diff options
Diffstat (limited to 'drivers/staging/mt7621-eth/Documentation/devicetree/bindings/net/mediatek-net-gsw.txt')
-rw-r--r-- | drivers/staging/mt7621-eth/Documentation/devicetree/bindings/net/mediatek-net-gsw.txt | 48 |
1 files changed, 0 insertions, 48 deletions
diff --git a/drivers/staging/mt7621-eth/Documentation/devicetree/bindings/net/mediatek-net-gsw.txt b/drivers/staging/mt7621-eth/Documentation/devicetree/bindings/net/mediatek-net-gsw.txt deleted file mode 100644 index 596b38552697..000000000000 --- a/drivers/staging/mt7621-eth/Documentation/devicetree/bindings/net/mediatek-net-gsw.txt +++ /dev/null @@ -1,48 +0,0 @@ -Mediatek Gigabit Switch -======================= - -The mediatek gigabit switch can be found on Mediatek SoCs. - -Required properties: -- compatible: Should be "mediatek,mt7620-gsw", "mediatek,mt7621-gsw", - "mediatek,mt7623-gsw" -- reg: Address and length of the register set for the device -- interrupts: Should contain the gigabit switches interrupt - - -Additional required properties for ARM based SoCs: -- mediatek,reset-pin: phandle describing the reset GPIO -- clocks: the clocks used by the switch -- clock-names: the names of the clocks listed in the clocks property - these should be "trgpll", "esw", "gp2", "gp1" -- mt7530-supply: the phandle of the regulator used to power the switch -- mediatek,pctl-regmap: phandle to the port control regmap. this is used to - setup the drive current - - -Optional properties: -- interrupt-parent: Should be the phandle for the interrupt controller - that services interrupts for this device - -Example: - -gsw: switch@1b100000 { - compatible = "mediatek,mt7623-gsw"; - reg = <0 0x1b110000 0 0x300000>; - - interrupt-parent = <&pio>; - interrupts = <168 IRQ_TYPE_EDGE_RISING>; - - clocks = <&apmixedsys CLK_APMIXED_TRGPLL>, - <ðsys CLK_ETHSYS_ESW>, - <ðsys CLK_ETHSYS_GP2>, - <ðsys CLK_ETHSYS_GP1>; - clock-names = "trgpll", "esw", "gp2", "gp1"; - - mt7530-supply = <&mt6323_vpa_reg>; - - mediatek,pctl-regmap = <&syscfg_pctl_a>; - mediatek,reset-pin = <&pio 15 0>; - - status = "okay"; -}; |