diff options
Diffstat (limited to 'arch/blackfin/mach-bf527')
-rw-r--r-- | arch/blackfin/mach-bf527/include/mach/defBF52x_base.h | 185 |
1 files changed, 88 insertions, 97 deletions
diff --git a/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h b/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h index fc69cf93f149..6ac2ed7026eb 100644 --- a/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h +++ b/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h @@ -151,7 +151,7 @@ #define TIMER7_CONFIG 0xFFC00670 /* Timer 7 Configuration Register */ #define TIMER7_COUNTER 0xFFC00674 /* Timer 7 Counter Register */ #define TIMER7_PERIOD 0xFFC00678 /* Timer 7 Period Register */ -#define TIMER7_WIDTH 0xFFC0067C /* Timer 7 Width Register */ +#define TIMER7_WIDTH 0xFFC0067C /* Timer 7 Width Register */ #define TIMER_ENABLE 0xFFC00680 /* Timer Enable Register */ #define TIMER_DISABLE 0xFFC00684 /* Timer Disable Register */ @@ -634,18 +634,9 @@ /* PLL_DIV Macros */ #define SET_SSEL(x) ((x)&0xF) /* Set SSEL = 0-15 --> SCLK = VCO/SSEL */ -/* VR_CTL Masks */ -#define FREQ 0x0003 /* Switching Oscillator Frequency For Regulator */ +/* VR_CTL Masks */ +#define FREQ 0x3000 /* Switching Oscillator Frequency For Regulator */ #define HIBERNATE 0x0000 /* Powerdown/Bypass On-Board Regulation */ -#define FREQ_333 0x0001 /* Switching Frequency Is 333 kHz */ -#define FREQ_667 0x0002 /* Switching Frequency Is 667 kHz */ -#define FREQ_1000 0x0003 /* Switching Frequency Is 1 MHz */ - -#define GAIN 0x000C /* Voltage Level Gain */ -#define GAIN_5 0x0000 /* GAIN = 5 */ -#define GAIN_10 0x0004 /* GAIN = 10 */ -#define GAIN_20 0x0008 /* GAIN = 20 */ -#define GAIN_50 0x000C /* GAIN = 50 */ #define VLEV 0x00F0 /* Internal Voltage Level */ #define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */ @@ -660,7 +651,7 @@ #define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */ #define WAKE 0x0100 /* Enable RTC/Reset Wakeup From Hibernate */ -#define CANWE 0x0200 /* Enable CAN Wakeup From Hibernate */ +#define USBWE 0x0200 /* Enable USB Wakeup From Hibernate */ #define PHYWE 0x0400 /* Enable PHY Wakeup From Hibernate */ #define CLKBUFOE 0x4000 /* CLKIN Buffer Output Enable */ #define PHYCLKOE CLKBUFOE /* Alternative legacy name for the above */ @@ -697,16 +688,16 @@ #define IRQ_ERROR1 0x00000002 /* Error Interrupt (DMA, DMARx Block, DMARx Overflow) */ #define IRQ_ERROR2 0x00000004 /* Error Interrupt (CAN, Ethernet, SPORTx, PPI, SPI, UARTx) */ -#define IRQ_RTC 0x00000008 /* Real Time Clock Interrupt */ -#define IRQ_DMA0 0x00000010 /* DMA Channel 0 (PPI) Interrupt */ -#define IRQ_DMA3 0x00000020 /* DMA Channel 3 (SPORT0 RX) Interrupt */ +#define IRQ_RTC 0x00000008 /* Real Time Clock Interrupt */ +#define IRQ_DMA0 0x00000010 /* DMA Channel 0 (PPI) Interrupt */ +#define IRQ_DMA3 0x00000020 /* DMA Channel 3 (SPORT0 RX) Interrupt */ #define IRQ_DMA4 0x00000040 /* DMA Channel 4 (SPORT0 TX) Interrupt */ #define IRQ_DMA5 0x00000080 /* DMA Channel 5 (SPORT1 RX) Interrupt */ #define IRQ_DMA6 0x00000100 /* DMA Channel 6 (SPORT1 TX) Interrupt */ #define IRQ_TWI 0x00000200 /* TWI Interrupt */ #define IRQ_DMA7 0x00000400 /* DMA Channel 7 (SPI) Interrupt */ -#define IRQ_DMA8 0x00000800 /* DMA Channel 8 (UART0 RX) Interrupt */ +#define IRQ_DMA8 0x00000800 /* DMA Channel 8 (UART0 RX) Interrupt */ #define IRQ_DMA9 0x00001000 /* DMA Channel 9 (UART0 TX) Interrupt */ #define IRQ_DMA10 0x00002000 /* DMA Channel 10 (UART1 RX) Interrupt */ #define IRQ_DMA11 0x00004000 /* DMA Channel 11 (UART1 TX) Interrupt */ @@ -801,7 +792,7 @@ #define WDEV_NONE 0x0006 /* no event on roll over */ #define WDEN 0x0FF0 /* enable watchdog */ #define WDDIS 0x0AD0 /* disable watchdog */ -#define WDRO 0x8000 /* watchdog rolled over latch */ +#define WDRO 0x8000 /* watchdog rolled over latch */ /* depreciated WDOG_CTL Register Masks for legacy code */ @@ -882,7 +873,7 @@ #define NINT 0x01 /* Pending Interrupt */ #define IIR_TX_READY 0x02 /* UART_THR empty */ #define IIR_RX_READY 0x04 /* Receive data ready */ -#define IIR_LINE_CHANGE 0x06 /* Receive line status */ +#define IIR_LINE_CHANGE 0x06 /* Receive line status */ #define IIR_STATUS 0x06 /* Highest Priority Pending Interrupt */ /* UARTx_GCTL Masks */ @@ -1638,12 +1629,12 @@ /* entry addresses of the user-callable Boot ROM functions */ -#define _BOOTROM_RESET 0xEF000000 -#define _BOOTROM_FINAL_INIT 0xEF000002 +#define _BOOTROM_RESET 0xEF000000 +#define _BOOTROM_FINAL_INIT 0xEF000002 #define _BOOTROM_DO_MEMORY_DMA 0xEF000006 -#define _BOOTROM_BOOT_DXE_FLASH 0xEF000008 -#define _BOOTROM_BOOT_DXE_SPI 0xEF00000A -#define _BOOTROM_BOOT_DXE_TWI 0xEF00000C +#define _BOOTROM_BOOT_DXE_FLASH 0xEF000008 +#define _BOOTROM_BOOT_DXE_SPI 0xEF00000A +#define _BOOTROM_BOOT_DXE_TWI 0xEF00000C #define _BOOTROM_GET_DXE_ADDRESS_FLASH 0xEF000010 #define _BOOTROM_GET_DXE_ADDRESS_SPI 0xEF000012 #define _BOOTROM_GET_DXE_ADDRESS_TWI 0xEF000014 @@ -1771,71 +1762,71 @@ /* Bit masks for CNT_CONFIG */ #define CNTE 0x1 /* Counter Enable */ -#define nCNTE 0x0 +#define nCNTE 0x0 #define DEBE 0x2 /* Debounce Enable */ -#define nDEBE 0x0 +#define nDEBE 0x0 #define CDGINV 0x10 /* CDG Pin Polarity Invert */ -#define nCDGINV 0x0 +#define nCDGINV 0x0 #define CUDINV 0x20 /* CUD Pin Polarity Invert */ -#define nCUDINV 0x0 +#define nCUDINV 0x0 #define CZMINV 0x40 /* CZM Pin Polarity Invert */ -#define nCZMINV 0x0 +#define nCZMINV 0x0 #define CNTMODE 0x700 /* Counter Operating Mode */ #define ZMZC 0x800 /* CZM Zeroes Counter Enable */ -#define nZMZC 0x0 +#define nZMZC 0x0 #define BNDMODE 0x3000 /* Boundary register Mode */ #define INPDIS 0x8000 /* CUG and CDG Input Disable */ -#define nINPDIS 0x0 +#define nINPDIS 0x0 /* Bit masks for CNT_IMASK */ #define ICIE 0x1 /* Illegal Gray/Binary Code Interrupt Enable */ -#define nICIE 0x0 +#define nICIE 0x0 #define UCIE 0x2 /* Up count Interrupt Enable */ -#define nUCIE 0x0 +#define nUCIE 0x0 #define DCIE 0x4 /* Down count Interrupt Enable */ -#define nDCIE 0x0 +#define nDCIE 0x0 #define MINCIE 0x8 /* Min Count Interrupt Enable */ -#define nMINCIE 0x0 +#define nMINCIE 0x0 #define MAXCIE 0x10 /* Max Count Interrupt Enable */ -#define nMAXCIE 0x0 +#define nMAXCIE 0x0 #define COV31IE 0x20 /* Bit 31 Overflow Interrupt Enable */ -#define nCOV31IE 0x0 +#define nCOV31IE 0x0 #define COV15IE 0x40 /* Bit 15 Overflow Interrupt Enable */ -#define nCOV15IE 0x0 +#define nCOV15IE 0x0 #define CZEROIE 0x80 /* Count to Zero Interrupt Enable */ -#define nCZEROIE 0x0 +#define nCZEROIE 0x0 #define CZMIE 0x100 /* CZM Pin Interrupt Enable */ -#define nCZMIE 0x0 +#define nCZMIE 0x0 #define CZMEIE 0x200 /* CZM Error Interrupt Enable */ -#define nCZMEIE 0x0 +#define nCZMEIE 0x0 #define CZMZIE 0x400 /* CZM Zeroes Counter Interrupt Enable */ -#define nCZMZIE 0x0 +#define nCZMZIE 0x0 /* Bit masks for CNT_STATUS */ #define ICII 0x1 /* Illegal Gray/Binary Code Interrupt Identifier */ -#define nICII 0x0 +#define nICII 0x0 #define UCII 0x2 /* Up count Interrupt Identifier */ -#define nUCII 0x0 +#define nUCII 0x0 #define DCII 0x4 /* Down count Interrupt Identifier */ -#define nDCII 0x0 +#define nDCII 0x0 #define MINCII 0x8 /* Min Count Interrupt Identifier */ -#define nMINCII 0x0 +#define nMINCII 0x0 #define MAXCII 0x10 /* Max Count Interrupt Identifier */ -#define nMAXCII 0x0 +#define nMAXCII 0x0 #define COV31II 0x20 /* Bit 31 Overflow Interrupt Identifier */ -#define nCOV31II 0x0 +#define nCOV31II 0x0 #define COV15II 0x40 /* Bit 15 Overflow Interrupt Identifier */ -#define nCOV15II 0x0 +#define nCOV15II 0x0 #define CZEROII 0x80 /* Count to Zero Interrupt Identifier */ -#define nCZEROII 0x0 +#define nCZEROII 0x0 #define CZMII 0x100 /* CZM Pin Interrupt Identifier */ -#define nCZMII 0x0 +#define nCZMII 0x0 #define CZMEII 0x200 /* CZM Error Interrupt Identifier */ -#define nCZMEII 0x0 +#define nCZMEII 0x0 #define CZMZII 0x400 /* CZM Zeroes Counter Interrupt Identifier */ -#define nCZMZII 0x0 +#define nCZMZII 0x0 /* Bit masks for CNT_COMMAND */ @@ -1843,7 +1834,7 @@ #define W1LMIN 0xf0 /* Load Min Register */ #define W1LMAX 0xf00 /* Load Max Register */ #define W1ZMONCE 0x1000 /* Enable CZM Clear Counter Once */ -#define nW1ZMONCE 0x0 +#define nW1ZMONCE 0x0 /* Bit masks for CNT_DEBOUNCE */ @@ -1853,15 +1844,15 @@ #define FUSE_FADDR 0x1ff /* OTP/Fuse Address */ #define FIEN 0x800 /* OTP/Fuse Interrupt Enable */ -#define nFIEN 0x0 +#define nFIEN 0x0 #define FTESTDEC 0x1000 /* OTP/Fuse Test Decoder */ -#define nFTESTDEC 0x0 +#define nFTESTDEC 0x0 #define FWRTEST 0x2000 /* OTP/Fuse Write Test */ -#define nFWRTEST 0x0 +#define nFWRTEST 0x0 #define FRDEN 0x4000 /* OTP/Fuse Read Enable */ -#define nFRDEN 0x0 +#define nFRDEN 0x0 #define FWREN 0x8000 /* OTP/Fuse Write Enable */ -#define nFWREN 0x0 +#define nFWREN 0x0 /* Bit masks for OTP_BEN */ @@ -1870,15 +1861,15 @@ /* Bit masks for OTP_STATUS */ #define FCOMP 0x1 /* OTP/Fuse Access Complete */ -#define nFCOMP 0x0 +#define nFCOMP 0x0 #define FERROR 0x2 /* OTP/Fuse Access Error */ -#define nFERROR 0x0 +#define nFERROR 0x0 #define MMRGLOAD 0x10 /* Memory Mapped Register Gasket Load */ -#define nMMRGLOAD 0x0 +#define nMMRGLOAD 0x0 #define MMRGLOCK 0x20 /* Memory Mapped Register Gasket Lock */ -#define nMMRGLOCK 0x0 +#define nMMRGLOCK 0x0 #define FPGMEN 0x40 /* OTP/Fuse Program Enable */ -#define nFPGMEN 0x0 +#define nFPGMEN 0x0 /* Bit masks for OTP_TIMING */ @@ -1892,42 +1883,42 @@ /* Bit masks for SECURE_SYSSWT */ #define EMUDABL 0x1 /* Emulation Disable. */ -#define nEMUDABL 0x0 +#define nEMUDABL 0x0 #define RSTDABL 0x2 /* Reset Disable */ -#define nRSTDABL 0x0 +#define nRSTDABL 0x0 #define L1IDABL 0x1c /* L1 Instruction Memory Disable. */ #define L1DADABL 0xe0 /* L1 Data Bank A Memory Disable. */ #define L1DBDABL 0x700 /* L1 Data Bank B Memory Disable. */ #define DMA0OVR 0x800 /* DMA0 Memory Access Override */ -#define nDMA0OVR 0x0 +#define nDMA0OVR 0x0 #define DMA1OVR 0x1000 /* DMA1 Memory Access Override */ -#define nDMA1OVR 0x0 +#define nDMA1OVR 0x0 #define EMUOVR 0x4000 /* Emulation Override */ -#define nEMUOVR 0x0 +#define nEMUOVR 0x0 #define OTPSEN 0x8000 /* OTP Secrets Enable. */ -#define nOTPSEN 0x0 +#define nOTPSEN 0x0 #define L2DABL 0x70000 /* L2 Memory Disable. */ /* Bit masks for SECURE_CONTROL */ #define SECURE0 0x1 /* SECURE 0 */ -#define nSECURE0 0x0 +#define nSECURE0 0x0 #define SECURE1 0x2 /* SECURE 1 */ -#define nSECURE1 0x0 +#define nSECURE1 0x0 #define SECURE2 0x4 /* SECURE 2 */ -#define nSECURE2 0x0 +#define nSECURE2 0x0 #define SECURE3 0x8 /* SECURE 3 */ -#define nSECURE3 0x0 +#define nSECURE3 0x0 /* Bit masks for SECURE_STATUS */ #define SECMODE 0x3 /* Secured Mode Control State */ #define NMI 0x4 /* Non Maskable Interrupt */ -#define nNMI 0x0 +#define nNMI 0x0 #define AFVALID 0x8 /* Authentication Firmware Valid */ -#define nAFVALID 0x0 +#define nAFVALID 0x0 #define AFEXIT 0x10 /* Authentication Firmware Exit */ -#define nAFEXIT 0x0 +#define nAFEXIT 0x0 #define SECSTAT 0xe0 /* Secure Status */ /* Bit masks for NFC_CTL */ @@ -1935,60 +1926,60 @@ #define WR_DLY 0xf /* Write Strobe Delay */ #define RD_DLY 0xf0 /* Read Strobe Delay */ #define NWIDTH 0x100 /* NAND Data Width */ -#define nNWIDTH 0x0 +#define nNWIDTH 0x0 #define PG_SIZE 0x200 /* Page Size */ -#define nPG_SIZE 0x0 +#define nPG_SIZE 0x0 /* Bit masks for NFC_STAT */ #define NBUSY 0x1 /* Not Busy */ -#define nNBUSY 0x0 +#define nNBUSY 0x0 #define WB_FULL 0x2 /* Write Buffer Full */ -#define nWB_FULL 0x0 +#define nWB_FULL 0x0 #define PG_WR_STAT 0x4 /* Page Write Pending */ -#define nPG_WR_STAT 0x0 +#define nPG_WR_STAT 0x0 #define PG_RD_STAT 0x8 /* Page Read Pending */ -#define nPG_RD_STAT 0x0 +#define nPG_RD_STAT 0x0 #define WB_EMPTY 0x10 /* Write Buffer Empty */ -#define nWB_EMPTY 0x0 +#define nWB_EMPTY 0x0 /* Bit masks for NFC_IRQSTAT */ #define NBUSYIRQ 0x1 /* Not Busy IRQ */ -#define nNBUSYIRQ 0x0 +#define nNBUSYIRQ 0x0 #define WB_OVF 0x2 /* Write Buffer Overflow */ -#define nWB_OVF 0x0 +#define nWB_OVF 0x0 #define WB_EDGE 0x4 /* Write Buffer Edge Detect */ -#define nWB_EDGE 0x0 +#define nWB_EDGE 0x0 #define RD_RDY 0x8 /* Read Data Ready */ -#define nRD_RDY 0x0 +#define nRD_RDY 0x0 #define WR_DONE 0x10 /* Page Write Done */ -#define nWR_DONE 0x0 +#define nWR_DONE 0x0 /* Bit masks for NFC_IRQMASK */ #define MASK_BUSYIRQ 0x1 /* Mask Not Busy IRQ */ -#define nMASK_BUSYIRQ 0x0 +#define nMASK_BUSYIRQ 0x0 #define MASK_WBOVF 0x2 /* Mask Write Buffer Overflow */ -#define nMASK_WBOVF 0x0 +#define nMASK_WBOVF 0x0 #define MASK_WBEMPTY 0x4 /* Mask Write Buffer Empty */ -#define nMASK_WBEMPTY 0x0 +#define nMASK_WBEMPTY 0x0 #define MASK_RDRDY 0x8 /* Mask Read Data Ready */ -#define nMASK_RDRDY 0x0 +#define nMASK_RDRDY 0x0 #define MASK_WRDONE 0x10 /* Mask Write Done */ -#define nMASK_WRDONE 0x0 +#define nMASK_WRDONE 0x0 /* Bit masks for NFC_RST */ #define ECC_RST 0x1 /* ECC (and NFC counters) Reset */ -#define nECC_RST 0x0 +#define nECC_RST 0x0 /* Bit masks for NFC_PGCTL */ #define PG_RD_START 0x1 /* Page Read Start */ -#define nPG_RD_START 0x0 +#define nPG_RD_START 0x0 #define PG_WR_START 0x2 /* Page Write Start */ -#define nPG_WR_START 0x0 +#define nPG_WR_START 0x0 /* Bit masks for NFC_ECC0 */ |