diff options
Diffstat (limited to 'drivers/phy/qualcomm/phy-qcom-edp.c')
-rw-r--r-- | drivers/phy/qualcomm/phy-qcom-edp.c | 321 |
1 files changed, 277 insertions, 44 deletions
diff --git a/drivers/phy/qualcomm/phy-qcom-edp.c b/drivers/phy/qualcomm/phy-qcom-edp.c index 621d0453bf76..da2b32fb5b45 100644 --- a/drivers/phy/qualcomm/phy-qcom-edp.c +++ b/drivers/phy/qualcomm/phy-qcom-edp.c @@ -24,6 +24,7 @@ #include "phy-qcom-qmp-dp-phy.h" #include "phy-qcom-qmp-qserdes-com-v4.h" +#include "phy-qcom-qmp-qserdes-com-v6.h" /* EDP_PHY registers */ #define DP_PHY_CFG 0x0010 @@ -77,9 +78,20 @@ struct qcom_edp_swing_pre_emph_cfg { const u8 (*pre_emphasis_hbr3_hbr2)[4][4]; }; +struct qcom_edp; + +struct phy_ver_ops { + int (*com_power_on)(const struct qcom_edp *edp); + int (*com_resetsm_cntrl)(const struct qcom_edp *edp); + int (*com_bias_en_clkbuflr)(const struct qcom_edp *edp); + int (*com_configure_pll)(const struct qcom_edp *edp); + int (*com_configure_ssc)(const struct qcom_edp *edp); +}; + struct qcom_edp_phy_cfg { bool is_edp; const struct qcom_edp_swing_pre_emph_cfg *swing_pre_emph_cfg; + const struct phy_ver_ops *ver_ops; }; struct qcom_edp { @@ -174,18 +186,6 @@ static const struct qcom_edp_swing_pre_emph_cfg edp_phy_swing_pre_emph_cfg = { .pre_emphasis_hbr3_hbr2 = &edp_pre_emp_hbr2_hbr3, }; -static const struct qcom_edp_phy_cfg sc7280_dp_phy_cfg = { -}; - -static const struct qcom_edp_phy_cfg sc8280xp_dp_phy_cfg = { - .swing_pre_emph_cfg = &dp_phy_swing_pre_emph_cfg, -}; - -static const struct qcom_edp_phy_cfg sc8280xp_edp_phy_cfg = { - .is_edp = true, - .swing_pre_emph_cfg = &edp_phy_swing_pre_emph_cfg, -}; - static int qcom_edp_phy_init(struct phy *phy) { struct qcom_edp *edp = phy_get_drvdata(phy); @@ -204,8 +204,9 @@ static int qcom_edp_phy_init(struct phy *phy) DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN, edp->edp + DP_PHY_PD_CTL); - /* Turn on BIAS current for PHY/PLL */ - writel(0x17, edp->pll + QSERDES_V4_COM_BIAS_EN_CLKBUFLR_EN); + ret = edp->cfg->ver_ops->com_bias_en_clkbuflr(edp); + if (ret) + return ret; writel(DP_PHY_PD_CTL_PSR_PWRDN, edp->edp + DP_PHY_PD_CTL); msleep(20); @@ -313,6 +314,84 @@ static int qcom_edp_phy_configure(struct phy *phy, union phy_configure_opts *opt static int qcom_edp_configure_ssc(const struct qcom_edp *edp) { + return edp->cfg->ver_ops->com_configure_ssc(edp); +} + +static int qcom_edp_configure_pll(const struct qcom_edp *edp) +{ + return edp->cfg->ver_ops->com_configure_pll(edp); +} + +static int qcom_edp_set_vco_div(const struct qcom_edp *edp, unsigned long *pixel_freq) +{ + const struct phy_configure_opts_dp *dp_opts = &edp->dp_opts; + u32 vco_div; + + switch (dp_opts->link_rate) { + case 1620: + vco_div = 0x1; + *pixel_freq = 1620000000UL / 2; + break; + + case 2700: + vco_div = 0x1; + *pixel_freq = 2700000000UL / 2; + break; + + case 5400: + vco_div = 0x2; + *pixel_freq = 5400000000UL / 4; + break; + + case 8100: + vco_div = 0x0; + *pixel_freq = 8100000000UL / 6; + break; + + default: + /* Other link rates aren't supported */ + return -EINVAL; + } + + writel(vco_div, edp->edp + DP_PHY_VCO_DIV); + + return 0; +} + +static int qcom_edp_phy_power_on_v4(const struct qcom_edp *edp) +{ + u32 val; + + writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN | + DP_PHY_PD_CTL_LANE_0_1_PWRDN | DP_PHY_PD_CTL_LANE_2_3_PWRDN | + DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN, + edp->edp + DP_PHY_PD_CTL); + writel(0xfc, edp->edp + DP_PHY_MODE); + + return readl_poll_timeout(edp->pll + QSERDES_V4_COM_CMN_STATUS, + val, val & BIT(7), 5, 200); +} + +static int qcom_edp_phy_com_resetsm_cntrl_v4(const struct qcom_edp *edp) +{ + u32 val; + + writel(0x20, edp->pll + QSERDES_V4_COM_RESETSM_CNTRL); + + return readl_poll_timeout(edp->pll + QSERDES_V4_COM_C_READY_STATUS, + val, val & BIT(0), 500, 10000); +} + +static int qcom_edp_com_bias_en_clkbuflr_v4(const struct qcom_edp *edp) +{ + /* Turn on BIAS current for PHY/PLL */ + writel(0x17, edp->pll + QSERDES_V4_COM_BIAS_EN_CLKBUFLR_EN); + + return 0; +} + +static int qcom_edp_com_configure_ssc_v4(const struct qcom_edp *edp) +{ const struct phy_configure_opts_dp *dp_opts = &edp->dp_opts; u32 step1; u32 step2; @@ -345,7 +424,7 @@ static int qcom_edp_configure_ssc(const struct qcom_edp *edp) return 0; } -static int qcom_edp_configure_pll(const struct qcom_edp *edp) +static int qcom_edp_com_configure_pll_v4(const struct qcom_edp *edp) { const struct phy_configure_opts_dp *dp_opts = &edp->dp_opts; u32 div_frac_start2_mode0; @@ -431,30 +510,150 @@ static int qcom_edp_configure_pll(const struct qcom_edp *edp) return 0; } -static int qcom_edp_set_vco_div(const struct qcom_edp *edp, unsigned long *pixel_freq) +static const struct phy_ver_ops qcom_edp_phy_ops_v4 = { + .com_power_on = qcom_edp_phy_power_on_v4, + .com_resetsm_cntrl = qcom_edp_phy_com_resetsm_cntrl_v4, + .com_bias_en_clkbuflr = qcom_edp_com_bias_en_clkbuflr_v4, + .com_configure_pll = qcom_edp_com_configure_pll_v4, + .com_configure_ssc = qcom_edp_com_configure_ssc_v4, +}; + +static const struct qcom_edp_phy_cfg sc7280_dp_phy_cfg = { + .ver_ops = &qcom_edp_phy_ops_v4, +}; + +static const struct qcom_edp_phy_cfg sc8280xp_dp_phy_cfg = { + .swing_pre_emph_cfg = &dp_phy_swing_pre_emph_cfg, + .ver_ops = &qcom_edp_phy_ops_v4, +}; + +static const struct qcom_edp_phy_cfg sc8280xp_edp_phy_cfg = { + .is_edp = true, + .swing_pre_emph_cfg = &edp_phy_swing_pre_emph_cfg, + .ver_ops = &qcom_edp_phy_ops_v4, +}; + +static int qcom_edp_phy_power_on_v6(const struct qcom_edp *edp) +{ + u32 val; + + writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN | + DP_PHY_PD_CTL_LANE_0_1_PWRDN | DP_PHY_PD_CTL_LANE_2_3_PWRDN | + DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN, + edp->edp + DP_PHY_PD_CTL); + writel(0xfc, edp->edp + DP_PHY_MODE); + + return readl_poll_timeout(edp->pll + QSERDES_V6_COM_CMN_STATUS, + val, val & BIT(7), 5, 200); +} + +static int qcom_edp_phy_com_resetsm_cntrl_v6(const struct qcom_edp *edp) +{ + u32 val; + + writel(0x20, edp->pll + QSERDES_V6_COM_RESETSM_CNTRL); + + return readl_poll_timeout(edp->pll + QSERDES_V6_COM_C_READY_STATUS, + val, val & BIT(0), 500, 10000); +} + +static int qcom_edp_com_bias_en_clkbuflr_v6(const struct qcom_edp *edp) +{ + /* Turn on BIAS current for PHY/PLL */ + writel(0x1f, edp->pll + QSERDES_V6_COM_PLL_BIAS_EN_CLK_BUFLR_EN); + + return 0; +} + +static int qcom_edp_com_configure_ssc_v6(const struct qcom_edp *edp) { const struct phy_configure_opts_dp *dp_opts = &edp->dp_opts; - u32 vco_div; + u32 step1; + u32 step2; switch (dp_opts->link_rate) { case 1620: - vco_div = 0x1; - *pixel_freq = 1620000000UL / 2; + case 2700: + case 8100: + step1 = 0x92; + step2 = 0x01; + break; + + case 5400: + step1 = 0x18; + step2 = 0x02; + break; + + default: + /* Other link rates aren't supported */ + return -EINVAL; + } + + writel(0x01, edp->pll + QSERDES_V6_COM_SSC_EN_CENTER); + writel(0x00, edp->pll + QSERDES_V6_COM_SSC_ADJ_PER1); + writel(0x36, edp->pll + QSERDES_V6_COM_SSC_PER1); + writel(0x01, edp->pll + QSERDES_V6_COM_SSC_PER2); + writel(step1, edp->pll + QSERDES_V6_COM_SSC_STEP_SIZE1_MODE0); + writel(step2, edp->pll + QSERDES_V6_COM_SSC_STEP_SIZE2_MODE0); + + return 0; +} + +static int qcom_edp_com_configure_pll_v6(const struct qcom_edp *edp) +{ + const struct phy_configure_opts_dp *dp_opts = &edp->dp_opts; + u32 div_frac_start2_mode0; + u32 div_frac_start3_mode0; + u32 dec_start_mode0; + u32 lock_cmp1_mode0; + u32 lock_cmp2_mode0; + u32 code1_mode0; + u32 code2_mode0; + u32 hsclk_sel; + + switch (dp_opts->link_rate) { + case 1620: + hsclk_sel = 0x5; + dec_start_mode0 = 0x34; + div_frac_start2_mode0 = 0xc0; + div_frac_start3_mode0 = 0x0b; + lock_cmp1_mode0 = 0x37; + lock_cmp2_mode0 = 0x04; + code1_mode0 = 0x71; + code2_mode0 = 0x0c; break; case 2700: - vco_div = 0x1; - *pixel_freq = 2700000000UL / 2; + hsclk_sel = 0x3; + dec_start_mode0 = 0x34; + div_frac_start2_mode0 = 0xc0; + div_frac_start3_mode0 = 0x0b; + lock_cmp1_mode0 = 0x07; + lock_cmp2_mode0 = 0x07; + code1_mode0 = 0x71; + code2_mode0 = 0x0c; break; case 5400: - vco_div = 0x2; - *pixel_freq = 5400000000UL / 4; + hsclk_sel = 0x1; + dec_start_mode0 = 0x46; + div_frac_start2_mode0 = 0x00; + div_frac_start3_mode0 = 0x05; + lock_cmp1_mode0 = 0x0f; + lock_cmp2_mode0 = 0x0e; + code1_mode0 = 0x97; + code2_mode0 = 0x10; break; case 8100: - vco_div = 0x0; - *pixel_freq = 8100000000UL / 6; + hsclk_sel = 0x0; + dec_start_mode0 = 0x34; + div_frac_start2_mode0 = 0xc0; + div_frac_start3_mode0 = 0x0b; + lock_cmp1_mode0 = 0x17; + lock_cmp2_mode0 = 0x15; + code1_mode0 = 0x71; + code2_mode0 = 0x0c; break; default: @@ -462,33 +661,69 @@ static int qcom_edp_set_vco_div(const struct qcom_edp *edp, unsigned long *pixel return -EINVAL; } - writel(vco_div, edp->edp + DP_PHY_VCO_DIV); + writel(0x01, edp->pll + QSERDES_V6_COM_SVS_MODE_CLK_SEL); + writel(0x0b, edp->pll + QSERDES_V6_COM_SYSCLK_EN_SEL); + writel(0x02, edp->pll + QSERDES_V6_COM_SYS_CLK_CTRL); + writel(0x0c, edp->pll + QSERDES_V6_COM_CLK_ENABLE1); + writel(0x06, edp->pll + QSERDES_V6_COM_SYSCLK_BUF_ENABLE); + writel(0x30, edp->pll + QSERDES_V6_COM_CLK_SELECT); + writel(hsclk_sel, edp->pll + QSERDES_V6_COM_HSCLK_SEL_1); + writel(0x07, edp->pll + QSERDES_V6_COM_PLL_IVCO); + writel(0x08, edp->pll + QSERDES_V6_COM_LOCK_CMP_EN); + writel(0x36, edp->pll + QSERDES_V6_COM_PLL_CCTRL_MODE0); + writel(0x16, edp->pll + QSERDES_V6_COM_PLL_RCTRL_MODE0); + writel(0x06, edp->pll + QSERDES_V6_COM_CP_CTRL_MODE0); + writel(dec_start_mode0, edp->pll + QSERDES_V6_COM_DEC_START_MODE0); + writel(0x00, edp->pll + QSERDES_V6_COM_DIV_FRAC_START1_MODE0); + writel(div_frac_start2_mode0, edp->pll + QSERDES_V6_COM_DIV_FRAC_START2_MODE0); + writel(div_frac_start3_mode0, edp->pll + QSERDES_V6_COM_DIV_FRAC_START3_MODE0); + writel(0x12, edp->pll + QSERDES_V6_COM_CMN_CONFIG_1); + writel(0x3f, edp->pll + QSERDES_V6_COM_INTEGLOOP_GAIN0_MODE0); + writel(0x00, edp->pll + QSERDES_V6_COM_INTEGLOOP_GAIN1_MODE0); + writel(0x00, edp->pll + QSERDES_V6_COM_VCO_TUNE_MAP); + writel(lock_cmp1_mode0, edp->pll + QSERDES_V6_COM_LOCK_CMP1_MODE0); + writel(lock_cmp2_mode0, edp->pll + QSERDES_V6_COM_LOCK_CMP2_MODE0); + + writel(0x0a, edp->pll + QSERDES_V6_COM_BG_TIMER); + writel(0x14, edp->pll + QSERDES_V6_COM_PLL_CORE_CLK_DIV_MODE0); + writel(0x00, edp->pll + QSERDES_V6_COM_VCO_TUNE_CTRL); + writel(0x1f, edp->pll + QSERDES_V6_COM_PLL_BIAS_EN_CLK_BUFLR_EN); + writel(0x0f, edp->pll + QSERDES_V6_COM_CORE_CLK_EN); + writel(0xa0, edp->pll + QSERDES_V6_COM_VCO_TUNE1_MODE0); + writel(0x03, edp->pll + QSERDES_V6_COM_VCO_TUNE2_MODE0); + + writel(code1_mode0, edp->pll + QSERDES_V6_COM_BIN_VCOCAL_CMP_CODE1_MODE0); + writel(code2_mode0, edp->pll + QSERDES_V6_COM_BIN_VCOCAL_CMP_CODE2_MODE0); return 0; } +static const struct phy_ver_ops qcom_edp_phy_ops_v6 = { + .com_power_on = qcom_edp_phy_power_on_v6, + .com_resetsm_cntrl = qcom_edp_phy_com_resetsm_cntrl_v6, + .com_bias_en_clkbuflr = qcom_edp_com_bias_en_clkbuflr_v6, + .com_configure_pll = qcom_edp_com_configure_pll_v6, + .com_configure_ssc = qcom_edp_com_configure_ssc_v6, +}; + +static struct qcom_edp_phy_cfg x1e80100_phy_cfg = { + .swing_pre_emph_cfg = &dp_phy_swing_pre_emph_cfg, + .ver_ops = &qcom_edp_phy_ops_v6, +}; + static int qcom_edp_phy_power_on(struct phy *phy) { const struct qcom_edp *edp = phy_get_drvdata(phy); u32 bias0_en, drvr0_en, bias1_en, drvr1_en; unsigned long pixel_freq; u8 ldo_config = 0x0; - int timeout; int ret; u32 val; u8 cfg1; - writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN | - DP_PHY_PD_CTL_LANE_0_1_PWRDN | DP_PHY_PD_CTL_LANE_2_3_PWRDN | - DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN, - edp->edp + DP_PHY_PD_CTL); - writel(0xfc, edp->edp + DP_PHY_MODE); - - timeout = readl_poll_timeout(edp->pll + QSERDES_V4_COM_CMN_STATUS, - val, val & BIT(7), 5, 200); - if (timeout) - return timeout; - + ret = edp->cfg->ver_ops->com_power_on(edp); + if (ret) + return ret; if (edp->cfg->swing_pre_emph_cfg && !edp->is_edp) ldo_config = 0x1; @@ -535,12 +770,9 @@ static int qcom_edp_phy_power_on(struct phy *phy) writel(0x01, edp->edp + DP_PHY_CFG); writel(0x09, edp->edp + DP_PHY_CFG); - writel(0x20, edp->pll + QSERDES_V4_COM_RESETSM_CNTRL); - - timeout = readl_poll_timeout(edp->pll + QSERDES_V4_COM_C_READY_STATUS, - val, val & BIT(0), 500, 10000); - if (timeout) - return timeout; + ret = edp->cfg->ver_ops->com_resetsm_cntrl(edp); + if (ret) + return ret; writel(0x19, edp->edp + DP_PHY_CFG); writel(0x1f, edp->tx0 + TXn_HIGHZ_DRVR_EN); @@ -880,6 +1112,7 @@ static const struct of_device_id qcom_edp_phy_match_table[] = { { .compatible = "qcom,sc8180x-edp-phy", .data = &sc7280_dp_phy_cfg, }, { .compatible = "qcom,sc8280xp-dp-phy", .data = &sc8280xp_dp_phy_cfg, }, { .compatible = "qcom,sc8280xp-edp-phy", .data = &sc8280xp_edp_phy_cfg, }, + { .compatible = "qcom,x1e80100-dp-phy", .data = &x1e80100_phy_cfg, }, { } }; MODULE_DEVICE_TABLE(of, qcom_edp_phy_match_table); |