summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/libsas/sas_expander.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/libsas/sas_expander.c')
-rw-r--r--drivers/scsi/libsas/sas_expander.c110
1 files changed, 55 insertions, 55 deletions
diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
index 55cbd0180159..74cc4a02092e 100644
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -183,21 +183,21 @@ static char sas_route_char(struct domain_device *dev, struct ex_phy *phy)
}
}
-static enum sas_dev_type to_dev_type(struct discover_resp *dr)
+static enum sas_device_type to_dev_type(struct discover_resp *dr)
{
/* This is detecting a failure to transmit initial dev to host
* FIS as described in section J.5 of sas-2 r16
*/
- if (dr->attached_dev_type == NO_DEVICE && dr->attached_sata_dev &&
+ if (dr->attached_dev_type == SAS_PHY_UNUSED && dr->attached_sata_dev &&
dr->linkrate >= SAS_LINK_RATE_1_5_GBPS)
- return SATA_PENDING;
+ return SAS_SATA_PENDING;
else
return dr->attached_dev_type;
}
static void sas_set_ex_phy(struct domain_device *dev, int phy_id, void *rsp)
{
- enum sas_dev_type dev_type;
+ enum sas_device_type dev_type;
enum sas_linkrate linkrate;
u8 sas_addr[SAS_ADDR_SIZE];
struct smp_resp *resp = rsp;
@@ -238,7 +238,7 @@ static void sas_set_ex_phy(struct domain_device *dev, int phy_id, void *rsp)
/* Handle vacant phy - rest of dr data is not valid so skip it */
if (phy->phy_state == PHY_VACANT) {
memset(phy->attached_sas_addr, 0, SAS_ADDR_SIZE);
- phy->attached_dev_type = NO_DEVICE;
+ phy->attached_dev_type = SAS_PHY_UNUSED;
if (!test_bit(SAS_HA_ATA_EH_ACTIVE, &ha->state)) {
phy->phy_id = phy_id;
goto skip;
@@ -259,7 +259,7 @@ static void sas_set_ex_phy(struct domain_device *dev, int phy_id, void *rsp)
/* help some expanders that fail to zero sas_address in the 'no
* device' case
*/
- if (phy->attached_dev_type == NO_DEVICE ||
+ if (phy->attached_dev_type == SAS_PHY_UNUSED ||
phy->linkrate < SAS_LINK_RATE_1_5_GBPS)
memset(phy->attached_sas_addr, 0, SAS_ADDR_SIZE);
else
@@ -292,13 +292,13 @@ static void sas_set_ex_phy(struct domain_device *dev, int phy_id, void *rsp)
out:
switch (phy->attached_dev_type) {
- case SATA_PENDING:
+ case SAS_SATA_PENDING:
type = "stp pending";
break;
- case NO_DEVICE:
+ case SAS_PHY_UNUSED:
type = "no device";
break;
- case SAS_END_DEV:
+ case SAS_END_DEVICE:
if (phy->attached_iproto) {
if (phy->attached_tproto)
type = "host+target";
@@ -311,8 +311,8 @@ static void sas_set_ex_phy(struct domain_device *dev, int phy_id, void *rsp)
type = "ssp";
}
break;
- case EDGE_DEV:
- case FANOUT_DEV:
+ case SAS_EDGE_EXPANDER_DEVICE:
+ case SAS_FANOUT_EXPANDER_DEVICE:
type = "smp";
break;
default:
@@ -833,7 +833,7 @@ static struct domain_device *sas_ex_discover_end_dev(
} else
#endif
if (phy->attached_tproto & SAS_PROTOCOL_SSP) {
- child->dev_type = SAS_END_DEV;
+ child->dev_type = SAS_END_DEVICE;
rphy = sas_end_device_alloc(phy->port);
/* FIXME: error handling */
if (unlikely(!rphy))
@@ -932,11 +932,11 @@ static struct domain_device *sas_ex_discover_expander(
switch (phy->attached_dev_type) {
- case EDGE_DEV:
+ case SAS_EDGE_EXPANDER_DEVICE:
rphy = sas_expander_alloc(phy->port,
SAS_EDGE_EXPANDER_DEVICE);
break;
- case FANOUT_DEV:
+ case SAS_FANOUT_EXPANDER_DEVICE:
rphy = sas_expander_alloc(phy->port,
SAS_FANOUT_EXPANDER_DEVICE);
break;
@@ -1013,7 +1013,7 @@ static int sas_ex_discover_dev(struct domain_device *dev, int phy_id)
if (sas_dev_present_in_domain(dev->port, ex_phy->attached_sas_addr))
sas_ex_disable_port(dev, ex_phy->attached_sas_addr);
- if (ex_phy->attached_dev_type == NO_DEVICE) {
+ if (ex_phy->attached_dev_type == SAS_PHY_UNUSED) {
if (ex_phy->routing_attr == DIRECT_ROUTING) {
memset(ex_phy->attached_sas_addr, 0, SAS_ADDR_SIZE);
sas_configure_routing(dev, ex_phy->attached_sas_addr);
@@ -1022,10 +1022,10 @@ static int sas_ex_discover_dev(struct domain_device *dev, int phy_id)
} else if (ex_phy->linkrate == SAS_LINK_RATE_UNKNOWN)
return 0;
- if (ex_phy->attached_dev_type != SAS_END_DEV &&
- ex_phy->attached_dev_type != FANOUT_DEV &&
- ex_phy->attached_dev_type != EDGE_DEV &&
- ex_phy->attached_dev_type != SATA_PENDING) {
+ if (ex_phy->attached_dev_type != SAS_END_DEVICE &&
+ ex_phy->attached_dev_type != SAS_FANOUT_EXPANDER_DEVICE &&
+ ex_phy->attached_dev_type != SAS_EDGE_EXPANDER_DEVICE &&
+ ex_phy->attached_dev_type != SAS_SATA_PENDING) {
SAS_DPRINTK("unknown device type(0x%x) attached to ex %016llx "
"phy 0x%x\n", ex_phy->attached_dev_type,
SAS_ADDR(dev->sas_addr),
@@ -1049,11 +1049,11 @@ static int sas_ex_discover_dev(struct domain_device *dev, int phy_id)
}
switch (ex_phy->attached_dev_type) {
- case SAS_END_DEV:
- case SATA_PENDING:
+ case SAS_END_DEVICE:
+ case SAS_SATA_PENDING:
child = sas_ex_discover_end_dev(dev, phy_id);
break;
- case FANOUT_DEV:
+ case SAS_FANOUT_EXPANDER_DEVICE:
if (SAS_ADDR(dev->port->disc.fanout_sas_addr)) {
SAS_DPRINTK("second fanout expander %016llx phy 0x%x "
"attached to ex %016llx phy 0x%x\n",
@@ -1067,7 +1067,7 @@ static int sas_ex_discover_dev(struct domain_device *dev, int phy_id)
memcpy(dev->port->disc.fanout_sas_addr,
ex_phy->attached_sas_addr, SAS_ADDR_SIZE);
/* fallthrough */
- case EDGE_DEV:
+ case SAS_EDGE_EXPANDER_DEVICE:
child = sas_ex_discover_expander(dev, phy_id);
break;
default:
@@ -1111,8 +1111,8 @@ static int sas_find_sub_addr(struct domain_device *dev, u8 *sub_addr)
phy->phy_state == PHY_NOT_PRESENT)
continue;
- if ((phy->attached_dev_type == EDGE_DEV ||
- phy->attached_dev_type == FANOUT_DEV) &&
+ if ((phy->attached_dev_type == SAS_EDGE_EXPANDER_DEVICE ||
+ phy->attached_dev_type == SAS_FANOUT_EXPANDER_DEVICE) &&
phy->routing_attr == SUBTRACTIVE_ROUTING) {
memcpy(sub_addr, phy->attached_sas_addr,SAS_ADDR_SIZE);
@@ -1130,8 +1130,8 @@ static int sas_check_level_subtractive_boundary(struct domain_device *dev)
u8 sub_addr[8] = {0, };
list_for_each_entry(child, &ex->children, siblings) {
- if (child->dev_type != EDGE_DEV &&
- child->dev_type != FANOUT_DEV)
+ if (child->dev_type != SAS_EDGE_EXPANDER_DEVICE &&
+ child->dev_type != SAS_FANOUT_EXPANDER_DEVICE)
continue;
if (sub_addr[0] == 0) {
sas_find_sub_addr(child, sub_addr);
@@ -1208,7 +1208,7 @@ static int sas_check_ex_subtractive_boundary(struct domain_device *dev)
int i;
u8 *sub_sas_addr = NULL;
- if (dev->dev_type != EDGE_DEV)
+ if (dev->dev_type != SAS_EDGE_EXPANDER_DEVICE)
return 0;
for (i = 0; i < ex->num_phys; i++) {
@@ -1218,8 +1218,8 @@ static int sas_check_ex_subtractive_boundary(struct domain_device *dev)
phy->phy_state == PHY_NOT_PRESENT)
continue;
- if ((phy->attached_dev_type == FANOUT_DEV ||
- phy->attached_dev_type == EDGE_DEV) &&
+ if ((phy->attached_dev_type == SAS_FANOUT_EXPANDER_DEVICE ||
+ phy->attached_dev_type == SAS_EDGE_EXPANDER_DEVICE) &&
phy->routing_attr == SUBTRACTIVE_ROUTING) {
if (!sub_sas_addr)
@@ -1245,8 +1245,8 @@ static void sas_print_parent_topology_bug(struct domain_device *child,
struct ex_phy *child_phy)
{
static const char *ex_type[] = {
- [EDGE_DEV] = "edge",
- [FANOUT_DEV] = "fanout",
+ [SAS_EDGE_EXPANDER_DEVICE] = "edge",
+ [SAS_FANOUT_EXPANDER_DEVICE] = "fanout",
};
struct domain_device *parent = child->parent;
@@ -1321,8 +1321,8 @@ static int sas_check_parent_topology(struct domain_device *child)
if (!child->parent)
return 0;
- if (child->parent->dev_type != EDGE_DEV &&
- child->parent->dev_type != FANOUT_DEV)
+ if (child->parent->dev_type != SAS_EDGE_EXPANDER_DEVICE &&
+ child->parent->dev_type != SAS_FANOUT_EXPANDER_DEVICE)
return 0;
parent_ex = &child->parent->ex_dev;
@@ -1341,8 +1341,8 @@ static int sas_check_parent_topology(struct domain_device *child)
child_phy = &child_ex->ex_phy[parent_phy->attached_phy_id];
switch (child->parent->dev_type) {
- case EDGE_DEV:
- if (child->dev_type == FANOUT_DEV) {
+ case SAS_EDGE_EXPANDER_DEVICE:
+ if (child->dev_type == SAS_FANOUT_EXPANDER_DEVICE) {
if (parent_phy->routing_attr != SUBTRACTIVE_ROUTING ||
child_phy->routing_attr != TABLE_ROUTING) {
sas_print_parent_topology_bug(child, parent_phy, child_phy);
@@ -1366,7 +1366,7 @@ static int sas_check_parent_topology(struct domain_device *child)
}
}
break;
- case FANOUT_DEV:
+ case SAS_FANOUT_EXPANDER_DEVICE:
if (parent_phy->routing_attr != TABLE_ROUTING ||
child_phy->routing_attr != SUBTRACTIVE_ROUTING) {
sas_print_parent_topology_bug(child, parent_phy, child_phy);
@@ -1619,8 +1619,8 @@ static int sas_ex_level_discovery(struct asd_sas_port *port, const int level)
struct domain_device *dev;
list_for_each_entry(dev, &port->dev_list, dev_list_node) {
- if (dev->dev_type == EDGE_DEV ||
- dev->dev_type == FANOUT_DEV) {
+ if (dev->dev_type == SAS_EDGE_EXPANDER_DEVICE ||
+ dev->dev_type == SAS_FANOUT_EXPANDER_DEVICE) {
struct sas_expander_device *ex =
rphy_to_expander_device(dev->rphy);
@@ -1720,7 +1720,7 @@ static int sas_get_phy_change_count(struct domain_device *dev,
}
static int sas_get_phy_attached_dev(struct domain_device *dev, int phy_id,
- u8 *sas_addr, enum sas_dev_type *type)
+ u8 *sas_addr, enum sas_device_type *type)
{
int res;
struct smp_resp *disc_resp;
@@ -1849,7 +1849,7 @@ static int sas_find_bcast_dev(struct domain_device *dev,
SAS_DPRINTK("Expander phys DID NOT change\n");
}
list_for_each_entry(ch, &ex->children, siblings) {
- if (ch->dev_type == EDGE_DEV || ch->dev_type == FANOUT_DEV) {
+ if (ch->dev_type == SAS_EDGE_EXPANDER_DEVICE || ch->dev_type == SAS_FANOUT_EXPANDER_DEVICE) {
res = sas_find_bcast_dev(ch, src_dev);
if (*src_dev)
return res;
@@ -1866,8 +1866,8 @@ static void sas_unregister_ex_tree(struct asd_sas_port *port, struct domain_devi
list_for_each_entry_safe(child, n, &ex->children, siblings) {
set_bit(SAS_DEV_GONE, &child->state);
- if (child->dev_type == EDGE_DEV ||
- child->dev_type == FANOUT_DEV)
+ if (child->dev_type == SAS_EDGE_EXPANDER_DEVICE ||
+ child->dev_type == SAS_FANOUT_EXPANDER_DEVICE)
sas_unregister_ex_tree(port, child);
else
sas_unregister_dev(port, child);
@@ -1887,8 +1887,8 @@ static void sas_unregister_devs_sas_addr(struct domain_device *parent,
if (SAS_ADDR(child->sas_addr) ==
SAS_ADDR(phy->attached_sas_addr)) {
set_bit(SAS_DEV_GONE, &child->state);
- if (child->dev_type == EDGE_DEV ||
- child->dev_type == FANOUT_DEV)
+ if (child->dev_type == SAS_EDGE_EXPANDER_DEVICE ||
+ child->dev_type == SAS_FANOUT_EXPANDER_DEVICE)
sas_unregister_ex_tree(parent->port, child);
else
sas_unregister_dev(parent->port, child);
@@ -1916,8 +1916,8 @@ static int sas_discover_bfs_by_root_level(struct domain_device *root,
int res = 0;
list_for_each_entry(child, &ex_root->children, siblings) {
- if (child->dev_type == EDGE_DEV ||
- child->dev_type == FANOUT_DEV) {
+ if (child->dev_type == SAS_EDGE_EXPANDER_DEVICE ||
+ child->dev_type == SAS_FANOUT_EXPANDER_DEVICE) {
struct sas_expander_device *ex =
rphy_to_expander_device(child->rphy);
@@ -1970,8 +1970,8 @@ static int sas_discover_new(struct domain_device *dev, int phy_id)
list_for_each_entry(child, &dev->ex_dev.children, siblings) {
if (SAS_ADDR(child->sas_addr) ==
SAS_ADDR(ex_phy->attached_sas_addr)) {
- if (child->dev_type == EDGE_DEV ||
- child->dev_type == FANOUT_DEV)
+ if (child->dev_type == SAS_EDGE_EXPANDER_DEVICE ||
+ child->dev_type == SAS_FANOUT_EXPANDER_DEVICE)
res = sas_discover_bfs_by_root(child);
break;
}
@@ -1979,16 +1979,16 @@ static int sas_discover_new(struct domain_device *dev, int phy_id)
return res;
}
-static bool dev_type_flutter(enum sas_dev_type new, enum sas_dev_type old)
+static bool dev_type_flutter(enum sas_device_type new, enum sas_device_type old)
{
if (old == new)
return true;
/* treat device directed resets as flutter, if we went
- * SAS_END_DEV to SATA_PENDING the link needs recovery
+ * SAS_END_DEVICE to SAS_SATA_PENDING the link needs recovery
*/
- if ((old == SATA_PENDING && new == SAS_END_DEV) ||
- (old == SAS_END_DEV && new == SATA_PENDING))
+ if ((old == SAS_SATA_PENDING && new == SAS_END_DEVICE) ||
+ (old == SAS_END_DEVICE && new == SAS_SATA_PENDING))
return true;
return false;
@@ -1998,7 +1998,7 @@ static int sas_rediscover_dev(struct domain_device *dev, int phy_id, bool last)
{
struct expander_device *ex = &dev->ex_dev;
struct ex_phy *phy = &ex->ex_phy[phy_id];
- enum sas_dev_type type = NO_DEVICE;
+ enum sas_device_type type = SAS_PHY_UNUSED;
u8 sas_addr[8];
int res;
@@ -2032,7 +2032,7 @@ static int sas_rediscover_dev(struct domain_device *dev, int phy_id, bool last)
sas_ex_phy_discover(dev, phy_id);
- if (ata_dev && phy->attached_dev_type == SATA_PENDING)
+ if (ata_dev && phy->attached_dev_type == SAS_SATA_PENDING)
action = ", needs recovery";
SAS_DPRINTK("ex %016llx phy 0x%x broadcast flutter%s\n",
SAS_ADDR(dev->sas_addr), phy_id, action);