diff options
Diffstat (limited to 'drivers/gpu/drm/i915/intel_vbt_defs.h')
| -rw-r--r-- | drivers/gpu/drm/i915/intel_vbt_defs.h | 339 |
1 files changed, 195 insertions, 144 deletions
diff --git a/drivers/gpu/drm/i915/intel_vbt_defs.h b/drivers/gpu/drm/i915/intel_vbt_defs.h index a92e7762f596..f225c288a121 100644 --- a/drivers/gpu/drm/i915/intel_vbt_defs.h +++ b/drivers/gpu/drm/i915/intel_vbt_defs.h @@ -149,16 +149,19 @@ struct bdb_general_features { u8 ssc_freq:1; u8 enable_lfp_on_override:1; u8 disable_ssc_ddt:1; - u8 rsvd7:1; + u8 underscan_vga_timings:1; u8 display_clock_mode:1; - u8 rsvd8:1; /* finish byte */ + u8 vbios_hotplug_support:1; /* bits 3 */ u8 disable_smooth_vision:1; u8 single_dvi:1; - u8 rsvd9:1; + u8 rotate_180:1; /* 181 */ u8 fdi_rx_polarity_inverted:1; - u8 rsvd10:4; /* finish byte */ + u8 vbios_extended_mode:1; /* 160 */ + u8 copy_ilfp_dtd_to_sdvo_lvds_dtd:1; /* 160 */ + u8 panel_best_fit_timing:1; /* 160 */ + u8 ignore_strap_state:1; /* 160 */ /* bits 4 */ u8 legacy_monitor_detect; @@ -167,9 +170,10 @@ struct bdb_general_features { u8 int_crt_support:1; u8 int_tv_support:1; u8 int_efp_support:1; - u8 dp_ssc_enb:1; /* PCH attached eDP supports SSC */ + u8 dp_ssc_enable:1; /* PCH attached eDP supports SSC */ u8 dp_ssc_freq:1; /* SSC freq for PCH attached eDP */ - u8 rsvd11:3; /* finish byte */ + u8 dp_ssc_dongle_supported:1; + u8 rsvd11:2; /* finish byte */ } __packed; /* pre-915 */ @@ -206,6 +210,56 @@ struct bdb_general_features { #define DEVICE_TYPE_LFP_LVDS_DUAL 0x5162 #define DEVICE_TYPE_LFP_LVDS_DUAL_HDCP 0x51e2 +/* Add the device class for LFP, TV, HDMI */ +#define DEVICE_TYPE_INT_LFP 0x1022 +#define DEVICE_TYPE_INT_TV 0x1009 +#define DEVICE_TYPE_HDMI 0x60D2 +#define DEVICE_TYPE_DP 0x68C6 +#define DEVICE_TYPE_DP_DUAL_MODE 0x60D6 +#define DEVICE_TYPE_eDP 0x78C6 + +#define DEVICE_TYPE_CLASS_EXTENSION (1 << 15) +#define DEVICE_TYPE_POWER_MANAGEMENT (1 << 14) +#define DEVICE_TYPE_HOTPLUG_SIGNALING (1 << 13) +#define DEVICE_TYPE_INTERNAL_CONNECTOR (1 << 12) +#define DEVICE_TYPE_NOT_HDMI_OUTPUT (1 << 11) +#define DEVICE_TYPE_MIPI_OUTPUT (1 << 10) +#define DEVICE_TYPE_COMPOSITE_OUTPUT (1 << 9) +#define DEVICE_TYPE_DUAL_CHANNEL (1 << 8) +#define DEVICE_TYPE_HIGH_SPEED_LINK (1 << 6) +#define DEVICE_TYPE_LVDS_SINGALING (1 << 5) +#define DEVICE_TYPE_TMDS_DVI_SIGNALING (1 << 4) +#define DEVICE_TYPE_VIDEO_SIGNALING (1 << 3) +#define DEVICE_TYPE_DISPLAYPORT_OUTPUT (1 << 2) +#define DEVICE_TYPE_DIGITAL_OUTPUT (1 << 1) +#define DEVICE_TYPE_ANALOG_OUTPUT (1 << 0) + +/* + * Bits we care about when checking for DEVICE_TYPE_eDP. Depending on the + * system, the other bits may or may not be set for eDP outputs. + */ +#define DEVICE_TYPE_eDP_BITS \ + (DEVICE_TYPE_INTERNAL_CONNECTOR | \ + DEVICE_TYPE_MIPI_OUTPUT | \ + DEVICE_TYPE_COMPOSITE_OUTPUT | \ + DEVICE_TYPE_DUAL_CHANNEL | \ + DEVICE_TYPE_LVDS_SINGALING | \ + DEVICE_TYPE_TMDS_DVI_SIGNALING | \ + DEVICE_TYPE_VIDEO_SIGNALING | \ + DEVICE_TYPE_DISPLAYPORT_OUTPUT | \ + DEVICE_TYPE_ANALOG_OUTPUT) + +#define DEVICE_TYPE_DP_DUAL_MODE_BITS \ + (DEVICE_TYPE_INTERNAL_CONNECTOR | \ + DEVICE_TYPE_MIPI_OUTPUT | \ + DEVICE_TYPE_COMPOSITE_OUTPUT | \ + DEVICE_TYPE_LVDS_SINGALING | \ + DEVICE_TYPE_TMDS_DVI_SIGNALING | \ + DEVICE_TYPE_VIDEO_SIGNALING | \ + DEVICE_TYPE_DISPLAYPORT_OUTPUT | \ + DEVICE_TYPE_DIGITAL_OUTPUT | \ + DEVICE_TYPE_ANALOG_OUTPUT) + #define DEVICE_CFG_NONE 0x00 #define DEVICE_CFG_12BIT_DVOB 0x01 #define DEVICE_CFG_12BIT_DVOC 0x02 @@ -226,77 +280,134 @@ struct bdb_general_features { #define DEVICE_WIRE_DVOB_MASTER 0x0d #define DEVICE_WIRE_DVOC_MASTER 0x0e +/* dvo_port pre BDB 155 */ #define DEVICE_PORT_DVOA 0x00 /* none on 845+ */ #define DEVICE_PORT_DVOB 0x01 #define DEVICE_PORT_DVOC 0x02 +/* dvo_port BDB 155+ */ +#define DVO_PORT_HDMIA 0 +#define DVO_PORT_HDMIB 1 +#define DVO_PORT_HDMIC 2 +#define DVO_PORT_HDMID 3 +#define DVO_PORT_LVDS 4 +#define DVO_PORT_TV 5 +#define DVO_PORT_CRT 6 +#define DVO_PORT_DPB 7 +#define DVO_PORT_DPC 8 +#define DVO_PORT_DPD 9 +#define DVO_PORT_DPA 10 +#define DVO_PORT_DPE 11 /* 193 */ +#define DVO_PORT_HDMIE 12 /* 193 */ +#define DVO_PORT_MIPIA 21 /* 171 */ +#define DVO_PORT_MIPIB 22 /* 171 */ +#define DVO_PORT_MIPIC 23 /* 171 */ +#define DVO_PORT_MIPID 24 /* 171 */ + +#define LEGACY_CHILD_DEVICE_CONFIG_SIZE 33 + +/* DDC Bus DDI Type 155+ */ +enum vbt_gmbus_ddi { + DDC_BUS_DDI_B = 0x1, + DDC_BUS_DDI_C, + DDC_BUS_DDI_D, + DDC_BUS_DDI_F, +}; + /* - * We used to keep this struct but without any version control. We should avoid - * using it in the future, but it should be safe to keep using it in the old - * code. Do not change; we rely on its size. + * The child device config, aka the display device data structure, provides a + * description of a port and its configuration on the platform. + * + * The child device config size has been increased, and fields have been added + * and their meaning has changed over time. Care must be taken when accessing + * basically any of the fields to ensure the correct interpretation for the BDB + * version in question. + * + * When we copy the child device configs to dev_priv->vbt.child_dev, we reserve + * space for the full structure below, and initialize the tail not actually + * present in VBT to zeros. Accessing those fields is fine, as long as the + * default zero is taken into account, again according to the BDB version. + * + * BDB versions 155 and below are considered legacy, and version 155 seems to be + * a baseline for some of the VBT documentation. When adding new fields, please + * include the BDB version when the field was added, if it's above that. */ -struct old_child_dev_config { +struct child_device_config { u16 handle; - u16 device_type; - u8 device_id[10]; /* ascii string */ - u16 addin_offset; - u8 dvo_port; /* See Device_PORT_* above */ - u8 i2c_pin; - u8 slave_addr; - u8 ddc_pin; - u16 edid_ptr; - u8 dvo_cfg; /* See DEVICE_CFG_* above */ - u8 dvo2_port; - u8 i2c2_pin; - u8 slave2_addr; - u8 ddc2_pin; - u8 capabilities; - u8 dvo_wiring;/* See DEVICE_WIRE_* above */ - u8 dvo2_wiring; - u16 extended_type; - u8 dvo_function; -} __packed; + u16 device_type; /* See DEVICE_TYPE_* above */ + + union { + u8 device_id[10]; /* ascii string */ + struct { + u8 i2c_speed; + u8 dp_onboard_redriver; /* 158 */ + u8 dp_ondock_redriver; /* 158 */ + u8 hdmi_level_shifter_value:4; /* 169 */ + u8 hdmi_max_data_rate:4; /* 204 */ + u16 dtd_buf_ptr; /* 161 */ + u8 edidless_efp:1; /* 161 */ + u8 compression_enable:1; /* 198 */ + u8 compression_method:1; /* 198 */ + u8 ganged_edp:1; /* 202 */ + u8 reserved0:4; + u8 compression_structure_index:4; /* 198 */ + u8 reserved1:4; + u8 slave_port; /* 202 */ + u8 reserved2; + } __packed; + } __packed; -/* This one contains field offsets that are known to be common for all BDB - * versions. Notice that the meaning of the contents contents may still change, - * but at least the offsets are consistent. */ - -struct common_child_dev_config { - u16 handle; - u16 device_type; - u8 not_common1[12]; - u8 dvo_port; - u8 not_common2[2]; + u16 addin_offset; + u8 dvo_port; /* See DEVICE_PORT_* and DVO_PORT_* above */ + u8 i2c_pin; + u8 slave_addr; u8 ddc_pin; u16 edid_ptr; u8 dvo_cfg; /* See DEVICE_CFG_* above */ - u8 efp_routed:1; - u8 lane_reversal:1; - u8 lspcon:1; - u8 iboost:1; - u8 hpd_invert:1; - u8 flag_reserved:3; - u8 hdmi_support:1; - u8 dp_support:1; - u8 tmds_support:1; - u8 support_reserved:5; - u8 aux_channel; - u8 not_common3[11]; - u8 iboost_level; -} __packed; + union { + struct { + u8 dvo2_port; + u8 i2c2_pin; + u8 slave2_addr; + u8 ddc2_pin; + } __packed; + struct { + u8 efp_routed:1; /* 158 */ + u8 lane_reversal:1; /* 184 */ + u8 lspcon:1; /* 192 */ + u8 iboost:1; /* 196 */ + u8 hpd_invert:1; /* 196 */ + u8 flag_reserved:3; + u8 hdmi_support:1; /* 158 */ + u8 dp_support:1; /* 158 */ + u8 tmds_support:1; /* 158 */ + u8 support_reserved:5; + u8 aux_channel; + u8 dongle_detect; + } __packed; + } __packed; + + u8 pipe_cap:2; + u8 sdvo_stall:1; /* 158 */ + u8 hpd_status:2; + u8 integrated_encoder:1; + u8 capabilities_reserved:2; + u8 dvo_wiring; /* See DEVICE_WIRE_* above */ + + union { + u8 dvo2_wiring; + u8 mipi_bridge_type; /* 171 */ + } __packed; -/* This field changes depending on the BDB version, so the most reliable way to - * read it is by checking the BDB version and reading the raw pointer. */ -union child_device_config { - /* This one is safe to be used anywhere, but the code should still check - * the BDB version. */ - u8 raw[33]; - /* This one should only be kept for legacy code. */ - struct old_child_dev_config old; - /* This one should also be safe to use anywhere, even without version - * checks. */ - struct common_child_dev_config common; + u16 extended_type; + u8 dvo_function; + u8 dp_usb_type_c:1; /* 195 */ + u8 flags2_reserved:7; /* 195 */ + u8 dp_gpio_index; /* 195 */ + u16 dp_gpio_pin_num; /* 195 */ + u8 dp_iboost_level:4; /* 196 */ + u8 hdmi_iboost_level:4; /* 196 */ } __packed; struct bdb_general_definitions { @@ -585,23 +696,38 @@ struct bdb_driver_features { #define EDP_VSWING_1_2V 3 -struct edp_link_params { +struct edp_fast_link_params { u8 rate:4; u8 lanes:4; u8 preemphasis:4; u8 vswing:4; } __packed; +struct edp_pwm_delays { + u16 pwm_on_to_backlight_enable; + u16 backlight_disable_to_pwm_off; +} __packed; + +struct edp_full_link_params { + u8 preemphasis:4; + u8 vswing:4; +} __packed; + struct bdb_edp { struct edp_power_seq power_seqs[16]; u32 color_depth; - struct edp_link_params link_params[16]; + struct edp_fast_link_params fast_link_params[16]; u32 sdrrs_msa_timing_delay; /* ith bit indicates enabled/disabled for (i+1)th panel */ - u16 edp_s3d_feature; - u16 edp_t3_optimization; - u64 edp_vswing_preemph; /* v173 */ + u16 edp_s3d_feature; /* 162 */ + u16 edp_t3_optimization; /* 165 */ + u64 edp_vswing_preemph; /* 173 */ + u16 fast_link_training; /* 182 */ + u16 dpcd_600h_write_required; /* 185 */ + struct edp_pwm_delays pwm_delays[16]; /* 186 */ + u16 full_link_params_provided; /* 199 */ + struct edp_full_link_params full_link_params[16]; /* 199 */ } __packed; struct psr_table { @@ -745,81 +871,6 @@ struct bdb_psr { #define SWF14_APM_STANDBY 0x1 #define SWF14_APM_RESTORE 0x0 -/* Add the device class for LFP, TV, HDMI */ -#define DEVICE_TYPE_INT_LFP 0x1022 -#define DEVICE_TYPE_INT_TV 0x1009 -#define DEVICE_TYPE_HDMI 0x60D2 -#define DEVICE_TYPE_DP 0x68C6 -#define DEVICE_TYPE_DP_DUAL_MODE 0x60D6 -#define DEVICE_TYPE_eDP 0x78C6 - -#define DEVICE_TYPE_CLASS_EXTENSION (1 << 15) -#define DEVICE_TYPE_POWER_MANAGEMENT (1 << 14) -#define DEVICE_TYPE_HOTPLUG_SIGNALING (1 << 13) -#define DEVICE_TYPE_INTERNAL_CONNECTOR (1 << 12) -#define DEVICE_TYPE_NOT_HDMI_OUTPUT (1 << 11) -#define DEVICE_TYPE_MIPI_OUTPUT (1 << 10) -#define DEVICE_TYPE_COMPOSITE_OUTPUT (1 << 9) -#define DEVICE_TYPE_DUAL_CHANNEL (1 << 8) -#define DEVICE_TYPE_HIGH_SPEED_LINK (1 << 6) -#define DEVICE_TYPE_LVDS_SINGALING (1 << 5) -#define DEVICE_TYPE_TMDS_DVI_SIGNALING (1 << 4) -#define DEVICE_TYPE_VIDEO_SIGNALING (1 << 3) -#define DEVICE_TYPE_DISPLAYPORT_OUTPUT (1 << 2) -#define DEVICE_TYPE_DIGITAL_OUTPUT (1 << 1) -#define DEVICE_TYPE_ANALOG_OUTPUT (1 << 0) - -/* - * Bits we care about when checking for DEVICE_TYPE_eDP - * Depending on the system, the other bits may or may not - * be set for eDP outputs. - */ -#define DEVICE_TYPE_eDP_BITS \ - (DEVICE_TYPE_INTERNAL_CONNECTOR | \ - DEVICE_TYPE_MIPI_OUTPUT | \ - DEVICE_TYPE_COMPOSITE_OUTPUT | \ - DEVICE_TYPE_DUAL_CHANNEL | \ - DEVICE_TYPE_LVDS_SINGALING | \ - DEVICE_TYPE_TMDS_DVI_SIGNALING | \ - DEVICE_TYPE_VIDEO_SIGNALING | \ - DEVICE_TYPE_DISPLAYPORT_OUTPUT | \ - DEVICE_TYPE_ANALOG_OUTPUT) - -#define DEVICE_TYPE_DP_DUAL_MODE_BITS \ - (DEVICE_TYPE_INTERNAL_CONNECTOR | \ - DEVICE_TYPE_MIPI_OUTPUT | \ - DEVICE_TYPE_COMPOSITE_OUTPUT | \ - DEVICE_TYPE_LVDS_SINGALING | \ - DEVICE_TYPE_TMDS_DVI_SIGNALING | \ - DEVICE_TYPE_VIDEO_SIGNALING | \ - DEVICE_TYPE_DISPLAYPORT_OUTPUT | \ - DEVICE_TYPE_DIGITAL_OUTPUT | \ - DEVICE_TYPE_ANALOG_OUTPUT) - -/* define the DVO port for HDMI output type */ -#define DVO_B 1 -#define DVO_C 2 -#define DVO_D 3 - -/* Possible values for the "DVO Port" field for versions >= 155: */ -#define DVO_PORT_HDMIA 0 -#define DVO_PORT_HDMIB 1 -#define DVO_PORT_HDMIC 2 -#define DVO_PORT_HDMID 3 -#define DVO_PORT_LVDS 4 -#define DVO_PORT_TV 5 -#define DVO_PORT_CRT 6 -#define DVO_PORT_DPB 7 -#define DVO_PORT_DPC 8 -#define DVO_PORT_DPD 9 -#define DVO_PORT_DPA 10 -#define DVO_PORT_DPE 11 -#define DVO_PORT_HDMIE 12 -#define DVO_PORT_MIPIA 21 -#define DVO_PORT_MIPIB 22 -#define DVO_PORT_MIPIC 23 -#define DVO_PORT_MIPID 24 - /* Block 52 contains MIPI configuration block * 6 * bdb_mipi_config, followed by 6 pps data block * block below |