summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/pm8001/pm8001_hwi.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/pm8001/pm8001_hwi.c')
-rw-r--r--drivers/scsi/pm8001/pm8001_hwi.c65
1 files changed, 21 insertions, 44 deletions
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index b4426b5b50bc..6e1bdd8e680e 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -373,10 +373,7 @@ static int bar4_shift(struct pm8001_hba_info *pm8001_ha, u32 shiftValue)
static void __devinit
mpi_set_phys_g3_with_ssc(struct pm8001_hba_info *pm8001_ha, u32 SSCbit)
{
- u32 offset;
- u32 value;
- u32 i, j;
- u32 bit_cnt;
+ u32 value, offset, i;
#define SAS2_SETTINGS_LOCAL_PHY_0_3_SHIFT_ADDR 0x00030000
#define SAS2_SETTINGS_LOCAL_PHY_4_7_SHIFT_ADDR 0x00040000
@@ -392,55 +389,35 @@ mpi_set_phys_g3_with_ssc(struct pm8001_hba_info *pm8001_ha, u32 SSCbit)
*/
if (-1 == bar4_shift(pm8001_ha, SAS2_SETTINGS_LOCAL_PHY_0_3_SHIFT_ADDR))
return;
- /* set SSC bit of PHY 0 - 3 */
+
for (i = 0; i < 4; i++) {
offset = SAS2_SETTINGS_LOCAL_PHY_0_3_OFFSET + 0x4000 * i;
- value = pm8001_cr32(pm8001_ha, 2, offset);
- if (SSCbit) {
- value |= 0x00000001 << PHY_G3_WITH_SSC_BIT_SHIFT;
- value &= ~(0x00000001 << PHY_G3_WITHOUT_SSC_BIT_SHIFT);
- } else {
- value |= 0x00000001 << PHY_G3_WITHOUT_SSC_BIT_SHIFT;
- value &= ~(0x00000001 << PHY_G3_WITH_SSC_BIT_SHIFT);
- }
- bit_cnt = 0;
- for (j = 0; j < 31; j++)
- if ((value >> j) & 0x00000001)
- bit_cnt++;
- if (bit_cnt % 2)
- value &= ~(0x00000001 << SNW3_PHY_CAPABILITIES_PARITY);
- else
- value |= 0x00000001 << SNW3_PHY_CAPABILITIES_PARITY;
-
- pm8001_cw32(pm8001_ha, 2, offset, value);
+ pm8001_cw32(pm8001_ha, 2, offset, 0x80001501);
}
-
/* shift membase 3 for SAS2_SETTINGS_LOCAL_PHY 4 - 7 */
if (-1 == bar4_shift(pm8001_ha, SAS2_SETTINGS_LOCAL_PHY_4_7_SHIFT_ADDR))
return;
-
- /* set SSC bit of PHY 4 - 7 */
for (i = 4; i < 8; i++) {
offset = SAS2_SETTINGS_LOCAL_PHY_4_7_OFFSET + 0x4000 * (i-4);
- value = pm8001_cr32(pm8001_ha, 2, offset);
- if (SSCbit) {
- value |= 0x00000001 << PHY_G3_WITH_SSC_BIT_SHIFT;
- value &= ~(0x00000001 << PHY_G3_WITHOUT_SSC_BIT_SHIFT);
- } else {
- value |= 0x00000001 << PHY_G3_WITHOUT_SSC_BIT_SHIFT;
- value &= ~(0x00000001 << PHY_G3_WITH_SSC_BIT_SHIFT);
- }
- bit_cnt = 0;
- for (j = 0; j < 31; j++)
- if ((value >> j) & 0x00000001)
- bit_cnt++;
- if (bit_cnt % 2)
- value &= ~(0x00000001 << SNW3_PHY_CAPABILITIES_PARITY);
- else
- value |= 0x00000001 << SNW3_PHY_CAPABILITIES_PARITY;
-
- pm8001_cw32(pm8001_ha, 2, offset, value);
+ pm8001_cw32(pm8001_ha, 2, offset, 0x80001501);
}
+ /*************************************************************
+ Change the SSC upspreading value to 0x0 so that upspreading is disabled.
+ Device MABC SMOD0 Controls
+ Address: (via MEMBASE-III):
+ Using shifted destination address 0x0_0000: with Offset 0xD8
+
+ 31:28 R/W Reserved Do not change
+ 27:24 R/W SAS_SMOD_SPRDUP 0000
+ 23:20 R/W SAS_SMOD_SPRDDN 0000
+ 19:0 R/W Reserved Do not change
+ Upon power-up this register will read as 0x8990c016,
+ and I would like you to change the SAS_SMOD_SPRDUP bits to 0b0000
+ so that the written value will be 0x8090c016.
+ This will ensure only down-spreading SSC is enabled on the SPC.
+ *************************************************************/
+ value = pm8001_cr32(pm8001_ha, 2, 0xd8);
+ pm8001_cw32(pm8001_ha, 2, 0xd8, 0x8000C016);
/*set the shifted destination address to 0x0 to avoid error operation */
bar4_shift(pm8001_ha, 0x0);