diff options
Diffstat (limited to 'drivers/phy')
| -rw-r--r-- | drivers/phy/Kconfig | 11 | ||||
| -rw-r--r-- | drivers/phy/Makefile | 1 | ||||
| -rw-r--r-- | drivers/phy/phy-twl4030-usb.c | 844 |
3 files changed, 856 insertions, 0 deletions
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 38c3477ead4c..ac239aca77ec 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -27,4 +27,15 @@ config OMAP_USB2 The USB OTG controller communicates with the comparator using this driver. +config TWL4030_USB + tristate "TWL4030 USB Transceiver Driver" + depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS + select GENERIC_PHY + select USB_PHY + help + Enable this to support the USB OTG transceiver on TWL4030 + family chips (including the TWL5030 and TPS659x0 devices). + This transceiver supports high and full speed devices plus, + in host mode, low speed. + endmenu diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index ed5b088abaee..0dd8a9834548 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -4,3 +4,4 @@ obj-$(CONFIG_GENERIC_PHY) += phy-core.o obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o +obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o diff --git a/drivers/phy/phy-twl4030-usb.c b/drivers/phy/phy-twl4030-usb.c new file mode 100644 index 000000000000..d02913f9a6b1 --- /dev/null +++ b/drivers/phy/phy-twl4030-usb.c @@ -0,0 +1,844 @@ +/* + * twl4030_usb - TWL4030 USB transceiver, talking to OMAP OTG controller + * + * Copyright (C) 2004-2007 Texas Instruments + * Copyright (C) 2008 Nokia Corporation + * Contact: Felipe Balbi <felipe.balbi@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Current status: + * - HS USB ULPI mode works. + * - 3-pin mode support may be added in future. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/spinlock.h> +#include <linux/workqueue.h> +#include <linux/io.h> +#include <linux/delay.h> +#include <linux/usb/otg.h> +#include <linux/phy/phy.h> +#include <linux/usb/musb-omap.h> +#include <linux/usb/ulpi.h> +#include <linux/i2c/twl.h> +#include <linux/regulator/consumer.h> +#include <linux/err.h> +#include <linux/slab.h> + +/* Register defines */ + +#define MCPC_CTRL 0x30 +#define MCPC_CTRL_RTSOL (1 << 7) +#define MCPC_CTRL_EXTSWR (1 << 6) +#define MCPC_CTRL_EXTSWC (1 << 5) +#define MCPC_CTRL_VOICESW (1 << 4) +#define MCPC_CTRL_OUT64K (1 << 3) +#define MCPC_CTRL_RTSCTSSW (1 << 2) +#define MCPC_CTRL_HS_UART (1 << 0) + +#define MCPC_IO_CTRL 0x33 +#define MCPC_IO_CTRL_MICBIASEN (1 << 5) +#define MCPC_IO_CTRL_CTS_NPU (1 << 4) +#define MCPC_IO_CTRL_RXD_PU (1 << 3) +#define MCPC_IO_CTRL_TXDTYP (1 << 2) +#define MCPC_IO_CTRL_CTSTYP (1 << 1) +#define MCPC_IO_CTRL_RTSTYP (1 << 0) + +#define MCPC_CTRL2 0x36 +#define MCPC_CTRL2_MCPC_CK_EN (1 << 0) + +#define OTHER_FUNC_CTRL 0x80 +#define OTHER_FUNC_CTRL_BDIS_ACON_EN (1 << 4) +#define OTHER_FUNC_CTRL_FIVEWIRE_MODE (1 << 2) + +#define OTHER_IFC_CTRL 0x83 +#define OTHER_IFC_CTRL_OE_INT_EN (1 << 6) +#define OTHER_IFC_CTRL_CEA2011_MODE (1 << 5) +#define OTHER_IFC_CTRL_FSLSSERIALMODE_4PIN (1 << 4) +#define OTHER_IFC_CTRL_HIZ_ULPI_60MHZ_OUT (1 << 3) +#define OTHER_IFC_CTRL_HIZ_ULPI (1 << 2) +#define OTHER_IFC_CTRL_ALT_INT_REROUTE (1 << 0) + +#define OTHER_INT_EN_RISE 0x86 +#define OTHER_INT_EN_FALL 0x89 +#define OTHER_INT_STS 0x8C +#define OTHER_INT_LATCH 0x8D +#define OTHER_INT_VB_SESS_VLD (1 << 7) +#define OTHER_INT_DM_HI (1 << 6) /* not valid for "latch" reg */ +#define OTHER_INT_DP_HI (1 << 5) /* not valid for "latch" reg */ +#define OTHER_INT_BDIS_ACON (1 << 3) /* not valid for "fall" regs */ +#define OTHER_INT_MANU (1 << 1) +#define OTHER_INT_ABNORMAL_STRESS (1 << 0) + +#define ID_STATUS 0x96 +#define ID_RES_FLOAT (1 << 4) +#define ID_RES_440K (1 << 3) +#define ID_RES_200K (1 << 2) +#define ID_RES_102K (1 << 1) +#define ID_RES_GND (1 << 0) + +#define POWER_CTRL 0xAC +#define POWER_CTRL_OTG_ENAB (1 << 5) + +#define OTHER_IFC_CTRL2 0xAF +#define OTHER_IFC_CTRL2_ULPI_STP_LOW (1 << 4) +#define OTHER_IFC_CTRL2_ULPI_TXEN_POL (1 << 3) +#define OTHER_IFC_CTRL2_ULPI_4PIN_2430 (1 << 2) +#define OTHER_IFC_CTRL2_USB_INT_OUTSEL_MASK (3 << 0) /* bits 0 and 1 */ +#define OTHER_IFC_CTRL2_USB_INT_OUTSEL_INT1N (0 << 0) +#define OTHER_IFC_CTRL2_USB_INT_OUTSEL_INT2N (1 << 0) + +#define REG_CTRL_EN 0xB2 +#define REG_CTRL_ERROR 0xB5 +#define ULPI_I2C_CONFLICT_INTEN (1 << 0) + +#define OTHER_FUNC_CTRL2 0xB8 +#define OTHER_FUNC_CTRL2_VBAT_TIMER_EN (1 << 0) + +/* following registers do not have separate _clr and _set registers */ +#define VBUS_DEBOUNCE 0xC0 +#define ID_DEBOUNCE 0xC1 +#define VBAT_TIMER 0xD3 +#define PHY_PWR_CTRL 0xFD +#define PHY_PWR_PHYPWD (1 << 0) +#define PHY_CLK_CTRL 0xFE +#define PHY_CLK_CTRL_CLOCKGATING_EN (1 << 2) +#define PHY_CLK_CTRL_CLK32K_EN (1 << 1) +#define REQ_PHY_DPLL_CLK (1 << 0) +#define PHY_CLK_CTRL_STS 0xFF +#define PHY_DPLL_CLK (1 << 0) + +/* In module TWL_MODULE_PM_MASTER */ +#define STS_HW_CONDITIONS 0x0F + +/* In module TWL_MODULE_PM_RECEIVER */ +#define VUSB_DEDICATED1 0x7D +#define VUSB_DEDICATED2 0x7E +#define VUSB1V5_DEV_GRP 0x71 +#define VUSB1V5_TYPE 0x72 +#define VUSB1V5_REMAP 0x73 +#define VUSB1V8_DEV_GRP 0x74 +#define VUSB1V8_TYPE 0x75 +#define VUSB1V8_REMAP 0x76 +#define VUSB3V1_DEV_GRP 0x77 +#define VUSB3V1_TYPE 0x78 +#define VUSB3V1_REMAP 0x79 + +/* In module TWL4030_MODULE_INTBR */ +#define PMBR1 0x0D +#define GPIO_USB_4PIN_ULPI_2430C (3 << 0) + +struct twl4030_usb { + struct usb_phy phy; + struct device *dev; + + /* TWL4030 internal USB regulator supplies */ + struct regulator *usb1v5; + struct regulator *usb1v8; + struct regulator *usb3v1; + + /* for vbus reporting with irqs disabled */ + spinlock_t lock; + + /* pin configuration */ + enum twl4030_usb_mode usb_mode; + + int irq; + enum omap_musb_vbus_id_status linkstat; + bool vbus_supplied; + u8 asleep; + bool irq_enabled; + + struct delayed_work id_workaround_work; +}; + +/* internal define on top of container_of */ +#define phy_to_twl(x) container_of((x), struct twl4030_usb, phy) + +/*-------------------------------------------------------------------------*/ + +static int twl4030_i2c_write_u8_verify(struct twl4030_usb *twl, + u8 module, u8 data, u8 address) +{ + u8 check; + + if ((twl_i2c_write_u8(module, data, address) >= 0) && + (twl_i2c_read_u8(module, &check, address) >= 0) && + (check == data)) + return 0; + dev_dbg(twl->dev, "Write%d[%d,0x%x] wrote %02x but read %02x\n", + 1, module, address, check, data); + + /* Failed once: Try again */ + if ((twl_i2c_write_u8(module, data, address) >= 0) && + (twl_i2c_read_u8(module, &check, address) >= 0) && + (check == data)) + return 0; + dev_dbg(twl->dev, "Write%d[%d,0x%x] wrote %02x but read %02x\n", + 2, module, address, check, data); + + /* Failed again: Return error */ + return -EBUSY; +} + +#define twl4030_usb_write_verify(twl, address, data) \ + twl4030_i2c_write_u8_verify(twl, TWL_MODULE_USB, (data), (address)) + +static inline int twl4030_usb_write(struct twl4030_usb *twl, + u8 address, u8 data) +{ + int ret = 0; + + ret = twl_i2c_write_u8(TWL_MODULE_USB, data, address); + if (ret < 0) + dev_dbg(twl->dev, + "TWL4030:USB:Write[0x%x] Error %d\n", address, ret); + return ret; +} + +static inline int twl4030_readb(struct twl4030_usb *twl, u8 module, u8 address) +{ + u8 data; + int ret = 0; + + ret = twl_i2c_read_u8(module, &data, address); + if (ret >= 0) + ret = data; + else + dev_dbg(twl->dev, + "TWL4030:readb[0x%x,0x%x] Error %d\n", + module, address, ret); + + return ret; +} + +static inline int twl4030_usb_read(struct twl4030_usb *twl, u8 address) +{ + return twl4030_readb(twl, TWL_MODULE_USB, address); +} + +/*-------------------------------------------------------------------------*/ + +static inline int +twl4030_usb_set_bits(struct twl4030_usb *twl, u8 reg, u8 bits) +{ + return twl4030_usb_write(twl, ULPI_SET(reg), bits); +} + +static inline int +twl4030_usb_clear_bits(struct twl4030_usb *twl, u8 reg, u8 bits) +{ + return twl4030_usb_write(twl, ULPI_CLR(reg), bits); +} + +/*-------------------------------------------------------------------------*/ + +static bool twl4030_is_driving_vbus(struct twl4030_usb *twl) +{ + int ret; + + ret = twl4030_usb_read(twl, PHY_CLK_CTRL_STS); + if (ret < 0 || !(ret & PHY_DPLL_CLK)) + /* + * if clocks are off, registers are not updated, + * but we can assume we don't drive VBUS in this case + */ + return false; + + ret = twl4030_usb_read(twl, ULPI_OTG_CTRL); + if (ret < 0) + return false; + + return (ret & (ULPI_OTG_DRVVBUS | ULPI_OTG_CHRGVBUS)) ? true : false; +} + +static enum omap_musb_vbus_id_status + twl4030_usb_linkstat(struct twl4030_usb *twl) +{ + int status; + enum omap_musb_vbus_id_status linkstat = OMAP_MUSB_UNKNOWN; + + twl->vbus_supplied = false; + + /* + * For ID/VBUS sensing, see manual section 15.4.8 ... + * except when using only battery backup power, two + * comparators produce VBUS_PRES and ID_PRES signals, + * which don't match docs elsewhere. But ... BIT(7) + * and BIT(2) of STS_HW_CONDITIONS, respectively, do + * seem to match up. If either is true the USB_PRES + * signal is active, the OTG module is activated, and + * its interrupt may be raised (may wake the system). + */ + status = twl4030_readb(twl, TWL_MODULE_PM_MASTER, STS_HW_CONDITIONS); + if (status < 0) + dev_err(twl->dev, "USB link status err %d\n", status); + else if (status & (BIT(7) | BIT(2))) { + if (status & BIT(7)) { + if (twl4030_is_driving_vbus(twl)) + status &= ~BIT(7); + else + twl->vbus_supplied = true; + } + + if (status & BIT(2)) + linkstat = OMAP_MUSB_ID_GROUND; + else if (status & BIT(7)) + linkstat = OMAP_MUSB_VBUS_VALID; + else + linkstat = OMAP_MUSB_VBUS_OFF; + } else { + if (twl->linkstat != OMAP_MUSB_UNKNOWN) + linkstat = OMAP_MUSB_VBUS_OFF; + } + + dev_dbg(twl->dev, "HW_CONDITIONS 0x%02x/%d; link %d\n", + status, status, linkstat); + + /* REVISIT this assumes host and peripheral controllers + * are registered, and that both are active... + */ + + return linkstat; +} + +static void twl4030_usb_set_mode(struct twl4030_usb *twl, int mode) +{ + twl->usb_mode = mode; + + switch (mode) { + case T2_USB_MODE_ULPI: + twl4030_usb_clear_bits(twl, ULPI_IFC_CTRL, + ULPI_IFC_CTRL_CARKITMODE); + twl4030_usb_set_bits(twl, POWER_CTRL, POWER_CTRL_OTG_ENAB); + twl4030_usb_clear_bits(twl, ULPI_FUNC_CTRL, + ULPI_FUNC_CTRL_XCVRSEL_MASK | + ULPI_FUNC_CTRL_OPMODE_MASK); + break; + case -1: + /* FIXME: power on defaults */ + break; + default: + dev_err(twl->dev, "unsupported T2 transceiver mode %d\n", + mode); + break; + }; +} + +static void twl4030_i2c_access(struct twl4030_usb *twl, int on) +{ + unsigned long timeout; + int val = twl4030_usb_read(twl, PHY_CLK_CTRL); + + if (val >= 0) { + if (on) { + /* enable DPLL to access PHY registers over I2C */ + val |= REQ_PHY_DPLL_CLK; + WARN_ON(twl4030_usb_write_verify(twl, PHY_CLK_CTRL, + (u8)val) < 0); + + timeout = jiffies + HZ; + while (!(twl4030_usb_read(twl, PHY_CLK_CTRL_STS) & + PHY_DPLL_CLK) + && time_before(jiffies, timeout)) + udelay(10); + if (!(twl4030_usb_read(twl, PHY_CLK_CTRL_STS) & + PHY_DPLL_CLK)) + dev_err(twl->dev, "Timeout setting T2 HSUSB " + "PHY DPLL clock\n"); + } else { + /* let ULPI control the DPLL clock */ + val &= ~REQ_PHY_DPLL_CLK; + WARN_ON(twl4030_usb_write_verify(twl, PHY_CLK_CTRL, + (u8)val) < 0); + } + } +} + +static void __twl4030_phy_power(struct twl4030_usb *twl, int on) +{ + u8 pwr = twl4030_usb_read(twl, PHY_PWR_CTRL); + + if (on) + pwr &= ~PHY_PWR_PHYPWD; + else + pwr |= PHY_PWR_PHYPWD; + + WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0); +} + +static void twl4030_phy_power(struct twl4030_usb *twl, int on) +{ + int ret; + + if (on) { + ret = regulator_enable(twl->usb3v1); + if (ret) + dev_err(twl->dev, "Failed to enable usb3v1\n"); + + ret = regulator_enable(twl->usb1v8); + if (ret) + dev_err(twl->dev, "Failed to enable usb1v8\n"); + + /* + * Disabling usb3v1 regulator (= writing 0 to VUSB3V1_DEV_GRP + * in twl4030) resets the VUSB_DEDICATED2 register. This reset + * enables VUSB3V1_SLEEP bit that remaps usb3v1 ACTIVE state to + * SLEEP. We work around this by clearing the bit after usv3v1 + * is re-activated. This ensures that VUSB3V1 is really active. + */ + twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2); + + ret = regulator_enable(twl->usb1v5); + if (ret) + dev_err(twl->dev, "Failed to enable usb1v5\n"); + + __twl4030_phy_power(twl, 1); + twl4030_usb_write(twl, PHY_CLK_CTRL, + twl4030_usb_read(twl, PHY_CLK_CTRL) | + (PHY_CLK_CTRL_CLOCKGATING_EN | + PHY_CLK_CTRL_CLK32K_EN)); + } else { + __twl4030_phy_power(twl, 0); + regulator_disable(twl->usb1v5); + regulator_disable(twl->usb1v8); + regulator_disable(twl->usb3v1); + } +} + +static void twl4030_phy_suspend(struct twl4030_usb *twl, int controller_off) +{ + if (twl->asleep) + return; + + twl4030_phy_power(twl, 0); + twl->asleep = 1; + dev_dbg(twl->dev, "%s\n", __func__); +} + +static int twl4030_phy_power_off(struct phy *phy) +{ + struct twl4030_usb *twl = phy_get_drvdata(phy); + + twl4030_phy_suspend(twl, 0); + return 0; +} + +static void __twl4030_phy_resume(struct twl4030_usb *twl) +{ + twl4030_phy_power(twl, 1); + twl4030_i2c_access(twl, 1); + twl4030_usb_set_mode(twl, twl->usb_mode); + if (twl->usb_mode == T2_USB_MODE_ULPI) + twl4030_i2c_access(twl, 0); +} + +static void twl4030_phy_resume(struct twl4030_usb *twl) +{ + if (!twl->asleep) + return; + __twl4030_phy_resume(twl); + twl->asleep = 0; + dev_dbg(twl->dev, "%s\n", __func__); + + /* + * XXX When VBUS gets driven after musb goes to A mode, + * ID_PRES related interrupts no longer arrive, why? + * Register itself is updated fine though, so we must poll. + */ + if (twl->linkstat == OMAP_MUSB_ID_GROUND) { + cancel_delayed_work(&twl->id_workaround_work); + schedule_delayed_work(&twl->id_workaround_work, HZ); + } +} + +static int twl4030_phy_power_on(struct phy *phy) +{ + struct twl4030_usb *twl = phy_get_drvdata(phy); + + twl4030_phy_resume(twl); + return 0; +} + +static int twl4030_usb_ldo_init(struct twl4030_usb *twl) +{ + /* Enable writing to power configuration registers */ + twl_i2c_write_u8(TWL_MODULE_PM_MASTER, TWL4030_PM_MASTER_KEY_CFG1, + TWL4030_PM_MASTER_PROTECT_KEY); + + twl_i2c_write_u8(TWL_MODULE_PM_MASTER, TWL4030_PM_MASTER_KEY_CFG2, + TWL4030_PM_MASTER_PROTECT_KEY); + + /* Keep VUSB3V1 LDO in sleep state until VBUS/ID change detected*/ + /*twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2);*/ + + /* input to VUSB3V1 LDO is from VBAT, not VBUS */ + twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0x14, VUSB_DEDICATED1); + + /* Initialize 3.1V regulator */ + twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB3V1_DEV_GRP); + + twl->usb3v1 = devm_regulator_get(twl->dev, "usb3v1"); + if (IS_ERR(twl->usb3v1)) + return -ENODEV; + + twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB3V1_TYPE); + + /* Initialize 1.5V regulator */ + twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V5_DEV_GRP); + + twl->usb1v5 = devm_regulator_get(twl->dev, "usb1v5"); + if (IS_ERR(twl->usb1v5)) + return -ENODEV; + + twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V5_TYPE); + + /* Initialize 1.8V regulator */ + twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V8_DEV_GRP); + + twl->usb1v8 = devm_regulator_get(twl->dev, "usb1v8"); + if (IS_ERR(twl->usb1v8)) + return -ENODEV; + + twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V8_TYPE); + + /* disable access to power configuration registers */ + twl_i2c_write_u8(TWL_MODULE_PM_MASTER, 0, + TWL4030_PM_MASTER_PROTECT_KEY); + + return 0; +} + +static ssize_t twl4030_usb_vbus_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct twl4030_usb *twl = dev_get_drvdata(dev); + unsigned long flags; + int ret = -EINVAL; + + spin_lock_irqsave(&twl->lock, flags); + ret = sprintf(buf, "%s\n", + twl->vbus_supplied ? "on" : "off"); + spin_unlock_irqrestore(&twl->lock, flags); + + return ret; +} +static DEVICE_ATTR(vbus, 0444, twl4030_usb_vbus_show, NULL); + +static irqreturn_t twl4030_usb_irq(int irq, void *_twl) +{ + struct twl4030_usb *twl = _twl; + enum omap_musb_vbus_id_status status; + bool status_changed = false; + + status = twl4030_usb_linkstat(twl); + + spin_lock_irq(&twl->lock); + if (status >= 0 && status != twl->linkstat) { + twl->linkstat = status; + status_changed = true; + } + spin_unlock_irq(&twl->lock); + + if (status_changed) { + /* FIXME add a set_power() method so that B-devices can + * configure the charger appropriately. It's not always + * correct to consume VBUS power, and how much current to + * consume is a function of the USB configuration chosen + * by the host. + * + * REVISIT usb_gadget_vbus_connect(...) as needed, ditto + * its disconnect() sibling, when changing to/from the + * USB_LINK_VBUS state. musb_hdrc won't care until it + * starts to handle softconnect right. + */ + omap_musb_mailbox(status); + } + sysfs_notify(&twl->dev->kobj, NULL, "vbus"); + + return IRQ_HANDLED; +} + +static void twl4030_id_workaround_work(struct work_struct *work) +{ + struct twl4030_usb *twl = container_of(work, struct twl4030_usb, + id_workaround_work.work); + enum omap_musb_vbus_id_status status; + bool status_changed = false; + + status = twl4030_usb_linkstat(twl); + + spin_lock_irq(&twl->lock); + if (status >= 0 && status != twl->linkstat) { + twl->linkstat = status; + status_changed = true; + } + spin_unlock_irq(&twl->lock); + + if (status_changed) { + dev_dbg(twl->dev, "handle missing status change to %d\n", + status); + omap_musb_mailbox(status); + } + + /* don't schedule during sleep - irq works right then */ + if (status == OMAP_MUSB_ID_GROUND && !twl->asleep) { + cancel_delayed_work(&twl->id_workaround_work); + schedule_delayed_work(&twl->id_workaround_work, HZ); + } +} + +static int twl4030_usb_phy_init(struct usb_phy *phy) +{ + struct twl4030_usb *twl = phy_to_twl(phy); + enum omap_musb_vbus_id_status status; + + /* + * Start in sleep state, we'll get called through set_suspend() + * callback when musb is runtime resumed and it's time to start. + */ + __twl4030_phy_power(twl, 0); + twl->asleep = 1; + + status = twl4030_usb_linkstat(twl); + twl->linkstat = status; + + if (status == OMAP_MUSB_ID_GROUND || status == OMAP_MUSB_VBUS_VALID) { + omap_musb_mailbox(twl->linkstat); + twl4030_phy_resume(twl); + } + + sysfs_notify(&twl->dev->kobj, NULL, "vbus"); + return 0; +} + +static int twl4030_phy_init(struct phy *phy) +{ + struct twl4030_usb *twl = phy_get_drvdata(phy); + + return twl4030_usb_phy_init(&twl->phy); +} + +static int twl4030_set_suspend(struct usb_phy *x, int suspend) +{ + struct twl4030_usb *twl = phy_to_twl(x); + + if (suspend) + twl4030_phy_suspend(twl, 1); + else + twl4030_phy_resume(twl); + + return 0; +} + +static int twl4030_set_peripheral(struct usb_otg *otg, + struct usb_gadget *gadget) +{ + if (!otg) + return -ENODEV; + + otg->gadget = gadget; + if (!gadget) + otg->phy->state = OTG_STATE_UNDEFINED; + + return 0; +} + +static int twl4030_set_host(struct usb_otg *otg, struct usb_bus *host) +{ + if (!otg) + return -ENODEV; + + otg->host = host; + if (!host) + otg->phy->state = OTG_STATE_UNDEFINED; + + return 0; +} + +static const struct phy_ops ops = { + .init = twl4030_phy_init, + .power_on = twl4030_phy_power_on, + .power_off = twl4030_phy_power_off, + .owner = THIS_MODULE, +}; + +static int twl4030_usb_probe(struct platform_device *pdev) +{ + struct twl4030_usb_data *pdata = dev_get_platdata(&pdev->dev); + struct twl4030_usb *twl; + struct phy *phy; + int status, err; + struct usb_otg *otg; + struct device_node *np = pdev->dev.of_node; + struct phy_provider *phy_provider; + struct phy_init_data *init_data = NULL; + + twl = devm_kzalloc(&pdev->dev, sizeof *twl, GFP_KERNEL); + if (!twl) + return -ENOMEM; + + if (np) + of_property_read_u32(np, "usb_mode", + (enum twl4030_usb_mode *)&twl->usb_mode); + else if (pdata) { + twl->usb_mode = pdata->usb_mode; + init_data = pdata->init_data; + } else { + dev_err(&pdev->dev, "twl4030 initialized without pdata\n"); + return -EINVAL; + } + + otg = devm_kzalloc(&pdev->dev, sizeof *otg, GFP_KERNEL); + if (!otg) + return -ENOMEM; + + twl->dev = &pdev->dev; + twl->irq = platform_get_irq(pdev, 0); + twl->vbus_supplied = false; + twl->asleep = 1; + twl->linkstat = OMAP_MUSB_UNKNOWN; + + twl->phy.dev = twl->dev; + twl->phy.label = "twl4030"; + twl->phy.otg = otg; + twl->phy.type = USB_PHY_TYPE_USB2; + twl->phy.set_suspend = twl4030_set_suspend; + twl->phy.init = twl4030_usb_phy_init; + + otg->phy = &twl->phy; + otg->set_host = twl4030_set_host; + otg->set_peripheral = twl4030_set_peripheral; + + phy_provider = devm_of_phy_provider_register(twl->dev, + of_phy_simple_xlate); + if (IS_ERR(phy_provider)) + return PTR_ERR(phy_provider); + + phy = devm_phy_create(twl->dev, &ops, init_data); + if (IS_ERR(phy)) { + dev_dbg(&pdev->dev, "Failed to create PHY\n"); + return PTR_ERR(phy); + } + + phy_set_drvdata(phy, twl); + + /* init spinlock for workqueue */ + spin_lock_init(&twl->lock); + + INIT_DELAYED_WORK(&twl->id_workaround_work, twl4030_id_workaround_work); + + err = twl4030_usb_ldo_init(twl); + if (err) { + dev_err(&pdev->dev, "ldo init failed\n"); + return err; + } + usb_add_phy_dev(&twl->phy); + + platform_set_drvdata(pdev, twl); + if (device_create_file(&pdev->dev, &dev_attr_vbus)) + dev_warn(&pdev->dev, "could not create sysfs file\n"); + + /* Our job is to use irqs and status from the power module + * to keep the transceiver disabled when nothing's connected. + * + * FIXME we actually shouldn't start enabling it until the + * USB controller drivers have said they're ready, by calling + * set_host() and/or set_peripheral() ... OTG_capable boards + * need both handles, otherwise just one suffices. + */ + twl->irq_enabled = true; + status = devm_request_threaded_irq(twl->dev, twl->irq, NULL, + twl4030_usb_irq, IRQF_TRIGGER_FALLING | + IRQF_TRIGGER_RISING | IRQF_ONESHOT, "twl4030_usb", twl); + if (status < 0) { + dev_dbg(&pdev->dev, "can't get IRQ %d, err %d\n", + twl->irq, status); + return status; + } + + dev_info(&pdev->dev, "Initialized TWL4030 USB module\n"); + return 0; +} + +static int twl4030_usb_remove(struct platform_device *pdev) +{ + struct twl4030_usb *twl = platform_get_drvdata(pdev); + int val; + + cancel_delayed_work(&twl->id_workaround_work); + device_remove_file(twl->dev, &dev_attr_vbus); + + /* set transceiver mode to power on defaults */ + twl4030_usb_set_mode(twl, -1); + + /* autogate 60MHz ULPI clock, + * clear dpll clock request for i2c access, + * disable 32KHz + */ + val = twl4030_usb_read(twl, PHY_CLK_CTRL); + if (val >= 0) { + val |= PHY_CLK_CTRL_CLOCKGATING_EN; + val &= ~(PHY_CLK_CTRL_CLK32K_EN | REQ_PHY_DPLL_CLK); + twl4030_usb_write(twl, PHY_CLK_CTRL, (u8)val); + } + + /* disable complete OTG block */ + twl4030_usb_clear_bits(twl, POWER_CTRL, POWER_CTRL_OTG_ENAB); + + if (!twl->asleep) + twl4030_phy_power(twl, 0); + + return 0; +} + +#ifdef CONFIG_OF +static const struct of_device_id twl4030_usb_id_table[] = { + { .compatible = "ti,twl4030-usb" }, + {} +}; +MODULE_DEVICE_TABLE(of, twl4030_usb_id_table); +#endif + +static struct platform_driver twl4030_usb_driver = { + .probe = twl4030_usb_probe, + .remove = twl4030_usb_remove, + .driver = { + .name = "twl4030_usb", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(twl4030_usb_id_table), + }, +}; + +static int __init twl4030_usb_init(void) +{ + return platform_driver_register(&twl4030_usb_driver); +} +subsys_initcall(twl4030_usb_init); + +static void __exit twl4030_usb_exit(void) +{ + platform_driver_unregister(&twl4030_usb_driver); +} +module_exit(twl4030_usb_exit); + +MODULE_ALIAS("platform:twl4030_usb"); +MODULE_AUTHOR("Texas Instruments, Inc, Nokia Corporation"); +MODULE_DESCRIPTION("TWL4030 USB transceiver driver"); +MODULE_LICENSE("GPL"); |