diff options
Diffstat (limited to 'drivers/spi')
| -rw-r--r-- | drivers/spi/Kconfig | 20 | ||||
| -rw-r--r-- | drivers/spi/Makefile | 3 | ||||
| -rw-r--r-- | drivers/spi/spi-sun4i.c | 478 | ||||
| -rw-r--r-- | drivers/spi/spi-sun6i.c | 484 | ||||
| -rw-r--r-- | drivers/spi/spi-tegra114.c | 4 | ||||
| -rw-r--r-- | drivers/spi/spi-ti-qspi.c | 1 | ||||
| -rw-r--r-- | drivers/spi/spi-ti-ssp.c | 378 | ||||
| -rw-r--r-- | drivers/spi/spi-topcliff-pch.c | 47 | ||||
| -rw-r--r-- | drivers/spi/spi-txx9.c | 25 | ||||
| -rw-r--r-- | drivers/spi/spi-xcomm.c | 12 | ||||
| -rw-r--r-- | drivers/spi/spi.c | 12 |
11 files changed, 1005 insertions, 459 deletions
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 2a1b0a7d9415..756b5b3ca200 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -458,6 +458,19 @@ config SPI_SIRF help SPI driver for CSR SiRFprimaII SoCs +config SPI_SUN4I + tristate "Allwinner A10 SoCs SPI controller" + depends on ARCH_SUNXI || COMPILE_TEST + help + SPI driver for Allwinner sun4i, sun5i and sun7i SoCs + +config SPI_SUN6I + tristate "Allwinner A31 SPI controller" + depends on ARCH_SUNXI || COMPILE_TEST + depends on RESET_CONTROLLER + help + This enables using the SPI controller on the Allwinner A31 SoCs. + config SPI_MXS tristate "Freescale MXS SPI controller" depends on ARCH_MXS @@ -490,13 +503,6 @@ config SPI_TEGRA20_SLINK help SPI driver for Nvidia Tegra20/Tegra30 SLINK Controller interface. -config SPI_TI_SSP - tristate "TI Sequencer Serial Port - SPI Support" - depends on MFD_TI_SSP - help - This selects an SPI master implementation using a TI sequencer - serial port. - config SPI_TOPCLIFF_PCH tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) SPI" depends on PCI diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index e598147b06ef..e245b94d07d8 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -71,10 +71,11 @@ obj-$(CONFIG_SPI_SH_HSPI) += spi-sh-hspi.o obj-$(CONFIG_SPI_SH_MSIOF) += spi-sh-msiof.o obj-$(CONFIG_SPI_SH_SCI) += spi-sh-sci.o obj-$(CONFIG_SPI_SIRF) += spi-sirf.o +obj-$(CONFIG_SPI_SUN4I) += spi-sun4i.o +obj-$(CONFIG_SPI_SUN6I) += spi-sun6i.o obj-$(CONFIG_SPI_TEGRA114) += spi-tegra114.o obj-$(CONFIG_SPI_TEGRA20_SFLASH) += spi-tegra20-sflash.o obj-$(CONFIG_SPI_TEGRA20_SLINK) += spi-tegra20-slink.o -obj-$(CONFIG_SPI_TI_SSP) += spi-ti-ssp.o obj-$(CONFIG_SPI_TLE62X0) += spi-tle62x0.o obj-$(CONFIG_SPI_TOPCLIFF_PCH) += spi-topcliff-pch.o obj-$(CONFIG_SPI_TXX9) += spi-txx9.o diff --git a/drivers/spi/spi-sun4i.c b/drivers/spi/spi-sun4i.c new file mode 100644 index 000000000000..d266a8702067 --- /dev/null +++ b/drivers/spi/spi-sun4i.c @@ -0,0 +1,478 @@ +/* + * Copyright (C) 2012 - 2014 Allwinner Tech + * Pan Nan <pannan@allwinnertech.com> + * + * Copyright (C) 2014 Maxime Ripard + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/workqueue.h> + +#include <linux/spi/spi.h> + +#define SUN4I_FIFO_DEPTH 64 + +#define SUN4I_RXDATA_REG 0x00 + +#define SUN4I_TXDATA_REG 0x04 + +#define SUN4I_CTL_REG 0x08 +#define SUN4I_CTL_ENABLE BIT(0) +#define SUN4I_CTL_MASTER BIT(1) +#define SUN4I_CTL_CPHA BIT(2) +#define SUN4I_CTL_CPOL BIT(3) +#define SUN4I_CTL_CS_ACTIVE_LOW BIT(4) +#define SUN4I_CTL_LMTF BIT(6) +#define SUN4I_CTL_TF_RST BIT(8) +#define SUN4I_CTL_RF_RST BIT(9) +#define SUN4I_CTL_XCH BIT(10) +#define SUN4I_CTL_CS_MASK 0x3000 +#define SUN4I_CTL_CS(cs) (((cs) << 12) & SUN4I_CTL_CS_MASK) +#define SUN4I_CTL_DHB BIT(15) +#define SUN4I_CTL_CS_MANUAL BIT(16) +#define SUN4I_CTL_CS_LEVEL BIT(17) +#define SUN4I_CTL_TP BIT(18) + +#define SUN4I_INT_CTL_REG 0x0c +#define SUN4I_INT_CTL_TC BIT(16) + +#define SUN4I_INT_STA_REG 0x10 + +#define SUN4I_DMA_CTL_REG 0x14 + +#define SUN4I_WAIT_REG 0x18 + +#define SUN4I_CLK_CTL_REG 0x1c +#define SUN4I_CLK_CTL_CDR2_MASK 0xff +#define SUN4I_CLK_CTL_CDR2(div) ((div) & SUN4I_CLK_CTL_CDR2_MASK) +#define SUN4I_CLK_CTL_CDR1_MASK 0xf +#define SUN4I_CLK_CTL_CDR1(div) (((div) & SUN4I_CLK_CTL_CDR1_MASK) << 8) +#define SUN4I_CLK_CTL_DRS BIT(12) + +#define SUN4I_BURST_CNT_REG 0x20 +#define SUN4I_BURST_CNT(cnt) ((cnt) & 0xffffff) + +#define SUN4I_XMIT_CNT_REG 0x24 +#define SUN4I_XMIT_CNT(cnt) ((cnt) & 0xffffff) + +#define SUN4I_FIFO_STA_REG 0x28 +#define SUN4I_FIFO_STA_RF_CNT_MASK 0x7f +#define SUN4I_FIFO_STA_RF_CNT_BITS 0 +#define SUN4I_FIFO_STA_TF_CNT_MASK 0x7f +#define SUN4I_FIFO_STA_TF_CNT_BITS 16 + +struct sun4i_spi { + struct spi_master *master; + void __iomem *base_addr; + struct clk *hclk; + struct clk *mclk; + + struct completion done; + + const u8 *tx_buf; + u8 *rx_buf; + int len; +}; + +static inline u32 sun4i_spi_read(struct sun4i_spi *sspi, u32 reg) +{ + return readl(sspi->base_addr + reg); +} + +static inline void sun4i_spi_write(struct sun4i_spi *sspi, u32 reg, u32 value) +{ + writel(value, sspi->base_addr + reg); +} + +static inline void sun4i_spi_drain_fifo(struct sun4i_spi *sspi, int len) +{ + u32 reg, cnt; + u8 byte; + + /* See how much data is available */ + reg = sun4i_spi_read(sspi, SUN4I_FIFO_STA_REG); + reg &= SUN4I_FIFO_STA_RF_CNT_MASK; + cnt = reg >> SUN4I_FIFO_STA_RF_CNT_BITS; + + if (len > cnt) + len = cnt; + + while (len--) { + byte = readb(sspi->base_addr + SUN4I_RXDATA_REG); + if (sspi->rx_buf) + *sspi->rx_buf++ = byte; + } +} + +static inline void sun4i_spi_fill_fifo(struct sun4i_spi *sspi, int len) +{ + u8 byte; + + if (len > sspi->len) + len = sspi->len; + + while (len--) { + byte = sspi->tx_buf ? *sspi->tx_buf++ : 0; + writeb(byte, sspi->base_addr + SUN4I_TXDATA_REG); + sspi->len--; + } +} + +static void sun4i_spi_set_cs(struct spi_device *spi, bool enable) +{ + struct sun4i_spi *sspi = spi_master_get_devdata(spi->master); + u32 reg; + + reg = sun4i_spi_read(sspi, SUN4I_CTL_REG); + + reg &= ~SUN4I_CTL_CS_MASK; + reg |= SUN4I_CTL_CS(spi->chip_select); + + if (enable) + reg |= SUN4I_CTL_CS_LEVEL; + else + reg &= ~SUN4I_CTL_CS_LEVEL; + + /* + * Even though this looks irrelevant since we are supposed to + * be controlling the chip select manually, this bit also + * controls the levels of the chip select for inactive + * devices. + * + * If we don't set it, the chip select level will go low by + * default when the device is idle, which is not really + * expected in the common case where the chip select is active + * low. + */ + if (spi->mode & SPI_CS_HIGH) + reg &= ~SUN4I_CTL_CS_ACTIVE_LOW; + else + reg |= SUN4I_CTL_CS_ACTIVE_LOW; + + sun4i_spi_write(sspi, SUN4I_CTL_REG, reg); +} + +static int sun4i_spi_transfer_one(struct spi_master *master, + struct spi_device *spi, + struct spi_transfer *tfr) +{ + struct sun4i_spi *sspi = spi_master_get_devdata(master); + unsigned int mclk_rate, div, timeout; + unsigned int tx_len = 0; + int ret = 0; + u32 reg; + + /* We don't support transfer larger than the FIFO */ + if (tfr->len > SUN4I_FIFO_DEPTH) + return -EINVAL; + + reinit_completion(&sspi->done); + sspi->tx_buf = tfr->tx_buf; + sspi->rx_buf = tfr->rx_buf; + sspi->len = tfr->len; + + /* Clear pending interrupts */ + sun4i_spi_write(sspi, SUN4I_INT_STA_REG, ~0); + + + reg = sun4i_spi_read(sspi, SUN4I_CTL_REG); + + /* Reset FIFOs */ + sun4i_spi_write(sspi, SUN4I_CTL_REG, + reg | SUN4I_CTL_RF_RST | SUN4I_CTL_TF_RST); + + /* + * Setup the transfer control register: Chip Select, + * polarities, etc. + */ + if (spi->mode & SPI_CPOL) + reg |= SUN4I_CTL_CPOL; + else + reg &= ~SUN4I_CTL_CPOL; + + if (spi->mode & SPI_CPHA) + reg |= SUN4I_CTL_CPHA; + else + reg &= ~SUN4I_CTL_CPHA; + + if (spi->mode & SPI_LSB_FIRST) + reg |= SUN4I_CTL_LMTF; + else + reg &= ~SUN4I_CTL_LMTF; + + + /* + * If it's a TX only transfer, we don't want to fill the RX + * FIFO with bogus data + */ + if (sspi->rx_buf) + reg &= ~SUN4I_CTL_DHB; + else + reg |= SUN4I_CTL_DHB; + + /* We want to control the chip select manually */ + reg |= SUN4I_CTL_CS_MANUAL; + + sun4i_spi_write(sspi, SUN4I_CTL_REG, reg); + + /* Ensure that we have a parent clock fast enough */ + mclk_rate = clk_get_rate(sspi->mclk); + if (mclk_rate < (2 * spi->max_speed_hz)) { + clk_set_rate(sspi->mclk, 2 * spi->max_speed_hz); + mclk_rate = clk_get_rate(sspi->mclk); + } + + /* + * Setup clock divider. + * + * We have two choices there. Either we can use the clock + * divide rate 1, which is calculated thanks to this formula: + * SPI_CLK = MOD_CLK / (2 ^ (cdr + 1)) + * Or we can use CDR2, which is calculated with the formula: + * SPI_CLK = MOD_CLK / (2 * (cdr + 1)) + * Wether we use the former or the latter is set through the + * DRS bit. + * + * First try CDR2, and if we can't reach the expected + * frequency, fall back to CDR1. + */ + div = mclk_rate / (2 * spi->max_speed_hz); + if (div <= (SUN4I_CLK_CTL_CDR2_MASK + 1)) { + if (div > 0) + div--; + + reg = SUN4I_CLK_CTL_CDR2(div) | SUN4I_CLK_CTL_DRS; + } else { + div = ilog2(mclk_rate) - ilog2(spi->max_speed_hz); + reg = SUN4I_CLK_CTL_CDR1(div); + } + + sun4i_spi_write(sspi, SUN4I_CLK_CTL_REG, reg); + + /* Setup the transfer now... */ + if (sspi->tx_buf) + tx_len = tfr->len; + + /* Setup the counters */ + sun4i_spi_write(sspi, SUN4I_BURST_CNT_REG, SUN4I_BURST_CNT(tfr->len)); + sun4i_spi_write(sspi, SUN4I_XMIT_CNT_REG, SUN4I_XMIT_CNT(tx_len)); + + /* Fill the TX FIFO */ + sun4i_spi_fill_fifo(sspi, SUN4I_FIFO_DEPTH); + + /* Enable the interrupts */ + sun4i_spi_write(sspi, SUN4I_INT_CTL_REG, SUN4I_INT_CTL_TC); + + /* Start the transfer */ + reg = sun4i_spi_read(sspi, SUN4I_CTL_REG); + sun4i_spi_write(sspi, SUN4I_CTL_REG, reg | SUN4I_CTL_XCH); + + timeout = wait_for_completion_timeout(&sspi->done, + msecs_to_jiffies(1000)); + if (!timeout) { + ret = -ETIMEDOUT; + goto out; + } + + sun4i_spi_drain_fifo(sspi, SUN4I_FIFO_DEPTH); + +out: + sun4i_spi_write(sspi, SUN4I_INT_CTL_REG, 0); + + return ret; +} + +static irqreturn_t sun4i_spi_handler(int irq, void *dev_id) +{ + struct sun4i_spi *sspi = dev_id; + u32 status = sun4i_spi_read(sspi, SUN4I_INT_STA_REG); + + /* Transfer complete */ + if (status & SUN4I_INT_CTL_TC) { + sun4i_spi_write(sspi, SUN4I_INT_STA_REG, SUN4I_INT_CTL_TC); + complete(&sspi->done); + return IRQ_HANDLED; + } + + return IRQ_NONE; +} + +static int sun4i_spi_runtime_resume(struct device *dev) +{ + struct spi_master *master = dev_get_drvdata(dev); + struct sun4i_spi *sspi = spi_master_get_devdata(master); + int ret; + + ret = clk_prepare_enable(sspi->hclk); + if (ret) { + dev_err(dev, "Couldn't enable AHB clock\n"); + goto out; + } + + ret = clk_prepare_enable(sspi->mclk); + if (ret) { + dev_err(dev, "Couldn't enable module clock\n"); + goto err; + } + + sun4i_spi_write(sspi, SUN4I_CTL_REG, + SUN4I_CTL_ENABLE | SUN4I_CTL_MASTER | SUN4I_CTL_TP); + + return 0; + +err: + clk_disable_unprepare(sspi->hclk); +out: + return ret; +} + +static int sun4i_spi_runtime_suspend(struct device *dev) +{ + struct spi_master *master = dev_get_drvdata(dev); + struct sun4i_spi *sspi = spi_master_get_devdata(master); + + clk_disable_unprepare(sspi->mclk); + clk_disable_unprepare(sspi->hclk); + + return 0; +} + +static int sun4i_spi_probe(struct platform_device *pdev) +{ + struct spi_master *master; + struct sun4i_spi *sspi; + struct resource *res; + int ret = 0, irq; + + master = spi_alloc_master(&pdev->dev, sizeof(struct sun4i_spi)); + if (!master) { + dev_err(&pdev->dev, "Unable to allocate SPI Master\n"); + return -ENOMEM; + } + + platform_set_drvdata(pdev, master); + sspi = spi_master_get_devdata(master); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + sspi->base_addr = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(sspi->base_addr)) { + ret = PTR_ERR(sspi->base_addr); + goto err_free_master; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "No spi IRQ specified\n"); + ret = -ENXIO; + goto err_free_master; + } + + ret = devm_request_irq(&pdev->dev, irq, sun4i_spi_handler, + 0, "sun4i-spi", sspi); + if (ret) { + dev_err(&pdev->dev, "Cannot request IRQ\n"); + goto err_free_master; + } + + sspi->master = master; + master->set_cs = sun4i_spi_set_cs; + master->transfer_one = sun4i_spi_transfer_one; + master->num_chipselect = 4; + master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LSB_FIRST; + master->bits_per_word_mask = SPI_BPW_MASK(8); + master->dev.of_node = pdev->dev.of_node; + master->auto_runtime_pm = true; + + sspi->hclk = devm_clk_get(&pdev->dev, "ahb"); + if (IS_ERR(sspi->hclk)) { + dev_err(&pdev->dev, "Unable to acquire AHB clock\n"); + ret = PTR_ERR(sspi->hclk); + goto err_free_master; + } + + sspi->mclk = devm_clk_get(&pdev->dev, "mod"); + if (IS_ERR(sspi->mclk)) { + dev_err(&pdev->dev, "Unable to acquire module clock\n"); + ret = PTR_ERR(sspi->mclk); + goto err_free_master; + } + + init_completion(&sspi->done); + + /* + * This wake-up/shutdown pattern is to be able to have the + * device woken up, even if runtime_pm is disabled + */ + ret = sun4i_spi_runtime_resume(&pdev->dev); + if (ret) { + dev_err(&pdev->dev, "Couldn't resume the device\n"); + goto err_free_master; + } + + pm_runtime_set_active(&pdev->dev); + pm_runtime_enable(&pdev->dev); + pm_runtime_idle(&pdev->dev); + + ret = devm_spi_register_master(&pdev->dev, master); + if (ret) { + dev_err(&pdev->dev, "cannot register SPI master\n"); + goto err_pm_disable; + } + + return 0; + +err_pm_disable: + pm_runtime_disable(&pdev->dev); + sun4i_spi_runtime_suspend(&pdev->dev); +err_free_master: + spi_master_put(master); + return ret; +} + +static int sun4i_spi_remove(struct platform_device *pdev) +{ + pm_runtime_disable(&pdev->dev); + + return 0; +} + +static const struct of_device_id sun4i_spi_match[] = { + { .compatible = "allwinner,sun4i-a10-spi", }, + {} +}; +MODULE_DEVICE_TABLE(of, sun4i_spi_match); + +static const struct dev_pm_ops sun4i_spi_pm_ops = { + .runtime_resume = sun4i_spi_runtime_resume, + .runtime_suspend = sun4i_spi_runtime_suspend, +}; + +static struct platform_driver sun4i_spi_driver = { + .probe = sun4i_spi_probe, + .remove = sun4i_spi_remove, + .driver = { + .name = "sun4i-spi", + .owner = THIS_MODULE, + .of_match_table = sun4i_spi_match, + .pm = &sun4i_spi_pm_ops, + }, +}; +module_platform_driver(sun4i_spi_driver); + +MODULE_AUTHOR("Pan Nan <pannan@allwinnertech.com>"); +MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>"); +MODULE_DESCRIPTION("Allwinner A1X/A20 SPI controller driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/spi/spi-sun6i.c b/drivers/spi/spi-sun6i.c new file mode 100644 index 000000000000..b3e3498a7e6f --- /dev/null +++ b/drivers/spi/spi-sun6i.c @@ -0,0 +1,484 @@ +/* + * Copyright (C) 2012 - 2014 Allwinner Tech + * Pan Nan <pannan@allwinnertech.com> + * + * Copyright (C) 2014 Maxime Ripard + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/reset.h> +#include <linux/workqueue.h> + +#include <linux/spi/spi.h> + +#define SUN6I_FIFO_DEPTH 128 + +#define SUN6I_GBL_CTL_REG 0x04 +#define SUN6I_GBL_CTL_BUS_ENABLE BIT(0) +#define SUN6I_GBL_CTL_MASTER BIT(1) +#define SUN6I_GBL_CTL_TP BIT(7) +#define SUN6I_GBL_CTL_RST BIT(31) + +#define SUN6I_TFR_CTL_REG 0x08 +#define SUN6I_TFR_CTL_CPHA BIT(0) +#define SUN6I_TFR_CTL_CPOL BIT(1) +#define SUN6I_TFR_CTL_SPOL BIT(2) +#define SUN6I_TFR_CTL_CS_MASK 0x30 +#define SUN6I_TFR_CTL_CS(cs) (((cs) << 4) & SUN6I_TFR_CTL_CS_MASK) +#define SUN6I_TFR_CTL_CS_MANUAL BIT(6) +#define SUN6I_TFR_CTL_CS_LEVEL BIT(7) +#define SUN6I_TFR_CTL_DHB BIT(8) +#define SUN6I_TFR_CTL_FBS BIT(12) +#define SUN6I_TFR_CTL_XCH BIT(31) + +#define SUN6I_INT_CTL_REG 0x10 +#define SUN6I_INT_CTL_RF_OVF BIT(8) +#define SUN6I_INT_CTL_TC BIT(12) + +#define SUN6I_INT_STA_REG 0x14 + +#define SUN6I_FIFO_CTL_REG 0x18 +#define SUN6I_FIFO_CTL_RF_RST BIT(15) +#define SUN6I_FIFO_CTL_TF_RST BIT(31) + +#define SUN6I_FIFO_STA_REG 0x1c +#define SUN6I_FIFO_STA_RF_CNT_MASK 0x7f +#define SUN6I_FIFO_STA_RF_CNT_BITS 0 +#define SUN6I_FIFO_STA_TF_CNT_MASK 0x7f +#define SUN6I_FIFO_STA_TF_CNT_BITS 16 + +#define SUN6I_CLK_CTL_REG 0x24 +#define SUN6I_CLK_CTL_CDR2_MASK 0xff +#define SUN6I_CLK_CTL_CDR2(div) (((div) & SUN6I_CLK_CTL_CDR2_MASK) << 0) +#define SUN6I_CLK_CTL_CDR1_MASK 0xf +#define SUN6I_CLK_CTL_CDR1(div) (((div) & SUN6I_CLK_CTL_CDR1_MASK) << 8) +#define SUN6I_CLK_CTL_DRS BIT(12) + +#define SUN6I_BURST_CNT_REG 0x30 +#define SUN6I_BURST_CNT(cnt) ((cnt) & 0xffffff) + +#define SUN6I_XMIT_CNT_REG 0x34 +#define SUN6I_XMIT_CNT(cnt) ((cnt) & 0xffffff) + +#define SUN6I_BURST_CTL_CNT_REG 0x38 +#define SUN6I_BURST_CTL_CNT_STC(cnt) ((cnt) & 0xffffff) + +#define SUN6I_TXDATA_REG 0x200 +#define SUN6I_RXDATA_REG 0x300 + +struct sun6i_spi { + struct spi_master *master; + void __iomem *base_addr; + struct clk *hclk; + struct clk *mclk; + struct reset_control *rstc; + + struct completion done; + + const u8 *tx_buf; + u8 *rx_buf; + int len; +}; + +static inline u32 sun6i_spi_read(struct sun6i_spi *sspi, u32 reg) +{ + return readl(sspi->base_addr + reg); +} + +static inline void sun6i_spi_write(struct sun6i_spi *sspi, u32 reg, u32 value) +{ + writel(value, sspi->base_addr + reg); +} + +static inline void sun6i_spi_drain_fifo(struct sun6i_spi *sspi, int len) +{ + u32 reg, cnt; + u8 byte; + + /* See how much data is available */ + reg = sun6i_spi_read(sspi, SUN6I_FIFO_STA_REG); + reg &= SUN6I_FIFO_STA_RF_CNT_MASK; + cnt = reg >> SUN6I_FIFO_STA_RF_CNT_BITS; + + if (len > cnt) + len = cnt; + + while (len--) { + byte = readb(sspi->base_addr + SUN6I_RXDATA_REG); + if (sspi->rx_buf) + *sspi->rx_buf++ = byte; + } +} + +static inline void sun6i_spi_fill_fifo(struct sun6i_spi *sspi, int len) +{ + u8 byte; + + if (len > sspi->len) + len = sspi->len; + + while (len--) { + byte = sspi->tx_buf ? *sspi->tx_buf++ : 0; + writeb(byte, sspi->base_addr + SUN6I_TXDATA_REG); + sspi->len--; + } +} + +static void sun6i_spi_set_cs(struct spi_device *spi, bool enable) +{ + struct sun6i_spi *sspi = spi_master_get_devdata(spi->master); + u32 reg; + + reg = sun6i_spi_read(sspi, SUN6I_TFR_CTL_REG); + reg &= ~SUN6I_TFR_CTL_CS_MASK; + reg |= SUN6I_TFR_CTL_CS(spi->chip_select); + + if (enable) + reg |= SUN6I_TFR_CTL_CS_LEVEL; + else + reg &= ~SUN6I_TFR_CTL_CS_LEVEL; + + sun6i_spi_write(sspi, SUN6I_TFR_CTL_REG, reg); +} + + +static int sun6i_spi_transfer_one(struct spi_master *master, + struct spi_device *spi, + struct spi_transfer *tfr) +{ + struct sun6i_spi *sspi = spi_master_get_devdata(master); + unsigned int mclk_rate, div, timeout; + unsigned int tx_len = 0; + int ret = 0; + u32 reg; + + /* We don't support transfer larger than the FIFO */ + if (tfr->len > SUN6I_FIFO_DEPTH) + return -EINVAL; + + reinit_completion(&sspi->done); + sspi->tx_buf = tfr->tx_buf; + sspi->rx_buf = tfr->rx_buf; + sspi->len = tfr->len; + + /* Clear pending interrupts */ + sun6i_spi_write(sspi, SUN6I_INT_STA_REG, ~0); + + /* Reset FIFO */ + sun6i_spi_write(sspi, SUN6I_FIFO_CTL_REG, + SUN6I_FIFO_CTL_RF_RST | SUN6I_FIFO_CTL_TF_RST); + + /* + * Setup the transfer control register: Chip Select, + * polarities, etc. + */ + reg = sun6i_spi_read(sspi, SUN6I_TFR_CTL_REG); + + if (spi->mode & SPI_CPOL) + reg |= SUN6I_TFR_CTL_CPOL; + else + reg &= ~SUN6I_TFR_CTL_CPOL; + + if (spi->mode & SPI_CPHA) + reg |= SUN6I_TFR_CTL_CPHA; + else + reg &= ~SUN6I_TFR_CTL_CPHA; + + if (spi->mode & SPI_LSB_FIRST) + reg |= SUN6I_TFR_CTL_FBS; + else + reg &= ~SUN6I_TFR_CTL_FBS; + + /* + * If it's a TX only transfer, we don't want to fill the RX + * FIFO with bogus data + */ + if (sspi->rx_buf) + reg &= ~SUN6I_TFR_CTL_DHB; + else + reg |= SUN6I_TFR_CTL_DHB; + + /* We want to control the chip select manually */ + reg |= SUN6I_TFR_CTL_CS_MANUAL; + + sun6i_spi_write(sspi, SUN6I_TFR_CTL_REG, reg); + + /* Ensure that we have a parent clock fast enough */ + mclk_rate = clk_get_rate(sspi->mclk); + if (mclk_rate < (2 * spi->max_speed_hz)) { + clk_set_rate(sspi->mclk, 2 * spi->max_speed_hz); + mclk_rate = clk_get_rate(sspi->mclk); + } + + /* + * Setup clock divider. + * + * We have two choices there. Either we can use the clock + * divide rate 1, which is calculated thanks to this formula: + * SPI_CLK = MOD_CLK / (2 ^ cdr) + * Or we can use CDR2, which is calculated with the formula: + * SPI_CLK = MOD_CLK / (2 * (cdr + 1)) + * Wether we use the former or the latter is set through the + * DRS bit. + * + * First try CDR2, and if we can't reach the expected + * frequency, fall back to CDR1. + */ + div = mclk_rate / (2 * spi->max_speed_hz); + if (div <= (SUN6I_CLK_CTL_CDR2_MASK + 1)) { + if (div > 0) + div--; + + reg = SUN6I_CLK_CTL_CDR2(div) | SUN6I_CLK_CTL_DRS; + } else { + div = ilog2(mclk_rate) - ilog2(spi->max_speed_hz); + reg = SUN6I_CLK_CTL_CDR1(div); + } + + sun6i_spi_write(sspi, SUN6I_CLK_CTL_REG, reg); + + /* Setup the transfer now... */ + if (sspi->tx_buf) + tx_len = tfr->len; + + /* Setup the counters */ + sun6i_spi_write(sspi, SUN6I_BURST_CNT_REG, SUN6I_BURST_CNT(tfr->len)); + sun6i_spi_write(sspi, SUN6I_XMIT_CNT_REG, SUN6I_XMIT_CNT(tx_len)); + sun6i_spi_write(sspi, SUN6I_BURST_CTL_CNT_REG, + SUN6I_BURST_CTL_CNT_STC(tx_len)); + + /* Fill the TX FIFO */ + sun6i_spi_fill_fifo(sspi, SUN6I_FIFO_DEPTH); + + /* Enable the interrupts */ + sun6i_spi_write(sspi, SUN6I_INT_CTL_REG, SUN6I_INT_CTL_TC); + + /* Start the transfer */ + reg = sun6i_spi_read(sspi, SUN6I_TFR_CTL_REG); + sun6i_spi_write(sspi, SUN6I_TFR_CTL_REG, reg | SUN6I_TFR_CTL_XCH); + + timeout = wait_for_completion_timeout(&sspi->done, + msecs_to_jiffies(1000)); + if (!timeout) { + ret = -ETIMEDOUT; + goto out; + } + + sun6i_spi_drain_fifo(sspi, SUN6I_FIFO_DEPTH); + +out: + sun6i_spi_write(sspi, SUN6I_INT_CTL_REG, 0); + + return ret; +} + +static irqreturn_t sun6i_spi_handler(int irq, void *dev_id) +{ + struct sun6i_spi *sspi = dev_id; + u32 status = sun6i_spi_read(sspi, SUN6I_INT_STA_REG); + + /* Transfer complete */ + if (status & SUN6I_INT_CTL_TC) { + sun6i_spi_write(sspi, SUN6I_INT_STA_REG, SUN6I_INT_CTL_TC); + complete(&sspi->done); + return IRQ_HANDLED; + } + + return IRQ_NONE; +} + +static int sun6i_spi_runtime_resume(struct device *dev) +{ + struct spi_master *master = dev_get_drvdata(dev); + struct sun6i_spi *sspi = spi_master_get_devdata(master); + int ret; + + ret = clk_prepare_enable(sspi->hclk); + if (ret) { + dev_err(dev, "Couldn't enable AHB clock\n"); + goto out; + } + + ret = clk_prepare_enable(sspi->mclk); + if (ret) { + dev_err(dev, "Couldn't enable module clock\n"); + goto err; + } + + ret = reset_control_deassert(sspi->rstc); + if (ret) { + dev_err(dev, "Couldn't deassert the device from reset\n"); + goto err2; + } + + sun6i_spi_write(sspi, SUN6I_GBL_CTL_REG, + SUN6I_GBL_CTL_BUS_ENABLE | SUN6I_GBL_CTL_MASTER | SUN6I_GBL_CTL_TP); + + return 0; + +err2: + clk_disable_unprepare(sspi->mclk); +err: + clk_disable_unprepare(sspi->hclk); +out: + return ret; +} + +static int sun6i_spi_runtime_suspend(struct device *dev) +{ + struct spi_master *master = dev_get_drvdata(dev); + struct sun6i_spi *sspi = spi_master_get_devdata(master); + + reset_control_assert(sspi->rstc); + clk_disable_unprepare(sspi->mclk); + clk_disable_unprepare(sspi->hclk); + + return 0; +} + +static int sun6i_spi_probe(struct platform_device *pdev) +{ + struct spi_master *master; + struct sun6i_spi *sspi; + struct resource *res; + int ret = 0, irq; + + master = spi_alloc_master(&pdev->dev, sizeof(struct sun6i_spi)); + if (!master) { + dev_err(&pdev->dev, "Unable to allocate SPI Master\n"); + return -ENOMEM; + } + + platform_set_drvdata(pdev, master); + sspi = spi_master_get_devdata(master); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + sspi->base_addr = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(sspi->base_addr)) { + ret = PTR_ERR(sspi->base_addr); + goto err_free_master; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "No spi IRQ specified\n"); + ret = -ENXIO; + goto err_free_master; + } + + ret = devm_request_irq(&pdev->dev, irq, sun6i_spi_handler, + 0, "sun6i-spi", sspi); + if (ret) { + dev_err(&pdev->dev, "Cannot request IRQ\n"); + goto err_free_master; + } + + sspi->master = master; + master->set_cs = sun6i_spi_set_cs; + master->transfer_one = sun6i_spi_transfer_one; + master->num_chipselect = 4; + master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LSB_FIRST; + master->bits_per_word_mask = SPI_BPW_MASK(8); + master->dev.of_node = pdev->dev.of_node; + master->auto_runtime_pm = true; + + sspi->hclk = devm_clk_get(&pdev->dev, "ahb"); + if (IS_ERR(sspi->hclk)) { + dev_err(&pdev->dev, "Unable to acquire AHB clock\n"); + ret = PTR_ERR(sspi->hclk); + goto err_free_master; + } + + sspi->mclk = devm_clk_get(&pdev->dev, "mod"); + if (IS_ERR(sspi->mclk)) { + dev_err(&pdev->dev, "Unable to acquire module clock\n"); + ret = PTR_ERR(sspi->mclk); + goto err_free_master; + } + + init_completion(&sspi->done); + + sspi->rstc = devm_reset_control_get(&pdev->dev, NULL); + if (IS_ERR(sspi->rstc)) { + dev_err(&pdev->dev, "Couldn't get reset controller\n"); + ret = PTR_ERR(sspi->rstc); + goto err_free_master; + } + + /* + * This wake-up/shutdown pattern is to be able to have the + * device woken up, even if runtime_pm is disabled + */ + ret = sun6i_spi_runtime_resume(&pdev->dev); + if (ret) { + dev_err(&pdev->dev, "Couldn't resume the device\n"); + goto err_free_master; + } + + pm_runtime_set_active(&pdev->dev); + pm_runtime_enable(&pdev->dev); + pm_runtime_idle(&pdev->dev); + + ret = devm_spi_register_master(&pdev->dev, master); + if (ret) { + dev_err(&pdev->dev, "cannot register SPI master\n"); + goto err_pm_disable; + } + + return 0; + +err_pm_disable: + pm_runtime_disable(&pdev->dev); + sun6i_spi_runtime_suspend(&pdev->dev); +err_free_master: + spi_master_put(master); + return ret; +} + +static int sun6i_spi_remove(struct platform_device *pdev) +{ + pm_runtime_disable(&pdev->dev); + + return 0; +} + +static const struct of_device_id sun6i_spi_match[] = { + { .compatible = "allwinner,sun6i-a31-spi", }, + {} +}; +MODULE_DEVICE_TABLE(of, sun6i_spi_match); + +static const struct dev_pm_ops sun6i_spi_pm_ops = { + .runtime_resume = sun6i_spi_runtime_resume, + .runtime_suspend = sun6i_spi_runtime_suspend, +}; + +static struct platform_driver sun6i_spi_driver = { + .probe = sun6i_spi_probe, + .remove = sun6i_spi_remove, + .driver = { + .name = "sun6i-spi", + .owner = THIS_MODULE, + .of_match_table = sun6i_spi_match, + .pm = &sun6i_spi_pm_ops, + }, +}; +module_platform_driver(sun6i_spi_driver); + +MODULE_AUTHOR("Pan Nan <pannan@allwinnertech.com>"); +MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>"); +MODULE_DESCRIPTION("Allwinner A31 SPI controller driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/spi/spi-tegra114.c b/drivers/spi/spi-tegra114.c index 6be661e4c6e1..400649595505 100644 --- a/drivers/spi/spi-tegra114.c +++ b/drivers/spi/spi-tegra114.c @@ -846,8 +846,8 @@ complete_xfer: SPI_COMMAND1); tegra_spi_transfer_delay(xfer->delay_usecs); goto exit; - } else if (msg->transfers.prev == &xfer->transfer_list) { - /* This is the last transfer in message */ + } else if (list_is_last(&xfer->transfer_list, + &msg->transfers)) { if (xfer->cs_change) tspi->cs_control = spi; else { diff --git a/drivers/spi/spi-ti-qspi.c b/drivers/spi/spi-ti-qspi.c index 49ddfc7f12b1..6c211d1910b0 100644 --- a/drivers/spi/spi-ti-qspi.c +++ b/drivers/spi/spi-ti-qspi.c @@ -461,7 +461,6 @@ static int ti_qspi_probe(struct platform_device *pdev) if (res_mmap == NULL) { dev_err(&pdev->dev, "memory mapped resource not required\n"); - return -ENODEV; } } diff --git a/drivers/spi/spi-ti-ssp.c b/drivers/spi/spi-ti-ssp.c deleted file mode 100644 index 7d20e121e4c1..000000000000 --- a/drivers/spi/spi-ti-ssp.c +++ /dev/null @@ -1,378 +0,0 @@ -/* - * Sequencer Serial Port (SSP) based SPI master driver - * - * Copyright (C) 2010 Texas Instruments Inc - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/kernel.h> -#include <linux/err.h> -#include <linux/completion.h> -#include <linux/delay.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/spi/spi.h> -#include <linux/mfd/ti_ssp.h> - -#define MODE_BITS (SPI_CPHA | SPI_CPOL | SPI_CS_HIGH) - -struct ti_ssp_spi { - struct spi_master *master; - struct device *dev; - spinlock_t lock; - struct list_head msg_queue; - struct completion complete; - bool shutdown; - struct workqueue_struct *workqueue; - struct work_struct work; - u8 mode, bpw; - int cs_active; - u32 pc_en, pc_dis, pc_wr, pc_rd; - void (*select)(int cs); -}; - -static u32 ti_ssp_spi_rx(struct ti_ssp_spi *hw) -{ - u32 ret; - - ti_ssp_run(hw->dev, hw->pc_rd, 0, &ret); - return ret; -} - -static void ti_ssp_spi_tx(struct ti_ssp_spi *hw, u32 data) -{ - ti_ssp_run(hw->dev, hw->pc_wr, data << (32 - hw->bpw), NULL); -} - -static int ti_ssp_spi_txrx(struct ti_ssp_spi *hw, struct spi_message *msg, - struct spi_transfer *t) -{ - int count; - - if (hw->bpw <= 8) { - u8 *rx = t->rx_buf; - const u8 *tx = t->tx_buf; - - for (count = 0; count < t->len; count += 1) { - if (t->tx_buf) - ti_ssp_spi_tx(hw, *tx++); - if (t->rx_buf) - *rx++ = ti_ssp_spi_rx(hw); - } - } else if (hw->bpw <= 16) { - u16 *rx = t->rx_buf; - const u16 *tx = t->tx_buf; - - for (count = 0; count < t->len; count += 2) { - if (t->tx_buf) - ti_ssp_spi_tx(hw, *tx++); - if (t->rx_buf) - *rx++ = ti_ssp_spi_rx(hw); - } - } else { - u32 *rx = t->rx_buf; - const u32 *tx = t->tx_buf; - - for (count = 0; count < t->len; count += 4) { - if (t->tx_buf) - ti_ssp_spi_tx(hw, *tx++); - if (t->rx_buf) - *rx++ = ti_ssp_spi_rx(hw); - } - } - - msg->actual_length += count; /* bytes transferred */ - - dev_dbg(&msg->spi->dev, "xfer %s%s, %d bytes, %d bpw, count %d%s\n", - t->tx_buf ? "tx" : "", t->rx_buf ? "rx" : "", t->len, - hw->bpw, count, (count < t->len) ? " (under)" : ""); - - return (count < t->len) ? -EIO : 0; /* left over data */ -} - -static void ti_ssp_spi_chip_select(struct ti_ssp_spi *hw, int cs_active) -{ - cs_active = !!cs_active; - if (cs_active == hw->cs_active) - return; - ti_ssp_run(hw->dev, cs_active ? hw->pc_en : hw->pc_dis, 0, NULL); - hw->cs_active = cs_active; -} - -#define __SHIFT_OUT(bits) (SSP_OPCODE_SHIFT | SSP_OUT_MODE | \ - cs_en | clk | SSP_COUNT((bits) * 2 - 1)) -#define __SHIFT_IN(bits) (SSP_OPCODE_SHIFT | SSP_IN_MODE | \ - cs_en | clk | SSP_COUNT((bits) * 2 - 1)) - -static int ti_ssp_spi_setup_transfer(struct ti_ssp_spi *hw, u8 bpw, u8 mode) -{ - int error, idx = 0; - u32 seqram[16]; - u32 cs_en, cs_dis, clk; - u32 topbits, botbits; - - mode &= MODE_BITS; - if (mode == hw->mode && bpw == hw->bpw) - return 0; - - cs_en = (mode & SPI_CS_HIGH) ? SSP_CS_HIGH : SSP_CS_LOW; - cs_dis = (mode & SPI_CS_HIGH) ? SSP_CS_LOW : SSP_CS_HIGH; - clk = (mode & SPI_CPOL) ? SSP_CLK_HIGH : SSP_CLK_LOW; - - /* Construct instructions */ - - /* Disable Chip Select */ - hw->pc_dis = idx; - seqram[idx++] = SSP_OPCODE_DIRECT | SSP_OUT_MODE | cs_dis | clk; - seqram[idx++] = SSP_OPCODE_STOP | SSP_OUT_MODE | cs_dis | clk; - - /* Enable Chip Select */ - hw->pc_en = idx; - seqram[idx++] = SSP_OPCODE_DIRECT | SSP_OUT_MODE | cs_en | clk; - seqram[idx++] = SSP_OPCODE_STOP | SSP_OUT_MODE | cs_en | clk; - - /* Reads and writes need to be split for bpw > 16 */ - topbits = (bpw > 16) ? 16 : bpw; - botbits = bpw - topbits; - - /* Write */ - hw->pc_wr = idx; - seqram[idx++] = __SHIFT_OUT(topbits) | SSP_ADDR_REG; - if (botbits) - seqram[idx++] = __SHIFT_OUT(botbits) | SSP_DATA_REG; - seqram[idx++] = SSP_OPCODE_STOP | SSP_OUT_MODE | cs_en | clk; - - /* Read */ - hw->pc_rd = idx; - if (botbits) - seqram[idx++] = __SHIFT_IN(botbits) | SSP_ADDR_REG; - seqram[idx++] = __SHIFT_IN(topbits) | SSP_DATA_REG; - seqram[idx++] = SSP_OPCODE_STOP | SSP_OUT_MODE | cs_en | clk; - - error = ti_ssp_load(hw->dev, 0, seqram, idx); - if (error < 0) - return error; - - error = ti_ssp_set_mode(hw->dev, ((mode & SPI_CPHA) ? - 0 : SSP_EARLY_DIN)); - if (error < 0) - return error; - - hw->bpw = bpw; - hw->mode = mode; - - return error; -} - -static void ti_ssp_spi_work(struct work_struct *work) -{ - struct ti_ssp_spi *hw = container_of(work, struct ti_ssp_spi, work); - - spin_lock(&hw->lock); - - while (!list_empty(&hw->msg_queue)) { - struct spi_message *m; - struct spi_device *spi; - struct spi_transfer *t = NULL; - int status = 0; - - m = container_of(hw->msg_queue.next, struct spi_message, - queue); - - list_del_init(&m->queue); - - spin_unlock(&hw->lock); - - spi = m->spi; - - if (hw->select) - hw->select(spi->chip_select); - - list_for_each_entry(t, &m->transfers, transfer_list) { - int bpw = spi->bits_per_word; - int xfer_status; - - if (t->bits_per_word) - bpw = t->bits_per_word; - - if (ti_ssp_spi_setup_transfer(hw, bpw, spi->mode) < 0) - break; - - ti_ssp_spi_chip_select(hw, 1); - - xfer_status = ti_ssp_spi_txrx(hw, m, t); - if (xfer_status < 0) - status = xfer_status; - - if (t->delay_usecs) - udelay(t->delay_usecs); - - if (t->cs_change) - ti_ssp_spi_chip_select(hw, 0); - } - - ti_ssp_spi_chip_select(hw, 0); - m->status = status; - m->complete(m->context); - - spin_lock(&hw->lock); - } - - if (hw->shutdown) - complete(&hw->complete); - - spin_unlock(&hw->lock); -} - -static int ti_ssp_spi_transfer(struct spi_device *spi, struct spi_message *m) -{ - struct ti_ssp_spi *hw; - struct spi_transfer *t; - int error = 0; - - m->actual_length = 0; - m->status = -EINPROGRESS; - - hw = spi_master_get_devdata(spi->master); - - if (list_empty(&m->transfers) || !m->complete) - return -EINVAL; - - list_for_each_entry(t, &m->transfers, transfer_list) { - if (t->len && !(t->rx_buf || t->tx_buf)) { - dev_err(&spi->dev, "invalid xfer, no buffer\n"); - return -EINVAL; - } - - if (t->len && t->rx_buf && t->tx_buf) { - dev_err(&spi->dev, "invalid xfer, full duplex\n"); - return -EINVAL; - } - } - - spin_lock(&hw->lock); - if (hw->shutdown) { - error = -ESHUTDOWN; - goto error_unlock; - } - list_add_tail(&m->queue, &hw->msg_queue); - queue_work(hw->workqueue, &hw->work); -error_unlock: - spin_unlock(&hw->lock); - return error; -} - -static int ti_ssp_spi_probe(struct platform_device *pdev) -{ - const struct ti_ssp_spi_data *pdata; - struct ti_ssp_spi *hw; - struct spi_master *master; - struct device *dev = &pdev->dev; - int error = 0; - - pdata = dev_get_platdata(dev); - if (!pdata) { - dev_err(dev, "platform data not found\n"); - return -EINVAL; - } - - master = spi_alloc_master(dev, sizeof(struct ti_ssp_spi)); - if (!master) { - dev_err(dev, "cannot allocate SPI master\n"); - return -ENOMEM; - } - - hw = spi_master_get_devdata(master); - platform_set_drvdata(pdev, hw); - - hw->master = master; - hw->dev = dev; - hw->select = pdata->select; - - spin_lock_init(&hw->lock); - init_completion(&hw->complete); - INIT_LIST_HEAD(&hw->msg_queue); - INIT_WORK(&hw->work, ti_ssp_spi_work); - - hw->workqueue = create_singlethread_workqueue(dev_name(dev)); - if (!hw->workqueue) { - error = -ENOMEM; - dev_err(dev, "work queue creation failed\n"); - goto error_wq; - } - - error = ti_ssp_set_iosel(hw->dev, pdata->iosel); - if (error < 0) { - dev_err(dev, "io setup failed\n"); - goto error_iosel; - } - - master->bus_num = pdev->id; - master->num_chipselect = pdata->num_cs; - master->mode_bits = MODE_BITS; - master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 32); - master->flags = SPI_MASTER_HALF_DUPLEX; - master->transfer = ti_ssp_spi_transfer; - - error = spi_register_master(master); - if (error) { - dev_err(dev, "master registration failed\n"); - goto error_reg; - } - - return 0; - -error_reg: -error_iosel: - destroy_workqueue(hw->workqueue); -error_wq: - spi_master_put(master); - return error; -} - -static int ti_ssp_spi_remove(struct platform_device *pdev) -{ - struct ti_ssp_spi *hw = platform_get_drvdata(pdev); - int error; - - hw->shutdown = 1; - while (!list_empty(&hw->msg_queue)) { - error = wait_for_completion_interruptible(&hw->complete); - if (error < 0) { - hw->shutdown = 0; - return error; - } - } - destroy_workqueue(hw->workqueue); - spi_unregister_master(hw->master); - - return 0; -} - -static struct platform_driver ti_ssp_spi_driver = { - .probe = ti_ssp_spi_probe, - .remove = ti_ssp_spi_remove, - .driver = { - .name = "ti-ssp-spi", - .owner = THIS_MODULE, - }, -}; -module_platform_driver(ti_ssp_spi_driver); - -MODULE_DESCRIPTION("SSP SPI Master"); -MODULE_AUTHOR("Cyril Chemparathy"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:ti-ssp-spi"); diff --git a/drivers/spi/spi-topcliff-pch.c b/drivers/spi/spi-topcliff-pch.c index 88eb57e858b3..f406b30af961 100644 --- a/drivers/spi/spi-topcliff-pch.c +++ b/drivers/spi/spi-topcliff-pch.c @@ -332,7 +332,7 @@ static void pch_spi_handler_sub(struct pch_spi_data *data, u32 reg_spsr_val, data->transfer_active = false; wake_up(&data->wait); } else { - dev_err(&data->master->dev, + dev_vdbg(&data->master->dev, "%s : Transfer is not completed", __func__); } @@ -464,20 +464,6 @@ static void pch_spi_reset(struct spi_master *master) pch_spi_writereg(master, PCH_SRST, 0x0); } -static int pch_spi_setup(struct spi_device *pspi) -{ - /* Check baud rate setting */ - /* if baud rate of chip is greater than - max we can support,return error */ - if ((pspi->max_speed_hz) > PCH_MAX_BAUDRATE) - pspi->max_speed_hz = PCH_MAX_BAUDRATE; - - dev_dbg(&pspi->dev, "%s MODE = %x\n", __func__, - (pspi->mode) & (SPI_CPOL | SPI_CPHA)); - - return 0; -} - static int pch_spi_transfer(struct spi_device *pspi, struct spi_message *pmsg) { @@ -486,23 +472,6 @@ static int pch_spi_transfer(struct spi_device *pspi, struct spi_message *pmsg) int retval; unsigned long flags; - /* validate spi message and baud rate */ - if (unlikely(list_empty(&pmsg->transfers) == 1)) { - dev_err(&pspi->dev, "%s list empty\n", __func__); - retval = -EINVAL; - goto err_out; - } - - if (unlikely(pspi->max_speed_hz == 0)) { - dev_err(&pspi->dev, "%s pch_spi_transfer maxspeed=%d\n", - __func__, pspi->max_speed_hz); - retval = -EINVAL; - goto err_out; - } - - dev_dbg(&pspi->dev, - "%s Transfer List not empty. Transfer Speed is set.\n", __func__); - spin_lock_irqsave(&data->lock, flags); /* validate Tx/Rx buffers and Transfer length */ list_for_each_entry(transfer, &pmsg->transfers, transfer_list) { @@ -523,10 +492,6 @@ static int pch_spi_transfer(struct spi_device *pspi, struct spi_message *pmsg) dev_dbg(&pspi->dev, "%s Tx/Rx buffer valid. Transfer length valid\n", __func__); - - /* if baud rate has been specified validate the same */ - if (transfer->speed_hz > PCH_MAX_BAUDRATE) - transfer->speed_hz = PCH_MAX_BAUDRATE; } spin_unlock_irqrestore(&data->lock, flags); @@ -1151,8 +1116,7 @@ static void pch_spi_handle_dma(struct pch_spi_data *data, int *bpw) dma->nent = num; dma->desc_tx = desc_tx; - dev_dbg(&data->master->dev, "\n%s:Pulling down SSN low - writing " - "0x2 to SSNXCR\n", __func__); + dev_dbg(&data->master->dev, "%s:Pulling down SSN low - writing 0x2 to SSNXCR\n", __func__); spin_lock_irqsave(&data->lock, flags); pch_spi_writereg(data->master, PCH_SSNXCR, SSN_LOW); @@ -1418,10 +1382,10 @@ static int pch_spi_pd_probe(struct platform_device *plat_dev) /* initialize members of SPI master */ master->num_chipselect = PCH_MAX_CS; - master->setup = pch_spi_setup; master->transfer = pch_spi_transfer; master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST; master->bits_per_word_mask = SPI_BPW_MASK(8) | SPI_BPW_MASK(16); + master->max_speed_hz = PCH_MAX_BAUDRATE; data->board_dat = board_dat; data->plat_dev = plat_dev; @@ -1605,8 +1569,7 @@ static struct platform_driver pch_spi_pd_driver = { .resume = pch_spi_pd_resume }; -static int pch_spi_probe(struct pci_dev *pdev, - const struct pci_device_id *id) +static int pch_spi_probe(struct pci_dev *pdev, const struct pci_device_id *id) { struct pch_spi_board_data *board_dat; struct platform_device *pd_dev = NULL; @@ -1676,6 +1639,8 @@ static int pch_spi_probe(struct pci_dev *pdev, return 0; err_platform_device: + while (--i >= 0) + platform_device_unregister(pd_dev_save->pd_save[i]); pci_disable_device(pdev); pci_enable_device: pci_release_regions(pdev); diff --git a/drivers/spi/spi-txx9.c b/drivers/spi/spi-txx9.c index 6191ced514b2..820b499816f8 100644 --- a/drivers/spi/spi-txx9.c +++ b/drivers/spi/spi-txx9.c @@ -80,7 +80,6 @@ struct txx9spi { void __iomem *membase; int baseclk; struct clk *clk; - u32 max_speed_hz, min_speed_hz; int last_chipselect; int last_chipselect_val; }; @@ -117,9 +116,7 @@ static int txx9spi_setup(struct spi_device *spi) { struct txx9spi *c = spi_master_get_devdata(spi->master); - if (!spi->max_speed_hz - || spi->max_speed_hz > c->max_speed_hz - || spi->max_speed_hz < c->min_speed_hz) + if (!spi->max_speed_hz) return -EINVAL; if (gpio_direction_output(spi->chip_select, @@ -309,15 +306,8 @@ static int txx9spi_transfer(struct spi_device *spi, struct spi_message *m) /* check each transfer's parameters */ list_for_each_entry(t, &m->transfers, transfer_list) { - u32 speed_hz = t->speed_hz ? : spi->max_speed_hz; - u8 bits_per_word = t->bits_per_word; - if (!t->tx_buf && !t->rx_buf && t->len) return -EINVAL; - if (t->len & ((bits_per_word >> 3) - 1)) - return -EINVAL; - if (speed_hz < c->min_speed_hz || speed_hz > c->max_speed_hz) - return -EINVAL; } spin_lock_irqsave(&c->lock, flags); @@ -360,17 +350,12 @@ static int txx9spi_probe(struct platform_device *dev) goto exit; } c->baseclk = clk_get_rate(c->clk); - c->min_speed_hz = DIV_ROUND_UP(c->baseclk, SPI_MAX_DIVIDER + 1); - c->max_speed_hz = c->baseclk / (SPI_MIN_DIVIDER + 1); + master->min_speed_hz = DIV_ROUND_UP(c->baseclk, SPI_MAX_DIVIDER + 1); + master->max_speed_hz = c->baseclk / (SPI_MIN_DIVIDER + 1); res = platform_get_resource(dev, IORESOURCE_MEM, 0); - if (!res) - goto exit_busy; - if (!devm_request_mem_region(&dev->dev, res->start, resource_size(res), - "spi_txx9")) - goto exit_busy; - c->membase = devm_ioremap(&dev->dev, res->start, resource_size(res)); - if (!c->membase) + c->membase = devm_ioremap_resource(&dev->dev, res); + if (IS_ERR(c->membase)) goto exit_busy; /* enter config mode */ diff --git a/drivers/spi/spi-xcomm.c b/drivers/spi/spi-xcomm.c index 350a76b7e8d4..bb478dccf1d8 100644 --- a/drivers/spi/spi-xcomm.c +++ b/drivers/spi/spi-xcomm.c @@ -73,15 +73,13 @@ static void spi_xcomm_chipselect(struct spi_xcomm *spi_xcomm, static int spi_xcomm_setup_transfer(struct spi_xcomm *spi_xcomm, struct spi_device *spi, struct spi_transfer *t, unsigned int *settings) { - unsigned int speed; - if (t->len > 62) return -EINVAL; - speed = t->speed_hz ? t->speed_hz : spi->max_speed_hz; + if (t->speed_hz != spi_xcomm->current_speed) { + unsigned int divider; - if (speed != spi_xcomm->current_speed) { - unsigned int divider = DIV_ROUND_UP(SPI_XCOMM_CLOCK, speed); + divider = DIV_ROUND_UP(SPI_XCOMM_CLOCK, t->speed_hz); if (divider >= 64) *settings |= SPI_XCOMM_SETTINGS_CLOCK_DIV_64; else if (divider >= 16) @@ -89,7 +87,7 @@ static int spi_xcomm_setup_transfer(struct spi_xcomm *spi_xcomm, else *settings |= SPI_XCOMM_SETTINGS_CLOCK_DIV_4; - spi_xcomm->current_speed = speed; + spi_xcomm->current_speed = t->speed_hz; } if (spi->mode & SPI_CPOL) @@ -147,8 +145,6 @@ static int spi_xcomm_transfer_one(struct spi_master *master, int status = 0; bool is_last; - is_first = true; - spi_xcomm_chipselect(spi_xcomm, spi, true); list_for_each_entry(t, &msg->transfers, transfer_list) { diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index ffc1a2ebc4ca..4eb9bf02996c 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -756,6 +756,7 @@ static int spi_transfer_one_message(struct spi_master *master, struct spi_transfer *xfer; bool keep_cs = false; int ret = 0; + int ms = 1; spi_set_cs(msg->spi, true); @@ -773,7 +774,16 @@ static int spi_transfer_one_message(struct spi_master *master, if (ret > 0) { ret = 0; - wait_for_completion(&master->xfer_completion); + ms = xfer->len * 8 * 1000 / xfer->speed_hz; + ms += 10; /* some tolerance */ + + ms = wait_for_completion_timeout(&master->xfer_completion, + msecs_to_jiffies(ms)); + } + + if (ms == 0) { + dev_err(&msg->spi->dev, "SPI transfer timed out\n"); + msg->status = -ETIMEDOUT; } trace_spi_transfer_stop(msg, xfer); |