summaryrefslogtreecommitdiffstats
path: root/drivers/devfreq/rk3399_dmc.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/devfreq/rk3399_dmc.c')
-rw-r--r--drivers/devfreq/rk3399_dmc.c102
1 files changed, 40 insertions, 62 deletions
diff --git a/drivers/devfreq/rk3399_dmc.c b/drivers/devfreq/rk3399_dmc.c
index 5dfbfa3cc878..e795ad2b3f6b 100644
--- a/drivers/devfreq/rk3399_dmc.c
+++ b/drivers/devfreq/rk3399_dmc.c
@@ -68,15 +68,6 @@ struct rk3399_dmcfreq {
struct devfreq_event_dev *edev;
struct mutex lock;
struct dram_timing timing;
-
- /*
- * DDR Converser of Frequency (DCF) is used to implement DDR frequency
- * conversion without the participation of CPU, we will implement and
- * control it in arm trust firmware.
- */
- wait_queue_head_t wait_dcf_queue;
- int irq;
- int wait_dcf_flag;
struct regulator *vdd_center;
unsigned long rate, target_rate;
unsigned long volt, target_volt;
@@ -112,31 +103,22 @@ static int rk3399_dmcfreq_target(struct device *dev, unsigned long *freq,
err = regulator_set_voltage(dmcfreq->vdd_center, target_volt,
target_volt);
if (err) {
- dev_err(dev, "Cannot to set voltage %lu uV\n",
+ dev_err(dev, "Cannot set voltage %lu uV\n",
target_volt);
goto out;
}
}
- dmcfreq->wait_dcf_flag = 1;
err = clk_set_rate(dmcfreq->dmc_clk, target_rate);
if (err) {
- dev_err(dev, "Cannot to set frequency %lu (%d)\n",
- target_rate, err);
+ dev_err(dev, "Cannot set frequency %lu (%d)\n", target_rate,
+ err);
regulator_set_voltage(dmcfreq->vdd_center, dmcfreq->volt,
dmcfreq->volt);
goto out;
}
/*
- * Wait until bcf irq happen, it means freq scaling finish in
- * arm trust firmware, use 100ms as timeout time.
- */
- if (!wait_event_timeout(dmcfreq->wait_dcf_queue,
- !dmcfreq->wait_dcf_flag, HZ / 10))
- dev_warn(dev, "Timeout waiting for dcf interrupt\n");
-
- /*
* Check the dpll rate,
* There only two result we will get,
* 1. Ddr frequency scaling fail, we still get the old rate.
@@ -146,8 +128,8 @@ static int rk3399_dmcfreq_target(struct device *dev, unsigned long *freq,
/* If get the incorrect rate, set voltage to old value. */
if (dmcfreq->rate != target_rate) {
- dev_err(dev, "Get wrong ddr frequency, Request frequency %lu,\
- Current frequency %lu\n", target_rate, dmcfreq->rate);
+ dev_err(dev, "Got wrong frequency, Request %lu, Current %lu\n",
+ target_rate, dmcfreq->rate);
regulator_set_voltage(dmcfreq->vdd_center, dmcfreq->volt,
dmcfreq->volt);
goto out;
@@ -155,7 +137,7 @@ static int rk3399_dmcfreq_target(struct device *dev, unsigned long *freq,
err = regulator_set_voltage(dmcfreq->vdd_center, target_volt,
target_volt);
if (err)
- dev_err(dev, "Cannot to set vol %lu uV\n", target_volt);
+ dev_err(dev, "Cannot set voltage %lu uV\n", target_volt);
dmcfreq->rate = target_rate;
dmcfreq->volt = target_volt;
@@ -241,22 +223,6 @@ static __maybe_unused int rk3399_dmcfreq_resume(struct device *dev)
static SIMPLE_DEV_PM_OPS(rk3399_dmcfreq_pm, rk3399_dmcfreq_suspend,
rk3399_dmcfreq_resume);
-static irqreturn_t rk3399_dmc_irq(int irq, void *dev_id)
-{
- struct rk3399_dmcfreq *dmcfreq = dev_id;
- struct arm_smccc_res res;
-
- dmcfreq->wait_dcf_flag = 0;
- wake_up(&dmcfreq->wait_dcf_queue);
-
- /* Clear the DCF interrupt */
- arm_smccc_smc(ROCKCHIP_SIP_DRAM_FREQ, 0, 0,
- ROCKCHIP_SIP_CONFIG_DRAM_CLR_IRQ,
- 0, 0, 0, 0, &res);
-
- return IRQ_HANDLED;
-}
-
static int of_get_ddr_timings(struct dram_timing *timing,
struct device_node *np)
{
@@ -330,16 +296,10 @@ static int rk3399_dmcfreq_probe(struct platform_device *pdev)
struct device *dev = &pdev->dev;
struct device_node *np = pdev->dev.of_node;
struct rk3399_dmcfreq *data;
- int ret, irq, index, size;
+ int ret, index, size;
uint32_t *timing;
struct dev_pm_opp *opp;
- irq = platform_get_irq(pdev, 0);
- if (irq < 0) {
- dev_err(&pdev->dev,
- "Cannot get the dmc interrupt resource: %d\n", irq);
- return irq;
- }
data = devm_kzalloc(dev, sizeof(struct rk3399_dmcfreq), GFP_KERNEL);
if (!data)
return -ENOMEM;
@@ -348,27 +308,22 @@ static int rk3399_dmcfreq_probe(struct platform_device *pdev)
data->vdd_center = devm_regulator_get(dev, "center");
if (IS_ERR(data->vdd_center)) {
+ if (PTR_ERR(data->vdd_center) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+
dev_err(dev, "Cannot get the regulator \"center\"\n");
return PTR_ERR(data->vdd_center);
}
data->dmc_clk = devm_clk_get(dev, "dmc_clk");
if (IS_ERR(data->dmc_clk)) {
+ if (PTR_ERR(data->dmc_clk) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+
dev_err(dev, "Cannot get the clk dmc_clk\n");
return PTR_ERR(data->dmc_clk);
};
- data->irq = irq;
- ret = devm_request_irq(dev, irq, rk3399_dmc_irq, 0,
- dev_name(dev), data);
- if (ret) {
- dev_err(dev, "Failed to request dmc irq: %d\n", ret);
- return ret;
- }
-
- init_waitqueue_head(&data->wait_dcf_queue);
- data->wait_dcf_flag = 0;
-
data->edev = devfreq_event_get_edev_by_phandle(dev, 0);
if (IS_ERR(data->edev))
return -EPROBE_DEFER;
@@ -420,8 +375,10 @@ static int rk3399_dmcfreq_probe(struct platform_device *pdev)
data->rate = clk_get_rate(data->dmc_clk);
opp = devfreq_recommended_opp(dev, &data->rate, 0);
- if (IS_ERR(opp))
- return PTR_ERR(opp);
+ if (IS_ERR(opp)) {
+ ret = PTR_ERR(opp);
+ goto err_free_opp;
+ }
data->rate = dev_pm_opp_get_freq(opp);
data->volt = dev_pm_opp_get_voltage(opp);
@@ -433,14 +390,34 @@ static int rk3399_dmcfreq_probe(struct platform_device *pdev)
&rk3399_devfreq_dmc_profile,
DEVFREQ_GOV_SIMPLE_ONDEMAND,
&data->ondemand_data);
- if (IS_ERR(data->devfreq))
- return PTR_ERR(data->devfreq);
+ if (IS_ERR(data->devfreq)) {
+ ret = PTR_ERR(data->devfreq);
+ goto err_free_opp;
+ }
+
devm_devfreq_register_opp_notifier(dev, data->devfreq);
data->dev = dev;
platform_set_drvdata(pdev, data);
return 0;
+
+err_free_opp:
+ dev_pm_opp_of_remove_table(&pdev->dev);
+ return ret;
+}
+
+static int rk3399_dmcfreq_remove(struct platform_device *pdev)
+{
+ struct rk3399_dmcfreq *dmcfreq = dev_get_drvdata(&pdev->dev);
+
+ /*
+ * Before remove the opp table we need to unregister the opp notifier.
+ */
+ devm_devfreq_unregister_opp_notifier(dmcfreq->dev, dmcfreq->devfreq);
+ dev_pm_opp_of_remove_table(dmcfreq->dev);
+
+ return 0;
}
static const struct of_device_id rk3399dmc_devfreq_of_match[] = {
@@ -451,6 +428,7 @@ MODULE_DEVICE_TABLE(of, rk3399dmc_devfreq_of_match);
static struct platform_driver rk3399_dmcfreq_driver = {
.probe = rk3399_dmcfreq_probe,
+ .remove = rk3399_dmcfreq_remove,
.driver = {
.name = "rk3399-dmc-freq",
.pm = &rk3399_dmcfreq_pm,