diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-5000.c')
-rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-5000.c | 415 |
1 files changed, 202 insertions, 213 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c index 6e6f516ba404..e2f8615c8c9b 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -43,6 +43,7 @@ #include "iwl-io.h" #include "iwl-sta.h" #include "iwl-helpers.h" +#include "iwl-agn-led.h" #include "iwl-5000-hw.h" #include "iwl-6000-hw.h" @@ -72,157 +73,18 @@ static const u16 iwl5000_default_queue_to_tx_fifo[] = { IWL_TX_FIFO_HCCA_2 }; -/* FIXME: same implementation as 4965 */ -static int iwl5000_apm_stop_master(struct iwl_priv *priv) -{ - unsigned long flags; - - spin_lock_irqsave(&priv->lock, flags); - - /* set stop master bit */ - iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_STOP_MASTER); - - iwl_poll_direct_bit(priv, CSR_RESET, - CSR_RESET_REG_FLAG_MASTER_DISABLED, 100); - - spin_unlock_irqrestore(&priv->lock, flags); - IWL_DEBUG_INFO(priv, "stop master\n"); - - return 0; -} - - -int iwl5000_apm_init(struct iwl_priv *priv) -{ - int ret = 0; - - iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS, - CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER); - - /* disable L0s without affecting L1 :don't wait for ICH L0s bug W/A) */ - iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS, - CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX); - - /* Set FH wait threshold to maximum (HW error during stress W/A) */ - iwl_set_bit(priv, CSR_DBG_HPET_MEM_REG, CSR_DBG_HPET_MEM_REG_VAL); - - /* enable HAP INTA to move device L1a -> L0s */ - iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG, - CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A); - - if (priv->cfg->need_pll_cfg) - iwl_set_bit(priv, CSR_ANA_PLL_CFG, CSR50_ANA_PLL_CFG_VAL); - - /* set "initialization complete" bit to move adapter - * D0U* --> D0A* state */ - iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE); - - /* wait for clock stabilization */ - ret = iwl_poll_direct_bit(priv, CSR_GP_CNTRL, - CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000); - if (ret < 0) { - IWL_DEBUG_INFO(priv, "Failed to init the card\n"); - return ret; - } - - /* enable DMA */ - iwl_write_prph(priv, APMG_CLK_EN_REG, APMG_CLK_VAL_DMA_CLK_RQT); - - udelay(20); - - /* disable L1-Active */ - iwl_set_bits_prph(priv, APMG_PCIDEV_STT_REG, - APMG_PCIDEV_STT_VAL_L1_ACT_DIS); - - return ret; -} - -/* FIXME: this is identical to 4965 */ -void iwl5000_apm_stop(struct iwl_priv *priv) -{ - unsigned long flags; - - iwl5000_apm_stop_master(priv); - - spin_lock_irqsave(&priv->lock, flags); - - iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET); - - udelay(10); - - /* clear "init complete" move adapter D0A* --> D0U state */ - iwl_clear_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE); - - spin_unlock_irqrestore(&priv->lock, flags); -} - - -int iwl5000_apm_reset(struct iwl_priv *priv) -{ - int ret = 0; - - iwl5000_apm_stop_master(priv); - - iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET); - - udelay(10); - - - /* FIXME: put here L1A -L0S w/a */ - - if (priv->cfg->need_pll_cfg) - iwl_set_bit(priv, CSR_ANA_PLL_CFG, CSR50_ANA_PLL_CFG_VAL); - - /* set "initialization complete" bit to move adapter - * D0U* --> D0A* state */ - iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE); - - /* wait for clock stabilization */ - ret = iwl_poll_direct_bit(priv, CSR_GP_CNTRL, - CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000); - if (ret < 0) { - IWL_DEBUG_INFO(priv, "Failed to init the card\n"); - goto out; - } - - /* enable DMA */ - iwl_write_prph(priv, APMG_CLK_EN_REG, APMG_CLK_VAL_DMA_CLK_RQT); - - udelay(20); - - /* disable L1-Active */ - iwl_set_bits_prph(priv, APMG_PCIDEV_STT_REG, - APMG_PCIDEV_STT_VAL_L1_ACT_DIS); -out: - - return ret; -} - - -/* NIC configuration for 5000 series and up */ +/* NIC configuration for 5000 series */ void iwl5000_nic_config(struct iwl_priv *priv) { unsigned long flags; u16 radio_cfg; - u16 lctl; spin_lock_irqsave(&priv->lock, flags); - lctl = iwl_pcie_link_ctl(priv); - - /* HW bug W/A */ - /* L1-ASPM is enabled by BIOS */ - if ((lctl & PCI_CFG_LINK_CTRL_VAL_L1_EN) == PCI_CFG_LINK_CTRL_VAL_L1_EN) - /* L1-APSM enabled: disable L0S */ - iwl_set_bit(priv, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED); - else - /* L1-ASPM disabled: enable L0S */ - iwl_clear_bit(priv, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED); - radio_cfg = iwl_eeprom_query16(priv, EEPROM_RADIO_CONFIG); /* write radio config values to register */ - if (EEPROM_RF_CFG_TYPE_MSK(radio_cfg) < EEPROM_5000_RF_CFG_TYPE_MAX) + if (EEPROM_RF_CFG_TYPE_MSK(radio_cfg) < EEPROM_RF_CONFIG_TYPE_MAX) iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG, EEPROM_RF_CFG_TYPE_MSK(radio_cfg) | EEPROM_RF_CFG_STEP_MSK(radio_cfg) | @@ -302,19 +164,22 @@ u16 iwl5000_eeprom_calib_version(struct iwl_priv *priv) static void iwl5000_gain_computation(struct iwl_priv *priv, u32 average_noise[NUM_RX_CHAINS], u16 min_average_noise_antenna_i, - u32 min_average_noise) + u32 min_average_noise, + u8 default_chain) { int i; s32 delta_g; struct iwl_chain_noise_data *data = &priv->chain_noise_data; - /* Find Gain Code for the antennas B and C */ - for (i = 1; i < NUM_RX_CHAINS; i++) { + /* + * Find Gain Code for the chains based on "default chain" + */ + for (i = default_chain + 1; i < NUM_RX_CHAINS; i++) { if ((data->disconn_array[i])) { data->delta_gain_code[i] = 0; continue; } - delta_g = (1000 * ((s32)average_noise[0] - + delta_g = (1000 * ((s32)average_noise[default_chain] - (s32)average_noise[i])) / 1500; /* bound gain by 2 bits value max, 3rd bit is sign */ data->delta_gain_code[i] = @@ -407,6 +272,10 @@ static struct iwl_sensitivity_ranges iwl5000_sensitivity = { .auto_corr_max_cck_mrc = 400, .nrg_th_cck = 95, .nrg_th_ofdm = 95, + + .barker_corr_th_min = 190, + .barker_corr_th_min_mrc = 390, + .nrg_th_cca = 62, }; static struct iwl_sensitivity_ranges iwl5150_sensitivity = { @@ -429,6 +298,10 @@ static struct iwl_sensitivity_ranges iwl5150_sensitivity = { .auto_corr_max_cck_mrc = 400, .nrg_th_cck = 95, .nrg_th_ofdm = 95, + + .barker_corr_th_min = 190, + .barker_corr_th_min_mrc = 390, + .nrg_th_cca = 62, }; const u8 *iwl5000_eeprom_query_addr(const struct iwl_priv *priv, @@ -493,7 +366,7 @@ static int iwl5000_send_calib_cfg(struct iwl_priv *priv) static void iwl5000_rx_calib_result(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb) { - struct iwl_rx_packet *pkt = (void *)rxb->skb->data; + struct iwl_rx_packet *pkt = rxb_addr(rxb); struct iwl_calib_hdr *hdr = (struct iwl_calib_hdr *)pkt->u.raw; int len = le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK; int index; @@ -719,16 +592,6 @@ static void iwl5000_tx_queue_set_status(struct iwl_priv *priv, scd_retry ? "BA" : "AC", txq_id, tx_fifo_id); } -static int iwl5000_send_wimax_coex(struct iwl_priv *priv) -{ - struct iwl_wimax_coex_cmd coex_cmd; - - memset(&coex_cmd, 0, sizeof(coex_cmd)); - - return iwl_send_cmd_pdu(priv, COEX_PRIORITY_TABLE_CMD, - sizeof(coex_cmd), &coex_cmd); -} - int iwl5000_alive_notify(struct iwl_priv *priv) { u32 a; @@ -746,7 +609,8 @@ int iwl5000_alive_notify(struct iwl_priv *priv) for (; a < priv->scd_base_addr + IWL50_SCD_TRANSLATE_TBL_OFFSET; a += 4) iwl_write_targ_mem(priv, a, 0); - for (; a < sizeof(u16) * priv->hw_params.max_txq_num; a += 4) + for (; a < priv->scd_base_addr + + IWL50_SCD_TRANSLATE_TBL_OFFSET_QUEUE(priv->hw_params.max_txq_num); a += 4) iwl_write_targ_mem(priv, a, 0); iwl_write_prph(priv, IWL50_SCD_DRAM_BASE_ADDR, @@ -798,9 +662,13 @@ int iwl5000_alive_notify(struct iwl_priv *priv) iwl_txq_ctx_activate(priv, i); iwl5000_tx_queue_set_status(priv, &priv->txq[i], ac, 0); } - /* TODO - need to initialize those FIFOs inside the loop above, - * not only mark them as active */ - iwl_txq_ctx_activate(priv, 4); + + /* + * TODO - need to initialize these queues and map them to FIFOs + * in the loop above, not only mark them as active. We do this + * because we want the first aggregation queue to be queue #10, + * but do not use 8 or 9 otherwise yet. + */ iwl_txq_ctx_activate(priv, 7); iwl_txq_ctx_activate(priv, 8); iwl_txq_ctx_activate(priv, 9); @@ -808,7 +676,7 @@ int iwl5000_alive_notify(struct iwl_priv *priv) spin_unlock_irqrestore(&priv->lock, flags); - iwl5000_send_wimax_coex(priv); + iwl_send_wimax_coex(priv); iwl5000_set_Xtal_calib(priv); iwl_send_calib_results(priv); @@ -818,32 +686,22 @@ int iwl5000_alive_notify(struct iwl_priv *priv) int iwl5000_hw_set_hw_params(struct iwl_priv *priv) { - if ((priv->cfg->mod_params->num_of_queues > IWL50_NUM_QUEUES) || - (priv->cfg->mod_params->num_of_queues < IWL_MIN_NUM_QUEUES)) { - IWL_ERR(priv, - "invalid queues_num, should be between %d and %d\n", - IWL_MIN_NUM_QUEUES, IWL50_NUM_QUEUES); - return -EINVAL; - } + if (priv->cfg->mod_params->num_of_queues >= IWL_MIN_NUM_QUEUES && + priv->cfg->mod_params->num_of_queues <= IWL50_NUM_QUEUES) + priv->cfg->num_of_queues = + priv->cfg->mod_params->num_of_queues; - priv->hw_params.max_txq_num = priv->cfg->mod_params->num_of_queues; + priv->hw_params.max_txq_num = priv->cfg->num_of_queues; priv->hw_params.dma_chnl_num = FH50_TCSR_CHNL_NUM; priv->hw_params.scd_bc_tbls_size = - IWL50_NUM_QUEUES * sizeof(struct iwl5000_scd_bc_tbl); + priv->cfg->num_of_queues * + sizeof(struct iwl5000_scd_bc_tbl); priv->hw_params.tfd_size = sizeof(struct iwl_tfd); priv->hw_params.max_stations = IWL5000_STATION_COUNT; priv->hw_params.bcast_sta_id = IWL5000_BROADCAST_ID; - switch (priv->hw_rev & CSR_HW_REV_TYPE_MSK) { - case CSR_HW_REV_TYPE_6x00: - case CSR_HW_REV_TYPE_6x50: - priv->hw_params.max_data_size = IWL60_RTC_DATA_SIZE; - priv->hw_params.max_inst_size = IWL60_RTC_INST_SIZE; - break; - default: - priv->hw_params.max_data_size = IWL50_RTC_DATA_SIZE; - priv->hw_params.max_inst_size = IWL50_RTC_INST_SIZE; - } + priv->hw_params.max_data_size = IWL50_RTC_DATA_SIZE; + priv->hw_params.max_inst_size = IWL50_RTC_INST_SIZE; priv->hw_params.max_bsm_size = 0; priv->hw_params.ht40_channel = BIT(IEEE80211_BAND_2GHZ) | @@ -989,11 +847,13 @@ int iwl5000_txq_agg_enable(struct iwl_priv *priv, int txq_id, u16 ra_tid; if ((IWL50_FIRST_AMPDU_QUEUE > txq_id) || - (IWL50_FIRST_AMPDU_QUEUE + IWL50_NUM_AMPDU_QUEUES <= txq_id)) { + (IWL50_FIRST_AMPDU_QUEUE + priv->cfg->num_of_ampdu_queues + <= txq_id)) { IWL_WARN(priv, "queue number out of range: %d, must be %d to %d\n", txq_id, IWL50_FIRST_AMPDU_QUEUE, - IWL50_FIRST_AMPDU_QUEUE + IWL50_NUM_AMPDU_QUEUES - 1); + IWL50_FIRST_AMPDU_QUEUE + + priv->cfg->num_of_ampdu_queues - 1); return -EINVAL; } @@ -1047,11 +907,13 @@ int iwl5000_txq_agg_disable(struct iwl_priv *priv, u16 txq_id, u16 ssn_idx, u8 tx_fifo) { if ((IWL50_FIRST_AMPDU_QUEUE > txq_id) || - (IWL50_FIRST_AMPDU_QUEUE + IWL50_NUM_AMPDU_QUEUES <= txq_id)) { + (IWL50_FIRST_AMPDU_QUEUE + priv->cfg->num_of_ampdu_queues + <= txq_id)) { IWL_ERR(priv, "queue number out of range: %d, must be %d to %d\n", txq_id, IWL50_FIRST_AMPDU_QUEUE, - IWL50_FIRST_AMPDU_QUEUE + IWL50_NUM_AMPDU_QUEUES - 1); + IWL50_FIRST_AMPDU_QUEUE + + priv->cfg->num_of_ampdu_queues - 1); return -EINVAL; } @@ -1132,8 +994,7 @@ static int iwl5000_tx_status_reply_tx(struct iwl_priv *priv, info = IEEE80211_SKB_CB(priv->txq[txq_id].txb[idx].skb[0]); info->status.rates[0].count = tx_resp->failure_frame + 1; info->flags &= ~IEEE80211_TX_CTL_AMPDU; - info->flags |= iwl_is_tx_success(status) ? - IEEE80211_TX_STAT_ACK : 0; + info->flags |= iwl_tx_status_to_mac80211(status); iwl_hwrate_to_tx_control(priv, rate_n_flags, info); /* FIXME: code repetition end */ @@ -1218,7 +1079,7 @@ static int iwl5000_tx_status_reply_tx(struct iwl_priv *priv, static void iwl5000_rx_reply_tx(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb) { - struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; + struct iwl_rx_packet *pkt = rxb_addr(rxb); u16 sequence = le16_to_cpu(pkt->hdr.sequence); int txq_id = SEQ_TO_QUEUE(sequence); int index = SEQ_TO_INDEX(sequence); @@ -1278,8 +1139,7 @@ static void iwl5000_rx_reply_tx(struct iwl_priv *priv, BUG_ON(txq_id != txq->swq_id); info->status.rates[0].count = tx_resp->failure_frame + 1; - info->flags |= iwl_is_tx_success(status) ? - IEEE80211_TX_STAT_ACK : 0; + info->flags |= iwl_tx_status_to_mac80211(status); iwl_hwrate_to_tx_control(priv, le32_to_cpu(tx_resp->rate_n_flags), info); @@ -1389,6 +1249,22 @@ int iwl5000_send_tx_power(struct iwl_priv *priv) /* half dBm need to multiply */ tx_power_cmd.global_lmt = (s8)(2 * priv->tx_power_user_lmt); + + if (priv->tx_power_lmt_in_half_dbm && + priv->tx_power_lmt_in_half_dbm < tx_power_cmd.global_lmt) { + /* + * For the newer devices which using enhanced/extend tx power + * table in EEPROM, the format is in half dBm. driver need to + * convert to dBm format before report to mac80211. + * By doing so, there is a possibility of 1/2 dBm resolution + * lost. driver will perform "round-up" operation before + * reporting, but it will cause 1/2 dBm tx power over the + * regulatory limit. Perform the checking here, if the + * "tx_power_user_lmt" is higher than EEPROM value (in + * half-dBm format), lower the tx power based on EEPROM + */ + tx_power_cmd.global_lmt = priv->tx_power_lmt_in_half_dbm; + } tx_power_cmd.flags = IWL50_TX_POWER_NO_CLOSED; tx_power_cmd.srv_chan_lmt = IWL50_TX_POWER_AUTO; @@ -1459,6 +1335,24 @@ int iwl5000_calc_rssi(struct iwl_priv *priv, return max_rssi - agc - IWL49_RSSI_OFFSET; } +static int iwl5000_send_tx_ant_config(struct iwl_priv *priv, u8 valid_tx_ant) +{ + struct iwl_tx_ant_config_cmd tx_ant_cmd = { + .valid = cpu_to_le32(valid_tx_ant), + }; + + if (IWL_UCODE_API(priv->ucode_ver) > 1) { + IWL_DEBUG_HC(priv, "select valid tx ant: %u\n", valid_tx_ant); + return iwl_send_cmd_pdu(priv, TX_ANT_CONFIGURATION_CMD, + sizeof(struct iwl_tx_ant_config_cmd), + &tx_ant_cmd); + } else { + IWL_DEBUG_HC(priv, "TX_ANT_CONFIGURATION_CMD not supported\n"); + return -EOPNOTSUPP; + } +} + + #define IWL5000_UCODE_GET(item) \ static u32 iwl5000_ucode_get_##item(const struct iwl_ucode_header *ucode,\ u32 api_ver) \ @@ -1497,10 +1391,43 @@ IWL5000_UCODE_GET(init_size); IWL5000_UCODE_GET(init_data_size); IWL5000_UCODE_GET(boot_size); +static int iwl5000_hw_channel_switch(struct iwl_priv *priv, u16 channel) +{ + struct iwl5000_channel_switch_cmd cmd; + const struct iwl_channel_info *ch_info; + struct iwl_host_cmd hcmd = { + .id = REPLY_CHANNEL_SWITCH, + .len = sizeof(cmd), + .flags = CMD_SIZE_HUGE, + .data = &cmd, + }; + + IWL_DEBUG_11H(priv, "channel switch from %d to %d\n", + priv->active_rxon.channel, channel); + cmd.band = priv->band == IEEE80211_BAND_2GHZ; + cmd.channel = cpu_to_le16(channel); + cmd.rxon_flags = priv->staging_rxon.flags; + cmd.rxon_filter_flags = priv->staging_rxon.filter_flags; + cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time); + ch_info = iwl_get_channel_info(priv, priv->band, channel); + if (ch_info) + cmd.expect_beacon = is_channel_radar(ch_info); + else { + IWL_ERR(priv, "invalid channel switch from %u to %u\n", + priv->active_rxon.channel, channel); + return -EFAULT; + } + priv->switch_rxon.channel = cpu_to_le16(channel); + priv->switch_rxon.switch_in_progress = true; + + return iwl_send_cmd_sync(priv, &hcmd); +} + struct iwl_hcmd_ops iwl5000_hcmd = { .rxon_assoc = iwl5000_send_rxon_assoc, .commit_rxon = iwl_commit_rxon, .set_rxon_chain = iwl_set_rxon_chain, + .set_tx_ant = iwl5000_send_tx_ant_config, }; struct iwl_hcmd_utils_ops iwl5000_hcmd_utils = { @@ -1543,10 +1470,10 @@ struct iwl_lib_ops iwl5000_lib = { .alive_notify = iwl5000_alive_notify, .send_tx_power = iwl5000_send_tx_power, .update_chain_flags = iwl_update_chain_flags, + .set_channel_switch = iwl5000_hw_channel_switch, .apm_ops = { - .init = iwl5000_apm_init, - .reset = iwl5000_apm_reset, - .stop = iwl5000_apm_stop, + .init = iwl_apm_init, + .stop = iwl_apm_stop, .config = iwl5000_nic_config, .set_pwr_src = iwl_set_pwr_src, }, @@ -1595,10 +1522,10 @@ static struct iwl_lib_ops iwl5150_lib = { .alive_notify = iwl5000_alive_notify, .send_tx_power = iwl5000_send_tx_power, .update_chain_flags = iwl_update_chain_flags, + .set_channel_switch = iwl5000_hw_channel_switch, .apm_ops = { - .init = iwl5000_apm_init, - .reset = iwl5000_apm_reset, - .stop = iwl5000_apm_stop, + .init = iwl_apm_init, + .stop = iwl_apm_stop, .config = iwl5000_nic_config, .set_pwr_src = iwl_set_pwr_src, }, @@ -1627,11 +1554,12 @@ static struct iwl_lib_ops iwl5150_lib = { }, }; -struct iwl_ops iwl5000_ops = { +static struct iwl_ops iwl5000_ops = { .ucode = &iwl5000_ucode, .lib = &iwl5000_lib, .hcmd = &iwl5000_hcmd, .utils = &iwl5000_hcmd_utils, + .led = &iwlagn_led_ops, }; static struct iwl_ops iwl5150_ops = { @@ -1639,11 +1567,10 @@ static struct iwl_ops iwl5150_ops = { .lib = &iwl5150_lib, .hcmd = &iwl5000_hcmd, .utils = &iwl5000_hcmd_utils, + .led = &iwlagn_led_ops, }; struct iwl_mod_params iwl50_mod_params = { - .num_of_queues = IWL50_NUM_QUEUES, - .num_of_ampdu_queues = IWL50_NUM_AMPDU_QUEUES, .amsdu_size_8K = 1, .restart_fw = 1, /* the rest are 0 by default */ @@ -1660,28 +1587,41 @@ struct iwl_cfg iwl5300_agn_cfg = { .eeprom_size = IWL_5000_EEPROM_IMG_SIZE, .eeprom_ver = EEPROM_5000_EEPROM_VERSION, .eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION, + .num_of_queues = IWL50_NUM_QUEUES, + .num_of_ampdu_queues = IWL50_NUM_AMPDU_QUEUES, .mod_params = &iwl50_mod_params, .valid_tx_ant = ANT_ABC, .valid_rx_ant = ANT_ABC, - .need_pll_cfg = true, + .pll_cfg_val = CSR50_ANA_PLL_CFG_VAL, + .set_l0s = true, + .use_bsm = false, .ht_greenfield_support = true, + .led_compensation = 51, + .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS, + .sm_ps_mode = WLAN_HT_CAP_SM_PS_DISABLED, }; -struct iwl_cfg iwl5100_bg_cfg = { - .name = "5100BG", +struct iwl_cfg iwl5100_bgn_cfg = { + .name = "5100BGN", .fw_name_pre = IWL5000_FW_PRE, .ucode_api_max = IWL5000_UCODE_API_MAX, .ucode_api_min = IWL5000_UCODE_API_MIN, - .sku = IWL_SKU_G, + .sku = IWL_SKU_G|IWL_SKU_N, .ops = &iwl5000_ops, .eeprom_size = IWL_5000_EEPROM_IMG_SIZE, .eeprom_ver = EEPROM_5000_EEPROM_VERSION, .eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION, + .num_of_queues = IWL50_NUM_QUEUES, + .num_of_ampdu_queues = IWL50_NUM_AMPDU_QUEUES, .mod_params = &iwl50_mod_params, .valid_tx_ant = ANT_B, .valid_rx_ant = ANT_AB, - .need_pll_cfg = true, + .pll_cfg_val = CSR50_ANA_PLL_CFG_VAL, + .set_l0s = true, + .use_bsm = false, .ht_greenfield_support = true, + .led_compensation = 51, + .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS, }; struct iwl_cfg iwl5100_abg_cfg = { @@ -1694,11 +1634,16 @@ struct iwl_cfg iwl5100_abg_cfg = { .eeprom_size = IWL_5000_EEPROM_IMG_SIZE, .eeprom_ver = EEPROM_5000_EEPROM_VERSION, .eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION, + .num_of_queues = IWL50_NUM_QUEUES, + .num_of_ampdu_queues = IWL50_NUM_AMPDU_QUEUES, .mod_params = &iwl50_mod_params, .valid_tx_ant = ANT_B, .valid_rx_ant = ANT_AB, - .need_pll_cfg = true, - .ht_greenfield_support = true, + .pll_cfg_val = CSR50_ANA_PLL_CFG_VAL, + .set_l0s = true, + .use_bsm = false, + .led_compensation = 51, + .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS, }; struct iwl_cfg iwl5100_agn_cfg = { @@ -1711,11 +1656,18 @@ struct iwl_cfg iwl5100_agn_cfg = { .eeprom_size = IWL_5000_EEPROM_IMG_SIZE, .eeprom_ver = EEPROM_5000_EEPROM_VERSION, .eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION, + .num_of_queues = IWL50_NUM_QUEUES, + .num_of_ampdu_queues = IWL50_NUM_AMPDU_QUEUES, .mod_params = &iwl50_mod_params, .valid_tx_ant = ANT_B, .valid_rx_ant = ANT_AB, - .need_pll_cfg = true, + .pll_cfg_val = CSR50_ANA_PLL_CFG_VAL, + .set_l0s = true, + .use_bsm = false, .ht_greenfield_support = true, + .led_compensation = 51, + .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS, + .sm_ps_mode = WLAN_HT_CAP_SM_PS_DISABLED, }; struct iwl_cfg iwl5350_agn_cfg = { @@ -1728,11 +1680,18 @@ struct iwl_cfg iwl5350_agn_cfg = { .eeprom_size = IWL_5000_EEPROM_IMG_SIZE, .eeprom_ver = EEPROM_5050_EEPROM_VERSION, .eeprom_calib_ver = EEPROM_5050_TX_POWER_VERSION, + .num_of_queues = IWL50_NUM_QUEUES, + .num_of_ampdu_queues = IWL50_NUM_AMPDU_QUEUES, .mod_params = &iwl50_mod_params, .valid_tx_ant = ANT_ABC, .valid_rx_ant = ANT_ABC, - .need_pll_cfg = true, + .pll_cfg_val = CSR50_ANA_PLL_CFG_VAL, + .set_l0s = true, + .use_bsm = false, .ht_greenfield_support = true, + .led_compensation = 51, + .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS, + .sm_ps_mode = WLAN_HT_CAP_SM_PS_DISABLED, }; struct iwl_cfg iwl5150_agn_cfg = { @@ -1745,24 +1704,54 @@ struct iwl_cfg iwl5150_agn_cfg = { .eeprom_size = IWL_5000_EEPROM_IMG_SIZE, .eeprom_ver = EEPROM_5050_EEPROM_VERSION, .eeprom_calib_ver = EEPROM_5050_TX_POWER_VERSION, + .num_of_queues = IWL50_NUM_QUEUES, + .num_of_ampdu_queues = IWL50_NUM_AMPDU_QUEUES, .mod_params = &iwl50_mod_params, .valid_tx_ant = ANT_A, .valid_rx_ant = ANT_AB, - .need_pll_cfg = true, + .pll_cfg_val = CSR50_ANA_PLL_CFG_VAL, + .set_l0s = true, + .use_bsm = false, .ht_greenfield_support = true, + .led_compensation = 51, + .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS, + .sm_ps_mode = WLAN_HT_CAP_SM_PS_DISABLED, +}; + +struct iwl_cfg iwl5150_abg_cfg = { + .name = "5150ABG", + .fw_name_pre = IWL5150_FW_PRE, + .ucode_api_max = IWL5150_UCODE_API_MAX, + .ucode_api_min = IWL5150_UCODE_API_MIN, + .sku = IWL_SKU_A|IWL_SKU_G, + .ops = &iwl5150_ops, + .eeprom_size = IWL_5000_EEPROM_IMG_SIZE, + .eeprom_ver = EEPROM_5050_EEPROM_VERSION, + .eeprom_calib_ver = EEPROM_5050_TX_POWER_VERSION, + .num_of_queues = IWL50_NUM_QUEUES, + .num_of_ampdu_queues = IWL50_NUM_AMPDU_QUEUES, + .mod_params = &iwl50_mod_params, + .valid_tx_ant = ANT_A, + .valid_rx_ant = ANT_AB, + .pll_cfg_val = CSR50_ANA_PLL_CFG_VAL, + .set_l0s = true, + .use_bsm = false, + .led_compensation = 51, + .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS, }; MODULE_FIRMWARE(IWL5000_MODULE_FIRMWARE(IWL5000_UCODE_API_MAX)); MODULE_FIRMWARE(IWL5150_MODULE_FIRMWARE(IWL5150_UCODE_API_MAX)); -module_param_named(swcrypto50, iwl50_mod_params.sw_crypto, bool, 0444); +module_param_named(swcrypto50, iwl50_mod_params.sw_crypto, bool, S_IRUGO); MODULE_PARM_DESC(swcrypto50, "using software crypto engine (default 0 [hardware])\n"); -module_param_named(queues_num50, iwl50_mod_params.num_of_queues, int, 0444); +module_param_named(queues_num50, iwl50_mod_params.num_of_queues, int, S_IRUGO); MODULE_PARM_DESC(queues_num50, "number of hw queues in 50xx series"); -module_param_named(11n_disable50, iwl50_mod_params.disable_11n, int, 0444); +module_param_named(11n_disable50, iwl50_mod_params.disable_11n, int, S_IRUGO); MODULE_PARM_DESC(11n_disable50, "disable 50XX 11n functionality"); -module_param_named(amsdu_size_8K50, iwl50_mod_params.amsdu_size_8K, int, 0444); +module_param_named(amsdu_size_8K50, iwl50_mod_params.amsdu_size_8K, + int, S_IRUGO); MODULE_PARM_DESC(amsdu_size_8K50, "enable 8K amsdu size in 50XX series"); -module_param_named(fw_restart50, iwl50_mod_params.restart_fw, int, 0444); +module_param_named(fw_restart50, iwl50_mod_params.restart_fw, int, S_IRUGO); MODULE_PARM_DESC(fw_restart50, "restart firmware in case of error"); |