diff options
Diffstat (limited to 'drivers/mtd/nand/atmel_nand.c')
-rw-r--r-- | drivers/mtd/nand/atmel_nand.c | 141 |
1 files changed, 117 insertions, 24 deletions
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c index c516a9408087..ffcbcca2fd2d 100644 --- a/drivers/mtd/nand/atmel_nand.c +++ b/drivers/mtd/nand/atmel_nand.c @@ -101,6 +101,8 @@ struct atmel_nand_host { u8 pmecc_corr_cap; u16 pmecc_sector_size; u32 pmecc_lookup_table_offset; + u32 pmecc_lookup_table_offset_512; + u32 pmecc_lookup_table_offset_1024; int pmecc_bytes_per_sector; int pmecc_sector_number; @@ -908,6 +910,84 @@ static void atmel_pmecc_core_init(struct mtd_info *mtd) pmecc_writel(host->ecc, CTRL, PMECC_CTRL_ENABLE); } +/* + * Get ECC requirement in ONFI parameters, returns -1 if ONFI + * parameters is not supported. + * return 0 if success to get the ECC requirement. + */ +static int get_onfi_ecc_param(struct nand_chip *chip, + int *ecc_bits, int *sector_size) +{ + *ecc_bits = *sector_size = 0; + + if (chip->onfi_params.ecc_bits == 0xff) + /* TODO: the sector_size and ecc_bits need to be find in + * extended ecc parameter, currently we don't support it. + */ + return -1; + + *ecc_bits = chip->onfi_params.ecc_bits; + + /* The default sector size (ecc codeword size) is 512 */ + *sector_size = 512; + + return 0; +} + +/* + * Get ecc requirement from ONFI parameters ecc requirement. + * If pmecc-cap, pmecc-sector-size in DTS are not specified, this function + * will set them according to ONFI ecc requirement. Otherwise, use the + * value in DTS file. + * return 0 if success. otherwise return error code. + */ +static int pmecc_choose_ecc(struct atmel_nand_host *host, + int *cap, int *sector_size) +{ + /* Get ECC requirement from ONFI parameters */ + *cap = *sector_size = 0; + if (host->nand_chip.onfi_version) { + if (!get_onfi_ecc_param(&host->nand_chip, cap, sector_size)) + dev_info(host->dev, "ONFI params, minimum required ECC: %d bits in %d bytes\n", + *cap, *sector_size); + else + dev_info(host->dev, "NAND chip ECC reqirement is in Extended ONFI parameter, we don't support yet.\n"); + } else { + dev_info(host->dev, "NAND chip is not ONFI compliant, assume ecc_bits is 2 in 512 bytes"); + } + if (*cap == 0 && *sector_size == 0) { + *cap = 2; + *sector_size = 512; + } + + /* If dts file doesn't specify then use the one in ONFI parameters */ + if (host->pmecc_corr_cap == 0) { + /* use the most fitable ecc bits (the near bigger one ) */ + if (*cap <= 2) + host->pmecc_corr_cap = 2; + else if (*cap <= 4) + host->pmecc_corr_cap = 4; + else if (*cap < 8) + host->pmecc_corr_cap = 8; + else if (*cap < 12) + host->pmecc_corr_cap = 12; + else if (*cap < 24) + host->pmecc_corr_cap = 24; + else + return -EINVAL; + } + if (host->pmecc_sector_size == 0) { + /* use the most fitable sector size (the near smaller one ) */ + if (*sector_size >= 1024) + host->pmecc_sector_size = 1024; + else if (*sector_size >= 512) + host->pmecc_sector_size = 512; + else + return -EINVAL; + } + return 0; +} + static int __init atmel_pmecc_nand_init_params(struct platform_device *pdev, struct atmel_nand_host *host) { @@ -916,8 +996,22 @@ static int __init atmel_pmecc_nand_init_params(struct platform_device *pdev, struct resource *regs, *regs_pmerr, *regs_rom; int cap, sector_size, err_no; + err_no = pmecc_choose_ecc(host, &cap, §or_size); + if (err_no) { + dev_err(host->dev, "The NAND flash's ECC requirement are not support!"); + return err_no; + } + + if (cap != host->pmecc_corr_cap || + sector_size != host->pmecc_sector_size) + dev_info(host->dev, "WARNING: Be Caution! Using different PMECC parameters from Nand ONFI ECC reqirement.\n"); + cap = host->pmecc_corr_cap; sector_size = host->pmecc_sector_size; + host->pmecc_lookup_table_offset = (sector_size == 512) ? + host->pmecc_lookup_table_offset_512 : + host->pmecc_lookup_table_offset_1024; + dev_info(host->dev, "Initialize PMECC params, cap: %d, sector: %d\n", cap, sector_size); @@ -1215,7 +1309,7 @@ static void atmel_nand_hwctl(struct mtd_info *mtd, int mode) static int atmel_of_init_port(struct atmel_nand_host *host, struct device_node *np) { - u32 val, table_offset; + u32 val; u32 offset[2]; int ecc_mode; struct atmel_nand_data *board = &host->board; @@ -1259,42 +1353,41 @@ static int atmel_of_init_port(struct atmel_nand_host *host, /* use PMECC, get correction capability, sector size and lookup * table offset. + * If correction bits and sector size are not specified, then find + * them from NAND ONFI parameters. */ - if (of_property_read_u32(np, "atmel,pmecc-cap", &val) != 0) { - dev_err(host->dev, "Cannot decide PMECC Capability\n"); - return -EINVAL; - } else if ((val != 2) && (val != 4) && (val != 8) && (val != 12) && - (val != 24)) { - dev_err(host->dev, - "Unsupported PMECC correction capability: %d; should be 2, 4, 8, 12 or 24\n", - val); - return -EINVAL; + if (of_property_read_u32(np, "atmel,pmecc-cap", &val) == 0) { + if ((val != 2) && (val != 4) && (val != 8) && (val != 12) && + (val != 24)) { + dev_err(host->dev, + "Unsupported PMECC correction capability: %d; should be 2, 4, 8, 12 or 24\n", + val); + return -EINVAL; + } + host->pmecc_corr_cap = (u8)val; } - host->pmecc_corr_cap = (u8)val; - if (of_property_read_u32(np, "atmel,pmecc-sector-size", &val) != 0) { - dev_err(host->dev, "Cannot decide PMECC Sector Size\n"); - return -EINVAL; - } else if ((val != 512) && (val != 1024)) { - dev_err(host->dev, - "Unsupported PMECC sector size: %d; should be 512 or 1024 bytes\n", - val); - return -EINVAL; + if (of_property_read_u32(np, "atmel,pmecc-sector-size", &val) == 0) { + if ((val != 512) && (val != 1024)) { + dev_err(host->dev, + "Unsupported PMECC sector size: %d; should be 512 or 1024 bytes\n", + val); + return -EINVAL; + } + host->pmecc_sector_size = (u16)val; } - host->pmecc_sector_size = (u16)val; if (of_property_read_u32_array(np, "atmel,pmecc-lookup-table-offset", offset, 2) != 0) { dev_err(host->dev, "Cannot get PMECC lookup table offset\n"); return -EINVAL; } - table_offset = host->pmecc_sector_size == 512 ? offset[0] : offset[1]; - - if (!table_offset) { + if (!offset[0] && !offset[1]) { dev_err(host->dev, "Invalid PMECC lookup table offset\n"); return -EINVAL; } - host->pmecc_lookup_table_offset = table_offset; + host->pmecc_lookup_table_offset_512 = offset[0]; + host->pmecc_lookup_table_offset_1024 = offset[1]; return 0; } |