summaryrefslogtreecommitdiffstats
path: root/arch/x86/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'arch/x86/Kconfig')
-rw-r--r--arch/x86/Kconfig276
1 files changed, 138 insertions, 138 deletions
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 10dae8b96ed5..8ea987dd44f1 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -3,7 +3,7 @@
config 64BIT
bool "64-bit kernel" if "$(ARCH)" = "x86"
default "$(ARCH)" != "i386"
- ---help---
+ help
Say yes to build a 64-bit kernel - formerly known as x86_64
Say no to build a 32-bit kernel - formerly known as i386
@@ -386,7 +386,7 @@ config ZONE_DMA
config SMP
bool "Symmetric multi-processing support"
- ---help---
+ help
This enables support for systems with more than one CPU. If you have
a system with only one CPU, say N. If you have a system with more
than one CPU, say Y.
@@ -415,7 +415,7 @@ config SMP
config X86_FEATURE_NAMES
bool "Processor feature human-readable names" if EMBEDDED
default y
- ---help---
+ help
This option compiles in a table of x86 feature bits and corresponding
names. This is required to support /proc/cpuinfo and a few kernel
messages. You can disable this to save space, at the expense of
@@ -426,7 +426,7 @@ config X86_FEATURE_NAMES
config X86_X2APIC
bool "Support x2apic"
depends on X86_LOCAL_APIC && X86_64 && (IRQ_REMAP || HYPERVISOR_GUEST)
- ---help---
+ help
This enables x2apic support on CPUs that have this feature.
This allows 32-bit apic IDs (so it can support very large systems),
@@ -438,7 +438,7 @@ config X86_MPPARSE
bool "Enable MPS table" if ACPI || SFI
default y
depends on X86_LOCAL_APIC
- ---help---
+ help
For old smp systems that do not have proper acpi support. Newer systems
(esp with 64bit cpus) with acpi support, MADT and DSDT will override it
@@ -481,13 +481,13 @@ if X86_32
config X86_BIGSMP
bool "Support for big SMP systems with more than 8 CPUs"
depends on SMP
- ---help---
+ help
This option is needed for the systems that have more than 8 CPUs.
config X86_EXTENDED_PLATFORM
bool "Support for extended (non-PC) x86 platforms"
default y
- ---help---
+ help
If you disable this option then the kernel will only support
standard PC platforms. (which covers the vast majority of
systems out there.)
@@ -509,7 +509,7 @@ if X86_64
config X86_EXTENDED_PLATFORM
bool "Support for extended (non-PC) x86 platforms"
default y
- ---help---
+ help
If you disable this option then the kernel will only support
standard PC platforms. (which covers the vast majority of
systems out there.)
@@ -533,7 +533,7 @@ config X86_NUMACHIP
depends on SMP
depends on X86_X2APIC
depends on PCI_MMCONFIG
- ---help---
+ help
Adds support for Numascale NumaChip large-SMP systems. Needed to
enable more than ~168 cores.
If you don't have one of these, you should say N here.
@@ -545,7 +545,7 @@ config X86_VSMP
depends on X86_64 && PCI
depends on X86_EXTENDED_PLATFORM
depends on SMP
- ---help---
+ help
Support for ScaleMP vSMP systems. Say 'Y' here if this kernel is
supposed to run on these EM64T-based machines. Only choose this option
if you have one of these machines.
@@ -558,7 +558,7 @@ config X86_UV
depends on EFI
depends on X86_X2APIC
depends on PCI
- ---help---
+ help
This option is needed in order to support SGI Ultraviolet systems.
If you don't have one of these, you should say N here.
@@ -568,7 +568,7 @@ config X86_UV
config X86_GOLDFISH
bool "Goldfish (Virtual Platform)"
depends on X86_EXTENDED_PLATFORM
- ---help---
+ help
Enable support for the Goldfish virtual platform used primarily
for Android development. Unless you are building for the Android
Goldfish emulator say N here.
@@ -583,7 +583,7 @@ config X86_INTEL_CE
select X86_REBOOTFIXUPS
select OF
select OF_EARLY_FLATTREE
- ---help---
+ help
Select for the Intel CE media processor (CE4100) SOC.
This option compiles in support for the CE4100 SOC for settop
boxes and media devices.
@@ -601,7 +601,7 @@ config X86_INTEL_MID
select APB_TIMER
select INTEL_SCU_PCI
select MFD_INTEL_MSIC
- ---help---
+ help
Select to build a kernel capable of supporting Intel MID (Mobile
Internet Device) platform systems which do not have the PCI legacy
interfaces. If you are building for a PC class system say N here.
@@ -621,7 +621,7 @@ config X86_INTEL_QUARK
select IOSF_MBI
select INTEL_IMR
select COMMON_CLK
- ---help---
+ help
Select to include support for Quark X1000 SoC.
Say Y here if you have a Quark based system such as the Arduino
compatible Intel Galileo.
@@ -632,7 +632,7 @@ config X86_INTEL_LPSS
select COMMON_CLK
select PINCTRL
select IOSF_MBI
- ---help---
+ help
Select to build support for Intel Low Power Subsystem such as
found on Intel Lynxpoint PCH. Selecting this option enables
things like clock tree (common clock framework) and pincontrol
@@ -643,7 +643,7 @@ config X86_AMD_PLATFORM_DEVICE
depends on ACPI
select COMMON_CLK
select PINCTRL
- ---help---
+ help
Select to interpret AMD specific ACPI device to platform device
such as I2C, UART, GPIO found on AMD Carrizo and later chipsets.
I2C and UART depend on COMMON_CLK to set clock. GPIO driver is
@@ -652,7 +652,7 @@ config X86_AMD_PLATFORM_DEVICE
config IOSF_MBI
tristate "Intel SoC IOSF Sideband support for SoC platforms"
depends on PCI
- ---help---
+ help
This option enables sideband register access support for Intel SoC
platforms. On these platforms the IOSF sideband is used in lieu of
MSR's for some register accesses, mostly but not limited to thermal
@@ -669,7 +669,7 @@ config IOSF_MBI
config IOSF_MBI_DEBUG
bool "Enable IOSF sideband access through debugfs"
depends on IOSF_MBI && DEBUG_FS
- ---help---
+ help
Select this option to expose the IOSF sideband access registers (MCR,
MDR, MCRX) through debugfs to write and read register information from
different units on the SoC. This is most useful for obtaining device
@@ -685,7 +685,7 @@ config X86_RDC321X
depends on X86_EXTENDED_PLATFORM
select M486
select X86_REBOOTFIXUPS
- ---help---
+ help
This option is needed for RDC R-321x system-on-chip, also known
as R-8610-(G).
If you don't have one of these chips, you should say N here.
@@ -694,7 +694,7 @@ config X86_32_NON_STANDARD
bool "Support non-standard 32-bit SMP architectures"
depends on X86_32 && SMP
depends on X86_EXTENDED_PLATFORM
- ---help---
+ help
This option compiles in the bigsmp and STA2X11 default
subarchitectures. It is intended for a generic binary
kernel. If you select them all, kernel will probe it one by
@@ -717,7 +717,7 @@ config STA2X11
select SWIOTLB
select MFD_STA2X11
select GPIOLIB
- ---help---
+ help
This adds support for boards based on the STA2X11 IO-Hub,
a.k.a. "ConneXt". The chip is used in place of the standard
PC chipset, so all "standard" peripherals are missing. If this
@@ -727,7 +727,7 @@ config STA2X11
config X86_32_IRIS
tristate "Eurobraille/Iris poweroff module"
depends on X86_32
- ---help---
+ help
The Iris machines from EuroBraille do not have APM or ACPI support
to shut themselves down properly. A special I/O sequence is
needed to do so, which is what this module does at
@@ -741,7 +741,7 @@ config SCHED_OMIT_FRAME_POINTER
def_bool y
prompt "Single-depth WCHAN output"
depends on X86
- ---help---
+ help
Calculate simpler /proc/<PID>/wchan values. If this option
is disabled then wchan values will recurse back to the
caller function. This provides more accurate wchan values,
@@ -751,7 +751,7 @@ config SCHED_OMIT_FRAME_POINTER
menuconfig HYPERVISOR_GUEST
bool "Linux guest support"
- ---help---
+ help
Say Y here to enable options for running Linux under various hyper-
visors. This option enables basic hypervisor detection and platform
setup.
@@ -763,7 +763,7 @@ if HYPERVISOR_GUEST
config PARAVIRT
bool "Enable paravirtualization code"
- ---help---
+ help
This changes the kernel so it can modify itself when it is run
under a hypervisor, potentially improving performance significantly
over full virtualization. However, when run without a hypervisor
@@ -775,14 +775,14 @@ config PARAVIRT_XXL
config PARAVIRT_DEBUG
bool "paravirt-ops debugging"
depends on PARAVIRT && DEBUG_KERNEL
- ---help---
+ help
Enable to debug paravirt_ops internals. Specifically, BUG if
a paravirt_op is missing when it is called.
config PARAVIRT_SPINLOCKS
bool "Paravirtualization layer for spinlocks"
depends on PARAVIRT && SMP
- ---help---
+ help
Paravirtualized spinlocks allow a pvops backend to replace the
spinlock implementation with something virtualization-friendly
(for example, block the virtual CPU rather than spinning).
@@ -803,7 +803,7 @@ config KVM_GUEST
select PARAVIRT_CLOCK
select ARCH_CPUIDLE_HALTPOLL
default y
- ---help---
+ help
This option enables various optimizations for running under the KVM
hypervisor. It includes a paravirtualized clock, so that instead
of relying on a PIT (or probably other) emulation by the
@@ -818,14 +818,14 @@ config ARCH_CPUIDLE_HALTPOLL
config PVH
bool "Support for running PVH guests"
- ---help---
+ help
This option enables the PVH entry point for guest virtual machines
as specified in the x86/HVM direct boot ABI.
config KVM_DEBUG_FS
bool "Enable debug information for KVM Guests in debugfs"
depends on KVM_GUEST && DEBUG_FS
- ---help---
+ help
This option enables collection of various statistics for KVM guest.
Statistics are displayed in debugfs filesystem. Enabling this option
may incur significant overhead.
@@ -833,7 +833,7 @@ config KVM_DEBUG_FS
config PARAVIRT_TIME_ACCOUNTING
bool "Paravirtual steal time accounting"
depends on PARAVIRT
- ---help---
+ help
Select this option to enable fine granularity task steal time
accounting. Time spent executing other tasks in parallel with
the current vCPU is discounted from the vCPU power. To account for
@@ -848,7 +848,7 @@ config JAILHOUSE_GUEST
bool "Jailhouse non-root cell support"
depends on X86_64 && PCI
select X86_PM_TIMER
- ---help---
+ help
This option allows to run Linux as guest in a Jailhouse non-root
cell. You can leave this option disabled if you only want to start
Jailhouse and run Linux afterwards in the root cell.
@@ -871,7 +871,7 @@ source "arch/x86/Kconfig.cpu"
config HPET_TIMER
def_bool X86_64
prompt "HPET Timer Support" if X86_32
- ---help---
+ help
Use the IA-PC HPET (High Precision Event Timer) to manage
time in preference to the PIT and RTC, if a HPET is
present.
@@ -909,7 +909,7 @@ config DMI
default y
select DMI_SCAN_MACHINE_NON_EFI_FALLBACK
bool "Enable DMI scanning" if EXPERT
- ---help---
+ help
Enabled scanning of DMI to identify machine quirks. Say Y
here unless you have verified that your setup is not
affected by entries in the DMI blacklist. Required by PNP
@@ -920,7 +920,7 @@ config GART_IOMMU
select IOMMU_HELPER
select SWIOTLB
depends on X86_64 && PCI && AMD_NB
- ---help---
+ help
Provides a driver for older AMD Athlon64/Opteron/Turion/Sempron
GART based hardware IOMMUs.
@@ -941,7 +941,7 @@ config MAXSMP
bool "Enable Maximum number of SMP Processors and NUMA Nodes"
depends on X86_64 && SMP && DEBUG_KERNEL
select CPUMASK_OFFSTACK
- ---help---
+ help
Enable maximum number of CPUS and NUMA Nodes for this architecture.
If unsure, say N.
@@ -997,7 +997,7 @@ config NR_CPUS
int "Maximum number of CPUs" if SMP && !MAXSMP
range NR_CPUS_RANGE_BEGIN NR_CPUS_RANGE_END
default NR_CPUS_DEFAULT
- ---help---
+ help
This allows you to specify the maximum number of CPUs which this
kernel will support. If CPUMASK_OFFSTACK is enabled, the maximum
supported value is 8192, otherwise the maximum value is 512. The
@@ -1013,7 +1013,7 @@ config SCHED_MC
def_bool y
prompt "Multi-core scheduler support"
depends on SMP
- ---help---
+ help
Multi-core scheduler support improves the CPU scheduler's decision
making when dealing with multi-core CPU chips at a cost of slightly
increased overhead in some places. If unsure say N here.
@@ -1024,7 +1024,7 @@ config SCHED_MC_PRIO
select X86_INTEL_PSTATE
select CPU_FREQ
default y
- ---help---
+ help
Intel Turbo Boost Max Technology 3.0 enabled CPUs have a
core ordering determined at manufacturing time, which allows
certain cores to reach higher turbo frequencies (when running
@@ -1047,7 +1047,7 @@ config X86_UP_APIC
bool "Local APIC support on uniprocessors" if !PCI_MSI
default PCI_MSI
depends on X86_32 && !SMP && !X86_32_NON_STANDARD
- ---help---
+ help
A local APIC (Advanced Programmable Interrupt Controller) is an
integrated interrupt controller in the CPU. If you have a single-CPU
system which has a processor with a local APIC, you can say Y here to
@@ -1060,7 +1060,7 @@ config X86_UP_APIC
config X86_UP_IOAPIC
bool "IO-APIC support on uniprocessors"
depends on X86_UP_APIC
- ---help---
+ help
An IO-APIC (I/O Advanced Programmable Interrupt Controller) is an
SMP-capable replacement for PC-style interrupt controllers. Most
SMP systems and many recent uniprocessor systems have one.
@@ -1082,7 +1082,7 @@ config X86_IO_APIC
config X86_REROUTE_FOR_BROKEN_BOOT_IRQS
bool "Reroute for broken boot IRQs"
depends on X86_IO_APIC
- ---help---
+ help
This option enables a workaround that fixes a source of
spurious interrupts. This is recommended when threaded
interrupt handling is used on systems where the generation of
@@ -1106,7 +1106,7 @@ config X86_MCE
bool "Machine Check / overheating reporting"
select GENERIC_ALLOCATOR
default y
- ---help---
+ help
Machine Check support allows the processor to notify the
kernel if it detects a problem (e.g. overheating, data corruption).
The action the kernel takes depends on the severity of the problem,
@@ -1115,7 +1115,7 @@ config X86_MCE
config X86_MCELOG_LEGACY
bool "Support for deprecated /dev/mcelog character device"
depends on X86_MCE
- ---help---
+ help
Enable support for /dev/mcelog which is needed by the old mcelog
userspace logging daemon. Consider switching to the new generation
rasdaemon solution.
@@ -1124,7 +1124,7 @@ config X86_MCE_INTEL
def_bool y
prompt "Intel MCE features"
depends on X86_MCE && X86_LOCAL_APIC
- ---help---
+ help
Additional support for intel specific MCE features such as
the thermal monitor.
@@ -1132,14 +1132,14 @@ config X86_MCE_AMD
def_bool y
prompt "AMD MCE features"
depends on X86_MCE && X86_LOCAL_APIC && AMD_NB
- ---help---
+ help
Additional support for AMD specific MCE features such as
the DRAM Error Threshold.
config X86_ANCIENT_MCE
bool "Support for old Pentium 5 / WinChip machine checks"
depends on X86_32 && X86_MCE
- ---help---
+ help
Include support for machine check handling on old Pentium 5 or WinChip
systems. These typically need to be enabled explicitly on the command
line.
@@ -1151,7 +1151,7 @@ config X86_MCE_THRESHOLD
config X86_MCE_INJECT
depends on X86_MCE && X86_LOCAL_APIC && DEBUG_FS
tristate "Machine check injector support"
- ---help---
+ help
Provide support for injecting machine checks for testing purposes.
If you don't know what a machine check is and you don't do kernel
QA it is safe to say n.
@@ -1165,7 +1165,7 @@ source "arch/x86/events/Kconfig"
config X86_LEGACY_VM86
bool "Legacy VM86 support"
depends on X86_32
- ---help---
+ help
This option allows user programs to put the CPU into V8086
mode, which is an 80286-era approximation of 16-bit real mode.
@@ -1197,7 +1197,7 @@ config X86_16BIT
bool "Enable support for 16-bit segments" if EXPERT
default y
depends on MODIFY_LDT_SYSCALL
- ---help---
+ help
This option is required by programs like Wine to run 16-bit
protected mode legacy code on x86 processors. Disabling
this option saves about 300 bytes on i386, or around 6K text
@@ -1215,7 +1215,7 @@ config X86_VSYSCALL_EMULATION
bool "Enable vsyscall emulation" if EXPERT
default y
depends on X86_64
- ---help---
+ help
This enables emulation of the legacy vsyscall page. Disabling
it is roughly equivalent to booting with vsyscall=none, except
that it will also disable the helpful warning if a program
@@ -1232,7 +1232,7 @@ config X86_VSYSCALL_EMULATION
config X86_IOPL_IOPERM
bool "IOPERM and IOPL Emulation"
default y
- ---help---
+ help
This enables the ioperm() and iopl() syscalls which are necessary
for legacy applications.
@@ -1250,7 +1250,7 @@ config X86_IOPL_IOPERM
config TOSHIBA
tristate "Toshiba Laptop support"
depends on X86_32
- ---help---
+ help
This adds a driver to safely access the System Management Mode of
the CPU on Toshiba portables with a genuine Toshiba BIOS. It does
not work on models with a Phoenix BIOS. The System Management Mode
@@ -1267,7 +1267,7 @@ config I8K
tristate "Dell i8k legacy laptop support"
select HWMON
select SENSORS_DELL_SMM
- ---help---
+ help
This option enables legacy /proc/i8k userspace interface in hwmon
dell-smm-hwmon driver. Character file /proc/i8k reports bios version,
temperature and allows controlling fan speeds of Dell laptops via
@@ -1282,7 +1282,7 @@ config I8K
config X86_REBOOTFIXUPS
bool "Enable X86 board specific fixups for reboot"
depends on X86_32
- ---help---
+ help
This enables chipset and/or board specific fixups to be done
in order to get reboot to work correctly. This is only needed on
some combinations of hardware and BIOS. The symptom, for which
@@ -1301,7 +1301,7 @@ config MICROCODE
default y
depends on CPU_SUP_AMD || CPU_SUP_INTEL
select FW_LOADER
- ---help---
+ help
If you say Y here, you will be able to update the microcode on
Intel and AMD processors. The Intel support is for the IA32 family,
e.g. Pentium Pro, Pentium II, Pentium III, Pentium 4, Xeon etc. The
@@ -1323,7 +1323,7 @@ config MICROCODE_INTEL
depends on MICROCODE
default MICROCODE
select FW_LOADER
- ---help---
+ help
This options enables microcode patch loading support for Intel
processors.
@@ -1335,7 +1335,7 @@ config MICROCODE_AMD
bool "AMD microcode loading support"
depends on MICROCODE
select FW_LOADER
- ---help---
+ help
If you select this option, microcode patch loading support for AMD
processors will be enabled.
@@ -1343,7 +1343,7 @@ config MICROCODE_OLD_INTERFACE
bool "Ancient loading interface (DEPRECATED)"
default n
depends on MICROCODE
- ---help---
+ help
DO NOT USE THIS! This is the ancient /dev/cpu/microcode interface
which was used by userspace tools like iucode_tool and microcode.ctl.
It is inadequate because it runs too late to be able to properly
@@ -1353,7 +1353,7 @@ config MICROCODE_OLD_INTERFACE
config X86_MSR
tristate "/dev/cpu/*/msr - Model-specific register support"
- ---help---
+ help
This device gives privileged processes access to the x86
Model-Specific Registers (MSRs). It is a character device with
major 202 and minors 0 to 31 for /dev/cpu/0/msr to /dev/cpu/31/msr.
@@ -1362,7 +1362,7 @@ config X86_MSR
config X86_CPUID
tristate "/dev/cpu/*/cpuid - CPU information support"
- ---help---
+ help
This device gives processes access to the x86 CPUID instruction to
be executed on a specific processor. It is a character device
with major 203 and minors 0 to 31 for /dev/cpu/0/cpuid to
@@ -1375,7 +1375,7 @@ choice
config NOHIGHMEM
bool "off"
- ---help---
+ help
Linux can use up to 64 Gigabytes of physical memory on x86 systems.
However, the address space of 32-bit x86 processors is only 4
Gigabytes large. That means that, if you have a large amount of
@@ -1411,7 +1411,7 @@ config NOHIGHMEM
config HIGHMEM4G
bool "4GB"
- ---help---
+ help
Select this if you have a 32-bit processor and between 1 and 4
gigabytes of physical RAM.
@@ -1419,7 +1419,7 @@ config HIGHMEM64G
bool "64GB"
depends on !M486 && !M586 && !M586TSC && !M586MMX && !MGEODE_LX && !MGEODEGX1 && !MCYRIXIII && !MELAN && !MWINCHIPC6 && !WINCHIP3D && !MK6
select X86_PAE
- ---help---
+ help
Select this if you have a 32-bit processor and more than 4
gigabytes of physical RAM.
@@ -1429,7 +1429,7 @@ choice
prompt "Memory split" if EXPERT
default VMSPLIT_3G
depends on X86_32
- ---help---
+ help
Select the desired split between kernel and user memory.
If the address range available to the kernel is less than the
@@ -1477,7 +1477,7 @@ config X86_PAE
depends on X86_32 && !HIGHMEM4G
select PHYS_ADDR_T_64BIT
select SWIOTLB
- ---help---
+ help
PAE is required for NX support, and furthermore enables
larger swapspace support for non-overcommit purposes. It
has the cost of more pagetable lookup overhead, and also
@@ -1489,7 +1489,7 @@ config X86_5LEVEL
select DYNAMIC_MEMORY_LAYOUT
select SPARSEMEM_VMEMMAP
depends on X86_64
- ---help---
+ help
5-level paging enables access to larger address space:
upto 128 PiB of virtual address space and 4 PiB of
physical address space.
@@ -1507,7 +1507,7 @@ config X86_5LEVEL
config X86_DIRECT_GBPAGES
def_bool y
depends on X86_64
- ---help---
+ help
Certain kernel features effectively disable kernel
linear 1 GB mappings (even if the CPU otherwise
supports them), so don't confuse the user by printing
@@ -1516,7 +1516,7 @@ config X86_DIRECT_GBPAGES
config X86_CPA_STATISTICS
bool "Enable statistic for Change Page Attribute"
depends on DEBUG_FS
- ---help---
+ help
Expose statistics about the Change Page Attribute mechanism, which
helps to determine the effectiveness of preserving large and huge
page mappings when mapping protections are changed.
@@ -1528,7 +1528,7 @@ config AMD_MEM_ENCRYPT
select DYNAMIC_PHYSICAL_MASK
select ARCH_USE_MEMREMAP_PROT
select ARCH_HAS_FORCE_DMA_UNENCRYPTED
- ---help---
+ help
Say yes to enable support for the encryption of system memory.
This requires an AMD processor that supports Secure Memory
Encryption (SME).
@@ -1537,7 +1537,7 @@ config AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT
bool "Activate AMD Secure Memory Encryption (SME) by default"
default y
depends on AMD_MEM_ENCRYPT
- ---help---
+ help
Say yes to have system memory encrypted by default if running on
an AMD processor that supports Secure Memory Encryption (SME).
@@ -1553,7 +1553,7 @@ config NUMA
depends on SMP
depends on X86_64 || (X86_32 && HIGHMEM64G && X86_BIGSMP)
default y if X86_BIGSMP
- ---help---
+ help
Enable NUMA (Non-Uniform Memory Access) support.
The kernel will try to allocate memory used by a CPU on the
@@ -1572,7 +1572,7 @@ config AMD_NUMA
def_bool y
prompt "Old style AMD Opteron NUMA detection"
depends on X86_64 && NUMA && PCI
- ---help---
+ help
Enable AMD NUMA node topology detection. You should say Y here if
you have a multi processor AMD system. This uses an old method to
read the NUMA configuration directly from the builtin Northbridge
@@ -1584,13 +1584,13 @@ config X86_64_ACPI_NUMA
prompt "ACPI NUMA detection"
depends on X86_64 && NUMA && ACPI && PCI
select ACPI_NUMA
- ---help---
+ help
Enable ACPI SRAT based node topology detection.
config NUMA_EMU
bool "NUMA emulation"
depends on NUMA
- ---help---
+ help
Enable NUMA emulation. A flat machine will be split
into virtual nodes when booted with "numa=fake=N", where N is the
number of nodes. This is only useful for debugging.
@@ -1602,7 +1602,7 @@ config NODES_SHIFT
default "6" if X86_64
default "3"
depends on NEED_MULTIPLE_NODES
- ---help---
+ help
Specify the maximum number of NUMA Nodes available on the target
system. Increases memory reserved to accommodate various tables.
@@ -1661,7 +1661,7 @@ config X86_PMEM_LEGACY
config HIGHPTE
bool "Allocate 3rd-level pagetables from highmem"
depends on HIGHMEM
- ---help---
+ help
The VM uses one page table entry for each page of physical memory.
For systems with a lot of RAM, this can be wasteful of precious
low memory. Setting this option will put user-space page table
@@ -1669,7 +1669,7 @@ config HIGHPTE
config X86_CHECK_BIOS_CORRUPTION
bool "Check for low memory corruption"
- ---help---
+ help
Periodically check for memory corruption in low memory, which
is suspected to be caused by BIOS. Even when enabled in the
configuration, it is disabled at runtime. Enable it by
@@ -1693,7 +1693,7 @@ config X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK
bool "Set the default setting of memory_corruption_check"
depends on X86_CHECK_BIOS_CORRUPTION
default y
- ---help---
+ help
Set whether the default state of memory_corruption_check is
on or off.
@@ -1701,7 +1701,7 @@ config X86_RESERVE_LOW
int "Amount of low memory, in kilobytes, to reserve for the BIOS"
default 64
range 4 640
- ---help---
+ help
Specify the amount of low memory to reserve for the BIOS.
The first page contains BIOS data structures that the kernel
@@ -1730,7 +1730,7 @@ config MATH_EMULATION
bool
depends on MODIFY_LDT_SYSCALL
prompt "Math emulation" if X86_32 && (M486SX || MELAN)
- ---help---
+ help
Linux can emulate a math coprocessor (used for floating point
operations) if you don't have one. 486DX and Pentium processors have
a math coprocessor built in, 486SX and 386 do not, unless you added
@@ -1756,7 +1756,7 @@ config MATH_EMULATION
config MTRR
def_bool y
prompt "MTRR (Memory Type Range Register) support" if EXPERT
- ---help---
+ help
On Intel P6 family processors (Pentium Pro, Pentium II and later)
the Memory Type Range Registers (MTRRs) may be used to control
processor access to memory ranges. This is most useful if you have
@@ -1792,7 +1792,7 @@ config MTRR_SANITIZER
def_bool y
prompt "MTRR cleanup support"
depends on MTRR
- ---help---
+ help
Convert MTRR layout from continuous to discrete, so X drivers can
add writeback entries.
@@ -1807,7 +1807,7 @@ config MTRR_SANITIZER_ENABLE_DEFAULT
range 0 1
default "0"
depends on MTRR_SANITIZER
- ---help---
+ help
Enable mtrr cleanup default value
config MTRR_SANITIZER_SPARE_REG_NR_DEFAULT
@@ -1815,7 +1815,7 @@ config MTRR_SANITIZER_SPARE_REG_NR_DEFAULT
range 0 7
default "1"
depends on MTRR_SANITIZER
- ---help---
+ help
mtrr cleanup spare entries default, it can be changed via
mtrr_spare_reg_nr=N on the kernel command line.
@@ -1823,7 +1823,7 @@ config X86_PAT
def_bool y
prompt "x86 PAT support" if EXPERT
depends on MTRR
- ---help---
+ help
Use PAT attributes to setup page level cache control.
PATs are the modern equivalents of MTRRs and are much more
@@ -1841,7 +1841,7 @@ config ARCH_USES_PG_UNCACHED
config ARCH_RANDOM
def_bool y
prompt "x86 architectural random number generator" if EXPERT
- ---help---
+ help
Enable the x86 architectural RDRAND instruction
(Intel Bull Mountain technology) to generate random numbers.
If supported, this is a high bandwidth, cryptographically
@@ -1850,7 +1850,7 @@ config ARCH_RANDOM
config X86_SMAP
def_bool y
prompt "Supervisor Mode Access Prevention" if EXPERT
- ---help---
+ help
Supervisor Mode Access Prevention (SMAP) is a security
feature in newer Intel processors. There is a small
performance cost if this enabled and turned on; there is
@@ -1861,7 +1861,7 @@ config X86_SMAP
config X86_UMIP
def_bool y
prompt "User Mode Instruction Prevention" if EXPERT
- ---help---
+ help
User Mode Instruction Prevention (UMIP) is a security feature in
some x86 processors. If enabled, a general protection fault is
issued if the SGDT, SLDT, SIDT, SMSW or STR instructions are
@@ -1880,7 +1880,7 @@ config X86_INTEL_MEMORY_PROTECTION_KEYS
depends on X86_64 && (CPU_SUP_INTEL || CPU_SUP_AMD)
select ARCH_USES_HIGH_VMA_FLAGS
select ARCH_HAS_PKEYS
- ---help---
+ help
Memory Protection Keys provides a mechanism for enforcing
page-based protections, but without requiring modification of the
page tables when an application changes protection domains.
@@ -1939,7 +1939,7 @@ config EFI
depends on ACPI
select UCS2_STRING
select EFI_RUNTIME_WRAPPERS
- ---help---
+ help
This enables the kernel to use EFI runtime services that are
available (such as the EFI variable services).
@@ -1955,7 +1955,7 @@ config EFI_STUB
depends on EFI && !X86_USE_3DNOW
depends on $(cc-option,-mabi=ms) || X86_32
select RELOCATABLE
- ---help---
+ help
This kernel feature allows a bzImage to be loaded directly
by EFI firmware without the use of a bootloader.
@@ -1964,7 +1964,7 @@ config EFI_STUB
config EFI_MIXED
bool "EFI mixed-mode support"
depends on EFI_STUB && X86_64
- ---help---
+ help
Enabling this feature allows a 64-bit kernel to be booted
on a 32-bit firmware, provided that your CPU supports 64-bit
mode.
@@ -1978,7 +1978,7 @@ config EFI_MIXED
config SECCOMP
def_bool y
prompt "Enable seccomp to safely compute untrusted bytecode"
- ---help---
+ help
This kernel feature is useful for number crunching applications
that may need to compute untrusted bytecode during their
execution. By using pipes or other transports made available to
@@ -1996,7 +1996,7 @@ source "kernel/Kconfig.hz"
config KEXEC
bool "kexec system call"
select KEXEC_CORE
- ---help---
+ help
kexec is a system call that implements the ability to shutdown your
current kernel, and to start another kernel. It is like a reboot
but it is independent of the system firmware. And like a reboot
@@ -2017,7 +2017,7 @@ config KEXEC_FILE
depends on X86_64
depends on CRYPTO=y
depends on CRYPTO_SHA256=y
- ---help---
+ help
This is new version of kexec system call. This system call is
file based and takes file descriptors as system call argument
for kernel and initramfs as opposed to list of segments as
@@ -2029,7 +2029,7 @@ config ARCH_HAS_KEXEC_PURGATORY
config KEXEC_SIG
bool "Verify kernel signature during kexec_file_load() syscall"
depends on KEXEC_FILE
- ---help---
+ help
This option makes the kexec_file_load() syscall check for a valid
signature of the kernel image. The image can still be loaded without
@@ -2043,7 +2043,7 @@ config KEXEC_SIG
config KEXEC_SIG_FORCE
bool "Require a valid signature in kexec_file_load() syscall"
depends on KEXEC_SIG
- ---help---
+ help
This option makes kernel signature verification mandatory for
the kexec_file_load() syscall.
@@ -2052,13 +2052,13 @@ config KEXEC_BZIMAGE_VERIFY_SIG
depends on KEXEC_SIG
depends on SIGNED_PE_FILE_VERIFICATION
select SYSTEM_TRUSTED_KEYRING
- ---help---
+ help
Enable bzImage signature verification support.
config CRASH_DUMP
bool "kernel crash dumps"
depends on X86_64 || (X86_32 && HIGHMEM)
- ---help---
+ help
Generate crash dump after being started by kexec.
This should be normally only set in special crash dump kernels
which are loaded in the main kernel with kexec-tools into
@@ -2072,14 +2072,14 @@ config CRASH_DUMP
config KEXEC_JUMP
bool "kexec jump"
depends on KEXEC && HIBERNATION
- ---help---
+ help
Jump between original kernel and kexeced kernel and invoke
code in physical address mode via KEXEC
config PHYSICAL_START
hex "Physical address where the kernel is loaded" if (EXPERT || CRASH_DUMP)
default "0x1000000"
- ---help---
+ help
This gives the physical address where the kernel is loaded.
If kernel is a not relocatable (CONFIG_RELOCATABLE=n) then
@@ -2120,7 +2120,7 @@ config PHYSICAL_START
config RELOCATABLE
bool "Build a relocatable kernel"
default y
- ---help---
+ help
This builds a kernel image that retains relocation information
so it can be loaded someplace besides the default 1MB.
The relocations tend to make the kernel binary about 10% larger,
@@ -2138,7 +2138,7 @@ config RANDOMIZE_BASE
bool "Randomize the address of the kernel image (KASLR)"
depends on RELOCATABLE
default y
- ---help---
+ help
In support of Kernel Address Space Layout Randomization (KASLR),
this randomizes the physical address at which the kernel image
is decompressed and the virtual address where the kernel
@@ -2179,7 +2179,7 @@ config PHYSICAL_ALIGN
default "0x200000"
range 0x2000 0x1000000 if X86_32
range 0x200000 0x1000000 if X86_64
- ---help---
+ help
This value puts the alignment restrictions on physical address
where kernel is loaded and run from. Kernel is compiled for an
address which meets above alignment restriction.
@@ -2203,7 +2203,7 @@ config PHYSICAL_ALIGN
config DYNAMIC_MEMORY_LAYOUT
bool
- ---help---
+ help
This option makes base addresses of vmalloc and vmemmap as well as
__PAGE_OFFSET movable during boot.
@@ -2213,7 +2213,7 @@ config RANDOMIZE_MEMORY
depends on RANDOMIZE_BASE
select DYNAMIC_MEMORY_LAYOUT
default RANDOMIZE_BASE
- ---help---
+ help
Randomizes the base virtual address of kernel memory sections
(physical memory mapping, vmalloc & vmemmap). This security feature
makes exploits relying on predictable memory locations less reliable.
@@ -2232,7 +2232,7 @@ config RANDOMIZE_MEMORY_PHYSICAL_PADDING
default "0x0"
range 0x1 0x40 if MEMORY_HOTPLUG
range 0x0 0x40
- ---help---
+ help
Define the padding in terabytes added to the existing physical
memory size during kernel memory randomization. It is useful
for memory hotplug support but reduces the entropy available for
@@ -2247,7 +2247,7 @@ config HOTPLUG_CPU
config BOOTPARAM_HOTPLUG_CPU0
bool "Set default setting of cpu0_hotpluggable"
depends on HOTPLUG_CPU
- ---help---
+ help
Set whether default state of cpu0_hotpluggable is on or off.
Say Y here to enable CPU0 hotplug by default. If this switch
@@ -2276,7 +2276,7 @@ config DEBUG_HOTPLUG_CPU0
def_bool n
prompt "Debug CPU0 hotplug"
depends on HOTPLUG_CPU
- ---help---
+ help
Enabling this option offlines CPU0 (if CPU0 can be offlined) as
soon as possible and boots up userspace with CPU0 offlined. User
can online CPU0 back after boot time.
@@ -2291,7 +2291,7 @@ config COMPAT_VDSO
def_bool n
prompt "Disable the 32-bit vDSO (needed for glibc 2.3.3)"
depends on COMPAT_32
- ---help---
+ help
Certain buggy versions of glibc will crash if they are
presented with a 32-bit vDSO that is not mapped at the address
indicated in its segment table.
@@ -2369,7 +2369,7 @@ endchoice
config CMDLINE_BOOL
bool "Built-in kernel command line"
- ---help---
+ help
Allow for specifying boot arguments to the kernel at
build time. On some systems (e.g. embedded ones), it is
necessary or convenient to provide some or all of the
@@ -2387,7 +2387,7 @@ config CMDLINE
string "Built-in kernel command string"
depends on CMDLINE_BOOL
default ""
- ---help---
+ help
Enter arguments here that should be compiled into the kernel
image and used at boot time. If the boot loader provides a
command line at boot time, it is appended to this string to
@@ -2403,7 +2403,7 @@ config CMDLINE
config CMDLINE_OVERRIDE
bool "Built-in command line overrides boot loader arguments"
depends on CMDLINE_BOOL && CMDLINE != ""
- ---help---
+ help
Set this option to 'Y' to have the kernel ignore the boot loader
command line, and use ONLY the built-in command line.
@@ -2413,7 +2413,7 @@ config CMDLINE_OVERRIDE
config MODIFY_LDT_SYSCALL
bool "Enable the LDT (local descriptor table)" if EXPERT
default y
- ---help---
+ help
Linux can allow user programs to install a per-process x86
Local Descriptor Table (LDT) using the modify_ldt(2) system
call. This is required to run 16-bit or segmented code such as
@@ -2477,7 +2477,7 @@ config X86_APM_BOOT
menuconfig APM
tristate "APM (Advanced Power Management) BIOS support"
depends on X86_32 && PM_SLEEP
- ---help---
+ help
APM is a BIOS specification for saving power using several different
techniques. This is mostly useful for battery powered laptops with
APM compliant BIOSes. If you say Y here, the system time will be
@@ -2537,14 +2537,14 @@ if APM
config APM_IGNORE_USER_SUSPEND
bool "Ignore USER SUSPEND"
- ---help---
+ help
This option will ignore USER SUSPEND requests. On machines with a
compliant APM BIOS, you want to say N. However, on the NEC Versa M
series notebooks, it is necessary to say Y because of a BIOS bug.
config APM_DO_ENABLE
bool "Enable PM at boot time"
- ---help---
+ help
Enable APM features at boot time. From page 36 of the APM BIOS
specification: "When disabled, the APM BIOS does not automatically
power manage devices, enter the Standby State, enter the Suspend
@@ -2562,7 +2562,7 @@ config APM_DO_ENABLE
config APM_CPU_IDLE
depends on CPU_IDLE
bool "Make CPU Idle calls when idle"
- ---help---
+ help
Enable calls to APM CPU Idle/CPU Busy inside the kernel's idle loop.
On some machines, this can activate improved power savings, such as
a slowed CPU clock rate, when the machine is idle. These idle calls
@@ -2573,7 +2573,7 @@ config APM_CPU_IDLE
config APM_DISPLAY_BLANK
bool "Enable console blanking using APM"
- ---help---
+ help
Enable console blanking using the APM. Some laptops can use this to
turn off the LCD backlight when the screen blanker of the Linux
virtual console blanks the screen. Note that this is only used by
@@ -2586,7 +2586,7 @@ config APM_DISPLAY_BLANK
config APM_ALLOW_INTS
bool "Allow interrupts during APM BIOS calls"
- ---help---
+ help
Normally we disable external interrupts while we are making calls to
the APM BIOS as a measure to lessen the effects of a badly behaving
BIOS implementation. The BIOS should reenable interrupts if it
@@ -2611,7 +2611,7 @@ choice
prompt "PCI access mode"
depends on X86_32 && PCI
default PCI_GOANY
- ---help---
+ help
On PCI systems, the BIOS can be used to detect the PCI devices and
determine their configuration. However, some old PCI motherboards
have BIOS bugs and may crash if this is done. Also, some embedded
@@ -2708,7 +2708,7 @@ if X86_32
config ISA
bool "ISA support"
- ---help---
+ help
Find out whether you have ISA slots on your motherboard. ISA is the
name of a bus system, i.e. the way the CPU talks to the other stuff
inside your box. Other bus systems are PCI, EISA, MicroChannel
@@ -2717,7 +2717,7 @@ config ISA
config SCx200
tristate "NatSemi SCx200 support"
- ---help---
+ help
This provides basic support for National Semiconductor's
(now AMD's) Geode processors. The driver probes for the
PCI-IDs of several on-chip devices, so its a good dependency
@@ -2729,7 +2729,7 @@ config SCx200HR_TIMER
tristate "NatSemi SCx200 27MHz High-Resolution Timer Support"
depends on SCx200
default y
- ---help---
+ help
This driver provides a clocksource built upon the on-chip
27MHz high-resolution timer. Its also a workaround for
NSC Geode SC-1100's buggy TSC, which loses time when the
@@ -2744,20 +2744,20 @@ config OLPC
select OF_PROMTREE
select IRQ_DOMAIN
select OLPC_EC
- ---help---
+ help
Add support for detecting the unique features of the OLPC
XO hardware.
config OLPC_XO1_PM
bool "OLPC XO-1 Power Management"
depends on OLPC && MFD_CS5535=y && PM_SLEEP
- ---help---
+ help
Add support for poweroff and suspend of the OLPC XO-1 laptop.
config OLPC_XO1_RTC
bool "OLPC XO-1 Real Time Clock"
depends on OLPC_XO1_PM && RTC_DRV_CMOS
- ---help---
+ help
Add support for the XO-1 real time clock, which can be used as a
programmable wakeup source.
@@ -2766,7 +2766,7 @@ config OLPC_XO1_SCI
depends on OLPC && OLPC_XO1_PM && GPIO_CS5535=y
depends on INPUT=y
select POWER_SUPPLY
- ---help---
+ help
Add support for SCI-based features of the OLPC XO-1 laptop:
- EC-driven system wakeups
- Power button
@@ -2779,7 +2779,7 @@ config OLPC_XO15_SCI
bool "OLPC XO-1.5 SCI extras"
depends on OLPC && ACPI
select POWER_SUPPLY
- ---help---
+ help
Add support for SCI-based features of the OLPC XO-1.5 laptop:
- EC-driven system wakeups
- AC adapter status updates
@@ -2788,7 +2788,7 @@ config OLPC_XO15_SCI
config ALIX
bool "PCEngines ALIX System Support (LED setup)"
select GPIOLIB
- ---help---
+ help
This option enables system support for the PCEngines ALIX.
At present this just sets up LEDs for GPIO control on
ALIX2/3/6 boards. However, other system specific setup should
@@ -2802,14 +2802,14 @@ config ALIX
config NET5501
bool "Soekris Engineering net5501 System Support (LEDS, GPIO, etc)"
select GPIOLIB
- ---help---
+ help
This option enables system support for the Soekris Engineering net5501.
config GEOS
bool "Traverse Technologies GEOS System Support (LEDS, GPIO, etc)"
select GPIOLIB
depends on DMI
- ---help---
+ help
This option enables system support for the Traverse Technologies GEOS.
config TS5500
@@ -2818,7 +2818,7 @@ config TS5500
select CHECK_SIGNATURE
select NEW_LEDS
select LEDS_CLASS
- ---help---
+ help
This option enables system support for the Technologic Systems TS-5500.
endif # X86_32
@@ -2865,7 +2865,7 @@ config IA32_EMULATION
select BINFMT_ELF
select COMPAT_BINFMT_ELF
select COMPAT_OLD_SIGACTION
- ---help---
+ help
Include code to run legacy 32-bit programs under a
64-bit kernel. You should likely turn this on, unless you're
100% sure that you don't have any 32-bit programs left.
@@ -2874,13 +2874,13 @@ config IA32_AOUT
tristate "IA32 a.out support"
depends on IA32_EMULATION
depends on BROKEN
- ---help---
+ help
Support old a.out binaries in the 32bit emulation.
config X86_X32
bool "x32 ABI for 64-bit mode"
depends on X86_64
- ---help---
+ help
Include code to run binaries for the x32 native 32-bit ABI
for 64-bit processors. An x32 process gets access to the
full 64-bit register file and wide data path while leaving