summaryrefslogtreecommitdiffstats
path: root/drivers/usb/gadget/s3c-hsotg.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/gadget/s3c-hsotg.c')
-rw-r--r--drivers/usb/gadget/s3c-hsotg.c57
1 files changed, 57 insertions, 0 deletions
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index 1f73b485732d..26193eceb323 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -297,6 +297,12 @@ static void s3c_hsotg_ctrl_epint(struct s3c_hsotg *hsotg,
*/
static void s3c_hsotg_init_fifo(struct s3c_hsotg *hsotg)
{
+ unsigned int ep;
+ unsigned int addr;
+ unsigned int size;
+ int timeout;
+ u32 val;
+
/* the ryu 2.6.24 release ahs
writel(0x1C0, hsotg->regs + S3C_GRXFSIZ);
writel(S3C_GNPTXFSIZ_NPTxFStAddr(0x200) |
@@ -310,6 +316,51 @@ static void s3c_hsotg_init_fifo(struct s3c_hsotg *hsotg)
writel(S3C_GNPTXFSIZ_NPTxFStAddr(2048) |
S3C_GNPTXFSIZ_NPTxFDep(0x1C0),
hsotg->regs + S3C_GNPTXFSIZ);
+
+ /* arange all the rest of the TX FIFOs, as some versions of this
+ * block have overlapping default addresses. This also ensures
+ * that if the settings have been changed, then they are set to
+ * known values. */
+
+ /* start at the end of the GNPTXFSIZ, rounded up */
+ addr = 2048 + 1024;
+ size = 768;
+
+ /* currently we allocate TX FIFOs for all possible endpoints,
+ * and assume that they are all the same size. */
+
+ for (ep = 0; ep <= 15; ep++) {
+ val = addr;
+ val |= size << S3C_DPTXFSIZn_DPTxFSize_SHIFT;
+ addr += size;
+
+ writel(val, hsotg->regs + S3C_DPTXFSIZn(ep));
+ }
+
+ /* according to p428 of the design guide, we need to ensure that
+ * all fifos are flushed before continuing */
+
+ writel(S3C_GRSTCTL_TxFNum(0x10) | S3C_GRSTCTL_TxFFlsh |
+ S3C_GRSTCTL_RxFFlsh, hsotg->regs + S3C_GRSTCTL);
+
+ /* wait until the fifos are both flushed */
+ timeout = 100;
+ while (1) {
+ val = readl(hsotg->regs + S3C_GRSTCTL);
+
+ if ((val & (S3C_GRSTCTL_TxFFlsh | S3C_GRSTCTL_RxFFlsh)) == 0)
+ break;
+
+ if (--timeout == 0) {
+ dev_err(hsotg->dev,
+ "%s: timeout flushing fifos (GRSTCTL=%08x)\n",
+ __func__, val);
+ }
+
+ udelay(1);
+ }
+
+ dev_dbg(hsotg->dev, "FIFOs reset, timeout at %d\n", timeout);
}
/**
@@ -2574,6 +2625,9 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver)
writel(S3C_DCTL_CGOUTNak | S3C_DCTL_CGNPInNAK,
hsotg->regs + S3C_DCTL);
+ /* must be at-least 3ms to allow bus to see disconnect */
+ msleep(3);
+
/* remove the soft-disconnect and let's go */
__bic32(hsotg->regs + S3C_DCTL, S3C_DCTL_SftDiscon);
@@ -2730,6 +2784,9 @@ static void s3c_hsotg_init(struct s3c_hsotg *hsotg)
writel(0, hsotg->regs + S3C_DAINTMSK);
+ /* Be in disconnected state until gadget is registered */
+ __orr32(hsotg->regs + S3C_DCTL, S3C_DCTL_SftDiscon);
+
if (0) {
/* post global nak until we're ready */
writel(S3C_DCTL_SGNPInNAK | S3C_DCTL_SGOUTNak,