summaryrefslogtreecommitdiffstats
path: root/drivers/net/phy
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/phy')
-rw-r--r--drivers/net/phy/Kconfig36
-rw-r--r--drivers/net/phy/Makefile7
-rw-r--r--drivers/net/phy/fixed_phy.c153
-rw-r--r--drivers/net/phy/intel-xway.c376
-rw-r--r--drivers/net/phy/marvell.c346
-rw-r--r--drivers/net/phy/mdio-hisi-femac.c166
-rw-r--r--drivers/net/phy/mdio-mux-bcm-iproc.c248
-rw-r--r--drivers/net/phy/mdio-mux-gpio.c2
-rw-r--r--drivers/net/phy/mdio-mux-mmioreg.c2
-rw-r--r--drivers/net/phy/mdio-mux.c26
-rw-r--r--drivers/net/phy/mdio-xgene.c477
-rw-r--r--drivers/net/phy/mdio-xgene.h143
-rw-r--r--drivers/net/phy/micrel.c34
-rw-r--r--drivers/net/phy/swphy.c179
-rw-r--r--drivers/net/phy/swphy.h9
15 files changed, 2047 insertions, 157 deletions
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 6dad9a9c356c..47a64342cc16 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -12,6 +12,9 @@ menuconfig PHYLIB
if PHYLIB
+config SWPHY
+ bool
+
comment "MII PHY device drivers"
config AQUANTIA_PHY
@@ -159,6 +162,7 @@ config MICROCHIP_PHY
config FIXED_PHY
tristate "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
depends on PHYLIB
+ select SWPHY
---help---
Adds the platform "fixed" MDIO Bus to cover the boards that use
PHYs that are not connected to the real MDIO bus.
@@ -254,6 +258,17 @@ config MDIO_BUS_MUX_MMIOREG
Currently, only 8-bit registers are supported.
+config MDIO_BUS_MUX_BCM_IPROC
+ tristate "Support for iProc based MDIO bus multiplexers"
+ depends on OF && OF_MDIO && (ARCH_BCM_IPROC || COMPILE_TEST)
+ select MDIO_BUS_MUX
+ default ARCH_BCM_IPROC
+ help
+ This module provides a driver for MDIO bus multiplexers found in
+ iProc based Broadcom SoCs. This multiplexer connects one of several
+ child MDIO bus to a parent bus. Buses could be internal as well as
+ external and selection logic lies inside the same multiplexer.
+
config MDIO_BCM_UNIMAC
tristate "Broadcom UniMAC MDIO bus controller"
depends on HAS_IOMEM
@@ -271,6 +286,27 @@ config MDIO_BCM_IPROC
This module provides a driver for the MDIO busses found in the
Broadcom iProc SoC's.
+config INTEL_XWAY_PHY
+ tristate "Driver for Intel XWAY PHYs"
+ ---help---
+ Supports the Intel XWAY (former Lantiq) 11G and 22E PHYs.
+ These PHYs are marked as standalone chips under the names
+ PEF 7061, PEF 7071 and PEF 7072 or integrated into the Intel
+ SoCs xRX200, xRX300, xRX330, xRX350 and xRX550.
+
+config MDIO_HISI_FEMAC
+ tristate "Hisilicon FEMAC MDIO bus controller"
+ depends on HAS_IOMEM && OF_MDIO
+ help
+ This module provides a driver for the MDIO busses found in the
+ Hisilicon SoC that have an Fast Ethernet MAC.
+
+config MDIO_XGENE
+ tristate "APM X-Gene SoC MDIO bus controller"
+ help
+ This module provides a driver for the MDIO busses found in the
+ APM X-Gene SoC's.
+
endif # PHYLIB
config MICREL_KS8995MA
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index fcdbb9299fab..534dfa74d5a2 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -1,6 +1,7 @@
# Makefile for Linux PHY drivers
-libphy-objs := phy.o phy_device.o mdio_bus.o mdio_device.o
+libphy-y := phy.o phy_device.o mdio_bus.o mdio_device.o
+libphy-$(CONFIG_SWPHY) += swphy.o
obj-$(CONFIG_PHYLIB) += libphy.o
obj-$(CONFIG_AQUANTIA_PHY) += aquantia.o
@@ -39,8 +40,12 @@ obj-$(CONFIG_AMD_PHY) += amd.o
obj-$(CONFIG_MDIO_BUS_MUX) += mdio-mux.o
obj-$(CONFIG_MDIO_BUS_MUX_GPIO) += mdio-mux-gpio.o
obj-$(CONFIG_MDIO_BUS_MUX_MMIOREG) += mdio-mux-mmioreg.o
+obj-$(CONFIG_MDIO_BUS_MUX_BCM_IPROC) += mdio-mux-bcm-iproc.o
obj-$(CONFIG_MDIO_SUN4I) += mdio-sun4i.o
obj-$(CONFIG_MDIO_MOXART) += mdio-moxart.o
obj-$(CONFIG_MDIO_BCM_UNIMAC) += mdio-bcm-unimac.o
obj-$(CONFIG_MICROCHIP_PHY) += microchip.o
obj-$(CONFIG_MDIO_BCM_IPROC) += mdio-bcm-iproc.o
+obj-$(CONFIG_INTEL_XWAY_PHY) += intel-xway.o
+obj-$(CONFIG_MDIO_HISI_FEMAC) += mdio-hisi-femac.o
+obj-$(CONFIG_MDIO_XGENE) += mdio-xgene.o
diff --git a/drivers/net/phy/fixed_phy.c b/drivers/net/phy/fixed_phy.c
index 9ec7f7353434..c649c101bbab 100644
--- a/drivers/net/phy/fixed_phy.c
+++ b/drivers/net/phy/fixed_phy.c
@@ -23,9 +23,10 @@
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/gpio.h>
+#include <linux/seqlock.h>
#include <linux/idr.h>
-#define MII_REGS_NUM 29
+#include "swphy.h"
struct fixed_mdio_bus {
struct mii_bus *mii_bus;
@@ -34,8 +35,8 @@ struct fixed_mdio_bus {
struct fixed_phy {
int addr;
- u16 regs[MII_REGS_NUM];
struct phy_device *phydev;
+ seqcount_t seqcount;
struct fixed_phy_status status;
int (*link_update)(struct net_device *, struct fixed_phy_status *);
struct list_head node;
@@ -47,103 +48,10 @@ static struct fixed_mdio_bus platform_fmb = {
.phys = LIST_HEAD_INIT(platform_fmb.phys),
};
-static int fixed_phy_update_regs(struct fixed_phy *fp)
+static void fixed_phy_update(struct fixed_phy *fp)
{
- u16 bmsr = BMSR_ANEGCAPABLE;
- u16 bmcr = 0;
- u16 lpagb = 0;
- u16 lpa = 0;
-
if (gpio_is_valid(fp->link_gpio))
fp->status.link = !!gpio_get_value_cansleep(fp->link_gpio);
-
- if (fp->status.duplex) {
- switch (fp->status.speed) {
- case 1000:
- bmsr |= BMSR_ESTATEN;
- break;
- case 100:
- bmsr |= BMSR_100FULL;
- break;
- case 10:
- bmsr |= BMSR_10FULL;
- break;
- default:
- break;
- }
- } else {
- switch (fp->status.speed) {
- case 1000:
- bmsr |= BMSR_ESTATEN;
- break;
- case 100:
- bmsr |= BMSR_100HALF;
- break;
- case 10:
- bmsr |= BMSR_10HALF;
- break;
- default:
- break;
- }
- }
-
- if (fp->status.link) {
- bmsr |= BMSR_LSTATUS | BMSR_ANEGCOMPLETE;
-
- if (fp->status.duplex) {
- bmcr |= BMCR_FULLDPLX;
-
- switch (fp->status.speed) {
- case 1000:
- bmcr |= BMCR_SPEED1000;
- lpagb |= LPA_1000FULL;
- break;
- case 100:
- bmcr |= BMCR_SPEED100;
- lpa |= LPA_100FULL;
- break;
- case 10:
- lpa |= LPA_10FULL;
- break;
- default:
- pr_warn("fixed phy: unknown speed\n");
- return -EINVAL;
- }
- } else {
- switch (fp->status.speed) {
- case 1000:
- bmcr |= BMCR_SPEED1000;
- lpagb |= LPA_1000HALF;
- break;
- case 100:
- bmcr |= BMCR_SPEED100;
- lpa |= LPA_100HALF;
- break;
- case 10:
- lpa |= LPA_10HALF;
- break;
- default:
- pr_warn("fixed phy: unknown speed\n");
- return -EINVAL;
- }
- }
-
- if (fp->status.pause)
- lpa |= LPA_PAUSE_CAP;
-
- if (fp->status.asym_pause)
- lpa |= LPA_PAUSE_ASYM;
- }
-
- fp->regs[MII_PHYSID1] = 0;
- fp->regs[MII_PHYSID2] = 0;
-
- fp->regs[MII_BMSR] = bmsr;
- fp->regs[MII_BMCR] = bmcr;
- fp->regs[MII_LPA] = lpa;
- fp->regs[MII_STAT1000] = lpagb;
-
- return 0;
}
static int fixed_mdio_read(struct mii_bus *bus, int phy_addr, int reg_num)
@@ -151,29 +59,23 @@ static int fixed_mdio_read(struct mii_bus *bus, int phy_addr, int reg_num)
struct fixed_mdio_bus *fmb = bus->priv;
struct fixed_phy *fp;
- if (reg_num >= MII_REGS_NUM)
- return -1;
-
- /* We do not support emulating Clause 45 over Clause 22 register reads
- * return an error instead of bogus data.
- */
- switch (reg_num) {
- case MII_MMD_CTRL:
- case MII_MMD_DATA:
- return -1;
- default:
- break;
- }
-
list_for_each_entry(fp, &fmb->phys, node) {
if (fp->addr == phy_addr) {
- /* Issue callback if user registered it. */
- if (fp->link_update) {
- fp->link_update(fp->phydev->attached_dev,
- &fp->status);
- fixed_phy_update_regs(fp);
- }
- return fp->regs[reg_num];
+ struct fixed_phy_status state;
+ int s;
+
+ do {
+ s = read_seqcount_begin(&fp->seqcount);
+ /* Issue callback if user registered it. */
+ if (fp->link_update) {
+ fp->link_update(fp->phydev->attached_dev,
+ &fp->status);
+ fixed_phy_update(fp);
+ }
+ state = fp->status;
+ } while (read_seqcount_retry(&fp->seqcount, s));
+
+ return swphy_read_reg(reg_num, &state);
}
}
@@ -225,6 +127,7 @@ int fixed_phy_update_state(struct phy_device *phydev,
list_for_each_entry(fp, &fmb->phys, node) {
if (fp->addr == phydev->mdio.addr) {
+ write_seqcount_begin(&fp->seqcount);
#define _UPD(x) if (changed->x) \
fp->status.x = status->x
_UPD(link);
@@ -233,7 +136,8 @@ int fixed_phy_update_state(struct phy_device *phydev,
_UPD(pause);
_UPD(asym_pause);
#undef _UPD
- fixed_phy_update_regs(fp);
+ fixed_phy_update(fp);
+ write_seqcount_end(&fp->seqcount);
return 0;
}
}
@@ -250,11 +154,15 @@ int fixed_phy_add(unsigned int irq, int phy_addr,
struct fixed_mdio_bus *fmb = &platform_fmb;
struct fixed_phy *fp;
+ ret = swphy_validate_state(status);
+ if (ret < 0)
+ return ret;
+
fp = kzalloc(sizeof(*fp), GFP_KERNEL);
if (!fp)
return -ENOMEM;
- memset(fp->regs, 0xFF, sizeof(fp->regs[0]) * MII_REGS_NUM);
+ seqcount_init(&fp->seqcount);
if (irq != PHY_POLL)
fmb->mii_bus->irq[phy_addr] = irq;
@@ -270,17 +178,12 @@ int fixed_phy_add(unsigned int irq, int phy_addr,
goto err_regs;
}
- ret = fixed_phy_update_regs(fp);
- if (ret)
- goto err_gpio;
+ fixed_phy_update(fp);
list_add_tail(&fp->node, &fmb->phys);
return 0;
-err_gpio:
- if (gpio_is_valid(fp->link_gpio))
- gpio_free(fp->link_gpio);
err_regs:
kfree(fp);
return ret;
diff --git a/drivers/net/phy/intel-xway.c b/drivers/net/phy/intel-xway.c
new file mode 100644
index 000000000000..c300ab5587b8
--- /dev/null
+++ b/drivers/net/phy/intel-xway.c
@@ -0,0 +1,376 @@
+/*
+ * Copyright (C) 2012 Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
+ * Copyright (C) 2016 Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/mdio.h>
+#include <linux/module.h>
+#include <linux/phy.h>
+#include <linux/of.h>
+
+#define XWAY_MDIO_IMASK 0x19 /* interrupt mask */
+#define XWAY_MDIO_ISTAT 0x1A /* interrupt status */
+
+#define XWAY_MDIO_INIT_WOL BIT(15) /* Wake-On-LAN */
+#define XWAY_MDIO_INIT_MSRE BIT(14)
+#define XWAY_MDIO_INIT_NPRX BIT(13)
+#define XWAY_MDIO_INIT_NPTX BIT(12)
+#define XWAY_MDIO_INIT_ANE BIT(11) /* Auto-Neg error */
+#define XWAY_MDIO_INIT_ANC BIT(10) /* Auto-Neg complete */
+#define XWAY_MDIO_INIT_ADSC BIT(5) /* Link auto-downspeed detect */
+#define XWAY_MDIO_INIT_MPIPC BIT(4)
+#define XWAY_MDIO_INIT_MDIXC BIT(3)
+#define XWAY_MDIO_INIT_DXMC BIT(2) /* Duplex mode change */
+#define XWAY_MDIO_INIT_LSPC BIT(1) /* Link speed change */
+#define XWAY_MDIO_INIT_LSTC BIT(0) /* Link state change */
+#define XWAY_MDIO_INIT_MASK (XWAY_MDIO_INIT_LSTC | \
+ XWAY_MDIO_INIT_ADSC)
+
+#define ADVERTISED_MPD BIT(10) /* Multi-port device */
+
+/* LED Configuration */
+#define XWAY_MMD_LEDCH 0x01E0
+/* Inverse of SCAN Function */
+#define XWAY_MMD_LEDCH_NACS_NONE 0x0000
+#define XWAY_MMD_LEDCH_NACS_LINK 0x0001
+#define XWAY_MMD_LEDCH_NACS_PDOWN 0x0002
+#define XWAY_MMD_LEDCH_NACS_EEE 0x0003
+#define XWAY_MMD_LEDCH_NACS_ANEG 0x0004
+#define XWAY_MMD_LEDCH_NACS_ABIST 0x0005
+#define XWAY_MMD_LEDCH_NACS_CDIAG 0x0006
+#define XWAY_MMD_LEDCH_NACS_TEST 0x0007
+/* Slow Blink Frequency */
+#define XWAY_MMD_LEDCH_SBF_F02HZ 0x0000
+#define XWAY_MMD_LEDCH_SBF_F04HZ 0x0010
+#define XWAY_MMD_LEDCH_SBF_F08HZ 0x0020
+#define XWAY_MMD_LEDCH_SBF_F16HZ 0x0030
+/* Fast Blink Frequency */
+#define XWAY_MMD_LEDCH_FBF_F02HZ 0x0000
+#define XWAY_MMD_LEDCH_FBF_F04HZ 0x0040
+#define XWAY_MMD_LEDCH_FBF_F08HZ 0x0080
+#define XWAY_MMD_LEDCH_FBF_F16HZ 0x00C0
+/* LED Configuration */
+#define XWAY_MMD_LEDCL 0x01E1
+/* Complex Blinking Configuration */
+#define XWAY_MMD_LEDCH_CBLINK_NONE 0x0000
+#define XWAY_MMD_LEDCH_CBLINK_LINK 0x0001
+#define XWAY_MMD_LEDCH_CBLINK_PDOWN 0x0002
+#define XWAY_MMD_LEDCH_CBLINK_EEE 0x0003
+#define XWAY_MMD_LEDCH_CBLINK_ANEG 0x0004
+#define XWAY_MMD_LEDCH_CBLINK_ABIST 0x0005
+#define XWAY_MMD_LEDCH_CBLINK_CDIAG 0x0006
+#define XWAY_MMD_LEDCH_CBLINK_TEST 0x0007
+/* Complex SCAN Configuration */
+#define XWAY_MMD_LEDCH_SCAN_NONE 0x0000
+#define XWAY_MMD_LEDCH_SCAN_LINK 0x0010
+#define XWAY_MMD_LEDCH_SCAN_PDOWN 0x0020
+#define XWAY_MMD_LEDCH_SCAN_EEE 0x0030
+#define XWAY_MMD_LEDCH_SCAN_ANEG 0x0040
+#define XWAY_MMD_LEDCH_SCAN_ABIST 0x0050
+#define XWAY_MMD_LEDCH_SCAN_CDIAG 0x0060
+#define XWAY_MMD_LEDCH_SCAN_TEST 0x0070
+/* Configuration for LED Pin x */
+#define XWAY_MMD_LED0H 0x01E2
+/* Fast Blinking Configuration */
+#define XWAY_MMD_LEDxH_BLINKF_MASK 0x000F
+#define XWAY_MMD_LEDxH_BLINKF_NONE 0x0000
+#define XWAY_MMD_LEDxH_BLINKF_LINK10 0x0001
+#define XWAY_MMD_LEDxH_BLINKF_LINK100 0x0002
+#define XWAY_MMD_LEDxH_BLINKF_LINK10X 0x0003
+#define XWAY_MMD_LEDxH_BLINKF_LINK1000 0x0004
+#define XWAY_MMD_LEDxH_BLINKF_LINK10_0 0x0005
+#define XWAY_MMD_LEDxH_BLINKF_LINK100X 0x0006
+#define XWAY_MMD_LEDxH_BLINKF_LINK10XX 0x0007
+#define XWAY_MMD_LEDxH_BLINKF_PDOWN 0x0008
+#define XWAY_MMD_LEDxH_BLINKF_EEE 0x0009
+#define XWAY_MMD_LEDxH_BLINKF_ANEG 0x000A
+#define XWAY_MMD_LEDxH_BLINKF_ABIST 0x000B
+#define XWAY_MMD_LEDxH_BLINKF_CDIAG 0x000C
+/* Constant On Configuration */
+#define XWAY_MMD_LEDxH_CON_MASK 0x00F0
+#define XWAY_MMD_LEDxH_CON_NONE 0x0000
+#define XWAY_MMD_LEDxH_CON_LINK10 0x0010
+#define XWAY_MMD_LEDxH_CON_LINK100 0x0020
+#define XWAY_MMD_LEDxH_CON_LINK10X 0x0030
+#define XWAY_MMD_LEDxH_CON_LINK1000 0x0040
+#define XWAY_MMD_LEDxH_CON_LINK10_0 0x0050
+#define XWAY_MMD_LEDxH_CON_LINK100X 0x0060
+#define XWAY_MMD_LEDxH_CON_LINK10XX 0x0070
+#define XWAY_MMD_LEDxH_CON_PDOWN 0x0080
+#define XWAY_MMD_LEDxH_CON_EEE 0x0090
+#define XWAY_MMD_LEDxH_CON_ANEG 0x00A0
+#define XWAY_MMD_LEDxH_CON_ABIST 0x00B0
+#define XWAY_MMD_LEDxH_CON_CDIAG 0x00C0
+#define XWAY_MMD_LEDxH_CON_COPPER 0x00D0
+#define XWAY_MMD_LEDxH_CON_FIBER 0x00E0
+/* Configuration for LED Pin x */
+#define XWAY_MMD_LED0L 0x01E3
+/* Pulsing Configuration */
+#define XWAY_MMD_LEDxL_PULSE_MASK 0x000F
+#define XWAY_MMD_LEDxL_PULSE_NONE 0x0000
+#define XWAY_MMD_LEDxL_PULSE_TXACT 0x0001
+#define XWAY_MMD_LEDxL_PULSE_RXACT 0x0002
+#define XWAY_MMD_LEDxL_PULSE_COL 0x0004
+/* Slow Blinking Configuration */
+#define XWAY_MMD_LEDxL_BLINKS_MASK 0x00F0
+#define XWAY_MMD_LEDxL_BLINKS_NONE 0x0000
+#define XWAY_MMD_LEDxL_BLINKS_LINK10 0x0010
+#define XWAY_MMD_LEDxL_BLINKS_LINK100 0x0020
+#define XWAY_MMD_LEDxL_BLINKS_LINK10X 0x0030
+#define XWAY_MMD_LEDxL_BLINKS_LINK1000 0x0040
+#define XWAY_MMD_LEDxL_BLINKS_LINK10_0 0x0050
+#define XWAY_MMD_LEDxL_BLINKS_LINK100X 0x0060
+#define XWAY_MMD_LEDxL_BLINKS_LINK10XX 0x0070
+#define XWAY_MMD_LEDxL_BLINKS_PDOWN 0x0080
+#define XWAY_MMD_LEDxL_BLINKS_EEE 0x0090
+#define XWAY_MMD_LEDxL_BLINKS_ANEG 0x00A0
+#define XWAY_MMD_LEDxL_BLINKS_ABIST 0x00B0
+#define XWAY_MMD_LEDxL_BLINKS_CDIAG 0x00C0
+#define XWAY_MMD_LED1H 0x01E4
+#define XWAY_MMD_LED1L 0x01E5
+#define XWAY_MMD_LED2H 0x01E6
+#define XWAY_MMD_LED2L 0x01E7
+#define XWAY_MMD_LED3H 0x01E8
+#define XWAY_MMD_LED3L 0x01E9
+
+#define PHY_ID_PHY11G_1_3 0x030260D1
+#define PHY_ID_PHY22F_1_3 0x030260E1
+#define PHY_ID_PHY11G_1_4 0xD565A400
+#define PHY_ID_PHY22F_1_4 0xD565A410
+#define PHY_ID_PHY11G_1_5 0xD565A401
+#define PHY_ID_PHY22F_1_5 0xD565A411
+#define PHY_ID_PHY11G_VR9 0xD565A409
+#define PHY_ID_PHY22F_VR9 0xD565A419
+
+static int xway_gphy_config_init(struct phy_device *phydev)
+{
+ int err;
+ u32 ledxh;
+ u32 ledxl;
+
+ /* Mask all interrupts */
+ err = phy_write(phydev, XWAY_MDIO_IMASK, 0);
+ if (err)
+ return err;
+
+ /* Clear all pending interrupts */
+ phy_read(phydev, XWAY_MDIO_ISTAT);
+
+ phy_write_mmd_indirect(phydev, XWAY_MMD_LEDCH, MDIO_MMD_VEND2,
+ XWAY_MMD_LEDCH_NACS_NONE |
+ XWAY_MMD_LEDCH_SBF_F02HZ |
+ XWAY_MMD_LEDCH_FBF_F16HZ);
+ phy_write_mmd_indirect(phydev, XWAY_MMD_LEDCL, MDIO_MMD_VEND2,
+ XWAY_MMD_LEDCH_CBLINK_NONE |
+ XWAY_MMD_LEDCH_SCAN_NONE);
+
+ /**
+ * In most cases only one LED is connected to this phy, so
+ * configure them all to constant on and pulse mode. LED3 is
+ * only available in some packages, leave it in its reset
+ * configuration.
+ */
+ ledxh = XWAY_MMD_LEDxH_BLINKF_NONE | XWAY_MMD_LEDxH_CON_LINK10XX;
+ ledxl = XWAY_MMD_LEDxL_PULSE_TXACT | XWAY_MMD_LEDxL_PULSE_RXACT |
+ XWAY_MMD_LEDxL_BLINKS_NONE;
+ phy_write_mmd_indirect(phydev, XWAY_MMD_LED0H, MDIO_MMD_VEND2, ledxh);
+ phy_write_mmd_indirect(phydev, XWAY_MMD_LED0L, MDIO_MMD_VEND2, ledxl);
+ phy_write_mmd_indirect(phydev, XWAY_MMD_LED1H, MDIO_MMD_VEND2, ledxh);
+ phy_write_mmd_indirect(phydev, XWAY_MMD_LED1L, MDIO_MMD_VEND2, ledxl);
+ phy_write_mmd_indirect(phydev, XWAY_MMD_LED2H, MDIO_MMD_VEND2, ledxh);
+ phy_write_mmd_indirect(phydev, XWAY_MMD_LED2L, MDIO_MMD_VEND2, ledxl);
+
+ return 0;
+}
+
+static int xway_gphy14_config_aneg(struct phy_device *phydev)
+{
+ int reg, err;
+
+ /* Advertise as multi-port device, see IEEE802.3-2002 40.5.1.1 */
+ /* This is a workaround for an errata in rev < 1.5 devices */
+ reg = phy_read(phydev, MII_CTRL1000);
+ reg |= ADVERTISED_MPD;
+ err = phy_write(phydev, MII_CTRL1000, reg);
+ if (err)
+ return err;
+
+ return genphy_config_aneg(phydev);
+}
+
+static int xway_gphy_ack_interrupt(struct phy_device *phydev)
+{
+ int reg;
+
+ reg = phy_read(phydev, XWAY_MDIO_ISTAT);
+ return (reg < 0) ? reg : 0;
+}
+
+static int xway_gphy_did_interrupt(struct phy_device *phydev)
+{
+ int reg;
+
+ reg = phy_read(phydev, XWAY_MDIO_ISTAT);
+ return reg & XWAY_MDIO_INIT_MASK;
+}
+
+static int xway_gphy_config_intr(struct phy_device *phydev)
+{
+ u16 mask = 0;
+
+ if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
+ mask = XWAY_MDIO_INIT_MASK;
+
+ return phy_write(phydev, XWAY_MDIO_IMASK, mask);
+}
+
+static struct phy_driver xway_gphy[] = {
+ {
+ .phy_id = PHY_ID_PHY11G_1_3,
+ .phy_id_mask = 0xffffffff,
+ .name = "Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.3",
+ .features = (PHY_GBIT_FEATURES | SUPPORTED_Pause |
+ SUPPORTED_Asym_Pause),
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = xway_gphy_config_init,
+ .config_aneg = xway_gphy14_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = xway_gphy_ack_interrupt,
+ .did_interrupt = xway_gphy_did_interrupt,
+ .config_intr = xway_gphy_config_intr,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ }, {
+ .phy_id = PHY_ID_PHY22F_1_3,
+ .phy_id_mask = 0xffffffff,
+ .name = "Intel XWAY PHY22F (PEF 7061) v1.3",
+ .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause |
+ SUPPORTED_Asym_Pause),
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = xway_gphy_config_init,
+ .config_aneg = xway_gphy14_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = xway_gphy_ack_interrupt,
+ .did_interrupt = xway_gphy_did_interrupt,
+ .config_intr = xway_gphy_config_intr,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ }, {
+ .phy_id = PHY_ID_PHY11G_1_4,
+ .phy_id_mask = 0xffffffff,
+ .name = "Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.4",
+ .features = (PHY_GBIT_FEATURES | SUPPORTED_Pause |
+ SUPPORTED_Asym_Pause),
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = xway_gphy_config_init,
+ .config_aneg = xway_gphy14_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = xway_gphy_ack_interrupt,
+ .did_interrupt = xway_gphy_did_interrupt,
+ .config_intr = xway_gphy_config_intr,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ }, {
+ .phy_id = PHY_ID_PHY22F_1_4,
+ .phy_id_mask = 0xffffffff,
+ .name = "Intel XWAY PHY22F (PEF 7061) v1.4",
+ .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause |
+ SUPPORTED_Asym_Pause),
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = xway_gphy_config_init,
+ .config_aneg = xway_gphy14_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = xway_gphy_ack_interrupt,
+ .did_interrupt = xway_gphy_did_interrupt,
+ .config_intr = xway_gphy_config_intr,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ }, {
+ .phy_id = PHY_ID_PHY11G_1_5,
+ .phy_id_mask = 0xffffffff,
+ .name = "Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.5 / v1.6",
+ .features = (PHY_GBIT_FEATURES | SUPPORTED_Pause |
+ SUPPORTED_Asym_Pause),
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = xway_gphy_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = xway_gphy_ack_interrupt,
+ .did_interrupt = xway_gphy_did_interrupt,
+ .config_intr = xway_gphy_config_intr,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ }, {
+ .phy_id = PHY_ID_PHY22F_1_5,
+ .phy_id_mask = 0xffffffff,
+ .name = "Intel XWAY PHY22F (PEF 7061) v1.5 / v1.6",
+ .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause |
+ SUPPORTED_Asym_Pause),
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = xway_gphy_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = xway_gphy_ack_interrupt,
+ .did_interrupt = xway_gphy_did_interrupt,
+ .config_intr = xway_gphy_config_intr,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ }, {
+ .phy_id = PHY_ID_PHY11G_VR9,
+ .phy_id_mask = 0xffffffff,
+ .name = "Intel XWAY PHY11G (xRX integrated)",
+ .features = (PHY_GBIT_FEATURES | SUPPORTED_Pause |
+ SUPPORTED_Asym_Pause),
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = xway_gphy_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = xway_gphy_ack_interrupt,
+ .did_interrupt = xway_gphy_did_interrupt,
+ .config_intr = xway_gphy_config_intr,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ }, {
+ .phy_id = PHY_ID_PHY22F_VR9,
+ .phy_id_mask = 0xffffffff,
+ .name = "Intel XWAY PHY22F (xRX integrated)",
+ .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause |
+ SUPPORTED_Asym_Pause),
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = xway_gphy_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = xway_gphy_ack_interrupt,
+ .did_interrupt = xway_gphy_did_interrupt,
+ .config_intr = xway_gphy_config_intr,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ },
+};
+module_phy_driver(xway_gphy);
+
+static struct mdio_device_id __maybe_unused xway_gphy_tbl[] = {
+ { PHY_ID_PHY11G_1_3, 0xffffffff },
+ { PHY_ID_PHY22F_1_3, 0xffffffff },
+ { PHY_ID_PHY11G_1_4, 0xffffffff },
+ { PHY_ID_PHY22F_1_4, 0xffffffff },
+ { PHY_ID_PHY11G_1_5, 0xffffffff },
+ { PHY_ID_PHY22F_1_5, 0xffffffff },
+ { PHY_ID_PHY11G_VR9, 0xffffffff },
+ { PHY_ID_PHY22F_VR9, 0xffffffff },
+ { }
+};
+MODULE_DEVICE_TABLE(mdio, xway_gphy_tbl);
+
+MODULE_DESCRIPTION("Intel XWAY PHY driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index ec2c1eee6405..c2dcf02df202 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -138,6 +138,21 @@
#define MII_88E1510_GEN_CTRL_REG_1_MODE_SGMII 0x1 /* SGMII to copper */
#define MII_88E1510_GEN_CTRL_REG_1_RESET 0x8000 /* Soft reset */
+#define LPA_FIBER_1000HALF 0x40
+#define LPA_FIBER_1000FULL 0x20
+
+#define LPA_PAUSE_FIBER 0x180
+#define LPA_PAUSE_ASYM_FIBER 0x100
+
+#define ADVERTISE_FIBER_1000HALF 0x40
+#define ADVERTISE_FIBER_1000FULL 0x20
+
+#define ADVERTISE_PAUSE_FIBER 0x180
+#define ADVERTISE_PAUSE_ASYM_FIBER 0x100
+
+#define REGISTER_LINK_STATUS 0x400
+#define NB_FIBER_STATS 1
+
MODULE_DESCRIPTION("Marvell PHY driver");
MODULE_AUTHOR("Andy Fleming");
MODULE_LICENSE("GPL");
@@ -150,8 +165,9 @@ struct marvell_hw_stat {
};
static struct marvell_hw_stat marvell_hw_stats[] = {
- { "phy_receive_errors", 0, 21, 16},
+ { "phy_receive_errors_copper", 0, 21, 16},
{ "phy_idle_errors", 0, 10, 8 },
+ { "phy_receive_errors_fiber", 1, 21, 16},
};
struct marvell_priv {
@@ -477,15 +493,122 @@ static int m88e1318_config_aneg(struct phy_device *phydev)
return m88e1121_config_aneg(phydev);
}
+/**
+ * ethtool_adv_to_fiber_adv_t
+ * @ethadv: the ethtool advertisement settings
+ *
+ * A small helper function that translates ethtool advertisement
+ * settings to phy autonegotiation advertisements for the
+ * MII_ADV register for fiber link.
+ */
+static inline u32 ethtool_adv_to_fiber_adv_t(u32 ethadv)
+{
+ u32 result = 0;
+
+ if (ethadv & ADVERTISED_1000baseT_Half)
+ result |= ADVERTISE_FIBER_1000HALF;
+ if (ethadv & ADVERTISED_1000baseT_Full)
+ result |= ADVERTISE_FIBER_1000FULL;
+
+ if ((ethadv & ADVERTISE_PAUSE_ASYM) && (ethadv & ADVERTISE_PAUSE_CAP))
+ result |= LPA_PAUSE_ASYM_FIBER;
+ else if (ethadv & ADVERTISE_PAUSE_CAP)
+ result |= (ADVERTISE_PAUSE_FIBER
+ & (~ADVERTISE_PAUSE_ASYM_FIBER));
+
+ return result;
+}
+
+/**
+ * marvell_config_aneg_fiber - restart auto-negotiation or write BMCR
+ * @phydev: target phy_device struct
+ *
+ * Description: If auto-negotiation is enabled, we configure the
+ * advertising, and then restart auto-negotiation. If it is not
+ * enabled, then we write the BMCR. Adapted for fiber link in
+ * some Marvell's devices.
+ */
+static int marvell_config_aneg_fiber(struct phy_device *phydev)
+{
+ int changed = 0;
+ int err;
+ int adv, oldadv;
+ u32 advertise;
+
+ if (phydev->autoneg != AUTONEG_ENABLE)
+ return genphy_setup_forced(phydev);
+
+ /* Only allow advertising what this PHY supports */
+ phydev->advertising &= phydev->supported;
+ advertise = phydev->advertising;
+
+ /* Setup fiber advertisement */
+ adv = phy_read(phydev, MII_ADVERTISE);
+ if (adv < 0)
+ return adv;
+
+ oldadv = adv;
+ adv &= ~(ADVERTISE_FIBER_1000HALF | ADVERTISE_FIBER_1000FULL
+ | LPA_PAUSE_FIBER);
+ adv |= ethtool_adv_to_fiber_adv_t(advertise);
+
+ if (adv != oldadv) {
+ err = phy_write(phydev, MII_ADVERTISE, adv);
+ if (err < 0)
+ return err;
+
+ changed = 1;
+ }
+
+ if (changed == 0) {
+ /* Advertisement hasn't changed, but maybe aneg was never on to
+ * begin with? Or maybe phy was isolated?
+ */
+ int ctl = phy_read(phydev, MII_BMCR);
+
+ if (ctl < 0)
+ return ctl;
+
+ if (!(ctl & BMCR_ANENABLE) || (ctl & BMCR_ISOLATE))
+ changed = 1; /* do restart aneg */
+ }
+
+ /* Only restart aneg if we are advertising something different
+ * than we were before.
+ */
+ if (changed > 0)
+ changed = genphy_restart_aneg(phydev);
+
+ return changed;
+}
+
static int m88e1510_config_aneg(struct phy_device *phydev)
{
int err;
+ err = phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_M1111_COPPER);
+ if (err < 0)
+ goto error;
+
+ /* Configure the copper link first */
err = m88e1318_config_aneg(phydev);
if (err < 0)
- return err;
+ goto error;
- return 0;
+ /* Then the fiber link */
+ err = phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_M1111_FIBER);
+ if (err < 0)
+ goto error;
+
+ err = marvell_config_aneg_fiber(phydev);
+ if (err < 0)
+ goto error;
+
+ return phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_M1111_COPPER);
+
+error:
+ phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_M1111_COPPER);
+ return err;
}
static int marvell_config_init(struct phy_device *phydev)
@@ -890,26 +1013,79 @@ static int m88e1145_config_init(struct phy_device *phydev)
return 0;
}
-/* marvell_read_status
+/**
+ * fiber_lpa_to_ethtool_lpa_t
+ * @lpa: value of the MII_LPA register for fiber link
+ *
+ * A small helper function that translates MII_LPA
+ * bits to ethtool LP advertisement settings.
+ */
+static u32 fiber_lpa_to_ethtool_lpa_t(u32 lpa)
+{
+ u32 result = 0;
+
+ if (lpa & LPA_FIBER_1000HALF)
+ result |= ADVERTISED_1000baseT_Half;
+ if (lpa & LPA_FIBER_1000FULL)
+ result |= ADVERTISED_1000baseT_Full;
+
+ return result;
+}
+
+/**
+ * marvell_update_link - update link status in real time in @phydev
+ * @phydev: target phy_device struct
+ *
+ * Description: Update the value in phydev->link to reflect the
+ * current link value.
+ */
+static int marvell_update_link(struct phy_device *phydev, int fiber)
+{
+ int status;
+
+ /* Use the generic register for copper link, or specific
+ * register for fiber case */
+ if (fiber) {
+ status = phy_read(phydev, MII_M1011_PHY_STATUS);
+ if (status < 0)
+ return status;
+
+ if ((status & REGISTER_LINK_STATUS) == 0)
+ phydev->link = 0;
+ else
+ phydev->link = 1;
+ } else {
+ return genphy_update_link(phydev);
+ }
+
+ return 0;
+}
+
+/* marvell_read_status_page
*
- * Generic status code does not detect Fiber correctly!
* Description:
* Check the link, then figure out the current state
* by comparing what we advertise with what the link partner
* advertises. Start by checking the gigabit possibilities,
* then move on to 10/100.
*/
-static int marvell_read_status(struct phy_device *phydev)
+static int marvell_read_status_page(struct phy_device *phydev, int page)
{
int adv;
int err;
int lpa;
int lpagb;
int status = 0;
+ int fiber;
- /* Update the link, but return if there
+ /* Detect and update the link, but return if there
* was an error */
- err = genphy_update_link(phydev);
+ if (page == MII_M1111_FIBER)
+ fiber = 1;
+ else
+ fiber = 0;
+
+ err = marvell_update_link(phydev, fiber);
if (err)
return err;
@@ -930,9 +1106,6 @@ static int marvell_read_status(struct phy_device *phydev)
if (adv < 0)
return adv;
- phydev->lp_advertising = mii_stat1000_to_ethtool_lpa_t(lpagb) |
- mii_lpa_to_ethtool_lpa_t(lpa);
-
lpa &= adv;
if (status & MII_M1011_PHY_STATUS_FULLDUPLEX)
@@ -957,9 +1130,30 @@ static int marvell_read_status(struct phy_device *phydev)
break;
}
- if (phydev->duplex == DUPLEX_FULL) {
- phydev->pause = lpa & LPA_PAUSE_CAP ? 1 : 0;
- phydev->asym_pause = lpa & LPA_PAUSE_ASYM ? 1 : 0;
+ if (!fiber) {
+ phydev->lp_advertising = mii_stat1000_to_ethtool_lpa_t(lpagb) |
+ mii_lpa_to_ethtool_lpa_t(lpa);
+
+ if (phydev->duplex == DUPLEX_FULL) {
+ phydev->pause = lpa & LPA_PAUSE_CAP ? 1 : 0;
+ phydev->asym_pause = lpa & LPA_PAUSE_ASYM ? 1 : 0;
+ }
+ } else {
+ /* The fiber link is only 1000M capable */
+ phydev->lp_advertising = fiber_lpa_to_ethtool_lpa_t(lpa);
+
+ if (phydev->duplex == DUPLEX_FULL) {
+ if (!(lpa & LPA_PAUSE_FIBER)) {
+ phydev->pause = 0;
+ phydev->asym_pause = 0;
+ } else if ((lpa & LPA_PAUSE_ASYM_FIBER)) {
+ phydev->pause = 1;
+ phydev->asym_pause = 1;
+ } else {
+ phydev->pause = 1;
+ phydev->asym_pause = 0;
+ }
+ }
}
} else {
int bmcr = phy_read(phydev, MII_BMCR);
@@ -986,6 +1180,119 @@ static int marvell_read_status(struct phy_device *phydev)
return 0;
}
+/* marvell_read_status
+ *
+ * Some Marvell's phys have two modes: fiber and copper.
+ * Both need status checked.
+ * Description:
+ * First, check the fiber link and status.
+ * If the fiber link is down, check the copper link and status which
+ * will be the default value if both link are down.
+ */
+static int marvell_read_status(struct phy_device *phydev)
+{
+ int err;
+
+ /* Check the fiber mode first */
+ if (phydev->supported & SUPPORTED_FIBRE) {
+ err = phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_M1111_FIBER);
+ if (err < 0)
+ goto error;
+
+ err = marvell_read_status_page(phydev, MII_M1111_FIBER);
+ if (err < 0)
+ goto error;
+
+ /* If the fiber link is up, it is the selected and used link.
+ * In this case, we need to stay in the fiber page.
+ * Please to be careful about that, avoid to restore Copper page
+ * in other functions which could break the behaviour
+ * for some fiber phy like 88E1512.
+ * */
+ if (phydev->link)
+ return 0;
+
+ /* If fiber link is down, check and save copper mode state */
+ err = phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_M1111_COPPER);
+ if (err < 0)
+ goto error;
+ }
+
+ return marvell_read_status_page(phydev, MII_M1111_COPPER);
+
+error:
+ phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_M1111_COPPER);
+ return err;
+}
+
+/* marvell_suspend
+ *
+ * Some Marvell's phys have two modes: fiber and copper.
+ * Both need to be suspended
+ */
+static int marvell_suspend(struct phy_device *phydev)
+{
+ int err;
+
+ /* Suspend the fiber mode first */
+ if (!(phydev->supported & SUPPORTED_FIBRE)) {
+ err = phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_M1111_FIBER);
+ if (err < 0)
+ goto error;
+
+ /* With the page set, use the generic suspend */
+ err = genphy_suspend(phydev);
+ if (err < 0)
+ goto error;
+
+ /* Then, the copper link */
+ err = phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_M1111_COPPER);
+ if (err < 0)
+ goto error;
+ }
+
+ /* With the page set, use the generic suspend */
+ return genphy_suspend(phydev);
+
+error:
+ phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_M1111_COPPER);
+ return err;
+}
+
+/* marvell_resume
+ *
+ * Some Marvell's phys have two modes: fiber and copper.
+ * Both need to be resumed
+ */
+static int marvell_resume(struct phy_device *phydev)
+{
+ int err;
+
+ /* Resume the fiber mode first */
+ if (!(phydev->supported & SUPPORTED_FIBRE)) {
+ err = phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_M1111_FIBER);
+ if (err < 0)
+ goto error;
+
+ /* With the page set, use the generic resume */
+ err = genphy_resume(phydev);
+ if (err < 0)
+ goto error;
+
+ /* Then, the copper link */
+ err = phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_M1111_COPPER);
+ if (err < 0)
+ goto error;
+ }
+
+ /* With the page set, use the generic resume */
+ return genphy_resume(phydev);
+
+error:
+ phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_M1111_COPPER);
+ return err;
+}
+
static int marvell_aneg_done(struct phy_device *phydev)
{
int retval = phy_read(phydev, MII_M1011_PHY_STATUS);
@@ -1107,7 +1414,10 @@ static int m88e1318_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *w
static int marvell_get_sset_count(struct phy_device *phydev)
{
- return ARRAY_SIZE(marvell_hw_stats);
+ if (phydev->supported & SUPPORTED_FIBRE)
+ return ARRAY_SIZE(marvell_hw_stats);
+ else
+ return ARRAY_SIZE(marvell_hw_stats) - NB_FIBER_STATS;
}
static void marvell_get_strings(struct phy_device *phydev, u8 *data)
@@ -1361,7 +1671,7 @@ static struct phy_driver marvell_drivers[] = {
.phy_id = MARVELL_PHY_ID_88E1510,
.phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E1510",
- .features = PHY_GBIT_FEATURES,
+ .features = PHY_GBIT_FEATURES | SUPPORTED_FIBRE,
.flags = PHY_HAS_INTERRUPT,
.probe = marvell_probe,
.config_init = &m88e1510_config_init,
@@ -1370,8 +1680,8 @@ static struct phy_driver marvell_drivers[] = {
.ack_interrupt = &marvell_ack_interrupt,
.config_intr = &marvell_config_intr,
.did_interrupt = &m88e1121_did_interrupt,
- .resume = &genphy_resume,
- .suspend = &genphy_suspend,
+ .resume = &marvell_resume,
+ .suspend = &marvell_suspend,
.get_sset_count = marvell_get_sset_count,
.get_strings = marvell_get_strings,
.get_stats = marvell_get_stats,
diff --git a/drivers/net/phy/mdio-hisi-femac.c b/drivers/net/phy/mdio-hisi-femac.c
new file mode 100644
index 000000000000..b03fedd6c1d8
--- /dev/null
+++ b/drivers/net/phy/mdio-hisi-femac.c
@@ -0,0 +1,166 @@
+/*
+ * Hisilicon Fast Ethernet MDIO Bus Driver
+ *
+ * Copyright (c) 2016 HiSilicon Technologies Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/clk.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_mdio.h>
+#include <linux/platform_device.h>
+
+#define MDIO_RWCTRL 0x00
+#define MDIO_RO_DATA 0x04
+#define MDIO_WRITE BIT(13)
+#define MDIO_RW_FINISH BIT(15)
+#define BIT_PHY_ADDR_OFFSET 8
+#define BIT_WR_DATA_OFFSET 16
+
+struct hisi_femac_mdio_data {
+ struct clk *clk;
+ void __iomem *membase;
+};
+
+static int hisi_femac_mdio_wait_ready(struct hisi_femac_mdio_data *data)
+{
+ u32 val;
+
+ return readl_poll_timeout(data->membase + MDIO_RWCTRL,
+ val, val & MDIO_RW_FINISH, 20, 10000);
+}
+
+static int hisi_femac_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
+{
+ struct hisi_femac_mdio_data *data = bus->priv;
+ int ret;
+
+ ret = hisi_femac_mdio_wait_ready(data);
+ if (ret)
+ return ret;
+
+ writel((mii_id << BIT_PHY_ADDR_OFFSET) | regnum,
+ data->membase + MDIO_RWCTRL);
+
+ ret = hisi_femac_mdio_wait_ready(data);
+ if (ret)
+ return ret;
+
+ return readl(data->membase + MDIO_RO_DATA) & 0xFFFF;
+}
+
+static int hisi_femac_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
+ u16 value)
+{
+ struct hisi_femac_mdio_data *data = bus->priv;
+ int ret;
+
+ ret = hisi_femac_mdio_wait_ready(data);
+ if (ret)
+ return ret;
+
+ writel(MDIO_WRITE | (value << BIT_WR_DATA_OFFSET) |
+ (mii_id << BIT_PHY_ADDR_OFFSET) | regnum,
+ data->membase + MDIO_RWCTRL);
+
+ return hisi_femac_mdio_wait_ready(data);
+}
+
+static int hisi_femac_mdio_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct mii_bus *bus;
+ struct hisi_femac_mdio_data *data;
+ struct resource *res;
+ int ret;
+
+ bus = mdiobus_alloc_size(sizeof(*data));
+ if (!bus)
+ return -ENOMEM;
+
+ bus->name = "hisi_femac_mii_bus";
+ bus->read = &hisi_femac_mdio_read;
+ bus->write = &hisi_femac_mdio_write;
+ snprintf(bus->id, MII_BUS_ID_SIZE, "%s", pdev->name);
+ bus->parent = &pdev->dev;
+
+ data = bus->priv;
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ data->membase = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(data->membase)) {
+ ret = PTR_ERR(data->membase);
+ goto err_out_free_mdiobus;
+ }
+
+ data->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(data->clk)) {
+ ret = PTR_ERR(data->clk);
+ goto err_out_free_mdiobus;
+ }
+
+ ret = clk_prepare_enable(data->clk);
+ if (ret)
+ goto err_out_free_mdiobus;
+
+ ret = of_mdiobus_register(bus, np);
+ if (ret)
+ goto err_out_disable_clk;
+
+ platform_set_drvdata(pdev, bus);
+
+ return 0;
+
+err_out_disable_clk:
+ clk_disable_unprepare(data->clk);
+err_out_free_mdiobus:
+ mdiobus_free(bus);
+ return ret;
+}
+
+static int hisi_femac_mdio_remove(struct platform_device *pdev)
+{
+ struct mii_bus *bus = platform_get_drvdata(pdev);
+ struct hisi_femac_mdio_data *data = bus->priv;
+
+ mdiobus_unregister(bus);
+ clk_disable_unprepare(data->clk);
+ mdiobus_free(bus);
+
+ return 0;
+}
+
+static const struct of_device_id hisi_femac_mdio_dt_ids[] = {
+ { .compatible = "hisilicon,hisi-femac-mdio" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, hisi_femac_mdio_dt_ids);
+
+static struct platform_driver hisi_femac_mdio_driver = {
+ .probe = hisi_femac_mdio_probe,
+ .remove = hisi_femac_mdio_remove,
+ .driver = {
+ .name = "hisi-femac-mdio",
+ .of_match_table = hisi_femac_mdio_dt_ids,
+ },
+};
+
+module_platform_driver(hisi_femac_mdio_driver);
+
+MODULE_DESCRIPTION("Hisilicon Fast Ethernet MAC MDIO interface driver");
+MODULE_AUTHOR("Dongpo Li <lidongpo@hisilicon.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/net/phy/mdio-mux-bcm-iproc.c b/drivers/net/phy/mdio-mux-bcm-iproc.c
new file mode 100644
index 000000000000..0a0412524cec
--- /dev/null
+++ b/drivers/net/phy/mdio-mux-bcm-iproc.c
@@ -0,0 +1,248 @@
+/*
+ * Copyright 2016 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation (the "GPL").
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License version 2 (GPLv2) for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * version 2 (GPLv2) along with this source code.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/device.h>
+#include <linux/of_mdio.h>
+#include <linux/module.h>
+#include <linux/phy.h>
+#include <linux/mdio-mux.h>
+#include <linux/delay.h>
+
+#define MDIO_PARAM_OFFSET 0x00
+#define MDIO_PARAM_MIIM_CYCLE 29
+#define MDIO_PARAM_INTERNAL_SEL 25
+#define MDIO_PARAM_BUS_ID 22
+#define MDIO_PARAM_C45_SEL 21
+#define MDIO_PARAM_PHY_ID 16
+#define MDIO_PARAM_PHY_DATA 0
+
+#define MDIO_READ_OFFSET 0x04
+#define MDIO_READ_DATA_MASK 0xffff
+#define MDIO_ADDR_OFFSET 0x08
+
+#define MDIO_CTRL_OFFSET 0x0C
+#define MDIO_CTRL_WRITE_OP 0x1
+#define MDIO_CTRL_READ_OP 0x2
+
+#define MDIO_STAT_OFFSET 0x10
+#define MDIO_STAT_DONE 1
+
+#define BUS_MAX_ADDR 32
+#define EXT_BUS_START_ADDR 16
+
+struct iproc_mdiomux_desc {
+ void *mux_handle;
+ void __iomem *base;
+ struct device *dev;
+ struct mii_bus *mii_bus;
+};
+
+static int iproc_mdio_wait_for_idle(void __iomem *base, bool result)
+{
+ unsigned int timeout = 1000; /* loop for 1s */
+ u32 val;
+
+ do {
+ val = readl(base + MDIO_STAT_OFFSET);
+ if ((val & MDIO_STAT_DONE) == result)
+ return 0;
+
+ usleep_range(1000, 2000);
+ } while (timeout--);
+
+ return -ETIMEDOUT;
+}
+
+/* start_miim_ops- Program and start MDIO transaction over mdio bus.
+ * @base: Base address
+ * @phyid: phyid of the selected bus.
+ * @reg: register offset to be read/written.
+ * @val :0 if read op else value to be written in @reg;
+ * @op: Operation that need to be carried out.
+ * MDIO_CTRL_READ_OP: Read transaction.
+ * MDIO_CTRL_WRITE_OP: Write transaction.
+ *
+ * Return value: Successful Read operation returns read reg values and write
+ * operation returns 0. Failure operation returns negative error code.
+ */
+static int start_miim_ops(void __iomem *base,
+ u16 phyid, u32 reg, u16 val, u32 op)
+{
+ u32 param;
+ int ret;
+
+ writel(0, base + MDIO_CTRL_OFFSET);
+ ret = iproc_mdio_wait_for_idle(base, 0);
+ if (ret)
+ goto err;
+
+ param = readl(base + MDIO_PARAM_OFFSET);
+ param |= phyid << MDIO_PARAM_PHY_ID;
+ param |= val << MDIO_PARAM_PHY_DATA;
+ if (reg & MII_ADDR_C45)
+ param |= BIT(MDIO_PARAM_C45_SEL);
+
+ writel(param, base + MDIO_PARAM_OFFSET);
+
+ writel(reg, base + MDIO_ADDR_OFFSET);
+
+ writel(op, base + MDIO_CTRL_OFFSET);
+
+ ret = iproc_mdio_wait_for_idle(base, 1);
+ if (ret)
+ goto err;
+
+ if (op == MDIO_CTRL_READ_OP)
+ ret = readl(base + MDIO_READ_OFFSET) & MDIO_READ_DATA_MASK;
+err:
+ return ret;
+}
+
+static int iproc_mdiomux_read(struct mii_bus *bus, int phyid, int reg)
+{
+ struct iproc_mdiomux_desc *md = bus->priv;
+ int ret;
+
+ ret = start_miim_ops(md->base, phyid, reg, 0, MDIO_CTRL_READ_OP);
+ if (ret < 0)
+ dev_err(&bus->dev, "mdiomux read operation failed!!!");
+
+ return ret;
+}
+
+static int iproc_mdiomux_write(struct mii_bus *bus,
+ int phyid, int reg, u16 val)
+{
+ struct iproc_mdiomux_desc *md = bus->priv;
+ int ret;
+
+ /* Write val at reg offset */
+ ret = start_miim_ops(md->base, phyid, reg, val, MDIO_CTRL_WRITE_OP);
+ if (ret < 0)
+ dev_err(&bus->dev, "mdiomux write operation failed!!!");
+
+ return ret;
+}
+
+static int mdio_mux_iproc_switch_fn(int current_child, int desired_child,
+ void *data)
+{
+ struct iproc_mdiomux_desc *md = data;
+ u32 param, bus_id;
+ bool bus_dir;
+
+ /* select bus and its properties */
+ bus_dir = (desired_child < EXT_BUS_START_ADDR);
+ bus_id = bus_dir ? desired_child : (desired_child - EXT_BUS_START_ADDR);
+
+ param = (bus_dir ? 1 : 0) << MDIO_PARAM_INTERNAL_SEL;
+ param |= (bus_id << MDIO_PARAM_BUS_ID);
+
+ writel(param, md->base + MDIO_PARAM_OFFSET);
+ return 0;
+}
+
+static int mdio_mux_iproc_probe(struct platform_device *pdev)
+{
+ struct iproc_mdiomux_desc *md;
+ struct mii_bus *bus;
+ struct resource *res;
+ int rc;
+
+ md = devm_kzalloc(&pdev->dev, sizeof(*md), GFP_KERNEL);
+ if (!md)
+ return -ENOMEM;
+ md->dev = &pdev->dev;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ md->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(md->base)) {
+ dev_err(&pdev->dev, "failed to ioremap register\n");
+ return PTR_ERR(md->base);
+ }
+
+ md->mii_bus = mdiobus_alloc();
+ if (!md->mii_bus) {
+ dev_err(&pdev->dev, "mdiomux bus alloc failed\n");
+ return -ENOMEM;
+ }
+
+ bus = md->mii_bus;
+ bus->priv = md;
+ bus->name = "iProc MDIO mux bus";
+ snprintf(bus->id, MII_BUS_ID_SIZE, "%s-%d", pdev->name, pdev->id);
+ bus->parent = &pdev->dev;
+ bus->read = iproc_mdiomux_read;
+ bus->write = iproc_mdiomux_write;
+
+ bus->phy_mask = ~0;
+ bus->dev.of_node = pdev->dev.of_node;
+ rc = mdiobus_register(bus);
+ if (rc) {
+ dev_err(&pdev->dev, "mdiomux registration failed\n");
+ goto out;
+ }
+
+ platform_set_drvdata(pdev, md);
+
+ rc = mdio_mux_init(md->dev, mdio_mux_iproc_switch_fn,
+ &md->mux_handle, md, md->mii_bus);
+ if (rc) {
+ dev_info(md->dev, "mdiomux initialization failed\n");
+ goto out;
+ }
+
+ dev_info(md->dev, "iProc mdiomux registered\n");
+ return 0;
+out:
+ mdiobus_free(bus);
+ return rc;
+}
+
+static int mdio_mux_iproc_remove(struct platform_device *pdev)
+{
+ struct iproc_mdiomux_desc *md = dev_get_platdata(&pdev->dev);
+
+ mdio_mux_uninit(md->mux_handle);
+ mdiobus_unregister(md->mii_bus);
+ mdiobus_free(md->mii_bus);
+
+ return 0;
+}
+
+static const struct of_device_id mdio_mux_iproc_match[] = {
+ {
+ .compatible = "brcm,mdio-mux-iproc",
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, mdio_mux_iproc_match);
+
+static struct platform_driver mdiomux_iproc_driver = {
+ .driver = {
+ .name = "mdio-mux-iproc",
+ .of_match_table = mdio_mux_iproc_match,
+ },
+ .probe = mdio_mux_iproc_probe,
+ .remove = mdio_mux_iproc_remove,
+};
+
+module_platform_driver(mdiomux_iproc_driver);
+
+MODULE_DESCRIPTION("iProc MDIO Mux Bus Driver");
+MODULE_AUTHOR("Pramod Kumar <pramod.kumar@broadcom.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/net/phy/mdio-mux-gpio.c b/drivers/net/phy/mdio-mux-gpio.c
index 7ddb1ab70891..919949960a10 100644
--- a/drivers/net/phy/mdio-mux-gpio.c
+++ b/drivers/net/phy/mdio-mux-gpio.c
@@ -55,7 +55,7 @@ static int mdio_mux_gpio_probe(struct platform_device *pdev)
return PTR_ERR(s->gpios);
r = mdio_mux_init(&pdev->dev,
- mdio_mux_gpio_switch_fn, &s->mux_handle, s);
+ mdio_mux_gpio_switch_fn, &s->mux_handle, s, NULL);
if (r != 0) {
gpiod_put_array(s->gpios);
diff --git a/drivers/net/phy/mdio-mux-mmioreg.c b/drivers/net/phy/mdio-mux-mmioreg.c
index 7fde454fbc4f..d0bed52c8d16 100644
--- a/drivers/net/phy/mdio-mux-mmioreg.c
+++ b/drivers/net/phy/mdio-mux-mmioreg.c
@@ -126,7 +126,7 @@ static int mdio_mux_mmioreg_probe(struct platform_device *pdev)
}
ret = mdio_mux_init(&pdev->dev, mdio_mux_mmioreg_switch_fn,
- &s->mux_handle, s);
+ &s->mux_handle, s, NULL);
if (ret) {
dev_err(&pdev->dev, "failed to register mdio-mux bus %s\n",
np->full_name);
diff --git a/drivers/net/phy/mdio-mux.c b/drivers/net/phy/mdio-mux.c
index 5c81d6faf304..963838d4fac1 100644
--- a/drivers/net/phy/mdio-mux.c
+++ b/drivers/net/phy/mdio-mux.c
@@ -89,7 +89,8 @@ static int parent_count;
int mdio_mux_init(struct device *dev,
int (*switch_fn)(int cur, int desired, void *data),
void **mux_handle,
- void *data)
+ void *data,
+ struct mii_bus *mux_bus)
{
struct device_node *parent_bus_node;
struct device_node *child_bus_node;
@@ -101,10 +102,22 @@ int mdio_mux_init(struct device *dev,
if (!dev->of_node)
return -ENODEV;
- parent_bus_node = of_parse_phandle(dev->of_node, "mdio-parent-bus", 0);
+ if (!mux_bus) {
+ parent_bus_node = of_parse_phandle(dev->of_node,
+ "mdio-parent-bus", 0);
- if (!parent_bus_node)
- return -ENODEV;
+ if (!parent_bus_node)
+ return -ENODEV;
+
+ parent_bus = of_mdio_find_bus(parent_bus_node);
+ if (!parent_bus) {
+ ret_val = -EPROBE_DEFER;
+ goto err_parent_bus;
+ }
+ } else {
+ parent_bus_node = NULL;
+ parent_bus = mux_bus;
+ }
pb = devm_kzalloc(dev, sizeof(*pb), GFP_KERNEL);
if (pb == NULL) {
@@ -112,11 +125,6 @@ int mdio_mux_init(struct device *dev,
goto err_parent_bus;
}
- parent_bus = of_mdio_find_bus(parent_bus_node);
- if (parent_bus == NULL) {
- ret_val = -EPROBE_DEFER;
- goto err_parent_bus;
- }
pb->switch_data = data;
pb->switch_fn = switch_fn;
diff --git a/drivers/net/phy/mdio-xgene.c b/drivers/net/phy/mdio-xgene.c
new file mode 100644
index 000000000000..d94a978024d9
--- /dev/null
+++ b/drivers/net/phy/mdio-xgene.c
@@ -0,0 +1,477 @@
+/* Applied Micro X-Gene SoC MDIO Driver
+ *
+ * Copyright (c) 2016, Applied Micro Circuits Corporation
+ * Author: Iyappan Subramanian <isubramanian@apm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/acpi.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/efi.h>
+#include <linux/if_vlan.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/of_net.h>
+#include <linux/of_mdio.h>
+#include <linux/prefetch.h>
+#include <linux/phy.h>
+#include <net/ip.h>
+#include "mdio-xgene.h"
+
+static bool xgene_mdio_status;
+
+static u32 xgene_enet_rd_mac(void __iomem *base_addr, u32 rd_addr)
+{
+ void __iomem *addr, *rd, *cmd, *cmd_done;
+ u32 done, rd_data = BUSY_MASK;
+ u8 wait = 10;
+
+ addr = base_addr + MAC_ADDR_REG_OFFSET;
+ rd = base_addr + MAC_READ_REG_OFFSET;
+ cmd = base_addr + MAC_COMMAND_REG_OFFSET;
+ cmd_done = base_addr + MAC_COMMAND_DONE_REG_OFFSET;
+
+ iowrite32(rd_addr, addr);
+ iowrite32(XGENE_ENET_RD_CMD, cmd);
+
+ while (wait--) {
+ done = ioread32(cmd_done);
+ if (done)
+ break;
+ udelay(1);
+ }
+
+ if (!done)
+ return rd_data;
+
+ rd_data = ioread32(rd);
+ iowrite32(0, cmd);
+
+ return rd_data;
+}
+
+static void xgene_enet_wr_mac(void __iomem *base_addr, u32 wr_addr, u32 wr_data)
+{
+ void __iomem *addr, *wr, *cmd, *cmd_done;
+ u8 wait = 10;
+ u32 done;
+
+ addr = base_addr + MAC_ADDR_REG_OFFSET;
+ wr = base_addr + MAC_WRITE_REG_OFFSET;
+ cmd = base_addr + MAC_COMMAND_REG_OFFSET;
+ cmd_done = base_addr + MAC_COMMAND_DONE_REG_OFFSET;
+
+ iowrite32(wr_addr, addr);
+ iowrite32(wr_data, wr);
+ iowrite32(XGENE_ENET_WR_CMD, cmd);
+
+ while (wait--) {
+ done = ioread32(cmd_done);
+ if (done)
+ break;
+ udelay(1);
+ }
+
+ if (!done)
+ pr_err("MCX mac write failed, addr: 0x%04x\n", wr_addr);
+
+ iowrite32(0, cmd);
+}
+
+int xgene_mdio_rgmii_read(struct mii_bus *bus, int phy_id, int reg)
+{
+ void __iomem *addr = (void __iomem *)bus->priv;
+ u32 data, done;
+ u8 wait = 10;
+
+ data = SET_VAL(PHY_ADDR, phy_id) | SET_VAL(REG_ADDR, reg);
+ xgene_enet_wr_mac(addr, MII_MGMT_ADDRESS_ADDR, data);
+ xgene_enet_wr_mac(addr, MII_MGMT_COMMAND_ADDR, READ_CYCLE_MASK);
+ do {
+ usleep_range(5, 10);
+ done = xgene_enet_rd_mac(addr, MII_MGMT_INDICATORS_ADDR);
+ } while ((done & BUSY_MASK) && wait--);
+
+ if (done & BUSY_MASK) {
+ dev_err(&bus->dev, "MII_MGMT read failed\n");
+ return -EBUSY;
+ }
+
+ data = xgene_enet_rd_mac(addr, MII_MGMT_STATUS_ADDR);
+ xgene_enet_wr_mac(addr, MII_MGMT_COMMAND_ADDR, 0);
+
+ return data;
+}
+EXPORT_SYMBOL(xgene_mdio_rgmii_read);
+
+int xgene_mdio_rgmii_write(struct mii_bus *bus, int phy_id, int reg, u16 data)
+{
+ void __iomem *addr = (void __iomem *)bus->priv;
+ u32 val, done;
+ u8 wait = 10;
+
+ val = SET_VAL(PHY_ADDR, phy_id) | SET_VAL(REG_ADDR, reg);
+ xgene_enet_wr_mac(addr, MII_MGMT_ADDRESS_ADDR, val);
+
+ xgene_enet_wr_mac(addr, MII_MGMT_CONTROL_ADDR, data);
+ do {
+ usleep_range(5, 10);
+ done = xgene_enet_rd_mac(addr, MII_MGMT_INDICATORS_ADDR);
+ } while ((done & BUSY_MASK) && wait--);
+
+ if (done & BUSY_MASK) {
+ dev_err(&bus->dev, "MII_MGMT write failed\n");
+ return -EBUSY;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(xgene_mdio_rgmii_write);
+
+static u32 xgene_menet_rd_diag_csr(struct xgene_mdio_pdata *pdata, u32 offset)
+{
+ return ioread32(pdata->diag_csr_addr + offset);
+}
+
+static void xgene_menet_wr_diag_csr(struct xgene_mdio_pdata *pdata,
+ u32 offset, u32 val)
+{
+ iowrite32(val, pdata->diag_csr_addr + offset);
+}
+
+static int xgene_enet_ecc_init(struct xgene_mdio_pdata *pdata)
+{
+ u32 data;
+ u8 wait = 10;
+
+ xgene_menet_wr_diag_csr(pdata, MENET_CFG_MEM_RAM_SHUTDOWN_ADDR, 0x0);
+ do {
+ usleep_range(100, 110);
+ data = xgene_menet_rd_diag_csr(pdata, MENET_BLOCK_MEM_RDY_ADDR);
+ } while ((data != 0xffffffff) && wait--);
+
+ if (data != 0xffffffff) {
+ dev_err(pdata->dev, "Failed to release memory from shutdown\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static void xgene_gmac_reset(struct xgene_mdio_pdata *pdata)
+{
+ xgene_enet_wr_mac(pdata->mac_csr_addr, MAC_CONFIG_1_ADDR, SOFT_RESET);
+ xgene_enet_wr_mac(pdata->mac_csr_addr, MAC_CONFIG_1_ADDR, 0);
+}
+
+static int xgene_mdio_reset(struct xgene_mdio_pdata *pdata)
+{
+ int ret;
+
+ if (pdata->dev->of_node) {
+ clk_prepare_enable(pdata->clk);
+ udelay(5);
+ clk_disable_unprepare(pdata->clk);
+ udelay(5);
+ clk_prepare_enable(pdata->clk);
+ udelay(5);
+ } else {
+#ifdef CONFIG_ACPI
+ acpi_evaluate_object(ACPI_HANDLE(pdata->dev),
+ "_RST", NULL, NULL);
+#endif
+ }
+
+ ret = xgene_enet_ecc_init(pdata);
+ if (ret)
+ return ret;
+ xgene_gmac_reset(pdata);
+
+ return 0;
+}
+
+static void xgene_enet_rd_mdio_csr(void __iomem *base_addr,
+ u32 offset, u32 *val)
+{
+ void __iomem *addr = base_addr + offset;
+
+ *val = ioread32(addr);
+}
+
+static void xgene_enet_wr_mdio_csr(void __iomem *base_addr,
+ u32 offset, u32 val)
+{
+ void __iomem *addr = base_addr + offset;
+
+ iowrite32(val, addr);
+}
+
+static int xgene_xfi_mdio_write(struct mii_bus *bus, int phy_id,
+ int reg, u16 data)
+{
+ void __iomem *addr = (void __iomem *)bus->priv;
+ int timeout = 100;
+ u32 status, val;
+
+ val = SET_VAL(HSTPHYADX, phy_id) | SET_VAL(HSTREGADX, reg) |
+ SET_VAL(HSTMIIMWRDAT, data);
+ xgene_enet_wr_mdio_csr(addr, MIIM_FIELD_ADDR, data);
+
+ val = HSTLDCMD | SET_VAL(HSTMIIMCMD, MIIM_CMD_LEGACY_WRITE);
+ xgene_enet_wr_mdio_csr(addr, MIIM_COMMAND_ADDR, val);
+
+ do {
+ usleep_range(5, 10);
+ xgene_enet_rd_mdio_csr(addr, MIIM_INDICATOR_ADDR, &status);
+ } while ((status & BUSY_MASK) && timeout--);
+
+ xgene_enet_wr_mdio_csr(addr, MIIM_COMMAND_ADDR, 0);
+
+ return 0;
+}
+
+static int xgene_xfi_mdio_read(struct mii_bus *bus, int phy_id, int reg)
+{
+ void __iomem *addr = (void __iomem *)bus->priv;
+ u32 data, status, val;
+ int timeout = 100;
+
+ val = SET_VAL(HSTPHYADX, phy_id) | SET_VAL(HSTREGADX, reg);
+ xgene_enet_wr_mdio_csr(addr, MIIM_FIELD_ADDR, val);
+
+ val = HSTLDCMD | SET_VAL(HSTMIIMCMD, MIIM_CMD_LEGACY_READ);
+ xgene_enet_wr_mdio_csr(addr, MIIM_COMMAND_ADDR, val);
+
+ do {
+ usleep_range(5, 10);
+ xgene_enet_rd_mdio_csr(addr, MIIM_INDICATOR_ADDR, &status);
+ } while ((status & BUSY_MASK) && timeout--);
+
+ if (status & BUSY_MASK) {
+ pr_err("XGENET_MII_MGMT write failed\n");
+ return -EBUSY;
+ }
+
+ xgene_enet_rd_mdio_csr(addr, MIIMRD_FIELD_ADDR, &data);
+ xgene_enet_wr_mdio_csr(addr, MIIM_COMMAND_ADDR, 0);
+
+ return data;
+}
+
+struct phy_device *xgene_enet_phy_register(struct mii_bus *bus, int phy_addr)
+{
+ struct phy_device *phy_dev;
+
+ phy_dev = get_phy_device(bus, phy_addr, false);
+ if (!phy_dev || IS_ERR(phy_dev))
+ return NULL;
+
+ if (phy_device_register(phy_dev))
+ phy_device_free(phy_dev);
+
+ return phy_dev;
+}
+EXPORT_SYMBOL(xgene_enet_phy_register);
+
+#ifdef CONFIG_ACPI
+static acpi_status acpi_register_phy(acpi_handle handle, u32 lvl,
+ void *context, void **ret)
+{
+ struct mii_bus *mdio = context;
+ struct acpi_device *adev;
+ struct phy_device *phy_dev;
+ const union acpi_object *obj;
+ u32 phy_addr;
+
+ if (acpi_bus_get_device(handle, &adev))
+ return AE_OK;
+
+ if (acpi_dev_get_property(adev, "phy-channel", ACPI_TYPE_INTEGER, &obj))
+ return AE_OK;
+ phy_addr = obj->integer.value;
+
+ phy_dev = xgene_enet_phy_register(mdio, phy_addr);
+ adev->driver_data = phy_dev;
+
+ return AE_OK;
+}
+#endif
+
+static int xgene_mdio_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct mii_bus *mdio_bus;
+ const struct of_device_id *of_id;
+ struct resource *res;
+ struct xgene_mdio_pdata *pdata;
+ void __iomem *csr_base;
+ int mdio_id = 0, ret = 0;
+
+ of_id = of_match_device(xgene_mdio_of_match, &pdev->dev);
+ if (of_id) {
+ mdio_id = (enum xgene_mdio_id)of_id->data;
+ } else {
+#ifdef CONFIG_ACPI
+ const struct acpi_device_id *acpi_id;
+
+ acpi_id = acpi_match_device(xgene_mdio_acpi_match, &pdev->dev);
+ if (acpi_id)
+ mdio_id = (enum xgene_mdio_id)acpi_id->driver_data;
+#endif
+ }
+
+ if (!mdio_id)
+ return -ENODEV;
+
+ pdata = devm_kzalloc(dev, sizeof(struct xgene_mdio_pdata), GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
+ pdata->mdio_id = mdio_id;
+ pdata->dev = dev;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ csr_base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(csr_base)) {
+ dev_err(dev, "Unable to retrieve mac CSR region\n");
+ return PTR_ERR(csr_base);
+ }
+ pdata->mac_csr_addr = csr_base;
+ pdata->mdio_csr_addr = csr_base + BLOCK_XG_MDIO_CSR_OFFSET;
+ pdata->diag_csr_addr = csr_base + BLOCK_DIAG_CSR_OFFSET;
+
+ if (dev->of_node) {
+ pdata->clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(pdata->clk)) {
+ dev_err(dev, "Unable to retrieve clk\n");
+ return PTR_ERR(pdata->clk);
+ }
+ }
+
+ ret = xgene_mdio_reset(pdata);
+ if (ret)
+ return ret;
+
+ mdio_bus = mdiobus_alloc();
+ if (!mdio_bus)
+ return -ENOMEM;
+
+ mdio_bus->name = "APM X-Gene MDIO bus";
+
+ if (mdio_id == XGENE_MDIO_RGMII) {
+ mdio_bus->read = xgene_mdio_rgmii_read;
+ mdio_bus->write = xgene_mdio_rgmii_write;
+ mdio_bus->priv = (void __force *)pdata->mac_csr_addr;
+ snprintf(mdio_bus->id, MII_BUS_ID_SIZE, "%s",
+ "xgene-mii-rgmii");
+ } else {
+ mdio_bus->read = xgene_xfi_mdio_read;
+ mdio_bus->write = xgene_xfi_mdio_write;
+ mdio_bus->priv = (void __force *)pdata->mdio_csr_addr;
+ snprintf(mdio_bus->id, MII_BUS_ID_SIZE, "%s",
+ "xgene-mii-xfi");
+ }
+
+ mdio_bus->parent = dev;
+ platform_set_drvdata(pdev, pdata);
+
+ if (dev->of_node) {
+ ret = of_mdiobus_register(mdio_bus, dev->of_node);
+ } else {
+#ifdef CONFIG_ACPI
+ /* Mask out all PHYs from auto probing. */
+ mdio_bus->phy_mask = ~0;
+ ret = mdiobus_register(mdio_bus);
+ if (ret)
+ goto out;
+
+ acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_HANDLE(dev), 1,
+ acpi_register_phy, NULL, mdio_bus, NULL);
+#endif
+ }
+
+ if (ret)
+ goto out;
+
+ pdata->mdio_bus = mdio_bus;
+ xgene_mdio_status = true;
+
+ return 0;
+
+out:
+ mdiobus_free(mdio_bus);
+
+ return ret;
+}
+
+static int xgene_mdio_remove(struct platform_device *pdev)
+{
+ struct xgene_mdio_pdata *pdata = platform_get_drvdata(pdev);
+ struct mii_bus *mdio_bus = pdata->mdio_bus;
+ struct device *dev = &pdev->dev;
+
+ mdiobus_unregister(mdio_bus);
+ mdiobus_free(mdio_bus);
+
+ if (dev->of_node) {
+ if (IS_ERR(pdata->clk))
+ clk_disable_unprepare(pdata->clk);
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id xgene_mdio_of_match[] = {
+ {
+ .compatible = "apm,xgene-mdio-rgmii",
+ .data = (void *)XGENE_MDIO_RGMII
+ },
+ {
+ .compatible = "apm,xgene-mdio-xfi",
+ .data = (void *)XGENE_MDIO_XFI
+ },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, xgene_mdio_of_match);
+#endif
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id xgene_mdio_acpi_match[] = {
+ { "APMC0D65", XGENE_MDIO_RGMII },
+ { "APMC0D66", XGENE_MDIO_XFI },
+ { }
+};
+
+MODULE_DEVICE_TABLE(acpi, xgene_mdio_acpi_match);
+#endif
+
+static struct platform_driver xgene_mdio_driver = {
+ .driver = {
+ .name = "xgene-mdio",
+ .of_match_table = of_match_ptr(xgene_mdio_of_match),
+ .acpi_match_table = ACPI_PTR(xgene_mdio_acpi_match),
+ },
+ .probe = xgene_mdio_probe,
+ .remove = xgene_mdio_remove,
+};
+
+module_platform_driver(xgene_mdio_driver);
+
+MODULE_DESCRIPTION("APM X-Gene SoC MDIO driver");
+MODULE_AUTHOR("Iyappan Subramanian <isubramanian@apm.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/phy/mdio-xgene.h b/drivers/net/phy/mdio-xgene.h
new file mode 100644
index 000000000000..354241b53c1d
--- /dev/null
+++ b/drivers/net/phy/mdio-xgene.h
@@ -0,0 +1,143 @@
+/* Applied Micro X-Gene SoC MDIO Driver
+ *
+ * Copyright (c) 2016, Applied Micro Circuits Corporation
+ * Author: Iyappan Subramanian <isubramanian@apm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __MDIO_XGENE_H__
+#define __MDIO_XGENE_H__
+
+#define BLOCK_XG_MDIO_CSR_OFFSET 0x5000
+#define BLOCK_DIAG_CSR_OFFSET 0xd000
+#define XGENET_CONFIG_REG_ADDR 0x20
+
+#define MAC_ADDR_REG_OFFSET 0x00
+#define MAC_COMMAND_REG_OFFSET 0x04
+#define MAC_WRITE_REG_OFFSET 0x08
+#define MAC_READ_REG_OFFSET 0x0c
+#define MAC_COMMAND_DONE_REG_OFFSET 0x10
+
+#define CLKEN_OFFSET 0x08
+#define SRST_OFFSET 0x00
+
+#define MENET_CFG_MEM_RAM_SHUTDOWN_ADDR 0x70
+#define MENET_BLOCK_MEM_RDY_ADDR 0x74
+
+#define MAC_CONFIG_1_ADDR 0x00
+#define MII_MGMT_COMMAND_ADDR 0x24
+#define MII_MGMT_ADDRESS_ADDR 0x28
+#define MII_MGMT_CONTROL_ADDR 0x2c
+#define MII_MGMT_STATUS_ADDR 0x30
+#define MII_MGMT_INDICATORS_ADDR 0x34
+#define SOFT_RESET BIT(31)
+
+#define MII_MGMT_CONFIG_ADDR 0x20
+#define MII_MGMT_COMMAND_ADDR 0x24
+#define MII_MGMT_ADDRESS_ADDR 0x28
+#define MII_MGMT_CONTROL_ADDR 0x2c
+#define MII_MGMT_STATUS_ADDR 0x30
+#define MII_MGMT_INDICATORS_ADDR 0x34
+
+#define MIIM_COMMAND_ADDR 0x20
+#define MIIM_FIELD_ADDR 0x24
+#define MIIM_CONFIGURATION_ADDR 0x28
+#define MIIM_LINKFAILVECTOR_ADDR 0x2c
+#define MIIM_INDICATOR_ADDR 0x30
+#define MIIMRD_FIELD_ADDR 0x34
+
+#define MDIO_CSR_OFFSET 0x5000
+
+#define REG_ADDR_POS 0
+#define REG_ADDR_LEN 5
+#define PHY_ADDR_POS 8
+#define PHY_ADDR_LEN 5
+
+#define HSTMIIMWRDAT_POS 0
+#define HSTMIIMWRDAT_LEN 16
+#define HSTPHYADX_POS 23
+#define HSTPHYADX_LEN 5
+#define HSTREGADX_POS 18
+#define HSTREGADX_LEN 5
+#define HSTLDCMD BIT(3)
+#define HSTMIIMCMD_POS 0
+#define HSTMIIMCMD_LEN 3
+
+#define BUSY_MASK BIT(0)
+#define READ_CYCLE_MASK BIT(0)
+
+enum xgene_enet_cmd {
+ XGENE_ENET_WR_CMD = BIT(31),
+ XGENE_ENET_RD_CMD = BIT(30)
+};
+
+enum {
+ MIIM_CMD_IDLE,
+ MIIM_CMD_LEGACY_WRITE,
+ MIIM_CMD_LEGACY_READ,
+};
+
+enum xgene_mdio_id {
+ XGENE_MDIO_RGMII = 1,
+ XGENE_MDIO_XFI
+};
+
+struct xgene_mdio_pdata {
+ struct clk *clk;
+ struct device *dev;
+ void __iomem *mac_csr_addr;
+ void __iomem *diag_csr_addr;
+ void __iomem *mdio_csr_addr;
+ struct mii_bus *mdio_bus;
+ int mdio_id;
+};
+
+/* Set the specified value into a bit-field defined by its starting position
+ * and length within a single u64.
+ */
+static inline u64 xgene_enet_set_field_value(int pos, int len, u64 val)
+{
+ return (val & ((1ULL << len) - 1)) << pos;
+}
+
+#define SET_VAL(field, val) \
+ xgene_enet_set_field_value(field ## _POS, field ## _LEN, val)
+
+#define SET_BIT(field) \
+ xgene_enet_set_field_value(field ## _POS, 1, 1)
+
+/* Get the value from a bit-field defined by its starting position
+ * and length within the specified u64.
+ */
+static inline u64 xgene_enet_get_field_value(int pos, int len, u64 src)
+{
+ return (src >> pos) & ((1ULL << len) - 1);
+}
+
+#define GET_VAL(field, src) \
+ xgene_enet_get_field_value(field ## _POS, field ## _LEN, src)
+
+#define GET_BIT(field, src) \
+ xgene_enet_get_field_value(field ## _POS, 1, src)
+
+static const struct of_device_id xgene_mdio_of_match[];
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id xgene_mdio_acpi_match[];
+#endif
+int xgene_mdio_rgmii_read(struct mii_bus *bus, int phy_id, int reg);
+int xgene_mdio_rgmii_write(struct mii_bus *bus, int phy_id, int reg, u16 data);
+struct phy_device *xgene_enet_phy_register(struct mii_bus *bus, int phy_addr);
+
+#endif /* __MDIO_XGENE_H__ */
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 5a8fefc25157..059f13b60fe0 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -311,6 +311,36 @@ static int kszphy_config_init(struct phy_device *phydev)
return 0;
}
+static int ksz8041_config_init(struct phy_device *phydev)
+{
+ struct device_node *of_node = phydev->mdio.dev.of_node;
+
+ /* Limit supported and advertised modes in fiber mode */
+ if (of_property_read_bool(of_node, "micrel,fiber-mode")) {
+ phydev->dev_flags |= MICREL_PHY_FXEN;
+ phydev->supported &= SUPPORTED_FIBRE |
+ SUPPORTED_100baseT_Full |
+ SUPPORTED_100baseT_Half;
+ phydev->advertising &= ADVERTISED_FIBRE |
+ ADVERTISED_100baseT_Full |
+ ADVERTISED_100baseT_Half;
+ phydev->autoneg = AUTONEG_DISABLE;
+ }
+
+ return kszphy_config_init(phydev);
+}
+
+static int ksz8041_config_aneg(struct phy_device *phydev)
+{
+ /* Skip auto-negotiation in fiber mode */
+ if (phydev->dev_flags & MICREL_PHY_FXEN) {
+ phydev->speed = SPEED_100;
+ return 0;
+ }
+
+ return genphy_config_aneg(phydev);
+}
+
static int ksz9021_load_values_from_of(struct phy_device *phydev,
const struct device_node *of_node,
u16 reg,
@@ -788,8 +818,8 @@ static struct phy_driver ksphy_driver[] = {
.flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
.driver_data = &ksz8041_type,
.probe = kszphy_probe,
- .config_init = kszphy_config_init,
- .config_aneg = genphy_config_aneg,
+ .config_init = ksz8041_config_init,
+ .config_aneg = ksz8041_config_aneg,
.read_status = genphy_read_status,
.ack_interrupt = kszphy_ack_interrupt,
.config_intr = kszphy_config_intr,
diff --git a/drivers/net/phy/swphy.c b/drivers/net/phy/swphy.c
new file mode 100644
index 000000000000..34f58f2349e9
--- /dev/null
+++ b/drivers/net/phy/swphy.c
@@ -0,0 +1,179 @@
+/*
+ * Software PHY emulation
+ *
+ * Code taken from fixed_phy.c by Russell King <rmk+kernel@arm.linux.org.uk>
+ *
+ * Author: Vitaly Bordug <vbordug@ru.mvista.com>
+ * Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * Copyright (c) 2006-2007 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/export.h>
+#include <linux/mii.h>
+#include <linux/phy.h>
+#include <linux/phy_fixed.h>
+
+#include "swphy.h"
+
+#define MII_REGS_NUM 29
+
+struct swmii_regs {
+ u16 bmcr;
+ u16 bmsr;
+ u16 lpa;
+ u16 lpagb;
+};
+
+enum {
+ SWMII_SPEED_10 = 0,
+ SWMII_SPEED_100,
+ SWMII_SPEED_1000,
+ SWMII_DUPLEX_HALF = 0,
+ SWMII_DUPLEX_FULL,
+};
+
+/*
+ * These two tables get bitwise-anded together to produce the final result.
+ * This means the speed table must contain both duplex settings, and the
+ * duplex table must contain all speed settings.
+ */
+static const struct swmii_regs speed[] = {
+ [SWMII_SPEED_10] = {
+ .bmcr = BMCR_FULLDPLX,
+ .lpa = LPA_10FULL | LPA_10HALF,
+ },
+ [SWMII_SPEED_100] = {
+ .bmcr = BMCR_FULLDPLX | BMCR_SPEED100,
+ .bmsr = BMSR_100FULL | BMSR_100HALF,
+ .lpa = LPA_100FULL | LPA_100HALF,
+ },
+ [SWMII_SPEED_1000] = {
+ .bmcr = BMCR_FULLDPLX | BMCR_SPEED1000,
+ .bmsr = BMSR_ESTATEN,
+ .lpagb = LPA_1000FULL | LPA_1000HALF,
+ },
+};
+
+static const struct swmii_regs duplex[] = {
+ [SWMII_DUPLEX_HALF] = {
+ .bmcr = ~BMCR_FULLDPLX,
+ .bmsr = BMSR_ESTATEN | BMSR_100HALF,
+ .lpa = LPA_10HALF | LPA_100HALF,
+ .lpagb = LPA_1000HALF,
+ },
+ [SWMII_DUPLEX_FULL] = {
+ .bmcr = ~0,
+ .bmsr = BMSR_ESTATEN | BMSR_100FULL,
+ .lpa = LPA_10FULL | LPA_100FULL,
+ .lpagb = LPA_1000FULL,
+ },
+};
+
+static int swphy_decode_speed(int speed)
+{
+ switch (speed) {
+ case 1000:
+ return SWMII_SPEED_1000;
+ case 100:
+ return SWMII_SPEED_100;
+ case 10:
+ return SWMII_SPEED_10;
+ default:
+ return -EINVAL;
+ }
+}
+
+/**
+ * swphy_validate_state - validate the software phy status
+ * @state: software phy status
+ *
+ * This checks that we can represent the state stored in @state can be
+ * represented in the emulated MII registers. Returns 0 if it can,
+ * otherwise returns -EINVAL.
+ */
+int swphy_validate_state(const struct fixed_phy_status *state)
+{
+ int err;
+
+ if (state->link) {
+ err = swphy_decode_speed(state->speed);
+ if (err < 0) {
+ pr_warn("swphy: unknown speed\n");
+ return -EINVAL;
+ }
+ }
+ return 0;
+}
+EXPORT_SYMBOL_GPL(swphy_validate_state);
+
+/**
+ * swphy_read_reg - return a MII register from the fixed phy state
+ * @reg: MII register
+ * @state: fixed phy status
+ *
+ * Return the MII @reg register generated from the fixed phy state @state.
+ */
+int swphy_read_reg(int reg, const struct fixed_phy_status *state)
+{
+ int speed_index, duplex_index;
+ u16 bmsr = BMSR_ANEGCAPABLE;
+ u16 bmcr = 0;
+ u16 lpagb = 0;
+ u16 lpa = 0;
+
+ if (reg > MII_REGS_NUM)
+ return -1;
+
+ speed_index = swphy_decode_speed(state->speed);
+ if (WARN_ON(speed_index < 0))
+ return 0;
+
+ duplex_index = state->duplex ? SWMII_DUPLEX_FULL : SWMII_DUPLEX_HALF;
+
+ bmsr |= speed[speed_index].bmsr & duplex[duplex_index].bmsr;
+
+ if (state->link) {
+ bmsr |= BMSR_LSTATUS | BMSR_ANEGCOMPLETE;
+
+ bmcr |= speed[speed_index].bmcr & duplex[duplex_index].bmcr;
+ lpa |= speed[speed_index].lpa & duplex[duplex_index].lpa;
+ lpagb |= speed[speed_index].lpagb & duplex[duplex_index].lpagb;
+
+ if (state->pause)
+ lpa |= LPA_PAUSE_CAP;
+
+ if (state->asym_pause)
+ lpa |= LPA_PAUSE_ASYM;
+ }
+
+ switch (reg) {
+ case MII_BMCR:
+ return bmcr;
+ case MII_BMSR:
+ return bmsr;
+ case MII_PHYSID1:
+ case MII_PHYSID2:
+ return 0;
+ case MII_LPA:
+ return lpa;
+ case MII_STAT1000:
+ return lpagb;
+
+ /*
+ * We do not support emulating Clause 45 over Clause 22 register
+ * reads. Return an error instead of bogus data.
+ */
+ case MII_MMD_CTRL:
+ case MII_MMD_DATA:
+ return -1;
+
+ default:
+ return 0xffff;
+ }
+}
+EXPORT_SYMBOL_GPL(swphy_read_reg);
diff --git a/drivers/net/phy/swphy.h b/drivers/net/phy/swphy.h
new file mode 100644
index 000000000000..2f09ac324e18
--- /dev/null
+++ b/drivers/net/phy/swphy.h
@@ -0,0 +1,9 @@
+#ifndef SWPHY_H
+#define SWPHY_H
+
+struct fixed_phy_status;
+
+int swphy_validate_state(const struct fixed_phy_status *state);
+int swphy_read_reg(int reg, const struct fixed_phy_status *state);
+
+#endif