summaryrefslogtreecommitdiffstats
path: root/drivers/bus
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/bus')
-rw-r--r--drivers/bus/mips_cdmm.c4
-rw-r--r--drivers/bus/mvebu-mbus.c109
-rw-r--r--drivers/bus/omap_l3_noc.c4
3 files changed, 23 insertions, 94 deletions
diff --git a/drivers/bus/mips_cdmm.c b/drivers/bus/mips_cdmm.c
index 5bd792c68f9b..ab3bde16ecb4 100644
--- a/drivers/bus/mips_cdmm.c
+++ b/drivers/bus/mips_cdmm.c
@@ -453,7 +453,7 @@ void __iomem *mips_cdmm_early_probe(unsigned int dev_type)
/* Look for a specific device type */
for (; drb < bus->drbs; drb += size + 1) {
- acsr = readl(cdmm + drb * CDMM_DRB_SIZE);
+ acsr = __raw_readl(cdmm + drb * CDMM_DRB_SIZE);
type = (acsr & CDMM_ACSR_DEVTYPE) >> CDMM_ACSR_DEVTYPE_SHIFT;
if (type == dev_type)
return cdmm + drb * CDMM_DRB_SIZE;
@@ -500,7 +500,7 @@ static void mips_cdmm_bus_discover(struct mips_cdmm_bus *bus)
bus->discovered = true;
pr_info("cdmm%u discovery (%u blocks)\n", cpu, bus->drbs);
for (; drb < bus->drbs; drb += size + 1) {
- acsr = readl(cdmm + drb * CDMM_DRB_SIZE);
+ acsr = __raw_readl(cdmm + drb * CDMM_DRB_SIZE);
type = (acsr & CDMM_ACSR_DEVTYPE) >> CDMM_ACSR_DEVTYPE_SHIFT;
size = (acsr & CDMM_ACSR_DEVSIZE) >> CDMM_ACSR_DEVSIZE_SHIFT;
rev = (acsr & CDMM_ACSR_DEVREV) >> CDMM_ACSR_DEVREV_SHIFT;
diff --git a/drivers/bus/mvebu-mbus.c b/drivers/bus/mvebu-mbus.c
index fb9ec6221730..6f047dcb94c2 100644
--- a/drivers/bus/mvebu-mbus.c
+++ b/drivers/bus/mvebu-mbus.c
@@ -58,7 +58,6 @@
#include <linux/debugfs.h>
#include <linux/log2.h>
#include <linux/syscore_ops.h>
-#include <linux/memblock.h>
/*
* DDR target is the same on all platforms.
@@ -70,6 +69,7 @@
*/
#define WIN_CTRL_OFF 0x0000
#define WIN_CTRL_ENABLE BIT(0)
+/* Only on HW I/O coherency capable platforms */
#define WIN_CTRL_SYNCBARRIER BIT(1)
#define WIN_CTRL_TGT_MASK 0xf0
#define WIN_CTRL_TGT_SHIFT 4
@@ -102,9 +102,7 @@
/* Relative to mbusbridge_base */
#define MBUS_BRIDGE_CTRL_OFF 0x0
-#define MBUS_BRIDGE_SIZE_MASK 0xffff0000
#define MBUS_BRIDGE_BASE_OFF 0x4
-#define MBUS_BRIDGE_BASE_MASK 0xffff0000
/* Maximum number of windows, for all known platforms */
#define MBUS_WINS_MAX 20
@@ -323,8 +321,9 @@ static int mvebu_mbus_setup_window(struct mvebu_mbus_state *mbus,
ctrl = ((size - 1) & WIN_CTRL_SIZE_MASK) |
(attr << WIN_CTRL_ATTR_SHIFT) |
(target << WIN_CTRL_TGT_SHIFT) |
- WIN_CTRL_SYNCBARRIER |
WIN_CTRL_ENABLE;
+ if (mbus->hw_io_coherency)
+ ctrl |= WIN_CTRL_SYNCBARRIER;
writel(base & WIN_BASE_LOW, addr + WIN_BASE_OFF);
writel(ctrl, addr + WIN_CTRL_OFF);
@@ -577,106 +576,36 @@ static unsigned int armada_xp_mbus_win_remap_offset(int win)
return MVEBU_MBUS_NO_REMAP;
}
-/*
- * Use the memblock information to find the MBus bridge hole in the
- * physical address space.
- */
-static void __init
-mvebu_mbus_find_bridge_hole(uint64_t *start, uint64_t *end)
-{
- struct memblock_region *r;
- uint64_t s = 0;
-
- for_each_memblock(memory, r) {
- /*
- * This part of the memory is above 4 GB, so we don't
- * care for the MBus bridge hole.
- */
- if (r->base >= 0x100000000)
- continue;
-
- /*
- * The MBus bridge hole is at the end of the RAM under
- * the 4 GB limit.
- */
- if (r->base + r->size > s)
- s = r->base + r->size;
- }
-
- *start = s;
- *end = 0x100000000;
-}
-
static void __init
mvebu_mbus_default_setup_cpu_target(struct mvebu_mbus_state *mbus)
{
int i;
int cs;
- uint64_t mbus_bridge_base, mbus_bridge_end;
mvebu_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
- mvebu_mbus_find_bridge_hole(&mbus_bridge_base, &mbus_bridge_end);
-
for (i = 0, cs = 0; i < 4; i++) {
- u64 base = readl(mbus->sdramwins_base + DDR_BASE_CS_OFF(i));
- u64 size = readl(mbus->sdramwins_base + DDR_SIZE_CS_OFF(i));
- u64 end;
- struct mbus_dram_window *w;
-
- /* Ignore entries that are not enabled */
- if (!(size & DDR_SIZE_ENABLED))
- continue;
-
- /*
- * Ignore entries whose base address is above 2^32,
- * since devices cannot DMA to such high addresses
- */
- if (base & DDR_BASE_CS_HIGH_MASK)
- continue;
-
- base = base & DDR_BASE_CS_LOW_MASK;
- size = (size | ~DDR_SIZE_MASK) + 1;
- end = base + size;
-
- /*
- * Adjust base/size of the current CS to make sure it
- * doesn't overlap with the MBus bridge hole. This is
- * particularly important for devices that do DMA from
- * DRAM to a SRAM mapped in a MBus window, such as the
- * CESA cryptographic engine.
- */
+ u32 base = readl(mbus->sdramwins_base + DDR_BASE_CS_OFF(i));
+ u32 size = readl(mbus->sdramwins_base + DDR_SIZE_CS_OFF(i));
/*
- * The CS is fully enclosed inside the MBus bridge
- * area, so ignore it.
+ * We only take care of entries for which the chip
+ * select is enabled, and that don't have high base
+ * address bits set (devices can only access the first
+ * 32 bits of the memory).
*/
- if (base >= mbus_bridge_base && end <= mbus_bridge_end)
- continue;
+ if ((size & DDR_SIZE_ENABLED) &&
+ !(base & DDR_BASE_CS_HIGH_MASK)) {
+ struct mbus_dram_window *w;
- /*
- * Beginning of CS overlaps with end of MBus, raise CS
- * base address, and shrink its size.
- */
- if (base >= mbus_bridge_base && end > mbus_bridge_end) {
- size -= mbus_bridge_end - base;
- base = mbus_bridge_end;
+ w = &mvebu_mbus_dram_info.cs[cs++];
+ w->cs_index = i;
+ w->mbus_attr = 0xf & ~(1 << i);
+ if (mbus->hw_io_coherency)
+ w->mbus_attr |= ATTR_HW_COHERENCY;
+ w->base = base & DDR_BASE_CS_LOW_MASK;
+ w->size = (size | ~DDR_SIZE_MASK) + 1;
}
-
- /*
- * End of CS overlaps with beginning of MBus, shrink
- * CS size.
- */
- if (base < mbus_bridge_base && end > mbus_bridge_base)
- size -= end - mbus_bridge_base;
-
- w = &mvebu_mbus_dram_info.cs[cs++];
- w->cs_index = i;
- w->mbus_attr = 0xf & ~(1 << i);
- if (mbus->hw_io_coherency)
- w->mbus_attr |= ATTR_HW_COHERENCY;
- w->base = base;
- w->size = size;
}
mvebu_mbus_dram_info.num_cs = cs;
}
diff --git a/drivers/bus/omap_l3_noc.c b/drivers/bus/omap_l3_noc.c
index ebee57d715d2..5012e3ad1225 100644
--- a/drivers/bus/omap_l3_noc.c
+++ b/drivers/bus/omap_l3_noc.c
@@ -301,7 +301,7 @@ static int omap_l3_probe(struct platform_device *pdev)
return ret;
}
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
/**
* l3_resume_noirq() - resume function for l3_noc
@@ -347,7 +347,7 @@ static int l3_resume_noirq(struct device *dev)
}
static const struct dev_pm_ops l3_dev_pm_ops = {
- .resume_noirq = l3_resume_noirq,
+ SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(NULL, l3_resume_noirq)
};
#define L3_DEV_PM_OPS (&l3_dev_pm_ops)
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-17 11:16:12 +0000