summaryrefslogtreecommitdiffstats
path: root/arch/arm
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/boot/dts/Makefile1
-rw-r--r--arch/arm/boot/dts/at91sam9260.dtsi18
-rw-r--r--arch/arm/boot/dts/at91sam9263.dtsi36
-rw-r--r--arch/arm/boot/dts/at91sam9g45.dtsi36
-rw-r--r--arch/arm/boot/dts/at91sam9n12.dtsi26
-rw-r--r--arch/arm/boot/dts/at91sam9x5.dtsi32
-rw-r--r--arch/arm/mach-omap2/board-omap4panda.c6
-rw-r--r--arch/arm/mach-omap2/cclock2420_data.c2
-rw-r--r--arch/arm/mach-omap2/cclock2430_data.c2
-rw-r--r--arch/arm/mach-omap2/cclock44xx_data.c13
-rw-r--r--arch/arm/mach-omap2/devices.c2
-rw-r--r--arch/arm/mach-omap2/drm.c3
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_44xx_data.c6
-rw-r--r--arch/arm/mach-omap2/timer.c8
-rw-r--r--arch/arm/mach-pxa/include/mach/mfp-pxa27x.h3
-rw-r--r--arch/arm/mach-pxa/pxa27x.c4
16 files changed, 173 insertions, 25 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index e44da40d984f..5ebb44fe826a 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -155,6 +155,7 @@ dtb-$(CONFIG_ARCH_VT8500) += vt8500-bv07.dtb \
dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb
targets += dtbs
+targets += $(dtb-y)
endif
# *.dtb used to be generated in the directory above. Clean out the
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index 68bccf41a2c6..cb7bcc51608d 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -306,6 +306,22 @@
};
};
+ ssc0 {
+ pinctrl_ssc0_tx: ssc0_tx-0 {
+ atmel,pins =
+ <1 16 0x1 0x0 /* PB16 periph A */
+ 1 17 0x1 0x0 /* PB17 periph A */
+ 1 18 0x1 0x0>; /* PB18 periph A */
+ };
+
+ pinctrl_ssc0_rx: ssc0_rx-0 {
+ atmel,pins =
+ <1 19 0x1 0x0 /* PB19 periph A */
+ 1 20 0x1 0x0 /* PB20 periph A */
+ 1 21 0x1 0x0>; /* PB21 periph A */
+ };
+ };
+
pioA: gpio@fffff400 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff400 0x200>;
@@ -450,6 +466,8 @@
compatible = "atmel,at91rm9200-ssc";
reg = <0xfffbc000 0x4000>;
interrupts = <14 4 5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index 32ec62cf5385..271d4de026e9 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -271,6 +271,38 @@
};
};
+ ssc0 {
+ pinctrl_ssc0_tx: ssc0_tx-0 {
+ atmel,pins =
+ <1 0 0x2 0x0 /* PB0 periph B */
+ 1 1 0x2 0x0 /* PB1 periph B */
+ 1 2 0x2 0x0>; /* PB2 periph B */
+ };
+
+ pinctrl_ssc0_rx: ssc0_rx-0 {
+ atmel,pins =
+ <1 3 0x2 0x0 /* PB3 periph B */
+ 1 4 0x2 0x0 /* PB4 periph B */
+ 1 5 0x2 0x0>; /* PB5 periph B */
+ };
+ };
+
+ ssc1 {
+ pinctrl_ssc1_tx: ssc1_tx-0 {
+ atmel,pins =
+ <1 6 0x1 0x0 /* PB6 periph A */
+ 1 7 0x1 0x0 /* PB7 periph A */
+ 1 8 0x1 0x0>; /* PB8 periph A */
+ };
+
+ pinctrl_ssc1_rx: ssc1_rx-0 {
+ atmel,pins =
+ <1 9 0x1 0x0 /* PB9 periph A */
+ 1 10 0x1 0x0 /* PB10 periph A */
+ 1 11 0x1 0x0>; /* PB11 periph A */
+ };
+ };
+
pioA: gpio@fffff200 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff200 0x200>;
@@ -368,6 +400,8 @@
compatible = "atmel,at91rm9200-ssc";
reg = <0xfff98000 0x4000>;
interrupts = <16 4 5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
status = "disabled";
};
@@ -375,6 +409,8 @@
compatible = "atmel,at91rm9200-ssc";
reg = <0xfff9c000 0x4000>;
interrupts = <17 4 5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index 231858ffd850..6b1d4cab24c2 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -290,6 +290,38 @@
};
};
+ ssc0 {
+ pinctrl_ssc0_tx: ssc0_tx-0 {
+ atmel,pins =
+ <3 0 0x1 0x0 /* PD0 periph A */
+ 3 1 0x1 0x0 /* PD1 periph A */
+ 3 2 0x1 0x0>; /* PD2 periph A */
+ };
+
+ pinctrl_ssc0_rx: ssc0_rx-0 {
+ atmel,pins =
+ <3 3 0x1 0x0 /* PD3 periph A */
+ 3 4 0x1 0x0 /* PD4 periph A */
+ 3 5 0x1 0x0>; /* PD5 periph A */
+ };
+ };
+
+ ssc1 {
+ pinctrl_ssc1_tx: ssc1_tx-0 {
+ atmel,pins =
+ <3 10 0x1 0x0 /* PD10 periph A */
+ 3 11 0x1 0x0 /* PD11 periph A */
+ 3 12 0x1 0x0>; /* PD12 periph A */
+ };
+
+ pinctrl_ssc1_rx: ssc1_rx-0 {
+ atmel,pins =
+ <3 13 0x1 0x0 /* PD13 periph A */
+ 3 14 0x1 0x0 /* PD14 periph A */
+ 3 15 0x1 0x0>; /* PD15 periph A */
+ };
+ };
+
pioA: gpio@fffff200 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff200 0x200>;
@@ -425,6 +457,8 @@
compatible = "atmel,at91sam9g45-ssc";
reg = <0xfff9c000 0x4000>;
interrupts = <16 4 5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
status = "disabled";
};
@@ -432,6 +466,8 @@
compatible = "atmel,at91sam9g45-ssc";
reg = <0xfffa0000 0x4000>;
interrupts = <17 4 5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index e9efb34f4379..80e29c605d4e 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -28,6 +28,7 @@
tcb1 = &tcb1;
i2c0 = &i2c0;
i2c1 = &i2c1;
+ ssc0 = &ssc0;
};
cpus {
cpu@0 {
@@ -244,6 +245,22 @@
};
};
+ ssc0 {
+ pinctrl_ssc0_tx: ssc0_tx-0 {
+ atmel,pins =
+ <0 24 0x2 0x0 /* PA24 periph B */
+ 0 25 0x2 0x0 /* PA25 periph B */
+ 0 26 0x2 0x0>; /* PA26 periph B */
+ };
+
+ pinctrl_ssc0_rx: ssc0_rx-0 {
+ atmel,pins =
+ <0 27 0x2 0x0 /* PA27 periph B */
+ 0 28 0x2 0x0 /* PA28 periph B */
+ 0 29 0x2 0x0>; /* PA29 periph B */
+ };
+ };
+
pioA: gpio@fffff400 {
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
reg = <0xfffff400 0x200>;
@@ -294,6 +311,15 @@
status = "disabled";
};
+ ssc0: ssc@f0010000 {
+ compatible = "atmel,at91sam9g45-ssc";
+ reg = <0xf0010000 0x4000>;
+ interrupts = <28 4 5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+ status = "disabled";
+ };
+
usart0: serial@f801c000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xf801c000 0x4000>;
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 40ac3a4eb1ab..3a47cf952146 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -88,13 +88,6 @@
interrupts = <1 4 7>;
};
- ssc0: ssc@f0010000 {
- compatible = "atmel,at91sam9g45-ssc";
- reg = <0xf0010000 0x4000>;
- interrupts = <28 4 5>;
- status = "disabled";
- };
-
tcb0: timer@f8008000 {
compatible = "atmel,at91sam9x5-tcb";
reg = <0xf8008000 0x100>;
@@ -290,6 +283,22 @@
};
};
+ ssc0 {
+ pinctrl_ssc0_tx: ssc0_tx-0 {
+ atmel,pins =
+ <0 24 0x2 0x0 /* PA24 periph B */
+ 0 25 0x2 0x0 /* PA25 periph B */
+ 0 26 0x2 0x0>; /* PA26 periph B */
+ };
+
+ pinctrl_ssc0_rx: ssc0_rx-0 {
+ atmel,pins =
+ <0 27 0x2 0x0 /* PA27 periph B */
+ 0 28 0x2 0x0 /* PA28 periph B */
+ 0 29 0x2 0x0>; /* PA29 periph B */
+ };
+ };
+
pioA: gpio@fffff400 {
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
reg = <0xfffff400 0x200>;
@@ -333,6 +342,15 @@
};
};
+ ssc0: ssc@f0010000 {
+ compatible = "atmel,at91sam9g45-ssc";
+ reg = <0xf0010000 0x4000>;
+ interrupts = <28 4 5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+ status = "disabled";
+ };
+
mmc0: mmc@f0008000 {
compatible = "atmel,hsmci";
reg = <0xf0008000 0x600>;
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 5c8e9cee2c2e..769c1feee1c4 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -397,6 +397,12 @@ static struct omap_board_mux board_mux[] __initdata = {
OMAP_PULL_ENA),
OMAP4_MUX(ABE_MCBSP1_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ /* UART2 - BT/FM/GPS shared transport */
+ OMAP4_MUX(UART2_CTS, OMAP_PIN_INPUT | OMAP_MUX_MODE0),
+ OMAP4_MUX(UART2_RTS, OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
+ OMAP4_MUX(UART2_RX, OMAP_PIN_INPUT | OMAP_MUX_MODE0),
+ OMAP4_MUX(UART2_TX, OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
+
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
diff --git a/arch/arm/mach-omap2/cclock2420_data.c b/arch/arm/mach-omap2/cclock2420_data.c
index 7e5febe456d9..ab7e952d2070 100644
--- a/arch/arm/mach-omap2/cclock2420_data.c
+++ b/arch/arm/mach-omap2/cclock2420_data.c
@@ -1935,6 +1935,8 @@ int __init omap2420_clk_init(void)
omap2_init_clk_hw_omap_clocks(c->lk.clk);
}
+ omap2xxx_clkt_vps_late_init();
+
omap2_clk_disable_autoidle_all();
omap2_clk_enable_init_clocks(enable_init_clks,
diff --git a/arch/arm/mach-omap2/cclock2430_data.c b/arch/arm/mach-omap2/cclock2430_data.c
index eda079b96c6a..eb3dab68d536 100644
--- a/arch/arm/mach-omap2/cclock2430_data.c
+++ b/arch/arm/mach-omap2/cclock2430_data.c
@@ -2050,6 +2050,8 @@ int __init omap2430_clk_init(void)
omap2_init_clk_hw_omap_clocks(c->lk.clk);
}
+ omap2xxx_clkt_vps_late_init();
+
omap2_clk_disable_autoidle_all();
omap2_clk_enable_init_clocks(enable_init_clks,
diff --git a/arch/arm/mach-omap2/cclock44xx_data.c b/arch/arm/mach-omap2/cclock44xx_data.c
index 5789a5e25563..a2cc046b47f4 100644
--- a/arch/arm/mach-omap2/cclock44xx_data.c
+++ b/arch/arm/mach-omap2/cclock44xx_data.c
@@ -2026,14 +2026,13 @@ int __init omap4xxx_clk_init(void)
* On OMAP4460 the ABE DPLL fails to turn on if in idle low-power
* state when turning the ABE clock domain. Workaround this by
* locking the ABE DPLL on boot.
+ * Lock the ABE DPLL in any case to avoid issues with audio.
*/
- if (cpu_is_omap446x()) {
- rc = clk_set_parent(&abe_dpll_refclk_mux_ck, &sys_32k_ck);
- if (!rc)
- rc = clk_set_rate(&dpll_abe_ck, OMAP4_DPLL_ABE_DEFFREQ);
- if (rc)
- pr_err("%s: failed to configure ABE DPLL!\n", __func__);
- }
+ rc = clk_set_parent(&abe_dpll_refclk_mux_ck, &sys_32k_ck);
+ if (!rc)
+ rc = clk_set_rate(&dpll_abe_ck, OMAP4_DPLL_ABE_DEFFREQ);
+ if (rc)
+ pr_err("%s: failed to configure ABE DPLL!\n", __func__);
return 0;
}
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 5e304d0719a2..626f3ea3142f 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -639,7 +639,7 @@ static int count_ocp2scp_devices(struct omap_ocp2scp_dev *ocp2scp_dev)
return cnt;
}
-static void omap_init_ocp2scp(void)
+static void __init omap_init_ocp2scp(void)
{
struct omap_hwmod *oh;
struct platform_device *pdev;
diff --git a/arch/arm/mach-omap2/drm.c b/arch/arm/mach-omap2/drm.c
index 4c7566c7e24a..2a2cfa88ddbf 100644
--- a/arch/arm/mach-omap2/drm.c
+++ b/arch/arm/mach-omap2/drm.c
@@ -25,6 +25,7 @@
#include <linux/dma-mapping.h>
#include <linux/platform_data/omap_drm.h>
+#include "soc.h"
#include "omap_device.h"
#include "omap_hwmod.h"
@@ -56,7 +57,7 @@ static int __init omap_init_drm(void)
oh->name);
}
- platform_data.omaprev = GET_OMAP_REVISION();
+ platform_data.omaprev = GET_OMAP_TYPE;
return platform_device_register(&omap_drm_device);
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 129d5081ed15..793f54ac7d14 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -2132,8 +2132,12 @@ static struct omap_hwmod omap44xx_mcpdm_hwmod = {
* currently reset very early during boot, before I2C is
* available, so it doesn't seem that we have any choice in
* the kernel other than to avoid resetting it.
+ *
+ * Also, McPDM needs to be configured to NO_IDLE mode when it
+ * is in used otherwise vital clocks will be gated which
+ * results 'slow motion' audio playback.
*/
- .flags = HWMOD_EXT_OPT_MAIN_CLK,
+ .flags = HWMOD_EXT_OPT_MAIN_CLK | HWMOD_SWSUP_SIDLE,
.mpu_irqs = omap44xx_mcpdm_irqs,
.sdma_reqs = omap44xx_mcpdm_sdma_reqs,
.main_clk = "mcpdm_fck",
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index 691aa674665a..b8ad6e632bb8 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -165,15 +165,11 @@ static struct device_node * __init omap_get_timer_dt(struct of_device_id *match,
struct device_node *np;
for_each_matching_node(np, match) {
- if (!of_device_is_available(np)) {
- of_node_put(np);
+ if (!of_device_is_available(np))
continue;
- }
- if (property && !of_get_property(np, property, NULL)) {
- of_node_put(np);
+ if (property && !of_get_property(np, property, NULL))
continue;
- }
of_add_property(np, &device_disabled);
return np;
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
index a611ad3153c7..b6132aa95dc0 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
@@ -463,6 +463,9 @@
GPIO76_LCD_PCLK, \
GPIO77_LCD_BIAS
+/* these enable a work-around for a hw bug in pxa27x during ac97 warm reset */
+#define GPIO113_AC97_nRESET_GPIO_HIGH MFP_CFG_OUT(GPIO113, AF0, DEFAULT)
+#define GPIO95_AC97_nRESET_GPIO_HIGH MFP_CFG_OUT(GPIO95, AF0, DEFAULT)
extern int keypad_set_wake(unsigned int on);
#endif /* __ASM_ARCH_MFP_PXA27X_H */
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 8047ee0effc5..616cb87b6179 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -47,9 +47,9 @@ void pxa27x_clear_otgph(void)
EXPORT_SYMBOL(pxa27x_clear_otgph);
static unsigned long ac97_reset_config[] = {
- GPIO113_GPIO,
+ GPIO113_AC97_nRESET_GPIO_HIGH,
GPIO113_AC97_nRESET,
- GPIO95_GPIO,
+ GPIO95_AC97_nRESET_GPIO_HIGH,
GPIO95_AC97_nRESET,
};
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 09:20:09 +0000