diff options
Diffstat (limited to 'drivers/regulator/Kconfig')
| -rw-r--r-- | drivers/regulator/Kconfig | 299 |
1 files changed, 169 insertions, 130 deletions
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 7a61b17ddd04..a229de98ae6f 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -74,13 +74,72 @@ config REGULATOR_GPIO and the platform has to provide a mapping of GPIO-states to target volts/amps. -config REGULATOR_BQ24022 - tristate "TI bq24022 Dual Input 1-Cell Li-Ion Charger IC" +config REGULATOR_AD5398 + tristate "Analog Devices AD5398/AD5821 regulators" + depends on I2C help - This driver controls a TI bq24022 Charger attached via - GPIOs. The provided current regulator can enable/disable - charging select between 100 mA and 500 mA charging current - limit. + This driver supports AD5398 and AD5821 current regulator chips. + If building into module, its name is ad5398.ko. + +config REGULATOR_AAT2870 + tristate "AnalogicTech AAT2870 Regulators" + depends on MFD_AAT2870_CORE + help + If you have a AnalogicTech AAT2870 say Y to enable the + regulator driver. + +config REGULATOR_DA903X + tristate "Dialog Semiconductor DA9030/DA9034 regulators" + depends on PMIC_DA903X + help + Say y here to support the BUCKs and LDOs regulators found on + Dialog Semiconductor DA9030/DA9034 PMIC. + +config REGULATOR_DA9052 + tristate "Dialog Semiconductor DA9052/DA9053 regulators" + depends on PMIC_DA9052 + help + This driver supports the voltage regulators of DA9052-BC and + DA9053-AA/Bx PMIC. + +config REGULATOR_ANATOP + tristate "Freescale i.MX on-chip ANATOP LDO regulators" + depends on MFD_ANATOP + help + Say y here to support Freescale i.MX on-chip ANATOP LDOs + regulators. It is recommended that this option be + enabled on i.MX6 platform. + +config REGULATOR_MC13XXX_CORE + tristate + +config REGULATOR_MC13783 + tristate "Freescale MC13783 regulator driver" + depends on MFD_MC13783 + select REGULATOR_MC13XXX_CORE + help + Say y here to support the regulators found on the Freescale MC13783 + PMIC. + +config REGULATOR_MC13892 + tristate "Freescale MC13892 regulator driver" + depends on MFD_MC13XXX + select REGULATOR_MC13XXX_CORE + help + Say y here to support the regulators found on the Freescale MC13892 + PMIC. + +config REGULATOR_ISL6271A + tristate "Intersil ISL6271A Power regulator" + depends on I2C + help + This driver supports ISL6271A voltage regulator chip. + +config REGULATOR_88PM8607 + bool "Marvell 88PM8607 Power regulators" + depends on MFD_88PM860X=y + help + This driver supports 88PM8607 voltage regulator chips. config REGULATOR_MAX1586 tristate "Maxim 1586/1587 voltage regulator" @@ -136,61 +195,12 @@ config REGULATOR_MAX8998 via I2C bus. The provided regulator is suitable for S3C6410 and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages. -config REGULATOR_TWL4030 - bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC" - depends on TWL4030_CORE - help - This driver supports the voltage regulators provided by - this family of companion chips. - -config REGULATOR_WM831X - tristate "Wolfson Microelcronics WM831x PMIC regulators" - depends on MFD_WM831X - help - Support the voltage and current regulators of the WM831x series - of PMIC devices. - -config REGULATOR_WM8350 - tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC" - depends on MFD_WM8350 - help - This driver provides support for the voltage and current regulators - of the WM8350 AudioPlus PMIC. - -config REGULATOR_WM8400 - tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC" - depends on MFD_WM8400 - help - This driver provides support for the voltage regulators of the - WM8400 AudioPlus PMIC. - -config REGULATOR_WM8994 - tristate "Wolfson Microelectronics WM8994 CODEC" - depends on MFD_WM8994 - help - This driver provides support for the voltage regulators on the - WM8994 CODEC. - -config REGULATOR_DA903X - tristate "Support regulators on Dialog Semiconductor DA9030/DA9034 PMIC" - depends on PMIC_DA903X - help - Say y here to support the BUCKs and LDOs regulators found on - Dialog Semiconductor DA9030/DA9034 PMIC. - -config REGULATOR_DA9052 - tristate "Dialog DA9052/DA9053 regulators" - depends on PMIC_DA9052 - help - This driver supports the voltage regulators of DA9052-BC and - DA9053-AA/Bx PMIC. - -config REGULATOR_PCF50633 - tristate "PCF50633 regulator driver" - depends on MFD_PCF50633 +config REGULATOR_PCAP + tristate "Motorola PCAP2 regulator driver" + depends on EZX_PCAP help - Say Y here to support the voltage regulators and convertors - on PCF50633 + This driver provides support for the voltage regulators of the + PCAP2 PMIC. config REGULATOR_LP3971 tristate "National Semiconductors LP3971 PMIC regulator driver" @@ -206,31 +216,20 @@ config REGULATOR_LP3972 Say Y here to support the voltage regulators and convertors on National Semiconductors LP3972 PMIC -config REGULATOR_PCAP - tristate "PCAP2 regulator driver" - depends on EZX_PCAP - help - This driver provides support for the voltage regulators of the - PCAP2 PMIC. - -config REGULATOR_MC13XXX_CORE - tristate - -config REGULATOR_MC13783 - tristate "Support regulators on Freescale MC13783 PMIC" - depends on MFD_MC13783 - select REGULATOR_MC13XXX_CORE +config REGULATOR_PCF50633 + tristate "NXP PCF50633 regulator driver" + depends on MFD_PCF50633 help - Say y here to support the regulators found on the Freescale MC13783 - PMIC. + Say Y here to support the voltage regulators and convertors + on PCF50633 -config REGULATOR_MC13892 - tristate "Support regulators on Freescale MC13892 PMIC" - depends on MFD_MC13XXX - select REGULATOR_MC13XXX_CORE +config REGULATOR_S5M8767 + tristate "Samsung S5M8767A voltage regulator" + depends on MFD_S5M_CORE help - Say y here to support the regulators found on the Freescale MC13892 - PMIC. + This driver supports a Samsung S5M8767A voltage output regulator + via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and + supports DVS mode with 8bits of output voltage control. config REGULATOR_AB3100 tristate "ST-Ericsson AB3100 Regulator functions" @@ -241,6 +240,32 @@ config REGULATOR_AB3100 AB3100 analog baseband dealing with power regulators for the system. +config REGULATOR_AB8500 + bool "ST-Ericsson AB8500 Power Regulators" + depends on AB8500_CORE + help + This driver supports the regulators found on the ST-Ericsson mixed + signal AB8500 PMIC + +config REGULATOR_DBX500_PRCMU + bool + +config REGULATOR_DB8500_PRCMU + bool "ST-Ericsson DB8500 Voltage Domain Regulators" + depends on MFD_DB8500_PRCMU + select REGULATOR_DBX500_PRCMU + help + This driver supports the voltage domain regulators controlled by the + DB8500 PRCMU + +config REGULATOR_BQ24022 + tristate "TI bq24022 Dual Input 1-Cell Li-Ion Charger IC" + help + This driver controls a TI bq24022 Charger attached via + GPIOs. The provided current regulator can enable/disable + charging select between 100 mA and 500 mA charging current + limit. + config REGULATOR_TPS6105X tristate "TI TPS6105X Power regulators" depends on TPS6105X @@ -250,6 +275,16 @@ config REGULATOR_TPS6105X It is a single boost converter primarily for white LEDs and audio amplifiers. +config REGULATOR_TPS62360 + tristate "TI TPS62360 Power Regulator" + depends on I2C + select REGMAP_I2C + help + This driver supports TPS62360 voltage regulator chip. This + regulator is meant for processor core supply. This chip is + high-frequency synchronous step down dc-dc converter optimized + for battery-powered portable applications. + config REGULATOR_TPS65023 tristate "TI TPS65023 Power regulators" depends on I2C @@ -267,73 +302,77 @@ config REGULATOR_TPS6507X three step-down converters and two general-purpose LDO voltage regulators. It supports TI's software based Class-2 SmartReflex implementation. -config REGULATOR_TPS65912 - tristate "TI TPS65912 Power regulator" - depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI) +config REGULATOR_TPS65217 + tristate "TI TPS65217 Power regulators" + depends on MFD_TPS65217 help - This driver supports TPS65912 voltage regulator chip. + This driver supports TPS65217 voltage regulator chips. TPS65217 + provides three step-down converters and four general-purpose LDO + voltage regulators. It supports software based voltage control + for different voltage domains -config REGULATOR_88PM8607 - bool "Marvell 88PM8607 Power regulators" - depends on MFD_88PM860X=y +config REGULATOR_TPS6524X + tristate "TI TPS6524X Power regulators" + depends on SPI help - This driver supports 88PM8607 voltage regulator chips. + This driver supports TPS6524X voltage regulator chips. TPS6524X + provides three step-down converters and two general-purpose LDO + voltage regulators. This device is interfaced using a customized + serial interface currently supported on the sequencer serial + port controller. -config REGULATOR_ISL6271A - tristate "Intersil ISL6271A Power regulator" - depends on I2C +config REGULATOR_TPS6586X + tristate "TI TPS6586X Power regulators" + depends on MFD_TPS6586X help - This driver supports ISL6271A voltage regulator chip. + This driver supports TPS6586X voltage regulator chips. -config REGULATOR_AD5398 - tristate "Analog Devices AD5398/AD5821 regulators" - depends on I2C +config REGULATOR_TPS65910 + tristate "TI TPS65910/TPS65911 Power Regulators" + depends on MFD_TPS65910 help - This driver supports AD5398 and AD5821 current regulator chips. - If building into module, its name is ad5398.ko. + This driver supports TPS65910/TPS65911 voltage regulator chips. -config REGULATOR_AB8500 - bool "ST-Ericsson AB8500 Power Regulators" - depends on AB8500_CORE +config REGULATOR_TPS65912 + tristate "TI TPS65912 Power regulator" + depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI) help - This driver supports the regulators found on the ST-Ericsson mixed - signal AB8500 PMIC + This driver supports TPS65912 voltage regulator chip. -config REGULATOR_DB8500_PRCMU - bool "ST-Ericsson DB8500 Voltage Domain Regulators" - depends on MFD_DB8500_PRCMU +config REGULATOR_TWL4030 + bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC" + depends on TWL4030_CORE help - This driver supports the voltage domain regulators controlled by the - DB8500 PRCMU + This driver supports the voltage regulators provided by + this family of companion chips. -config REGULATOR_TPS6586X - tristate "TI TPS6586X Power regulators" - depends on MFD_TPS6586X +config REGULATOR_WM831X + tristate "Wolfson Microelectronics WM831x PMIC regulators" + depends on MFD_WM831X help - This driver supports TPS6586X voltage regulator chips. + Support the voltage and current regulators of the WM831x series + of PMIC devices. -config REGULATOR_TPS6524X - tristate "TI TPS6524X Power regulators" - depends on SPI +config REGULATOR_WM8350 + tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC" + depends on MFD_WM8350 help - This driver supports TPS6524X voltage regulator chips. TPS6524X - provides three step-down converters and two general-purpose LDO - voltage regulators. This device is interfaced using a customized - serial interface currently supported on the sequencer serial - port controller. + This driver provides support for the voltage and current regulators + of the WM8350 AudioPlus PMIC. -config REGULATOR_TPS65910 - tristate "TI TPS65910 Power Regulator" - depends on MFD_TPS65910 +config REGULATOR_WM8400 + tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC" + depends on MFD_WM8400 help - This driver supports TPS65910 voltage regulator chips. + This driver provides support for the voltage regulators of the + WM8400 AudioPlus PMIC. -config REGULATOR_AAT2870 - tristate "AnalogicTech AAT2870 Regulators" - depends on MFD_AAT2870_CORE +config REGULATOR_WM8994 + tristate "Wolfson Microelectronics WM8994 CODEC" + depends on MFD_WM8994 help - If you have a AnalogicTech AAT2870 say Y to enable the - regulator driver. + This driver provides support for the voltage regulators on the + WM8994 CODEC. endif |