summaryrefslogtreecommitdiffstats
path: root/drivers/isdn/hisax/sedlbauer_cs.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/isdn/hisax/sedlbauer_cs.c')
-rw-r--r--drivers/isdn/hisax/sedlbauer_cs.c168
1 files changed, 10 insertions, 158 deletions
diff --git a/drivers/isdn/hisax/sedlbauer_cs.c b/drivers/isdn/hisax/sedlbauer_cs.c
index a024192b672a..360204bc2777 100644
--- a/drivers/isdn/hisax/sedlbauer_cs.c
+++ b/drivers/isdn/hisax/sedlbauer_cs.c
@@ -46,7 +46,6 @@
#include <asm/io.h>
#include <asm/system.h>
-#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/cisreg.h>
#include <pcmcia/ds.h>
@@ -64,26 +63,9 @@ MODULE_LICENSE("Dual MPL/GPL");
static int protocol = 2; /* EURO-ISDN Default */
module_param(protocol, int, 0);
-/*====================================================================*/
-
-/*
- The event() function is this driver's Card Services event handler.
- It will be called by Card Services when an appropriate card status
- event is received. The config() and release() entry points are
- used to configure or release a socket, in response to card
- insertion and ejection events. They are invoked from the sedlbauer
- event handler.
-*/
-
static int sedlbauer_config(struct pcmcia_device *link) __devinit ;
static void sedlbauer_release(struct pcmcia_device *link);
-/*
- The attach() and detach() entry points are used to create and destroy
- "instances" of the driver, where each instance represents everything
- needed to manage one actual PCMCIA card.
-*/
-
static void sedlbauer_detach(struct pcmcia_device *p_dev) __devexit;
typedef struct local_info_t {
@@ -92,18 +74,6 @@ typedef struct local_info_t {
int cardnr;
} local_info_t;
-/*======================================================================
-
- sedlbauer_attach() creates an "instance" of the driver, allocating
- local data structures for one device. The device is registered
- with Card Services.
-
- The dev_link structure is initialized, but we don't actually
- configure the card at this point -- we wait until we receive a
- card insertion event.
-
-======================================================================*/
-
static int __devinit sedlbauer_probe(struct pcmcia_device *link)
{
local_info_t *local;
@@ -118,35 +88,9 @@ static int __devinit sedlbauer_probe(struct pcmcia_device *link)
local->p_dev = link;
link->priv = local;
- /*
- General socket configuration defaults can go here. In this
- client, we assume very little, and rely on the CIS for almost
- everything. In most clients, many details (i.e., number, sizes,
- and attributes of IO windows) are fixed by the nature of the
- device, and can be hard-wired here.
- */
-
- /* from old sedl_cs
- */
- /* The io structure describes IO port mapping */
- link->resource[0]->end = 8;
- link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
-
- link->conf.Attributes = 0;
- link->conf.IntType = INT_MEMORY_AND_IO;
-
return sedlbauer_config(link);
} /* sedlbauer_attach */
-/*======================================================================
-
- This deletes a driver "instance". The device is de-registered
- with Card Services. If it has been released, all local data
- structures are freed. Otherwise, the structures will be freed
- when the device is released.
-
-======================================================================*/
-
static void __devexit sedlbauer_detach(struct pcmcia_device *link)
{
dev_dbg(&link->dev, "sedlbauer_detach(0x%p)\n", link);
@@ -158,70 +102,15 @@ static void __devexit sedlbauer_detach(struct pcmcia_device *link)
kfree(link->priv);
} /* sedlbauer_detach */
-/*======================================================================
-
- sedlbauer_config() is scheduled to run after a CARD_INSERTION event
- is received, to configure the PCMCIA socket, and to make the
- device available to the system.
-
-======================================================================*/
-static int sedlbauer_config_check(struct pcmcia_device *p_dev,
- cistpl_cftable_entry_t *cfg,
- cistpl_cftable_entry_t *dflt,
- unsigned int vcc,
- void *priv_data)
+static int sedlbauer_config_check(struct pcmcia_device *p_dev, void *priv_data)
{
- if (cfg->index == 0)
- return -ENODEV;
-
- /* Does this card need audio output? */
- if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
- p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
- p_dev->conf.Status = CCSR_AUDIO_ENA;
- }
+ if (p_dev->config_index == 0)
+ return -EINVAL;
- /* Use power settings for Vcc and Vpp if present */
- /* Note that the CIS values need to be rescaled */
- if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM)) {
- if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM]/10000)
- return -ENODEV;
- } else if (dflt->vcc.present & (1<<CISTPL_POWER_VNOM)) {
- if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM]/10000)
- return -ENODEV;
- }
-
- if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
- p_dev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
- else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM))
- p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000;
-
- p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
-
- /* IO window settings */
- p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
- if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
- cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
- p_dev->resource[0]->start = io->win[0].base;
- p_dev->resource[0]->end = io->win[0].len;
- p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
- p_dev->resource[0]->flags |=
- pcmcia_io_cfg_data_width(io->flags);
- if (io->nwin > 1) {
- p_dev->resource[1]->flags = p_dev->resource[0]->flags;
- p_dev->resource[1]->start = io->win[1].base;
- p_dev->resource[1]->end = io->win[1].len;
- }
- /* This reserves IO space but doesn't actually enable it */
- p_dev->io_lines = 3;
- if (pcmcia_request_io(p_dev) != 0)
- return -ENODEV;
- }
-
- return 0;
+ p_dev->io_lines = 3;
+ return pcmcia_request_io(p_dev);
}
-
-
static int __devinit sedlbauer_config(struct pcmcia_device *link)
{
int ret;
@@ -229,44 +118,17 @@ static int __devinit sedlbauer_config(struct pcmcia_device *link)
dev_dbg(&link->dev, "sedlbauer_config(0x%p)\n", link);
- /*
- In this loop, we scan the CIS for configuration table entries,
- each of which describes a valid card configuration, including
- voltage, IO window, memory window, and interrupt settings.
-
- We make no assumptions about the card to be configured: we use
- just the information available in the CIS. In an ideal world,
- this would work for any PCMCIA card, but it requires a complete
- and accurate CIS. In practice, a driver usually "knows" most of
- these things without consulting the CIS, and most client drivers
- will only use the CIS to fill in implementation-defined details.
- */
+ link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_CHECK_VCC |
+ CONF_AUTO_SET_VPP | CONF_AUTO_AUDIO | CONF_AUTO_SET_IO;
+
ret = pcmcia_loop_config(link, sedlbauer_config_check, NULL);
if (ret)
goto failed;
- /*
- This actually configures the PCMCIA socket -- setting up
- the I/O windows and the interrupt mapping, and putting the
- card and host interface into "Memory and IO" mode.
- */
- ret = pcmcia_request_configuration(link, &link->conf);
+ ret = pcmcia_enable_device(link);
if (ret)
goto failed;
- /* Finally, report what we've done */
- dev_info(&link->dev, "index 0x%02x:",
- link->conf.ConfigIndex);
- if (link->conf.Vpp)
- printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10);
- if (link->conf.Attributes & CONF_ENABLE_IRQ)
- printk(", irq %d", link->irq);
- if (link->resource[0])
- printk(" & %pR", link->resource[0]);
- if (link->resource[1])
- printk(" & %pR", link->resource[1]);
- printk("\n");
-
icard.para[0] = link->irq;
icard.para[1] = link->resource[0]->start;
icard.protocol = protocol;
@@ -290,14 +152,6 @@ failed:
} /* sedlbauer_config */
-/*======================================================================
-
- After a card is removed, sedlbauer_release() will unregister the
- device, and release the PCMCIA configuration. If the device is
- still open, this will be postponed until it is closed.
-
-======================================================================*/
-
static void sedlbauer_release(struct pcmcia_device *link)
{
local_info_t *local = link->priv;
@@ -346,9 +200,7 @@ MODULE_DEVICE_TABLE(pcmcia, sedlbauer_ids);
static struct pcmcia_driver sedlbauer_driver = {
.owner = THIS_MODULE,
- .drv = {
- .name = "sedlbauer_cs",
- },
+ .name = "sedlbauer_cs",
.probe = sedlbauer_probe,
.remove = __devexit_p(sedlbauer_detach),
.id_table = sedlbauer_ids,