diff options
Diffstat (limited to 'drivers/net/wireless/rsi/rsi_mgmt.h')
| -rw-r--r-- | drivers/net/wireless/rsi/rsi_mgmt.h | 76 |
1 files changed, 76 insertions, 0 deletions
diff --git a/drivers/net/wireless/rsi/rsi_mgmt.h b/drivers/net/wireless/rsi/rsi_mgmt.h index dfbf7a50269b..dcb6db728cbd 100644 --- a/drivers/net/wireless/rsi/rsi_mgmt.h +++ b/drivers/net/wireless/rsi/rsi_mgmt.h @@ -205,6 +205,7 @@ enum cmd_frame_type { CW_MODE_REQ, PER_CMD_PKT, ANT_SEL_FRAME = 0x20, + COMMON_DEV_CONFIG = 0x28, RADIO_PARAMS_UPDATE = 0x29 }; @@ -282,6 +283,76 @@ struct rsi_radio_caps { __le16 preamble_type; } __packed; +/* ULP GPIO flags */ +#define RSI_GPIO_MOTION_SENSOR_ULP_WAKEUP BIT(0) +#define RSI_GPIO_SLEEP_IND_FROM_DEVICE BIT(1) +#define RSI_GPIO_2_ULP BIT(2) +#define RSI_GPIO_PUSH_BUTTON_ULP_WAKEUP BIT(3) + +/* SOC GPIO flags */ +#define RSI_GPIO_0_PSPI_CSN_0 BIT(0) +#define RSI_GPIO_1_PSPI_CSN_1 BIT(1) +#define RSI_GPIO_2_HOST_WAKEUP_INTR BIT(2) +#define RSI_GPIO_3_PSPI_DATA_0 BIT(3) +#define RSI_GPIO_4_PSPI_DATA_1 BIT(4) +#define RSI_GPIO_5_PSPI_DATA_2 BIT(5) +#define RSI_GPIO_6_PSPI_DATA_3 BIT(6) +#define RSI_GPIO_7_I2C_SCL BIT(7) +#define RSI_GPIO_8_I2C_SDA BIT(8) +#define RSI_GPIO_9_UART1_RX BIT(9) +#define RSI_GPIO_10_UART1_TX BIT(10) +#define RSI_GPIO_11_UART1_RTS_I2S_CLK BIT(11) +#define RSI_GPIO_12_UART1_CTS_I2S_WS BIT(12) +#define RSI_GPIO_13_DBG_UART_RX_I2S_DIN BIT(13) +#define RSI_GPIO_14_DBG_UART_RX_I2S_DOUT BIT(14) +#define RSI_GPIO_15_LP_WAKEUP_BOOT_BYPASS BIT(15) +#define RSI_GPIO_16_LED_0 BIT(16) +#define RSI_GPIO_17_BTCOEX_WLAN_ACT_EXT_ANT_SEL BIT(17) +#define RSI_GPIO_18_BTCOEX_BT_PRIO_EXT_ANT_SEL BIT(18) +#define RSI_GPIO_19_BTCOEX_BT_ACT_EXT_ON_OFF BIT(19) +#define RSI_GPIO_20_RF_RESET BIT(20) +#define RSI_GPIO_21_SLEEP_IND_FROM_DEVICE BIT(21) + +#define RSI_UNUSED_SOC_GPIO_BITMAP (RSI_GPIO_9_UART1_RX | \ + RSI_GPIO_10_UART1_TX | \ + RSI_GPIO_11_UART1_RTS_I2S_CLK | \ + RSI_GPIO_12_UART1_CTS_I2S_WS | \ + RSI_GPIO_13_DBG_UART_RX_I2S_DIN | \ + RSI_GPIO_14_DBG_UART_RX_I2S_DOUT | \ + RSI_GPIO_15_LP_WAKEUP_BOOT_BYPASS | \ + RSI_GPIO_17_BTCOEX_WLAN_ACT_EXT_ANT_SEL | \ + RSI_GPIO_18_BTCOEX_BT_PRIO_EXT_ANT_SEL | \ + RSI_GPIO_19_BTCOEX_BT_ACT_EXT_ON_OFF | \ + RSI_GPIO_21_SLEEP_IND_FROM_DEVICE) + +#define RSI_UNUSED_ULP_GPIO_BITMAP (RSI_GPIO_MOTION_SENSOR_ULP_WAKEUP | \ + RSI_GPIO_SLEEP_IND_FROM_DEVICE | \ + RSI_GPIO_2_ULP | \ + RSI_GPIO_PUSH_BUTTON_ULP_WAKEUP); +struct rsi_config_vals { + __le16 len_qno; + u8 pkt_type; + u8 misc_flags; + __le16 reserved1[6]; + u8 lp_ps_handshake; + u8 ulp_ps_handshake; + u8 sleep_config_params; /* 0 for no handshake, + * 1 for GPIO based handshake, + * 2 packet handshake + */ + u8 unused_ulp_gpio; + __le32 unused_soc_gpio_bitmap; + u8 ext_pa_or_bt_coex_en; + u8 opermode; + u8 wlan_rf_pwr_mode; + u8 bt_rf_pwr_mode; + u8 zigbee_rf_pwr_mode; + u8 driver_mode; + u8 region_code; + u8 antenna_sel_val; + u8 reserved2[16]; +} __packed; + static inline u32 rsi_get_queueno(u8 *addr, u16 offset) { return (le16_to_cpu(*(__le16 *)&addr[offset]) & 0x7000) >> 12; @@ -307,6 +378,11 @@ static inline u8 rsi_get_channel(u8 *addr) return *(char *)(addr + 15); } +static inline void rsi_set_len_qno(__le16 *addr, u16 len, u8 qno) +{ + *addr = cpu_to_le16(len | ((qno & 7) << 12)); +} + int rsi_mgmt_pkt_recv(struct rsi_common *common, u8 *msg); int rsi_set_vap_capabilities(struct rsi_common *common, enum opmode mode, u8 vap_status); |