summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/t128.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/t128.c')
-rw-r--r--drivers/scsi/t128.c83
1 files changed, 26 insertions, 57 deletions
diff --git a/drivers/scsi/t128.c b/drivers/scsi/t128.c
index 8cc80931df14..87828acbf7c6 100644
--- a/drivers/scsi/t128.c
+++ b/drivers/scsi/t128.c
@@ -1,4 +1,3 @@
-#define AUTOSENSE
#define PSEUDO_DMA
/*
@@ -12,8 +11,6 @@
* drew@colorado.edu
* +1 (303) 440-4894
*
- * DISTRIBUTION RELEASE 3.
- *
* For more information, please consult
*
* Trantor Systems, Ltd.
@@ -24,40 +21,9 @@
* 5415 Randall Place
* Fremont, CA 94538
* 1+ (415) 770-1400, FAX 1+ (415) 770-9910
- *
- * and
- *
- * NCR 5380 Family
- * SCSI Protocol Controller
- * Databook
- *
- * NCR Microelectronics
- * 1635 Aeroplaza Drive
- * Colorado Springs, CO 80916
- * 1+ (719) 578-3400
- * 1+ (800) 334-5454
*/
/*
- * Options :
- * AUTOSENSE - if defined, REQUEST SENSE will be performed automatically
- * for commands that return with a CHECK CONDITION status.
- *
- * PSEUDO_DMA - enables PSEUDO-DMA hardware, should give a 3-4X performance
- * increase compared to polled I/O.
- *
- * PARITY - enable parity checking. Not supported.
- *
- * SCSI2 - enable support for SCSI-II tagged queueing. Untested.
- *
- *
- * UNSAFE - leave interrupts enabled during pseudo-DMA transfers. You
- * only really want to use this if you're having a problem with
- * dropped characters during high speed communications, and even
- * then, you're going to be better off twiddling with transfersize.
- *
- * USLEEP - enable support for devices that don't disconnect. Untested.
- *
* The card is detected and initialized in one of several ways :
* 1. Autoprobe (default) - since the board is memory mapped,
* a BIOS signature is scanned for to locate the registers.
@@ -111,7 +77,6 @@
#include <linux/module.h>
#include <linux/delay.h>
-#include "scsi.h"
#include <scsi/scsi_host.h>
#include "t128.h"
#define AUTOPROBE_IRQ
@@ -148,6 +113,7 @@ static struct signature {
#define NO_SIGNATURES ARRAY_SIZE(signatures)
+#ifndef MODULE
/*
* Function : t128_setup(char *str, int *ints)
*
@@ -158,9 +124,13 @@ static struct signature {
*
*/
-void __init t128_setup(char *str, int *ints){
+static int __init t128_setup(char *str)
+{
static int commandline_current = 0;
int i;
+ int ints[10];
+
+ get_options(str, ARRAY_SIZE(ints), ints);
if (ints[0] != 2)
printk("t128_setup : usage t128=address,irq\n");
else
@@ -174,8 +144,12 @@ void __init t128_setup(char *str, int *ints){
}
++commandline_current;
}
+ return 1;
}
+__setup("t128=", t128_setup);
+#endif
+
/*
* Function : int t128_detect(struct scsi_host_template * tpnt)
*
@@ -189,17 +163,14 @@ void __init t128_setup(char *str, int *ints){
*
*/
-int __init t128_detect(struct scsi_host_template * tpnt){
+static int __init t128_detect(struct scsi_host_template *tpnt)
+{
static int current_override = 0, current_base = 0;
struct Scsi_Host *instance;
unsigned long base;
void __iomem *p;
int sig, count;
- tpnt->proc_name = "t128";
- tpnt->show_info = t128_show_info;
- tpnt->write_info = t128_write_info;
-
for (count = 0; current_override < NO_OVERRIDES; ++current_override) {
base = 0;
p = NULL;
@@ -254,15 +225,19 @@ found:
else
instance->irq = NCR5380_probe_irq(instance, T128_IRQS);
- if (instance->irq != SCSI_IRQ_NONE)
+ /* Compatibility with documented NCR5380 kernel parameters */
+ if (instance->irq == 255)
+ instance->irq = NO_IRQ;
+
+ if (instance->irq != NO_IRQ)
if (request_irq(instance->irq, t128_intr, 0, "t128",
instance)) {
printk("scsi%d : IRQ%d not free, interrupts disabled\n",
instance->host_no, instance->irq);
- instance->irq = SCSI_IRQ_NONE;
+ instance->irq = NO_IRQ;
}
- if (instance->irq == SCSI_IRQ_NONE) {
+ if (instance->irq == NO_IRQ) {
printk("scsi%d : interrupts not enabled. for better interactive performance,\n", instance->host_no);
printk("scsi%d : please jumper the board for a free IRQ.\n", instance->host_no);
}
@@ -271,16 +246,6 @@ found:
printk("scsi%d : irq = %d\n", instance->host_no, instance->irq);
#endif
- printk("scsi%d : at 0x%08lx", instance->host_no, instance->base);
- if (instance->irq == SCSI_IRQ_NONE)
- printk (" interrupts disabled");
- else
- printk (" irq %d", instance->irq);
- printk(" options CAN_QUEUE=%d CMD_PER_LUN=%d release=%d",
- CAN_QUEUE, CMD_PER_LUN, T128_PUBLIC_RELEASE);
- NCR5380_print_options(instance);
- printk("\n");
-
++current_override;
++count;
}
@@ -291,7 +256,7 @@ static int t128_release(struct Scsi_Host *shost)
{
NCR5380_local_declare();
NCR5380_setup(shost);
- if (shost->irq)
+ if (shost->irq != NO_IRQ)
free_irq(shost->irq, shost);
NCR5380_exit(shost);
if (shost->io_port && shost->n_io_port)
@@ -321,8 +286,8 @@ static int t128_release(struct Scsi_Host *shost)
* and matching the H_C_S coordinates to what DOS uses.
*/
-int t128_biosparam(struct scsi_device *sdev, struct block_device *bdev,
- sector_t capacity, int * ip)
+static int t128_biosparam(struct scsi_device *sdev, struct block_device *bdev,
+ sector_t capacity, int *ip)
{
ip[0] = 64;
ip[1] = 32;
@@ -430,6 +395,10 @@ static struct scsi_host_template driver_template = {
.name = "Trantor T128/T128F/T228",
.detect = t128_detect,
.release = t128_release,
+ .proc_name = "t128",
+ .show_info = t128_show_info,
+ .write_info = t128_write_info,
+ .info = t128_info,
.queuecommand = t128_queue_command,
.eh_abort_handler = t128_abort,
.eh_bus_reset_handler = t128_bus_reset,