diff options
Diffstat (limited to 'arch/mips/boot/dts')
48 files changed, 2221 insertions, 138 deletions
diff --git a/arch/mips/boot/dts/Makefile b/arch/mips/boot/dts/Makefile index 4f49fa477f14..5d95e4bd709a 100644 --- a/arch/mips/boot/dts/Makefile +++ b/arch/mips/boot/dts/Makefile @@ -1,21 +1,12 @@ -dtb-$(CONFIG_BCM3384) += bcm93384wvg.dtb -dtb-$(CONFIG_CAVIUM_OCTEON_SOC) += octeon_3xxx.dtb octeon_68xx.dtb -dtb-$(CONFIG_DT_EASY50712) += easy50712.dtb -dtb-$(CONFIG_DT_XLP_EVP) += xlp_evp.dtb -dtb-$(CONFIG_DT_XLP_SVP) += xlp_svp.dtb -dtb-$(CONFIG_DT_XLP_FVP) += xlp_fvp.dtb -dtb-$(CONFIG_DT_XLP_GVP) += xlp_gvp.dtb -dtb-$(CONFIG_DTB_RT2880_EVAL) += rt2880_eval.dtb -dtb-$(CONFIG_DTB_RT305X_EVAL) += rt3052_eval.dtb -dtb-$(CONFIG_DTB_RT3883_EVAL) += rt3883_eval.dtb -dtb-$(CONFIG_DTB_MT7620A_EVAL) += mt7620a_eval.dtb -dtb-$(CONFIG_MIPS_SEAD3) += sead3.dtb - -obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y)) - -targets += dtbs -targets += $(dtb-y) - -dtbs: $(addprefix $(obj)/, $(dtb-y)) - -clean-files += *.dtb *.dtb.S +dts-dirs += brcm +dts-dirs += cavium-octeon +dts-dirs += lantiq +dts-dirs += mti +dts-dirs += netlogic +dts-dirs += ralink + +obj-y := $(addsuffix /, $(dts-dirs)) + +always := $(dtb-y) +subdir-y := $(dts-dirs) +clean-files := *.dtb *.dtb.S diff --git a/arch/mips/boot/dts/bcm3384.dtsi b/arch/mips/boot/dts/bcm3384.dtsi deleted file mode 100644 index 21b074a99c94..000000000000 --- a/arch/mips/boot/dts/bcm3384.dtsi +++ /dev/null @@ -1,109 +0,0 @@ -/ { - #address-cells = <1>; - #size-cells = <1>; - compatible = "brcm,bcm3384", "brcm,bcm33843"; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - /* On BMIPS5000 this is 1/8th of the CPU core clock */ - mips-hpt-frequency = <100000000>; - - cpu@0 { - compatible = "brcm,bmips5000"; - device_type = "cpu"; - reg = <0>; - }; - - cpu@1 { - compatible = "brcm,bmips5000"; - device_type = "cpu"; - reg = <1>; - }; - }; - - clocks { - #address-cells = <1>; - #size-cells = <0>; - - periph_clk: periph_clk@0 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <54000000>; - }; - }; - - aliases { - uart0 = &uart0; - }; - - cpu_intc: cpu_intc@0 { - #address-cells = <0>; - compatible = "mti,cpu-interrupt-controller"; - - interrupt-controller; - #interrupt-cells = <1>; - }; - - periph_intc: periph_intc@14e00038 { - compatible = "brcm,bcm3384-intc"; - reg = <0x14e00038 0x8 0x14e00340 0x8>; - - interrupt-controller; - #interrupt-cells = <1>; - - interrupt-parent = <&cpu_intc>; - interrupts = <4>; - }; - - zmips_intc: zmips_intc@104b0060 { - compatible = "brcm,bcm3384-intc"; - reg = <0x104b0060 0x8>; - - interrupt-controller; - #interrupt-cells = <1>; - - interrupt-parent = <&periph_intc>; - interrupts = <29>; - }; - - iop_intc: iop_intc@14e00058 { - compatible = "brcm,bcm3384-intc"; - reg = <0x14e00058 0x8>; - - interrupt-controller; - #interrupt-cells = <1>; - - interrupt-parent = <&cpu_intc>; - interrupts = <6>; - }; - - uart0: serial@14e00520 { - compatible = "brcm,bcm6345-uart"; - reg = <0x14e00520 0x18>; - interrupt-parent = <&periph_intc>; - interrupts = <2>; - clocks = <&periph_clk>; - status = "disabled"; - }; - - ehci0: usb@15400300 { - compatible = "brcm,bcm3384-ehci", "generic-ehci"; - reg = <0x15400300 0x100>; - big-endian; - interrupt-parent = <&periph_intc>; - interrupts = <41>; - status = "disabled"; - }; - - ohci0: usb@15400400 { - compatible = "brcm,bcm3384-ohci", "generic-ohci"; - reg = <0x15400400 0x100>; - big-endian; - no-big-frame-no; - interrupt-parent = <&periph_intc>; - interrupts = <40>; - status = "disabled"; - }; -}; diff --git a/arch/mips/boot/dts/brcm/Makefile b/arch/mips/boot/dts/brcm/Makefile new file mode 100644 index 000000000000..1c8353bfe003 --- /dev/null +++ b/arch/mips/boot/dts/brcm/Makefile @@ -0,0 +1,19 @@ +dtb-$(CONFIG_DT_BCM93384WVG) += bcm93384wvg.dtb +dtb-$(CONFIG_DT_BCM93384WVG_VIPER) += bcm93384wvg_viper.dtb +dtb-$(CONFIG_DT_BCM96368MVWG) += bcm96368mvwg.dtb +dtb-$(CONFIG_DT_BCM9EJTAGPRB) += bcm9ejtagprb.dtb +dtb-$(CONFIG_DT_BCM97125CBMB) += bcm97125cbmb.dtb +dtb-$(CONFIG_DT_BCM97346DBSMB) += bcm97346dbsmb.dtb +dtb-$(CONFIG_DT_BCM97358SVMB) += bcm97358svmb.dtb +dtb-$(CONFIG_DT_BCM97360SVMB) += bcm97360svmb.dtb +dtb-$(CONFIG_DT_BCM97362SVMB) += bcm97362svmb.dtb +dtb-$(CONFIG_DT_BCM97420C) += bcm97420c.dtb +dtb-$(CONFIG_DT_BCM97425SVMB) += bcm97425svmb.dtb + +obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y)) + +# Force kbuild to make empty built-in.o if necessary +obj- += dummy.o + +always := $(dtb-y) +clean-files := *.dtb *.dtb.S diff --git a/arch/mips/boot/dts/brcm/bcm3384_viper.dtsi b/arch/mips/boot/dts/brcm/bcm3384_viper.dtsi new file mode 100644 index 000000000000..aa406b43c65f --- /dev/null +++ b/arch/mips/boot/dts/brcm/bcm3384_viper.dtsi @@ -0,0 +1,108 @@ +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "brcm,bcm3384-viper", "brcm,bcm33843-viper"; + + memory@0 { + device_type = "memory"; + + /* Typical ranges. The bootloader should fill these in. */ + reg = <0x06000000 0x02000000>, + <0x0e000000 0x02000000>; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + /* 1/2 of the CPU core clock (standard MIPS behavior) */ + mips-hpt-frequency = <300000000>; + + cpu@0 { + compatible = "brcm,bmips4350"; + device_type = "cpu"; + reg = <0>; + }; + }; + + cpu_intc: cpu_intc { + #address-cells = <0>; + compatible = "mti,cpu-interrupt-controller"; + + interrupt-controller; + #interrupt-cells = <1>; + }; + + clocks { + periph_clk: periph_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <54000000>; + }; + }; + + aliases { + uart0 = &uart0; + }; + + ubus { + #address-cells = <1>; + #size-cells = <1>; + + compatible = "brcm,ubus", "simple-bus"; + ranges; + /* No dma-ranges on Viper. */ + + periph_intc: periph_intc@14e00048 { + compatible = "brcm,bcm3380-l2-intc"; + reg = <0x14e00048 0x4 0x14e0004c 0x4>, + <0x14e00350 0x4 0x14e00354 0x4>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&cpu_intc>; + interrupts = <4>; + }; + + cmips_intc: cmips_intc@151f8048 { + compatible = "brcm,bcm3380-l2-intc"; + reg = <0x151f8048 0x4 0x151f804c 0x4>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&periph_intc>; + interrupts = <30>; + brcm,int-map-mask = <0xffffffff>; + }; + + uart0: serial@14e00520 { + compatible = "brcm,bcm6345-uart"; + reg = <0x14e00520 0x18>; + interrupt-parent = <&periph_intc>; + interrupts = <2>; + clocks = <&periph_clk>; + status = "disabled"; + }; + + ehci0: usb@15400300 { + compatible = "brcm,bcm3384-ehci", "generic-ehci"; + reg = <0x15400300 0x100>; + big-endian; + interrupt-parent = <&periph_intc>; + interrupts = <41>; + status = "disabled"; + }; + + ohci0: usb@15400400 { + compatible = "brcm,bcm3384-ohci", "generic-ohci"; + reg = <0x15400400 0x100>; + big-endian; + no-big-frame-no; + interrupt-parent = <&periph_intc>; + interrupts = <40>; + status = "disabled"; + }; + }; +}; diff --git a/arch/mips/boot/dts/brcm/bcm3384_zephyr.dtsi b/arch/mips/boot/dts/brcm/bcm3384_zephyr.dtsi new file mode 100644 index 000000000000..a7bd8564e9f6 --- /dev/null +++ b/arch/mips/boot/dts/brcm/bcm3384_zephyr.dtsi @@ -0,0 +1,126 @@ +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "brcm,bcm3384", "brcm,bcm33843"; + + memory@0 { + device_type = "memory"; + + /* Typical range. The bootloader should fill this in. */ + reg = <0x0 0x08000000>; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + /* On BMIPS5000 this is 1/8th of the CPU core clock */ + mips-hpt-frequency = <100000000>; + + cpu@0 { + compatible = "brcm,bmips5000"; + device_type = "cpu"; + reg = <0>; + }; + + cpu@1 { + compatible = "brcm,bmips5000"; + device_type = "cpu"; + reg = <1>; + }; + }; + + cpu_intc: cpu_intc { + #address-cells = <0>; + compatible = "mti,cpu-interrupt-controller"; + + interrupt-controller; + #interrupt-cells = <1>; + }; + + clocks { + periph_clk: periph_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <54000000>; + }; + }; + + aliases { + uart0 = &uart0; + }; + + ubus { + #address-cells = <1>; + #size-cells = <1>; + + compatible = "brcm,ubus", "simple-bus"; + ranges; + dma-ranges = <0x00000000 0x08000000 0x08000000>, + <0x08000000 0x00000000 0x08000000>; + + periph_intc: periph_intc@14e00038 { + compatible = "brcm,bcm3380-l2-intc"; + reg = <0x14e00038 0x4 0x14e0003c 0x4>, + <0x14e00340 0x4 0x14e00344 0x4>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&cpu_intc>; + interrupts = <4>; + }; + + zmips_intc: zmips_intc@104b0060 { + compatible = "brcm,bcm3380-l2-intc"; + reg = <0x104b0060 0x4 0x104b0064 0x4>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&periph_intc>; + interrupts = <29>; + brcm,int-map-mask = <0xffffffff>; + }; + + iop_intc: iop_intc@14e00058 { + compatible = "brcm,bcm3380-l2-intc"; + reg = <0x14e00058 0x4 0x14e0005c 0x4>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&cpu_intc>; + interrupts = <6>; + brcm,int-map-mask = <0xffffffff>; + }; + + uart0: serial@14e00520 { + compatible = "brcm,bcm6345-uart"; + reg = <0x14e00520 0x18>; + interrupt-parent = <&periph_intc>; + interrupts = <2>; + clocks = <&periph_clk>; + status = "disabled"; + }; + + ehci0: usb@15400300 { + compatible = "brcm,bcm3384-ehci", "generic-ehci"; + reg = <0x15400300 0x100>; + big-endian; + interrupt-parent = <&periph_intc>; + interrupts = <41>; + status = "disabled"; + }; + + ohci0: usb@15400400 { + compatible = "brcm,bcm3384-ohci", "generic-ohci"; + reg = <0x15400400 0x100>; + big-endian; + no-big-frame-no; + interrupt-parent = <&periph_intc>; + interrupts = <40>; + status = "disabled"; + }; + }; +}; diff --git a/arch/mips/boot/dts/brcm/bcm6328.dtsi b/arch/mips/boot/dts/brcm/bcm6328.dtsi new file mode 100644 index 000000000000..41891c1e58bd --- /dev/null +++ b/arch/mips/boot/dts/brcm/bcm6328.dtsi @@ -0,0 +1,86 @@ +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "brcm,bcm6328"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + mips-hpt-frequency = <160000000>; + + cpu@0 { + compatible = "brcm,bmips4350"; + device_type = "cpu"; + reg = <0>; + }; + + cpu@1 { + compatible = "brcm,bmips4350"; + device_type = "cpu"; + reg = <1>; + }; + }; + + clocks { + periph_clk: periph_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + }; + }; + + aliases { + uart0 = &uart0; + }; + + cpu_intc: cpu_intc { + #address-cells = <0>; + compatible = "mti,cpu-interrupt-controller"; + + interrupt-controller; + #interrupt-cells = <1>; + }; + + ubus { + #address-cells = <1>; + #size-cells = <1>; + + compatible = "simple-bus"; + ranges; + + periph_intc: periph_intc@10000020 { + compatible = "brcm,bcm3380-l2-intc"; + reg = <0x10000024 0x4 0x1000002c 0x4>, + <0x10000020 0x4 0x10000028 0x4>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&cpu_intc>; + interrupts = <2>; + }; + + uart0: serial@10000100 { + compatible = "brcm,bcm6345-uart"; + reg = <0x10000100 0x18>; + interrupt-parent = <&periph_intc>; + interrupts = <28>; + clocks = <&periph_clk>; + status = "disabled"; + }; + + timer: timer@10000040 { + compatible = "syscon"; + reg = <0x10000040 0x2c>; + little-endian; + }; + + reboot { + compatible = "syscon-reboot"; + regmap = <&timer>; + offset = <0x28>; + mask = <0x1>; + }; + }; +}; diff --git a/arch/mips/boot/dts/brcm/bcm6368.dtsi b/arch/mips/boot/dts/brcm/bcm6368.dtsi new file mode 100644 index 000000000000..45152bc22117 --- /dev/null +++ b/arch/mips/boot/dts/brcm/bcm6368.dtsi @@ -0,0 +1,93 @@ +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "brcm,bcm6368"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + mips-hpt-frequency = <200000000>; + + cpu@0 { + compatible = "brcm,bmips4350"; + device_type = "cpu"; + reg = <0>; + }; + + cpu@1 { + compatible = "brcm,bmips4350"; + device_type = "cpu"; + reg = <1>; + }; + + }; + + clocks { + periph_clk: periph_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + }; + }; + + aliases { + uart0 = &uart0; + }; + + cpu_intc: cpu_intc { + #address-cells = <0>; + compatible = "mti,cpu-interrupt-controller"; + + interrupt-controller; + #interrupt-cells = <1>; + }; + + ubus { + #address-cells = <1>; + #size-cells = <1>; + + compatible = "simple-bus"; + ranges; + + periph_intc: periph_intc@10000020 { + compatible = "brcm,bcm3380-l2-intc"; + reg = <0x10000024 0x4 0x1000002c 0x4>, + <0x10000020 0x4 0x10000028 0x4>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&cpu_intc>; + interrupts = <2>; + }; + + uart0: serial@10000100 { + compatible = "brcm,bcm6345-uart"; + reg = <0x10000100 0x18>; + interrupt-parent = <&periph_intc>; + interrupts = <2>; + clocks = <&periph_clk>; + status = "disabled"; + }; + + ehci0: usb@10001500 { + compatible = "brcm,bcm6368-ehci", "generic-ehci"; + reg = <0x10001500 0x100>; + big-endian; + interrupt-parent = <&periph_intc>; + interrupts = <7>; + status = "disabled"; + }; + + ohci0: usb@10001600 { + compatible = "brcm,bcm6368-ohci", "generic-ohci"; + reg = <0x10001600 0x100>; + big-endian; + no-big-frame-no; + interrupt-parent = <&periph_intc>; + interrupts = <5>; + status = "disabled"; + }; + }; +}; diff --git a/arch/mips/boot/dts/brcm/bcm7125.dtsi b/arch/mips/boot/dts/brcm/bcm7125.dtsi new file mode 100644 index 000000000000..1a7efa883c5e --- /dev/null +++ b/arch/mips/boot/dts/brcm/bcm7125.dtsi @@ -0,0 +1,139 @@ +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "brcm,bcm7125"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + mips-hpt-frequency = <202500000>; + + cpu@0 { + compatible = "brcm,bmips4380"; + device_type = "cpu"; + reg = <0>; + }; + + cpu@1 { + compatible = "brcm,bmips4380"; + device_type = "cpu"; + reg = <1>; + }; + }; + + aliases { + uart0 = &uart0; + }; + + cpu_intc: cpu_intc { + #address-cells = <0>; + compatible = "mti,cpu-interrupt-controller"; + + interrupt-controller; + #interrupt-cells = <1>; + }; + + clocks { + uart_clk: uart_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <81000000>; + }; + }; + + rdb { + #address-cells = <1>; + #size-cells = <1>; + + compatible = "simple-bus"; + ranges = <0 0x10000000 0x01000000>; + + periph_intc: periph_intc@441400 { + compatible = "brcm,bcm7038-l1-intc"; + reg = <0x441400 0x30>, <0x441600 0x30>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&cpu_intc>; + interrupts = <2>, <3>; + }; + + sun_l2_intc: sun_l2_intc@401800 { + compatible = "brcm,l2-intc"; + reg = <0x401800 0x30>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&periph_intc>; + interrupts = <23>; + }; + + gisb-arb@400000 { + compatible = "brcm,bcm7400-gisb-arb"; + reg = <0x400000 0xdc>; + native-endian; + interrupt-parent = <&sun_l2_intc>; + interrupts = <0>, <2>; + brcm,gisb-arb-master-mask = <0x2f7>; + brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "pci_0", + "bsp_0", "rdc_0", "rptd_0", + "avd_0", "jtag_0"; + }; + + upg_irq0_intc: upg_irq0_intc@406780 { + compatible = "brcm,bcm7120-l2-intc"; + reg = <0x406780 0x8>; + + brcm,int-map-mask = <0x44>; + brcm,int-fwd-mask = <0x70000>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&periph_intc>; + interrupts = <18>; + }; + + sun_top_ctrl: syscon@404000 { + compatible = "brcm,bcm7125-sun-top-ctrl", "syscon"; + reg = <0x404000 0x60c>; + little-endian; + }; + + reboot { + compatible = "brcm,bcm7038-reboot"; + syscon = <&sun_top_ctrl 0x8 0x14>; + }; + + uart0: serial@406b00 { + compatible = "ns16550a"; + reg = <0x406b00 0x20>; + reg-io-width = <0x4>; + reg-shift = <0x2>; + native-endian; + interrupt-parent = <&periph_intc>; + interrupts = <21>; + clocks = <&uart_clk>; + status = "disabled"; + }; + + ehci0: usb@488300 { + compatible = "brcm,bcm7125-ehci", "generic-ehci"; + reg = <0x488300 0x100>; + native-endian; + interrupt-parent = <&periph_intc>; + interrupts = <60>; + status = "disabled"; + }; + + ohci0: usb@488400 { + compatible = "brcm,bcm7125-ohci", "generic-ohci"; + reg = <0x488400 0x100>; + native-endian; + interrupt-parent = <&periph_intc>; + interrupts = <61>; + status = "disabled"; + }; + }; +}; diff --git a/arch/mips/boot/dts/brcm/bcm7346.dtsi b/arch/mips/boot/dts/brcm/bcm7346.dtsi new file mode 100644 index 000000000000..1f30728a3177 --- /dev/null +++ b/arch/mips/boot/dts/brcm/bcm7346.dtsi @@ -0,0 +1,224 @@ +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "brcm,bcm7346"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + mips-hpt-frequency = <163125000>; + + cpu@0 { + compatible = "brcm,bmips5000"; + device_type = "cpu"; + reg = <0>; + }; + + cpu@1 { + compatible = "brcm,bmips5000"; + device_type = "cpu"; + reg = <1>; + }; + }; + + aliases { + uart0 = &uart0; + }; + + cpu_intc: cpu_intc { + #address-cells = <0>; + compatible = "mti,cpu-interrupt-controller"; + + interrupt-controller; + #interrupt-cells = <1>; + }; + + clocks { + uart_clk: uart_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <81000000>; + }; + }; + + rdb { + #address-cells = <1>; + #size-cells = <1>; + + compatible = "simple-bus"; + ranges = <0 0x10000000 0x01000000>; + + periph_intc: periph_intc@411400 { + compatible = "brcm,bcm7038-l1-intc"; + reg = <0x411400 0x30>, <0x411600 0x30>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&cpu_intc>; + interrupts = <2>, <3>; + }; + + sun_l2_intc: sun_l2_intc@403000 { + compatible = "brcm,l2-intc"; + reg = <0x403000 0x30>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&periph_intc>; + interrupts = <51>; + }; + + gisb-arb@400000 { + compatible = "brcm,bcm7400-gisb-arb"; + reg = <0x400000 0xdc>; + native-endian; + interrupt-parent = <&sun_l2_intc>; + interrupts = <0>, <2>; + brcm,gisb-arb-master-mask = <0x673>; + brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "bsp_0", + "rdc_0", "raaga_0", + "jtag_0", "svd_0"; + }; + + upg_irq0_intc: upg_irq0_intc@406780 { + compatible = "brcm,bcm7120-l2-intc"; + reg = <0x406780 0x8>; + + brcm,int-map-mask = <0x44>; + brcm,int-fwd-mask = <0x70000>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&periph_intc>; + interrupts = <59>; + }; + + sun_top_ctrl: syscon@404000 { + compatible = "brcm,bcm7346-sun-top-ctrl", "syscon"; + reg = <0x404000 0x51c>; + little-endian; + }; + + reboot { + compatible = "brcm,brcmstb-reboot"; + syscon = <&sun_top_ctrl 0x304 0x308>; + }; + + uart0: serial@406900 { + compatible = "ns16550a"; + reg = <0x406900 0x20>; + reg-io-width = <0x4>; + reg-shift = <0x2>; + native-endian; + interrupt-parent = <&periph_intc>; + interrupts = <64>; + clocks = <&uart_clk>; + status = "disabled"; + }; + + enet0: ethernet@430000 { + phy-mode = "internal"; + phy-handle = <&phy1>; + mac-address = [ 00 10 18 36 23 1a ]; + compatible = "brcm,genet-v2"; + #address-cells = <0x1>; + #size-cells = <0x1>; + reg = <0x430000 0x4c8c>; + interrupts = <24>, <25>; + interrupt-parent = <&periph_intc>; + status = "disabled"; + + mdio@e14 { + compatible = "brcm,genet-mdio-v2"; + #address-cells = <0x1>; + #size-cells = <0x0>; + reg = <0xe14 0x8>; + + phy1: ethernet-phy@1 { + max-speed = <100>; + reg = <0x1>; + compatible = "brcm,40nm-ephy", + "ethernet-phy-ieee802.3-c22"; + }; + }; + }; + + ehci0: usb@480300 { + compatible = "brcm,bcm7346-ehci", "generic-ehci"; + reg = <0x480300 0x100>; + native-endian; + interrupt-parent = <&periph_intc>; + interrupts = <68>; + status = "disabled"; + }; + + ohci0: usb@480400 { + compatible = "brcm,bcm7346-ohci", "generic-ohci"; + reg = <0x480400 0x100>; + native-endian; + no-big-frame-no; + interrupt-parent = <&periph_intc>; + interrupts = <70>; + status = "disabled"; + }; + + ehci1: usb@480500 { + compatible = "brcm,bcm7346-ehci", "generic-ehci"; + reg = <0x480500 0x100>; + native-endian; + interrupt-parent = <&periph_intc>; + interrupts = <69>; + status = "disabled"; + }; + + ohci1: usb@480600 { + compatible = "brcm,bcm7346-ohci", "generic-ohci"; + reg = <0x480600 0x100>; + native-endian; + no-big-frame-no; + interrupt-parent = <&periph_intc>; + interrupts = <71>; + status = "disabled"; + }; + + ehci2: usb@490300 { + compatible = "brcm,bcm7346-ehci", "generic-ehci"; + reg = <0x490300 0x100>; + native-endian; + interrupt-parent = <&periph_intc>; + interrupts = <73>; + status = "disabled"; + }; + + ohci2: usb@490400 { + compatible = "brcm,bcm7346-ohci", "generic-ohci"; + reg = <0x490400 0x100>; + native-endian; + no-big-frame-no; + interrupt-parent = <&periph_intc>; + interrupts = <75>; + status = "disabled"; + }; + + ehci3: usb@490500 { + compatible = "brcm,bcm7346-ehci", "generic-ehci"; + reg = <0x490500 0x100>; + native-endian; + interrupt-parent = <&periph_intc>; + interrupts = <74>; + status = "disabled"; + }; + + ohci3: usb@490600 { + compatible = "brcm,bcm7346-ohci", "generic-ohci"; + reg = <0x490600 0x100>; + native-endian; + no-big-frame-no; + interrupt-parent = <&periph_intc>; + interrupts = <76>; + status = "disabled"; + }; + }; +}; diff --git a/arch/mips/boot/dts/brcm/bcm7358.dtsi b/arch/mips/boot/dts/brcm/bcm7358.dtsi new file mode 100644 index 000000000000..2c2aa9368f76 --- /dev/null +++ b/arch/mips/boot/dts/brcm/bcm7358.dtsi @@ -0,0 +1,161 @@ +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "brcm,bcm7358"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + mips-hpt-frequency = <375000000>; + + cpu@0 { + compatible = "brcm,bmips3300"; + device_type = "cpu"; + reg = <0>; + }; + }; + + aliases { + uart0 = &uart0; + }; + + cpu_intc: cpu_intc { + #address-cells = <0>; + compatible = "mti,cpu-interrupt-controller"; + + interrupt-controller; + #interrupt-cells = <1>; + }; + + clocks { + uart_clk: uart_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <81000000>; + }; + }; + + rdb { + #address-cells = <1>; + #size-cells = <1>; + + compatible = "simple-bus"; + ranges = <0 0x10000000 0x01000000>; + + periph_intc: periph_intc@411400 { + compatible = "brcm,bcm7038-l1-intc"; + reg = <0x411400 0x30>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&cpu_intc>; + interrupts = <2>; + }; + + sun_l2_intc: sun_l2_intc@403000 { + compatible = "brcm,l2-intc"; + reg = <0x403000 0x30>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&periph_intc>; + interrupts = <48>; + }; + + gisb-arb@400000 { + compatible = "brcm,bcm7400-gisb-arb"; + reg = <0x400000 0xdc>; + native-endian; + interrupt-parent = <&sun_l2_intc>; + interrupts = <0>, <2>; + brcm,gisb-arb-master-mask = <0x2f3>; + brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "bsp_0", + "rdc_0", "raaga_0", + "avd_0", "jtag_0"; + }; + + upg_irq0_intc: upg_irq0_intc@406600 { + compatible = "brcm,bcm7120-l2-intc"; + reg = <0x406600 0x8>; + + brcm,int-map-mask = <0x44>; + brcm,int-fwd-mask = <0x70000>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&periph_intc>; + interrupts = <56>; + }; + + sun_top_ctrl: syscon@404000 { + compatible = "brcm,bcm7358-sun-top-ctrl", "syscon"; + reg = <0x404000 0x51c>; + little-endian; + }; + + reboot { + compatible = "brcm,brcmstb-reboot"; + syscon = <&sun_top_ctrl 0x304 0x308>; + }; + + uart0: serial@406800 { + compatible = "ns16550a"; + reg = <0x406800 0x20>; + reg-io-width = <0x4>; + reg-shift = <0x2>; + native-endian; + interrupt-parent = <&periph_intc>; + interrupts = <61>; + clocks = <&uart_clk>; + status = "disabled"; + }; + + enet0: ethernet@430000 { + phy-mode = "internal"; + phy-handle = <&phy1>; + mac-address = [ 00 10 18 36 23 1a ]; + compatible = "brcm,genet-v2"; + #address-cells = <0x1>; + #size-cells = <0x1>; + reg = <0x430000 0x4c8c>; + interrupts = <24>, <25>; + interrupt-parent = <&periph_intc>; + status = "disabled"; + + mdio@e14 { + compatible = "brcm,genet-mdio-v2"; + #address-cells = <0x1>; + #size-cells = <0x0>; + reg = <0xe14 0x8>; + + phy1: ethernet-phy@1 { + max-speed = <100>; + reg = <0x1>; + compatible = "brcm,40nm-ephy", + "ethernet-phy-ieee802.3-c22"; + }; + }; + }; + + ehci0: usb@480300 { + compatible = "brcm,bcm7358-ehci", "generic-ehci"; + reg = <0x480300 0x100>; + native-endian; + interrupt-parent = <&periph_intc>; + interrupts = <65>; + status = "disabled"; + }; + + ohci0: usb@480400 { + compatible = "brcm,bcm7358-ohci", "generic-ohci"; + reg = <0x480400 0x100>; + native-endian; + no-big-frame-no; + interrupt-parent = <&periph_intc>; + interrupts = <66>; + status = "disabled"; + }; + }; +}; diff --git a/arch/mips/boot/dts/brcm/bcm7360.dtsi b/arch/mips/boot/dts/brcm/bcm7360.dtsi new file mode 100644 index 000000000000..f23b0aed276f --- /dev/null +++ b/arch/mips/boot/dts/brcm/bcm7360.dtsi @@ -0,0 +1,161 @@ +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "brcm,bcm7360"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + mips-hpt-frequency = <375000000>; + + cpu@0 { + compatible = "brcm,bmips3300"; + device_type = "cpu"; + reg = <0>; + }; + }; + + aliases { + uart0 = &uart0; + }; + + cpu_intc: cpu_intc { + #address-cells = <0>; + compatible = "mti,cpu-interrupt-controller"; + + interrupt-controller; + #interrupt-cells = <1>; + }; + + clocks { + uart_clk: uart_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <81000000>; + }; + }; + + rdb { + #address-cells = <1>; + #size-cells = <1>; + + compatible = "simple-bus"; + ranges = <0 0x10000000 0x01000000>; + + periph_intc: periph_intc@411400 { + compatible = "brcm,bcm7038-l1-intc"; + reg = <0x411400 0x30>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&cpu_intc>; + interrupts = <2>; + }; + + sun_l2_intc: sun_l2_intc@403000 { + compatible = "brcm,l2-intc"; + reg = <0x403000 0x30>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&periph_intc>; + interrupts = <48>; + }; + + gisb-arb@400000 { + compatible = "brcm,bcm7400-gisb-arb"; + reg = <0x400000 0xdc>; + native-endian; + interrupt-parent = <&sun_l2_intc>; + interrupts = <0>, <2>; + brcm,gisb-arb-master-mask = <0x2f3>; + brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "bsp_0", + "rdc_0", "raaga_0", + "avd_0", "jtag_0"; + }; + + upg_irq0_intc: upg_irq0_intc@406600 { + compatible = "brcm,bcm7120-l2-intc"; + reg = <0x406600 0x8>; + + brcm,int-map-mask = <0x44>; + brcm,int-fwd-mask = <0x70000>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&periph_intc>; + interrupts = <56>; + }; + + sun_top_ctrl: syscon@404000 { + compatible = "brcm,bcm7360-sun-top-ctrl", "syscon"; + reg = <0x404000 0x51c>; + little-endian; + }; + + reboot { + compatible = "brcm,brcmstb-reboot"; + syscon = <&sun_top_ctrl 0x304 0x308>; + }; + + uart0: serial@406800 { + compatible = "ns16550a"; + reg = <0x406800 0x20>; + reg-io-width = <0x4>; + reg-shift = <0x2>; + native-endian; + interrupt-parent = <&periph_intc>; + interrupts = <61>; + clocks = <&uart_clk>; + status = "disabled"; + }; + + enet0: ethernet@430000 { + phy-mode = "internal"; + phy-handle = <&phy1>; + mac-address = [ 00 10 18 36 23 1a ]; + compatible = "brcm,genet-v2"; + #address-cells = <0x1>; + #size-cells = <0x1>; + reg = <0x430000 0x4c8c>; + interrupts = <24>, <25>; + interrupt-parent = <&periph_intc>; + status = "disabled"; + + mdio@e14 { + compatible = "brcm,genet-mdio-v2"; + #address-cells = <0x1>; + #size-cells = <0x0>; + reg = <0xe14 0x8>; + + phy1: ethernet-phy@1 { + max-speed = <100>; + reg = <0x1>; + compatible = "brcm,40nm-ephy", + "ethernet-phy-ieee802.3-c22"; + }; + }; + }; + + ehci0: usb@480300 { + compatible = "brcm,bcm7360-ehci", "generic-ehci"; + reg = <0x480300 0x100>; + native-endian; + interrupt-parent = <&periph_intc>; + interrupts = <65>; + status = "disabled"; + }; + + ohci0: usb@480400 { + compatible = "brcm,bcm7360-ohci", "generic-ohci"; + reg = <0x480400 0x100>; + native-endian; + no-big-frame-no; + interrupt-parent = <&periph_intc>; + interrupts = <66>; + status = "disabled"; + }; + }; +}; diff --git a/arch/mips/boot/dts/brcm/bcm7362.dtsi b/arch/mips/boot/dts/brcm/bcm7362.dtsi new file mode 100644 index 000000000000..da99db665bbc --- /dev/null +++ b/arch/mips/boot/dts/brcm/bcm7362.dtsi @@ -0,0 +1,167 @@ +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "brcm,bcm7362"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + mips-hpt-frequency = <375000000>; + + cpu@0 { + compatible = "brcm,bmips4380"; + device_type = "cpu"; + reg = <0>; + }; + + cpu@1 { + compatible = "brcm,bmips4380"; + device_type = "cpu"; + reg = <1>; + }; + }; + + aliases { + uart0 = &uart0; + }; + + cpu_intc: cpu_intc { + #address-cells = <0>; + compatible = "mti,cpu-interrupt-controller"; + + interrupt-controller; + #interrupt-cells = <1>; + }; + + clocks { + uart_clk: uart_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <81000000>; + }; + }; + + rdb { + #address-cells = <1>; + #size-cells = <1>; + + compatible = "simple-bus"; + ranges = <0 0x10000000 0x01000000>; + + periph_intc: periph_intc@411400 { + compatible = "brcm,bcm7038-l1-intc"; + reg = <0x411400 0x30>, <0x411600 0x30>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&cpu_intc>; + interrupts = <2>, <3>; + }; + + sun_l2_intc: sun_l2_intc@403000 { + compatible = "brcm,l2-intc"; + reg = <0x403000 0x30>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&periph_intc>; + interrupts = <48>; + }; + + gisb-arb@400000 { + compatible = "brcm,bcm7400-gisb-arb"; + reg = <0x400000 0xdc>; + native-endian; + interrupt-parent = <&sun_l2_intc>; + interrupts = <0>, <2>; + brcm,gisb-arb-master-mask = <0x2f3>; + brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "bsp_0", + "rdc_0", "raaga_0", + "avd_0", "jtag_0"; + }; + + upg_irq0_intc: upg_irq0_intc@406600 { + compatible = "brcm,bcm7120-l2-intc"; + reg = <0x406600 0x8>; + + brcm,int-map-mask = <0x44>; + brcm,int-fwd-mask = <0x70000>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&periph_intc>; + interrupts = <56>; + }; + + sun_top_ctrl: syscon@404000 { + compatible = "brcm,bcm7362-sun-top-ctrl", "syscon"; + reg = <0x404000 0x51c>; + little-endian; + }; + + reboot { + compatible = "brcm,brcmstb-reboot"; + syscon = <&sun_top_ctrl 0x304 0x308>; + }; + + uart0: serial@406800 { + compatible = "ns16550a"; + reg = <0x406800 0x20>; + reg-io-width = <0x4>; + reg-shift = <0x2>; + native-endian; + interrupt-parent = <&periph_intc>; + interrupts = <61>; + clocks = <&uart_clk>; + status = "disabled"; + }; + + enet0: ethernet@430000 { + phy-mode = "internal"; + phy-handle = <&phy1>; + mac-address = [ 00 10 18 36 23 1a ]; + compatible = "brcm,genet-v2"; + #address-cells = <0x1>; + #size-cells = <0x1>; + reg = <0x430000 0x4c8c>; + interrupts = <24>, <25>; + interrupt-parent = <&periph_intc>; + status = "disabled"; + + mdio@e14 { + compatible = "brcm,genet-mdio-v2"; + #address-cells = <0x1>; + #size-cells = <0x0>; + reg = <0xe14 0x8>; + + phy1: ethernet-phy@1 { + max-speed = <100>; + reg = <0x1>; + compatible = "brcm,40nm-ephy", + "ethernet-phy-ieee802.3-c22"; + }; + }; + }; + + ehci0: usb@480300 { + compatible = "brcm,bcm7362-ehci", "generic-ehci"; + reg = <0x480300 0x100>; + native-endian; + interrupt-parent = <&periph_intc>; + interrupts = <65>; + status = "disabled"; + }; + + ohci0: usb@480400 { + compatible = "brcm,bcm7362-ohci", "generic-ohci"; + reg = <0x480400 0x100>; + native-endian; + no-big-frame-no; + interrupt-parent = <&periph_intc>; + interrupts = <66>; + status = "disabled"; + }; + }; +}; diff --git a/arch/mips/boot/dts/brcm/bcm7420.dtsi b/arch/mips/boot/dts/brcm/bcm7420.dtsi new file mode 100644 index 000000000000..5f55d0a50a28 --- /dev/null +++ b/arch/mips/boot/dts/brcm/bcm7420.dtsi @@ -0,0 +1,184 @@ +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "brcm,bcm7420"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + mips-hpt-frequency = <93750000>; + + cpu@0 { + compatible = "brcm,bmips5000"; + device_type = "cpu"; + reg = <0>; + }; + + cpu@1 { + compatible = "brcm,bmips5000"; + device_type = "cpu"; + reg = <1>; + }; + }; + + aliases { + uart0 = &uart0; + }; + + cpu_intc: cpu_intc { + #address-cells = <0>; + compatible = "mti,cpu-interrupt-controller"; + + interrupt-controller; + #interrupt-cells = <1>; + }; + + clocks { + uart_clk: uart_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <81000000>; + }; + }; + + rdb { + #address-cells = <1>; + #size-cells = <1>; + + compatible = "simple-bus"; + ranges = <0 0x10000000 0x01000000>; + + periph_intc: periph_intc@441400 { + compatible = "brcm,bcm7038-l1-intc"; + reg = <0x441400 0x30>, <0x441600 0x30>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&cpu_intc>; + interrupts = <2>, <3>; + }; + + sun_l2_intc: sun_l2_intc@401800 { + compatible = "brcm,l2-intc"; + reg = <0x401800 0x30>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&periph_intc>; + interrupts = <23>; + }; + + gisb-arb@400000 { + compatible = "brcm,bcm7400-gisb-arb"; + reg = <0x400000 0xdc>; + native-endian; + interrupt-parent = <&sun_l2_intc>; + interrupts = <0>, <2>; + brcm,gisb-arb-master-mask = <0x3ff>; + brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "pci_0", + "pcie_0", "bsp_0", "rdc_0", + "rptd_0", "avd_0", "avd_1", + "jtag_0"; + }; + + upg_irq0_intc: upg_irq0_intc@406780 { + compatible = "brcm,bcm7120-l2-intc"; + reg = <0x406780 0x8>; + + brcm,int-map-mask = <0x44>; + brcm,int-fwd-mask = <0x70000>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&periph_intc>; + interrupts = <18>; + }; + + sun_top_ctrl: syscon@404000 { + compatible = "brcm,bcm7420-sun-top-ctrl", "syscon"; + reg = <0x404000 0x60c>; + little-endian; + }; + + reboot { + compatible = "brcm,bcm7038-reboot"; + syscon = <&sun_top_ctrl 0x8 0x14>; + }; + + uart0: serial@406b00 { + compatible = "ns16550a"; + reg = <0x406b00 0x20>; + reg-io-width = <0x4>; + reg-shift = <0x2>; + interrupt-parent = <&periph_intc>; + interrupts = <21>; + clocks = <&uart_clk>; + status = "disabled"; + }; + + enet0: ethernet@468000 { + phy-mode = "internal"; + phy-handle = <&phy1>; + mac-address = [ 00 10 18 36 23 1a ]; + compatible = "brcm,genet-v1"; + #address-cells = <0x1>; + #size-cells = <0x1>; + reg = <0x468000 0x3c8c>; + interrupts = <69>, <79>; + interrupt-parent = <&periph_intc>; + status = "disabled"; + + mdio@e14 { + compatible = "brcm,genet-mdio-v1"; + #address-cells = <0x1>; + #size-cells = <0x0>; + reg = <0xe14 0x8>; + + phy1: ethernet-phy@1 { + max-speed = <100>; + reg = <0x1>; + compatible = "brcm,65nm-ephy", + "ethernet-phy-ieee802.3-c22"; + }; + }; + }; + + ehci0: usb@488300 { + compatible = "brcm,bcm7420-ehci", "generic-ehci"; + reg = <0x488300 0x100>; + interrupt-parent = <&periph_intc>; + interrupts = <60>; + status = "disabled"; + }; + + ohci0: usb@488400 { + compatible = "brcm,bcm7420-ohci", "generic-ohci"; + reg = <0x488400 0x100>; + native-endian; + no-big-frame-no; + interrupt-parent = <&periph_intc>; + interrupts = <61>; + status = "disabled"; + }; + + ehci1: usb@488500 { + compatible = "brcm,bcm7420-ehci", "generic-ehci"; + reg = <0x488500 0x100>; + interrupt-parent = <&periph_intc>; + interrupts = <55>; + status = "disabled"; + }; + + ohci1: usb@488600 { + compatible = "brcm,bcm7420-ohci", "generic-ohci"; + reg = <0x488600 0x100>; + native-endian; + no-big-frame-no; + interrupt-parent = <&periph_intc>; + interrupts = <62>; + status = "disabled"; + }; + }; +}; diff --git a/arch/mips/boot/dts/brcm/bcm7425.dtsi b/arch/mips/boot/dts/brcm/bcm7425.dtsi new file mode 100644 index 000000000000..5b660b617ead --- /dev/null +++ b/arch/mips/boot/dts/brcm/bcm7425.dtsi @@ -0,0 +1,225 @@ +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "brcm,bcm7425"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + mips-hpt-frequency = <163125000>; + + cpu@0 { + compatible = "brcm,bmips5000"; + device_type = "cpu"; + reg = <0>; + }; + + cpu@1 { + compatible = "brcm,bmips5000"; + device_type = "cpu"; + reg = <1>; + }; + }; + + aliases { + uart0 = &uart0; + }; + + cpu_intc: cpu_intc { + #address-cells = <0>; + compatible = "mti,cpu-interrupt-controller"; + + interrupt-controller; + #interrupt-cells = <1>; + }; + + clocks { + uart_clk: uart_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <81000000>; + }; + }; + + rdb { + #address-cells = <1>; + #size-cells = <1>; + + compatible = "simple-bus"; + ranges = <0 0x10000000 0x01000000>; + + periph_intc: periph_intc@41a400 { + compatible = "brcm,bcm7038-l1-intc"; + reg = <0x41a400 0x30>, <0x41a600 0x30>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&cpu_intc>; + interrupts = <2>, <3>; + }; + + sun_l2_intc: sun_l2_intc@403000 { + compatible = "brcm,l2-intc"; + reg = <0x403000 0x30>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&periph_intc>; + interrupts = <47>; + }; + + gisb-arb@400000 { + compatible = "brcm,bcm7400-gisb-arb"; + reg = <0x400000 0xdc>; + native-endian; + interrupt-parent = <&sun_l2_intc>; + interrupts = <0>, <2>; + brcm,gisb-arb-master-mask = <0x177b>; + brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "pcie_0", + "bsp_0", "rdc_0", + "raaga_0", "avd_1", + "jtag_0", "svd_0", + "vice_0"; + }; + + upg_irq0_intc: upg_irq0_intc@406780 { + compatible = "brcm,bcm7120-l2-intc"; + reg = <0x406780 0x8>; + + brcm,int-map-mask = <0x44>; + brcm,int-fwd-mask = <0x70000>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&periph_intc>; + interrupts = <55>; + }; + + sun_top_ctrl: syscon@404000 { + compatible = "brcm,bcm7425-sun-top-ctrl", "syscon"; + reg = <0x404000 0x51c>; + little-endian; + }; + + reboot { + compatible = "brcm,brcmstb-reboot"; + syscon = <&sun_top_ctrl 0x304 0x308>; + }; + + uart0: serial@406b00 { + compatible = "ns16550a"; + reg = <0x406b00 0x20>; + reg-io-width = <0x4>; + reg-shift = <0x2>; + interrupt-parent = <&periph_intc>; + interrupts = <61>; + clocks = <&uart_clk>; + status = "disabled"; + }; + + enet0: ethernet@b80000 { + phy-mode = "internal"; + phy-handle = <&phy1>; + mac-address = [ 00 10 18 36 23 1a ]; + compatible = "brcm,genet-v3"; + #address-cells = <0x1>; + #size-cells = <0x1>; + reg = <0xb80000 0x11c88>; + interrupts = <17>, <18>; + interrupt-parent = <&periph_intc>; + status = "disabled"; + + mdio@e14 { + compatible = "brcm,genet-mdio-v3"; + #address-cells = <0x1>; + #size-cells = <0x0>; + reg = <0xe14 0x8>; + + phy1: ethernet-phy@1 { + max-speed = <100>; + reg = <0x1>; + compatible = "brcm,40nm-ephy", + "ethernet-phy-ieee802.3-c22"; + }; + }; + }; + + ehci0: usb@480300 { + compatible = "brcm,bcm7425-ehci", "generic-ehci"; + reg = <0x480300 0x100>; + native-endian; + interrupt-parent = <&periph_intc>; + interrupts = <65>; + status = "disabled"; + }; + + ohci0: usb@480400 { + compatible = "brcm,bcm7425-ohci", "generic-ohci"; + reg = <0x480400 0x100>; + native-endian; + no-big-frame-no; + interrupt-parent = <&periph_intc>; + interrupts = <67>; + status = "disabled"; + }; + + ehci1: usb@480500 { + compatible = "brcm,bcm7425-ehci", "generic-ehci"; + reg = <0x480500 0x100>; + native-endian; + interrupt-parent = <&periph_intc>; + interrupts = <66>; + status = "disabled"; + }; + + ohci1: usb@480600 { + compatible = "brcm,bcm7425-ohci", "generic-ohci"; + reg = <0x480600 0x100>; + native-endian; + no-big-frame-no; + interrupt-parent = <&periph_intc>; + interrupts = <68>; + status = "disabled"; + }; + + ehci2: usb@490300 { + compatible = "brcm,bcm7425-ehci", "generic-ehci"; + reg = <0x490300 0x100>; + native-endian; + interrupt-parent = <&periph_intc>; + interrupts = <70>; + status = "disabled"; + }; + + ohci2: usb@490400 { + compatible = "brcm,bcm7425-ohci", "generic-ohci"; + reg = <0x490400 0x100>; + native-endian; + no-big-frame-no; + interrupt-parent = <&periph_intc>; + interrupts = <72>; + status = "disabled"; + }; + + ehci3: usb@490500 { + compatible = "brcm,bcm7425-ehci", "generic-ehci"; + reg = <0x490500 0x100>; + native-endian; + interrupt-parent = <&periph_intc>; + interrupts = <71>; + status = "disabled"; + }; + + ohci3: usb@490600 { + compatible = "brcm,bcm7425-ohci", "generic-ohci"; + reg = <0x490600 0x100>; + native-endian; + no-big-frame-no; + interrupt-parent = <&periph_intc>; + interrupts = <73>; + status = "disabled"; + }; + }; +}; diff --git a/arch/mips/boot/dts/bcm93384wvg.dts b/arch/mips/boot/dts/brcm/bcm93384wvg.dts index 831741179212..d1e44a17d41a 100644 --- a/arch/mips/boot/dts/bcm93384wvg.dts +++ b/arch/mips/boot/dts/brcm/bcm93384wvg.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "bcm3384.dtsi" +/include/ "bcm3384_zephyr.dtsi" / { compatible = "brcm,bcm93384wvg", "brcm,bcm3384"; @@ -10,13 +10,6 @@ bootargs = "console=ttyS0,115200"; stdout-path = &uart0; }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x04000000>; - dma-xor-mask = <0x08000000>; - dma-xor-limit = <0x0fffffff>; - }; }; &uart0 { diff --git a/arch/mips/boot/dts/brcm/bcm93384wvg_viper.dts b/arch/mips/boot/dts/brcm/bcm93384wvg_viper.dts new file mode 100644 index 000000000000..1ecb2696aca8 --- /dev/null +++ b/arch/mips/boot/dts/brcm/bcm93384wvg_viper.dts @@ -0,0 +1,25 @@ +/dts-v1/; + +/include/ "bcm3384_viper.dtsi" + +/ { + compatible = "brcm,bcm93384wvg-viper", "brcm,bcm3384-viper"; + model = "Broadcom BCM93384WVG-viper"; + + chosen { + bootargs = "console=ttyS0,115200"; + stdout-path = &uart0; + }; +}; + +&uart0 { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; diff --git a/arch/mips/boot/dts/brcm/bcm96368mvwg.dts b/arch/mips/boot/dts/brcm/bcm96368mvwg.dts new file mode 100644 index 000000000000..0e890c28fe5c --- /dev/null +++ b/arch/mips/boot/dts/brcm/bcm96368mvwg.dts @@ -0,0 +1,31 @@ +/dts-v1/; + +/include/ "bcm6368.dtsi" + +/ { + compatible = "brcm,bcm96368mvwg", "brcm,bcm6368"; + model = "Broadcom BCM96368MVWG"; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x04000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + stdout-path = &uart0; + }; +}; + +&uart0 { + status = "okay"; +}; + +/* FIXME: need to set up USB_CTRL registers first */ +&ehci0 { + status = "disabled"; +}; + +&ohci0 { + status = "disabled"; +}; diff --git a/arch/mips/boot/dts/brcm/bcm97125cbmb.dts b/arch/mips/boot/dts/brcm/bcm97125cbmb.dts new file mode 100644 index 000000000000..e046b1109eab --- /dev/null +++ b/arch/mips/boot/dts/brcm/bcm97125cbmb.dts @@ -0,0 +1,31 @@ +/dts-v1/; + +/include/ "bcm7125.dtsi" + +/ { + compatible = "brcm,bcm97125cbmb", "brcm,bcm7125"; + model = "Broadcom BCM97125CBMB"; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + stdout-path = &uart0; + }; +}; + +&uart0 { + status = "okay"; +}; + +/* FIXME: USB is wonky; disable it for now */ +&ehci0 { + status = "disabled"; +}; + +&ohci0 { + status = "disabled"; +}; diff --git a/arch/mips/boot/dts/brcm/bcm97346dbsmb.dts b/arch/mips/boot/dts/brcm/bcm97346dbsmb.dts new file mode 100644 index 000000000000..70f196d89d26 --- /dev/null +++ b/arch/mips/boot/dts/brcm/bcm97346dbsmb.dts @@ -0,0 +1,58 @@ +/dts-v1/; + +/include/ "bcm7346.dtsi" + +/ { + compatible = "brcm,bcm97346dbsmb", "brcm,bcm7346"; + model = "Broadcom BCM97346DBSMB"; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x10000000>, <0x20000000 0x30000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + stdout-path = &uart0; + }; +}; + +&uart0 { + status = "okay"; +}; + +&enet0 { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&ehci2 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; + +&ehci3 { + status = "okay"; +}; + +&ohci3 { + status = "okay"; +}; diff --git a/arch/mips/boot/dts/brcm/bcm97358svmb.dts b/arch/mips/boot/dts/brcm/bcm97358svmb.dts new file mode 100644 index 000000000000..d18e6d947739 --- /dev/null +++ b/arch/mips/boot/dts/brcm/bcm97358svmb.dts @@ -0,0 +1,34 @@ +/dts-v1/; + +/include/ "bcm7358.dtsi" + +/ { + compatible = "brcm,bcm97358svmb", "brcm,bcm7358"; + model = "Broadcom BCM97358SVMB"; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + stdout-path = &uart0; + }; +}; + +&uart0 { + status = "okay"; +}; + +&enet0 { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; diff --git a/arch/mips/boot/dts/brcm/bcm97360svmb.dts b/arch/mips/boot/dts/brcm/bcm97360svmb.dts new file mode 100644 index 000000000000..4fe515500102 --- /dev/null +++ b/arch/mips/boot/dts/brcm/bcm97360svmb.dts @@ -0,0 +1,34 @@ +/dts-v1/; + +/include/ "bcm7360.dtsi" + +/ { + compatible = "brcm,bcm97360svmb", "brcm,bcm7360"; + model = "Broadcom BCM97360SVMB"; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + stdout-path = &uart0; + }; +}; + +&uart0 { + status = "okay"; +}; + +&enet0 { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; diff --git a/arch/mips/boot/dts/brcm/bcm97362svmb.dts b/arch/mips/boot/dts/brcm/bcm97362svmb.dts new file mode 100644 index 000000000000..b7b88e5dc9e7 --- /dev/null +++ b/arch/mips/boot/dts/brcm/bcm97362svmb.dts @@ -0,0 +1,34 @@ +/dts-v1/; + +/include/ "bcm7362.dtsi" + +/ { + compatible = "brcm,bcm97362svmb", "brcm,bcm7362"; + model = "Broadcom BCM97362SVMB"; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x10000000>, <0x20000000 0x30000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + stdout-path = &uart0; + }; +}; + +&uart0 { + status = "okay"; +}; + +&enet0 { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; diff --git a/arch/mips/boot/dts/brcm/bcm97420c.dts b/arch/mips/boot/dts/brcm/bcm97420c.dts new file mode 100644 index 000000000000..67fe1f3a3891 --- /dev/null +++ b/arch/mips/boot/dts/brcm/bcm97420c.dts @@ -0,0 +1,45 @@ +/dts-v1/; + +/include/ "bcm7420.dtsi" + +/ { + compatible = "brcm,bcm97420c", "brcm,bcm7420"; + model = "Broadcom BCM97420C"; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x10000000>, + <0x20000000 0x30000000>, + <0x60000000 0x10000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + stdout-path = &uart0; + }; +}; + +&uart0 { + status = "okay"; +}; + +/* FIXME: MAC driver comes up but cannot attach to PHY */ +&enet0 { + status = "disabled"; +}; + +&ehci0 { + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; diff --git a/arch/mips/boot/dts/brcm/bcm97425svmb.dts b/arch/mips/boot/dts/brcm/bcm97425svmb.dts new file mode 100644 index 000000000000..689c68a4f9c8 --- /dev/null +++ b/arch/mips/boot/dts/brcm/bcm97425svmb.dts @@ -0,0 +1,60 @@ +/dts-v1/; + +/include/ "bcm7425.dtsi" + +/ { + compatible = "brcm,bcm97425svmb", "brcm,bcm7425"; + model = "Broadcom BCM97425SVMB"; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x10000000>, + <0x20000000 0x30000000>, + <0x90000000 0x40000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + stdout-path = &uart0; + }; +}; + +&uart0 { + status = "okay"; +}; + +&enet0 { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&ehci2 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; + +&ehci3 { + status = "okay"; +}; + +&ohci3 { + status = "okay"; +}; diff --git a/arch/mips/boot/dts/brcm/bcm9ejtagprb.dts b/arch/mips/boot/dts/brcm/bcm9ejtagprb.dts new file mode 100644 index 000000000000..1da4608680aa --- /dev/null +++ b/arch/mips/boot/dts/brcm/bcm9ejtagprb.dts @@ -0,0 +1,22 @@ +/dts-v1/; + +/include/ "bcm6328.dtsi" + +/ { + compatible = "brcm,bcm9ejtagprb", "brcm,bcm6328"; + model = "Broadcom BCM9EJTAGPRB"; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x08000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + stdout-path = &uart0; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/mips/boot/dts/cavium-octeon/Makefile b/arch/mips/boot/dts/cavium-octeon/Makefile new file mode 100644 index 000000000000..5b99c40a058f --- /dev/null +++ b/arch/mips/boot/dts/cavium-octeon/Makefile @@ -0,0 +1,9 @@ +dtb-$(CONFIG_CAVIUM_OCTEON_SOC) += octeon_3xxx.dtb octeon_68xx.dtb + +obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y)) + +# Force kbuild to make empty built-in.o if necessary +obj- += dummy.o + +always := $(dtb-y) +clean-files := *.dtb *.dtb.S diff --git a/arch/mips/boot/dts/octeon_3xxx.dts b/arch/mips/boot/dts/cavium-octeon/octeon_3xxx.dts index fa33115bde33..9c48e0586ba7 100644 --- a/arch/mips/boot/dts/octeon_3xxx.dts +++ b/arch/mips/boot/dts/cavium-octeon/octeon_3xxx.dts @@ -587,4 +587,16 @@ usbn = &usbn; led0 = &led0; }; + + dsr1000n-leds { + compatible = "gpio-leds"; + usb1 { + label = "usb1"; + gpios = <&gpio 9 1>; /* Active low */ + }; + usb2 { + label = "usb2"; + gpios = <&gpio 10 1>; /* Active low */ + }; + }; }; diff --git a/arch/mips/boot/dts/octeon_68xx.dts b/arch/mips/boot/dts/cavium-octeon/octeon_68xx.dts index 79b46fcb0a11..79b46fcb0a11 100644 --- a/arch/mips/boot/dts/octeon_68xx.dts +++ b/arch/mips/boot/dts/cavium-octeon/octeon_68xx.dts diff --git a/arch/mips/boot/dts/lantiq/Makefile b/arch/mips/boot/dts/lantiq/Makefile new file mode 100644 index 000000000000..0906c62141b9 --- /dev/null +++ b/arch/mips/boot/dts/lantiq/Makefile @@ -0,0 +1,9 @@ +dtb-$(CONFIG_DT_EASY50712) += easy50712.dtb + +obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y)) + +# Force kbuild to make empty built-in.o if necessary +obj- += dummy.o + +always := $(dtb-y) +clean-files := *.dtb *.dtb.S diff --git a/arch/mips/boot/dts/danube.dtsi b/arch/mips/boot/dts/lantiq/danube.dtsi index d4c59e003708..d4c59e003708 100644 --- a/arch/mips/boot/dts/danube.dtsi +++ b/arch/mips/boot/dts/lantiq/danube.dtsi diff --git a/arch/mips/boot/dts/easy50712.dts b/arch/mips/boot/dts/lantiq/easy50712.dts index 143b8a37b5e4..143b8a37b5e4 100644 --- a/arch/mips/boot/dts/easy50712.dts +++ b/arch/mips/boot/dts/lantiq/easy50712.dts diff --git a/arch/mips/boot/dts/mti/Makefile b/arch/mips/boot/dts/mti/Makefile new file mode 100644 index 000000000000..ef1f3dbed033 --- /dev/null +++ b/arch/mips/boot/dts/mti/Makefile @@ -0,0 +1,9 @@ +dtb-$(CONFIG_MIPS_SEAD3) += sead3.dtb + +obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y)) + +# Force kbuild to make empty built-in.o if necessary +obj- += dummy.o + +always := $(dtb-y) +clean-files := *.dtb *.dtb.S diff --git a/arch/mips/boot/dts/sead3.dts b/arch/mips/boot/dts/mti/sead3.dts index e4b317d414f1..e4b317d414f1 100644 --- a/arch/mips/boot/dts/sead3.dts +++ b/arch/mips/boot/dts/mti/sead3.dts diff --git a/arch/mips/boot/dts/netlogic/Makefile b/arch/mips/boot/dts/netlogic/Makefile new file mode 100644 index 000000000000..9868057140b5 --- /dev/null +++ b/arch/mips/boot/dts/netlogic/Makefile @@ -0,0 +1,13 @@ +dtb-$(CONFIG_DT_XLP_EVP) += xlp_evp.dtb +dtb-$(CONFIG_DT_XLP_SVP) += xlp_svp.dtb +dtb-$(CONFIG_DT_XLP_FVP) += xlp_fvp.dtb +dtb-$(CONFIG_DT_XLP_GVP) += xlp_gvp.dtb +dtb-$(CONFIG_DT_XLP_RVP) += xlp_rvp.dtb + +obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y)) + +# Force kbuild to make empty built-in.o if necessary +obj- += dummy.o + +always := $(dtb-y) +clean-files := *.dtb *.dtb.S diff --git a/arch/mips/boot/dts/xlp_evp.dts b/arch/mips/boot/dts/netlogic/xlp_evp.dts index 89ad04808c02..89ad04808c02 100644 --- a/arch/mips/boot/dts/xlp_evp.dts +++ b/arch/mips/boot/dts/netlogic/xlp_evp.dts diff --git a/arch/mips/boot/dts/xlp_fvp.dts b/arch/mips/boot/dts/netlogic/xlp_fvp.dts index 63e62b7bd758..63e62b7bd758 100644 --- a/arch/mips/boot/dts/xlp_fvp.dts +++ b/arch/mips/boot/dts/netlogic/xlp_fvp.dts diff --git a/arch/mips/boot/dts/xlp_gvp.dts b/arch/mips/boot/dts/netlogic/xlp_gvp.dts index bb4ecd1d47fc..bb4ecd1d47fc 100644 --- a/arch/mips/boot/dts/xlp_gvp.dts +++ b/arch/mips/boot/dts/netlogic/xlp_gvp.dts diff --git a/arch/mips/boot/dts/netlogic/xlp_rvp.dts b/arch/mips/boot/dts/netlogic/xlp_rvp.dts new file mode 100644 index 000000000000..7188aed2ea2e --- /dev/null +++ b/arch/mips/boot/dts/netlogic/xlp_rvp.dts @@ -0,0 +1,77 @@ +/* + * XLP5XX Device Tree Source for RVP boards + */ + +/dts-v1/; +/ { + model = "netlogic,XLP-RVP"; + compatible = "netlogic,xlp"; + #address-cells = <2>; + #size-cells = <2>; + + soc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0 0 0 0x18000000 0x04000000 // PCIe CFG + 1 0 0 0x16000000 0x02000000>; // GBU chipselects + + serial0: serial@30000 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0 0x112100 0xa00>; + reg-shift = <2>; + reg-io-width = <4>; + clock-frequency = <125000000>; + interrupt-parent = <&pic>; + interrupts = <17>; + }; + pic: pic@110000 { + compatible = "netlogic,xlp-pic"; + #address-cells = <0>; + #interrupt-cells = <1>; + reg = <0 0x110000 0x200>; + interrupt-controller; + }; + + nor_flash@1,0 { + compatible = "cfi-flash"; + #address-cells = <1>; + #size-cells = <1>; + bank-width = <2>; + reg = <1 0 0x1000000>; + + partition@0 { + label = "x-loader"; + reg = <0x0 0x100000>; /* 1M */ + read-only; + }; + + partition@100000 { + label = "u-boot"; + reg = <0x100000 0x100000>; /* 1M */ + }; + + partition@200000 { + label = "kernel"; + reg = <0x200000 0x500000>; /* 5M */ + }; + + partition@700000 { + label = "rootfs"; + reg = <0x700000 0x800000>; /* 8M */ + }; + + partition@f00000 { + label = "env"; + reg = <0xf00000 0x100000>; /* 1M */ + read-only; + }; + }; + + }; + + chosen { + bootargs = "console=ttyS0,115200 rdinit=/sbin/init"; + }; +}; diff --git a/arch/mips/boot/dts/xlp_svp.dts b/arch/mips/boot/dts/netlogic/xlp_svp.dts index 1ebd00edaacc..1ebd00edaacc 100644 --- a/arch/mips/boot/dts/xlp_svp.dts +++ b/arch/mips/boot/dts/netlogic/xlp_svp.dts diff --git a/arch/mips/boot/dts/ralink/Makefile b/arch/mips/boot/dts/ralink/Makefile new file mode 100644 index 000000000000..2a7225954bf6 --- /dev/null +++ b/arch/mips/boot/dts/ralink/Makefile @@ -0,0 +1,12 @@ +dtb-$(CONFIG_DTB_RT2880_EVAL) += rt2880_eval.dtb +dtb-$(CONFIG_DTB_RT305X_EVAL) += rt3052_eval.dtb +dtb-$(CONFIG_DTB_RT3883_EVAL) += rt3883_eval.dtb +dtb-$(CONFIG_DTB_MT7620A_EVAL) += mt7620a_eval.dtb + +obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y)) + +# Force kbuild to make empty built-in.o if necessary +obj- += dummy.o + +always := $(dtb-y) +clean-files := *.dtb *.dtb.S diff --git a/arch/mips/boot/dts/mt7620a.dtsi b/arch/mips/boot/dts/ralink/mt7620a.dtsi index 08bf24fefe9f..08bf24fefe9f 100644 --- a/arch/mips/boot/dts/mt7620a.dtsi +++ b/arch/mips/boot/dts/ralink/mt7620a.dtsi diff --git a/arch/mips/boot/dts/mt7620a_eval.dts b/arch/mips/boot/dts/ralink/mt7620a_eval.dts index 709f58132f5c..709f58132f5c 100644 --- a/arch/mips/boot/dts/mt7620a_eval.dts +++ b/arch/mips/boot/dts/ralink/mt7620a_eval.dts diff --git a/arch/mips/boot/dts/rt2880.dtsi b/arch/mips/boot/dts/ralink/rt2880.dtsi index 182afde2f2e1..182afde2f2e1 100644 --- a/arch/mips/boot/dts/rt2880.dtsi +++ b/arch/mips/boot/dts/ralink/rt2880.dtsi diff --git a/arch/mips/boot/dts/rt2880_eval.dts b/arch/mips/boot/dts/ralink/rt2880_eval.dts index 0a685db093d4..0a685db093d4 100644 --- a/arch/mips/boot/dts/rt2880_eval.dts +++ b/arch/mips/boot/dts/ralink/rt2880_eval.dts diff --git a/arch/mips/boot/dts/rt3050.dtsi b/arch/mips/boot/dts/ralink/rt3050.dtsi index e3203d414fee..e3203d414fee 100644 --- a/arch/mips/boot/dts/rt3050.dtsi +++ b/arch/mips/boot/dts/ralink/rt3050.dtsi diff --git a/arch/mips/boot/dts/rt3052_eval.dts b/arch/mips/boot/dts/ralink/rt3052_eval.dts index ec9e9a035541..ec9e9a035541 100644 --- a/arch/mips/boot/dts/rt3052_eval.dts +++ b/arch/mips/boot/dts/ralink/rt3052_eval.dts diff --git a/arch/mips/boot/dts/rt3883.dtsi b/arch/mips/boot/dts/ralink/rt3883.dtsi index 3b131dd0d5ac..3b131dd0d5ac 100644 --- a/arch/mips/boot/dts/rt3883.dtsi +++ b/arch/mips/boot/dts/ralink/rt3883.dtsi diff --git a/arch/mips/boot/dts/rt3883_eval.dts b/arch/mips/boot/dts/ralink/rt3883_eval.dts index e8df21a5d10d..e8df21a5d10d 100644 --- a/arch/mips/boot/dts/rt3883_eval.dts +++ b/arch/mips/boot/dts/ralink/rt3883_eval.dts |