diff options
Diffstat (limited to 'arch')
67 files changed, 561 insertions, 1124 deletions
diff --git a/arch/arm/mach-at91rm9200/gpio.c b/arch/arm/mach-at91rm9200/gpio.c index a9f718bf8ba8..0e396feec468 100644 --- a/arch/arm/mach-at91rm9200/gpio.c +++ b/arch/arm/mach-at91rm9200/gpio.c @@ -274,8 +274,18 @@ static void gpio_irq_handler(unsigned irq, struct irqdesc *desc, struct pt_regs gpio = &irq_desc[pin]; while (isr) { - if (isr & 1) - gpio->handle(pin, gpio, regs); + if (isr & 1) { + if (unlikely(gpio->disable_depth)) { + /* + * The core ARM interrupt handler lazily disables IRQs so + * another IRQ must be generated before it actually gets + * here to be disabled on the GPIO controller. + */ + gpio_irq_mask(pin); + } + else + gpio->handle(pin, gpio, regs); + } pin++; gpio++; isr >>= 1; diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig index 0afec8566e7b..5b1a7d46d1d9 100644 --- a/arch/i386/Kconfig +++ b/arch/i386/Kconfig @@ -733,7 +733,7 @@ config PHYSICAL_START config HOTPLUG_CPU bool "Support for hot-pluggable CPUs (EXPERIMENTAL)" - depends on SMP && HOTPLUG && EXPERIMENTAL + depends on SMP && HOTPLUG && EXPERIMENTAL && !X86_VOYAGER ---help--- Say Y here to experiment with turning CPUs off and on. CPUs can be controlled through /sys/devices/system/cpu. @@ -1060,6 +1060,7 @@ source "arch/i386/oprofile/Kconfig" config KPROBES bool "Kprobes (EXPERIMENTAL)" + depends on EXPERIMENTAL && MODULES help Kprobes allows you to trap at almost any kernel address and execute a callback function. register_kprobe() establishes diff --git a/arch/i386/kernel/Makefile b/arch/i386/kernel/Makefile index 60c3f76dfca4..53bb9a79e274 100644 --- a/arch/i386/kernel/Makefile +++ b/arch/i386/kernel/Makefile @@ -7,7 +7,7 @@ extra-y := head.o init_task.o vmlinux.lds obj-y := process.o semaphore.o signal.o entry.o traps.o irq.o \ ptrace.o time.o ioport.o ldt.o setup.o i8259.o sys_i386.o \ pci-dma.o i386_ksyms.o i387.o dmi_scan.o bootflag.o \ - quirks.o i8237.o + quirks.o i8237.o topology.o obj-y += cpu/ obj-y += timers/ diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c index 79577f0ace98..8309a7b2cd63 100644 --- a/arch/i386/kernel/acpi/boot.c +++ b/arch/i386/kernel/acpi/boot.c @@ -44,9 +44,6 @@ extern void __init clustered_apic_check(void); extern int gsi_irq_sharing(int gsi); #include <asm/proto.h> -static inline int acpi_madt_oem_check(char *oem_id, char *oem_table_id) { return 0; } - - #else /* X86 */ #ifdef CONFIG_X86_LOCAL_APIC diff --git a/arch/i386/kernel/cpu/common.c b/arch/i386/kernel/cpu/common.c index 7eb9213734a3..4ecd4b326ded 100644 --- a/arch/i386/kernel/cpu/common.c +++ b/arch/i386/kernel/cpu/common.c @@ -4,6 +4,7 @@ #include <linux/smp.h> #include <linux/module.h> #include <linux/percpu.h> +#include <linux/bootmem.h> #include <asm/semaphore.h> #include <asm/processor.h> #include <asm/i387.h> @@ -18,6 +19,9 @@ #include "cpu.h" +DEFINE_PER_CPU(struct Xgt_desc_struct, cpu_gdt_descr); +EXPORT_PER_CPU_SYMBOL(cpu_gdt_descr); + DEFINE_PER_CPU(unsigned char, cpu_16bit_stack[CPU_16BIT_STACK_SIZE]); EXPORT_PER_CPU_SYMBOL(cpu_16bit_stack); @@ -571,8 +575,9 @@ void __devinit cpu_init(void) int cpu = smp_processor_id(); struct tss_struct * t = &per_cpu(init_tss, cpu); struct thread_struct *thread = ¤t->thread; - struct desc_struct *gdt = get_cpu_gdt_table(cpu); + struct desc_struct *gdt; __u32 stk16_off = (__u32)&per_cpu(cpu_16bit_stack, cpu); + struct Xgt_desc_struct *cpu_gdt_descr = &per_cpu(cpu_gdt_descr, cpu); if (cpu_test_and_set(cpu, cpu_initialized)) { printk(KERN_WARNING "CPU#%d already initialized!\n", cpu); @@ -590,6 +595,25 @@ void __devinit cpu_init(void) } /* + * This is a horrible hack to allocate the GDT. The problem + * is that cpu_init() is called really early for the boot CPU + * (and hence needs bootmem) but much later for the secondary + * CPUs, when bootmem will have gone away + */ + if (NODE_DATA(0)->bdata->node_bootmem_map) { + gdt = (struct desc_struct *)alloc_bootmem_pages(PAGE_SIZE); + /* alloc_bootmem_pages panics on failure, so no check */ + memset(gdt, 0, PAGE_SIZE); + } else { + gdt = (struct desc_struct *)get_zeroed_page(GFP_KERNEL); + if (unlikely(!gdt)) { + printk(KERN_CRIT "CPU%d failed to allocate GDT\n", cpu); + for (;;) + local_irq_enable(); + } + } + + /* * Initialize the per-CPU GDT with the boot GDT, * and set up the GDT descriptor: */ @@ -601,10 +625,10 @@ void __devinit cpu_init(void) ((((__u64)stk16_off) << 32) & 0xff00000000000000ULL) | (CPU_16BIT_STACK_SIZE - 1); - cpu_gdt_descr[cpu].size = GDT_SIZE - 1; - cpu_gdt_descr[cpu].address = (unsigned long)gdt; + cpu_gdt_descr->size = GDT_SIZE - 1; + cpu_gdt_descr->address = (unsigned long)gdt; - load_gdt(&cpu_gdt_descr[cpu]); + load_gdt(cpu_gdt_descr); load_idt(&idt_descr); /* diff --git a/arch/i386/kernel/efi.c b/arch/i386/kernel/efi.c index ecad519fd395..e3e42fd62401 100644 --- a/arch/i386/kernel/efi.c +++ b/arch/i386/kernel/efi.c @@ -103,17 +103,19 @@ static void efi_call_phys_prelog(void) */ local_flush_tlb(); - cpu_gdt_descr[0].address = __pa(cpu_gdt_descr[0].address); - load_gdt((struct Xgt_desc_struct *) __pa(&cpu_gdt_descr[0])); + per_cpu(cpu_gdt_descr, 0).address = + __pa(per_cpu(cpu_gdt_descr, 0).address); + load_gdt((struct Xgt_desc_struct *)__pa(&per_cpu(cpu_gdt_descr, 0))); } static void efi_call_phys_epilog(void) { unsigned long cr4; - cpu_gdt_descr[0].address = - (unsigned long) __va(cpu_gdt_descr[0].address); - load_gdt(&cpu_gdt_descr[0]); + per_cpu(cpu_gdt_descr, 0).address = + (unsigned long)__va(per_cpu(cpu_gdt_descr, 0).address); + load_gdt((struct Xgt_desc_struct *)__va(&per_cpu(cpu_gdt_descr, 0))); + cr4 = read_cr4(); if (cr4 & X86_CR4_PSE) { diff --git a/arch/i386/kernel/head.S b/arch/i386/kernel/head.S index 2bee6499edd9..e0b7c632efbc 100644 --- a/arch/i386/kernel/head.S +++ b/arch/i386/kernel/head.S @@ -534,5 +534,3 @@ ENTRY(cpu_gdt_table) .quad 0x0000000000000000 /* 0xf0 - unused */ .quad 0x0000000000000000 /* 0xf8 - GDT entry 31: double-fault TSS */ - /* Be sure this is zeroed to avoid false validations in Xen */ - .fill PAGE_SIZE_asm / 8 - GDT_ENTRIES,8,0 diff --git a/arch/i386/kernel/i386_ksyms.c b/arch/i386/kernel/i386_ksyms.c index 3999bec50c33..055325056a74 100644 --- a/arch/i386/kernel/i386_ksyms.c +++ b/arch/i386/kernel/i386_ksyms.c @@ -3,8 +3,6 @@ #include <asm/checksum.h> #include <asm/desc.h> -EXPORT_SYMBOL_GPL(cpu_gdt_descr); - EXPORT_SYMBOL(__down_failed); EXPORT_SYMBOL(__down_failed_interruptible); EXPORT_SYMBOL(__down_failed_trylock); diff --git a/arch/i386/kernel/io_apic.c b/arch/i386/kernel/io_apic.c index f2dd218d88cb..235822b3f41b 100644 --- a/arch/i386/kernel/io_apic.c +++ b/arch/i386/kernel/io_apic.c @@ -2566,8 +2566,10 @@ int __init io_apic_get_unique_id (int ioapic, int apic_id) spin_unlock_irqrestore(&ioapic_lock, flags); /* Sanity check */ - if (reg_00.bits.ID != apic_id) - panic("IOAPIC[%d]: Unable change apic_id!\n", ioapic); + if (reg_00.bits.ID != apic_id) { + printk("IOAPIC[%d]: Unable to change apic_id!\n", ioapic); + return -1; + } } apic_printk(APIC_VERBOSE, KERN_INFO diff --git a/arch/i386/kernel/kprobes.c b/arch/i386/kernel/kprobes.c index 6483eeb1a4e8..694a13997637 100644 --- a/arch/i386/kernel/kprobes.c +++ b/arch/i386/kernel/kprobes.c @@ -58,6 +58,11 @@ static inline int is_IF_modifier(kprobe_opcode_t opcode) int __kprobes arch_prepare_kprobe(struct kprobe *p) { + /* insn: must be on special executable page on i386. */ + p->ainsn.insn = get_insn_slot(); + if (!p->ainsn.insn) + return -ENOMEM; + memcpy(p->ainsn.insn, p->addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t)); p->opcode = *p->addr; return 0; @@ -77,6 +82,13 @@ void __kprobes arch_disarm_kprobe(struct kprobe *p) (unsigned long) p->addr + sizeof(kprobe_opcode_t)); } +void __kprobes arch_remove_kprobe(struct kprobe *p) +{ + down(&kprobe_mutex); + free_insn_slot(p->ainsn.insn); + up(&kprobe_mutex); +} + static inline void save_previous_kprobe(struct kprobe_ctlblk *kcb) { kcb->prev_kprobe.kp = kprobe_running(); @@ -111,7 +123,7 @@ static inline void prepare_singlestep(struct kprobe *p, struct pt_regs *regs) if (p->opcode == BREAKPOINT_INSTRUCTION) regs->eip = (unsigned long)p->addr; else - regs->eip = (unsigned long)&p->ainsn.insn; + regs->eip = (unsigned long)p->ainsn.insn; } /* Called with kretprobe_lock held */ @@ -351,7 +363,7 @@ static void __kprobes resume_execution(struct kprobe *p, { unsigned long *tos = (unsigned long *)®s->esp; unsigned long next_eip = 0; - unsigned long copy_eip = (unsigned long)&p->ainsn.insn; + unsigned long copy_eip = (unsigned long)p->ainsn.insn; unsigned long orig_eip = (unsigned long)p->addr; switch (p->ainsn.insn[0]) { diff --git a/arch/i386/kernel/mpparse.c b/arch/i386/kernel/mpparse.c index e7609abf3796..e6e2f43db85e 100644 --- a/arch/i386/kernel/mpparse.c +++ b/arch/i386/kernel/mpparse.c @@ -915,6 +915,7 @@ void __init mp_register_ioapic ( u32 gsi_base) { int idx = 0; + int tmpid; if (nr_ioapics >= MAX_IO_APICS) { printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded " @@ -935,9 +936,14 @@ void __init mp_register_ioapic ( set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address); if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && (boot_cpu_data.x86 < 15)) - mp_ioapics[idx].mpc_apicid = io_apic_get_unique_id(idx, id); + tmpid = io_apic_get_unique_id(idx, id); else - mp_ioapics[idx].mpc_apicid = id; + tmpid = id; + if (tmpid == -1) { + nr_ioapics--; + return; + } + mp_ioapics[idx].mpc_apicid = tmpid; mp_ioapics[idx].mpc_apicver = io_apic_get_version(idx); /* diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c index fb00ab7b7612..eba7f53f8b4a 100644 --- a/arch/i386/kernel/smpboot.c +++ b/arch/i386/kernel/smpboot.c @@ -898,12 +898,6 @@ static int __devinit do_boot_cpu(int apicid, int cpu) unsigned long start_eip; unsigned short nmi_high = 0, nmi_low = 0; - if (!cpu_gdt_descr[cpu].address && - !(cpu_gdt_descr[cpu].address = get_zeroed_page(GFP_KERNEL))) { - printk("Failed to allocate GDT for CPU %d\n", cpu); - return 1; - } - ++cpucount; /* diff --git a/arch/i386/mach-default/topology.c b/arch/i386/kernel/topology.c index b64314069e78..67a0e1baa28b 100644 --- a/arch/i386/mach-default/topology.c +++ b/arch/i386/kernel/topology.c @@ -1,12 +1,12 @@ /* - * arch/i386/mach-generic/topology.c - Populate driverfs with topology information + * arch/i386/kernel/topology.c - Populate driverfs with topology information * * Written by: Matthew Dobson, IBM Corporation * Original Code: Paul Dorwin, IBM Corporation, Patrick Mochel, OSDL * * Copyright (C) 2002, IBM Corp. * - * All rights reserved. + * All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -34,7 +34,7 @@ static struct i386_cpu cpu_devices[NR_CPUS]; int arch_register_cpu(int num){ struct node *parent = NULL; - + #ifdef CONFIG_NUMA int node = cpu_to_node(num); if (node_online(node)) diff --git a/arch/i386/mach-default/Makefile b/arch/i386/mach-default/Makefile index e95bb0237921..012fe34459e6 100644 --- a/arch/i386/mach-default/Makefile +++ b/arch/i386/mach-default/Makefile @@ -2,4 +2,4 @@ # Makefile for the linux kernel. # -obj-y := setup.o topology.o +obj-y := setup.o diff --git a/arch/i386/mach-voyager/voyager_basic.c b/arch/i386/mach-voyager/voyager_basic.c index aa49a33a572c..b584060ec004 100644 --- a/arch/i386/mach-voyager/voyager_basic.c +++ b/arch/i386/mach-voyager/voyager_basic.c @@ -23,6 +23,8 @@ #include <linux/delay.h> #include <linux/reboot.h> #include <linux/sysrq.h> +#include <linux/smp.h> +#include <linux/nodemask.h> #include <asm/io.h> #include <asm/voyager.h> #include <asm/vic.h> @@ -328,4 +330,3 @@ void machine_power_off(void) if (pm_power_off) pm_power_off(); } - diff --git a/arch/i386/mach-voyager/voyager_smp.c b/arch/i386/mach-voyager/voyager_smp.c index 6e4c3baef6cc..8165626a5c30 100644 --- a/arch/i386/mach-voyager/voyager_smp.c +++ b/arch/i386/mach-voyager/voyager_smp.c @@ -402,6 +402,7 @@ find_smp_config(void) cpus_addr(phys_cpu_present_map)[0] |= voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK + 1) << 8; cpus_addr(phys_cpu_present_map)[0] |= voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK + 2) << 16; cpus_addr(phys_cpu_present_map)[0] |= voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK + 3) << 24; + cpu_possible_map = phys_cpu_present_map; printk("VOYAGER SMP: phys_cpu_present_map = 0x%lx\n", cpus_addr(phys_cpu_present_map)[0]); /* Here we set up the VIC to enable SMP */ /* enable the CPIs by writing the base vector to their register */ diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 845cd0902a50..a85ea9d37f05 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -453,6 +453,7 @@ source "arch/ia64/oprofile/Kconfig" config KPROBES bool "Kprobes (EXPERIMENTAL)" + depends on EXPERIMENTAL && MODULES help Kprobes allows you to trap at almost any kernel address and execute a callback function. register_kprobe() establishes diff --git a/arch/m32r/Makefile b/arch/m32r/Makefile index 983d438b14b6..4b3c90ba926c 100644 --- a/arch/m32r/Makefile +++ b/arch/m32r/Makefile @@ -12,14 +12,14 @@ CFLAGS_MODULE += -mmodel=large ifdef CONFIG_CHIP_VDEC2 cflags-$(CONFIG_ISA_M32R2) += -DNO_FPU -Wa,-bitinst -aflags-$(CONFIG_ISA_M32R2) += -DNO_FPU -Wa,-bitinst +aflags-$(CONFIG_ISA_M32R2) += -DNO_FPU -O2 -Wa,-bitinst -Wa,-no-parallel else cflags-$(CONFIG_ISA_M32R2) += -DNO_FPU -m32r2 -aflags-$(CONFIG_ISA_M32R2) += -DNO_FPU -m32r2 +aflags-$(CONFIG_ISA_M32R2) += -DNO_FPU -m32r2 -O2 endif cflags-$(CONFIG_ISA_M32R) += -DNO_FPU -aflags-$(CONFIG_ISA_M32R) += -DNO_FPU -Wa,-no-bitinst +aflags-$(CONFIG_ISA_M32R) += -DNO_FPU -O2 -Wa,-no-bitinst CFLAGS += $(cflags-y) AFLAGS += $(aflags-y) diff --git a/arch/m32r/kernel/signal.c b/arch/m32r/kernel/signal.c index 71763f7a1d19..cb33097fefc4 100644 --- a/arch/m32r/kernel/signal.c +++ b/arch/m32r/kernel/signal.c @@ -36,7 +36,7 @@ int do_signal(struct pt_regs *, sigset_t *); asmlinkage int sys_rt_sigsuspend(sigset_t *unewset, size_t sigsetsize, unsigned long r2, unsigned long r3, unsigned long r4, - unsigned long r5, unsigned long r6, struct pt_regs regs) + unsigned long r5, unsigned long r6, struct pt_regs *regs) { sigset_t saveset, newset; @@ -54,21 +54,21 @@ sys_rt_sigsuspend(sigset_t *unewset, size_t sigsetsize, recalc_sigpending(); spin_unlock_irq(¤t->sighand->siglock); - regs.r0 = -EINTR; + regs->r0 = -EINTR; while (1) { current->state = TASK_INTERRUPTIBLE; schedule(); - if (do_signal(®s, &saveset)) - return regs.r0; + if (do_signal(regs, &saveset)) + return regs->r0; } } asmlinkage int sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss, unsigned long r2, unsigned long r3, unsigned long r4, - unsigned long r5, unsigned long r6, struct pt_regs regs) + unsigned long r5, unsigned long r6, struct pt_regs *regs) { - return do_sigaltstack(uss, uoss, regs.spu); + return do_sigaltstack(uss, uoss, regs->spu); } @@ -140,11 +140,10 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, asmlinkage int sys_rt_sigreturn(unsigned long r0, unsigned long r1, unsigned long r2, unsigned long r3, unsigned long r4, - unsigned long r5, unsigned long r6, struct pt_regs regs) + unsigned long r5, unsigned long r6, struct pt_regs *regs) { - struct rt_sigframe __user *frame = (struct rt_sigframe __user *)regs.spu; + struct rt_sigframe __user *frame = (struct rt_sigframe __user *)regs->spu; sigset_t set; - stack_t st; int result; if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) @@ -158,14 +157,11 @@ sys_rt_sigreturn(unsigned long r0, unsigned long r1, recalc_sigpending(); spin_unlock_irq(¤t->sighand->siglock); - if (restore_sigcontext(®s, &frame->uc.uc_mcontext, &result)) + if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &result)) goto badframe; - if (__copy_from_user(&st, &frame->uc.uc_stack, sizeof(st))) + if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->spu) == -EFAULT) goto badframe; - /* It is more difficult to avoid calling this function than to - call it and ignore errors. */ - do_sigaltstack(&st, NULL, regs.spu); return result; diff --git a/arch/m32r/lib/usercopy.c b/arch/m32r/lib/usercopy.c index ce16bbe26a52..2d1dd2106c4d 100644 --- a/arch/m32r/lib/usercopy.c +++ b/arch/m32r/lib/usercopy.c @@ -64,7 +64,7 @@ do { \ " .balign 4\n" \ " .long 0b,3b\n" \ ".previous" \ - : "=r"(res), "=r"(count), "=&r" (__d0), "=&r" (__d1), \ + : "=&r"(res), "=&r"(count), "=&r" (__d0), "=&r" (__d1), \ "=&r" (__d2) \ : "i"(-EFAULT), "0"(count), "1"(count), "3"(src), \ "4"(dst) \ @@ -101,7 +101,7 @@ do { \ " .balign 4\n" \ " .long 0b,3b\n" \ ".previous" \ - : "=r"(res), "=r"(count), "=&r" (__d0), "=&r" (__d1), \ + : "=&r"(res), "=&r"(count), "=&r" (__d0), "=&r" (__d1), \ "=&r" (__d2) \ : "i"(-EFAULT), "0"(count), "1"(count), "3"(src), \ "4"(dst) \ diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S index d83e033dbc87..2f2dc54b2e26 100644 --- a/arch/mips/kernel/scall32-o32.S +++ b/arch/mips/kernel/scall32-o32.S @@ -626,7 +626,7 @@ einval: li v0, -EINVAL sys sys_fstatat64 4 sys sys_unlinkat 3 sys sys_renameat 4 /* 4295 */ - sys sys_linkat 4 + sys sys_linkat 5 sys sys_symlinkat 3 sys sys_readlinkat 4 sys sys_fchmodat 3 diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 80d114a3a837..a834f9e0bbb3 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -963,7 +963,7 @@ source "arch/powerpc/oprofile/Kconfig" config KPROBES bool "Kprobes (EXPERIMENTAL)" - depends on PPC64 + depends on PPC64 && EXPERIMENTAL && MODULES help Kprobes allows you to trap at almost any kernel address and execute a callback function. register_kprobe() establishes diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig index d6fed3f56580..2c3fd2007676 100644 --- a/arch/powerpc/configs/g5_defconfig +++ b/arch/powerpc/configs/g5_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc5 -# Tue Dec 20 15:59:30 2005 +# Linux kernel version: 2.6.16-rc2 +# Fri Feb 10 17:33:08 2006 # CONFIG_PPC64=y CONFIG_64BIT=y @@ -16,6 +16,10 @@ CONFIG_COMPAT=y CONFIG_SYSVIPC_COMPAT=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +# CONFIG_PPC_UDBG_16550 is not set +CONFIG_GENERIC_TBSYNC=y +# CONFIG_DEFAULT_UIMAGE is not set # # Processor support @@ -26,13 +30,12 @@ CONFIG_PPC_FPU=y CONFIG_ALTIVEC=y CONFIG_PPC_STD_MMU=y CONFIG_SMP=y -CONFIG_NR_CPUS=2 +CONFIG_NR_CPUS=4 # # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -47,8 +50,6 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_CPUSETS is not set @@ -58,8 +59,10 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -68,8 +71,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -112,13 +117,12 @@ CONFIG_PPC_PMAC=y CONFIG_PPC_PMAC64=y # CONFIG_PPC_MAPLE is not set # CONFIG_PPC_CELL is not set -CONFIG_PPC_OF=y CONFIG_U3_DART=y CONFIG_MPIC=y # CONFIG_PPC_RTAS is not set # CONFIG_MMIO_NVRAM is not set +CONFIG_MPIC_BROKEN_U3=y # CONFIG_PPC_MPC106 is not set -CONFIG_GENERIC_TBSYNC=y CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_TABLE=y # CONFIG_CPU_FREQ_DEBUG is not set @@ -151,6 +155,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_IOMMU_VMERGE=y # CONFIG_HOTPLUG_CPU is not set CONFIG_KEXEC=y +# CONFIG_CRASH_DUMP is not set CONFIG_IRQ_ALL_CPUS=y # CONFIG_NUMA is not set CONFIG_ARCH_SELECT_MEMORY_MODEL=y @@ -202,6 +207,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -239,6 +245,7 @@ CONFIG_NETFILTER=y # Core Netfilter Configuration # # CONFIG_NETFILTER_NETLINK is not set +# CONFIG_NETFILTER_XTABLES is not set # # IP: Netfilter Configuration @@ -255,65 +262,6 @@ CONFIG_IP_NF_TFTP=m CONFIG_IP_NF_AMANDA=m # CONFIG_IP_NF_PPTP is not set CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_REALM=m -CONFIG_IP_NF_MATCH_SCTP=m -# CONFIG_IP_NF_MATCH_DCCP is not set -CONFIG_IP_NF_MATCH_COMMENT=m -CONFIG_IP_NF_MATCH_CONNMARK=m -CONFIG_IP_NF_MATCH_CONNBYTES=m -CONFIG_IP_NF_MATCH_HASHLIMIT=m -CONFIG_IP_NF_MATCH_STRING=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_TARGET_NFQUEUE=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_CLASSIFY=m -CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_TARGET_CONNMARK=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_TARGET_NOTRACK=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m # # DCCP Configuration (EXPERIMENTAL) @@ -324,6 +272,11 @@ CONFIG_IP_NF_ARP_MANGLE=m # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -342,7 +295,6 @@ CONFIG_LLC=y # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set -CONFIG_NET_CLS_ROUTE=y # # Network testing @@ -545,13 +497,7 @@ CONFIG_SCSI_SATA_SVW=y # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set -CONFIG_SCSI_QLA2XXX=y -# CONFIG_SCSI_QLA21XX is not set -# CONFIG_SCSI_QLA22XX is not set -# CONFIG_SCSI_QLA2300 is not set -# CONFIG_SCSI_QLA2322 is not set -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -614,7 +560,6 @@ CONFIG_IEEE1394_SBP2=m CONFIG_IEEE1394_ETH1394=m CONFIG_IEEE1394_DV1394=m CONFIG_IEEE1394_RAWIO=y -# CONFIG_IEEE1394_CMP is not set # # I2O device support @@ -630,6 +575,7 @@ CONFIG_THERM_PM72=y CONFIG_WINDFARM=y CONFIG_WINDFARM_PM81=y CONFIG_WINDFARM_PM91=y +CONFIG_WINDFARM_PM112=y # # Network device support @@ -682,8 +628,9 @@ CONFIG_E1000=y # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set -CONFIG_TIGON3=m +CONFIG_TIGON3=y # CONFIG_BNX2 is not set # CONFIG_MV643XX_ETH is not set @@ -861,8 +808,7 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set # CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_KEYWEST=y -CONFIG_I2C_PMAC_SMU=y +CONFIG_I2C_POWERMAC=y # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set @@ -895,6 +841,12 @@ CONFIG_I2C_PMAC_SMU=y # CONFIG_I2C_DEBUG_CHIP is not set # +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# # Dallas's 1-wire bus # # CONFIG_W1 is not set @@ -961,7 +913,6 @@ CONFIG_FB_RADEON_I2C=y # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_VIRTUAL is not set @@ -1008,9 +959,10 @@ CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set -CONFIG_SND_GENERIC_DRIVER=y # # Generic devices @@ -1024,6 +976,8 @@ CONFIG_SND_GENERIC_DRIVER=y # # PCI devices # +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_ALS4000 is not set # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ATIIXP is not set # CONFIG_SND_ATIIXP_MODEM is not set @@ -1032,39 +986,38 @@ CONFIG_SND_GENERIC_DRIVER=y # CONFIG_SND_AU8830 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set -# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMIPCI is not set # CONFIG_SND_CS4281 is not set +# CONFIG_SND_CS46XX is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set -# CONFIG_SND_CA0106 is not set -# CONFIG_SND_KORG1212 is not set -# CONFIG_SND_MIXART is not set -# CONFIG_SND_NM256 is not set -# CONFIG_SND_RME32 is not set -# CONFIG_SND_RME96 is not set -# CONFIG_SND_RME9652 is not set -# CONFIG_SND_HDSP is not set -# CONFIG_SND_HDSPM is not set -# CONFIG_SND_TRIDENT is not set -# CONFIG_SND_YMFPCI is not set -# CONFIG_SND_AD1889 is not set -# CONFIG_SND_ALS4000 is not set -# CONFIG_SND_CMIPCI is not set # CONFIG_SND_ENS1370 is not set # CONFIG_SND_ENS1371 is not set # CONFIG_SND_ES1938 is not set # CONFIG_SND_ES1968 is not set -# CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_FM801 is not set +# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set # CONFIG_SND_INTEL8X0 is not set # CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_PCXHR is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set # CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_TRIDENT is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VIA82XX_MODEM is not set # CONFIG_SND_VX222 is not set -# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_YMFPCI is not set # # ALSA PowerMac devices @@ -1136,13 +1089,16 @@ CONFIG_USB_STORAGE_DPCM=y CONFIG_USB_STORAGE_SDDR09=y CONFIG_USB_STORAGE_SDDR55=y CONFIG_USB_STORAGE_JUMPSHOT=y +# CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_LIBUSUAL is not set # # USB Input Devices # CONFIG_USB_HID=y CONFIG_USB_HIDINPUT=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set CONFIG_HID_FF=y CONFIG_HID_PID=y CONFIG_LOGITECH_FF=y @@ -1159,6 +1115,7 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set @@ -1207,6 +1164,7 @@ CONFIG_USB_SERIAL_GENERIC=y # CONFIG_USB_SERIAL_AIRPRIME is not set # CONFIG_USB_SERIAL_ANYDATA is not set CONFIG_USB_SERIAL_BELKIN=m +# CONFIG_USB_SERIAL_WHITEHEAT is not set CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m # CONFIG_USB_SERIAL_CP2101 is not set CONFIG_USB_SERIAL_CYPRESS_M8=m @@ -1288,6 +1246,10 @@ CONFIG_USB_EZUSB=y # # +# EDAC - error detection and reporting (RAS) +# + +# # File systems # CONFIG_EXT2_FS=y @@ -1317,6 +1279,7 @@ CONFIG_XFS_EXPORT=y CONFIG_XFS_SECURITY=y CONFIG_XFS_POSIX_ACL=y # CONFIG_XFS_RT is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -1357,6 +1320,7 @@ CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y # CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -1426,6 +1390,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # @@ -1481,10 +1446,6 @@ CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m # # Instrumentation Support @@ -1497,24 +1458,31 @@ CONFIG_OPROFILE=y # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=17 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set CONFIG_DEBUG_FS=y # CONFIG_DEBUG_VM is not set +CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUGGER is not set CONFIG_IRQSTACKS=y CONFIG_BOOTX_TEXT=y +# CONFIG_PPC_EARLY_DEBUG_LPAR is not set +# CONFIG_PPC_EARLY_DEBUG_G5 is not set +# CONFIG_PPC_EARLY_DEBUG_RTAS is not set +# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set +# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set # # Security options diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig index 6f6c6bed1aa5..0362a70aa97c 100644 --- a/arch/powerpc/configs/ppc64_defconfig +++ b/arch/powerpc/configs/ppc64_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc5 -# Tue Dec 20 15:59:38 2005 +# Linux kernel version: 2.6.16-rc2 +# Fri Feb 10 17:32:14 2006 # CONFIG_PPC64=y CONFIG_64BIT=y @@ -16,6 +16,10 @@ CONFIG_COMPAT=y CONFIG_SYSVIPC_COMPAT=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_PPC_UDBG_16550=y +CONFIG_GENERIC_TBSYNC=y +# CONFIG_DEFAULT_UIMAGE is not set # # Processor support @@ -33,7 +37,6 @@ CONFIG_NR_CPUS=32 # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -48,8 +51,6 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_CPUSETS=y @@ -59,8 +60,10 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -69,8 +72,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -113,7 +118,6 @@ CONFIG_PPC_PMAC=y CONFIG_PPC_PMAC64=y CONFIG_PPC_MAPLE=y # CONFIG_PPC_CELL is not set -CONFIG_PPC_OF=y CONFIG_XICS=y CONFIG_U3_DART=y CONFIG_MPIC=y @@ -124,8 +128,8 @@ CONFIG_RTAS_FLASH=m # CONFIG_MMIO_NVRAM is not set CONFIG_MPIC_BROKEN_U3=y CONFIG_IBMVIO=y +# CONFIG_IBMEBUS is not set # CONFIG_PPC_MPC106 is not set -CONFIG_GENERIC_TBSYNC=y CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_TABLE=y # CONFIG_CPU_FREQ_DEBUG is not set @@ -158,6 +162,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_IOMMU_VMERGE=y CONFIG_HOTPLUG_CPU=y CONFIG_KEXEC=y +# CONFIG_CRASH_DUMP is not set CONFIG_IRQ_ALL_CPUS=y CONFIG_PPC_SPLPAR=y CONFIG_EEH=y @@ -178,6 +183,7 @@ CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_EXTREME=y # CONFIG_MEMORY_HOTPLUG is not set CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_PPC_64K_PAGES is not set # CONFIG_SCHED_SMT is not set CONFIG_PROC_DEVICETREE=y @@ -221,6 +227,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -260,6 +267,7 @@ CONFIG_NETFILTER=y CONFIG_NETFILTER_NETLINK=y CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m +# CONFIG_NETFILTER_XTABLES is not set # # IP: Netfilter Configuration @@ -277,65 +285,6 @@ CONFIG_IP_NF_TFTP=m CONFIG_IP_NF_AMANDA=m # CONFIG_IP_NF_PPTP is not set CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_REALM=m -CONFIG_IP_NF_MATCH_SCTP=m -CONFIG_IP_NF_MATCH_DCCP=m -CONFIG_IP_NF_MATCH_COMMENT=m -CONFIG_IP_NF_MATCH_CONNMARK=m -CONFIG_IP_NF_MATCH_CONNBYTES=m -CONFIG_IP_NF_MATCH_HASHLIMIT=m -CONFIG_IP_NF_MATCH_STRING=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_TARGET_NFQUEUE=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_CLASSIFY=m -CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_TARGET_CONNMARK=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_TARGET_NOTRACK=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m # # DCCP Configuration (EXPERIMENTAL) @@ -346,6 +295,11 @@ CONFIG_IP_NF_ARP_MANGLE=m # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -364,7 +318,6 @@ CONFIG_LLC=y # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set -CONFIG_NET_CLS_ROUTE=y # # Network testing @@ -572,13 +525,7 @@ CONFIG_SCSI_IPR_TRACE=y CONFIG_SCSI_IPR_DUMP=y # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set -CONFIG_SCSI_QLA2XXX=y -CONFIG_SCSI_QLA21XX=m -CONFIG_SCSI_QLA22XX=m -CONFIG_SCSI_QLA2300=m -CONFIG_SCSI_QLA2322=m -CONFIG_SCSI_QLA6312=m -CONFIG_SCSI_QLA24XX=m +# CONFIG_SCSI_QLA_FC is not set CONFIG_SCSI_LPFC=m # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -642,8 +589,6 @@ CONFIG_IEEE1394_SBP2=m CONFIG_IEEE1394_ETH1394=m CONFIG_IEEE1394_DV1394=m CONFIG_IEEE1394_RAWIO=y -CONFIG_IEEE1394_CMP=m -CONFIG_IEEE1394_AMDTP=m # # I2O device support @@ -659,6 +604,7 @@ CONFIG_THERM_PM72=y CONFIG_WINDFARM=y CONFIG_WINDFARM_PM81=y CONFIG_WINDFARM_PM91=y +CONFIG_WINDFARM_PM112=y # # Network device support @@ -731,6 +677,7 @@ CONFIG_E1000=y # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y @@ -853,6 +800,7 @@ CONFIG_HW_CONSOLE=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # @@ -880,6 +828,7 @@ CONFIG_HVCS=m # CONFIG_WATCHDOG is not set # CONFIG_RTC is not set CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -923,8 +872,7 @@ CONFIG_I2C_AMD8111=y # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set # CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_KEYWEST=y -CONFIG_I2C_PMAC_SMU=y +CONFIG_I2C_POWERMAC=y # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set @@ -957,6 +905,12 @@ CONFIG_I2C_PMAC_SMU=y # CONFIG_I2C_DEBUG_CHIP is not set # +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# # Dallas's 1-wire bus # # CONFIG_W1 is not set @@ -1028,7 +982,6 @@ CONFIG_FB_RADEON_I2C=y # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_VIRTUAL is not set @@ -1073,9 +1026,10 @@ CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set -CONFIG_SND_GENERIC_DRIVER=y # # Generic devices @@ -1089,6 +1043,8 @@ CONFIG_SND_GENERIC_DRIVER=y # # PCI devices # +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_ALS4000 is not set # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ATIIXP is not set # CONFIG_SND_ATIIXP_MODEM is not set @@ -1097,39 +1053,38 @@ CONFIG_SND_GENERIC_DRIVER=y # CONFIG_SND_AU8830 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set -# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMIPCI is not set # CONFIG_SND_CS4281 is not set +# CONFIG_SND_CS46XX is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set -# CONFIG_SND_CA0106 is not set -# CONFIG_SND_KORG1212 is not set -# CONFIG_SND_MIXART is not set -# CONFIG_SND_NM256 is not set -# CONFIG_SND_RME32 is not set -# CONFIG_SND_RME96 is not set -# CONFIG_SND_RME9652 is not set -# CONFIG_SND_HDSP is not set -# CONFIG_SND_HDSPM is not set -# CONFIG_SND_TRIDENT is not set -# CONFIG_SND_YMFPCI is not set -# CONFIG_SND_AD1889 is not set -# CONFIG_SND_ALS4000 is not set -# CONFIG_SND_CMIPCI is not set # CONFIG_SND_ENS1370 is not set # CONFIG_SND_ENS1371 is not set # CONFIG_SND_ES1938 is not set # CONFIG_SND_ES1968 is not set -# CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_FM801 is not set +# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set # CONFIG_SND_INTEL8X0 is not set # CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_PCXHR is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set # CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_TRIDENT is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VIA82XX_MODEM is not set # CONFIG_SND_VX222 is not set -# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_YMFPCI is not set # # ALSA PowerMac devices @@ -1201,13 +1156,16 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_LIBUSUAL is not set # # USB Input Devices # CONFIG_USB_HID=y CONFIG_USB_HIDINPUT=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set # CONFIG_HID_FF is not set CONFIG_USB_HIDDEV=y # CONFIG_USB_AIPTEK is not set @@ -1221,6 +1179,7 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set @@ -1307,6 +1266,10 @@ CONFIG_INFINIBAND_IPOIB=m # # +# EDAC - error detection and reporting (RAS) +# + +# # File systems # CONFIG_EXT2_FS=y @@ -1340,6 +1303,7 @@ CONFIG_XFS_EXPORT=y CONFIG_XFS_SECURITY=y CONFIG_XFS_POSIX_ACL=y # CONFIG_XFS_RT is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -1379,6 +1343,7 @@ CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y # CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -1449,6 +1414,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # @@ -1504,10 +1470,6 @@ CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m # # Instrumentation Support @@ -1520,18 +1482,20 @@ CONFIG_OPROFILE=y # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=17 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set CONFIG_DEBUG_FS=y # CONFIG_DEBUG_VM is not set +CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_DEBUG_STACK_USAGE=y @@ -1540,6 +1504,11 @@ CONFIG_XMON=y # CONFIG_XMON_DEFAULT is not set CONFIG_IRQSTACKS=y CONFIG_BOOTX_TEXT=y +# CONFIG_PPC_EARLY_DEBUG_LPAR is not set +# CONFIG_PPC_EARLY_DEBUG_G5 is not set +# CONFIG_PPC_EARLY_DEBUG_RTAS is not set +# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set +# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set # # Security options diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig index aa9893a1f6e8..daaf038a1faa 100644 --- a/arch/powerpc/configs/pseries_defconfig +++ b/arch/powerpc/configs/pseries_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc5 -# Tue Dec 20 15:59:40 2005 +# Linux kernel version: 2.6.16-rc2 +# Fri Feb 10 17:33:32 2006 # CONFIG_PPC64=y CONFIG_64BIT=y @@ -16,6 +16,10 @@ CONFIG_COMPAT=y CONFIG_SYSVIPC_COMPAT=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_PPC_UDBG_16550=y +# CONFIG_GENERIC_TBSYNC is not set +# CONFIG_DEFAULT_UIMAGE is not set # # Processor support @@ -33,7 +37,6 @@ CONFIG_NR_CPUS=128 # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -49,8 +52,6 @@ CONFIG_POSIX_MQUEUE=y CONFIG_SYSCTL=y CONFIG_AUDIT=y CONFIG_AUDITSYSCALL=y -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_CPUSETS=y @@ -60,8 +61,10 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -70,8 +73,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -113,7 +118,6 @@ CONFIG_PPC_PSERIES=y # CONFIG_PPC_PMAC is not set # CONFIG_PPC_MAPLE is not set # CONFIG_PPC_CELL is not set -CONFIG_PPC_OF=y CONFIG_XICS=y # CONFIG_U3_DART is not set CONFIG_MPIC=y @@ -123,8 +127,8 @@ CONFIG_RTAS_PROC=y CONFIG_RTAS_FLASH=m # CONFIG_MMIO_NVRAM is not set CONFIG_IBMVIO=y +# CONFIG_IBMEBUS is not set # CONFIG_PPC_MPC106 is not set -# CONFIG_GENERIC_TBSYNC is not set # CONFIG_CPU_FREQ is not set # CONFIG_WANT_EARLY_SERIAL is not set @@ -145,6 +149,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_IOMMU_VMERGE=y CONFIG_HOTPLUG_CPU=y CONFIG_KEXEC=y +# CONFIG_CRASH_DUMP is not set CONFIG_IRQ_ALL_CPUS=y CONFIG_PPC_SPLPAR=y CONFIG_EEH=y @@ -165,6 +170,7 @@ CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_EXTREME=y # CONFIG_MEMORY_HOTPLUG is not set CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y # CONFIG_PPC_64K_PAGES is not set CONFIG_SCHED_SMT=y @@ -209,6 +215,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -248,6 +255,7 @@ CONFIG_NETFILTER=y CONFIG_NETFILTER_NETLINK=y CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m +# CONFIG_NETFILTER_XTABLES is not set # # IP: Netfilter Configuration @@ -265,65 +273,6 @@ CONFIG_IP_NF_TFTP=m CONFIG_IP_NF_AMANDA=m # CONFIG_IP_NF_PPTP is not set CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_REALM=m -CONFIG_IP_NF_MATCH_SCTP=m -# CONFIG_IP_NF_MATCH_DCCP is not set -CONFIG_IP_NF_MATCH_COMMENT=m -CONFIG_IP_NF_MATCH_CONNMARK=m -CONFIG_IP_NF_MATCH_CONNBYTES=m -CONFIG_IP_NF_MATCH_HASHLIMIT=m -CONFIG_IP_NF_MATCH_STRING=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_TARGET_NFQUEUE=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_CLASSIFY=m -CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_TARGET_CONNMARK=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_TARGET_NOTRACK=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m # # DCCP Configuration (EXPERIMENTAL) @@ -334,6 +283,11 @@ CONFIG_IP_NF_ARP_MANGLE=m # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -352,7 +306,6 @@ CONFIG_LLC=y # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set -CONFIG_NET_CLS_ROUTE=y # # Network testing @@ -550,13 +503,7 @@ CONFIG_SCSI_IPR_TRACE=y CONFIG_SCSI_IPR_DUMP=y # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set -CONFIG_SCSI_QLA2XXX=y -CONFIG_SCSI_QLA21XX=m -CONFIG_SCSI_QLA22XX=m -CONFIG_SCSI_QLA2300=m -CONFIG_SCSI_QLA2322=m -CONFIG_SCSI_QLA6312=m -CONFIG_SCSI_QLA24XX=m +# CONFIG_SCSI_QLA_FC is not set CONFIG_SCSI_LPFC=m # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -678,6 +625,7 @@ CONFIG_E1000=y # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y @@ -803,6 +751,7 @@ CONFIG_HW_CONSOLE=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # @@ -909,6 +858,12 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_DEBUG_CHIP is not set # +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# # Dallas's 1-wire bus # # CONFIG_W1 is not set @@ -976,7 +931,6 @@ CONFIG_FB_RADEON_I2C=y # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_VIRTUAL is not set @@ -1061,12 +1015,15 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_LIBUSUAL is not set # # USB Input Devices # CONFIG_USB_HID=y CONFIG_USB_HIDINPUT=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set # CONFIG_HID_FF is not set CONFIG_USB_HIDDEV=y # CONFIG_USB_AIPTEK is not set @@ -1080,6 +1037,7 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set @@ -1167,6 +1125,10 @@ CONFIG_INFINIBAND_IPOIB=m # # +# EDAC - error detection and reporting (RAS) +# + +# # File systems # CONFIG_EXT2_FS=y @@ -1200,6 +1162,7 @@ CONFIG_XFS_EXPORT=y CONFIG_XFS_SECURITY=y CONFIG_XFS_POSIX_ACL=y # CONFIG_XFS_RT is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -1240,6 +1203,7 @@ CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y # CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -1351,10 +1315,6 @@ CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m # # Instrumentation Support @@ -1367,18 +1327,20 @@ CONFIG_OPROFILE=y # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=17 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set CONFIG_DEBUG_FS=y # CONFIG_DEBUG_VM is not set +CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_DEBUG_STACK_USAGE=y @@ -1387,6 +1349,11 @@ CONFIG_XMON=y CONFIG_XMON_DEFAULT=y CONFIG_IRQSTACKS=y # CONFIG_BOOTX_TEXT is not set +# CONFIG_PPC_EARLY_DEBUG_LPAR is not set +# CONFIG_PPC_EARLY_DEBUG_G5 is not set +# CONFIG_PPC_EARLY_DEBUG_RTAS is not set +# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set +# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set # # Security options diff --git a/arch/powerpc/kernel/crash.c b/arch/powerpc/kernel/crash.c index 8c21d378f5d2..778f22fd85d2 100644 --- a/arch/powerpc/kernel/crash.c +++ b/arch/powerpc/kernel/crash.c @@ -134,8 +134,10 @@ static void crash_kexec_prepare_cpus(void) * the crash CPU will send an IPI and wait for other CPUs to * respond. If not, proceed the kexec boot even though we failed to * capture other CPU states. + * Delay of at least 10 seconds. */ - msecs = 1000000; + printk(KERN_ALERT "Sending IPI to other cpus...\n"); + msecs = 10000; while ((atomic_read(&waiting_for_crash_ipi) > 0) && (--msecs > 0)) { barrier(); mdelay(1); diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S index 03b25f9359f8..a0579e859b21 100644 --- a/arch/powerpc/kernel/head_32.S +++ b/arch/powerpc/kernel/head_32.S @@ -714,6 +714,7 @@ AltiVecUnavailable: #ifdef CONFIG_ALTIVEC bne load_up_altivec /* if from user, just load it up */ #endif /* CONFIG_ALTIVEC */ + addi r3,r1,STACK_FRAME_OVERHEAD EXC_XFER_EE_LITE(0xf20, altivec_unavailable_exception) PerformanceMonitor: diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index 2b03a09fe5e9..11f2cd5af7dc 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -139,7 +139,7 @@ _GLOBAL(__secondary_hold) ori r24,r24,MSR_RI mtmsrd r24 /* RI on */ - /* Grab our linux cpu number */ + /* Grab our physical cpu number */ mr r24,r3 /* Tell the master cpu we're here */ @@ -153,11 +153,7 @@ _GLOBAL(__secondary_hold) cmpdi 0,r4,1 bne 100b -#ifdef CONFIG_HMT - SET_REG_IMMEDIATE(r4, .hmt_init) - mtctr r4 - bctr -#elif defined(CONFIG_SMP) || defined(CONFIG_KEXEC) +#if defined(CONFIG_SMP) || defined(CONFIG_KEXEC) LOAD_REG_IMMEDIATE(r4, .pSeries_secondary_smp_init) mtctr r4 mr r3,r24 @@ -319,7 +315,6 @@ exception_marker: label##_pSeries: \ HMT_MEDIUM; \ mtspr SPRN_SPRG1,r13; /* save r13 */ \ - RUNLATCH_ON(r13); \ EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common) #define STD_EXCEPTION_ISERIES(n, label, area) \ @@ -327,7 +322,6 @@ label##_pSeries: \ label##_iSeries: \ HMT_MEDIUM; \ mtspr SPRN_SPRG1,r13; /* save r13 */ \ - RUNLATCH_ON(r13); \ EXCEPTION_PROLOG_ISERIES_1(area); \ EXCEPTION_PROLOG_ISERIES_2; \ b label##_common @@ -337,7 +331,6 @@ label##_iSeries: \ label##_iSeries: \ HMT_MEDIUM; \ mtspr SPRN_SPRG1,r13; /* save r13 */ \ - RUNLATCH_ON(r13); \ EXCEPTION_PROLOG_ISERIES_1(PACA_EXGEN); \ lbz r10,PACAPROCENABLED(r13); \ cmpwi 0,r10,0; \ @@ -390,6 +383,7 @@ label##_common: \ label##_common: \ EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \ DISABLE_INTS; \ + bl .ppc64_runlatch_on; \ addi r3,r1,STACK_FRAME_OVERHEAD; \ bl hdlr; \ b .ret_from_except_lite @@ -407,7 +401,6 @@ __start_interrupts: _machine_check_pSeries: HMT_MEDIUM mtspr SPRN_SPRG1,r13 /* save r13 */ - RUNLATCH_ON(r13) EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common) . = 0x300 @@ -434,7 +427,6 @@ END_FTR_SECTION_IFCLR(CPU_FTR_SLB) data_access_slb_pSeries: HMT_MEDIUM mtspr SPRN_SPRG1,r13 - RUNLATCH_ON(r13) mfspr r13,SPRN_SPRG3 /* get paca address into r13 */ std r3,PACA_EXSLB+EX_R3(r13) mfspr r3,SPRN_DAR @@ -460,7 +452,6 @@ data_access_slb_pSeries: instruction_access_slb_pSeries: HMT_MEDIUM mtspr SPRN_SPRG1,r13 - RUNLATCH_ON(r13) mfspr r13,SPRN_SPRG3 /* get paca address into r13 */ std r3,PACA_EXSLB+EX_R3(r13) mfspr r3,SPRN_SRR0 /* SRR0 is faulting address */ @@ -491,7 +482,6 @@ instruction_access_slb_pSeries: .globl system_call_pSeries system_call_pSeries: HMT_MEDIUM - RUNLATCH_ON(r9) mr r9,r13 mfmsr r10 mfspr r13,SPRN_SPRG3 @@ -575,7 +565,6 @@ slb_miss_user_pseries: system_reset_fwnmi: HMT_MEDIUM mtspr SPRN_SPRG1,r13 /* save r13 */ - RUNLATCH_ON(r13) EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common) .globl machine_check_fwnmi @@ -583,7 +572,6 @@ system_reset_fwnmi: machine_check_fwnmi: HMT_MEDIUM mtspr SPRN_SPRG1,r13 /* save r13 */ - RUNLATCH_ON(r13) EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common) #ifdef CONFIG_PPC_ISERIES @@ -894,7 +882,6 @@ unrecov_fer: .align 7 .globl data_access_common data_access_common: - RUNLATCH_ON(r10) /* It wont fit in the 0x300 handler */ mfspr r10,SPRN_DAR std r10,PACA_EXGEN+EX_DAR(r13) mfspr r10,SPRN_DSISR @@ -1042,6 +1029,7 @@ hardware_interrupt_common: EXCEPTION_PROLOG_COMMON(0x500, PACA_EXGEN) hardware_interrupt_entry: DISABLE_INTS + bl .ppc64_runlatch_on addi r3,r1,STACK_FRAME_OVERHEAD bl .do_IRQ b .ret_from_except_lite @@ -1816,22 +1804,6 @@ _STATIC(start_here_multiplatform) ori r6,r6,MSR_RI mtmsrd r6 /* RI on */ -#ifdef CONFIG_HMT - /* Start up the second thread on cpu 0 */ - mfspr r3,SPRN_PVR - srwi r3,r3,16 - cmpwi r3,0x34 /* Pulsar */ - beq 90f - cmpwi r3,0x36 /* Icestar */ - beq 90f - cmpwi r3,0x37 /* SStar */ - beq 90f - b 91f /* HMT not supported */ -90: li r3,0 - bl .hmt_start_secondary -91: -#endif - /* The following gets the stack and TOC set up with the regs */ /* pointing to the real addr of the kernel stack. This is */ /* all done to support the C function call below which sets */ @@ -1945,77 +1917,8 @@ _STATIC(start_here_common) bl .start_kernel -_GLOBAL(hmt_init) -#ifdef CONFIG_HMT - LOAD_REG_IMMEDIATE(r5, hmt_thread_data) - mfspr r7,SPRN_PVR - srwi r7,r7,16 - cmpwi r7,0x34 /* Pulsar */ - beq 90f - cmpwi r7,0x36 /* Icestar */ - beq 91f - cmpwi r7,0x37 /* SStar */ - beq 91f - b 101f -90: mfspr r6,SPRN_PIR - andi. r6,r6,0x1f - b 92f -91: mfspr r6,SPRN_PIR - andi. r6,r6,0x3ff -92: sldi r4,r24,3 - stwx r6,r5,r4 - bl .hmt_start_secondary - b 101f - -__hmt_secondary_hold: - LOAD_REG_IMMEDIATE(r5, hmt_thread_data) - clrldi r5,r5,4 - li r7,0 - mfspr r6,SPRN_PIR - mfspr r8,SPRN_PVR - srwi r8,r8,16 - cmpwi r8,0x34 - bne 93f - andi. r6,r6,0x1f - b 103f -93: andi. r6,r6,0x3f - -103: lwzx r8,r5,r7 - cmpw r8,r6 - beq 104f - addi r7,r7,8 - b 103b - -104: addi r7,r7,4 - lwzx r9,r5,r7 - mr r24,r9 -101: -#endif - mr r3,r24 - b .pSeries_secondary_smp_init - -#ifdef CONFIG_HMT -_GLOBAL(hmt_start_secondary) - LOAD_REG_IMMEDIATE(r4,__hmt_secondary_hold) - clrldi r4,r4,4 - mtspr SPRN_NIADORM, r4 - mfspr r4, SPRN_MSRDORM - li r5, -65 - and r4, r4, r5 - mtspr SPRN_MSRDORM, r4 - lis r4,0xffef - ori r4,r4,0x7403 - mtspr SPRN_TSC, r4 - li r4,0x1f4 - mtspr SPRN_TST, r4 - mfspr r4, SPRN_HID0 - ori r4, r4, 0x1 - mtspr SPRN_HID0, r4 - mfspr r4, SPRN_CTRLF - oris r4, r4, 0x40 - mtspr SPRN_CTRLT, r4 - blr -#endif + /* Not reached */ + BUG_OPCODE /* * We put a few things here that have to be page-aligned. diff --git a/arch/powerpc/kernel/machine_kexec_64.c b/arch/powerpc/kernel/machine_kexec_64.c index d6431440c54f..ee166c586642 100644 --- a/arch/powerpc/kernel/machine_kexec_64.c +++ b/arch/powerpc/kernel/machine_kexec_64.c @@ -26,8 +26,6 @@ #include <asm/prom.h> #include <asm/smp.h> -#define HASH_GROUP_SIZE 0x80 /* size of each hash group, asm/mmu.h */ - int default_machine_kexec_prepare(struct kimage *image) { int i; @@ -61,7 +59,7 @@ int default_machine_kexec_prepare(struct kimage *image) */ if (htab_address) { low = __pa(htab_address); - high = low + (htab_hash_mask + 1) * HASH_GROUP_SIZE; + high = low + htab_size_bytes; for (i = 0; i < image->nr_segments; i++) { begin = image->segment[i].mem; @@ -294,7 +292,7 @@ void default_machine_kexec(struct kimage *image) } /* Values we need to export to the second kernel via the device tree. */ -static unsigned long htab_base, htab_size, kernel_end; +static unsigned long htab_base, kernel_end; static struct property htab_base_prop = { .name = "linux,htab-base", @@ -305,7 +303,7 @@ static struct property htab_base_prop = { static struct property htab_size_prop = { .name = "linux,htab-size", .length = sizeof(unsigned long), - .value = (unsigned char *)&htab_size, + .value = (unsigned char *)&htab_size_bytes, }; static struct property kernel_end_prop = { @@ -331,8 +329,6 @@ static void __init export_htab_values(void) htab_base = __pa(htab_address); prom_add_property(node, &htab_base_prop); - - htab_size = 1UL << ppc64_pft_size; prom_add_property(node, &htab_size_prop); out: diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 57703994a063..c225cf154bfe 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -888,3 +888,35 @@ void dump_stack(void) show_stack(current, NULL); } EXPORT_SYMBOL(dump_stack); + +#ifdef CONFIG_PPC64 +void ppc64_runlatch_on(void) +{ + unsigned long ctrl; + + if (cpu_has_feature(CPU_FTR_CTRL) && !test_thread_flag(TIF_RUNLATCH)) { + HMT_medium(); + + ctrl = mfspr(SPRN_CTRLF); + ctrl |= CTRL_RUNLATCH; + mtspr(SPRN_CTRLT, ctrl); + + set_thread_flag(TIF_RUNLATCH); + } +} + +void ppc64_runlatch_off(void) +{ + unsigned long ctrl; + + if (cpu_has_feature(CPU_FTR_CTRL) && test_thread_flag(TIF_RUNLATCH)) { + HMT_medium(); + + clear_thread_flag(TIF_RUNLATCH); + + ctrl = mfspr(SPRN_CTRLF); + ctrl &= ~CTRL_RUNLATCH; + mtspr(SPRN_CTRLT, ctrl); + } +} +#endif diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index 294832a7e0a6..6dbd21726770 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -816,8 +816,6 @@ void __init unflatten_device_tree(void) { unsigned long start, mem, size; struct device_node **allnextp = &allnodes; - char *p = NULL; - int l = 0; DBG(" -> unflatten_device_tree()\n"); @@ -857,19 +855,6 @@ void __init unflatten_device_tree(void) if (of_chosen == NULL) of_chosen = of_find_node_by_path("/chosen@0"); - /* Retreive command line */ - if (of_chosen != NULL) { - p = (char *)get_property(of_chosen, "bootargs", &l); - if (p != NULL && l > 0) - strlcpy(cmd_line, p, min(l, COMMAND_LINE_SIZE)); - } -#ifdef CONFIG_CMDLINE - if (l == 0 || (l == 1 && (*p) == 0)) - strlcpy(cmd_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE); -#endif /* CONFIG_CMDLINE */ - - DBG("Command line is: %s\n", cmd_line); - DBG(" <- unflatten_device_tree()\n"); } @@ -940,6 +925,8 @@ static int __init early_init_dt_scan_chosen(unsigned long node, { u32 *prop; unsigned long *lprop; + unsigned long l; + char *p; DBG("search \"chosen\", depth: %d, uname: %s\n", depth, uname); @@ -1004,6 +991,41 @@ static int __init early_init_dt_scan_chosen(unsigned long node, crashk_res.end = crashk_res.start + *lprop - 1; #endif + /* Retreive command line */ + p = of_get_flat_dt_prop(node, "bootargs", &l); + if (p != NULL && l > 0) + strlcpy(cmd_line, p, min((int)l, COMMAND_LINE_SIZE)); + +#ifdef CONFIG_CMDLINE + if (l == 0 || (l == 1 && (*p) == 0)) + strlcpy(cmd_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE); +#endif /* CONFIG_CMDLINE */ + + DBG("Command line is: %s\n", cmd_line); + + if (strstr(cmd_line, "mem=")) { + char *p, *q; + unsigned long maxmem = 0; + + for (q = cmd_line; (p = strstr(q, "mem=")) != 0; ) { + q = p + 4; + if (p > cmd_line && p[-1] != ' ') + continue; + maxmem = simple_strtoul(q, &q, 0); + if (*q == 'k' || *q == 'K') { + maxmem <<= 10; + ++q; + } else if (*q == 'm' || *q == 'M') { + maxmem <<= 20; + ++q; + } else if (*q == 'g' || *q == 'G') { + maxmem <<= 30; + ++q; + } + } + memory_limit = maxmem; + } + /* break now */ return 1; } @@ -1124,7 +1146,7 @@ static void __init early_reserve_mem(void) size_32 = *(reserve_map_32++); if (size_32 == 0) break; - DBG("reserving: %lx -> %lx\n", base_32, size_32); + DBG("reserving: %x -> %x\n", base_32, size_32); lmb_reserve(base_32, size_32); } return; diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index ec7153f4d47c..d34fe537400e 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -205,14 +205,6 @@ static cell_t __initdata regbuf[1024]; #define MAX_CPU_THREADS 2 -/* TO GO */ -#ifdef CONFIG_HMT -struct { - unsigned int pir; - unsigned int threadid; -} hmt_thread_data[NR_CPUS]; -#endif /* CONFIG_HMT */ - /* * Error results ... some OF calls will return "-1" on error, some * will return 0, some will return either. To simplify, here are @@ -1319,10 +1311,6 @@ static void __init prom_hold_cpus(void) */ *spinloop = 0; -#ifdef CONFIG_HMT - for (i = 0; i < NR_CPUS; i++) - RELOC(hmt_thread_data)[i].pir = 0xdeadbeef; -#endif /* look for cpus */ for (node = 0; prom_next_node(&node); ) { type[0] = 0; @@ -1389,32 +1377,6 @@ static void __init prom_hold_cpus(void) /* Reserve cpu #s for secondary threads. They start later. */ cpuid += cpu_threads; } -#ifdef CONFIG_HMT - /* Only enable HMT on processors that provide support. */ - if (__is_processor(PV_PULSAR) || - __is_processor(PV_ICESTAR) || - __is_processor(PV_SSTAR)) { - prom_printf(" starting secondary threads\n"); - - for (i = 0; i < NR_CPUS; i += 2) { - if (!cpu_online(i)) - continue; - - if (i == 0) { - unsigned long pir = mfspr(SPRN_PIR); - if (__is_processor(PV_PULSAR)) { - RELOC(hmt_thread_data)[i].pir = - pir & 0x1f; - } else { - RELOC(hmt_thread_data)[i].pir = - pir & 0x3ff; - } - } - } - } else { - prom_printf("Processor is not HMT capable\n"); - } -#endif if (cpuid > NR_CPUS) prom_printf("WARNING: maximum CPUs (" __stringify(NR_CPUS) diff --git a/arch/powerpc/mm/hash_native_64.c b/arch/powerpc/mm/hash_native_64.c index d96bcfe4c6f6..33654d1b1b43 100644 --- a/arch/powerpc/mm/hash_native_64.c +++ b/arch/powerpc/mm/hash_native_64.c @@ -403,12 +403,17 @@ static void native_hpte_clear(void) */ hpte_v = hptep->v; + /* + * Call __tlbie() here rather than tlbie() since we + * already hold the native_tlbie_lock. + */ if (hpte_v & HPTE_V_VALID) { hptep->v = 0; - tlbie(slot2va(hpte_v, slot), MMU_PAGE_4K, 0); + __tlbie(slot2va(hpte_v, slot), MMU_PAGE_4K); } } + asm volatile("eieio; tlbsync; ptesync":::"memory"); spin_unlock(&native_tlbie_lock); local_irq_restore(flags); } diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index 149351a84b94..b1f614c612dd 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -88,6 +88,7 @@ static unsigned long _SDR1; struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT]; hpte_t *htab_address; +unsigned long htab_size_bytes; unsigned long htab_hash_mask; int mmu_linear_psize = MMU_PAGE_4K; int mmu_virtual_psize = MMU_PAGE_4K; @@ -399,7 +400,7 @@ void create_section_mapping(unsigned long start, unsigned long end) void __init htab_initialize(void) { - unsigned long table, htab_size_bytes; + unsigned long table; unsigned long pteg_count; unsigned long mode_rw; unsigned long base = 0, size = 0; diff --git a/arch/powerpc/oprofile/Kconfig b/arch/powerpc/oprofile/Kconfig index eb2dece76a54..d03c0e5ca870 100644 --- a/arch/powerpc/oprofile/Kconfig +++ b/arch/powerpc/oprofile/Kconfig @@ -1,4 +1,5 @@ config PROFILING + depends on !PPC_ISERIES bool "Profiling support (EXPERIMENTAL)" help Say Y here to enable the extended profiling support mechanisms used diff --git a/arch/powerpc/platforms/iseries/lpevents.c b/arch/powerpc/platforms/iseries/lpevents.c index 0b885300d1d1..8ca7b9396355 100644 --- a/arch/powerpc/platforms/iseries/lpevents.c +++ b/arch/powerpc/platforms/iseries/lpevents.c @@ -184,6 +184,8 @@ void setup_hvlpevent_queue(void) { void *eventStack; + spin_lock_init(&hvlpevent_queue.lock); + /* Allocate a page for the Event Stack. */ eventStack = alloc_bootmem_pages(LpEventStackSize); memset(eventStack, 0, LpEventStackSize); diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c index 3f8790146b00..3ecc4a652d82 100644 --- a/arch/powerpc/platforms/iseries/setup.c +++ b/arch/powerpc/platforms/iseries/setup.c @@ -648,6 +648,7 @@ static void yield_shared_processor(void) * here and let the timer_interrupt code sort out the actual time. */ get_lppaca()->int_dword.fields.decr_int = 1; + ppc64_runlatch_on(); process_iSeries_events(); } diff --git a/arch/powerpc/platforms/maple/pci.c b/arch/powerpc/platforms/maple/pci.c index 7d4099a34f92..85d6c93659cc 100644 --- a/arch/powerpc/platforms/maple/pci.c +++ b/arch/powerpc/platforms/maple/pci.c @@ -435,8 +435,8 @@ void __init maple_pci_init(void) PCI_DN(np)->busno = 0xf0; } - /* Tell pci.c to use the common resource allocation mecanism */ - pci_probe_only = 0; + /* Tell pci.c to not change any resource allocations. */ + pci_probe_only = 1; /* Allow all IO */ io_page_mask = -1; diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig index e3fc3407bb1f..4e5c8f8d869d 100644 --- a/arch/powerpc/platforms/pseries/Kconfig +++ b/arch/powerpc/platforms/pseries/Kconfig @@ -9,13 +9,6 @@ config PPC_SPLPAR processors, that is, which share physical processors between two or more partitions. -config HMT - bool "Hardware multithreading" - depends on SMP && PPC_PSERIES && BROKEN - help - This option enables hardware multithreading on RS64 cpus. - pSeries systems p620 and p660 have such a cpu type. - config EEH bool "PCI Extended Error Handling (EEH)" if EMBEDDED depends on PPC_PSERIES diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index 4f26304d0263..7dcdfcb3c984 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -234,7 +234,7 @@ static void mpic_shutdown_ht_interrupt(struct mpic *mpic, unsigned int source, spin_lock_irqsave(&mpic->fixup_lock, flags); writeb(0x10 + 2 * fixup->index, fixup->base + 2); tmp = readl(fixup->base + 4); - tmp &= ~1U; + tmp |= 1; writel(tmp, fixup->base + 4); spin_unlock_irqrestore(&mpic->fixup_lock, flags); } @@ -446,14 +446,15 @@ static unsigned int mpic_startup_irq(unsigned int irq) #ifdef CONFIG_MPIC_BROKEN_U3 struct mpic *mpic = mpic_from_irq(irq); unsigned int src = irq - mpic->irq_offset; +#endif /* CONFIG_MPIC_BROKEN_U3 */ + + mpic_enable_irq(irq); +#ifdef CONFIG_MPIC_BROKEN_U3 if (mpic_is_ht_interrupt(mpic, src)) mpic_startup_ht_interrupt(mpic, src, irq_desc[irq].status); - #endif /* CONFIG_MPIC_BROKEN_U3 */ - mpic_enable_irq(irq); - return 0; } diff --git a/arch/ppc/kernel/head.S b/arch/ppc/kernel/head.S index c5a890dca9cf..53ea845fb911 100644 --- a/arch/ppc/kernel/head.S +++ b/arch/ppc/kernel/head.S @@ -751,6 +751,7 @@ AltiVecUnavailable: #ifdef CONFIG_ALTIVEC bne load_up_altivec /* if from user, just load it up */ #endif /* CONFIG_ALTIVEC */ + addi r3,r1,STACK_FRAME_OVERHEAD EXC_XFER_EE_LITE(0xf20, altivec_unavailable_exception) #ifdef CONFIG_PPC64BRIDGE diff --git a/arch/ppc/xmon/adb.c b/arch/ppc/xmon/adb.c deleted file mode 100644 index e91384dcccac..000000000000 --- a/arch/ppc/xmon/adb.c +++ /dev/null @@ -1,212 +0,0 @@ -/* - * Copyright (C) 1996 Paul Mackerras. - */ -#include "nonstdio.h" -#include "privinst.h" - -#define scanhex xmon_scanhex -#define skipbl xmon_skipbl - -#define ADB_B (*(volatile unsigned char *)0xf3016000) -#define ADB_SR (*(volatile unsigned char *)0xf3017400) -#define ADB_ACR (*(volatile unsigned char *)0xf3017600) -#define ADB_IFR (*(volatile unsigned char *)0xf3017a00) - -static inline void eieio(void) { asm volatile ("eieio" : :); } - -#define N_ADB_LOG 1000 -struct adb_log { - unsigned char b; - unsigned char ifr; - unsigned char acr; - unsigned int time; -} adb_log[N_ADB_LOG]; -int n_adb_log; - -void -init_adb_log(void) -{ - adb_log[0].b = ADB_B; - adb_log[0].ifr = ADB_IFR; - adb_log[0].acr = ADB_ACR; - adb_log[0].time = get_dec(); - n_adb_log = 0; -} - -void -dump_adb_log(void) -{ - unsigned t, t0; - struct adb_log *ap; - int i; - - ap = adb_log; - t0 = ap->time; - for (i = 0; i <= n_adb_log; ++i, ++ap) { - t = t0 - ap->time; - printf("b=%x ifr=%x acr=%x at %d.%.7d\n", ap->b, ap->ifr, ap->acr, - t / 1000000000, (t % 1000000000) / 100); - } -} - -void -adb_chklog(void) -{ - struct adb_log *ap = &adb_log[n_adb_log + 1]; - - ap->b = ADB_B; - ap->ifr = ADB_IFR; - ap->acr = ADB_ACR; - if (ap->b != ap[-1].b || (ap->ifr & 4) != (ap[-1].ifr & 4) - || ap->acr != ap[-1].acr) { - ap->time = get_dec(); - ++n_adb_log; - } -} - -int -adb_bitwait(int bmask, int bval, int fmask, int fval) -{ - int i; - struct adb_log *ap; - - for (i = 10000; i > 0; --i) { - adb_chklog(); - ap = &adb_log[n_adb_log]; - if ((ap->b & bmask) == bval && (ap->ifr & fmask) == fval) - return 0; - } - return -1; -} - -int -adb_wait(void) -{ - if (adb_bitwait(0, 0, 4, 4) < 0) { - printf("adb: ready wait timeout\n"); - return -1; - } - return 0; -} - -void -adb_readin(void) -{ - int i, j; - unsigned char d[64]; - - if (ADB_B & 8) { - printf("ADB_B: %x\n", ADB_B); - return; - } - i = 0; - adb_wait(); - j = ADB_SR; - eieio(); - ADB_B &= ~0x20; - eieio(); - for (;;) { - if (adb_wait() < 0) - break; - d[i++] = ADB_SR; - eieio(); - if (ADB_B & 8) - break; - ADB_B ^= 0x10; - eieio(); - } - ADB_B |= 0x30; - if (adb_wait() == 0) - j = ADB_SR; - for (j = 0; j < i; ++j) - printf("%.2x ", d[j]); - printf("\n"); -} - -int -adb_write(unsigned char *d, int i) -{ - int j; - unsigned x; - - if ((ADB_B & 8) == 0) { - printf("r: "); - adb_readin(); - } - for (;;) { - ADB_ACR = 0x1c; - eieio(); - ADB_SR = d[0]; - eieio(); - ADB_B &= ~0x20; - eieio(); - if (ADB_B & 8) - break; - ADB_ACR = 0xc; - eieio(); - ADB_B |= 0x20; - eieio(); - adb_readin(); - } - adb_wait(); - for (j = 1; j < i; ++j) { - ADB_SR = d[j]; - eieio(); - ADB_B ^= 0x10; - eieio(); - if (adb_wait() < 0) - break; - } - ADB_ACR = 0xc; - eieio(); - x = ADB_SR; - eieio(); - ADB_B |= 0x30; - return j; -} - -void -adbcmds(void) -{ - char cmd; - unsigned rtcu, rtcl, dec, pdec, x; - int i, j; - unsigned char d[64]; - - cmd = skipbl(); - switch (cmd) { - case 't': - for (;;) { - rtcl = get_rtcl(); - rtcu = get_rtcu(); - dec = get_dec(); - printf("rtc u=%u l=%u dec=%x (%d = %d.%.7d)\n", - rtcu, rtcl, dec, pdec - dec, (pdec - dec) / 1000000000, - ((pdec - dec) % 1000000000) / 100); - pdec = dec; - if (cmd == 'x') - break; - while (xmon_read(stdin, &cmd, 1) != 1) - ; - } - break; - case 'r': - init_adb_log(); - while (adb_bitwait(8, 0, 0, 0) == 0) - adb_readin(); - break; - case 'w': - i = 0; - while (scanhex(&x)) - d[i++] = x; - init_adb_log(); - j = adb_write(d, i); - printf("sent %d bytes\n", j); - while (adb_bitwait(8, 0, 0, 0) == 0) - adb_readin(); - break; - case 'l': - dump_adb_log(); - break; - } -} diff --git a/arch/ppc/xmon/start.c b/arch/ppc/xmon/start.c index 484f5bb1aa3e..ff86b2d814cb 100644 --- a/arch/ppc/xmon/start.c +++ b/arch/ppc/xmon/start.c @@ -6,16 +6,11 @@ #include <asm/machdep.h> #include <asm/io.h> #include <asm/page.h> -#include <linux/adb.h> -#include <linux/pmu.h> -#include <linux/cuda.h> #include <linux/kernel.h> #include <linux/errno.h> #include <linux/sysrq.h> #include <linux/bitops.h> #include <asm/xmon.h> -#include <asm/prom.h> -#include <asm/bootx.h> #include <asm/machdep.h> #include <asm/errno.h> #include <asm/processor.h> @@ -26,9 +21,7 @@ static volatile unsigned char *sccc, *sccd; unsigned int TXRDY, RXRDY, DLAB; static int xmon_expect(const char *str, unsigned int timeout); -static int use_screen; static int via_modem; -static int xmon_use_sccb; #define TB_SPEED 25000000 @@ -46,47 +39,6 @@ void buf_access(void) sccd[3] &= ~DLAB; /* reset DLAB */ } -extern int adb_init(void); - -#ifdef CONFIG_PPC_CHRP -/* - * This looks in the "ranges" property for the primary PCI host bridge - * to find the physical address of the start of PCI/ISA I/O space. - * It is basically a cut-down version of pci_process_bridge_OF_ranges. - */ -static unsigned long chrp_find_phys_io_base(void) -{ - struct device_node *node; - unsigned int *ranges; - unsigned long base = CHRP_ISA_IO_BASE; - int rlen = 0; - int np; - - node = find_devices("isa"); - if (node != NULL) { - node = node->parent; - if (node == NULL || node->type == NULL - || strcmp(node->type, "pci") != 0) - node = NULL; - } - if (node == NULL) - node = find_devices("pci"); - if (node == NULL) - return base; - - ranges = (unsigned int *) get_property(node, "ranges", &rlen); - np = prom_n_addr_cells(node) + 5; - while ((rlen -= np * sizeof(unsigned int)) >= 0) { - if ((ranges[0] >> 24) == 1 && ranges[2] == 0) { - /* I/O space starting at 0, grab the phys base */ - base = ranges[np - 3]; - break; - } - ranges += np; - } - return base; -} -#endif /* CONFIG_PPC_CHRP */ #ifdef CONFIG_MAGIC_SYSRQ static void sysrq_handle_xmon(int key, struct pt_regs *regs, @@ -109,22 +61,6 @@ xmon_map_scc(void) #ifdef CONFIG_PPC_MULTIPLATFORM volatile unsigned char *base; -#ifdef CONFIG_PPC_CHRP - base = (volatile unsigned char *) isa_io_base; - if (_machine == _MACH_chrp) - base = (volatile unsigned char *) - ioremap(chrp_find_phys_io_base(), 0x1000); - - sccc = base + 0x3fd; - sccd = base + 0x3f8; - if (xmon_use_sccb) { - sccc -= 0x100; - sccd -= 0x100; - } - TXRDY = 0x20; - RXRDY = 1; - DLAB = 0x80; -#endif /* CONFIG_PPC_CHRP */ #elif defined(CONFIG_GEMINI) /* should already be mapped by the kernel boot */ sccc = (volatile unsigned char *) 0xffeffb0d; @@ -143,7 +79,7 @@ xmon_map_scc(void) register_sysrq_key('x', &sysrq_xmon_op); } -static int scc_initialized = 0; +static int scc_initialized; void xmon_init_scc(void); @@ -163,14 +99,6 @@ xmon_write(void *handle, void *ptr, int nb) break; #endif -#ifdef CONFIG_BOOTX_TEXT - if (use_screen) { - /* write it on the screen */ - for (i = 0; i < nb; ++i) - btext_drawchar(*p++); - goto out; - } -#endif if (!scc_initialized) xmon_init_scc(); ct = 0; @@ -190,7 +118,6 @@ xmon_write(void *handle, void *ptr, int nb) eieio(); } - out: #ifdef CONFIG_SMP if (!locked) clear_bit(0, &xmon_write_lock); @@ -199,65 +126,7 @@ xmon_write(void *handle, void *ptr, int nb) } int xmon_wants_key; -int xmon_adb_keycode; - -#ifdef CONFIG_BOOTX_TEXT -static int xmon_adb_shiftstate; - -static unsigned char xmon_keytab[128] = - "asdfhgzxcv\000bqwer" /* 0x00 - 0x0f */ - "yt123465=97-80]o" /* 0x10 - 0x1f */ - "u[ip\rlj'k;\\,/nm." /* 0x20 - 0x2f */ - "\t `\177\0\033\0\0\0\0\0\0\0\0\0\0" /* 0x30 - 0x3f */ - "\0.\0*\0+\0\0\0\0\0/\r\0-\0" /* 0x40 - 0x4f */ - "\0\0000123456789\0\0\0"; /* 0x50 - 0x5f */ - -static unsigned char xmon_shift_keytab[128] = - "ASDFHGZXCV\000BQWER" /* 0x00 - 0x0f */ - "YT!@#$^%+(&_*)}O" /* 0x10 - 0x1f */ - "U{IP\rLJ\"K:|<?NM>" /* 0x20 - 0x2f */ - "\t ~\177\0\033\0\0\0\0\0\0\0\0\0\0" /* 0x30 - 0x3f */ - "\0.\0*\0+\0\0\0\0\0/\r\0-\0" /* 0x40 - 0x4f */ - "\0\0000123456789\0\0\0"; /* 0x50 - 0x5f */ - -static int -xmon_get_adb_key(void) -{ - int k, t, on; - xmon_wants_key = 1; - for (;;) { - xmon_adb_keycode = -1; - t = 0; - on = 0; - do { - if (--t < 0) { - on = 1 - on; - btext_drawchar(on? 0xdb: 0x20); - btext_drawchar('\b'); - t = 200000; - } - do_poll_adb(); - } while (xmon_adb_keycode == -1); - k = xmon_adb_keycode; - if (on) - btext_drawstring(" \b"); - - /* test for shift keys */ - if ((k & 0x7f) == 0x38 || (k & 0x7f) == 0x7b) { - xmon_adb_shiftstate = (k & 0x80) == 0; - continue; - } - if (k >= 0x80) - continue; /* ignore up transitions */ - k = (xmon_adb_shiftstate? xmon_shift_keytab: xmon_keytab)[k]; - if (k != 0) - break; - } - xmon_wants_key = 0; - return k; -} -#endif /* CONFIG_BOOTX_TEXT */ int xmon_read(void *handle, void *ptr, int nb) @@ -265,18 +134,11 @@ xmon_read(void *handle, void *ptr, int nb) char *p = ptr; int i; -#ifdef CONFIG_BOOTX_TEXT - if (use_screen) { - for (i = 0; i < nb; ++i) - *p++ = xmon_get_adb_key(); - return i; - } -#endif if (!scc_initialized) xmon_init_scc(); for (i = 0; i < nb; ++i) { while ((*sccc & RXRDY) == 0) - do_poll_adb(); + ; buf_access(); *p++ = *sccd; } @@ -287,7 +149,7 @@ int xmon_read_poll(void) { if ((*sccc & RXRDY) == 0) { - do_poll_adb(); + ; return -1; } buf_access(); @@ -297,15 +159,6 @@ xmon_read_poll(void) void xmon_init_scc(void) { - if ( _machine == _MACH_chrp ) - { - sccd[3] = 0x83; eieio(); /* LCR = 8N1 + DLAB */ - sccd[0] = 12; eieio(); /* DLL = 9600 baud */ - sccd[1] = 0; eieio(); - sccd[2] = 0; eieio(); /* FCR = 0 */ - sccd[3] = 3; eieio(); /* LCR = 8N1 */ - sccd[1] = 0; eieio(); /* IER = 0 */ - } scc_initialized = 1; if (via_modem) { for (;;) { @@ -321,22 +174,6 @@ xmon_init_scc(void) } } -#if 0 -extern int (*prom_entry)(void *); - -int -xmon_exit(void) -{ - struct prom_args { - char *service; - } args; - - for (;;) { - args.service = "exit"; - (*prom_entry)(&args); - } -} -#endif void *xmon_stdin; void *xmon_stdout; diff --git a/arch/ppc/xmon/xmon.c b/arch/ppc/xmon/xmon.c index bdaf6597b4c2..06fa44b5c647 100644 --- a/arch/ppc/xmon/xmon.c +++ b/arch/ppc/xmon/xmon.c @@ -12,8 +12,6 @@ #include <linux/kallsyms.h> #include <asm/ptrace.h> #include <asm/string.h> -#include <asm/prom.h> -#include <asm/bootx.h> #include <asm/machdep.h> #include <asm/xmon.h> #include "nonstdio.h" @@ -101,9 +99,6 @@ void cacheflush(void); static void cpu_cmd(void); #endif /* CONFIG_SMP */ static void csum(void); -#ifdef CONFIG_BOOTX_TEXT -static void vidcmds(void); -#endif static void bootcmds(void); static void proccall(void); static void printtime(void); @@ -522,11 +517,6 @@ cmds(struct pt_regs *excp) cpu_cmd(); break; #endif /* CONFIG_SMP */ -#ifdef CONFIG_BOOTX_TEXT - case 'v': - vidcmds(); - break; -#endif case 'z': bootcmds(); break; @@ -618,43 +608,6 @@ static void cpu_cmd(void) } #endif /* CONFIG_SMP */ -#ifdef CONFIG_BOOTX_TEXT -extern boot_infos_t disp_bi; - -static void vidcmds(void) -{ - int c = inchar(); - unsigned int val, w; - extern int boot_text_mapped; - - if (!boot_text_mapped) - return; - if (c != '\n' && scanhex(&val)) { - switch (c) { - case 'd': - w = disp_bi.dispDeviceRowBytes - / (disp_bi.dispDeviceDepth >> 3); - disp_bi.dispDeviceDepth = val; - disp_bi.dispDeviceRowBytes = w * (val >> 3); - return; - case 'p': - disp_bi.dispDeviceRowBytes = val; - return; - case 'w': - disp_bi.dispDeviceRect[2] = val; - return; - case 'h': - disp_bi.dispDeviceRect[3] = val; - return; - } - } - printf("W = %d (0x%x) H = %d (0x%x) D = %d (0x%x) P = %d (0x%x)\n", - disp_bi.dispDeviceRect[2], disp_bi.dispDeviceRect[2], - disp_bi.dispDeviceRect[3], disp_bi.dispDeviceRect[3], - disp_bi.dispDeviceDepth, disp_bi.dispDeviceDepth, - disp_bi.dispDeviceRowBytes, disp_bi.dispDeviceRowBytes); -} -#endif /* CONFIG_BOOTX_TEXT */ static unsigned short fcstab[256] = { 0x0000, 0x1189, 0x2312, 0x329b, 0x4624, 0x57ad, 0x6536, 0x74bf, @@ -1020,7 +973,6 @@ dump_hash_table(void) } #else -#ifndef CONFIG_PPC64BRIDGE static void dump_hash_table_seg(unsigned seg, unsigned start, unsigned end) { @@ -1079,66 +1031,6 @@ dump_hash_table_seg(unsigned seg, unsigned start, unsigned end) printf(" ... %x\n", last_va); } -#else /* CONFIG_PPC64BRIDGE */ -static void -dump_hash_table_seg(unsigned seg, unsigned start, unsigned end) -{ - extern void *Hash; - extern unsigned long Hash_size; - unsigned *htab = Hash; - unsigned hsize = Hash_size; - unsigned v, hmask, va, last_va; - int found, last_found, i; - unsigned *hg, w1, last_w2, last_va0; - - last_found = 0; - hmask = hsize / 128 - 1; - va = start; - start = (start >> 12) & 0xffff; - end = (end >> 12) & 0xffff; - for (v = start; v < end; ++v) { - found = 0; - hg = htab + (((v ^ seg) & hmask) * 32); - w1 = 1 | (seg << 12) | ((v & 0xf800) >> 4); - for (i = 0; i < 8; ++i, hg += 4) { - if (hg[1] == w1) { - found = 1; - break; - } - } - if (!found) { - w1 ^= 2; - hg = htab + ((~(v ^ seg) & hmask) * 32); - for (i = 0; i < 8; ++i, hg += 4) { - if (hg[1] == w1) { - found = 1; - break; - } - } - } - if (!(last_found && found && (hg[3] & ~0x180) == last_w2 + 4096)) { - if (last_found) { - if (last_va != last_va0) - printf(" ... %x", last_va); - printf("\n"); - } - if (found) { - printf("%x to %x", va, hg[3]); - last_va0 = va; - } - last_found = found; - } - if (found) { - last_w2 = hg[3] & ~0x180; - last_va = va; - } - va += 4096; - } - if (last_found) - printf(" ... %x\n", last_va); -} -#endif /* CONFIG_PPC64BRIDGE */ - static unsigned hash_ctx; static unsigned hash_start; static unsigned hash_end; diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S index 615964cca15f..50e80138e7ad 100644 --- a/arch/s390/kernel/compat_wrapper.S +++ b/arch/s390/kernel/compat_wrapper.S @@ -1552,6 +1552,7 @@ sys_linkat_wrapper: llgtr %r3,%r3 # const char * lgfr %r4,%r4 # int llgtr %r5,%r5 # const char * + lgfr %r6,%r6 # int jg sys_linkat .globl sys_symlinkat_wrapper diff --git a/arch/sparc64/Kconfig b/arch/sparc64/Kconfig index ab733be9af08..4c0a50a76554 100644 --- a/arch/sparc64/Kconfig +++ b/arch/sparc64/Kconfig @@ -383,6 +383,7 @@ source "arch/sparc64/oprofile/Kconfig" config KPROBES bool "Kprobes (EXPERIMENTAL)" + depends on EXPERIMENTAL && MODULES help Kprobes allows you to trap at almost any kernel address and execute a callback function. register_kprobe() establishes diff --git a/arch/sparc64/kernel/setup.c b/arch/sparc64/kernel/setup.c index 054461e6946d..158bd31e15b7 100644 --- a/arch/sparc64/kernel/setup.c +++ b/arch/sparc64/kernel/setup.c @@ -542,6 +542,8 @@ void __init setup_arch(char **cmdline_p) } #endif + smp_setup_cpu_possible_map(); + paging_init(); } diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index 1fb6323e65a4..1f7ad8a69052 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -1079,18 +1079,12 @@ int setup_profiling_timer(unsigned int multiplier) return 0; } +/* Constrain the number of cpus to max_cpus. */ void __init smp_prepare_cpus(unsigned int max_cpus) { - int instance, mid; - - instance = 0; - while (!cpu_find_by_instance(instance, NULL, &mid)) { - if (mid < max_cpus) - cpu_set(mid, phys_cpu_present_map); - instance++; - } - if (num_possible_cpus() > max_cpus) { + int instance, mid; + instance = 0; while (!cpu_find_by_instance(instance, NULL, &mid)) { if (mid != boot_cpu_id) { @@ -1105,6 +1099,22 @@ void __init smp_prepare_cpus(unsigned int max_cpus) smp_store_cpu_info(boot_cpu_id); } +/* Set this up early so that things like the scheduler can init + * properly. We use the same cpu mask for both the present and + * possible cpu map. + */ +void __init smp_setup_cpu_possible_map(void) +{ + int instance, mid; + + instance = 0; + while (!cpu_find_by_instance(instance, NULL, &mid)) { + if (mid < NR_CPUS) + cpu_set(mid, phys_cpu_present_map); + instance++; + } +} + void __devinit smp_prepare_boot_cpu(void) { if (hard_smp_processor_id() >= NR_CPUS) { diff --git a/arch/um/drivers/cow.h b/arch/um/drivers/cow.h index dc36b222100b..04e3958266e0 100644 --- a/arch/um/drivers/cow.h +++ b/arch/um/drivers/cow.h @@ -46,7 +46,7 @@ extern int file_reader(__u64 offset, char *buf, int len, void *arg); extern int read_cow_header(int (*reader)(__u64, char *, int, void *), void *arg, __u32 *version_out, char **backing_file_out, time_t *mtime_out, - unsigned long long *size_out, int *sectorsize_out, + __u64 *size_out, int *sectorsize_out, __u32 *align_out, int *bitmap_offset_out); extern int write_cow_header(char *cow_file, int fd, char *backing_file, diff --git a/arch/um/drivers/cow_sys.h b/arch/um/drivers/cow_sys.h index c83fc5d68936..94de4ead4f7a 100644 --- a/arch/um/drivers/cow_sys.h +++ b/arch/um/drivers/cow_sys.h @@ -23,17 +23,17 @@ static inline char *cow_strdup(char *str) return(uml_strdup(str)); } -static inline int cow_seek_file(int fd, unsigned long long offset) +static inline int cow_seek_file(int fd, __u64 offset) { return(os_seek_file(fd, offset)); } -static inline int cow_file_size(char *file, unsigned long long *size_out) +static inline int cow_file_size(char *file, __u64 *size_out) { return(os_file_size(file, size_out)); } -static inline int cow_write_file(int fd, char *buf, int size) +static inline int cow_write_file(int fd, void *buf, int size) { return(os_write_file(fd, buf, size)); } diff --git a/arch/um/drivers/cow_user.c b/arch/um/drivers/cow_user.c index fbe2217db5dd..61951b721268 100644 --- a/arch/um/drivers/cow_user.c +++ b/arch/um/drivers/cow_user.c @@ -176,7 +176,7 @@ int write_cow_header(char *cow_file, int fd, char *backing_file, err = -ENOMEM; header = cow_malloc(sizeof(*header)); if(header == NULL){ - cow_printf("Failed to allocate COW V3 header\n"); + cow_printf("write_cow_header - failed to allocate COW V3 header\n"); goto out; } header->magic = htonl(COW_MAGIC); @@ -196,15 +196,17 @@ int write_cow_header(char *cow_file, int fd, char *backing_file, err = os_file_modtime(header->backing_file, &modtime); if(err < 0){ - cow_printf("Backing file '%s' mtime request failed, " - "err = %d\n", header->backing_file, -err); + cow_printf("write_cow_header - backing file '%s' mtime " + "request failed, err = %d\n", header->backing_file, + -err); goto out_free; } err = cow_file_size(header->backing_file, size); if(err < 0){ - cow_printf("Couldn't get size of backing file '%s', " - "err = %d\n", header->backing_file, -err); + cow_printf("write_cow_header - couldn't get size of " + "backing file '%s', err = %d\n", + header->backing_file, -err); goto out_free; } @@ -214,10 +216,11 @@ int write_cow_header(char *cow_file, int fd, char *backing_file, header->alignment = htonl(alignment); header->cow_format = COW_BITMAP; - err = os_write_file(fd, header, sizeof(*header)); + err = cow_write_file(fd, header, sizeof(*header)); if(err != sizeof(*header)){ - cow_printf("Write of header to new COW file '%s' failed, " - "err = %d\n", cow_file, -err); + cow_printf("write_cow_header - write of header to " + "new COW file '%s' failed, err = %d\n", cow_file, + -err); goto out_free; } err = 0; @@ -299,7 +302,7 @@ int read_cow_header(int (*reader)(__u64, char *, int, void *), void *arg, } else if(version == 3){ if(n < sizeof(header->v3)){ - cow_printf("read_cow_header - failed to read V2 " + cow_printf("read_cow_header - failed to read V3 " "header\n"); goto out; } @@ -359,7 +362,8 @@ int init_cow_file(int fd, char *cow_file, char *backing_file, int sectorsize, if(err != sizeof(zero)){ cow_printf("Write of bitmap to new COW file '%s' failed, " "err = %d\n", cow_file, -err); - err = -EINVAL; + if (err >= 0) + err = -EINVAL; goto out; } diff --git a/arch/um/drivers/net_user.c b/arch/um/drivers/net_user.c index 098fa65981ab..0e2f06187ea7 100644 --- a/arch/um/drivers/net_user.c +++ b/arch/um/drivers/net_user.c @@ -47,10 +47,12 @@ void tap_check_ips(char *gate_addr, unsigned char *eth_addr) } } +/* Do reliable error handling as this fails frequently enough. */ void read_output(int fd, char *output, int len) { - int remain, n, actual; + int remain, ret, expected; char c; + char *str; if(output == NULL){ output = &c; @@ -58,23 +60,31 @@ void read_output(int fd, char *output, int len) } *output = '\0'; - n = os_read_file(fd, &remain, sizeof(remain)); - if(n != sizeof(remain)){ - printk("read_output - read of length failed, err = %d\n", -n); - return; + ret = os_read_file(fd, &remain, sizeof(remain)); + + if (ret != sizeof(remain)) { + expected = sizeof(remain); + str = "length"; + goto err; } while(remain != 0){ - n = (remain < len) ? remain : len; - actual = os_read_file(fd, output, n); - if(actual != n){ - printk("read_output - read of data failed, " - "err = %d\n", -actual); - return; + expected = (remain < len) ? remain : len; + ret = os_read_file(fd, output, expected); + if (ret != expected) { + str = "data"; + goto err; } - remain -= actual; + remain -= ret; } + return; + +err: + if (ret < 0) + printk("read_output - read of %s failed, errno = %d\n", str, -ret); + else + printk("read_output - read of %s failed, read only %d of %d bytes\n", str, ret, expected); } int net_read(int fd, void *buf, int len) diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c index 101efd26d467..fa617e0719ab 100644 --- a/arch/um/drivers/ubd_kern.c +++ b/arch/um/drivers/ubd_kern.c @@ -1135,7 +1135,7 @@ static int path_requires_switch(char *from_cmdline, char *from_cow, char *cow) static int backing_file_mismatch(char *file, __u64 size, time_t mtime) { unsigned long modtime; - long long actual; + unsigned long long actual; int err; err = os_file_modtime(file, &modtime); diff --git a/arch/um/include/init.h b/arch/um/include/init.h index cbd79a8d213d..d4de7c0120ce 100644 --- a/arch/um/include/init.h +++ b/arch/um/include/init.h @@ -122,7 +122,7 @@ extern struct uml_param __uml_setup_start, __uml_setup_end; #define __exitcall(fn) static exitcall_t __exitcall_##fn __exit_call = fn -#define __init_call __attribute__ ((unused,__section__ (".initcall.init"))) +#define __init_call __attribute_used__ __attribute__ ((__section__ (".initcall.init"))) #endif diff --git a/arch/um/include/os.h b/arch/um/include/os.h index eb1710b81255..2a1c64d8d0bf 100644 --- a/arch/um/include/os.h +++ b/arch/um/include/os.h @@ -179,8 +179,11 @@ extern void os_stop_process(int pid); extern void os_kill_process(int pid, int reap_child); extern void os_kill_ptraced_process(int pid, int reap_child); extern void os_usr1_process(int pid); +extern long os_ptrace_ldt(long pid, long addr, long data); + extern int os_getpid(void); extern int os_getpgrp(void); + extern void init_new_thread_stack(void *sig_stack, void (*usr1_handler)(int)); extern void init_new_thread_signals(int altstack); extern int run_kernel_thread(int (*fn)(void *), void *arg, void **jmp_ptr); diff --git a/arch/um/os-Linux/file.c b/arch/um/os-Linux/file.c index f55773c819e6..3bd10deea280 100644 --- a/arch/um/os-Linux/file.c +++ b/arch/um/os-Linux/file.c @@ -272,14 +272,23 @@ int os_connect_socket(char *name) snprintf(sock.sun_path, sizeof(sock.sun_path), "%s", name); fd = socket(AF_UNIX, SOCK_STREAM, 0); - if(fd < 0) - return(fd); + if(fd < 0) { + err = -errno; + goto out; + } err = connect(fd, (struct sockaddr *) &sock, sizeof(sock)); - if(err) - return(-errno); + if(err) { + err = -errno; + goto out_close; + } - return(fd); + return fd; + +out_close: + close(fd); +out: + return err; } void os_close_file(int fd) diff --git a/arch/um/os-Linux/process.c b/arch/um/os-Linux/process.c index 7f5e2dac2a35..d261888f39c4 100644 --- a/arch/um/os-Linux/process.c +++ b/arch/um/os-Linux/process.c @@ -19,6 +19,7 @@ #include "irq_user.h" #include "kern_util.h" #include "longjmp.h" +#include "skas_ptrace.h" #define ARBITRARY_ADDR -1 #define FAILURE_PID -1 @@ -100,6 +101,21 @@ void os_kill_process(int pid, int reap_child) } +/* This is here uniquely to have access to the userspace errno, i.e. the one + * used by ptrace in case of error. + */ + +long os_ptrace_ldt(long pid, long addr, long data) +{ + int ret; + + ret = ptrace(PTRACE_LDT, pid, addr, data); + + if (ret < 0) + return -errno; + return ret; +} + /* Kill off a ptraced child by all means available. kill it normally first, * then PTRACE_KILL it, then PTRACE_CONT it in case it's in a run state from * which it can't exit directly. diff --git a/arch/um/sys-i386/ldt.c b/arch/um/sys-i386/ldt.c index 1fa09a79a10b..fe0877b3509c 100644 --- a/arch/um/sys-i386/ldt.c +++ b/arch/um/sys-i386/ldt.c @@ -107,7 +107,7 @@ long write_ldt_entry(struct mm_id * mm_idp, int func, struct user_desc * desc, * So we need to switch child's mm into our userspace, then * later switch back. * - * Note: I'm unshure: should interrupts be disabled here? + * Note: I'm unsure: should interrupts be disabled here? */ if(!current->active_mm || current->active_mm == &init_mm || mm_idp != ¤t->active_mm->context.skas.id) @@ -129,9 +129,7 @@ long write_ldt_entry(struct mm_id * mm_idp, int func, struct user_desc * desc, pid = userspace_pid[cpu]; } - res = ptrace(PTRACE_LDT, pid, 0, (unsigned long) &ldt_op); - if(res) - res = errno; + res = os_ptrace_ldt(pid, 0, (unsigned long) &ldt_op); if(proc_mm) put_cpu(); @@ -181,8 +179,7 @@ static long read_ldt_from_host(void __user * ptr, unsigned long bytecount) */ cpu = get_cpu(); - res = ptrace(PTRACE_LDT, userspace_pid[cpu], 0, - (unsigned long) &ptrace_ldt); + res = os_ptrace_ldt(userspace_pid[cpu], 0, (unsigned long) &ptrace_ldt); put_cpu(); if(res < 0) goto out; diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig index 2f9deca31cc9..e18eb79bf855 100644 --- a/arch/x86_64/Kconfig +++ b/arch/x86_64/Kconfig @@ -354,21 +354,6 @@ config HPET_TIMER as it is off-chip. You can find the HPET spec at <http://www.intel.com/hardwaredesign/hpetspec.htm>. -config X86_PM_TIMER - bool "PM timer" if EMBEDDED - depends on ACPI - default y - help - Support the ACPI PM timer for time keeping. This is slow, - but is useful on some chipsets without HPET on systems with more - than one CPU. On a single processor or single socket multi core - system it is normally not required. - When the PM timer is active 64bit vsyscalls are disabled - and should not be enabled (/proc/sys/kernel/vsyscall64 should - not be changed). - The kernel selects the PM timer only as a last resort, so it is - useful to enable just in case. - config HPET_EMULATE_RTC bool "Provide RTC interrupt" depends on HPET_TIMER && RTC=y @@ -592,6 +577,7 @@ source "arch/x86_64/oprofile/Kconfig" config KPROBES bool "Kprobes (EXPERIMENTAL)" + depends on EXPERIMENTAL && MODULES help Kprobes allows you to trap at almost any kernel address and execute a callback function. register_kprobe() establishes diff --git a/arch/x86_64/kernel/Makefile b/arch/x86_64/kernel/Makefile index 72fe60c20d39..a098a11e7755 100644 --- a/arch/x86_64/kernel/Makefile +++ b/arch/x86_64/kernel/Makefile @@ -43,7 +43,7 @@ CFLAGS_vsyscall.o := $(PROFILING) -g0 bootflag-y += ../../i386/kernel/bootflag.o cpuid-$(subst m,y,$(CONFIG_X86_CPUID)) += ../../i386/kernel/cpuid.o -topology-y += ../../i386/mach-default/topology.o +topology-y += ../../i386/kernel/topology.o microcode-$(subst m,y,$(CONFIG_MICROCODE)) += ../../i386/kernel/microcode.o intel_cacheinfo-y += ../../i386/kernel/cpu/intel_cacheinfo.o quirks-y += ../../i386/kernel/quirks.o diff --git a/arch/x86_64/kernel/aperture.c b/arch/x86_64/kernel/aperture.c index e4e2b7d01f89..a0f955b9995f 100644 --- a/arch/x86_64/kernel/aperture.c +++ b/arch/x86_64/kernel/aperture.c @@ -248,7 +248,7 @@ void __init iommu_hole_init(void) /* Got the aperture from the AGP bridge */ } else if (swiotlb && !valid_agp) { /* Do nothing */ - } else if ((!no_iommu && end_pfn >= MAX_DMA32_PFN) || + } else if ((!no_iommu && end_pfn > MAX_DMA32_PFN) || force_iommu || valid_agp || fallback_aper_force) { diff --git a/arch/x86_64/kernel/apic.c b/arch/x86_64/kernel/apic.c index e5b14c57eaa0..d70605eda333 100644 --- a/arch/x86_64/kernel/apic.c +++ b/arch/x86_64/kernel/apic.c @@ -962,12 +962,14 @@ void smp_apic_timer_interrupt(struct pt_regs *regs) irq_exit(); } +int __initdata unsync_tsc_on_multicluster; + /* * oem_force_hpet_timer -- force HPET mode for some boxes. * * Thus far, the major user of this is IBM's Summit2 series: * - * Clustered boxes may have unsynced TSC problems if they are + * Some clustered boxes may have unsynced TSC problems if they are * multi-chassis. Use available data to take a good guess. * If in doubt, go HPET. */ @@ -977,6 +979,11 @@ __cpuinit int oem_force_hpet_timer(void) unsigned id; DECLARE_BITMAP(clustermap, NUM_APIC_CLUSTERS); + /* Only do this check on IBM machines - big Unisys systems + use multiple clusters too, but have synchronized TSC */ + if (!unsync_tsc_on_multicluster) + return 0; + bitmap_zero(clustermap, NUM_APIC_CLUSTERS); for (i = 0; i < NR_CPUS; i++) { diff --git a/arch/x86_64/kernel/io_apic.c b/arch/x86_64/kernel/io_apic.c index 2585c1d92b26..ffed464e6b12 100644 --- a/arch/x86_64/kernel/io_apic.c +++ b/arch/x86_64/kernel/io_apic.c @@ -50,6 +50,8 @@ static int no_timer_check; int disable_timer_pin_1 __initdata; +int timer_over_8254 __initdata = 1; + /* Where if anywhere is the i8259 connect in external int mode */ static struct { int pin, apic; } ioapic_i8259 = { -1, -1 }; @@ -251,6 +253,20 @@ static int __init enable_ioapic_setup(char *str) __setup("noapic", disable_ioapic_setup); __setup("apic", enable_ioapic_setup); +static int __init setup_disable_8254_timer(char *s) +{ + timer_over_8254 = -1; + return 1; +} +static int __init setup_enable_8254_timer(char *s) +{ + timer_over_8254 = 2; + return 1; +} + +__setup("disable_8254_timer", setup_disable_8254_timer); +__setup("enable_8254_timer", setup_enable_8254_timer); + #include <asm/pci-direct.h> #include <linux/pci_ids.h> #include <linux/pci.h> @@ -309,27 +325,20 @@ void __init check_ioapic(void) #endif /* RED-PEN skip them on mptables too? */ return; + + /* This should be actually default, but + for 2.6.16 let's do it for ATI only where + it's really needed. */ case PCI_VENDOR_ID_ATI: - if (apic_runs_main_timer != 0) - break; -#ifdef CONFIG_ACPI - /* Don't do this for laptops right - right now because their timer - doesn't necessarily tick in C2/3 */ - if (acpi_fadt.revision >= 3 && - (acpi_fadt.plvl2_lat + acpi_fadt.plvl3_lat) < 1100) { - printk(KERN_INFO -"ATI board detected, but seems to be a laptop. Timer might be shakey, sorry\n"); - break; - } -#endif + if (timer_over_8254 == 1) { + timer_over_8254 = 0; printk(KERN_INFO - "ATI board detected. Using APIC/PM timer.\n"); - apic_runs_main_timer = 1; - nohpet = 1; + "ATI board detected. Disabling timer routing over 8254.\n"); + } return; } + /* No multi-function device? */ type = read_pci_config_byte(num,slot,func, PCI_HEADER_TYPE); @@ -1773,6 +1782,8 @@ static inline void unlock_ExtINT_logic(void) * a wide range of boards and BIOS bugs. Fortunately only the timer IRQ * is so screwy. Thanks to Brian Perkins for testing/hacking this beast * fanatically on his truly buggy board. + * + * FIXME: really need to revamp this for modern platforms only. */ static inline void check_timer(void) { @@ -1795,7 +1806,8 @@ static inline void check_timer(void) */ apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT); init_8259A(1); - enable_8259A_irq(0); + if (timer_over_8254 > 0) + enable_8259A_irq(0); pin1 = find_isa_irq_pin(0, mp_INT); apic1 = find_isa_irq_apic(0, mp_INT); @@ -1850,7 +1862,7 @@ static inline void check_timer(void) } printk(" failed.\n"); - if (nmi_watchdog) { + if (nmi_watchdog == NMI_IO_APIC) { printk(KERN_WARNING "timer doesn't work through the IO-APIC - disabling NMI Watchdog!\n"); nmi_watchdog = 0; } diff --git a/arch/x86_64/kernel/pci-gart.c b/arch/x86_64/kernel/pci-gart.c index dd0718dc178b..0c3f052ba6ce 100644 --- a/arch/x86_64/kernel/pci-gart.c +++ b/arch/x86_64/kernel/pci-gart.c @@ -228,11 +228,6 @@ static inline int need_iommu(struct device *dev, unsigned long addr, size_t size int mmu = high; if (force_iommu) mmu = 1; - if (no_iommu) { - if (high) - panic("PCI-DMA: high address but no IOMMU.\n"); - mmu = 0; - } return mmu; } @@ -241,11 +236,6 @@ static inline int nonforced_iommu(struct device *dev, unsigned long addr, size_t u64 mask = *dev->dma_mask; int high = addr + size >= mask; int mmu = high; - if (no_iommu) { - if (high) - panic("PCI-DMA: high address but no IOMMU.\n"); - mmu = 0; - } return mmu; } @@ -310,7 +300,7 @@ void gart_unmap_sg(struct device *dev, struct scatterlist *sg, int nents, int di for (i = 0; i < nents; i++) { struct scatterlist *s = &sg[i]; - if (!s->dma_length) + if (!s->dma_length || !s->length) break; dma_unmap_single(dev, s->dma_address, s->dma_length, dir); } @@ -364,6 +354,7 @@ static int __dma_map_cont(struct scatterlist *sg, int start, int stopat, BUG_ON(i > start && s->offset); if (i == start) { + *sout = *s; sout->dma_address = iommu_bus_base; sout->dma_address += iommu_page*PAGE_SIZE + s->offset; sout->dma_length = s->length; @@ -390,6 +381,7 @@ static inline int dma_map_cont(struct scatterlist *sg, int start, int stopat, { if (!need) { BUG_ON(stopat - start != 1); + *sout = sg[start]; sout->dma_length = sg[start].length; return 0; } @@ -632,17 +624,13 @@ static int __init pci_iommu_init(void) (agp_copy_info(agp_bridge, &info) < 0); #endif - if (swiotlb) { - no_iommu = 1; + if (swiotlb) return -1; - } - + if (no_iommu || (!force_iommu && end_pfn <= MAX_DMA32_PFN) || !iommu_aperture || (no_agp && init_k8_gatt(&info) < 0)) { - no_iommu = 1; - no_iommu_init(); printk(KERN_INFO "PCI-DMA: Disabling IOMMU.\n"); if (end_pfn > MAX_DMA32_PFN) { printk(KERN_ERR "WARNING more than 4GB of memory " diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c index 9435ab7d6fb8..aa55e3cec665 100644 --- a/arch/x86_64/kernel/setup.c +++ b/arch/x86_64/kernel/setup.c @@ -423,6 +423,12 @@ static __init void parse_cmdline_early (char ** cmdline_p) else if(!memcmp(from, "elfcorehdr=", 11)) elfcorehdr_addr = memparse(from+11, &from); #endif + +#ifdef CONFIG_HOTPLUG_CPU + else if (!memcmp(from, "additional_cpus=", 16)) + setup_additional_cpus(from+16); +#endif + next_char: c = *(from++); if (!c) diff --git a/arch/x86_64/kernel/smpboot.c b/arch/x86_64/kernel/smpboot.c index 67e4e28f4df8..66e98659d077 100644 --- a/arch/x86_64/kernel/smpboot.c +++ b/arch/x86_64/kernel/smpboot.c @@ -1152,8 +1152,6 @@ void __init smp_cpus_done(unsigned int max_cpus) setup_ioapic_dest(); #endif - time_init_gtod(); - check_nmi_watchdog(); } @@ -1244,7 +1242,7 @@ void __cpu_die(unsigned int cpu) printk(KERN_ERR "CPU %u didn't die...\n", cpu); } -static __init int setup_additional_cpus(char *s) +__init int setup_additional_cpus(char *s) { return get_option(&s, &additional_cpus); } diff --git a/arch/x86_64/kernel/time.c b/arch/x86_64/kernel/time.c index 67841d11ed1f..3080f84bf7b7 100644 --- a/arch/x86_64/kernel/time.c +++ b/arch/x86_64/kernel/time.c @@ -48,6 +48,8 @@ static void cpufreq_delayed_get(void); extern void i8254_timer_resume(void); extern int using_apic_timer; +static char *time_init_gtod(void); + DEFINE_SPINLOCK(rtc_lock); DEFINE_SPINLOCK(i8253_lock); @@ -901,6 +903,7 @@ static struct irqaction irq0 = { void __init time_init(void) { char *timename; + char *gtod; #ifdef HPET_HACK_ENABLE_DANGEROUS if (!vxtime.hpet_address) { @@ -945,21 +948,19 @@ void __init time_init(void) timename = "PIT"; } - printk(KERN_INFO "time.c: Using %ld.%06ld MHz %s timer.\n", - vxtime_hz / 1000000, vxtime_hz % 1000000, timename); + vxtime.mode = VXTIME_TSC; + gtod = time_init_gtod(); + + printk(KERN_INFO "time.c: Using %ld.%06ld MHz WALL %s GTOD %s timer.\n", + vxtime_hz / 1000000, vxtime_hz % 1000000, timename, gtod); printk(KERN_INFO "time.c: Detected %d.%03d MHz processor.\n", cpu_khz / 1000, cpu_khz % 1000); - vxtime.mode = VXTIME_TSC; vxtime.quot = (1000000L << 32) / vxtime_hz; vxtime.tsc_quot = (1000L << 32) / cpu_khz; vxtime.last_tsc = get_cycles_sync(); setup_irq(0, &irq0); set_cyc2ns_scale(cpu_khz); - -#ifndef CONFIG_SMP - time_init_gtod(); -#endif } /* @@ -981,9 +982,9 @@ __cpuinit int unsynchronized_tsc(void) } /* - * Decide after all CPUs are booted what mode gettimeofday should use. + * Decide what mode gettimeofday should use. */ -void __init time_init_gtod(void) +__init static char *time_init_gtod(void) { char *timetype; @@ -1011,8 +1012,7 @@ void __init time_init_gtod(void) timetype = hpet_use_timer ? "HPET/TSC" : "PIT/TSC"; vxtime.mode = VXTIME_TSC; } - - printk(KERN_INFO "time.c: Using %s based timekeeping.\n", timetype); + return timetype; } __setup("report_lost_ticks", time_setup); |