diff options
Diffstat (limited to 'drivers/watchdog/qcom-wdt.c')
| -rw-r--r-- | drivers/watchdog/qcom-wdt.c | 84 |
1 files changed, 71 insertions, 13 deletions
diff --git a/drivers/watchdog/qcom-wdt.c b/drivers/watchdog/qcom-wdt.c index 7be7f87be28f..a494543d3ae1 100644 --- a/drivers/watchdog/qcom-wdt.c +++ b/drivers/watchdog/qcom-wdt.c @@ -1,8 +1,10 @@ // SPDX-License-Identifier: GPL-2.0-only /* Copyright (c) 2014, The Linux Foundation. All rights reserved. */ +#include <linux/bits.h> #include <linux/clk.h> #include <linux/delay.h> +#include <linux/interrupt.h> #include <linux/io.h> #include <linux/kernel.h> #include <linux/module.h> @@ -19,6 +21,9 @@ enum wdt_reg { WDT_BITE_TIME, }; +#define QCOM_WDT_ENABLE BIT(0) +#define QCOM_WDT_ENABLE_IRQ BIT(1) + static const u32 reg_offset_data_apcs_tmr[] = { [WDT_RST] = 0x38, [WDT_EN] = 0x40, @@ -37,7 +42,6 @@ static const u32 reg_offset_data_kpss[] = { struct qcom_wdt { struct watchdog_device wdd; - struct clk *clk; unsigned long rate; void __iomem *base; const u32 *layout; @@ -54,15 +58,35 @@ struct qcom_wdt *to_qcom_wdt(struct watchdog_device *wdd) return container_of(wdd, struct qcom_wdt, wdd); } +static inline int qcom_get_enable(struct watchdog_device *wdd) +{ + int enable = QCOM_WDT_ENABLE; + + if (wdd->pretimeout) + enable |= QCOM_WDT_ENABLE_IRQ; + + return enable; +} + +static irqreturn_t qcom_wdt_isr(int irq, void *arg) +{ + struct watchdog_device *wdd = arg; + + watchdog_notify_pretimeout(wdd); + + return IRQ_HANDLED; +} + static int qcom_wdt_start(struct watchdog_device *wdd) { struct qcom_wdt *wdt = to_qcom_wdt(wdd); + unsigned int bark = wdd->timeout - wdd->pretimeout; writel(0, wdt_addr(wdt, WDT_EN)); writel(1, wdt_addr(wdt, WDT_RST)); - writel(wdd->timeout * wdt->rate, wdt_addr(wdt, WDT_BARK_TIME)); + writel(bark * wdt->rate, wdt_addr(wdt, WDT_BARK_TIME)); writel(wdd->timeout * wdt->rate, wdt_addr(wdt, WDT_BITE_TIME)); - writel(1, wdt_addr(wdt, WDT_EN)); + writel(qcom_get_enable(wdd), wdt_addr(wdt, WDT_EN)); return 0; } @@ -89,6 +113,13 @@ static int qcom_wdt_set_timeout(struct watchdog_device *wdd, return qcom_wdt_start(wdd); } +static int qcom_wdt_set_pretimeout(struct watchdog_device *wdd, + unsigned int timeout) +{ + wdd->pretimeout = timeout; + return qcom_wdt_start(wdd); +} + static int qcom_wdt_restart(struct watchdog_device *wdd, unsigned long action, void *data) { @@ -105,7 +136,7 @@ static int qcom_wdt_restart(struct watchdog_device *wdd, unsigned long action, writel(1, wdt_addr(wdt, WDT_RST)); writel(timeout, wdt_addr(wdt, WDT_BARK_TIME)); writel(timeout, wdt_addr(wdt, WDT_BITE_TIME)); - writel(1, wdt_addr(wdt, WDT_EN)); + writel(QCOM_WDT_ENABLE, wdt_addr(wdt, WDT_EN)); /* * Actually make sure the above sequence hits hardware before sleeping. @@ -121,6 +152,7 @@ static const struct watchdog_ops qcom_wdt_ops = { .stop = qcom_wdt_stop, .ping = qcom_wdt_ping, .set_timeout = qcom_wdt_set_timeout, + .set_pretimeout = qcom_wdt_set_pretimeout, .restart = qcom_wdt_restart, .owner = THIS_MODULE, }; @@ -133,6 +165,15 @@ static const struct watchdog_info qcom_wdt_info = { .identity = KBUILD_MODNAME, }; +static const struct watchdog_info qcom_wdt_pt_info = { + .options = WDIOF_KEEPALIVEPING + | WDIOF_MAGICCLOSE + | WDIOF_SETTIMEOUT + | WDIOF_PRETIMEOUT + | WDIOF_CARDRESET, + .identity = KBUILD_MODNAME, +}; + static void qcom_clk_disable_unprepare(void *data) { clk_disable_unprepare(data); @@ -146,7 +187,8 @@ static int qcom_wdt_probe(struct platform_device *pdev) struct device_node *np = dev->of_node; const u32 *regs; u32 percpu_offset; - int ret; + int irq, ret; + struct clk *clk; regs = of_device_get_match_data(dev); if (!regs) { @@ -173,19 +215,18 @@ static int qcom_wdt_probe(struct platform_device *pdev) if (IS_ERR(wdt->base)) return PTR_ERR(wdt->base); - wdt->clk = devm_clk_get(dev, NULL); - if (IS_ERR(wdt->clk)) { + clk = devm_clk_get(dev, NULL); + if (IS_ERR(clk)) { dev_err(dev, "failed to get input clock\n"); - return PTR_ERR(wdt->clk); + return PTR_ERR(clk); } - ret = clk_prepare_enable(wdt->clk); + ret = clk_prepare_enable(clk); if (ret) { dev_err(dev, "failed to setup clock\n"); return ret; } - ret = devm_add_action_or_reset(dev, qcom_clk_disable_unprepare, - wdt->clk); + ret = devm_add_action_or_reset(dev, qcom_clk_disable_unprepare, clk); if (ret) return ret; @@ -197,14 +238,31 @@ static int qcom_wdt_probe(struct platform_device *pdev) * that it would bite before a second elapses it's usefulness is * limited. Bail if this is the case. */ - wdt->rate = clk_get_rate(wdt->clk); + wdt->rate = clk_get_rate(clk); if (wdt->rate == 0 || wdt->rate > 0x10000000U) { dev_err(dev, "invalid clock rate\n"); return -EINVAL; } - wdt->wdd.info = &qcom_wdt_info; + /* check if there is pretimeout support */ + irq = platform_get_irq(pdev, 0); + if (irq > 0) { + ret = devm_request_irq(dev, irq, qcom_wdt_isr, + IRQF_TRIGGER_RISING, + "wdt_bark", &wdt->wdd); + if (ret) + return ret; + + wdt->wdd.info = &qcom_wdt_pt_info; + wdt->wdd.pretimeout = 1; + } else { + if (irq == -EPROBE_DEFER) + return -EPROBE_DEFER; + + wdt->wdd.info = &qcom_wdt_info; + } + wdt->wdd.ops = &qcom_wdt_ops; wdt->wdd.min_timeout = 1; wdt->wdd.max_timeout = 0x10000000U / wdt->rate; |