summaryrefslogtreecommitdiffstats
path: root/drivers/tty/serial/8250/8250_dw.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty/serial/8250/8250_dw.c')
-rw-r--r--drivers/tty/serial/8250/8250_dw.c121
1 files changed, 55 insertions, 66 deletions
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index c1d43f040c43..a3acbf0f5da1 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -9,7 +9,6 @@
* LCR is written whilst busy. If it is, then a busy detect interrupt is
* raised, the LCR needs to be rewritten and the uart status register read.
*/
-#include <linux/acpi.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/device.h>
@@ -17,7 +16,6 @@
#include <linux/mod_devicetable.h>
#include <linux/module.h>
#include <linux/notifier.h>
-#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/property.h>
@@ -56,6 +54,7 @@
#define DW_UART_QUIRK_ARMADA_38X BIT(1)
#define DW_UART_QUIRK_SKIP_SET_RATE BIT(2)
#define DW_UART_QUIRK_IS_DMA_FC BIT(3)
+#define DW_UART_QUIRK_APMC0D08 BIT(4)
static inline struct dw8250_data *clk_to_dw8250_data(struct notifier_block *nb)
{
@@ -445,44 +444,29 @@ static void dw8250_prepare_rx_dma(struct uart_8250_port *p)
static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data)
{
- struct device_node *np = p->dev->of_node;
+ unsigned int quirks = data->pdata ? data->pdata->quirks : 0;
- if (np) {
- unsigned int quirks = data->pdata->quirks;
- int id;
-
- /* get index of serial line, if found in DT aliases */
- id = of_alias_get_id(np, "serial");
- if (id >= 0)
- p->line = id;
#ifdef CONFIG_64BIT
- if (quirks & DW_UART_QUIRK_OCTEON) {
- p->serial_in = dw8250_serial_inq;
- p->serial_out = dw8250_serial_outq;
- p->flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_FIXED_TYPE;
- p->type = PORT_OCTEON;
- data->skip_autocfg = true;
- }
+ if (quirks & DW_UART_QUIRK_OCTEON) {
+ p->serial_in = dw8250_serial_inq;
+ p->serial_out = dw8250_serial_outq;
+ p->flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_FIXED_TYPE;
+ p->type = PORT_OCTEON;
+ data->skip_autocfg = true;
+ }
#endif
- if (of_device_is_big_endian(np)) {
- p->iotype = UPIO_MEM32BE;
- p->serial_in = dw8250_serial_in32be;
- p->serial_out = dw8250_serial_out32be;
- }
-
- if (quirks & DW_UART_QUIRK_ARMADA_38X)
- p->serial_out = dw8250_serial_out38x;
- if (quirks & DW_UART_QUIRK_SKIP_SET_RATE)
- p->set_termios = dw8250_do_set_termios;
- if (quirks & DW_UART_QUIRK_IS_DMA_FC) {
- data->data.dma.txconf.device_fc = 1;
- data->data.dma.rxconf.device_fc = 1;
- data->data.dma.prepare_tx_dma = dw8250_prepare_tx_dma;
- data->data.dma.prepare_rx_dma = dw8250_prepare_rx_dma;
- }
-
- } else if (acpi_dev_present("APMC0D08", NULL, -1)) {
+ if (quirks & DW_UART_QUIRK_ARMADA_38X)
+ p->serial_out = dw8250_serial_out38x;
+ if (quirks & DW_UART_QUIRK_SKIP_SET_RATE)
+ p->set_termios = dw8250_do_set_termios;
+ if (quirks & DW_UART_QUIRK_IS_DMA_FC) {
+ data->data.dma.txconf.device_fc = 1;
+ data->data.dma.rxconf.device_fc = 1;
+ data->data.dma.prepare_tx_dma = dw8250_prepare_tx_dma;
+ data->data.dma.prepare_rx_dma = dw8250_prepare_rx_dma;
+ }
+ if (quirks & DW_UART_QUIRK_APMC0D08) {
p->iotype = UPIO_MEM32;
p->regshift = 2;
p->serial_in = dw8250_serial_in32;
@@ -510,39 +494,21 @@ static int dw8250_probe(struct platform_device *pdev)
struct device *dev = &pdev->dev;
struct dw8250_data *data;
struct resource *regs;
- int irq;
int err;
- u32 val;
regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!regs)
return dev_err_probe(dev, -EINVAL, "no registers defined\n");
- irq = platform_get_irq_optional(pdev, 0);
- /* no interrupt -> fall back to polling */
- if (irq == -ENXIO)
- irq = 0;
- if (irq < 0)
- return irq;
-
spin_lock_init(&p->lock);
- p->mapbase = regs->start;
- p->irq = irq;
p->handle_irq = dw8250_handle_irq;
p->pm = dw8250_do_pm;
p->type = PORT_8250;
- p->flags = UPF_SHARE_IRQ | UPF_FIXED_PORT;
+ p->flags = UPF_FIXED_PORT;
p->dev = dev;
- p->iotype = UPIO_MEM;
- p->serial_in = dw8250_serial_in;
- p->serial_out = dw8250_serial_out;
p->set_ldisc = dw8250_set_ldisc;
p->set_termios = dw8250_set_termios;
- p->membase = devm_ioremap(dev, regs->start, resource_size(regs));
- if (!p->membase)
- return -ENOMEM;
-
data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
@@ -554,15 +520,35 @@ static int dw8250_probe(struct platform_device *pdev)
data->uart_16550_compatible = device_property_read_bool(dev,
"snps,uart-16550-compatible");
- err = device_property_read_u32(dev, "reg-shift", &val);
- if (!err)
- p->regshift = val;
+ p->mapbase = regs->start;
+ p->mapsize = resource_size(regs);
- err = device_property_read_u32(dev, "reg-io-width", &val);
- if (!err && val == 4) {
- p->iotype = UPIO_MEM32;
+ p->membase = devm_ioremap(dev, p->mapbase, p->mapsize);
+ if (!p->membase)
+ return -ENOMEM;
+
+ err = uart_read_port_properties(p);
+ /* no interrupt -> fall back to polling */
+ if (err == -ENXIO)
+ err = 0;
+ if (err)
+ return err;
+
+ switch (p->iotype) {
+ case UPIO_MEM:
+ p->serial_in = dw8250_serial_in;
+ p->serial_out = dw8250_serial_out;
+ break;
+ case UPIO_MEM32:
p->serial_in = dw8250_serial_in32;
p->serial_out = dw8250_serial_out32;
+ break;
+ case UPIO_MEM32BE:
+ p->serial_in = dw8250_serial_in32be;
+ p->serial_out = dw8250_serial_out32be;
+ break;
+ default:
+ return -ENODEV;
}
if (device_property_read_bool(dev, "dcd-override")) {
@@ -589,15 +575,13 @@ static int dw8250_probe(struct platform_device *pdev)
data->msr_mask_off |= UART_MSR_TERI;
}
- /* Always ask for fixed clock rate from a property. */
- device_property_read_u32(dev, "clock-frequency", &p->uartclk);
-
/* If there is separate baudclk, get the rate from it. */
data->clk = devm_clk_get_optional_enabled(dev, "baudclk");
if (data->clk == NULL)
data->clk = devm_clk_get_optional_enabled(dev, NULL);
if (IS_ERR(data->clk))
- return PTR_ERR(data->clk);
+ return dev_err_probe(dev, PTR_ERR(data->clk),
+ "failed to get baudclk\n");
INIT_WORK(&data->clk_work, dw8250_clk_work_cb);
data->clk_notifier.notifier_call = dw8250_clk_notifier_cb;
@@ -762,13 +746,18 @@ static const struct of_device_id dw8250_of_match[] = {
};
MODULE_DEVICE_TABLE(of, dw8250_of_match);
+static const struct dw8250_platform_data dw8250_apmc0d08 = {
+ .usr_reg = DW_UART_USR,
+ .quirks = DW_UART_QUIRK_APMC0D08,
+};
+
static const struct acpi_device_id dw8250_acpi_match[] = {
{ "80860F0A", (kernel_ulong_t)&dw8250_dw_apb },
{ "8086228A", (kernel_ulong_t)&dw8250_dw_apb },
{ "AMD0020", (kernel_ulong_t)&dw8250_dw_apb },
{ "AMDI0020", (kernel_ulong_t)&dw8250_dw_apb },
{ "AMDI0022", (kernel_ulong_t)&dw8250_dw_apb },
- { "APMC0D08", (kernel_ulong_t)&dw8250_dw_apb},
+ { "APMC0D08", (kernel_ulong_t)&dw8250_apmc0d08 },
{ "BRCM2032", (kernel_ulong_t)&dw8250_dw_apb },
{ "HISI0031", (kernel_ulong_t)&dw8250_dw_apb },
{ "INT33C4", (kernel_ulong_t)&dw8250_dw_apb },