diff options
Diffstat (limited to 'drivers/reset')
| -rw-r--r-- | drivers/reset/reset-npcm.c | 211 |
1 files changed, 173 insertions, 38 deletions
diff --git a/drivers/reset/reset-npcm.c b/drivers/reset/reset-npcm.c index b08f8d8a1d63..24c55efa98e5 100644 --- a/drivers/reset/reset-npcm.c +++ b/drivers/reset/reset-npcm.c @@ -17,13 +17,20 @@ /* NPCM7xx GCR registers */ #define NPCM_MDLR_OFFSET 0x7C -#define NPCM_MDLR_USBD0 BIT(9) -#define NPCM_MDLR_USBD1 BIT(8) -#define NPCM_MDLR_USBD2_4 BIT(21) -#define NPCM_MDLR_USBD5_9 BIT(22) +#define NPCM7XX_MDLR_USBD0 BIT(9) +#define NPCM7XX_MDLR_USBD1 BIT(8) +#define NPCM7XX_MDLR_USBD2_4 BIT(21) +#define NPCM7XX_MDLR_USBD5_9 BIT(22) + +/* NPCM8xx MDLR bits */ +#define NPCM8XX_MDLR_USBD0_3 BIT(9) +#define NPCM8XX_MDLR_USBD4_7 BIT(22) +#define NPCM8XX_MDLR_USBD8 BIT(24) +#define NPCM8XX_MDLR_USBD9 BIT(21) #define NPCM_USB1PHYCTL_OFFSET 0x140 #define NPCM_USB2PHYCTL_OFFSET 0x144 +#define NPCM_USB3PHYCTL_OFFSET 0x148 #define NPCM_USBXPHYCTL_RS BIT(28) /* NPCM7xx Reset registers */ @@ -49,12 +56,38 @@ #define NPCM_IPSRST3_USBPHY1 BIT(24) #define NPCM_IPSRST3_USBPHY2 BIT(25) +#define NPCM_IPSRST4 0x74 +#define NPCM_IPSRST4_USBPHY3 BIT(25) +#define NPCM_IPSRST4_USB_HOST2 BIT(31) + #define NPCM_RC_RESETS_PER_REG 32 #define NPCM_MASK_RESETS GENMASK(4, 0) +enum { + BMC_NPCM7XX = 0, + BMC_NPCM8XX, +}; + +static const u32 npxm7xx_ipsrst[] = {NPCM_IPSRST1, NPCM_IPSRST2, NPCM_IPSRST3}; +static const u32 npxm8xx_ipsrst[] = {NPCM_IPSRST1, NPCM_IPSRST2, NPCM_IPSRST3, + NPCM_IPSRST4}; + +struct npcm_reset_info { + u32 bmc_id; + u32 num_ipsrst; + const u32 *ipsrst; +}; + +static const struct npcm_reset_info npxm7xx_reset_info[] = { + {.bmc_id = BMC_NPCM7XX, .num_ipsrst = 3, .ipsrst = npxm7xx_ipsrst}}; +static const struct npcm_reset_info npxm8xx_reset_info[] = { + {.bmc_id = BMC_NPCM8XX, .num_ipsrst = 4, .ipsrst = npxm8xx_ipsrst}}; + struct npcm_rc_data { struct reset_controller_dev rcdev; struct notifier_block restart_nb; + const struct npcm_reset_info *info; + struct regmap *gcr_regmap; u32 sw_reset_number; void __iomem *base; spinlock_t lock; @@ -120,14 +153,24 @@ static int npcm_rc_status(struct reset_controller_dev *rcdev, static int npcm_reset_xlate(struct reset_controller_dev *rcdev, const struct of_phandle_args *reset_spec) { + struct npcm_rc_data *rc = to_rc_data(rcdev); unsigned int offset, bit; + bool offset_found = false; + int off_num; offset = reset_spec->args[0]; - if (offset != NPCM_IPSRST1 && offset != NPCM_IPSRST2 && - offset != NPCM_IPSRST3) { + for (off_num = 0 ; off_num < rc->info->num_ipsrst ; off_num++) { + if (offset == rc->info->ipsrst[off_num]) { + offset_found = true; + break; + } + } + + if (!offset_found) { dev_err(rcdev->dev, "Error reset register (0x%x)\n", offset); return -EINVAL; } + bit = reset_spec->args[1]; if (bit >= NPCM_RC_RESETS_PER_REG) { dev_err(rcdev->dev, "Error reset number (%d)\n", bit); @@ -138,49 +181,29 @@ static int npcm_reset_xlate(struct reset_controller_dev *rcdev, } static const struct of_device_id npcm_rc_match[] = { - { .compatible = "nuvoton,npcm750-reset" }, + { .compatible = "nuvoton,npcm750-reset", .data = &npxm7xx_reset_info}, + { .compatible = "nuvoton,npcm845-reset", .data = &npxm8xx_reset_info}, { } }; -/* - * The following procedure should be observed in USB PHY, USB device and - * USB host initialization at BMC boot - */ -static int npcm_usb_reset(struct platform_device *pdev, struct npcm_rc_data *rc) +static void npcm_usb_reset_npcm7xx(struct npcm_rc_data *rc) { u32 mdlr, iprst1, iprst2, iprst3; - struct device *dev = &pdev->dev; - struct regmap *gcr_regmap; u32 ipsrst1_bits = 0; u32 ipsrst2_bits = NPCM_IPSRST2_USB_HOST; u32 ipsrst3_bits = 0; - const char *gcr_dt; - - gcr_dt = (const char *) - of_match_device(dev->driver->of_match_table, dev)->data; - - gcr_regmap = syscon_regmap_lookup_by_phandle(dev->of_node, "nuvoton,sysgcr"); - if (IS_ERR(gcr_regmap)) { - dev_warn(&pdev->dev, "Failed to find nuvoton,sysgcr property, please update the device tree\n"); - dev_info(&pdev->dev, "Using nuvoton,npcm750-gcr for Poleg backward compatibility\n"); - gcr_regmap = syscon_regmap_lookup_by_compatible("nuvoton,npcm750-gcr"); - if (IS_ERR(gcr_regmap)) { - dev_err(&pdev->dev, "Failed to find nuvoton,npcm750-gcr"); - return PTR_ERR(gcr_regmap); - } - } /* checking which USB device is enabled */ - regmap_read(gcr_regmap, NPCM_MDLR_OFFSET, &mdlr); - if (!(mdlr & NPCM_MDLR_USBD0)) + regmap_read(rc->gcr_regmap, NPCM_MDLR_OFFSET, &mdlr); + if (!(mdlr & NPCM7XX_MDLR_USBD0)) ipsrst3_bits |= NPCM_IPSRST3_USBD0; - if (!(mdlr & NPCM_MDLR_USBD1)) + if (!(mdlr & NPCM7XX_MDLR_USBD1)) ipsrst1_bits |= NPCM_IPSRST1_USBD1; - if (!(mdlr & NPCM_MDLR_USBD2_4)) + if (!(mdlr & NPCM7XX_MDLR_USBD2_4)) ipsrst1_bits |= (NPCM_IPSRST1_USBD2 | NPCM_IPSRST1_USBD3 | NPCM_IPSRST1_USBD4); - if (!(mdlr & NPCM_MDLR_USBD0)) { + if (!(mdlr & NPCM7XX_MDLR_USBD0)) { ipsrst1_bits |= (NPCM_IPSRST1_USBD5 | NPCM_IPSRST1_USBD6); ipsrst3_bits |= (NPCM_IPSRST3_USBD7 | @@ -203,9 +226,9 @@ static int npcm_usb_reset(struct platform_device *pdev, struct npcm_rc_data *rc) writel(iprst3, rc->base + NPCM_IPSRST3); /* clear USB PHY RS bit */ - regmap_update_bits(gcr_regmap, NPCM_USB1PHYCTL_OFFSET, + regmap_update_bits(rc->gcr_regmap, NPCM_USB1PHYCTL_OFFSET, NPCM_USBXPHYCTL_RS, 0); - regmap_update_bits(gcr_regmap, NPCM_USB2PHYCTL_OFFSET, + regmap_update_bits(rc->gcr_regmap, NPCM_USB2PHYCTL_OFFSET, NPCM_USBXPHYCTL_RS, 0); /* deassert reset USB PHY */ @@ -215,9 +238,9 @@ static int npcm_usb_reset(struct platform_device *pdev, struct npcm_rc_data *rc) udelay(50); /* set USB PHY RS bit */ - regmap_update_bits(gcr_regmap, NPCM_USB1PHYCTL_OFFSET, + regmap_update_bits(rc->gcr_regmap, NPCM_USB1PHYCTL_OFFSET, NPCM_USBXPHYCTL_RS, NPCM_USBXPHYCTL_RS); - regmap_update_bits(gcr_regmap, NPCM_USB2PHYCTL_OFFSET, + regmap_update_bits(rc->gcr_regmap, NPCM_USB2PHYCTL_OFFSET, NPCM_USBXPHYCTL_RS, NPCM_USBXPHYCTL_RS); /* deassert reset USB devices*/ @@ -228,6 +251,118 @@ static int npcm_usb_reset(struct platform_device *pdev, struct npcm_rc_data *rc) writel(iprst1, rc->base + NPCM_IPSRST1); writel(iprst2, rc->base + NPCM_IPSRST2); writel(iprst3, rc->base + NPCM_IPSRST3); +} + +static void npcm_usb_reset_npcm8xx(struct npcm_rc_data *rc) +{ + u32 mdlr, iprst1, iprst2, iprst3, iprst4; + u32 ipsrst1_bits = 0; + u32 ipsrst2_bits = NPCM_IPSRST2_USB_HOST; + u32 ipsrst3_bits = 0; + u32 ipsrst4_bits = NPCM_IPSRST4_USB_HOST2 | NPCM_IPSRST4_USBPHY3; + + /* checking which USB device is enabled */ + regmap_read(rc->gcr_regmap, NPCM_MDLR_OFFSET, &mdlr); + if (!(mdlr & NPCM8XX_MDLR_USBD0_3)) { + ipsrst3_bits |= NPCM_IPSRST3_USBD0; + ipsrst1_bits |= (NPCM_IPSRST1_USBD1 | + NPCM_IPSRST1_USBD2 | + NPCM_IPSRST1_USBD3); + } + if (!(mdlr & NPCM8XX_MDLR_USBD4_7)) { + ipsrst1_bits |= (NPCM_IPSRST1_USBD4 | + NPCM_IPSRST1_USBD5 | + NPCM_IPSRST1_USBD6); + ipsrst3_bits |= NPCM_IPSRST3_USBD7; + } + + if (!(mdlr & NPCM8XX_MDLR_USBD8)) + ipsrst3_bits |= NPCM_IPSRST3_USBD8; + if (!(mdlr & NPCM8XX_MDLR_USBD9)) + ipsrst3_bits |= NPCM_IPSRST3_USBD9; + + /* assert reset USB PHY and USB devices */ + iprst1 = readl(rc->base + NPCM_IPSRST1); + iprst2 = readl(rc->base + NPCM_IPSRST2); + iprst3 = readl(rc->base + NPCM_IPSRST3); + iprst4 = readl(rc->base + NPCM_IPSRST4); + + iprst1 |= ipsrst1_bits; + iprst2 |= ipsrst2_bits; + iprst3 |= (ipsrst3_bits | NPCM_IPSRST3_USBPHY1 | + NPCM_IPSRST3_USBPHY2); + iprst2 |= ipsrst4_bits; + + writel(iprst1, rc->base + NPCM_IPSRST1); + writel(iprst2, rc->base + NPCM_IPSRST2); + writel(iprst3, rc->base + NPCM_IPSRST3); + writel(iprst4, rc->base + NPCM_IPSRST4); + + /* clear USB PHY RS bit */ + regmap_update_bits(rc->gcr_regmap, NPCM_USB1PHYCTL_OFFSET, + NPCM_USBXPHYCTL_RS, 0); + regmap_update_bits(rc->gcr_regmap, NPCM_USB2PHYCTL_OFFSET, + NPCM_USBXPHYCTL_RS, 0); + regmap_update_bits(rc->gcr_regmap, NPCM_USB3PHYCTL_OFFSET, + NPCM_USBXPHYCTL_RS, 0); + + /* deassert reset USB PHY */ + iprst3 &= ~(NPCM_IPSRST3_USBPHY1 | NPCM_IPSRST3_USBPHY2); + writel(iprst3, rc->base + NPCM_IPSRST3); + iprst4 &= ~NPCM_IPSRST4_USBPHY3; + writel(iprst4, rc->base + NPCM_IPSRST4); + + /* set USB PHY RS bit */ + regmap_update_bits(rc->gcr_regmap, NPCM_USB1PHYCTL_OFFSET, + NPCM_USBXPHYCTL_RS, NPCM_USBXPHYCTL_RS); + regmap_update_bits(rc->gcr_regmap, NPCM_USB2PHYCTL_OFFSET, + NPCM_USBXPHYCTL_RS, NPCM_USBXPHYCTL_RS); + regmap_update_bits(rc->gcr_regmap, NPCM_USB3PHYCTL_OFFSET, + NPCM_USBXPHYCTL_RS, NPCM_USBXPHYCTL_RS); + + /* deassert reset USB devices*/ + iprst1 &= ~ipsrst1_bits; + iprst2 &= ~ipsrst2_bits; + iprst3 &= ~ipsrst3_bits; + iprst4 &= ~ipsrst4_bits; + + writel(iprst1, rc->base + NPCM_IPSRST1); + writel(iprst2, rc->base + NPCM_IPSRST2); + writel(iprst3, rc->base + NPCM_IPSRST3); + writel(iprst4, rc->base + NPCM_IPSRST4); +} + +/* + * The following procedure should be observed in USB PHY, USB device and + * USB host initialization at BMC boot + */ +static int npcm_usb_reset(struct platform_device *pdev, struct npcm_rc_data *rc) +{ + struct device *dev = &pdev->dev; + + rc->gcr_regmap = syscon_regmap_lookup_by_phandle(dev->of_node, "nuvoton,sysgcr"); + if (IS_ERR(rc->gcr_regmap)) { + dev_warn(&pdev->dev, "Failed to find nuvoton,sysgcr property, please update the device tree\n"); + dev_info(&pdev->dev, "Using nuvoton,npcm750-gcr for Poleg backward compatibility\n"); + rc->gcr_regmap = syscon_regmap_lookup_by_compatible("nuvoton,npcm750-gcr"); + if (IS_ERR(rc->gcr_regmap)) { + dev_err(&pdev->dev, "Failed to find nuvoton,npcm750-gcr"); + return PTR_ERR(rc->gcr_regmap); + } + } + + rc->info = (const struct npcm_reset_info *) + of_match_device(dev->driver->of_match_table, dev)->data; + switch (rc->info->bmc_id) { + case BMC_NPCM7XX: + npcm_usb_reset_npcm7xx(rc); + break; + case BMC_NPCM8XX: + npcm_usb_reset_npcm8xx(rc); + break; + default: + return -ENODEV; + } return 0; } |