30", "gpio31"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c7_default: qup-i2c7-default-state { + pins = "gpio28", "gpio29"; + function = "qup12"; + drive-strength = <2>; + bias-disable; + }; + + qup_i2c7_sleep: qup-i2c7-sleep-state { + pins = "gpio28", "gpio29"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c8_default: qup-i2c8-default-state { + pins = "gpio18", "gpio19"; + function = "qup13"; + drive-strength = <2>; + bias-disable; + }; + + qup_i2c8_sleep: qup-i2c8-sleep-state { + pins = "gpio18", "gpio19"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c9_default: qup-i2c9-default-state { + pins = "gpio10", "gpio11"; + function = "qup14"; + drive-strength = <2>; + bias-disable; + }; + + qup_i2c9_sleep: qup-i2c9-sleep-state { + pins = "gpio10", "gpio11"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi0_default: qup-spi0-default-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "qup00"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi0_sleep: qup-spi0-sleep-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "gpio"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi2_default: qup-spi2-default-state { + pins = "gpio6", "gpio7", "gpio8", "gpio9"; + function = "qup02"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi2_sleep: qup-spi2-sleep-state { + pins = "gpio6", "gpio7", "gpio8", "gpio9"; + function = "gpio"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi5_default: qup-spi5-default-state { + pins = "gpio22", "gpio23", "gpio24", "gpio25"; + function = "qup10"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi5_sleep: qup-spi5-sleep-state { + pins = "gpio22", "gpio23", "gpio24", "gpio25"; + function = "gpio"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi6_default: qup-spi6-default-state { + pins = "gpio30", "gpio31", "gpio32", "gpio33"; + function = "qup11"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi6_sleep: qup-spi6-sleep-state { + pins = "gpio30", "gpio31", "gpio32", "gpio33"; + function = "gpio"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi8_default: qup-spi8-default-state { + pins = "gpio18", "gpio19", "gpio20", "gpio21"; + function = "qup13"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi8_sleep: qup-spi8-sleep-state { + pins = "gpio18", "gpio19", "gpio20", "gpio21"; + function = "gpio"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi9_default: qup-spi9-default-state { + pins = "gpio10", "gpio11", "gpio12", "gpio13"; + function = "qup14"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi9_sleep: qup-spi9-sleep-state { + pins = "gpio10", "gpio11", "gpio12", "gpio13"; + function = "gpio"; + drive-strength = <6>; + bias-disable; + }; }; gcc: clock-controller@1400000 { @@ -442,9 +669,9 @@ reg = <0x01613000 0x180>; #phy-cells = <0>; - clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, - <&gcc GCC_AHB2PHY_USB_CLK>; - clock-names = "ref", "cfg_ahb"; + clocks = <&gcc GCC_AHB2PHY_USB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "cfg_ahb", "ref"; resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; status = "disabled"; @@ -468,6 +695,7 @@ <&gcc GCC_SDCC1_APPS_CLK>, <&xo_board>; clock-names = "iface", "core", "xo"; + iommus = <&apps_smmu 0x160 0x0>; power-domains = <&rpmpd SM6125_VDDCX>; @@ -494,6 +722,7 @@ <&gcc GCC_SDCC2_APPS_CLK>, <&xo_board>; clock-names = "iface", "core", "xo"; + iommus = <&apps_smmu 0x180 0x0>; pinctrl-0 = <&sdc2_on_state>; pinctrl-1 = <&sdc2_off_state>; @@ -508,6 +737,340 @@ status = "disabled"; }; + gpi_dma0: dma-controller@4a00000 { + compatible = "qcom,sm6125-gpi-dma", "qcom,sdm845-gpi-dma"; + reg = <0x04a00000 0x60000>; + interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <8>; + dma-channel-mask = <0x1f>; + iommus = <&apps_smmu 0x136 0x0>; + #dma-cells = <3>; + status = "disabled"; + }; + + qupv3_id_0: geniqup@4ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x04ac0000 0x2000>; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + clock-names = "m-ahb", "s-ahb"; + iommus = <&apps_smmu 0x123 0x0>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + status = "disabled"; + + i2c0: i2c@4a80000 { + compatible = "qcom,geni-i2c"; + reg = <0x04a80000 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&qup_i2c0_default>; + pinctrl-1 = <&qup_i2c0_sleep>; + pinctrl-names = "default", "sleep"; + dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, + <&gpi_dma0 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi0: spi@4a80000 { + compatible = "qcom,geni-spi"; + reg = <0x04a80000 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&qup_spi0_default>; + pinctrl-1 = <&qup_spi0_sleep>; + pinctrl-names = "default", "sleep"; + dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>, + <&gpi_dma0 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@4a84000 { + compatible = "qcom,geni-i2c"; + reg = <0x04a84000 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&qup_i2c1_default>; + pinctrl-1 = <&qup_i2c1_sleep>; + pinctrl-names = "default", "sleep"; + dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, + <&gpi_dma0 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@4a88000 { + compatible = "qcom,geni-i2c"; + reg = <0x04a88000 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&qup_i2c2_default>; + pinctrl-1 = <&qup_i2c2_sleep>; + pinctrl-names = "default", "sleep"; + dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, + <&gpi_dma0 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi2: spi@4a88000 { + compatible = "qcom,geni-spi"; + reg = <0x04a88000 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&qup_spi2_default>; + pinctrl-1 = <&qup_spi2_sleep>; + pinctrl-names = "default", "sleep"; + dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, + <&gpi_dma0 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@4a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0x04a8c000 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&qup_i2c3_default>; + pinctrl-1 = <&qup_i2c3_sleep>; + pinctrl-names = "default", "sleep"; + dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, + <&gpi_dma0 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@4a90000 { + compatible = "qcom,geni-i2c"; + reg = <0x04a90000 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&qup_i2c4_default>; + pinctrl-1 = <&qup_i2c4_sleep>; + pinctrl-names = "default", "sleep"; + dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, + <&gpi_dma0 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + gpi_dma1: dma-controller@4c00000 { + compatible = "qcom,sm6125-gpi-dma", "qcom,sdm845-gpi-dma"; + reg = <0x04c00000 0x60000>; + interrupts = <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <8>; + dma-channel-mask = <0x0f>; + iommus = <&apps_smmu 0x156 0x0>; + #dma-cells = <3>; + status = "disabled"; + }; + + qupv3_id_1: geniqup@4cc0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x04cc0000 0x2000>; + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + clock-names = "m-ahb", "s-ahb"; + iommus = <&apps_smmu 0x143 0x0>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + status = "disabled"; + + i2c5: i2c@4c80000 { + compatible = "qcom,geni-i2c"; + reg = <0x04c80000 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&qup_i2c5_default>; + pinctrl-1 = <&qup_i2c5_sleep>; + pinctrl-names = "default", "sleep"; + dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, + <&gpi_dma1 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi5: spi@4c80000 { + compatible = "qcom,geni-spi"; + reg = <0x04c80000 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&qup_spi5_default>; + pinctrl-1 = <&qup_spi5_sleep>; + pinctrl-names = "default", "sleep"; + dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>, + <&gpi_dma1 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c6: i2c@4c84000 { + compatible = "qcom,geni-i2c"; + reg = <0x04c84000 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&qup_i2c6_default>; + pinctrl-1 = <&qup_i2c6_sleep>; + pinctrl-names = "default", "sleep"; + dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, + <&gpi_dma1 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi6: spi@4c84000 { + compatible = "qcom,geni-spi"; + reg = <0x04c84000 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&qup_spi6_default>; + pinctrl-1 = <&qup_spi6_sleep>; + pinctrl-names = "default", "sleep"; + dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>, + <&gpi_dma1 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c7: i2c@4c88000 { + compatible = "qcom,geni-i2c"; + reg = <0x04c88000 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&qup_i2c7_default>; + pinctrl-1 = <&qup_i2c7_sleep>; + pinctrl-names = "default", "sleep"; + dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, + <&gpi_dma1 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c8: i2c@4c8c000 { + compatible = "qcom,geni-i2c"; + reg = <0x04c8c000 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&qup_i2c8_default>; + pinctrl-1 = <&qup_i2c8_sleep>; + pinctrl-names = "default", "sleep"; + dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, + <&gpi_dma1 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi8: spi@4c8c000 { + compatible = "qcom,geni-spi"; + reg = <0x04c8c000 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&qup_spi8_default>; + pinctrl-1 = <&qup_spi8_sleep>; + pinctrl-names = "default", "sleep"; + dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>, + <&gpi_dma1 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c9: i2c@4c90000 { + compatible = "qcom,geni-i2c"; + reg = <0x04c90000 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&qup_i2c9_default>; + pinctrl-1 = <&qup_i2c9_sleep>; + pinctrl-names = "default", "sleep"; + dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, + <&gpi_dma1 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi9: spi@4c90000 { + compatible = "qcom,geni-spi"; + reg = <0x04c90000 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&qup_spi9_default>; + pinctrl-1 = <&qup_spi9_sleep>; + pinctrl-names = "default", "sleep"; + dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>, + <&gpi_dma1 1 4 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + usb3: usb@4ef8800 { compatible = "qcom,sm6125-dwc3", "qcom,dwc3"; reg = <0x04ef8800 0x400>; @@ -540,6 +1103,7 @@ compatible = "snps,dwc3"; reg = <0x04e00000 0xcd00>; interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x100 0x0>; phys = <&hsusb_phy1>; phy-names = "usb2-phy"; snps,dis_u2_susphy_quirk; @@ -573,6 +1137,79 @@ cell-index = <0>; }; + apps_smmu: iommu@c600000 { + compatible = "qcom,sm6125-smmu-500", "qcom,smmu-500", "arm,mmu-500"; + reg = <0xc600000 0x80000>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; + + #global-interrupts = <1>; + #iommu-cells = <2>; + }; + apcs_glb: mailbox@f111000 { compatible = "qcom,sm6125-apcs-hmss-global"; reg = <0x0f111000 0x1000>; diff --git a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts index 94f77d376662..4916d0db5b47 100644 --- a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts +++ b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts @@ -35,10 +35,10 @@ gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; - pinctrl-0 = <&gpio_keys_state>; + pinctrl-0 = <&vol_down_n>; key-volume-down { - label = "volume_down"; + label = "Volume Down"; linux,code = <KEY_VOLUMEDOWN>; gpios = <&pm6350_gpios 2 GPIO_ACTIVE_LOW>; }; @@ -305,14 +305,12 @@ }; &pm6350_gpios { - gpio_keys_state: gpio-keys-state { - key-volume-down-pins { - pins = "gpio2"; - function = PMIC_GPIO_FUNC_NORMAL; - power-source = <0>; - bias-disable; - input-enable; - }; + vol_down_n: vol-down-n-state { + pins = "gpio2"; + function = PMIC_GPIO_FUNC_NORMAL; + power-source = <0>; + bias-disable; + input-enable; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi index 43324bf291c3..1e1d366c92c1 100644 --- a/arch/arm64/boot/dts/qcom/sm6350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi @@ -6,11 +6,15 @@ #include <dt-bindings/clock/qcom,gcc-sm6350.h> #include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/clock/qcom,sm6350-camcc.h> #include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interconnect/qcom,icc.h> +#include <dt-bindings/interconnect/qcom,osm-l3.h> #include <dt-bindings/interconnect/qcom,sm6350.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/mailbox/qcom-ipcc.h> +#include <dt-bindings/phy/phy-qcom-qmp.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> @@ -47,12 +51,18 @@ dynamic-power-coefficient = <100>; next-level-cache = <&L2_0>; qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY + &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; L2_0: l2-cache { compatible = "cache"; + cache-level = <2>; next-level-cache = <&L3_0>; L3_0: l3-cache { compatible = "cache"; + cache-level = <3>; }; }; }; @@ -66,9 +76,14 @@ dynamic-power-coefficient = <100>; next-level-cache = <&L2_100>; qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY + &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; L2_100: l2-cache { compatible = "cache"; + cache-level = <2>; next-level-cache = <&L3_0>; }; }; @@ -82,9 +97,14 @@ dynamic-power-coefficient = <100>; next-level-cache = <&L2_200>; qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY + &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; L2_200: l2-cache { compatible = "cache"; + cache-level = <2>; next-level-cache = <&L3_0>; }; }; @@ -98,9 +118,14 @@ dynamic-power-coefficient = <100>; next-level-cache = <&L2_300>; qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY + &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; L2_300: l2-cache { compatible = "cache"; + cache-level = <2>; next-level-cache = <&L3_0>; }; }; @@ -114,9 +139,14 @@ dynamic-power-coefficient = <100>; next-level-cache = <&L2_400>; qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY + &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; L2_400: l2-cache { compatible = "cache"; + cache-level = <2>; next-level-cache = <&L3_0>; }; }; @@ -130,9 +160,14 @@ dynamic-power-coefficient = <100>; next-level-cache = <&L2_500>; qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY + &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; L2_500: l2-cache { compatible = "cache"; + cache-level = <2>; next-level-cache = <&L3_0>; }; @@ -147,9 +182,14 @@ dynamic-power-coefficient = <703>; next-level-cache = <&L2_600>; qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu6_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY + &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; L2_600: l2-cache { compatible = "cache"; + cache-level = <2>; next-level-cache = <&L3_0>; }; }; @@ -163,9 +203,14 @@ dynamic-power-coefficient = <703>; next-level-cache = <&L2_700>; qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu6_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY + &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; L2_700: l2-cache { compatible = "cache"; + cache-level = <2>; next-level-cache = <&L3_0>; }; }; @@ -220,6 +265,112 @@ reg = <0x0 0x80000000 0x0 0x0>; }; + cpu0_opp_table: opp-table-cpu0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + /* DDR: 4-wide, 2 channels, double data rate, L3: 16-wide, 2 channels */ + opp-peak-kBps = <(200000 * 4 * 2 * 2) (300000 * 16 * 2)>; + }; + + opp-576000000 { + opp-hz = /bits/ 64 <576000000>; + opp-peak-kBps = <(547000 * 4 * 2 * 2) (556800 * 16 * 2)>; + }; + + opp-768000000 { + opp-hz = /bits/ 64 <768000000>; + opp-peak-kBps = <(768000 * 4 * 2 * 2) (652800 * 16 * 2)>; + }; + + opp-1017600000 { + opp-hz = /bits/ 64 <1017600000>; + opp-peak-kBps = <(1017000 * 4 * 2 * 2) (940800 * 16 * 2)>; + }; + + opp-1248000000 { + opp-hz = /bits/ 64 <1248000000>; + opp-peak-kBps = <(1017000 * 4 * 2 * 2) (1209600 * 16 * 2)>; + }; + + opp-1324800000 { + opp-hz = /bits/ 64 <1324800000>; + opp-peak-kBps = <(1017000 * 4 * 2 * 2) (1286400 * 16 * 2)>; + }; + + opp-1516800000 { + opp-hz = /bits/ 64 <1516800000>; + opp-peak-kBps = <(1353000 * 4 * 2 * 2) (1459200 * 16 * 2)>; + }; + + opp-1612800000 { + opp-hz = /bits/ 64 <1612800000>; + opp-peak-kBps = <(1555000 * 4 * 2 * 2) (1459200 * 16 * 2)>; + }; + + opp-1708800000 { + opp-hz = /bits/ 64 <1708800000>; + opp-peak-kBps = <(1555000 * 4 * 2 * 2) (1459200 * 16 * 2)>; + }; + }; + + cpu6_opp_table: opp-table-cpu6 { + compatible = "operating-points-v2"; + opp-shared; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-peak-kBps = <(200000 * 4 * 2 * 2) (300000 * 16 * 2)>; + }; + + opp-787200000 { + opp-hz = /bits/ 64 <787200000>; + opp-peak-kBps = <(768000 * 4 * 2 * 2) (652800 * 16 * 2)>; + }; + + opp-979200000 { + opp-hz = /bits/ 64 <979200000>; + opp-peak-kBps = <(768000 * 4 * 2 * 2) (940800 * 16 * 2)>; + }; + + opp-1036800000 { + opp-hz = /bits/ 64 <1036800000>; + opp-peak-kBps = <(1017000 * 4 * 2 * 2) (940800 * 16 * 2)>; + }; + + opp-1248000000 { + opp-hz = /bits/ 64 <1248000000>; + opp-peak-kBps = <(1017000 * 4 * 2 * 2) (1209600 * 16 * 2)>; + }; + + opp-1401600000 { + opp-hz = /bits/ 64 <1401600000>; + opp-peak-kBps = <(1353000 * 4 * 2 * 2) (1401600 * 16 * 2)>; + }; + + opp-1555200000 { + opp-hz = /bits/ 64 <1555200000>; + opp-peak-kBps = <(1555000 * 4 * 2 * 2) (1459200 * 16 * 2)>; + }; + + opp-1766400000 { + opp-hz = /bits/ 64 <1766400000>; + opp-peak-kBps = <(1555000 * 4 * 2 * 2) (1459200 * 16 * 2)>; + }; + + opp-1900800000 { + opp-hz = /bits/ 64 <1900800000>; + opp-peak-kBps = <(1804000 * 4 * 2 * 2) (1459200 * 16 * 2)>; + }; + + opp-2073600000 { + opp-hz = /bits/ 64 <2073600000>; + opp-peak-kBps = <(2092000 * 4 * 2 * 2) (1459200 * 16 * 2)>; + }; + }; + pmu { compatible = "arm,armv8-pmuv3"; interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_LOW>; @@ -342,13 +493,12 @@ }; ramoops: ramoops@ffc00000 { - compatible = "removed-dma-pool", "ramoops"; - reg = <0 0xffc00000 0 0x00100000>; + compatible = "ramoops"; + reg = <0 0xffc00000 0 0x100000>; record-size = <0x1000>; console-size = <0x40000>; - ftrace-size = <0x0>; msg-size = <0x20000 0x20000>; - cc-size = <0x0>; + ecc-size = <16>; no-map; }; @@ -432,7 +582,17 @@ modem_smp2p_in: slave-kernel { qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + + ipa_smp2p_out: ipa-ap-to-modem { + qcom,entry-name = "ipa"; + #qcom,smem-state-cells = <1>; + }; + ipa_smp2p_in: ipa-modem-to-ap { + qcom,entry-name = "ipa"; interrupt-controller; #interrupt-cells = <2>; }; @@ -544,7 +704,7 @@ qupv3_id_0: geniqup@8c0000 { compatible = "qcom,geni-se-qup"; - reg = <0x0 0x8c0000 0x0 0x2000>; + reg = <0x0 0x008c0000 0x0 0x2000>; clock-names = "m-ahb", "s-ahb"; clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; @@ -617,7 +777,7 @@ qupv3_id_1: geniqup@9c0000 { compatible = "qcom,geni-se-qup"; - reg = <0x0 0x9c0000 0x0 0x2000>; + reg = <0x0 0x009c0000 0x0 0x2000>; clock-names = "m-ahb", "s-ahb"; clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; @@ -689,7 +849,7 @@ uart9: serial@98c000 { compatible = "qcom,geni-debug-uart"; - reg = <0 0x98c000 0 0x4000>; + reg = <0 0x0098c000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; pinctrl-names = "default"; @@ -847,6 +1007,43 @@ }; }; + ipa: ipa@1e40000 { + compatible = "qcom,sm6350-ipa"; + + iommus = <&apps_smmu 0x440 0x0>, + <&apps_smmu 0x442 0x0>; + reg = <0 0x01e40000 0 0x8000>, + <0 0x01e50000 0 0x3000>, + <0 0x01e04000 0 0x23000>; + reg-names = "ipa-reg", + "ipa-shared", + "gsi"; + + interrupts-extended = <&intc GIC_SPI 311 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>, + <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "ipa", + "gsi", + "ipa-clock-query", + "ipa-setup-ready"; + + clocks = <&rpmhcc RPMH_IPA_CLK>; + clock-names = "core"; + + interconnects = <&aggre2_noc MASTER_IPA 0 &clk_virt SLAVE_EBI_CH0 0>, + <&aggre2_noc MASTER_IPA 0 &system_noc SLAVE_OCIMEM 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_IPA_CFG 0>; + interconnect-names = "memory", "imem", "config"; + + qcom,smem-states = <&ipa_smp2p_out 0>, + <&ipa_smp2p_out 1>; + qcom,smem-state-names = "ipa-clock-enabled-valid", + "ipa-clock-enabled"; + + status = "disabled"; + }; + tcsr_mutex: hwlock@1f40000 { compatible = "qcom,tcsr-mutex"; reg = <0x0 0x01f40000 0x0 0x40000>; @@ -1119,49 +1316,26 @@ resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; }; - usb_1_qmpphy: phy@88e9000 { - compatible = "qcom,sc7180-qmp-usb3-dp-phy"; - reg = <0 0x088e9000 0 0x200>, - <0 0x088e8000 0 0x40>, - <0 0x088ea000 0 0x200>; - status = "disabled"; - #address-cells = <2>; - #size-cells = <2>; - ranges; + usb_1_qmpphy: phy@88e8000 { + compatible = "qcom,sm6350-qmp-usb3-dp-phy"; + reg = <0 0x088e8000 0 0x3000>; clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, - <&xo_board>, - <&rpmhcc RPMH_QLINK_CLK>, - <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; - clock-names = "aux", "cfg_ahb", "ref", "com_aux"; + <&gcc GCC_USB3_PRIM_CLKREF_CLK>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "aux", "ref", "com_aux", "usb3_pipe"; + + power-domains = <&gcc USB30_PRIM_GDSC>; - resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, - <&gcc GCC_USB3_PHY_PRIM_BCR>; + resets = <&gcc GCC_USB3_PHY_PRIM_BCR>, + <&gcc GCC_USB3_DP_PHY_PRIM_BCR>; reset-names = "phy", "common"; - usb_1_ssphy: usb3-phy@88e9200 { - reg = <0 0x088e9200 0 0x200>, - <0 0x088e9400 0 0x200>, - <0 0x088e9c00 0 0x400>, - <0 0x088e9600 0 0x200>, - <0 0x088e9800 0 0x200>, - <0 0x088e9a00 0 0x100>; - #clock-cells = <0>; - #phy-cells = <0>; - clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3_phy_pipe_clk_src"; - }; + #clock-cells = <1>; + #phy-cells = <1>; - dp_phy: dp-phy@88ea200 { - reg = <0 0x088ea200 0 0x200>, - <0 0x088ea400 0 0x200>, - <0 0x088eaa00 0 0x200>, - <0 0x088ea600 0 0x200>, - <0 0x088ea800 0 0x200>; - #phy-cells = <0>; - #clock-cells = <1>; - }; + status = "disabled"; }; dc_noc: interconnect@9160000 { @@ -1235,11 +1409,109 @@ snps,dis_enblslpm_quirk; snps,has-lpm-erratum; snps,hird-threshold = /bits/ 8 <0x10>; - phys = <&usb_1_hsphy>, <&usb_1_ssphy>; + phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>; phy-names = "usb2-phy", "usb3-phy"; }; }; + cci0: cci@ac4a000 { + compatible = "qcom,sm6350-cci", "qcom,msm8996-cci"; + reg = <0 0x0ac4a000 0 0x1000>; + interrupts = <GIC_SPI 468 IRQ_TYPE_EDGE_RISING>; + power-domains = <&camcc TITAN_TOP_GDSC>; + + clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>, + <&camcc CAMCC_SOC_AHB_CLK>, + <&camcc CAMCC_SLOW_AHB_CLK_SRC>, + <&camcc CAMCC_CPAS_AHB_CLK>, + <&camcc CAMCC_CCI_0_CLK>, + <&camcc CAMCC_CCI_0_CLK_SRC>; + clock-names = "camnoc_axi", + "soc_ahb", + "slow_ahb_src", + "cpas_ahb", + "cci", + "cci_src"; + + assigned-clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>, + <&camcc CAMCC_CCI_0_CLK>; + assigned-clock-rates = <80000000>, <37500000>; + + pinctrl-0 = <&cci0_default &cci1_default>; + pinctrl-1 = <&cci0_sleep &cci1_sleep>; + pinctrl-names = "default", "sleep"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + cci0_i2c0: i2c-bus@0 { + reg = <0>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + cci0_i2c1: i2c-bus@1 { + reg = <1>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + cci1: cci@ac4b000 { + compatible = "qcom,sm6350-cci", "qcom,msm8996-cci"; + reg = <0 0x0ac4b000 0 0x1000>; + interrupts = <GIC_SPI 462 IRQ_TYPE_EDGE_RISING>; + power-domains = <&camcc TITAN_TOP_GDSC>; + + clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>, + <&camcc CAMCC_SOC_AHB_CLK>, + <&camcc CAMCC_SLOW_AHB_CLK_SRC>, + <&camcc CAMCC_CPAS_AHB_CLK>, + <&camcc CAMCC_CCI_1_CLK>, + <&camcc CAMCC_CCI_1_CLK_SRC>; + clock-names = "camnoc_axi", + "soc_ahb", + "slow_ahb_src", + "cpas_ahb", + "cci", + "cci_src"; + + assigned-clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>, + <&camcc CAMCC_CCI_1_CLK>; + assigned-clock-rates = <80000000>, <37500000>; + + pinctrl-0 = <&cci2_default>; + pinctrl-1 = <&cci2_sleep>; + pinctrl-names = "default", "sleep"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + cci1_i2c0: i2c-bus@0 { + reg = <0>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + /* SM6350 seems to have cci1_i2c1 on gpio2 & gpio3 but unused downstream */ + }; + + camcc: clock-controller@ad00000 { + compatible = "qcom,sm6350-camcc"; + reg = <0 0x0ad00000 0 0x16000>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + pdc: interrupt-controller@b220000 { compatible = "qcom,sm6350-pdc", "qcom,pdc"; reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x64>; @@ -1272,7 +1544,7 @@ #thermal-sensor-cells = <1>; }; - aoss_qmp: power-controller@c300000 { + aoss_qmp: power-management@c300000 { compatible = "qcom,sm6350-aoss-qmp", "qcom,aoss-qmp"; reg = <0 0x0c300000 0 0x1000>; interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP @@ -1284,11 +1556,11 @@ spmi_bus: spmi@c440000 { compatible = "qcom,spmi-pmic-arb"; - reg = <0 0xc440000 0 0x1100>, - <0 0xc600000 0 0x2000000>, - <0 0xe600000 0 0x100000>, - <0 0xe700000 0 0xa0000>, - <0 0xc40a000 0 0x26000>; + reg = <0 0x0c440000 0 0x1100>, + <0 0x0c600000 0 0x2000000>, + <0 0x0e600000 0 0x100000>, + <0 0x0e700000 0 0xa0000>, + <0 0x0c40a000 0 0x26000>; reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; interrupt-names = "periph_irq"; interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; @@ -1318,6 +1590,48 @@ #interrupt-cells = <2>; gpio-ranges = <&tlmm 0 0 157>; + cci0_default: cci0-default-state { + pins = "gpio39", "gpio40"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-up; + }; + + cci0_sleep: cci0-sleep-state { + pins = "gpio39", "gpio40"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-down; + }; + + cci1_default: cci1-default-state { + pins = "gpio41", "gpio42"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-up; + }; + + cci1_sleep: cci1-sleep-state { + pins = "gpio41", "gpio42"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-down; + }; + + cci2_default: cci2-default-state { + pins = "gpio43", "gpio44"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-up; + }; + + cci2_sleep: cci2-sleep-state { + pins = "gpio43", "gpio44"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-down; + }; + sdc2_off_state: sdc2-off-state { clk-pins { pins = "sdc2_clk"; @@ -1670,6 +1984,16 @@ }; }; + osm_l3: interconnect@18321000 { + compatible = "qcom,sm6350-osm-l3", "qcom,osm-l3"; + reg = <0x0 0x18321000 0x0 0x1000>; + + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; + clock-names = "xo", "alternate"; + + #interconnect-cells = <1>; + }; + cpufreq_hw: cpufreq@18323000 { compatible = "qcom,cpufreq-hw"; reg = <0 0x18323000 0 0x1000>, <0 0x18325800 0 0x1000>; diff --git a/arch/arm64/boot/dts/qcom/sm6375.dtsi b/arch/arm64/boot/dts/qcom/sm6375.dtsi index 12cf5dbe5bd6..31b88c738510 100644 --- a/arch/arm64/boot/dts/qcom/sm6375.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6375.dtsi @@ -264,55 +264,55 @@ compatible = "arm,psci-1.0"; method = "smc"; - CPU_PD0: cpu0 { + CPU_PD0: power-domain-cpu0 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&LITTLE_CPU_SLEEP_0>; }; - CPU_PD1: cpu1 { + CPU_PD1: power-domain-cpu1 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&LITTLE_CPU_SLEEP_0>; }; - CPU_PD2: cpu2 { + CPU_PD2: power-domain-cpu2 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&LITTLE_CPU_SLEEP_0>; }; - CPU_PD3: cpu3 { + CPU_PD3: power-domain-cpu3 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&LITTLE_CPU_SLEEP_0>; }; - CPU_PD4: cpu4 { + CPU_PD4: power-domain-cpu4 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&LITTLE_CPU_SLEEP_0>; }; - CPU_PD5: cpu5 { + CPU_PD5: power-domain-cpu5 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&LITTLE_CPU_SLEEP_0>; }; - CPU_PD6: cpu6 { + CPU_PD6: power-domain-cpu6 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&BIG_CPU_SLEEP_0>; }; - CPU_PD7: cpu7 { + CPU_PD7: power-domain-cpu7 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&BIG_CPU_SLEEP_0>; }; - CLUSTER_PD: cpu-cluster0 { + CLUSTER_PD: power-domain-cpu-cluster0 { #power-domain-cells = <0>; domain-idle-states = <&CLUSTER_SLEEP_0>; }; diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts index c456e9594ea5..7ae6aba5d2ec 100644 --- a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts +++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts @@ -5,14 +5,20 @@ /dts-v1/; +/* PMK8350 (in reality a PMK8003) is configured to use SID6 instead of 0 */ +#define PMK8350_SID 6 + #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "sm7225.dtsi" #include "pm6150l.dtsi" #include "pm6350.dtsi" #include "pm7250b.dtsi" +#include "pmk8350.dtsi" / { model = "Fairphone 4"; @@ -104,12 +110,12 @@ }; &adsp { - status = "okay"; firmware-name = "qcom/sm7225/fairphone4/adsp.mdt"; + status = "okay"; }; &apps_rsc { - pm6350-rpmh-regulators { + regulators-0 { compatible = "qcom,pm6350-rpmh-regulators"; qcom,pmic-id = "a"; @@ -238,7 +244,7 @@ }; }; - pm6150l-rpmh-regulators { + regulators-1 { compatible = "qcom,pm6150l-rpmh-regulators"; qcom,pmic-id = "e"; @@ -328,14 +334,63 @@ }; }; -&cdsp { +&cci0 { + status = "okay"; +}; + +&cci0_i2c0 { + /* IMX582 @ 0x1a */ +}; + +&cci0_i2c1 { + /* IMX582 @ 0x1a */ +}; + +&cci1 { status = "okay"; +}; + +&cci1_i2c0 { + /* IMX576 @ 0x10 */ +}; + +&cdsp { firmware-name = "qcom/sm7225/fairphone4/cdsp.mdt"; + status = "okay"; }; -&i2c10 { +&gpi_dma0 { + status = "okay"; +}; + +&gpi_dma1 { status = "okay"; +}; + +&i2c0 { clock-frequency = <400000>; + status = "okay"; + + /* ST21NFCD NFC @ 8 */ + /* VL53L3 ToF @ 29 */ + /* AW88264A amplifier @ 34 */ + /* AW88264A amplifier @ 35 */ +}; + +&i2c8 { + clock-frequency = <400000>; + status = "okay"; + + /* HX83112A touchscreen @ 48 */ +}; + +&i2c10 { + clock-frequency = <400000>; + status = "okay"; + + /* PM8008 PMIC @ 8 and 9 */ + /* PX8618 @ 26 */ + /* SMB1395 PMIC @ 34 */ haptics@5a { compatible = "awinic,aw8695"; @@ -362,17 +417,46 @@ }; }; -&mpss { +&ipa { + qcom,gsi-loader = "self"; + memory-region = <&pil_ipa_fw_mem>; + firmware-name = "qcom/sm7225/fairphone4/ipa_fws.mdt"; status = "okay"; +}; + +&mpss { firmware-name = "qcom/sm7225/fairphone4/modem.mdt"; + status = "okay"; }; -&pm6150l_wled { +&pm6150l_flash { status = "okay"; + led-0 { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_YELLOW>; + led-sources = <1>; + led-max-microamp = <180000>; + flash-max-microamp = <1000000>; + flash-max-timeout-us = <1280000>; + }; + + led-1 { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + led-sources = <2>; + led-max-microamp = <180000>; + flash-max-microamp = <1000000>; + flash-max-timeout-us = <1280000>; + }; +}; + +&pm6150l_wled { qcom,switching-freq = <800>; qcom,current-limit-microamp = <20000>; qcom,num-strings = <2>; + + status = "okay"; }; &pm6350_gpios { @@ -386,8 +470,8 @@ }; &pm6350_resin { - status = "okay"; linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; }; &pm7250b_adc { @@ -426,6 +510,24 @@ }; }; +&pmk8350_rtc { + status = "okay"; +}; + +&pmk8350_vadc { + adc-chan@644 { + reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "xo_therm"; + }; +}; + +&qupv3_id_0 { + status = "okay"; +}; + &qupv3_id_1 { status = "okay"; }; @@ -466,21 +568,21 @@ }; &ufs_mem_hc { - status = "okay"; - reset-gpios = <&tlmm 156 GPIO_ACTIVE_LOW>; vcc-supply = <&vreg_l7e>; vcc-max-microamp = <800000>; vccq2-supply = <&vreg_l12a>; vccq2-max-microamp = <800000>; -}; -&ufs_mem_phy { status = "okay"; +}; +&ufs_mem_phy { vdda-phy-supply = <&vreg_l18a>; vdda-pll-supply = <&vreg_l22a>; + + status = "okay"; }; &usb_1 { @@ -493,26 +595,26 @@ }; &usb_1_hsphy { - status = "okay"; - vdd-supply = <&vreg_l18a>; vdda-pll-supply = <&vreg_l2a>; vdda-phy-dpdm-supply = <&vreg_l3a>; -}; -&usb_1_qmpphy { status = "okay"; +}; +&usb_1_qmpphy { vdda-phy-supply = <&vreg_l22a>; vdda-pll-supply = <&vreg_l16a>; -}; -&wifi { status = "okay"; +}; +&wifi { vdd-0.8-cx-mx-supply = <&vreg_l4a>; vdd-1.8-xo-supply = <&vreg_l7a>; vdd-1.3-rfa-supply = <&vreg_l2e>; vdd-3.3-ch0-supply = <&vreg_l10e>; vdd-3.3-ch1-supply = <&vreg_l11e>; + + status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sm7225.dtsi b/arch/arm64/boot/dts/qcom/sm7225.dtsi index 7b2a002ca7ff..b7b4044e9bb0 100644 --- a/arch/arm64/boot/dts/qcom/sm7225.dtsi +++ b/arch/arm64/boot/dts/qcom/sm7225.dtsi @@ -14,3 +14,22 @@ &CPU5 { compatible = "qcom,kryo570"; }; &CPU6 { compatible = "qcom,kryo570"; }; &CPU7 { compatible = "qcom,kryo570"; }; + +&cpu0_opp_table { + opp-1804800000 { + opp-hz = /bits/ 64 <1804800000>; + opp-peak-kBps = <(1804000 * 4 * 2 * 2) (1459200 * 16 * 2)>; + }; +}; + +&cpu6_opp_table { + opp-2131200000 { + opp-hz = /bits/ 64 <2131200000>; + opp-peak-kBps = <(2092000 * 4 * 2 * 2) (1459200 * 16 * 2)>; + }; + + opp-2208000000 { + opp-hz = /bits/ 64 <2208000000>; + opp-peak-kBps = <(2092000 * 4 * 2 * 2) (1459200 * 16 * 2)>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts index 3331ee957d64..8f014a232526 100644 --- a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts @@ -56,7 +56,7 @@ }; &apps_rsc { - pm8150-rpmh-regulators { + regulators-0 { compatible = "qcom,pm8150-rpmh-regulators"; qcom,pmic-id = "a"; @@ -211,7 +211,7 @@ }; }; - pm8150l-rpmh-regulators { + regulators-1 { compatible = "qcom,pm8150l-rpmh-regulators"; qcom,pmic-id = "c"; @@ -324,7 +324,7 @@ }; }; - pm8009-rpmh-regulators { + regulators-2 { compatible = "qcom,pm8009-rpmh-regulators"; qcom,pmic-id = "f"; diff --git a/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts b/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts index 5397fba9417b..69024f7c7f10 100644 --- a/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts +++ b/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts @@ -61,7 +61,7 @@ }; &apps_rsc { - pm8150-rpmh-regulators { + regulators-0 { compatible = "qcom,pm8150-rpmh-regulators"; qcom,pmic-id = "a"; @@ -216,7 +216,7 @@ }; }; - pm8150l-rpmh-regulators { + regulators-1 { compatible = "qcom,pm8150l-rpmh-regulators"; qcom,pmic-id = "c"; @@ -329,7 +329,7 @@ }; }; - pm8009-rpmh-regulators { + regulators-2 { compatible = "qcom,pm8009-rpmh-regulators"; qcom,pmic-id = "f"; diff --git a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts index 46b5cf9a1192..eff995a07ab7 100644 --- a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts @@ -51,7 +51,7 @@ }; &apps_rsc { - pm8150-rpmh-regulators { + regulators-0 { compatible = "qcom,pm8150-rpmh-regulators"; qcom,pmic-id = "a"; @@ -206,7 +206,7 @@ }; }; - pm8150l-rpmh-regulators { + regulators-1 { compatible = "qcom,pm8150l-rpmh-regulators"; qcom,pmic-id = "c"; @@ -319,7 +319,7 @@ }; }; - pm8009-rpmh-regulators { + regulators-2 { compatible = "qcom,pm8009-rpmh-regulators"; qcom,pmic-id = "f"; diff --git a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi index c958a8b16730..ff77cc3c879a 100644 --- a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi @@ -33,9 +33,10 @@ framebuffer: framebuffer@9c000000 { compatible = "simple-framebuffer"; reg = <0 0x9c000000 0 0x2300000>; - width = <1644>; - height = <3840>; - stride = <(1644 * 4)>; + /* Griffin BL initializes in 2.5k mode, not 4k */ + width = <1096>; + height = <2560>; + stride = <(1096 * 4)>; format = "a8r8g8b8"; /* * That's (going to be) a lot of clocks, but it's necessary due @@ -46,6 +47,40 @@ }; }; + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&focus_n &snapshot_n &vol_down_n>; + + key-camera-focus { + label = "Camera Focus"; + linux,code = <KEY_CAMERA_FOCUS>; + gpios = <&pm8150b_gpios 2 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + gpio-key,wakeup; + }; + + key-camera-snapshot { + label = "Camera Snapshot"; + linux,code = <KEY_CAMERA>; + gpios = <&pm8150b_gpios 1 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + gpio-key,wakeup; + }; + + key-vol-down { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + gpios = <&pm8150_gpios 1 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + gpio-key,wakeup; + }; + }; + vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; regulator-name = "vph_pwr"; @@ -138,7 +173,7 @@ }; &apps_rsc { - pm8150-rpmh-regulators { + regulators-0 { compatible = "qcom,pm8150-rpmh-regulators"; qcom,pmic-id = "a"; @@ -271,7 +306,7 @@ }; }; - pm8150l-rpmh-regulators { + regulators-1 { compatible = "qcom,pm8150l-rpmh-regulators"; qcom,pmic-id = "c"; @@ -394,8 +429,18 @@ /* Qcom SMB1355 @ c */ /* Qcom SMB1390 @ 10 */ - /* NXP PN553 NFC @ 28 */ /* Qcom FSA4480 USB-C audio switch @ 43 */ + + nfc@28 { + compatible = "nxp,nxp-nci-i2c"; + reg = <0x28>; + + interrupt-parent = <&tlmm>; + interrupts = <47 IRQ_TYPE_EDGE_RISING>; + + enable-gpios = <&tlmm 41 GPIO_ACTIVE_HIGH>; + firmware-gpios = <&tlmm 48 GPIO_ACTIVE_HIGH>; + }; }; &i2c7 { @@ -410,10 +455,43 @@ /* Samsung touchscreen @ 48 */ }; +&pm8150_gpios { + vol_down_n: vol-down-n-state { + pins = "gpio1"; + function = "normal"; + power-source = <0>; + bias-pull-up; + input-enable; + }; +}; + +&pm8150b_gpios { + snapshot_n: snapshot-n-state { + pins = "gpio1"; + function = "normal"; + power-source = <0>; + bias-pull-up; + input-enable; + }; + + focus_n: focus-n-state { + pins = "gpio2"; + function = "normal"; + power-source = <0>; + bias-pull-up; + input-enable; + }; +}; + &pon_pwrkey { status = "okay"; }; +&pon_resin { + linux,code = <KEY_VOLUMEUP>; + status = "okay"; +}; + &qupv3_id_0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index a0c57fb798d3..fd20096cfc6e 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -9,6 +9,7 @@ #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> #include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/clock/qcom,dispcc-sm8150.h> #include <dt-bindings/clock/qcom,gcc-sm8150.h> #include <dt-bindings/clock/qcom,gpucc-sm8150.h> #include <dt-bindings/interconnect/qcom,osm-l3.h> @@ -60,9 +61,11 @@ #cooling-cells = <2>; L2_0: l2-cache { compatible = "cache"; + cache-level = <2>; next-level-cache = <&L3_0>; L3_0: l3-cache { compatible = "cache"; + cache-level = <3>; }; }; }; @@ -84,6 +87,7 @@ #cooling-cells = <2>; L2_100: l2-cache { compatible = "cache"; + cache-level = <2>; next-level-cache = <&L3_0>; }; @@ -106,6 +110,7 @@ #cooling-cells = <2>; L2_200: l2-cache { compatible = "cache"; + cache-level = <2>; next-level-cache = <&L3_0>; }; }; @@ -127,6 +132,7 @@ #cooling-cells = <2>; L2_300: l2-cache { compatible = "cache"; + cache-level = <2>; next-level-cache = <&L3_0>; }; }; @@ -148,6 +154,7 @@ #cooling-cells = <2>; L2_400: l2-cache { compatible = "cache"; + cache-level = <2>; next-level-cache = <&L3_0>; }; }; @@ -169,6 +176,7 @@ #cooling-cells = <2>; L2_500: l2-cache { compatible = "cache"; + cache-level = <2>; next-level-cache = <&L3_0>; }; }; @@ -190,6 +198,7 @@ #cooling-cells = <2>; L2_600: l2-cache { compatible = "cache"; + cache-level = <2>; next-level-cache = <&L3_0>; }; }; @@ -211,6 +220,7 @@ #cooling-cells = <2>; L2_700: l2-cache { compatible = "cache"; + cache-level = <2>; next-level-cache = <&L3_0>; }; }; @@ -600,55 +610,55 @@ compatible = "arm,psci-1.0"; method = "smc"; - CPU_PD0: cpu0 { + CPU_PD0: power-domain-cpu0 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&LITTLE_CPU_SLEEP_0>; }; - CPU_PD1: cpu1 { + CPU_PD1: power-domain-cpu1 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&LITTLE_CPU_SLEEP_0>; }; - CPU_PD2: cpu2 { + CPU_PD2: power-domain-cpu2 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&LITTLE_CPU_SLEEP_0>; }; - CPU_PD3: cpu3 { + CPU_PD3: power-domain-cpu3 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&LITTLE_CPU_SLEEP_0>; }; - CPU_PD4: cpu4 { + CPU_PD4: power-domain-cpu4 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&BIG_CPU_SLEEP_0>; }; - CPU_PD5: cpu5 { + CPU_PD5: power-domain-cpu5 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&BIG_CPU_SLEEP_0>; }; - CPU_PD6: cpu6 { + CPU_PD6: power-domain-cpu6 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&BIG_CPU_SLEEP_0>; }; - CPU_PD7: cpu7 { + CPU_PD7: power-domain-cpu7 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&BIG_CPU_SLEEP_0>; }; - CLUSTER_PD: cpu-cluster0 { + CLUSTER_PD: power-domain-cpu-cluster0 { #power-domain-cells = <0>; domain-idle-states = <&CLUSTER_SLEEP_0>; }; @@ -888,7 +898,7 @@ gpi_dma0: dma-controller@800000 { compatible = "qcom,sm8150-gpi-dma", "qcom,sdm845-gpi-dma"; - reg = <0 0x800000 0 0x60000>; + reg = <0 0x00800000 0 0x60000>; interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>, @@ -926,7 +936,7 @@ power-domains = <&gcc EMAC_GDSC>; resets = <&gcc GCC_EMAC_BCR>; - iommus = <&apps_smmu 0x3C0 0x0>; + iommus = <&apps_smmu 0x3c0 0x0>; snps,tso; rx-fifo-depth = <4096>; @@ -966,7 +976,7 @@ spi0: spi@880000 { compatible = "qcom,geni-spi"; - reg = <0 0x880000 0 0x4000>; + reg = <0 0x00880000 0 0x4000>; reg-names = "se"; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; @@ -1000,7 +1010,7 @@ spi1: spi@884000 { compatible = "qcom,geni-spi"; - reg = <0 0x884000 0 0x4000>; + reg = <0 0x00884000 0 0x4000>; reg-names = "se"; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; @@ -1034,7 +1044,7 @@ spi2: spi@888000 { compatible = "qcom,geni-spi"; - reg = <0 0x888000 0 0x4000>; + reg = <0 0x00888000 0 0x4000>; reg-names = "se"; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; @@ -1068,7 +1078,7 @@ spi3: spi@88c000 { compatible = "qcom,geni-spi"; - reg = <0 0x88c000 0 0x4000>; + reg = <0 0x0088c000 0 0x4000>; reg-names = "se"; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; @@ -1102,7 +1112,7 @@ spi4: spi@890000 { compatible = "qcom,geni-spi"; - reg = <0 0x890000 0 0x4000>; + reg = <0 0x00890000 0 0x4000>; reg-names = "se"; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; @@ -1136,7 +1146,7 @@ spi5: spi@894000 { compatible = "qcom,geni-spi"; - reg = <0 0x894000 0 0x4000>; + reg = <0 0x00894000 0 0x4000>; reg-names = "se"; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; @@ -1170,7 +1180,7 @@ spi6: spi@898000 { compatible = "qcom,geni-spi"; - reg = <0 0x898000 0 0x4000>; + reg = <0 0x00898000 0 0x4000>; reg-names = "se"; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; @@ -1204,7 +1214,7 @@ spi7: spi@89c000 { compatible = "qcom,geni-spi"; - reg = <0 0x89c000 0 0x4000>; + reg = <0 0x0089c000 0 0x4000>; reg-names = "se"; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; @@ -1223,7 +1233,7 @@ gpi_dma1: dma-controller@a00000 { compatible = "qcom,sm8150-gpi-dma", "qcom,sdm845-gpi-dma"; - reg = <0 0xa00000 0 0x60000>; + reg = <0 0x00a00000 0 0x60000>; interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>, @@ -1274,7 +1284,7 @@ spi8: spi@a80000 { compatible = "qcom,geni-spi"; - reg = <0 0xa80000 0 0x4000>; + reg = <0 0x00a80000 0 0x4000>; reg-names = "se"; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; @@ -1308,7 +1318,7 @@ spi9: spi@a84000 { compatible = "qcom,geni-spi"; - reg = <0 0xa84000 0 0x4000>; + reg = <0 0x00a84000 0 0x4000>; reg-names = "se"; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; @@ -1342,7 +1352,7 @@ spi10: spi@a88000 { compatible = "qcom,geni-spi"; - reg = <0 0xa88000 0 0x4000>; + reg = <0 0x00a88000 0 0x4000>; reg-names = "se"; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; @@ -1376,7 +1386,7 @@ spi11: spi@a8c000 { compatible = "qcom,geni-spi"; - reg = <0 0xa8c000 0 0x4000>; + reg = <0 0x00a8c000 0 0x4000>; reg-names = "se"; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; @@ -1419,7 +1429,7 @@ spi12: spi@a90000 { compatible = "qcom,geni-spi"; - reg = <0 0xa90000 0 0x4000>; + reg = <0 0x00a90000 0 0x4000>; reg-names = "se"; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; @@ -1437,7 +1447,7 @@ i2c16: i2c@94000 { compatible = "qcom,geni-i2c"; - reg = <0 0x0094000 0 0x4000>; + reg = <0 0x00094000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>, @@ -1453,7 +1463,7 @@ spi16: spi@a94000 { compatible = "qcom,geni-spi"; - reg = <0 0xa94000 0 0x4000>; + reg = <0 0x00a94000 0 0x4000>; reg-names = "se"; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; @@ -1472,7 +1482,7 @@ gpi_dma2: dma-controller@c00000 { compatible = "qcom,sm8150-gpi-dma", "qcom,sdm845-gpi-dma"; - reg = <0 0xc00000 0 0x60000>; + reg = <0 0x00c00000 0 0x60000>; interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>, @@ -1524,7 +1534,7 @@ spi17: spi@c80000 { compatible = "qcom,geni-spi"; - reg = <0 0xc80000 0 0x4000>; + reg = <0 0x00c80000 0 0x4000>; reg-names = "se"; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; @@ -1558,7 +1568,7 @@ spi18: spi@c84000 { compatible = "qcom,geni-spi"; - reg = <0 0xc84000 0 0x4000>; + reg = <0 0x00c84000 0 0x4000>; reg-names = "se"; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; @@ -1592,7 +1602,7 @@ spi19: spi@c88000 { compatible = "qcom,geni-spi"; - reg = <0 0xc88000 0 0x4000>; + reg = <0 0x00c88000 0 0x4000>; reg-names = "se"; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; @@ -1626,7 +1636,7 @@ spi13: spi@c8c000 { compatible = "qcom,geni-spi"; - reg = <0 0xc8c000 0 0x4000>; + reg = <0 0x00c8c000 0 0x4000>; reg-names = "se"; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; @@ -1660,7 +1670,7 @@ spi14: spi@c90000 { compatible = "qcom,geni-spi"; - reg = <0 0xc90000 0 0x4000>; + reg = <0 0x00c90000 0 0x4000>; reg-names = "se"; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; @@ -1694,7 +1704,7 @@ spi15: spi@c94000 { compatible = "qcom,geni-spi"; - reg = <0 0xc94000 0 0x4000>; + reg = <0 0x00c94000 0 0x4000>; reg-names = "se"; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; @@ -1767,6 +1777,12 @@ interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>; }; + dma@10a2000 { + compatible = "qcom,sm8150-dcc", "qcom,dcc"; + reg = <0x0 0x010a2000 0x0 0x1000>, + <0x0 0x010ad000 0x0 0x3000>; + }; + pcie0: pci@1c00000 { compatible = "qcom,pcie-sm8150", "snps,dw-pcie"; reg = <0 0x01c00000 0 0x3000>, @@ -1851,10 +1867,10 @@ status = "disabled"; pcie0_lane: phy@1c06200 { - reg = <0 0x1c06200 0 0x170>, /* tx */ - <0 0x1c06400 0 0x200>, /* rx */ - <0 0x1c06800 0 0x1f0>, /* pcs */ - <0 0x1c06c00 0 0xf4>; /* "pcs_lane" same as pcs_misc? */ + reg = <0 0x01c06200 0 0x170>, /* tx */ + <0 0x01c06400 0 0x200>, /* rx */ + <0 0x01c06800 0 0x1f0>, /* pcs */ + <0 0x01c06c00 0 0xf4>; /* "pcs_lane" same as pcs_misc? */ clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; clock-names = "pipe0"; @@ -1950,12 +1966,12 @@ status = "disabled"; pcie1_lane: phy@1c0e200 { - reg = <0 0x1c0e200 0 0x170>, /* tx0 */ - <0 0x1c0e400 0 0x200>, /* rx0 */ - <0 0x1c0ea00 0 0x1f0>, /* pcs */ - <0 0x1c0e600 0 0x170>, /* tx1 */ - <0 0x1c0e800 0 0x200>, /* rx1 */ - <0 0x1c0ee00 0 0xf4>; /* "pcs_com" same as pcs_misc? */ + reg = <0 0x01c0e200 0 0x170>, /* tx0 */ + <0 0x01c0e400 0 0x200>, /* rx0 */ + <0 0x01c0ea00 0 0x1f0>, /* pcs */ + <0 0x01c0e600 0 0x170>, /* tx1 */ + <0 0x01c0e800 0 0x200>, /* rx1 */ + <0 0x01c0ee00 0 0xf4>; /* "pcs_com" same as pcs_misc? */ clocks = <&gcc GCC_PCIE_1_PIPE_CLK>; clock-names = "pipe0"; @@ -2041,13 +2057,6 @@ }; }; - ipa_virt: interconnect@1e00000 { - compatible = "qcom,sm8150-ipa-virt"; - reg = <0 0x01e00000 0 0x1000>; - #interconnect-cells = <1>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - tcsr_mutex: hwlock@1f40000 { compatible = "qcom,tcsr-mutex"; reg = <0x0 0x01f40000 0x0 0x20000>; @@ -2240,7 +2249,7 @@ }; adreno_smmu: iommu@2ca0000 { - compatible = "qcom,sm8150-smmu-500", "arm,mmu-500"; + compatible = "qcom,sm8150-smmu-500", "qcom,adreno-smmu", "arm,mmu-500"; reg = <0 0x02ca0000 0 0x10000>; #iommu-cells = <2>; #global-interrupts = <1>; @@ -3579,6 +3588,291 @@ qcom,bcm-voters = <&apps_bcm_voter>; }; + mdss: display-subsystem@ae00000 { + compatible = "qcom,sm8150-mdss"; + reg = <0 0x0ae00000 0 0x1000>; + reg-names = "mdss"; + + interconnects = <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>, + <&mmss_noc MASTER_MDP_PORT1 &mc_virt SLAVE_EBI_CH0>; + interconnect-names = "mdp0-mem", "mdp1-mem"; + + power-domains = <&dispcc MDSS_GDSC>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", "bus", "nrt_bus", "core"; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + iommus = <&apps_smmu 0x800 0x420>; + + status = "disabled"; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + mdss_mdp: display-controller@ae01000 { + compatible = "qcom,sm8150-dpu"; + reg = <0 0x0ae01000 0 0x8f000>, + <0 0x0aeb0000 0 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "iface", "bus", "core", "vsync"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd SM8150_MMCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf2_out: endpoint { + remote-endpoint = <&mdss_dsi1_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-171428571 { + opp-hz = /bits/ 64 <171428571>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-345000000 { + opp-hz = /bits/ 64 <345000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-460000000 { + opp-hz = /bits/ 64 <460000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss_dsi0: dsi@ae94000 { + compatible = "qcom,sm8150-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0 0x0ae94000 0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SM8150_MMCX>; + + phys = <&mdss_dsi0_phy>; + + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi0_out: endpoint { + }; + }; + }; + + dsi_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + mdss_dsi0_phy: phy@ae94400 { + compatible = "qcom,dsi-phy-7nm"; + reg = <0 0x0ae94400 0 0x200>, + <0 0x0ae94600 0 0x280>, + <0 0x0ae94900 0 0x260>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + + status = "disabled"; + }; + + mdss_dsi1: dsi@ae96000 { + compatible = "qcom,sm8150-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0 0x0ae96000 0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <5>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>, + <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK>, + <&dispcc DISP_CC_MDSS_ESC1_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi1_phy 0>, + <&mdss_dsi1_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SM8150_MMCX>; + + phys = <&mdss_dsi1_phy>; + + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi1_in: endpoint { + remote-endpoint = <&dpu_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi1_out: endpoint { + }; + }; + }; + }; + + mdss_dsi1_phy: phy@ae96400 { + compatible = "qcom,dsi-phy-7nm"; + reg = <0 0x0ae96400 0 0x200>, + <0 0x0ae96600 0 0x280>, + <0 0x0ae96900 0 0x260>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + + status = "disabled"; + }; + }; + + dispcc: clock-controller@af00000 { + compatible = "qcom,sm8150-dispcc"; + reg = <0 0x0af00000 0 0x10000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>, + <&mdss_dsi1_phy 0>, + <&mdss_dsi1_phy 1>, + <0>, + <0>; + clock-names = "bi_tcxo", + "dsi0_phy_pll_out_byteclk", + "dsi0_phy_pll_out_dsiclk", + "dsi1_phy_pll_out_byteclk", + "dsi1_phy_pll_out_dsiclk", + "dp_phy_pll_link_clk", + "dp_phy_pll_vco_div_clk"; + power-domains = <&rpmhpd SM8150_MMCX>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + pdc: interrupt-controller@b220000 { compatible = "qcom,sm8150-pdc", "qcom,pdc"; reg = <0 0x0b220000 0 0x400>; @@ -3589,7 +3883,7 @@ interrupt-controller; }; - aoss_qmp: power-controller@c300000 { + aoss_qmp: power-management@c300000 { compatible = "qcom,sm8150-aoss-qmp", "qcom,aoss-qmp"; reg = <0x0 0x0c300000 0x0 0x400>; interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>; @@ -3823,7 +4117,7 @@ reg = <0x0 0x17c20000 0x0 0x1000>; clock-frequency = <19200000>; - frame@17c21000{ + frame@17c21000 { frame-number = <0>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; @@ -4057,7 +4351,7 @@ type = "passive"; }; - cpu0_crit: cpu_crit { + cpu0_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -4101,7 +4395,7 @@ type = "passive"; }; - cpu1_crit: cpu_crit { + cpu1_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -4145,7 +4439,7 @@ type = "passive"; }; - cpu2_crit: cpu_crit { + cpu2_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -4189,7 +4483,7 @@ type = "passive"; }; - cpu3_crit: cpu_crit { + cpu3_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -4233,7 +4527,7 @@ type = "passive"; }; - cpu4_top_crit: cpu_crit { + cpu4_top_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -4277,7 +4571,7 @@ type = "passive"; }; - cpu5_top_crit: cpu_crit { + cpu5_top_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -4321,7 +4615,7 @@ type = "passive"; }; - cpu6_top_crit: cpu_crit { + cpu6_top_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -4365,7 +4659,7 @@ type = "passive"; }; - cpu7_top_crit: cpu_crit { + cpu7_top_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -4409,7 +4703,7 @@ type = "passive"; }; - cpu4_bottom_crit: cpu_crit { + cpu4_bottom_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -4453,7 +4747,7 @@ type = "passive"; }; - cpu5_bottom_crit: cpu_crit { + cpu5_bottom_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -4497,7 +4791,7 @@ type = "passive"; }; - cpu6_bottom_crit: cpu_crit { + cpu6_bottom_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -4541,7 +4835,7 @@ type = "passive"; }; - cpu7_bottom_crit: cpu_crit { + cpu7_bottom_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; diff --git a/arch/arm64/boot/dts/qcom/sm8250-hdk.dts b/arch/arm64/boot/dts/qcom/sm8250-hdk.dts index 632e98193d27..0aee7f8658b4 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8250-hdk.dts @@ -65,7 +65,7 @@ }; &apps_rsc { - pm8150-rpmh-regulators { + regulators-0 { compatible = "qcom,pm8150-rpmh-regulators"; qcom,pmic-id = "a"; @@ -199,7 +199,7 @@ }; }; - pm8150l-rpmh-regulators { + regulators-1 { compatible = "qcom,pm8150l-rpmh-regulators"; qcom,pmic-id = "c"; @@ -310,7 +310,7 @@ }; }; - pm8009-rpmh-regulators { + regulators-2 { compatible = "qcom,pm8009-rpmh-regulators"; qcom,pmic-id = "f"; diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts index 3ed8c84e25b8..e54cdc8bc31f 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts @@ -23,6 +23,29 @@ serial0 = &uart12; }; + wcd938x: audio-codec { + compatible = "qcom,wcd9380-codec"; + + reset-gpios = <&tlmm 32 GPIO_ACTIVE_LOW>; + + vdd-buck-supply = <&vreg_s4a_1p8>; + vdd-rxtx-supply = <&vreg_s4a_1p8>; + vdd-io-supply = <&vreg_s4a_1p8>; + vdd-mic-bias-supply = <&vreg_bob>; + + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + qcom,rx-device = <&wcd_rx>; + qcom,tx-device = <&wcd_tx>; + + #sound-dai-cells = <1>; + }; + chosen { stdout-path = "serial0:115200n8"; }; @@ -164,7 +187,7 @@ }; &apps_rsc { - pm8150-rpmh-regulators { + regulators-0 { compatible = "qcom,pm8150-rpmh-regulators"; qcom,pmic-id = "a"; @@ -298,7 +321,7 @@ }; }; - pm8150l-rpmh-regulators { + regulators-1 { compatible = "qcom,pm8150l-rpmh-regulators"; qcom,pmic-id = "c"; @@ -409,7 +432,7 @@ }; }; - pm8009-rpmh-regulators { + regulators-2 { compatible = "qcom,pm8009-rpmh-regulators"; qcom,pmic-id = "f"; @@ -631,27 +654,6 @@ firmware-name = "qcom/sm8250/slpi.mbn"; }; -&soc { - wcd938x: codec { - compatible = "qcom,wcd9380-codec"; - #sound-dai-cells = <1>; - reset-gpios = <&tlmm 32 GPIO_ACTIVE_LOW>; - vdd-buck-supply = <&vreg_s4a_1p8>; - vdd-rxtx-supply = <&vreg_s4a_1p8>; - vdd-io-supply = <&vreg_s4a_1p8>; - vdd-mic-bias-supply = <&vreg_bob>; - qcom,micbias1-microvolt = <1800000>; - qcom,micbias2-microvolt = <1800000>; - qcom,micbias3-microvolt = <1800000>; - qcom,micbias4-microvolt = <1800000>; - qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; - qcom,mbhc-headset-vthreshold-microvolt = <1700000>; - qcom,mbhc-headphone-vthreshold-microvolt = <50000>; - qcom,rx-device = <&wcd_rx>; - qcom,tx-device = <&wcd_tx>; - }; -}; - &sound { compatible = "qcom,sm8250-sndcard"; model = "SM8250-MTP-WCD9380-WSA8810-VA-DMIC"; @@ -757,6 +759,8 @@ }; &swr0 { + status = "okay"; + left_spkr: speaker@0,3 { compatible = "sdw10217211000"; reg = <0 3>; @@ -890,3 +894,7 @@ &venus { status = "okay"; }; + +&wsamacro { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi index 09a31f707639..b9c982a059df 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi @@ -123,7 +123,7 @@ }; &apps_rsc { - pm8150-rpmh-regulators { + regulators-0 { compatible = "qcom,pm8150-rpmh-regulators"; qcom,pmic-id = "a"; @@ -247,7 +247,7 @@ * ab: 4600000-6100000 * ibb: 800000-5400000 */ - pm8150l-rpmh-regulators { + regulators-1 { compatible = "qcom,pm8150l-rpmh-regulators"; qcom,pmic-id = "c"; @@ -360,7 +360,7 @@ }; }; - pm8009-rpmh-regulators { + regulators-2 { compatible = "qcom,pm8009-rpmh-regulators"; qcom,pmic-id = "f"; @@ -454,7 +454,7 @@ status = "okay"; clock-frequency = <1000000>; - cs35l41_l: cs35l41@40 { + cs35l41_l: speaker-amp@40 { compatible = "cirrus,cs35l41"; reg = <0x40>; interrupt-parent = <&tlmm>; @@ -469,7 +469,7 @@ #sound-dai-cells = <1>; }; - cs35l41_r: cs35l41@41 { + cs35l41_r: speaker-amp@41 { compatible = "cirrus,cs35l41"; reg = <0x41>; interrupt-parent = <&tlmm>; @@ -522,10 +522,8 @@ clock-frequency = <400000>; /* Qcom SMB1390 @ 10 */ - /* Silicon Labs SI4704 FM Radio Receiver @ 11 */ /* Qcom SMB1390_slave @ 18 */ /* HALO HL6111R Qi charger @ 25 */ - /* Richwave RTC6226 FM Radio Receiver @ 64 */ }; &pcie0 { diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish.dts b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish.dts new file mode 100644 index 000000000000..acaa99c5ff8b --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish.dts @@ -0,0 +1,630 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, 2023 Jianhua Lu <lujianhua000@gmail.com> + */ + +/dts-v1/; + +#include <dt-bindings/arm/qcom,ids.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sm8250.dtsi" +#include "pm8150.dtsi" +#include "pm8150b.dtsi" +#include "pm8150l.dtsi" +#include "pm8009.dtsi" + +/* + * Delete following upstream (sm8250.dtsi) reserved + * memory mappings which are different on this device. + */ +/delete-node/ &adsp_mem; +/delete-node/ &cdsp_secure_heap; +/delete-node/ &slpi_mem; +/delete-node/ &spss_mem; +/delete-node/ &xbl_aop_mem; + +/ { + model = "Xiaomi Mi Pad 5 Pro"; + compatible = "xiaomi,elish", "qcom,sm8250"; + classis-type = "tablet"; + + /* required for bootloader to select correct board */ + qcom,msm-id = <QCOM_ID_SM8250 0x20001>; /* SM8250 v2.1 */ + qcom,board-id = <0x10008 0>; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer: framebuffer@9c000000 { + compatible = "simple-framebuffer"; + reg = <0x0 0x9c000000 0x0 0x2300000>; + width = <1600>; + height = <2560>; + stride = <(1600 * 4)>; + format = "a8r8g8b8"; + }; + }; + + battery_l: battery-l { + compatible = "simple-battery"; + voltage-min-design-microvolt = <3870000>; + energy-full-design-microwatt-hours = <16600000>; + charge-full-design-microamp-hours = <4300000>; + }; + + battery_r: battery-r { + compatible = "simple-battery"; + voltage-min-design-microvolt = <3870000>; + energy-full-design-microwatt-hours = <16600000>; + charge-full-design-microamp-hours = <4300000>; + }; + + bl_vddpos_5p5: bl-vddpos-regulator { + compatible = "regulator-fixed"; + regulator-name = "bl_vddpos_5p5"; + regulator-min-microvolt = <5500000>; + regulator-max-microvolt = <5500000>; + regulator-enable-ramp-delay = <233>; + gpio = <&tlmm 130 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + }; + + bl_vddneg_5p5: bl-vddneg-regulator { + compatible = "regulator-fixed"; + regulator-name = "bl_vddneg_5p5"; + regulator-min-microvolt = <5500000>; + regulator-max-microvolt = <5500000>; + regulator-enable-ramp-delay = <233>; + gpio = <&tlmm 131 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + }; + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&vol_up_n>; + + key-vol-up { + label = "Volume Up"; + gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <15>; + linux,can-disable; + gpio-key,wakeup; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + /* S6c is really ebi.lvl but it's there for supply map completeness sake. */ + vreg_s6c_0p88: smpc6-regulator { + compatible = "regulator-fixed"; + regulator-name = "vreg_s6c_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-always-on; + vin-supply = <&vph_pwr>; + }; + + reserved-memory { + xbl_aop_mem: xbl-aop@80700000 { + reg = <0x0 0x80600000 0x0 0x260000>; + no-map; + }; + + slpi_mem: slpi@88c00000 { + reg = <0x0 0x88c00000 0x0 0x2f00000>; + no-map; + }; + + adsp_mem: adsp@8bb00000 { + reg = <0x0 0x8bb00000 0x0 0x2500000>; + no-map; + }; + + spss_mem: spss@8e000000 { + reg = <0x0 0x8e000000 0x0 0x100000>; + no-map; + }; + + cdsp_secure_heap: cdsp-secure-heap@8e100000 { + reg = <0x0 0x8e100000 0x0 0x4600000>; + no-map; + }; + + cont_splash_mem: cont-splash@9c000000 { + reg = <0x0 0x9c000000 0x0 0x2300000>; + no-map; + }; + + ramoops@b0000000 { + compatible = "ramoops"; + reg = <0x0 0xb0000000 0x0 0x400000>; + record-size = <0x1000>; + console-size = <0x200000>; + ecc-size = <16>; + no-map; + }; + }; +}; + +&adsp { + firmware-name = "qcom/sm8250/xiaomi/elish/adsp.mbn"; + status = "okay"; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8150-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-l1-l8-l11-supply = <&vreg_s6c_0p88>; + vdd-l2-l10-supply = <&vreg_bob>; + vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p95>; + vdd-l6-l9-supply = <&vreg_s8c_1p35>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>; + vdd-l13-l16-l17-supply = <&vreg_bob>; + + /* (S1+S2+S3) - cx.lvl (ARC) */ + + vreg_s4a_1p8: smps4 { + regulator-name = "vreg_s4a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5a_1p9: smps5 { + regulator-name = "vreg_s5a_1p9"; + regulator-min-microvolt = <1900000>; + regulator-max-microvolt = <2040000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s6a_0p95: smps6 { + regulator-name = "vreg_s6a_0p95"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1128000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2a_3p1: ldo2 { + regulator-name = "vreg_l2a_3p1"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3a_0p9: ldo3 { + regulator-name = "vreg_l3a_0p9"; + regulator-min-microvolt = <928000>; + regulator-max-microvolt = <932000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* L4 - lmx.lvl (ARC) */ + + vreg_l5a_0p88: ldo5 { + regulator-name = "vreg_l5a_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6a_1p2: ldo6 { + regulator-name = "vreg_l6a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + /* L7 is unused. */ + + vreg_l9a_1p2: ldo9 { + regulator-name = "vreg_l9a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* L10 is unused, L11 - lcx.lvl (ARC) */ + + vreg_l12a_1p8: ldo12 { + regulator-name = "vreg_l12a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* L13 is unused. */ + + vreg_l14a_1p88: ldo14 { + regulator-name = "vreg_l14a_1p88"; + regulator-min-microvolt = <1880000>; + regulator-max-microvolt = <1880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* L15 & L16 are unused. */ + + vreg_l17a_3p0: ldo17 { + regulator-name = "vreg_l17a_3p0"; + regulator-min-microvolt = <2496000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l18a_0p9: ldo18 { + regulator-name = "vreg_l18a_0p9"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + /* + * Remaining regulators that are not yet supported: + * OLEDB: 4925000-8100000 + * ab: 4600000-6100000 + * ibb: 800000-5400000 + */ + regulators-1 { + compatible = "qcom,pm8150l-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-l1-l8-supply = <&vreg_s4a_1p8>; + vdd-l2-l3-supply = <&vreg_s8c_1p35>; + vdd-l4-l5-l6-supply = <&vreg_bob>; + vdd-l7-l11-supply = <&vreg_bob>; + vdd-l9-l10-supply = <&vreg_bob>; + vdd-bob-supply = <&vph_pwr>; + + vreg_bob: bob { + regulator-name = "vreg_bob"; + regulator-min-microvolt = <3350000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + }; + + /* + * S1-S6 are ARCs: + * (S1+S2) - gfx.lvl, + * S3 - mx.lvl, + * (S4+S5) - mmcx.lvl, + * S6 - ebi.lvl + */ + + vreg_s7c_0p35: smps7 { + regulator-name = "vreg_s7c_0p35"; + regulator-min-microvolt = <348000>; + regulator-max-microvolt = <1000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s8c_1p35: smps8 { + regulator-name = "vreg_s8c_1p35"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1400000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1c_1p8: ldo1 { + regulator-name = "vreg_l1c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* L2-4 are unused. */ + + vreg_l5c_1p8: ldo5 { + regulator-name = "vreg_l5c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6c_2p9: ldo6 { + regulator-name = "vreg_l6c_2p9"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7c_2p85: ldo7 { + regulator-name = "vreg_l7c_2p85"; + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8c_1p8: ldo8 { + regulator-name = "vreg_l8c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9c_2p9: ldo9 { + regulator-name = "vreg_l9c_2p9"; + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10c_3p3: ldo10 { + regulator-name = "vreg_l10c_3p3"; + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3296000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11c_3p0: ldo11 { + regulator-name = "vreg_l11c_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-2 { + compatible = "qcom,pm8009-rpmh-regulators"; + qcom,pmic-id = "f"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vreg_bob>; + vdd-l2-supply = <&vreg_s8c_1p35>; + vdd-l5-l6-supply = <&vreg_bob>; + vdd-l7-supply = <&vreg_s4a_1p8>; + + vreg_s1f_1p2: smps1 { + regulator-name = "vreg_s1f_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s2f_0p5: smps2 { + regulator-name = "vreg_s2f_0p5"; + regulator-min-microvolt = <512000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* L1 is unused. */ + + vreg_l2f_1p3: ldo2 { + regulator-name = "vreg_l2f_1p3"; + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* L3 & L4 are unused. */ + + vreg_l5f_2p8: ldo5 { + regulator-name = "vreg_l5f_2p85"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6f_2p8: ldo6 { + regulator-name = "vreg_l6f_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7f_1p8: ldo7 { + regulator-name = "vreg_l7f_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&cdsp { + firmware-name = "qcom/sm8250/xiaomi/elish/cdsp.mbn"; + status = "okay"; +}; + +&gmu { + status = "okay"; +}; + +&gpi_dma0 { + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; +}; + +&gpi_dma2 { + status = "okay"; +}; + +&gpu { + status = "okay"; + + zap-shader { + memory-region = <&gpu_mem>; + firmware-name = "qcom/sm8250/xiaomi/elish/a650_zap.mbn"; + }; +}; + +&i2c0 { + clock-frequency = <400000>; + status = "okay"; + + fuel-gauge@55 { + compatible = "ti,bq27z561"; + reg = <0x55>; + monitored-battery = <&battery_r>; + }; +}; + +&i2c11 { + clock-frequency = <400000>; + status = "okay"; + + backlight: backlight@11 { + compatible = "kinetic,ktz8866"; + reg = <0x11>; + vddpos-supply = <&bl_vddpos_5p5>; + vddneg-supply = <&bl_vddneg_5p5>; + enable-gpios = <&tlmm 139 GPIO_ACTIVE_HIGH>; + current-num-sinks = <5>; + kinetic,current-ramp-delay-ms = <128>; + kinetic,led-enable-ramp-delay-ms = <1>; + kinetic,enable-lcd-bias; + }; +}; + +&i2c13 { + clock-frequency = <400000>; + status = "okay"; + + fuel-gauge@55 { + compatible = "ti,bq27z561"; + reg = <0x55>; + monitored-battery = <&battery_l>; + }; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie0_phy { + vdda-phy-supply = <&vreg_l5a_0p88>; + vdda-pll-supply = <&vreg_l9a_1p2>; + status = "okay"; +}; + +&pm8150_gpios { + vol_up_n: vol-up-n-state { + pins = "gpio6"; + function = "normal"; + power-source = <1>; + input-enable; + bias-pull-up; + }; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&qupv3_id_2 { + status = "okay"; +}; + +&slpi { + firmware-name = "qcom/sm8250/xiaomi/elish/slpi.mbn"; + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <40 4>; +}; + +&usb_1 { + /* USB 2.0 only */ + qcom,select-utmi-as-pipe-clk; + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; + maximum-spped = "high-speed"; + /* Remove USB3 phy */ + phys = <&usb_1_hsphy>; + phy-names = "usb2-phy"; +}; + +&usb_1_hsphy { + vdda-pll-supply = <&vreg_l5a_0p88>; + vdda18-supply = <&vreg_l12a_1p8>; + vdda33-supply = <&vreg_l2a_3p1>; + status = "okay"; +}; + +&ufs_mem_hc { + vcc-supply = <&vreg_l17a_3p0>; + vcc-max-microamp = <800000>; + vccq-supply = <&vreg_l6a_1p2>; + vccq-max-microamp = <800000>; + vccq2-supply = <&vreg_s4a_1p8>; + vccq2-max-microamp = <800000>; + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l5a_0p88>; + vdda-pll-supply = <&vreg_l9a_1p2>; + status = "okay"; +}; + +&venus { + firmware-name = "qcom/sm8250/elish/venus.mbn"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index dab5579946f3..f69fa68a1222 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -110,9 +110,15 @@ #cooling-cells = <2>; L2_0: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-size = <0x20000>; + cache-unified; next-level-cache = <&L3_0>; L3_0: l3-cache { compatible = "cache"; + cache-level = <3>; + cache-size = <0x400000>; + cache-unified; }; }; }; @@ -134,6 +140,9 @@ #cooling-cells = <2>; L2_100: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-size = <0x20000>; + cache-unified; next-level-cache = <&L3_0>; }; }; @@ -155,6 +164,9 @@ #cooling-cells = <2>; L2_200: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-size = <0x20000>; + cache-unified; next-level-cache = <&L3_0>; }; }; @@ -176,6 +188,9 @@ #cooling-cells = <2>; L2_300: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-size = <0x20000>; + cache-unified; next-level-cache = <&L3_0>; }; }; @@ -197,6 +212,9 @@ #cooling-cells = <2>; L2_400: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-size = <0x40000>; + cache-unified; next-level-cache = <&L3_0>; }; }; @@ -218,6 +236,9 @@ #cooling-cells = <2>; L2_500: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-size = <0x40000>; + cache-unified; next-level-cache = <&L3_0>; }; @@ -240,6 +261,9 @@ #cooling-cells = <2>; L2_600: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-size = <0x40000>; + cache-unified; next-level-cache = <&L3_0>; }; }; @@ -261,6 +285,9 @@ #cooling-cells = <2>; L2_700: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-size = <0x80000>; + cache-unified; next-level-cache = <&L3_0>; }; }; @@ -334,7 +361,6 @@ exit-latency-us = <6562>; min-residency-us = <9987>; local-timer-stop; - status = "disabled"; }; }; }; @@ -651,55 +677,55 @@ compatible = "arm,psci-1.0"; method = "smc"; - CPU_PD0: cpu0 { + CPU_PD0: power-domain-cpu0 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&LITTLE_CPU_SLEEP_0>; }; - CPU_PD1: cpu1 { + CPU_PD1: power-domain-cpu1 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&LITTLE_CPU_SLEEP_0>; }; - CPU_PD2: cpu2 { + CPU_PD2: power-domain-cpu2 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&LITTLE_CPU_SLEEP_0>; }; - CPU_PD3: cpu3 { + CPU_PD3: power-domain-cpu3 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&LITTLE_CPU_SLEEP_0>; }; - CPU_PD4: cpu4 { + CPU_PD4: power-domain-cpu4 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&BIG_CPU_SLEEP_0>; }; - CPU_PD5: cpu5 { + CPU_PD5: power-domain-cpu5 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&BIG_CPU_SLEEP_0>; }; - CPU_PD6: cpu6 { + CPU_PD6: power-domain-cpu6 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&BIG_CPU_SLEEP_0>; }; - CPU_PD7: cpu7 { + CPU_PD7: power-domain-cpu7 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&BIG_CPU_SLEEP_0>; }; - CLUSTER_PD: cpu-cluster0 { + CLUSTER_PD: power-domain-cpu-cluster0 { #power-domain-cells = <0>; domain-idle-states = <&CLUSTER_SLEEP_0>; }; @@ -1887,10 +1913,10 @@ status = "disabled"; pcie0_lane: phy@1c06200 { - reg = <0 0x1c06200 0 0x170>, /* tx */ - <0 0x1c06400 0 0x200>, /* rx */ - <0 0x1c06800 0 0x1f0>, /* pcs */ - <0 0x1c06c00 0 0xf4>; /* "pcs_lane" same as pcs_misc? */ + reg = <0 0x01c06200 0 0x170>, /* tx */ + <0 0x01c06400 0 0x200>, /* rx */ + <0 0x01c06800 0 0x1f0>, /* pcs */ + <0 0x01c06c00 0 0xf4>; /* "pcs_lane" same as pcs_misc? */ clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; clock-names = "pipe0"; @@ -1993,12 +2019,12 @@ status = "disabled"; pcie1_lane: phy@1c0e200 { - reg = <0 0x1c0e200 0 0x170>, /* tx0 */ - <0 0x1c0e400 0 0x200>, /* rx0 */ - <0 0x1c0ea00 0 0x1f0>, /* pcs */ - <0 0x1c0e600 0 0x170>, /* tx1 */ - <0 0x1c0e800 0 0x200>, /* rx1 */ - <0 0x1c0ee00 0 0xf4>; /* "pcs_com" same as pcs_misc? */ + reg = <0 0x01c0e200 0 0x170>, /* tx0 */ + <0 0x01c0e400 0 0x200>, /* rx0 */ + <0 0x01c0ea00 0 0x1f0>, /* pcs */ + <0 0x01c0e600 0 0x170>, /* tx1 */ + <0 0x01c0e800 0 0x200>, /* rx1 */ + <0 0x01c0ee00 0 0xf4>; /* "pcs_com" same as pcs_misc? */ clocks = <&gcc GCC_PCIE_1_PIPE_CLK>; clock-names = "pipe0"; @@ -2082,7 +2108,7 @@ pcie2_phy: phy@1c16000 { compatible = "qcom,sm8250-qmp-modem-pcie-phy"; - reg = <0 0x1c16000 0 0x1c0>; + reg = <0 0x01c16000 0 0x1c0>; #address-cells = <2>; #size-cells = <2>; ranges; @@ -2101,12 +2127,12 @@ status = "disabled"; pcie2_lane: phy@1c16200 { - reg = <0 0x1c16200 0 0x170>, /* tx0 */ - <0 0x1c16400 0 0x200>, /* rx0 */ - <0 0x1c16a00 0 0x1f0>, /* pcs */ - <0 0x1c16600 0 0x170>, /* tx1 */ - <0 0x1c16800 0 0x200>, /* rx1 */ - <0 0x1c16e00 0 0xf4>; /* "pcs_com" same as pcs_misc? */ + reg = <0 0x01c16200 0 0x170>, /* tx0 */ + <0 0x01c16400 0 0x200>, /* rx0 */ + <0 0x01c16a00 0 0x1f0>, /* pcs */ + <0 0x01c16600 0 0x170>, /* tx1 */ + <0 0x01c16800 0 0x200>, /* rx1 */ + <0 0x01c16e00 0 0xf4>; /* "pcs_com" same as pcs_misc? */ clocks = <&gcc GCC_PCIE_2_PIPE_CLK>; clock-names = "pipe0"; @@ -2189,13 +2215,6 @@ }; }; - ipa_virt: interconnect@1e00000 { - compatible = "qcom,sm8250-ipa-virt"; - reg = <0 0x01e00000 0 0x1000>; - #interconnect-cells = <1>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - tcsr_mutex: hwlock@1f40000 { compatible = "qcom,tcsr-mutex"; reg = <0x0 0x01f40000 0x0 0x40000>; @@ -2215,12 +2234,13 @@ clock-names = "mclk", "npl", "macro", "dcodec", "va", "fsgen"; #clock-cells = <0>; - clock-frequency = <9600000>; clock-output-names = "mclk"; #sound-dai-cells = <1>; pinctrl-names = "default"; pinctrl-0 = <&wsa_swr_active>; + + status = "disabled"; }; swr0: soundwire-controller@3250000 { @@ -2241,6 +2261,8 @@ #sound-dai-cells = <1>; #address-cells = <2>; #size-cells = <0>; + + status = "disabled"; }; audiocc: clock-controller@3300000 { @@ -2263,7 +2285,6 @@ clock-names = "mclk", "macro", "dcodec"; #clock-cells = <0>; - clock-frequency = <9600000>; clock-output-names = "fsgen"; #sound-dai-cells = <1>; }; @@ -2284,7 +2305,6 @@ clock-names = "mclk", "npl", "macro", "dcodec", "fsgen"; #clock-cells = <0>; - clock-frequency = <9600000>; clock-output-names = "mclk"; #sound-dai-cells = <1>; }; @@ -2300,15 +2320,15 @@ qcom,din-ports = <0>; qcom,dout-ports = <5>; - qcom,ports-sinterval-low = /bits/ 8 <0x03 0x1F 0x1F 0x07 0x00>; - qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0B 0x01 0x00>; - qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0B 0x00 0x00>; - qcom,ports-hstart = /bits/ 8 <0xFF 0x03 0xFF 0xFF 0xFF>; - qcom,ports-hstop = /bits/ 8 <0xFF 0x06 0xFF 0xFF 0xFF>; - qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xFF 0xFF>; - qcom,ports-block-pack-mode = /bits/ 8 <0xFF 0x00 0x01 0xFF 0xFF>; + qcom,ports-sinterval-low = /bits/ 8 <0x03 0x1f 0x1f 0x07 0x00>; + qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0b 0x01 0x00>; + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0b 0x00 0x00>; + qcom,ports-hstart = /bits/ 8 <0xff 0x03 0xff 0xff 0xff>; + qcom,ports-hstop = /bits/ 8 <0xff 0x06 0xff 0xff 0xff>; + qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xff 0xff>; + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0x00 0x01 0xff 0xff>; qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00>; - qcom,ports-block-group-count = /bits/ 8 <0xFF 0xFF 0xFF 0xFF 0x00>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0x00>; #sound-dai-cells = <1>; #address-cells = <2>; @@ -2331,10 +2351,7 @@ clock-names = "mclk", "npl", "macro", "dcodec", "fsgen"; #clock-cells = <0>; - clock-frequency = <9600000>; clock-output-names = "mclk"; - #address-cells = <2>; - #size-cells = <2>; #sound-dai-cells = <1>; }; @@ -2352,15 +2369,15 @@ qcom,din-ports = <5>; qcom,dout-ports = <0>; - qcom,ports-sinterval-low = /bits/ 8 <0xFF 0x01 0x01 0x03 0x03>; - qcom,ports-offset1 = /bits/ 8 <0xFF 0x01 0x00 0x02 0x00>; - qcom,ports-offset2 = /bits/ 8 <0xFF 0x00 0x00 0x00 0x00>; - qcom,ports-block-pack-mode = /bits/ 8 <0xFF 0xFF 0xFF 0xFF 0xFF>; - qcom,ports-hstart = /bits/ 8 <0xFF 0xFF 0xFF 0xFF 0xFF>; - qcom,ports-hstop = /bits/ 8 <0xFF 0xFF 0xFF 0xFF 0xFF>; - qcom,ports-word-length = /bits/ 8 <0xFF 0xFF 0xFF 0xFF 0xFF>; - qcom,ports-block-group-count = /bits/ 8 <0xFF 0xFF 0xFF 0xFF 0xFF>; - qcom,ports-lane-control = /bits/ 8 <0xFF 0x00 0x01 0x00 0x01>; + qcom,ports-sinterval-low = /bits/ 8 <0xff 0x01 0x01 0x03 0x03>; + qcom,ports-offset1 = /bits/ 8 <0xff 0x01 0x00 0x02 0x00>; + qcom,ports-offset2 = /bits/ 8 <0xff 0x00 0x00 0x00 0x00>; + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0xff 0xff 0xff>; + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff>; + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff>; + qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0xff 0x00 0x01 0x00 0x01>; #sound-dai-cells = <1>; #address-cells = <2>; #size-cells = <0>; @@ -2376,7 +2393,7 @@ clock-names = "core", "audio", "bus"; }; - lpass_tlmm: pinctrl@33c0000{ + lpass_tlmm: pinctrl@33c0000 { compatible = "qcom,sm8250-lpass-lpi-pinctrl"; reg = <0 0x033c0000 0x0 0x20000>, <0 0x03550000 0x0 0x10000>; @@ -3323,9 +3340,6 @@ }; }; - sound: sound { - }; - usb_1_hsphy: phy@88e3000 { compatible = "qcom,sm8250-usb-hs-phy", "qcom,usb-snps-hs-7nm-phy"; @@ -3676,7 +3690,7 @@ }; cci0: cci@ac4f000 { - compatible = "qcom,sm8250-cci"; + compatible = "qcom,sm8250-cci", "qcom,msm8996-cci"; #address-cells = <1>; #size-cells = <0>; @@ -3717,7 +3731,7 @@ }; cci1: cci@ac50000 { - compatible = "qcom,sm8250-cci"; + compatible = "qcom,sm8250-cci", "qcom,msm8996-cci"; #address-cells = <1>; #size-cells = <0>; @@ -3761,16 +3775,16 @@ compatible = "qcom,sm8250-camss"; status = "disabled"; - reg = <0 0xac6a000 0 0x2000>, - <0 0xac6c000 0 0x2000>, - <0 0xac6e000 0 0x1000>, - <0 0xac70000 0 0x1000>, - <0 0xac72000 0 0x1000>, - <0 0xac74000 0 0x1000>, - <0 0xacb4000 0 0xd000>, - <0 0xacc3000 0 0xd000>, - <0 0xacd9000 0 0x2200>, - <0 0xacdb200 0 0x2200>; + reg = <0 0x0ac6a000 0 0x2000>, + <0 0x0ac6c000 0 0x2000>, + <0 0x0ac6e000 0 0x1000>, + <0 0x0ac70000 0 0x1000>, + <0 0x0ac72000 0 0x1000>, + <0 0x0ac74000 0 0x1000>, + <0 0x0acb4000 0 0xd000>, + <0 0x0acc3000 0 0xd000>, + <0 0x0acd9000 0 0x2200>, + <0 0x0acdb200 0 0x2200>; reg-names = "csiphy0", "csiphy1", "csiphy2", @@ -3955,7 +3969,7 @@ #power-domain-cells = <1>; }; - mdss: mdss@ae00000 { + mdss: display-subsystem@ae00000 { compatible = "qcom,sm8250-mdss"; reg = <0 0x0ae00000 0 0x1000>; reg-names = "mdss"; @@ -4050,7 +4064,8 @@ }; dsi0: dsi@ae94000 { - compatible = "qcom,mdss-dsi-ctrl"; + compatible = "qcom,sm8250-dsi-ctrl", + "qcom,mdss-dsi-ctrl"; reg = <0 0x0ae94000 0 0x400>; reg-names = "dsi_ctrl"; @@ -4141,7 +4156,8 @@ }; dsi1: dsi@ae96000 { - compatible = "qcom,mdss-dsi-ctrl"; + compatible = "qcom,sm8250-dsi-ctrl", + "qcom,mdss-dsi-ctrl"; reg = <0 0x0ae96000 0 0x400>; reg-names = "dsi_ctrl"; @@ -4269,7 +4285,7 @@ #thermal-sensor-cells = <1>; }; - aoss_qmp: power-controller@c300000 { + aoss_qmp: power-management@c300000 { compatible = "qcom,sm8250-aoss-qmp", "qcom,aoss-qmp"; reg = <0 0x0c300000 0 0x400>; interrupts-extended = <&ipcc IPCC_CLIENT_AOP @@ -5468,6 +5484,9 @@ }; }; + sound: sound { + }; + timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 13 @@ -5500,7 +5519,7 @@ type = "passive"; }; - cpu0_crit: cpu_crit { + cpu0_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -5544,7 +5563,7 @@ type = "passive"; }; - cpu1_crit: cpu_crit { + cpu1_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -5588,7 +5607,7 @@ type = "passive"; }; - cpu2_crit: cpu_crit { + cpu2_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -5632,7 +5651,7 @@ type = "passive"; }; - cpu3_crit: cpu_crit { + cpu3_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -5676,7 +5695,7 @@ type = "passive"; }; - cpu4_top_crit: cpu_crit { + cpu4_top_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -5720,7 +5739,7 @@ type = "passive"; }; - cpu5_top_crit: cpu_crit { + cpu5_top_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -5764,7 +5783,7 @@ type = "passive"; }; - cpu6_top_crit: cpu_crit { + cpu6_top_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -5808,7 +5827,7 @@ type = "passive"; }; - cpu7_top_crit: cpu_crit { + cpu7_top_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -5852,7 +5871,7 @@ type = "passive"; }; - cpu4_bottom_crit: cpu_crit { + cpu4_bottom_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -5896,7 +5915,7 @@ type = "passive"; }; - cpu5_bottom_crit: cpu_crit { + cpu5_bottom_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -5940,7 +5959,7 @@ type = "passive"; }; - cpu6_bottom_crit: cpu_crit { + cpu6_bottom_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -5984,7 +6003,7 @@ type = "passive"; }; - cpu7_bottom_crit: cpu_crit { + cpu7_bottom_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts index 26a608144886..09baf6959c71 100644 --- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts @@ -20,6 +20,17 @@ stdout-path = "serial0:115200n8"; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <<9611_out>; + }; + }; + }; + vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; regulator-name = "vph_pwr"; @@ -29,6 +40,31 @@ regulator-always-on; regulator-boot-on; }; + + lt9611_1v2: lt9611-1v2-regulator { + compatible = "regulator-fixed"; + regulator-name = "LT9611_1V2"; + + vin-supply = <&vph_pwr>; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + gpio = <&tlmm 49 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + }; + + lt9611_3v3: lt9611-3v3-regulator { + compatible = "regulator-fixed"; + regulator-name = "LT9611_3V3"; + + vin-supply = <&vreg_bob>; + gpio = <&tlmm 47 GPIO_ACTIVE_HIGH>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + regulator-boot-on; + regulator-always-on; + }; }; &adsp { @@ -37,7 +73,7 @@ }; &apps_rsc { - pm8350-rpmh-regulators { + regulators-0 { compatible = "qcom,pm8350-rpmh-regulators"; qcom,pmic-id = "b"; @@ -142,7 +178,7 @@ }; }; - pm8350c-rpmh-regulators { + regulators-1 { compatible = "qcom,pm8350c-rpmh-regulators"; qcom,pmic-id = "c"; @@ -221,19 +257,135 @@ firmware-name = "qcom/sm8350/cdsp.mbn"; }; +&dispcc { + status = "okay"; +}; + +&mdss_dsi0 { + vdda-supply = <&vreg_l6b_1p2>; + status = "okay"; + + ports { + port@1 { + endpoint { + remote-endpoint = <<9611_a>; + data-lanes = <0 1 2 3>; + }; + }; + }; +}; + +&mdss_dsi0_phy { + vdds-supply = <&vreg_l5b_0p88>; + status = "okay"; +}; + &gpi_dma1 { status = "okay"; }; +&gpu { + status = "okay"; + + zap-shader { + firmware-name = "qcom/sm8350/a660_zap.mbn"; + }; +}; + +&i2c15 { + clock-frequency = <400000>; + status = "okay"; + + lt9611_codec: hdmi-bridge@2b { + compatible = "lontium,lt9611uxc"; + reg = <0x2b>; + + interrupts-extended = <&tlmm 50 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&tlmm 48 GPIO_ACTIVE_HIGH>; + + vdd-supply = <<9611_1v2>; + vcc-supply = <<9611_3v3>; + + pinctrl-names = "default"; + pinctrl-0 = <<9611_state>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lt9611_a: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + + port@2 { + reg = <2>; + + lt9611_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; +}; + +&mdss { + status = "okay"; +}; + +&mdss_mdp { + status = "okay"; +}; + &mpss { status = "okay"; firmware-name = "qcom/sm8350/modem.mbn"; }; +&pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie0_default_state>; + + perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + + status = "okay"; +}; + +&pcie0_phy { + vdda-phy-supply = <&vreg_l5b_0p88>; + vdda-pll-supply = <&vreg_l6b_1p2>; + + status = "okay"; +}; + +&pcie1 { + perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_default_state>; + + status = "okay"; +}; + +&pcie1_phy { + status = "okay"; + vdda-phy-supply = <&vreg_l5b_0p88>; + vdda-pll-supply = <&vreg_l6b_1p2>; +}; + &qupv3_id_0 { status = "okay"; }; +&qupv3_id_2 { + status = "okay"; +}; + &slpi { status = "okay"; firmware-name = "qcom/sm8350/slpi.mbn"; @@ -241,6 +393,258 @@ &tlmm { gpio-reserved-ranges = <52 8>; + + gpio-line-names = + "APPS_I2C_SDA", /* GPIO_0 */ + "APPS_I2C_SCL", + "FSA_INT_N", + "USER_LED3_EN", + "SMBUS_SDA_1P8", + "SMBUS_SCL_1P8", + "2M2_3P3_EN", + "ALERT_DUAL_M2_N", + "EXP_UART_CTS", + "EXP_UART_RFR", + "EXP_UART_TX", /* GPIO_10 */ + "EXP_UART_RX", + "NC", + "NC", + "RCM_MARKER1", + "WSA0_EN", + "CAM1_RESET_N", + "CAM0_RESET_N", + "DEBUG_UART_TX", + "DEBUG_UART_RX", + "TS_I2C_SDA", /* GPIO_20 */ + "TS_I2C_SCL", + "TS_RESET_N", + "TS_INT_N", + "DISP0_RESET_N", + "DISP1_RESET_N", + "ETH_RESET", + "RCM_MARKER2", + "CAM_DC_MIPI_MUX_EN", + "CAM_DC_MIPI_MUX_SEL", + "AFC_PHY_TA_D_PLUS", /* GPIO_30 */ + "AFC_PHY_TA_D_MINUS", + "PM8008_1_IRQ", + "PM8008_1_RESET_N", + "PM8008_2_IRQ", + "PM8008_2_RESET_N", + "CAM_DC_I3C_SDA", + "CAM_DC_I3C_SCL", + "FP_INT_N", + "FP_WUHB_INT_N", + "SMB_SPMI_DATA", /* GPIO_40 */ + "SMB_SPMI_CLK", + "USB_HUB_RESET", + "FORCE_USB_BOOT", + "LRF_IRQ", + "NC", + "IMU2_INT", + "HDMI_3P3_EN", + "HDMI_RSTN", + "HDMI_1P2_EN", + "HDMI_INT", /* GPIO_50 */ + "USB1_ID", + "FP_SPI_MISO", + "FP_SPI_MOSI", + "FP_SPI_CLK", + "FP_SPI_CS_N", + "NFC_ESE_SPI_MISO", + "NFC_ESE_SPI_MOSI", + "NFC_ESE_SPI_CLK", + "NFC_ESE_SPI_CS", + "NFC_I2C_SDA", /* GPIO_60 */ + "NFC_I2C_SCLC", + "NFC_EN", + "NFC_CLK_REQ", + "HST_WLAN_EN", + "HST_BT_EN", + "HST_SW_CTRL", + "NC", + "HST_BT_UART_CTS", + "HST_BT_UART_RFR", + "HST_BT_UART_TX", /* GPIO_70 */ + "HST_BT_UART_RX", + "CAM_DC_SPI0_MISO", + "CAM_DC_SPI0_MOSI", + "CAM_DC_SPI0_CLK", + "CAM_DC_SPI0_CS_N", + "CAM_DC_SPI1_MISO", + "CAM_DC_SPI1_MOSI", + "CAM_DC_SPI1_CLK", + "CAM_DC_SPI1_CS_N", + "HALL_INT_N", /* GPIO_80 */ + "USB_PHY_PS", + "MDP_VSYNC_P", + "MDP_VSYNC_S", + "ETH_3P3_EN", + "RADAR_INT", + "NFC_DWL_REQ", + "SM_GPIO_87", + "WCD_RESET_N", + "ALSP_INT_N", + "PRESS_INT", /* GPIO_90 */ + "SAR_INT_N", + "SD_CARD_DET_N", + "NC", + "PCIE0_RESET_N", + "PCIE0_CLK_REQ_N", + "PCIE0_WAKE_N", + "PCIE1_RESET_N", + "PCIE1_CLK_REQ_N", + "PCIE1_WAKE_N", + "CAM_MCLK0", /* GPIO_100 */ + "CAM_MCLK1", + "CAM_MCLK2", + "CAM_MCLK3", + "CAM_MCLK4", + "CAM_MCLK5", + "CAM2_RESET_N", + "CCI_I2C0_SDA", + "CCI_I2C0_SCL", + "CCI_I2C1_SDA", + "CCI_I2C1_SCL", /* GPIO_110 */ + "CCI_I2C2_SDA", + "CCI_I2C2_SCL", + "CCI_I2C3_SDA", + "CCI_I2C3_SCL", + "CAM5_RESET_N", + "CAM4_RESET_N", + "CAM3_RESET_N", + "IMU1_INT", + "MAG_INT_N", + "MI2S2_I2S_SCK", /* GPIO_120 */ + "MI2S2_I2S_DAT0", + "MI2S2_I2S_WS", + "HIFI_DAC_I2S_MCLK", + "MI2S2_I2S_DAT1", + "HIFI_DAC_I2S_SCK", + "HIFI_DAC_I2S_DAT0", + "NC", + "HIFI_DAC_I2S_WS", + "HST_BT_WLAN_SLIMBUS_CLK", + "HST_BT_WLAN_SLIMBUS_DAT0", /* GPIO_130 */ + "BT_LED_EN", + "WLAN_LED_EN", + "NC", + "NC", + "NC", + "UIM2_PRESENT", + "NC", + "NC", + "NC", + "UIM1_PRESENT", /* GPIO_140 */ + "NC", + "SM_RFFE0_DATA", + "NC", + "SM_RFFE1_DATA", + "SM_MSS_GRFC4", + "SM_MSS_GRFC5", + "SM_MSS_GRFC6", + "SM_MSS_GRFC7", + "SM_RFFE4_CLK", + "SM_RFFE4_DATA", /* GPIO_150 */ + "WLAN_COEX_UART1_RX", + "WLAN_COEX_UART1_TX", + "HST_SW_CTRL", + "DSI0_STATUS", + "DSI1_STATUS", + "APPS_PBL_BOOT_SPEED_1", + "APPS_BOOT_FROM_ROM", + "APPS_PBL_BOOT_SPEED_0", + "QLINK0_REQ", + "QLINK0_EN", /* GPIO_160 */ + "QLINK0_WMSS_RESET_N", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "WCD_SWR_TX_CLK", + "WCD_SWR_TX_DATA0", + "WCD_SWR_TX_DATA1", /* GPIO_170 */ + "WCD_SWR_RX_CLK", + "WCD_SWR_RX_DATA0", + "WCD_SWR_RX_DATA1", + "DMIC01_CLK", + "DMIC01_DATA", + "DMIC23_CLK", + "DMIC23_DATA", + "WSA_SWR_CLK", + "WSA_SWR_DATA", + "DMIC45_CLK", /* GPIO_180 */ + "DMIC45_DATA", + "WCD_SWR_TX_DATA2", + "SENSOR_I3C_SDA", + "SENSOR_I3C_SCL", + "CAM_OIS0_I3C_SDA", + "CAM_OIS0_I3C_SCL", + "IMU_SPI_MISO", + "IMU_SPI_MOSI", + "IMU_SPI_CLK", + "IMU_SPI_CS_N", /* GPIO_190 */ + "MAG_I2C_SDA", + "MAG_I2C_SCL", + "SENSOR_I2C_SDA", + "SENSOR_I2C_SCL", + "RADAR_SPI_MISO", + "RADAR_SPI_MOSI", + "RADAR_SPI_CLK", + "RADAR_SPI_CS_N", + "HST_BLE_UART_TX", + "HST_BLE_UART_RX", /* GPIO_200 */ + "HST_WLAN_UART_TX", + "HST_WLAN_UART_RX"; + + pcie0_default_state: pcie0-default-state { + perst-pins { + pins = "gpio94"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq-pins { + pins = "gpio95"; + function = "pcie0_clkreqn"; + drive-strength = <2>; + bias-pull-up; + }; + + wake-pins { + pins = "gpio96"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie1_default_state: pcie1-default-state { + perst-pins { + pins = "gpio97"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq-pins { + pins = "gpio98"; + function = "pcie1_clkreqn"; + drive-strength = <2>; + bias-pull-up; + }; + + wake-pins { + pins = "gpio99"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + }; &uart2 { @@ -325,4 +729,20 @@ drive-strength = <2>; output-low; }; + + lt9611_state: lt9611-state { + rst-pins { + pins = "gpio48"; + function = "gpio"; + + output-high; + input-disable; + }; + + irq-pins { + pins = "gpio50"; + function = "gpio"; + bias-disable; + }; + }; }; diff --git a/arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dts b/arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dts index 9c4cfd995ff2..b536ae36ae6d 100644 --- a/arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dts +++ b/arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dts @@ -44,7 +44,7 @@ }; &apps_rsc { - pm8350-rpmh-regulators { + regulators-0 { compatible = "qcom,pm8350-rpmh-regulators"; qcom,pmic-id = "b"; @@ -135,7 +135,7 @@ }; }; - pm8350c-rpmh-regulators { + regulators-1 { compatible = "qcom,pm8350c-rpmh-regulators"; qcom,pmic-id = "c"; @@ -290,9 +290,9 @@ }; &ipa { - status = "okay"; - + qcom,gsi-loader = "self"; memory-region = <&pil_ipa_fw_mem>; + status = "okay"; }; &mpss { diff --git a/arch/arm64/boot/dts/qcom/sm8350-mtp.dts b/arch/arm64/boot/dts/qcom/sm8350-mtp.dts index 52cf3045602f..d21d2aacf201 100644 --- a/arch/arm64/boot/dts/qcom/sm8350-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8350-mtp.dts @@ -43,7 +43,7 @@ }; &apps_rsc { - pm8350-rpmh-regulators { + regulators-0 { compatible = "qcom,pm8350-rpmh-regulators"; qcom,pmic-id = "b"; @@ -134,7 +134,7 @@ }; }; - pm8350c-rpmh-regulators { + regulators-1 { compatible = "qcom,pm8350c-rpmh-regulators"; qcom,pmic-id = "c"; @@ -376,7 +376,7 @@ }; &ipa { - status = "okay"; - + qcom,gsi-loader = "self"; memory-region = <&pil_ipa_fw_mem>; + status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx214.dts b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx214.dts index cc650508dc2d..e6824c8c2774 100644 --- a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx214.dts +++ b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx214.dts @@ -17,3 +17,26 @@ height = <2520>; stride = <(1080 * 4)>; }; + +&pm8350b_gpios { + gpio-line-names = "NC", /* GPIO_1 */ + "NC", + "NC", + "NC", + "SNAPSHOT_N", + "NC", + "NC", + "FOCUS_N"; +}; + +&pm8350c_gpios { + gpio-line-names = "FL_STROBE_TRIG_WIDE", /* GPIO_1 */ + "FL_STROBE_TRIG_TELE", + "NC", + "NC", + "NC", + "RGBC_IR_PWR_EN", + "NC", + "NC", + "WIDEC_PWR_EN"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx215.dts b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx215.dts index c74c973a69d2..c6f402c3ef35 100644 --- a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx215.dts +++ b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx215.dts @@ -12,6 +12,93 @@ compatible = "sony,pdx215-generic", "qcom,sm8350"; }; +&i2c13 { + pmic@75 { + compatible = "dlg,slg51000"; + reg = <0x75>; + dlg,cs-gpios = <&pm8350b_gpios 1 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&cam_pwr_a_cs>; + + regulators { + slg51000_a_ldo1: ldo1 { + regulator-name = "slg51000_a_ldo1"; + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3300000>; + }; + + slg51000_a_ldo2: ldo2 { + regulator-name = "slg51000_a_ldo2"; + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3300000>; + }; + + slg51000_a_ldo3: ldo3 { + regulator-name = "slg51000_a_ldo3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3750000>; + }; + + slg51000_a_ldo4: ldo4 { + regulator-name = "slg51000_a_ldo4"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3750000>; + }; + + slg51000_a_ldo5: ldo5 { + regulator-name = "slg51000_a_ldo5"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1200000>; + }; + + slg51000_a_ldo6: ldo6 { + regulator-name = "slg51000_a_ldo6"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1200000>; + }; + + slg51000_a_ldo7: ldo7 { + regulator-name = "slg51000_a_ldo7"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3750000>; + }; + }; + }; +}; + +&pm8350b_gpios { + gpio-line-names = "CAM_PWR_A_CS", /* GPIO_1 */ + "NC", + "NC", + "NC", + "SNAPSHOT_N", + "CAM_PWR_LD_EN", + "NC", + "FOCUS_N"; + + cam_pwr_a_cs: cam-pwr-a-cs-state { + pins = "gpio1"; + function = "normal"; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + power-source = <1>; + drive-push-pull; + output-high; + }; +}; + +&pm8350c_gpios { + gpio-line-names = "FL_STROBE_TRIG_WIDE", /* GPIO_1 */ + "FL_STROBE_TRIG_TELE", + "NC", + "WLC_TXPWR_EN", + "NC", + "RGBC_IR_PWR_EN", + "NC", + "NC", + "WIDEC_PWR_EN"; +}; + &tlmm { gpio-line-names = "APPS_I2C_0_SDA", /* GPIO_0 */ "APPS_I2C_0_SCL", diff --git a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi index 1f2d660f8f86..89382ad73133 100644 --- a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi @@ -3,6 +3,7 @@ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org> */ +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "sm8350.dtsi" #include "pm8350.dtsi" @@ -48,7 +49,35 @@ gpio-keys { compatible = "gpio-keys"; - /* For reasons still unknown, GAssist key and Camera Focus/Shutter don't work.. */ + pinctrl-names = "default"; + pinctrl-0 = <&focus_n &snapshot_n &vol_down_n &g_assist_n>; + + key-camera-focus { + label = "Camera Focus"; + linux,code = <KEY_CAMERA_FOCUS>; + gpios = <&pm8350b_gpios 8 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + + key-camera-snapshot { + label = "Camera Snapshot"; + linux,code = <KEY_CAMERA>; + gpios = <&pm8350b_gpios 5 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + + key-google-assist { + label = "Google Assistant Key"; + gpios = <&pm8350_gpios 9 GPIO_ACTIVE_LOW>; + linux,code = <KEY_LEFTMETA>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; key-vol-down { label = "Volume Down"; @@ -56,7 +85,7 @@ gpios = <&pmk8350_gpios 3 GPIO_ACTIVE_LOW>; debounce-interval = <15>; linux,can-disable; - gpio-key,wakeup; + wakeup-source; }; }; @@ -171,6 +200,8 @@ regulator-max-microvolt = <888000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; pm8350_l6: ldo6 { @@ -179,6 +210,8 @@ regulator-max-microvolt = <1208000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; pm8350_l7: ldo7 { @@ -187,6 +220,8 @@ regulator-max-microvolt = <3008000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; /* L8 - lcx.lvl (ARC) */ @@ -197,6 +232,8 @@ regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; }; @@ -443,13 +480,6 @@ /* Some subset of SONY IMX663 camera sensor @ 38 */ }; -&i2c2 { - status = "okay"; - clock-frequency = <400000>; - - /* Richwave RTC6226 FM Radio Receiver @ 64 */ -}; - &i2c4 { status = "okay"; clock-frequency = <400000>; @@ -461,7 +491,7 @@ status = "okay"; clock-frequency = <1000000>; - cs35l41_l: cs35l41@40 { + cs35l41_l: speaker-amp@40 { compatible = "cirrus,cs35l41"; reg = <0x40>; interrupt-parent = <&tlmm>; @@ -476,7 +506,7 @@ #sound-dai-cells = <1>; }; - cs35l41_r: cs35l41@41 { + cs35l41_r: speaker-amp@41 { compatible = "cirrus,cs35l41"; reg = <0x41>; interrupt-parent = <&tlmm>; @@ -506,7 +536,6 @@ clock-frequency = <100000>; /* Qualcomm PM8008i/PM8008j (?) @ 8, 9, c, d */ - /* Dialog SLG51000 CMIC @ 75 */ }; &i2c15 { @@ -524,9 +553,10 @@ }; &ipa { - status = "okay"; + qcom,gsi-loader = "self"; memory-region = <&pil_ipa_fw_mem>; firmware-name = "qcom/sm8350/Sony/sagami/ipa_fws.mbn"; + status = "okay"; }; &mpss { @@ -534,6 +564,60 @@ firmware-name = "qcom/sm8350/Sony/sagami/modem.mbn"; }; +&pm8350_gpios { + gpio-line-names = "ASSIGN1_THERM", /* GPIO_1 */ + "LCD_ID", + "SDR_MMW_THERM", + "RF_ID", + "NC", + "FP_LDO_EN", + "SP_ARI_PWR_ALARM", + "NC", + "G_ASSIST_N", + "PM8350_OPTION"; /* GPIO_10 */ + + g_assist_n: g-assist-n-state { + pins = "gpio9"; + function = "normal"; + power-source = <1>; + bias-pull-up; + input-enable; + }; +}; + +&pm8350b_gpios { + snapshot_n: snapshot-n-state { + pins = "gpio5"; + function = "normal"; + power-source = <0>; + bias-pull-up; + input-enable; + }; + + focus_n: focus-n-state { + pins = "gpio8"; + function = "normal"; + power-source = <0>; + input-enable; + bias-pull-up; + }; +}; + +&pmk8350_gpios { + gpio-line-names = "NC", /* GPIO_1 */ + "NC", + "VOL_DOWN_N", + "PMK8350_OPTION"; + + vol_down_n: vol-down-n-state { + pins = "gpio3"; + function = "normal"; + power-source = <0>; + bias-pull-up; + input-enable; + }; +}; + &pmk8350_rtc { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi index 245dce24ec59..1c97e28da6ad 100644 --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -3,9 +3,11 @@ * Copyright (c) 2020, Linaro Limited */ +#include <dt-bindings/interconnect/qcom,sm8350.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,dispcc-sm8350.h> #include <dt-bindings/clock/qcom,gcc-sm8350.h> +#include <dt-bindings/clock/qcom,gpucc-sm8350.h> #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/gpio/gpio.h> @@ -37,24 +39,6 @@ clock-frequency = <32000>; #clock-cells = <0>; }; - - ufs_phy_rx_symbol_0_clk: ufs-phy-rx-symbol-0 { - compatible = "fixed-clock"; - clock-frequency = <1000>; - #clock-cells = <0>; - }; - - ufs_phy_rx_symbol_1_clk: ufs-phy-rx-symbol-1 { - compatible = "fixed-clock"; - clock-frequency = <1000>; - #clock-cells = <0>; - }; - - ufs_phy_tx_symbol_0_clk: ufs-phy-tx-symbol-0 { - compatible = "fixed-clock"; - clock-frequency = <1000>; - #clock-cells = <0>; - }; }; cpus { @@ -73,9 +57,11 @@ #cooling-cells = <2>; L2_0: l2-cache { compatible = "cache"; + cache-level = <2>; next-level-cache = <&L3_0>; L3_0: l3-cache { compatible = "cache"; + cache-level = <3>; }; }; }; @@ -92,6 +78,7 @@ #cooling-cells = <2>; L2_100: l2-cache { compatible = "cache"; + cache-level = <2>; next-level-cache = <&L3_0>; }; }; @@ -108,6 +95,7 @@ #cooling-cells = <2>; L2_200: l2-cache { compatible = "cache"; + cache-level = <2>; next-level-cache = <&L3_0>; }; }; @@ -124,6 +112,7 @@ #cooling-cells = <2>; L2_300: l2-cache { compatible = "cache"; + cache-level = <2>; next-level-cache = <&L3_0>; }; }; @@ -140,6 +129,7 @@ #cooling-cells = <2>; L2_400: l2-cache { compatible = "cache"; + cache-level = <2>; next-level-cache = <&L3_0>; }; }; @@ -156,6 +146,7 @@ #cooling-cells = <2>; L2_500: l2-cache { compatible = "cache"; + cache-level = <2>; next-level-cache = <&L3_0>; }; @@ -173,6 +164,7 @@ #cooling-cells = <2>; L2_600: l2-cache { compatible = "cache"; + cache-level = <2>; next-level-cache = <&L3_0>; }; }; @@ -189,6 +181,7 @@ #cooling-cells = <2>; L2_700: l2-cache { compatible = "cache"; + cache-level = <2>; next-level-cache = <&L3_0>; }; }; @@ -288,55 +281,55 @@ compatible = "arm,psci-1.0"; method = "smc"; - CPU_PD0: cpu0 { + CPU_PD0: power-domain-cpu0 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&LITTLE_CPU_SLEEP_0>; }; - CPU_PD1: cpu1 { + CPU_PD1: power-domain-cpu1 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&LITTLE_CPU_SLEEP_0>; }; - CPU_PD2: cpu2 { + CPU_PD2: power-domain-cpu2 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&LITTLE_CPU_SLEEP_0>; }; - CPU_PD3: cpu3 { + CPU_PD3: power-domain-cpu3 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&LITTLE_CPU_SLEEP_0>; }; - CPU_PD4: cpu4 { + CPU_PD4: power-domain-cpu4 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&BIG_CPU_SLEEP_0>; }; - CPU_PD5: cpu5 { + CPU_PD5: power-domain-cpu5 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&BIG_CPU_SLEEP_0>; }; - CPU_PD6: cpu6 { + CPU_PD6: power-domain-cpu6 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&BIG_CPU_SLEEP_0>; }; - CPU_PD7: cpu7 { + CPU_PD7: power-domain-cpu7 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&BIG_CPU_SLEEP_0>; }; - CLUSTER_PD: cpu-cluster0 { + CLUSTER_PD: power-domain-cpu-cluster0 { #power-domain-cells = <0>; domain-idle-states = <&CLUSTER_SLEEP_0>; }; @@ -406,8 +399,10 @@ no-map; }; - smem_mem: memory@80900000 { + smem@80900000 { + compatible = "qcom,smem"; reg = <0x0 0x80900000 0x0 0x200000>; + hwlocks = <&tcsr_mutex 3>; no-map; }; @@ -516,12 +511,6 @@ }; }; - smem: qcom,smem { - compatible = "qcom,smem"; - memory-region = <&smem_mem>; - hwlocks = <&tcsr_mutex 3>; - }; - smp2p-adsp { compatible = "qcom,smp2p"; qcom,smem = <443>, <429>; @@ -656,14 +645,14 @@ "usb3_uni_phy_sec_gcc_usb30_pipe_clk"; clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>, + <&pcie0_phy>, + <&pcie1_phy>, <0>, <0>, <0>, - <0>, - <0>, - <&ufs_phy_rx_symbol_0_clk>, - <&ufs_phy_rx_symbol_1_clk>, - <&ufs_phy_tx_symbol_0_clk>, + <&ufs_mem_phy_lanes 0>, + <&ufs_mem_phy_lanes 1>, + <&ufs_mem_phy_lanes 2>, <0>, <0>; }; @@ -1043,8 +1032,6 @@ interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SM8350_CX>; operating-points-v2 = <&qup_opp_table_100mhz>; - #address-cells = <1>; - #size-cells = <0>; status = "disabled"; }; @@ -1435,165 +1422,303 @@ }; }; - apps_smmu: iommu@15000000 { - compatible = "qcom,sm8350-smmu-500", "arm,mmu-500"; - reg = <0 0x15000000 0 0x100000>; - #iommu-cells = <2>; - #global-interrupts = <2>; - interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>; + rng: rng@10d3000 { + compatible = "qcom,prng-ee"; + reg = <0 0x010d3000 0 0x1000>; + clocks = <&rpmhcc RPMH_HWKM_CLK>; + clock-names = "core"; }; config_noc: interconnect@1500000 { compatible = "qcom,sm8350-config-noc"; reg = <0 0x01500000 0 0xa580>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; mc_virt: interconnect@1580000 { compatible = "qcom,sm8350-mc-virt"; reg = <0 0x01580000 0 0x1000>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; system_noc: interconnect@1680000 { compatible = "qcom,sm8350-system-noc"; reg = <0 0x01680000 0 0x1c200>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; aggre1_noc: interconnect@16e0000 { compatible = "qcom,sm8350-aggre1-noc"; reg = <0 0x016e0000 0 0x1f180>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; aggre2_noc: interconnect@1700000 { compatible = "qcom,sm8350-aggre2-noc"; reg = <0 0x01700000 0 0x33000>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; mmss_noc: interconnect@1740000 { compatible = "qcom,sm8350-mmss-noc"; reg = <0 0x01740000 0 0x1f080>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; - lpass_ag_noc: interconnect@3c40000 { - compatible = "qcom,sm8350-lpass-ag-noc"; - reg = <0 0x03c40000 0 0xf080>; - #interconnect-cells = <1>; - qcom,bcm-voters = <&apps_bcm_voter>; + pcie0: pci@1c00000 { + compatible = "qcom,pcie-sm8350"; + reg = <0 0x01c00000 0 0x3000>, + <0 0x60000000 0 0xf1d>, + <0 0x60000f20 0 0xa8>, + <0 0x60001000 0 0x1000>, + <0 0x60100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0x3d00000>; + + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", "msi1", "msi2", "msi3", + "msi4", "msi5", "msi6", "msi7"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "tbu", + "ddrss_sf_tbu", + "aggre1", + "aggre0"; + + iommus = <&apps_smmu 0x1c00 0x7f>; + iommu-map = <0x0 &apps_smmu 0x1c00 0x1>, + <0x100 &apps_smmu 0x1c01 0x1>; + + resets = <&gcc GCC_PCIE_0_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_0_GDSC>; + + phys = <&pcie0_phy>; + phy-names = "pciephy"; + + status = "disabled"; }; - compute_noc: interconnect@a0c0000{ - compatible = "qcom,sm8350-compute-noc"; - reg = <0 0x0a0c0000 0 0xa180>; - #interconnect-cells = <1>; - qcom,bcm-voters = <&apps_bcm_voter>; + pcie0_phy: phy@1c06000 { + compatible = "qcom,sm8350-qmp-gen3x1-pcie-phy"; + reg = <0 0x01c06000 0 0x2000>; + clocks = <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_CLKREF_EN>, + <&gcc GCC_PCIE0_PHY_RCHNG_CLK>, + <&gcc GCC_PCIE_0_PIPE_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "rchng", "pipe"; + + resets = <&gcc GCC_PCIE_0_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE0_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + #clock-cells = <0>; + clock-output-names = "pcie_0_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + pcie1: pci@1c08000 { + compatible = "qcom,pcie-sm8350"; + reg = <0 0x01c08000 0 0x3000>, + <0 0x40000000 0 0xf1d>, + <0 0x40000f20 0 0xa8>, + <0 0x40001000 0 0x1000>, + <0 0x40100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + device_type = "pci"; + linux,pci-domain = <1>; + bus-range = <0x00 0xff>; + num-lanes = <2>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x40200000 0 0x40200000 0x0 0x100000>, + <0x02000000 0x0 0x40300000 0 0x40300000 0x0 0x1fd00000>; + + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_1_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "tbu", + "ddrss_sf_tbu", + "aggre1"; + + iommus = <&apps_smmu 0x1c80 0x7f>; + iommu-map = <0x0 &apps_smmu 0x1c80 0x1>, + <0x100 &apps_smmu 0x1c81 0x1>; + + resets = <&gcc GCC_PCIE_1_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_1_GDSC>; + + phys = <&pcie1_phy>; + phy-names = "pciephy"; + + status = "disabled"; + }; + + pcie1_phy: phy@1c0f000 { + compatible = "qcom,sm8350-qmp-gen3x2-pcie-phy"; + reg = <0 0x01c0e000 0 0x2000>; + clocks = <&gcc GCC_PCIE_1_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_CLKREF_EN>, + <&gcc GCC_PCIE1_PHY_RCHNG_CLK>, + <&gcc GCC_PCIE_1_PIPE_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "rchng", "pipe"; + + resets = <&gcc GCC_PCIE_1_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE1_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + #clock-cells = <0>; + clock-output-names = "pcie_1_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + ufs_mem_hc: ufshc@1d84000 { + compatible = "qcom,sm8350-ufshc", "qcom,ufshc", + "jedec,ufs-2.0"; + reg = <0 0x01d84000 0 0x3000>; + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; + phys = <&ufs_mem_phy_lanes>; + phy-names = "ufsphy"; + lanes-per-direction = <2>; + #reset-cells = <1>; + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + + power-domains = <&gcc UFS_PHY_GDSC>; + + iommus = <&apps_smmu 0xe0 0x0>; + + clock-names = + "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk"; + clocks = + <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; + freq-table-hz = + <75000000 300000000>, + <0 0>, + <0 0>, + <75000000 300000000>, + <0 0>, + <0 0>, + <0 0>, + <0 0>; + status = "disabled"; + }; + + ufs_mem_phy: phy@1d87000 { + compatible = "qcom,sm8350-qmp-ufs-phy"; + reg = <0 0x01d87000 0 0x1c4>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clock-names = "ref", + "ref_aux"; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + status = "disabled"; + + ufs_mem_phy_lanes: phy@1d87400 { + reg = <0 0x01d87400 0 0x188>, + <0 0x01d87600 0 0x200>, + <0 0x01d87c00 0 0x200>, + <0 0x01d87800 0 0x188>, + <0 0x01d87a00 0 0x200>; + #clock-cells = <1>; + #phy-cells = <0>; + }; }; ipa: ipa@1e40000 { @@ -1601,9 +1726,9 @@ iommus = <&apps_smmu 0x5c0 0x0>, <&apps_smmu 0x5c2 0x0>; - reg = <0 0x1e40000 0 0x8000>, - <0 0x1e50000 0 0x4b20>, - <0 0x1e04000 0 0x23000>; + reg = <0 0x01e40000 0 0x8000>, + <0 0x01e50000 0 0x4b20>, + <0 0x01e04000 0 0x23000>; reg-names = "ipa-reg", "ipa-shared", "gsi"; @@ -1620,8 +1745,8 @@ clocks = <&rpmhcc RPMH_IPA_CLK>; clock-names = "core"; - interconnects = <&aggre2_noc MASTER_IPA &mc_virt SLAVE_EBI1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_IPA_CFG>; + interconnects = <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_IPA_CFG 0>; interconnect-names = "memory", "config"; @@ -1641,6 +1766,190 @@ #hwlock-cells = <1>; }; + gpu: gpu@3d00000 { + compatible = "qcom,adreno-660.1", "qcom,adreno"; + + reg = <0 0x03d00000 0 0x40000>, + <0 0x03d9e000 0 0x1000>, + <0 0x03d61000 0 0x800>; + reg-names = "kgsl_3d0_reg_memory", + "cx_mem", + "cx_dbgc"; + + interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; + + iommus = <&adreno_smmu 0 0x400>, <&adreno_smmu 1 0x400>; + + operating-points-v2 = <&gpu_opp_table>; + + qcom,gmu = <&gmu>; + + status = "disabled"; + + zap-shader { + memory-region = <&pil_gpu_mem>; + }; + + /* note: downstream checks gpu binning for 670 Mhz */ + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-840000000 { + opp-hz = /bits/ 64 <840000000>; + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + }; + + opp-778000000 { + opp-hz = /bits/ 64 <778000000>; + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + }; + + opp-738000000 { + opp-hz = /bits/ 64 <738000000>; + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + opp-676000000 { + opp-hz = /bits/ 64 <676000000>; + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + opp-608000000 { + opp-hz = /bits/ 64 <608000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + opp-491000000 { + opp-hz = /bits/ 64 <491000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>; + }; + + opp-443000000 { + opp-hz = /bits/ 64 <443000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + opp-379000000 { + opp-hz = /bits/ 64 <379000000>; + opp-level = <80 /* RPMH_REGULATOR_LEVEL_LOW_SVS_L1 */>; + }; + + opp-315000000 { + opp-hz = /bits/ 64 <315000000>; + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + }; + }; + + gmu: gmu@3d6a000 { + compatible = "qcom,adreno-gmu-660.1", "qcom,adreno-gmu"; + + reg = <0 0x03d6a000 0 0x34000>, + <0 0x03de0000 0 0x10000>, + <0 0x0b290000 0 0x10000>; + reg-names = "gmu", "rscc", "gmu_pdc"; + + interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hfi", "gmu"; + + clocks = <&gpucc GPU_CC_CX_GMU_CLK>, + <&gpucc GPU_CC_CXO_CLK>, + <&gcc GCC_DDRSS_GPU_AXI_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gpucc GPU_CC_AHB_CLK>, + <&gpucc GPU_CC_HUB_CX_INT_CLK>, + <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>; + clock-names = "gmu", + "cxo", + "axi", + "memnoc", + "ahb", + "hub", + "smmu_vote"; + + power-domains = <&gpucc GPU_CX_GDSC>, + <&gpucc GPU_GX_GDSC>; + power-domain-names = "cx", + "gx"; + + iommus = <&adreno_smmu 5 0x400>; + + operating-points-v2 = <&gmu_opp_table>; + + gmu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + }; + }; + + gpucc: clock-controller@3d90000 { + compatible = "qcom,sm8350-gpucc"; + reg = <0 0x03d90000 0 0x9000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_GPU_GPLL0_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; + clock-names = "bi_tcxo", + "gcc_gpu_gpll0_clk_src", + "gcc_gpu_gpll0_div_clk_src"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + adreno_smmu: iommu@3da0000 { + compatible = "qcom,sm8350-smmu-500", "qcom,adreno-smmu", "arm,mmu-500"; + reg = <0 0x03da0000 0 0x20000>; + #iommu-cells = <2>; + #global-interrupts = <2>; + interrupts = <GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>, + <&gpucc GPU_CC_AHB_CLK>, + <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>, + <&gpucc GPU_CC_CX_GMU_CLK>, + <&gpucc GPU_CC_HUB_CX_INT_CLK>, + <&gpucc GPU_CC_HUB_AON_CLK>; + clock-names = "bus", + "iface", + "ahb", + "hlos1_vote_gpu_smmu", + "cx_gmu", + "hub_cx_int", + "hub_aon"; + + power-domains = <&gpucc GPU_CX_GDSC>; + dma-coherent; + }; + + lpass_ag_noc: interconnect@3c40000 { + compatible = "qcom,sm8350-lpass-ag-noc"; + reg = <0 0x03c40000 0 0xf080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + mpss: remoteproc@4080000 { compatible = "qcom,sm8350-mpss-pas"; reg = <0x0 0x04080000 0x0 0x4040>; @@ -1661,7 +1970,7 @@ <&rpmhpd SM8350_MSS>; power-domain-names = "cx", "mss"; - interconnects = <&mc_virt MASTER_LLCC &mc_virt SLAVE_EBI1>; + interconnects = <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>; memory-region = <&pil_modem_mem>; @@ -1683,6 +1992,653 @@ }; }; + slpi: remoteproc@5c00000 { + compatible = "qcom,sm8350-slpi-pas"; + reg = <0 0x05c00000 0 0x4000>; + + interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>, + <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_slpi_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SM8350_LCX>, + <&rpmhpd SM8350_LMX>; + power-domain-names = "lcx", "lmx"; + + memory-region = <&pil_slpi_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_slpi_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_SLPI + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_SLPI + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "slpi"; + qcom,remote-pid = <3>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "sdsp"; + qcom,non-secure-domain; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x0541 0x0>; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x0542 0x0>; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x0543 0x0>; + /* note: shared-cb = <4> in downstream */ + }; + }; + }; + }; + + sdhc_2: mmc@8804000 { + compatible = "qcom,sm8350-sdhci", "qcom,sdhci-msm-v5"; + reg = <0 0x08804000 0 0x1000>; + + interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "core", "xo"; + resets = <&gcc GCC_SDCC2_BCR>; + interconnects = <&aggre2_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>; + interconnect-names = "sdhc-ddr","cpu-sdhc"; + iommus = <&apps_smmu 0x4a0 0x0>; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&sdhc2_opp_table>; + bus-width = <4>; + dma-coherent; + + status = "disabled"; + + sdhc2_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-202000000 { + opp-hz = /bits/ 64 <202000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + usb_1_hsphy: phy@88e3000 { + compatible = "qcom,sm8350-usb-hs-phy", + "qcom,usb-snps-hs-7nm-phy"; + reg = <0 0x088e3000 0 0x400>; + status = "disabled"; + #phy-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + }; + + usb_2_hsphy: phy@88e4000 { + compatible = "qcom,sm8250-usb-hs-phy", + "qcom,usb-snps-hs-7nm-phy"; + reg = <0 0x088e4000 0 0x400>; + status = "disabled"; + #phy-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; + }; + + usb_1_qmpphy: phy-wrapper@88e9000 { + compatible = "qcom,sm8350-qmp-usb3-phy"; + reg = <0 0x088e9000 0 0x200>, + <0 0x088e8000 0 0x20>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; + clock-names = "aux", "ref_clk_src", "com_aux"; + + resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, + <&gcc GCC_USB3_PHY_PRIM_BCR>; + reset-names = "phy", "common"; + + usb_1_ssphy: phy@88e9200 { + reg = <0 0x088e9200 0 0x200>, + <0 0x088e9400 0 0x200>, + <0 0x088e9c00 0 0x400>, + <0 0x088e9600 0 0x200>, + <0 0x088e9800 0 0x200>, + <0 0x088e9a00 0 0x100>; + #phy-cells = <0>; + #clock-cells = <0>; + clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_phy_pipe_clk_src"; + }; + }; + + usb_2_qmpphy: phy-wrapper@88eb000 { + compatible = "qcom,sm8350-qmp-usb3-uni-phy"; + reg = <0 0x088eb000 0 0x200>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_SEC_CLKREF_EN>, + <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>; + clock-names = "aux", "ref_clk_src", "ref", "com_aux"; + + resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>, + <&gcc GCC_USB3_PHY_SEC_BCR>; + reset-names = "phy", "common"; + + usb_2_ssphy: phy@88ebe00 { + reg = <0 0x088ebe00 0 0x200>, + <0 0x088ec000 0 0x200>, + <0 0x088eb200 0 0x1100>; + #phy-cells = <0>; + #clock-cells = <0>; + clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_uni_phy_pipe_clk_src"; + }; + }; + + dc_noc: interconnect@90c0000 { + compatible = "qcom,sm8350-dc-noc"; + reg = <0 0x090c0000 0 0x4200>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + gem_noc: interconnect@9100000 { + compatible = "qcom,sm8350-gem-noc"; + reg = <0 0x09100000 0 0xb4000>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system-cache-controller@9200000 { + compatible = "qcom,sm8350-llcc"; + reg = <0 0x09200000 0 0x1d0000>, <0 0x09600000 0 0x50000>; + reg-names = "llcc_base", "llcc_broadcast_base"; + }; + + compute_noc: interconnect@a0c0000 { + compatible = "qcom,sm8350-compute-noc"; + reg = <0 0x0a0c0000 0 0xa180>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + usb_1: usb@a6f8800 { + compatible = "qcom,sm8350-dwc3", "qcom,dwc3"; + reg = <0 0x0a6f8800 0 0x400>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 15 IRQ_TYPE_EDGE_BOTH>, + <&pdc 14 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "hs_phy_irq", + "ss_phy_irq", + "dm_hs_phy_irq", + "dp_hs_phy_irq"; + + power-domains = <&gcc USB30_PRIM_GDSC>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + usb_1_dwc3: usb@a600000 { + compatible = "snps,dwc3"; + reg = <0 0x0a600000 0 0xcd00>; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x0 0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_1_hsphy>, <&usb_1_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + usb_2: usb@a8f8800 { + compatible = "qcom,sm8350-dwc3", "qcom,dwc3"; + reg = <0 0x0a8f8800 0 0x400>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_SLEEP_CLK>, + <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, + <&gcc GCC_USB3_SEC_CLKREF_EN>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "xo"; + + assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 16 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 13 IRQ_TYPE_EDGE_BOTH>, + <&pdc 12 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "hs_phy_irq", + "ss_phy_irq", + "dm_hs_phy_irq", + "dp_hs_phy_irq"; + + power-domains = <&gcc USB30_SEC_GDSC>; + + resets = <&gcc GCC_USB30_SEC_BCR>; + + usb_2_dwc3: usb@a800000 { + compatible = "snps,dwc3"; + reg = <0 0x0a800000 0 0xcd00>; + interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x20 0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_2_hsphy>, <&usb_2_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + mdss: display-subsystem@ae00000 { + compatible = "qcom,sm8350-mdss"; + reg = <0 0x0ae00000 0 0x1000>; + reg-names = "mdss"; + + interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>, + <&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "mdp0-mem", "mdp1-mem"; + + power-domains = <&dispcc MDSS_GDSC>; + resets = <&dispcc DISP_CC_MDSS_CORE_BCR>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", "bus", "nrt_bus", "core"; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + iommus = <&apps_smmu 0x820 0x402>; + + status = "disabled"; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + dpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + /* TODO: opp-200000000 should work with + * &rpmhpd_opp_low_svs, but one some of + * sm8350_hdk boards reboot using this + * opp. + */ + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-345000000 { + opp-hz = /bits/ 64 <345000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-460000000 { + opp-hz = /bits/ 64 <460000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + + mdss_mdp: display-controller@ae01000 { + compatible = "qcom,sm8350-dpu"; + reg = <0 0x0ae01000 0 0x8f000>, + <0 0x0aeb0000 0 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", + "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&dpu_opp_table>; + power-domains = <&rpmhpd SM8350_MMCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf2_out: endpoint { + remote-endpoint = <&mdss_dsi1_in>; + }; + }; + }; + }; + + mdss_dsi0: dsi@ae94000 { + compatible = "qcom,sm8350-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0 0x0ae94000 0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>; + + operating-points-v2 = <&dsi0_opp_table>; + power-domains = <&rpmhpd SM8350_MMCX>; + + phys = <&mdss_dsi0_phy>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + dsi0_opp_table: opp-table { + compatible = "operating-points-v2"; + + /* TODO: opp-187500000 should work with + * &rpmhpd_opp_low_svs, but one some of + * sm8350_hdk boards reboot using this + * opp. + */ + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi0_out: endpoint { + }; + }; + }; + }; + + mdss_dsi0_phy: phy@ae94400 { + compatible = "qcom,sm8350-dsi-phy-5nm"; + reg = <0 0x0ae94400 0 0x200>, + <0 0x0ae94600 0 0x280>, + <0 0x0ae94900 0 0x27c>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + + status = "disabled"; + }; + + mdss_dsi1: dsi@ae96000 { + compatible = "qcom,sm8350-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0 0x0ae96000 0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <5>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>, + <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK>, + <&dispcc DISP_CC_MDSS_ESC1_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi1_phy 0>, + <&mdss_dsi1_phy 1>; + + operating-points-v2 = <&dsi1_opp_table>; + power-domains = <&rpmhpd SM8350_MMCX>; + + phys = <&mdss_dsi1_phy>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + dsi1_opp_table: opp-table { + compatible = "operating-points-v2"; + + /* TODO: opp-187500000 should work with + * &rpmhpd_opp_low_svs, but one some of + * sm8350_hdk boards reboot using this + * opp. + */ + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi1_in: endpoint { + remote-endpoint = <&dpu_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi1_out: endpoint { + }; + }; + }; + }; + + mdss_dsi1_phy: phy@ae96400 { + compatible = "qcom,sm8350-dsi-phy-5nm"; + reg = <0 0x0ae96400 0 0x200>, + <0 0x0ae96600 0 0x280>, + <0 0x0ae96900 0 0x27c>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + + status = "disabled"; + }; + }; + + dispcc: clock-controller@af00000 { + compatible = "qcom,sm8350-dispcc"; + reg = <0 0x0af00000 0 0x10000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>, + <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>, + <0>, + <0>; + clock-names = "bi_tcxo", + "dsi0_phy_pll_out_byteclk", + "dsi0_phy_pll_out_dsiclk", + "dsi1_phy_pll_out_byteclk", + "dsi1_phy_pll_out_dsiclk", + "dp_phy_pll_link_clk", + "dp_phy_pll_vco_div_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + + power-domains = <&rpmhpd SM8350_MMCX>; + }; + pdc: interrupt-controller@b220000 { compatible = "qcom,sm8350-pdc", "qcom,pdc"; reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>; @@ -1717,7 +2673,7 @@ #thermal-sensor-cells = <1>; }; - aoss_qmp: power-controller@c300000 { + aoss_qmp: power-management@c300000 { compatible = "qcom,sm8350-aoss-qmp", "qcom,aoss-qmp"; reg = <0 0x0c300000 0 0x400>; interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP @@ -1734,11 +2690,11 @@ spmi_bus: spmi@c440000 { compatible = "qcom,spmi-pmic-arb"; - reg = <0x0 0xc440000 0x0 0x1100>, - <0x0 0xc600000 0x0 0x2000000>, - <0x0 0xe600000 0x0 0x100000>, - <0x0 0xe700000 0x0 0xa0000>, - <0x0 0xc40a000 0x0 0x26000>; + reg = <0x0 0x0c440000 0x0 0x1100>, + <0x0 0x0c600000 0x0 0x2000000>, + <0x0 0x0e600000 0x0 0x100000>, + <0x0 0x0e700000 0x0 0xa0000>, + <0x0 0x0c40a000 0x0 0x26000>; reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; interrupt-names = "periph_irq"; interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; @@ -1953,11 +2909,176 @@ }; }; - rng: rng@10d3000 { - compatible = "qcom,prng-ee"; - reg = <0 0x010d3000 0 0x1000>; - clocks = <&rpmhcc RPMH_HWKM_CLK>; - clock-names = "core"; + apps_smmu: iommu@15000000 { + compatible = "qcom,sm8350-smmu-500", "arm,mmu-500"; + reg = <0 0x15000000 0 0x100000>; + #iommu-cells = <2>; + #global-interrupts = <2>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>; + }; + + adsp: remoteproc@17300000 { + compatible = "qcom,sm8350-adsp-pas"; + reg = <0 0x17300000 0 0x100>; + + interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>, + <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SM8350_LCX>, + <&rpmhpd SM8350_LMX>; + power-domain-names = "lcx", "lmx"; + + memory-region = <&pil_adsp_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_adsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "lpass"; + qcom,remote-pid = <2>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "adsp"; + qcom,non-secure-domain; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x1803 0x0>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x1804 0x0>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x1805 0x0>; + }; + }; + }; }; intc: interrupt-controller@17a00000 { @@ -2121,145 +3242,6 @@ #freq-domain-cells = <1>; }; - ufs_mem_hc: ufshc@1d84000 { - compatible = "qcom,sm8350-ufshc", "qcom,ufshc", - "jedec,ufs-2.0"; - reg = <0 0x01d84000 0 0x3000>; - interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; - phys = <&ufs_mem_phy_lanes>; - phy-names = "ufsphy"; - lanes-per-direction = <2>; - #reset-cells = <1>; - resets = <&gcc GCC_UFS_PHY_BCR>; - reset-names = "rst"; - - power-domains = <&gcc UFS_PHY_GDSC>; - - iommus = <&apps_smmu 0xe0 0x0>; - - clock-names = - "core_clk", - "bus_aggr_clk", - "iface_clk", - "core_clk_unipro", - "ref_clk", - "tx_lane0_sync_clk", - "rx_lane0_sync_clk", - "rx_lane1_sync_clk"; - clocks = - <&gcc GCC_UFS_PHY_AXI_CLK>, - <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, - <&gcc GCC_UFS_PHY_AHB_CLK>, - <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, - <&rpmhcc RPMH_CXO_CLK>, - <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, - <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, - <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; - freq-table-hz = - <75000000 300000000>, - <0 0>, - <0 0>, - <75000000 300000000>, - <0 0>, - <0 0>, - <0 0>, - <0 0>; - status = "disabled"; - }; - - ufs_mem_phy: phy@1d87000 { - compatible = "qcom,sm8350-qmp-ufs-phy"; - reg = <0 0x01d87000 0 0x1c4>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - clock-names = "ref", - "ref_aux"; - clocks = <&rpmhcc RPMH_CXO_CLK>, - <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; - - resets = <&ufs_mem_hc 0>; - reset-names = "ufsphy"; - status = "disabled"; - - ufs_mem_phy_lanes: phy@1d87400 { - reg = <0 0x01d87400 0 0x188>, - <0 0x01d87600 0 0x200>, - <0 0x01d87c00 0 0x200>, - <0 0x01d87800 0 0x188>, - <0 0x01d87a00 0 0x200>; - #phy-cells = <0>; - }; - }; - - slpi: remoteproc@5c00000 { - compatible = "qcom,sm8350-slpi-pas"; - reg = <0 0x05c00000 0 0x4000>; - - interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>, - <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>, - <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>, - <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>, - <&smp2p_slpi_in 3 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", "fatal", "ready", - "handover", "stop-ack"; - - clocks = <&rpmhcc RPMH_CXO_CLK>; - clock-names = "xo"; - - power-domains = <&rpmhpd SM8350_LCX>, - <&rpmhpd SM8350_LMX>; - power-domain-names = "lcx", "lmx"; - - memory-region = <&pil_slpi_mem>; - - qcom,qmp = <&aoss_qmp>; - - qcom,smem-states = <&smp2p_slpi_out 0>; - qcom,smem-state-names = "stop"; - - status = "disabled"; - - glink-edge { - interrupts-extended = <&ipcc IPCC_CLIENT_SLPI - IPCC_MPROC_SIGNAL_GLINK_QMP - IRQ_TYPE_EDGE_RISING>; - mboxes = <&ipcc IPCC_CLIENT_SLPI - IPCC_MPROC_SIGNAL_GLINK_QMP>; - - label = "slpi"; - qcom,remote-pid = <3>; - - fastrpc { - compatible = "qcom,fastrpc"; - qcom,glink-channels = "fastrpcglink-apps-dsp"; - label = "sdsp"; - qcom,non-secure-domain; - #address-cells = <1>; - #size-cells = <0>; - - compute-cb@1 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <1>; - iommus = <&apps_smmu 0x0541 0x0>; - }; - - compute-cb@2 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <2>; - iommus = <&apps_smmu 0x0542 0x0>; - }; - - compute-cb@3 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <3>; - iommus = <&apps_smmu 0x0543 0x0>; - /* note: shared-cb = <4> in downstream */ - }; - }; - }; - }; - cdsp: remoteproc@98900000 { compatible = "qcom,sm8350-cdsp-pas"; reg = <0 0x98900000 0 0x1400000>; @@ -2279,7 +3261,7 @@ <&rpmhpd SM8350_MXC>; power-domain-names = "cx", "mxc"; - interconnects = <&compute_noc MASTER_CDSP_PROC &mc_virt SLAVE_EBI1>; + interconnects = <&compute_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>; memory-region = <&pil_cdsp_mem>; @@ -2368,344 +3350,6 @@ }; }; }; - - sdhc_2: sdhci@8804000 { - compatible = "qcom,sm8350-sdhci", "qcom,sdhci-msm-v5"; - reg = <0 0x08804000 0 0x1000>; - - interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hc_irq", "pwr_irq"; - - clocks = <&gcc GCC_SDCC2_AHB_CLK>, - <&gcc GCC_SDCC2_APPS_CLK>, - <&rpmhcc RPMH_CXO_CLK>; - clock-names = "iface", "core", "xo"; - resets = <&gcc GCC_SDCC2_BCR>; - interconnects = <&aggre2_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>, - <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>; - interconnect-names = "sdhc-ddr","cpu-sdhc"; - iommus = <&apps_smmu 0x4a0 0x0>; - power-domains = <&rpmhpd SM8350_CX>; - operating-points-v2 = <&sdhc2_opp_table>; - bus-width = <4>; - dma-coherent; - - status = "disabled"; - - sdhc2_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - required-opps = <&rpmhpd_opp_low_svs>; - }; - - opp-202000000 { - opp-hz = /bits/ 64 <202000000>; - required-opps = <&rpmhpd_opp_svs_l1>; - }; - }; - }; - - usb_1_hsphy: phy@88e3000 { - compatible = "qcom,sm8350-usb-hs-phy", - "qcom,usb-snps-hs-7nm-phy"; - reg = <0 0x088e3000 0 0x400>; - status = "disabled"; - #phy-cells = <0>; - - clocks = <&rpmhcc RPMH_CXO_CLK>; - clock-names = "ref"; - - resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; - }; - - usb_2_hsphy: phy@88e4000 { - compatible = "qcom,sm8250-usb-hs-phy", - "qcom,usb-snps-hs-7nm-phy"; - reg = <0 0x088e4000 0 0x400>; - status = "disabled"; - #phy-cells = <0>; - - clocks = <&rpmhcc RPMH_CXO_CLK>; - clock-names = "ref"; - - resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; - }; - - usb_1_qmpphy: phy-wrapper@88e9000 { - compatible = "qcom,sm8350-qmp-usb3-phy"; - reg = <0 0x088e9000 0 0x200>, - <0 0x088e8000 0 0x20>; - status = "disabled"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, - <&rpmhcc RPMH_CXO_CLK>, - <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; - clock-names = "aux", "ref_clk_src", "com_aux"; - - resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, - <&gcc GCC_USB3_PHY_PRIM_BCR>; - reset-names = "phy", "common"; - - usb_1_ssphy: phy@88e9200 { - reg = <0 0x088e9200 0 0x200>, - <0 0x088e9400 0 0x200>, - <0 0x088e9c00 0 0x400>, - <0 0x088e9600 0 0x200>, - <0 0x088e9800 0 0x200>, - <0 0x088e9a00 0 0x100>; - #phy-cells = <0>; - #clock-cells = <0>; - clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3_phy_pipe_clk_src"; - }; - }; - - usb_2_qmpphy: phy-wrapper@88eb000 { - compatible = "qcom,sm8350-qmp-usb3-uni-phy"; - reg = <0 0x088eb000 0 0x200>; - status = "disabled"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, - <&rpmhcc RPMH_CXO_CLK>, - <&gcc GCC_USB3_SEC_CLKREF_EN>, - <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>; - clock-names = "aux", "ref_clk_src", "ref", "com_aux"; - - resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>, - <&gcc GCC_USB3_PHY_SEC_BCR>; - reset-names = "phy", "common"; - - usb_2_ssphy: phy@88ebe00 { - reg = <0 0x088ebe00 0 0x200>, - <0 0x088ec000 0 0x200>, - <0 0x088eb200 0 0x1100>; - #phy-cells = <0>; - #clock-cells = <0>; - clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3_uni_phy_pipe_clk_src"; - }; - }; - - dc_noc: interconnect@90c0000 { - compatible = "qcom,sm8350-dc-noc"; - reg = <0 0x090c0000 0 0x4200>; - #interconnect-cells = <1>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - - gem_noc: interconnect@9100000 { - compatible = "qcom,sm8350-gem-noc"; - reg = <0 0x09100000 0 0xb4000>; - #interconnect-cells = <1>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - - system-cache-controller@9200000 { - compatible = "qcom,sm8350-llcc"; - reg = <0 0x09200000 0 0x1d0000>, <0 0x09600000 0 0x50000>; - reg-names = "llcc_base", "llcc_broadcast_base"; - }; - - usb_1: usb@a6f8800 { - compatible = "qcom,sm8350-dwc3", "qcom,dwc3"; - reg = <0 0x0a6f8800 0 0x400>; - status = "disabled"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, - <&gcc GCC_USB30_PRIM_MASTER_CLK>, - <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, - <&gcc GCC_USB30_PRIM_SLEEP_CLK>, - <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>; - clock-names = "cfg_noc", - "core", - "iface", - "sleep", - "mock_utmi"; - - assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, - <&gcc GCC_USB30_PRIM_MASTER_CLK>; - assigned-clock-rates = <19200000>, <200000000>; - - interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 17 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 15 IRQ_TYPE_EDGE_BOTH>, - <&pdc 14 IRQ_TYPE_EDGE_BOTH>; - interrupt-names = "hs_phy_irq", - "ss_phy_irq", - "dm_hs_phy_irq", - "dp_hs_phy_irq"; - - power-domains = <&gcc USB30_PRIM_GDSC>; - - resets = <&gcc GCC_USB30_PRIM_BCR>; - - usb_1_dwc3: usb@a600000 { - compatible = "snps,dwc3"; - reg = <0 0x0a600000 0 0xcd00>; - interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; - iommus = <&apps_smmu 0x0 0x0>; - snps,dis_u2_susphy_quirk; - snps,dis_enblslpm_quirk; - phys = <&usb_1_hsphy>, <&usb_1_ssphy>; - phy-names = "usb2-phy", "usb3-phy"; - }; - }; - - usb_2: usb@a8f8800 { - compatible = "qcom,sm8350-dwc3", "qcom,dwc3"; - reg = <0 0x0a8f8800 0 0x400>; - status = "disabled"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>, - <&gcc GCC_USB30_SEC_MASTER_CLK>, - <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>, - <&gcc GCC_USB30_SEC_SLEEP_CLK>, - <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, - <&gcc GCC_USB3_SEC_CLKREF_EN>; - clock-names = "cfg_noc", - "core", - "iface", - "sleep", - "mock_utmi", - "xo"; - - assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, - <&gcc GCC_USB30_SEC_MASTER_CLK>; - assigned-clock-rates = <19200000>, <200000000>; - - interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 16 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 13 IRQ_TYPE_EDGE_BOTH>, - <&pdc 12 IRQ_TYPE_EDGE_BOTH>; - interrupt-names = "hs_phy_irq", - "ss_phy_irq", - "dm_hs_phy_irq", - "dp_hs_phy_irq"; - - power-domains = <&gcc USB30_SEC_GDSC>; - - resets = <&gcc GCC_USB30_SEC_BCR>; - - usb_2_dwc3: usb@a800000 { - compatible = "snps,dwc3"; - reg = <0 0x0a800000 0 0xcd00>; - interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; - iommus = <&apps_smmu 0x20 0x0>; - snps,dis_u2_susphy_quirk; - snps,dis_enblslpm_quirk; - phys = <&usb_2_hsphy>, <&usb_2_ssphy>; - phy-names = "usb2-phy", "usb3-phy"; - }; - }; - - dispcc: clock-controller@af00000 { - compatible = "qcom,sm8350-dispcc"; - reg = <0 0x0af00000 0 0x10000>; - clocks = <&rpmhcc RPMH_CXO_CLK>, - <0>, - <0>, - <0>, - <0>, - <0>, - <0>; - clock-names = "bi_tcxo", - "dsi0_phy_pll_out_byteclk", - "dsi0_phy_pll_out_dsiclk", - "dsi1_phy_pll_out_byteclk", - "dsi1_phy_pll_out_dsiclk", - "dp_phy_pll_link_clk", - "dp_phy_pll_vco_div_clk"; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - - power-domains = <&rpmhpd SM8350_MMCX>; - power-domain-names = "mmcx"; - }; - - adsp: remoteproc@17300000 { - compatible = "qcom,sm8350-adsp-pas"; - reg = <0 0x17300000 0 0x100>; - - interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>, - <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, - <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, - <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, - <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", "fatal", "ready", - "handover", "stop-ack"; - - clocks = <&rpmhcc RPMH_CXO_CLK>; - clock-names = "xo"; - - power-domains = <&rpmhpd SM8350_LCX>, - <&rpmhpd SM8350_LMX>; - power-domain-names = "lcx", "lmx"; - - memory-region = <&pil_adsp_mem>; - - qcom,qmp = <&aoss_qmp>; - - qcom,smem-states = <&smp2p_adsp_out 0>; - qcom,smem-state-names = "stop"; - - status = "disabled"; - - glink-edge { - interrupts-extended = <&ipcc IPCC_CLIENT_LPASS - IPCC_MPROC_SIGNAL_GLINK_QMP - IRQ_TYPE_EDGE_RISING>; - mboxes = <&ipcc IPCC_CLIENT_LPASS - IPCC_MPROC_SIGNAL_GLINK_QMP>; - - label = "lpass"; - qcom,remote-pid = <2>; - - fastrpc { - compatible = "qcom,fastrpc"; - qcom,glink-channels = "fastrpcglink-apps-dsp"; - label = "adsp"; - qcom,non-secure-domain; - #address-cells = <1>; - #size-cells = <0>; - - compute-cb@3 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <3>; - iommus = <&apps_smmu 0x1803 0x0>; - }; - - compute-cb@4 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <4>; - iommus = <&apps_smmu 0x1804 0x0>; - }; - - compute-cb@5 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <5>; - iommus = <&apps_smmu 0x1805 0x0>; - }; - }; - }; - }; }; thermal_zones: thermal-zones { @@ -2728,7 +3372,7 @@ type = "passive"; }; - cpu0_crit: cpu_crit { + cpu0_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -2772,7 +3416,7 @@ type = "passive"; }; - cpu1_crit: cpu_crit { + cpu1_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -2816,7 +3460,7 @@ type = "passive"; }; - cpu2_crit: cpu_crit { + cpu2_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -2860,7 +3504,7 @@ type = "passive"; }; - cpu3_crit: cpu_crit { + cpu3_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -2904,7 +3548,7 @@ type = "passive"; }; - cpu4_top_crit: cpu_crit { + cpu4_top_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -2948,7 +3592,7 @@ type = "passive"; }; - cpu5_top_crit: cpu_crit { + cpu5_top_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -2992,7 +3636,7 @@ type = "passive"; }; - cpu6_top_crit: cpu_crit { + cpu6_top_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -3036,7 +3680,7 @@ type = "passive"; }; - cpu7_top_crit: cpu_crit { + cpu7_top_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -3080,7 +3724,7 @@ type = "passive"; }; - cpu4_bottom_crit: cpu_crit { + cpu4_bottom_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -3124,7 +3768,7 @@ type = "passive"; }; - cpu5_bottom_crit: cpu_crit { + cpu5_bottom_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -3168,7 +3812,7 @@ type = "passive"; }; - cpu6_bottom_crit: cpu_crit { + cpu6_bottom_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -3212,7 +3856,7 @@ type = "passive"; }; - cpu7_bottom_crit: cpu_crit { + cpu7_bottom_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; diff --git a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts index 4de3e1f1c39c..feef3837e4cd 100644 --- a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts @@ -8,6 +8,13 @@ #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h> #include "sm8450.dtsi" +#include "pm8350.dtsi" +#include "pm8350b.dtsi" +#include "pm8350c.dtsi" +#include "pm8450.dtsi" +#include "pmk8350.dtsi" +#include "pmr735a.dtsi" +#include "pmr735b.dtsi" / { model = "Qualcomm Technologies, Inc. SM8450 HDK"; @@ -17,10 +24,69 @@ serial0 = &uart7; }; + wcd938x: audio-codec { + compatible = "qcom,wcd9380-codec"; + + pinctrl-names = "default"; + pinctrl-0 = <&wcd_default>; + + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + qcom,rx-device = <&wcd_rx>; + qcom,tx-device = <&wcd_tx>; + + reset-gpios = <&tlmm 43 GPIO_ACTIVE_LOW>; + + vdd-buck-supply = <&vreg_s10b_1p8>; + vdd-rxtx-supply = <&vreg_s10b_1p8>; + vdd-io-supply = <&vreg_s10b_1p8>; + vdd-mic-bias-supply = <&vreg_bob>; + + #sound-dai-cells = <1>; + }; + chosen { stdout-path = "serial0:115200n8"; }; + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_out: endpoint { + remote-endpoint = <<9611_out>; + }; + }; + }; + + lt9611_1v2: lt9611-vdd12-regulator { + compatible = "regulator-fixed"; + regulator-name = "LT9611_1V2"; + + vin-supply = <&vph_pwr>; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + gpio = <&tlmm 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + lt9611_3v3: lt9611-3v3-regulator { + compatible = "regulator-fixed"; + regulator-name = "LT9611_3V3"; + + vin-supply = <&vreg_bob>; + gpio = <&tlmm 109 GPIO_ACTIVE_HIGH>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + }; + vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; regulator-name = "vph_pwr"; @@ -33,7 +99,7 @@ }; &apps_rsc { - pm8350-rpmh-regulators { + regulators-0 { compatible = "qcom,pm8350-rpmh-regulators"; qcom,pmic-id = "b"; @@ -124,7 +190,7 @@ }; }; - pm8350c-rpmh-regulators { + regulators-1 { compatible = "qcom,pm8350c-rpmh-regulators"; qcom,pmic-id = "c"; @@ -237,7 +303,7 @@ }; }; - pm8450-rpmh-regulators { + regulators-2 { compatible = "qcom,pm8450-rpmh-regulators"; qcom,pmic-id = "h"; @@ -280,7 +346,7 @@ }; - pmr735a-rpmh-regulators { + regulators-3 { compatible = "qcom,pmr735a-rpmh-regulators"; qcom,pmic-id = "e"; @@ -350,6 +416,74 @@ }; }; +&dispcc { + status = "okay"; +}; + +&i2c9 { + clock-frequency = <400000>; + status = "okay"; + + lt9611_codec: hdmi-bridge@2b { + compatible = "lontium,lt9611uxc"; + reg = <0x2b>; + + interrupts-extended = <&tlmm 44 IRQ_TYPE_EDGE_FALLING>; + + reset-gpios = <&tlmm 107 GPIO_ACTIVE_HIGH>; + + vdd-supply = <<9611_1v2>; + vcc-supply = <<9611_3v3>; + + pinctrl-names = "default"; + pinctrl-0 = <<9611_irq_pin <9611_rst_pin>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lt9611_a: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + + port@2 { + reg = <2>; + + lt9611_out: endpoint { + remote-endpoint = <&hdmi_connector_out>; + }; + }; + }; + }; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { + vdda-supply = <&vreg_l6b_1p2>; + status = "okay"; +}; + +&mdss_dsi0_out { + remote-endpoint = <<9611_a>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + vdds-supply = <&vreg_l5b_0p88>; + status = "okay"; +}; + +&mdss_mdp { + status = "okay"; +}; + &pcie0 { status = "okay"; max-link-speed = <2>; @@ -395,6 +529,10 @@ status = "okay"; }; +&qupv3_id_1 { + status = "okay"; +}; + &sdhc_2 { cd-gpios = <&tlmm 92 GPIO_ACTIVE_HIGH>; pinctrl-names = "default", "sleep"; @@ -407,33 +545,6 @@ status = "okay"; }; -&soc { - wcd938x: codec { - compatible = "qcom,wcd9380-codec"; - - pinctrl-names = "default"; - pinctrl-0 = <&wcd_default>; - - qcom,micbias1-microvolt = <1800000>; - qcom,micbias2-microvolt = <1800000>; - qcom,micbias3-microvolt = <1800000>; - qcom,micbias4-microvolt = <1800000>; - qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; - qcom,mbhc-headset-vthreshold-microvolt = <1700000>; - qcom,mbhc-headphone-vthreshold-microvolt = <50000>; - qcom,rx-device = <&wcd_rx>; - qcom,tx-device = <&wcd_tx>; - - reset-gpios = <&tlmm 43 GPIO_ACTIVE_LOW>; - #sound-dai-cells = <1>; - - vdd-buck-supply = <&vreg_s10b_1p8>; - vdd-rxtx-supply = <&vreg_s10b_1p8>; - vdd-io-supply = <&vreg_s10b_1p8>; - vdd-mic-bias-supply = <&vreg_bob>; - }; -}; - &sound { compatible = "qcom,sm8450-sndcard"; model = "SM8450-HDK"; @@ -516,6 +627,8 @@ }; &swr0 { + status = "okay"; + left_spkr: speaker@0,1 { compatible = "sdw10217020200"; reg = <0 1>; @@ -564,6 +677,18 @@ &tlmm { gpio-reserved-ranges = <28 4>, <36 4>; + lt9611_irq_pin: lt9611-irq-state { + pins = "gpio44"; + function = "gpio"; + bias-disable; + }; + + lt9611_rst_pin: lt9611-rst-state { + pins = "gpio107"; + function = "gpio"; + output-high; + }; + sdc2_card_det_n: sd-card-det-n-state { pins = "gpio92"; function = "gpio"; @@ -622,6 +747,8 @@ pinctrl-names = "default"; vdd-micb-supply = <&vreg_s10b_1p8>; qcom,dmic-sample-rate = <600000>; + + status = "okay"; }; &tlmm { diff --git a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts index ee62514fff68..f7592946c783 100644 --- a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts +++ b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts @@ -7,6 +7,13 @@ #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "sm8450.dtsi" +#include "pm8350.dtsi" +#include "pm8350b.dtsi" +#include "pm8350c.dtsi" +#include "pm8450.dtsi" +#include "pmk8350.dtsi" +#include "pmr735a.dtsi" +#include "pmr735b.dtsi" / { model = "Qualcomm Technologies, Inc. SM8450 QRD"; @@ -32,7 +39,7 @@ }; &apps_rsc { - pm8350-rpmh-regulators { + regulators-0 { compatible = "qcom,pm8350-rpmh-regulators"; qcom,pmic-id = "b"; @@ -123,7 +130,7 @@ }; }; - pm8350c-rpmh-regulators { + regulators-1 { compatible = "qcom,pm8350c-rpmh-regulators"; qcom,pmic-id = "c"; @@ -235,7 +242,7 @@ }; }; - pm8450-rpmh-regulators { + regulators-2 { compatible = "qcom,pm8450-rpmh-regulators"; qcom,pmic-id = "h"; @@ -278,7 +285,7 @@ }; - pmr735a-rpmh-regulators { + regulators-3 { compatible = "qcom,pmr735a-rpmh-regulators"; qcom,pmic-id = "e"; diff --git a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts index b83500316a81..daf2f91f356e 100644 --- a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts +++ b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts @@ -11,6 +11,67 @@ / { model = "Sony Xperia 1 IV"; compatible = "sony,pdx223", "qcom,sm8450"; + + imx316_lvdd_regulator: imx316-lvdd-regulator { + compatible = "regulator-fixed"; + regulator-name = "imx316_lvdd_regulator"; + gpio = <&pm8350b_gpios 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&cam_pwr_ld_en>; + }; + + tcs3490_vdd_regulator: rgbcir-vdd-regulator { + compatible = "regulator-fixed"; + regulator-name = "tcs3490_vdd_regulator"; + gpio = <&pm8350c_gpios 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&rgbc_ir_pwr_en>; + }; +}; + +&pm8350b_gpios { + gpio-line-names = "CAM_PWR_A_CS", /* GPIO_1 */ + "NC", + "NC", + "NC", + "SNAPSHOT_N", + "CAM_PWR_LD_EN", + "NC", + "FOCUS_N"; + + cam_pwr_ld_en: cam-pwr-ld-en-state { + pins = "gpio6"; + function = "normal"; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + power-source = <0>; + drive-push-pull; + output-low; + }; +}; + +&pm8350c_gpios { + gpio-line-names = "FL_STROBE_TRIG_WIDE", /* GPIO_1 */ + "FL_STROBE_TRIG_TELE", + "WLC_ID", + "WLC_TXPWR_EN", + "NC", + "RGBC_IR_PWR_EN", + "NC", + "NC", + "WIDEC_PWR_EN"; + + rgbc_ir_pwr_en: rgbc-ir-pwr-en-state { + pins = "gpio6"; + function = "normal"; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + power-source = <1>; + drive-push-pull; + output-low; + }; }; &tlmm { diff --git a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx224.dts b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx224.dts index 13c2fc4bccfc..dc4de2d3fe48 100644 --- a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx224.dts +++ b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx224.dts @@ -12,14 +12,40 @@ model = "Sony Xperia 5 IV"; compatible = "sony,pdx224", "qcom,sm8450"; - imx563_vdig_vreg: imx563-vdig-regulator { + imx563_vdig_regulator: imx563-vdig-regulator { compatible = "regulator-fixed"; - regulator-name = "imx563_vdig_vreg"; + regulator-name = "imx563_vdig_regulator"; gpio = <&tlmm 22 GPIO_ACTIVE_HIGH>; enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&uwidec_pwr_en>; }; }; +&pm8350b_gpios { + gpio-line-names = "CAM_PWR_A_CS", /* GPIO_1 */ + "NC", + "NC", + "NC", + "SNAPSHOT_N", + "NC", + "NC", + "FOCUS_N"; +}; + +&pm8350c_gpios { + gpio-line-names = "FL_STROBE_TRIG_WIDE", /* GPIO_1 */ + "FL_STROBE_TRIG_TELE", + "WLC_ID", + "WLC_TXPWR_EN", + "NC", + "NC", /* RGBCIR uses a PMIC vreg, so it's most likely NC. */ + "NC", + "NC", + "WIDEC_PWR_EN"; +}; + &tlmm { gpio-line-names = "TELE_SPI_MISO", /* GPIO_0 */ "TELE_SPI_MOSI", /* SONY says NC, but it only makes sense this way.. */ @@ -231,4 +257,12 @@ "APPS_I2C_0_SCL", "CCI_I2C3_SDA", "CCI_I2C3_SCL"; + + uwidec_pwr_en: uwidec-pwr-en-state { + pins = "gpio22"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; }; diff --git a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi index 38256226d229..67538b5a557e 100644 --- a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi @@ -3,8 +3,15 @@ * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org> */ +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "sm8450.dtsi" +#include "pm8350.dtsi" +#include "pm8350b.dtsi" +#include "pm8350c.dtsi" +#include "pm8450.dtsi" +#include "pmk8350.dtsi" +#include "pmr735a.dtsi" /delete-node/ &adsp_mem; /delete-node/ &rmtfs_mem; @@ -21,6 +28,41 @@ stdout-path = "serial0:115200n8"; }; + gpio-keys { + compatible = "gpio-keys"; + label = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&focus_n &snapshot_n &vol_down_n>; + + key-camera-focus { + label = "Camera Focus"; + linux,code = <KEY_CAMERA_FOCUS>; + gpios = <&pm8350b_gpios 8 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + + key-camera-snapshot { + label = "Camera Snapshot"; + linux,code = <KEY_CAMERA>; + gpios = <&pm8350b_gpios 5 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + + key-volume-down { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + gpios = <&pm8350_gpios 6 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + }; + reserved-memory { adsp_mem: memory@85700000 { reg = <0x0 0x85700000 0x0 0x2800000>; @@ -52,11 +94,14 @@ }; /* Sadly, the voltages for these GPIO regulators are unknown. */ - imx650_vana_vreg: imx650-vana-regulator { + imx650_vana_regulator: imx650-vana-regulator { compatible = "regulator-fixed"; - regulator-name = "imx650_vana_vreg"; + regulator-name = "imx650_vana_regulator"; gpio = <&tlmm 23 GPIO_ACTIVE_HIGH>; enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&telec_pwr_en>; }; vph_pwr: vph-pwr-regulator { @@ -71,7 +116,7 @@ }; &apps_rsc { - pm8350-rpmh-regulators { + regulators-0 { compatible = "qcom,pm8350-rpmh-regulators"; qcom,pmic-id = "b"; @@ -167,7 +212,7 @@ }; }; - pm8350c-rpmh-regulators { + regulators-1 { compatible = "qcom,pm8350c-rpmh-regulators"; qcom,pmic-id = "c"; @@ -303,7 +348,7 @@ }; }; - pm8450-rpmh-regulators { + regulators-2 { compatible = "qcom,pm8450-rpmh-regulators"; qcom,pmic-id = "h"; @@ -347,7 +392,7 @@ }; }; - pmr735a-rpmh-regulators { + regulators-3 { compatible = "qcom,pmr735a-rpmh-regulators"; qcom,pmic-id = "e"; @@ -456,7 +501,58 @@ clock-frequency = <400000>; status = "okay"; - /* Dialog SLG51000 CMIC @ 75 */ + pmic@75 { + compatible = "dlg,slg51000"; + reg = <0x75>; + dlg,cs-gpios = <&pm8350b_gpios 1 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&cam_pwr_a_cs>; + + regulators { + slg51000_a_ldo1: ldo1 { + regulator-name = "slg51000_a_ldo1"; + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3300000>; + }; + + slg51000_a_ldo2: ldo2 { + regulator-name = "slg51000_a_ldo2"; + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3300000>; + }; + + slg51000_a_ldo3: ldo3 { + regulator-name = "slg51000_a_ldo3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3750000>; + }; + + slg51000_a_ldo4: ldo4 { + regulator-name = "slg51000_a_ldo4"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3750000>; + }; + + slg51000_a_ldo5: ldo5 { + regulator-name = "slg51000_a_ldo5"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1200000>; + }; + + slg51000_a_ldo6: ldo6 { + regulator-name = "slg51000_a_ldo6"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1200000>; + }; + + slg51000_a_ldo7: ldo7 { + regulator-name = "slg51000_a_ldo7"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3750000>; + }; + }; + }; }; &i2c9 { @@ -466,13 +562,6 @@ /* NXP SN1X0 NFC @ 28 */ }; -&i2c13 { - clock-frequency = <400000>; - status = "okay"; - - /* Richwave RTC6226 FM Radio Receiver @ 64 */ -}; - &i2c14 { clock-frequency = <1000000>; status = "okay"; @@ -533,18 +622,89 @@ status = "okay"; }; +&pm8350_gpios { + gpio-line-names = "ASSIGN1_THERM", /* GPIO_1 */ + "LCD_ID", + "SDR_MMW_THERM", + "RF_ID", + "NC", + "VOL_DOWN_N", + "NC", + "NC", + "NC", + "PM8350_OPTION"; /* GPIO_10 */ + + vol_down_n: vol-down-n-state { + pins = "gpio6"; + function = "normal"; + power-source = <1>; + bias-pull-up; + input-enable; + }; +}; + +&pm8350b_gpios { + cam_pwr_a_cs: cam-pwr-a-cs-state { + pins = "gpio1"; + function = "normal"; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + power-source = <1>; + drive-push-pull; + output-high; + }; + + snapshot_n: snapshot-n-state { + pins = "gpio5"; + function = "normal"; + power-source = <0>; + bias-pull-up; + input-enable; + }; + + focus_n: focus-n-state { + pins = "gpio8"; + function = "normal"; + power-source = <0>; + bias-pull-up; + input-enable; + }; +}; + +&pm8450_gpios { + gpio-line-names = "FP_LDO_EN", /* GPIO_1 */ + "", + "", + ""; +}; + +&pmk8350_gpios { + gpio-line-names = "NC", /* GPIO_1 */ + "NC", + "DISP_THERM", + "PMK8350_OPTION"; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + linux,code = <KEY_VOLUMEUP>; + status = "okay"; +}; + &remoteproc_adsp { - firmware-name = "qcom/sm8350/Sony/nagara/adsp.mbn"; + firmware-name = "qcom/sm8450/Sony/nagara/adsp.mbn"; status = "okay"; }; &remoteproc_cdsp { - firmware-name = "qcom/sm8350/Sony/nagara/cdsp.mbn"; + firmware-name = "qcom/sm8450/Sony/nagara/cdsp.mbn"; status = "okay"; }; &remoteproc_slpi { - firmware-name = "qcom/sm8350/Sony/nagara/slpi.mbn"; + firmware-name = "qcom/sm8450/Sony/nagara/slpi.mbn"; status = "okay"; }; @@ -597,6 +757,14 @@ input-enable; }; + telec_pwr_en: telec-pwr-en-state { + pins = "gpio23"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; + sdc2_card_det_n: sd-card-det-n-state { pins = "gpio92"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi index 570475040d95..1a744a33bcf4 100644 --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi @@ -57,9 +57,11 @@ clocks = <&cpufreq_hw 0>; L2_0: l2-cache { compatible = "cache"; + cache-level = <2>; next-level-cache = <&L3_0>; L3_0: l3-cache { compatible = "cache"; + cache-level = <3>; }; }; }; @@ -77,6 +79,7 @@ clocks = <&cpufreq_hw 0>; L2_100: l2-cache { compatible = "cache"; + cache-level = <2>; next-level-cache = <&L3_0>; }; }; @@ -94,6 +97,7 @@ clocks = <&cpufreq_hw 0>; L2_200: l2-cache { compatible = "cache"; + cache-level = <2>; next-level-cache = <&L3_0>; }; }; @@ -111,6 +115,7 @@ clocks = <&cpufreq_hw 0>; L2_300: l2-cache { compatible = "cache"; + cache-level = <2>; next-level-cache = <&L3_0>; }; }; @@ -128,6 +133,7 @@ clocks = <&cpufreq_hw 1>; L2_400: l2-cache { compatible = "cache"; + cache-level = <2>; next-level-cache = <&L3_0>; }; }; @@ -145,6 +151,7 @@ clocks = <&cpufreq_hw 1>; L2_500: l2-cache { compatible = "cache"; + cache-level = <2>; next-level-cache = <&L3_0>; }; @@ -163,6 +170,7 @@ clocks = <&cpufreq_hw 1>; L2_600: l2-cache { compatible = "cache"; + cache-level = <2>; next-level-cache = <&L3_0>; }; }; @@ -180,6 +188,7 @@ clocks = <&cpufreq_hw 2>; L2_700: l2-cache { compatible = "cache"; + cache-level = <2>; next-level-cache = <&L3_0>; }; }; @@ -270,6 +279,7 @@ firmware { scm: scm { compatible = "qcom,scm-sm8450", "qcom,scm"; + qcom,dload-mode = <&tcsr 0x13000>; interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>; #reset-cells = <1>; }; @@ -302,55 +312,55 @@ compatible = "arm,psci-1.0"; method = "smc"; - CPU_PD0: cpu0 { + CPU_PD0: power-domain-cpu0 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&LITTLE_CPU_SLEEP_0>; }; - CPU_PD1: cpu1 { + CPU_PD1: power-domain-cpu1 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&LITTLE_CPU_SLEEP_0>; }; - CPU_PD2: cpu2 { + CPU_PD2: power-domain-cpu2 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&LITTLE_CPU_SLEEP_0>; }; - CPU_PD3: cpu3 { + CPU_PD3: power-domain-cpu3 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&LITTLE_CPU_SLEEP_0>; }; - CPU_PD4: cpu4 { + CPU_PD4: power-domain-cpu4 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&BIG_CPU_SLEEP_0>; }; - CPU_PD5: cpu5 { + CPU_PD5: power-domain-cpu5 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&BIG_CPU_SLEEP_0>; }; - CPU_PD6: cpu6 { + CPU_PD6: power-domain-cpu6 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&BIG_CPU_SLEEP_0>; }; - CPU_PD7: cpu7 { + CPU_PD7: power-domain-cpu7 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&BIG_CPU_SLEEP_0>; }; - CLUSTER_PD: cpu-cluster0 { + CLUSTER_PD: power-domain-cpu-cluster0 { #power-domain-cells = <0>; domain-idle-states = <&CLUSTER_SLEEP_0>, <&CLUSTER_SLEEP_1>; }; @@ -731,19 +741,29 @@ #reset-cells = <1>; #power-domain-cells = <1>; clocks = <&rpmhcc RPMH_CXO_CLK>, + <&sleep_clk>, <&pcie0_lane>, <&pcie1_lane>, - <&sleep_clk>; + <0>, + <&ufs_mem_phy_lanes 0>, + <&ufs_mem_phy_lanes 1>, + <&ufs_mem_phy_lanes 2>, + <0>; clock-names = "bi_tcxo", + "sleep_clk", "pcie_0_pipe_clk", "pcie_1_pipe_clk", - "sleep_clk"; + "pcie_1_phy_aux_clk", + "ufs_phy_rx_symbol_0_clk", + "ufs_phy_rx_symbol_1_clk", + "ufs_phy_tx_symbol_0_clk", + "usb3_phy_wrapper_gcc_usb30_pipe_clk"; }; gpi_dma2: dma-controller@800000 { compatible = "qcom,sm8450-gpi-dma", "qcom,sm6350-gpi-dma"; #dma-cells = <3>; - reg = <0 0x800000 0 0x60000>; + reg = <0 0x00800000 0 0x60000>; interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>, @@ -997,8 +1017,6 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart20_default>; interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; status = "disabled"; }; @@ -1064,7 +1082,7 @@ gpi_dma0: dma-controller@900000 { compatible = "qcom,sm8450-gpi-dma", "qcom,sm6350-gpi-dma"; #dma-cells = <3>; - reg = <0 0x900000 0 0x60000>; + reg = <0 0x00900000 0 0x60000>; interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>, @@ -1345,7 +1363,7 @@ i2c6: i2c@998000 { compatible = "qcom,geni-i2c"; - reg = <0x0 0x998000 0x0 0x4000>; + reg = <0x0 0x00998000 0x0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; pinctrl-names = "default"; @@ -1365,7 +1383,7 @@ spi6: spi@998000 { compatible = "qcom,geni-spi"; - reg = <0x0 0x998000 0x0 0x4000>; + reg = <0x0 0x00998000 0x0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; @@ -1391,8 +1409,6 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>; interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; status = "disabled"; }; }; @@ -1400,7 +1416,7 @@ gpi_dma1: dma-controller@a00000 { compatible = "qcom,sm8450-gpi-dma", "qcom,sm6350-gpi-dma"; #dma-cells = <3>; - reg = <0 0xa00000 0 0x60000>; + reg = <0 0x00a00000 0 0x60000>; interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>, @@ -1733,6 +1749,13 @@ ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>, <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0x3d00000>; + /* + * MSIs for BDF (1:0.0) only works with Device ID 0x5980. + * Hence, the IDs are swapped. + */ + msi-map = <0x0 &gic_its 0x5981 0x1>, + <0x100 &gic_its 0x5980 0x1>; + msi-map-mask = <0xff00>; interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; #interrupt-cells = <1>; @@ -1810,10 +1833,10 @@ status = "disabled"; pcie0_lane: phy@1c06200 { - reg = <0 0x1c06e00 0 0x200>, /* tx */ - <0 0x1c07000 0 0x200>, /* rx */ - <0 0x1c06200 0 0x200>, /* pcs */ - <0 0x1c06600 0 0x200>; /* pcs_pcie */ + reg = <0 0x01c06e00 0 0x200>, /* tx */ + <0 0x01c07000 0 0x200>, /* rx */ + <0 0x01c06200 0 0x200>, /* pcs */ + <0 0x01c06600 0 0x200>; /* pcs_pcie */ clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; clock-names = "pipe0"; @@ -1842,6 +1865,13 @@ ranges = <0x01000000 0x0 0x40200000 0 0x40200000 0x0 0x100000>, <0x02000000 0x0 0x40300000 0 0x40300000 0x0 0x1fd00000>; + /* + * MSIs for BDF (1:0.0) only works with Device ID 0x5a00. + * Hence, the IDs are swapped. + */ + msi-map = <0x0 &gic_its 0x5a01 0x1>, + <0x100 &gic_its 0x5a00 0x1>; + msi-map-mask = <0xff00>; interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; #interrupt-cells = <1>; @@ -1917,12 +1947,12 @@ status = "disabled"; pcie1_lane: phy@1c0e000 { - reg = <0 0x1c0e000 0 0x200>, /* tx */ - <0 0x1c0e200 0 0x300>, /* rx */ - <0 0x1c0f200 0 0x200>, /* pcs */ - <0 0x1c0e800 0 0x200>, /* tx */ - <0 0x1c0ea00 0 0x300>, /* rx */ - <0 0x1c0f400 0 0xc00>; /* pcs_pcie */ + reg = <0 0x01c0e000 0 0x200>, /* tx */ + <0 0x01c0e200 0 0x300>, /* rx */ + <0 0x01c0f200 0 0x200>, /* pcs */ + <0 0x01c0e800 0 0x200>, /* tx */ + <0 0x01c0ea00 0 0x300>, /* rx */ + <0 0x01c0f400 0 0xc00>; /* pcs_pcie */ clocks = <&gcc GCC_PCIE_1_PIPE_CLK>; clock-names = "pipe0"; @@ -1986,6 +2016,11 @@ #hwlock-cells = <1>; }; + tcsr: syscon@1fc0000 { + compatible = "qcom,sm8450-tcsr", "syscon"; + reg = <0x0 0x1fc0000 0x0 0x30000>; + }; + usb_1_hsphy: phy@88e3000 { compatible = "qcom,sm8450-usb-hs-phy", "qcom,usb-snps-hs-7nm-phy"; @@ -2143,11 +2178,12 @@ #address-cells = <2>; #size-cells = <0>; #sound-dai-cells = <1>; + status = "disabled"; }; rxmacro: codec@3200000 { compatible = "qcom,sm8450-lpass-rx-macro"; - reg = <0 0x3200000 0 0x1000>; + reg = <0 0x03200000 0 0x1000>; clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, @@ -2168,7 +2204,7 @@ swr1: soundwire-controller@3210000 { compatible = "qcom,soundwire-v1.7.0"; - reg = <0 0x3210000 0 0x2000>; + reg = <0 0x03210000 0 0x2000>; interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rxmacro>; clock-names = "iface"; @@ -2189,11 +2225,12 @@ #address-cells = <2>; #size-cells = <0>; #sound-dai-cells = <1>; + status = "disabled"; }; txmacro: codec@3220000 { compatible = "qcom,sm8450-lpass-tx-macro"; - reg = <0 0x3220000 0 0x1000>; + reg = <0 0x03220000 0 0x1000>; clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, @@ -2256,14 +2293,15 @@ #address-cells = <2>; #size-cells = <0>; #sound-dai-cells = <1>; + status = "disabled"; }; swr2: soundwire-controller@33b0000 { compatible = "qcom,soundwire-v1.7.0"; - reg = <0 0x33b0000 0 0x2000>; + reg = <0 0x033b0000 0 0x2000>; interrupts-extended = <&intc GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>, <&intc GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "core", "wake"; + interrupt-names = "core", "wakeup"; clocks = <&vamacro>; clock-names = "iface"; @@ -2284,6 +2322,7 @@ #address-cells = <2>; #size-cells = <0>; #sound-dai-cells = <1>; + status = "disabled"; }; vamacro: codec@33f0000 { @@ -2300,6 +2339,7 @@ #clock-cells = <0>; clock-output-names = "fsgen"; #sound-dai-cells = <1>; + status = "disabled"; }; remoteproc_adsp: remoteproc@30000000 { @@ -2554,8 +2594,8 @@ }; cci0: cci@ac15000 { - compatible = "qcom,sm8450-cci"; - reg = <0 0xac15000 0 0x1000>; + compatible = "qcom,sm8450-cci", "qcom,msm8996-cci"; + reg = <0 0x0ac15000 0 0x1000>; interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>; power-domains = <&camcc TITAN_TOP_GDSC>; @@ -2593,8 +2633,8 @@ }; cci1: cci@ac16000 { - compatible = "qcom,sm8450-cci"; - reg = <0 0xac16000 0 0x1000>; + compatible = "qcom,sm8450-cci", "qcom,msm8996-cci"; + reg = <0 0x0ac16000 0 0x1000>; interrupts = <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>; power-domains = <&camcc TITAN_TOP_GDSC>; @@ -2646,6 +2686,281 @@ status = "disabled"; }; + mdss: display-subsystem@ae00000 { + compatible = "qcom,sm8450-mdss"; + reg = <0 0x0ae00000 0 0x1000>; + reg-names = "mdss"; + + /* same path used twice */ + interconnects = <&mmss_noc MASTER_MDP_DISP 0 &mc_virt SLAVE_EBI1_DISP 0>, + <&mmss_noc MASTER_MDP_DISP 0 &mc_virt SLAVE_EBI1_DISP 0>; + interconnect-names = "mdp0-mem", "mdp1-mem"; + + resets = <&dispcc DISP_CC_MDSS_CORE_BCR>; + + power-domains = <&dispcc MDSS_GDSC>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + iommus = <&apps_smmu 0x2800 0x402>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + mdss_mdp: display-controller@ae01000 { + compatible = "qcom,sm8450-dpu"; + reg = <0 0x0ae01000 0 0x8f000>, + <0 0x0aeb0000 0 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", + "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd SM8450_MMCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf2_out: endpoint { + remote-endpoint = <&mdss_dsi1_in>; + }; + }; + + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-172000000 { + opp-hz = /bits/ 64 <172000000>; + required-opps = <&rpmhpd_opp_low_svs_d1>; + }; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-325000000 { + opp-hz = /bits/ 64 <325000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-375000000 { + opp-hz = /bits/ 64 <375000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss_dsi0: dsi@ae94000 { + compatible = "qcom,sm8450-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0 0x0ae94000 0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; + + operating-points-v2 = <&mdss_dsi_opp_table>; + power-domains = <&rpmhpd SM8450_MMCX>; + + phys = <&mdss_dsi0_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi0_out: endpoint { + }; + }; + }; + + mdss_dsi_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + mdss_dsi0_phy: phy@ae94400 { + compatible = "qcom,sm8450-dsi-phy-5nm"; + reg = <0 0x0ae94400 0 0x200>, + <0 0x0ae94600 0 0x280>, + <0 0x0ae94900 0 0x260>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + + status = "disabled"; + }; + + mdss_dsi1: dsi@ae96000 { + compatible = "qcom,sm8450-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0 0x0ae96000 0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <5>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>, + <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK>, + <&dispcc DISP_CC_MDSS_ESC1_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>; + + operating-points-v2 = <&mdss_dsi_opp_table>; + power-domains = <&rpmhpd SM8450_MMCX>; + + phys = <&mdss_dsi1_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi1_in: endpoint { + remote-endpoint = <&dpu_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi1_out: endpoint { + }; + }; + }; + }; + + mdss_dsi1_phy: phy@ae96400 { + compatible = "qcom,sm8450-dsi-phy-5nm"; + reg = <0 0x0ae96400 0 0x200>, + <0 0x0ae96600 0 0x280>, + <0 0x0ae96900 0 0x260>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + + status = "disabled"; + }; + }; + dispcc: clock-controller@af00000 { compatible = "qcom,sm8450-dispcc"; reg = <0 0x0af00000 0 0x20000>; @@ -2653,10 +2968,10 @@ <&rpmhcc RPMH_CXO_CLK_A>, <&gcc GCC_DISP_AHB_CLK>, <&sleep_clk>, - <0>, /* dsi0 */ - <0>, - <0>, /* dsi1 */ - <0>, + <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>, + <&mdss_dsi1_phy 0>, + <&mdss_dsi1_phy 1>, <0>, /* dp0 */ <0>, <0>, /* dp1 */ @@ -2705,7 +3020,7 @@ #thermal-sensor-cells = <1>; }; - aoss_qmp: power-controller@c300000 { + aoss_qmp: power-management@c300000 { compatible = "qcom,sm8450-aoss-qmp", "qcom,aoss-qmp"; reg = <0 0x0c300000 0 0x400>; interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP @@ -2715,6 +3030,28 @@ #clock-cells = <0>; }; + spmi_bus: spmi@c400000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0 0x0c400000 0 0x00003000>, + <0 0x0c500000 0 0x00400000>, + <0 0x0c440000 0 0x00080000>, + <0 0x0c4c0000 0 0x00010000>, + <0 0x0c42d000 0 0x00010000>; + reg-names = "core", + "chnls", + "obsrvr", + "intr", + "cnfg"; + interrupt-names = "periph_irq"; + interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + interrupt-controller; + #interrupt-cells = <4>; + #address-cells = <2>; + #size-cells = <0>; + }; + ipcc: mailbox@ed18000 { compatible = "qcom,sm8450-ipcc", "qcom,ipcc"; reg = <0 0x0ed18000 0 0x1000>; @@ -3235,10 +3572,10 @@ }; - lpass_tlmm: pinctrl@3440000{ + lpass_tlmm: pinctrl@3440000 { compatible = "qcom,sm8450-lpass-lpi-pinctrl"; - reg = <0 0x3440000 0x0 0x20000>, - <0 0x34d0000 0x0 0x10000>; + reg = <0 0x03440000 0x0 0x20000>, + <0 0x034d0000 0x0 0x10000>; gpio-controller; #gpio-cells = <2>; gpio-ranges = <&lpass_tlmm 0 0 23>; @@ -3580,35 +3917,39 @@ opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; }; - rpmhpd_opp_low_svs: opp3 { + rpmhpd_opp_low_svs_d1: opp3 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>; + }; + + rpmhpd_opp_low_svs: opp4 { opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; }; - rpmhpd_opp_svs: opp4 { + rpmhpd_opp_svs: opp5 { opp-level = <RPMH_REGULATOR_LEVEL_SVS>; }; - rpmhpd_opp_svs_l1: opp5 { + rpmhpd_opp_svs_l1: opp6 { opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; }; - rpmhpd_opp_nom: opp6 { + rpmhpd_opp_nom: opp7 { opp-level = <RPMH_REGULATOR_LEVEL_NOM>; }; - rpmhpd_opp_nom_l1: opp7 { + rpmhpd_opp_nom_l1: opp8 { opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; }; - rpmhpd_opp_nom_l2: opp8 { + rpmhpd_opp_nom_l2: opp9 { opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; }; - rpmhpd_opp_turbo: opp9 { + rpmhpd_opp_turbo: opp10 { opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; }; - rpmhpd_opp_turbo_l1: opp10 { + rpmhpd_opp_turbo_l1: opp11 { opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; }; }; @@ -3720,6 +4061,7 @@ <0 0x01d87c00 0 0x200>, <0 0x01d87800 0 0x188>, <0 0x01d87a00 0 0x200>; + #clock-cells = <1>; #phy-cells = <0>; }; }; @@ -3825,7 +4167,7 @@ lpass_ag_noc: interconnect@3c40000 { compatible = "qcom,sm8450-lpass-ag-noc"; - reg = <0 0x3c40000 0 0x17200>; + reg = <0 0x03c40000 0 0x17200>; #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; @@ -3953,7 +4295,7 @@ type = "passive"; }; - cpu4_top_crit: cpu_crit { + cpu4_top_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -3979,7 +4321,7 @@ type = "passive"; }; - cpu4_bottom_crit: cpu_crit { + cpu4_bottom_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -4005,7 +4347,7 @@ type = "passive"; }; - cpu5_top_crit: cpu_crit { + cpu5_top_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -4031,7 +4373,7 @@ type = "passive"; }; - cpu5_bottom_crit: cpu_crit { + cpu5_bottom_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -4057,7 +4399,7 @@ type = "passive"; }; - cpu6_top_crit: cpu_crit { + cpu6_top_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -4083,7 +4425,7 @@ type = "passive"; }; - cpu6_bottom_crit: cpu_crit { + cpu6_bottom_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -4109,7 +4451,7 @@ type = "passive"; }; - cpu7_top_crit: cpu_crit { + cpu7_top_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -4135,7 +4477,7 @@ type = "passive"; }; - cpu7_middle_crit: cpu_crit { + cpu7_middle_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -4161,7 +4503,7 @@ type = "passive"; }; - cpu7_bottom_crit: cpu_crit { + cpu7_bottom_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -4193,7 +4535,7 @@ type = "passive"; }; - gpu0_tj_cfg: tj_cfg { + gpu0_tj_cfg: tj-cfg { temperature = <95000>; hysteresis = <5000>; type = "passive"; @@ -4225,7 +4567,7 @@ type = "passive"; }; - gpu1_tj_cfg: tj_cfg { + gpu1_tj_cfg: tj-cfg { temperature = <95000>; hysteresis = <5000>; type = "passive"; @@ -4271,7 +4613,7 @@ type = "passive"; }; - cpu0_crit: cpu_crit { + cpu0_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -4297,7 +4639,7 @@ type = "passive"; }; - cpu1_crit: cpu_crit { + cpu1_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -4323,7 +4665,7 @@ type = "passive"; }; - cpu2_crit: cpu_crit { + cpu2_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -4349,7 +4691,7 @@ type = "passive"; }; - cpu3_crit: cpu_crit { + cpu3_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts new file mode 100644 index 000000000000..5db6e789e6b8 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts @@ -0,0 +1,568 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Linaro Limited + */ + +/dts-v1/; + +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sm8550.dtsi" +#include "pm8010.dtsi" +#include "pm8550.dtsi" +#include "pm8550b.dtsi" +#include "pm8550ve.dtsi" +#include "pm8550vs.dtsi" +#include "pmk8550.dtsi" +#include "pmr735d.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. SM8550 MTP"; + compatible = "qcom,sm8550-mtp", "qcom,sm8550"; + + aliases { + serial0 = &uart7; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8550-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-bob1-supply = <&vph_pwr>; + vdd-bob2-supply = <&vph_pwr>; + vdd-l2-l13-l14-supply = <&vreg_bob1>; + vdd-l3-supply = <&vreg_s4g_1p3>; + vdd-l5-l16-supply = <&vreg_bob1>; + vdd-l6-l7-supply = <&vreg_bob1>; + vdd-l8-l9-supply = <&vreg_bob1>; + vdd-l11-supply = <&vreg_s4g_1p3>; + vdd-l12-supply = <&vreg_s6g_1p8>; + vdd-l15-supply = <&vreg_s6g_1p8>; + vdd-l17-supply = <&vreg_bob2>; + + vreg_bob1: bob1 { + regulator-name = "vreg_bob1"; + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob2: bob2 { + regulator-name = "vreg_bob2"; + regulator-min-microvolt = <2720000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1b_1p8: ldo1 { + regulator-name = "vreg_l1b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2b_3p0: ldo2 { + regulator-name = "vreg_l2b_3p0"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5b_3p1: ldo5 { + regulator-name = "vreg_l5b_3p1"; + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6b_1p8: ldo6 { + regulator-name = "vreg_l6b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7b_1p8: ldo7 { + regulator-name = "vreg_l7b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8b_1p8: ldo8 { + regulator-name = "vreg_l8b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9b_2p9: ldo9 { + regulator-name = "vreg_l9b_2p9"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11b_1p2: ldo11 { + regulator-name = "vreg_l11b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12b_1p8: ldo12 { + regulator-name = "vreg_l12b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13b_3p0: ldo13 { + regulator-name = "vreg_l13b_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14b_3p2: ldo14 { + regulator-name = "vreg_l14b_3p2"; + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15b_1p8: ldo15 { + regulator-name = "vreg_l15b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16b_2p8: ldo16 { + regulator-name = "vreg_l16b_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17b_2p5: ldo17 { + regulator-name = "vreg_l17b_2p5"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-l3-supply = <&vreg_s4e_0p9>; + + vreg_l3c_0p91: ldo3 { + regulator-name = "vreg_l3c_0p9"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-2 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + qcom,pmic-id = "d"; + + vdd-l1-supply = <&vreg_s4e_0p9>; + + vreg_l1d_0p88: ldo1 { + regulator-name = "vreg_l1d_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-3 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + qcom,pmic-id = "e"; + + vdd-l1-supply = <&vreg_s4e_0p9>; + vdd-l2-supply = <&vreg_s4e_0p9>; + vdd-l3-supply = <&vreg_s4g_1p3>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + + vreg_s4e_0p9: smps4 { + regulator-name = "vreg_s4e_0p9"; + regulator-min-microvolt = <904000>; + regulator-max-microvolt = <984000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5e_1p1: smps5 { + regulator-name = "vreg_s5e_1p1"; + regulator-min-microvolt = <1080000>; + regulator-max-microvolt = <1120000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1e_0p88: ldo1 { + regulator-name = "vreg_l1e_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2e_0p9: ldo2 { + regulator-name = "vreg_l2e_0p9"; + regulator-min-microvolt = <904000>; + regulator-max-microvolt = <970000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3e_1p2: ldo3 { + regulator-name = "vreg_l3e_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-4 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "f"; + + vdd-l1-supply = <&vreg_s4e_0p9>; + vdd-l2-supply = <&vreg_s4e_0p9>; + vdd-l3-supply = <&vreg_s4e_0p9>; + vdd-s4-supply = <&vph_pwr>; + + vreg_s4f_0p5: smps4 { + regulator-name = "vreg_s4f_0p5"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <700000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1f_0p9: ldo1 { + regulator-name = "vreg_l1f_0p9"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2f_0p88: ldo2 { + regulator-name = "vreg_l2f_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3f_0p91: ldo3 { + regulator-name = "vreg_l3f_0p91"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-5 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + qcom,pmic-id = "g"; + + vdd-l1-supply = <&vreg_s4g_1p3>; + vdd-l2-supply = <&vreg_s4g_1p3>; + vdd-l3-supply = <&vreg_s4g_1p3>; + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + + vreg_s1g_1p2: smps1 { + regulator-name = "vreg_s1g_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s2g_0p8: smps2 { + regulator-name = "vreg_s2g_0p8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s3g_0p7: smps3 { + regulator-name = "vreg_s3g_0p7"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1004000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s4g_1p3: smps4 { + regulator-name = "vreg_s4g_1p3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1352000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5g_0p8: smps5 { + regulator-name = "vreg_s5g_0p8"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1004000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s6g_1p8: smps6 { + regulator-name = "vreg_s6g_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1g_1p2: ldo1 { + regulator-name = "vreg_l1g_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2g_1p2: ldo2 { + regulator-name = "vreg_l2g_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3g_1p2: ldo3 { + regulator-name = "vreg_l3g_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&dispcc { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { + vdda-supply = <&vreg_l3e_1p2>; + status = "okay"; + + panel@0 { + compatible = "visionox,vtdr6130"; + reg = <0>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sde_dsi_active>, <&sde_te_active>; + pinctrl-1 = <&sde_dsi_suspend>, <&sde_te_suspend>; + + vddio-supply = <&vreg_l12b_1p8>; + vci-supply = <&vreg_l13b_3p0>; + vdd-supply = <&vreg_l11b_1p2>; + + reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>; + + port { + panel0_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; +}; + +&mdss_dsi0_out { + remote-endpoint = <&panel0_in>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + vdds-supply = <&vreg_l1e_0p88>; + status = "okay"; +}; + +&mdss_mdp { + status = "okay"; +}; + +&pcie_1_phy_aux_clk { + clock-frequency = <1000>; +}; + +&pcie0 { + wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&pcie0_phy { + vdda-phy-supply = <&vreg_l1e_0p88>; + vdda-pll-supply = <&vreg_l3e_1p2>; + status = "okay"; +}; + +&pcie1 { + wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>; + perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&pcie1_phy { + vdda-phy-supply = <&vreg_l3c_0p91>; + vdda-pll-supply = <&vreg_l3e_1p2>; + vdda-qref-supply = <&vreg_l1e_0p88>; + status = "okay"; +}; + +&pm8550_gpios { + sdc2_card_det_n: sdc2-card-det-state { + pins = "gpio12"; + function = "normal"; + input-enable; + output-disable; + bias-pull-up; + power-source = <1>; /* 1.8 V */ + }; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/sm8550/adsp.mbn", + "qcom/sm8550/adsp_dtb.mbn"; + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/sm8550/cdsp.mbn", + "qcom/sm8550/cdsp_dtb.mbn"; + status = "okay"; +}; + +&remoteproc_mpss { + firmware-name = "qcom/sm8550/modem.mbn", + "qcom/sm8550/modem_dtb.mbn"; + status = "okay"; +}; + +&sdhc_2 { + cd-gpios = <&pm8550_gpios 12 GPIO_ACTIVE_LOW>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_default &sdc2_card_det_n>; + pinctrl-1 = <&sdc2_sleep &sdc2_card_det_n>; + vmmc-supply = <&vreg_l9b_2p9>; + vqmmc-supply = <&vreg_l8b_1p8>; + bus-width = <4>; + no-sdio; + no-mmc; + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&tlmm { + gpio-reserved-ranges = <32 8>; + + sde_dsi_active: sde-dsi-active-state { + pins = "gpio133"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + sde_dsi_suspend: sde-dsi-suspend-state { + pins = "gpio133"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + sde_te_active: sde-te-active-state { + pins = "gpio86"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; + }; + + sde_te_suspend: sde-te-suspend-state { + pins = "gpio86"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; + }; +}; + +&uart7 { + status = "okay"; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>; + vcc-supply = <&vreg_l17b_2p5>; + vcc-max-microamp = <1300000>; + vccq-supply = <&vreg_l1g_1p2>; + vccq-max-microamp = <1200000>; + vccq2-supply = <&vreg_l3g_1p2>; + vccq2-max-microamp = <100>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l1d_0p88>; + vdda-pll-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + vdd-supply = <&vreg_l1e_0p88>; + vdda12-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&usb_dp_qmpphy { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l3f_0p91>; + + status = "okay"; +}; + +&xo_board { + clock-frequency = <76800000>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi new file mode 100644 index 000000000000..ff4d342c0725 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi @@ -0,0 +1,4806 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Linaro Limited + */ + +#include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/clock/qcom,sm8550-gcc.h> +#include <dt-bindings/clock/qcom,sm8550-tcsr.h> +#include <dt-bindings/clock/qcom,sm8550-dispcc.h> +#include <dt-bindings/dma/qcom-gpi.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interconnect/qcom,sm8550-rpmh.h> +#include <dt-bindings/mailbox/qcom-ipcc.h> +#include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/soc/qcom,gpr.h> +#include <dt-bindings/soc/qcom,rpmh-rsc.h> +#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h> +#include <dt-bindings/phy/phy-qcom-qmp.h> +#include <dt-bindings/thermal/thermal.h> + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + bi_tcxo_div2: bi-tcxo-div2-clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-mult = <1>; + clock-div = <2>; + }; + + bi_tcxo_ao_div2: bi-tcxo-ao-div2-clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&rpmhcc RPMH_CXO_CLK_A>; + clock-mult = <1>; + clock-div = <2>; + }; + + pcie_1_phy_aux_clk: pcie-1-phy-aux-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0 0>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + power-domains = <&CPU_PD0>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + #cooling-cells = <2>; + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + next-level-cache = <&L3_0>; + L3_0: l3-cache { + compatible = "cache"; + cache-level = <3>; + }; + }; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0 0x100>; + enable-method = "psci"; + next-level-cache = <&L2_100>; + power-domains = <&CPU_PD1>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + #cooling-cells = <2>; + L2_100: l2-cache { + compatible = "cache"; + cache-level = <2>; + next-level-cache = <&L3_0>; + }; + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0 0x200>; + enable-method = "psci"; + next-level-cache = <&L2_200>; + power-domains = <&CPU_PD2>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + #cooling-cells = <2>; + L2_200: l2-cache { + compatible = "cache"; + cache-level = <2>; + next-level-cache = <&L3_0>; + }; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0 0x300>; + enable-method = "psci"; + next-level-cache = <&L2_300>; + power-domains = <&CPU_PD3>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; + capacity-dmips-mhz = <1792>; + dynamic-power-coefficient = <270>; + #cooling-cells = <2>; + L2_300: l2-cache { + compatible = "cache"; + cache-level = <2>; + next-level-cache = <&L3_0>; + }; + }; + + CPU4: cpu@400 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0 0x400>; + enable-method = "psci"; + next-level-cache = <&L2_400>; + power-domains = <&CPU_PD4>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; + capacity-dmips-mhz = <1792>; + dynamic-power-coefficient = <270>; + #cooling-cells = <2>; + L2_400: l2-cache { + compatible = "cache"; + cache-level = <2>; + next-level-cache = <&L3_0>; + }; + }; + + CPU5: cpu@500 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0 0x500>; + enable-method = "psci"; + next-level-cache = <&L2_500>; + power-domains = <&CPU_PD5>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; + capacity-dmips-mhz = <1792>; + dynamic-power-coefficient = <270>; + #cooling-cells = <2>; + L2_500: l2-cache { + compatible = "cache"; + cache-level = <2>; + next-level-cache = <&L3_0>; + }; + }; + + CPU6: cpu@600 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0 0x600>; + enable-method = "psci"; + next-level-cache = <&L2_600>; + power-domains = <&CPU_PD6>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; + capacity-dmips-mhz = <1792>; + dynamic-power-coefficient = <270>; + #cooling-cells = <2>; + L2_600: l2-cache { + compatible = "cache"; + cache-level = <2>; + next-level-cache = <&L3_0>; + }; + }; + + CPU7: cpu@700 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0 0x700>; + enable-method = "psci"; + next-level-cache = <&L2_700>; + power-domains = <&CPU_PD7>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 2>; + capacity-dmips-mhz = <1894>; + dynamic-power-coefficient = <588>; + #cooling-cells = <2>; + L2_700: l2-cache { + compatible = "cache"; + cache-level = <2>; + next-level-cache = <&L3_0>; + }; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + + core4 { + cpu = <&CPU4>; + }; + + core5 { + cpu = <&CPU5>; + }; + + core6 { + cpu = <&CPU6>; + }; + + core7 { + cpu = <&CPU7>; + }; + }; + }; + + idle-states { + entry-method = "psci"; + + LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + idle-state-name = "silver-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <800>; + exit-latency-us = <750>; + min-residency-us = <4090>; + local-timer-stop; + }; + + BIG_CPU_SLEEP_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + idle-state-name = "gold-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <600>; + exit-latency-us = <1550>; + min-residency-us = <4791>; + local-timer-stop; + }; + }; + + domain-idle-states { + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x41000044>; + entry-latency-us = <1050>; + exit-latency-us = <2500>; + min-residency-us = <5309>; + }; + + CLUSTER_SLEEP_1: cluster-sleep-1 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x4100c344>; + entry-latency-us = <2700>; + exit-latency-us = <3500>; + min-residency-us = <13959>; + }; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-sm8550", "qcom,scm"; + interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>; + }; + }; + + clk_virt: interconnect-0 { + compatible = "qcom,sm8550-clk-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mc_virt: interconnect-1 { + compatible = "qcom,sm8550-mc-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + memory@a0000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0 0xa0000000 0 0>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + + CPU_PD0: power-domain-cpu0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD1: power-domain-cpu1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD2: power-domain-cpu2 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD3: power-domain-cpu3 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD4: power-domain-cpu4 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD5: power-domain-cpu5 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD6: power-domain-cpu6 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD7: power-domain-cpu7 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CLUSTER_PD: power-domain-cluster { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_SLEEP_0>, <&CLUSTER_SLEEP_1>; + }; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hyp_mem: hyp-region@80000000 { + reg = <0 0x80000000 0 0xa00000>; + no-map; + }; + + cpusys_vm_mem: cpusys-vm-region@80a00000 { + reg = <0 0x80a00000 0 0x400000>; + no-map; + }; + + hyp_tags_mem: hyp-tags-region@80e00000 { + reg = <0 0x80e00000 0 0x3d0000>; + no-map; + }; + + xbl_sc_mem: xbl-sc-region@d8100000 { + reg = <0 0xd8100000 0 0x40000>; + no-map; + }; + + + hyp_tags_reserved_mem: hyp-tags-reserved-region@811d0000 { + reg = <0 0x811d0000 0 0x30000>; + no-map; + }; + + /* merged xbl_dt_log, xbl_ramdump, aop_image */ + xbl_dt_log_merged_mem: xbl-dt-log-merged-region@81a00000 { + reg = <0 0x81a00000 0 0x260000>; + no-map; + }; + + aop_cmd_db_mem: aop-cmd-db-region@81c60000 { + compatible = "qcom,cmd-db"; + reg = <0 0x81c60000 0 0x20000>; + no-map; + }; + + /* merged aop_config, tme_crash_dump, tme_log, uefi_log */ + aop_config_merged_mem: aop-config-merged-region@81c80000 { + reg = <0 0x81c80000 0 0x74000>; + no-map; + }; + + /* secdata region can be reused by apps */ + smem: smem@81d00000 { + compatible = "qcom,smem"; + reg = <0 0x81d00000 0 0x200000>; + hwlocks = <&tcsr_mutex 3>; + no-map; + }; + + adsp_mhi_mem: adsp-mhi-region@81f00000 { + reg = <0 0x81f00000 0 0x20000>; + no-map; + }; + + global_sync_mem: global-sync-region@82600000 { + reg = <0 0x82600000 0 0x100000>; + no-map; + }; + + tz_stat_mem: tz-stat-region@82700000 { + reg = <0 0x82700000 0 0x100000>; + no-map; + }; + + cdsp_secure_heap_mem: cdsp-secure-heap-region@82800000 { + reg = <0 0x82800000 0 0x4600000>; + no-map; + }; + + mpss_mem: mpss-region@8a800000 { + reg = <0 0x8a800000 0 0x10800000>; + no-map; + }; + + q6_mpss_dtb_mem: q6-mpss-dtb-region@9b000000 { + reg = <0 0x9b000000 0 0x80000>; + no-map; + }; + + ipa_fw_mem: ipa-fw-region@9b080000 { + reg = <0 0x9b080000 0 0x10000>; + no-map; + }; + + ipa_gsi_mem: ipa-gsi-region@9b090000 { + reg = <0 0x9b090000 0 0xa000>; + no-map; + }; + + gpu_micro_code_mem: gpu-micro-code-region@9b09a000 { + reg = <0 0x9b09a000 0 0x2000>; + no-map; + }; + + spss_region_mem: spss-region@9b100000 { + reg = <0 0x9b100000 0 0x180000>; + no-map; + }; + + /* First part of the "SPU secure shared memory" region */ + spu_tz_shared_mem: spu-tz-shared-region@9b280000 { + reg = <0 0x9b280000 0 0x60000>; + no-map; + }; + + /* Second part of the "SPU secure shared memory" region */ + spu_modem_shared_mem: spu-modem-shared-region@9b2e0000 { + reg = <0 0x9b2e0000 0 0x20000>; + no-map; + }; + + camera_mem: camera-region@9b300000 { + reg = <0 0x9b300000 0 0x800000>; + no-map; + }; + + video_mem: video-region@9bb00000 { + reg = <0 0x9bb00000 0 0x700000>; + no-map; + }; + + cvp_mem: cvp-region@9c200000 { + reg = <0 0x9c200000 0 0x700000>; + no-map; + }; + + cdsp_mem: cdsp-region@9c900000 { + reg = <0 0x9c900000 0 0x2000000>; + no-map; + }; + + q6_cdsp_dtb_mem: q6-cdsp-dtb-region@9e900000 { + reg = <0 0x9e900000 0 0x80000>; + no-map; + }; + + q6_adsp_dtb_mem: q6-adsp-dtb-region@9e980000 { + reg = <0 0x9e980000 0 0x80000>; + no-map; + }; + + adspslpi_mem: adspslpi-region@9ea00000 { + reg = <0 0x9ea00000 0 0x4080000>; + no-map; + }; + + /* uefi region can be reused by apps */ + + /* Linux kernel image is loaded at 0xa8000000 */ + + rmtfs_mem: rmtfs-region@d4a80000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0xd4a80000 0x0 0x280000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + + mpss_dsm_mem: mpss-dsm-region@d4d00000 { + reg = <0 0xd4d00000 0 0x3300000>; + no-map; + }; + + tz_reserved_mem: tz-reserved-region@d8000000 { + reg = <0 0xd8000000 0 0x100000>; + no-map; + }; + + cpucp_fw_mem: cpucp-fw-region@d8140000 { + reg = <0 0xd8140000 0 0x1c0000>; + no-map; + }; + + qtee_mem: qtee-region@d8300000 { + reg = <0 0xd8300000 0 0x500000>; + no-map; + }; + + ta_mem: ta-region@d8800000 { + reg = <0 0xd8800000 0 0x8a00000>; + no-map; + }; + + tz_tags_mem: tz-tags-region@e1200000 { + reg = <0 0xe1200000 0 0x2740000>; + no-map; + }; + + hwfence_shbuf: hwfence-shbuf-region@e6440000 { + reg = <0 0xe6440000 0 0x279000>; + no-map; + }; + + trust_ui_vm_mem: trust-ui-vm-region@f3600000 { + reg = <0 0xf3600000 0 0x4aee000>; + no-map; + }; + + trust_ui_vm_dump: trust-ui-vm-dump-region@f80ee000 { + reg = <0 0xf80ee000 0 0x1000>; + no-map; + }; + + trust_ui_vm_qrtr: trust-ui-vm-qrt-region@f80ef000 { + reg = <0 0xf80ef000 0 0x9000>; + no-map; + }; + + trust_ui_vm_vblk0_ring: trust-ui-vm-vblk0-ring-region@f80f8000 { + reg = <0 0xf80f8000 0 0x4000>; + no-map; + }; + + trust_ui_vm_vblk1_ring: trust-ui-vm-vblk1-ring-region@f80fc000 { + reg = <0 0xf80fc000 0 0x4000>; + no-map; + }; + + trust_ui_vm_swiotlb: trust-ui-vm-swiotlb-region@f8100000 { + reg = <0 0xf8100000 0 0x100000>; + no-map; + }; + + oem_vm_mem: oem-vm-region@f8400000 { + reg = <0 0xf8400000 0 0x4800000>; + no-map; + }; + + oem_vm_vblk0_ring: oem-vm-vblk0-ring-region@fcc00000 { + reg = <0 0xfcc00000 0 0x4000>; + no-map; + }; + + oem_vm_swiotlb: oem-vm-swiotlb-region@fcc04000 { + reg = <0 0xfcc04000 0 0x100000>; + no-map; + }; + + hyp_ext_tags_mem: hyp-ext-tags-region@fce00000 { + reg = <0 0xfce00000 0 0x2900000>; + no-map; + }; + + hyp_ext_reserved_mem: hyp-ext-reserved-region@ff700000 { + reg = <0 0xff700000 0 0x100000>; + no-map; + }; + }; + + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + smp2p_adsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_adsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-cdsp { + compatible = "qcom,smp2p"; + qcom,smem = <94>, <432>; + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <5>; + + smp2p_cdsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_cdsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-modem { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + interrupts-extended = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + smp2p_modem_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_modem_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + + ipa_smp2p_out: ipa-ap-to-modem { + qcom,entry-name = "ipa"; + #qcom,smem-state-cells = <1>; + }; + + ipa_smp2p_in: ipa-modem-to-ap { + qcom,entry-name = "ipa"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + soc: soc@0 { + compatible = "simple-bus"; + ranges = <0 0 0 0 0x10 0>; + dma-ranges = <0 0 0 0 0x10 0>; + + #address-cells = <2>; + #size-cells = <2>; + + gcc: clock-controller@100000 { + compatible = "qcom,sm8550-gcc"; + reg = <0 0x00100000 0 0x1f4200>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clocks = <&bi_tcxo_div2>, <&sleep_clk>, + <&pcie0_phy>, + <&pcie1_phy>, + <&pcie_1_phy_aux_clk>, + <&ufs_mem_phy 0>, + <&ufs_mem_phy 1>, + <&ufs_mem_phy 2>, + <&usb_dp_qmpphy QMP_USB43DP_USB3_PIPE_CLK>; + }; + + ipcc: mailbox@408000 { + compatible = "qcom,sm8550-ipcc", "qcom,ipcc"; + reg = <0 0x00408000 0 0x1000>; + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <3>; + #mbox-cells = <2>; + }; + + gpi_dma2: dma-controller@800000 { + compatible = "qcom,sm8550-gpi-dma", "qcom,sm6350-gpi-dma"; + #dma-cells = <3>; + reg = <0 0x00800000 0 0x60000>; + interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <12>; + dma-channel-mask = <0x3e>; + iommus = <&apps_smmu 0x436 0>; + status = "disabled"; + }; + + qupv3_id_1: geniqup@8c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0 0x008c0000 0 0x2000>; + ranges; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; + iommus = <&apps_smmu 0x423 0>; + #address-cells = <2>; + #size-cells = <2>; + status = "disabled"; + + i2c8: i2c@880000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00880000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c8_data_clk>; + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>, + <&gpi_dma2 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi8: spi@880000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00880000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>, + <&gpi_dma2 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c9: i2c@884000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00884000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c9_data_clk>; + interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>, + <&gpi_dma2 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi9: spi@884000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00884000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>, + <&gpi_dma2 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c10: i2c@888000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00888000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c10_data_clk>; + interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>, + <&gpi_dma2 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi10: spi@888000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00888000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>, + <&gpi_dma2 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c11: i2c@88c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0088c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c11_data_clk>; + interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>, + <&gpi_dma2 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi11: spi@88c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0088c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>, + <&gpi_dma2 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c12: i2c@890000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00890000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c12_data_clk>; + interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>, + <&gpi_dma2 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi12: spi@890000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00890000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>, + <&gpi_dma2 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c13: i2c@894000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00894000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c13_data_clk>; + interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>, + <&gpi_dma2 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi13: spi@894000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00894000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>, + <&gpi_dma2 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c15: i2c@89c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0089c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c15_data_clk>; + interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma2 0 7 QCOM_GPI_I2C>, + <&gpi_dma2 1 7 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi15: spi@89c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0089c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>; + interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma2 0 7 QCOM_GPI_SPI>, + <&gpi_dma2 1 7 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + i2c_master_hub_0: geniqup@9c0000 { + compatible = "qcom,geni-se-i2c-master-hub"; + reg = <0x0 0x009c0000 0x0 0x2000>; + clock-names = "s-ahb"; + clocks = <&gcc GCC_QUPV3_I2C_S_AHB_CLK>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + i2c_hub_0: i2c@980000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0x0 0x00980000 0x0 0x4000>; + clock-names = "se", "core"; + clocks = <&gcc GCC_QUPV3_I2C_S0_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&hub_i2c0_data_clk>; + interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c_hub_1: i2c@984000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0x0 0x00984000 0x0 0x4000>; + clock-names = "se", "core"; + clocks = <&gcc GCC_QUPV3_I2C_S1_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&hub_i2c1_data_clk>; + interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c_hub_2: i2c@988000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0x0 0x00988000 0x0 0x4000>; + clock-names = "se", "core"; + clocks = <&gcc GCC_QUPV3_I2C_S2_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&hub_i2c2_data_clk>; + interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c_hub_3: i2c@98c000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0x0 0x0098c000 0x0 0x4000>; + clock-names = "se", "core"; + clocks = <&gcc GCC_QUPV3_I2C_S3_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&hub_i2c3_data_clk>; + interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c_hub_4: i2c@990000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0x0 0x00990000 0x0 0x4000>; + clock-names = "se", "core"; + clocks = <&gcc GCC_QUPV3_I2C_S4_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&hub_i2c4_data_clk>; + interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c_hub_5: i2c@994000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0 0x00994000 0 0x4000>; + clock-names = "se", "core"; + clocks = <&gcc GCC_QUPV3_I2C_S5_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&hub_i2c5_data_clk>; + interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c_hub_6: i2c@998000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0 0x00998000 0 0x4000>; + clock-names = "se", "core"; + clocks = <&gcc GCC_QUPV3_I2C_S6_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&hub_i2c6_data_clk>; + interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c_hub_7: i2c@99c000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0 0x0099c000 0 0x4000>; + clock-names = "se", "core"; + clocks = <&gcc GCC_QUPV3_I2C_S7_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&hub_i2c7_data_clk>; + interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c_hub_8: i2c@9a0000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0 0x009a0000 0 0x4000>; + clock-names = "se", "core"; + clocks = <&gcc GCC_QUPV3_I2C_S8_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&hub_i2c8_data_clk>; + interrupts = <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c_hub_9: i2c@9a4000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0 0x009a4000 0 0x4000>; + clock-names = "se", "core"; + clocks = <&gcc GCC_QUPV3_I2C_S9_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&hub_i2c9_data_clk>; + interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + }; + + gpi_dma1: dma-controller@a00000 { + compatible = "qcom,sm8550-gpi-dma", "qcom,sm6350-gpi-dma"; + #dma-cells = <3>; + reg = <0 0x00a00000 0 0x60000>; + interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <12>; + dma-channel-mask = <0x1e>; + iommus = <&apps_smmu 0xb6 0>; + status = "disabled"; + }; + + qupv3_id_0: geniqup@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0 0x00ac0000 0 0x2000>; + ranges; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + iommus = <&apps_smmu 0xa3 0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>; + interconnect-names = "qup-core"; + #address-cells = <2>; + #size-cells = <2>; + status = "disabled"; + + i2c0: i2c@a80000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a80000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c0_data_clk>; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, + <&gpi_dma1 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi0: spi@a80000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a80000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>, + <&gpi_dma1 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@a84000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a84000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c1_data_clk>; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, + <&gpi_dma1 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi1: spi@a84000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a84000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>, + <&gpi_dma1 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@a88000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a88000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c2_data_clk>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, + <&gpi_dma1 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi2: spi@a88000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a88000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>, + <&gpi_dma1 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a8c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c3_data_clk>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, + <&gpi_dma1 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi3: spi@a8c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a8c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>, + <&gpi_dma1 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@a90000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a90000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c4_data_clk>; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, + <&gpi_dma1 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi4: spi@a90000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a90000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>, + <&gpi_dma1 1 4 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c@a94000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a94000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c5_data_clk>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>, + <&gpi_dma1 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi5: spi@a94000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a94000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>, + <&gpi_dma1 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c6: i2c@a98000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a98000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c6_data_clk>; + interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>, + <&gpi_dma1 1 6 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi6: spi@a98000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a98000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>, + <&gpi_dma1 1 6 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart7: serial@a9c000 { + compatible = "qcom,geni-debug-uart"; + reg = <0 0x00a9c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart7_default>; + interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>; + interconnect-names = "qup-core", "qup-config"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>; + status = "disabled"; + }; + }; + + cnoc_main: interconnect@1500000 { + compatible = "qcom,sm8550-cnoc-main"; + reg = <0 0x01500000 0 0x13080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + config_noc: interconnect@1600000 { + compatible = "qcom,sm8550-config-noc"; + reg = <0 0x01600000 0 0x6200>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system_noc: interconnect@1680000 { + compatible = "qcom,sm8550-system-noc"; + reg = <0 0x01680000 0 0x1d080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + pcie_noc: interconnect@16c0000 { + compatible = "qcom,sm8550-pcie-anoc"; + reg = <0 0x016c0000 0 0x12200>; + #interconnect-cells = <2>; + clocks = <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>, + <&gcc GCC_CFG_NOC_PCIE_ANOC_AHB_CLK>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre1_noc: interconnect@16e0000 { + compatible = "qcom,sm8550-aggre1-noc"; + reg = <0 0x016e0000 0 0x14400>; + #interconnect-cells = <2>; + clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre2_noc: interconnect@1700000 { + compatible = "qcom,sm8550-aggre2-noc"; + reg = <0 0x01700000 0 0x1e400>; + #interconnect-cells = <2>; + clocks = <&rpmhcc RPMH_IPA_CLK>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mmss_noc: interconnect@1780000 { + compatible = "qcom,sm8550-mmss-noc"; + reg = <0 0x01780000 0 0x5b800>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + pcie0: pci@1c00000 { + device_type = "pci"; + compatible = "qcom,pcie-sm8550"; + reg = <0 0x01c00000 0 0x3000>, + <0 0x60000000 0 0xf1d>, + <0 0x60000f20 0 0xa8>, + <0 0x60001000 0 0x1000>, + <0 0x60100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0x3d00000>; + bus-range = <0x00 0xff>; + + dma-coherent; + + linux,pci-domain = <0>; + num-lanes = <2>; + + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, + <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>; + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ddrss_sf_tbu", + "aggre0"; + + interconnect-names = "pcie-mem"; + interconnects = <&pcie_noc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>; + + iommus = <&apps_smmu 0x1400 0x7f>; + iommu-map = <0x0 &apps_smmu 0x1400 0x1>, + <0x100 &apps_smmu 0x1401 0x1>; + + resets = <&gcc GCC_PCIE_0_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_0_GDSC>; + + phys = <&pcie0_phy>; + phy-names = "pciephy"; + + perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie0_default_state>; + + status = "disabled"; + }; + + pcie0_phy: phy@1c06000 { + compatible = "qcom,sm8550-qmp-gen3x2-pcie-phy"; + reg = <0 0x01c06000 0 0x2000>; + + clocks = <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&tcsr TCSR_PCIE_0_CLKREF_EN>, + <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>, + <&gcc GCC_PCIE_0_PIPE_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "rchng", + "pipe"; + + resets = <&gcc GCC_PCIE_0_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + power-domains = <&gcc PCIE_0_PHY_GDSC>; + + #clock-cells = <0>; + clock-output-names = "pcie0_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + pcie1: pci@1c08000 { + device_type = "pci"; + compatible = "qcom,pcie-sm8550"; + reg = <0x0 0x01c08000 0x0 0x3000>, + <0x0 0x40000000 0x0 0xf1d>, + <0x0 0x40000f20 0x0 0xa8>, + <0x0 0x40001000 0x0 0x1000>, + <0x0 0x40100000 0x0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0x0 0x40200000 0 0x40200000 0x0 0x100000>, + <0x02000000 0x0 0x40300000 0 0x40300000 0x0 0x1fd00000>; + bus-range = <0x00 0xff>; + + dma-coherent; + + linux,pci-domain = <1>; + num-lanes = <2>; + + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, + <&gcc GCC_PCIE_1_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>, + <&gcc GCC_CNOC_PCIE_SF_AXI_CLK>; + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ddrss_sf_tbu", + "aggre1", + "cnoc_pcie_sf_axi"; + + assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>; + assigned-clock-rates = <19200000>; + + interconnect-names = "pcie-mem"; + interconnects = <&pcie_noc MASTER_PCIE_1 0 &mc_virt SLAVE_EBI1 0>; + + iommus = <&apps_smmu 0x1480 0x7f>; + iommu-map = <0x0 &apps_smmu 0x1480 0x1>, + <0x100 &apps_smmu 0x1481 0x1>; + + resets = <&gcc GCC_PCIE_1_BCR>, + <&gcc GCC_PCIE_1_LINK_DOWN_BCR>; + reset-names = "pci", + "pcie_1_link_down_reset"; + + power-domains = <&gcc PCIE_1_GDSC>; + + phys = <&pcie1_phy>; + phy-names = "pciephy"; + + perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>; + enable-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_default_state>; + + status = "disabled"; + }; + + pcie1_phy: phy@1c0e000 { + compatible = "qcom,sm8550-qmp-gen4x2-pcie-phy"; + reg = <0x0 0x01c0e000 0x0 0x2000>; + + clocks = <&gcc GCC_PCIE_1_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&tcsr TCSR_PCIE_1_CLKREF_EN>, + <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>, + <&gcc GCC_PCIE_1_PIPE_CLK>, + <&gcc GCC_PCIE_1_PHY_AUX_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "rchng", + "pipe", "aux_phy"; + + resets = <&gcc GCC_PCIE_1_PHY_BCR>, + <&gcc GCC_PCIE_1_NOCSR_COM_PHY_BCR>; + reset-names = "phy", "nocsr"; + + assigned-clocks = <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + power-domains = <&gcc PCIE_1_PHY_GDSC>; + + #clock-cells = <0>; + clock-output-names = "pcie1_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + cryptobam: dma-controller@1dc4000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x0 0x01dc4000 0x0 0x28000>; + interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely; + iommus = <&apps_smmu 0x480 0x0>, + <&apps_smmu 0x481 0x0>; + }; + + crypto: crypto@1de0000 { + compatible = "qcom,sm8550-qce"; + reg = <0x0 0x01dfa000 0x0 0x6000>; + dmas = <&cryptobam 4>, <&cryptobam 5>; + dma-names = "rx", "tx"; + iommus = <&apps_smmu 0x480 0x0>, + <&apps_smmu 0x481 0x0>; + interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "memory"; + }; + + ufs_mem_phy: phy@1d80000 { + compatible = "qcom,sm8550-qmp-ufs-phy"; + reg = <0x0 0x01d80000 0x0 0x2000>; + clocks = <&tcsr TCSR_UFS_CLKREF_EN>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + clock-names = "ref", "ref_aux"; + + power-domains = <&gcc UFS_MEM_PHY_GDSC>; + + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + + ufs_mem_hc: ufs@1d84000 { + compatible = "qcom,sm8550-ufshc", "qcom,ufshc", + "jedec,ufs-2.0"; + reg = <0x0 0x01d84000 0x0 0x3000>; + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; + phys = <&ufs_mem_phy>; + phy-names = "ufsphy"; + lanes-per-direction = <2>; + #reset-cells = <1>; + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + + power-domains = <&gcc UFS_PHY_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + iommus = <&apps_smmu 0x60 0x0>; + + interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>; + + interconnect-names = "ufs-ddr", "cpu-ufs"; + clock-names = "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk"; + clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&tcsr TCSR_UFS_PAD_CLKREF_EN>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; + freq-table-hz = + <75000000 300000000>, + <0 0>, + <0 0>, + <75000000 300000000>, + <100000000 403000000>, + <0 0>, + <0 0>, + <0 0>; + status = "disabled"; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0 0x01f40000 0 0x20000>; + #hwlock-cells = <1>; + }; + + tcsr: clock-controller@1fc0000 { + compatible = "qcom,sm8550-tcsr", "syscon"; + reg = <0 0x01fc0000 0 0x30000>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + remoteproc_mpss: remoteproc@4080000 { + compatible = "qcom,sm8550-mpss-pas"; + reg = <0x0 0x04080000 0x0 0x4040>; + + interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", + "stop-ack", "shutdown-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SM8550_CX>, + <&rpmhpd SM8550_MSS>; + power-domain-names = "cx", "mss"; + + interconnects = <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>; + + memory-region = <&mpss_mem>, <&q6_mpss_dtb_mem>, <&mpss_dsm_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_modem_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + label = "mpss"; + qcom,remote-pid = <1>; + }; + }; + + lpass_tlmm: pinctrl@6e80000 { + compatible = "qcom,sm8550-lpass-lpi-pinctrl"; + reg = <0 0x06e80000 0 0x20000>, + <0 0x0725a000 0 0x10000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lpass_tlmm 0 0 23>; + + clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "core", "audio"; + }; + + lpass_lpiaon_noc: interconnect@7400000 { + compatible = "qcom,sm8550-lpass-lpiaon-noc"; + reg = <0 0x07400000 0 0x19080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + lpass_lpicx_noc: interconnect@7430000 { + compatible = "qcom,sm8550-lpass-lpicx-noc"; + reg = <0 0x07430000 0 0x3a200>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + lpass_ag_noc: interconnect@7e40000 { + compatible = "qcom,sm8550-lpass-ag-noc"; + reg = <0 0x07e40000 0 0xe080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + sdhc_2: mmc@8804000 { + compatible = "qcom,sm8550-sdhci", "qcom,sdhci-msm-v5"; + reg = <0 0x08804000 0 0x1000>; + + interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "core", "xo"; + iommus = <&apps_smmu 0x540 0>; + qcom,dll-config = <0x0007642c>; + qcom,ddr-config = <0x80040868>; + power-domains = <&rpmhpd SM8550_CX>; + operating-points-v2 = <&sdhc2_opp_table>; + + interconnects = <&aggre2_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>; + interconnect-names = "sdhc-ddr", "cpu-sdhc"; + bus-width = <4>; + dma-coherent; + + /* Forbid SDR104/SDR50 - broken hw! */ + sdhci-caps-mask = <0x3 0>; + + status = "disabled"; + + sdhc2_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-202000000 { + opp-hz = /bits/ 64 <202000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + mdss: display-subsystem@ae00000 { + compatible = "qcom,sm8550-mdss"; + reg = <0 0x0ae00000 0 0x1000>; + reg-names = "mdss"; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + + resets = <&dispcc DISP_CC_MDSS_CORE_BCR>; + + power-domains = <&dispcc MDSS_GDSC>; + + interconnects = <&mmss_noc MASTER_MDP 0 &gem_noc SLAVE_LLCC 0>, + <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "mdp0-mem", "mdp1-mem"; + + iommus = <&apps_smmu 0x1c00 0x2>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + mdss_mdp: display-controller@ae01000 { + compatible = "qcom,sm8550-dpu"; + reg = <0 0x0ae01000 0 0x8f000>, + <0 0x0aeb0000 0 0x2008>; + reg-names = "mdp", "vbif"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", + "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + + power-domains = <&rpmhpd SM8550_MMCX>; + + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf2_out: endpoint { + remote-endpoint = <&mdss_dsi1_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-325000000 { + opp-hz = /bits/ 64 <325000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-375000000 { + opp-hz = /bits/ 64 <375000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-514000000 { + opp-hz = /bits/ 64 <514000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss_dsi0: dsi@ae94000 { + compatible = "qcom,sm8550-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0 0x0ae94000 0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + power-domains = <&rpmhpd SM8550_MMCX>; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; + + operating-points-v2 = <&mdss_dsi_opp_table>; + + phys = <&mdss_dsi0_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi0_out: endpoint { + }; + }; + }; + + mdss_dsi_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + mdss_dsi0_phy: phy@ae95000 { + compatible = "qcom,sm8550-dsi-phy-4nm"; + reg = <0 0x0ae95000 0 0x200>, + <0 0x0ae95200 0 0x280>, + <0 0x0ae95500 0 0x400>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + + mdss_dsi1: dsi@ae96000 { + compatible = "qcom,sm8550-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0 0x0ae96000 0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <5>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>, + <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK>, + <&dispcc DISP_CC_MDSS_ESC1_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + power-domains = <&rpmhpd SM8550_MMCX>; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>; + + operating-points-v2 = <&mdss_dsi_opp_table>; + + phys = <&mdss_dsi1_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi1_in: endpoint { + remote-endpoint = <&dpu_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi1_out: endpoint { + }; + }; + }; + }; + + mdss_dsi1_phy: phy@ae97000 { + compatible = "qcom,sm8550-dsi-phy-4nm"; + reg = <0 0x0ae97000 0 0x200>, + <0 0x0ae97200 0 0x280>, + <0 0x0ae97500 0 0x400>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + }; + + dispcc: clock-controller@af00000 { + compatible = "qcom,sm8550-dispcc"; + reg = <0 0x0af00000 0 0x20000>; + clocks = <&bi_tcxo_div2>, + <&bi_tcxo_ao_div2>, + <&gcc GCC_DISP_AHB_CLK>, + <&sleep_clk>, + <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>, + <&mdss_dsi1_phy 0>, + <&mdss_dsi1_phy 1>, + <0>, /* dp0 */ + <0>, + <0>, /* dp1 */ + <0>, + <0>, /* dp2 */ + <0>, + <0>, /* dp3 */ + <0>; + power-domains = <&rpmhpd SM8550_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + status = "disabled"; + }; + + usb_1_hsphy: phy@88e3000 { + compatible = "qcom,sm8550-snps-eusb2-phy"; + reg = <0x0 0x088e3000 0x0 0x154>; + #phy-cells = <0>; + + clocks = <&tcsr TCSR_USB2_CLKREF_EN>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + + status = "disabled"; + }; + + usb_dp_qmpphy: phy@88e8000 { + compatible = "qcom,sm8550-qmp-usb3-dp-phy"; + reg = <0x0 0x088e8000 0x0 0x3000>; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "aux", "ref", "com_aux", "usb3_pipe"; + + power-domains = <&gcc USB3_PHY_GDSC>; + + resets = <&gcc GCC_USB3_PHY_PRIM_BCR>, + <&gcc GCC_USB3_DP_PHY_PRIM_BCR>; + reset-names = "phy", "common"; + + #clock-cells = <1>; + #phy-cells = <1>; + + status = "disabled"; + }; + + usb_1: usb@a6f8800 { + compatible = "qcom,sm8550-dwc3", "qcom,dwc3"; + reg = <0x0 0x0a6f8800 0x0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&tcsr TCSR_USB3_CLKREF_EN>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "xo"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 15 IRQ_TYPE_EDGE_RISING>, + <&pdc 14 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "hs_phy_irq", + "ss_phy_irq", + "dm_hs_phy_irq", + "dp_hs_phy_irq"; + + power-domains = <&gcc USB30_PRIM_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + status = "disabled"; + + usb_1_dwc3: usb@a600000 { + compatible = "snps,dwc3"; + reg = <0x0 0x0a600000 0x0 0xcd00>; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x40 0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + snps,usb3_lpm_capable; + phys = <&usb_1_hsphy>, + <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + pdc: interrupt-controller@b220000 { + compatible = "qcom,sm8550-pdc", "qcom,pdc"; + reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>; + qcom,pdc-ranges = <0 480 94>, <94 609 31>, + <125 63 1>, <126 716 12>, + <138 251 5>; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + + tsens0: thermal-sensor@c271000 { + compatible = "qcom,sm8550-tsens", "qcom,tsens-v2"; + reg = <0 0x0c271000 0 0x1000>, /* TM */ + <0 0x0c222000 0 0x1000>; /* SROT */ + #qcom,sensors = <16>; + interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal-sensor@c272000 { + compatible = "qcom,sm8550-tsens", "qcom,tsens-v2"; + reg = <0 0x0c272000 0 0x1000>, /* TM */ + <0 0x0c223000 0 0x1000>; /* SROT */ + #qcom,sensors = <16>; + interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + tsens2: thermal-sensor@c273000 { + compatible = "qcom,sm8550-tsens", "qcom,tsens-v2"; + reg = <0 0x0c273000 0 0x1000>, /* TM */ + <0 0x0c224000 0 0x1000>; /* SROT */ + #qcom,sensors = <16>; + interrupts = <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + aoss_qmp: power-management@c300000 { + compatible = "qcom,sm8550-aoss-qmp", "qcom,aoss-qmp"; + reg = <0 0x0c300000 0 0x400>; + interrupt-parent = <&ipcc>; + interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>; + + #clock-cells = <0>; + }; + + sram@c3f0000 { + compatible = "qcom,rpmh-stats"; + reg = <0 0x0c3f0000 0 0x400>; + }; + + spmi_bus: spmi@c400000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0 0x0c400000 0 0x3000>, + <0 0x0c500000 0 0x4000000>, + <0 0x0c440000 0 0x80000>, + <0 0x0c4c0000 0 0x20000>, + <0 0x0c42d000 0 0x4000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + qcom,bus-id = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + tlmm: pinctrl@f000000 { + compatible = "qcom,sm8550-tlmm"; + reg = <0 0x0f100000 0 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 211>; + wakeup-parent = <&pdc>; + + hub_i2c0_data_clk: hub-i2c0-data-clk-state { + /* SDA, SCL */ + pins = "gpio16", "gpio17"; + function = "i2chub0_se0"; + drive-strength = <2>; + bias-pull-up; + }; + + hub_i2c1_data_clk: hub-i2c1-data-clk-state { + /* SDA, SCL */ + pins = "gpio18", "gpio19"; + function = "i2chub0_se1"; + drive-strength = <2>; + bias-pull-up; + }; + + hub_i2c2_data_clk: hub-i2c2-data-clk-state { + /* SDA, SCL */ + pins = "gpio20", "gpio21"; + function = "i2chub0_se2"; + drive-strength = <2>; + bias-pull-up; + }; + + hub_i2c3_data_clk: hub-i2c3-data-clk-state { + /* SDA, SCL */ + pins = "gpio22", "gpio23"; + function = "i2chub0_se3"; + drive-strength = <2>; + bias-pull-up; + }; + + hub_i2c4_data_clk: hub-i2c4-data-clk-state { + /* SDA, SCL */ + pins = "gpio4", "gpio5"; + function = "i2chub0_se4"; + drive-strength = <2>; + bias-pull-up; + }; + + hub_i2c5_data_clk: hub-i2c5-data-clk-state { + /* SDA, SCL */ + pins = "gpio6", "gpio7"; + function = "i2chub0_se5"; + drive-strength = <2>; + bias-pull-up; + }; + + hub_i2c6_data_clk: hub-i2c6-data-clk-state { + /* SDA, SCL */ + pins = "gpio8", "gpio9"; + function = "i2chub0_se6"; + drive-strength = <2>; + bias-pull-up; + }; + + hub_i2c7_data_clk: hub-i2c7-data-clk-state { + /* SDA, SCL */ + pins = "gpio10", "gpio11"; + function = "i2chub0_se7"; + drive-strength = <2>; + bias-pull-up; + }; + + hub_i2c8_data_clk: hub-i2c8-data-clk-state { + /* SDA, SCL */ + pins = "gpio206", "gpio207"; + function = "i2chub0_se8"; + drive-strength = <2>; + bias-pull-up; + }; + + hub_i2c9_data_clk: hub-i2c9-data-clk-state { + /* SDA, SCL */ + pins = "gpio84", "gpio85"; + function = "i2chub0_se9"; + drive-strength = <2>; + bias-pull-up; + }; + + pcie0_default_state: pcie0-default-state { + perst-pins { + pins = "gpio94"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq-pins { + pins = "gpio95"; + function = "pcie0_clk_req_n"; + drive-strength = <2>; + bias-pull-up; + }; + + wake-pins { + pins = "gpio96"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie1_default_state: pcie1-default-state { + perst-pins { + pins = "gpio97"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq-pins { + pins = "gpio98"; + function = "pcie1_clk_req_n"; + drive-strength = <2>; + bias-pull-up; + }; + + wake-pins { + pins = "gpio99"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + qup_i2c0_data_clk: qup-i2c0-data-clk-state { + /* SDA, SCL */ + pins = "gpio28", "gpio29"; + function = "qup1_se0"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c1_data_clk: qup-i2c1-data-clk-state { + /* SDA, SCL */ + pins = "gpio32", "gpio33"; + function = "qup1_se1"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c2_data_clk: qup-i2c2-data-clk-state { + /* SDA, SCL */ + pins = "gpio36", "gpio37"; + function = "qup1_se2"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c3_data_clk: qup-i2c3-data-clk-state { + /* SDA, SCL */ + pins = "gpio40", "gpio41"; + function = "qup1_se3"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c4_data_clk: qup-i2c4-data-clk-state { + /* SDA, SCL */ + pins = "gpio44", "gpio45"; + function = "qup1_se4"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c5_data_clk: qup-i2c5-data-clk-state { + /* SDA, SCL */ + pins = "gpio52", "gpio53"; + function = "qup1_se5"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c6_data_clk: qup-i2c6-data-clk-state { + /* SDA, SCL */ + pins = "gpio48", "gpio49"; + function = "qup1_se6"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c8_data_clk: qup-i2c8-data-clk-state { + scl-pins { + pins = "gpio57"; + function = "qup2_se0_l1_mira"; + drive-strength = <2>; + bias-pull-up; + }; + + sda-pins { + pins = "gpio56"; + function = "qup2_se0_l0_mira"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + qup_i2c9_data_clk: qup-i2c9-data-clk-state { + /* SDA, SCL */ + pins = "gpio60", "gpio61"; + function = "qup2_se1"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c10_data_clk: qup-i2c10-data-clk-state { + /* SDA, SCL */ + pins = "gpio64", "gpio65"; + function = "qup2_se2"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c11_data_clk: qup-i2c11-data-clk-state { + /* SDA, SCL */ + pins = "gpio68", "gpio69"; + function = "qup2_se3"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c12_data_clk: qup-i2c12-data-clk-state { + /* SDA, SCL */ + pins = "gpio2", "gpio3"; + function = "qup2_se4"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c13_data_clk: qup-i2c13-data-clk-state { + /* SDA, SCL */ + pins = "gpio80", "gpio81"; + function = "qup2_se5"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c15_data_clk: qup-i2c15-data-clk-state { + /* SDA, SCL */ + pins = "gpio72", "gpio106"; + function = "qup2_se7"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi0_cs: qup-spi0-cs-state { + cs-pins { + pins = "gpio31"; + function = "qup1_se0"; + }; + }; + + qup_spi0_data_clk: qup-spi0-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio28", "gpio29", "gpio30"; + function = "qup1_se0"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi1_cs: qup-spi1-cs-state { + pins = "gpio35"; + function = "qup1_se1"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi1_data_clk: qup-spi1-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio32", "gpio33", "gpio34"; + function = "qup1_se1"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi2_cs: qup-spi2-cs-state { + pins = "gpio39"; + function = "qup1_se2"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi2_data_clk: qup-spi2-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio36", "gpio37", "gpio38"; + function = "qup1_se2"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi3_cs: qup-spi3-cs-state { + pins = "gpio43"; + function = "qup1_se3"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi3_data_clk: qup-spi3-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio40", "gpio41", "gpio42"; + function = "qup1_se3"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi4_cs: qup-spi4-cs-state { + pins = "gpio47"; + function = "qup1_se4"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi4_data_clk: qup-spi4-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio44", "gpio45", "gpio46"; + function = "qup1_se4"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi5_cs: qup-spi5-cs-state { + pins = "gpio55"; + function = "qup1_se5"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi5_data_clk: qup-spi5-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio52", "gpio53", "gpio54"; + function = "qup1_se5"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi6_cs: qup-spi6-cs-state { + pins = "gpio51"; + function = "qup1_se6"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi6_data_clk: qup-spi6-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio48", "gpio49", "gpio50"; + function = "qup1_se6"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi8_cs: qup-spi8-cs-state { + pins = "gpio59"; + function = "qup2_se0_l3_mira"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi8_data_clk: qup-spi8-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio56", "gpio57", "gpio58"; + function = "qup2_se0_l2_mira"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi9_cs: qup-spi9-cs-state { + pins = "gpio63"; + function = "qup2_se1"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi9_data_clk: qup-spi9-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio60", "gpio61", "gpio62"; + function = "qup2_se1"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi10_cs: qup-spi10-cs-state { + pins = "gpio67"; + function = "qup2_se2"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi10_data_clk: qup-spi10-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio64", "gpio65", "gpio66"; + function = "qup2_se2"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi11_cs: qup-spi11-cs-state { + pins = "gpio71"; + function = "qup2_se3"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi11_data_clk: qup-spi11-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio68", "gpio69", "gpio70"; + function = "qup2_se3"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi12_cs: qup-spi12-cs-state { + pins = "gpio119"; + function = "qup2_se4"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi12_data_clk: qup-spi12-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio2", "gpio3", "gpio118"; + function = "qup2_se4"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi13_cs: qup-spi13-cs-state { + pins = "gpio83"; + function = "qup2_se5"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi13_data_clk: qup-spi13-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio80", "gpio81", "gpio82"; + function = "qup2_se5"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi15_cs: qup-spi15-cs-state { + pins = "gpio75"; + function = "qup2_se7"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi15_data_clk: qup-spi15-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio72", "gpio106", "gpio74"; + function = "qup2_se7"; + drive-strength = <6>; + bias-disable; + }; + + qup_uart7_default: qup-uart7-default-state { + /* TX, RX */ + pins = "gpio26", "gpio27"; + function = "qup1_se7"; + drive-strength = <2>; + bias-disable; + }; + + sdc2_sleep: sdc2-sleep-state { + clk-pins { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd-pins { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data-pins { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <2>; + }; + }; + + sdc2_default: sdc2-default-state { + clk-pins { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <16>; + }; + + cmd-pins { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data-pins { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + }; + }; + + apps_smmu: iommu@15000000 { + compatible = "qcom,sm8550-smmu-500", "qcom,smmu-500", "arm,mmu-500"; + reg = <0 0x15000000 0 0x100000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>; + }; + + intc: interrupt-controller@17100000 { + compatible = "arm,gic-v3"; + reg = <0 0x17100000 0 0x10000>, /* GICD */ + <0 0x17180000 0 0x200000>; /* GICR * 8 */ + ranges; + #interrupt-cells = <3>; + interrupt-controller; + #redistributor-regions = <1>; + redistributor-stride = <0 0x40000>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>; + #address-cells = <2>; + #size-cells = <2>; + + gic_its: msi-controller@17140000 { + compatible = "arm,gic-v3-its"; + reg = <0 0x17140000 0 0x20000>; + msi-controller; + #msi-cells = <1>; + }; + }; + + timer@17420000 { + compatible = "arm,armv7-timer-mem"; + reg = <0 0x17420000 0 0x1000>; + ranges = <0 0 0 0x20000000>; + #address-cells = <1>; + #size-cells = <1>; + + frame@17421000 { + reg = <0x17421000 0x1000>, + <0x17422000 0x1000>; + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + }; + + frame@17423000 { + reg = <0x17423000 0x1000>; + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@17425000 { + reg = <0x17425000 0x1000>; + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@17427000 { + reg = <0x17427000 0x1000>; + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@17429000 { + reg = <0x17429000 0x1000>; + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@1742b000 { + reg = <0x1742b000 0x1000>; + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@1742d000 { + reg = <0x1742d000 0x1000>; + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + apps_rsc: rsc@17a00000 { + label = "apps_rsc"; + compatible = "qcom,rpmh-rsc"; + reg = <0 0x17a00000 0 0x10000>, + <0 0x17a10000 0 0x10000>, + <0 0x17a20000 0 0x10000>, + <0 0x17a30000 0 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2", "drv-3"; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = <ACTIVE_TCS 3>, <SLEEP_TCS 2>, + <WAKE_TCS 2>, <CONTROL_TCS 0>; + + apps_bcm_voter: bcm-voter { + compatible = "qcom,bcm-voter"; + }; + + rpmhcc: clock-controller { + compatible = "qcom,sm8550-rpmh-clk"; + #clock-cells = <1>; + clock-names = "xo"; + clocks = <&xo_board>; + }; + + rpmhpd: power-controller { + compatible = "qcom,sm8550-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp1 { + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; + }; + + rpmhpd_opp_min_svs: opp2 { + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + + rpmhpd_opp_low_svs: opp3 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + + rpmhpd_opp_svs: opp4 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + rpmhpd_opp_svs_l1: opp5 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + rpmhpd_opp_nom: opp6 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + rpmhpd_opp_nom_l1: opp7 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + rpmhpd_opp_nom_l2: opp8 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; + }; + + rpmhpd_opp_turbo: opp9 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + }; + + rpmhpd_opp_turbo_l1: opp10 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + }; + }; + }; + }; + + cpufreq_hw: cpufreq@17d91000 { + compatible = "qcom,sm8550-cpufreq-epss", "qcom,cpufreq-epss"; + reg = <0 0x17d91000 0 0x1000>, + <0 0x17d92000 0 0x1000>, + <0 0x17d93000 0 0x1000>; + reg-names = "freq-domain0", "freq-domain1", "freq-domain2"; + clocks = <&bi_tcxo_div2>, <&gcc GCC_GPLL0>; + clock-names = "xo", "alternate"; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1", "dcvsh-irq-2"; + #freq-domain-cells = <1>; + }; + + pmu@24091000 { + compatible = "qcom,sm8550-llcc-bwmon", "qcom,sc7280-llcc-bwmon"; + reg = <0 0x24091000 0 0x1000>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&mc_virt MASTER_LLCC 3 &mc_virt SLAVE_EBI1 3>; + + operating-points-v2 = <&llcc_bwmon_opp_table>; + + llcc_bwmon_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-0 { + opp-peak-kBps = <2086000>; + }; + + opp-1 { + opp-peak-kBps = <2929000>; + }; + + opp-2 { + opp-peak-kBps = <5931000>; + }; + + opp-3 { + opp-peak-kBps = <6515000>; + }; + + opp-4 { + opp-peak-kBps = <7980000>; + }; + + opp-5 { + opp-peak-kBps = <10437000>; + }; + + opp-6 { + opp-peak-kBps = <12157000>; + }; + + opp-7 { + opp-peak-kBps = <14060000>; + }; + + opp-8 { + opp-peak-kBps = <16113000>; + }; + }; + }; + + pmu@240b6400 { + compatible = "qcom,sm8550-cpu-bwmon", "qcom,msm8998-bwmon"; + reg = <0 0x240b6400 0 0x600>; + interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &gem_noc SLAVE_LLCC 3>; + + operating-points-v2 = <&cpu_bwmon_opp_table>; + + cpu_bwmon_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-0 { + opp-peak-kBps = <4577000>; + }; + + opp-1 { + opp-peak-kBps = <7110000>; + }; + + opp-2 { + opp-peak-kBps = <9155000>; + }; + + opp-3 { + opp-peak-kBps = <12298000>; + }; + + opp-4 { + opp-peak-kBps = <14236000>; + }; + + opp-5 { + opp-peak-kBps = <16265000>; + }; + }; + }; + + gem_noc: interconnect@24100000 { + compatible = "qcom,sm8550-gem-noc"; + reg = <0 0x24100000 0 0xbb800>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system-cache-controller@25000000 { + compatible = "qcom,sm8550-llcc"; + reg = <0 0x25000000 0 0x800000>, + <0 0x25800000 0 0x200000>; + reg-names = "llcc_base", "llcc_broadcast_base"; + interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; + }; + + remoteproc_adsp: remoteproc@30000000 { + compatible = "qcom,sm8550-adsp-pas"; + reg = <0x0 0x30000000 0x0 0x100>; + + interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SM8550_LCX>, + <&rpmhpd SM8550_LMX>; + power-domain-names = "lcx", "lmx"; + + interconnects = <&lpass_lpicx_noc MASTER_LPASS_PROC 0 &mc_virt SLAVE_EBI1 0>; + + memory-region = <&adspslpi_mem>, <&q6_adsp_dtb_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_adsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + remoteproc_adsp_glink: glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "lpass"; + qcom,remote-pid = <2>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "adsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x1003 0x80>, + <&apps_smmu 0x1063 0x0>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x1004 0x80>, + <&apps_smmu 0x1064 0x0>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x1005 0x80>, + <&apps_smmu 0x1065 0x0>; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + iommus = <&apps_smmu 0x1006 0x80>, + <&apps_smmu 0x1066 0x0>; + }; + + compute-cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + iommus = <&apps_smmu 0x1007 0x80>, + <&apps_smmu 0x1067 0x0>; + }; + }; + + gpr { + compatible = "qcom,gpr"; + qcom,glink-channels = "adsp_apps"; + qcom,domain = <GPR_DOMAIN_ID_ADSP>; + qcom,intents = <512 20>; + #address-cells = <1>; + #size-cells = <0>; + + q6apm: service@1 { + compatible = "qcom,q6apm"; + reg = <GPR_APM_MODULE_IID>; + #sound-dai-cells = <0>; + qcom,protection-domain = "avs/audio", + "msm/adsp/audio_pd"; + + q6apmdai: dais { + compatible = "qcom,q6apm-dais"; + iommus = <&apps_smmu 0x1001 0x80>, + <&apps_smmu 0x1061 0x0>; + }; + + q6apmbedai: bedais { + compatible = "qcom,q6apm-lpass-dais"; + #sound-dai-cells = <1>; + }; + }; + + q6prm: service@2 { + compatible = "qcom,q6prm"; + reg = <GPR_PRM_MODULE_IID>; + qcom,protection-domain = "avs/audio", + "msm/adsp/audio_pd"; + + q6prmcc: clock-controller { + compatible = "qcom,q6prm-lpass-clocks"; + #clock-cells = <2>; + }; + }; + }; + }; + }; + + nsp_noc: interconnect@320c0000 { + compatible = "qcom,sm8550-nsp-noc"; + reg = <0 0x320c0000 0 0xe080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + remoteproc_cdsp: remoteproc@32300000 { + compatible = "qcom,sm8550-cdsp-pas"; + reg = <0x0 0x32300000 0x0 0x1400000>; + + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SM8550_CX>, + <&rpmhpd SM8550_MXC>, + <&rpmhpd SM8550_NSP>; + power-domain-names = "cx", "mxc", "nsp"; + + interconnects = <&nsp_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>; + + memory-region = <&cdsp_mem>, <&q6_cdsp_dtb_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_cdsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "cdsp"; + qcom,remote-pid = <5>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "cdsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x1961 0x0>, + <&apps_smmu 0x0c01 0x20>, + <&apps_smmu 0x19c1 0x10>; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x1962 0x0>, + <&apps_smmu 0x0c02 0x20>, + <&apps_smmu 0x19c2 0x10>; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x1963 0x0>, + <&apps_smmu 0x0c03 0x20>, + <&apps_smmu 0x19c3 0x10>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x1964 0x0>, + <&apps_smmu 0x0c04 0x20>, + <&apps_smmu 0x19c4 0x10>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x1965 0x0>, + <&apps_smmu 0x0c05 0x20>, + <&apps_smmu 0x19c5 0x10>; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + iommus = <&apps_smmu 0x1966 0x0>, + <&apps_smmu 0x0c06 0x20>, + <&apps_smmu 0x19c6 0x10>; + }; + + compute-cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + iommus = <&apps_smmu 0x1967 0x0>, + <&apps_smmu 0x0c07 0x20>, + <&apps_smmu 0x19c7 0x10>; + }; + + compute-cb@8 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <8>; + iommus = <&apps_smmu 0x1968 0x0>, + <&apps_smmu 0x0c08 0x20>, + <&apps_smmu 0x19c8 0x10>; + }; + + /* note: secure cb9 in downstream */ + }; + }; + }; + }; + + thermal-zones { + aoss0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 0>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-config { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpuss0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 1>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-config { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpuss1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 2>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-config { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpuss2-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 3>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-config { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpuss3-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 4>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-config { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpu3-top-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 5>; + + trips { + cpu3_top_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_top_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_top_crit: cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu3-bottom-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 6>; + + trips { + cpu3_bottom_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_bottom_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_bottom_crit: cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu4-top-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 7>; + + trips { + cpu4_top_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_top_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_top_crit: cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu4-bottom-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 8>; + + trips { + cpu4_bottom_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_bottom_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_bottom_crit: cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu5-top-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 9>; + + trips { + cpu5_top_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_top_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_top_crit: cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu5-bottom-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 10>; + + trips { + cpu5_bottom_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_bottom_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_bottom_crit: cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu6-top-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 11>; + + trips { + cpu6_top_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_top_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_top_crit: cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu6-bottom-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 12>; + + trips { + cpu6_bottom_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_bottom_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_bottom_crit: cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu7-top-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 13>; + + trips { + cpu7_top_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_top_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_top_crit: cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu7-middle-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 14>; + + trips { + cpu7_middle_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_middle_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_middle_crit: cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu7-bottom-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 15>; + + trips { + cpu7_bottom_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_bottom_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_bottom_crit: cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + aoss1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 0>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-config { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpu0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 1>; + + trips { + cpu0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_crit: cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 2>; + + trips { + cpu1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_crit: cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 3>; + + trips { + cpu2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_crit: cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cdsp0-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens2 4>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-config { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + cdsp0_junction_config: junction-config { + temperature = <95000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cdsp1-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens2 5>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-config { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + cdsp1_junction_config: junction-config { + temperature = <95000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cdsp2-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens2 6>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-config { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + cdsp2_junction_config: junction-config { + temperature = <95000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cdsp3-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens2 7>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-config { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + cdsp3_junction_config: junction-config { + temperature = <95000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + video-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 8>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-config { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + mem-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens1 9>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + ddr_config0: ddr0-config { + temperature = <90000>; + hysteresis = <5000>; + type = "passive"; + }; + + reset-mon-config { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + modem0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 10>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + mdmss0_config0: mdmss0-config0 { + temperature = <102000>; + hysteresis = <3000>; + type = "passive"; + }; + + mdmss0_config1: mdmss0-config1 { + temperature = <105000>; + hysteresis = <3000>; + type = "passive"; + }; + + reset-mon-config { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + modem1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 11>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + mdmss1_config0: mdmss1-config0 { + temperature = <102000>; + hysteresis = <3000>; + type = "passive"; + }; + + mdmss1_config1: mdmss1-config1 { + temperature = <105000>; + hysteresis = <3000>; + type = "passive"; + }; + + reset-mon-config { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + modem2-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 12>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + mdmss2_config0: mdmss2-config0 { + temperature = <102000>; + hysteresis = <3000>; + type = "passive"; + }; + + mdmss2_config1: mdmss2-config1 { + temperature = <105000>; + hysteresis = <3000>; + type = "passive"; + }; + + reset-mon-config { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + modem3-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 13>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + mdmss3_config0: mdmss3-config0 { + temperature = <102000>; + hysteresis = <3000>; + type = "passive"; + }; + + mdmss3_config1: mdmss3-config1 { + temperature = <105000>; + hysteresis = <3000>; + type = "passive"; + }; + + reset-mon-config { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + camera0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 14>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-config { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + camera1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 15>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-config { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + aoss2-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens2 0>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-config { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + gpuss-0-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens2 1>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-config { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + gpu0_junction_config: junction-config { + temperature = <95000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + gpuss-1-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens2 2>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-config { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + gpu1_junction_config: junction-config { + temperature = <95000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + gpuss-2-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens2 3>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-config { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + gpu2_junction_config: junction-config { + temperature = <95000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + gpuss-3-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens2 4>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-config { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + gpu3_junction_config: junction-config { + temperature = <95000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + gpuss-4-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens2 5>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-config { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + gpu4_junction_config: junction-config { + temperature = <95000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + gpuss-5-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens2 6>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-config { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + gpu5_junction_config: junction-config { + temperature = <95000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + gpuss-6-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens2 7>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-config { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + gpu6_junction_config: junction-config { + temperature = <95000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + gpuss-7-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens2 8>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-config { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + gpu7_junction_config: junction-config { + temperature = <95000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; diff --git a/arch/arm64/boot/dts/realtek/rtd16xx.dtsi b/arch/arm64/boot/dts/realtek/rtd16xx.dtsi index afba5f04c8ec..bf4d9e917925 100644 --- a/arch/arm64/boot/dts/realtek/rtd16xx.dtsi +++ b/arch/arm64/boot/dts/realtek/rtd16xx.dtsi @@ -195,7 +195,7 @@ }; &iso { - uart0: serial0@800 { + uart0: serial@800 { compatible = "snps,dw-apb-uart"; reg = <0x800 0x400>; reg-shift = <2>; @@ -207,7 +207,7 @@ }; &misc { - uart1: serial1@200 { + uart1: serial@200 { compatible = "snps,dw-apb-uart"; reg = <0x200 0x400>; reg-shift = <2>; @@ -217,7 +217,7 @@ status = "disabled"; }; - uart2: serial2@400 { + uart2: serial@400 { compatible = "snps,dw-apb-uart"; reg = <0x400 0x400>; reg-shift = <2>; diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi index 8166e3c1ff4e..2e9927b97732 100644 --- a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi +++ b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi @@ -367,7 +367,7 @@ assigned-clocks = <&versaclock6_bb 1>, <&versaclock6_bb 2>, <&versaclock6_bb 3>, <&versaclock6_bb 4>; - assigned-clock-rates = <24000000>, <24000000>, <24000000>, + assigned-clock-rates = <24000000>, <24000000>, <24576000>, <24576000>; OUT1 { @@ -437,20 +437,6 @@ }; }; - /* 0 - lcd_reset */ - /* 1 - lcd_pwr */ - /* 2 - lcd_select */ - /* 3 - backlight-enable */ - /* 4 - Touch_shdwn */ - /* 5 - LCD_H_pol */ - /* 6 - lcd_V_pol */ - gpio_exp1: gpio@20 { - compatible = "onnn,pca9654"; - reg = <0x20>; - gpio-controller; - #gpio-cells = <2>; - }; - touchscreen@26 { compatible = "ilitek,ili2117"; reg = <0x26>; @@ -482,6 +468,16 @@ }; }; }; + + gpio_exp1: gpio@70 { + compatible = "nxp,pca9538"; + reg = <0x70>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "lcd_reset", "lcd_pwr", "lcd_select", + "backlight-enable", "Touch_shdwn", + "LCD_H_pol", "lcd_V_pol"; + }; }; &lvds0 { @@ -638,6 +634,25 @@ #clock-cells = <1>; clock-frequency = <11289600>; + /* Reference versaclock instead of audio_clk_a */ + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, + <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, + <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, + <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, + <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, + <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, + <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, + <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, + <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, + <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, + <&versaclock6_bb 4>, <&audio_clk_b>, + <&audio_clk_c>, + <&cpg CPG_CORE CPG_AUDIO_CLK_I>; + status = "okay"; ports { diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi index d3fc8ffd5b4c..68b04e56ae56 100644 --- a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi +++ b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi @@ -59,7 +59,7 @@ status = "okay"; phy0: ethernet-phy@0 { - compatible = "ethernet-phy-id004d.d074", + compatible = "ethernet-phy-id0022.1640", "ethernet-phy-ieee802.3-c22"; reg = <0>; interrupt-parent = <&gpio2>; diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-beacon-rzg2m-kit.dts b/arch/arm64/boot/dts/renesas/r8a774a1-beacon-rzg2m-kit.dts index 9ae67263c0df..24da6ee6eccd 100644 --- a/arch/arm64/boot/dts/renesas/r8a774a1-beacon-rzg2m-kit.dts +++ b/arch/arm64/boot/dts/renesas/r8a774a1-beacon-rzg2m-kit.dts @@ -58,24 +58,3 @@ clock-names = "du.0", "du.1", "du.2", "dclkin.0", "dclkin.1", "dclkin.2"; }; - -/* Reference versaclock instead of audio_clk_a */ -&rcar_sound { - clocks = <&cpg CPG_MOD 1005>, - <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, - <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, - <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, - <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, - <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, - <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, - <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, - <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, - <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, - <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, - <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, - <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, - <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, - <&versaclock6_bb 4>, <&audio_clk_b>, - <&audio_clk_c>, - <&cpg CPG_CORE R8A774A1_CLK_S0D4>; -}; diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi index 7e643243c3be..c21b78685123 100644 --- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi @@ -1678,7 +1678,7 @@ rcar_sound: sound@ec500000 { /* - * #sound-dai-cells is required + * #sound-dai-cells is required if simple-card * * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>; * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>; diff --git a/arch/arm64/boot/dts/renesas/r8a774b1-beacon-rzg2n-kit.dts b/arch/arm64/boot/dts/renesas/r8a774b1-beacon-rzg2n-kit.dts index 89d708346ba8..8b9df6afffde 100644 --- a/arch/arm64/boot/dts/renesas/r8a774b1-beacon-rzg2n-kit.dts +++ b/arch/arm64/boot/dts/renesas/r8a774b1-beacon-rzg2n-kit.dts @@ -14,6 +14,14 @@ compatible = "beacon,beacon-rzg2n", "renesas,r8a774b1"; aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &iic_pmic; serial0 = &scif2; serial1 = &hscif0; serial2 = &hscif1; @@ -46,24 +54,3 @@ clock-names = "du.0", "du.1", "du.3", "dclkin.0", "dclkin.1", "dclkin.3"; }; - -/* Reference versaclock instead of audio_clk_a */ -&rcar_sound { - clocks = <&cpg CPG_MOD 1005>, - <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, - <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, - <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, - <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, - <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, - <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, - <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, - <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, - <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, - <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, - <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, - <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, - <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, - <&versaclock6_bb 4>, <&audio_clk_b>, - <&audio_clk_c>, - <&cpg CPG_CORE R8A774B1_CLK_S0D4>; -}; diff --git a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi index d541b48c7e38..82216ce7a92a 100644 --- a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi @@ -1562,7 +1562,7 @@ rcar_sound: sound@ec500000 { /* - * #sound-dai-cells is required + * #sound-dai-cells is required if simple-card * * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>; * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>; diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi index 151e32ac0368..e21653d86228 100644 --- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi @@ -1317,7 +1317,7 @@ rcar_sound: sound@ec500000 { /* - * #sound-dai-cells is required + * #sound-dai-cells is required if simple-card * * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>; * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>; diff --git a/arch/arm64/boot/dts/renesas/r8a774e1-beacon-rzg2h-kit.dts b/arch/arm64/boot/dts/renesas/r8a774e1-beacon-rzg2h-kit.dts index 3e9ced3b2d33..146f78cb6f19 100644 --- a/arch/arm64/boot/dts/renesas/r8a774e1-beacon-rzg2h-kit.dts +++ b/arch/arm64/boot/dts/renesas/r8a774e1-beacon-rzg2h-kit.dts @@ -14,6 +14,14 @@ compatible = "beacon,beacon-rzg2h", "renesas,r8a774e1"; aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &iic_pmic; serial0 = &scif2; serial1 = &hscif0; serial2 = &hscif1; @@ -51,24 +59,3 @@ clock-names = "du.0", "du.1", "du.3", "dclkin.0", "dclkin.1", "dclkin.3"; }; - -/* Reference versaclock instead of audio_clk_a */ -&rcar_sound { - clocks = <&cpg CPG_MOD 1005>, - <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, - <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, - <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, - <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, - <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, - <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, - <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, - <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, - <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, - <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, - <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, - <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, - <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, - <&versaclock6_bb 4>, <&audio_clk_b>, - <&audio_clk_c>, - <&cpg CPG_CORE R8A774E1_CLK_S0D4>; -}; diff --git a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi index c5a0e7866b2f..2828e05b40b3 100644 --- a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi @@ -1774,7 +1774,7 @@ rcar_sound: sound@ec500000 { /* - * #sound-dai-cells is required + * #sound-dai-cells is required if simple-card * * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>; * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>; diff --git a/arch/arm64/boot/dts/renesas/r8a77951.dtsi b/arch/arm64/boot/dts/renesas/r8a77951.dtsi index 07c8763c1e77..f770d160e948 100644 --- a/arch/arm64/boot/dts/renesas/r8a77951.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77951.dtsi @@ -1998,7 +1998,7 @@ rcar_sound: sound@ec500000 { /* - * #sound-dai-cells is required + * #sound-dai-cells is required if simple-card * * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>; * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>; diff --git a/arch/arm64/boot/dts/renesas/r8a77960.dtsi b/arch/arm64/boot/dts/renesas/r8a77960.dtsi index 1424d4ad941f..09c61696f7fb 100644 --- a/arch/arm64/boot/dts/renesas/r8a77960.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77960.dtsi @@ -1870,7 +1870,7 @@ rcar_sound: sound@ec500000 { /* - * #sound-dai-cells is required + * #sound-dai-cells is required if simple-card * * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>; * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>; diff --git a/arch/arm64/boot/dts/renesas/r8a77961.dtsi b/arch/arm64/boot/dts/renesas/r8a77961.dtsi index 3c744b7d0dc4..59a18dfcb8cc 100644 --- a/arch/arm64/boot/dts/renesas/r8a77961.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77961.dtsi @@ -1750,7 +1750,7 @@ rcar_sound: sound@ec500000 { /* - * #sound-dai-cells is required + * #sound-dai-cells is required if simple-card * * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>; * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>; diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi index 997f29521f66..9b4f7ad95ca8 100644 --- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi @@ -1733,7 +1733,7 @@ rcar_sound: sound@ec500000 { /* - * #sound-dai-cells is required + * #sound-dai-cells is required if simple-card * * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>; * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>; diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts index 004a5eacd460..405404c0843d 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts +++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts @@ -287,6 +287,9 @@ }; &pfc { + pinctrl-0 = <&scif_clk_pins>; + pinctrl-names = "default"; + avb_pins: avb0 { groups = "avb0_mdio", "avb0_rgmii", "avb0_txcrefclk"; function = "avb0"; @@ -316,6 +319,11 @@ groups = "scif0_data"; function = "scif0"; }; + + scif_clk_pins: scif_clk { + groups = "scif_clk_b"; + function = "scif_clk"; + }; }; &rpc { @@ -391,3 +399,7 @@ status = "okay"; }; + +&scif_clk { + clock-frequency = <14745600>; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a77980a-condor-i.dts b/arch/arm64/boot/dts/renesas/r8a77980a-condor-i.dts index 9f488dea0f34..53fc21709345 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980a-condor-i.dts +++ b/arch/arm64/boot/dts/renesas/r8a77980a-condor-i.dts @@ -13,3 +13,7 @@ model = "Renesas Condor-I board based on r8a77980A (ES2.0)"; compatible = "renesas,condor-i", "renesas,r8a77980a", "renesas,r8a77980"; }; + +&mmc0 { + mmc-hs400-1_8v; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi index 3053b4b21497..d4718f144e33 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi @@ -1469,7 +1469,7 @@ rcar_sound: sound@ec500000 { /* - * #sound-dai-cells is required + * #sound-dai-cells is required if simple-card * * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>; * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>; diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi index f040d03e0a87..e25024a7b66c 100644 --- a/arch/arm64/boot/dts/renesas/r8a77995.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi @@ -1037,7 +1037,7 @@ rcar_sound: sound@ec500000 { /* - * #sound-dai-cells is required + * #sound-dai-cells is required if simple-card * * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>; * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>; diff --git a/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi b/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi index 045d70535519..dd8e0e159526 100644 --- a/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi @@ -5,6 +5,7 @@ * Copyright (C) 2021 Renesas Electronics Corp. */ +#include <dt-bindings/gpio/gpio.h> #include "r8a779f0.dtsi" / { @@ -32,6 +33,12 @@ reg = <0x4 0x80000000 0x0 0x80000000>; }; + rc21012_ufs: clk-rc21012-ufs { + compatible = "fixed-clock"; + clock-frequency = <38400000>; + #clock-cells = <0>; + }; + reg_1p8v: regulator-1p8v { compatible = "regulator-fixed"; regulator-name = "fixed-1.8V"; @@ -67,6 +74,21 @@ status = "okay"; }; +&i2c0 { + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + gpio_exp_20: gpio@20 { + compatible = "ti,tca9554"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + &i2c4 { pinctrl-0 = <&i2c4_pins>; pinctrl-names = "default"; @@ -112,6 +134,11 @@ function = "hscif0"; }; + i2c0_pins: i2c0 { + groups = "i2c0"; + function = "i2c0"; + }; + i2c4_pins: i2c4 { groups = "i2c4"; function = "i2c4"; @@ -150,3 +177,14 @@ &scif_clk { clock-frequency = <24000000>; }; + +&ufs { + status = "okay"; +}; + +&ufs30_clk { + compatible = "gpio-gate-clock"; + clocks = <&rc21012_ufs>; + enable-gpios = <&gpio_exp_20 4 GPIO_ACTIVE_LOW>; + /delete-property/ clock-frequency; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a779f0.dtsi b/arch/arm64/boot/dts/renesas/r8a779f0.dtsi index 67a4f2d4480d..f20b612b2b9a 100644 --- a/arch/arm64/boot/dts/renesas/r8a779f0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779f0.dtsi @@ -14,6 +14,60 @@ #address-cells = <2>; #size-cells = <2>; + cluster01_opp: opp-table-0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <880000>; + clock-latency-ns = <500000>; + }; + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <880000>; + clock-latency-ns = <500000>; + }; + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <880000>; + clock-latency-ns = <500000>; + }; + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <880000>; + clock-latency-ns = <500000>; + opp-suspend; + }; + }; + + cluster23_opp: opp-table-1 { + compatible = "operating-points-v2"; + opp-shared; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <880000>; + clock-latency-ns = <500000>; + }; + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <880000>; + clock-latency-ns = <500000>; + }; + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <880000>; + clock-latency-ns = <500000>; + }; + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <880000>; + clock-latency-ns = <500000>; + opp-suspend; + }; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -65,6 +119,7 @@ enable-method = "psci"; cpu-idle-states = <&CPU_SLEEP_0>; clocks = <&cpg CPG_CORE R8A779F0_CLK_Z0>; + operating-points-v2 = <&cluster01_opp>; }; a55_1: cpu@100 { @@ -76,6 +131,7 @@ enable-method = "psci"; cpu-idle-states = <&CPU_SLEEP_0>; clocks = <&cpg CPG_CORE R8A779F0_CLK_Z0>; + operating-points-v2 = <&cluster01_opp>; }; a55_2: cpu@10000 { @@ -87,6 +143,7 @@ enable-method = "psci"; cpu-idle-states = <&CPU_SLEEP_0>; clocks = <&cpg CPG_CORE R8A779F0_CLK_Z0>; + operating-points-v2 = <&cluster01_opp>; }; a55_3: cpu@10100 { @@ -98,6 +155,7 @@ enable-method = "psci"; cpu-idle-states = <&CPU_SLEEP_0>; clocks = <&cpg CPG_CORE R8A779F0_CLK_Z0>; + operating-points-v2 = <&cluster01_opp>; }; a55_4: cpu@20000 { @@ -109,6 +167,7 @@ enable-method = "psci"; cpu-idle-states = <&CPU_SLEEP_0>; clocks = <&cpg CPG_CORE R8A779F0_CLK_Z1>; + operating-points-v2 = <&cluster23_opp>; }; a55_5: cpu@20100 { @@ -120,6 +179,7 @@ enable-method = "psci"; cpu-idle-states = <&CPU_SLEEP_0>; clocks = <&cpg CPG_CORE R8A779F0_CLK_Z1>; + operating-points-v2 = <&cluster23_opp>; }; a55_6: cpu@30000 { @@ -131,6 +191,7 @@ enable-method = "psci"; cpu-idle-states = <&CPU_SLEEP_0>; clocks = <&cpg CPG_CORE R8A779F0_CLK_Z1>; + operating-points-v2 = <&cluster23_opp>; }; a55_7: cpu@30100 { @@ -142,6 +203,7 @@ enable-method = "psci"; cpu-idle-states = <&CPU_SLEEP_0>; clocks = <&cpg CPG_CORE R8A779F0_CLK_Z1>; + operating-points-v2 = <&cluster23_opp>; }; L3_CA55_0: cache-controller-0 { @@ -989,6 +1051,7 @@ power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; resets = <&cpg 706>; max-frequency = <200000000>; + iommus = <&ipmmu_ds0 32>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi index c10740aee9f6..bb4a5270f71b 100644 --- a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi @@ -97,6 +97,27 @@ reg = <0x6 0x00000000 0x1 0x00000000>; }; + mini-dp-con { + compatible = "dp-connector"; + label = "CN5"; + type = "mini"; + + port { + mini_dp_con_in: endpoint { + remote-endpoint = <&sn65dsi86_out>; + }; + }; + }; + + reg_1p2v: regulator-1p2v { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-boot-on; + regulator-always-on; + }; + reg_1p8v: regulator-1p8v { compatible = "regulator-fixed"; regulator-name = "fixed-1.8V"; @@ -114,6 +135,12 @@ regulator-boot-on; regulator-always-on; }; + + sn65dsi86_refclk: clk-x6 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <38400000>; + }; }; &avb0 { @@ -134,6 +161,23 @@ }; }; +&dsi0 { + status = "okay"; + + ports { + port@1 { + dsi0_out: endpoint { + remote-endpoint = <&sn65dsi86_in>; + data-lanes = <1 2 3 4>; + }; + }; + }; +}; + +&du { + status = "okay"; +}; + &extal_clk { clock-frequency = <16666666>; }; @@ -172,6 +216,51 @@ }; }; +&i2c1 { + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + bridge@2c { + compatible = "ti,sn65dsi86"; + reg = <0x2c>; + + clocks = <&sn65dsi86_refclk>; + clock-names = "refclk"; + + interrupt-parent = <&intc_ex>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + + enable-gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; + + vccio-supply = <®_1p8v>; + vpll-supply = <®_1p8v>; + vcca-supply = <®_1p2v>; + vcc-supply = <®_1p2v>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + sn65dsi86_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + sn65dsi86_out: endpoint { + remote-endpoint = <&mini_dp_con_in>; + }; + }; + }; + }; +}; + &mmc0 { pinctrl-0 = <&mmc_pins>; pinctrl-1 = <&mmc_pins>; @@ -221,6 +310,11 @@ function = "i2c0"; }; + i2c1_pins: i2c1 { + groups = "i2c1"; + function = "i2c1"; + }; + keys_pins: keys { pins = "GP_5_0", "GP_5_1", "GP_5_2"; bias-pull-up; diff --git a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi index 45d8d927ad26..7a87a5dc1b6a 100644 --- a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi @@ -39,6 +39,12 @@ clock-latency-ns = <500000>; opp-suspend; }; + opp-1800000000 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <880000>; + clock-latency-ns = <500000>; + turbo-mode; + }; }; cpus { @@ -1203,6 +1209,136 @@ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; + fcpvd0: fcp@fea10000 { + compatible = "renesas,fcpv"; + reg = <0 0xfea10000 0 0x200>; + clocks = <&cpg CPG_MOD 508>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 508>; + }; + + fcpvd1: fcp@fea11000 { + compatible = "renesas,fcpv"; + reg = <0 0xfea11000 0 0x200>; + clocks = <&cpg CPG_MOD 509>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 509>; + }; + + vspd0: vsp@fea20000 { + compatible = "renesas,vsp2"; + reg = <0 0xfea20000 0 0x7000>; + interrupts = <GIC_SPI 546 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 830>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 830>; + + renesas,fcp = <&fcpvd0>; + }; + + vspd1: vsp@fea28000 { + compatible = "renesas,vsp2"; + reg = <0 0xfea28000 0 0x7000>; + interrupts = <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 831>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 831>; + + renesas,fcp = <&fcpvd1>; + }; + + du: display@feb00000 { + compatible = "renesas,du-r8a779g0"; + reg = <0 0xfeb00000 0 0x40000>; + interrupts = <GIC_SPI 523 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 524 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 411>; + clock-names = "du.0"; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 411>; + reset-names = "du.0"; + renesas,vsps = <&vspd0 0>, <&vspd1 0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + du_out_dsi0: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + du_out_dsi1: endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + }; + + dsi0: dsi-encoder@fed80000 { + compatible = "renesas,r8a779g0-dsi-csi2-tx"; + reg = <0 0xfed80000 0 0x10000>; + clocks = <&cpg CPG_MOD 415>, + <&cpg CPG_CORE R8A779G0_CLK_DSIEXT>, + <&cpg CPG_CORE R8A779G0_CLK_DSIREF>; + clock-names = "fck", "dsi", "pll"; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 415>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&du_out_dsi0>; + }; + }; + + port@1 { + reg = <1>; + }; + }; + }; + + dsi1: dsi-encoder@fed90000 { + compatible = "renesas,r8a779g0-dsi-csi2-tx"; + reg = <0 0xfed90000 0 0x10000>; + clocks = <&cpg CPG_MOD 416>, + <&cpg CPG_CORE R8A779G0_CLK_DSIEXT>, + <&cpg CPG_CORE R8A779G0_CLK_DSIREF>; + clock-names = "fck", "dsi", "pll"; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 416>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi1_in: endpoint { + remote-endpoint = <&du_out_dsi1>; + }; + }; + + port@1 { + reg = <1>; + }; + }; + }; + prr: chipid@fff00044 { compatible = "renesas,prr"; reg = <0 0xfff00044 0 4>; diff --git a/arch/arm64/boot/dts/renesas/r9a07g043.dtsi b/arch/arm64/boot/dts/renesas/r9a07g043.dtsi index 3f7d451b1199..c8a83e42c4f3 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g043.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a07g043.dtsi @@ -531,6 +531,8 @@ gpio-controller; #gpio-cells = <2>; gpio-ranges = <&pinctrl 0 0 152>; + #interrupt-cells = <2>; + interrupt-controller; clocks = <&cpg CPG_MOD R9A07G043_GPIO_HCLK>; power-domains = <&cpg>; resets = <&cpg R9A07G043_GPIO_RSTN>, diff --git a/arch/arm64/boot/dts/renesas/r9a07g043u.dtsi b/arch/arm64/boot/dts/renesas/r9a07g043u.dtsi index 6af5f3bca2d1..9d854706ada5 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g043u.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a07g043u.dtsi @@ -49,9 +49,81 @@ }; }; +&pinctrl { + interrupt-parent = <&irqc>; +}; + &soc { interrupt-parent = <&gic>; + irqc: interrupt-controller@110a0000 { + compatible = "renesas,r9a07g043u-irqc", + "renesas,rzg2l-irqc"; + reg = <0 0x110a0000 0 0x10000>; + #interrupt-cells = <2>; + #address-cells = <0>; + interrupt-controller; + interrupts = <SOC_PERIPHERAL_IRQ(0) IRQ_TYPE_LEVEL_HIGH>, + <SOC_PERIPHERAL_IRQ(1) IRQ_TYPE_LEVEL_HIGH>, + <SOC_PERIPHERAL_IRQ(2) IRQ_TYPE_LEVEL_HIGH>, + <SOC_PERIPHERAL_IRQ(3) IRQ_TYPE_LEVEL_HIGH>, + <SOC_PERIPHERAL_IRQ(4) IRQ_TYPE_LEVEL_HIGH>, + <SOC_PERIPHERAL_IRQ(5) IRQ_TYPE_LEVEL_HIGH>, + <SOC_PERIPHERAL_IRQ(6) IRQ_TYPE_LEVEL_HIGH>, + <SOC_PERIPHERAL_IRQ(7) IRQ_TYPE_LEVEL_HIGH>, + <SOC_PERIPHERAL_IRQ(8) IRQ_TYPE_LEVEL_HIGH>, + <SOC_PERIPHERAL_IRQ(444) IRQ_TYPE_LEVEL_HIGH>, + <SOC_PERIPHERAL_IRQ(445) IRQ_TYPE_LEVEL_HIGH>, + <SOC_PERIPHERAL_IRQ(446) IRQ_TYPE_LEVEL_HIGH>, + <SOC_PERIPHERAL_IRQ(447) IRQ_TYPE_LEVEL_HIGH>, + <SOC_PERIPHERAL_IRQ(448) IRQ_TYPE_LEVEL_HIGH>, + <SOC_PERIPHERAL_IRQ(449) IRQ_TYPE_LEVEL_HIGH>, + <SOC_PERIPHERAL_IRQ(450) IRQ_TYPE_LEVEL_HIGH>, + <SOC_PERIPHERAL_IRQ(451) IRQ_TYPE_LEVEL_HIGH>, + <SOC_PERIPHERAL_IRQ(452) IRQ_TYPE_LEVEL_HIGH>, + <SOC_PERIPHERAL_IRQ(453) IRQ_TYPE_LEVEL_HIGH>, + <SOC_PERIPHERAL_IRQ(454) IRQ_TYPE_LEVEL_HIGH>, + <SOC_PERIPHERAL_IRQ(455) IRQ_TYPE_LEVEL_HIGH>, + <SOC_PERIPHERAL_IRQ(456) IRQ_TYPE_LEVEL_HIGH>, + <SOC_PERIPHERAL_IRQ(457) IRQ_TYPE_LEVEL_HIGH>, + <SOC_PERIPHERAL_IRQ(458) IRQ_TYPE_LEVEL_HIGH>, + <SOC_PERIPHERAL_IRQ(459) IRQ_TYPE_LEVEL_HIGH>, + <SOC_PERIPHERAL_IRQ(460) IRQ_TYPE_LEVEL_HIGH>, + <SOC_PERIPHERAL_IRQ(461) IRQ_TYPE_LEVEL_HIGH>, + <SOC_PERIPHERAL_IRQ(462) IRQ_TYPE_LEVEL_HIGH>, + <SOC_PERIPHERAL_IRQ(463) IRQ_TYPE_LEVEL_HIGH>, + <SOC_PERIPHERAL_IRQ(464) IRQ_TYPE_LEVEL_HIGH>, + <SOC_PERIPHERAL_IRQ(465) IRQ_TYPE_LEVEL_HIGH>, + <SOC_PERIPHERAL_IRQ(466) IRQ_TYPE_LEVEL_HIGH>, + <SOC_PERIPHERAL_IRQ(467) IRQ_TYPE_LEVEL_HIGH>, + <SOC_PERIPHERAL_IRQ(468) IRQ_TYPE_LEVEL_HIGH>, + <SOC_PERIPHERAL_IRQ(469) IRQ_TYPE_LEVEL_HIGH>, + <SOC_PERIPHERAL_IRQ(470) IRQ_TYPE_LEVEL_HIGH>, + <SOC_PERIPHERAL_IRQ(471) IRQ_TYPE_LEVEL_HIGH>, + <SOC_PERIPHERAL_IRQ(472) IRQ_TYPE_LEVEL_HIGH>, + <SOC_PERIPHERAL_IRQ(473) IRQ_TYPE_LEVEL_HIGH>, + <SOC_PERIPHERAL_IRQ(474) IRQ_TYPE_LEVEL_HIGH>, + <SOC_PERIPHERAL_IRQ(475) IRQ_TYPE_LEVEL_HIGH>, + <SOC_PERIPHERAL_IRQ(25) IRQ_TYPE_EDGE_RISING>; + interrupt-names = "nmi", + "irq0", "irq1", "irq2", "irq3", + "irq4", "irq5", "irq6", "irq7", + "tint0", "tint1", "tint2", "tint3", + "tint4", "tint5", "tint6", "tint7", + "tint8", "tint9", "tint10", "tint11", + "tint12", "tint13", "tint14", "tint15", + "tint16", "tint17", "tint18", "tint19", + "tint20", "tint21", "tint22", "tint23", + "tint24", "tint25", "tint26", "tint27", + "tint28", "tint29", "tint30", "tint31", + "bus-err"; + clocks = <&cpg CPG_MOD R9A07G043_IA55_CLK>, + <&cpg CPG_MOD R9A07G043_IA55_PCLK>; + clock-names = "clk", "pclk"; + power-domains = <&cpg>; + resets = <&cpg R9A07G043_IA55_RESETN>; + }; + gic: interrupt-controller@11900000 { compatible = "arm,gic-v3"; #interrupt-cells = <3>; diff --git a/arch/arm64/boot/dts/renesas/r9a09g011-v2mevk2.dts b/arch/arm64/boot/dts/renesas/r9a09g011-v2mevk2.dts index 11e1d51c7c0e..d6737395df67 100644 --- a/arch/arm64/boot/dts/renesas/r9a09g011-v2mevk2.dts +++ b/arch/arm64/boot/dts/renesas/r9a09g011-v2mevk2.dts @@ -80,6 +80,11 @@ }; }; +&pwc { + renesas,rzv2m-pwc-power; + status = "okay"; +}; + &uart0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/renesas/r9a09g011.dtsi b/arch/arm64/boot/dts/renesas/r9a09g011.dtsi index 0373ec409d54..b5d6f7701ef1 100644 --- a/arch/arm64/boot/dts/renesas/r9a09g011.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a09g011.dtsi @@ -69,6 +69,54 @@ clock-names = "clk"; }; + sdhi0: mmc@85000000 { + compatible = "renesas,sdhi-r9a09g011", + "renesas,rcar-gen3-sdhi"; + reg = <0x0 0x85000000 0 0x2000>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A09G011_SDI0_IMCLK>, + <&cpg CPG_MOD R9A09G011_SDI0_CLK_HS>, + <&cpg CPG_MOD R9A09G011_SDI0_IMCLK2>, + <&cpg CPG_MOD R9A09G011_SDI0_ACLK>; + clock-names = "core", "clkh", "cd", "aclk"; + resets = <&cpg R9A09G011_SDI0_IXRST>; + power-domains = <&cpg>; + status = "disabled"; + }; + + sdhi1: mmc@85010000 { + compatible = "renesas,sdhi-r9a09g011", + "renesas,rcar-gen3-sdhi"; + reg = <0x0 0x85010000 0 0x2000>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A09G011_SDI1_IMCLK>, + <&cpg CPG_MOD R9A09G011_SDI1_CLK_HS>, + <&cpg CPG_MOD R9A09G011_SDI1_IMCLK2>, + <&cpg CPG_MOD R9A09G011_SDI1_ACLK>; + clock-names = "core", "clkh", "cd", "aclk"; + resets = <&cpg R9A09G011_SDI1_IXRST>; + power-domains = <&cpg>; + status = "disabled"; + }; + + emmc: mmc@85020000 { + compatible = "renesas,sdhi-r9a09g011", + "renesas,rcar-gen3-sdhi"; + reg = <0x0 0x85020000 0 0x2000>; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A09G011_EMM_IMCLK>, + <&cpg CPG_MOD R9A09G011_EMM_CLK_HS>, + <&cpg CPG_MOD R9A09G011_EMM_IMCLK2>, + <&cpg CPG_MOD R9A09G011_EMM_ACLK>; + clock-names = "core", "clkh", "cd", "aclk"; + resets = <&cpg R9A09G011_EMM_IXRST>; + power-domains = <&cpg>; + status = "disabled"; + }; + avb: ethernet@a3300000 { compatible = "renesas,etheravb-r9a09g011","renesas,etheravb-rzv2m"; reg = <0 0xa3300000 0 0x800>; @@ -117,7 +165,7 @@ power-domains = <&cpg>; #address-cells = <1>; #size-cells = <0>; - status = "disable"; + status = "disabled"; }; cpg: clock-controller@a3500000 { @@ -130,6 +178,14 @@ #power-domain-cells = <0>; }; + pwc: pwc@a3700000 { + compatible = "renesas,r9a09g011-pwc", "renesas,rzv2m-pwc"; + reg = <0 0xa3700000 0 0x800>; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + sys: system-controller@a3f03000 { compatible = "renesas,r9a09g011-sys"; reg = <0 0xa3f03000 0 0x400>; diff --git a/arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi index 931efc07d6fb..49ecd33aeeb8 100644 --- a/arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi @@ -6,6 +6,7 @@ */ #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irqc-rzg2l.h> #include <dt-bindings/pinctrl/rzg2l-pinctrl.h> / { @@ -77,6 +78,8 @@ compatible = "ethernet-phy-id0022.1640", "ethernet-phy-ieee802.3-c22"; reg = <7>; + interrupt-parent = <&irqc>; + interrupts = <RZG2L_IRQ2 IRQ_TYPE_LEVEL_LOW>; rxc-skew-psec = <2400>; txc-skew-psec = <2400>; rxdv-skew-psec = <0>; @@ -104,6 +107,8 @@ compatible = "ethernet-phy-id0022.1640", "ethernet-phy-ieee802.3-c22"; reg = <7>; + interrupt-parent = <&irqc>; + interrupts = <RZG2L_IRQ7 IRQ_TYPE_LEVEL_LOW>; rxc-skew-psec = <2400>; txc-skew-psec = <2400>; rxdv-skew-psec = <0>; @@ -151,7 +156,8 @@ <RZG2L_PORT_PINMUX(3, 2, 1)>, /* ET0_RXD0 */ <RZG2L_PORT_PINMUX(3, 3, 1)>, /* ET0_RXD1 */ <RZG2L_PORT_PINMUX(4, 0, 1)>, /* ET0_RXD2 */ - <RZG2L_PORT_PINMUX(4, 1, 1)>; /* ET0_RXD3 */ + <RZG2L_PORT_PINMUX(4, 1, 1)>, /* ET0_RXD3 */ + <RZG2L_PORT_PINMUX(5, 1, 7)>; /* IRQ2 */ }; eth1_pins: eth1 { @@ -169,7 +175,8 @@ <RZG2L_PORT_PINMUX(9, 1, 1)>, /* ET1_RXD0 */ <RZG2L_PORT_PINMUX(9, 2, 1)>, /* ET1_RXD1 */ <RZG2L_PORT_PINMUX(9, 3, 1)>, /* ET1_RXD2 */ - <RZG2L_PORT_PINMUX(10, 0, 1)>; /* ET1_RXD3 */ + <RZG2L_PORT_PINMUX(10, 0, 1)>, /* ET1_RXD3 */ + <RZG2L_PORT_PINMUX(18, 5, 1)>; /* IRQ7 */ }; sdhi0_emmc_pins: sd0emmc { diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi index d97473401819..4a3d5037821f 100644 --- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi +++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi @@ -799,9 +799,6 @@ pinctrl-0 = <&sound_pins>, <&sound_clk_pins>; pinctrl-names = "default"; - /* Single DAI */ - #sound-dai-cells = <0>; - /* audio_clkout0/1/2/3 */ #clock-cells = <1>; clock-frequency = <12288000 11289600>; diff --git a/arch/arm64/boot/dts/renesas/ulcb-audio-graph-card-mix+split.dtsi b/arch/arm64/boot/dts/renesas/ulcb-audio-graph-card-mix+split.dtsi new file mode 100644 index 000000000000..672b0a224ef9 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/ulcb-audio-graph-card-mix+split.dtsi @@ -0,0 +1,91 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree for ULCB + Audio Graph Card (MIX) + * + * Copyright (C) 2022 Renesas Electronics Corp. + */ + +/* + * Note: + * The HDMI output is ignored due to the limited number of subdevices + * + * (A) CPU0 (2ch) <-----> (2ch) (X) ak4613 (MIX-0) + * (B) CPU1 (2ch) --/ (MIX-1) + * + * (A) aplay -D plughw:0,0 xxx.wav + * (B) aplay -D plughw:0,1 xxx.wav + * + * (A) arecord -D plughw:0,0 xxx.wav + */ + +/ { + sound_card: sound { + compatible = "audio-graph-scu-card"; + label = "rcar-sound"; + + routing = "ak4613 Playback", "DAI0 Playback", + "ak4613 Playback", "DAI1 Playback", + "DAI0 Capture", "ak4613 Capture"; + + dais = <&rsnd_port0 /* (A) CPU0 */ + &rsnd_port1 /* (B) CPU1 */ + >; + }; +}; + +&ak4613 { + port { + #address-cells = <1>; + #size-cells = <0>; + + /* + * (X) ak4613 + */ + prefix = "ak4613"; + convert-rate = <48000>; + + /* (A) CPU0 <-> (X) ak4613 */ + ak4613_ep1: endpoint@0 { + reg = <0>; + remote-endpoint = <&rsnd_for_ak4613_1>; + }; + /* (B) CPU1 -> (X) ak4613 */ + ak4613_ep2: endpoint@1 { + reg = <1>; + remote-endpoint = <&rsnd_for_ak4613_2>; + }; + }; +}; + +&rcar_sound { + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* + * (A) CPU0 + */ + rsnd_port0: port@0 { + reg = <0>; + rsnd_for_ak4613_1: endpoint { + remote-endpoint = <&ak4613_ep1>; + bitclock-master; + frame-master; + playback = <&src1 &ctu02 &mix0 &dvc0 &ssi0>; + capture = <&ssi1 &src0 &dvc1>; + }; + }; + /* + * (B) CPU1 + */ + rsnd_port1: port@1 { + reg = <1>; + rsnd_for_ak4613_2: endpoint { + remote-endpoint = <&ak4613_ep2>; + bitclock-master; + frame-master; + playback = <&src2 &ctu03 &mix0 &dvc0 &ssi0>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/ulcb-audio-graph-card.dtsi b/arch/arm64/boot/dts/renesas/ulcb-audio-graph-card.dtsi new file mode 100644 index 000000000000..3be54df645e6 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/ulcb-audio-graph-card.dtsi @@ -0,0 +1,85 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree for ULCB + Audio Graph Card + * + * Copyright (C) 2022 Renesas Electronics Corp. + */ + +/* + * (A) CPU0 <-----> ak4613 + * (B) CPU1 -----> HDMI + * + * (A) aplay -D plughw:0,0 xxx.wav + * (B) aplay -D plughw:0,1 xxx.wav + * + * (A) arecord -D plughw:0,0 xxx.wav + */ + +/ { + sound_card: sound { + compatible = "audio-graph-card"; + label = "rcar-sound"; + + dais = <&rsnd_port0 /* (A) CPU0 <-> ak4613 */ + &rsnd_port1 /* (B) CPU1 -> HDMI */ + >; + }; +}; + +&ak4613 { + #sound-dai-cells = <0>; + + port { + /* + * (A) CPU0 <-> ak4613 + */ + ak4613_endpoint: endpoint { + remote-endpoint = <&rsnd_for_ak4613>; + }; + }; +}; + +&hdmi0 { + ports { + port@2 { + /* + * (B) CPU1 -> HDMI + */ + dw_hdmi0_snd_in: endpoint { + remote-endpoint = <&rsnd_for_hdmi>; + }; + }; + }; +}; + +&rcar_sound { + ports { + #address-cells = <1>; + #size-cells = <0>; + rsnd_port0: port@0 { + /* + * (A) CPU0 <-> ak4613 + */ + reg = <0>; + rsnd_for_ak4613: endpoint { + remote-endpoint = <&ak4613_endpoint>; + bitclock-master; + frame-master; + playback = <&ssi0>, <&src0>, <&dvc0>; + capture = <&ssi1>, <&src1>, <&dvc1>; + }; + }; + rsnd_port1: port@1 { + /* + * (B) CPU1 -> HDMI + */ + reg = <1>; + rsnd_for_hdmi: endpoint { + remote-endpoint = <&dw_hdmi0_snd_in>; + bitclock-master; + frame-master; + playback = <&ssi2>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/ulcb-audio-graph-card2-mix+split.dtsi b/arch/arm64/boot/dts/renesas/ulcb-audio-graph-card2-mix+split.dtsi new file mode 100644 index 000000000000..75b024e3fef1 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/ulcb-audio-graph-card2-mix+split.dtsi @@ -0,0 +1,111 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree for ULCB + Audio Graph Card2 (MIX + TDM Split) + * + * Copyright (C) 2022 Renesas Electronics Corp. + */ + +/* + * Note: + * The HDMI output is ignored due to the limited number of subdevices + * + * (A) CPU0 (2ch) <----> (2ch) (X) ak4613 (MIX-0) + * (B) CPU1 (2ch) --/ (MIX-1) + * + * (A) aplay -D plughw:0,0 xxx.wav + * (B) aplay -D plughw:0,1 xxx.wav + * + * (A) arecord -D plughw:0,0 xxx.wav + */ +/ { + sound_card: sound { + compatible = "audio-graph-card2"; + label = "rcar-sound"; + + routing = "ak4613 Playback", "DAI0 Playback", + "ak4613 Playback", "DAI1 Playback", + "DAI0 Capture", "ak4613 Capture"; + + /delete-property/ dais; + links = <&fe_a /* (A) CPU0 */ + &fe_b /* (B) CPU1 */ + &be_x /* (X) ak4613 */ + >; + + dpcm { + #address-cells = <1>; + #size-cells = <0>; + + ports@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* + * FE + * (A) CPU0 (MIX-0) + * (B) CPU1 (MIX-1) + */ + fe_a: port@0 { reg = <0>; fe_a_ep: endpoint { remote-endpoint = <&rsnd_a_ep>; }; }; + fe_b: port@1 { reg = <1>; fe_b_ep: endpoint { remote-endpoint = <&rsnd_b_ep>; }; }; + }; + + ports@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + /* + * BE + * (X) ak4613 + */ + be_x: port@0 { reg = <0>; be_x_ep: endpoint { remote-endpoint = <&ak4613_x_ep>; }; }; + }; + }; + }; +}; + +&ak4613 { + port { + /* + * (X) ak4613 + */ + prefix = "ak4613"; + convert-rate = <48000>; + + ak4613_x_ep: endpoint { + remote-endpoint = <&be_x_ep>; + }; + }; +}; + +&rcar_sound { + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* + * (A) CPU0 + */ + port@0 { + reg = <0>; + rsnd_a_ep: endpoint { + remote-endpoint = <&fe_a_ep>; + bitclock-master; + frame-master; + playback = <&src1 &ctu02 &mix0 &dvc0 &ssi0>; + capture = <&ssi1 &src0 &dvc1>; + }; + }; + /* + * (B) CPU1 + */ + port@1 { + reg = <1>; + rsnd_b_ep: endpoint { + remote-endpoint = <&fe_b_ep>; + bitclock-master; + frame-master; + playback = <&src2 &ctu03 &mix0 &dvc0 &ssi0>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/ulcb-audio-graph-card2.dtsi b/arch/arm64/boot/dts/renesas/ulcb-audio-graph-card2.dtsi new file mode 100644 index 000000000000..5ebec1235843 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/ulcb-audio-graph-card2.dtsi @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree for ULCB + Audio Graph Card2 + * + * Copyright (C) 2022 Renesas Electronics Corp. + */ + +/* + * (A) CPU0 <----> ak4613 + * (B) CPU1 ----> HDMI + * + * (A) aplay -D plughw:0,0 xxx.wav + * (B) aplay -D plughw:0,1 xxx.wav + * + * (A) arecord -D plughw:0,0 xxx.wav + */ +#include "ulcb-audio-graph-card.dtsi" + +&sound_card { + compatible = "audio-graph-card2"; + + /delete-property/ dais; + links = <&rsnd_port0 /* (A) CPU0 <-> ak4613 */ + &rsnd_port1 /* (B) CPU1 -> HDMI */ + >; +}; diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card-mix+split.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card-mix+split.dtsi new file mode 100644 index 000000000000..9b01354940fd --- /dev/null +++ b/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card-mix+split.dtsi @@ -0,0 +1,171 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree for ULCB + Kingfisher + Audio Graph Card (MIX + TDM Split) + * + * Copyright (C) 2022 Renesas Electronics Corp. + */ + +/* + * Note: + * The HDMI output is ignored due to the limited number of subdevices + * + * (A) CPU0 (2ch) <----> (2ch) (X) ak4613 (MIX-0) + * (B) CPU1 (2ch) --/ (MIX-1) + * (C) CPU2 (2ch) ----> (8ch) (Y) PCM3168A-p (TDM-0 : 0,1ch) + * (D) CPU3 (2ch) --/ (TDM-1 : 2,3ch) + * (E) CPU4 (2ch) --/ (TDM-2 : 4,5ch) + * (F) CPU5 (2ch) --/ (TDM-3 : 6,7ch) + * (G) CPU6 (6ch) <---- (6ch) (Z) PCM3168A-c + * + * (A) aplay -D plughw:0,0 xxx.wav (MIX-0) + * (B) aplay -D plughw:0,1 xxx.wav (MIX-1) + * (C) aplay -D plughw:0,2 xxx.wav (TDM-0) + * (D) aplay -D plughw:0,3 xxx.wav (TDM-1) + * (E) aplay -D plughw:0,4 xxx.wav (TDM-2) + * (F) aplay -D plughw:0,5 xxx.wav (TDM-3) + * + * (A) arecord -D plughw:0,0 xxx.wav + * (G) arecord -D plughw:0,6 xxx.wav + */ + +&sound_card { + routing = "ak4613 Playback", "DAI0 Playback", + "ak4613 Playback", "DAI1 Playback", + "DAI0 Capture", "ak4613 Capture", + "pcm3168a Playback", "DAI2 Playback", + "pcm3168a Playback", "DAI3 Playback", + "pcm3168a Playback", "DAI4 Playback", + "pcm3168a Playback", "DAI5 Playback"; + + dais = <&rsnd_port0 /* (A) CPU0 */ + &rsnd_port1 /* (B) CPU1 */ + &rsnd_port2 /* (C) CPU2 */ + &rsnd_port3 /* (D) CPU3 */ + &rsnd_port4 /* (E) CPU4 */ + &rsnd_port5 /* (F) CPU5 */ + &rsnd_port6 /* (G) GPU6 */ + >; +}; + +&pcm3168a { + ports { + #address-cells = <1>; + #size-cells = <0>; + mclk-fs = <512>; + + /* + * (Y) PCM3168A-p + */ + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + prefix = "pcm3168a"; + convert-channels = <8>; /* to 8ch TDM */ + + /* (C) CPU2 -> (Y) PCM3168A-p */ + pcm3168a_endpoint_p1: endpoint@0 { + reg = <0>; + remote-endpoint = <&rsnd_for_pcm3168a_play1>; + clocks = <&clksndsel>; + }; + /* (D) CPU3 -> (Y) PCM3168A-p */ + pcm3168a_endpoint_p2: endpoint@1 { + reg = <1>; + remote-endpoint = <&rsnd_for_pcm3168a_play2>; + clocks = <&clksndsel>; + }; + /* (E) CPU4 -> (Y) PCM3168A-p */ + pcm3168a_endpoint_p3: endpoint@2 { + reg = <2>; + remote-endpoint = <&rsnd_for_pcm3168a_play3>; + clocks = <&clksndsel>; + }; + /* (F) CPU5 -> (Y) PCM3168A-p */ + pcm3168a_endpoint_p4: endpoint@3 { + reg = <3>; + remote-endpoint = <&rsnd_for_pcm3168a_play4>; + clocks = <&clksndsel>; + }; + }; + /* + * (Z) PCM3168A-c + */ + port@1 { + reg = <1>; + /* (G) CPU6 <- PCM3168A-c */ + pcm3168a_endpoint_c: endpoint { + remote-endpoint = <&rsnd_for_pcm3168a_capture>; + clocks = <&clksndsel>; + }; + }; + }; +}; + +&rcar_sound { + ports { + /* rsnd_port0-1 are defined in ulcb.dtsi */ + + /* + * (C) CPU2 + */ + rsnd_port2: port@2 { + reg = <2>; + rsnd_for_pcm3168a_play1: endpoint { + remote-endpoint = <&pcm3168a_endpoint_p1>; + bitclock-master; + frame-master; + playback = <&ssiu30 &ssi3>; + }; + }; + /* + * (D) CPU3 + */ + rsnd_port3: port@3 { + reg = <3>; + rsnd_for_pcm3168a_play2: endpoint { + remote-endpoint = <&pcm3168a_endpoint_p2>; + bitclock-master; + frame-master; + playback = <&ssiu31 &ssi3>; + }; + }; + /* + * (E) CPU4 + */ + rsnd_port4: port@4 { + reg = <4>; + rsnd_for_pcm3168a_play3: endpoint { + remote-endpoint = <&pcm3168a_endpoint_p3>; + bitclock-master; + frame-master; + playback = <&ssiu32 &ssi3>; + }; + }; + /* + * (F) CPU5 + */ + rsnd_port5: port@5 { + reg = <5>; + rsnd_for_pcm3168a_play4: endpoint { + remote-endpoint = <&pcm3168a_endpoint_p4>; + bitclock-master; + frame-master; + playback = <&ssiu33 &ssi3>; + }; + }; + /* + * (G) CPU6 + */ + rsnd_port6: port@6 { + reg = <6>; + rsnd_for_pcm3168a_capture: endpoint { + remote-endpoint = <&pcm3168a_endpoint_c>; + bitclock-master; + frame-master; + dai-tdm-slot-num = <6>; + capture = <&ssi4>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card.dtsi new file mode 100644 index 000000000000..1db99b7608f0 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card.dtsi @@ -0,0 +1,88 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree for ULCB + Kingfisher + Audio Graph Card + * + * Copyright (C) 2022 Renesas Electronics Corp. + */ + +/* + * (A) CPU0 <----> ak4613 + * (B) CPU1 ----> HDMI + * (C) CPU2 ----> PCM3168A-p (8ch) + * (D) CPU3 <---- PCM3168A-c (6ch) + * + * (A) aplay -D plughw:0,0 xxx.wav + * (B) aplay -D plughw:0,1 xxx.wav + * (C) aplay -D plughw:0,2 xxx.wav + * + * (A) arecord -D plughw:0,0 xxx.wav + * (D) arecord -D plughw:0,3 xxx.wav + */ + +&sound_card { + dais = <&rsnd_port0 /* (A) CPU0 <-> ak4613 */ + &rsnd_port1 /* (B) CPU1 -> HDMI */ + &rsnd_port2 /* (C) CPU2 -> PCM3168A-p */ + &rsnd_port3 /* (D) CPU3 <- PCM3168A-c */ + >; +}; + +&pcm3168a { + ports { + #address-cells = <1>; + #size-cells = <0>; + mclk-fs = <512>; + /* + * (C) CPU2 -> PCM3168A-p + */ + port@0 { + reg = <0>; + pcm3168a_endpoint_p: endpoint { + remote-endpoint = <&rsnd_for_pcm3168a_play>; + clocks = <&clksndsel>; + }; + }; + /* + * (D) CPU3 <- PCM3168A-c + */ + port@1 { + reg = <1>; + pcm3168a_endpoint_c: endpoint { + remote-endpoint = <&rsnd_for_pcm3168a_capture>; + clocks = <&clksndsel>; + }; + }; + }; +}; + +&rcar_sound { + ports { + /* rsnd_port0/1 are defined in ulcb.dtsi */ + /* + * (C) CPU2 -> PCM3168A-p + */ + rsnd_port2: port@2 { + reg = <2>; + rsnd_for_pcm3168a_play: endpoint { + remote-endpoint = <&pcm3168a_endpoint_p>; + bitclock-master; + frame-master; + dai-tdm-slot-num = <8>; + playback = <&ssi3>; + }; + }; + /* + * (D) CPU3 <- PCM3168A-c + */ + rsnd_port3: port@3 { + reg = <3>; + rsnd_for_pcm3168a_capture: endpoint { + remote-endpoint = <&pcm3168a_endpoint_c>; + bitclock-master; + frame-master; + dai-tdm-slot-num = <6>; + capture = <&ssi4>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card2-mix+split.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card2-mix+split.dtsi new file mode 100644 index 000000000000..da644128a9ae --- /dev/null +++ b/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card2-mix+split.dtsi @@ -0,0 +1,178 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree for ULCB + Kingfisher + Audio Graph Card2 (MIX + TDM Split) + * + * Copyright (C) 2022 Renesas Electronics Corp. + */ + +/* + * Note: + * The HDMI output is ignored due to the limited number of subdevices + * + * (A) CPU0 (2ch) <----> (2ch) (X) ak4613 (MIX-0) + * (B) CPU1 (2ch) --/ (MIX-1) + * (C) CPU3 (2ch) ----> (8ch) (Y) PCM3168A-p (TDM-0 : 0,1ch) + * (D) CPU2 (2ch) --/ (TDM-1 : 2,3ch) + * (E) CPU4 (2ch) --/ (TDM-2 : 4,5ch) + * (F) CPU5 (2ch) --/ (TDM-3 : 6,7ch) + * (G) CPU6 (6ch) <---- (6ch) (Z) PCM3168A-c + * + * (A) aplay -D plughw:0,0 xxx.wav (MIX-0) + * (B) aplay -D plughw:0,1 xxx.wav (MIX-1) + * (C) aplay -D plughw:0,2 xxx.wav (TDM-0) + * (D) aplay -D plughw:0,3 xxx.wav (TDM-1) + * (E) aplay -D plughw:0,4 xxx.wav (TDM-2) + * (F) aplay -D plughw:0,5 xxx.wav (TDM-3) + * + * (A) arecord -D plughw:0,0 xxx.wav + * (G) arecord -D plughw:0,6 xxx.wav + */ +&sound_card { + routing = "ak4613 Playback", "DAI0 Playback", + "ak4613 Playback", "DAI1 Playback", + "DAI0 Capture", "ak4613 Capture", + "pcm3168a Playback", "DAI2 Playback", + "pcm3168a Playback", "DAI3 Playback", + "pcm3168a Playback", "DAI4 Playback", + "pcm3168a Playback", "DAI5 Playback", + "DAI6 Capture", "pcm3168a Capture"; + + /delete-property/ dais; + links = <&fe_a /* (A) CPU0 */ + &fe_b /* (B) CPU1 */ + &fe_c /* (C) CPU2 */ + &fe_d /* (D) CPU3 */ + &fe_e /* (E) CPU4 */ + &fe_f /* (F) CPU5 */ + &rsnd_g /* (G) CPU6 */ + &be_x /* (X) ak4613 */ + &be_y /* (Y) PCM3168A-p */ + >; + + dpcm { + ports@0 { + /* + * FE + * + * (A)/(B) are defined on ulcb + * (C) CPU2 + * (D) CPU3 + * (E) CPU4 + * (F) CPU5 + */ + fe_c: port@2 { reg = <2>; fe_c_ep: endpoint { remote-endpoint = <&rsnd_c_ep>; }; }; + fe_d: port@3 { reg = <3>; fe_d_ep: endpoint { remote-endpoint = <&rsnd_d_ep>; }; }; + fe_e: port@4 { reg = <4>; fe_e_ep: endpoint { remote-endpoint = <&rsnd_e_ep>; }; }; + fe_f: port@5 { reg = <5>; fe_f_ep: endpoint { remote-endpoint = <&rsnd_f_ep>; }; }; + }; + + ports@1 { + /* + * BE + * + * (X) is defined on ulcb + * (Y) PCM3168A-p + */ + be_y: port@1 { reg = <1>; be_y_ep: endpoint { remote-endpoint = <&pcm3168a_y_ep>; }; }; + }; + }; +}; + +&pcm3168a { + ports { + #address-cells = <1>; + #size-cells = <0>; + + mclk-fs = <512>; + prefix = "pcm3168a"; + + /* + * (Y) PCM3168A-p + */ + port@0 { + reg = <0>; + convert-channels = <8>; /* to 8ch TDM */ + pcm3168a_y_ep: endpoint { + remote-endpoint = <&be_y_ep>; + clocks = <&clksndsel>; + }; + }; + /* + * (Z) PCM3168A-c + */ + port@1 { + reg = <1>; + pcm3168a_z_ep: endpoint { + remote-endpoint = <&rsnd_g_ep>; + clocks = <&clksndsel>; + }; + }; + }; +}; + +&rcar_sound { + ports { + /* (A)/(B) are defined in ulcb.dtsi */ + + /* + * (C) CPU2 + */ + port@2 { + reg = <2>; + rsnd_c_ep: endpoint { + remote-endpoint = <&fe_c_ep>; + bitclock-master; + frame-master; + playback = <&ssiu30 &ssi3>; + }; + }; + /* + * (D) CPU3 + */ + port@3 { + reg = <3>; + rsnd_d_ep: endpoint { + remote-endpoint = <&fe_d_ep>; + bitclock-master; + frame-master; + playback = <&ssiu31 &ssi3>; + }; + }; + /* + * (E) CPU4 + */ + port@4 { + reg = <4>; + rsnd_e_ep: endpoint { + remote-endpoint = <&fe_e_ep>; + bitclock-master; + frame-master; + playback = <&ssiu32 &ssi3>; + }; + }; + /* + * (F) CPU5 + */ + port@5 { + reg = <5>; + rsnd_f_ep: endpoint { + remote-endpoint = <&fe_f_ep>; + bitclock-master; + frame-master; + playback = <&ssiu33 &ssi3>; + }; + }; + /* + * (G) CPU6 + */ + rsnd_g: port@6 { + reg = <6>; + rsnd_g_ep: endpoint { + remote-endpoint = <&pcm3168a_z_ep>; + bitclock-master; + frame-master; + capture = <&ssi4>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card2.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card2.dtsi new file mode 100644 index 000000000000..c30e056538e4 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card2.dtsi @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree for ULCB + Kingfisher + Audio Graph Card2 + * + * Copyright (C) 2022 Renesas Electronics Corp. + */ + +/* + * (A) CPU0 <----> ak4613 + * (B) CPU1 ----> HDMI + * (C) CPU2 ----> PCM3168A-p (8ch) + * (D) CPU3 <---- PCM3168A-c (6ch) + * + * (A) aplay -D plughw:0,0 xxx.wav + * (B) aplay -D plughw:0,1 xxx.wav + * (C) aplay -D plughw:0,2 xxx.wav + * + * (A) arecord -D plughw:0,0 xxx.wav + * (D) arecord -D plughw:0,3 xxx.wav + */ +#include "ulcb-kf-audio-graph-card.dtsi" + +&sound_card { + /delete-property/ dais; + links = <&rsnd_port0 /* (A) CPU0 <-> ak4613 */ + &rsnd_port1 /* (B) CPU1 -> HDMI */ + &rsnd_port2 /* (C) CPU2 -> PCM3168A-p */ + &rsnd_port3 /* (D) CPU3 <- PCM3168A-c */ + >; +}; diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf-simple-audio-card-mix+split.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf-simple-audio-card-mix+split.dtsi new file mode 100644 index 000000000000..bc221f994473 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/ulcb-kf-simple-audio-card-mix+split.dtsi @@ -0,0 +1,153 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree for ULCB + Kingfisher + Simple Audio Card (MIX + TDM Split) + * + * Copyright (C) 2022 Renesas Electronics Corp. + */ + +/* + * Note: + * The HDMI output is ignored due to the limited number of subdevices + * + * (A) CPU0 (2ch) <----> (2ch) (X) ak4613 (MIX-0) + * (B) CPU1 (2ch) --/ (MIX-1) + * (C) CPU3 (2ch) ----> (8ch) (Y) PCM3168A-p (TDM-0 : 0,1ch) + * (D) CPU2 (2ch) --/ (TDM-1 : 2,3ch) + * (E) CPU4 (2ch) --/ (TDM-2 : 4,5ch) + * (F) CPU5 (2ch) --/ (TDM-3 : 6,7ch) + * (G) CPU6 (6ch) <---- (6ch) (Z) PCM3168A-c + * + * (A) aplay -D plughw:0,0 xxx.wav (MIX-0) + * (B) aplay -D plughw:0,1 xxx.wav (MIX-1) + * (C) aplay -D plughw:0,2 xxx.wav (TDM-0) + * (D) aplay -D plughw:0,3 xxx.wav (TDM-1) + * (E) aplay -D plughw:0,4 xxx.wav (TDM-2) + * (F) aplay -D plughw:0,5 xxx.wav (TDM-3) + * + * (A) arecord -D plughw:0,0 xxx.wav + * (G) arecord -D plughw:0,6 xxx.wav + */ + +&sound_card { + + simple-audio-card,routing = "ak4613 Playback", "DAI0 Playback", + "ak4613 Playback", "DAI1 Playback", + "DAI0 Capture", "ak4613 Capture", + "pcm3168a Playback", "DAI2 Playback", + "pcm3168a Playback", "DAI3 Playback", + "pcm3168a Playback", "DAI4 Playback", + "pcm3168a Playback", "DAI5 Playback"; + + /* dai-link@0 is defined in ulcb.dtsi */ + + simple-audio-card,dai-link@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + convert-channels = <8>; /* to 8ch TDM */ + + /* + * (C) CPU2 + */ + cpu@0 { + reg = <0>; + bitclock-master; + frame-master; + sound-dai = <&rcar_sound 2>; + }; + /* + * (D) CPU3 + */ + cpu@1 { + reg = <1>; + sound-dai = <&rcar_sound 3>; + }; + /* + * (E) CPU4 + */ + cpu@2 { + reg = <2>; + sound-dai = <&rcar_sound 4>; + }; + /* + * (F) CPU5 + */ + cpu@3 { + reg = <3>; + sound-dai = <&rcar_sound 5>; + }; + /* + * (Y) PCM3168A-p + */ + codec { + prefix = "pcm3168a"; + mclk-fs = <512>; + sound-dai = <&pcm3168a 0>; + }; + }; + simple-audio-card,dai-link@2 { + reg = <2>; + /* + * (G) CPU6 + */ + cpu { + bitclock-master; + frame-master; + sound-dai = <&rcar_sound 6>; + }; + /* + * (Z) PCM3168A-c + */ + codec { + prefix = "pcm3168a"; + mclk-fs = <512>; + sound-dai = <&pcm3168a 1>; + }; + }; +}; + +&pcm3168a { + /* + * (Y) PCM3168A-p + * (Z) PCM3168A-c + */ + #sound-dai-cells = <1>; +}; + +&rcar_sound { + rcar_sound,dai { + + /* dai0-1 are defined in ulcb.dtsi */ + + /* + * (C) CPU2 + */ + dai2 { + playback = <&ssiu30 &ssi3>; + }; + /* + * (D) CPU3 + */ + dai3 { + playback = <&ssiu31 &ssi3>; + }; + /* + * (E) CPU4 + */ + dai4 { + playback = <&ssiu32 &ssi3>; + }; + /* + * (F) CPU5 + */ + dai5 { + playback = <&ssiu33 &ssi3>; + }; + /* + * (G) CPU6 + */ + dai6 { + capture = <&ssi4>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf-simple-audio-card.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf-simple-audio-card.dtsi new file mode 100644 index 000000000000..2010e8ac7fdc --- /dev/null +++ b/arch/arm64/boot/dts/renesas/ulcb-kf-simple-audio-card.dtsi @@ -0,0 +1,85 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree for ULCB + Kingfisher + Simple Audio Card + * + * Copyright (C) 2022 Renesas Electronics Corp. + */ + +/* + * (A) CPU0 <----> ak4613 + * (B) CPU1 ----> HDMI + * (C) CPU2 ----> PCM3168A-p + * (D) CPU3 <---- PCM3168A-c + * + * (A) aplay -D plughw:0,0 xxx.wav + * (B) aplay -D plughw:0,1 xxx.wav + * (C) aplay -D plughw:0,2 xxx.wav + * + * (A) arecord -D plughw:0,0 xxx.wav + * (D) arecord -D plughw:0,3 xxx.wav + */ + +&sound_card { + /* dai-link@0/1 are defined in ulcb.dtsi */ + + /* + * (C) CPU2 -> PCM3168A-p + */ + simple-audio-card,dai-link@2 { + reg = <2>; + cpu { + bitclock-master; + frame-master; + dai-tdm-slot-num = <8>; + sound-dai = <&rcar_sound 2>; + }; + codec { + mclk-fs = <512>; + sound-dai = <&pcm3168a 0>; + }; + }; + /* + * (D) CPU3 <- PCM3168A-c + */ + simple-audio-card,dai-link@3 { + reg = <3>; + cpu { + bitclock-master; + frame-master; + dai-tdm-slot-num = <6>; + sound-dai = <&rcar_sound 3>; + }; + codec { + mclk-fs = <512>; + sound-dai = <&pcm3168a 1>; + }; + }; +}; + +&pcm3168a { + /* + * (C) CPU2 -> PCM3168A-p + * (D) CPU3 <- PCM3168A-c + */ + #sound-dai-cells = <1>; +}; + +&rcar_sound { + + rcar_sound,dai { + /* dai0-1 are defined in ulcb.dtsi */ + + /* + * (C) CPU2 -> PCM3168A-p + */ + dai2 { + playback = <&ssi3>; + }; + /* + * (D) CPU3 <- PCM3168A-c + */ + dai3 { + capture = <&ssi4>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi index 408871c2859d..efc80960380f 100644 --- a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi @@ -6,12 +6,6 @@ * Copyright (C) 2017 Cogent Embedded, Inc. */ -/* - * SSI-PCM3168A - * aplay -D plughw:0,2 xxx.wav - * arecord -D plughw:0,3 xxx.wav - */ - / { aliases { serial1 = &hscif0; @@ -126,7 +120,7 @@ }; &i2c2 { - i2cswitch2: i2c-switch@71 { + i2cmux2: i2c-mux@71 { compatible = "nxp,pca9548"; #address-cells = <1>; #size-cells = <0>; @@ -212,26 +206,6 @@ VCCAD2-supply = <&snd_vcc5v>; VCCDA1-supply = <&snd_vcc5v>; VCCDA2-supply = <&snd_vcc5v>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - mclk-fs = <512>; - port@0 { - reg = <0>; - pcm3168a_endpoint_p: endpoint { - remote-endpoint = <&rsnd_for_pcm3168a_play>; - clocks = <&clksndsel>; - }; - }; - port@1 { - reg = <1>; - pcm3168a_endpoint_c: endpoint { - remote-endpoint = <&rsnd_for_pcm3168a_capture>; - clocks = <&clksndsel>; - }; - }; - }; }; gyroscope@6b { @@ -317,7 +291,7 @@ }; &i2c4 { - i2cswitch4: i2c-switch@71 { + i2cmux4: i2c-mux@71 { compatible = "nxp,pca9548"; #address-cells = <1>; #size-cells = <0>; @@ -418,30 +392,6 @@ pinctrl-0 = <&sound_pins &sound_clk_pins &sound_pcm_pins>; - - ports { - /* rsnd_port0/1 are defined in ulcb.dtsi */ - rsnd_port2: port@2 { - reg = <2>; - rsnd_for_pcm3168a_play: endpoint { - remote-endpoint = <&pcm3168a_endpoint_p>; - bitclock-master; - frame-master; - dai-tdm-slot-num = <8>; - playback = <&ssi3>; - }; - }; - rsnd_port3: port@3 { - reg = <3>; - rsnd_for_pcm3168a_capture: endpoint { - remote-endpoint = <&pcm3168a_endpoint_c>; - bitclock-master; - frame-master; - dai-tdm-slot-num = <6>; - capture = <&ssi4>; - }; - }; - }; }; &scif1 { @@ -476,14 +426,6 @@ }; }; -&sound_card { - links = <&rsnd_port0 /* ak4613 */ - &rsnd_port1 /* HDMI0 */ - &rsnd_port2 /* pcm3168a playback */ - &rsnd_port3 /* pcm3168a capture */ - >; -}; - &ssi4 { shared-pin; }; @@ -498,3 +440,17 @@ &xhci0 { status = "okay"; }; + +/* + * For sound-test. + * + * We can switch Audio Card for testing + * see also ulcb.dtsi + * + * #include "ulcb-kf-simple-audio-card.dtsi" + * #include "ulcb-kf-simple-audio-card-mix+split.dtsi" + * #include "ulcb-kf-audio-graph-card.dtsi" + * #include "ulcb-kf-audio-graph-card-mix+split.dtsi" + * #include "ulcb-kf-audio-graph-card2-mix+split.dtsi" + */ +#include "ulcb-kf-audio-graph-card2.dtsi" diff --git a/arch/arm64/boot/dts/renesas/ulcb-simple-audio-card-mix+split.dtsi b/arch/arm64/boot/dts/renesas/ulcb-simple-audio-card-mix+split.dtsi new file mode 100644 index 000000000000..217d89019845 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/ulcb-simple-audio-card-mix+split.dtsi @@ -0,0 +1,92 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree for ULCB + Simple Audio Card (MIXer) + * + * Copyright (C) 2022 Renesas Electronics Corp. + */ + +/* + * Note: + * The HDMI output is ignored due to the limited number of subdevices + * + * (A) CPU0 (2ch) <----> (2ch) (X) ak4613 (MIX-0) + * (B) CPU1 (2ch) --/ (MIX-1) + * + * (A) aplay -D plughw:0,0 xxx.wav + * (B) aplay -D plughw:0,1 xxx.wav + * + * (A) arecord -D plughw:0,0 xxx.wav + */ + +/ { + sound_card: sound { + #address-cells = <1>; + #size-cells = <0>; + + compatible = "simple-scu-audio-card"; + label = "rcar-sound"; + + simple-audio-card,prefix = "ak4613"; + simple-audio-card,routing = "ak4613 Playback", "DAI0 Playback", + "ak4613 Playback", "DAI1 Playback", + "DAI0 Capture", "ak4613 Capture"; + + simple-audio-card,dai-link@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + convert-rate = <48000>; + + /* + * (A) CPU0 + */ + cpu@0 { + reg = <0>; + bitclock-master; + frame-master; + sound-dai = <&rcar_sound 0>; + }; + /* + * (B) CPU1 + */ + cpu@1 { + reg = <1>; + sound-dai = <&rcar_sound 1>; + }; + /* + * (X) ak4613 + */ + codec { + prefix = "ak4613"; + sound-dai = <&ak4613>; + }; + }; + }; +}; + +&ak4613 { + /* + * (X) ak4613 + */ + #sound-dai-cells = <0>; +}; + +&rcar_sound { + #sound-dai-cells = <1>; + + rcar_sound,dai { + /* + * (A) CPU0 + */ + dai0 { + playback = <&src1 &ctu02 &mix0 &dvc0 &ssi0>; + capture = <&ssi1 &src0 &dvc1>; + }; + /* + * (B) CPU1 + */ + dai1 { + playback = <&src2 &ctu03 &mix0 &dvc0 &ssi0>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/ulcb-simple-audio-card.dtsi b/arch/arm64/boot/dts/renesas/ulcb-simple-audio-card.dtsi new file mode 100644 index 000000000000..751cfd8c5257 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/ulcb-simple-audio-card.dtsi @@ -0,0 +1,89 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree for ULCB + Simple Audio Card + * + * Copyright (C) 2022 Renesas Electronics Corp. + */ + +/* + * (A) CPU0 <----> ak4613 + * (B) CPU1 ----> HDMI + * + * (A) aplay -D plughw:0,0 xxx.wav + * (B) aplay -D plughw:0,1 xxx.wav + * + * (A) arecord -D plughw:0,0 xxx.wav + */ + +/ { + sound_card: sound { + compatible = "simple-audio-card"; + label = "rcar-sound"; + + #address-cells = <1>; + #size-cells = <0>; + + /* + * (A) CPU0 <-> ak4613 + */ + simple-audio-card,dai-link@0 { + reg = <0>; + cpu { + bitclock-master; + frame-master; + sound-dai = <&rcar_sound 0>; + }; + codec { + sound-dai = <&ak4613>; + }; + }; + /* + * (B) CPU1 -> HDMI + */ + simple-audio-card,dai-link@1 { + reg = <1>; + cpu { + bitclock-master; + frame-master; + sound-dai = <&rcar_sound 1>; + }; + codec { + sound-dai = <&hdmi0>; + }; + }; + }; +}; + +&ak4613 { + /* + * (A) CPU0 <-> ak4613 + */ + #sound-dai-cells = <0>; +}; + +&hdmi0 { + /* + * (B) CPU1 -> HDMI + */ + #sound-dai-cells = <0>; +}; + +&rcar_sound { + #sound-dai-cells = <1>; + + rcar_sound,dai { + /* + * (A) CPU0 <-> ak4613 + */ + dai0 { + playback = <&ssi0 &src0 &dvc0>; + capture = <&ssi1 &src1 &dvc1>; + }; + /* + * (B) CPU1 -> HDMI + */ + dai1 { + playback = <&ssi2>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi index 29cedf4dc1a9..d693e879b330 100644 --- a/arch/arm64/boot/dts/renesas/ulcb.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi @@ -6,14 +6,6 @@ * Copyright (C) 2016 Cogent Embedded, Inc. */ -/* - * SSI-AK4613 - * aplay -D plughw:0,0 xxx.wav - * arecord -D plughw:0,0 xxx.wav - * SSI-HDMI - * aplay -D plughw:0,1 xxx.wav - */ - #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> @@ -102,15 +94,6 @@ regulator-always-on; }; - sound_card: sound { - compatible = "audio-graph-card2"; - label = "rcar-sound"; - - links = <&rsnd_port0 /* ak4613 */ - &rsnd_port1 /* HDMI0 */ - >; - }; - vcc_sdhi0: regulator-vcc-sdhi0 { compatible = "regulator-fixed"; @@ -201,9 +184,6 @@ }; port@2 { reg = <2>; - dw_hdmi0_snd_in: endpoint { - remote-endpoint = <&rsnd_for_hdmi>; - }; }; }; }; @@ -218,7 +198,6 @@ ak4613: codec@10 { compatible = "asahi-kasei,ak4613"; - #sound-dai-cells = <0>; reg = <0x10>; clocks = <&rcar_sound 3>; @@ -230,12 +209,6 @@ asahi-kasei,out4-single-end; asahi-kasei,out5-single-end; asahi-kasei,out6-single-end; - - port { - ak4613_endpoint: endpoint { - remote-endpoint = <&rsnd_for_ak4613>; - }; - }; }; cs2000: clk-multiplier@4f { @@ -381,9 +354,6 @@ pinctrl-0 = <&sound_pins>, <&sound_clk_pins>; pinctrl-names = "default"; - /* Single DAI */ - #sound-dai-cells = <0>; - /* audio_clkout0/1/2/3 */ #clock-cells = <1>; clock-frequency = <12288000 11289600>; @@ -408,30 +378,6 @@ <&audio_clk_a>, <&cs2000>, <&audio_clk_c>, <&cpg CPG_CORE CPG_AUDIO_CLK_I>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - rsnd_port0: port@0 { - reg = <0>; - rsnd_for_ak4613: endpoint { - remote-endpoint = <&ak4613_endpoint>; - bitclock-master; - frame-master; - playback = <&ssi0>, <&src0>, <&dvc0>; - capture = <&ssi1>, <&src1>, <&dvc1>; - }; - }; - rsnd_port1: port@1 { - reg = <1>; - rsnd_for_hdmi: endpoint { - remote-endpoint = <&dw_hdmi0_snd_in>; - bitclock-master; - frame-master; - playback = <&ssi2>; - }; - }; - }; }; &rpc { @@ -541,3 +487,17 @@ status = "okay"; }; + + +/* + * For sound-test. + * + * We can switch Audio Card for testing + * + * #include "ulcb-simple-audio-card.dtsi" + * #include "ulcb-simple-audio-card-mix+split.dtsi" + * #include "ulcb-audio-graph-card.dtsi" + * #include "ulcb-audio-graph-card-mix+split.dtsi" + * #include "ulcb-audio-graph-card2-mix+split.dtsi" + */ +#include "ulcb-audio-graph-card2.dtsi" diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index 0a76a2ebb5f6..99a44c400d6a 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -15,6 +15,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go3.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-a1.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2s.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-orangepi-r1-plus.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock-pi-e.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-cc.dtb @@ -73,12 +74,20 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.1.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-a.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-b.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-radxa-cm3-io.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-roc-pc.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-blade.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-cm4.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-model-a.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-box-demo.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-lubancat-1.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-lubancat-2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-odroid-m1.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-radxa-e25.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6a-io.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-evb1-v10.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-rock-5a.dtb diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi index bfa3580429d1..4f6959eb564d 100644 --- a/arch/arm64/boot/dts/rockchip/px30.dtsi +++ b/arch/arm64/boot/dts/rockchip/px30.dtsi @@ -210,12 +210,6 @@ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; contribution = <4096>; }; - - map1 { - trip = <&target>; - cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - contribution = <4096>; - }; }; }; @@ -223,6 +217,33 @@ polling-delay-passive = <100>; /* milliseconds */ polling-delay = <1000>; /* milliseconds */ thermal-sensors = <&tsadc 1>; + + trips { + gpu_threshold: gpu-threshold { + temperature = <70000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpu_target: gpu-target { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpu_crit: gpu-crit { + temperature = <115000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&gpu_target>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go.dtsi b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go.dtsi index fbc6bfbaa5c1..04eba432fb0e 100644 --- a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go.dtsi @@ -8,6 +8,7 @@ /dts-v1/; #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> #include <dt-bindings/pinctrl/rockchip.h> #include "rk3326.dtsi" @@ -113,21 +114,35 @@ }; }; - leds: gpio-leds { + /* led-1 is wired directly to output of always-on regulator */ + + gpio_led: gpio-leds { compatible = "gpio-leds"; pinctrl-names = "default"; - pinctrl-0 = <&blue_led_pin>; + pinctrl-0 = <&red_led_pin>; + + red_led: led-3 { + color = <LED_COLOR_ID_RED>; + gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; + function = LED_FUNCTION_CHARGING; + }; + }; - blue_led: led-0 { - label = "blue:heartbeat"; - gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>; + pwm_led: led-controller { + compatible = "pwm-leds"; + + blue_led: led-2 { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_STATUS; linux,default-trigger = "heartbeat"; + max-brightness = <255>; + pwms = <&pwm3 0 25000 0>; }; }; rk817-sound { compatible = "simple-audio-card"; - simple-audio-card,name = "Analog"; + simple-audio-card,name = "rk817_int"; simple-audio-card,format = "i2s"; simple-audio-card,hp-det-gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>; simple-audio-card,mclk-fs = <256>; @@ -192,14 +207,12 @@ assigned-clocks = <&cru PLL_NPLL>, <&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>, <&cru HCLK_BUS_PRE>, <&cru HCLK_PERI_PRE>, - <&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>, - <&cru PLL_CPLL>; + <&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>; assigned-clock-rates = <1188000000>, <200000000>, <200000000>, <150000000>, <150000000>, - <100000000>, <200000000>, - <17000000>; + <100000000>, <200000000>; }; &display_subsystem { @@ -467,6 +480,10 @@ status = "okay"; }; +&pwm3 { + status = "okay"; +}; + &saradc { vref-supply = <&vcc_1v8>; status = "okay"; @@ -571,8 +588,8 @@ }; leds { - blue_led_pin: blue-led-pin { - rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; + red_led_pin: red-led-pin { + rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts new file mode 100644 index 000000000000..dc83d74045a3 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts @@ -0,0 +1,373 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Based on rk3328-nanopi-r2s.dts, which is: + * Copyright (c) 2020 David Bauer <mail@david-bauer.net> + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include "rk3328.dtsi" + +/ { + model = "Xunlong Orange Pi R1 Plus"; + compatible = "xunlong,orangepi-r1-plus", "rockchip,rk3328"; + + aliases { + ethernet1 = &rtl8153; + mmc0 = &sdmmc; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + gmac_clk: gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "gmac_clkin"; + #clock-cells = <0>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&lan_led_pin>, <&sys_led_pin>, <&wan_led_pin>; + pinctrl-names = "default"; + + led-0 { + function = LED_FUNCTION_LAN; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>; + }; + + led-1 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_RED>; + gpios = <&gpio3 RK_PC5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + led-2 { + function = LED_FUNCTION_WAN; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_HIGH>; + }; + }; + + vcc_sd: sdmmc-regulator { + compatible = "regulator-fixed"; + gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&sdmmc0m1_pin>; + pinctrl-names = "default"; + regulator-name = "vcc_sd"; + regulator-boot-on; + vin-supply = <&vcc_io>; + }; + + vcc_sys: vcc-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vdd_5v_lan: vdd-5v-lan-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&lan_vdd_pin>; + pinctrl-names = "default"; + regulator-name = "vdd_5v_lan"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + }; +}; + +&cpu0 { + cpu-supply = <&vdd_arm>; +}; + +&cpu1 { + cpu-supply = <&vdd_arm>; +}; + +&cpu2 { + cpu-supply = <&vdd_arm>; +}; + +&cpu3 { + cpu-supply = <&vdd_arm>; +}; + +&display_subsystem { + status = "disabled"; +}; + +&gmac2io { + assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>; + assigned-clock-parents = <&gmac_clk>, <&gmac_clk>; + clock_in_out = "input"; + phy-handle = <&rtl8211e>; + phy-mode = "rgmii"; + phy-supply = <&vcc_io>; + pinctrl-0 = <&rgmiim1_pins>; + pinctrl-names = "default"; + snps,aal; + rx_delay = <0x18>; + tx_delay = <0x24>; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + rtl8211e: ethernet-phy@1 { + reg = <1>; + pinctrl-0 = <ð_phy_reset_pin>; + pinctrl-names = "default"; + reset-assert-us = <10000>; + reset-deassert-us = <50000>; + reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&i2c1 { + status = "okay"; + + rk805: pmic@18 { + compatible = "rockchip,rk805"; + reg = <0x18>; + interrupt-parent = <&gpio1>; + interrupts = <24 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk805-clkout2"; + gpio-controller; + #gpio-cells = <2>; + pinctrl-0 = <&pmic_int_l>; + pinctrl-names = "default"; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc5-supply = <&vcc_io>; + vcc6-supply = <&vcc_sys>; + + regulators { + vdd_log: DCDC_REG1 { + regulator-name = "vdd_log"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1450000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vdd_arm: DCDC_REG2 { + regulator-name = "vdd_arm"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1450000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_io: DCDC_REG4 { + regulator-name = "vcc_io"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_18: LDO_REG1 { + regulator-name = "vcc_18"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc18_emmc: LDO_REG2 { + regulator-name = "vcc18_emmc"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_10: LDO_REG3 { + regulator-name = "vdd_10"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + }; + }; +}; + +&io_domains { + pmuio-supply = <&vcc_io>; + vccio1-supply = <&vcc_io>; + vccio2-supply = <&vcc18_emmc>; + vccio3-supply = <&vcc_io>; + vccio4-supply = <&vcc_io>; + vccio5-supply = <&vcc_io>; + vccio6-supply = <&vcc_io>; + status = "okay"; +}; + +&pinctrl { + gmac2io { + eth_phy_reset_pin: eth-phy-reset-pin { + rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + leds { + lan_led_pin: lan-led-pin { + rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + sys_led_pin: sys-led-pin { + rockchip,pins = <3 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wan_led_pin: wan-led-pin { + rockchip,pins = <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + lan { + lan_vdd_pin: lan-vdd-pin { + rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&pwm2 { + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-sd-highspeed; + disable-wp; + pinctrl-0 = <&sdmmc0_clk>, <&sdmmc0_cmd>, <&sdmmc0_dectn>, <&sdmmc0_bus4>; + pinctrl-names = "default"; + vmmc-supply = <&vcc_sd>; + status = "okay"; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + }; +}; + +&tsadc { + rockchip,hw-tshut-mode = <0>; + rockchip,hw-tshut-polarity = <0>; + status = "okay"; +}; + +&u2phy { + status = "okay"; +}; + +&u2phy_host { + status = "okay"; +}; + +&u2phy_otg { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usb20_otg { + dr_mode = "host"; + status = "okay"; +}; + +&usbdrd3 { + dr_mode = "host"; + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + /* Second port is for USB 3.0 */ + rtl8153: device@2 { + compatible = "usbbda,8153"; + reg = <2>; + }; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts index aa22a0c22265..5d5d9574088c 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts @@ -96,7 +96,6 @@ linux,default-trigger = "heartbeat"; gpios = <&rk805 1 GPIO_ACTIVE_LOW>; default-state = "on"; - mode = <0x23>; }; user_led: led-1 { @@ -104,7 +103,6 @@ linux,default-trigger = "mmc1"; gpios = <&rk805 0 GPIO_ACTIVE_LOW>; default-state = "off"; - mode = <0x05>; }; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi index 6e29e74f6fc6..783120e9cebe 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi @@ -111,7 +111,7 @@ }; }; - dmc_opp_table: dmc_opp_table { + dmc_opp_table: opp-table-3 { compatible = "operating-points-v2"; opp00 { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts index 04403a76238b..a0795a2b1cb1 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts @@ -104,6 +104,13 @@ }; }; +&cpu_alert0 { + temperature = <65000>; +}; +&cpu_alert1 { + temperature = <68000>; +}; + &cpu_l0 { cpu-supply = <&vdd_cpu_l>; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi index bbf1e3f24585..c32913df93c3 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi @@ -735,7 +735,7 @@ flash@0 { compatible = "jedec,spi-nor"; reg = <0>; - spi-max-frequency = <10000000>; + spi-max-frequency = <30000000>; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts index 309c35d7fca8..028eb508ae30 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts @@ -15,8 +15,8 @@ compatible = "radxa,rock-4c-plus", "rockchip,rk3399"; aliases { - mmc0 = &sdmmc; - mmc1 = &sdhci; + mmc0 = &sdhci; + mmc1 = &sdmmc; }; chosen { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi index 1f76d3501bda..907071d4fe80 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi @@ -13,8 +13,8 @@ / { aliases { - mmc0 = &sdmmc; - mmc1 = &sdhci; + mmc0 = &sdhci; + mmc1 = &sdmmc; }; chosen { diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index 4391aea25984..1881b4b71f91 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -589,7 +589,7 @@ clocks = <&cru HCLK_M_CRYPTO0>, <&cru HCLK_S_CRYPTO0>, <&cru SCLK_CRYPTO0>; clock-names = "hclk_master", "hclk_slave", "sclk"; resets = <&cru SRST_CRYPTO0>, <&cru SRST_CRYPTO0_S>, <&cru SRST_CRYPTO0_M>; - reset-names = "master", "lave", "crypto"; + reset-names = "master", "slave", "crypto-rst"; }; crypto1: crypto@ff8b8000 { @@ -599,7 +599,7 @@ clocks = <&cru HCLK_M_CRYPTO1>, <&cru HCLK_S_CRYPTO1>, <&cru SCLK_CRYPTO1>; clock-names = "hclk_master", "hclk_slave", "sclk"; resets = <&cru SRST_CRYPTO1>, <&cru SRST_CRYPTO1_S>, <&cru SRST_CRYPTO1_M>; - reset-names = "master", "slave", "crypto"; + reset-names = "master", "slave", "crypto-rst"; }; i2c1: i2c@ff110000 { @@ -2241,13 +2241,11 @@ pcfg_input_pull_up: pcfg-input-pull-up { input-enable; bias-pull-up; - drive-strength = <2>; }; pcfg_input_pull_down: pcfg-input-pull-down { input-enable; bias-pull-down; - drive-strength = <2>; }; clock { diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi index bf9eb0405b62..8b8992a8e9c0 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi @@ -13,8 +13,8 @@ compatible = "vamrs,rk3399pro-vmarc-som", "rockchip,rk3399pro"; aliases { - mmc0 = &sdmmc; - mmc1 = &sdhci; + mmc0 = &sdhci; + mmc1 = &sdmmc; }; vcc3v3_pcie: vcc-pcie-regulator { diff --git a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353p.dts b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353p.dts index 63cff402f3a8..8aa93c646bec 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353p.dts +++ b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353p.dts @@ -95,6 +95,18 @@ pintctrl-names = "default"; pinctrl-0 = <&i2c2m1_xfer>; status = "okay"; + + touch@1a { + compatible = "hynitron,cst340"; + reg = <0x1a>; + interrupt-parent = <&gpio4>; + interrupts = <RK_PB1 IRQ_TYPE_EDGE_FALLING>; + pinctrl-0 = <&touch_rst>; + pinctrl-names = "default"; + reset-gpios = <&gpio4 RK_PA6 GPIO_ACTIVE_LOW>; + touchscreen-size-x = <640>; + touchscreen-size-y = <480>; + }; }; &pinctrl { @@ -104,6 +116,13 @@ <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; + + touch { + touch_rst: touch-rst { + rockchip,pins = + <4 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; }; &rk817 { diff --git a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353v.dts b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353v.dts index 885234a023e1..f49ce29ba597 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353v.dts +++ b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353v.dts @@ -82,6 +82,18 @@ pintctrl-names = "default"; pinctrl-0 = <&i2c2m1_xfer>; status = "okay"; + + touch@1a { + compatible = "hynitron,cst340"; + reg = <0x1a>; + interrupt-parent = <&gpio4>; + interrupts = <RK_PB1 IRQ_TYPE_EDGE_FALLING>; + pinctrl-0 = <&touch_rst>; + pinctrl-names = "default"; + reset-gpios = <&gpio4 RK_PA6 GPIO_ACTIVE_LOW>; + touchscreen-size-x = <640>; + touchscreen-size-y = <480>; + }; }; &pinctrl { diff --git a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg503.dts b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg503.dts index 5dafcc86296b..b4b2df821cba 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg503.dts +++ b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg503.dts @@ -47,6 +47,21 @@ mosi-gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>; cs-gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>; num-chipselects = <0>; + + panel@0 { + compatible = "samsung,ams495qa01"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_reset>; + reset-gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_LOW>; + vdd-supply = <&vcc_3v3>; + + port { + mipi_in_panel: endpoint { + remote-endpoint = <&mipi_out_panel>; + }; + }; + }; }; /* Channels reversed for both headphones and speakers. */ @@ -94,6 +109,32 @@ assigned-clock-rates = <1200000000>, <200000000>, <500000000>; }; +&dsi_dphy0 { + status = "okay"; +}; + +&dsi0 { + status = "okay"; + + ports { + dsi0_in: port@0 { + reg = <0>; + + dsi0_in_vp1: endpoint { + remote-endpoint = <&vp1_out_dsi0>; + }; + }; + + dsi0_out: port@1 { + reg = <1>; + + mipi_out_panel: endpoint { + remote-endpoint = <&mipi_in_panel>; + }; + }; + }; +}; + &gpio_keys_control { button-a { gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_LOW>; @@ -146,6 +187,13 @@ }; }; + gpio-lcd { + lcd_reset: lcd-reset { + rockchip,pins = + <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + gpio-spi { spi_pins: spi-pins { rockchip,pins = @@ -164,3 +212,10 @@ rockchip,sleep-filter-current-microamp = <100000>; }; }; + +&vp1 { + vp1_out_dsi0: endpoint@ROCKCHIP_VOP2_EP_MIPI0 { + reg = <ROCKCHIP_VOP2_EP_MIPI0>; + remote-endpoint = <&dsi0_in_vp1>; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts b/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts index 4c7f9abd594f..2671f207cfd1 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts +++ b/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts @@ -324,8 +324,12 @@ rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; }; + wifi_host_wake_h: wifi-host-wake-l { + rockchip,pins = <2 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + wifi_32k: wifi-32k { - rockchip,pins = <0 RK_PB0 2 &pcfg_pull_none>; + rockchip,pins = <2 RK_PC6 1 &pcfg_pull_none>; }; }; @@ -353,6 +357,17 @@ }; }; +&pmu_io_domains { + pmuio2-supply = <&vcc_3v3>; + vccio1-supply = <&vcc_3v3>; + vccio3-supply = <&vcc_3v3>; + vccio4-supply = <&vcca_1v8>; + vccio5-supply = <&vcc_3v3>; + vccio6-supply = <&vcca_1v8>; + vccio7-supply = <&vcc_3v3>; + status = "okay"; +}; + &pwm0 { status = "okay"; }; @@ -380,9 +395,15 @@ }; &sdmmc1 { + /* WiFi & BT combo module AMPAK AP6398S */ + #address-cells = <1>; + #size-cells = <0>; bus-width = <4>; + clock-frequency = <150000000>; + cap-sdio-irq; cap-sd-highspeed; - disable-wp; + sd-uhs-sdr104; + keep-power-in-suspend; mmc-pwrseq = <&sdio_pwrseq>; non-removable; pinctrl-names = "default"; @@ -390,6 +411,16 @@ vmmc-supply = <&vcc_3v3>; vqmmc-supply = <&vcca_1v8>; status = "okay"; + + brcmf: wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + interrupt-parent = <&gpio2>; + interrupts = <RK_PB2 GPIO_ACTIVE_HIGH>; + interrupt-names = "host-wake"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_host_wake_h>; + }; }; &spdif { diff --git a/arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts b/arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts new file mode 100644 index 000000000000..ff936b713579 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts @@ -0,0 +1,595 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/soc/rockchip,vop2.h> +#include "rk3566.dtsi" + +/ { + model = "EmbedFire LubanCat 1"; + compatible = "embedfire,lubancat-1", "rockchip,rk3566"; + + aliases { + ethernet0 = &gmac1; + mmc0 = &sdmmc0; + mmc1 = &sdhci; + }; + + chosen: chosen { + stdout-path = "serial2:1500000n8"; + }; + + gmac1_clkin: external-gmac1-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "gmac1_clkin"; + #clock-cells = <0>; + }; + + hdmi-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + sys_led: sys-led { + label = "sys_led"; + linux,default-trigger = "heartbeat"; + default-state = "on"; + gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&sys_led_pin>; + }; + }; + + usb_5v: usb-5v-regulator { + compatible = "regulator-fixed"; + regulator-name = "usb_5v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vcc5v0_sys: vcc5v0-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&usb_5v>; + }; + + vcc3v3_sys: vcc3v3-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc3v3_pcie: vcc3v3-pcie-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_pcie"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>; + startup-delay-us = <5000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_usb20_host: vcc5v0-usb20-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 RK_PB6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_usb20_host_en>; + regulator-name = "vcc5v0_usb20_host"; + regulator-always-on; + }; + + vcc5v0_usb30_host: vcc5v0-usb30-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_usb30_host_en>; + regulator-name = "vcc5v0_usb30_host"; + regulator-always-on; + }; +}; + +&uart2 { + status = "okay"; +}; + +&combphy1 { + status = "okay"; +}; + +&combphy2 { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu1 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu2 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu3 { + cpu-supply = <&vdd_cpu>; +}; + +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&hdmi { + avdd-0v9-supply = <&vdda0v9_image>; + avdd-1v8-supply = <&vcca1v8_image>; + status = "okay"; +}; + +&hdmi_in { + hdmi_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi>; + }; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&hdmi_sound { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + vdd_cpu: regulator@1c { + compatible = "tcs,tcs4525"; + reg = <0x1c>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1150000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + rk809: pmic@20 { + compatible = "rockchip,rk809"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; + clock-output-names = "rk808-clkout1", "rk808-clkout2"; + + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int>; + rockchip,system-power-controller; + wakeup-source; + #clock-cells = <1>; + + vcc1-supply = <&vcc3v3_sys>; + vcc2-supply = <&vcc3v3_sys>; + vcc3-supply = <&vcc3v3_sys>; + vcc4-supply = <&vcc3v3_sys>; + vcc5-supply = <&vcc3v3_sys>; + vcc6-supply = <&vcc3v3_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc3v3_sys>; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-name = "vdd_logic"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-init-microvolt = <900000>; + regulator-ramp-delay = <6001>; + regulator-initial-mode = <0x2>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: DCDC_REG2 { + regulator-name = "vdd_gpu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-init-microvolt = <900000>; + regulator-ramp-delay = <6001>; + regulator-initial-mode = <0x2>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vdd_npu: DCDC_REG4 { + regulator-name = "vdd_npu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-init-microvolt = <900000>; + regulator-ramp-delay = <6001>; + regulator-initial-mode = <0x2>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG5 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_image: LDO_REG1 { + regulator-name = "vdda0v9_image"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_0v9: LDO_REG2 { + regulator-name = "vdda_0v9"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_pmu: LDO_REG3 { + regulator-name = "vdda0v9_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vccio_acodec: LDO_REG4 { + regulator-name = "vccio_acodec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-name = "vccio_sd"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_pmu: LDO_REG6 { + regulator-name = "vcc3v3_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcca_1v8: LDO_REG7 { + regulator-name = "vcca_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca1v8_pmu: LDO_REG8 { + regulator-name = "vcca1v8_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca1v8_image: LDO_REG9 { + regulator-name = "vcca1v8_image"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3: SWITCH_REG1 { + regulator-name = "vcc_3v3"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_sd: SWITCH_REG2 { + regulator-name = "vcc3v3_sd"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&i2s1_8ch { + rockchip,trcm-sync-tx-only; + status = "okay"; +}; + +&gmac1 { + phy-mode = "rgmii"; + clock_in_out = "output"; + snps,reset-gpio = <&gpio2 RK_PB0 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + /* Reset time is 75ms, 100ms */ + snps,reset-delays-us = <0 75000 100000>; + assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; + assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>; + assigned-clock-rates = <0>, <125000000>; + pinctrl-names = "default"; + pinctrl-0 = <&gmac1m1_miim + &gmac1m1_tx_bus2_level3 + &gmac1m1_rx_bus2 + &gmac1m1_rgmii_clk_level2 + &gmac1m1_rgmii_bus_level3>; + tx_delay = <0x1a>; + rx_delay = <0x0c>; + phy-handle = <&rgmii_phy1>; + status = "okay"; +}; + +&mdio1 { + rgmii_phy1: phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x0>; + }; +}; + +&pcie2x1 { + reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; + disable-gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie>; + status = "okay"; +}; + +&pinctrl { + leds { + sys_led_pin: sys-status-led-pin { + rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb { + vcc5v0_usb20_host_en: vcc5v0-usb20-host-en { + rockchip,pins = <2 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + vcc5v0_usb30_host_en: vcc5v0-usb30-host-en { + rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int: pmic_int { + rockchip,pins = + <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&pmu_io_domains { + pmuio2-supply = <&vcc3v3_pmu>; + vccio1-supply = <&vccio_acodec>; + vccio3-supply = <&vccio_sd>; + vccio4-supply = <&vcc_3v3>; + vccio5-supply = <&vcc_3v3>; + vccio6-supply = <&vcc_1v8>; + vccio7-supply = <&vcc_3v3>; + status = "okay"; +}; + +&saradc { + vref-supply = <&vcca_1v8>; + status = "okay"; +}; + +&tsadc { + rockchip,hw-tshut-mode = <1>; + rockchip,hw-tshut-polarity = <0>; + status = "okay"; +}; + +&sdhci { + assigned-clocks = <&cru BCLK_EMMC>, <&cru TCLK_EMMC>, <&cru CCLK_EMMC>; + assigned-clock-rates = <200000000>, <24000000>, <200000000>; + bus-width = <8>; + max-frequency = <200000000>; + mmc-hs200-1_8v; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>; + supports-emmc; + status = "okay"; +}; + +&sdmmc0 { + max-frequency = <150000000>; + supports-sd; + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + sd-uhs-sdr104; + vmmc-supply = <&vcc3v3_sd>; + vqmmc-supply = <&vccio_sd>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; + status = "okay"; +}; + +/* USB OTG/USB Host_1 USB 2.0 Comb */ +&usb2phy0 { + status = "okay"; +}; + +&usb2phy0_host { + status = "okay"; +}; + +&usb2phy0_otg { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +/* USB Host_2/USB Host_3 USB 2.0 Comb */ +&usb2phy1 { + status = "okay"; +}; + +&usb2phy1_host { + status = "okay"; +}; + +&usb2phy1_otg { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +/* USB3.0 Host */ +&usb_host1_xhci { + status = "okay"; +}; + +&vop { + assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; + assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = <ROCKCHIP_VOP2_EP_HDMI0>; + remote-endpoint = <&hdmi_in_vp0>; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts new file mode 100644 index 000000000000..d89d5263cb5e --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts @@ -0,0 +1,272 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2022 Radxa Limited + * Copyright (c) 2022 Amarula Solutions(India) + */ + +/dts-v1/; +#include <dt-bindings/soc/rockchip,vop2.h> +#include "rk3566.dtsi" +#include "rk3566-radxa-cm3.dtsi" + +/ { + model = "Radxa Compute Module 3(CM3) IO Board"; + compatible = "radxa,cm3-io", "radxa,cm3", "rockchip,rk3566"; + + aliases { + mmc1 = &sdmmc0; + }; + + chosen: chosen { + stdout-path = "serial2:1500000n8"; + }; + + gmac1_clkin: external-gmac1-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "gmac1_clkin"; + #clock-cells = <0>; + }; + + hdmi-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-1 { + gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_ACTIVITY; + linux,default-trigger = "heartbeat"; + pinctrl-names = "default"; + pinctrl-0 = <&pi_nled_activity>; + }; + }; + + vcc5v0_usb30: vcc5v0-usb30-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb30"; + enable-active-high; + gpio = <&gpio3 RK_PC2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_usb30_en_h>; + regulator-always-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_sys>; + }; + + vcca1v8_image: vcca1v8-image-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcca1v8_image"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_1v8_p>; + }; + + vdda0v9_image: vdda0v9-image-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcca0v9_image"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + vin-supply = <&vdda_0v9>; + }; +}; + +&combphy1 { + status = "okay"; +}; + +&gmac1 { + assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; + assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&gmac1_clkin>; + assigned-clock-rates = <0>, <125000000>; + clock_in_out = "input"; + phy-handle = <&rgmii_phy1>; + phy-mode = "rgmii"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac1m0_miim + &gmac1m0_tx_bus2 + &gmac1m0_rx_bus2 + &gmac1m0_rgmii_clk + &gmac1m0_rgmii_bus + &gmac1m0_clkinout>; + snps,reset-gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + /* Reset time is 20ms, 100ms for rtl8211f */ + snps,reset-delays-us = <0 20000 100000>; + tx_delay = <0x46>; + rx_delay = <0x2e>; + status = "okay"; +}; + +&hdmi { + avdd-0v9-supply = <&vdda0v9_image>; + avdd-1v8-supply = <&vcca1v8_image>; + status = "okay"; +}; + +&hdmi_in { + hdmi_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi>; + }; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&hdmi_sound { + status = "okay"; +}; + +&mdio1 { + rgmii_phy1: ethernet-phy@0 { + compatible="ethernet-phy-ieee802.3-c22"; + reg= <0x0>; + }; +}; + +&pinctrl { + gmac1 { + gmac1m0_miim: gmac1m0-miim { + rockchip,pins = + /* gmac1_mdcm0 */ + <3 RK_PC4 3 &pcfg_pull_none_drv_level_15>, + /* gmac1_mdiom0 */ + <3 RK_PC5 3 &pcfg_pull_none_drv_level_15>; + }; + + gmac1m0_rx_bus2: gmac1m0-rx-bus2 { + rockchip,pins = + /* gmac1_rxd0m0 */ + <3 RK_PB1 3 &pcfg_pull_none_drv_level_15>, + /* gmac1_rxd1m0 */ + <3 RK_PB2 3 &pcfg_pull_none_drv_level_15>, + /* gmac1_rxdvcrsm0 */ + <3 RK_PB3 3 &pcfg_pull_none_drv_level_15>; + }; + + gmac1m0_tx_bus2: gmac1m0-tx-bus2 { + rockchip,pins = + /* gmac1_txd0m0 */ + <3 RK_PB5 3 &pcfg_pull_none_drv_level_15>, + /* gmac1_txd1m0 */ + <3 RK_PB6 3 &pcfg_pull_none_drv_level_15>, + /* gmac1_txenm0 */ + <3 RK_PB7 3 &pcfg_pull_none_drv_level_15>; + }; + + gmac1m0_rgmii_clk: gmac1m0-rgmii-clk { + rockchip,pins = + /* gmac1_rxclkm0 */ + <3 RK_PA7 3 &pcfg_pull_none_drv_level_15>, + /* gmac1_txclkm0 */ + <3 RK_PA6 3 &pcfg_pull_none_drv_level_15>; + }; + + gmac1m0_rgmii_bus: gmac1m0-rgmii-bus { + rockchip,pins = + /* gmac1_rxd2m0 */ + <3 RK_PA4 3 &pcfg_pull_none_drv_level_15>, + /* gmac1_rxd3m0 */ + <3 RK_PA5 3 &pcfg_pull_none_drv_level_15>, + /* gmac1_txd2m0 */ + <3 RK_PA2 3 &pcfg_pull_none_drv_level_15>, + /* gmac1_txd3m0 */ + <3 RK_PA3 3 &pcfg_pull_none_drv_level_15>; + }; + + gmac1m0_clkinout: gmac1m0-clkinout { + rockchip,pins = + /* gmac1_mclkinoutm0 */ + <3 RK_PC0 3 &pcfg_pull_none_drv_level_15>; + }; + }; + + leds { + pi_nled_activity: pi-nled-activity { + rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sdcard { + sdmmc_pwren: sdmmc-pwren { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb { + vcc5v0_usb30_en_h: vcc5v0-host-en-h { + rockchip,pins = <3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&sdmmc0 { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + vqmmc-supply = <&vccio_sd>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det &sdmmc0_pwren>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usb2phy0_host { + phy-supply = <&vcc5v0_usb30>; + status = "okay"; +}; + +&usb2phy1_host { + status = "okay"; +}; + +&usb2phy1_otg { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host1_xhci { + status = "okay"; +}; + +&vop { + assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; + assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = <ROCKCHIP_VOP2_EP_HDMI0>; + remote-endpoint = <&hdmi_in_vp0>; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi new file mode 100644 index 000000000000..45de2630bb50 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi @@ -0,0 +1,425 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2022 Radxa Limited + * Copyright (c) 2022 Amarula Solutions(India) + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> + +/ { + compatible = "radxa,cm3", "rockchip,rk3566"; + + aliases { + mmc0 = &sdhci; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_STATUS; + linux,default-trigger = "timer"; + default-state = "on"; + pinctrl-names = "default"; + pinctrl-0 = <&user_led2>; + }; + }; + + vcc_sys: vcc-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vcc_1v8: vcc-1v8-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_1v8_p>; + }; + + vcc_3v3: vcc-3v3-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc3v3_sys>; + }; + + vcca_1v8: vcca-1v8-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcca_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_1v8_p>; + }; + + sdio_pwrseq: pwrseq-sdio { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk817 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_reg_on_h>; + reset-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_LOW>; + }; +}; + +&cpu0 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu1 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu2 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu3 { + cpu-supply = <&vdd_cpu>; +}; + +&gpu { + mali-supply = <&vdd_gpu_npu>; + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + vdd_cpu: regulator@1c { + compatible = "tcs,tcs4525"; + reg = <0x1c>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1390000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + rk817: pmic@20 { + compatible = "rockchip,rk817"; + reg = <0x20>; + #clock-cells = <1>; + clock-output-names = "rk817-clkout1", "rk817-clkout2"; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc5-supply = <&vcc_sys>; + vcc6-supply = <&vcc_sys>; + vcc7-supply = <&vcc_sys>; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-name = "vdd_logic"; + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vdd_gpu_npu: DCDC_REG2 { + regulator-name = "vdd_gpu_npu"; + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc3v3_sys: DCDC_REG4 { + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcca1v8_pmu: LDO_REG1 { + regulator-name = "vcca1v8_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdda_0v9: LDO_REG2 { + regulator-name = "vdda_0v9"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_pmu: LDO_REG3 { + regulator-name = "vdda0v9_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vccio_acodec: LDO_REG4 { + regulator-name = "vccio_acodec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-name = "vccio_sd"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_pmu: LDO_REG6 { + regulator-name = "vcc3v3_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_1v8_p: LDO_REG7 { + regulator-name = "vcc_1v8_p"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc1v8_dvp: LDO_REG8 { + regulator-name = "vcc1v8_dvp"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc2v8_dvp: LDO_REG9 { + regulator-name = "vcc2v8_dvp"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + }; + }; +}; + +&pinctrl { + bluetooth { + bt_host_wake_h: bt-host-wake-h { + rockchip,pins = <2 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_reg_on_h: bt-reg-on-h { + rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_wake_host_h: bt-wake-host-h { + rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + leds { + user_led2: user-led2 { + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + wifi { + wifi_reg_on_h: wifi-reg-on-h { + rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wifi_host_wake_h: wifi-host-wake-h { + rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pmu_io_domains { + pmuio1-supply = <&vcc3v3_pmu>; + pmuio2-supply = <&vcc_3v3>; + vccio1-supply = <&vccio_acodec>; + vccio2-supply = <&vcc_1v8>; + vccio3-supply = <&vccio_sd>; + vccio4-supply = <&vcc_1v8>; + vccio5-supply = <&vcc_3v3>; + vccio6-supply = <&vcc_3v3>; + vccio7-supply = <&vcc_3v3>; + status = "okay"; +}; + +&saradc { + vref-supply = <&vcca_1v8>; + status = "okay"; +}; + +&sdmmc1 { + #address-cells = <1>; + #size-cells = <0>; + bus-width = <4>; + disable-wp; + cap-sd-highspeed; + cap-sdio-irq; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_clk &sdmmc1_cmd>; + sd-uhs-sdr104; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcc_1v8>; + status = "okay"; + + wifi@1 { + compatible = "brcm,bcm43455-fmac"; + reg = <1>; + interrupt-parent = <&gpio2>; + interrupts = <RK_PC1 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_host_wake_h>; + }; +}; + +&sdhci { + bus-width = <8>; + max-frequency = <200000000>; + mmc-hs200-1_8v; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcc_1v8>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1m0_ctsn &uart1m0_rtsn &uart1m0_xfer>; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm4345c5"; + clocks = <&rk817 1>; + clock-names = "lpo"; + device-wakeup-gpios = <&gpio2 RK_PB2 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_h &bt_reg_on_h &bt_wake_host_h>; + vbat-supply = <&vcc_3v3>; + vddio-supply = <&vcc_1v8>; + }; +}; + +&usb2phy0 { + status = "okay"; +}; + +&usb2phy1 { + status = "okay"; +}; + +&tsadc { + rockchip,hw-tshut-mode = <1>; + rockchip,hw-tshut-polarity = <0>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts b/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts index 61c7a3ad7387..42889c5900bd 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts +++ b/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts @@ -53,6 +53,22 @@ }; }; + rk809-sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,name = "STATION-M2-FRONT"; + simple-audio-card,mclk-fs = <256>; + status = "okay"; + + simple-audio-card,cpu { + sound-dai = <&i2s1_8ch>; + }; + + simple-audio-card,codec { + sound-dai = <&rk809>; + }; + }; + sdio_pwrseq: sdio-pwrseq { status = "okay"; compatible = "mmc-pwrseq-simple"; @@ -200,6 +216,10 @@ }; }; +&hdmi_sound { + status = "okay"; +}; + &i2c0 { status = "okay"; @@ -226,12 +246,16 @@ interrupt-parent = <&gpio0>; interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>; clock-output-names = "rk808-clkout1", "rk808-clkout2"; - + assigned-clocks = <&cru I2S1_MCLKOUT_TX>; + assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; + clock-names = "mclk"; + clocks = <&cru I2S1_MCLKOUT_TX>; pinctrl-names = "default"; - pinctrl-0 = <&pmic_int>; + pinctrl-0 = <&pmic_int>, <&i2s1m0_mclk>; rockchip,system-power-controller; wakeup-source; #clock-cells = <1>; + #sound-dai-cells = <0>; vcc1-supply = <&vcc3v3_sys>; vcc2-supply = <&vcc3v3_sys>; @@ -243,6 +267,10 @@ vcc8-supply = <&vcc3v3_sys>; vcc9-supply = <&vcc3v3_sys>; + codec { + mic-in-differential; + }; + regulators { vdd_log: DCDC_REG1 { regulator-name = "vdd_log"; @@ -452,6 +480,18 @@ status = "okay"; }; +&i2s0_8ch { + status = "okay"; +}; + +&i2s1_8ch { + pinctrl-0 = <&i2s1m0_sclktx &i2s1m0_sclkrx + &i2s1m0_lrcktx &i2s1m0_lrckrx + &i2s1m0_sdi0 &i2s1m0_sdo0>; + rockchip,trcm-sync-tx-only; + status = "okay"; +}; + &mdio1 { rgmii_phy1: ethernet-phy@0 { compatible = "ethernet-phy-ieee802.3-c22"; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts index 26d7fda275ed..ff0bf24cc1a2 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts +++ b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts @@ -66,6 +66,13 @@ }; }; + ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ir_receiver_pin>; + }; + vcc3v3_sys: vcc3v3-sys-regulator { compatible = "regulator-fixed"; regulator-name = "vcc3v3_sys"; @@ -614,6 +621,12 @@ }; }; + ir-receiver { + ir_receiver_pin: ir-receiver-pin { + rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + pcie { minipcie_enable_h: minipcie-enable-h { rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none_drv_level_5>; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-lubancat-2.dts b/arch/arm64/boot/dts/rockchip/rk3568-lubancat-2.dts new file mode 100644 index 000000000000..e653b067aa5d --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3568-lubancat-2.dts @@ -0,0 +1,733 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/* + * Copyright (c) 2021 Rockchip Electronics Co., Ltd. + * Copyright (c) 2022 EmbedFire <embedfire@embedfire.com> + */ + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/soc/rockchip,vop2.h> +#include "rk3568.dtsi" + +/ { + model = "EmbedFire LubanCat 2"; + compatible = "embedfire,lubancat-2", "rockchip,rk3568"; + + aliases { + ethernet0 = &gmac0; + ethernet1 = &gmac1; + mmc0 = &sdmmc0; + mmc1 = &sdhci; + }; + + chosen: chosen { + stdout-path = "serial2:1500000n8"; + }; + + leds { + compatible = "gpio-leds"; + + user_led: user-led { + label = "user_led"; + linux,default-trigger = "heartbeat"; + default-state = "on"; + gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&user_led_pin>; + }; + }; + + hdmi-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + dc_5v: dc-5v-regulator { + compatible = "regulator-fixed"; + regulator-name = "dc_5v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vcc3v3_sys: vcc3v3-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_sys: vcc5v0-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_5v>; + }; + + vcc3v3_m2_pcie: vcc3v3-m2-pcie-regulator { + compatible = "regulator-fixed"; + regulator-name = "m2_pcie_3v3"; + enable-active-high; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&vcc3v3_m2_pcie_en>; + pinctrl-names = "default"; + startup-delay-us = <200000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc3v3_mini_pcie: vcc3v3-mini-pcie-regulator { + compatible = "regulator-fixed"; + regulator-name = "minipcie_3v3"; + enable-active-high; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 RK_PC3 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&vcc3v3_mini_pcie_en>; + pinctrl-names = "default"; + startup-delay-us = <5000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_usb20_host: vcc5v0-usb20-host-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb20_host"; + enable-active-high; + gpio = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&vcc5v0_usb20_host_en>; + pinctrl-names = "default"; + }; + + vcc5v0_usb30_host: vcc5v0-usb30-host-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb30_host"; + enable-active-high; + gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&vcc5v0_usb30_host_en>; + pinctrl-names = "default"; + }; + + vcc5v0_otg_vbus: vcc5v0-otg-vbus-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_otg_vbus"; + enable-active-high; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&vcc5v0_otg_vbus_en>; + pinctrl-names = "default"; + }; +}; + +&combphy0 { + status = "okay"; +}; + +&combphy1 { + status = "okay"; +}; + +&combphy2 { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu1 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu2 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu3 { + cpu-supply = <&vdd_cpu>; +}; + +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&hdmi { + avdd-0v9-supply = <&vdda0v9_image>; + avdd-1v8-supply = <&vcca1v8_image>; + status = "okay"; +}; + +&hdmi_in { + hdmi_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi>; + }; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&hdmi_sound { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + vdd_cpu: regulator@1c { + compatible = "tcs,tcs4525"; + reg = <0x1c>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1150000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + rk809: pmic@20 { + compatible = "rockchip,rk809"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; + assigned-clocks = <&cru I2S1_MCLKOUT_TX>; + assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; + #clock-cells = <1>; + clock-names = "mclk"; + clocks = <&cru I2S1_MCLKOUT_TX>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int>; + rockchip,system-power-controller; + #sound-dai-cells = <0>; + vcc1-supply = <&vcc3v3_sys>; + vcc2-supply = <&vcc3v3_sys>; + vcc3-supply = <&vcc3v3_sys>; + vcc4-supply = <&vcc3v3_sys>; + vcc5-supply = <&vcc3v3_sys>; + vcc6-supply = <&vcc3v3_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc3v3_sys>; + wakeup-source; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-name = "vdd_logic"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-init-microvolt = <900000>; + regulator-ramp-delay = <6001>; + regulator-initial-mode = <0x2>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: DCDC_REG2 { + regulator-name = "vdd_gpu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-init-microvolt = <900000>; + regulator-ramp-delay = <6001>; + regulator-initial-mode = <0x2>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vdd_npu: DCDC_REG4 { + regulator-name = "vdd_npu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-init-microvolt = <900000>; + regulator-ramp-delay = <6001>; + regulator-initial-mode = <0x2>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG5 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_image: LDO_REG1 { + regulator-name = "vdda0v9_image"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_0v9: LDO_REG2 { + regulator-name = "vdda_0v9"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_pmu: LDO_REG3 { + regulator-name = "vdda0v9_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vccio_acodec: LDO_REG4 { + regulator-name = "vccio_acodec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-name = "vccio_sd"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_pmu: LDO_REG6 { + regulator-name = "vcc3v3_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcca_1v8: LDO_REG7 { + regulator-name = "vcca_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca1v8_pmu: LDO_REG8 { + regulator-name = "vcca1v8_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca1v8_image: LDO_REG9 { + regulator-name = "vcca1v8_image"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3: SWITCH_REG1 { + regulator-name = "vcc_3v3"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_sd: SWITCH_REG2 { + regulator-name = "vcc3v3_sd"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&i2s1_8ch { + rockchip,trcm-sync-tx-only; + status = "okay"; +}; + +&gmac0 { + phy-mode = "rgmii"; + clock_in_out = "output"; + + snps,reset-gpio = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + /* Reset time is 20ms, 100ms for rtl8211f */ + snps,reset-delays-us = <0 20000 100000>; + + assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>; + assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>; + + pinctrl-names = "default"; + pinctrl-0 = <&gmac0_miim + &gmac0_tx_bus2 + &gmac0_rx_bus2 + &gmac0_rgmii_clk + &gmac0_rgmii_bus>; + + tx_delay = <0x22>; + rx_delay = <0x0e>; + + phy-handle = <&rgmii_phy0>; + status = "okay"; +}; + +&mdio0 { + rgmii_phy0: phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x0>; + }; +}; + +&gmac1 { + phy-mode = "rgmii"; + clock_in_out = "output"; + + snps,reset-gpio = <&gpio3 RK_PA2 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + /* Reset time is 20ms, 100ms for rtl8211f */ + snps,reset-delays-us = <0 20000 100000>; + + assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; + assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>; + + pinctrl-names = "default"; + pinctrl-0 = <&gmac1m1_miim + &gmac1m1_tx_bus2 + &gmac1m1_rx_bus2 + &gmac1m1_rgmii_clk + &gmac1m1_rgmii_bus>; + + tx_delay = <0x21>; + rx_delay = <0x0e>; + + phy-handle = <&rgmii_phy1>; + status = "okay"; +}; + +&mdio1 { + rgmii_phy1: phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x0>; + }; +}; + +&gic { + mbi-ranges = <94 31>, <229 31>, <289 31>; +}; + +&pcie30phy { + status = "okay"; +}; + +&pcie3x2 { + reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_m2_pcie>; + status = "okay"; +}; + +&pcie2x1 { + reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>; + disable-gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_mini_pcie>; + status = "okay"; +}; + +&pmu_io_domains { + pmuio2-supply = <&vcc3v3_pmu>; + vccio1-supply = <&vccio_acodec>; + vccio3-supply = <&vccio_sd>; + vccio4-supply = <&vcc_1v8>; + vccio5-supply = <&vcc_3v3>; + vccio6-supply = <&vcc_1v8>; + vccio7-supply = <&vcc_3v3>; + status = "okay"; +}; + +&pwm8 { + status = "okay"; +}; + +&pwm9 { + status = "disabled"; +}; + +&pwm10 { + status = "disabled"; +}; + +&pwm14 { + status = "disabled"; +}; + +&spi3 { + pinctrl-0 = <&spi3m1_pins>; + status = "disabled"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3m1_xfer>; + status = "disabled"; +}; + +&saradc { + vref-supply = <&vcca_1v8>; + status = "okay"; +}; + +&tsadc { + rockchip,hw-tshut-mode = <1>; + rockchip,hw-tshut-polarity = <0>; + status = "okay"; +}; + +&sdhci { + assigned-clocks = <&cru BCLK_EMMC>, <&cru TCLK_EMMC>, <&cru CCLK_EMMC>; + assigned-clock-rates = <200000000>, <24000000>, <200000000>; + bus-width = <8>; + max-frequency = <200000000>; + mmc-hs200-1_8v; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>; + supports-emmc; + status = "okay"; +}; + +&sdmmc0 { + max-frequency = <150000000>; + no-sdio; + no-mmc; + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + sd-uhs-sdr104; + vmmc-supply = <&vcc3v3_sd>; + vqmmc-supply = <&vccio_sd>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; + status = "okay"; +}; + +/* USB OTG/USB Host_1 USB 2.0 Comb */ +&usb2phy0 { + status = "okay"; +}; + +&usb2phy0_host { + phy-supply = <&vcc5v0_usb30_host>; + status = "okay"; +}; + +&usb2phy0_otg { + phy-supply = <&vcc5v0_otg_vbus>; + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +/* USB Host_2/USB Host_3 USB 2.0 Comb */ +&usb2phy1 { + status = "okay"; +}; + +&usb2phy1_host { + status = "okay"; +}; + +&usb2phy1_otg { + phy-supply = <&vcc5v0_usb20_host>; + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +/* MULTI_PHY0 For SATA0, USB3.0 OTG Only USB2.0 */ +&usb_host0_xhci { + phys = <&usb2phy0_otg>; + phy-names = "usb2-phy"; + extcon = <&usb2phy0>; + maximum-speed = "high-speed"; + dr_mode = "host"; + status = "okay"; +}; + +&sata0 { + status = "okay"; +}; + +/* USB3.0 Host */ +&usb_host1_xhci { + status = "okay"; +}; + +&vop { + assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; + assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = <ROCKCHIP_VOP2_EP_HDMI0>; + remote-endpoint = <&hdmi_in_vp0>; + }; +}; + +&pinctrl { + leds { + user_led_pin: user-status-led-pin { + rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb { + vcc5v0_usb20_host_en: vcc5v0-usb20-host-en { + rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + vcc5v0_usb30_host_en: vcc5v0-usb30-host-en { + rockchip,pins = <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + vcc5v0_otg_vbus_en: vcc5v0-otg-vbus-en { + rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pcie { + vcc3v3_m2_pcie_en: vcc3v3-m2-pcie-en { + rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + vcc3v3_mini_pcie_en: vcc3v3-mini-pcie-en { + rockchip,pins = <3 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int: pmic-int { + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-pinctrl.dtsi b/arch/arm64/boot/dts/rockchip/rk3568-pinctrl.dtsi index 8f90c66dd9e9..0a979bfb63d9 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-pinctrl.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3568-pinctrl.dtsi @@ -3117,4 +3117,98 @@ <0 RK_PA1 0 &pcfg_pull_none>; }; }; + + lcdc { + /omit-if-no-ref/ + lcdc_clock: lcdc-clock { + rockchip,pins = + /* lcdc_clk */ + <3 RK_PA0 1 &pcfg_pull_none>, + /* lcdc_den */ + <3 RK_PC3 1 &pcfg_pull_none>, + /* lcdc_hsync */ + <3 RK_PC1 1 &pcfg_pull_none>, + /* lcdc_vsync */ + <3 RK_PC2 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + lcdc_data16: lcdc-data16 { + rockchip,pins = + /* lcdc_d3 */ + <2 RK_PD3 1 &pcfg_pull_none>, + /* lcdc_d4 */ + <2 RK_PD4 1 &pcfg_pull_none>, + /* lcdc_d5 */ + <2 RK_PD5 1 &pcfg_pull_none>, + /* lcdc_d6 */ + <2 RK_PD6 1 &pcfg_pull_none>, + /* lcdc_d7 */ + <2 RK_PD7 1 &pcfg_pull_none>, + /* lcdc_d10 */ + <3 RK_PA3 1 &pcfg_pull_none>, + /* lcdc_d11 */ + <3 RK_PA4 1 &pcfg_pull_none>, + /* lcdc_d12 */ + <3 RK_PA5 1 &pcfg_pull_none>, + /* lcdc_d13 */ + <3 RK_PA6 1 &pcfg_pull_none>, + /* lcdc_d14 */ + <3 RK_PA7 1 &pcfg_pull_none>, + /* lcdc_d15 */ + <3 RK_PB0 1 &pcfg_pull_none>, + /* lcdc_d19 */ + <3 RK_PB4 1 &pcfg_pull_none>, + /* lcdc_d20 */ + <3 RK_PB5 1 &pcfg_pull_none>, + /* lcdc_d21 */ + <3 RK_PB6 1 &pcfg_pull_none>, + /* lcdc_d22 */ + <3 RK_PB7 1 &pcfg_pull_none>, + /* lcdc_d23 */ + <3 RK_PC0 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + lcdc_data18: lcdc-data18 { + rockchip,pins = + /* lcdc_d2 */ + <2 RK_PD2 1 &pcfg_pull_none>, + /* lcdc_d3 */ + <2 RK_PD3 1 &pcfg_pull_none>, + /* lcdc_d4 */ + <2 RK_PD4 1 &pcfg_pull_none>, + /* lcdc_d5 */ + <2 RK_PD5 1 &pcfg_pull_none>, + /* lcdc_d6 */ + <2 RK_PD6 1 &pcfg_pull_none>, + /* lcdc_d7 */ + <2 RK_PD7 1 &pcfg_pull_none>, + /* lcdc_d10 */ + <3 RK_PA3 1 &pcfg_pull_none>, + /* lcdc_d11 */ + <3 RK_PA4 1 &pcfg_pull_none>, + /* lcdc_d12 */ + <3 RK_PA5 1 &pcfg_pull_none>, + /* lcdc_d13 */ + <3 RK_PA6 1 &pcfg_pull_none>, + /* lcdc_d14 */ + <3 RK_PA7 1 &pcfg_pull_none>, + /* lcdc_d15 */ + <3 RK_PB0 1 &pcfg_pull_none>, + /* lcdc_d18 */ + <3 RK_PB3 1 &pcfg_pull_none>, + /* lcdc_d19 */ + <3 RK_PB4 1 &pcfg_pull_none>, + /* lcdc_d20 */ + <3 RK_PB5 1 &pcfg_pull_none>, + /* lcdc_d21 */ + <3 RK_PB6 1 &pcfg_pull_none>, + /* lcdc_d22 */ + <3 RK_PB7 1 &pcfg_pull_none>, + /* lcdc_d23 */ + <3 RK_PC0 1 &pcfg_pull_none>; + }; + }; + }; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-radxa-cm3i.dtsi b/arch/arm64/boot/dts/rockchip/rk3568-radxa-cm3i.dtsi new file mode 100644 index 000000000000..c50fbdd48680 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3568-radxa-cm3i.dtsi @@ -0,0 +1,415 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include "rk3568.dtsi" + +/ { + compatible = "radxa,cm3i", "rockchip,rk3568"; + + aliases { + mmc0 = &sdhci; + }; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + gpio-leds { + compatible = "gpio-leds"; + + led_user: led-0 { + gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; + function = LED_FUNCTION_HEARTBEAT; + color = <LED_COLOR_ID_GREEN>; + linux,default-trigger = "heartbeat"; + pinctrl-names = "default"; + pinctrl-0 = <&led_user_en>; + }; + }; + + pcie30_avdd0v9: pcie30-avdd0v9-regulator { + compatible = "regulator-fixed"; + regulator-name = "pcie30_avdd0v9"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + vin-supply = <&vcc3v3_sys>; + }; + + pcie30_avdd1v8: pcie30-avdd1v8-regulator { + compatible = "regulator-fixed"; + regulator-name = "pcie30_avdd1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc3v3_sys>; + }; + + vcc3v3_sys: vcc3v3-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc5v_input>; + }; + + vcc5v0_sys: vcc5v0-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v_input>; + }; + + /* labeled +5v_input in schematic */ + vcc5v_input: vcc5v-input-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v_input"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; +}; + +&combphy0 { + status = "okay"; +}; + +&combphy1 { + status = "okay"; +}; + +&combphy2 { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu1 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu2 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu3 { + cpu-supply = <&vdd_cpu>; +}; + +&display_subsystem { + status = "disabled"; +}; + +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + vdd_cpu: regulator@1c { + compatible = "tcs,tcs4525"; + reg = <0x1c>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1150000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v_input>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + rk809: pmic@20 { + compatible = "rockchip,rk809"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc3v3_sys>; + vcc2-supply = <&vcc3v3_sys>; + vcc3-supply = <&vcc3v3_sys>; + vcc4-supply = <&vcc3v3_sys>; + vcc5-supply = <&vcc3v3_sys>; + vcc6-supply = <&vcc3v3_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc3v3_sys>; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-name = "vdd_logic"; + regulator-always-on; + regulator-boot-on; + regulator-init-microvolt = <900000>; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: DCDC_REG2 { + regulator-name = "vdd_gpu"; + regulator-always-on; + regulator-init-microvolt = <900000>; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vdd_npu: DCDC_REG4 { + regulator-name = "vdd_npu"; + regulator-init-microvolt = <900000>; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG5 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_image: LDO_REG1 { + regulator-name = "vdda0v9_image"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_0v9: LDO_REG2 { + regulator-name = "vdda_0v9"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_pmu: LDO_REG3 { + regulator-name = "vdda0v9_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vccio_acodec: LDO_REG4 { + regulator-name = "vccio_acodec"; + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-name = "vccio_sd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_pmu: LDO_REG6 { + regulator-name = "vcc3v3_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcca_1v8: LDO_REG7 { + regulator-name = "vcca_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca1v8_pmu: LDO_REG8 { + regulator-name = "vcca1v8_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca1v8_image: LDO_REG9 { + regulator-name = "vcca1v8_image"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3: SWITCH_REG1 { + regulator-name = "vcc_3v3"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_sd: SWITCH_REG2 { + regulator-name = "vcc3v3_sd"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&pinctrl { + leds { + led_user_en: led_user_en { + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int: pmic_int { + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&pmu_io_domains { + pmuio1-supply = <&vcc3v3_pmu>; + pmuio2-supply = <&vcc3v3_pmu>; + vccio1-supply = <&vccio_acodec>; + vccio2-supply = <&vcc_1v8>; + vccio3-supply = <&vccio_sd>; + vccio4-supply = <&vcc_1v8>; + vccio5-supply = <&vcc_3v3>; + vccio6-supply = <&vcc_1v8>; + vccio7-supply = <&vcc_3v3>; + status = "okay"; +}; + +&saradc { + vref-supply = <&vcca_1v8>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + max-frequency = <200000000>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcc_1v8>; + status = "okay"; +}; + +&tsadc { + rockchip,hw-tshut-mode = <1>; + rockchip,hw-tshut-polarity = <0>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usb2phy0 { + status = "okay"; +}; + +&usb2phy1 { + status = "okay"; +}; + +&usb_host0_xhci { + extcon = <&usb2phy0>; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts b/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts new file mode 100644 index 000000000000..63c4bd873188 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts @@ -0,0 +1,228 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; +#include "rk3568-radxa-cm3i.dtsi" + +/ { + model = "Radxa E25 Carrier Board"; + compatible = "radxa,e25", "radxa,cm3i", "rockchip,rk3568"; + + aliases { + mmc1 = &sdmmc0; + }; + + pwm-leds { + compatible = "pwm-leds-multicolor"; + + multi-led { + color = <LED_COLOR_ID_RGB>; + max-brightness = <255>; + + led-red { + color = <LED_COLOR_ID_RED>; + pwms = <&pwm1 0 1000000 0>; + }; + + led-green { + color = <LED_COLOR_ID_GREEN>; + pwms = <&pwm2 0 1000000 0>; + }; + + led-blue { + color = <LED_COLOR_ID_BLUE>; + pwms = <&pwm12 0 1000000 0>; + }; + }; + }; + + vbus_typec: vbus-typec-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vbus_typec_en>; + regulator-name = "vbus_typec"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc3v3_minipcie: vcc3v3-minipcie-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&minipcie_enable_h>; + regulator-name = "vcc3v3_minipcie"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc3v3_ngff: vcc3v3-ngff-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&ngffpcie_enable_h>; + regulator-name = "vcc3v3_ngff"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc5v0_sys>; + }; + + /* actually fed by vcc5v0_sys, dependent + * on pi6c clock generator + */ + vcc3v3_pcie30x1: vcc3v3-pcie30x1-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie30x1_enable_h>; + regulator-name = "vcc3v3_pcie30x1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc3v3_pi6c_05>; + }; + + vcc3v3_pi6c_05: vcc3v3-pi6c-05-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_enable_h>; + regulator-name = "vcc3v3_pcie"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&pcie2x1 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie20_reset_h>; + reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pi6c_05>; + status = "okay"; +}; + +&pcie30phy { + data-lanes = <1 2>; + status = "okay"; +}; + +&pcie3x1 { + num-lanes = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie30x1m0_pins>; + reset-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie30x1>; + status = "okay"; +}; + +&pcie3x2 { + num-lanes = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie30x2_reset_h>; + reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pi6c_05>; + status = "okay"; +}; + +&pinctrl { + pcie { + pcie20_reset_h: pcie20-reset-h { + rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pcie30x1_enable_h: pcie30x1-enable-h { + rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pcie30x2_reset_h: pcie30x2-reset-h { + rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pcie_enable_h: pcie-enable-h { + rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb { + minipcie_enable_h: minipcie-enable-h { + rockchip,pins = <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + ngffpcie_enable_h: ngffpcie-enable-h { + rockchip,pins = <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + vbus_typec_en: vbus_typec_en { + rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm1 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&pwm12 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm12m1_pins>; + status = "okay"; +}; + +&sdmmc0 { + bus-width = <4>; + cap-sd-highspeed; + cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; + /* Also used in pcie30x1_clkreqnm0 */ + disable-wp; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd>; + sd-uhs-sdr104; + vmmc-supply = <&vcc3v3_sd>; + vqmmc-supply = <&vccio_sd>; + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host0_xhci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usb2phy0_otg { + phy-supply = <&vbus_typec>; + status = "okay"; +}; + +&usb2phy1_host { + phy-supply = <&vcc3v3_minipcie>; + status = "okay"; +}; + +&usb2phy1_otg { + phy-supply = <&vcc3v3_ngff>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts index a1c5fdf7d68f..917f5b2b8aab 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts +++ b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts @@ -13,8 +13,8 @@ aliases { ethernet0 = &gmac1; - mmc0 = &sdmmc0; - mmc1 = &sdhci; + mmc0 = &sdhci; + mmc1 = &sdmmc0; }; chosen: chosen { @@ -279,6 +279,8 @@ &hdmi { avdd-0v9-supply = <&vdda0v9_image>; avdd-1v8-supply = <&vcca1v8_image>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmitx_scl &hdmitx_sda &hdmitxm1_cec>; status = "okay"; }; @@ -571,6 +573,8 @@ }; &i2s1_8ch { + pinctrl-names = "default"; + pinctrl-0 = <&i2s1m0_sclktx &i2s1m0_lrcktx &i2s1m0_sdi0 &i2s1m0_sdo0>; rockchip,trcm-sync-tx-only; status = "okay"; }; @@ -730,14 +734,13 @@ disable-wp; pinctrl-names = "default"; pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; - sd-uhs-sdr104; + sd-uhs-sdr50; vmmc-supply = <&vcc3v3_sd>; vqmmc-supply = <&vccio_sd>; status = "okay"; }; &sdmmc2 { - supports-sdio; bus-width = <4>; disable-wp; cap-sd-highspeed; diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi index 5706c3e24f0a..eed0059a68b8 100644 --- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi @@ -422,8 +422,9 @@ clock-names = "xin24m"; #clock-cells = <1>; #reset-cells = <1>; - assigned-clocks = <&cru PLL_GPLL>, <&pmucru PLL_PPLL>; - assigned-clock-rates = <1200000000>, <200000000>; + assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>, <&pmucru PLL_PPLL>; + assigned-clock-rates = <32768>, <1200000000>, <200000000>; + assigned-clock-parents = <&pmucru CLK_RTC32K_FRAC>; rockchip,grf = <&grf>; }; @@ -966,6 +967,7 @@ clock-names = "aclk_mst", "aclk_slv", "aclk_dbi", "pclk", "aux"; device_type = "pci"; + #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0 0 0 1 &pcie_intc 0>, <0 0 0 2 &pcie_intc 1>, diff --git a/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-io.dts b/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-io.dts new file mode 100644 index 000000000000..b51543892078 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-io.dts @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2022 Edgeble AI Technologies Pvt. Ltd. + */ + +/dts-v1/; +#include "rk3588.dtsi" +#include "rk3588-edgeble-neu6a.dtsi" + +/ { + model = "Edgeble Neu6A IO Board"; + compatible = "edgeble,neural-compute-module-6a-io", + "edgeble,neural-compute-module-6a", "rockchip,rk3588"; + + aliases { + serial2 = &uart2; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; +}; + +&uart2 { + pinctrl-0 = <&uart2m0_xfer>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a.dtsi new file mode 100644 index 000000000000..38e1a1e25f33 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a.dtsi @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2022 Edgeble AI Technologies Pvt. Ltd. + */ + +/ { + compatible = "edgeble,neural-compute-module-6a", "rockchip,rk3588"; + + aliases { + mmc0 = &sdhci; + }; + + vcc12v_dcin: vcc12v-dcin-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc12v_dcin"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; +}; + +&sdhci { + bus-width = <8>; + no-sdio; + no-sd; + non-removable; + max-frequency = <200000000>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts new file mode 100644 index 000000000000..b91af0204dbe --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts @@ -0,0 +1,129 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2021 Rockchip Electronics Co., Ltd. + * + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include "rk3588.dtsi" + +/ { + model = "Rockchip RK3588 EVB1 V10 Board"; + compatible = "rockchip,rk3588-evb1-v10", "rockchip,rk3588"; + + aliases { + mmc0 = &sdhci; + serial2 = &uart2; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + power-supply = <&vcc12v_dcin>; + pwms = <&pwm2 0 25000 0>; + }; + + vcc12v_dcin: vcc12v-dcin-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc12v_dcin"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + vcc5v0_sys: vcc5v0-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; + }; +}; + +&gmac0 { + clock_in_out = "output"; + phy-handle = <&rgmii_phy>; + phy-mode = "rgmii-rxid"; + pinctrl-0 = <&gmac0_miim + &gmac0_tx_bus2 + &gmac0_rx_bus2 + &gmac0_rgmii_clk + &gmac0_rgmii_bus>; + pinctrl-names = "default"; + rx_delay = <0x00>; + tx_delay = <0x43>; + status = "okay"; +}; + +&i2c2 { + status = "okay"; + + hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + clock-output-names = "hym8563"; + pinctrl-names = "default"; + pinctrl-0 = <&hym8563_int>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PD4 IRQ_TYPE_LEVEL_LOW>; + wakeup-source; + }; +}; + +&mdio0 { + rgmii_phy: ethernet-phy@1 { + /* RTL8211F */ + compatible = "ethernet-phy-id001c.c916"; + reg = <0x1>; + pinctrl-names = "default"; + pinctrl-0 = <&rtl8211f_rst>; + reset-assert-us = <20000>; + reset-deassert-us = <100000>; + reset-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>; + }; +}; + +&pinctrl { + rtl8211f { + rtl8211f_rst: rtl8211f-rst { + rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + }; + + hym8563 { + hym8563_int: hym8563-int { + rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&pwm2 { + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + no-sdio; + no-sd; + non-removable; + max-frequency = <200000000>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + status = "okay"; +}; + +&uart2 { + pinctrl-0 = <&uart2m0_xfer>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-pinctrl.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-pinctrl.dtsi new file mode 100644 index 000000000000..244c66faa161 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588-pinctrl.dtsi @@ -0,0 +1,516 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2021 Rockchip Electronics Co., Ltd. + */ + +#include <dt-bindings/pinctrl/rockchip.h> +#include "rockchip-pinconf.dtsi" + +/* + * This file is auto generated by pin2dts tool, please keep these code + * by adding changes at end of this file. + */ +&pinctrl { + clk32k { + /omit-if-no-ref/ + clk32k_out1: clk32k-out1 { + rockchip,pins = + /* clk32k_out1 */ + <2 RK_PC5 1 &pcfg_pull_none>; + }; + + }; + + eth0 { + /omit-if-no-ref/ + eth0_pins: eth0-pins { + rockchip,pins = + /* eth0_refclko_25m */ + <2 RK_PC3 1 &pcfg_pull_none>; + }; + + }; + + fspi { + /omit-if-no-ref/ + fspim1_pins: fspim1-pins { + rockchip,pins = + /* fspi_clk_m1 */ + <2 RK_PB3 3 &pcfg_pull_up_drv_level_2>, + /* fspi_cs0n_m1 */ + <2 RK_PB4 3 &pcfg_pull_up_drv_level_2>, + /* fspi_d0_m1 */ + <2 RK_PA6 3 &pcfg_pull_up_drv_level_2>, + /* fspi_d1_m1 */ + <2 RK_PA7 3 &pcfg_pull_up_drv_level_2>, + /* fspi_d2_m1 */ + <2 RK_PB0 3 &pcfg_pull_up_drv_level_2>, + /* fspi_d3_m1 */ + <2 RK_PB1 3 &pcfg_pull_up_drv_level_2>; + }; + + /omit-if-no-ref/ + fspim1_cs1: fspim1-cs1 { + rockchip,pins = + /* fspi_cs1n_m1 */ + <2 RK_PB5 3 &pcfg_pull_up_drv_level_2>; + }; + }; + + gmac0 { + /omit-if-no-ref/ + gmac0_miim: gmac0-miim { + rockchip,pins = + /* gmac0_mdc */ + <4 RK_PC4 1 &pcfg_pull_none>, + /* gmac0_mdio */ + <4 RK_PC5 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + gmac0_clkinout: gmac0-clkinout { + rockchip,pins = + /* gmac0_mclkinout */ + <4 RK_PC3 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + gmac0_rx_bus2: gmac0-rx-bus2 { + rockchip,pins = + /* gmac0_rxd0 */ + <2 RK_PC1 1 &pcfg_pull_none>, + /* gmac0_rxd1 */ + <2 RK_PC2 1 &pcfg_pull_none>, + /* gmac0_rxdv_crs */ + <4 RK_PC2 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + gmac0_tx_bus2: gmac0-tx-bus2 { + rockchip,pins = + /* gmac0_txd0 */ + <2 RK_PB6 1 &pcfg_pull_none>, + /* gmac0_txd1 */ + <2 RK_PB7 1 &pcfg_pull_none>, + /* gmac0_txen */ + <2 RK_PC0 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + gmac0_rgmii_clk: gmac0-rgmii-clk { + rockchip,pins = + /* gmac0_rxclk */ + <2 RK_PB0 1 &pcfg_pull_none>, + /* gmac0_txclk */ + <2 RK_PB3 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + gmac0_rgmii_bus: gmac0-rgmii-bus { + rockchip,pins = + /* gmac0_rxd2 */ + <2 RK_PA6 1 &pcfg_pull_none>, + /* gmac0_rxd3 */ + <2 RK_PA7 1 &pcfg_pull_none>, + /* gmac0_txd2 */ + <2 RK_PB1 1 &pcfg_pull_none>, + /* gmac0_txd3 */ + <2 RK_PB2 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + gmac0_ppsclk: gmac0-ppsclk { + rockchip,pins = + /* gmac0_ppsclk */ + <2 RK_PC4 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + gmac0_ppstring: gmac0-ppstring { + rockchip,pins = + /* gmac0_ppstring */ + <2 RK_PB5 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + gmac0_ptp_refclk: gmac0-ptp-refclk { + rockchip,pins = + /* gmac0_ptp_refclk */ + <2 RK_PB4 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + gmac0_txer: gmac0-txer { + rockchip,pins = + /* gmac0_txer */ + <4 RK_PC6 1 &pcfg_pull_none>; + }; + + }; + + hdmi { + /omit-if-no-ref/ + hdmim0_tx1_cec: hdmim0-tx1-cec { + rockchip,pins = + /* hdmim0_tx1_cec */ + <2 RK_PC4 4 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + hdmim0_tx1_scl: hdmim0-tx1-scl { + rockchip,pins = + /* hdmim0_tx1_scl */ + <2 RK_PB5 4 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + hdmim0_tx1_sda: hdmim0-tx1-sda { + rockchip,pins = + /* hdmim0_tx1_sda */ + <2 RK_PB4 4 &pcfg_pull_none>; + }; + }; + + i2c0 { + /omit-if-no-ref/ + i2c0m1_xfer: i2c0m1-xfer { + rockchip,pins = + /* i2c0_scl_m1 */ + <4 RK_PC5 9 &pcfg_pull_none_smt>, + /* i2c0_sda_m1 */ + <4 RK_PC6 9 &pcfg_pull_none_smt>; + }; + }; + + i2c2 { + /omit-if-no-ref/ + i2c2m1_xfer: i2c2m1-xfer { + rockchip,pins = + /* i2c2_scl_m1 */ + <2 RK_PC1 9 &pcfg_pull_none_smt>, + /* i2c2_sda_m1 */ + <2 RK_PC0 9 &pcfg_pull_none_smt>; + }; + }; + + i2c3 { + /omit-if-no-ref/ + i2c3m3_xfer: i2c3m3-xfer { + rockchip,pins = + /* i2c3_scl_m3 */ + <2 RK_PB2 9 &pcfg_pull_none_smt>, + /* i2c3_sda_m3 */ + <2 RK_PB3 9 &pcfg_pull_none_smt>; + }; + }; + + i2c4 { + /omit-if-no-ref/ + i2c4m1_xfer: i2c4m1-xfer { + rockchip,pins = + /* i2c4_scl_m1 */ + <2 RK_PB5 9 &pcfg_pull_none_smt>, + /* i2c4_sda_m1 */ + <2 RK_PB4 9 &pcfg_pull_none_smt>; + }; + }; + + i2c5 { + /omit-if-no-ref/ + i2c5m4_xfer: i2c5m4-xfer { + rockchip,pins = + /* i2c5_scl_m4 */ + <2 RK_PB6 9 &pcfg_pull_none_smt>, + /* i2c5_sda_m4 */ + <2 RK_PB7 9 &pcfg_pull_none_smt>; + }; + }; + + i2c6 { + /omit-if-no-ref/ + i2c6m2_xfer: i2c6m2-xfer { + rockchip,pins = + /* i2c6_scl_m2 */ + <2 RK_PC3 9 &pcfg_pull_none_smt>, + /* i2c6_sda_m2 */ + <2 RK_PC2 9 &pcfg_pull_none_smt>; + }; + }; + + i2c7 { + /omit-if-no-ref/ + i2c7m1_xfer: i2c7m1-xfer { + rockchip,pins = + /* i2c7_scl_m1 */ + <4 RK_PC3 9 &pcfg_pull_none_smt>, + /* i2c7_sda_m1 */ + <4 RK_PC4 9 &pcfg_pull_none_smt>; + }; + }; + + i2c8 { + /omit-if-no-ref/ + i2c8m1_xfer: i2c8m1-xfer { + rockchip,pins = + /* i2c8_scl_m1 */ + <2 RK_PB0 9 &pcfg_pull_none_smt>, + /* i2c8_sda_m1 */ + <2 RK_PB1 9 &pcfg_pull_none_smt>; + }; + }; + + i2s2 { + /omit-if-no-ref/ + i2s2m0_lrck: i2s2m0-lrck { + rockchip,pins = + /* i2s2m0_lrck */ + <2 RK_PC0 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s2m0_mclk: i2s2m0-mclk { + rockchip,pins = + /* i2s2m0_mclk */ + <2 RK_PB6 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s2m0_sclk: i2s2m0-sclk { + rockchip,pins = + /* i2s2m0_sclk */ + <2 RK_PB7 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s2m0_sdi: i2s2m0-sdi { + rockchip,pins = + /* i2s2m0_sdi */ + <2 RK_PC3 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s2m0_sdo: i2s2m0-sdo { + rockchip,pins = + /* i2s2m0_sdo */ + <4 RK_PC3 2 &pcfg_pull_none>; + }; + }; + + pwm2 { + /omit-if-no-ref/ + pwm2m2_pins: pwm2m2-pins { + rockchip,pins = + /* pwm2_m2 */ + <4 RK_PC2 11 &pcfg_pull_none>; + }; + }; + + pwm4 { + /omit-if-no-ref/ + pwm4m1_pins: pwm4m1-pins { + rockchip,pins = + /* pwm4_m1 */ + <4 RK_PC3 11 &pcfg_pull_none>; + }; + }; + + pwm5 { + /omit-if-no-ref/ + pwm5m2_pins: pwm5m2-pins { + rockchip,pins = + /* pwm5_m2 */ + <4 RK_PC4 11 &pcfg_pull_none>; + }; + }; + + pwm6 { + /omit-if-no-ref/ + pwm6m2_pins: pwm6m2-pins { + rockchip,pins = + /* pwm6_m2 */ + <4 RK_PC5 11 &pcfg_pull_none>; + }; + }; + + pwm7 { + /omit-if-no-ref/ + pwm7m3_pins: pwm7m3-pins { + rockchip,pins = + /* pwm7_ir_m3 */ + <4 RK_PC6 11 &pcfg_pull_none>; + }; + }; + + sdio { + /omit-if-no-ref/ + sdiom0_pins: sdiom0-pins { + rockchip,pins = + /* sdio_clk_m0 */ + <2 RK_PB3 2 &pcfg_pull_none>, + /* sdio_cmd_m0 */ + <2 RK_PB2 2 &pcfg_pull_none>, + /* sdio_d0_m0 */ + <2 RK_PA6 2 &pcfg_pull_none>, + /* sdio_d1_m0 */ + <2 RK_PA7 2 &pcfg_pull_none>, + /* sdio_d2_m0 */ + <2 RK_PB0 2 &pcfg_pull_none>, + /* sdio_d3_m0 */ + <2 RK_PB1 2 &pcfg_pull_none>; + }; + }; + + spi1 { + /omit-if-no-ref/ + spi1m0_pins: spi1m0-pins { + rockchip,pins = + /* spi1_clk_m0 */ + <2 RK_PC0 8 &pcfg_pull_up_drv_level_1>, + /* spi1_miso_m0 */ + <2 RK_PC1 8 &pcfg_pull_up_drv_level_1>, + /* spi1_mosi_m0 */ + <2 RK_PC2 8 &pcfg_pull_up_drv_level_1>; + }; + + /omit-if-no-ref/ + spi1m0_cs0: spi1m0-cs0 { + rockchip,pins = + /* spi1_cs0_m0 */ + <2 RK_PC3 8 &pcfg_pull_up_drv_level_1>; + }; + + /omit-if-no-ref/ + spi1m0_cs1: spi1m0-cs1 { + rockchip,pins = + /* spi1_cs1_m0 */ + <2 RK_PC4 8 &pcfg_pull_up_drv_level_1>; + }; + }; + + spi3 { + /omit-if-no-ref/ + spi3m0_pins: spi3m0-pins { + rockchip,pins = + /* spi3_clk_m0 */ + <4 RK_PC6 8 &pcfg_pull_up_drv_level_1>, + /* spi3_miso_m0 */ + <4 RK_PC4 8 &pcfg_pull_up_drv_level_1>, + /* spi3_mosi_m0 */ + <4 RK_PC5 8 &pcfg_pull_up_drv_level_1>; + }; + + /omit-if-no-ref/ + spi3m0_cs0: spi3m0-cs0 { + rockchip,pins = + /* spi3_cs0_m0 */ + <4 RK_PC2 8 &pcfg_pull_up_drv_level_1>; + }; + + /omit-if-no-ref/ + spi3m0_cs1: spi3m0-cs1 { + rockchip,pins = + /* spi3_cs1_m0 */ + <4 RK_PC3 8 &pcfg_pull_up_drv_level_1>; + }; + }; + + uart1 { + /omit-if-no-ref/ + uart1m0_xfer: uart1m0-xfer { + rockchip,pins = + /* uart1_rx_m0 */ + <2 RK_PB6 10 &pcfg_pull_up>, + /* uart1_tx_m0 */ + <2 RK_PB7 10 &pcfg_pull_up>; + }; + + /omit-if-no-ref/ + uart1m0_ctsn: uart1m0-ctsn { + rockchip,pins = + /* uart1m0_ctsn */ + <2 RK_PC1 10 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + uart1m0_rtsn: uart1m0-rtsn { + rockchip,pins = + /* uart1m0_rtsn */ + <2 RK_PC0 10 &pcfg_pull_none>; + }; + }; + + uart6 { + /omit-if-no-ref/ + uart6m0_xfer: uart6m0-xfer { + rockchip,pins = + /* uart6_rx_m0 */ + <2 RK_PA6 10 &pcfg_pull_up>, + /* uart6_tx_m0 */ + <2 RK_PA7 10 &pcfg_pull_up>; + }; + + /omit-if-no-ref/ + uart6m0_ctsn: uart6m0-ctsn { + rockchip,pins = + /* uart6m0_ctsn */ + <2 RK_PB1 10 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + uart6m0_rtsn: uart6m0-rtsn { + rockchip,pins = + /* uart6m0_rtsn */ + <2 RK_PB0 10 &pcfg_pull_none>; + }; + }; + + uart7 { + /omit-if-no-ref/ + uart7m0_xfer: uart7m0-xfer { + rockchip,pins = + /* uart7_rx_m0 */ + <2 RK_PB4 10 &pcfg_pull_up>, + /* uart7_tx_m0 */ + <2 RK_PB5 10 &pcfg_pull_up>; + }; + + /omit-if-no-ref/ + uart7m0_ctsn: uart7m0-ctsn { + rockchip,pins = + /* uart7m0_ctsn */ + <4 RK_PC6 10 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + uart7m0_rtsn: uart7m0-rtsn { + rockchip,pins = + /* uart7m0_rtsn */ + <4 RK_PC2 10 &pcfg_pull_none>; + }; + }; + + uart9 { + /omit-if-no-ref/ + uart9m0_xfer: uart9m0-xfer { + rockchip,pins = + /* uart9_rx_m0 */ + <2 RK_PC4 10 &pcfg_pull_up>, + /* uart9_tx_m0 */ + <2 RK_PC2 10 &pcfg_pull_up>; + }; + + /omit-if-no-ref/ + uart9m0_ctsn: uart9m0-ctsn { + rockchip,pins = + /* uart9m0_ctsn */ + <4 RK_PC5 10 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + uart9m0_rtsn: uart9m0-rtsn { + rockchip,pins = + /* uart9m0_rtsn */ + <4 RK_PC4 10 &pcfg_pull_none>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts new file mode 100644 index 000000000000..95805cb0adfa --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include "rk3588.dtsi" + +/ { + model = "Radxa ROCK 5 Model B"; + compatible = "radxa,rock-5b", "rockchip,rk3588"; + + aliases { + mmc0 = &sdhci; + serial2 = &uart2; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + vcc5v0_sys: vcc5v0-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; +}; + +&sdhci { + bus-width = <8>; + no-sdio; + no-sd; + non-removable; + max-frequency = <200000000>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + status = "okay"; +}; + +&uart2 { + pinctrl-0 = <&uart2m0_xfer>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3588.dtsi b/arch/arm64/boot/dts/rockchip/rk3588.dtsi new file mode 100644 index 000000000000..d085e57fbc4c --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588.dtsi @@ -0,0 +1,58 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2021 Rockchip Electronics Co., Ltd. + */ + +#include "rk3588s.dtsi" +#include "rk3588-pinctrl.dtsi" + +/ { + gmac0: ethernet@fe1b0000 { + compatible = "rockchip,rk3588-gmac", "snps,dwmac-4.20a"; + reg = <0x0 0xfe1b0000 0x0 0x10000>; + interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "macirq", "eth_wake_irq"; + clocks = <&cru CLK_GMAC_125M>, <&cru CLK_GMAC_50M>, + <&cru PCLK_GMAC0>, <&cru ACLK_GMAC0>, + <&cru CLK_GMAC0_PTP_REF>; + clock-names = "stmmaceth", "clk_mac_ref", + "pclk_mac", "aclk_mac", + "ptp_ref"; + power-domains = <&power RK3588_PD_GMAC>; + resets = <&cru SRST_A_GMAC0>; + reset-names = "stmmaceth"; + rockchip,grf = <&sys_grf>; + rockchip,php-grf = <&php_grf>; + snps,axi-config = <&gmac0_stmmac_axi_setup>; + snps,mixed-burst; + snps,mtl-rx-config = <&gmac0_mtl_rx_setup>; + snps,mtl-tx-config = <&gmac0_mtl_tx_setup>; + snps,tso; + status = "disabled"; + + mdio0: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <0x1>; + #size-cells = <0x0>; + }; + + gmac0_stmmac_axi_setup: stmmac-axi-config { + snps,blen = <0 0 0 0 16 8 4>; + snps,wr_osr_lmt = <4>; + snps,rd_osr_lmt = <8>; + }; + + gmac0_mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <2>; + queue0 {}; + queue1 {}; + }; + + gmac0_mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <2>; + queue0 {}; + queue1 {}; + }; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-pinctrl.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s-pinctrl.dtsi new file mode 100644 index 000000000000..48181671eacb --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588s-pinctrl.dtsi @@ -0,0 +1,3403 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2021 Rockchip Electronics Co., Ltd. + */ + +#include <dt-bindings/pinctrl/rockchip.h> +#include "rockchip-pinconf.dtsi" + +/* + * This file is auto generated by pin2dts tool, please keep these code + * by adding changes at end of this file. + */ +&pinctrl { + auddsm { + /omit-if-no-ref/ + auddsm_pins: auddsm-pins { + rockchip,pins = + /* auddsm_ln */ + <3 RK_PA1 4 &pcfg_pull_none>, + /* auddsm_lp */ + <3 RK_PA2 4 &pcfg_pull_none>, + /* auddsm_rn */ + <3 RK_PA3 4 &pcfg_pull_none>, + /* auddsm_rp */ + <3 RK_PA4 4 &pcfg_pull_none>; + }; + }; + + bt1120 { + /omit-if-no-ref/ + bt1120_pins: bt1120-pins { + rockchip,pins = + /* bt1120_clkout */ + <4 RK_PB0 2 &pcfg_pull_none>, + /* bt1120_d0 */ + <4 RK_PA0 2 &pcfg_pull_none>, + /* bt1120_d1 */ + <4 RK_PA1 2 &pcfg_pull_none>, + /* bt1120_d2 */ + <4 RK_PA2 2 &pcfg_pull_none>, + /* bt1120_d3 */ + <4 RK_PA3 2 &pcfg_pull_none>, + /* bt1120_d4 */ + <4 RK_PA4 2 &pcfg_pull_none>, + /* bt1120_d5 */ + <4 RK_PA5 2 &pcfg_pull_none>, + /* bt1120_d6 */ + <4 RK_PA6 2 &pcfg_pull_none>, + /* bt1120_d7 */ + <4 RK_PA7 2 &pcfg_pull_none>, + /* bt1120_d8 */ + <4 RK_PB2 2 &pcfg_pull_none>, + /* bt1120_d9 */ + <4 RK_PB3 2 &pcfg_pull_none>, + /* bt1120_d10 */ + <4 RK_PB4 2 &pcfg_pull_none>, + /* bt1120_d11 */ + <4 RK_PB5 2 &pcfg_pull_none>, + /* bt1120_d12 */ + <4 RK_PB6 2 &pcfg_pull_none>, + /* bt1120_d13 */ + <4 RK_PB7 2 &pcfg_pull_none>, + /* bt1120_d14 */ + <4 RK_PC0 2 &pcfg_pull_none>, + /* bt1120_d15 */ + <4 RK_PC1 2 &pcfg_pull_none>; + }; + }; + + can0 { + /omit-if-no-ref/ + can0m0_pins: can0m0-pins { + rockchip,pins = + /* can0_rx_m0 */ + <0 RK_PC0 11 &pcfg_pull_none>, + /* can0_tx_m0 */ + <0 RK_PB7 11 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + can0m1_pins: can0m1-pins { + rockchip,pins = + /* can0_rx_m1 */ + <4 RK_PD5 9 &pcfg_pull_none>, + /* can0_tx_m1 */ + <4 RK_PD4 9 &pcfg_pull_none>; + }; + }; + + can1 { + /omit-if-no-ref/ + can1m0_pins: can1m0-pins { + rockchip,pins = + /* can1_rx_m0 */ + <3 RK_PB5 9 &pcfg_pull_none>, + /* can1_tx_m0 */ + <3 RK_PB6 9 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + can1m1_pins: can1m1-pins { + rockchip,pins = + /* can1_rx_m1 */ + <4 RK_PB2 12 &pcfg_pull_none>, + /* can1_tx_m1 */ + <4 RK_PB3 12 &pcfg_pull_none>; + }; + }; + + can2 { + /omit-if-no-ref/ + can2m0_pins: can2m0-pins { + rockchip,pins = + /* can2_rx_m0 */ + <3 RK_PC4 9 &pcfg_pull_none>, + /* can2_tx_m0 */ + <3 RK_PC5 9 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + can2m1_pins: can2m1-pins { + rockchip,pins = + /* can2_rx_m1 */ + <0 RK_PD4 10 &pcfg_pull_none>, + /* can2_tx_m1 */ + <0 RK_PD5 10 &pcfg_pull_none>; + }; + }; + + cif { + /omit-if-no-ref/ + cif_clk: cif-clk { + rockchip,pins = + /* cif_clkout */ + <4 RK_PB4 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + cif_dvp_clk: cif-dvp-clk { + rockchip,pins = + /* cif_clkin */ + <4 RK_PB0 1 &pcfg_pull_none>, + /* cif_href */ + <4 RK_PB2 1 &pcfg_pull_none>, + /* cif_vsync */ + <4 RK_PB3 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + cif_dvp_bus16: cif-dvp-bus16 { + rockchip,pins = + /* cif_d8 */ + <3 RK_PC4 1 &pcfg_pull_none>, + /* cif_d9 */ + <3 RK_PC5 1 &pcfg_pull_none>, + /* cif_d10 */ + <3 RK_PC6 1 &pcfg_pull_none>, + /* cif_d11 */ + <3 RK_PC7 1 &pcfg_pull_none>, + /* cif_d12 */ + <3 RK_PD0 1 &pcfg_pull_none>, + /* cif_d13 */ + <3 RK_PD1 1 &pcfg_pull_none>, + /* cif_d14 */ + <3 RK_PD2 1 &pcfg_pull_none>, + /* cif_d15 */ + <3 RK_PD3 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + cif_dvp_bus8: cif-dvp-bus8 { + rockchip,pins = + /* cif_d0 */ + <4 RK_PA0 1 &pcfg_pull_none>, + /* cif_d1 */ + <4 RK_PA1 1 &pcfg_pull_none>, + /* cif_d2 */ + <4 RK_PA2 1 &pcfg_pull_none>, + /* cif_d3 */ + <4 RK_PA3 1 &pcfg_pull_none>, + /* cif_d4 */ + <4 RK_PA4 1 &pcfg_pull_none>, + /* cif_d5 */ + <4 RK_PA5 1 &pcfg_pull_none>, + /* cif_d6 */ + <4 RK_PA6 1 &pcfg_pull_none>, + /* cif_d7 */ + <4 RK_PA7 1 &pcfg_pull_none>; + }; + }; + + clk32k { + /omit-if-no-ref/ + clk32k_in: clk32k-in { + rockchip,pins = + /* clk32k_in */ + <0 RK_PB2 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + clk32k_out0: clk32k-out0 { + rockchip,pins = + /* clk32k_out0 */ + <0 RK_PB2 2 &pcfg_pull_none>; + }; + }; + + cpu { + /omit-if-no-ref/ + cpu_pins: cpu-pins { + rockchip,pins = + /* cpu_big0_avs */ + <0 RK_PD1 2 &pcfg_pull_none>, + /* cpu_big1_avs */ + <0 RK_PD5 2 &pcfg_pull_none>; + }; + }; + + ddrphych0 { + /omit-if-no-ref/ + ddrphych0_pins: ddrphych0-pins { + rockchip,pins = + /* ddrphych0_dtb0 */ + <4 RK_PA0 7 &pcfg_pull_none>, + /* ddrphych0_dtb1 */ + <4 RK_PA1 7 &pcfg_pull_none>, + /* ddrphych0_dtb2 */ + <4 RK_PA2 7 &pcfg_pull_none>, + /* ddrphych0_dtb3 */ + <4 RK_PA3 7 &pcfg_pull_none>; + }; + }; + + ddrphych1 { + /omit-if-no-ref/ + ddrphych1_pins: ddrphych1-pins { + rockchip,pins = + /* ddrphych1_dtb0 */ + <4 RK_PA4 7 &pcfg_pull_none>, + /* ddrphych1_dtb1 */ + <4 RK_PA5 7 &pcfg_pull_none>, + /* ddrphych1_dtb2 */ + <4 RK_PA6 7 &pcfg_pull_none>, + /* ddrphych1_dtb3 */ + <4 RK_PA7 7 &pcfg_pull_none>; + }; + }; + + ddrphych2 { + /omit-if-no-ref/ + ddrphych2_pins: ddrphych2-pins { + rockchip,pins = + /* ddrphych2_dtb0 */ + <4 RK_PB0 7 &pcfg_pull_none>, + /* ddrphych2_dtb1 */ + <4 RK_PB1 7 &pcfg_pull_none>, + /* ddrphych2_dtb2 */ + <4 RK_PB2 7 &pcfg_pull_none>, + /* ddrphych2_dtb3 */ + <4 RK_PB3 7 &pcfg_pull_none>; + }; + }; + + ddrphych3 { + /omit-if-no-ref/ + ddrphych3_pins: ddrphych3-pins { + rockchip,pins = + /* ddrphych3_dtb0 */ + <4 RK_PB4 7 &pcfg_pull_none>, + /* ddrphych3_dtb1 */ + <4 RK_PB5 7 &pcfg_pull_none>, + /* ddrphych3_dtb2 */ + <4 RK_PB6 7 &pcfg_pull_none>, + /* ddrphych3_dtb3 */ + <4 RK_PB7 7 &pcfg_pull_none>; + }; + }; + + dp0 { + /omit-if-no-ref/ + dp0m0_pins: dp0m0-pins { + rockchip,pins = + /* dp0_hpdin_m0 */ + <4 RK_PB4 5 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + dp0m1_pins: dp0m1-pins { + rockchip,pins = + /* dp0_hpdin_m1 */ + <0 RK_PC4 10 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + dp0m2_pins: dp0m2-pins { + rockchip,pins = + /* dp0_hpdin_m2 */ + <1 RK_PA0 5 &pcfg_pull_none>; + }; + }; + + dp1 { + /omit-if-no-ref/ + dp1m0_pins: dp1m0-pins { + rockchip,pins = + /* dp1_hpdin_m0 */ + <3 RK_PD5 5 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + dp1m1_pins: dp1m1-pins { + rockchip,pins = + /* dp1_hpdin_m1 */ + <0 RK_PC5 10 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + dp1m2_pins: dp1m2-pins { + rockchip,pins = + /* dp1_hpdin_m2 */ + <1 RK_PA1 5 &pcfg_pull_none>; + }; + }; + + emmc { + /omit-if-no-ref/ + emmc_rstnout: emmc-rstnout { + rockchip,pins = + /* emmc_rstn */ + <2 RK_PA3 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + emmc_bus8: emmc-bus8 { + rockchip,pins = + /* emmc_d0 */ + <2 RK_PD0 1 &pcfg_pull_up_drv_level_2>, + /* emmc_d1 */ + <2 RK_PD1 1 &pcfg_pull_up_drv_level_2>, + /* emmc_d2 */ + <2 RK_PD2 1 &pcfg_pull_up_drv_level_2>, + /* emmc_d3 */ + <2 RK_PD3 1 &pcfg_pull_up_drv_level_2>, + /* emmc_d4 */ + <2 RK_PD4 1 &pcfg_pull_up_drv_level_2>, + /* emmc_d5 */ + <2 RK_PD5 1 &pcfg_pull_up_drv_level_2>, + /* emmc_d6 */ + <2 RK_PD6 1 &pcfg_pull_up_drv_level_2>, + /* emmc_d7 */ + <2 RK_PD7 1 &pcfg_pull_up_drv_level_2>; + }; + + /omit-if-no-ref/ + emmc_clk: emmc-clk { + rockchip,pins = + /* emmc_clkout */ + <2 RK_PA1 1 &pcfg_pull_up_drv_level_2>; + }; + + /omit-if-no-ref/ + emmc_cmd: emmc-cmd { + rockchip,pins = + /* emmc_cmd */ + <2 RK_PA0 1 &pcfg_pull_up_drv_level_2>; + }; + + /omit-if-no-ref/ + emmc_data_strobe: emmc-data-strobe { + rockchip,pins = + /* emmc_data_strobe */ + <2 RK_PA2 1 &pcfg_pull_none>; + }; + }; + + eth1 { + /omit-if-no-ref/ + eth1_pins: eth1-pins { + rockchip,pins = + /* eth1_refclko_25m */ + <3 RK_PA6 1 &pcfg_pull_none>; + }; + }; + + fspi { + /omit-if-no-ref/ + fspim0_pins: fspim0-pins { + rockchip,pins = + /* fspi_clk_m0 */ + <2 RK_PA0 2 &pcfg_pull_up_drv_level_2>, + /* fspi_cs0n_m0 */ + <2 RK_PD6 2 &pcfg_pull_up_drv_level_2>, + /* fspi_d0_m0 */ + <2 RK_PD0 2 &pcfg_pull_up_drv_level_2>, + /* fspi_d1_m0 */ + <2 RK_PD1 2 &pcfg_pull_up_drv_level_2>, + /* fspi_d2_m0 */ + <2 RK_PD2 2 &pcfg_pull_up_drv_level_2>, + /* fspi_d3_m0 */ + <2 RK_PD3 2 &pcfg_pull_up_drv_level_2>; + }; + + /omit-if-no-ref/ + fspim0_cs1: fspim0-cs1 { + rockchip,pins = + /* fspi_cs1n_m0 */ + <2 RK_PD7 2 &pcfg_pull_up_drv_level_2>; + }; + + /omit-if-no-ref/ + fspim2_pins: fspim2-pins { + rockchip,pins = + /* fspi_clk_m2 */ + <3 RK_PA5 5 &pcfg_pull_up_drv_level_2>, + /* fspi_cs0n_m2 */ + <3 RK_PC4 2 &pcfg_pull_up_drv_level_2>, + /* fspi_d0_m2 */ + <3 RK_PA0 5 &pcfg_pull_up_drv_level_2>, + /* fspi_d1_m2 */ + <3 RK_PA1 5 &pcfg_pull_up_drv_level_2>, + /* fspi_d2_m2 */ + <3 RK_PA2 5 &pcfg_pull_up_drv_level_2>, + /* fspi_d3_m2 */ + <3 RK_PA3 5 &pcfg_pull_up_drv_level_2>; + }; + + /omit-if-no-ref/ + fspim2_cs1: fspim2-cs1 { + rockchip,pins = + /* fspi_cs1n_m2 */ + <3 RK_PC5 2 &pcfg_pull_up_drv_level_2>; + }; + }; + + gmac1 { + /omit-if-no-ref/ + gmac1_miim: gmac1-miim { + rockchip,pins = + /* gmac1_mdc */ + <3 RK_PC2 1 &pcfg_pull_none>, + /* gmac1_mdio */ + <3 RK_PC3 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + gmac1_clkinout: gmac1-clkinout { + rockchip,pins = + /* gmac1_mclkinout */ + <3 RK_PB6 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + gmac1_rx_bus2: gmac1-rx-bus2 { + rockchip,pins = + /* gmac1_rxd0 */ + <3 RK_PA7 1 &pcfg_pull_none>, + /* gmac1_rxd1 */ + <3 RK_PB0 1 &pcfg_pull_none>, + /* gmac1_rxdv_crs */ + <3 RK_PB1 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + gmac1_tx_bus2: gmac1-tx-bus2 { + rockchip,pins = + /* gmac1_txd0 */ + <3 RK_PB3 1 &pcfg_pull_none>, + /* gmac1_txd1 */ + <3 RK_PB4 1 &pcfg_pull_none>, + /* gmac1_txen */ + <3 RK_PB5 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + gmac1_rgmii_clk: gmac1-rgmii-clk { + rockchip,pins = + /* gmac1_rxclk */ + <3 RK_PA5 1 &pcfg_pull_none>, + /* gmac1_txclk */ + <3 RK_PA4 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + gmac1_rgmii_bus: gmac1-rgmii-bus { + rockchip,pins = + /* gmac1_rxd2 */ + <3 RK_PA2 1 &pcfg_pull_none>, + /* gmac1_rxd3 */ + <3 RK_PA3 1 &pcfg_pull_none>, + /* gmac1_txd2 */ + <3 RK_PA0 1 &pcfg_pull_none>, + /* gmac1_txd3 */ + <3 RK_PA1 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + gmac1_ppsclk: gmac1-ppsclk { + rockchip,pins = + /* gmac1_ppsclk */ + <3 RK_PC1 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + gmac1_ppstrig: gmac1-ppstrig { + rockchip,pins = + /* gmac1_ppstrig */ + <3 RK_PC0 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + gmac1_ptp_ref_clk: gmac1-ptp-ref-clk { + rockchip,pins = + /* gmac1_ptp_ref_clk */ + <3 RK_PB7 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + gmac1_txer: gmac1-txer { + rockchip,pins = + /* gmac1_txer */ + <3 RK_PB2 1 &pcfg_pull_none>; + }; + }; + + gpu { + /omit-if-no-ref/ + gpu_pins: gpu-pins { + rockchip,pins = + /* gpu_avs */ + <0 RK_PC5 2 &pcfg_pull_none>; + }; + }; + + hdmi { + /omit-if-no-ref/ + hdmim0_rx_cec: hdmim0-rx-cec { + rockchip,pins = + /* hdmim0_rx_cec */ + <4 RK_PB5 5 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + hdmim0_rx_hpdin: hdmim0-rx-hpdin { + rockchip,pins = + /* hdmim0_rx_hpdin */ + <4 RK_PB6 5 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + hdmim0_rx_scl: hdmim0-rx-scl { + rockchip,pins = + /* hdmim0_rx_scl */ + <0 RK_PD2 11 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + hdmim0_rx_sda: hdmim0-rx-sda { + rockchip,pins = + /* hdmim0_rx_sda */ + <0 RK_PD1 11 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + hdmim0_tx0_cec: hdmim0-tx0-cec { + rockchip,pins = + /* hdmim0_tx0_cec */ + <4 RK_PC1 5 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + hdmim0_tx0_hpd: hdmim0-tx0-hpd { + rockchip,pins = + /* hdmim0_tx0_hpd */ + <1 RK_PA5 5 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + hdmim0_tx0_scl: hdmim0-tx0-scl { + rockchip,pins = + /* hdmim0_tx0_scl */ + <4 RK_PB7 5 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + hdmim0_tx0_sda: hdmim0-tx0-sda { + rockchip,pins = + /* hdmim0_tx0_sda */ + <4 RK_PC0 5 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + hdmim0_tx1_hpd: hdmim0-tx1-hpd { + rockchip,pins = + /* hdmim0_tx1_hpd */ + <1 RK_PA6 5 &pcfg_pull_none>; + }; + /omit-if-no-ref/ + hdmim1_rx_cec: hdmim1-rx-cec { + rockchip,pins = + /* hdmim1_rx_cec */ + <3 RK_PD1 5 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + hdmim1_rx_hpdin: hdmim1-rx-hpdin { + rockchip,pins = + /* hdmim1_rx_hpdin */ + <3 RK_PD4 5 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + hdmim1_rx_scl: hdmim1-rx-scl { + rockchip,pins = + /* hdmim1_rx_scl */ + <3 RK_PD2 5 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + hdmim1_rx_sda: hdmim1-rx-sda { + rockchip,pins = + /* hdmim1_rx_sda */ + <3 RK_PD3 5 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + hdmim1_tx0_cec: hdmim1-tx0-cec { + rockchip,pins = + /* hdmim1_tx0_cec */ + <0 RK_PD1 13 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + hdmim1_tx0_hpd: hdmim1-tx0-hpd { + rockchip,pins = + /* hdmim1_tx0_hpd */ + <3 RK_PD4 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + hdmim1_tx0_scl: hdmim1-tx0-scl { + rockchip,pins = + /* hdmim1_tx0_scl */ + <0 RK_PD5 11 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + hdmim1_tx0_sda: hdmim1-tx0-sda { + rockchip,pins = + /* hdmim1_tx0_sda */ + <0 RK_PD4 11 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + hdmim1_tx1_cec: hdmim1-tx1-cec { + rockchip,pins = + /* hdmim1_tx1_cec */ + <0 RK_PD2 13 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + hdmim1_tx1_hpd: hdmim1-tx1-hpd { + rockchip,pins = + /* hdmim1_tx1_hpd */ + <3 RK_PB7 5 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + hdmim1_tx1_scl: hdmim1-tx1-scl { + rockchip,pins = + /* hdmim1_tx1_scl */ + <3 RK_PC6 5 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + hdmim1_tx1_sda: hdmim1-tx1-sda { + rockchip,pins = + /* hdmim1_tx1_sda */ + <3 RK_PC5 5 &pcfg_pull_none>; + }; + /omit-if-no-ref/ + hdmim2_rx_cec: hdmim2-rx-cec { + rockchip,pins = + /* hdmim2_rx_cec */ + <1 RK_PB7 5 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + hdmim2_rx_hpdin: hdmim2-rx-hpdin { + rockchip,pins = + /* hdmim2_rx_hpdin */ + <1 RK_PB6 5 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + hdmim2_rx_scl: hdmim2-rx-scl { + rockchip,pins = + /* hdmim2_rx_scl */ + <1 RK_PD6 5 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + hdmim2_rx_sda: hdmim2-rx-sda { + rockchip,pins = + /* hdmim2_rx_sda */ + <1 RK_PD7 5 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + hdmim2_tx0_scl: hdmim2-tx0-scl { + rockchip,pins = + /* hdmim2_tx0_scl */ + <3 RK_PC7 5 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + hdmim2_tx0_sda: hdmim2-tx0-sda { + rockchip,pins = + /* hdmim2_tx0_sda */ + <3 RK_PD0 5 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + hdmim2_tx1_cec: hdmim2-tx1-cec { + rockchip,pins = + /* hdmim2_tx1_cec */ + <3 RK_PC4 5 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + hdmim2_tx1_scl: hdmim2-tx1-scl { + rockchip,pins = + /* hdmim2_tx1_scl */ + <1 RK_PA4 5 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + hdmim2_tx1_sda: hdmim2-tx1-sda { + rockchip,pins = + /* hdmim2_tx1_sda */ + <1 RK_PA3 5 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + hdmi_debug0: hdmi-debug0 { + rockchip,pins = + /* hdmi_debug0 */ + <1 RK_PA7 7 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + hdmi_debug1: hdmi-debug1 { + rockchip,pins = + /* hdmi_debug1 */ + <1 RK_PB0 7 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + hdmi_debug2: hdmi-debug2 { + rockchip,pins = + /* hdmi_debug2 */ + <1 RK_PB1 7 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + hdmi_debug3: hdmi-debug3 { + rockchip,pins = + /* hdmi_debug3 */ + <1 RK_PB2 7 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + hdmi_debug4: hdmi-debug4 { + rockchip,pins = + /* hdmi_debug4 */ + <1 RK_PB3 7 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + hdmi_debug5: hdmi-debug5 { + rockchip,pins = + /* hdmi_debug5 */ + <1 RK_PB4 7 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + hdmi_debug6: hdmi-debug6 { + rockchip,pins = + /* hdmi_debug6 */ + <1 RK_PA0 7 &pcfg_pull_none>; + }; + }; + + i2c0 { + /omit-if-no-ref/ + i2c0m0_xfer: i2c0m0-xfer { + rockchip,pins = + /* i2c0_scl_m0 */ + <0 RK_PB3 2 &pcfg_pull_none_smt>, + /* i2c0_sda_m0 */ + <0 RK_PA6 2 &pcfg_pull_none_smt>; + }; + + /omit-if-no-ref/ + i2c0m2_xfer: i2c0m2-xfer { + rockchip,pins = + /* i2c0_scl_m2 */ + <0 RK_PD1 3 &pcfg_pull_none_smt>, + /* i2c0_sda_m2 */ + <0 RK_PD2 3 &pcfg_pull_none_smt>; + }; + }; + + i2c1 { + /omit-if-no-ref/ + i2c1m0_xfer: i2c1m0-xfer { + rockchip,pins = + /* i2c1_scl_m0 */ + <0 RK_PB5 9 &pcfg_pull_none_smt>, + /* i2c1_sda_m0 */ + <0 RK_PB6 9 &pcfg_pull_none_smt>; + }; + + /omit-if-no-ref/ + i2c1m1_xfer: i2c1m1-xfer { + rockchip,pins = + /* i2c1_scl_m1 */ + <0 RK_PB0 2 &pcfg_pull_none_smt>, + /* i2c1_sda_m1 */ + <0 RK_PB1 2 &pcfg_pull_none_smt>; + }; + + /omit-if-no-ref/ + i2c1m2_xfer: i2c1m2-xfer { + rockchip,pins = + /* i2c1_scl_m2 */ + <0 RK_PD4 9 &pcfg_pull_none_smt>, + /* i2c1_sda_m2 */ + <0 RK_PD5 9 &pcfg_pull_none_smt>; + }; + + /omit-if-no-ref/ + i2c1m3_xfer: i2c1m3-xfer { + rockchip,pins = + /* i2c1_scl_m3 */ + <2 RK_PD4 9 &pcfg_pull_none_smt>, + /* i2c1_sda_m3 */ + <2 RK_PD5 9 &pcfg_pull_none_smt>; + }; + + /omit-if-no-ref/ + i2c1m4_xfer: i2c1m4-xfer { + rockchip,pins = + /* i2c1_scl_m4 */ + <1 RK_PD2 9 &pcfg_pull_none_smt>, + /* i2c1_sda_m4 */ + <1 RK_PD3 9 &pcfg_pull_none_smt>; + }; + }; + + i2c2 { + /omit-if-no-ref/ + i2c2m0_xfer: i2c2m0-xfer { + rockchip,pins = + /* i2c2_scl_m0 */ + <0 RK_PB7 9 &pcfg_pull_none_smt>, + /* i2c2_sda_m0 */ + <0 RK_PC0 9 &pcfg_pull_none_smt>; + }; + + /omit-if-no-ref/ + i2c2m2_xfer: i2c2m2-xfer { + rockchip,pins = + /* i2c2_scl_m2 */ + <2 RK_PA3 9 &pcfg_pull_none_smt>, + /* i2c2_sda_m2 */ + <2 RK_PA2 9 &pcfg_pull_none_smt>; + }; + + /omit-if-no-ref/ + i2c2m3_xfer: i2c2m3-xfer { + rockchip,pins = + /* i2c2_scl_m3 */ + <1 RK_PC5 9 &pcfg_pull_none_smt>, + /* i2c2_sda_m3 */ + <1 RK_PC4 9 &pcfg_pull_none_smt>; + }; + + /omit-if-no-ref/ + i2c2m4_xfer: i2c2m4-xfer { + rockchip,pins = + /* i2c2_scl_m4 */ + <1 RK_PA1 9 &pcfg_pull_none_smt>, + /* i2c2_sda_m4 */ + <1 RK_PA0 9 &pcfg_pull_none_smt>; + }; + }; + + i2c3 { + /omit-if-no-ref/ + i2c3m0_xfer: i2c3m0-xfer { + rockchip,pins = + /* i2c3_scl_m0 */ + <1 RK_PC1 9 &pcfg_pull_none_smt>, + /* i2c3_sda_m0 */ + <1 RK_PC0 9 &pcfg_pull_none_smt>; + }; + + /omit-if-no-ref/ + i2c3m1_xfer: i2c3m1-xfer { + rockchip,pins = + /* i2c3_scl_m1 */ + <3 RK_PB7 9 &pcfg_pull_none_smt>, + /* i2c3_sda_m1 */ + <3 RK_PC0 9 &pcfg_pull_none_smt>; + }; + + /omit-if-no-ref/ + i2c3m2_xfer: i2c3m2-xfer { + rockchip,pins = + /* i2c3_scl_m2 */ + <4 RK_PA4 9 &pcfg_pull_none_smt>, + /* i2c3_sda_m2 */ + <4 RK_PA5 9 &pcfg_pull_none_smt>; + }; + + /omit-if-no-ref/ + i2c3m4_xfer: i2c3m4-xfer { + rockchip,pins = + /* i2c3_scl_m4 */ + <4 RK_PD0 9 &pcfg_pull_none_smt>, + /* i2c3_sda_m4 */ + <4 RK_PD1 9 &pcfg_pull_none_smt>; + }; + }; + + i2c4 { + /omit-if-no-ref/ + i2c4m0_xfer: i2c4m0-xfer { + rockchip,pins = + /* i2c4_scl_m0 */ + <3 RK_PA6 9 &pcfg_pull_none_smt>, + /* i2c4_sda_m0 */ + <3 RK_PA5 9 &pcfg_pull_none_smt>; + }; + + /omit-if-no-ref/ + i2c4m2_xfer: i2c4m2-xfer { + rockchip,pins = + /* i2c4_scl_m2 */ + <0 RK_PC5 9 &pcfg_pull_none_smt>, + /* i2c4_sda_m2 */ + <0 RK_PC4 9 &pcfg_pull_none_smt>; + }; + + /omit-if-no-ref/ + i2c4m3_xfer: i2c4m3-xfer { + rockchip,pins = + /* i2c4_scl_m3 */ + <1 RK_PA3 9 &pcfg_pull_none_smt>, + /* i2c4_sda_m3 */ + <1 RK_PA2 9 &pcfg_pull_none_smt>; + }; + + /omit-if-no-ref/ + i2c4m4_xfer: i2c4m4-xfer { + rockchip,pins = + /* i2c4_scl_m4 */ + <1 RK_PC7 9 &pcfg_pull_none_smt>, + /* i2c4_sda_m4 */ + <1 RK_PC6 9 &pcfg_pull_none_smt>; + }; + }; + + i2c5 { + /omit-if-no-ref/ + i2c5m0_xfer: i2c5m0-xfer { + rockchip,pins = + /* i2c5_scl_m0 */ + <3 RK_PC7 9 &pcfg_pull_none_smt>, + /* i2c5_sda_m0 */ + <3 RK_PD0 9 &pcfg_pull_none_smt>; + }; + + /omit-if-no-ref/ + i2c5m1_xfer: i2c5m1-xfer { + rockchip,pins = + /* i2c5_scl_m1 */ + <4 RK_PB6 9 &pcfg_pull_none_smt>, + /* i2c5_sda_m1 */ + <4 RK_PB7 9 &pcfg_pull_none_smt>; + }; + + /omit-if-no-ref/ + i2c5m2_xfer: i2c5m2-xfer { + rockchip,pins = + /* i2c5_scl_m2 */ + <4 RK_PA6 9 &pcfg_pull_none_smt>, + /* i2c5_sda_m2 */ + <4 RK_PA7 9 &pcfg_pull_none_smt>; + }; + + /omit-if-no-ref/ + i2c5m3_xfer: i2c5m3-xfer { + rockchip,pins = + /* i2c5_scl_m3 */ + <1 RK_PB6 9 &pcfg_pull_none_smt>, + /* i2c5_sda_m3 */ + <1 RK_PB7 9 &pcfg_pull_none_smt>; + }; + }; + + i2c6 { + /omit-if-no-ref/ + i2c6m0_xfer: i2c6m0-xfer { + rockchip,pins = + /* i2c6_scl_m0 */ + <0 RK_PD0 9 &pcfg_pull_none_smt>, + /* i2c6_sda_m0 */ + <0 RK_PC7 9 &pcfg_pull_none_smt>; + }; + + /omit-if-no-ref/ + i2c6m1_xfer: i2c6m1-xfer { + rockchip,pins = + /* i2c6_scl_m1 */ + <1 RK_PC3 9 &pcfg_pull_none_smt>, + /* i2c6_sda_m1 */ + <1 RK_PC2 9 &pcfg_pull_none_smt>; + }; + + /omit-if-no-ref/ + i2c6m3_xfer: i2c6m3-xfer { + rockchip,pins = + /* i2c6_scl_m3 */ + <4 RK_PB1 9 &pcfg_pull_none_smt>, + /* i2c6_sda_m3 */ + <4 RK_PB0 9 &pcfg_pull_none_smt>; + }; + + /omit-if-no-ref/ + i2c6m4_xfer: i2c6m4-xfer { + rockchip,pins = + /* i2c6_scl_m4 */ + <3 RK_PA1 9 &pcfg_pull_none_smt>, + /* i2c6_sda_m4 */ + <3 RK_PA0 9 &pcfg_pull_none_smt>; + }; + }; + + i2c7 { + /omit-if-no-ref/ + i2c7m0_xfer: i2c7m0-xfer { + rockchip,pins = + /* i2c7_scl_m0 */ + <1 RK_PD0 9 &pcfg_pull_none_smt>, + /* i2c7_sda_m0 */ + <1 RK_PD1 9 &pcfg_pull_none_smt>; + }; + + /omit-if-no-ref/ + i2c7m2_xfer: i2c7m2-xfer { + rockchip,pins = + /* i2c7_scl_m2 */ + <3 RK_PD2 9 &pcfg_pull_none_smt>, + /* i2c7_sda_m2 */ + <3 RK_PD3 9 &pcfg_pull_none_smt>; + }; + + /omit-if-no-ref/ + i2c7m3_xfer: i2c7m3-xfer { + rockchip,pins = + /* i2c7_scl_m3 */ + <4 RK_PB2 9 &pcfg_pull_none_smt>, + /* i2c7_sda_m3 */ + <4 RK_PB3 9 &pcfg_pull_none_smt>; + }; + }; + + i2c8 { + /omit-if-no-ref/ + i2c8m0_xfer: i2c8m0-xfer { + rockchip,pins = + /* i2c8_scl_m0 */ + <4 RK_PD2 9 &pcfg_pull_none_smt>, + /* i2c8_sda_m0 */ + <4 RK_PD3 9 &pcfg_pull_none_smt>; + }; + + /omit-if-no-ref/ + i2c8m2_xfer: i2c8m2-xfer { + rockchip,pins = + /* i2c8_scl_m2 */ + <1 RK_PD6 9 &pcfg_pull_none_smt>, + /* i2c8_sda_m2 */ + <1 RK_PD7 9 &pcfg_pull_none_smt>; + }; + + /omit-if-no-ref/ + i2c8m3_xfer: i2c8m3-xfer { + rockchip,pins = + /* i2c8_scl_m3 */ + <4 RK_PC0 9 &pcfg_pull_none_smt>, + /* i2c8_sda_m3 */ + <4 RK_PC1 9 &pcfg_pull_none_smt>; + }; + + /omit-if-no-ref/ + i2c8m4_xfer: i2c8m4-xfer { + rockchip,pins = + /* i2c8_scl_m4 */ + <3 RK_PC2 9 &pcfg_pull_none_smt>, + /* i2c8_sda_m4 */ + <3 RK_PC3 9 &pcfg_pull_none_smt>; + }; + }; + + i2s0 { + /omit-if-no-ref/ + i2s0_lrck: i2s0-lrck { + rockchip,pins = + /* i2s0_lrck */ + <1 RK_PC5 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s0_mclk: i2s0-mclk { + rockchip,pins = + /* i2s0_mclk */ + <1 RK_PC2 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s0_sclk: i2s0-sclk { + rockchip,pins = + /* i2s0_sclk */ + <1 RK_PC3 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s0_sdi0: i2s0-sdi0 { + rockchip,pins = + /* i2s0_sdi0 */ + <1 RK_PD4 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s0_sdi1: i2s0-sdi1 { + rockchip,pins = + /* i2s0_sdi1 */ + <1 RK_PD3 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s0_sdi2: i2s0-sdi2 { + rockchip,pins = + /* i2s0_sdi2 */ + <1 RK_PD2 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s0_sdi3: i2s0-sdi3 { + rockchip,pins = + /* i2s0_sdi3 */ + <1 RK_PD1 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s0_sdo0: i2s0-sdo0 { + rockchip,pins = + /* i2s0_sdo0 */ + <1 RK_PC7 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s0_sdo1: i2s0-sdo1 { + rockchip,pins = + /* i2s0_sdo1 */ + <1 RK_PD0 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s0_sdo2: i2s0-sdo2 { + rockchip,pins = + /* i2s0_sdo2 */ + <1 RK_PD1 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s0_sdo3: i2s0-sdo3 { + rockchip,pins = + /* i2s0_sdo3 */ + <1 RK_PD2 1 &pcfg_pull_none>; + }; + }; + + i2s1 { + /omit-if-no-ref/ + i2s1m0_lrck: i2s1m0-lrck { + rockchip,pins = + /* i2s1m0_lrck */ + <4 RK_PA2 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s1m0_mclk: i2s1m0-mclk { + rockchip,pins = + /* i2s1m0_mclk */ + <4 RK_PA0 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s1m0_sclk: i2s1m0-sclk { + rockchip,pins = + /* i2s1m0_sclk */ + <4 RK_PA1 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s1m0_sdi0: i2s1m0-sdi0 { + rockchip,pins = + /* i2s1m0_sdi0 */ + <4 RK_PA5 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s1m0_sdi1: i2s1m0-sdi1 { + rockchip,pins = + /* i2s1m0_sdi1 */ + <4 RK_PA6 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s1m0_sdi2: i2s1m0-sdi2 { + rockchip,pins = + /* i2s1m0_sdi2 */ + <4 RK_PA7 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s1m0_sdi3: i2s1m0-sdi3 { + rockchip,pins = + /* i2s1m0_sdi3 */ + <4 RK_PB0 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s1m0_sdo0: i2s1m0-sdo0 { + rockchip,pins = + /* i2s1m0_sdo0 */ + <4 RK_PB1 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s1m0_sdo1: i2s1m0-sdo1 { + rockchip,pins = + /* i2s1m0_sdo1 */ + <4 RK_PB2 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s1m0_sdo2: i2s1m0-sdo2 { + rockchip,pins = + /* i2s1m0_sdo2 */ + <4 RK_PB3 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s1m0_sdo3: i2s1m0-sdo3 { + rockchip,pins = + /* i2s1m0_sdo3 */ + <4 RK_PB4 3 &pcfg_pull_none>; + }; + /omit-if-no-ref/ + i2s1m1_lrck: i2s1m1-lrck { + rockchip,pins = + /* i2s1m1_lrck */ + <0 RK_PB7 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s1m1_mclk: i2s1m1-mclk { + rockchip,pins = + /* i2s1m1_mclk */ + <0 RK_PB5 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s1m1_sclk: i2s1m1-sclk { + rockchip,pins = + /* i2s1m1_sclk */ + <0 RK_PB6 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s1m1_sdi0: i2s1m1-sdi0 { + rockchip,pins = + /* i2s1m1_sdi0 */ + <0 RK_PC5 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s1m1_sdi1: i2s1m1-sdi1 { + rockchip,pins = + /* i2s1m1_sdi1 */ + <0 RK_PC6 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s1m1_sdi2: i2s1m1-sdi2 { + rockchip,pins = + /* i2s1m1_sdi2 */ + <0 RK_PC7 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s1m1_sdi3: i2s1m1-sdi3 { + rockchip,pins = + /* i2s1m1_sdi3 */ + <0 RK_PD0 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s1m1_sdo0: i2s1m1-sdo0 { + rockchip,pins = + /* i2s1m1_sdo0 */ + <0 RK_PD1 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s1m1_sdo1: i2s1m1-sdo1 { + rockchip,pins = + /* i2s1m1_sdo1 */ + <0 RK_PD2 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s1m1_sdo2: i2s1m1-sdo2 { + rockchip,pins = + /* i2s1m1_sdo2 */ + <0 RK_PD4 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s1m1_sdo3: i2s1m1-sdo3 { + rockchip,pins = + /* i2s1m1_sdo3 */ + <0 RK_PD5 1 &pcfg_pull_none>; + }; + }; + + i2s2 { + /omit-if-no-ref/ + i2s2m1_lrck: i2s2m1-lrck { + rockchip,pins = + /* i2s2m1_lrck */ + <3 RK_PB6 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s2m1_mclk: i2s2m1-mclk { + rockchip,pins = + /* i2s2m1_mclk */ + <3 RK_PB4 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s2m1_sclk: i2s2m1-sclk { + rockchip,pins = + /* i2s2m1_sclk */ + <3 RK_PB5 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s2m1_sdi: i2s2m1-sdi { + rockchip,pins = + /* i2s2m1_sdi */ + <3 RK_PB2 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s2m1_sdo: i2s2m1-sdo { + rockchip,pins = + /* i2s2m1_sdo */ + <3 RK_PB3 3 &pcfg_pull_none>; + }; + }; + + i2s3 { + /omit-if-no-ref/ + i2s3_lrck: i2s3-lrck { + rockchip,pins = + /* i2s3_lrck */ + <3 RK_PA2 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s3_mclk: i2s3-mclk { + rockchip,pins = + /* i2s3_mclk */ + <3 RK_PA0 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s3_sclk: i2s3-sclk { + rockchip,pins = + /* i2s3_sclk */ + <3 RK_PA1 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s3_sdi: i2s3-sdi { + rockchip,pins = + /* i2s3_sdi */ + <3 RK_PA4 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s3_sdo: i2s3-sdo { + rockchip,pins = + /* i2s3_sdo */ + <3 RK_PA3 3 &pcfg_pull_none>; + }; + }; + + jtag { + /omit-if-no-ref/ + jtagm0_pins: jtagm0-pins { + rockchip,pins = + /* jtag_tck_m0 */ + <4 RK_PD2 5 &pcfg_pull_none>, + /* jtag_tms_m0 */ + <4 RK_PD3 5 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + jtagm1_pins: jtagm1-pins { + rockchip,pins = + /* jtag_tck_m1 */ + <4 RK_PD0 5 &pcfg_pull_none>, + /* jtag_tms_m1 */ + <4 RK_PD1 5 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + jtagm2_pins: jtagm2-pins { + rockchip,pins = + /* jtag_tck_m2 */ + <0 RK_PB5 2 &pcfg_pull_none>, + /* jtag_tms_m2 */ + <0 RK_PB6 2 &pcfg_pull_none>; + }; + }; + + litcpu { + /omit-if-no-ref/ + litcpu_pins: litcpu-pins { + rockchip,pins = + /* litcpu_avs */ + <0 RK_PD3 1 &pcfg_pull_none>; + }; + }; + + mcu { + /omit-if-no-ref/ + mcum0_pins: mcum0-pins { + rockchip,pins = + /* mcu_jtag_tck_m0 */ + <4 RK_PD4 5 &pcfg_pull_none>, + /* mcu_jtag_tms_m0 */ + <4 RK_PD5 5 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + mcum1_pins: mcum1-pins { + rockchip,pins = + /* mcu_jtag_tck_m1 */ + <3 RK_PD4 6 &pcfg_pull_none>, + /* mcu_jtag_tms_m1 */ + <3 RK_PD5 6 &pcfg_pull_none>; + }; + }; + + mipi { + /omit-if-no-ref/ + mipim0_camera0_clk: mipim0-camera0-clk { + rockchip,pins = + /* mipim0_camera0_clk */ + <4 RK_PB1 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + mipim0_camera1_clk: mipim0-camera1-clk { + rockchip,pins = + /* mipim0_camera1_clk */ + <1 RK_PB6 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + mipim0_camera2_clk: mipim0-camera2-clk { + rockchip,pins = + /* mipim0_camera2_clk */ + <1 RK_PB7 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + mipim0_camera3_clk: mipim0-camera3-clk { + rockchip,pins = + /* mipim0_camera3_clk */ + <1 RK_PD6 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + mipim0_camera4_clk: mipim0-camera4-clk { + rockchip,pins = + /* mipim0_camera4_clk */ + <1 RK_PD7 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + mipim1_camera0_clk: mipim1-camera0-clk { + rockchip,pins = + /* mipim1_camera0_clk */ + <3 RK_PA5 4 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + mipim1_camera1_clk: mipim1-camera1-clk { + rockchip,pins = + /* mipim1_camera1_clk */ + <3 RK_PA6 4 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + mipim1_camera2_clk: mipim1-camera2-clk { + rockchip,pins = + /* mipim1_camera2_clk */ + <3 RK_PA7 4 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + mipim1_camera3_clk: mipim1-camera3-clk { + rockchip,pins = + /* mipim1_camera3_clk */ + <3 RK_PB0 4 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + mipim1_camera4_clk: mipim1-camera4-clk { + rockchip,pins = + /* mipim1_camera4_clk */ + <3 RK_PB1 4 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + mipi_te0: mipi-te0 { + rockchip,pins = + /* mipi_te0 */ + <3 RK_PC2 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + mipi_te1: mipi-te1 { + rockchip,pins = + /* mipi_te1 */ + <3 RK_PC3 2 &pcfg_pull_none>; + }; + }; + + npu { + /omit-if-no-ref/ + npu_pins: npu-pins { + rockchip,pins = + /* npu_avs */ + <0 RK_PC6 2 &pcfg_pull_none>; + }; + }; + + pcie20x1 { + /omit-if-no-ref/ + pcie20x1m0_pins: pcie20x1m0-pins { + rockchip,pins = + /* pcie20x1_2_clkreqn_m0 */ + <3 RK_PC7 4 &pcfg_pull_none>, + /* pcie20x1_2_perstn_m0 */ + <3 RK_PD1 4 &pcfg_pull_none>, + /* pcie20x1_2_waken_m0 */ + <3 RK_PD0 4 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pcie20x1m1_pins: pcie20x1m1-pins { + rockchip,pins = + /* pcie20x1_2_clkreqn_m1 */ + <4 RK_PB7 4 &pcfg_pull_none>, + /* pcie20x1_2_perstn_m1 */ + <4 RK_PC1 4 &pcfg_pull_none>, + /* pcie20x1_2_waken_m1 */ + <4 RK_PC0 4 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pcie20x1_2_button_rstn: pcie20x1-2-button-rstn { + rockchip,pins = + /* pcie20x1_2_button_rstn */ + <4 RK_PB3 4 &pcfg_pull_none>; + }; + }; + + pcie30phy { + /omit-if-no-ref/ + pcie30phy_pins: pcie30phy-pins { + rockchip,pins = + /* pcie30phy_dtb0 */ + <1 RK_PC4 4 &pcfg_pull_none>, + /* pcie30phy_dtb1 */ + <1 RK_PD1 4 &pcfg_pull_none>; + }; + }; + + pcie30x1 { + /omit-if-no-ref/ + pcie30x1m0_pins: pcie30x1m0-pins { + rockchip,pins = + /* pcie30x1_0_clkreqn_m0 */ + <0 RK_PC0 12 &pcfg_pull_none>, + /* pcie30x1_0_perstn_m0 */ + <0 RK_PC5 12 &pcfg_pull_none>, + /* pcie30x1_0_waken_m0 */ + <0 RK_PC4 12 &pcfg_pull_none>, + /* pcie30x1_1_clkreqn_m0 */ + <0 RK_PB5 12 &pcfg_pull_none>, + /* pcie30x1_1_perstn_m0 */ + <0 RK_PB7 12 &pcfg_pull_none>, + /* pcie30x1_1_waken_m0 */ + <0 RK_PB6 12 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pcie30x1m1_pins: pcie30x1m1-pins { + rockchip,pins = + /* pcie30x1_0_clkreqn_m1 */ + <4 RK_PA3 4 &pcfg_pull_none>, + /* pcie30x1_0_perstn_m1 */ + <4 RK_PA5 4 &pcfg_pull_none>, + /* pcie30x1_0_waken_m1 */ + <4 RK_PA4 4 &pcfg_pull_none>, + /* pcie30x1_1_clkreqn_m1 */ + <4 RK_PA0 4 &pcfg_pull_none>, + /* pcie30x1_1_perstn_m1 */ + <4 RK_PA2 4 &pcfg_pull_none>, + /* pcie30x1_1_waken_m1 */ + <4 RK_PA1 4 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pcie30x1m2_pins: pcie30x1m2-pins { + rockchip,pins = + /* pcie30x1_0_clkreqn_m2 */ + <1 RK_PB5 4 &pcfg_pull_none>, + /* pcie30x1_0_perstn_m2 */ + <1 RK_PB4 4 &pcfg_pull_none>, + /* pcie30x1_0_waken_m2 */ + <1 RK_PB3 4 &pcfg_pull_none>, + /* pcie30x1_1_clkreqn_m2 */ + <1 RK_PA0 4 &pcfg_pull_none>, + /* pcie30x1_1_perstn_m2 */ + <1 RK_PA7 4 &pcfg_pull_none>, + /* pcie30x1_1_waken_m2 */ + <1 RK_PA1 4 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pcie30x1_0_button_rstn: pcie30x1-0-button-rstn { + rockchip,pins = + /* pcie30x1_0_button_rstn */ + <4 RK_PB1 4 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pcie30x1_1_button_rstn: pcie30x1-1-button-rstn { + rockchip,pins = + /* pcie30x1_1_button_rstn */ + <4 RK_PB2 4 &pcfg_pull_none>; + }; + }; + + pcie30x2 { + /omit-if-no-ref/ + pcie30x2m0_pins: pcie30x2m0-pins { + rockchip,pins = + /* pcie30x2_clkreqn_m0 */ + <0 RK_PD1 12 &pcfg_pull_none>, + /* pcie30x2_perstn_m0 */ + <0 RK_PD4 12 &pcfg_pull_none>, + /* pcie30x2_waken_m0 */ + <0 RK_PD2 12 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pcie30x2m1_pins: pcie30x2m1-pins { + rockchip,pins = + /* pcie30x2_clkreqn_m1 */ + <4 RK_PA6 4 &pcfg_pull_none>, + /* pcie30x2_perstn_m1 */ + <4 RK_PB0 4 &pcfg_pull_none>, + /* pcie30x2_waken_m1 */ + <4 RK_PA7 4 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pcie30x2m2_pins: pcie30x2m2-pins { + rockchip,pins = + /* pcie30x2_clkreqn_m2 */ + <3 RK_PD2 4 &pcfg_pull_none>, + /* pcie30x2_perstn_m2 */ + <3 RK_PD4 4 &pcfg_pull_none>, + /* pcie30x2_waken_m2 */ + <3 RK_PD3 4 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pcie30x2m3_pins: pcie30x2m3-pins { + rockchip,pins = + /* pcie30x2_clkreqn_m3 */ + <1 RK_PD7 4 &pcfg_pull_none>, + /* pcie30x2_perstn_m3 */ + <1 RK_PB7 4 &pcfg_pull_none>, + /* pcie30x2_waken_m3 */ + <1 RK_PB6 4 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pcie30x2_button_rstn: pcie30x2-button-rstn { + rockchip,pins = + /* pcie30x2_button_rstn */ + <3 RK_PC1 4 &pcfg_pull_none>; + }; + }; + + pcie30x4 { + /omit-if-no-ref/ + pcie30x4m0_pins: pcie30x4m0-pins { + rockchip,pins = + /* pcie30x4_clkreqn_m0 */ + <0 RK_PC6 12 &pcfg_pull_none>, + /* pcie30x4_perstn_m0 */ + <0 RK_PD0 12 &pcfg_pull_none>, + /* pcie30x4_waken_m0 */ + <0 RK_PC7 12 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pcie30x4m1_pins: pcie30x4m1-pins { + rockchip,pins = + /* pcie30x4_clkreqn_m1 */ + <4 RK_PB4 4 &pcfg_pull_none>, + /* pcie30x4_perstn_m1 */ + <4 RK_PB6 4 &pcfg_pull_none>, + /* pcie30x4_waken_m1 */ + <4 RK_PB5 4 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pcie30x4m2_pins: pcie30x4m2-pins { + rockchip,pins = + /* pcie30x4_clkreqn_m2 */ + <3 RK_PC4 4 &pcfg_pull_none>, + /* pcie30x4_perstn_m2 */ + <3 RK_PC6 4 &pcfg_pull_none>, + /* pcie30x4_waken_m2 */ + <3 RK_PC5 4 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pcie30x4m3_pins: pcie30x4m3-pins { + rockchip,pins = + /* pcie30x4_clkreqn_m3 */ + <1 RK_PB0 4 &pcfg_pull_none>, + /* pcie30x4_perstn_m3 */ + <1 RK_PB2 4 &pcfg_pull_none>, + /* pcie30x4_waken_m3 */ + <1 RK_PB1 4 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pcie30x4_button_rstn: pcie30x4-button-rstn { + rockchip,pins = + /* pcie30x4_button_rstn */ + <3 RK_PD5 4 &pcfg_pull_none>; + }; + }; + + pdm0 { + /omit-if-no-ref/ + pdm0m0_clk: pdm0m0-clk { + rockchip,pins = + /* pdm0_clk0_m0 */ + <1 RK_PC6 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pdm0m0_clk1: pdm0m0-clk1 { + rockchip,pins = + /* pdm0m0_clk1 */ + <1 RK_PC4 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pdm0m0_sdi0: pdm0m0-sdi0 { + rockchip,pins = + /* pdm0m0_sdi0 */ + <1 RK_PD5 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pdm0m0_sdi1: pdm0m0-sdi1 { + rockchip,pins = + /* pdm0m0_sdi1 */ + <1 RK_PD1 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pdm0m0_sdi2: pdm0m0-sdi2 { + rockchip,pins = + /* pdm0m0_sdi2 */ + <1 RK_PD2 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pdm0m0_sdi3: pdm0m0-sdi3 { + rockchip,pins = + /* pdm0m0_sdi3 */ + <1 RK_PD3 3 &pcfg_pull_none>; + }; + /omit-if-no-ref/ + pdm0m1_clk: pdm0m1-clk { + rockchip,pins = + /* pdm0_clk0_m1 */ + <0 RK_PC0 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pdm0m1_clk1: pdm0m1-clk1 { + rockchip,pins = + /* pdm0m1_clk1 */ + <0 RK_PC4 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pdm0m1_sdi0: pdm0m1-sdi0 { + rockchip,pins = + /* pdm0m1_sdi0 */ + <0 RK_PC7 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pdm0m1_sdi1: pdm0m1-sdi1 { + rockchip,pins = + /* pdm0m1_sdi1 */ + <0 RK_PD0 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pdm0m1_sdi2: pdm0m1-sdi2 { + rockchip,pins = + /* pdm0m1_sdi2 */ + <0 RK_PD4 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pdm0m1_sdi3: pdm0m1-sdi3 { + rockchip,pins = + /* pdm0m1_sdi3 */ + <0 RK_PD6 2 &pcfg_pull_none>; + }; + }; + + pdm1 { + /omit-if-no-ref/ + pdm1m0_clk: pdm1m0-clk { + rockchip,pins = + /* pdm1_clk0_m0 */ + <4 RK_PD5 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pdm1m0_clk1: pdm1m0-clk1 { + rockchip,pins = + /* pdm1m0_clk1 */ + <4 RK_PD4 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pdm1m0_sdi0: pdm1m0-sdi0 { + rockchip,pins = + /* pdm1m0_sdi0 */ + <4 RK_PD3 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pdm1m0_sdi1: pdm1m0-sdi1 { + rockchip,pins = + /* pdm1m0_sdi1 */ + <4 RK_PD2 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pdm1m0_sdi2: pdm1m0-sdi2 { + rockchip,pins = + /* pdm1m0_sdi2 */ + <4 RK_PD1 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pdm1m0_sdi3: pdm1m0-sdi3 { + rockchip,pins = + /* pdm1m0_sdi3 */ + <4 RK_PD0 2 &pcfg_pull_none>; + }; + /omit-if-no-ref/ + pdm1m1_clk: pdm1m1-clk { + rockchip,pins = + /* pdm1_clk0_m1 */ + <1 RK_PB4 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pdm1m1_clk1: pdm1m1-clk1 { + rockchip,pins = + /* pdm1m1_clk1 */ + <1 RK_PB3 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pdm1m1_sdi0: pdm1m1-sdi0 { + rockchip,pins = + /* pdm1m1_sdi0 */ + <1 RK_PA7 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pdm1m1_sdi1: pdm1m1-sdi1 { + rockchip,pins = + /* pdm1m1_sdi1 */ + <1 RK_PB0 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pdm1m1_sdi2: pdm1m1-sdi2 { + rockchip,pins = + /* pdm1m1_sdi2 */ + <1 RK_PB1 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pdm1m1_sdi3: pdm1m1-sdi3 { + rockchip,pins = + /* pdm1m1_sdi3 */ + <1 RK_PB2 2 &pcfg_pull_none>; + }; + }; + + pmic { + /omit-if-no-ref/ + pmic_pins: pmic-pins { + rockchip,pins = + /* pmic_int_l */ + <0 RK_PA7 0 &pcfg_pull_up>, + /* pmic_sleep1 */ + <0 RK_PA2 1 &pcfg_pull_none>, + /* pmic_sleep2 */ + <0 RK_PA3 1 &pcfg_pull_none>, + /* pmic_sleep3 */ + <0 RK_PC1 1 &pcfg_pull_none>, + /* pmic_sleep4 */ + <0 RK_PC2 1 &pcfg_pull_none>, + /* pmic_sleep5 */ + <0 RK_PC3 1 &pcfg_pull_none>, + /* pmic_sleep6 */ + <0 RK_PD6 1 &pcfg_pull_none>; + }; + }; + + pmu { + /omit-if-no-ref/ + pmu_pins: pmu-pins { + rockchip,pins = + /* pmu_debug */ + <0 RK_PA5 3 &pcfg_pull_none>; + }; + }; + + pwm0 { + /omit-if-no-ref/ + pwm0m0_pins: pwm0m0-pins { + rockchip,pins = + /* pwm0_m0 */ + <0 RK_PB7 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pwm0m1_pins: pwm0m1-pins { + rockchip,pins = + /* pwm0_m1 */ + <1 RK_PD2 11 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pwm0m2_pins: pwm0m2-pins { + rockchip,pins = + /* pwm0_m2 */ + <1 RK_PA2 11 &pcfg_pull_none>; + }; + }; + + pwm1 { + /omit-if-no-ref/ + pwm1m0_pins: pwm1m0-pins { + rockchip,pins = + /* pwm1_m0 */ + <0 RK_PC0 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pwm1m1_pins: pwm1m1-pins { + rockchip,pins = + /* pwm1_m1 */ + <1 RK_PD3 11 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pwm1m2_pins: pwm1m2-pins { + rockchip,pins = + /* pwm1_m2 */ + <1 RK_PA3 11 &pcfg_pull_none>; + }; + }; + + pwm2 { + /omit-if-no-ref/ + pwm2m0_pins: pwm2m0-pins { + rockchip,pins = + /* pwm2_m0 */ + <0 RK_PC4 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pwm2m1_pins: pwm2m1-pins { + rockchip,pins = + /* pwm2_m1 */ + <3 RK_PB1 11 &pcfg_pull_none>; + }; + }; + + pwm3 { + /omit-if-no-ref/ + pwm3m0_pins: pwm3m0-pins { + rockchip,pins = + /* pwm3_ir_m0 */ + <0 RK_PD4 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pwm3m1_pins: pwm3m1-pins { + rockchip,pins = + /* pwm3_ir_m1 */ + <3 RK_PB2 11 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pwm3m2_pins: pwm3m2-pins { + rockchip,pins = + /* pwm3_ir_m2 */ + <1 RK_PC2 11 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pwm3m3_pins: pwm3m3-pins { + rockchip,pins = + /* pwm3_ir_m3 */ + <1 RK_PA7 11 &pcfg_pull_none>; + }; + }; + + pwm4 { + /omit-if-no-ref/ + pwm4m0_pins: pwm4m0-pins { + rockchip,pins = + /* pwm4_m0 */ + <0 RK_PC5 11 &pcfg_pull_none>; + }; + }; + + pwm5 { + /omit-if-no-ref/ + pwm5m0_pins: pwm5m0-pins { + rockchip,pins = + /* pwm5_m0 */ + <0 RK_PB1 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pwm5m1_pins: pwm5m1-pins { + rockchip,pins = + /* pwm5_m1 */ + <0 RK_PC6 11 &pcfg_pull_none>; + }; + }; + + pwm6 { + /omit-if-no-ref/ + pwm6m0_pins: pwm6m0-pins { + rockchip,pins = + /* pwm6_m0 */ + <0 RK_PC7 11 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pwm6m1_pins: pwm6m1-pins { + rockchip,pins = + /* pwm6_m1 */ + <4 RK_PC1 11 &pcfg_pull_none>; + }; + }; + + pwm7 { + /omit-if-no-ref/ + pwm7m0_pins: pwm7m0-pins { + rockchip,pins = + /* pwm7_ir_m0 */ + <0 RK_PD0 11 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pwm7m1_pins: pwm7m1-pins { + rockchip,pins = + /* pwm7_ir_m1 */ + <4 RK_PD4 11 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pwm7m2_pins: pwm7m2-pins { + rockchip,pins = + /* pwm7_ir_m2 */ + <1 RK_PC3 11 &pcfg_pull_none>; + }; + }; + + pwm8 { + /omit-if-no-ref/ + pwm8m0_pins: pwm8m0-pins { + rockchip,pins = + /* pwm8_m0 */ + <3 RK_PA7 11 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pwm8m1_pins: pwm8m1-pins { + rockchip,pins = + /* pwm8_m1 */ + <4 RK_PD0 11 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pwm8m2_pins: pwm8m2-pins { + rockchip,pins = + /* pwm8_m2 */ + <3 RK_PD0 11 &pcfg_pull_none>; + }; + }; + + pwm9 { + /omit-if-no-ref/ + pwm9m0_pins: pwm9m0-pins { + rockchip,pins = + /* pwm9_m0 */ + <3 RK_PB0 11 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pwm9m1_pins: pwm9m1-pins { + rockchip,pins = + /* pwm9_m1 */ + <4 RK_PD1 11 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pwm9m2_pins: pwm9m2-pins { + rockchip,pins = + /* pwm9_m2 */ + <3 RK_PD1 11 &pcfg_pull_none>; + }; + }; + + pwm10 { + /omit-if-no-ref/ + pwm10m0_pins: pwm10m0-pins { + rockchip,pins = + /* pwm10_m0 */ + <3 RK_PA0 11 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pwm10m1_pins: pwm10m1-pins { + rockchip,pins = + /* pwm10_m1 */ + <4 RK_PD3 11 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pwm10m2_pins: pwm10m2-pins { + rockchip,pins = + /* pwm10_m2 */ + <3 RK_PD3 11 &pcfg_pull_none>; + }; + }; + + pwm11 { + /omit-if-no-ref/ + pwm11m0_pins: pwm11m0-pins { + rockchip,pins = + /* pwm11_ir_m0 */ + <3 RK_PA1 11 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pwm11m1_pins: pwm11m1-pins { + rockchip,pins = + /* pwm11_ir_m1 */ + <4 RK_PB4 11 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pwm11m2_pins: pwm11m2-pins { + rockchip,pins = + /* pwm11_ir_m2 */ + <1 RK_PC4 11 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pwm11m3_pins: pwm11m3-pins { + rockchip,pins = + /* pwm11_ir_m3 */ + <3 RK_PD5 11 &pcfg_pull_none>; + }; + }; + + pwm12 { + /omit-if-no-ref/ + pwm12m0_pins: pwm12m0-pins { + rockchip,pins = + /* pwm12_m0 */ + <3 RK_PB5 11 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pwm12m1_pins: pwm12m1-pins { + rockchip,pins = + /* pwm12_m1 */ + <4 RK_PB5 11 &pcfg_pull_none>; + }; + }; + + pwm13 { + /omit-if-no-ref/ + pwm13m0_pins: pwm13m0-pins { + rockchip,pins = + /* pwm13_m0 */ + <3 RK_PB6 11 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pwm13m1_pins: pwm13m1-pins { + rockchip,pins = + /* pwm13_m1 */ + <4 RK_PB6 11 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pwm13m2_pins: pwm13m2-pins { + rockchip,pins = + /* pwm13_m2 */ + <1 RK_PB7 11 &pcfg_pull_none>; + }; + }; + + pwm14 { + /omit-if-no-ref/ + pwm14m0_pins: pwm14m0-pins { + rockchip,pins = + /* pwm14_m0 */ + <3 RK_PC2 11 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pwm14m1_pins: pwm14m1-pins { + rockchip,pins = + /* pwm14_m1 */ + <4 RK_PB2 11 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pwm14m2_pins: pwm14m2-pins { + rockchip,pins = + /* pwm14_m2 */ + <1 RK_PD6 11 &pcfg_pull_none>; + }; + }; + + pwm15 { + /omit-if-no-ref/ + pwm15m0_pins: pwm15m0-pins { + rockchip,pins = + /* pwm15_ir_m0 */ + <3 RK_PC3 11 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pwm15m1_pins: pwm15m1-pins { + rockchip,pins = + /* pwm15_ir_m1 */ + <4 RK_PB3 11 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pwm15m2_pins: pwm15m2-pins { + rockchip,pins = + /* pwm15_ir_m2 */ + <1 RK_PC6 11 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + pwm15m3_pins: pwm15m3-pins { + rockchip,pins = + /* pwm15_ir_m3 */ + <1 RK_PD7 11 &pcfg_pull_none>; + }; + }; + + refclk { + /omit-if-no-ref/ + refclk_pins: refclk-pins { + rockchip,pins = + /* refclk_out */ + <0 RK_PA0 1 &pcfg_pull_none>; + }; + }; + + sata { + /omit-if-no-ref/ + sata_pins: sata-pins { + rockchip,pins = + /* sata_cp_pod */ + <0 RK_PC6 13 &pcfg_pull_none>, + /* sata_cpdet */ + <0 RK_PD4 13 &pcfg_pull_none>, + /* sata_mp_switch */ + <0 RK_PD5 13 &pcfg_pull_none>; + }; + }; + + sata0 { + /omit-if-no-ref/ + sata0m0_pins: sata0m0-pins { + rockchip,pins = + /* sata0_act_led_m0 */ + <4 RK_PB6 6 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + sata0m1_pins: sata0m1-pins { + rockchip,pins = + /* sata0_act_led_m1 */ + <1 RK_PB3 6 &pcfg_pull_none>; + }; + }; + + sata1 { + /omit-if-no-ref/ + sata1m0_pins: sata1m0-pins { + rockchip,pins = + /* sata1_act_led_m0 */ + <4 RK_PB5 6 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + sata1m1_pins: sata1m1-pins { + rockchip,pins = + /* sata1_act_led_m1 */ + <1 RK_PA1 6 &pcfg_pull_none>; + }; + }; + + sata2 { + /omit-if-no-ref/ + sata2m0_pins: sata2m0-pins { + rockchip,pins = + /* sata2_act_led_m0 */ + <4 RK_PB1 6 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + sata2m1_pins: sata2m1-pins { + rockchip,pins = + /* sata2_act_led_m1 */ + <1 RK_PB7 6 &pcfg_pull_none>; + }; + }; + + sdio { + /omit-if-no-ref/ + sdiom1_pins: sdiom1-pins { + rockchip,pins = + /* sdio_clk_m1 */ + <3 RK_PA5 2 &pcfg_pull_none>, + /* sdio_cmd_m1 */ + <3 RK_PA4 2 &pcfg_pull_none>, + /* sdio_d0_m1 */ + <3 RK_PA0 2 &pcfg_pull_none>, + /* sdio_d1_m1 */ + <3 RK_PA1 2 &pcfg_pull_none>, + /* sdio_d2_m1 */ + <3 RK_PA2 2 &pcfg_pull_none>, + /* sdio_d3_m1 */ + <3 RK_PA3 2 &pcfg_pull_none>; + }; + }; + + sdmmc { + /omit-if-no-ref/ + sdmmc_bus4: sdmmc-bus4 { + rockchip,pins = + /* sdmmc_d0 */ + <4 RK_PD0 1 &pcfg_pull_up_drv_level_2>, + /* sdmmc_d1 */ + <4 RK_PD1 1 &pcfg_pull_up_drv_level_2>, + /* sdmmc_d2 */ + <4 RK_PD2 1 &pcfg_pull_up_drv_level_2>, + /* sdmmc_d3 */ + <4 RK_PD3 1 &pcfg_pull_up_drv_level_2>; + }; + + /omit-if-no-ref/ + sdmmc_clk: sdmmc-clk { + rockchip,pins = + /* sdmmc_clk */ + <4 RK_PD5 1 &pcfg_pull_up_drv_level_2>; + }; + + /omit-if-no-ref/ + sdmmc_cmd: sdmmc-cmd { + rockchip,pins = + /* sdmmc_cmd */ + <4 RK_PD4 1 &pcfg_pull_up_drv_level_2>; + }; + + /omit-if-no-ref/ + sdmmc_det: sdmmc-det { + rockchip,pins = + /* sdmmc_det */ + <0 RK_PA4 1 &pcfg_pull_up>; + }; + + /omit-if-no-ref/ + sdmmc_pwren: sdmmc-pwren { + rockchip,pins = + /* sdmmc_pwren */ + <0 RK_PA5 2 &pcfg_pull_none>; + }; + }; + + spdif0 { + /omit-if-no-ref/ + spdif0m0_tx: spdif0m0-tx { + rockchip,pins = + /* spdif0m0_tx */ + <1 RK_PB6 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + spdif0m1_tx: spdif0m1-tx { + rockchip,pins = + /* spdif0m1_tx */ + <4 RK_PB4 6 &pcfg_pull_none>; + }; + }; + + spdif1 { + /omit-if-no-ref/ + spdif1m0_tx: spdif1m0-tx { + rockchip,pins = + /* spdif1m0_tx */ + <1 RK_PB7 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + spdif1m1_tx: spdif1m1-tx { + rockchip,pins = + /* spdif1m1_tx */ + <4 RK_PB1 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + spdif1m2_tx: spdif1m2-tx { + rockchip,pins = + /* spdif1m2_tx */ + <4 RK_PC1 3 &pcfg_pull_none>; + }; + }; + + spi0 { + /omit-if-no-ref/ + spi0m0_pins: spi0m0-pins { + rockchip,pins = + /* spi0_clk_m0 */ + <0 RK_PC6 8 &pcfg_pull_up_drv_level_1>, + /* spi0_miso_m0 */ + <0 RK_PC7 8 &pcfg_pull_up_drv_level_1>, + /* spi0_mosi_m0 */ + <0 RK_PC0 8 &pcfg_pull_up_drv_level_1>; + }; + + /omit-if-no-ref/ + spi0m0_cs0: spi0m0-cs0 { + rockchip,pins = + /* spi0_cs0_m0 */ + <0 RK_PD1 8 &pcfg_pull_up_drv_level_1>; + }; + + /omit-if-no-ref/ + spi0m0_cs1: spi0m0-cs1 { + rockchip,pins = + /* spi0_cs1_m0 */ + <0 RK_PB7 8 &pcfg_pull_up_drv_level_1>; + }; + /omit-if-no-ref/ + spi0m1_pins: spi0m1-pins { + rockchip,pins = + /* spi0_clk_m1 */ + <4 RK_PA2 8 &pcfg_pull_up_drv_level_1>, + /* spi0_miso_m1 */ + <4 RK_PA0 8 &pcfg_pull_up_drv_level_1>, + /* spi0_mosi_m1 */ + <4 RK_PA1 8 &pcfg_pull_up_drv_level_1>; + }; + + /omit-if-no-ref/ + spi0m1_cs0: spi0m1-cs0 { + rockchip,pins = + /* spi0_cs0_m1 */ + <4 RK_PB2 8 &pcfg_pull_up_drv_level_1>; + }; + + /omit-if-no-ref/ + spi0m1_cs1: spi0m1-cs1 { + rockchip,pins = + /* spi0_cs1_m1 */ + <4 RK_PB1 8 &pcfg_pull_up_drv_level_1>; + }; + /omit-if-no-ref/ + spi0m2_pins: spi0m2-pins { + rockchip,pins = + /* spi0_clk_m2 */ + <1 RK_PB3 8 &pcfg_pull_up_drv_level_1>, + /* spi0_miso_m2 */ + <1 RK_PB1 8 &pcfg_pull_up_drv_level_1>, + /* spi0_mosi_m2 */ + <1 RK_PB2 8 &pcfg_pull_up_drv_level_1>; + }; + + /omit-if-no-ref/ + spi0m2_cs0: spi0m2-cs0 { + rockchip,pins = + /* spi0_cs0_m2 */ + <1 RK_PB4 8 &pcfg_pull_up_drv_level_1>; + }; + + /omit-if-no-ref/ + spi0m2_cs1: spi0m2-cs1 { + rockchip,pins = + /* spi0_cs1_m2 */ + <1 RK_PB5 8 &pcfg_pull_up_drv_level_1>; + }; + /omit-if-no-ref/ + spi0m3_pins: spi0m3-pins { + rockchip,pins = + /* spi0_clk_m3 */ + <3 RK_PD3 8 &pcfg_pull_up_drv_level_1>, + /* spi0_miso_m3 */ + <3 RK_PD1 8 &pcfg_pull_up_drv_level_1>, + /* spi0_mosi_m3 */ + <3 RK_PD2 8 &pcfg_pull_up_drv_level_1>; + }; + + /omit-if-no-ref/ + spi0m3_cs0: spi0m3-cs0 { + rockchip,pins = + /* spi0_cs0_m3 */ + <3 RK_PD4 8 &pcfg_pull_up_drv_level_1>; + }; + + /omit-if-no-ref/ + spi0m3_cs1: spi0m3-cs1 { + rockchip,pins = + /* spi0_cs1_m3 */ + <3 RK_PD5 8 &pcfg_pull_up_drv_level_1>; + }; + }; + + spi1 { + /omit-if-no-ref/ + spi1m1_pins: spi1m1-pins { + rockchip,pins = + /* spi1_clk_m1 */ + <3 RK_PC1 8 &pcfg_pull_up_drv_level_1>, + /* spi1_miso_m1 */ + <3 RK_PC0 8 &pcfg_pull_up_drv_level_1>, + /* spi1_mosi_m1 */ + <3 RK_PB7 8 &pcfg_pull_up_drv_level_1>; + }; + + /omit-if-no-ref/ + spi1m1_cs0: spi1m1-cs0 { + rockchip,pins = + /* spi1_cs0_m1 */ + <3 RK_PC2 8 &pcfg_pull_up_drv_level_1>; + }; + + /omit-if-no-ref/ + spi1m1_cs1: spi1m1-cs1 { + rockchip,pins = + /* spi1_cs1_m1 */ + <3 RK_PC3 8 &pcfg_pull_up_drv_level_1>; + }; + + /omit-if-no-ref/ + spi1m2_pins: spi1m2-pins { + rockchip,pins = + /* spi1_clk_m2 */ + <1 RK_PD2 8 &pcfg_pull_up_drv_level_1>, + /* spi1_miso_m2 */ + <1 RK_PD0 8 &pcfg_pull_up_drv_level_1>, + /* spi1_mosi_m2 */ + <1 RK_PD1 8 &pcfg_pull_up_drv_level_1>; + }; + + /omit-if-no-ref/ + spi1m2_cs0: spi1m2-cs0 { + rockchip,pins = + /* spi1_cs0_m2 */ + <1 RK_PD3 8 &pcfg_pull_up_drv_level_1>; + }; + + /omit-if-no-ref/ + spi1m2_cs1: spi1m2-cs1 { + rockchip,pins = + /* spi1_cs1_m2 */ + <1 RK_PD5 8 &pcfg_pull_up_drv_level_1>; + }; + }; + + spi2 { + /omit-if-no-ref/ + spi2m0_pins: spi2m0-pins { + rockchip,pins = + /* spi2_clk_m0 */ + <1 RK_PA6 8 &pcfg_pull_up_drv_level_1>, + /* spi2_miso_m0 */ + <1 RK_PA4 8 &pcfg_pull_up_drv_level_1>, + /* spi2_mosi_m0 */ + <1 RK_PA5 8 &pcfg_pull_up_drv_level_1>; + }; + + /omit-if-no-ref/ + spi2m0_cs0: spi2m0-cs0 { + rockchip,pins = + /* spi2_cs0_m0 */ + <1 RK_PA7 8 &pcfg_pull_up_drv_level_1>; + }; + + /omit-if-no-ref/ + spi2m0_cs1: spi2m0-cs1 { + rockchip,pins = + /* spi2_cs1_m0 */ + <1 RK_PB0 8 &pcfg_pull_up_drv_level_1>; + }; + + /omit-if-no-ref/ + spi2m1_pins: spi2m1-pins { + rockchip,pins = + /* spi2_clk_m1 */ + <4 RK_PA6 8 &pcfg_pull_up_drv_level_1>, + /* spi2_miso_m1 */ + <4 RK_PA4 8 &pcfg_pull_up_drv_level_1>, + /* spi2_mosi_m1 */ + <4 RK_PA5 8 &pcfg_pull_up_drv_level_1>; + }; + + /omit-if-no-ref/ + spi2m1_cs0: spi2m1-cs0 { + rockchip,pins = + /* spi2_cs0_m1 */ + <4 RK_PA7 8 &pcfg_pull_up_drv_level_1>; + }; + + /omit-if-no-ref/ + spi2m1_cs1: spi2m1-cs1 { + rockchip,pins = + /* spi2_cs1_m1 */ + <4 RK_PB0 8 &pcfg_pull_up_drv_level_1>; + }; + + /omit-if-no-ref/ + spi2m2_pins: spi2m2-pins { + rockchip,pins = + /* spi2_clk_m2 */ + <0 RK_PA5 1 &pcfg_pull_up_drv_level_1>, + /* spi2_miso_m2 */ + <0 RK_PB3 1 &pcfg_pull_up_drv_level_1>, + /* spi2_mosi_m2 */ + <0 RK_PA6 1 &pcfg_pull_up_drv_level_1>; + }; + + /omit-if-no-ref/ + spi2m2_cs0: spi2m2-cs0 { + rockchip,pins = + /* spi2_cs0_m2 */ + <0 RK_PB1 1 &pcfg_pull_up_drv_level_1>; + }; + + /omit-if-no-ref/ + spi2m2_cs1: spi2m2-cs1 { + rockchip,pins = + /* spi2_cs1_m2 */ + <0 RK_PB0 1 &pcfg_pull_up_drv_level_1>; + }; + }; + + spi3 { + /omit-if-no-ref/ + spi3m1_pins: spi3m1-pins { + rockchip,pins = + /* spi3_clk_m1 */ + <4 RK_PB7 8 &pcfg_pull_up_drv_level_1>, + /* spi3_miso_m1 */ + <4 RK_PB5 8 &pcfg_pull_up_drv_level_1>, + /* spi3_mosi_m1 */ + <4 RK_PB6 8 &pcfg_pull_up_drv_level_1>; + }; + + /omit-if-no-ref/ + spi3m1_cs0: spi3m1-cs0 { + rockchip,pins = + /* spi3_cs0_m1 */ + <4 RK_PC0 8 &pcfg_pull_up_drv_level_1>; + }; + + /omit-if-no-ref/ + spi3m1_cs1: spi3m1-cs1 { + rockchip,pins = + /* spi3_cs1_m1 */ + <4 RK_PC1 8 &pcfg_pull_up_drv_level_1>; + }; + + /omit-if-no-ref/ + spi3m2_pins: spi3m2-pins { + rockchip,pins = + /* spi3_clk_m2 */ + <0 RK_PD3 8 &pcfg_pull_up_drv_level_1>, + /* spi3_miso_m2 */ + <0 RK_PD0 8 &pcfg_pull_up_drv_level_1>, + /* spi3_mosi_m2 */ + <0 RK_PD2 8 &pcfg_pull_up_drv_level_1>; + }; + + /omit-if-no-ref/ + spi3m2_cs0: spi3m2-cs0 { + rockchip,pins = + /* spi3_cs0_m2 */ + <0 RK_PD4 8 &pcfg_pull_up_drv_level_1>; + }; + + /omit-if-no-ref/ + spi3m2_cs1: spi3m2-cs1 { + rockchip,pins = + /* spi3_cs1_m2 */ + <0 RK_PD5 8 &pcfg_pull_up_drv_level_1>; + }; + + /omit-if-no-ref/ + spi3m3_pins: spi3m3-pins { + rockchip,pins = + /* spi3_clk_m3 */ + <3 RK_PD0 8 &pcfg_pull_up_drv_level_1>, + /* spi3_miso_m3 */ + <3 RK_PC6 8 &pcfg_pull_up_drv_level_1>, + /* spi3_mosi_m3 */ + <3 RK_PC7 8 &pcfg_pull_up_drv_level_1>; + }; + + /omit-if-no-ref/ + spi3m3_cs0: spi3m3-cs0 { + rockchip,pins = + /* spi3_cs0_m3 */ + <3 RK_PC4 8 &pcfg_pull_up_drv_level_1>; + }; + + /omit-if-no-ref/ + spi3m3_cs1: spi3m3-cs1 { + rockchip,pins = + /* spi3_cs1_m3 */ + <3 RK_PC5 8 &pcfg_pull_up_drv_level_1>; + }; + }; + + spi4 { + /omit-if-no-ref/ + spi4m0_pins: spi4m0-pins { + rockchip,pins = + /* spi4_clk_m0 */ + <1 RK_PC2 8 &pcfg_pull_up_drv_level_1>, + /* spi4_miso_m0 */ + <1 RK_PC0 8 &pcfg_pull_up_drv_level_1>, + /* spi4_mosi_m0 */ + <1 RK_PC1 8 &pcfg_pull_up_drv_level_1>; + }; + + /omit-if-no-ref/ + spi4m0_cs0: spi4m0-cs0 { + rockchip,pins = + /* spi4_cs0_m0 */ + <1 RK_PC3 8 &pcfg_pull_up_drv_level_1>; + }; + + /omit-if-no-ref/ + spi4m0_cs1: spi4m0-cs1 { + rockchip,pins = + /* spi4_cs1_m0 */ + <1 RK_PC4 8 &pcfg_pull_up_drv_level_1>; + }; + + /omit-if-no-ref/ + spi4m1_pins: spi4m1-pins { + rockchip,pins = + /* spi4_clk_m1 */ + <3 RK_PA2 8 &pcfg_pull_up_drv_level_1>, + /* spi4_miso_m1 */ + <3 RK_PA0 8 &pcfg_pull_up_drv_level_1>, + /* spi4_mosi_m1 */ + <3 RK_PA1 8 &pcfg_pull_up_drv_level_1>; + }; + + /omit-if-no-ref/ + spi4m1_cs0: spi4m1-cs0 { + rockchip,pins = + /* spi4_cs0_m1 */ + <3 RK_PA3 8 &pcfg_pull_up_drv_level_1>; + }; + + /omit-if-no-ref/ + spi4m1_cs1: spi4m1-cs1 { + rockchip,pins = + /* spi4_cs1_m1 */ + <3 RK_PA4 8 &pcfg_pull_up_drv_level_1>; + }; + + /omit-if-no-ref/ + spi4m2_pins: spi4m2-pins { + rockchip,pins = + /* spi4_clk_m2 */ + <1 RK_PA2 8 &pcfg_pull_up_drv_level_1>, + /* spi4_miso_m2 */ + <1 RK_PA0 8 &pcfg_pull_up_drv_level_1>, + /* spi4_mosi_m2 */ + <1 RK_PA1 8 &pcfg_pull_up_drv_level_1>; + }; + + /omit-if-no-ref/ + spi4m2_cs0: spi4m2-cs0 { + rockchip,pins = + /* spi4_cs0_m2 */ + <1 RK_PA3 8 &pcfg_pull_up_drv_level_1>; + }; + }; + + tsadc { + /omit-if-no-ref/ + tsadcm1_shut: tsadcm1-shut { + rockchip,pins = + /* tsadcm1_shut */ + <0 RK_PA2 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + tsadc_shut: tsadc-shut { + rockchip,pins = + /* tsadc_shut */ + <0 RK_PA1 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + tsadc_shut_org: tsadc-shut-org { + rockchip,pins = + /* tsadc_shut_org */ + <0 RK_PA1 1 &pcfg_pull_none>; + }; + }; + + uart0 { + /omit-if-no-ref/ + uart0m0_xfer: uart0m0-xfer { + rockchip,pins = + /* uart0_rx_m0 */ + <0 RK_PC4 4 &pcfg_pull_up>, + /* uart0_tx_m0 */ + <0 RK_PC5 4 &pcfg_pull_up>; + }; + + /omit-if-no-ref/ + uart0m1_xfer: uart0m1-xfer { + rockchip,pins = + /* uart0_rx_m1 */ + <0 RK_PB0 4 &pcfg_pull_up>, + /* uart0_tx_m1 */ + <0 RK_PB1 4 &pcfg_pull_up>; + }; + + /omit-if-no-ref/ + uart0m2_xfer: uart0m2-xfer { + rockchip,pins = + /* uart0_rx_m2 */ + <4 RK_PA4 10 &pcfg_pull_up>, + /* uart0_tx_m2 */ + <4 RK_PA3 10 &pcfg_pull_up>; + }; + + /omit-if-no-ref/ + uart0_ctsn: uart0-ctsn { + rockchip,pins = + /* uart0_ctsn */ + <0 RK_PD1 4 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + uart0_rtsn: uart0-rtsn { + rockchip,pins = + /* uart0_rtsn */ + <0 RK_PC6 4 &pcfg_pull_none>; + }; + }; + + uart1 { + /omit-if-no-ref/ + uart1m1_xfer: uart1m1-xfer { + rockchip,pins = + /* uart1_rx_m1 */ + <1 RK_PB7 10 &pcfg_pull_up>, + /* uart1_tx_m1 */ + <1 RK_PB6 10 &pcfg_pull_up>; + }; + + /omit-if-no-ref/ + uart1m1_ctsn: uart1m1-ctsn { + rockchip,pins = + /* uart1m1_ctsn */ + <1 RK_PD7 10 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + uart1m1_rtsn: uart1m1-rtsn { + rockchip,pins = + /* uart1m1_rtsn */ + <1 RK_PD6 10 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + uart1m2_xfer: uart1m2-xfer { + rockchip,pins = + /* uart1_rx_m2 */ + <0 RK_PD2 10 &pcfg_pull_up>, + /* uart1_tx_m2 */ + <0 RK_PD1 10 &pcfg_pull_up>; + }; + + /omit-if-no-ref/ + uart1m2_ctsn: uart1m2-ctsn { + rockchip,pins = + /* uart1m2_ctsn */ + <0 RK_PD0 10 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + uart1m2_rtsn: uart1m2-rtsn { + rockchip,pins = + /* uart1m2_rtsn */ + <0 RK_PC7 10 &pcfg_pull_none>; + }; + }; + + uart2 { + /omit-if-no-ref/ + uart2m0_xfer: uart2m0-xfer { + rockchip,pins = + /* uart2_rx_m0 */ + <0 RK_PB6 10 &pcfg_pull_up>, + /* uart2_tx_m0 */ + <0 RK_PB5 10 &pcfg_pull_up>; + }; + + /omit-if-no-ref/ + uart2m1_xfer: uart2m1-xfer { + rockchip,pins = + /* uart2_rx_m1 */ + <4 RK_PD1 10 &pcfg_pull_up>, + /* uart2_tx_m1 */ + <4 RK_PD0 10 &pcfg_pull_up>; + }; + + /omit-if-no-ref/ + uart2m2_xfer: uart2m2-xfer { + rockchip,pins = + /* uart2_rx_m2 */ + <3 RK_PB2 10 &pcfg_pull_up>, + /* uart2_tx_m2 */ + <3 RK_PB1 10 &pcfg_pull_up>; + }; + + /omit-if-no-ref/ + uart2_ctsn: uart2-ctsn { + rockchip,pins = + /* uart2_ctsn */ + <3 RK_PB4 10 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + uart2_rtsn: uart2-rtsn { + rockchip,pins = + /* uart2_rtsn */ + <3 RK_PB3 10 &pcfg_pull_none>; + }; + }; + + uart3 { + /omit-if-no-ref/ + uart3m0_xfer: uart3m0-xfer { + rockchip,pins = + /* uart3_rx_m0 */ + <1 RK_PC0 10 &pcfg_pull_up>, + /* uart3_tx_m0 */ + <1 RK_PC1 10 &pcfg_pull_up>; + }; + + /omit-if-no-ref/ + uart3m1_xfer: uart3m1-xfer { + rockchip,pins = + /* uart3_rx_m1 */ + <3 RK_PB6 10 &pcfg_pull_up>, + /* uart3_tx_m1 */ + <3 RK_PB5 10 &pcfg_pull_up>; + }; + + /omit-if-no-ref/ + uart3m2_xfer: uart3m2-xfer { + rockchip,pins = + /* uart3_rx_m2 */ + <4 RK_PA6 10 &pcfg_pull_up>, + /* uart3_tx_m2 */ + <4 RK_PA5 10 &pcfg_pull_up>; + }; + + /omit-if-no-ref/ + uart3_ctsn: uart3-ctsn { + rockchip,pins = + /* uart3_ctsn */ + <1 RK_PC3 10 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + uart3_rtsn: uart3-rtsn { + rockchip,pins = + /* uart3_rtsn */ + <1 RK_PC2 10 &pcfg_pull_none>; + }; + }; + + uart4 { + /omit-if-no-ref/ + uart4m0_xfer: uart4m0-xfer { + rockchip,pins = + /* uart4_rx_m0 */ + <1 RK_PD3 10 &pcfg_pull_up>, + /* uart4_tx_m0 */ + <1 RK_PD2 10 &pcfg_pull_up>; + }; + + /omit-if-no-ref/ + uart4m1_xfer: uart4m1-xfer { + rockchip,pins = + /* uart4_rx_m1 */ + <3 RK_PD0 10 &pcfg_pull_up>, + /* uart4_tx_m1 */ + <3 RK_PD1 10 &pcfg_pull_up>; + }; + + /omit-if-no-ref/ + uart4m2_xfer: uart4m2-xfer { + rockchip,pins = + /* uart4_rx_m2 */ + <1 RK_PB2 10 &pcfg_pull_up>, + /* uart4_tx_m2 */ + <1 RK_PB3 10 &pcfg_pull_up>; + }; + + /omit-if-no-ref/ + uart4_ctsn: uart4-ctsn { + rockchip,pins = + /* uart4_ctsn */ + <1 RK_PC7 10 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + uart4_rtsn: uart4-rtsn { + rockchip,pins = + /* uart4_rtsn */ + <1 RK_PC5 10 &pcfg_pull_none>; + }; + }; + + uart5 { + /omit-if-no-ref/ + uart5m0_xfer: uart5m0-xfer { + rockchip,pins = + /* uart5_rx_m0 */ + <4 RK_PD4 10 &pcfg_pull_up>, + /* uart5_tx_m0 */ + <4 RK_PD5 10 &pcfg_pull_up>; + }; + + /omit-if-no-ref/ + uart5m0_ctsn: uart5m0-ctsn { + rockchip,pins = + /* uart5m0_ctsn */ + <4 RK_PD2 10 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + uart5m0_rtsn: uart5m0-rtsn { + rockchip,pins = + /* uart5m0_rtsn */ + <4 RK_PD3 10 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + uart5m1_xfer: uart5m1-xfer { + rockchip,pins = + /* uart5_rx_m1 */ + <3 RK_PC5 10 &pcfg_pull_up>, + /* uart5_tx_m1 */ + <3 RK_PC4 10 &pcfg_pull_up>; + }; + + /omit-if-no-ref/ + uart5m1_ctsn: uart5m1-ctsn { + rockchip,pins = + /* uart5m1_ctsn */ + <2 RK_PA2 10 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + uart5m1_rtsn: uart5m1-rtsn { + rockchip,pins = + /* uart5m1_rtsn */ + <2 RK_PA3 10 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + uart5m2_xfer: uart5m2-xfer { + rockchip,pins = + /* uart5_rx_m2 */ + <2 RK_PD4 10 &pcfg_pull_up>, + /* uart5_tx_m2 */ + <2 RK_PD5 10 &pcfg_pull_up>; + }; + }; + + uart6 { + /omit-if-no-ref/ + uart6m1_xfer: uart6m1-xfer { + rockchip,pins = + /* uart6_rx_m1 */ + <1 RK_PA0 10 &pcfg_pull_up>, + /* uart6_tx_m1 */ + <1 RK_PA1 10 &pcfg_pull_up>; + }; + + /omit-if-no-ref/ + uart6m1_ctsn: uart6m1-ctsn { + rockchip,pins = + /* uart6m1_ctsn */ + <1 RK_PA3 10 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + uart6m1_rtsn: uart6m1-rtsn { + rockchip,pins = + /* uart6m1_rtsn */ + <1 RK_PA2 10 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + uart6m2_xfer: uart6m2-xfer { + rockchip,pins = + /* uart6_rx_m2 */ + <1 RK_PD1 10 &pcfg_pull_up>, + /* uart6_tx_m2 */ + <1 RK_PD0 10 &pcfg_pull_up>; + }; + }; + + uart7 { + /omit-if-no-ref/ + uart7m1_xfer: uart7m1-xfer { + rockchip,pins = + /* uart7_rx_m1 */ + <3 RK_PC1 10 &pcfg_pull_up>, + /* uart7_tx_m1 */ + <3 RK_PC0 10 &pcfg_pull_up>; + }; + + /omit-if-no-ref/ + uart7m1_ctsn: uart7m1-ctsn { + rockchip,pins = + /* uart7m1_ctsn */ + <3 RK_PC3 10 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + uart7m1_rtsn: uart7m1-rtsn { + rockchip,pins = + /* uart7m1_rtsn */ + <3 RK_PC2 10 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + uart7m2_xfer: uart7m2-xfer { + rockchip,pins = + /* uart7_rx_m2 */ + <1 RK_PB4 10 &pcfg_pull_up>, + /* uart7_tx_m2 */ + <1 RK_PB5 10 &pcfg_pull_up>; + }; + }; + + uart8 { + /omit-if-no-ref/ + uart8m0_xfer: uart8m0-xfer { + rockchip,pins = + /* uart8_rx_m0 */ + <4 RK_PB1 10 &pcfg_pull_up>, + /* uart8_tx_m0 */ + <4 RK_PB0 10 &pcfg_pull_up>; + }; + + /omit-if-no-ref/ + uart8m0_ctsn: uart8m0-ctsn { + rockchip,pins = + /* uart8m0_ctsn */ + <4 RK_PB3 10 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + uart8m0_rtsn: uart8m0-rtsn { + rockchip,pins = + /* uart8m0_rtsn */ + <4 RK_PB2 10 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + uart8m1_xfer: uart8m1-xfer { + rockchip,pins = + /* uart8_rx_m1 */ + <3 RK_PA3 10 &pcfg_pull_up>, + /* uart8_tx_m1 */ + <3 RK_PA2 10 &pcfg_pull_up>; + }; + + /omit-if-no-ref/ + uart8m1_ctsn: uart8m1-ctsn { + rockchip,pins = + /* uart8m1_ctsn */ + <3 RK_PA5 10 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + uart8m1_rtsn: uart8m1-rtsn { + rockchip,pins = + /* uart8m1_rtsn */ + <3 RK_PA4 10 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + uart8_xfer: uart8-xfer { + rockchip,pins = + /* uart8_rx_ */ + <4 RK_PB1 10 &pcfg_pull_up>; + }; + }; + + uart9 { + /omit-if-no-ref/ + uart9m1_xfer: uart9m1-xfer { + rockchip,pins = + /* uart9_rx_m1 */ + <4 RK_PB5 10 &pcfg_pull_up>, + /* uart9_tx_m1 */ + <4 RK_PB4 10 &pcfg_pull_up>; + }; + + /omit-if-no-ref/ + uart9m1_ctsn: uart9m1-ctsn { + rockchip,pins = + /* uart9m1_ctsn */ + <4 RK_PA1 10 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + uart9m1_rtsn: uart9m1-rtsn { + rockchip,pins = + /* uart9m1_rtsn */ + <4 RK_PA0 10 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + uart9m2_xfer: uart9m2-xfer { + rockchip,pins = + /* uart9_rx_m2 */ + <3 RK_PD4 10 &pcfg_pull_up>, + /* uart9_tx_m2 */ + <3 RK_PD5 10 &pcfg_pull_up>; + }; + + /omit-if-no-ref/ + uart9m2_ctsn: uart9m2-ctsn { + rockchip,pins = + /* uart9m2_ctsn */ + <3 RK_PD3 10 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + uart9m2_rtsn: uart9m2-rtsn { + rockchip,pins = + /* uart9m2_rtsn */ + <3 RK_PD2 10 &pcfg_pull_none>; + }; + }; + + vop { + /omit-if-no-ref/ + vop_pins: vop-pins { + rockchip,pins = + /* vop_post_empty */ + <1 RK_PA2 1 &pcfg_pull_none>; + }; + }; +}; + +/* + * This part is edited handly. + */ +&pinctrl { + bt656 { + /omit-if-no-ref/ + bt656_pins: bt656-pins { + rockchip,pins = + /* bt1120_clkout */ + <4 RK_PB0 2 &pcfg_pull_none_drv_level_2>, + /* bt1120_d0 */ + <4 RK_PA0 2 &pcfg_pull_none_drv_level_2>, + /* bt1120_d1 */ + <4 RK_PA1 2 &pcfg_pull_none_drv_level_2>, + /* bt1120_d2 */ + <4 RK_PA2 2 &pcfg_pull_none_drv_level_2>, + /* bt1120_d3 */ + <4 RK_PA3 2 &pcfg_pull_none_drv_level_2>, + /* bt1120_d4 */ + <4 RK_PA4 2 &pcfg_pull_none_drv_level_2>, + /* bt1120_d5 */ + <4 RK_PA5 2 &pcfg_pull_none_drv_level_2>, + /* bt1120_d6 */ + <4 RK_PA6 2 &pcfg_pull_none_drv_level_2>, + /* bt1120_d7 */ + <4 RK_PA7 2 &pcfg_pull_none_drv_level_2>; + }; + }; + + gpio-func { + /omit-if-no-ref/ + tsadc_gpio_func: tsadc-gpio-func { + rockchip,pins = + <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts new file mode 100644 index 000000000000..901825514f9d --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts @@ -0,0 +1,73 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include "rk3588s.dtsi" + +/ { + model = "Radxa ROCK 5 Model A"; + compatible = "radxa,rock-5a", "rockchip,rk3588s"; + + aliases { + mmc0 = &sdhci; + serial2 = &uart2; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; +}; + +&gmac1 { + clock_in_out = "output"; + phy-handle = <&rgmii_phy1>; + phy-mode = "rgmii"; + pinctrl-0 = <&gmac1_miim + &gmac1_tx_bus2 + &gmac1_rx_bus2 + &gmac1_rgmii_clk + &gmac1_rgmii_bus>; + pinctrl-names = "default"; + tx_delay = <0x3a>; + rx_delay = <0x3e>; + status = "okay"; +}; + +&mdio1 { + rgmii_phy1: ethernet-phy@1 { + /* RTL8211F */ + compatible = "ethernet-phy-id001c.c916"; + reg = <0x1>; + pinctrl-names = "default"; + pinctrl-0 = <&rtl8211f_rst>; + reset-assert-us = <20000>; + reset-deassert-us = <100000>; + reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; + }; +}; + +&pinctrl { + rtl8211f { + rtl8211f_rst: rtl8211f-rst { + rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&sdhci { + bus-width = <8>; + no-sdio; + no-sd; + non-removable; + max-frequency = <200000000>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + status = "okay"; +}; + +&uart2 { + pinctrl-0 = <&uart2m0_xfer>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi new file mode 100644 index 000000000000..005cde61b4b2 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi @@ -0,0 +1,1703 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2021 Rockchip Electronics Co., Ltd. + */ + +#include <dt-bindings/clock/rockchip,rk3588-cru.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/power/rk3588-power.h> +#include <dt-bindings/reset/rockchip,rk3588-cru.h> + +/ { + compatible = "rockchip,rk3588"; + + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu_l0>; + }; + core1 { + cpu = <&cpu_l1>; + }; + core2 { + cpu = <&cpu_l2>; + }; + core3 { + cpu = <&cpu_l3>; + }; + }; + cluster1 { + core0 { + cpu = <&cpu_b0>; + }; + core1 { + cpu = <&cpu_b1>; + }; + }; + cluster2 { + core0 { + cpu = <&cpu_b2>; + }; + core1 { + cpu = <&cpu_b3>; + }; + }; + }; + + cpu_l0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0>; + enable-method = "psci"; + capacity-dmips-mhz = <530>; + clocks = <&scmi_clk SCMI_CLK_CPUL>; + cpu-idle-states = <&CPU_SLEEP>; + i-cache-size = <32768>; + i-cache-line-size = <64>; + i-cache-sets = <128>; + d-cache-size = <32768>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_cache_l0>; + dynamic-power-coefficient = <228>; + #cooling-cells = <2>; + }; + + cpu_l1: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x100>; + enable-method = "psci"; + capacity-dmips-mhz = <530>; + clocks = <&scmi_clk SCMI_CLK_CPUL>; + cpu-idle-states = <&CPU_SLEEP>; + i-cache-size = <32768>; + i-cache-line-size = <64>; + i-cache-sets = <128>; + d-cache-size = <32768>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_cache_l1>; + dynamic-power-coefficient = <228>; + #cooling-cells = <2>; + }; + + cpu_l2: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x200>; + enable-method = "psci"; + capacity-dmips-mhz = <530>; + clocks = <&scmi_clk SCMI_CLK_CPUL>; + cpu-idle-states = <&CPU_SLEEP>; + i-cache-size = <32768>; + i-cache-line-size = <64>; + i-cache-sets = <128>; + d-cache-size = <32768>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_cache_l2>; + dynamic-power-coefficient = <228>; + #cooling-cells = <2>; + }; + + cpu_l3: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x300>; + enable-method = "psci"; + capacity-dmips-mhz = <530>; + clocks = <&scmi_clk SCMI_CLK_CPUL>; + cpu-idle-states = <&CPU_SLEEP>; + i-cache-size = <32768>; + i-cache-line-size = <64>; + i-cache-sets = <128>; + d-cache-size = <32768>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_cache_l3>; + dynamic-power-coefficient = <228>; + #cooling-cells = <2>; + }; + + cpu_b0: cpu@400 { + device_type = "cpu"; + compatible = "arm,cortex-a76"; + reg = <0x400>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + clocks = <&scmi_clk SCMI_CLK_CPUB01>; + cpu-idle-states = <&CPU_SLEEP>; + i-cache-size = <65536>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <65536>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_cache_b0>; + dynamic-power-coefficient = <416>; + #cooling-cells = <2>; + }; + + cpu_b1: cpu@500 { + device_type = "cpu"; + compatible = "arm,cortex-a76"; + reg = <0x500>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + clocks = <&scmi_clk SCMI_CLK_CPUB01>; + cpu-idle-states = <&CPU_SLEEP>; + i-cache-size = <65536>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <65536>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_cache_b1>; + dynamic-power-coefficient = <416>; + #cooling-cells = <2>; + }; + + cpu_b2: cpu@600 { + device_type = "cpu"; + compatible = "arm,cortex-a76"; + reg = <0x600>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + clocks = <&scmi_clk SCMI_CLK_CPUB23>; + cpu-idle-states = <&CPU_SLEEP>; + i-cache-size = <65536>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <65536>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_cache_b2>; + dynamic-power-coefficient = <416>; + #cooling-cells = <2>; + }; + + cpu_b3: cpu@700 { + device_type = "cpu"; + compatible = "arm,cortex-a76"; + reg = <0x700>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + clocks = <&scmi_clk SCMI_CLK_CPUB23>; + cpu-idle-states = <&CPU_SLEEP>; + i-cache-size = <65536>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <65536>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_cache_b3>; + dynamic-power-coefficient = <416>; + #cooling-cells = <2>; + }; + + idle-states { + entry-method = "psci"; + CPU_SLEEP: cpu-sleep { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x0010000>; + entry-latency-us = <100>; + exit-latency-us = <120>; + min-residency-us = <1000>; + }; + }; + + l2_cache_l0: l2-cache-l0 { + compatible = "cache"; + cache-size = <131072>; + cache-line-size = <64>; + cache-sets = <512>; + next-level-cache = <&l3_cache>; + }; + + l2_cache_l1: l2-cache-l1 { + compatible = "cache"; + cache-size = <131072>; + cache-line-size = <64>; + cache-sets = <512>; + next-level-cache = <&l3_cache>; + }; + + l2_cache_l2: l2-cache-l2 { + compatible = "cache"; + cache-size = <131072>; + cache-line-size = <64>; + cache-sets = <512>; + next-level-cache = <&l3_cache>; + }; + + l2_cache_l3: l2-cache-l3 { + compatible = "cache"; + cache-size = <131072>; + cache-line-size = <64>; + cache-sets = <512>; + next-level-cache = <&l3_cache>; + }; + + l2_cache_b0: l2-cache-b0 { + compatible = "cache"; + cache-size = <524288>; + cache-line-size = <64>; + cache-sets = <1024>; + next-level-cache = <&l3_cache>; + }; + + l2_cache_b1: l2-cache-b1 { + compatible = "cache"; + cache-size = <524288>; + cache-line-size = <64>; + cache-sets = <1024>; + next-level-cache = <&l3_cache>; + }; + + l2_cache_b2: l2-cache-b2 { + compatible = "cache"; + cache-size = <524288>; + cache-line-size = <64>; + cache-sets = <1024>; + next-level-cache = <&l3_cache>; + }; + + l2_cache_b3: l2-cache-b3 { + compatible = "cache"; + cache-size = <524288>; + cache-line-size = <64>; + cache-sets = <1024>; + next-level-cache = <&l3_cache>; + }; + + l3_cache: l3-cache { + compatible = "cache"; + cache-size = <3145728>; + cache-line-size = <64>; + cache-sets = <4096>; + }; + }; + + firmware { + optee: optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + + scmi: scmi { + compatible = "arm,scmi-smc"; + arm,smc-id = <0x82000010>; + shmem = <&scmi_shmem>; + #address-cells = <1>; + #size-cells = <0>; + + scmi_clk: protocol@14 { + reg = <0x14>; + assigned-clocks = <&scmi_clk SCMI_CLK_CPUB01>, + <&scmi_clk SCMI_CLK_CPUB23>; + assigned-clock-rates = <1200000000>, + <1200000000>; + #clock-cells = <1>; + }; + + scmi_reset: protocol@16 { + reg = <0x16>; + #reset-cells = <1>; + }; + }; + }; + + pmu-a55 { + compatible = "arm,cortex-a55-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_partition0>; + }; + + pmu-a76 { + compatible = "arm,cortex-a76-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_partition1>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + spll: clock-0 { + compatible = "fixed-clock"; + clock-frequency = <702000000>; + clock-output-names = "spll"; + #clock-cells = <0>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_PPI 12 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "sec-phys", "phys", "virt", "hyp-phys", "hyp-virt"; + }; + + xin24m: clock-1 { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "xin24m"; + #clock-cells = <0>; + }; + + xin32k: clock-2 { + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "xin32k"; + #clock-cells = <0>; + }; + + pmu_sram: sram@10f000 { + compatible = "mmio-sram"; + reg = <0x0 0x0010f000 0x0 0x100>; + ranges = <0 0x0 0x0010f000 0x100>; + #address-cells = <1>; + #size-cells = <1>; + + scmi_shmem: sram@0 { + compatible = "arm,scmi-shmem"; + reg = <0x0 0x100>; + }; + }; + + sys_grf: syscon@fd58c000 { + compatible = "rockchip,rk3588-sys-grf", "syscon"; + reg = <0x0 0xfd58c000 0x0 0x1000>; + }; + + php_grf: syscon@fd5b0000 { + compatible = "rockchip,rk3588-php-grf", "syscon"; + reg = <0x0 0xfd5b0000 0x0 0x1000>; + }; + + ioc: syscon@fd5f0000 { + compatible = "rockchip,rk3588-ioc", "syscon"; + reg = <0x0 0xfd5f0000 0x0 0x10000>; + }; + + system_sram1: sram@fd600000 { + compatible = "mmio-sram"; + reg = <0x0 0xfd600000 0x0 0x100000>; + ranges = <0x0 0x0 0xfd600000 0x100000>; + #address-cells = <1>; + #size-cells = <1>; + }; + + cru: clock-controller@fd7c0000 { + compatible = "rockchip,rk3588-cru"; + reg = <0x0 0xfd7c0000 0x0 0x5c000>; + assigned-clocks = + <&cru PLL_PPLL>, <&cru PLL_AUPLL>, + <&cru PLL_NPLL>, <&cru PLL_GPLL>, + <&cru ACLK_CENTER_ROOT>, + <&cru HCLK_CENTER_ROOT>, <&cru ACLK_CENTER_LOW_ROOT>, + <&cru ACLK_TOP_ROOT>, <&cru PCLK_TOP_ROOT>, + <&cru ACLK_LOW_TOP_ROOT>, <&cru PCLK_PMU0_ROOT>, + <&cru HCLK_PMU_CM0_ROOT>, <&cru ACLK_VOP>, + <&cru ACLK_BUS_ROOT>, <&cru CLK_150M_SRC>, + <&cru CLK_GPU>; + assigned-clock-rates = + <100000000>, <786432000>, + <850000000>, <1188000000>, + <702000000>, + <400000000>, <500000000>, + <800000000>, <100000000>, + <400000000>, <100000000>, + <200000000>, <500000000>, + <375000000>, <150000000>, + <200000000>; + rockchip,grf = <&php_grf>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + i2c0: i2c@fd880000 { + compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c"; + reg = <0x0 0xfd880000 0x0 0x1000>; + interrupts = <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru CLK_I2C0>, <&cru PCLK_I2C0>; + clock-names = "i2c", "pclk"; + pinctrl-0 = <&i2c0m0_xfer>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart0: serial@fd890000 { + compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart"; + reg = <0x0 0xfd890000 0x0 0x100>; + interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac0 6>, <&dmac0 7>; + dma-names = "tx", "rx"; + pinctrl-0 = <&uart0m1_xfer>; + pinctrl-names = "default"; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + pwm0: pwm@fd8b0000 { + compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xfd8b0000 0x0 0x10>; + clocks = <&cru CLK_PMU1PWM>, <&cru PCLK_PMU1PWM>; + clock-names = "pwm", "pclk"; + pinctrl-0 = <&pwm0m0_pins>; + pinctrl-names = "default"; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm1: pwm@fd8b0010 { + compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xfd8b0010 0x0 0x10>; + clocks = <&cru CLK_PMU1PWM>, <&cru PCLK_PMU1PWM>; + clock-names = "pwm", "pclk"; + pinctrl-0 = <&pwm1m0_pins>; + pinctrl-names = "default"; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm2: pwm@fd8b0020 { + compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xfd8b0020 0x0 0x10>; + clocks = <&cru CLK_PMU1PWM>, <&cru PCLK_PMU1PWM>; + clock-names = "pwm", "pclk"; + pinctrl-0 = <&pwm2m0_pins>; + pinctrl-names = "default"; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm3: pwm@fd8b0030 { + compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xfd8b0030 0x0 0x10>; + clocks = <&cru CLK_PMU1PWM>, <&cru PCLK_PMU1PWM>; + clock-names = "pwm", "pclk"; + pinctrl-0 = <&pwm3m0_pins>; + pinctrl-names = "default"; + #pwm-cells = <3>; + status = "disabled"; + }; + + pmu: power-management@fd8d8000 { + compatible = "rockchip,rk3588-pmu", "syscon", "simple-mfd"; + reg = <0x0 0xfd8d8000 0x0 0x400>; + + power: power-controller { + compatible = "rockchip,rk3588-power-controller"; + #address-cells = <1>; + #power-domain-cells = <1>; + #size-cells = <0>; + status = "okay"; + + /* These power domains are grouped by VD_NPU */ + power-domain@RK3588_PD_NPU { + reg = <RK3588_PD_NPU>; + #power-domain-cells = <0>; + #address-cells = <1>; + #size-cells = <0>; + + power-domain@RK3588_PD_NPUTOP { + reg = <RK3588_PD_NPUTOP>; + clocks = <&cru HCLK_NPU_ROOT>, + <&cru PCLK_NPU_ROOT>, + <&cru CLK_NPU_DSU0>, + <&cru HCLK_NPU_CM0_ROOT>; + pm_qos = <&qos_npu0_mwr>, + <&qos_npu0_mro>, + <&qos_mcu_npu>; + #power-domain-cells = <0>; + #address-cells = <1>; + #size-cells = <0>; + + power-domain@RK3588_PD_NPU1 { + reg = <RK3588_PD_NPU1>; + clocks = <&cru HCLK_NPU_ROOT>, + <&cru PCLK_NPU_ROOT>, + <&cru CLK_NPU_DSU0>; + pm_qos = <&qos_npu1>; + #power-domain-cells = <0>; + }; + power-domain@RK3588_PD_NPU2 { + reg = <RK3588_PD_NPU2>; + clocks = <&cru HCLK_NPU_ROOT>, + <&cru PCLK_NPU_ROOT>, + <&cru CLK_NPU_DSU0>; + pm_qos = <&qos_npu2>; + #power-domain-cells = <0>; + }; + }; + }; + /* These power domains are grouped by VD_GPU */ + power-domain@RK3588_PD_GPU { + reg = <RK3588_PD_GPU>; + clocks = <&cru CLK_GPU>, + <&cru CLK_GPU_COREGROUP>, + <&cru CLK_GPU_STACKS>; + pm_qos = <&qos_gpu_m0>, + <&qos_gpu_m1>, + <&qos_gpu_m2>, + <&qos_gpu_m3>; + #power-domain-cells = <0>; + }; + /* These power domains are grouped by VD_VCODEC */ + power-domain@RK3588_PD_VCODEC { + reg = <RK3588_PD_VCODEC>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <0>; + + power-domain@RK3588_PD_RKVDEC0 { + reg = <RK3588_PD_RKVDEC0>; + clocks = <&cru HCLK_RKVDEC0>, + <&cru HCLK_VDPU_ROOT>, + <&cru ACLK_VDPU_ROOT>, + <&cru ACLK_RKVDEC0>, + <&cru ACLK_RKVDEC_CCU>; + pm_qos = <&qos_rkvdec0>; + #power-domain-cells = <0>; + }; + power-domain@RK3588_PD_RKVDEC1 { + reg = <RK3588_PD_RKVDEC1>; + clocks = <&cru HCLK_RKVDEC1>, + <&cru HCLK_VDPU_ROOT>, + <&cru ACLK_VDPU_ROOT>, + <&cru ACLK_RKVDEC1>; + pm_qos = <&qos_rkvdec1>; + #power-domain-cells = <0>; + }; + power-domain@RK3588_PD_VENC0 { + reg = <RK3588_PD_VENC0>; + clocks = <&cru HCLK_RKVENC0>, + <&cru ACLK_RKVENC0>; + pm_qos = <&qos_rkvenc0_m0ro>, + <&qos_rkvenc0_m1ro>, + <&qos_rkvenc0_m2wo>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <0>; + + power-domain@RK3588_PD_VENC1 { + reg = <RK3588_PD_VENC1>; + clocks = <&cru HCLK_RKVENC1>, + <&cru HCLK_RKVENC0>, + <&cru ACLK_RKVENC0>, + <&cru ACLK_RKVENC1>; + pm_qos = <&qos_rkvenc1_m0ro>, + <&qos_rkvenc1_m1ro>, + <&qos_rkvenc1_m2wo>; + #power-domain-cells = <0>; + }; + }; + }; + /* These power domains are grouped by VD_LOGIC */ + power-domain@RK3588_PD_VDPU { + reg = <RK3588_PD_VDPU>; + clocks = <&cru HCLK_VDPU_ROOT>, + <&cru ACLK_VDPU_LOW_ROOT>, + <&cru ACLK_VDPU_ROOT>, + <&cru ACLK_JPEG_DECODER_ROOT>, + <&cru ACLK_IEP2P0>, + <&cru HCLK_IEP2P0>, + <&cru ACLK_JPEG_ENCODER0>, + <&cru HCLK_JPEG_ENCODER0>, + <&cru ACLK_JPEG_ENCODER1>, + <&cru HCLK_JPEG_ENCODER1>, + <&cru ACLK_JPEG_ENCODER2>, + <&cru HCLK_JPEG_ENCODER2>, + <&cru ACLK_JPEG_ENCODER3>, + <&cru HCLK_JPEG_ENCODER3>, + <&cru ACLK_JPEG_DECODER>, + <&cru HCLK_JPEG_DECODER>, + <&cru ACLK_RGA2>, + <&cru HCLK_RGA2>; + pm_qos = <&qos_iep>, + <&qos_jpeg_dec>, + <&qos_jpeg_enc0>, + <&qos_jpeg_enc1>, + <&qos_jpeg_enc2>, + <&qos_jpeg_enc3>, + <&qos_rga2_mro>, + <&qos_rga2_mwo>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <0>; + + + power-domain@RK3588_PD_AV1 { + reg = <RK3588_PD_AV1>; + clocks = <&cru PCLK_AV1>, + <&cru ACLK_AV1>, + <&cru HCLK_VDPU_ROOT>; + pm_qos = <&qos_av1>; + #power-domain-cells = <0>; + }; + power-domain@RK3588_PD_RKVDEC0 { + reg = <RK3588_PD_RKVDEC0>; + clocks = <&cru HCLK_RKVDEC0>, + <&cru HCLK_VDPU_ROOT>, + <&cru ACLK_VDPU_ROOT>, + <&cru ACLK_RKVDEC0>; + pm_qos = <&qos_rkvdec0>; + #power-domain-cells = <0>; + }; + power-domain@RK3588_PD_RKVDEC1 { + reg = <RK3588_PD_RKVDEC1>; + clocks = <&cru HCLK_RKVDEC1>, + <&cru HCLK_VDPU_ROOT>, + <&cru ACLK_VDPU_ROOT>; + pm_qos = <&qos_rkvdec1>; + #power-domain-cells = <0>; + }; + power-domain@RK3588_PD_RGA30 { + reg = <RK3588_PD_RGA30>; + clocks = <&cru ACLK_RGA3_0>, + <&cru HCLK_RGA3_0>; + pm_qos = <&qos_rga3_0>; + #power-domain-cells = <0>; + }; + }; + power-domain@RK3588_PD_VOP { + reg = <RK3588_PD_VOP>; + clocks = <&cru PCLK_VOP_ROOT>, + <&cru HCLK_VOP_ROOT>, + <&cru ACLK_VOP>; + pm_qos = <&qos_vop_m0>, + <&qos_vop_m1>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <0>; + + power-domain@RK3588_PD_VO0 { + reg = <RK3588_PD_VO0>; + clocks = <&cru PCLK_VO0_ROOT>, + <&cru PCLK_VO0_S_ROOT>, + <&cru HCLK_VO0_S_ROOT>, + <&cru ACLK_VO0_ROOT>, + <&cru HCLK_HDCP0>, + <&cru ACLK_HDCP0>, + <&cru HCLK_VOP_ROOT>; + pm_qos = <&qos_hdcp0>; + #power-domain-cells = <0>; + }; + }; + power-domain@RK3588_PD_VO1 { + reg = <RK3588_PD_VO1>; + clocks = <&cru PCLK_VO1_ROOT>, + <&cru PCLK_VO1_S_ROOT>, + <&cru HCLK_VO1_S_ROOT>, + <&cru HCLK_HDCP1>, + <&cru ACLK_HDCP1>, + <&cru ACLK_HDMIRX_ROOT>, + <&cru HCLK_VO1USB_TOP_ROOT>; + pm_qos = <&qos_hdcp1>, + <&qos_hdmirx>; + #power-domain-cells = <0>; + }; + power-domain@RK3588_PD_VI { + reg = <RK3588_PD_VI>; + clocks = <&cru HCLK_VI_ROOT>, + <&cru PCLK_VI_ROOT>, + <&cru HCLK_ISP0>, + <&cru ACLK_ISP0>, + <&cru HCLK_VICAP>, + <&cru ACLK_VICAP>; + pm_qos = <&qos_isp0_mro>, + <&qos_isp0_mwo>, + <&qos_vicap_m0>, + <&qos_vicap_m1>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <0>; + + power-domain@RK3588_PD_ISP1 { + reg = <RK3588_PD_ISP1>; + clocks = <&cru HCLK_ISP1>, + <&cru ACLK_ISP1>, + <&cru HCLK_VI_ROOT>, + <&cru PCLK_VI_ROOT>; + pm_qos = <&qos_isp1_mwo>, + <&qos_isp1_mro>; + #power-domain-cells = <0>; + }; + power-domain@RK3588_PD_FEC { + reg = <RK3588_PD_FEC>; + clocks = <&cru HCLK_FISHEYE0>, + <&cru ACLK_FISHEYE0>, + <&cru HCLK_FISHEYE1>, + <&cru ACLK_FISHEYE1>, + <&cru PCLK_VI_ROOT>; + pm_qos = <&qos_fisheye0>, + <&qos_fisheye1>; + #power-domain-cells = <0>; + }; + }; + power-domain@RK3588_PD_RGA31 { + reg = <RK3588_PD_RGA31>; + clocks = <&cru HCLK_RGA3_1>, + <&cru ACLK_RGA3_1>; + pm_qos = <&qos_rga3_1>; + #power-domain-cells = <0>; + }; + power-domain@RK3588_PD_USB { + reg = <RK3588_PD_USB>; + clocks = <&cru PCLK_PHP_ROOT>, + <&cru ACLK_USB_ROOT>, + <&cru HCLK_USB_ROOT>, + <&cru HCLK_HOST0>, + <&cru HCLK_HOST_ARB0>, + <&cru HCLK_HOST1>, + <&cru HCLK_HOST_ARB1>; + pm_qos = <&qos_usb3_0>, + <&qos_usb3_1>, + <&qos_usb2host_0>, + <&qos_usb2host_1>; + #power-domain-cells = <0>; + }; + power-domain@RK3588_PD_GMAC { + reg = <RK3588_PD_GMAC>; + clocks = <&cru PCLK_PHP_ROOT>, + <&cru ACLK_PCIE_ROOT>, + <&cru ACLK_PHP_ROOT>; + #power-domain-cells = <0>; + }; + power-domain@RK3588_PD_PCIE { + reg = <RK3588_PD_PCIE>; + clocks = <&cru PCLK_PHP_ROOT>, + <&cru ACLK_PCIE_ROOT>, + <&cru ACLK_PHP_ROOT>; + #power-domain-cells = <0>; + }; + power-domain@RK3588_PD_SDIO { + reg = <RK3588_PD_SDIO>; + clocks = <&cru HCLK_SDIO>, + <&cru HCLK_NVM_ROOT>; + pm_qos = <&qos_sdio>; + #power-domain-cells = <0>; + }; + power-domain@RK3588_PD_AUDIO { + reg = <RK3588_PD_AUDIO>; + clocks = <&cru HCLK_AUDIO_ROOT>, + <&cru PCLK_AUDIO_ROOT>; + #power-domain-cells = <0>; + }; + power-domain@RK3588_PD_SDMMC { + reg = <RK3588_PD_SDMMC>; + pm_qos = <&qos_sdmmc>; + #power-domain-cells = <0>; + }; + }; + }; + + qos_gpu_m0: qos@fdf35000 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf35000 0x0 0x20>; + }; + + qos_gpu_m1: qos@fdf35200 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf35200 0x0 0x20>; + }; + + qos_gpu_m2: qos@fdf35400 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf35400 0x0 0x20>; + }; + + qos_gpu_m3: qos@fdf35600 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf35600 0x0 0x20>; + }; + + qos_rga3_1: qos@fdf36000 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf36000 0x0 0x20>; + }; + + qos_sdio: qos@fdf39000 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf39000 0x0 0x20>; + }; + + qos_sdmmc: qos@fdf3d800 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf3d800 0x0 0x20>; + }; + + qos_usb3_1: qos@fdf3e000 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf3e000 0x0 0x20>; + }; + + qos_usb3_0: qos@fdf3e200 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf3e200 0x0 0x20>; + }; + + qos_usb2host_0: qos@fdf3e400 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf3e400 0x0 0x20>; + }; + + qos_usb2host_1: qos@fdf3e600 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf3e600 0x0 0x20>; + }; + + qos_fisheye0: qos@fdf40000 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf40000 0x0 0x20>; + }; + + qos_fisheye1: qos@fdf40200 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf40200 0x0 0x20>; + }; + + qos_isp0_mro: qos@fdf40400 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf40400 0x0 0x20>; + }; + + qos_isp0_mwo: qos@fdf40500 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf40500 0x0 0x20>; + }; + + qos_vicap_m0: qos@fdf40600 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf40600 0x0 0x20>; + }; + + qos_vicap_m1: qos@fdf40800 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf40800 0x0 0x20>; + }; + + qos_isp1_mwo: qos@fdf41000 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf41000 0x0 0x20>; + }; + + qos_isp1_mro: qos@fdf41100 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf41100 0x0 0x20>; + }; + + qos_rkvenc0_m0ro: qos@fdf60000 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf60000 0x0 0x20>; + }; + + qos_rkvenc0_m1ro: qos@fdf60200 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf60200 0x0 0x20>; + }; + + qos_rkvenc0_m2wo: qos@fdf60400 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf60400 0x0 0x20>; + }; + + qos_rkvenc1_m0ro: qos@fdf61000 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf61000 0x0 0x20>; + }; + + qos_rkvenc1_m1ro: qos@fdf61200 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf61200 0x0 0x20>; + }; + + qos_rkvenc1_m2wo: qos@fdf61400 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf61400 0x0 0x20>; + }; + + qos_rkvdec0: qos@fdf62000 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf62000 0x0 0x20>; + }; + + qos_rkvdec1: qos@fdf63000 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf63000 0x0 0x20>; + }; + + qos_av1: qos@fdf64000 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf64000 0x0 0x20>; + }; + + qos_iep: qos@fdf66000 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf66000 0x0 0x20>; + }; + + qos_jpeg_dec: qos@fdf66200 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf66200 0x0 0x20>; + }; + + qos_jpeg_enc0: qos@fdf66400 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf66400 0x0 0x20>; + }; + + qos_jpeg_enc1: qos@fdf66600 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf66600 0x0 0x20>; + }; + + qos_jpeg_enc2: qos@fdf66800 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf66800 0x0 0x20>; + }; + + qos_jpeg_enc3: qos@fdf66a00 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf66a00 0x0 0x20>; + }; + + qos_rga2_mro: qos@fdf66c00 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf66c00 0x0 0x20>; + }; + + qos_rga2_mwo: qos@fdf66e00 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf66e00 0x0 0x20>; + }; + + qos_rga3_0: qos@fdf67000 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf67000 0x0 0x20>; + }; + + qos_vdpu: qos@fdf67200 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf67200 0x0 0x20>; + }; + + qos_npu1: qos@fdf70000 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf70000 0x0 0x20>; + }; + + qos_npu2: qos@fdf71000 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf71000 0x0 0x20>; + }; + + qos_npu0_mwr: qos@fdf72000 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf72000 0x0 0x20>; + }; + + qos_npu0_mro: qos@fdf72200 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf72200 0x0 0x20>; + }; + + qos_mcu_npu: qos@fdf72400 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf72400 0x0 0x20>; + }; + + qos_hdcp0: qos@fdf80000 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf80000 0x0 0x20>; + }; + + qos_hdcp1: qos@fdf81000 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf81000 0x0 0x20>; + }; + + qos_hdmirx: qos@fdf81200 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf81200 0x0 0x20>; + }; + + qos_vop_m0: qos@fdf82000 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf82000 0x0 0x20>; + }; + + qos_vop_m1: qos@fdf82200 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf82200 0x0 0x20>; + }; + + gmac1: ethernet@fe1c0000 { + compatible = "rockchip,rk3588-gmac", "snps,dwmac-4.20a"; + reg = <0x0 0xfe1c0000 0x0 0x10000>; + interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "macirq", "eth_wake_irq"; + clocks = <&cru CLK_GMAC_125M>, <&cru CLK_GMAC_50M>, + <&cru PCLK_GMAC1>, <&cru ACLK_GMAC1>, + <&cru CLK_GMAC1_PTP_REF>; + clock-names = "stmmaceth", "clk_mac_ref", + "pclk_mac", "aclk_mac", + "ptp_ref"; + power-domains = <&power RK3588_PD_GMAC>; + resets = <&cru SRST_A_GMAC1>; + reset-names = "stmmaceth"; + rockchip,grf = <&sys_grf>; + rockchip,php-grf = <&php_grf>; + snps,axi-config = <&gmac1_stmmac_axi_setup>; + snps,mixed-burst; + snps,mtl-rx-config = <&gmac1_mtl_rx_setup>; + snps,mtl-tx-config = <&gmac1_mtl_tx_setup>; + snps,tso; + status = "disabled"; + + mdio1: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <0x1>; + #size-cells = <0x0>; + }; + + gmac1_stmmac_axi_setup: stmmac-axi-config { + snps,blen = <0 0 0 0 16 8 4>; + snps,wr_osr_lmt = <4>; + snps,rd_osr_lmt = <8>; + }; + + gmac1_mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <2>; + queue0 {}; + queue1 {}; + }; + + gmac1_mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <2>; + queue0 {}; + queue1 {}; + }; + }; + + sdhci: mmc@fe2e0000 { + compatible = "rockchip,rk3588-dwcmshc"; + reg = <0x0 0xfe2e0000 0x0 0x10000>; + interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH 0>; + assigned-clocks = <&cru BCLK_EMMC>, <&cru TMCLK_EMMC>, <&cru CCLK_EMMC>; + assigned-clock-rates = <200000000>, <24000000>, <200000000>; + clocks = <&cru CCLK_EMMC>, <&cru HCLK_EMMC>, + <&cru ACLK_EMMC>, <&cru BCLK_EMMC>, + <&cru TMCLK_EMMC>; + clock-names = "core", "bus", "axi", "block", "timer"; + max-frequency = <200000000>; + resets = <&cru SRST_C_EMMC>, <&cru SRST_H_EMMC>, + <&cru SRST_A_EMMC>, <&cru SRST_B_EMMC>, + <&cru SRST_T_EMMC>; + reset-names = "core", "bus", "axi", "block", "timer"; + status = "disabled"; + }; + + gic: interrupt-controller@fe600000 { + compatible = "arm,gic-v3"; + reg = <0x0 0xfe600000 0 0x10000>, /* GICD */ + <0x0 0xfe680000 0 0x100000>; /* GICR */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-controller; + mbi-alias = <0x0 0xfe610000>; + mbi-ranges = <424 56>; + msi-controller; + #interrupt-cells = <4>; + + ppi-partitions { + ppi_partition0: interrupt-partition-0 { + affinity = <&cpu_l0 &cpu_l1 &cpu_l2 &cpu_l3>; + }; + + ppi_partition1: interrupt-partition-1 { + affinity = <&cpu_b0 &cpu_b1 &cpu_b2 &cpu_b3>; + }; + }; + }; + + dmac0: dma-controller@fea10000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0xfea10000 0x0 0x4000>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH 0>; + arm,pl330-periph-burst; + clocks = <&cru ACLK_DMAC0>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + }; + + dmac1: dma-controller@fea30000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0xfea30000 0x0 0x4000>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH 0>; + arm,pl330-periph-burst; + clocks = <&cru ACLK_DMAC1>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + }; + + i2c1: i2c@fea90000 { + compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c"; + reg = <0x0 0xfea90000 0x0 0x1000>; + clocks = <&cru CLK_I2C1>, <&cru PCLK_I2C1>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH 0>; + pinctrl-0 = <&i2c1m0_xfer>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@feaa0000 { + compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c"; + reg = <0x0 0xfeaa0000 0x0 0x1000>; + clocks = <&cru CLK_I2C2>, <&cru PCLK_I2C2>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH 0>; + pinctrl-0 = <&i2c2m0_xfer>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@feab0000 { + compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c"; + reg = <0x0 0xfeab0000 0x0 0x1000>; + clocks = <&cru CLK_I2C3>, <&cru PCLK_I2C3>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH 0>; + pinctrl-0 = <&i2c3m0_xfer>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@feac0000 { + compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c"; + reg = <0x0 0xfeac0000 0x0 0x1000>; + clocks = <&cru CLK_I2C4>, <&cru PCLK_I2C4>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH 0>; + pinctrl-0 = <&i2c4m0_xfer>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c@fead0000 { + compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c"; + reg = <0x0 0xfead0000 0x0 0x1000>; + clocks = <&cru CLK_I2C5>, <&cru PCLK_I2C5>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH 0>; + pinctrl-0 = <&i2c5m0_xfer>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi0: spi@feb00000 { + compatible = "rockchip,rk3588-spi", "rockchip,rk3066-spi"; + reg = <0x0 0xfeb00000 0x0 0x1000>; + interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru CLK_SPI0>, <&cru PCLK_SPI0>; + clock-names = "spiclk", "apb_pclk"; + dmas = <&dmac0 14>, <&dmac0 15>; + dma-names = "tx", "rx"; + num-cs = <2>; + pinctrl-0 = <&spi0m0_cs0 &spi0m0_cs1 &spi0m0_pins>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@feb10000 { + compatible = "rockchip,rk3588-spi", "rockchip,rk3066-spi"; + reg = <0x0 0xfeb10000 0x0 0x1000>; + interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru CLK_SPI1>, <&cru PCLK_SPI1>; + clock-names = "spiclk", "apb_pclk"; + dmas = <&dmac0 16>, <&dmac0 17>; + dma-names = "tx", "rx"; + num-cs = <2>; + pinctrl-0 = <&spi1m1_cs0 &spi1m1_cs1 &spi1m1_pins>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi2: spi@feb20000 { + compatible = "rockchip,rk3588-spi", "rockchip,rk3066-spi"; + reg = <0x0 0xfeb20000 0x0 0x1000>; + interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru CLK_SPI2>, <&cru PCLK_SPI2>; + clock-names = "spiclk", "apb_pclk"; + dmas = <&dmac1 15>, <&dmac1 16>; + dma-names = "tx", "rx"; + num-cs = <2>; + pinctrl-0 = <&spi2m2_cs0 &spi2m2_cs1 &spi2m2_pins>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi3: spi@feb30000 { + compatible = "rockchip,rk3588-spi", "rockchip,rk3066-spi"; + reg = <0x0 0xfeb30000 0x0 0x1000>; + interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru CLK_SPI3>, <&cru PCLK_SPI3>; + clock-names = "spiclk", "apb_pclk"; + dmas = <&dmac1 17>, <&dmac1 18>; + dma-names = "tx", "rx"; + num-cs = <2>; + pinctrl-0 = <&spi3m1_cs0 &spi3m1_cs1 &spi3m1_pins>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart1: serial@feb40000 { + compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart"; + reg = <0x0 0xfeb40000 0x0 0x100>; + interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac0 8>, <&dmac0 9>; + dma-names = "tx", "rx"; + pinctrl-0 = <&uart1m1_xfer>; + pinctrl-names = "default"; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + uart2: serial@feb50000 { + compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart"; + reg = <0x0 0xfeb50000 0x0 0x100>; + interrupts = <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac0 10>, <&dmac0 11>; + dma-names = "tx", "rx"; + pinctrl-0 = <&uart2m1_xfer>; + pinctrl-names = "default"; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + uart3: serial@feb60000 { + compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart"; + reg = <0x0 0xfeb60000 0x0 0x100>; + interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac0 12>, <&dmac0 13>; + dma-names = "tx", "rx"; + pinctrl-0 = <&uart3m1_xfer>; + pinctrl-names = "default"; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + uart4: serial@feb70000 { + compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart"; + reg = <0x0 0xfeb70000 0x0 0x100>; + interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac1 9>, <&dmac1 10>; + dma-names = "tx", "rx"; + pinctrl-0 = <&uart4m1_xfer>; + pinctrl-names = "default"; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + uart5: serial@feb80000 { + compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart"; + reg = <0x0 0xfeb80000 0x0 0x100>; + interrupts = <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru SCLK_UART5>, <&cru PCLK_UART5>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac1 11>, <&dmac1 12>; + dma-names = "tx", "rx"; + pinctrl-0 = <&uart5m1_xfer>; + pinctrl-names = "default"; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + uart6: serial@feb90000 { + compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart"; + reg = <0x0 0xfeb90000 0x0 0x100>; + interrupts = <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru SCLK_UART6>, <&cru PCLK_UART6>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac1 13>, <&dmac1 14>; + dma-names = "tx", "rx"; + pinctrl-0 = <&uart6m1_xfer>; + pinctrl-names = "default"; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + uart7: serial@feba0000 { + compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart"; + reg = <0x0 0xfeba0000 0x0 0x100>; + interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru SCLK_UART7>, <&cru PCLK_UART7>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac2 7>, <&dmac2 8>; + dma-names = "tx", "rx"; + pinctrl-0 = <&uart7m1_xfer>; + pinctrl-names = "default"; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + uart8: serial@febb0000 { + compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart"; + reg = <0x0 0xfebb0000 0x0 0x100>; + interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru SCLK_UART8>, <&cru PCLK_UART8>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac2 9>, <&dmac2 10>; + dma-names = "tx", "rx"; + pinctrl-0 = <&uart8m1_xfer>; + pinctrl-names = "default"; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + uart9: serial@febc0000 { + compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart"; + reg = <0x0 0xfebc0000 0x0 0x100>; + interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru SCLK_UART9>, <&cru PCLK_UART9>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac2 11>, <&dmac2 12>; + dma-names = "tx", "rx"; + pinctrl-0 = <&uart9m1_xfer>; + pinctrl-names = "default"; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + pwm4: pwm@febd0000 { + compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xfebd0000 0x0 0x10>; + clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>; + clock-names = "pwm", "pclk"; + pinctrl-0 = <&pwm4m0_pins>; + pinctrl-names = "default"; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm5: pwm@febd0010 { + compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xfebd0010 0x0 0x10>; + clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>; + clock-names = "pwm", "pclk"; + pinctrl-0 = <&pwm5m0_pins>; + pinctrl-names = "default"; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm6: pwm@febd0020 { + compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xfebd0020 0x0 0x10>; + clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>; + clock-names = "pwm", "pclk"; + pinctrl-0 = <&pwm6m0_pins>; + pinctrl-names = "default"; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm7: pwm@febd0030 { + compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xfebd0030 0x0 0x10>; + clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>; + clock-names = "pwm", "pclk"; + pinctrl-0 = <&pwm7m0_pins>; + pinctrl-names = "default"; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm8: pwm@febe0000 { + compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xfebe0000 0x0 0x10>; + clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>; + clock-names = "pwm", "pclk"; + pinctrl-0 = <&pwm8m0_pins>; + pinctrl-names = "default"; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm9: pwm@febe0010 { + compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xfebe0010 0x0 0x10>; + clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>; + clock-names = "pwm", "pclk"; + pinctrl-0 = <&pwm9m0_pins>; + pinctrl-names = "default"; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm10: pwm@febe0020 { + compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xfebe0020 0x0 0x10>; + clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>; + clock-names = "pwm", "pclk"; + pinctrl-0 = <&pwm10m0_pins>; + pinctrl-names = "default"; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm11: pwm@febe0030 { + compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xfebe0030 0x0 0x10>; + clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>; + clock-names = "pwm", "pclk"; + pinctrl-0 = <&pwm11m0_pins>; + pinctrl-names = "default"; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm12: pwm@febf0000 { + compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xfebf0000 0x0 0x10>; + clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>; + clock-names = "pwm", "pclk"; + pinctrl-0 = <&pwm12m0_pins>; + pinctrl-names = "default"; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm13: pwm@febf0010 { + compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xfebf0010 0x0 0x10>; + clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>; + clock-names = "pwm", "pclk"; + pinctrl-0 = <&pwm13m0_pins>; + pinctrl-names = "default"; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm14: pwm@febf0020 { + compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xfebf0020 0x0 0x10>; + clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>; + clock-names = "pwm", "pclk"; + pinctrl-0 = <&pwm14m0_pins>; + pinctrl-names = "default"; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm15: pwm@febf0030 { + compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xfebf0030 0x0 0x10>; + clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>; + clock-names = "pwm", "pclk"; + pinctrl-0 = <&pwm15m0_pins>; + pinctrl-names = "default"; + #pwm-cells = <3>; + status = "disabled"; + }; + + i2c6: i2c@fec80000 { + compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c"; + reg = <0x0 0xfec80000 0x0 0x1000>; + clocks = <&cru CLK_I2C6>, <&cru PCLK_I2C6>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH 0>; + pinctrl-0 = <&i2c6m0_xfer>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c7: i2c@fec90000 { + compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c"; + reg = <0x0 0xfec90000 0x0 0x1000>; + clocks = <&cru CLK_I2C7>, <&cru PCLK_I2C7>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH 0>; + pinctrl-0 = <&i2c7m0_xfer>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c8: i2c@feca0000 { + compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c"; + reg = <0x0 0xfeca0000 0x0 0x1000>; + clocks = <&cru CLK_I2C8>, <&cru PCLK_I2C8>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH 0>; + pinctrl-0 = <&i2c8m0_xfer>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi4: spi@fecb0000 { + compatible = "rockchip,rk3588-spi", "rockchip,rk3066-spi"; + reg = <0x0 0xfecb0000 0x0 0x1000>; + interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru CLK_SPI4>, <&cru PCLK_SPI4>; + clock-names = "spiclk", "apb_pclk"; + dmas = <&dmac2 13>, <&dmac2 14>; + dma-names = "tx", "rx"; + num-cs = <2>; + pinctrl-0 = <&spi4m0_cs0 &spi4m0_cs1 &spi4m0_pins>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + dmac2: dma-controller@fed10000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0xfed10000 0x0 0x4000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH 0>; + arm,pl330-periph-burst; + clocks = <&cru ACLK_DMAC2>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + }; + + system_sram2: sram@ff001000 { + compatible = "mmio-sram"; + reg = <0x0 0xff001000 0x0 0xef000>; + ranges = <0x0 0x0 0xff001000 0xef000>; + #address-cells = <1>; + #size-cells = <1>; + }; + + pinctrl: pinctrl { + compatible = "rockchip,rk3588-pinctrl"; + ranges; + rockchip,grf = <&ioc>; + #address-cells = <2>; + #size-cells = <2>; + + gpio0: gpio@fd8a0000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xfd8a0000 0x0 0x100>; + interrupts = <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru PCLK_GPIO0>, <&cru DBCLK_GPIO0>; + gpio-controller; + gpio-ranges = <&pinctrl 0 0 32>; + interrupt-controller; + #gpio-cells = <2>; + #interrupt-cells = <2>; + }; + + gpio1: gpio@fec20000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xfec20000 0x0 0x100>; + interrupts = <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru PCLK_GPIO1>, <&cru DBCLK_GPIO1>; + gpio-controller; + gpio-ranges = <&pinctrl 0 32 32>; + interrupt-controller; + #gpio-cells = <2>; + #interrupt-cells = <2>; + }; + + gpio2: gpio@fec30000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xfec30000 0x0 0x100>; + interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru PCLK_GPIO2>, <&cru DBCLK_GPIO2>; + gpio-controller; + gpio-ranges = <&pinctrl 0 64 32>; + interrupt-controller; + #gpio-cells = <2>; + #interrupt-cells = <2>; + }; + + gpio3: gpio@fec40000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xfec40000 0x0 0x100>; + interrupts = <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru PCLK_GPIO3>, <&cru DBCLK_GPIO3>; + gpio-controller; + gpio-ranges = <&pinctrl 0 96 32>; + interrupt-controller; + #gpio-cells = <2>; + #interrupt-cells = <2>; + }; + + gpio4: gpio@fec50000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xfec50000 0x0 0x100>; + interrupts = <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru PCLK_GPIO4>, <&cru DBCLK_GPIO4>; + gpio-controller; + gpio-ranges = <&pinctrl 0 128 32>; + interrupt-controller; + #gpio-cells = <2>; + #interrupt-cells = <2>; + }; + }; +}; + +#include "rk3588s-pinctrl.dtsi" diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi index 1c76b4375b2e..7bb36b071475 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi @@ -313,12 +313,12 @@ }; }; - adamv@57920000 { + syscon@57920000 { compatible = "socionext,uniphier-ld11-adamv", "simple-mfd", "syscon"; reg = <0x57920000 0x1000>; - adamv_rst: reset { + adamv_rst: reset-controller { compatible = "socionext,uniphier-ld11-adamv-reset"; #reset-cells = <1>; }; @@ -417,28 +417,28 @@ reg = <0x59801000 0x400>; }; - sdctrl@59810000 { + syscon@59810000 { compatible = "socionext,uniphier-ld11-sdctrl", "simple-mfd", "syscon"; reg = <0x59810000 0x400>; - sd_rst: reset { + sd_rst: reset-controller { compatible = "socionext,uniphier-ld11-sd-reset"; #reset-cells = <1>; }; }; - perictrl@59820000 { + syscon@59820000 { compatible = "socionext,uniphier-ld11-perictrl", "simple-mfd", "syscon"; reg = <0x59820000 0x200>; - peri_clk: clock { + peri_clk: clock-controller { compatible = "socionext,uniphier-ld11-peri-clock"; #clock-cells = <1>; }; - peri_rst: reset { + peri_rst: reset-controller { compatible = "socionext,uniphier-ld11-peri-reset"; #reset-cells = <1>; }; @@ -511,24 +511,24 @@ has-transaction-translator; }; - mioctrl@5b3e0000 { + syscon@5b3e0000 { compatible = "socionext,uniphier-ld11-mioctrl", "simple-mfd", "syscon"; reg = <0x5b3e0000 0x800>; - mio_clk: clock { + mio_clk: clock-controller { compatible = "socionext,uniphier-ld11-mio-clock"; #clock-cells = <1>; }; - mio_rst: reset { + mio_rst: reset-controller { compatible = "socionext,uniphier-ld11-mio-reset"; #reset-cells = <1>; resets = <&sys_rst 7>; }; }; - soc_glue: soc-glue@5f800000 { + soc_glue: syscon@5f800000 { compatible = "socionext,uniphier-ld11-soc-glue", "simple-mfd", "syscon"; reg = <0x5f800000 0x2000>; @@ -537,7 +537,7 @@ compatible = "socionext,uniphier-ld11-pinctrl"; }; - usb-controller { + usb-hub { compatible = "socionext,uniphier-ld11-usb2-phy"; #address-cells = <1>; #size-cells = <0>; @@ -559,9 +559,10 @@ }; }; - soc-glue@5f900000 { + syscon@5f900000 { compatible = "socionext,uniphier-ld11-soc-glue-debug", - "simple-mfd"; + "simple-mfd", "syscon"; + reg = <0x5f900000 0x2000>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x5f900000 0x2000>; @@ -601,17 +602,17 @@ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; }; - sysctrl@61840000 { + syscon@61840000 { compatible = "socionext,uniphier-ld11-sysctrl", "simple-mfd", "syscon"; reg = <0x61840000 0x10000>; - sys_clk: clock { + sys_clk: clock-controller { compatible = "socionext,uniphier-ld11-clock"; #clock-cells = <1>; }; - sys_rst: reset { + sys_rst: reset-controller { compatible = "socionext,uniphier-ld11-reset"; #reset-cells = <1>; }; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi index 9308458f9611..4e2171630272 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi @@ -444,12 +444,12 @@ }; }; - adamv@57920000 { + syscon@57920000 { compatible = "socionext,uniphier-ld20-adamv", "simple-mfd", "syscon"; reg = <0x57920000 0x1000>; - adamv_rst: reset { + adamv_rst: reset-controller { compatible = "socionext,uniphier-ld20-adamv-reset"; #reset-cells = <1>; }; @@ -548,33 +548,33 @@ reg = <0x59801000 0x400>; }; - sdctrl@59810000 { + sdctrl: syscon@59810000 { compatible = "socionext,uniphier-ld20-sdctrl", "simple-mfd", "syscon"; reg = <0x59810000 0x400>; - sd_clk: clock { + sd_clk: clock-controller { compatible = "socionext,uniphier-ld20-sd-clock"; #clock-cells = <1>; }; - sd_rst: reset { + sd_rst: reset-controller { compatible = "socionext,uniphier-ld20-sd-reset"; #reset-cells = <1>; }; }; - perictrl@59820000 { + syscon@59820000 { compatible = "socionext,uniphier-ld20-perictrl", "simple-mfd", "syscon"; reg = <0x59820000 0x200>; - peri_clk: clock { + peri_clk: clock-controller { compatible = "socionext,uniphier-ld20-peri-clock"; #clock-cells = <1>; }; - peri_rst: reset { + peri_rst: reset-controller { compatible = "socionext,uniphier-ld20-peri-reset"; #reset-cells = <1>; }; @@ -611,9 +611,10 @@ resets = <&sd_rst 0>; bus-width = <4>; cap-sd-highspeed; + socionext,syscon-uhs-mode = <&sdctrl 0>; }; - soc_glue: soc-glue@5f800000 { + soc_glue: syscon@5f800000 { compatible = "socionext,uniphier-ld20-soc-glue", "simple-mfd", "syscon"; reg = <0x5f800000 0x2000>; @@ -623,9 +624,10 @@ }; }; - soc-glue@5f900000 { + syscon@5f900000 { compatible = "socionext,uniphier-ld20-soc-glue-debug", - "simple-mfd"; + "simple-mfd", "syscon"; + reg = <0x5f900000 0x2000>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x5f900000 0x2000>; @@ -709,17 +711,17 @@ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; }; - sysctrl@61840000 { + syscon@61840000 { compatible = "socionext,uniphier-ld20-sysctrl", "simple-mfd", "syscon"; reg = <0x61840000 0x10000>; - sys_clk: clock { + sys_clk: clock-controller { compatible = "socionext,uniphier-ld20-clock"; #clock-cells = <1>; }; - sys_rst: reset { + sys_rst: reset-controller { compatible = "socionext,uniphier-ld20-reset"; #reset-cells = <1>; }; @@ -778,11 +780,12 @@ usb-controller@65b00000 { compatible = "socionext,uniphier-ld20-dwc3-glue", "simple-mfd"; + reg = <0x65b00000 0x400>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x65b00000 0x400>; - usb_rst: reset@0 { + usb_rst: reset-controller@0 { compatible = "socionext,uniphier-ld20-usb3-reset"; reg = <0x0 0x4>; #reset-cells = <1>; @@ -828,7 +831,7 @@ resets = <&sys_rst 14>; }; - usb_hsphy0: hs-phy@200 { + usb_hsphy0: phy@200 { compatible = "socionext,uniphier-ld20-usb3-hsphy"; reg = <0x200 0x10>; #phy-cells = <0>; @@ -842,7 +845,7 @@ <&usb_hs_i0>; }; - usb_hsphy1: hs-phy@210 { + usb_hsphy1: phy@210 { compatible = "socionext,uniphier-ld20-usb3-hsphy"; reg = <0x210 0x10>; #phy-cells = <0>; @@ -856,7 +859,7 @@ <&usb_hs_i0>; }; - usb_hsphy2: hs-phy@220 { + usb_hsphy2: phy@220 { compatible = "socionext,uniphier-ld20-usb3-hsphy"; reg = <0x220 0x10>; #phy-cells = <0>; @@ -870,7 +873,7 @@ <&usb_hs_i2>; }; - usb_hsphy3: hs-phy@230 { + usb_hsphy3: phy@230 { compatible = "socionext,uniphier-ld20-usb3-hsphy"; reg = <0x230 0x10>; #phy-cells = <0>; @@ -884,7 +887,7 @@ <&usb_hs_i2>; }; - usb_ssphy0: ss-phy@300 { + usb_ssphy0: phy@300 { compatible = "socionext,uniphier-ld20-usb3-ssphy"; reg = <0x300 0x10>; #phy-cells = <0>; @@ -895,7 +898,7 @@ vbus-supply = <&usb_vbus0>; }; - usb_ssphy1: ss-phy@310 { + usb_ssphy1: phy@310 { compatible = "socionext,uniphier-ld20-usb3-ssphy"; reg = <0x310 0x10>; #phy-cells = <0>; diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref-gadget0.dts b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref-gadget0.dts index 7069f51bc120..99136adb1857 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref-gadget0.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref-gadget0.dts @@ -24,7 +24,7 @@ snps,dis_enblslpm_quirk; snps,dis_u2_susphy_quirk; snps,dis_u3_susphy_quirk; - snps,usb2_gadget_lpm_disable; + snps,usb2-gadget-lpm-disable; phy-names = "usb2-phy", "usb3-phy"; phys = <&usb0_hsphy0>, <&usb0_ssphy0>; }; diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref-gadget1.dts b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref-gadget1.dts index a3cfa8113ffb..4c960f455461 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref-gadget1.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref-gadget1.dts @@ -24,7 +24,7 @@ snps,dis_enblslpm_quirk; snps,dis_u2_susphy_quirk; snps,dis_u3_susphy_quirk; - snps,usb2_gadget_lpm_disable; + snps,usb2-gadget-lpm-disable; phy-names = "usb2-phy", "usb3-phy"; phys = <&usb1_hsphy0>, <&usb1_ssphy0>; }; diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi index b0c29510a7da..38ccfb46ea42 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi @@ -370,33 +370,33 @@ reg = <0x59801000 0x400>; }; - sdctrl@59810000 { + sdctrl: syscon@59810000 { compatible = "socionext,uniphier-pxs3-sdctrl", "simple-mfd", "syscon"; reg = <0x59810000 0x400>; - sd_clk: clock { + sd_clk: clock-controller { compatible = "socionext,uniphier-pxs3-sd-clock"; #clock-cells = <1>; }; - sd_rst: reset { + sd_rst: reset-controller { compatible = "socionext,uniphier-pxs3-sd-reset"; #reset-cells = <1>; }; }; - perictrl@59820000 { + syscon@59820000 { compatible = "socionext,uniphier-pxs3-perictrl", "simple-mfd", "syscon"; reg = <0x59820000 0x200>; - peri_clk: clock { + peri_clk: clock-controller { compatible = "socionext,uniphier-pxs3-peri-clock"; #clock-cells = <1>; }; - peri_rst: reset { + peri_rst: reset-controller { compatible = "socionext,uniphier-pxs3-peri-reset"; #reset-cells = <1>; }; @@ -437,9 +437,10 @@ sd-uhs-sdr12; sd-uhs-sdr25; sd-uhs-sdr50; + socionext,syscon-uhs-mode = <&sdctrl 0>; }; - soc_glue: soc-glue@5f800000 { + soc_glue: syscon@5f800000 { compatible = "socionext,uniphier-pxs3-soc-glue", "simple-mfd", "syscon"; reg = <0x5f800000 0x2000>; @@ -449,9 +450,10 @@ }; }; - soc-glue@5f900000 { + syscon@5f900000 { compatible = "socionext,uniphier-pxs3-soc-glue-debug", - "simple-mfd"; + "simple-mfd", "syscon"; + reg = <0x5f900000 0x2000>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x5f900000 0x2000>; @@ -535,17 +537,17 @@ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; }; - sysctrl@61840000 { + syscon@61840000 { compatible = "socionext,uniphier-pxs3-sysctrl", "simple-mfd", "syscon"; reg = <0x61840000 0x10000>; - sys_clk: clock { + sys_clk: clock-controller { compatible = "socionext,uniphier-pxs3-clock"; #clock-cells = <1>; }; - sys_rst: reset { + sys_rst: reset-controller { compatible = "socionext,uniphier-pxs3-reset"; #reset-cells = <1>; }; @@ -619,6 +621,7 @@ sata-controller@65700000 { compatible = "socionext,uniphier-pxs3-ahci-glue", "simple-mfd"; + reg = <0x65700000 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x65700000 0x100>; @@ -659,6 +662,7 @@ sata-controller@65900000 { compatible = "socionext,uniphier-pxs3-ahci-glue", "simple-mfd"; + reg = <0x65900000 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x65900000 0x100>; @@ -703,11 +707,12 @@ usb-controller@65b00000 { compatible = "socionext,uniphier-pxs3-dwc3-glue", "simple-mfd"; + reg = <0x65b00000 0x400>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x65b00000 0x400>; - usb0_rst: reset@0 { + usb0_rst: reset-controller@0 { compatible = "socionext,uniphier-pxs3-usb3-reset"; reg = <0x0 0x4>; #reset-cells = <1>; @@ -735,7 +740,7 @@ resets = <&sys_rst 12>; }; - usb0_hsphy0: hs-phy@200 { + usb0_hsphy0: phy@200 { compatible = "socionext,uniphier-pxs3-usb3-hsphy"; reg = <0x200 0x10>; #phy-cells = <0>; @@ -749,7 +754,7 @@ <&usb_hs_i0>; }; - usb0_hsphy1: hs-phy@210 { + usb0_hsphy1: phy@210 { compatible = "socionext,uniphier-pxs3-usb3-hsphy"; reg = <0x210 0x10>; #phy-cells = <0>; @@ -763,7 +768,7 @@ <&usb_hs_i0>; }; - usb0_ssphy0: ss-phy@300 { + usb0_ssphy0: phy@300 { compatible = "socionext,uniphier-pxs3-usb3-ssphy"; reg = <0x300 0x10>; #phy-cells = <0>; @@ -774,7 +779,7 @@ vbus-supply = <&usb0_vbus0>; }; - usb0_ssphy1: ss-phy@310 { + usb0_ssphy1: phy@310 { compatible = "socionext,uniphier-pxs3-usb3-ssphy"; reg = <0x310 0x10>; #phy-cells = <0>; @@ -805,11 +810,12 @@ usb-controller@65d00000 { compatible = "socionext,uniphier-pxs3-dwc3-glue", "simple-mfd"; + reg = <0x65d00000 0x400>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x65d00000 0x400>; - usb1_rst: reset@0 { + usb1_rst: reset-controller@0 { compatible = "socionext,uniphier-pxs3-usb3-reset"; reg = <0x0 0x4>; #reset-cells = <1>; @@ -837,7 +843,7 @@ resets = <&sys_rst 13>; }; - usb1_hsphy0: hs-phy@200 { + usb1_hsphy0: phy@200 { compatible = "socionext,uniphier-pxs3-usb3-hsphy"; reg = <0x200 0x10>; #phy-cells = <0>; @@ -852,7 +858,7 @@ <&usb_hs_i2>; }; - usb1_hsphy1: hs-phy@210 { + usb1_hsphy1: phy@210 { compatible = "socionext,uniphier-pxs3-usb3-hsphy"; reg = <0x210 0x10>; #phy-cells = <0>; @@ -867,7 +873,7 @@ <&usb_hs_i2>; }; - usb1_ssphy0: ss-phy@300 { + usb1_ssphy0: phy@300 { compatible = "socionext,uniphier-pxs3-usb3-ssphy"; reg = <0x300 0x10>; #phy-cells = <0>; diff --git a/arch/arm64/boot/dts/synaptics/berlin4ct.dtsi b/arch/arm64/boot/dts/synaptics/berlin4ct.dtsi index 0949acee4728..dc12350b9fc8 100644 --- a/arch/arm64/boot/dts/synaptics/berlin4ct.dtsi +++ b/arch/arm64/boot/dts/synaptics/berlin4ct.dtsi @@ -289,7 +289,7 @@ }; }; - uart0: uart@d000 { + uart0: serial@d000 { compatible = "snps,dw-apb-uart"; reg = <0xd000 0x100>; interrupts = <8>; diff --git a/arch/arm64/boot/dts/tesla/fsd-evb.dts b/arch/arm64/boot/dts/tesla/fsd-evb.dts index 1db6ddf03f01..8d7794642900 100644 --- a/arch/arm64/boot/dts/tesla/fsd-evb.dts +++ b/arch/arm64/boot/dts/tesla/fsd-evb.dts @@ -10,6 +10,7 @@ /dts-v1/; #include "fsd.dtsi" +#include <dt-bindings/gpio/gpio.h> / { model = "Tesla Full Self-Driving (FSD) Evaluation board"; @@ -28,12 +29,80 @@ device_type = "memory"; reg = <0x0 0x80000000 0x2 0x00000000>; }; + + sound { + compatible = "simple-audio-card"; + + #address-cells = <1>; + #size-cells = <0>; + + simple-audio-card,name = "FSD Audio Card"; + simple-audio-card,widgets = "Line", "Line Out", + "Line", "Line In"; + simple-audio-card,routing = "Line Out", "LLOUT", + "Line Out", "RLOUT", + "MIC2L", "Line In", + "MIC2R", "Line In"; + + simple-audio-card,dai-link@0 { + reg = <0>; + format = "i2s"; + bitclock-master = <&tlv320aic3x>; + frame-master = <&tlv320aic3x>; + + cpu-0 { + sound-dai = <&i2s_0 0>; + }; + cpu-1 { + sound-dai = <&i2s_0 1>; + }; + codec { + sound-dai = <&tlv320aic3x>; + system-clock-frequency = <33000000>; + }; + }; + }; }; &fin_pll { clock-frequency = <24000000>; }; +&hsi2c_5 { + status = "okay"; + + tlv320aic3x: codec@18 { + compatible = "ti,tlv320aic3104"; + reg = <0x18>; + #sound-dai-cells = <0>; + reset-gpios = <&gpg1 6 GPIO_ACTIVE_LOW>; + }; +}; + +&i2s_0 { + status = "okay"; +}; + +&i2s_1 { + status = "okay"; +}; + +&m_can0 { + status = "okay"; +}; + +&m_can1 { + status = "okay"; +}; + +&m_can2 { + status = "okay"; +}; + +&m_can3 { + status = "okay"; +}; + &serial_0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi b/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi index e3852c946352..3f898cf4874c 100644 --- a/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi +++ b/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi @@ -54,14 +54,14 @@ ufs_rst_n: ufs-rst-n-pins { samsung,pins = "gpf5-0"; samsung,pin-function = <FSD_PIN_FUNC_2>; - samsung,pin-pud = <FSD_PIN_PULL_NONE>; + samsung,pin-pud = <FSD_PIN_PULL_DOWN>; samsung,pin-drv = <FSD_PIN_DRV_LV4>; }; ufs_refclk_out: ufs-refclk-out-pins { samsung,pins = "gpf5-1"; samsung,pin-function = <FSD_PIN_FUNC_2>; - samsung,pin-pud = <FSD_PIN_PULL_NONE>; + samsung,pin-pud = <FSD_PIN_PULL_UP>; samsung,pin-drv = <FSD_PIN_DRV_LV4>; }; }; @@ -308,37 +308,79 @@ uart0_data: uart0-data-pins { samsung,pins = "gpb7-0", "gpb7-1"; samsung,pin-function = <FSD_PIN_FUNC_2>; - samsung,pin-pud = <FSD_PIN_PULL_NONE>; + samsung,pin-pud = <FSD_PIN_PULL_UP>; samsung,pin-drv = <FSD_PIN_DRV_LV4>; }; uart1_data: uart1-data-pins { samsung,pins = "gpb7-4", "gpb7-5"; samsung,pin-function = <FSD_PIN_FUNC_2>; - samsung,pin-pud = <FSD_PIN_PULL_NONE>; + samsung,pin-pud = <FSD_PIN_PULL_UP>; samsung,pin-drv = <FSD_PIN_DRV_LV4>; }; spi0_bus: spi0-bus-pins { samsung,pins = "gpb4-0", "gpb4-2", "gpb4-3"; samsung,pin-function = <FSD_PIN_FUNC_2>; - samsung,pin-pud = <FSD_PIN_PULL_UP>; + samsung,pin-pud = <FSD_PIN_PULL_DOWN>; samsung,pin-drv = <FSD_PIN_DRV_LV4>; }; spi1_bus: spi1-bus-pins { samsung,pins = "gpb4-4", "gpb4-6", "gpb4-7"; samsung,pin-function = <FSD_PIN_FUNC_2>; - samsung,pin-pud = <FSD_PIN_PULL_UP>; + samsung,pin-pud = <FSD_PIN_PULL_DOWN>; samsung,pin-drv = <FSD_PIN_DRV_LV4>; }; spi2_bus: spi2-bus-pins { samsung,pins = "gpb5-0", "gpb5-2", "gpb5-3"; samsung,pin-function = <FSD_PIN_FUNC_2>; + samsung,pin-pud = <FSD_PIN_PULL_DOWN>; + samsung,pin-drv = <FSD_PIN_DRV_LV4>; + }; + + m_can0_bus: m-can0-bus-pins { + samsung,pins = "gpd0-0", "gpd0-1"; + samsung,pin-function = <FSD_PIN_FUNC_2>; + samsung,pin-pud = <FSD_PIN_PULL_UP>; + samsung,pin-drv = <FSD_PIN_DRV_LV4>; + }; + + m_can1_bus: m-can1-bus-pins { + samsung,pins = "gpd0-2", "gpd0-3"; + samsung,pin-function = <FSD_PIN_FUNC_2>; + samsung,pin-pud = <FSD_PIN_PULL_UP>; + samsung,pin-drv = <FSD_PIN_DRV_LV4>; + }; + + m_can2_bus: m-can2-bus-pins { + samsung,pins = "gpd0-4", "gpd0-5"; + samsung,pin-function = <FSD_PIN_FUNC_2>; + samsung,pin-pud = <FSD_PIN_PULL_UP>; + samsung,pin-drv = <FSD_PIN_DRV_LV4>; + }; + + m_can3_bus: m-can3-bus-pins { + samsung,pins = "gpd0-6", "gpd0-7"; + samsung,pin-function = <FSD_PIN_FUNC_2>; samsung,pin-pud = <FSD_PIN_PULL_UP>; samsung,pin-drv = <FSD_PIN_DRV_LV4>; }; + + i2s0_bus: i2s0-bus-pins { + samsung,pins = "gpd1-0", "gpd1-1", "gpd1-2", "gpd1-3", "gpd1-4"; + samsung,pin-function = <FSD_PIN_FUNC_2>; + samsung,pin-pud = <FSD_PIN_PULL_DOWN>; + samsung,pin-drv = <FSD_PIN_DRV_LV4>; + }; + + i2s1_bus: i2s1-bus-pins { + samsung,pins = "gpd2-0", "gpd2-1", "gpd2-2", "gpd2-3", "gpd2-4"; + samsung,pin-function = <FSD_PIN_FUNC_2>; + samsung,pin-pud = <FSD_PIN_PULL_DOWN>; + samsung,pin-drv = <FSD_PIN_DRV_LV4>; + }; }; &pinctrl_pmu { diff --git a/arch/arm64/boot/dts/tesla/fsd.dtsi b/arch/arm64/boot/dts/tesla/fsd.dtsi index f35bc5a288c2..1c53c68efd53 100644 --- a/arch/arm64/boot/dts/tesla/fsd.dtsi +++ b/arch/arm64/boot/dts/tesla/fsd.dtsi @@ -281,6 +281,8 @@ cpucl_l2: l2-cache0 { compatible = "cache"; + cache-level = <2>; + cache-unified; cache-size = <0x400000>; cache-line-size = <64>; cache-sets = <4096>; @@ -466,6 +468,11 @@ clock-names = "fin_pll"; }; + sysreg_cam: system-controller@12630000 { + compatible = "tesla,fsd-cam-sysreg", "syscon"; + reg = <0x0 0x12630000 0x0 0x500>; + }; + clock_mfc: clock-controller@12810000 { compatible = "tesla,fsd-clock-mfc"; reg = <0x0 0x12810000 0x0 0x3000>; @@ -492,6 +499,11 @@ "dout_cmu_peric_shared1div4_dmaclk"; }; + sysreg_peric: system-controller@14030000 { + compatible = "tesla,fsd-peric-sysreg", "syscon"; + reg = <0x0 0x14030000 0x0 0x1000>; + }; + clock_fsys0: clock-controller@15010000 { compatible = "tesla,fsd-clock-fsys0"; reg = <0x0 0x15010000 0x0 0x3000>; @@ -506,6 +518,11 @@ "dout_cmu_fsys0_shared0div4"; }; + sysreg_fsys0: system-controller@15030000 { + compatible = "tesla,fsd-fsys0-sysreg", "syscon"; + reg = <0x0 0x15030000 0x0 0x1000>; + }; + clock_fsys1: clock-controller@16810000 { compatible = "tesla,fsd-clock-fsys1"; reg = <0x0 0x16810000 0x0 0x3000>; @@ -518,6 +535,11 @@ "dout_cmu_fsys1_shared0div4"; }; + sysreg_fsys1: system-controller@16830000 { + compatible = "tesla,fsd-fsys1-sysreg", "syscon"; + reg = <0x0 0x16830000 0x0 0x1000>; + }; + mdma0: dma-controller@10100000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x0 0x10100000 0x0 0x1000>; @@ -738,6 +760,40 @@ status = "disabled"; }; + i2s_0: i2s@140e0000 { + compatible = "tesla,fsd-i2s"; + reg = <0x0 0x140e0000 0x0 0x100>; + interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&pdma1 14>, <&pdma1 13>, <&pdma1 12>; + dma-names = "tx", "rx", "tx-sec"; + #clock-cells = <1>; + clocks = <&clock_peric PERIC_PCLK_TDM0>, + <&clock_peric PERIC_HCLK_TDM0>, + <&clock_peric PERIC_HCLK_TDM0>; + clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_bus>; + #sound-dai-cells = <1>; + status = "disabled"; + }; + + i2s_1: i2s@140f0000 { + compatible = "tesla,fsd-i2s"; + reg = <0x0 0x140f0000 0x0 0x100>; + interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&pdma1 17>, <&pdma1 16>, <&pdma1 15>; + dma-names = "tx", "rx", "tx-sec"; + #clock-cells = <1>; + clocks = <&clock_peric PERIC_PCLK_TDM1>, + <&clock_peric PERIC_HCLK_TDM1>, + <&clock_peric PERIC_HCLK_TDM1>; + clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; + pinctrl-names = "default"; + pinctrl-0 = <&i2s1_bus>; + #sound-dai-cells = <1>; + status = "disabled"; + }; + pinctrl_pmu: pinctrl@114f0000 { compatible = "tesla,fsd-pinctrl"; reg = <0x0 0x114f0000 0x0 0x1000>; @@ -755,6 +811,74 @@ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; }; + m_can0: can@14088000 { + compatible = "bosch,m_can"; + reg = <0x0 0x14088000 0x0 0x0200>, + <0x0 0x14080000 0x0 0x8000>; + reg-names = "m_can", "message_ram"; + interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + pinctrl-names = "default"; + pinctrl-0 = <&m_can0_bus>; + clocks = <&clock_peric PERIC_MCAN0_IPCLKPORT_PCLK>, + <&clock_peric PERIC_MCAN0_IPCLKPORT_CCLK>; + clock-names = "hclk", "cclk"; + bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; + status = "disabled"; + }; + + m_can1: can@14098000 { + compatible = "bosch,m_can"; + reg = <0x0 0x14098000 0x0 0x0200>, + <0x0 0x14090000 0x0 0x8000>; + reg-names = "m_can", "message_ram"; + interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + pinctrl-names = "default"; + pinctrl-0 = <&m_can1_bus>; + clocks = <&clock_peric PERIC_MCAN1_IPCLKPORT_PCLK>, + <&clock_peric PERIC_MCAN1_IPCLKPORT_CCLK>; + clock-names = "hclk", "cclk"; + bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; + status = "disabled"; + }; + + m_can2: can@140a8000 { + compatible = "bosch,m_can"; + reg = <0x0 0x140a8000 0x0 0x0200>, + <0x0 0x140a0000 0x0 0x8000>; + reg-names = "m_can", "message_ram"; + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + pinctrl-names = "default"; + pinctrl-0 = <&m_can2_bus>; + clocks = <&clock_peric PERIC_MCAN2_IPCLKPORT_PCLK>, + <&clock_peric PERIC_MCAN2_IPCLKPORT_CCLK>; + clock-names = "hclk", "cclk"; + bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; + status = "disabled"; + }; + + m_can3: can@140b8000 { + compatible = "bosch,m_can"; + reg = <0x0 0x140b8000 0x0 0x0200>, + <0x0 0x140b0000 0x0 0x8000>; + reg-names = "m_can", "message_ram"; + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + pinctrl-names = "default"; + pinctrl-0 = <&m_can3_bus>; + clocks = <&clock_peric PERIC_MCAN3_IPCLKPORT_PCLK>, + <&clock_peric PERIC_MCAN3_IPCLKPORT_CCLK>; + clock-names = "hclk", "cclk"; + bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; + status = "disabled"; + }; + spi_0: spi@14140000 { compatible = "tesla,fsd-spi"; reg = <0x0 0x14140000 0x0 0x100>; diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile index cf7c509538a4..6acd12409d59 100644 --- a/arch/arm64/boot/dts/ti/Makefile +++ b/arch/arm64/boot/dts/ti/Makefile @@ -5,24 +5,43 @@ # # Copyright (C) 2016-2021 Texas Instruments Incorporated - https://www.ti.com/ # +# Entries are grouped as per SoC present on the board. Groups are sorted +# alphabetically. -dtb-$(CONFIG_ARCH_K3) += k3-am654-base-board.dtb +# Boards with AM62x SoC +dtb-$(CONFIG_ARCH_K3) += k3-am625-sk.dtb + +# Boards with AM62Ax SoC +dtb-$(CONFIG_ARCH_K3) += k3-am62a7-sk.dtb + +# Boards with AM64x SoC +dtb-$(CONFIG_ARCH_K3) += k3-am642-evm.dtb +dtb-$(CONFIG_ARCH_K3) += k3-am642-phyboard-electra-rdk.dtb +dtb-$(CONFIG_ARCH_K3) += k3-am642-sk.dtb + +# Boards with AM65x SoC dtb-$(CONFIG_ARCH_K3) += k3-am6528-iot2050-basic.dtb dtb-$(CONFIG_ARCH_K3) += k3-am6528-iot2050-basic-pg2.dtb dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced.dtb +dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-m2.dtb dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-pg2.dtb +dtb-$(CONFIG_ARCH_K3) += k3-am654-base-board.dtb +# Boards with J7200 SoC +dtb-$(CONFIG_ARCH_K3) += k3-j7200-common-proc-board.dtb + +# Boards with J721e SoC dtb-$(CONFIG_ARCH_K3) += k3-j721e-beagleboneai64.dtb dtb-$(CONFIG_ARCH_K3) += k3-j721e-common-proc-board.dtb dtb-$(CONFIG_ARCH_K3) += k3-j721e-sk.dtb -dtb-$(CONFIG_ARCH_K3) += k3-j7200-common-proc-board.dtb - +# Boards with J721s2 SoC +dtb-$(CONFIG_ARCH_K3) += k3-am68-sk-base-board.dtb dtb-$(CONFIG_ARCH_K3) += k3-j721s2-common-proc-board.dtb -dtb-$(CONFIG_ARCH_K3) += k3-am642-evm.dtb -dtb-$(CONFIG_ARCH_K3) += k3-am642-sk.dtb - -dtb-$(CONFIG_ARCH_K3) += k3-am625-sk.dtb +# Boards with J784s4 SoC +dtb-$(CONFIG_ARCH_K3) += k3-am69-sk.dtb +dtb-$(CONFIG_ARCH_K3) += k3-j784s4-evm.dtb -dtb-$(CONFIG_ARCH_K3) += k3-am62a7-sk.dtb +# Enable support for device-tree overlays +DTC_FLAGS_k3-am6548-iot2050-advanced-m2 += -@ diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi index 072903649d6e..ea683fd77d6a 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi @@ -413,7 +413,7 @@ #address-cells = <1>; #size-cells = <0>; power-domains = <&k3_pds 141 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 172 0>; + clocks = <&k3_clks 141 0>; status = "disabled"; }; @@ -424,7 +424,7 @@ #address-cells = <1>; #size-cells = <0>; power-domains = <&k3_pds 142 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 173 0>; + clocks = <&k3_clks 142 0>; status = "disabled"; }; @@ -435,7 +435,7 @@ #address-cells = <1>; #size-cells = <0>; power-domains = <&k3_pds 143 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 174 0>; + clocks = <&k3_clks 143 0>; status = "disabled"; }; @@ -501,8 +501,10 @@ ti,clkbuf-sel = <0x7>; ti,otap-del-sel-legacy = <0x0>; ti,otap-del-sel-mmc-hs = <0x0>; - ti,otap-del-sel-ddr52 = <0x9>; - ti,otap-del-sel-hs200 = <0x6>; + ti,otap-del-sel-ddr52 = <0x5>; + ti,otap-del-sel-hs200 = <0x5>; + ti,itap-del-sel-legacy = <0xa>; + ti,itap-del-sel-mmc-hs = <0x1>; status = "disabled"; }; @@ -514,17 +516,17 @@ clocks = <&k3_clks 58 5>, <&k3_clks 58 6>; clock-names = "clk_ahb", "clk_xin"; ti,trm-icp = <0x2>; - ti,otap-del-sel-legacy = <0x0>; + ti,otap-del-sel-legacy = <0x8>; ti,otap-del-sel-sd-hs = <0x0>; - ti,otap-del-sel-sdr12 = <0xf>; - ti,otap-del-sel-sdr25 = <0xf>; - ti,otap-del-sel-sdr50 = <0xc>; - ti,otap-del-sel-sdr104 = <0x6>; - ti,otap-del-sel-ddr50 = <0x9>; - ti,itap-del-sel-legacy = <0x0>; - ti,itap-del-sel-sd-hs = <0x0>; - ti,itap-del-sel-sdr12 = <0x0>; - ti,itap-del-sel-sdr25 = <0x0>; + ti,otap-del-sel-sdr12 = <0x0>; + ti,otap-del-sel-sdr25 = <0x0>; + ti,otap-del-sel-sdr50 = <0x8>; + ti,otap-del-sel-sdr104 = <0x7>; + ti,otap-del-sel-ddr50 = <0x4>; + ti,itap-del-sel-legacy = <0xa>; + ti,itap-del-sel-sd-hs = <0x1>; + ti,itap-del-sel-sdr12 = <0xa>; + ti,itap-del-sel-sdr25 = <0x1>; ti,clkbuf-sel = <0x7>; bus-width = <4>; status = "disabled"; @@ -538,21 +540,67 @@ clocks = <&k3_clks 184 5>, <&k3_clks 184 6>; clock-names = "clk_ahb", "clk_xin"; ti,trm-icp = <0x2>; - ti,otap-del-sel-legacy = <0x0>; + ti,otap-del-sel-legacy = <0x8>; ti,otap-del-sel-sd-hs = <0x0>; - ti,otap-del-sel-sdr12 = <0xf>; - ti,otap-del-sel-sdr25 = <0xf>; - ti,otap-del-sel-sdr50 = <0xc>; - ti,otap-del-sel-sdr104 = <0x6>; - ti,otap-del-sel-ddr50 = <0x9>; - ti,itap-del-sel-legacy = <0x0>; - ti,itap-del-sel-sd-hs = <0x0>; - ti,itap-del-sel-sdr12 = <0x0>; - ti,itap-del-sel-sdr25 = <0x0>; + ti,otap-del-sel-sdr12 = <0x0>; + ti,otap-del-sel-sdr25 = <0x0>; + ti,otap-del-sel-sdr50 = <0x8>; + ti,otap-del-sel-sdr104 = <0x7>; + ti,otap-del-sel-ddr50 = <0x8>; + ti,itap-del-sel-legacy = <0xa>; + ti,itap-del-sel-sd-hs = <0xa>; + ti,itap-del-sel-sdr12 = <0xa>; + ti,itap-del-sel-sdr25 = <0x1>; ti,clkbuf-sel = <0x7>; status = "disabled"; }; + usbss0: dwc3-usb@f900000 { + compatible = "ti,am62-usb"; + reg = <0x00 0x0f900000 0x00 0x800>; + clocks = <&k3_clks 161 3>; + clock-names = "ref"; + ti,syscon-phy-pll-refclk = <&wkup_conf 0x4008>; + #address-cells = <2>; + #size-cells = <2>; + power-domains = <&k3_pds 178 TI_SCI_PD_EXCLUSIVE>; + ranges; + status = "disabled"; + + usb0: usb@31000000 { + compatible = "snps,dwc3"; + reg =<0x00 0x31000000 0x00 0x50000>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */ + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */ + interrupt-names = "host", "peripheral"; + maximum-speed = "high-speed"; + dr_mode = "otg"; + }; + }; + + usbss1: dwc3-usb@f910000 { + compatible = "ti,am62-usb"; + reg = <0x00 0x0f910000 0x00 0x800>; + clocks = <&k3_clks 162 3>; + clock-names = "ref"; + ti,syscon-phy-pll-refclk = <&wkup_conf 0x4018>; + #address-cells = <2>; + #size-cells = <2>; + power-domains = <&k3_pds 179 TI_SCI_PD_EXCLUSIVE>; + ranges; + status = "disabled"; + + usb1: usb@31100000 { + compatible = "snps,dwc3"; + reg =<0x00 0x31100000 0x00 0x50000>; + interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */ + <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */ + interrupt-names = "host", "peripheral"; + maximum-speed = "high-speed"; + dr_mode = "otg"; + }; + }; + fss: bus@fc00000 { compatible = "simple-bus"; reg = <0x00 0x0fc00000 0x00 0x70000>; diff --git a/arch/arm64/boot/dts/ti/k3-am625-sk.dts b/arch/arm64/boot/dts/ti/k3-am625-sk.dts index 4f179b146cab..6bc7d63cf52f 100644 --- a/arch/arm64/boot/dts/ti/k3-am625-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am625-sk.dts @@ -24,6 +24,8 @@ spi0 = &ospi0; ethernet0 = &cpsw_port1; ethernet1 = &cpsw_port2; + usb0 = &usb0; + usb1 = &usb1; }; chosen { @@ -284,6 +286,12 @@ AM62X_IOPAD(0x01d4, PIN_INPUT, 7) /* (B15) UART0_RTSn.GPIO1_23 */ >; }; + + main_usb1_pins_default: main-usb1-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x0258, PIN_OUTPUT, 0) /* (F18) USB1_DRVVBUS */ + >; + }; }; &wkup_uart0 { @@ -464,3 +472,22 @@ }; }; }; + +&usbss0 { + status = "okay"; + ti,vbus-divider; +}; + +&usbss1 { + status = "okay"; +}; + +&usb0 { + dr_mode = "peripheral"; +}; + +&usb1 { + dr_mode = "host"; + pinctrl-names = "default"; + pinctrl-0 = <&main_usb1_pins_default>; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am625.dtsi b/arch/arm64/boot/dts/ti/k3-am625.dtsi index cea2cc7de5dd..acc7f8ab6426 100644 --- a/arch/arm64/boot/dts/ti/k3-am625.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am625.dtsi @@ -146,6 +146,7 @@ L2_0: l2-cache0 { compatible = "cache"; + cache-unified; cache-level = <2>; cache-size = <0x40000>; cache-line-size = <64>; diff --git a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi index bc4b50bcd177..393a1a40b68b 100644 --- a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi @@ -48,6 +48,18 @@ #address-cells = <1>; #size-cells = <1>; ranges = <0x00 0x00 0x00100000 0x20000>; + + phy_gmii_sel: phy@4044 { + compatible = "ti,am654-phy-gmii-sel"; + reg = <0x4044 0x8>; + #phy-cells = <1>; + }; + + epwm_tbclk: clock-controller@4130 { + compatible = "ti,am62-epwm-tbclk", "syscon"; + reg = <0x4130 0x4>; + #clock-cells = <1>; + }; }; dmss: bus@48000000 { @@ -69,6 +81,67 @@ interrupt-names = "rx_012"; interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; }; + + inta_main_dmss: interrupt-controller@48000000 { + compatible = "ti,sci-inta"; + reg = <0x00 0x48000000 0x00 0x100000>; + #interrupt-cells = <0>; + interrupt-controller; + interrupt-parent = <&gic500>; + msi-controller; + ti,sci = <&dmsc>; + ti,sci-dev-id = <28>; + ti,interrupt-ranges = <6 70 34>; + ti,unmapped-event-sources = <&main_bcdma>, <&main_pktdma>; + }; + + main_bcdma: dma-controller@485c0100 { + compatible = "ti,am64-dmss-bcdma"; + reg = <0x00 0x485c0100 0x00 0x100>, + <0x00 0x4c000000 0x00 0x20000>, + <0x00 0x4a820000 0x00 0x20000>, + <0x00 0x4aa40000 0x00 0x20000>, + <0x00 0x4bc00000 0x00 0x100000>; + reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt"; + msi-parent = <&inta_main_dmss>; + #dma-cells = <3>; + ti,sci = <&dmsc>; + ti,sci-dev-id = <26>; + ti,sci-rm-range-bchan = <0x20>; /* BLOCK_COPY_CHAN */ + ti,sci-rm-range-rchan = <0x21>; /* SPLIT_TR_RX_CHAN */ + ti,sci-rm-range-tchan = <0x22>; /* SPLIT_TR_TX_CHAN */ + }; + + main_pktdma: dma-controller@485c0000 { + compatible = "ti,am64-dmss-pktdma"; + reg = <0x00 0x485c0000 0x00 0x100>, + <0x00 0x4a800000 0x00 0x20000>, + <0x00 0x4aa00000 0x00 0x40000>, + <0x00 0x4b800000 0x00 0x400000>; + reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt"; + msi-parent = <&inta_main_dmss>; + #dma-cells = <2>; + ti,sci = <&dmsc>; + ti,sci-dev-id = <30>; + ti,sci-rm-range-tchan = <0x23>, /* UNMAPPED_TX_CHAN */ + <0x24>, /* CPSW_TX_CHAN */ + <0x25>, /* SAUL_TX_0_CHAN */ + <0x26>; /* SAUL_TX_1_CHAN */ + ti,sci-rm-range-tflow = <0x10>, /* RING_UNMAPPED_TX_CHAN */ + <0x11>, /* RING_CPSW_TX_CHAN */ + <0x12>, /* RING_SAUL_TX_0_CHAN */ + <0x13>; /* RING_SAUL_TX_1_CHAN */ + ti,sci-rm-range-rchan = <0x29>, /* UNMAPPED_RX_CHAN */ + <0x2b>, /* CPSW_RX_CHAN */ + <0x2d>, /* SAUL_RX_0_CHAN */ + <0x2f>, /* SAUL_RX_1_CHAN */ + <0x31>, /* SAUL_RX_2_CHAN */ + <0x33>; /* SAUL_RX_3_CHAN */ + ti,sci-rm-range-rflow = <0x2a>, /* FLOW_UNMAPPED_RX_CHAN */ + <0x2c>, /* FLOW_CPSW_RX_CHAN */ + <0x2e>, /* FLOW_SAUL_RX_0/1_CHAN */ + <0x32>; /* FLOW_SAUL_RX_2/3_CHAN */ + }; }; dmsc: system-controller@44043000 { @@ -222,6 +295,39 @@ status = "disabled"; }; + main_spi0: spi@20100000 { + compatible = "ti,am654-mcspi", "ti,omap4-mcspi"; + reg = <0x00 0x20100000 0x00 0x400>; + interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 141 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 141 0>; + status = "disabled"; + }; + + main_spi1: spi@20110000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x20110000 0x00 0x400>; + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 142 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 142 0>; + status = "disabled"; + }; + + main_spi2: spi@20120000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x20120000 0x00 0x400>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 143 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 143 0>; + status = "disabled"; + }; + main_gpio_intr: interrupt-controller@a00000 { compatible = "ti,sci-intr"; reg = <0x00 0x00a00000 0x00 0x800>; @@ -295,4 +401,263 @@ no-1-8-v; status = "disabled"; }; + + usbss0: dwc3-usb@f900000 { + compatible = "ti,am62-usb"; + reg = <0x00 0x0f900000 0x00 0x800>; + clocks = <&k3_clks 161 3>; + clock-names = "ref"; + ti,syscon-phy-pll-refclk = <&wkup_conf 0x4008>; + #address-cells = <2>; + #size-cells = <2>; + power-domains = <&k3_pds 178 TI_SCI_PD_EXCLUSIVE>; + ranges; + status = "disabled"; + + usb0: usb@31000000 { + compatible = "snps,dwc3"; + reg =<0x00 0x31000000 0x00 0x50000>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */ + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */ + interrupt-names = "host", "peripheral"; + maximum-speed = "high-speed"; + dr_mode = "otg"; + }; + }; + + usbss1: dwc3-usb@f910000 { + compatible = "ti,am62-usb"; + reg = <0x00 0x0f910000 0x00 0x800>; + clocks = <&k3_clks 162 3>; + clock-names = "ref"; + ti,syscon-phy-pll-refclk = <&wkup_conf 0x4018>; + #address-cells = <2>; + #size-cells = <2>; + power-domains = <&k3_pds 179 TI_SCI_PD_EXCLUSIVE>; + ranges; + status = "disabled"; + + usb1: usb@31100000 { + compatible = "snps,dwc3"; + reg =<0x00 0x31100000 0x00 0x50000>; + interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */ + <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */ + interrupt-names = "host", "peripheral"; + maximum-speed = "high-speed"; + dr_mode = "otg"; + }; + }; + + fss: bus@fc00000 { + compatible = "simple-bus"; + reg = <0x00 0x0fc00000 0x00 0x70000>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + ospi0: spi@fc40000 { + compatible = "ti,am654-ospi", "cdns,qspi-nor"; + reg = <0x00 0x0fc40000 0x00 0x100>, + <0x05 0x00000000 0x01 0x00000000>; + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; + cdns,fifo-depth = <256>; + cdns,fifo-width = <4>; + cdns,trigger-address = <0x0>; + clocks = <&k3_clks 75 7>; + assigned-clocks = <&k3_clks 75 7>; + assigned-clock-parents = <&k3_clks 75 8>; + assigned-clock-rates = <166666666>; + power-domains = <&k3_pds 75 TI_SCI_PD_EXCLUSIVE>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + cpsw3g: ethernet@8000000 { + compatible = "ti,am642-cpsw-nuss"; + #address-cells = <2>; + #size-cells = <2>; + reg = <0x0 0x8000000 0x0 0x200000>; + reg-names = "cpsw_nuss"; + ranges = <0x0 0x0 0x0 0x8000000 0x0 0x200000>; + clocks = <&k3_clks 13 0>; + assigned-clocks = <&k3_clks 13 3>; + assigned-clock-parents = <&k3_clks 13 11>; + clock-names = "fck"; + power-domains = <&k3_pds 13 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + + dmas = <&main_pktdma 0xc600 15>, + <&main_pktdma 0xc601 15>, + <&main_pktdma 0xc602 15>, + <&main_pktdma 0xc603 15>, + <&main_pktdma 0xc604 15>, + <&main_pktdma 0xc605 15>, + <&main_pktdma 0xc606 15>, + <&main_pktdma 0xc607 15>, + <&main_pktdma 0x4600 15>; + dma-names = "tx0", "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", + "tx7", "rx"; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + cpsw_port1: port@1 { + reg = <1>; + ti,mac-only; + label = "port1"; + phys = <&phy_gmii_sel 1>; + mac-address = [00 00 00 00 00 00]; + ti,syscon-efuse = <&wkup_conf 0x200>; + }; + + cpsw_port2: port@2 { + reg = <2>; + ti,mac-only; + label = "port2"; + phys = <&phy_gmii_sel 2>; + mac-address = [00 00 00 00 00 00]; + }; + }; + + cpsw3g_mdio: mdio@f00 { + compatible = "ti,cpsw-mdio","ti,davinci_mdio"; + reg = <0x0 0xf00 0x0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&k3_clks 13 0>; + clock-names = "fck"; + bus_freq = <1000000>; + }; + + cpts@3d000 { + compatible = "ti,j721e-cpts"; + reg = <0x0 0x3d000 0x0 0x400>; + clocks = <&k3_clks 13 3>; + clock-names = "cpts"; + interrupts-extended = <&gic500 GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cpts"; + ti,cpts-ext-ts-inputs = <4>; + ti,cpts-periodic-outputs = <2>; + }; + }; + + hwspinlock: spinlock@2a000000 { + compatible = "ti,am64-hwspinlock"; + reg = <0x00 0x2a000000 0x00 0x1000>; + #hwlock-cells = <1>; + }; + + mailbox0_cluster0: mailbox@29000000 { + compatible = "ti,am64-mailbox"; + reg = <0x00 0x29000000 0x00 0x200>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + }; + + mailbox0_cluster1: mailbox@29010000 { + compatible = "ti,am64-mailbox"; + reg = <0x00 0x29010000 0x00 0x200>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + }; + + mailbox0_cluster2: mailbox@29020000 { + compatible = "ti,am64-mailbox"; + reg = <0x00 0x29020000 0x00 0x200>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + }; + + mailbox0_cluster3: mailbox@29030000 { + compatible = "ti,am64-mailbox"; + reg = <0x00 0x29030000 0x00 0x200>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + }; + + main_mcan0: can@20701000 { + compatible = "bosch,m_can"; + reg = <0x00 0x20701000 0x00 0x200>, + <0x00 0x20708000 0x00 0x8000>; + reg-names = "m_can", "message_ram"; + power-domains = <&k3_pds 98 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 98 6>, <&k3_clks 98 1>; + clock-names = "hclk", "cclk"; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; + status = "disabled"; + }; + + epwm0: pwm@23000000 { + compatible = "ti,am64-epwm", "ti,am3352-ehrpwm"; + #pwm-cells = <3>; + reg = <0x00 0x23000000 0x00 0x100>; + power-domains = <&k3_pds 86 TI_SCI_PD_EXCLUSIVE>; + clocks = <&epwm_tbclk 0>, <&k3_clks 86 0>; + clock-names = "tbclk", "fck"; + status = "disabled"; + }; + + epwm1: pwm@23010000 { + compatible = "ti,am64-epwm", "ti,am3352-ehrpwm"; + #pwm-cells = <3>; + reg = <0x00 0x23010000 0x00 0x100>; + power-domains = <&k3_pds 87 TI_SCI_PD_EXCLUSIVE>; + clocks = <&epwm_tbclk 1>, <&k3_clks 87 0>; + clock-names = "tbclk", "fck"; + status = "disabled"; + }; + + epwm2: pwm@23020000 { + compatible = "ti,am64-epwm", "ti,am3352-ehrpwm"; + #pwm-cells = <3>; + reg = <0x00 0x23020000 0x00 0x100>; + power-domains = <&k3_pds 88 TI_SCI_PD_EXCLUSIVE>; + clocks = <&epwm_tbclk 2>, <&k3_clks 88 0>; + clock-names = "tbclk", "fck"; + status = "disabled"; + }; + + ecap0: pwm@23100000 { + compatible = "ti,am3352-ecap"; + #pwm-cells = <3>; + reg = <0x00 0x23100000 0x00 0x100>; + power-domains = <&k3_pds 51 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 51 0>; + clock-names = "fck"; + status = "disabled"; + }; + + ecap1: pwm@23110000 { + compatible = "ti,am3352-ecap"; + #pwm-cells = <3>; + reg = <0x00 0x23110000 0x00 0x100>; + power-domains = <&k3_pds 52 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 52 0>; + clock-names = "fck"; + status = "disabled"; + }; + + ecap2: pwm@23120000 { + compatible = "ti,am3352-ecap"; + #pwm-cells = <3>; + reg = <0x00 0x23120000 0x00 0x100>; + power-domains = <&k3_pds 53 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 53 0>; + clock-names = "fck"; + status = "disabled"; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi index 6d1e501b94ab..2bb813e784a2 100644 --- a/arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi @@ -36,4 +36,55 @@ clock-names = "fck"; status = "disabled"; }; + + mcu_spi0: spi@4b00000 { + compatible = "ti,am654-mcspi", "ti,omap4-mcspi"; + reg = <0x00 0x04b00000 0x00 0x400>; + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 147 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 147 0>; + status = "disabled"; + }; + + mcu_spi1: spi@4b10000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x04b10000 0x00 0x400>; + interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 148 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 148 0>; + status = "disabled"; + }; + + mcu_gpio_intr: interrupt-controller@4210000 { + compatible = "ti,sci-intr"; + reg = <0x00 0x04210000 0x00 0x200>; + ti,intr-trigger-type = <1>; + interrupt-controller; + interrupt-parent = <&gic500>; + #interrupt-cells = <1>; + ti,sci = <&dmsc>; + ti,sci-dev-id = <5>; + ti,interrupt-ranges = <0 104 4>; + }; + + mcu_gpio0: gpio@4201000 { + compatible = "ti,am64-gpio", "ti,keystone-gpio"; + reg = <0x00 0x04201000 0x00 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&mcu_gpio_intr>; + interrupts = <30>, <31>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <24>; + ti,davinci-gpio-unbanked = <0>; + power-domains = <&k3_pds 79 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 79 0>; + clock-names = "gpio"; + status = "disabled"; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts index 576dbce80ad8..5c9012141ee2 100644 --- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts @@ -9,6 +9,7 @@ #include <dt-bindings/leds/common.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/net/ti-dp83867.h> #include "k3-am62a7.dtsi" / { @@ -158,6 +159,36 @@ AM62AX_IOPAD(0x244, PIN_OUTPUT, 7) /* (D18) MMC1_SDWP.GPIO1_49 */ >; }; + + main_usb1_pins_default: main-usb1-pins-default { + pinctrl-single,pins = < + AM62AX_IOPAD(0x0258, PIN_OUTPUT, 0) /* (F18) USB1_DRVVBUS */ + >; + }; + + main_mdio1_pins_default: main-mdio1-pins-default { + pinctrl-single,pins = < + AM62AX_IOPAD(0x160, PIN_OUTPUT, 0) /* (V12) MDIO0_MDC */ + AM62AX_IOPAD(0x15c, PIN_INPUT, 0) /* (V13) MDIO0_MDIO */ + >; + }; + + main_rgmii1_pins_default: main-rgmii1-pins-default { + pinctrl-single,pins = < + AM62AX_IOPAD(0x14c, PIN_INPUT, 0) /* (AB16) RGMII1_RD0 */ + AM62AX_IOPAD(0x150, PIN_INPUT, 0) /* (V15) RGMII1_RD1 */ + AM62AX_IOPAD(0x154, PIN_INPUT, 0) /* (W15) RGMII1_RD2 */ + AM62AX_IOPAD(0x158, PIN_INPUT, 0) /* (V14) RGMII1_RD3 */ + AM62AX_IOPAD(0x148, PIN_INPUT, 0) /* (AA16) RGMII1_RXC */ + AM62AX_IOPAD(0x144, PIN_INPUT, 0) /* (AA15) RGMII1_RX_CTL */ + AM62AX_IOPAD(0x134, PIN_INPUT, 0) /* (Y17) RGMII1_TD0 */ + AM62AX_IOPAD(0x138, PIN_INPUT, 0) /* (V16) RGMII1_TD1 */ + AM62AX_IOPAD(0x13c, PIN_INPUT, 0) /* (Y16) RGMII1_TD2 */ + AM62AX_IOPAD(0x140, PIN_INPUT, 0) /* (AA17) RGMII1_TD3 */ + AM62AX_IOPAD(0x130, PIN_INPUT, 0) /* (AB17) RGMII1_TXC */ + AM62AX_IOPAD(0x12c, PIN_INPUT, 0) /* (W16) RGMII1_TX_CTL */ + >; + }; }; &main_i2c0 { @@ -221,3 +252,42 @@ pinctrl-names = "default"; pinctrl-0 = <&main_uart0_pins_default>; }; + +&usbss1 { + status = "okay"; +}; + +&usb1 { + dr_mode = "host"; + pinctrl-names = "default"; + pinctrl-0 = <&main_usb1_pins_default>; +}; + +&cpsw3g { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_rgmii1_pins_default>; +}; + +&cpsw_port1 { + status = "okay"; + phy-mode = "rgmii-rxid"; + phy-handle = <&cpsw3g_phy0>; +}; + +&cpsw_port2 { + status = "disabled"; +}; + +&cpsw3g_mdio { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_mdio1_pins_default>; + + cpsw3g_phy0: ethernet-phy@0 { + reg = <0>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,min-output-impedance; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am62a7.dtsi b/arch/arm64/boot/dts/ti/k3-am62a7.dtsi index 331d89fda29d..9734549851c0 100644 --- a/arch/arm64/boot/dts/ti/k3-am62a7.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62a7.dtsi @@ -95,6 +95,7 @@ L2_0: l2-cache0 { compatible = "cache"; + cache-unified; cache-level = <2>; cache-size = <0x40000>; cache-line-size = <64>; diff --git a/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi new file mode 100644 index 000000000000..8dfb6301b17d --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi @@ -0,0 +1,231 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2021 PHYTEC America, LLC - https://www.phytec.com + * Author: Matt McKee <mmckee@phytec.com> + * + * Copyright (C) 2022 PHYTEC Messtechnik GmbH + * Author: Wadim Egorov <w.egorov@phytec.de> + * + * Product homepage: + * https://www.phytec.com/product/phycore-am64x + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/net/ti-dp83867.h> + +/ { + model = "PHYTEC phyCORE-AM64x"; + compatible = "phytec,am64-phycore-som", "ti,am642"; + + aliases { + ethernet0 = &cpsw_port1; + mmc0 = &sdhci0; + rtc0 = &i2c_som_rtc; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x00000000 0x80000000 0x00000000 0x80000000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + secure_ddr: optee@9e800000 { + reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */ + alignment = <0x1000>; + no-map; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&leds_pins_default>; + + led-0 { + color = <LED_COLOR_ID_GREEN>; + gpios = <&main_gpio0 12 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + function = LED_FUNCTION_HEARTBEAT; + }; + }; + + vcc_5v0_som: regulator-vcc-5v0-som { + /* VIN / VCC_5V0_SOM */ + compatible = "regulator-fixed"; + regulator-name = "VCC_5V0_SOM"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&main_pmx0 { + cpsw_mdio_pins_default: cpsw-mdio-pins-default { + pinctrl-single,pins = < + AM64X_IOPAD(0x01f8, PIN_INPUT, 4) /* (P5) PRG0_PRU1_GPO18.MDIO0_MDIO */ + AM64X_IOPAD(0x01fc, PIN_OUTPUT, 4) /* (R2) PRG0_PRU1_GPO19.MDIO0_MDC */ + AM64X_IOPAD(0x0100, PIN_OUTPUT, 7) /* (V7) PRG1_PRU0_GPO18.GPIO0_63 */ + >; + }; + + cpsw_rgmii1_pins_default: cpsw-rgmii1-pins-default { + pinctrl-single,pins = < + AM64X_IOPAD(0x0184, PIN_INPUT, 4) /* (W6) PRG0_PRU0_GPO9.RGMII1_RX_CTL */ + AM64X_IOPAD(0x0188, PIN_INPUT, 4) /* (AA5) PRG0_PRU0_GPO10.RGMII1_RXC */ + AM64X_IOPAD(0x00dc, PIN_OUTPUT, 4) /* (U15) PRG1_PRU0_GPO9.RGMII1_TX_CTL */ + AM64X_IOPAD(0x00e0, PIN_OUTPUT, 4) /* (U14) PRG1_PRU0_GPO10.RGMII1_TXC */ + AM64X_IOPAD(0x01cc, PIN_INPUT, 4) /* (W5) PRG0_PRU1_GPO7.RGMII1_RD0 */ + AM64X_IOPAD(0x0124, PIN_OUTPUT, 4) /* (V15) PRG1_PRU1_GPO7.RGMII1_TD0 */ + AM64X_IOPAD(0x01d4, PIN_INPUT, 4) /* (Y5) PRG0_PRU1_GPO9.RGMII1_RD1 */ + AM64X_IOPAD(0x012c, PIN_OUTPUT, 4) /* (V14) PRG1_PRU1_GPO9.RGMII1_TD1 */ + AM64X_IOPAD(0x01d8, PIN_INPUT, 4) /* (V6) PRG0_PRU1_GPO10.RGMII1_RD2 */ + AM64X_IOPAD(0x0130, PIN_OUTPUT, 4) /* (W14) PRG1_PRU1_GPO10.RGMII1_TD2 */ + AM64X_IOPAD(0x01f4, PIN_INPUT, 4) /* (V5) PRG0_PRU1_GPO17.RGMII1_RD3 */ + AM64X_IOPAD(0x014c, PIN_OUTPUT, 4) /* (AA14) PRG1_PRU1_GPO17.RGMII1_TD3 */ + AM64X_IOPAD(0x0154, PIN_INPUT, 7) /* (V12) PRG1_PRU1_GPO19.GPIO0_84 */ + >; + }; + + eeprom_wp_pins_default: eeprom-wp-pins-default { + pinctrl-single,pins = < + AM64X_IOPAD(0x0208, PIN_OUTPUT, 7) /* (D12) SPI0_CS0.GPIO1_42 */ + >; + }; + + leds_pins_default: leds-pins-default { + pinctrl-single,pins = < + AM64X_IOPAD(0x0030, PIN_OUTPUT, 7) /* (L18) OSPI0_CSn1.GPIO0_12 */ + >; + }; + + main_i2c0_pins_default: main-i2c0-pins-default { + pinctrl-single,pins = < + AM64X_IOPAD(0x0260, PIN_INPUT, 0) /* (A18) I2C0_SCL */ + AM64X_IOPAD(0x0264, PIN_INPUT, 0) /* (B18) I2C0_SDA */ + >; + }; + + ospi0_pins_default: ospi0-pins-default { + pinctrl-single,pins = < + AM64X_IOPAD(0x0000, PIN_OUTPUT, 0) /* (N20) OSPI0_CLK */ + AM64X_IOPAD(0x0008, PIN_INPUT, 0) /* (N19) OSPI0_DQS */ + AM64X_IOPAD(0x000c, PIN_INPUT, 0) /* (M19) OSPI0_D0 */ + AM64X_IOPAD(0x0010, PIN_INPUT, 0) /* (M18) OSPI0_D1 */ + AM64X_IOPAD(0x0014, PIN_INPUT, 0) /* (M20) OSPI0_D2 */ + AM64X_IOPAD(0x0018, PIN_INPUT, 0) /* (M21) OSPI0_D3 */ + AM64X_IOPAD(0x001c, PIN_INPUT, 0) /* (P21) OSPI0_D4 */ + AM64X_IOPAD(0x0020, PIN_INPUT, 0) /* (P20) OSPI0_D5 */ + AM64X_IOPAD(0x0024, PIN_INPUT, 0) /* (N18) OSPI0_D6 */ + AM64X_IOPAD(0x0028, PIN_INPUT, 0) /* (M17) OSPI0_D7 */ + AM64X_IOPAD(0x002c, PIN_OUTPUT, 0) /* (L19) OSPI0_CSn0 */ + >; + }; +}; + +&cpsw3g { + pinctrl-names = "default"; + pinctrl-0 = <&cpsw_rgmii1_pins_default>; +}; + +&cpsw3g_mdio { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&cpsw_mdio_pins_default>; + + cpsw3g_phy1: ethernet-phy@1 { + compatible = "ethernet-phy-id2000.a231", "ethernet-phy-ieee802.3-c22"; + reg = <1>; + interrupt-parent = <&main_gpio0>; + interrupts = <84 IRQ_TYPE_EDGE_FALLING>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + reset-gpios = <&main_gpio0 63 GPIO_ACTIVE_LOW>; + reset-assert-us = <1000>; + reset-deassert-us = <1000>; + }; +}; + +&cpsw_port1 { + phy-mode = "rgmii-rxid"; + phy-handle = <&cpsw3g_phy1>; +}; + +&cpsw_port2 { + status = "disabled"; +}; + +&mailbox0_cluster2 { + status = "disabled"; +}; + +&mailbox0_cluster3 { + status = "disabled"; +}; + +&mailbox0_cluster4 { + status = "disabled"; +}; + +&mailbox0_cluster5 { + status = "disabled"; +}; + +&mailbox0_cluster6 { + status = "disabled"; +}; + +&mailbox0_cluster7 { + status = "disabled"; +}; + +&main_i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c0_pins_default>; + clock-frequency = <400000>; + + eeprom@50 { + compatible = "atmel,24c32"; + pinctrl-names = "default"; + pinctrl-0 = <&eeprom_wp_pins_default>; + pagesize = <32>; + reg = <0x50>; + }; + + i2c_som_rtc: rtc@52 { + compatible = "microcrystal,rv3028"; + reg = <0x52>; + }; +}; + +&ospi0 { + pinctrl-names = "default"; + pinctrl-0 = <&ospi0_pins_default>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-tx-bus-width = <8>; + spi-rx-bus-width = <8>; + spi-max-frequency = <25000000>; + cdns,tshsl-ns = <60>; + cdns,tsd2d-ns = <60>; + cdns,tchsh-ns = <60>; + cdns,tslch-ns = <60>; + cdns,read-delay = <0>; + }; +}; + +&sdhci0 { + bus-width = <8>; + non-removable; + ti,driver-strength-ohm = <50>; + disable-wp; + keep-power-in-suspend; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts new file mode 100644 index 000000000000..8d3114d14a8b --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts @@ -0,0 +1,277 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2021 PHYTEC America, LLC - https://www.phytec.com + * Author: Matt McKee <mmckee@phytec.com> + * + * Copyright (C) 2022 PHYTEC Messtechnik GmbH + * Author: Wadim Egorov <w.egorov@phytec.de> + * + * Product homepage: + * https://www.phytec.com/product/phyboard-am64x + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/mux/ti-serdes.h> +#include <dt-bindings/phy/phy.h> +#include "k3-am642.dtsi" +#include "k3-am64-phycore-som.dtsi" + +/ { + compatible = "phytec,am642-phyboard-electra-rdk", + "phytec,am64-phycore-som", "ti,am642"; + model = "PHYTEC phyBOARD-Electra-AM64x RDK"; + + aliases { + mmc1 = &sdhci1; + serial2 = &main_uart0; + serial3 = &main_uart1; + }; + + chosen { + stdout-path = &main_uart0; + }; + + can_tc1: can-phy0 { + compatible = "ti,tcan1042"; + pinctrl-names = "default"; + pinctrl-0 = <&can_tc1_pins_default>; + #phy-cells = <0>; + max-bitrate = <5000000>; + standby-gpios = <&main_gpio0 32 GPIO_ACTIVE_HIGH>; + }; + + can_tc2: can-phy1 { + compatible = "ti,tcan1042"; + pinctrl-names = "default"; + pinctrl-0 = <&can_tc2_pins_default>; + #phy-cells = <0>; + max-bitrate = <5000000>; + standby-gpios = <&main_gpio0 35 GPIO_ACTIVE_HIGH>; + }; + + keys { + compatible = "gpio-keys"; + autorepeat; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pins_default>; + + key-home { + label = "home"; + linux,code = <KEY_HOME>; + gpios = <&main_gpio0 17 GPIO_ACTIVE_HIGH>; + }; + + key-menu { + label = "menu"; + linux,code = <KEY_MENU>; + gpios = <&main_gpio0 21 GPIO_ACTIVE_HIGH>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&leds_pins_default &user_leds_pins_default>; + + led-1 { + color = <LED_COLOR_ID_RED>; + gpios = <&main_gpio0 15 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + function = LED_FUNCTION_DISK; + }; + + led-2 { + color = <LED_COLOR_ID_GREEN>; + gpios = <&main_gpio0 16 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc1"; + function = LED_FUNCTION_DISK; + }; + }; + + vcc_3v3_mmc: regulator-sd { + /* TPS22963C */ + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3_MMC"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&main_pmx0 { + can_tc1_pins_default: can-tc1-pins-default { + pinctrl-single,pins = < + AM64X_IOPAD(0x0084, PIN_OUTPUT, 7) /* (P16) GPMC0_ADVn_ALE.GPIO0_32 */ + >; + }; + + can_tc2_pins_default: can-tc2-pins-default { + pinctrl-single,pins = < + AM64X_IOPAD(0x0090, PIN_OUTPUT, 7) /* (P17) GPMC0_BE0n_CLE.GPIO0_35 */ + >; + }; + + gpio_keys_pins_default: gpio-keys-pins-default { + pinctrl-single,pins = < + AM64X_IOPAD(0x0044, PIN_INPUT, 7) /* (T18) GPMC0_AD2.GPIO0_17 */ + AM64X_IOPAD(0x0054, PIN_INPUT, 7) /* (V20) GPMC0_AD6.GPIO0_21 */ + >; + }; + + main_i2c1_pins_default: main-i2c1-pins-default { + pinctrl-single,pins = < + AM64X_IOPAD(0x0268, PIN_INPUT, 0) /* (C18) I2C1_SCL */ + AM64X_IOPAD(0x026c, PIN_INPUT, 0) /* (B19) I2C1_SDA */ + >; + }; + + main_mcan0_pins_default: main-mcan0-pins-default { + pinctrl-single,pins = < + AM64X_IOPAD(0x0250, PIN_OUTPUT, 0) /* (A17) MCAN0_TX */ + AM64X_IOPAD(0x0254, PIN_INPUT, 0) /* (B17) MCAN0_RX */ + >; + }; + + main_mcan1_pins_default: main-mcan1-pins-default { + pinctrl-single,pins = < + AM64X_IOPAD(0x0258, PIN_OUTPUT, 0) /* (C17) MCAN1_TX */ + AM64X_IOPAD(0x025c, PIN_INPUT, 0) /* (D17) MCAN1_RX */ + >; + }; + + main_mmc1_pins_default: main-mmc1-pins-default { + pinctrl-single,pins = < + AM64X_IOPAD(0x027c, PIN_INPUT_PULLUP, 0) /* (K18) MMC1_DAT3 */ + AM64X_IOPAD(0x0280, PIN_INPUT_PULLUP, 0) /* (K19) MMC1_DAT2 */ + AM64X_IOPAD(0x0284, PIN_INPUT_PULLUP, 0) /* (L21) MMC1_DAT1 */ + AM64X_IOPAD(0x0288, PIN_INPUT_PULLUP, 0) /* (K21) MMC1_DAT0 */ + AM64X_IOPAD(0x028c, PIN_INPUT_PULLDOWN, 0) /* (L20) MMC1_CLK */ + AM64X_IOPAD(0x0290, PIN_INPUT, 0) /* MMC1_CLKLB */ + AM64X_IOPAD(0x0294, PIN_INPUT_PULLUP, 0) /* (J19) MMC1_CMD */ + AM64X_IOPAD(0x0298, PIN_INPUT_PULLUP, 0) /* (D19) MMC1_SDCD */ + >; + }; + + main_uart0_pins_default: main-uart0-pins-default { + pinctrl-single,pins = < + AM64X_IOPAD(0x0230, PIN_INPUT, 0) /* (D15) UART0_RXD */ + AM64X_IOPAD(0x0234, PIN_OUTPUT, 0) /* (C16) UART0_TXD */ + >; + }; + + main_uart1_pins_default: main-uart1-pins-default { + pinctrl-single,pins = < + AM64X_IOPAD(0x0248, PIN_INPUT, 0) /* (D16) UART1_CTSn */ + AM64X_IOPAD(0x024C, PIN_OUTPUT, 0) /* (E16) UART1_RTSn */ + AM64X_IOPAD(0x0240, PIN_INPUT, 0) /* (E15) UART1_RXD */ + AM64X_IOPAD(0x0244, PIN_OUTPUT, 0) /* (E14) UART1_TXD */ + >; + }; + + main_usb0_pins_default: main-usb0-pins-default { + pinctrl-single,pins = < + AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0) /* (E19) USB0_DRVVBUS */ + >; + }; + + pcie_usb_sel_pins_default: pcie-usb-sel-pins-default { + pinctrl-single,pins = < + AM64X_IOPAD(0x017c, PIN_OUTPUT, 7) /* (T1) PRG0_PRU0_GPO7.GPIO1_7 */ + >; + }; + + pcie0_pins_default: pcie0-pins-default { + pinctrl-single,pins = < + AM64X_IOPAD(0x0098, PIN_OUTPUT, 7) /* (W19) GPMC0_WAIT0.GPIO0_37 */ + >; + }; + + user_leds_pins_default: user-leds-pins-default { + pinctrl-single,pins = < + AM64X_IOPAD(0x003c, PIN_OUTPUT, 7) /* (T20) GPMC0_AD0.GPIO0_15 */ + AM64X_IOPAD(0x0040, PIN_OUTPUT, 7) /* (U21) GPMC0_AD1.GPIO0_16 */ + >; + }; +}; + +&main_i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c1_pins_default>; + clock-frequency = <400000>; + + eeprom@51 { + compatible = "atmel,24c02"; + pagesize = <16>; + reg = <0x51>; + }; +}; + +&main_mcan0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_mcan0_pins_default>; + phys = <&can_tc1>; +}; + +&main_mcan1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_mcan1_pins_default>; + phys = <&can_tc2>; +}; + +&main_uart0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_uart0_pins_default>; +}; + +&main_uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_uart1_pins_default>; + uart-has-rtscts; +}; + +&sdhci1 { + vmmc-supply = <&vcc_3v3_mmc>; + pinctrl-names = "default"; + pinctrl-0 = <&main_mmc1_pins_default>; + bus-width = <4>; + ti,driver-strength-ohm = <50>; + disable-wp; + no-1-8-v; +}; + +&serdes0 { + serdes0_pcie_usb_link: phy@0 { + reg = <0>; + cdns,num-lanes = <1>; + #phy-cells = <0>; + cdns,phy-type = <PHY_TYPE_USB3>; + resets = <&serdes_wiz0 1>; + }; +}; + +&serdes_ln_ctrl { + idle-states = <AM64_SERDES0_LANE0_USB>; +}; + +&usbss0 { + ti,vbus-divider; +}; + +&usb0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_usb0_pins_default>; + dr_mode = "host"; + maximum-speed = "super-speed"; + phys = <&serdes0_pcie_usb_link>; + phy-names = "cdns3,usb3-phy"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am642.dtsi b/arch/arm64/boot/dts/ti/k3-am642.dtsi index 8a76f4821b11..7a6eedea3aae 100644 --- a/arch/arm64/boot/dts/ti/k3-am642.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am642.dtsi @@ -58,6 +58,7 @@ L2_0: l2-cache0 { compatible = "cache"; cache-level = <2>; + cache-unified; cache-size = <0x40000>; cache-line-size = <64>; cache-sets = <256>; diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi index 3cced26b520a..96ac2b476b11 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi @@ -609,6 +609,52 @@ cdns,tchsh-ns = <60>; cdns,tslch-ns = <60>; cdns,read-delay = <2>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + seboot@0 { + label = "seboot"; + reg = <0x0 0x180000>; /* 1.5M */ + }; + + tispl@180000 { + label = "tispl"; + reg = <0x180000 0x200000>; /* 2M */ + }; + + u-boot@380000 { + label = "u-boot"; + reg = <0x380000 0x300000>; /* 3M */ + }; + + env@680000 { + label = "env"; + reg = <0x680000 0x20000>; /* 128K */ + }; + + env-backup@6a0000 { + label = "env.backup"; + reg = <0x6a0000 0x20000>; /* 128K */ + }; + + otpcmd@6c0000 { + label = "otpcmd"; + reg = <0x6c0000 0x10000>; /* 64K */ + }; + + unused@6d0000 { + label = "unused"; + reg = <0x6d0000 0x7b0000>; /* 7872K */ + }; + + seboot-backup@e80000 { + label = "seboot.backup"; + reg = <0xe80000 0x180000>; /* 1.5M */ + }; + }; }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am654.dtsi b/arch/arm64/boot/dts/ti/k3-am654.dtsi index a89257900047..4cc329b271ac 100644 --- a/arch/arm64/boot/dts/ti/k3-am654.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am654.dtsi @@ -93,6 +93,7 @@ L2_0: l2-cache0 { compatible = "cache"; cache-level = <2>; + cache-unified; cache-size = <0x80000>; cache-line-size = <64>; cache-sets = <512>; @@ -102,6 +103,7 @@ L2_1: l2-cache1 { compatible = "cache"; cache-level = <2>; + cache-unified; cache-size = <0x80000>; cache-line-size = <64>; cache-sets = <512>; diff --git a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts new file mode 100644 index 000000000000..9400e35882a6 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts @@ -0,0 +1,121 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) Siemens AG, 2018-2023 + * + * Authors: + * Chao Zeng <chao.zeng@siemens.com> + * Jan Kiszka <jan.kiszka@siemens.com> + * + * AM6548-based (quad-core) IOT2050 M.2 variant (based on Advanced Product + * Generation 2), 2 GB RAM, 16 GB eMMC, USB-serial converter on connector X30 + * + * Product homepage: + * https://new.siemens.com/global/en/products/automation/pc-based/iot-gateways/simatic-iot2050.html + */ + +#include "k3-am6548-iot2050-advanced-common.dtsi" +#include "k3-am65-iot2050-common-pg2.dtsi" + +/ { + compatible = "siemens,iot2050-advanced-m2", "ti,am654"; + model = "SIMATIC IOT2050 Advanced M2"; +}; + +&mcu_r5fss0 { + /* lock-step mode not supported on this board */ + ti,cluster-mode = <0>; +}; + +&main_pmx0 { + main_m2_enable_pins_default: main-m2-enable-pins-default { + pinctrl-single,pins = < + AM65X_IOPAD(0x01c4, PIN_INPUT_PULLUP, 7) /* (AH13) GPIO1_17 */ + >; + }; + + main_bkey_pcie_reset: main-bkey-pcie-reset { + pinctrl-single,pins = < + AM65X_IOPAD(0x01bc, PIN_OUTPUT_PULLUP, 7) /* (AG13) GPIO1_15 */ + >; + }; + + main_pmx0_m2_config_pins_default: main-pmx0-m2-config-pins-default { + pinctrl-single,pins = < + AM65X_IOPAD(0x01c8, PIN_INPUT_PULLUP, 7) /* (AE13) GPIO1_18 */ + AM65X_IOPAD(0x01cc, PIN_INPUT_PULLUP, 7) /* (AD13) GPIO1_19 */ + >; + }; + + main_m2_pcie_mux_control: main-m2-pcie-mux-control { + pinctrl-single,pins = < + AM65X_IOPAD(0x0148, PIN_INPUT_PULLUP, 7) /* (AG22) GPIO0_82 */ + AM65X_IOPAD(0x0160, PIN_INPUT_PULLUP, 7) /* (AE20) GPIO0_88 */ + AM65X_IOPAD(0x0164, PIN_INPUT_PULLUP, 7) /* (AF19) GPIO0_89 */ + >; + }; +}; + +&main_pmx1 { + main_pmx1_m2_config_pins_default: main-pmx1-m2-config-pins-default { + pinctrl-single,pins = < + AM65X_IOPAD(0x0018, PIN_INPUT_PULLUP, 7) /* (B22) GPIO1_88 */ + AM65X_IOPAD(0x001c, PIN_INPUT_PULLUP, 7) /* (C23) GPIO1_89 */ + >; + }; +}; + +&main_gpio0 { + pinctrl-names = "default"; + pinctrl-0 = < + &main_m2_pcie_mux_control + &arduino_io_d4_to_d9_pins_default + >; +}; + +&main_gpio1 { + pinctrl-names = "default"; + pinctrl-0 = < + &main_m2_enable_pins_default + &main_pmx0_m2_config_pins_default + &main_pmx1_m2_config_pins_default + &cp2102n_reset_pin_default + >; +}; + +/* + * Base configuration for B-key slot with PCIe x2, E-key with USB 2.0 only. + * Firmware switches to other modes via device tree overlays. + */ + +&serdes0 { + assigned-clocks = <&k3_clks 153 4>, <&serdes0 AM654_SERDES_CMU_REFCLK>; + assigned-clock-parents = <&k3_clks 153 8>, <&k3_clks 153 4>; +}; + +&pcie0_rc { + pinctrl-names = "default"; + pinctrl-0 = <&main_bkey_pcie_reset>; + + num-lanes = <2>; + phys = <&serdes0 PHY_TYPE_PCIE 1>, <&serdes1 PHY_TYPE_PCIE 1>; + phy-names = "pcie-phy0","pcie-phy1"; + reset-gpios = <&main_gpio1 15 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&pcie1_rc { + status = "disabled"; +}; + +&dwc3_0 { + assigned-clock-parents = <&k3_clks 151 4>, /* set REF_CLK to 20MHz i.e. PER0_PLL/48 */ + <&k3_clks 151 9>; /* set PIPE3_TXB_CLK to CLK_12M_RC/256 (for HS only) */ + /delete-property/ phys; + /delete-property/ phy-names; +}; + +&usb0 { + maximum-speed = "high-speed"; + /delete-property/ snps,dis-u1-entry-quirk; + /delete-property/ snps,dis-u2-entry-quirk; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts new file mode 100644 index 000000000000..2091cd2431fb --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts @@ -0,0 +1,335 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/ + * + * Base Board: https://www.ti.com/lit/zip/SPRR463 + */ + +/dts-v1/; + +#include "k3-am68-sk-som.dtsi" +#include <dt-bindings/net/ti-dp83867.h> +#include <dt-bindings/phy/phy-cadence.h> +#include <dt-bindings/phy/phy.h> +#include <dt-bindings/mux/ti-serdes.h> + +/ { + compatible = "ti,am68-sk", "ti,j721s2"; + model = "Texas Instruments AM68 SK"; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + aliases { + serial2 = &main_uart8; + mmc1 = &main_sdhci1; + can0 = &mcu_mcan0; + can1 = &mcu_mcan1; + can2 = &main_mcan6; + can3 = &main_mcan7; + }; + + vusb_main: regulator-vusb-main5v0 { + /* USB MAIN INPUT 5V DC */ + compatible = "regulator-fixed"; + regulator-name = "vusb-main5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + vsys_3v3: regulator-vsys3v3 { + /* Output of LM5141 */ + compatible = "regulator-fixed"; + regulator-name = "vsys_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vusb_main>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_mmc1: regulator-sd { + /* Output of TPS22918 */ + compatible = "regulator-fixed"; + regulator-name = "vdd_mmc1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + enable-active-high; + vin-supply = <&vsys_3v3>; + gpio = <&exp1 10 GPIO_ACTIVE_HIGH>; + }; + + vdd_sd_dv: regulator-tlv71033 { + /* Output of TLV71033 */ + compatible = "regulator-gpio"; + regulator-name = "tlv71033"; + pinctrl-names = "default"; + pinctrl-0 = <&vdd_sd_dv_pins_default>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + vin-supply = <&vsys_3v3>; + gpios = <&main_gpio0 49 GPIO_ACTIVE_HIGH>; + states = <1800000 0x0>, + <3300000 0x1>; + }; + + vsys_io_1v8: regulator-vsys-io-1v8 { + compatible = "regulator-fixed"; + regulator-name = "vsys_io_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + vsys_io_1v2: regulator-vsys-io-1v2 { + compatible = "regulator-fixed"; + regulator-name = "vsys_io_1v2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + + transceiver1: can-phy0 { + compatible = "ti,tcan1042"; + #phy-cells = <0>; + max-bitrate = <5000000>; + }; + + transceiver2: can-phy1 { + compatible = "ti,tcan1042"; + #phy-cells = <0>; + max-bitrate = <5000000>; + }; + + transceiver3: can-phy2 { + compatible = "ti,tcan1042"; + #phy-cells = <0>; + max-bitrate = <5000000>; + }; + + transceiver4: can-phy3 { + compatible = "ti,tcan1042"; + #phy-cells = <0>; + max-bitrate = <5000000>; + }; +}; + +&main_pmx0 { + main_uart8_pins_default: main-uart8-pins-default { + pinctrl-single,pins = < + J721S2_IOPAD(0x0d0, PIN_INPUT, 11) /* (AF26) SPI0_CS1.UART8_RXD */ + J721S2_IOPAD(0x0d4, PIN_OUTPUT, 11) /* (AH27) SPI0_CLK.UART8_TXD */ + >; + }; + + main_i2c0_pins_default: main-i2c0-pins-default { + pinctrl-single,pins = < + J721S2_IOPAD(0x0e0, PIN_INPUT, 0) /* (AH25) I2C0_SCL */ + J721S2_IOPAD(0x0e4, PIN_INPUT, 0) /* (AE24) I2C0_SDA */ + >; + }; + + main_mmc1_pins_default: main-mmc1-pins-default { + pinctrl-single,pins = < + J721S2_IOPAD(0x104, PIN_INPUT, 0) /* (P23) MMC1_CLK */ + J721S2_IOPAD(0x108, PIN_INPUT, 0) /* (N24) MMC1_CMD */ + J721S2_IOPAD(0x0fc, PIN_INPUT, 0) /* (M23) MMC1_DAT0 */ + J721S2_IOPAD(0x0f8, PIN_INPUT, 0) /* (P24) MMC1_DAT1 */ + J721S2_IOPAD(0x0f4, PIN_INPUT, 0) /* (R24) MMC1_DAT2 */ + J721S2_IOPAD(0x0f0, PIN_INPUT, 0) /* (R22) MMC1_DAT3 */ + J721S2_IOPAD(0x0e8, PIN_INPUT, 8) /* (AE25) TIMER_IO0.MMC1_SDCD */ + >; + }; + + vdd_sd_dv_pins_default: vdd-sd-dv-pins-default { + pinctrl-single,pins = < + J721S2_IOPAD(0x0c4, PIN_INPUT, 7) /* (AB26) ECAP0_IN_APWM_OUT.GPIO0_49 */ + >; + }; + + main_usbss0_pins_default: main-usbss0-pins-default { + pinctrl-single,pins = < + J721S2_IOPAD(0x0ec, PIN_OUTPUT, 6) /* (AG25) TIMER_IO1.USB0_DRVVBUS */ + >; + }; + + main_mcan6_pins_default: main-mcan6-pins-default { + pinctrl-single,pins = < + J721S2_IOPAD(0x098, PIN_INPUT, 0) /* (V25) MCASP0_AXR10.MCAN6_RX */ + J721S2_IOPAD(0x094, PIN_INPUT, 0) /* (AA25) MCASP0_AXR9.MCAN6_TX */ + >; + }; + + main_mcan7_pins_default: main-mcan7-pins-default { + pinctrl-single,pins = < + J721S2_IOPAD(0x0a0, PIN_INPUT, 0) /* (AB25) MCASP0_AXR12.MCAN7_RX */ + J721S2_IOPAD(0x09c, PIN_INPUT, 0) /* (T24) MCASP0_AXR11.MCAN7_TX */ + >; + }; +}; + +&wkup_pmx0 { + mcu_cpsw_pins_default: mcu-cpsw-pins-default { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x094, PIN_INPUT, 0) /* (B22) MCU_RGMII1_RD0 */ + J721S2_WKUP_IOPAD(0x090, PIN_INPUT, 0) /* (B21) MCU_RGMII1_RD1 */ + J721S2_WKUP_IOPAD(0x08c, PIN_INPUT, 0) /* (C22) MCU_RGMII1_RD2 */ + J721S2_WKUP_IOPAD(0x088, PIN_INPUT, 0) /* (D23) MCU_RGMII1_RD3 */ + J721S2_WKUP_IOPAD(0x084, PIN_INPUT, 0) /* (D22) MCU_RGMII1_RXC */ + J721S2_WKUP_IOPAD(0x06c, PIN_INPUT, 0) /* (E23) MCU_RGMII1_RX_CTL */ + J721S2_WKUP_IOPAD(0x07c, PIN_OUTPUT, 0) /* (F23) MCU_RGMII1_TD0 */ + J721S2_WKUP_IOPAD(0x078, PIN_OUTPUT, 0) /* (G22) MCU_RGMII1_TD1 */ + J721S2_WKUP_IOPAD(0x074, PIN_OUTPUT, 0) /* (E21) MCU_RGMII1_TD2 */ + J721S2_WKUP_IOPAD(0x070, PIN_OUTPUT, 0) /* (E22) MCU_RGMII1_TD3 */ + J721S2_WKUP_IOPAD(0x080, PIN_OUTPUT, 0) /* (F21) MCU_RGMII1_TXC */ + J721S2_WKUP_IOPAD(0x068, PIN_OUTPUT, 0) /* (F22) MCU_RGMII1_TX_CTL */ + >; + }; + + mcu_mdio_pins_default: mcu-mdio-pins-default { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x09c, PIN_OUTPUT, 0) /* (A21) MCU_MDIO0_MDC */ + J721S2_WKUP_IOPAD(0x098, PIN_INPUT, 0) /* (A22) MCU_MDIO0_MDIO */ + >; + }; + + mcu_mcan0_pins_default: mcu-mcan0-pins-default { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x0bc, PIN_INPUT, 0) /* (E28) MCU_MCAN0_RX */ + J721S2_WKUP_IOPAD(0x0b8, PIN_OUTPUT, 0) /* (E27) MCU_MCAN0_TX */ + >; + }; + + mcu_mcan1_pins_default: mcu-mcan1-pins-default { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x0d4, PIN_INPUT, 0) /* (F26) WKUP_GPIO0_5.MCU_MCAN1_RX */ + J721S2_WKUP_IOPAD(0x0d0, PIN_OUTPUT, 0) /* (C23) WKUP_GPIO0_4.MCU_MCAN1_TX*/ + >; + }; + + mcu_i2c1_pins_default: mcu-i2c1-pins-default { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x0e0, PIN_INPUT, 0) /* (F24) WKUP_GPIO0_8.MCU_I2C1_SCL */ + J721S2_WKUP_IOPAD(0x0e4, PIN_INPUT, 0) /* (H26) WKUP_GPIO0_9.MCU_I2C1_SDA */ + >; + }; +}; + +&main_gpio2 { + status = "disabled"; +}; + +&main_gpio4 { + status = "disabled"; +}; + +&main_gpio6 { + status = "disabled"; +}; + +&wkup_gpio0 { + status = "disabled"; +}; + +&wkup_gpio1 { + status = "disabled"; +}; + +&wkup_uart0 { + status = "reserved"; +}; + +&main_uart8 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_uart8_pins_default>; + /* Shared with TFA on this platform */ + power-domains = <&k3_pds 357 TI_SCI_PD_SHARED>; +}; + +&main_i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c0_pins_default>; + clock-frequency = <400000>; + + exp1: gpio@21 { + compatible = "ti,tca6416"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "CSI_VIO_SEL", "CSI_SEL_FPC_EXPn", "HDMI_PDn", + "HDMI_LS_OE", "DP0_3V3 _EN", "BOARDID_EEPROM_WP", + "CAN_STB", " ", "GPIO_uSD_PWR_EN", "eDP_ENABLE", + "IO_EXP_PCIe1_M.2_RTSz", "IO_EXP_MCU_RGMII_RSTz", + "IO_EXP_CSI2_EXP_RSTz", " ", "CSI0_B_GPIO1", + "CSI1_B_GPIO1"; + }; +}; + +&main_sdhci0 { + /* Unused */ + status = "disabled"; +}; + +&main_sdhci1 { + /* SD card */ + pinctrl-0 = <&main_mmc1_pins_default>; + pinctrl-names = "default"; + disable-wp; + vmmc-supply = <&vdd_mmc1>; + vqmmc-supply = <&vdd_sd_dv>; +}; + +&mcu_cpsw { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>; +}; + +&davinci_mdio { + phy0: ethernet-phy@0 { + reg = <0>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,min-output-impedance; + }; +}; + +&cpsw_port1 { + phy-mode = "rgmii-rxid"; + phy-handle = <&phy0>; +}; + +&mcu_mcan0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_mcan0_pins_default>; + phys = <&transceiver1>; +}; + +&mcu_mcan1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_mcan1_pins_default>; + phys = <&transceiver2>; +}; + +&main_mcan6 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_mcan6_pins_default>; + phys = <&transceiver3>; +}; + +&main_mcan7 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_mcan7_pins_default>; + phys = <&transceiver4>; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi b/arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi new file mode 100644 index 000000000000..e92431250729 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; + +#include "k3-j721s2.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + memory@80000000 { + device_type = "memory"; + /* 16 GB RAM */ + reg = <0x00 0x80000000 0x00 0x80000000>, + <0x08 0x80000000 0x03 0x80000000>; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + secure_ddr: optee@9e800000 { + reg = <0x00 0x9e800000 0x00 0x01800000>; + no-map; + }; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am69-sk.dts b/arch/arm64/boot/dts/ti/k3-am69-sk.dts new file mode 100644 index 000000000000..bc49ba534790 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am69-sk.dts @@ -0,0 +1,180 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2022-2023 Texas Instruments Incorporated - https://www.ti.com/ + * + * Design Files: https://www.ti.com/lit/zip/SPRR466 + * TRM: https://www.ti.com/lit/zip/spruj52 + */ + +/dts-v1/; + +#include <dt-bindings/net/ti-dp83867.h> +#include <dt-bindings/gpio/gpio.h> +#include "k3-j784s4.dtsi" + +/ { + compatible = "ti,am69-sk", "ti,j784s4"; + model = "Texas Instruments AM69 SK"; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + aliases { + serial2 = &main_uart8; + mmc1 = &main_sdhci1; + i2c0 = &main_i2c0; + }; + + memory@80000000 { + device_type = "memory"; + /* 32G RAM */ + reg = <0x00 0x80000000 0x00 0x80000000>, + <0x08 0x80000000 0x07 0x80000000>; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + secure_ddr: optee@9e800000 { + reg = <0x00 0x9e800000 0x00 0x01800000>; + no-map; + }; + }; + + vusb_main: regulator-vusb-main5v0 { + /* USB MAIN INPUT 5V DC */ + compatible = "regulator-fixed"; + regulator-name = "vusb-main5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + vsys_5v0: regulator-vsys5v0 { + /* Output of LM61460 */ + compatible = "regulator-fixed"; + regulator-name = "vsys_5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vusb_main>; + regulator-always-on; + regulator-boot-on; + }; + + vsys_3v3: regulator-vsys3v3 { + /* Output of LM5143 */ + compatible = "regulator-fixed"; + regulator-name = "vsys_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vusb_main>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_mmc1: regulator-sd { + /* Output of TPS22918 */ + compatible = "regulator-fixed"; + regulator-name = "vdd_mmc1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + enable-active-high; + vin-supply = <&vsys_3v3>; + gpio = <&exp1 2 GPIO_ACTIVE_HIGH>; + }; + + vdd_sd_dv: regulator-tlv71033 { + /* Output of TLV71033 */ + compatible = "regulator-gpio"; + regulator-name = "tlv71033"; + pinctrl-names = "default"; + pinctrl-0 = <&vdd_sd_dv_pins_default>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + vin-supply = <&vsys_5v0>; + gpios = <&main_gpio0 49 GPIO_ACTIVE_HIGH>; + states = <1800000 0x0>, + <3300000 0x1>; + }; +}; + +&main_pmx0 { + main_uart8_pins_default: main-uart8-pins-default { + pinctrl-single,pins = < + J784S4_IOPAD(0x0d0, PIN_INPUT, 11) /* (AP38) SPI0_CS1.UART8_RXD */ + J784S4_IOPAD(0x0d4, PIN_OUTPUT, 11) /* (AN38) SPI0_CLK.UART8_TXD */ + >; + }; + + main_i2c0_pins_default: main-i2c0-pins-default { + pinctrl-single,pins = < + J784S4_IOPAD(0x0e0, PIN_INPUT_PULLUP, 0) /* (AN36) I2C0_SCL */ + J784S4_IOPAD(0x0e4, PIN_INPUT_PULLUP, 0) /* (AP37) I2C0_SDA */ + >; + }; + + main_mmc1_pins_default: main-mmc1-pins-default { + pinctrl-single,pins = < + J784S4_IOPAD(0x104, PIN_INPUT, 0) /* (AB38) MMC1_CLK */ + J784S4_IOPAD(0x108, PIN_INPUT, 0) /* (AB36) MMC1_CMD */ + J784S4_IOPAD(0x100, PIN_INPUT, 0) /* (No Pin) MMC1_CLKLB */ + J784S4_IOPAD(0x0fc, PIN_INPUT, 0) /* (AA33) MMC1_DAT0 */ + J784S4_IOPAD(0x0f8, PIN_INPUT, 0) /* (AB34) MMC1_DAT1 */ + J784S4_IOPAD(0x0f4, PIN_INPUT, 0) /* (AA32) MMC1_DAT2 */ + J784S4_IOPAD(0x0f0, PIN_INPUT, 0) /* (AC38) MMC1_DAT3 */ + J784S4_IOPAD(0x0e8, PIN_INPUT, 8) /* (AR38) TIMER_IO0.MMC1_SDCD */ + >; + }; + + vdd_sd_dv_pins_default: vdd-sd-dv-pins-default { + pinctrl-single,pins = < + J784S4_IOPAD(0x0C4, PIN_INPUT, 7) /* (AD36) ECAP0_IN_APWM_OUT.GPIO0_49 */ + >; + }; +}; + +&main_uart8 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_uart8_pins_default>; +}; + +&main_i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c0_pins_default>; + clock-frequency = <400000>; + + exp1: gpio@21 { + compatible = "ti,tca6416"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "BOARDID_EEPROM_WP", "CAN_STB", "GPIO_uSD_PWR_EN", + "IO_EXP_MCU_RGMII_RST#", "IO_EXP_PCIe0_4L_PERST#", + "IO_EXP_PCIe1_M.2_RTSz", "IO_EXP_PCIe3_M.2_RTSz", + "PM_INA_BUS_EN", "ENET1_EXP_PWRDN", "EXP1_ENET_RSTz", + "ENET1_I2CMUX_SEL", "PCIe0_CLKREQ#", "PCIe1_M.2_CLKREQ#", + "PCIe3_M2_CLKREQ#", "PCIe0_PRSNT2#_1", "PCIe0_PRSNT2#_2"; + }; +}; + +&main_sdhci1 { + /* SD card */ + status = "okay"; + pinctrl-0 = <&main_mmc1_pins_default>; + pinctrl-names = "default"; + disable-wp; + vmmc-supply = <&vdd_mmc1>; + vqmmc-supply = <&vdd_sd_dv>; +}; + +&main_gpio0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts index 6240856e4863..0d39d6b8cc0c 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts +++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts @@ -80,7 +80,7 @@ }; }; -&wkup_pmx0 { +&wkup_pmx2 { mcu_cpsw_pins_default: mcu-cpsw-pins-default { pinctrl-single,pins = < J721E_WKUP_IOPAD(0x0068, PIN_OUTPUT, 0) /* MCU_RGMII1_TX_CTL */ diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi index fe669deba489..de56a0165bd0 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi @@ -56,7 +56,34 @@ wkup_pmx0: pinctrl@4301c000 { compatible = "pinctrl-single"; /* Proxy 0 addressing */ - reg = <0x00 0x4301c000 0x00 0x178>; + reg = <0x00 0x4301c000 0x00 0x34>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0xffffffff>; + }; + + wkup_pmx1: pinctrl@0x4301c038 { + compatible = "pinctrl-single"; + /* Proxy 0 addressing */ + reg = <0x00 0x4301c038 0x00 0x8>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0xffffffff>; + }; + + wkup_pmx2: pinctrl@0x4301c068 { + compatible = "pinctrl-single"; + /* Proxy 0 addressing */ + reg = <0x00 0x4301c068 0x00 0xec>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0xffffffff>; + }; + + wkup_pmx3: pinctrl@0x4301c174 { + compatible = "pinctrl-single"; + /* Proxy 0 addressing */ + reg = <0x00 0x4301c174 0x00 0x20>; #pinctrl-cells = <1>; pinctrl-single,register-width = <32>; pinctrl-single,function-mask = <0xffffffff>; diff --git a/arch/arm64/boot/dts/ti/k3-j7200.dtsi b/arch/arm64/boot/dts/ti/k3-j7200.dtsi index b6da0454cc5b..d74f86b0f622 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200.dtsi @@ -84,6 +84,7 @@ L2_0: l2-cache0 { compatible = "cache"; cache-level = <2>; + cache-unified; cache-size = <0x100000>; cache-line-size = <64>; cache-sets = <1024>; diff --git a/arch/arm64/boot/dts/ti/k3-j721e.dtsi b/arch/arm64/boot/dts/ti/k3-j721e.dtsi index 0e23886c9fd1..6975cae644d9 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e.dtsi @@ -86,6 +86,7 @@ L2_0: l2-cache0 { compatible = "cache"; cache-level = <2>; + cache-unified; cache-size = <0x100000>; cache-line-size = <64>; cache-sets = <1024>; diff --git a/arch/arm64/boot/dts/ti/k3-j721s2.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2.dtsi index 7b930a85a29d..78295ee0fee5 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721s2.dtsi @@ -69,6 +69,7 @@ L2_0: l2-cache0 { compatible = "cache"; + cache-unified; cache-level = <2>; cache-size = <0x100000>; cache-line-size = <64>; diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts new file mode 100644 index 000000000000..8cd4a7ecc121 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts @@ -0,0 +1,196 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/ + * + * EVM Board Schematics: https://www.ti.com/lit/zip/sprr458 + */ + +/dts-v1/; + +#include <dt-bindings/net/ti-dp83867.h> +#include <dt-bindings/gpio/gpio.h> +#include "k3-j784s4.dtsi" + +/ { + compatible = "ti,j784s4-evm", "ti,j784s4"; + model = "Texas Instruments J784S4 EVM"; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + aliases { + serial2 = &main_uart8; + mmc1 = &main_sdhci1; + i2c0 = &main_i2c0; + }; + + memory@80000000 { + device_type = "memory"; + /* 32G RAM */ + reg = <0x00 0x80000000 0x00 0x80000000>, + <0x08 0x80000000 0x07 0x80000000>; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + secure_ddr: optee@9e800000 { + reg = <0x00 0x9e800000 0x00 0x01800000>; + no-map; + }; + }; + + evm_12v0: regulator-evm12v0 { + /* main supply */ + compatible = "regulator-fixed"; + regulator-name = "evm_12v0"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + regulator-boot-on; + }; + + vsys_3v3: regulator-vsys3v3 { + /* Output of LM5140 */ + compatible = "regulator-fixed"; + regulator-name = "vsys_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&evm_12v0>; + regulator-always-on; + regulator-boot-on; + }; + + vsys_5v0: regulator-vsys5v0 { + /* Output of LM5140 */ + compatible = "regulator-fixed"; + regulator-name = "vsys_5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&evm_12v0>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_mmc1: regulator-sd { + /* Output of TPS22918 */ + compatible = "regulator-fixed"; + regulator-name = "vdd_mmc1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + enable-active-high; + vin-supply = <&vsys_3v3>; + gpio = <&exp2 2 GPIO_ACTIVE_HIGH>; + }; + + vdd_sd_dv: regulator-TLV71033 { + /* Output of TLV71033 */ + compatible = "regulator-gpio"; + regulator-name = "tlv71033"; + pinctrl-names = "default"; + pinctrl-0 = <&vdd_sd_dv_pins_default>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + vin-supply = <&vsys_5v0>; + gpios = <&main_gpio0 8 GPIO_ACTIVE_HIGH>; + states = <1800000 0x0>, + <3300000 0x1>; + }; +}; + +&main_pmx0 { + main_uart8_pins_default: main-uart8-pins-default { + pinctrl-single,pins = < + J784S4_IOPAD(0x040, PIN_INPUT, 14) /* (AF37) MCASP0_AXR0.UART8_CTSn */ + J784S4_IOPAD(0x044, PIN_OUTPUT, 14) /* (AG37) MCASP0_AXR1.UART8_RTSn */ + J784S4_IOPAD(0x0d0, PIN_INPUT, 11) /* (AP38) SPI0_CS1.UART8_RXD */ + J784S4_IOPAD(0x0d4, PIN_OUTPUT, 11) /* (AN38) SPI0_CLK.UART8_TXD */ + >; + }; + + main_i2c0_pins_default: main-i2c0-pins-default { + pinctrl-single,pins = < + J784S4_IOPAD(0x0e0, PIN_INPUT_PULLUP, 0) /* (AN36) I2C0_SCL */ + J784S4_IOPAD(0x0e4, PIN_INPUT_PULLUP, 0) /* (AP37) I2C0_SDA */ + >; + }; + + main_mmc1_pins_default: main-mmc1-pins-default { + pinctrl-single,pins = < + J784S4_IOPAD(0x104, PIN_INPUT, 0) /* (AB38) MMC1_CLK */ + J784S4_IOPAD(0x108, PIN_INPUT, 0) /* (AB36) MMC1_CMD */ + J784S4_IOPAD(0x100, PIN_INPUT, 0) /* (No Pin) MMC1_CLKLB */ + J784S4_IOPAD(0x0fc, PIN_INPUT, 0) /* (AA33) MMC1_DAT0 */ + J784S4_IOPAD(0x0f8, PIN_INPUT, 0) /* (AB34) MMC1_DAT1 */ + J784S4_IOPAD(0x0f4, PIN_INPUT, 0) /* (AA32) MMC1_DAT2 */ + J784S4_IOPAD(0x0f0, PIN_INPUT, 0) /* (AC38) MMC1_DAT3 */ + J784S4_IOPAD(0x0e8, PIN_INPUT, 8) /* (AR38) TIMER_IO0.MMC1_SDCD */ + >; + }; + + vdd_sd_dv_pins_default: vdd-sd-dv-pins-default { + pinctrl-single,pins = < + J784S4_IOPAD(0x020, PIN_INPUT, 7) /* (AJ35) MCAN15_RX.GPIO0_8 */ + >; + }; +}; + +&main_uart8 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_uart8_pins_default>; +}; + +&main_i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c0_pins_default>; + + clock-frequency = <400000>; + + exp1: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "PCIE1_2L_MODE_SEL", "PCIE1_4L_PERSTZ", "PCIE1_2L_RC_RSTZ", + "PCIE1_2L_EP_RST_EN", "PCIE0_4L_MODE_SEL", "PCIE0_4L_PERSTZ", + "PCIE0_4L_RC_RSTZ", "PCIE0_4L_EP_RST_EN", "PCIE1_4L_PRSNT#", + "PCIE0_4L_PRSNT#", "CDCI1_OE1/OE4", "CDCI1_OE2/OE3", + "AUDIO_MUX_SEL", "EXP_MUX2", "EXP_MUX3", "GESI_EXP_PHY_RSTZ"; + }; + + exp2: gpio@22 { + compatible = "ti,tca6424"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "R_GPIO_RGMII1_RST", "ENET2_I2CMUX_SEL", "GPIO_USD_PWR_EN", + "USBC_PWR_EN", "USBC_MODE_SEL1", "USBC_MODE_SEL0", + "GPIO_LIN_EN", "R_CAN_STB", "CTRL_PM_I2C_OE#", + "ENET2_EXP_PWRDN", "ENET2_EXP_SPARE2", "CDCI2_RSTZ", + "USB2.0_MUX_SEL", "CANUART_MUX_SEL0", "CANUART_MUX2_SEL1", + "CANUART_MUX1_SEL1", "ENET1_EXP_PWRDN", "ENET1_EXP_RESETZ", + "ENET1_I2CMUX_SEL", "ENET1_EXP_SPARE2", "ENET2_EXP_RESETZ", + "USER_INPUT1", "USER_LED1", "USER_LED2"; + }; +}; + +&main_sdhci1 { + /* SD card */ + status = "okay"; + pinctrl-0 = <&main_mmc1_pins_default>; + pinctrl-names = "default"; + disable-wp; + vmmc-supply = <&vdd_mmc1>; + vqmmc-supply = <&vdd_sd_dv>; +}; + +&main_gpio0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi new file mode 100644 index 000000000000..7edf324ac159 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi @@ -0,0 +1,1007 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for J784S4 SoC Family Main Domain peripherals + * + * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/ + */ + +&cbass_main { + msmc_ram: sram@70000000 { + compatible = "mmio-sram"; + reg = <0x00 0x70000000 0x00 0x800000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00 0x00 0x70000000 0x800000>; + + atf-sram@0 { + reg = <0x00 0x20000>; + }; + + tifs-sram@1f0000 { + reg = <0x1f0000 0x10000>; + }; + + l3cache-sram@200000 { + reg = <0x200000 0x200000>; + }; + }; + + gic500: interrupt-controller@1800000 { + compatible = "arm,gic-v3"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x00 0x01800000 0x00 0x200000>, /* GICD */ + <0x00 0x01900000 0x00 0x100000>, /* GICR */ + <0x00 0x6f000000 0x00 0x2000>, /* GICC */ + <0x00 0x6f010000 0x00 0x1000>, /* GICH */ + <0x00 0x6f020000 0x00 0x2000>; /* GICV */ + + /* vcpumntirq: virtual CPU interface maintenance interrupt */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + + gic_its: msi-controller@1820000 { + compatible = "arm,gic-v3-its"; + reg = <0x00 0x01820000 0x00 0x10000>; + socionext,synquacer-pre-its = <0x1000000 0x400000>; + msi-controller; + #msi-cells = <1>; + }; + }; + + main_gpio_intr: interrupt-controller@a00000 { + compatible = "ti,sci-intr"; + reg = <0x00 0x00a00000 0x00 0x800>; + ti,intr-trigger-type = <1>; + interrupt-controller; + interrupt-parent = <&gic500>; + #interrupt-cells = <1>; + ti,sci = <&sms>; + ti,sci-dev-id = <10>; + ti,interrupt-ranges = <8 360 56>; + }; + + main_pmx0: pinctrl@11c000 { + compatible = "pinctrl-single"; + /* Proxy 0 addressing */ + reg = <0x00 0x11c000 0x00 0x120>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0xffffffff>; + }; + + main_uart0: serial@2800000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02800000 0x00 0x200>; + interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; + current-speed = <115200>; + clocks = <&k3_clks 146 0>; + clock-names = "fclk"; + power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + }; + + main_uart1: serial@2810000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02810000 0x00 0x200>; + interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; + current-speed = <115200>; + clocks = <&k3_clks 388 0>; + clock-names = "fclk"; + power-domains = <&k3_pds 388 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + }; + + main_uart2: serial@2820000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02820000 0x00 0x200>; + interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>; + current-speed = <115200>; + clocks = <&k3_clks 389 0>; + clock-names = "fclk"; + power-domains = <&k3_pds 389 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + }; + + main_uart3: serial@2830000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02830000 0x00 0x200>; + interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>; + current-speed = <115200>; + clocks = <&k3_clks 390 0>; + clock-names = "fclk"; + power-domains = <&k3_pds 390 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + }; + + main_uart4: serial@2840000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02840000 0x00 0x200>; + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>; + current-speed = <115200>; + clocks = <&k3_clks 391 0>; + clock-names = "fclk"; + power-domains = <&k3_pds 391 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + }; + + main_uart5: serial@2850000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02850000 0x00 0x200>; + interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; + current-speed = <115200>; + clocks = <&k3_clks 392 0>; + clock-names = "fclk"; + power-domains = <&k3_pds 392 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + }; + + main_uart6: serial@2860000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02860000 0x00 0x200>; + interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>; + current-speed = <115200>; + clocks = <&k3_clks 393 0>; + clock-names = "fclk"; + power-domains = <&k3_pds 393 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + }; + + main_uart7: serial@2870000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02870000 0x00 0x200>; + interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>; + current-speed = <115200>; + clocks = <&k3_clks 394 0>; + clock-names = "fclk"; + power-domains = <&k3_pds 394 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + }; + + main_uart8: serial@2880000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02880000 0x00 0x200>; + interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>; + current-speed = <115200>; + clocks = <&k3_clks 395 0>; + clock-names = "fclk"; + power-domains = <&k3_pds 395 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + }; + + main_uart9: serial@2890000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02890000 0x00 0x200>; + interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>; + current-speed = <115200>; + clocks = <&k3_clks 396 0>; + clock-names = "fclk"; + power-domains = <&k3_pds 396 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + }; + + main_gpio0: gpio@600000 { + compatible = "ti,j721e-gpio", "ti,keystone-gpio"; + reg = <0x00 0x00600000 0x00 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&main_gpio_intr>; + interrupts = <145>, <146>, <147>, <148>, <149>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <66>; + ti,davinci-gpio-unbanked = <0>; + power-domains = <&k3_pds 163 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 163 0>; + clock-names = "gpio"; + status = "disabled"; + }; + + main_gpio2: gpio@610000 { + compatible = "ti,j721e-gpio", "ti,keystone-gpio"; + reg = <0x00 0x00610000 0x00 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&main_gpio_intr>; + interrupts = <154>, <155>, <156>, <157>, <158>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <66>; + ti,davinci-gpio-unbanked = <0>; + power-domains = <&k3_pds 164 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 164 0>; + clock-names = "gpio"; + status = "disabled"; + }; + + main_gpio4: gpio@620000 { + compatible = "ti,j721e-gpio", "ti,keystone-gpio"; + reg = <0x00 0x00620000 0x00 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&main_gpio_intr>; + interrupts = <163>, <164>, <165>, <166>, <167>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <66>; + ti,davinci-gpio-unbanked = <0>; + power-domains = <&k3_pds 165 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 165 0>; + clock-names = "gpio"; + status = "disabled"; + }; + + main_gpio6: gpio@630000 { + compatible = "ti,j721e-gpio", "ti,keystone-gpio"; + reg = <0x00 0x00630000 0x00 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&main_gpio_intr>; + interrupts = <172>, <173>, <174>, <175>, <176>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <66>; + ti,davinci-gpio-unbanked = <0>; + power-domains = <&k3_pds 166 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 166 0>; + clock-names = "gpio"; + status = "disabled"; + }; + + main_i2c0: i2c@2000000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x00 0x02000000 0x00 0x100>; + interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&k3_clks 270 2>; + clock-names = "fck"; + power-domains = <&k3_pds 270 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + }; + + main_i2c1: i2c@2010000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x00 0x02010000 0x00 0x100>; + interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&k3_clks 271 2>; + clock-names = "fck"; + power-domains = <&k3_pds 271 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + }; + + main_i2c2: i2c@2020000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x00 0x02020000 0x00 0x100>; + interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&k3_clks 272 2>; + clock-names = "fck"; + power-domains = <&k3_pds 272 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + }; + + main_i2c3: i2c@2030000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x00 0x02030000 0x00 0x100>; + interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&k3_clks 273 2>; + clock-names = "fck"; + power-domains = <&k3_pds 273 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + }; + + main_i2c4: i2c@2040000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x00 0x02040000 0x00 0x100>; + interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&k3_clks 274 2>; + clock-names = "fck"; + power-domains = <&k3_pds 274 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + }; + + main_i2c5: i2c@2050000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x00 0x02050000 0x00 0x100>; + interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&k3_clks 275 2>; + clock-names = "fck"; + power-domains = <&k3_pds 275 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + }; + + main_i2c6: i2c@2060000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x00 0x02060000 0x00 0x100>; + interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&k3_clks 276 2>; + clock-names = "fck"; + power-domains = <&k3_pds 276 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + }; + + main_sdhci0: mmc@4f80000 { + compatible = "ti,j721e-sdhci-8bit"; + reg = <0x00 0x04f80000 0x00 0x1000>, + <0x00 0x04f88000 0x00 0x400>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 140 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 140 1>, <&k3_clks 140 2>; + clock-names = "clk_ahb", "clk_xin"; + assigned-clocks = <&k3_clks 140 2>; + assigned-clock-parents = <&k3_clks 140 3>; + bus-width = <8>; + ti,otap-del-sel-legacy = <0x0>; + ti,otap-del-sel-mmc-hs = <0x0>; + ti,otap-del-sel-ddr52 = <0x6>; + ti,otap-del-sel-hs200 = <0x8>; + ti,otap-del-sel-hs400 = <0x5>; + ti,itap-del-sel-legacy = <0x10>; + ti,itap-del-sel-mmc-hs = <0xa>; + ti,strobe-sel = <0x77>; + ti,clkbuf-sel = <0x7>; + ti,trm-icp = <0x8>; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + dma-coherent; + no-1-8-v; + status = "disabled"; + }; + + main_sdhci1: mmc@4fb0000 { + compatible = "ti,j721e-sdhci-4bit"; + reg = <0x00 0x04fb0000 0x00 0x1000>, + <0x00 0x04fb8000 0x00 0x400>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 141 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 141 3>, <&k3_clks 141 4>; + clock-names = "clk_ahb", "clk_xin"; + assigned-clocks = <&k3_clks 141 4>; + assigned-clock-parents = <&k3_clks 141 5>; + bus-width = <4>; + ti,otap-del-sel-legacy = <0x0>; + ti,otap-del-sel-sd-hs = <0x0>; + ti,otap-del-sel-sdr12 = <0xf>; + ti,otap-del-sel-sdr25 = <0xf>; + ti,otap-del-sel-sdr50 = <0xc>; + ti,otap-del-sel-sdr104 = <0x5>; + ti,otap-del-sel-ddr50 = <0xc>; + ti,itap-del-sel-legacy = <0x0>; + ti,itap-del-sel-sd-hs = <0x0>; + ti,itap-del-sel-sdr12 = <0x0>; + ti,itap-del-sel-sdr25 = <0x0>; + ti,clkbuf-sel = <0x7>; + ti,trm-icp = <0x8>; + dma-coherent; + sdhci-caps-mask = <0x00000003 0x00000000>; + no-1-8-v; + status = "disabled"; + }; + + main_navss: bus@30000000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>; + dma-coherent; + dma-ranges; + + main_navss_intr: interrupt-controller@310e0000 { + compatible = "ti,sci-intr"; + reg = <0x00 0x310e0000 0x00 0x4000>; + ti,intr-trigger-type = <4>; + interrupt-controller; + interrupt-parent = <&gic500>; + #interrupt-cells = <1>; + ti,sci = <&sms>; + ti,sci-dev-id = <283>; + ti,interrupt-ranges = <0 64 64>, + <64 448 64>, + <128 672 64>; + }; + + main_udmass_inta: msi-controller@33d00000 { + compatible = "ti,sci-inta"; + reg = <0x00 0x33d00000 0x00 0x100000>; + interrupt-controller; + #interrupt-cells = <0>; + interrupt-parent = <&main_navss_intr>; + msi-controller; + ti,sci = <&sms>; + ti,sci-dev-id = <321>; + ti,interrupt-ranges = <0 0 256>; + }; + + secure_proxy_main: mailbox@32c00000 { + compatible = "ti,am654-secure-proxy"; + #mbox-cells = <1>; + reg-names = "target_data", "rt", "scfg"; + reg = <0x00 0x32c00000 0x00 0x100000>, + <0x00 0x32400000 0x00 0x100000>, + <0x00 0x32800000 0x00 0x100000>; + interrupt-names = "rx_011"; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + }; + + hwspinlock: hwlock@30e00000 { + compatible = "ti,am654-hwspinlock"; + reg = <0x00 0x30e00000 0x00 0x1000>; + #hwlock-cells = <1>; + }; + + mailbox0_cluster0: mailbox@31f80000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f80000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + status = "disabled"; + }; + + mailbox0_cluster1: mailbox@31f81000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f81000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + status = "disabled"; + }; + + mailbox0_cluster2: mailbox@31f82000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f82000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + status = "disabled"; + }; + + mailbox0_cluster3: mailbox@31f83000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f83000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + status = "disabled"; + }; + + mailbox0_cluster4: mailbox@31f84000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f84000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + status = "disabled"; + }; + + mailbox0_cluster5: mailbox@31f85000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f85000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + status = "disabled"; + }; + + mailbox0_cluster6: mailbox@31f86000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f86000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + status = "disabled"; + }; + + mailbox0_cluster7: mailbox@31f87000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f87000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + status = "disabled"; + }; + + mailbox0_cluster8: mailbox@31f88000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f88000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + status = "disabled"; + }; + + mailbox0_cluster9: mailbox@31f89000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f89000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + status = "disabled"; + }; + + mailbox0_cluster10: mailbox@31f8a000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f8a000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + status = "disabled"; + }; + + mailbox0_cluster11: mailbox@31f8b000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f8b000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + status = "disabled"; + }; + + mailbox1_cluster0: mailbox@31f90000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f90000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + status = "disabled"; + }; + + mailbox1_cluster1: mailbox@31f91000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f91000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + status = "disabled"; + }; + + mailbox1_cluster2: mailbox@31f92000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f92000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + status = "disabled"; + }; + + mailbox1_cluster3: mailbox@31f93000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f93000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + status = "disabled"; + }; + + mailbox1_cluster4: mailbox@31f94000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f94000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + status = "disabled"; + }; + + mailbox1_cluster5: mailbox@31f95000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f95000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + status = "disabled"; + }; + + mailbox1_cluster6: mailbox@31f96000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f96000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + status = "disabled"; + }; + + mailbox1_cluster7: mailbox@31f97000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f97000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + status = "disabled"; + }; + + mailbox1_cluster8: mailbox@31f98000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f98000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + status = "disabled"; + }; + + mailbox1_cluster9: mailbox@31f99000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f99000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + status = "disabled"; + }; + + mailbox1_cluster10: mailbox@31f9a000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f9a000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + status = "disabled"; + }; + + mailbox1_cluster11: mailbox@31f9b000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f9b000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + status = "disabled"; + }; + + main_ringacc: ringacc@3c000000 { + compatible = "ti,am654-navss-ringacc"; + reg = <0x00 0x3c000000 0x00 0x400000>, + <0x00 0x38000000 0x00 0x400000>, + <0x00 0x31120000 0x00 0x100>, + <0x00 0x33000000 0x00 0x40000>; + reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target"; + ti,num-rings = <1024>; + ti,sci-rm-range-gp-rings = <0x1>; + ti,sci = <&sms>; + ti,sci-dev-id = <315>; + msi-parent = <&main_udmass_inta>; + }; + + main_udmap: dma-controller@31150000 { + compatible = "ti,j721e-navss-main-udmap"; + reg = <0x00 0x31150000 0x00 0x100>, + <0x00 0x34000000 0x00 0x80000>, + <0x00 0x35000000 0x00 0x200000>; + reg-names = "gcfg", "rchanrt", "tchanrt"; + msi-parent = <&main_udmass_inta>; + #dma-cells = <1>; + + ti,sci = <&sms>; + ti,sci-dev-id = <319>; + ti,ringacc = <&main_ringacc>; + + ti,sci-rm-range-tchan = <0x0d>, /* TX_CHAN */ + <0x0f>, /* TX_HCHAN */ + <0x10>; /* TX_UHCHAN */ + ti,sci-rm-range-rchan = <0x0a>, /* RX_CHAN */ + <0x0b>, /* RX_HCHAN */ + <0x0c>; /* RX_UHCHAN */ + ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */ + }; + + cpts@310d0000 { + compatible = "ti,j721e-cpts"; + reg = <0x00 0x310d0000 0x00 0x400>; + reg-names = "cpts"; + clocks = <&k3_clks 282 0>; + clock-names = "cpts"; + assigned-clocks = <&k3_clks 62 3>; /* CPTS_RFT_CLK */ + assigned-clock-parents = <&k3_clks 62 5>; /* MAIN_0_HSDIV6_CLK */ + interrupts-extended = <&main_navss_intr 391>; + interrupt-names = "cpts"; + ti,cpts-periodic-outputs = <6>; + ti,cpts-ext-ts-inputs = <8>; + }; + }; + + main_mcan0: can@2701000 { + compatible = "bosch,m_can"; + reg = <0x00 0x02701000 0x00 0x200>, + <0x00 0x02708000 0x00 0x8000>; + reg-names = "m_can", "message_ram"; + power-domains = <&k3_pds 245 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 245 6>, <&k3_clks 245 1>; + clock-names = "hclk", "cclk"; + interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>; + status = "disabled"; + }; + + main_mcan1: can@2711000 { + compatible = "bosch,m_can"; + reg = <0x00 0x02711000 0x00 0x200>, + <0x00 0x02718000 0x00 0x8000>; + reg-names = "m_can", "message_ram"; + power-domains = <&k3_pds 246 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 246 6>, <&k3_clks 246 1>; + clock-names = "hclk", "cclk"; + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>; + status = "disabled"; + }; + + main_mcan2: can@2721000 { + compatible = "bosch,m_can"; + reg = <0x00 0x02721000 0x00 0x200>, + <0x00 0x02728000 0x00 0x8000>; + reg-names = "m_can", "message_ram"; + power-domains = <&k3_pds 247 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 247 6>, <&k3_clks 247 1>; + clock-names = "hclk", "cclk"; + interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>; + status = "disabled"; + }; + + main_mcan3: can@2731000 { + compatible = "bosch,m_can"; + reg = <0x00 0x02731000 0x00 0x200>, + <0x00 0x02738000 0x00 0x8000>; + reg-names = "m_can", "message_ram"; + power-domains = <&k3_pds 248 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 248 6>, <&k3_clks 248 1>; + clock-names = "hclk", "cclk"; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>; + status = "disabled"; + }; + + main_mcan4: can@2741000 { + compatible = "bosch,m_can"; + reg = <0x00 0x02741000 0x00 0x200>, + <0x00 0x02748000 0x00 0x8000>; + reg-names = "m_can", "message_ram"; + power-domains = <&k3_pds 249 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 249 6>, <&k3_clks 249 1>; + clock-names = "hclk", "cclk"; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>; + status = "disabled"; + }; + + main_mcan5: can@2751000 { + compatible = "bosch,m_can"; + reg = <0x00 0x02751000 0x00 0x200>, + <0x00 0x02758000 0x00 0x8000>; + reg-names = "m_can", "message_ram"; + power-domains = <&k3_pds 250 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 250 6>, <&k3_clks 250 1>; + clock-names = "hclk", "cclk"; + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>; + status = "disabled"; + }; + + main_mcan6: can@2761000 { + compatible = "bosch,m_can"; + reg = <0x00 0x02761000 0x00 0x200>, + <0x00 0x02768000 0x00 0x8000>; + reg-names = "m_can", "message_ram"; + power-domains = <&k3_pds 251 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 251 6>, <&k3_clks 251 1>; + clock-names = "hclk", "cclk"; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>; + status = "disabled"; + }; + + main_mcan7: can@2771000 { + compatible = "bosch,m_can"; + reg = <0x00 0x02771000 0x00 0x200>, + <0x00 0x02778000 0x00 0x8000>; + reg-names = "m_can", "message_ram"; + power-domains = <&k3_pds 252 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 252 6>, <&k3_clks 252 1>; + clock-names = "hclk", "cclk"; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>; + status = "disabled"; + }; + + main_mcan8: can@2781000 { + compatible = "bosch,m_can"; + reg = <0x00 0x02781000 0x00 0x200>, + <0x00 0x02788000 0x00 0x8000>; + reg-names = "m_can", "message_ram"; + power-domains = <&k3_pds 253 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 253 6>, <&k3_clks 253 1>; + clock-names = "hclk", "cclk"; + interrupts = <GIC_SPI 576 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 577 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>; + status = "disabled"; + }; + + main_mcan9: can@2791000 { + compatible = "bosch,m_can"; + reg = <0x00 0x02791000 0x00 0x200>, + <0x00 0x02798000 0x00 0x8000>; + reg-names = "m_can", "message_ram"; + power-domains = <&k3_pds 254 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 254 6>, <&k3_clks 254 1>; + clock-names = "hclk", "cclk"; + interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 580 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>; + status = "disabled"; + }; + + main_mcan10: can@27a1000 { + compatible = "bosch,m_can"; + reg = <0x00 0x027a1000 0x00 0x200>, + <0x00 0x027a8000 0x00 0x8000>; + reg-names = "m_can", "message_ram"; + power-domains = <&k3_pds 255 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 255 6>, <&k3_clks 255 1>; + clock-names = "hclk", "cclk"; + interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>; + status = "disabled"; + }; + + main_mcan11: can@27b1000 { + compatible = "bosch,m_can"; + reg = <0x00 0x027b1000 0x00 0x200>, + <0x00 0x027b8000 0x00 0x8000>; + reg-names = "m_can", "message_ram"; + power-domains = <&k3_pds 256 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 256 6>, <&k3_clks 256 1>; + clock-names = "hclk", "cclk"; + interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>; + status = "disabled"; + }; + + main_mcan12: can@27c1000 { + compatible = "bosch,m_can"; + reg = <0x00 0x027c1000 0x00 0x200>, + <0x00 0x027c8000 0x00 0x8000>; + reg-names = "m_can", "message_ram"; + power-domains = <&k3_pds 257 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 257 6>, <&k3_clks 257 1>; + clock-names = "hclk", "cclk"; + interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>; + status = "disabled"; + }; + + main_mcan13: can@27d1000 { + compatible = "bosch,m_can"; + reg = <0x00 0x027d1000 0x00 0x200>, + <0x00 0x027d8000 0x00 0x8000>; + reg-names = "m_can", "message_ram"; + power-domains = <&k3_pds 258 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 258 6>, <&k3_clks 258 1>; + clock-names = "hclk", "cclk"; + interrupts = <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>; + status = "disabled"; + }; + + main_mcan14: can@2681000 { + compatible = "bosch,m_can"; + reg = <0x00 0x02681000 0x00 0x200>, + <0x00 0x02688000 0x00 0x8000>; + reg-names = "m_can", "message_ram"; + power-domains = <&k3_pds 259 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 259 6>, <&k3_clks 259 1>; + clock-names = "hclk", "cclk"; + interrupts = <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>; + status = "disabled"; + }; + + main_mcan15: can@2691000 { + compatible = "bosch,m_can"; + reg = <0x00 0x02691000 0x00 0x200>, + <0x00 0x02698000 0x00 0x8000>; + reg-names = "m_can", "message_ram"; + power-domains = <&k3_pds 260 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 260 6>, <&k3_clks 260 1>; + clock-names = "hclk", "cclk"; + interrupts = <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>; + status = "disabled"; + }; + + main_mcan16: can@26a1000 { + compatible = "bosch,m_can"; + reg = <0x00 0x026a1000 0x00 0x200>, + <0x00 0x026a8000 0x00 0x8000>; + reg-names = "m_can", "message_ram"; + power-domains = <&k3_pds 261 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 261 6>, <&k3_clks 261 1>; + clock-names = "hclk", "cclk"; + interrupts = <GIC_SPI 784 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 785 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>; + status = "disabled"; + }; + + main_mcan17: can@26b1000 { + compatible = "bosch,m_can"; + reg = <0x00 0x026b1000 0x00 0x200>, + <0x00 0x026b8000 0x00 0x8000>; + reg-names = "m_can", "message_ram"; + power-domains = <&k3_pds 262 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 262 6>, <&k3_clks 262 1>; + clock-names = "hclk", "cclk"; + interrupts = <GIC_SPI 787 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 788 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>; + status = "disabled"; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi new file mode 100644 index 000000000000..93952af618f6 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi @@ -0,0 +1,311 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for J784S4 SoC Family MCU/WAKEUP Domain peripherals + * + * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/ + */ + +&cbass_mcu_wakeup { + sms: system-controller@44083000 { + compatible = "ti,k2g-sci"; + ti,host-id = <12>; + + mbox-names = "rx", "tx"; + + mboxes = <&secure_proxy_main 11>, + <&secure_proxy_main 13>; + + reg-names = "debug_messages"; + reg = <0x00 0x44083000 0x00 0x1000>; + + k3_pds: power-controller { + compatible = "ti,sci-pm-domain"; + #power-domain-cells = <2>; + }; + + k3_clks: clock-controller { + compatible = "ti,k2g-sci-clk"; + #clock-cells = <2>; + }; + + k3_reset: reset-controller { + compatible = "ti,sci-reset"; + #reset-cells = <2>; + }; + }; + + chipid@43000014 { + compatible = "ti,am654-chipid"; + reg = <0x00 0x43000014 0x00 0x4>; + }; + + mcu_ram: sram@41c00000 { + compatible = "mmio-sram"; + reg = <0x00 0x41c00000 0x00 0x100000>; + ranges = <0x00 0x00 0x41c00000 0x100000>; + #address-cells = <1>; + #size-cells = <1>; + }; + + wkup_pmx0: pinctrl@4301c000 { + compatible = "pinctrl-single"; + /* Proxy 0 addressing */ + reg = <0x00 0x4301c000 0x00 0x178>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0xffffffff>; + }; + + wkup_gpio_intr: interrupt-controller@42200000 { + compatible = "ti,sci-intr"; + reg = <0x00 0x42200000 0x00 0x400>; + ti,intr-trigger-type = <1>; + interrupt-controller; + interrupt-parent = <&gic500>; + #interrupt-cells = <1>; + ti,sci = <&sms>; + ti,sci-dev-id = <177>; + ti,interrupt-ranges = <16 928 16>; + }; + + mcu_conf: syscon@40f00000 { + compatible = "ti,j721e-system-controller", "syscon", "simple-mfd"; + reg = <0x00 0x40f00000 0x00 0x20000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00 0x00 0x40f00000 0x20000>; + + phy_gmii_sel: phy@4040 { + compatible = "ti,am654-phy-gmii-sel"; + reg = <0x4040 0x4>; + #phy-cells = <1>; + }; + }; + + wkup_uart0: serial@42300000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x42300000 0x00 0x200>; + interrupts = <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>; + current-speed = <115200>; + clocks = <&k3_clks 397 0>; + clock-names = "fclk"; + power-domains = <&k3_pds 397 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + }; + + mcu_uart0: serial@40a00000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x40a00000 0x00 0x200>; + interrupts = <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>; + current-speed = <115200>; + clocks = <&k3_clks 149 0>; + clock-names = "fclk"; + power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + }; + + wkup_gpio0: gpio@42110000 { + compatible = "ti,j721e-gpio", "ti,keystone-gpio"; + reg = <0x00 0x42110000 0x00 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&wkup_gpio_intr>; + interrupts = <103>, <104>, <105>, <106>, <107>, <108>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <89>; + ti,davinci-gpio-unbanked = <0>; + power-domains = <&k3_pds 167 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 167 0>; + clock-names = "gpio"; + status = "disabled"; + }; + + wkup_gpio1: gpio@42100000 { + compatible = "ti,j721e-gpio", "ti,keystone-gpio"; + reg = <0x00 0x42100000 0x00 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&wkup_gpio_intr>; + interrupts = <112>, <113>, <114>, <115>, <116>, <117>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <89>; + ti,davinci-gpio-unbanked = <0>; + power-domains = <&k3_pds 168 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 168 0>; + clock-names = "gpio"; + status = "disabled"; + }; + + wkup_i2c0: i2c@42120000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x00 0x42120000 0x00 0x100>; + interrupts = <GIC_SPI 896 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&k3_clks 279 2>; + clock-names = "fck"; + power-domains = <&k3_pds 279 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + }; + + mcu_i2c0: i2c@40b00000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x00 0x40b00000 0x00 0x100>; + interrupts = <GIC_SPI 852 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&k3_clks 277 2>; + clock-names = "fck"; + power-domains = <&k3_pds 277 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + }; + + mcu_i2c1: i2c@40b10000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x00 0x40b10000 0x00 0x100>; + interrupts = <GIC_SPI 853 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&k3_clks 278 2>; + clock-names = "fck"; + power-domains = <&k3_pds 278 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + }; + + mcu_mcan0: can@40528000 { + compatible = "bosch,m_can"; + reg = <0x00 0x40528000 0x00 0x200>, + <0x00 0x40500000 0x00 0x8000>; + reg-names = "m_can", "message_ram"; + power-domains = <&k3_pds 263 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 263 6>, <&k3_clks 263 1>; + clock-names = "hclk", "cclk"; + interrupts = <GIC_SPI 832 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 833 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>; + status = "disabled"; + }; + + mcu_mcan1: can@40568000 { + compatible = "bosch,m_can"; + reg = <0x00 0x40568000 0x00 0x200>, + <0x00 0x40540000 0x00 0x8000>; + reg-names = "m_can", "message_ram"; + power-domains = <&k3_pds 264 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 264 6>, <&k3_clks 264 1>; + clock-names = "hclk", "cclk"; + interrupts = <GIC_SPI 835 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>; + status = "disabled"; + }; + + mcu_navss: bus@28380000{ + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>; + dma-coherent; + dma-ranges; + + mcu_ringacc: ringacc@2b800000 { + compatible = "ti,am654-navss-ringacc"; + reg = <0x00 0x2b800000 0x00 0x400000>, + <0x00 0x2b000000 0x00 0x400000>, + <0x00 0x28590000 0x00 0x100>, + <0x00 0x2a500000 0x00 0x40000>; + reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target"; + ti,num-rings = <286>; + ti,sci-rm-range-gp-rings = <0x1>; + ti,sci = <&sms>; + ti,sci-dev-id = <328>; + msi-parent = <&main_udmass_inta>; + }; + + mcu_udmap: dma-controller@285c0000 { + compatible = "ti,j721e-navss-mcu-udmap"; + reg = <0x00 0x285c0000 0x00 0x100>, + <0x00 0x2a800000 0x00 0x40000>, + <0x00 0x2aa00000 0x00 0x40000>; + reg-names = "gcfg", "rchanrt", "tchanrt"; + msi-parent = <&main_udmass_inta>; + #dma-cells = <1>; + + ti,sci = <&sms>; + ti,sci-dev-id = <329>; + ti,ringacc = <&mcu_ringacc>; + ti,sci-rm-range-tchan = <0x0d>, /* TX_CHAN */ + <0x0f>; /* TX_HCHAN */ + ti,sci-rm-range-rchan = <0x0a>, /* RX_CHAN */ + <0x0b>; /* RX_HCHAN */ + ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */ + }; + }; + + mcu_cpsw: ethernet@46000000 { + compatible = "ti,j721e-cpsw-nuss"; + #address-cells = <2>; + #size-cells = <2>; + reg = <0x00 0x46000000 0x00 0x200000>; + reg-names = "cpsw_nuss"; + ranges = <0x00 0x00 0x00 0x46000000 0x00 0x200000>; + dma-coherent; + clocks = <&k3_clks 63 0>; + clock-names = "fck"; + power-domains = <&k3_pds 63 TI_SCI_PD_EXCLUSIVE>; + + dmas = <&mcu_udmap 0xf000>, + <&mcu_udmap 0xf001>, + <&mcu_udmap 0xf002>, + <&mcu_udmap 0xf003>, + <&mcu_udmap 0xf004>, + <&mcu_udmap 0xf005>, + <&mcu_udmap 0xf006>, + <&mcu_udmap 0xf007>, + <&mcu_udmap 0x7000>; + dma-names = "tx0", "tx1", "tx2", "tx3", + "tx4", "tx5", "tx6", "tx7", + "rx"; + status = "disabled"; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + mcu_cpsw_port1: port@1 { + reg = <1>; + ti,mac-only; + label = "port1"; + ti,syscon-efuse = <&mcu_conf 0x200>; + phys = <&phy_gmii_sel 1>; + }; + }; + + davinci_mdio: mdio@f00 { + compatible = "ti,cpsw-mdio","ti,davinci_mdio"; + reg = <0x00 0xf00 0x00 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&k3_clks 63 0>; + clock-names = "fck"; + bus_freq = <1000000>; + }; + + cpts@3d000 { + compatible = "ti,am65-cpts"; + reg = <0x00 0x3d000 0x00 0x400>; + clocks = <&k3_clks 63 3>; + clock-names = "cpts"; + assigned-clocks = <&k3_clks 63 3>; /* CPTS_RFT_CLK */ + assigned-clock-parents = <&k3_clks 63 5>; /* MAIN_0_HSDIV6_CLK */ + interrupts-extended = <&gic500 GIC_SPI 858 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cpts"; + ti,cpts-ext-ts-inputs = <4>; + ti,cpts-periodic-outputs = <2>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j784s4.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4.dtsi new file mode 100644 index 000000000000..3eb0d0568959 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-j784s4.dtsi @@ -0,0 +1,287 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for J784S4 SoC Family + * + * TRM (SPRUJ43 JULY 2022) : http://www.ti.com/lit/zip/spruj52 + * + * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/ + * + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/pinctrl/k3.h> +#include <dt-bindings/soc/ti,sci_pm_domain.h> + +/ { + model = "Texas Instruments K3 J784S4 SoC"; + compatible = "ti,j784s4"; + interrupt-parent = <&gic500>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu-map { + cluster0: cluster0 { + core0 { + cpu = <&cpu0>; + }; + + core1 { + cpu = <&cpu1>; + }; + + core2 { + cpu = <&cpu2>; + }; + + core3 { + cpu = <&cpu3>; + }; + }; + + cluster1: cluster1 { + core0 { + cpu = <&cpu4>; + }; + + core1 { + cpu = <&cpu5>; + }; + + core2 { + cpu = <&cpu6>; + }; + + core3 { + cpu = <&cpu7>; + }; + }; + }; + + cpu0: cpu@0 { + compatible = "arm,cortex-a72"; + reg = <0x000>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&L2_0>; + }; + + cpu1: cpu@1 { + compatible = "arm,cortex-a72"; + reg = <0x001>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&L2_0>; + }; + + cpu2: cpu@2 { + compatible = "arm,cortex-a72"; + reg = <0x002>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&L2_0>; + }; + + cpu3: cpu@3 { + compatible = "arm,cortex-a72"; + reg = <0x003>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&L2_0>; + }; + + cpu4: cpu@100 { + compatible = "arm,cortex-a72"; + reg = <0x100>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&L2_1>; + }; + + cpu5: cpu@101 { + compatible = "arm,cortex-a72"; + reg = <0x101>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&L2_1>; + }; + + cpu6: cpu@102 { + compatible = "arm,cortex-a72"; + reg = <0x102>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&L2_1>; + }; + + cpu7: cpu@103 { + compatible = "arm,cortex-a72"; + reg = <0x103>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&L2_1>; + }; + }; + + L2_0: l2-cache0 { + compatible = "cache"; + cache-level = <2>; + cache-unified; + cache-size = <0x200000>; + cache-line-size = <64>; + cache-sets = <1024>; + next-level-cache = <&msmc_l3>; + }; + + L2_1: l2-cache1 { + compatible = "cache"; + cache-level = <2>; + cache-unified; + cache-size = <0x200000>; + cache-line-size = <64>; + cache-sets = <1024>; + next-level-cache = <&msmc_l3>; + }; + + msmc_l3: l3-cache0 { + compatible = "cache"; + cache-level = <3>; + cache-unified; + }; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + + psci: psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + }; + + a72_timer0: timer-cl0-cpu0 { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */ + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */ + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */ + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */ + }; + + pmu: pmu { + compatible = "arm,cortex-a72-pmu"; + /* Recommendation from GIC500 TRM Table A.3 */ + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + cbass_main: bus@100000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */ + <0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */ + <0x00 0x01000000 0x00 0x01000000 0x00 0x0d000000>, /* Most peripherals */ + <0x00 0x0d000000 0x00 0x0d000000 0x00 0x01000000>, /* PCIe Core*/ + <0x00 0x10000000 0x00 0x10000000 0x00 0x08000000>, /* PCIe0 DAT0 */ + <0x00 0x18000000 0x00 0x18000000 0x00 0x08000000>, /* PCIe1 DAT0 */ + <0x00 0x64800000 0x00 0x64800000 0x00 0x0070c000>, /* C71_1 */ + <0x00 0x65800000 0x00 0x65800000 0x00 0x0070c000>, /* C71_2 */ + <0x00 0x66800000 0x00 0x66800000 0x00 0x0070c000>, /* C71_3 */ + <0x00 0x67800000 0x00 0x67800000 0x00 0x0070c000>, /* C71_4 */ + <0x00 0x6f000000 0x00 0x6f000000 0x00 0x00310000>, /* A72 PERIPHBASE */ + <0x00 0x70000000 0x00 0x70000000 0x00 0x00400000>, /* MSMC RAM */ + <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>, /* MAIN NAVSS */ + <0x41 0x00000000 0x41 0x00000000 0x01 0x00000000>, /* PCIe1 DAT1 */ + <0x4e 0x20000000 0x4e 0x20000000 0x00 0x00080000>, /* GPU */ + + /* MCUSS_WKUP Range */ + <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, + <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>, + <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, + <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, + <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, + <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>, + <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, + <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, + <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, + <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, + <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, + <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, + <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; + + cbass_mcu_wakeup: bus@28380000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS*/ + <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>, /* First peripheral window */ + <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, /* CTRL_MMR0 */ + <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, /* MCU R5F Core0 */ + <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, /* MCU R5F Core1 */ + <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>, /* MCU SRAM */ + <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP peripheral window */ + <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */ + <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */ + <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, /* OSPI register space */ + <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, /* FSS OSPI0/1 data region 0 */ + <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS OSPI0 data region 3 */ + <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; /* FSS OSPI1 data region 3*/ + }; + }; +}; + +/* Now include peripherals from each bus segment */ +#include "k3-j784s4-main.dtsi" +#include "k3-j784s4-mcu-wakeup.dtsi" diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi index e172fa05c9a0..3e9979ab60bb 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi +++ b/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi @@ -135,28 +135,24 @@ clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM0_REF>, <&zynqmp_clk GEM0_TX>, <&zynqmp_clk GEM0_RX>, <&zynqmp_clk GEM_TSU>; - clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk"; }; &gem1 { clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM1_REF>, <&zynqmp_clk GEM1_TX>, <&zynqmp_clk GEM1_RX>, <&zynqmp_clk GEM_TSU>; - clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk"; }; &gem2 { clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM2_REF>, <&zynqmp_clk GEM2_TX>, <&zynqmp_clk GEM2_RX>, <&zynqmp_clk GEM_TSU>; - clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk"; }; &gem3 { clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM3_REF>, <&zynqmp_clk GEM3_TX>, <&zynqmp_clk GEM3_RX>, <&zynqmp_clk GEM_TSU>; - clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk"; }; &gpio { diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso index b610e65e0cdf..b610e65e0cdf 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dts b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso index a52dafbfd59e..a52dafbfd59e 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts index d61a297a2090..6948fd40554b 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts @@ -86,7 +86,7 @@ linux,default-trigger = "bluetooth-power"; }; - vbus-det { /* U5 USB5744 VBUS detection via MIO25 */ + led-vbus-det { /* U5 USB5744 VBUS detection via MIO25 */ label = "vbus_det"; gpios = <&gpio 25 GPIO_ACTIVE_HIGH>; default-state = "on"; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi index 4325cb8526ed..153db59dc4b3 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi @@ -13,6 +13,7 @@ */ #include <dt-bindings/dma/xlnx-zynqmp-dpdma.h> +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/power/xlnx-zynqmp-power.h> #include <dt-bindings/reset/xlnx-zynqmp-resets.h> @@ -75,7 +76,7 @@ }; }; - cpu_opp_table: cpu-opp-table { + cpu_opp_table: opp-table-cpu { compatible = "operating-points-v2"; opp-shared; opp00 { @@ -199,6 +200,12 @@ compatible = "xlnx,zynqmp-pinctrl"; status = "disabled"; }; + + modepin_gpio: gpio { + compatible = "xlnx,zynqmp-gpio-modepin"; + gpio-controller; + #gpio-cells = <2>; + }; }; }; @@ -533,12 +540,12 @@ }; gem0: ethernet@ff0b0000 { - compatible = "cdns,zynqmp-gem", "cdns,gem"; + compatible = "xlnx,zynqmp-gem", "cdns,gem"; status = "disabled"; interrupt-parent = <&gic>; interrupts = <0 57 4>, <0 57 4>; reg = <0x0 0xff0b0000 0x0 0x1000>; - clock-names = "pclk", "hclk", "tx_clk"; + clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk"; #address-cells = <1>; #size-cells = <0>; iommus = <&smmu 0x874>; @@ -548,12 +555,12 @@ }; gem1: ethernet@ff0c0000 { - compatible = "cdns,zynqmp-gem", "cdns,gem"; + compatible = "xlnx,zynqmp-gem", "cdns,gem"; status = "disabled"; interrupt-parent = <&gic>; interrupts = <0 59 4>, <0 59 4>; reg = <0x0 0xff0c0000 0x0 0x1000>; - clock-names = "pclk", "hclk", "tx_clk"; + clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk"; #address-cells = <1>; #size-cells = <0>; iommus = <&smmu 0x875>; @@ -563,12 +570,12 @@ }; gem2: ethernet@ff0d0000 { - compatible = "cdns,zynqmp-gem", "cdns,gem"; + compatible = "xlnx,zynqmp-gem", "cdns,gem"; status = "disabled"; interrupt-parent = <&gic>; interrupts = <0 61 4>, <0 61 4>; reg = <0x0 0xff0d0000 0x0 0x1000>; - clock-names = "pclk", "hclk", "tx_clk"; + clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk"; #address-cells = <1>; #size-cells = <0>; iommus = <&smmu 0x876>; @@ -578,12 +585,12 @@ }; gem3: ethernet@ff0e0000 { - compatible = "cdns,zynqmp-gem", "cdns,gem"; + compatible = "xlnx,zynqmp-gem", "cdns,gem"; status = "disabled"; interrupt-parent = <&gic>; interrupts = <0 63 4>, <0 63 4>; reg = <0x0 0xff0e0000 0x0 0x1000>; - clock-names = "pclk", "hclk", "tx_clk"; + clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk"; #address-cells = <1>; #size-cells = <0>; iommus = <&smmu 0x877>; @@ -847,6 +854,7 @@ <&zynqmp_reset ZYNQMP_RESET_USB0_HIBERRESET>, <&zynqmp_reset ZYNQMP_RESET_USB0_APB>; reset-names = "usb_crst", "usb_hibrst", "usb_apbrst"; + reset-gpios = <&modepin_gpio 1 GPIO_ACTIVE_LOW>; ranges; dwc3_0: usb@fe200000 { @@ -858,6 +866,7 @@ clock-names = "bus_early", "ref"; iommus = <&smmu 0x860>; snps,quirk-frame-length-adjustment = <0x20>; + snps,resume-hs-terminations; /* dma-coherent; */ }; }; @@ -884,6 +893,7 @@ clock-names = "bus_early", "ref"; iommus = <&smmu 0x861>; snps,quirk-frame-length-adjustment = <0x20>; + snps,resume-hs-terminations; /* dma-coherent; */ }; }; diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 851e8f9be06d..989183c76ae0 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -36,13 +36,12 @@ CONFIG_ARCH_ALPINE=y CONFIG_ARCH_APPLE=y CONFIG_ARCH_BCM=y CONFIG_ARCH_BCM2835=y -CONFIG_ARCH_BCMBCA=y CONFIG_ARCH_BCM_IPROC=y -CONFIG_ARCH_BERLIN=y +CONFIG_ARCH_BCMBCA=y CONFIG_ARCH_BRCMSTB=y +CONFIG_ARCH_BERLIN=y CONFIG_ARCH_EXYNOS=y CONFIG_ARCH_K3=y -CONFIG_ARCH_LAYERSCAPE=y CONFIG_ARCH_LG1K=y CONFIG_ARCH_HISI=y CONFIG_ARCH_KEEMBAY=y @@ -50,12 +49,13 @@ CONFIG_ARCH_MEDIATEK=y CONFIG_ARCH_MESON=y CONFIG_ARCH_MVEBU=y CONFIG_ARCH_NXP=y +CONFIG_ARCH_LAYERSCAPE=y CONFIG_ARCH_MXC=y +CONFIG_ARCH_S32=y CONFIG_ARCH_NPCM=y CONFIG_ARCH_QCOM=y CONFIG_ARCH_RENESAS=y CONFIG_ARCH_ROCKCHIP=y -CONFIG_ARCH_S32=y CONFIG_ARCH_SEATTLE=y CONFIG_ARCH_INTEL_SOCFPGA=y CONFIG_ARCH_SYNQUACER=y @@ -112,17 +112,6 @@ CONFIG_ACPI_APEI_MEMORY_FAILURE=y CONFIG_ACPI_APEI_EINJ=y CONFIG_VIRTUALIZATION=y CONFIG_KVM=y -CONFIG_CRYPTO_SHA1_ARM64_CE=y -CONFIG_CRYPTO_SHA2_ARM64_CE=y -CONFIG_CRYPTO_SHA512_ARM64_CE=m -CONFIG_CRYPTO_SHA3_ARM64=m -CONFIG_CRYPTO_SM3_ARM64_CE=m -CONFIG_CRYPTO_GHASH_ARM64_CE=y -CONFIG_CRYPTO_CRCT10DIF_ARM64_CE=m -CONFIG_CRYPTO_AES_ARM64_CE_CCM=y -CONFIG_CRYPTO_AES_ARM64_CE_BLK=y -CONFIG_CRYPTO_CHACHA20_NEON=m -CONFIG_CRYPTO_AES_ARM64_BS=m CONFIG_JUMP_LABEL=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y @@ -186,16 +175,13 @@ CONFIG_NET_ACT_GATE=m CONFIG_QRTR_SMD=m CONFIG_QRTR_TUN=m CONFIG_CAN=m -CONFIG_CAN_FLEXCAN=m -CONFIG_CAN_RCAR=m -CONFIG_CAN_RCAR_CANFD=m -CONFIG_CAN_MCP251XFD=m CONFIG_BT=m CONFIG_BT_HIDP=m # CONFIG_BT_LE is not set CONFIG_BT_LEDS=y # CONFIG_BT_DEBUGFS is not set CONFIG_BT_HCIBTUSB=m +CONFIG_BT_HCIBTUSB_MTK=y CONFIG_BT_HCIUART=m CONFIG_BT_HCIUART_LL=y CONFIG_BT_HCIUART_BCM=y @@ -231,6 +217,7 @@ CONFIG_PCIE_ALTERA_MSI=y CONFIG_PCI_HOST_THUNDER_PEM=y CONFIG_PCI_HOST_THUNDER_ECAM=y CONFIG_PCIE_ROCKCHIP_HOST=m +CONFIG_PCIE_MEDIATEK_GEN3=m CONFIG_PCIE_BRCMSTB=m CONFIG_PCI_IMX6=y CONFIG_PCI_LAYERSCAPE=y @@ -250,6 +237,7 @@ CONFIG_DEVTMPFS_MOUNT=y CONFIG_FW_LOADER_USER_HELPER=y CONFIG_HISILICON_LPC=y CONFIG_TEGRA_ACONNECT=m +CONFIG_MHI_BUS_PCI_GENERIC=m CONFIG_ARM_SCMI_PROTOCOL=y CONFIG_ARM_SCPI_PROTOCOL=y CONFIG_RASPBERRYPI_FIRMWARE=y @@ -319,6 +307,7 @@ CONFIG_MACVTAP=m CONFIG_TUN=y CONFIG_VETH=m CONFIG_VIRTIO_NET=y +CONFIG_MHI_NET=m CONFIG_NET_DSA_BCM_SF2=m CONFIG_NET_DSA_MSCC_FELIX=m CONFIG_AMD_XGBE=y @@ -378,6 +367,10 @@ CONFIG_REALTEK_PHY=y CONFIG_ROCKCHIP_PHY=y CONFIG_DP83867_PHY=y CONFIG_VITESSE_PHY=y +CONFIG_CAN_FLEXCAN=m +CONFIG_CAN_RCAR=m +CONFIG_CAN_RCAR_CANFD=m +CONFIG_CAN_MCP251XFD=m CONFIG_MDIO_BUS_MUX_MULTIPLEXER=y CONFIG_MDIO_BUS_MUX_MMIOREG=y CONFIG_USB_PEGASUS=m @@ -403,14 +396,19 @@ CONFIG_BRCMFMAC=m CONFIG_MWIFIEX=m CONFIG_MWIFIEX_SDIO=m CONFIG_MWIFIEX_PCIE=m +CONFIG_MT7921E=m CONFIG_WL18XX=m CONFIG_WLCORE_SDIO=m +CONFIG_WWAN=m +CONFIG_MHI_WWAN_CTRL=m +CONFIG_MHI_WWAN_MBIM=m CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_ADC=m CONFIG_KEYBOARD_GPIO=y CONFIG_KEYBOARD_SNVS_PWRKEY=m CONFIG_KEYBOARD_IMX_SC_KEY=m CONFIG_KEYBOARD_CROS_EC=y +CONFIG_MOUSE_ELAN_I2C=m CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ATMEL_MXT=m CONFIG_TOUCHSCREEN_GOODIX=m @@ -513,6 +511,7 @@ CONFIG_SPI_FSL_DSPI=y CONFIG_SPI_MESON_SPICC=m CONFIG_SPI_MESON_SPIFC=m CONFIG_SPI_MT65XX=y +CONFIG_SPI_MTK_NOR=m CONFIG_SPI_ORION=y CONFIG_SPI_PL022=y CONFIG_SPI_ROCKCHIP=y @@ -528,6 +527,7 @@ CONFIG_SPI_TEGRA210_QUAD=m CONFIG_SPI_TEGRA114=m CONFIG_SPI_SPIDEV=m CONFIG_SPMI=y +CONFIG_SPMI_MTK_PMIF=m CONFIG_PINCTRL_MAX77620=y CONFIG_PINCTRL_SINGLE=y CONFIG_PINCTRL_OWL=y @@ -555,6 +555,7 @@ CONFIG_PINCTRL_QCM2290=y CONFIG_PINCTRL_QCS404=y CONFIG_PINCTRL_QDF2XXX=y CONFIG_PINCTRL_QCOM_SPMI_PMIC=y +CONFIG_PINCTRL_SA8775P=y CONFIG_PINCTRL_SC7180=y CONFIG_PINCTRL_SC7280=y CONFIG_PINCTRL_SC8180X=y @@ -563,8 +564,10 @@ CONFIG_PINCTRL_SDM845=y CONFIG_PINCTRL_SM6115=y CONFIG_PINCTRL_SM8150=y CONFIG_PINCTRL_SM8250=y +CONFIG_PINCTRL_SM8250_LPASS_LPI=m CONFIG_PINCTRL_SM8350=y CONFIG_PINCTRL_SM8450=y +CONFIG_PINCTRL_SM8550=y CONFIG_PINCTRL_LPASS_LPI=m CONFIG_GPIO_ALTERA=m CONFIG_GPIO_DAVINCI=y @@ -639,6 +642,7 @@ CONFIG_ARM_SBSA_WATCHDOG=y CONFIG_S3C2410_WATCHDOG=y CONFIG_DW_WATCHDOG=y CONFIG_SUNXI_WATCHDOG=m +CONFIG_NPCM7XX_WATCHDOG=y CONFIG_IMX2_WDT=y CONFIG_IMX_SC_WDT=m CONFIG_QCOM_WDT=m @@ -651,7 +655,6 @@ CONFIG_UNIPHIER_WATCHDOG=y CONFIG_PM8916_WATCHDOG=m CONFIG_BCM2835_WDT=y CONFIG_BCM7038_WDT=m -CONFIG_NPCM7XX_WATCHDOG=y CONFIG_MFD_ALTERA_SYSMGR=y CONFIG_MFD_BD9571MWV=y CONFIG_MFD_AXP20X_I2C=y @@ -672,6 +675,7 @@ CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_AXP20X=y CONFIG_REGULATOR_BD718XX=y CONFIG_REGULATOR_BD9571MWV=y +CONFIG_REGULATOR_CROS_EC=y CONFIG_REGULATOR_FAN53555=y CONFIG_REGULATOR_GPIO=y CONFIG_REGULATOR_HI6421V530=y @@ -679,6 +683,7 @@ CONFIG_REGULATOR_HI655X=y CONFIG_REGULATOR_MAX77620=y CONFIG_REGULATOR_MAX8973=y CONFIG_REGULATOR_MP8859=y +CONFIG_REGULATOR_MT6315=m CONFIG_REGULATOR_MT6358=y CONFIG_REGULATOR_MT6359=y CONFIG_REGULATOR_MT6360=y @@ -712,11 +717,14 @@ CONFIG_V4L_PLATFORM_DRIVERS=y CONFIG_SDR_PLATFORM_DRIVERS=y CONFIG_V4L_MEM2MEM_DRIVERS=y CONFIG_VIDEO_MEDIATEK_JPEG=m +CONFIG_VIDEO_MEDIATEK_VCODEC=m CONFIG_VIDEO_QCOM_CAMSS=m CONFIG_VIDEO_QCOM_VENUS=m CONFIG_VIDEO_RCAR_ISP=m CONFIG_VIDEO_RCAR_CSI2=m CONFIG_VIDEO_RCAR_VIN=m +CONFIG_VIDEO_RZG2L_CSI2=m +CONFIG_VIDEO_RZG2L_CRU=m CONFIG_VIDEO_RENESAS_FCP=m CONFIG_VIDEO_RENESAS_FDP1=m CONFIG_VIDEO_RENESAS_VSP1=m @@ -725,7 +733,9 @@ CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC=m CONFIG_VIDEO_SAMSUNG_S5P_JPEG=m CONFIG_VIDEO_SAMSUNG_S5P_MFC=m CONFIG_VIDEO_SUN6I_CSI=m +CONFIG_VIDEO_HANTRO=m CONFIG_VIDEO_IMX219=m +CONFIG_VIDEO_IMX412=m CONFIG_VIDEO_OV5640=m CONFIG_VIDEO_OV5645=m CONFIG_DRM=m @@ -751,6 +761,7 @@ CONFIG_ROCKCHIP_LVDS=y CONFIG_DRM_RCAR_DU=m CONFIG_DRM_RCAR_DW_HDMI=m CONFIG_DRM_RCAR_MIPI_DSI=m +CONFIG_DRM_RZG2L_MIPI_DSI=m CONFIG_DRM_SUN4I=m CONFIG_DRM_SUN6I_DSI=m CONFIG_DRM_SUN8I_DW_HDMI=m @@ -765,6 +776,7 @@ CONFIG_DRM_PANEL_MANTIX_MLAF057WE51=m CONFIG_DRM_PANEL_RAYDIUM_RM67191=m CONFIG_DRM_PANEL_SITRONIX_ST7703=m CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA=m +CONFIG_DRM_PANEL_VISIONOX_VTDR6130=m CONFIG_DRM_LONTIUM_LT8912B=m CONFIG_DRM_LONTIUM_LT9611=m CONFIG_DRM_LONTIUM_LT9611UXC=m @@ -821,6 +833,8 @@ CONFIG_SND_SOC_IMX_AUDMIX=m CONFIG_SND_SOC_MT8183=m CONFIG_SND_SOC_MT8183_MT6358_TS3A227E_MAX98357A=m CONFIG_SND_SOC_MT8183_DA7219_MAX98357A=m +CONFIG_SND_SOC_MT8192=m +CONFIG_SND_SOC_MT8192_MT6359_RT1015_RT5682=m CONFIG_SND_MESON_AXG_SOUND_CARD=m CONFIG_SND_MESON_GX_SOUND_CARD=m CONFIG_SND_SOC_QCOM=m @@ -922,6 +936,7 @@ CONFIG_USB_SERIAL=m CONFIG_USB_SERIAL_CP210X=m CONFIG_USB_SERIAL_FTDI_SIO=m CONFIG_USB_SERIAL_OPTION=m +CONFIG_USB_QCOM_EUD=m CONFIG_USB_HSIC_USB3503=y CONFIG_NOP_USB_XCEIV=y CONFIG_USB_GADGET=y @@ -945,6 +960,7 @@ CONFIG_TYPEC_TCPCI=m CONFIG_TYPEC_FUSB302=m CONFIG_TYPEC_TPS6598X=m CONFIG_TYPEC_HD3SS3220=m +CONFIG_TYPEC_MUX_GPIO_SBU=m CONFIG_MMC=y CONFIG_MMC_BLOCK_MINORS=32 CONFIG_MMC_ARMMMCI=y @@ -952,8 +968,8 @@ CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ACPI=y CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_OF_ARASAN=y -CONFIG_MMC_SDHCI_OF_DWCMSHC=y CONFIG_MMC_SDHCI_OF_ESDHC=y +CONFIG_MMC_SDHCI_OF_DWCMSHC=y CONFIG_MMC_SDHCI_CADENCE=y CONFIG_MMC_SDHCI_ESDHC_IMX=y CONFIG_MMC_SDHCI_TEGRA=y @@ -1025,7 +1041,6 @@ CONFIG_RTC_DRV_SNVS=m CONFIG_RTC_DRV_IMX_SC=m CONFIG_RTC_DRV_MT6397=m CONFIG_RTC_DRV_XGENE=y -CONFIG_TEGRA186_TIMER=y CONFIG_DMADEVICES=y CONFIG_DMA_BCM2835=y CONFIG_DMA_SUN6I=m @@ -1057,12 +1072,12 @@ CONFIG_XEN_GNTDEV=y CONFIG_XEN_GRANT_DEV_ALLOC=y CONFIG_STAGING=y CONFIG_STAGING_MEDIA=y -CONFIG_VIDEO_HANTRO=m CONFIG_VIDEO_IMX_MEDIA=m CONFIG_VIDEO_MAX96712=m CONFIG_CHROME_PLATFORMS=y CONFIG_CROS_EC=y CONFIG_CROS_EC_I2C=y +CONFIG_CROS_EC_RPMSG=m CONFIG_CROS_EC_SPI=y CONFIG_CROS_EC_CHARDEV=m CONFIG_COMMON_CLK_RK808=y @@ -1085,6 +1100,18 @@ CONFIG_CLK_IMX8QXP=y CONFIG_CLK_IMX8ULP=y CONFIG_CLK_IMX93=y CONFIG_TI_SCI_CLK=y +CONFIG_COMMON_CLK_MT8192_AUDSYS=y +CONFIG_COMMON_CLK_MT8192_CAMSYS=y +CONFIG_COMMON_CLK_MT8192_IMGSYS=y +CONFIG_COMMON_CLK_MT8192_IMP_IIC_WRAP=y +CONFIG_COMMON_CLK_MT8192_IPESYS=y +CONFIG_COMMON_CLK_MT8192_MDPSYS=y +CONFIG_COMMON_CLK_MT8192_MFGCFG=y +CONFIG_COMMON_CLK_MT8192_MMSYS=y +CONFIG_COMMON_CLK_MT8192_MSDC=y +CONFIG_COMMON_CLK_MT8192_SCP_ADSP=y +CONFIG_COMMON_CLK_MT8192_VDECSYS=y +CONFIG_COMMON_CLK_MT8192_VENCSYS=y CONFIG_COMMON_CLK_QCOM=y CONFIG_QCOM_A53PLL=y CONFIG_QCOM_CLK_APCS_MSM8916=y @@ -1098,6 +1125,8 @@ CONFIG_MSM_GCC_8994=y CONFIG_MSM_MMCC_8996=y CONFIG_MSM_GCC_8998=y CONFIG_QCS_GCC_404=y +CONFIG_SA_GCC_8775P=y +CONFIG_SC_DISPCC_8280XP=m CONFIG_SC_GCC_7180=y CONFIG_SC_GCC_7280=y CONFIG_SC_GCC_8180X=y @@ -1106,10 +1135,16 @@ CONFIG_SDM_CAMCC_845=m CONFIG_SDM_GPUCC_845=y CONFIG_SDM_VIDEOCC_845=y CONFIG_SDM_DISPCC_845=y +CONFIG_SDM_LPASSCC_845=m +CONFIG_SM_CAMCC_8250=m CONFIG_SM_DISPCC_8250=y +CONFIG_SM_DISPCC_8450=m +CONFIG_SM_DISPCC_8550=m CONFIG_SM_GCC_6115=y CONFIG_SM_GCC_8350=y CONFIG_SM_GCC_8450=y +CONFIG_SM_GCC_8550=y +CONFIG_SM_TCSRCC_8550=y CONFIG_SM_GPUCC_8150=y CONFIG_SM_GPUCC_8250=y CONFIG_SM_VIDEOCC_8250=y @@ -1118,6 +1153,7 @@ CONFIG_CLK_GFM_LPASS_SM8250=m CONFIG_CLK_RCAR_USB2_CLOCK_SEL=y CONFIG_HWSPINLOCK=y CONFIG_HWSPINLOCK_QCOM=y +CONFIG_TEGRA186_TIMER=y CONFIG_RENESAS_OSTM=y CONFIG_ARM_MHU=y CONFIG_IMX_MBOX=y @@ -1160,6 +1196,7 @@ CONFIG_QCOM_CPR=y CONFIG_QCOM_GENI_SE=y CONFIG_QCOM_LLCC=m CONFIG_QCOM_OCMEM=m +CONFIG_QCOM_PMIC_GLINK=m CONFIG_QCOM_RMTFS_MEM=m CONFIG_QCOM_RPMH=y CONFIG_QCOM_RPMHPD=y @@ -1202,7 +1239,7 @@ CONFIG_ARCH_TEGRA_186_SOC=y CONFIG_ARCH_TEGRA_194_SOC=y CONFIG_ARCH_TEGRA_234_SOC=y CONFIG_TI_SCI_PM_DOMAINS=y -CONFIG_ARM_IMX_BUS_DEVFREQ=m +CONFIG_ARM_IMX_BUS_DEVFREQ=y CONFIG_ARM_IMX8M_DDRC_DEVFREQ=m CONFIG_ARM_MEDIATEK_CCI_DEVFREQ=m CONFIG_EXTCON_PTN5150=m @@ -1291,22 +1328,23 @@ CONFIG_ARM_CMN=m CONFIG_ARM_SMMU_V3_PMU=m CONFIG_ARM_DSU_PMU=m CONFIG_FSL_IMX8_DDR_PMU=m -CONFIG_ARM_SPE_PMU=m -CONFIG_ARM_DMC620_PMU=m CONFIG_QCOM_L2_PMU=y CONFIG_QCOM_L3_PMU=y +CONFIG_ARM_SPE_PMU=m +CONFIG_ARM_DMC620_PMU=m CONFIG_HISI_PMU=y CONFIG_NVMEM_IMX_OCOTP=y CONFIG_NVMEM_IMX_OCOTP_SCU=y +CONFIG_NVMEM_LAYERSCAPE_SFP=m +CONFIG_NVMEM_MESON_EFUSE=m CONFIG_NVMEM_MTK_EFUSE=y CONFIG_NVMEM_QCOM_QFPROM=y +CONFIG_NVMEM_RMEM=m CONFIG_NVMEM_ROCKCHIP_EFUSE=y CONFIG_NVMEM_SNVS_LPGPR=y +CONFIG_NVMEM_SPMI_SDAM=m CONFIG_NVMEM_SUNXI_SID=y CONFIG_NVMEM_UNIPHIER_EFUSE=y -CONFIG_NVMEM_MESON_EFUSE=m -CONFIG_NVMEM_RMEM=m -CONFIG_NVMEM_LAYERSCAPE_SFP=m CONFIG_FPGA=y CONFIG_FPGA_MGR_ALTERA_CVP=m CONFIG_FPGA_MGR_STRATIX10_SOC=m @@ -1321,16 +1359,17 @@ CONFIG_SLIMBUS=m CONFIG_SLIM_QCOM_CTRL=m CONFIG_SLIM_QCOM_NGD_CTRL=m CONFIG_INTERCONNECT=y -CONFIG_INTERCONNECT_IMX=m +CONFIG_INTERCONNECT_IMX=y CONFIG_INTERCONNECT_IMX8MM=m CONFIG_INTERCONNECT_IMX8MN=m CONFIG_INTERCONNECT_IMX8MQ=m -CONFIG_INTERCONNECT_IMX8MP=m +CONFIG_INTERCONNECT_IMX8MP=y CONFIG_INTERCONNECT_QCOM=y CONFIG_INTERCONNECT_QCOM_MSM8916=m CONFIG_INTERCONNECT_QCOM_MSM8996=m CONFIG_INTERCONNECT_QCOM_OSM_L3=m CONFIG_INTERCONNECT_QCOM_QCS404=m +CONFIG_INTERCONNECT_QCOM_SA8775P=y CONFIG_INTERCONNECT_QCOM_SC7180=y CONFIG_INTERCONNECT_QCOM_SC7280=y CONFIG_INTERCONNECT_QCOM_SC8180X=y @@ -1340,6 +1379,7 @@ CONFIG_INTERCONNECT_QCOM_SM8150=m CONFIG_INTERCONNECT_QCOM_SM8250=m CONFIG_INTERCONNECT_QCOM_SM8350=m CONFIG_INTERCONNECT_QCOM_SM8450=y +CONFIG_INTERCONNECT_QCOM_SM8550=y CONFIG_HTE=y CONFIG_HTE_TEGRA194=y CONFIG_HTE_TEGRA194_TEST=m @@ -1370,10 +1410,22 @@ CONFIG_9P_FS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_SECURITY=y +CONFIG_CRYPTO_USER=y CONFIG_CRYPTO_ECHAINIV=y CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_ANSI_CPRNG=y CONFIG_CRYPTO_USER_API_RNG=m +CONFIG_CRYPTO_CHACHA20_NEON=m +CONFIG_CRYPTO_GHASH_ARM64_CE=y +CONFIG_CRYPTO_SHA1_ARM64_CE=y +CONFIG_CRYPTO_SHA2_ARM64_CE=y +CONFIG_CRYPTO_SHA512_ARM64_CE=m +CONFIG_CRYPTO_SHA3_ARM64=m +CONFIG_CRYPTO_SM3_ARM64_CE=m +CONFIG_CRYPTO_AES_ARM64_CE_BLK=y +CONFIG_CRYPTO_AES_ARM64_BS=m +CONFIG_CRYPTO_AES_ARM64_CE_CCM=y +CONFIG_CRYPTO_CRCT10DIF_ARM64_CE=m CONFIG_CRYPTO_DEV_SUN8I_CE=m CONFIG_CRYPTO_DEV_FSL_CAAM=m CONFIG_CRYPTO_DEV_FSL_DPAA2_CAAM=m @@ -1384,6 +1436,7 @@ CONFIG_CRYPTO_DEV_HISI_SEC2=m CONFIG_CRYPTO_DEV_HISI_ZIP=m CONFIG_CRYPTO_DEV_HISI_HPRE=m CONFIG_CRYPTO_DEV_HISI_TRNG=m +CONFIG_DMA_RESTRICTED_POOL=y CONFIG_CMA_SIZE_MBYTES=32 CONFIG_PRINTK_TIME=y CONFIG_DEBUG_KERNEL=y diff --git a/arch/arm64/configs/virt.config b/arch/arm64/configs/virt.config new file mode 100644 index 000000000000..6ef0a739717f --- /dev/null +++ b/arch/arm64/configs/virt.config @@ -0,0 +1,39 @@ +# CONFIG_ARCH_ACTIONS is not set +# CONFIG_ARCH_SUNXI is not set +# CONFIG_ARCH_ALPINE is not set +# CONFIG_ARCH_APPLE is not set +# CONFIG_ARCH_BCM is not set +# CONFIG_ARCH_BCM2835 is not set +# CONFIG_ARCH_BCMBCA is not set +# CONFIG_ARCH_BCM_IPROC is not set +# CONFIG_ARCH_BERLIN is not set +# CONFIG_ARCH_BRCMSTB is not set +# CONFIG_ARCH_EXYNOS is not set +# CONFIG_ARCH_K3 is not set +# CONFIG_ARCH_LAYERSCAPE is not set +# CONFIG_ARCH_LG1K is not set +# CONFIG_ARCH_HISI is not set +# CONFIG_ARCH_KEEMBAY is not set +# CONFIG_ARCH_MEDIATEK is not set +# CONFIG_ARCH_MESON is not set +# CONFIG_ARCH_MVEBU is not set +# CONFIG_ARCH_NXP is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_NPCM is not set +# CONFIG_ARCH_QCOM is not set +# CONFIG_ARCH_RENESAS is not set +# CONFIG_ARCH_ROCKCHIP is not set +# CONFIG_ARCH_S32 is not set +# CONFIG_ARCH_SEATTLE is not set +# CONFIG_ARCH_INTEL_SOCFPGA is not set +# CONFIG_ARCH_SYNQUACER is not set +# CONFIG_ARCH_TEGRA is not set +# CONFIG_ARCH_TESLA_FSD is not set +# CONFIG_ARCH_SPRD is not set +# CONFIG_ARCH_THUNDER is not set +# CONFIG_ARCH_THUNDER2 is not set +# CONFIG_ARCH_UNIPHIER is not set +# CONFIG_ARCH_VEXPRESS is not set +# CONFIG_ARCH_VISCONTI is not set +# CONFIG_ARCH_XGENE is not set +# CONFIG_ARCH_ZYNQMP is not set diff --git a/arch/arm64/crypto/sm4-ce-ccm-core.S b/arch/arm64/crypto/sm4-ce-ccm-core.S index 028207c4afd0..fa85856f33ce 100644 --- a/arch/arm64/crypto/sm4-ce-ccm-core.S +++ b/arch/arm64/crypto/sm4-ce-ccm-core.S @@ -8,6 +8,7 @@ */ #include <linux/linkage.h> +#include <linux/cfi_types.h> #include <asm/assembler.h> #include "sm4-ce-asm.h" @@ -104,7 +105,7 @@ SYM_FUNC_START(sm4_ce_ccm_final) SYM_FUNC_END(sm4_ce_ccm_final) .align 3 -SYM_FUNC_START(sm4_ce_ccm_enc) +SYM_TYPED_FUNC_START(sm4_ce_ccm_enc) /* input: * x0: round key array, CTX * x1: dst @@ -216,7 +217,7 @@ SYM_FUNC_START(sm4_ce_ccm_enc) SYM_FUNC_END(sm4_ce_ccm_enc) .align 3 -SYM_FUNC_START(sm4_ce_ccm_dec) +SYM_TYPED_FUNC_START(sm4_ce_ccm_dec) /* input: * x0: round key array, CTX * x1: dst diff --git a/arch/arm64/crypto/sm4-ce-gcm-core.S b/arch/arm64/crypto/sm4-ce-gcm-core.S index 7aa3ec18a289..347f25d75727 100644 --- a/arch/arm64/crypto/sm4-ce-gcm-core.S +++ b/arch/arm64/crypto/sm4-ce-gcm-core.S @@ -9,6 +9,7 @@ */ #include <linux/linkage.h> +#include <linux/cfi_types.h> #include <asm/assembler.h> #include "sm4-ce-asm.h" @@ -370,7 +371,7 @@ SYM_FUNC_START(pmull_ghash_update) SYM_FUNC_END(pmull_ghash_update) .align 3 -SYM_FUNC_START(sm4_ce_pmull_gcm_enc) +SYM_TYPED_FUNC_START(sm4_ce_pmull_gcm_enc) /* input: * x0: round key array, CTX * x1: dst @@ -581,7 +582,7 @@ SYM_FUNC_END(sm4_ce_pmull_gcm_enc) #define RH3 v20 .align 3 -SYM_FUNC_START(sm4_ce_pmull_gcm_dec) +SYM_TYPED_FUNC_START(sm4_ce_pmull_gcm_dec) /* input: * x0: round key array, CTX * x1: dst diff --git a/arch/arm64/include/asm/arch_gicv3.h b/arch/arm64/include/asm/arch_gicv3.h index 48d4473e8eee..01281a5336cf 100644 --- a/arch/arm64/include/asm/arch_gicv3.h +++ b/arch/arm64/include/asm/arch_gicv3.h @@ -190,5 +190,10 @@ static inline void gic_arch_enable_irqs(void) asm volatile ("msr daifclr, #3" : : : "memory"); } +static inline bool gic_has_relaxed_pmr_sync(void) +{ + return cpus_have_cap(ARM64_HAS_GIC_PRIO_RELAXED_SYNC); +} + #endif /* __ASSEMBLY__ */ #endif /* __ASM_ARCH_GICV3_H */ diff --git a/arch/arm64/include/asm/atomic_ll_sc.h b/arch/arm64/include/asm/atomic_ll_sc.h index 0890e4f568fb..cbb3d961123b 100644 --- a/arch/arm64/include/asm/atomic_ll_sc.h +++ b/arch/arm64/include/asm/atomic_ll_sc.h @@ -315,7 +315,7 @@ __ll_sc__cmpxchg_double##name(unsigned long old1, \ " cbnz %w0, 1b\n" \ " " #mb "\n" \ "2:" \ - : "=&r" (tmp), "=&r" (ret), "+Q" (*(unsigned long *)ptr) \ + : "=&r" (tmp), "=&r" (ret), "+Q" (*(__uint128_t *)ptr) \ : "r" (old1), "r" (old2), "r" (new1), "r" (new2) \ : cl); \ \ diff --git a/arch/arm64/include/asm/atomic_lse.h b/arch/arm64/include/asm/atomic_lse.h index 52075e93de6c..a94d6dacc029 100644 --- a/arch/arm64/include/asm/atomic_lse.h +++ b/arch/arm64/include/asm/atomic_lse.h @@ -311,7 +311,7 @@ __lse__cmpxchg_double##name(unsigned long old1, \ " eor %[old2], %[old2], %[oldval2]\n" \ " orr %[old1], %[old1], %[old2]" \ : [old1] "+&r" (x0), [old2] "+&r" (x1), \ - [v] "+Q" (*(unsigned long *)ptr) \ + [v] "+Q" (*(__uint128_t *)ptr) \ : [new1] "r" (x2), [new2] "r" (x3), [ptr] "r" (x4), \ [oldval1] "r" (oldval1), [oldval2] "r" (oldval2) \ : cl); \ diff --git a/arch/arm64/include/asm/barrier.h b/arch/arm64/include/asm/barrier.h index 2cfc4245d2e2..3dd8982a9ce3 100644 --- a/arch/arm64/include/asm/barrier.h +++ b/arch/arm64/include/asm/barrier.h @@ -11,6 +11,8 @@ #include <linux/kasan-checks.h> +#include <asm/alternative-macros.h> + #define __nops(n) ".rept " #n "\nnop\n.endr\n" #define nops(n) asm volatile(__nops(n)) @@ -41,10 +43,11 @@ #ifdef CONFIG_ARM64_PSEUDO_NMI #define pmr_sync() \ do { \ - extern struct static_key_false gic_pmr_sync; \ - \ - if (static_branch_unlikely(&gic_pmr_sync)) \ - dsb(sy); \ + asm volatile( \ + ALTERNATIVE_CB("dsb sy", \ + ARM64_HAS_GIC_PRIO_RELAXED_SYNC, \ + alt_cb_patch_nops) \ + ); \ } while(0) #else #define pmr_sync() do {} while (0) diff --git a/arch/arm64/include/asm/brk-imm.h b/arch/arm64/include/asm/brk-imm.h index 6e000113e508..1abdcd508a11 100644 --- a/arch/arm64/include/asm/brk-imm.h +++ b/arch/arm64/include/asm/brk-imm.h @@ -17,6 +17,7 @@ * 0x401: for compile time BRK instruction * 0x800: kernel-mode BUG() and WARN() traps * 0x9xx: tag-based KASAN trap (allowed values 0x900 - 0x9ff) + * 0x55xx: Undefined Behavior Sanitizer traps ('U' << 8) * 0x8xxx: Control-Flow Integrity traps */ #define KPROBES_BRK_IMM 0x004 @@ -28,6 +29,8 @@ #define BUG_BRK_IMM 0x800 #define KASAN_BRK_IMM 0x900 #define KASAN_BRK_MASK 0x0ff +#define UBSAN_BRK_IMM 0x5500 +#define UBSAN_BRK_MASK 0x00ff #define CFI_BRK_IMM_TARGET GENMASK(4, 0) #define CFI_BRK_IMM_TYPE GENMASK(9, 5) diff --git a/arch/arm64/include/asm/cpufeature.h b/arch/arm64/include/asm/cpufeature.h index 03d1c9d7af82..6bf013fb110d 100644 --- a/arch/arm64/include/asm/cpufeature.h +++ b/arch/arm64/include/asm/cpufeature.h @@ -769,6 +769,12 @@ static __always_inline bool system_supports_sme(void) cpus_have_const_cap(ARM64_SME); } +static __always_inline bool system_supports_sme2(void) +{ + return IS_ENABLED(CONFIG_ARM64_SME) && + cpus_have_const_cap(ARM64_SME2); +} + static __always_inline bool system_supports_fa64(void) { return IS_ENABLED(CONFIG_ARM64_SME) && @@ -806,7 +812,7 @@ static inline bool system_has_full_ptr_auth(void) static __always_inline bool system_uses_irq_prio_masking(void) { return IS_ENABLED(CONFIG_ARM64_PSEUDO_NMI) && - cpus_have_const_cap(ARM64_HAS_IRQ_PRIO_MASKING); + cpus_have_const_cap(ARM64_HAS_GIC_PRIO_MASKING); } static inline bool system_supports_mte(void) @@ -864,7 +870,11 @@ static inline bool cpu_has_hw_af(void) if (!IS_ENABLED(CONFIG_ARM64_HW_AFDBM)) return false; - mmfr1 = read_cpuid(ID_AA64MMFR1_EL1); + /* + * Use cached version to avoid emulated msr operation on KVM + * guests. + */ + mmfr1 = read_sanitised_ftr_reg(SYS_ID_AA64MMFR1_EL1); return cpuid_feature_extract_unsigned_field(mmfr1, ID_AA64MMFR1_EL1_HAFDBS_SHIFT); } diff --git a/arch/arm64/include/asm/cputype.h b/arch/arm64/include/asm/cputype.h index 4e8b66c74ea2..683ca3af4084 100644 --- a/arch/arm64/include/asm/cputype.h +++ b/arch/arm64/include/asm/cputype.h @@ -124,6 +124,8 @@ #define APPLE_CPU_PART_M1_FIRESTORM_PRO 0x025 #define APPLE_CPU_PART_M1_ICESTORM_MAX 0x028 #define APPLE_CPU_PART_M1_FIRESTORM_MAX 0x029 +#define APPLE_CPU_PART_M2_BLIZZARD 0x032 +#define APPLE_CPU_PART_M2_AVALANCHE 0x033 #define AMPERE_CPU_PART_AMPERE1 0xAC3 @@ -177,6 +179,8 @@ #define MIDR_APPLE_M1_FIRESTORM_PRO MIDR_CPU_MODEL(ARM_CPU_IMP_APPLE, APPLE_CPU_PART_M1_FIRESTORM_PRO) #define MIDR_APPLE_M1_ICESTORM_MAX MIDR_CPU_MODEL(ARM_CPU_IMP_APPLE, APPLE_CPU_PART_M1_ICESTORM_MAX) #define MIDR_APPLE_M1_FIRESTORM_MAX MIDR_CPU_MODEL(ARM_CPU_IMP_APPLE, APPLE_CPU_PART_M1_FIRESTORM_MAX) +#define MIDR_APPLE_M2_BLIZZARD MIDR_CPU_MODEL(ARM_CPU_IMP_APPLE, APPLE_CPU_PART_M2_BLIZZARD) +#define MIDR_APPLE_M2_AVALANCHE MIDR_CPU_MODEL(ARM_CPU_IMP_APPLE, APPLE_CPU_PART_M2_AVALANCHE) #define MIDR_AMPERE1 MIDR_CPU_MODEL(ARM_CPU_IMP_AMPERE, AMPERE_CPU_PART_AMPERE1) /* Fujitsu Erratum 010001 affects A64FX 1.0 and 1.1, (v0r0 and v1r0) */ diff --git a/arch/arm64/include/asm/efi.h b/arch/arm64/include/asm/efi.h index 31d13a6001df..acaa39f6381a 100644 --- a/arch/arm64/include/asm/efi.h +++ b/arch/arm64/include/asm/efi.h @@ -48,8 +48,17 @@ int efi_set_mapping_permissions(struct mm_struct *mm, efi_memory_desc_t *md); }) extern spinlock_t efi_rt_lock; +extern u64 *efi_rt_stack_top; efi_status_t __efi_rt_asm_wrapper(void *, const char *, ...); +/* + * efi_rt_stack_top[-1] contains the value the stack pointer had before + * switching to the EFI runtime stack. + */ +#define current_in_efi() \ + (!preemptible() && efi_rt_stack_top != NULL && \ + on_task_stack(current, READ_ONCE(efi_rt_stack_top[-1]), 1)) + #define ARCH_EFI_IRQ_FLAGS_MASK (PSR_D_BIT | PSR_A_BIT | PSR_I_BIT | PSR_F_BIT) /* @@ -105,6 +114,8 @@ static inline unsigned long efi_get_kimg_min_align(void) #define EFI_ALLOC_ALIGN SZ_64K #define EFI_ALLOC_LIMIT ((1UL << 48) - 1) +extern unsigned long primary_entry_offset(void); + /* * On ARM systems, virtually remapped UEFI runtime services are set up in two * distinct stages: diff --git a/arch/arm64/include/asm/el2_setup.h b/arch/arm64/include/asm/el2_setup.h index 668569adf4d3..2cdd010f9524 100644 --- a/arch/arm64/include/asm/el2_setup.h +++ b/arch/arm64/include/asm/el2_setup.h @@ -53,10 +53,10 @@ cbz x0, .Lskip_spe_\@ // Skip if SPE not present mrs_s x0, SYS_PMBIDR_EL1 // If SPE available at EL2, - and x0, x0, #(1 << SYS_PMBIDR_EL1_P_SHIFT) + and x0, x0, #(1 << PMBIDR_EL1_P_SHIFT) cbnz x0, .Lskip_spe_el2_\@ // then permit sampling of physical - mov x0, #(1 << SYS_PMSCR_EL2_PCT_SHIFT | \ - 1 << SYS_PMSCR_EL2_PA_SHIFT) + mov x0, #(1 << PMSCR_EL2_PCT_SHIFT | \ + 1 << PMSCR_EL2_PA_SHIFT) msr_s SYS_PMSCR_EL2, x0 // addresses and physical counter .Lskip_spe_el2_\@: mov x0, #(MDCR_EL2_E2PB_MASK << MDCR_EL2_E2PB_SHIFT) @@ -177,7 +177,7 @@ /** * Initialize EL2 registers to sane values. This should be called early on all * cores that were booted in EL2. Note that everything gets initialised as - * if VHE was not evailable. The kernel context will be upgraded to VHE + * if VHE was not available. The kernel context will be upgraded to VHE * if possible later on in the boot process * * Regs: x0, x1 and x2 are clobbered. diff --git a/arch/arm64/include/asm/esr.h b/arch/arm64/include/asm/esr.h index 15b34fbfca66..c9f15b9e3c71 100644 --- a/arch/arm64/include/asm/esr.h +++ b/arch/arm64/include/asm/esr.h @@ -114,6 +114,15 @@ #define ESR_ELx_FSC_ACCESS (0x08) #define ESR_ELx_FSC_FAULT (0x04) #define ESR_ELx_FSC_PERM (0x0C) +#define ESR_ELx_FSC_SEA_TTW0 (0x14) +#define ESR_ELx_FSC_SEA_TTW1 (0x15) +#define ESR_ELx_FSC_SEA_TTW2 (0x16) +#define ESR_ELx_FSC_SEA_TTW3 (0x17) +#define ESR_ELx_FSC_SECC (0x18) +#define ESR_ELx_FSC_SECC_TTW0 (0x1c) +#define ESR_ELx_FSC_SECC_TTW1 (0x1d) +#define ESR_ELx_FSC_SECC_TTW2 (0x1e) +#define ESR_ELx_FSC_SECC_TTW3 (0x1f) /* ISS field definitions for Data Aborts */ #define ESR_ELx_ISV_SHIFT (24) @@ -341,6 +350,7 @@ #define ESR_ELx_SME_ISS_ILL 1 #define ESR_ELx_SME_ISS_SM_DISABLED 2 #define ESR_ELx_SME_ISS_ZA_DISABLED 3 +#define ESR_ELx_SME_ISS_ZT_DISABLED 4 #ifndef __ASSEMBLY__ #include <asm/types.h> diff --git a/arch/arm64/include/asm/fpsimd.h b/arch/arm64/include/asm/fpsimd.h index e6fa1e2982c8..67f2fb781f59 100644 --- a/arch/arm64/include/asm/fpsimd.h +++ b/arch/arm64/include/asm/fpsimd.h @@ -61,7 +61,7 @@ extern void fpsimd_kvm_prepare(void); struct cpu_fp_state { struct user_fpsimd_state *st; void *sve_state; - void *za_state; + void *sme_state; u64 *svcr; unsigned int sve_vl; unsigned int sme_vl; @@ -105,6 +105,13 @@ static inline void *sve_pffr(struct thread_struct *thread) return (char *)thread->sve_state + sve_ffr_offset(vl); } +static inline void *thread_zt_state(struct thread_struct *thread) +{ + /* The ZT register state is stored immediately after the ZA state */ + unsigned int sme_vq = sve_vq_from_vl(thread_get_sme_vl(thread)); + return thread->sme_state + ZA_SIG_REGS_SIZE(sme_vq); +} + extern void sve_save_state(void *state, u32 *pfpsr, int save_ffr); extern void sve_load_state(void const *state, u32 const *pfpsr, int restore_ffr); @@ -112,12 +119,13 @@ extern void sve_flush_live(bool flush_ffr, unsigned long vq_minus_1); extern unsigned int sve_get_vl(void); extern void sve_set_vq(unsigned long vq_minus_1); extern void sme_set_vq(unsigned long vq_minus_1); -extern void za_save_state(void *state); -extern void za_load_state(void const *state); +extern void sme_save_state(void *state, int zt); +extern void sme_load_state(void const *state, int zt); struct arm64_cpu_capabilities; extern void sve_kernel_enable(const struct arm64_cpu_capabilities *__unused); extern void sme_kernel_enable(const struct arm64_cpu_capabilities *__unused); +extern void sme2_kernel_enable(const struct arm64_cpu_capabilities *__unused); extern void fa64_kernel_enable(const struct arm64_cpu_capabilities *__unused); extern u64 read_zcr_features(void); @@ -355,14 +363,20 @@ extern int sme_get_current_vl(void); /* * Return how many bytes of memory are required to store the full SME - * specific state (currently just ZA) for task, given task's currently - * configured vector length. + * specific state for task, given task's currently configured vector + * length. */ -static inline size_t za_state_size(struct task_struct const *task) +static inline size_t sme_state_size(struct task_struct const *task) { unsigned int vl = task_get_sme_vl(task); + size_t size; + + size = ZA_SIG_REGS_SIZE(sve_vq_from_vl(vl)); + + if (system_supports_sme2()) + size += ZT_SIG_REG_SIZE; - return ZA_SIG_REGS_SIZE(sve_vq_from_vl(vl)); + return size; } #else @@ -382,7 +396,7 @@ static inline int sme_max_virtualisable_vl(void) { return 0; } static inline int sme_set_current_vl(unsigned long arg) { return -EINVAL; } static inline int sme_get_current_vl(void) { return -EINVAL; } -static inline size_t za_state_size(struct task_struct const *task) +static inline size_t sme_state_size(struct task_struct const *task) { return 0; } diff --git a/arch/arm64/include/asm/fpsimdmacros.h b/arch/arm64/include/asm/fpsimdmacros.h index 5e0910cf4832..cd03819a3b68 100644 --- a/arch/arm64/include/asm/fpsimdmacros.h +++ b/arch/arm64/include/asm/fpsimdmacros.h @@ -221,6 +221,28 @@ .endm /* + * LDR (ZT0) + * + * LDR ZT0, nx + */ +.macro _ldr_zt nx + _check_general_reg \nx + .inst 0xe11f8000 \ + | (\nx << 5) +.endm + +/* + * STR (ZT0) + * + * STR ZT0, nx + */ +.macro _str_zt nx + _check_general_reg \nx + .inst 0xe13f8000 \ + | (\nx << 5) +.endm + +/* * Zero the entire ZA array * ZERO ZA */ diff --git a/arch/arm64/include/asm/ftrace.h b/arch/arm64/include/asm/ftrace.h index 5664729800ae..1c2672bbbf37 100644 --- a/arch/arm64/include/asm/ftrace.h +++ b/arch/arm64/include/asm/ftrace.h @@ -62,20 +62,7 @@ extern unsigned long ftrace_graph_call; extern void return_to_handler(void); -static inline unsigned long ftrace_call_adjust(unsigned long addr) -{ - /* - * Adjust addr to point at the BL in the callsite. - * See ftrace_init_nop() for the callsite sequence. - */ - if (IS_ENABLED(CONFIG_DYNAMIC_FTRACE_WITH_ARGS)) - return addr + AARCH64_INSN_SIZE; - /* - * addr is the address of the mcount call instruction. - * recordmcount does the necessary offset calculation. - */ - return addr; -} +unsigned long ftrace_call_adjust(unsigned long addr); #ifdef CONFIG_DYNAMIC_FTRACE_WITH_ARGS struct dyn_ftrace; diff --git a/arch/arm64/include/asm/hugetlb.h b/arch/arm64/include/asm/hugetlb.h index d20f5da2d76f..6a4a1ab8eb23 100644 --- a/arch/arm64/include/asm/hugetlb.h +++ b/arch/arm64/include/asm/hugetlb.h @@ -49,6 +49,15 @@ extern pte_t huge_ptep_get(pte_t *ptep); void __init arm64_hugetlb_cma_reserve(void); +#define huge_ptep_modify_prot_start huge_ptep_modify_prot_start +extern pte_t huge_ptep_modify_prot_start(struct vm_area_struct *vma, + unsigned long addr, pte_t *ptep); + +#define huge_ptep_modify_prot_commit huge_ptep_modify_prot_commit +extern void huge_ptep_modify_prot_commit(struct vm_area_struct *vma, + unsigned long addr, pte_t *ptep, + pte_t old_pte, pte_t new_pte); + #include <asm-generic/hugetlb.h> #endif /* __ASM_HUGETLB_H */ diff --git a/arch/arm64/include/asm/hwcap.h b/arch/arm64/include/asm/hwcap.h index 06dd12c514e6..5d45f19fda7f 100644 --- a/arch/arm64/include/asm/hwcap.h +++ b/arch/arm64/include/asm/hwcap.h @@ -31,12 +31,20 @@ #define COMPAT_HWCAP_VFPD32 (1 << 19) #define COMPAT_HWCAP_LPAE (1 << 20) #define COMPAT_HWCAP_EVTSTRM (1 << 21) +#define COMPAT_HWCAP_FPHP (1 << 22) +#define COMPAT_HWCAP_ASIMDHP (1 << 23) +#define COMPAT_HWCAP_ASIMDDP (1 << 24) +#define COMPAT_HWCAP_ASIMDFHM (1 << 25) +#define COMPAT_HWCAP_ASIMDBF16 (1 << 26) +#define COMPAT_HWCAP_I8MM (1 << 27) #define COMPAT_HWCAP2_AES (1 << 0) #define COMPAT_HWCAP2_PMULL (1 << 1) #define COMPAT_HWCAP2_SHA1 (1 << 2) #define COMPAT_HWCAP2_SHA2 (1 << 3) #define COMPAT_HWCAP2_CRC32 (1 << 4) +#define COMPAT_HWCAP2_SB (1 << 5) +#define COMPAT_HWCAP2_SSBS (1 << 6) #ifndef __ASSEMBLY__ #include <linux/log2.h> @@ -123,6 +131,12 @@ #define KERNEL_HWCAP_CSSC __khwcap2_feature(CSSC) #define KERNEL_HWCAP_RPRFM __khwcap2_feature(RPRFM) #define KERNEL_HWCAP_SVE2P1 __khwcap2_feature(SVE2P1) +#define KERNEL_HWCAP_SME2 __khwcap2_feature(SME2) +#define KERNEL_HWCAP_SME2P1 __khwcap2_feature(SME2P1) +#define KERNEL_HWCAP_SME_I16I32 __khwcap2_feature(SME_I16I32) +#define KERNEL_HWCAP_SME_BI32I32 __khwcap2_feature(SME_BI32I32) +#define KERNEL_HWCAP_SME_B16B16 __khwcap2_feature(SME_B16B16) +#define KERNEL_HWCAP_SME_F16F16 __khwcap2_feature(SME_F16F16) /* * This yields a mask that user programs can use to figure out what diff --git a/arch/arm64/include/asm/insn.h b/arch/arm64/include/asm/insn.h index aaf1f52fbf3e..139a88e4e852 100644 --- a/arch/arm64/include/asm/insn.h +++ b/arch/arm64/include/asm/insn.h @@ -420,6 +420,7 @@ __AARCH64_INSN_FUNCS(sb, 0xFFFFFFFF, 0xD50330FF) __AARCH64_INSN_FUNCS(clrex, 0xFFFFF0FF, 0xD503305F) __AARCH64_INSN_FUNCS(ssbb, 0xFFFFFFFF, 0xD503309F) __AARCH64_INSN_FUNCS(pssbb, 0xFFFFFFFF, 0xD503349F) +__AARCH64_INSN_FUNCS(bti, 0xFFFFFF3F, 0xD503241f) #undef __AARCH64_INSN_FUNCS diff --git a/arch/arm64/include/asm/irqflags.h b/arch/arm64/include/asm/irqflags.h index b57b9b1e4344..e0f5f6b73edd 100644 --- a/arch/arm64/include/asm/irqflags.h +++ b/arch/arm64/include/asm/irqflags.h @@ -21,43 +21,77 @@ * exceptions should be unmasked. */ -/* - * CPU interrupt mask handling. - */ -static inline void arch_local_irq_enable(void) +static __always_inline bool __irqflags_uses_pmr(void) { - if (system_has_prio_mask_debugging()) { - u32 pmr = read_sysreg_s(SYS_ICC_PMR_EL1); + return IS_ENABLED(CONFIG_ARM64_PSEUDO_NMI) && + alternative_has_feature_unlikely(ARM64_HAS_GIC_PRIO_MASKING); +} +static __always_inline void __daif_local_irq_enable(void) +{ + barrier(); + asm volatile("msr daifclr, #3"); + barrier(); +} + +static __always_inline void __pmr_local_irq_enable(void) +{ + if (IS_ENABLED(CONFIG_ARM64_DEBUG_PRIORITY_MASKING)) { + u32 pmr = read_sysreg_s(SYS_ICC_PMR_EL1); WARN_ON_ONCE(pmr != GIC_PRIO_IRQON && pmr != GIC_PRIO_IRQOFF); } - asm volatile(ALTERNATIVE( - "msr daifclr, #3 // arch_local_irq_enable", - __msr_s(SYS_ICC_PMR_EL1, "%0"), - ARM64_HAS_IRQ_PRIO_MASKING) - : - : "r" ((unsigned long) GIC_PRIO_IRQON) - : "memory"); - + barrier(); + write_sysreg_s(GIC_PRIO_IRQON, SYS_ICC_PMR_EL1); pmr_sync(); + barrier(); } -static inline void arch_local_irq_disable(void) +static inline void arch_local_irq_enable(void) { - if (system_has_prio_mask_debugging()) { - u32 pmr = read_sysreg_s(SYS_ICC_PMR_EL1); + if (__irqflags_uses_pmr()) { + __pmr_local_irq_enable(); + } else { + __daif_local_irq_enable(); + } +} +static __always_inline void __daif_local_irq_disable(void) +{ + barrier(); + asm volatile("msr daifset, #3"); + barrier(); +} + +static __always_inline void __pmr_local_irq_disable(void) +{ + if (IS_ENABLED(CONFIG_ARM64_DEBUG_PRIORITY_MASKING)) { + u32 pmr = read_sysreg_s(SYS_ICC_PMR_EL1); WARN_ON_ONCE(pmr != GIC_PRIO_IRQON && pmr != GIC_PRIO_IRQOFF); } - asm volatile(ALTERNATIVE( - "msr daifset, #3 // arch_local_irq_disable", - __msr_s(SYS_ICC_PMR_EL1, "%0"), - ARM64_HAS_IRQ_PRIO_MASKING) - : - : "r" ((unsigned long) GIC_PRIO_IRQOFF) - : "memory"); + barrier(); + write_sysreg_s(GIC_PRIO_IRQOFF, SYS_ICC_PMR_EL1); + barrier(); +} + +static inline void arch_local_irq_disable(void) +{ + if (__irqflags_uses_pmr()) { + __pmr_local_irq_disable(); + } else { + __daif_local_irq_disable(); + } +} + +static __always_inline unsigned long __daif_local_save_flags(void) +{ + return read_sysreg(daif); +} + +static __always_inline unsigned long __pmr_local_save_flags(void) +{ + return read_sysreg_s(SYS_ICC_PMR_EL1); } /* @@ -65,69 +99,108 @@ static inline void arch_local_irq_disable(void) */ static inline unsigned long arch_local_save_flags(void) { - unsigned long flags; + if (__irqflags_uses_pmr()) { + return __pmr_local_save_flags(); + } else { + return __daif_local_save_flags(); + } +} - asm volatile(ALTERNATIVE( - "mrs %0, daif", - __mrs_s("%0", SYS_ICC_PMR_EL1), - ARM64_HAS_IRQ_PRIO_MASKING) - : "=&r" (flags) - : - : "memory"); +static __always_inline bool __daif_irqs_disabled_flags(unsigned long flags) +{ + return flags & PSR_I_BIT; +} - return flags; +static __always_inline bool __pmr_irqs_disabled_flags(unsigned long flags) +{ + return flags != GIC_PRIO_IRQON; } -static inline int arch_irqs_disabled_flags(unsigned long flags) +static inline bool arch_irqs_disabled_flags(unsigned long flags) { - int res; + if (__irqflags_uses_pmr()) { + return __pmr_irqs_disabled_flags(flags); + } else { + return __daif_irqs_disabled_flags(flags); + } +} - asm volatile(ALTERNATIVE( - "and %w0, %w1, #" __stringify(PSR_I_BIT), - "eor %w0, %w1, #" __stringify(GIC_PRIO_IRQON), - ARM64_HAS_IRQ_PRIO_MASKING) - : "=&r" (res) - : "r" ((int) flags) - : "memory"); +static __always_inline bool __daif_irqs_disabled(void) +{ + return __daif_irqs_disabled_flags(__daif_local_save_flags()); +} - return res; +static __always_inline bool __pmr_irqs_disabled(void) +{ + return __pmr_irqs_disabled_flags(__pmr_local_save_flags()); } -static inline int arch_irqs_disabled(void) +static inline bool arch_irqs_disabled(void) { - return arch_irqs_disabled_flags(arch_local_save_flags()); + if (__irqflags_uses_pmr()) { + return __pmr_irqs_disabled(); + } else { + return __daif_irqs_disabled(); + } } -static inline unsigned long arch_local_irq_save(void) +static __always_inline unsigned long __daif_local_irq_save(void) { - unsigned long flags; + unsigned long flags = __daif_local_save_flags(); + + __daif_local_irq_disable(); + + return flags; +} - flags = arch_local_save_flags(); +static __always_inline unsigned long __pmr_local_irq_save(void) +{ + unsigned long flags = __pmr_local_save_flags(); /* * There are too many states with IRQs disabled, just keep the current * state if interrupts are already disabled/masked. */ - if (!arch_irqs_disabled_flags(flags)) - arch_local_irq_disable(); + if (!__pmr_irqs_disabled_flags(flags)) + __pmr_local_irq_disable(); return flags; } +static inline unsigned long arch_local_irq_save(void) +{ + if (__irqflags_uses_pmr()) { + return __pmr_local_irq_save(); + } else { + return __daif_local_irq_save(); + } +} + +static __always_inline void __daif_local_irq_restore(unsigned long flags) +{ + barrier(); + write_sysreg(flags, daif); + barrier(); +} + +static __always_inline void __pmr_local_irq_restore(unsigned long flags) +{ + barrier(); + write_sysreg_s(flags, SYS_ICC_PMR_EL1); + pmr_sync(); + barrier(); +} + /* * restore saved IRQ state */ static inline void arch_local_irq_restore(unsigned long flags) { - asm volatile(ALTERNATIVE( - "msr daif, %0", - __msr_s(SYS_ICC_PMR_EL1, "%0"), - ARM64_HAS_IRQ_PRIO_MASKING) - : - : "r" (flags) - : "memory"); - - pmr_sync(); + if (__irqflags_uses_pmr()) { + __pmr_local_irq_restore(flags); + } else { + __daif_local_irq_restore(flags); + } } #endif /* __ASM_IRQFLAGS_H */ diff --git a/arch/arm64/include/asm/kvm_arm.h b/arch/arm64/include/asm/kvm_arm.h index 0df3fc3a0173..26b0c97df986 100644 --- a/arch/arm64/include/asm/kvm_arm.h +++ b/arch/arm64/include/asm/kvm_arm.h @@ -319,21 +319,6 @@ BIT(18) | \ GENMASK(16, 15)) -/* For compatibility with fault code shared with 32-bit */ -#define FSC_FAULT ESR_ELx_FSC_FAULT -#define FSC_ACCESS ESR_ELx_FSC_ACCESS -#define FSC_PERM ESR_ELx_FSC_PERM -#define FSC_SEA ESR_ELx_FSC_EXTABT -#define FSC_SEA_TTW0 (0x14) -#define FSC_SEA_TTW1 (0x15) -#define FSC_SEA_TTW2 (0x16) -#define FSC_SEA_TTW3 (0x17) -#define FSC_SECC (0x18) -#define FSC_SECC_TTW0 (0x1c) -#define FSC_SECC_TTW1 (0x1d) -#define FSC_SECC_TTW2 (0x1e) -#define FSC_SECC_TTW3 (0x1f) - /* Hyp Prefetch Fault Address Register (HPFAR/HDFAR) */ #define HPFAR_MASK (~UL(0xf)) /* diff --git a/arch/arm64/include/asm/kvm_emulate.h b/arch/arm64/include/asm/kvm_emulate.h index 9bdba47f7e14..193583df2d9c 100644 --- a/arch/arm64/include/asm/kvm_emulate.h +++ b/arch/arm64/include/asm/kvm_emulate.h @@ -349,16 +349,16 @@ static __always_inline u8 kvm_vcpu_trap_get_fault_level(const struct kvm_vcpu *v static __always_inline bool kvm_vcpu_abt_issea(const struct kvm_vcpu *vcpu) { switch (kvm_vcpu_trap_get_fault(vcpu)) { - case FSC_SEA: - case FSC_SEA_TTW0: - case FSC_SEA_TTW1: - case FSC_SEA_TTW2: - case FSC_SEA_TTW3: - case FSC_SECC: - case FSC_SECC_TTW0: - case FSC_SECC_TTW1: - case FSC_SECC_TTW2: - case FSC_SECC_TTW3: + case ESR_ELx_FSC_EXTABT: + case ESR_ELx_FSC_SEA_TTW0: + case ESR_ELx_FSC_SEA_TTW1: + case ESR_ELx_FSC_SEA_TTW2: + case ESR_ELx_FSC_SEA_TTW3: + case ESR_ELx_FSC_SECC: + case ESR_ELx_FSC_SECC_TTW0: + case ESR_ELx_FSC_SECC_TTW1: + case ESR_ELx_FSC_SECC_TTW2: + case ESR_ELx_FSC_SECC_TTW3: return true; default: return false; @@ -373,8 +373,26 @@ static __always_inline int kvm_vcpu_sys_get_rt(struct kvm_vcpu *vcpu) static inline bool kvm_is_write_fault(struct kvm_vcpu *vcpu) { - if (kvm_vcpu_abt_iss1tw(vcpu)) - return true; + if (kvm_vcpu_abt_iss1tw(vcpu)) { + /* + * Only a permission fault on a S1PTW should be + * considered as a write. Otherwise, page tables baked + * in a read-only memslot will result in an exception + * being delivered in the guest. + * + * The drawback is that we end-up faulting twice if the + * guest is using any of HW AF/DB: a translation fault + * to map the page containing the PT (read only at + * first), then a permission fault to allow the flags + * to be set. + */ + switch (kvm_vcpu_trap_get_fault_type(vcpu)) { + case ESR_ELx_FSC_PERM: + return true; + default: + return false; + } + } if (kvm_vcpu_trap_is_iabt(vcpu)) return false; diff --git a/arch/arm64/include/asm/linkage.h b/arch/arm64/include/asm/linkage.h index 1436fa1cde24..d3acd9c87509 100644 --- a/arch/arm64/include/asm/linkage.h +++ b/arch/arm64/include/asm/linkage.h @@ -5,8 +5,8 @@ #include <asm/assembler.h> #endif -#define __ALIGN .align 2 -#define __ALIGN_STR ".align 2" +#define __ALIGN .balign CONFIG_FUNCTION_ALIGNMENT +#define __ALIGN_STR ".balign " #CONFIG_FUNCTION_ALIGNMENT /* * When using in-kernel BTI we need to ensure that PCS-conformant diff --git a/arch/arm64/include/asm/patching.h b/arch/arm64/include/asm/patching.h index 6bf5adc56295..68908b82b168 100644 --- a/arch/arm64/include/asm/patching.h +++ b/arch/arm64/include/asm/patching.h @@ -7,6 +7,8 @@ int aarch64_insn_read(void *addr, u32 *insnp); int aarch64_insn_write(void *addr, u32 insn); +int aarch64_insn_write_literal_u64(void *addr, u64 val); + int aarch64_insn_patch_text_nosync(void *addr, u32 insn); int aarch64_insn_patch_text(void *addrs[], u32 insns[], int cnt); diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h index b4bbeed80fb6..27455bfd64bc 100644 --- a/arch/arm64/include/asm/pgtable.h +++ b/arch/arm64/include/asm/pgtable.h @@ -275,6 +275,7 @@ static inline void set_pte(pte_t *ptep, pte_t pte) } extern void __sync_icache_dcache(pte_t pteval); +bool pgattr_change_is_safe(u64 old, u64 new); /* * PTE bits configuration in the presence of hardware Dirty Bit Management @@ -292,7 +293,7 @@ extern void __sync_icache_dcache(pte_t pteval); * PTE_DIRTY || (PTE_WRITE && !PTE_RDONLY) */ -static inline void __check_racy_pte_update(struct mm_struct *mm, pte_t *ptep, +static inline void __check_safe_pte_update(struct mm_struct *mm, pte_t *ptep, pte_t pte) { pte_t old_pte; @@ -318,6 +319,9 @@ static inline void __check_racy_pte_update(struct mm_struct *mm, pte_t *ptep, VM_WARN_ONCE(pte_write(old_pte) && !pte_dirty(pte), "%s: racy dirty state clearing: 0x%016llx -> 0x%016llx", __func__, pte_val(old_pte), pte_val(pte)); + VM_WARN_ONCE(!pgattr_change_is_safe(pte_val(old_pte), pte_val(pte)), + "%s: unsafe attribute change: 0x%016llx -> 0x%016llx", + __func__, pte_val(old_pte), pte_val(pte)); } static inline void __set_pte_at(struct mm_struct *mm, unsigned long addr, @@ -346,7 +350,7 @@ static inline void __set_pte_at(struct mm_struct *mm, unsigned long addr, mte_sync_tags(old_pte, pte); } - __check_racy_pte_update(mm, ptep, pte); + __check_safe_pte_update(mm, ptep, pte); set_pte(ptep, pte); } @@ -681,7 +685,7 @@ static inline unsigned long pmd_page_vaddr(pmd_t pmd) #define pud_leaf(pud) (pud_present(pud) && !pud_table(pud)) #define pud_valid(pud) pte_valid(pud_pte(pud)) #define pud_user(pud) pte_user(pud_pte(pud)) - +#define pud_user_exec(pud) pte_user_exec(pud_pte(pud)) static inline void set_pud(pud_t *pudp, pud_t pud) { @@ -730,6 +734,7 @@ static inline pmd_t *pud_pgtable(pud_t pud) #else #define pud_page_paddr(pud) ({ BUILD_BUG(); 0; }) +#define pud_user_exec(pud) pud_user(pud) /* Always 0 with folding */ /* Match pmd_offset folding in <asm/generic/pgtable-nopmd.h> */ #define pmd_set_fixmap(addr) NULL @@ -862,12 +867,12 @@ static inline bool pte_user_accessible_page(pte_t pte) static inline bool pmd_user_accessible_page(pmd_t pmd) { - return pmd_leaf(pmd) && (pmd_user(pmd) || pmd_user_exec(pmd)); + return pmd_leaf(pmd) && !pmd_present_invalid(pmd) && (pmd_user(pmd) || pmd_user_exec(pmd)); } static inline bool pud_user_accessible_page(pud_t pud) { - return pud_leaf(pud) && pud_user(pud); + return pud_leaf(pud) && (pud_user(pud) || pud_user_exec(pud)); } #endif @@ -1093,6 +1098,15 @@ static inline bool pud_sect_supported(void) } +#define __HAVE_ARCH_PTEP_MODIFY_PROT_TRANSACTION +#define ptep_modify_prot_start ptep_modify_prot_start +extern pte_t ptep_modify_prot_start(struct vm_area_struct *vma, + unsigned long addr, pte_t *ptep); + +#define ptep_modify_prot_commit ptep_modify_prot_commit +extern void ptep_modify_prot_commit(struct vm_area_struct *vma, + unsigned long addr, pte_t *ptep, + pte_t old_pte, pte_t new_pte); #endif /* !__ASSEMBLY__ */ #endif /* __ASM_PGTABLE_H */ diff --git a/arch/arm64/include/asm/processor.h b/arch/arm64/include/asm/processor.h index d51b32a69309..3918f2a67970 100644 --- a/arch/arm64/include/asm/processor.h +++ b/arch/arm64/include/asm/processor.h @@ -161,7 +161,7 @@ struct thread_struct { enum fp_type fp_type; /* registers FPSIMD or SVE? */ unsigned int fpsimd_cpu; void *sve_state; /* SVE registers, if any */ - void *za_state; /* ZA register, if any */ + void *sme_state; /* ZA and ZT state, if any */ unsigned int vl[ARM64_VEC_MAX]; /* vector length */ unsigned int vl_onexec[ARM64_VEC_MAX]; /* vl after next exec */ unsigned long fault_address; /* fault info */ diff --git a/arch/arm64/include/asm/ptrace.h b/arch/arm64/include/asm/ptrace.h index 41b332c054ab..47ec58031f11 100644 --- a/arch/arm64/include/asm/ptrace.h +++ b/arch/arm64/include/asm/ptrace.h @@ -194,7 +194,7 @@ struct pt_regs { u32 unused2; #endif u64 sdei_ttbr1; - /* Only valid when ARM64_HAS_IRQ_PRIO_MASKING is enabled. */ + /* Only valid when ARM64_HAS_GIC_PRIO_MASKING is enabled. */ u64 pmr_save; u64 stackframe[2]; diff --git a/arch/arm64/include/asm/scs.h b/arch/arm64/include/asm/scs.h index ff7da1268a52..13df982a0808 100644 --- a/arch/arm64/include/asm/scs.h +++ b/arch/arm64/include/asm/scs.h @@ -10,15 +10,16 @@ #ifdef CONFIG_SHADOW_CALL_STACK scs_sp .req x18 - .macro scs_load tsk - ldr scs_sp, [\tsk, #TSK_TI_SCS_SP] + .macro scs_load_current + get_current_task scs_sp + ldr scs_sp, [scs_sp, #TSK_TI_SCS_SP] .endm .macro scs_save tsk str scs_sp, [\tsk, #TSK_TI_SCS_SP] .endm #else - .macro scs_load tsk + .macro scs_load_current .endm .macro scs_save tsk diff --git a/arch/arm64/include/asm/stacktrace.h b/arch/arm64/include/asm/stacktrace.h index 4e5354beafb0..66ec8caa6ac0 100644 --- a/arch/arm64/include/asm/stacktrace.h +++ b/arch/arm64/include/asm/stacktrace.h @@ -106,4 +106,19 @@ static inline struct stack_info stackinfo_get_sdei_critical(void) #define stackinfo_get_sdei_critical() stackinfo_get_unknown() #endif +#ifdef CONFIG_EFI +extern u64 *efi_rt_stack_top; + +static inline struct stack_info stackinfo_get_efi(void) +{ + unsigned long high = (u64)efi_rt_stack_top; + unsigned long low = high - THREAD_SIZE; + + return (struct stack_info) { + .low = low, + .high = high, + }; +} +#endif + #endif /* __ASM_STACKTRACE_H */ diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h index 1312fb48f18b..043ecc3405e7 100644 --- a/arch/arm64/include/asm/sysreg.h +++ b/arch/arm64/include/asm/sysreg.h @@ -216,101 +216,22 @@ #define SYS_PAR_EL1_FST GENMASK(6, 1) /*** Statistical Profiling Extension ***/ -/* ID registers */ -#define SYS_PMSIDR_EL1 sys_reg(3, 0, 9, 9, 7) -#define SYS_PMSIDR_EL1_FE_SHIFT 0 -#define SYS_PMSIDR_EL1_FT_SHIFT 1 -#define SYS_PMSIDR_EL1_FL_SHIFT 2 -#define SYS_PMSIDR_EL1_ARCHINST_SHIFT 3 -#define SYS_PMSIDR_EL1_LDS_SHIFT 4 -#define SYS_PMSIDR_EL1_ERND_SHIFT 5 -#define SYS_PMSIDR_EL1_INTERVAL_SHIFT 8 -#define SYS_PMSIDR_EL1_INTERVAL_MASK 0xfUL -#define SYS_PMSIDR_EL1_MAXSIZE_SHIFT 12 -#define SYS_PMSIDR_EL1_MAXSIZE_MASK 0xfUL -#define SYS_PMSIDR_EL1_COUNTSIZE_SHIFT 16 -#define SYS_PMSIDR_EL1_COUNTSIZE_MASK 0xfUL - -#define SYS_PMBIDR_EL1 sys_reg(3, 0, 9, 10, 7) -#define SYS_PMBIDR_EL1_ALIGN_SHIFT 0 -#define SYS_PMBIDR_EL1_ALIGN_MASK 0xfU -#define SYS_PMBIDR_EL1_P_SHIFT 4 -#define SYS_PMBIDR_EL1_F_SHIFT 5 - -/* Sampling controls */ -#define SYS_PMSCR_EL1 sys_reg(3, 0, 9, 9, 0) -#define SYS_PMSCR_EL1_E0SPE_SHIFT 0 -#define SYS_PMSCR_EL1_E1SPE_SHIFT 1 -#define SYS_PMSCR_EL1_CX_SHIFT 3 -#define SYS_PMSCR_EL1_PA_SHIFT 4 -#define SYS_PMSCR_EL1_TS_SHIFT 5 -#define SYS_PMSCR_EL1_PCT_SHIFT 6 - -#define SYS_PMSCR_EL2 sys_reg(3, 4, 9, 9, 0) -#define SYS_PMSCR_EL2_E0HSPE_SHIFT 0 -#define SYS_PMSCR_EL2_E2SPE_SHIFT 1 -#define SYS_PMSCR_EL2_CX_SHIFT 3 -#define SYS_PMSCR_EL2_PA_SHIFT 4 -#define SYS_PMSCR_EL2_TS_SHIFT 5 -#define SYS_PMSCR_EL2_PCT_SHIFT 6 - -#define SYS_PMSICR_EL1 sys_reg(3, 0, 9, 9, 2) - -#define SYS_PMSIRR_EL1 sys_reg(3, 0, 9, 9, 3) -#define SYS_PMSIRR_EL1_RND_SHIFT 0 -#define SYS_PMSIRR_EL1_INTERVAL_SHIFT 8 -#define SYS_PMSIRR_EL1_INTERVAL_MASK 0xffffffUL - -/* Filtering controls */ -#define SYS_PMSNEVFR_EL1 sys_reg(3, 0, 9, 9, 1) - -#define SYS_PMSFCR_EL1 sys_reg(3, 0, 9, 9, 4) -#define SYS_PMSFCR_EL1_FE_SHIFT 0 -#define SYS_PMSFCR_EL1_FT_SHIFT 1 -#define SYS_PMSFCR_EL1_FL_SHIFT 2 -#define SYS_PMSFCR_EL1_B_SHIFT 16 -#define SYS_PMSFCR_EL1_LD_SHIFT 17 -#define SYS_PMSFCR_EL1_ST_SHIFT 18 - -#define SYS_PMSEVFR_EL1 sys_reg(3, 0, 9, 9, 5) -#define SYS_PMSEVFR_EL1_RES0_8_2 \ +#define PMSEVFR_EL1_RES0_IMP \ (GENMASK_ULL(47, 32) | GENMASK_ULL(23, 16) | GENMASK_ULL(11, 8) |\ BIT_ULL(6) | BIT_ULL(4) | BIT_ULL(2) | BIT_ULL(0)) -#define SYS_PMSEVFR_EL1_RES0_8_3 \ - (SYS_PMSEVFR_EL1_RES0_8_2 & ~(BIT_ULL(18) | BIT_ULL(17) | BIT_ULL(11))) - -#define SYS_PMSLATFR_EL1 sys_reg(3, 0, 9, 9, 6) -#define SYS_PMSLATFR_EL1_MINLAT_SHIFT 0 - -/* Buffer controls */ -#define SYS_PMBLIMITR_EL1 sys_reg(3, 0, 9, 10, 0) -#define SYS_PMBLIMITR_EL1_E_SHIFT 0 -#define SYS_PMBLIMITR_EL1_FM_SHIFT 1 -#define SYS_PMBLIMITR_EL1_FM_MASK 0x3UL -#define SYS_PMBLIMITR_EL1_FM_STOP_IRQ (0 << SYS_PMBLIMITR_EL1_FM_SHIFT) - -#define SYS_PMBPTR_EL1 sys_reg(3, 0, 9, 10, 1) +#define PMSEVFR_EL1_RES0_V1P1 \ + (PMSEVFR_EL1_RES0_IMP & ~(BIT_ULL(18) | BIT_ULL(17) | BIT_ULL(11))) +#define PMSEVFR_EL1_RES0_V1P2 \ + (PMSEVFR_EL1_RES0_V1P1 & ~BIT_ULL(6)) /* Buffer error reporting */ -#define SYS_PMBSR_EL1 sys_reg(3, 0, 9, 10, 3) -#define SYS_PMBSR_EL1_COLL_SHIFT 16 -#define SYS_PMBSR_EL1_S_SHIFT 17 -#define SYS_PMBSR_EL1_EA_SHIFT 18 -#define SYS_PMBSR_EL1_DL_SHIFT 19 -#define SYS_PMBSR_EL1_EC_SHIFT 26 -#define SYS_PMBSR_EL1_EC_MASK 0x3fUL - -#define SYS_PMBSR_EL1_EC_BUF (0x0UL << SYS_PMBSR_EL1_EC_SHIFT) -#define SYS_PMBSR_EL1_EC_FAULT_S1 (0x24UL << SYS_PMBSR_EL1_EC_SHIFT) -#define SYS_PMBSR_EL1_EC_FAULT_S2 (0x25UL << SYS_PMBSR_EL1_EC_SHIFT) - -#define SYS_PMBSR_EL1_FAULT_FSC_SHIFT 0 -#define SYS_PMBSR_EL1_FAULT_FSC_MASK 0x3fUL +#define PMBSR_EL1_FAULT_FSC_SHIFT PMBSR_EL1_MSS_SHIFT +#define PMBSR_EL1_FAULT_FSC_MASK PMBSR_EL1_MSS_MASK -#define SYS_PMBSR_EL1_BUF_BSC_SHIFT 0 -#define SYS_PMBSR_EL1_BUF_BSC_MASK 0x3fUL +#define PMBSR_EL1_BUF_BSC_SHIFT PMBSR_EL1_MSS_SHIFT +#define PMBSR_EL1_BUF_BSC_MASK PMBSR_EL1_MSS_MASK -#define SYS_PMBSR_EL1_BUF_BSC_FULL (0x1UL << SYS_PMBSR_EL1_BUF_BSC_SHIFT) +#define PMBSR_EL1_BUF_BSC_FULL 0x1UL /*** End of Statistical Profiling Extension ***/ @@ -575,6 +496,7 @@ #define SCTLR_ELx_DSSBS (BIT(44)) #define SCTLR_ELx_ATA (BIT(43)) +#define SCTLR_ELx_EE_SHIFT 25 #define SCTLR_ELx_ENIA_SHIFT 31 #define SCTLR_ELx_ITFSB (BIT(37)) @@ -583,7 +505,7 @@ #define SCTLR_ELx_LSMAOE (BIT(29)) #define SCTLR_ELx_nTLSMD (BIT(28)) #define SCTLR_ELx_ENDA (BIT(27)) -#define SCTLR_ELx_EE (BIT(25)) +#define SCTLR_ELx_EE (BIT(SCTLR_ELx_EE_SHIFT)) #define SCTLR_ELx_EIS (BIT(22)) #define SCTLR_ELx_IESB (BIT(21)) #define SCTLR_ELx_TSCXT (BIT(20)) @@ -809,8 +731,8 @@ #define ARM64_FEATURE_FIELD_BITS 4 -/* Create a mask for the feature bits of the specified feature. */ -#define ARM64_FEATURE_MASK(x) (GENMASK_ULL(x##_SHIFT + ARM64_FEATURE_FIELD_BITS - 1, x##_SHIFT)) +/* Defined for compatibility only, do not add new users. */ +#define ARM64_FEATURE_MASK(x) (x##_MASK) #ifdef __ASSEMBLY__ diff --git a/arch/arm64/include/asm/uprobes.h b/arch/arm64/include/asm/uprobes.h index ba4bff5ca674..2b09495499c6 100644 --- a/arch/arm64/include/asm/uprobes.h +++ b/arch/arm64/include/asm/uprobes.h @@ -16,7 +16,7 @@ #define UPROBE_SWBP_INSN_SIZE AARCH64_INSN_SIZE #define UPROBE_XOL_SLOT_BYTES MAX_UINSN_BYTES -typedef u32 uprobe_opcode_t; +typedef __le32 uprobe_opcode_t; struct arch_uprobe_task { }; diff --git a/arch/arm64/include/uapi/asm/hwcap.h b/arch/arm64/include/uapi/asm/hwcap.h index b713d30544f1..69a4fb749c65 100644 --- a/arch/arm64/include/uapi/asm/hwcap.h +++ b/arch/arm64/include/uapi/asm/hwcap.h @@ -96,5 +96,11 @@ #define HWCAP2_CSSC (1UL << 34) #define HWCAP2_RPRFM (1UL << 35) #define HWCAP2_SVE2P1 (1UL << 36) +#define HWCAP2_SME2 (1UL << 37) +#define HWCAP2_SME2P1 (1UL << 38) +#define HWCAP2_SME_I16I32 (1UL << 39) +#define HWCAP2_SME_BI32I32 (1UL << 40) +#define HWCAP2_SME_B16B16 (1UL << 41) +#define HWCAP2_SME_F16F16 (1UL << 42) #endif /* _UAPI__ASM_HWCAP_H */ diff --git a/arch/arm64/include/uapi/asm/sigcontext.h b/arch/arm64/include/uapi/asm/sigcontext.h index 9525041e4a14..656a10ea6c67 100644 --- a/arch/arm64/include/uapi/asm/sigcontext.h +++ b/arch/arm64/include/uapi/asm/sigcontext.h @@ -144,6 +144,14 @@ struct sve_context { #define SVE_SIG_FLAG_SM 0x1 /* Context describes streaming mode */ +/* TPIDR2_EL0 context */ +#define TPIDR2_MAGIC 0x54504902 + +struct tpidr2_context { + struct _aarch64_ctx head; + __u64 tpidr2; +}; + #define ZA_MAGIC 0x54366345 struct za_context { @@ -152,6 +160,14 @@ struct za_context { __u16 __reserved[3]; }; +#define ZT_MAGIC 0x5a544e01 + +struct zt_context { + struct _aarch64_ctx head; + __u16 nregs; + __u16 __reserved[3]; +}; + #endif /* !__ASSEMBLY__ */ #include <asm/sve_context.h> @@ -304,4 +320,15 @@ struct za_context { #define ZA_SIG_CONTEXT_SIZE(vq) \ (ZA_SIG_REGS_OFFSET + ZA_SIG_REGS_SIZE(vq)) +#define ZT_SIG_REG_SIZE 512 + +#define ZT_SIG_REG_BYTES (ZT_SIG_REG_SIZE / 8) + +#define ZT_SIG_REGS_OFFSET sizeof(struct zt_context) + +#define ZT_SIG_REGS_SIZE(n) (ZT_SIG_REG_BYTES * n) + +#define ZT_SIG_CONTEXT_SIZE(n) \ + (sizeof(struct zt_context) + ZT_SIG_REGS_SIZE(n)) + #endif /* _UAPI__ASM_SIGCONTEXT_H */ diff --git a/arch/arm64/kernel/asm-offsets.c b/arch/arm64/kernel/asm-offsets.c index 2234624536d9..ae345b06e9f7 100644 --- a/arch/arm64/kernel/asm-offsets.c +++ b/arch/arm64/kernel/asm-offsets.c @@ -9,6 +9,7 @@ #include <linux/arm_sdei.h> #include <linux/sched.h> +#include <linux/ftrace.h> #include <linux/kexec.h> #include <linux/mm.h> #include <linux/dma-mapping.h> @@ -194,5 +195,8 @@ int main(void) DEFINE(KIMAGE_START, offsetof(struct kimage, start)); BLANK(); #endif +#ifdef CONFIG_FUNCTION_TRACER + DEFINE(FTRACE_OPS_FUNC, offsetof(struct ftrace_ops, func)); +#endif return 0; } diff --git a/arch/arm64/kernel/cpu_errata.c b/arch/arm64/kernel/cpu_errata.c index 89ac00084f38..307faa2b4395 100644 --- a/arch/arm64/kernel/cpu_errata.c +++ b/arch/arm64/kernel/cpu_errata.c @@ -661,6 +661,13 @@ const struct arm64_cpu_capabilities arm64_errata[] = { CAP_MIDR_RANGE_LIST(trbe_write_out_of_range_cpus), }, #endif +#ifdef CONFIG_ARM64_ERRATUM_2645198 + { + .desc = "ARM erratum 2645198", + .capability = ARM64_WORKAROUND_2645198, + ERRATA_MIDR_ALL_VERSIONS(MIDR_CORTEX_A715) + }, +#endif #ifdef CONFIG_ARM64_ERRATUM_2077057 { .desc = "ARM erratum 2077057", diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c index a77315b338e6..45a42cf2191c 100644 --- a/arch/arm64/kernel/cpufeature.c +++ b/arch/arm64/kernel/cpufeature.c @@ -65,6 +65,7 @@ #include <linux/bsearch.h> #include <linux/cpumask.h> #include <linux/crash_dump.h> +#include <linux/kstrtox.h> #include <linux/sort.h> #include <linux/stop_machine.h> #include <linux/sysfs.h> @@ -283,16 +284,26 @@ static const struct arm64_ftr_bits ftr_id_aa64smfr0[] = { ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SME), FTR_STRICT, FTR_EXACT, ID_AA64SMFR0_EL1_FA64_SHIFT, 1, 0), ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SME), + FTR_STRICT, FTR_EXACT, ID_AA64SMFR0_EL1_SMEver_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SME), FTR_STRICT, FTR_EXACT, ID_AA64SMFR0_EL1_I16I64_SHIFT, 4, 0), ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SME), FTR_STRICT, FTR_EXACT, ID_AA64SMFR0_EL1_F64F64_SHIFT, 1, 0), ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SME), + FTR_STRICT, FTR_EXACT, ID_AA64SMFR0_EL1_I16I32_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SME), + FTR_STRICT, FTR_EXACT, ID_AA64SMFR0_EL1_B16B16_SHIFT, 1, 0), + ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SME), + FTR_STRICT, FTR_EXACT, ID_AA64SMFR0_EL1_F16F16_SHIFT, 1, 0), + ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SME), FTR_STRICT, FTR_EXACT, ID_AA64SMFR0_EL1_I8I32_SHIFT, 4, 0), ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SME), FTR_STRICT, FTR_EXACT, ID_AA64SMFR0_EL1_F16F32_SHIFT, 1, 0), ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SME), FTR_STRICT, FTR_EXACT, ID_AA64SMFR0_EL1_B16F32_SHIFT, 1, 0), ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SME), + FTR_STRICT, FTR_EXACT, ID_AA64SMFR0_EL1_BI32I32_SHIFT, 1, 0), + ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SME), FTR_STRICT, FTR_EXACT, ID_AA64SMFR0_EL1_F32F32_SHIFT, 1, 0), ARM64_FTR_END, }; @@ -444,8 +455,8 @@ static const struct arm64_ftr_bits ftr_mvfr0[] = { static const struct arm64_ftr_bits ftr_mvfr1[] = { ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, MVFR1_EL1_SIMDFMAC_SHIFT, 4, 0), - ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, MVFR1_EL1_FPHP_SHIFT, 4, 0), - ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, MVFR1_EL1_SIMDHP_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, MVFR1_EL1_FPHP_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, MVFR1_EL1_SIMDHP_SHIFT, 4, 0), ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, MVFR1_EL1_SIMDSP_SHIFT, 4, 0), ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, MVFR1_EL1_SIMDInt_SHIFT, 4, 0), ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, MVFR1_EL1_SIMDLS_SHIFT, 4, 0), @@ -529,12 +540,12 @@ static const struct arm64_ftr_bits ftr_id_mmfr5[] = { }; static const struct arm64_ftr_bits ftr_id_isar6[] = { - ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR6_EL1_I8MM_SHIFT, 4, 0), - ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR6_EL1_BF16_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR6_EL1_I8MM_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR6_EL1_BF16_SHIFT, 4, 0), ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR6_EL1_SPECRES_SHIFT, 4, 0), - ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR6_EL1_SB_SHIFT, 4, 0), - ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR6_EL1_FHM_SHIFT, 4, 0), - ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR6_EL1_DP_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR6_EL1_SB_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR6_EL1_FHM_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR6_EL1_DP_SHIFT, 4, 0), ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR6_EL1_JSCVT_SHIFT, 4, 0), ARM64_FTR_END, }; @@ -562,7 +573,7 @@ static const struct arm64_ftr_bits ftr_id_pfr1[] = { }; static const struct arm64_ftr_bits ftr_id_pfr2[] = { - ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_PFR2_EL1_SSBS_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_VISIBLE, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_PFR2_EL1_SSBS_SHIFT, 4, 0), ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_PFR2_EL1_CSV3_SHIFT, 4, 0), ARM64_FTR_END, }; @@ -1795,7 +1806,7 @@ kpti_install_ng_mappings(const struct arm64_cpu_capabilities *__unused) static int __init parse_kpti(char *str) { bool enabled; - int ret = strtobool(str, &enabled); + int ret = kstrtobool(str, &enabled); if (ret) return ret; @@ -2039,14 +2050,50 @@ static bool enable_pseudo_nmi; static int __init early_enable_pseudo_nmi(char *p) { - return strtobool(p, &enable_pseudo_nmi); + return kstrtobool(p, &enable_pseudo_nmi); } early_param("irqchip.gicv3_pseudo_nmi", early_enable_pseudo_nmi); static bool can_use_gic_priorities(const struct arm64_cpu_capabilities *entry, int scope) { - return enable_pseudo_nmi && has_useable_gicv3_cpuif(entry, scope); + /* + * ARM64_HAS_GIC_CPUIF_SYSREGS has a lower index, and is a boot CPU + * feature, so will be detected earlier. + */ + BUILD_BUG_ON(ARM64_HAS_GIC_PRIO_MASKING <= ARM64_HAS_GIC_CPUIF_SYSREGS); + if (!cpus_have_cap(ARM64_HAS_GIC_CPUIF_SYSREGS)) + return false; + + return enable_pseudo_nmi; +} + +static bool has_gic_prio_relaxed_sync(const struct arm64_cpu_capabilities *entry, + int scope) +{ + /* + * If we're not using priority masking then we won't be poking PMR_EL1, + * and there's no need to relax synchronization of writes to it, and + * ICC_CTLR_EL1 might not be accessible and we must avoid reads from + * that. + * + * ARM64_HAS_GIC_PRIO_MASKING has a lower index, and is a boot CPU + * feature, so will be detected earlier. + */ + BUILD_BUG_ON(ARM64_HAS_GIC_PRIO_RELAXED_SYNC <= ARM64_HAS_GIC_PRIO_MASKING); + if (!cpus_have_cap(ARM64_HAS_GIC_PRIO_MASKING)) + return false; + + /* + * When Priority Mask Hint Enable (PMHE) == 0b0, PMR is not used as a + * hint for interrupt distribution, a DSB is not necessary when + * unmasking IRQs via PMR, and we can relax the barrier to a NOP. + * + * Linux itself doesn't use 1:N distribution, so has no need to + * set PMHE. The only reason to have it set is if EL3 requires it + * (and we can't change it). + */ + return (gic_read_ctlr() & ICC_CTLR_EL1_PMHE_MASK) == 0; } #endif @@ -2142,7 +2189,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = { }, { .desc = "GIC system register CPU interface", - .capability = ARM64_HAS_SYSREG_GIC_CPUIF, + .capability = ARM64_HAS_GIC_CPUIF_SYSREGS, .type = ARM64_CPUCAP_STRICT_BOOT_CPU_FEATURE, .matches = has_useable_gicv3_cpuif, .sys_reg = SYS_ID_AA64PFR0_EL1, @@ -2534,14 +2581,17 @@ static const struct arm64_cpu_capabilities arm64_features[] = { * Depends on having GICv3 */ .desc = "IRQ priority masking", - .capability = ARM64_HAS_IRQ_PRIO_MASKING, + .capability = ARM64_HAS_GIC_PRIO_MASKING, .type = ARM64_CPUCAP_STRICT_BOOT_CPU_FEATURE, .matches = can_use_gic_priorities, - .sys_reg = SYS_ID_AA64PFR0_EL1, - .field_pos = ID_AA64PFR0_EL1_GIC_SHIFT, - .field_width = 4, - .sign = FTR_UNSIGNED, - .min_field_value = 1, + }, + { + /* + * Depends on ARM64_HAS_GIC_PRIO_MASKING + */ + .capability = ARM64_HAS_GIC_PRIO_RELAXED_SYNC, + .type = ARM64_CPUCAP_STRICT_BOOT_CPU_FEATURE, + .matches = has_gic_prio_relaxed_sync, }, #endif #ifdef CONFIG_ARM64_E0PD @@ -2649,6 +2699,18 @@ static const struct arm64_cpu_capabilities arm64_features[] = { .matches = has_cpuid_feature, .cpu_enable = fa64_kernel_enable, }, + { + .desc = "SME2", + .type = ARM64_CPUCAP_SYSTEM_FEATURE, + .capability = ARM64_SME2, + .sys_reg = SYS_ID_AA64PFR1_EL1, + .sign = FTR_UNSIGNED, + .field_pos = ID_AA64PFR1_EL1_SME_SHIFT, + .field_width = ID_AA64PFR1_EL1_SME_WIDTH, + .min_field_value = ID_AA64PFR1_EL1_SME_SME2, + .matches = has_cpuid_feature, + .cpu_enable = sme2_kernel_enable, + }, #endif /* CONFIG_ARM64_SME */ { .desc = "WFx with timeout", @@ -2688,13 +2750,13 @@ static const struct arm64_cpu_capabilities arm64_features[] = { {}, }; -#define HWCAP_CPUID_MATCH(reg, field, width, s, min_value) \ +#define HWCAP_CPUID_MATCH(reg, field, min_value) \ .matches = has_user_cpuid_feature, \ - .sys_reg = reg, \ - .field_pos = field, \ - .field_width = width, \ - .sign = s, \ - .min_field_value = min_value, + .sys_reg = SYS_##reg, \ + .field_pos = reg##_##field##_SHIFT, \ + .field_width = reg##_##field##_WIDTH, \ + .sign = reg##_##field##_SIGNED, \ + .min_field_value = reg##_##field##_##min_value, #define __HWCAP_CAP(name, cap_type, cap) \ .desc = name, \ @@ -2702,10 +2764,10 @@ static const struct arm64_cpu_capabilities arm64_features[] = { .hwcap_type = cap_type, \ .hwcap = cap, \ -#define HWCAP_CAP(reg, field, width, s, min_value, cap_type, cap) \ +#define HWCAP_CAP(reg, field, min_value, cap_type, cap) \ { \ __HWCAP_CAP(#cap, cap_type, cap) \ - HWCAP_CPUID_MATCH(reg, field, width, s, min_value) \ + HWCAP_CPUID_MATCH(reg, field, min_value) \ } #define HWCAP_MULTI_CAP(list, cap_type, cap) \ @@ -2724,115 +2786,114 @@ static const struct arm64_cpu_capabilities arm64_features[] = { #ifdef CONFIG_ARM64_PTR_AUTH static const struct arm64_cpu_capabilities ptr_auth_hwcap_addr_matches[] = { { - HWCAP_CPUID_MATCH(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_EL1_APA_SHIFT, - 4, FTR_UNSIGNED, - ID_AA64ISAR1_EL1_APA_PAuth) + HWCAP_CPUID_MATCH(ID_AA64ISAR1_EL1, APA, PAuth) }, { - HWCAP_CPUID_MATCH(SYS_ID_AA64ISAR2_EL1, ID_AA64ISAR2_EL1_APA3_SHIFT, - 4, FTR_UNSIGNED, ID_AA64ISAR2_EL1_APA3_PAuth) + HWCAP_CPUID_MATCH(ID_AA64ISAR2_EL1, APA3, PAuth) }, { - HWCAP_CPUID_MATCH(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_EL1_API_SHIFT, - 4, FTR_UNSIGNED, ID_AA64ISAR1_EL1_API_PAuth) + HWCAP_CPUID_MATCH(ID_AA64ISAR1_EL1, API, PAuth) }, {}, }; static const struct arm64_cpu_capabilities ptr_auth_hwcap_gen_matches[] = { { - HWCAP_CPUID_MATCH(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_EL1_GPA_SHIFT, - 4, FTR_UNSIGNED, ID_AA64ISAR1_EL1_GPA_IMP) + HWCAP_CPUID_MATCH(ID_AA64ISAR1_EL1, GPA, IMP) }, { - HWCAP_CPUID_MATCH(SYS_ID_AA64ISAR2_EL1, ID_AA64ISAR2_EL1_GPA3_SHIFT, - 4, FTR_UNSIGNED, ID_AA64ISAR2_EL1_GPA3_IMP) + HWCAP_CPUID_MATCH(ID_AA64ISAR2_EL1, GPA3, IMP) }, { - HWCAP_CPUID_MATCH(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_EL1_GPI_SHIFT, - 4, FTR_UNSIGNED, ID_AA64ISAR1_EL1_GPI_IMP) + HWCAP_CPUID_MATCH(ID_AA64ISAR1_EL1, GPI, IMP) }, {}, }; #endif static const struct arm64_cpu_capabilities arm64_elf_hwcaps[] = { - HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_EL1_AES_SHIFT, 4, FTR_UNSIGNED, 2, CAP_HWCAP, KERNEL_HWCAP_PMULL), - HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_EL1_AES_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_AES), - HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_EL1_SHA1_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_SHA1), - HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_EL1_SHA2_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_SHA2), - HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_EL1_SHA2_SHIFT, 4, FTR_UNSIGNED, 2, CAP_HWCAP, KERNEL_HWCAP_SHA512), - HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_EL1_CRC32_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_CRC32), - HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_EL1_ATOMIC_SHIFT, 4, FTR_UNSIGNED, 2, CAP_HWCAP, KERNEL_HWCAP_ATOMICS), - HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_EL1_RDM_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_ASIMDRDM), - HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_EL1_SHA3_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_SHA3), - HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_EL1_SM3_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_SM3), - HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_EL1_SM4_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_SM4), - HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_EL1_DP_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_ASIMDDP), - HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_EL1_FHM_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_ASIMDFHM), - HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_EL1_TS_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_FLAGM), - HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_EL1_TS_SHIFT, 4, FTR_UNSIGNED, 2, CAP_HWCAP, KERNEL_HWCAP_FLAGM2), - HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_EL1_RNDR_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_RNG), - HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_EL1_FP_SHIFT, 4, FTR_SIGNED, 0, CAP_HWCAP, KERNEL_HWCAP_FP), - HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_EL1_FP_SHIFT, 4, FTR_SIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_FPHP), - HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_EL1_AdvSIMD_SHIFT, 4, FTR_SIGNED, 0, CAP_HWCAP, KERNEL_HWCAP_ASIMD), - HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_EL1_AdvSIMD_SHIFT, 4, FTR_SIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_ASIMDHP), - HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_EL1_DIT_SHIFT, 4, FTR_SIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_DIT), - HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_EL1_DPB_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_DCPOP), - HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_EL1_DPB_SHIFT, 4, FTR_UNSIGNED, 2, CAP_HWCAP, KERNEL_HWCAP_DCPODP), - HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_EL1_JSCVT_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_JSCVT), - HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_EL1_FCMA_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_FCMA), - HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_EL1_LRCPC_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_LRCPC), - HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_EL1_LRCPC_SHIFT, 4, FTR_UNSIGNED, 2, CAP_HWCAP, KERNEL_HWCAP_ILRCPC), - HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_EL1_FRINTTS_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_FRINT), - HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_EL1_SB_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_SB), - HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_EL1_BF16_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_BF16), - HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_EL1_BF16_SHIFT, 4, FTR_UNSIGNED, 2, CAP_HWCAP, KERNEL_HWCAP_EBF16), - HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_EL1_DGH_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_DGH), - HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_EL1_I8MM_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_I8MM), - HWCAP_CAP(SYS_ID_AA64MMFR2_EL1, ID_AA64MMFR2_EL1_AT_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_USCAT), + HWCAP_CAP(ID_AA64ISAR0_EL1, AES, PMULL, CAP_HWCAP, KERNEL_HWCAP_PMULL), + HWCAP_CAP(ID_AA64ISAR0_EL1, AES, AES, CAP_HWCAP, KERNEL_HWCAP_AES), + HWCAP_CAP(ID_AA64ISAR0_EL1, SHA1, IMP, CAP_HWCAP, KERNEL_HWCAP_SHA1), + HWCAP_CAP(ID_AA64ISAR0_EL1, SHA2, SHA256, CAP_HWCAP, KERNEL_HWCAP_SHA2), + HWCAP_CAP(ID_AA64ISAR0_EL1, SHA2, SHA512, CAP_HWCAP, KERNEL_HWCAP_SHA512), + HWCAP_CAP(ID_AA64ISAR0_EL1, CRC32, IMP, CAP_HWCAP, KERNEL_HWCAP_CRC32), + HWCAP_CAP(ID_AA64ISAR0_EL1, ATOMIC, IMP, CAP_HWCAP, KERNEL_HWCAP_ATOMICS), + HWCAP_CAP(ID_AA64ISAR0_EL1, RDM, IMP, CAP_HWCAP, KERNEL_HWCAP_ASIMDRDM), + HWCAP_CAP(ID_AA64ISAR0_EL1, SHA3, IMP, CAP_HWCAP, KERNEL_HWCAP_SHA3), + HWCAP_CAP(ID_AA64ISAR0_EL1, SM3, IMP, CAP_HWCAP, KERNEL_HWCAP_SM3), + HWCAP_CAP(ID_AA64ISAR0_EL1, SM4, IMP, CAP_HWCAP, KERNEL_HWCAP_SM4), + HWCAP_CAP(ID_AA64ISAR0_EL1, DP, IMP, CAP_HWCAP, KERNEL_HWCAP_ASIMDDP), + HWCAP_CAP(ID_AA64ISAR0_EL1, FHM, IMP, CAP_HWCAP, KERNEL_HWCAP_ASIMDFHM), + HWCAP_CAP(ID_AA64ISAR0_EL1, TS, FLAGM, CAP_HWCAP, KERNEL_HWCAP_FLAGM), + HWCAP_CAP(ID_AA64ISAR0_EL1, TS, FLAGM2, CAP_HWCAP, KERNEL_HWCAP_FLAGM2), + HWCAP_CAP(ID_AA64ISAR0_EL1, RNDR, IMP, CAP_HWCAP, KERNEL_HWCAP_RNG), + HWCAP_CAP(ID_AA64PFR0_EL1, FP, IMP, CAP_HWCAP, KERNEL_HWCAP_FP), + HWCAP_CAP(ID_AA64PFR0_EL1, FP, FP16, CAP_HWCAP, KERNEL_HWCAP_FPHP), + HWCAP_CAP(ID_AA64PFR0_EL1, AdvSIMD, IMP, CAP_HWCAP, KERNEL_HWCAP_ASIMD), + HWCAP_CAP(ID_AA64PFR0_EL1, AdvSIMD, FP16, CAP_HWCAP, KERNEL_HWCAP_ASIMDHP), + HWCAP_CAP(ID_AA64PFR0_EL1, DIT, IMP, CAP_HWCAP, KERNEL_HWCAP_DIT), + HWCAP_CAP(ID_AA64ISAR1_EL1, DPB, IMP, CAP_HWCAP, KERNEL_HWCAP_DCPOP), + HWCAP_CAP(ID_AA64ISAR1_EL1, DPB, DPB2, CAP_HWCAP, KERNEL_HWCAP_DCPODP), + HWCAP_CAP(ID_AA64ISAR1_EL1, JSCVT, IMP, CAP_HWCAP, KERNEL_HWCAP_JSCVT), + HWCAP_CAP(ID_AA64ISAR1_EL1, FCMA, IMP, CAP_HWCAP, KERNEL_HWCAP_FCMA), + HWCAP_CAP(ID_AA64ISAR1_EL1, LRCPC, IMP, CAP_HWCAP, KERNEL_HWCAP_LRCPC), + HWCAP_CAP(ID_AA64ISAR1_EL1, LRCPC, LRCPC2, CAP_HWCAP, KERNEL_HWCAP_ILRCPC), + HWCAP_CAP(ID_AA64ISAR1_EL1, FRINTTS, IMP, CAP_HWCAP, KERNEL_HWCAP_FRINT), + HWCAP_CAP(ID_AA64ISAR1_EL1, SB, IMP, CAP_HWCAP, KERNEL_HWCAP_SB), + HWCAP_CAP(ID_AA64ISAR1_EL1, BF16, IMP, CAP_HWCAP, KERNEL_HWCAP_BF16), + HWCAP_CAP(ID_AA64ISAR1_EL1, BF16, EBF16, CAP_HWCAP, KERNEL_HWCAP_EBF16), + HWCAP_CAP(ID_AA64ISAR1_EL1, DGH, IMP, CAP_HWCAP, KERNEL_HWCAP_DGH), + HWCAP_CAP(ID_AA64ISAR1_EL1, I8MM, IMP, CAP_HWCAP, KERNEL_HWCAP_I8MM), + HWCAP_CAP(ID_AA64MMFR2_EL1, AT, IMP, CAP_HWCAP, KERNEL_HWCAP_USCAT), #ifdef CONFIG_ARM64_SVE - HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_EL1_SVE_SHIFT, 4, FTR_UNSIGNED, ID_AA64PFR0_EL1_SVE_IMP, CAP_HWCAP, KERNEL_HWCAP_SVE), - HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_EL1_SVEver_SHIFT, 4, FTR_UNSIGNED, ID_AA64ZFR0_EL1_SVEver_SVE2p1, CAP_HWCAP, KERNEL_HWCAP_SVE2P1), - HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_EL1_SVEver_SHIFT, 4, FTR_UNSIGNED, ID_AA64ZFR0_EL1_SVEver_SVE2, CAP_HWCAP, KERNEL_HWCAP_SVE2), - HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_EL1_AES_SHIFT, 4, FTR_UNSIGNED, ID_AA64ZFR0_EL1_AES_IMP, CAP_HWCAP, KERNEL_HWCAP_SVEAES), - HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_EL1_AES_SHIFT, 4, FTR_UNSIGNED, ID_AA64ZFR0_EL1_AES_PMULL128, CAP_HWCAP, KERNEL_HWCAP_SVEPMULL), - HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_EL1_BitPerm_SHIFT, 4, FTR_UNSIGNED, ID_AA64ZFR0_EL1_BitPerm_IMP, CAP_HWCAP, KERNEL_HWCAP_SVEBITPERM), - HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_EL1_BF16_SHIFT, 4, FTR_UNSIGNED, ID_AA64ZFR0_EL1_BF16_IMP, CAP_HWCAP, KERNEL_HWCAP_SVEBF16), - HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_EL1_BF16_SHIFT, 4, FTR_UNSIGNED, ID_AA64ZFR0_EL1_BF16_EBF16, CAP_HWCAP, KERNEL_HWCAP_SVE_EBF16), - HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_EL1_SHA3_SHIFT, 4, FTR_UNSIGNED, ID_AA64ZFR0_EL1_SHA3_IMP, CAP_HWCAP, KERNEL_HWCAP_SVESHA3), - HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_EL1_SM4_SHIFT, 4, FTR_UNSIGNED, ID_AA64ZFR0_EL1_SM4_IMP, CAP_HWCAP, KERNEL_HWCAP_SVESM4), - HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_EL1_I8MM_SHIFT, 4, FTR_UNSIGNED, ID_AA64ZFR0_EL1_I8MM_IMP, CAP_HWCAP, KERNEL_HWCAP_SVEI8MM), - HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_EL1_F32MM_SHIFT, 4, FTR_UNSIGNED, ID_AA64ZFR0_EL1_F32MM_IMP, CAP_HWCAP, KERNEL_HWCAP_SVEF32MM), - HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_EL1_F64MM_SHIFT, 4, FTR_UNSIGNED, ID_AA64ZFR0_EL1_F64MM_IMP, CAP_HWCAP, KERNEL_HWCAP_SVEF64MM), + HWCAP_CAP(ID_AA64PFR0_EL1, SVE, IMP, CAP_HWCAP, KERNEL_HWCAP_SVE), + HWCAP_CAP(ID_AA64ZFR0_EL1, SVEver, SVE2p1, CAP_HWCAP, KERNEL_HWCAP_SVE2P1), + HWCAP_CAP(ID_AA64ZFR0_EL1, SVEver, SVE2, CAP_HWCAP, KERNEL_HWCAP_SVE2), + HWCAP_CAP(ID_AA64ZFR0_EL1, AES, IMP, CAP_HWCAP, KERNEL_HWCAP_SVEAES), + HWCAP_CAP(ID_AA64ZFR0_EL1, AES, PMULL128, CAP_HWCAP, KERNEL_HWCAP_SVEPMULL), + HWCAP_CAP(ID_AA64ZFR0_EL1, BitPerm, IMP, CAP_HWCAP, KERNEL_HWCAP_SVEBITPERM), + HWCAP_CAP(ID_AA64ZFR0_EL1, BF16, IMP, CAP_HWCAP, KERNEL_HWCAP_SVEBF16), + HWCAP_CAP(ID_AA64ZFR0_EL1, BF16, EBF16, CAP_HWCAP, KERNEL_HWCAP_SVE_EBF16), + HWCAP_CAP(ID_AA64ZFR0_EL1, SHA3, IMP, CAP_HWCAP, KERNEL_HWCAP_SVESHA3), + HWCAP_CAP(ID_AA64ZFR0_EL1, SM4, IMP, CAP_HWCAP, KERNEL_HWCAP_SVESM4), + HWCAP_CAP(ID_AA64ZFR0_EL1, I8MM, IMP, CAP_HWCAP, KERNEL_HWCAP_SVEI8MM), + HWCAP_CAP(ID_AA64ZFR0_EL1, F32MM, IMP, CAP_HWCAP, KERNEL_HWCAP_SVEF32MM), + HWCAP_CAP(ID_AA64ZFR0_EL1, F64MM, IMP, CAP_HWCAP, KERNEL_HWCAP_SVEF64MM), #endif - HWCAP_CAP(SYS_ID_AA64PFR1_EL1, ID_AA64PFR1_EL1_SSBS_SHIFT, 4, FTR_UNSIGNED, ID_AA64PFR1_EL1_SSBS_SSBS2, CAP_HWCAP, KERNEL_HWCAP_SSBS), + HWCAP_CAP(ID_AA64PFR1_EL1, SSBS, SSBS2, CAP_HWCAP, KERNEL_HWCAP_SSBS), #ifdef CONFIG_ARM64_BTI - HWCAP_CAP(SYS_ID_AA64PFR1_EL1, ID_AA64PFR1_EL1_BT_SHIFT, 4, FTR_UNSIGNED, ID_AA64PFR1_EL1_BT_IMP, CAP_HWCAP, KERNEL_HWCAP_BTI), + HWCAP_CAP(ID_AA64PFR1_EL1, BT, IMP, CAP_HWCAP, KERNEL_HWCAP_BTI), #endif #ifdef CONFIG_ARM64_PTR_AUTH HWCAP_MULTI_CAP(ptr_auth_hwcap_addr_matches, CAP_HWCAP, KERNEL_HWCAP_PACA), HWCAP_MULTI_CAP(ptr_auth_hwcap_gen_matches, CAP_HWCAP, KERNEL_HWCAP_PACG), #endif #ifdef CONFIG_ARM64_MTE - HWCAP_CAP(SYS_ID_AA64PFR1_EL1, ID_AA64PFR1_EL1_MTE_SHIFT, 4, FTR_UNSIGNED, ID_AA64PFR1_EL1_MTE_MTE2, CAP_HWCAP, KERNEL_HWCAP_MTE), - HWCAP_CAP(SYS_ID_AA64PFR1_EL1, ID_AA64PFR1_EL1_MTE_SHIFT, 4, FTR_UNSIGNED, ID_AA64PFR1_EL1_MTE_MTE3, CAP_HWCAP, KERNEL_HWCAP_MTE3), + HWCAP_CAP(ID_AA64PFR1_EL1, MTE, MTE2, CAP_HWCAP, KERNEL_HWCAP_MTE), + HWCAP_CAP(ID_AA64PFR1_EL1, MTE, MTE3, CAP_HWCAP, KERNEL_HWCAP_MTE3), #endif /* CONFIG_ARM64_MTE */ - HWCAP_CAP(SYS_ID_AA64MMFR0_EL1, ID_AA64MMFR0_EL1_ECV_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_ECV), - HWCAP_CAP(SYS_ID_AA64MMFR1_EL1, ID_AA64MMFR1_EL1_AFP_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_AFP), - HWCAP_CAP(SYS_ID_AA64ISAR2_EL1, ID_AA64ISAR2_EL1_CSSC_SHIFT, 4, FTR_UNSIGNED, ID_AA64ISAR2_EL1_CSSC_IMP, CAP_HWCAP, KERNEL_HWCAP_CSSC), - HWCAP_CAP(SYS_ID_AA64ISAR2_EL1, ID_AA64ISAR2_EL1_RPRFM_SHIFT, 4, FTR_UNSIGNED, ID_AA64ISAR2_EL1_RPRFM_IMP, CAP_HWCAP, KERNEL_HWCAP_RPRFM), - HWCAP_CAP(SYS_ID_AA64ISAR2_EL1, ID_AA64ISAR2_EL1_RPRES_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_RPRES), - HWCAP_CAP(SYS_ID_AA64ISAR2_EL1, ID_AA64ISAR2_EL1_WFxT_SHIFT, 4, FTR_UNSIGNED, ID_AA64ISAR2_EL1_WFxT_IMP, CAP_HWCAP, KERNEL_HWCAP_WFXT), + HWCAP_CAP(ID_AA64MMFR0_EL1, ECV, IMP, CAP_HWCAP, KERNEL_HWCAP_ECV), + HWCAP_CAP(ID_AA64MMFR1_EL1, AFP, IMP, CAP_HWCAP, KERNEL_HWCAP_AFP), + HWCAP_CAP(ID_AA64ISAR2_EL1, CSSC, IMP, CAP_HWCAP, KERNEL_HWCAP_CSSC), + HWCAP_CAP(ID_AA64ISAR2_EL1, RPRFM, IMP, CAP_HWCAP, KERNEL_HWCAP_RPRFM), + HWCAP_CAP(ID_AA64ISAR2_EL1, RPRES, IMP, CAP_HWCAP, KERNEL_HWCAP_RPRES), + HWCAP_CAP(ID_AA64ISAR2_EL1, WFxT, IMP, CAP_HWCAP, KERNEL_HWCAP_WFXT), #ifdef CONFIG_ARM64_SME - HWCAP_CAP(SYS_ID_AA64PFR1_EL1, ID_AA64PFR1_EL1_SME_SHIFT, 4, FTR_UNSIGNED, ID_AA64PFR1_EL1_SME_IMP, CAP_HWCAP, KERNEL_HWCAP_SME), - HWCAP_CAP(SYS_ID_AA64SMFR0_EL1, ID_AA64SMFR0_EL1_FA64_SHIFT, 1, FTR_UNSIGNED, ID_AA64SMFR0_EL1_FA64_IMP, CAP_HWCAP, KERNEL_HWCAP_SME_FA64), - HWCAP_CAP(SYS_ID_AA64SMFR0_EL1, ID_AA64SMFR0_EL1_I16I64_SHIFT, 4, FTR_UNSIGNED, ID_AA64SMFR0_EL1_I16I64_IMP, CAP_HWCAP, KERNEL_HWCAP_SME_I16I64), - HWCAP_CAP(SYS_ID_AA64SMFR0_EL1, ID_AA64SMFR0_EL1_F64F64_SHIFT, 1, FTR_UNSIGNED, ID_AA64SMFR0_EL1_F64F64_IMP, CAP_HWCAP, KERNEL_HWCAP_SME_F64F64), - HWCAP_CAP(SYS_ID_AA64SMFR0_EL1, ID_AA64SMFR0_EL1_I8I32_SHIFT, 4, FTR_UNSIGNED, ID_AA64SMFR0_EL1_I8I32_IMP, CAP_HWCAP, KERNEL_HWCAP_SME_I8I32), - HWCAP_CAP(SYS_ID_AA64SMFR0_EL1, ID_AA64SMFR0_EL1_F16F32_SHIFT, 1, FTR_UNSIGNED, ID_AA64SMFR0_EL1_F16F32_IMP, CAP_HWCAP, KERNEL_HWCAP_SME_F16F32), - HWCAP_CAP(SYS_ID_AA64SMFR0_EL1, ID_AA64SMFR0_EL1_B16F32_SHIFT, 1, FTR_UNSIGNED, ID_AA64SMFR0_EL1_B16F32_IMP, CAP_HWCAP, KERNEL_HWCAP_SME_B16F32), - HWCAP_CAP(SYS_ID_AA64SMFR0_EL1, ID_AA64SMFR0_EL1_F32F32_SHIFT, 1, FTR_UNSIGNED, ID_AA64SMFR0_EL1_F32F32_IMP, CAP_HWCAP, KERNEL_HWCAP_SME_F32F32), + HWCAP_CAP(ID_AA64PFR1_EL1, SME, IMP, CAP_HWCAP, KERNEL_HWCAP_SME), + HWCAP_CAP(ID_AA64SMFR0_EL1, FA64, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_FA64), + HWCAP_CAP(ID_AA64SMFR0_EL1, SMEver, SME2p1, CAP_HWCAP, KERNEL_HWCAP_SME2P1), + HWCAP_CAP(ID_AA64SMFR0_EL1, SMEver, SME2, CAP_HWCAP, KERNEL_HWCAP_SME2), + HWCAP_CAP(ID_AA64SMFR0_EL1, I16I64, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_I16I64), + HWCAP_CAP(ID_AA64SMFR0_EL1, F64F64, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_F64F64), + HWCAP_CAP(ID_AA64SMFR0_EL1, I16I32, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_I16I32), + HWCAP_CAP(ID_AA64SMFR0_EL1, B16B16, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_B16B16), + HWCAP_CAP(ID_AA64SMFR0_EL1, F16F16, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_F16F16), + HWCAP_CAP(ID_AA64SMFR0_EL1, I8I32, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_I8I32), + HWCAP_CAP(ID_AA64SMFR0_EL1, F16F32, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_F16F32), + HWCAP_CAP(ID_AA64SMFR0_EL1, B16F32, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_B16F32), + HWCAP_CAP(ID_AA64SMFR0_EL1, BI32I32, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_BI32I32), + HWCAP_CAP(ID_AA64SMFR0_EL1, F32F32, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_F32F32), #endif /* CONFIG_ARM64_SME */ {}, }; @@ -2862,15 +2923,23 @@ static bool compat_has_neon(const struct arm64_cpu_capabilities *cap, int scope) static const struct arm64_cpu_capabilities compat_elf_hwcaps[] = { #ifdef CONFIG_COMPAT HWCAP_CAP_MATCH(compat_has_neon, CAP_COMPAT_HWCAP, COMPAT_HWCAP_NEON), - HWCAP_CAP(SYS_MVFR1_EL1, MVFR1_EL1_SIMDFMAC_SHIFT, 4, FTR_UNSIGNED, 1, CAP_COMPAT_HWCAP, COMPAT_HWCAP_VFPv4), + HWCAP_CAP(MVFR1_EL1, SIMDFMAC, IMP, CAP_COMPAT_HWCAP, COMPAT_HWCAP_VFPv4), /* Arm v8 mandates MVFR0.FPDP == {0, 2}. So, piggy back on this for the presence of VFP support */ - HWCAP_CAP(SYS_MVFR0_EL1, MVFR0_EL1_FPDP_SHIFT, 4, FTR_UNSIGNED, 2, CAP_COMPAT_HWCAP, COMPAT_HWCAP_VFP), - HWCAP_CAP(SYS_MVFR0_EL1, MVFR0_EL1_FPDP_SHIFT, 4, FTR_UNSIGNED, 2, CAP_COMPAT_HWCAP, COMPAT_HWCAP_VFPv3), - HWCAP_CAP(SYS_ID_ISAR5_EL1, ID_ISAR5_EL1_AES_SHIFT, 4, FTR_UNSIGNED, 2, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_PMULL), - HWCAP_CAP(SYS_ID_ISAR5_EL1, ID_ISAR5_EL1_AES_SHIFT, 4, FTR_UNSIGNED, 1, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_AES), - HWCAP_CAP(SYS_ID_ISAR5_EL1, ID_ISAR5_EL1_SHA1_SHIFT, 4, FTR_UNSIGNED, 1, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_SHA1), - HWCAP_CAP(SYS_ID_ISAR5_EL1, ID_ISAR5_EL1_SHA2_SHIFT, 4, FTR_UNSIGNED, 1, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_SHA2), - HWCAP_CAP(SYS_ID_ISAR5_EL1, ID_ISAR5_EL1_CRC32_SHIFT, 4, FTR_UNSIGNED, 1, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_CRC32), + HWCAP_CAP(MVFR0_EL1, FPDP, VFPv3, CAP_COMPAT_HWCAP, COMPAT_HWCAP_VFP), + HWCAP_CAP(MVFR0_EL1, FPDP, VFPv3, CAP_COMPAT_HWCAP, COMPAT_HWCAP_VFPv3), + HWCAP_CAP(MVFR1_EL1, FPHP, FP16, CAP_COMPAT_HWCAP, COMPAT_HWCAP_FPHP), + HWCAP_CAP(MVFR1_EL1, SIMDHP, SIMDHP_FLOAT, CAP_COMPAT_HWCAP, COMPAT_HWCAP_ASIMDHP), + HWCAP_CAP(ID_ISAR5_EL1, AES, VMULL, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_PMULL), + HWCAP_CAP(ID_ISAR5_EL1, AES, IMP, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_AES), + HWCAP_CAP(ID_ISAR5_EL1, SHA1, IMP, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_SHA1), + HWCAP_CAP(ID_ISAR5_EL1, SHA2, IMP, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_SHA2), + HWCAP_CAP(ID_ISAR5_EL1, CRC32, IMP, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_CRC32), + HWCAP_CAP(ID_ISAR6_EL1, DP, IMP, CAP_COMPAT_HWCAP, COMPAT_HWCAP_ASIMDDP), + HWCAP_CAP(ID_ISAR6_EL1, FHM, IMP, CAP_COMPAT_HWCAP, COMPAT_HWCAP_ASIMDFHM), + HWCAP_CAP(ID_ISAR6_EL1, SB, IMP, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_SB), + HWCAP_CAP(ID_ISAR6_EL1, BF16, IMP, CAP_COMPAT_HWCAP, COMPAT_HWCAP_ASIMDBF16), + HWCAP_CAP(ID_ISAR6_EL1, I8MM, IMP, CAP_COMPAT_HWCAP, COMPAT_HWCAP_I8MM), + HWCAP_CAP(ID_PFR2_EL1, SSBS, IMP, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_SSBS), #endif {}, }; diff --git a/arch/arm64/kernel/cpuidle.c b/arch/arm64/kernel/cpuidle.c index 4150e308e99c..42e19fff40ee 100644 --- a/arch/arm64/kernel/cpuidle.c +++ b/arch/arm64/kernel/cpuidle.c @@ -62,15 +62,15 @@ int acpi_processor_ffh_lpi_probe(unsigned int cpu) return psci_acpi_cpu_init_idle(cpu); } -int acpi_processor_ffh_lpi_enter(struct acpi_lpi_state *lpi) +__cpuidle int acpi_processor_ffh_lpi_enter(struct acpi_lpi_state *lpi) { u32 state = lpi->address; if (ARM64_LPI_IS_RETENTION_STATE(lpi->arch_flags)) - return CPU_PM_CPU_IDLE_ENTER_RETENTION_PARAM(psci_cpu_suspend_enter, + return CPU_PM_CPU_IDLE_ENTER_RETENTION_PARAM_RCU(psci_cpu_suspend_enter, lpi->index, state); else - return CPU_PM_CPU_IDLE_ENTER_PARAM(psci_cpu_suspend_enter, + return CPU_PM_CPU_IDLE_ENTER_PARAM_RCU(psci_cpu_suspend_enter, lpi->index, state); } #endif diff --git a/arch/arm64/kernel/cpuinfo.c b/arch/arm64/kernel/cpuinfo.c index 379695262b77..eb4378c23b3c 100644 --- a/arch/arm64/kernel/cpuinfo.c +++ b/arch/arm64/kernel/cpuinfo.c @@ -119,6 +119,12 @@ static const char *const hwcap_str[] = { [KERNEL_HWCAP_CSSC] = "cssc", [KERNEL_HWCAP_RPRFM] = "rprfm", [KERNEL_HWCAP_SVE2P1] = "sve2p1", + [KERNEL_HWCAP_SME2] = "sme2", + [KERNEL_HWCAP_SME2P1] = "sme2p1", + [KERNEL_HWCAP_SME_I16I32] = "smei16i32", + [KERNEL_HWCAP_SME_BI32I32] = "smebi32i32", + [KERNEL_HWCAP_SME_B16B16] = "smeb16b16", + [KERNEL_HWCAP_SME_F16F16] = "smef16f16", }; #ifdef CONFIG_COMPAT @@ -146,6 +152,12 @@ static const char *const compat_hwcap_str[] = { [COMPAT_KERNEL_HWCAP(VFPD32)] = NULL, /* Not possible on arm64 */ [COMPAT_KERNEL_HWCAP(LPAE)] = "lpae", [COMPAT_KERNEL_HWCAP(EVTSTRM)] = "evtstrm", + [COMPAT_KERNEL_HWCAP(FPHP)] = "fphp", + [COMPAT_KERNEL_HWCAP(ASIMDHP)] = "asimdhp", + [COMPAT_KERNEL_HWCAP(ASIMDDP)] = "asimddp", + [COMPAT_KERNEL_HWCAP(ASIMDFHM)] = "asimdfhm", + [COMPAT_KERNEL_HWCAP(ASIMDBF16)] = "asimdbf16", + [COMPAT_KERNEL_HWCAP(I8MM)] = "i8mm", }; #define COMPAT_KERNEL_HWCAP2(x) const_ilog2(COMPAT_HWCAP2_ ## x) @@ -155,6 +167,8 @@ static const char *const compat_hwcap2_str[] = { [COMPAT_KERNEL_HWCAP2(SHA1)] = "sha1", [COMPAT_KERNEL_HWCAP2(SHA2)] = "sha2", [COMPAT_KERNEL_HWCAP2(CRC32)] = "crc32", + [COMPAT_KERNEL_HWCAP2(SB)] = "sb", + [COMPAT_KERNEL_HWCAP2(SSBS)] = "ssbs", }; #endif /* CONFIG_COMPAT */ diff --git a/arch/arm64/kernel/efi-rt-wrapper.S b/arch/arm64/kernel/efi-rt-wrapper.S index a00886410537..e8ae803662cf 100644 --- a/arch/arm64/kernel/efi-rt-wrapper.S +++ b/arch/arm64/kernel/efi-rt-wrapper.S @@ -4,6 +4,7 @@ */ #include <linux/linkage.h> +#include <asm/assembler.h> SYM_FUNC_START(__efi_rt_asm_wrapper) stp x29, x30, [sp, #-112]! @@ -45,7 +46,10 @@ SYM_FUNC_START(__efi_rt_asm_wrapper) mov x4, x6 blr x8 + mov x16, sp mov sp, x29 + str xzr, [x16, #8] // clear recorded task SP value + ldp x1, x2, [sp, #16] cmp x2, x18 ldp x29, x30, [sp], #112 @@ -70,6 +74,9 @@ SYM_FUNC_END(__efi_rt_asm_wrapper) SYM_CODE_START(__efi_rt_asm_recover) mov sp, x30 + ldr_l x16, efi_rt_stack_top // clear recorded task SP value + str xzr, [x16, #-8] + ldp x19, x20, [sp, #32] ldp x21, x22, [sp, #48] ldp x23, x24, [sp, #64] diff --git a/arch/arm64/kernel/efi.c b/arch/arm64/kernel/efi.c index fab05de2e12d..b273900f4566 100644 --- a/arch/arm64/kernel/efi.c +++ b/arch/arm64/kernel/efi.c @@ -11,6 +11,7 @@ #include <linux/init.h> #include <asm/efi.h> +#include <asm/stacktrace.h> static bool region_is_misaligned(const efi_memory_desc_t *md) { @@ -154,7 +155,7 @@ asmlinkage efi_status_t __efi_rt_asm_recover(void); bool efi_runtime_fixup_exception(struct pt_regs *regs, const char *msg) { /* Check whether the exception occurred while running the firmware */ - if (current_work() != &efi_rts_work.work || regs->pc >= TASK_SIZE_64) + if (!current_in_efi() || regs->pc >= TASK_SIZE_64) return false; pr_err(FW_BUG "Unable to handle %s in EFI runtime service\n", msg); diff --git a/arch/arm64/kernel/elfcore.c b/arch/arm64/kernel/elfcore.c index 353009d7f307..2e94d20c4ac7 100644 --- a/arch/arm64/kernel/elfcore.c +++ b/arch/arm64/kernel/elfcore.c @@ -8,28 +8,27 @@ #include <asm/cpufeature.h> #include <asm/mte.h> -#define for_each_mte_vma(vmi, vma) \ +#define for_each_mte_vma(cprm, i, m) \ if (system_supports_mte()) \ - for_each_vma(vmi, vma) \ - if (vma->vm_flags & VM_MTE) + for (i = 0, m = cprm->vma_meta; \ + i < cprm->vma_count; \ + i++, m = cprm->vma_meta + i) \ + if (m->flags & VM_MTE) -static unsigned long mte_vma_tag_dump_size(struct vm_area_struct *vma) +static unsigned long mte_vma_tag_dump_size(struct core_vma_metadata *m) { - if (vma->vm_flags & VM_DONTDUMP) - return 0; - - return vma_pages(vma) * MTE_PAGE_TAG_STORAGE; + return (m->dump_size >> PAGE_SHIFT) * MTE_PAGE_TAG_STORAGE; } /* Derived from dump_user_range(); start/end must be page-aligned */ static int mte_dump_tag_range(struct coredump_params *cprm, - unsigned long start, unsigned long end) + unsigned long start, unsigned long len) { int ret = 1; unsigned long addr; void *tags = NULL; - for (addr = start; addr < end; addr += PAGE_SIZE) { + for (addr = start; addr < start + len; addr += PAGE_SIZE) { struct page *page = get_dump_page(addr); /* @@ -65,7 +64,6 @@ static int mte_dump_tag_range(struct coredump_params *cprm, mte_save_page_tags(page_address(page), tags); put_page(page); if (!dump_emit(cprm, tags, MTE_PAGE_TAG_STORAGE)) { - mte_free_tag_storage(tags); ret = 0; break; } @@ -77,13 +75,13 @@ static int mte_dump_tag_range(struct coredump_params *cprm, return ret; } -Elf_Half elf_core_extra_phdrs(void) +Elf_Half elf_core_extra_phdrs(struct coredump_params *cprm) { - struct vm_area_struct *vma; + int i; + struct core_vma_metadata *m; int vma_count = 0; - VMA_ITERATOR(vmi, current->mm, 0); - for_each_mte_vma(vmi, vma) + for_each_mte_vma(cprm, i, m) vma_count++; return vma_count; @@ -91,18 +89,18 @@ Elf_Half elf_core_extra_phdrs(void) int elf_core_write_extra_phdrs(struct coredump_params *cprm, loff_t offset) { - struct vm_area_struct *vma; - VMA_ITERATOR(vmi, current->mm, 0); + int i; + struct core_vma_metadata *m; - for_each_mte_vma(vmi, vma) { + for_each_mte_vma(cprm, i, m) { struct elf_phdr phdr; phdr.p_type = PT_AARCH64_MEMTAG_MTE; phdr.p_offset = offset; - phdr.p_vaddr = vma->vm_start; + phdr.p_vaddr = m->start; phdr.p_paddr = 0; - phdr.p_filesz = mte_vma_tag_dump_size(vma); - phdr.p_memsz = vma->vm_end - vma->vm_start; + phdr.p_filesz = mte_vma_tag_dump_size(m); + phdr.p_memsz = m->end - m->start; offset += phdr.p_filesz; phdr.p_flags = 0; phdr.p_align = 0; @@ -114,28 +112,25 @@ int elf_core_write_extra_phdrs(struct coredump_params *cprm, loff_t offset) return 1; } -size_t elf_core_extra_data_size(void) +size_t elf_core_extra_data_size(struct coredump_params *cprm) { - struct vm_area_struct *vma; + int i; + struct core_vma_metadata *m; size_t data_size = 0; - VMA_ITERATOR(vmi, current->mm, 0); - for_each_mte_vma(vmi, vma) - data_size += mte_vma_tag_dump_size(vma); + for_each_mte_vma(cprm, i, m) + data_size += mte_vma_tag_dump_size(m); return data_size; } int elf_core_write_extra_data(struct coredump_params *cprm) { - struct vm_area_struct *vma; - VMA_ITERATOR(vmi, current->mm, 0); - - for_each_mte_vma(vmi, vma) { - if (vma->vm_flags & VM_DONTDUMP) - continue; + int i; + struct core_vma_metadata *m; - if (!mte_dump_tag_range(cprm, vma->vm_start, vma->vm_end)) + for_each_mte_vma(cprm, i, m) { + if (!mte_dump_tag_range(cprm, m->start, m->dump_size)) return 0; } diff --git a/arch/arm64/kernel/entry-fpsimd.S b/arch/arm64/kernel/entry-fpsimd.S index 229436f33df5..6325db1a2179 100644 --- a/arch/arm64/kernel/entry-fpsimd.S +++ b/arch/arm64/kernel/entry-fpsimd.S @@ -100,25 +100,35 @@ SYM_FUNC_START(sme_set_vq) SYM_FUNC_END(sme_set_vq) /* - * Save the SME state + * Save the ZA and ZT state * * x0 - pointer to buffer for state + * x1 - number of ZT registers to save */ -SYM_FUNC_START(za_save_state) - _sme_rdsvl 1, 1 // x1 = VL/8 - sme_save_za 0, x1, 12 +SYM_FUNC_START(sme_save_state) + _sme_rdsvl 2, 1 // x2 = VL/8 + sme_save_za 0, x2, 12 // Leaves x0 pointing to the end of ZA + + cbz x1, 1f + _str_zt 0 +1: ret -SYM_FUNC_END(za_save_state) +SYM_FUNC_END(sme_save_state) /* - * Load the SME state + * Load the ZA and ZT state * * x0 - pointer to buffer for state + * x1 - number of ZT registers to save */ -SYM_FUNC_START(za_load_state) - _sme_rdsvl 1, 1 // x1 = VL/8 - sme_load_za 0, x1, 12 +SYM_FUNC_START(sme_load_state) + _sme_rdsvl 2, 1 // x2 = VL/8 + sme_load_za 0, x2, 12 // Leaves x0 pointing to the end of ZA + + cbz x1, 1f + _ldr_zt 0 +1: ret -SYM_FUNC_END(za_load_state) +SYM_FUNC_END(sme_load_state) #endif /* CONFIG_ARM64_SME */ diff --git a/arch/arm64/kernel/entry-ftrace.S b/arch/arm64/kernel/entry-ftrace.S index 3b625f76ffba..350ed81324ac 100644 --- a/arch/arm64/kernel/entry-ftrace.S +++ b/arch/arm64/kernel/entry-ftrace.S @@ -65,13 +65,35 @@ SYM_CODE_START(ftrace_caller) stp x29, x30, [sp, #FREGS_SIZE] add x29, sp, #FREGS_SIZE - sub x0, x30, #AARCH64_INSN_SIZE // ip (callsite's BL insn) - mov x1, x9 // parent_ip (callsite's LR) - ldr_l x2, function_trace_op // op - mov x3, sp // regs + /* Prepare arguments for the the tracer func */ + sub x0, x30, #AARCH64_INSN_SIZE // ip (callsite's BL insn) + mov x1, x9 // parent_ip (callsite's LR) + mov x3, sp // regs + +#ifdef CONFIG_DYNAMIC_FTRACE_WITH_CALL_OPS + /* + * The literal pointer to the ops is at an 8-byte aligned boundary + * which is either 12 or 16 bytes before the BL instruction in the call + * site. See ftrace_call_adjust() for details. + * + * Therefore here the LR points at `literal + 16` or `literal + 20`, + * and we can find the address of the literal in either case by + * aligning to an 8-byte boundary and subtracting 16. We do the + * alignment first as this allows us to fold the subtraction into the + * LDR. + */ + bic x2, x30, 0x7 + ldr x2, [x2, #-16] // op + + ldr x4, [x2, #FTRACE_OPS_FUNC] // op->func + blr x4 // op->func(ip, parent_ip, op, regs) + +#else + ldr_l x2, function_trace_op // op SYM_INNER_LABEL(ftrace_call, SYM_L_GLOBAL) - bl ftrace_stub + bl ftrace_stub // func(ip, parent_ip, op, regs) +#endif /* * At the callsite x0-x8 and x19-x30 were live. Any C code will have preserved diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S index 11cb99c4d298..ab2a6e33c052 100644 --- a/arch/arm64/kernel/entry.S +++ b/arch/arm64/kernel/entry.S @@ -275,7 +275,7 @@ alternative_if ARM64_HAS_ADDRESS_AUTH alternative_else_nop_endif 1: - scs_load tsk + scs_load_current .else add x21, sp, #PT_REGS_SIZE get_current_task tsk @@ -311,13 +311,16 @@ alternative_else_nop_endif .endif #ifdef CONFIG_ARM64_PSEUDO_NMI - /* Save pmr */ -alternative_if ARM64_HAS_IRQ_PRIO_MASKING +alternative_if_not ARM64_HAS_GIC_PRIO_MASKING + b .Lskip_pmr_save\@ +alternative_else_nop_endif + mrs_s x20, SYS_ICC_PMR_EL1 str x20, [sp, #S_PMR_SAVE] mov x20, #GIC_PRIO_IRQON | GIC_PRIO_PSR_I_SET msr_s SYS_ICC_PMR_EL1, x20 -alternative_else_nop_endif + +.Lskip_pmr_save\@: #endif /* @@ -336,15 +339,19 @@ alternative_else_nop_endif .endif #ifdef CONFIG_ARM64_PSEUDO_NMI - /* Restore pmr */ -alternative_if ARM64_HAS_IRQ_PRIO_MASKING +alternative_if_not ARM64_HAS_GIC_PRIO_MASKING + b .Lskip_pmr_restore\@ +alternative_else_nop_endif + ldr x20, [sp, #S_PMR_SAVE] msr_s SYS_ICC_PMR_EL1, x20 - mrs_s x21, SYS_ICC_CTLR_EL1 - tbz x21, #6, .L__skip_pmr_sync\@ // Check for ICC_CTLR_EL1.PMHE - dsb sy // Ensure priority change is seen by redistributor -.L__skip_pmr_sync\@: + + /* Ensure priority change is seen by redistributor */ +alternative_if_not ARM64_HAS_GIC_PRIO_RELAXED_SYNC + dsb sy alternative_else_nop_endif + +.Lskip_pmr_restore\@: #endif ldp x21, x22, [sp, #S_PC] // load ELR, SPSR @@ -848,7 +855,7 @@ SYM_FUNC_START(cpu_switch_to) msr sp_el0, x1 ptrauth_keys_install_kernel x1, x8, x9, x10 scs_save x0 - scs_load x1 + scs_load_current ret SYM_FUNC_END(cpu_switch_to) NOKPROBE(cpu_switch_to) @@ -876,19 +883,19 @@ NOKPROBE(ret_from_fork) */ SYM_FUNC_START(call_on_irq_stack) #ifdef CONFIG_SHADOW_CALL_STACK - stp scs_sp, xzr, [sp, #-16]! + get_current_task x16 + scs_save x16 ldr_this_cpu scs_sp, irq_shadow_call_stack_ptr, x17 #endif + /* Create a frame record to save our LR and SP (implicit in FP) */ stp x29, x30, [sp, #-16]! mov x29, sp ldr_this_cpu x16, irq_stack_ptr, x17 - mov x15, #IRQ_STACK_SIZE - add x16, x16, x15 /* Move to the new stack and call the function there */ - mov sp, x16 + add sp, x16, #IRQ_STACK_SIZE blr x1 /* @@ -897,9 +904,7 @@ SYM_FUNC_START(call_on_irq_stack) */ mov sp, x29 ldp x29, x30, [sp], #16 -#ifdef CONFIG_SHADOW_CALL_STACK - ldp scs_sp, xzr, [sp], #16 -#endif + scs_load_current ret SYM_FUNC_END(call_on_irq_stack) NOKPROBE(call_on_irq_stack) diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c index dcc81e7200d4..692dfefbe0ed 100644 --- a/arch/arm64/kernel/fpsimd.c +++ b/arch/arm64/kernel/fpsimd.c @@ -299,7 +299,7 @@ void task_set_vl_onexec(struct task_struct *task, enum vec_type type, /* * TIF_SME controls whether a task can use SME without trapping while * in userspace, when TIF_SME is set then we must have storage - * alocated in sve_state and za_state to store the contents of both ZA + * alocated in sve_state and sme_state to store the contents of both ZA * and the SVE registers for both streaming and non-streaming modes. * * If both SVCR.ZA and SVCR.SM are disabled then at any point we @@ -385,7 +385,7 @@ static void task_fpsimd_load(void) WARN_ON(!system_supports_fpsimd()); WARN_ON(!have_cpu_fpsimd_context()); - if (system_supports_sve()) { + if (system_supports_sve() || system_supports_sme()) { switch (current->thread.fp_type) { case FP_STATE_FPSIMD: /* Stop tracking SVE for this task until next use. */ @@ -429,7 +429,8 @@ static void task_fpsimd_load(void) write_sysreg_s(current->thread.svcr, SYS_SVCR); if (thread_za_enabled(¤t->thread)) - za_load_state(current->thread.za_state); + sme_load_state(current->thread.sme_state, + system_supports_sme2()); if (thread_sm_enabled(¤t->thread)) restore_ffr = system_supports_fa64(); @@ -490,7 +491,8 @@ static void fpsimd_save(void) *svcr = read_sysreg_s(SYS_SVCR); if (*svcr & SVCR_ZA_MASK) - za_save_state(last->za_state); + sme_save_state(last->sme_state, + system_supports_sme2()); /* If we are in streaming mode override regular SVE. */ if (*svcr & SVCR_SM_MASK) { @@ -1257,30 +1259,30 @@ void fpsimd_release_task(struct task_struct *dead_task) #ifdef CONFIG_ARM64_SME /* - * Ensure that task->thread.za_state is allocated and sufficiently large. + * Ensure that task->thread.sme_state is allocated and sufficiently large. * * This function should be used only in preparation for replacing - * task->thread.za_state with new data. The memory is always zeroed + * task->thread.sme_state with new data. The memory is always zeroed * here to prevent stale data from showing through: this is done in * the interest of testability and predictability, the architecture * guarantees that when ZA is enabled it will be zeroed. */ void sme_alloc(struct task_struct *task) { - if (task->thread.za_state) { - memset(task->thread.za_state, 0, za_state_size(task)); + if (task->thread.sme_state) { + memset(task->thread.sme_state, 0, sme_state_size(task)); return; } /* This could potentially be up to 64K. */ - task->thread.za_state = - kzalloc(za_state_size(task), GFP_KERNEL); + task->thread.sme_state = + kzalloc(sme_state_size(task), GFP_KERNEL); } static void sme_free(struct task_struct *task) { - kfree(task->thread.za_state); - task->thread.za_state = NULL; + kfree(task->thread.sme_state); + task->thread.sme_state = NULL; } void sme_kernel_enable(const struct arm64_cpu_capabilities *__always_unused p) @@ -1302,6 +1304,17 @@ void sme_kernel_enable(const struct arm64_cpu_capabilities *__always_unused p) * This must be called after sme_kernel_enable(), we rely on the * feature table being sorted to ensure this. */ +void sme2_kernel_enable(const struct arm64_cpu_capabilities *__always_unused p) +{ + /* Allow use of ZT0 */ + write_sysreg_s(read_sysreg_s(SYS_SMCR_EL1) | SMCR_ELx_EZT0_MASK, + SYS_SMCR_EL1); +} + +/* + * This must be called after sme_kernel_enable(), we rely on the + * feature table being sorted to ensure this. + */ void fa64_kernel_enable(const struct arm64_cpu_capabilities *__always_unused p) { /* Allow use of FA64 */ @@ -1322,7 +1335,6 @@ u64 read_smcr_features(void) unsigned int vq_max; sme_kernel_enable(NULL); - sme_smstart_sm(); /* * Set the maximum possible VL. @@ -1332,11 +1344,9 @@ u64 read_smcr_features(void) smcr = read_sysreg_s(SYS_SMCR_EL1); smcr &= ~(u64)SMCR_ELx_LEN_MASK; /* Only the LEN field */ - vq_max = sve_vq_from_vl(sve_get_vl()); + vq_max = sve_vq_from_vl(sme_get_vl()); smcr |= vq_max - 1; /* set LEN field to maximum effective value */ - sme_smstop_sm(); - return smcr; } @@ -1488,7 +1498,7 @@ void do_sme_acc(unsigned long esr, struct pt_regs *regs) sve_alloc(current, false); sme_alloc(current); - if (!current->thread.sve_state || !current->thread.za_state) { + if (!current->thread.sve_state || !current->thread.sme_state) { force_sig(SIGKILL); return; } @@ -1609,7 +1619,7 @@ static void fpsimd_flush_thread_vl(enum vec_type type) void fpsimd_flush_thread(void) { void *sve_state = NULL; - void *za_state = NULL; + void *sme_state = NULL; if (!system_supports_fpsimd()) return; @@ -1634,8 +1644,8 @@ void fpsimd_flush_thread(void) clear_thread_flag(TIF_SME); /* Defer kfree() while in atomic context */ - za_state = current->thread.za_state; - current->thread.za_state = NULL; + sme_state = current->thread.sme_state; + current->thread.sme_state = NULL; fpsimd_flush_thread_vl(ARM64_VEC_SME); current->thread.svcr = 0; @@ -1645,7 +1655,7 @@ void fpsimd_flush_thread(void) put_cpu_fpsimd_context(); kfree(sve_state); - kfree(za_state); + kfree(sme_state); } /* @@ -1711,7 +1721,7 @@ static void fpsimd_bind_task_to_cpu(void) WARN_ON(!system_supports_fpsimd()); last->st = ¤t->thread.uw.fpsimd_state; last->sve_state = current->thread.sve_state; - last->za_state = current->thread.za_state; + last->sme_state = current->thread.sme_state; last->sve_vl = task_get_sve_vl(current); last->sme_vl = task_get_sme_vl(current); last->svcr = ¤t->thread.svcr; diff --git a/arch/arm64/kernel/ftrace.c b/arch/arm64/kernel/ftrace.c index b30b955a8921..5545fe1a9012 100644 --- a/arch/arm64/kernel/ftrace.c +++ b/arch/arm64/kernel/ftrace.c @@ -60,6 +60,89 @@ int ftrace_regs_query_register_offset(const char *name) } #endif +unsigned long ftrace_call_adjust(unsigned long addr) +{ + /* + * When using mcount, addr is the address of the mcount call + * instruction, and no adjustment is necessary. + */ + if (!IS_ENABLED(CONFIG_DYNAMIC_FTRACE_WITH_ARGS)) + return addr; + + /* + * When using patchable-function-entry without pre-function NOPS, addr + * is the address of the first NOP after the function entry point. + * + * The compiler has either generated: + * + * addr+00: func: NOP // To be patched to MOV X9, LR + * addr+04: NOP // To be patched to BL <caller> + * + * Or: + * + * addr-04: BTI C + * addr+00: func: NOP // To be patched to MOV X9, LR + * addr+04: NOP // To be patched to BL <caller> + * + * We must adjust addr to the address of the NOP which will be patched + * to `BL <caller>`, which is at `addr + 4` bytes in either case. + * + */ + if (!IS_ENABLED(CONFIG_DYNAMIC_FTRACE_WITH_CALL_OPS)) + return addr + AARCH64_INSN_SIZE; + + /* + * When using patchable-function-entry with pre-function NOPs, addr is + * the address of the first pre-function NOP. + * + * Starting from an 8-byte aligned base, the compiler has either + * generated: + * + * addr+00: NOP // Literal (first 32 bits) + * addr+04: NOP // Literal (last 32 bits) + * addr+08: func: NOP // To be patched to MOV X9, LR + * addr+12: NOP // To be patched to BL <caller> + * + * Or: + * + * addr+00: NOP // Literal (first 32 bits) + * addr+04: NOP // Literal (last 32 bits) + * addr+08: func: BTI C + * addr+12: NOP // To be patched to MOV X9, LR + * addr+16: NOP // To be patched to BL <caller> + * + * We must adjust addr to the address of the NOP which will be patched + * to `BL <caller>`, which is at either addr+12 or addr+16 depending on + * whether there is a BTI. + */ + + if (!IS_ALIGNED(addr, sizeof(unsigned long))) { + WARN_RATELIMIT(1, "Misaligned patch-site %pS\n", + (void *)(addr + 8)); + return 0; + } + + /* Skip the NOPs placed before the function entry point */ + addr += 2 * AARCH64_INSN_SIZE; + + /* Skip any BTI */ + if (IS_ENABLED(CONFIG_ARM64_BTI_KERNEL)) { + u32 insn = le32_to_cpu(*(__le32 *)addr); + + if (aarch64_insn_is_bti(insn)) { + addr += AARCH64_INSN_SIZE; + } else if (insn != aarch64_insn_gen_nop()) { + WARN_RATELIMIT(1, "unexpected insn in patch-site %pS: 0x%08x\n", + (void *)addr, insn); + } + } + + /* Skip the first NOP after function entry */ + addr += AARCH64_INSN_SIZE; + + return addr; +} + /* * Replace a single instruction, which may be a branch or NOP. * If @validate == true, a replaced instruction is checked against 'old'. @@ -98,6 +181,13 @@ int ftrace_update_ftrace_func(ftrace_func_t func) unsigned long pc; u32 new; + /* + * When using CALL_OPS, the function to call is associated with the + * call site, and we don't have a global function pointer to update. + */ + if (IS_ENABLED(CONFIG_DYNAMIC_FTRACE_WITH_CALL_OPS)) + return 0; + pc = (unsigned long)ftrace_call; new = aarch64_insn_gen_branch_imm(pc, (unsigned long)func, AARCH64_INSN_BRANCH_LINK); @@ -176,6 +266,44 @@ static bool ftrace_find_callable_addr(struct dyn_ftrace *rec, return true; } +#ifdef CONFIG_DYNAMIC_FTRACE_WITH_CALL_OPS +static const struct ftrace_ops *arm64_rec_get_ops(struct dyn_ftrace *rec) +{ + const struct ftrace_ops *ops = NULL; + + if (rec->flags & FTRACE_FL_CALL_OPS_EN) { + ops = ftrace_find_unique_ops(rec); + WARN_ON_ONCE(!ops); + } + + if (!ops) + ops = &ftrace_list_ops; + + return ops; +} + +static int ftrace_rec_set_ops(const struct dyn_ftrace *rec, + const struct ftrace_ops *ops) +{ + unsigned long literal = ALIGN_DOWN(rec->ip - 12, 8); + return aarch64_insn_write_literal_u64((void *)literal, + (unsigned long)ops); +} + +static int ftrace_rec_set_nop_ops(struct dyn_ftrace *rec) +{ + return ftrace_rec_set_ops(rec, &ftrace_nop_ops); +} + +static int ftrace_rec_update_ops(struct dyn_ftrace *rec) +{ + return ftrace_rec_set_ops(rec, arm64_rec_get_ops(rec)); +} +#else +static int ftrace_rec_set_nop_ops(struct dyn_ftrace *rec) { return 0; } +static int ftrace_rec_update_ops(struct dyn_ftrace *rec) { return 0; } +#endif + /* * Turn on the call to ftrace_caller() in instrumented function */ @@ -183,6 +311,11 @@ int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) { unsigned long pc = rec->ip; u32 old, new; + int ret; + + ret = ftrace_rec_update_ops(rec); + if (ret) + return ret; if (!ftrace_find_callable_addr(rec, NULL, &addr)) return -EINVAL; @@ -193,6 +326,19 @@ int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) return ftrace_modify_code(pc, old, new, true); } +#ifdef CONFIG_DYNAMIC_FTRACE_WITH_CALL_OPS +int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr, + unsigned long addr) +{ + if (WARN_ON_ONCE(old_addr != (unsigned long)ftrace_caller)) + return -EINVAL; + if (WARN_ON_ONCE(addr != (unsigned long)ftrace_caller)) + return -EINVAL; + + return ftrace_rec_update_ops(rec); +} +#endif + #ifdef CONFIG_DYNAMIC_FTRACE_WITH_ARGS /* * The compiler has inserted two NOPs before the regular function prologue. @@ -209,7 +355,7 @@ int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) * | NOP | MOV X9, LR | MOV X9, LR | * | NOP | NOP | BL <entry> | * - * The LR value will be recovered by ftrace_regs_entry, and restored into LR + * The LR value will be recovered by ftrace_caller, and restored into LR * before returning to the regular function prologue. When a function is not * being traced, the MOV is not harmful given x9 is not live per the AAPCS. * @@ -220,6 +366,11 @@ int ftrace_init_nop(struct module *mod, struct dyn_ftrace *rec) { unsigned long pc = rec->ip - AARCH64_INSN_SIZE; u32 old, new; + int ret; + + ret = ftrace_rec_set_nop_ops(rec); + if (ret) + return ret; old = aarch64_insn_gen_nop(); new = aarch64_insn_gen_move_reg(AARCH64_INSN_REG_9, @@ -237,9 +388,14 @@ int ftrace_make_nop(struct module *mod, struct dyn_ftrace *rec, { unsigned long pc = rec->ip; u32 old = 0, new; + int ret; new = aarch64_insn_gen_nop(); + ret = ftrace_rec_set_nop_ops(rec); + if (ret) + return ret; + /* * When using mcount, callsites in modules may have been initalized to * call an arbitrary module PLT (which redirects to the _mcount stub) diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S index 952e17bd1c0b..b98970907226 100644 --- a/arch/arm64/kernel/head.S +++ b/arch/arm64/kernel/head.S @@ -70,13 +70,14 @@ __EFI_PE_HEADER - __INIT + .section ".idmap.text","a" /* * The following callee saved general purpose registers are used on the * primary lowlevel boot path: * * Register Scope Purpose + * x19 primary_entry() .. start_kernel() whether we entered with the MMU on * x20 primary_entry() .. __primary_switch() CPU boot mode * x21 primary_entry() .. start_kernel() FDT pointer passed at boot in x0 * x22 create_idmap() .. start_kernel() ID map VA of the DT blob @@ -86,10 +87,23 @@ * x28 create_idmap() callee preserved temp register */ SYM_CODE_START(primary_entry) + bl record_mmu_state bl preserve_boot_args + bl create_idmap + + /* + * If we entered with the MMU and caches on, clean the ID mapped part + * of the primary boot code to the PoC so we can safely execute it with + * the MMU off. + */ + cbz x19, 0f + adrp x0, __idmap_text_start + adr_l x1, __idmap_text_end + adr_l x2, dcache_clean_poc + blr x2 +0: mov x0, x19 bl init_kernel_el // w0=cpu_boot_mode mov x20, x0 - bl create_idmap /* * The following calls CPU setup code, see arch/arm64/mm/proc.S for @@ -109,6 +123,40 @@ SYM_CODE_START(primary_entry) b __primary_switch SYM_CODE_END(primary_entry) + __INIT +SYM_CODE_START_LOCAL(record_mmu_state) + mrs x19, CurrentEL + cmp x19, #CurrentEL_EL2 + mrs x19, sctlr_el1 + b.ne 0f + mrs x19, sctlr_el2 +0: +CPU_LE( tbnz x19, #SCTLR_ELx_EE_SHIFT, 1f ) +CPU_BE( tbz x19, #SCTLR_ELx_EE_SHIFT, 1f ) + tst x19, #SCTLR_ELx_C // Z := (C == 0) + and x19, x19, #SCTLR_ELx_M // isolate M bit + csel x19, xzr, x19, eq // clear x19 if Z + ret + + /* + * Set the correct endianness early so all memory accesses issued + * before init_kernel_el() occur in the correct byte order. Note that + * this means the MMU must be disabled, or the active ID map will end + * up getting interpreted with the wrong byte order. + */ +1: eor x19, x19, #SCTLR_ELx_EE + bic x19, x19, #SCTLR_ELx_M + b.ne 2f + pre_disable_mmu_workaround + msr sctlr_el2, x19 + b 3f + pre_disable_mmu_workaround +2: msr sctlr_el1, x19 +3: isb + mov x19, xzr + ret +SYM_CODE_END(record_mmu_state) + /* * Preserve the arguments passed by the bootloader in x0 .. x3 */ @@ -119,11 +167,14 @@ SYM_CODE_START_LOCAL(preserve_boot_args) stp x21, x1, [x0] // x0 .. x3 at kernel entry stp x2, x3, [x0, #16] + cbnz x19, 0f // skip cache invalidation if MMU is on dmb sy // needed before dc ivac with // MMU off add x1, x0, #0x20 // 4 x 8 bytes b dcache_inval_poc // tail call +0: str_l x19, mmu_enabled_at_boot, x0 + ret SYM_CODE_END(preserve_boot_args) SYM_FUNC_START_LOCAL(clear_page_tables) @@ -360,12 +411,13 @@ SYM_FUNC_START_LOCAL(create_idmap) * accesses (MMU disabled), invalidate those tables again to * remove any speculatively loaded cache lines. */ + cbnz x19, 0f // skip cache invalidation if MMU is on dmb sy adrp x0, init_idmap_pg_dir adrp x1, init_idmap_pg_end bl dcache_inval_poc - ret x28 +0: ret x28 SYM_FUNC_END(create_idmap) SYM_FUNC_START_LOCAL(create_kernel_mapping) @@ -404,7 +456,7 @@ SYM_FUNC_END(create_kernel_mapping) stp xzr, xzr, [sp, #S_STACKFRAME] add x29, sp, #S_STACKFRAME - scs_load \tsk + scs_load_current adr_l \tmp1, __per_cpu_offset ldr w\tmp2, [\tsk, #TSK_TI_CPU] @@ -476,7 +528,7 @@ SYM_FUNC_END(__primary_switched) * end early head section, begin head code that is also used for * hotplug and needs to have the same protections as the text region */ - .section ".idmap.text","awx" + .section ".idmap.text","a" /* * Starting from EL2 or EL1, configure the CPU to execute at the highest @@ -489,14 +541,17 @@ SYM_FUNC_END(__primary_switched) * Returns either BOOT_CPU_MODE_EL1 or BOOT_CPU_MODE_EL2 in x0 if * booted in EL1 or EL2 respectively, with the top 32 bits containing * potential context flags. These flags are *not* stored in __boot_cpu_mode. + * + * x0: whether we are being called from the primary boot path with the MMU on */ SYM_FUNC_START(init_kernel_el) - mrs x0, CurrentEL - cmp x0, #CurrentEL_EL2 + mrs x1, CurrentEL + cmp x1, #CurrentEL_EL2 b.eq init_el2 SYM_INNER_LABEL(init_el1, SYM_L_LOCAL) mov_q x0, INIT_SCTLR_EL1_MMU_OFF + pre_disable_mmu_workaround msr sctlr_el1, x0 isb mov_q x0, INIT_PSTATE_EL1 @@ -506,6 +561,15 @@ SYM_INNER_LABEL(init_el1, SYM_L_LOCAL) eret SYM_INNER_LABEL(init_el2, SYM_L_LOCAL) + msr elr_el2, lr + + // clean all HYP code to the PoC if we booted at EL2 with the MMU on + cbz x0, 0f + adrp x0, __hyp_idmap_text_start + adr_l x1, __hyp_text_end + adr_l x2, dcache_clean_poc + blr x2 +0: mov_q x0, HCR_HOST_NVHE_FLAGS msr hcr_el2, x0 isb @@ -529,38 +593,27 @@ SYM_INNER_LABEL(init_el2, SYM_L_LOCAL) cbz x0, 1f /* Set a sane SCTLR_EL1, the VHE way */ + pre_disable_mmu_workaround msr_s SYS_SCTLR_EL12, x1 mov x2, #BOOT_CPU_FLAG_E2H b 2f 1: + pre_disable_mmu_workaround msr sctlr_el1, x1 mov x2, xzr 2: - msr elr_el2, lr mov w0, #BOOT_CPU_MODE_EL2 orr x0, x0, x2 eret SYM_FUNC_END(init_kernel_el) -/* - * Sets the __boot_cpu_mode flag depending on the CPU boot mode passed - * in w0. See arch/arm64/include/asm/virt.h for more info. - */ -SYM_FUNC_START_LOCAL(set_cpu_boot_mode_flag) - adr_l x1, __boot_cpu_mode - cmp w0, #BOOT_CPU_MODE_EL2 - b.ne 1f - add x1, x1, #4 -1: str w0, [x1] // Save CPU boot mode - ret -SYM_FUNC_END(set_cpu_boot_mode_flag) - /* * This provides a "holding pen" for platforms to hold all secondary * cores are held until we're ready for them to initialise. */ SYM_FUNC_START(secondary_holding_pen) + mov x0, xzr bl init_kernel_el // w0=cpu_boot_mode mrs x2, mpidr_el1 mov_q x1, MPIDR_HWID_BITMASK @@ -578,6 +631,7 @@ SYM_FUNC_END(secondary_holding_pen) * be used where CPUs are brought online dynamically by the kernel. */ SYM_FUNC_START(secondary_entry) + mov x0, xzr bl init_kernel_el // w0=cpu_boot_mode b secondary_startup SYM_FUNC_END(secondary_entry) @@ -587,7 +641,6 @@ SYM_FUNC_START_LOCAL(secondary_startup) * Common entry point for secondary CPUs. */ mov x20, x0 // preserve boot mode - bl finalise_el2 bl __cpu_secondary_check52bitva #if VA_BITS > 48 ldr_l x0, vabits_actual @@ -600,9 +653,14 @@ SYM_FUNC_START_LOCAL(secondary_startup) br x8 SYM_FUNC_END(secondary_startup) + .text SYM_FUNC_START_LOCAL(__secondary_switched) mov x0, x20 bl set_cpu_boot_mode_flag + + mov x0, x20 + bl finalise_el2 + str_l xzr, __early_cpu_boot_status, x3 adr_l x5, vectors msr vbar_el1, x5 @@ -629,6 +687,19 @@ SYM_FUNC_START_LOCAL(__secondary_too_slow) SYM_FUNC_END(__secondary_too_slow) /* + * Sets the __boot_cpu_mode flag depending on the CPU boot mode passed + * in w0. See arch/arm64/include/asm/virt.h for more info. + */ +SYM_FUNC_START_LOCAL(set_cpu_boot_mode_flag) + adr_l x1, __boot_cpu_mode + cmp w0, #BOOT_CPU_MODE_EL2 + b.ne 1f + add x1, x1, #4 +1: str w0, [x1] // Save CPU boot mode + ret +SYM_FUNC_END(set_cpu_boot_mode_flag) + +/* * The booting CPU updates the failed status @__early_cpu_boot_status, * with MMU turned off. * @@ -659,6 +730,7 @@ SYM_FUNC_END(__secondary_too_slow) * Checks if the selected granule size is supported by the CPU. * If it isn't, park the CPU */ + .section ".idmap.text","a" SYM_FUNC_START(__enable_mmu) mrs x3, ID_AA64MMFR0_EL1 ubfx x3, x3, #ID_AA64MMFR0_EL1_TGRAN_SHIFT, 4 diff --git a/arch/arm64/kernel/hyp-stub.S b/arch/arm64/kernel/hyp-stub.S index 2ee18c860f2a..111ff33d93ee 100644 --- a/arch/arm64/kernel/hyp-stub.S +++ b/arch/arm64/kernel/hyp-stub.S @@ -132,6 +132,13 @@ SYM_CODE_START_LOCAL(__finalise_el2) orr x0, x0, SMCR_ELx_FA64_MASK .Lskip_sme_fa64: + // ZT0 available? + mrs_s x1, SYS_ID_AA64SMFR0_EL1 + __check_override id_aa64smfr0 ID_AA64SMFR0_EL1_SMEver_SHIFT 4 .Linit_sme_zt0 .Lskip_sme_zt0 +.Linit_sme_zt0: + orr x0, x0, SMCR_ELx_EZT0_MASK +.Lskip_sme_zt0: + orr x0, x0, #SMCR_ELx_LEN_MASK // Enable full SME vector msr_s SYS_SMCR_EL2, x0 // length for EL1. diff --git a/arch/arm64/kernel/idle.c b/arch/arm64/kernel/idle.c index a2cfbacec2bb..c1125753fe9b 100644 --- a/arch/arm64/kernel/idle.c +++ b/arch/arm64/kernel/idle.c @@ -42,5 +42,4 @@ void noinstr arch_cpu_idle(void) * tricks */ cpu_do_idle(); - raw_local_irq_enable(); } diff --git a/arch/arm64/kernel/idreg-override.c b/arch/arm64/kernel/idreg-override.c index 95133765ed29..d833d78a7f31 100644 --- a/arch/arm64/kernel/idreg-override.c +++ b/arch/arm64/kernel/idreg-override.c @@ -131,6 +131,7 @@ static const struct ftr_set_desc smfr0 __initconst = { .name = "id_aa64smfr0", .override = &id_aa64smfr0_override, .fields = { + FIELD("smever", ID_AA64SMFR0_EL1_SMEver_SHIFT, NULL), /* FA64 is a one bit field... :-/ */ { "fa64", ID_AA64SMFR0_EL1_FA64_SHIFT, 1, }, {} diff --git a/arch/arm64/kernel/image-vars.h b/arch/arm64/kernel/image-vars.h index d0e9bb5c91fc..8309197c0ebd 100644 --- a/arch/arm64/kernel/image-vars.h +++ b/arch/arm64/kernel/image-vars.h @@ -10,7 +10,7 @@ #error This file should only be included in vmlinux.lds.S #endif -PROVIDE(__efistub_primary_entry_offset = primary_entry - _text); +PROVIDE(__efistub_primary_entry = primary_entry); /* * The EFI stub has its own symbol namespace prefixed by __efistub_, to @@ -21,10 +21,11 @@ PROVIDE(__efistub_primary_entry_offset = primary_entry - _text); * linked at. The routines below are all implemented in assembler in a * position independent manner */ -PROVIDE(__efistub_dcache_clean_poc = __pi_dcache_clean_poc); +PROVIDE(__efistub_caches_clean_inval_pou = __pi_caches_clean_inval_pou); PROVIDE(__efistub__text = _text); PROVIDE(__efistub__end = _end); +PROVIDE(__efistub___inittext_end = __inittext_end); PROVIDE(__efistub__edata = _edata); PROVIDE(__efistub_screen_info = screen_info); PROVIDE(__efistub__ctype = _ctype); @@ -67,9 +68,7 @@ KVM_NVHE_ALIAS(__hyp_stub_vectors); KVM_NVHE_ALIAS(vgic_v2_cpuif_trap); KVM_NVHE_ALIAS(vgic_v3_cpuif_trap); -/* Static key checked in pmr_sync(). */ #ifdef CONFIG_ARM64_PSEUDO_NMI -KVM_NVHE_ALIAS(gic_pmr_sync); /* Static key checked in GIC_PRIO_IRQOFF. */ KVM_NVHE_ALIAS(gic_nonsecure_priorities); #endif diff --git a/arch/arm64/kernel/patch-scs.c b/arch/arm64/kernel/patch-scs.c index 1b3da02d5b74..a1fe4b4ff591 100644 --- a/arch/arm64/kernel/patch-scs.c +++ b/arch/arm64/kernel/patch-scs.c @@ -130,7 +130,8 @@ struct eh_frame { static int noinstr scs_handle_fde_frame(const struct eh_frame *frame, bool fde_has_augmentation_data, - int code_alignment_factor) + int code_alignment_factor, + bool dry_run) { int size = frame->size - offsetof(struct eh_frame, opcodes) + 4; u64 loc = (u64)offset_to_ptr(&frame->initial_loc); @@ -184,7 +185,8 @@ static int noinstr scs_handle_fde_frame(const struct eh_frame *frame, break; case DW_CFA_negate_ra_state: - scs_patch_loc(loc - 4); + if (!dry_run) + scs_patch_loc(loc - 4); break; case 0x40 ... 0x7f: @@ -235,9 +237,12 @@ int noinstr scs_patch(const u8 eh_frame[], int size) } else { ret = scs_handle_fde_frame(frame, fde_has_augmentation_data, - code_alignment_factor); + code_alignment_factor, + true); if (ret) return ret; + scs_handle_fde_frame(frame, fde_has_augmentation_data, + code_alignment_factor, false); } p += sizeof(frame->size) + frame->size; diff --git a/arch/arm64/kernel/patching.c b/arch/arm64/kernel/patching.c index 33e0fabc0b79..b4835f6d594b 100644 --- a/arch/arm64/kernel/patching.c +++ b/arch/arm64/kernel/patching.c @@ -88,6 +88,23 @@ int __kprobes aarch64_insn_write(void *addr, u32 insn) return __aarch64_insn_write(addr, cpu_to_le32(insn)); } +noinstr int aarch64_insn_write_literal_u64(void *addr, u64 val) +{ + u64 *waddr; + unsigned long flags; + int ret; + + raw_spin_lock_irqsave(&patch_lock, flags); + waddr = patch_map(addr, FIX_TEXT_POKE0); + + ret = copy_to_kernel_nofault(waddr, &val, sizeof(val)); + + patch_unmap(FIX_TEXT_POKE0); + raw_spin_unlock_irqrestore(&patch_lock, flags); + + return ret; +} + int __kprobes aarch64_insn_patch_text_nosync(void *addr, u32 insn) { u32 *tp = addr; diff --git a/arch/arm64/kernel/perf_event.c b/arch/arm64/kernel/perf_event.c index a5193f2146a6..dde06c0f97f3 100644 --- a/arch/arm64/kernel/perf_event.c +++ b/arch/arm64/kernel/perf_event.c @@ -1023,12 +1023,6 @@ static int armv8pmu_set_event_filter(struct hw_perf_event *event, return 0; } -static bool armv8pmu_filter(struct pmu *pmu, int cpu) -{ - struct arm_pmu *armpmu = to_arm_pmu(pmu); - return !cpumask_test_cpu(smp_processor_id(), &armpmu->supported_cpus); -} - static void armv8pmu_reset(void *info) { struct arm_pmu *cpu_pmu = (struct arm_pmu *)info; @@ -1069,6 +1063,14 @@ static int __armv8_pmuv3_map_event(struct perf_event *event, &armv8_pmuv3_perf_cache_map, ARMV8_PMU_EVTYPE_EVENT); + /* + * CHAIN events only work when paired with an adjacent counter, and it + * never makes sense for a user to open one in isolation, as they'll be + * rotated arbitrarily. + */ + if (hw_event_id == ARMV8_PMUV3_PERFCTR_CHAIN) + return -EINVAL; + if (armv8pmu_event_is_64bit(event)) event->hw.flags |= ARMPMU_EVT_64BIT; @@ -1258,7 +1260,6 @@ static int armv8_pmu_init(struct arm_pmu *cpu_pmu, char *name, cpu_pmu->stop = armv8pmu_stop; cpu_pmu->reset = armv8pmu_reset; cpu_pmu->set_event_filter = armv8pmu_set_event_filter; - cpu_pmu->filter = armv8pmu_filter; cpu_pmu->pmu.event_idx = armv8pmu_user_event_idx; diff --git a/arch/arm64/kernel/probes/kprobes.c b/arch/arm64/kernel/probes/kprobes.c index f35d059a9a36..70b91a8c6bb3 100644 --- a/arch/arm64/kernel/probes/kprobes.c +++ b/arch/arm64/kernel/probes/kprobes.c @@ -387,10 +387,6 @@ int __init arch_populate_kprobe_blacklist(void) (unsigned long)__irqentry_text_end); if (ret) return ret; - ret = kprobe_add_area_blacklist((unsigned long)__idmap_text_start, - (unsigned long)__idmap_text_end); - if (ret) - return ret; ret = kprobe_add_area_blacklist((unsigned long)__hyp_text_start, (unsigned long)__hyp_text_end); if (ret || is_kernel_in_hyp_mode()) diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c index 269ac1c25ae2..71d59b5abede 100644 --- a/arch/arm64/kernel/process.c +++ b/arch/arm64/kernel/process.c @@ -307,27 +307,28 @@ int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src) /* * In the unlikely event that we create a new thread with ZA - * enabled we should retain the ZA state so duplicate it here. - * This may be shortly freed if we exec() or if CLONE_SETTLS - * but it's simpler to do it here. To avoid confusing the rest - * of the code ensure that we have a sve_state allocated - * whenever za_state is allocated. + * enabled we should retain the ZA and ZT state so duplicate + * it here. This may be shortly freed if we exec() or if + * CLONE_SETTLS but it's simpler to do it here. To avoid + * confusing the rest of the code ensure that we have a + * sve_state allocated whenever sme_state is allocated. */ if (thread_za_enabled(&src->thread)) { dst->thread.sve_state = kzalloc(sve_state_size(src), GFP_KERNEL); if (!dst->thread.sve_state) return -ENOMEM; - dst->thread.za_state = kmemdup(src->thread.za_state, - za_state_size(src), - GFP_KERNEL); - if (!dst->thread.za_state) { + + dst->thread.sme_state = kmemdup(src->thread.sme_state, + sme_state_size(src), + GFP_KERNEL); + if (!dst->thread.sme_state) { kfree(dst->thread.sve_state); dst->thread.sve_state = NULL; return -ENOMEM; } } else { - dst->thread.za_state = NULL; + dst->thread.sme_state = NULL; clear_tsk_thread_flag(dst, TIF_SME); } diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c index 2686ab157601..d7f4f0d1ae12 100644 --- a/arch/arm64/kernel/ptrace.c +++ b/arch/arm64/kernel/ptrace.c @@ -683,7 +683,7 @@ static int tls_set(struct task_struct *target, const struct user_regset *regset, unsigned long tls[2]; tls[0] = target->thread.uw.tp_value; - if (system_supports_sme()) + if (system_supports_tpidr2()) tls[1] = target->thread.tpidr2_el0; ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, tls, 0, count); @@ -691,7 +691,7 @@ static int tls_set(struct task_struct *target, const struct user_regset *regset, return ret; target->thread.uw.tp_value = tls[0]; - if (system_supports_sme()) + if (system_supports_tpidr2()) target->thread.tpidr2_el0 = tls[1]; return ret; @@ -1045,7 +1045,7 @@ static int za_get(struct task_struct *target, if (thread_za_enabled(&target->thread)) { start = end; end = ZA_PT_SIZE(vq); - membuf_write(&to, target->thread.za_state, end - start); + membuf_write(&to, target->thread.sme_state, end - start); } /* Zero any trailing padding */ @@ -1099,7 +1099,7 @@ static int za_set(struct task_struct *target, /* Allocate/reinit ZA storage */ sme_alloc(target); - if (!target->thread.za_state) { + if (!target->thread.sme_state) { ret = -ENOMEM; goto out; } @@ -1124,7 +1124,7 @@ static int za_set(struct task_struct *target, start = ZA_PT_ZA_OFFSET; end = ZA_PT_SIZE(vq); ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, - target->thread.za_state, + target->thread.sme_state, start, end); if (ret) goto out; @@ -1138,6 +1138,51 @@ out: return ret; } +static int zt_get(struct task_struct *target, + const struct user_regset *regset, + struct membuf to) +{ + if (!system_supports_sme2()) + return -EINVAL; + + /* + * If PSTATE.ZA is not set then ZT will be zeroed when it is + * enabled so report the current register value as zero. + */ + if (thread_za_enabled(&target->thread)) + membuf_write(&to, thread_zt_state(&target->thread), + ZT_SIG_REG_BYTES); + else + membuf_zero(&to, ZT_SIG_REG_BYTES); + + return 0; +} + +static int zt_set(struct task_struct *target, + const struct user_regset *regset, + unsigned int pos, unsigned int count, + const void *kbuf, const void __user *ubuf) +{ + int ret; + + if (!system_supports_sme2()) + return -EINVAL; + + if (!thread_za_enabled(&target->thread)) { + sme_alloc(target); + if (!target->thread.sme_state) + return -ENOMEM; + } + + ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, + thread_zt_state(&target->thread), + 0, ZT_SIG_REG_BYTES); + if (ret == 0) + target->thread.svcr |= SVCR_ZA_MASK; + + return ret; +} + #endif /* CONFIG_ARM64_SME */ #ifdef CONFIG_ARM64_PTR_AUTH @@ -1357,9 +1402,10 @@ enum aarch64_regset { #ifdef CONFIG_ARM64_SVE REGSET_SVE, #endif -#ifdef CONFIG_ARM64_SVE +#ifdef CONFIG_ARM64_SME REGSET_SSVE, REGSET_ZA, + REGSET_ZT, #endif #ifdef CONFIG_ARM64_PTR_AUTH REGSET_PAC_MASK, @@ -1467,6 +1513,14 @@ static const struct user_regset aarch64_regsets[] = { .regset_get = za_get, .set = za_set, }, + [REGSET_ZT] = { /* SME ZT */ + .core_note_type = NT_ARM_ZT, + .n = 1, + .size = ZT_SIG_REG_BYTES, + .align = sizeof(u64), + .regset_get = zt_get, + .set = zt_set, + }, #endif #ifdef CONFIG_ARM64_PTR_AUTH [REGSET_PAC_MASK] = { diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c index 12cfe9d0d3fa..b8ec7b3ac9cb 100644 --- a/arch/arm64/kernel/setup.c +++ b/arch/arm64/kernel/setup.c @@ -58,6 +58,7 @@ static int num_standard_resources; static struct resource *standard_resources; phys_addr_t __fdt_pointer __initdata; +u64 mmu_enabled_at_boot __initdata; /* * Standard memory resources @@ -332,8 +333,12 @@ void __init __no_sanitize_address setup_arch(char **cmdline_p) xen_early_init(); efi_init(); - if (!efi_enabled(EFI_BOOT) && ((u64)_text % MIN_KIMG_ALIGN) != 0) - pr_warn(FW_BUG "Kernel image misaligned at boot, please fix your bootloader!"); + if (!efi_enabled(EFI_BOOT)) { + if ((u64)_text % MIN_KIMG_ALIGN) + pr_warn(FW_BUG "Kernel image misaligned at boot, please fix your bootloader!"); + WARN_TAINT(mmu_enabled_at_boot, TAINT_FIRMWARE_WORKAROUND, + FW_BUG "Booted with MMU enabled!"); + } arm64_memblock_init(); @@ -442,3 +447,11 @@ static int __init register_arm64_panic_block(void) return 0; } device_initcall(register_arm64_panic_block); + +static int __init check_mmu_enabled_at_boot(void) +{ + if (!efi_enabled(EFI_BOOT) && mmu_enabled_at_boot) + panic("Non-EFI boot detected with MMU and caches enabled"); + return 0; +} +device_initcall_sync(check_mmu_enabled_at_boot); diff --git a/arch/arm64/kernel/signal.c b/arch/arm64/kernel/signal.c index e0d09bf5b01b..06a02707f488 100644 --- a/arch/arm64/kernel/signal.c +++ b/arch/arm64/kernel/signal.c @@ -56,7 +56,9 @@ struct rt_sigframe_user_layout { unsigned long fpsimd_offset; unsigned long esr_offset; unsigned long sve_offset; + unsigned long tpidr2_offset; unsigned long za_offset; + unsigned long zt_offset; unsigned long extra_offset; unsigned long end_offset; }; @@ -168,6 +170,19 @@ static void __user *apply_user_offset( return base + offset; } +struct user_ctxs { + struct fpsimd_context __user *fpsimd; + u32 fpsimd_size; + struct sve_context __user *sve; + u32 sve_size; + struct tpidr2_context __user *tpidr2; + u32 tpidr2_size; + struct za_context __user *za; + u32 za_size; + struct zt_context __user *zt; + u32 zt_size; +}; + static int preserve_fpsimd_context(struct fpsimd_context __user *ctx) { struct user_fpsimd_state const *fpsimd = @@ -186,25 +201,20 @@ static int preserve_fpsimd_context(struct fpsimd_context __user *ctx) return err ? -EFAULT : 0; } -static int restore_fpsimd_context(struct fpsimd_context __user *ctx) +static int restore_fpsimd_context(struct user_ctxs *user) { struct user_fpsimd_state fpsimd; - __u32 magic, size; int err = 0; - /* check the magic/size information */ - __get_user_error(magic, &ctx->head.magic, err); - __get_user_error(size, &ctx->head.size, err); - if (err) - return -EFAULT; - if (magic != FPSIMD_MAGIC || size != sizeof(struct fpsimd_context)) + /* check the size information */ + if (user->fpsimd_size != sizeof(struct fpsimd_context)) return -EINVAL; /* copy the FP and status/control registers */ - err = __copy_from_user(fpsimd.vregs, ctx->vregs, + err = __copy_from_user(fpsimd.vregs, &(user->fpsimd->vregs), sizeof(fpsimd.vregs)); - __get_user_error(fpsimd.fpsr, &ctx->fpsr, err); - __get_user_error(fpsimd.fpcr, &ctx->fpcr, err); + __get_user_error(fpsimd.fpsr, &(user->fpsimd->fpsr), err); + __get_user_error(fpsimd.fpcr, &(user->fpsimd->fpcr), err); clear_thread_flag(TIF_SVE); current->thread.fp_type = FP_STATE_FPSIMD; @@ -217,12 +227,6 @@ static int restore_fpsimd_context(struct fpsimd_context __user *ctx) } -struct user_ctxs { - struct fpsimd_context __user *fpsimd; - struct sve_context __user *sve; - struct za_context __user *za; -}; - #ifdef CONFIG_ARM64_SVE static int preserve_sve_context(struct sve_context __user *ctx) @@ -267,39 +271,49 @@ static int preserve_sve_context(struct sve_context __user *ctx) static int restore_sve_fpsimd_context(struct user_ctxs *user) { - int err; + int err = 0; unsigned int vl, vq; struct user_fpsimd_state fpsimd; - struct sve_context sve; + u16 user_vl, flags; - if (__copy_from_user(&sve, user->sve, sizeof(sve))) - return -EFAULT; + if (user->sve_size < sizeof(*user->sve)) + return -EINVAL; + + __get_user_error(user_vl, &(user->sve->vl), err); + __get_user_error(flags, &(user->sve->flags), err); + if (err) + return err; - if (sve.flags & SVE_SIG_FLAG_SM) { + if (flags & SVE_SIG_FLAG_SM) { if (!system_supports_sme()) return -EINVAL; vl = task_get_sme_vl(current); } else { - if (!system_supports_sve()) + /* + * A SME only system use SVE for streaming mode so can + * have a SVE formatted context with a zero VL and no + * payload data. + */ + if (!system_supports_sve() && !system_supports_sme()) return -EINVAL; vl = task_get_sve_vl(current); } - if (sve.vl != vl) + if (user_vl != vl) return -EINVAL; - if (sve.head.size <= sizeof(*user->sve)) { + if (user->sve_size == sizeof(*user->sve)) { clear_thread_flag(TIF_SVE); current->thread.svcr &= ~SVCR_SM_MASK; current->thread.fp_type = FP_STATE_FPSIMD; goto fpsimd_only; } - vq = sve_vq_from_vl(sve.vl); + vq = sve_vq_from_vl(vl); - if (sve.head.size < SVE_SIG_CONTEXT_SIZE(vq)) + if (user->sve_size < SVE_SIG_CONTEXT_SIZE(vq)) return -EINVAL; /* @@ -325,7 +339,7 @@ static int restore_sve_fpsimd_context(struct user_ctxs *user) if (err) return -EFAULT; - if (sve.flags & SVE_SIG_FLAG_SM) + if (flags & SVE_SIG_FLAG_SM) current->thread.svcr |= SVCR_SM_MASK; else set_thread_flag(TIF_SVE); @@ -361,6 +375,34 @@ extern int preserve_sve_context(void __user *ctx); #ifdef CONFIG_ARM64_SME +static int preserve_tpidr2_context(struct tpidr2_context __user *ctx) +{ + int err = 0; + + current->thread.tpidr2_el0 = read_sysreg_s(SYS_TPIDR2_EL0); + + __put_user_error(TPIDR2_MAGIC, &ctx->head.magic, err); + __put_user_error(sizeof(*ctx), &ctx->head.size, err); + __put_user_error(current->thread.tpidr2_el0, &ctx->tpidr2, err); + + return err; +} + +static int restore_tpidr2_context(struct user_ctxs *user) +{ + u64 tpidr2_el0; + int err = 0; + + if (user->tpidr2_size != sizeof(*user->tpidr2)) + return -EINVAL; + + __get_user_error(tpidr2_el0, &user->tpidr2->tpidr2, err); + if (!err) + current->thread.tpidr2_el0 = tpidr2_el0; + + return err; +} + static int preserve_za_context(struct za_context __user *ctx) { int err = 0; @@ -389,7 +431,7 @@ static int preserve_za_context(struct za_context __user *ctx) * fpsimd_signal_preserve_current_state(). */ err |= __copy_to_user((char __user *)ctx + ZA_SIG_REGS_OFFSET, - current->thread.za_state, + current->thread.sme_state, ZA_SIG_REGS_SIZE(vq)); } @@ -398,29 +440,33 @@ static int preserve_za_context(struct za_context __user *ctx) static int restore_za_context(struct user_ctxs *user) { - int err; + int err = 0; unsigned int vq; - struct za_context za; + u16 user_vl; - if (__copy_from_user(&za, user->za, sizeof(za))) - return -EFAULT; + if (user->za_size < sizeof(*user->za)) + return -EINVAL; + + __get_user_error(user_vl, &(user->za->vl), err); + if (err) + return err; - if (za.vl != task_get_sme_vl(current)) + if (user_vl != task_get_sme_vl(current)) return -EINVAL; - if (za.head.size <= sizeof(*user->za)) { + if (user->za_size == sizeof(*user->za)) { current->thread.svcr &= ~SVCR_ZA_MASK; return 0; } - vq = sve_vq_from_vl(za.vl); + vq = sve_vq_from_vl(user_vl); - if (za.head.size < ZA_SIG_CONTEXT_SIZE(vq)) + if (user->za_size < ZA_SIG_CONTEXT_SIZE(vq)) return -EINVAL; /* * Careful: we are about __copy_from_user() directly into - * thread.za_state with preemption enabled, so protection is + * thread.sme_state with preemption enabled, so protection is * needed to prevent a racing context switch from writing stale * registers back over the new data. */ @@ -429,13 +475,13 @@ static int restore_za_context(struct user_ctxs *user) /* From now, fpsimd_thread_switch() won't touch thread.sve_state */ sme_alloc(current); - if (!current->thread.za_state) { + if (!current->thread.sme_state) { current->thread.svcr &= ~SVCR_ZA_MASK; clear_thread_flag(TIF_SME); return -ENOMEM; } - err = __copy_from_user(current->thread.za_state, + err = __copy_from_user(current->thread.sme_state, (char __user const *)user->za + ZA_SIG_REGS_OFFSET, ZA_SIG_REGS_SIZE(vq)); @@ -447,11 +493,83 @@ static int restore_za_context(struct user_ctxs *user) return 0; } + +static int preserve_zt_context(struct zt_context __user *ctx) +{ + int err = 0; + u16 reserved[ARRAY_SIZE(ctx->__reserved)]; + + if (WARN_ON(!thread_za_enabled(¤t->thread))) + return -EINVAL; + + memset(reserved, 0, sizeof(reserved)); + + __put_user_error(ZT_MAGIC, &ctx->head.magic, err); + __put_user_error(round_up(ZT_SIG_CONTEXT_SIZE(1), 16), + &ctx->head.size, err); + __put_user_error(1, &ctx->nregs, err); + BUILD_BUG_ON(sizeof(ctx->__reserved) != sizeof(reserved)); + err |= __copy_to_user(&ctx->__reserved, reserved, sizeof(reserved)); + + /* + * This assumes that the ZT state has already been saved to + * the task struct by calling the function + * fpsimd_signal_preserve_current_state(). + */ + err |= __copy_to_user((char __user *)ctx + ZT_SIG_REGS_OFFSET, + thread_zt_state(¤t->thread), + ZT_SIG_REGS_SIZE(1)); + + return err ? -EFAULT : 0; +} + +static int restore_zt_context(struct user_ctxs *user) +{ + int err; + u16 nregs; + + /* ZA must be restored first for this check to be valid */ + if (!thread_za_enabled(¤t->thread)) + return -EINVAL; + + if (user->zt_size != ZT_SIG_CONTEXT_SIZE(1)) + return -EINVAL; + + if (__copy_from_user(&nregs, &(user->zt->nregs), sizeof(nregs))) + return -EFAULT; + + if (nregs != 1) + return -EINVAL; + + /* + * Careful: we are about __copy_from_user() directly into + * thread.zt_state with preemption enabled, so protection is + * needed to prevent a racing context switch from writing stale + * registers back over the new data. + */ + + fpsimd_flush_task_state(current); + /* From now, fpsimd_thread_switch() won't touch ZT in thread state */ + + err = __copy_from_user(thread_zt_state(¤t->thread), + (char __user const *)user->zt + + ZT_SIG_REGS_OFFSET, + ZT_SIG_REGS_SIZE(1)); + if (err) + return -EFAULT; + + return 0; +} + #else /* ! CONFIG_ARM64_SME */ /* Turn any non-optimised out attempts to use these into a link error: */ +extern int preserve_tpidr2_context(void __user *ctx); +extern int restore_tpidr2_context(struct user_ctxs *user); extern int preserve_za_context(void __user *ctx); extern int restore_za_context(struct user_ctxs *user); +extern int preserve_zt_context(void __user *ctx); +extern int restore_zt_context(struct user_ctxs *user); #endif /* ! CONFIG_ARM64_SME */ @@ -468,7 +586,9 @@ static int parse_user_sigframe(struct user_ctxs *user, user->fpsimd = NULL; user->sve = NULL; + user->tpidr2 = NULL; user->za = NULL; + user->zt = NULL; if (!IS_ALIGNED((unsigned long)base, 16)) goto invalid; @@ -511,10 +631,8 @@ static int parse_user_sigframe(struct user_ctxs *user, if (user->fpsimd) goto invalid; - if (size < sizeof(*user->fpsimd)) - goto invalid; - user->fpsimd = (struct fpsimd_context __user *)head; + user->fpsimd_size = size; break; case ESR_MAGIC: @@ -528,10 +646,19 @@ static int parse_user_sigframe(struct user_ctxs *user, if (user->sve) goto invalid; - if (size < sizeof(*user->sve)) + user->sve = (struct sve_context __user *)head; + user->sve_size = size; + break; + + case TPIDR2_MAGIC: + if (!system_supports_sme()) goto invalid; - user->sve = (struct sve_context __user *)head; + if (user->tpidr2) + goto invalid; + + user->tpidr2 = (struct tpidr2_context __user *)head; + user->tpidr2_size = size; break; case ZA_MAGIC: @@ -541,10 +668,19 @@ static int parse_user_sigframe(struct user_ctxs *user, if (user->za) goto invalid; - if (size < sizeof(*user->za)) + user->za = (struct za_context __user *)head; + user->za_size = size; + break; + + case ZT_MAGIC: + if (!system_supports_sme2()) goto invalid; - user->za = (struct za_context __user *)head; + if (user->zt) + goto invalid; + + user->zt = (struct zt_context __user *)head; + user->zt_size = size; break; case EXTRA_MAGIC: @@ -663,12 +799,18 @@ static int restore_sigframe(struct pt_regs *regs, if (user.sve) err = restore_sve_fpsimd_context(&user); else - err = restore_fpsimd_context(user.fpsimd); + err = restore_fpsimd_context(&user); } + if (err == 0 && system_supports_sme() && user.tpidr2) + err = restore_tpidr2_context(&user); + if (err == 0 && system_supports_sme() && user.za) err = restore_za_context(&user); + if (err == 0 && system_supports_sme2() && user.zt) + err = restore_zt_context(&user); + return err; } @@ -732,7 +874,7 @@ static int setup_sigframe_layout(struct rt_sigframe_user_layout *user, return err; } - if (system_supports_sve()) { + if (system_supports_sve() || system_supports_sme()) { unsigned int vq = 0; if (add_all || test_thread_flag(TIF_SVE) || @@ -760,6 +902,11 @@ static int setup_sigframe_layout(struct rt_sigframe_user_layout *user, else vl = task_get_sme_vl(current); + err = sigframe_alloc(user, &user->tpidr2_offset, + sizeof(struct tpidr2_context)); + if (err) + return err; + if (thread_za_enabled(¤t->thread)) vq = sve_vq_from_vl(vl); @@ -769,6 +916,15 @@ static int setup_sigframe_layout(struct rt_sigframe_user_layout *user, return err; } + if (system_supports_sme2()) { + if (add_all || thread_za_enabled(¤t->thread)) { + err = sigframe_alloc(user, &user->zt_offset, + ZT_SIG_CONTEXT_SIZE(1)); + if (err) + return err; + } + } + return sigframe_alloc_end(user); } @@ -817,6 +973,13 @@ static int setup_sigframe(struct rt_sigframe_user_layout *user, err |= preserve_sve_context(sve_ctx); } + /* TPIDR2 if supported */ + if (system_supports_sme() && err == 0) { + struct tpidr2_context __user *tpidr2_ctx = + apply_user_offset(user, user->tpidr2_offset); + err |= preserve_tpidr2_context(tpidr2_ctx); + } + /* ZA state if present */ if (system_supports_sme() && err == 0 && user->za_offset) { struct za_context __user *za_ctx = @@ -824,6 +987,13 @@ static int setup_sigframe(struct rt_sigframe_user_layout *user, err |= preserve_za_context(za_ctx); } + /* ZT state if present */ + if (system_supports_sme2() && err == 0 && user->zt_offset) { + struct zt_context __user *zt_ctx = + apply_user_offset(user, user->zt_offset); + err |= preserve_zt_context(zt_ctx); + } + if (err == 0 && user->extra_offset) { char __user *sfp = (char __user *)user->sigframe; char __user *userp = diff --git a/arch/arm64/kernel/sleep.S b/arch/arm64/kernel/sleep.S index 97c9de57725d..2ae7cff1953a 100644 --- a/arch/arm64/kernel/sleep.S +++ b/arch/arm64/kernel/sleep.S @@ -99,8 +99,9 @@ SYM_FUNC_END(__cpu_suspend_enter) .pushsection ".idmap.text", "awx" SYM_CODE_START(cpu_resume) + mov x0, xzr bl init_kernel_el - bl finalise_el2 + mov x19, x0 // preserve boot mode #if VA_BITS > 48 ldr_l x0, vabits_actual #endif @@ -116,6 +117,9 @@ SYM_CODE_END(cpu_resume) .popsection SYM_FUNC_START(_cpu_resume) + mov x0, x19 + bl finalise_el2 + mrs x1, mpidr_el1 adr_l x8, mpidr_hash // x8 = struct mpidr_hash virt address diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c index ffc5d76cf695..4e8327264255 100644 --- a/arch/arm64/kernel/smp.c +++ b/arch/arm64/kernel/smp.c @@ -865,7 +865,7 @@ static void do_handle_IPI(int ipinr) unsigned int cpu = smp_processor_id(); if ((unsigned)ipinr < NR_IPI) - trace_ipi_entry_rcuidle(ipi_types[ipinr]); + trace_ipi_entry(ipi_types[ipinr]); switch (ipinr) { case IPI_RESCHEDULE: @@ -914,7 +914,7 @@ static void do_handle_IPI(int ipinr) } if ((unsigned)ipinr < NR_IPI) - trace_ipi_exit_rcuidle(ipi_types[ipinr]); + trace_ipi_exit(ipi_types[ipinr]); } static irqreturn_t ipi_handler(int irq, void *data) diff --git a/arch/arm64/kernel/stacktrace.c b/arch/arm64/kernel/stacktrace.c index 117e2c180f3c..83154303e682 100644 --- a/arch/arm64/kernel/stacktrace.c +++ b/arch/arm64/kernel/stacktrace.c @@ -5,6 +5,7 @@ * Copyright (C) 2012 ARM Ltd. */ #include <linux/kernel.h> +#include <linux/efi.h> #include <linux/export.h> #include <linux/ftrace.h> #include <linux/sched.h> @@ -12,6 +13,7 @@ #include <linux/sched/task_stack.h> #include <linux/stacktrace.h> +#include <asm/efi.h> #include <asm/irq.h> #include <asm/stack_pointer.h> #include <asm/stacktrace.h> @@ -186,6 +188,13 @@ void show_stack(struct task_struct *tsk, unsigned long *sp, const char *loglvl) : stackinfo_get_unknown(); \ }) +#define STACKINFO_EFI \ + ({ \ + ((task == current) && current_in_efi()) \ + ? stackinfo_get_efi() \ + : stackinfo_get_unknown(); \ + }) + noinline noinstr void arch_stack_walk(stack_trace_consume_fn consume_entry, void *cookie, struct task_struct *task, struct pt_regs *regs) @@ -200,6 +209,9 @@ noinline noinstr void arch_stack_walk(stack_trace_consume_fn consume_entry, STACKINFO_SDEI(normal), STACKINFO_SDEI(critical), #endif +#ifdef CONFIG_EFI + STACKINFO_EFI, +#endif }; struct unwind_state state = { .stacks = stacks, diff --git a/arch/arm64/kernel/suspend.c b/arch/arm64/kernel/suspend.c index e7163f31f716..0fbdf5fe64d8 100644 --- a/arch/arm64/kernel/suspend.c +++ b/arch/arm64/kernel/suspend.c @@ -4,6 +4,7 @@ #include <linux/slab.h> #include <linux/uaccess.h> #include <linux/pgtable.h> +#include <linux/cpuidle.h> #include <asm/alternative.h> #include <asm/cacheflush.h> #include <asm/cpufeature.h> @@ -104,6 +105,10 @@ int cpu_suspend(unsigned long arg, int (*fn)(unsigned long)) * From this point debug exceptions are disabled to prevent * updates to mdscr register (saved and restored along with * general purpose registers) from kernel debuggers. + * + * Strictly speaking the trace_hardirqs_off() here is superfluous, + * hardirqs should be firmly off by now. This really ought to use + * something like raw_local_daif_save(). */ flags = local_daif_save(); @@ -120,6 +125,8 @@ int cpu_suspend(unsigned long arg, int (*fn)(unsigned long)) */ arm_cpuidle_save_irq_context(&context); + ct_cpuidle_enter(); + if (__cpu_suspend_enter(&state)) { /* Call the suspend finisher */ ret = fn(arg); @@ -133,8 +140,11 @@ int cpu_suspend(unsigned long arg, int (*fn)(unsigned long)) */ if (!ret) ret = -EOPNOTSUPP; + + ct_cpuidle_exit(); } else { - RCU_NONIDLE(__cpu_suspend_exit()); + ct_cpuidle_exit(); + __cpu_suspend_exit(); } arm_cpuidle_restore_irq_context(&context); diff --git a/arch/arm64/kernel/syscall.c b/arch/arm64/kernel/syscall.c index a5de47e3df2b..da84cf855c44 100644 --- a/arch/arm64/kernel/syscall.c +++ b/arch/arm64/kernel/syscall.c @@ -173,12 +173,8 @@ static inline void fp_user_discard(void) * register state to track, if this changes the KVM code will * need updating. */ - if (system_supports_sme() && test_thread_flag(TIF_SME)) { - u64 svcr = read_sysreg_s(SYS_SVCR); - - if (svcr & SVCR_SM_MASK) - sme_smstop_sm(); - } + if (system_supports_sme()) + sme_smstop_sm(); if (!system_supports_sve()) return; diff --git a/arch/arm64/kernel/traps.c b/arch/arm64/kernel/traps.c index 4c0caa589e12..a6dd3e90755c 100644 --- a/arch/arm64/kernel/traps.c +++ b/arch/arm64/kernel/traps.c @@ -26,6 +26,7 @@ #include <linux/syscalls.h> #include <linux/mm_types.h> #include <linux/kasan.h> +#include <linux/ubsan.h> #include <linux/cfi.h> #include <asm/atomic.h> @@ -162,10 +163,8 @@ static void dump_kernel_instr(const char *lvl, struct pt_regs *regs) if (!bad) p += sprintf(p, i == 0 ? "(%08x) " : "%08x ", val); - else { - p += sprintf(p, "bad PC value"); - break; - } + else + p += sprintf(p, i == 0 ? "(????????) " : "???????? "); } printk("%sCode: %s\n", lvl, str); @@ -1074,6 +1073,19 @@ static struct break_hook kasan_break_hook = { }; #endif +#ifdef CONFIG_UBSAN_TRAP +static int ubsan_handler(struct pt_regs *regs, unsigned long esr) +{ + die(report_ubsan_failure(regs, esr & UBSAN_BRK_MASK), regs, esr); + return DBG_HOOK_HANDLED; +} + +static struct break_hook ubsan_break_hook = { + .fn = ubsan_handler, + .imm = UBSAN_BRK_IMM, + .mask = UBSAN_BRK_MASK, +}; +#endif #define esr_comment(esr) ((esr) & ESR_ELx_BRK64_ISS_COMMENT_MASK) @@ -1092,6 +1104,10 @@ int __init early_brk64(unsigned long addr, unsigned long esr, if ((esr_comment(esr) & ~KASAN_BRK_MASK) == KASAN_BRK_IMM) return kasan_handler(regs, esr) != DBG_HOOK_HANDLED; #endif +#ifdef CONFIG_UBSAN_TRAP + if ((esr_comment(esr) & ~UBSAN_BRK_MASK) == UBSAN_BRK_IMM) + return ubsan_handler(regs, esr) != DBG_HOOK_HANDLED; +#endif return bug_handler(regs, esr) != DBG_HOOK_HANDLED; } @@ -1105,5 +1121,8 @@ void __init trap_init(void) #ifdef CONFIG_KASAN_SW_TAGS register_kernel_break_hook(&kasan_break_hook); #endif +#ifdef CONFIG_UBSAN_TRAP + register_kernel_break_hook(&ubsan_break_hook); +#endif debug_traps_init(); } diff --git a/arch/arm64/kernel/vmlinux.lds.S b/arch/arm64/kernel/vmlinux.lds.S index 4c13dafc98b8..b9202c2ee18e 100644 --- a/arch/arm64/kernel/vmlinux.lds.S +++ b/arch/arm64/kernel/vmlinux.lds.S @@ -93,6 +93,7 @@ jiffies = jiffies_64; #ifdef CONFIG_HIBERNATION #define HIBERNATE_TEXT \ + ALIGN_FUNCTION(); \ __hibernate_exit_text_start = .; \ *(.hibernate_exit.text) \ __hibernate_exit_text_end = .; @@ -102,6 +103,7 @@ jiffies = jiffies_64; #ifdef CONFIG_KEXEC_CORE #define KEXEC_TEXT \ + ALIGN_FUNCTION(); \ __relocate_new_kernel_start = .; \ *(.kexec_relocate.text) \ __relocate_new_kernel_end = .; @@ -175,11 +177,9 @@ SECTIONS ENTRY_TEXT TEXT_TEXT SCHED_TEXT - CPUIDLE_TEXT LOCK_TEXT KPROBES_TEXT HYPERVISOR_TEXT - IDMAP_TEXT *(.gnu.warning) . = ALIGN(16); *(.got) /* Global offset table */ @@ -206,6 +206,7 @@ SECTIONS TRAMP_TEXT HIBERNATE_TEXT KEXEC_TEXT + IDMAP_TEXT . = ALIGN(PAGE_SIZE); } @@ -355,6 +356,8 @@ ASSERT(__idmap_text_end - (__idmap_text_start & ~(SZ_4K - 1)) <= SZ_4K, #ifdef CONFIG_HIBERNATION ASSERT(__hibernate_exit_text_end - __hibernate_exit_text_start <= SZ_4K, "Hibernate exit text is bigger than 4 KiB") +ASSERT(__hibernate_exit_text_start == swsusp_arch_suspend_exit, + "Hibernate exit text does not start with swsusp_arch_suspend_exit") #endif #ifdef CONFIG_UNMAP_KERNEL_AT_EL0 ASSERT((__entry_tramp_text_end - __entry_tramp_text_start) <= 3*PAGE_SIZE, @@ -381,4 +384,6 @@ ASSERT(swapper_pg_dir - tramp_pg_dir == TRAMP_SWAPPER_OFFSET, ASSERT(__relocate_new_kernel_end - __relocate_new_kernel_start <= SZ_4K, "kexec relocation code is bigger than 4 KiB") ASSERT(KEXEC_CONTROL_PAGE_SIZE >= SZ_4K, "KEXEC_CONTROL_PAGE_SIZE is broken") +ASSERT(__relocate_new_kernel_start == arm64_relocate_new_kernel, + "kexec control page does not start with arm64_relocate_new_kernel") #endif diff --git a/arch/arm64/kvm/debug.c b/arch/arm64/kvm/debug.c index fccf9ec01813..55f80fb93925 100644 --- a/arch/arm64/kvm/debug.c +++ b/arch/arm64/kvm/debug.c @@ -328,7 +328,7 @@ void kvm_arch_vcpu_load_debug_state_flags(struct kvm_vcpu *vcpu) * we may need to check if the host state needs to be saved. */ if (cpuid_feature_extract_unsigned_field(dfr0, ID_AA64DFR0_EL1_PMSVer_SHIFT) && - !(read_sysreg_s(SYS_PMBIDR_EL1) & BIT(SYS_PMBIDR_EL1_P_SHIFT))) + !(read_sysreg_s(SYS_PMBIDR_EL1) & BIT(PMBIDR_EL1_P_SHIFT))) vcpu_set_flag(vcpu, DEBUG_STATE_SAVE_SPE); /* Check if we have TRBE implemented and available at the host */ diff --git a/arch/arm64/kvm/fpsimd.c b/arch/arm64/kvm/fpsimd.c index 02dd7e9ebd39..235775d0c825 100644 --- a/arch/arm64/kvm/fpsimd.c +++ b/arch/arm64/kvm/fpsimd.c @@ -143,7 +143,7 @@ void kvm_arch_vcpu_ctxsync_fp(struct kvm_vcpu *vcpu) fp_state.st = &vcpu->arch.ctxt.fp_regs; fp_state.sve_state = vcpu->arch.sve_state; fp_state.sve_vl = vcpu->arch.sve_max_vl; - fp_state.za_state = NULL; + fp_state.sme_state = NULL; fp_state.svcr = &vcpu->arch.svcr; fp_state.fp_type = &vcpu->arch.fp_type; diff --git a/arch/arm64/kvm/guest.c b/arch/arm64/kvm/guest.c index 5626ddb540ce..cf4c495a4321 100644 --- a/arch/arm64/kvm/guest.c +++ b/arch/arm64/kvm/guest.c @@ -1079,7 +1079,7 @@ long kvm_vm_ioctl_mte_copy_tags(struct kvm *kvm, /* uaccess failed, don't leave stale tags */ if (num_tags != MTE_GRANULES_PER_PAGE) - mte_clear_page_tags(page); + mte_clear_page_tags(maddr); set_page_mte_tagged(page); kvm_release_pfn_dirty(pfn); diff --git a/arch/arm64/kvm/hyp/entry.S b/arch/arm64/kvm/hyp/entry.S index 435346ea1504..f3aa7738b477 100644 --- a/arch/arm64/kvm/hyp/entry.S +++ b/arch/arm64/kvm/hyp/entry.S @@ -171,7 +171,7 @@ alternative_else dsb sy // Synchronize against in-flight ld/st isb // Prevent an early read of side-effect free ISR mrs x2, isr_el1 - tbnz x2, #8, 2f // ISR_EL1.A + tbnz x2, #ISR_EL1_A_SHIFT, 2f ret nop 2: diff --git a/arch/arm64/kvm/hyp/include/hyp/fault.h b/arch/arm64/kvm/hyp/include/hyp/fault.h index 1b8a2dcd712f..9ddcfe2c3e57 100644 --- a/arch/arm64/kvm/hyp/include/hyp/fault.h +++ b/arch/arm64/kvm/hyp/include/hyp/fault.h @@ -60,7 +60,7 @@ static inline bool __get_fault_info(u64 esr, struct kvm_vcpu_fault_info *fault) */ if (!(esr & ESR_ELx_S1PTW) && (cpus_have_final_cap(ARM64_WORKAROUND_834220) || - (esr & ESR_ELx_FSC_TYPE) == FSC_PERM)) { + (esr & ESR_ELx_FSC_TYPE) == ESR_ELx_FSC_PERM)) { if (!__translate_far_to_hpfar(far, &hpfar)) return false; } else { diff --git a/arch/arm64/kvm/hyp/include/hyp/switch.h b/arch/arm64/kvm/hyp/include/hyp/switch.h index 3330d1b76bdd..07d37ff88a3f 100644 --- a/arch/arm64/kvm/hyp/include/hyp/switch.h +++ b/arch/arm64/kvm/hyp/include/hyp/switch.h @@ -367,7 +367,7 @@ static bool kvm_hyp_handle_dabt_low(struct kvm_vcpu *vcpu, u64 *exit_code) if (static_branch_unlikely(&vgic_v2_cpuif_trap)) { bool valid; - valid = kvm_vcpu_trap_get_fault_type(vcpu) == FSC_FAULT && + valid = kvm_vcpu_trap_get_fault_type(vcpu) == ESR_ELx_FSC_FAULT && kvm_vcpu_dabt_isvalid(vcpu) && !kvm_vcpu_abt_issea(vcpu) && !kvm_vcpu_abt_iss1tw(vcpu); diff --git a/arch/arm64/kvm/hyp/nvhe/debug-sr.c b/arch/arm64/kvm/hyp/nvhe/debug-sr.c index e17455773b98..2673bde62fad 100644 --- a/arch/arm64/kvm/hyp/nvhe/debug-sr.c +++ b/arch/arm64/kvm/hyp/nvhe/debug-sr.c @@ -27,7 +27,7 @@ static void __debug_save_spe(u64 *pmscr_el1) * Check if the host is actually using it ? */ reg = read_sysreg_s(SYS_PMBLIMITR_EL1); - if (!(reg & BIT(SYS_PMBLIMITR_EL1_E_SHIFT))) + if (!(reg & BIT(PMBLIMITR_EL1_E_SHIFT))) return; /* Yes; save the control register and disable data generation */ diff --git a/arch/arm64/kvm/mmu.c b/arch/arm64/kvm/mmu.c index 31d7fa4c7c14..a3ee3b605c9b 100644 --- a/arch/arm64/kvm/mmu.c +++ b/arch/arm64/kvm/mmu.c @@ -1212,7 +1212,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, exec_fault = kvm_vcpu_trap_is_exec_fault(vcpu); VM_BUG_ON(write_fault && exec_fault); - if (fault_status == FSC_PERM && !write_fault && !exec_fault) { + if (fault_status == ESR_ELx_FSC_PERM && !write_fault && !exec_fault) { kvm_err("Unexpected L2 read permission error\n"); return -EFAULT; } @@ -1277,7 +1277,8 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, * only exception to this is when dirty logging is enabled at runtime * and a write fault needs to collapse a block entry into a table. */ - if (fault_status != FSC_PERM || (logging_active && write_fault)) { + if (fault_status != ESR_ELx_FSC_PERM || + (logging_active && write_fault)) { ret = kvm_mmu_topup_memory_cache(memcache, kvm_mmu_cache_min_pages(kvm)); if (ret) @@ -1342,7 +1343,8 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, * backed by a THP and thus use block mapping if possible. */ if (vma_pagesize == PAGE_SIZE && !(force_pte || device)) { - if (fault_status == FSC_PERM && fault_granule > PAGE_SIZE) + if (fault_status == ESR_ELx_FSC_PERM && + fault_granule > PAGE_SIZE) vma_pagesize = fault_granule; else vma_pagesize = transparent_hugepage_adjust(kvm, memslot, @@ -1350,7 +1352,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, &fault_ipa); } - if (fault_status != FSC_PERM && !device && kvm_has_mte(kvm)) { + if (fault_status != ESR_ELx_FSC_PERM && !device && kvm_has_mte(kvm)) { /* Check the VMM hasn't introduced a new disallowed VMA */ if (kvm_vma_mte_allowed(vma)) { sanitise_mte_tags(kvm, pfn, vma_pagesize); @@ -1376,7 +1378,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, * permissions only if vma_pagesize equals fault_granule. Otherwise, * kvm_pgtable_stage2_map() should be called to change block size. */ - if (fault_status == FSC_PERM && vma_pagesize == fault_granule) + if (fault_status == ESR_ELx_FSC_PERM && vma_pagesize == fault_granule) ret = kvm_pgtable_stage2_relax_perms(pgt, fault_ipa, prot); else ret = kvm_pgtable_stage2_map(pgt, fault_ipa, vma_pagesize, @@ -1441,7 +1443,7 @@ int kvm_handle_guest_abort(struct kvm_vcpu *vcpu) fault_ipa = kvm_vcpu_get_fault_ipa(vcpu); is_iabt = kvm_vcpu_trap_is_iabt(vcpu); - if (fault_status == FSC_FAULT) { + if (fault_status == ESR_ELx_FSC_FAULT) { /* Beyond sanitised PARange (which is the IPA limit) */ if (fault_ipa >= BIT_ULL(get_kvm_ipa_limit())) { kvm_inject_size_fault(vcpu); @@ -1476,8 +1478,9 @@ int kvm_handle_guest_abort(struct kvm_vcpu *vcpu) kvm_vcpu_get_hfar(vcpu), fault_ipa); /* Check the stage-2 fault is trans. fault or write fault */ - if (fault_status != FSC_FAULT && fault_status != FSC_PERM && - fault_status != FSC_ACCESS) { + if (fault_status != ESR_ELx_FSC_FAULT && + fault_status != ESR_ELx_FSC_PERM && + fault_status != ESR_ELx_FSC_ACCESS) { kvm_err("Unsupported FSC: EC=%#x xFSC=%#lx ESR_EL2=%#lx\n", kvm_vcpu_trap_get_class(vcpu), (unsigned long)kvm_vcpu_trap_get_fault(vcpu), @@ -1539,7 +1542,7 @@ int kvm_handle_guest_abort(struct kvm_vcpu *vcpu) /* Userspace should not be able to register out-of-bounds IPAs */ VM_BUG_ON(fault_ipa >= kvm_phys_size(vcpu->kvm)); - if (fault_status == FSC_ACCESS) { + if (fault_status == ESR_ELx_FSC_ACCESS) { handle_access_fault(vcpu, fault_ipa); ret = 1; goto out_unlock; diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c index d5ee52d6bf73..c6cbfe6b854b 100644 --- a/arch/arm64/kvm/sys_regs.c +++ b/arch/arm64/kvm/sys_regs.c @@ -646,7 +646,7 @@ static void reset_pmcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r) return; /* Only preserve PMCR_EL0.N, and reset the rest to 0 */ - pmcr = read_sysreg(pmcr_el0) & ARMV8_PMU_PMCR_N_MASK; + pmcr = read_sysreg(pmcr_el0) & (ARMV8_PMU_PMCR_N_MASK << ARMV8_PMU_PMCR_N_SHIFT); if (!kvm_supports_32bit_el0()) pmcr |= ARMV8_PMU_PMCR_LC; diff --git a/arch/arm64/kvm/vgic/vgic-its.c b/arch/arm64/kvm/vgic/vgic-its.c index 94a666dd1443..2642e9ce2819 100644 --- a/arch/arm64/kvm/vgic/vgic-its.c +++ b/arch/arm64/kvm/vgic/vgic-its.c @@ -2187,7 +2187,7 @@ static int vgic_its_save_ite(struct vgic_its *its, struct its_device *dev, ((u64)ite->irq->intid << KVM_ITS_ITE_PINTID_SHIFT) | ite->collection->collection_id; val = cpu_to_le64(val); - return kvm_write_guest_lock(kvm, gpa, &val, ite_esz); + return vgic_write_guest_lock(kvm, gpa, &val, ite_esz); } /** @@ -2339,7 +2339,7 @@ static int vgic_its_save_dte(struct vgic_its *its, struct its_device *dev, (itt_addr_field << KVM_ITS_DTE_ITTADDR_SHIFT) | (dev->num_eventid_bits - 1)); val = cpu_to_le64(val); - return kvm_write_guest_lock(kvm, ptr, &val, dte_esz); + return vgic_write_guest_lock(kvm, ptr, &val, dte_esz); } /** @@ -2526,7 +2526,7 @@ static int vgic_its_save_cte(struct vgic_its *its, ((u64)collection->target_addr << KVM_ITS_CTE_RDBASE_SHIFT) | collection->collection_id); val = cpu_to_le64(val); - return kvm_write_guest_lock(its->dev->kvm, gpa, &val, esz); + return vgic_write_guest_lock(its->dev->kvm, gpa, &val, esz); } /* @@ -2607,7 +2607,7 @@ static int vgic_its_save_collection_table(struct vgic_its *its) */ val = 0; BUG_ON(cte_esz > sizeof(val)); - ret = kvm_write_guest_lock(its->dev->kvm, gpa, &val, cte_esz); + ret = vgic_write_guest_lock(its->dev->kvm, gpa, &val, cte_esz); return ret; } @@ -2743,7 +2743,6 @@ static int vgic_its_has_attr(struct kvm_device *dev, static int vgic_its_ctrl(struct kvm *kvm, struct vgic_its *its, u64 attr) { const struct vgic_its_abi *abi = vgic_its_get_abi(its); - struct vgic_dist *dist = &kvm->arch.vgic; int ret = 0; if (attr == KVM_DEV_ARM_VGIC_CTRL_INIT) /* Nothing to do */ @@ -2763,9 +2762,7 @@ static int vgic_its_ctrl(struct kvm *kvm, struct vgic_its *its, u64 attr) vgic_its_reset(kvm, its); break; case KVM_DEV_ARM_ITS_SAVE_TABLES: - dist->save_its_tables_in_progress = true; ret = abi->save_tables(its); - dist->save_its_tables_in_progress = false; break; case KVM_DEV_ARM_ITS_RESTORE_TABLES: ret = abi->restore_tables(its); @@ -2792,7 +2789,7 @@ bool kvm_arch_allow_write_without_running_vcpu(struct kvm *kvm) { struct vgic_dist *dist = &kvm->arch.vgic; - return dist->save_its_tables_in_progress; + return dist->table_write_in_progress; } static int vgic_its_set_attr(struct kvm_device *dev, diff --git a/arch/arm64/kvm/vgic/vgic-v3.c b/arch/arm64/kvm/vgic/vgic-v3.c index 826ff6f2a4e7..684bdfaad4a9 100644 --- a/arch/arm64/kvm/vgic/vgic-v3.c +++ b/arch/arm64/kvm/vgic/vgic-v3.c @@ -339,7 +339,7 @@ retry: if (status) { /* clear consumed data */ val &= ~(1 << bit_nr); - ret = kvm_write_guest_lock(kvm, ptr, &val, 1); + ret = vgic_write_guest_lock(kvm, ptr, &val, 1); if (ret) return ret; } @@ -350,26 +350,23 @@ retry: * The deactivation of the doorbell interrupt will trigger the * unmapping of the associated vPE. */ -static void unmap_all_vpes(struct vgic_dist *dist) +static void unmap_all_vpes(struct kvm *kvm) { - struct irq_desc *desc; + struct vgic_dist *dist = &kvm->arch.vgic; int i; - for (i = 0; i < dist->its_vm.nr_vpes; i++) { - desc = irq_to_desc(dist->its_vm.vpes[i]->irq); - irq_domain_deactivate_irq(irq_desc_get_irq_data(desc)); - } + for (i = 0; i < dist->its_vm.nr_vpes; i++) + free_irq(dist->its_vm.vpes[i]->irq, kvm_get_vcpu(kvm, i)); } -static void map_all_vpes(struct vgic_dist *dist) +static void map_all_vpes(struct kvm *kvm) { - struct irq_desc *desc; + struct vgic_dist *dist = &kvm->arch.vgic; int i; - for (i = 0; i < dist->its_vm.nr_vpes; i++) { - desc = irq_to_desc(dist->its_vm.vpes[i]->irq); - irq_domain_activate_irq(irq_desc_get_irq_data(desc), false); - } + for (i = 0; i < dist->its_vm.nr_vpes; i++) + WARN_ON(vgic_v4_request_vpe_irq(kvm_get_vcpu(kvm, i), + dist->its_vm.vpes[i]->irq)); } /** @@ -394,7 +391,7 @@ int vgic_v3_save_pending_tables(struct kvm *kvm) * and enabling of the doorbells have already been done. */ if (kvm_vgic_global_state.has_gicv4_1) { - unmap_all_vpes(dist); + unmap_all_vpes(kvm); vlpi_avail = true; } @@ -437,14 +434,14 @@ int vgic_v3_save_pending_tables(struct kvm *kvm) else val &= ~(1 << bit_nr); - ret = kvm_write_guest_lock(kvm, ptr, &val, 1); + ret = vgic_write_guest_lock(kvm, ptr, &val, 1); if (ret) goto out; } out: if (vlpi_avail) - map_all_vpes(dist); + map_all_vpes(kvm); return ret; } @@ -616,6 +613,8 @@ static const struct midr_range broken_seis[] = { MIDR_ALL_VERSIONS(MIDR_APPLE_M1_FIRESTORM_PRO), MIDR_ALL_VERSIONS(MIDR_APPLE_M1_ICESTORM_MAX), MIDR_ALL_VERSIONS(MIDR_APPLE_M1_FIRESTORM_MAX), + MIDR_ALL_VERSIONS(MIDR_APPLE_M2_BLIZZARD), + MIDR_ALL_VERSIONS(MIDR_APPLE_M2_AVALANCHE), {}, }; diff --git a/arch/arm64/kvm/vgic/vgic-v4.c b/arch/arm64/kvm/vgic/vgic-v4.c index ad06ba6c9b00..a413718be92b 100644 --- a/arch/arm64/kvm/vgic/vgic-v4.c +++ b/arch/arm64/kvm/vgic/vgic-v4.c @@ -222,6 +222,11 @@ void vgic_v4_get_vlpi_state(struct vgic_irq *irq, bool *val) *val = !!(*ptr & mask); } +int vgic_v4_request_vpe_irq(struct kvm_vcpu *vcpu, int irq) +{ + return request_irq(irq, vgic_v4_doorbell_handler, 0, "vcpu", vcpu); +} + /** * vgic_v4_init - Initialize the GICv4 data structures * @kvm: Pointer to the VM being initialized @@ -283,8 +288,7 @@ int vgic_v4_init(struct kvm *kvm) irq_flags &= ~IRQ_NOAUTOEN; irq_set_status_flags(irq, irq_flags); - ret = request_irq(irq, vgic_v4_doorbell_handler, - 0, "vcpu", vcpu); + ret = vgic_v4_request_vpe_irq(vcpu, irq); if (ret) { kvm_err("failed to allocate vcpu IRQ%d\n", irq); /* diff --git a/arch/arm64/kvm/vgic/vgic.h b/arch/arm64/kvm/vgic/vgic.h index 0c8da72953f0..7f7f3c5ed85a 100644 --- a/arch/arm64/kvm/vgic/vgic.h +++ b/arch/arm64/kvm/vgic/vgic.h @@ -6,6 +6,7 @@ #define __KVM_ARM_VGIC_NEW_H__ #include <linux/irqchip/arm-gic-common.h> +#include <asm/kvm_mmu.h> #define PRODUCT_ID_KVM 0x4b /* ASCII code K */ #define IMPLEMENTER_ARM 0x43b @@ -131,6 +132,19 @@ static inline bool vgic_irq_is_multi_sgi(struct vgic_irq *irq) return vgic_irq_get_lr_count(irq) > 1; } +static inline int vgic_write_guest_lock(struct kvm *kvm, gpa_t gpa, + const void *data, unsigned long len) +{ + struct vgic_dist *dist = &kvm->arch.vgic; + int ret; + + dist->table_write_in_progress = true; + ret = kvm_write_guest_lock(kvm, gpa, data, len); + dist->table_write_in_progress = false; + + return ret; +} + /* * This struct provides an intermediate representation of the fields contained * in the GICH_VMCR and ICH_VMCR registers, such that code exporting the GIC @@ -331,5 +345,6 @@ int vgic_v4_init(struct kvm *kvm); void vgic_v4_teardown(struct kvm *kvm); void vgic_v4_configure_vsgis(struct kvm *kvm); void vgic_v4_get_vlpi_state(struct vgic_irq *irq, bool *val); +int vgic_v4_request_vpe_irq(struct kvm_vcpu *vcpu, int irq); #endif diff --git a/arch/arm64/mm/cache.S b/arch/arm64/mm/cache.S index 081058d4e436..503567c864fd 100644 --- a/arch/arm64/mm/cache.S +++ b/arch/arm64/mm/cache.S @@ -56,6 +56,7 @@ SYM_FUNC_START(caches_clean_inval_pou) caches_clean_inval_pou_macro ret SYM_FUNC_END(caches_clean_inval_pou) +SYM_FUNC_ALIAS(__pi_caches_clean_inval_pou, caches_clean_inval_pou) /* * caches_clean_inval_user_pou(start,end) diff --git a/arch/arm64/mm/hugetlbpage.c b/arch/arm64/mm/hugetlbpage.c index 35e9a468d13e..95364e8bdc19 100644 --- a/arch/arm64/mm/hugetlbpage.c +++ b/arch/arm64/mm/hugetlbpage.c @@ -559,3 +559,24 @@ bool __init arch_hugetlb_valid_size(unsigned long size) { return __hugetlb_valid_size(size); } + +pte_t huge_ptep_modify_prot_start(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep) +{ + if (IS_ENABLED(CONFIG_ARM64_ERRATUM_2645198) && + cpus_have_const_cap(ARM64_WORKAROUND_2645198)) { + /* + * Break-before-make (BBM) is required for all user space mappings + * when the permission changes from executable to non-executable + * in cases where cpu is affected with errata #2645198. + */ + if (pte_user_exec(READ_ONCE(*ptep))) + return huge_ptep_clear_flush(vma, addr, ptep); + } + return huge_ptep_get_and_clear(vma->vm_mm, addr, ptep); +} + +void huge_ptep_modify_prot_commit(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep, + pte_t old_pte, pte_t pte) +{ + set_huge_pte_at(vma->vm_mm, addr, ptep, pte); +} diff --git a/arch/arm64/mm/mmu.c b/arch/arm64/mm/mmu.c index 14c87e8d69d8..6f9d8898a025 100644 --- a/arch/arm64/mm/mmu.c +++ b/arch/arm64/mm/mmu.c @@ -133,7 +133,7 @@ static phys_addr_t __init early_pgtable_alloc(int shift) return phys; } -static bool pgattr_change_is_safe(u64 old, u64 new) +bool pgattr_change_is_safe(u64 old, u64 new) { /* * The following mapping attributes may be updated in live @@ -142,9 +142,13 @@ static bool pgattr_change_is_safe(u64 old, u64 new) pteval_t mask = PTE_PXN | PTE_RDONLY | PTE_WRITE | PTE_NG; /* creating or taking down mappings is always safe */ - if (old == 0 || new == 0) + if (!pte_valid(__pte(old)) || !pte_valid(__pte(new))) return true; + /* A live entry's pfn should not change */ + if (pte_pfn(__pte(old)) != pte_pfn(__pte(new))) + return false; + /* live contiguous mappings may not be manipulated at all */ if ((old | new) & PTE_CONT) return false; @@ -1630,3 +1634,24 @@ static int __init prevent_bootmem_remove_init(void) } early_initcall(prevent_bootmem_remove_init); #endif + +pte_t ptep_modify_prot_start(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep) +{ + if (IS_ENABLED(CONFIG_ARM64_ERRATUM_2645198) && + cpus_have_const_cap(ARM64_WORKAROUND_2645198)) { + /* + * Break-before-make (BBM) is required for all user space mappings + * when the permission changes from executable to non-executable + * in cases where cpu is affected with errata #2645198. + */ + if (pte_user_exec(READ_ONCE(*ptep))) + return ptep_clear_flush(vma, addr, ptep); + } + return ptep_get_and_clear(vma->vm_mm, addr, ptep); +} + +void ptep_modify_prot_commit(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep, + pte_t old_pte, pte_t pte) +{ + set_pte_at(vma->vm_mm, addr, ptep, pte); +} diff --git a/arch/arm64/mm/proc.S b/arch/arm64/mm/proc.S index 066fa60b93d2..91410f488090 100644 --- a/arch/arm64/mm/proc.S +++ b/arch/arm64/mm/proc.S @@ -110,7 +110,6 @@ SYM_FUNC_END(cpu_do_suspend) * * x0: Address of context pointer */ - .pushsection ".idmap.text", "awx" SYM_FUNC_START(cpu_do_resume) ldp x2, x3, [x0] ldp x4, x5, [x0, #16] @@ -166,7 +165,6 @@ alternative_else_nop_endif isb ret SYM_FUNC_END(cpu_do_resume) - .popsection #endif .pushsection ".idmap.text", "awx" diff --git a/arch/arm64/tools/cpucaps b/arch/arm64/tools/cpucaps index a86ee376920a..10dcfa13390a 100644 --- a/arch/arm64/tools/cpucaps +++ b/arch/arm64/tools/cpucaps @@ -28,7 +28,9 @@ HAS_GENERIC_AUTH HAS_GENERIC_AUTH_ARCH_QARMA3 HAS_GENERIC_AUTH_ARCH_QARMA5 HAS_GENERIC_AUTH_IMP_DEF -HAS_IRQ_PRIO_MASKING +HAS_GIC_CPUIF_SYSREGS +HAS_GIC_PRIO_MASKING +HAS_GIC_PRIO_RELAXED_SYNC HAS_LDAPR HAS_LSE_ATOMICS HAS_NO_FPSIMD @@ -38,7 +40,6 @@ HAS_RAS_EXTN HAS_RNG HAS_SB HAS_STAGE2_FWB -HAS_SYSREG_GIC_CPUIF HAS_TIDCP1 HAS_TLB_RANGE HAS_VIRT_HOST_EXTN @@ -50,6 +51,7 @@ MTE MTE_ASYMM SME SME_FA64 +SME2 SPECTRE_V2 SPECTRE_V3A SPECTRE_V4 @@ -71,6 +73,7 @@ WORKAROUND_2038923 WORKAROUND_2064142 WORKAROUND_2077057 WORKAROUND_2457168 +WORKAROUND_2645198 WORKAROUND_2658417 WORKAROUND_TRBE_OVERWRITE_FILL_MODE WORKAROUND_TSB_FLUSH_FAILURE diff --git a/arch/arm64/tools/gen-sysreg.awk b/arch/arm64/tools/gen-sysreg.awk index c350164a3955..7f27d66a17e1 100755 --- a/arch/arm64/tools/gen-sysreg.awk +++ b/arch/arm64/tools/gen-sysreg.awk @@ -44,6 +44,11 @@ function define_field(reg, field, msb, lsb) { define(reg "_" field "_WIDTH", msb - lsb + 1) } +# Print a field _SIGNED definition for a field +function define_field_sign(reg, field, sign) { + define(reg "_" field "_SIGNED", sign) +} + # Parse a "<msb>[:<lsb>]" string into the global variables @msb and @lsb function parse_bitdef(reg, field, bitdef, _bits) { @@ -233,6 +238,30 @@ END { next } +/^SignedEnum/ { + change_block("Enum<", "Sysreg", "Enum") + expect_fields(3) + field = $3 + parse_bitdef(reg, field, $2) + + define_field(reg, field, msb, lsb) + define_field_sign(reg, field, "true") + + next +} + +/^UnsignedEnum/ { + change_block("Enum<", "Sysreg", "Enum") + expect_fields(3) + field = $3 + parse_bitdef(reg, field, $2) + + define_field(reg, field, msb, lsb) + define_field_sign(reg, field, "false") + + next +} + /^Enum/ { change_block("Enum", "Sysreg", "Enum") expect_fields(3) diff --git a/arch/arm64/tools/sysreg b/arch/arm64/tools/sysreg index 184e58fd5631..94d78acafb67 100644 --- a/arch/arm64/tools/sysreg +++ b/arch/arm64/tools/sysreg @@ -48,26 +48,26 @@ Sysreg ID_PFR0_EL1 3 0 0 1 0 Res0 63:32 -Enum 31:28 RAS +UnsignedEnum 31:28 RAS 0b0000 NI 0b0001 RAS 0b0010 RASv1p1 EndEnum -Enum 27:24 DIT +UnsignedEnum 27:24 DIT 0b0000 NI 0b0001 IMP EndEnum -Enum 23:20 AMU +UnsignedEnum 23:20 AMU 0b0000 NI 0b0001 AMUv1 0b0010 AMUv1p1 EndEnum -Enum 19:16 CSV2 +UnsignedEnum 19:16 CSV2 0b0000 UNDISCLOSED 0b0001 IMP 0b0010 CSV2p1 EndEnum -Enum 15:12 State3 +UnsignedEnum 15:12 State3 0b0000 NI 0b0001 IMP EndEnum @@ -76,12 +76,12 @@ Enum 11:8 State2 0b0001 NO_CV 0b0010 CV EndEnum -Enum 7:4 State1 +UnsignedEnum 7:4 State1 0b0000 NI 0b0001 THUMB 0b0010 THUMB2 EndEnum -Enum 3:0 State0 +UnsignedEnum 3:0 State0 0b0000 NI 0b0001 IMP EndEnum @@ -89,12 +89,12 @@ EndSysreg Sysreg ID_PFR1_EL1 3 0 0 1 1 Res0 63:32 -Enum 31:28 GIC +UnsignedEnum 31:28 GIC 0b0000 NI 0b0001 GICv3 0b0010 GICv4p1 EndEnum -Enum 27:24 Virt_frac +UnsignedEnum 27:24 Virt_frac 0b0000 NI 0b0001 IMP EndEnum @@ -103,16 +103,16 @@ Enum 23:20 Sec_frac 0b0001 WALK_DISABLE 0b0010 SECURE_MEMORY EndEnum -Enum 19:16 GenTimer +UnsignedEnum 19:16 GenTimer 0b0000 NI 0b0001 IMP 0b0010 ECV EndEnum -Enum 15:12 Virtualization +UnsignedEnum 15:12 Virtualization 0b0000 NI 0b0001 IMP EndEnum -Enum 11:8 MProgMod +UnsignedEnum 11:8 MProgMod 0b0000 NI 0b0001 IMP EndEnum @@ -121,7 +121,7 @@ Enum 7:4 Security 0b0001 EL3 0b0001 NSACR_RFR EndEnum -Enum 3:0 ProgMod +UnsignedEnum 3:0 ProgMod 0b0000 NI 0b0001 IMP EndEnum @@ -129,11 +129,11 @@ EndSysreg Sysreg ID_DFR0_EL1 3 0 0 1 2 Res0 63:32 -Enum 31:28 TraceFilt +UnsignedEnum 31:28 TraceFilt 0b0000 NI 0b0001 IMP EndEnum -Enum 27:24 PerfMon +UnsignedEnum 27:24 PerfMon 0b0000 NI 0b0001 PMUv1 0b0010 PMUv2 @@ -192,7 +192,7 @@ Enum 31:28 InnerShr 0b0001 HW 0b1111 IGNORED EndEnum -Enum 27:24 FCSE +UnsignedEnum 27:24 FCSE 0b0000 NI 0b0001 IMP EndEnum @@ -369,7 +369,7 @@ Enum 27:24 Divide 0b0001 xDIV_T32 0b0010 xDIV_A32 EndEnum -Enum 23:20 Debug +UnsignedEnum 23:20 Debug 0b0000 NI 0b0001 IMP EndEnum @@ -380,19 +380,19 @@ Enum 19:16 Coproc 0b0011 MRRC 0b0100 MRRC2 EndEnum -Enum 15:12 CmpBranch +UnsignedEnum 15:12 CmpBranch 0b0000 NI 0b0001 IMP EndEnum -Enum 11:8 BitField +UnsignedEnum 11:8 BitField 0b0000 NI 0b0001 IMP EndEnum -Enum 7:4 BitCount +UnsignedEnum 7:4 BitCount 0b0000 NI 0b0001 IMP EndEnum -Enum 3:0 Swap +UnsignedEnum 3:0 Swap 0b0000 NI 0b0001 IMP EndEnum @@ -562,33 +562,33 @@ EndSysreg Sysreg ID_ISAR5_EL1 3 0 0 2 5 Res0 63:32 -Enum 31:28 VCMA +UnsignedEnum 31:28 VCMA 0b0000 NI 0b0001 IMP EndEnum -Enum 27:24 RDM +UnsignedEnum 27:24 RDM 0b0000 NI 0b0001 IMP EndEnum Res0 23:20 -Enum 19:16 CRC32 +UnsignedEnum 19:16 CRC32 0b0000 NI 0b0001 IMP EndEnum -Enum 15:12 SHA2 +UnsignedEnum 15:12 SHA2 0b0000 NI 0b0001 IMP EndEnum -Enum 11:8 SHA1 +UnsignedEnum 11:8 SHA1 0b0000 NI 0b0001 IMP EndEnum -Enum 7:4 AES +UnsignedEnum 7:4 AES 0b0000 NI 0b0001 IMP 0b0010 VMULL EndEnum -Enum 3:0 SEVL +UnsignedEnum 3:0 SEVL 0b0000 NI 0b0001 IMP EndEnum @@ -596,31 +596,31 @@ EndSysreg Sysreg ID_ISAR6_EL1 3 0 0 2 7 Res0 63:28 -Enum 27:24 I8MM +UnsignedEnum 27:24 I8MM 0b0000 NI 0b0001 IMP EndEnum -Enum 23:20 BF16 +UnsignedEnum 23:20 BF16 0b0000 NI 0b0001 IMP EndEnum -Enum 19:16 SPECRES +UnsignedEnum 19:16 SPECRES 0b0000 NI 0b0001 IMP EndEnum -Enum 15:12 SB +UnsignedEnum 15:12 SB 0b0000 NI 0b0001 IMP EndEnum -Enum 11:8 FHM +UnsignedEnum 11:8 FHM 0b0000 NI 0b0001 IMP EndEnum -Enum 7:4 DP +UnsignedEnum 7:4 DP 0b0000 NI 0b0001 IMP EndEnum -Enum 3:0 JSCVT +UnsignedEnum 3:0 JSCVT 0b0000 NI 0b0001 IMP EndEnum @@ -628,37 +628,37 @@ EndSysreg Sysreg ID_MMFR4_EL1 3 0 0 2 6 Res0 63:32 -Enum 31:28 EVT +UnsignedEnum 31:28 EVT 0b0000 NI 0b0001 NO_TLBIS 0b0010 TLBIS EndEnum -Enum 27:24 CCIDX +UnsignedEnum 27:24 CCIDX 0b0000 NI 0b0001 IMP EndEnum -Enum 23:20 LSM +UnsignedEnum 23:20 LSM 0b0000 NI 0b0001 IMP EndEnum -Enum 19:16 HPDS +UnsignedEnum 19:16 HPDS 0b0000 NI 0b0001 AA32HPD 0b0010 HPDS2 EndEnum -Enum 15:12 CnP +UnsignedEnum 15:12 CnP 0b0000 NI 0b0001 IMP EndEnum -Enum 11:8 XNX +UnsignedEnum 11:8 XNX 0b0000 NI 0b0001 IMP EndEnum -Enum 7:4 AC2 +UnsignedEnum 7:4 AC2 0b0000 NI 0b0001 IMP EndEnum -Enum 3:0 SpecSEI +UnsignedEnum 3:0 SpecSEI 0b0000 NI 0b0001 IMP EndEnum @@ -666,77 +666,77 @@ EndSysreg Sysreg MVFR0_EL1 3 0 0 3 0 Res0 63:32 -Enum 31:28 FPRound +UnsignedEnum 31:28 FPRound 0b0000 NI 0b0001 IMP EndEnum -Enum 27:24 FPShVec +UnsignedEnum 27:24 FPShVec 0b0000 NI 0b0001 IMP EndEnum -Enum 23:20 FPSqrt +UnsignedEnum 23:20 FPSqrt 0b0000 NI 0b0001 IMP EndEnum -Enum 19:16 FPDivide +UnsignedEnum 19:16 FPDivide 0b0000 NI 0b0001 IMP EndEnum -Enum 15:12 FPTrap +UnsignedEnum 15:12 FPTrap 0b0000 NI 0b0001 IMP EndEnum -Enum 11:8 FPDP +UnsignedEnum 11:8 FPDP 0b0000 NI 0b0001 VFPv2 - 0b0001 VFPv3 + 0b0010 VFPv3 EndEnum -Enum 7:4 FPSP +UnsignedEnum 7:4 FPSP 0b0000 NI 0b0001 VFPv2 - 0b0001 VFPv3 + 0b0010 VFPv3 EndEnum Enum 3:0 SIMDReg 0b0000 NI 0b0001 IMP_16x64 - 0b0001 IMP_32x64 + 0b0010 IMP_32x64 EndEnum EndSysreg Sysreg MVFR1_EL1 3 0 0 3 1 Res0 63:32 -Enum 31:28 SIMDFMAC +UnsignedEnum 31:28 SIMDFMAC 0b0000 NI 0b0001 IMP EndEnum -Enum 27:24 FPHP +UnsignedEnum 27:24 FPHP 0b0000 NI 0b0001 FPHP 0b0010 FPHP_CONV 0b0011 FP16 EndEnum -Enum 23:20 SIMDHP +UnsignedEnum 23:20 SIMDHP 0b0000 NI 0b0001 SIMDHP - 0b0001 SIMDHP_FLOAT + 0b0010 SIMDHP_FLOAT EndEnum -Enum 19:16 SIMDSP +UnsignedEnum 19:16 SIMDSP 0b0000 NI 0b0001 IMP EndEnum -Enum 15:12 SIMDInt +UnsignedEnum 15:12 SIMDInt 0b0000 NI 0b0001 IMP EndEnum -Enum 11:8 SIMDLS +UnsignedEnum 11:8 SIMDLS 0b0000 NI 0b0001 IMP EndEnum -Enum 7:4 FPDNaN +UnsignedEnum 7:4 FPDNaN 0b0000 NI 0b0001 IMP EndEnum -Enum 3:0 FPFtZ +UnsignedEnum 3:0 FPFtZ 0b0000 NI 0b0001 IMP EndEnum @@ -761,15 +761,15 @@ EndSysreg Sysreg ID_PFR2_EL1 3 0 0 3 4 Res0 63:12 -Enum 11:8 RAS_frac +UnsignedEnum 11:8 RAS_frac 0b0000 NI 0b0001 RASv1p1 EndEnum -Enum 7:4 SSBS +UnsignedEnum 7:4 SSBS 0b0000 NI 0b0001 IMP EndEnum -Enum 3:0 CSV3 +UnsignedEnum 3:0 CSV3 0b0000 NI 0b0001 IMP EndEnum @@ -777,7 +777,7 @@ EndSysreg Sysreg ID_DFR1_EL1 3 0 0 3 5 Res0 63:8 -Enum 7:4 HPMN0 +UnsignedEnum 7:4 HPMN0 0b0000 NI 0b0001 IMP EndEnum @@ -790,87 +790,87 @@ EndSysreg Sysreg ID_MMFR5_EL1 3 0 0 3 6 Res0 63:8 -Enum 7:4 nTLBPA +UnsignedEnum 7:4 nTLBPA 0b0000 NI 0b0001 IMP EndEnum -Enum 3:0 ETS +UnsignedEnum 3:0 ETS 0b0000 NI 0b0001 IMP EndEnum EndSysreg Sysreg ID_AA64PFR0_EL1 3 0 0 4 0 -Enum 63:60 CSV3 +UnsignedEnum 63:60 CSV3 0b0000 NI 0b0001 IMP EndEnum -Enum 59:56 CSV2 +UnsignedEnum 59:56 CSV2 0b0000 NI 0b0001 IMP 0b0010 CSV2_2 0b0011 CSV2_3 EndEnum -Enum 55:52 RME +UnsignedEnum 55:52 RME 0b0000 NI 0b0001 IMP EndEnum -Enum 51:48 DIT +UnsignedEnum 51:48 DIT 0b0000 NI 0b0001 IMP EndEnum -Enum 47:44 AMU +UnsignedEnum 47:44 AMU 0b0000 NI 0b0001 IMP 0b0010 V1P1 EndEnum -Enum 43:40 MPAM +UnsignedEnum 43:40 MPAM 0b0000 0 0b0001 1 EndEnum -Enum 39:36 SEL2 +UnsignedEnum 39:36 SEL2 0b0000 NI 0b0001 IMP EndEnum -Enum 35:32 SVE +UnsignedEnum 35:32 SVE 0b0000 NI 0b0001 IMP EndEnum -Enum 31:28 RAS +UnsignedEnum 31:28 RAS 0b0000 NI 0b0001 IMP 0b0010 V1P1 EndEnum -Enum 27:24 GIC +UnsignedEnum 27:24 GIC 0b0000 NI 0b0001 IMP 0b0010 V4P1 EndEnum -Enum 23:20 AdvSIMD +SignedEnum 23:20 AdvSIMD 0b0000 IMP 0b0001 FP16 0b1111 NI EndEnum -Enum 19:16 FP +SignedEnum 19:16 FP 0b0000 IMP 0b0001 FP16 0b1111 NI EndEnum -Enum 15:12 EL3 +UnsignedEnum 15:12 EL3 0b0000 NI 0b0001 IMP 0b0010 AARCH32 EndEnum -Enum 11:8 EL2 +UnsignedEnum 11:8 EL2 0b0000 NI 0b0001 IMP 0b0010 AARCH32 EndEnum -Enum 7:4 EL1 +UnsignedEnum 7:4 EL1 0b0001 IMP 0b0010 AARCH32 EndEnum -Enum 3:0 EL0 +UnsignedEnum 3:0 EL0 0b0001 IMP 0b0010 AARCH32 EndEnum @@ -878,44 +878,45 @@ EndSysreg Sysreg ID_AA64PFR1_EL1 3 0 0 4 1 Res0 63:40 -Enum 39:36 NMI +UnsignedEnum 39:36 NMI 0b0000 NI 0b0001 IMP EndEnum -Enum 35:32 CSV2_frac +UnsignedEnum 35:32 CSV2_frac 0b0000 NI 0b0001 CSV2_1p1 0b0010 CSV2_1p2 EndEnum -Enum 31:28 RNDR_trap +UnsignedEnum 31:28 RNDR_trap 0b0000 NI 0b0001 IMP EndEnum -Enum 27:24 SME +UnsignedEnum 27:24 SME 0b0000 NI 0b0001 IMP + 0b0010 SME2 EndEnum Res0 23:20 -Enum 19:16 MPAM_frac +UnsignedEnum 19:16 MPAM_frac 0b0000 MINOR_0 0b0001 MINOR_1 EndEnum -Enum 15:12 RAS_frac +UnsignedEnum 15:12 RAS_frac 0b0000 NI 0b0001 RASv1p1 EndEnum -Enum 11:8 MTE +UnsignedEnum 11:8 MTE 0b0000 NI 0b0001 IMP 0b0010 MTE2 0b0011 MTE3 EndEnum -Enum 7:4 SSBS +UnsignedEnum 7:4 SSBS 0b0000 NI 0b0001 IMP 0b0010 SSBS2 EndEnum -Enum 3:0 BT +UnsignedEnum 3:0 BT 0b0000 NI 0b0001 IMP EndEnum @@ -923,45 +924,45 @@ EndSysreg Sysreg ID_AA64ZFR0_EL1 3 0 0 4 4 Res0 63:60 -Enum 59:56 F64MM +UnsignedEnum 59:56 F64MM 0b0000 NI 0b0001 IMP EndEnum -Enum 55:52 F32MM +UnsignedEnum 55:52 F32MM 0b0000 NI 0b0001 IMP EndEnum Res0 51:48 -Enum 47:44 I8MM +UnsignedEnum 47:44 I8MM 0b0000 NI 0b0001 IMP EndEnum -Enum 43:40 SM4 +UnsignedEnum 43:40 SM4 0b0000 NI 0b0001 IMP EndEnum Res0 39:36 -Enum 35:32 SHA3 +UnsignedEnum 35:32 SHA3 0b0000 NI 0b0001 IMP EndEnum Res0 31:24 -Enum 23:20 BF16 +UnsignedEnum 23:20 BF16 0b0000 NI 0b0001 IMP 0b0010 EBF16 EndEnum -Enum 19:16 BitPerm +UnsignedEnum 19:16 BitPerm 0b0000 NI 0b0001 IMP EndEnum Res0 15:8 -Enum 7:4 AES +UnsignedEnum 7:4 AES 0b0000 NI 0b0001 IMP 0b0010 PMULL128 EndEnum -Enum 3:0 SVEver +UnsignedEnum 3:0 SVEver 0b0000 IMP 0b0001 SVE2 0b0010 SVE2p1 @@ -969,38 +970,56 @@ EndEnum EndSysreg Sysreg ID_AA64SMFR0_EL1 3 0 0 4 5 -Enum 63 FA64 +UnsignedEnum 63 FA64 0b0 NI 0b1 IMP EndEnum Res0 62:60 -Enum 59:56 SMEver +UnsignedEnum 59:56 SMEver + 0b0000 SME + 0b0001 SME2 + 0b0010 SME2p1 0b0000 IMP EndEnum -Enum 55:52 I16I64 +UnsignedEnum 55:52 I16I64 0b0000 NI 0b1111 IMP EndEnum Res0 51:49 -Enum 48 F64F64 +UnsignedEnum 48 F64F64 0b0 NI 0b1 IMP EndEnum -Res0 47:40 -Enum 39:36 I8I32 +UnsignedEnum 47:44 I16I32 + 0b0000 NI + 0b0101 IMP +EndEnum +UnsignedEnum 43 B16B16 + 0b0 NI + 0b1 IMP +EndEnum +UnsignedEnum 42 F16F16 + 0b0 NI + 0b1 IMP +EndEnum +Res0 41:40 +UnsignedEnum 39:36 I8I32 0b0000 NI 0b1111 IMP EndEnum -Enum 35 F16F32 +UnsignedEnum 35 F16F32 + 0b0 NI + 0b1 IMP +EndEnum +UnsignedEnum 34 B16F32 0b0 NI 0b1 IMP EndEnum -Enum 34 B16F32 +UnsignedEnum 33 BI32I32 0b0 NI 0b1 IMP EndEnum -Res0 33 -Enum 32 F32F32 +UnsignedEnum 32 F32F32 0b0 NI 0b1 IMP EndEnum @@ -1013,7 +1032,7 @@ Enum 63:60 HPMN0 0b0001 DEF EndEnum Res0 59:56 -Enum 55:52 BRBE +UnsignedEnum 55:52 BRBE 0b0000 NI 0b0001 IMP 0b0010 BRBE_V1P1 @@ -1023,19 +1042,19 @@ Enum 51:48 MTPMU 0b0001 IMP 0b1111 NI EndEnum -Enum 47:44 TraceBuffer +UnsignedEnum 47:44 TraceBuffer 0b0000 NI 0b0001 IMP EndEnum -Enum 43:40 TraceFilt +UnsignedEnum 43:40 TraceFilt 0b0000 NI 0b0001 IMP EndEnum -Enum 39:36 DoubleLock +UnsignedEnum 39:36 DoubleLock 0b0000 IMP 0b1111 NI EndEnum -Enum 35:32 PMSVer +UnsignedEnum 35:32 PMSVer 0b0000 NI 0b0001 IMP 0b0010 V1P1 @@ -1047,7 +1066,7 @@ Res0 27:24 Field 23:20 WRPs Res0 19:16 Field 15:12 BRPs -Enum 11:8 PMUVer +UnsignedEnum 11:8 PMUVer 0b0000 NI 0b0001 IMP 0b0100 V3P1 @@ -1057,11 +1076,11 @@ Enum 11:8 PMUVer 0b1000 V3P8 0b1111 IMP_DEF EndEnum -Enum 7:4 TraceVer +UnsignedEnum 7:4 TraceVer 0b0000 NI 0b0001 IMP EndEnum -Enum 3:0 DebugVer +UnsignedEnum 3:0 DebugVer 0b0110 IMP 0b0111 VHE 0b1000 V8P2 @@ -1091,66 +1110,66 @@ Res0 63:0 EndSysreg Sysreg ID_AA64ISAR0_EL1 3 0 0 6 0 -Enum 63:60 RNDR +UnsignedEnum 63:60 RNDR 0b0000 NI 0b0001 IMP EndEnum -Enum 59:56 TLB +UnsignedEnum 59:56 TLB 0b0000 NI 0b0001 OS 0b0010 RANGE EndEnum -Enum 55:52 TS +UnsignedEnum 55:52 TS 0b0000 NI 0b0001 FLAGM 0b0010 FLAGM2 EndEnum -Enum 51:48 FHM +UnsignedEnum 51:48 FHM 0b0000 NI 0b0001 IMP EndEnum -Enum 47:44 DP +UnsignedEnum 47:44 DP 0b0000 NI 0b0001 IMP EndEnum -Enum 43:40 SM4 +UnsignedEnum 43:40 SM4 0b0000 NI 0b0001 IMP EndEnum -Enum 39:36 SM3 +UnsignedEnum 39:36 SM3 0b0000 NI 0b0001 IMP EndEnum -Enum 35:32 SHA3 +UnsignedEnum 35:32 SHA3 0b0000 NI 0b0001 IMP EndEnum -Enum 31:28 RDM +UnsignedEnum 31:28 RDM 0b0000 NI 0b0001 IMP EndEnum -Enum 27:24 TME +UnsignedEnum 27:24 TME 0b0000 NI 0b0001 IMP EndEnum -Enum 23:20 ATOMIC +UnsignedEnum 23:20 ATOMIC 0b0000 NI 0b0010 IMP EndEnum -Enum 19:16 CRC32 +UnsignedEnum 19:16 CRC32 0b0000 NI 0b0001 IMP EndEnum -Enum 15:12 SHA2 +UnsignedEnum 15:12 SHA2 0b0000 NI 0b0001 SHA256 0b0010 SHA512 EndEnum -Enum 11:8 SHA1 +UnsignedEnum 11:8 SHA1 0b0000 NI 0b0001 IMP EndEnum -Enum 7:4 AES +UnsignedEnum 7:4 AES 0b0000 NI 0b0001 AES 0b0010 PMULL @@ -1159,63 +1178,63 @@ Res0 3:0 EndSysreg Sysreg ID_AA64ISAR1_EL1 3 0 0 6 1 -Enum 63:60 LS64 +UnsignedEnum 63:60 LS64 0b0000 NI 0b0001 LS64 0b0010 LS64_V 0b0011 LS64_ACCDATA EndEnum -Enum 59:56 XS +UnsignedEnum 59:56 XS 0b0000 NI 0b0001 IMP EndEnum -Enum 55:52 I8MM +UnsignedEnum 55:52 I8MM 0b0000 NI 0b0001 IMP EndEnum -Enum 51:48 DGH +UnsignedEnum 51:48 DGH 0b0000 NI 0b0001 IMP EndEnum -Enum 47:44 BF16 +UnsignedEnum 47:44 BF16 0b0000 NI 0b0001 IMP 0b0010 EBF16 EndEnum -Enum 43:40 SPECRES +UnsignedEnum 43:40 SPECRES 0b0000 NI 0b0001 IMP EndEnum -Enum 39:36 SB +UnsignedEnum 39:36 SB 0b0000 NI 0b0001 IMP EndEnum -Enum 35:32 FRINTTS +UnsignedEnum 35:32 FRINTTS 0b0000 NI 0b0001 IMP EndEnum -Enum 31:28 GPI +UnsignedEnum 31:28 GPI 0b0000 NI 0b0001 IMP EndEnum -Enum 27:24 GPA +UnsignedEnum 27:24 GPA 0b0000 NI 0b0001 IMP EndEnum -Enum 23:20 LRCPC +UnsignedEnum 23:20 LRCPC 0b0000 NI 0b0001 IMP 0b0010 LRCPC2 EndEnum -Enum 19:16 FCMA +UnsignedEnum 19:16 FCMA 0b0000 NI 0b0001 IMP EndEnum -Enum 15:12 JSCVT +UnsignedEnum 15:12 JSCVT 0b0000 NI 0b0001 IMP EndEnum -Enum 11:8 API +UnsignedEnum 11:8 API 0b0000 NI 0b0001 PAuth 0b0010 EPAC @@ -1223,7 +1242,7 @@ Enum 11:8 API 0b0100 FPAC 0b0101 FPACCOMBINE EndEnum -Enum 7:4 APA +UnsignedEnum 7:4 APA 0b0000 NI 0b0001 PAuth 0b0010 EPAC @@ -1231,7 +1250,7 @@ Enum 7:4 APA 0b0100 FPAC 0b0101 FPACCOMBINE EndEnum -Enum 3:0 DPB +UnsignedEnum 3:0 DPB 0b0000 NI 0b0001 IMP 0b0010 DPB2 @@ -1240,28 +1259,28 @@ EndSysreg Sysreg ID_AA64ISAR2_EL1 3 0 0 6 2 Res0 63:56 -Enum 55:52 CSSC +UnsignedEnum 55:52 CSSC 0b0000 NI 0b0001 IMP EndEnum -Enum 51:48 RPRFM +UnsignedEnum 51:48 RPRFM 0b0000 NI 0b0001 IMP EndEnum Res0 47:28 -Enum 27:24 PAC_frac +UnsignedEnum 27:24 PAC_frac 0b0000 NI 0b0001 IMP EndEnum -Enum 23:20 BC +UnsignedEnum 23:20 BC 0b0000 NI 0b0001 IMP EndEnum -Enum 19:16 MOPS +UnsignedEnum 19:16 MOPS 0b0000 NI 0b0001 IMP EndEnum -Enum 15:12 APA3 +UnsignedEnum 15:12 APA3 0b0000 NI 0b0001 PAuth 0b0010 EPAC @@ -1269,32 +1288,32 @@ Enum 15:12 APA3 0b0100 FPAC 0b0101 FPACCOMBINE EndEnum -Enum 11:8 GPA3 +UnsignedEnum 11:8 GPA3 0b0000 NI 0b0001 IMP EndEnum -Enum 7:4 RPRES +UnsignedEnum 7:4 RPRES 0b0000 NI 0b0001 IMP EndEnum -Enum 3:0 WFxT +UnsignedEnum 3:0 WFxT 0b0000 NI 0b0010 IMP EndEnum EndSysreg Sysreg ID_AA64MMFR0_EL1 3 0 0 7 0 -Enum 63:60 ECV +UnsignedEnum 63:60 ECV 0b0000 NI 0b0001 IMP 0b0010 CNTPOFF EndEnum -Enum 59:56 FGT +UnsignedEnum 59:56 FGT 0b0000 NI 0b0001 IMP EndEnum Res0 55:48 -Enum 47:44 EXS +UnsignedEnum 47:44 EXS 0b0000 NI 0b0001 IMP EndEnum @@ -1329,15 +1348,15 @@ Enum 23:20 TGRAN16 0b0001 IMP 0b0010 52_BIT EndEnum -Enum 19:16 BIGENDEL0 +UnsignedEnum 19:16 BIGENDEL0 0b0000 NI 0b0001 IMP EndEnum -Enum 15:12 SNSMEM +UnsignedEnum 15:12 SNSMEM 0b0000 NI 0b0001 IMP EndEnum -Enum 11:8 BIGEND +UnsignedEnum 11:8 BIGEND 0b0000 NI 0b0001 IMP EndEnum @@ -1357,62 +1376,62 @@ EndEnum EndSysreg Sysreg ID_AA64MMFR1_EL1 3 0 0 7 1 -Enum 63:60 ECBHB +UnsignedEnum 63:60 ECBHB 0b0000 NI 0b0001 IMP EndEnum -Enum 59:56 CMOW +UnsignedEnum 59:56 CMOW 0b0000 NI 0b0001 IMP EndEnum -Enum 55:52 TIDCP1 +UnsignedEnum 55:52 TIDCP1 0b0000 NI 0b0001 IMP EndEnum -Enum 51:48 nTLBPA +UnsignedEnum 51:48 nTLBPA 0b0000 NI 0b0001 IMP EndEnum -Enum 47:44 AFP +UnsignedEnum 47:44 AFP 0b0000 NI 0b0001 IMP EndEnum -Enum 43:40 HCX +UnsignedEnum 43:40 HCX 0b0000 NI 0b0001 IMP EndEnum -Enum 39:36 ETS +UnsignedEnum 39:36 ETS 0b0000 NI 0b0001 IMP EndEnum -Enum 35:32 TWED +UnsignedEnum 35:32 TWED 0b0000 NI 0b0001 IMP EndEnum -Enum 31:28 XNX +UnsignedEnum 31:28 XNX 0b0000 NI 0b0001 IMP EndEnum -Enum 27:24 SpecSEI +UnsignedEnum 27:24 SpecSEI 0b0000 NI 0b0001 IMP EndEnum -Enum 23:20 PAN +UnsignedEnum 23:20 PAN 0b0000 NI 0b0001 IMP 0b0010 PAN2 0b0011 PAN3 EndEnum -Enum 19:16 LO +UnsignedEnum 19:16 LO 0b0000 NI 0b0001 IMP EndEnum -Enum 15:12 HPDS +UnsignedEnum 15:12 HPDS 0b0000 NI 0b0001 IMP 0b0010 HPDS2 EndEnum -Enum 11:8 VH +UnsignedEnum 11:8 VH 0b0000 NI 0b0001 IMP EndEnum @@ -1420,7 +1439,7 @@ Enum 7:4 VMIDBits 0b0000 8 0b0010 16 EndEnum -Enum 3:0 HAFDBS +UnsignedEnum 3:0 HAFDBS 0b0000 NI 0b0001 AF 0b0010 DBM @@ -1428,26 +1447,26 @@ EndEnum EndSysreg Sysreg ID_AA64MMFR2_EL1 3 0 0 7 2 -Enum 63:60 E0PD +UnsignedEnum 63:60 E0PD 0b0000 NI 0b0001 IMP EndEnum -Enum 59:56 EVT +UnsignedEnum 59:56 EVT 0b0000 NI 0b0001 IMP 0b0010 TTLBxS EndEnum -Enum 55:52 BBM +UnsignedEnum 55:52 BBM 0b0000 0 0b0001 1 0b0010 2 EndEnum -Enum 51:48 TTL +UnsignedEnum 51:48 TTL 0b0000 NI 0b0001 IMP EndEnum Res0 47:44 -Enum 43:40 FWB +UnsignedEnum 43:40 FWB 0b0000 NI 0b0001 IMP EndEnum @@ -1455,7 +1474,7 @@ Enum 39:36 IDS 0b0000 0x0 0b0001 0x18 EndEnum -Enum 35:32 AT +UnsignedEnum 35:32 AT 0b0000 NI 0b0001 IMP EndEnum @@ -1463,7 +1482,7 @@ Enum 31:28 ST 0b0000 39 0b0001 48_47 EndEnum -Enum 27:24 NV +UnsignedEnum 27:24 NV 0b0000 NI 0b0001 IMP 0b0010 NV2 @@ -1476,19 +1495,19 @@ Enum 19:16 VARange 0b0000 48 0b0001 52 EndEnum -Enum 15:12 IESB +UnsignedEnum 15:12 IESB 0b0000 NI 0b0001 IMP EndEnum -Enum 11:8 LSM +UnsignedEnum 11:8 LSM 0b0000 NI 0b0001 IMP EndEnum -Enum 7:4 UAO +UnsignedEnum 7:4 UAO 0b0000 NI 0b0001 IMP EndEnum -Enum 3:0 CnP +UnsignedEnum 3:0 CnP 0b0000 NI 0b0001 IMP EndEnum @@ -1599,7 +1618,8 @@ EndSysreg SysregFields SMCR_ELx Res0 63:32 Field 31 FA64 -Res0 30:9 +Field 30 EZT0 +Res0 29:9 Raz 8:4 Field 3:0 LEN EndSysregFields @@ -1618,6 +1638,130 @@ Sysreg FAR_EL1 3 0 6 0 0 Field 63:0 ADDR EndSysreg +Sysreg PMSCR_EL1 3 0 9 9 0 +Res0 63:8 +Field 7:6 PCT +Field 5 TS +Field 4 PA +Field 3 CX +Res0 2 +Field 1 E1SPE +Field 0 E0SPE +EndSysreg + +Sysreg PMSNEVFR_EL1 3 0 9 9 1 +Field 63:0 E +EndSysreg + +Sysreg PMSICR_EL1 3 0 9 9 2 +Field 63:56 ECOUNT +Res0 55:32 +Field 31:0 COUNT +EndSysreg + +Sysreg PMSIRR_EL1 3 0 9 9 3 +Res0 63:32 +Field 31:8 INTERVAL +Res0 7:1 +Field 0 RND +EndSysreg + +Sysreg PMSFCR_EL1 3 0 9 9 4 +Res0 63:19 +Field 18 ST +Field 17 LD +Field 16 B +Res0 15:4 +Field 3 FnE +Field 2 FL +Field 1 FT +Field 0 FE +EndSysreg + +Sysreg PMSEVFR_EL1 3 0 9 9 5 +Field 63:0 E +EndSysreg + +Sysreg PMSLATFR_EL1 3 0 9 9 6 +Res0 63:16 +Field 15:0 MINLAT +EndSysreg + +Sysreg PMSIDR_EL1 3 0 9 9 7 +Res0 63:25 +Field 24 PBT +Field 23:20 FORMAT +Enum 19:16 COUNTSIZE + 0b0010 12_BIT_SAT + 0b0011 16_BIT_SAT +EndEnum +Field 15:12 MAXSIZE +Enum 11:8 INTERVAL + 0b0000 256 + 0b0010 512 + 0b0011 768 + 0b0100 1024 + 0b0101 1536 + 0b0110 2048 + 0b0111 3072 + 0b1000 4096 +EndEnum +Res0 7 +Field 6 FnE +Field 5 ERND +Field 4 LDS +Field 3 ARCHINST +Field 2 FL +Field 1 FT +Field 0 FE +EndSysreg + +Sysreg PMBLIMITR_EL1 3 0 9 10 0 +Field 63:12 LIMIT +Res0 11:6 +Field 5 PMFZ +Res0 4:3 +Enum 2:1 FM + 0b00 FILL + 0b10 DISCARD +EndEnum +Field 0 E +EndSysreg + +Sysreg PMBPTR_EL1 3 0 9 10 1 +Field 63:0 PTR +EndSysreg + +Sysreg PMBSR_EL1 3 0 9 10 3 +Res0 63:32 +Enum 31:26 EC + 0b000000 BUF + 0b100100 FAULT_S1 + 0b100101 FAULT_S2 + 0b011110 FAULT_GPC + 0b011111 IMP_DEF +EndEnum +Res0 25:20 +Field 19 DL +Field 18 EA +Field 17 S +Field 16 COLL +Field 15:0 MSS +EndSysreg + +Sysreg PMBIDR_EL1 3 0 9 10 7 +Res0 63:12 +Enum 11:8 EA + 0b0000 NotDescribed + 0b0001 Ignored + 0b0010 SError +EndEnum +Res0 7:6 +Field 5 F +Field 4 P +Field 3:0 ALIGN +EndSysreg + SysregFields CONTEXTIDR_ELx Res0 63:32 Field 31:0 PROCID @@ -1772,6 +1916,21 @@ Sysreg FAR_EL2 3 4 6 0 0 Field 63:0 ADDR EndSysreg +Sysreg PMSCR_EL2 3 4 9 9 0 +Res0 63:8 +Enum 7:6 PCT + 0b00 VIRT + 0b01 PHYS + 0b11 GUEST +EndEnum +Field 5 TS +Field 4 PA +Field 3 CX +Res0 2 +Field 1 E2SPE +Field 0 E0HSPE +EndSysreg + Sysreg CONTEXTIDR_EL2 3 4 13 0 1 Fields CONTEXTIDR_ELx EndSysreg @@ -1842,3 +2001,18 @@ Field 23:16 LD Res0 15:8 Field 7:0 LR EndSysreg + +Sysreg ISR_EL1 3 0 12 1 0 +Res0 63:11 +Field 10 IS +Field 9 FS +Field 8 A +Field 7 I +Field 6 F +Res0 5:0 +EndSysreg + +Sysreg ICC_NMIAR1_EL1 3 0 12 9 5 +Res0 63:24 +Field 23:0 INTID +EndSysreg |