diff options
Diffstat (limited to 'arch/m32r/include/asm/system.h')
| -rw-r--r-- | arch/m32r/include/asm/system.h | 431 |
1 files changed, 431 insertions, 0 deletions
diff --git a/arch/m32r/include/asm/system.h b/arch/m32r/include/asm/system.h new file mode 100644 index 000000000000..c980f5ba8de7 --- /dev/null +++ b/arch/m32r/include/asm/system.h @@ -0,0 +1,431 @@ +#ifndef _ASM_M32R_SYSTEM_H +#define _ASM_M32R_SYSTEM_H + +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 Hiroyuki Kondo, Hirokazu Takata, and Hitoshi Yamamoto + * Copyright (C) 2004, 2006 Hirokazu Takata <takata at linux-m32r.org> + */ + +#include <linux/compiler.h> +#include <asm/assembler.h> + +#ifdef __KERNEL__ + +/* + * switch_to(prev, next) should switch from task `prev' to `next' + * `prev' will never be the same as `next'. + * + * `next' and `prev' should be struct task_struct, but it isn't always defined + */ + +#if defined(CONFIG_FRAME_POINTER) || \ + !defined(CONFIG_SCHED_OMIT_FRAME_POINTER) +#define M32R_PUSH_FP " push fp\n" +#define M32R_POP_FP " pop fp\n" +#else +#define M32R_PUSH_FP "" +#define M32R_POP_FP "" +#endif + +#define switch_to(prev, next, last) do { \ + __asm__ __volatile__ ( \ + " seth lr, #high(1f) \n" \ + " or3 lr, lr, #low(1f) \n" \ + " st lr, @%4 ; store old LR \n" \ + " ld lr, @%5 ; load new LR \n" \ + M32R_PUSH_FP \ + " st sp, @%2 ; store old SP \n" \ + " ld sp, @%3 ; load new SP \n" \ + " push %1 ; store `prev' on new stack \n" \ + " jmp lr \n" \ + " .fillinsn \n" \ + "1: \n" \ + " pop %0 ; restore `__last' from new stack \n" \ + M32R_POP_FP \ + : "=r" (last) \ + : "0" (prev), \ + "r" (&(prev->thread.sp)), "r" (&(next->thread.sp)), \ + "r" (&(prev->thread.lr)), "r" (&(next->thread.lr)) \ + : "memory", "lr" \ + ); \ +} while(0) + +/* Interrupt Control */ +#if !defined(CONFIG_CHIP_M32102) && !defined(CONFIG_CHIP_M32104) +#define local_irq_enable() \ + __asm__ __volatile__ ("setpsw #0x40 -> nop": : :"memory") +#define local_irq_disable() \ + __asm__ __volatile__ ("clrpsw #0x40 -> nop": : :"memory") +#else /* CONFIG_CHIP_M32102 || CONFIG_CHIP_M32104 */ +static inline void local_irq_enable(void) +{ + unsigned long tmpreg; + __asm__ __volatile__( + "mvfc %0, psw; \n\t" + "or3 %0, %0, #0x0040; \n\t" + "mvtc %0, psw; \n\t" + : "=&r" (tmpreg) : : "cbit", "memory"); +} + +static inline void local_irq_disable(void) +{ + unsigned long tmpreg0, tmpreg1; + __asm__ __volatile__( + "ld24 %0, #0 ; Use 32-bit insn. \n\t" + "mvfc %1, psw ; No interrupt can be accepted here. \n\t" + "mvtc %0, psw \n\t" + "and3 %0, %1, #0xffbf \n\t" + "mvtc %0, psw \n\t" + : "=&r" (tmpreg0), "=&r" (tmpreg1) : : "cbit", "memory"); +} +#endif /* CONFIG_CHIP_M32102 || CONFIG_CHIP_M32104 */ + +#define local_save_flags(x) \ + __asm__ __volatile__("mvfc %0,psw" : "=r"(x) : /* no input */) + +#define local_irq_restore(x) \ + __asm__ __volatile__("mvtc %0,psw" : /* no outputs */ \ + : "r" (x) : "cbit", "memory") + +#if !(defined(CONFIG_CHIP_M32102) || defined(CONFIG_CHIP_M32104)) +#define local_irq_save(x) \ + __asm__ __volatile__( \ + "mvfc %0, psw; \n\t" \ + "clrpsw #0x40 -> nop; \n\t" \ + : "=r" (x) : /* no input */ : "memory") +#else /* CONFIG_CHIP_M32102 || CONFIG_CHIP_M32104 */ +#define local_irq_save(x) \ + ({ \ + unsigned long tmpreg; \ + __asm__ __volatile__( \ + "ld24 %1, #0 \n\t" \ + "mvfc %0, psw \n\t" \ + "mvtc %1, psw \n\t" \ + "and3 %1, %0, #0xffbf \n\t" \ + "mvtc %1, psw \n\t" \ + : "=r" (x), "=&r" (tmpreg) \ + : : "cbit", "memory"); \ + }) +#endif /* CONFIG_CHIP_M32102 || CONFIG_CHIP_M32104 */ + +#define irqs_disabled() \ + ({ \ + unsigned long flags; \ + local_save_flags(flags); \ + !(flags & 0x40); \ + }) + +#define nop() __asm__ __volatile__ ("nop" : : ) + +#define xchg(ptr, x) \ + ((__typeof__(*(ptr)))__xchg((unsigned long)(x), (ptr), sizeof(*(ptr)))) +#define xchg_local(ptr, x) \ + ((__typeof__(*(ptr)))__xchg_local((unsigned long)(x), (ptr), \ + sizeof(*(ptr)))) + +extern void __xchg_called_with_bad_pointer(void); + +#ifdef CONFIG_CHIP_M32700_TS1 +#define DCACHE_CLEAR(reg0, reg1, addr) \ + "seth "reg1", #high(dcache_dummy); \n\t" \ + "or3 "reg1", "reg1", #low(dcache_dummy); \n\t" \ + "lock "reg0", @"reg1"; \n\t" \ + "add3 "reg0", "addr", #0x1000; \n\t" \ + "ld "reg0", @"reg0"; \n\t" \ + "add3 "reg0", "addr", #0x2000; \n\t" \ + "ld "reg0", @"reg0"; \n\t" \ + "unlock "reg0", @"reg1"; \n\t" + /* FIXME: This workaround code cannot handle kernel modules + * correctly under SMP environment. + */ +#else /* CONFIG_CHIP_M32700_TS1 */ +#define DCACHE_CLEAR(reg0, reg1, addr) +#endif /* CONFIG_CHIP_M32700_TS1 */ + +static __always_inline unsigned long +__xchg(unsigned long x, volatile void *ptr, int size) +{ + unsigned long flags; + unsigned long tmp = 0; + + local_irq_save(flags); + + switch (size) { +#ifndef CONFIG_SMP + case 1: + __asm__ __volatile__ ( + "ldb %0, @%2 \n\t" + "stb %1, @%2 \n\t" + : "=&r" (tmp) : "r" (x), "r" (ptr) : "memory"); + break; + case 2: + __asm__ __volatile__ ( + "ldh %0, @%2 \n\t" + "sth %1, @%2 \n\t" + : "=&r" (tmp) : "r" (x), "r" (ptr) : "memory"); + break; + case 4: + __asm__ __volatile__ ( + "ld %0, @%2 \n\t" + "st %1, @%2 \n\t" + : "=&r" (tmp) : "r" (x), "r" (ptr) : "memory"); + break; +#else /* CONFIG_SMP */ + case 4: + __asm__ __volatile__ ( + DCACHE_CLEAR("%0", "r4", "%2") + "lock %0, @%2; \n\t" + "unlock %1, @%2; \n\t" + : "=&r" (tmp) : "r" (x), "r" (ptr) + : "memory" +#ifdef CONFIG_CHIP_M32700_TS1 + , "r4" +#endif /* CONFIG_CHIP_M32700_TS1 */ + ); + break; +#endif /* CONFIG_SMP */ + default: + __xchg_called_with_bad_pointer(); + } + + local_irq_restore(flags); + + return (tmp); +} + +static __always_inline unsigned long +__xchg_local(unsigned long x, volatile void *ptr, int size) +{ + unsigned long flags; + unsigned long tmp = 0; + + local_irq_save(flags); + + switch (size) { + case 1: + __asm__ __volatile__ ( + "ldb %0, @%2 \n\t" + "stb %1, @%2 \n\t" + : "=&r" (tmp) : "r" (x), "r" (ptr) : "memory"); + break; + case 2: + __asm__ __volatile__ ( + "ldh %0, @%2 \n\t" + "sth %1, @%2 \n\t" + : "=&r" (tmp) : "r" (x), "r" (ptr) : "memory"); + break; + case 4: + __asm__ __volatile__ ( + "ld %0, @%2 \n\t" + "st %1, @%2 \n\t" + : "=&r" (tmp) : "r" (x), "r" (ptr) : "memory"); + break; + default: + __xchg_called_with_bad_pointer(); + } + + local_irq_restore(flags); + + return (tmp); +} + +#define __HAVE_ARCH_CMPXCHG 1 + +static inline unsigned long +__cmpxchg_u32(volatile unsigned int *p, unsigned int old, unsigned int new) +{ + unsigned long flags; + unsigned int retval; + + local_irq_save(flags); + __asm__ __volatile__ ( + DCACHE_CLEAR("%0", "r4", "%1") + M32R_LOCK" %0, @%1; \n" + " bne %0, %2, 1f; \n" + M32R_UNLOCK" %3, @%1; \n" + " bra 2f; \n" + " .fillinsn \n" + "1:" + M32R_UNLOCK" %0, @%1; \n" + " .fillinsn \n" + "2:" + : "=&r" (retval) + : "r" (p), "r" (old), "r" (new) + : "cbit", "memory" +#ifdef CONFIG_CHIP_M32700_TS1 + , "r4" +#endif /* CONFIG_CHIP_M32700_TS1 */ + ); + local_irq_restore(flags); + + return retval; +} + +static inline unsigned long +__cmpxchg_local_u32(volatile unsigned int *p, unsigned int old, + unsigned int new) +{ + unsigned long flags; + unsigned int retval; + + local_irq_save(flags); + __asm__ __volatile__ ( + DCACHE_CLEAR("%0", "r4", "%1") + "ld %0, @%1; \n" + " bne %0, %2, 1f; \n" + "st %3, @%1; \n" + " bra 2f; \n" + " .fillinsn \n" + "1:" + "st %0, @%1; \n" + " .fillinsn \n" + "2:" + : "=&r" (retval) + : "r" (p), "r" (old), "r" (new) + : "cbit", "memory" +#ifdef CONFIG_CHIP_M32700_TS1 + , "r4" +#endif /* CONFIG_CHIP_M32700_TS1 */ + ); + local_irq_restore(flags); + + return retval; +} + +/* This function doesn't exist, so you'll get a linker error + if something tries to do an invalid cmpxchg(). */ +extern void __cmpxchg_called_with_bad_pointer(void); + +static inline unsigned long +__cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, int size) +{ + switch (size) { + case 4: + return __cmpxchg_u32(ptr, old, new); +#if 0 /* we don't have __cmpxchg_u64 */ + case 8: + return __cmpxchg_u64(ptr, old, new); +#endif /* 0 */ + } + __cmpxchg_called_with_bad_pointer(); + return old; +} + +#define cmpxchg(ptr, o, n) \ + ((__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)(o), \ + (unsigned long)(n), sizeof(*(ptr)))) + +#include <asm-generic/cmpxchg-local.h> + +static inline unsigned long __cmpxchg_local(volatile void *ptr, + unsigned long old, + unsigned long new, int size) +{ + switch (size) { + case 4: + return __cmpxchg_local_u32(ptr, old, new); + default: + return __cmpxchg_local_generic(ptr, old, new, size); + } + + return old; +} + +/* + * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make + * them available. + */ +#define cmpxchg_local(ptr, o, n) \ + ((__typeof__(*(ptr)))__cmpxchg_local((ptr), (unsigned long)(o), \ + (unsigned long)(n), sizeof(*(ptr)))) +#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) + +#endif /* __KERNEL__ */ + +/* + * Memory barrier. + * + * mb() prevents loads and stores being reordered across this point. + * rmb() prevents loads being reordered across this point. + * wmb() prevents stores being reordered across this point. + */ +#define mb() barrier() +#define rmb() mb() +#define wmb() mb() + +/** + * read_barrier_depends - Flush all pending reads that subsequents reads + * depend on. + * + * No data-dependent reads from memory-like regions are ever reordered + * over this barrier. All reads preceding this primitive are guaranteed + * to access memory (but not necessarily other CPUs' caches) before any + * reads following this primitive that depend on the data return by + * any of the preceding reads. This primitive is much lighter weight than + * rmb() on most CPUs, and is never heavier weight than is + * rmb(). + * + * These ordering constraints are respected by both the local CPU + * and the compiler. + * + * Ordering is not guaranteed by anything other than these primitives, + * not even by data dependencies. See the documentation for + * memory_barrier() for examples and URLs to more information. + * + * For example, the following code would force ordering (the initial + * value of "a" is zero, "b" is one, and "p" is "&a"): + * + * <programlisting> + * CPU 0 CPU 1 + * + * b = 2; + * memory_barrier(); + * p = &b; q = p; + * read_barrier_depends(); + * d = *q; + * </programlisting> + * + * + * because the read of "*q" depends on the read of "p" and these + * two reads are separated by a read_barrier_depends(). However, + * the following code, with the same initial values for "a" and "b": + * + * <programlisting> + * CPU 0 CPU 1 + * + * a = 2; + * memory_barrier(); + * b = 3; y = b; + * read_barrier_depends(); + * x = a; + * </programlisting> + * + * does not enforce ordering, since there is no data dependency between + * the read of "a" and the read of "b". Therefore, on some CPUs, such + * as Alpha, "y" could be set to 3 and "x" to 0. Use rmb() + * in cases like this where there are no data dependencies. + **/ + +#define read_barrier_depends() do { } while (0) + +#ifdef CONFIG_SMP +#define smp_mb() mb() +#define smp_rmb() rmb() +#define smp_wmb() wmb() +#define smp_read_barrier_depends() read_barrier_depends() +#define set_mb(var, value) do { (void) xchg(&var, value); } while (0) +#else +#define smp_mb() barrier() +#define smp_rmb() barrier() +#define smp_wmb() barrier() +#define smp_read_barrier_depends() do { } while (0) +#define set_mb(var, value) do { var = value; barrier(); } while (0) +#endif + +#define arch_align_stack(x) (x) + +#endif /* _ASM_M32R_SYSTEM_H */ |