diff options
Diffstat (limited to 'drivers/media/video/em28xx/em28xx-cards.c')
| -rw-r--r-- | drivers/media/video/em28xx/em28xx-cards.c | 49 |
1 files changed, 44 insertions, 5 deletions
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index 69fcea82d01c..4e37375decf5 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -100,6 +100,13 @@ static struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = { { -1, -1, -1, -1}, }; +/* Board Hauppauge WinTV HVR 900 (R2) digital */ +static struct em28xx_reg_seq hauppauge_wintv_hvr_900R2_digital[] = { + {EM28XX_R08_GPIO, 0x2e, ~EM_GPIO_4, 10}, + {EM2880_R04_GPO, 0x0c, 0x0f, 10}, + { -1, -1, -1, -1}, +}; + /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */ static struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = { {EM28XX_R08_GPIO, 0x69, ~EM_GPIO_4, 10}, @@ -282,6 +289,16 @@ static struct em28xx_reg_seq leadership_reset[] = { { -1, -1, -1, -1}, }; +/* 2013:024f PCTV Systems nanoStick T2 290e + * GPIO_6 - demod reset + * GPIO_7 - LED + */ +static struct em28xx_reg_seq pctv_290e[] = { + {EM2874_R80_GPIO, 0x00, 0xff, 80}, + {EM2874_R80_GPIO, 0x40, 0xff, 80}, /* GPIO_6 = 1 */ + {EM2874_R80_GPIO, 0xc0, 0xff, 80}, /* GPIO_7 = 1 */ + {-1, -1, -1, -1}, +}; /* * Board definitions @@ -859,6 +876,8 @@ struct em28xx_board em28xx_boards[] = { .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, .mts_firmware = 1, + .has_dvb = 1, + .dvb_gpio = hauppauge_wintv_hvr_900R2_digital, .ir_codes = RC_MAP_HAUPPAUGE, .decoder = EM28XX_TVP5150, .input = { { @@ -1448,12 +1467,14 @@ struct em28xx_board em28xx_boards[] = { .gpio = pinnacle_hybrid_pro_analog, } }, }, - [EM2882_BOARD_PINNACLE_HYBRID_PRO] = { - .name = "Pinnacle Hybrid Pro (2)", - .valid = EM28XX_BOARD_NOT_VALIDATED, + [EM2882_BOARD_PINNACLE_HYBRID_PRO_330E] = { + .name = "Pinnacle Hybrid Pro (330e)", .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, .mts_firmware = 1, + .has_dvb = 1, + .dvb_gpio = hauppauge_wintv_hvr_900R2_digital, + .ir_codes = RC_MAP_PINNACLE_PCTV_HD, .decoder = EM28XX_TVP5150, .input = { { .type = EM28XX_VMUX_TELEVISION, @@ -1749,6 +1770,17 @@ struct em28xx_board em28xx_boards[] = { .dvb_gpio = kworld_a340_digital, .tuner_gpio = default_tuner_gpio, }, + /* 2013:024f PCTV Systems nanoStick T2 290e. + * Empia EM28174, Sony CXD2820R and NXP TDA18271HD/C2 */ + [EM28174_BOARD_PCTV_290E] = { + .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT | + EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_100_KHZ, + .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, + .name = "PCTV Systems nanoStick T2 290e", + .tuner_type = TUNER_ABSENT, + .tuner_gpio = pctv_290e, + .has_dvb = 1, + }, }; const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards); @@ -1863,7 +1895,7 @@ struct usb_device_id em28xx_id_table[] = { { USB_DEVICE(0x2304, 0x021a), .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, { USB_DEVICE(0x2304, 0x0226), - .driver_info = EM2882_BOARD_PINNACLE_HYBRID_PRO }, + .driver_info = EM2882_BOARD_PINNACLE_HYBRID_PRO_330E }, { USB_DEVICE(0x2304, 0x0227), .driver_info = EM2880_BOARD_PINNACLE_PCTV_HD_PRO }, { USB_DEVICE(0x0413, 0x6023), @@ -1876,6 +1908,8 @@ struct usb_device_id em28xx_id_table[] = { .driver_info = EM2860_BOARD_GADMEI_UTV330 }, { USB_DEVICE(0x1b80, 0xa340), .driver_info = EM2870_BOARD_KWORLD_A340 }, + { USB_DEVICE(0x2013, 0x024f), + .driver_info = EM28174_BOARD_PCTV_290E }, { }, }; MODULE_DEVICE_TABLE(usb, em28xx_id_table); @@ -2229,7 +2263,7 @@ static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl) ctl->demod = XC3028_FE_ZARLINK456; break; case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2: - /* djh - Not sure which demod we need here */ + case EM2882_BOARD_PINNACLE_HYBRID_PRO_330E: ctl->demod = XC3028_FE_DEFAULT; break; case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600: @@ -2799,6 +2833,11 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, dev->reg_gpio_num = EM2874_R80_GPIO; dev->wait_after_write = 0; break; + case CHIP_ID_EM28174: + em28xx_info("chip ID is em28174\n"); + dev->reg_gpio_num = EM2874_R80_GPIO; + dev->wait_after_write = 0; + break; case CHIP_ID_EM2883: em28xx_info("chip ID is em2882/em2883\n"); dev->wait_after_write = 0; |