summaryrefslogtreecommitdiffstats
path: root/drivers/usb/host
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/host')
-rw-r--r--drivers/usb/host/Kconfig22
-rw-r--r--drivers/usb/host/Makefile3
-rw-r--r--drivers/usb/host/ehci-atmel.c102
-rw-r--r--drivers/usb/host/ehci-fsl.c1
-rw-r--r--drivers/usb/host/ehci-grlib.c1
-rw-r--r--drivers/usb/host/ehci-hcd.c6
-rw-r--r--drivers/usb/host/ehci-hub.c8
-rw-r--r--drivers/usb/host/ehci-pci.c27
-rw-r--r--drivers/usb/host/ehci-platform.c92
-rw-r--r--drivers/usb/host/ehci-pmcmsp.c1
-rw-r--r--drivers/usb/host/ehci-ppc-of.c1
-rw-r--r--drivers/usb/host/ehci-sead3.c1
-rw-r--r--drivers/usb/host/ehci-sh.c1
-rw-r--r--drivers/usb/host/ehci-tilegx.c1
-rw-r--r--drivers/usb/host/ehci-xilinx-of.c1
-rw-r--r--drivers/usb/host/ehci.h2
-rw-r--r--drivers/usb/host/fhci-hub.c9
-rw-r--r--drivers/usb/host/fotg210-hcd.c4
-rw-r--r--drivers/usb/host/fusbh200-hcd.c4
-rw-r--r--drivers/usb/host/imx21-hcd.c5
-rw-r--r--drivers/usb/host/isp116x-hcd.c5
-rw-r--r--drivers/usb/host/isp1362-hcd.c8
-rw-r--r--drivers/usb/host/isp1760-hcd.c2268
-rw-r--r--drivers/usb/host/isp1760-hcd.h208
-rw-r--r--drivers/usb/host/isp1760-if.c477
-rw-r--r--drivers/usb/host/max3421-hcd.c6
-rw-r--r--drivers/usb/host/ohci-at91.c132
-rw-r--r--drivers/usb/host/ohci-da8xx.c1
-rw-r--r--drivers/usb/host/ohci-hub.c10
-rw-r--r--drivers/usb/host/ohci-jz4740.c1
-rw-r--r--drivers/usb/host/ohci-platform.c83
-rw-r--r--drivers/usb/host/ohci-ppc-of.c1
-rw-r--r--drivers/usb/host/ohci-s3c2410.c6
-rw-r--r--drivers/usb/host/ohci-sm501.c1
-rw-r--r--drivers/usb/host/ohci-tilegx.c1
-rw-r--r--drivers/usb/host/ohci-tmio.c1
-rw-r--r--drivers/usb/host/oxu210hp-hcd.c10
-rw-r--r--drivers/usb/host/pci-quirks.c46
-rw-r--r--drivers/usb/host/r8a66597-hcd.c13
-rw-r--r--drivers/usb/host/sl811-hcd.c10
-rw-r--r--drivers/usb/host/u132-hcd.c10
-rw-r--r--drivers/usb/host/uhci-grlib.c1
-rw-r--r--drivers/usb/host/uhci-hub.c5
-rw-r--r--drivers/usb/host/uhci-platform.c1
-rw-r--r--drivers/usb/host/xhci-dbg.c2
-rw-r--r--drivers/usb/host/xhci-mem.c31
-rw-r--r--drivers/usb/host/xhci-ring.c12
-rw-r--r--drivers/usb/host/xhci.c78
-rw-r--r--drivers/usb/host/xhci.h12
49 files changed, 467 insertions, 3265 deletions
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index fafc628480e0..5ad60e46dc2b 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -219,7 +219,7 @@ config USB_EHCI_TEGRA
config USB_EHCI_HCD_PPC_OF
bool "EHCI support for PPC USB controller on OF platform bus"
- depends on PPC_OF
+ depends on PPC
default y
---help---
Enables support for the USB controller present on the PowerPC
@@ -331,20 +331,6 @@ config USB_ISP116X_HCD
To compile this driver as a module, choose M here: the
module will be called isp116x-hcd.
-config USB_ISP1760_HCD
- tristate "ISP 1760 HCD support"
- ---help---
- The ISP1760 chip is a USB 2.0 host controller.
-
- This driver does not support isochronous transfers or OTG.
- This USB controller is usually attached to a non-DMA-Master
- capable bus. NXP's eval kit brings this chip on PCI card
- where the chip itself is behind a PLB to simulate such
- a bus.
-
- To compile this driver as a module, choose M here: the
- module will be called isp1760.
-
config USB_ISP1362_HCD
tristate "ISP1362 HCD support"
---help---
@@ -494,7 +480,7 @@ config USB_OHCI_ATH79
config USB_OHCI_HCD_PPC_OF_BE
bool "OHCI support for OF platform bus (big endian)"
- depends on PPC_OF
+ depends on PPC
select USB_OHCI_BIG_ENDIAN_DESC
select USB_OHCI_BIG_ENDIAN_MMIO
---help---
@@ -503,7 +489,7 @@ config USB_OHCI_HCD_PPC_OF_BE
config USB_OHCI_HCD_PPC_OF_LE
bool "OHCI support for OF platform bus (little endian)"
- depends on PPC_OF
+ depends on PPC
select USB_OHCI_LITTLE_ENDIAN
---help---
Enables support for little-endian USB controllers present on the
@@ -511,7 +497,7 @@ config USB_OHCI_HCD_PPC_OF_LE
config USB_OHCI_HCD_PPC_OF
bool
- depends on PPC_OF
+ depends on PPC
default USB_OHCI_HCD_PPC_OF_BE || USB_OHCI_HCD_PPC_OF_LE
config USB_OHCI_HCD_PCI
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index d6216a493bab..65b0b6a58599 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -5,8 +5,6 @@
# tell define_trace.h where to find the xhci trace header
CFLAGS_xhci-trace.o := -I$(src)
-isp1760-y := isp1760-hcd.o isp1760-if.o
-
fhci-y := fhci-hcd.o fhci-hub.o fhci-q.o
fhci-y += fhci-mem.o fhci-tds.o fhci-sched.o
@@ -69,7 +67,6 @@ obj-$(CONFIG_USB_SL811_HCD) += sl811-hcd.o
obj-$(CONFIG_USB_SL811_CS) += sl811_cs.o
obj-$(CONFIG_USB_U132_HCD) += u132-hcd.o
obj-$(CONFIG_USB_R8A66597_HCD) += r8a66597-hcd.o
-obj-$(CONFIG_USB_ISP1760_HCD) += isp1760.o
obj-$(CONFIG_USB_HWA_HCD) += hwa-hc.o
obj-$(CONFIG_USB_IMX21_HCD) += imx21-hcd.o
obj-$(CONFIG_USB_FSL_MPH_DR_OF) += fsl-mph-dr-of.o
diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c
index 56a88506febe..663f7908b15c 100644
--- a/drivers/usb/host/ehci-atmel.c
+++ b/drivers/usb/host/ehci-atmel.c
@@ -27,44 +27,66 @@
#define DRIVER_DESC "EHCI Atmel driver"
static const char hcd_name[] = "ehci-atmel";
-static struct hc_driver __read_mostly ehci_atmel_hc_driver;
/* interface and function clocks */
-static struct clk *iclk, *fclk, *uclk;
-static int clocked;
+#define hcd_to_atmel_ehci_priv(h) \
+ ((struct atmel_ehci_priv *)hcd_to_ehci(h)->priv)
+
+struct atmel_ehci_priv {
+ struct clk *iclk;
+ struct clk *fclk;
+ struct clk *uclk;
+ bool clocked;
+};
+
+static struct hc_driver __read_mostly ehci_atmel_hc_driver;
+
+static const struct ehci_driver_overrides ehci_atmel_drv_overrides __initconst = {
+ .extra_priv_size = sizeof(struct atmel_ehci_priv),
+};
/*-------------------------------------------------------------------------*/
-static void atmel_start_clock(void)
+static void atmel_start_clock(struct atmel_ehci_priv *atmel_ehci)
{
+ if (atmel_ehci->clocked)
+ return;
if (IS_ENABLED(CONFIG_COMMON_CLK)) {
- clk_set_rate(uclk, 48000000);
- clk_prepare_enable(uclk);
+ clk_set_rate(atmel_ehci->uclk, 48000000);
+ clk_prepare_enable(atmel_ehci->uclk);
}
- clk_prepare_enable(iclk);
- clk_prepare_enable(fclk);
- clocked = 1;
+ clk_prepare_enable(atmel_ehci->iclk);
+ clk_prepare_enable(atmel_ehci->fclk);
+ atmel_ehci->clocked = true;
}
-static void atmel_stop_clock(void)
+static void atmel_stop_clock(struct atmel_ehci_priv *atmel_ehci)
{
- clk_disable_unprepare(fclk);
- clk_disable_unprepare(iclk);
+ if (!atmel_ehci->clocked)
+ return;
+ clk_disable_unprepare(atmel_ehci->fclk);
+ clk_disable_unprepare(atmel_ehci->iclk);
if (IS_ENABLED(CONFIG_COMMON_CLK))
- clk_disable_unprepare(uclk);
- clocked = 0;
+ clk_disable_unprepare(atmel_ehci->uclk);
+ atmel_ehci->clocked = false;
}
static void atmel_start_ehci(struct platform_device *pdev)
{
+ struct usb_hcd *hcd = platform_get_drvdata(pdev);
+ struct atmel_ehci_priv *atmel_ehci = hcd_to_atmel_ehci_priv(hcd);
+
dev_dbg(&pdev->dev, "start\n");
- atmel_start_clock();
+ atmel_start_clock(atmel_ehci);
}
static void atmel_stop_ehci(struct platform_device *pdev)
{
+ struct usb_hcd *hcd = platform_get_drvdata(pdev);
+ struct atmel_ehci_priv *atmel_ehci = hcd_to_atmel_ehci_priv(hcd);
+
dev_dbg(&pdev->dev, "stop\n");
- atmel_stop_clock();
+ atmel_stop_clock(atmel_ehci);
}
/*-------------------------------------------------------------------------*/
@@ -75,6 +97,7 @@ static int ehci_atmel_drv_probe(struct platform_device *pdev)
const struct hc_driver *driver = &ehci_atmel_hc_driver;
struct resource *res;
struct ehci_hcd *ehci;
+ struct atmel_ehci_priv *atmel_ehci;
int irq;
int retval;
@@ -105,6 +128,7 @@ static int ehci_atmel_drv_probe(struct platform_device *pdev)
retval = -ENOMEM;
goto fail_create_hcd;
}
+ atmel_ehci = hcd_to_atmel_ehci_priv(hcd);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
hcd->regs = devm_ioremap_resource(&pdev->dev, res);
@@ -116,23 +140,23 @@ static int ehci_atmel_drv_probe(struct platform_device *pdev)
hcd->rsrc_start = res->start;
hcd->rsrc_len = resource_size(res);
- iclk = devm_clk_get(&pdev->dev, "ehci_clk");
- if (IS_ERR(iclk)) {
+ atmel_ehci->iclk = devm_clk_get(&pdev->dev, "ehci_clk");
+ if (IS_ERR(atmel_ehci->iclk)) {
dev_err(&pdev->dev, "Error getting interface clock\n");
retval = -ENOENT;
goto fail_request_resource;
}
- fclk = devm_clk_get(&pdev->dev, "uhpck");
- if (IS_ERR(fclk)) {
+ atmel_ehci->fclk = devm_clk_get(&pdev->dev, "uhpck");
+ if (IS_ERR(atmel_ehci->fclk)) {
dev_err(&pdev->dev, "Error getting function clock\n");
retval = -ENOENT;
goto fail_request_resource;
}
if (IS_ENABLED(CONFIG_COMMON_CLK)) {
- uclk = devm_clk_get(&pdev->dev, "usb_clk");
- if (IS_ERR(uclk)) {
+ atmel_ehci->uclk = devm_clk_get(&pdev->dev, "usb_clk");
+ if (IS_ERR(atmel_ehci->uclk)) {
dev_err(&pdev->dev, "failed to get uclk\n");
- retval = PTR_ERR(uclk);
+ retval = PTR_ERR(atmel_ehci->uclk);
goto fail_request_resource;
}
}
@@ -169,11 +193,35 @@ static int ehci_atmel_drv_remove(struct platform_device *pdev)
usb_put_hcd(hcd);
atmel_stop_ehci(pdev);
- fclk = iclk = NULL;
return 0;
}
+#ifdef CONFIG_PM
+static int ehci_atmel_drv_suspend(struct device *dev)
+{
+ struct usb_hcd *hcd = dev_get_drvdata(dev);
+ struct atmel_ehci_priv *atmel_ehci = hcd_to_atmel_ehci_priv(hcd);
+ int ret;
+
+ ret = ehci_suspend(hcd, false);
+ if (ret)
+ return ret;
+
+ atmel_stop_clock(atmel_ehci);
+ return 0;
+}
+
+static int ehci_atmel_drv_resume(struct device *dev)
+{
+ struct usb_hcd *hcd = dev_get_drvdata(dev);
+ struct atmel_ehci_priv *atmel_ehci = hcd_to_atmel_ehci_priv(hcd);
+
+ atmel_start_clock(atmel_ehci);
+ return ehci_resume(hcd, false);
+}
+#endif
+
#ifdef CONFIG_OF
static const struct of_device_id atmel_ehci_dt_ids[] = {
{ .compatible = "atmel,at91sam9g45-ehci" },
@@ -183,12 +231,16 @@ static const struct of_device_id atmel_ehci_dt_ids[] = {
MODULE_DEVICE_TABLE(of, atmel_ehci_dt_ids);
#endif
+static SIMPLE_DEV_PM_OPS(ehci_atmel_pm_ops, ehci_atmel_drv_suspend,
+ ehci_atmel_drv_resume);
+
static struct platform_driver ehci_atmel_driver = {
.probe = ehci_atmel_drv_probe,
.remove = ehci_atmel_drv_remove,
.shutdown = usb_hcd_platform_shutdown,
.driver = {
.name = "atmel-ehci",
+ .pm = &ehci_atmel_pm_ops,
.of_match_table = of_match_ptr(atmel_ehci_dt_ids),
},
};
@@ -199,7 +251,7 @@ static int __init ehci_atmel_init(void)
return -ENODEV;
pr_info("%s: " DRIVER_DESC "\n", hcd_name);
- ehci_init_driver(&ehci_atmel_hc_driver, NULL);
+ ehci_init_driver(&ehci_atmel_hc_driver, &ehci_atmel_drv_overrides);
return platform_driver_register(&ehci_atmel_driver);
}
module_init(ehci_atmel_init);
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index fb7bd0c7dc15..ab4eee3df97a 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -709,7 +709,6 @@ static struct platform_driver ehci_fsl_driver = {
.shutdown = usb_hcd_platform_shutdown,
.driver = {
.name = "fsl-ehci",
- .owner = THIS_MODULE,
.pm = EHCI_FSL_PM_OPS,
},
};
diff --git a/drivers/usb/host/ehci-grlib.c b/drivers/usb/host/ehci-grlib.c
index 495b6fbcbcd9..21650044b09e 100644
--- a/drivers/usb/host/ehci-grlib.c
+++ b/drivers/usb/host/ehci-grlib.c
@@ -187,7 +187,6 @@ static struct platform_driver ehci_grlib_driver = {
.shutdown = usb_hcd_platform_shutdown,
.driver = {
.name = "grlib-ehci",
- .owner = THIS_MODULE,
.of_match_table = ehci_hcd_grlib_of_match,
},
};
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 38bfeedae1d0..85e56d1abd23 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1110,7 +1110,7 @@ int ehci_suspend(struct usb_hcd *hcd, bool do_wakeup)
EXPORT_SYMBOL_GPL(ehci_suspend);
/* Returns 0 if power was preserved, 1 if power was lost */
-int ehci_resume(struct usb_hcd *hcd, bool hibernated)
+int ehci_resume(struct usb_hcd *hcd, bool force_reset)
{
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
@@ -1124,12 +1124,12 @@ int ehci_resume(struct usb_hcd *hcd, bool hibernated)
return 0; /* Controller is dead */
/*
- * If CF is still set and we aren't resuming from hibernation
+ * If CF is still set and reset isn't forced
* then we maintained suspend power.
* Just undo the effect of ehci_suspend().
*/
if (ehci_readl(ehci, &ehci->regs->configured_flag) == FLAG_CF &&
- !hibernated) {
+ !force_reset) {
int mask = INTR_MASK;
ehci_prepare_ports_for_controller_resume(ehci);
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 118edb7bdca2..87cf86f38b36 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -700,15 +700,15 @@ ehci_hub_descriptor (
memset(&desc->u.hs.DeviceRemovable[0], 0, temp);
memset(&desc->u.hs.DeviceRemovable[temp], 0xff, temp);
- temp = 0x0008; /* per-port overcurrent reporting */
+ temp = HUB_CHAR_INDV_PORT_OCPM; /* per-port overcurrent reporting */
if (HCS_PPC (ehci->hcs_params))
- temp |= 0x0001; /* per-port power control */
+ temp |= HUB_CHAR_INDV_PORT_LPSM; /* per-port power control */
else
- temp |= 0x0002; /* no power switching */
+ temp |= HUB_CHAR_NO_LPSM; /* no power switching */
#if 0
// re-enable when we support USB_PORT_FEAT_INDICATOR below.
if (HCS_INDICATOR (ehci->hcs_params))
- temp |= 0x0080; /* per-port indicators (LEDs) */
+ temp |= HUB_CHAR_PORTIND; /* per-port indicators (LEDs) */
#endif
desc->wHubCharacteristics = cpu_to_le16(temp);
}
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 851006a0d97b..2a5d2fd76040 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -43,6 +43,24 @@ static inline bool is_intel_quark_x1000(struct pci_dev *pdev)
}
/*
+ * This is the list of PCI IDs for the devices that have EHCI USB class and
+ * specific drivers for that. One of the example is a ChipIdea device installed
+ * on some Intel MID platforms.
+ */
+static const struct pci_device_id bypass_pci_id_table[] = {
+ /* ChipIdea on Intel MID platform */
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0811), },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0829), },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0xe006), },
+ {}
+};
+
+static inline bool is_bypassed_id(struct pci_dev *pdev)
+{
+ return !!pci_match_id(bypass_pci_id_table, pdev);
+}
+
+/*
* 0x84 is the offset of in/out threshold register,
* and it is the same offset as the register of 'hostpc'.
*/
@@ -352,6 +370,13 @@ static const struct ehci_driver_overrides pci_overrides __initconst = {
/*-------------------------------------------------------------------------*/
+static int ehci_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ if (is_bypassed_id(pdev))
+ return -ENODEV;
+ return usb_hcd_pci_probe(pdev, id);
+}
+
/* PCI driver selection metadata; PCI hotplugging uses this */
static const struct pci_device_id pci_ids [] = { {
/* handle any USB 2.0 EHCI controller */
@@ -370,7 +395,7 @@ static struct pci_driver ehci_pci_driver = {
.name = (char *) hcd_name,
.id_table = pci_ids,
- .probe = usb_hcd_pci_probe,
+ .probe = ehci_pci_probe,
.remove = usb_hcd_pci_remove,
.shutdown = usb_hcd_pci_shutdown,
diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c
index 8557803e6154..d8a75a51d6d4 100644
--- a/drivers/usb/host/ehci-platform.c
+++ b/drivers/usb/host/ehci-platform.c
@@ -43,7 +43,8 @@
struct ehci_platform_priv {
struct clk *clks[EHCI_MAX_CLKS];
struct reset_control *rst;
- struct phy *phy;
+ struct phy **phys;
+ int num_phys;
};
static const char hcd_name[] = "ehci-platform";
@@ -78,7 +79,7 @@ static int ehci_platform_power_on(struct platform_device *dev)
{
struct usb_hcd *hcd = platform_get_drvdata(dev);
struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd);
- int clk, ret;
+ int clk, ret, phy_num;
for (clk = 0; clk < EHCI_MAX_CLKS && priv->clks[clk]; clk++) {
ret = clk_prepare_enable(priv->clks[clk]);
@@ -86,20 +87,28 @@ static int ehci_platform_power_on(struct platform_device *dev)
goto err_disable_clks;
}
- if (priv->phy) {
- ret = phy_init(priv->phy);
- if (ret)
- goto err_disable_clks;
-
- ret = phy_power_on(priv->phy);
- if (ret)
- goto err_exit_phy;
+ for (phy_num = 0; phy_num < priv->num_phys; phy_num++) {
+ if (priv->phys[phy_num]) {
+ ret = phy_init(priv->phys[phy_num]);
+ if (ret)
+ goto err_exit_phy;
+ ret = phy_power_on(priv->phys[phy_num]);
+ if (ret) {
+ phy_exit(priv->phys[phy_num]);
+ goto err_exit_phy;
+ }
+ }
}
return 0;
err_exit_phy:
- phy_exit(priv->phy);
+ while (--phy_num >= 0) {
+ if (priv->phys[phy_num]) {
+ phy_power_off(priv->phys[phy_num]);
+ phy_exit(priv->phys[phy_num]);
+ }
+ }
err_disable_clks:
while (--clk >= 0)
clk_disable_unprepare(priv->clks[clk]);
@@ -111,11 +120,13 @@ static void ehci_platform_power_off(struct platform_device *dev)
{
struct usb_hcd *hcd = platform_get_drvdata(dev);
struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd);
- int clk;
+ int clk, phy_num;
- if (priv->phy) {
- phy_power_off(priv->phy);
- phy_exit(priv->phy);
+ for (phy_num = 0; phy_num < priv->num_phys; phy_num++) {
+ if (priv->phys[phy_num]) {
+ phy_power_off(priv->phys[phy_num]);
+ phy_exit(priv->phys[phy_num]);
+ }
}
for (clk = EHCI_MAX_CLKS - 1; clk >= 0; clk--)
@@ -143,7 +154,8 @@ static int ehci_platform_probe(struct platform_device *dev)
struct usb_ehci_pdata *pdata = dev_get_platdata(&dev->dev);
struct ehci_platform_priv *priv;
struct ehci_hcd *ehci;
- int err, irq, clk = 0;
+ const char *phy_name;
+ int err, irq, phy_num, clk = 0;
if (usb_disabled())
return -ENODEV;
@@ -155,7 +167,8 @@ static int ehci_platform_probe(struct platform_device *dev)
if (!pdata)
pdata = &ehci_platform_defaults;
- err = dma_coerce_mask_and_coherent(&dev->dev, DMA_BIT_MASK(32));
+ err = dma_coerce_mask_and_coherent(&dev->dev,
+ pdata->dma_mask_64 ? DMA_BIT_MASK(64) : DMA_BIT_MASK(32));
if (err)
return err;
@@ -185,12 +198,42 @@ static int ehci_platform_probe(struct platform_device *dev)
if (of_property_read_bool(dev->dev.of_node, "big-endian"))
ehci->big_endian_mmio = ehci->big_endian_desc = 1;
- priv->phy = devm_phy_get(&dev->dev, "usb");
- if (IS_ERR(priv->phy)) {
- err = PTR_ERR(priv->phy);
- if (err == -EPROBE_DEFER)
- goto err_put_hcd;
- priv->phy = NULL;
+ if (of_property_read_bool(dev->dev.of_node,
+ "needs-reset-on-resume"))
+ pdata->reset_on_resume = 1;
+
+ priv->num_phys = of_count_phandle_with_args(dev->dev.of_node,
+ "phys", "#phy-cells");
+ priv->num_phys = priv->num_phys > 0 ? priv->num_phys : 1;
+
+ priv->phys = devm_kcalloc(&dev->dev, priv->num_phys,
+ sizeof(struct phy *), GFP_KERNEL);
+ if (!priv->phys)
+ return -ENOMEM;
+
+ for (phy_num = 0; phy_num < priv->num_phys; phy_num++) {
+ err = of_property_read_string_index(
+ dev->dev.of_node,
+ "phy-names", phy_num,
+ &phy_name);
+
+ if (err < 0) {
+ if (priv->num_phys > 1) {
+ dev_err(&dev->dev, "phy-names not provided");
+ goto err_put_hcd;
+ } else
+ phy_name = "usb";
+ }
+
+ priv->phys[phy_num] = devm_phy_get(&dev->dev,
+ phy_name);
+ if (IS_ERR(priv->phys[phy_num])) {
+ err = PTR_ERR(priv->phys[phy_num]);
+ if ((priv->num_phys > 1) ||
+ (err == -EPROBE_DEFER))
+ goto err_put_hcd;
+ priv->phys[phy_num] = NULL;
+ }
}
for (clk = 0; clk < EHCI_MAX_CLKS; clk++) {
@@ -340,7 +383,7 @@ static int ehci_platform_resume(struct device *dev)
return err;
}
- ehci_resume(hcd, false);
+ ehci_resume(hcd, pdata->reset_on_resume);
return 0;
}
#endif /* CONFIG_PM_SLEEP */
@@ -349,6 +392,7 @@ static const struct of_device_id vt8500_ehci_ids[] = {
{ .compatible = "via,vt8500-ehci", },
{ .compatible = "wm,prizm-ehci", },
{ .compatible = "generic-ehci", },
+ { .compatible = "cavium,octeon-6335-ehci", },
{}
};
MODULE_DEVICE_TABLE(of, vt8500_ehci_ids);
diff --git a/drivers/usb/host/ehci-pmcmsp.c b/drivers/usb/host/ehci-pmcmsp.c
index 7d75465d97c7..342816a7f8b1 100644
--- a/drivers/usb/host/ehci-pmcmsp.c
+++ b/drivers/usb/host/ehci-pmcmsp.c
@@ -325,6 +325,5 @@ static struct platform_driver ehci_hcd_msp_driver = {
.remove = ehci_hcd_msp_drv_remove,
.driver = {
.name = "pmcmsp-ehci",
- .owner = THIS_MODULE,
},
};
diff --git a/drivers/usb/host/ehci-ppc-of.c b/drivers/usb/host/ehci-ppc-of.c
index 547924796d29..1a10c8d542ca 100644
--- a/drivers/usb/host/ehci-ppc-of.c
+++ b/drivers/usb/host/ehci-ppc-of.c
@@ -234,7 +234,6 @@ static struct platform_driver ehci_hcd_ppc_of_driver = {
.shutdown = usb_hcd_platform_shutdown,
.driver = {
.name = "ppc-of-ehci",
- .owner = THIS_MODULE,
.of_match_table = ehci_hcd_ppc_of_match,
},
};
diff --git a/drivers/usb/host/ehci-sead3.c b/drivers/usb/host/ehci-sead3.c
index 9b6e8d0eac43..3d86cc2ffe68 100644
--- a/drivers/usb/host/ehci-sead3.c
+++ b/drivers/usb/host/ehci-sead3.c
@@ -178,7 +178,6 @@ static struct platform_driver ehci_hcd_sead3_driver = {
.shutdown = usb_hcd_platform_shutdown,
.driver = {
.name = "sead3-ehci",
- .owner = THIS_MODULE,
.pm = SEAD3_EHCI_PMOPS,
}
};
diff --git a/drivers/usb/host/ehci-sh.c b/drivers/usb/host/ehci-sh.c
index 0e0ce684aff3..5caf88d679e4 100644
--- a/drivers/usb/host/ehci-sh.c
+++ b/drivers/usb/host/ehci-sh.c
@@ -189,7 +189,6 @@ static struct platform_driver ehci_hcd_sh_driver = {
.shutdown = ehci_hcd_sh_shutdown,
.driver = {
.name = "sh_ehci",
- .owner = THIS_MODULE,
},
};
diff --git a/drivers/usb/host/ehci-tilegx.c b/drivers/usb/host/ehci-tilegx.c
index 0d247673c3ca..bdb93b6a356f 100644
--- a/drivers/usb/host/ehci-tilegx.c
+++ b/drivers/usb/host/ehci-tilegx.c
@@ -210,7 +210,6 @@ static struct platform_driver ehci_hcd_tilegx_driver = {
.shutdown = ehci_hcd_tilegx_drv_shutdown,
.driver = {
.name = "tilegx-ehci",
- .owner = THIS_MODULE,
}
};
diff --git a/drivers/usb/host/ehci-xilinx-of.c b/drivers/usb/host/ehci-xilinx-of.c
index a2328361dc80..f54480850bb8 100644
--- a/drivers/usb/host/ehci-xilinx-of.c
+++ b/drivers/usb/host/ehci-xilinx-of.c
@@ -236,7 +236,6 @@ static struct platform_driver ehci_hcd_xilinx_of_driver = {
.shutdown = usb_hcd_platform_shutdown,
.driver = {
.name = "xilinx-of-ehci",
- .owner = THIS_MODULE,
.of_match_table = ehci_hcd_xilinx_of_match,
},
};
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index 6f0577b0a5ae..52ef0844a180 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -871,7 +871,7 @@ extern int ehci_handshake(struct ehci_hcd *ehci, void __iomem *ptr,
#ifdef CONFIG_PM
extern int ehci_suspend(struct usb_hcd *hcd, bool do_wakeup);
-extern int ehci_resume(struct usb_hcd *hcd, bool hibernated);
+extern int ehci_resume(struct usb_hcd *hcd, bool force_reset);
#endif /* CONFIG_PM */
extern int ehci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
diff --git a/drivers/usb/host/fhci-hub.c b/drivers/usb/host/fhci-hub.c
index 6af2512f8378..70116a65262c 100644
--- a/drivers/usb/host/fhci-hub.c
+++ b/drivers/usb/host/fhci-hub.c
@@ -32,8 +32,8 @@ static u8 root_hub_des[] = {
0x09, /* blength */
0x29, /* bDescriptorType;hub-descriptor */
0x01, /* bNbrPorts */
- 0x00, /* wHubCharacteristics */
- 0x00,
+ HUB_CHAR_INDV_PORT_LPSM | HUB_CHAR_NO_OCPM, /* wHubCharacteristics */
+ 0x00, /* per-port power, no overcurrent */
0x01, /* bPwrOn2pwrGood;2ms */
0x00, /* bHubContrCurrent;0mA */
0x00, /* DeviceRemoveable */
@@ -208,7 +208,6 @@ int fhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
{
struct fhci_hcd *fhci = hcd_to_fhci(hcd);
int retval = 0;
- int len = 0;
struct usb_hub_status *hub_status;
struct usb_port_status *port_status;
unsigned long flags;
@@ -272,8 +271,6 @@ int fhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
break;
case GetHubDescriptor:
memcpy(buf, root_hub_des, sizeof(root_hub_des));
- buf[3] = 0x11; /* per-port power, no ovrcrnt */
- len = (buf[0] < wLength) ? buf[0] : wLength;
break;
case GetHubStatus:
hub_status = (struct usb_hub_status *)buf;
@@ -281,7 +278,6 @@ int fhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
cpu_to_le16(fhci->vroot_hub->hub.wHubStatus);
hub_status->wHubChange =
cpu_to_le16(fhci->vroot_hub->hub.wHubChange);
- len = 4;
break;
case GetPortStatus:
port_status = (struct usb_port_status *)buf;
@@ -289,7 +285,6 @@ int fhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
cpu_to_le16(fhci->vroot_hub->port.wPortStatus);
port_status->wPortChange =
cpu_to_le16(fhci->vroot_hub->port.wPortChange);
- len = 4;
break;
case SetHubFeature:
switch (wValue) {
diff --git a/drivers/usb/host/fotg210-hcd.c b/drivers/usb/host/fotg210-hcd.c
index ecf02b2623e8..475b21fd373b 100644
--- a/drivers/usb/host/fotg210-hcd.c
+++ b/drivers/usb/host/fotg210-hcd.c
@@ -1521,8 +1521,8 @@ fotg210_hub_descriptor(
memset(&desc->u.hs.DeviceRemovable[0], 0, temp);
memset(&desc->u.hs.DeviceRemovable[temp], 0xff, temp);
- temp = 0x0008; /* per-port overcurrent reporting */
- temp |= 0x0002; /* no power switching */
+ temp = HUB_CHAR_INDV_PORT_OCPM; /* per-port overcurrent reporting */
+ temp |= HUB_CHAR_NO_LPSM; /* no power switching */
desc->wHubCharacteristics = cpu_to_le16(temp);
}
diff --git a/drivers/usb/host/fusbh200-hcd.c b/drivers/usb/host/fusbh200-hcd.c
index 664d2aa1239c..a83eefefffda 100644
--- a/drivers/usb/host/fusbh200-hcd.c
+++ b/drivers/usb/host/fusbh200-hcd.c
@@ -1479,8 +1479,8 @@ fusbh200_hub_descriptor (
memset(&desc->u.hs.DeviceRemovable[0], 0, temp);
memset(&desc->u.hs.DeviceRemovable[temp], 0xff, temp);
- temp = 0x0008; /* per-port overcurrent reporting */
- temp |= 0x0002; /* no power switching */
+ temp = HUB_CHAR_INDV_PORT_OCPM; /* per-port overcurrent reporting */
+ temp |= HUB_CHAR_NO_LPSM; /* no power switching */
desc->wHubCharacteristics = cpu_to_le16(temp);
}
diff --git a/drivers/usb/host/imx21-hcd.c b/drivers/usb/host/imx21-hcd.c
index eb4efba9f1ad..6a2ad550b120 100644
--- a/drivers/usb/host/imx21-hcd.c
+++ b/drivers/usb/host/imx21-hcd.c
@@ -1482,9 +1482,8 @@ static int get_hub_descriptor(struct usb_hcd *hcd,
desc->bDescLength = 9;
desc->bPwrOn2PwrGood = 0;
desc->wHubCharacteristics = (__force __u16) cpu_to_le16(
- 0x0002 | /* No power switching */
- 0x0010 | /* No over current protection */
- 0);
+ HUB_CHAR_NO_LPSM | /* No power switching */
+ HUB_CHAR_NO_OCPM); /* No over current protection */
desc->u.hs.DeviceRemovable[0] = 1 << 1;
desc->u.hs.DeviceRemovable[1] = ~0;
diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c
index 31c9c4d0fa0b..113d0cc6cc43 100644
--- a/drivers/usb/host/isp116x-hcd.c
+++ b/drivers/usb/host/isp116x-hcd.c
@@ -948,7 +948,10 @@ static void isp116x_hub_descriptor(struct isp116x *isp116x,
desc->bHubContrCurrent = 0;
desc->bNbrPorts = (u8) (reg & 0x3);
/* Power switching, device type, overcurrent. */
- desc->wHubCharacteristics = cpu_to_le16((u16) ((reg >> 8) & 0x1f));
+ desc->wHubCharacteristics = cpu_to_le16((u16) ((reg >> 8) &
+ (HUB_CHAR_LPSM |
+ HUB_CHAR_COMPOUND |
+ HUB_CHAR_OCPM)));
desc->bPwrOn2PwrGood = (u8) ((reg >> 24) & 0xff);
/* ports removable, and legacy PortPwrCtrlMask */
desc->u.hs.DeviceRemovable[0] = 0;
diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c
index 75e5876f9d7c..b32ab60cad1e 100644
--- a/drivers/usb/host/isp1362-hcd.c
+++ b/drivers/usb/host/isp1362-hcd.c
@@ -1543,8 +1543,12 @@ static void isp1362_hub_descriptor(struct isp1362_hcd *isp1362_hcd,
desc->bHubContrCurrent = 0;
desc->bNbrPorts = reg & 0x3;
/* Power switching, device type, overcurrent. */
- desc->wHubCharacteristics = cpu_to_le16((reg >> 8) & 0x1f);
- DBG(0, "%s: hubcharacteristics = %02x\n", __func__, cpu_to_le16((reg >> 8) & 0x1f));
+ desc->wHubCharacteristics = cpu_to_le16((reg >> 8) &
+ (HUB_CHAR_LPSM |
+ HUB_CHAR_COMPOUND |
+ HUB_CHAR_OCPM));
+ DBG(0, "%s: hubcharacteristics = %02x\n", __func__,
+ desc->wHubCharacteristics);
desc->bPwrOn2PwrGood = (reg >> 24) & 0xff;
/* ports removable, and legacy PortPwrCtrlMask */
desc->u.hs.DeviceRemovable[0] = desc->bNbrPorts == 1 ? 1 << 1 : 3 << 1;
diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c
deleted file mode 100644
index 395649f357aa..000000000000
--- a/drivers/usb/host/isp1760-hcd.c
+++ /dev/null
@@ -1,2268 +0,0 @@
-/*
- * Driver for the NXP ISP1760 chip
- *
- * However, the code might contain some bugs. What doesn't work for sure is:
- * - ISO
- * - OTG
- e The interrupt line is configured as active low, level.
- *
- * (c) 2007 Sebastian Siewior <bigeasy@linutronix.de>
- *
- * (c) 2011 Arvid Brodin <arvid.brodin@enea.com>
- *
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/list.h>
-#include <linux/usb.h>
-#include <linux/usb/hcd.h>
-#include <linux/debugfs.h>
-#include <linux/uaccess.h>
-#include <linux/io.h>
-#include <linux/mm.h>
-#include <linux/timer.h>
-#include <asm/unaligned.h>
-#include <asm/cacheflush.h>
-#include <linux/gpio.h>
-
-#include "isp1760-hcd.h"
-
-static struct kmem_cache *qtd_cachep;
-static struct kmem_cache *qh_cachep;
-static struct kmem_cache *urb_listitem_cachep;
-
-enum queue_head_types {
- QH_CONTROL,
- QH_BULK,
- QH_INTERRUPT,
- QH_END
-};
-
-struct isp1760_hcd {
- u32 hcs_params;
- spinlock_t lock;
- struct slotinfo atl_slots[32];
- int atl_done_map;
- struct slotinfo int_slots[32];
- int int_done_map;
- struct memory_chunk memory_pool[BLOCKS];
- struct list_head qh_list[QH_END];
-
- /* periodic schedule support */
-#define DEFAULT_I_TDPS 1024
- unsigned periodic_size;
- unsigned i_thresh;
- unsigned long reset_done;
- unsigned long next_statechange;
- unsigned int devflags;
-
- int rst_gpio;
-};
-
-static inline struct isp1760_hcd *hcd_to_priv(struct usb_hcd *hcd)
-{
- return (struct isp1760_hcd *) (hcd->hcd_priv);
-}
-
-/* Section 2.2 Host Controller Capability Registers */
-#define HC_LENGTH(p) (((p)>>00)&0x00ff) /* bits 7:0 */
-#define HC_VERSION(p) (((p)>>16)&0xffff) /* bits 31:16 */
-#define HCS_INDICATOR(p) ((p)&(1 << 16)) /* true: has port indicators */
-#define HCS_PPC(p) ((p)&(1 << 4)) /* true: port power control */
-#define HCS_N_PORTS(p) (((p)>>0)&0xf) /* bits 3:0, ports on HC */
-#define HCC_ISOC_CACHE(p) ((p)&(1 << 7)) /* true: can cache isoc frame */
-#define HCC_ISOC_THRES(p) (((p)>>4)&0x7) /* bits 6:4, uframes cached */
-
-/* Section 2.3 Host Controller Operational Registers */
-#define CMD_LRESET (1<<7) /* partial reset (no ports, etc) */
-#define CMD_RESET (1<<1) /* reset HC not bus */
-#define CMD_RUN (1<<0) /* start/stop HC */
-#define STS_PCD (1<<2) /* port change detect */
-#define FLAG_CF (1<<0) /* true: we'll support "high speed" */
-
-#define PORT_OWNER (1<<13) /* true: companion hc owns this port */
-#define PORT_POWER (1<<12) /* true: has power (see PPC) */
-#define PORT_USB11(x) (((x) & (3 << 10)) == (1 << 10)) /* USB 1.1 device */
-#define PORT_RESET (1<<8) /* reset port */
-#define PORT_SUSPEND (1<<7) /* suspend port */
-#define PORT_RESUME (1<<6) /* resume it */
-#define PORT_PE (1<<2) /* port enable */
-#define PORT_CSC (1<<1) /* connect status change */
-#define PORT_CONNECT (1<<0) /* device connected */
-#define PORT_RWC_BITS (PORT_CSC)
-
-struct isp1760_qtd {
- u8 packet_type;
- void *data_buffer;
- u32 payload_addr;
-
- /* the rest is HCD-private */
- struct list_head qtd_list;
- struct urb *urb;
- size_t length;
- size_t actual_length;
-
- /* QTD_ENQUEUED: waiting for transfer (inactive) */
- /* QTD_PAYLOAD_ALLOC: chip mem has been allocated for payload */
- /* QTD_XFER_STARTED: valid ptd has been written to isp176x - only
- interrupt handler may touch this qtd! */
- /* QTD_XFER_COMPLETE: payload has been transferred successfully */
- /* QTD_RETIRE: transfer error/abort qtd */
-#define QTD_ENQUEUED 0
-#define QTD_PAYLOAD_ALLOC 1
-#define QTD_XFER_STARTED 2
-#define QTD_XFER_COMPLETE 3
-#define QTD_RETIRE 4
- u32 status;
-};
-
-/* Queue head, one for each active endpoint */
-struct isp1760_qh {
- struct list_head qh_list;
- struct list_head qtd_list;
- u32 toggle;
- u32 ping;
- int slot;
- int tt_buffer_dirty; /* See USB2.0 spec section 11.17.5 */
-};
-
-struct urb_listitem {
- struct list_head urb_list;
- struct urb *urb;
-};
-
-/*
- * Access functions for isp176x registers (addresses 0..0x03FF).
- */
-static u32 reg_read32(void __iomem *base, u32 reg)
-{
- return readl(base + reg);
-}
-
-static void reg_write32(void __iomem *base, u32 reg, u32 val)
-{
- writel(val, base + reg);
-}
-
-/*
- * Access functions for isp176x memory (offset >= 0x0400).
- *
- * bank_reads8() reads memory locations prefetched by an earlier write to
- * HC_MEMORY_REG (see isp176x datasheet). Unless you want to do fancy multi-
- * bank optimizations, you should use the more generic mem_reads8() below.
- *
- * For access to ptd memory, use the specialized ptd_read() and ptd_write()
- * below.
- *
- * These functions copy via MMIO data to/from the device. memcpy_{to|from}io()
- * doesn't quite work because some people have to enforce 32-bit access
- */
-static void bank_reads8(void __iomem *src_base, u32 src_offset, u32 bank_addr,
- __u32 *dst, u32 bytes)
-{
- __u32 __iomem *src;
- u32 val;
- __u8 *src_byteptr;
- __u8 *dst_byteptr;
-
- src = src_base + (bank_addr | src_offset);
-
- if (src_offset < PAYLOAD_OFFSET) {
- while (bytes >= 4) {
- *dst = le32_to_cpu(__raw_readl(src));
- bytes -= 4;
- src++;
- dst++;
- }
- } else {
- while (bytes >= 4) {
- *dst = __raw_readl(src);
- bytes -= 4;
- src++;
- dst++;
- }
- }
-
- if (!bytes)
- return;
-
- /* in case we have 3, 2 or 1 by left. The dst buffer may not be fully
- * allocated.
- */
- if (src_offset < PAYLOAD_OFFSET)
- val = le32_to_cpu(__raw_readl(src));
- else
- val = __raw_readl(src);
-
- dst_byteptr = (void *) dst;
- src_byteptr = (void *) &val;
- while (bytes > 0) {
- *dst_byteptr = *src_byteptr;
- dst_byteptr++;
- src_byteptr++;
- bytes--;
- }
-}
-
-static void mem_reads8(void __iomem *src_base, u32 src_offset, void *dst,
- u32 bytes)
-{
- reg_write32(src_base, HC_MEMORY_REG, src_offset + ISP_BANK(0));
- ndelay(90);
- bank_reads8(src_base, src_offset, ISP_BANK(0), dst, bytes);
-}
-
-static void mem_writes8(void __iomem *dst_base, u32 dst_offset,
- __u32 const *src, u32 bytes)
-{
- __u32 __iomem *dst;
-
- dst = dst_base + dst_offset;
-
- if (dst_offset < PAYLOAD_OFFSET) {
- while (bytes >= 4) {
- __raw_writel(cpu_to_le32(*src), dst);
- bytes -= 4;
- src++;
- dst++;
- }
- } else {
- while (bytes >= 4) {
- __raw_writel(*src, dst);
- bytes -= 4;
- src++;
- dst++;
- }
- }
-
- if (!bytes)
- return;
- /* in case we have 3, 2 or 1 bytes left. The buffer is allocated and the
- * extra bytes should not be read by the HW.
- */
-
- if (dst_offset < PAYLOAD_OFFSET)
- __raw_writel(cpu_to_le32(*src), dst);
- else
- __raw_writel(*src, dst);
-}
-
-/*
- * Read and write ptds. 'ptd_offset' should be one of ISO_PTD_OFFSET,
- * INT_PTD_OFFSET, and ATL_PTD_OFFSET. 'slot' should be less than 32.
- */
-static void ptd_read(void __iomem *base, u32 ptd_offset, u32 slot,
- struct ptd *ptd)
-{
- reg_write32(base, HC_MEMORY_REG,
- ISP_BANK(0) + ptd_offset + slot*sizeof(*ptd));
- ndelay(90);
- bank_reads8(base, ptd_offset + slot*sizeof(*ptd), ISP_BANK(0),
- (void *) ptd, sizeof(*ptd));
-}
-
-static void ptd_write(void __iomem *base, u32 ptd_offset, u32 slot,
- struct ptd *ptd)
-{
- mem_writes8(base, ptd_offset + slot*sizeof(*ptd) + sizeof(ptd->dw0),
- &ptd->dw1, 7*sizeof(ptd->dw1));
- /* Make sure dw0 gets written last (after other dw's and after payload)
- since it contains the enable bit */
- wmb();
- mem_writes8(base, ptd_offset + slot*sizeof(*ptd), &ptd->dw0,
- sizeof(ptd->dw0));
-}
-
-
-/* memory management of the 60kb on the chip from 0x1000 to 0xffff */
-static void init_memory(struct isp1760_hcd *priv)
-{
- int i, curr;
- u32 payload_addr;
-
- payload_addr = PAYLOAD_OFFSET;
- for (i = 0; i < BLOCK_1_NUM; i++) {
- priv->memory_pool[i].start = payload_addr;
- priv->memory_pool[i].size = BLOCK_1_SIZE;
- priv->memory_pool[i].free = 1;
- payload_addr += priv->memory_pool[i].size;
- }
-
- curr = i;
- for (i = 0; i < BLOCK_2_NUM; i++) {
- priv->memory_pool[curr + i].start = payload_addr;
- priv->memory_pool[curr + i].size = BLOCK_2_SIZE;
- priv->memory_pool[curr + i].free = 1;
- payload_addr += priv->memory_pool[curr + i].size;
- }
-
- curr = i;
- for (i = 0; i < BLOCK_3_NUM; i++) {
- priv->memory_pool[curr + i].start = payload_addr;
- priv->memory_pool[curr + i].size = BLOCK_3_SIZE;
- priv->memory_pool[curr + i].free = 1;
- payload_addr += priv->memory_pool[curr + i].size;
- }
-
- WARN_ON(payload_addr - priv->memory_pool[0].start > PAYLOAD_AREA_SIZE);
-}
-
-static void alloc_mem(struct usb_hcd *hcd, struct isp1760_qtd *qtd)
-{
- struct isp1760_hcd *priv = hcd_to_priv(hcd);
- int i;
-
- WARN_ON(qtd->payload_addr);
-
- if (!qtd->length)
- return;
-
- for (i = 0; i < BLOCKS; i++) {
- if (priv->memory_pool[i].size >= qtd->length &&
- priv->memory_pool[i].free) {
- priv->memory_pool[i].free = 0;
- qtd->payload_addr = priv->memory_pool[i].start;
- return;
- }
- }
-}
-
-static void free_mem(struct usb_hcd *hcd, struct isp1760_qtd *qtd)
-{
- struct isp1760_hcd *priv = hcd_to_priv(hcd);
- int i;
-
- if (!qtd->payload_addr)
- return;
-
- for (i = 0; i < BLOCKS; i++) {
- if (priv->memory_pool[i].start == qtd->payload_addr) {
- WARN_ON(priv->memory_pool[i].free);
- priv->memory_pool[i].free = 1;
- qtd->payload_addr = 0;
- return;
- }
- }
-
- dev_err(hcd->self.controller, "%s: Invalid pointer: %08x\n",
- __func__, qtd->payload_addr);
- WARN_ON(1);
- qtd->payload_addr = 0;
-}
-
-static int handshake(struct usb_hcd *hcd, u32 reg,
- u32 mask, u32 done, int usec)
-{
- u32 result;
-
- do {
- result = reg_read32(hcd->regs, reg);
- if (result == ~0)
- return -ENODEV;
- result &= mask;
- if (result == done)
- return 0;
- udelay(1);
- usec--;
- } while (usec > 0);
- return -ETIMEDOUT;
-}
-
-/* reset a non-running (STS_HALT == 1) controller */
-static int ehci_reset(struct usb_hcd *hcd)
-{
- int retval;
- struct isp1760_hcd *priv = hcd_to_priv(hcd);
-
- u32 command = reg_read32(hcd->regs, HC_USBCMD);
-
- command |= CMD_RESET;
- reg_write32(hcd->regs, HC_USBCMD, command);
- hcd->state = HC_STATE_HALT;
- priv->next_statechange = jiffies;
- retval = handshake(hcd, HC_USBCMD,
- CMD_RESET, 0, 250 * 1000);
- return retval;
-}
-
-static struct isp1760_qh *qh_alloc(gfp_t flags)
-{
- struct isp1760_qh *qh;
-
- qh = kmem_cache_zalloc(qh_cachep, flags);
- if (!qh)
- return NULL;
-
- INIT_LIST_HEAD(&qh->qh_list);
- INIT_LIST_HEAD(&qh->qtd_list);
- qh->slot = -1;
-
- return qh;
-}
-
-static void qh_free(struct isp1760_qh *qh)
-{
- WARN_ON(!list_empty(&qh->qtd_list));
- WARN_ON(qh->slot > -1);
- kmem_cache_free(qh_cachep, qh);
-}
-
-/* one-time init, only for memory state */
-static int priv_init(struct usb_hcd *hcd)
-{
- struct isp1760_hcd *priv = hcd_to_priv(hcd);
- u32 hcc_params;
- int i;
-
- spin_lock_init(&priv->lock);
-
- for (i = 0; i < QH_END; i++)
- INIT_LIST_HEAD(&priv->qh_list[i]);
-
- /*
- * hw default: 1K periodic list heads, one per frame.
- * periodic_size can shrink by USBCMD update if hcc_params allows.
- */
- priv->periodic_size = DEFAULT_I_TDPS;
-
- /* controllers may cache some of the periodic schedule ... */
- hcc_params = reg_read32(hcd->regs, HC_HCCPARAMS);
- /* full frame cache */
- if (HCC_ISOC_CACHE(hcc_params))
- priv->i_thresh = 8;
- else /* N microframes cached */
- priv->i_thresh = 2 + HCC_ISOC_THRES(hcc_params);
-
- return 0;
-}
-
-static int isp1760_hc_setup(struct usb_hcd *hcd)
-{
- struct isp1760_hcd *priv = hcd_to_priv(hcd);
- int result;
- u32 scratch, hwmode;
-
- /* low-level chip reset */
- if (gpio_is_valid(priv->rst_gpio)) {
- unsigned int rst_lvl;
-
- rst_lvl = (priv->devflags &
- ISP1760_FLAG_RESET_ACTIVE_HIGH) ? 1 : 0;
-
- gpio_set_value(priv->rst_gpio, rst_lvl);
- mdelay(50);
- gpio_set_value(priv->rst_gpio, !rst_lvl);
- }
-
- /* Setup HW Mode Control: This assumes a level active-low interrupt */
- hwmode = HW_DATA_BUS_32BIT;
-
- if (priv->devflags & ISP1760_FLAG_BUS_WIDTH_16)
- hwmode &= ~HW_DATA_BUS_32BIT;
- if (priv->devflags & ISP1760_FLAG_ANALOG_OC)
- hwmode |= HW_ANA_DIGI_OC;
- if (priv->devflags & ISP1760_FLAG_DACK_POL_HIGH)
- hwmode |= HW_DACK_POL_HIGH;
- if (priv->devflags & ISP1760_FLAG_DREQ_POL_HIGH)
- hwmode |= HW_DREQ_POL_HIGH;
- if (priv->devflags & ISP1760_FLAG_INTR_POL_HIGH)
- hwmode |= HW_INTR_HIGH_ACT;
- if (priv->devflags & ISP1760_FLAG_INTR_EDGE_TRIG)
- hwmode |= HW_INTR_EDGE_TRIG;
-
- /*
- * We have to set this first in case we're in 16-bit mode.
- * Write it twice to ensure correct upper bits if switching
- * to 16-bit mode.
- */
- reg_write32(hcd->regs, HC_HW_MODE_CTRL, hwmode);
- reg_write32(hcd->regs, HC_HW_MODE_CTRL, hwmode);
-
- reg_write32(hcd->regs, HC_SCRATCH_REG, 0xdeadbabe);
- /* Change bus pattern */
- scratch = reg_read32(hcd->regs, HC_CHIP_ID_REG);
- scratch = reg_read32(hcd->regs, HC_SCRATCH_REG);
- if (scratch != 0xdeadbabe) {
- dev_err(hcd->self.controller, "Scratch test failed.\n");
- return -ENODEV;
- }
-
- /* pre reset */
- reg_write32(hcd->regs, HC_BUFFER_STATUS_REG, 0);
- reg_write32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG, NO_TRANSFER_ACTIVE);
- reg_write32(hcd->regs, HC_INT_PTD_SKIPMAP_REG, NO_TRANSFER_ACTIVE);
- reg_write32(hcd->regs, HC_ISO_PTD_SKIPMAP_REG, NO_TRANSFER_ACTIVE);
-
- /* reset */
- reg_write32(hcd->regs, HC_RESET_REG, SW_RESET_RESET_ALL);
- mdelay(100);
-
- reg_write32(hcd->regs, HC_RESET_REG, SW_RESET_RESET_HC);
- mdelay(100);
-
- result = ehci_reset(hcd);
- if (result)
- return result;
-
- /* Step 11 passed */
-
- dev_info(hcd->self.controller, "bus width: %d, oc: %s\n",
- (priv->devflags & ISP1760_FLAG_BUS_WIDTH_16) ?
- 16 : 32, (priv->devflags & ISP1760_FLAG_ANALOG_OC) ?
- "analog" : "digital");
-
- /* ATL reset */
- reg_write32(hcd->regs, HC_HW_MODE_CTRL, hwmode | ALL_ATX_RESET);
- mdelay(10);
- reg_write32(hcd->regs, HC_HW_MODE_CTRL, hwmode);
-
- reg_write32(hcd->regs, HC_INTERRUPT_ENABLE, INTERRUPT_ENABLE_MASK);
-
- /*
- * PORT 1 Control register of the ISP1760 is the OTG control
- * register on ISP1761. Since there is no OTG or device controller
- * support in this driver, we use port 1 as a "normal" USB host port on
- * both chips.
- */
- reg_write32(hcd->regs, HC_PORT1_CTRL, PORT1_POWER | PORT1_INIT2);
- mdelay(10);
-
- priv->hcs_params = reg_read32(hcd->regs, HC_HCSPARAMS);
-
- return priv_init(hcd);
-}
-
-static u32 base_to_chip(u32 base)
-{
- return ((base - 0x400) >> 3);
-}
-
-static int last_qtd_of_urb(struct isp1760_qtd *qtd, struct isp1760_qh *qh)
-{
- struct urb *urb;
-
- if (list_is_last(&qtd->qtd_list, &qh->qtd_list))
- return 1;
-
- urb = qtd->urb;
- qtd = list_entry(qtd->qtd_list.next, typeof(*qtd), qtd_list);
- return (qtd->urb != urb);
-}
-
-/* magic numbers that can affect system performance */
-#define EHCI_TUNE_CERR 3 /* 0-3 qtd retries; 0 == don't stop */
-#define EHCI_TUNE_RL_HS 4 /* nak throttle; see 4.9 */
-#define EHCI_TUNE_RL_TT 0
-#define EHCI_TUNE_MULT_HS 1 /* 1-3 transactions/uframe; 4.10.3 */
-#define EHCI_TUNE_MULT_TT 1
-#define EHCI_TUNE_FLS 2 /* (small) 256 frame schedule */
-
-static void create_ptd_atl(struct isp1760_qh *qh,
- struct isp1760_qtd *qtd, struct ptd *ptd)
-{
- u32 maxpacket;
- u32 multi;
- u32 rl = RL_COUNTER;
- u32 nak = NAK_COUNTER;
-
- memset(ptd, 0, sizeof(*ptd));
-
- /* according to 3.6.2, max packet len can not be > 0x400 */
- maxpacket = usb_maxpacket(qtd->urb->dev, qtd->urb->pipe,
- usb_pipeout(qtd->urb->pipe));
- multi = 1 + ((maxpacket >> 11) & 0x3);
- maxpacket &= 0x7ff;
-
- /* DW0 */
- ptd->dw0 = DW0_VALID_BIT;
- ptd->dw0 |= TO_DW0_LENGTH(qtd->length);
- ptd->dw0 |= TO_DW0_MAXPACKET(maxpacket);
- ptd->dw0 |= TO_DW0_ENDPOINT(usb_pipeendpoint(qtd->urb->pipe));
-
- /* DW1 */
- ptd->dw1 = usb_pipeendpoint(qtd->urb->pipe) >> 1;
- ptd->dw1 |= TO_DW1_DEVICE_ADDR(usb_pipedevice(qtd->urb->pipe));
- ptd->dw1 |= TO_DW1_PID_TOKEN(qtd->packet_type);
-
- if (usb_pipebulk(qtd->urb->pipe))
- ptd->dw1 |= DW1_TRANS_BULK;
- else if (usb_pipeint(qtd->urb->pipe))
- ptd->dw1 |= DW1_TRANS_INT;
-
- if (qtd->urb->dev->speed != USB_SPEED_HIGH) {
- /* split transaction */
-
- ptd->dw1 |= DW1_TRANS_SPLIT;
- if (qtd->urb->dev->speed == USB_SPEED_LOW)
- ptd->dw1 |= DW1_SE_USB_LOSPEED;
-
- ptd->dw1 |= TO_DW1_PORT_NUM(qtd->urb->dev->ttport);
- ptd->dw1 |= TO_DW1_HUB_NUM(qtd->urb->dev->tt->hub->devnum);
-
- /* SE bit for Split INT transfers */
- if (usb_pipeint(qtd->urb->pipe) &&
- (qtd->urb->dev->speed == USB_SPEED_LOW))
- ptd->dw1 |= 2 << 16;
-
- rl = 0;
- nak = 0;
- } else {
- ptd->dw0 |= TO_DW0_MULTI(multi);
- if (usb_pipecontrol(qtd->urb->pipe) ||
- usb_pipebulk(qtd->urb->pipe))
- ptd->dw3 |= TO_DW3_PING(qh->ping);
- }
- /* DW2 */
- ptd->dw2 = 0;
- ptd->dw2 |= TO_DW2_DATA_START_ADDR(base_to_chip(qtd->payload_addr));
- ptd->dw2 |= TO_DW2_RL(rl);
-
- /* DW3 */
- ptd->dw3 |= TO_DW3_NAKCOUNT(nak);
- ptd->dw3 |= TO_DW3_DATA_TOGGLE(qh->toggle);
- if (usb_pipecontrol(qtd->urb->pipe)) {
- if (qtd->data_buffer == qtd->urb->setup_packet)
- ptd->dw3 &= ~TO_DW3_DATA_TOGGLE(1);
- else if (last_qtd_of_urb(qtd, qh))
- ptd->dw3 |= TO_DW3_DATA_TOGGLE(1);
- }
-
- ptd->dw3 |= DW3_ACTIVE_BIT;
- /* Cerr */
- ptd->dw3 |= TO_DW3_CERR(ERR_COUNTER);
-}
-
-static void transform_add_int(struct isp1760_qh *qh,
- struct isp1760_qtd *qtd, struct ptd *ptd)
-{
- u32 usof;
- u32 period;
-
- /*
- * Most of this is guessing. ISP1761 datasheet is quite unclear, and
- * the algorithm from the original Philips driver code, which was
- * pretty much used in this driver before as well, is quite horrendous
- * and, i believe, incorrect. The code below follows the datasheet and
- * USB2.0 spec as far as I can tell, and plug/unplug seems to be much
- * more reliable this way (fingers crossed...).
- */
-
- if (qtd->urb->dev->speed == USB_SPEED_HIGH) {
- /* urb->interval is in units of microframes (1/8 ms) */
- period = qtd->urb->interval >> 3;
-
- if (qtd->urb->interval > 4)
- usof = 0x01; /* One bit set =>
- interval 1 ms * uFrame-match */
- else if (qtd->urb->interval > 2)
- usof = 0x22; /* Two bits set => interval 1/2 ms */
- else if (qtd->urb->interval > 1)
- usof = 0x55; /* Four bits set => interval 1/4 ms */
- else
- usof = 0xff; /* All bits set => interval 1/8 ms */
- } else {
- /* urb->interval is in units of frames (1 ms) */
- period = qtd->urb->interval;
- usof = 0x0f; /* Execute Start Split on any of the
- four first uFrames */
-
- /*
- * First 8 bits in dw5 is uSCS and "specifies which uSOF the
- * complete split needs to be sent. Valid only for IN." Also,
- * "All bits can be set to one for every transfer." (p 82,
- * ISP1761 data sheet.) 0x1c is from Philips driver. Where did
- * that number come from? 0xff seems to work fine...
- */
- /* ptd->dw5 = 0x1c; */
- ptd->dw5 = 0xff; /* Execute Complete Split on any uFrame */
- }
-
- period = period >> 1;/* Ensure equal or shorter period than requested */
- period &= 0xf8; /* Mask off too large values and lowest unused 3 bits */
-
- ptd->dw2 |= period;
- ptd->dw4 = usof;
-}
-
-static void create_ptd_int(struct isp1760_qh *qh,
- struct isp1760_qtd *qtd, struct ptd *ptd)
-{
- create_ptd_atl(qh, qtd, ptd);
- transform_add_int(qh, qtd, ptd);
-}
-
-static void isp1760_urb_done(struct usb_hcd *hcd, struct urb *urb)
-__releases(priv->lock)
-__acquires(priv->lock)
-{
- struct isp1760_hcd *priv = hcd_to_priv(hcd);
-
- if (!urb->unlinked) {
- if (urb->status == -EINPROGRESS)
- urb->status = 0;
- }
-
- if (usb_pipein(urb->pipe) && usb_pipetype(urb->pipe) != PIPE_CONTROL) {
- void *ptr;
- for (ptr = urb->transfer_buffer;
- ptr < urb->transfer_buffer + urb->transfer_buffer_length;
- ptr += PAGE_SIZE)
- flush_dcache_page(virt_to_page(ptr));
- }
-
- /* complete() can reenter this HCD */
- usb_hcd_unlink_urb_from_ep(hcd, urb);
- spin_unlock(&priv->lock);
- usb_hcd_giveback_urb(hcd, urb, urb->status);
- spin_lock(&priv->lock);
-}
-
-static struct isp1760_qtd *qtd_alloc(gfp_t flags, struct urb *urb,
- u8 packet_type)
-{
- struct isp1760_qtd *qtd;
-
- qtd = kmem_cache_zalloc(qtd_cachep, flags);
- if (!qtd)
- return NULL;
-
- INIT_LIST_HEAD(&qtd->qtd_list);
- qtd->urb = urb;
- qtd->packet_type = packet_type;
- qtd->status = QTD_ENQUEUED;
- qtd->actual_length = 0;
-
- return qtd;
-}
-
-static void qtd_free(struct isp1760_qtd *qtd)
-{
- WARN_ON(qtd->payload_addr);
- kmem_cache_free(qtd_cachep, qtd);
-}
-
-static void start_bus_transfer(struct usb_hcd *hcd, u32 ptd_offset, int slot,
- struct slotinfo *slots, struct isp1760_qtd *qtd,
- struct isp1760_qh *qh, struct ptd *ptd)
-{
- struct isp1760_hcd *priv = hcd_to_priv(hcd);
- int skip_map;
-
- WARN_ON((slot < 0) || (slot > 31));
- WARN_ON(qtd->length && !qtd->payload_addr);
- WARN_ON(slots[slot].qtd);
- WARN_ON(slots[slot].qh);
- WARN_ON(qtd->status != QTD_PAYLOAD_ALLOC);
-
- /* Make sure done map has not triggered from some unlinked transfer */
- if (ptd_offset == ATL_PTD_OFFSET) {
- priv->atl_done_map |= reg_read32(hcd->regs,
- HC_ATL_PTD_DONEMAP_REG);
- priv->atl_done_map &= ~(1 << slot);
- } else {
- priv->int_done_map |= reg_read32(hcd->regs,
- HC_INT_PTD_DONEMAP_REG);
- priv->int_done_map &= ~(1 << slot);
- }
-
- qh->slot = slot;
- qtd->status = QTD_XFER_STARTED;
- slots[slot].timestamp = jiffies;
- slots[slot].qtd = qtd;
- slots[slot].qh = qh;
- ptd_write(hcd->regs, ptd_offset, slot, ptd);
-
- if (ptd_offset == ATL_PTD_OFFSET) {
- skip_map = reg_read32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG);
- skip_map &= ~(1 << qh->slot);
- reg_write32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG, skip_map);
- } else {
- skip_map = reg_read32(hcd->regs, HC_INT_PTD_SKIPMAP_REG);
- skip_map &= ~(1 << qh->slot);
- reg_write32(hcd->regs, HC_INT_PTD_SKIPMAP_REG, skip_map);
- }
-}
-
-static int is_short_bulk(struct isp1760_qtd *qtd)
-{
- return (usb_pipebulk(qtd->urb->pipe) &&
- (qtd->actual_length < qtd->length));
-}
-
-static void collect_qtds(struct usb_hcd *hcd, struct isp1760_qh *qh,
- struct list_head *urb_list)
-{
- int last_qtd;
- struct isp1760_qtd *qtd, *qtd_next;
- struct urb_listitem *urb_listitem;
-
- list_for_each_entry_safe(qtd, qtd_next, &qh->qtd_list, qtd_list) {
- if (qtd->status < QTD_XFER_COMPLETE)
- break;
-
- last_qtd = last_qtd_of_urb(qtd, qh);
-
- if ((!last_qtd) && (qtd->status == QTD_RETIRE))
- qtd_next->status = QTD_RETIRE;
-
- if (qtd->status == QTD_XFER_COMPLETE) {
- if (qtd->actual_length) {
- switch (qtd->packet_type) {
- case IN_PID:
- mem_reads8(hcd->regs, qtd->payload_addr,
- qtd->data_buffer,
- qtd->actual_length);
- /* Fall through (?) */
- case OUT_PID:
- qtd->urb->actual_length +=
- qtd->actual_length;
- /* Fall through ... */
- case SETUP_PID:
- break;
- }
- }
-
- if (is_short_bulk(qtd)) {
- if (qtd->urb->transfer_flags & URB_SHORT_NOT_OK)
- qtd->urb->status = -EREMOTEIO;
- if (!last_qtd)
- qtd_next->status = QTD_RETIRE;
- }
- }
-
- if (qtd->payload_addr)
- free_mem(hcd, qtd);
-
- if (last_qtd) {
- if ((qtd->status == QTD_RETIRE) &&
- (qtd->urb->status == -EINPROGRESS))
- qtd->urb->status = -EPIPE;
- /* Defer calling of urb_done() since it releases lock */
- urb_listitem = kmem_cache_zalloc(urb_listitem_cachep,
- GFP_ATOMIC);
- if (unlikely(!urb_listitem))
- break; /* Try again on next call */
- urb_listitem->urb = qtd->urb;
- list_add_tail(&urb_listitem->urb_list, urb_list);
- }
-
- list_del(&qtd->qtd_list);
- qtd_free(qtd);
- }
-}
-
-#define ENQUEUE_DEPTH 2
-static void enqueue_qtds(struct usb_hcd *hcd, struct isp1760_qh *qh)
-{
- struct isp1760_hcd *priv = hcd_to_priv(hcd);
- int ptd_offset;
- struct slotinfo *slots;
- int curr_slot, free_slot;
- int n;
- struct ptd ptd;
- struct isp1760_qtd *qtd;
-
- if (unlikely(list_empty(&qh->qtd_list))) {
- WARN_ON(1);
- return;
- }
-
- /* Make sure this endpoint's TT buffer is clean before queueing ptds */
- if (qh->tt_buffer_dirty)
- return;
-
- if (usb_pipeint(list_entry(qh->qtd_list.next, struct isp1760_qtd,
- qtd_list)->urb->pipe)) {
- ptd_offset = INT_PTD_OFFSET;
- slots = priv->int_slots;
- } else {
- ptd_offset = ATL_PTD_OFFSET;
- slots = priv->atl_slots;
- }
-
- free_slot = -1;
- for (curr_slot = 0; curr_slot < 32; curr_slot++) {
- if ((free_slot == -1) && (slots[curr_slot].qtd == NULL))
- free_slot = curr_slot;
- if (slots[curr_slot].qh == qh)
- break;
- }
-
- n = 0;
- list_for_each_entry(qtd, &qh->qtd_list, qtd_list) {
- if (qtd->status == QTD_ENQUEUED) {
- WARN_ON(qtd->payload_addr);
- alloc_mem(hcd, qtd);
- if ((qtd->length) && (!qtd->payload_addr))
- break;
-
- if ((qtd->length) &&
- ((qtd->packet_type == SETUP_PID) ||
- (qtd->packet_type == OUT_PID))) {
- mem_writes8(hcd->regs, qtd->payload_addr,
- qtd->data_buffer, qtd->length);
- }
-
- qtd->status = QTD_PAYLOAD_ALLOC;
- }
-
- if (qtd->status == QTD_PAYLOAD_ALLOC) {
-/*
- if ((curr_slot > 31) && (free_slot == -1))
- dev_dbg(hcd->self.controller, "%s: No slot "
- "available for transfer\n", __func__);
-*/
- /* Start xfer for this endpoint if not already done */
- if ((curr_slot > 31) && (free_slot > -1)) {
- if (usb_pipeint(qtd->urb->pipe))
- create_ptd_int(qh, qtd, &ptd);
- else
- create_ptd_atl(qh, qtd, &ptd);
-
- start_bus_transfer(hcd, ptd_offset, free_slot,
- slots, qtd, qh, &ptd);
- curr_slot = free_slot;
- }
-
- n++;
- if (n >= ENQUEUE_DEPTH)
- break;
- }
- }
-}
-
-static void schedule_ptds(struct usb_hcd *hcd)
-{
- struct isp1760_hcd *priv;
- struct isp1760_qh *qh, *qh_next;
- struct list_head *ep_queue;
- LIST_HEAD(urb_list);
- struct urb_listitem *urb_listitem, *urb_listitem_next;
- int i;
-
- if (!hcd) {
- WARN_ON(1);
- return;
- }
-
- priv = hcd_to_priv(hcd);
-
- /*
- * check finished/retired xfers, transfer payloads, call urb_done()
- */
- for (i = 0; i < QH_END; i++) {
- ep_queue = &priv->qh_list[i];
- list_for_each_entry_safe(qh, qh_next, ep_queue, qh_list) {
- collect_qtds(hcd, qh, &urb_list);
- if (list_empty(&qh->qtd_list))
- list_del(&qh->qh_list);
- }
- }
-
- list_for_each_entry_safe(urb_listitem, urb_listitem_next, &urb_list,
- urb_list) {
- isp1760_urb_done(hcd, urb_listitem->urb);
- kmem_cache_free(urb_listitem_cachep, urb_listitem);
- }
-
- /*
- * Schedule packets for transfer.
- *
- * According to USB2.0 specification:
- *
- * 1st prio: interrupt xfers, up to 80 % of bandwidth
- * 2nd prio: control xfers
- * 3rd prio: bulk xfers
- *
- * ... but let's use a simpler scheme here (mostly because ISP1761 doc
- * is very unclear on how to prioritize traffic):
- *
- * 1) Enqueue any queued control transfers, as long as payload chip mem
- * and PTD ATL slots are available.
- * 2) Enqueue any queued INT transfers, as long as payload chip mem
- * and PTD INT slots are available.
- * 3) Enqueue any queued bulk transfers, as long as payload chip mem
- * and PTD ATL slots are available.
- *
- * Use double buffering (ENQUEUE_DEPTH==2) as a compromise between
- * conservation of chip mem and performance.
- *
- * I'm sure this scheme could be improved upon!
- */
- for (i = 0; i < QH_END; i++) {
- ep_queue = &priv->qh_list[i];
- list_for_each_entry_safe(qh, qh_next, ep_queue, qh_list)
- enqueue_qtds(hcd, qh);
- }
-}
-
-#define PTD_STATE_QTD_DONE 1
-#define PTD_STATE_QTD_RELOAD 2
-#define PTD_STATE_URB_RETIRE 3
-
-static int check_int_transfer(struct usb_hcd *hcd, struct ptd *ptd,
- struct urb *urb)
-{
- __dw dw4;
- int i;
-
- dw4 = ptd->dw4;
- dw4 >>= 8;
-
- /* FIXME: ISP1761 datasheet does not say what to do with these. Do we
- need to handle these errors? Is it done in hardware? */
-
- if (ptd->dw3 & DW3_HALT_BIT) {
-
- urb->status = -EPROTO; /* Default unknown error */
-
- for (i = 0; i < 8; i++) {
- switch (dw4 & 0x7) {
- case INT_UNDERRUN:
- dev_dbg(hcd->self.controller, "%s: underrun "
- "during uFrame %d\n",
- __func__, i);
- urb->status = -ECOMM; /* Could not write data */
- break;
- case INT_EXACT:
- dev_dbg(hcd->self.controller, "%s: transaction "
- "error during uFrame %d\n",
- __func__, i);
- urb->status = -EPROTO; /* timeout, bad CRC, PID
- error etc. */
- break;
- case INT_BABBLE:
- dev_dbg(hcd->self.controller, "%s: babble "
- "error during uFrame %d\n",
- __func__, i);
- urb->status = -EOVERFLOW;
- break;
- }
- dw4 >>= 3;
- }
-
- return PTD_STATE_URB_RETIRE;
- }
-
- return PTD_STATE_QTD_DONE;
-}
-
-static int check_atl_transfer(struct usb_hcd *hcd, struct ptd *ptd,
- struct urb *urb)
-{
- WARN_ON(!ptd);
- if (ptd->dw3 & DW3_HALT_BIT) {
- if (ptd->dw3 & DW3_BABBLE_BIT)
- urb->status = -EOVERFLOW;
- else if (FROM_DW3_CERR(ptd->dw3))
- urb->status = -EPIPE; /* Stall */
- else if (ptd->dw3 & DW3_ERROR_BIT)
- urb->status = -EPROTO; /* XactErr */
- else
- urb->status = -EPROTO; /* Unknown */
-/*
- dev_dbg(hcd->self.controller, "%s: ptd error:\n"
- " dw0: %08x dw1: %08x dw2: %08x dw3: %08x\n"
- " dw4: %08x dw5: %08x dw6: %08x dw7: %08x\n",
- __func__,
- ptd->dw0, ptd->dw1, ptd->dw2, ptd->dw3,
- ptd->dw4, ptd->dw5, ptd->dw6, ptd->dw7);
-*/
- return PTD_STATE_URB_RETIRE;
- }
-
- if ((ptd->dw3 & DW3_ERROR_BIT) && (ptd->dw3 & DW3_ACTIVE_BIT)) {
- /* Transfer Error, *but* active and no HALT -> reload */
- dev_dbg(hcd->self.controller, "PID error; reloading ptd\n");
- return PTD_STATE_QTD_RELOAD;
- }
-
- if (!FROM_DW3_NAKCOUNT(ptd->dw3) && (ptd->dw3 & DW3_ACTIVE_BIT)) {
- /*
- * NAKs are handled in HW by the chip. Usually if the
- * device is not able to send data fast enough.
- * This happens mostly on slower hardware.
- */
- return PTD_STATE_QTD_RELOAD;
- }
-
- return PTD_STATE_QTD_DONE;
-}
-
-static void handle_done_ptds(struct usb_hcd *hcd)
-{
- struct isp1760_hcd *priv = hcd_to_priv(hcd);
- struct ptd ptd;
- struct isp1760_qh *qh;
- int slot;
- int state;
- struct slotinfo *slots;
- u32 ptd_offset;
- struct isp1760_qtd *qtd;
- int modified;
- int skip_map;
-
- skip_map = reg_read32(hcd->regs, HC_INT_PTD_SKIPMAP_REG);
- priv->int_done_map &= ~skip_map;
- skip_map = reg_read32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG);
- priv->atl_done_map &= ~skip_map;
-
- modified = priv->int_done_map || priv->atl_done_map;
-
- while (priv->int_done_map || priv->atl_done_map) {
- if (priv->int_done_map) {
- /* INT ptd */
- slot = __ffs(priv->int_done_map);
- priv->int_done_map &= ~(1 << slot);
- slots = priv->int_slots;
- /* This should not trigger, and could be removed if
- noone have any problems with it triggering: */
- if (!slots[slot].qh) {
- WARN_ON(1);
- continue;
- }
- ptd_offset = INT_PTD_OFFSET;
- ptd_read(hcd->regs, INT_PTD_OFFSET, slot, &ptd);
- state = check_int_transfer(hcd, &ptd,
- slots[slot].qtd->urb);
- } else {
- /* ATL ptd */
- slot = __ffs(priv->atl_done_map);
- priv->atl_done_map &= ~(1 << slot);
- slots = priv->atl_slots;
- /* This should not trigger, and could be removed if
- noone have any problems with it triggering: */
- if (!slots[slot].qh) {
- WARN_ON(1);
- continue;
- }
- ptd_offset = ATL_PTD_OFFSET;
- ptd_read(hcd->regs, ATL_PTD_OFFSET, slot, &ptd);
- state = check_atl_transfer(hcd, &ptd,
- slots[slot].qtd->urb);
- }
-
- qtd = slots[slot].qtd;
- slots[slot].qtd = NULL;
- qh = slots[slot].qh;
- slots[slot].qh = NULL;
- qh->slot = -1;
-
- WARN_ON(qtd->status != QTD_XFER_STARTED);
-
- switch (state) {
- case PTD_STATE_QTD_DONE:
- if ((usb_pipeint(qtd->urb->pipe)) &&
- (qtd->urb->dev->speed != USB_SPEED_HIGH))
- qtd->actual_length =
- FROM_DW3_SCS_NRBYTESTRANSFERRED(ptd.dw3);
- else
- qtd->actual_length =
- FROM_DW3_NRBYTESTRANSFERRED(ptd.dw3);
-
- qtd->status = QTD_XFER_COMPLETE;
- if (list_is_last(&qtd->qtd_list, &qh->qtd_list) ||
- is_short_bulk(qtd))
- qtd = NULL;
- else
- qtd = list_entry(qtd->qtd_list.next,
- typeof(*qtd), qtd_list);
-
- qh->toggle = FROM_DW3_DATA_TOGGLE(ptd.dw3);
- qh->ping = FROM_DW3_PING(ptd.dw3);
- break;
-
- case PTD_STATE_QTD_RELOAD: /* QTD_RETRY, for atls only */
- qtd->status = QTD_PAYLOAD_ALLOC;
- ptd.dw0 |= DW0_VALID_BIT;
- /* RL counter = ERR counter */
- ptd.dw3 &= ~TO_DW3_NAKCOUNT(0xf);
- ptd.dw3 |= TO_DW3_NAKCOUNT(FROM_DW2_RL(ptd.dw2));
- ptd.dw3 &= ~TO_DW3_CERR(3);
- ptd.dw3 |= TO_DW3_CERR(ERR_COUNTER);
- qh->toggle = FROM_DW3_DATA_TOGGLE(ptd.dw3);
- qh->ping = FROM_DW3_PING(ptd.dw3);
- break;
-
- case PTD_STATE_URB_RETIRE:
- qtd->status = QTD_RETIRE;
- if ((qtd->urb->dev->speed != USB_SPEED_HIGH) &&
- (qtd->urb->status != -EPIPE) &&
- (qtd->urb->status != -EREMOTEIO)) {
- qh->tt_buffer_dirty = 1;
- if (usb_hub_clear_tt_buffer(qtd->urb))
- /* Clear failed; let's hope things work
- anyway */
- qh->tt_buffer_dirty = 0;
- }
- qtd = NULL;
- qh->toggle = 0;
- qh->ping = 0;
- break;
-
- default:
- WARN_ON(1);
- continue;
- }
-
- if (qtd && (qtd->status == QTD_PAYLOAD_ALLOC)) {
- if (slots == priv->int_slots) {
- if (state == PTD_STATE_QTD_RELOAD)
- dev_err(hcd->self.controller,
- "%s: PTD_STATE_QTD_RELOAD on "
- "interrupt packet\n", __func__);
- if (state != PTD_STATE_QTD_RELOAD)
- create_ptd_int(qh, qtd, &ptd);
- } else {
- if (state != PTD_STATE_QTD_RELOAD)
- create_ptd_atl(qh, qtd, &ptd);
- }
-
- start_bus_transfer(hcd, ptd_offset, slot, slots, qtd,
- qh, &ptd);
- }
- }
-
- if (modified)
- schedule_ptds(hcd);
-}
-
-static irqreturn_t isp1760_irq(struct usb_hcd *hcd)
-{
- struct isp1760_hcd *priv = hcd_to_priv(hcd);
- u32 imask;
- irqreturn_t irqret = IRQ_NONE;
-
- spin_lock(&priv->lock);
-
- if (!(hcd->state & HC_STATE_RUNNING))
- goto leave;
-
- imask = reg_read32(hcd->regs, HC_INTERRUPT_REG);
- if (unlikely(!imask))
- goto leave;
- reg_write32(hcd->regs, HC_INTERRUPT_REG, imask); /* Clear */
-
- priv->int_done_map |= reg_read32(hcd->regs, HC_INT_PTD_DONEMAP_REG);
- priv->atl_done_map |= reg_read32(hcd->regs, HC_ATL_PTD_DONEMAP_REG);
-
- handle_done_ptds(hcd);
-
- irqret = IRQ_HANDLED;
-leave:
- spin_unlock(&priv->lock);
-
- return irqret;
-}
-
-/*
- * Workaround for problem described in chip errata 2:
- *
- * Sometimes interrupts are not generated when ATL (not INT?) completion occurs.
- * One solution suggested in the errata is to use SOF interrupts _instead_of_
- * ATL done interrupts (the "instead of" might be important since it seems
- * enabling ATL interrupts also causes the chip to sometimes - rarely - "forget"
- * to set the PTD's done bit in addition to not generating an interrupt!).
- *
- * So if we use SOF + ATL interrupts, we sometimes get stale PTDs since their
- * done bit is not being set. This is bad - it blocks the endpoint until reboot.
- *
- * If we use SOF interrupts only, we get latency between ptd completion and the
- * actual handling. This is very noticeable in testusb runs which takes several
- * minutes longer without ATL interrupts.
- *
- * A better solution is to run the code below every SLOT_CHECK_PERIOD ms. If it
- * finds active ATL slots which are older than SLOT_TIMEOUT ms, it checks the
- * slot's ACTIVE and VALID bits. If these are not set, the ptd is considered
- * completed and its done map bit is set.
- *
- * The values of SLOT_TIMEOUT and SLOT_CHECK_PERIOD have been arbitrarily chosen
- * not to cause too much lag when this HW bug occurs, while still hopefully
- * ensuring that the check does not falsely trigger.
- */
-#define SLOT_TIMEOUT 300
-#define SLOT_CHECK_PERIOD 200
-static struct timer_list errata2_timer;
-
-static void errata2_function(unsigned long data)
-{
- struct usb_hcd *hcd = (struct usb_hcd *) data;
- struct isp1760_hcd *priv = hcd_to_priv(hcd);
- int slot;
- struct ptd ptd;
- unsigned long spinflags;
-
- spin_lock_irqsave(&priv->lock, spinflags);
-
- for (slot = 0; slot < 32; slot++)
- if (priv->atl_slots[slot].qh && time_after(jiffies,
- priv->atl_slots[slot].timestamp +
- SLOT_TIMEOUT * HZ / 1000)) {
- ptd_read(hcd->regs, ATL_PTD_OFFSET, slot, &ptd);
- if (!FROM_DW0_VALID(ptd.dw0) &&
- !FROM_DW3_ACTIVE(ptd.dw3))
- priv->atl_done_map |= 1 << slot;
- }
-
- if (priv->atl_done_map)
- handle_done_ptds(hcd);
-
- spin_unlock_irqrestore(&priv->lock, spinflags);
-
- errata2_timer.expires = jiffies + SLOT_CHECK_PERIOD * HZ / 1000;
- add_timer(&errata2_timer);
-}
-
-static int isp1760_run(struct usb_hcd *hcd)
-{
- int retval;
- u32 temp;
- u32 command;
- u32 chipid;
-
- hcd->uses_new_polling = 1;
-
- hcd->state = HC_STATE_RUNNING;
-
- /* Set PTD interrupt AND & OR maps */
- reg_write32(hcd->regs, HC_ATL_IRQ_MASK_AND_REG, 0);
- reg_write32(hcd->regs, HC_ATL_IRQ_MASK_OR_REG, 0xffffffff);
- reg_write32(hcd->regs, HC_INT_IRQ_MASK_AND_REG, 0);
- reg_write32(hcd->regs, HC_INT_IRQ_MASK_OR_REG, 0xffffffff);
- reg_write32(hcd->regs, HC_ISO_IRQ_MASK_AND_REG, 0);
- reg_write32(hcd->regs, HC_ISO_IRQ_MASK_OR_REG, 0xffffffff);
- /* step 23 passed */
-
- temp = reg_read32(hcd->regs, HC_HW_MODE_CTRL);
- reg_write32(hcd->regs, HC_HW_MODE_CTRL, temp | HW_GLOBAL_INTR_EN);
-
- command = reg_read32(hcd->regs, HC_USBCMD);
- command &= ~(CMD_LRESET|CMD_RESET);
- command |= CMD_RUN;
- reg_write32(hcd->regs, HC_USBCMD, command);
-
- retval = handshake(hcd, HC_USBCMD, CMD_RUN, CMD_RUN, 250 * 1000);
- if (retval)
- return retval;
-
- /*
- * XXX
- * Spec says to write FLAG_CF as last config action, priv code grabs
- * the semaphore while doing so.
- */
- down_write(&ehci_cf_port_reset_rwsem);
- reg_write32(hcd->regs, HC_CONFIGFLAG, FLAG_CF);
-
- retval = handshake(hcd, HC_CONFIGFLAG, FLAG_CF, FLAG_CF, 250 * 1000);
- up_write(&ehci_cf_port_reset_rwsem);
- if (retval)
- return retval;
-
- init_timer(&errata2_timer);
- errata2_timer.function = errata2_function;
- errata2_timer.data = (unsigned long) hcd;
- errata2_timer.expires = jiffies + SLOT_CHECK_PERIOD * HZ / 1000;
- add_timer(&errata2_timer);
-
- chipid = reg_read32(hcd->regs, HC_CHIP_ID_REG);
- dev_info(hcd->self.controller, "USB ISP %04x HW rev. %d started\n",
- chipid & 0xffff, chipid >> 16);
-
- /* PTD Register Init Part 2, Step 28 */
-
- /* Setup registers controlling PTD checking */
- reg_write32(hcd->regs, HC_ATL_PTD_LASTPTD_REG, 0x80000000);
- reg_write32(hcd->regs, HC_INT_PTD_LASTPTD_REG, 0x80000000);
- reg_write32(hcd->regs, HC_ISO_PTD_LASTPTD_REG, 0x00000001);
- reg_write32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG, 0xffffffff);
- reg_write32(hcd->regs, HC_INT_PTD_SKIPMAP_REG, 0xffffffff);
- reg_write32(hcd->regs, HC_ISO_PTD_SKIPMAP_REG, 0xffffffff);
- reg_write32(hcd->regs, HC_BUFFER_STATUS_REG,
- ATL_BUF_FILL | INT_BUF_FILL);
-
- /* GRR this is run-once init(), being done every time the HC starts.
- * So long as they're part of class devices, we can't do it init()
- * since the class device isn't created that early.
- */
- return 0;
-}
-
-static int qtd_fill(struct isp1760_qtd *qtd, void *databuffer, size_t len)
-{
- qtd->data_buffer = databuffer;
-
- if (len > MAX_PAYLOAD_SIZE)
- len = MAX_PAYLOAD_SIZE;
- qtd->length = len;
-
- return qtd->length;
-}
-
-static void qtd_list_free(struct list_head *qtd_list)
-{
- struct isp1760_qtd *qtd, *qtd_next;
-
- list_for_each_entry_safe(qtd, qtd_next, qtd_list, qtd_list) {
- list_del(&qtd->qtd_list);
- qtd_free(qtd);
- }
-}
-
-/*
- * Packetize urb->transfer_buffer into list of packets of size wMaxPacketSize.
- * Also calculate the PID type (SETUP/IN/OUT) for each packet.
- */
-#define max_packet(wMaxPacketSize) ((wMaxPacketSize) & 0x07ff)
-static void packetize_urb(struct usb_hcd *hcd,
- struct urb *urb, struct list_head *head, gfp_t flags)
-{
- struct isp1760_qtd *qtd;
- void *buf;
- int len, maxpacketsize;
- u8 packet_type;
-
- /*
- * URBs map to sequences of QTDs: one logical transaction
- */
-
- if (!urb->transfer_buffer && urb->transfer_buffer_length) {
- /* XXX This looks like usb storage / SCSI bug */
- dev_err(hcd->self.controller,
- "buf is null, dma is %08lx len is %d\n",
- (long unsigned)urb->transfer_dma,
- urb->transfer_buffer_length);
- WARN_ON(1);
- }
-
- if (usb_pipein(urb->pipe))
- packet_type = IN_PID;
- else
- packet_type = OUT_PID;
-
- if (usb_pipecontrol(urb->pipe)) {
- qtd = qtd_alloc(flags, urb, SETUP_PID);
- if (!qtd)
- goto cleanup;
- qtd_fill(qtd, urb->setup_packet, sizeof(struct usb_ctrlrequest));
- list_add_tail(&qtd->qtd_list, head);
-
- /* for zero length DATA stages, STATUS is always IN */
- if (urb->transfer_buffer_length == 0)
- packet_type = IN_PID;
- }
-
- maxpacketsize = max_packet(usb_maxpacket(urb->dev, urb->pipe,
- usb_pipeout(urb->pipe)));
-
- /*
- * buffer gets wrapped in one or more qtds;
- * last one may be "short" (including zero len)
- * and may serve as a control status ack
- */
- buf = urb->transfer_buffer;
- len = urb->transfer_buffer_length;
-
- for (;;) {
- int this_qtd_len;
-
- qtd = qtd_alloc(flags, urb, packet_type);
- if (!qtd)
- goto cleanup;
- this_qtd_len = qtd_fill(qtd, buf, len);
- list_add_tail(&qtd->qtd_list, head);
-
- len -= this_qtd_len;
- buf += this_qtd_len;
-
- if (len <= 0)
- break;
- }
-
- /*
- * control requests may need a terminating data "status" ack;
- * bulk ones may need a terminating short packet (zero length).
- */
- if (urb->transfer_buffer_length != 0) {
- int one_more = 0;
-
- if (usb_pipecontrol(urb->pipe)) {
- one_more = 1;
- if (packet_type == IN_PID)
- packet_type = OUT_PID;
- else
- packet_type = IN_PID;
- } else if (usb_pipebulk(urb->pipe)
- && (urb->transfer_flags & URB_ZERO_PACKET)
- && !(urb->transfer_buffer_length %
- maxpacketsize)) {
- one_more = 1;
- }
- if (one_more) {
- qtd = qtd_alloc(flags, urb, packet_type);
- if (!qtd)
- goto cleanup;
-
- /* never any data in such packets */
- qtd_fill(qtd, NULL, 0);
- list_add_tail(&qtd->qtd_list, head);
- }
- }
-
- return;
-
-cleanup:
- qtd_list_free(head);
-}
-
-static int isp1760_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
- gfp_t mem_flags)
-{
- struct isp1760_hcd *priv = hcd_to_priv(hcd);
- struct list_head *ep_queue;
- struct isp1760_qh *qh, *qhit;
- unsigned long spinflags;
- LIST_HEAD(new_qtds);
- int retval;
- int qh_in_queue;
-
- switch (usb_pipetype(urb->pipe)) {
- case PIPE_CONTROL:
- ep_queue = &priv->qh_list[QH_CONTROL];
- break;
- case PIPE_BULK:
- ep_queue = &priv->qh_list[QH_BULK];
- break;
- case PIPE_INTERRUPT:
- if (urb->interval < 0)
- return -EINVAL;
- /* FIXME: Check bandwidth */
- ep_queue = &priv->qh_list[QH_INTERRUPT];
- break;
- case PIPE_ISOCHRONOUS:
- dev_err(hcd->self.controller, "%s: isochronous USB packets "
- "not yet supported\n",
- __func__);
- return -EPIPE;
- default:
- dev_err(hcd->self.controller, "%s: unknown pipe type\n",
- __func__);
- return -EPIPE;
- }
-
- if (usb_pipein(urb->pipe))
- urb->actual_length = 0;
-
- packetize_urb(hcd, urb, &new_qtds, mem_flags);
- if (list_empty(&new_qtds))
- return -ENOMEM;
-
- retval = 0;
- spin_lock_irqsave(&priv->lock, spinflags);
-
- if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
- retval = -ESHUTDOWN;
- qtd_list_free(&new_qtds);
- goto out;
- }
- retval = usb_hcd_link_urb_to_ep(hcd, urb);
- if (retval) {
- qtd_list_free(&new_qtds);
- goto out;
- }
-
- qh = urb->ep->hcpriv;
- if (qh) {
- qh_in_queue = 0;
- list_for_each_entry(qhit, ep_queue, qh_list) {
- if (qhit == qh) {
- qh_in_queue = 1;
- break;
- }
- }
- if (!qh_in_queue)
- list_add_tail(&qh->qh_list, ep_queue);
- } else {
- qh = qh_alloc(GFP_ATOMIC);
- if (!qh) {
- retval = -ENOMEM;
- usb_hcd_unlink_urb_from_ep(hcd, urb);
- qtd_list_free(&new_qtds);
- goto out;
- }
- list_add_tail(&qh->qh_list, ep_queue);
- urb->ep->hcpriv = qh;
- }
-
- list_splice_tail(&new_qtds, &qh->qtd_list);
- schedule_ptds(hcd);
-
-out:
- spin_unlock_irqrestore(&priv->lock, spinflags);
- return retval;
-}
-
-static void kill_transfer(struct usb_hcd *hcd, struct urb *urb,
- struct isp1760_qh *qh)
-{
- struct isp1760_hcd *priv = hcd_to_priv(hcd);
- int skip_map;
-
- WARN_ON(qh->slot == -1);
-
- /* We need to forcefully reclaim the slot since some transfers never
- return, e.g. interrupt transfers and NAKed bulk transfers. */
- if (usb_pipecontrol(urb->pipe) || usb_pipebulk(urb->pipe)) {
- skip_map = reg_read32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG);
- skip_map |= (1 << qh->slot);
- reg_write32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG, skip_map);
- priv->atl_slots[qh->slot].qh = NULL;
- priv->atl_slots[qh->slot].qtd = NULL;
- } else {
- skip_map = reg_read32(hcd->regs, HC_INT_PTD_SKIPMAP_REG);
- skip_map |= (1 << qh->slot);
- reg_write32(hcd->regs, HC_INT_PTD_SKIPMAP_REG, skip_map);
- priv->int_slots[qh->slot].qh = NULL;
- priv->int_slots[qh->slot].qtd = NULL;
- }
-
- qh->slot = -1;
-}
-
-/*
- * Retire the qtds beginning at 'qtd' and belonging all to the same urb, killing
- * any active transfer belonging to the urb in the process.
- */
-static void dequeue_urb_from_qtd(struct usb_hcd *hcd, struct isp1760_qh *qh,
- struct isp1760_qtd *qtd)
-{
- struct urb *urb;
- int urb_was_running;
-
- urb = qtd->urb;
- urb_was_running = 0;
- list_for_each_entry_from(qtd, &qh->qtd_list, qtd_list) {
- if (qtd->urb != urb)
- break;
-
- if (qtd->status >= QTD_XFER_STARTED)
- urb_was_running = 1;
- if (last_qtd_of_urb(qtd, qh) &&
- (qtd->status >= QTD_XFER_COMPLETE))
- urb_was_running = 0;
-
- if (qtd->status == QTD_XFER_STARTED)
- kill_transfer(hcd, urb, qh);
- qtd->status = QTD_RETIRE;
- }
-
- if ((urb->dev->speed != USB_SPEED_HIGH) && urb_was_running) {
- qh->tt_buffer_dirty = 1;
- if (usb_hub_clear_tt_buffer(urb))
- /* Clear failed; let's hope things work anyway */
- qh->tt_buffer_dirty = 0;
- }
-}
-
-static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb,
- int status)
-{
- struct isp1760_hcd *priv = hcd_to_priv(hcd);
- unsigned long spinflags;
- struct isp1760_qh *qh;
- struct isp1760_qtd *qtd;
- int retval = 0;
-
- spin_lock_irqsave(&priv->lock, spinflags);
- retval = usb_hcd_check_unlink_urb(hcd, urb, status);
- if (retval)
- goto out;
-
- qh = urb->ep->hcpriv;
- if (!qh) {
- retval = -EINVAL;
- goto out;
- }
-
- list_for_each_entry(qtd, &qh->qtd_list, qtd_list)
- if (qtd->urb == urb) {
- dequeue_urb_from_qtd(hcd, qh, qtd);
- list_move(&qtd->qtd_list, &qh->qtd_list);
- break;
- }
-
- urb->status = status;
- schedule_ptds(hcd);
-
-out:
- spin_unlock_irqrestore(&priv->lock, spinflags);
- return retval;
-}
-
-static void isp1760_endpoint_disable(struct usb_hcd *hcd,
- struct usb_host_endpoint *ep)
-{
- struct isp1760_hcd *priv = hcd_to_priv(hcd);
- unsigned long spinflags;
- struct isp1760_qh *qh, *qh_iter;
- int i;
-
- spin_lock_irqsave(&priv->lock, spinflags);
-
- qh = ep->hcpriv;
- if (!qh)
- goto out;
-
- WARN_ON(!list_empty(&qh->qtd_list));
-
- for (i = 0; i < QH_END; i++)
- list_for_each_entry(qh_iter, &priv->qh_list[i], qh_list)
- if (qh_iter == qh) {
- list_del(&qh_iter->qh_list);
- i = QH_END;
- break;
- }
- qh_free(qh);
- ep->hcpriv = NULL;
-
- schedule_ptds(hcd);
-
-out:
- spin_unlock_irqrestore(&priv->lock, spinflags);
-}
-
-static int isp1760_hub_status_data(struct usb_hcd *hcd, char *buf)
-{
- struct isp1760_hcd *priv = hcd_to_priv(hcd);
- u32 temp, status = 0;
- u32 mask;
- int retval = 1;
- unsigned long flags;
-
- /* if !PM, root hub timers won't get shut down ... */
- if (!HC_IS_RUNNING(hcd->state))
- return 0;
-
- /* init status to no-changes */
- buf[0] = 0;
- mask = PORT_CSC;
-
- spin_lock_irqsave(&priv->lock, flags);
- temp = reg_read32(hcd->regs, HC_PORTSC1);
-
- if (temp & PORT_OWNER) {
- if (temp & PORT_CSC) {
- temp &= ~PORT_CSC;
- reg_write32(hcd->regs, HC_PORTSC1, temp);
- goto done;
- }
- }
-
- /*
- * Return status information even for ports with OWNER set.
- * Otherwise hub_wq wouldn't see the disconnect event when a
- * high-speed device is switched over to the companion
- * controller by the user.
- */
-
- if ((temp & mask) != 0
- || ((temp & PORT_RESUME) != 0
- && time_after_eq(jiffies,
- priv->reset_done))) {
- buf [0] |= 1 << (0 + 1);
- status = STS_PCD;
- }
- /* FIXME autosuspend idle root hubs */
-done:
- spin_unlock_irqrestore(&priv->lock, flags);
- return status ? retval : 0;
-}
-
-static void isp1760_hub_descriptor(struct isp1760_hcd *priv,
- struct usb_hub_descriptor *desc)
-{
- int ports = HCS_N_PORTS(priv->hcs_params);
- u16 temp;
-
- desc->bDescriptorType = 0x29;
- /* priv 1.0, 2.3.9 says 20ms max */
- desc->bPwrOn2PwrGood = 10;
- desc->bHubContrCurrent = 0;
-
- desc->bNbrPorts = ports;
- temp = 1 + (ports / 8);
- desc->bDescLength = 7 + 2 * temp;
-
- /* ports removable, and usb 1.0 legacy PortPwrCtrlMask */
- memset(&desc->u.hs.DeviceRemovable[0], 0, temp);
- memset(&desc->u.hs.DeviceRemovable[temp], 0xff, temp);
-
- /* per-port overcurrent reporting */
- temp = 0x0008;
- if (HCS_PPC(priv->hcs_params))
- /* per-port power control */
- temp |= 0x0001;
- else
- /* no power switching */
- temp |= 0x0002;
- desc->wHubCharacteristics = cpu_to_le16(temp);
-}
-
-#define PORT_WAKE_BITS (PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E)
-
-static int check_reset_complete(struct usb_hcd *hcd, int index,
- int port_status)
-{
- if (!(port_status & PORT_CONNECT))
- return port_status;
-
- /* if reset finished and it's still not enabled -- handoff */
- if (!(port_status & PORT_PE)) {
-
- dev_info(hcd->self.controller,
- "port %d full speed --> companion\n",
- index + 1);
-
- port_status |= PORT_OWNER;
- port_status &= ~PORT_RWC_BITS;
- reg_write32(hcd->regs, HC_PORTSC1, port_status);
-
- } else
- dev_info(hcd->self.controller, "port %d high speed\n",
- index + 1);
-
- return port_status;
-}
-
-static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq,
- u16 wValue, u16 wIndex, char *buf, u16 wLength)
-{
- struct isp1760_hcd *priv = hcd_to_priv(hcd);
- int ports = HCS_N_PORTS(priv->hcs_params);
- u32 temp, status;
- unsigned long flags;
- int retval = 0;
- unsigned selector;
-
- /*
- * FIXME: support SetPortFeatures USB_PORT_FEAT_INDICATOR.
- * HCS_INDICATOR may say we can change LEDs to off/amber/green.
- * (track current state ourselves) ... blink for diagnostics,
- * power, "this is the one", etc. EHCI spec supports this.
- */
-
- spin_lock_irqsave(&priv->lock, flags);
- switch (typeReq) {
- case ClearHubFeature:
- switch (wValue) {
- case C_HUB_LOCAL_POWER:
- case C_HUB_OVER_CURRENT:
- /* no hub-wide feature/status flags */
- break;
- default:
- goto error;
- }
- break;
- case ClearPortFeature:
- if (!wIndex || wIndex > ports)
- goto error;
- wIndex--;
- temp = reg_read32(hcd->regs, HC_PORTSC1);
-
- /*
- * Even if OWNER is set, so the port is owned by the
- * companion controller, hub_wq needs to be able to clear
- * the port-change status bits (especially
- * USB_PORT_STAT_C_CONNECTION).
- */
-
- switch (wValue) {
- case USB_PORT_FEAT_ENABLE:
- reg_write32(hcd->regs, HC_PORTSC1, temp & ~PORT_PE);
- break;
- case USB_PORT_FEAT_C_ENABLE:
- /* XXX error? */
- break;
- case USB_PORT_FEAT_SUSPEND:
- if (temp & PORT_RESET)
- goto error;
-
- if (temp & PORT_SUSPEND) {
- if ((temp & PORT_PE) == 0)
- goto error;
- /* resume signaling for 20 msec */
- temp &= ~(PORT_RWC_BITS);
- reg_write32(hcd->regs, HC_PORTSC1,
- temp | PORT_RESUME);
- priv->reset_done = jiffies +
- msecs_to_jiffies(20);
- }
- break;
- case USB_PORT_FEAT_C_SUSPEND:
- /* we auto-clear this feature */
- break;
- case USB_PORT_FEAT_POWER:
- if (HCS_PPC(priv->hcs_params))
- reg_write32(hcd->regs, HC_PORTSC1,
- temp & ~PORT_POWER);
- break;
- case USB_PORT_FEAT_C_CONNECTION:
- reg_write32(hcd->regs, HC_PORTSC1, temp | PORT_CSC);
- break;
- case USB_PORT_FEAT_C_OVER_CURRENT:
- /* XXX error ?*/
- break;
- case USB_PORT_FEAT_C_RESET:
- /* GetPortStatus clears reset */
- break;
- default:
- goto error;
- }
- reg_read32(hcd->regs, HC_USBCMD);
- break;
- case GetHubDescriptor:
- isp1760_hub_descriptor(priv, (struct usb_hub_descriptor *)
- buf);
- break;
- case GetHubStatus:
- /* no hub-wide feature/status flags */
- memset(buf, 0, 4);
- break;
- case GetPortStatus:
- if (!wIndex || wIndex > ports)
- goto error;
- wIndex--;
- status = 0;
- temp = reg_read32(hcd->regs, HC_PORTSC1);
-
- /* wPortChange bits */
- if (temp & PORT_CSC)
- status |= USB_PORT_STAT_C_CONNECTION << 16;
-
-
- /* whoever resumes must GetPortStatus to complete it!! */
- if (temp & PORT_RESUME) {
- dev_err(hcd->self.controller, "Port resume should be skipped.\n");
-
- /* Remote Wakeup received? */
- if (!priv->reset_done) {
- /* resume signaling for 20 msec */
- priv->reset_done = jiffies
- + msecs_to_jiffies(20);
- /* check the port again */
- mod_timer(&hcd->rh_timer, priv->reset_done);
- }
-
- /* resume completed? */
- else if (time_after_eq(jiffies,
- priv->reset_done)) {
- status |= USB_PORT_STAT_C_SUSPEND << 16;
- priv->reset_done = 0;
-
- /* stop resume signaling */
- temp = reg_read32(hcd->regs, HC_PORTSC1);
- reg_write32(hcd->regs, HC_PORTSC1,
- temp & ~(PORT_RWC_BITS | PORT_RESUME));
- retval = handshake(hcd, HC_PORTSC1,
- PORT_RESUME, 0, 2000 /* 2msec */);
- if (retval != 0) {
- dev_err(hcd->self.controller,
- "port %d resume error %d\n",
- wIndex + 1, retval);
- goto error;
- }
- temp &= ~(PORT_SUSPEND|PORT_RESUME|(3<<10));
- }
- }
-
- /* whoever resets must GetPortStatus to complete it!! */
- if ((temp & PORT_RESET)
- && time_after_eq(jiffies,
- priv->reset_done)) {
- status |= USB_PORT_STAT_C_RESET << 16;
- priv->reset_done = 0;
-
- /* force reset to complete */
- reg_write32(hcd->regs, HC_PORTSC1, temp & ~PORT_RESET);
- /* REVISIT: some hardware needs 550+ usec to clear
- * this bit; seems too long to spin routinely...
- */
- retval = handshake(hcd, HC_PORTSC1,
- PORT_RESET, 0, 750);
- if (retval != 0) {
- dev_err(hcd->self.controller, "port %d reset error %d\n",
- wIndex + 1, retval);
- goto error;
- }
-
- /* see what we found out */
- temp = check_reset_complete(hcd, wIndex,
- reg_read32(hcd->regs, HC_PORTSC1));
- }
- /*
- * Even if OWNER is set, there's no harm letting hub_wq
- * see the wPortStatus values (they should all be 0 except
- * for PORT_POWER anyway).
- */
-
- if (temp & PORT_OWNER)
- dev_err(hcd->self.controller, "PORT_OWNER is set\n");
-
- if (temp & PORT_CONNECT) {
- status |= USB_PORT_STAT_CONNECTION;
- /* status may be from integrated TT */
- status |= USB_PORT_STAT_HIGH_SPEED;
- }
- if (temp & PORT_PE)
- status |= USB_PORT_STAT_ENABLE;
- if (temp & (PORT_SUSPEND|PORT_RESUME))
- status |= USB_PORT_STAT_SUSPEND;
- if (temp & PORT_RESET)
- status |= USB_PORT_STAT_RESET;
- if (temp & PORT_POWER)
- status |= USB_PORT_STAT_POWER;
-
- put_unaligned(cpu_to_le32(status), (__le32 *) buf);
- break;
- case SetHubFeature:
- switch (wValue) {
- case C_HUB_LOCAL_POWER:
- case C_HUB_OVER_CURRENT:
- /* no hub-wide feature/status flags */
- break;
- default:
- goto error;
- }
- break;
- case SetPortFeature:
- selector = wIndex >> 8;
- wIndex &= 0xff;
- if (!wIndex || wIndex > ports)
- goto error;
- wIndex--;
- temp = reg_read32(hcd->regs, HC_PORTSC1);
- if (temp & PORT_OWNER)
- break;
-
-/* temp &= ~PORT_RWC_BITS; */
- switch (wValue) {
- case USB_PORT_FEAT_ENABLE:
- reg_write32(hcd->regs, HC_PORTSC1, temp | PORT_PE);
- break;
-
- case USB_PORT_FEAT_SUSPEND:
- if ((temp & PORT_PE) == 0
- || (temp & PORT_RESET) != 0)
- goto error;
-
- reg_write32(hcd->regs, HC_PORTSC1, temp | PORT_SUSPEND);
- break;
- case USB_PORT_FEAT_POWER:
- if (HCS_PPC(priv->hcs_params))
- reg_write32(hcd->regs, HC_PORTSC1,
- temp | PORT_POWER);
- break;
- case USB_PORT_FEAT_RESET:
- if (temp & PORT_RESUME)
- goto error;
- /* line status bits may report this as low speed,
- * which can be fine if this root hub has a
- * transaction translator built in.
- */
- if ((temp & (PORT_PE|PORT_CONNECT)) == PORT_CONNECT
- && PORT_USB11(temp)) {
- temp |= PORT_OWNER;
- } else {
- temp |= PORT_RESET;
- temp &= ~PORT_PE;
-
- /*
- * caller must wait, then call GetPortStatus
- * usb 2.0 spec says 50 ms resets on root
- */
- priv->reset_done = jiffies +
- msecs_to_jiffies(50);
- }
- reg_write32(hcd->regs, HC_PORTSC1, temp);
- break;
- default:
- goto error;
- }
- reg_read32(hcd->regs, HC_USBCMD);
- break;
-
- default:
-error:
- /* "stall" on error */
- retval = -EPIPE;
- }
- spin_unlock_irqrestore(&priv->lock, flags);
- return retval;
-}
-
-static int isp1760_get_frame(struct usb_hcd *hcd)
-{
- struct isp1760_hcd *priv = hcd_to_priv(hcd);
- u32 fr;
-
- fr = reg_read32(hcd->regs, HC_FRINDEX);
- return (fr >> 3) % priv->periodic_size;
-}
-
-static void isp1760_stop(struct usb_hcd *hcd)
-{
- struct isp1760_hcd *priv = hcd_to_priv(hcd);
- u32 temp;
-
- del_timer(&errata2_timer);
-
- isp1760_hub_control(hcd, ClearPortFeature, USB_PORT_FEAT_POWER, 1,
- NULL, 0);
- mdelay(20);
-
- spin_lock_irq(&priv->lock);
- ehci_reset(hcd);
- /* Disable IRQ */
- temp = reg_read32(hcd->regs, HC_HW_MODE_CTRL);
- reg_write32(hcd->regs, HC_HW_MODE_CTRL, temp &= ~HW_GLOBAL_INTR_EN);
- spin_unlock_irq(&priv->lock);
-
- reg_write32(hcd->regs, HC_CONFIGFLAG, 0);
-}
-
-static void isp1760_shutdown(struct usb_hcd *hcd)
-{
- u32 command, temp;
-
- isp1760_stop(hcd);
- temp = reg_read32(hcd->regs, HC_HW_MODE_CTRL);
- reg_write32(hcd->regs, HC_HW_MODE_CTRL, temp &= ~HW_GLOBAL_INTR_EN);
-
- command = reg_read32(hcd->regs, HC_USBCMD);
- command &= ~CMD_RUN;
- reg_write32(hcd->regs, HC_USBCMD, command);
-}
-
-static void isp1760_clear_tt_buffer_complete(struct usb_hcd *hcd,
- struct usb_host_endpoint *ep)
-{
- struct isp1760_hcd *priv = hcd_to_priv(hcd);
- struct isp1760_qh *qh = ep->hcpriv;
- unsigned long spinflags;
-
- if (!qh)
- return;
-
- spin_lock_irqsave(&priv->lock, spinflags);
- qh->tt_buffer_dirty = 0;
- schedule_ptds(hcd);
- spin_unlock_irqrestore(&priv->lock, spinflags);
-}
-
-
-static const struct hc_driver isp1760_hc_driver = {
- .description = "isp1760-hcd",
- .product_desc = "NXP ISP1760 USB Host Controller",
- .hcd_priv_size = sizeof(struct isp1760_hcd),
- .irq = isp1760_irq,
- .flags = HCD_MEMORY | HCD_USB2,
- .reset = isp1760_hc_setup,
- .start = isp1760_run,
- .stop = isp1760_stop,
- .shutdown = isp1760_shutdown,
- .urb_enqueue = isp1760_urb_enqueue,
- .urb_dequeue = isp1760_urb_dequeue,
- .endpoint_disable = isp1760_endpoint_disable,
- .get_frame_number = isp1760_get_frame,
- .hub_status_data = isp1760_hub_status_data,
- .hub_control = isp1760_hub_control,
- .clear_tt_buffer_complete = isp1760_clear_tt_buffer_complete,
-};
-
-int __init init_kmem_once(void)
-{
- urb_listitem_cachep = kmem_cache_create("isp1760_urb_listitem",
- sizeof(struct urb_listitem), 0, SLAB_TEMPORARY |
- SLAB_MEM_SPREAD, NULL);
-
- if (!urb_listitem_cachep)
- return -ENOMEM;
-
- qtd_cachep = kmem_cache_create("isp1760_qtd",
- sizeof(struct isp1760_qtd), 0, SLAB_TEMPORARY |
- SLAB_MEM_SPREAD, NULL);
-
- if (!qtd_cachep)
- return -ENOMEM;
-
- qh_cachep = kmem_cache_create("isp1760_qh", sizeof(struct isp1760_qh),
- 0, SLAB_TEMPORARY | SLAB_MEM_SPREAD, NULL);
-
- if (!qh_cachep) {
- kmem_cache_destroy(qtd_cachep);
- return -ENOMEM;
- }
-
- return 0;
-}
-
-void deinit_kmem_cache(void)
-{
- kmem_cache_destroy(qtd_cachep);
- kmem_cache_destroy(qh_cachep);
- kmem_cache_destroy(urb_listitem_cachep);
-}
-
-struct usb_hcd *isp1760_register(phys_addr_t res_start, resource_size_t res_len,
- int irq, unsigned long irqflags,
- int rst_gpio,
- struct device *dev, const char *busname,
- unsigned int devflags)
-{
- struct usb_hcd *hcd;
- struct isp1760_hcd *priv;
- int ret;
-
- if (usb_disabled())
- return ERR_PTR(-ENODEV);
-
- /* prevent usb-core allocating DMA pages */
- dev->dma_mask = NULL;
-
- hcd = usb_create_hcd(&isp1760_hc_driver, dev, dev_name(dev));
- if (!hcd)
- return ERR_PTR(-ENOMEM);
-
- priv = hcd_to_priv(hcd);
- priv->devflags = devflags;
- priv->rst_gpio = rst_gpio;
- init_memory(priv);
- hcd->regs = ioremap(res_start, res_len);
- if (!hcd->regs) {
- ret = -EIO;
- goto err_put;
- }
-
- hcd->irq = irq;
- hcd->rsrc_start = res_start;
- hcd->rsrc_len = res_len;
-
- ret = usb_add_hcd(hcd, irq, irqflags);
- if (ret)
- goto err_unmap;
- device_wakeup_enable(hcd->self.controller);
-
- return hcd;
-
-err_unmap:
- iounmap(hcd->regs);
-
-err_put:
- usb_put_hcd(hcd);
-
- return ERR_PTR(ret);
-}
-
-MODULE_DESCRIPTION("Driver for the ISP1760 USB-controller from NXP");
-MODULE_AUTHOR("Sebastian Siewior <bigeasy@linuxtronix.de>");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/host/isp1760-hcd.h b/drivers/usb/host/isp1760-hcd.h
deleted file mode 100644
index 33dc79ccaa6b..000000000000
--- a/drivers/usb/host/isp1760-hcd.h
+++ /dev/null
@@ -1,208 +0,0 @@
-#ifndef _ISP1760_HCD_H_
-#define _ISP1760_HCD_H_
-
-/* exports for if */
-struct usb_hcd *isp1760_register(phys_addr_t res_start, resource_size_t res_len,
- int irq, unsigned long irqflags,
- int rst_gpio,
- struct device *dev, const char *busname,
- unsigned int devflags);
-int init_kmem_once(void);
-void deinit_kmem_cache(void);
-
-/* EHCI capability registers */
-#define HC_CAPLENGTH 0x00
-#define HC_HCSPARAMS 0x04
-#define HC_HCCPARAMS 0x08
-
-/* EHCI operational registers */
-#define HC_USBCMD 0x20
-#define HC_USBSTS 0x24
-#define HC_FRINDEX 0x2c
-#define HC_CONFIGFLAG 0x60
-#define HC_PORTSC1 0x64
-#define HC_ISO_PTD_DONEMAP_REG 0x130
-#define HC_ISO_PTD_SKIPMAP_REG 0x134
-#define HC_ISO_PTD_LASTPTD_REG 0x138
-#define HC_INT_PTD_DONEMAP_REG 0x140
-#define HC_INT_PTD_SKIPMAP_REG 0x144
-#define HC_INT_PTD_LASTPTD_REG 0x148
-#define HC_ATL_PTD_DONEMAP_REG 0x150
-#define HC_ATL_PTD_SKIPMAP_REG 0x154
-#define HC_ATL_PTD_LASTPTD_REG 0x158
-
-/* Configuration Register */
-#define HC_HW_MODE_CTRL 0x300
-#define ALL_ATX_RESET (1 << 31)
-#define HW_ANA_DIGI_OC (1 << 15)
-#define HW_DATA_BUS_32BIT (1 << 8)
-#define HW_DACK_POL_HIGH (1 << 6)
-#define HW_DREQ_POL_HIGH (1 << 5)
-#define HW_INTR_HIGH_ACT (1 << 2)
-#define HW_INTR_EDGE_TRIG (1 << 1)
-#define HW_GLOBAL_INTR_EN (1 << 0)
-
-#define HC_CHIP_ID_REG 0x304
-#define HC_SCRATCH_REG 0x308
-
-#define HC_RESET_REG 0x30c
-#define SW_RESET_RESET_HC (1 << 1)
-#define SW_RESET_RESET_ALL (1 << 0)
-
-#define HC_BUFFER_STATUS_REG 0x334
-#define ISO_BUF_FILL (1 << 2)
-#define INT_BUF_FILL (1 << 1)
-#define ATL_BUF_FILL (1 << 0)
-
-#define HC_MEMORY_REG 0x33c
-#define ISP_BANK(x) ((x) << 16)
-
-#define HC_PORT1_CTRL 0x374
-#define PORT1_POWER (3 << 3)
-#define PORT1_INIT1 (1 << 7)
-#define PORT1_INIT2 (1 << 23)
-#define HW_OTG_CTRL_SET 0x374
-#define HW_OTG_CTRL_CLR 0x376
-
-/* Interrupt Register */
-#define HC_INTERRUPT_REG 0x310
-
-#define HC_INTERRUPT_ENABLE 0x314
-#define HC_ISO_INT (1 << 9)
-#define HC_ATL_INT (1 << 8)
-#define HC_INTL_INT (1 << 7)
-#define HC_EOT_INT (1 << 3)
-#define HC_SOT_INT (1 << 1)
-#define INTERRUPT_ENABLE_MASK (HC_INTL_INT | HC_ATL_INT)
-
-#define HC_ISO_IRQ_MASK_OR_REG 0x318
-#define HC_INT_IRQ_MASK_OR_REG 0x31C
-#define HC_ATL_IRQ_MASK_OR_REG 0x320
-#define HC_ISO_IRQ_MASK_AND_REG 0x324
-#define HC_INT_IRQ_MASK_AND_REG 0x328
-#define HC_ATL_IRQ_MASK_AND_REG 0x32C
-
-/* urb state*/
-#define DELETE_URB (0x0008)
-#define NO_TRANSFER_ACTIVE (0xffffffff)
-
-/* Philips Proprietary Transfer Descriptor (PTD) */
-typedef __u32 __bitwise __dw;
-struct ptd {
- __dw dw0;
- __dw dw1;
- __dw dw2;
- __dw dw3;
- __dw dw4;
- __dw dw5;
- __dw dw6;
- __dw dw7;
-};
-#define PTD_OFFSET 0x0400
-#define ISO_PTD_OFFSET 0x0400
-#define INT_PTD_OFFSET 0x0800
-#define ATL_PTD_OFFSET 0x0c00
-#define PAYLOAD_OFFSET 0x1000
-
-struct slotinfo {
- struct isp1760_qh *qh;
- struct isp1760_qtd *qtd;
- unsigned long timestamp;
-};
-
-
-typedef void (packet_enqueue)(struct usb_hcd *hcd, struct isp1760_qh *qh,
- struct isp1760_qtd *qtd);
-
-/*
- * Device flags that can vary from board to board. All of these
- * indicate the most "atypical" case, so that a devflags of 0 is
- * a sane default configuration.
- */
-#define ISP1760_FLAG_BUS_WIDTH_16 0x00000002 /* 16-bit data bus width */
-#define ISP1760_FLAG_OTG_EN 0x00000004 /* Port 1 supports OTG */
-#define ISP1760_FLAG_ANALOG_OC 0x00000008 /* Analog overcurrent */
-#define ISP1760_FLAG_DACK_POL_HIGH 0x00000010 /* DACK active high */
-#define ISP1760_FLAG_DREQ_POL_HIGH 0x00000020 /* DREQ active high */
-#define ISP1760_FLAG_ISP1761 0x00000040 /* Chip is ISP1761 */
-#define ISP1760_FLAG_INTR_POL_HIGH 0x00000080 /* Interrupt polarity active high */
-#define ISP1760_FLAG_INTR_EDGE_TRIG 0x00000100 /* Interrupt edge triggered */
-#define ISP1760_FLAG_RESET_ACTIVE_HIGH 0x80000000 /* RESET GPIO active high */
-
-/* chip memory management */
-struct memory_chunk {
- unsigned int start;
- unsigned int size;
- unsigned int free;
-};
-
-/*
- * 60kb divided in:
- * - 32 blocks @ 256 bytes
- * - 20 blocks @ 1024 bytes
- * - 4 blocks @ 8192 bytes
- */
-
-#define BLOCK_1_NUM 32
-#define BLOCK_2_NUM 20
-#define BLOCK_3_NUM 4
-
-#define BLOCK_1_SIZE 256
-#define BLOCK_2_SIZE 1024
-#define BLOCK_3_SIZE 8192
-#define BLOCKS (BLOCK_1_NUM + BLOCK_2_NUM + BLOCK_3_NUM)
-#define MAX_PAYLOAD_SIZE BLOCK_3_SIZE
-#define PAYLOAD_AREA_SIZE 0xf000
-
-/* ATL */
-/* DW0 */
-#define DW0_VALID_BIT 1
-#define FROM_DW0_VALID(x) ((x) & 0x01)
-#define TO_DW0_LENGTH(x) (((u32) x) << 3)
-#define TO_DW0_MAXPACKET(x) (((u32) x) << 18)
-#define TO_DW0_MULTI(x) (((u32) x) << 29)
-#define TO_DW0_ENDPOINT(x) (((u32) x) << 31)
-/* DW1 */
-#define TO_DW1_DEVICE_ADDR(x) (((u32) x) << 3)
-#define TO_DW1_PID_TOKEN(x) (((u32) x) << 10)
-#define DW1_TRANS_BULK ((u32) 2 << 12)
-#define DW1_TRANS_INT ((u32) 3 << 12)
-#define DW1_TRANS_SPLIT ((u32) 1 << 14)
-#define DW1_SE_USB_LOSPEED ((u32) 2 << 16)
-#define TO_DW1_PORT_NUM(x) (((u32) x) << 18)
-#define TO_DW1_HUB_NUM(x) (((u32) x) << 25)
-/* DW2 */
-#define TO_DW2_DATA_START_ADDR(x) (((u32) x) << 8)
-#define TO_DW2_RL(x) ((x) << 25)
-#define FROM_DW2_RL(x) (((x) >> 25) & 0xf)
-/* DW3 */
-#define FROM_DW3_NRBYTESTRANSFERRED(x) ((x) & 0x7fff)
-#define FROM_DW3_SCS_NRBYTESTRANSFERRED(x) ((x) & 0x07ff)
-#define TO_DW3_NAKCOUNT(x) ((x) << 19)
-#define FROM_DW3_NAKCOUNT(x) (((x) >> 19) & 0xf)
-#define TO_DW3_CERR(x) ((x) << 23)
-#define FROM_DW3_CERR(x) (((x) >> 23) & 0x3)
-#define TO_DW3_DATA_TOGGLE(x) ((x) << 25)
-#define FROM_DW3_DATA_TOGGLE(x) (((x) >> 25) & 0x1)
-#define TO_DW3_PING(x) ((x) << 26)
-#define FROM_DW3_PING(x) (((x) >> 26) & 0x1)
-#define DW3_ERROR_BIT (1 << 28)
-#define DW3_BABBLE_BIT (1 << 29)
-#define DW3_HALT_BIT (1 << 30)
-#define DW3_ACTIVE_BIT (1 << 31)
-#define FROM_DW3_ACTIVE(x) (((x) >> 31) & 0x01)
-
-#define INT_UNDERRUN (1 << 2)
-#define INT_BABBLE (1 << 1)
-#define INT_EXACT (1 << 0)
-
-#define SETUP_PID (2)
-#define IN_PID (1)
-#define OUT_PID (0)
-
-/* Errata 1 */
-#define RL_COUNTER (0)
-#define NAK_COUNTER (0)
-#define ERR_COUNTER (2)
-
-#endif /* _ISP1760_HCD_H_ */
diff --git a/drivers/usb/host/isp1760-if.c b/drivers/usb/host/isp1760-if.c
deleted file mode 100644
index 09254a43bc01..000000000000
--- a/drivers/usb/host/isp1760-if.c
+++ /dev/null
@@ -1,477 +0,0 @@
-/*
- * Glue code for the ISP1760 driver and bus
- * Currently there is support for
- * - OpenFirmware
- * - PCI
- * - PDEV (generic platform device centralized driver model)
- *
- * (c) 2007 Sebastian Siewior <bigeasy@linutronix.de>
- *
- */
-
-#include <linux/usb.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/usb/isp1760.h>
-#include <linux/usb/hcd.h>
-
-#include "isp1760-hcd.h"
-
-#if defined(CONFIG_OF) && defined(CONFIG_OF_IRQ)
-#include <linux/slab.h>
-#include <linux/of.h>
-#include <linux/of_platform.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/of_gpio.h>
-#endif
-
-#ifdef CONFIG_PCI
-#include <linux/pci.h>
-#endif
-
-#if defined(CONFIG_OF) && defined(CONFIG_OF_IRQ)
-struct isp1760 {
- struct usb_hcd *hcd;
- int rst_gpio;
-};
-
-static int of_isp1760_probe(struct platform_device *dev)
-{
- struct isp1760 *drvdata;
- struct device_node *dp = dev->dev.of_node;
- struct resource *res;
- struct resource memory;
- int virq;
- resource_size_t res_len;
- int ret;
- unsigned int devflags = 0;
- enum of_gpio_flags gpio_flags;
- u32 bus_width = 0;
-
- drvdata = kzalloc(sizeof(*drvdata), GFP_KERNEL);
- if (!drvdata)
- return -ENOMEM;
-
- ret = of_address_to_resource(dp, 0, &memory);
- if (ret) {
- ret = -ENXIO;
- goto free_data;
- }
-
- res_len = resource_size(&memory);
-
- res = request_mem_region(memory.start, res_len, dev_name(&dev->dev));
- if (!res) {
- ret = -EBUSY;
- goto free_data;
- }
-
- virq = irq_of_parse_and_map(dp, 0);
- if (!virq) {
- ret = -ENODEV;
- goto release_reg;
- }
-
- if (of_device_is_compatible(dp, "nxp,usb-isp1761"))
- devflags |= ISP1760_FLAG_ISP1761;
-
- /* Some systems wire up only 16 of the 32 data lines */
- of_property_read_u32(dp, "bus-width", &bus_width);
- if (bus_width == 16)
- devflags |= ISP1760_FLAG_BUS_WIDTH_16;
-
- if (of_get_property(dp, "port1-otg", NULL) != NULL)
- devflags |= ISP1760_FLAG_OTG_EN;
-
- if (of_get_property(dp, "analog-oc", NULL) != NULL)
- devflags |= ISP1760_FLAG_ANALOG_OC;
-
- if (of_get_property(dp, "dack-polarity", NULL) != NULL)
- devflags |= ISP1760_FLAG_DACK_POL_HIGH;
-
- if (of_get_property(dp, "dreq-polarity", NULL) != NULL)
- devflags |= ISP1760_FLAG_DREQ_POL_HIGH;
-
- drvdata->rst_gpio = of_get_gpio_flags(dp, 0, &gpio_flags);
- if (gpio_is_valid(drvdata->rst_gpio)) {
- ret = gpio_request(drvdata->rst_gpio, dev_name(&dev->dev));
- if (!ret) {
- if (!(gpio_flags & OF_GPIO_ACTIVE_LOW)) {
- devflags |= ISP1760_FLAG_RESET_ACTIVE_HIGH;
- gpio_direction_output(drvdata->rst_gpio, 0);
- } else {
- gpio_direction_output(drvdata->rst_gpio, 1);
- }
- } else {
- drvdata->rst_gpio = ret;
- }
- }
-
- drvdata->hcd = isp1760_register(memory.start, res_len, virq,
- IRQF_SHARED, drvdata->rst_gpio,
- &dev->dev, dev_name(&dev->dev),
- devflags);
- if (IS_ERR(drvdata->hcd)) {
- ret = PTR_ERR(drvdata->hcd);
- goto free_gpio;
- }
-
- platform_set_drvdata(dev, drvdata);
- return ret;
-
-free_gpio:
- if (gpio_is_valid(drvdata->rst_gpio))
- gpio_free(drvdata->rst_gpio);
-release_reg:
- release_mem_region(memory.start, res_len);
-free_data:
- kfree(drvdata);
- return ret;
-}
-
-static int of_isp1760_remove(struct platform_device *dev)
-{
- struct isp1760 *drvdata = platform_get_drvdata(dev);
-
- usb_remove_hcd(drvdata->hcd);
- iounmap(drvdata->hcd->regs);
- release_mem_region(drvdata->hcd->rsrc_start, drvdata->hcd->rsrc_len);
- usb_put_hcd(drvdata->hcd);
-
- if (gpio_is_valid(drvdata->rst_gpio))
- gpio_free(drvdata->rst_gpio);
-
- kfree(drvdata);
- return 0;
-}
-
-static const struct of_device_id of_isp1760_match[] = {
- {
- .compatible = "nxp,usb-isp1760",
- },
- {
- .compatible = "nxp,usb-isp1761",
- },
- { },
-};
-MODULE_DEVICE_TABLE(of, of_isp1760_match);
-
-static struct platform_driver isp1760_of_driver = {
- .driver = {
- .name = "nxp-isp1760",
- .of_match_table = of_isp1760_match,
- },
- .probe = of_isp1760_probe,
- .remove = of_isp1760_remove,
-};
-#endif
-
-#ifdef CONFIG_PCI
-static int isp1761_pci_probe(struct pci_dev *dev,
- const struct pci_device_id *id)
-{
- u8 latency, limit;
- __u32 reg_data;
- int retry_count;
- struct usb_hcd *hcd;
- unsigned int devflags = 0;
- int ret_status = 0;
-
- resource_size_t pci_mem_phy0;
- resource_size_t memlength;
-
- u8 __iomem *chip_addr;
- u8 __iomem *iobase;
- resource_size_t nxp_pci_io_base;
- resource_size_t iolength;
-
- if (usb_disabled())
- return -ENODEV;
-
- if (pci_enable_device(dev) < 0)
- return -ENODEV;
-
- if (!dev->irq)
- return -ENODEV;
-
- /* Grab the PLX PCI mem maped port start address we need */
- nxp_pci_io_base = pci_resource_start(dev, 0);
- iolength = pci_resource_len(dev, 0);
-
- if (!request_mem_region(nxp_pci_io_base, iolength, "ISP1761 IO MEM")) {
- printk(KERN_ERR "request region #1\n");
- return -EBUSY;
- }
-
- iobase = ioremap_nocache(nxp_pci_io_base, iolength);
- if (!iobase) {
- printk(KERN_ERR "ioremap #1\n");
- ret_status = -ENOMEM;
- goto cleanup1;
- }
- /* Grab the PLX PCI shared memory of the ISP 1761 we need */
- pci_mem_phy0 = pci_resource_start(dev, 3);
- memlength = pci_resource_len(dev, 3);
- if (memlength < 0xffff) {
- printk(KERN_ERR "memory length for this resource is wrong\n");
- ret_status = -ENOMEM;
- goto cleanup2;
- }
-
- if (!request_mem_region(pci_mem_phy0, memlength, "ISP-PCI")) {
- printk(KERN_ERR "host controller already in use\n");
- ret_status = -EBUSY;
- goto cleanup2;
- }
-
- /* map available memory */
- chip_addr = ioremap_nocache(pci_mem_phy0,memlength);
- if (!chip_addr) {
- printk(KERN_ERR "Error ioremap failed\n");
- ret_status = -ENOMEM;
- goto cleanup3;
- }
-
- /* bad pci latencies can contribute to overruns */
- pci_read_config_byte(dev, PCI_LATENCY_TIMER, &latency);
- if (latency) {
- pci_read_config_byte(dev, PCI_MAX_LAT, &limit);
- if (limit && limit < latency)
- pci_write_config_byte(dev, PCI_LATENCY_TIMER, limit);
- }
-
- /* Try to check whether we can access Scratch Register of
- * Host Controller or not. The initial PCI access is retried until
- * local init for the PCI bridge is completed
- */
- retry_count = 20;
- reg_data = 0;
- while ((reg_data != 0xFACE) && retry_count) {
- /*by default host is in 16bit mode, so
- * io operations at this stage must be 16 bit
- * */
- writel(0xface, chip_addr + HC_SCRATCH_REG);
- udelay(100);
- reg_data = readl(chip_addr + HC_SCRATCH_REG) & 0x0000ffff;
- retry_count--;
- }
-
- iounmap(chip_addr);
-
- /* Host Controller presence is detected by writing to scratch register
- * and reading back and checking the contents are same or not
- */
- if (reg_data != 0xFACE) {
- dev_err(&dev->dev, "scratch register mismatch %x\n", reg_data);
- ret_status = -ENOMEM;
- goto cleanup3;
- }
-
- pci_set_master(dev);
-
- /* configure PLX PCI chip to pass interrupts */
-#define PLX_INT_CSR_REG 0x68
- reg_data = readl(iobase + PLX_INT_CSR_REG);
- reg_data |= 0x900;
- writel(reg_data, iobase + PLX_INT_CSR_REG);
-
- dev->dev.dma_mask = NULL;
- hcd = isp1760_register(pci_mem_phy0, memlength, dev->irq,
- IRQF_SHARED, -ENOENT, &dev->dev, dev_name(&dev->dev),
- devflags);
- if (IS_ERR(hcd)) {
- ret_status = -ENODEV;
- goto cleanup3;
- }
-
- /* done with PLX IO access */
- iounmap(iobase);
- release_mem_region(nxp_pci_io_base, iolength);
-
- pci_set_drvdata(dev, hcd);
- return 0;
-
-cleanup3:
- release_mem_region(pci_mem_phy0, memlength);
-cleanup2:
- iounmap(iobase);
-cleanup1:
- release_mem_region(nxp_pci_io_base, iolength);
- return ret_status;
-}
-
-static void isp1761_pci_remove(struct pci_dev *dev)
-{
- struct usb_hcd *hcd;
-
- hcd = pci_get_drvdata(dev);
-
- usb_remove_hcd(hcd);
- iounmap(hcd->regs);
- release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
- usb_put_hcd(hcd);
-
- pci_disable_device(dev);
-}
-
-static void isp1761_pci_shutdown(struct pci_dev *dev)
-{
- printk(KERN_ERR "ips1761_pci_shutdown\n");
-}
-
-static const struct pci_device_id isp1760_plx [] = {
- {
- .class = PCI_CLASS_BRIDGE_OTHER << 8,
- .class_mask = ~0,
- .vendor = PCI_VENDOR_ID_PLX,
- .device = 0x5406,
- .subvendor = PCI_VENDOR_ID_PLX,
- .subdevice = 0x9054,
- },
- { }
-};
-MODULE_DEVICE_TABLE(pci, isp1760_plx);
-
-static struct pci_driver isp1761_pci_driver = {
- .name = "isp1760",
- .id_table = isp1760_plx,
- .probe = isp1761_pci_probe,
- .remove = isp1761_pci_remove,
- .shutdown = isp1761_pci_shutdown,
-};
-#endif
-
-static int isp1760_plat_probe(struct platform_device *pdev)
-{
- int ret = 0;
- struct usb_hcd *hcd;
- struct resource *mem_res;
- struct resource *irq_res;
- resource_size_t mem_size;
- struct isp1760_platform_data *priv = dev_get_platdata(&pdev->dev);
- unsigned int devflags = 0;
- unsigned long irqflags = IRQF_SHARED;
-
- mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!mem_res) {
- pr_warning("isp1760: Memory resource not available\n");
- ret = -ENODEV;
- goto out;
- }
- mem_size = resource_size(mem_res);
- if (!request_mem_region(mem_res->start, mem_size, "isp1760")) {
- pr_warning("isp1760: Cannot reserve the memory resource\n");
- ret = -EBUSY;
- goto out;
- }
-
- irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (!irq_res) {
- pr_warning("isp1760: IRQ resource not available\n");
- ret = -ENODEV;
- goto cleanup;
- }
-
- irqflags |= irq_res->flags & IRQF_TRIGGER_MASK;
-
- if (priv) {
- if (priv->is_isp1761)
- devflags |= ISP1760_FLAG_ISP1761;
- if (priv->bus_width_16)
- devflags |= ISP1760_FLAG_BUS_WIDTH_16;
- if (priv->port1_otg)
- devflags |= ISP1760_FLAG_OTG_EN;
- if (priv->analog_oc)
- devflags |= ISP1760_FLAG_ANALOG_OC;
- if (priv->dack_polarity_high)
- devflags |= ISP1760_FLAG_DACK_POL_HIGH;
- if (priv->dreq_polarity_high)
- devflags |= ISP1760_FLAG_DREQ_POL_HIGH;
- }
-
- hcd = isp1760_register(mem_res->start, mem_size, irq_res->start,
- irqflags, -ENOENT,
- &pdev->dev, dev_name(&pdev->dev), devflags);
-
- platform_set_drvdata(pdev, hcd);
-
- if (IS_ERR(hcd)) {
- pr_warning("isp1760: Failed to register the HCD device\n");
- ret = -ENODEV;
- goto cleanup;
- }
-
- pr_info("ISP1760 USB device initialised\n");
- return ret;
-
-cleanup:
- release_mem_region(mem_res->start, mem_size);
-out:
- return ret;
-}
-
-static int isp1760_plat_remove(struct platform_device *pdev)
-{
- struct resource *mem_res;
- resource_size_t mem_size;
- struct usb_hcd *hcd = platform_get_drvdata(pdev);
-
- usb_remove_hcd(hcd);
-
- mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- mem_size = resource_size(mem_res);
- release_mem_region(mem_res->start, mem_size);
-
- usb_put_hcd(hcd);
-
- return 0;
-}
-
-static struct platform_driver isp1760_plat_driver = {
- .probe = isp1760_plat_probe,
- .remove = isp1760_plat_remove,
- .driver = {
- .name = "isp1760",
- },
-};
-
-static int __init isp1760_init(void)
-{
- int ret, any_ret = -ENODEV;
-
- init_kmem_once();
-
- ret = platform_driver_register(&isp1760_plat_driver);
- if (!ret)
- any_ret = 0;
-#if defined(CONFIG_OF) && defined(CONFIG_OF_IRQ)
- ret = platform_driver_register(&isp1760_of_driver);
- if (!ret)
- any_ret = 0;
-#endif
-#ifdef CONFIG_PCI
- ret = pci_register_driver(&isp1761_pci_driver);
- if (!ret)
- any_ret = 0;
-#endif
-
- if (any_ret)
- deinit_kmem_cache();
- return any_ret;
-}
-module_init(isp1760_init);
-
-static void __exit isp1760_exit(void)
-{
- platform_driver_unregister(&isp1760_plat_driver);
-#if defined(CONFIG_OF) && defined(CONFIG_OF_IRQ)
- platform_driver_unregister(&isp1760_of_driver);
-#endif
-#ifdef CONFIG_PCI
- pci_unregister_driver(&isp1761_pci_driver);
-#endif
- deinit_kmem_cache();
-}
-module_exit(isp1760_exit);
diff --git a/drivers/usb/host/max3421-hcd.c b/drivers/usb/host/max3421-hcd.c
index 6234c75da33f..a98833cbfcf3 100644
--- a/drivers/usb/host/max3421-hcd.c
+++ b/drivers/usb/host/max3421-hcd.c
@@ -55,6 +55,7 @@
* single thread (max3421_spi_thread).
*/
+#include <linux/jiffies.h>
#include <linux/module.h>
#include <linux/spi/spi.h>
#include <linux/usb.h>
@@ -1291,7 +1292,7 @@ max3421_handle_irqs(struct usb_hcd *hcd)
char sbuf[16 * 16], *dp, *end;
int i;
- if (jiffies - last_time > 5*HZ) {
+ if (time_after(jiffies, last_time + 5*HZ)) {
dp = sbuf;
end = sbuf + sizeof(sbuf);
*dp = '\0';
@@ -1660,7 +1661,8 @@ hub_descriptor(struct usb_hub_descriptor *desc)
*/
desc->bDescriptorType = 0x29; /* hub descriptor */
desc->bDescLength = 9;
- desc->wHubCharacteristics = cpu_to_le16(0x0001);
+ desc->wHubCharacteristics = cpu_to_le16(HUB_CHAR_INDV_PORT_LPSM |
+ HUB_CHAR_COMMON_OCPM);
desc->bNbrPorts = 1;
}
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index dc9e4e61f1c8..7cce85a1f7dc 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -33,7 +33,17 @@
for ((index) = 0; (index) < AT91_MAX_USBH_PORTS; (index)++)
/* interface, function and usb clocks; sometimes also an AHB clock */
-static struct clk *iclk, *fclk, *uclk, *hclk;
+#define hcd_to_ohci_at91_priv(h) \
+ ((struct ohci_at91_priv *)hcd_to_ohci(h)->priv)
+
+struct ohci_at91_priv {
+ struct clk *iclk;
+ struct clk *fclk;
+ struct clk *uclk;
+ struct clk *hclk;
+ bool clocked;
+ bool wakeup; /* Saved wake-up state for resume */
+};
/* interface and function clocks; sometimes also an AHB clock */
#define DRIVER_DESC "OHCI Atmel driver"
@@ -41,45 +51,53 @@ static struct clk *iclk, *fclk, *uclk, *hclk;
static const char hcd_name[] = "ohci-atmel";
static struct hc_driver __read_mostly ohci_at91_hc_driver;
-static int clocked;
+
+static const struct ohci_driver_overrides ohci_at91_drv_overrides __initconst = {
+ .extra_priv_size = sizeof(struct ohci_at91_priv),
+};
extern int usb_disabled(void);
/*-------------------------------------------------------------------------*/
-static void at91_start_clock(void)
+static void at91_start_clock(struct ohci_at91_priv *ohci_at91)
{
+ if (ohci_at91->clocked)
+ return;
if (IS_ENABLED(CONFIG_COMMON_CLK)) {
- clk_set_rate(uclk, 48000000);
- clk_prepare_enable(uclk);
+ clk_set_rate(ohci_at91->uclk, 48000000);
+ clk_prepare_enable(ohci_at91->uclk);
}
- clk_prepare_enable(hclk);
- clk_prepare_enable(iclk);
- clk_prepare_enable(fclk);
- clocked = 1;
+ clk_prepare_enable(ohci_at91->hclk);
+ clk_prepare_enable(ohci_at91->iclk);
+ clk_prepare_enable(ohci_at91->fclk);
+ ohci_at91->clocked = true;
}
-static void at91_stop_clock(void)
+static void at91_stop_clock(struct ohci_at91_priv *ohci_at91)
{
- clk_disable_unprepare(fclk);
- clk_disable_unprepare(iclk);
- clk_disable_unprepare(hclk);
+ if (!ohci_at91->clocked)
+ return;
+ clk_disable_unprepare(ohci_at91->fclk);
+ clk_disable_unprepare(ohci_at91->iclk);
+ clk_disable_unprepare(ohci_at91->hclk);
if (IS_ENABLED(CONFIG_COMMON_CLK))
- clk_disable_unprepare(uclk);
- clocked = 0;
+ clk_disable_unprepare(ohci_at91->uclk);
+ ohci_at91->clocked = false;
}
static void at91_start_hc(struct platform_device *pdev)
{
struct usb_hcd *hcd = platform_get_drvdata(pdev);
struct ohci_regs __iomem *regs = hcd->regs;
+ struct ohci_at91_priv *ohci_at91 = hcd_to_ohci_at91_priv(hcd);
dev_dbg(&pdev->dev, "start\n");
/*
* Start the USB clocks.
*/
- at91_start_clock();
+ at91_start_clock(ohci_at91);
/*
* The USB host controller must remain in reset.
@@ -91,6 +109,7 @@ static void at91_stop_hc(struct platform_device *pdev)
{
struct usb_hcd *hcd = platform_get_drvdata(pdev);
struct ohci_regs __iomem *regs = hcd->regs;
+ struct ohci_at91_priv *ohci_at91 = hcd_to_ohci_at91_priv(hcd);
dev_dbg(&pdev->dev, "stop\n");
@@ -102,7 +121,7 @@ static void at91_stop_hc(struct platform_device *pdev)
/*
* Stop the USB clocks.
*/
- at91_stop_clock();
+ at91_stop_clock(ohci_at91);
}
@@ -128,7 +147,8 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver,
struct at91_usbh_data *board;
struct ohci_hcd *ohci;
int retval;
- struct usb_hcd *hcd = NULL;
+ struct usb_hcd *hcd;
+ struct ohci_at91_priv *ohci_at91;
struct device *dev = &pdev->dev;
struct resource *res;
int irq;
@@ -142,6 +162,7 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver,
hcd = usb_create_hcd(driver, dev, "at91");
if (!hcd)
return -ENOMEM;
+ ohci_at91 = hcd_to_ohci_at91_priv(hcd);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
hcd->regs = devm_ioremap_resource(dev, res);
@@ -152,29 +173,29 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver,
hcd->rsrc_start = res->start;
hcd->rsrc_len = resource_size(res);
- iclk = devm_clk_get(dev, "ohci_clk");
- if (IS_ERR(iclk)) {
+ ohci_at91->iclk = devm_clk_get(dev, "ohci_clk");
+ if (IS_ERR(ohci_at91->iclk)) {
dev_err(dev, "failed to get ohci_clk\n");
- retval = PTR_ERR(iclk);
+ retval = PTR_ERR(ohci_at91->iclk);
goto err;
}
- fclk = devm_clk_get(dev, "uhpck");
- if (IS_ERR(fclk)) {
+ ohci_at91->fclk = devm_clk_get(dev, "uhpck");
+ if (IS_ERR(ohci_at91->fclk)) {
dev_err(dev, "failed to get uhpck\n");
- retval = PTR_ERR(fclk);
+ retval = PTR_ERR(ohci_at91->fclk);
goto err;
}
- hclk = devm_clk_get(dev, "hclk");
- if (IS_ERR(hclk)) {
+ ohci_at91->hclk = devm_clk_get(dev, "hclk");
+ if (IS_ERR(ohci_at91->hclk)) {
dev_err(dev, "failed to get hclk\n");
- retval = PTR_ERR(hclk);
+ retval = PTR_ERR(ohci_at91->hclk);
goto err;
}
if (IS_ENABLED(CONFIG_COMMON_CLK)) {
- uclk = devm_clk_get(dev, "usb_clk");
- if (IS_ERR(uclk)) {
+ ohci_at91->uclk = devm_clk_get(dev, "usb_clk");
+ if (IS_ERR(ohci_at91->uclk)) {
dev_err(dev, "failed to get uclk\n");
- retval = PTR_ERR(uclk);
+ retval = PTR_ERR(ohci_at91->uclk);
goto err;
}
}
@@ -347,11 +368,13 @@ static int ohci_at91_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
*/
desc->wHubCharacteristics &= ~cpu_to_le16(HUB_CHAR_LPSM);
- desc->wHubCharacteristics |= cpu_to_le16(0x0001);
+ desc->wHubCharacteristics |=
+ cpu_to_le16(HUB_CHAR_INDV_PORT_LPSM);
if (pdata->overcurrent_supported) {
desc->wHubCharacteristics &= ~cpu_to_le16(HUB_CHAR_OCPM);
- desc->wHubCharacteristics |= cpu_to_le16(0x0008|0x0001);
+ desc->wHubCharacteristics |=
+ cpu_to_le16(HUB_CHAR_INDV_PORT_OCPM);
}
dev_dbg(hcd->self.controller, "wHubCharacteristics after 0x%04x\n",
@@ -593,19 +616,27 @@ static int ohci_hcd_at91_drv_remove(struct platform_device *pdev)
#ifdef CONFIG_PM
static int
-ohci_hcd_at91_drv_suspend(struct platform_device *pdev, pm_message_t mesg)
+ohci_hcd_at91_drv_suspend(struct device *dev)
{
- struct usb_hcd *hcd = platform_get_drvdata(pdev);
+ struct usb_hcd *hcd = dev_get_drvdata(dev);
struct ohci_hcd *ohci = hcd_to_ohci(hcd);
- bool do_wakeup = device_may_wakeup(&pdev->dev);
+ struct ohci_at91_priv *ohci_at91 = hcd_to_ohci_at91_priv(hcd);
int ret;
- if (do_wakeup)
+ /*
+ * Disable wakeup if we are going to sleep with slow clock mode
+ * enabled.
+ */
+ ohci_at91->wakeup = device_may_wakeup(dev)
+ && !at91_suspend_entering_slow_clock();
+
+ if (ohci_at91->wakeup)
enable_irq_wake(hcd->irq);
- ret = ohci_suspend(hcd, do_wakeup);
+ ret = ohci_suspend(hcd, ohci_at91->wakeup);
if (ret) {
- disable_irq_wake(hcd->irq);
+ if (ohci_at91->wakeup)
+ disable_irq_wake(hcd->irq);
return ret;
}
/*
@@ -615,7 +646,7 @@ ohci_hcd_at91_drv_suspend(struct platform_device *pdev, pm_message_t mesg)
*
* REVISIT: some boards will be able to turn VBUS off...
*/
- if (at91_suspend_entering_slow_clock()) {
+ if (!ohci_at91->wakeup) {
ohci->hc_control = ohci_readl(ohci, &ohci->regs->control);
ohci->hc_control &= OHCI_CTRL_RWC;
ohci_writel(ohci, ohci->hc_control, &ohci->regs->control);
@@ -623,38 +654,37 @@ ohci_hcd_at91_drv_suspend(struct platform_device *pdev, pm_message_t mesg)
/* flush the writes */
(void) ohci_readl (ohci, &ohci->regs->control);
- at91_stop_clock();
+ at91_stop_clock(ohci_at91);
}
return ret;
}
-static int ohci_hcd_at91_drv_resume(struct platform_device *pdev)
+static int ohci_hcd_at91_drv_resume(struct device *dev)
{
- struct usb_hcd *hcd = platform_get_drvdata(pdev);
+ struct usb_hcd *hcd = dev_get_drvdata(dev);
+ struct ohci_at91_priv *ohci_at91 = hcd_to_ohci_at91_priv(hcd);
- if (device_may_wakeup(&pdev->dev))
+ if (ohci_at91->wakeup)
disable_irq_wake(hcd->irq);
- if (!clocked)
- at91_start_clock();
+ at91_start_clock(ohci_at91);
ohci_resume(hcd, false);
return 0;
}
-#else
-#define ohci_hcd_at91_drv_suspend NULL
-#define ohci_hcd_at91_drv_resume NULL
#endif
+static SIMPLE_DEV_PM_OPS(ohci_hcd_at91_pm_ops, ohci_hcd_at91_drv_suspend,
+ ohci_hcd_at91_drv_resume);
+
static struct platform_driver ohci_hcd_at91_driver = {
.probe = ohci_hcd_at91_drv_probe,
.remove = ohci_hcd_at91_drv_remove,
.shutdown = usb_hcd_platform_shutdown,
- .suspend = ohci_hcd_at91_drv_suspend,
- .resume = ohci_hcd_at91_drv_resume,
.driver = {
.name = "at91_ohci",
+ .pm = &ohci_hcd_at91_pm_ops,
.of_match_table = of_match_ptr(at91_ohci_dt_ids),
},
};
@@ -665,7 +695,7 @@ static int __init ohci_at91_init(void)
return -ENODEV;
pr_info("%s: " DRIVER_DESC "\n", hcd_name);
- ohci_init_driver(&ohci_at91_hc_driver, NULL);
+ ohci_init_driver(&ohci_at91_hc_driver, &ohci_at91_drv_overrides);
/*
* The Atmel HW has some unusual quirks, which require Atmel-specific
diff --git a/drivers/usb/host/ohci-da8xx.c b/drivers/usb/host/ohci-da8xx.c
index 1c76999b2184..e5c33bc98ea4 100644
--- a/drivers/usb/host/ohci-da8xx.c
+++ b/drivers/usb/host/ohci-da8xx.c
@@ -431,7 +431,6 @@ static struct platform_driver ohci_hcd_da8xx_driver = {
.resume = ohci_da8xx_resume,
#endif
.driver = {
- .owner = THIS_MODULE,
.name = "ohci",
},
};
diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c
index 0aa17c937115..fe2aedd8a54d 100644
--- a/drivers/usb/host/ohci-hub.c
+++ b/drivers/usb/host/ohci-hub.c
@@ -544,15 +544,15 @@ ohci_hub_descriptor (
temp = 1 + (ohci->num_ports / 8);
desc->bDescLength = 7 + 2 * temp;
- temp = 0;
+ temp = HUB_CHAR_COMMON_LPSM | HUB_CHAR_COMMON_OCPM;
if (rh & RH_A_NPS) /* no power switching? */
- temp |= 0x0002;
+ temp |= HUB_CHAR_NO_LPSM;
if (rh & RH_A_PSM) /* per-port power switching? */
- temp |= 0x0001;
+ temp |= HUB_CHAR_INDV_PORT_LPSM;
if (rh & RH_A_NOCP) /* no overcurrent reporting? */
- temp |= 0x0010;
+ temp |= HUB_CHAR_NO_OCPM;
else if (rh & RH_A_OCPM) /* per-port overcurrent reporting? */
- temp |= 0x0008;
+ temp |= HUB_CHAR_INDV_PORT_OCPM;
desc->wHubCharacteristics = cpu_to_le16(temp);
/* ports removable, and usb 1.0 legacy PortPwrCtrlMask */
diff --git a/drivers/usb/host/ohci-jz4740.c b/drivers/usb/host/ohci-jz4740.c
index 8ddd8f5470cb..4db78f169256 100644
--- a/drivers/usb/host/ohci-jz4740.c
+++ b/drivers/usb/host/ohci-jz4740.c
@@ -239,7 +239,6 @@ static struct platform_driver ohci_hcd_jz4740_driver = {
.remove = jz4740_ohci_remove,
.driver = {
.name = "jz4740-ohci",
- .owner = THIS_MODULE,
},
};
diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c
index b81d202b15a2..185ceee52d47 100644
--- a/drivers/usb/host/ohci-platform.c
+++ b/drivers/usb/host/ohci-platform.c
@@ -38,7 +38,8 @@
struct ohci_platform_priv {
struct clk *clks[OHCI_MAX_CLKS];
struct reset_control *rst;
- struct phy *phy;
+ struct phy **phys;
+ int num_phys;
};
static const char hcd_name[] = "ohci-platform";
@@ -47,7 +48,7 @@ static int ohci_platform_power_on(struct platform_device *dev)
{
struct usb_hcd *hcd = platform_get_drvdata(dev);
struct ohci_platform_priv *priv = hcd_to_ohci_priv(hcd);
- int clk, ret;
+ int clk, ret, phy_num;
for (clk = 0; clk < OHCI_MAX_CLKS && priv->clks[clk]; clk++) {
ret = clk_prepare_enable(priv->clks[clk]);
@@ -55,20 +56,28 @@ static int ohci_platform_power_on(struct platform_device *dev)
goto err_disable_clks;
}
- if (priv->phy) {
- ret = phy_init(priv->phy);
- if (ret)
- goto err_disable_clks;
-
- ret = phy_power_on(priv->phy);
- if (ret)
- goto err_exit_phy;
+ for (phy_num = 0; phy_num < priv->num_phys; phy_num++) {
+ if (priv->phys[phy_num]) {
+ ret = phy_init(priv->phys[phy_num]);
+ if (ret)
+ goto err_exit_phy;
+ ret = phy_power_on(priv->phys[phy_num]);
+ if (ret) {
+ phy_exit(priv->phys[phy_num]);
+ goto err_exit_phy;
+ }
+ }
}
return 0;
err_exit_phy:
- phy_exit(priv->phy);
+ while (--phy_num >= 0) {
+ if (priv->phys[phy_num]) {
+ phy_power_off(priv->phys[phy_num]);
+ phy_exit(priv->phys[phy_num]);
+ }
+ }
err_disable_clks:
while (--clk >= 0)
clk_disable_unprepare(priv->clks[clk]);
@@ -80,11 +89,13 @@ static void ohci_platform_power_off(struct platform_device *dev)
{
struct usb_hcd *hcd = platform_get_drvdata(dev);
struct ohci_platform_priv *priv = hcd_to_ohci_priv(hcd);
- int clk;
+ int clk, phy_num;
- if (priv->phy) {
- phy_power_off(priv->phy);
- phy_exit(priv->phy);
+ for (phy_num = 0; phy_num < priv->num_phys; phy_num++) {
+ if (priv->phys[phy_num]) {
+ phy_power_off(priv->phys[phy_num]);
+ phy_exit(priv->phys[phy_num]);
+ }
}
for (clk = OHCI_MAX_CLKS - 1; clk >= 0; clk--)
@@ -112,7 +123,8 @@ static int ohci_platform_probe(struct platform_device *dev)
struct usb_ohci_pdata *pdata = dev_get_platdata(&dev->dev);
struct ohci_platform_priv *priv;
struct ohci_hcd *ohci;
- int err, irq, clk = 0;
+ const char *phy_name;
+ int err, irq, phy_num, clk = 0;
if (usb_disabled())
return -ENODEV;
@@ -160,12 +172,38 @@ static int ohci_platform_probe(struct platform_device *dev)
of_property_read_u32(dev->dev.of_node, "num-ports",
&ohci->num_ports);
- priv->phy = devm_phy_get(&dev->dev, "usb");
- if (IS_ERR(priv->phy)) {
- err = PTR_ERR(priv->phy);
- if (err == -EPROBE_DEFER)
- goto err_put_hcd;
- priv->phy = NULL;
+ priv->num_phys = of_count_phandle_with_args(dev->dev.of_node,
+ "phys", "#phy-cells");
+ priv->num_phys = priv->num_phys > 0 ? priv->num_phys : 1;
+
+ priv->phys = devm_kcalloc(&dev->dev, priv->num_phys,
+ sizeof(struct phy *), GFP_KERNEL);
+ if (!priv->phys)
+ return -ENOMEM;
+
+ for (phy_num = 0; phy_num < priv->num_phys; phy_num++) {
+ err = of_property_read_string_index(
+ dev->dev.of_node,
+ "phy-names", phy_num,
+ &phy_name);
+
+ if (err < 0) {
+ if (priv->num_phys > 1) {
+ dev_err(&dev->dev, "phy-names not provided");
+ goto err_put_hcd;
+ } else
+ phy_name = "usb";
+ }
+
+ priv->phys[phy_num] = devm_phy_get(&dev->dev,
+ phy_name);
+ if (IS_ERR(priv->phys[phy_num])) {
+ err = PTR_ERR(priv->phys[phy_num]);
+ if ((priv->num_phys > 1) ||
+ (err == -EPROBE_DEFER))
+ goto err_put_hcd;
+ priv->phys[phy_num] = NULL;
+ }
}
for (clk = 0; clk < OHCI_MAX_CLKS; clk++) {
@@ -328,6 +366,7 @@ static int ohci_platform_resume(struct device *dev)
static const struct of_device_id ohci_platform_ids[] = {
{ .compatible = "generic-ohci", },
+ { .compatible = "cavium,octeon-6335-ohci", },
{ }
};
MODULE_DEVICE_TABLE(of, ohci_platform_ids);
diff --git a/drivers/usb/host/ohci-ppc-of.c b/drivers/usb/host/ohci-ppc-of.c
index 965e3e9e688a..4f87a5c61b08 100644
--- a/drivers/usb/host/ohci-ppc-of.c
+++ b/drivers/usb/host/ohci-ppc-of.c
@@ -229,7 +229,6 @@ static struct platform_driver ohci_hcd_ppc_of_driver = {
.shutdown = usb_hcd_platform_shutdown,
.driver = {
.name = "ppc-of-ohci",
- .owner = THIS_MODULE,
.of_match_table = ohci_hcd_ppc_of_match,
},
};
diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c
index 095113ea1fcb..7a1919ca543a 100644
--- a/drivers/usb/host/ohci-s3c2410.c
+++ b/drivers/usb/host/ohci-s3c2410.c
@@ -249,14 +249,14 @@ static int ohci_s3c2410_hub_control(
*/
desc->wHubCharacteristics &= ~cpu_to_le16(HUB_CHAR_LPSM);
- desc->wHubCharacteristics |= cpu_to_le16(0x0001);
+ desc->wHubCharacteristics |= cpu_to_le16(
+ HUB_CHAR_INDV_PORT_LPSM);
if (info->enable_oc) {
desc->wHubCharacteristics &= ~cpu_to_le16(
HUB_CHAR_OCPM);
desc->wHubCharacteristics |= cpu_to_le16(
- 0x0008 |
- 0x0001);
+ HUB_CHAR_INDV_PORT_OCPM);
}
dev_dbg(hcd->self.controller, "wHubCharacteristics after 0x%04x\n",
diff --git a/drivers/usb/host/ohci-sm501.c b/drivers/usb/host/ohci-sm501.c
index 4e81c804c73e..a8b8d8b8d9f3 100644
--- a/drivers/usb/host/ohci-sm501.c
+++ b/drivers/usb/host/ohci-sm501.c
@@ -265,7 +265,6 @@ static struct platform_driver ohci_hcd_sm501_driver = {
.suspend = ohci_sm501_suspend,
.resume = ohci_sm501_resume,
.driver = {
- .owner = THIS_MODULE,
.name = "sm501-usb",
},
};
diff --git a/drivers/usb/host/ohci-tilegx.c b/drivers/usb/host/ohci-tilegx.c
index bef6dfb0405a..e1b208da460a 100644
--- a/drivers/usb/host/ohci-tilegx.c
+++ b/drivers/usb/host/ohci-tilegx.c
@@ -199,7 +199,6 @@ static struct platform_driver ohci_hcd_tilegx_driver = {
.shutdown = ohci_hcd_tilegx_drv_shutdown,
.driver = {
.name = "tilegx-ohci",
- .owner = THIS_MODULE,
}
};
diff --git a/drivers/usb/host/ohci-tmio.c b/drivers/usb/host/ohci-tmio.c
index bb409588d39c..e9a6eec39142 100644
--- a/drivers/usb/host/ohci-tmio.c
+++ b/drivers/usb/host/ohci-tmio.c
@@ -368,6 +368,5 @@ static struct platform_driver ohci_hcd_tmio_driver = {
.resume = ohci_hcd_tmio_drv_resume,
.driver = {
.name = "tmio-ohci",
- .owner = THIS_MODULE,
},
};
diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c
index 036924e640f5..ef7efb278b15 100644
--- a/drivers/usb/host/oxu210hp-hcd.c
+++ b/drivers/usb/host/oxu210hp-hcd.c
@@ -457,11 +457,11 @@ static void ehci_hub_descriptor(struct oxu_hcd *oxu,
memset(&desc->u.hs.DeviceRemovable[0], 0, temp);
memset(&desc->u.hs.DeviceRemovable[temp], 0xff, temp);
- temp = 0x0008; /* per-port overcurrent reporting */
+ temp = HUB_CHAR_INDV_PORT_OCPM; /* per-port overcurrent reporting */
if (HCS_PPC(oxu->hcs_params))
- temp |= 0x0001; /* per-port power control */
+ temp |= HUB_CHAR_INDV_PORT_LPSM; /* per-port power control */
else
- temp |= 0x0002; /* no power switching */
+ temp |= HUB_CHAR_NO_LPSM; /* no power switching */
desc->wHubCharacteristics = (__force __u16)cpu_to_le16(temp);
}
@@ -2598,9 +2598,7 @@ static int oxu_hcd_init(struct usb_hcd *hcd)
spin_lock_init(&oxu->lock);
- init_timer(&oxu->watchdog);
- oxu->watchdog.function = oxu_watchdog;
- oxu->watchdog.data = (unsigned long) oxu;
+ setup_timer(&oxu->watchdog, oxu_watchdog, (unsigned long)oxu);
/*
* hw default: 1K periodic list heads, one per frame.
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index ce636466edb7..f9400564cb72 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -603,9 +603,9 @@ static void quirk_usb_handoff_ohci(struct pci_dev *pdev)
msleep(10);
}
if (wait_time <= 0)
- dev_warn(&pdev->dev, "OHCI: BIOS handoff failed"
- " (BIOS bug?) %08x\n",
- readl(base + OHCI_CONTROL));
+ dev_warn(&pdev->dev,
+ "OHCI: BIOS handoff failed (BIOS bug?) %08x\n",
+ readl(base + OHCI_CONTROL));
}
#endif
@@ -733,8 +733,9 @@ static void ehci_bios_handoff(struct pci_dev *pdev,
* and hope nothing goes too wrong
*/
if (try_handoff)
- dev_warn(&pdev->dev, "EHCI: BIOS handoff failed"
- " (BIOS bug?) %08x\n", cap);
+ dev_warn(&pdev->dev,
+ "EHCI: BIOS handoff failed (BIOS bug?) %08x\n",
+ cap);
pci_write_config_byte(pdev, offset + 2, 0);
}
@@ -781,8 +782,9 @@ static void quirk_usb_disable_ehci(struct pci_dev *pdev)
case 0: /* Illegal reserved cap, set cap=0 so we exit */
cap = 0; /* then fallthrough... */
default:
- dev_warn(&pdev->dev, "EHCI: unrecognized capability "
- "%02x\n", cap & 0xff);
+ dev_warn(&pdev->dev,
+ "EHCI: unrecognized capability %02x\n",
+ cap & 0xff);
}
offset = (cap >> 8) & 0xff;
}
@@ -893,8 +895,7 @@ void usb_enable_intel_xhci_ports(struct pci_dev *xhci_pdev)
*/
if (!IS_ENABLED(CONFIG_USB_XHCI_HCD)) {
dev_warn(&xhci_pdev->dev,
- "CONFIG_USB_XHCI_HCD is turned off, "
- "defaulting to EHCI.\n");
+ "CONFIG_USB_XHCI_HCD is turned off, defaulting to EHCI.\n");
dev_warn(&xhci_pdev->dev,
"USB 3.0 devices will work at USB 2.0 speeds.\n");
usb_disable_xhci_ports(xhci_pdev);
@@ -919,8 +920,9 @@ void usb_enable_intel_xhci_ports(struct pci_dev *xhci_pdev)
pci_read_config_dword(xhci_pdev, USB_INTEL_USB3_PSSEN,
&ports_available);
- dev_dbg(&xhci_pdev->dev, "USB 3.0 ports that are now enabled "
- "under xHCI: 0x%x\n", ports_available);
+ dev_dbg(&xhci_pdev->dev,
+ "USB 3.0 ports that are now enabled under xHCI: 0x%x\n",
+ ports_available);
/* Read XUSB2PRM, xHCI USB 2.0 Port Routing Mask Register
* Indicate the USB 2.0 ports to be controlled by the xHCI host.
@@ -941,8 +943,9 @@ void usb_enable_intel_xhci_ports(struct pci_dev *xhci_pdev)
pci_read_config_dword(xhci_pdev, USB_INTEL_XUSB2PR,
&ports_available);
- dev_dbg(&xhci_pdev->dev, "USB 2.0 ports that are now switched over "
- "to xHCI: 0x%x\n", ports_available);
+ dev_dbg(&xhci_pdev->dev,
+ "USB 2.0 ports that are now switched over to xHCI: 0x%x\n",
+ ports_available);
}
EXPORT_SYMBOL_GPL(usb_enable_intel_xhci_ports);
@@ -1010,8 +1013,9 @@ static void quirk_usb_handoff_xhci(struct pci_dev *pdev)
/* Assume a buggy BIOS and take HC ownership anyway */
if (timeout) {
- dev_warn(&pdev->dev, "xHCI BIOS handoff failed"
- " (BIOS bug ?) %08x\n", val);
+ dev_warn(&pdev->dev,
+ "xHCI BIOS handoff failed (BIOS bug ?) %08x\n",
+ val);
writel(val & ~XHCI_HC_BIOS_OWNED, base + ext_cap_offset);
}
}
@@ -1039,8 +1043,8 @@ hc_init:
if (timeout) {
val = readl(op_reg_base + XHCI_STS_OFFSET);
dev_warn(&pdev->dev,
- "xHCI HW not ready after 5 sec (HC bug?) "
- "status = 0x%x\n", val);
+ "xHCI HW not ready after 5 sec (HC bug?) status = 0x%x\n",
+ val);
}
/* Send the halt and disable interrupts command */
@@ -1054,8 +1058,8 @@ hc_init:
if (timeout) {
val = readl(op_reg_base + XHCI_STS_OFFSET);
dev_warn(&pdev->dev,
- "xHCI HW did not halt within %d usec "
- "status = 0x%x\n", XHCI_MAX_HALT_USEC, val);
+ "xHCI HW did not halt within %d usec status = 0x%x\n",
+ XHCI_MAX_HALT_USEC, val);
}
iounmap(base);
@@ -1075,8 +1079,8 @@ static void quirk_usb_early_handoff(struct pci_dev *pdev)
return;
if (pci_enable_device(pdev) < 0) {
- dev_warn(&pdev->dev, "Can't enable PCI device, "
- "BIOS handoff failed.\n");
+ dev_warn(&pdev->dev,
+ "Can't enable PCI device, BIOS handoff failed.\n");
return;
}
if (pdev->class == PCI_CLASS_SERIAL_USB_UHCI)
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index c4bcfaedeec9..bdc82fea0a1f 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -2141,7 +2141,8 @@ static void r8a66597_hub_descriptor(struct r8a66597 *r8a66597,
desc->bNbrPorts = r8a66597->max_root_hub;
desc->bDescLength = 9;
desc->bPwrOn2PwrGood = 0;
- desc->wHubCharacteristics = cpu_to_le16(0x0011);
+ desc->wHubCharacteristics =
+ cpu_to_le16(HUB_CHAR_INDV_PORT_LPSM | HUB_CHAR_NO_OCPM);
desc->u.hs.DeviceRemovable[0] =
((1 << r8a66597->max_root_hub) - 1) << 1;
desc->u.hs.DeviceRemovable[1] = ~0;
@@ -2483,9 +2484,8 @@ static int r8a66597_probe(struct platform_device *pdev)
r8a66597->max_root_hub = 2;
spin_lock_init(&r8a66597->lock);
- init_timer(&r8a66597->rh_timer);
- r8a66597->rh_timer.function = r8a66597_timer;
- r8a66597->rh_timer.data = (unsigned long)r8a66597;
+ setup_timer(&r8a66597->rh_timer, r8a66597_timer,
+ (unsigned long)r8a66597);
r8a66597->reg = reg;
/* make sure no interrupts are pending */
@@ -2496,9 +2496,8 @@ static int r8a66597_probe(struct platform_device *pdev)
for (i = 0; i < R8A66597_MAX_NUM_PIPE; i++) {
INIT_LIST_HEAD(&r8a66597->pipe_queue[i]);
- init_timer(&r8a66597->td_timer[i]);
- r8a66597->td_timer[i].function = r8a66597_td_timer;
- r8a66597->td_timer[i].data = (unsigned long)r8a66597;
+ setup_timer(&r8a66597->td_timer[i], r8a66597_td_timer,
+ (unsigned long)r8a66597);
setup_timer(&r8a66597->interval_timer[i],
r8a66597_interval_timer,
(unsigned long)r8a66597);
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index 25fb1da8d3d7..4f4ba1ea9e9b 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -1103,12 +1103,12 @@ sl811h_hub_descriptor (
desc->bPwrOn2PwrGood = sl811->board->potpg;
if (!desc->bPwrOn2PwrGood)
desc->bPwrOn2PwrGood = 10;
- temp = 0x0001;
+ temp = HUB_CHAR_INDV_PORT_LPSM;
} else
- temp = 0x0002;
+ temp = HUB_CHAR_NO_LPSM;
/* no overcurrent errors detection/handling */
- temp |= 0x0010;
+ temp |= HUB_CHAR_NO_OCPM;
desc->wHubCharacteristics = cpu_to_le16(temp);
@@ -1691,9 +1691,7 @@ sl811h_probe(struct platform_device *dev)
spin_lock_init(&sl811->lock);
INIT_LIST_HEAD(&sl811->async);
sl811->board = dev_get_platdata(&dev->dev);
- init_timer(&sl811->timer);
- sl811->timer.function = sl811h_timer;
- sl811->timer.data = (unsigned long) sl811;
+ setup_timer(&sl811->timer, sl811h_timer, (unsigned long)sl811);
sl811->addr_reg = addr_reg;
sl811->data_reg = data_reg;
diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c
index 2894e54e5b9c..ad97e8a1ad1c 100644
--- a/drivers/usb/host/u132-hcd.c
+++ b/drivers/usb/host/u132-hcd.c
@@ -2590,15 +2590,15 @@ static int u132_roothub_descriptor(struct u132 *u132,
desc->bNbrPorts = u132->num_ports;
temp = 1 + (u132->num_ports / 8);
desc->bDescLength = 7 + 2 * temp;
- temp = 0;
+ temp = HUB_CHAR_COMMON_LPSM | HUB_CHAR_COMMON_OCPM;
if (rh_a & RH_A_NPS)
- temp |= 0x0002;
+ temp |= HUB_CHAR_NO_LPSM;
if (rh_a & RH_A_PSM)
- temp |= 0x0001;
+ temp |= HUB_CHAR_INDV_PORT_LPSM;
if (rh_a & RH_A_NOCP)
- temp |= 0x0010;
+ temp |= HUB_CHAR_NO_OCPM;
else if (rh_a & RH_A_OCPM)
- temp |= 0x0008;
+ temp |= HUB_CHAR_INDV_PORT_OCPM;
desc->wHubCharacteristics = cpu_to_le16(temp);
retval = u132_read_pcimem(u132, roothub.b, &rh_b);
if (retval)
diff --git a/drivers/usb/host/uhci-grlib.c b/drivers/usb/host/uhci-grlib.c
index 05f57ffdf9ab..0342991c9507 100644
--- a/drivers/usb/host/uhci-grlib.c
+++ b/drivers/usb/host/uhci-grlib.c
@@ -188,7 +188,6 @@ static struct platform_driver uhci_grlib_driver = {
.shutdown = uhci_hcd_grlib_shutdown,
.driver = {
.name = "grlib-uhci",
- .owner = THIS_MODULE,
.of_match_table = uhci_hcd_grlib_of_match,
},
};
diff --git a/drivers/usb/host/uhci-hub.c b/drivers/usb/host/uhci-hub.c
index 93e17b12fb33..19ba5eafb31e 100644
--- a/drivers/usb/host/uhci-hub.c
+++ b/drivers/usb/host/uhci-hub.c
@@ -17,8 +17,9 @@ static const __u8 root_hub_hub_des[] =
0x09, /* __u8 bLength; */
0x29, /* __u8 bDescriptorType; Hub-descriptor */
0x02, /* __u8 bNbrPorts; */
- 0x0a, /* __u16 wHubCharacteristics; */
- 0x00, /* (per-port OC, no power switching) */
+ HUB_CHAR_NO_LPSM | /* __u16 wHubCharacteristics; */
+ HUB_CHAR_INDV_PORT_OCPM, /* (per-port OC, no power switching) */
+ 0x00,
0x01, /* __u8 bPwrOn2pwrGood; 2ms */
0x00, /* __u8 bHubContrCurrent; 0 mA */
0x00, /* __u8 DeviceRemovable; *** 7 Ports max */
diff --git a/drivers/usb/host/uhci-platform.c b/drivers/usb/host/uhci-platform.c
index cf8f46003f62..3a3e3eeba291 100644
--- a/drivers/usb/host/uhci-platform.c
+++ b/drivers/usb/host/uhci-platform.c
@@ -147,7 +147,6 @@ static struct platform_driver uhci_platform_driver = {
.shutdown = uhci_hcd_platform_shutdown,
.driver = {
.name = "platform-uhci",
- .owner = THIS_MODULE,
.of_match_table = platform_uhci_ids,
},
};
diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c
index bb89175ca6e5..745717ec9c89 100644
--- a/drivers/usb/host/xhci-dbg.c
+++ b/drivers/usb/host/xhci-dbg.c
@@ -552,7 +552,7 @@ void xhci_dbg_ctx(struct xhci_hcd *xhci,
if (ctx->type == XHCI_CTX_TYPE_INPUT) {
struct xhci_input_control_ctx *ctrl_ctx =
- xhci_get_input_control_ctx(xhci, ctx);
+ xhci_get_input_control_ctx(ctx);
if (!ctrl_ctx) {
xhci_warn(xhci, "Could not get input context, bad type.\n");
return;
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 5cb3d7a10017..f8336408ef07 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -535,7 +535,7 @@ static void xhci_free_container_ctx(struct xhci_hcd *xhci,
kfree(ctx);
}
-struct xhci_input_control_ctx *xhci_get_input_control_ctx(struct xhci_hcd *xhci,
+struct xhci_input_control_ctx *xhci_get_input_control_ctx(
struct xhci_container_ctx *ctx)
{
if (ctx->type != XHCI_CTX_TYPE_INPUT)
@@ -784,8 +784,7 @@ void xhci_setup_streams_ep_input_ctx(struct xhci_hcd *xhci,
* Reinstalls the "normal" endpoint ring (at its previous dequeue mark,
* not at the beginning of the ring).
*/
-void xhci_setup_no_streams_ep_input_ctx(struct xhci_hcd *xhci,
- struct xhci_ep_ctx *ep_ctx,
+void xhci_setup_no_streams_ep_input_ctx(struct xhci_ep_ctx *ep_ctx,
struct xhci_virt_ep *ep)
{
dma_addr_t addr;
@@ -833,9 +832,8 @@ void xhci_free_stream_info(struct xhci_hcd *xhci,
static void xhci_init_endpoint_timer(struct xhci_hcd *xhci,
struct xhci_virt_ep *ep)
{
- init_timer(&ep->stop_cmd_timer);
- ep->stop_cmd_timer.data = (unsigned long) ep;
- ep->stop_cmd_timer.function = xhci_stop_endpoint_command_watchdog;
+ setup_timer(&ep->stop_cmd_timer, xhci_stop_endpoint_command_watchdog,
+ (unsigned long)ep);
ep->xhci = xhci;
}
@@ -1342,8 +1340,7 @@ static u32 xhci_get_endpoint_mult(struct usb_device *udev,
return ep->ss_ep_comp.bmAttributes;
}
-static u32 xhci_get_endpoint_type(struct usb_device *udev,
- struct usb_host_endpoint *ep)
+static u32 xhci_get_endpoint_type(struct usb_host_endpoint *ep)
{
int in;
u32 type;
@@ -1376,8 +1373,7 @@ static u32 xhci_get_endpoint_type(struct usb_device *udev,
* Basically, this is the maxpacket size, multiplied by the burst size
* and mult size.
*/
-static u32 xhci_get_max_esit_payload(struct xhci_hcd *xhci,
- struct usb_device *udev,
+static u32 xhci_get_max_esit_payload(struct usb_device *udev,
struct usb_host_endpoint *ep)
{
int max_burst;
@@ -1418,7 +1414,7 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
ep_index = xhci_get_endpoint_index(&ep->desc);
ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, ep_index);
- endpoint_type = xhci_get_endpoint_type(udev, ep);
+ endpoint_type = xhci_get_endpoint_type(ep);
if (!endpoint_type)
return -EINVAL;
ep_ctx->ep_info2 = cpu_to_le32(endpoint_type);
@@ -1484,7 +1480,7 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
}
ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet) |
MAX_BURST(max_burst));
- max_esit_payload = xhci_get_max_esit_payload(xhci, udev, ep);
+ max_esit_payload = xhci_get_max_esit_payload(udev, ep);
ep_ctx->tx_info = cpu_to_le32(MAX_ESIT_PAYLOAD_FOR_EP(max_esit_payload));
/*
@@ -1773,7 +1769,7 @@ struct xhci_command *xhci_alloc_command(struct xhci_hcd *xhci,
return command;
}
-void xhci_urb_free_priv(struct xhci_hcd *xhci, struct urb_priv *urb_priv)
+void xhci_urb_free_priv(struct urb_priv *urb_priv)
{
if (urb_priv) {
kfree(urb_priv->td[0]);
@@ -1926,7 +1922,7 @@ static int xhci_test_trb_in_td(struct xhci_hcd *xhci,
}
/* TRB math checks for xhci_trb_in_td(), using the command and event rings. */
-static int xhci_check_trb_in_td_math(struct xhci_hcd *xhci, gfp_t mem_flags)
+static int xhci_check_trb_in_td_math(struct xhci_hcd *xhci)
{
struct {
dma_addr_t input_dma;
@@ -2452,7 +2448,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
flags);
if (!xhci->event_ring)
goto fail;
- if (xhci_check_trb_in_td_math(xhci, flags) < 0)
+ if (xhci_check_trb_in_td_math(xhci) < 0)
goto fail;
xhci->erst.entries = dma_alloc_coherent(dev,
@@ -2509,9 +2505,8 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
xhci_print_ir_set(xhci, 0);
/* init command timeout timer */
- init_timer(&xhci->cmd_timer);
- xhci->cmd_timer.data = (unsigned long) xhci;
- xhci->cmd_timer.function = xhci_handle_command_timeout;
+ setup_timer(&xhci->cmd_timer, xhci_handle_command_timeout,
+ (unsigned long)xhci);
/*
* XXX: Might need to set the Interrupter Moderation Register to
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index e692e769c50c..88da8d629820 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -299,7 +299,7 @@ static int xhci_abort_cmd_ring(struct xhci_hcd *xhci)
* seconds), then it should assume that the there are
* larger problems with the xHC and assert HCRST.
*/
- ret = xhci_handshake(xhci, &xhci->op_regs->cmd_ring,
+ ret = xhci_handshake(&xhci->op_regs->cmd_ring,
CMD_RING_RUNNING, 0, 5 * 1000 * 1000);
if (ret < 0) {
xhci_err(xhci, "Stopped the command ring failed, "
@@ -609,7 +609,7 @@ static void xhci_giveback_urb_in_irq(struct xhci_hcd *xhci,
spin_unlock(&xhci->lock);
usb_hcd_giveback_urb(hcd, urb, status);
- xhci_urb_free_priv(xhci, urb_priv);
+ xhci_urb_free_priv(urb_priv);
spin_lock(&xhci->lock);
}
}
@@ -1110,7 +1110,7 @@ static void xhci_handle_cmd_config_ep(struct xhci_hcd *xhci, int slot_id,
* is not waiting on the configure endpoint command.
*/
virt_dev = xhci->devs[slot_id];
- ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx);
+ ctrl_ctx = xhci_get_input_control_ctx(virt_dev->in_ctx);
if (!ctrl_ctx) {
xhci_warn(xhci, "Could not get input context, bad type.\n");
return;
@@ -2354,8 +2354,8 @@ static int handle_tx_event(struct xhci_hcd *xhci,
status = 0;
break;
}
- xhci_warn(xhci, "ERROR Unknown event condition, HC probably "
- "busted\n");
+ xhci_warn(xhci, "ERROR Unknown event condition %u, HC probably busted\n",
+ trb_comp_code);
goto cleanup;
}
@@ -2497,7 +2497,7 @@ cleanup:
urb = td->urb;
urb_priv = urb->hcpriv;
- xhci_urb_free_priv(xhci, urb_priv);
+ xhci_urb_free_priv(urb_priv);
usb_hcd_unlink_urb_from_ep(bus_to_hcd(urb->dev->bus), urb);
if ((urb->actual_length != urb->transfer_buffer_length &&
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index c50d8d202618..ec8ac1674854 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -60,8 +60,7 @@ MODULE_PARM_DESC(quirks, "Bit flags for quirks to be enabled as default");
* handshake done). There are two failure modes: "usec" have passed (major
* hardware flakeout), or the register reads as all-ones (hardware removed).
*/
-int xhci_handshake(struct xhci_hcd *xhci, void __iomem *ptr,
- u32 mask, u32 done, int usec)
+int xhci_handshake(void __iomem *ptr, u32 mask, u32 done, int usec)
{
u32 result;
@@ -111,7 +110,7 @@ int xhci_halt(struct xhci_hcd *xhci)
xhci_dbg_trace(xhci, trace_xhci_dbg_init, "// Halt the HC");
xhci_quiesce(xhci);
- ret = xhci_handshake(xhci, &xhci->op_regs->status,
+ ret = xhci_handshake(&xhci->op_regs->status,
STS_HALT, STS_HALT, XHCI_MAX_HALT_USEC);
if (!ret) {
xhci->xhc_state |= XHCI_STATE_HALTED;
@@ -140,7 +139,7 @@ static int xhci_start(struct xhci_hcd *xhci)
* Wait for the HCHalted Status bit to be 0 to indicate the host is
* running.
*/
- ret = xhci_handshake(xhci, &xhci->op_regs->status,
+ ret = xhci_handshake(&xhci->op_regs->status,
STS_HALT, 0, XHCI_MAX_HALT_USEC);
if (ret == -ETIMEDOUT)
xhci_err(xhci, "Host took too long to start, "
@@ -175,7 +174,7 @@ int xhci_reset(struct xhci_hcd *xhci)
command |= CMD_RESET;
writel(command, &xhci->op_regs->command);
- ret = xhci_handshake(xhci, &xhci->op_regs->command,
+ ret = xhci_handshake(&xhci->op_regs->command,
CMD_RESET, 0, 10 * 1000 * 1000);
if (ret)
return ret;
@@ -186,7 +185,7 @@ int xhci_reset(struct xhci_hcd *xhci)
* xHCI cannot write to any doorbells or operational registers other
* than status until the "Controller Not Ready" flag is cleared.
*/
- ret = xhci_handshake(xhci, &xhci->op_regs->status,
+ ret = xhci_handshake(&xhci->op_regs->status,
STS_CNR, 0, 10 * 1000 * 1000);
for (i = 0; i < 2; ++i) {
@@ -473,10 +472,8 @@ static void compliance_mode_recovery(unsigned long arg)
static void compliance_mode_recovery_timer_init(struct xhci_hcd *xhci)
{
xhci->port_status_u0 = 0;
- init_timer(&xhci->comp_mode_recovery_timer);
-
- xhci->comp_mode_recovery_timer.data = (unsigned long) xhci;
- xhci->comp_mode_recovery_timer.function = compliance_mode_recovery;
+ setup_timer(&xhci->comp_mode_recovery_timer,
+ compliance_mode_recovery, (unsigned long)xhci);
xhci->comp_mode_recovery_timer.expires = jiffies +
msecs_to_jiffies(COMP_MODE_RCVRY_MSECS);
@@ -929,7 +926,7 @@ int xhci_suspend(struct xhci_hcd *xhci, bool do_wakeup)
/* Some chips from Fresco Logic need an extraordinary delay */
delay *= (xhci->quirks & XHCI_SLOW_SUSPEND) ? 10 : 1;
- if (xhci_handshake(xhci, &xhci->op_regs->status,
+ if (xhci_handshake(&xhci->op_regs->status,
STS_HALT, STS_HALT, delay)) {
xhci_warn(xhci, "WARN: xHC CMD_RUN timeout\n");
spin_unlock_irq(&xhci->lock);
@@ -944,7 +941,7 @@ int xhci_suspend(struct xhci_hcd *xhci, bool do_wakeup)
command = readl(&xhci->op_regs->command);
command |= CMD_CSS;
writel(command, &xhci->op_regs->command);
- if (xhci_handshake(xhci, &xhci->op_regs->status,
+ if (xhci_handshake(&xhci->op_regs->status,
STS_SAVE, 0, 10 * 1000)) {
xhci_warn(xhci, "WARN: xHC save state timeout\n");
spin_unlock_irq(&xhci->lock);
@@ -1011,7 +1008,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
command = readl(&xhci->op_regs->command);
command |= CMD_CRS;
writel(command, &xhci->op_regs->command);
- if (xhci_handshake(xhci, &xhci->op_regs->status,
+ if (xhci_handshake(&xhci->op_regs->status,
STS_RESTORE, 0, 10 * 1000)) {
xhci_warn(xhci, "WARN: xHC restore state timeout\n");
spin_unlock_irq(&xhci->lock);
@@ -1082,7 +1079,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
command = readl(&xhci->op_regs->command);
command |= CMD_RUN;
writel(command, &xhci->op_regs->command);
- xhci_handshake(xhci, &xhci->op_regs->status, STS_HALT,
+ xhci_handshake(&xhci->op_regs->status, STS_HALT,
0, 250 * 1000);
/* step 5: walk topology and initialize portsc,
@@ -1276,7 +1273,7 @@ static int xhci_check_maxpacket(struct xhci_hcd *xhci, unsigned int slot_id,
return -ENOMEM;
command->in_ctx = xhci->devs[slot_id]->in_ctx;
- ctrl_ctx = xhci_get_input_control_ctx(xhci, command->in_ctx);
+ ctrl_ctx = xhci_get_input_control_ctx(command->in_ctx);
if (!ctrl_ctx) {
xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
__func__);
@@ -1374,7 +1371,7 @@ int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags)
ret = xhci_check_maxpacket(xhci, slot_id,
ep_index, urb);
if (ret < 0) {
- xhci_urb_free_priv(xhci, urb_priv);
+ xhci_urb_free_priv(urb_priv);
urb->hcpriv = NULL;
return ret;
}
@@ -1440,7 +1437,7 @@ dying:
urb->ep->desc.bEndpointAddress, urb);
ret = -ESHUTDOWN;
free_priv:
- xhci_urb_free_priv(xhci, urb_priv);
+ xhci_urb_free_priv(urb_priv);
urb->hcpriv = NULL;
spin_unlock_irqrestore(&xhci->lock, flags);
return ret;
@@ -1553,7 +1550,7 @@ int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
usb_hcd_unlink_urb_from_ep(hcd, urb);
spin_unlock_irqrestore(&xhci->lock, flags);
usb_hcd_giveback_urb(hcd, urb, -ESHUTDOWN);
- xhci_urb_free_priv(xhci, urb_priv);
+ xhci_urb_free_priv(urb_priv);
return ret;
}
if ((xhci->xhc_state & XHCI_STATE_DYING) ||
@@ -1660,7 +1657,7 @@ int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
in_ctx = xhci->devs[udev->slot_id]->in_ctx;
out_ctx = xhci->devs[udev->slot_id]->out_ctx;
- ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx);
+ ctrl_ctx = xhci_get_input_control_ctx(in_ctx);
if (!ctrl_ctx) {
xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
__func__);
@@ -1676,8 +1673,10 @@ int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
cpu_to_le32(EP_STATE_DISABLED)) ||
le32_to_cpu(ctrl_ctx->drop_flags) &
xhci_get_endpoint_flag(&ep->desc)) {
- xhci_warn(xhci, "xHCI %s called with disabled ep %p\n",
- __func__, ep);
+ /* Do not warn when called after a usb_device_reset */
+ if (xhci->devs[udev->slot_id]->eps[ep_index].ring != NULL)
+ xhci_warn(xhci, "xHCI %s called with disabled ep %p\n",
+ __func__, ep);
return 0;
}
@@ -1714,7 +1713,7 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
struct usb_host_endpoint *ep)
{
struct xhci_hcd *xhci;
- struct xhci_container_ctx *in_ctx, *out_ctx;
+ struct xhci_container_ctx *in_ctx;
unsigned int ep_index;
struct xhci_input_control_ctx *ctrl_ctx;
u32 added_ctxs;
@@ -1745,8 +1744,7 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
virt_dev = xhci->devs[udev->slot_id];
in_ctx = virt_dev->in_ctx;
- out_ctx = virt_dev->out_ctx;
- ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx);
+ ctrl_ctx = xhci_get_input_control_ctx(in_ctx);
if (!ctrl_ctx) {
xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
__func__);
@@ -1758,8 +1756,7 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
* to add it again without dropping it, reject the addition.
*/
if (virt_dev->eps[ep_index].ring &&
- !(le32_to_cpu(ctrl_ctx->drop_flags) &
- xhci_get_endpoint_flag(&ep->desc))) {
+ !(le32_to_cpu(ctrl_ctx->drop_flags) & added_ctxs)) {
xhci_warn(xhci, "Trying to add endpoint 0x%x "
"without dropping it.\n",
(unsigned int) ep->desc.bEndpointAddress);
@@ -1769,8 +1766,7 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
/* If the HCD has already noted the endpoint is enabled,
* ignore this request.
*/
- if (le32_to_cpu(ctrl_ctx->add_flags) &
- xhci_get_endpoint_flag(&ep->desc)) {
+ if (le32_to_cpu(ctrl_ctx->add_flags) & added_ctxs) {
xhci_warn(xhci, "xHCI %s called with enabled ep %p\n",
__func__, ep);
return 0;
@@ -1816,7 +1812,7 @@ static void xhci_zero_in_ctx(struct xhci_hcd *xhci, struct xhci_virt_device *vir
struct xhci_slot_ctx *slot_ctx;
int i;
- ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx);
+ ctrl_ctx = xhci_get_input_control_ctx(virt_dev->in_ctx);
if (!ctrl_ctx) {
xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
__func__);
@@ -2542,7 +2538,7 @@ static int xhci_reserve_bandwidth(struct xhci_hcd *xhci,
if (virt_dev->tt_info)
old_active_eps = virt_dev->tt_info->active_eps;
- ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx);
+ ctrl_ctx = xhci_get_input_control_ctx(in_ctx);
if (!ctrl_ctx) {
xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
__func__);
@@ -2639,7 +2635,7 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci,
spin_lock_irqsave(&xhci->lock, flags);
virt_dev = xhci->devs[udev->slot_id];
- ctrl_ctx = xhci_get_input_control_ctx(xhci, command->in_ctx);
+ ctrl_ctx = xhci_get_input_control_ctx(command->in_ctx);
if (!ctrl_ctx) {
spin_unlock_irqrestore(&xhci->lock, flags);
xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
@@ -2758,7 +2754,7 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
command->in_ctx = virt_dev->in_ctx;
/* See section 4.6.6 - A0 = 1; A1 = D0 = D1 = 0 */
- ctrl_ctx = xhci_get_input_control_ctx(xhci, command->in_ctx);
+ ctrl_ctx = xhci_get_input_control_ctx(command->in_ctx);
if (!ctrl_ctx) {
xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
__func__);
@@ -2883,7 +2879,7 @@ static void xhci_setup_input_ctx_for_quirk(struct xhci_hcd *xhci,
dma_addr_t addr;
in_ctx = xhci->devs[slot_id]->in_ctx;
- ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx);
+ ctrl_ctx = xhci_get_input_control_ctx(in_ctx);
if (!ctrl_ctx) {
xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
__func__);
@@ -3173,7 +3169,7 @@ int xhci_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev,
xhci_dbg(xhci, "Could not allocate xHCI command structure.\n");
return -ENOMEM;
}
- ctrl_ctx = xhci_get_input_control_ctx(xhci, config_cmd->in_ctx);
+ ctrl_ctx = xhci_get_input_control_ctx(config_cmd->in_ctx);
if (!ctrl_ctx) {
xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
__func__);
@@ -3328,7 +3324,7 @@ int xhci_free_streams(struct usb_hcd *hcd, struct usb_device *udev,
*/
ep_index = xhci_get_endpoint_index(&eps[0]->desc);
command = vdev->eps[ep_index].stream_info->free_streams_command;
- ctrl_ctx = xhci_get_input_control_ctx(xhci, command->in_ctx);
+ ctrl_ctx = xhci_get_input_control_ctx(command->in_ctx);
if (!ctrl_ctx) {
spin_unlock_irqrestore(&xhci->lock, flags);
xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
@@ -3346,7 +3342,7 @@ int xhci_free_streams(struct usb_hcd *hcd, struct usb_device *udev,
xhci_endpoint_copy(xhci, command->in_ctx,
vdev->out_ctx, ep_index);
- xhci_setup_no_streams_ep_input_ctx(xhci, ep_ctx,
+ xhci_setup_no_streams_ep_input_ctx(ep_ctx,
&vdev->eps[ep_index]);
}
xhci_setup_input_ctx_for_config_ep(xhci, command->in_ctx,
@@ -3820,7 +3816,7 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev,
command->completion = &xhci->addr_dev;
slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx);
- ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx);
+ ctrl_ctx = xhci_get_input_control_ctx(virt_dev->in_ctx);
if (!ctrl_ctx) {
xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
__func__);
@@ -4003,7 +3999,7 @@ static int __maybe_unused xhci_change_max_exit_latency(struct xhci_hcd *xhci,
/* Attempt to issue an Evaluate Context command to change the MEL. */
command = xhci->lpm_command;
- ctrl_ctx = xhci_get_input_control_ctx(xhci, command->in_ctx);
+ ctrl_ctx = xhci_get_input_control_ctx(command->in_ctx);
if (!ctrl_ctx) {
spin_unlock_irqrestore(&xhci->lock, flags);
xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
@@ -4741,7 +4737,7 @@ int xhci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev,
xhci_dbg(xhci, "Could not allocate xHCI command structure.\n");
return -ENOMEM;
}
- ctrl_ctx = xhci_get_input_control_ctx(xhci, config_cmd->in_ctx);
+ ctrl_ctx = xhci_get_input_control_ctx(config_cmd->in_ctx);
if (!ctrl_ctx) {
xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
__func__);
@@ -4910,6 +4906,10 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks)
if (retval)
goto error;
xhci_dbg(xhci, "Called HCD init\n");
+
+ xhci_info(xhci, "hcc params 0x%08x hci version 0x%x quirks 0x%08x\n",
+ xhci->hcc_params, xhci->hci_version, xhci->quirks);
+
return 0;
error:
kfree(xhci);
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index cc7c5bb7cbcf..974514762a14 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1605,6 +1605,8 @@ static inline struct usb_hcd *xhci_to_hcd(struct xhci_hcd *xhci)
dev_warn(xhci_to_hcd(xhci)->self.controller , fmt , ## args)
#define xhci_warn_ratelimited(xhci, fmt, args...) \
dev_warn_ratelimited(xhci_to_hcd(xhci)->self.controller , fmt , ## args)
+#define xhci_info(xhci, fmt, args...) \
+ dev_info(xhci_to_hcd(xhci)->self.controller , fmt , ## args)
/*
* Registers should always be accessed with double word or quad word accesses.
@@ -1712,8 +1714,7 @@ void xhci_free_stream_info(struct xhci_hcd *xhci,
void xhci_setup_streams_ep_input_ctx(struct xhci_hcd *xhci,
struct xhci_ep_ctx *ep_ctx,
struct xhci_stream_info *stream_info);
-void xhci_setup_no_streams_ep_input_ctx(struct xhci_hcd *xhci,
- struct xhci_ep_ctx *ep_ctx,
+void xhci_setup_no_streams_ep_input_ctx(struct xhci_ep_ctx *ep_ctx,
struct xhci_virt_ep *ep);
void xhci_free_device_endpoint_resources(struct xhci_hcd *xhci,
struct xhci_virt_device *virt_dev, bool drop_control_ep);
@@ -1727,14 +1728,13 @@ struct xhci_ring *xhci_stream_id_to_ring(
struct xhci_command *xhci_alloc_command(struct xhci_hcd *xhci,
bool allocate_in_ctx, bool allocate_completion,
gfp_t mem_flags);
-void xhci_urb_free_priv(struct xhci_hcd *xhci, struct urb_priv *urb_priv);
+void xhci_urb_free_priv(struct urb_priv *urb_priv);
void xhci_free_command(struct xhci_hcd *xhci,
struct xhci_command *command);
/* xHCI host controller glue */
typedef void (*xhci_get_quirks_t)(struct device *, struct xhci_hcd *);
-int xhci_handshake(struct xhci_hcd *xhci, void __iomem *ptr,
- u32 mask, u32 done, int usec);
+int xhci_handshake(void __iomem *ptr, u32 mask, u32 done, int usec);
void xhci_quiesce(struct xhci_hcd *xhci);
int xhci_halt(struct xhci_hcd *xhci);
int xhci_reset(struct xhci_hcd *xhci);
@@ -1864,7 +1864,7 @@ int xhci_find_slot_id_by_port(struct usb_hcd *hcd, struct xhci_hcd *xhci,
void xhci_ring_device(struct xhci_hcd *xhci, int slot_id);
/* xHCI contexts */
-struct xhci_input_control_ctx *xhci_get_input_control_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx);
+struct xhci_input_control_ctx *xhci_get_input_control_ctx(struct xhci_container_ctx *ctx);
struct xhci_slot_ctx *xhci_get_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx);
struct xhci_ep_ctx *xhci_get_ep_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx, unsigned int ep_index);