diff options
Diffstat (limited to 'arch')
-rw-r--r-- | arch/microblaze/include/asm/pci-bridge.h | 34 | ||||
-rw-r--r-- | arch/microblaze/pci/Makefile | 2 | ||||
-rw-r--r-- | arch/microblaze/pci/indirect_pci.c | 158 | ||||
-rw-r--r-- | arch/microblaze/pci/xilinx_pci.c | 6 |
4 files changed, 1 insertions, 199 deletions
diff --git a/arch/microblaze/include/asm/pci-bridge.h b/arch/microblaze/include/asm/pci-bridge.h index 170369dcdbff..cd9ae71348a4 100644 --- a/arch/microblaze/include/asm/pci-bridge.h +++ b/arch/microblaze/include/asm/pci-bridge.h @@ -32,8 +32,6 @@ struct pci_controller { int first_busno; int last_busno; - int self_busno; - void __iomem *io_base_virt; resource_size_t io_base_phys; @@ -42,34 +40,6 @@ struct pci_controller { */ resource_size_t pci_mem_offset; - struct pci_ops *ops; - unsigned int __iomem *cfg_addr; - void __iomem *cfg_data; - - /* - * Used for variants of PCI indirect handling and possible quirks: - * SET_CFG_TYPE - used on 4xx or any PHB that does explicit type0/1 - * EXT_REG - provides access to PCI-e extended registers - * SURPRESS_PRIMARY_BUS - we suppress the setting of PCI_PRIMARY_BUS - * on Freescale PCI-e controllers since they used the PCI_PRIMARY_BUS - * to determine which bus number to match on when generating type0 - * config cycles - * NO_PCIE_LINK - the Freescale PCI-e controllers have issues with - * hanging if we don't have link and try to do config cycles to - * anything but the PHB. Only allow talking to the PHB if this is - * set. - * BIG_ENDIAN - cfg_addr is a big endian register - * BROKEN_MRM - the 440EPx/GRx chips have an errata that causes hangs - * on the PLB4. Effectively disable MRM commands by setting this. - */ -#define INDIRECT_TYPE_SET_CFG_TYPE 0x00000001 -#define INDIRECT_TYPE_EXT_REG 0x00000002 -#define INDIRECT_TYPE_SURPRESS_PRIMARY_BUS 0x00000004 -#define INDIRECT_TYPE_NO_PCIE_LINK 0x00000008 -#define INDIRECT_TYPE_BIG_ENDIAN 0x00000010 -#define INDIRECT_TYPE_BROKEN_MRM 0x00000020 - u32 indirect_type; - /* Currently, we limit ourselves to 1 IO range and 3 mem * ranges since the common pci_bus structure can't handle more */ @@ -91,9 +61,5 @@ static inline int isa_vaddr_is_ioport(void __iomem *address) } #endif /* CONFIG_PCI */ -extern void setup_indirect_pci(struct pci_controller *hose, - resource_size_t cfg_addr, - resource_size_t cfg_data, u32 flags); - #endif /* __KERNEL__ */ #endif /* _ASM_MICROBLAZE_PCI_BRIDGE_H */ diff --git a/arch/microblaze/pci/Makefile b/arch/microblaze/pci/Makefile index 0251c20e1d62..3cbdf2529b95 100644 --- a/arch/microblaze/pci/Makefile +++ b/arch/microblaze/pci/Makefile @@ -3,5 +3,5 @@ # Makefile # -obj-$(CONFIG_PCI) += pci-common.o indirect_pci.o iomap.o +obj-$(CONFIG_PCI) += pci-common.o iomap.o obj-$(CONFIG_PCI_XILINX) += xilinx_pci.o diff --git a/arch/microblaze/pci/indirect_pci.c b/arch/microblaze/pci/indirect_pci.c deleted file mode 100644 index 1caf7d3e0eef..000000000000 --- a/arch/microblaze/pci/indirect_pci.c +++ /dev/null @@ -1,158 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Support for indirect PCI bridges. - * - * Copyright (C) 1998 Gabriel Paubert. - */ - -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/delay.h> -#include <linux/string.h> -#include <linux/init.h> - -#include <linux/io.h> -#include <asm/pci-bridge.h> - -static int -indirect_read_config(struct pci_bus *bus, unsigned int devfn, int offset, - int len, u32 *val) -{ - struct pci_controller *hose = pci_bus_to_host(bus); - volatile void __iomem *cfg_data; - u8 cfg_type = 0; - u32 bus_no, reg; - - if (hose->indirect_type & INDIRECT_TYPE_NO_PCIE_LINK) { - if (bus->number != hose->first_busno) - return PCIBIOS_DEVICE_NOT_FOUND; - if (devfn != 0) - return PCIBIOS_DEVICE_NOT_FOUND; - } - - if (hose->indirect_type & INDIRECT_TYPE_SET_CFG_TYPE) - if (bus->number != hose->first_busno) - cfg_type = 1; - - bus_no = (bus->number == hose->first_busno) ? - hose->self_busno : bus->number; - - if (hose->indirect_type & INDIRECT_TYPE_EXT_REG) - reg = ((offset & 0xf00) << 16) | (offset & 0xfc); - else - reg = offset & 0xfc; /* Only 3 bits for function */ - - if (hose->indirect_type & INDIRECT_TYPE_BIG_ENDIAN) - out_be32(hose->cfg_addr, (0x80000000 | (bus_no << 16) | - (devfn << 8) | reg | cfg_type)); - else - out_le32(hose->cfg_addr, (0x80000000 | (bus_no << 16) | - (devfn << 8) | reg | cfg_type)); - - /* - * Note: the caller has already checked that offset is - * suitably aligned and that len is 1, 2 or 4. - */ - cfg_data = hose->cfg_data + (offset & 3); /* Only 3 bits for function */ - switch (len) { - case 1: - *val = in_8(cfg_data); - break; - case 2: - *val = in_le16(cfg_data); - break; - default: - *val = in_le32(cfg_data); - break; - } - return PCIBIOS_SUCCESSFUL; -} - -static int -indirect_write_config(struct pci_bus *bus, unsigned int devfn, int offset, - int len, u32 val) -{ - struct pci_controller *hose = pci_bus_to_host(bus); - volatile void __iomem *cfg_data; - u8 cfg_type = 0; - u32 bus_no, reg; - - if (hose->indirect_type & INDIRECT_TYPE_NO_PCIE_LINK) { - if (bus->number != hose->first_busno) - return PCIBIOS_DEVICE_NOT_FOUND; - if (devfn != 0) - return PCIBIOS_DEVICE_NOT_FOUND; - } - - if (hose->indirect_type & INDIRECT_TYPE_SET_CFG_TYPE) - if (bus->number != hose->first_busno) - cfg_type = 1; - - bus_no = (bus->number == hose->first_busno) ? - hose->self_busno : bus->number; - - if (hose->indirect_type & INDIRECT_TYPE_EXT_REG) - reg = ((offset & 0xf00) << 16) | (offset & 0xfc); - else - reg = offset & 0xfc; - - if (hose->indirect_type & INDIRECT_TYPE_BIG_ENDIAN) - out_be32(hose->cfg_addr, (0x80000000 | (bus_no << 16) | - (devfn << 8) | reg | cfg_type)); - else - out_le32(hose->cfg_addr, (0x80000000 | (bus_no << 16) | - (devfn << 8) | reg | cfg_type)); - - /* suppress setting of PCI_PRIMARY_BUS */ - if (hose->indirect_type & INDIRECT_TYPE_SURPRESS_PRIMARY_BUS) - if ((offset == PCI_PRIMARY_BUS) && - (bus->number == hose->first_busno)) - val &= 0xffffff00; - - /* Workaround for PCI_28 Errata in 440EPx/GRx */ - if ((hose->indirect_type & INDIRECT_TYPE_BROKEN_MRM) && - offset == PCI_CACHE_LINE_SIZE) { - val = 0; - } - - /* - * Note: the caller has already checked that offset is - * suitably aligned and that len is 1, 2 or 4. - */ - cfg_data = hose->cfg_data + (offset & 3); - switch (len) { - case 1: - out_8(cfg_data, val); - break; - case 2: - out_le16(cfg_data, val); - break; - default: - out_le32(cfg_data, val); - break; - } - - return PCIBIOS_SUCCESSFUL; -} - -static struct pci_ops indirect_pci_ops = { - .read = indirect_read_config, - .write = indirect_write_config, -}; - -void __init -setup_indirect_pci(struct pci_controller *hose, - resource_size_t cfg_addr, - resource_size_t cfg_data, u32 flags) -{ - resource_size_t base = cfg_addr & PAGE_MASK; - void __iomem *mbase; - - mbase = ioremap(base, PAGE_SIZE); - hose->cfg_addr = mbase + (cfg_addr & ~PAGE_MASK); - if ((cfg_data & PAGE_MASK) != base) - mbase = ioremap(cfg_data & PAGE_MASK, PAGE_SIZE); - hose->cfg_data = mbase + (cfg_data & ~PAGE_MASK); - hose->ops = &indirect_pci_ops; - hose->indirect_type = flags; -} diff --git a/arch/microblaze/pci/xilinx_pci.c b/arch/microblaze/pci/xilinx_pci.c index 3fa16e3c8e48..5dc41822b2d7 100644 --- a/arch/microblaze/pci/xilinx_pci.c +++ b/arch/microblaze/pci/xilinx_pci.c @@ -83,7 +83,6 @@ xilinx_pci_exclude_device(struct pci_controller *hose, u_char bus, u8 devfn) */ void __init xilinx_pci_init(void) { - struct pci_controller *hose; struct resource r; void __iomem *pci_reg; struct device_node *pci_node; @@ -97,11 +96,6 @@ void __init xilinx_pci_init(void) return; } - /* Setup config space */ - setup_indirect_pci(hose, r.start + XPLB_PCI_ADDR, - r.start + XPLB_PCI_DATA, - INDIRECT_TYPE_SET_CFG_TYPE); - /* Set the max bus number to 255, and bus/subbus no's to 0 */ pci_reg = of_iomap(pci_node, 0); WARN_ON(!pci_reg); |