diff options
Diffstat (limited to 'drivers/net/ks8851.c')
-rw-r--r-- | drivers/net/ks8851.c | 448 |
1 files changed, 396 insertions, 52 deletions
diff --git a/drivers/net/ks8851.c b/drivers/net/ks8851.c index 9e9f9b349766..b4fb07a6f13f 100644 --- a/drivers/net/ks8851.c +++ b/drivers/net/ks8851.c @@ -9,6 +9,8 @@ * published by the Free Software Foundation. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #define DEBUG #include <linux/module.h> @@ -76,7 +78,9 @@ union ks8851_tx_hdr { * @msg_enable: The message flags controlling driver output (see ethtool). * @fid: Incrementing frame id tag. * @rc_ier: Cached copy of KS_IER. + * @rc_ccr: Cached copy of KS_CCR. * @rc_rxqcr: Cached copy of KS_RXQCR. + * @eeprom_size: Companion eeprom size in Bytes, 0 if no eeprom * * The @lock ensures that the chip is protected when certain operations are * in progress. When the read or write packet transfer is in progress, most @@ -107,6 +111,8 @@ struct ks8851_net { u16 rc_ier; u16 rc_rxqcr; + u16 rc_ccr; + u16 eeprom_size; struct mii_if_info mii; struct ks8851_rxctrl rxctrl; @@ -125,11 +131,6 @@ struct ks8851_net { static int msg_enable; -#define ks_info(_ks, _msg...) dev_info(&(_ks)->spidev->dev, _msg) -#define ks_warn(_ks, _msg...) dev_warn(&(_ks)->spidev->dev, _msg) -#define ks_dbg(_ks, _msg...) dev_dbg(&(_ks)->spidev->dev, _msg) -#define ks_err(_ks, _msg...) dev_err(&(_ks)->spidev->dev, _msg) - /* shift for byte-enable data */ #define BYTE_EN(_x) ((_x) << 2) @@ -167,7 +168,7 @@ static void ks8851_wrreg16(struct ks8851_net *ks, unsigned reg, unsigned val) ret = spi_sync(ks->spidev, msg); if (ret < 0) - ks_err(ks, "spi_sync() failed\n"); + netdev_err(ks->netdev, "spi_sync() failed\n"); } /** @@ -197,7 +198,7 @@ static void ks8851_wrreg8(struct ks8851_net *ks, unsigned reg, unsigned val) ret = spi_sync(ks->spidev, msg); if (ret < 0) - ks_err(ks, "spi_sync() failed\n"); + netdev_err(ks->netdev, "spi_sync() failed\n"); } /** @@ -263,7 +264,7 @@ static void ks8851_rdreg(struct ks8851_net *ks, unsigned op, ret = spi_sync(ks->spidev, msg); if (ret < 0) - ks_err(ks, "read: spi_sync() failed\n"); + netdev_err(ks->netdev, "read: spi_sync() failed\n"); else if (ks8851_rx_1msg(ks)) memcpy(rxb, trx + 2, rxl); else @@ -417,8 +418,8 @@ static void ks8851_rdfifo(struct ks8851_net *ks, u8 *buff, unsigned len) u8 txb[1]; int ret; - if (netif_msg_rx_status(ks)) - ks_dbg(ks, "%s: %d@%p\n", __func__, len, buff); + netif_dbg(ks, rx_status, ks->netdev, + "%s: %d@%p\n", __func__, len, buff); /* set the operation we're issuing */ txb[0] = KS_SPIOP_RXFIFO; @@ -434,7 +435,7 @@ static void ks8851_rdfifo(struct ks8851_net *ks, u8 *buff, unsigned len) ret = spi_sync(ks->spidev, msg); if (ret < 0) - ks_err(ks, "%s: spi_sync() failed\n", __func__); + netdev_err(ks->netdev, "%s: spi_sync() failed\n", __func__); } /** @@ -446,10 +447,11 @@ static void ks8851_rdfifo(struct ks8851_net *ks, u8 *buff, unsigned len) */ static void ks8851_dbg_dumpkkt(struct ks8851_net *ks, u8 *rxpkt) { - ks_dbg(ks, "pkt %02x%02x%02x%02x %02x%02x%02x%02x %02x%02x%02x%02x\n", - rxpkt[4], rxpkt[5], rxpkt[6], rxpkt[7], - rxpkt[8], rxpkt[9], rxpkt[10], rxpkt[11], - rxpkt[12], rxpkt[13], rxpkt[14], rxpkt[15]); + netdev_dbg(ks->netdev, + "pkt %02x%02x%02x%02x %02x%02x%02x%02x %02x%02x%02x%02x\n", + rxpkt[4], rxpkt[5], rxpkt[6], rxpkt[7], + rxpkt[8], rxpkt[9], rxpkt[10], rxpkt[11], + rxpkt[12], rxpkt[13], rxpkt[14], rxpkt[15]); } /** @@ -471,8 +473,8 @@ static void ks8851_rx_pkts(struct ks8851_net *ks) rxfc = ks8851_rdreg8(ks, KS_RXFC); - if (netif_msg_rx_status(ks)) - ks_dbg(ks, "%s: %d packets\n", __func__, rxfc); + netif_dbg(ks, rx_status, ks->netdev, + "%s: %d packets\n", __func__, rxfc); /* Currently we're issuing a read per packet, but we could possibly * improve the code by issuing a single read, getting the receive @@ -489,9 +491,8 @@ static void ks8851_rx_pkts(struct ks8851_net *ks) rxstat = rxh & 0xffff; rxlen = rxh >> 16; - if (netif_msg_rx_status(ks)) - ks_dbg(ks, "rx: stat 0x%04x, len 0x%04x\n", - rxstat, rxlen); + netif_dbg(ks, rx_status, ks->netdev, + "rx: stat 0x%04x, len 0x%04x\n", rxstat, rxlen); /* the length of the packet includes the 32bit CRC */ @@ -553,9 +554,8 @@ static void ks8851_irq_work(struct work_struct *work) status = ks8851_rdreg16(ks, KS_ISR); - if (netif_msg_intr(ks)) - dev_dbg(&ks->spidev->dev, "%s: status 0x%04x\n", - __func__, status); + netif_dbg(ks, intr, ks->netdev, + "%s: status 0x%04x\n", __func__, status); if (status & IRQ_LCI) { /* should do something about checking link status */ @@ -582,8 +582,8 @@ static void ks8851_irq_work(struct work_struct *work) * system */ ks->tx_space = ks8851_rdreg16(ks, KS_TXMIR); - if (netif_msg_intr(ks)) - ks_dbg(ks, "%s: txspace %d\n", __func__, ks->tx_space); + netif_dbg(ks, intr, ks->netdev, + "%s: txspace %d\n", __func__, ks->tx_space); } if (status & IRQ_RXI) @@ -659,9 +659,8 @@ static void ks8851_wrpkt(struct ks8851_net *ks, struct sk_buff *txp, bool irq) unsigned fid = 0; int ret; - if (netif_msg_tx_queued(ks)) - dev_dbg(&ks->spidev->dev, "%s: skb %p, %d@%p, irq %d\n", - __func__, txp, txp->len, txp->data, irq); + netif_dbg(ks, tx_queued, ks->netdev, "%s: skb %p, %d@%p, irq %d\n", + __func__, txp, txp->len, txp->data, irq); fid = ks->fid++; fid &= TXFR_TXFID_MASK; @@ -685,7 +684,7 @@ static void ks8851_wrpkt(struct ks8851_net *ks, struct sk_buff *txp, bool irq) ret = spi_sync(ks->spidev, msg); if (ret < 0) - ks_err(ks, "%s: spi_sync() failed\n", __func__); + netdev_err(ks->netdev, "%s: spi_sync() failed\n", __func__); } /** @@ -746,8 +745,7 @@ static void ks8851_set_powermode(struct ks8851_net *ks, unsigned pwrmode) { unsigned pmecr; - if (netif_msg_hw(ks)) - ks_dbg(ks, "setting power mode %d\n", pwrmode); + netif_dbg(ks, hw, ks->netdev, "setting power mode %d\n", pwrmode); pmecr = ks8851_rdreg16(ks, KS_PMECR); pmecr &= ~PMECR_PM_MASK; @@ -771,8 +769,7 @@ static int ks8851_net_open(struct net_device *dev) * else at the moment */ mutex_lock(&ks->lock); - if (netif_msg_ifup(ks)) - ks_dbg(ks, "opening %s\n", dev->name); + netif_dbg(ks, ifup, ks->netdev, "opening\n"); /* bring chip out of any power saving mode it was in */ ks8851_set_powermode(ks, PMECR_PM_NORMAL); @@ -828,8 +825,7 @@ static int ks8851_net_open(struct net_device *dev) netif_start_queue(ks->netdev); - if (netif_msg_ifup(ks)) - ks_dbg(ks, "network device %s up\n", dev->name); + netif_dbg(ks, ifup, ks->netdev, "network device up\n"); mutex_unlock(&ks->lock); return 0; @@ -847,8 +843,7 @@ static int ks8851_net_stop(struct net_device *dev) { struct ks8851_net *ks = netdev_priv(dev); - if (netif_msg_ifdown(ks)) - ks_info(ks, "%s: shutting down\n", dev->name); + netif_info(ks, ifdown, dev, "shutting down\n"); netif_stop_queue(dev); @@ -876,8 +871,8 @@ static int ks8851_net_stop(struct net_device *dev) while (!skb_queue_empty(&ks->txq)) { struct sk_buff *txb = skb_dequeue(&ks->txq); - if (netif_msg_ifdown(ks)) - ks_dbg(ks, "%s: freeing txb %p\n", __func__, txb); + netif_dbg(ks, ifdown, ks->netdev, + "%s: freeing txb %p\n", __func__, txb); dev_kfree_skb(txb); } @@ -906,9 +901,8 @@ static netdev_tx_t ks8851_start_xmit(struct sk_buff *skb, unsigned needed = calc_txlen(skb->len); netdev_tx_t ret = NETDEV_TX_OK; - if (netif_msg_tx_queued(ks)) - ks_dbg(ks, "%s: skb %p, %d@%p\n", __func__, - skb, skb->len, skb->data); + netif_dbg(ks, tx_queued, ks->netdev, + "%s: skb %p, %d@%p\n", __func__, skb, skb->len, skb->data); spin_lock(&ks->statelock); @@ -968,13 +962,13 @@ static void ks8851_set_rx_mode(struct net_device *dev) rxctrl.rxcr1 = (RXCR1_RXME | RXCR1_RXAE | RXCR1_RXPAFMA | RXCR1_RXMAFMA); } else if (dev->flags & IFF_MULTICAST && !netdev_mc_empty(dev)) { - struct dev_mc_list *mcptr; + struct netdev_hw_addr *ha; u32 crc; /* accept some multicast */ - netdev_for_each_mc_addr(mcptr, dev) { - crc = ether_crc(ETH_ALEN, mcptr->dmi_addr); + netdev_for_each_mc_addr(ha, dev) { + crc = ether_crc(ETH_ALEN, ha->addr); crc >>= (32 - 6); /* get top six bits */ rxctrl.mchash[crc >> 4] |= (1 << (crc & 0xf)); @@ -1040,6 +1034,234 @@ static const struct net_device_ops ks8851_netdev_ops = { .ndo_validate_addr = eth_validate_addr, }; +/* Companion eeprom access */ + +enum { /* EEPROM programming states */ + EEPROM_CONTROL, + EEPROM_ADDRESS, + EEPROM_DATA, + EEPROM_COMPLETE +}; + +/** + * ks8851_eeprom_read - read a 16bits word in ks8851 companion EEPROM + * @dev: The network device the PHY is on. + * @addr: EEPROM address to read + * + * eeprom_size: used to define the data coding length. Can be changed + * through debug-fs. + * + * Programs a read on the EEPROM using ks8851 EEPROM SW access feature. + * Warning: The READ feature is not supported on ks8851 revision 0. + * + * Rough programming model: + * - on period start: set clock high and read value on bus + * - on period / 2: set clock low and program value on bus + * - start on period / 2 + */ +unsigned int ks8851_eeprom_read(struct net_device *dev, unsigned int addr) +{ + struct ks8851_net *ks = netdev_priv(dev); + int eepcr; + int ctrl = EEPROM_OP_READ; + int state = EEPROM_CONTROL; + int bit_count = EEPROM_OP_LEN - 1; + unsigned int data = 0; + int dummy; + unsigned int addr_len; + + addr_len = (ks->eeprom_size == 128) ? 6 : 8; + + /* start transaction: chip select high, authorize write */ + mutex_lock(&ks->lock); + eepcr = EEPCR_EESA | EEPCR_EESRWA; + ks8851_wrreg16(ks, KS_EEPCR, eepcr); + eepcr |= EEPCR_EECS; + ks8851_wrreg16(ks, KS_EEPCR, eepcr); + mutex_unlock(&ks->lock); + + while (state != EEPROM_COMPLETE) { + /* falling clock period starts... */ + /* set EED_IO pin for control and address */ + eepcr &= ~EEPCR_EEDO; + switch (state) { + case EEPROM_CONTROL: + eepcr |= ((ctrl >> bit_count) & 1) << 2; + if (bit_count-- <= 0) { + bit_count = addr_len - 1; + state = EEPROM_ADDRESS; + } + break; + case EEPROM_ADDRESS: + eepcr |= ((addr >> bit_count) & 1) << 2; + bit_count--; + break; + case EEPROM_DATA: + /* Change to receive mode */ + eepcr &= ~EEPCR_EESRWA; + break; + } + + /* lower clock */ + eepcr &= ~EEPCR_EESCK; + + mutex_lock(&ks->lock); + ks8851_wrreg16(ks, KS_EEPCR, eepcr); + mutex_unlock(&ks->lock); + + /* waitread period / 2 */ + udelay(EEPROM_SK_PERIOD / 2); + + /* rising clock period starts... */ + + /* raise clock */ + mutex_lock(&ks->lock); + eepcr |= EEPCR_EESCK; + ks8851_wrreg16(ks, KS_EEPCR, eepcr); + mutex_unlock(&ks->lock); + + /* Manage read */ + switch (state) { + case EEPROM_ADDRESS: + if (bit_count < 0) { + bit_count = EEPROM_DATA_LEN - 1; + state = EEPROM_DATA; + } + break; + case EEPROM_DATA: + mutex_lock(&ks->lock); + dummy = ks8851_rdreg16(ks, KS_EEPCR); + mutex_unlock(&ks->lock); + data |= ((dummy >> EEPCR_EESB_OFFSET) & 1) << bit_count; + if (bit_count-- <= 0) + state = EEPROM_COMPLETE; + break; + } + + /* wait period / 2 */ + udelay(EEPROM_SK_PERIOD / 2); + } + + /* close transaction */ + mutex_lock(&ks->lock); + eepcr &= ~EEPCR_EECS; + ks8851_wrreg16(ks, KS_EEPCR, eepcr); + eepcr = 0; + ks8851_wrreg16(ks, KS_EEPCR, eepcr); + mutex_unlock(&ks->lock); + + return data; +} + +/** + * ks8851_eeprom_write - write a 16bits word in ks8851 companion EEPROM + * @dev: The network device the PHY is on. + * @op: operand (can be WRITE, EWEN, EWDS) + * @addr: EEPROM address to write + * @data: data to write + * + * eeprom_size: used to define the data coding length. Can be changed + * through debug-fs. + * + * Programs a write on the EEPROM using ks8851 EEPROM SW access feature. + * + * Note that a write enable is required before writing data. + * + * Rough programming model: + * - on period start: set clock high + * - on period / 2: set clock low and program value on bus + * - start on period / 2 + */ +void ks8851_eeprom_write(struct net_device *dev, unsigned int op, + unsigned int addr, unsigned int data) +{ + struct ks8851_net *ks = netdev_priv(dev); + int eepcr; + int state = EEPROM_CONTROL; + int bit_count = EEPROM_OP_LEN - 1; + unsigned int addr_len; + + addr_len = (ks->eeprom_size == 128) ? 6 : 8; + + switch (op) { + case EEPROM_OP_EWEN: + addr = 0x30; + break; + case EEPROM_OP_EWDS: + addr = 0; + break; + } + + /* start transaction: chip select high, authorize write */ + mutex_lock(&ks->lock); + eepcr = EEPCR_EESA | EEPCR_EESRWA; + ks8851_wrreg16(ks, KS_EEPCR, eepcr); + eepcr |= EEPCR_EECS; + ks8851_wrreg16(ks, KS_EEPCR, eepcr); + mutex_unlock(&ks->lock); + + while (state != EEPROM_COMPLETE) { + /* falling clock period starts... */ + /* set EED_IO pin for control and address */ + eepcr &= ~EEPCR_EEDO; + switch (state) { + case EEPROM_CONTROL: + eepcr |= ((op >> bit_count) & 1) << 2; + if (bit_count-- <= 0) { + bit_count = addr_len - 1; + state = EEPROM_ADDRESS; + } + break; + case EEPROM_ADDRESS: + eepcr |= ((addr >> bit_count) & 1) << 2; + if (bit_count-- <= 0) { + if (op == EEPROM_OP_WRITE) { + bit_count = EEPROM_DATA_LEN - 1; + state = EEPROM_DATA; + } else { + state = EEPROM_COMPLETE; + } + } + break; + case EEPROM_DATA: + eepcr |= ((data >> bit_count) & 1) << 2; + if (bit_count-- <= 0) + state = EEPROM_COMPLETE; + break; + } + + /* lower clock */ + eepcr &= ~EEPCR_EESCK; + + mutex_lock(&ks->lock); + ks8851_wrreg16(ks, KS_EEPCR, eepcr); + mutex_unlock(&ks->lock); + + /* wait period / 2 */ + udelay(EEPROM_SK_PERIOD / 2); + + /* rising clock period starts... */ + + /* raise clock */ + eepcr |= EEPCR_EESCK; + mutex_lock(&ks->lock); + ks8851_wrreg16(ks, KS_EEPCR, eepcr); + mutex_unlock(&ks->lock); + + /* wait period / 2 */ + udelay(EEPROM_SK_PERIOD / 2); + } + + /* close transaction */ + mutex_lock(&ks->lock); + eepcr &= ~EEPCR_EECS; + ks8851_wrreg16(ks, KS_EEPCR, eepcr); + eepcr = 0; + ks8851_wrreg16(ks, KS_EEPCR, eepcr); + mutex_unlock(&ks->lock); + +} + /* ethtool support */ static void ks8851_get_drvinfo(struct net_device *dev, @@ -1086,6 +1308,117 @@ static int ks8851_nway_reset(struct net_device *dev) return mii_nway_restart(&ks->mii); } +static int ks8851_get_eeprom_len(struct net_device *dev) +{ + struct ks8851_net *ks = netdev_priv(dev); + return ks->eeprom_size; +} + +static int ks8851_get_eeprom(struct net_device *dev, + struct ethtool_eeprom *eeprom, u8 *bytes) +{ + struct ks8851_net *ks = netdev_priv(dev); + u16 *eeprom_buff; + int first_word; + int last_word; + int ret_val = 0; + u16 i; + + if (eeprom->len == 0) + return -EINVAL; + + if (eeprom->len > ks->eeprom_size) + return -EINVAL; + + eeprom->magic = ks8851_rdreg16(ks, KS_CIDER); + + first_word = eeprom->offset >> 1; + last_word = (eeprom->offset + eeprom->len - 1) >> 1; + + eeprom_buff = kmalloc(sizeof(u16) * + (last_word - first_word + 1), GFP_KERNEL); + if (!eeprom_buff) + return -ENOMEM; + + for (i = 0; i < last_word - first_word + 1; i++) + eeprom_buff[i] = ks8851_eeprom_read(dev, first_word + 1); + + /* Device's eeprom is little-endian, word addressable */ + for (i = 0; i < last_word - first_word + 1; i++) + le16_to_cpus(&eeprom_buff[i]); + + memcpy(bytes, (u8 *)eeprom_buff + (eeprom->offset & 1), eeprom->len); + kfree(eeprom_buff); + + return ret_val; +} + +static int ks8851_set_eeprom(struct net_device *dev, + struct ethtool_eeprom *eeprom, u8 *bytes) +{ + struct ks8851_net *ks = netdev_priv(dev); + u16 *eeprom_buff; + void *ptr; + int max_len; + int first_word; + int last_word; + int ret_val = 0; + u16 i; + + if (eeprom->len == 0) + return -EOPNOTSUPP; + + if (eeprom->len > ks->eeprom_size) + return -EINVAL; + + if (eeprom->magic != ks8851_rdreg16(ks, KS_CIDER)) + return -EFAULT; + + first_word = eeprom->offset >> 1; + last_word = (eeprom->offset + eeprom->len - 1) >> 1; + max_len = (last_word - first_word + 1) * 2; + eeprom_buff = kmalloc(max_len, GFP_KERNEL); + if (!eeprom_buff) + return -ENOMEM; + + ptr = (void *)eeprom_buff; + + if (eeprom->offset & 1) { + /* need read/modify/write of first changed EEPROM word */ + /* only the second byte of the word is being modified */ + eeprom_buff[0] = ks8851_eeprom_read(dev, first_word); + ptr++; + } + if ((eeprom->offset + eeprom->len) & 1) + /* need read/modify/write of last changed EEPROM word */ + /* only the first byte of the word is being modified */ + eeprom_buff[last_word - first_word] = + ks8851_eeprom_read(dev, last_word); + + + /* Device's eeprom is little-endian, word addressable */ + le16_to_cpus(&eeprom_buff[0]); + le16_to_cpus(&eeprom_buff[last_word - first_word]); + + memcpy(ptr, bytes, eeprom->len); + + for (i = 0; i < last_word - first_word + 1; i++) + eeprom_buff[i] = cpu_to_le16(eeprom_buff[i]); + + ks8851_eeprom_write(dev, EEPROM_OP_EWEN, 0, 0); + + for (i = 0; i < last_word - first_word + 1; i++) { + ks8851_eeprom_write(dev, EEPROM_OP_WRITE, first_word + i, + eeprom_buff[i]); + mdelay(EEPROM_WRITE_TIME); + } + + ks8851_eeprom_write(dev, EEPROM_OP_EWDS, 0, 0); + + kfree(eeprom_buff); + return ret_val; +} + static const struct ethtool_ops ks8851_ethtool_ops = { .get_drvinfo = ks8851_get_drvinfo, .get_msglevel = ks8851_get_msglevel, @@ -1094,6 +1427,9 @@ static const struct ethtool_ops ks8851_ethtool_ops = { .set_settings = ks8851_set_settings, .get_link = ks8851_get_link, .nway_reset = ks8851_nway_reset, + .get_eeprom_len = ks8851_get_eeprom_len, + .get_eeprom = ks8851_get_eeprom, + .set_eeprom = ks8851_set_eeprom, }; /* MII interface controls */ @@ -1187,17 +1523,17 @@ static int ks8851_read_selftest(struct ks8851_net *ks) rd = ks8851_rdreg16(ks, KS_MBIR); if ((rd & both_done) != both_done) { - ks_warn(ks, "Memory selftest not finished\n"); + netdev_warn(ks->netdev, "Memory selftest not finished\n"); return 0; } if (rd & MBIR_TXMBFA) { - ks_err(ks, "TX memory selftest fail\n"); + netdev_err(ks->netdev, "TX memory selftest fail\n"); ret |= 1; } if (rd & MBIR_RXMBFA) { - ks_err(ks, "RX memory selftest fail\n"); + netdev_err(ks->netdev, "RX memory selftest fail\n"); ret |= 2; } @@ -1279,6 +1615,14 @@ static int __devinit ks8851_probe(struct spi_device *spi) goto err_id; } + /* cache the contents of the CCR register for EEPROM, etc. */ + ks->rc_ccr = ks8851_rdreg16(ks, KS_CCR); + + if (ks->rc_ccr & CCR_EEPROM) + ks->eeprom_size = 128; + else + ks->eeprom_size = 0; + ks8851_read_selftest(ks); ks8851_init_mac(ks); @@ -1295,9 +1639,9 @@ static int __devinit ks8851_probe(struct spi_device *spi) goto err_netdev; } - dev_info(&spi->dev, "revision %d, MAC %pM, IRQ %d\n", - CIDER_REV_GET(ks8851_rdreg16(ks, KS_CIDER)), - ndev->dev_addr, ndev->irq); + netdev_info(ndev, "revision %d, MAC %pM, IRQ %d\n", + CIDER_REV_GET(ks8851_rdreg16(ks, KS_CIDER)), + ndev->dev_addr, ndev->irq); return 0; @@ -1316,7 +1660,7 @@ static int __devexit ks8851_remove(struct spi_device *spi) struct ks8851_net *priv = dev_get_drvdata(&spi->dev); if (netif_msg_drv(priv)) - dev_info(&spi->dev, "remove"); + dev_info(&spi->dev, "remove\n"); unregister_netdev(priv->netdev); free_irq(spi->irq, priv); |