summaryrefslogtreecommitdiffstats
path: root/drivers/hwmon/aquacomputer_d5next.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/hwmon/aquacomputer_d5next.c')
-rw-r--r--drivers/hwmon/aquacomputer_d5next.c37
1 files changed, 36 insertions, 1 deletions
diff --git a/drivers/hwmon/aquacomputer_d5next.c b/drivers/hwmon/aquacomputer_d5next.c
index a997dbcb563f..023807859be7 100644
--- a/drivers/hwmon/aquacomputer_d5next.c
+++ b/drivers/hwmon/aquacomputer_d5next.c
@@ -13,9 +13,11 @@
#include <linux/crc16.h>
#include <linux/debugfs.h>
+#include <linux/delay.h>
#include <linux/hid.h>
#include <linux/hwmon.h>
#include <linux/jiffies.h>
+#include <linux/ktime.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/seq_file.h>
@@ -63,6 +65,8 @@ static const char *const aqc_device_names[] = {
#define CTRL_REPORT_ID 0x03
#define AQUAERO_CTRL_REPORT_ID 0x0b
+#define CTRL_REPORT_DELAY 200 /* ms */
+
/* The HID report that the official software always sends
* after writing values, currently same for all devices
*/
@@ -527,6 +531,9 @@ struct aqc_data {
int secondary_ctrl_report_size;
u8 *secondary_ctrl_report;
+ ktime_t last_ctrl_report_op;
+ int ctrl_report_delay; /* Delay between two ctrl report operations, in ms */
+
int buffer_size;
u8 *buffer;
int checksum_start;
@@ -611,17 +618,35 @@ static int aqc_aquastreamxt_convert_fan_rpm(u16 val)
return 0;
}
+static void aqc_delay_ctrl_report(struct aqc_data *priv)
+{
+ /*
+ * If previous read or write is too close to this one, delay the current operation
+ * to give the device enough time to process the previous one.
+ */
+ if (priv->ctrl_report_delay) {
+ s64 delta = ktime_ms_delta(ktime_get(), priv->last_ctrl_report_op);
+
+ if (delta < priv->ctrl_report_delay)
+ msleep(priv->ctrl_report_delay - delta);
+ }
+}
+
/* Expects the mutex to be locked */
static int aqc_get_ctrl_data(struct aqc_data *priv)
{
int ret;
+ aqc_delay_ctrl_report(priv);
+
memset(priv->buffer, 0x00, priv->buffer_size);
ret = hid_hw_raw_request(priv->hdev, priv->ctrl_report_id, priv->buffer, priv->buffer_size,
HID_FEATURE_REPORT, HID_REQ_GET_REPORT);
if (ret < 0)
ret = -ENODATA;
+ priv->last_ctrl_report_op = ktime_get();
+
return ret;
}
@@ -631,6 +656,8 @@ static int aqc_send_ctrl_data(struct aqc_data *priv)
int ret;
u16 checksum;
+ aqc_delay_ctrl_report(priv);
+
/* Checksum is not needed for Aquaero */
if (priv->kind != aquaero) {
/* Init and xorout value for CRC-16/USB is 0xffff */
@@ -646,12 +673,16 @@ static int aqc_send_ctrl_data(struct aqc_data *priv)
ret = hid_hw_raw_request(priv->hdev, priv->ctrl_report_id, priv->buffer, priv->buffer_size,
HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
if (ret < 0)
- return ret;
+ goto record_access_and_ret;
/* The official software sends this report after every change, so do it here as well */
ret = hid_hw_raw_request(priv->hdev, priv->secondary_ctrl_report_id,
priv->secondary_ctrl_report, priv->secondary_ctrl_report_size,
HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
+
+record_access_and_ret:
+ priv->last_ctrl_report_op = ktime_get();
+
return ret;
}
@@ -1524,6 +1555,7 @@ static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id)
priv->buffer_size = AQUAERO_CTRL_REPORT_SIZE;
priv->temp_ctrl_offset = AQUAERO_TEMP_CTRL_OFFSET;
+ priv->ctrl_report_delay = CTRL_REPORT_DELAY;
priv->temp_label = label_temp_sensors;
priv->virtual_temp_label = label_virtual_temp_sensors;
@@ -1547,6 +1579,7 @@ static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id)
priv->temp_ctrl_offset = D5NEXT_TEMP_CTRL_OFFSET;
priv->buffer_size = D5NEXT_CTRL_REPORT_SIZE;
+ priv->ctrl_report_delay = CTRL_REPORT_DELAY;
priv->power_cycle_count_offset = D5NEXT_POWER_CYCLES;
@@ -1597,6 +1630,7 @@ static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id)
priv->temp_ctrl_offset = OCTO_TEMP_CTRL_OFFSET;
priv->buffer_size = OCTO_CTRL_REPORT_SIZE;
+ priv->ctrl_report_delay = CTRL_REPORT_DELAY;
priv->power_cycle_count_offset = OCTO_POWER_CYCLES;
@@ -1624,6 +1658,7 @@ static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id)
priv->temp_ctrl_offset = QUADRO_TEMP_CTRL_OFFSET;
priv->buffer_size = QUADRO_CTRL_REPORT_SIZE;
+ priv->ctrl_report_delay = CTRL_REPORT_DELAY;
priv->flow_pulses_ctrl_offset = QUADRO_FLOW_PULSES_CTRL_OFFSET;
priv->power_cycle_count_offset = QUADRO_POWER_CYCLES;