summaryrefslogtreecommitdiffstats
path: root/drivers/ide/pci/sc1200.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ide/pci/sc1200.c')
-rw-r--r--drivers/ide/pci/sc1200.c161
1 files changed, 77 insertions, 84 deletions
diff --git a/drivers/ide/pci/sc1200.c b/drivers/ide/pci/sc1200.c
index b5ae0c50e216..523363c93794 100644
--- a/drivers/ide/pci/sc1200.c
+++ b/drivers/ide/pci/sc1200.c
@@ -1,7 +1,9 @@
/*
- * linux/drivers/ide/pci/sc1200.c Version 0.91 28-Jan-2003
+ * linux/drivers/ide/pci/sc1200.c Version 0.94 Mar 10 2007
*
* Copyright (C) 2000-2002 Mark Lord <mlord@pobox.com>
+ * Copyright (C) 2007 Bartlomiej Zolnierkiewicz
+ *
* May be copied or modified under the terms of the GNU General Public License
*
* Development of this chipset driver was funded
@@ -93,64 +95,50 @@ static const unsigned int sc1200_pio_timings[4][5] =
*/
//#define SC1200_BAD_PIO(timings) (((timings)&~0x80000000)==0x00009172)
-static int sc1200_autoselect_dma_mode (ide_drive_t *drive)
+static void sc1200_tunepio(ide_drive_t *drive, u8 pio)
{
- int udma_ok = 1, mode = 0;
- ide_hwif_t *hwif = HWIF(drive);
- int unit = drive->select.b.unit;
- ide_drive_t *mate = &hwif->drives[unit^1];
- struct hd_driveid *id = drive->id;
-
- /*
- * The SC1200 specifies that two drives sharing a cable cannot
- * mix UDMA/MDMA. It has to be one or the other, for the pair,
- * though different timings can still be chosen for each drive.
- * We could set the appropriate timing bits on the fly,
- * but that might be a bit confusing. So, for now we statically
- * handle this requirement by looking at our mate drive to see
- * what it is capable of, before choosing a mode for our own drive.
- */
- if (mate->present) {
- struct hd_driveid *mateid = mate->id;
- if (mateid && (mateid->capability & 1) && !__ide_dma_bad_drive(mate)) {
- if ((mateid->field_valid & 4) && (mateid->dma_ultra & 7))
- udma_ok = 1;
- else if ((mateid->field_valid & 2) && (mateid->dma_mword & 7))
- udma_ok = 0;
- else
- udma_ok = 1;
- }
- }
- /*
- * Now see what the current drive is capable of,
- * selecting UDMA only if the mate said it was ok.
- */
- if (id && (id->capability & 1) && hwif->autodma && !__ide_dma_bad_drive(drive)) {
- if (udma_ok && (id->field_valid & 4) && (id->dma_ultra & 7)) {
- if (id->dma_ultra & 4)
- mode = XFER_UDMA_2;
- else if (id->dma_ultra & 2)
- mode = XFER_UDMA_1;
- else if (id->dma_ultra & 1)
- mode = XFER_UDMA_0;
- }
- if (!mode && (id->field_valid & 2) && (id->dma_mword & 7)) {
- if (id->dma_mword & 4)
- mode = XFER_MW_DMA_2;
- else if (id->dma_mword & 2)
- mode = XFER_MW_DMA_1;
- else if (id->dma_mword & 1)
- mode = XFER_MW_DMA_0;
- }
- }
- return mode;
+ ide_hwif_t *hwif = drive->hwif;
+ struct pci_dev *pdev = hwif->pci_dev;
+ unsigned int basereg = hwif->channel ? 0x50 : 0x40, format = 0;
+
+ pci_read_config_dword(pdev, basereg + 4, &format);
+ format = (format >> 31) & 1;
+ if (format)
+ format += sc1200_get_pci_clock();
+ pci_write_config_dword(pdev, basereg + ((drive->dn & 1) << 3),
+ sc1200_pio_timings[format][pio]);
}
/*
- * sc1200_config_dma2() handles selection/setting of DMA/UDMA modes
- * for both the chipset and drive.
+ * The SC1200 specifies that two drives sharing a cable cannot mix
+ * UDMA/MDMA. It has to be one or the other, for the pair, though
+ * different timings can still be chosen for each drive. We could
+ * set the appropriate timing bits on the fly, but that might be
+ * a bit confusing. So, for now we statically handle this requirement
+ * by looking at our mate drive to see what it is capable of, before
+ * choosing a mode for our own drive.
*/
-static int sc1200_config_dma2 (ide_drive_t *drive, int mode)
+static u8 sc1200_udma_filter(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ ide_drive_t *mate = &hwif->drives[(drive->dn & 1) ^ 1];
+ struct hd_driveid *mateid = mate->id;
+ u8 mask = hwif->ultra_mask;
+
+ if (mate->present == 0)
+ goto out;
+
+ if ((mateid->capability & 1) && __ide_dma_bad_drive(mate) == 0) {
+ if ((mateid->field_valid & 4) && (mateid->dma_ultra & 7))
+ goto out;
+ if ((mateid->field_valid & 2) && (mateid->dma_mword & 7))
+ mask = 0;
+ }
+out:
+ return mask;
+}
+
+static int sc1200_tune_chipset(ide_drive_t *drive, u8 mode)
{
ide_hwif_t *hwif = HWIF(drive);
int unit = drive->select.b.unit;
@@ -158,20 +146,26 @@ static int sc1200_config_dma2 (ide_drive_t *drive, int mode)
unsigned short pci_clock;
unsigned int basereg = hwif->channel ? 0x50 : 0x40;
- /*
- * Default to DMA-off in case we run into trouble here.
- */
- hwif->dma_off_quietly(drive); /* turn off DMA while we fiddle */
- outb(inb(hwif->dma_base+2)&~(unit?0x40:0x20), hwif->dma_base+2); /* clear DMA_capable bit */
+ mode = ide_rate_filter(drive, mode);
/*
* Tell the drive to switch to the new mode; abort on failure.
*/
- if (!mode || sc1200_set_xfer_mode(drive, mode)) {
+ if (sc1200_set_xfer_mode(drive, mode)) {
printk("SC1200: set xfer mode failure\n");
return 1; /* failure */
}
+ switch (mode) {
+ case XFER_PIO_4:
+ case XFER_PIO_3:
+ case XFER_PIO_2:
+ case XFER_PIO_1:
+ case XFER_PIO_0:
+ sc1200_tunepio(drive, mode - XFER_PIO_0);
+ return 0;
+ }
+
pci_clock = sc1200_get_pci_clock();
/*
@@ -224,11 +218,9 @@ static int sc1200_config_dma2 (ide_drive_t *drive, int mode)
case PCI_CLK_66: timings = 0x00015151; break;
}
break;
- }
-
- if (timings == 0) {
- printk("%s: sc1200_config_dma: huh? mode=%02x clk=%x \n", drive->name, mode, pci_clock);
- return 1; /* failure */
+ default:
+ BUG();
+ break;
}
if (unit == 0) { /* are we configuring drive0? */
@@ -239,8 +231,6 @@ static int sc1200_config_dma2 (ide_drive_t *drive, int mode)
pci_write_config_dword(hwif->pci_dev, basereg+12, timings);
}
- outb(inb(hwif->dma_base+2)|(unit?0x40:0x20), hwif->dma_base+2); /* set DMA_capable bit */
-
return 0; /* success */
}
@@ -250,7 +240,10 @@ static int sc1200_config_dma2 (ide_drive_t *drive, int mode)
*/
static int sc1200_config_dma (ide_drive_t *drive)
{
- return sc1200_config_dma2(drive, sc1200_autoselect_dma_mode(drive));
+ if (ide_tune_dma(drive))
+ return 0;
+
+ return 1;
}
@@ -290,10 +283,11 @@ static int sc1200_ide_dma_end (ide_drive_t *drive)
static void sc1200_tuneproc (ide_drive_t *drive, byte pio) /* mode=255 means "autotune" */
{
ide_hwif_t *hwif = HWIF(drive);
- unsigned int format;
- static byte modes[5] = {XFER_PIO_0, XFER_PIO_1, XFER_PIO_2, XFER_PIO_3, XFER_PIO_4};
int mode = -1;
+ /*
+ * bad abuse of ->tuneproc interface
+ */
switch (pio) {
case 200: mode = XFER_UDMA_0; break;
case 201: mode = XFER_UDMA_1; break;
@@ -304,20 +298,17 @@ static void sc1200_tuneproc (ide_drive_t *drive, byte pio) /* mode=255 means "au
}
if (mode != -1) {
printk("SC1200: %s: changing (U)DMA mode\n", drive->name);
- (void)sc1200_config_dma2(drive, mode);
+ hwif->dma_off_quietly(drive);
+ if (sc1200_tune_chipset(drive, mode) == 0)
+ hwif->dma_host_on(drive);
return;
}
pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
printk("SC1200: %s: setting PIO mode%d\n", drive->name, pio);
- if (!sc1200_set_xfer_mode(drive, modes[pio])) {
- unsigned int basereg = hwif->channel ? 0x50 : 0x40;
- pci_read_config_dword (hwif->pci_dev, basereg+4, &format);
- format = (format >> 31) & 1;
- if (format)
- format += sc1200_get_pci_clock();
- pci_write_config_dword(hwif->pci_dev, basereg + (drive->select.b.unit << 3), sc1200_pio_timings[format][pio]);
- }
+
+ if (sc1200_set_xfer_mode(drive, XFER_PIO_0 + pio) == 0)
+ sc1200_tunepio(drive, pio);
}
#ifdef CONFIG_PM
@@ -438,12 +429,12 @@ static int sc1200_resume (struct pci_dev *dev)
for (d = 0; d < MAX_DRIVES; ++d) {
ide_drive_t *drive = &(hwif->drives[d]);
if (drive->present && !__ide_dma_bad_drive(drive)) {
- int was_using_dma = drive->using_dma;
+ int enable_dma = drive->using_dma;
hwif->dma_off_quietly(drive);
- sc1200_config_dma(drive);
- if (!was_using_dma && drive->using_dma) {
- hwif->dma_off_quietly(drive);
- }
+ if (sc1200_config_dma(drive))
+ enable_dma = 0;
+ if (enable_dma)
+ hwif->dma_host_on(drive);
}
}
}
@@ -461,11 +452,13 @@ static void __devinit init_hwif_sc1200 (ide_hwif_t *hwif)
hwif->serialized = hwif->mate->serialized = 1;
hwif->autodma = 0;
if (hwif->dma_base) {
+ hwif->udma_filter = sc1200_udma_filter;
hwif->ide_dma_check = &sc1200_config_dma;
hwif->ide_dma_end = &sc1200_ide_dma_end;
if (!noautodma)
hwif->autodma = 1;
hwif->tuneproc = &sc1200_tuneproc;
+ hwif->speedproc = &sc1200_tune_chipset;
}
hwif->atapi_dma = 1;
hwif->ultra_mask = 0x07;