diff options
Diffstat (limited to 'drivers/leds')
29 files changed, 960 insertions, 172 deletions
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index ec50824c02ec..ef992293598a 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -173,7 +173,7 @@ config LEDS_PCA9532_GPIO config LEDS_GPIO tristate "LED Support for GPIO connected LEDs" depends on LEDS_CLASS - depends on GENERIC_GPIO + depends on GPIOLIB help This option enables support for the LEDs connected to GPIO outputs. To be useful the particular board must have LEDs @@ -194,8 +194,8 @@ config LEDS_LP3944 module will be called leds-lp3944. config LEDS_LP55XX_COMMON - tristate "Common Driver for TI/National LP5521 and LP5523/55231" - depends on LEDS_LP5521 || LEDS_LP5523 + tristate "Common Driver for TI/National LP5521, LP5523/55231 and LP5562" + depends on LEDS_LP5521 || LEDS_LP5523 || LEDS_LP5562 select FW_LOADER help This option supports common operations for LP5521 and LP5523/55231 @@ -222,6 +222,16 @@ config LEDS_LP5523 Driver provides direct control via LED class and interface for programming the engines. +config LEDS_LP5562 + tristate "LED Support for TI LP5562 LED driver chip" + depends on LEDS_CLASS && I2C + select LEDS_LP55XX_COMMON + help + If you say yes here you get support for TI LP5562 LED driver. + It is 4 channels chip with programmable engines. + Driver provides direct control via LED class and interface for + programming the engines. + config LEDS_LP8788 tristate "LED support for the TI LP8788 PMIC" depends on LEDS_CLASS @@ -352,7 +362,7 @@ config LEDS_INTEL_SS4200 config LEDS_LT3593 tristate "LED driver for LT3593 controllers" depends on LEDS_CLASS - depends on GENERIC_GPIO + depends on GPIOLIB help This option enables support for LEDs driven by a Linear Technology LT3593 controller. This controller uses a special one-wire pulse @@ -421,7 +431,7 @@ config LEDS_ASIC3 config LEDS_RENESAS_TPU bool "LED support for Renesas TPU" - depends on LEDS_CLASS=y && HAVE_CLK && GENERIC_GPIO + depends on LEDS_CLASS=y && HAVE_CLK && GPIOLIB help This option enables build of the LED TPU platform driver, suitable to drive any TPU channel on newer Renesas SoCs. @@ -469,106 +479,7 @@ config LEDS_BLINKM This option enables support for the BlinkM RGB LED connected through I2C. Say Y to enable support for the BlinkM LED. -config LEDS_TRIGGERS - bool "LED Trigger support" - depends on LEDS_CLASS - help - This option enables trigger support for the leds class. - These triggers allow kernel events to drive the LEDs and can - be configured via sysfs. If unsure, say Y. - comment "LED Triggers" - -config LEDS_TRIGGER_TIMER - tristate "LED Timer Trigger" - depends on LEDS_TRIGGERS - help - This allows LEDs to be controlled by a programmable timer - via sysfs. Some LED hardware can be programmed to start - blinking the LED without any further software interaction. - For more details read Documentation/leds/leds-class.txt. - - If unsure, say Y. - -config LEDS_TRIGGER_ONESHOT - tristate "LED One-shot Trigger" - depends on LEDS_TRIGGERS - help - This allows LEDs to blink in one-shot pulses with parameters - controlled via sysfs. It's useful to notify the user on - sporadic events, when there are no clear begin and end trap points, - or on dense events, where this blinks the LED at constant rate if - rearmed continuously. - - It also shows how to use the led_blink_set_oneshot() function. - - If unsure, say Y. - -config LEDS_TRIGGER_IDE_DISK - bool "LED IDE Disk Trigger" - depends on IDE_GD_ATA - depends on LEDS_TRIGGERS - help - This allows LEDs to be controlled by IDE disk activity. - If unsure, say Y. - -config LEDS_TRIGGER_HEARTBEAT - tristate "LED Heartbeat Trigger" - depends on LEDS_TRIGGERS - help - This allows LEDs to be controlled by a CPU load average. - The flash frequency is a hyperbolic function of the 1-minute - load average. - If unsure, say Y. - -config LEDS_TRIGGER_BACKLIGHT - tristate "LED backlight Trigger" - depends on LEDS_TRIGGERS - help - This allows LEDs to be controlled as a backlight device: they - turn off and on when the display is blanked and unblanked. - - If unsure, say N. - -config LEDS_TRIGGER_CPU - bool "LED CPU Trigger" - depends on LEDS_TRIGGERS - help - This allows LEDs to be controlled by active CPUs. This shows - the active CPUs across an array of LEDs so you can see which - CPUs are active on the system at any given moment. - - If unsure, say N. - -config LEDS_TRIGGER_GPIO - tristate "LED GPIO Trigger" - depends on LEDS_TRIGGERS - depends on GPIOLIB - help - This allows LEDs to be controlled by gpio events. It's good - when using gpios as switches and triggering the needed LEDs - from there. One use case is n810's keypad LEDs that could - be triggered by this trigger when user slides up to show - keypad. - - If unsure, say N. - -config LEDS_TRIGGER_DEFAULT_ON - tristate "LED Default ON Trigger" - depends on LEDS_TRIGGERS - help - This allows LEDs to be initialised in the ON state. - If unsure, say Y. - -comment "iptables trigger is under Netfilter config (LED target)" - depends on LEDS_TRIGGERS - -config LEDS_TRIGGER_TRANSIENT - tristate "LED Transient Trigger" - depends on LEDS_TRIGGERS - help - This allows one time activation of a transient state on - GPIO/PWM based hardware. - If unsure, say Y. +source "drivers/leds/trigger/Kconfig" endif # NEW_LEDS diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile index 215e7e3b6173..ac2897732b02 100644 --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile @@ -26,6 +26,7 @@ obj-$(CONFIG_LEDS_LP3944) += leds-lp3944.o obj-$(CONFIG_LEDS_LP55XX_COMMON) += leds-lp55xx-common.o obj-$(CONFIG_LEDS_LP5521) += leds-lp5521.o obj-$(CONFIG_LEDS_LP5523) += leds-lp5523.o +obj-$(CONFIG_LEDS_LP5562) += leds-lp5562.o obj-$(CONFIG_LEDS_LP8788) += leds-lp8788.o obj-$(CONFIG_LEDS_TCA6507) += leds-tca6507.o obj-$(CONFIG_LEDS_CLEVO_MAIL) += leds-clevo-mail.o @@ -57,12 +58,4 @@ obj-$(CONFIG_LEDS_BLINKM) += leds-blinkm.o obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o # LED Triggers -obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o -obj-$(CONFIG_LEDS_TRIGGER_ONESHOT) += ledtrig-oneshot.o -obj-$(CONFIG_LEDS_TRIGGER_IDE_DISK) += ledtrig-ide-disk.o -obj-$(CONFIG_LEDS_TRIGGER_HEARTBEAT) += ledtrig-heartbeat.o -obj-$(CONFIG_LEDS_TRIGGER_BACKLIGHT) += ledtrig-backlight.o -obj-$(CONFIG_LEDS_TRIGGER_GPIO) += ledtrig-gpio.o -obj-$(CONFIG_LEDS_TRIGGER_CPU) += ledtrig-cpu.o -obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o -obj-$(CONFIG_LEDS_TRIGGER_TRANSIENT) += ledtrig-transient.o +obj-$(CONFIG_LEDS_TRIGGERS) += trigger/ diff --git a/drivers/leds/leds-asic3.c b/drivers/leds/leds-asic3.c index b474745e001b..cf9efe421c2b 100644 --- a/drivers/leds/leds-asic3.c +++ b/drivers/leds/leds-asic3.c @@ -134,6 +134,7 @@ static int asic3_led_remove(struct platform_device *pdev) return mfd_cell_disable(pdev); } +#ifdef CONFIG_PM_SLEEP static int asic3_led_suspend(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); @@ -159,11 +160,9 @@ static int asic3_led_resume(struct device *dev) return ret; } +#endif -static const struct dev_pm_ops asic3_led_pm_ops = { - .suspend = asic3_led_suspend, - .resume = asic3_led_resume, -}; +static SIMPLE_DEV_PM_OPS(asic3_led_pm_ops, asic3_led_suspend, asic3_led_resume); static struct platform_driver asic3_led_driver = { .probe = asic3_led_probe, diff --git a/drivers/leds/leds-atmel-pwm.c b/drivers/leds/leds-atmel-pwm.c index 386773532d95..8a39c5b20f76 100644 --- a/drivers/leds/leds-atmel-pwm.c +++ b/drivers/leds/leds-atmel-pwm.c @@ -113,7 +113,7 @@ err: return status; } -static int __exit pwmled_remove(struct platform_device *pdev) +static int pwmled_remove(struct platform_device *pdev) { const struct gpio_led_platform_data *pdata; struct pwmled *leds; @@ -140,7 +140,7 @@ static struct platform_driver pwmled_driver = { }, /* REVISIT add suspend() and resume() methods */ .probe = pwmled_probe, - .remove = __exit_p(pwmled_remove), + .remove = pwmled_remove, }; module_platform_driver(pwmled_driver); diff --git a/drivers/leds/leds-bd2802.c b/drivers/leds/leds-bd2802.c index 851517030cc1..2db04231a792 100644 --- a/drivers/leds/leds-bd2802.c +++ b/drivers/leds/leds-bd2802.c @@ -732,7 +732,7 @@ failed_unregister_dev_file: return ret; } -static int __exit bd2802_remove(struct i2c_client *client) +static int bd2802_remove(struct i2c_client *client) { struct bd2802_led *led = i2c_get_clientdata(client); int i; @@ -747,8 +747,7 @@ static int __exit bd2802_remove(struct i2c_client *client) return 0; } -#ifdef CONFIG_PM - +#ifdef CONFIG_PM_SLEEP static void bd2802_restore_state(struct bd2802_led *led) { int i; @@ -785,12 +784,9 @@ static int bd2802_resume(struct device *dev) return 0; } +#endif static SIMPLE_DEV_PM_OPS(bd2802_pm, bd2802_suspend, bd2802_resume); -#define BD2802_PM (&bd2802_pm) -#else /* CONFIG_PM */ -#define BD2802_PM NULL -#endif static const struct i2c_device_id bd2802_id[] = { { "BD2802", 0 }, @@ -801,10 +797,10 @@ MODULE_DEVICE_TABLE(i2c, bd2802_id); static struct i2c_driver bd2802_i2c_driver = { .driver = { .name = "BD2802", - .pm = BD2802_PM, + .pm = &bd2802_pm, }, .probe = bd2802_probe, - .remove = __exit_p(bd2802_remove), + .remove = bd2802_remove, .id_table = bd2802_id, }; diff --git a/drivers/leds/leds-lm355x.c b/drivers/leds/leds-lm355x.c index 4117235ba618..d81a8e7afd6c 100644 --- a/drivers/leds/leds-lm355x.c +++ b/drivers/leds/leds-lm355x.c @@ -477,6 +477,7 @@ static int lm355x_probe(struct i2c_client *client, chip->cdev_flash.name = "flash"; chip->cdev_flash.max_brightness = 16; chip->cdev_flash.brightness_set = lm355x_strobe_brightness_set; + chip->cdev_flash.default_trigger = "flash"; err = led_classdev_register((struct device *) &client->dev, &chip->cdev_flash); if (err < 0) @@ -486,6 +487,7 @@ static int lm355x_probe(struct i2c_client *client, chip->cdev_torch.name = "torch"; chip->cdev_torch.max_brightness = 8; chip->cdev_torch.brightness_set = lm355x_torch_brightness_set; + chip->cdev_torch.default_trigger = "torch"; err = led_classdev_register((struct device *) &client->dev, &chip->cdev_torch); if (err < 0) diff --git a/drivers/leds/leds-lm3642.c b/drivers/leds/leds-lm3642.c index 9f428d9dfe91..f361bbef2dec 100644 --- a/drivers/leds/leds-lm3642.c +++ b/drivers/leds/leds-lm3642.c @@ -363,6 +363,7 @@ static int lm3642_probe(struct i2c_client *client, chip->cdev_flash.name = "flash"; chip->cdev_flash.max_brightness = 16; chip->cdev_flash.brightness_set = lm3642_strobe_brightness_set; + chip->cdev_flash.default_trigger = "flash"; err = led_classdev_register((struct device *) &client->dev, &chip->cdev_flash); if (err < 0) { @@ -380,6 +381,7 @@ static int lm3642_probe(struct i2c_client *client, chip->cdev_torch.name = "torch"; chip->cdev_torch.max_brightness = 8; chip->cdev_torch.brightness_set = lm3642_torch_brightness_set; + chip->cdev_torch.default_trigger = "torch"; err = led_classdev_register((struct device *) &client->dev, &chip->cdev_torch); if (err < 0) { diff --git a/drivers/leds/leds-lp5521.c b/drivers/leds/leds-lp5521.c index 1001347ba70b..19752c928aa2 100644 --- a/drivers/leds/leds-lp5521.c +++ b/drivers/leds/leds-lp5521.c @@ -68,6 +68,18 @@ #define LP5521_ENABLE_RUN_PROGRAM \ (LP5521_ENABLE_DEFAULT | LP5521_EXEC_RUN) +/* CONFIG register */ +#define LP5521_PWM_HF 0x40 /* PWM: 0 = 256Hz, 1 = 558Hz */ +#define LP5521_PWRSAVE_EN 0x20 /* 1 = Power save mode */ +#define LP5521_CP_MODE_OFF 0 /* Charge pump (CP) off */ +#define LP5521_CP_MODE_BYPASS 8 /* CP forced to bypass mode */ +#define LP5521_CP_MODE_1X5 0x10 /* CP forced to 1.5x mode */ +#define LP5521_CP_MODE_AUTO 0x18 /* Automatic mode selection */ +#define LP5521_R_TO_BATT 0x04 /* R out: 0 = CP, 1 = Vbat */ +#define LP5521_CLK_INT 0x01 /* Internal clock */ +#define LP5521_DEFAULT_CFG \ + (LP5521_PWM_HF | LP5521_PWRSAVE_EN | LP5521_CP_MODE_AUTO) + /* Status */ #define LP5521_EXT_CLK_USED 0x08 @@ -296,8 +308,11 @@ static int lp5521_post_init_device(struct lp55xx_chip *chip) /* Set all PWMs to direct control mode */ ret = lp55xx_write(chip, LP5521_REG_OP_MODE, LP5521_CMD_DIRECT); - val = chip->pdata->update_config ? - : (LP5521_PWRSAVE_EN | LP5521_CP_MODE_AUTO | LP5521_R_TO_BATT); + /* Update configuration for the clock setting */ + val = LP5521_DEFAULT_CFG; + if (!lp55xx_is_extclk_used(chip)) + val |= LP5521_CLK_INT; + ret = lp55xx_write(chip, LP5521_REG_CONFIG, val); if (ret) return ret; @@ -360,7 +375,8 @@ static ssize_t lp5521_selftest(struct device *dev, mutex_lock(&chip->lock); ret = lp5521_run_selftest(chip, buf); mutex_unlock(&chip->lock); - return sprintf(buf, "%s\n", ret ? "FAIL" : "OK"); + + return scnprintf(buf, PAGE_SIZE, "%s\n", ret ? "FAIL" : "OK"); } /* device attributes */ diff --git a/drivers/leds/leds-lp5562.c b/drivers/leds/leds-lp5562.c new file mode 100644 index 000000000000..513f2390ca2d --- /dev/null +++ b/drivers/leds/leds-lp5562.c @@ -0,0 +1,599 @@ +/* + * LP5562 LED driver + * + * Copyright (C) 2013 Texas Instruments + * + * Author: Milo(Woogyom) Kim <milo.kim@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/delay.h> +#include <linux/firmware.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/leds.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/platform_data/leds-lp55xx.h> +#include <linux/slab.h> + +#include "leds-lp55xx-common.h" + +#define LP5562_PROGRAM_LENGTH 32 +#define LP5562_MAX_LEDS 4 + +/* ENABLE Register 00h */ +#define LP5562_REG_ENABLE 0x00 +#define LP5562_EXEC_ENG1_M 0x30 +#define LP5562_EXEC_ENG2_M 0x0C +#define LP5562_EXEC_ENG3_M 0x03 +#define LP5562_EXEC_M 0x3F +#define LP5562_MASTER_ENABLE 0x40 /* Chip master enable */ +#define LP5562_LOGARITHMIC_PWM 0x80 /* Logarithmic PWM adjustment */ +#define LP5562_EXEC_RUN 0x2A +#define LP5562_ENABLE_DEFAULT \ + (LP5562_MASTER_ENABLE | LP5562_LOGARITHMIC_PWM) +#define LP5562_ENABLE_RUN_PROGRAM \ + (LP5562_ENABLE_DEFAULT | LP5562_EXEC_RUN) + +/* OPMODE Register 01h */ +#define LP5562_REG_OP_MODE 0x01 +#define LP5562_MODE_ENG1_M 0x30 +#define LP5562_MODE_ENG2_M 0x0C +#define LP5562_MODE_ENG3_M 0x03 +#define LP5562_LOAD_ENG1 0x10 +#define LP5562_LOAD_ENG2 0x04 +#define LP5562_LOAD_ENG3 0x01 +#define LP5562_RUN_ENG1 0x20 +#define LP5562_RUN_ENG2 0x08 +#define LP5562_RUN_ENG3 0x02 +#define LP5562_ENG1_IS_LOADING(mode) \ + ((mode & LP5562_MODE_ENG1_M) == LP5562_LOAD_ENG1) +#define LP5562_ENG2_IS_LOADING(mode) \ + ((mode & LP5562_MODE_ENG2_M) == LP5562_LOAD_ENG2) +#define LP5562_ENG3_IS_LOADING(mode) \ + ((mode & LP5562_MODE_ENG3_M) == LP5562_LOAD_ENG3) + +/* BRIGHTNESS Registers */ +#define LP5562_REG_R_PWM 0x04 +#define LP5562_REG_G_PWM 0x03 +#define LP5562_REG_B_PWM 0x02 +#define LP5562_REG_W_PWM 0x0E + +/* CURRENT Registers */ +#define LP5562_REG_R_CURRENT 0x07 +#define LP5562_REG_G_CURRENT 0x06 +#define LP5562_REG_B_CURRENT 0x05 +#define LP5562_REG_W_CURRENT 0x0F + +/* CONFIG Register 08h */ +#define LP5562_REG_CONFIG 0x08 +#define LP5562_PWM_HF 0x40 +#define LP5562_PWRSAVE_EN 0x20 +#define LP5562_CLK_INT 0x01 /* Internal clock */ +#define LP5562_DEFAULT_CFG (LP5562_PWM_HF | LP5562_PWRSAVE_EN) + +/* RESET Register 0Dh */ +#define LP5562_REG_RESET 0x0D +#define LP5562_RESET 0xFF + +/* PROGRAM ENGINE Registers */ +#define LP5562_REG_PROG_MEM_ENG1 0x10 +#define LP5562_REG_PROG_MEM_ENG2 0x30 +#define LP5562_REG_PROG_MEM_ENG3 0x50 + +/* LEDMAP Register 70h */ +#define LP5562_REG_ENG_SEL 0x70 +#define LP5562_ENG_SEL_PWM 0 +#define LP5562_ENG_FOR_RGB_M 0x3F +#define LP5562_ENG_SEL_RGB 0x1B /* R:ENG1, G:ENG2, B:ENG3 */ +#define LP5562_ENG_FOR_W_M 0xC0 +#define LP5562_ENG1_FOR_W 0x40 /* W:ENG1 */ +#define LP5562_ENG2_FOR_W 0x80 /* W:ENG2 */ +#define LP5562_ENG3_FOR_W 0xC0 /* W:ENG3 */ + +/* Program Commands */ +#define LP5562_CMD_DISABLE 0x00 +#define LP5562_CMD_LOAD 0x15 +#define LP5562_CMD_RUN 0x2A +#define LP5562_CMD_DIRECT 0x3F +#define LP5562_PATTERN_OFF 0 + +static inline void lp5562_wait_opmode_done(void) +{ + /* operation mode change needs to be longer than 153 us */ + usleep_range(200, 300); +} + +static inline void lp5562_wait_enable_done(void) +{ + /* it takes more 488 us to update ENABLE register */ + usleep_range(500, 600); +} + +static void lp5562_set_led_current(struct lp55xx_led *led, u8 led_current) +{ + u8 addr[] = { + LP5562_REG_R_CURRENT, + LP5562_REG_G_CURRENT, + LP5562_REG_B_CURRENT, + LP5562_REG_W_CURRENT, + }; + + led->led_current = led_current; + lp55xx_write(led->chip, addr[led->chan_nr], led_current); +} + +static void lp5562_load_engine(struct lp55xx_chip *chip) +{ + enum lp55xx_engine_index idx = chip->engine_idx; + u8 mask[] = { + [LP55XX_ENGINE_1] = LP5562_MODE_ENG1_M, + [LP55XX_ENGINE_2] = LP5562_MODE_ENG2_M, + [LP55XX_ENGINE_3] = LP5562_MODE_ENG3_M, + }; + + u8 val[] = { + [LP55XX_ENGINE_1] = LP5562_LOAD_ENG1, + [LP55XX_ENGINE_2] = LP5562_LOAD_ENG2, + [LP55XX_ENGINE_3] = LP5562_LOAD_ENG3, + }; + + lp55xx_update_bits(chip, LP5562_REG_OP_MODE, mask[idx], val[idx]); + + lp5562_wait_opmode_done(); +} + +static void lp5562_stop_engine(struct lp55xx_chip *chip) +{ + lp55xx_write(chip, LP5562_REG_OP_MODE, LP5562_CMD_DISABLE); + lp5562_wait_opmode_done(); +} + +static void lp5562_run_engine(struct lp55xx_chip *chip, bool start) +{ + int ret; + u8 mode; + u8 exec; + + /* stop engine */ + if (!start) { + lp55xx_write(chip, LP5562_REG_ENABLE, LP5562_ENABLE_DEFAULT); + lp5562_wait_enable_done(); + lp5562_stop_engine(chip); + lp55xx_write(chip, LP5562_REG_ENG_SEL, LP5562_ENG_SEL_PWM); + lp55xx_write(chip, LP5562_REG_OP_MODE, LP5562_CMD_DIRECT); + lp5562_wait_opmode_done(); + return; + } + + /* + * To run the engine, + * operation mode and enable register should updated at the same time + */ + + ret = lp55xx_read(chip, LP5562_REG_OP_MODE, &mode); + if (ret) + return; + + ret = lp55xx_read(chip, LP5562_REG_ENABLE, &exec); + if (ret) + return; + + /* change operation mode to RUN only when each engine is loading */ + if (LP5562_ENG1_IS_LOADING(mode)) { + mode = (mode & ~LP5562_MODE_ENG1_M) | LP5562_RUN_ENG1; + exec = (exec & ~LP5562_EXEC_ENG1_M) | LP5562_RUN_ENG1; + } + + if (LP5562_ENG2_IS_LOADING(mode)) { + mode = (mode & ~LP5562_MODE_ENG2_M) | LP5562_RUN_ENG2; + exec = (exec & ~LP5562_EXEC_ENG2_M) | LP5562_RUN_ENG2; + } + + if (LP5562_ENG3_IS_LOADING(mode)) { + mode = (mode & ~LP5562_MODE_ENG3_M) | LP5562_RUN_ENG3; + exec = (exec & ~LP5562_EXEC_ENG3_M) | LP5562_RUN_ENG3; + } + + lp55xx_write(chip, LP5562_REG_OP_MODE, mode); + lp5562_wait_opmode_done(); + + lp55xx_update_bits(chip, LP5562_REG_ENABLE, LP5562_EXEC_M, exec); + lp5562_wait_enable_done(); +} + +static int lp5562_update_firmware(struct lp55xx_chip *chip, + const u8 *data, size_t size) +{ + enum lp55xx_engine_index idx = chip->engine_idx; + u8 pattern[LP5562_PROGRAM_LENGTH] = {0}; + u8 addr[] = { + [LP55XX_ENGINE_1] = LP5562_REG_PROG_MEM_ENG1, + [LP55XX_ENGINE_2] = LP5562_REG_PROG_MEM_ENG2, + [LP55XX_ENGINE_3] = LP5562_REG_PROG_MEM_ENG3, + }; + unsigned cmd; + char c[3]; + int program_size; + int nrchars; + int offset = 0; + int ret; + int i; + + /* clear program memory before updating */ + for (i = 0; i < LP5562_PROGRAM_LENGTH; i++) + lp55xx_write(chip, addr[idx] + i, 0); + + i = 0; + while ((offset < size - 1) && (i < LP5562_PROGRAM_LENGTH)) { + /* separate sscanfs because length is working only for %s */ + ret = sscanf(data + offset, "%2s%n ", c, &nrchars); + if (ret != 1) + goto err; + + ret = sscanf(c, "%2x", &cmd); + if (ret != 1) + goto err; + + pattern[i] = (u8)cmd; + offset += nrchars; + i++; + } + + /* Each instruction is 16bit long. Check that length is even */ + if (i % 2) + goto err; + + program_size = i; + for (i = 0; i < program_size; i++) + lp55xx_write(chip, addr[idx] + i, pattern[i]); + + return 0; + +err: + dev_err(&chip->cl->dev, "wrong pattern format\n"); + return -EINVAL; +} + +static void lp5562_firmware_loaded(struct lp55xx_chip *chip) +{ + const struct firmware *fw = chip->fw; + + if (fw->size > LP5562_PROGRAM_LENGTH) { + dev_err(&chip->cl->dev, "firmware data size overflow: %zu\n", + fw->size); + return; + } + + /* + * Program momery sequence + * 1) set engine mode to "LOAD" + * 2) write firmware data into program memory + */ + + lp5562_load_engine(chip); + lp5562_update_firmware(chip, fw->data, fw->size); +} + +static int lp5562_post_init_device(struct lp55xx_chip *chip) +{ + int ret; + u8 cfg = LP5562_DEFAULT_CFG; + + /* Set all PWMs to direct control mode */ + ret = lp55xx_write(chip, LP5562_REG_OP_MODE, LP5562_CMD_DIRECT); + if (ret) + return ret; + + lp5562_wait_opmode_done(); + + /* Update configuration for the clock setting */ + if (!lp55xx_is_extclk_used(chip)) + cfg |= LP5562_CLK_INT; + + ret = lp55xx_write(chip, LP5562_REG_CONFIG, cfg); + if (ret) + return ret; + + /* Initialize all channels PWM to zero -> leds off */ + lp55xx_write(chip, LP5562_REG_R_PWM, 0); + lp55xx_write(chip, LP5562_REG_G_PWM, 0); + lp55xx_write(chip, LP5562_REG_B_PWM, 0); + lp55xx_write(chip, LP5562_REG_W_PWM, 0); + + /* Set LED map as register PWM by default */ + lp55xx_write(chip, LP5562_REG_ENG_SEL, LP5562_ENG_SEL_PWM); + + return 0; +} + +static void lp5562_led_brightness_work(struct work_struct *work) +{ + struct lp55xx_led *led = container_of(work, struct lp55xx_led, + brightness_work); + struct lp55xx_chip *chip = led->chip; + u8 addr[] = { + LP5562_REG_R_PWM, + LP5562_REG_G_PWM, + LP5562_REG_B_PWM, + LP5562_REG_W_PWM, + }; + + mutex_lock(&chip->lock); + lp55xx_write(chip, addr[led->chan_nr], led->brightness); + mutex_unlock(&chip->lock); +} + +static void lp5562_write_program_memory(struct lp55xx_chip *chip, + u8 base, const u8 *rgb, int size) +{ + int i; + + if (!rgb || size <= 0) + return; + + for (i = 0; i < size; i++) + lp55xx_write(chip, base + i, *(rgb + i)); + + lp55xx_write(chip, base + i, 0); + lp55xx_write(chip, base + i + 1, 0); +} + +/* check the size of program count */ +static inline bool _is_pc_overflow(struct lp55xx_predef_pattern *ptn) +{ + return (ptn->size_r >= LP5562_PROGRAM_LENGTH || + ptn->size_g >= LP5562_PROGRAM_LENGTH || + ptn->size_b >= LP5562_PROGRAM_LENGTH); +} + +static int lp5562_run_predef_led_pattern(struct lp55xx_chip *chip, int mode) +{ + struct lp55xx_predef_pattern *ptn; + int i; + + if (mode == LP5562_PATTERN_OFF) { + lp5562_run_engine(chip, false); + return 0; + } + + ptn = chip->pdata->patterns + (mode - 1); + if (!ptn || _is_pc_overflow(ptn)) { + dev_err(&chip->cl->dev, "invalid pattern data\n"); + return -EINVAL; + } + + lp5562_stop_engine(chip); + + /* Set LED map as RGB */ + lp55xx_write(chip, LP5562_REG_ENG_SEL, LP5562_ENG_SEL_RGB); + + /* Load engines */ + for (i = LP55XX_ENGINE_1; i <= LP55XX_ENGINE_3; i++) { + chip->engine_idx = i; + lp5562_load_engine(chip); + } + + /* Clear program registers */ + lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG1, 0); + lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG1 + 1, 0); + lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG2, 0); + lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG2 + 1, 0); + lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG3, 0); + lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG3 + 1, 0); + + /* Program engines */ + lp5562_write_program_memory(chip, LP5562_REG_PROG_MEM_ENG1, + ptn->r, ptn->size_r); + lp5562_write_program_memory(chip, LP5562_REG_PROG_MEM_ENG2, + ptn->g, ptn->size_g); + lp5562_write_program_memory(chip, LP5562_REG_PROG_MEM_ENG3, + ptn->b, ptn->size_b); + + /* Run engines */ + lp5562_run_engine(chip, true); + + return 0; +} + +static ssize_t lp5562_store_pattern(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev)); + struct lp55xx_chip *chip = led->chip; + struct lp55xx_predef_pattern *ptn = chip->pdata->patterns; + int num_patterns = chip->pdata->num_patterns; + unsigned long mode; + int ret; + + ret = kstrtoul(buf, 0, &mode); + if (ret) + return ret; + + if (mode > num_patterns || !ptn) + return -EINVAL; + + mutex_lock(&chip->lock); + ret = lp5562_run_predef_led_pattern(chip, mode); + mutex_unlock(&chip->lock); + + if (ret) + return ret; + + return len; +} + +static ssize_t lp5562_store_engine_mux(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev)); + struct lp55xx_chip *chip = led->chip; + u8 mask; + u8 val; + + /* LED map + * R ... Engine 1 (fixed) + * G ... Engine 2 (fixed) + * B ... Engine 3 (fixed) + * W ... Engine 1 or 2 or 3 + */ + + if (sysfs_streq(buf, "RGB")) { + mask = LP5562_ENG_FOR_RGB_M; + val = LP5562_ENG_SEL_RGB; + } else if (sysfs_streq(buf, "W")) { + enum lp55xx_engine_index idx = chip->engine_idx; + + mask = LP5562_ENG_FOR_W_M; + switch (idx) { + case LP55XX_ENGINE_1: + val = LP5562_ENG1_FOR_W; + break; + case LP55XX_ENGINE_2: + val = LP5562_ENG2_FOR_W; + break; + case LP55XX_ENGINE_3: + val = LP5562_ENG3_FOR_W; + break; + default: + return -EINVAL; + } + + } else { + dev_err(dev, "choose RGB or W\n"); + return -EINVAL; + } + + mutex_lock(&chip->lock); + lp55xx_update_bits(chip, LP5562_REG_ENG_SEL, mask, val); + mutex_unlock(&chip->lock); + + return len; +} + +static DEVICE_ATTR(led_pattern, S_IWUSR, NULL, lp5562_store_pattern); +static DEVICE_ATTR(engine_mux, S_IWUSR, NULL, lp5562_store_engine_mux); + +static struct attribute *lp5562_attributes[] = { + &dev_attr_led_pattern.attr, + &dev_attr_engine_mux.attr, + NULL, +}; + +static const struct attribute_group lp5562_group = { + .attrs = lp5562_attributes, +}; + +/* Chip specific configurations */ +static struct lp55xx_device_config lp5562_cfg = { + .max_channel = LP5562_MAX_LEDS, + .reset = { + .addr = LP5562_REG_RESET, + .val = LP5562_RESET, + }, + .enable = { + .addr = LP5562_REG_ENABLE, + .val = LP5562_ENABLE_DEFAULT, + }, + .post_init_device = lp5562_post_init_device, + .set_led_current = lp5562_set_led_current, + .brightness_work_fn = lp5562_led_brightness_work, + .run_engine = lp5562_run_engine, + .firmware_cb = lp5562_firmware_loaded, + .dev_attr_group = &lp5562_group, +}; + +static int lp5562_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + int ret; + struct lp55xx_chip *chip; + struct lp55xx_led *led; + struct lp55xx_platform_data *pdata = client->dev.platform_data; + + if (!pdata) { + dev_err(&client->dev, "no platform data\n"); + return -EINVAL; + } + + chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + led = devm_kzalloc(&client->dev, + sizeof(*led) * pdata->num_channels, GFP_KERNEL); + if (!led) + return -ENOMEM; + + chip->cl = client; + chip->pdata = pdata; + chip->cfg = &lp5562_cfg; + + mutex_init(&chip->lock); + + i2c_set_clientdata(client, led); + + ret = lp55xx_init_device(chip); + if (ret) + goto err_init; + + ret = lp55xx_register_leds(led, chip); + if (ret) + goto err_register_leds; + + ret = lp55xx_register_sysfs(chip); + if (ret) { + dev_err(&client->dev, "registering sysfs failed\n"); + goto err_register_sysfs; + } + + return 0; + +err_register_sysfs: + lp55xx_unregister_leds(led, chip); +err_register_leds: + lp55xx_deinit_device(chip); +err_init: + return ret; +} + +static int lp5562_remove(struct i2c_client *client) +{ + struct lp55xx_led *led = i2c_get_clientdata(client); + struct lp55xx_chip *chip = led->chip; + + lp5562_stop_engine(chip); + + lp55xx_unregister_sysfs(chip); + lp55xx_unregister_leds(led, chip); + lp55xx_deinit_device(chip); + + return 0; +} + +static const struct i2c_device_id lp5562_id[] = { + { "lp5562", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, lp5562_id); + +static struct i2c_driver lp5562_driver = { + .driver = { + .name = "lp5562", + }, + .probe = lp5562_probe, + .remove = lp5562_remove, + .id_table = lp5562_id, +}; + +module_i2c_driver(lp5562_driver); + +MODULE_DESCRIPTION("Texas Instruments LP5562 LED Driver"); +MODULE_AUTHOR("Milo Kim"); +MODULE_LICENSE("GPL"); diff --git a/drivers/leds/leds-lp55xx-common.c b/drivers/leds/leds-lp55xx-common.c index d9eb84157423..ba34199dc3d9 100644 --- a/drivers/leds/leds-lp55xx-common.c +++ b/drivers/leds/leds-lp55xx-common.c @@ -1,5 +1,5 @@ /* - * LP5521/LP5523/LP55231 Common Driver + * LP5521/LP5523/LP55231/LP5562 Common Driver * * Copyright 2012 Texas Instruments * @@ -12,6 +12,7 @@ * Derived from leds-lp5521.c, leds-lp5523.c */ +#include <linux/clk.h> #include <linux/delay.h> #include <linux/firmware.h> #include <linux/i2c.h> @@ -21,6 +22,9 @@ #include "leds-lp55xx-common.h" +/* External clock rate */ +#define LP55XX_CLK_32K 32768 + static struct lp55xx_led *cdev_to_lp55xx_led(struct led_classdev *cdev) { return container_of(cdev, struct lp55xx_led, cdev); @@ -80,7 +84,7 @@ static ssize_t lp55xx_show_current(struct device *dev, { struct lp55xx_led *led = dev_to_lp55xx_led(dev); - return sprintf(buf, "%d\n", led->led_current); + return scnprintf(buf, PAGE_SIZE, "%d\n", led->led_current); } static ssize_t lp55xx_store_current(struct device *dev, @@ -113,7 +117,7 @@ static ssize_t lp55xx_show_max_current(struct device *dev, { struct lp55xx_led *led = dev_to_lp55xx_led(dev); - return sprintf(buf, "%d\n", led->max_current); + return scnprintf(buf, PAGE_SIZE, "%d\n", led->max_current); } static DEVICE_ATTR(led_current, S_IRUGO | S_IWUSR, lp55xx_show_current, @@ -357,6 +361,35 @@ int lp55xx_update_bits(struct lp55xx_chip *chip, u8 reg, u8 mask, u8 val) } EXPORT_SYMBOL_GPL(lp55xx_update_bits); +bool lp55xx_is_extclk_used(struct lp55xx_chip *chip) +{ + struct clk *clk; + int err; + + clk = devm_clk_get(&chip->cl->dev, "32k_clk"); + if (IS_ERR(clk)) + goto use_internal_clk; + + err = clk_prepare_enable(clk); + if (err) + goto use_internal_clk; + + if (clk_get_rate(clk) != LP55XX_CLK_32K) { + clk_disable_unprepare(clk); + goto use_internal_clk; + } + + dev_info(&chip->cl->dev, "%dHz external clock used\n", LP55XX_CLK_32K); + + chip->clk = clk; + return true; + +use_internal_clk: + dev_info(&chip->cl->dev, "internal clock used\n"); + return false; +} +EXPORT_SYMBOL_GPL(lp55xx_is_extclk_used); + int lp55xx_init_device(struct lp55xx_chip *chip) { struct lp55xx_platform_data *pdata; @@ -421,6 +454,9 @@ void lp55xx_deinit_device(struct lp55xx_chip *chip) { struct lp55xx_platform_data *pdata = chip->pdata; + if (chip->clk) + clk_disable_unprepare(chip->clk); + if (pdata->enable) pdata->enable(0); diff --git a/drivers/leds/leds-lp55xx-common.h b/drivers/leds/leds-lp55xx-common.h index ece4761a1302..fa6a078bf547 100644 --- a/drivers/leds/leds-lp55xx-common.h +++ b/drivers/leds/leds-lp55xx-common.h @@ -83,6 +83,7 @@ struct lp55xx_device_config { */ struct lp55xx_chip { struct i2c_client *cl; + struct clk *clk; struct lp55xx_platform_data *pdata; struct mutex lock; /* lock for user-space interface */ int num_leds; @@ -117,6 +118,9 @@ extern int lp55xx_read(struct lp55xx_chip *chip, u8 reg, u8 *val); extern int lp55xx_update_bits(struct lp55xx_chip *chip, u8 reg, u8 mask, u8 val); +/* external clock detection */ +extern bool lp55xx_is_extclk_used(struct lp55xx_chip *chip); + /* common device init/deinit functions */ extern int lp55xx_init_device(struct lp55xx_chip *chip); extern void lp55xx_deinit_device(struct lp55xx_chip *chip); diff --git a/drivers/leds/leds-lt3593.c b/drivers/leds/leds-lt3593.c index c9b9e1fec587..ca48a7d5502d 100644 --- a/drivers/leds/leds-lt3593.c +++ b/drivers/leds/leds-lt3593.c @@ -106,8 +106,9 @@ static int create_lt3593_led(const struct gpio_led *template, if (!template->retain_state_suspended) led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME; - ret = devm_gpio_request_one(parent, template->gpio, - GPIOF_DIR_OUT | state, template->name); + ret = devm_gpio_request_one(parent, template->gpio, state ? + GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW, + template->name); if (ret < 0) return ret; diff --git a/drivers/leds/leds-ns2.c b/drivers/leds/leds-ns2.c index d978171c25b4..70137b1eecf5 100644 --- a/drivers/leds/leds-ns2.c +++ b/drivers/leds/leds-ns2.c @@ -193,7 +193,8 @@ create_ns2_led(struct platform_device *pdev, struct ns2_led_data *led_dat, enum ns2_led_modes mode; ret = devm_gpio_request_one(&pdev->dev, template->cmd, - GPIOF_DIR_OUT | gpio_get_value(template->cmd), + gpio_get_value(template->cmd) ? + GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW, template->name); if (ret) { dev_err(&pdev->dev, "%s: failed to setup command GPIO\n", @@ -202,7 +203,8 @@ create_ns2_led(struct platform_device *pdev, struct ns2_led_data *led_dat, } ret = devm_gpio_request_one(&pdev->dev, template->slow, - GPIOF_DIR_OUT | gpio_get_value(template->slow), + gpio_get_value(template->slow) ? + GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW, template->name); if (ret) { dev_err(&pdev->dev, "%s: failed to setup slow GPIO\n", @@ -306,10 +308,21 @@ static const struct of_device_id of_ns2_leds_match[] = { }; #endif /* CONFIG_OF_GPIO */ +struct ns2_led_priv { + int num_leds; + struct ns2_led_data leds_data[]; +}; + +static inline int sizeof_ns2_led_priv(int num_leds) +{ + return sizeof(struct ns2_led_priv) + + (sizeof(struct ns2_led_data) * num_leds); +} + static int ns2_led_probe(struct platform_device *pdev) { struct ns2_led_platform_data *pdata = pdev->dev.platform_data; - struct ns2_led_data *leds_data; + struct ns2_led_priv *priv; int i; int ret; @@ -330,21 +343,23 @@ static int ns2_led_probe(struct platform_device *pdev) return -EINVAL; #endif /* CONFIG_OF_GPIO */ - leds_data = devm_kzalloc(&pdev->dev, sizeof(struct ns2_led_data) * - pdata->num_leds, GFP_KERNEL); - if (!leds_data) + priv = devm_kzalloc(&pdev->dev, + sizeof_ns2_led_priv(pdata->num_leds), GFP_KERNEL); + if (!priv) return -ENOMEM; + priv->num_leds = pdata->num_leds; - for (i = 0; i < pdata->num_leds; i++) { - ret = create_ns2_led(pdev, &leds_data[i], &pdata->leds[i]); + for (i = 0; i < priv->num_leds; i++) { + ret = create_ns2_led(pdev, &priv->leds_data[i], + &pdata->leds[i]); if (ret < 0) { for (i = i - 1; i >= 0; i--) - delete_ns2_led(&leds_data[i]); + delete_ns2_led(&priv->leds_data[i]); return ret; } } - platform_set_drvdata(pdev, leds_data); + platform_set_drvdata(pdev, priv); return 0; } @@ -352,13 +367,12 @@ static int ns2_led_probe(struct platform_device *pdev) static int ns2_led_remove(struct platform_device *pdev) { int i; - struct ns2_led_platform_data *pdata = pdev->dev.platform_data; - struct ns2_led_data *leds_data; + struct ns2_led_priv *priv; - leds_data = platform_get_drvdata(pdev); + priv = platform_get_drvdata(pdev); - for (i = 0; i < pdata->num_leds; i++) - delete_ns2_led(&leds_data[i]); + for (i = 0; i < priv->num_leds; i++) + delete_ns2_led(&priv->leds_data[i]); platform_set_drvdata(pdev, NULL); diff --git a/drivers/leds/leds-pwm.c b/drivers/leds/leds-pwm.c index a1ea5f6a8d39..faf52c005e8c 100644 --- a/drivers/leds/leds-pwm.c +++ b/drivers/leds/leds-pwm.c @@ -23,12 +23,16 @@ #include <linux/pwm.h> #include <linux/leds_pwm.h> #include <linux/slab.h> +#include <linux/workqueue.h> struct led_pwm_data { struct led_classdev cdev; struct pwm_device *pwm; + struct work_struct work; unsigned int active_low; unsigned int period; + int duty; + bool can_sleep; }; struct led_pwm_priv { @@ -36,6 +40,26 @@ struct led_pwm_priv { struct led_pwm_data leds[0]; }; +static void __led_pwm_set(struct led_pwm_data *led_dat) +{ + int new_duty = led_dat->duty; + + pwm_config(led_dat->pwm, new_duty, led_dat->period); + + if (new_duty == 0) + pwm_disable(led_dat->pwm); + else + pwm_enable(led_dat->pwm); +} + +static void led_pwm_work(struct work_struct *work) +{ + struct led_pwm_data *led_dat = + container_of(work, struct led_pwm_data, work); + + __led_pwm_set(led_dat); +} + static void led_pwm_set(struct led_classdev *led_cdev, enum led_brightness brightness) { @@ -44,13 +68,12 @@ static void led_pwm_set(struct led_classdev *led_cdev, unsigned int max = led_dat->cdev.max_brightness; unsigned int period = led_dat->period; - if (brightness == 0) { - pwm_config(led_dat->pwm, 0, period); - pwm_disable(led_dat->pwm); - } else { - pwm_config(led_dat->pwm, brightness * period / max, period); - pwm_enable(led_dat->pwm); - } + led_dat->duty = brightness * period / max; + + if (led_dat->can_sleep) + schedule_work(&led_dat->work); + else + __led_pwm_set(led_dat); } static inline size_t sizeof_pwm_leds_priv(int num_leds) @@ -100,6 +123,10 @@ static struct led_pwm_priv *led_pwm_create_of(struct platform_device *pdev) led_dat->cdev.brightness = LED_OFF; led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME; + led_dat->can_sleep = pwm_can_sleep(led_dat->pwm); + if (led_dat->can_sleep) + INIT_WORK(&led_dat->work, led_pwm_work); + ret = led_classdev_register(&pdev->dev, &led_dat->cdev); if (ret < 0) { dev_err(&pdev->dev, "failed to register for %s\n", @@ -153,6 +180,10 @@ static int led_pwm_probe(struct platform_device *pdev) led_dat->cdev.max_brightness = cur_led->max_brightness; led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME; + led_dat->can_sleep = pwm_can_sleep(led_dat->pwm); + if (led_dat->can_sleep) + INIT_WORK(&led_dat->work, led_pwm_work); + ret = led_classdev_register(&pdev->dev, &led_dat->cdev); if (ret < 0) goto err; @@ -180,8 +211,11 @@ static int led_pwm_remove(struct platform_device *pdev) struct led_pwm_priv *priv = platform_get_drvdata(pdev); int i; - for (i = 0; i < priv->num_leds; i++) + for (i = 0; i < priv->num_leds; i++) { led_classdev_unregister(&priv->leds[i].cdev); + if (priv->leds[i].can_sleep) + cancel_work_sync(&priv->leds[i].work); + } return 0; } diff --git a/drivers/leds/leds-renesas-tpu.c b/drivers/leds/leds-renesas-tpu.c index d3c2b7e68fbc..9483f1c1078d 100644 --- a/drivers/leds/leds-renesas-tpu.c +++ b/drivers/leds/leds-renesas-tpu.c @@ -205,7 +205,8 @@ static void r_tpu_set_pin(struct r_tpu_priv *p, enum r_tpu_pin new_state, gpio_free(cfg->pin_gpio_fn); if (new_state == R_TPU_PIN_GPIO) - gpio_request_one(cfg->pin_gpio, GPIOF_DIR_OUT | !!brightness, + gpio_request_one(cfg->pin_gpio, !!brightness ? + GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW, cfg->name); if (new_state == R_TPU_PIN_GPIO_FN) diff --git a/drivers/leds/leds-tca6507.c b/drivers/leds/leds-tca6507.c index 070ba0741b21..98fe021ba276 100644 --- a/drivers/leds/leds-tca6507.c +++ b/drivers/leds/leds-tca6507.c @@ -85,6 +85,7 @@ #include <linux/gpio.h> #include <linux/workqueue.h> #include <linux/leds-tca6507.h> +#include <linux/of.h> /* LED select registers determine the source that drives LED outputs */ #define TCA6507_LS_LED_OFF 0x0 /* Output HI-Z (off) */ @@ -724,7 +725,6 @@ tca6507_led_dt_init(struct i2c_client *client) return ERR_PTR(-ENODEV); } -#define of_tca6507_leds_match NULL #endif static int tca6507_probe(struct i2c_client *client, @@ -813,7 +813,7 @@ static struct i2c_driver tca6507_driver = { .driver = { .name = "leds-tca6507", .owner = THIS_MODULE, - .of_match_table = of_tca6507_leds_match, + .of_match_table = of_match_ptr(of_tca6507_leds_match), }, .probe = tca6507_probe, .remove = tca6507_remove, diff --git a/drivers/leds/leds-wm8350.c b/drivers/leds/leds-wm8350.c index ed15157c8f6c..8a181d56602d 100644 --- a/drivers/leds/leds-wm8350.c +++ b/drivers/leds/leds-wm8350.c @@ -129,7 +129,10 @@ static void wm8350_led_disable(struct wm8350_led *led) ret = regulator_disable(led->isink); if (ret != 0) { dev_err(led->cdev.dev, "Failed to disable ISINK: %d\n", ret); - regulator_enable(led->dcdc); + ret = regulator_enable(led->dcdc); + if (ret != 0) + dev_err(led->cdev.dev, "Failed to reenable DCDC: %d\n", + ret); return; } diff --git a/drivers/leds/trigger/Kconfig b/drivers/leds/trigger/Kconfig new file mode 100644 index 000000000000..49794b47b51c --- /dev/null +++ b/drivers/leds/trigger/Kconfig @@ -0,0 +1,111 @@ +menuconfig LEDS_TRIGGERS + bool "LED Trigger support" + depends on LEDS_CLASS + help + This option enables trigger support for the leds class. + These triggers allow kernel events to drive the LEDs and can + be configured via sysfs. If unsure, say Y. + +if LEDS_TRIGGERS + +config LEDS_TRIGGER_TIMER + tristate "LED Timer Trigger" + depends on LEDS_TRIGGERS + help + This allows LEDs to be controlled by a programmable timer + via sysfs. Some LED hardware can be programmed to start + blinking the LED without any further software interaction. + For more details read Documentation/leds/leds-class.txt. + + If unsure, say Y. + +config LEDS_TRIGGER_ONESHOT + tristate "LED One-shot Trigger" + depends on LEDS_TRIGGERS + help + This allows LEDs to blink in one-shot pulses with parameters + controlled via sysfs. It's useful to notify the user on + sporadic events, when there are no clear begin and end trap points, + or on dense events, where this blinks the LED at constant rate if + rearmed continuously. + + It also shows how to use the led_blink_set_oneshot() function. + + If unsure, say Y. + +config LEDS_TRIGGER_IDE_DISK + bool "LED IDE Disk Trigger" + depends on IDE_GD_ATA + depends on LEDS_TRIGGERS + help + This allows LEDs to be controlled by IDE disk activity. + If unsure, say Y. + +config LEDS_TRIGGER_HEARTBEAT + tristate "LED Heartbeat Trigger" + depends on LEDS_TRIGGERS + help + This allows LEDs to be controlled by a CPU load average. + The flash frequency is a hyperbolic function of the 1-minute + load average. + If unsure, say Y. + +config LEDS_TRIGGER_BACKLIGHT + tristate "LED backlight Trigger" + depends on LEDS_TRIGGERS + help + This allows LEDs to be controlled as a backlight device: they + turn off and on when the display is blanked and unblanked. + + If unsure, say N. + +config LEDS_TRIGGER_CPU + bool "LED CPU Trigger" + depends on LEDS_TRIGGERS + help + This allows LEDs to be controlled by active CPUs. This shows + the active CPUs across an array of LEDs so you can see which + CPUs are active on the system at any given moment. + + If unsure, say N. + +config LEDS_TRIGGER_GPIO + tristate "LED GPIO Trigger" + depends on LEDS_TRIGGERS + depends on GPIOLIB + help + This allows LEDs to be controlled by gpio events. It's good + when using gpios as switches and triggering the needed LEDs + from there. One use case is n810's keypad LEDs that could + be triggered by this trigger when user slides up to show + keypad. + + If unsure, say N. + +config LEDS_TRIGGER_DEFAULT_ON + tristate "LED Default ON Trigger" + depends on LEDS_TRIGGERS + help + This allows LEDs to be initialised in the ON state. + If unsure, say Y. + +comment "iptables trigger is under Netfilter config (LED target)" + depends on LEDS_TRIGGERS + +config LEDS_TRIGGER_TRANSIENT + tristate "LED Transient Trigger" + depends on LEDS_TRIGGERS + help + This allows one time activation of a transient state on + GPIO/PWM based hardware. + If unsure, say Y. + +config LEDS_TRIGGER_CAMERA + tristate "LED Camera Flash/Torch Trigger" + depends on LEDS_TRIGGERS + help + This allows LEDs to be controlled as a camera flash/torch device. + This enables direct flash/torch on/off by the driver, kernel space. + If unsure, say Y. + +endif # LEDS_TRIGGERS diff --git a/drivers/leds/trigger/Makefile b/drivers/leds/trigger/Makefile new file mode 100644 index 000000000000..1abf48dacf7e --- /dev/null +++ b/drivers/leds/trigger/Makefile @@ -0,0 +1,10 @@ +obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o +obj-$(CONFIG_LEDS_TRIGGER_ONESHOT) += ledtrig-oneshot.o +obj-$(CONFIG_LEDS_TRIGGER_IDE_DISK) += ledtrig-ide-disk.o +obj-$(CONFIG_LEDS_TRIGGER_HEARTBEAT) += ledtrig-heartbeat.o +obj-$(CONFIG_LEDS_TRIGGER_BACKLIGHT) += ledtrig-backlight.o +obj-$(CONFIG_LEDS_TRIGGER_GPIO) += ledtrig-gpio.o +obj-$(CONFIG_LEDS_TRIGGER_CPU) += ledtrig-cpu.o +obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o +obj-$(CONFIG_LEDS_TRIGGER_TRANSIENT) += ledtrig-transient.o +obj-$(CONFIG_LEDS_TRIGGER_CAMERA) += ledtrig-camera.o diff --git a/drivers/leds/ledtrig-backlight.c b/drivers/leds/trigger/ledtrig-backlight.c index 027a2b15d7d8..3c9c88a07eb8 100644 --- a/drivers/leds/ledtrig-backlight.c +++ b/drivers/leds/trigger/ledtrig-backlight.c @@ -16,7 +16,7 @@ #include <linux/init.h> #include <linux/fb.h> #include <linux/leds.h> -#include "leds.h" +#include "../leds.h" #define BLANK 1 #define UNBLANK 0 diff --git a/drivers/leds/trigger/ledtrig-camera.c b/drivers/leds/trigger/ledtrig-camera.c new file mode 100644 index 000000000000..9bd73a8bad5c --- /dev/null +++ b/drivers/leds/trigger/ledtrig-camera.c @@ -0,0 +1,57 @@ +/* + * Camera Flash and Torch On/Off Trigger + * + * based on ledtrig-ide-disk.c + * + * Copyright 2013 Texas Instruments + * + * Author: Milo(Woogyom) Kim <milo.kim@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/leds.h> + +DEFINE_LED_TRIGGER(ledtrig_flash); +DEFINE_LED_TRIGGER(ledtrig_torch); + +void ledtrig_flash_ctrl(bool on) +{ + enum led_brightness brt = on ? LED_FULL : LED_OFF; + + led_trigger_event(ledtrig_flash, brt); +} +EXPORT_SYMBOL_GPL(ledtrig_flash_ctrl); + +void ledtrig_torch_ctrl(bool on) +{ + enum led_brightness brt = on ? LED_FULL : LED_OFF; + + led_trigger_event(ledtrig_torch, brt); +} +EXPORT_SYMBOL_GPL(ledtrig_torch_ctrl); + +static int __init ledtrig_camera_init(void) +{ + led_trigger_register_simple("flash", &ledtrig_flash); + led_trigger_register_simple("torch", &ledtrig_torch); + return 0; +} +module_init(ledtrig_camera_init); + +static void __exit ledtrig_camera_exit(void) +{ + led_trigger_unregister_simple(ledtrig_torch); + led_trigger_unregister_simple(ledtrig_flash); +} +module_exit(ledtrig_camera_exit); + +MODULE_DESCRIPTION("LED Trigger for Camera Flash/Torch Control"); +MODULE_AUTHOR("Milo Kim"); +MODULE_LICENSE("GPL"); diff --git a/drivers/leds/ledtrig-cpu.c b/drivers/leds/trigger/ledtrig-cpu.c index 4239b3955ff0..118335eccc56 100644 --- a/drivers/leds/ledtrig-cpu.c +++ b/drivers/leds/trigger/ledtrig-cpu.c @@ -26,7 +26,7 @@ #include <linux/percpu.h> #include <linux/syscore_ops.h> #include <linux/rwsem.h> -#include "leds.h" +#include "../leds.h" #define MAX_NAME_LEN 8 diff --git a/drivers/leds/ledtrig-default-on.c b/drivers/leds/trigger/ledtrig-default-on.c index eac1f1b1adac..81a91be8e18d 100644 --- a/drivers/leds/ledtrig-default-on.c +++ b/drivers/leds/trigger/ledtrig-default-on.c @@ -15,7 +15,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/leds.h> -#include "leds.h" +#include "../leds.h" static void defon_trig_activate(struct led_classdev *led_cdev) { diff --git a/drivers/leds/ledtrig-gpio.c b/drivers/leds/trigger/ledtrig-gpio.c index 72e3ebfc281f..35812e3a37f2 100644 --- a/drivers/leds/ledtrig-gpio.c +++ b/drivers/leds/trigger/ledtrig-gpio.c @@ -17,7 +17,7 @@ #include <linux/workqueue.h> #include <linux/leds.h> #include <linux/slab.h> -#include "leds.h" +#include "../leds.h" struct gpio_trig_data { struct led_classdev *led; diff --git a/drivers/leds/ledtrig-heartbeat.c b/drivers/leds/trigger/ledtrig-heartbeat.c index 1edc7463ce83..5c8464a33172 100644 --- a/drivers/leds/ledtrig-heartbeat.c +++ b/drivers/leds/trigger/ledtrig-heartbeat.c @@ -19,7 +19,7 @@ #include <linux/sched.h> #include <linux/leds.h> #include <linux/reboot.h> -#include "leds.h" +#include "../leds.h" static int panic_heartbeats; diff --git a/drivers/leds/ledtrig-ide-disk.c b/drivers/leds/trigger/ledtrig-ide-disk.c index 2cd7c0cf5924..2cd7c0cf5924 100644 --- a/drivers/leds/ledtrig-ide-disk.c +++ b/drivers/leds/trigger/ledtrig-ide-disk.c diff --git a/drivers/leds/ledtrig-oneshot.c b/drivers/leds/trigger/ledtrig-oneshot.c index 2c029aa5c4f1..cb4c7466692a 100644 --- a/drivers/leds/ledtrig-oneshot.c +++ b/drivers/leds/trigger/ledtrig-oneshot.c @@ -18,7 +18,7 @@ #include <linux/ctype.h> #include <linux/slab.h> #include <linux/leds.h> -#include "leds.h" +#include "../leds.h" #define DEFAULT_DELAY 100 diff --git a/drivers/leds/ledtrig-timer.c b/drivers/leds/trigger/ledtrig-timer.c index f774d0592204..8d09327b5719 100644 --- a/drivers/leds/ledtrig-timer.c +++ b/drivers/leds/trigger/ledtrig-timer.c @@ -17,7 +17,6 @@ #include <linux/device.h> #include <linux/ctype.h> #include <linux/leds.h> -#include "leds.h" static ssize_t led_delay_on_show(struct device *dev, struct device_attribute *attr, char *buf) diff --git a/drivers/leds/ledtrig-transient.c b/drivers/leds/trigger/ledtrig-transient.c index 398f1042c43e..e5abc00bb00c 100644 --- a/drivers/leds/ledtrig-transient.c +++ b/drivers/leds/trigger/ledtrig-transient.c @@ -25,7 +25,7 @@ #include <linux/slab.h> #include <linux/timer.h> #include <linux/leds.h> -#include "leds.h" +#include "../leds.h" struct transient_trig_data { int activate; |