diff options
Diffstat (limited to 'drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if')
3 files changed, 86 insertions, 20 deletions
diff --git a/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu14_driver_if_v14_0_0.h b/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu14_driver_if_v14_0_0.h index 5bb7a63c0602..97522c085258 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu14_driver_if_v14_0_0.h +++ b/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu14_driver_if_v14_0_0.h @@ -144,6 +144,37 @@ typedef struct { uint32_t MaxGfxClk; } DpmClocks_t; +//Freq in MHz +//Voltage in milli volts with 2 fractional bits +typedef struct { + uint32_t DcfClocks[NUM_DCFCLK_DPM_LEVELS]; + uint32_t DispClocks[NUM_DISPCLK_DPM_LEVELS]; + uint32_t DppClocks[NUM_DPPCLK_DPM_LEVELS]; + uint32_t SocClocks[NUM_SOCCLK_DPM_LEVELS]; + uint32_t VClocks0[NUM_VCN_DPM_LEVELS]; + uint32_t VClocks1[NUM_VCN_DPM_LEVELS]; + uint32_t DClocks0[NUM_VCN_DPM_LEVELS]; + uint32_t DClocks1[NUM_VCN_DPM_LEVELS]; + uint32_t VPEClocks[NUM_VPE_DPM_LEVELS]; + uint32_t FclkClocks_Freq[NUM_FCLK_DPM_LEVELS]; + uint32_t FclkClocks_Voltage[NUM_FCLK_DPM_LEVELS]; + uint32_t SocVoltage[NUM_SOC_VOLTAGE_LEVELS]; + MemPstateTable_t MemPstateTable[NUM_MEM_PSTATE_LEVELS]; + + uint8_t NumDcfClkLevelsEnabled; + uint8_t NumDispClkLevelsEnabled; //Applies to both Dispclk and Dppclk + uint8_t NumSocClkLevelsEnabled; + uint8_t Vcn0ClkLevelsEnabled; //Applies to both Vclk0 and Dclk0 + uint8_t Vcn1ClkLevelsEnabled; //Applies to both Vclk1 and Dclk1 + uint8_t VpeClkLevelsEnabled; + uint8_t NumMemPstatesEnabled; + uint8_t NumFclkLevelsEnabled; + uint8_t spare; + + uint32_t MinGfxClk; + uint32_t MaxGfxClk; +} DpmClocks_t_v14_0_1; + typedef struct { uint16_t CoreFrequency[16]; //Target core frequency [MHz] uint16_t CorePower[16]; //CAC calculated core power [mW] @@ -224,7 +255,7 @@ typedef enum { #define TABLE_CUSTOM_DPM 2 // Called by Driver #define TABLE_BIOS_GPIO_CONFIG 3 // Called by BIOS #define TABLE_DPMCLOCKS 4 // Called by Driver and VBIOS -#define TABLE_SPARE0 5 // Unused +#define TABLE_MOMENTARY_PM 5 // Called by Tools #define TABLE_MODERN_STDBY 6 // Called by Tools for Modern Standby Log #define TABLE_SMU_METRICS 7 // Called by Driver and SMF/PMF #define TABLE_COUNT 8 diff --git a/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu_v14_0_0_pmfw.h b/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu_v14_0_0_pmfw.h index 356e0f57a426..ddb625860083 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu_v14_0_0_pmfw.h +++ b/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu_v14_0_0_pmfw.h @@ -42,7 +42,7 @@ #define FEATURE_EDC_BIT 7 #define FEATURE_PLL_POWER_DOWN_BIT 8 #define FEATURE_VDDOFF_BIT 9 -#define FEATURE_VCN_DPM_BIT 10 +#define FEATURE_VCN_DPM_BIT 10 /* this is for both VCN0 and VCN1 */ #define FEATURE_DS_MPM_BIT 11 #define FEATURE_FCLK_DPM_BIT 12 #define FEATURE_SOCCLK_DPM_BIT 13 @@ -56,9 +56,9 @@ #define FEATURE_DS_GFXCLK_BIT 21 #define FEATURE_DS_SOCCLK_BIT 22 #define FEATURE_DS_LCLK_BIT 23 -#define FEATURE_LOW_POWER_DCNCLKS_BIT 24 // for all DISP clks +#define FEATURE_LOW_POWER_DCNCLKS_BIT 24 #define FEATURE_DS_SHUBCLK_BIT 25 -#define FEATURE_SPARE0_BIT 26 //SPARE +#define FEATURE_RESERVED0_BIT 26 #define FEATURE_ZSTATES_BIT 27 #define FEATURE_IOMMUL2_PG_BIT 28 #define FEATURE_DS_FCLK_BIT 29 @@ -66,8 +66,8 @@ #define FEATURE_DS_MP1CLK_BIT 31 #define FEATURE_WHISPER_MODE_BIT 32 #define FEATURE_SMU_LOW_POWER_BIT 33 -#define FEATURE_SMART_L3_RINSER_BIT 34 -#define FEATURE_SPARE1_BIT 35 //SPARE +#define FEATURE_RESERVED1_BIT 34 /* v14_0_0 SMART_L3_RINSER; v14_0_1 RESERVED1 */ +#define FEATURE_GFX_DEM_BIT 35 /* v14_0_0 SPARE; v14_0_1 GFX_DEM */ #define FEATURE_PSI_BIT 36 #define FEATURE_PROCHOT_BIT 37 #define FEATURE_CPUOFF_BIT 38 @@ -77,11 +77,11 @@ #define FEATURE_PERF_LIMIT_BIT 42 #define FEATURE_CORE_DLDO_BIT 43 #define FEATURE_DVO_BIT 44 -#define FEATURE_DS_VCN_BIT 45 +#define FEATURE_DS_VCN_BIT 45 /* v14_0_1 this is for both VCN0 and VCN1 */ #define FEATURE_CPPC_BIT 46 #define FEATURE_CPPC_PREFERRED_CORES 47 #define FEATURE_DF_CSTATES_BIT 48 -#define FEATURE_SPARE2_BIT 49 //SPARE +#define FEATURE_FAST_PSTATE_CLDO_BIT 49 /* v14_0_0 SPARE */ #define FEATURE_ATHUB_PG_BIT 50 #define FEATURE_VDDOFF_ECO_BIT 51 #define FEATURE_ZSTATES_ECO_BIT 52 @@ -93,8 +93,8 @@ #define FEATURE_DS_IPUCLK_BIT 58 #define FEATURE_DS_VPECLK_BIT 59 #define FEATURE_VPE_DPM_BIT 60 -#define FEATURE_SPARE_61 61 -#define FEATURE_FP_DIDT 62 +#define FEATURE_SMART_L3_RINSER_BIT 61 /* v14_0_0 SPARE*/ +#define FEATURE_PCC_BIT 62 /* v14_0_0 FP_DIDT v14_0_1 PCC_BIT */ #define NUM_FEATURES 63 // Firmware Header/Footer @@ -151,6 +151,43 @@ typedef struct { // MP1_EXT_SCRATCH7 = RTOS Current Job } FwStatus_t; +typedef struct { + // MP1_EXT_SCRATCH0 + uint32_t DpmHandlerID : 8; + uint32_t ActivityMonitorID : 8; + uint32_t DpmTimerID : 8; + uint32_t DpmHubID : 4; + uint32_t DpmHubTask : 4; + // MP1_EXT_SCRATCH1 + uint32_t CclkSyncStatus : 8; + uint32_t ZstateStatus : 4; + uint32_t Cpu1VddOff : 4; + uint32_t DstateFun : 4; + uint32_t DstateDev : 4; + uint32_t GfxOffStatus : 2; + uint32_t Cpu0Off : 2; + uint32_t Cpu1Off : 2; + uint32_t Cpu0VddOff : 2; + // MP1_EXT_SCRATCH2 + uint32_t P2JobHandler :32; + // MP1_EXT_SCRATCH3 + uint32_t PostCode :32; + // MP1_EXT_SCRATCH4 + uint32_t MsgPortBusy :15; + uint32_t RsmuPmiP1Pending : 1; + uint32_t RsmuPmiP2PendingCnt : 8; + uint32_t DfCstateExitPending : 1; + uint32_t Pc6EntryPending : 1; + uint32_t Pc6ExitPending : 1; + uint32_t WarmResetPending : 1; + uint32_t Mp0ClkPending : 1; + uint32_t InWhisperMode : 1; + uint32_t spare2 : 2; + // MP1_EXT_SCRATCH5 + uint32_t IdleMask :32; + // MP1_EXT_SCRATCH6 = RTOS threads' status + // MP1_EXT_SCRATCH7 = RTOS Current Job +} FwStatus_t_v14_0_1; #pragma pack(pop) diff --git a/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu_v14_0_0_ppsmc.h b/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu_v14_0_0_ppsmc.h index ca7ce4251482..c4dc5881d8df 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu_v14_0_0_ppsmc.h +++ b/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu_v14_0_0_ppsmc.h @@ -72,23 +72,19 @@ #define PPSMC_MSG_SetHardMinSocclkByFreq 0x13 ///< Set hard min for SOC CLK #define PPSMC_MSG_SetSoftMinFclk 0x14 ///< Set hard min for FCLK #define PPSMC_MSG_SetSoftMinVcn0 0x15 ///< Set soft min for VCN0 clocks (VCLK0 and DCLK0) - #define PPSMC_MSG_EnableGfxImu 0x16 ///< Enable GFX IMU - -#define PPSMC_MSG_spare_0x17 0x17 -#define PPSMC_MSG_spare_0x18 0x18 +#define PPSMC_MSG_spare_0x17 0x17 ///< Get GFX clock frequency +#define PPSMC_MSG_spare_0x18 0x18 ///< Get FCLK frequency #define PPSMC_MSG_AllowGfxOff 0x19 ///< Inform PMFW of allowing GFXOFF entry #define PPSMC_MSG_DisallowGfxOff 0x1A ///< Inform PMFW of disallowing GFXOFF entry #define PPSMC_MSG_SetSoftMaxGfxClk 0x1B ///< Set soft max for GFX CLK #define PPSMC_MSG_SetHardMinGfxClk 0x1C ///< Set hard min for GFX CLK - #define PPSMC_MSG_SetSoftMaxSocclkByFreq 0x1D ///< Set soft max for SOC CLK #define PPSMC_MSG_SetSoftMaxFclkByFreq 0x1E ///< Set soft max for FCLK #define PPSMC_MSG_SetSoftMaxVcn0 0x1F ///< Set soft max for VCN0 clocks (VCLK0 and DCLK0) -#define PPSMC_MSG_spare_0x20 0x20 +#define PPSMC_MSG_spare_0x20 0x20 ///< Set power limit percentage #define PPSMC_MSG_PowerDownJpeg0 0x21 ///< Power down Jpeg of VCN0 #define PPSMC_MSG_PowerUpJpeg0 0x22 ///< Power up Jpeg of VCN0; VCN0 is power gated by default - #define PPSMC_MSG_SetHardMinFclkByFreq 0x23 ///< Set hard min for FCLK #define PPSMC_MSG_SetSoftMinSocclkByFreq 0x24 ///< Set soft min for SOC CLK #define PPSMC_MSG_AllowZstates 0x25 ///< Inform PMFM of allowing Zstate entry, i.e. no Miracast activity @@ -99,8 +95,8 @@ #define PPSMC_MSG_PowerUpIspByTile 0x2A ///< This message is used to power up ISP tiles and enable the ISP DPM #define PPSMC_MSG_SetHardMinIspiclkByFreq 0x2B ///< Set HardMin by frequency for ISPICLK #define PPSMC_MSG_SetHardMinIspxclkByFreq 0x2C ///< Set HardMin by frequency for ISPXCLK -#define PPSMC_MSG_PowerDownUmsch 0x2D ///< Power down VCN.UMSCH (aka VSCH) scheduler -#define PPSMC_MSG_PowerUpUmsch 0x2E ///< Power up VCN.UMSCH (aka VSCH) scheduler +#define PPSMC_MSG_PowerDownUmsch 0x2D ///< Power down VCN0.UMSCH (aka VSCH) scheduler +#define PPSMC_MSG_PowerUpUmsch 0x2E ///< Power up VCN0.UMSCH (aka VSCH) scheduler #define PPSMC_Message_IspStutterOn_MmhubPgDis 0x2F ///< ISP StutterOn mmHub PgDis #define PPSMC_Message_IspStutterOff_MmhubPgEn 0x30 ///< ISP StufferOff mmHub PgEn #define PPSMC_MSG_PowerUpVpe 0x31 ///< Power up VPE @@ -110,7 +106,9 @@ #define PPSMC_MSG_DisableLSdma 0x35 ///< Disable LSDMA #define PPSMC_MSG_SetSoftMaxVpe 0x36 ///< #define PPSMC_MSG_SetSoftMinVpe 0x37 ///< -#define PPSMC_Message_Count 0x38 ///< Total number of PPSMC messages +#define PPSMC_MSG_AllocMALLCache 0x38 ///< Allocating MALL Cache +#define PPSMC_MSG_ReleaseMALLCache 0x39 ///< Releasing MALL Cache +#define PPSMC_Message_Count 0x3A ///< Total number of PPSMC messages /** @}*/ /** |