diff options
Diffstat (limited to 'drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c')
-rw-r--r-- | drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c | 113 |
1 files changed, 56 insertions, 57 deletions
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c index 689470c1e8ad..f28140a05f09 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c @@ -102,7 +102,7 @@ s32 ixgbe_read_i2c_combined_generic_int(struct ixgbe_hw *hw, u8 addr, csum = ~csum; do { if (lock && hw->mac.ops.acquire_swfw_sync(hw, swfw_mask)) - return IXGBE_ERR_SWFW_SYNC; + return -EBUSY; ixgbe_i2c_start(hw); /* Device Address and write indication */ if (ixgbe_out_i2c_byte_ack(hw, addr)) @@ -150,7 +150,7 @@ fail: hw_dbg(hw, "I2C byte read combined error.\n"); } while (retry < max_retry); - return IXGBE_ERR_I2C; + return -EIO; } /** @@ -179,7 +179,7 @@ s32 ixgbe_write_i2c_combined_generic_int(struct ixgbe_hw *hw, u8 addr, csum = ~csum; do { if (lock && hw->mac.ops.acquire_swfw_sync(hw, swfw_mask)) - return IXGBE_ERR_SWFW_SYNC; + return -EBUSY; ixgbe_i2c_start(hw); /* Device Address and write indication */ if (ixgbe_out_i2c_byte_ack(hw, addr)) @@ -215,7 +215,7 @@ fail: hw_dbg(hw, "I2C byte write combined error.\n"); } while (retry < max_retry); - return IXGBE_ERR_I2C; + return -EIO; } /** @@ -262,8 +262,8 @@ static bool ixgbe_probe_phy(struct ixgbe_hw *hw, u16 phy_addr) **/ s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw) { + u32 status = -EFAULT; u32 phy_addr; - u32 status = IXGBE_ERR_PHY_ADDR_INVALID; if (!hw->phy.phy_semaphore_mask) { if (hw->bus.lan_id) @@ -276,13 +276,12 @@ s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw) return 0; if (hw->phy.nw_mng_if_sel) { - phy_addr = (hw->phy.nw_mng_if_sel & - IXGBE_NW_MNG_IF_SEL_MDIO_PHY_ADD) >> - IXGBE_NW_MNG_IF_SEL_MDIO_PHY_ADD_SHIFT; + phy_addr = FIELD_GET(IXGBE_NW_MNG_IF_SEL_MDIO_PHY_ADD, + hw->phy.nw_mng_if_sel); if (ixgbe_probe_phy(hw, phy_addr)) return 0; else - return IXGBE_ERR_PHY_ADDR_INVALID; + return -EFAULT; } for (phy_addr = 0; phy_addr < IXGBE_MAX_PHY_ADDR; phy_addr++) { @@ -408,8 +407,7 @@ s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw) return status; /* Don't reset PHY if it's shut down due to overtemp. */ - if (!hw->phy.reset_if_overtemp && - (IXGBE_ERR_OVERTEMP == hw->phy.ops.check_overtemp(hw))) + if (!hw->phy.reset_if_overtemp && hw->phy.ops.check_overtemp(hw)) return 0; /* Blocked by MNG FW so bail */ @@ -457,7 +455,7 @@ s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw) if (ctrl & MDIO_CTRL1_RESET) { hw_dbg(hw, "PHY reset polling failed to complete.\n"); - return IXGBE_ERR_RESET_FAILED; + return -EIO; } return 0; @@ -500,7 +498,7 @@ s32 ixgbe_read_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type, if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) { hw_dbg(hw, "PHY address command did not complete.\n"); - return IXGBE_ERR_PHY; + return -EIO; } /* Address cycle complete, setup and write the read @@ -527,7 +525,7 @@ s32 ixgbe_read_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type, if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) { hw_dbg(hw, "PHY read command didn't complete\n"); - return IXGBE_ERR_PHY; + return -EIO; } /* Read operation is complete. Get the data @@ -559,7 +557,7 @@ s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr, phy_data); hw->mac.ops.release_swfw_sync(hw, gssr); } else { - return IXGBE_ERR_SWFW_SYNC; + return -EBUSY; } return status; @@ -604,7 +602,7 @@ s32 ixgbe_write_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr, if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) { hw_dbg(hw, "PHY address cmd didn't complete\n"); - return IXGBE_ERR_PHY; + return -EIO; } /* @@ -632,7 +630,7 @@ s32 ixgbe_write_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr, if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) { hw_dbg(hw, "PHY write cmd didn't complete\n"); - return IXGBE_ERR_PHY; + return -EIO; } return 0; @@ -657,7 +655,7 @@ s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr, phy_data); hw->mac.ops.release_swfw_sync(hw, gssr); } else { - return IXGBE_ERR_SWFW_SYNC; + return -EBUSY; } return status; @@ -1430,7 +1428,7 @@ s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw) if ((phy_data & MDIO_CTRL1_RESET) != 0) { hw_dbg(hw, "PHY reset did not complete.\n"); - return IXGBE_ERR_PHY; + return -EIO; } /* Get init offsets */ @@ -1448,8 +1446,7 @@ s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw) ret_val = hw->eeprom.ops.read(hw, data_offset, &eword); if (ret_val) goto err_eeprom; - control = (eword & IXGBE_CONTROL_MASK_NL) >> - IXGBE_CONTROL_SHIFT_NL; + control = FIELD_GET(IXGBE_CONTROL_MASK_NL, eword); edata = eword & IXGBE_DATA_MASK_NL; switch (control) { case IXGBE_DELAY_NL: @@ -1487,12 +1484,12 @@ s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw) hw_dbg(hw, "SOL\n"); } else { hw_dbg(hw, "Bad control value\n"); - return IXGBE_ERR_PHY; + return -EIO; } break; default: hw_dbg(hw, "Bad control type\n"); - return IXGBE_ERR_PHY; + return -EIO; } } @@ -1500,7 +1497,7 @@ s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw) err_eeprom: hw_err(hw, "eeprom read at offset %d failed\n", data_offset); - return IXGBE_ERR_PHY; + return -EIO; } /** @@ -1518,10 +1515,10 @@ s32 ixgbe_identify_module_generic(struct ixgbe_hw *hw) return ixgbe_identify_qsfp_module_generic(hw); default: hw->phy.sfp_type = ixgbe_sfp_type_not_present; - return IXGBE_ERR_SFP_NOT_PRESENT; + return -ENOENT; } - return IXGBE_ERR_SFP_NOT_PRESENT; + return -ENOENT; } /** @@ -1546,7 +1543,7 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_fiber) { hw->phy.sfp_type = ixgbe_sfp_type_not_present; - return IXGBE_ERR_SFP_NOT_PRESENT; + return -ENOENT; } /* LAN ID is needed for sfp_type determination */ @@ -1561,7 +1558,7 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) if (identifier != IXGBE_SFF_IDENTIFIER_SFP) { hw->phy.type = ixgbe_phy_sfp_unsupported; - return IXGBE_ERR_SFP_NOT_SUPPORTED; + return -EOPNOTSUPP; } status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_1GBE_COMP_CODES, @@ -1752,7 +1749,7 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 || hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1)) { hw->phy.type = ixgbe_phy_sfp_unsupported; - return IXGBE_ERR_SFP_NOT_SUPPORTED; + return -EOPNOTSUPP; } /* Anything else 82598-based is supported */ @@ -1776,7 +1773,7 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) } hw_dbg(hw, "SFP+ module not supported\n"); hw->phy.type = ixgbe_phy_sfp_unsupported; - return IXGBE_ERR_SFP_NOT_SUPPORTED; + return -EOPNOTSUPP; } return 0; @@ -1786,7 +1783,7 @@ err_read_i2c_eeprom: hw->phy.id = 0; hw->phy.type = ixgbe_phy_unknown; } - return IXGBE_ERR_SFP_NOT_PRESENT; + return -ENOENT; } /** @@ -1813,7 +1810,7 @@ static s32 ixgbe_identify_qsfp_module_generic(struct ixgbe_hw *hw) if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_fiber_qsfp) { hw->phy.sfp_type = ixgbe_sfp_type_not_present; - return IXGBE_ERR_SFP_NOT_PRESENT; + return -ENOENT; } /* LAN ID is needed for sfp_type determination */ @@ -1827,7 +1824,7 @@ static s32 ixgbe_identify_qsfp_module_generic(struct ixgbe_hw *hw) if (identifier != IXGBE_SFF_IDENTIFIER_QSFP_PLUS) { hw->phy.type = ixgbe_phy_sfp_unsupported; - return IXGBE_ERR_SFP_NOT_SUPPORTED; + return -EOPNOTSUPP; } hw->phy.id = identifier; @@ -1895,7 +1892,7 @@ static s32 ixgbe_identify_qsfp_module_generic(struct ixgbe_hw *hw) } else { /* unsupported module type */ hw->phy.type = ixgbe_phy_sfp_unsupported; - return IXGBE_ERR_SFP_NOT_SUPPORTED; + return -EOPNOTSUPP; } } @@ -1955,7 +1952,7 @@ static s32 ixgbe_identify_qsfp_module_generic(struct ixgbe_hw *hw) } hw_dbg(hw, "QSFP module not supported\n"); hw->phy.type = ixgbe_phy_sfp_unsupported; - return IXGBE_ERR_SFP_NOT_SUPPORTED; + return -EOPNOTSUPP; } return 0; } @@ -1966,7 +1963,7 @@ err_read_i2c_eeprom: hw->phy.id = 0; hw->phy.type = ixgbe_phy_unknown; - return IXGBE_ERR_SFP_NOT_PRESENT; + return -ENOENT; } /** @@ -1986,14 +1983,14 @@ s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw, u16 sfp_type = hw->phy.sfp_type; if (hw->phy.sfp_type == ixgbe_sfp_type_unknown) - return IXGBE_ERR_SFP_NOT_SUPPORTED; + return -EOPNOTSUPP; if (hw->phy.sfp_type == ixgbe_sfp_type_not_present) - return IXGBE_ERR_SFP_NOT_PRESENT; + return -ENOENT; if ((hw->device_id == IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM) && (hw->phy.sfp_type == ixgbe_sfp_type_da_cu)) - return IXGBE_ERR_SFP_NOT_SUPPORTED; + return -EOPNOTSUPP; /* * Limiting active cables and 1G Phys must be initialized as @@ -2014,11 +2011,11 @@ s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw, if (hw->eeprom.ops.read(hw, IXGBE_PHY_INIT_OFFSET_NL, list_offset)) { hw_err(hw, "eeprom read at %d failed\n", IXGBE_PHY_INIT_OFFSET_NL); - return IXGBE_ERR_SFP_NO_INIT_SEQ_PRESENT; + return -EIO; } if ((!*list_offset) || (*list_offset == 0xFFFF)) - return IXGBE_ERR_SFP_NO_INIT_SEQ_PRESENT; + return -EIO; /* Shift offset to first ID word */ (*list_offset)++; @@ -2037,7 +2034,7 @@ s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw, goto err_phy; if ((!*data_offset) || (*data_offset == 0xFFFF)) { hw_dbg(hw, "SFP+ module not supported\n"); - return IXGBE_ERR_SFP_NOT_SUPPORTED; + return -EOPNOTSUPP; } else { break; } @@ -2050,14 +2047,14 @@ s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw, if (sfp_id == IXGBE_PHY_INIT_END_NL) { hw_dbg(hw, "No matching SFP+ module found\n"); - return IXGBE_ERR_SFP_NOT_SUPPORTED; + return -EOPNOTSUPP; } return 0; err_phy: hw_err(hw, "eeprom read at offset %d failed\n", *list_offset); - return IXGBE_ERR_PHY; + return -EIO; } /** @@ -2152,7 +2149,7 @@ static s32 ixgbe_read_i2c_byte_generic_int(struct ixgbe_hw *hw, u8 byte_offset, do { if (lock && hw->mac.ops.acquire_swfw_sync(hw, swfw_mask)) - return IXGBE_ERR_SWFW_SYNC; + return -EBUSY; ixgbe_i2c_start(hw); @@ -2268,7 +2265,7 @@ static s32 ixgbe_write_i2c_byte_generic_int(struct ixgbe_hw *hw, u8 byte_offset, u32 swfw_mask = hw->phy.phy_semaphore_mask; if (lock && hw->mac.ops.acquire_swfw_sync(hw, swfw_mask)) - return IXGBE_ERR_SWFW_SYNC; + return -EBUSY; do { ixgbe_i2c_start(hw); @@ -2510,7 +2507,7 @@ static s32 ixgbe_get_i2c_ack(struct ixgbe_hw *hw) if (ack == 1) { hw_dbg(hw, "I2C ack was not received.\n"); - status = IXGBE_ERR_I2C; + status = -EIO; } ixgbe_lower_i2c_clk(hw, &i2cctl); @@ -2582,7 +2579,7 @@ static s32 ixgbe_clock_out_i2c_bit(struct ixgbe_hw *hw, bool data) udelay(IXGBE_I2C_T_LOW); } else { hw_dbg(hw, "I2C data was not set to %X\n", data); - return IXGBE_ERR_I2C; + return -EIO; } return 0; @@ -2678,7 +2675,7 @@ static s32 ixgbe_set_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl, bool data) *i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL(hw)); if (data != ixgbe_get_i2c_data(hw, i2cctl)) { hw_dbg(hw, "Error - I2C data was not set to %X.\n", data); - return IXGBE_ERR_I2C; + return -EIO; } return 0; @@ -2748,22 +2745,24 @@ static void ixgbe_i2c_bus_clear(struct ixgbe_hw *hw) * @hw: pointer to hardware structure * * Checks if the LASI temp alarm status was triggered due to overtemp + * + * Return true when an overtemp event detected, otherwise false. **/ -s32 ixgbe_tn_check_overtemp(struct ixgbe_hw *hw) +bool ixgbe_tn_check_overtemp(struct ixgbe_hw *hw) { u16 phy_data = 0; + u32 status; if (hw->device_id != IXGBE_DEV_ID_82599_T3_LOM) - return 0; + return false; /* Check that the LASI temp alarm status was triggered */ - hw->phy.ops.read_reg(hw, IXGBE_TN_LASI_STATUS_REG, - MDIO_MMD_PMAPMD, &phy_data); - - if (!(phy_data & IXGBE_TN_LASI_STATUS_TEMP_ALARM)) - return 0; + status = hw->phy.ops.read_reg(hw, IXGBE_TN_LASI_STATUS_REG, + MDIO_MMD_PMAPMD, &phy_data); + if (status) + return false; - return IXGBE_ERR_OVERTEMP; + return !!(phy_data & IXGBE_TN_LASI_STATUS_TEMP_ALARM); } /** ixgbe_set_copper_phy_power - Control power for copper phy |