diff options
Diffstat (limited to 'drivers')
283 files changed, 25557 insertions, 8445 deletions
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig index a796407123c7..f529407db93f 100644 --- a/drivers/block/Kconfig +++ b/drivers/block/Kconfig @@ -353,18 +353,6 @@ config BLK_DEV_SX8 Use devices /dev/sx8/$N and /dev/sx8/$Np$M. -config BLK_DEV_UB - tristate "Low Performance USB Block driver (deprecated)" - depends on USB - help - This driver supports certain USB attached storage devices - such as flash keys. - - If you enable this driver, it is recommended to avoid conflicts - with usb-storage by enabling USB_LIBUSUAL. - - If unsure, say N. - config BLK_DEV_RAM tristate "RAM block device support" ---help--- diff --git a/drivers/block/Makefile b/drivers/block/Makefile index 5b795059f8fb..17e82df3df74 100644 --- a/drivers/block/Makefile +++ b/drivers/block/Makefile @@ -33,7 +33,6 @@ obj-$(CONFIG_VIRTIO_BLK) += virtio_blk.o obj-$(CONFIG_VIODASD) += viodasd.o obj-$(CONFIG_BLK_DEV_SX8) += sx8.o -obj-$(CONFIG_BLK_DEV_UB) += ub.o obj-$(CONFIG_BLK_DEV_HD) += hd.o obj-$(CONFIG_XEN_BLKDEV_FRONTEND) += xen-blkfront.o diff --git a/drivers/block/ub.c b/drivers/block/ub.c deleted file mode 100644 index fcec0225ac76..000000000000 --- a/drivers/block/ub.c +++ /dev/null @@ -1,2474 +0,0 @@ -/* - * The low performance USB storage driver (ub). - * - * Copyright (c) 1999, 2000 Matthew Dharm (mdharm-usb@one-eyed-alien.net) - * Copyright (C) 2004 Pete Zaitcev (zaitcev@yahoo.com) - * - * This work is a part of Linux kernel, is derived from it, - * and is not licensed separately. See file COPYING for details. - * - * TODO (sorted by decreasing priority) - * -- Return sense now that rq allows it (we always auto-sense anyway). - * -- set readonly flag for CDs, set removable flag for CF readers - * -- do inquiry and verify we got a disk and not a tape (for LUN mismatch) - * -- verify the 13 conditions and do bulk resets - * -- highmem - * -- move top_sense and work_bcs into separate allocations (if they survive) - * for cache purists and esoteric architectures. - * -- Allocate structure for LUN 0 before the first ub_sync_tur, avoid NULL. ? - * -- prune comments, they are too volumnous - * -- Resove XXX's - * -- CLEAR, CLR2STS, CLRRS seem to be ripe for refactoring. - */ -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/usb.h> -#include <linux/usb_usual.h> -#include <linux/blkdev.h> -#include <linux/timer.h> -#include <linux/scatterlist.h> -#include <linux/slab.h> -#include <linux/mutex.h> -#include <scsi/scsi.h> - -#define DRV_NAME "ub" - -#define UB_MAJOR 180 - -/* - * The command state machine is the key model for understanding of this driver. - * - * The general rule is that all transitions are done towards the bottom - * of the diagram, thus preventing any loops. - * - * An exception to that is how the STAT state is handled. A counter allows it - * to be re-entered along the path marked with [C]. - * - * +--------+ - * ! INIT ! - * +--------+ - * ! - * ub_scsi_cmd_start fails ->--------------------------------------\ - * ! ! - * V ! - * +--------+ ! - * ! CMD ! ! - * +--------+ ! - * ! +--------+ ! - * was -EPIPE -->-------------------------------->! CLEAR ! ! - * ! +--------+ ! - * ! ! ! - * was error -->------------------------------------- ! --------->\ - * ! ! ! - * /--<-- cmd->dir == NONE ? ! ! - * ! ! ! ! - * ! V ! ! - * ! +--------+ ! ! - * ! ! DATA ! ! ! - * ! +--------+ ! ! - * ! ! +---------+ ! ! - * ! was -EPIPE -->--------------->! CLR2STS ! ! ! - * ! ! +---------+ ! ! - * ! ! ! ! ! - * ! ! was error -->---- ! --------->\ - * ! was error -->--------------------- ! ------------- ! --------->\ - * ! ! ! ! ! - * ! V ! ! ! - * \--->+--------+ ! ! ! - * ! STAT !<--------------------------/ ! ! - * /--->+--------+ ! ! - * ! ! ! ! - * [C] was -EPIPE -->-----------\ ! ! - * ! ! ! ! ! - * +<---- len == 0 ! ! ! - * ! ! ! ! ! - * ! was error -->--------------------------------------!---------->\ - * ! ! ! ! ! - * +<---- bad CSW ! ! ! - * +<---- bad tag ! ! ! - * ! ! V ! ! - * ! ! +--------+ ! ! - * ! ! ! CLRRS ! ! ! - * ! ! +--------+ ! ! - * ! ! ! ! ! - * \------- ! --------------------[C]--------\ ! ! - * ! ! ! ! - * cmd->error---\ +--------+ ! ! - * ! +--------------->! SENSE !<----------/ ! - * STAT_FAIL----/ +--------+ ! - * ! ! V - * ! V +--------+ - * \--------------------------------\--------------------->! DONE ! - * +--------+ - */ - -/* - * This many LUNs per USB device. - * Every one of them takes a host, see UB_MAX_HOSTS. - */ -#define UB_MAX_LUNS 9 - -/* - */ - -#define UB_PARTS_PER_LUN 8 - -#define UB_MAX_CDB_SIZE 16 /* Corresponds to Bulk */ - -#define UB_SENSE_SIZE 18 - -/* - */ -struct ub_dev; - -#define UB_MAX_REQ_SG 9 /* cdrecord requires 32KB and maybe a header */ -#define UB_MAX_SECTORS 64 - -/* - * A second is more than enough for a 32K transfer (UB_MAX_SECTORS) - * even if a webcam hogs the bus, but some devices need time to spin up. - */ -#define UB_URB_TIMEOUT (HZ*2) -#define UB_DATA_TIMEOUT (HZ*5) /* ZIP does spin-ups in the data phase */ -#define UB_STAT_TIMEOUT (HZ*5) /* Same spinups and eject for a dataless cmd. */ -#define UB_CTRL_TIMEOUT (HZ/2) /* 500ms ought to be enough to clear a stall */ - -/* - * An instance of a SCSI command in transit. - */ -#define UB_DIR_NONE 0 -#define UB_DIR_READ 1 -#define UB_DIR_ILLEGAL2 2 -#define UB_DIR_WRITE 3 - -#define UB_DIR_CHAR(c) (((c)==UB_DIR_WRITE)? 'w': \ - (((c)==UB_DIR_READ)? 'r': 'n')) - -enum ub_scsi_cmd_state { - UB_CMDST_INIT, /* Initial state */ - UB_CMDST_CMD, /* Command submitted */ - UB_CMDST_DATA, /* Data phase */ - UB_CMDST_CLR2STS, /* Clearing before requesting status */ - UB_CMDST_STAT, /* Status phase */ - UB_CMDST_CLEAR, /* Clearing a stall (halt, actually) */ - UB_CMDST_CLRRS, /* Clearing before retrying status */ - UB_CMDST_SENSE, /* Sending Request Sense */ - UB_CMDST_DONE /* Final state */ -}; - -struct ub_scsi_cmd { - unsigned char cdb[UB_MAX_CDB_SIZE]; - unsigned char cdb_len; - - unsigned char dir; /* 0 - none, 1 - read, 3 - write. */ - enum ub_scsi_cmd_state state; - unsigned int tag; - struct ub_scsi_cmd *next; - - int error; /* Return code - valid upon done */ - unsigned int act_len; /* Return size */ - unsigned char key, asc, ascq; /* May be valid if error==-EIO */ - - int stat_count; /* Retries getting status. */ - unsigned int timeo; /* jiffies until rq->timeout changes */ - - unsigned int len; /* Requested length */ - unsigned int current_sg; - unsigned int nsg; /* sgv[nsg] */ - struct scatterlist sgv[UB_MAX_REQ_SG]; - - struct ub_lun *lun; - void (*done)(struct ub_dev *, struct ub_scsi_cmd *); - void *back; -}; - -struct ub_request { - struct request *rq; - unsigned int current_try; - unsigned int nsg; /* sgv[nsg] */ - struct scatterlist sgv[UB_MAX_REQ_SG]; -}; - -/* - */ -struct ub_capacity { - unsigned long nsec; /* Linux size - 512 byte sectors */ - unsigned int bsize; /* Linux hardsect_size */ - unsigned int bshift; /* Shift between 512 and hard sects */ -}; - -/* - * This is a direct take-off from linux/include/completion.h - * The difference is that I do not wait on this thing, just poll. - * When I want to wait (ub_probe), I just use the stock completion. - * - * Note that INIT_COMPLETION takes no lock. It is correct. But why - * in the bloody hell that thing takes struct instead of pointer to struct - * is quite beyond me. I just copied it from the stock completion. - */ -struct ub_completion { - unsigned int done; - spinlock_t lock; -}; - -static DEFINE_MUTEX(ub_mutex); -static inline void ub_init_completion(struct ub_completion *x) -{ - x->done = 0; - spin_lock_init(&x->lock); -} - -#define UB_INIT_COMPLETION(x) ((x).done = 0) - -static void ub_complete(struct ub_completion *x) -{ - unsigned long flags; - - spin_lock_irqsave(&x->lock, flags); - x->done++; - spin_unlock_irqrestore(&x->lock, flags); -} - -static int ub_is_completed(struct ub_completion *x) -{ - unsigned long flags; - int ret; - - spin_lock_irqsave(&x->lock, flags); - ret = x->done; - spin_unlock_irqrestore(&x->lock, flags); - return ret; -} - -/* - */ -struct ub_scsi_cmd_queue { - int qlen, qmax; - struct ub_scsi_cmd *head, *tail; -}; - -/* - * The block device instance (one per LUN). - */ -struct ub_lun { - struct ub_dev *udev; - struct list_head link; - struct gendisk *disk; - int id; /* Host index */ - int num; /* LUN number */ - char name[16]; - - int changed; /* Media was changed */ - int removable; - int readonly; - - struct ub_request urq; - - /* Use Ingo's mempool if or when we have more than one command. */ - /* - * Currently we never need more than one command for the whole device. - * However, giving every LUN a command is a cheap and automatic way - * to enforce fairness between them. - */ - int cmda[1]; - struct ub_scsi_cmd cmdv[1]; - - struct ub_capacity capacity; -}; - -/* - * The USB device instance. - */ -struct ub_dev { - spinlock_t *lock; - atomic_t poison; /* The USB device is disconnected */ - int openc; /* protected by ub_lock! */ - /* kref is too implicit for our taste */ - int reset; /* Reset is running */ - int bad_resid; - unsigned int tagcnt; - char name[12]; - struct usb_device *dev; - struct usb_interface *intf; - - struct list_head luns; - - unsigned int send_bulk_pipe; /* cached pipe values */ - unsigned int recv_bulk_pipe; - unsigned int send_ctrl_pipe; - unsigned int recv_ctrl_pipe; - - struct tasklet_struct tasklet; - - struct ub_scsi_cmd_queue cmd_queue; - struct ub_scsi_cmd top_rqs_cmd; /* REQUEST SENSE */ - unsigned char top_sense[UB_SENSE_SIZE]; - - struct ub_completion work_done; - struct urb work_urb; - struct timer_list work_timer; - int last_pipe; /* What might need clearing */ - __le32 signature; /* Learned signature */ - struct bulk_cb_wrap work_bcb; - struct bulk_cs_wrap work_bcs; - struct usb_ctrlrequest work_cr; - - struct work_struct reset_work; - wait_queue_head_t reset_wait; -}; - -/* - */ -static void ub_cleanup(struct ub_dev *sc); -static int ub_request_fn_1(struct ub_lun *lun, struct request *rq); -static void ub_cmd_build_block(struct ub_dev *sc, struct ub_lun *lun, - struct ub_scsi_cmd *cmd, struct ub_request *urq); -static void ub_cmd_build_packet(struct ub_dev *sc, struct ub_lun *lun, - struct ub_scsi_cmd *cmd, struct ub_request *urq); -static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd); -static void ub_end_rq(struct request *rq, unsigned int status); -static int ub_rw_cmd_retry(struct ub_dev *sc, struct ub_lun *lun, - struct ub_request *urq, struct ub_scsi_cmd *cmd); -static int ub_submit_scsi(struct ub_dev *sc, struct ub_scsi_cmd *cmd); -static void ub_urb_complete(struct urb *urb); -static void ub_scsi_action(unsigned long _dev); -static void ub_scsi_dispatch(struct ub_dev *sc); -static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd); -static void ub_data_start(struct ub_dev *sc, struct ub_scsi_cmd *cmd); -static void ub_state_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd, int rc); -static int __ub_state_stat(struct ub_dev *sc, struct ub_scsi_cmd *cmd); -static void ub_state_stat(struct ub_dev *sc, struct ub_scsi_cmd *cmd); -static void ub_state_stat_counted(struct ub_dev *sc, struct ub_scsi_cmd *cmd); -static void ub_state_sense(struct ub_dev *sc, struct ub_scsi_cmd *cmd); -static int ub_submit_clear_stall(struct ub_dev *sc, struct ub_scsi_cmd *cmd, - int stalled_pipe); -static void ub_top_sense_done(struct ub_dev *sc, struct ub_scsi_cmd *scmd); -static void ub_reset_enter(struct ub_dev *sc, int try); -static void ub_reset_task(struct work_struct *work); -static int ub_sync_tur(struct ub_dev *sc, struct ub_lun *lun); -static int ub_sync_read_cap(struct ub_dev *sc, struct ub_lun *lun, - struct ub_capacity *ret); -static int ub_sync_reset(struct ub_dev *sc); -static int ub_probe_clear_stall(struct ub_dev *sc, int stalled_pipe); -static int ub_probe_lun(struct ub_dev *sc, int lnum); - -/* - */ -#ifdef CONFIG_USB_LIBUSUAL - -#define ub_usb_ids usb_storage_usb_ids -#else - -static const struct usb_device_id ub_usb_ids[] = { - { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, USB_SC_SCSI, USB_PR_BULK) }, - { } -}; - -MODULE_DEVICE_TABLE(usb, ub_usb_ids); -#endif /* CONFIG_USB_LIBUSUAL */ - -/* - * Find me a way to identify "next free minor" for add_disk(), - * and the array disappears the next day. However, the number of - * hosts has something to do with the naming and /proc/partitions. - * This has to be thought out in detail before changing. - * If UB_MAX_HOST was 1000, we'd use a bitmap. Or a better data structure. - */ -#define UB_MAX_HOSTS 26 -static char ub_hostv[UB_MAX_HOSTS]; - -#define UB_QLOCK_NUM 5 -static spinlock_t ub_qlockv[UB_QLOCK_NUM]; -static int ub_qlock_next = 0; - -static DEFINE_SPINLOCK(ub_lock); /* Locks globals and ->openc */ - -/* - * The id allocator. - * - * This also stores the host for indexing by minor, which is somewhat dirty. - */ -static int ub_id_get(void) -{ - unsigned long flags; - int i; - - spin_lock_irqsave(&ub_lock, flags); - for (i = 0; i < UB_MAX_HOSTS; i++) { - if (ub_hostv[i] == 0) { - ub_hostv[i] = 1; - spin_unlock_irqrestore(&ub_lock, flags); - return i; - } - } - spin_unlock_irqrestore(&ub_lock, flags); - return -1; -} - -static void ub_id_put(int id) -{ - unsigned long flags; - - if (id < 0 || id >= UB_MAX_HOSTS) { - printk(KERN_ERR DRV_NAME ": bad host ID %d\n", id); - return; - } - - spin_lock_irqsave(&ub_lock, flags); - if (ub_hostv[id] == 0) { - spin_unlock_irqrestore(&ub_lock, flags); - printk(KERN_ERR DRV_NAME ": freeing free host ID %d\n", id); - return; - } - ub_hostv[id] = 0; - spin_unlock_irqrestore(&ub_lock, flags); -} - -/* - * This is necessitated by the fact that blk_cleanup_queue does not - * necesserily destroy the queue. Instead, it may merely decrease q->refcnt. - * Since our blk_init_queue() passes a spinlock common with ub_dev, - * we have life time issues when ub_cleanup frees ub_dev. - */ -static spinlock_t *ub_next_lock(void) -{ - unsigned long flags; - spinlock_t *ret; - - spin_lock_irqsave(&ub_lock, flags); - ret = &ub_qlockv[ub_qlock_next]; - ub_qlock_next = (ub_qlock_next + 1) % UB_QLOCK_NUM; - spin_unlock_irqrestore(&ub_lock, flags); - return ret; -} - -/* - * Downcount for deallocation. This rides on two assumptions: - * - once something is poisoned, its refcount cannot grow - * - opens cannot happen at this time (del_gendisk was done) - * If the above is true, we can drop the lock, which we need for - * blk_cleanup_queue(): the silly thing may attempt to sleep. - * [Actually, it never needs to sleep for us, but it calls might_sleep()] - */ -static void ub_put(struct ub_dev *sc) -{ - unsigned long flags; - - spin_lock_irqsave(&ub_lock, flags); - --sc->openc; - if (sc->openc == 0 && atomic_read(&sc->poison)) { - spin_unlock_irqrestore(&ub_lock, flags); - ub_cleanup(sc); - } else { - spin_unlock_irqrestore(&ub_lock, flags); - } -} - -/* - * Final cleanup and deallocation. - */ -static void ub_cleanup(struct ub_dev *sc) -{ - struct list_head *p; - struct ub_lun *lun; - struct request_queue *q; - - while (!list_empty(&sc->luns)) { - p = sc->luns.next; - lun = list_entry(p, struct ub_lun, link); - list_del(p); - - /* I don't think queue can be NULL. But... Stolen from sx8.c */ - if ((q = lun->disk->queue) != NULL) - blk_cleanup_queue(q); - /* - * If we zero disk->private_data BEFORE put_disk, we have - * to check for NULL all over the place in open, release, - * check_media and revalidate, because the block level - * semaphore is well inside the put_disk. - * But we cannot zero after the call, because *disk is gone. - * The sd.c is blatantly racy in this area. - */ - /* disk->private_data = NULL; */ - put_disk(lun->disk); - lun->disk = NULL; - - ub_id_put(lun->id); - kfree(lun); - } - - usb_set_intfdata(sc->intf, NULL); - usb_put_intf(sc->intf); - usb_put_dev(sc->dev); - kfree(sc); -} - -/* - * The "command allocator". - */ -static struct ub_scsi_cmd *ub_get_cmd(struct ub_lun *lun) -{ - struct ub_scsi_cmd *ret; - - if (lun->cmda[0]) - return NULL; - ret = &lun->cmdv[0]; - lun->cmda[0] = 1; - return ret; -} - -static void ub_put_cmd(struct ub_lun *lun, struct ub_scsi_cmd *cmd) -{ - if (cmd != &lun->cmdv[0]) { - printk(KERN_WARNING "%s: releasing a foreign cmd %p\n", - lun->name, cmd); - return; - } - if (!lun->cmda[0]) { - printk(KERN_WARNING "%s: releasing a free cmd\n", lun->name); - return; - } - lun->cmda[0] = 0; -} - -/* - * The command queue. - */ -static void ub_cmdq_add(struct ub_dev *sc, struct ub_scsi_cmd *cmd) -{ - struct ub_scsi_cmd_queue *t = &sc->cmd_queue; - - if (t->qlen++ == 0) { - t->head = cmd; - t->tail = cmd; - } else { - t->tail->next = cmd; - t->tail = cmd; - } - - if (t->qlen > t->qmax) - t->qmax = t->qlen; -} - -static void ub_cmdq_insert(struct ub_dev *sc, struct ub_scsi_cmd *cmd) -{ - struct ub_scsi_cmd_queue *t = &sc->cmd_queue; - - if (t->qlen++ == 0) { - t->head = cmd; - t->tail = cmd; - } else { - cmd->next = t->head; - t->head = cmd; - } - - if (t->qlen > t->qmax) - t->qmax = t->qlen; -} - -static struct ub_scsi_cmd *ub_cmdq_pop(struct ub_dev *sc) -{ - struct ub_scsi_cmd_queue *t = &sc->cmd_queue; - struct ub_scsi_cmd *cmd; - - if (t->qlen == 0) - return NULL; - if (--t->qlen == 0) - t->tail = NULL; - cmd = t->head; - t->head = cmd->next; - cmd->next = NULL; - return cmd; -} - -#define ub_cmdq_peek(sc) ((sc)->cmd_queue.head) - -/* - * The request function is our main entry point - */ - -static void ub_request_fn(struct request_queue *q) -{ - struct ub_lun *lun = q->queuedata; - struct request *rq; - - while ((rq = blk_peek_request(q)) != NULL) { - if (ub_request_fn_1(lun, rq) != 0) { - blk_stop_queue(q); - break; - } - } -} - -static int ub_request_fn_1(struct ub_lun *lun, struct request *rq) -{ - struct ub_dev *sc = lun->udev; - struct ub_scsi_cmd *cmd; - struct ub_request *urq; - int n_elem; - - if (atomic_read(&sc->poison)) { - blk_start_request(rq); - ub_end_rq(rq, DID_NO_CONNECT << 16); - return 0; - } - - if (lun->changed && rq->cmd_type != REQ_TYPE_BLOCK_PC) { - blk_start_request(rq); - ub_end_rq(rq, SAM_STAT_CHECK_CONDITION); - return 0; - } - - if (lun->urq.rq != NULL) - return -1; - if ((cmd = ub_get_cmd(lun)) == NULL) - return -1; - memset(cmd, 0, sizeof(struct ub_scsi_cmd)); - - blk_start_request(rq); - - urq = &lun->urq; - memset(urq, 0, sizeof(struct ub_request)); - urq->rq = rq; - - /* - * get scatterlist from block layer - */ - sg_init_table(&urq->sgv[0], UB_MAX_REQ_SG); - n_elem = blk_rq_map_sg(lun->disk->queue, rq, &urq->sgv[0]); - if (n_elem < 0) { - /* Impossible, because blk_rq_map_sg should not hit ENOMEM. */ - printk(KERN_INFO "%s: failed request map (%d)\n", - lun->name, n_elem); - goto drop; - } - if (n_elem > UB_MAX_REQ_SG) { /* Paranoia */ - printk(KERN_WARNING "%s: request with %d segments\n", - lun->name, n_elem); - goto drop; - } - urq->nsg = n_elem; - - if (rq->cmd_type == REQ_TYPE_BLOCK_PC) { - ub_cmd_build_packet(sc, lun, cmd, urq); - } else { - ub_cmd_build_block(sc, lun, cmd, urq); - } - cmd->state = UB_CMDST_INIT; - cmd->lun = lun; - cmd->done = ub_rw_cmd_done; - cmd->back = urq; - - cmd->tag = sc->tagcnt++; - if (ub_submit_scsi(sc, cmd) != 0) - goto drop; - - return 0; - -drop: - ub_put_cmd(lun, cmd); - ub_end_rq(rq, DID_ERROR << 16); - return 0; -} - -static void ub_cmd_build_block(struct ub_dev *sc, struct ub_lun *lun, - struct ub_scsi_cmd *cmd, struct ub_request *urq) -{ - struct request *rq = urq->rq; - unsigned int block, nblks; - - if (rq_data_dir(rq) == WRITE) - cmd->dir = UB_DIR_WRITE; - else - cmd->dir = UB_DIR_READ; - - cmd->nsg = urq->nsg; - memcpy(cmd->sgv, urq->sgv, sizeof(struct scatterlist) * cmd->nsg); - - /* - * build the command - * - * The call to blk_queue_logical_block_size() guarantees that request - * is aligned, but it is given in terms of 512 byte units, always. - */ - block = blk_rq_pos(rq) >> lun->capacity.bshift; - nblks = blk_rq_sectors(rq) >> lun->capacity.bshift; - - cmd->cdb[0] = (cmd->dir == UB_DIR_READ)? READ_10: WRITE_10; - /* 10-byte uses 4 bytes of LBA: 2147483648KB, 2097152MB, 2048GB */ - cmd->cdb[2] = block >> 24; - cmd->cdb[3] = block >> 16; - cmd->cdb[4] = block >> 8; - cmd->cdb[5] = block; - cmd->cdb[7] = nblks >> 8; - cmd->cdb[8] = nblks; - cmd->cdb_len = 10; - - cmd->len = blk_rq_bytes(rq); -} - -static void ub_cmd_build_packet(struct ub_dev *sc, struct ub_lun *lun, - struct ub_scsi_cmd *cmd, struct ub_request *urq) -{ - struct request *rq = urq->rq; - - if (blk_rq_bytes(rq) == 0) { - cmd->dir = UB_DIR_NONE; - } else { - if (rq_data_dir(rq) == WRITE) - cmd->dir = UB_DIR_WRITE; - else - cmd->dir = UB_DIR_READ; - } - - cmd->nsg = urq->nsg; - memcpy(cmd->sgv, urq->sgv, sizeof(struct scatterlist) * cmd->nsg); - - memcpy(&cmd->cdb, rq->cmd, rq->cmd_len); - cmd->cdb_len = rq->cmd_len; - - cmd->len = blk_rq_bytes(rq); - - /* - * To reapply this to every URB is not as incorrect as it looks. - * In return, we avoid any complicated tracking calculations. - */ - cmd->timeo = rq->timeout; -} - -static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd) -{ - struct ub_lun *lun = cmd->lun; - struct ub_request *urq = cmd->back; - struct request *rq; - unsigned int scsi_status; - - rq = urq->rq; - - if (cmd->error == 0) { - if (rq->cmd_type == REQ_TYPE_BLOCK_PC) { - if (cmd->act_len >= rq->resid_len) - rq->resid_len = 0; - else - rq->resid_len -= cmd->act_len; - scsi_status = 0; - } else { - if (cmd->act_len != cmd->len) { - scsi_status = SAM_STAT_CHECK_CONDITION; - } else { - scsi_status = 0; - } - } - } else { - if (rq->cmd_type == REQ_TYPE_BLOCK_PC) { - /* UB_SENSE_SIZE is smaller than SCSI_SENSE_BUFFERSIZE */ - memcpy(rq->sense, sc->top_sense, UB_SENSE_SIZE); - rq->sense_len = UB_SENSE_SIZE; - if (sc->top_sense[0] != 0) - scsi_status = SAM_STAT_CHECK_CONDITION; - else - scsi_status = DID_ERROR << 16; - } else { - if (cmd->error == -EIO && - (cmd->key == 0 || - cmd->key == MEDIUM_ERROR || - cmd->key == UNIT_ATTENTION)) { - if (ub_rw_cmd_retry(sc, lun, urq, cmd) == 0) - return; - } - scsi_status = SAM_STAT_CHECK_CONDITION; - } - } - - urq->rq = NULL; - - ub_put_cmd(lun, cmd); - ub_end_rq(rq, scsi_status); - blk_start_queue(lun->disk->queue); -} - -static void ub_end_rq(struct request *rq, unsigned int scsi_status) -{ - int error; - - if (scsi_status == 0) { - error = 0; - } else { - error = -EIO; - rq->errors = scsi_status; - } - __blk_end_request_all(rq, error); -} - -static int ub_rw_cmd_retry(struct ub_dev *sc, struct ub_lun *lun, - struct ub_request *urq, struct ub_scsi_cmd *cmd) -{ - - if (atomic_read(&sc->poison)) - return -ENXIO; - - ub_reset_enter(sc, urq->current_try); - - if (urq->current_try >= 3) - return -EIO; - urq->current_try++; - - /* Remove this if anyone complains of flooding. */ - printk(KERN_DEBUG "%s: dir %c len/act %d/%d " - "[sense %x %02x %02x] retry %d\n", - sc->name, UB_DIR_CHAR(cmd->dir), cmd->len, cmd->act_len, - cmd->key, cmd->asc, cmd->ascq, urq->current_try); - - memset(cmd, 0, sizeof(struct ub_scsi_cmd)); - ub_cmd_build_block(sc, lun, cmd, urq); - - cmd->state = UB_CMDST_INIT; - cmd->lun = lun; - cmd->done = ub_rw_cmd_done; - cmd->back = urq; - - cmd->tag = sc->tagcnt++; - -#if 0 /* Wasteful */ - return ub_submit_scsi(sc, cmd); -#else - ub_cmdq_add(sc, cmd); - return 0; -#endif -} - -/* - * Submit a regular SCSI operation (not an auto-sense). - * - * The Iron Law of Good Submit Routine is: - * Zero return - callback is done, Nonzero return - callback is not done. - * No exceptions. - * - * Host is assumed locked. - */ -static int ub_submit_scsi(struct ub_dev *sc, struct ub_scsi_cmd *cmd) -{ - - if (cmd->state != UB_CMDST_INIT || - (cmd->dir != UB_DIR_NONE && cmd->len == 0)) { - return -EINVAL; - } - - ub_cmdq_add(sc, cmd); - /* - * We can call ub_scsi_dispatch(sc) right away here, but it's a little - * safer to jump to a tasklet, in case upper layers do something silly. - */ - tasklet_schedule(&sc->tasklet); - return 0; -} - -/* - * Submit the first URB for the queued command. - * This function does not deal with queueing in any way. - */ -static int ub_scsi_cmd_start(struct ub_dev *sc, struct ub_scsi_cmd *cmd) -{ - struct bulk_cb_wrap *bcb; - int rc; - - bcb = &sc->work_bcb; - - /* - * ``If the allocation length is eighteen or greater, and a device - * server returns less than eithteen bytes of data, the application - * client should assume that the bytes not transferred would have been - * zeroes had the device server returned those bytes.'' - * - * We zero sense for all commands so that when a packet request - * fails it does not return a stale sense. - */ - memset(&sc->top_sense, 0, UB_SENSE_SIZE); - - /* set up the command wrapper */ - bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN); - bcb->Tag = cmd->tag; /* Endianness is not important */ - bcb->DataTransferLength = cpu_to_le32(cmd->len); - bcb->Flags = (cmd->dir == UB_DIR_READ) ? 0x80 : 0; - bcb->Lun = (cmd->lun != NULL) ? cmd->lun->num : 0; - bcb->Length = cmd->cdb_len; - - /* copy the command payload */ - memcpy(bcb->CDB, cmd->cdb, UB_MAX_CDB_SIZE); - - UB_INIT_COMPLETION(sc->work_done); - - sc->last_pipe = sc->send_bulk_pipe; - usb_fill_bulk_urb(&sc->work_urb, sc->dev, sc->send_bulk_pipe, - bcb, US_BULK_CB_WRAP_LEN, ub_urb_complete, sc); - - if ((rc = usb_submit_urb(&sc->work_urb, GFP_ATOMIC)) != 0) { - /* XXX Clear stalls */ - ub_complete(&sc->work_done); - return rc; - } - - sc->work_timer.expires = jiffies + UB_URB_TIMEOUT; - add_timer(&sc->work_timer); - - cmd->state = UB_CMDST_CMD; - return 0; -} - -/* - * Timeout handler. - */ -static void ub_urb_timeout(unsigned long arg) -{ - struct ub_dev *sc = (struct ub_dev *) arg; - unsigned long flags; - - spin_lock_irqsave(sc->lock, flags); - if (!ub_is_completed(&sc->work_done)) - usb_unlink_urb(&sc->work_urb); - spin_unlock_irqrestore(sc->lock, flags); -} - -/* - * Completion routine for the work URB. - * - * This can be called directly from usb_submit_urb (while we have - * the sc->lock taken) and from an interrupt (while we do NOT have - * the sc->lock taken). Therefore, bounce this off to a tasklet. - */ -static void ub_urb_complete(struct urb *urb) -{ - struct ub_dev *sc = urb->context; - - ub_complete(&sc->work_done); - tasklet_schedule(&sc->tasklet); -} - -static void ub_scsi_action(unsigned long _dev) -{ - struct ub_dev *sc = (struct ub_dev *) _dev; - unsigned long flags; - - spin_lock_irqsave(sc->lock, flags); - ub_scsi_dispatch(sc); - spin_unlock_irqrestore(sc->lock, flags); -} - -static void ub_scsi_dispatch(struct ub_dev *sc) -{ - struct ub_scsi_cmd *cmd; - int rc; - - while (!sc->reset && (cmd = ub_cmdq_peek(sc)) != NULL) { - if (cmd->state == UB_CMDST_DONE) { - ub_cmdq_pop(sc); - (*cmd->done)(sc, cmd); - } else if (cmd->state == UB_CMDST_INIT) { - if ((rc = ub_scsi_cmd_start(sc, cmd)) == 0) - break; - cmd->error = rc; - cmd->state = UB_CMDST_DONE; - } else { - if (!ub_is_completed(&sc->work_done)) - break; - del_timer(&sc->work_timer); - ub_scsi_urb_compl(sc, cmd); - } - } -} - -static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) -{ - struct urb *urb = &sc->work_urb; - struct bulk_cs_wrap *bcs; - int endp; - int len; - int rc; - - if (atomic_read(&sc->poison)) { - ub_state_done(sc, cmd, -ENODEV); - return; - } - - endp = usb_pipeendpoint(sc->last_pipe); - if (usb_pipein(sc->last_pipe)) - endp |= USB_DIR_IN; - - if (cmd->state == UB_CMDST_CLEAR) { - if (urb->status == -EPIPE) { - /* - * STALL while clearning STALL. - * The control pipe clears itself - nothing to do. - */ - printk(KERN_NOTICE "%s: stall on control pipe\n", - sc->name); - goto Bad_End; - } - - /* - * We ignore the result for the halt clear. - */ - - usb_reset_endpoint(sc->dev, endp); - - ub_state_sense(sc, cmd); - - } else if (cmd->state == UB_CMDST_CLR2STS) { - if (urb->status == -EPIPE) { - printk(KERN_NOTICE "%s: stall on control pipe\n", - sc->name); - goto Bad_End; - } - - /* - * We ignore the result for the halt clear. - */ - - usb_reset_endpoint(sc->dev, endp); - - ub_state_stat(sc, cmd); - - } else if (cmd->state == UB_CMDST_CLRRS) { - if (urb->status == -EPIPE) { - printk(KERN_NOTICE "%s: stall on control pipe\n", - sc->name); - goto Bad_End; - } - - /* - * We ignore the result for the halt clear. - */ - - usb_reset_endpoint(sc->dev, endp); - - ub_state_stat_counted(sc, cmd); - - } else if (cmd->state == UB_CMDST_CMD) { - switch (urb->status) { - case 0: - break; - case -EOVERFLOW: - goto Bad_End; - case -EPIPE: - rc = ub_submit_clear_stall(sc, cmd, sc->last_pipe); - if (rc != 0) { - printk(KERN_NOTICE "%s: " - "unable to submit clear (%d)\n", - sc->name, rc); - /* - * This is typically ENOMEM or some other such shit. - * Retrying is pointless. Just do Bad End on it... - */ - ub_state_done(sc, cmd, rc); - return; - } - cmd->state = UB_CMDST_CLEAR; - return; - case -ESHUTDOWN: /* unplug */ - case -EILSEQ: /* unplug timeout on uhci */ - ub_state_done(sc, cmd, -ENODEV); - return; - default: - goto Bad_End; - } - if (urb->actual_length != US_BULK_CB_WRAP_LEN) { - goto Bad_End; - } - - if (cmd->dir == UB_DIR_NONE || cmd->nsg < 1) { - ub_state_stat(sc, cmd); - return; - } - - // udelay(125); // usb-storage has this - ub_data_start(sc, cmd); - - } else if (cmd->state == UB_CMDST_DATA) { - if (urb->status == -EPIPE) { - rc = ub_submit_clear_stall(sc, cmd, sc->last_pipe); - if (rc != 0) { - printk(KERN_NOTICE "%s: " - "unable to submit clear (%d)\n", - sc->name, rc); - ub_state_done(sc, cmd, rc); - return; - } - cmd->state = UB_CMDST_CLR2STS; - return; - } - if (urb->status == -EOVERFLOW) { - /* - * A babble? Failure, but we must transfer CSW now. - */ - cmd->error = -EOVERFLOW; /* A cheap trick... */ - ub_state_stat(sc, cmd); - return; - } - - if (cmd->dir == UB_DIR_WRITE) { - /* - * Do not continue writes in case of a failure. - * Doing so would cause sectors to be mixed up, - * which is worse than sectors lost. - * - * We must try to read the CSW, or many devices - * get confused. - */ - len = urb->actual_length; - if (urb->status != 0 || - len != cmd->sgv[cmd->current_sg].length) { - cmd->act_len += len; - - cmd->error = -EIO; - ub_state_stat(sc, cmd); - return; - } - - } else { - /* - * If an error occurs on read, we record it, and - * continue to fetch data in order to avoid bubble. - * - * As a small shortcut, we stop if we detect that - * a CSW mixed into data. - */ - if (urb->status != 0) - cmd->error = -EIO; - - len = urb->actual_length; - if (urb->status != 0 || - len != cmd->sgv[cmd->current_sg].length) { - if ((len & 0x1FF) == US_BULK_CS_WRAP_LEN) - goto Bad_End; - } - } - - cmd->act_len += urb->actual_length; - - if (++cmd->current_sg < cmd->nsg) { - ub_data_start(sc, cmd); - return; - } - ub_state_stat(sc, cmd); - - } else if (cmd->state == UB_CMDST_STAT) { - if (urb->status == -EPIPE) { - rc = ub_submit_clear_stall(sc, cmd, sc->last_pipe); - if (rc != 0) { - printk(KERN_NOTICE "%s: " - "unable to submit clear (%d)\n", - sc->name, rc); - ub_state_done(sc, cmd, rc); - return; - } - - /* - * Having a stall when getting CSW is an error, so - * make sure uppper levels are not oblivious to it. - */ - cmd->error = -EIO; /* A cheap trick... */ - - cmd->state = UB_CMDST_CLRRS; - return; - } - - /* Catch everything, including -EOVERFLOW and other nasties. */ - if (urb->status != 0) - goto Bad_End; - - if (urb->actual_length == 0) { - ub_state_stat_counted(sc, cmd); - return; - } - - /* - * Check the returned Bulk protocol status. - * The status block has to be validated first. - */ - - bcs = &sc->work_bcs; - - if (sc->signature == cpu_to_le32(0)) { - /* - * This is the first reply, so do not perform the check. - * Instead, remember the signature the device uses - * for future checks. But do not allow a nul. - */ - sc->signature = bcs->Signature; - if (sc->signature == cpu_to_le32(0)) { - ub_state_stat_counted(sc, cmd); - return; - } - } else { - if (bcs->Signature != sc->signature) { - ub_state_stat_counted(sc, cmd); - return; - } - } - - if (bcs->Tag != cmd->tag) { - /* - * This usually happens when we disagree with the - * device's microcode about something. For instance, - * a few of them throw this after timeouts. They buffer - * commands and reply at commands we timed out before. - * Without flushing these replies we loop forever. - */ - ub_state_stat_counted(sc, cmd); - return; - } - - if (!sc->bad_resid) { - len = le32_to_cpu(bcs->Residue); - if (len != cmd->len - cmd->act_len) { - /* - * Only start ignoring if this cmd ended well. - */ - if (cmd->len == cmd->act_len) { - printk(KERN_NOTICE "%s: " - "bad residual %d of %d, ignoring\n", - sc->name, len, cmd->len); - sc->bad_resid = 1; - } - } - } - - switch (bcs->Status) { - case US_BULK_STAT_OK: - break; - case US_BULK_STAT_FAIL: - ub_state_sense(sc, cmd); - return; - case US_BULK_STAT_PHASE: - goto Bad_End; - default: - printk(KERN_INFO "%s: unknown CSW status 0x%x\n", - sc->name, bcs->Status); - ub_state_done(sc, cmd, -EINVAL); - return; - } - - /* Not zeroing error to preserve a babble indicator */ - if (cmd->error != 0) { - ub_state_sense(sc, cmd); - return; - } - cmd->state = UB_CMDST_DONE; - ub_cmdq_pop(sc); - (*cmd->done)(sc, cmd); - - } else if (cmd->state == UB_CMDST_SENSE) { - ub_state_done(sc, cmd, -EIO); - - } else { - printk(KERN_WARNING "%s: wrong command state %d\n", - sc->name, cmd->state); - ub_state_done(sc, cmd, -EINVAL); - return; - } - return; - -Bad_End: /* Little Excel is dead */ - ub_state_done(sc, cmd, -EIO); -} - -/* - * Factorization helper for the command state machine: - * Initiate a data segment transfer. - */ -static void ub_data_start(struct ub_dev *sc, struct ub_scsi_cmd *cmd) -{ - struct scatterlist *sg = &cmd->sgv[cmd->current_sg]; - int pipe; - int rc; - - UB_INIT_COMPLETION(sc->work_done); - - if (cmd->dir == UB_DIR_READ) - pipe = sc->recv_bulk_pipe; - else - pipe = sc->send_bulk_pipe; - sc->last_pipe = pipe; - usb_fill_bulk_urb(&sc->work_urb, sc->dev, pipe, sg_virt(sg), - sg->length, ub_urb_complete, sc); - - if ((rc = usb_submit_urb(&sc->work_urb, GFP_ATOMIC)) != 0) { - /* XXX Clear stalls */ - ub_complete(&sc->work_done); - ub_state_done(sc, cmd, rc); - return; - } - - if (cmd->timeo) - sc->work_timer.expires = jiffies + cmd->timeo; - else - sc->work_timer.expires = jiffies + UB_DATA_TIMEOUT; - add_timer(&sc->work_timer); - - cmd->state = UB_CMDST_DATA; -} - -/* - * Factorization helper for the command state machine: - * Finish the command. - */ -static void ub_state_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd, int rc) -{ - - cmd->error = rc; - cmd->state = UB_CMDST_DONE; - ub_cmdq_pop(sc); - (*cmd->done)(sc, cmd); -} - -/* - * Factorization helper for the command state machine: - * Submit a CSW read. - */ -static int __ub_state_stat(struct ub_dev *sc, struct ub_scsi_cmd *cmd) -{ - int rc; - - UB_INIT_COMPLETION(sc->work_done); - - sc->last_pipe = sc->recv_bulk_pipe; - usb_fill_bulk_urb(&sc->work_urb, sc->dev, sc->recv_bulk_pipe, - &sc->work_bcs, US_BULK_CS_WRAP_LEN, ub_urb_complete, sc); - - if ((rc = usb_submit_urb(&sc->work_urb, GFP_ATOMIC)) != 0) { - /* XXX Clear stalls */ - ub_complete(&sc->work_done); - ub_state_done(sc, cmd, rc); - return -1; - } - - if (cmd->timeo) - sc->work_timer.expires = jiffies + cmd->timeo; - else - sc->work_timer.expires = jiffies + UB_STAT_TIMEOUT; - add_timer(&sc->work_timer); - return 0; -} - -/* - * Factorization helper for the command state machine: - * Submit a CSW read and go to STAT state. - */ -static void ub_state_stat(struct ub_dev *sc, struct ub_scsi_cmd *cmd) -{ - - if (__ub_state_stat(sc, cmd) != 0) - return; - - cmd->stat_count = 0; - cmd->state = UB_CMDST_STAT; -} - -/* - * Factorization helper for the command state machine: - * Submit a CSW read and go to STAT state with counter (along [C] path). - */ -static void ub_state_stat_counted(struct ub_dev *sc, struct ub_scsi_cmd *cmd) -{ - - if (++cmd->stat_count >= 4) { - ub_state_sense(sc, cmd); - return; - } - - if (__ub_state_stat(sc, cmd) != 0) - return; - - cmd->state = UB_CMDST_STAT; -} - -/* - * Factorization helper for the command state machine: - * Submit a REQUEST SENSE and go to SENSE state. - */ -static void ub_state_sense(struct ub_dev *sc, struct ub_scsi_cmd *cmd) -{ - struct ub_scsi_cmd *scmd; - struct scatterlist *sg; - int rc; - - if (cmd->cdb[0] == REQUEST_SENSE) { - rc = -EPIPE; - goto error; - } - - scmd = &sc->top_rqs_cmd; - memset(scmd, 0, sizeof(struct ub_scsi_cmd)); - scmd->cdb[0] = REQUEST_SENSE; - scmd->cdb[4] = UB_SENSE_SIZE; - scmd->cdb_len = 6; - scmd->dir = UB_DIR_READ; - scmd->state = UB_CMDST_INIT; - scmd->nsg = 1; - sg = &scmd->sgv[0]; - sg_init_table(sg, UB_MAX_REQ_SG); - sg_set_page(sg, virt_to_page(sc->top_sense), UB_SENSE_SIZE, - (unsigned long)sc->top_sense & (PAGE_SIZE-1)); - scmd->len = UB_SENSE_SIZE; - scmd->lun = cmd->lun; - scmd->done = ub_top_sense_done; - scmd->back = cmd; - - scmd->tag = sc->tagcnt++; - - cmd->state = UB_CMDST_SENSE; - - ub_cmdq_insert(sc, scmd); - return; - -error: - ub_state_done(sc, cmd, rc); -} - -/* - * A helper for the command's state machine: - * Submit a stall clear. - */ -static int ub_submit_clear_stall(struct ub_dev *sc, struct ub_scsi_cmd *cmd, - int stalled_pipe) -{ - int endp; - struct usb_ctrlrequest *cr; - int rc; - - endp = usb_pipeendpoint(stalled_pipe); - if (usb_pipein (stalled_pipe)) - endp |= USB_DIR_IN; - - cr = &sc->work_cr; - cr->bRequestType = USB_RECIP_ENDPOINT; - cr->bRequest = USB_REQ_CLEAR_FEATURE; - cr->wValue = cpu_to_le16(USB_ENDPOINT_HALT); - cr->wIndex = cpu_to_le16(endp); - cr->wLength = cpu_to_le16(0); - - UB_INIT_COMPLETION(sc->work_done); - - usb_fill_control_urb(&sc->work_urb, sc->dev, sc->send_ctrl_pipe, - (unsigned char*) cr, NULL, 0, ub_urb_complete, sc); - - if ((rc = usb_submit_urb(&sc->work_urb, GFP_ATOMIC)) != 0) { - ub_complete(&sc->work_done); - return rc; - } - - sc->work_timer.expires = jiffies + UB_CTRL_TIMEOUT; - add_timer(&sc->work_timer); - return 0; -} - -/* - */ -static void ub_top_sense_done(struct ub_dev *sc, struct ub_scsi_cmd *scmd) -{ - unsigned char *sense = sc->top_sense; - struct ub_scsi_cmd *cmd; - - /* - * Find the command which triggered the unit attention or a check, - * save the sense into it, and advance its state machine. - */ - if ((cmd = ub_cmdq_peek(sc)) == NULL) { - printk(KERN_WARNING "%s: sense done while idle\n", sc->name); - return; - } - if (cmd != scmd->back) { - printk(KERN_WARNING "%s: " - "sense done for wrong command 0x%x\n", - sc->name, cmd->tag); - return; - } - if (cmd->state != UB_CMDST_SENSE) { - printk(KERN_WARNING "%s: sense done with bad cmd state %d\n", - sc->name, cmd->state); - return; - } - - /* - * Ignoring scmd->act_len, because the buffer was pre-zeroed. - */ - cmd->key = sense[2] & 0x0F; - cmd->asc = sense[12]; - cmd->ascq = sense[13]; - - ub_scsi_urb_compl(sc, cmd); -} - -/* - * Reset management - */ - -static void ub_reset_enter(struct ub_dev *sc, int try) -{ - - if (sc->reset) { - /* This happens often on multi-LUN devices. */ - return; - } - sc->reset = try + 1; - -#if 0 /* Not needed because the disconnect waits for us. */ - unsigned long flags; - spin_lock_irqsave(&ub_lock, flags); - sc->openc++; - spin_unlock_irqrestore(&ub_lock, flags); -#endif - -#if 0 /* We let them stop themselves. */ - struct ub_lun *lun; - list_for_each_entry(lun, &sc->luns, link) { - blk_stop_queue(lun->disk->queue); - } -#endif - - schedule_work(&sc->reset_work); -} - -static void ub_reset_task(struct work_struct *work) -{ - struct ub_dev *sc = container_of(work, struct ub_dev, reset_work); - unsigned long flags; - struct ub_lun *lun; - int rc; - - if (!sc->reset) { - printk(KERN_WARNING "%s: Running reset unrequested\n", - sc->name); - return; - } - - if (atomic_read(&sc->poison)) { - ; - } else if ((sc->reset & 1) == 0) { - ub_sync_reset(sc); - msleep(700); /* usb-storage sleeps 6s (!) */ - ub_probe_clear_stall(sc, sc->recv_bulk_pipe); - ub_probe_clear_stall(sc, sc->send_bulk_pipe); - } else if (sc->dev->actconfig->desc.bNumInterfaces != 1) { - ; - } else { - rc = usb_lock_device_for_reset(sc->dev, sc->intf); - if (rc < 0) { - printk(KERN_NOTICE - "%s: usb_lock_device_for_reset failed (%d)\n", - sc->name, rc); - } else { - rc = usb_reset_device(sc->dev); - if (rc < 0) { - printk(KERN_NOTICE "%s: " - "usb_lock_device_for_reset failed (%d)\n", - sc->name, rc); - } - usb_unlock_device(sc->dev); - } - } - - /* - * In theory, no commands can be running while reset is active, - * so nobody can ask for another reset, and so we do not need any - * queues of resets or anything. We do need a spinlock though, - * to interact with block layer. - */ - spin_lock_irqsave(sc->lock, flags); - sc->reset = 0; - tasklet_schedule(&sc->tasklet); - list_for_each_entry(lun, &sc->luns, link) { - blk_start_queue(lun->disk->queue); - } - wake_up(&sc->reset_wait); - spin_unlock_irqrestore(sc->lock, flags); -} - -/* - * XXX Reset brackets are too much hassle to implement, so just stub them - * in order to prevent forced unbinding (which deadlocks solid when our - * ->disconnect method waits for the reset to complete and this kills keventd). - * - * XXX Tell Alan to move usb_unlock_device inside of usb_reset_device, - * or else the post_reset is invoked, and restats I/O on a locked device. - */ -static int ub_pre_reset(struct usb_interface *iface) { - return 0; -} - -static int ub_post_reset(struct usb_interface *iface) { - return 0; -} - -/* - * This is called from a process context. - */ -static void ub_revalidate(struct ub_dev *sc, struct ub_lun *lun) -{ - - lun->readonly = 0; /* XXX Query this from the device */ - - lun->capacity.nsec = 0; - lun->capacity.bsize = 512; - lun->capacity.bshift = 0; - - if (ub_sync_tur(sc, lun) != 0) - return; /* Not ready */ - lun->changed = 0; - - if (ub_sync_read_cap(sc, lun, &lun->capacity) != 0) { - /* - * The retry here means something is wrong, either with the - * device, with the transport, or with our code. - * We keep this because sd.c has retries for capacity. - */ - if (ub_sync_read_cap(sc, lun, &lun->capacity) != 0) { - lun->capacity.nsec = 0; - lun->capacity.bsize = 512; - lun->capacity.bshift = 0; - } - } -} - -/* - * The open funcion. - * This is mostly needed to keep refcounting, but also to support - * media checks on removable media drives. - */ -static int ub_bd_open(struct block_device *bdev, fmode_t mode) -{ - struct ub_lun *lun = bdev->bd_disk->private_data; - struct ub_dev *sc = lun->udev; - unsigned long flags; - int rc; - - spin_lock_irqsave(&ub_lock, flags); - if (atomic_read(&sc->poison)) { - spin_unlock_irqrestore(&ub_lock, flags); - return -ENXIO; - } - sc->openc++; - spin_unlock_irqrestore(&ub_lock, flags); - - if (lun->removable || lun->readonly) - check_disk_change(bdev); - - /* - * The sd.c considers ->media_present and ->changed not equivalent, - * under some pretty murky conditions (a failure of READ CAPACITY). - * We may need it one day. - */ - if (lun->removable && lun->changed && !(mode & FMODE_NDELAY)) { - rc = -ENOMEDIUM; - goto err_open; - } - - if (lun->readonly && (mode & FMODE_WRITE)) { - rc = -EROFS; - goto err_open; - } - - return 0; - -err_open: - ub_put(sc); - return rc; -} - -static int ub_bd_unlocked_open(struct block_device *bdev, fmode_t mode) -{ - int ret; - - mutex_lock(&ub_mutex); - ret = ub_bd_open(bdev, mode); - mutex_unlock(&ub_mutex); - - return ret; -} - - -/* - */ -static int ub_bd_release(struct gendisk *disk, fmode_t mode) -{ - struct ub_lun *lun = disk->private_data; - struct ub_dev *sc = lun->udev; - - mutex_lock(&ub_mutex); - ub_put(sc); - mutex_unlock(&ub_mutex); - - return 0; -} - -/* - * The ioctl interface. - */ -static int ub_bd_ioctl(struct block_device *bdev, fmode_t mode, - unsigned int cmd, unsigned long arg) -{ - void __user *usermem = (void __user *) arg; - int ret; - - mutex_lock(&ub_mutex); - ret = scsi_cmd_blk_ioctl(bdev, mode, cmd, usermem); - mutex_unlock(&ub_mutex); - - return ret; -} - -/* - * This is called by check_disk_change if we reported a media change. - * The main onjective here is to discover the features of the media such as - * the capacity, read-only status, etc. USB storage generally does not - * need to be spun up, but if we needed it, this would be the place. - * - * This call can sleep. - * - * The return code is not used. - */ -static int ub_bd_revalidate(struct gendisk *disk) -{ - struct ub_lun *lun = disk->private_data; - - ub_revalidate(lun->udev, lun); - - /* XXX Support sector size switching like in sr.c */ - blk_queue_logical_block_size(disk->queue, lun->capacity.bsize); - set_capacity(disk, lun->capacity.nsec); - // set_disk_ro(sdkp->disk, lun->readonly); - - return 0; -} - -/* - * The check is called by the block layer to verify if the media - * is still available. It is supposed to be harmless, lightweight and - * non-intrusive in case the media was not changed. - * - * This call can sleep. - * - * The return code is bool! - */ -static unsigned int ub_bd_check_events(struct gendisk *disk, - unsigned int clearing) -{ - struct ub_lun *lun = disk->private_data; - - if (!lun->removable) - return 0; - - /* - * We clean checks always after every command, so this is not - * as dangerous as it looks. If the TEST_UNIT_READY fails here, - * the device is actually not ready with operator or software - * intervention required. One dangerous item might be a drive which - * spins itself down, and come the time to write dirty pages, this - * will fail, then block layer discards the data. Since we never - * spin drives up, such devices simply cannot be used with ub anyway. - */ - if (ub_sync_tur(lun->udev, lun) != 0) { - lun->changed = 1; - return DISK_EVENT_MEDIA_CHANGE; - } - - return lun->changed ? DISK_EVENT_MEDIA_CHANGE : 0; -} - -static const struct block_device_operations ub_bd_fops = { - .owner = THIS_MODULE, - .open = ub_bd_unlocked_open, - .release = ub_bd_release, - .ioctl = ub_bd_ioctl, - .check_events = ub_bd_check_events, - .revalidate_disk = ub_bd_revalidate, -}; - -/* - * Common ->done routine for commands executed synchronously. - */ -static void ub_probe_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd) -{ - struct completion *cop = cmd->back; - complete(cop); -} - -/* - * Test if the device has a check condition on it, synchronously. - */ -static int ub_sync_tur(struct ub_dev *sc, struct ub_lun *lun) -{ - struct ub_scsi_cmd *cmd; - enum { ALLOC_SIZE = sizeof(struct ub_scsi_cmd) }; - unsigned long flags; - struct completion compl; - int rc; - - init_completion(&compl); - - rc = -ENOMEM; - if ((cmd = kzalloc(ALLOC_SIZE, GFP_KERNEL)) == NULL) - goto err_alloc; - - cmd->cdb[0] = TEST_UNIT_READY; - cmd->cdb_len = 6; - cmd->dir = UB_DIR_NONE; - cmd->state = UB_CMDST_INIT; - cmd->lun = lun; /* This may be NULL, but that's ok */ - cmd->done = ub_probe_done; - cmd->back = &compl; - - spin_lock_irqsave(sc->lock, flags); - cmd->tag = sc->tagcnt++; - - rc = ub_submit_scsi(sc, cmd); - spin_unlock_irqrestore(sc->lock, flags); - - if (rc != 0) - goto err_submit; - - wait_for_completion(&compl); - - rc = cmd->error; - - if (rc == -EIO && cmd->key != 0) /* Retries for benh's key */ - rc = cmd->key; - -err_submit: - kfree(cmd); -err_alloc: - return rc; -} - -/* - * Read the SCSI capacity synchronously (for probing). - */ -static int ub_sync_read_cap(struct ub_dev *sc, struct ub_lun *lun, - struct ub_capacity *ret) -{ - struct ub_scsi_cmd *cmd; - struct scatterlist *sg; - char *p; - enum { ALLOC_SIZE = sizeof(struct ub_scsi_cmd) + 8 }; - unsigned long flags; - unsigned int bsize, shift; - unsigned long nsec; - struct completion compl; - int rc; - - init_completion(&compl); - - rc = -ENOMEM; - if ((cmd = kzalloc(ALLOC_SIZE, GFP_KERNEL)) == NULL) - goto err_alloc; - p = (char *)cmd + sizeof(struct ub_scsi_cmd); - - cmd->cdb[0] = 0x25; - cmd->cdb_len = 10; - cmd->dir = UB_DIR_READ; - cmd->state = UB_CMDST_INIT; - cmd->nsg = 1; - sg = &cmd->sgv[0]; - sg_init_table(sg, UB_MAX_REQ_SG); - sg_set_page(sg, virt_to_page(p), 8, (unsigned long)p & (PAGE_SIZE-1)); - cmd->len = 8; - cmd->lun = lun; - cmd->done = ub_probe_done; - cmd->back = &compl; - - spin_lock_irqsave(sc->lock, flags); - cmd->tag = sc->tagcnt++; - - rc = ub_submit_scsi(sc, cmd); - spin_unlock_irqrestore(sc->lock, flags); - - if (rc != 0) - goto err_submit; - - wait_for_completion(&compl); - - if (cmd->error != 0) { - rc = -EIO; - goto err_read; - } - if (cmd->act_len != 8) { - rc = -EIO; - goto err_read; - } - - /* sd.c special-cases sector size of 0 to mean 512. Needed? Safe? */ - nsec = be32_to_cpu(*(__be32 *)p) + 1; - bsize = be32_to_cpu(*(__be32 *)(p + 4)); - switch (bsize) { - case 512: shift = 0; break; - case 1024: shift = 1; break; - case 2048: shift = 2; break; - case 4096: shift = 3; break; - default: - rc = -EDOM; - goto err_inv_bsize; - } - - ret->bsize = bsize; - ret->bshift = shift; - ret->nsec = nsec << shift; - rc = 0; - -err_inv_bsize: -err_read: -err_submit: - kfree(cmd); -err_alloc: - return rc; -} - -/* - */ -static void ub_probe_urb_complete(struct urb *urb) -{ - struct completion *cop = urb->context; - complete(cop); -} - -static void ub_probe_timeout(unsigned long arg) -{ - struct completion *cop = (struct completion *) arg; - complete(cop); -} - -/* - * Reset with a Bulk reset. - */ -static int ub_sync_reset(struct ub_dev *sc) -{ - int ifnum = sc->intf->cur_altsetting->desc.bInterfaceNumber; - struct usb_ctrlrequest *cr; - struct completion compl; - struct timer_list timer; - int rc; - - init_completion(&compl); - - cr = &sc->work_cr; - cr->bRequestType = USB_TYPE_CLASS | USB_RECIP_INTERFACE; - cr->bRequest = US_BULK_RESET_REQUEST; - cr->wValue = cpu_to_le16(0); - cr->wIndex = cpu_to_le16(ifnum); - cr->wLength = cpu_to_le16(0); - - usb_fill_control_urb(&sc->work_urb, sc->dev, sc->send_ctrl_pipe, - (unsigned char*) cr, NULL, 0, ub_probe_urb_complete, &compl); - - if ((rc = usb_submit_urb(&sc->work_urb, GFP_KERNEL)) != 0) { - printk(KERN_WARNING - "%s: Unable to submit a bulk reset (%d)\n", sc->name, rc); - return rc; - } - - init_timer(&timer); - timer.function = ub_probe_timeout; - timer.data = (unsigned long) &compl; - timer.expires = jiffies + UB_CTRL_TIMEOUT; - add_timer(&timer); - - wait_for_completion(&compl); - - del_timer_sync(&timer); - usb_kill_urb(&sc->work_urb); - - return sc->work_urb.status; -} - -/* - * Get number of LUNs by the way of Bulk GetMaxLUN command. - */ -static int ub_sync_getmaxlun(struct ub_dev *sc) -{ - int ifnum = sc->intf->cur_altsetting->desc.bInterfaceNumber; - unsigned char *p; - enum { ALLOC_SIZE = 1 }; - struct usb_ctrlrequest *cr; - struct completion compl; - struct timer_list timer; - int nluns; - int rc; - - init_completion(&compl); - - rc = -ENOMEM; - if ((p = kmalloc(ALLOC_SIZE, GFP_KERNEL)) == NULL) - goto err_alloc; - *p = 55; - - cr = &sc->work_cr; - cr->bRequestType = USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE; - cr->bRequest = US_BULK_GET_MAX_LUN; - cr->wValue = cpu_to_le16(0); - cr->wIndex = cpu_to_le16(ifnum); - cr->wLength = cpu_to_le16(1); - - usb_fill_control_urb(&sc->work_urb, sc->dev, sc->recv_ctrl_pipe, - (unsigned char*) cr, p, 1, ub_probe_urb_complete, &compl); - - if ((rc = usb_submit_urb(&sc->work_urb, GFP_KERNEL)) != 0) - goto err_submit; - - init_timer(&timer); - timer.function = ub_probe_timeout; - timer.data = (unsigned long) &compl; - timer.expires = jiffies + UB_CTRL_TIMEOUT; - add_timer(&timer); - - wait_for_completion(&compl); - - del_timer_sync(&timer); - usb_kill_urb(&sc->work_urb); - - if ((rc = sc->work_urb.status) < 0) - goto err_io; - - if (sc->work_urb.actual_length != 1) { - nluns = 0; - } else { - if ((nluns = *p) == 55) { - nluns = 0; - } else { - /* GetMaxLUN returns the maximum LUN number */ - nluns += 1; - if (nluns > UB_MAX_LUNS) - nluns = UB_MAX_LUNS; - } - } - - kfree(p); - return nluns; - -err_io: -err_submit: - kfree(p); -err_alloc: - return rc; -} - -/* - * Clear initial stalls. - */ -static int ub_probe_clear_stall(struct ub_dev *sc, int stalled_pipe) -{ - int endp; - struct usb_ctrlrequest *cr; - struct completion compl; - struct timer_list timer; - int rc; - - init_completion(&compl); - - endp = usb_pipeendpoint(stalled_pipe); - if (usb_pipein (stalled_pipe)) - endp |= USB_DIR_IN; - - cr = &sc->work_cr; - cr->bRequestType = USB_RECIP_ENDPOINT; - cr->bRequest = USB_REQ_CLEAR_FEATURE; - cr->wValue = cpu_to_le16(USB_ENDPOINT_HALT); - cr->wIndex = cpu_to_le16(endp); - cr->wLength = cpu_to_le16(0); - - usb_fill_control_urb(&sc->work_urb, sc->dev, sc->send_ctrl_pipe, - (unsigned char*) cr, NULL, 0, ub_probe_urb_complete, &compl); - - if ((rc = usb_submit_urb(&sc->work_urb, GFP_KERNEL)) != 0) { - printk(KERN_WARNING - "%s: Unable to submit a probe clear (%d)\n", sc->name, rc); - return rc; - } - - init_timer(&timer); - timer.function = ub_probe_timeout; - timer.data = (unsigned long) &compl; - timer.expires = jiffies + UB_CTRL_TIMEOUT; - add_timer(&timer); - - wait_for_completion(&compl); - - del_timer_sync(&timer); - usb_kill_urb(&sc->work_urb); - - usb_reset_endpoint(sc->dev, endp); - - return 0; -} - -/* - * Get the pipe settings. - */ -static int ub_get_pipes(struct ub_dev *sc, struct usb_device *dev, - struct usb_interface *intf) -{ - struct usb_host_interface *altsetting = intf->cur_altsetting; - struct usb_endpoint_descriptor *ep_in = NULL; - struct usb_endpoint_descriptor *ep_out = NULL; - struct usb_endpoint_descriptor *ep; - int i; - - /* - * Find the endpoints we need. - * We are expecting a minimum of 2 endpoints - in and out (bulk). - * We will ignore any others. - */ - for (i = 0; i < altsetting->desc.bNumEndpoints; i++) { - ep = &altsetting->endpoint[i].desc; - - /* Is it a BULK endpoint? */ - if (usb_endpoint_xfer_bulk(ep)) { - /* BULK in or out? */ - if (usb_endpoint_dir_in(ep)) { - if (ep_in == NULL) - ep_in = ep; - } else { - if (ep_out == NULL) - ep_out = ep; - } - } - } - - if (ep_in == NULL || ep_out == NULL) { - printk(KERN_NOTICE "%s: failed endpoint check\n", sc->name); - return -ENODEV; - } - - /* Calculate and store the pipe values */ - sc->send_ctrl_pipe = usb_sndctrlpipe(dev, 0); - sc->recv_ctrl_pipe = usb_rcvctrlpipe(dev, 0); - sc->send_bulk_pipe = usb_sndbulkpipe(dev, - usb_endpoint_num(ep_out)); - sc->recv_bulk_pipe = usb_rcvbulkpipe(dev, - usb_endpoint_num(ep_in)); - - return 0; -} - -/* - * Probing is done in the process context, which allows us to cheat - * and not to build a state machine for the discovery. - */ -static int ub_probe(struct usb_interface *intf, - const struct usb_device_id *dev_id) -{ - struct ub_dev *sc; - int nluns; - int rc; - int i; - - if (usb_usual_check_type(dev_id, USB_US_TYPE_UB)) - return -ENXIO; - - rc = -ENOMEM; - if ((sc = kzalloc(sizeof(struct ub_dev), GFP_KERNEL)) == NULL) - goto err_core; - sc->lock = ub_next_lock(); - INIT_LIST_HEAD(&sc->luns); - usb_init_urb(&sc->work_urb); - tasklet_init(&sc->tasklet, ub_scsi_action, (unsigned long)sc); - atomic_set(&sc->poison, 0); - INIT_WORK(&sc->reset_work, ub_reset_task); - init_waitqueue_head(&sc->reset_wait); - - init_timer(&sc->work_timer); - sc->work_timer.data = (unsigned long) sc; - sc->work_timer.function = ub_urb_timeout; - - ub_init_completion(&sc->work_done); - sc->work_done.done = 1; /* A little yuk, but oh well... */ - - sc->dev = interface_to_usbdev(intf); - sc->intf = intf; - // sc->ifnum = intf->cur_altsetting->desc.bInterfaceNumber; - usb_set_intfdata(intf, sc); - usb_get_dev(sc->dev); - /* - * Since we give the interface struct to the block level through - * disk->driverfs_dev, we have to pin it. Otherwise, block_uevent - * oopses on close after a disconnect (kernels 2.6.16 and up). - */ - usb_get_intf(sc->intf); - - snprintf(sc->name, 12, DRV_NAME "(%d.%d)", - sc->dev->bus->busnum, sc->dev->devnum); - - /* XXX Verify that we can handle the device (from descriptors) */ - - if (ub_get_pipes(sc, sc->dev, intf) != 0) - goto err_dev_desc; - - /* - * At this point, all USB initialization is done, do upper layer. - * We really hate halfway initialized structures, so from the - * invariants perspective, this ub_dev is fully constructed at - * this point. - */ - - /* - * This is needed to clear toggles. It is a problem only if we do - * `rmmod ub && modprobe ub` without disconnects, but we like that. - */ -#if 0 /* iPod Mini fails if we do this (big white iPod works) */ - ub_probe_clear_stall(sc, sc->recv_bulk_pipe); - ub_probe_clear_stall(sc, sc->send_bulk_pipe); -#endif - - /* - * The way this is used by the startup code is a little specific. - * A SCSI check causes a USB stall. Our common case code sees it - * and clears the check, after which the device is ready for use. - * But if a check was not present, any command other than - * TEST_UNIT_READY ends with a lockup (including REQUEST_SENSE). - * - * If we neglect to clear the SCSI check, the first real command fails - * (which is the capacity readout). We clear that and retry, but why - * causing spurious retries for no reason. - * - * Revalidation may start with its own TEST_UNIT_READY, but that one - * has to succeed, so we clear checks with an additional one here. - * In any case it's not our business how revaliadation is implemented. - */ - for (i = 0; i < 3; i++) { /* Retries for the schwag key from KS'04 */ - if ((rc = ub_sync_tur(sc, NULL)) <= 0) break; - if (rc != 0x6) break; - msleep(10); - } - - nluns = 1; - for (i = 0; i < 3; i++) { - if ((rc = ub_sync_getmaxlun(sc)) < 0) - break; - if (rc != 0) { - nluns = rc; - break; - } - msleep(100); - } - - for (i = 0; i < nluns; i++) { - ub_probe_lun(sc, i); - } - return 0; - -err_dev_desc: - usb_set_intfdata(intf, NULL); - usb_put_intf(sc->intf); - usb_put_dev(sc->dev); - kfree(sc); -err_core: - return rc; -} - -static int ub_probe_lun(struct ub_dev *sc, int lnum) -{ - struct ub_lun *lun; - struct request_queue *q; - struct gendisk *disk; - int rc; - - rc = -ENOMEM; - if ((lun = kzalloc(sizeof(struct ub_lun), GFP_KERNEL)) == NULL) - goto err_alloc; - lun->num = lnum; - - rc = -ENOSR; - if ((lun->id = ub_id_get()) == -1) - goto err_id; - - lun->udev = sc; - - snprintf(lun->name, 16, DRV_NAME "%c(%d.%d.%d)", - lun->id + 'a', sc->dev->bus->busnum, sc->dev->devnum, lun->num); - - lun->removable = 1; /* XXX Query this from the device */ - lun->changed = 1; /* ub_revalidate clears only */ - ub_revalidate(sc, lun); - - rc = -ENOMEM; - if ((disk = alloc_disk(UB_PARTS_PER_LUN)) == NULL) - goto err_diskalloc; - - sprintf(disk->disk_name, DRV_NAME "%c", lun->id + 'a'); - disk->major = UB_MAJOR; - disk->first_minor = lun->id * UB_PARTS_PER_LUN; - disk->fops = &ub_bd_fops; - disk->private_data = lun; - disk->driverfs_dev = &sc->intf->dev; - - rc = -ENOMEM; - if ((q = blk_init_queue(ub_request_fn, sc->lock)) == NULL) - goto err_blkqinit; - - disk->queue = q; - - blk_queue_bounce_limit(q, BLK_BOUNCE_HIGH); - blk_queue_max_segments(q, UB_MAX_REQ_SG); - blk_queue_segment_boundary(q, 0xffffffff); /* Dubious. */ - blk_queue_max_hw_sectors(q, UB_MAX_SECTORS); - blk_queue_logical_block_size(q, lun->capacity.bsize); - - lun->disk = disk; - q->queuedata = lun; - list_add(&lun->link, &sc->luns); - - set_capacity(disk, lun->capacity.nsec); - if (lun->removable) - disk->flags |= GENHD_FL_REMOVABLE; - - add_disk(disk); - - return 0; - -err_blkqinit: - put_disk(disk); -err_diskalloc: - ub_id_put(lun->id); -err_id: - kfree(lun); -err_alloc: - return rc; -} - -static void ub_disconnect(struct usb_interface *intf) -{ - struct ub_dev *sc = usb_get_intfdata(intf); - struct ub_lun *lun; - unsigned long flags; - - /* - * Prevent ub_bd_release from pulling the rug from under us. - * XXX This is starting to look like a kref. - * XXX Why not to take this ref at probe time? - */ - spin_lock_irqsave(&ub_lock, flags); - sc->openc++; - spin_unlock_irqrestore(&ub_lock, flags); - - /* - * Fence stall clearings, operations triggered by unlinkings and so on. - * We do not attempt to unlink any URBs, because we do not trust the - * unlink paths in HC drivers. Also, we get -84 upon disconnect anyway. - */ - atomic_set(&sc->poison, 1); - - /* - * Wait for reset to end, if any. - */ - wait_event(sc->reset_wait, !sc->reset); - - /* - * Blow away queued commands. - * - * Actually, this never works, because before we get here - * the HCD terminates outstanding URB(s). It causes our - * SCSI command queue to advance, commands fail to submit, - * and the whole queue drains. So, we just use this code to - * print warnings. - */ - spin_lock_irqsave(sc->lock, flags); - { - struct ub_scsi_cmd *cmd; - int cnt = 0; - while ((cmd = ub_cmdq_peek(sc)) != NULL) { - cmd->error = -ENOTCONN; - cmd->state = UB_CMDST_DONE; - ub_cmdq_pop(sc); - (*cmd->done)(sc, cmd); - cnt++; - } - if (cnt != 0) { - printk(KERN_WARNING "%s: " - "%d was queued after shutdown\n", sc->name, cnt); - } - } - spin_unlock_irqrestore(sc->lock, flags); - - /* - * Unregister the upper layer. - */ - list_for_each_entry(lun, &sc->luns, link) { - del_gendisk(lun->disk); - /* - * I wish I could do: - * queue_flag_set(QUEUE_FLAG_DEAD, q); - * As it is, we rely on our internal poisoning and let - * the upper levels to spin furiously failing all the I/O. - */ - } - - /* - * Testing for -EINPROGRESS is always a bug, so we are bending - * the rules a little. - */ - spin_lock_irqsave(sc->lock, flags); - if (sc->work_urb.status == -EINPROGRESS) { /* janitors: ignore */ - printk(KERN_WARNING "%s: " - "URB is active after disconnect\n", sc->name); - } - spin_unlock_irqrestore(sc->lock, flags); - - /* - * There is virtually no chance that other CPU runs a timeout so long - * after ub_urb_complete should have called del_timer, but only if HCD - * didn't forget to deliver a callback on unlink. - */ - del_timer_sync(&sc->work_timer); - - /* - * At this point there must be no commands coming from anyone - * and no URBs left in transit. - */ - - ub_put(sc); -} - -static struct usb_driver ub_driver = { - .name = "ub", - .probe = ub_probe, - .disconnect = ub_disconnect, - .id_table = ub_usb_ids, - .pre_reset = ub_pre_reset, - .post_reset = ub_post_reset, -}; - -static int __init ub_init(void) -{ - int rc; - int i; - - pr_info("'Low Performance USB Block' driver is deprecated. " - "Please switch to usb-storage\n"); - for (i = 0; i < UB_QLOCK_NUM; i++) - spin_lock_init(&ub_qlockv[i]); - - if ((rc = register_blkdev(UB_MAJOR, DRV_NAME)) != 0) - goto err_regblkdev; - - if ((rc = usb_register(&ub_driver)) != 0) - goto err_register; - - usb_usual_set_present(USB_US_TYPE_UB); - return 0; - -err_register: - unregister_blkdev(UB_MAJOR, DRV_NAME); -err_regblkdev: - return rc; -} - -static void __exit ub_exit(void) -{ - usb_deregister(&ub_driver); - - unregister_blkdev(UB_MAJOR, DRV_NAME); - usb_usual_clear_present(USB_US_TYPE_UB); -} - -module_init(ub_init); -module_exit(ub_exit); - -MODULE_LICENSE("GPL"); diff --git a/drivers/staging/ccg/Kconfig b/drivers/staging/ccg/Kconfig index 8598111eb0b1..8997a8c757aa 100644 --- a/drivers/staging/ccg/Kconfig +++ b/drivers/staging/ccg/Kconfig @@ -17,4 +17,9 @@ config USB_G_CCG Configurable Composite Gadget can be compiled "M" only or not at all. + BIG FAT NOTE: DON'T RELY ON THIS USERINTERFACE HERE! AS PART + OF THE REWORK DONE HERE WILL BE A NEW USER INTERFACE WITHOUT ANY + COMPATIBILITY TO THIS SYSFS INTERFACE HERE. BE AWARE OF THIS + BEFORE SELECTING THIS. + endif # USB_GADGET diff --git a/drivers/staging/ccg/Makefile b/drivers/staging/ccg/Makefile index 693da637a6d8..814fa9de5f57 100644 --- a/drivers/staging/ccg/Makefile +++ b/drivers/staging/ccg/Makefile @@ -1,4 +1,2 @@ g_ccg-y := ccg.o -ccflags-y += -Idrivers/usb/gadget - obj-$(CONFIG_USB_G_CCG) += g_ccg.o diff --git a/drivers/staging/ccg/ccg.c b/drivers/staging/ccg/ccg.c index 3fbb300cbe30..93e1e2ffca0c 100644 --- a/drivers/staging/ccg/ccg.c +++ b/drivers/staging/ccg/ccg.c @@ -32,7 +32,7 @@ #include <linux/platform_device.h> #include <linux/usb/ch9.h> -#include <linux/usb/composite.h> +#include "composite.h" #include <linux/usb/gadget.h> #include "gadget_chips.h" @@ -44,19 +44,19 @@ * the runtime footprint, and giving us at least some parts of what * a "gcc --combine ... part1.c part2.c part3.c ... " build would. */ -#include "../../usb/gadget/usbstring.c" -#include "../../usb/gadget/config.c" -#include "../../usb/gadget/epautoconf.c" -#include "../../usb/gadget/composite.c" - -#include "../../usb/gadget/f_mass_storage.c" -#include "../../usb/gadget/u_serial.c" -#include "../../usb/gadget/f_acm.c" +#include "usbstring.c" +#include "config.c" +#include "epautoconf.c" +#include "composite.c" + +#include "f_mass_storage.c" +#include "u_serial.c" +#include "f_acm.c" #define USB_ETH_RNDIS y -#include "../../usb/gadget/f_rndis.c" -#include "../../usb/gadget/rndis.c" -#include "../../usb/gadget/u_ether.c" -#include "../../usb/gadget/f_fs.c" +#include "f_rndis.c" +#include "rndis.c" +#include "u_ether.c" +#include "f_fs.c" MODULE_AUTHOR("Mike Lockwood, Andrzej Pietrasiewicz"); MODULE_DESCRIPTION("Configurable Composite USB Gadget"); @@ -1156,6 +1156,7 @@ static int ccg_usb_unbind(struct usb_composite_dev *cdev) static struct usb_composite_driver ccg_usb_driver = { .name = "configurable_usb", .dev = &device_desc, + .bind = ccg_bind, .unbind = ccg_usb_unbind, .needs_serial = true, .iManufacturer = "Linux Foundation", @@ -1271,7 +1272,7 @@ static int __init init(void) composite_driver.setup = ccg_setup; composite_driver.disconnect = ccg_disconnect; - err = usb_composite_probe(&ccg_usb_driver, ccg_bind); + err = usb_composite_probe(&ccg_usb_driver); if (err) { class_destroy(ccg_class); kfree(dev); diff --git a/drivers/staging/ccg/composite.c b/drivers/staging/ccg/composite.c new file mode 100644 index 000000000000..228b4574f228 --- /dev/null +++ b/drivers/staging/ccg/composite.c @@ -0,0 +1,1688 @@ +/* + * composite.c - infrastructure for Composite USB Gadgets + * + * Copyright (C) 2006-2008 David Brownell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +/* #define VERBOSE_DEBUG */ + +#include <linux/kallsyms.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/utsname.h> + +#include <linux/usb/composite.h> +#include <asm/unaligned.h> + +/* + * The code in this file is utility code, used to build a gadget driver + * from one or more "function" drivers, one or more "configuration" + * objects, and a "usb_composite_driver" by gluing them together along + * with the relevant device-wide data. + */ + +/* big enough to hold our biggest descriptor */ +#define USB_BUFSIZ 1024 + +static struct usb_composite_driver *composite; + +/* Some systems will need runtime overrides for the product identifiers + * published in the device descriptor, either numbers or strings or both. + * String parameters are in UTF-8 (superset of ASCII's 7 bit characters). + */ + +static ushort idVendor; +module_param(idVendor, ushort, 0644); +MODULE_PARM_DESC(idVendor, "USB Vendor ID"); + +static ushort idProduct; +module_param(idProduct, ushort, 0644); +MODULE_PARM_DESC(idProduct, "USB Product ID"); + +static ushort bcdDevice; +module_param(bcdDevice, ushort, 0644); +MODULE_PARM_DESC(bcdDevice, "USB Device version (BCD)"); + +static char *iManufacturer; +module_param(iManufacturer, charp, 0644); +MODULE_PARM_DESC(iManufacturer, "USB Manufacturer string"); + +static char *iProduct; +module_param(iProduct, charp, 0644); +MODULE_PARM_DESC(iProduct, "USB Product string"); + +static char *iSerialNumber; +module_param(iSerialNumber, charp, 0644); +MODULE_PARM_DESC(iSerialNumber, "SerialNumber string"); + +static char composite_manufacturer[50]; + +/*-------------------------------------------------------------------------*/ +/** + * next_ep_desc() - advance to the next EP descriptor + * @t: currect pointer within descriptor array + * + * Return: next EP descriptor or NULL + * + * Iterate over @t until either EP descriptor found or + * NULL (that indicates end of list) encountered + */ +static struct usb_descriptor_header** +next_ep_desc(struct usb_descriptor_header **t) +{ + for (; *t; t++) { + if ((*t)->bDescriptorType == USB_DT_ENDPOINT) + return t; + } + return NULL; +} + +/* + * for_each_ep_desc()- iterate over endpoint descriptors in the + * descriptors list + * @start: pointer within descriptor array. + * @ep_desc: endpoint descriptor to use as the loop cursor + */ +#define for_each_ep_desc(start, ep_desc) \ + for (ep_desc = next_ep_desc(start); \ + ep_desc; ep_desc = next_ep_desc(ep_desc+1)) + +/** + * config_ep_by_speed() - configures the given endpoint + * according to gadget speed. + * @g: pointer to the gadget + * @f: usb function + * @_ep: the endpoint to configure + * + * Return: error code, 0 on success + * + * This function chooses the right descriptors for a given + * endpoint according to gadget speed and saves it in the + * endpoint desc field. If the endpoint already has a descriptor + * assigned to it - overwrites it with currently corresponding + * descriptor. The endpoint maxpacket field is updated according + * to the chosen descriptor. + * Note: the supplied function should hold all the descriptors + * for supported speeds + */ +int config_ep_by_speed(struct usb_gadget *g, + struct usb_function *f, + struct usb_ep *_ep) +{ + struct usb_composite_dev *cdev = get_gadget_data(g); + struct usb_endpoint_descriptor *chosen_desc = NULL; + struct usb_descriptor_header **speed_desc = NULL; + + struct usb_ss_ep_comp_descriptor *comp_desc = NULL; + int want_comp_desc = 0; + + struct usb_descriptor_header **d_spd; /* cursor for speed desc */ + + if (!g || !f || !_ep) + return -EIO; + + /* select desired speed */ + switch (g->speed) { + case USB_SPEED_SUPER: + if (gadget_is_superspeed(g)) { + speed_desc = f->ss_descriptors; + want_comp_desc = 1; + break; + } + /* else: Fall trough */ + case USB_SPEED_HIGH: + if (gadget_is_dualspeed(g)) { + speed_desc = f->hs_descriptors; + break; + } + /* else: fall through */ + default: + speed_desc = f->descriptors; + } + /* find descriptors */ + for_each_ep_desc(speed_desc, d_spd) { + chosen_desc = (struct usb_endpoint_descriptor *)*d_spd; + if (chosen_desc->bEndpointAddress == _ep->address) + goto ep_found; + } + return -EIO; + +ep_found: + /* commit results */ + _ep->maxpacket = usb_endpoint_maxp(chosen_desc); + _ep->desc = chosen_desc; + _ep->comp_desc = NULL; + _ep->maxburst = 0; + _ep->mult = 0; + if (!want_comp_desc) + return 0; + + /* + * Companion descriptor should follow EP descriptor + * USB 3.0 spec, #9.6.7 + */ + comp_desc = (struct usb_ss_ep_comp_descriptor *)*(++d_spd); + if (!comp_desc || + (comp_desc->bDescriptorType != USB_DT_SS_ENDPOINT_COMP)) + return -EIO; + _ep->comp_desc = comp_desc; + if (g->speed == USB_SPEED_SUPER) { + switch (usb_endpoint_type(_ep->desc)) { + case USB_ENDPOINT_XFER_ISOC: + /* mult: bits 1:0 of bmAttributes */ + _ep->mult = comp_desc->bmAttributes & 0x3; + case USB_ENDPOINT_XFER_BULK: + case USB_ENDPOINT_XFER_INT: + _ep->maxburst = comp_desc->bMaxBurst + 1; + break; + default: + if (comp_desc->bMaxBurst != 0) + ERROR(cdev, "ep0 bMaxBurst must be 0\n"); + _ep->maxburst = 1; + break; + } + } + return 0; +} + +/** + * usb_add_function() - add a function to a configuration + * @config: the configuration + * @function: the function being added + * Context: single threaded during gadget setup + * + * After initialization, each configuration must have one or more + * functions added to it. Adding a function involves calling its @bind() + * method to allocate resources such as interface and string identifiers + * and endpoints. + * + * This function returns the value of the function's bind(), which is + * zero for success else a negative errno value. + */ +int usb_add_function(struct usb_configuration *config, + struct usb_function *function) +{ + int value = -EINVAL; + + DBG(config->cdev, "adding '%s'/%p to config '%s'/%p\n", + function->name, function, + config->label, config); + + if (!function->set_alt || !function->disable) + goto done; + + function->config = config; + list_add_tail(&function->list, &config->functions); + + /* REVISIT *require* function->bind? */ + if (function->bind) { + value = function->bind(config, function); + if (value < 0) { + list_del(&function->list); + function->config = NULL; + } + } else + value = 0; + + /* We allow configurations that don't work at both speeds. + * If we run into a lowspeed Linux system, treat it the same + * as full speed ... it's the function drivers that will need + * to avoid bulk and ISO transfers. + */ + if (!config->fullspeed && function->descriptors) + config->fullspeed = true; + if (!config->highspeed && function->hs_descriptors) + config->highspeed = true; + if (!config->superspeed && function->ss_descriptors) + config->superspeed = true; + +done: + if (value) + DBG(config->cdev, "adding '%s'/%p --> %d\n", + function->name, function, value); + return value; +} + +/** + * usb_function_deactivate - prevent function and gadget enumeration + * @function: the function that isn't yet ready to respond + * + * Blocks response of the gadget driver to host enumeration by + * preventing the data line pullup from being activated. This is + * normally called during @bind() processing to change from the + * initial "ready to respond" state, or when a required resource + * becomes available. + * + * For example, drivers that serve as a passthrough to a userspace + * daemon can block enumeration unless that daemon (such as an OBEX, + * MTP, or print server) is ready to handle host requests. + * + * Not all systems support software control of their USB peripheral + * data pullups. + * + * Returns zero on success, else negative errno. + */ +int usb_function_deactivate(struct usb_function *function) +{ + struct usb_composite_dev *cdev = function->config->cdev; + unsigned long flags; + int status = 0; + + spin_lock_irqsave(&cdev->lock, flags); + + if (cdev->deactivations == 0) + status = usb_gadget_disconnect(cdev->gadget); + if (status == 0) + cdev->deactivations++; + + spin_unlock_irqrestore(&cdev->lock, flags); + return status; +} + +/** + * usb_function_activate - allow function and gadget enumeration + * @function: function on which usb_function_activate() was called + * + * Reverses effect of usb_function_deactivate(). If no more functions + * are delaying their activation, the gadget driver will respond to + * host enumeration procedures. + * + * Returns zero on success, else negative errno. + */ +int usb_function_activate(struct usb_function *function) +{ + struct usb_composite_dev *cdev = function->config->cdev; + unsigned long flags; + int status = 0; + + spin_lock_irqsave(&cdev->lock, flags); + + if (WARN_ON(cdev->deactivations == 0)) + status = -EINVAL; + else { + cdev->deactivations--; + if (cdev->deactivations == 0) + status = usb_gadget_connect(cdev->gadget); + } + + spin_unlock_irqrestore(&cdev->lock, flags); + return status; +} + +/** + * usb_interface_id() - allocate an unused interface ID + * @config: configuration associated with the interface + * @function: function handling the interface + * Context: single threaded during gadget setup + * + * usb_interface_id() is called from usb_function.bind() callbacks to + * allocate new interface IDs. The function driver will then store that + * ID in interface, association, CDC union, and other descriptors. It + * will also handle any control requests targeted at that interface, + * particularly changing its altsetting via set_alt(). There may + * also be class-specific or vendor-specific requests to handle. + * + * All interface identifier should be allocated using this routine, to + * ensure that for example different functions don't wrongly assign + * different meanings to the same identifier. Note that since interface + * identifiers are configuration-specific, functions used in more than + * one configuration (or more than once in a given configuration) need + * multiple versions of the relevant descriptors. + * + * Returns the interface ID which was allocated; or -ENODEV if no + * more interface IDs can be allocated. + */ +int usb_interface_id(struct usb_configuration *config, + struct usb_function *function) +{ + unsigned id = config->next_interface_id; + + if (id < MAX_CONFIG_INTERFACES) { + config->interface[id] = function; + config->next_interface_id = id + 1; + return id; + } + return -ENODEV; +} + +static int config_buf(struct usb_configuration *config, + enum usb_device_speed speed, void *buf, u8 type) +{ + struct usb_config_descriptor *c = buf; + void *next = buf + USB_DT_CONFIG_SIZE; + int len = USB_BUFSIZ - USB_DT_CONFIG_SIZE; + struct usb_function *f; + int status; + + /* write the config descriptor */ + c = buf; + c->bLength = USB_DT_CONFIG_SIZE; + c->bDescriptorType = type; + /* wTotalLength is written later */ + c->bNumInterfaces = config->next_interface_id; + c->bConfigurationValue = config->bConfigurationValue; + c->iConfiguration = config->iConfiguration; + c->bmAttributes = USB_CONFIG_ATT_ONE | config->bmAttributes; + c->bMaxPower = config->bMaxPower ? : (CONFIG_USB_GADGET_VBUS_DRAW / 2); + + /* There may be e.g. OTG descriptors */ + if (config->descriptors) { + status = usb_descriptor_fillbuf(next, len, + config->descriptors); + if (status < 0) + return status; + len -= status; + next += status; + } + + /* add each function's descriptors */ + list_for_each_entry(f, &config->functions, list) { + struct usb_descriptor_header **descriptors; + + switch (speed) { + case USB_SPEED_SUPER: + descriptors = f->ss_descriptors; + break; + case USB_SPEED_HIGH: + descriptors = f->hs_descriptors; + break; + default: + descriptors = f->descriptors; + } + + if (!descriptors) + continue; + status = usb_descriptor_fillbuf(next, len, + (const struct usb_descriptor_header **) descriptors); + if (status < 0) + return status; + len -= status; + next += status; + } + + len = next - buf; + c->wTotalLength = cpu_to_le16(len); + return len; +} + +static int config_desc(struct usb_composite_dev *cdev, unsigned w_value) +{ + struct usb_gadget *gadget = cdev->gadget; + struct usb_configuration *c; + u8 type = w_value >> 8; + enum usb_device_speed speed = USB_SPEED_UNKNOWN; + + if (gadget->speed == USB_SPEED_SUPER) + speed = gadget->speed; + else if (gadget_is_dualspeed(gadget)) { + int hs = 0; + if (gadget->speed == USB_SPEED_HIGH) + hs = 1; + if (type == USB_DT_OTHER_SPEED_CONFIG) + hs = !hs; + if (hs) + speed = USB_SPEED_HIGH; + + } + + /* This is a lookup by config *INDEX* */ + w_value &= 0xff; + list_for_each_entry(c, &cdev->configs, list) { + /* ignore configs that won't work at this speed */ + switch (speed) { + case USB_SPEED_SUPER: + if (!c->superspeed) + continue; + break; + case USB_SPEED_HIGH: + if (!c->highspeed) + continue; + break; + default: + if (!c->fullspeed) + continue; + } + + if (w_value == 0) + return config_buf(c, speed, cdev->req->buf, type); + w_value--; + } + return -EINVAL; +} + +static int count_configs(struct usb_composite_dev *cdev, unsigned type) +{ + struct usb_gadget *gadget = cdev->gadget; + struct usb_configuration *c; + unsigned count = 0; + int hs = 0; + int ss = 0; + + if (gadget_is_dualspeed(gadget)) { + if (gadget->speed == USB_SPEED_HIGH) + hs = 1; + if (gadget->speed == USB_SPEED_SUPER) + ss = 1; + if (type == USB_DT_DEVICE_QUALIFIER) + hs = !hs; + } + list_for_each_entry(c, &cdev->configs, list) { + /* ignore configs that won't work at this speed */ + if (ss) { + if (!c->superspeed) + continue; + } else if (hs) { + if (!c->highspeed) + continue; + } else { + if (!c->fullspeed) + continue; + } + count++; + } + return count; +} + +/** + * bos_desc() - prepares the BOS descriptor. + * @cdev: pointer to usb_composite device to generate the bos + * descriptor for + * + * This function generates the BOS (Binary Device Object) + * descriptor and its device capabilities descriptors. The BOS + * descriptor should be supported by a SuperSpeed device. + */ +static int bos_desc(struct usb_composite_dev *cdev) +{ + struct usb_ext_cap_descriptor *usb_ext; + struct usb_ss_cap_descriptor *ss_cap; + struct usb_dcd_config_params dcd_config_params; + struct usb_bos_descriptor *bos = cdev->req->buf; + + bos->bLength = USB_DT_BOS_SIZE; + bos->bDescriptorType = USB_DT_BOS; + + bos->wTotalLength = cpu_to_le16(USB_DT_BOS_SIZE); + bos->bNumDeviceCaps = 0; + + /* + * A SuperSpeed device shall include the USB2.0 extension descriptor + * and shall support LPM when operating in USB2.0 HS mode. + */ + usb_ext = cdev->req->buf + le16_to_cpu(bos->wTotalLength); + bos->bNumDeviceCaps++; + le16_add_cpu(&bos->wTotalLength, USB_DT_USB_EXT_CAP_SIZE); + usb_ext->bLength = USB_DT_USB_EXT_CAP_SIZE; + usb_ext->bDescriptorType = USB_DT_DEVICE_CAPABILITY; + usb_ext->bDevCapabilityType = USB_CAP_TYPE_EXT; + usb_ext->bmAttributes = cpu_to_le32(USB_LPM_SUPPORT); + + /* + * The Superspeed USB Capability descriptor shall be implemented by all + * SuperSpeed devices. + */ + ss_cap = cdev->req->buf + le16_to_cpu(bos->wTotalLength); + bos->bNumDeviceCaps++; + le16_add_cpu(&bos->wTotalLength, USB_DT_USB_SS_CAP_SIZE); + ss_cap->bLength = USB_DT_USB_SS_CAP_SIZE; + ss_cap->bDescriptorType = USB_DT_DEVICE_CAPABILITY; + ss_cap->bDevCapabilityType = USB_SS_CAP_TYPE; + ss_cap->bmAttributes = 0; /* LTM is not supported yet */ + ss_cap->wSpeedSupported = cpu_to_le16(USB_LOW_SPEED_OPERATION | + USB_FULL_SPEED_OPERATION | + USB_HIGH_SPEED_OPERATION | + USB_5GBPS_OPERATION); + ss_cap->bFunctionalitySupport = USB_LOW_SPEED_OPERATION; + + /* Get Controller configuration */ + if (cdev->gadget->ops->get_config_params) + cdev->gadget->ops->get_config_params(&dcd_config_params); + else { + dcd_config_params.bU1devExitLat = USB_DEFAULT_U1_DEV_EXIT_LAT; + dcd_config_params.bU2DevExitLat = + cpu_to_le16(USB_DEFAULT_U2_DEV_EXIT_LAT); + } + ss_cap->bU1devExitLat = dcd_config_params.bU1devExitLat; + ss_cap->bU2DevExitLat = dcd_config_params.bU2DevExitLat; + + return le16_to_cpu(bos->wTotalLength); +} + +static void device_qual(struct usb_composite_dev *cdev) +{ + struct usb_qualifier_descriptor *qual = cdev->req->buf; + + qual->bLength = sizeof(*qual); + qual->bDescriptorType = USB_DT_DEVICE_QUALIFIER; + /* POLICY: same bcdUSB and device type info at both speeds */ + qual->bcdUSB = cdev->desc.bcdUSB; + qual->bDeviceClass = cdev->desc.bDeviceClass; + qual->bDeviceSubClass = cdev->desc.bDeviceSubClass; + qual->bDeviceProtocol = cdev->desc.bDeviceProtocol; + /* ASSUME same EP0 fifo size at both speeds */ + qual->bMaxPacketSize0 = cdev->gadget->ep0->maxpacket; + qual->bNumConfigurations = count_configs(cdev, USB_DT_DEVICE_QUALIFIER); + qual->bRESERVED = 0; +} + +/*-------------------------------------------------------------------------*/ + +static void reset_config(struct usb_composite_dev *cdev) +{ + struct usb_function *f; + + DBG(cdev, "reset config\n"); + + list_for_each_entry(f, &cdev->config->functions, list) { + if (f->disable) + f->disable(f); + + bitmap_zero(f->endpoints, 32); + } + cdev->config = NULL; +} + +static int set_config(struct usb_composite_dev *cdev, + const struct usb_ctrlrequest *ctrl, unsigned number) +{ + struct usb_gadget *gadget = cdev->gadget; + struct usb_configuration *c = NULL; + int result = -EINVAL; + unsigned power = gadget_is_otg(gadget) ? 8 : 100; + int tmp; + + if (number) { + list_for_each_entry(c, &cdev->configs, list) { + if (c->bConfigurationValue == number) { + /* + * We disable the FDs of the previous + * configuration only if the new configuration + * is a valid one + */ + if (cdev->config) + reset_config(cdev); + result = 0; + break; + } + } + if (result < 0) + goto done; + } else { /* Zero configuration value - need to reset the config */ + if (cdev->config) + reset_config(cdev); + result = 0; + } + + INFO(cdev, "%s config #%d: %s\n", + usb_speed_string(gadget->speed), + number, c ? c->label : "unconfigured"); + + if (!c) + goto done; + + cdev->config = c; + + /* Initialize all interfaces by setting them to altsetting zero. */ + for (tmp = 0; tmp < MAX_CONFIG_INTERFACES; tmp++) { + struct usb_function *f = c->interface[tmp]; + struct usb_descriptor_header **descriptors; + + if (!f) + break; + + /* + * Record which endpoints are used by the function. This is used + * to dispatch control requests targeted at that endpoint to the + * function's setup callback instead of the current + * configuration's setup callback. + */ + switch (gadget->speed) { + case USB_SPEED_SUPER: + descriptors = f->ss_descriptors; + break; + case USB_SPEED_HIGH: + descriptors = f->hs_descriptors; + break; + default: + descriptors = f->descriptors; + } + + for (; *descriptors; ++descriptors) { + struct usb_endpoint_descriptor *ep; + int addr; + + if ((*descriptors)->bDescriptorType != USB_DT_ENDPOINT) + continue; + + ep = (struct usb_endpoint_descriptor *)*descriptors; + addr = ((ep->bEndpointAddress & 0x80) >> 3) + | (ep->bEndpointAddress & 0x0f); + set_bit(addr, f->endpoints); + } + + result = f->set_alt(f, tmp, 0); + if (result < 0) { + DBG(cdev, "interface %d (%s/%p) alt 0 --> %d\n", + tmp, f->name, f, result); + + reset_config(cdev); + goto done; + } + + if (result == USB_GADGET_DELAYED_STATUS) { + DBG(cdev, + "%s: interface %d (%s) requested delayed status\n", + __func__, tmp, f->name); + cdev->delayed_status++; + DBG(cdev, "delayed_status count %d\n", + cdev->delayed_status); + } + } + + /* when we return, be sure our power usage is valid */ + power = c->bMaxPower ? (2 * c->bMaxPower) : CONFIG_USB_GADGET_VBUS_DRAW; +done: + usb_gadget_vbus_draw(gadget, power); + if (result >= 0 && cdev->delayed_status) + result = USB_GADGET_DELAYED_STATUS; + return result; +} + +/** + * usb_add_config() - add a configuration to a device. + * @cdev: wraps the USB gadget + * @config: the configuration, with bConfigurationValue assigned + * @bind: the configuration's bind function + * Context: single threaded during gadget setup + * + * One of the main tasks of a composite @bind() routine is to + * add each of the configurations it supports, using this routine. + * + * This function returns the value of the configuration's @bind(), which + * is zero for success else a negative errno value. Binding configurations + * assigns global resources including string IDs, and per-configuration + * resources such as interface IDs and endpoints. + */ +int usb_add_config(struct usb_composite_dev *cdev, + struct usb_configuration *config, + int (*bind)(struct usb_configuration *)) +{ + int status = -EINVAL; + struct usb_configuration *c; + + DBG(cdev, "adding config #%u '%s'/%p\n", + config->bConfigurationValue, + config->label, config); + + if (!config->bConfigurationValue || !bind) + goto done; + + /* Prevent duplicate configuration identifiers */ + list_for_each_entry(c, &cdev->configs, list) { + if (c->bConfigurationValue == config->bConfigurationValue) { + status = -EBUSY; + goto done; + } + } + + config->cdev = cdev; + list_add_tail(&config->list, &cdev->configs); + + INIT_LIST_HEAD(&config->functions); + config->next_interface_id = 0; + memset(config->interface, 0, sizeof(config->interface)); + + status = bind(config); + if (status < 0) { + while (!list_empty(&config->functions)) { + struct usb_function *f; + + f = list_first_entry(&config->functions, + struct usb_function, list); + list_del(&f->list); + if (f->unbind) { + DBG(cdev, "unbind function '%s'/%p\n", + f->name, f); + f->unbind(config, f); + /* may free memory for "f" */ + } + } + list_del(&config->list); + config->cdev = NULL; + } else { + unsigned i; + + DBG(cdev, "cfg %d/%p speeds:%s%s%s\n", + config->bConfigurationValue, config, + config->superspeed ? " super" : "", + config->highspeed ? " high" : "", + config->fullspeed + ? (gadget_is_dualspeed(cdev->gadget) + ? " full" + : " full/low") + : ""); + + for (i = 0; i < MAX_CONFIG_INTERFACES; i++) { + struct usb_function *f = config->interface[i]; + + if (!f) + continue; + DBG(cdev, " interface %d = %s/%p\n", + i, f->name, f); + } + } + + /* set_alt(), or next bind(), sets up + * ep->driver_data as needed. + */ + usb_ep_autoconfig_reset(cdev->gadget); + +done: + if (status) + DBG(cdev, "added config '%s'/%u --> %d\n", config->label, + config->bConfigurationValue, status); + return status; +} + +static void remove_config(struct usb_composite_dev *cdev, + struct usb_configuration *config) +{ + while (!list_empty(&config->functions)) { + struct usb_function *f; + + f = list_first_entry(&config->functions, + struct usb_function, list); + list_del(&f->list); + if (f->unbind) { + DBG(cdev, "unbind function '%s'/%p\n", f->name, f); + f->unbind(config, f); + /* may free memory for "f" */ + } + } + list_del(&config->list); + if (config->unbind) { + DBG(cdev, "unbind config '%s'/%p\n", config->label, config); + config->unbind(config); + /* may free memory for "c" */ + } +} + +/** + * usb_remove_config() - remove a configuration from a device. + * @cdev: wraps the USB gadget + * @config: the configuration + * + * Drivers must call usb_gadget_disconnect before calling this function + * to disconnect the device from the host and make sure the host will not + * try to enumerate the device while we are changing the config list. + */ +void usb_remove_config(struct usb_composite_dev *cdev, + struct usb_configuration *config) +{ + unsigned long flags; + + spin_lock_irqsave(&cdev->lock, flags); + + if (cdev->config == config) + reset_config(cdev); + + spin_unlock_irqrestore(&cdev->lock, flags); + + remove_config(cdev, config); +} + +/*-------------------------------------------------------------------------*/ + +/* We support strings in multiple languages ... string descriptor zero + * says which languages are supported. The typical case will be that + * only one language (probably English) is used, with I18N handled on + * the host side. + */ + +static void collect_langs(struct usb_gadget_strings **sp, __le16 *buf) +{ + const struct usb_gadget_strings *s; + __le16 language; + __le16 *tmp; + + while (*sp) { + s = *sp; + language = cpu_to_le16(s->language); + for (tmp = buf; *tmp && tmp < &buf[126]; tmp++) { + if (*tmp == language) + goto repeat; + } + *tmp++ = language; +repeat: + sp++; + } +} + +static int lookup_string( + struct usb_gadget_strings **sp, + void *buf, + u16 language, + int id +) +{ + struct usb_gadget_strings *s; + int value; + + while (*sp) { + s = *sp++; + if (s->language != language) + continue; + value = usb_gadget_get_string(s, id, buf); + if (value > 0) + return value; + } + return -EINVAL; +} + +static int get_string(struct usb_composite_dev *cdev, + void *buf, u16 language, int id) +{ + struct usb_configuration *c; + struct usb_function *f; + int len; + const char *str; + + /* Yes, not only is USB's I18N support probably more than most + * folk will ever care about ... also, it's all supported here. + * (Except for UTF8 support for Unicode's "Astral Planes".) + */ + + /* 0 == report all available language codes */ + if (id == 0) { + struct usb_string_descriptor *s = buf; + struct usb_gadget_strings **sp; + + memset(s, 0, 256); + s->bDescriptorType = USB_DT_STRING; + + sp = composite->strings; + if (sp) + collect_langs(sp, s->wData); + + list_for_each_entry(c, &cdev->configs, list) { + sp = c->strings; + if (sp) + collect_langs(sp, s->wData); + + list_for_each_entry(f, &c->functions, list) { + sp = f->strings; + if (sp) + collect_langs(sp, s->wData); + } + } + + for (len = 0; len <= 126 && s->wData[len]; len++) + continue; + if (!len) + return -EINVAL; + + s->bLength = 2 * (len + 1); + return s->bLength; + } + + /* Otherwise, look up and return a specified string. First + * check if the string has not been overridden. + */ + if (cdev->manufacturer_override == id) + str = iManufacturer ?: composite->iManufacturer ?: + composite_manufacturer; + else if (cdev->product_override == id) + str = iProduct ?: composite->iProduct; + else if (cdev->serial_override == id) + str = iSerialNumber ?: composite->iSerialNumber; + else + str = NULL; + if (str) { + struct usb_gadget_strings strings = { + .language = language, + .strings = &(struct usb_string) { 0xff, str } + }; + return usb_gadget_get_string(&strings, 0xff, buf); + } + + /* String IDs are device-scoped, so we look up each string + * table we're told about. These lookups are infrequent; + * simpler-is-better here. + */ + if (composite->strings) { + len = lookup_string(composite->strings, buf, language, id); + if (len > 0) + return len; + } + list_for_each_entry(c, &cdev->configs, list) { + if (c->strings) { + len = lookup_string(c->strings, buf, language, id); + if (len > 0) + return len; + } + list_for_each_entry(f, &c->functions, list) { + if (!f->strings) + continue; + len = lookup_string(f->strings, buf, language, id); + if (len > 0) + return len; + } + } + return -EINVAL; +} + +/** + * usb_string_id() - allocate an unused string ID + * @cdev: the device whose string descriptor IDs are being allocated + * Context: single threaded during gadget setup + * + * @usb_string_id() is called from bind() callbacks to allocate + * string IDs. Drivers for functions, configurations, or gadgets will + * then store that ID in the appropriate descriptors and string table. + * + * All string identifier should be allocated using this, + * @usb_string_ids_tab() or @usb_string_ids_n() routine, to ensure + * that for example different functions don't wrongly assign different + * meanings to the same identifier. + */ +int usb_string_id(struct usb_composite_dev *cdev) +{ + if (cdev->next_string_id < 254) { + /* string id 0 is reserved by USB spec for list of + * supported languages */ + /* 255 reserved as well? -- mina86 */ + cdev->next_string_id++; + return cdev->next_string_id; + } + return -ENODEV; +} + +/** + * usb_string_ids() - allocate unused string IDs in batch + * @cdev: the device whose string descriptor IDs are being allocated + * @str: an array of usb_string objects to assign numbers to + * Context: single threaded during gadget setup + * + * @usb_string_ids() is called from bind() callbacks to allocate + * string IDs. Drivers for functions, configurations, or gadgets will + * then copy IDs from the string table to the appropriate descriptors + * and string table for other languages. + * + * All string identifier should be allocated using this, + * @usb_string_id() or @usb_string_ids_n() routine, to ensure that for + * example different functions don't wrongly assign different meanings + * to the same identifier. + */ +int usb_string_ids_tab(struct usb_composite_dev *cdev, struct usb_string *str) +{ + int next = cdev->next_string_id; + + for (; str->s; ++str) { + if (unlikely(next >= 254)) + return -ENODEV; + str->id = ++next; + } + + cdev->next_string_id = next; + + return 0; +} + +/** + * usb_string_ids_n() - allocate unused string IDs in batch + * @c: the device whose string descriptor IDs are being allocated + * @n: number of string IDs to allocate + * Context: single threaded during gadget setup + * + * Returns the first requested ID. This ID and next @n-1 IDs are now + * valid IDs. At least provided that @n is non-zero because if it + * is, returns last requested ID which is now very useful information. + * + * @usb_string_ids_n() is called from bind() callbacks to allocate + * string IDs. Drivers for functions, configurations, or gadgets will + * then store that ID in the appropriate descriptors and string table. + * + * All string identifier should be allocated using this, + * @usb_string_id() or @usb_string_ids_n() routine, to ensure that for + * example different functions don't wrongly assign different meanings + * to the same identifier. + */ +int usb_string_ids_n(struct usb_composite_dev *c, unsigned n) +{ + unsigned next = c->next_string_id; + if (unlikely(n > 254 || (unsigned)next + n > 254)) + return -ENODEV; + c->next_string_id += n; + return next + 1; +} + + +/*-------------------------------------------------------------------------*/ + +static void composite_setup_complete(struct usb_ep *ep, struct usb_request *req) +{ + if (req->status || req->actual != req->length) + DBG((struct usb_composite_dev *) ep->driver_data, + "setup complete --> %d, %d/%d\n", + req->status, req->actual, req->length); +} + +/* + * The setup() callback implements all the ep0 functionality that's + * not handled lower down, in hardware or the hardware driver(like + * device and endpoint feature flags, and their status). It's all + * housekeeping for the gadget function we're implementing. Most of + * the work is in config and function specific setup. + */ +static int +composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) +{ + struct usb_composite_dev *cdev = get_gadget_data(gadget); + struct usb_request *req = cdev->req; + int value = -EOPNOTSUPP; + int status = 0; + u16 w_index = le16_to_cpu(ctrl->wIndex); + u8 intf = w_index & 0xFF; + u16 w_value = le16_to_cpu(ctrl->wValue); + u16 w_length = le16_to_cpu(ctrl->wLength); + struct usb_function *f = NULL; + u8 endp; + + /* partial re-init of the response message; the function or the + * gadget might need to intercept e.g. a control-OUT completion + * when we delegate to it. + */ + req->zero = 0; + req->complete = composite_setup_complete; + req->length = 0; + gadget->ep0->driver_data = cdev; + + switch (ctrl->bRequest) { + + /* we handle all standard USB descriptors */ + case USB_REQ_GET_DESCRIPTOR: + if (ctrl->bRequestType != USB_DIR_IN) + goto unknown; + switch (w_value >> 8) { + + case USB_DT_DEVICE: + cdev->desc.bNumConfigurations = + count_configs(cdev, USB_DT_DEVICE); + cdev->desc.bMaxPacketSize0 = + cdev->gadget->ep0->maxpacket; + if (gadget_is_superspeed(gadget)) { + if (gadget->speed >= USB_SPEED_SUPER) { + cdev->desc.bcdUSB = cpu_to_le16(0x0300); + cdev->desc.bMaxPacketSize0 = 9; + } else { + cdev->desc.bcdUSB = cpu_to_le16(0x0210); + } + } + + value = min(w_length, (u16) sizeof cdev->desc); + memcpy(req->buf, &cdev->desc, value); + break; + case USB_DT_DEVICE_QUALIFIER: + if (!gadget_is_dualspeed(gadget) || + gadget->speed >= USB_SPEED_SUPER) + break; + device_qual(cdev); + value = min_t(int, w_length, + sizeof(struct usb_qualifier_descriptor)); + break; + case USB_DT_OTHER_SPEED_CONFIG: + if (!gadget_is_dualspeed(gadget) || + gadget->speed >= USB_SPEED_SUPER) + break; + /* FALLTHROUGH */ + case USB_DT_CONFIG: + value = config_desc(cdev, w_value); + if (value >= 0) + value = min(w_length, (u16) value); + break; + case USB_DT_STRING: + value = get_string(cdev, req->buf, + w_index, w_value & 0xff); + if (value >= 0) + value = min(w_length, (u16) value); + break; + case USB_DT_BOS: + if (gadget_is_superspeed(gadget)) { + value = bos_desc(cdev); + value = min(w_length, (u16) value); + } + break; + } + break; + + /* any number of configs can work */ + case USB_REQ_SET_CONFIGURATION: + if (ctrl->bRequestType != 0) + goto unknown; + if (gadget_is_otg(gadget)) { + if (gadget->a_hnp_support) + DBG(cdev, "HNP available\n"); + else if (gadget->a_alt_hnp_support) + DBG(cdev, "HNP on another port\n"); + else + VDBG(cdev, "HNP inactive\n"); + } + spin_lock(&cdev->lock); + value = set_config(cdev, ctrl, w_value); + spin_unlock(&cdev->lock); + break; + case USB_REQ_GET_CONFIGURATION: + if (ctrl->bRequestType != USB_DIR_IN) + goto unknown; + if (cdev->config) + *(u8 *)req->buf = cdev->config->bConfigurationValue; + else + *(u8 *)req->buf = 0; + value = min(w_length, (u16) 1); + break; + + /* function drivers must handle get/set altsetting; if there's + * no get() method, we know only altsetting zero works. + */ + case USB_REQ_SET_INTERFACE: + if (ctrl->bRequestType != USB_RECIP_INTERFACE) + goto unknown; + if (!cdev->config || intf >= MAX_CONFIG_INTERFACES) + break; + f = cdev->config->interface[intf]; + if (!f) + break; + if (w_value && !f->set_alt) + break; + value = f->set_alt(f, w_index, w_value); + if (value == USB_GADGET_DELAYED_STATUS) { + DBG(cdev, + "%s: interface %d (%s) requested delayed status\n", + __func__, intf, f->name); + cdev->delayed_status++; + DBG(cdev, "delayed_status count %d\n", + cdev->delayed_status); + } + break; + case USB_REQ_GET_INTERFACE: + if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE)) + goto unknown; + if (!cdev->config || intf >= MAX_CONFIG_INTERFACES) + break; + f = cdev->config->interface[intf]; + if (!f) + break; + /* lots of interfaces only need altsetting zero... */ + value = f->get_alt ? f->get_alt(f, w_index) : 0; + if (value < 0) + break; + *((u8 *)req->buf) = value; + value = min(w_length, (u16) 1); + break; + + /* + * USB 3.0 additions: + * Function driver should handle get_status request. If such cb + * wasn't supplied we respond with default value = 0 + * Note: function driver should supply such cb only for the first + * interface of the function + */ + case USB_REQ_GET_STATUS: + if (!gadget_is_superspeed(gadget)) + goto unknown; + if (ctrl->bRequestType != (USB_DIR_IN | USB_RECIP_INTERFACE)) + goto unknown; + value = 2; /* This is the length of the get_status reply */ + put_unaligned_le16(0, req->buf); + if (!cdev->config || intf >= MAX_CONFIG_INTERFACES) + break; + f = cdev->config->interface[intf]; + if (!f) + break; + status = f->get_status ? f->get_status(f) : 0; + if (status < 0) + break; + put_unaligned_le16(status & 0x0000ffff, req->buf); + break; + /* + * Function drivers should handle SetFeature/ClearFeature + * (FUNCTION_SUSPEND) request. function_suspend cb should be supplied + * only for the first interface of the function + */ + case USB_REQ_CLEAR_FEATURE: + case USB_REQ_SET_FEATURE: + if (!gadget_is_superspeed(gadget)) + goto unknown; + if (ctrl->bRequestType != (USB_DIR_OUT | USB_RECIP_INTERFACE)) + goto unknown; + switch (w_value) { + case USB_INTRF_FUNC_SUSPEND: + if (!cdev->config || intf >= MAX_CONFIG_INTERFACES) + break; + f = cdev->config->interface[intf]; + if (!f) + break; + value = 0; + if (f->func_suspend) + value = f->func_suspend(f, w_index >> 8); + if (value < 0) { + ERROR(cdev, + "func_suspend() returned error %d\n", + value); + value = 0; + } + break; + } + break; + default: +unknown: + VDBG(cdev, + "non-core control req%02x.%02x v%04x i%04x l%d\n", + ctrl->bRequestType, ctrl->bRequest, + w_value, w_index, w_length); + + /* functions always handle their interfaces and endpoints... + * punt other recipients (other, WUSB, ...) to the current + * configuration code. + * + * REVISIT it could make sense to let the composite device + * take such requests too, if that's ever needed: to work + * in config 0, etc. + */ + switch (ctrl->bRequestType & USB_RECIP_MASK) { + case USB_RECIP_INTERFACE: + if (!cdev->config || intf >= MAX_CONFIG_INTERFACES) + break; + f = cdev->config->interface[intf]; + break; + + case USB_RECIP_ENDPOINT: + endp = ((w_index & 0x80) >> 3) | (w_index & 0x0f); + list_for_each_entry(f, &cdev->config->functions, list) { + if (test_bit(endp, f->endpoints)) + break; + } + if (&f->list == &cdev->config->functions) + f = NULL; + break; + } + + if (f && f->setup) + value = f->setup(f, ctrl); + else { + struct usb_configuration *c; + + c = cdev->config; + if (c && c->setup) + value = c->setup(c, ctrl); + } + + goto done; + } + + /* respond with data transfer before status phase? */ + if (value >= 0 && value != USB_GADGET_DELAYED_STATUS) { + req->length = value; + req->zero = value < w_length; + value = usb_ep_queue(gadget->ep0, req, GFP_ATOMIC); + if (value < 0) { + DBG(cdev, "ep_queue --> %d\n", value); + req->status = 0; + composite_setup_complete(gadget->ep0, req); + } + } else if (value == USB_GADGET_DELAYED_STATUS && w_length != 0) { + WARN(cdev, + "%s: Delayed status not supported for w_length != 0", + __func__); + } + +done: + /* device either stalls (value < 0) or reports success */ + return value; +} + +static void composite_disconnect(struct usb_gadget *gadget) +{ + struct usb_composite_dev *cdev = get_gadget_data(gadget); + unsigned long flags; + + /* REVISIT: should we have config and device level + * disconnect callbacks? + */ + spin_lock_irqsave(&cdev->lock, flags); + if (cdev->config) + reset_config(cdev); + if (composite->disconnect) + composite->disconnect(cdev); + spin_unlock_irqrestore(&cdev->lock, flags); +} + +/*-------------------------------------------------------------------------*/ + +static ssize_t composite_show_suspended(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct usb_gadget *gadget = dev_to_usb_gadget(dev); + struct usb_composite_dev *cdev = get_gadget_data(gadget); + + return sprintf(buf, "%d\n", cdev->suspended); +} + +static DEVICE_ATTR(suspended, 0444, composite_show_suspended, NULL); + +static void +composite_unbind(struct usb_gadget *gadget) +{ + struct usb_composite_dev *cdev = get_gadget_data(gadget); + + /* composite_disconnect() must already have been called + * by the underlying peripheral controller driver! + * so there's no i/o concurrency that could affect the + * state protected by cdev->lock. + */ + WARN_ON(cdev->config); + + while (!list_empty(&cdev->configs)) { + struct usb_configuration *c; + c = list_first_entry(&cdev->configs, + struct usb_configuration, list); + remove_config(cdev, c); + } + if (composite->unbind) + composite->unbind(cdev); + + if (cdev->req) { + kfree(cdev->req->buf); + usb_ep_free_request(gadget->ep0, cdev->req); + } + device_remove_file(&gadget->dev, &dev_attr_suspended); + kfree(cdev); + set_gadget_data(gadget, NULL); + composite = NULL; +} + +static u8 override_id(struct usb_composite_dev *cdev, u8 *desc) +{ + if (!*desc) { + int ret = usb_string_id(cdev); + if (unlikely(ret < 0)) + WARNING(cdev, "failed to override string ID\n"); + else + *desc = ret; + } + + return *desc; +} + +static int composite_bind(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) +{ + struct usb_composite_dev *cdev; + int status = -ENOMEM; + + cdev = kzalloc(sizeof *cdev, GFP_KERNEL); + if (!cdev) + return status; + + spin_lock_init(&cdev->lock); + cdev->gadget = gadget; + set_gadget_data(gadget, cdev); + INIT_LIST_HEAD(&cdev->configs); + + /* preallocate control response and buffer */ + cdev->req = usb_ep_alloc_request(gadget->ep0, GFP_KERNEL); + if (!cdev->req) + goto fail; + cdev->req->buf = kmalloc(USB_BUFSIZ, GFP_KERNEL); + if (!cdev->req->buf) + goto fail; + cdev->req->complete = composite_setup_complete; + gadget->ep0->driver_data = cdev; + + cdev->bufsiz = USB_BUFSIZ; + cdev->driver = composite; + + /* + * As per USB compliance update, a device that is actively drawing + * more than 100mA from USB must report itself as bus-powered in + * the GetStatus(DEVICE) call. + */ + if (CONFIG_USB_GADGET_VBUS_DRAW <= USB_SELF_POWER_VBUS_MAX_DRAW) + usb_gadget_set_selfpowered(gadget); + + /* interface and string IDs start at zero via kzalloc. + * we force endpoints to start unassigned; few controller + * drivers will zero ep->driver_data. + */ + usb_ep_autoconfig_reset(cdev->gadget); + + /* composite gadget needs to assign strings for whole device (like + * serial number), register function drivers, potentially update + * power state and consumption, etc + */ + status = composite->bind(cdev); + if (status < 0) + goto fail; + + cdev->desc = *composite->dev; + + /* standardized runtime overrides for device ID data */ + if (idVendor) + cdev->desc.idVendor = cpu_to_le16(idVendor); + else + idVendor = le16_to_cpu(cdev->desc.idVendor); + if (idProduct) + cdev->desc.idProduct = cpu_to_le16(idProduct); + else + idProduct = le16_to_cpu(cdev->desc.idProduct); + if (bcdDevice) + cdev->desc.bcdDevice = cpu_to_le16(bcdDevice); + else + bcdDevice = le16_to_cpu(cdev->desc.bcdDevice); + + /* string overrides */ + if (iManufacturer || !cdev->desc.iManufacturer) { + if (!iManufacturer && !composite->iManufacturer && + !*composite_manufacturer) + snprintf(composite_manufacturer, + sizeof composite_manufacturer, + "%s %s with %s", + init_utsname()->sysname, + init_utsname()->release, + gadget->name); + + cdev->manufacturer_override = + override_id(cdev, &cdev->desc.iManufacturer); + } + + if (iProduct || (!cdev->desc.iProduct && composite->iProduct)) + cdev->product_override = + override_id(cdev, &cdev->desc.iProduct); + + if (iSerialNumber || + (!cdev->desc.iSerialNumber && composite->iSerialNumber)) + cdev->serial_override = + override_id(cdev, &cdev->desc.iSerialNumber); + + /* has userspace failed to provide a serial number? */ + if (composite->needs_serial && !cdev->desc.iSerialNumber) + WARNING(cdev, "userspace failed to provide iSerialNumber\n"); + + /* finish up */ + status = device_create_file(&gadget->dev, &dev_attr_suspended); + if (status) + goto fail; + + INFO(cdev, "%s ready\n", composite->name); + return 0; + +fail: + composite_unbind(gadget); + return status; +} + +/*-------------------------------------------------------------------------*/ + +static void +composite_suspend(struct usb_gadget *gadget) +{ + struct usb_composite_dev *cdev = get_gadget_data(gadget); + struct usb_function *f; + + /* REVISIT: should we have config level + * suspend/resume callbacks? + */ + DBG(cdev, "suspend\n"); + if (cdev->config) { + list_for_each_entry(f, &cdev->config->functions, list) { + if (f->suspend) + f->suspend(f); + } + } + if (composite->suspend) + composite->suspend(cdev); + + cdev->suspended = 1; + + usb_gadget_vbus_draw(gadget, 2); +} + +static void +composite_resume(struct usb_gadget *gadget) +{ + struct usb_composite_dev *cdev = get_gadget_data(gadget); + struct usb_function *f; + u8 maxpower; + + /* REVISIT: should we have config level + * suspend/resume callbacks? + */ + DBG(cdev, "resume\n"); + if (composite->resume) + composite->resume(cdev); + if (cdev->config) { + list_for_each_entry(f, &cdev->config->functions, list) { + if (f->resume) + f->resume(f); + } + + maxpower = cdev->config->bMaxPower; + + usb_gadget_vbus_draw(gadget, maxpower ? + (2 * maxpower) : CONFIG_USB_GADGET_VBUS_DRAW); + } + + cdev->suspended = 0; +} + +/*-------------------------------------------------------------------------*/ + +static struct usb_gadget_driver composite_driver = { + .bind = composite_bind, + .unbind = composite_unbind, + + .setup = composite_setup, + .disconnect = composite_disconnect, + + .suspend = composite_suspend, + .resume = composite_resume, + + .driver = { + .owner = THIS_MODULE, + }, +}; + +/** + * usb_composite_probe() - register a composite driver + * @driver: the driver to register + * @bind: the callback used to allocate resources that are shared across the + * whole device, such as string IDs, and add its configurations using + * @usb_add_config(). This may fail by returning a negative errno + * value; it should return zero on successful initialization. + * Context: single threaded during gadget setup + * + * This function is used to register drivers using the composite driver + * framework. The return value is zero, or a negative errno value. + * Those values normally come from the driver's @bind method, which does + * all the work of setting up the driver to match the hardware. + * + * On successful return, the gadget is ready to respond to requests from + * the host, unless one of its components invokes usb_gadget_disconnect() + * while it was binding. That would usually be done in order to wait for + * some userspace participation. + */ +int usb_composite_probe(struct usb_composite_driver *driver) +{ + if (!driver || !driver->dev || composite || !driver->bind) + return -EINVAL; + + if (!driver->name) + driver->name = "composite"; + if (!driver->iProduct) + driver->iProduct = driver->name; + composite_driver.function = (char *) driver->name; + composite_driver.driver.name = driver->name; + composite_driver.max_speed = driver->max_speed; + composite = driver; + + return usb_gadget_probe_driver(&composite_driver); +} + +/** + * usb_composite_unregister() - unregister a composite driver + * @driver: the driver to unregister + * + * This function is used to unregister drivers using the composite + * driver framework. + */ +void usb_composite_unregister(struct usb_composite_driver *driver) +{ + if (composite != driver) + return; + usb_gadget_unregister_driver(&composite_driver); +} + +/** + * usb_composite_setup_continue() - Continue with the control transfer + * @cdev: the composite device who's control transfer was kept waiting + * + * This function must be called by the USB function driver to continue + * with the control transfer's data/status stage in case it had requested to + * delay the data/status stages. A USB function's setup handler (e.g. set_alt()) + * can request the composite framework to delay the setup request's data/status + * stages by returning USB_GADGET_DELAYED_STATUS. + */ +void usb_composite_setup_continue(struct usb_composite_dev *cdev) +{ + int value; + struct usb_request *req = cdev->req; + unsigned long flags; + + DBG(cdev, "%s\n", __func__); + spin_lock_irqsave(&cdev->lock, flags); + + if (cdev->delayed_status == 0) { + WARN(cdev, "%s: Unexpected call\n", __func__); + + } else if (--cdev->delayed_status == 0) { + DBG(cdev, "%s: Completing delayed status\n", __func__); + req->length = 0; + value = usb_ep_queue(cdev->gadget->ep0, req, GFP_ATOMIC); + if (value < 0) { + DBG(cdev, "ep_queue --> %d\n", value); + req->status = 0; + composite_setup_complete(cdev->gadget->ep0, req); + } + } + + spin_unlock_irqrestore(&cdev->lock, flags); +} + diff --git a/drivers/staging/ccg/composite.h b/drivers/staging/ccg/composite.h new file mode 100644 index 000000000000..19a5adf18bf4 --- /dev/null +++ b/drivers/staging/ccg/composite.h @@ -0,0 +1,395 @@ +/* + * composite.h -- framework for usb gadgets which are composite devices + * + * Copyright (C) 2006-2008 David Brownell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef __LINUX_USB_COMPOSITE_H +#define __LINUX_USB_COMPOSITE_H + +/* + * This framework is an optional layer on top of the USB Gadget interface, + * making it easier to build (a) Composite devices, supporting multiple + * functions within any single configuration, and (b) Multi-configuration + * devices, also supporting multiple functions but without necessarily + * having more than one function per configuration. + * + * Example: a device with a single configuration supporting both network + * link and mass storage functions is a composite device. Those functions + * might alternatively be packaged in individual configurations, but in + * the composite model the host can use both functions at the same time. + */ + +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> + +/* + * USB function drivers should return USB_GADGET_DELAYED_STATUS if they + * wish to delay the data/status stages of the control transfer till they + * are ready. The control transfer will then be kept from completing till + * all the function drivers that requested for USB_GADGET_DELAYED_STAUS + * invoke usb_composite_setup_continue(). + */ +#define USB_GADGET_DELAYED_STATUS 0x7fff /* Impossibly large value */ + +struct usb_configuration; + +/** + * struct usb_function - describes one function of a configuration + * @name: For diagnostics, identifies the function. + * @strings: tables of strings, keyed by identifiers assigned during bind() + * and by language IDs provided in control requests + * @descriptors: Table of full (or low) speed descriptors, using interface and + * string identifiers assigned during @bind(). If this pointer is null, + * the function will not be available at full speed (or at low speed). + * @hs_descriptors: Table of high speed descriptors, using interface and + * string identifiers assigned during @bind(). If this pointer is null, + * the function will not be available at high speed. + * @ss_descriptors: Table of super speed descriptors, using interface and + * string identifiers assigned during @bind(). If this + * pointer is null after initiation, the function will not + * be available at super speed. + * @config: assigned when @usb_add_function() is called; this is the + * configuration with which this function is associated. + * @bind: Before the gadget can register, all of its functions bind() to the + * available resources including string and interface identifiers used + * in interface or class descriptors; endpoints; I/O buffers; and so on. + * @unbind: Reverses @bind; called as a side effect of unregistering the + * driver which added this function. + * @set_alt: (REQUIRED) Reconfigures altsettings; function drivers may + * initialize usb_ep.driver data at this time (when it is used). + * Note that setting an interface to its current altsetting resets + * interface state, and that all interfaces have a disabled state. + * @get_alt: Returns the active altsetting. If this is not provided, + * then only altsetting zero is supported. + * @disable: (REQUIRED) Indicates the function should be disabled. Reasons + * include host resetting or reconfiguring the gadget, and disconnection. + * @setup: Used for interface-specific control requests. + * @suspend: Notifies functions when the host stops sending USB traffic. + * @resume: Notifies functions when the host restarts USB traffic. + * @get_status: Returns function status as a reply to + * GetStatus() request when the recepient is Interface. + * @func_suspend: callback to be called when + * SetFeature(FUNCTION_SUSPEND) is reseived + * + * A single USB function uses one or more interfaces, and should in most + * cases support operation at both full and high speeds. Each function is + * associated by @usb_add_function() with a one configuration; that function + * causes @bind() to be called so resources can be allocated as part of + * setting up a gadget driver. Those resources include endpoints, which + * should be allocated using @usb_ep_autoconfig(). + * + * To support dual speed operation, a function driver provides descriptors + * for both high and full speed operation. Except in rare cases that don't + * involve bulk endpoints, each speed needs different endpoint descriptors. + * + * Function drivers choose their own strategies for managing instance data. + * The simplest strategy just declares it "static', which means the function + * can only be activated once. If the function needs to be exposed in more + * than one configuration at a given speed, it needs to support multiple + * usb_function structures (one for each configuration). + * + * A more complex strategy might encapsulate a @usb_function structure inside + * a driver-specific instance structure to allows multiple activations. An + * example of multiple activations might be a CDC ACM function that supports + * two or more distinct instances within the same configuration, providing + * several independent logical data links to a USB host. + */ +struct usb_function { + const char *name; + struct usb_gadget_strings **strings; + struct usb_descriptor_header **descriptors; + struct usb_descriptor_header **hs_descriptors; + struct usb_descriptor_header **ss_descriptors; + + struct usb_configuration *config; + + /* REVISIT: bind() functions can be marked __init, which + * makes trouble for section mismatch analysis. See if + * we can't restructure things to avoid mismatching. + * Related: unbind() may kfree() but bind() won't... + */ + + /* configuration management: bind/unbind */ + int (*bind)(struct usb_configuration *, + struct usb_function *); + void (*unbind)(struct usb_configuration *, + struct usb_function *); + + /* runtime state management */ + int (*set_alt)(struct usb_function *, + unsigned interface, unsigned alt); + int (*get_alt)(struct usb_function *, + unsigned interface); + void (*disable)(struct usb_function *); + int (*setup)(struct usb_function *, + const struct usb_ctrlrequest *); + void (*suspend)(struct usb_function *); + void (*resume)(struct usb_function *); + + /* USB 3.0 additions */ + int (*get_status)(struct usb_function *); + int (*func_suspend)(struct usb_function *, + u8 suspend_opt); + /* private: */ + /* internals */ + struct list_head list; + DECLARE_BITMAP(endpoints, 32); +}; + +int usb_add_function(struct usb_configuration *, struct usb_function *); + +int usb_function_deactivate(struct usb_function *); +int usb_function_activate(struct usb_function *); + +int usb_interface_id(struct usb_configuration *, struct usb_function *); + +int config_ep_by_speed(struct usb_gadget *g, struct usb_function *f, + struct usb_ep *_ep); + +#define MAX_CONFIG_INTERFACES 16 /* arbitrary; max 255 */ + +/** + * struct usb_configuration - represents one gadget configuration + * @label: For diagnostics, describes the configuration. + * @strings: Tables of strings, keyed by identifiers assigned during @bind() + * and by language IDs provided in control requests. + * @descriptors: Table of descriptors preceding all function descriptors. + * Examples include OTG and vendor-specific descriptors. + * @unbind: Reverses @bind; called as a side effect of unregistering the + * driver which added this configuration. + * @setup: Used to delegate control requests that aren't handled by standard + * device infrastructure or directed at a specific interface. + * @bConfigurationValue: Copied into configuration descriptor. + * @iConfiguration: Copied into configuration descriptor. + * @bmAttributes: Copied into configuration descriptor. + * @bMaxPower: Copied into configuration descriptor. + * @cdev: assigned by @usb_add_config() before calling @bind(); this is + * the device associated with this configuration. + * + * Configurations are building blocks for gadget drivers structured around + * function drivers. Simple USB gadgets require only one function and one + * configuration, and handle dual-speed hardware by always providing the same + * functionality. Slightly more complex gadgets may have more than one + * single-function configuration at a given speed; or have configurations + * that only work at one speed. + * + * Composite devices are, by definition, ones with configurations which + * include more than one function. + * + * The lifecycle of a usb_configuration includes allocation, initialization + * of the fields described above, and calling @usb_add_config() to set up + * internal data and bind it to a specific device. The configuration's + * @bind() method is then used to initialize all the functions and then + * call @usb_add_function() for them. + * + * Those functions would normally be independent of each other, but that's + * not mandatory. CDC WMC devices are an example where functions often + * depend on other functions, with some functions subsidiary to others. + * Such interdependency may be managed in any way, so long as all of the + * descriptors complete by the time the composite driver returns from + * its bind() routine. + */ +struct usb_configuration { + const char *label; + struct usb_gadget_strings **strings; + const struct usb_descriptor_header **descriptors; + + /* REVISIT: bind() functions can be marked __init, which + * makes trouble for section mismatch analysis. See if + * we can't restructure things to avoid mismatching... + */ + + /* configuration management: unbind/setup */ + void (*unbind)(struct usb_configuration *); + int (*setup)(struct usb_configuration *, + const struct usb_ctrlrequest *); + + /* fields in the config descriptor */ + u8 bConfigurationValue; + u8 iConfiguration; + u8 bmAttributes; + u8 bMaxPower; + + struct usb_composite_dev *cdev; + + /* private: */ + /* internals */ + struct list_head list; + struct list_head functions; + u8 next_interface_id; + unsigned superspeed:1; + unsigned highspeed:1; + unsigned fullspeed:1; + struct usb_function *interface[MAX_CONFIG_INTERFACES]; +}; + +int usb_add_config(struct usb_composite_dev *, + struct usb_configuration *, + int (*)(struct usb_configuration *)); + +void usb_remove_config(struct usb_composite_dev *, + struct usb_configuration *); + +/** + * struct usb_composite_driver - groups configurations into a gadget + * @name: For diagnostics, identifies the driver. + * @iProduct: Used as iProduct override if @dev->iProduct is not set. + * If NULL value of @name is taken. + * @iManufacturer: Used as iManufacturer override if @dev->iManufacturer is + * not set. If NULL a default "<system> <release> with <udc>" value + * will be used. + * @iSerialNumber: Used as iSerialNumber override if @dev->iSerialNumber is + * not set. + * @dev: Template descriptor for the device, including default device + * identifiers. + * @strings: tables of strings, keyed by identifiers assigned during @bind + * and language IDs provided in control requests + * @max_speed: Highest speed the driver supports. + * @needs_serial: set to 1 if the gadget needs userspace to provide + * a serial number. If one is not provided, warning will be printed. + * @bind: (REQUIRED) Used to allocate resources that are shared across the + * whole device, such as string IDs, and add its configurations using + * @usb_add_config(). This may fail by returning a negative errno + * value; it should return zero on successful initialization. + * @unbind: Reverses @bind; called as a side effect of unregistering + * this driver. + * @disconnect: optional driver disconnect method + * @suspend: Notifies when the host stops sending USB traffic, + * after function notifications + * @resume: Notifies configuration when the host restarts USB traffic, + * before function notifications + * + * Devices default to reporting self powered operation. Devices which rely + * on bus powered operation should report this in their @bind method. + * + * Before returning from @bind, various fields in the template descriptor + * may be overridden. These include the idVendor/idProduct/bcdDevice values + * normally to bind the appropriate host side driver, and the three strings + * (iManufacturer, iProduct, iSerialNumber) normally used to provide user + * meaningful device identifiers. (The strings will not be defined unless + * they are defined in @dev and @strings.) The correct ep0 maxpacket size + * is also reported, as defined by the underlying controller driver. + */ +struct usb_composite_driver { + const char *name; + const char *iProduct; + const char *iManufacturer; + const char *iSerialNumber; + const struct usb_device_descriptor *dev; + struct usb_gadget_strings **strings; + enum usb_device_speed max_speed; + unsigned needs_serial:1; + + int (*bind)(struct usb_composite_dev *cdev); + int (*unbind)(struct usb_composite_dev *); + + void (*disconnect)(struct usb_composite_dev *); + + /* global suspend hooks */ + void (*suspend)(struct usb_composite_dev *); + void (*resume)(struct usb_composite_dev *); +}; + +extern int usb_composite_probe(struct usb_composite_driver *driver); +extern void usb_composite_unregister(struct usb_composite_driver *driver); +extern void usb_composite_setup_continue(struct usb_composite_dev *cdev); + + +/** + * struct usb_composite_device - represents one composite usb gadget + * @gadget: read-only, abstracts the gadget's usb peripheral controller + * @req: used for control responses; buffer is pre-allocated + * @bufsiz: size of buffer pre-allocated in @req + * @config: the currently active configuration + * + * One of these devices is allocated and initialized before the + * associated device driver's bind() is called. + * + * OPEN ISSUE: it appears that some WUSB devices will need to be + * built by combining a normal (wired) gadget with a wireless one. + * This revision of the gadget framework should probably try to make + * sure doing that won't hurt too much. + * + * One notion for how to handle Wireless USB devices involves: + * (a) a second gadget here, discovery mechanism TBD, but likely + * needing separate "register/unregister WUSB gadget" calls; + * (b) updates to usb_gadget to include flags "is it wireless", + * "is it wired", plus (presumably in a wrapper structure) + * bandgroup and PHY info; + * (c) presumably a wireless_ep wrapping a usb_ep, and reporting + * wireless-specific parameters like maxburst and maxsequence; + * (d) configurations that are specific to wireless links; + * (e) function drivers that understand wireless configs and will + * support wireless for (additional) function instances; + * (f) a function to support association setup (like CBAF), not + * necessarily requiring a wireless adapter; + * (g) composite device setup that can create one or more wireless + * configs, including appropriate association setup support; + * (h) more, TBD. + */ +struct usb_composite_dev { + struct usb_gadget *gadget; + struct usb_request *req; + unsigned bufsiz; + + struct usb_configuration *config; + + /* private: */ + /* internals */ + unsigned int suspended:1; + struct usb_device_descriptor desc; + struct list_head configs; + struct usb_composite_driver *driver; + u8 next_string_id; + u8 manufacturer_override; + u8 product_override; + u8 serial_override; + + /* the gadget driver won't enable the data pullup + * while the deactivation count is nonzero. + */ + unsigned deactivations; + + /* the composite driver won't complete the control transfer's + * data/status stages till delayed_status is zero. + */ + int delayed_status; + + /* protects deactivations and delayed_status counts*/ + spinlock_t lock; +}; + +extern int usb_string_id(struct usb_composite_dev *c); +extern int usb_string_ids_tab(struct usb_composite_dev *c, + struct usb_string *str); +extern int usb_string_ids_n(struct usb_composite_dev *c, unsigned n); + + +/* messaging utils */ +#define DBG(d, fmt, args...) \ + dev_dbg(&(d)->gadget->dev , fmt , ## args) +#define VDBG(d, fmt, args...) \ + dev_vdbg(&(d)->gadget->dev , fmt , ## args) +#define ERROR(d, fmt, args...) \ + dev_err(&(d)->gadget->dev , fmt , ## args) +#define WARNING(d, fmt, args...) \ + dev_warn(&(d)->gadget->dev , fmt , ## args) +#define INFO(d, fmt, args...) \ + dev_info(&(d)->gadget->dev , fmt , ## args) + +#endif /* __LINUX_USB_COMPOSITE_H */ diff --git a/drivers/staging/ccg/config.c b/drivers/staging/ccg/config.c new file mode 100644 index 000000000000..7542a72ce51a --- /dev/null +++ b/drivers/staging/ccg/config.c @@ -0,0 +1,158 @@ +/* + * usb/gadget/config.c -- simplify building config descriptors + * + * Copyright (C) 2003 David Brownell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/string.h> +#include <linux/device.h> + +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> + + +/** + * usb_descriptor_fillbuf - fill buffer with descriptors + * @buf: Buffer to be filled + * @buflen: Size of buf + * @src: Array of descriptor pointers, terminated by null pointer. + * + * Copies descriptors into the buffer, returning the length or a + * negative error code if they can't all be copied. Useful when + * assembling descriptors for an associated set of interfaces used + * as part of configuring a composite device; or in other cases where + * sets of descriptors need to be marshaled. + */ +int +usb_descriptor_fillbuf(void *buf, unsigned buflen, + const struct usb_descriptor_header **src) +{ + u8 *dest = buf; + + if (!src) + return -EINVAL; + + /* fill buffer from src[] until null descriptor ptr */ + for (; NULL != *src; src++) { + unsigned len = (*src)->bLength; + + if (len > buflen) + return -EINVAL; + memcpy(dest, *src, len); + buflen -= len; + dest += len; + } + return dest - (u8 *)buf; +} + + +/** + * usb_gadget_config_buf - builts a complete configuration descriptor + * @config: Header for the descriptor, including characteristics such + * as power requirements and number of interfaces. + * @desc: Null-terminated vector of pointers to the descriptors (interface, + * endpoint, etc) defining all functions in this device configuration. + * @buf: Buffer for the resulting configuration descriptor. + * @length: Length of buffer. If this is not big enough to hold the + * entire configuration descriptor, an error code will be returned. + * + * This copies descriptors into the response buffer, building a descriptor + * for that configuration. It returns the buffer length or a negative + * status code. The config.wTotalLength field is set to match the length + * of the result, but other descriptor fields (including power usage and + * interface count) must be set by the caller. + * + * Gadget drivers could use this when constructing a config descriptor + * in response to USB_REQ_GET_DESCRIPTOR. They will need to patch the + * resulting bDescriptorType value if USB_DT_OTHER_SPEED_CONFIG is needed. + */ +int usb_gadget_config_buf( + const struct usb_config_descriptor *config, + void *buf, + unsigned length, + const struct usb_descriptor_header **desc +) +{ + struct usb_config_descriptor *cp = buf; + int len; + + /* config descriptor first */ + if (length < USB_DT_CONFIG_SIZE || !desc) + return -EINVAL; + *cp = *config; + + /* then interface/endpoint/class/vendor/... */ + len = usb_descriptor_fillbuf(USB_DT_CONFIG_SIZE + (u8*)buf, + length - USB_DT_CONFIG_SIZE, desc); + if (len < 0) + return len; + len += USB_DT_CONFIG_SIZE; + if (len > 0xffff) + return -EINVAL; + + /* patch up the config descriptor */ + cp->bLength = USB_DT_CONFIG_SIZE; + cp->bDescriptorType = USB_DT_CONFIG; + cp->wTotalLength = cpu_to_le16(len); + cp->bmAttributes |= USB_CONFIG_ATT_ONE; + return len; +} + +/** + * usb_copy_descriptors - copy a vector of USB descriptors + * @src: null-terminated vector to copy + * Context: initialization code, which may sleep + * + * This makes a copy of a vector of USB descriptors. Its primary use + * is to support usb_function objects which can have multiple copies, + * each needing different descriptors. Functions may have static + * tables of descriptors, which are used as templates and customized + * with identifiers (for interfaces, strings, endpoints, and more) + * as needed by a given function instance. + */ +struct usb_descriptor_header ** +usb_copy_descriptors(struct usb_descriptor_header **src) +{ + struct usb_descriptor_header **tmp; + unsigned bytes; + unsigned n_desc; + void *mem; + struct usb_descriptor_header **ret; + + /* count descriptors and their sizes; then add vector size */ + for (bytes = 0, n_desc = 0, tmp = src; *tmp; tmp++, n_desc++) + bytes += (*tmp)->bLength; + bytes += (n_desc + 1) * sizeof(*tmp); + + mem = kmalloc(bytes, GFP_KERNEL); + if (!mem) + return NULL; + + /* fill in pointers starting at "tmp", + * to descriptors copied starting at "mem"; + * and return "ret" + */ + tmp = mem; + ret = mem; + mem += (n_desc + 1) * sizeof(*tmp); + while (*src) { + memcpy(mem, *src, (*src)->bLength); + *tmp = mem; + tmp++; + mem += (*src)->bLength; + src++; + } + *tmp = NULL; + + return ret; +} + diff --git a/drivers/staging/ccg/epautoconf.c b/drivers/staging/ccg/epautoconf.c new file mode 100644 index 000000000000..51f3d42f5a64 --- /dev/null +++ b/drivers/staging/ccg/epautoconf.c @@ -0,0 +1,393 @@ +/* + * epautoconf.c -- endpoint autoconfiguration for usb gadget drivers + * + * Copyright (C) 2004 David Brownell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/types.h> +#include <linux/device.h> + +#include <linux/ctype.h> +#include <linux/string.h> + +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> + +#include "gadget_chips.h" + + +/* we must assign addresses for configurable endpoints (like net2280) */ +static unsigned epnum; + +// #define MANY_ENDPOINTS +#ifdef MANY_ENDPOINTS +/* more than 15 configurable endpoints */ +static unsigned in_epnum; +#endif + + +/* + * This should work with endpoints from controller drivers sharing the + * same endpoint naming convention. By example: + * + * - ep1, ep2, ... address is fixed, not direction or type + * - ep1in, ep2out, ... address and direction are fixed, not type + * - ep1-bulk, ep2-bulk, ... address and type are fixed, not direction + * - ep1in-bulk, ep2out-iso, ... all three are fixed + * - ep-* ... no functionality restrictions + * + * Type suffixes are "-bulk", "-iso", or "-int". Numbers are decimal. + * Less common restrictions are implied by gadget_is_*(). + * + * NOTE: each endpoint is unidirectional, as specified by its USB + * descriptor; and isn't specific to a configuration or altsetting. + */ +static int +ep_matches ( + struct usb_gadget *gadget, + struct usb_ep *ep, + struct usb_endpoint_descriptor *desc, + struct usb_ss_ep_comp_descriptor *ep_comp +) +{ + u8 type; + const char *tmp; + u16 max; + + int num_req_streams = 0; + + /* endpoint already claimed? */ + if (NULL != ep->driver_data) + return 0; + + /* only support ep0 for portable CONTROL traffic */ + type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; + if (USB_ENDPOINT_XFER_CONTROL == type) + return 0; + + /* some other naming convention */ + if ('e' != ep->name[0]) + return 0; + + /* type-restriction: "-iso", "-bulk", or "-int". + * direction-restriction: "in", "out". + */ + if ('-' != ep->name[2]) { + tmp = strrchr (ep->name, '-'); + if (tmp) { + switch (type) { + case USB_ENDPOINT_XFER_INT: + /* bulk endpoints handle interrupt transfers, + * except the toggle-quirky iso-synch kind + */ + if ('s' == tmp[2]) // == "-iso" + return 0; + /* for now, avoid PXA "interrupt-in"; + * it's documented as never using DATA1. + */ + if (gadget_is_pxa (gadget) + && 'i' == tmp [1]) + return 0; + break; + case USB_ENDPOINT_XFER_BULK: + if ('b' != tmp[1]) // != "-bulk" + return 0; + break; + case USB_ENDPOINT_XFER_ISOC: + if ('s' != tmp[2]) // != "-iso" + return 0; + } + } else { + tmp = ep->name + strlen (ep->name); + } + + /* direction-restriction: "..in-..", "out-.." */ + tmp--; + if (!isdigit (*tmp)) { + if (desc->bEndpointAddress & USB_DIR_IN) { + if ('n' != *tmp) + return 0; + } else { + if ('t' != *tmp) + return 0; + } + } + } + + /* + * Get the number of required streams from the EP companion + * descriptor and see if the EP matches it + */ + if (usb_endpoint_xfer_bulk(desc)) { + if (ep_comp && gadget->max_speed >= USB_SPEED_SUPER) { + num_req_streams = ep_comp->bmAttributes & 0x1f; + if (num_req_streams > ep->max_streams) + return 0; + } + + } + + /* + * If the protocol driver hasn't yet decided on wMaxPacketSize + * and wants to know the maximum possible, provide the info. + */ + if (desc->wMaxPacketSize == 0) + desc->wMaxPacketSize = cpu_to_le16(ep->maxpacket); + + /* endpoint maxpacket size is an input parameter, except for bulk + * where it's an output parameter representing the full speed limit. + * the usb spec fixes high speed bulk maxpacket at 512 bytes. + */ + max = 0x7ff & usb_endpoint_maxp(desc); + switch (type) { + case USB_ENDPOINT_XFER_INT: + /* INT: limit 64 bytes full speed, 1024 high/super speed */ + if (!gadget_is_dualspeed(gadget) && max > 64) + return 0; + /* FALLTHROUGH */ + + case USB_ENDPOINT_XFER_ISOC: + /* ISO: limit 1023 bytes full speed, 1024 high/super speed */ + if (ep->maxpacket < max) + return 0; + if (!gadget_is_dualspeed(gadget) && max > 1023) + return 0; + + /* BOTH: "high bandwidth" works only at high speed */ + if ((desc->wMaxPacketSize & cpu_to_le16(3<<11))) { + if (!gadget_is_dualspeed(gadget)) + return 0; + /* configure your hardware with enough buffering!! */ + } + break; + } + + /* MATCH!! */ + + /* report address */ + desc->bEndpointAddress &= USB_DIR_IN; + if (isdigit (ep->name [2])) { + u8 num = simple_strtoul (&ep->name [2], NULL, 10); + desc->bEndpointAddress |= num; +#ifdef MANY_ENDPOINTS + } else if (desc->bEndpointAddress & USB_DIR_IN) { + if (++in_epnum > 15) + return 0; + desc->bEndpointAddress = USB_DIR_IN | in_epnum; +#endif + } else { + if (++epnum > 15) + return 0; + desc->bEndpointAddress |= epnum; + } + + /* report (variable) full speed bulk maxpacket */ + if ((USB_ENDPOINT_XFER_BULK == type) && !ep_comp) { + int size = ep->maxpacket; + + /* min() doesn't work on bitfields with gcc-3.5 */ + if (size > 64) + size = 64; + desc->wMaxPacketSize = cpu_to_le16(size); + } + ep->address = desc->bEndpointAddress; + return 1; +} + +static struct usb_ep * +find_ep (struct usb_gadget *gadget, const char *name) +{ + struct usb_ep *ep; + + list_for_each_entry (ep, &gadget->ep_list, ep_list) { + if (0 == strcmp (ep->name, name)) + return ep; + } + return NULL; +} + +/** + * usb_ep_autoconfig_ss() - choose an endpoint matching the ep + * descriptor and ep companion descriptor + * @gadget: The device to which the endpoint must belong. + * @desc: Endpoint descriptor, with endpoint direction and transfer mode + * initialized. For periodic transfers, the maximum packet + * size must also be initialized. This is modified on + * success. + * @ep_comp: Endpoint companion descriptor, with the required + * number of streams. Will be modified when the chosen EP + * supports a different number of streams. + * + * This routine replaces the usb_ep_autoconfig when needed + * superspeed enhancments. If such enhancemnets are required, + * the FD should call usb_ep_autoconfig_ss directly and provide + * the additional ep_comp parameter. + * + * By choosing an endpoint to use with the specified descriptor, + * this routine simplifies writing gadget drivers that work with + * multiple USB device controllers. The endpoint would be + * passed later to usb_ep_enable(), along with some descriptor. + * + * That second descriptor won't always be the same as the first one. + * For example, isochronous endpoints can be autoconfigured for high + * bandwidth, and then used in several lower bandwidth altsettings. + * Also, high and full speed descriptors will be different. + * + * Be sure to examine and test the results of autoconfiguration + * on your hardware. This code may not make the best choices + * about how to use the USB controller, and it can't know all + * the restrictions that may apply. Some combinations of driver + * and hardware won't be able to autoconfigure. + * + * On success, this returns an un-claimed usb_ep, and modifies the endpoint + * descriptor bEndpointAddress. For bulk endpoints, the wMaxPacket value + * is initialized as if the endpoint were used at full speed and + * the bmAttribute field in the ep companion descriptor is + * updated with the assigned number of streams if it is + * different from the original value. To prevent the endpoint + * from being returned by a later autoconfig call, claim it by + * assigning ep->driver_data to some non-null value. + * + * On failure, this returns a null endpoint descriptor. + */ +struct usb_ep *usb_ep_autoconfig_ss( + struct usb_gadget *gadget, + struct usb_endpoint_descriptor *desc, + struct usb_ss_ep_comp_descriptor *ep_comp +) +{ + struct usb_ep *ep; + u8 type; + + type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; + + /* First, apply chip-specific "best usage" knowledge. + * This might make a good usb_gadget_ops hook ... + */ + if (gadget_is_net2280 (gadget) && type == USB_ENDPOINT_XFER_INT) { + /* ep-e, ep-f are PIO with only 64 byte fifos */ + ep = find_ep (gadget, "ep-e"); + if (ep && ep_matches(gadget, ep, desc, ep_comp)) + goto found_ep; + ep = find_ep (gadget, "ep-f"); + if (ep && ep_matches(gadget, ep, desc, ep_comp)) + goto found_ep; + + } else if (gadget_is_goku (gadget)) { + if (USB_ENDPOINT_XFER_INT == type) { + /* single buffering is enough */ + ep = find_ep(gadget, "ep3-bulk"); + if (ep && ep_matches(gadget, ep, desc, ep_comp)) + goto found_ep; + } else if (USB_ENDPOINT_XFER_BULK == type + && (USB_DIR_IN & desc->bEndpointAddress)) { + /* DMA may be available */ + ep = find_ep(gadget, "ep2-bulk"); + if (ep && ep_matches(gadget, ep, desc, + ep_comp)) + goto found_ep; + } + +#ifdef CONFIG_BLACKFIN + } else if (gadget_is_musbhdrc(gadget)) { + if ((USB_ENDPOINT_XFER_BULK == type) || + (USB_ENDPOINT_XFER_ISOC == type)) { + if (USB_DIR_IN & desc->bEndpointAddress) + ep = find_ep (gadget, "ep5in"); + else + ep = find_ep (gadget, "ep6out"); + } else if (USB_ENDPOINT_XFER_INT == type) { + if (USB_DIR_IN & desc->bEndpointAddress) + ep = find_ep(gadget, "ep1in"); + else + ep = find_ep(gadget, "ep2out"); + } else + ep = NULL; + if (ep && ep_matches(gadget, ep, desc, ep_comp)) + goto found_ep; +#endif + } + + /* Second, look at endpoints until an unclaimed one looks usable */ + list_for_each_entry (ep, &gadget->ep_list, ep_list) { + if (ep_matches(gadget, ep, desc, ep_comp)) + goto found_ep; + } + + /* Fail */ + return NULL; +found_ep: + ep->desc = NULL; + ep->comp_desc = NULL; + return ep; +} + +/** + * usb_ep_autoconfig() - choose an endpoint matching the + * descriptor + * @gadget: The device to which the endpoint must belong. + * @desc: Endpoint descriptor, with endpoint direction and transfer mode + * initialized. For periodic transfers, the maximum packet + * size must also be initialized. This is modified on success. + * + * By choosing an endpoint to use with the specified descriptor, this + * routine simplifies writing gadget drivers that work with multiple + * USB device controllers. The endpoint would be passed later to + * usb_ep_enable(), along with some descriptor. + * + * That second descriptor won't always be the same as the first one. + * For example, isochronous endpoints can be autoconfigured for high + * bandwidth, and then used in several lower bandwidth altsettings. + * Also, high and full speed descriptors will be different. + * + * Be sure to examine and test the results of autoconfiguration on your + * hardware. This code may not make the best choices about how to use the + * USB controller, and it can't know all the restrictions that may apply. + * Some combinations of driver and hardware won't be able to autoconfigure. + * + * On success, this returns an un-claimed usb_ep, and modifies the endpoint + * descriptor bEndpointAddress. For bulk endpoints, the wMaxPacket value + * is initialized as if the endpoint were used at full speed. To prevent + * the endpoint from being returned by a later autoconfig call, claim it + * by assigning ep->driver_data to some non-null value. + * + * On failure, this returns a null endpoint descriptor. + */ +struct usb_ep *usb_ep_autoconfig( + struct usb_gadget *gadget, + struct usb_endpoint_descriptor *desc +) +{ + return usb_ep_autoconfig_ss(gadget, desc, NULL); +} + + +/** + * usb_ep_autoconfig_reset - reset endpoint autoconfig state + * @gadget: device for which autoconfig state will be reset + * + * Use this for devices where one configuration may need to assign + * endpoint resources very differently from the next one. It clears + * state such as ep->driver_data and the record of assigned endpoints + * used by usb_ep_autoconfig(). + */ +void usb_ep_autoconfig_reset (struct usb_gadget *gadget) +{ + struct usb_ep *ep; + + list_for_each_entry (ep, &gadget->ep_list, ep_list) { + ep->driver_data = NULL; + } +#ifdef MANY_ENDPOINTS + in_epnum = 0; +#endif + epnum = 0; +} + diff --git a/drivers/staging/ccg/f_acm.c b/drivers/staging/ccg/f_acm.c new file mode 100644 index 000000000000..d672250a61fa --- /dev/null +++ b/drivers/staging/ccg/f_acm.c @@ -0,0 +1,814 @@ +/* + * f_acm.c -- USB CDC serial (ACM) function driver + * + * Copyright (C) 2003 Al Borchers (alborchers@steinerpoint.com) + * Copyright (C) 2008 by David Brownell + * Copyright (C) 2008 by Nokia Corporation + * Copyright (C) 2009 by Samsung Electronics + * Author: Michal Nazarewicz (mina86@mina86.com) + * + * This software is distributed under the terms of the GNU General + * Public License ("GPL") as published by the Free Software Foundation, + * either version 2 of that License or (at your option) any later version. + */ + +/* #define VERBOSE_DEBUG */ + +#include <linux/slab.h> +#include <linux/kernel.h> +#include <linux/device.h> + +#include "u_serial.h" +#include "gadget_chips.h" + + +/* + * This CDC ACM function support just wraps control functions and + * notifications around the generic serial-over-usb code. + * + * Because CDC ACM is standardized by the USB-IF, many host operating + * systems have drivers for it. Accordingly, ACM is the preferred + * interop solution for serial-port type connections. The control + * models are often not necessary, and in any case don't do much in + * this bare-bones implementation. + * + * Note that even MS-Windows has some support for ACM. However, that + * support is somewhat broken because when you use ACM in a composite + * device, having multiple interfaces confuses the poor OS. It doesn't + * seem to understand CDC Union descriptors. The new "association" + * descriptors (roughly equivalent to CDC Unions) may sometimes help. + */ + +struct f_acm { + struct gserial port; + u8 ctrl_id, data_id; + u8 port_num; + + u8 pending; + + /* lock is mostly for pending and notify_req ... they get accessed + * by callbacks both from tty (open/close/break) under its spinlock, + * and notify_req.complete() which can't use that lock. + */ + spinlock_t lock; + + struct usb_ep *notify; + struct usb_request *notify_req; + + struct usb_cdc_line_coding port_line_coding; /* 8-N-1 etc */ + + /* SetControlLineState request -- CDC 1.1 section 6.2.14 (INPUT) */ + u16 port_handshake_bits; +#define ACM_CTRL_RTS (1 << 1) /* unused with full duplex */ +#define ACM_CTRL_DTR (1 << 0) /* host is ready for data r/w */ + + /* SerialState notification -- CDC 1.1 section 6.3.5 (OUTPUT) */ + u16 serial_state; +#define ACM_CTRL_OVERRUN (1 << 6) +#define ACM_CTRL_PARITY (1 << 5) +#define ACM_CTRL_FRAMING (1 << 4) +#define ACM_CTRL_RI (1 << 3) +#define ACM_CTRL_BRK (1 << 2) +#define ACM_CTRL_DSR (1 << 1) +#define ACM_CTRL_DCD (1 << 0) +}; + +static inline struct f_acm *func_to_acm(struct usb_function *f) +{ + return container_of(f, struct f_acm, port.func); +} + +static inline struct f_acm *port_to_acm(struct gserial *p) +{ + return container_of(p, struct f_acm, port); +} + +/*-------------------------------------------------------------------------*/ + +/* notification endpoint uses smallish and infrequent fixed-size messages */ + +#define GS_LOG2_NOTIFY_INTERVAL 5 /* 1 << 5 == 32 msec */ +#define GS_NOTIFY_MAXPACKET 10 /* notification + 2 bytes */ + +/* interface and class descriptors: */ + +static struct usb_interface_assoc_descriptor +acm_iad_descriptor = { + .bLength = sizeof acm_iad_descriptor, + .bDescriptorType = USB_DT_INTERFACE_ASSOCIATION, + + /* .bFirstInterface = DYNAMIC, */ + .bInterfaceCount = 2, // control + data + .bFunctionClass = USB_CLASS_COMM, + .bFunctionSubClass = USB_CDC_SUBCLASS_ACM, + .bFunctionProtocol = USB_CDC_ACM_PROTO_AT_V25TER, + /* .iFunction = DYNAMIC */ +}; + + +static struct usb_interface_descriptor acm_control_interface_desc = { + .bLength = USB_DT_INTERFACE_SIZE, + .bDescriptorType = USB_DT_INTERFACE, + /* .bInterfaceNumber = DYNAMIC */ + .bNumEndpoints = 1, + .bInterfaceClass = USB_CLASS_COMM, + .bInterfaceSubClass = USB_CDC_SUBCLASS_ACM, + .bInterfaceProtocol = USB_CDC_ACM_PROTO_AT_V25TER, + /* .iInterface = DYNAMIC */ +}; + +static struct usb_interface_descriptor acm_data_interface_desc = { + .bLength = USB_DT_INTERFACE_SIZE, + .bDescriptorType = USB_DT_INTERFACE, + /* .bInterfaceNumber = DYNAMIC */ + .bNumEndpoints = 2, + .bInterfaceClass = USB_CLASS_CDC_DATA, + .bInterfaceSubClass = 0, + .bInterfaceProtocol = 0, + /* .iInterface = DYNAMIC */ +}; + +static struct usb_cdc_header_desc acm_header_desc = { + .bLength = sizeof(acm_header_desc), + .bDescriptorType = USB_DT_CS_INTERFACE, + .bDescriptorSubType = USB_CDC_HEADER_TYPE, + .bcdCDC = cpu_to_le16(0x0110), +}; + +static struct usb_cdc_call_mgmt_descriptor +acm_call_mgmt_descriptor = { + .bLength = sizeof(acm_call_mgmt_descriptor), + .bDescriptorType = USB_DT_CS_INTERFACE, + .bDescriptorSubType = USB_CDC_CALL_MANAGEMENT_TYPE, + .bmCapabilities = 0, + /* .bDataInterface = DYNAMIC */ +}; + +static struct usb_cdc_acm_descriptor acm_descriptor = { + .bLength = sizeof(acm_descriptor), + .bDescriptorType = USB_DT_CS_INTERFACE, + .bDescriptorSubType = USB_CDC_ACM_TYPE, + .bmCapabilities = USB_CDC_CAP_LINE, +}; + +static struct usb_cdc_union_desc acm_union_desc = { + .bLength = sizeof(acm_union_desc), + .bDescriptorType = USB_DT_CS_INTERFACE, + .bDescriptorSubType = USB_CDC_UNION_TYPE, + /* .bMasterInterface0 = DYNAMIC */ + /* .bSlaveInterface0 = DYNAMIC */ +}; + +/* full speed support: */ + +static struct usb_endpoint_descriptor acm_fs_notify_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = USB_DIR_IN, + .bmAttributes = USB_ENDPOINT_XFER_INT, + .wMaxPacketSize = cpu_to_le16(GS_NOTIFY_MAXPACKET), + .bInterval = 1 << GS_LOG2_NOTIFY_INTERVAL, +}; + +static struct usb_endpoint_descriptor acm_fs_in_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = USB_DIR_IN, + .bmAttributes = USB_ENDPOINT_XFER_BULK, +}; + +static struct usb_endpoint_descriptor acm_fs_out_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = USB_DIR_OUT, + .bmAttributes = USB_ENDPOINT_XFER_BULK, +}; + +static struct usb_descriptor_header *acm_fs_function[] = { + (struct usb_descriptor_header *) &acm_iad_descriptor, + (struct usb_descriptor_header *) &acm_control_interface_desc, + (struct usb_descriptor_header *) &acm_header_desc, + (struct usb_descriptor_header *) &acm_call_mgmt_descriptor, + (struct usb_descriptor_header *) &acm_descriptor, + (struct usb_descriptor_header *) &acm_union_desc, + (struct usb_descriptor_header *) &acm_fs_notify_desc, + (struct usb_descriptor_header *) &acm_data_interface_desc, + (struct usb_descriptor_header *) &acm_fs_in_desc, + (struct usb_descriptor_header *) &acm_fs_out_desc, + NULL, +}; + +/* high speed support: */ + +static struct usb_endpoint_descriptor acm_hs_notify_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = USB_DIR_IN, + .bmAttributes = USB_ENDPOINT_XFER_INT, + .wMaxPacketSize = cpu_to_le16(GS_NOTIFY_MAXPACKET), + .bInterval = GS_LOG2_NOTIFY_INTERVAL+4, +}; + +static struct usb_endpoint_descriptor acm_hs_in_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .wMaxPacketSize = cpu_to_le16(512), +}; + +static struct usb_endpoint_descriptor acm_hs_out_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .wMaxPacketSize = cpu_to_le16(512), +}; + +static struct usb_descriptor_header *acm_hs_function[] = { + (struct usb_descriptor_header *) &acm_iad_descriptor, + (struct usb_descriptor_header *) &acm_control_interface_desc, + (struct usb_descriptor_header *) &acm_header_desc, + (struct usb_descriptor_header *) &acm_call_mgmt_descriptor, + (struct usb_descriptor_header *) &acm_descriptor, + (struct usb_descriptor_header *) &acm_union_desc, + (struct usb_descriptor_header *) &acm_hs_notify_desc, + (struct usb_descriptor_header *) &acm_data_interface_desc, + (struct usb_descriptor_header *) &acm_hs_in_desc, + (struct usb_descriptor_header *) &acm_hs_out_desc, + NULL, +}; + +static struct usb_endpoint_descriptor acm_ss_in_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .wMaxPacketSize = cpu_to_le16(1024), +}; + +static struct usb_endpoint_descriptor acm_ss_out_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .wMaxPacketSize = cpu_to_le16(1024), +}; + +static struct usb_ss_ep_comp_descriptor acm_ss_bulk_comp_desc = { + .bLength = sizeof acm_ss_bulk_comp_desc, + .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, +}; + +static struct usb_descriptor_header *acm_ss_function[] = { + (struct usb_descriptor_header *) &acm_iad_descriptor, + (struct usb_descriptor_header *) &acm_control_interface_desc, + (struct usb_descriptor_header *) &acm_header_desc, + (struct usb_descriptor_header *) &acm_call_mgmt_descriptor, + (struct usb_descriptor_header *) &acm_descriptor, + (struct usb_descriptor_header *) &acm_union_desc, + (struct usb_descriptor_header *) &acm_hs_notify_desc, + (struct usb_descriptor_header *) &acm_ss_bulk_comp_desc, + (struct usb_descriptor_header *) &acm_data_interface_desc, + (struct usb_descriptor_header *) &acm_ss_in_desc, + (struct usb_descriptor_header *) &acm_ss_bulk_comp_desc, + (struct usb_descriptor_header *) &acm_ss_out_desc, + (struct usb_descriptor_header *) &acm_ss_bulk_comp_desc, + NULL, +}; + +/* string descriptors: */ + +#define ACM_CTRL_IDX 0 +#define ACM_DATA_IDX 1 +#define ACM_IAD_IDX 2 + +/* static strings, in UTF-8 */ +static struct usb_string acm_string_defs[] = { + [ACM_CTRL_IDX].s = "CDC Abstract Control Model (ACM)", + [ACM_DATA_IDX].s = "CDC ACM Data", + [ACM_IAD_IDX ].s = "CDC Serial", + { /* ZEROES END LIST */ }, +}; + +static struct usb_gadget_strings acm_string_table = { + .language = 0x0409, /* en-us */ + .strings = acm_string_defs, +}; + +static struct usb_gadget_strings *acm_strings[] = { + &acm_string_table, + NULL, +}; + +/*-------------------------------------------------------------------------*/ + +/* ACM control ... data handling is delegated to tty library code. + * The main task of this function is to activate and deactivate + * that code based on device state; track parameters like line + * speed, handshake state, and so on; and issue notifications. + */ + +static void acm_complete_set_line_coding(struct usb_ep *ep, + struct usb_request *req) +{ + struct f_acm *acm = ep->driver_data; + struct usb_composite_dev *cdev = acm->port.func.config->cdev; + + if (req->status != 0) { + DBG(cdev, "acm ttyGS%d completion, err %d\n", + acm->port_num, req->status); + return; + } + + /* normal completion */ + if (req->actual != sizeof(acm->port_line_coding)) { + DBG(cdev, "acm ttyGS%d short resp, len %d\n", + acm->port_num, req->actual); + usb_ep_set_halt(ep); + } else { + struct usb_cdc_line_coding *value = req->buf; + + /* REVISIT: we currently just remember this data. + * If we change that, (a) validate it first, then + * (b) update whatever hardware needs updating, + * (c) worry about locking. This is information on + * the order of 9600-8-N-1 ... most of which means + * nothing unless we control a real RS232 line. + */ + acm->port_line_coding = *value; + } +} + +static int acm_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl) +{ + struct f_acm *acm = func_to_acm(f); + struct usb_composite_dev *cdev = f->config->cdev; + struct usb_request *req = cdev->req; + int value = -EOPNOTSUPP; + u16 w_index = le16_to_cpu(ctrl->wIndex); + u16 w_value = le16_to_cpu(ctrl->wValue); + u16 w_length = le16_to_cpu(ctrl->wLength); + + /* composite driver infrastructure handles everything except + * CDC class messages; interface activation uses set_alt(). + * + * Note CDC spec table 4 lists the ACM request profile. It requires + * encapsulated command support ... we don't handle any, and respond + * to them by stalling. Options include get/set/clear comm features + * (not that useful) and SEND_BREAK. + */ + switch ((ctrl->bRequestType << 8) | ctrl->bRequest) { + + /* SET_LINE_CODING ... just read and save what the host sends */ + case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8) + | USB_CDC_REQ_SET_LINE_CODING: + if (w_length != sizeof(struct usb_cdc_line_coding) + || w_index != acm->ctrl_id) + goto invalid; + + value = w_length; + cdev->gadget->ep0->driver_data = acm; + req->complete = acm_complete_set_line_coding; + break; + + /* GET_LINE_CODING ... return what host sent, or initial value */ + case ((USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8) + | USB_CDC_REQ_GET_LINE_CODING: + if (w_index != acm->ctrl_id) + goto invalid; + + value = min_t(unsigned, w_length, + sizeof(struct usb_cdc_line_coding)); + memcpy(req->buf, &acm->port_line_coding, value); + break; + + /* SET_CONTROL_LINE_STATE ... save what the host sent */ + case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8) + | USB_CDC_REQ_SET_CONTROL_LINE_STATE: + if (w_index != acm->ctrl_id) + goto invalid; + + value = 0; + + /* FIXME we should not allow data to flow until the + * host sets the ACM_CTRL_DTR bit; and when it clears + * that bit, we should return to that no-flow state. + */ + acm->port_handshake_bits = w_value; + break; + + default: +invalid: + VDBG(cdev, "invalid control req%02x.%02x v%04x i%04x l%d\n", + ctrl->bRequestType, ctrl->bRequest, + w_value, w_index, w_length); + } + + /* respond with data transfer or status phase? */ + if (value >= 0) { + DBG(cdev, "acm ttyGS%d req%02x.%02x v%04x i%04x l%d\n", + acm->port_num, ctrl->bRequestType, ctrl->bRequest, + w_value, w_index, w_length); + req->zero = 0; + req->length = value; + value = usb_ep_queue(cdev->gadget->ep0, req, GFP_ATOMIC); + if (value < 0) + ERROR(cdev, "acm response on ttyGS%d, err %d\n", + acm->port_num, value); + } + + /* device either stalls (value < 0) or reports success */ + return value; +} + +static int acm_set_alt(struct usb_function *f, unsigned intf, unsigned alt) +{ + struct f_acm *acm = func_to_acm(f); + struct usb_composite_dev *cdev = f->config->cdev; + + /* we know alt == 0, so this is an activation or a reset */ + + if (intf == acm->ctrl_id) { + if (acm->notify->driver_data) { + VDBG(cdev, "reset acm control interface %d\n", intf); + usb_ep_disable(acm->notify); + } else { + VDBG(cdev, "init acm ctrl interface %d\n", intf); + if (config_ep_by_speed(cdev->gadget, f, acm->notify)) + return -EINVAL; + } + usb_ep_enable(acm->notify); + acm->notify->driver_data = acm; + + } else if (intf == acm->data_id) { + if (acm->port.in->driver_data) { + DBG(cdev, "reset acm ttyGS%d\n", acm->port_num); + gserial_disconnect(&acm->port); + } + if (!acm->port.in->desc || !acm->port.out->desc) { + DBG(cdev, "activate acm ttyGS%d\n", acm->port_num); + if (config_ep_by_speed(cdev->gadget, f, + acm->port.in) || + config_ep_by_speed(cdev->gadget, f, + acm->port.out)) { + acm->port.in->desc = NULL; + acm->port.out->desc = NULL; + return -EINVAL; + } + } + gserial_connect(&acm->port, acm->port_num); + + } else + return -EINVAL; + + return 0; +} + +static void acm_disable(struct usb_function *f) +{ + struct f_acm *acm = func_to_acm(f); + struct usb_composite_dev *cdev = f->config->cdev; + + DBG(cdev, "acm ttyGS%d deactivated\n", acm->port_num); + gserial_disconnect(&acm->port); + usb_ep_disable(acm->notify); + acm->notify->driver_data = NULL; +} + +/*-------------------------------------------------------------------------*/ + +/** + * acm_cdc_notify - issue CDC notification to host + * @acm: wraps host to be notified + * @type: notification type + * @value: Refer to cdc specs, wValue field. + * @data: data to be sent + * @length: size of data + * Context: irqs blocked, acm->lock held, acm_notify_req non-null + * + * Returns zero on success or a negative errno. + * + * See section 6.3.5 of the CDC 1.1 specification for information + * about the only notification we issue: SerialState change. + */ +static int acm_cdc_notify(struct f_acm *acm, u8 type, u16 value, + void *data, unsigned length) +{ + struct usb_ep *ep = acm->notify; + struct usb_request *req; + struct usb_cdc_notification *notify; + const unsigned len = sizeof(*notify) + length; + void *buf; + int status; + + req = acm->notify_req; + acm->notify_req = NULL; + acm->pending = false; + + req->length = len; + notify = req->buf; + buf = notify + 1; + + notify->bmRequestType = USB_DIR_IN | USB_TYPE_CLASS + | USB_RECIP_INTERFACE; + notify->bNotificationType = type; + notify->wValue = cpu_to_le16(value); + notify->wIndex = cpu_to_le16(acm->ctrl_id); + notify->wLength = cpu_to_le16(length); + memcpy(buf, data, length); + + /* ep_queue() can complete immediately if it fills the fifo... */ + spin_unlock(&acm->lock); + status = usb_ep_queue(ep, req, GFP_ATOMIC); + spin_lock(&acm->lock); + + if (status < 0) { + ERROR(acm->port.func.config->cdev, + "acm ttyGS%d can't notify serial state, %d\n", + acm->port_num, status); + acm->notify_req = req; + } + + return status; +} + +static int acm_notify_serial_state(struct f_acm *acm) +{ + struct usb_composite_dev *cdev = acm->port.func.config->cdev; + int status; + + spin_lock(&acm->lock); + if (acm->notify_req) { + DBG(cdev, "acm ttyGS%d serial state %04x\n", + acm->port_num, acm->serial_state); + status = acm_cdc_notify(acm, USB_CDC_NOTIFY_SERIAL_STATE, + 0, &acm->serial_state, sizeof(acm->serial_state)); + } else { + acm->pending = true; + status = 0; + } + spin_unlock(&acm->lock); + return status; +} + +static void acm_cdc_notify_complete(struct usb_ep *ep, struct usb_request *req) +{ + struct f_acm *acm = req->context; + u8 doit = false; + + /* on this call path we do NOT hold the port spinlock, + * which is why ACM needs its own spinlock + */ + spin_lock(&acm->lock); + if (req->status != -ESHUTDOWN) + doit = acm->pending; + acm->notify_req = req; + spin_unlock(&acm->lock); + + if (doit) + acm_notify_serial_state(acm); +} + +/* connect == the TTY link is open */ + +static void acm_connect(struct gserial *port) +{ + struct f_acm *acm = port_to_acm(port); + + acm->serial_state |= ACM_CTRL_DSR | ACM_CTRL_DCD; + acm_notify_serial_state(acm); +} + +static void acm_disconnect(struct gserial *port) +{ + struct f_acm *acm = port_to_acm(port); + + acm->serial_state &= ~(ACM_CTRL_DSR | ACM_CTRL_DCD); + acm_notify_serial_state(acm); +} + +static int acm_send_break(struct gserial *port, int duration) +{ + struct f_acm *acm = port_to_acm(port); + u16 state; + + state = acm->serial_state; + state &= ~ACM_CTRL_BRK; + if (duration) + state |= ACM_CTRL_BRK; + + acm->serial_state = state; + return acm_notify_serial_state(acm); +} + +/*-------------------------------------------------------------------------*/ + +/* ACM function driver setup/binding */ +static int +acm_bind(struct usb_configuration *c, struct usb_function *f) +{ + struct usb_composite_dev *cdev = c->cdev; + struct f_acm *acm = func_to_acm(f); + int status; + struct usb_ep *ep; + + /* allocate instance-specific interface IDs, and patch descriptors */ + status = usb_interface_id(c, f); + if (status < 0) + goto fail; + acm->ctrl_id = status; + acm_iad_descriptor.bFirstInterface = status; + + acm_control_interface_desc.bInterfaceNumber = status; + acm_union_desc .bMasterInterface0 = status; + + status = usb_interface_id(c, f); + if (status < 0) + goto fail; + acm->data_id = status; + + acm_data_interface_desc.bInterfaceNumber = status; + acm_union_desc.bSlaveInterface0 = status; + acm_call_mgmt_descriptor.bDataInterface = status; + + status = -ENODEV; + + /* allocate instance-specific endpoints */ + ep = usb_ep_autoconfig(cdev->gadget, &acm_fs_in_desc); + if (!ep) + goto fail; + acm->port.in = ep; + ep->driver_data = cdev; /* claim */ + + ep = usb_ep_autoconfig(cdev->gadget, &acm_fs_out_desc); + if (!ep) + goto fail; + acm->port.out = ep; + ep->driver_data = cdev; /* claim */ + + ep = usb_ep_autoconfig(cdev->gadget, &acm_fs_notify_desc); + if (!ep) + goto fail; + acm->notify = ep; + ep->driver_data = cdev; /* claim */ + + /* allocate notification */ + acm->notify_req = gs_alloc_req(ep, + sizeof(struct usb_cdc_notification) + 2, + GFP_KERNEL); + if (!acm->notify_req) + goto fail; + + acm->notify_req->complete = acm_cdc_notify_complete; + acm->notify_req->context = acm; + + /* copy descriptors */ + f->descriptors = usb_copy_descriptors(acm_fs_function); + if (!f->descriptors) + goto fail; + + /* support all relevant hardware speeds... we expect that when + * hardware is dual speed, all bulk-capable endpoints work at + * both speeds + */ + if (gadget_is_dualspeed(c->cdev->gadget)) { + acm_hs_in_desc.bEndpointAddress = + acm_fs_in_desc.bEndpointAddress; + acm_hs_out_desc.bEndpointAddress = + acm_fs_out_desc.bEndpointAddress; + acm_hs_notify_desc.bEndpointAddress = + acm_fs_notify_desc.bEndpointAddress; + + /* copy descriptors */ + f->hs_descriptors = usb_copy_descriptors(acm_hs_function); + } + if (gadget_is_superspeed(c->cdev->gadget)) { + acm_ss_in_desc.bEndpointAddress = + acm_fs_in_desc.bEndpointAddress; + acm_ss_out_desc.bEndpointAddress = + acm_fs_out_desc.bEndpointAddress; + + /* copy descriptors, and track endpoint copies */ + f->ss_descriptors = usb_copy_descriptors(acm_ss_function); + if (!f->ss_descriptors) + goto fail; + } + + DBG(cdev, "acm ttyGS%d: %s speed IN/%s OUT/%s NOTIFY/%s\n", + acm->port_num, + gadget_is_superspeed(c->cdev->gadget) ? "super" : + gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full", + acm->port.in->name, acm->port.out->name, + acm->notify->name); + return 0; + +fail: + if (acm->notify_req) + gs_free_req(acm->notify, acm->notify_req); + + /* we might as well release our claims on endpoints */ + if (acm->notify) + acm->notify->driver_data = NULL; + if (acm->port.out) + acm->port.out->driver_data = NULL; + if (acm->port.in) + acm->port.in->driver_data = NULL; + + ERROR(cdev, "%s/%p: can't bind, err %d\n", f->name, f, status); + + return status; +} + +static void +acm_unbind(struct usb_configuration *c, struct usb_function *f) +{ + struct f_acm *acm = func_to_acm(f); + + if (gadget_is_dualspeed(c->cdev->gadget)) + usb_free_descriptors(f->hs_descriptors); + if (gadget_is_superspeed(c->cdev->gadget)) + usb_free_descriptors(f->ss_descriptors); + usb_free_descriptors(f->descriptors); + gs_free_req(acm->notify, acm->notify_req); + kfree(acm); +} + +/* Some controllers can't support CDC ACM ... */ +static inline bool can_support_cdc(struct usb_configuration *c) +{ + /* everything else is *probably* fine ... */ + return true; +} + +/** + * acm_bind_config - add a CDC ACM function to a configuration + * @c: the configuration to support the CDC ACM instance + * @port_num: /dev/ttyGS* port this interface will use + * Context: single threaded during gadget setup + * + * Returns zero on success, else negative errno. + * + * Caller must have called @gserial_setup() with enough ports to + * handle all the ones it binds. Caller is also responsible + * for calling @gserial_cleanup() before module unload. + */ +int acm_bind_config(struct usb_configuration *c, u8 port_num) +{ + struct f_acm *acm; + int status; + + if (!can_support_cdc(c)) + return -EINVAL; + + /* REVISIT might want instance-specific strings to help + * distinguish instances ... + */ + + /* maybe allocate device-global string IDs, and patch descriptors */ + if (acm_string_defs[ACM_CTRL_IDX].id == 0) { + status = usb_string_id(c->cdev); + if (status < 0) + return status; + acm_string_defs[ACM_CTRL_IDX].id = status; + + acm_control_interface_desc.iInterface = status; + + status = usb_string_id(c->cdev); + if (status < 0) + return status; + acm_string_defs[ACM_DATA_IDX].id = status; + + acm_data_interface_desc.iInterface = status; + + status = usb_string_id(c->cdev); + if (status < 0) + return status; + acm_string_defs[ACM_IAD_IDX].id = status; + + acm_iad_descriptor.iFunction = status; + } + + /* allocate and initialize one new instance */ + acm = kzalloc(sizeof *acm, GFP_KERNEL); + if (!acm) + return -ENOMEM; + + spin_lock_init(&acm->lock); + + acm->port_num = port_num; + + acm->port.connect = acm_connect; + acm->port.disconnect = acm_disconnect; + acm->port.send_break = acm_send_break; + + acm->port.func.name = "acm"; + acm->port.func.strings = acm_strings; + /* descriptors are per-instance copies */ + acm->port.func.bind = acm_bind; + acm->port.func.unbind = acm_unbind; + acm->port.func.set_alt = acm_set_alt; + acm->port.func.setup = acm_setup; + acm->port.func.disable = acm_disable; + + status = usb_add_function(c, &acm->port.func); + if (status) + kfree(acm); + return status; +} diff --git a/drivers/staging/ccg/f_fs.c b/drivers/staging/ccg/f_fs.c new file mode 100644 index 000000000000..8adc79d1b402 --- /dev/null +++ b/drivers/staging/ccg/f_fs.c @@ -0,0 +1,2455 @@ +/* + * f_fs.c -- user mode file system API for USB composite function controllers + * + * Copyright (C) 2010 Samsung Electronics + * Author: Michal Nazarewicz <mina86@mina86.com> + * + * Based on inode.c (GadgetFS) which was: + * Copyright (C) 2003-2004 David Brownell + * Copyright (C) 2003 Agilent Technologies + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + + +/* #define DEBUG */ +/* #define VERBOSE_DEBUG */ + +#include <linux/blkdev.h> +#include <linux/pagemap.h> +#include <linux/export.h> +#include <linux/hid.h> +#include <asm/unaligned.h> + +#include <linux/usb/composite.h> +#include <linux/usb/functionfs.h> + + +#define FUNCTIONFS_MAGIC 0xa647361 /* Chosen by a honest dice roll ;) */ + + +/* Debugging ****************************************************************/ + +#ifdef VERBOSE_DEBUG +# define pr_vdebug pr_debug +# define ffs_dump_mem(prefix, ptr, len) \ + print_hex_dump_bytes(pr_fmt(prefix ": "), DUMP_PREFIX_NONE, ptr, len) +#else +# define pr_vdebug(...) do { } while (0) +# define ffs_dump_mem(prefix, ptr, len) do { } while (0) +#endif /* VERBOSE_DEBUG */ + +#define ENTER() pr_vdebug("%s()\n", __func__) + + +/* The data structure and setup file ****************************************/ + +enum ffs_state { + /* + * Waiting for descriptors and strings. + * + * In this state no open(2), read(2) or write(2) on epfiles + * may succeed (which should not be the problem as there + * should be no such files opened in the first place). + */ + FFS_READ_DESCRIPTORS, + FFS_READ_STRINGS, + + /* + * We've got descriptors and strings. We are or have called + * functionfs_ready_callback(). functionfs_bind() may have + * been called but we don't know. + * + * This is the only state in which operations on epfiles may + * succeed. + */ + FFS_ACTIVE, + + /* + * All endpoints have been closed. This state is also set if + * we encounter an unrecoverable error. The only + * unrecoverable error is situation when after reading strings + * from user space we fail to initialise epfiles or + * functionfs_ready_callback() returns with error (<0). + * + * In this state no open(2), read(2) or write(2) (both on ep0 + * as well as epfile) may succeed (at this point epfiles are + * unlinked and all closed so this is not a problem; ep0 is + * also closed but ep0 file exists and so open(2) on ep0 must + * fail). + */ + FFS_CLOSING +}; + + +enum ffs_setup_state { + /* There is no setup request pending. */ + FFS_NO_SETUP, + /* + * User has read events and there was a setup request event + * there. The next read/write on ep0 will handle the + * request. + */ + FFS_SETUP_PENDING, + /* + * There was event pending but before user space handled it + * some other event was introduced which canceled existing + * setup. If this state is set read/write on ep0 return + * -EIDRM. This state is only set when adding event. + */ + FFS_SETUP_CANCELED +}; + + + +struct ffs_epfile; +struct ffs_function; + +struct ffs_data { + struct usb_gadget *gadget; + + /* + * Protect access read/write operations, only one read/write + * at a time. As a consequence protects ep0req and company. + * While setup request is being processed (queued) this is + * held. + */ + struct mutex mutex; + + /* + * Protect access to endpoint related structures (basically + * usb_ep_queue(), usb_ep_dequeue(), etc. calls) except for + * endpoint zero. + */ + spinlock_t eps_lock; + + /* + * XXX REVISIT do we need our own request? Since we are not + * handling setup requests immediately user space may be so + * slow that another setup will be sent to the gadget but this + * time not to us but another function and then there could be + * a race. Is that the case? Or maybe we can use cdev->req + * after all, maybe we just need some spinlock for that? + */ + struct usb_request *ep0req; /* P: mutex */ + struct completion ep0req_completion; /* P: mutex */ + int ep0req_status; /* P: mutex */ + + /* reference counter */ + atomic_t ref; + /* how many files are opened (EP0 and others) */ + atomic_t opened; + + /* EP0 state */ + enum ffs_state state; + + /* + * Possible transitions: + * + FFS_NO_SETUP -> FFS_SETUP_PENDING -- P: ev.waitq.lock + * happens only in ep0 read which is P: mutex + * + FFS_SETUP_PENDING -> FFS_NO_SETUP -- P: ev.waitq.lock + * happens only in ep0 i/o which is P: mutex + * + FFS_SETUP_PENDING -> FFS_SETUP_CANCELED -- P: ev.waitq.lock + * + FFS_SETUP_CANCELED -> FFS_NO_SETUP -- cmpxchg + */ + enum ffs_setup_state setup_state; + +#define FFS_SETUP_STATE(ffs) \ + ((enum ffs_setup_state)cmpxchg(&(ffs)->setup_state, \ + FFS_SETUP_CANCELED, FFS_NO_SETUP)) + + /* Events & such. */ + struct { + u8 types[4]; + unsigned short count; + /* XXX REVISIT need to update it in some places, or do we? */ + unsigned short can_stall; + struct usb_ctrlrequest setup; + + wait_queue_head_t waitq; + } ev; /* the whole structure, P: ev.waitq.lock */ + + /* Flags */ + unsigned long flags; +#define FFS_FL_CALL_CLOSED_CALLBACK 0 +#define FFS_FL_BOUND 1 + + /* Active function */ + struct ffs_function *func; + + /* + * Device name, write once when file system is mounted. + * Intended for user to read if she wants. + */ + const char *dev_name; + /* Private data for our user (ie. gadget). Managed by user. */ + void *private_data; + + /* filled by __ffs_data_got_descs() */ + /* + * Real descriptors are 16 bytes after raw_descs (so you need + * to skip 16 bytes (ie. ffs->raw_descs + 16) to get to the + * first full speed descriptor). raw_descs_length and + * raw_fs_descs_length do not have those 16 bytes added. + */ + const void *raw_descs; + unsigned raw_descs_length; + unsigned raw_fs_descs_length; + unsigned fs_descs_count; + unsigned hs_descs_count; + + unsigned short strings_count; + unsigned short interfaces_count; + unsigned short eps_count; + unsigned short _pad1; + + /* filled by __ffs_data_got_strings() */ + /* ids in stringtabs are set in functionfs_bind() */ + const void *raw_strings; + struct usb_gadget_strings **stringtabs; + + /* + * File system's super block, write once when file system is + * mounted. + */ + struct super_block *sb; + + /* File permissions, written once when fs is mounted */ + struct ffs_file_perms { + umode_t mode; + uid_t uid; + gid_t gid; + } file_perms; + + /* + * The endpoint files, filled by ffs_epfiles_create(), + * destroyed by ffs_epfiles_destroy(). + */ + struct ffs_epfile *epfiles; +}; + +/* Reference counter handling */ +static void ffs_data_get(struct ffs_data *ffs); +static void ffs_data_put(struct ffs_data *ffs); +/* Creates new ffs_data object. */ +static struct ffs_data *__must_check ffs_data_new(void) __attribute__((malloc)); + +/* Opened counter handling. */ +static void ffs_data_opened(struct ffs_data *ffs); +static void ffs_data_closed(struct ffs_data *ffs); + +/* Called with ffs->mutex held; take over ownership of data. */ +static int __must_check +__ffs_data_got_descs(struct ffs_data *ffs, char *data, size_t len); +static int __must_check +__ffs_data_got_strings(struct ffs_data *ffs, char *data, size_t len); + + +/* The function structure ***************************************************/ + +struct ffs_ep; + +struct ffs_function { + struct usb_configuration *conf; + struct usb_gadget *gadget; + struct ffs_data *ffs; + + struct ffs_ep *eps; + u8 eps_revmap[16]; + short *interfaces_nums; + + struct usb_function function; +}; + + +static struct ffs_function *ffs_func_from_usb(struct usb_function *f) +{ + return container_of(f, struct ffs_function, function); +} + +static void ffs_func_free(struct ffs_function *func); + +static void ffs_func_eps_disable(struct ffs_function *func); +static int __must_check ffs_func_eps_enable(struct ffs_function *func); + +static int ffs_func_bind(struct usb_configuration *, + struct usb_function *); +static void ffs_func_unbind(struct usb_configuration *, + struct usb_function *); +static int ffs_func_set_alt(struct usb_function *, unsigned, unsigned); +static void ffs_func_disable(struct usb_function *); +static int ffs_func_setup(struct usb_function *, + const struct usb_ctrlrequest *); +static void ffs_func_suspend(struct usb_function *); +static void ffs_func_resume(struct usb_function *); + + +static int ffs_func_revmap_ep(struct ffs_function *func, u8 num); +static int ffs_func_revmap_intf(struct ffs_function *func, u8 intf); + + +/* The endpoints structures *************************************************/ + +struct ffs_ep { + struct usb_ep *ep; /* P: ffs->eps_lock */ + struct usb_request *req; /* P: epfile->mutex */ + + /* [0]: full speed, [1]: high speed */ + struct usb_endpoint_descriptor *descs[2]; + + u8 num; + + int status; /* P: epfile->mutex */ +}; + +struct ffs_epfile { + /* Protects ep->ep and ep->req. */ + struct mutex mutex; + wait_queue_head_t wait; + + struct ffs_data *ffs; + struct ffs_ep *ep; /* P: ffs->eps_lock */ + + struct dentry *dentry; + + char name[5]; + + unsigned char in; /* P: ffs->eps_lock */ + unsigned char isoc; /* P: ffs->eps_lock */ + + unsigned char _pad; +}; + +static int __must_check ffs_epfiles_create(struct ffs_data *ffs); +static void ffs_epfiles_destroy(struct ffs_epfile *epfiles, unsigned count); + +static struct inode *__must_check +ffs_sb_create_file(struct super_block *sb, const char *name, void *data, + const struct file_operations *fops, + struct dentry **dentry_p); + + +/* Misc helper functions ****************************************************/ + +static int ffs_mutex_lock(struct mutex *mutex, unsigned nonblock) + __attribute__((warn_unused_result, nonnull)); +static char *ffs_prepare_buffer(const char * __user buf, size_t len) + __attribute__((warn_unused_result, nonnull)); + + +/* Control file aka ep0 *****************************************************/ + +static void ffs_ep0_complete(struct usb_ep *ep, struct usb_request *req) +{ + struct ffs_data *ffs = req->context; + + complete_all(&ffs->ep0req_completion); +} + +static int __ffs_ep0_queue_wait(struct ffs_data *ffs, char *data, size_t len) +{ + struct usb_request *req = ffs->ep0req; + int ret; + + req->zero = len < le16_to_cpu(ffs->ev.setup.wLength); + + spin_unlock_irq(&ffs->ev.waitq.lock); + + req->buf = data; + req->length = len; + + /* + * UDC layer requires to provide a buffer even for ZLP, but should + * not use it at all. Let's provide some poisoned pointer to catch + * possible bug in the driver. + */ + if (req->buf == NULL) + req->buf = (void *)0xDEADBABE; + + INIT_COMPLETION(ffs->ep0req_completion); + + ret = usb_ep_queue(ffs->gadget->ep0, req, GFP_ATOMIC); + if (unlikely(ret < 0)) + return ret; + + ret = wait_for_completion_interruptible(&ffs->ep0req_completion); + if (unlikely(ret)) { + usb_ep_dequeue(ffs->gadget->ep0, req); + return -EINTR; + } + + ffs->setup_state = FFS_NO_SETUP; + return ffs->ep0req_status; +} + +static int __ffs_ep0_stall(struct ffs_data *ffs) +{ + if (ffs->ev.can_stall) { + pr_vdebug("ep0 stall\n"); + usb_ep_set_halt(ffs->gadget->ep0); + ffs->setup_state = FFS_NO_SETUP; + return -EL2HLT; + } else { + pr_debug("bogus ep0 stall!\n"); + return -ESRCH; + } +} + +static ssize_t ffs_ep0_write(struct file *file, const char __user *buf, + size_t len, loff_t *ptr) +{ + struct ffs_data *ffs = file->private_data; + ssize_t ret; + char *data; + + ENTER(); + + /* Fast check if setup was canceled */ + if (FFS_SETUP_STATE(ffs) == FFS_SETUP_CANCELED) + return -EIDRM; + + /* Acquire mutex */ + ret = ffs_mutex_lock(&ffs->mutex, file->f_flags & O_NONBLOCK); + if (unlikely(ret < 0)) + return ret; + + /* Check state */ + switch (ffs->state) { + case FFS_READ_DESCRIPTORS: + case FFS_READ_STRINGS: + /* Copy data */ + if (unlikely(len < 16)) { + ret = -EINVAL; + break; + } + + data = ffs_prepare_buffer(buf, len); + if (IS_ERR(data)) { + ret = PTR_ERR(data); + break; + } + + /* Handle data */ + if (ffs->state == FFS_READ_DESCRIPTORS) { + pr_info("read descriptors\n"); + ret = __ffs_data_got_descs(ffs, data, len); + if (unlikely(ret < 0)) + break; + + ffs->state = FFS_READ_STRINGS; + ret = len; + } else { + pr_info("read strings\n"); + ret = __ffs_data_got_strings(ffs, data, len); + if (unlikely(ret < 0)) + break; + + ret = ffs_epfiles_create(ffs); + if (unlikely(ret)) { + ffs->state = FFS_CLOSING; + break; + } + + ffs->state = FFS_ACTIVE; + mutex_unlock(&ffs->mutex); + + ret = functionfs_ready_callback(ffs); + if (unlikely(ret < 0)) { + ffs->state = FFS_CLOSING; + return ret; + } + + set_bit(FFS_FL_CALL_CLOSED_CALLBACK, &ffs->flags); + return len; + } + break; + + case FFS_ACTIVE: + data = NULL; + /* + * We're called from user space, we can use _irq + * rather then _irqsave + */ + spin_lock_irq(&ffs->ev.waitq.lock); + switch (FFS_SETUP_STATE(ffs)) { + case FFS_SETUP_CANCELED: + ret = -EIDRM; + goto done_spin; + + case FFS_NO_SETUP: + ret = -ESRCH; + goto done_spin; + + case FFS_SETUP_PENDING: + break; + } + + /* FFS_SETUP_PENDING */ + if (!(ffs->ev.setup.bRequestType & USB_DIR_IN)) { + spin_unlock_irq(&ffs->ev.waitq.lock); + ret = __ffs_ep0_stall(ffs); + break; + } + + /* FFS_SETUP_PENDING and not stall */ + len = min(len, (size_t)le16_to_cpu(ffs->ev.setup.wLength)); + + spin_unlock_irq(&ffs->ev.waitq.lock); + + data = ffs_prepare_buffer(buf, len); + if (IS_ERR(data)) { + ret = PTR_ERR(data); + break; + } + + spin_lock_irq(&ffs->ev.waitq.lock); + + /* + * We are guaranteed to be still in FFS_ACTIVE state + * but the state of setup could have changed from + * FFS_SETUP_PENDING to FFS_SETUP_CANCELED so we need + * to check for that. If that happened we copied data + * from user space in vain but it's unlikely. + * + * For sure we are not in FFS_NO_SETUP since this is + * the only place FFS_SETUP_PENDING -> FFS_NO_SETUP + * transition can be performed and it's protected by + * mutex. + */ + if (FFS_SETUP_STATE(ffs) == FFS_SETUP_CANCELED) { + ret = -EIDRM; +done_spin: + spin_unlock_irq(&ffs->ev.waitq.lock); + } else { + /* unlocks spinlock */ + ret = __ffs_ep0_queue_wait(ffs, data, len); + } + kfree(data); + break; + + default: + ret = -EBADFD; + break; + } + + mutex_unlock(&ffs->mutex); + return ret; +} + +static ssize_t __ffs_ep0_read_events(struct ffs_data *ffs, char __user *buf, + size_t n) +{ + /* + * We are holding ffs->ev.waitq.lock and ffs->mutex and we need + * to release them. + */ + struct usb_functionfs_event events[n]; + unsigned i = 0; + + memset(events, 0, sizeof events); + + do { + events[i].type = ffs->ev.types[i]; + if (events[i].type == FUNCTIONFS_SETUP) { + events[i].u.setup = ffs->ev.setup; + ffs->setup_state = FFS_SETUP_PENDING; + } + } while (++i < n); + + if (n < ffs->ev.count) { + ffs->ev.count -= n; + memmove(ffs->ev.types, ffs->ev.types + n, + ffs->ev.count * sizeof *ffs->ev.types); + } else { + ffs->ev.count = 0; + } + + spin_unlock_irq(&ffs->ev.waitq.lock); + mutex_unlock(&ffs->mutex); + + return unlikely(__copy_to_user(buf, events, sizeof events)) + ? -EFAULT : sizeof events; +} + +static ssize_t ffs_ep0_read(struct file *file, char __user *buf, + size_t len, loff_t *ptr) +{ + struct ffs_data *ffs = file->private_data; + char *data = NULL; + size_t n; + int ret; + + ENTER(); + + /* Fast check if setup was canceled */ + if (FFS_SETUP_STATE(ffs) == FFS_SETUP_CANCELED) + return -EIDRM; + + /* Acquire mutex */ + ret = ffs_mutex_lock(&ffs->mutex, file->f_flags & O_NONBLOCK); + if (unlikely(ret < 0)) + return ret; + + /* Check state */ + if (ffs->state != FFS_ACTIVE) { + ret = -EBADFD; + goto done_mutex; + } + + /* + * We're called from user space, we can use _irq rather then + * _irqsave + */ + spin_lock_irq(&ffs->ev.waitq.lock); + + switch (FFS_SETUP_STATE(ffs)) { + case FFS_SETUP_CANCELED: + ret = -EIDRM; + break; + + case FFS_NO_SETUP: + n = len / sizeof(struct usb_functionfs_event); + if (unlikely(!n)) { + ret = -EINVAL; + break; + } + + if ((file->f_flags & O_NONBLOCK) && !ffs->ev.count) { + ret = -EAGAIN; + break; + } + + if (wait_event_interruptible_exclusive_locked_irq(ffs->ev.waitq, + ffs->ev.count)) { + ret = -EINTR; + break; + } + + return __ffs_ep0_read_events(ffs, buf, + min(n, (size_t)ffs->ev.count)); + + case FFS_SETUP_PENDING: + if (ffs->ev.setup.bRequestType & USB_DIR_IN) { + spin_unlock_irq(&ffs->ev.waitq.lock); + ret = __ffs_ep0_stall(ffs); + goto done_mutex; + } + + len = min(len, (size_t)le16_to_cpu(ffs->ev.setup.wLength)); + + spin_unlock_irq(&ffs->ev.waitq.lock); + + if (likely(len)) { + data = kmalloc(len, GFP_KERNEL); + if (unlikely(!data)) { + ret = -ENOMEM; + goto done_mutex; + } + } + + spin_lock_irq(&ffs->ev.waitq.lock); + + /* See ffs_ep0_write() */ + if (FFS_SETUP_STATE(ffs) == FFS_SETUP_CANCELED) { + ret = -EIDRM; + break; + } + + /* unlocks spinlock */ + ret = __ffs_ep0_queue_wait(ffs, data, len); + if (likely(ret > 0) && unlikely(__copy_to_user(buf, data, len))) + ret = -EFAULT; + goto done_mutex; + + default: + ret = -EBADFD; + break; + } + + spin_unlock_irq(&ffs->ev.waitq.lock); +done_mutex: + mutex_unlock(&ffs->mutex); + kfree(data); + return ret; +} + +static int ffs_ep0_open(struct inode *inode, struct file *file) +{ + struct ffs_data *ffs = inode->i_private; + + ENTER(); + + if (unlikely(ffs->state == FFS_CLOSING)) + return -EBUSY; + + file->private_data = ffs; + ffs_data_opened(ffs); + + return 0; +} + +static int ffs_ep0_release(struct inode *inode, struct file *file) +{ + struct ffs_data *ffs = file->private_data; + + ENTER(); + + ffs_data_closed(ffs); + + return 0; +} + +static long ffs_ep0_ioctl(struct file *file, unsigned code, unsigned long value) +{ + struct ffs_data *ffs = file->private_data; + struct usb_gadget *gadget = ffs->gadget; + long ret; + + ENTER(); + + if (code == FUNCTIONFS_INTERFACE_REVMAP) { + struct ffs_function *func = ffs->func; + ret = func ? ffs_func_revmap_intf(func, value) : -ENODEV; + } else if (gadget && gadget->ops->ioctl) { + ret = gadget->ops->ioctl(gadget, code, value); + } else { + ret = -ENOTTY; + } + + return ret; +} + +static const struct file_operations ffs_ep0_operations = { + .owner = THIS_MODULE, + .llseek = no_llseek, + + .open = ffs_ep0_open, + .write = ffs_ep0_write, + .read = ffs_ep0_read, + .release = ffs_ep0_release, + .unlocked_ioctl = ffs_ep0_ioctl, +}; + + +/* "Normal" endpoints operations ********************************************/ + +static void ffs_epfile_io_complete(struct usb_ep *_ep, struct usb_request *req) +{ + ENTER(); + if (likely(req->context)) { + struct ffs_ep *ep = _ep->driver_data; + ep->status = req->status ? req->status : req->actual; + complete(req->context); + } +} + +static ssize_t ffs_epfile_io(struct file *file, + char __user *buf, size_t len, int read) +{ + struct ffs_epfile *epfile = file->private_data; + struct ffs_ep *ep; + char *data = NULL; + ssize_t ret; + int halt; + + goto first_try; + do { + spin_unlock_irq(&epfile->ffs->eps_lock); + mutex_unlock(&epfile->mutex); + +first_try: + /* Are we still active? */ + if (WARN_ON(epfile->ffs->state != FFS_ACTIVE)) { + ret = -ENODEV; + goto error; + } + + /* Wait for endpoint to be enabled */ + ep = epfile->ep; + if (!ep) { + if (file->f_flags & O_NONBLOCK) { + ret = -EAGAIN; + goto error; + } + + if (wait_event_interruptible(epfile->wait, + (ep = epfile->ep))) { + ret = -EINTR; + goto error; + } + } + + /* Do we halt? */ + halt = !read == !epfile->in; + if (halt && epfile->isoc) { + ret = -EINVAL; + goto error; + } + + /* Allocate & copy */ + if (!halt && !data) { + data = kzalloc(len, GFP_KERNEL); + if (unlikely(!data)) + return -ENOMEM; + + if (!read && + unlikely(__copy_from_user(data, buf, len))) { + ret = -EFAULT; + goto error; + } + } + + /* We will be using request */ + ret = ffs_mutex_lock(&epfile->mutex, + file->f_flags & O_NONBLOCK); + if (unlikely(ret)) + goto error; + + /* + * We're called from user space, we can use _irq rather then + * _irqsave + */ + spin_lock_irq(&epfile->ffs->eps_lock); + + /* + * While we were acquiring mutex endpoint got disabled + * or changed? + */ + } while (unlikely(epfile->ep != ep)); + + /* Halt */ + if (unlikely(halt)) { + if (likely(epfile->ep == ep) && !WARN_ON(!ep->ep)) + usb_ep_set_halt(ep->ep); + spin_unlock_irq(&epfile->ffs->eps_lock); + ret = -EBADMSG; + } else { + /* Fire the request */ + DECLARE_COMPLETION_ONSTACK(done); + + struct usb_request *req = ep->req; + req->context = &done; + req->complete = ffs_epfile_io_complete; + req->buf = data; + req->length = len; + + ret = usb_ep_queue(ep->ep, req, GFP_ATOMIC); + + spin_unlock_irq(&epfile->ffs->eps_lock); + + if (unlikely(ret < 0)) { + /* nop */ + } else if (unlikely(wait_for_completion_interruptible(&done))) { + ret = -EINTR; + usb_ep_dequeue(ep->ep, req); + } else { + ret = ep->status; + if (read && ret > 0 && + unlikely(copy_to_user(buf, data, ret))) + ret = -EFAULT; + } + } + + mutex_unlock(&epfile->mutex); +error: + kfree(data); + return ret; +} + +static ssize_t +ffs_epfile_write(struct file *file, const char __user *buf, size_t len, + loff_t *ptr) +{ + ENTER(); + + return ffs_epfile_io(file, (char __user *)buf, len, 0); +} + +static ssize_t +ffs_epfile_read(struct file *file, char __user *buf, size_t len, loff_t *ptr) +{ + ENTER(); + + return ffs_epfile_io(file, buf, len, 1); +} + +static int +ffs_epfile_open(struct inode *inode, struct file *file) +{ + struct ffs_epfile *epfile = inode->i_private; + + ENTER(); + + if (WARN_ON(epfile->ffs->state != FFS_ACTIVE)) + return -ENODEV; + + file->private_data = epfile; + ffs_data_opened(epfile->ffs); + + return 0; +} + +static int +ffs_epfile_release(struct inode *inode, struct file *file) +{ + struct ffs_epfile *epfile = inode->i_private; + + ENTER(); + + ffs_data_closed(epfile->ffs); + + return 0; +} + +static long ffs_epfile_ioctl(struct file *file, unsigned code, + unsigned long value) +{ + struct ffs_epfile *epfile = file->private_data; + int ret; + + ENTER(); + + if (WARN_ON(epfile->ffs->state != FFS_ACTIVE)) + return -ENODEV; + + spin_lock_irq(&epfile->ffs->eps_lock); + if (likely(epfile->ep)) { + switch (code) { + case FUNCTIONFS_FIFO_STATUS: + ret = usb_ep_fifo_status(epfile->ep->ep); + break; + case FUNCTIONFS_FIFO_FLUSH: + usb_ep_fifo_flush(epfile->ep->ep); + ret = 0; + break; + case FUNCTIONFS_CLEAR_HALT: + ret = usb_ep_clear_halt(epfile->ep->ep); + break; + case FUNCTIONFS_ENDPOINT_REVMAP: + ret = epfile->ep->num; + break; + default: + ret = -ENOTTY; + } + } else { + ret = -ENODEV; + } + spin_unlock_irq(&epfile->ffs->eps_lock); + + return ret; +} + +static const struct file_operations ffs_epfile_operations = { + .owner = THIS_MODULE, + .llseek = no_llseek, + + .open = ffs_epfile_open, + .write = ffs_epfile_write, + .read = ffs_epfile_read, + .release = ffs_epfile_release, + .unlocked_ioctl = ffs_epfile_ioctl, +}; + + +/* File system and super block operations ***********************************/ + +/* + * Mounting the file system creates a controller file, used first for + * function configuration then later for event monitoring. + */ + +static struct inode *__must_check +ffs_sb_make_inode(struct super_block *sb, void *data, + const struct file_operations *fops, + const struct inode_operations *iops, + struct ffs_file_perms *perms) +{ + struct inode *inode; + + ENTER(); + + inode = new_inode(sb); + + if (likely(inode)) { + struct timespec current_time = CURRENT_TIME; + + inode->i_ino = get_next_ino(); + inode->i_mode = perms->mode; + inode->i_uid = perms->uid; + inode->i_gid = perms->gid; + inode->i_atime = current_time; + inode->i_mtime = current_time; + inode->i_ctime = current_time; + inode->i_private = data; + if (fops) + inode->i_fop = fops; + if (iops) + inode->i_op = iops; + } + + return inode; +} + +/* Create "regular" file */ +static struct inode *ffs_sb_create_file(struct super_block *sb, + const char *name, void *data, + const struct file_operations *fops, + struct dentry **dentry_p) +{ + struct ffs_data *ffs = sb->s_fs_info; + struct dentry *dentry; + struct inode *inode; + + ENTER(); + + dentry = d_alloc_name(sb->s_root, name); + if (unlikely(!dentry)) + return NULL; + + inode = ffs_sb_make_inode(sb, data, fops, NULL, &ffs->file_perms); + if (unlikely(!inode)) { + dput(dentry); + return NULL; + } + + d_add(dentry, inode); + if (dentry_p) + *dentry_p = dentry; + + return inode; +} + +/* Super block */ +static const struct super_operations ffs_sb_operations = { + .statfs = simple_statfs, + .drop_inode = generic_delete_inode, +}; + +struct ffs_sb_fill_data { + struct ffs_file_perms perms; + umode_t root_mode; + const char *dev_name; + union { + /* set by ffs_fs_mount(), read by ffs_sb_fill() */ + void *private_data; + /* set by ffs_sb_fill(), read by ffs_fs_mount */ + struct ffs_data *ffs_data; + }; +}; + +static int ffs_sb_fill(struct super_block *sb, void *_data, int silent) +{ + struct ffs_sb_fill_data *data = _data; + struct inode *inode; + struct ffs_data *ffs; + + ENTER(); + + /* Initialise data */ + ffs = ffs_data_new(); + if (unlikely(!ffs)) + goto Enomem; + + ffs->sb = sb; + ffs->dev_name = kstrdup(data->dev_name, GFP_KERNEL); + if (unlikely(!ffs->dev_name)) + goto Enomem; + ffs->file_perms = data->perms; + ffs->private_data = data->private_data; + + /* used by the caller of this function */ + data->ffs_data = ffs; + + sb->s_fs_info = ffs; + sb->s_blocksize = PAGE_CACHE_SIZE; + sb->s_blocksize_bits = PAGE_CACHE_SHIFT; + sb->s_magic = FUNCTIONFS_MAGIC; + sb->s_op = &ffs_sb_operations; + sb->s_time_gran = 1; + + /* Root inode */ + data->perms.mode = data->root_mode; + inode = ffs_sb_make_inode(sb, NULL, + &simple_dir_operations, + &simple_dir_inode_operations, + &data->perms); + sb->s_root = d_make_root(inode); + if (unlikely(!sb->s_root)) + goto Enomem; + + /* EP0 file */ + if (unlikely(!ffs_sb_create_file(sb, "ep0", ffs, + &ffs_ep0_operations, NULL))) + goto Enomem; + + return 0; + +Enomem: + return -ENOMEM; +} + +static int ffs_fs_parse_opts(struct ffs_sb_fill_data *data, char *opts) +{ + ENTER(); + + if (!opts || !*opts) + return 0; + + for (;;) { + char *end, *eq, *comma; + unsigned long value; + + /* Option limit */ + comma = strchr(opts, ','); + if (comma) + *comma = 0; + + /* Value limit */ + eq = strchr(opts, '='); + if (unlikely(!eq)) { + pr_err("'=' missing in %s\n", opts); + return -EINVAL; + } + *eq = 0; + + /* Parse value */ + value = simple_strtoul(eq + 1, &end, 0); + if (unlikely(*end != ',' && *end != 0)) { + pr_err("%s: invalid value: %s\n", opts, eq + 1); + return -EINVAL; + } + + /* Interpret option */ + switch (eq - opts) { + case 5: + if (!memcmp(opts, "rmode", 5)) + data->root_mode = (value & 0555) | S_IFDIR; + else if (!memcmp(opts, "fmode", 5)) + data->perms.mode = (value & 0666) | S_IFREG; + else + goto invalid; + break; + + case 4: + if (!memcmp(opts, "mode", 4)) { + data->root_mode = (value & 0555) | S_IFDIR; + data->perms.mode = (value & 0666) | S_IFREG; + } else { + goto invalid; + } + break; + + case 3: + if (!memcmp(opts, "uid", 3)) + data->perms.uid = value; + else if (!memcmp(opts, "gid", 3)) + data->perms.gid = value; + else + goto invalid; + break; + + default: +invalid: + pr_err("%s: invalid option\n", opts); + return -EINVAL; + } + + /* Next iteration */ + if (!comma) + break; + opts = comma + 1; + } + + return 0; +} + +/* "mount -t functionfs dev_name /dev/function" ends up here */ + +static struct dentry * +ffs_fs_mount(struct file_system_type *t, int flags, + const char *dev_name, void *opts) +{ + struct ffs_sb_fill_data data = { + .perms = { + .mode = S_IFREG | 0600, + .uid = 0, + .gid = 0 + }, + .root_mode = S_IFDIR | 0500, + }; + struct dentry *rv; + int ret; + void *ffs_dev; + + ENTER(); + + ret = ffs_fs_parse_opts(&data, opts); + if (unlikely(ret < 0)) + return ERR_PTR(ret); + + ffs_dev = functionfs_acquire_dev_callback(dev_name); + if (IS_ERR(ffs_dev)) + return ffs_dev; + + data.dev_name = dev_name; + data.private_data = ffs_dev; + rv = mount_nodev(t, flags, &data, ffs_sb_fill); + + /* data.ffs_data is set by ffs_sb_fill */ + if (IS_ERR(rv)) + functionfs_release_dev_callback(data.ffs_data); + + return rv; +} + +static void +ffs_fs_kill_sb(struct super_block *sb) +{ + ENTER(); + + kill_litter_super(sb); + if (sb->s_fs_info) { + functionfs_release_dev_callback(sb->s_fs_info); + ffs_data_put(sb->s_fs_info); + } +} + +static struct file_system_type ffs_fs_type = { + .owner = THIS_MODULE, + .name = "functionfs", + .mount = ffs_fs_mount, + .kill_sb = ffs_fs_kill_sb, +}; + + +/* Driver's main init/cleanup functions *************************************/ + +static int functionfs_init(void) +{ + int ret; + + ENTER(); + + ret = register_filesystem(&ffs_fs_type); + if (likely(!ret)) + pr_info("file system registered\n"); + else + pr_err("failed registering file system (%d)\n", ret); + + return ret; +} + +static void functionfs_cleanup(void) +{ + ENTER(); + + pr_info("unloading\n"); + unregister_filesystem(&ffs_fs_type); +} + + +/* ffs_data and ffs_function construction and destruction code **************/ + +static void ffs_data_clear(struct ffs_data *ffs); +static void ffs_data_reset(struct ffs_data *ffs); + +static void ffs_data_get(struct ffs_data *ffs) +{ + ENTER(); + + atomic_inc(&ffs->ref); +} + +static void ffs_data_opened(struct ffs_data *ffs) +{ + ENTER(); + + atomic_inc(&ffs->ref); + atomic_inc(&ffs->opened); +} + +static void ffs_data_put(struct ffs_data *ffs) +{ + ENTER(); + + if (unlikely(atomic_dec_and_test(&ffs->ref))) { + pr_info("%s(): freeing\n", __func__); + ffs_data_clear(ffs); + BUG_ON(waitqueue_active(&ffs->ev.waitq) || + waitqueue_active(&ffs->ep0req_completion.wait)); + kfree(ffs->dev_name); + kfree(ffs); + } +} + +static void ffs_data_closed(struct ffs_data *ffs) +{ + ENTER(); + + if (atomic_dec_and_test(&ffs->opened)) { + ffs->state = FFS_CLOSING; + ffs_data_reset(ffs); + } + + ffs_data_put(ffs); +} + +static struct ffs_data *ffs_data_new(void) +{ + struct ffs_data *ffs = kzalloc(sizeof *ffs, GFP_KERNEL); + if (unlikely(!ffs)) + return 0; + + ENTER(); + + atomic_set(&ffs->ref, 1); + atomic_set(&ffs->opened, 0); + ffs->state = FFS_READ_DESCRIPTORS; + mutex_init(&ffs->mutex); + spin_lock_init(&ffs->eps_lock); + init_waitqueue_head(&ffs->ev.waitq); + init_completion(&ffs->ep0req_completion); + + /* XXX REVISIT need to update it in some places, or do we? */ + ffs->ev.can_stall = 1; + + return ffs; +} + +static void ffs_data_clear(struct ffs_data *ffs) +{ + ENTER(); + + if (test_and_clear_bit(FFS_FL_CALL_CLOSED_CALLBACK, &ffs->flags)) + functionfs_closed_callback(ffs); + + BUG_ON(ffs->gadget); + + if (ffs->epfiles) + ffs_epfiles_destroy(ffs->epfiles, ffs->eps_count); + + kfree(ffs->raw_descs); + kfree(ffs->raw_strings); + kfree(ffs->stringtabs); +} + +static void ffs_data_reset(struct ffs_data *ffs) +{ + ENTER(); + + ffs_data_clear(ffs); + + ffs->epfiles = NULL; + ffs->raw_descs = NULL; + ffs->raw_strings = NULL; + ffs->stringtabs = NULL; + + ffs->raw_descs_length = 0; + ffs->raw_fs_descs_length = 0; + ffs->fs_descs_count = 0; + ffs->hs_descs_count = 0; + + ffs->strings_count = 0; + ffs->interfaces_count = 0; + ffs->eps_count = 0; + + ffs->ev.count = 0; + + ffs->state = FFS_READ_DESCRIPTORS; + ffs->setup_state = FFS_NO_SETUP; + ffs->flags = 0; +} + + +static int functionfs_bind(struct ffs_data *ffs, struct usb_composite_dev *cdev) +{ + struct usb_gadget_strings **lang; + int first_id; + + ENTER(); + + if (WARN_ON(ffs->state != FFS_ACTIVE + || test_and_set_bit(FFS_FL_BOUND, &ffs->flags))) + return -EBADFD; + + first_id = usb_string_ids_n(cdev, ffs->strings_count); + if (unlikely(first_id < 0)) + return first_id; + + ffs->ep0req = usb_ep_alloc_request(cdev->gadget->ep0, GFP_KERNEL); + if (unlikely(!ffs->ep0req)) + return -ENOMEM; + ffs->ep0req->complete = ffs_ep0_complete; + ffs->ep0req->context = ffs; + + lang = ffs->stringtabs; + for (lang = ffs->stringtabs; *lang; ++lang) { + struct usb_string *str = (*lang)->strings; + int id = first_id; + for (; str->s; ++id, ++str) + str->id = id; + } + + ffs->gadget = cdev->gadget; + ffs_data_get(ffs); + return 0; +} + +static void functionfs_unbind(struct ffs_data *ffs) +{ + ENTER(); + + if (!WARN_ON(!ffs->gadget)) { + usb_ep_free_request(ffs->gadget->ep0, ffs->ep0req); + ffs->ep0req = NULL; + ffs->gadget = NULL; + ffs_data_put(ffs); + clear_bit(FFS_FL_BOUND, &ffs->flags); + } +} + +static int ffs_epfiles_create(struct ffs_data *ffs) +{ + struct ffs_epfile *epfile, *epfiles; + unsigned i, count; + + ENTER(); + + count = ffs->eps_count; + epfiles = kcalloc(count, sizeof(*epfiles), GFP_KERNEL); + if (!epfiles) + return -ENOMEM; + + epfile = epfiles; + for (i = 1; i <= count; ++i, ++epfile) { + epfile->ffs = ffs; + mutex_init(&epfile->mutex); + init_waitqueue_head(&epfile->wait); + sprintf(epfiles->name, "ep%u", i); + if (!unlikely(ffs_sb_create_file(ffs->sb, epfiles->name, epfile, + &ffs_epfile_operations, + &epfile->dentry))) { + ffs_epfiles_destroy(epfiles, i - 1); + return -ENOMEM; + } + } + + ffs->epfiles = epfiles; + return 0; +} + +static void ffs_epfiles_destroy(struct ffs_epfile *epfiles, unsigned count) +{ + struct ffs_epfile *epfile = epfiles; + + ENTER(); + + for (; count; --count, ++epfile) { + BUG_ON(mutex_is_locked(&epfile->mutex) || + waitqueue_active(&epfile->wait)); + if (epfile->dentry) { + d_delete(epfile->dentry); + dput(epfile->dentry); + epfile->dentry = NULL; + } + } + + kfree(epfiles); +} + +static int functionfs_bind_config(struct usb_composite_dev *cdev, + struct usb_configuration *c, + struct ffs_data *ffs) +{ + struct ffs_function *func; + int ret; + + ENTER(); + + func = kzalloc(sizeof *func, GFP_KERNEL); + if (unlikely(!func)) + return -ENOMEM; + + func->function.name = "Function FS Gadget"; + func->function.strings = ffs->stringtabs; + + func->function.bind = ffs_func_bind; + func->function.unbind = ffs_func_unbind; + func->function.set_alt = ffs_func_set_alt; + func->function.disable = ffs_func_disable; + func->function.setup = ffs_func_setup; + func->function.suspend = ffs_func_suspend; + func->function.resume = ffs_func_resume; + + func->conf = c; + func->gadget = cdev->gadget; + func->ffs = ffs; + ffs_data_get(ffs); + + ret = usb_add_function(c, &func->function); + if (unlikely(ret)) + ffs_func_free(func); + + return ret; +} + +static void ffs_func_free(struct ffs_function *func) +{ + struct ffs_ep *ep = func->eps; + unsigned count = func->ffs->eps_count; + unsigned long flags; + + ENTER(); + + /* cleanup after autoconfig */ + spin_lock_irqsave(&func->ffs->eps_lock, flags); + do { + if (ep->ep && ep->req) + usb_ep_free_request(ep->ep, ep->req); + ep->req = NULL; + ++ep; + } while (--count); + spin_unlock_irqrestore(&func->ffs->eps_lock, flags); + + ffs_data_put(func->ffs); + + kfree(func->eps); + /* + * eps and interfaces_nums are allocated in the same chunk so + * only one free is required. Descriptors are also allocated + * in the same chunk. + */ + + kfree(func); +} + +static void ffs_func_eps_disable(struct ffs_function *func) +{ + struct ffs_ep *ep = func->eps; + struct ffs_epfile *epfile = func->ffs->epfiles; + unsigned count = func->ffs->eps_count; + unsigned long flags; + + spin_lock_irqsave(&func->ffs->eps_lock, flags); + do { + /* pending requests get nuked */ + if (likely(ep->ep)) + usb_ep_disable(ep->ep); + epfile->ep = NULL; + + ++ep; + ++epfile; + } while (--count); + spin_unlock_irqrestore(&func->ffs->eps_lock, flags); +} + +static int ffs_func_eps_enable(struct ffs_function *func) +{ + struct ffs_data *ffs = func->ffs; + struct ffs_ep *ep = func->eps; + struct ffs_epfile *epfile = ffs->epfiles; + unsigned count = ffs->eps_count; + unsigned long flags; + int ret = 0; + + spin_lock_irqsave(&func->ffs->eps_lock, flags); + do { + struct usb_endpoint_descriptor *ds; + ds = ep->descs[ep->descs[1] ? 1 : 0]; + + ep->ep->driver_data = ep; + ep->ep->desc = ds; + ret = usb_ep_enable(ep->ep); + if (likely(!ret)) { + epfile->ep = ep; + epfile->in = usb_endpoint_dir_in(ds); + epfile->isoc = usb_endpoint_xfer_isoc(ds); + } else { + break; + } + + wake_up(&epfile->wait); + + ++ep; + ++epfile; + } while (--count); + spin_unlock_irqrestore(&func->ffs->eps_lock, flags); + + return ret; +} + + +/* Parsing and building descriptors and strings *****************************/ + +/* + * This validates if data pointed by data is a valid USB descriptor as + * well as record how many interfaces, endpoints and strings are + * required by given configuration. Returns address after the + * descriptor or NULL if data is invalid. + */ + +enum ffs_entity_type { + FFS_DESCRIPTOR, FFS_INTERFACE, FFS_STRING, FFS_ENDPOINT +}; + +typedef int (*ffs_entity_callback)(enum ffs_entity_type entity, + u8 *valuep, + struct usb_descriptor_header *desc, + void *priv); + +static int __must_check ffs_do_desc(char *data, unsigned len, + ffs_entity_callback entity, void *priv) +{ + struct usb_descriptor_header *_ds = (void *)data; + u8 length; + int ret; + + ENTER(); + + /* At least two bytes are required: length and type */ + if (len < 2) { + pr_vdebug("descriptor too short\n"); + return -EINVAL; + } + + /* If we have at least as many bytes as the descriptor takes? */ + length = _ds->bLength; + if (len < length) { + pr_vdebug("descriptor longer then available data\n"); + return -EINVAL; + } + +#define __entity_check_INTERFACE(val) 1 +#define __entity_check_STRING(val) (val) +#define __entity_check_ENDPOINT(val) ((val) & USB_ENDPOINT_NUMBER_MASK) +#define __entity(type, val) do { \ + pr_vdebug("entity " #type "(%02x)\n", (val)); \ + if (unlikely(!__entity_check_ ##type(val))) { \ + pr_vdebug("invalid entity's value\n"); \ + return -EINVAL; \ + } \ + ret = entity(FFS_ ##type, &val, _ds, priv); \ + if (unlikely(ret < 0)) { \ + pr_debug("entity " #type "(%02x); ret = %d\n", \ + (val), ret); \ + return ret; \ + } \ + } while (0) + + /* Parse descriptor depending on type. */ + switch (_ds->bDescriptorType) { + case USB_DT_DEVICE: + case USB_DT_CONFIG: + case USB_DT_STRING: + case USB_DT_DEVICE_QUALIFIER: + /* function can't have any of those */ + pr_vdebug("descriptor reserved for gadget: %d\n", + _ds->bDescriptorType); + return -EINVAL; + + case USB_DT_INTERFACE: { + struct usb_interface_descriptor *ds = (void *)_ds; + pr_vdebug("interface descriptor\n"); + if (length != sizeof *ds) + goto inv_length; + + __entity(INTERFACE, ds->bInterfaceNumber); + if (ds->iInterface) + __entity(STRING, ds->iInterface); + } + break; + + case USB_DT_ENDPOINT: { + struct usb_endpoint_descriptor *ds = (void *)_ds; + pr_vdebug("endpoint descriptor\n"); + if (length != USB_DT_ENDPOINT_SIZE && + length != USB_DT_ENDPOINT_AUDIO_SIZE) + goto inv_length; + __entity(ENDPOINT, ds->bEndpointAddress); + } + break; + + case HID_DT_HID: + pr_vdebug("hid descriptor\n"); + if (length != sizeof(struct hid_descriptor)) + goto inv_length; + break; + + case USB_DT_OTG: + if (length != sizeof(struct usb_otg_descriptor)) + goto inv_length; + break; + + case USB_DT_INTERFACE_ASSOCIATION: { + struct usb_interface_assoc_descriptor *ds = (void *)_ds; + pr_vdebug("interface association descriptor\n"); + if (length != sizeof *ds) + goto inv_length; + if (ds->iFunction) + __entity(STRING, ds->iFunction); + } + break; + + case USB_DT_OTHER_SPEED_CONFIG: + case USB_DT_INTERFACE_POWER: + case USB_DT_DEBUG: + case USB_DT_SECURITY: + case USB_DT_CS_RADIO_CONTROL: + /* TODO */ + pr_vdebug("unimplemented descriptor: %d\n", _ds->bDescriptorType); + return -EINVAL; + + default: + /* We should never be here */ + pr_vdebug("unknown descriptor: %d\n", _ds->bDescriptorType); + return -EINVAL; + +inv_length: + pr_vdebug("invalid length: %d (descriptor %d)\n", + _ds->bLength, _ds->bDescriptorType); + return -EINVAL; + } + +#undef __entity +#undef __entity_check_DESCRIPTOR +#undef __entity_check_INTERFACE +#undef __entity_check_STRING +#undef __entity_check_ENDPOINT + + return length; +} + +static int __must_check ffs_do_descs(unsigned count, char *data, unsigned len, + ffs_entity_callback entity, void *priv) +{ + const unsigned _len = len; + unsigned long num = 0; + + ENTER(); + + for (;;) { + int ret; + + if (num == count) + data = NULL; + + /* Record "descriptor" entity */ + ret = entity(FFS_DESCRIPTOR, (u8 *)num, (void *)data, priv); + if (unlikely(ret < 0)) { + pr_debug("entity DESCRIPTOR(%02lx); ret = %d\n", + num, ret); + return ret; + } + + if (!data) + return _len - len; + + ret = ffs_do_desc(data, len, entity, priv); + if (unlikely(ret < 0)) { + pr_debug("%s returns %d\n", __func__, ret); + return ret; + } + + len -= ret; + data += ret; + ++num; + } +} + +static int __ffs_data_do_entity(enum ffs_entity_type type, + u8 *valuep, struct usb_descriptor_header *desc, + void *priv) +{ + struct ffs_data *ffs = priv; + + ENTER(); + + switch (type) { + case FFS_DESCRIPTOR: + break; + + case FFS_INTERFACE: + /* + * Interfaces are indexed from zero so if we + * encountered interface "n" then there are at least + * "n+1" interfaces. + */ + if (*valuep >= ffs->interfaces_count) + ffs->interfaces_count = *valuep + 1; + break; + + case FFS_STRING: + /* + * Strings are indexed from 1 (0 is magic ;) reserved + * for languages list or some such) + */ + if (*valuep > ffs->strings_count) + ffs->strings_count = *valuep; + break; + + case FFS_ENDPOINT: + /* Endpoints are indexed from 1 as well. */ + if ((*valuep & USB_ENDPOINT_NUMBER_MASK) > ffs->eps_count) + ffs->eps_count = (*valuep & USB_ENDPOINT_NUMBER_MASK); + break; + } + + return 0; +} + +static int __ffs_data_got_descs(struct ffs_data *ffs, + char *const _data, size_t len) +{ + unsigned fs_count, hs_count; + int fs_len, ret = -EINVAL; + char *data = _data; + + ENTER(); + + if (unlikely(get_unaligned_le32(data) != FUNCTIONFS_DESCRIPTORS_MAGIC || + get_unaligned_le32(data + 4) != len)) + goto error; + fs_count = get_unaligned_le32(data + 8); + hs_count = get_unaligned_le32(data + 12); + + if (!fs_count && !hs_count) + goto einval; + + data += 16; + len -= 16; + + if (likely(fs_count)) { + fs_len = ffs_do_descs(fs_count, data, len, + __ffs_data_do_entity, ffs); + if (unlikely(fs_len < 0)) { + ret = fs_len; + goto error; + } + + data += fs_len; + len -= fs_len; + } else { + fs_len = 0; + } + + if (likely(hs_count)) { + ret = ffs_do_descs(hs_count, data, len, + __ffs_data_do_entity, ffs); + if (unlikely(ret < 0)) + goto error; + } else { + ret = 0; + } + + if (unlikely(len != ret)) + goto einval; + + ffs->raw_fs_descs_length = fs_len; + ffs->raw_descs_length = fs_len + ret; + ffs->raw_descs = _data; + ffs->fs_descs_count = fs_count; + ffs->hs_descs_count = hs_count; + + return 0; + +einval: + ret = -EINVAL; +error: + kfree(_data); + return ret; +} + +static int __ffs_data_got_strings(struct ffs_data *ffs, + char *const _data, size_t len) +{ + u32 str_count, needed_count, lang_count; + struct usb_gadget_strings **stringtabs, *t; + struct usb_string *strings, *s; + const char *data = _data; + + ENTER(); + + if (unlikely(get_unaligned_le32(data) != FUNCTIONFS_STRINGS_MAGIC || + get_unaligned_le32(data + 4) != len)) + goto error; + str_count = get_unaligned_le32(data + 8); + lang_count = get_unaligned_le32(data + 12); + + /* if one is zero the other must be zero */ + if (unlikely(!str_count != !lang_count)) + goto error; + + /* Do we have at least as many strings as descriptors need? */ + needed_count = ffs->strings_count; + if (unlikely(str_count < needed_count)) + goto error; + + /* + * If we don't need any strings just return and free all + * memory. + */ + if (!needed_count) { + kfree(_data); + return 0; + } + + /* Allocate everything in one chunk so there's less maintenance. */ + { + struct { + struct usb_gadget_strings *stringtabs[lang_count + 1]; + struct usb_gadget_strings stringtab[lang_count]; + struct usb_string strings[lang_count*(needed_count+1)]; + } *d; + unsigned i = 0; + + d = kmalloc(sizeof *d, GFP_KERNEL); + if (unlikely(!d)) { + kfree(_data); + return -ENOMEM; + } + + stringtabs = d->stringtabs; + t = d->stringtab; + i = lang_count; + do { + *stringtabs++ = t++; + } while (--i); + *stringtabs = NULL; + + stringtabs = d->stringtabs; + t = d->stringtab; + s = d->strings; + strings = s; + } + + /* For each language */ + data += 16; + len -= 16; + + do { /* lang_count > 0 so we can use do-while */ + unsigned needed = needed_count; + + if (unlikely(len < 3)) + goto error_free; + t->language = get_unaligned_le16(data); + t->strings = s; + ++t; + + data += 2; + len -= 2; + + /* For each string */ + do { /* str_count > 0 so we can use do-while */ + size_t length = strnlen(data, len); + + if (unlikely(length == len)) + goto error_free; + + /* + * User may provide more strings then we need, + * if that's the case we simply ignore the + * rest + */ + if (likely(needed)) { + /* + * s->id will be set while adding + * function to configuration so for + * now just leave garbage here. + */ + s->s = data; + --needed; + ++s; + } + + data += length + 1; + len -= length + 1; + } while (--str_count); + + s->id = 0; /* terminator */ + s->s = NULL; + ++s; + + } while (--lang_count); + + /* Some garbage left? */ + if (unlikely(len)) + goto error_free; + + /* Done! */ + ffs->stringtabs = stringtabs; + ffs->raw_strings = _data; + + return 0; + +error_free: + kfree(stringtabs); +error: + kfree(_data); + return -EINVAL; +} + + +/* Events handling and management *******************************************/ + +static void __ffs_event_add(struct ffs_data *ffs, + enum usb_functionfs_event_type type) +{ + enum usb_functionfs_event_type rem_type1, rem_type2 = type; + int neg = 0; + + /* + * Abort any unhandled setup + * + * We do not need to worry about some cmpxchg() changing value + * of ffs->setup_state without holding the lock because when + * state is FFS_SETUP_PENDING cmpxchg() in several places in + * the source does nothing. + */ + if (ffs->setup_state == FFS_SETUP_PENDING) + ffs->setup_state = FFS_SETUP_CANCELED; + + switch (type) { + case FUNCTIONFS_RESUME: + rem_type2 = FUNCTIONFS_SUSPEND; + /* FALL THROUGH */ + case FUNCTIONFS_SUSPEND: + case FUNCTIONFS_SETUP: + rem_type1 = type; + /* Discard all similar events */ + break; + + case FUNCTIONFS_BIND: + case FUNCTIONFS_UNBIND: + case FUNCTIONFS_DISABLE: + case FUNCTIONFS_ENABLE: + /* Discard everything other then power management. */ + rem_type1 = FUNCTIONFS_SUSPEND; + rem_type2 = FUNCTIONFS_RESUME; + neg = 1; + break; + + default: + BUG(); + } + + { + u8 *ev = ffs->ev.types, *out = ev; + unsigned n = ffs->ev.count; + for (; n; --n, ++ev) + if ((*ev == rem_type1 || *ev == rem_type2) == neg) + *out++ = *ev; + else + pr_vdebug("purging event %d\n", *ev); + ffs->ev.count = out - ffs->ev.types; + } + + pr_vdebug("adding event %d\n", type); + ffs->ev.types[ffs->ev.count++] = type; + wake_up_locked(&ffs->ev.waitq); +} + +static void ffs_event_add(struct ffs_data *ffs, + enum usb_functionfs_event_type type) +{ + unsigned long flags; + spin_lock_irqsave(&ffs->ev.waitq.lock, flags); + __ffs_event_add(ffs, type); + spin_unlock_irqrestore(&ffs->ev.waitq.lock, flags); +} + + +/* Bind/unbind USB function hooks *******************************************/ + +static int __ffs_func_bind_do_descs(enum ffs_entity_type type, u8 *valuep, + struct usb_descriptor_header *desc, + void *priv) +{ + struct usb_endpoint_descriptor *ds = (void *)desc; + struct ffs_function *func = priv; + struct ffs_ep *ffs_ep; + + /* + * If hs_descriptors is not NULL then we are reading hs + * descriptors now + */ + const int isHS = func->function.hs_descriptors != NULL; + unsigned idx; + + if (type != FFS_DESCRIPTOR) + return 0; + + if (isHS) + func->function.hs_descriptors[(long)valuep] = desc; + else + func->function.descriptors[(long)valuep] = desc; + + if (!desc || desc->bDescriptorType != USB_DT_ENDPOINT) + return 0; + + idx = (ds->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK) - 1; + ffs_ep = func->eps + idx; + + if (unlikely(ffs_ep->descs[isHS])) { + pr_vdebug("two %sspeed descriptors for EP %d\n", + isHS ? "high" : "full", + ds->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK); + return -EINVAL; + } + ffs_ep->descs[isHS] = ds; + + ffs_dump_mem(": Original ep desc", ds, ds->bLength); + if (ffs_ep->ep) { + ds->bEndpointAddress = ffs_ep->descs[0]->bEndpointAddress; + if (!ds->wMaxPacketSize) + ds->wMaxPacketSize = ffs_ep->descs[0]->wMaxPacketSize; + } else { + struct usb_request *req; + struct usb_ep *ep; + + pr_vdebug("autoconfig\n"); + ep = usb_ep_autoconfig(func->gadget, ds); + if (unlikely(!ep)) + return -ENOTSUPP; + ep->driver_data = func->eps + idx; + + req = usb_ep_alloc_request(ep, GFP_KERNEL); + if (unlikely(!req)) + return -ENOMEM; + + ffs_ep->ep = ep; + ffs_ep->req = req; + func->eps_revmap[ds->bEndpointAddress & + USB_ENDPOINT_NUMBER_MASK] = idx + 1; + } + ffs_dump_mem(": Rewritten ep desc", ds, ds->bLength); + + return 0; +} + +static int __ffs_func_bind_do_nums(enum ffs_entity_type type, u8 *valuep, + struct usb_descriptor_header *desc, + void *priv) +{ + struct ffs_function *func = priv; + unsigned idx; + u8 newValue; + + switch (type) { + default: + case FFS_DESCRIPTOR: + /* Handled in previous pass by __ffs_func_bind_do_descs() */ + return 0; + + case FFS_INTERFACE: + idx = *valuep; + if (func->interfaces_nums[idx] < 0) { + int id = usb_interface_id(func->conf, &func->function); + if (unlikely(id < 0)) + return id; + func->interfaces_nums[idx] = id; + } + newValue = func->interfaces_nums[idx]; + break; + + case FFS_STRING: + /* String' IDs are allocated when fsf_data is bound to cdev */ + newValue = func->ffs->stringtabs[0]->strings[*valuep - 1].id; + break; + + case FFS_ENDPOINT: + /* + * USB_DT_ENDPOINT are handled in + * __ffs_func_bind_do_descs(). + */ + if (desc->bDescriptorType == USB_DT_ENDPOINT) + return 0; + + idx = (*valuep & USB_ENDPOINT_NUMBER_MASK) - 1; + if (unlikely(!func->eps[idx].ep)) + return -EINVAL; + + { + struct usb_endpoint_descriptor **descs; + descs = func->eps[idx].descs; + newValue = descs[descs[0] ? 0 : 1]->bEndpointAddress; + } + break; + } + + pr_vdebug("%02x -> %02x\n", *valuep, newValue); + *valuep = newValue; + return 0; +} + +static int ffs_func_bind(struct usb_configuration *c, + struct usb_function *f) +{ + struct ffs_function *func = ffs_func_from_usb(f); + struct ffs_data *ffs = func->ffs; + + const int full = !!func->ffs->fs_descs_count; + const int high = gadget_is_dualspeed(func->gadget) && + func->ffs->hs_descs_count; + + int ret; + + /* Make it a single chunk, less management later on */ + struct { + struct ffs_ep eps[ffs->eps_count]; + struct usb_descriptor_header + *fs_descs[full ? ffs->fs_descs_count + 1 : 0]; + struct usb_descriptor_header + *hs_descs[high ? ffs->hs_descs_count + 1 : 0]; + short inums[ffs->interfaces_count]; + char raw_descs[high ? ffs->raw_descs_length + : ffs->raw_fs_descs_length]; + } *data; + + ENTER(); + + /* Only high speed but not supported by gadget? */ + if (unlikely(!(full | high))) + return -ENOTSUPP; + + /* Allocate */ + data = kmalloc(sizeof *data, GFP_KERNEL); + if (unlikely(!data)) + return -ENOMEM; + + /* Zero */ + memset(data->eps, 0, sizeof data->eps); + memcpy(data->raw_descs, ffs->raw_descs + 16, sizeof data->raw_descs); + memset(data->inums, 0xff, sizeof data->inums); + for (ret = ffs->eps_count; ret; --ret) + data->eps[ret].num = -1; + + /* Save pointers */ + func->eps = data->eps; + func->interfaces_nums = data->inums; + + /* + * Go through all the endpoint descriptors and allocate + * endpoints first, so that later we can rewrite the endpoint + * numbers without worrying that it may be described later on. + */ + if (likely(full)) { + func->function.descriptors = data->fs_descs; + ret = ffs_do_descs(ffs->fs_descs_count, + data->raw_descs, + sizeof data->raw_descs, + __ffs_func_bind_do_descs, func); + if (unlikely(ret < 0)) + goto error; + } else { + ret = 0; + } + + if (likely(high)) { + func->function.hs_descriptors = data->hs_descs; + ret = ffs_do_descs(ffs->hs_descs_count, + data->raw_descs + ret, + (sizeof data->raw_descs) - ret, + __ffs_func_bind_do_descs, func); + } + + /* + * Now handle interface numbers allocation and interface and + * endpoint numbers rewriting. We can do that in one go + * now. + */ + ret = ffs_do_descs(ffs->fs_descs_count + + (high ? ffs->hs_descs_count : 0), + data->raw_descs, sizeof data->raw_descs, + __ffs_func_bind_do_nums, func); + if (unlikely(ret < 0)) + goto error; + + /* And we're done */ + ffs_event_add(ffs, FUNCTIONFS_BIND); + return 0; + +error: + /* XXX Do we need to release all claimed endpoints here? */ + return ret; +} + + +/* Other USB function hooks *************************************************/ + +static void ffs_func_unbind(struct usb_configuration *c, + struct usb_function *f) +{ + struct ffs_function *func = ffs_func_from_usb(f); + struct ffs_data *ffs = func->ffs; + + ENTER(); + + if (ffs->func == func) { + ffs_func_eps_disable(func); + ffs->func = NULL; + } + + ffs_event_add(ffs, FUNCTIONFS_UNBIND); + + ffs_func_free(func); +} + +static int ffs_func_set_alt(struct usb_function *f, + unsigned interface, unsigned alt) +{ + struct ffs_function *func = ffs_func_from_usb(f); + struct ffs_data *ffs = func->ffs; + int ret = 0, intf; + + if (alt != (unsigned)-1) { + intf = ffs_func_revmap_intf(func, interface); + if (unlikely(intf < 0)) + return intf; + } + + if (ffs->func) + ffs_func_eps_disable(ffs->func); + + if (ffs->state != FFS_ACTIVE) + return -ENODEV; + + if (alt == (unsigned)-1) { + ffs->func = NULL; + ffs_event_add(ffs, FUNCTIONFS_DISABLE); + return 0; + } + + ffs->func = func; + ret = ffs_func_eps_enable(func); + if (likely(ret >= 0)) + ffs_event_add(ffs, FUNCTIONFS_ENABLE); + return ret; +} + +static void ffs_func_disable(struct usb_function *f) +{ + ffs_func_set_alt(f, 0, (unsigned)-1); +} + +static int ffs_func_setup(struct usb_function *f, + const struct usb_ctrlrequest *creq) +{ + struct ffs_function *func = ffs_func_from_usb(f); + struct ffs_data *ffs = func->ffs; + unsigned long flags; + int ret; + + ENTER(); + + pr_vdebug("creq->bRequestType = %02x\n", creq->bRequestType); + pr_vdebug("creq->bRequest = %02x\n", creq->bRequest); + pr_vdebug("creq->wValue = %04x\n", le16_to_cpu(creq->wValue)); + pr_vdebug("creq->wIndex = %04x\n", le16_to_cpu(creq->wIndex)); + pr_vdebug("creq->wLength = %04x\n", le16_to_cpu(creq->wLength)); + + /* + * Most requests directed to interface go through here + * (notable exceptions are set/get interface) so we need to + * handle them. All other either handled by composite or + * passed to usb_configuration->setup() (if one is set). No + * matter, we will handle requests directed to endpoint here + * as well (as it's straightforward) but what to do with any + * other request? + */ + if (ffs->state != FFS_ACTIVE) + return -ENODEV; + + switch (creq->bRequestType & USB_RECIP_MASK) { + case USB_RECIP_INTERFACE: + ret = ffs_func_revmap_intf(func, le16_to_cpu(creq->wIndex)); + if (unlikely(ret < 0)) + return ret; + break; + + case USB_RECIP_ENDPOINT: + ret = ffs_func_revmap_ep(func, le16_to_cpu(creq->wIndex)); + if (unlikely(ret < 0)) + return ret; + break; + + default: + return -EOPNOTSUPP; + } + + spin_lock_irqsave(&ffs->ev.waitq.lock, flags); + ffs->ev.setup = *creq; + ffs->ev.setup.wIndex = cpu_to_le16(ret); + __ffs_event_add(ffs, FUNCTIONFS_SETUP); + spin_unlock_irqrestore(&ffs->ev.waitq.lock, flags); + + return 0; +} + +static void ffs_func_suspend(struct usb_function *f) +{ + ENTER(); + ffs_event_add(ffs_func_from_usb(f)->ffs, FUNCTIONFS_SUSPEND); +} + +static void ffs_func_resume(struct usb_function *f) +{ + ENTER(); + ffs_event_add(ffs_func_from_usb(f)->ffs, FUNCTIONFS_RESUME); +} + + +/* Endpoint and interface numbers reverse mapping ***************************/ + +static int ffs_func_revmap_ep(struct ffs_function *func, u8 num) +{ + num = func->eps_revmap[num & USB_ENDPOINT_NUMBER_MASK]; + return num ? num : -EDOM; +} + +static int ffs_func_revmap_intf(struct ffs_function *func, u8 intf) +{ + short *nums = func->interfaces_nums; + unsigned count = func->ffs->interfaces_count; + + for (; count; --count, ++nums) { + if (*nums >= 0 && *nums == intf) + return nums - func->interfaces_nums; + } + + return -EDOM; +} + + +/* Misc helper functions ****************************************************/ + +static int ffs_mutex_lock(struct mutex *mutex, unsigned nonblock) +{ + return nonblock + ? likely(mutex_trylock(mutex)) ? 0 : -EAGAIN + : mutex_lock_interruptible(mutex); +} + +static char *ffs_prepare_buffer(const char * __user buf, size_t len) +{ + char *data; + + if (unlikely(!len)) + return NULL; + + data = kmalloc(len, GFP_KERNEL); + if (unlikely(!data)) + return ERR_PTR(-ENOMEM); + + if (unlikely(__copy_from_user(data, buf, len))) { + kfree(data); + return ERR_PTR(-EFAULT); + } + + pr_vdebug("Buffer from user space:\n"); + ffs_dump_mem("", data, len); + + return data; +} diff --git a/drivers/staging/ccg/f_mass_storage.c b/drivers/staging/ccg/f_mass_storage.c new file mode 100644 index 000000000000..4f1142efa6d1 --- /dev/null +++ b/drivers/staging/ccg/f_mass_storage.c @@ -0,0 +1,3135 @@ +/* + * f_mass_storage.c -- Mass Storage USB Composite Function + * + * Copyright (C) 2003-2008 Alan Stern + * Copyright (C) 2009 Samsung Electronics + * Author: Michal Nazarewicz <mina86@mina86.com> + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The names of the above-listed copyright holders may not be used + * to endorse or promote products derived from this software without + * specific prior written permission. + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS + * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, + * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/* + * The Mass Storage Function acts as a USB Mass Storage device, + * appearing to the host as a disk drive or as a CD-ROM drive. In + * addition to providing an example of a genuinely useful composite + * function for a USB device, it also illustrates a technique of + * double-buffering for increased throughput. + * + * For more information about MSF and in particular its module + * parameters and sysfs interface read the + * <Documentation/usb/mass-storage.txt> file. + */ + +/* + * MSF is configured by specifying a fsg_config structure. It has the + * following fields: + * + * nluns Number of LUNs function have (anywhere from 1 + * to FSG_MAX_LUNS which is 8). + * luns An array of LUN configuration values. This + * should be filled for each LUN that + * function will include (ie. for "nluns" + * LUNs). Each element of the array has + * the following fields: + * ->filename The path to the backing file for the LUN. + * Required if LUN is not marked as + * removable. + * ->ro Flag specifying access to the LUN shall be + * read-only. This is implied if CD-ROM + * emulation is enabled as well as when + * it was impossible to open "filename" + * in R/W mode. + * ->removable Flag specifying that LUN shall be indicated as + * being removable. + * ->cdrom Flag specifying that LUN shall be reported as + * being a CD-ROM. + * ->nofua Flag specifying that FUA flag in SCSI WRITE(10,12) + * commands for this LUN shall be ignored. + * + * vendor_name + * product_name + * release Information used as a reply to INQUIRY + * request. To use default set to NULL, + * NULL, 0xffff respectively. The first + * field should be 8 and the second 16 + * characters or less. + * + * can_stall Set to permit function to halt bulk endpoints. + * Disabled on some USB devices known not + * to work correctly. You should set it + * to true. + * + * If "removable" is not set for a LUN then a backing file must be + * specified. If it is set, then NULL filename means the LUN's medium + * is not loaded (an empty string as "filename" in the fsg_config + * structure causes error). The CD-ROM emulation includes a single + * data track and no audio tracks; hence there need be only one + * backing file per LUN. + * + * This function is heavily based on "File-backed Storage Gadget" by + * Alan Stern which in turn is heavily based on "Gadget Zero" by David + * Brownell. The driver's SCSI command interface was based on the + * "Information technology - Small Computer System Interface - 2" + * document from X3T9.2 Project 375D, Revision 10L, 7-SEP-93, + * available at <http://www.t10.org/ftp/t10/drafts/s2/s2-r10l.pdf>. + * The single exception is opcode 0x23 (READ FORMAT CAPACITIES), which + * was based on the "Universal Serial Bus Mass Storage Class UFI + * Command Specification" document, Revision 1.0, December 14, 1998, + * available at + * <http://www.usb.org/developers/devclass_docs/usbmass-ufi10.pdf>. + */ + +/* + * Driver Design + * + * The MSF is fairly straightforward. There is a main kernel + * thread that handles most of the work. Interrupt routines field + * callbacks from the controller driver: bulk- and interrupt-request + * completion notifications, endpoint-0 events, and disconnect events. + * Completion events are passed to the main thread by wakeup calls. Many + * ep0 requests are handled at interrupt time, but SetInterface, + * SetConfiguration, and device reset requests are forwarded to the + * thread in the form of "exceptions" using SIGUSR1 signals (since they + * should interrupt any ongoing file I/O operations). + * + * The thread's main routine implements the standard command/data/status + * parts of a SCSI interaction. It and its subroutines are full of tests + * for pending signals/exceptions -- all this polling is necessary since + * the kernel has no setjmp/longjmp equivalents. (Maybe this is an + * indication that the driver really wants to be running in userspace.) + * An important point is that so long as the thread is alive it keeps an + * open reference to the backing file. This will prevent unmounting + * the backing file's underlying filesystem and could cause problems + * during system shutdown, for example. To prevent such problems, the + * thread catches INT, TERM, and KILL signals and converts them into + * an EXIT exception. + * + * In normal operation the main thread is started during the gadget's + * fsg_bind() callback and stopped during fsg_unbind(). But it can + * also exit when it receives a signal, and there's no point leaving + * the gadget running when the thread is dead. As of this moment, MSF + * provides no way to deregister the gadget when thread dies -- maybe + * a callback functions is needed. + * + * To provide maximum throughput, the driver uses a circular pipeline of + * buffer heads (struct fsg_buffhd). In principle the pipeline can be + * arbitrarily long; in practice the benefits don't justify having more + * than 2 stages (i.e., double buffering). But it helps to think of the + * pipeline as being a long one. Each buffer head contains a bulk-in and + * a bulk-out request pointer (since the buffer can be used for both + * output and input -- directions always are given from the host's + * point of view) as well as a pointer to the buffer and various state + * variables. + * + * Use of the pipeline follows a simple protocol. There is a variable + * (fsg->next_buffhd_to_fill) that points to the next buffer head to use. + * At any time that buffer head may still be in use from an earlier + * request, so each buffer head has a state variable indicating whether + * it is EMPTY, FULL, or BUSY. Typical use involves waiting for the + * buffer head to be EMPTY, filling the buffer either by file I/O or by + * USB I/O (during which the buffer head is BUSY), and marking the buffer + * head FULL when the I/O is complete. Then the buffer will be emptied + * (again possibly by USB I/O, during which it is marked BUSY) and + * finally marked EMPTY again (possibly by a completion routine). + * + * A module parameter tells the driver to avoid stalling the bulk + * endpoints wherever the transport specification allows. This is + * necessary for some UDCs like the SuperH, which cannot reliably clear a + * halt on a bulk endpoint. However, under certain circumstances the + * Bulk-only specification requires a stall. In such cases the driver + * will halt the endpoint and set a flag indicating that it should clear + * the halt in software during the next device reset. Hopefully this + * will permit everything to work correctly. Furthermore, although the + * specification allows the bulk-out endpoint to halt when the host sends + * too much data, implementing this would cause an unavoidable race. + * The driver will always use the "no-stall" approach for OUT transfers. + * + * One subtle point concerns sending status-stage responses for ep0 + * requests. Some of these requests, such as device reset, can involve + * interrupting an ongoing file I/O operation, which might take an + * arbitrarily long time. During that delay the host might give up on + * the original ep0 request and issue a new one. When that happens the + * driver should not notify the host about completion of the original + * request, as the host will no longer be waiting for it. So the driver + * assigns to each ep0 request a unique tag, and it keeps track of the + * tag value of the request associated with a long-running exception + * (device-reset, interface-change, or configuration-change). When the + * exception handler is finished, the status-stage response is submitted + * only if the current ep0 request tag is equal to the exception request + * tag. Thus only the most recently received ep0 request will get a + * status-stage response. + * + * Warning: This driver source file is too long. It ought to be split up + * into a header file plus about 3 separate .c files, to handle the details + * of the Gadget, USB Mass Storage, and SCSI protocols. + */ + + +/* #define VERBOSE_DEBUG */ +/* #define DUMP_MSGS */ + +#include <linux/blkdev.h> +#include <linux/completion.h> +#include <linux/dcache.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/fcntl.h> +#include <linux/file.h> +#include <linux/fs.h> +#include <linux/kref.h> +#include <linux/kthread.h> +#include <linux/limits.h> +#include <linux/rwsem.h> +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <linux/string.h> +#include <linux/freezer.h> +#include <linux/utsname.h> + +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> +#include <linux/usb/composite.h> + +#include "gadget_chips.h" + + +/*------------------------------------------------------------------------*/ + +#define FSG_DRIVER_DESC "Mass Storage Function" +#define FSG_DRIVER_VERSION "2009/09/11" + +static const char fsg_string_interface[] = "Mass Storage"; + +#define FSG_NO_DEVICE_STRINGS 1 +#define FSG_NO_OTG 1 +#define FSG_NO_INTR_EP 1 + +#include "storage_common.c" + + +/*-------------------------------------------------------------------------*/ + +struct fsg_dev; +struct fsg_common; + +/* FSF callback functions */ +struct fsg_operations { + /* + * Callback function to call when thread exits. If no + * callback is set or it returns value lower then zero MSF + * will force eject all LUNs it operates on (including those + * marked as non-removable or with prevent_medium_removal flag + * set). + */ + int (*thread_exits)(struct fsg_common *common); + + /* + * Called prior to ejection. Negative return means error, + * zero means to continue with ejection, positive means not to + * eject. + */ + int (*pre_eject)(struct fsg_common *common, + struct fsg_lun *lun, int num); + /* + * Called after ejection. Negative return means error, zero + * or positive is just a success. + */ + int (*post_eject)(struct fsg_common *common, + struct fsg_lun *lun, int num); +}; + +/* Data shared by all the FSG instances. */ +struct fsg_common { + struct usb_gadget *gadget; + struct usb_composite_dev *cdev; + struct fsg_dev *fsg, *new_fsg; + wait_queue_head_t fsg_wait; + + /* filesem protects: backing files in use */ + struct rw_semaphore filesem; + + /* lock protects: state, all the req_busy's */ + spinlock_t lock; + + struct usb_ep *ep0; /* Copy of gadget->ep0 */ + struct usb_request *ep0req; /* Copy of cdev->req */ + unsigned int ep0_req_tag; + + struct fsg_buffhd *next_buffhd_to_fill; + struct fsg_buffhd *next_buffhd_to_drain; + struct fsg_buffhd *buffhds; + + int cmnd_size; + u8 cmnd[MAX_COMMAND_SIZE]; + + unsigned int nluns; + unsigned int lun; + struct fsg_lun *luns; + struct fsg_lun *curlun; + + unsigned int bulk_out_maxpacket; + enum fsg_state state; /* For exception handling */ + unsigned int exception_req_tag; + + enum data_direction data_dir; + u32 data_size; + u32 data_size_from_cmnd; + u32 tag; + u32 residue; + u32 usb_amount_left; + + unsigned int can_stall:1; + unsigned int free_storage_on_release:1; + unsigned int phase_error:1; + unsigned int short_packet_received:1; + unsigned int bad_lun_okay:1; + unsigned int running:1; + + int thread_wakeup_needed; + struct completion thread_notifier; + struct task_struct *thread_task; + + /* Callback functions. */ + const struct fsg_operations *ops; + /* Gadget's private data. */ + void *private_data; + + /* + * Vendor (8 chars), product (16 chars), release (4 + * hexadecimal digits) and NUL byte + */ + char inquiry_string[8 + 16 + 4 + 1]; + + struct kref ref; +}; + +struct fsg_config { + unsigned nluns; + struct fsg_lun_config { + const char *filename; + char ro; + char removable; + char cdrom; + char nofua; + } luns[FSG_MAX_LUNS]; + + /* Callback functions. */ + const struct fsg_operations *ops; + /* Gadget's private data. */ + void *private_data; + + const char *vendor_name; /* 8 characters or less */ + const char *product_name; /* 16 characters or less */ + u16 release; + + char can_stall; +}; + +struct fsg_dev { + struct usb_function function; + struct usb_gadget *gadget; /* Copy of cdev->gadget */ + struct fsg_common *common; + + u16 interface_number; + + unsigned int bulk_in_enabled:1; + unsigned int bulk_out_enabled:1; + + unsigned long atomic_bitflags; +#define IGNORE_BULK_OUT 0 + + struct usb_ep *bulk_in; + struct usb_ep *bulk_out; +}; + +static inline int __fsg_is_set(struct fsg_common *common, + const char *func, unsigned line) +{ + if (common->fsg) + return 1; + ERROR(common, "common->fsg is NULL in %s at %u\n", func, line); + WARN_ON(1); + return 0; +} + +#define fsg_is_set(common) likely(__fsg_is_set(common, __func__, __LINE__)) + +static inline struct fsg_dev *fsg_from_func(struct usb_function *f) +{ + return container_of(f, struct fsg_dev, function); +} + +typedef void (*fsg_routine_t)(struct fsg_dev *); + +static int exception_in_progress(struct fsg_common *common) +{ + return common->state > FSG_STATE_IDLE; +} + +/* Make bulk-out requests be divisible by the maxpacket size */ +static void set_bulk_out_req_length(struct fsg_common *common, + struct fsg_buffhd *bh, unsigned int length) +{ + unsigned int rem; + + bh->bulk_out_intended_length = length; + rem = length % common->bulk_out_maxpacket; + if (rem > 0) + length += common->bulk_out_maxpacket - rem; + bh->outreq->length = length; +} + + +/*-------------------------------------------------------------------------*/ + +static int fsg_set_halt(struct fsg_dev *fsg, struct usb_ep *ep) +{ + const char *name; + + if (ep == fsg->bulk_in) + name = "bulk-in"; + else if (ep == fsg->bulk_out) + name = "bulk-out"; + else + name = ep->name; + DBG(fsg, "%s set halt\n", name); + return usb_ep_set_halt(ep); +} + + +/*-------------------------------------------------------------------------*/ + +/* These routines may be called in process context or in_irq */ + +/* Caller must hold fsg->lock */ +static void wakeup_thread(struct fsg_common *common) +{ + /* Tell the main thread that something has happened */ + common->thread_wakeup_needed = 1; + if (common->thread_task) + wake_up_process(common->thread_task); +} + +static void raise_exception(struct fsg_common *common, enum fsg_state new_state) +{ + unsigned long flags; + + /* + * Do nothing if a higher-priority exception is already in progress. + * If a lower-or-equal priority exception is in progress, preempt it + * and notify the main thread by sending it a signal. + */ + spin_lock_irqsave(&common->lock, flags); + if (common->state <= new_state) { + common->exception_req_tag = common->ep0_req_tag; + common->state = new_state; + if (common->thread_task) + send_sig_info(SIGUSR1, SEND_SIG_FORCED, + common->thread_task); + } + spin_unlock_irqrestore(&common->lock, flags); +} + + +/*-------------------------------------------------------------------------*/ + +static int ep0_queue(struct fsg_common *common) +{ + int rc; + + rc = usb_ep_queue(common->ep0, common->ep0req, GFP_ATOMIC); + common->ep0->driver_data = common; + if (rc != 0 && rc != -ESHUTDOWN) { + /* We can't do much more than wait for a reset */ + WARNING(common, "error in submission: %s --> %d\n", + common->ep0->name, rc); + } + return rc; +} + + +/*-------------------------------------------------------------------------*/ + +/* Completion handlers. These always run in_irq. */ + +static void bulk_in_complete(struct usb_ep *ep, struct usb_request *req) +{ + struct fsg_common *common = ep->driver_data; + struct fsg_buffhd *bh = req->context; + + if (req->status || req->actual != req->length) + DBG(common, "%s --> %d, %u/%u\n", __func__, + req->status, req->actual, req->length); + if (req->status == -ECONNRESET) /* Request was cancelled */ + usb_ep_fifo_flush(ep); + + /* Hold the lock while we update the request and buffer states */ + smp_wmb(); + spin_lock(&common->lock); + bh->inreq_busy = 0; + bh->state = BUF_STATE_EMPTY; + wakeup_thread(common); + spin_unlock(&common->lock); +} + +static void bulk_out_complete(struct usb_ep *ep, struct usb_request *req) +{ + struct fsg_common *common = ep->driver_data; + struct fsg_buffhd *bh = req->context; + + dump_msg(common, "bulk-out", req->buf, req->actual); + if (req->status || req->actual != bh->bulk_out_intended_length) + DBG(common, "%s --> %d, %u/%u\n", __func__, + req->status, req->actual, bh->bulk_out_intended_length); + if (req->status == -ECONNRESET) /* Request was cancelled */ + usb_ep_fifo_flush(ep); + + /* Hold the lock while we update the request and buffer states */ + smp_wmb(); + spin_lock(&common->lock); + bh->outreq_busy = 0; + bh->state = BUF_STATE_FULL; + wakeup_thread(common); + spin_unlock(&common->lock); +} + +static int fsg_setup(struct usb_function *f, + const struct usb_ctrlrequest *ctrl) +{ + struct fsg_dev *fsg = fsg_from_func(f); + struct usb_request *req = fsg->common->ep0req; + u16 w_index = le16_to_cpu(ctrl->wIndex); + u16 w_value = le16_to_cpu(ctrl->wValue); + u16 w_length = le16_to_cpu(ctrl->wLength); + + if (!fsg_is_set(fsg->common)) + return -EOPNOTSUPP; + + ++fsg->common->ep0_req_tag; /* Record arrival of a new request */ + req->context = NULL; + req->length = 0; + dump_msg(fsg, "ep0-setup", (u8 *) ctrl, sizeof(*ctrl)); + + switch (ctrl->bRequest) { + + case US_BULK_RESET_REQUEST: + if (ctrl->bRequestType != + (USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE)) + break; + if (w_index != fsg->interface_number || w_value != 0 || + w_length != 0) + return -EDOM; + + /* + * Raise an exception to stop the current operation + * and reinitialize our state. + */ + DBG(fsg, "bulk reset request\n"); + raise_exception(fsg->common, FSG_STATE_RESET); + return DELAYED_STATUS; + + case US_BULK_GET_MAX_LUN: + if (ctrl->bRequestType != + (USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE)) + break; + if (w_index != fsg->interface_number || w_value != 0 || + w_length != 1) + return -EDOM; + VDBG(fsg, "get max LUN\n"); + *(u8 *)req->buf = fsg->common->nluns - 1; + + /* Respond with data/status */ + req->length = min((u16)1, w_length); + return ep0_queue(fsg->common); + } + + VDBG(fsg, + "unknown class-specific control req %02x.%02x v%04x i%04x l%u\n", + ctrl->bRequestType, ctrl->bRequest, + le16_to_cpu(ctrl->wValue), w_index, w_length); + return -EOPNOTSUPP; +} + + +/*-------------------------------------------------------------------------*/ + +/* All the following routines run in process context */ + +/* Use this for bulk or interrupt transfers, not ep0 */ +static void start_transfer(struct fsg_dev *fsg, struct usb_ep *ep, + struct usb_request *req, int *pbusy, + enum fsg_buffer_state *state) +{ + int rc; + + if (ep == fsg->bulk_in) + dump_msg(fsg, "bulk-in", req->buf, req->length); + + spin_lock_irq(&fsg->common->lock); + *pbusy = 1; + *state = BUF_STATE_BUSY; + spin_unlock_irq(&fsg->common->lock); + rc = usb_ep_queue(ep, req, GFP_KERNEL); + if (rc != 0) { + *pbusy = 0; + *state = BUF_STATE_EMPTY; + + /* We can't do much more than wait for a reset */ + + /* + * Note: currently the net2280 driver fails zero-length + * submissions if DMA is enabled. + */ + if (rc != -ESHUTDOWN && + !(rc == -EOPNOTSUPP && req->length == 0)) + WARNING(fsg, "error in submission: %s --> %d\n", + ep->name, rc); + } +} + +static bool start_in_transfer(struct fsg_common *common, struct fsg_buffhd *bh) +{ + if (!fsg_is_set(common)) + return false; + start_transfer(common->fsg, common->fsg->bulk_in, + bh->inreq, &bh->inreq_busy, &bh->state); + return true; +} + +static bool start_out_transfer(struct fsg_common *common, struct fsg_buffhd *bh) +{ + if (!fsg_is_set(common)) + return false; + start_transfer(common->fsg, common->fsg->bulk_out, + bh->outreq, &bh->outreq_busy, &bh->state); + return true; +} + +static int sleep_thread(struct fsg_common *common) +{ + int rc = 0; + + /* Wait until a signal arrives or we are woken up */ + for (;;) { + try_to_freeze(); + set_current_state(TASK_INTERRUPTIBLE); + if (signal_pending(current)) { + rc = -EINTR; + break; + } + if (common->thread_wakeup_needed) + break; + schedule(); + } + __set_current_state(TASK_RUNNING); + common->thread_wakeup_needed = 0; + return rc; +} + + +/*-------------------------------------------------------------------------*/ + +static int do_read(struct fsg_common *common) +{ + struct fsg_lun *curlun = common->curlun; + u32 lba; + struct fsg_buffhd *bh; + int rc; + u32 amount_left; + loff_t file_offset, file_offset_tmp; + unsigned int amount; + ssize_t nread; + + /* + * Get the starting Logical Block Address and check that it's + * not too big. + */ + if (common->cmnd[0] == READ_6) + lba = get_unaligned_be24(&common->cmnd[1]); + else { + lba = get_unaligned_be32(&common->cmnd[2]); + + /* + * We allow DPO (Disable Page Out = don't save data in the + * cache) and FUA (Force Unit Access = don't read from the + * cache), but we don't implement them. + */ + if ((common->cmnd[1] & ~0x18) != 0) { + curlun->sense_data = SS_INVALID_FIELD_IN_CDB; + return -EINVAL; + } + } + if (lba >= curlun->num_sectors) { + curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; + return -EINVAL; + } + file_offset = ((loff_t) lba) << curlun->blkbits; + + /* Carry out the file reads */ + amount_left = common->data_size_from_cmnd; + if (unlikely(amount_left == 0)) + return -EIO; /* No default reply */ + + for (;;) { + /* + * Figure out how much we need to read: + * Try to read the remaining amount. + * But don't read more than the buffer size. + * And don't try to read past the end of the file. + */ + amount = min(amount_left, FSG_BUFLEN); + amount = min((loff_t)amount, + curlun->file_length - file_offset); + + /* Wait for the next buffer to become available */ + bh = common->next_buffhd_to_fill; + while (bh->state != BUF_STATE_EMPTY) { + rc = sleep_thread(common); + if (rc) + return rc; + } + + /* + * If we were asked to read past the end of file, + * end with an empty buffer. + */ + if (amount == 0) { + curlun->sense_data = + SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; + curlun->sense_data_info = + file_offset >> curlun->blkbits; + curlun->info_valid = 1; + bh->inreq->length = 0; + bh->state = BUF_STATE_FULL; + break; + } + + /* Perform the read */ + file_offset_tmp = file_offset; + nread = vfs_read(curlun->filp, + (char __user *)bh->buf, + amount, &file_offset_tmp); + VLDBG(curlun, "file read %u @ %llu -> %d\n", amount, + (unsigned long long)file_offset, (int)nread); + if (signal_pending(current)) + return -EINTR; + + if (nread < 0) { + LDBG(curlun, "error in file read: %d\n", (int)nread); + nread = 0; + } else if (nread < amount) { + LDBG(curlun, "partial file read: %d/%u\n", + (int)nread, amount); + nread = round_down(nread, curlun->blksize); + } + file_offset += nread; + amount_left -= nread; + common->residue -= nread; + + /* + * Except at the end of the transfer, nread will be + * equal to the buffer size, which is divisible by the + * bulk-in maxpacket size. + */ + bh->inreq->length = nread; + bh->state = BUF_STATE_FULL; + + /* If an error occurred, report it and its position */ + if (nread < amount) { + curlun->sense_data = SS_UNRECOVERED_READ_ERROR; + curlun->sense_data_info = + file_offset >> curlun->blkbits; + curlun->info_valid = 1; + break; + } + + if (amount_left == 0) + break; /* No more left to read */ + + /* Send this buffer and go read some more */ + bh->inreq->zero = 0; + if (!start_in_transfer(common, bh)) + /* Don't know what to do if common->fsg is NULL */ + return -EIO; + common->next_buffhd_to_fill = bh->next; + } + + return -EIO; /* No default reply */ +} + + +/*-------------------------------------------------------------------------*/ + +static int do_write(struct fsg_common *common) +{ + struct fsg_lun *curlun = common->curlun; + u32 lba; + struct fsg_buffhd *bh; + int get_some_more; + u32 amount_left_to_req, amount_left_to_write; + loff_t usb_offset, file_offset, file_offset_tmp; + unsigned int amount; + ssize_t nwritten; + int rc; + + if (curlun->ro) { + curlun->sense_data = SS_WRITE_PROTECTED; + return -EINVAL; + } + spin_lock(&curlun->filp->f_lock); + curlun->filp->f_flags &= ~O_SYNC; /* Default is not to wait */ + spin_unlock(&curlun->filp->f_lock); + + /* + * Get the starting Logical Block Address and check that it's + * not too big + */ + if (common->cmnd[0] == WRITE_6) + lba = get_unaligned_be24(&common->cmnd[1]); + else { + lba = get_unaligned_be32(&common->cmnd[2]); + + /* + * We allow DPO (Disable Page Out = don't save data in the + * cache) and FUA (Force Unit Access = write directly to the + * medium). We don't implement DPO; we implement FUA by + * performing synchronous output. + */ + if (common->cmnd[1] & ~0x18) { + curlun->sense_data = SS_INVALID_FIELD_IN_CDB; + return -EINVAL; + } + if (!curlun->nofua && (common->cmnd[1] & 0x08)) { /* FUA */ + spin_lock(&curlun->filp->f_lock); + curlun->filp->f_flags |= O_SYNC; + spin_unlock(&curlun->filp->f_lock); + } + } + if (lba >= curlun->num_sectors) { + curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; + return -EINVAL; + } + + /* Carry out the file writes */ + get_some_more = 1; + file_offset = usb_offset = ((loff_t) lba) << curlun->blkbits; + amount_left_to_req = common->data_size_from_cmnd; + amount_left_to_write = common->data_size_from_cmnd; + + while (amount_left_to_write > 0) { + + /* Queue a request for more data from the host */ + bh = common->next_buffhd_to_fill; + if (bh->state == BUF_STATE_EMPTY && get_some_more) { + + /* + * Figure out how much we want to get: + * Try to get the remaining amount, + * but not more than the buffer size. + */ + amount = min(amount_left_to_req, FSG_BUFLEN); + + /* Beyond the end of the backing file? */ + if (usb_offset >= curlun->file_length) { + get_some_more = 0; + curlun->sense_data = + SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; + curlun->sense_data_info = + usb_offset >> curlun->blkbits; + curlun->info_valid = 1; + continue; + } + + /* Get the next buffer */ + usb_offset += amount; + common->usb_amount_left -= amount; + amount_left_to_req -= amount; + if (amount_left_to_req == 0) + get_some_more = 0; + + /* + * Except at the end of the transfer, amount will be + * equal to the buffer size, which is divisible by + * the bulk-out maxpacket size. + */ + set_bulk_out_req_length(common, bh, amount); + if (!start_out_transfer(common, bh)) + /* Dunno what to do if common->fsg is NULL */ + return -EIO; + common->next_buffhd_to_fill = bh->next; + continue; + } + + /* Write the received data to the backing file */ + bh = common->next_buffhd_to_drain; + if (bh->state == BUF_STATE_EMPTY && !get_some_more) + break; /* We stopped early */ + if (bh->state == BUF_STATE_FULL) { + smp_rmb(); + common->next_buffhd_to_drain = bh->next; + bh->state = BUF_STATE_EMPTY; + + /* Did something go wrong with the transfer? */ + if (bh->outreq->status != 0) { + curlun->sense_data = SS_COMMUNICATION_FAILURE; + curlun->sense_data_info = + file_offset >> curlun->blkbits; + curlun->info_valid = 1; + break; + } + + amount = bh->outreq->actual; + if (curlun->file_length - file_offset < amount) { + LERROR(curlun, + "write %u @ %llu beyond end %llu\n", + amount, (unsigned long long)file_offset, + (unsigned long long)curlun->file_length); + amount = curlun->file_length - file_offset; + } + + /* Don't accept excess data. The spec doesn't say + * what to do in this case. We'll ignore the error. + */ + amount = min(amount, bh->bulk_out_intended_length); + + /* Don't write a partial block */ + amount = round_down(amount, curlun->blksize); + if (amount == 0) + goto empty_write; + + /* Perform the write */ + file_offset_tmp = file_offset; + nwritten = vfs_write(curlun->filp, + (char __user *)bh->buf, + amount, &file_offset_tmp); + VLDBG(curlun, "file write %u @ %llu -> %d\n", amount, + (unsigned long long)file_offset, (int)nwritten); + if (signal_pending(current)) + return -EINTR; /* Interrupted! */ + + if (nwritten < 0) { + LDBG(curlun, "error in file write: %d\n", + (int)nwritten); + nwritten = 0; + } else if (nwritten < amount) { + LDBG(curlun, "partial file write: %d/%u\n", + (int)nwritten, amount); + nwritten = round_down(nwritten, curlun->blksize); + } + file_offset += nwritten; + amount_left_to_write -= nwritten; + common->residue -= nwritten; + + /* If an error occurred, report it and its position */ + if (nwritten < amount) { + curlun->sense_data = SS_WRITE_ERROR; + curlun->sense_data_info = + file_offset >> curlun->blkbits; + curlun->info_valid = 1; + break; + } + + empty_write: + /* Did the host decide to stop early? */ + if (bh->outreq->actual < bh->bulk_out_intended_length) { + common->short_packet_received = 1; + break; + } + continue; + } + + /* Wait for something to happen */ + rc = sleep_thread(common); + if (rc) + return rc; + } + + return -EIO; /* No default reply */ +} + + +/*-------------------------------------------------------------------------*/ + +static int do_synchronize_cache(struct fsg_common *common) +{ + struct fsg_lun *curlun = common->curlun; + int rc; + + /* We ignore the requested LBA and write out all file's + * dirty data buffers. */ + rc = fsg_lun_fsync_sub(curlun); + if (rc) + curlun->sense_data = SS_WRITE_ERROR; + return 0; +} + + +/*-------------------------------------------------------------------------*/ + +static void invalidate_sub(struct fsg_lun *curlun) +{ + struct file *filp = curlun->filp; + struct inode *inode = filp->f_path.dentry->d_inode; + unsigned long rc; + + rc = invalidate_mapping_pages(inode->i_mapping, 0, -1); + VLDBG(curlun, "invalidate_mapping_pages -> %ld\n", rc); +} + +static int do_verify(struct fsg_common *common) +{ + struct fsg_lun *curlun = common->curlun; + u32 lba; + u32 verification_length; + struct fsg_buffhd *bh = common->next_buffhd_to_fill; + loff_t file_offset, file_offset_tmp; + u32 amount_left; + unsigned int amount; + ssize_t nread; + + /* + * Get the starting Logical Block Address and check that it's + * not too big. + */ + lba = get_unaligned_be32(&common->cmnd[2]); + if (lba >= curlun->num_sectors) { + curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; + return -EINVAL; + } + + /* + * We allow DPO (Disable Page Out = don't save data in the + * cache) but we don't implement it. + */ + if (common->cmnd[1] & ~0x10) { + curlun->sense_data = SS_INVALID_FIELD_IN_CDB; + return -EINVAL; + } + + verification_length = get_unaligned_be16(&common->cmnd[7]); + if (unlikely(verification_length == 0)) + return -EIO; /* No default reply */ + + /* Prepare to carry out the file verify */ + amount_left = verification_length << curlun->blkbits; + file_offset = ((loff_t) lba) << curlun->blkbits; + + /* Write out all the dirty buffers before invalidating them */ + fsg_lun_fsync_sub(curlun); + if (signal_pending(current)) + return -EINTR; + + invalidate_sub(curlun); + if (signal_pending(current)) + return -EINTR; + + /* Just try to read the requested blocks */ + while (amount_left > 0) { + /* + * Figure out how much we need to read: + * Try to read the remaining amount, but not more than + * the buffer size. + * And don't try to read past the end of the file. + */ + amount = min(amount_left, FSG_BUFLEN); + amount = min((loff_t)amount, + curlun->file_length - file_offset); + if (amount == 0) { + curlun->sense_data = + SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; + curlun->sense_data_info = + file_offset >> curlun->blkbits; + curlun->info_valid = 1; + break; + } + + /* Perform the read */ + file_offset_tmp = file_offset; + nread = vfs_read(curlun->filp, + (char __user *) bh->buf, + amount, &file_offset_tmp); + VLDBG(curlun, "file read %u @ %llu -> %d\n", amount, + (unsigned long long) file_offset, + (int) nread); + if (signal_pending(current)) + return -EINTR; + + if (nread < 0) { + LDBG(curlun, "error in file verify: %d\n", (int)nread); + nread = 0; + } else if (nread < amount) { + LDBG(curlun, "partial file verify: %d/%u\n", + (int)nread, amount); + nread = round_down(nread, curlun->blksize); + } + if (nread == 0) { + curlun->sense_data = SS_UNRECOVERED_READ_ERROR; + curlun->sense_data_info = + file_offset >> curlun->blkbits; + curlun->info_valid = 1; + break; + } + file_offset += nread; + amount_left -= nread; + } + return 0; +} + + +/*-------------------------------------------------------------------------*/ + +static int do_inquiry(struct fsg_common *common, struct fsg_buffhd *bh) +{ + struct fsg_lun *curlun = common->curlun; + u8 *buf = (u8 *) bh->buf; + + if (!curlun) { /* Unsupported LUNs are okay */ + common->bad_lun_okay = 1; + memset(buf, 0, 36); + buf[0] = 0x7f; /* Unsupported, no device-type */ + buf[4] = 31; /* Additional length */ + return 36; + } + + buf[0] = curlun->cdrom ? TYPE_ROM : TYPE_DISK; + buf[1] = curlun->removable ? 0x80 : 0; + buf[2] = 2; /* ANSI SCSI level 2 */ + buf[3] = 2; /* SCSI-2 INQUIRY data format */ + buf[4] = 31; /* Additional length */ + buf[5] = 0; /* No special options */ + buf[6] = 0; + buf[7] = 0; + memcpy(buf + 8, common->inquiry_string, sizeof common->inquiry_string); + return 36; +} + +static int do_request_sense(struct fsg_common *common, struct fsg_buffhd *bh) +{ + struct fsg_lun *curlun = common->curlun; + u8 *buf = (u8 *) bh->buf; + u32 sd, sdinfo; + int valid; + + /* + * From the SCSI-2 spec., section 7.9 (Unit attention condition): + * + * If a REQUEST SENSE command is received from an initiator + * with a pending unit attention condition (before the target + * generates the contingent allegiance condition), then the + * target shall either: + * a) report any pending sense data and preserve the unit + * attention condition on the logical unit, or, + * b) report the unit attention condition, may discard any + * pending sense data, and clear the unit attention + * condition on the logical unit for that initiator. + * + * FSG normally uses option a); enable this code to use option b). + */ +#if 0 + if (curlun && curlun->unit_attention_data != SS_NO_SENSE) { + curlun->sense_data = curlun->unit_attention_data; + curlun->unit_attention_data = SS_NO_SENSE; + } +#endif + + if (!curlun) { /* Unsupported LUNs are okay */ + common->bad_lun_okay = 1; + sd = SS_LOGICAL_UNIT_NOT_SUPPORTED; + sdinfo = 0; + valid = 0; + } else { + sd = curlun->sense_data; + sdinfo = curlun->sense_data_info; + valid = curlun->info_valid << 7; + curlun->sense_data = SS_NO_SENSE; + curlun->sense_data_info = 0; + curlun->info_valid = 0; + } + + memset(buf, 0, 18); + buf[0] = valid | 0x70; /* Valid, current error */ + buf[2] = SK(sd); + put_unaligned_be32(sdinfo, &buf[3]); /* Sense information */ + buf[7] = 18 - 8; /* Additional sense length */ + buf[12] = ASC(sd); + buf[13] = ASCQ(sd); + return 18; +} + +static int do_read_capacity(struct fsg_common *common, struct fsg_buffhd *bh) +{ + struct fsg_lun *curlun = common->curlun; + u32 lba = get_unaligned_be32(&common->cmnd[2]); + int pmi = common->cmnd[8]; + u8 *buf = (u8 *)bh->buf; + + /* Check the PMI and LBA fields */ + if (pmi > 1 || (pmi == 0 && lba != 0)) { + curlun->sense_data = SS_INVALID_FIELD_IN_CDB; + return -EINVAL; + } + + put_unaligned_be32(curlun->num_sectors - 1, &buf[0]); + /* Max logical block */ + put_unaligned_be32(curlun->blksize, &buf[4]);/* Block length */ + return 8; +} + +static int do_read_header(struct fsg_common *common, struct fsg_buffhd *bh) +{ + struct fsg_lun *curlun = common->curlun; + int msf = common->cmnd[1] & 0x02; + u32 lba = get_unaligned_be32(&common->cmnd[2]); + u8 *buf = (u8 *)bh->buf; + + if (common->cmnd[1] & ~0x02) { /* Mask away MSF */ + curlun->sense_data = SS_INVALID_FIELD_IN_CDB; + return -EINVAL; + } + if (lba >= curlun->num_sectors) { + curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; + return -EINVAL; + } + + memset(buf, 0, 8); + buf[0] = 0x01; /* 2048 bytes of user data, rest is EC */ + store_cdrom_address(&buf[4], msf, lba); + return 8; +} + +static int do_read_toc(struct fsg_common *common, struct fsg_buffhd *bh) +{ + struct fsg_lun *curlun = common->curlun; + int msf = common->cmnd[1] & 0x02; + int start_track = common->cmnd[6]; + u8 *buf = (u8 *)bh->buf; + + if ((common->cmnd[1] & ~0x02) != 0 || /* Mask away MSF */ + start_track > 1) { + curlun->sense_data = SS_INVALID_FIELD_IN_CDB; + return -EINVAL; + } + + memset(buf, 0, 20); + buf[1] = (20-2); /* TOC data length */ + buf[2] = 1; /* First track number */ + buf[3] = 1; /* Last track number */ + buf[5] = 0x16; /* Data track, copying allowed */ + buf[6] = 0x01; /* Only track is number 1 */ + store_cdrom_address(&buf[8], msf, 0); + + buf[13] = 0x16; /* Lead-out track is data */ + buf[14] = 0xAA; /* Lead-out track number */ + store_cdrom_address(&buf[16], msf, curlun->num_sectors); + return 20; +} + +static int do_mode_sense(struct fsg_common *common, struct fsg_buffhd *bh) +{ + struct fsg_lun *curlun = common->curlun; + int mscmnd = common->cmnd[0]; + u8 *buf = (u8 *) bh->buf; + u8 *buf0 = buf; + int pc, page_code; + int changeable_values, all_pages; + int valid_page = 0; + int len, limit; + + if ((common->cmnd[1] & ~0x08) != 0) { /* Mask away DBD */ + curlun->sense_data = SS_INVALID_FIELD_IN_CDB; + return -EINVAL; + } + pc = common->cmnd[2] >> 6; + page_code = common->cmnd[2] & 0x3f; + if (pc == 3) { + curlun->sense_data = SS_SAVING_PARAMETERS_NOT_SUPPORTED; + return -EINVAL; + } + changeable_values = (pc == 1); + all_pages = (page_code == 0x3f); + + /* + * Write the mode parameter header. Fixed values are: default + * medium type, no cache control (DPOFUA), and no block descriptors. + * The only variable value is the WriteProtect bit. We will fill in + * the mode data length later. + */ + memset(buf, 0, 8); + if (mscmnd == MODE_SENSE) { + buf[2] = (curlun->ro ? 0x80 : 0x00); /* WP, DPOFUA */ + buf += 4; + limit = 255; + } else { /* MODE_SENSE_10 */ + buf[3] = (curlun->ro ? 0x80 : 0x00); /* WP, DPOFUA */ + buf += 8; + limit = 65535; /* Should really be FSG_BUFLEN */ + } + + /* No block descriptors */ + + /* + * The mode pages, in numerical order. The only page we support + * is the Caching page. + */ + if (page_code == 0x08 || all_pages) { + valid_page = 1; + buf[0] = 0x08; /* Page code */ + buf[1] = 10; /* Page length */ + memset(buf+2, 0, 10); /* None of the fields are changeable */ + + if (!changeable_values) { + buf[2] = 0x04; /* Write cache enable, */ + /* Read cache not disabled */ + /* No cache retention priorities */ + put_unaligned_be16(0xffff, &buf[4]); + /* Don't disable prefetch */ + /* Minimum prefetch = 0 */ + put_unaligned_be16(0xffff, &buf[8]); + /* Maximum prefetch */ + put_unaligned_be16(0xffff, &buf[10]); + /* Maximum prefetch ceiling */ + } + buf += 12; + } + + /* + * Check that a valid page was requested and the mode data length + * isn't too long. + */ + len = buf - buf0; + if (!valid_page || len > limit) { + curlun->sense_data = SS_INVALID_FIELD_IN_CDB; + return -EINVAL; + } + + /* Store the mode data length */ + if (mscmnd == MODE_SENSE) + buf0[0] = len - 1; + else + put_unaligned_be16(len - 2, buf0); + return len; +} + +static int do_start_stop(struct fsg_common *common) +{ + struct fsg_lun *curlun = common->curlun; + int loej, start; + + if (!curlun) { + return -EINVAL; + } else if (!curlun->removable) { + curlun->sense_data = SS_INVALID_COMMAND; + return -EINVAL; + } else if ((common->cmnd[1] & ~0x01) != 0 || /* Mask away Immed */ + (common->cmnd[4] & ~0x03) != 0) { /* Mask LoEj, Start */ + curlun->sense_data = SS_INVALID_FIELD_IN_CDB; + return -EINVAL; + } + + loej = common->cmnd[4] & 0x02; + start = common->cmnd[4] & 0x01; + + /* + * Our emulation doesn't support mounting; the medium is + * available for use as soon as it is loaded. + */ + if (start) { + if (!fsg_lun_is_open(curlun)) { + curlun->sense_data = SS_MEDIUM_NOT_PRESENT; + return -EINVAL; + } + return 0; + } + + /* Are we allowed to unload the media? */ + if (curlun->prevent_medium_removal) { + LDBG(curlun, "unload attempt prevented\n"); + curlun->sense_data = SS_MEDIUM_REMOVAL_PREVENTED; + return -EINVAL; + } + + if (!loej) + return 0; + + /* Simulate an unload/eject */ + if (common->ops && common->ops->pre_eject) { + int r = common->ops->pre_eject(common, curlun, + curlun - common->luns); + if (unlikely(r < 0)) + return r; + else if (r) + return 0; + } + + up_read(&common->filesem); + down_write(&common->filesem); + fsg_lun_close(curlun); + up_write(&common->filesem); + down_read(&common->filesem); + + return common->ops && common->ops->post_eject + ? min(0, common->ops->post_eject(common, curlun, + curlun - common->luns)) + : 0; +} + +static int do_prevent_allow(struct fsg_common *common) +{ + struct fsg_lun *curlun = common->curlun; + int prevent; + + if (!common->curlun) { + return -EINVAL; + } else if (!common->curlun->removable) { + common->curlun->sense_data = SS_INVALID_COMMAND; + return -EINVAL; + } + + prevent = common->cmnd[4] & 0x01; + if ((common->cmnd[4] & ~0x01) != 0) { /* Mask away Prevent */ + curlun->sense_data = SS_INVALID_FIELD_IN_CDB; + return -EINVAL; + } + + if (curlun->prevent_medium_removal && !prevent) + fsg_lun_fsync_sub(curlun); + curlun->prevent_medium_removal = prevent; + return 0; +} + +static int do_read_format_capacities(struct fsg_common *common, + struct fsg_buffhd *bh) +{ + struct fsg_lun *curlun = common->curlun; + u8 *buf = (u8 *) bh->buf; + + buf[0] = buf[1] = buf[2] = 0; + buf[3] = 8; /* Only the Current/Maximum Capacity Descriptor */ + buf += 4; + + put_unaligned_be32(curlun->num_sectors, &buf[0]); + /* Number of blocks */ + put_unaligned_be32(curlun->blksize, &buf[4]);/* Block length */ + buf[4] = 0x02; /* Current capacity */ + return 12; +} + +static int do_mode_select(struct fsg_common *common, struct fsg_buffhd *bh) +{ + struct fsg_lun *curlun = common->curlun; + + /* We don't support MODE SELECT */ + if (curlun) + curlun->sense_data = SS_INVALID_COMMAND; + return -EINVAL; +} + + +/*-------------------------------------------------------------------------*/ + +static int halt_bulk_in_endpoint(struct fsg_dev *fsg) +{ + int rc; + + rc = fsg_set_halt(fsg, fsg->bulk_in); + if (rc == -EAGAIN) + VDBG(fsg, "delayed bulk-in endpoint halt\n"); + while (rc != 0) { + if (rc != -EAGAIN) { + WARNING(fsg, "usb_ep_set_halt -> %d\n", rc); + rc = 0; + break; + } + + /* Wait for a short time and then try again */ + if (msleep_interruptible(100) != 0) + return -EINTR; + rc = usb_ep_set_halt(fsg->bulk_in); + } + return rc; +} + +static int wedge_bulk_in_endpoint(struct fsg_dev *fsg) +{ + int rc; + + DBG(fsg, "bulk-in set wedge\n"); + rc = usb_ep_set_wedge(fsg->bulk_in); + if (rc == -EAGAIN) + VDBG(fsg, "delayed bulk-in endpoint wedge\n"); + while (rc != 0) { + if (rc != -EAGAIN) { + WARNING(fsg, "usb_ep_set_wedge -> %d\n", rc); + rc = 0; + break; + } + + /* Wait for a short time and then try again */ + if (msleep_interruptible(100) != 0) + return -EINTR; + rc = usb_ep_set_wedge(fsg->bulk_in); + } + return rc; +} + +static int throw_away_data(struct fsg_common *common) +{ + struct fsg_buffhd *bh; + u32 amount; + int rc; + + for (bh = common->next_buffhd_to_drain; + bh->state != BUF_STATE_EMPTY || common->usb_amount_left > 0; + bh = common->next_buffhd_to_drain) { + + /* Throw away the data in a filled buffer */ + if (bh->state == BUF_STATE_FULL) { + smp_rmb(); + bh->state = BUF_STATE_EMPTY; + common->next_buffhd_to_drain = bh->next; + + /* A short packet or an error ends everything */ + if (bh->outreq->actual < bh->bulk_out_intended_length || + bh->outreq->status != 0) { + raise_exception(common, + FSG_STATE_ABORT_BULK_OUT); + return -EINTR; + } + continue; + } + + /* Try to submit another request if we need one */ + bh = common->next_buffhd_to_fill; + if (bh->state == BUF_STATE_EMPTY + && common->usb_amount_left > 0) { + amount = min(common->usb_amount_left, FSG_BUFLEN); + + /* + * Except at the end of the transfer, amount will be + * equal to the buffer size, which is divisible by + * the bulk-out maxpacket size. + */ + set_bulk_out_req_length(common, bh, amount); + if (!start_out_transfer(common, bh)) + /* Dunno what to do if common->fsg is NULL */ + return -EIO; + common->next_buffhd_to_fill = bh->next; + common->usb_amount_left -= amount; + continue; + } + + /* Otherwise wait for something to happen */ + rc = sleep_thread(common); + if (rc) + return rc; + } + return 0; +} + +static int finish_reply(struct fsg_common *common) +{ + struct fsg_buffhd *bh = common->next_buffhd_to_fill; + int rc = 0; + + switch (common->data_dir) { + case DATA_DIR_NONE: + break; /* Nothing to send */ + + /* + * If we don't know whether the host wants to read or write, + * this must be CB or CBI with an unknown command. We mustn't + * try to send or receive any data. So stall both bulk pipes + * if we can and wait for a reset. + */ + case DATA_DIR_UNKNOWN: + if (!common->can_stall) { + /* Nothing */ + } else if (fsg_is_set(common)) { + fsg_set_halt(common->fsg, common->fsg->bulk_out); + rc = halt_bulk_in_endpoint(common->fsg); + } else { + /* Don't know what to do if common->fsg is NULL */ + rc = -EIO; + } + break; + + /* All but the last buffer of data must have already been sent */ + case DATA_DIR_TO_HOST: + if (common->data_size == 0) { + /* Nothing to send */ + + /* Don't know what to do if common->fsg is NULL */ + } else if (!fsg_is_set(common)) { + rc = -EIO; + + /* If there's no residue, simply send the last buffer */ + } else if (common->residue == 0) { + bh->inreq->zero = 0; + if (!start_in_transfer(common, bh)) + return -EIO; + common->next_buffhd_to_fill = bh->next; + + /* + * For Bulk-only, mark the end of the data with a short + * packet. If we are allowed to stall, halt the bulk-in + * endpoint. (Note: This violates the Bulk-Only Transport + * specification, which requires us to pad the data if we + * don't halt the endpoint. Presumably nobody will mind.) + */ + } else { + bh->inreq->zero = 1; + if (!start_in_transfer(common, bh)) + rc = -EIO; + common->next_buffhd_to_fill = bh->next; + if (common->can_stall) + rc = halt_bulk_in_endpoint(common->fsg); + } + break; + + /* + * We have processed all we want from the data the host has sent. + * There may still be outstanding bulk-out requests. + */ + case DATA_DIR_FROM_HOST: + if (common->residue == 0) { + /* Nothing to receive */ + + /* Did the host stop sending unexpectedly early? */ + } else if (common->short_packet_received) { + raise_exception(common, FSG_STATE_ABORT_BULK_OUT); + rc = -EINTR; + + /* + * We haven't processed all the incoming data. Even though + * we may be allowed to stall, doing so would cause a race. + * The controller may already have ACK'ed all the remaining + * bulk-out packets, in which case the host wouldn't see a + * STALL. Not realizing the endpoint was halted, it wouldn't + * clear the halt -- leading to problems later on. + */ +#if 0 + } else if (common->can_stall) { + if (fsg_is_set(common)) + fsg_set_halt(common->fsg, + common->fsg->bulk_out); + raise_exception(common, FSG_STATE_ABORT_BULK_OUT); + rc = -EINTR; +#endif + + /* + * We can't stall. Read in the excess data and throw it + * all away. + */ + } else { + rc = throw_away_data(common); + } + break; + } + return rc; +} + +static int send_status(struct fsg_common *common) +{ + struct fsg_lun *curlun = common->curlun; + struct fsg_buffhd *bh; + struct bulk_cs_wrap *csw; + int rc; + u8 status = US_BULK_STAT_OK; + u32 sd, sdinfo = 0; + + /* Wait for the next buffer to become available */ + bh = common->next_buffhd_to_fill; + while (bh->state != BUF_STATE_EMPTY) { + rc = sleep_thread(common); + if (rc) + return rc; + } + + if (curlun) { + sd = curlun->sense_data; + sdinfo = curlun->sense_data_info; + } else if (common->bad_lun_okay) + sd = SS_NO_SENSE; + else + sd = SS_LOGICAL_UNIT_NOT_SUPPORTED; + + if (common->phase_error) { + DBG(common, "sending phase-error status\n"); + status = US_BULK_STAT_PHASE; + sd = SS_INVALID_COMMAND; + } else if (sd != SS_NO_SENSE) { + DBG(common, "sending command-failure status\n"); + status = US_BULK_STAT_FAIL; + VDBG(common, " sense data: SK x%02x, ASC x%02x, ASCQ x%02x;" + " info x%x\n", + SK(sd), ASC(sd), ASCQ(sd), sdinfo); + } + + /* Store and send the Bulk-only CSW */ + csw = (void *)bh->buf; + + csw->Signature = cpu_to_le32(US_BULK_CS_SIGN); + csw->Tag = common->tag; + csw->Residue = cpu_to_le32(common->residue); + csw->Status = status; + + bh->inreq->length = US_BULK_CS_WRAP_LEN; + bh->inreq->zero = 0; + if (!start_in_transfer(common, bh)) + /* Don't know what to do if common->fsg is NULL */ + return -EIO; + + common->next_buffhd_to_fill = bh->next; + return 0; +} + + +/*-------------------------------------------------------------------------*/ + +/* + * Check whether the command is properly formed and whether its data size + * and direction agree with the values we already have. + */ +static int check_command(struct fsg_common *common, int cmnd_size, + enum data_direction data_dir, unsigned int mask, + int needs_medium, const char *name) +{ + int i; + int lun = common->cmnd[1] >> 5; + static const char dirletter[4] = {'u', 'o', 'i', 'n'}; + char hdlen[20]; + struct fsg_lun *curlun; + + hdlen[0] = 0; + if (common->data_dir != DATA_DIR_UNKNOWN) + sprintf(hdlen, ", H%c=%u", dirletter[(int) common->data_dir], + common->data_size); + VDBG(common, "SCSI command: %s; Dc=%d, D%c=%u; Hc=%d%s\n", + name, cmnd_size, dirletter[(int) data_dir], + common->data_size_from_cmnd, common->cmnd_size, hdlen); + + /* + * We can't reply at all until we know the correct data direction + * and size. + */ + if (common->data_size_from_cmnd == 0) + data_dir = DATA_DIR_NONE; + if (common->data_size < common->data_size_from_cmnd) { + /* + * Host data size < Device data size is a phase error. + * Carry out the command, but only transfer as much as + * we are allowed. + */ + common->data_size_from_cmnd = common->data_size; + common->phase_error = 1; + } + common->residue = common->data_size; + common->usb_amount_left = common->data_size; + + /* Conflicting data directions is a phase error */ + if (common->data_dir != data_dir && common->data_size_from_cmnd > 0) { + common->phase_error = 1; + return -EINVAL; + } + + /* Verify the length of the command itself */ + if (cmnd_size != common->cmnd_size) { + + /* + * Special case workaround: There are plenty of buggy SCSI + * implementations. Many have issues with cbw->Length + * field passing a wrong command size. For those cases we + * always try to work around the problem by using the length + * sent by the host side provided it is at least as large + * as the correct command length. + * Examples of such cases would be MS-Windows, which issues + * REQUEST SENSE with cbw->Length == 12 where it should + * be 6, and xbox360 issuing INQUIRY, TEST UNIT READY and + * REQUEST SENSE with cbw->Length == 10 where it should + * be 6 as well. + */ + if (cmnd_size <= common->cmnd_size) { + DBG(common, "%s is buggy! Expected length %d " + "but we got %d\n", name, + cmnd_size, common->cmnd_size); + cmnd_size = common->cmnd_size; + } else { + common->phase_error = 1; + return -EINVAL; + } + } + + /* Check that the LUN values are consistent */ + if (common->lun != lun) + DBG(common, "using LUN %d from CBW, not LUN %d from CDB\n", + common->lun, lun); + + /* Check the LUN */ + curlun = common->curlun; + if (curlun) { + if (common->cmnd[0] != REQUEST_SENSE) { + curlun->sense_data = SS_NO_SENSE; + curlun->sense_data_info = 0; + curlun->info_valid = 0; + } + } else { + common->bad_lun_okay = 0; + + /* + * INQUIRY and REQUEST SENSE commands are explicitly allowed + * to use unsupported LUNs; all others may not. + */ + if (common->cmnd[0] != INQUIRY && + common->cmnd[0] != REQUEST_SENSE) { + DBG(common, "unsupported LUN %d\n", common->lun); + return -EINVAL; + } + } + + /* + * If a unit attention condition exists, only INQUIRY and + * REQUEST SENSE commands are allowed; anything else must fail. + */ + if (curlun && curlun->unit_attention_data != SS_NO_SENSE && + common->cmnd[0] != INQUIRY && + common->cmnd[0] != REQUEST_SENSE) { + curlun->sense_data = curlun->unit_attention_data; + curlun->unit_attention_data = SS_NO_SENSE; + return -EINVAL; + } + + /* Check that only command bytes listed in the mask are non-zero */ + common->cmnd[1] &= 0x1f; /* Mask away the LUN */ + for (i = 1; i < cmnd_size; ++i) { + if (common->cmnd[i] && !(mask & (1 << i))) { + if (curlun) + curlun->sense_data = SS_INVALID_FIELD_IN_CDB; + return -EINVAL; + } + } + + /* If the medium isn't mounted and the command needs to access + * it, return an error. */ + if (curlun && !fsg_lun_is_open(curlun) && needs_medium) { + curlun->sense_data = SS_MEDIUM_NOT_PRESENT; + return -EINVAL; + } + + return 0; +} + +/* wrapper of check_command for data size in blocks handling */ +static int check_command_size_in_blocks(struct fsg_common *common, + int cmnd_size, enum data_direction data_dir, + unsigned int mask, int needs_medium, const char *name) +{ + if (common->curlun) + common->data_size_from_cmnd <<= common->curlun->blkbits; + return check_command(common, cmnd_size, data_dir, + mask, needs_medium, name); +} + +static int do_scsi_command(struct fsg_common *common) +{ + struct fsg_buffhd *bh; + int rc; + int reply = -EINVAL; + int i; + static char unknown[16]; + + dump_cdb(common); + + /* Wait for the next buffer to become available for data or status */ + bh = common->next_buffhd_to_fill; + common->next_buffhd_to_drain = bh; + while (bh->state != BUF_STATE_EMPTY) { + rc = sleep_thread(common); + if (rc) + return rc; + } + common->phase_error = 0; + common->short_packet_received = 0; + + down_read(&common->filesem); /* We're using the backing file */ + switch (common->cmnd[0]) { + + case INQUIRY: + common->data_size_from_cmnd = common->cmnd[4]; + reply = check_command(common, 6, DATA_DIR_TO_HOST, + (1<<4), 0, + "INQUIRY"); + if (reply == 0) + reply = do_inquiry(common, bh); + break; + + case MODE_SELECT: + common->data_size_from_cmnd = common->cmnd[4]; + reply = check_command(common, 6, DATA_DIR_FROM_HOST, + (1<<1) | (1<<4), 0, + "MODE SELECT(6)"); + if (reply == 0) + reply = do_mode_select(common, bh); + break; + + case MODE_SELECT_10: + common->data_size_from_cmnd = + get_unaligned_be16(&common->cmnd[7]); + reply = check_command(common, 10, DATA_DIR_FROM_HOST, + (1<<1) | (3<<7), 0, + "MODE SELECT(10)"); + if (reply == 0) + reply = do_mode_select(common, bh); + break; + + case MODE_SENSE: + common->data_size_from_cmnd = common->cmnd[4]; + reply = check_command(common, 6, DATA_DIR_TO_HOST, + (1<<1) | (1<<2) | (1<<4), 0, + "MODE SENSE(6)"); + if (reply == 0) + reply = do_mode_sense(common, bh); + break; + + case MODE_SENSE_10: + common->data_size_from_cmnd = + get_unaligned_be16(&common->cmnd[7]); + reply = check_command(common, 10, DATA_DIR_TO_HOST, + (1<<1) | (1<<2) | (3<<7), 0, + "MODE SENSE(10)"); + if (reply == 0) + reply = do_mode_sense(common, bh); + break; + + case ALLOW_MEDIUM_REMOVAL: + common->data_size_from_cmnd = 0; + reply = check_command(common, 6, DATA_DIR_NONE, + (1<<4), 0, + "PREVENT-ALLOW MEDIUM REMOVAL"); + if (reply == 0) + reply = do_prevent_allow(common); + break; + + case READ_6: + i = common->cmnd[4]; + common->data_size_from_cmnd = (i == 0) ? 256 : i; + reply = check_command_size_in_blocks(common, 6, + DATA_DIR_TO_HOST, + (7<<1) | (1<<4), 1, + "READ(6)"); + if (reply == 0) + reply = do_read(common); + break; + + case READ_10: + common->data_size_from_cmnd = + get_unaligned_be16(&common->cmnd[7]); + reply = check_command_size_in_blocks(common, 10, + DATA_DIR_TO_HOST, + (1<<1) | (0xf<<2) | (3<<7), 1, + "READ(10)"); + if (reply == 0) + reply = do_read(common); + break; + + case READ_12: + common->data_size_from_cmnd = + get_unaligned_be32(&common->cmnd[6]); + reply = check_command_size_in_blocks(common, 12, + DATA_DIR_TO_HOST, + (1<<1) | (0xf<<2) | (0xf<<6), 1, + "READ(12)"); + if (reply == 0) + reply = do_read(common); + break; + + case READ_CAPACITY: + common->data_size_from_cmnd = 8; + reply = check_command(common, 10, DATA_DIR_TO_HOST, + (0xf<<2) | (1<<8), 1, + "READ CAPACITY"); + if (reply == 0) + reply = do_read_capacity(common, bh); + break; + + case READ_HEADER: + if (!common->curlun || !common->curlun->cdrom) + goto unknown_cmnd; + common->data_size_from_cmnd = + get_unaligned_be16(&common->cmnd[7]); + reply = check_command(common, 10, DATA_DIR_TO_HOST, + (3<<7) | (0x1f<<1), 1, + "READ HEADER"); + if (reply == 0) + reply = do_read_header(common, bh); + break; + + case READ_TOC: + if (!common->curlun || !common->curlun->cdrom) + goto unknown_cmnd; + common->data_size_from_cmnd = + get_unaligned_be16(&common->cmnd[7]); + reply = check_command(common, 10, DATA_DIR_TO_HOST, + (7<<6) | (1<<1), 1, + "READ TOC"); + if (reply == 0) + reply = do_read_toc(common, bh); + break; + + case READ_FORMAT_CAPACITIES: + common->data_size_from_cmnd = + get_unaligned_be16(&common->cmnd[7]); + reply = check_command(common, 10, DATA_DIR_TO_HOST, + (3<<7), 1, + "READ FORMAT CAPACITIES"); + if (reply == 0) + reply = do_read_format_capacities(common, bh); + break; + + case REQUEST_SENSE: + common->data_size_from_cmnd = common->cmnd[4]; + reply = check_command(common, 6, DATA_DIR_TO_HOST, + (1<<4), 0, + "REQUEST SENSE"); + if (reply == 0) + reply = do_request_sense(common, bh); + break; + + case START_STOP: + common->data_size_from_cmnd = 0; + reply = check_command(common, 6, DATA_DIR_NONE, + (1<<1) | (1<<4), 0, + "START-STOP UNIT"); + if (reply == 0) + reply = do_start_stop(common); + break; + + case SYNCHRONIZE_CACHE: + common->data_size_from_cmnd = 0; + reply = check_command(common, 10, DATA_DIR_NONE, + (0xf<<2) | (3<<7), 1, + "SYNCHRONIZE CACHE"); + if (reply == 0) + reply = do_synchronize_cache(common); + break; + + case TEST_UNIT_READY: + common->data_size_from_cmnd = 0; + reply = check_command(common, 6, DATA_DIR_NONE, + 0, 1, + "TEST UNIT READY"); + break; + + /* + * Although optional, this command is used by MS-Windows. We + * support a minimal version: BytChk must be 0. + */ + case VERIFY: + common->data_size_from_cmnd = 0; + reply = check_command(common, 10, DATA_DIR_NONE, + (1<<1) | (0xf<<2) | (3<<7), 1, + "VERIFY"); + if (reply == 0) + reply = do_verify(common); + break; + + case WRITE_6: + i = common->cmnd[4]; + common->data_size_from_cmnd = (i == 0) ? 256 : i; + reply = check_command_size_in_blocks(common, 6, + DATA_DIR_FROM_HOST, + (7<<1) | (1<<4), 1, + "WRITE(6)"); + if (reply == 0) + reply = do_write(common); + break; + + case WRITE_10: + common->data_size_from_cmnd = + get_unaligned_be16(&common->cmnd[7]); + reply = check_command_size_in_blocks(common, 10, + DATA_DIR_FROM_HOST, + (1<<1) | (0xf<<2) | (3<<7), 1, + "WRITE(10)"); + if (reply == 0) + reply = do_write(common); + break; + + case WRITE_12: + common->data_size_from_cmnd = + get_unaligned_be32(&common->cmnd[6]); + reply = check_command_size_in_blocks(common, 12, + DATA_DIR_FROM_HOST, + (1<<1) | (0xf<<2) | (0xf<<6), 1, + "WRITE(12)"); + if (reply == 0) + reply = do_write(common); + break; + + /* + * Some mandatory commands that we recognize but don't implement. + * They don't mean much in this setting. It's left as an exercise + * for anyone interested to implement RESERVE and RELEASE in terms + * of Posix locks. + */ + case FORMAT_UNIT: + case RELEASE: + case RESERVE: + case SEND_DIAGNOSTIC: + /* Fall through */ + + default: +unknown_cmnd: + common->data_size_from_cmnd = 0; + sprintf(unknown, "Unknown x%02x", common->cmnd[0]); + reply = check_command(common, common->cmnd_size, + DATA_DIR_UNKNOWN, ~0, 0, unknown); + if (reply == 0) { + common->curlun->sense_data = SS_INVALID_COMMAND; + reply = -EINVAL; + } + break; + } + up_read(&common->filesem); + + if (reply == -EINTR || signal_pending(current)) + return -EINTR; + + /* Set up the single reply buffer for finish_reply() */ + if (reply == -EINVAL) + reply = 0; /* Error reply length */ + if (reply >= 0 && common->data_dir == DATA_DIR_TO_HOST) { + reply = min((u32)reply, common->data_size_from_cmnd); + bh->inreq->length = reply; + bh->state = BUF_STATE_FULL; + common->residue -= reply; + } /* Otherwise it's already set */ + + return 0; +} + + +/*-------------------------------------------------------------------------*/ + +static int received_cbw(struct fsg_dev *fsg, struct fsg_buffhd *bh) +{ + struct usb_request *req = bh->outreq; + struct bulk_cb_wrap *cbw = req->buf; + struct fsg_common *common = fsg->common; + + /* Was this a real packet? Should it be ignored? */ + if (req->status || test_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags)) + return -EINVAL; + + /* Is the CBW valid? */ + if (req->actual != US_BULK_CB_WRAP_LEN || + cbw->Signature != cpu_to_le32( + US_BULK_CB_SIGN)) { + DBG(fsg, "invalid CBW: len %u sig 0x%x\n", + req->actual, + le32_to_cpu(cbw->Signature)); + + /* + * The Bulk-only spec says we MUST stall the IN endpoint + * (6.6.1), so it's unavoidable. It also says we must + * retain this state until the next reset, but there's + * no way to tell the controller driver it should ignore + * Clear-Feature(HALT) requests. + * + * We aren't required to halt the OUT endpoint; instead + * we can simply accept and discard any data received + * until the next reset. + */ + wedge_bulk_in_endpoint(fsg); + set_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags); + return -EINVAL; + } + + /* Is the CBW meaningful? */ + if (cbw->Lun >= FSG_MAX_LUNS || cbw->Flags & ~US_BULK_FLAG_IN || + cbw->Length <= 0 || cbw->Length > MAX_COMMAND_SIZE) { + DBG(fsg, "non-meaningful CBW: lun = %u, flags = 0x%x, " + "cmdlen %u\n", + cbw->Lun, cbw->Flags, cbw->Length); + + /* + * We can do anything we want here, so let's stall the + * bulk pipes if we are allowed to. + */ + if (common->can_stall) { + fsg_set_halt(fsg, fsg->bulk_out); + halt_bulk_in_endpoint(fsg); + } + return -EINVAL; + } + + /* Save the command for later */ + common->cmnd_size = cbw->Length; + memcpy(common->cmnd, cbw->CDB, common->cmnd_size); + if (cbw->Flags & US_BULK_FLAG_IN) + common->data_dir = DATA_DIR_TO_HOST; + else + common->data_dir = DATA_DIR_FROM_HOST; + common->data_size = le32_to_cpu(cbw->DataTransferLength); + if (common->data_size == 0) + common->data_dir = DATA_DIR_NONE; + common->lun = cbw->Lun; + if (common->lun >= 0 && common->lun < common->nluns) + common->curlun = &common->luns[common->lun]; + else + common->curlun = NULL; + common->tag = cbw->Tag; + return 0; +} + +static int get_next_command(struct fsg_common *common) +{ + struct fsg_buffhd *bh; + int rc = 0; + + /* Wait for the next buffer to become available */ + bh = common->next_buffhd_to_fill; + while (bh->state != BUF_STATE_EMPTY) { + rc = sleep_thread(common); + if (rc) + return rc; + } + + /* Queue a request to read a Bulk-only CBW */ + set_bulk_out_req_length(common, bh, US_BULK_CB_WRAP_LEN); + if (!start_out_transfer(common, bh)) + /* Don't know what to do if common->fsg is NULL */ + return -EIO; + + /* + * We will drain the buffer in software, which means we + * can reuse it for the next filling. No need to advance + * next_buffhd_to_fill. + */ + + /* Wait for the CBW to arrive */ + while (bh->state != BUF_STATE_FULL) { + rc = sleep_thread(common); + if (rc) + return rc; + } + smp_rmb(); + rc = fsg_is_set(common) ? received_cbw(common->fsg, bh) : -EIO; + bh->state = BUF_STATE_EMPTY; + + return rc; +} + + +/*-------------------------------------------------------------------------*/ + +static int alloc_request(struct fsg_common *common, struct usb_ep *ep, + struct usb_request **preq) +{ + *preq = usb_ep_alloc_request(ep, GFP_ATOMIC); + if (*preq) + return 0; + ERROR(common, "can't allocate request for %s\n", ep->name); + return -ENOMEM; +} + +/* Reset interface setting and re-init endpoint state (toggle etc). */ +static int do_set_interface(struct fsg_common *common, struct fsg_dev *new_fsg) +{ + struct fsg_dev *fsg; + int i, rc = 0; + + if (common->running) + DBG(common, "reset interface\n"); + +reset: + /* Deallocate the requests */ + if (common->fsg) { + fsg = common->fsg; + + for (i = 0; i < fsg_num_buffers; ++i) { + struct fsg_buffhd *bh = &common->buffhds[i]; + + if (bh->inreq) { + usb_ep_free_request(fsg->bulk_in, bh->inreq); + bh->inreq = NULL; + } + if (bh->outreq) { + usb_ep_free_request(fsg->bulk_out, bh->outreq); + bh->outreq = NULL; + } + } + + /* Disable the endpoints */ + if (fsg->bulk_in_enabled) { + usb_ep_disable(fsg->bulk_in); + fsg->bulk_in_enabled = 0; + } + if (fsg->bulk_out_enabled) { + usb_ep_disable(fsg->bulk_out); + fsg->bulk_out_enabled = 0; + } + + common->fsg = NULL; + wake_up(&common->fsg_wait); + } + + common->running = 0; + if (!new_fsg || rc) + return rc; + + common->fsg = new_fsg; + fsg = common->fsg; + + /* Enable the endpoints */ + rc = config_ep_by_speed(common->gadget, &(fsg->function), fsg->bulk_in); + if (rc) + goto reset; + rc = usb_ep_enable(fsg->bulk_in); + if (rc) + goto reset; + fsg->bulk_in->driver_data = common; + fsg->bulk_in_enabled = 1; + + rc = config_ep_by_speed(common->gadget, &(fsg->function), + fsg->bulk_out); + if (rc) + goto reset; + rc = usb_ep_enable(fsg->bulk_out); + if (rc) + goto reset; + fsg->bulk_out->driver_data = common; + fsg->bulk_out_enabled = 1; + common->bulk_out_maxpacket = usb_endpoint_maxp(fsg->bulk_out->desc); + clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags); + + /* Allocate the requests */ + for (i = 0; i < fsg_num_buffers; ++i) { + struct fsg_buffhd *bh = &common->buffhds[i]; + + rc = alloc_request(common, fsg->bulk_in, &bh->inreq); + if (rc) + goto reset; + rc = alloc_request(common, fsg->bulk_out, &bh->outreq); + if (rc) + goto reset; + bh->inreq->buf = bh->outreq->buf = bh->buf; + bh->inreq->context = bh->outreq->context = bh; + bh->inreq->complete = bulk_in_complete; + bh->outreq->complete = bulk_out_complete; + } + + common->running = 1; + for (i = 0; i < common->nluns; ++i) + common->luns[i].unit_attention_data = SS_RESET_OCCURRED; + return rc; +} + + +/****************************** ALT CONFIGS ******************************/ + +static int fsg_set_alt(struct usb_function *f, unsigned intf, unsigned alt) +{ + struct fsg_dev *fsg = fsg_from_func(f); + fsg->common->new_fsg = fsg; + raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE); + return USB_GADGET_DELAYED_STATUS; +} + +static void fsg_disable(struct usb_function *f) +{ + struct fsg_dev *fsg = fsg_from_func(f); + fsg->common->new_fsg = NULL; + raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE); +} + + +/*-------------------------------------------------------------------------*/ + +static void handle_exception(struct fsg_common *common) +{ + siginfo_t info; + int i; + struct fsg_buffhd *bh; + enum fsg_state old_state; + struct fsg_lun *curlun; + unsigned int exception_req_tag; + + /* + * Clear the existing signals. Anything but SIGUSR1 is converted + * into a high-priority EXIT exception. + */ + for (;;) { + int sig = + dequeue_signal_lock(current, ¤t->blocked, &info); + if (!sig) + break; + if (sig != SIGUSR1) { + if (common->state < FSG_STATE_EXIT) + DBG(common, "Main thread exiting on signal\n"); + raise_exception(common, FSG_STATE_EXIT); + } + } + + /* Cancel all the pending transfers */ + if (likely(common->fsg)) { + for (i = 0; i < fsg_num_buffers; ++i) { + bh = &common->buffhds[i]; + if (bh->inreq_busy) + usb_ep_dequeue(common->fsg->bulk_in, bh->inreq); + if (bh->outreq_busy) + usb_ep_dequeue(common->fsg->bulk_out, + bh->outreq); + } + + /* Wait until everything is idle */ + for (;;) { + int num_active = 0; + for (i = 0; i < fsg_num_buffers; ++i) { + bh = &common->buffhds[i]; + num_active += bh->inreq_busy + bh->outreq_busy; + } + if (num_active == 0) + break; + if (sleep_thread(common)) + return; + } + + /* Clear out the controller's fifos */ + if (common->fsg->bulk_in_enabled) + usb_ep_fifo_flush(common->fsg->bulk_in); + if (common->fsg->bulk_out_enabled) + usb_ep_fifo_flush(common->fsg->bulk_out); + } + + /* + * Reset the I/O buffer states and pointers, the SCSI + * state, and the exception. Then invoke the handler. + */ + spin_lock_irq(&common->lock); + + for (i = 0; i < fsg_num_buffers; ++i) { + bh = &common->buffhds[i]; + bh->state = BUF_STATE_EMPTY; + } + common->next_buffhd_to_fill = &common->buffhds[0]; + common->next_buffhd_to_drain = &common->buffhds[0]; + exception_req_tag = common->exception_req_tag; + old_state = common->state; + + if (old_state == FSG_STATE_ABORT_BULK_OUT) + common->state = FSG_STATE_STATUS_PHASE; + else { + for (i = 0; i < common->nluns; ++i) { + curlun = &common->luns[i]; + curlun->prevent_medium_removal = 0; + curlun->sense_data = SS_NO_SENSE; + curlun->unit_attention_data = SS_NO_SENSE; + curlun->sense_data_info = 0; + curlun->info_valid = 0; + } + common->state = FSG_STATE_IDLE; + } + spin_unlock_irq(&common->lock); + + /* Carry out any extra actions required for the exception */ + switch (old_state) { + case FSG_STATE_ABORT_BULK_OUT: + send_status(common); + spin_lock_irq(&common->lock); + if (common->state == FSG_STATE_STATUS_PHASE) + common->state = FSG_STATE_IDLE; + spin_unlock_irq(&common->lock); + break; + + case FSG_STATE_RESET: + /* + * In case we were forced against our will to halt a + * bulk endpoint, clear the halt now. (The SuperH UDC + * requires this.) + */ + if (!fsg_is_set(common)) + break; + if (test_and_clear_bit(IGNORE_BULK_OUT, + &common->fsg->atomic_bitflags)) + usb_ep_clear_halt(common->fsg->bulk_in); + + if (common->ep0_req_tag == exception_req_tag) + ep0_queue(common); /* Complete the status stage */ + + /* + * Technically this should go here, but it would only be + * a waste of time. Ditto for the INTERFACE_CHANGE and + * CONFIG_CHANGE cases. + */ + /* for (i = 0; i < common->nluns; ++i) */ + /* common->luns[i].unit_attention_data = */ + /* SS_RESET_OCCURRED; */ + break; + + case FSG_STATE_CONFIG_CHANGE: + do_set_interface(common, common->new_fsg); + if (common->new_fsg) + usb_composite_setup_continue(common->cdev); + break; + + case FSG_STATE_EXIT: + case FSG_STATE_TERMINATED: + do_set_interface(common, NULL); /* Free resources */ + spin_lock_irq(&common->lock); + common->state = FSG_STATE_TERMINATED; /* Stop the thread */ + spin_unlock_irq(&common->lock); + break; + + case FSG_STATE_INTERFACE_CHANGE: + case FSG_STATE_DISCONNECT: + case FSG_STATE_COMMAND_PHASE: + case FSG_STATE_DATA_PHASE: + case FSG_STATE_STATUS_PHASE: + case FSG_STATE_IDLE: + break; + } +} + + +/*-------------------------------------------------------------------------*/ + +static int fsg_main_thread(void *common_) +{ + struct fsg_common *common = common_; + + /* + * Allow the thread to be killed by a signal, but set the signal mask + * to block everything but INT, TERM, KILL, and USR1. + */ + allow_signal(SIGINT); + allow_signal(SIGTERM); + allow_signal(SIGKILL); + allow_signal(SIGUSR1); + + /* Allow the thread to be frozen */ + set_freezable(); + + /* + * Arrange for userspace references to be interpreted as kernel + * pointers. That way we can pass a kernel pointer to a routine + * that expects a __user pointer and it will work okay. + */ + set_fs(get_ds()); + + /* The main loop */ + while (common->state != FSG_STATE_TERMINATED) { + if (exception_in_progress(common) || signal_pending(current)) { + handle_exception(common); + continue; + } + + if (!common->running) { + sleep_thread(common); + continue; + } + + if (get_next_command(common)) + continue; + + spin_lock_irq(&common->lock); + if (!exception_in_progress(common)) + common->state = FSG_STATE_DATA_PHASE; + spin_unlock_irq(&common->lock); + + if (do_scsi_command(common) || finish_reply(common)) + continue; + + spin_lock_irq(&common->lock); + if (!exception_in_progress(common)) + common->state = FSG_STATE_STATUS_PHASE; + spin_unlock_irq(&common->lock); + + if (send_status(common)) + continue; + + spin_lock_irq(&common->lock); + if (!exception_in_progress(common)) + common->state = FSG_STATE_IDLE; + spin_unlock_irq(&common->lock); + } + + spin_lock_irq(&common->lock); + common->thread_task = NULL; + spin_unlock_irq(&common->lock); + + if (!common->ops || !common->ops->thread_exits + || common->ops->thread_exits(common) < 0) { + struct fsg_lun *curlun = common->luns; + unsigned i = common->nluns; + + down_write(&common->filesem); + for (; i--; ++curlun) { + if (!fsg_lun_is_open(curlun)) + continue; + + fsg_lun_close(curlun); + curlun->unit_attention_data = SS_MEDIUM_NOT_PRESENT; + } + up_write(&common->filesem); + } + + /* Let fsg_unbind() know the thread has exited */ + complete_and_exit(&common->thread_notifier, 0); +} + + +/*************************** DEVICE ATTRIBUTES ***************************/ + +static DEVICE_ATTR(ro, 0644, fsg_show_ro, fsg_store_ro); +static DEVICE_ATTR(nofua, 0644, fsg_show_nofua, fsg_store_nofua); +static DEVICE_ATTR(file, 0644, fsg_show_file, fsg_store_file); + +static struct device_attribute dev_attr_ro_cdrom = + __ATTR(ro, 0444, fsg_show_ro, NULL); +static struct device_attribute dev_attr_file_nonremovable = + __ATTR(file, 0444, fsg_show_file, NULL); + + +/****************************** FSG COMMON ******************************/ + +static void fsg_common_release(struct kref *ref); + +static void fsg_lun_release(struct device *dev) +{ + /* Nothing needs to be done */ +} + +static inline void fsg_common_get(struct fsg_common *common) +{ + kref_get(&common->ref); +} + +static inline void fsg_common_put(struct fsg_common *common) +{ + kref_put(&common->ref, fsg_common_release); +} + +static struct fsg_common *fsg_common_init(struct fsg_common *common, + struct usb_composite_dev *cdev, + struct fsg_config *cfg) +{ + struct usb_gadget *gadget = cdev->gadget; + struct fsg_buffhd *bh; + struct fsg_lun *curlun; + struct fsg_lun_config *lcfg; + int nluns, i, rc; + char *pathbuf; + + rc = fsg_num_buffers_validate(); + if (rc != 0) + return ERR_PTR(rc); + + /* Find out how many LUNs there should be */ + nluns = cfg->nluns; + if (nluns < 1 || nluns > FSG_MAX_LUNS) { + dev_err(&gadget->dev, "invalid number of LUNs: %u\n", nluns); + return ERR_PTR(-EINVAL); + } + + /* Allocate? */ + if (!common) { + common = kzalloc(sizeof *common, GFP_KERNEL); + if (!common) + return ERR_PTR(-ENOMEM); + common->free_storage_on_release = 1; + } else { + memset(common, 0, sizeof *common); + common->free_storage_on_release = 0; + } + + common->buffhds = kcalloc(fsg_num_buffers, + sizeof *(common->buffhds), GFP_KERNEL); + if (!common->buffhds) { + if (common->free_storage_on_release) + kfree(common); + return ERR_PTR(-ENOMEM); + } + + common->ops = cfg->ops; + common->private_data = cfg->private_data; + + common->gadget = gadget; + common->ep0 = gadget->ep0; + common->ep0req = cdev->req; + common->cdev = cdev; + + /* Maybe allocate device-global string IDs, and patch descriptors */ + if (fsg_strings[FSG_STRING_INTERFACE].id == 0) { + rc = usb_string_id(cdev); + if (unlikely(rc < 0)) + goto error_release; + fsg_strings[FSG_STRING_INTERFACE].id = rc; + fsg_intf_desc.iInterface = rc; + } + + /* + * Create the LUNs, open their backing files, and register the + * LUN devices in sysfs. + */ + curlun = kcalloc(nluns, sizeof(*curlun), GFP_KERNEL); + if (unlikely(!curlun)) { + rc = -ENOMEM; + goto error_release; + } + common->luns = curlun; + + init_rwsem(&common->filesem); + + for (i = 0, lcfg = cfg->luns; i < nluns; ++i, ++curlun, ++lcfg) { + curlun->cdrom = !!lcfg->cdrom; + curlun->ro = lcfg->cdrom || lcfg->ro; + curlun->initially_ro = curlun->ro; + curlun->removable = lcfg->removable; + curlun->dev.release = fsg_lun_release; + curlun->dev.parent = &gadget->dev; + /* curlun->dev.driver = &fsg_driver.driver; XXX */ + dev_set_drvdata(&curlun->dev, &common->filesem); + dev_set_name(&curlun->dev, "lun%d", i); + + rc = device_register(&curlun->dev); + if (rc) { + INFO(common, "failed to register LUN%d: %d\n", i, rc); + common->nluns = i; + put_device(&curlun->dev); + goto error_release; + } + + rc = device_create_file(&curlun->dev, + curlun->cdrom + ? &dev_attr_ro_cdrom + : &dev_attr_ro); + if (rc) + goto error_luns; + rc = device_create_file(&curlun->dev, + curlun->removable + ? &dev_attr_file + : &dev_attr_file_nonremovable); + if (rc) + goto error_luns; + rc = device_create_file(&curlun->dev, &dev_attr_nofua); + if (rc) + goto error_luns; + + if (lcfg->filename) { + rc = fsg_lun_open(curlun, lcfg->filename); + if (rc) + goto error_luns; + } else if (!curlun->removable) { + ERROR(common, "no file given for LUN%d\n", i); + rc = -EINVAL; + goto error_luns; + } + } + common->nluns = nluns; + + /* Data buffers cyclic list */ + bh = common->buffhds; + i = fsg_num_buffers; + goto buffhds_first_it; + do { + bh->next = bh + 1; + ++bh; +buffhds_first_it: + bh->buf = kmalloc(FSG_BUFLEN, GFP_KERNEL); + if (unlikely(!bh->buf)) { + rc = -ENOMEM; + goto error_release; + } + } while (--i); + bh->next = common->buffhds; + + /* Prepare inquiryString */ + if (cfg->release != 0xffff) { + i = cfg->release; + } else { + i = usb_gadget_controller_number(gadget); + if (i >= 0) { + i = 0x0300 + i; + } else { + WARNING(common, "controller '%s' not recognized\n", + gadget->name); + i = 0x0399; + } + } + snprintf(common->inquiry_string, sizeof common->inquiry_string, + "%-8s%-16s%04x", cfg->vendor_name ?: "Linux", + /* Assume product name dependent on the first LUN */ + cfg->product_name ?: (common->luns->cdrom + ? "File-Stor Gadget" + : "File-CD Gadget"), + i); + + /* + * Some peripheral controllers are known not to be able to + * halt bulk endpoints correctly. If one of them is present, + * disable stalls. + */ + common->can_stall = cfg->can_stall && + !(gadget_is_at91(common->gadget)); + + spin_lock_init(&common->lock); + kref_init(&common->ref); + + /* Tell the thread to start working */ + common->thread_task = + kthread_create(fsg_main_thread, common, "file-storage"); + if (IS_ERR(common->thread_task)) { + rc = PTR_ERR(common->thread_task); + goto error_release; + } + init_completion(&common->thread_notifier); + init_waitqueue_head(&common->fsg_wait); + + /* Information */ + INFO(common, FSG_DRIVER_DESC ", version: " FSG_DRIVER_VERSION "\n"); + INFO(common, "Number of LUNs=%d\n", common->nluns); + + pathbuf = kmalloc(PATH_MAX, GFP_KERNEL); + for (i = 0, nluns = common->nluns, curlun = common->luns; + i < nluns; + ++curlun, ++i) { + char *p = "(no medium)"; + if (fsg_lun_is_open(curlun)) { + p = "(error)"; + if (pathbuf) { + p = d_path(&curlun->filp->f_path, + pathbuf, PATH_MAX); + if (IS_ERR(p)) + p = "(error)"; + } + } + LINFO(curlun, "LUN: %s%s%sfile: %s\n", + curlun->removable ? "removable " : "", + curlun->ro ? "read only " : "", + curlun->cdrom ? "CD-ROM " : "", + p); + } + kfree(pathbuf); + + DBG(common, "I/O thread pid: %d\n", task_pid_nr(common->thread_task)); + + wake_up_process(common->thread_task); + + return common; + +error_luns: + common->nluns = i + 1; +error_release: + common->state = FSG_STATE_TERMINATED; /* The thread is dead */ + /* Call fsg_common_release() directly, ref might be not initialised. */ + fsg_common_release(&common->ref); + return ERR_PTR(rc); +} + +static void fsg_common_release(struct kref *ref) +{ + struct fsg_common *common = container_of(ref, struct fsg_common, ref); + + /* If the thread isn't already dead, tell it to exit now */ + if (common->state != FSG_STATE_TERMINATED) { + raise_exception(common, FSG_STATE_EXIT); + wait_for_completion(&common->thread_notifier); + } + + if (likely(common->luns)) { + struct fsg_lun *lun = common->luns; + unsigned i = common->nluns; + + /* In error recovery common->nluns may be zero. */ + for (; i; --i, ++lun) { + device_remove_file(&lun->dev, &dev_attr_nofua); + device_remove_file(&lun->dev, + lun->cdrom + ? &dev_attr_ro_cdrom + : &dev_attr_ro); + device_remove_file(&lun->dev, + lun->removable + ? &dev_attr_file + : &dev_attr_file_nonremovable); + fsg_lun_close(lun); + device_unregister(&lun->dev); + } + + kfree(common->luns); + } + + { + struct fsg_buffhd *bh = common->buffhds; + unsigned i = fsg_num_buffers; + do { + kfree(bh->buf); + } while (++bh, --i); + } + + kfree(common->buffhds); + if (common->free_storage_on_release) + kfree(common); +} + + +/*-------------------------------------------------------------------------*/ + +static void fsg_unbind(struct usb_configuration *c, struct usb_function *f) +{ + struct fsg_dev *fsg = fsg_from_func(f); + struct fsg_common *common = fsg->common; + + DBG(fsg, "unbind\n"); + if (fsg->common->fsg == fsg) { + fsg->common->new_fsg = NULL; + raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE); + /* FIXME: make interruptible or killable somehow? */ + wait_event(common->fsg_wait, common->fsg != fsg); + } + + fsg_common_put(common); + usb_free_descriptors(fsg->function.descriptors); + usb_free_descriptors(fsg->function.hs_descriptors); + usb_free_descriptors(fsg->function.ss_descriptors); + kfree(fsg); +} + +static int fsg_bind(struct usb_configuration *c, struct usb_function *f) +{ + struct fsg_dev *fsg = fsg_from_func(f); + struct usb_gadget *gadget = c->cdev->gadget; + int i; + struct usb_ep *ep; + + fsg->gadget = gadget; + + /* New interface */ + i = usb_interface_id(c, f); + if (i < 0) + return i; + fsg_intf_desc.bInterfaceNumber = i; + fsg->interface_number = i; + + /* Find all the endpoints we will use */ + ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_in_desc); + if (!ep) + goto autoconf_fail; + ep->driver_data = fsg->common; /* claim the endpoint */ + fsg->bulk_in = ep; + + ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_out_desc); + if (!ep) + goto autoconf_fail; + ep->driver_data = fsg->common; /* claim the endpoint */ + fsg->bulk_out = ep; + + /* Copy descriptors */ + f->descriptors = usb_copy_descriptors(fsg_fs_function); + if (unlikely(!f->descriptors)) + return -ENOMEM; + + if (gadget_is_dualspeed(gadget)) { + /* Assume endpoint addresses are the same for both speeds */ + fsg_hs_bulk_in_desc.bEndpointAddress = + fsg_fs_bulk_in_desc.bEndpointAddress; + fsg_hs_bulk_out_desc.bEndpointAddress = + fsg_fs_bulk_out_desc.bEndpointAddress; + f->hs_descriptors = usb_copy_descriptors(fsg_hs_function); + if (unlikely(!f->hs_descriptors)) { + usb_free_descriptors(f->descriptors); + return -ENOMEM; + } + } + + if (gadget_is_superspeed(gadget)) { + unsigned max_burst; + + /* Calculate bMaxBurst, we know packet size is 1024 */ + max_burst = min_t(unsigned, FSG_BUFLEN / 1024, 15); + + fsg_ss_bulk_in_desc.bEndpointAddress = + fsg_fs_bulk_in_desc.bEndpointAddress; + fsg_ss_bulk_in_comp_desc.bMaxBurst = max_burst; + + fsg_ss_bulk_out_desc.bEndpointAddress = + fsg_fs_bulk_out_desc.bEndpointAddress; + fsg_ss_bulk_out_comp_desc.bMaxBurst = max_burst; + + f->ss_descriptors = usb_copy_descriptors(fsg_ss_function); + if (unlikely(!f->ss_descriptors)) { + usb_free_descriptors(f->hs_descriptors); + usb_free_descriptors(f->descriptors); + return -ENOMEM; + } + } + + return 0; + +autoconf_fail: + ERROR(fsg, "unable to autoconfigure all endpoints\n"); + return -ENOTSUPP; +} + + +/****************************** ADD FUNCTION ******************************/ + +static struct usb_gadget_strings *fsg_strings_array[] = { + &fsg_stringtab, + NULL, +}; + +static int fsg_bind_config(struct usb_composite_dev *cdev, + struct usb_configuration *c, + struct fsg_common *common) +{ + struct fsg_dev *fsg; + int rc; + + fsg = kzalloc(sizeof *fsg, GFP_KERNEL); + if (unlikely(!fsg)) + return -ENOMEM; + + fsg->function.name = FSG_DRIVER_DESC; + fsg->function.strings = fsg_strings_array; + fsg->function.bind = fsg_bind; + fsg->function.unbind = fsg_unbind; + fsg->function.setup = fsg_setup; + fsg->function.set_alt = fsg_set_alt; + fsg->function.disable = fsg_disable; + + fsg->common = common; + /* + * Our caller holds a reference to common structure so we + * don't have to be worry about it being freed until we return + * from this function. So instead of incrementing counter now + * and decrement in error recovery we increment it only when + * call to usb_add_function() was successful. + */ + + rc = usb_add_function(c, &fsg->function); + if (unlikely(rc)) + kfree(fsg); + else + fsg_common_get(fsg->common); + return rc; +} + + +/************************* Module parameters *************************/ + +struct fsg_module_parameters { + char *file[FSG_MAX_LUNS]; + bool ro[FSG_MAX_LUNS]; + bool removable[FSG_MAX_LUNS]; + bool cdrom[FSG_MAX_LUNS]; + bool nofua[FSG_MAX_LUNS]; + + unsigned int file_count, ro_count, removable_count, cdrom_count; + unsigned int nofua_count; + unsigned int luns; /* nluns */ + bool stall; /* can_stall */ +}; + +#define _FSG_MODULE_PARAM_ARRAY(prefix, params, name, type, desc) \ + module_param_array_named(prefix ## name, params.name, type, \ + &prefix ## params.name ## _count, \ + S_IRUGO); \ + MODULE_PARM_DESC(prefix ## name, desc) + +#define _FSG_MODULE_PARAM(prefix, params, name, type, desc) \ + module_param_named(prefix ## name, params.name, type, \ + S_IRUGO); \ + MODULE_PARM_DESC(prefix ## name, desc) + +#define FSG_MODULE_PARAMETERS(prefix, params) \ + _FSG_MODULE_PARAM_ARRAY(prefix, params, file, charp, \ + "names of backing files or devices"); \ + _FSG_MODULE_PARAM_ARRAY(prefix, params, ro, bool, \ + "true to force read-only"); \ + _FSG_MODULE_PARAM_ARRAY(prefix, params, removable, bool, \ + "true to simulate removable media"); \ + _FSG_MODULE_PARAM_ARRAY(prefix, params, cdrom, bool, \ + "true to simulate CD-ROM instead of disk"); \ + _FSG_MODULE_PARAM_ARRAY(prefix, params, nofua, bool, \ + "true to ignore SCSI WRITE(10,12) FUA bit"); \ + _FSG_MODULE_PARAM(prefix, params, luns, uint, \ + "number of LUNs"); \ + _FSG_MODULE_PARAM(prefix, params, stall, bool, \ + "false to prevent bulk stalls") + +static void +fsg_config_from_params(struct fsg_config *cfg, + const struct fsg_module_parameters *params) +{ + struct fsg_lun_config *lun; + unsigned i; + + /* Configure LUNs */ + cfg->nluns = + min(params->luns ?: (params->file_count ?: 1u), + (unsigned)FSG_MAX_LUNS); + for (i = 0, lun = cfg->luns; i < cfg->nluns; ++i, ++lun) { + lun->ro = !!params->ro[i]; + lun->cdrom = !!params->cdrom[i]; + lun->removable = !!params->removable[i]; + lun->filename = + params->file_count > i && params->file[i][0] + ? params->file[i] + : 0; + } + + /* Let MSF use defaults */ + cfg->vendor_name = 0; + cfg->product_name = 0; + cfg->release = 0xffff; + + cfg->ops = NULL; + cfg->private_data = NULL; + + /* Finalise */ + cfg->can_stall = params->stall; +} + +static inline struct fsg_common * +fsg_common_from_params(struct fsg_common *common, + struct usb_composite_dev *cdev, + const struct fsg_module_parameters *params) + __attribute__((unused)); +static inline struct fsg_common * +fsg_common_from_params(struct fsg_common *common, + struct usb_composite_dev *cdev, + const struct fsg_module_parameters *params) +{ + struct fsg_config cfg; + fsg_config_from_params(&cfg, params); + return fsg_common_init(common, cdev, &cfg); +} diff --git a/drivers/staging/ccg/f_rndis.c b/drivers/staging/ccg/f_rndis.c new file mode 100644 index 000000000000..b1681e45aca7 --- /dev/null +++ b/drivers/staging/ccg/f_rndis.c @@ -0,0 +1,918 @@ +/* + * f_rndis.c -- RNDIS link function driver + * + * Copyright (C) 2003-2005,2008 David Brownell + * Copyright (C) 2003-2004 Robert Schwebel, Benedikt Spranger + * Copyright (C) 2008 Nokia Corporation + * Copyright (C) 2009 Samsung Electronics + * Author: Michal Nazarewicz (mina86@mina86.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +/* #define VERBOSE_DEBUG */ + +#include <linux/slab.h> +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/etherdevice.h> + +#include <linux/atomic.h> + +#include "u_ether.h" +#include "rndis.h" + + +/* + * This function is an RNDIS Ethernet port -- a Microsoft protocol that's + * been promoted instead of the standard CDC Ethernet. The published RNDIS + * spec is ambiguous, incomplete, and needlessly complex. Variants such as + * ActiveSync have even worse status in terms of specification. + * + * In short: it's a protocol controlled by (and for) Microsoft, not for an + * Open ecosystem or markets. Linux supports it *only* because Microsoft + * doesn't support the CDC Ethernet standard. + * + * The RNDIS data transfer model is complex, with multiple Ethernet packets + * per USB message, and out of band data. The control model is built around + * what's essentially an "RNDIS RPC" protocol. It's all wrapped in a CDC ACM + * (modem, not Ethernet) veneer, with those ACM descriptors being entirely + * useless (they're ignored). RNDIS expects to be the only function in its + * configuration, so it's no real help if you need composite devices; and + * it expects to be the first configuration too. + * + * There is a single technical advantage of RNDIS over CDC Ethernet, if you + * discount the fluff that its RPC can be made to deliver: it doesn't need + * a NOP altsetting for the data interface. That lets it work on some of the + * "so smart it's stupid" hardware which takes over configuration changes + * from the software, and adds restrictions like "no altsettings". + * + * Unfortunately MSFT's RNDIS drivers are buggy. They hang or oops, and + * have all sorts of contrary-to-specification oddities that can prevent + * them from working sanely. Since bugfixes (or accurate specs, letting + * Linux work around those bugs) are unlikely to ever come from MSFT, you + * may want to avoid using RNDIS on purely operational grounds. + * + * Omissions from the RNDIS 1.0 specification include: + * + * - Power management ... references data that's scattered around lots + * of other documentation, which is incorrect/incomplete there too. + * + * - There are various undocumented protocol requirements, like the need + * to send garbage in some control-OUT messages. + * + * - MS-Windows drivers sometimes emit undocumented requests. + */ + +struct f_rndis { + struct gether port; + u8 ctrl_id, data_id; + u8 ethaddr[ETH_ALEN]; + u32 vendorID; + const char *manufacturer; + int config; + + struct usb_ep *notify; + struct usb_request *notify_req; + atomic_t notify_count; +}; + +static inline struct f_rndis *func_to_rndis(struct usb_function *f) +{ + return container_of(f, struct f_rndis, port.func); +} + +/* peak (theoretical) bulk transfer rate in bits-per-second */ +static unsigned int bitrate(struct usb_gadget *g) +{ + if (gadget_is_superspeed(g) && g->speed == USB_SPEED_SUPER) + return 13 * 1024 * 8 * 1000 * 8; + else if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH) + return 13 * 512 * 8 * 1000 * 8; + else + return 19 * 64 * 1 * 1000 * 8; +} + +/*-------------------------------------------------------------------------*/ + +/* + */ + +#define LOG2_STATUS_INTERVAL_MSEC 5 /* 1 << 5 == 32 msec */ +#define STATUS_BYTECOUNT 8 /* 8 bytes data */ + + +/* interface descriptor: */ + +static struct usb_interface_descriptor rndis_control_intf = { + .bLength = sizeof rndis_control_intf, + .bDescriptorType = USB_DT_INTERFACE, + + /* .bInterfaceNumber = DYNAMIC */ + /* status endpoint is optional; this could be patched later */ + .bNumEndpoints = 1, + .bInterfaceClass = USB_CLASS_COMM, + .bInterfaceSubClass = USB_CDC_SUBCLASS_ACM, + .bInterfaceProtocol = USB_CDC_ACM_PROTO_VENDOR, + /* .iInterface = DYNAMIC */ +}; + +static struct usb_cdc_header_desc header_desc = { + .bLength = sizeof header_desc, + .bDescriptorType = USB_DT_CS_INTERFACE, + .bDescriptorSubType = USB_CDC_HEADER_TYPE, + + .bcdCDC = cpu_to_le16(0x0110), +}; + +static struct usb_cdc_call_mgmt_descriptor call_mgmt_descriptor = { + .bLength = sizeof call_mgmt_descriptor, + .bDescriptorType = USB_DT_CS_INTERFACE, + .bDescriptorSubType = USB_CDC_CALL_MANAGEMENT_TYPE, + + .bmCapabilities = 0x00, + .bDataInterface = 0x01, +}; + +static struct usb_cdc_acm_descriptor rndis_acm_descriptor = { + .bLength = sizeof rndis_acm_descriptor, + .bDescriptorType = USB_DT_CS_INTERFACE, + .bDescriptorSubType = USB_CDC_ACM_TYPE, + + .bmCapabilities = 0x00, +}; + +static struct usb_cdc_union_desc rndis_union_desc = { + .bLength = sizeof(rndis_union_desc), + .bDescriptorType = USB_DT_CS_INTERFACE, + .bDescriptorSubType = USB_CDC_UNION_TYPE, + /* .bMasterInterface0 = DYNAMIC */ + /* .bSlaveInterface0 = DYNAMIC */ +}; + +/* the data interface has two bulk endpoints */ + +static struct usb_interface_descriptor rndis_data_intf = { + .bLength = sizeof rndis_data_intf, + .bDescriptorType = USB_DT_INTERFACE, + + /* .bInterfaceNumber = DYNAMIC */ + .bNumEndpoints = 2, + .bInterfaceClass = USB_CLASS_CDC_DATA, + .bInterfaceSubClass = 0, + .bInterfaceProtocol = 0, + /* .iInterface = DYNAMIC */ +}; + + +static struct usb_interface_assoc_descriptor +rndis_iad_descriptor = { + .bLength = sizeof rndis_iad_descriptor, + .bDescriptorType = USB_DT_INTERFACE_ASSOCIATION, + + .bFirstInterface = 0, /* XXX, hardcoded */ + .bInterfaceCount = 2, // control + data + .bFunctionClass = USB_CLASS_COMM, + .bFunctionSubClass = USB_CDC_SUBCLASS_ETHERNET, + .bFunctionProtocol = USB_CDC_PROTO_NONE, + /* .iFunction = DYNAMIC */ +}; + +/* full speed support: */ + +static struct usb_endpoint_descriptor fs_notify_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + .bEndpointAddress = USB_DIR_IN, + .bmAttributes = USB_ENDPOINT_XFER_INT, + .wMaxPacketSize = cpu_to_le16(STATUS_BYTECOUNT), + .bInterval = 1 << LOG2_STATUS_INTERVAL_MSEC, +}; + +static struct usb_endpoint_descriptor fs_in_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + .bEndpointAddress = USB_DIR_IN, + .bmAttributes = USB_ENDPOINT_XFER_BULK, +}; + +static struct usb_endpoint_descriptor fs_out_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + .bEndpointAddress = USB_DIR_OUT, + .bmAttributes = USB_ENDPOINT_XFER_BULK, +}; + +static struct usb_descriptor_header *eth_fs_function[] = { + (struct usb_descriptor_header *) &rndis_iad_descriptor, + + /* control interface matches ACM, not Ethernet */ + (struct usb_descriptor_header *) &rndis_control_intf, + (struct usb_descriptor_header *) &header_desc, + (struct usb_descriptor_header *) &call_mgmt_descriptor, + (struct usb_descriptor_header *) &rndis_acm_descriptor, + (struct usb_descriptor_header *) &rndis_union_desc, + (struct usb_descriptor_header *) &fs_notify_desc, + + /* data interface has no altsetting */ + (struct usb_descriptor_header *) &rndis_data_intf, + (struct usb_descriptor_header *) &fs_in_desc, + (struct usb_descriptor_header *) &fs_out_desc, + NULL, +}; + +/* high speed support: */ + +static struct usb_endpoint_descriptor hs_notify_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + .bEndpointAddress = USB_DIR_IN, + .bmAttributes = USB_ENDPOINT_XFER_INT, + .wMaxPacketSize = cpu_to_le16(STATUS_BYTECOUNT), + .bInterval = LOG2_STATUS_INTERVAL_MSEC + 4, +}; + +static struct usb_endpoint_descriptor hs_in_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + .bEndpointAddress = USB_DIR_IN, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .wMaxPacketSize = cpu_to_le16(512), +}; + +static struct usb_endpoint_descriptor hs_out_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + .bEndpointAddress = USB_DIR_OUT, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .wMaxPacketSize = cpu_to_le16(512), +}; + +static struct usb_descriptor_header *eth_hs_function[] = { + (struct usb_descriptor_header *) &rndis_iad_descriptor, + + /* control interface matches ACM, not Ethernet */ + (struct usb_descriptor_header *) &rndis_control_intf, + (struct usb_descriptor_header *) &header_desc, + (struct usb_descriptor_header *) &call_mgmt_descriptor, + (struct usb_descriptor_header *) &rndis_acm_descriptor, + (struct usb_descriptor_header *) &rndis_union_desc, + (struct usb_descriptor_header *) &hs_notify_desc, + + /* data interface has no altsetting */ + (struct usb_descriptor_header *) &rndis_data_intf, + (struct usb_descriptor_header *) &hs_in_desc, + (struct usb_descriptor_header *) &hs_out_desc, + NULL, +}; + +/* super speed support: */ + +static struct usb_endpoint_descriptor ss_notify_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + .bEndpointAddress = USB_DIR_IN, + .bmAttributes = USB_ENDPOINT_XFER_INT, + .wMaxPacketSize = cpu_to_le16(STATUS_BYTECOUNT), + .bInterval = LOG2_STATUS_INTERVAL_MSEC + 4, +}; + +static struct usb_ss_ep_comp_descriptor ss_intr_comp_desc = { + .bLength = sizeof ss_intr_comp_desc, + .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, + + /* the following 3 values can be tweaked if necessary */ + /* .bMaxBurst = 0, */ + /* .bmAttributes = 0, */ + .wBytesPerInterval = cpu_to_le16(STATUS_BYTECOUNT), +}; + +static struct usb_endpoint_descriptor ss_in_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + .bEndpointAddress = USB_DIR_IN, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .wMaxPacketSize = cpu_to_le16(1024), +}; + +static struct usb_endpoint_descriptor ss_out_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + .bEndpointAddress = USB_DIR_OUT, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .wMaxPacketSize = cpu_to_le16(1024), +}; + +static struct usb_ss_ep_comp_descriptor ss_bulk_comp_desc = { + .bLength = sizeof ss_bulk_comp_desc, + .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, + + /* the following 2 values can be tweaked if necessary */ + /* .bMaxBurst = 0, */ + /* .bmAttributes = 0, */ +}; + +static struct usb_descriptor_header *eth_ss_function[] = { + (struct usb_descriptor_header *) &rndis_iad_descriptor, + + /* control interface matches ACM, not Ethernet */ + (struct usb_descriptor_header *) &rndis_control_intf, + (struct usb_descriptor_header *) &header_desc, + (struct usb_descriptor_header *) &call_mgmt_descriptor, + (struct usb_descriptor_header *) &rndis_acm_descriptor, + (struct usb_descriptor_header *) &rndis_union_desc, + (struct usb_descriptor_header *) &ss_notify_desc, + (struct usb_descriptor_header *) &ss_intr_comp_desc, + + /* data interface has no altsetting */ + (struct usb_descriptor_header *) &rndis_data_intf, + (struct usb_descriptor_header *) &ss_in_desc, + (struct usb_descriptor_header *) &ss_bulk_comp_desc, + (struct usb_descriptor_header *) &ss_out_desc, + (struct usb_descriptor_header *) &ss_bulk_comp_desc, + NULL, +}; + +/* string descriptors: */ + +static struct usb_string rndis_string_defs[] = { + [0].s = "RNDIS Communications Control", + [1].s = "RNDIS Ethernet Data", + [2].s = "RNDIS", + { } /* end of list */ +}; + +static struct usb_gadget_strings rndis_string_table = { + .language = 0x0409, /* en-us */ + .strings = rndis_string_defs, +}; + +static struct usb_gadget_strings *rndis_strings[] = { + &rndis_string_table, + NULL, +}; + +/*-------------------------------------------------------------------------*/ + +static struct sk_buff *rndis_add_header(struct gether *port, + struct sk_buff *skb) +{ + struct sk_buff *skb2; + + skb2 = skb_realloc_headroom(skb, sizeof(struct rndis_packet_msg_type)); + if (skb2) + rndis_add_hdr(skb2); + + dev_kfree_skb_any(skb); + return skb2; +} + +static void rndis_response_available(void *_rndis) +{ + struct f_rndis *rndis = _rndis; + struct usb_request *req = rndis->notify_req; + struct usb_composite_dev *cdev = rndis->port.func.config->cdev; + __le32 *data = req->buf; + int status; + + if (atomic_inc_return(&rndis->notify_count) != 1) + return; + + /* Send RNDIS RESPONSE_AVAILABLE notification; a + * USB_CDC_NOTIFY_RESPONSE_AVAILABLE "should" work too + * + * This is the only notification defined by RNDIS. + */ + data[0] = cpu_to_le32(1); + data[1] = cpu_to_le32(0); + + status = usb_ep_queue(rndis->notify, req, GFP_ATOMIC); + if (status) { + atomic_dec(&rndis->notify_count); + DBG(cdev, "notify/0 --> %d\n", status); + } +} + +static void rndis_response_complete(struct usb_ep *ep, struct usb_request *req) +{ + struct f_rndis *rndis = req->context; + struct usb_composite_dev *cdev = rndis->port.func.config->cdev; + int status = req->status; + + /* after TX: + * - USB_CDC_GET_ENCAPSULATED_RESPONSE (ep0/control) + * - RNDIS_RESPONSE_AVAILABLE (status/irq) + */ + switch (status) { + case -ECONNRESET: + case -ESHUTDOWN: + /* connection gone */ + atomic_set(&rndis->notify_count, 0); + break; + default: + DBG(cdev, "RNDIS %s response error %d, %d/%d\n", + ep->name, status, + req->actual, req->length); + /* FALLTHROUGH */ + case 0: + if (ep != rndis->notify) + break; + + /* handle multiple pending RNDIS_RESPONSE_AVAILABLE + * notifications by resending until we're done + */ + if (atomic_dec_and_test(&rndis->notify_count)) + break; + status = usb_ep_queue(rndis->notify, req, GFP_ATOMIC); + if (status) { + atomic_dec(&rndis->notify_count); + DBG(cdev, "notify/1 --> %d\n", status); + } + break; + } +} + +static void rndis_command_complete(struct usb_ep *ep, struct usb_request *req) +{ + struct f_rndis *rndis = req->context; + struct usb_composite_dev *cdev = rndis->port.func.config->cdev; + int status; + + /* received RNDIS command from USB_CDC_SEND_ENCAPSULATED_COMMAND */ +// spin_lock(&dev->lock); + status = rndis_msg_parser(rndis->config, (u8 *) req->buf); + if (status < 0) + ERROR(cdev, "RNDIS command error %d, %d/%d\n", + status, req->actual, req->length); +// spin_unlock(&dev->lock); +} + +static int +rndis_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl) +{ + struct f_rndis *rndis = func_to_rndis(f); + struct usb_composite_dev *cdev = f->config->cdev; + struct usb_request *req = cdev->req; + int value = -EOPNOTSUPP; + u16 w_index = le16_to_cpu(ctrl->wIndex); + u16 w_value = le16_to_cpu(ctrl->wValue); + u16 w_length = le16_to_cpu(ctrl->wLength); + + /* composite driver infrastructure handles everything except + * CDC class messages; interface activation uses set_alt(). + */ + switch ((ctrl->bRequestType << 8) | ctrl->bRequest) { + + /* RNDIS uses the CDC command encapsulation mechanism to implement + * an RPC scheme, with much getting/setting of attributes by OID. + */ + case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8) + | USB_CDC_SEND_ENCAPSULATED_COMMAND: + if (w_value || w_index != rndis->ctrl_id) + goto invalid; + /* read the request; process it later */ + value = w_length; + req->complete = rndis_command_complete; + req->context = rndis; + /* later, rndis_response_available() sends a notification */ + break; + + case ((USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8) + | USB_CDC_GET_ENCAPSULATED_RESPONSE: + if (w_value || w_index != rndis->ctrl_id) + goto invalid; + else { + u8 *buf; + u32 n; + + /* return the result */ + buf = rndis_get_next_response(rndis->config, &n); + if (buf) { + memcpy(req->buf, buf, n); + req->complete = rndis_response_complete; + req->context = rndis; + rndis_free_response(rndis->config, buf); + value = n; + } + /* else stalls ... spec says to avoid that */ + } + break; + + default: +invalid: + VDBG(cdev, "invalid control req%02x.%02x v%04x i%04x l%d\n", + ctrl->bRequestType, ctrl->bRequest, + w_value, w_index, w_length); + } + + /* respond with data transfer or status phase? */ + if (value >= 0) { + DBG(cdev, "rndis req%02x.%02x v%04x i%04x l%d\n", + ctrl->bRequestType, ctrl->bRequest, + w_value, w_index, w_length); + req->zero = (value < w_length); + req->length = value; + value = usb_ep_queue(cdev->gadget->ep0, req, GFP_ATOMIC); + if (value < 0) + ERROR(cdev, "rndis response on err %d\n", value); + } + + /* device either stalls (value < 0) or reports success */ + return value; +} + + +static int rndis_set_alt(struct usb_function *f, unsigned intf, unsigned alt) +{ + struct f_rndis *rndis = func_to_rndis(f); + struct usb_composite_dev *cdev = f->config->cdev; + + /* we know alt == 0 */ + + if (intf == rndis->ctrl_id) { + if (rndis->notify->driver_data) { + VDBG(cdev, "reset rndis control %d\n", intf); + usb_ep_disable(rndis->notify); + } + if (!rndis->notify->desc) { + VDBG(cdev, "init rndis ctrl %d\n", intf); + if (config_ep_by_speed(cdev->gadget, f, rndis->notify)) + goto fail; + } + usb_ep_enable(rndis->notify); + rndis->notify->driver_data = rndis; + + } else if (intf == rndis->data_id) { + struct net_device *net; + + if (rndis->port.in_ep->driver_data) { + DBG(cdev, "reset rndis\n"); + gether_disconnect(&rndis->port); + } + + if (!rndis->port.in_ep->desc || !rndis->port.out_ep->desc) { + DBG(cdev, "init rndis\n"); + if (config_ep_by_speed(cdev->gadget, f, + rndis->port.in_ep) || + config_ep_by_speed(cdev->gadget, f, + rndis->port.out_ep)) { + rndis->port.in_ep->desc = NULL; + rndis->port.out_ep->desc = NULL; + goto fail; + } + } + + /* Avoid ZLPs; they can be troublesome. */ + rndis->port.is_zlp_ok = false; + + /* RNDIS should be in the "RNDIS uninitialized" state, + * either never activated or after rndis_uninit(). + * + * We don't want data to flow here until a nonzero packet + * filter is set, at which point it enters "RNDIS data + * initialized" state ... but we do want the endpoints + * to be activated. It's a strange little state. + * + * REVISIT the RNDIS gadget code has done this wrong for a + * very long time. We need another call to the link layer + * code -- gether_updown(...bool) maybe -- to do it right. + */ + rndis->port.cdc_filter = 0; + + DBG(cdev, "RNDIS RX/TX early activation ... \n"); + net = gether_connect(&rndis->port); + if (IS_ERR(net)) + return PTR_ERR(net); + + rndis_set_param_dev(rndis->config, net, + &rndis->port.cdc_filter); + } else + goto fail; + + return 0; +fail: + return -EINVAL; +} + +static void rndis_disable(struct usb_function *f) +{ + struct f_rndis *rndis = func_to_rndis(f); + struct usb_composite_dev *cdev = f->config->cdev; + + if (!rndis->notify->driver_data) + return; + + DBG(cdev, "rndis deactivated\n"); + + rndis_uninit(rndis->config); + gether_disconnect(&rndis->port); + + usb_ep_disable(rndis->notify); + rndis->notify->driver_data = NULL; +} + +/*-------------------------------------------------------------------------*/ + +/* + * This isn't quite the same mechanism as CDC Ethernet, since the + * notification scheme passes less data, but the same set of link + * states must be tested. A key difference is that altsettings are + * not used to tell whether the link should send packets or not. + */ + +static void rndis_open(struct gether *geth) +{ + struct f_rndis *rndis = func_to_rndis(&geth->func); + struct usb_composite_dev *cdev = geth->func.config->cdev; + + DBG(cdev, "%s\n", __func__); + + rndis_set_param_medium(rndis->config, RNDIS_MEDIUM_802_3, + bitrate(cdev->gadget) / 100); + rndis_signal_connect(rndis->config); +} + +static void rndis_close(struct gether *geth) +{ + struct f_rndis *rndis = func_to_rndis(&geth->func); + + DBG(geth->func.config->cdev, "%s\n", __func__); + + rndis_set_param_medium(rndis->config, RNDIS_MEDIUM_802_3, 0); + rndis_signal_disconnect(rndis->config); +} + +/*-------------------------------------------------------------------------*/ + +/* ethernet function driver setup/binding */ + +static int +rndis_bind(struct usb_configuration *c, struct usb_function *f) +{ + struct usb_composite_dev *cdev = c->cdev; + struct f_rndis *rndis = func_to_rndis(f); + int status; + struct usb_ep *ep; + + /* allocate instance-specific interface IDs */ + status = usb_interface_id(c, f); + if (status < 0) + goto fail; + rndis->ctrl_id = status; + rndis_iad_descriptor.bFirstInterface = status; + + rndis_control_intf.bInterfaceNumber = status; + rndis_union_desc.bMasterInterface0 = status; + + status = usb_interface_id(c, f); + if (status < 0) + goto fail; + rndis->data_id = status; + + rndis_data_intf.bInterfaceNumber = status; + rndis_union_desc.bSlaveInterface0 = status; + + status = -ENODEV; + + /* allocate instance-specific endpoints */ + ep = usb_ep_autoconfig(cdev->gadget, &fs_in_desc); + if (!ep) + goto fail; + rndis->port.in_ep = ep; + ep->driver_data = cdev; /* claim */ + + ep = usb_ep_autoconfig(cdev->gadget, &fs_out_desc); + if (!ep) + goto fail; + rndis->port.out_ep = ep; + ep->driver_data = cdev; /* claim */ + + /* NOTE: a status/notification endpoint is, strictly speaking, + * optional. We don't treat it that way though! It's simpler, + * and some newer profiles don't treat it as optional. + */ + ep = usb_ep_autoconfig(cdev->gadget, &fs_notify_desc); + if (!ep) + goto fail; + rndis->notify = ep; + ep->driver_data = cdev; /* claim */ + + status = -ENOMEM; + + /* allocate notification request and buffer */ + rndis->notify_req = usb_ep_alloc_request(ep, GFP_KERNEL); + if (!rndis->notify_req) + goto fail; + rndis->notify_req->buf = kmalloc(STATUS_BYTECOUNT, GFP_KERNEL); + if (!rndis->notify_req->buf) + goto fail; + rndis->notify_req->length = STATUS_BYTECOUNT; + rndis->notify_req->context = rndis; + rndis->notify_req->complete = rndis_response_complete; + + /* copy descriptors, and track endpoint copies */ + f->descriptors = usb_copy_descriptors(eth_fs_function); + if (!f->descriptors) + goto fail; + + /* support all relevant hardware speeds... we expect that when + * hardware is dual speed, all bulk-capable endpoints work at + * both speeds + */ + if (gadget_is_dualspeed(c->cdev->gadget)) { + hs_in_desc.bEndpointAddress = + fs_in_desc.bEndpointAddress; + hs_out_desc.bEndpointAddress = + fs_out_desc.bEndpointAddress; + hs_notify_desc.bEndpointAddress = + fs_notify_desc.bEndpointAddress; + + /* copy descriptors, and track endpoint copies */ + f->hs_descriptors = usb_copy_descriptors(eth_hs_function); + if (!f->hs_descriptors) + goto fail; + } + + if (gadget_is_superspeed(c->cdev->gadget)) { + ss_in_desc.bEndpointAddress = + fs_in_desc.bEndpointAddress; + ss_out_desc.bEndpointAddress = + fs_out_desc.bEndpointAddress; + ss_notify_desc.bEndpointAddress = + fs_notify_desc.bEndpointAddress; + + /* copy descriptors, and track endpoint copies */ + f->ss_descriptors = usb_copy_descriptors(eth_ss_function); + if (!f->ss_descriptors) + goto fail; + } + + rndis->port.open = rndis_open; + rndis->port.close = rndis_close; + + status = rndis_register(rndis_response_available, rndis); + if (status < 0) + goto fail; + rndis->config = status; + + rndis_set_param_medium(rndis->config, RNDIS_MEDIUM_802_3, 0); + rndis_set_host_mac(rndis->config, rndis->ethaddr); + + if (rndis->manufacturer && rndis->vendorID && + rndis_set_param_vendor(rndis->config, rndis->vendorID, + rndis->manufacturer)) + goto fail; + + /* NOTE: all that is done without knowing or caring about + * the network link ... which is unavailable to this code + * until we're activated via set_alt(). + */ + + DBG(cdev, "RNDIS: %s speed IN/%s OUT/%s NOTIFY/%s\n", + gadget_is_superspeed(c->cdev->gadget) ? "super" : + gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full", + rndis->port.in_ep->name, rndis->port.out_ep->name, + rndis->notify->name); + return 0; + +fail: + if (gadget_is_superspeed(c->cdev->gadget) && f->ss_descriptors) + usb_free_descriptors(f->ss_descriptors); + if (gadget_is_dualspeed(c->cdev->gadget) && f->hs_descriptors) + usb_free_descriptors(f->hs_descriptors); + if (f->descriptors) + usb_free_descriptors(f->descriptors); + + if (rndis->notify_req) { + kfree(rndis->notify_req->buf); + usb_ep_free_request(rndis->notify, rndis->notify_req); + } + + /* we might as well release our claims on endpoints */ + if (rndis->notify) + rndis->notify->driver_data = NULL; + if (rndis->port.out_ep->desc) + rndis->port.out_ep->driver_data = NULL; + if (rndis->port.in_ep->desc) + rndis->port.in_ep->driver_data = NULL; + + ERROR(cdev, "%s: can't bind, err %d\n", f->name, status); + + return status; +} + +static void +rndis_unbind(struct usb_configuration *c, struct usb_function *f) +{ + struct f_rndis *rndis = func_to_rndis(f); + + rndis_deregister(rndis->config); + rndis_exit(); + rndis_string_defs[0].id = 0; + + if (gadget_is_superspeed(c->cdev->gadget)) + usb_free_descriptors(f->ss_descriptors); + if (gadget_is_dualspeed(c->cdev->gadget)) + usb_free_descriptors(f->hs_descriptors); + usb_free_descriptors(f->descriptors); + + kfree(rndis->notify_req->buf); + usb_ep_free_request(rndis->notify, rndis->notify_req); + + kfree(rndis); +} + +/* Some controllers can't support RNDIS ... */ +static inline bool can_support_rndis(struct usb_configuration *c) +{ + /* everything else is *presumably* fine */ + return true; +} + +int +rndis_bind_config_vendor(struct usb_configuration *c, u8 ethaddr[ETH_ALEN], + u32 vendorID, const char *manufacturer) +{ + struct f_rndis *rndis; + int status; + + if (!can_support_rndis(c) || !ethaddr) + return -EINVAL; + + /* maybe allocate device-global string IDs */ + if (rndis_string_defs[0].id == 0) { + + /* ... and setup RNDIS itself */ + status = rndis_init(); + if (status < 0) + return status; + + /* control interface label */ + status = usb_string_id(c->cdev); + if (status < 0) + return status; + rndis_string_defs[0].id = status; + rndis_control_intf.iInterface = status; + + /* data interface label */ + status = usb_string_id(c->cdev); + if (status < 0) + return status; + rndis_string_defs[1].id = status; + rndis_data_intf.iInterface = status; + + /* IAD iFunction label */ + status = usb_string_id(c->cdev); + if (status < 0) + return status; + rndis_string_defs[2].id = status; + rndis_iad_descriptor.iFunction = status; + } + + /* allocate and initialize one new instance */ + status = -ENOMEM; + rndis = kzalloc(sizeof *rndis, GFP_KERNEL); + if (!rndis) + goto fail; + + memcpy(rndis->ethaddr, ethaddr, ETH_ALEN); + rndis->vendorID = vendorID; + rndis->manufacturer = manufacturer; + + /* RNDIS activates when the host changes this filter */ + rndis->port.cdc_filter = 0; + + /* RNDIS has special (and complex) framing */ + rndis->port.header_len = sizeof(struct rndis_packet_msg_type); + rndis->port.wrap = rndis_add_header; + rndis->port.unwrap = rndis_rm_hdr; + + rndis->port.func.name = "rndis"; + rndis->port.func.strings = rndis_strings; + /* descriptors are per-instance copies */ + rndis->port.func.bind = rndis_bind; + rndis->port.func.unbind = rndis_unbind; + rndis->port.func.set_alt = rndis_set_alt; + rndis->port.func.setup = rndis_setup; + rndis->port.func.disable = rndis_disable; + + status = usb_add_function(c, &rndis->port.func); + if (status) { + kfree(rndis); +fail: + rndis_exit(); + } + return status; +} diff --git a/drivers/staging/ccg/gadget_chips.h b/drivers/staging/ccg/gadget_chips.h new file mode 100644 index 000000000000..0ccca58e7a8f --- /dev/null +++ b/drivers/staging/ccg/gadget_chips.h @@ -0,0 +1,150 @@ +/* + * USB device controllers have lots of quirks. Use these macros in + * gadget drivers or other code that needs to deal with them, and which + * autoconfigures instead of using early binding to the hardware. + * + * This SHOULD eventually work like the ARM mach_is_*() stuff, driven by + * some config file that gets updated as new hardware is supported. + * (And avoiding all runtime comparisons in typical one-choice configs!) + * + * NOTE: some of these controller drivers may not be available yet. + * Some are available on 2.4 kernels; several are available, but not + * yet pushed in the 2.6 mainline tree. + */ + +#ifndef __GADGET_CHIPS_H +#define __GADGET_CHIPS_H + +/* + * NOTICE: the entries below are alphabetical and should be kept + * that way. + * + * Always be sure to add new entries to the correct position or + * accept the bashing later. + * + * If you have forgotten the alphabetical order let VIM/EMACS + * do that for you. + */ +#define gadget_is_amd5536udc(g) (!strcmp("amd5536udc", (g)->name)) +#define gadget_is_at91(g) (!strcmp("at91_udc", (g)->name)) +#define gadget_is_atmel_usba(g) (!strcmp("atmel_usba_udc", (g)->name)) +#define gadget_is_bcm63xx(g) (!strcmp("bcm63xx_udc", (g)->name)) +#define gadget_is_ci13xxx_msm(g) (!strcmp("ci13xxx_msm", (g)->name)) +#define gadget_is_ci13xxx_pci(g) (!strcmp("ci13xxx_pci", (g)->name)) +#define gadget_is_dummy(g) (!strcmp("dummy_udc", (g)->name)) +#define gadget_is_dwc3(g) (!strcmp("dwc3-gadget", (g)->name)) +#define gadget_is_fsl_qe(g) (!strcmp("fsl_qe_udc", (g)->name)) +#define gadget_is_fsl_usb2(g) (!strcmp("fsl-usb2-udc", (g)->name)) +#define gadget_is_goku(g) (!strcmp("goku_udc", (g)->name)) +#define gadget_is_imx(g) (!strcmp("imx_udc", (g)->name)) +#define gadget_is_langwell(g) (!strcmp("langwell_udc", (g)->name)) +#define gadget_is_lpc32xx(g) (!strcmp("lpc32xx_udc", (g)->name)) +#define gadget_is_m66592(g) (!strcmp("m66592_udc", (g)->name)) +#define gadget_is_musbhdrc(g) (!strcmp("musb-hdrc", (g)->name)) +#define gadget_is_net2272(g) (!strcmp("net2272", (g)->name)) +#define gadget_is_net2280(g) (!strcmp("net2280", (g)->name)) +#define gadget_is_omap(g) (!strcmp("omap_udc", (g)->name)) +#define gadget_is_pch(g) (!strcmp("pch_udc", (g)->name)) +#define gadget_is_pxa(g) (!strcmp("pxa25x_udc", (g)->name)) +#define gadget_is_pxa27x(g) (!strcmp("pxa27x_udc", (g)->name)) +#define gadget_is_r8a66597(g) (!strcmp("r8a66597_udc", (g)->name)) +#define gadget_is_renesas_usbhs(g) (!strcmp("renesas_usbhs_udc", (g)->name)) +#define gadget_is_s3c2410(g) (!strcmp("s3c2410_udc", (g)->name)) +#define gadget_is_s3c_hsotg(g) (!strcmp("s3c-hsotg", (g)->name)) +#define gadget_is_s3c_hsudc(g) (!strcmp("s3c-hsudc", (g)->name)) + +/** + * usb_gadget_controller_number - support bcdDevice id convention + * @gadget: the controller being driven + * + * Return a 2-digit BCD value associated with the peripheral controller, + * suitable for use as part of a bcdDevice value, or a negative error code. + * + * NOTE: this convention is purely optional, and has no meaning in terms of + * any USB specification. If you want to use a different convention in your + * gadget driver firmware -- maybe a more formal revision ID -- feel free. + * + * Hosts see these bcdDevice numbers, and are allowed (but not encouraged!) + * to change their behavior accordingly. For example it might help avoiding + * some chip bug. + */ +static inline int usb_gadget_controller_number(struct usb_gadget *gadget) +{ + if (gadget_is_net2280(gadget)) + return 0x01; + else if (gadget_is_dummy(gadget)) + return 0x02; + else if (gadget_is_pxa(gadget)) + return 0x03; + else if (gadget_is_goku(gadget)) + return 0x06; + else if (gadget_is_omap(gadget)) + return 0x08; + else if (gadget_is_pxa27x(gadget)) + return 0x11; + else if (gadget_is_s3c2410(gadget)) + return 0x12; + else if (gadget_is_at91(gadget)) + return 0x13; + else if (gadget_is_imx(gadget)) + return 0x14; + else if (gadget_is_musbhdrc(gadget)) + return 0x16; + else if (gadget_is_atmel_usba(gadget)) + return 0x18; + else if (gadget_is_fsl_usb2(gadget)) + return 0x19; + else if (gadget_is_amd5536udc(gadget)) + return 0x20; + else if (gadget_is_m66592(gadget)) + return 0x21; + else if (gadget_is_fsl_qe(gadget)) + return 0x22; + else if (gadget_is_ci13xxx_pci(gadget)) + return 0x23; + else if (gadget_is_langwell(gadget)) + return 0x24; + else if (gadget_is_r8a66597(gadget)) + return 0x25; + else if (gadget_is_s3c_hsotg(gadget)) + return 0x26; + else if (gadget_is_pch(gadget)) + return 0x27; + else if (gadget_is_ci13xxx_msm(gadget)) + return 0x28; + else if (gadget_is_renesas_usbhs(gadget)) + return 0x29; + else if (gadget_is_s3c_hsudc(gadget)) + return 0x30; + else if (gadget_is_net2272(gadget)) + return 0x31; + else if (gadget_is_dwc3(gadget)) + return 0x32; + else if (gadget_is_lpc32xx(gadget)) + return 0x33; + else if (gadget_is_bcm63xx(gadget)) + return 0x34; + + return -ENOENT; +} + + +/** + * gadget_supports_altsettings - return true if altsettings work + * @gadget: the gadget in question + */ +static inline bool gadget_supports_altsettings(struct usb_gadget *gadget) +{ + /* PXA 21x/25x/26x has no altsettings at all */ + if (gadget_is_pxa(gadget)) + return false; + + /* PXA 27x and 3xx have *broken* altsetting support */ + if (gadget_is_pxa27x(gadget)) + return false; + + /* Everything else is *presumably* fine ... */ + return true; +} + +#endif /* __GADGET_CHIPS_H */ diff --git a/drivers/staging/ccg/ndis.h b/drivers/staging/ccg/ndis.h new file mode 100644 index 000000000000..a19f72dec0cd --- /dev/null +++ b/drivers/staging/ccg/ndis.h @@ -0,0 +1,47 @@ +/* + * ndis.h + * + * ntddndis.h modified by Benedikt Spranger <b.spranger@pengutronix.de> + * + * Thanks to the cygwin development team, + * espacially to Casper S. Hornstrup <chorns@users.sourceforge.net> + * + * THIS SOFTWARE IS NOT COPYRIGHTED + * + * This source code is offered for use in the public domain. You may + * use, modify or distribute it freely. + */ + +#ifndef _LINUX_NDIS_H +#define _LINUX_NDIS_H + +enum NDIS_DEVICE_POWER_STATE { + NdisDeviceStateUnspecified = 0, + NdisDeviceStateD0, + NdisDeviceStateD1, + NdisDeviceStateD2, + NdisDeviceStateD3, + NdisDeviceStateMaximum +}; + +struct NDIS_PM_WAKE_UP_CAPABILITIES { + enum NDIS_DEVICE_POWER_STATE MinMagicPacketWakeUp; + enum NDIS_DEVICE_POWER_STATE MinPatternWakeUp; + enum NDIS_DEVICE_POWER_STATE MinLinkChangeWakeUp; +}; + +struct NDIS_PNP_CAPABILITIES { + __le32 Flags; + struct NDIS_PM_WAKE_UP_CAPABILITIES WakeUpCapabilities; +}; + +struct NDIS_PM_PACKET_PATTERN { + __le32 Priority; + __le32 Reserved; + __le32 MaskSize; + __le32 PatternOffset; + __le32 PatternSize; + __le32 PatternFlags; +}; + +#endif /* _LINUX_NDIS_H */ diff --git a/drivers/staging/ccg/rndis.c b/drivers/staging/ccg/rndis.c new file mode 100644 index 000000000000..e4192b887de9 --- /dev/null +++ b/drivers/staging/ccg/rndis.c @@ -0,0 +1,1175 @@ +/* + * RNDIS MSG parser + * + * Authors: Benedikt Spranger, Pengutronix + * Robert Schwebel, Pengutronix + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2, as published by the Free Software Foundation. + * + * This software was originally developed in conformance with + * Microsoft's Remote NDIS Specification License Agreement. + * + * 03/12/2004 Kai-Uwe Bloem <linux-development@auerswald.de> + * Fixed message length bug in init_response + * + * 03/25/2004 Kai-Uwe Bloem <linux-development@auerswald.de> + * Fixed rndis_rm_hdr length bug. + * + * Copyright (C) 2004 by David Brownell + * updates to merge with Linux 2.6, better match RNDIS spec + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/list.h> +#include <linux/proc_fs.h> +#include <linux/slab.h> +#include <linux/seq_file.h> +#include <linux/netdevice.h> + +#include <asm/io.h> +#include <asm/byteorder.h> +#include <asm/unaligned.h> + + +#undef VERBOSE_DEBUG + +#include "rndis.h" + + +/* The driver for your USB chip needs to support ep0 OUT to work with + * RNDIS, plus all three CDC Ethernet endpoints (interrupt not optional). + * + * Windows hosts need an INF file like Documentation/usb/linux.inf + * and will be happier if you provide the host_addr module parameter. + */ + +#if 0 +static int rndis_debug = 0; +module_param (rndis_debug, int, 0); +MODULE_PARM_DESC (rndis_debug, "enable debugging"); +#else +#define rndis_debug 0 +#endif + +#define RNDIS_MAX_CONFIGS 1 + + +static rndis_params rndis_per_dev_params[RNDIS_MAX_CONFIGS]; + +/* Driver Version */ +static const __le32 rndis_driver_version = cpu_to_le32(1); + +/* Function Prototypes */ +static rndis_resp_t *rndis_add_response(int configNr, u32 length); + + +/* supported OIDs */ +static const u32 oid_supported_list[] = +{ + /* the general stuff */ + RNDIS_OID_GEN_SUPPORTED_LIST, + RNDIS_OID_GEN_HARDWARE_STATUS, + RNDIS_OID_GEN_MEDIA_SUPPORTED, + RNDIS_OID_GEN_MEDIA_IN_USE, + RNDIS_OID_GEN_MAXIMUM_FRAME_SIZE, + RNDIS_OID_GEN_LINK_SPEED, + RNDIS_OID_GEN_TRANSMIT_BLOCK_SIZE, + RNDIS_OID_GEN_RECEIVE_BLOCK_SIZE, + RNDIS_OID_GEN_VENDOR_ID, + RNDIS_OID_GEN_VENDOR_DESCRIPTION, + RNDIS_OID_GEN_VENDOR_DRIVER_VERSION, + RNDIS_OID_GEN_CURRENT_PACKET_FILTER, + RNDIS_OID_GEN_MAXIMUM_TOTAL_SIZE, + RNDIS_OID_GEN_MEDIA_CONNECT_STATUS, + RNDIS_OID_GEN_PHYSICAL_MEDIUM, + + /* the statistical stuff */ + RNDIS_OID_GEN_XMIT_OK, + RNDIS_OID_GEN_RCV_OK, + RNDIS_OID_GEN_XMIT_ERROR, + RNDIS_OID_GEN_RCV_ERROR, + RNDIS_OID_GEN_RCV_NO_BUFFER, +#ifdef RNDIS_OPTIONAL_STATS + RNDIS_OID_GEN_DIRECTED_BYTES_XMIT, + RNDIS_OID_GEN_DIRECTED_FRAMES_XMIT, + RNDIS_OID_GEN_MULTICAST_BYTES_XMIT, + RNDIS_OID_GEN_MULTICAST_FRAMES_XMIT, + RNDIS_OID_GEN_BROADCAST_BYTES_XMIT, + RNDIS_OID_GEN_BROADCAST_FRAMES_XMIT, + RNDIS_OID_GEN_DIRECTED_BYTES_RCV, + RNDIS_OID_GEN_DIRECTED_FRAMES_RCV, + RNDIS_OID_GEN_MULTICAST_BYTES_RCV, + RNDIS_OID_GEN_MULTICAST_FRAMES_RCV, + RNDIS_OID_GEN_BROADCAST_BYTES_RCV, + RNDIS_OID_GEN_BROADCAST_FRAMES_RCV, + RNDIS_OID_GEN_RCV_CRC_ERROR, + RNDIS_OID_GEN_TRANSMIT_QUEUE_LENGTH, +#endif /* RNDIS_OPTIONAL_STATS */ + + /* mandatory 802.3 */ + /* the general stuff */ + RNDIS_OID_802_3_PERMANENT_ADDRESS, + RNDIS_OID_802_3_CURRENT_ADDRESS, + RNDIS_OID_802_3_MULTICAST_LIST, + RNDIS_OID_802_3_MAC_OPTIONS, + RNDIS_OID_802_3_MAXIMUM_LIST_SIZE, + + /* the statistical stuff */ + RNDIS_OID_802_3_RCV_ERROR_ALIGNMENT, + RNDIS_OID_802_3_XMIT_ONE_COLLISION, + RNDIS_OID_802_3_XMIT_MORE_COLLISIONS, +#ifdef RNDIS_OPTIONAL_STATS + RNDIS_OID_802_3_XMIT_DEFERRED, + RNDIS_OID_802_3_XMIT_MAX_COLLISIONS, + RNDIS_OID_802_3_RCV_OVERRUN, + RNDIS_OID_802_3_XMIT_UNDERRUN, + RNDIS_OID_802_3_XMIT_HEARTBEAT_FAILURE, + RNDIS_OID_802_3_XMIT_TIMES_CRS_LOST, + RNDIS_OID_802_3_XMIT_LATE_COLLISIONS, +#endif /* RNDIS_OPTIONAL_STATS */ + +#ifdef RNDIS_PM + /* PM and wakeup are "mandatory" for USB, but the RNDIS specs + * don't say what they mean ... and the NDIS specs are often + * confusing and/or ambiguous in this context. (That is, more + * so than their specs for the other OIDs.) + * + * FIXME someone who knows what these should do, please + * implement them! + */ + + /* power management */ + OID_PNP_CAPABILITIES, + OID_PNP_QUERY_POWER, + OID_PNP_SET_POWER, + +#ifdef RNDIS_WAKEUP + /* wake up host */ + OID_PNP_ENABLE_WAKE_UP, + OID_PNP_ADD_WAKE_UP_PATTERN, + OID_PNP_REMOVE_WAKE_UP_PATTERN, +#endif /* RNDIS_WAKEUP */ +#endif /* RNDIS_PM */ +}; + + +/* NDIS Functions */ +static int gen_ndis_query_resp(int configNr, u32 OID, u8 *buf, + unsigned buf_len, rndis_resp_t *r) +{ + int retval = -ENOTSUPP; + u32 length = 4; /* usually */ + __le32 *outbuf; + int i, count; + rndis_query_cmplt_type *resp; + struct net_device *net; + struct rtnl_link_stats64 temp; + const struct rtnl_link_stats64 *stats; + + if (!r) return -ENOMEM; + resp = (rndis_query_cmplt_type *)r->buf; + + if (!resp) return -ENOMEM; + + if (buf_len && rndis_debug > 1) { + pr_debug("query OID %08x value, len %d:\n", OID, buf_len); + for (i = 0; i < buf_len; i += 16) { + pr_debug("%03d: %08x %08x %08x %08x\n", i, + get_unaligned_le32(&buf[i]), + get_unaligned_le32(&buf[i + 4]), + get_unaligned_le32(&buf[i + 8]), + get_unaligned_le32(&buf[i + 12])); + } + } + + /* response goes here, right after the header */ + outbuf = (__le32 *)&resp[1]; + resp->InformationBufferOffset = cpu_to_le32(16); + + net = rndis_per_dev_params[configNr].dev; + stats = dev_get_stats(net, &temp); + + switch (OID) { + + /* general oids (table 4-1) */ + + /* mandatory */ + case RNDIS_OID_GEN_SUPPORTED_LIST: + pr_debug("%s: RNDIS_OID_GEN_SUPPORTED_LIST\n", __func__); + length = sizeof(oid_supported_list); + count = length / sizeof(u32); + for (i = 0; i < count; i++) + outbuf[i] = cpu_to_le32(oid_supported_list[i]); + retval = 0; + break; + + /* mandatory */ + case RNDIS_OID_GEN_HARDWARE_STATUS: + pr_debug("%s: RNDIS_OID_GEN_HARDWARE_STATUS\n", __func__); + /* Bogus question! + * Hardware must be ready to receive high level protocols. + * BTW: + * reddite ergo quae sunt Caesaris Caesari + * et quae sunt Dei Deo! + */ + *outbuf = cpu_to_le32(0); + retval = 0; + break; + + /* mandatory */ + case RNDIS_OID_GEN_MEDIA_SUPPORTED: + pr_debug("%s: RNDIS_OID_GEN_MEDIA_SUPPORTED\n", __func__); + *outbuf = cpu_to_le32(rndis_per_dev_params[configNr].medium); + retval = 0; + break; + + /* mandatory */ + case RNDIS_OID_GEN_MEDIA_IN_USE: + pr_debug("%s: RNDIS_OID_GEN_MEDIA_IN_USE\n", __func__); + /* one medium, one transport... (maybe you do it better) */ + *outbuf = cpu_to_le32(rndis_per_dev_params[configNr].medium); + retval = 0; + break; + + /* mandatory */ + case RNDIS_OID_GEN_MAXIMUM_FRAME_SIZE: + pr_debug("%s: RNDIS_OID_GEN_MAXIMUM_FRAME_SIZE\n", __func__); + if (rndis_per_dev_params[configNr].dev) { + *outbuf = cpu_to_le32( + rndis_per_dev_params[configNr].dev->mtu); + retval = 0; + } + break; + + /* mandatory */ + case RNDIS_OID_GEN_LINK_SPEED: + if (rndis_debug > 1) + pr_debug("%s: RNDIS_OID_GEN_LINK_SPEED\n", __func__); + if (rndis_per_dev_params[configNr].media_state + == RNDIS_MEDIA_STATE_DISCONNECTED) + *outbuf = cpu_to_le32(0); + else + *outbuf = cpu_to_le32( + rndis_per_dev_params[configNr].speed); + retval = 0; + break; + + /* mandatory */ + case RNDIS_OID_GEN_TRANSMIT_BLOCK_SIZE: + pr_debug("%s: RNDIS_OID_GEN_TRANSMIT_BLOCK_SIZE\n", __func__); + if (rndis_per_dev_params[configNr].dev) { + *outbuf = cpu_to_le32( + rndis_per_dev_params[configNr].dev->mtu); + retval = 0; + } + break; + + /* mandatory */ + case RNDIS_OID_GEN_RECEIVE_BLOCK_SIZE: + pr_debug("%s: RNDIS_OID_GEN_RECEIVE_BLOCK_SIZE\n", __func__); + if (rndis_per_dev_params[configNr].dev) { + *outbuf = cpu_to_le32( + rndis_per_dev_params[configNr].dev->mtu); + retval = 0; + } + break; + + /* mandatory */ + case RNDIS_OID_GEN_VENDOR_ID: + pr_debug("%s: RNDIS_OID_GEN_VENDOR_ID\n", __func__); + *outbuf = cpu_to_le32( + rndis_per_dev_params[configNr].vendorID); + retval = 0; + break; + + /* mandatory */ + case RNDIS_OID_GEN_VENDOR_DESCRIPTION: + pr_debug("%s: RNDIS_OID_GEN_VENDOR_DESCRIPTION\n", __func__); + if (rndis_per_dev_params[configNr].vendorDescr) { + length = strlen(rndis_per_dev_params[configNr]. + vendorDescr); + memcpy(outbuf, + rndis_per_dev_params[configNr].vendorDescr, + length); + } else { + outbuf[0] = 0; + } + retval = 0; + break; + + case RNDIS_OID_GEN_VENDOR_DRIVER_VERSION: + pr_debug("%s: RNDIS_OID_GEN_VENDOR_DRIVER_VERSION\n", __func__); + /* Created as LE */ + *outbuf = rndis_driver_version; + retval = 0; + break; + + /* mandatory */ + case RNDIS_OID_GEN_CURRENT_PACKET_FILTER: + pr_debug("%s: RNDIS_OID_GEN_CURRENT_PACKET_FILTER\n", __func__); + *outbuf = cpu_to_le32(*rndis_per_dev_params[configNr].filter); + retval = 0; + break; + + /* mandatory */ + case RNDIS_OID_GEN_MAXIMUM_TOTAL_SIZE: + pr_debug("%s: RNDIS_OID_GEN_MAXIMUM_TOTAL_SIZE\n", __func__); + *outbuf = cpu_to_le32(RNDIS_MAX_TOTAL_SIZE); + retval = 0; + break; + + /* mandatory */ + case RNDIS_OID_GEN_MEDIA_CONNECT_STATUS: + if (rndis_debug > 1) + pr_debug("%s: RNDIS_OID_GEN_MEDIA_CONNECT_STATUS\n", __func__); + *outbuf = cpu_to_le32(rndis_per_dev_params[configNr] + .media_state); + retval = 0; + break; + + case RNDIS_OID_GEN_PHYSICAL_MEDIUM: + pr_debug("%s: RNDIS_OID_GEN_PHYSICAL_MEDIUM\n", __func__); + *outbuf = cpu_to_le32(0); + retval = 0; + break; + + /* The RNDIS specification is incomplete/wrong. Some versions + * of MS-Windows expect OIDs that aren't specified there. Other + * versions emit undefined RNDIS messages. DOCUMENT ALL THESE! + */ + case RNDIS_OID_GEN_MAC_OPTIONS: /* from WinME */ + pr_debug("%s: RNDIS_OID_GEN_MAC_OPTIONS\n", __func__); + *outbuf = cpu_to_le32( + RNDIS_MAC_OPTION_RECEIVE_SERIALIZED + | RNDIS_MAC_OPTION_FULL_DUPLEX); + retval = 0; + break; + + /* statistics OIDs (table 4-2) */ + + /* mandatory */ + case RNDIS_OID_GEN_XMIT_OK: + if (rndis_debug > 1) + pr_debug("%s: RNDIS_OID_GEN_XMIT_OK\n", __func__); + if (stats) { + *outbuf = cpu_to_le32(stats->tx_packets + - stats->tx_errors - stats->tx_dropped); + retval = 0; + } + break; + + /* mandatory */ + case RNDIS_OID_GEN_RCV_OK: + if (rndis_debug > 1) + pr_debug("%s: RNDIS_OID_GEN_RCV_OK\n", __func__); + if (stats) { + *outbuf = cpu_to_le32(stats->rx_packets + - stats->rx_errors - stats->rx_dropped); + retval = 0; + } + break; + + /* mandatory */ + case RNDIS_OID_GEN_XMIT_ERROR: + if (rndis_debug > 1) + pr_debug("%s: RNDIS_OID_GEN_XMIT_ERROR\n", __func__); + if (stats) { + *outbuf = cpu_to_le32(stats->tx_errors); + retval = 0; + } + break; + + /* mandatory */ + case RNDIS_OID_GEN_RCV_ERROR: + if (rndis_debug > 1) + pr_debug("%s: RNDIS_OID_GEN_RCV_ERROR\n", __func__); + if (stats) { + *outbuf = cpu_to_le32(stats->rx_errors); + retval = 0; + } + break; + + /* mandatory */ + case RNDIS_OID_GEN_RCV_NO_BUFFER: + pr_debug("%s: RNDIS_OID_GEN_RCV_NO_BUFFER\n", __func__); + if (stats) { + *outbuf = cpu_to_le32(stats->rx_dropped); + retval = 0; + } + break; + + /* ieee802.3 OIDs (table 4-3) */ + + /* mandatory */ + case RNDIS_OID_802_3_PERMANENT_ADDRESS: + pr_debug("%s: RNDIS_OID_802_3_PERMANENT_ADDRESS\n", __func__); + if (rndis_per_dev_params[configNr].dev) { + length = ETH_ALEN; + memcpy(outbuf, + rndis_per_dev_params[configNr].host_mac, + length); + retval = 0; + } + break; + + /* mandatory */ + case RNDIS_OID_802_3_CURRENT_ADDRESS: + pr_debug("%s: RNDIS_OID_802_3_CURRENT_ADDRESS\n", __func__); + if (rndis_per_dev_params[configNr].dev) { + length = ETH_ALEN; + memcpy(outbuf, + rndis_per_dev_params [configNr].host_mac, + length); + retval = 0; + } + break; + + /* mandatory */ + case RNDIS_OID_802_3_MULTICAST_LIST: + pr_debug("%s: RNDIS_OID_802_3_MULTICAST_LIST\n", __func__); + /* Multicast base address only */ + *outbuf = cpu_to_le32(0xE0000000); + retval = 0; + break; + + /* mandatory */ + case RNDIS_OID_802_3_MAXIMUM_LIST_SIZE: + pr_debug("%s: RNDIS_OID_802_3_MAXIMUM_LIST_SIZE\n", __func__); + /* Multicast base address only */ + *outbuf = cpu_to_le32(1); + retval = 0; + break; + + case RNDIS_OID_802_3_MAC_OPTIONS: + pr_debug("%s: RNDIS_OID_802_3_MAC_OPTIONS\n", __func__); + *outbuf = cpu_to_le32(0); + retval = 0; + break; + + /* ieee802.3 statistics OIDs (table 4-4) */ + + /* mandatory */ + case RNDIS_OID_802_3_RCV_ERROR_ALIGNMENT: + pr_debug("%s: RNDIS_OID_802_3_RCV_ERROR_ALIGNMENT\n", __func__); + if (stats) { + *outbuf = cpu_to_le32(stats->rx_frame_errors); + retval = 0; + } + break; + + /* mandatory */ + case RNDIS_OID_802_3_XMIT_ONE_COLLISION: + pr_debug("%s: RNDIS_OID_802_3_XMIT_ONE_COLLISION\n", __func__); + *outbuf = cpu_to_le32(0); + retval = 0; + break; + + /* mandatory */ + case RNDIS_OID_802_3_XMIT_MORE_COLLISIONS: + pr_debug("%s: RNDIS_OID_802_3_XMIT_MORE_COLLISIONS\n", __func__); + *outbuf = cpu_to_le32(0); + retval = 0; + break; + + default: + pr_warning("%s: query unknown OID 0x%08X\n", + __func__, OID); + } + if (retval < 0) + length = 0; + + resp->InformationBufferLength = cpu_to_le32(length); + r->length = length + sizeof(*resp); + resp->MessageLength = cpu_to_le32(r->length); + return retval; +} + +static int gen_ndis_set_resp(u8 configNr, u32 OID, u8 *buf, u32 buf_len, + rndis_resp_t *r) +{ + rndis_set_cmplt_type *resp; + int i, retval = -ENOTSUPP; + struct rndis_params *params; + + if (!r) + return -ENOMEM; + resp = (rndis_set_cmplt_type *)r->buf; + if (!resp) + return -ENOMEM; + + if (buf_len && rndis_debug > 1) { + pr_debug("set OID %08x value, len %d:\n", OID, buf_len); + for (i = 0; i < buf_len; i += 16) { + pr_debug("%03d: %08x %08x %08x %08x\n", i, + get_unaligned_le32(&buf[i]), + get_unaligned_le32(&buf[i + 4]), + get_unaligned_le32(&buf[i + 8]), + get_unaligned_le32(&buf[i + 12])); + } + } + + params = &rndis_per_dev_params[configNr]; + switch (OID) { + case RNDIS_OID_GEN_CURRENT_PACKET_FILTER: + + /* these NDIS_PACKET_TYPE_* bitflags are shared with + * cdc_filter; it's not RNDIS-specific + * NDIS_PACKET_TYPE_x == USB_CDC_PACKET_TYPE_x for x in: + * PROMISCUOUS, DIRECTED, + * MULTICAST, ALL_MULTICAST, BROADCAST + */ + *params->filter = (u16)get_unaligned_le32(buf); + pr_debug("%s: RNDIS_OID_GEN_CURRENT_PACKET_FILTER %08x\n", + __func__, *params->filter); + + /* this call has a significant side effect: it's + * what makes the packet flow start and stop, like + * activating the CDC Ethernet altsetting. + */ + retval = 0; + if (*params->filter) { + params->state = RNDIS_DATA_INITIALIZED; + netif_carrier_on(params->dev); + if (netif_running(params->dev)) + netif_wake_queue(params->dev); + } else { + params->state = RNDIS_INITIALIZED; + netif_carrier_off(params->dev); + netif_stop_queue(params->dev); + } + break; + + case RNDIS_OID_802_3_MULTICAST_LIST: + /* I think we can ignore this */ + pr_debug("%s: RNDIS_OID_802_3_MULTICAST_LIST\n", __func__); + retval = 0; + break; + + default: + pr_warning("%s: set unknown OID 0x%08X, size %d\n", + __func__, OID, buf_len); + } + + return retval; +} + +/* + * Response Functions + */ + +static int rndis_init_response(int configNr, rndis_init_msg_type *buf) +{ + rndis_init_cmplt_type *resp; + rndis_resp_t *r; + struct rndis_params *params = rndis_per_dev_params + configNr; + + if (!params->dev) + return -ENOTSUPP; + + r = rndis_add_response(configNr, sizeof(rndis_init_cmplt_type)); + if (!r) + return -ENOMEM; + resp = (rndis_init_cmplt_type *)r->buf; + + resp->MessageType = cpu_to_le32(RNDIS_MSG_INIT_C); + resp->MessageLength = cpu_to_le32(52); + resp->RequestID = buf->RequestID; /* Still LE in msg buffer */ + resp->Status = cpu_to_le32(RNDIS_STATUS_SUCCESS); + resp->MajorVersion = cpu_to_le32(RNDIS_MAJOR_VERSION); + resp->MinorVersion = cpu_to_le32(RNDIS_MINOR_VERSION); + resp->DeviceFlags = cpu_to_le32(RNDIS_DF_CONNECTIONLESS); + resp->Medium = cpu_to_le32(RNDIS_MEDIUM_802_3); + resp->MaxPacketsPerTransfer = cpu_to_le32(1); + resp->MaxTransferSize = cpu_to_le32( + params->dev->mtu + + sizeof(struct ethhdr) + + sizeof(struct rndis_packet_msg_type) + + 22); + resp->PacketAlignmentFactor = cpu_to_le32(0); + resp->AFListOffset = cpu_to_le32(0); + resp->AFListSize = cpu_to_le32(0); + + params->resp_avail(params->v); + return 0; +} + +static int rndis_query_response(int configNr, rndis_query_msg_type *buf) +{ + rndis_query_cmplt_type *resp; + rndis_resp_t *r; + struct rndis_params *params = rndis_per_dev_params + configNr; + + /* pr_debug("%s: OID = %08X\n", __func__, cpu_to_le32(buf->OID)); */ + if (!params->dev) + return -ENOTSUPP; + + /* + * we need more memory: + * gen_ndis_query_resp expects enough space for + * rndis_query_cmplt_type followed by data. + * oid_supported_list is the largest data reply + */ + r = rndis_add_response(configNr, + sizeof(oid_supported_list) + sizeof(rndis_query_cmplt_type)); + if (!r) + return -ENOMEM; + resp = (rndis_query_cmplt_type *)r->buf; + + resp->MessageType = cpu_to_le32(RNDIS_MSG_QUERY_C); + resp->RequestID = buf->RequestID; /* Still LE in msg buffer */ + + if (gen_ndis_query_resp(configNr, le32_to_cpu(buf->OID), + le32_to_cpu(buf->InformationBufferOffset) + + 8 + (u8 *)buf, + le32_to_cpu(buf->InformationBufferLength), + r)) { + /* OID not supported */ + resp->Status = cpu_to_le32(RNDIS_STATUS_NOT_SUPPORTED); + resp->MessageLength = cpu_to_le32(sizeof *resp); + resp->InformationBufferLength = cpu_to_le32(0); + resp->InformationBufferOffset = cpu_to_le32(0); + } else + resp->Status = cpu_to_le32(RNDIS_STATUS_SUCCESS); + + params->resp_avail(params->v); + return 0; +} + +static int rndis_set_response(int configNr, rndis_set_msg_type *buf) +{ + u32 BufLength, BufOffset; + rndis_set_cmplt_type *resp; + rndis_resp_t *r; + struct rndis_params *params = rndis_per_dev_params + configNr; + + r = rndis_add_response(configNr, sizeof(rndis_set_cmplt_type)); + if (!r) + return -ENOMEM; + resp = (rndis_set_cmplt_type *)r->buf; + + BufLength = le32_to_cpu(buf->InformationBufferLength); + BufOffset = le32_to_cpu(buf->InformationBufferOffset); + +#ifdef VERBOSE_DEBUG + pr_debug("%s: Length: %d\n", __func__, BufLength); + pr_debug("%s: Offset: %d\n", __func__, BufOffset); + pr_debug("%s: InfoBuffer: ", __func__); + + for (i = 0; i < BufLength; i++) { + pr_debug("%02x ", *(((u8 *) buf) + i + 8 + BufOffset)); + } + + pr_debug("\n"); +#endif + + resp->MessageType = cpu_to_le32(RNDIS_MSG_SET_C); + resp->MessageLength = cpu_to_le32(16); + resp->RequestID = buf->RequestID; /* Still LE in msg buffer */ + if (gen_ndis_set_resp(configNr, le32_to_cpu(buf->OID), + ((u8 *)buf) + 8 + BufOffset, BufLength, r)) + resp->Status = cpu_to_le32(RNDIS_STATUS_NOT_SUPPORTED); + else + resp->Status = cpu_to_le32(RNDIS_STATUS_SUCCESS); + + params->resp_avail(params->v); + return 0; +} + +static int rndis_reset_response(int configNr, rndis_reset_msg_type *buf) +{ + rndis_reset_cmplt_type *resp; + rndis_resp_t *r; + struct rndis_params *params = rndis_per_dev_params + configNr; + + r = rndis_add_response(configNr, sizeof(rndis_reset_cmplt_type)); + if (!r) + return -ENOMEM; + resp = (rndis_reset_cmplt_type *)r->buf; + + resp->MessageType = cpu_to_le32(RNDIS_MSG_RESET_C); + resp->MessageLength = cpu_to_le32(16); + resp->Status = cpu_to_le32(RNDIS_STATUS_SUCCESS); + /* resent information */ + resp->AddressingReset = cpu_to_le32(1); + + params->resp_avail(params->v); + return 0; +} + +static int rndis_keepalive_response(int configNr, + rndis_keepalive_msg_type *buf) +{ + rndis_keepalive_cmplt_type *resp; + rndis_resp_t *r; + struct rndis_params *params = rndis_per_dev_params + configNr; + + /* host "should" check only in RNDIS_DATA_INITIALIZED state */ + + r = rndis_add_response(configNr, sizeof(rndis_keepalive_cmplt_type)); + if (!r) + return -ENOMEM; + resp = (rndis_keepalive_cmplt_type *)r->buf; + + resp->MessageType = cpu_to_le32(RNDIS_MSG_KEEPALIVE_C); + resp->MessageLength = cpu_to_le32(16); + resp->RequestID = buf->RequestID; /* Still LE in msg buffer */ + resp->Status = cpu_to_le32(RNDIS_STATUS_SUCCESS); + + params->resp_avail(params->v); + return 0; +} + + +/* + * Device to Host Comunication + */ +static int rndis_indicate_status_msg(int configNr, u32 status) +{ + rndis_indicate_status_msg_type *resp; + rndis_resp_t *r; + struct rndis_params *params = rndis_per_dev_params + configNr; + + if (params->state == RNDIS_UNINITIALIZED) + return -ENOTSUPP; + + r = rndis_add_response(configNr, + sizeof(rndis_indicate_status_msg_type)); + if (!r) + return -ENOMEM; + resp = (rndis_indicate_status_msg_type *)r->buf; + + resp->MessageType = cpu_to_le32(RNDIS_MSG_INDICATE); + resp->MessageLength = cpu_to_le32(20); + resp->Status = cpu_to_le32(status); + resp->StatusBufferLength = cpu_to_le32(0); + resp->StatusBufferOffset = cpu_to_le32(0); + + params->resp_avail(params->v); + return 0; +} + +int rndis_signal_connect(int configNr) +{ + rndis_per_dev_params[configNr].media_state + = RNDIS_MEDIA_STATE_CONNECTED; + return rndis_indicate_status_msg(configNr, + RNDIS_STATUS_MEDIA_CONNECT); +} + +int rndis_signal_disconnect(int configNr) +{ + rndis_per_dev_params[configNr].media_state + = RNDIS_MEDIA_STATE_DISCONNECTED; + return rndis_indicate_status_msg(configNr, + RNDIS_STATUS_MEDIA_DISCONNECT); +} + +void rndis_uninit(int configNr) +{ + u8 *buf; + u32 length; + + if (configNr >= RNDIS_MAX_CONFIGS) + return; + rndis_per_dev_params[configNr].state = RNDIS_UNINITIALIZED; + + /* drain the response queue */ + while ((buf = rndis_get_next_response(configNr, &length))) + rndis_free_response(configNr, buf); +} + +void rndis_set_host_mac(int configNr, const u8 *addr) +{ + rndis_per_dev_params[configNr].host_mac = addr; +} + +/* + * Message Parser + */ +int rndis_msg_parser(u8 configNr, u8 *buf) +{ + u32 MsgType, MsgLength; + __le32 *tmp; + struct rndis_params *params; + + if (!buf) + return -ENOMEM; + + tmp = (__le32 *)buf; + MsgType = get_unaligned_le32(tmp++); + MsgLength = get_unaligned_le32(tmp++); + + if (configNr >= RNDIS_MAX_CONFIGS) + return -ENOTSUPP; + params = &rndis_per_dev_params[configNr]; + + /* NOTE: RNDIS is *EXTREMELY* chatty ... Windows constantly polls for + * rx/tx statistics and link status, in addition to KEEPALIVE traffic + * and normal HC level polling to see if there's any IN traffic. + */ + + /* For USB: responses may take up to 10 seconds */ + switch (MsgType) { + case RNDIS_MSG_INIT: + pr_debug("%s: RNDIS_MSG_INIT\n", + __func__); + params->state = RNDIS_INITIALIZED; + return rndis_init_response(configNr, + (rndis_init_msg_type *)buf); + + case RNDIS_MSG_HALT: + pr_debug("%s: RNDIS_MSG_HALT\n", + __func__); + params->state = RNDIS_UNINITIALIZED; + if (params->dev) { + netif_carrier_off(params->dev); + netif_stop_queue(params->dev); + } + return 0; + + case RNDIS_MSG_QUERY: + return rndis_query_response(configNr, + (rndis_query_msg_type *)buf); + + case RNDIS_MSG_SET: + return rndis_set_response(configNr, + (rndis_set_msg_type *)buf); + + case RNDIS_MSG_RESET: + pr_debug("%s: RNDIS_MSG_RESET\n", + __func__); + return rndis_reset_response(configNr, + (rndis_reset_msg_type *)buf); + + case RNDIS_MSG_KEEPALIVE: + /* For USB: host does this every 5 seconds */ + if (rndis_debug > 1) + pr_debug("%s: RNDIS_MSG_KEEPALIVE\n", + __func__); + return rndis_keepalive_response(configNr, + (rndis_keepalive_msg_type *) + buf); + + default: + /* At least Windows XP emits some undefined RNDIS messages. + * In one case those messages seemed to relate to the host + * suspending itself. + */ + pr_warning("%s: unknown RNDIS message 0x%08X len %d\n", + __func__, MsgType, MsgLength); + print_hex_dump_bytes(__func__, DUMP_PREFIX_OFFSET, + buf, MsgLength); + break; + } + + return -ENOTSUPP; +} + +int rndis_register(void (*resp_avail)(void *v), void *v) +{ + u8 i; + + if (!resp_avail) + return -EINVAL; + + for (i = 0; i < RNDIS_MAX_CONFIGS; i++) { + if (!rndis_per_dev_params[i].used) { + rndis_per_dev_params[i].used = 1; + rndis_per_dev_params[i].resp_avail = resp_avail; + rndis_per_dev_params[i].v = v; + pr_debug("%s: configNr = %d\n", __func__, i); + return i; + } + } + pr_debug("failed\n"); + + return -ENODEV; +} + +void rndis_deregister(int configNr) +{ + pr_debug("%s:\n", __func__); + + if (configNr >= RNDIS_MAX_CONFIGS) return; + rndis_per_dev_params[configNr].used = 0; +} + +int rndis_set_param_dev(u8 configNr, struct net_device *dev, u16 *cdc_filter) +{ + pr_debug("%s:\n", __func__); + if (!dev) + return -EINVAL; + if (configNr >= RNDIS_MAX_CONFIGS) return -1; + + rndis_per_dev_params[configNr].dev = dev; + rndis_per_dev_params[configNr].filter = cdc_filter; + + return 0; +} + +int rndis_set_param_vendor(u8 configNr, u32 vendorID, const char *vendorDescr) +{ + pr_debug("%s:\n", __func__); + if (!vendorDescr) return -1; + if (configNr >= RNDIS_MAX_CONFIGS) return -1; + + rndis_per_dev_params[configNr].vendorID = vendorID; + rndis_per_dev_params[configNr].vendorDescr = vendorDescr; + + return 0; +} + +int rndis_set_param_medium(u8 configNr, u32 medium, u32 speed) +{ + pr_debug("%s: %u %u\n", __func__, medium, speed); + if (configNr >= RNDIS_MAX_CONFIGS) return -1; + + rndis_per_dev_params[configNr].medium = medium; + rndis_per_dev_params[configNr].speed = speed; + + return 0; +} + +void rndis_add_hdr(struct sk_buff *skb) +{ + struct rndis_packet_msg_type *header; + + if (!skb) + return; + header = (void *)skb_push(skb, sizeof(*header)); + memset(header, 0, sizeof *header); + header->MessageType = cpu_to_le32(RNDIS_MSG_PACKET); + header->MessageLength = cpu_to_le32(skb->len); + header->DataOffset = cpu_to_le32(36); + header->DataLength = cpu_to_le32(skb->len - sizeof(*header)); +} + +void rndis_free_response(int configNr, u8 *buf) +{ + rndis_resp_t *r; + struct list_head *act, *tmp; + + list_for_each_safe(act, tmp, + &(rndis_per_dev_params[configNr].resp_queue)) + { + r = list_entry(act, rndis_resp_t, list); + if (r && r->buf == buf) { + list_del(&r->list); + kfree(r); + } + } +} + +u8 *rndis_get_next_response(int configNr, u32 *length) +{ + rndis_resp_t *r; + struct list_head *act, *tmp; + + if (!length) return NULL; + + list_for_each_safe(act, tmp, + &(rndis_per_dev_params[configNr].resp_queue)) + { + r = list_entry(act, rndis_resp_t, list); + if (!r->send) { + r->send = 1; + *length = r->length; + return r->buf; + } + } + + return NULL; +} + +static rndis_resp_t *rndis_add_response(int configNr, u32 length) +{ + rndis_resp_t *r; + + /* NOTE: this gets copied into ether.c USB_BUFSIZ bytes ... */ + r = kmalloc(sizeof(rndis_resp_t) + length, GFP_ATOMIC); + if (!r) return NULL; + + r->buf = (u8 *)(r + 1); + r->length = length; + r->send = 0; + + list_add_tail(&r->list, + &(rndis_per_dev_params[configNr].resp_queue)); + return r; +} + +int rndis_rm_hdr(struct gether *port, + struct sk_buff *skb, + struct sk_buff_head *list) +{ + /* tmp points to a struct rndis_packet_msg_type */ + __le32 *tmp = (void *)skb->data; + + /* MessageType, MessageLength */ + if (cpu_to_le32(RNDIS_MSG_PACKET) + != get_unaligned(tmp++)) { + dev_kfree_skb_any(skb); + return -EINVAL; + } + tmp++; + + /* DataOffset, DataLength */ + if (!skb_pull(skb, get_unaligned_le32(tmp++) + 8)) { + dev_kfree_skb_any(skb); + return -EOVERFLOW; + } + skb_trim(skb, get_unaligned_le32(tmp++)); + + skb_queue_tail(list, skb); + return 0; +} + +#ifdef CONFIG_USB_GADGET_DEBUG_FILES + +static int rndis_proc_show(struct seq_file *m, void *v) +{ + rndis_params *param = m->private; + + seq_printf(m, + "Config Nr. %d\n" + "used : %s\n" + "state : %s\n" + "medium : 0x%08X\n" + "speed : %d\n" + "cable : %s\n" + "vendor ID : 0x%08X\n" + "vendor : %s\n", + param->confignr, (param->used) ? "y" : "n", + ({ char *s = "?"; + switch (param->state) { + case RNDIS_UNINITIALIZED: + s = "RNDIS_UNINITIALIZED"; break; + case RNDIS_INITIALIZED: + s = "RNDIS_INITIALIZED"; break; + case RNDIS_DATA_INITIALIZED: + s = "RNDIS_DATA_INITIALIZED"; break; + }; s; }), + param->medium, + (param->media_state) ? 0 : param->speed*100, + (param->media_state) ? "disconnected" : "connected", + param->vendorID, param->vendorDescr); + return 0; +} + +static ssize_t rndis_proc_write(struct file *file, const char __user *buffer, + size_t count, loff_t *ppos) +{ + rndis_params *p = PDE(file->f_path.dentry->d_inode)->data; + u32 speed = 0; + int i, fl_speed = 0; + + for (i = 0; i < count; i++) { + char c; + if (get_user(c, buffer)) + return -EFAULT; + switch (c) { + case '0': + case '1': + case '2': + case '3': + case '4': + case '5': + case '6': + case '7': + case '8': + case '9': + fl_speed = 1; + speed = speed * 10 + c - '0'; + break; + case 'C': + case 'c': + rndis_signal_connect(p->confignr); + break; + case 'D': + case 'd': + rndis_signal_disconnect(p->confignr); + break; + default: + if (fl_speed) p->speed = speed; + else pr_debug("%c is not valid\n", c); + break; + } + + buffer++; + } + + return count; +} + +static int rndis_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, rndis_proc_show, PDE(inode)->data); +} + +static const struct file_operations rndis_proc_fops = { + .owner = THIS_MODULE, + .open = rndis_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .write = rndis_proc_write, +}; + +#define NAME_TEMPLATE "driver/rndis-%03d" + +static struct proc_dir_entry *rndis_connect_state [RNDIS_MAX_CONFIGS]; + +#endif /* CONFIG_USB_GADGET_DEBUG_FILES */ + + +int rndis_init(void) +{ + u8 i; + + for (i = 0; i < RNDIS_MAX_CONFIGS; i++) { +#ifdef CONFIG_USB_GADGET_DEBUG_FILES + char name [20]; + + sprintf(name, NAME_TEMPLATE, i); + rndis_connect_state[i] = proc_create_data(name, 0660, NULL, + &rndis_proc_fops, + (void *)(rndis_per_dev_params + i)); + if (!rndis_connect_state[i]) { + pr_debug("%s: remove entries", __func__); + while (i) { + sprintf(name, NAME_TEMPLATE, --i); + remove_proc_entry(name, NULL); + } + pr_debug("\n"); + return -EIO; + } +#endif + rndis_per_dev_params[i].confignr = i; + rndis_per_dev_params[i].used = 0; + rndis_per_dev_params[i].state = RNDIS_UNINITIALIZED; + rndis_per_dev_params[i].media_state + = RNDIS_MEDIA_STATE_DISCONNECTED; + INIT_LIST_HEAD(&(rndis_per_dev_params[i].resp_queue)); + } + + return 0; +} + +void rndis_exit(void) +{ +#ifdef CONFIG_USB_GADGET_DEBUG_FILES + u8 i; + char name[20]; + + for (i = 0; i < RNDIS_MAX_CONFIGS; i++) { + sprintf(name, NAME_TEMPLATE, i); + remove_proc_entry(name, NULL); + } +#endif +} diff --git a/drivers/staging/ccg/rndis.h b/drivers/staging/ccg/rndis.h new file mode 100644 index 000000000000..0647f2f34e89 --- /dev/null +++ b/drivers/staging/ccg/rndis.h @@ -0,0 +1,222 @@ +/* + * RNDIS Definitions for Remote NDIS + * + * Authors: Benedikt Spranger, Pengutronix + * Robert Schwebel, Pengutronix + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2, as published by the Free Software Foundation. + * + * This software was originally developed in conformance with + * Microsoft's Remote NDIS Specification License Agreement. + */ + +#ifndef _LINUX_RNDIS_H +#define _LINUX_RNDIS_H + +#include <linux/rndis.h> +#include "ndis.h" + +#define RNDIS_MAXIMUM_FRAME_SIZE 1518 +#define RNDIS_MAX_TOTAL_SIZE 1558 + +typedef struct rndis_init_msg_type +{ + __le32 MessageType; + __le32 MessageLength; + __le32 RequestID; + __le32 MajorVersion; + __le32 MinorVersion; + __le32 MaxTransferSize; +} rndis_init_msg_type; + +typedef struct rndis_init_cmplt_type +{ + __le32 MessageType; + __le32 MessageLength; + __le32 RequestID; + __le32 Status; + __le32 MajorVersion; + __le32 MinorVersion; + __le32 DeviceFlags; + __le32 Medium; + __le32 MaxPacketsPerTransfer; + __le32 MaxTransferSize; + __le32 PacketAlignmentFactor; + __le32 AFListOffset; + __le32 AFListSize; +} rndis_init_cmplt_type; + +typedef struct rndis_halt_msg_type +{ + __le32 MessageType; + __le32 MessageLength; + __le32 RequestID; +} rndis_halt_msg_type; + +typedef struct rndis_query_msg_type +{ + __le32 MessageType; + __le32 MessageLength; + __le32 RequestID; + __le32 OID; + __le32 InformationBufferLength; + __le32 InformationBufferOffset; + __le32 DeviceVcHandle; +} rndis_query_msg_type; + +typedef struct rndis_query_cmplt_type +{ + __le32 MessageType; + __le32 MessageLength; + __le32 RequestID; + __le32 Status; + __le32 InformationBufferLength; + __le32 InformationBufferOffset; +} rndis_query_cmplt_type; + +typedef struct rndis_set_msg_type +{ + __le32 MessageType; + __le32 MessageLength; + __le32 RequestID; + __le32 OID; + __le32 InformationBufferLength; + __le32 InformationBufferOffset; + __le32 DeviceVcHandle; +} rndis_set_msg_type; + +typedef struct rndis_set_cmplt_type +{ + __le32 MessageType; + __le32 MessageLength; + __le32 RequestID; + __le32 Status; +} rndis_set_cmplt_type; + +typedef struct rndis_reset_msg_type +{ + __le32 MessageType; + __le32 MessageLength; + __le32 Reserved; +} rndis_reset_msg_type; + +typedef struct rndis_reset_cmplt_type +{ + __le32 MessageType; + __le32 MessageLength; + __le32 Status; + __le32 AddressingReset; +} rndis_reset_cmplt_type; + +typedef struct rndis_indicate_status_msg_type +{ + __le32 MessageType; + __le32 MessageLength; + __le32 Status; + __le32 StatusBufferLength; + __le32 StatusBufferOffset; +} rndis_indicate_status_msg_type; + +typedef struct rndis_keepalive_msg_type +{ + __le32 MessageType; + __le32 MessageLength; + __le32 RequestID; +} rndis_keepalive_msg_type; + +typedef struct rndis_keepalive_cmplt_type +{ + __le32 MessageType; + __le32 MessageLength; + __le32 RequestID; + __le32 Status; +} rndis_keepalive_cmplt_type; + +struct rndis_packet_msg_type +{ + __le32 MessageType; + __le32 MessageLength; + __le32 DataOffset; + __le32 DataLength; + __le32 OOBDataOffset; + __le32 OOBDataLength; + __le32 NumOOBDataElements; + __le32 PerPacketInfoOffset; + __le32 PerPacketInfoLength; + __le32 VcHandle; + __le32 Reserved; +} __attribute__ ((packed)); + +struct rndis_config_parameter +{ + __le32 ParameterNameOffset; + __le32 ParameterNameLength; + __le32 ParameterType; + __le32 ParameterValueOffset; + __le32 ParameterValueLength; +}; + +/* implementation specific */ +enum rndis_state +{ + RNDIS_UNINITIALIZED, + RNDIS_INITIALIZED, + RNDIS_DATA_INITIALIZED, +}; + +typedef struct rndis_resp_t +{ + struct list_head list; + u8 *buf; + u32 length; + int send; +} rndis_resp_t; + +typedef struct rndis_params +{ + u8 confignr; + u8 used; + u16 saved_filter; + enum rndis_state state; + u32 medium; + u32 speed; + u32 media_state; + + const u8 *host_mac; + u16 *filter; + struct net_device *dev; + + u32 vendorID; + const char *vendorDescr; + void (*resp_avail)(void *v); + void *v; + struct list_head resp_queue; +} rndis_params; + +/* RNDIS Message parser and other useless functions */ +int rndis_msg_parser (u8 configNr, u8 *buf); +int rndis_register(void (*resp_avail)(void *v), void *v); +void rndis_deregister (int configNr); +int rndis_set_param_dev (u8 configNr, struct net_device *dev, + u16 *cdc_filter); +int rndis_set_param_vendor (u8 configNr, u32 vendorID, + const char *vendorDescr); +int rndis_set_param_medium (u8 configNr, u32 medium, u32 speed); +void rndis_add_hdr (struct sk_buff *skb); +int rndis_rm_hdr(struct gether *port, struct sk_buff *skb, + struct sk_buff_head *list); +u8 *rndis_get_next_response (int configNr, u32 *length); +void rndis_free_response (int configNr, u8 *buf); + +void rndis_uninit (int configNr); +int rndis_signal_connect (int configNr); +int rndis_signal_disconnect (int configNr); +int rndis_state (int configNr); +extern void rndis_set_host_mac (int configNr, const u8 *addr); + +int rndis_init(void); +void rndis_exit (void); + +#endif /* _LINUX_RNDIS_H */ diff --git a/drivers/staging/ccg/storage_common.c b/drivers/staging/ccg/storage_common.c new file mode 100644 index 000000000000..8d9bcd8207c8 --- /dev/null +++ b/drivers/staging/ccg/storage_common.c @@ -0,0 +1,893 @@ +/* + * storage_common.c -- Common definitions for mass storage functionality + * + * Copyright (C) 2003-2008 Alan Stern + * Copyeight (C) 2009 Samsung Electronics + * Author: Michal Nazarewicz (mina86@mina86.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + + +/* + * This file requires the following identifiers used in USB strings to + * be defined (each of type pointer to char): + * - fsg_string_manufacturer -- name of the manufacturer + * - fsg_string_product -- name of the product + * - fsg_string_config -- name of the configuration + * - fsg_string_interface -- name of the interface + * The first four are only needed when FSG_DESCRIPTORS_DEVICE_STRINGS + * macro is defined prior to including this file. + */ + +/* + * When FSG_NO_INTR_EP is defined fsg_fs_intr_in_desc and + * fsg_hs_intr_in_desc objects as well as + * FSG_FS_FUNCTION_PRE_EP_ENTRIES and FSG_HS_FUNCTION_PRE_EP_ENTRIES + * macros are not defined. + * + * When FSG_NO_DEVICE_STRINGS is defined FSG_STRING_MANUFACTURER, + * FSG_STRING_PRODUCT, FSG_STRING_SERIAL and FSG_STRING_CONFIG are not + * defined (as well as corresponding entries in string tables are + * missing) and FSG_STRING_INTERFACE has value of zero. + * + * When FSG_NO_OTG is defined fsg_otg_desc won't be defined. + */ + +/* + * When USB_GADGET_DEBUG_FILES is defined the module param num_buffers + * sets the number of pipeline buffers (length of the fsg_buffhd array). + * The valid range of num_buffers is: num >= 2 && num <= 4. + */ + + +#include <linux/usb/storage.h> +#include <scsi/scsi.h> +#include <asm/unaligned.h> + + +/* + * Thanks to NetChip Technologies for donating this product ID. + * + * DO NOT REUSE THESE IDs with any other driver!! Ever!! + * Instead: allocate your own, using normal USB-IF procedures. + */ +#define FSG_VENDOR_ID 0x0525 /* NetChip */ +#define FSG_PRODUCT_ID 0xa4a5 /* Linux-USB File-backed Storage Gadget */ + + +/*-------------------------------------------------------------------------*/ + + +#ifndef DEBUG +#undef VERBOSE_DEBUG +#undef DUMP_MSGS +#endif /* !DEBUG */ + +#ifdef VERBOSE_DEBUG +#define VLDBG LDBG +#else +#define VLDBG(lun, fmt, args...) do { } while (0) +#endif /* VERBOSE_DEBUG */ + +#define LDBG(lun, fmt, args...) dev_dbg (&(lun)->dev, fmt, ## args) +#define LERROR(lun, fmt, args...) dev_err (&(lun)->dev, fmt, ## args) +#define LWARN(lun, fmt, args...) dev_warn(&(lun)->dev, fmt, ## args) +#define LINFO(lun, fmt, args...) dev_info(&(lun)->dev, fmt, ## args) + +/* + * Keep those macros in sync with those in + * include/linux/usb/composite.h or else GCC will complain. If they + * are identical (the same names of arguments, white spaces in the + * same places) GCC will allow redefinition otherwise (even if some + * white space is removed or added) warning will be issued. + * + * Those macros are needed here because File Storage Gadget does not + * include the composite.h header. For composite gadgets those macros + * are redundant since composite.h is included any way. + * + * One could check whether those macros are already defined (which + * would indicate composite.h had been included) or not (which would + * indicate we were in FSG) but this is not done because a warning is + * desired if definitions here differ from the ones in composite.h. + * + * We want the definitions to match and be the same in File Storage + * Gadget as well as Mass Storage Function (and so composite gadgets + * using MSF). If someone changes them in composite.h it will produce + * a warning in this file when building MSF. + */ +#define DBG(d, fmt, args...) dev_dbg(&(d)->gadget->dev , fmt , ## args) +#define VDBG(d, fmt, args...) dev_vdbg(&(d)->gadget->dev , fmt , ## args) +#define ERROR(d, fmt, args...) dev_err(&(d)->gadget->dev , fmt , ## args) +#define WARNING(d, fmt, args...) dev_warn(&(d)->gadget->dev , fmt , ## args) +#define INFO(d, fmt, args...) dev_info(&(d)->gadget->dev , fmt , ## args) + + + +#ifdef DUMP_MSGS + +# define dump_msg(fsg, /* const char * */ label, \ + /* const u8 * */ buf, /* unsigned */ length) do { \ + if (length < 512) { \ + DBG(fsg, "%s, length %u:\n", label, length); \ + print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, \ + 16, 1, buf, length, 0); \ + } \ +} while (0) + +# define dump_cdb(fsg) do { } while (0) + +#else + +# define dump_msg(fsg, /* const char * */ label, \ + /* const u8 * */ buf, /* unsigned */ length) do { } while (0) + +# ifdef VERBOSE_DEBUG + +# define dump_cdb(fsg) \ + print_hex_dump(KERN_DEBUG, "SCSI CDB: ", DUMP_PREFIX_NONE, \ + 16, 1, (fsg)->cmnd, (fsg)->cmnd_size, 0) \ + +# else + +# define dump_cdb(fsg) do { } while (0) + +# endif /* VERBOSE_DEBUG */ + +#endif /* DUMP_MSGS */ + +/*-------------------------------------------------------------------------*/ + +/* CBI Interrupt data structure */ +struct interrupt_data { + u8 bType; + u8 bValue; +}; + +#define CBI_INTERRUPT_DATA_LEN 2 + +/* CBI Accept Device-Specific Command request */ +#define USB_CBI_ADSC_REQUEST 0x00 + + +/* Length of a SCSI Command Data Block */ +#define MAX_COMMAND_SIZE 16 + +/* SCSI Sense Key/Additional Sense Code/ASC Qualifier values */ +#define SS_NO_SENSE 0 +#define SS_COMMUNICATION_FAILURE 0x040800 +#define SS_INVALID_COMMAND 0x052000 +#define SS_INVALID_FIELD_IN_CDB 0x052400 +#define SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE 0x052100 +#define SS_LOGICAL_UNIT_NOT_SUPPORTED 0x052500 +#define SS_MEDIUM_NOT_PRESENT 0x023a00 +#define SS_MEDIUM_REMOVAL_PREVENTED 0x055302 +#define SS_NOT_READY_TO_READY_TRANSITION 0x062800 +#define SS_RESET_OCCURRED 0x062900 +#define SS_SAVING_PARAMETERS_NOT_SUPPORTED 0x053900 +#define SS_UNRECOVERED_READ_ERROR 0x031100 +#define SS_WRITE_ERROR 0x030c02 +#define SS_WRITE_PROTECTED 0x072700 + +#define SK(x) ((u8) ((x) >> 16)) /* Sense Key byte, etc. */ +#define ASC(x) ((u8) ((x) >> 8)) +#define ASCQ(x) ((u8) (x)) + + +/*-------------------------------------------------------------------------*/ + + +struct fsg_lun { + struct file *filp; + loff_t file_length; + loff_t num_sectors; + + unsigned int initially_ro:1; + unsigned int ro:1; + unsigned int removable:1; + unsigned int cdrom:1; + unsigned int prevent_medium_removal:1; + unsigned int registered:1; + unsigned int info_valid:1; + unsigned int nofua:1; + + u32 sense_data; + u32 sense_data_info; + u32 unit_attention_data; + + unsigned int blkbits; /* Bits of logical block size of bound block device */ + unsigned int blksize; /* logical block size of bound block device */ + struct device dev; +}; + +#define fsg_lun_is_open(curlun) ((curlun)->filp != NULL) + +static struct fsg_lun *fsg_lun_from_dev(struct device *dev) +{ + return container_of(dev, struct fsg_lun, dev); +} + + +/* Big enough to hold our biggest descriptor */ +#define EP0_BUFSIZE 256 +#define DELAYED_STATUS (EP0_BUFSIZE + 999) /* An impossibly large value */ + +#ifdef CONFIG_USB_GADGET_DEBUG_FILES + +static unsigned int fsg_num_buffers = CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS; +module_param_named(num_buffers, fsg_num_buffers, uint, S_IRUGO); +MODULE_PARM_DESC(num_buffers, "Number of pipeline buffers"); + +#else + +/* + * Number of buffers we will use. + * 2 is usually enough for good buffering pipeline + */ +#define fsg_num_buffers CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS + +#endif /* CONFIG_USB_DEBUG */ + +/* check if fsg_num_buffers is within a valid range */ +static inline int fsg_num_buffers_validate(void) +{ + if (fsg_num_buffers >= 2 && fsg_num_buffers <= 4) + return 0; + pr_err("fsg_num_buffers %u is out of range (%d to %d)\n", + fsg_num_buffers, 2 ,4); + return -EINVAL; +} + +/* Default size of buffer length. */ +#define FSG_BUFLEN ((u32)16384) + +/* Maximal number of LUNs supported in mass storage function */ +#define FSG_MAX_LUNS 8 + +enum fsg_buffer_state { + BUF_STATE_EMPTY = 0, + BUF_STATE_FULL, + BUF_STATE_BUSY +}; + +struct fsg_buffhd { + void *buf; + enum fsg_buffer_state state; + struct fsg_buffhd *next; + + /* + * The NetChip 2280 is faster, and handles some protocol faults + * better, if we don't submit any short bulk-out read requests. + * So we will record the intended request length here. + */ + unsigned int bulk_out_intended_length; + + struct usb_request *inreq; + int inreq_busy; + struct usb_request *outreq; + int outreq_busy; +}; + +enum fsg_state { + /* This one isn't used anywhere */ + FSG_STATE_COMMAND_PHASE = -10, + FSG_STATE_DATA_PHASE, + FSG_STATE_STATUS_PHASE, + + FSG_STATE_IDLE = 0, + FSG_STATE_ABORT_BULK_OUT, + FSG_STATE_RESET, + FSG_STATE_INTERFACE_CHANGE, + FSG_STATE_CONFIG_CHANGE, + FSG_STATE_DISCONNECT, + FSG_STATE_EXIT, + FSG_STATE_TERMINATED +}; + +enum data_direction { + DATA_DIR_UNKNOWN = 0, + DATA_DIR_FROM_HOST, + DATA_DIR_TO_HOST, + DATA_DIR_NONE +}; + + +/*-------------------------------------------------------------------------*/ + + +static inline u32 get_unaligned_be24(u8 *buf) +{ + return 0xffffff & (u32) get_unaligned_be32(buf - 1); +} + + +/*-------------------------------------------------------------------------*/ + + +enum { +#ifndef FSG_NO_DEVICE_STRINGS + FSG_STRING_MANUFACTURER = 1, + FSG_STRING_PRODUCT, + FSG_STRING_SERIAL, + FSG_STRING_CONFIG, +#endif + FSG_STRING_INTERFACE +}; + + +#ifndef FSG_NO_OTG +static struct usb_otg_descriptor +fsg_otg_desc = { + .bLength = sizeof fsg_otg_desc, + .bDescriptorType = USB_DT_OTG, + + .bmAttributes = USB_OTG_SRP, +}; +#endif + +/* There is only one interface. */ + +static struct usb_interface_descriptor +fsg_intf_desc = { + .bLength = sizeof fsg_intf_desc, + .bDescriptorType = USB_DT_INTERFACE, + + .bNumEndpoints = 2, /* Adjusted during fsg_bind() */ + .bInterfaceClass = USB_CLASS_MASS_STORAGE, + .bInterfaceSubClass = USB_SC_SCSI, /* Adjusted during fsg_bind() */ + .bInterfaceProtocol = USB_PR_BULK, /* Adjusted during fsg_bind() */ + .iInterface = FSG_STRING_INTERFACE, +}; + +/* + * Three full-speed endpoint descriptors: bulk-in, bulk-out, and + * interrupt-in. + */ + +static struct usb_endpoint_descriptor +fsg_fs_bulk_in_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + .bEndpointAddress = USB_DIR_IN, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + /* wMaxPacketSize set by autoconfiguration */ +}; + +static struct usb_endpoint_descriptor +fsg_fs_bulk_out_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + .bEndpointAddress = USB_DIR_OUT, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + /* wMaxPacketSize set by autoconfiguration */ +}; + +#ifndef FSG_NO_INTR_EP + +static struct usb_endpoint_descriptor +fsg_fs_intr_in_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + .bEndpointAddress = USB_DIR_IN, + .bmAttributes = USB_ENDPOINT_XFER_INT, + .wMaxPacketSize = cpu_to_le16(2), + .bInterval = 32, /* frames -> 32 ms */ +}; + +#ifndef FSG_NO_OTG +# define FSG_FS_FUNCTION_PRE_EP_ENTRIES 2 +#else +# define FSG_FS_FUNCTION_PRE_EP_ENTRIES 1 +#endif + +#endif + +static struct usb_descriptor_header *fsg_fs_function[] = { +#ifndef FSG_NO_OTG + (struct usb_descriptor_header *) &fsg_otg_desc, +#endif + (struct usb_descriptor_header *) &fsg_intf_desc, + (struct usb_descriptor_header *) &fsg_fs_bulk_in_desc, + (struct usb_descriptor_header *) &fsg_fs_bulk_out_desc, +#ifndef FSG_NO_INTR_EP + (struct usb_descriptor_header *) &fsg_fs_intr_in_desc, +#endif + NULL, +}; + + +/* + * USB 2.0 devices need to expose both high speed and full speed + * descriptors, unless they only run at full speed. + * + * That means alternate endpoint descriptors (bigger packets) + * and a "device qualifier" ... plus more construction options + * for the configuration descriptor. + */ +static struct usb_endpoint_descriptor +fsg_hs_bulk_in_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + /* bEndpointAddress copied from fs_bulk_in_desc during fsg_bind() */ + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .wMaxPacketSize = cpu_to_le16(512), +}; + +static struct usb_endpoint_descriptor +fsg_hs_bulk_out_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + /* bEndpointAddress copied from fs_bulk_out_desc during fsg_bind() */ + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .wMaxPacketSize = cpu_to_le16(512), + .bInterval = 1, /* NAK every 1 uframe */ +}; + +#ifndef FSG_NO_INTR_EP + +static struct usb_endpoint_descriptor +fsg_hs_intr_in_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + /* bEndpointAddress copied from fs_intr_in_desc during fsg_bind() */ + .bmAttributes = USB_ENDPOINT_XFER_INT, + .wMaxPacketSize = cpu_to_le16(2), + .bInterval = 9, /* 2**(9-1) = 256 uframes -> 32 ms */ +}; + +#ifndef FSG_NO_OTG +# define FSG_HS_FUNCTION_PRE_EP_ENTRIES 2 +#else +# define FSG_HS_FUNCTION_PRE_EP_ENTRIES 1 +#endif + +#endif + +static struct usb_descriptor_header *fsg_hs_function[] = { +#ifndef FSG_NO_OTG + (struct usb_descriptor_header *) &fsg_otg_desc, +#endif + (struct usb_descriptor_header *) &fsg_intf_desc, + (struct usb_descriptor_header *) &fsg_hs_bulk_in_desc, + (struct usb_descriptor_header *) &fsg_hs_bulk_out_desc, +#ifndef FSG_NO_INTR_EP + (struct usb_descriptor_header *) &fsg_hs_intr_in_desc, +#endif + NULL, +}; + +static struct usb_endpoint_descriptor +fsg_ss_bulk_in_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + /* bEndpointAddress copied from fs_bulk_in_desc during fsg_bind() */ + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .wMaxPacketSize = cpu_to_le16(1024), +}; + +static struct usb_ss_ep_comp_descriptor fsg_ss_bulk_in_comp_desc = { + .bLength = sizeof(fsg_ss_bulk_in_comp_desc), + .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, + + /*.bMaxBurst = DYNAMIC, */ +}; + +static struct usb_endpoint_descriptor +fsg_ss_bulk_out_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + /* bEndpointAddress copied from fs_bulk_out_desc during fsg_bind() */ + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .wMaxPacketSize = cpu_to_le16(1024), +}; + +static struct usb_ss_ep_comp_descriptor fsg_ss_bulk_out_comp_desc = { + .bLength = sizeof(fsg_ss_bulk_in_comp_desc), + .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, + + /*.bMaxBurst = DYNAMIC, */ +}; + +#ifndef FSG_NO_INTR_EP + +static struct usb_endpoint_descriptor +fsg_ss_intr_in_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + /* bEndpointAddress copied from fs_intr_in_desc during fsg_bind() */ + .bmAttributes = USB_ENDPOINT_XFER_INT, + .wMaxPacketSize = cpu_to_le16(2), + .bInterval = 9, /* 2**(9-1) = 256 uframes -> 32 ms */ +}; + +static struct usb_ss_ep_comp_descriptor fsg_ss_intr_in_comp_desc = { + .bLength = sizeof(fsg_ss_bulk_in_comp_desc), + .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, + + .wBytesPerInterval = cpu_to_le16(2), +}; + +#ifndef FSG_NO_OTG +# define FSG_SS_FUNCTION_PRE_EP_ENTRIES 2 +#else +# define FSG_SS_FUNCTION_PRE_EP_ENTRIES 1 +#endif + +#endif + +static __maybe_unused struct usb_ext_cap_descriptor fsg_ext_cap_desc = { + .bLength = USB_DT_USB_EXT_CAP_SIZE, + .bDescriptorType = USB_DT_DEVICE_CAPABILITY, + .bDevCapabilityType = USB_CAP_TYPE_EXT, + + .bmAttributes = cpu_to_le32(USB_LPM_SUPPORT), +}; + +static __maybe_unused struct usb_ss_cap_descriptor fsg_ss_cap_desc = { + .bLength = USB_DT_USB_SS_CAP_SIZE, + .bDescriptorType = USB_DT_DEVICE_CAPABILITY, + .bDevCapabilityType = USB_SS_CAP_TYPE, + + /* .bmAttributes = LTM is not supported yet */ + + .wSpeedSupported = cpu_to_le16(USB_LOW_SPEED_OPERATION + | USB_FULL_SPEED_OPERATION + | USB_HIGH_SPEED_OPERATION + | USB_5GBPS_OPERATION), + .bFunctionalitySupport = USB_LOW_SPEED_OPERATION, + .bU1devExitLat = USB_DEFAULT_U1_DEV_EXIT_LAT, + .bU2DevExitLat = cpu_to_le16(USB_DEFAULT_U2_DEV_EXIT_LAT), +}; + +static __maybe_unused struct usb_bos_descriptor fsg_bos_desc = { + .bLength = USB_DT_BOS_SIZE, + .bDescriptorType = USB_DT_BOS, + + .wTotalLength = cpu_to_le16(USB_DT_BOS_SIZE + + USB_DT_USB_EXT_CAP_SIZE + + USB_DT_USB_SS_CAP_SIZE), + + .bNumDeviceCaps = 2, +}; + +static struct usb_descriptor_header *fsg_ss_function[] = { +#ifndef FSG_NO_OTG + (struct usb_descriptor_header *) &fsg_otg_desc, +#endif + (struct usb_descriptor_header *) &fsg_intf_desc, + (struct usb_descriptor_header *) &fsg_ss_bulk_in_desc, + (struct usb_descriptor_header *) &fsg_ss_bulk_in_comp_desc, + (struct usb_descriptor_header *) &fsg_ss_bulk_out_desc, + (struct usb_descriptor_header *) &fsg_ss_bulk_out_comp_desc, +#ifndef FSG_NO_INTR_EP + (struct usb_descriptor_header *) &fsg_ss_intr_in_desc, + (struct usb_descriptor_header *) &fsg_ss_intr_in_comp_desc, +#endif + NULL, +}; + +/* Maxpacket and other transfer characteristics vary by speed. */ +static __maybe_unused struct usb_endpoint_descriptor * +fsg_ep_desc(struct usb_gadget *g, struct usb_endpoint_descriptor *fs, + struct usb_endpoint_descriptor *hs, + struct usb_endpoint_descriptor *ss) +{ + if (gadget_is_superspeed(g) && g->speed == USB_SPEED_SUPER) + return ss; + else if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH) + return hs; + return fs; +} + + +/* Static strings, in UTF-8 (for simplicity we use only ASCII characters) */ +static struct usb_string fsg_strings[] = { +#ifndef FSG_NO_DEVICE_STRINGS + {FSG_STRING_MANUFACTURER, fsg_string_manufacturer}, + {FSG_STRING_PRODUCT, fsg_string_product}, + {FSG_STRING_SERIAL, ""}, + {FSG_STRING_CONFIG, fsg_string_config}, +#endif + {FSG_STRING_INTERFACE, fsg_string_interface}, + {} +}; + +static struct usb_gadget_strings fsg_stringtab = { + .language = 0x0409, /* en-us */ + .strings = fsg_strings, +}; + + + /*-------------------------------------------------------------------------*/ + +/* + * If the next two routines are called while the gadget is registered, + * the caller must own fsg->filesem for writing. + */ + +static void fsg_lun_close(struct fsg_lun *curlun) +{ + if (curlun->filp) { + LDBG(curlun, "close backing file\n"); + fput(curlun->filp); + curlun->filp = NULL; + } +} + + +static int fsg_lun_open(struct fsg_lun *curlun, const char *filename) +{ + int ro; + struct file *filp = NULL; + int rc = -EINVAL; + struct inode *inode = NULL; + loff_t size; + loff_t num_sectors; + loff_t min_sectors; + unsigned int blkbits; + unsigned int blksize; + + /* R/W if we can, R/O if we must */ + ro = curlun->initially_ro; + if (!ro) { + filp = filp_open(filename, O_RDWR | O_LARGEFILE, 0); + if (PTR_ERR(filp) == -EROFS || PTR_ERR(filp) == -EACCES) + ro = 1; + } + if (ro) + filp = filp_open(filename, O_RDONLY | O_LARGEFILE, 0); + if (IS_ERR(filp)) { + LINFO(curlun, "unable to open backing file: %s\n", filename); + return PTR_ERR(filp); + } + + if (!(filp->f_mode & FMODE_WRITE)) + ro = 1; + + inode = filp->f_path.dentry->d_inode; + if ((!S_ISREG(inode->i_mode) && !S_ISBLK(inode->i_mode))) { + LINFO(curlun, "invalid file type: %s\n", filename); + goto out; + } + + /* + * If we can't read the file, it's no good. + * If we can't write the file, use it read-only. + */ + if (!(filp->f_op->read || filp->f_op->aio_read)) { + LINFO(curlun, "file not readable: %s\n", filename); + goto out; + } + if (!(filp->f_op->write || filp->f_op->aio_write)) + ro = 1; + + size = i_size_read(inode->i_mapping->host); + if (size < 0) { + LINFO(curlun, "unable to find file size: %s\n", filename); + rc = (int) size; + goto out; + } + + if (curlun->cdrom) { + blksize = 2048; + blkbits = 11; + } else if (inode->i_bdev) { + blksize = bdev_logical_block_size(inode->i_bdev); + blkbits = blksize_bits(blksize); + } else { + blksize = 512; + blkbits = 9; + } + + num_sectors = size >> blkbits; /* File size in logic-block-size blocks */ + min_sectors = 1; + if (curlun->cdrom) { + min_sectors = 300; /* Smallest track is 300 frames */ + if (num_sectors >= 256*60*75) { + num_sectors = 256*60*75 - 1; + LINFO(curlun, "file too big: %s\n", filename); + LINFO(curlun, "using only first %d blocks\n", + (int) num_sectors); + } + } + if (num_sectors < min_sectors) { + LINFO(curlun, "file too small: %s\n", filename); + rc = -ETOOSMALL; + goto out; + } + + if (fsg_lun_is_open(curlun)) + fsg_lun_close(curlun); + + curlun->blksize = blksize; + curlun->blkbits = blkbits; + curlun->ro = ro; + curlun->filp = filp; + curlun->file_length = size; + curlun->num_sectors = num_sectors; + LDBG(curlun, "open backing file: %s\n", filename); + return 0; + +out: + fput(filp); + return rc; +} + + +/*-------------------------------------------------------------------------*/ + +/* + * Sync the file data, don't bother with the metadata. + * This code was copied from fs/buffer.c:sys_fdatasync(). + */ +static int fsg_lun_fsync_sub(struct fsg_lun *curlun) +{ + struct file *filp = curlun->filp; + + if (curlun->ro || !filp) + return 0; + return vfs_fsync(filp, 1); +} + +static void store_cdrom_address(u8 *dest, int msf, u32 addr) +{ + if (msf) { + /* Convert to Minutes-Seconds-Frames */ + addr >>= 2; /* Convert to 2048-byte frames */ + addr += 2*75; /* Lead-in occupies 2 seconds */ + dest[3] = addr % 75; /* Frames */ + addr /= 75; + dest[2] = addr % 60; /* Seconds */ + addr /= 60; + dest[1] = addr; /* Minutes */ + dest[0] = 0; /* Reserved */ + } else { + /* Absolute sector */ + put_unaligned_be32(addr, dest); + } +} + + +/*-------------------------------------------------------------------------*/ + + +static ssize_t fsg_show_ro(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct fsg_lun *curlun = fsg_lun_from_dev(dev); + + return sprintf(buf, "%d\n", fsg_lun_is_open(curlun) + ? curlun->ro + : curlun->initially_ro); +} + +static ssize_t fsg_show_nofua(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct fsg_lun *curlun = fsg_lun_from_dev(dev); + + return sprintf(buf, "%u\n", curlun->nofua); +} + +static ssize_t fsg_show_file(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct fsg_lun *curlun = fsg_lun_from_dev(dev); + struct rw_semaphore *filesem = dev_get_drvdata(dev); + char *p; + ssize_t rc; + + down_read(filesem); + if (fsg_lun_is_open(curlun)) { /* Get the complete pathname */ + p = d_path(&curlun->filp->f_path, buf, PAGE_SIZE - 1); + if (IS_ERR(p)) + rc = PTR_ERR(p); + else { + rc = strlen(p); + memmove(buf, p, rc); + buf[rc] = '\n'; /* Add a newline */ + buf[++rc] = 0; + } + } else { /* No file, return 0 bytes */ + *buf = 0; + rc = 0; + } + up_read(filesem); + return rc; +} + + +static ssize_t fsg_store_ro(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + ssize_t rc; + struct fsg_lun *curlun = fsg_lun_from_dev(dev); + struct rw_semaphore *filesem = dev_get_drvdata(dev); + unsigned ro; + + rc = kstrtouint(buf, 2, &ro); + if (rc) + return rc; + + /* + * Allow the write-enable status to change only while the + * backing file is closed. + */ + down_read(filesem); + if (fsg_lun_is_open(curlun)) { + LDBG(curlun, "read-only status change prevented\n"); + rc = -EBUSY; + } else { + curlun->ro = ro; + curlun->initially_ro = ro; + LDBG(curlun, "read-only status set to %d\n", curlun->ro); + rc = count; + } + up_read(filesem); + return rc; +} + +static ssize_t fsg_store_nofua(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct fsg_lun *curlun = fsg_lun_from_dev(dev); + unsigned nofua; + int ret; + + ret = kstrtouint(buf, 2, &nofua); + if (ret) + return ret; + + /* Sync data when switching from async mode to sync */ + if (!nofua && curlun->nofua) + fsg_lun_fsync_sub(curlun); + + curlun->nofua = nofua; + + return count; +} + +static ssize_t fsg_store_file(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct fsg_lun *curlun = fsg_lun_from_dev(dev); + struct rw_semaphore *filesem = dev_get_drvdata(dev); + int rc = 0; + + if (curlun->prevent_medium_removal && fsg_lun_is_open(curlun)) { + LDBG(curlun, "eject attempt prevented\n"); + return -EBUSY; /* "Door is locked" */ + } + + /* Remove a trailing newline */ + if (count > 0 && buf[count-1] == '\n') + ((char *) buf)[count-1] = 0; /* Ugh! */ + + /* Load new medium */ + down_write(filesem); + if (count > 0 && buf[0]) { + /* fsg_lun_open() will close existing file if any. */ + rc = fsg_lun_open(curlun, buf); + if (rc == 0) + curlun->unit_attention_data = + SS_NOT_READY_TO_READY_TRANSITION; + } else if (fsg_lun_is_open(curlun)) { + fsg_lun_close(curlun); + curlun->unit_attention_data = SS_MEDIUM_NOT_PRESENT; + } + up_write(filesem); + return (rc < 0 ? rc : count); +} diff --git a/drivers/staging/ccg/u_ether.c b/drivers/staging/ccg/u_ether.c new file mode 100644 index 000000000000..1154a99dc8db --- /dev/null +++ b/drivers/staging/ccg/u_ether.c @@ -0,0 +1,986 @@ +/* + * u_ether.c -- Ethernet-over-USB link layer utilities for Gadget stack + * + * Copyright (C) 2003-2005,2008 David Brownell + * Copyright (C) 2003-2004 Robert Schwebel, Benedikt Spranger + * Copyright (C) 2008 Nokia Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +/* #define VERBOSE_DEBUG */ + +#include <linux/kernel.h> +#include <linux/gfp.h> +#include <linux/device.h> +#include <linux/ctype.h> +#include <linux/etherdevice.h> +#include <linux/ethtool.h> + +#include "u_ether.h" + + +/* + * This component encapsulates the Ethernet link glue needed to provide + * one (!) network link through the USB gadget stack, normally "usb0". + * + * The control and data models are handled by the function driver which + * connects to this code; such as CDC Ethernet (ECM or EEM), + * "CDC Subset", or RNDIS. That includes all descriptor and endpoint + * management. + * + * Link level addressing is handled by this component using module + * parameters; if no such parameters are provided, random link level + * addresses are used. Each end of the link uses one address. The + * host end address is exported in various ways, and is often recorded + * in configuration databases. + * + * The driver which assembles each configuration using such a link is + * responsible for ensuring that each configuration includes at most one + * instance of is network link. (The network layer provides ways for + * this single "physical" link to be used by multiple virtual links.) + */ + +#define UETH__VERSION "29-May-2008" + +struct eth_dev { + /* lock is held while accessing port_usb + * or updating its backlink port_usb->ioport + */ + spinlock_t lock; + struct gether *port_usb; + + struct net_device *net; + struct usb_gadget *gadget; + + spinlock_t req_lock; /* guard {rx,tx}_reqs */ + struct list_head tx_reqs, rx_reqs; + atomic_t tx_qlen; + + struct sk_buff_head rx_frames; + + unsigned header_len; + struct sk_buff *(*wrap)(struct gether *, struct sk_buff *skb); + int (*unwrap)(struct gether *, + struct sk_buff *skb, + struct sk_buff_head *list); + + struct work_struct work; + + unsigned long todo; +#define WORK_RX_MEMORY 0 + + bool zlp; + u8 host_mac[ETH_ALEN]; +}; + +/*-------------------------------------------------------------------------*/ + +#define RX_EXTRA 20 /* bytes guarding against rx overflows */ + +#define DEFAULT_QLEN 2 /* double buffering by default */ + +static unsigned qmult = 5; +module_param(qmult, uint, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(qmult, "queue length multiplier at high/super speed"); + +/* for dual-speed hardware, use deeper queues at high/super speed */ +static inline int qlen(struct usb_gadget *gadget) +{ + if (gadget_is_dualspeed(gadget) && (gadget->speed == USB_SPEED_HIGH || + gadget->speed == USB_SPEED_SUPER)) + return qmult * DEFAULT_QLEN; + else + return DEFAULT_QLEN; +} + +/*-------------------------------------------------------------------------*/ + +/* REVISIT there must be a better way than having two sets + * of debug calls ... + */ + +#undef DBG +#undef VDBG +#undef ERROR +#undef INFO + +#define xprintk(d, level, fmt, args...) \ + printk(level "%s: " fmt , (d)->net->name , ## args) + +#ifdef DEBUG +#undef DEBUG +#define DBG(dev, fmt, args...) \ + xprintk(dev , KERN_DEBUG , fmt , ## args) +#else +#define DBG(dev, fmt, args...) \ + do { } while (0) +#endif /* DEBUG */ + +#ifdef VERBOSE_DEBUG +#define VDBG DBG +#else +#define VDBG(dev, fmt, args...) \ + do { } while (0) +#endif /* DEBUG */ + +#define ERROR(dev, fmt, args...) \ + xprintk(dev , KERN_ERR , fmt , ## args) +#define INFO(dev, fmt, args...) \ + xprintk(dev , KERN_INFO , fmt , ## args) + +/*-------------------------------------------------------------------------*/ + +/* NETWORK DRIVER HOOKUP (to the layer above this driver) */ + +static int ueth_change_mtu(struct net_device *net, int new_mtu) +{ + struct eth_dev *dev = netdev_priv(net); + unsigned long flags; + int status = 0; + + /* don't change MTU on "live" link (peer won't know) */ + spin_lock_irqsave(&dev->lock, flags); + if (dev->port_usb) + status = -EBUSY; + else if (new_mtu <= ETH_HLEN || new_mtu > ETH_FRAME_LEN) + status = -ERANGE; + else + net->mtu = new_mtu; + spin_unlock_irqrestore(&dev->lock, flags); + + return status; +} + +static void eth_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *p) +{ + struct eth_dev *dev = netdev_priv(net); + + strlcpy(p->driver, "g_ether", sizeof p->driver); + strlcpy(p->version, UETH__VERSION, sizeof p->version); + strlcpy(p->fw_version, dev->gadget->name, sizeof p->fw_version); + strlcpy(p->bus_info, dev_name(&dev->gadget->dev), sizeof p->bus_info); +} + +/* REVISIT can also support: + * - WOL (by tracking suspends and issuing remote wakeup) + * - msglevel (implies updated messaging) + * - ... probably more ethtool ops + */ + +static const struct ethtool_ops ops = { + .get_drvinfo = eth_get_drvinfo, + .get_link = ethtool_op_get_link, +}; + +static void defer_kevent(struct eth_dev *dev, int flag) +{ + if (test_and_set_bit(flag, &dev->todo)) + return; + if (!schedule_work(&dev->work)) + ERROR(dev, "kevent %d may have been dropped\n", flag); + else + DBG(dev, "kevent %d scheduled\n", flag); +} + +static void rx_complete(struct usb_ep *ep, struct usb_request *req); + +static int +rx_submit(struct eth_dev *dev, struct usb_request *req, gfp_t gfp_flags) +{ + struct sk_buff *skb; + int retval = -ENOMEM; + size_t size = 0; + struct usb_ep *out; + unsigned long flags; + + spin_lock_irqsave(&dev->lock, flags); + if (dev->port_usb) + out = dev->port_usb->out_ep; + else + out = NULL; + spin_unlock_irqrestore(&dev->lock, flags); + + if (!out) + return -ENOTCONN; + + + /* Padding up to RX_EXTRA handles minor disagreements with host. + * Normally we use the USB "terminate on short read" convention; + * so allow up to (N*maxpacket), since that memory is normally + * already allocated. Some hardware doesn't deal well with short + * reads (e.g. DMA must be N*maxpacket), so for now don't trim a + * byte off the end (to force hardware errors on overflow). + * + * RNDIS uses internal framing, and explicitly allows senders to + * pad to end-of-packet. That's potentially nice for speed, but + * means receivers can't recover lost synch on their own (because + * new packets don't only start after a short RX). + */ + size += sizeof(struct ethhdr) + dev->net->mtu + RX_EXTRA; + size += dev->port_usb->header_len; + size += out->maxpacket - 1; + size -= size % out->maxpacket; + + if (dev->port_usb->is_fixed) + size = max_t(size_t, size, dev->port_usb->fixed_out_len); + + skb = alloc_skb(size + NET_IP_ALIGN, gfp_flags); + if (skb == NULL) { + DBG(dev, "no rx skb\n"); + goto enomem; + } + + /* Some platforms perform better when IP packets are aligned, + * but on at least one, checksumming fails otherwise. Note: + * RNDIS headers involve variable numbers of LE32 values. + */ + skb_reserve(skb, NET_IP_ALIGN); + + req->buf = skb->data; + req->length = size; + req->complete = rx_complete; + req->context = skb; + + retval = usb_ep_queue(out, req, gfp_flags); + if (retval == -ENOMEM) +enomem: + defer_kevent(dev, WORK_RX_MEMORY); + if (retval) { + DBG(dev, "rx submit --> %d\n", retval); + if (skb) + dev_kfree_skb_any(skb); + spin_lock_irqsave(&dev->req_lock, flags); + list_add(&req->list, &dev->rx_reqs); + spin_unlock_irqrestore(&dev->req_lock, flags); + } + return retval; +} + +static void rx_complete(struct usb_ep *ep, struct usb_request *req) +{ + struct sk_buff *skb = req->context, *skb2; + struct eth_dev *dev = ep->driver_data; + int status = req->status; + + switch (status) { + + /* normal completion */ + case 0: + skb_put(skb, req->actual); + + if (dev->unwrap) { + unsigned long flags; + + spin_lock_irqsave(&dev->lock, flags); + if (dev->port_usb) { + status = dev->unwrap(dev->port_usb, + skb, + &dev->rx_frames); + } else { + dev_kfree_skb_any(skb); + status = -ENOTCONN; + } + spin_unlock_irqrestore(&dev->lock, flags); + } else { + skb_queue_tail(&dev->rx_frames, skb); + } + skb = NULL; + + skb2 = skb_dequeue(&dev->rx_frames); + while (skb2) { + if (status < 0 + || ETH_HLEN > skb2->len + || skb2->len > ETH_FRAME_LEN) { + dev->net->stats.rx_errors++; + dev->net->stats.rx_length_errors++; + DBG(dev, "rx length %d\n", skb2->len); + dev_kfree_skb_any(skb2); + goto next_frame; + } + skb2->protocol = eth_type_trans(skb2, dev->net); + dev->net->stats.rx_packets++; + dev->net->stats.rx_bytes += skb2->len; + + /* no buffer copies needed, unless hardware can't + * use skb buffers. + */ + status = netif_rx(skb2); +next_frame: + skb2 = skb_dequeue(&dev->rx_frames); + } + break; + + /* software-driven interface shutdown */ + case -ECONNRESET: /* unlink */ + case -ESHUTDOWN: /* disconnect etc */ + VDBG(dev, "rx shutdown, code %d\n", status); + goto quiesce; + + /* for hardware automagic (such as pxa) */ + case -ECONNABORTED: /* endpoint reset */ + DBG(dev, "rx %s reset\n", ep->name); + defer_kevent(dev, WORK_RX_MEMORY); +quiesce: + dev_kfree_skb_any(skb); + goto clean; + + /* data overrun */ + case -EOVERFLOW: + dev->net->stats.rx_over_errors++; + /* FALLTHROUGH */ + + default: + dev->net->stats.rx_errors++; + DBG(dev, "rx status %d\n", status); + break; + } + + if (skb) + dev_kfree_skb_any(skb); + if (!netif_running(dev->net)) { +clean: + spin_lock(&dev->req_lock); + list_add(&req->list, &dev->rx_reqs); + spin_unlock(&dev->req_lock); + req = NULL; + } + if (req) + rx_submit(dev, req, GFP_ATOMIC); +} + +static int prealloc(struct list_head *list, struct usb_ep *ep, unsigned n) +{ + unsigned i; + struct usb_request *req; + + if (!n) + return -ENOMEM; + + /* queue/recycle up to N requests */ + i = n; + list_for_each_entry(req, list, list) { + if (i-- == 0) + goto extra; + } + while (i--) { + req = usb_ep_alloc_request(ep, GFP_ATOMIC); + if (!req) + return list_empty(list) ? -ENOMEM : 0; + list_add(&req->list, list); + } + return 0; + +extra: + /* free extras */ + for (;;) { + struct list_head *next; + + next = req->list.next; + list_del(&req->list); + usb_ep_free_request(ep, req); + + if (next == list) + break; + + req = container_of(next, struct usb_request, list); + } + return 0; +} + +static int alloc_requests(struct eth_dev *dev, struct gether *link, unsigned n) +{ + int status; + + spin_lock(&dev->req_lock); + status = prealloc(&dev->tx_reqs, link->in_ep, n); + if (status < 0) + goto fail; + status = prealloc(&dev->rx_reqs, link->out_ep, n); + if (status < 0) + goto fail; + goto done; +fail: + DBG(dev, "can't alloc requests\n"); +done: + spin_unlock(&dev->req_lock); + return status; +} + +static void rx_fill(struct eth_dev *dev, gfp_t gfp_flags) +{ + struct usb_request *req; + unsigned long flags; + + /* fill unused rxq slots with some skb */ + spin_lock_irqsave(&dev->req_lock, flags); + while (!list_empty(&dev->rx_reqs)) { + req = container_of(dev->rx_reqs.next, + struct usb_request, list); + list_del_init(&req->list); + spin_unlock_irqrestore(&dev->req_lock, flags); + + if (rx_submit(dev, req, gfp_flags) < 0) { + defer_kevent(dev, WORK_RX_MEMORY); + return; + } + + spin_lock_irqsave(&dev->req_lock, flags); + } + spin_unlock_irqrestore(&dev->req_lock, flags); +} + +static void eth_work(struct work_struct *work) +{ + struct eth_dev *dev = container_of(work, struct eth_dev, work); + + if (test_and_clear_bit(WORK_RX_MEMORY, &dev->todo)) { + if (netif_running(dev->net)) + rx_fill(dev, GFP_KERNEL); + } + + if (dev->todo) + DBG(dev, "work done, flags = 0x%lx\n", dev->todo); +} + +static void tx_complete(struct usb_ep *ep, struct usb_request *req) +{ + struct sk_buff *skb = req->context; + struct eth_dev *dev = ep->driver_data; + + switch (req->status) { + default: + dev->net->stats.tx_errors++; + VDBG(dev, "tx err %d\n", req->status); + /* FALLTHROUGH */ + case -ECONNRESET: /* unlink */ + case -ESHUTDOWN: /* disconnect etc */ + break; + case 0: + dev->net->stats.tx_bytes += skb->len; + } + dev->net->stats.tx_packets++; + + spin_lock(&dev->req_lock); + list_add(&req->list, &dev->tx_reqs); + spin_unlock(&dev->req_lock); + dev_kfree_skb_any(skb); + + atomic_dec(&dev->tx_qlen); + if (netif_carrier_ok(dev->net)) + netif_wake_queue(dev->net); +} + +static inline int is_promisc(u16 cdc_filter) +{ + return cdc_filter & USB_CDC_PACKET_TYPE_PROMISCUOUS; +} + +static netdev_tx_t eth_start_xmit(struct sk_buff *skb, + struct net_device *net) +{ + struct eth_dev *dev = netdev_priv(net); + int length = skb->len; + int retval; + struct usb_request *req = NULL; + unsigned long flags; + struct usb_ep *in; + u16 cdc_filter; + + spin_lock_irqsave(&dev->lock, flags); + if (dev->port_usb) { + in = dev->port_usb->in_ep; + cdc_filter = dev->port_usb->cdc_filter; + } else { + in = NULL; + cdc_filter = 0; + } + spin_unlock_irqrestore(&dev->lock, flags); + + if (!in) { + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } + + /* apply outgoing CDC or RNDIS filters */ + if (!is_promisc(cdc_filter)) { + u8 *dest = skb->data; + + if (is_multicast_ether_addr(dest)) { + u16 type; + + /* ignores USB_CDC_PACKET_TYPE_MULTICAST and host + * SET_ETHERNET_MULTICAST_FILTERS requests + */ + if (is_broadcast_ether_addr(dest)) + type = USB_CDC_PACKET_TYPE_BROADCAST; + else + type = USB_CDC_PACKET_TYPE_ALL_MULTICAST; + if (!(cdc_filter & type)) { + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } + } + /* ignores USB_CDC_PACKET_TYPE_DIRECTED */ + } + + spin_lock_irqsave(&dev->req_lock, flags); + /* + * this freelist can be empty if an interrupt triggered disconnect() + * and reconfigured the gadget (shutting down this queue) after the + * network stack decided to xmit but before we got the spinlock. + */ + if (list_empty(&dev->tx_reqs)) { + spin_unlock_irqrestore(&dev->req_lock, flags); + return NETDEV_TX_BUSY; + } + + req = container_of(dev->tx_reqs.next, struct usb_request, list); + list_del(&req->list); + + /* temporarily stop TX queue when the freelist empties */ + if (list_empty(&dev->tx_reqs)) + netif_stop_queue(net); + spin_unlock_irqrestore(&dev->req_lock, flags); + + /* no buffer copies needed, unless the network stack did it + * or the hardware can't use skb buffers. + * or there's not enough space for extra headers we need + */ + if (dev->wrap) { + unsigned long flags; + + spin_lock_irqsave(&dev->lock, flags); + if (dev->port_usb) + skb = dev->wrap(dev->port_usb, skb); + spin_unlock_irqrestore(&dev->lock, flags); + if (!skb) + goto drop; + + length = skb->len; + } + req->buf = skb->data; + req->context = skb; + req->complete = tx_complete; + + /* NCM requires no zlp if transfer is dwNtbInMaxSize */ + if (dev->port_usb->is_fixed && + length == dev->port_usb->fixed_in_len && + (length % in->maxpacket) == 0) + req->zero = 0; + else + req->zero = 1; + + /* use zlp framing on tx for strict CDC-Ether conformance, + * though any robust network rx path ignores extra padding. + * and some hardware doesn't like to write zlps. + */ + if (req->zero && !dev->zlp && (length % in->maxpacket) == 0) + length++; + + req->length = length; + + /* throttle high/super speed IRQ rate back slightly */ + if (gadget_is_dualspeed(dev->gadget)) + req->no_interrupt = (dev->gadget->speed == USB_SPEED_HIGH || + dev->gadget->speed == USB_SPEED_SUPER) + ? ((atomic_read(&dev->tx_qlen) % qmult) != 0) + : 0; + + retval = usb_ep_queue(in, req, GFP_ATOMIC); + switch (retval) { + default: + DBG(dev, "tx queue err %d\n", retval); + break; + case 0: + net->trans_start = jiffies; + atomic_inc(&dev->tx_qlen); + } + + if (retval) { + dev_kfree_skb_any(skb); +drop: + dev->net->stats.tx_dropped++; + spin_lock_irqsave(&dev->req_lock, flags); + if (list_empty(&dev->tx_reqs)) + netif_start_queue(net); + list_add(&req->list, &dev->tx_reqs); + spin_unlock_irqrestore(&dev->req_lock, flags); + } + return NETDEV_TX_OK; +} + +/*-------------------------------------------------------------------------*/ + +static void eth_start(struct eth_dev *dev, gfp_t gfp_flags) +{ + DBG(dev, "%s\n", __func__); + + /* fill the rx queue */ + rx_fill(dev, gfp_flags); + + /* and open the tx floodgates */ + atomic_set(&dev->tx_qlen, 0); + netif_wake_queue(dev->net); +} + +static int eth_open(struct net_device *net) +{ + struct eth_dev *dev = netdev_priv(net); + struct gether *link; + + DBG(dev, "%s\n", __func__); + if (netif_carrier_ok(dev->net)) + eth_start(dev, GFP_KERNEL); + + spin_lock_irq(&dev->lock); + link = dev->port_usb; + if (link && link->open) + link->open(link); + spin_unlock_irq(&dev->lock); + + return 0; +} + +static int eth_stop(struct net_device *net) +{ + struct eth_dev *dev = netdev_priv(net); + unsigned long flags; + + VDBG(dev, "%s\n", __func__); + netif_stop_queue(net); + + DBG(dev, "stop stats: rx/tx %ld/%ld, errs %ld/%ld\n", + dev->net->stats.rx_packets, dev->net->stats.tx_packets, + dev->net->stats.rx_errors, dev->net->stats.tx_errors + ); + + /* ensure there are no more active requests */ + spin_lock_irqsave(&dev->lock, flags); + if (dev->port_usb) { + struct gether *link = dev->port_usb; + + if (link->close) + link->close(link); + + /* NOTE: we have no abort-queue primitive we could use + * to cancel all pending I/O. Instead, we disable then + * reenable the endpoints ... this idiom may leave toggle + * wrong, but that's a self-correcting error. + * + * REVISIT: we *COULD* just let the transfers complete at + * their own pace; the network stack can handle old packets. + * For the moment we leave this here, since it works. + */ + usb_ep_disable(link->in_ep); + usb_ep_disable(link->out_ep); + if (netif_carrier_ok(net)) { + DBG(dev, "host still using in/out endpoints\n"); + usb_ep_enable(link->in_ep); + usb_ep_enable(link->out_ep); + } + } + spin_unlock_irqrestore(&dev->lock, flags); + + return 0; +} + +/*-------------------------------------------------------------------------*/ + +/* initial value, changed by "ifconfig usb0 hw ether xx:xx:xx:xx:xx:xx" */ +static char *dev_addr; +module_param(dev_addr, charp, S_IRUGO); +MODULE_PARM_DESC(dev_addr, "Device Ethernet Address"); + +/* this address is invisible to ifconfig */ +static char *host_addr; +module_param(host_addr, charp, S_IRUGO); +MODULE_PARM_DESC(host_addr, "Host Ethernet Address"); + +static int get_ether_addr(const char *str, u8 *dev_addr) +{ + if (str) { + unsigned i; + + for (i = 0; i < 6; i++) { + unsigned char num; + + if ((*str == '.') || (*str == ':')) + str++; + num = hex_to_bin(*str++) << 4; + num |= hex_to_bin(*str++); + dev_addr [i] = num; + } + if (is_valid_ether_addr(dev_addr)) + return 0; + } + eth_random_addr(dev_addr); + return 1; +} + +static struct eth_dev *the_dev; + +static const struct net_device_ops eth_netdev_ops = { + .ndo_open = eth_open, + .ndo_stop = eth_stop, + .ndo_start_xmit = eth_start_xmit, + .ndo_change_mtu = ueth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, +}; + +static struct device_type gadget_type = { + .name = "gadget", +}; + +/** + * gether_setup_name - initialize one ethernet-over-usb link + * @g: gadget to associated with these links + * @ethaddr: NULL, or a buffer in which the ethernet address of the + * host side of the link is recorded + * @netname: name for network device (for example, "usb") + * Context: may sleep + * + * This sets up the single network link that may be exported by a + * gadget driver using this framework. The link layer addresses are + * set up using module parameters. + * + * Returns negative errno, or zero on success + */ +int gether_setup_name(struct usb_gadget *g, u8 ethaddr[ETH_ALEN], + const char *netname) +{ + struct eth_dev *dev; + struct net_device *net; + int status; + + if (the_dev) + return -EBUSY; + + net = alloc_etherdev(sizeof *dev); + if (!net) + return -ENOMEM; + + dev = netdev_priv(net); + spin_lock_init(&dev->lock); + spin_lock_init(&dev->req_lock); + INIT_WORK(&dev->work, eth_work); + INIT_LIST_HEAD(&dev->tx_reqs); + INIT_LIST_HEAD(&dev->rx_reqs); + + skb_queue_head_init(&dev->rx_frames); + + /* network device setup */ + dev->net = net; + snprintf(net->name, sizeof(net->name), "%s%%d", netname); + + if (get_ether_addr(dev_addr, net->dev_addr)) + dev_warn(&g->dev, + "using random %s ethernet address\n", "self"); + if (get_ether_addr(host_addr, dev->host_mac)) + dev_warn(&g->dev, + "using random %s ethernet address\n", "host"); + + if (ethaddr) + memcpy(ethaddr, dev->host_mac, ETH_ALEN); + + net->netdev_ops = ð_netdev_ops; + + SET_ETHTOOL_OPS(net, &ops); + + dev->gadget = g; + SET_NETDEV_DEV(net, &g->dev); + SET_NETDEV_DEVTYPE(net, &gadget_type); + + status = register_netdev(net); + if (status < 0) { + dev_dbg(&g->dev, "register_netdev failed, %d\n", status); + free_netdev(net); + } else { + INFO(dev, "MAC %pM\n", net->dev_addr); + INFO(dev, "HOST MAC %pM\n", dev->host_mac); + + the_dev = dev; + + /* two kinds of host-initiated state changes: + * - iff DATA transfer is active, carrier is "on" + * - tx queueing enabled if open *and* carrier is "on" + */ + netif_carrier_off(net); + } + + return status; +} + +/** + * gether_cleanup - remove Ethernet-over-USB device + * Context: may sleep + * + * This is called to free all resources allocated by @gether_setup(). + */ +void gether_cleanup(void) +{ + if (!the_dev) + return; + + unregister_netdev(the_dev->net); + flush_work_sync(&the_dev->work); + free_netdev(the_dev->net); + + the_dev = NULL; +} + + +/** + * gether_connect - notify network layer that USB link is active + * @link: the USB link, set up with endpoints, descriptors matching + * current device speed, and any framing wrapper(s) set up. + * Context: irqs blocked + * + * This is called to activate endpoints and let the network layer know + * the connection is active ("carrier detect"). It may cause the I/O + * queues to open and start letting network packets flow, but will in + * any case activate the endpoints so that they respond properly to the + * USB host. + * + * Verify net_device pointer returned using IS_ERR(). If it doesn't + * indicate some error code (negative errno), ep->driver_data values + * have been overwritten. + */ +struct net_device *gether_connect(struct gether *link) +{ + struct eth_dev *dev = the_dev; + int result = 0; + + if (!dev) + return ERR_PTR(-EINVAL); + + link->in_ep->driver_data = dev; + result = usb_ep_enable(link->in_ep); + if (result != 0) { + DBG(dev, "enable %s --> %d\n", + link->in_ep->name, result); + goto fail0; + } + + link->out_ep->driver_data = dev; + result = usb_ep_enable(link->out_ep); + if (result != 0) { + DBG(dev, "enable %s --> %d\n", + link->out_ep->name, result); + goto fail1; + } + + if (result == 0) + result = alloc_requests(dev, link, qlen(dev->gadget)); + + if (result == 0) { + dev->zlp = link->is_zlp_ok; + DBG(dev, "qlen %d\n", qlen(dev->gadget)); + + dev->header_len = link->header_len; + dev->unwrap = link->unwrap; + dev->wrap = link->wrap; + + spin_lock(&dev->lock); + dev->port_usb = link; + link->ioport = dev; + if (netif_running(dev->net)) { + if (link->open) + link->open(link); + } else { + if (link->close) + link->close(link); + } + spin_unlock(&dev->lock); + + netif_carrier_on(dev->net); + if (netif_running(dev->net)) + eth_start(dev, GFP_ATOMIC); + + /* on error, disable any endpoints */ + } else { + (void) usb_ep_disable(link->out_ep); +fail1: + (void) usb_ep_disable(link->in_ep); + } +fail0: + /* caller is responsible for cleanup on error */ + if (result < 0) + return ERR_PTR(result); + return dev->net; +} + +/** + * gether_disconnect - notify network layer that USB link is inactive + * @link: the USB link, on which gether_connect() was called + * Context: irqs blocked + * + * This is called to deactivate endpoints and let the network layer know + * the connection went inactive ("no carrier"). + * + * On return, the state is as if gether_connect() had never been called. + * The endpoints are inactive, and accordingly without active USB I/O. + * Pointers to endpoint descriptors and endpoint private data are nulled. + */ +void gether_disconnect(struct gether *link) +{ + struct eth_dev *dev = link->ioport; + struct usb_request *req; + + WARN_ON(!dev); + if (!dev) + return; + + DBG(dev, "%s\n", __func__); + + netif_stop_queue(dev->net); + netif_carrier_off(dev->net); + + /* disable endpoints, forcing (synchronous) completion + * of all pending i/o. then free the request objects + * and forget about the endpoints. + */ + usb_ep_disable(link->in_ep); + spin_lock(&dev->req_lock); + while (!list_empty(&dev->tx_reqs)) { + req = container_of(dev->tx_reqs.next, + struct usb_request, list); + list_del(&req->list); + + spin_unlock(&dev->req_lock); + usb_ep_free_request(link->in_ep, req); + spin_lock(&dev->req_lock); + } + spin_unlock(&dev->req_lock); + link->in_ep->driver_data = NULL; + link->in_ep->desc = NULL; + + usb_ep_disable(link->out_ep); + spin_lock(&dev->req_lock); + while (!list_empty(&dev->rx_reqs)) { + req = container_of(dev->rx_reqs.next, + struct usb_request, list); + list_del(&req->list); + + spin_unlock(&dev->req_lock); + usb_ep_free_request(link->out_ep, req); + spin_lock(&dev->req_lock); + } + spin_unlock(&dev->req_lock); + link->out_ep->driver_data = NULL; + link->out_ep->desc = NULL; + + /* finish forgetting about this USB link episode */ + dev->header_len = 0; + dev->unwrap = NULL; + dev->wrap = NULL; + + spin_lock(&dev->lock); + dev->port_usb = NULL; + link->ioport = NULL; + spin_unlock(&dev->lock); +} diff --git a/drivers/staging/ccg/u_ether.h b/drivers/staging/ccg/u_ether.h new file mode 100644 index 000000000000..6f4a1623d854 --- /dev/null +++ b/drivers/staging/ccg/u_ether.h @@ -0,0 +1,154 @@ +/* + * u_ether.h -- interface to USB gadget "ethernet link" utilities + * + * Copyright (C) 2003-2005,2008 David Brownell + * Copyright (C) 2003-2004 Robert Schwebel, Benedikt Spranger + * Copyright (C) 2008 Nokia Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __U_ETHER_H +#define __U_ETHER_H + +#include <linux/err.h> +#include <linux/if_ether.h> +#include <linux/usb/composite.h> +#include <linux/usb/cdc.h> + +#include "gadget_chips.h" + + +/* + * This represents the USB side of an "ethernet" link, managed by a USB + * function which provides control and (maybe) framing. Two functions + * in different configurations could share the same ethernet link/netdev, + * using different host interaction models. + * + * There is a current limitation that only one instance of this link may + * be present in any given configuration. When that's a problem, network + * layer facilities can be used to package multiple logical links on this + * single "physical" one. + */ +struct gether { + struct usb_function func; + + /* updated by gether_{connect,disconnect} */ + struct eth_dev *ioport; + + /* endpoints handle full and/or high speeds */ + struct usb_ep *in_ep; + struct usb_ep *out_ep; + + bool is_zlp_ok; + + u16 cdc_filter; + + /* hooks for added framing, as needed for RNDIS and EEM. */ + u32 header_len; + /* NCM requires fixed size bundles */ + bool is_fixed; + u32 fixed_out_len; + u32 fixed_in_len; + struct sk_buff *(*wrap)(struct gether *port, + struct sk_buff *skb); + int (*unwrap)(struct gether *port, + struct sk_buff *skb, + struct sk_buff_head *list); + + /* called on network open/close */ + void (*open)(struct gether *); + void (*close)(struct gether *); +}; + +#define DEFAULT_FILTER (USB_CDC_PACKET_TYPE_BROADCAST \ + |USB_CDC_PACKET_TYPE_ALL_MULTICAST \ + |USB_CDC_PACKET_TYPE_PROMISCUOUS \ + |USB_CDC_PACKET_TYPE_DIRECTED) + +/* variant of gether_setup that allows customizing network device name */ +int gether_setup_name(struct usb_gadget *g, u8 ethaddr[ETH_ALEN], + const char *netname); + +/* netdev setup/teardown as directed by the gadget driver */ +/* gether_setup - initialize one ethernet-over-usb link + * @g: gadget to associated with these links + * @ethaddr: NULL, or a buffer in which the ethernet address of the + * host side of the link is recorded + * Context: may sleep + * + * This sets up the single network link that may be exported by a + * gadget driver using this framework. The link layer addresses are + * set up using module parameters. + * + * Returns negative errno, or zero on success + */ +static inline int gether_setup(struct usb_gadget *g, u8 ethaddr[ETH_ALEN]) +{ + return gether_setup_name(g, ethaddr, "usb"); +} + +void gether_cleanup(void); + +/* connect/disconnect is handled by individual functions */ +struct net_device *gether_connect(struct gether *); +void gether_disconnect(struct gether *); + +/* Some controllers can't support CDC Ethernet (ECM) ... */ +static inline bool can_support_ecm(struct usb_gadget *gadget) +{ + if (!gadget_supports_altsettings(gadget)) + return false; + + /* Everything else is *presumably* fine ... but this is a bit + * chancy, so be **CERTAIN** there are no hardware issues with + * your controller. Add it above if it can't handle CDC. + */ + return true; +} + +/* each configuration may bind one instance of an ethernet link */ +int geth_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]); +int ecm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]); +int ncm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]); +int eem_bind_config(struct usb_configuration *c); + +#ifdef USB_ETH_RNDIS + +int rndis_bind_config_vendor(struct usb_configuration *c, u8 ethaddr[ETH_ALEN], + u32 vendorID, const char *manufacturer); + +#else + +static inline int +rndis_bind_config_vendor(struct usb_configuration *c, u8 ethaddr[ETH_ALEN], + u32 vendorID, const char *manufacturer) +{ + return 0; +} + +#endif + +/** + * rndis_bind_config - add RNDIS network link to a configuration + * @c: the configuration to support the network link + * @ethaddr: a buffer in which the ethernet address of the host side + * side of the link was recorded + * Context: single threaded during gadget setup + * + * Returns zero on success, else negative errno. + * + * Caller must have called @gether_setup(). Caller is also responsible + * for calling @gether_cleanup() before module unload. + */ +static inline int rndis_bind_config(struct usb_configuration *c, + u8 ethaddr[ETH_ALEN]) +{ + return rndis_bind_config_vendor(c, ethaddr, 0, NULL); +} + + +#endif /* __U_ETHER_H */ diff --git a/drivers/staging/ccg/u_serial.c b/drivers/staging/ccg/u_serial.c new file mode 100644 index 000000000000..5b3f5fffea92 --- /dev/null +++ b/drivers/staging/ccg/u_serial.c @@ -0,0 +1,1341 @@ +/* + * u_serial.c - utilities for USB gadget "serial port"/TTY support + * + * Copyright (C) 2003 Al Borchers (alborchers@steinerpoint.com) + * Copyright (C) 2008 David Brownell + * Copyright (C) 2008 by Nokia Corporation + * + * This code also borrows from usbserial.c, which is + * Copyright (C) 1999 - 2002 Greg Kroah-Hartman (greg@kroah.com) + * Copyright (C) 2000 Peter Berger (pberger@brimson.com) + * Copyright (C) 2000 Al Borchers (alborchers@steinerpoint.com) + * + * This software is distributed under the terms of the GNU General + * Public License ("GPL") as published by the Free Software Foundation, + * either version 2 of that License or (at your option) any later version. + */ + +/* #define VERBOSE_DEBUG */ + +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/interrupt.h> +#include <linux/device.h> +#include <linux/delay.h> +#include <linux/tty.h> +#include <linux/tty_flip.h> +#include <linux/slab.h> +#include <linux/export.h> + +#include "u_serial.h" + + +/* + * This component encapsulates the TTY layer glue needed to provide basic + * "serial port" functionality through the USB gadget stack. Each such + * port is exposed through a /dev/ttyGS* node. + * + * After initialization (gserial_setup), these TTY port devices stay + * available until they are removed (gserial_cleanup). Each one may be + * connected to a USB function (gserial_connect), or disconnected (with + * gserial_disconnect) when the USB host issues a config change event. + * Data can only flow when the port is connected to the host. + * + * A given TTY port can be made available in multiple configurations. + * For example, each one might expose a ttyGS0 node which provides a + * login application. In one case that might use CDC ACM interface 0, + * while another configuration might use interface 3 for that. The + * work to handle that (including descriptor management) is not part + * of this component. + * + * Configurations may expose more than one TTY port. For example, if + * ttyGS0 provides login service, then ttyGS1 might provide dialer access + * for a telephone or fax link. And ttyGS2 might be something that just + * needs a simple byte stream interface for some messaging protocol that + * is managed in userspace ... OBEX, PTP, and MTP have been mentioned. + */ + +#define PREFIX "ttyGS" + +/* + * gserial is the lifecycle interface, used by USB functions + * gs_port is the I/O nexus, used by the tty driver + * tty_struct links to the tty/filesystem framework + * + * gserial <---> gs_port ... links will be null when the USB link is + * inactive; managed by gserial_{connect,disconnect}(). each gserial + * instance can wrap its own USB control protocol. + * gserial->ioport == usb_ep->driver_data ... gs_port + * gs_port->port_usb ... gserial + * + * gs_port <---> tty_struct ... links will be null when the TTY file + * isn't opened; managed by gs_open()/gs_close() + * gserial->port_tty ... tty_struct + * tty_struct->driver_data ... gserial + */ + +/* RX and TX queues can buffer QUEUE_SIZE packets before they hit the + * next layer of buffering. For TX that's a circular buffer; for RX + * consider it a NOP. A third layer is provided by the TTY code. + */ +#define QUEUE_SIZE 16 +#define WRITE_BUF_SIZE 8192 /* TX only */ + +/* circular buffer */ +struct gs_buf { + unsigned buf_size; + char *buf_buf; + char *buf_get; + char *buf_put; +}; + +/* + * The port structure holds info for each port, one for each minor number + * (and thus for each /dev/ node). + */ +struct gs_port { + struct tty_port port; + spinlock_t port_lock; /* guard port_* access */ + + struct gserial *port_usb; + + bool openclose; /* open/close in progress */ + u8 port_num; + + struct list_head read_pool; + int read_started; + int read_allocated; + struct list_head read_queue; + unsigned n_read; + struct tasklet_struct push; + + struct list_head write_pool; + int write_started; + int write_allocated; + struct gs_buf port_write_buf; + wait_queue_head_t drain_wait; /* wait while writes drain */ + + /* REVISIT this state ... */ + struct usb_cdc_line_coding port_line_coding; /* 8-N-1 etc */ +}; + +/* increase N_PORTS if you need more */ +#define N_PORTS 4 +static struct portmaster { + struct mutex lock; /* protect open/close */ + struct gs_port *port; +} ports[N_PORTS]; +static unsigned n_ports; + +#define GS_CLOSE_TIMEOUT 15 /* seconds */ + + + +#ifdef VERBOSE_DEBUG +#define pr_vdebug(fmt, arg...) \ + pr_debug(fmt, ##arg) +#else +#define pr_vdebug(fmt, arg...) \ + ({ if (0) pr_debug(fmt, ##arg); }) +#endif + +/*-------------------------------------------------------------------------*/ + +/* Circular Buffer */ + +/* + * gs_buf_alloc + * + * Allocate a circular buffer and all associated memory. + */ +static int gs_buf_alloc(struct gs_buf *gb, unsigned size) +{ + gb->buf_buf = kmalloc(size, GFP_KERNEL); + if (gb->buf_buf == NULL) + return -ENOMEM; + + gb->buf_size = size; + gb->buf_put = gb->buf_buf; + gb->buf_get = gb->buf_buf; + + return 0; +} + +/* + * gs_buf_free + * + * Free the buffer and all associated memory. + */ +static void gs_buf_free(struct gs_buf *gb) +{ + kfree(gb->buf_buf); + gb->buf_buf = NULL; +} + +/* + * gs_buf_clear + * + * Clear out all data in the circular buffer. + */ +static void gs_buf_clear(struct gs_buf *gb) +{ + gb->buf_get = gb->buf_put; + /* equivalent to a get of all data available */ +} + +/* + * gs_buf_data_avail + * + * Return the number of bytes of data written into the circular + * buffer. + */ +static unsigned gs_buf_data_avail(struct gs_buf *gb) +{ + return (gb->buf_size + gb->buf_put - gb->buf_get) % gb->buf_size; +} + +/* + * gs_buf_space_avail + * + * Return the number of bytes of space available in the circular + * buffer. + */ +static unsigned gs_buf_space_avail(struct gs_buf *gb) +{ + return (gb->buf_size + gb->buf_get - gb->buf_put - 1) % gb->buf_size; +} + +/* + * gs_buf_put + * + * Copy data data from a user buffer and put it into the circular buffer. + * Restrict to the amount of space available. + * + * Return the number of bytes copied. + */ +static unsigned +gs_buf_put(struct gs_buf *gb, const char *buf, unsigned count) +{ + unsigned len; + + len = gs_buf_space_avail(gb); + if (count > len) + count = len; + + if (count == 0) + return 0; + + len = gb->buf_buf + gb->buf_size - gb->buf_put; + if (count > len) { + memcpy(gb->buf_put, buf, len); + memcpy(gb->buf_buf, buf+len, count - len); + gb->buf_put = gb->buf_buf + count - len; + } else { + memcpy(gb->buf_put, buf, count); + if (count < len) + gb->buf_put += count; + else /* count == len */ + gb->buf_put = gb->buf_buf; + } + + return count; +} + +/* + * gs_buf_get + * + * Get data from the circular buffer and copy to the given buffer. + * Restrict to the amount of data available. + * + * Return the number of bytes copied. + */ +static unsigned +gs_buf_get(struct gs_buf *gb, char *buf, unsigned count) +{ + unsigned len; + + len = gs_buf_data_avail(gb); + if (count > len) + count = len; + + if (count == 0) + return 0; + + len = gb->buf_buf + gb->buf_size - gb->buf_get; + if (count > len) { + memcpy(buf, gb->buf_get, len); + memcpy(buf+len, gb->buf_buf, count - len); + gb->buf_get = gb->buf_buf + count - len; + } else { + memcpy(buf, gb->buf_get, count); + if (count < len) + gb->buf_get += count; + else /* count == len */ + gb->buf_get = gb->buf_buf; + } + + return count; +} + +/*-------------------------------------------------------------------------*/ + +/* I/O glue between TTY (upper) and USB function (lower) driver layers */ + +/* + * gs_alloc_req + * + * Allocate a usb_request and its buffer. Returns a pointer to the + * usb_request or NULL if there is an error. + */ +struct usb_request * +gs_alloc_req(struct usb_ep *ep, unsigned len, gfp_t kmalloc_flags) +{ + struct usb_request *req; + + req = usb_ep_alloc_request(ep, kmalloc_flags); + + if (req != NULL) { + req->length = len; + req->buf = kmalloc(len, kmalloc_flags); + if (req->buf == NULL) { + usb_ep_free_request(ep, req); + return NULL; + } + } + + return req; +} + +/* + * gs_free_req + * + * Free a usb_request and its buffer. + */ +void gs_free_req(struct usb_ep *ep, struct usb_request *req) +{ + kfree(req->buf); + usb_ep_free_request(ep, req); +} + +/* + * gs_send_packet + * + * If there is data to send, a packet is built in the given + * buffer and the size is returned. If there is no data to + * send, 0 is returned. + * + * Called with port_lock held. + */ +static unsigned +gs_send_packet(struct gs_port *port, char *packet, unsigned size) +{ + unsigned len; + + len = gs_buf_data_avail(&port->port_write_buf); + if (len < size) + size = len; + if (size != 0) + size = gs_buf_get(&port->port_write_buf, packet, size); + return size; +} + +/* + * gs_start_tx + * + * This function finds available write requests, calls + * gs_send_packet to fill these packets with data, and + * continues until either there are no more write requests + * available or no more data to send. This function is + * run whenever data arrives or write requests are available. + * + * Context: caller owns port_lock; port_usb is non-null. + */ +static int gs_start_tx(struct gs_port *port) +/* +__releases(&port->port_lock) +__acquires(&port->port_lock) +*/ +{ + struct list_head *pool = &port->write_pool; + struct usb_ep *in = port->port_usb->in; + int status = 0; + bool do_tty_wake = false; + + while (!list_empty(pool)) { + struct usb_request *req; + int len; + + if (port->write_started >= QUEUE_SIZE) + break; + + req = list_entry(pool->next, struct usb_request, list); + len = gs_send_packet(port, req->buf, in->maxpacket); + if (len == 0) { + wake_up_interruptible(&port->drain_wait); + break; + } + do_tty_wake = true; + + req->length = len; + list_del(&req->list); + req->zero = (gs_buf_data_avail(&port->port_write_buf) == 0); + + pr_vdebug(PREFIX "%d: tx len=%d, 0x%02x 0x%02x 0x%02x ...\n", + port->port_num, len, *((u8 *)req->buf), + *((u8 *)req->buf+1), *((u8 *)req->buf+2)); + + /* Drop lock while we call out of driver; completions + * could be issued while we do so. Disconnection may + * happen too; maybe immediately before we queue this! + * + * NOTE that we may keep sending data for a while after + * the TTY closed (dev->ioport->port_tty is NULL). + */ + spin_unlock(&port->port_lock); + status = usb_ep_queue(in, req, GFP_ATOMIC); + spin_lock(&port->port_lock); + + if (status) { + pr_debug("%s: %s %s err %d\n", + __func__, "queue", in->name, status); + list_add(&req->list, pool); + break; + } + + port->write_started++; + + /* abort immediately after disconnect */ + if (!port->port_usb) + break; + } + + if (do_tty_wake && port->port.tty) + tty_wakeup(port->port.tty); + return status; +} + +/* + * Context: caller owns port_lock, and port_usb is set + */ +static unsigned gs_start_rx(struct gs_port *port) +/* +__releases(&port->port_lock) +__acquires(&port->port_lock) +*/ +{ + struct list_head *pool = &port->read_pool; + struct usb_ep *out = port->port_usb->out; + + while (!list_empty(pool)) { + struct usb_request *req; + int status; + struct tty_struct *tty; + + /* no more rx if closed */ + tty = port->port.tty; + if (!tty) + break; + + if (port->read_started >= QUEUE_SIZE) + break; + + req = list_entry(pool->next, struct usb_request, list); + list_del(&req->list); + req->length = out->maxpacket; + + /* drop lock while we call out; the controller driver + * may need to call us back (e.g. for disconnect) + */ + spin_unlock(&port->port_lock); + status = usb_ep_queue(out, req, GFP_ATOMIC); + spin_lock(&port->port_lock); + + if (status) { + pr_debug("%s: %s %s err %d\n", + __func__, "queue", out->name, status); + list_add(&req->list, pool); + break; + } + port->read_started++; + + /* abort immediately after disconnect */ + if (!port->port_usb) + break; + } + return port->read_started; +} + +/* + * RX tasklet takes data out of the RX queue and hands it up to the TTY + * layer until it refuses to take any more data (or is throttled back). + * Then it issues reads for any further data. + * + * If the RX queue becomes full enough that no usb_request is queued, + * the OUT endpoint may begin NAKing as soon as its FIFO fills up. + * So QUEUE_SIZE packets plus however many the FIFO holds (usually two) + * can be buffered before the TTY layer's buffers (currently 64 KB). + */ +static void gs_rx_push(unsigned long _port) +{ + struct gs_port *port = (void *)_port; + struct tty_struct *tty; + struct list_head *queue = &port->read_queue; + bool disconnect = false; + bool do_push = false; + + /* hand any queued data to the tty */ + spin_lock_irq(&port->port_lock); + tty = port->port.tty; + while (!list_empty(queue)) { + struct usb_request *req; + + req = list_first_entry(queue, struct usb_request, list); + + /* discard data if tty was closed */ + if (!tty) + goto recycle; + + /* leave data queued if tty was rx throttled */ + if (test_bit(TTY_THROTTLED, &tty->flags)) + break; + + switch (req->status) { + case -ESHUTDOWN: + disconnect = true; + pr_vdebug(PREFIX "%d: shutdown\n", port->port_num); + break; + + default: + /* presumably a transient fault */ + pr_warning(PREFIX "%d: unexpected RX status %d\n", + port->port_num, req->status); + /* FALLTHROUGH */ + case 0: + /* normal completion */ + break; + } + + /* push data to (open) tty */ + if (req->actual) { + char *packet = req->buf; + unsigned size = req->actual; + unsigned n; + int count; + + /* we may have pushed part of this packet already... */ + n = port->n_read; + if (n) { + packet += n; + size -= n; + } + + count = tty_insert_flip_string(tty, packet, size); + if (count) + do_push = true; + if (count != size) { + /* stop pushing; TTY layer can't handle more */ + port->n_read += count; + pr_vdebug(PREFIX "%d: rx block %d/%d\n", + port->port_num, + count, req->actual); + break; + } + port->n_read = 0; + } +recycle: + list_move(&req->list, &port->read_pool); + port->read_started--; + } + + /* Push from tty to ldisc; without low_latency set this is handled by + * a workqueue, so we won't get callbacks and can hold port_lock + */ + if (tty && do_push) + tty_flip_buffer_push(tty); + + + /* We want our data queue to become empty ASAP, keeping data + * in the tty and ldisc (not here). If we couldn't push any + * this time around, there may be trouble unless there's an + * implicit tty_unthrottle() call on its way... + * + * REVISIT we should probably add a timer to keep the tasklet + * from starving ... but it's not clear that case ever happens. + */ + if (!list_empty(queue) && tty) { + if (!test_bit(TTY_THROTTLED, &tty->flags)) { + if (do_push) + tasklet_schedule(&port->push); + else + pr_warning(PREFIX "%d: RX not scheduled?\n", + port->port_num); + } + } + + /* If we're still connected, refill the USB RX queue. */ + if (!disconnect && port->port_usb) + gs_start_rx(port); + + spin_unlock_irq(&port->port_lock); +} + +static void gs_read_complete(struct usb_ep *ep, struct usb_request *req) +{ + struct gs_port *port = ep->driver_data; + + /* Queue all received data until the tty layer is ready for it. */ + spin_lock(&port->port_lock); + list_add_tail(&req->list, &port->read_queue); + tasklet_schedule(&port->push); + spin_unlock(&port->port_lock); +} + +static void gs_write_complete(struct usb_ep *ep, struct usb_request *req) +{ + struct gs_port *port = ep->driver_data; + + spin_lock(&port->port_lock); + list_add(&req->list, &port->write_pool); + port->write_started--; + + switch (req->status) { + default: + /* presumably a transient fault */ + pr_warning("%s: unexpected %s status %d\n", + __func__, ep->name, req->status); + /* FALL THROUGH */ + case 0: + /* normal completion */ + gs_start_tx(port); + break; + + case -ESHUTDOWN: + /* disconnect */ + pr_vdebug("%s: %s shutdown\n", __func__, ep->name); + break; + } + + spin_unlock(&port->port_lock); +} + +static void gs_free_requests(struct usb_ep *ep, struct list_head *head, + int *allocated) +{ + struct usb_request *req; + + while (!list_empty(head)) { + req = list_entry(head->next, struct usb_request, list); + list_del(&req->list); + gs_free_req(ep, req); + if (allocated) + (*allocated)--; + } +} + +static int gs_alloc_requests(struct usb_ep *ep, struct list_head *head, + void (*fn)(struct usb_ep *, struct usb_request *), + int *allocated) +{ + int i; + struct usb_request *req; + int n = allocated ? QUEUE_SIZE - *allocated : QUEUE_SIZE; + + /* Pre-allocate up to QUEUE_SIZE transfers, but if we can't + * do quite that many this time, don't fail ... we just won't + * be as speedy as we might otherwise be. + */ + for (i = 0; i < n; i++) { + req = gs_alloc_req(ep, ep->maxpacket, GFP_ATOMIC); + if (!req) + return list_empty(head) ? -ENOMEM : 0; + req->complete = fn; + list_add_tail(&req->list, head); + if (allocated) + (*allocated)++; + } + return 0; +} + +/** + * gs_start_io - start USB I/O streams + * @dev: encapsulates endpoints to use + * Context: holding port_lock; port_tty and port_usb are non-null + * + * We only start I/O when something is connected to both sides of + * this port. If nothing is listening on the host side, we may + * be pointlessly filling up our TX buffers and FIFO. + */ +static int gs_start_io(struct gs_port *port) +{ + struct list_head *head = &port->read_pool; + struct usb_ep *ep = port->port_usb->out; + int status; + unsigned started; + + /* Allocate RX and TX I/O buffers. We can't easily do this much + * earlier (with GFP_KERNEL) because the requests are coupled to + * endpoints, as are the packet sizes we'll be using. Different + * configurations may use different endpoints with a given port; + * and high speed vs full speed changes packet sizes too. + */ + status = gs_alloc_requests(ep, head, gs_read_complete, + &port->read_allocated); + if (status) + return status; + + status = gs_alloc_requests(port->port_usb->in, &port->write_pool, + gs_write_complete, &port->write_allocated); + if (status) { + gs_free_requests(ep, head, &port->read_allocated); + return status; + } + + /* queue read requests */ + port->n_read = 0; + started = gs_start_rx(port); + + /* unblock any pending writes into our circular buffer */ + if (started) { + tty_wakeup(port->port.tty); + } else { + gs_free_requests(ep, head, &port->read_allocated); + gs_free_requests(port->port_usb->in, &port->write_pool, + &port->write_allocated); + status = -EIO; + } + + return status; +} + +/*-------------------------------------------------------------------------*/ + +/* TTY Driver */ + +/* + * gs_open sets up the link between a gs_port and its associated TTY. + * That link is broken *only* by TTY close(), and all driver methods + * know that. + */ +static int gs_open(struct tty_struct *tty, struct file *file) +{ + int port_num = tty->index; + struct gs_port *port; + int status; + + do { + mutex_lock(&ports[port_num].lock); + port = ports[port_num].port; + if (!port) + status = -ENODEV; + else { + spin_lock_irq(&port->port_lock); + + /* already open? Great. */ + if (port->port.count) { + status = 0; + port->port.count++; + + /* currently opening/closing? wait ... */ + } else if (port->openclose) { + status = -EBUSY; + + /* ... else we do the work */ + } else { + status = -EAGAIN; + port->openclose = true; + } + spin_unlock_irq(&port->port_lock); + } + mutex_unlock(&ports[port_num].lock); + + switch (status) { + default: + /* fully handled */ + return status; + case -EAGAIN: + /* must do the work */ + break; + case -EBUSY: + /* wait for EAGAIN task to finish */ + msleep(1); + /* REVISIT could have a waitchannel here, if + * concurrent open performance is important + */ + break; + } + } while (status != -EAGAIN); + + /* Do the "real open" */ + spin_lock_irq(&port->port_lock); + + /* allocate circular buffer on first open */ + if (port->port_write_buf.buf_buf == NULL) { + + spin_unlock_irq(&port->port_lock); + status = gs_buf_alloc(&port->port_write_buf, WRITE_BUF_SIZE); + spin_lock_irq(&port->port_lock); + + if (status) { + pr_debug("gs_open: ttyGS%d (%p,%p) no buffer\n", + port->port_num, tty, file); + port->openclose = false; + goto exit_unlock_port; + } + } + + /* REVISIT if REMOVED (ports[].port NULL), abort the open + * to let rmmod work faster (but this way isn't wrong). + */ + + /* REVISIT maybe wait for "carrier detect" */ + + tty->driver_data = port; + port->port.tty = tty; + + port->port.count = 1; + port->openclose = false; + + /* if connected, start the I/O stream */ + if (port->port_usb) { + struct gserial *gser = port->port_usb; + + pr_debug("gs_open: start ttyGS%d\n", port->port_num); + gs_start_io(port); + + if (gser->connect) + gser->connect(gser); + } + + pr_debug("gs_open: ttyGS%d (%p,%p)\n", port->port_num, tty, file); + + status = 0; + +exit_unlock_port: + spin_unlock_irq(&port->port_lock); + return status; +} + +static int gs_writes_finished(struct gs_port *p) +{ + int cond; + + /* return true on disconnect or empty buffer */ + spin_lock_irq(&p->port_lock); + cond = (p->port_usb == NULL) || !gs_buf_data_avail(&p->port_write_buf); + spin_unlock_irq(&p->port_lock); + + return cond; +} + +static void gs_close(struct tty_struct *tty, struct file *file) +{ + struct gs_port *port = tty->driver_data; + struct gserial *gser; + + spin_lock_irq(&port->port_lock); + + if (port->port.count != 1) { + if (port->port.count == 0) + WARN_ON(1); + else + --port->port.count; + goto exit; + } + + pr_debug("gs_close: ttyGS%d (%p,%p) ...\n", port->port_num, tty, file); + + /* mark port as closing but in use; we can drop port lock + * and sleep if necessary + */ + port->openclose = true; + port->port.count = 0; + + gser = port->port_usb; + if (gser && gser->disconnect) + gser->disconnect(gser); + + /* wait for circular write buffer to drain, disconnect, or at + * most GS_CLOSE_TIMEOUT seconds; then discard the rest + */ + if (gs_buf_data_avail(&port->port_write_buf) > 0 && gser) { + spin_unlock_irq(&port->port_lock); + wait_event_interruptible_timeout(port->drain_wait, + gs_writes_finished(port), + GS_CLOSE_TIMEOUT * HZ); + spin_lock_irq(&port->port_lock); + gser = port->port_usb; + } + + /* Iff we're disconnected, there can be no I/O in flight so it's + * ok to free the circular buffer; else just scrub it. And don't + * let the push tasklet fire again until we're re-opened. + */ + if (gser == NULL) + gs_buf_free(&port->port_write_buf); + else + gs_buf_clear(&port->port_write_buf); + + tty->driver_data = NULL; + port->port.tty = NULL; + + port->openclose = false; + + pr_debug("gs_close: ttyGS%d (%p,%p) done!\n", + port->port_num, tty, file); + + wake_up_interruptible(&port->port.close_wait); +exit: + spin_unlock_irq(&port->port_lock); +} + +static int gs_write(struct tty_struct *tty, const unsigned char *buf, int count) +{ + struct gs_port *port = tty->driver_data; + unsigned long flags; + int status; + + pr_vdebug("gs_write: ttyGS%d (%p) writing %d bytes\n", + port->port_num, tty, count); + + spin_lock_irqsave(&port->port_lock, flags); + if (count) + count = gs_buf_put(&port->port_write_buf, buf, count); + /* treat count == 0 as flush_chars() */ + if (port->port_usb) + status = gs_start_tx(port); + spin_unlock_irqrestore(&port->port_lock, flags); + + return count; +} + +static int gs_put_char(struct tty_struct *tty, unsigned char ch) +{ + struct gs_port *port = tty->driver_data; + unsigned long flags; + int status; + + pr_vdebug("gs_put_char: (%d,%p) char=0x%x, called from %pf\n", + port->port_num, tty, ch, __builtin_return_address(0)); + + spin_lock_irqsave(&port->port_lock, flags); + status = gs_buf_put(&port->port_write_buf, &ch, 1); + spin_unlock_irqrestore(&port->port_lock, flags); + + return status; +} + +static void gs_flush_chars(struct tty_struct *tty) +{ + struct gs_port *port = tty->driver_data; + unsigned long flags; + + pr_vdebug("gs_flush_chars: (%d,%p)\n", port->port_num, tty); + + spin_lock_irqsave(&port->port_lock, flags); + if (port->port_usb) + gs_start_tx(port); + spin_unlock_irqrestore(&port->port_lock, flags); +} + +static int gs_write_room(struct tty_struct *tty) +{ + struct gs_port *port = tty->driver_data; + unsigned long flags; + int room = 0; + + spin_lock_irqsave(&port->port_lock, flags); + if (port->port_usb) + room = gs_buf_space_avail(&port->port_write_buf); + spin_unlock_irqrestore(&port->port_lock, flags); + + pr_vdebug("gs_write_room: (%d,%p) room=%d\n", + port->port_num, tty, room); + + return room; +} + +static int gs_chars_in_buffer(struct tty_struct *tty) +{ + struct gs_port *port = tty->driver_data; + unsigned long flags; + int chars = 0; + + spin_lock_irqsave(&port->port_lock, flags); + chars = gs_buf_data_avail(&port->port_write_buf); + spin_unlock_irqrestore(&port->port_lock, flags); + + pr_vdebug("gs_chars_in_buffer: (%d,%p) chars=%d\n", + port->port_num, tty, chars); + + return chars; +} + +/* undo side effects of setting TTY_THROTTLED */ +static void gs_unthrottle(struct tty_struct *tty) +{ + struct gs_port *port = tty->driver_data; + unsigned long flags; + + spin_lock_irqsave(&port->port_lock, flags); + if (port->port_usb) { + /* Kickstart read queue processing. We don't do xon/xoff, + * rts/cts, or other handshaking with the host, but if the + * read queue backs up enough we'll be NAKing OUT packets. + */ + tasklet_schedule(&port->push); + pr_vdebug(PREFIX "%d: unthrottle\n", port->port_num); + } + spin_unlock_irqrestore(&port->port_lock, flags); +} + +static int gs_break_ctl(struct tty_struct *tty, int duration) +{ + struct gs_port *port = tty->driver_data; + int status = 0; + struct gserial *gser; + + pr_vdebug("gs_break_ctl: ttyGS%d, send break (%d) \n", + port->port_num, duration); + + spin_lock_irq(&port->port_lock); + gser = port->port_usb; + if (gser && gser->send_break) + status = gser->send_break(gser, duration); + spin_unlock_irq(&port->port_lock); + + return status; +} + +static const struct tty_operations gs_tty_ops = { + .open = gs_open, + .close = gs_close, + .write = gs_write, + .put_char = gs_put_char, + .flush_chars = gs_flush_chars, + .write_room = gs_write_room, + .chars_in_buffer = gs_chars_in_buffer, + .unthrottle = gs_unthrottle, + .break_ctl = gs_break_ctl, +}; + +/*-------------------------------------------------------------------------*/ + +static struct tty_driver *gs_tty_driver; + +static int +gs_port_alloc(unsigned port_num, struct usb_cdc_line_coding *coding) +{ + struct gs_port *port; + + port = kzalloc(sizeof(struct gs_port), GFP_KERNEL); + if (port == NULL) + return -ENOMEM; + + tty_port_init(&port->port); + spin_lock_init(&port->port_lock); + init_waitqueue_head(&port->drain_wait); + + tasklet_init(&port->push, gs_rx_push, (unsigned long) port); + + INIT_LIST_HEAD(&port->read_pool); + INIT_LIST_HEAD(&port->read_queue); + INIT_LIST_HEAD(&port->write_pool); + + port->port_num = port_num; + port->port_line_coding = *coding; + + ports[port_num].port = port; + + return 0; +} + +/** + * gserial_setup - initialize TTY driver for one or more ports + * @g: gadget to associate with these ports + * @count: how many ports to support + * Context: may sleep + * + * The TTY stack needs to know in advance how many devices it should + * plan to manage. Use this call to set up the ports you will be + * exporting through USB. Later, connect them to functions based + * on what configuration is activated by the USB host; and disconnect + * them as appropriate. + * + * An example would be a two-configuration device in which both + * configurations expose port 0, but through different functions. + * One configuration could even expose port 1 while the other + * one doesn't. + * + * Returns negative errno or zero. + */ +int gserial_setup(struct usb_gadget *g, unsigned count) +{ + unsigned i; + struct usb_cdc_line_coding coding; + int status; + + if (count == 0 || count > N_PORTS) + return -EINVAL; + + gs_tty_driver = alloc_tty_driver(count); + if (!gs_tty_driver) + return -ENOMEM; + + gs_tty_driver->driver_name = "g_serial"; + gs_tty_driver->name = PREFIX; + /* uses dynamically assigned dev_t values */ + + gs_tty_driver->type = TTY_DRIVER_TYPE_SERIAL; + gs_tty_driver->subtype = SERIAL_TYPE_NORMAL; + gs_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; + gs_tty_driver->init_termios = tty_std_termios; + + /* 9600-8-N-1 ... matches defaults expected by "usbser.sys" on + * MS-Windows. Otherwise, most of these flags shouldn't affect + * anything unless we were to actually hook up to a serial line. + */ + gs_tty_driver->init_termios.c_cflag = + B9600 | CS8 | CREAD | HUPCL | CLOCAL; + gs_tty_driver->init_termios.c_ispeed = 9600; + gs_tty_driver->init_termios.c_ospeed = 9600; + + coding.dwDTERate = cpu_to_le32(9600); + coding.bCharFormat = 8; + coding.bParityType = USB_CDC_NO_PARITY; + coding.bDataBits = USB_CDC_1_STOP_BITS; + + tty_set_operations(gs_tty_driver, &gs_tty_ops); + + /* make devices be openable */ + for (i = 0; i < count; i++) { + mutex_init(&ports[i].lock); + status = gs_port_alloc(i, &coding); + if (status) { + count = i; + goto fail; + } + } + n_ports = count; + + /* export the driver ... */ + status = tty_register_driver(gs_tty_driver); + if (status) { + pr_err("%s: cannot register, err %d\n", + __func__, status); + goto fail; + } + + /* ... and sysfs class devices, so mdev/udev make /dev/ttyGS* */ + for (i = 0; i < count; i++) { + struct device *tty_dev; + + tty_dev = tty_register_device(gs_tty_driver, i, &g->dev); + if (IS_ERR(tty_dev)) + pr_warning("%s: no classdev for port %d, err %ld\n", + __func__, i, PTR_ERR(tty_dev)); + } + + pr_debug("%s: registered %d ttyGS* device%s\n", __func__, + count, (count == 1) ? "" : "s"); + + return status; +fail: + while (count--) + kfree(ports[count].port); + put_tty_driver(gs_tty_driver); + gs_tty_driver = NULL; + return status; +} + +static int gs_closed(struct gs_port *port) +{ + int cond; + + spin_lock_irq(&port->port_lock); + cond = (port->port.count == 0) && !port->openclose; + spin_unlock_irq(&port->port_lock); + return cond; +} + +/** + * gserial_cleanup - remove TTY-over-USB driver and devices + * Context: may sleep + * + * This is called to free all resources allocated by @gserial_setup(). + * Accordingly, it may need to wait until some open /dev/ files have + * closed. + * + * The caller must have issued @gserial_disconnect() for any ports + * that had previously been connected, so that there is never any + * I/O pending when it's called. + */ +void gserial_cleanup(void) +{ + unsigned i; + struct gs_port *port; + + if (!gs_tty_driver) + return; + + /* start sysfs and /dev/ttyGS* node removal */ + for (i = 0; i < n_ports; i++) + tty_unregister_device(gs_tty_driver, i); + + for (i = 0; i < n_ports; i++) { + /* prevent new opens */ + mutex_lock(&ports[i].lock); + port = ports[i].port; + ports[i].port = NULL; + mutex_unlock(&ports[i].lock); + + tasklet_kill(&port->push); + + /* wait for old opens to finish */ + wait_event(port->port.close_wait, gs_closed(port)); + + WARN_ON(port->port_usb != NULL); + + kfree(port); + } + n_ports = 0; + + tty_unregister_driver(gs_tty_driver); + put_tty_driver(gs_tty_driver); + gs_tty_driver = NULL; + + pr_debug("%s: cleaned up ttyGS* support\n", __func__); +} + +/** + * gserial_connect - notify TTY I/O glue that USB link is active + * @gser: the function, set up with endpoints and descriptors + * @port_num: which port is active + * Context: any (usually from irq) + * + * This is called activate endpoints and let the TTY layer know that + * the connection is active ... not unlike "carrier detect". It won't + * necessarily start I/O queues; unless the TTY is held open by any + * task, there would be no point. However, the endpoints will be + * activated so the USB host can perform I/O, subject to basic USB + * hardware flow control. + * + * Caller needs to have set up the endpoints and USB function in @dev + * before calling this, as well as the appropriate (speed-specific) + * endpoint descriptors, and also have set up the TTY driver by calling + * @gserial_setup(). + * + * Returns negative errno or zero. + * On success, ep->driver_data will be overwritten. + */ +int gserial_connect(struct gserial *gser, u8 port_num) +{ + struct gs_port *port; + unsigned long flags; + int status; + + if (!gs_tty_driver || port_num >= n_ports) + return -ENXIO; + + /* we "know" gserial_cleanup() hasn't been called */ + port = ports[port_num].port; + + /* activate the endpoints */ + status = usb_ep_enable(gser->in); + if (status < 0) + return status; + gser->in->driver_data = port; + + status = usb_ep_enable(gser->out); + if (status < 0) + goto fail_out; + gser->out->driver_data = port; + + /* then tell the tty glue that I/O can work */ + spin_lock_irqsave(&port->port_lock, flags); + gser->ioport = port; + port->port_usb = gser; + + /* REVISIT unclear how best to handle this state... + * we don't really couple it with the Linux TTY. + */ + gser->port_line_coding = port->port_line_coding; + + /* REVISIT if waiting on "carrier detect", signal. */ + + /* if it's already open, start I/O ... and notify the serial + * protocol about open/close status (connect/disconnect). + */ + if (port->port.count) { + pr_debug("gserial_connect: start ttyGS%d\n", port->port_num); + gs_start_io(port); + if (gser->connect) + gser->connect(gser); + } else { + if (gser->disconnect) + gser->disconnect(gser); + } + + spin_unlock_irqrestore(&port->port_lock, flags); + + return status; + +fail_out: + usb_ep_disable(gser->in); + gser->in->driver_data = NULL; + return status; +} + +/** + * gserial_disconnect - notify TTY I/O glue that USB link is inactive + * @gser: the function, on which gserial_connect() was called + * Context: any (usually from irq) + * + * This is called to deactivate endpoints and let the TTY layer know + * that the connection went inactive ... not unlike "hangup". + * + * On return, the state is as if gserial_connect() had never been called; + * there is no active USB I/O on these endpoints. + */ +void gserial_disconnect(struct gserial *gser) +{ + struct gs_port *port = gser->ioport; + unsigned long flags; + + if (!port) + return; + + /* tell the TTY glue not to do I/O here any more */ + spin_lock_irqsave(&port->port_lock, flags); + + /* REVISIT as above: how best to track this? */ + port->port_line_coding = gser->port_line_coding; + + port->port_usb = NULL; + gser->ioport = NULL; + if (port->port.count > 0 || port->openclose) { + wake_up_interruptible(&port->drain_wait); + if (port->port.tty) + tty_hangup(port->port.tty); + } + spin_unlock_irqrestore(&port->port_lock, flags); + + /* disable endpoints, aborting down any active I/O */ + usb_ep_disable(gser->out); + gser->out->driver_data = NULL; + + usb_ep_disable(gser->in); + gser->in->driver_data = NULL; + + /* finally, free any unused/unusable I/O buffers */ + spin_lock_irqsave(&port->port_lock, flags); + if (port->port.count == 0 && !port->openclose) + gs_buf_free(&port->port_write_buf); + gs_free_requests(gser->out, &port->read_pool, NULL); + gs_free_requests(gser->out, &port->read_queue, NULL); + gs_free_requests(gser->in, &port->write_pool, NULL); + + port->read_allocated = port->read_started = + port->write_allocated = port->write_started = 0; + + spin_unlock_irqrestore(&port->port_lock, flags); +} diff --git a/drivers/staging/ccg/u_serial.h b/drivers/staging/ccg/u_serial.h new file mode 100644 index 000000000000..9b0fe6450fbf --- /dev/null +++ b/drivers/staging/ccg/u_serial.h @@ -0,0 +1,65 @@ +/* + * u_serial.h - interface to USB gadget "serial port"/TTY utilities + * + * Copyright (C) 2008 David Brownell + * Copyright (C) 2008 by Nokia Corporation + * + * This software is distributed under the terms of the GNU General + * Public License ("GPL") as published by the Free Software Foundation, + * either version 2 of that License or (at your option) any later version. + */ + +#ifndef __U_SERIAL_H +#define __U_SERIAL_H + +#include <linux/usb/composite.h> +#include <linux/usb/cdc.h> + +/* + * One non-multiplexed "serial" I/O port ... there can be several of these + * on any given USB peripheral device, if it provides enough endpoints. + * + * The "u_serial" utility component exists to do one thing: manage TTY + * style I/O using the USB peripheral endpoints listed here, including + * hookups to sysfs and /dev for each logical "tty" device. + * + * REVISIT at least ACM could support tiocmget() if needed. + * + * REVISIT someday, allow multiplexing several TTYs over these endpoints. + */ +struct gserial { + struct usb_function func; + + /* port is managed by gserial_{connect,disconnect} */ + struct gs_port *ioport; + + struct usb_ep *in; + struct usb_ep *out; + + /* REVISIT avoid this CDC-ACM support harder ... */ + struct usb_cdc_line_coding port_line_coding; /* 9600-8-N-1 etc */ + + /* notification callbacks */ + void (*connect)(struct gserial *p); + void (*disconnect)(struct gserial *p); + int (*send_break)(struct gserial *p, int duration); +}; + +/* utilities to allocate/free request and buffer */ +struct usb_request *gs_alloc_req(struct usb_ep *ep, unsigned len, gfp_t flags); +void gs_free_req(struct usb_ep *, struct usb_request *req); + +/* port setup/teardown is handled by gadget driver */ +int gserial_setup(struct usb_gadget *g, unsigned n_ports); +void gserial_cleanup(void); + +/* connect/disconnect is handled by individual functions */ +int gserial_connect(struct gserial *, u8 port_num); +void gserial_disconnect(struct gserial *); + +/* functions are bound to configurations by a config or gadget driver */ +int acm_bind_config(struct usb_configuration *c, u8 port_num); +int gser_bind_config(struct usb_configuration *c, u8 port_num); +int obex_bind_config(struct usb_configuration *c, u8 port_num); + +#endif /* __U_SERIAL_H */ diff --git a/drivers/staging/ccg/usbstring.c b/drivers/staging/ccg/usbstring.c new file mode 100644 index 000000000000..4d25b9009edf --- /dev/null +++ b/drivers/staging/ccg/usbstring.c @@ -0,0 +1,71 @@ +/* + * Copyright (C) 2003 David Brownell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU Lesser General Public License as published + * by the Free Software Foundation; either version 2.1 of the License, or + * (at your option) any later version. + */ + +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/string.h> +#include <linux/device.h> +#include <linux/init.h> +#include <linux/nls.h> + +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> + + +/** + * usb_gadget_get_string - fill out a string descriptor + * @table: of c strings encoded using UTF-8 + * @id: string id, from low byte of wValue in get string descriptor + * @buf: at least 256 bytes, must be 16-bit aligned + * + * Finds the UTF-8 string matching the ID, and converts it into a + * string descriptor in utf16-le. + * Returns length of descriptor (always even) or negative errno + * + * If your driver needs stings in multiple languages, you'll probably + * "switch (wIndex) { ... }" in your ep0 string descriptor logic, + * using this routine after choosing which set of UTF-8 strings to use. + * Note that US-ASCII is a strict subset of UTF-8; any string bytes with + * the eighth bit set will be multibyte UTF-8 characters, not ISO-8859/1 + * characters (which are also widely used in C strings). + */ +int +usb_gadget_get_string (struct usb_gadget_strings *table, int id, u8 *buf) +{ + struct usb_string *s; + int len; + + /* descriptor 0 has the language id */ + if (id == 0) { + buf [0] = 4; + buf [1] = USB_DT_STRING; + buf [2] = (u8) table->language; + buf [3] = (u8) (table->language >> 8); + return 4; + } + for (s = table->strings; s && s->s; s++) + if (s->id == id) + break; + + /* unrecognized: stall. */ + if (!s || !s->s) + return -EINVAL; + + /* string descriptors have length, tag, then UTF16-LE text */ + len = min ((size_t) 126, strlen (s->s)); + len = utf8s_to_utf16s(s->s, len, UTF16_LITTLE_ENDIAN, + (wchar_t *) &buf[2], 126); + if (len < 0) + return -EINVAL; + buf [0] = (len + 1) * 2; + buf [1] = USB_DT_STRING; + return buf [0]; +} + diff --git a/drivers/staging/keucr/usb.c b/drivers/staging/keucr/usb.c index 483303402735..55a0b82c6391 100644 --- a/drivers/staging/keucr/usb.c +++ b/drivers/staging/keucr/usb.c @@ -320,7 +320,7 @@ static int get_device_info(struct us_data *us, const struct usb_device_id *id) us->subclass = idesc->bInterfaceSubClass; us->protocol = idesc->bInterfaceProtocol; - us->fflags = USB_US_ORIG_FLAGS(id->driver_info); + us->fflags = id->driver_info; us->Power_IsResum = false; if (us->fflags & US_FL_IGNORE_DEVICE) diff --git a/drivers/staging/serqt_usb2/serqt_usb2.c b/drivers/staging/serqt_usb2/serqt_usb2.c index 5c969ade2eb7..099bc69ca00c 100644 --- a/drivers/staging/serqt_usb2/serqt_usb2.c +++ b/drivers/staging/serqt_usb2/serqt_usb2.c @@ -16,8 +16,6 @@ #include <linux/usb/serial.h> #include <linux/uaccess.h> -static bool debug; - /* Version Information */ #define DRIVER_VERSION "v2.14" #define DRIVER_AUTHOR "Tim Gobeli, Quatech, Inc" @@ -184,11 +182,11 @@ static int port_paranoia_check(struct usb_serial_port *port, const char *function) { if (!port) { - dbg("%s - port == NULL", function); + pr_debug("%s - port == NULL", function); return -1; } if (!port->serial) { - dbg("%s - port->serial == NULL\n", function); + pr_debug("%s - port->serial == NULL\n", function); return -1; } @@ -199,12 +197,12 @@ static int serial_paranoia_check(struct usb_serial *serial, const char *function) { if (!serial) { - dbg("%s - serial == NULL\n", function); + pr_debug("%s - serial == NULL\n", function); return -1; } if (!serial->type) { - dbg("%s - serial->type == NULL!", function); + pr_debug("%s - serial->type == NULL!", function); return -1; } @@ -274,7 +272,7 @@ static void qt_write_bulk_callback(struct urb *urb) status = urb->status; if (status) { - dbg("nonzero write bulk status received:%d\n", status); + dev_dbg(&urb->dev->dev, "nonzero write bulk status received:%d\n", status); return; } @@ -307,8 +305,8 @@ static void qt_read_bulk_callback(struct urb *urb) if (urb->status) { qt_port->ReadBulkStopped = 1; - dbg("%s - nonzero write bulk status received: %d\n", - __func__, urb->status); + dev_dbg(&urb->dev->dev, "%s - nonzero write bulk status received: %d\n", + __func__, urb->status); return; } @@ -323,21 +321,19 @@ static void qt_read_bulk_callback(struct urb *urb) /* index = MINOR(port->tty->device) - serial->minor; */ index = tty->index - serial->minor; - dbg("%s - port->RxHolding = %d\n", __func__, qt_port->RxHolding); + dev_dbg(&port->dev, "%s - port->RxHolding = %d\n", __func__, qt_port->RxHolding); if (port_paranoia_check(port, __func__) != 0) { - dbg("%s - port_paranoia_check, exiting\n", __func__); qt_port->ReadBulkStopped = 1; goto exit; } - if (!serial) { - dbg("%s - bad serial pointer, exiting\n", __func__); + if (!serial) goto exit; - } + if (qt_port->closePending == 1) { /* Were closing , stop reading */ - dbg("%s - (qt_port->closepending == 1\n", __func__); + dev_dbg(&port->dev, "%s - (qt_port->closepending == 1\n", __func__); qt_port->ReadBulkStopped = 1; goto exit; } @@ -355,8 +351,8 @@ static void qt_read_bulk_callback(struct urb *urb) if (urb->status) { qt_port->ReadBulkStopped = 1; - dbg("%s - nonzero read bulk status received: %d\n", - __func__, urb->status); + dev_dbg(&port->dev, "%s - nonzero read bulk status received: %d\n", + __func__, urb->status); goto exit; } @@ -371,7 +367,7 @@ static void qt_read_bulk_callback(struct urb *urb) case 0x00: /* line status change 4th byte must follow */ if (i > (RxCount - 4)) { - dbg("Illegal escape seuences in received data\n"); + dev_dbg(&port->dev, "Illegal escape seuences in received data\n"); break; } ProcessLineStatus(qt_port, data[i + 3]); @@ -381,9 +377,9 @@ static void qt_read_bulk_callback(struct urb *urb) case 0x01: /* Modem status status change 4th byte must follow */ - dbg("Modem status status.\n"); + dev_dbg(&port->dev, "Modem status status.\n"); if (i > (RxCount - 4)) { - dbg("Illegal escape sequences in received data\n"); + dev_dbg(&port->dev, "Illegal escape sequences in received data\n"); break; } ProcessModemStatus(qt_port, @@ -392,7 +388,7 @@ static void qt_read_bulk_callback(struct urb *urb) flag = 1; break; case 0xff: - dbg("No status sequence.\n"); + dev_dbg(&port->dev, "No status sequence.\n"); if (tty) { ProcessRxChar(tty, port, data[i]); @@ -421,8 +417,8 @@ static void qt_read_bulk_callback(struct urb *urb) qt_read_bulk_callback, port); result = usb_submit_urb(port->read_urb, GFP_ATOMIC); if (result) - dbg("%s - failed resubmitting read urb, error %d", - __func__, result); + dev_dbg(&port->dev, "%s - failed resubmitting read urb, error %d", + __func__, result); else { if (RxCount) { tty_flip_buffer_push(tty); @@ -517,7 +513,6 @@ static int qt_set_device(struct usb_serial *serial, PortSettings += ((__u16) (device_data->porta)); length = sizeof(struct qt_get_device_data); - dbg("%s - PortSettings = 0x%x\n", __func__, PortSettings); result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), QT_SET_GET_DEVICE, 0x40, PortSettings, @@ -691,6 +686,7 @@ static int BoxDisable_SW_FlowCtrl(struct usb_serial *serial, __u16 index) static int qt_startup(struct usb_serial *serial) { + struct device *dev = &serial->dev->dev; struct usb_serial_port *port; struct quatech_port *qt_port; struct qt_get_device_data DeviceData; @@ -702,8 +698,6 @@ static int qt_startup(struct usb_serial *serial) port = serial->port[i]; qt_port = kzalloc(sizeof(*qt_port), GFP_KERNEL); if (!qt_port) { - dbg("%s: kzalloc for quatech_port (%d) failed!.", - __func__, i); for (--i; i >= 0; i--) { port = serial->port[i]; kfree(usb_get_serial_port_data(port)); @@ -718,25 +712,23 @@ static int qt_startup(struct usb_serial *serial) } status = qt_get_device(serial, &DeviceData); - if (status < 0) { - dbg(__FILE__ "box_get_device failed"); + if (status < 0) goto startup_error; - } - dbg(__FILE__ "DeviceData.portb = 0x%x", DeviceData.portb); + dev_dbg(dev, "DeviceData.portb = 0x%x\n", DeviceData.portb); DeviceData.portb &= ~FULLPWRBIT; - dbg(__FILE__ "Changing DeviceData.portb to 0x%x", DeviceData.portb); + dev_dbg(dev, "Changing DeviceData.portb to 0x%x\n", DeviceData.portb); status = qt_set_device(serial, &DeviceData); if (status < 0) { - dbg(__FILE__ "qt_set_device failed\n"); + dev_dbg(dev, "qt_set_device failed\n"); goto startup_error; } status = qt_get_device(serial, &DeviceData); if (status < 0) { - dbg(__FILE__ "qt_get_device failed"); + dev_dbg(dev, "qt_get_device failed\n"); goto startup_error; } @@ -780,29 +772,27 @@ static int qt_startup(struct usb_serial *serial) status = BoxSetPrebufferLevel(serial); /* sets to default value */ if (status < 0) { - dbg(__FILE__ "BoxSetPrebufferLevel failed\n"); + dev_dbg(dev, "BoxSetPrebufferLevel failed\n"); goto startup_error; } status = BoxSetATC(serial, ATC_DISABLED); if (status < 0) { - dbg(__FILE__ "BoxSetATC failed\n"); + dev_dbg(dev, "BoxSetATC failed\n"); goto startup_error; } - dbg(__FILE__ "DeviceData.portb = 0x%x", DeviceData.portb); + dev_dbg(dev, "DeviceData.portb = 0x%x\n", DeviceData.portb); DeviceData.portb |= NEXT_BOARD_POWER_BIT; - dbg(__FILE__ "Changing DeviceData.portb to 0x%x", DeviceData.portb); + dev_dbg(dev, "Changing DeviceData.portb to 0x%x\n", DeviceData.portb); status = qt_set_device(serial, &DeviceData); if (status < 0) { - dbg(__FILE__ "qt_set_device failed\n"); + dev_dbg(dev, "qt_set_device failed\n"); goto startup_error; } - dbg("Exit Success %s\n", __func__); - return 0; startup_error: @@ -813,8 +803,6 @@ startup_error: usb_set_serial_port_data(port, NULL); } - dbg("Exit fail %s\n", __func__); - return -EIO; } @@ -869,10 +857,10 @@ static int qt_open(struct tty_struct *tty, /* Port specific setups */ result = qt_open_channel(serial, port->number, &ChannelData); if (result < 0) { - dbg(__FILE__ "qt_open_channel failed\n"); + dev_dbg(&port->dev, "qt_open_channel failed\n"); return result; } - dbg(__FILE__ "qt_open_channel completed.\n"); + dev_dbg(&port->dev, "qt_open_channel completed.\n"); /* FIXME: are these needed? Does it even do anything useful? */ quatech_port->shadowLSR = ChannelData.line_status & @@ -884,10 +872,10 @@ static int qt_open(struct tty_struct *tty, /* Set Baud rate to default and turn off (default)flow control here */ result = qt_setuart(serial, port->number, DEFAULT_DIVISOR, DEFAULT_LCR); if (result < 0) { - dbg(__FILE__ "qt_setuart failed\n"); + dev_dbg(&port->dev, "qt_setuart failed\n"); return result; } - dbg(__FILE__ "qt_setuart completed.\n"); + dev_dbg(&port->dev, "qt_setuart completed.\n"); /* * Put this here to make it responsive to stty and defaults set by @@ -922,12 +910,12 @@ static int qt_open(struct tty_struct *tty, } - dbg("port number is %d\n", port->number); - dbg("serial number is %d\n", port->serial->minor); - dbg("Bulkin endpoint is %d\n", port->bulk_in_endpointAddress); - dbg("BulkOut endpoint is %d\n", port->bulk_out_endpointAddress); - dbg("Interrupt endpoint is %d\n", port->interrupt_in_endpointAddress); - dbg("port's number in the device is %d\n", quatech_port->port_num); + dev_dbg(&port->dev, "port number is %d\n", port->number); + dev_dbg(&port->dev, "serial number is %d\n", port->serial->minor); + dev_dbg(&port->dev, "Bulkin endpoint is %d\n", port->bulk_in_endpointAddress); + dev_dbg(&port->dev, "BulkOut endpoint is %d\n", port->bulk_out_endpointAddress); + dev_dbg(&port->dev, "Interrupt endpoint is %d\n", port->interrupt_in_endpointAddress); + dev_dbg(&port->dev, "port's number in the device is %d\n", quatech_port->port_num); quatech_port->read_urb = port->read_urb; /* set up our bulk in urb */ @@ -940,7 +928,7 @@ static int qt_open(struct tty_struct *tty, quatech_port->read_urb->transfer_buffer_length, qt_read_bulk_callback, quatech_port); - dbg("qt_open: bulkin endpoint is %d\n", port->bulk_in_endpointAddress); + dev_dbg(&port->dev, "qt_open: bulkin endpoint is %d\n", port->bulk_in_endpointAddress); quatech_port->read_urb_busy = true; result = usb_submit_urb(quatech_port->read_urb, GFP_KERNEL); if (result) { @@ -974,8 +962,6 @@ static int qt_chars_in_buffer(struct tty_struct *tty) chars = port->write_urb->transfer_buffer_length; } - dbg("%s - returns %d\n", __func__, chars); - return chars; } @@ -997,7 +983,7 @@ static void qt_block_until_empty(struct tty_struct *tty, wait--; if (wait == 0) { - dbg("%s - TIMEOUT", __func__); + dev_dbg(&qt_port->port->dev, "%s - TIMEOUT", __func__); return; } else { wait = 30; @@ -1035,17 +1021,15 @@ static void qt_close(struct usb_serial_port *port) /* Close uart channel */ status = qt_close_channel(serial, index); if (status < 0) - dbg("%s - port %d qt_close_channel failed.\n", - __func__, port->number); + dev_dbg(&port->dev, "%s - port %d qt_close_channel failed.\n", __func__, port->number); port0->open_ports--; - dbg("qt_num_open_ports in close%d:in port%d\n", - port0->open_ports, port->number); + dev_dbg(&port->dev, "qt_num_open_ports in close%d:in port%d\n", port0->open_ports, port->number); if (port0->open_ports == 0) { if (serial->port[0]->interrupt_in_urb) { - dbg("%s", "Shutdown interrupt_in_urb\n"); + dev_dbg(&port->dev, "%s", "Shutdown interrupt_in_urb\n"); usb_kill_urb(serial->port[0]->interrupt_in_urb); } @@ -1069,14 +1053,14 @@ static int qt_write(struct tty_struct *tty, struct usb_serial_port *port, return -ENODEV; if (count == 0) { - dbg("%s - write request of 0 bytes\n", __func__); + dev_dbg(&port->dev, "%s - write request of 0 bytes\n", __func__); return 0; } /* only do something if we have a bulk out endpoint */ if (serial->num_bulk_out) { if (port->write_urb->status == -EINPROGRESS) { - dbg("%s - already writing\n", __func__); + dev_dbg(&port->dev, "%s - already writing\n", __func__); return 0; } @@ -1096,8 +1080,8 @@ static int qt_write(struct tty_struct *tty, struct usb_serial_port *port, /* send the data out the bulk port */ result = usb_submit_urb(port->write_urb, GFP_ATOMIC); if (result) - dbg("%s - failed submitting write urb, error %d\n", - __func__, result); + dev_dbg(&port->dev, "%s - failed submitting write urb, error %d\n", + __func__, result); else result = count; @@ -1116,10 +1100,8 @@ static int qt_write_room(struct tty_struct *tty) int retval = -EINVAL; - if (port_paranoia_check(port, __func__)) { - dbg("%s", "Invalid port\n"); + if (port_paranoia_check(port, __func__)) return -1; - } serial = get_usb_serial(port, __func__); @@ -1148,7 +1130,7 @@ static int qt_ioctl(struct tty_struct *tty, struct usb_serial *serial = get_usb_serial(port, __func__); unsigned int index; - dbg("%s cmd 0x%04x", __func__, cmd); + dev_dbg(&port->dev, "%s cmd 0x%04x\n", __func__, cmd); index = tty->index - serial->minor; @@ -1181,7 +1163,7 @@ static int qt_ioctl(struct tty_struct *tty, return 0; } - dbg("%s -No ioctl for that one. port = %d\n", __func__, port->number); + dev_dbg(&port->dev, "%s -No ioctl for that one. port = %d\n", __func__, port->number); return -ENOIOCTLCMD; } @@ -1228,7 +1210,7 @@ static void qt_set_termios(struct tty_struct *tty, else new_LCR |= SERIAL_ONE_STOPB; - dbg("%s - 4\n", __func__); + dev_dbg(&port->dev, "%s - 4\n", __func__); /* Thats the LCR stuff, go ahead and set it */ baud = tty_get_baud_rate(tty); @@ -1236,7 +1218,7 @@ static void qt_set_termios(struct tty_struct *tty, /* pick a default, any default... */ baud = 9600; - dbg("%s - got baud = %d\n", __func__, baud); + dev_dbg(&port->dev, "%s - got baud = %d\n", __func__, baud); divisor = MAX_BAUD_RATE / baud; remainder = MAX_BAUD_RATE % baud; @@ -1250,30 +1232,28 @@ static void qt_set_termios(struct tty_struct *tty, status = qt_setuart(port->serial, index, (unsigned short)divisor, new_LCR); if (status < 0) { - dbg(__FILE__ "qt_setuart failed\n"); + dev_dbg(&port->dev, "qt_setuart failed\n"); return; } /* Now determine flow control */ if (cflag & CRTSCTS) { - dbg("%s - Enabling HW flow control port %d\n", __func__, - port->number); + dev_dbg(&port->dev, "%s - Enabling HW flow control port %d\n", __func__, port->number); /* Enable RTS/CTS flow control */ status = BoxSetHW_FlowCtrl(port->serial, index, 1); if (status < 0) { - dbg(__FILE__ "BoxSetHW_FlowCtrl failed\n"); + dev_dbg(&port->dev, "BoxSetHW_FlowCtrl failed\n"); return; } } else { /* Disable RTS/CTS flow control */ - dbg("%s - disabling HW flow control port %d\n", __func__, - port->number); + dev_dbg(&port->dev, "%s - disabling HW flow control port %d\n", __func__, port->number); status = BoxSetHW_FlowCtrl(port->serial, index, 0); if (status < 0) { - dbg(__FILE__ "BoxSetHW_FlowCtrl failed\n"); + dev_dbg(&port->dev, "BoxSetHW_FlowCtrl failed\n"); return; } @@ -1288,13 +1268,13 @@ static void qt_set_termios(struct tty_struct *tty, BoxSetSW_FlowCtrl(port->serial, index, stop_char, start_char); if (status < 0) - dbg(__FILE__ "BoxSetSW_FlowCtrl (enabled) failed\n"); + dev_dbg(&port->dev, "BoxSetSW_FlowCtrl (enabled) failed\n"); } else { /* disable SW flow control */ status = BoxDisable_SW_FlowCtrl(port->serial, index); if (status < 0) - dbg(__FILE__ "BoxSetSW_FlowCtrl (diabling) failed\n"); + dev_dbg(&port->dev, "BoxSetSW_FlowCtrl (diabling) failed\n"); } termios->c_cflag &= ~CMSPAR; @@ -1471,10 +1451,10 @@ static void qt_unthrottle(struct tty_struct *tty) mutex_lock(&qt_port->lock); if (qt_port->RxHolding == 1) { - dbg("%s -qt_port->RxHolding == 1\n", __func__); + dev_dbg(&port->dev, "%s -qt_port->RxHolding == 1\n", __func__); qt_port->RxHolding = 0; - dbg("%s - qt_port->RxHolding = 0\n", __func__); + dev_dbg(&port->dev, "%s - qt_port->RxHolding = 0\n", __func__); /* if we have a bulk endpoint, start it up */ if ((serial->num_bulk_in) && (qt_port->ReadBulkStopped == 1)) { @@ -1500,11 +1480,6 @@ static int qt_calc_num_ports(struct usb_serial *serial) { int num_ports; - dbg("numberofendpoints: %d\n", - (int)serial->interface->cur_altsetting->desc.bNumEndpoints); - dbg("numberofendpoints: %d\n", - (int)serial->interface->altsetting->desc.bNumEndpoints); - num_ports = (serial->interface->cur_altsetting->desc.bNumEndpoints - 1) / 2; @@ -1545,6 +1520,3 @@ module_usb_serial_driver(serial_drivers, id_table); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); diff --git a/drivers/staging/usbip/usbip_common.c b/drivers/staging/usbip/usbip_common.c index 891984238cdc..57f11f9cd8a5 100644 --- a/drivers/staging/usbip/usbip_common.c +++ b/drivers/staging/usbip/usbip_common.c @@ -161,8 +161,7 @@ static void usbip_dump_usb_device(struct usb_device *udev) dev_dbg(dev, "have_langid %d, string_langid %d\n", udev->have_langid, udev->string_langid); - dev_dbg(dev, "maxchild %d, children %p\n", - udev->maxchild, udev->children); + dev_dbg(dev, "maxchild %d\n", udev->maxchild); } static void usbip_dump_request_type(__u8 rt) diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index 7065df6036ca..2564b546ba8a 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -48,6 +48,7 @@ config USB_ARCH_HAS_EHCI default y if SPARC_LEON default y if ARCH_MMP default y if MACH_LOONGSON1 + default y if PLAT_ORION default PCI # some non-PCI HCDs implement xHCI diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c index d7e422dc0ef7..e1f8b2c973fe 100644 --- a/drivers/usb/atm/ueagle-atm.c +++ b/drivers/usb/atm/ueagle-atm.c @@ -307,6 +307,34 @@ enum { #define FW_GET_BYTE(p) (*((__u8 *) (p))) #define FW_DIR "ueagle-atm/" +#define EAGLE_FIRMWARE FW_DIR "eagle.fw" +#define ADI930_FIRMWARE FW_DIR "adi930.fw" +#define EAGLE_I_FIRMWARE FW_DIR "eagleI.fw" +#define EAGLE_II_FIRMWARE FW_DIR "eagleII.fw" +#define EAGLE_III_FIRMWARE FW_DIR "eagleIII.fw" +#define EAGLE_IV_FIRMWARE FW_DIR "eagleIV.fw" + +#define DSP4I_FIRMWARE FW_DIR "DSP4i.bin" +#define DSP4P_FIRMWARE FW_DIR "DSP4p.bin" +#define DSP9I_FIRMWARE FW_DIR "DSP9i.bin" +#define DSP9P_FIRMWARE FW_DIR "DSP9p.bin" +#define DSPEI_FIRMWARE FW_DIR "DSPei.bin" +#define DSPEP_FIRMWARE FW_DIR "DSPep.bin" +#define FPGA930_FIRMWARE FW_DIR "930-fpga.bin" + +#define CMV4P_FIRMWARE FW_DIR "CMV4p.bin" +#define CMV4PV2_FIRMWARE FW_DIR "CMV4p.bin.v2" +#define CMV4I_FIRMWARE FW_DIR "CMV4i.bin" +#define CMV4IV2_FIRMWARE FW_DIR "CMV4i.bin.v2" +#define CMV9P_FIRMWARE FW_DIR "CMV9p.bin" +#define CMV9PV2_FIRMWARE FW_DIR "CMV9p.bin.v2" +#define CMV9I_FIRMWARE FW_DIR "CMV9i.bin" +#define CMV9IV2_FIRMWARE FW_DIR "CMV9i.bin.v2" +#define CMVEP_FIRMWARE FW_DIR "CMVep.bin" +#define CMVEPV2_FIRMWARE FW_DIR "CMVep.bin.v2" +#define CMVEI_FIRMWARE FW_DIR "CMVei.bin" +#define CMVEIV2_FIRMWARE FW_DIR "CMVei.bin.v2" + #define UEA_FW_NAME_MAX 30 #define NB_MODEM 4 @@ -694,26 +722,26 @@ err: static int uea_load_firmware(struct usb_device *usb, unsigned int ver) { int ret; - char *fw_name = FW_DIR "eagle.fw"; + char *fw_name = EAGLE_FIRMWARE; uea_enters(usb); uea_info(usb, "pre-firmware device, uploading firmware\n"); switch (ver) { case ADI930: - fw_name = FW_DIR "adi930.fw"; + fw_name = ADI930_FIRMWARE; break; case EAGLE_I: - fw_name = FW_DIR "eagleI.fw"; + fw_name = EAGLE_I_FIRMWARE; break; case EAGLE_II: - fw_name = FW_DIR "eagleII.fw"; + fw_name = EAGLE_II_FIRMWARE; break; case EAGLE_III: - fw_name = FW_DIR "eagleIII.fw"; + fw_name = EAGLE_III_FIRMWARE; break; case EAGLE_IV: - fw_name = FW_DIR "eagleIV.fw"; + fw_name = EAGLE_IV_FIRMWARE; break; } @@ -869,19 +897,19 @@ static int request_dsp(struct uea_softc *sc) if (UEA_CHIP_VERSION(sc) == EAGLE_IV) { if (IS_ISDN(sc)) - dsp_name = FW_DIR "DSP4i.bin"; + dsp_name = DSP4I_FIRMWARE; else - dsp_name = FW_DIR "DSP4p.bin"; + dsp_name = DSP4P_FIRMWARE; } else if (UEA_CHIP_VERSION(sc) == ADI930) { if (IS_ISDN(sc)) - dsp_name = FW_DIR "DSP9i.bin"; + dsp_name = DSP9I_FIRMWARE; else - dsp_name = FW_DIR "DSP9p.bin"; + dsp_name = DSP9P_FIRMWARE; } else { if (IS_ISDN(sc)) - dsp_name = FW_DIR "DSPei.bin"; + dsp_name = DSPEI_FIRMWARE; else - dsp_name = FW_DIR "DSPep.bin"; + dsp_name = DSPEP_FIRMWARE; } ret = request_firmware(&sc->dsp_firm, dsp_name, &sc->usb_dev->dev); @@ -1925,7 +1953,7 @@ static int load_XILINX_firmware(struct uea_softc *sc) int ret, size, u, ln; const u8 *pfw; u8 value; - char *fw_name = FW_DIR "930-fpga.bin"; + char *fw_name = FPGA930_FIRMWARE; uea_enters(INS_TO_USBDEV(sc)); @@ -2753,3 +2781,28 @@ module_usb_driver(uea_driver); MODULE_AUTHOR("Damien Bergamini/Matthieu Castet/Stanislaw W. Gruszka"); MODULE_DESCRIPTION("ADI 930/Eagle USB ADSL Modem driver"); MODULE_LICENSE("Dual BSD/GPL"); +MODULE_FIRMWARE(EAGLE_FIRMWARE); +MODULE_FIRMWARE(ADI930_FIRMWARE); +MODULE_FIRMWARE(EAGLE_I_FIRMWARE); +MODULE_FIRMWARE(EAGLE_II_FIRMWARE); +MODULE_FIRMWARE(EAGLE_III_FIRMWARE); +MODULE_FIRMWARE(EAGLE_IV_FIRMWARE); +MODULE_FIRMWARE(DSP4I_FIRMWARE); +MODULE_FIRMWARE(DSP4P_FIRMWARE); +MODULE_FIRMWARE(DSP9I_FIRMWARE); +MODULE_FIRMWARE(DSP9P_FIRMWARE); +MODULE_FIRMWARE(DSPEI_FIRMWARE); +MODULE_FIRMWARE(DSPEP_FIRMWARE); +MODULE_FIRMWARE(FPGA930_FIRMWARE); +MODULE_FIRMWARE(CMV4P_FIRMWARE); +MODULE_FIRMWARE(CMV4PV2_FIRMWARE); +MODULE_FIRMWARE(CMV4I_FIRMWARE); +MODULE_FIRMWARE(CMV4IV2_FIRMWARE); +MODULE_FIRMWARE(CMV9P_FIRMWARE); +MODULE_FIRMWARE(CMV9PV2_FIRMWARE); +MODULE_FIRMWARE(CMV9I_FIRMWARE); +MODULE_FIRMWARE(CMV9IV2_FIRMWARE); +MODULE_FIRMWARE(CMVEP_FIRMWARE); +MODULE_FIRMWARE(CMVEPV2_FIRMWARE); +MODULE_FIRMWARE(CMVEI_FIRMWARE); +MODULE_FIRMWARE(CMVEIV2_FIRMWARE); diff --git a/drivers/usb/atm/usbatm.c b/drivers/usb/atm/usbatm.c index ee62b3576f94..35f10bfe15db 100644 --- a/drivers/usb/atm/usbatm.c +++ b/drivers/usb/atm/usbatm.c @@ -84,7 +84,7 @@ #include <linux/ratelimit.h> #ifdef VERBOSE_DEBUG -static int usbatm_print_packet(const unsigned char *data, int len); +static int usbatm_print_packet(struct usbatm_data *instance, const unsigned char *data, int len); #define PACKETDEBUG(arg...) usbatm_print_packet(arg) #define vdbg(arg...) dev_dbg(arg) #else @@ -230,8 +230,8 @@ static int usbatm_submit_urb(struct urb *urb) struct usbatm_channel *channel = urb->context; int ret; - vdbg("%s: submitting urb 0x%p, size %u", - __func__, urb, urb->transfer_buffer_length); + /* vdbg("%s: submitting urb 0x%p, size %u", + __func__, urb, urb->transfer_buffer_length); */ ret = usb_submit_urb(urb, GFP_ATOMIC); if (ret) { @@ -261,8 +261,8 @@ static void usbatm_complete(struct urb *urb) unsigned long flags; int status = urb->status; - vdbg("%s: urb 0x%p, status %d, actual_length %d", - __func__, urb, status, urb->actual_length); + /* vdbg("%s: urb 0x%p, status %d, actual_length %d", + __func__, urb, status, urb->actual_length); */ /* usually in_interrupt(), but not always */ spin_lock_irqsave(&channel->lock, flags); @@ -311,7 +311,7 @@ static void usbatm_extract_one_cell(struct usbatm_data *instance, unsigned char int vci = ((source[1] & 0x0f) << 12) | (source[2] << 4) | (source[3] >> 4); u8 pti = ((source[3] & 0xe) >> 1); - vdbg("%s: vpi %hd, vci %d, pti %d", __func__, vpi, vci, pti); + vdbg(&instance->usb_intf->dev, "%s: vpi %hd, vci %d, pti %d", __func__, vpi, vci, pti); if ((vci != instance->cached_vci) || (vpi != instance->cached_vpi)) { instance->cached_vpi = vpi; @@ -381,7 +381,9 @@ static void usbatm_extract_one_cell(struct usbatm_data *instance, unsigned char goto out; } - vdbg("%s: got packet (length: %u, pdu_length: %u, vcc: 0x%p)", __func__, length, pdu_length, vcc); + vdbg(&instance->usb_intf->dev, + "%s: got packet (length: %u, pdu_length: %u, vcc: 0x%p)", + __func__, length, pdu_length, vcc); if (!(skb = dev_alloc_skb(length))) { if (printk_ratelimit()) @@ -391,7 +393,9 @@ static void usbatm_extract_one_cell(struct usbatm_data *instance, unsigned char goto out; } - vdbg("%s: allocated new sk_buff (skb: 0x%p, skb->truesize: %u)", __func__, skb, skb->truesize); + vdbg(&instance->usb_intf->dev, + "%s: allocated new sk_buff (skb: 0x%p, skb->truesize: %u)", + __func__, skb, skb->truesize); if (!atm_charge(vcc, skb->truesize)) { atm_rldbg(instance, "%s: failed atm_charge (skb->truesize: %u)!\n", @@ -405,10 +409,11 @@ static void usbatm_extract_one_cell(struct usbatm_data *instance, unsigned char length); __skb_put(skb, length); - vdbg("%s: sending skb 0x%p, skb->len %u, skb->truesize %u", + vdbg(&instance->usb_intf->dev, + "%s: sending skb 0x%p, skb->len %u, skb->truesize %u", __func__, skb, skb->len, skb->truesize); - PACKETDEBUG(skb->data, skb->len); + PACKETDEBUG(instance, skb->data, skb->len); vcc->push(vcc, skb); @@ -474,7 +479,8 @@ static unsigned int usbatm_write_cells(struct usbatm_data *instance, unsigned int bytes_written; unsigned int stride = instance->tx_channel.stride; - vdbg("%s: skb->len=%d, avail_space=%u", __func__, skb->len, avail_space); + vdbg(&instance->usb_intf->dev, "%s: skb->len=%d, avail_space=%u", + __func__, skb->len, avail_space); UDSL_ASSERT(instance, !(avail_space % stride)); for (bytes_written = 0; bytes_written < avail_space && ctrl->len; @@ -534,7 +540,8 @@ static void usbatm_rx_process(unsigned long data) struct urb *urb; while ((urb = usbatm_pop_urb(&instance->rx_channel))) { - vdbg("%s: processing urb 0x%p", __func__, urb); + vdbg(&instance->usb_intf->dev, + "%s: processing urb 0x%p", __func__, urb); if (usb_pipeisoc(urb->pipe)) { unsigned char *merge_start = NULL; @@ -608,7 +615,8 @@ static void usbatm_tx_process(unsigned long data) buffer + bytes_written, buf_size - bytes_written); - vdbg("%s: wrote %u bytes from skb 0x%p to urb 0x%p", + vdbg(&instance->usb_intf->dev, + "%s: wrote %u bytes from skb 0x%p to urb 0x%p", __func__, bytes_written, skb, urb); if (!UDSL_SKB(skb)->len) { @@ -664,7 +672,8 @@ static int usbatm_atm_send(struct atm_vcc *vcc, struct sk_buff *skb) struct usbatm_control *ctrl = UDSL_SKB(skb); int err; - vdbg("%s called (skb 0x%p, len %u)", __func__, skb, skb->len); + vdbg(&instance->usb_intf->dev, "%s called (skb 0x%p, len %u)", __func__, + skb, skb->len); /* racy disconnection check - fine */ if (!instance || instance->disconnected) { @@ -688,7 +697,7 @@ static int usbatm_atm_send(struct atm_vcc *vcc, struct sk_buff *skb) goto fail; } - PACKETDEBUG(skb->data, skb->len); + PACKETDEBUG(instance, skb->data, skb->len); /* initialize the control block */ ctrl->atm.vcc = vcc; @@ -1202,7 +1211,7 @@ int usbatm_usb_probe(struct usb_interface *intf, const struct usb_device_id *id, if (i >= num_rcv_urbs) list_add_tail(&urb->urb_list, &channel->list); - vdbg("%s: alloced buffer 0x%p buf size %u urb 0x%p", + vdbg(&intf->dev, "%s: alloced buffer 0x%p buf size %u urb 0x%p", __func__, urb->transfer_buffer, urb->transfer_buffer_length, urb); } @@ -1359,7 +1368,8 @@ MODULE_VERSION(DRIVER_VERSION); ************/ #ifdef VERBOSE_DEBUG -static int usbatm_print_packet(const unsigned char *data, int len) +static int usbatm_print_packet(struct usbatm_data *instance, + const unsigned char *data, int len) { unsigned char buffer[256]; int i = 0, j = 0; @@ -1369,7 +1379,7 @@ static int usbatm_print_packet(const unsigned char *data, int len) sprintf(buffer, "%.3d :", i); for (j = 0; (j < 16) && (i < len); j++, i++) sprintf(buffer, "%s %2.2x", buffer, data[i]); - dbg("%s", buffer); + dev_dbg(&instance->usb_intf->dev, "%s", buffer); } return i; } diff --git a/drivers/usb/chipidea/Kconfig b/drivers/usb/chipidea/Kconfig index 47e499c9c0b6..1ea932a13685 100644 --- a/drivers/usb/chipidea/Kconfig +++ b/drivers/usb/chipidea/Kconfig @@ -13,7 +13,6 @@ if USB_CHIPIDEA config USB_CHIPIDEA_UDC bool "ChipIdea device controller" depends on USB_GADGET=y || USB_GADGET=USB_CHIPIDEA - select USB_GADGET_DUALSPEED help Say Y here to enable device controller functionality of the ChipIdea driver. diff --git a/drivers/usb/chipidea/Makefile b/drivers/usb/chipidea/Makefile index 5c66d9c330ca..d92ca325b104 100644 --- a/drivers/usb/chipidea/Makefile +++ b/drivers/usb/chipidea/Makefile @@ -1,3 +1,5 @@ +ccflags-$(CONFIG_USB_CHIPIDEA_DEBUG) := -DDEBUG + obj-$(CONFIG_USB_CHIPIDEA) += ci_hdrc.o ci_hdrc-y := core.o @@ -15,5 +17,5 @@ ifneq ($(CONFIG_PCI),) endif ifneq ($(CONFIG_OF_DEVICE),) - obj-$(CONFIG_USB_CHIPIDEA) += ci13xxx_imx.o + obj-$(CONFIG_USB_CHIPIDEA) += ci13xxx_imx.o usbmisc_imx6q.o endif diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h index d738603a2757..e25d1263da13 100644 --- a/drivers/usb/chipidea/ci.h +++ b/drivers/usb/chipidea/ci.h @@ -139,6 +139,7 @@ struct ci13xxx { enum ci_role role; bool is_otg; struct work_struct work; + struct work_struct vbus_work; struct workqueue_struct *wq; struct dma_pool *qh_pool; diff --git a/drivers/usb/chipidea/ci13xxx_imx.c b/drivers/usb/chipidea/ci13xxx_imx.c index ef60d06835d0..0f5ca4bea17f 100644 --- a/drivers/usb/chipidea/ci13xxx_imx.c +++ b/drivers/usb/chipidea/ci13xxx_imx.c @@ -20,8 +20,10 @@ #include <linux/usb/chipidea.h> #include <linux/clk.h> #include <linux/regulator/consumer.h> +#include <linux/pinctrl/consumer.h> #include "ci.h" +#include "ci13xxx_imx.h" #define pdev_to_phy(pdev) \ ((struct usb_phy *)platform_get_drvdata(pdev)) @@ -34,6 +36,55 @@ struct ci13xxx_imx_data { struct regulator *reg_vbus; }; +static const struct usbmisc_ops *usbmisc_ops; + +/* Common functions shared by usbmisc drivers */ + +int usbmisc_set_ops(const struct usbmisc_ops *ops) +{ + if (usbmisc_ops) + return -EBUSY; + + usbmisc_ops = ops; + + return 0; +} +EXPORT_SYMBOL_GPL(usbmisc_set_ops); + +void usbmisc_unset_ops(const struct usbmisc_ops *ops) +{ + usbmisc_ops = NULL; +} +EXPORT_SYMBOL_GPL(usbmisc_unset_ops); + +int usbmisc_get_init_data(struct device *dev, struct usbmisc_usb_device *usbdev) +{ + struct device_node *np = dev->of_node; + struct of_phandle_args args; + int ret; + + usbdev->dev = dev; + + ret = of_parse_phandle_with_args(np, "fsl,usbmisc", "#index-cells", + 0, &args); + if (ret) { + dev_err(dev, "Failed to parse property fsl,usbmisc, errno %d\n", + ret); + memset(usbdev, 0, sizeof(*usbdev)); + return ret; + } + usbdev->index = args.args[0]; + of_node_put(args.np); + + if (of_find_property(np, "disable-over-current", NULL)) + usbdev->disable_oc = 1; + + return 0; +} +EXPORT_SYMBOL_GPL(usbmisc_get_init_data); + +/* End of common functions shared by usbmisc drivers*/ + static struct ci13xxx_platform_data ci13xxx_imx_platdata __devinitdata = { .name = "ci13xxx_imx", .flags = CI13XXX_REQUIRE_TRANSCEIVER | @@ -49,8 +100,13 @@ static int __devinit ci13xxx_imx_probe(struct platform_device *pdev) struct device_node *phy_np; struct resource *res; struct regulator *reg_vbus; + struct pinctrl *pinctrl; int ret; + if (of_find_property(pdev->dev.of_node, "fsl,usbmisc", NULL) + && !usbmisc_ops) + return -EPROBE_DEFER; + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); if (!data) { dev_err(&pdev->dev, "Failed to allocate CI13xxx-IMX data!\n"); @@ -63,6 +119,11 @@ static int __devinit ci13xxx_imx_probe(struct platform_device *pdev) return -ENOENT; } + pinctrl = devm_pinctrl_get_select_default(&pdev->dev); + if (IS_ERR(pinctrl)) + dev_warn(&pdev->dev, "pinctrl get/select failed, err=%ld\n", + PTR_ERR(pinctrl)); + data->clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(data->clk)) { dev_err(&pdev->dev, @@ -120,6 +181,16 @@ static int __devinit ci13xxx_imx_probe(struct platform_device *pdev) *pdev->dev.dma_mask = DMA_BIT_MASK(32); dma_set_coherent_mask(&pdev->dev, *pdev->dev.dma_mask); } + + if (usbmisc_ops && usbmisc_ops->init) { + ret = usbmisc_ops->init(&pdev->dev); + if (ret) { + dev_err(&pdev->dev, + "usbmisc init failed, ret=%d\n", ret); + goto err; + } + } + plat_ci = ci13xxx_add_device(&pdev->dev, pdev->resource, pdev->num_resources, &ci13xxx_imx_platdata); diff --git a/drivers/usb/chipidea/ci13xxx_imx.h b/drivers/usb/chipidea/ci13xxx_imx.h new file mode 100644 index 000000000000..2e88accb3d67 --- /dev/null +++ b/drivers/usb/chipidea/ci13xxx_imx.h @@ -0,0 +1,28 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/* Used to set SoC specific callbacks */ +struct usbmisc_ops { + /* It's called once when probe a usb device */ + int (*init)(struct device *dev); +}; + +struct usbmisc_usb_device { + struct device *dev; /* usb controller device */ + int index; + + int disable_oc:1; /* over current detect disabled */ +}; + +int usbmisc_set_ops(const struct usbmisc_ops *ops); +void usbmisc_unset_ops(const struct usbmisc_ops *ops); +int +usbmisc_get_init_data(struct device *dev, struct usbmisc_usb_device *usbdev); diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c index 1083585fad00..f69d029b4607 100644 --- a/drivers/usb/chipidea/core.c +++ b/drivers/usb/chipidea/core.c @@ -273,14 +273,13 @@ static void ci_role_work(struct work_struct *work) struct ci13xxx *ci = container_of(work, struct ci13xxx, work); enum ci_role role = ci_otg_role(ci); - hw_write(ci, OP_OTGSC, OTGSC_IDIS, OTGSC_IDIS); - if (role != ci->role) { dev_dbg(ci->dev, "switching from %s to %s\n", ci_role(ci)->name, ci->roles[role]->name); ci_role_stop(ci); ci_role_start(ci, role); + enable_irq(ci->irq); } } @@ -320,17 +319,22 @@ static irqreturn_t ci_irq(int irq, void *data) { struct ci13xxx *ci = data; irqreturn_t ret = IRQ_NONE; + u32 otgsc = 0; + + if (ci->is_otg) + otgsc = hw_read(ci, OP_OTGSC, ~0); - if (ci->is_otg) { - u32 sts = hw_read(ci, OP_OTGSC, ~0); + if (ci->role != CI_ROLE_END) + ret = ci_role(ci)->irq(ci); - if (sts & OTGSC_IDIS) { - queue_work(ci->wq, &ci->work); - ret = IRQ_HANDLED; - } + if (ci->is_otg && (otgsc & OTGSC_IDIS)) { + hw_write(ci, OP_OTGSC, OTGSC_IDIS, OTGSC_IDIS); + disable_irq_nosync(ci->irq); + queue_work(ci->wq, &ci->work); + ret = IRQ_HANDLED; } - return ci->role == CI_ROLE_END ? ret : ci_role(ci)->irq(ci); + return ret; } static DEFINE_IDA(ci_ida); @@ -462,6 +466,8 @@ static int __devinit ci_hdrc_probe(struct platform_device *pdev) if (ci->roles[CI_ROLE_HOST] && ci->roles[CI_ROLE_GADGET]) { ci->is_otg = true; + /* ID pin needs 1ms debouce time, we delay 2ms for safe */ + mdelay(2); ci->role = ci_otg_role(ci); } else { ci->role = ci->roles[CI_ROLE_HOST] diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c index d214448b677e..2f45bba8561d 100644 --- a/drivers/usb/chipidea/udc.c +++ b/drivers/usb/chipidea/udc.c @@ -305,6 +305,18 @@ static u32 hw_test_and_clear_intr_active(struct ci13xxx *ci) return reg; } +static void hw_enable_vbus_intr(struct ci13xxx *ci) +{ + hw_write(ci, OP_OTGSC, OTGSC_AVVIS, OTGSC_AVVIS); + hw_write(ci, OP_OTGSC, OTGSC_AVVIE, OTGSC_AVVIE); + queue_work(ci->wq, &ci->vbus_work); +} + +static void hw_disable_vbus_intr(struct ci13xxx *ci) +{ + hw_write(ci, OP_OTGSC, OTGSC_AVVIE, 0); +} + /** * hw_test_and_clear_setup_guard: test & clear setup guard (execute without * interruption) @@ -371,6 +383,16 @@ static int hw_usb_reset(struct ci13xxx *ci) return 0; } +static void vbus_work(struct work_struct *work) +{ + struct ci13xxx *ci = container_of(work, struct ci13xxx, vbus_work); + + if (hw_read(ci, OP_OTGSC, OTGSC_AVV)) + usb_gadget_vbus_connect(&ci->gadget); + else + usb_gadget_vbus_disconnect(&ci->gadget); +} + /****************************************************************************** * UTIL block *****************************************************************************/ @@ -1370,6 +1392,7 @@ static int ci13xxx_vbus_session(struct usb_gadget *_gadget, int is_active) if (is_active) { pm_runtime_get_sync(&_gadget->dev); hw_device_reset(ci, USBMODE_CM_DC); + hw_enable_vbus_intr(ci); hw_device_state(ci, ci->ep0out->qh.dma); } else { hw_device_state(ci, 0); @@ -1544,8 +1567,10 @@ static int ci13xxx_start(struct usb_gadget *gadget, pm_runtime_get_sync(&ci->gadget.dev); if (ci->platdata->flags & CI13XXX_PULLUP_ON_VBUS) { if (ci->vbus_active) { - if (ci->platdata->flags & CI13XXX_REGS_SHARED) + if (ci->platdata->flags & CI13XXX_REGS_SHARED) { hw_device_reset(ci, USBMODE_CM_DC); + hw_enable_vbus_intr(ci); + } } else { pm_runtime_put_sync(&ci->gadget.dev); goto done; @@ -1651,6 +1676,13 @@ static irqreturn_t udc_irq(struct ci13xxx *ci) } else { retval = IRQ_NONE; } + + intr = hw_read(ci, OP_OTGSC, ~0); + hw_write(ci, OP_OTGSC, ~0, intr); + + if (intr & (OTGSC_AVVIE & OTGSC_AVVIS)) + queue_work(ci->wq, &ci->vbus_work); + spin_unlock(&ci->lock); return retval; @@ -1726,6 +1758,7 @@ static int udc_start(struct ci13xxx *ci) retval = hw_device_reset(ci, USBMODE_CM_DC); if (retval) goto put_transceiver; + hw_enable_vbus_intr(ci); } retval = device_register(&ci->gadget.dev); @@ -1788,6 +1821,9 @@ static void udc_stop(struct ci13xxx *ci) if (ci == NULL) return; + hw_disable_vbus_intr(ci); + cancel_work_sync(&ci->vbus_work); + usb_del_gadget_udc(&ci->gadget); destroy_eps(ci); @@ -1828,6 +1864,7 @@ int ci_hdrc_gadget_init(struct ci13xxx *ci) rdrv->irq = udc_irq; rdrv->name = "gadget"; ci->roles[CI_ROLE_GADGET] = rdrv; + INIT_WORK(&ci->vbus_work, vbus_work); return 0; } diff --git a/drivers/usb/chipidea/usbmisc_imx6q.c b/drivers/usb/chipidea/usbmisc_imx6q.c new file mode 100644 index 000000000000..416e3fc58fd0 --- /dev/null +++ b/drivers/usb/chipidea/usbmisc_imx6q.c @@ -0,0 +1,162 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/module.h> +#include <linux/of_platform.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/io.h> + +#include "ci13xxx_imx.h" + +#define USB_DEV_MAX 4 + +#define BM_OVER_CUR_DIS BIT(7) + +struct imx6q_usbmisc { + void __iomem *base; + spinlock_t lock; + struct clk *clk; + struct usbmisc_usb_device usbdev[USB_DEV_MAX]; +}; + +static struct imx6q_usbmisc *usbmisc; + +static struct usbmisc_usb_device *get_usbdev(struct device *dev) +{ + int i, ret; + + for (i = 0; i < USB_DEV_MAX; i++) { + if (usbmisc->usbdev[i].dev == dev) + return &usbmisc->usbdev[i]; + else if (!usbmisc->usbdev[i].dev) + break; + } + + if (i >= USB_DEV_MAX) + return ERR_PTR(-EBUSY); + + ret = usbmisc_get_init_data(dev, &usbmisc->usbdev[i]); + if (ret) + return ERR_PTR(ret); + + return &usbmisc->usbdev[i]; +} + +static int usbmisc_imx6q_init(struct device *dev) +{ + + struct usbmisc_usb_device *usbdev; + unsigned long flags; + u32 reg; + + usbdev = get_usbdev(dev); + if (IS_ERR(usbdev)) + return PTR_ERR(usbdev); + + if (usbdev->disable_oc) { + spin_lock_irqsave(&usbmisc->lock, flags); + reg = readl(usbmisc->base + usbdev->index * 4); + writel(reg | BM_OVER_CUR_DIS, + usbmisc->base + usbdev->index * 4); + spin_unlock_irqrestore(&usbmisc->lock, flags); + } + + return 0; +} + +static const struct usbmisc_ops imx6q_usbmisc_ops = { + .init = usbmisc_imx6q_init, +}; + +static const struct of_device_id usbmisc_imx6q_dt_ids[] = { + { .compatible = "fsl,imx6q-usbmisc"}, + { /* sentinel */ } +}; + +static int __devinit usbmisc_imx6q_probe(struct platform_device *pdev) +{ + struct resource *res; + struct imx6q_usbmisc *data; + int ret; + + if (usbmisc) + return -EBUSY; + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + spin_lock_init(&data->lock); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + data->base = devm_request_and_ioremap(&pdev->dev, res); + if (!data->base) + return -EADDRNOTAVAIL; + + data->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(data->clk)) { + dev_err(&pdev->dev, + "failed to get clock, err=%ld\n", PTR_ERR(data->clk)); + return PTR_ERR(data->clk); + } + + ret = clk_prepare_enable(data->clk); + if (ret) { + dev_err(&pdev->dev, + "clk_prepare_enable failed, err=%d\n", ret); + return ret; + } + + ret = usbmisc_set_ops(&imx6q_usbmisc_ops); + if (ret) { + clk_disable_unprepare(data->clk); + return ret; + } + + usbmisc = data; + + return 0; +} + +static int __devexit usbmisc_imx6q_remove(struct platform_device *pdev) +{ + usbmisc_unset_ops(&imx6q_usbmisc_ops); + clk_disable_unprepare(usbmisc->clk); + return 0; +} + +static struct platform_driver usbmisc_imx6q_driver = { + .probe = usbmisc_imx6q_probe, + .remove = __devexit_p(usbmisc_imx6q_remove), + .driver = { + .name = "usbmisc_imx6q", + .owner = THIS_MODULE, + .of_match_table = usbmisc_imx6q_dt_ids, + }, +}; + +int __init usbmisc_imx6q_drv_init(void) +{ + return platform_driver_register(&usbmisc_imx6q_driver); +} +subsys_initcall(usbmisc_imx6q_drv_init); + +void __exit usbmisc_imx6q_drv_exit(void) +{ + platform_driver_unregister(&usbmisc_imx6q_driver); +} +module_exit(usbmisc_imx6q_drv_exit); + +MODULE_ALIAS("platform:usbmisc-imx6q"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("driver for imx6q usb non-core registers"); +MODULE_AUTHOR("Richard Zhao <richard.zhao@freescale.com>"); diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index ff7b5a8d501c..36f2be4def2f 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -39,7 +39,6 @@ #include <linux/serial.h> #include <linux/tty_driver.h> #include <linux/tty_flip.h> -#include <linux/serial.h> #include <linux/module.h> #include <linux/mutex.h> #include <linux/uaccess.h> diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig index 9981984b365b..f70c1a1694ad 100644 --- a/drivers/usb/core/Kconfig +++ b/drivers/usb/core/Kconfig @@ -56,7 +56,7 @@ config USB_SUSPEND config USB_OTG bool "OTG support" - depends on USB && EXPERIMENTAL + depends on USB depends on USB_SUSPEND default n help diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c index f4bdd0ce8d56..7199adccf444 100644 --- a/drivers/usb/core/config.c +++ b/drivers/usb/core/config.c @@ -702,6 +702,8 @@ int usb_get_configuration(struct usb_device *dev) if (result < 0) { dev_err(ddev, "unable to read config index %d " "descriptor/%s: %d\n", cfgno, "start", result); + if (result != -EPIPE) + goto err; dev_err(ddev, "chopping to %d config(s)\n", cfgno); dev->descriptor.bNumConfigurations = cfgno; break; diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c index 3440812b4a84..f460de31acee 100644 --- a/drivers/usb/core/devices.c +++ b/drivers/usb/core/devices.c @@ -496,6 +496,7 @@ static ssize_t usb_device_dump(char __user **buffer, size_t *nbytes, char *pages_start, *data_end, *speed; unsigned int length; ssize_t total_written = 0; + struct usb_device *childdev = NULL; /* don't bother with anything else if we're not writing any data */ if (*nbytes <= 0) @@ -589,14 +590,12 @@ static ssize_t usb_device_dump(char __user **buffer, size_t *nbytes, free_pages((unsigned long)pages_start, 1); /* Now look at all of this device's children. */ - for (chix = 0; chix < usbdev->maxchild; chix++) { - struct usb_device *childdev = usbdev->children[chix]; - + usb_hub_for_each_child(usbdev, chix, childdev) { if (childdev) { usb_lock_device(childdev); ret = usb_device_dump(buffer, nbytes, skip_bytes, file_offset, childdev, bus, - level + 1, chix, ++cnt); + level + 1, chix - 1, ++cnt); usb_unlock_device(childdev); if (ret == -EFAULT) return total_written; diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index ebb8a9de8b5f..e0356cb859b5 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -1928,6 +1928,38 @@ static int proc_get_capabilities(struct dev_state *ps, void __user *arg) return 0; } +static int proc_disconnect_claim(struct dev_state *ps, void __user *arg) +{ + struct usbdevfs_disconnect_claim dc; + struct usb_interface *intf; + + if (copy_from_user(&dc, arg, sizeof(dc))) + return -EFAULT; + + intf = usb_ifnum_to_if(ps->dev, dc.interface); + if (!intf) + return -EINVAL; + + if (intf->dev.driver) { + struct usb_driver *driver = to_usb_driver(intf->dev.driver); + + if ((dc.flags & USBDEVFS_DISCONNECT_CLAIM_IF_DRIVER) && + strncmp(dc.driver, intf->dev.driver->name, + sizeof(dc.driver)) != 0) + return -EBUSY; + + if ((dc.flags & USBDEVFS_DISCONNECT_CLAIM_EXCEPT_DRIVER) && + strncmp(dc.driver, intf->dev.driver->name, + sizeof(dc.driver)) == 0) + return -EBUSY; + + dev_dbg(&intf->dev, "disconnect by usbfs\n"); + usb_driver_release_interface(driver, intf); + } + + return claimintf(ps, dc.interface); +} + /* * NOTE: All requests here that have interface numbers as parameters * are assuming that somehow the configuration has been prevented from @@ -2101,6 +2133,9 @@ static long usbdev_do_ioctl(struct file *file, unsigned int cmd, case USBDEVFS_GET_CAPABILITIES: ret = proc_get_capabilities(ps, p); break; + case USBDEVFS_DISCONNECT_CLAIM: + ret = proc_disconnect_claim(ps, p); + break; } usb_unlock_device(dev); if (ret >= 0) diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index 445455a4429b..ddd820d25288 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -125,10 +125,9 @@ store_remove_id(struct device_driver *driver, const char *buf, size_t count) { struct usb_dynid *dynid, *n; struct usb_driver *usb_driver = to_usb_driver(driver); - u32 idVendor = 0; - u32 idProduct = 0; - int fields = 0; - int retval = 0; + u32 idVendor; + u32 idProduct; + int fields; fields = sscanf(buf, "%x %x", &idVendor, &idProduct); if (fields < 2) @@ -141,14 +140,10 @@ store_remove_id(struct device_driver *driver, const char *buf, size_t count) (id->idProduct == idProduct)) { list_del(&dynid->node); kfree(dynid); - retval = 0; break; } } spin_unlock(&usb_driver->dynids.lock); - - if (retval) - return retval; return count; } static DRIVER_ATTR(remove_id, S_IRUGO | S_IWUSR, show_dynids, store_remove_id); diff --git a/drivers/usb/core/endpoint.c b/drivers/usb/core/endpoint.c index db7fe50c23d4..68cc6532e749 100644 --- a/drivers/usb/core/endpoint.c +++ b/drivers/usb/core/endpoint.c @@ -24,10 +24,6 @@ struct ep_device { #define to_ep_device(_dev) \ container_of(_dev, struct ep_device, dev) -struct device_type usb_ep_device_type = { - .name = "usb_endpoint", -}; - struct ep_attribute { struct attribute attr; ssize_t (*show)(struct usb_device *, @@ -172,6 +168,11 @@ static void ep_device_release(struct device *dev) kfree(ep_dev); } +struct device_type usb_ep_device_type = { + .name = "usb_endpoint", + .release = ep_device_release, +}; + int usb_create_ep_devs(struct device *parent, struct usb_host_endpoint *endpoint, struct usb_device *udev) @@ -190,7 +191,6 @@ int usb_create_ep_devs(struct device *parent, ep_dev->dev.groups = ep_dev_groups; ep_dev->dev.type = &usb_ep_device_type; ep_dev->dev.parent = parent; - ep_dev->dev.release = ep_device_release; dev_set_name(&ep_dev->dev, "ep_%02x", endpoint->desc.bEndpointAddress); retval = device_register(&ep_dev->dev); diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 75ba2091f9b4..1e741bca0265 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -22,6 +22,7 @@ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include <linux/bcd.h> #include <linux/module.h> #include <linux/version.h> #include <linux/kernel.h> @@ -123,9 +124,8 @@ static inline int is_root_hub(struct usb_device *udev) */ /*-------------------------------------------------------------------------*/ - -#define KERNEL_REL ((LINUX_VERSION_CODE >> 16) & 0x0ff) -#define KERNEL_VER ((LINUX_VERSION_CODE >> 8) & 0x0ff) +#define KERNEL_REL bin2bcd(((LINUX_VERSION_CODE >> 16) & 0x0ff)) +#define KERNEL_VER bin2bcd(((LINUX_VERSION_CODE >> 8) & 0x0ff)) /* usb 3.0 root hub device descriptor */ static const u8 usb3_rh_dev_descriptor[18] = { @@ -2151,15 +2151,8 @@ EXPORT_SYMBOL_GPL(usb_bus_start_enum); irqreturn_t usb_hcd_irq (int irq, void *__hcd) { struct usb_hcd *hcd = __hcd; - unsigned long flags; irqreturn_t rc; - /* IRQF_DISABLED doesn't work correctly with shared IRQs - * when the first handler doesn't use it. So let's just - * assume it's never used. - */ - local_irq_save(flags); - if (unlikely(HCD_DEAD(hcd) || !HCD_HW_ACCESSIBLE(hcd))) rc = IRQ_NONE; else if (hcd->driver->irq(hcd) == IRQ_NONE) @@ -2167,7 +2160,6 @@ irqreturn_t usb_hcd_irq (int irq, void *__hcd) else rc = IRQ_HANDLED; - local_irq_restore(flags); return rc; } EXPORT_SYMBOL_GPL(usb_hcd_irq); @@ -2355,14 +2347,6 @@ static int usb_hcd_request_irqs(struct usb_hcd *hcd, int retval; if (hcd->driver->irq) { - - /* IRQF_DISABLED doesn't work as advertised when used together - * with IRQF_SHARED. As usb_hcd_irq() will always disable - * interrupts we can remove it here. - */ - if (irqflags & IRQF_SHARED) - irqflags &= ~IRQF_DISABLED; - snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d", hcd->driver->description, hcd->self.busnum); retval = request_irq(irqnum, &usb_hcd_irq, irqflags, diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 128a804c42f4..673ee4696262 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -39,6 +39,13 @@ #endif #endif +struct usb_port { + struct usb_device *child; + struct device dev; + struct dev_state *port_owner; + enum usb_port_connect_type connect_type; +}; + struct usb_hub { struct device *intfdev; /* the "interface" device */ struct usb_device *hdev; @@ -83,7 +90,7 @@ struct usb_hub { u8 indicator[USB_MAXCHILDREN]; struct delayed_work leds; struct delayed_work init_work; - struct dev_state **port_owners; + struct usb_port **ports; }; static inline int hub_is_superspeed(struct usb_device *hdev) @@ -156,6 +163,8 @@ EXPORT_SYMBOL_GPL(ehci_cf_port_reset_rwsem); #define HUB_DEBOUNCE_STEP 25 #define HUB_DEBOUNCE_STABLE 100 +#define to_usb_port(_dev) \ + container_of(_dev, struct usb_port, dev) static int usb_reset_and_verify_device(struct usb_device *udev); @@ -174,7 +183,7 @@ static inline char *portspeed(struct usb_hub *hub, int portstatus) /* Note that hdev or one of its children must be locked! */ static struct usb_hub *hdev_to_hub(struct usb_device *hdev) { - if (!hdev || !hdev->actconfig) + if (!hdev || !hdev->actconfig || !hdev->maxchild) return NULL; return usb_get_intfdata(hdev->actconfig->interface[0]); } @@ -869,8 +878,8 @@ static int hub_port_disable(struct usb_hub *hub, int port1, int set_state) struct usb_device *hdev = hub->hdev; int ret = 0; - if (hdev->children[port1-1] && set_state) - usb_set_device_state(hdev->children[port1-1], + if (hub->ports[port1 - 1]->child && set_state) + usb_set_device_state(hub->ports[port1 - 1]->child, USB_STATE_NOTATTACHED); if (!hub->error && !hub_is_superspeed(hub->hdev)) ret = clear_port_feature(hdev, port1, USB_PORT_FEAT_ENABLE); @@ -1026,7 +1035,7 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) * which ports need attention. */ for (port1 = 1; port1 <= hdev->maxchild; ++port1) { - struct usb_device *udev = hdev->children[port1-1]; + struct usb_device *udev = hub->ports[port1 - 1]->child; u16 portstatus, portchange; portstatus = portchange = 0; @@ -1191,8 +1200,8 @@ static void hub_quiesce(struct usb_hub *hub, enum hub_quiescing_type type) if (type != HUB_SUSPEND) { /* Disconnect all the children */ for (i = 0; i < hdev->maxchild; ++i) { - if (hdev->children[i]) - usb_disconnect(&hdev->children[i]); + if (hub->ports[i]->child) + usb_disconnect(&hub->ports[i]->child); } } @@ -1222,6 +1231,52 @@ static int hub_post_reset(struct usb_interface *intf) return 0; } +static void usb_port_device_release(struct device *dev) +{ + struct usb_port *port_dev = to_usb_port(dev); + + kfree(port_dev); +} + +static void usb_hub_remove_port_device(struct usb_hub *hub, + int port1) +{ + device_unregister(&hub->ports[port1 - 1]->dev); +} + +struct device_type usb_port_device_type = { + .name = "usb_port", + .release = usb_port_device_release, +}; + +static int usb_hub_create_port_device(struct usb_hub *hub, + int port1) +{ + struct usb_port *port_dev = NULL; + int retval; + + port_dev = kzalloc(sizeof(*port_dev), GFP_KERNEL); + if (!port_dev) { + retval = -ENOMEM; + goto exit; + } + + hub->ports[port1 - 1] = port_dev; + port_dev->dev.parent = hub->intfdev; + port_dev->dev.type = &usb_port_device_type; + dev_set_name(&port_dev->dev, "port%d", port1); + + retval = device_register(&port_dev->dev); + if (retval) + goto error_register; + return 0; + +error_register: + put_device(&port_dev->dev); +exit: + return retval; +} + static int hub_configure(struct usb_hub *hub, struct usb_endpoint_descriptor *endpoint) { @@ -1231,7 +1286,7 @@ static int hub_configure(struct usb_hub *hub, u16 hubstatus, hubchange; u16 wHubCharacteristics; unsigned int pipe; - int maxp, ret; + int maxp, ret, i; char *message = "out of memory"; hub->buffer = kmalloc(sizeof(*hub->buffer), GFP_KERNEL); @@ -1271,11 +1326,9 @@ static int hub_configure(struct usb_hub *hub, dev_info (hub_dev, "%d port%s detected\n", hdev->maxchild, (hdev->maxchild == 1) ? "" : "s"); - hdev->children = kzalloc(hdev->maxchild * - sizeof(struct usb_device *), GFP_KERNEL); - hub->port_owners = kzalloc(hdev->maxchild * sizeof(struct dev_state *), - GFP_KERNEL); - if (!hdev->children || !hub->port_owners) { + hub->ports = kzalloc(hdev->maxchild * sizeof(struct usb_port *), + GFP_KERNEL); + if (!hub->ports) { ret = -ENOMEM; goto fail; } @@ -1484,6 +1537,11 @@ static int hub_configure(struct usb_hub *hub, if (hub->has_indicators && blinkenlights) hub->indicator [0] = INDICATOR_CYCLE; + for (i = 0; i < hdev->maxchild; i++) + if (usb_hub_create_port_device(hub, i + 1) < 0) + dev_err(hub->intfdev, + "couldn't create port%d device.\n", i + 1); + hub_activate(hub, HUB_INIT); return 0; @@ -1508,6 +1566,7 @@ static void hub_disconnect(struct usb_interface *intf) { struct usb_hub *hub = usb_get_intfdata(intf); struct usb_device *hdev = interface_to_usbdev(intf); + int i; /* Take the hub off the event list and don't let it be added again */ spin_lock_irq(&hub_event_lock); @@ -1523,14 +1582,16 @@ static void hub_disconnect(struct usb_interface *intf) hub_quiesce(hub, HUB_DISCONNECT); usb_set_intfdata (intf, NULL); + + for (i = 0; i < hdev->maxchild; i++) + usb_hub_remove_port_device(hub, i + 1); hub->hdev->maxchild = 0; if (hub->hdev->speed == USB_SPEED_HIGH) highspeed_hubs--; usb_free_urb(hub->urb); - kfree(hdev->children); - kfree(hub->port_owners); + kfree(hub->ports); kfree(hub->descriptor); kfree(hub->status); kfree(hub->buffer); @@ -1617,6 +1678,7 @@ static int hub_ioctl(struct usb_interface *intf, unsigned int code, void *user_data) { struct usb_device *hdev = interface_to_usbdev (intf); + struct usb_hub *hub = hdev_to_hub(hdev); /* assert ifno == 0 (part of hub spec) */ switch (code) { @@ -1630,11 +1692,11 @@ hub_ioctl(struct usb_interface *intf, unsigned int code, void *user_data) else { info->nports = hdev->maxchild; for (i = 0; i < info->nports; i++) { - if (hdev->children[i] == NULL) + if (hub->ports[i]->child == NULL) info->port[i] = 0; else info->port[i] = - hdev->children[i]->devnum; + hub->ports[i]->child->devnum; } } spin_unlock_irq(&device_state_lock); @@ -1662,7 +1724,7 @@ static int find_port_owner(struct usb_device *hdev, unsigned port1, /* This assumes that devices not managed by the hub driver * will always have maxchild equal to 0. */ - *ppowner = &(hdev_to_hub(hdev)->port_owners[port1 - 1]); + *ppowner = &(hdev_to_hub(hdev)->ports[port1 - 1]->port_owner); return 0; } @@ -1699,16 +1761,14 @@ int usb_hub_release_port(struct usb_device *hdev, unsigned port1, void usb_hub_release_all_ports(struct usb_device *hdev, struct dev_state *owner) { + struct usb_hub *hub = hdev_to_hub(hdev); int n; - struct dev_state **powner; - n = find_port_owner(hdev, 1, &powner); - if (n == 0) { - for (; n < hdev->maxchild; (++n, ++powner)) { - if (*powner == owner) - *powner = NULL; - } + for (n = 0; n < hdev->maxchild; n++) { + if (hub->ports[n]->port_owner == owner) + hub->ports[n]->port_owner = NULL; } + } /* The caller must hold udev's lock */ @@ -1719,17 +1779,17 @@ bool usb_device_is_owned(struct usb_device *udev) if (udev->state == USB_STATE_NOTATTACHED || !udev->parent) return false; hub = hdev_to_hub(udev->parent); - return !!hub->port_owners[udev->portnum - 1]; + return !!hub->ports[udev->portnum - 1]->port_owner; } - static void recursively_mark_NOTATTACHED(struct usb_device *udev) { + struct usb_hub *hub = hdev_to_hub(udev); int i; for (i = 0; i < udev->maxchild; ++i) { - if (udev->children[i]) - recursively_mark_NOTATTACHED(udev->children[i]); + if (hub->ports[i]->child) + recursively_mark_NOTATTACHED(hub->ports[i]->child); } if (udev->state == USB_STATE_SUSPENDED) udev->active_duration -= jiffies; @@ -1893,6 +1953,7 @@ static void hub_free_dev(struct usb_device *udev) void usb_disconnect(struct usb_device **pdev) { struct usb_device *udev = *pdev; + struct usb_hub *hub = hdev_to_hub(udev); int i; /* mark the device as inactive, so any further urb submissions for @@ -1907,8 +1968,8 @@ void usb_disconnect(struct usb_device **pdev) /* Free up all the children before we remove this device */ for (i = 0; i < udev->maxchild; i++) { - if (udev->children[i]) - usb_disconnect(&udev->children[i]); + if (hub->ports[i]->child) + usb_disconnect(&hub->ports[i]->child); } /* deallocate hcd/hardware state ... nuking all pending urbs and @@ -2113,7 +2174,8 @@ static void set_usb_port_removable(struct usb_device *udev) return; if (hub_is_superspeed(hdev)) { - if (hub->descriptor->u.ss.DeviceRemovable & (1 << port)) + if (le16_to_cpu(hub->descriptor->u.ss.DeviceRemovable) + & (1 << port)) removable = false; } else { if (hub->descriptor->u.hs.DeviceRemovable[port / 8] & (1 << (port % 8))) @@ -3072,7 +3134,7 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg) for (port1 = 1; port1 <= hdev->maxchild; port1++) { struct usb_device *udev; - udev = hdev->children [port1-1]; + udev = hub->ports[port1 - 1]->child; if (udev && udev->can_submit) { dev_warn(&intf->dev, "port %d nyet suspended\n", port1); if (PMSG_IS_AUTO(msg)) @@ -3999,7 +4061,7 @@ hub_power_remaining (struct usb_hub *hub) remaining = hdev->bus_mA - hub->descriptor->bHubContrCurrent; for (port1 = 1; port1 <= hdev->maxchild; ++port1) { - struct usb_device *udev = hdev->children[port1 - 1]; + struct usb_device *udev = hub->ports[port1 - 1]->child; int delta; if (!udev) @@ -4063,7 +4125,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, #endif /* Try to resuscitate an existing device */ - udev = hdev->children[port1-1]; + udev = hub->ports[port1 - 1]->child; if ((portstatus & USB_PORT_STAT_CONNECTION) && udev && udev->state != USB_STATE_NOTATTACHED) { usb_lock_device(udev); @@ -4092,7 +4154,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, /* Disconnect any existing devices under this port */ if (udev) - usb_disconnect(&hdev->children[port1-1]); + usb_disconnect(&hub->ports[port1 - 1]->child); clear_bit(port1, hub->change_bits); /* We can forget about a "removed" device when there's a physical @@ -4228,7 +4290,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, if (hdev->state == USB_STATE_NOTATTACHED) status = -ENOTCONN; else - hdev->children[port1-1] = udev; + hub->ports[port1 - 1]->child = udev; spin_unlock_irq(&device_state_lock); /* Run it through the hoops (find a driver, etc) */ @@ -4236,7 +4298,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, status = usb_new_device(udev); if (status) { spin_lock_irq(&device_state_lock); - hdev->children[port1-1] = NULL; + hub->ports[port1 - 1]->child = NULL; spin_unlock_irq(&device_state_lock); } } @@ -4282,7 +4344,7 @@ static int hub_handle_remote_wakeup(struct usb_hub *hub, unsigned int port, int ret; hdev = hub->hdev; - udev = hdev->children[port-1]; + udev = hub->ports[port - 1]->child; if (!hub_is_superspeed(hdev)) { if (!(portchange & USB_PORT_STAT_C_SUSPEND)) return 0; @@ -4436,7 +4498,7 @@ static void hub_events(void) */ if (!(portstatus & USB_PORT_STAT_ENABLE) && !connect_change - && hdev->children[i-1]) { + && hub->ports[i - 1]->child) { dev_err (hub_dev, "port %i " "disabled by hub (EMI?), " @@ -4993,3 +5055,75 @@ void usb_queue_reset_device(struct usb_interface *iface) schedule_work(&iface->reset_ws); } EXPORT_SYMBOL_GPL(usb_queue_reset_device); + +/** + * usb_hub_find_child - Get the pointer of child device + * attached to the port which is specified by @port1. + * @hdev: USB device belonging to the usb hub + * @port1: port num to indicate which port the child device + * is attached to. + * + * USB drivers call this function to get hub's child device + * pointer. + * + * Return NULL if input param is invalid and + * child's usb_device pointer if non-NULL. + */ +struct usb_device *usb_hub_find_child(struct usb_device *hdev, + int port1) +{ + struct usb_hub *hub = hdev_to_hub(hdev); + + if (port1 < 1 || port1 > hdev->maxchild) + return NULL; + return hub->ports[port1 - 1]->child; +} +EXPORT_SYMBOL_GPL(usb_hub_find_child); + +/** + * usb_set_hub_port_connect_type - set hub port connect type. + * @hdev: USB device belonging to the usb hub + * @port1: port num of the port + * @type: connect type of the port + */ +void usb_set_hub_port_connect_type(struct usb_device *hdev, int port1, + enum usb_port_connect_type type) +{ + struct usb_hub *hub = hdev_to_hub(hdev); + + hub->ports[port1 - 1]->connect_type = type; +} + +/** + * usb_get_hub_port_connect_type - Get the port's connect type + * @hdev: USB device belonging to the usb hub + * @port1: port num of the port + * + * Return connect type of the port and if input params are + * invalid, return USB_PORT_CONNECT_TYPE_UNKNOWN. + */ +enum usb_port_connect_type +usb_get_hub_port_connect_type(struct usb_device *hdev, int port1) +{ + struct usb_hub *hub = hdev_to_hub(hdev); + + return hub->ports[port1 - 1]->connect_type; +} + +#ifdef CONFIG_ACPI +/** + * usb_get_hub_port_acpi_handle - Get the usb port's acpi handle + * @hdev: USB device belonging to the usb hub + * @port1: port num of the port + * + * Return port's acpi handle if successful, NULL if params are + * invaild. + */ +acpi_handle usb_get_hub_port_acpi_handle(struct usb_device *hdev, + int port1) +{ + struct usb_hub *hub = hdev_to_hub(hdev); + + return DEVICE_ACPI_HANDLE(&hub->ports[port1 - 1]->dev); +} +#endif diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 0ab7da2283e3..1ed5afd91e6d 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -146,8 +146,6 @@ int usb_control_msg(struct usb_device *dev, unsigned int pipe, __u8 request, dr->wIndex = cpu_to_le16(index); dr->wLength = cpu_to_le16(size); - /* dbg("usb_control_msg"); */ - ret = usb_internal_control_msg(dev, pipe, dr, data, size, timeout); kfree(dr); diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index e77a8e8eaa23..fdefd9c7f7af 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -209,7 +209,7 @@ void usb_detect_quirks(struct usb_device *udev) * for all devices. It will affect things like hub resets * and EMF-related port disables. */ - if (!(udev->quirks & USB_QUIRK_RESET_MORPHS)) + if (!(udev->quirks & USB_QUIRK_RESET)) udev->persist_enabled = 1; #endif /* CONFIG_PM */ } diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index 682e8256b95d..818e4a024d0d 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -196,7 +196,7 @@ show_avoid_reset_quirk(struct device *dev, struct device_attribute *attr, char * struct usb_device *udev; udev = to_usb_device(dev); - return sprintf(buf, "%d\n", !!(udev->quirks & USB_QUIRK_RESET_MORPHS)); + return sprintf(buf, "%d\n", !!(udev->quirks & USB_QUIRK_RESET)); } static ssize_t @@ -204,15 +204,15 @@ set_avoid_reset_quirk(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct usb_device *udev = to_usb_device(dev); - int config; + int val; - if (sscanf(buf, "%d", &config) != 1 || config < 0 || config > 1) + if (sscanf(buf, "%d", &val) != 1 || val < 0 || val > 1) return -EINVAL; usb_lock_device(udev); - if (config) - udev->quirks |= USB_QUIRK_RESET_MORPHS; + if (val) + udev->quirks |= USB_QUIRK_RESET; else - udev->quirks &= ~USB_QUIRK_RESET_MORPHS; + udev->quirks &= ~USB_QUIRK_RESET; usb_unlock_device(udev); return count; } diff --git a/drivers/usb/core/usb-acpi.c b/drivers/usb/core/usb-acpi.c index 8947b203d5a4..0ef7d42d8abe 100644 --- a/drivers/usb/core/usb-acpi.c +++ b/drivers/usb/core/usb-acpi.c @@ -19,20 +19,91 @@ #include "usb.h" -static int usb_acpi_check_upc(struct usb_device *udev, acpi_handle handle) +/** + * usb_acpi_power_manageable - check whether usb port has + * acpi power resource. + * @hdev: USB device belonging to the usb hub + * @index: port index based zero + * + * Return true if the port has acpi power resource and false if no. + */ +bool usb_acpi_power_manageable(struct usb_device *hdev, int index) +{ + acpi_handle port_handle; + int port1 = index + 1; + + port_handle = usb_get_hub_port_acpi_handle(hdev, + port1); + if (port_handle) + return acpi_bus_power_manageable(port_handle); + else + return false; +} +EXPORT_SYMBOL_GPL(usb_acpi_power_manageable); + +/** + * usb_acpi_set_power_state - control usb port's power via acpi power + * resource + * @hdev: USB device belonging to the usb hub + * @index: port index based zero + * @enable: power state expected to be set + * + * Notice to use usb_acpi_power_manageable() to check whether the usb port + * has acpi power resource before invoking this function. + * + * Returns 0 on success, else negative errno. + */ +int usb_acpi_set_power_state(struct usb_device *hdev, int index, bool enable) +{ + acpi_handle port_handle; + unsigned char state; + int port1 = index + 1; + int error = -EINVAL; + + port_handle = (acpi_handle)usb_get_hub_port_acpi_handle(hdev, + port1); + if (!port_handle) + return error; + + if (enable) + state = ACPI_STATE_D0; + else + state = ACPI_STATE_D3_COLD; + + error = acpi_bus_set_power(port_handle, state); + if (!error) + dev_dbg(&hdev->dev, "The power of hub port %d was set to %d\n", + port1, enable); + else + dev_dbg(&hdev->dev, "The power of hub port failed to be set\n"); + + return error; +} +EXPORT_SYMBOL_GPL(usb_acpi_set_power_state); + +static int usb_acpi_check_port_connect_type(struct usb_device *hdev, + acpi_handle handle, int port1) { acpi_status status; struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; union acpi_object *upc; + struct acpi_pld pld; int ret = 0; - status = acpi_evaluate_object(handle, "_UPC", NULL, &buffer); - + /* + * Accoding to ACPI Spec 9.13. PLD indicates whether usb port is + * user visible and _UPC indicates whether it is connectable. If + * the port was visible and connectable, it could be freely connected + * and disconnected with USB devices. If no visible and connectable, + * a usb device is directly hard-wired to the port. If no visible and + * no connectable, the port would be not used. + */ + status = acpi_get_physical_device_location(handle, &pld); if (ACPI_FAILURE(status)) return -ENODEV; + status = acpi_evaluate_object(handle, "_UPC", NULL, &buffer); upc = buffer.pointer; - if (!upc || (upc->type != ACPI_TYPE_PACKAGE) || upc->package.count != 4) { ret = -EINVAL; @@ -40,69 +111,107 @@ static int usb_acpi_check_upc(struct usb_device *udev, acpi_handle handle) } if (upc->package.elements[0].integer.value) - udev->removable = USB_DEVICE_REMOVABLE; - else - udev->removable = USB_DEVICE_FIXED; + if (pld.user_visible) + usb_set_hub_port_connect_type(hdev, port1, + USB_PORT_CONNECT_TYPE_HOT_PLUG); + else + usb_set_hub_port_connect_type(hdev, port1, + USB_PORT_CONNECT_TYPE_HARD_WIRED); + else if (!pld.user_visible) + usb_set_hub_port_connect_type(hdev, port1, USB_PORT_NOT_USED); out: kfree(upc); return ret; } -static int usb_acpi_check_pld(struct usb_device *udev, acpi_handle handle) -{ - acpi_status status; - struct acpi_pld pld; - - status = acpi_get_physical_device_location(handle, &pld); - - if (ACPI_FAILURE(status)) - return -ENODEV; - - if (pld.user_visible) - udev->removable = USB_DEVICE_REMOVABLE; - else - udev->removable = USB_DEVICE_FIXED; - - return 0; -} - static int usb_acpi_find_device(struct device *dev, acpi_handle *handle) { struct usb_device *udev; - struct device *parent; acpi_handle *parent_handle; - - if (!is_usb_device(dev)) - return -ENODEV; - - udev = to_usb_device(dev); - parent = dev->parent; - parent_handle = DEVICE_ACPI_HANDLE(parent); - - if (!parent_handle) - return -ENODEV; - - *handle = acpi_get_child(parent_handle, udev->portnum); - - if (!*handle) - return -ENODEV; + int port_num; /* - * PLD will tell us whether a port is removable to the user or - * not. If we don't get an answer from PLD (it's not present - * or it's malformed) then try to infer it from UPC. If a - * device isn't connectable then it's probably not removable. + * In the ACPI DSDT table, only usb root hub and usb ports are + * acpi device nodes. The hierarchy like following. + * Device (EHC1) + * Device (HUBN) + * Device (PR01) + * Device (PR11) + * Device (PR12) + * Device (PR13) + * ... + * So all binding process is divided into two parts. binding + * root hub and usb ports. */ - if (usb_acpi_check_pld(udev, *handle) != 0) - usb_acpi_check_upc(udev, *handle); + if (is_usb_device(dev)) { + udev = to_usb_device(dev); + if (udev->parent) { + enum usb_port_connect_type type; + + /* + * According usb port's connect type to set usb device's + * removability. + */ + type = usb_get_hub_port_connect_type(udev->parent, + udev->portnum); + switch (type) { + case USB_PORT_CONNECT_TYPE_HOT_PLUG: + udev->removable = USB_DEVICE_REMOVABLE; + break; + case USB_PORT_CONNECT_TYPE_HARD_WIRED: + udev->removable = USB_DEVICE_FIXED; + break; + default: + udev->removable = USB_DEVICE_REMOVABLE_UNKNOWN; + break; + } + + return -ENODEV; + } + + /* root hub's parent is the usb hcd. */ + parent_handle = DEVICE_ACPI_HANDLE(dev->parent); + *handle = acpi_get_child(parent_handle, udev->portnum); + if (!*handle) + return -ENODEV; + return 0; + } else if (is_usb_port(dev)) { + sscanf(dev_name(dev), "port%d", &port_num); + /* Get the struct usb_device point of port's hub */ + udev = to_usb_device(dev->parent->parent); + + /* + * The root hub ports' parent is the root hub. The non-root-hub + * ports' parent is the parent hub port which the hub is + * connected to. + */ + if (!udev->parent) { + *handle = acpi_get_child(DEVICE_ACPI_HANDLE(&udev->dev), + port_num); + if (!*handle) + return -ENODEV; + } else { + parent_handle = + usb_get_hub_port_acpi_handle(udev->parent, + udev->portnum); + if (!parent_handle) + return -ENODEV; + + *handle = acpi_get_child(parent_handle, port_num); + if (!*handle) + return -ENODEV; + } + usb_acpi_check_port_connect_type(udev, *handle, port_num); + } else + return -ENODEV; return 0; } static struct acpi_bus_type usb_acpi_bus = { .bus = &usb_bus_type, - .find_bridge = NULL, + .find_bridge = usb_acpi_find_device, .find_device = usb_acpi_find_device, }; diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h index acb103c5c391..1c528c1bf0be 100644 --- a/drivers/usb/core/usb.h +++ b/drivers/usb/core/usb.h @@ -1,4 +1,5 @@ #include <linux/pm.h> +#include <linux/acpi.h> struct dev_state; @@ -115,6 +116,7 @@ extern struct bus_type usb_bus_type; extern struct device_type usb_device_type; extern struct device_type usb_if_device_type; extern struct device_type usb_ep_device_type; +extern struct device_type usb_port_device_type; extern struct usb_device_driver usb_generic_driver; static inline int is_usb_device(const struct device *dev) @@ -132,6 +134,11 @@ static inline int is_usb_endpoint(const struct device *dev) return dev->type == &usb_ep_device_type; } +static inline int is_usb_port(const struct device *dev) +{ + return dev->type == &usb_port_device_type; +} + /* Do the same for device drivers and interface drivers. */ static inline int is_usb_device_driver(struct device_driver *drv) @@ -162,10 +169,16 @@ extern void usb_notify_add_device(struct usb_device *udev); extern void usb_notify_remove_device(struct usb_device *udev); extern void usb_notify_add_bus(struct usb_bus *ubus); extern void usb_notify_remove_bus(struct usb_bus *ubus); +extern enum usb_port_connect_type + usb_get_hub_port_connect_type(struct usb_device *hdev, int port1); +extern void usb_set_hub_port_connect_type(struct usb_device *hdev, int port1, + enum usb_port_connect_type type); #ifdef CONFIG_ACPI extern int usb_acpi_register(void); extern void usb_acpi_unregister(void); +extern acpi_handle usb_get_hub_port_acpi_handle(struct usb_device *hdev, + int port1); #else static inline int usb_acpi_register(void) { return 0; }; static inline void usb_acpi_unregister(void) { }; diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig index d13c60f42139..f6a6e070c2ac 100644 --- a/drivers/usb/dwc3/Kconfig +++ b/drivers/usb/dwc3/Kconfig @@ -2,8 +2,6 @@ config USB_DWC3 tristate "DesignWare USB3 DRD Core Support" depends on (USB && USB_GADGET) select USB_OTG_UTILS - select USB_GADGET_DUALSPEED - select USB_GADGET_SUPERSPEED select USB_XHCI_PLATFORM if USB_SUPPORT && USB_XHCI_HCD help Say Y or M here if your system has a Dual Role SuperSpeed diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index a68ff53124dc..b415c0c859d3 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -50,6 +50,7 @@ #include <linux/dma-mapping.h> #include <linux/of.h> +#include <linux/usb/otg.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> @@ -99,6 +100,7 @@ void dwc3_put_device_id(int id) ret = test_bit(id, dwc3_devs); WARN(!ret, "dwc3: ID %d not in use\n", id); + smp_mb__before_clear_bit(); clear_bit(id, dwc3_devs); } EXPORT_SYMBOL_GPL(dwc3_put_device_id); @@ -136,6 +138,8 @@ static void dwc3_core_soft_reset(struct dwc3 *dwc) reg |= DWC3_GUSB2PHYCFG_PHYSOFTRST; dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); + usb_phy_init(dwc->usb2_phy); + usb_phy_init(dwc->usb3_phy); mdelay(100); /* Clear USB3 PHY reset */ @@ -464,12 +468,24 @@ static int __devinit dwc3_probe(struct platform_device *pdev) return -ENOMEM; } - regs = devm_ioremap(dev, res->start, resource_size(res)); + regs = devm_ioremap_nocache(dev, res->start, resource_size(res)); if (!regs) { dev_err(dev, "ioremap failed\n"); return -ENOMEM; } + dwc->usb2_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2); + if (IS_ERR_OR_NULL(dwc->usb2_phy)) { + dev_err(dev, "no usb2 phy configured\n"); + return -EPROBE_DEFER; + } + + dwc->usb3_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB3); + if (IS_ERR_OR_NULL(dwc->usb3_phy)) { + dev_err(dev, "no usb3 phy configured\n"); + return -EPROBE_DEFER; + } + spin_lock_init(&dwc->lock); platform_set_drvdata(pdev, dwc); diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 151eca876dfd..243affc93431 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -457,7 +457,6 @@ enum dwc3_phy { enum dwc3_ep0_next { DWC3_EP0_UNKNOWN = 0, DWC3_EP0_COMPLETE, - DWC3_EP0_NRDY_SETUP, DWC3_EP0_NRDY_DATA, DWC3_EP0_NRDY_STATUS, }; @@ -624,6 +623,8 @@ struct dwc3_scratchpad_array { * @maximum_speed: maximum speed requested (mainly for testing purposes) * @revision: revision register contents * @mode: mode of operation + * @usb2_phy: pointer to USB2 PHY + * @usb3_phy: pointer to USB3 PHY * @is_selfpowered: true when we are selfpowered * @three_stage_setup: set if we perform a three phase setup * @ep0_bounced: true when we used bounce buffer @@ -667,6 +668,9 @@ struct dwc3 { struct usb_gadget gadget; struct usb_gadget_driver *gadget_driver; + struct usb_phy *usb2_phy; + struct usb_phy *usb3_phy; + void __iomem *regs; size_t regs_size; @@ -779,7 +783,6 @@ struct dwc3_event_depevt { #define DEPEVT_STREAMEVT_NOTFOUND 2 /* Control-only Status */ -#define DEPEVT_STATUS_CONTROL_SETUP 0 #define DEPEVT_STATUS_CONTROL_DATA 1 #define DEPEVT_STATUS_CONTROL_STATUS 2 diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c index b8f00389fa34..ca6597853f90 100644 --- a/drivers/usb/dwc3/dwc3-exynos.c +++ b/drivers/usb/dwc3/dwc3-exynos.c @@ -19,16 +19,74 @@ #include <linux/platform_data/dwc3-exynos.h> #include <linux/dma-mapping.h> #include <linux/clk.h> +#include <linux/usb/otg.h> +#include <linux/usb/nop-usb-xceiv.h> #include "core.h" struct dwc3_exynos { struct platform_device *dwc3; + struct platform_device *usb2_phy; + struct platform_device *usb3_phy; struct device *dev; struct clk *clk; }; +static int __devinit dwc3_exynos_register_phys(struct dwc3_exynos *exynos) +{ + struct nop_usb_xceiv_platform_data pdata; + struct platform_device *pdev; + int ret; + + memset(&pdata, 0x00, sizeof(pdata)); + + pdev = platform_device_alloc("nop_usb_xceiv", 0); + if (!pdev) + return -ENOMEM; + + exynos->usb2_phy = pdev; + pdata.type = USB_PHY_TYPE_USB2; + + ret = platform_device_add_data(exynos->usb2_phy, &pdata, sizeof(pdata)); + if (ret) + goto err1; + + pdev = platform_device_alloc("nop_usb_xceiv", 1); + if (!pdev) { + ret = -ENOMEM; + goto err1; + } + + exynos->usb3_phy = pdev; + pdata.type = USB_PHY_TYPE_USB3; + + ret = platform_device_add_data(exynos->usb3_phy, &pdata, sizeof(pdata)); + if (ret) + goto err2; + + ret = platform_device_add(exynos->usb2_phy); + if (ret) + goto err2; + + ret = platform_device_add(exynos->usb3_phy); + if (ret) + goto err3; + + return 0; + +err3: + platform_device_del(exynos->usb2_phy); + +err2: + platform_device_put(exynos->usb3_phy); + +err1: + platform_device_put(exynos->usb2_phy); + + return ret; +} + static int __devinit dwc3_exynos_probe(struct platform_device *pdev) { struct dwc3_exynos_data *pdata = pdev->dev.platform_data; @@ -51,6 +109,12 @@ static int __devinit dwc3_exynos_probe(struct platform_device *pdev) if (devid < 0) goto err1; + ret = dwc3_exynos_register_phys(exynos); + if (ret) { + dev_err(&pdev->dev, "couldn't register PHYs\n"); + goto err1; + } + dwc3 = platform_device_alloc("dwc3", devid); if (!dwc3) { dev_err(&pdev->dev, "couldn't allocate dwc3 device\n"); @@ -120,6 +184,8 @@ static int __devexit dwc3_exynos_remove(struct platform_device *pdev) struct dwc3_exynos_data *pdata = pdev->dev.platform_data; platform_device_unregister(exynos->dwc3); + platform_device_unregister(exynos->usb2_phy); + platform_device_unregister(exynos->usb3_phy); dwc3_put_device_id(exynos->dwc3->id); diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c index 479dc047da3a..ee57a10d90d0 100644 --- a/drivers/usb/dwc3/dwc3-omap.c +++ b/drivers/usb/dwc3/dwc3-omap.c @@ -48,6 +48,9 @@ #include <linux/io.h> #include <linux/of.h> +#include <linux/usb/otg.h> +#include <linux/usb/nop-usb-xceiv.h> + #include "core.h" /* @@ -131,6 +134,8 @@ struct dwc3_omap { spinlock_t lock; struct platform_device *dwc3; + struct platform_device *usb2_phy; + struct platform_device *usb3_phy; struct device *dev; int irq; @@ -152,6 +157,59 @@ static inline void dwc3_omap_writel(void __iomem *base, u32 offset, u32 value) writel(value, base + offset); } +static int __devinit dwc3_omap_register_phys(struct dwc3_omap *omap) +{ + struct nop_usb_xceiv_platform_data pdata; + struct platform_device *pdev; + int ret; + + memset(&pdata, 0x00, sizeof(pdata)); + + pdev = platform_device_alloc("nop_usb_xceiv", 0); + if (!pdev) + return -ENOMEM; + + omap->usb2_phy = pdev; + pdata.type = USB_PHY_TYPE_USB2; + + ret = platform_device_add_data(omap->usb2_phy, &pdata, sizeof(pdata)); + if (ret) + goto err1; + + pdev = platform_device_alloc("nop_usb_xceiv", 1); + if (!pdev) { + ret = -ENOMEM; + goto err1; + } + + omap->usb3_phy = pdev; + pdata.type = USB_PHY_TYPE_USB3; + + ret = platform_device_add_data(omap->usb3_phy, &pdata, sizeof(pdata)); + if (ret) + goto err2; + + ret = platform_device_add(omap->usb2_phy); + if (ret) + goto err2; + + ret = platform_device_add(omap->usb3_phy); + if (ret) + goto err3; + + return 0; + +err3: + platform_device_del(omap->usb2_phy); + +err2: + platform_device_put(omap->usb3_phy); + +err1: + platform_device_put(omap->usb2_phy); + + return ret; +} static irqreturn_t dwc3_omap_interrupt(int irq, void *_omap) { @@ -251,6 +309,12 @@ static int __devinit dwc3_omap_probe(struct platform_device *pdev) return -ENOMEM; } + ret = dwc3_omap_register_phys(omap); + if (ret) { + dev_err(dev, "couldn't register PHYs\n"); + return ret; + } + devid = dwc3_get_device_id(); if (devid < 0) return -ENODEV; @@ -371,6 +435,8 @@ static int __devexit dwc3_omap_remove(struct platform_device *pdev) struct dwc3_omap *omap = platform_get_drvdata(pdev); platform_device_unregister(omap->dwc3); + platform_device_unregister(omap->usb2_phy); + platform_device_unregister(omap->usb3_phy); dwc3_put_device_id(omap->dwc3->id); diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index a9ca9adba391..94f550e37f98 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -42,6 +42,9 @@ #include <linux/pci.h> #include <linux/platform_device.h> +#include <linux/usb/otg.h> +#include <linux/usb/nop-usb-xceiv.h> + #include "core.h" /* FIXME define these in <linux/pci_ids.h> */ @@ -51,8 +54,64 @@ struct dwc3_pci { struct device *dev; struct platform_device *dwc3; + struct platform_device *usb2_phy; + struct platform_device *usb3_phy; }; +static int __devinit dwc3_pci_register_phys(struct dwc3_pci *glue) +{ + struct nop_usb_xceiv_platform_data pdata; + struct platform_device *pdev; + int ret; + + memset(&pdata, 0x00, sizeof(pdata)); + + pdev = platform_device_alloc("nop_usb_xceiv", 0); + if (!pdev) + return -ENOMEM; + + glue->usb2_phy = pdev; + pdata.type = USB_PHY_TYPE_USB2; + + ret = platform_device_add_data(glue->usb2_phy, &pdata, sizeof(pdata)); + if (ret) + goto err1; + + pdev = platform_device_alloc("nop_usb_xceiv", 1); + if (!pdev) { + ret = -ENOMEM; + goto err1; + } + + glue->usb3_phy = pdev; + pdata.type = USB_PHY_TYPE_USB3; + + ret = platform_device_add_data(glue->usb3_phy, &pdata, sizeof(pdata)); + if (ret) + goto err2; + + ret = platform_device_add(glue->usb2_phy); + if (ret) + goto err2; + + ret = platform_device_add(glue->usb3_phy); + if (ret) + goto err3; + + return 0; + +err3: + platform_device_del(glue->usb2_phy); + +err2: + platform_device_put(glue->usb3_phy); + +err1: + platform_device_put(glue->usb2_phy); + + return ret; +} + static int __devinit dwc3_pci_probe(struct pci_dev *pci, const struct pci_device_id *id) { @@ -80,6 +139,12 @@ static int __devinit dwc3_pci_probe(struct pci_dev *pci, pci_set_power_state(pci, PCI_D0); pci_set_master(pci); + ret = dwc3_pci_register_phys(glue); + if (ret) { + dev_err(dev, "couldn't register PHYs\n"); + return ret; + } + devid = dwc3_get_device_id(); if (devid < 0) { ret = -ENOMEM; @@ -144,6 +209,8 @@ static void __devexit dwc3_pci_remove(struct pci_dev *pci) { struct dwc3_pci *glue = pci_get_drvdata(pci); + platform_device_unregister(glue->usb2_phy); + platform_device_unregister(glue->usb3_phy); dwc3_put_device_id(glue->dwc3->id); platform_device_unregister(glue->dwc3); pci_set_drvdata(pci, NULL); diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c index e4d5ca86b9da..d7da073a23fe 100644 --- a/drivers/usb/dwc3/ep0.c +++ b/drivers/usb/dwc3/ep0.c @@ -125,7 +125,6 @@ static int __dwc3_gadget_ep0_queue(struct dwc3_ep *dep, struct dwc3_request *req) { struct dwc3 *dwc = dep->dwc; - int ret = 0; req->request.actual = 0; req->request.status = -EINPROGRESS; @@ -156,16 +155,72 @@ static int __dwc3_gadget_ep0_queue(struct dwc3_ep *dep, dep->flags &= ~(DWC3_EP_PENDING_REQUEST | DWC3_EP0_DIR_IN); - } else if (dwc->delayed_status) { + + return 0; + } + + /* + * In case gadget driver asked us to delay the STATUS phase, + * handle it here. + */ + if (dwc->delayed_status) { + unsigned direction; + + direction = !dwc->ep0_expect_in; dwc->delayed_status = false; if (dwc->ep0state == EP0_STATUS_PHASE) - __dwc3_ep0_do_control_status(dwc, dwc->eps[1]); + __dwc3_ep0_do_control_status(dwc, dwc->eps[direction]); else dev_dbg(dwc->dev, "too early for delayed status\n"); + + return 0; } - return ret; + /* + * Unfortunately we have uncovered a limitation wrt the Data Phase. + * + * Section 9.4 says we can wait for the XferNotReady(DATA) event to + * come before issueing Start Transfer command, but if we do, we will + * miss situations where the host starts another SETUP phase instead of + * the DATA phase. Such cases happen at least on TD.7.6 of the Link + * Layer Compliance Suite. + * + * The problem surfaces due to the fact that in case of back-to-back + * SETUP packets there will be no XferNotReady(DATA) generated and we + * will be stuck waiting for XferNotReady(DATA) forever. + * + * By looking at tables 9-13 and 9-14 of the Databook, we can see that + * it tells us to start Data Phase right away. It also mentions that if + * we receive a SETUP phase instead of the DATA phase, core will issue + * XferComplete for the DATA phase, before actually initiating it in + * the wire, with the TRB's status set to "SETUP_PENDING". Such status + * can only be used to print some debugging logs, as the core expects + * us to go through to the STATUS phase and start a CONTROL_STATUS TRB, + * just so it completes right away, without transferring anything and, + * only then, we can go back to the SETUP phase. + * + * Because of this scenario, SNPS decided to change the programming + * model of control transfers and support on-demand transfers only for + * the STATUS phase. To fix the issue we have now, we will always wait + * for gadget driver to queue the DATA phase's struct usb_request, then + * start it right away. + * + * If we're actually in a 2-stage transfer, we will wait for + * XferNotReady(STATUS). + */ + if (dwc->three_stage_setup) { + unsigned direction; + + direction = dwc->ep0_expect_in; + dwc->ep0state = EP0_DATA_PHASE; + + __dwc3_ep0_do_control_data(dwc, dwc->eps[direction], req); + + dep->flags &= ~DWC3_EP0_DIR_IN; + } + + return 0; } int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request, @@ -207,9 +262,14 @@ out: static void dwc3_ep0_stall_and_restart(struct dwc3 *dwc) { - struct dwc3_ep *dep = dwc->eps[0]; + struct dwc3_ep *dep; + + /* reinitialize physical ep1 */ + dep = dwc->eps[1]; + dep->flags = DWC3_EP_ENABLED; /* stall is always issued on EP0 */ + dep = dwc->eps[0]; __dwc3_gadget_ep_set_halt(dep, 1); dep->flags = DWC3_EP_ENABLED; dwc->delayed_status = false; @@ -698,6 +758,7 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc, struct dwc3_trb *trb; struct dwc3_ep *ep0; u32 transferred; + u32 status; u32 length; u8 epnum; @@ -710,6 +771,17 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc, ur = &r->request; trb = dwc->ep0_trb; + + status = DWC3_TRB_SIZE_TRBSTS(trb->size); + if (status == DWC3_TRBSTS_SETUP_PENDING) { + dev_dbg(dwc->dev, "Setup Pending received\n"); + + if (r) + dwc3_gadget_giveback(ep0, r, -ECONNRESET); + + return; + } + length = trb->size & DWC3_TRB_SIZE_MASK; if (dwc->ep0_bounced) { @@ -745,8 +817,11 @@ static void dwc3_ep0_complete_status(struct dwc3 *dwc, { struct dwc3_request *r; struct dwc3_ep *dep; + struct dwc3_trb *trb; + u32 status; dep = dwc->eps[0]; + trb = dwc->ep0_trb; if (!list_empty(&dep->request_list)) { r = next_request(&dep->request_list); @@ -766,6 +841,10 @@ static void dwc3_ep0_complete_status(struct dwc3 *dwc, } } + status = DWC3_TRB_SIZE_TRBSTS(trb->size); + if (status == DWC3_TRBSTS_SETUP_PENDING) + dev_dbg(dwc->dev, "Setup Pending received\n"); + dwc->ep0state = EP0_SETUP_PHASE; dwc3_ep0_out_start(dwc); } @@ -799,12 +878,6 @@ static void dwc3_ep0_xfer_complete(struct dwc3 *dwc, } } -static void dwc3_ep0_do_control_setup(struct dwc3 *dwc, - const struct dwc3_event_depevt *event) -{ - dwc3_ep0_out_start(dwc); -} - static void __dwc3_ep0_do_control_data(struct dwc3 *dwc, struct dwc3_ep *dep, struct dwc3_request *req) { @@ -857,29 +930,6 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc, WARN_ON(ret < 0); } -static void dwc3_ep0_do_control_data(struct dwc3 *dwc, - const struct dwc3_event_depevt *event) -{ - struct dwc3_ep *dep; - struct dwc3_request *req; - - dep = dwc->eps[0]; - - if (list_empty(&dep->request_list)) { - dev_vdbg(dwc->dev, "pending request for EP0 Data phase\n"); - dep->flags |= DWC3_EP_PENDING_REQUEST; - - if (event->endpoint_number) - dep->flags |= DWC3_EP0_DIR_IN; - return; - } - - req = next_request(&dep->request_list); - dep = dwc->eps[event->endpoint_number]; - - __dwc3_ep0_do_control_data(dwc, dep, req); -} - static int dwc3_ep0_start_control_status(struct dwc3_ep *dep) { struct dwc3 *dwc = dep->dwc; @@ -911,100 +961,61 @@ static void dwc3_ep0_do_control_status(struct dwc3 *dwc, __dwc3_ep0_do_control_status(dwc, dep); } -static void dwc3_ep0_xfernotready(struct dwc3 *dwc, - const struct dwc3_event_depevt *event) +static void dwc3_ep0_end_control_data(struct dwc3 *dwc, struct dwc3_ep *dep) { - dwc->setup_packet_pending = true; - - /* - * This part is very tricky: If we have just handled - * XferNotReady(Setup) and we're now expecting a - * XferComplete but, instead, we receive another - * XferNotReady(Setup), we should STALL and restart - * the state machine. - * - * In all other cases, we just continue waiting - * for the XferComplete event. - * - * We are a little bit unsafe here because we're - * not trying to ensure that last event was, indeed, - * XferNotReady(Setup). - * - * Still, we don't expect any condition where that - * should happen and, even if it does, it would be - * another error condition. - */ - if (dwc->ep0_next_event == DWC3_EP0_COMPLETE) { - switch (event->status) { - case DEPEVT_STATUS_CONTROL_SETUP: - dev_vdbg(dwc->dev, "Unexpected XferNotReady(Setup)\n"); - dwc3_ep0_stall_and_restart(dwc); - break; - case DEPEVT_STATUS_CONTROL_DATA: - /* FALLTHROUGH */ - case DEPEVT_STATUS_CONTROL_STATUS: - /* FALLTHROUGH */ - default: - dev_vdbg(dwc->dev, "waiting for XferComplete\n"); - } + struct dwc3_gadget_ep_cmd_params params; + u32 cmd; + int ret; + if (!dep->resource_index) return; - } - - switch (event->status) { - case DEPEVT_STATUS_CONTROL_SETUP: - dev_vdbg(dwc->dev, "Control Setup\n"); - dwc->ep0state = EP0_SETUP_PHASE; + cmd = DWC3_DEPCMD_ENDTRANSFER; + cmd |= DWC3_DEPCMD_CMDIOC; + cmd |= DWC3_DEPCMD_PARAM(dep->resource_index); + memset(¶ms, 0, sizeof(params)); + ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, cmd, ¶ms); + WARN_ON_ONCE(ret); + dep->resource_index = 0; +} - dwc3_ep0_do_control_setup(dwc, event); - break; +static void dwc3_ep0_xfernotready(struct dwc3 *dwc, + const struct dwc3_event_depevt *event) +{ + dwc->setup_packet_pending = true; + switch (event->status) { case DEPEVT_STATUS_CONTROL_DATA: dev_vdbg(dwc->dev, "Control Data\n"); - dwc->ep0state = EP0_DATA_PHASE; - - if (dwc->ep0_next_event != DWC3_EP0_NRDY_DATA) { - dev_vdbg(dwc->dev, "Expected %d got %d\n", - dwc->ep0_next_event, - DWC3_EP0_NRDY_DATA); - - dwc3_ep0_stall_and_restart(dwc); - return; - } - /* - * One of the possible error cases is when Host _does_ - * request for Data Phase, but it does so on the wrong - * direction. + * We already have a DATA transfer in the controller's cache, + * if we receive a XferNotReady(DATA) we will ignore it, unless + * it's for the wrong direction. * - * Here, we already know ep0_next_event is DATA (see above), - * so we only need to check for direction. + * In that case, we must issue END_TRANSFER command to the Data + * Phase we already have started and issue SetStall on the + * control endpoint. */ if (dwc->ep0_expect_in != event->endpoint_number) { + struct dwc3_ep *dep = dwc->eps[dwc->ep0_expect_in]; + dev_vdbg(dwc->dev, "Wrong direction for Data phase\n"); + dwc3_ep0_end_control_data(dwc, dep); dwc3_ep0_stall_and_restart(dwc); return; } - dwc3_ep0_do_control_data(dwc, event); break; case DEPEVT_STATUS_CONTROL_STATUS: + if (dwc->ep0_next_event != DWC3_EP0_NRDY_STATUS) + return; + dev_vdbg(dwc->dev, "Control Status\n"); dwc->ep0state = EP0_STATUS_PHASE; - if (dwc->ep0_next_event != DWC3_EP0_NRDY_STATUS) { - dev_vdbg(dwc->dev, "Expected %d got %d\n", - dwc->ep0_next_event, - DWC3_EP0_NRDY_STATUS); - - dwc3_ep0_stall_and_restart(dwc); - return; - } - if (dwc->delayed_status) { WARN_ON_ONCE(event->endpoint_number != 1); dev_vdbg(dwc->dev, "Mass Storage delayed status\n"); diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index c2813c2b005a..c9e729a4bf65 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -434,15 +434,25 @@ static int dwc3_gadget_start_config(struct dwc3 *dwc, struct dwc3_ep *dep) static int dwc3_gadget_set_ep_config(struct dwc3 *dwc, struct dwc3_ep *dep, const struct usb_endpoint_descriptor *desc, - const struct usb_ss_ep_comp_descriptor *comp_desc) + const struct usb_ss_ep_comp_descriptor *comp_desc, + bool ignore) { struct dwc3_gadget_ep_cmd_params params; memset(¶ms, 0x00, sizeof(params)); params.param0 = DWC3_DEPCFG_EP_TYPE(usb_endpoint_type(desc)) - | DWC3_DEPCFG_MAX_PACKET_SIZE(usb_endpoint_maxp(desc)) - | DWC3_DEPCFG_BURST_SIZE(dep->endpoint.maxburst - 1); + | DWC3_DEPCFG_MAX_PACKET_SIZE(usb_endpoint_maxp(desc)); + + /* Burst size is only needed in SuperSpeed mode */ + if (dwc->gadget.speed == USB_SPEED_SUPER) { + u32 burst = dep->endpoint.maxburst - 1; + + params.param0 |= DWC3_DEPCFG_BURST_SIZE(burst); + } + + if (ignore) + params.param0 |= DWC3_DEPCFG_IGN_SEQ_NUM; params.param1 = DWC3_DEPCFG_XFER_COMPLETE_EN | DWC3_DEPCFG_XFER_NOT_READY_EN; @@ -501,7 +511,8 @@ static int dwc3_gadget_set_xfer_resource(struct dwc3 *dwc, struct dwc3_ep *dep) */ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep, const struct usb_endpoint_descriptor *desc, - const struct usb_ss_ep_comp_descriptor *comp_desc) + const struct usb_ss_ep_comp_descriptor *comp_desc, + bool ignore) { struct dwc3 *dwc = dep->dwc; u32 reg; @@ -513,7 +524,7 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep, return ret; } - ret = dwc3_gadget_set_ep_config(dwc, dep, desc, comp_desc); + ret = dwc3_gadget_set_ep_config(dwc, dep, desc, comp_desc, ignore); if (ret) return ret; @@ -561,27 +572,7 @@ static void dwc3_remove_requests(struct dwc3 *dwc, struct dwc3_ep *dep) if (!list_empty(&dep->req_queued)) { dwc3_stop_active_transfer(dwc, dep->number); - /* - * NOTICE: We are violating what the Databook says about the - * EndTransfer command. Ideally we would _always_ wait for the - * EndTransfer Command Completion IRQ, but that's causing too - * much trouble synchronizing between us and gadget driver. - * - * We have discussed this with the IP Provider and it was - * suggested to giveback all requests here, but give HW some - * extra time to synchronize with the interconnect. We're using - * an arbitraty 100us delay for that. - * - * Note also that a similar handling was tested by Synopsys - * (thanks a lot Paul) and nothing bad has come out of it. - * In short, what we're doing is: - * - * - Issue EndTransfer WITH CMDIOC bit set - * - Wait 100us - * - giveback all requests to gadget driver - */ - udelay(100); - + /* - giveback all requests to gadget driver */ while (!list_empty(&dep->req_queued)) { req = next_request(&dep->req_queued); @@ -660,6 +651,12 @@ static int dwc3_gadget_ep_enable(struct usb_ep *ep, dep = to_dwc3_ep(ep); dwc = dep->dwc; + if (dep->flags & DWC3_EP_ENABLED) { + dev_WARN_ONCE(dwc->dev, true, "%s is already enabled\n", + dep->name); + return 0; + } + switch (usb_endpoint_type(desc)) { case USB_ENDPOINT_XFER_CONTROL: strlcat(dep->name, "-control", sizeof(dep->name)); @@ -677,16 +674,10 @@ static int dwc3_gadget_ep_enable(struct usb_ep *ep, dev_err(dwc->dev, "invalid endpoint transfer type\n"); } - if (dep->flags & DWC3_EP_ENABLED) { - dev_WARN_ONCE(dwc->dev, true, "%s is already enabled\n", - dep->name); - return 0; - } - dev_vdbg(dwc->dev, "Enabling %s\n", dep->name); spin_lock_irqsave(&dwc->lock, flags); - ret = __dwc3_gadget_ep_enable(dep, desc, ep->comp_desc); + ret = __dwc3_gadget_ep_enable(dep, desc, ep->comp_desc, false); spin_unlock_irqrestore(&dwc->lock, flags); return ret; @@ -1105,12 +1096,9 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req) } ret = __dwc3_gadget_kick_transfer(dep, 0, true); - if (ret && ret != -EBUSY) { - struct dwc3 *dwc = dep->dwc; - + if (ret && ret != -EBUSY) dev_dbg(dwc->dev, "%s: failed to kick transfers\n", dep->name); - } } /* @@ -1119,16 +1107,14 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req) * core may not see the modified TRB(s). */ if (usb_endpoint_xfer_isoc(dep->endpoint.desc) && - (dep->flags & DWC3_EP_BUSY)) { + (dep->flags & DWC3_EP_BUSY) && + !(dep->flags & DWC3_EP_MISSED_ISOC)) { WARN_ON_ONCE(!dep->resource_index); ret = __dwc3_gadget_kick_transfer(dep, dep->resource_index, false); - if (ret && ret != -EBUSY) { - struct dwc3 *dwc = dep->dwc; - + if (ret && ret != -EBUSY) dev_dbg(dwc->dev, "%s: failed to kick transfers\n", dep->name); - } } /* @@ -1533,14 +1519,14 @@ static int dwc3_gadget_start(struct usb_gadget *g, dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512); dep = dwc->eps[0]; - ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL); + ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, false); if (ret) { dev_err(dwc->dev, "failed to enable %s\n", dep->name); goto err0; } dep = dwc->eps[1]; - ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL); + ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, false); if (ret) { dev_err(dwc->dev, "failed to enable %s\n", dep->name); goto err1; @@ -1765,7 +1751,7 @@ static void dwc3_endpoint_transfer_complete(struct dwc3 *dwc, int i; for (i = 0; i < DWC3_ENDPOINTS_NUM; i++) { - struct dwc3_ep *dep = dwc->eps[i]; + dep = dwc->eps[i]; if (!(dep->flags & DWC3_EP_ENABLED)) continue; @@ -1892,6 +1878,25 @@ static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum) if (!dep->resource_index) return; + /* + * NOTICE: We are violating what the Databook says about the + * EndTransfer command. Ideally we would _always_ wait for the + * EndTransfer Command Completion IRQ, but that's causing too + * much trouble synchronizing between us and gadget driver. + * + * We have discussed this with the IP Provider and it was + * suggested to giveback all requests here, but give HW some + * extra time to synchronize with the interconnect. We're using + * an arbitraty 100us delay for that. + * + * Note also that a similar handling was tested by Synopsys + * (thanks a lot Paul) and nothing bad has come out of it. + * In short, what we're doing is: + * + * - Issue EndTransfer WITH CMDIOC bit set + * - Wait 100us + */ + cmd = DWC3_DEPCMD_ENDTRANSFER; cmd |= DWC3_DEPCMD_HIPRI_FORCERM | DWC3_DEPCMD_CMDIOC; cmd |= DWC3_DEPCMD_PARAM(dep->resource_index); @@ -1899,6 +1904,8 @@ static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum) ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, cmd, ¶ms); WARN_ON_ONCE(ret); dep->resource_index = 0; + + udelay(100); } static void dwc3_stop_active_transfers(struct dwc3 *dwc) @@ -2156,14 +2163,14 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc) } dep = dwc->eps[0]; - ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL); + ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, true); if (ret) { dev_err(dwc->dev, "failed to enable %s\n", dep->name); return; } dep = dwc->eps[1]; - ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL); + ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, true); if (ret) { dev_err(dwc->dev, "failed to enable %s\n", dep->name); return; diff --git a/drivers/usb/early/ehci-dbgp.c b/drivers/usb/early/ehci-dbgp.c index 89dcf155d57e..e426ad626d74 100644 --- a/drivers/usb/early/ehci-dbgp.c +++ b/drivers/usb/early/ehci-dbgp.c @@ -491,7 +491,7 @@ static int ehci_wait_for_port(int port); * Return -ENODEV for any general failure * Return -EIO if wait for port fails */ -int dbgp_external_startup(void) +static int _dbgp_external_startup(void) { int devnum; struct usb_debug_descriptor dbgp_desc; @@ -613,6 +613,11 @@ err: goto try_again; return -ENODEV; } + +int dbgp_external_startup(struct usb_hcd *hcd) +{ + return xen_dbgp_external_startup(hcd) ?: _dbgp_external_startup(); +} EXPORT_SYMBOL_GPL(dbgp_external_startup); static int ehci_reset_port(int port) @@ -804,7 +809,7 @@ try_next_port: dbgp_ehci_status("ehci skip - already configured"); } - ret = dbgp_external_startup(); + ret = _dbgp_external_startup(); if (ret == -EIO) goto next_debug_port; @@ -934,7 +939,7 @@ static void early_dbgp_write(struct console *con, const char *str, u32 n) ctrl = readl(&ehci_debug->control); if (!(ctrl & DBGP_ENABLED)) { dbgp_not_safe = 1; - dbgp_external_startup(); + _dbgp_external_startup(); } else { cmd |= CMD_RUN; writel(cmd, &ehci_regs->command); @@ -974,10 +979,14 @@ struct console early_dbgp_console = { .index = -1, }; -int dbgp_reset_prep(void) +int dbgp_reset_prep(struct usb_hcd *hcd) { + int ret = xen_dbgp_reset_prep(hcd); u32 ctrl; + if (ret) + return ret; + dbgp_not_safe = 1; if (!ehci_debug) return 0; diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 51ab5fd5d468..dfb51a45496c 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -154,16 +154,25 @@ config USB_LPC32XX config USB_ATMEL_USBA tristate "Atmel USBA" - select USB_GADGET_DUALSPEED depends on AVR32 || ARCH_AT91SAM9RL || ARCH_AT91SAM9G45 help USBA is the integrated high-speed USB Device controller on the AT32AP700x, some AT91SAM9 and AT91CAP9 processors from Atmel. +config USB_BCM63XX_UDC + tristate "Broadcom BCM63xx Peripheral Controller" + depends on BCM63XX + help + Many Broadcom BCM63xx chipsets (such as the BCM6328) have a + high speed USB Device Port with support for four fixed endpoints + (plus endpoint zero). + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "bcm63xx_udc". + config USB_FSL_USB2 tristate "Freescale Highspeed USB DR Peripheral Controller" depends on FSL_SOC || ARCH_MXC - select USB_GADGET_DUALSPEED select USB_FSL_MPH_DR_OF if OF help Some of Freescale PowerPC and i.MX processors have a High Speed @@ -179,7 +188,6 @@ config USB_FSL_USB2 config USB_FUSB300 tristate "Faraday FUSB300 USB Peripheral Controller" depends on !PHYS_ADDR_T_64BIT - select USB_GADGET_DUALSPEED help Faraday usb device controller FUSB300 driver @@ -227,7 +235,6 @@ config USB_PXA25X_SMALL config USB_R8A66597 tristate "Renesas R8A66597 USB Peripheral Controller" - select USB_GADGET_DUALSPEED help R8A66597 is a discrete USB host and peripheral controller chip that supports both full and high speed USB 2.0 data transfers. @@ -240,7 +247,6 @@ config USB_R8A66597 config USB_RENESAS_USBHS_UDC tristate 'Renesas USBHS controller' depends on USB_RENESAS_USBHS - select USB_GADGET_DUALSPEED help Renesas USBHS is a discrete USB host and peripheral controller chip that supports both full and high speed USB 2.0 data transfers. @@ -268,7 +274,6 @@ config USB_PXA27X config USB_S3C_HSOTG tristate "S3C HS/OtG USB Device controller" depends on S3C_DEV_USB_HSOTG - select USB_GADGET_DUALSPEED help The Samsung S3C64XX USB2.0 high-speed gadget controller integrated into the S3C64XX series SoC. @@ -305,7 +310,6 @@ config USB_S3C2410_DEBUG config USB_S3C_HSUDC tristate "S3C2416, S3C2443 and S3C2450 USB Device Controller" depends on ARCH_S3C24XX - select USB_GADGET_DUALSPEED help Samsung's S3C2416, S3C2443 and S3C2450 is an ARM9 based SoC integrated with dual speed USB 2.0 device controller. It has @@ -315,7 +319,6 @@ config USB_S3C_HSUDC config USB_MV_UDC tristate "Marvell USB2.0 Device Controller" - select USB_GADGET_DUALSPEED help Marvell Socs (including PXA and MMP series) include a high speed USB2.0 OTG controller, which can be configured as high speed or @@ -338,14 +341,12 @@ config USB_MV_U3D config USB_GADGET_MUSB_HDRC tristate "Inventra HDRC USB Peripheral (TI, ADI, ...)" depends on USB_MUSB_HDRC - select USB_GADGET_DUALSPEED help This OTG-capable silicon IP is used in dual designs including the TI DaVinci, OMAP 243x, OMAP 343x, TUSB 6010, and ADI Blackfin config USB_M66592 tristate "Renesas M66592 USB Peripheral Controller" - select USB_GADGET_DUALSPEED help M66592 is a discrete USB peripheral controller chip that supports both full and high speed USB 2.0 data transfers. @@ -362,7 +363,6 @@ config USB_M66592 config USB_AMD5536UDC tristate "AMD5536 UDC" depends on PCI - select USB_GADGET_DUALSPEED help The AMD5536 UDC is part of the AMD Geode CS5536, an x86 southbridge. It is a USB Highspeed DMA capable USB device controller. Beside ep0 @@ -389,7 +389,6 @@ config USB_FSL_QE config USB_NET2272 tristate "PLX NET2272" - select USB_GADGET_DUALSPEED help PLX NET2272 is a USB peripheral controller which supports both full and high speed USB 2.0 data transfers. @@ -413,7 +412,6 @@ config USB_NET2272_DMA config USB_NET2280 tristate "NetChip 228x" depends on PCI - select USB_GADGET_DUALSPEED help NetChip 2280 / 2282 is a PCI based USB peripheral controller which supports both full and high speed USB 2.0 data transfers. @@ -443,7 +441,6 @@ config USB_GOKU config USB_EG20T tristate "Intel EG20T PCH/LAPIS Semiconductor IOH(ML7213/ML7831) UDC" depends on PCI - select USB_GADGET_DUALSPEED help This is a USB device driver for EG20T PCH. EG20T PCH is the platform controller hub that is used in Intel's @@ -470,8 +467,6 @@ config USB_EG20T config USB_DUMMY_HCD tristate "Dummy HCD (DEVELOPMENT)" depends on USB=y || (USB=m && USB_GADGET=m) - select USB_GADGET_DUALSPEED - select USB_GADGET_SUPERSPEED help This host controller driver emulates USB, looping all data transfer requests back to a USB "gadget driver" in the same host. The host @@ -496,18 +491,15 @@ config USB_DUMMY_HCD endmenu -# Selected by UDC drivers that support high-speed operation. -config USB_GADGET_DUALSPEED - bool - -# Selected by UDC drivers that support super-speed opperation -config USB_GADGET_SUPERSPEED - bool - depends on USB_GADGET_DUALSPEED - # # USB Gadget Drivers # + +# composite based drivers +config USB_LIBCOMPOSITE + tristate + depends on USB_GADGET + choice tristate "USB Gadget Drivers" default USB_ETH @@ -531,6 +523,7 @@ choice config USB_ZERO tristate "Gadget Zero (DEVELOPMENT)" + select USB_LIBCOMPOSITE help Gadget Zero is a two-configuration device. It either sinks and sources bulk data; or it loops back a configurable number of @@ -564,8 +557,9 @@ config USB_ZERO_HNPTEST one serve as the USB host instead (in the "B-Host" role). config USB_AUDIO - tristate "Audio Gadget (EXPERIMENTAL)" + tristate "Audio Gadget" depends on SND + select USB_LIBCOMPOSITE select SND_PCM help This Gadget Audio driver is compatible with USB Audio Class @@ -594,6 +588,7 @@ config GADGET_UAC1 config USB_ETH tristate "Ethernet Gadget (with CDC Ethernet support)" depends on NET + select USB_LIBCOMPOSITE select CRC32 help This driver implements Ethernet style communication, in one of @@ -629,6 +624,7 @@ config USB_ETH config USB_ETH_RNDIS bool "RNDIS support" depends on USB_ETH + select USB_LIBCOMPOSITE default y help Microsoft Windows XP bundles the "Remote NDIS" (RNDIS) protocol, @@ -647,6 +643,7 @@ config USB_ETH_RNDIS config USB_ETH_EEM bool "Ethernet Emulation Model (EEM) support" depends on USB_ETH + select USB_LIBCOMPOSITE default n help CDC EEM is a newer USB standard that is somewhat simpler than CDC ECM @@ -663,6 +660,7 @@ config USB_ETH_EEM config USB_G_NCM tristate "Network Control Model (NCM) support" depends on NET + select USB_LIBCOMPOSITE select CRC32 help This driver implements USB CDC NCM subclass standard. NCM is @@ -674,8 +672,7 @@ config USB_G_NCM dynamically linked module called "g_ncm". config USB_GADGETFS - tristate "Gadget Filesystem (EXPERIMENTAL)" - depends on EXPERIMENTAL + tristate "Gadget Filesystem" help This driver provides a filesystem based API that lets user mode programs implement a single-configuration USB device, including @@ -683,15 +680,12 @@ config USB_GADGETFS All endpoints, transfer speeds, and transfer types supported by the hardware are available, through read() and write() calls. - Currently, this option is still labelled as EXPERIMENTAL because - of existing race conditions in the underlying in-kernel AIO core. - Say "y" to link the driver statically, or "m" to build a dynamically linked module called "gadgetfs". config USB_FUNCTIONFS - tristate "Function Filesystem (EXPERIMENTAL)" - depends on EXPERIMENTAL + tristate "Function Filesystem" + select USB_LIBCOMPOSITE select USB_FUNCTIONFS_GENERIC if !(USB_FUNCTIONFS_ETH || USB_FUNCTIONFS_RNDIS) help The Function Filesystem (FunctionFS) lets one create USB @@ -755,6 +749,7 @@ config USB_FILE_STORAGE_TEST config USB_MASS_STORAGE tristate "Mass Storage Gadget" depends on BLOCK + select USB_LIBCOMPOSITE help The Mass Storage Gadget acts as a USB Mass Storage disk drive. As its storage repository it can use a regular file or a block @@ -770,6 +765,7 @@ config USB_MASS_STORAGE config USB_GADGET_TARGET tristate "USB Gadget Target Fabric Module" depends on TARGET_CORE + select USB_LIBCOMPOSITE help This fabric is an USB gadget. Two USB protocols are supported that is BBB or BOT (Bulk Only Transport) and UAS (USB Attached SCSI). BOT is @@ -779,6 +775,7 @@ config USB_GADGET_TARGET config USB_G_SERIAL tristate "Serial Gadget (with CDC ACM and CDC OBEX support)" + select USB_LIBCOMPOSITE help The Serial Gadget talks to the Linux-USB generic serial driver. This driver supports a CDC-ACM module option, which can be used @@ -797,8 +794,9 @@ config USB_G_SERIAL make MS-Windows work with CDC ACM. config USB_MIDI_GADGET - tristate "MIDI Gadget (EXPERIMENTAL)" - depends on SND && EXPERIMENTAL + tristate "MIDI Gadget" + depends on SND + select USB_LIBCOMPOSITE select SND_RAWMIDI help The MIDI Gadget acts as a USB Audio device, with one MIDI @@ -812,6 +810,7 @@ config USB_MIDI_GADGET config USB_G_PRINTER tristate "Printer Gadget" + select USB_LIBCOMPOSITE help The Printer Gadget channels data between the USB host and a userspace program driving the print engine. The user space @@ -828,6 +827,7 @@ config USB_G_PRINTER config USB_CDC_COMPOSITE tristate "CDC Composite Device (Ethernet and ACM)" depends on NET + select USB_LIBCOMPOSITE help This driver provides two functions in one configuration: a CDC Ethernet (ECM) link, and a CDC ACM (serial port) link. @@ -842,6 +842,7 @@ config USB_CDC_COMPOSITE config USB_G_NOKIA tristate "Nokia composite gadget" depends on PHONET + select USB_LIBCOMPOSITE help The Nokia composite gadget provides support for acm, obex and phonet in only one composite gadget driver. @@ -852,6 +853,7 @@ config USB_G_NOKIA config USB_G_ACM_MS tristate "CDC Composite Device (ACM and mass storage)" depends on BLOCK + select USB_LIBCOMPOSITE help This driver provides two functions in one configuration: a mass storage, and a CDC ACM (serial port) link. @@ -860,9 +862,10 @@ config USB_G_ACM_MS dynamically linked module called "g_acm_ms". config USB_G_MULTI - tristate "Multifunction Composite Gadget (EXPERIMENTAL)" + tristate "Multifunction Composite Gadget" depends on BLOCK && NET select USB_G_MULTI_CDC if !USB_G_MULTI_RNDIS + select USB_LIBCOMPOSITE help The Multifunction Composite Gadget provides Ethernet (RNDIS and/or CDC Ethernet), mass storage and ACM serial link @@ -903,6 +906,7 @@ config USB_G_MULTI_CDC config USB_G_HID tristate "HID Gadget" + select USB_LIBCOMPOSITE help The HID gadget driver provides generic emulation of USB Human Interface Devices (HID). @@ -913,8 +917,10 @@ config USB_G_HID Say "y" to link the driver statically, or "m" to build a dynamically linked module called "g_hid". +# Standalone / single function gadgets config USB_G_DBGP tristate "EHCI Debug Device Gadget" + select USB_LIBCOMPOSITE help This gadget emulates an EHCI Debug device. This is useful when you want to interact with an EHCI Debug Port. diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile index 3fd8cd09d2c1..307be5fa824c 100644 --- a/drivers/usb/gadget/Makefile +++ b/drivers/usb/gadget/Makefile @@ -4,6 +4,9 @@ ccflags-$(CONFIG_USB_GADGET_DEBUG) := -DDEBUG obj-$(CONFIG_USB_GADGET) += udc-core.o +obj-$(CONFIG_USB_LIBCOMPOSITE) += libcomposite.o +libcomposite-y := usbstring.o config.o epautoconf.o +libcomposite-y += composite.o obj-$(CONFIG_USB_DUMMY_HCD) += dummy_hcd.o obj-$(CONFIG_USB_NET2272) += net2272.o obj-$(CONFIG_USB_NET2280) += net2280.o @@ -16,6 +19,7 @@ obj-$(CONFIG_USB_OMAP) += omap_udc.o obj-$(CONFIG_USB_S3C2410) += s3c2410_udc.o obj-$(CONFIG_USB_AT91) += at91_udc.o obj-$(CONFIG_USB_ATMEL_USBA) += atmel_usba_udc.o +obj-$(CONFIG_USB_BCM63XX_UDC) += bcm63xx_udc.o obj-$(CONFIG_USB_FSL_USB2) += fsl_usb2_udc.o fsl_usb2_udc-y := fsl_udc_core.o fsl_usb2_udc-$(CONFIG_ARCH_MXC) += fsl_mxc_udc.o diff --git a/drivers/usb/gadget/acm_ms.c b/drivers/usb/gadget/acm_ms.c index 75b8a691fd00..5a7f289805ff 100644 --- a/drivers/usb/gadget/acm_ms.c +++ b/drivers/usb/gadget/acm_ms.c @@ -15,7 +15,7 @@ */ #include <linux/kernel.h> -#include <linux/utsname.h> +#include <linux/module.h> #include "u_serial.h" @@ -41,15 +41,12 @@ * a "gcc --combine ... part1.c part2.c part3.c ... " build would. */ -#include "composite.c" -#include "usbstring.c" -#include "config.c" -#include "epautoconf.c" #include "u_serial.c" #include "f_acm.c" #include "f_mass_storage.c" /*-------------------------------------------------------------------------*/ +USB_GADGET_COMPOSITE_OPTIONS(); static struct usb_device_descriptor device_desc = { .bLength = sizeof device_desc, @@ -89,17 +86,11 @@ static const struct usb_descriptor_header *otg_desc[] = { NULL, }; - /* string IDs are assigned dynamically */ - -#define STRING_MANUFACTURER_IDX 0 -#define STRING_PRODUCT_IDX 1 - -static char manufacturer[50]; - static struct usb_string strings_dev[] = { - [STRING_MANUFACTURER_IDX].s = manufacturer, - [STRING_PRODUCT_IDX].s = DRIVER_DESC, + [USB_GADGET_MANUFACTURER_IDX].s = "", + [USB_GADGET_PRODUCT_IDX].s = DRIVER_DESC, + [USB_GADGET_SERIAL_IDX].s = "", { } /* end of list */ }; @@ -157,7 +148,6 @@ static struct usb_configuration acm_ms_config_driver = { static int __init acm_ms_bind(struct usb_composite_dev *cdev) { - int gcnum; struct usb_gadget *gadget = cdev->gadget; int status; void *retp; @@ -174,44 +164,22 @@ static int __init acm_ms_bind(struct usb_composite_dev *cdev) goto fail0; } - /* set bcdDevice */ - gcnum = usb_gadget_controller_number(gadget); - if (gcnum >= 0) { - device_desc.bcdDevice = cpu_to_le16(0x0300 | gcnum); - } else { - WARNING(cdev, "controller '%s' not recognized; trying %s\n", - gadget->name, - acm_ms_config_driver.label); - device_desc.bcdDevice = - cpu_to_le16(0x0300 | 0x0099); - } - /* * Allocate string descriptor numbers ... note that string * contents can be overridden by the composite_dev glue. */ - - /* device descriptor strings: manufacturer, product */ - snprintf(manufacturer, sizeof manufacturer, "%s %s with %s", - init_utsname()->sysname, init_utsname()->release, - gadget->name); - status = usb_string_id(cdev); - if (status < 0) - goto fail1; - strings_dev[STRING_MANUFACTURER_IDX].id = status; - device_desc.iManufacturer = status; - - status = usb_string_id(cdev); + status = usb_string_ids_tab(cdev, strings_dev); if (status < 0) goto fail1; - strings_dev[STRING_PRODUCT_IDX].id = status; - device_desc.iProduct = status; + device_desc.iManufacturer = strings_dev[USB_GADGET_MANUFACTURER_IDX].id; + device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id; /* register our configuration */ status = usb_add_config(cdev, &acm_ms_config_driver, acm_ms_do_config); if (status < 0) goto fail1; + usb_composite_overwrite_options(cdev, &coverwrite); dev_info(&gadget->dev, "%s, version: " DRIVER_VERSION "\n", DRIVER_DESC); fsg_common_put(&fsg_common); @@ -232,11 +200,12 @@ static int __exit acm_ms_unbind(struct usb_composite_dev *cdev) return 0; } -static struct usb_composite_driver acm_ms_driver = { +static __refdata struct usb_composite_driver acm_ms_driver = { .name = "g_acm_ms", .dev = &device_desc, .max_speed = USB_SPEED_SUPER, .strings = dev_strings, + .bind = acm_ms_bind, .unbind = __exit_p(acm_ms_unbind), }; @@ -246,7 +215,7 @@ MODULE_LICENSE("GPL v2"); static int __init init(void) { - return usb_composite_probe(&acm_ms_driver, acm_ms_bind); + return usb_composite_probe(&acm_ms_driver); } module_init(init); diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c index 187d21181cd5..fc0ec5e0d58e 100644 --- a/drivers/usb/gadget/amd5536udc.c +++ b/drivers/usb/gadget/amd5536udc.c @@ -1401,7 +1401,7 @@ static int udc_wakeup(struct usb_gadget *gadget) } static int amd5536_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)); + int (*bind)(struct usb_gadget *, struct usb_gadget_driver *)); static int amd5536_stop(struct usb_gadget_driver *driver); /* gadget operations */ static const struct usb_gadget_ops udc_ops = { @@ -1914,7 +1914,7 @@ static int setup_ep0(struct udc *dev) /* Called by gadget driver to register itself */ static int amd5536_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)) + int (*bind)(struct usb_gadget *, struct usb_gadget_driver *)) { struct udc *dev = udc; int retval; @@ -1932,7 +1932,7 @@ static int amd5536_start(struct usb_gadget_driver *driver, dev->driver = driver; dev->gadget.dev.driver = &driver->driver; - retval = bind(&dev->gadget); + retval = bind(&dev->gadget, driver); /* Some gadget drivers use both ep0 directions. * NOTE: to gadget driver, ep0 is just one endpoint... diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c index 1e35963bd4ed..89d90b5fb787 100644 --- a/drivers/usb/gadget/at91_udc.c +++ b/drivers/usb/gadget/at91_udc.c @@ -469,7 +469,7 @@ static int at91_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) { struct at91_ep *ep = container_of(_ep, struct at91_ep, ep); - struct at91_udc *udc = ep->udc; + struct at91_udc *udc; u16 maxpacket; u32 tmp; unsigned long flags; @@ -483,6 +483,7 @@ static int at91_ep_enable(struct usb_ep *_ep, return -EINVAL; } + udc = ep->udc; if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN) { DBG("bogus device state\n"); return -ESHUTDOWN; @@ -1699,7 +1700,7 @@ static int __devinit at91udc_probe(struct platform_device *pdev) int retval; struct resource *res; - if (!dev->platform_data) { + if (!dev->platform_data && !pdev->dev.of_node) { /* small (so we copy it) but critical! */ DBG("missing platform_data\n"); return -ENODEV; diff --git a/drivers/usb/gadget/audio.c b/drivers/usb/gadget/audio.c index 98899244860e..231b0efe8fdc 100644 --- a/drivers/usb/gadget/audio.c +++ b/drivers/usb/gadget/audio.c @@ -12,35 +12,21 @@ /* #define VERBOSE_DEBUG */ #include <linux/kernel.h> -#include <linux/utsname.h> +#include <linux/module.h> +#include <linux/usb/composite.h> +#include "gadget_chips.h" #define DRIVER_DESC "Linux USB Audio Gadget" #define DRIVER_VERSION "Feb 2, 2012" -/*-------------------------------------------------------------------------*/ - -/* - * Kbuild is not very cooperative with respect to linking separately - * compiled library objects into one module. So for now we won't use - * separate compilation ... ensuring init/exit sections work to shrink - * the runtime footprint, and giving us at least some parts of what - * a "gcc --combine ... part1.c part2.c part3.c ... " build would. - */ -#include "composite.c" -#include "usbstring.c" -#include "config.c" -#include "epautoconf.c" +USB_GADGET_COMPOSITE_OPTIONS(); /* string IDs are assigned dynamically */ -#define STRING_MANUFACTURER_IDX 0 -#define STRING_PRODUCT_IDX 1 - -static char manufacturer[50]; - static struct usb_string strings_dev[] = { - [STRING_MANUFACTURER_IDX].s = manufacturer, - [STRING_PRODUCT_IDX].s = DRIVER_DESC, + [USB_GADGET_MANUFACTURER_IDX].s = "", + [USB_GADGET_PRODUCT_IDX].s = DRIVER_DESC, + [USB_GADGET_SERIAL_IDX].s = "", { } /* end of list */ }; @@ -149,39 +135,18 @@ static struct usb_configuration audio_config_driver = { static int __init audio_bind(struct usb_composite_dev *cdev) { - int gcnum; int status; - gcnum = usb_gadget_controller_number(cdev->gadget); - if (gcnum >= 0) - device_desc.bcdDevice = cpu_to_le16(0x0300 | gcnum); - else { - ERROR(cdev, "controller '%s' not recognized; trying %s\n", - cdev->gadget->name, - audio_config_driver.label); - device_desc.bcdDevice = - __constant_cpu_to_le16(0x0300 | 0x0099); - } - - /* device descriptor strings: manufacturer, product */ - snprintf(manufacturer, sizeof manufacturer, "%s %s with %s", - init_utsname()->sysname, init_utsname()->release, - cdev->gadget->name); - status = usb_string_id(cdev); - if (status < 0) - goto fail; - strings_dev[STRING_MANUFACTURER_IDX].id = status; - device_desc.iManufacturer = status; - - status = usb_string_id(cdev); + status = usb_string_ids_tab(cdev, strings_dev); if (status < 0) goto fail; - strings_dev[STRING_PRODUCT_IDX].id = status; - device_desc.iProduct = status; + device_desc.iManufacturer = strings_dev[USB_GADGET_MANUFACTURER_IDX].id; + device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id; status = usb_add_config(cdev, &audio_config_driver, audio_do_config); if (status < 0) goto fail; + usb_composite_overwrite_options(cdev, &coverwrite); INFO(cdev, "%s, version: %s\n", DRIVER_DESC, DRIVER_VERSION); return 0; @@ -198,17 +163,18 @@ static int __exit audio_unbind(struct usb_composite_dev *cdev) return 0; } -static struct usb_composite_driver audio_driver = { +static __refdata struct usb_composite_driver audio_driver = { .name = "g_audio", .dev = &device_desc, .strings = audio_strings, .max_speed = USB_SPEED_HIGH, + .bind = audio_bind, .unbind = __exit_p(audio_unbind), }; static int __init init(void) { - return usb_composite_probe(&audio_driver, audio_bind); + return usb_composite_probe(&audio_driver); } module_init(init); diff --git a/drivers/usb/gadget/bcm63xx_udc.c b/drivers/usb/gadget/bcm63xx_udc.c new file mode 100644 index 000000000000..9ca792224cd4 --- /dev/null +++ b/drivers/usb/gadget/bcm63xx_udc.c @@ -0,0 +1,2464 @@ +/* + * bcm63xx_udc.c -- BCM63xx UDC high/full speed USB device controller + * + * Copyright (C) 2012 Kevin Cernekee <cernekee@gmail.com> + * Copyright (C) 2012 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/bitops.h> +#include <linux/bug.h> +#include <linux/clk.h> +#include <linux/compiler.h> +#include <linux/debugfs.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/dma-mapping.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/kconfig.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/platform_device.h> +#include <linux/sched.h> +#include <linux/seq_file.h> +#include <linux/slab.h> +#include <linux/timer.h> +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> +#include <linux/workqueue.h> + +#include <bcm63xx_cpu.h> +#include <bcm63xx_iudma.h> +#include <bcm63xx_dev_usb_usbd.h> +#include <bcm63xx_io.h> +#include <bcm63xx_regs.h> + +#define DRV_MODULE_NAME "bcm63xx_udc" + +static const char bcm63xx_ep0name[] = "ep0"; +static const char *const bcm63xx_ep_name[] = { + bcm63xx_ep0name, + "ep1in-bulk", "ep2out-bulk", "ep3in-int", "ep4out-int", +}; + +static bool use_fullspeed; +module_param(use_fullspeed, bool, S_IRUGO); +MODULE_PARM_DESC(use_fullspeed, "true for fullspeed only"); + +/* + * RX IRQ coalescing options: + * + * false (default) - one IRQ per DATAx packet. Slow but reliable. The + * driver is able to pass the "testusb" suite and recover from conditions like: + * + * 1) Device queues up a 2048-byte RX IUDMA transaction on an OUT bulk ep + * 2) Host sends 512 bytes of data + * 3) Host decides to reconfigure the device and sends SET_INTERFACE + * 4) Device shuts down the endpoint and cancels the RX transaction + * + * true - one IRQ per transfer, for transfers <= 2048B. Generates + * considerably fewer IRQs, but error recovery is less robust. Does not + * reliably pass "testusb". + * + * TX always uses coalescing, because we can cancel partially complete TX + * transfers by repeatedly flushing the FIFO. The hardware doesn't allow + * this on RX. + */ +static bool irq_coalesce; +module_param(irq_coalesce, bool, S_IRUGO); +MODULE_PARM_DESC(irq_coalesce, "take one IRQ per RX transfer"); + +#define BCM63XX_NUM_EP 5 +#define BCM63XX_NUM_IUDMA 6 +#define BCM63XX_NUM_FIFO_PAIRS 3 + +#define IUDMA_RESET_TIMEOUT_US 10000 + +#define IUDMA_EP0_RXCHAN 0 +#define IUDMA_EP0_TXCHAN 1 + +#define IUDMA_MAX_FRAGMENT 2048 +#define BCM63XX_MAX_CTRL_PKT 64 + +#define BCMEP_CTRL 0x00 +#define BCMEP_ISOC 0x01 +#define BCMEP_BULK 0x02 +#define BCMEP_INTR 0x03 + +#define BCMEP_OUT 0x00 +#define BCMEP_IN 0x01 + +#define BCM63XX_SPD_FULL 1 +#define BCM63XX_SPD_HIGH 0 + +#define IUDMA_DMAC_OFFSET 0x200 +#define IUDMA_DMAS_OFFSET 0x400 + +enum bcm63xx_ep0_state { + EP0_REQUEUE, + EP0_IDLE, + EP0_IN_DATA_PHASE_SETUP, + EP0_IN_DATA_PHASE_COMPLETE, + EP0_OUT_DATA_PHASE_SETUP, + EP0_OUT_DATA_PHASE_COMPLETE, + EP0_OUT_STATUS_PHASE, + EP0_IN_FAKE_STATUS_PHASE, + EP0_SHUTDOWN, +}; + +static const char __maybe_unused bcm63xx_ep0_state_names[][32] = { + "REQUEUE", + "IDLE", + "IN_DATA_PHASE_SETUP", + "IN_DATA_PHASE_COMPLETE", + "OUT_DATA_PHASE_SETUP", + "OUT_DATA_PHASE_COMPLETE", + "OUT_STATUS_PHASE", + "IN_FAKE_STATUS_PHASE", + "SHUTDOWN", +}; + +/** + * struct iudma_ch_cfg - Static configuration for an IUDMA channel. + * @ep_num: USB endpoint number. + * @n_bds: Number of buffer descriptors in the ring. + * @ep_type: Endpoint type (control, bulk, interrupt). + * @dir: Direction (in, out). + * @n_fifo_slots: Number of FIFO entries to allocate for this channel. + * @max_pkt_hs: Maximum packet size in high speed mode. + * @max_pkt_fs: Maximum packet size in full speed mode. + */ +struct iudma_ch_cfg { + int ep_num; + int n_bds; + int ep_type; + int dir; + int n_fifo_slots; + int max_pkt_hs; + int max_pkt_fs; +}; + +static const struct iudma_ch_cfg iudma_defaults[] = { + + /* This controller was designed to support a CDC/RNDIS application. + It may be possible to reconfigure some of the endpoints, but + the hardware limitations (FIFO sizing and number of DMA channels) + may significantly impact flexibility and/or stability. Change + these values at your own risk. + + ep_num ep_type n_fifo_slots max_pkt_fs + idx | n_bds | dir | max_pkt_hs | + | | | | | | | | */ + [0] = { -1, 4, BCMEP_CTRL, BCMEP_OUT, 32, 64, 64 }, + [1] = { 0, 4, BCMEP_CTRL, BCMEP_OUT, 32, 64, 64 }, + [2] = { 2, 16, BCMEP_BULK, BCMEP_OUT, 128, 512, 64 }, + [3] = { 1, 16, BCMEP_BULK, BCMEP_IN, 128, 512, 64 }, + [4] = { 4, 4, BCMEP_INTR, BCMEP_OUT, 32, 64, 64 }, + [5] = { 3, 4, BCMEP_INTR, BCMEP_IN, 32, 64, 64 }, +}; + +struct bcm63xx_udc; + +/** + * struct iudma_ch - Represents the current state of a single IUDMA channel. + * @ch_idx: IUDMA channel index (0 to BCM63XX_NUM_IUDMA-1). + * @ep_num: USB endpoint number. -1 for ep0 RX. + * @enabled: Whether bcm63xx_ep_enable() has been called. + * @max_pkt: "Chunk size" on the USB interface. Based on interface speed. + * @is_tx: true for TX, false for RX. + * @bep: Pointer to the associated endpoint. NULL for ep0 RX. + * @udc: Reference to the device controller. + * @read_bd: Next buffer descriptor to reap from the hardware. + * @write_bd: Next BD available for a new packet. + * @end_bd: Points to the final BD in the ring. + * @n_bds_used: Number of BD entries currently occupied. + * @bd_ring: Base pointer to the BD ring. + * @bd_ring_dma: Physical (DMA) address of bd_ring. + * @n_bds: Total number of BDs in the ring. + * + * ep0 has two IUDMA channels (IUDMA_EP0_RXCHAN and IUDMA_EP0_TXCHAN), as it is + * bidirectional. The "struct usb_ep" associated with ep0 is for TX (IN) + * only. + * + * Each bulk/intr endpoint has a single IUDMA channel and a single + * struct usb_ep. + */ +struct iudma_ch { + unsigned int ch_idx; + int ep_num; + bool enabled; + int max_pkt; + bool is_tx; + struct bcm63xx_ep *bep; + struct bcm63xx_udc *udc; + + struct bcm_enet_desc *read_bd; + struct bcm_enet_desc *write_bd; + struct bcm_enet_desc *end_bd; + int n_bds_used; + + struct bcm_enet_desc *bd_ring; + dma_addr_t bd_ring_dma; + unsigned int n_bds; +}; + +/** + * struct bcm63xx_ep - Internal (driver) state of a single endpoint. + * @ep_num: USB endpoint number. + * @iudma: Pointer to IUDMA channel state. + * @ep: USB gadget layer representation of the EP. + * @udc: Reference to the device controller. + * @queue: Linked list of outstanding requests for this EP. + * @halted: 1 if the EP is stalled; 0 otherwise. + */ +struct bcm63xx_ep { + unsigned int ep_num; + struct iudma_ch *iudma; + struct usb_ep ep; + struct bcm63xx_udc *udc; + struct list_head queue; + unsigned halted:1; +}; + +/** + * struct bcm63xx_req - Internal (driver) state of a single request. + * @queue: Links back to the EP's request list. + * @req: USB gadget layer representation of the request. + * @offset: Current byte offset into the data buffer (next byte to queue). + * @bd_bytes: Number of data bytes in outstanding BD entries. + * @iudma: IUDMA channel used for the request. + */ +struct bcm63xx_req { + struct list_head queue; /* ep's requests */ + struct usb_request req; + unsigned int offset; + unsigned int bd_bytes; + struct iudma_ch *iudma; +}; + +/** + * struct bcm63xx_udc - Driver/hardware private context. + * @lock: Spinlock to mediate access to this struct, and (most) HW regs. + * @dev: Generic Linux device structure. + * @pd: Platform data (board/port info). + * @usbd_clk: Clock descriptor for the USB device block. + * @usbh_clk: Clock descriptor for the USB host block. + * @gadget: USB slave device. + * @driver: Driver for USB slave devices. + * @usbd_regs: Base address of the USBD/USB20D block. + * @iudma_regs: Base address of the USBD's associated IUDMA block. + * @bep: Array of endpoints, including ep0. + * @iudma: Array of all IUDMA channels used by this controller. + * @cfg: USB configuration number, from SET_CONFIGURATION wValue. + * @iface: USB interface number, from SET_INTERFACE wIndex. + * @alt_iface: USB alt interface number, from SET_INTERFACE wValue. + * @ep0_ctrl_req: Request object for bcm63xx_udc-initiated ep0 transactions. + * @ep0_ctrl_buf: Data buffer for ep0_ctrl_req. + * @ep0state: Current state of the ep0 state machine. + * @ep0_wq: Workqueue struct used to wake up the ep0 state machine. + * @wedgemap: Bitmap of wedged endpoints. + * @ep0_req_reset: USB reset is pending. + * @ep0_req_set_cfg: Need to spoof a SET_CONFIGURATION packet. + * @ep0_req_set_iface: Need to spoof a SET_INTERFACE packet. + * @ep0_req_shutdown: Driver is shutting down; requesting ep0 to halt activity. + * @ep0_req_completed: ep0 request has completed; worker has not seen it yet. + * @ep0_reply: Pending reply from gadget driver. + * @ep0_request: Outstanding ep0 request. + * @debugfs_root: debugfs directory: /sys/kernel/debug/<DRV_MODULE_NAME>. + * @debugfs_usbd: debugfs file "usbd" for controller state. + * @debugfs_iudma: debugfs file "usbd" for IUDMA state. + */ +struct bcm63xx_udc { + spinlock_t lock; + + struct device *dev; + struct bcm63xx_usbd_platform_data *pd; + struct clk *usbd_clk; + struct clk *usbh_clk; + + struct usb_gadget gadget; + struct usb_gadget_driver *driver; + + void __iomem *usbd_regs; + void __iomem *iudma_regs; + + struct bcm63xx_ep bep[BCM63XX_NUM_EP]; + struct iudma_ch iudma[BCM63XX_NUM_IUDMA]; + + int cfg; + int iface; + int alt_iface; + + struct bcm63xx_req ep0_ctrl_req; + u8 *ep0_ctrl_buf; + + int ep0state; + struct work_struct ep0_wq; + + unsigned long wedgemap; + + unsigned ep0_req_reset:1; + unsigned ep0_req_set_cfg:1; + unsigned ep0_req_set_iface:1; + unsigned ep0_req_shutdown:1; + + unsigned ep0_req_completed:1; + struct usb_request *ep0_reply; + struct usb_request *ep0_request; + + struct dentry *debugfs_root; + struct dentry *debugfs_usbd; + struct dentry *debugfs_iudma; +}; + +static const struct usb_ep_ops bcm63xx_udc_ep_ops; + +/*********************************************************************** + * Convenience functions + ***********************************************************************/ + +static inline struct bcm63xx_udc *gadget_to_udc(struct usb_gadget *g) +{ + return container_of(g, struct bcm63xx_udc, gadget); +} + +static inline struct bcm63xx_ep *our_ep(struct usb_ep *ep) +{ + return container_of(ep, struct bcm63xx_ep, ep); +} + +static inline struct bcm63xx_req *our_req(struct usb_request *req) +{ + return container_of(req, struct bcm63xx_req, req); +} + +static inline u32 usbd_readl(struct bcm63xx_udc *udc, u32 off) +{ + return bcm_readl(udc->usbd_regs + off); +} + +static inline void usbd_writel(struct bcm63xx_udc *udc, u32 val, u32 off) +{ + bcm_writel(val, udc->usbd_regs + off); +} + +static inline u32 usb_dma_readl(struct bcm63xx_udc *udc, u32 off) +{ + return bcm_readl(udc->iudma_regs + off); +} + +static inline void usb_dma_writel(struct bcm63xx_udc *udc, u32 val, u32 off) +{ + bcm_writel(val, udc->iudma_regs + off); +} + +static inline u32 usb_dmac_readl(struct bcm63xx_udc *udc, u32 off) +{ + return bcm_readl(udc->iudma_regs + IUDMA_DMAC_OFFSET + off); +} + +static inline void usb_dmac_writel(struct bcm63xx_udc *udc, u32 val, u32 off) +{ + bcm_writel(val, udc->iudma_regs + IUDMA_DMAC_OFFSET + off); +} + +static inline u32 usb_dmas_readl(struct bcm63xx_udc *udc, u32 off) +{ + return bcm_readl(udc->iudma_regs + IUDMA_DMAS_OFFSET + off); +} + +static inline void usb_dmas_writel(struct bcm63xx_udc *udc, u32 val, u32 off) +{ + bcm_writel(val, udc->iudma_regs + IUDMA_DMAS_OFFSET + off); +} + +static inline void set_clocks(struct bcm63xx_udc *udc, bool is_enabled) +{ + if (is_enabled) { + clk_enable(udc->usbh_clk); + clk_enable(udc->usbd_clk); + udelay(10); + } else { + clk_disable(udc->usbd_clk); + clk_disable(udc->usbh_clk); + } +} + +/*********************************************************************** + * Low-level IUDMA / FIFO operations + ***********************************************************************/ + +/** + * bcm63xx_ep_dma_select - Helper function to set up the init_sel signal. + * @udc: Reference to the device controller. + * @idx: Desired init_sel value. + * + * The "init_sel" signal is used as a selection index for both endpoints + * and IUDMA channels. Since these do not map 1:1, the use of this signal + * depends on the context. + */ +static void bcm63xx_ep_dma_select(struct bcm63xx_udc *udc, int idx) +{ + u32 val = usbd_readl(udc, USBD_CONTROL_REG); + + val &= ~USBD_CONTROL_INIT_SEL_MASK; + val |= idx << USBD_CONTROL_INIT_SEL_SHIFT; + usbd_writel(udc, val, USBD_CONTROL_REG); +} + +/** + * bcm63xx_set_stall - Enable/disable stall on one endpoint. + * @udc: Reference to the device controller. + * @bep: Endpoint on which to operate. + * @is_stalled: true to enable stall, false to disable. + * + * See notes in bcm63xx_update_wedge() regarding automatic clearing of + * halt/stall conditions. + */ +static void bcm63xx_set_stall(struct bcm63xx_udc *udc, struct bcm63xx_ep *bep, + bool is_stalled) +{ + u32 val; + + val = USBD_STALL_UPDATE_MASK | + (is_stalled ? USBD_STALL_ENABLE_MASK : 0) | + (bep->ep_num << USBD_STALL_EPNUM_SHIFT); + usbd_writel(udc, val, USBD_STALL_REG); +} + +/** + * bcm63xx_fifo_setup - (Re)initialize FIFO boundaries and settings. + * @udc: Reference to the device controller. + * + * These parameters depend on the USB link speed. Settings are + * per-IUDMA-channel-pair. + */ +static void bcm63xx_fifo_setup(struct bcm63xx_udc *udc) +{ + int is_hs = udc->gadget.speed == USB_SPEED_HIGH; + u32 i, val, rx_fifo_slot, tx_fifo_slot; + + /* set up FIFO boundaries and packet sizes; this is done in pairs */ + rx_fifo_slot = tx_fifo_slot = 0; + for (i = 0; i < BCM63XX_NUM_IUDMA; i += 2) { + const struct iudma_ch_cfg *rx_cfg = &iudma_defaults[i]; + const struct iudma_ch_cfg *tx_cfg = &iudma_defaults[i + 1]; + + bcm63xx_ep_dma_select(udc, i >> 1); + + val = (rx_fifo_slot << USBD_RXFIFO_CONFIG_START_SHIFT) | + ((rx_fifo_slot + rx_cfg->n_fifo_slots - 1) << + USBD_RXFIFO_CONFIG_END_SHIFT); + rx_fifo_slot += rx_cfg->n_fifo_slots; + usbd_writel(udc, val, USBD_RXFIFO_CONFIG_REG); + usbd_writel(udc, + is_hs ? rx_cfg->max_pkt_hs : rx_cfg->max_pkt_fs, + USBD_RXFIFO_EPSIZE_REG); + + val = (tx_fifo_slot << USBD_TXFIFO_CONFIG_START_SHIFT) | + ((tx_fifo_slot + tx_cfg->n_fifo_slots - 1) << + USBD_TXFIFO_CONFIG_END_SHIFT); + tx_fifo_slot += tx_cfg->n_fifo_slots; + usbd_writel(udc, val, USBD_TXFIFO_CONFIG_REG); + usbd_writel(udc, + is_hs ? tx_cfg->max_pkt_hs : tx_cfg->max_pkt_fs, + USBD_TXFIFO_EPSIZE_REG); + + usbd_readl(udc, USBD_TXFIFO_EPSIZE_REG); + } +} + +/** + * bcm63xx_fifo_reset_ep - Flush a single endpoint's FIFO. + * @udc: Reference to the device controller. + * @ep_num: Endpoint number. + */ +static void bcm63xx_fifo_reset_ep(struct bcm63xx_udc *udc, int ep_num) +{ + u32 val; + + bcm63xx_ep_dma_select(udc, ep_num); + + val = usbd_readl(udc, USBD_CONTROL_REG); + val |= USBD_CONTROL_FIFO_RESET_MASK; + usbd_writel(udc, val, USBD_CONTROL_REG); + usbd_readl(udc, USBD_CONTROL_REG); +} + +/** + * bcm63xx_fifo_reset - Flush all hardware FIFOs. + * @udc: Reference to the device controller. + */ +static void bcm63xx_fifo_reset(struct bcm63xx_udc *udc) +{ + int i; + + for (i = 0; i < BCM63XX_NUM_FIFO_PAIRS; i++) + bcm63xx_fifo_reset_ep(udc, i); +} + +/** + * bcm63xx_ep_init - Initial (one-time) endpoint initialization. + * @udc: Reference to the device controller. + */ +static void bcm63xx_ep_init(struct bcm63xx_udc *udc) +{ + u32 i, val; + + for (i = 0; i < BCM63XX_NUM_IUDMA; i++) { + const struct iudma_ch_cfg *cfg = &iudma_defaults[i]; + + if (cfg->ep_num < 0) + continue; + + bcm63xx_ep_dma_select(udc, cfg->ep_num); + val = (cfg->ep_type << USBD_EPNUM_TYPEMAP_TYPE_SHIFT) | + ((i >> 1) << USBD_EPNUM_TYPEMAP_DMA_CH_SHIFT); + usbd_writel(udc, val, USBD_EPNUM_TYPEMAP_REG); + } +} + +/** + * bcm63xx_ep_setup - Configure per-endpoint settings. + * @udc: Reference to the device controller. + * + * This needs to be rerun if the speed/cfg/intf/altintf changes. + */ +static void bcm63xx_ep_setup(struct bcm63xx_udc *udc) +{ + u32 val, i; + + usbd_writel(udc, USBD_CSR_SETUPADDR_DEF, USBD_CSR_SETUPADDR_REG); + + for (i = 0; i < BCM63XX_NUM_IUDMA; i++) { + const struct iudma_ch_cfg *cfg = &iudma_defaults[i]; + int max_pkt = udc->gadget.speed == USB_SPEED_HIGH ? + cfg->max_pkt_hs : cfg->max_pkt_fs; + int idx = cfg->ep_num; + + udc->iudma[i].max_pkt = max_pkt; + + if (idx < 0) + continue; + udc->bep[idx].ep.maxpacket = max_pkt; + + val = (idx << USBD_CSR_EP_LOG_SHIFT) | + (cfg->dir << USBD_CSR_EP_DIR_SHIFT) | + (cfg->ep_type << USBD_CSR_EP_TYPE_SHIFT) | + (udc->cfg << USBD_CSR_EP_CFG_SHIFT) | + (udc->iface << USBD_CSR_EP_IFACE_SHIFT) | + (udc->alt_iface << USBD_CSR_EP_ALTIFACE_SHIFT) | + (max_pkt << USBD_CSR_EP_MAXPKT_SHIFT); + usbd_writel(udc, val, USBD_CSR_EP_REG(idx)); + } +} + +/** + * iudma_write - Queue a single IUDMA transaction. + * @udc: Reference to the device controller. + * @iudma: IUDMA channel to use. + * @breq: Request containing the transaction data. + * + * For RX IUDMA, this will queue a single buffer descriptor, as RX IUDMA + * does not honor SOP/EOP so the handling of multiple buffers is ambiguous. + * So iudma_write() may be called several times to fulfill a single + * usb_request. + * + * For TX IUDMA, this can queue multiple buffer descriptors if needed. + */ +static void iudma_write(struct bcm63xx_udc *udc, struct iudma_ch *iudma, + struct bcm63xx_req *breq) +{ + int first_bd = 1, last_bd = 0, extra_zero_pkt = 0; + unsigned int bytes_left = breq->req.length - breq->offset; + const int max_bd_bytes = !irq_coalesce && !iudma->is_tx ? + iudma->max_pkt : IUDMA_MAX_FRAGMENT; + + iudma->n_bds_used = 0; + breq->bd_bytes = 0; + breq->iudma = iudma; + + if ((bytes_left % iudma->max_pkt == 0) && bytes_left && breq->req.zero) + extra_zero_pkt = 1; + + do { + struct bcm_enet_desc *d = iudma->write_bd; + u32 dmaflags = 0; + unsigned int n_bytes; + + if (d == iudma->end_bd) { + dmaflags |= DMADESC_WRAP_MASK; + iudma->write_bd = iudma->bd_ring; + } else { + iudma->write_bd++; + } + iudma->n_bds_used++; + + n_bytes = min_t(int, bytes_left, max_bd_bytes); + if (n_bytes) + dmaflags |= n_bytes << DMADESC_LENGTH_SHIFT; + else + dmaflags |= (1 << DMADESC_LENGTH_SHIFT) | + DMADESC_USB_ZERO_MASK; + + dmaflags |= DMADESC_OWNER_MASK; + if (first_bd) { + dmaflags |= DMADESC_SOP_MASK; + first_bd = 0; + } + + /* + * extra_zero_pkt forces one more iteration through the loop + * after all data is queued up, to send the zero packet + */ + if (extra_zero_pkt && !bytes_left) + extra_zero_pkt = 0; + + if (!iudma->is_tx || iudma->n_bds_used == iudma->n_bds || + (n_bytes == bytes_left && !extra_zero_pkt)) { + last_bd = 1; + dmaflags |= DMADESC_EOP_MASK; + } + + d->address = breq->req.dma + breq->offset; + mb(); + d->len_stat = dmaflags; + + breq->offset += n_bytes; + breq->bd_bytes += n_bytes; + bytes_left -= n_bytes; + } while (!last_bd); + + usb_dmac_writel(udc, ENETDMAC_CHANCFG_EN_MASK, + ENETDMAC_CHANCFG_REG(iudma->ch_idx)); +} + +/** + * iudma_read - Check for IUDMA buffer completion. + * @udc: Reference to the device controller. + * @iudma: IUDMA channel to use. + * + * This checks to see if ALL of the outstanding BDs on the DMA channel + * have been filled. If so, it returns the actual transfer length; + * otherwise it returns -EBUSY. + */ +static int iudma_read(struct bcm63xx_udc *udc, struct iudma_ch *iudma) +{ + int i, actual_len = 0; + struct bcm_enet_desc *d = iudma->read_bd; + + if (!iudma->n_bds_used) + return -EINVAL; + + for (i = 0; i < iudma->n_bds_used; i++) { + u32 dmaflags; + + dmaflags = d->len_stat; + + if (dmaflags & DMADESC_OWNER_MASK) + return -EBUSY; + + actual_len += (dmaflags & DMADESC_LENGTH_MASK) >> + DMADESC_LENGTH_SHIFT; + if (d == iudma->end_bd) + d = iudma->bd_ring; + else + d++; + } + + iudma->read_bd = d; + iudma->n_bds_used = 0; + return actual_len; +} + +/** + * iudma_reset_channel - Stop DMA on a single channel. + * @udc: Reference to the device controller. + * @iudma: IUDMA channel to reset. + */ +static void iudma_reset_channel(struct bcm63xx_udc *udc, struct iudma_ch *iudma) +{ + int timeout = IUDMA_RESET_TIMEOUT_US; + struct bcm_enet_desc *d; + int ch_idx = iudma->ch_idx; + + if (!iudma->is_tx) + bcm63xx_fifo_reset_ep(udc, max(0, iudma->ep_num)); + + /* stop DMA, then wait for the hardware to wrap up */ + usb_dmac_writel(udc, 0, ENETDMAC_CHANCFG_REG(ch_idx)); + + while (usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG(ch_idx)) & + ENETDMAC_CHANCFG_EN_MASK) { + udelay(1); + + /* repeatedly flush the FIFO data until the BD completes */ + if (iudma->is_tx && iudma->ep_num >= 0) + bcm63xx_fifo_reset_ep(udc, iudma->ep_num); + + if (!timeout--) { + dev_err(udc->dev, "can't reset IUDMA channel %d\n", + ch_idx); + break; + } + if (timeout == IUDMA_RESET_TIMEOUT_US / 2) { + dev_warn(udc->dev, "forcibly halting IUDMA channel %d\n", + ch_idx); + usb_dmac_writel(udc, ENETDMAC_CHANCFG_BUFHALT_MASK, + ENETDMAC_CHANCFG_REG(ch_idx)); + } + } + usb_dmac_writel(udc, ~0, ENETDMAC_IR_REG(ch_idx)); + + /* don't leave "live" HW-owned entries for the next guy to step on */ + for (d = iudma->bd_ring; d <= iudma->end_bd; d++) + d->len_stat = 0; + mb(); + + iudma->read_bd = iudma->write_bd = iudma->bd_ring; + iudma->n_bds_used = 0; + + /* set up IRQs, UBUS burst size, and BD base for this channel */ + usb_dmac_writel(udc, ENETDMAC_IR_BUFDONE_MASK, + ENETDMAC_IRMASK_REG(ch_idx)); + usb_dmac_writel(udc, 8, ENETDMAC_MAXBURST_REG(ch_idx)); + + usb_dmas_writel(udc, iudma->bd_ring_dma, ENETDMAS_RSTART_REG(ch_idx)); + usb_dmas_writel(udc, 0, ENETDMAS_SRAM2_REG(ch_idx)); +} + +/** + * iudma_init_channel - One-time IUDMA channel initialization. + * @udc: Reference to the device controller. + * @ch_idx: Channel to initialize. + */ +static int iudma_init_channel(struct bcm63xx_udc *udc, unsigned int ch_idx) +{ + struct iudma_ch *iudma = &udc->iudma[ch_idx]; + const struct iudma_ch_cfg *cfg = &iudma_defaults[ch_idx]; + unsigned int n_bds = cfg->n_bds; + struct bcm63xx_ep *bep = NULL; + + iudma->ep_num = cfg->ep_num; + iudma->ch_idx = ch_idx; + iudma->is_tx = !!(ch_idx & 0x01); + if (iudma->ep_num >= 0) { + bep = &udc->bep[iudma->ep_num]; + bep->iudma = iudma; + INIT_LIST_HEAD(&bep->queue); + } + + iudma->bep = bep; + iudma->udc = udc; + + /* ep0 is always active; others are controlled by the gadget driver */ + if (iudma->ep_num <= 0) + iudma->enabled = true; + + iudma->n_bds = n_bds; + iudma->bd_ring = dmam_alloc_coherent(udc->dev, + n_bds * sizeof(struct bcm_enet_desc), + &iudma->bd_ring_dma, GFP_KERNEL); + if (!iudma->bd_ring) + return -ENOMEM; + iudma->end_bd = &iudma->bd_ring[n_bds - 1]; + + return 0; +} + +/** + * iudma_init - One-time initialization of all IUDMA channels. + * @udc: Reference to the device controller. + * + * Enable DMA, flush channels, and enable global IUDMA IRQs. + */ +static int iudma_init(struct bcm63xx_udc *udc) +{ + int i, rc; + + usb_dma_writel(udc, ENETDMA_CFG_EN_MASK, ENETDMA_CFG_REG); + + for (i = 0; i < BCM63XX_NUM_IUDMA; i++) { + rc = iudma_init_channel(udc, i); + if (rc) + return rc; + iudma_reset_channel(udc, &udc->iudma[i]); + } + + usb_dma_writel(udc, BIT(BCM63XX_NUM_IUDMA)-1, ENETDMA_GLB_IRQMASK_REG); + return 0; +} + +/** + * iudma_uninit - Uninitialize IUDMA channels. + * @udc: Reference to the device controller. + * + * Kill global IUDMA IRQs, flush channels, and kill DMA. + */ +static void iudma_uninit(struct bcm63xx_udc *udc) +{ + int i; + + usb_dma_writel(udc, 0, ENETDMA_GLB_IRQMASK_REG); + + for (i = 0; i < BCM63XX_NUM_IUDMA; i++) + iudma_reset_channel(udc, &udc->iudma[i]); + + usb_dma_writel(udc, 0, ENETDMA_CFG_REG); +} + +/*********************************************************************** + * Other low-level USBD operations + ***********************************************************************/ + +/** + * bcm63xx_set_ctrl_irqs - Mask/unmask control path interrupts. + * @udc: Reference to the device controller. + * @enable_irqs: true to enable, false to disable. + */ +static void bcm63xx_set_ctrl_irqs(struct bcm63xx_udc *udc, bool enable_irqs) +{ + u32 val; + + usbd_writel(udc, 0, USBD_STATUS_REG); + + val = BIT(USBD_EVENT_IRQ_USB_RESET) | + BIT(USBD_EVENT_IRQ_SETUP) | + BIT(USBD_EVENT_IRQ_SETCFG) | + BIT(USBD_EVENT_IRQ_SETINTF) | + BIT(USBD_EVENT_IRQ_USB_LINK); + usbd_writel(udc, enable_irqs ? val : 0, USBD_EVENT_IRQ_MASK_REG); + usbd_writel(udc, val, USBD_EVENT_IRQ_STATUS_REG); +} + +/** + * bcm63xx_select_phy_mode - Select between USB device and host mode. + * @udc: Reference to the device controller. + * @is_device: true for device, false for host. + * + * This should probably be reworked to use the drivers/usb/otg + * infrastructure. + * + * By default, the AFE/pullups are disabled in device mode, until + * bcm63xx_select_pullup() is called. + */ +static void bcm63xx_select_phy_mode(struct bcm63xx_udc *udc, bool is_device) +{ + u32 val, portmask = BIT(udc->pd->port_no); + + if (BCMCPU_IS_6328()) { + /* configure pinmux to sense VBUS signal */ + val = bcm_gpio_readl(GPIO_PINMUX_OTHR_REG); + val &= ~GPIO_PINMUX_OTHR_6328_USB_MASK; + val |= is_device ? GPIO_PINMUX_OTHR_6328_USB_DEV : + GPIO_PINMUX_OTHR_6328_USB_HOST; + bcm_gpio_writel(val, GPIO_PINMUX_OTHR_REG); + } + + val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG); + if (is_device) { + val |= (portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT); + val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT); + } else { + val &= ~(portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT); + val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT); + } + bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG); + + val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG); + if (is_device) + val |= USBH_PRIV_SWAP_USBD_MASK; + else + val &= ~USBH_PRIV_SWAP_USBD_MASK; + bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_SWAP_6368_REG); +} + +/** + * bcm63xx_select_pullup - Enable/disable the pullup on D+ + * @udc: Reference to the device controller. + * @is_on: true to enable the pullup, false to disable. + * + * If the pullup is active, the host will sense a FS/HS device connected to + * the port. If the pullup is inactive, the host will think the USB + * device has been disconnected. + */ +static void bcm63xx_select_pullup(struct bcm63xx_udc *udc, bool is_on) +{ + u32 val, portmask = BIT(udc->pd->port_no); + + val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG); + if (is_on) + val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT); + else + val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT); + bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG); +} + +/** + * bcm63xx_uninit_udc_hw - Shut down the hardware prior to driver removal. + * @udc: Reference to the device controller. + * + * This just masks the IUDMA IRQs and releases the clocks. It is assumed + * that bcm63xx_udc_stop() has already run, and the clocks are stopped. + */ +static void bcm63xx_uninit_udc_hw(struct bcm63xx_udc *udc) +{ + set_clocks(udc, true); + iudma_uninit(udc); + set_clocks(udc, false); + + clk_put(udc->usbd_clk); + clk_put(udc->usbh_clk); +} + +/** + * bcm63xx_init_udc_hw - Initialize the controller hardware and data structures. + * @udc: Reference to the device controller. + */ +static int bcm63xx_init_udc_hw(struct bcm63xx_udc *udc) +{ + int i, rc = 0; + u32 val; + + udc->ep0_ctrl_buf = devm_kzalloc(udc->dev, BCM63XX_MAX_CTRL_PKT, + GFP_KERNEL); + if (!udc->ep0_ctrl_buf) + return -ENOMEM; + + INIT_LIST_HEAD(&udc->gadget.ep_list); + for (i = 0; i < BCM63XX_NUM_EP; i++) { + struct bcm63xx_ep *bep = &udc->bep[i]; + + bep->ep.name = bcm63xx_ep_name[i]; + bep->ep_num = i; + bep->ep.ops = &bcm63xx_udc_ep_ops; + list_add_tail(&bep->ep.ep_list, &udc->gadget.ep_list); + bep->halted = 0; + bep->ep.maxpacket = BCM63XX_MAX_CTRL_PKT; + bep->udc = udc; + bep->ep.desc = NULL; + INIT_LIST_HEAD(&bep->queue); + } + + udc->gadget.ep0 = &udc->bep[0].ep; + list_del(&udc->bep[0].ep.ep_list); + + udc->gadget.speed = USB_SPEED_UNKNOWN; + udc->ep0state = EP0_SHUTDOWN; + + udc->usbh_clk = clk_get(udc->dev, "usbh"); + if (IS_ERR(udc->usbh_clk)) + return -EIO; + + udc->usbd_clk = clk_get(udc->dev, "usbd"); + if (IS_ERR(udc->usbd_clk)) { + clk_put(udc->usbh_clk); + return -EIO; + } + + set_clocks(udc, true); + + val = USBD_CONTROL_AUTO_CSRS_MASK | + USBD_CONTROL_DONE_CSRS_MASK | + (irq_coalesce ? USBD_CONTROL_RXZSCFG_MASK : 0); + usbd_writel(udc, val, USBD_CONTROL_REG); + + val = USBD_STRAPS_APP_SELF_PWR_MASK | + USBD_STRAPS_APP_RAM_IF_MASK | + USBD_STRAPS_APP_CSRPRGSUP_MASK | + USBD_STRAPS_APP_8BITPHY_MASK | + USBD_STRAPS_APP_RMTWKUP_MASK; + + if (udc->gadget.max_speed == USB_SPEED_HIGH) + val |= (BCM63XX_SPD_HIGH << USBD_STRAPS_SPEED_SHIFT); + else + val |= (BCM63XX_SPD_FULL << USBD_STRAPS_SPEED_SHIFT); + usbd_writel(udc, val, USBD_STRAPS_REG); + + bcm63xx_set_ctrl_irqs(udc, false); + + usbd_writel(udc, 0, USBD_EVENT_IRQ_CFG_LO_REG); + + val = USBD_EVENT_IRQ_CFG_FALLING(USBD_EVENT_IRQ_ENUM_ON) | + USBD_EVENT_IRQ_CFG_FALLING(USBD_EVENT_IRQ_SET_CSRS); + usbd_writel(udc, val, USBD_EVENT_IRQ_CFG_HI_REG); + + rc = iudma_init(udc); + set_clocks(udc, false); + if (rc) + bcm63xx_uninit_udc_hw(udc); + + return 0; +} + +/*********************************************************************** + * Standard EP gadget operations + ***********************************************************************/ + +/** + * bcm63xx_ep_enable - Enable one endpoint. + * @ep: Endpoint to enable. + * @desc: Contains max packet, direction, etc. + * + * Most of the endpoint parameters are fixed in this controller, so there + * isn't much for this function to do. + */ +static int bcm63xx_ep_enable(struct usb_ep *ep, + const struct usb_endpoint_descriptor *desc) +{ + struct bcm63xx_ep *bep = our_ep(ep); + struct bcm63xx_udc *udc = bep->udc; + struct iudma_ch *iudma = bep->iudma; + unsigned long flags; + + if (!ep || !desc || ep->name == bcm63xx_ep0name) + return -EINVAL; + + if (!udc->driver) + return -ESHUTDOWN; + + spin_lock_irqsave(&udc->lock, flags); + if (iudma->enabled) { + spin_unlock_irqrestore(&udc->lock, flags); + return -EINVAL; + } + + iudma->enabled = true; + BUG_ON(!list_empty(&bep->queue)); + + iudma_reset_channel(udc, iudma); + + bep->halted = 0; + bcm63xx_set_stall(udc, bep, false); + clear_bit(bep->ep_num, &udc->wedgemap); + + ep->desc = desc; + ep->maxpacket = usb_endpoint_maxp(desc); + + spin_unlock_irqrestore(&udc->lock, flags); + return 0; +} + +/** + * bcm63xx_ep_disable - Disable one endpoint. + * @ep: Endpoint to disable. + */ +static int bcm63xx_ep_disable(struct usb_ep *ep) +{ + struct bcm63xx_ep *bep = our_ep(ep); + struct bcm63xx_udc *udc = bep->udc; + struct iudma_ch *iudma = bep->iudma; + struct list_head *pos, *n; + unsigned long flags; + + if (!ep || !ep->desc) + return -EINVAL; + + spin_lock_irqsave(&udc->lock, flags); + if (!iudma->enabled) { + spin_unlock_irqrestore(&udc->lock, flags); + return -EINVAL; + } + iudma->enabled = false; + + iudma_reset_channel(udc, iudma); + + if (!list_empty(&bep->queue)) { + list_for_each_safe(pos, n, &bep->queue) { + struct bcm63xx_req *breq = + list_entry(pos, struct bcm63xx_req, queue); + + usb_gadget_unmap_request(&udc->gadget, &breq->req, + iudma->is_tx); + list_del(&breq->queue); + breq->req.status = -ESHUTDOWN; + + spin_unlock_irqrestore(&udc->lock, flags); + breq->req.complete(&iudma->bep->ep, &breq->req); + spin_lock_irqsave(&udc->lock, flags); + } + } + ep->desc = NULL; + + spin_unlock_irqrestore(&udc->lock, flags); + return 0; +} + +/** + * bcm63xx_udc_alloc_request - Allocate a new request. + * @ep: Endpoint associated with the request. + * @mem_flags: Flags to pass to kzalloc(). + */ +static struct usb_request *bcm63xx_udc_alloc_request(struct usb_ep *ep, + gfp_t mem_flags) +{ + struct bcm63xx_req *breq; + + breq = kzalloc(sizeof(*breq), mem_flags); + if (!breq) + return NULL; + return &breq->req; +} + +/** + * bcm63xx_udc_free_request - Free a request. + * @ep: Endpoint associated with the request. + * @req: Request to free. + */ +static void bcm63xx_udc_free_request(struct usb_ep *ep, + struct usb_request *req) +{ + struct bcm63xx_req *breq = our_req(req); + kfree(breq); +} + +/** + * bcm63xx_udc_queue - Queue up a new request. + * @ep: Endpoint associated with the request. + * @req: Request to add. + * @mem_flags: Unused. + * + * If the queue is empty, start this request immediately. Otherwise, add + * it to the list. + * + * ep0 replies are sent through this function from the gadget driver, but + * they are treated differently because they need to be handled by the ep0 + * state machine. (Sometimes they are replies to control requests that + * were spoofed by this driver, and so they shouldn't be transmitted at all.) + */ +static int bcm63xx_udc_queue(struct usb_ep *ep, struct usb_request *req, + gfp_t mem_flags) +{ + struct bcm63xx_ep *bep = our_ep(ep); + struct bcm63xx_udc *udc = bep->udc; + struct bcm63xx_req *breq = our_req(req); + unsigned long flags; + int rc = 0; + + if (unlikely(!req || !req->complete || !req->buf || !ep)) + return -EINVAL; + + req->actual = 0; + req->status = 0; + breq->offset = 0; + + if (bep == &udc->bep[0]) { + /* only one reply per request, please */ + if (udc->ep0_reply) + return -EINVAL; + + udc->ep0_reply = req; + schedule_work(&udc->ep0_wq); + return 0; + } + + spin_lock_irqsave(&udc->lock, flags); + if (!bep->iudma->enabled) { + rc = -ESHUTDOWN; + goto out; + } + + rc = usb_gadget_map_request(&udc->gadget, req, bep->iudma->is_tx); + if (rc == 0) { + list_add_tail(&breq->queue, &bep->queue); + if (list_is_singular(&bep->queue)) + iudma_write(udc, bep->iudma, breq); + } + +out: + spin_unlock_irqrestore(&udc->lock, flags); + return rc; +} + +/** + * bcm63xx_udc_dequeue - Remove a pending request from the queue. + * @ep: Endpoint associated with the request. + * @req: Request to remove. + * + * If the request is not at the head of the queue, this is easy - just nuke + * it. If the request is at the head of the queue, we'll need to stop the + * DMA transaction and then queue up the successor. + */ +static int bcm63xx_udc_dequeue(struct usb_ep *ep, struct usb_request *req) +{ + struct bcm63xx_ep *bep = our_ep(ep); + struct bcm63xx_udc *udc = bep->udc; + struct bcm63xx_req *breq = our_req(req), *cur; + unsigned long flags; + int rc = 0; + + spin_lock_irqsave(&udc->lock, flags); + if (list_empty(&bep->queue)) { + rc = -EINVAL; + goto out; + } + + cur = list_first_entry(&bep->queue, struct bcm63xx_req, queue); + usb_gadget_unmap_request(&udc->gadget, &breq->req, bep->iudma->is_tx); + + if (breq == cur) { + iudma_reset_channel(udc, bep->iudma); + list_del(&breq->queue); + + if (!list_empty(&bep->queue)) { + struct bcm63xx_req *next; + + next = list_first_entry(&bep->queue, + struct bcm63xx_req, queue); + iudma_write(udc, bep->iudma, next); + } + } else { + list_del(&breq->queue); + } + +out: + spin_unlock_irqrestore(&udc->lock, flags); + + req->status = -ESHUTDOWN; + req->complete(ep, req); + + return rc; +} + +/** + * bcm63xx_udc_set_halt - Enable/disable STALL flag in the hardware. + * @ep: Endpoint to halt. + * @value: Zero to clear halt; nonzero to set halt. + * + * See comments in bcm63xx_update_wedge(). + */ +static int bcm63xx_udc_set_halt(struct usb_ep *ep, int value) +{ + struct bcm63xx_ep *bep = our_ep(ep); + struct bcm63xx_udc *udc = bep->udc; + unsigned long flags; + + spin_lock_irqsave(&udc->lock, flags); + bcm63xx_set_stall(udc, bep, !!value); + bep->halted = value; + spin_unlock_irqrestore(&udc->lock, flags); + + return 0; +} + +/** + * bcm63xx_udc_set_wedge - Stall the endpoint until the next reset. + * @ep: Endpoint to wedge. + * + * See comments in bcm63xx_update_wedge(). + */ +static int bcm63xx_udc_set_wedge(struct usb_ep *ep) +{ + struct bcm63xx_ep *bep = our_ep(ep); + struct bcm63xx_udc *udc = bep->udc; + unsigned long flags; + + spin_lock_irqsave(&udc->lock, flags); + set_bit(bep->ep_num, &udc->wedgemap); + bcm63xx_set_stall(udc, bep, true); + spin_unlock_irqrestore(&udc->lock, flags); + + return 0; +} + +static const struct usb_ep_ops bcm63xx_udc_ep_ops = { + .enable = bcm63xx_ep_enable, + .disable = bcm63xx_ep_disable, + + .alloc_request = bcm63xx_udc_alloc_request, + .free_request = bcm63xx_udc_free_request, + + .queue = bcm63xx_udc_queue, + .dequeue = bcm63xx_udc_dequeue, + + .set_halt = bcm63xx_udc_set_halt, + .set_wedge = bcm63xx_udc_set_wedge, +}; + +/*********************************************************************** + * EP0 handling + ***********************************************************************/ + +/** + * bcm63xx_ep0_setup_callback - Drop spinlock to invoke ->setup callback. + * @udc: Reference to the device controller. + * @ctrl: 8-byte SETUP request. + */ +static int bcm63xx_ep0_setup_callback(struct bcm63xx_udc *udc, + struct usb_ctrlrequest *ctrl) +{ + int rc; + + spin_unlock_irq(&udc->lock); + rc = udc->driver->setup(&udc->gadget, ctrl); + spin_lock_irq(&udc->lock); + return rc; +} + +/** + * bcm63xx_ep0_spoof_set_cfg - Synthesize a SET_CONFIGURATION request. + * @udc: Reference to the device controller. + * + * Many standard requests are handled automatically in the hardware, but + * we still need to pass them to the gadget driver so that it can + * reconfigure the interfaces/endpoints if necessary. + * + * Unfortunately we are not able to send a STALL response if the host + * requests an invalid configuration. If this happens, we'll have to be + * content with printing a warning. + */ +static int bcm63xx_ep0_spoof_set_cfg(struct bcm63xx_udc *udc) +{ + struct usb_ctrlrequest ctrl; + int rc; + + ctrl.bRequestType = USB_DIR_OUT | USB_RECIP_DEVICE; + ctrl.bRequest = USB_REQ_SET_CONFIGURATION; + ctrl.wValue = cpu_to_le16(udc->cfg); + ctrl.wIndex = 0; + ctrl.wLength = 0; + + rc = bcm63xx_ep0_setup_callback(udc, &ctrl); + if (rc < 0) { + dev_warn_ratelimited(udc->dev, + "hardware auto-acked bad SET_CONFIGURATION(%d) request\n", + udc->cfg); + } + return rc; +} + +/** + * bcm63xx_ep0_spoof_set_iface - Synthesize a SET_INTERFACE request. + * @udc: Reference to the device controller. + */ +static int bcm63xx_ep0_spoof_set_iface(struct bcm63xx_udc *udc) +{ + struct usb_ctrlrequest ctrl; + int rc; + + ctrl.bRequestType = USB_DIR_OUT | USB_RECIP_INTERFACE; + ctrl.bRequest = USB_REQ_SET_INTERFACE; + ctrl.wValue = cpu_to_le16(udc->alt_iface); + ctrl.wIndex = cpu_to_le16(udc->iface); + ctrl.wLength = 0; + + rc = bcm63xx_ep0_setup_callback(udc, &ctrl); + if (rc < 0) { + dev_warn_ratelimited(udc->dev, + "hardware auto-acked bad SET_INTERFACE(%d,%d) request\n", + udc->iface, udc->alt_iface); + } + return rc; +} + +/** + * bcm63xx_ep0_map_write - dma_map and iudma_write a single request. + * @udc: Reference to the device controller. + * @ch_idx: IUDMA channel number. + * @req: USB gadget layer representation of the request. + */ +static void bcm63xx_ep0_map_write(struct bcm63xx_udc *udc, int ch_idx, + struct usb_request *req) +{ + struct bcm63xx_req *breq = our_req(req); + struct iudma_ch *iudma = &udc->iudma[ch_idx]; + + BUG_ON(udc->ep0_request); + udc->ep0_request = req; + + req->actual = 0; + breq->offset = 0; + usb_gadget_map_request(&udc->gadget, req, iudma->is_tx); + iudma_write(udc, iudma, breq); +} + +/** + * bcm63xx_ep0_complete - Set completion status and "stage" the callback. + * @udc: Reference to the device controller. + * @req: USB gadget layer representation of the request. + * @status: Status to return to the gadget driver. + */ +static void bcm63xx_ep0_complete(struct bcm63xx_udc *udc, + struct usb_request *req, int status) +{ + req->status = status; + if (status) + req->actual = 0; + if (req->complete) { + spin_unlock_irq(&udc->lock); + req->complete(&udc->bep[0].ep, req); + spin_lock_irq(&udc->lock); + } +} + +/** + * bcm63xx_ep0_nuke_reply - Abort request from the gadget driver due to + * reset/shutdown. + * @udc: Reference to the device controller. + * @is_tx: Nonzero for TX (IN), zero for RX (OUT). + */ +static void bcm63xx_ep0_nuke_reply(struct bcm63xx_udc *udc, int is_tx) +{ + struct usb_request *req = udc->ep0_reply; + + udc->ep0_reply = NULL; + usb_gadget_unmap_request(&udc->gadget, req, is_tx); + if (udc->ep0_request == req) { + udc->ep0_req_completed = 0; + udc->ep0_request = NULL; + } + bcm63xx_ep0_complete(udc, req, -ESHUTDOWN); +} + +/** + * bcm63xx_ep0_read_complete - Close out the pending ep0 request; return + * transfer len. + * @udc: Reference to the device controller. + */ +static int bcm63xx_ep0_read_complete(struct bcm63xx_udc *udc) +{ + struct usb_request *req = udc->ep0_request; + + udc->ep0_req_completed = 0; + udc->ep0_request = NULL; + + return req->actual; +} + +/** + * bcm63xx_ep0_internal_request - Helper function to submit an ep0 request. + * @udc: Reference to the device controller. + * @ch_idx: IUDMA channel number. + * @length: Number of bytes to TX/RX. + * + * Used for simple transfers performed by the ep0 worker. This will always + * use ep0_ctrl_req / ep0_ctrl_buf. + */ +static void bcm63xx_ep0_internal_request(struct bcm63xx_udc *udc, int ch_idx, + int length) +{ + struct usb_request *req = &udc->ep0_ctrl_req.req; + + req->buf = udc->ep0_ctrl_buf; + req->length = length; + req->complete = NULL; + + bcm63xx_ep0_map_write(udc, ch_idx, req); +} + +/** + * bcm63xx_ep0_do_setup - Parse new SETUP packet and decide how to handle it. + * @udc: Reference to the device controller. + * + * EP0_IDLE probably shouldn't ever happen. EP0_REQUEUE means we're ready + * for the next packet. Anything else means the transaction requires multiple + * stages of handling. + */ +static enum bcm63xx_ep0_state bcm63xx_ep0_do_setup(struct bcm63xx_udc *udc) +{ + int rc; + struct usb_ctrlrequest *ctrl = (void *)udc->ep0_ctrl_buf; + + rc = bcm63xx_ep0_read_complete(udc); + + if (rc < 0) { + dev_err(udc->dev, "missing SETUP packet\n"); + return EP0_IDLE; + } + + /* + * Handle 0-byte IN STATUS acknowledgement. The hardware doesn't + * ALWAYS deliver these 100% of the time, so if we happen to see one, + * just throw it away. + */ + if (rc == 0) + return EP0_REQUEUE; + + /* Drop malformed SETUP packets */ + if (rc != sizeof(*ctrl)) { + dev_warn_ratelimited(udc->dev, + "malformed SETUP packet (%d bytes)\n", rc); + return EP0_REQUEUE; + } + + /* Process new SETUP packet arriving on ep0 */ + rc = bcm63xx_ep0_setup_callback(udc, ctrl); + if (rc < 0) { + bcm63xx_set_stall(udc, &udc->bep[0], true); + return EP0_REQUEUE; + } + + if (!ctrl->wLength) + return EP0_REQUEUE; + else if (ctrl->bRequestType & USB_DIR_IN) + return EP0_IN_DATA_PHASE_SETUP; + else + return EP0_OUT_DATA_PHASE_SETUP; +} + +/** + * bcm63xx_ep0_do_idle - Check for outstanding requests if ep0 is idle. + * @udc: Reference to the device controller. + * + * In state EP0_IDLE, the RX descriptor is either pending, or has been + * filled with a SETUP packet from the host. This function handles new + * SETUP packets, control IRQ events (which can generate fake SETUP packets), + * and reset/shutdown events. + * + * Returns 0 if work was done; -EAGAIN if nothing to do. + */ +static int bcm63xx_ep0_do_idle(struct bcm63xx_udc *udc) +{ + if (udc->ep0_req_reset) { + udc->ep0_req_reset = 0; + } else if (udc->ep0_req_set_cfg) { + udc->ep0_req_set_cfg = 0; + if (bcm63xx_ep0_spoof_set_cfg(udc) >= 0) + udc->ep0state = EP0_IN_FAKE_STATUS_PHASE; + } else if (udc->ep0_req_set_iface) { + udc->ep0_req_set_iface = 0; + if (bcm63xx_ep0_spoof_set_iface(udc) >= 0) + udc->ep0state = EP0_IN_FAKE_STATUS_PHASE; + } else if (udc->ep0_req_completed) { + udc->ep0state = bcm63xx_ep0_do_setup(udc); + return udc->ep0state == EP0_IDLE ? -EAGAIN : 0; + } else if (udc->ep0_req_shutdown) { + udc->ep0_req_shutdown = 0; + udc->ep0_req_completed = 0; + udc->ep0_request = NULL; + iudma_reset_channel(udc, &udc->iudma[IUDMA_EP0_RXCHAN]); + usb_gadget_unmap_request(&udc->gadget, + &udc->ep0_ctrl_req.req, 0); + + /* bcm63xx_udc_pullup() is waiting for this */ + mb(); + udc->ep0state = EP0_SHUTDOWN; + } else if (udc->ep0_reply) { + /* + * This could happen if a USB RESET shows up during an ep0 + * transaction (especially if a laggy driver like gadgetfs + * is in use). + */ + dev_warn(udc->dev, "nuking unexpected reply\n"); + bcm63xx_ep0_nuke_reply(udc, 0); + } else { + return -EAGAIN; + } + + return 0; +} + +/** + * bcm63xx_ep0_one_round - Handle the current ep0 state. + * @udc: Reference to the device controller. + * + * Returns 0 if work was done; -EAGAIN if nothing to do. + */ +static int bcm63xx_ep0_one_round(struct bcm63xx_udc *udc) +{ + enum bcm63xx_ep0_state ep0state = udc->ep0state; + bool shutdown = udc->ep0_req_reset || udc->ep0_req_shutdown; + + switch (udc->ep0state) { + case EP0_REQUEUE: + /* set up descriptor to receive SETUP packet */ + bcm63xx_ep0_internal_request(udc, IUDMA_EP0_RXCHAN, + BCM63XX_MAX_CTRL_PKT); + ep0state = EP0_IDLE; + break; + case EP0_IDLE: + return bcm63xx_ep0_do_idle(udc); + case EP0_IN_DATA_PHASE_SETUP: + /* + * Normal case: TX request is in ep0_reply (queued by the + * callback), or will be queued shortly. When it's here, + * send it to the HW and go to EP0_IN_DATA_PHASE_COMPLETE. + * + * Shutdown case: Stop waiting for the reply. Just + * REQUEUE->IDLE. The gadget driver is NOT expected to + * queue anything else now. + */ + if (udc->ep0_reply) { + bcm63xx_ep0_map_write(udc, IUDMA_EP0_TXCHAN, + udc->ep0_reply); + ep0state = EP0_IN_DATA_PHASE_COMPLETE; + } else if (shutdown) { + ep0state = EP0_REQUEUE; + } + break; + case EP0_IN_DATA_PHASE_COMPLETE: { + /* + * Normal case: TX packet (ep0_reply) is in flight; wait for + * it to finish, then go back to REQUEUE->IDLE. + * + * Shutdown case: Reset the TX channel, send -ESHUTDOWN + * completion to the gadget driver, then REQUEUE->IDLE. + */ + if (udc->ep0_req_completed) { + udc->ep0_reply = NULL; + bcm63xx_ep0_read_complete(udc); + /* + * the "ack" sometimes gets eaten (see + * bcm63xx_ep0_do_idle) + */ + ep0state = EP0_REQUEUE; + } else if (shutdown) { + iudma_reset_channel(udc, &udc->iudma[IUDMA_EP0_TXCHAN]); + bcm63xx_ep0_nuke_reply(udc, 1); + ep0state = EP0_REQUEUE; + } + break; + } + case EP0_OUT_DATA_PHASE_SETUP: + /* Similar behavior to EP0_IN_DATA_PHASE_SETUP */ + if (udc->ep0_reply) { + bcm63xx_ep0_map_write(udc, IUDMA_EP0_RXCHAN, + udc->ep0_reply); + ep0state = EP0_OUT_DATA_PHASE_COMPLETE; + } else if (shutdown) { + ep0state = EP0_REQUEUE; + } + break; + case EP0_OUT_DATA_PHASE_COMPLETE: { + /* Similar behavior to EP0_IN_DATA_PHASE_COMPLETE */ + if (udc->ep0_req_completed) { + udc->ep0_reply = NULL; + bcm63xx_ep0_read_complete(udc); + + /* send 0-byte ack to host */ + bcm63xx_ep0_internal_request(udc, IUDMA_EP0_TXCHAN, 0); + ep0state = EP0_OUT_STATUS_PHASE; + } else if (shutdown) { + iudma_reset_channel(udc, &udc->iudma[IUDMA_EP0_RXCHAN]); + bcm63xx_ep0_nuke_reply(udc, 0); + ep0state = EP0_REQUEUE; + } + break; + } + case EP0_OUT_STATUS_PHASE: + /* + * Normal case: 0-byte OUT ack packet is in flight; wait + * for it to finish, then go back to REQUEUE->IDLE. + * + * Shutdown case: just cancel the transmission. Don't bother + * calling the completion, because it originated from this + * function anyway. Then go back to REQUEUE->IDLE. + */ + if (udc->ep0_req_completed) { + bcm63xx_ep0_read_complete(udc); + ep0state = EP0_REQUEUE; + } else if (shutdown) { + iudma_reset_channel(udc, &udc->iudma[IUDMA_EP0_TXCHAN]); + udc->ep0_request = NULL; + ep0state = EP0_REQUEUE; + } + break; + case EP0_IN_FAKE_STATUS_PHASE: { + /* + * Normal case: we spoofed a SETUP packet and are now + * waiting for the gadget driver to send a 0-byte reply. + * This doesn't actually get sent to the HW because the + * HW has already sent its own reply. Once we get the + * response, return to IDLE. + * + * Shutdown case: return to IDLE immediately. + * + * Note that the ep0 RX descriptor has remained queued + * (and possibly unfilled) during this entire transaction. + * The HW datapath (IUDMA) never even sees SET_CONFIGURATION + * or SET_INTERFACE transactions. + */ + struct usb_request *r = udc->ep0_reply; + + if (!r) { + if (shutdown) + ep0state = EP0_IDLE; + break; + } + + bcm63xx_ep0_complete(udc, r, 0); + udc->ep0_reply = NULL; + ep0state = EP0_IDLE; + break; + } + case EP0_SHUTDOWN: + break; + } + + if (udc->ep0state == ep0state) + return -EAGAIN; + + udc->ep0state = ep0state; + return 0; +} + +/** + * bcm63xx_ep0_process - ep0 worker thread / state machine. + * @w: Workqueue struct. + * + * bcm63xx_ep0_process is triggered any time an event occurs on ep0. It + * is used to synchronize ep0 events and ensure that both HW and SW events + * occur in a well-defined order. When the ep0 IUDMA queues are idle, it may + * synthesize SET_CONFIGURATION / SET_INTERFACE requests that were consumed + * by the USBD hardware. + * + * The worker function will continue iterating around the state machine + * until there is nothing left to do. Usually "nothing left to do" means + * that we're waiting for a new event from the hardware. + */ +static void bcm63xx_ep0_process(struct work_struct *w) +{ + struct bcm63xx_udc *udc = container_of(w, struct bcm63xx_udc, ep0_wq); + spin_lock_irq(&udc->lock); + while (bcm63xx_ep0_one_round(udc) == 0) + ; + spin_unlock_irq(&udc->lock); +} + +/*********************************************************************** + * Standard UDC gadget operations + ***********************************************************************/ + +/** + * bcm63xx_udc_get_frame - Read current SOF frame number from the HW. + * @gadget: USB slave device. + */ +static int bcm63xx_udc_get_frame(struct usb_gadget *gadget) +{ + struct bcm63xx_udc *udc = gadget_to_udc(gadget); + + return (usbd_readl(udc, USBD_STATUS_REG) & + USBD_STATUS_SOF_MASK) >> USBD_STATUS_SOF_SHIFT; +} + +/** + * bcm63xx_udc_pullup - Enable/disable pullup on D+ line. + * @gadget: USB slave device. + * @is_on: 0 to disable pullup, 1 to enable. + * + * See notes in bcm63xx_select_pullup(). + */ +static int bcm63xx_udc_pullup(struct usb_gadget *gadget, int is_on) +{ + struct bcm63xx_udc *udc = gadget_to_udc(gadget); + unsigned long flags; + int i, rc = -EINVAL; + + spin_lock_irqsave(&udc->lock, flags); + if (is_on && udc->ep0state == EP0_SHUTDOWN) { + udc->gadget.speed = USB_SPEED_UNKNOWN; + udc->ep0state = EP0_REQUEUE; + bcm63xx_fifo_setup(udc); + bcm63xx_fifo_reset(udc); + bcm63xx_ep_setup(udc); + + bitmap_zero(&udc->wedgemap, BCM63XX_NUM_EP); + for (i = 0; i < BCM63XX_NUM_EP; i++) + bcm63xx_set_stall(udc, &udc->bep[i], false); + + bcm63xx_set_ctrl_irqs(udc, true); + bcm63xx_select_pullup(gadget_to_udc(gadget), true); + rc = 0; + } else if (!is_on && udc->ep0state != EP0_SHUTDOWN) { + bcm63xx_select_pullup(gadget_to_udc(gadget), false); + + udc->ep0_req_shutdown = 1; + spin_unlock_irqrestore(&udc->lock, flags); + + while (1) { + schedule_work(&udc->ep0_wq); + if (udc->ep0state == EP0_SHUTDOWN) + break; + msleep(50); + } + bcm63xx_set_ctrl_irqs(udc, false); + cancel_work_sync(&udc->ep0_wq); + return 0; + } + + spin_unlock_irqrestore(&udc->lock, flags); + return rc; +} + +/** + * bcm63xx_udc_start - Start the controller. + * @gadget: USB slave device. + * @driver: Driver for USB slave devices. + */ +static int bcm63xx_udc_start(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) +{ + struct bcm63xx_udc *udc = gadget_to_udc(gadget); + unsigned long flags; + + if (!driver || driver->max_speed < USB_SPEED_HIGH || + !driver->setup) + return -EINVAL; + if (!udc) + return -ENODEV; + if (udc->driver) + return -EBUSY; + + spin_lock_irqsave(&udc->lock, flags); + + set_clocks(udc, true); + bcm63xx_fifo_setup(udc); + bcm63xx_ep_init(udc); + bcm63xx_ep_setup(udc); + bcm63xx_fifo_reset(udc); + bcm63xx_select_phy_mode(udc, true); + + udc->driver = driver; + driver->driver.bus = NULL; + udc->gadget.dev.driver = &driver->driver; + udc->gadget.dev.of_node = udc->dev->of_node; + + spin_unlock_irqrestore(&udc->lock, flags); + + return 0; +} + +/** + * bcm63xx_udc_stop - Shut down the controller. + * @gadget: USB slave device. + * @driver: Driver for USB slave devices. + */ +static int bcm63xx_udc_stop(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) +{ + struct bcm63xx_udc *udc = gadget_to_udc(gadget); + unsigned long flags; + + spin_lock_irqsave(&udc->lock, flags); + + udc->driver = NULL; + udc->gadget.dev.driver = NULL; + + /* + * If we switch the PHY too abruptly after dropping D+, the host + * will often complain: + * + * hub 1-0:1.0: port 1 disabled by hub (EMI?), re-enabling... + */ + msleep(100); + + bcm63xx_select_phy_mode(udc, false); + set_clocks(udc, false); + + spin_unlock_irqrestore(&udc->lock, flags); + + return 0; +} + +static const struct usb_gadget_ops bcm63xx_udc_ops = { + .get_frame = bcm63xx_udc_get_frame, + .pullup = bcm63xx_udc_pullup, + .udc_start = bcm63xx_udc_start, + .udc_stop = bcm63xx_udc_stop, +}; + +/*********************************************************************** + * IRQ handling + ***********************************************************************/ + +/** + * bcm63xx_update_cfg_iface - Read current configuration/interface settings. + * @udc: Reference to the device controller. + * + * This controller intercepts SET_CONFIGURATION and SET_INTERFACE messages. + * The driver never sees the raw control packets coming in on the ep0 + * IUDMA channel, but at least we get an interrupt event to tell us that + * new values are waiting in the USBD_STATUS register. + */ +static void bcm63xx_update_cfg_iface(struct bcm63xx_udc *udc) +{ + u32 reg = usbd_readl(udc, USBD_STATUS_REG); + + udc->cfg = (reg & USBD_STATUS_CFG_MASK) >> USBD_STATUS_CFG_SHIFT; + udc->iface = (reg & USBD_STATUS_INTF_MASK) >> USBD_STATUS_INTF_SHIFT; + udc->alt_iface = (reg & USBD_STATUS_ALTINTF_MASK) >> + USBD_STATUS_ALTINTF_SHIFT; + bcm63xx_ep_setup(udc); +} + +/** + * bcm63xx_update_link_speed - Check to see if the link speed has changed. + * @udc: Reference to the device controller. + * + * The link speed update coincides with a SETUP IRQ. Returns 1 if the + * speed has changed, so that the caller can update the endpoint settings. + */ +static int bcm63xx_update_link_speed(struct bcm63xx_udc *udc) +{ + u32 reg = usbd_readl(udc, USBD_STATUS_REG); + enum usb_device_speed oldspeed = udc->gadget.speed; + + switch ((reg & USBD_STATUS_SPD_MASK) >> USBD_STATUS_SPD_SHIFT) { + case BCM63XX_SPD_HIGH: + udc->gadget.speed = USB_SPEED_HIGH; + break; + case BCM63XX_SPD_FULL: + udc->gadget.speed = USB_SPEED_FULL; + break; + default: + /* this should never happen */ + udc->gadget.speed = USB_SPEED_UNKNOWN; + dev_err(udc->dev, + "received SETUP packet with invalid link speed\n"); + return 0; + } + + if (udc->gadget.speed != oldspeed) { + dev_info(udc->dev, "link up, %s-speed mode\n", + udc->gadget.speed == USB_SPEED_HIGH ? "high" : "full"); + return 1; + } else { + return 0; + } +} + +/** + * bcm63xx_update_wedge - Iterate through wedged endpoints. + * @udc: Reference to the device controller. + * @new_status: true to "refresh" wedge status; false to clear it. + * + * On a SETUP interrupt, we need to manually "refresh" the wedge status + * because the controller hardware is designed to automatically clear + * stalls in response to a CLEAR_FEATURE request from the host. + * + * On a RESET interrupt, we do want to restore all wedged endpoints. + */ +static void bcm63xx_update_wedge(struct bcm63xx_udc *udc, bool new_status) +{ + int i; + + for_each_set_bit(i, &udc->wedgemap, BCM63XX_NUM_EP) { + bcm63xx_set_stall(udc, &udc->bep[i], new_status); + if (!new_status) + clear_bit(i, &udc->wedgemap); + } +} + +/** + * bcm63xx_udc_ctrl_isr - ISR for control path events (USBD). + * @irq: IRQ number (unused). + * @dev_id: Reference to the device controller. + * + * This is where we handle link (VBUS) down, USB reset, speed changes, + * SET_CONFIGURATION, and SET_INTERFACE events. + */ +static irqreturn_t bcm63xx_udc_ctrl_isr(int irq, void *dev_id) +{ + struct bcm63xx_udc *udc = dev_id; + u32 stat; + bool disconnected = false; + + stat = usbd_readl(udc, USBD_EVENT_IRQ_STATUS_REG) & + usbd_readl(udc, USBD_EVENT_IRQ_MASK_REG); + + usbd_writel(udc, stat, USBD_EVENT_IRQ_STATUS_REG); + + spin_lock(&udc->lock); + if (stat & BIT(USBD_EVENT_IRQ_USB_LINK)) { + /* VBUS toggled */ + + if (!(usbd_readl(udc, USBD_EVENTS_REG) & + USBD_EVENTS_USB_LINK_MASK) && + udc->gadget.speed != USB_SPEED_UNKNOWN) + dev_info(udc->dev, "link down\n"); + + udc->gadget.speed = USB_SPEED_UNKNOWN; + disconnected = true; + } + if (stat & BIT(USBD_EVENT_IRQ_USB_RESET)) { + bcm63xx_fifo_setup(udc); + bcm63xx_fifo_reset(udc); + bcm63xx_ep_setup(udc); + + bcm63xx_update_wedge(udc, false); + + udc->ep0_req_reset = 1; + schedule_work(&udc->ep0_wq); + disconnected = true; + } + if (stat & BIT(USBD_EVENT_IRQ_SETUP)) { + if (bcm63xx_update_link_speed(udc)) { + bcm63xx_fifo_setup(udc); + bcm63xx_ep_setup(udc); + } + bcm63xx_update_wedge(udc, true); + } + if (stat & BIT(USBD_EVENT_IRQ_SETCFG)) { + bcm63xx_update_cfg_iface(udc); + udc->ep0_req_set_cfg = 1; + schedule_work(&udc->ep0_wq); + } + if (stat & BIT(USBD_EVENT_IRQ_SETINTF)) { + bcm63xx_update_cfg_iface(udc); + udc->ep0_req_set_iface = 1; + schedule_work(&udc->ep0_wq); + } + spin_unlock(&udc->lock); + + if (disconnected && udc->driver) + udc->driver->disconnect(&udc->gadget); + + return IRQ_HANDLED; +} + +/** + * bcm63xx_udc_data_isr - ISR for data path events (IUDMA). + * @irq: IRQ number (unused). + * @dev_id: Reference to the IUDMA channel that generated the interrupt. + * + * For the two ep0 channels, we have special handling that triggers the + * ep0 worker thread. For normal bulk/intr channels, either queue up + * the next buffer descriptor for the transaction (incomplete transaction), + * or invoke the completion callback (complete transactions). + */ +static irqreturn_t bcm63xx_udc_data_isr(int irq, void *dev_id) +{ + struct iudma_ch *iudma = dev_id; + struct bcm63xx_udc *udc = iudma->udc; + struct bcm63xx_ep *bep; + struct usb_request *req = NULL; + struct bcm63xx_req *breq = NULL; + int rc; + bool is_done = false; + + spin_lock(&udc->lock); + + usb_dmac_writel(udc, ENETDMAC_IR_BUFDONE_MASK, + ENETDMAC_IR_REG(iudma->ch_idx)); + bep = iudma->bep; + rc = iudma_read(udc, iudma); + + /* special handling for EP0 RX (0) and TX (1) */ + if (iudma->ch_idx == IUDMA_EP0_RXCHAN || + iudma->ch_idx == IUDMA_EP0_TXCHAN) { + req = udc->ep0_request; + breq = our_req(req); + + /* a single request could require multiple submissions */ + if (rc >= 0) { + req->actual += rc; + + if (req->actual >= req->length || breq->bd_bytes > rc) { + udc->ep0_req_completed = 1; + is_done = true; + schedule_work(&udc->ep0_wq); + + /* "actual" on a ZLP is 1 byte */ + req->actual = min(req->actual, req->length); + } else { + /* queue up the next BD (same request) */ + iudma_write(udc, iudma, breq); + } + } + } else if (!list_empty(&bep->queue)) { + breq = list_first_entry(&bep->queue, struct bcm63xx_req, queue); + req = &breq->req; + + if (rc >= 0) { + req->actual += rc; + + if (req->actual >= req->length || breq->bd_bytes > rc) { + is_done = true; + list_del(&breq->queue); + + req->actual = min(req->actual, req->length); + + if (!list_empty(&bep->queue)) { + struct bcm63xx_req *next; + + next = list_first_entry(&bep->queue, + struct bcm63xx_req, queue); + iudma_write(udc, iudma, next); + } + } else { + iudma_write(udc, iudma, breq); + } + } + } + spin_unlock(&udc->lock); + + if (is_done) { + usb_gadget_unmap_request(&udc->gadget, req, iudma->is_tx); + if (req->complete) + req->complete(&bep->ep, req); + } + + return IRQ_HANDLED; +} + +/*********************************************************************** + * Debug filesystem + ***********************************************************************/ + +/* + * bcm63xx_usbd_dbg_show - Show USBD controller state. + * @s: seq_file to which the information will be written. + * @p: Unused. + * + * This file nominally shows up as /sys/kernel/debug/bcm63xx_udc/usbd + */ +static int bcm63xx_usbd_dbg_show(struct seq_file *s, void *p) +{ + struct bcm63xx_udc *udc = s->private; + + if (!udc->driver) + return -ENODEV; + + seq_printf(s, "ep0 state: %s\n", + bcm63xx_ep0_state_names[udc->ep0state]); + seq_printf(s, " pending requests: %s%s%s%s%s%s%s\n", + udc->ep0_req_reset ? "reset " : "", + udc->ep0_req_set_cfg ? "set_cfg " : "", + udc->ep0_req_set_iface ? "set_iface " : "", + udc->ep0_req_shutdown ? "shutdown " : "", + udc->ep0_request ? "pending " : "", + udc->ep0_req_completed ? "completed " : "", + udc->ep0_reply ? "reply " : ""); + seq_printf(s, "cfg: %d; iface: %d; alt_iface: %d\n", + udc->cfg, udc->iface, udc->alt_iface); + seq_printf(s, "regs:\n"); + seq_printf(s, " control: %08x; straps: %08x; status: %08x\n", + usbd_readl(udc, USBD_CONTROL_REG), + usbd_readl(udc, USBD_STRAPS_REG), + usbd_readl(udc, USBD_STATUS_REG)); + seq_printf(s, " events: %08x; stall: %08x\n", + usbd_readl(udc, USBD_EVENTS_REG), + usbd_readl(udc, USBD_STALL_REG)); + + return 0; +} + +/* + * bcm63xx_iudma_dbg_show - Show IUDMA status and descriptors. + * @s: seq_file to which the information will be written. + * @p: Unused. + * + * This file nominally shows up as /sys/kernel/debug/bcm63xx_udc/iudma + */ +static int bcm63xx_iudma_dbg_show(struct seq_file *s, void *p) +{ + struct bcm63xx_udc *udc = s->private; + int ch_idx, i; + u32 sram2, sram3; + + if (!udc->driver) + return -ENODEV; + + for (ch_idx = 0; ch_idx < BCM63XX_NUM_IUDMA; ch_idx++) { + struct iudma_ch *iudma = &udc->iudma[ch_idx]; + struct list_head *pos; + + seq_printf(s, "IUDMA channel %d -- ", ch_idx); + switch (iudma_defaults[ch_idx].ep_type) { + case BCMEP_CTRL: + seq_printf(s, "control"); + break; + case BCMEP_BULK: + seq_printf(s, "bulk"); + break; + case BCMEP_INTR: + seq_printf(s, "interrupt"); + break; + } + seq_printf(s, ch_idx & 0x01 ? " tx" : " rx"); + seq_printf(s, " [ep%d]:\n", + max_t(int, iudma_defaults[ch_idx].ep_num, 0)); + seq_printf(s, " cfg: %08x; irqstat: %08x; irqmask: %08x; maxburst: %08x\n", + usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG(ch_idx)), + usb_dmac_readl(udc, ENETDMAC_IR_REG(ch_idx)), + usb_dmac_readl(udc, ENETDMAC_IRMASK_REG(ch_idx)), + usb_dmac_readl(udc, ENETDMAC_MAXBURST_REG(ch_idx))); + + sram2 = usb_dmas_readl(udc, ENETDMAS_SRAM2_REG(ch_idx)); + sram3 = usb_dmas_readl(udc, ENETDMAS_SRAM3_REG(ch_idx)); + seq_printf(s, " base: %08x; index: %04x_%04x; desc: %04x_%04x %08x\n", + usb_dmas_readl(udc, ENETDMAS_RSTART_REG(ch_idx)), + sram2 >> 16, sram2 & 0xffff, + sram3 >> 16, sram3 & 0xffff, + usb_dmas_readl(udc, ENETDMAS_SRAM4_REG(ch_idx))); + seq_printf(s, " desc: %d/%d used", iudma->n_bds_used, + iudma->n_bds); + + if (iudma->bep) { + i = 0; + list_for_each(pos, &iudma->bep->queue) + i++; + seq_printf(s, "; %d queued\n", i); + } else { + seq_printf(s, "\n"); + } + + for (i = 0; i < iudma->n_bds; i++) { + struct bcm_enet_desc *d = &iudma->bd_ring[i]; + + seq_printf(s, " %03x (%02x): len_stat: %04x_%04x; pa %08x", + i * sizeof(*d), i, + d->len_stat >> 16, d->len_stat & 0xffff, + d->address); + if (d == iudma->read_bd) + seq_printf(s, " <<RD"); + if (d == iudma->write_bd) + seq_printf(s, " <<WR"); + seq_printf(s, "\n"); + } + + seq_printf(s, "\n"); + } + + return 0; +} + +static int bcm63xx_usbd_dbg_open(struct inode *inode, struct file *file) +{ + return single_open(file, bcm63xx_usbd_dbg_show, inode->i_private); +} + +static int bcm63xx_iudma_dbg_open(struct inode *inode, struct file *file) +{ + return single_open(file, bcm63xx_iudma_dbg_show, inode->i_private); +} + +static const struct file_operations usbd_dbg_fops = { + .owner = THIS_MODULE, + .open = bcm63xx_usbd_dbg_open, + .llseek = seq_lseek, + .read = seq_read, + .release = single_release, +}; + +static const struct file_operations iudma_dbg_fops = { + .owner = THIS_MODULE, + .open = bcm63xx_iudma_dbg_open, + .llseek = seq_lseek, + .read = seq_read, + .release = single_release, +}; + + +/** + * bcm63xx_udc_init_debugfs - Create debugfs entries. + * @udc: Reference to the device controller. + */ +static void bcm63xx_udc_init_debugfs(struct bcm63xx_udc *udc) +{ + struct dentry *root, *usbd, *iudma; + + if (!IS_ENABLED(CONFIG_USB_GADGET_DEBUG_FS)) + return; + + root = debugfs_create_dir(udc->gadget.name, NULL); + if (IS_ERR(root) || !root) + goto err_root; + + usbd = debugfs_create_file("usbd", 0400, root, udc, + &usbd_dbg_fops); + if (!usbd) + goto err_usbd; + iudma = debugfs_create_file("iudma", 0400, root, udc, + &iudma_dbg_fops); + if (!iudma) + goto err_iudma; + + udc->debugfs_root = root; + udc->debugfs_usbd = usbd; + udc->debugfs_iudma = iudma; + return; +err_iudma: + debugfs_remove(usbd); +err_usbd: + debugfs_remove(root); +err_root: + dev_err(udc->dev, "debugfs is not available\n"); +} + +/** + * bcm63xx_udc_cleanup_debugfs - Remove debugfs entries. + * @udc: Reference to the device controller. + * + * debugfs_remove() is safe to call with a NULL argument. + */ +static void bcm63xx_udc_cleanup_debugfs(struct bcm63xx_udc *udc) +{ + debugfs_remove(udc->debugfs_iudma); + debugfs_remove(udc->debugfs_usbd); + debugfs_remove(udc->debugfs_root); + udc->debugfs_iudma = NULL; + udc->debugfs_usbd = NULL; + udc->debugfs_root = NULL; +} + +/*********************************************************************** + * Driver init/exit + ***********************************************************************/ + +/** + * bcm63xx_udc_gadget_release - Called from device_release(). + * @dev: Unused. + * + * We get a warning if this function doesn't exist, but it's empty because + * we don't have to free any of the memory allocated with the devm_* APIs. + */ +static void bcm63xx_udc_gadget_release(struct device *dev) +{ +} + +/** + * bcm63xx_udc_probe - Initialize a new instance of the UDC. + * @pdev: Platform device struct from the bcm63xx BSP code. + * + * Note that platform data is required, because pd.port_no varies from chip + * to chip and is used to switch the correct USB port to device mode. + */ +static int __devinit bcm63xx_udc_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct bcm63xx_usbd_platform_data *pd = dev->platform_data; + struct bcm63xx_udc *udc; + struct resource *res; + int rc = -ENOMEM, i, irq; + + udc = devm_kzalloc(dev, sizeof(*udc), GFP_KERNEL); + if (!udc) { + dev_err(dev, "cannot allocate memory\n"); + return -ENOMEM; + } + + platform_set_drvdata(pdev, udc); + udc->dev = dev; + udc->pd = pd; + + if (!pd) { + dev_err(dev, "missing platform data\n"); + return -EINVAL; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(dev, "error finding USBD resource\n"); + return -ENXIO; + } + udc->usbd_regs = devm_request_and_ioremap(dev, res); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (!res) { + dev_err(dev, "error finding IUDMA resource\n"); + return -ENXIO; + } + udc->iudma_regs = devm_request_and_ioremap(dev, res); + + if (!udc->usbd_regs || !udc->iudma_regs) { + dev_err(dev, "error requesting resources\n"); + return -ENXIO; + } + + spin_lock_init(&udc->lock); + INIT_WORK(&udc->ep0_wq, bcm63xx_ep0_process); + dev_set_name(&udc->gadget.dev, "gadget"); + + udc->gadget.ops = &bcm63xx_udc_ops; + udc->gadget.name = dev_name(dev); + udc->gadget.dev.parent = dev; + udc->gadget.dev.release = bcm63xx_udc_gadget_release; + udc->gadget.dev.dma_mask = dev->dma_mask; + + if (!pd->use_fullspeed && !use_fullspeed) + udc->gadget.max_speed = USB_SPEED_HIGH; + else + udc->gadget.max_speed = USB_SPEED_FULL; + + /* request clocks, allocate buffers, and clear any pending IRQs */ + rc = bcm63xx_init_udc_hw(udc); + if (rc) + return rc; + + rc = -ENXIO; + + /* IRQ resource #0: control interrupt (VBUS, speed, etc.) */ + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(dev, "missing IRQ resource #0\n"); + goto out_uninit; + } + if (devm_request_irq(dev, irq, &bcm63xx_udc_ctrl_isr, 0, + dev_name(dev), udc) < 0) { + dev_err(dev, "error requesting IRQ #%d\n", irq); + goto out_uninit; + } + + /* IRQ resources #1-6: data interrupts for IUDMA channels 0-5 */ + for (i = 0; i < BCM63XX_NUM_IUDMA; i++) { + irq = platform_get_irq(pdev, i + 1); + if (irq < 0) { + dev_err(dev, "missing IRQ resource #%d\n", i + 1); + goto out_uninit; + } + if (devm_request_irq(dev, irq, &bcm63xx_udc_data_isr, 0, + dev_name(dev), &udc->iudma[i]) < 0) { + dev_err(dev, "error requesting IRQ #%d\n", irq); + goto out_uninit; + } + } + + rc = device_register(&udc->gadget.dev); + if (rc) + goto out_uninit; + + bcm63xx_udc_init_debugfs(udc); + rc = usb_add_gadget_udc(dev, &udc->gadget); + if (!rc) + return 0; + + bcm63xx_udc_cleanup_debugfs(udc); + device_unregister(&udc->gadget.dev); +out_uninit: + bcm63xx_uninit_udc_hw(udc); + return rc; +} + +/** + * bcm63xx_udc_remove - Remove the device from the system. + * @pdev: Platform device struct from the bcm63xx BSP code. + */ +static int __devexit bcm63xx_udc_remove(struct platform_device *pdev) +{ + struct bcm63xx_udc *udc = platform_get_drvdata(pdev); + + bcm63xx_udc_cleanup_debugfs(udc); + usb_del_gadget_udc(&udc->gadget); + device_unregister(&udc->gadget.dev); + BUG_ON(udc->driver); + + platform_set_drvdata(pdev, NULL); + bcm63xx_uninit_udc_hw(udc); + + return 0; +} + +static struct platform_driver bcm63xx_udc_driver = { + .probe = bcm63xx_udc_probe, + .remove = __devexit_p(bcm63xx_udc_remove), + .driver = { + .name = DRV_MODULE_NAME, + .owner = THIS_MODULE, + }, +}; +module_platform_driver(bcm63xx_udc_driver); + +MODULE_DESCRIPTION("BCM63xx USB Peripheral Controller"); +MODULE_AUTHOR("Kevin Cernekee <cernekee@gmail.com>"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRV_MODULE_NAME); diff --git a/drivers/usb/gadget/cdc2.c b/drivers/usb/gadget/cdc2.c index 725550f06fab..1e4bb77f00bb 100644 --- a/drivers/usb/gadget/cdc2.c +++ b/drivers/usb/gadget/cdc2.c @@ -11,7 +11,6 @@ */ #include <linux/kernel.h> -#include <linux/utsname.h> #include <linux/module.h> #include "u_ether.h" @@ -34,6 +33,7 @@ #define CDC_PRODUCT_NUM 0xa4aa /* CDC Composite: ECM + ACM */ /*-------------------------------------------------------------------------*/ +USB_GADGET_COMPOSITE_OPTIONS(); /* * Kbuild is not very cooperative with respect to linking separately @@ -43,10 +43,6 @@ * a "gcc --combine ... part1.c part2.c part3.c ... " build would. */ -#include "composite.c" -#include "usbstring.c" -#include "config.c" -#include "epautoconf.c" #include "u_serial.c" #include "f_acm.c" #include "f_ecm.c" @@ -92,15 +88,10 @@ static const struct usb_descriptor_header *otg_desc[] = { /* string IDs are assigned dynamically */ - -#define STRING_MANUFACTURER_IDX 0 -#define STRING_PRODUCT_IDX 1 - -static char manufacturer[50]; - static struct usb_string strings_dev[] = { - [STRING_MANUFACTURER_IDX].s = manufacturer, - [STRING_PRODUCT_IDX].s = DRIVER_DESC, + [USB_GADGET_MANUFACTURER_IDX].s = "", + [USB_GADGET_PRODUCT_IDX].s = DRIVER_DESC, + [USB_GADGET_SERIAL_IDX].s = "", { } /* end of list */ }; @@ -152,7 +143,6 @@ static struct usb_configuration cdc_config_driver = { static int __init cdc_bind(struct usb_composite_dev *cdev) { - int gcnum; struct usb_gadget *gadget = cdev->gadget; int status; @@ -172,47 +162,22 @@ static int __init cdc_bind(struct usb_composite_dev *cdev) if (status < 0) goto fail0; - gcnum = usb_gadget_controller_number(gadget); - if (gcnum >= 0) - device_desc.bcdDevice = cpu_to_le16(0x0300 | gcnum); - else { - /* We assume that can_support_ecm() tells the truth; - * but if the controller isn't recognized at all then - * that assumption is a bit more likely to be wrong. - */ - WARNING(cdev, "controller '%s' not recognized; trying %s\n", - gadget->name, - cdc_config_driver.label); - device_desc.bcdDevice = - cpu_to_le16(0x0300 | 0x0099); - } - - /* Allocate string descriptor numbers ... note that string * contents can be overridden by the composite_dev glue. */ - /* device descriptor strings: manufacturer, product */ - snprintf(manufacturer, sizeof manufacturer, "%s %s with %s", - init_utsname()->sysname, init_utsname()->release, - gadget->name); - status = usb_string_id(cdev); - if (status < 0) - goto fail1; - strings_dev[STRING_MANUFACTURER_IDX].id = status; - device_desc.iManufacturer = status; - - status = usb_string_id(cdev); + status = usb_string_ids_tab(cdev, strings_dev); if (status < 0) goto fail1; - strings_dev[STRING_PRODUCT_IDX].id = status; - device_desc.iProduct = status; + device_desc.iManufacturer = strings_dev[USB_GADGET_MANUFACTURER_IDX].id; + device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id; /* register our configuration */ status = usb_add_config(cdev, &cdc_config_driver, cdc_do_config); if (status < 0) goto fail1; + usb_composite_overwrite_options(cdev, &coverwrite); dev_info(&gadget->dev, "%s, version: " DRIVER_VERSION "\n", DRIVER_DESC); @@ -232,11 +197,12 @@ static int __exit cdc_unbind(struct usb_composite_dev *cdev) return 0; } -static struct usb_composite_driver cdc_driver = { +static __refdata struct usb_composite_driver cdc_driver = { .name = "g_cdc", .dev = &device_desc, .strings = dev_strings, .max_speed = USB_SPEED_HIGH, + .bind = cdc_bind, .unbind = __exit_p(cdc_unbind), }; @@ -246,7 +212,7 @@ MODULE_LICENSE("GPL"); static int __init init(void) { - return usb_composite_probe(&cdc_driver, cdc_bind); + return usb_composite_probe(&cdc_driver); } module_init(init); diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index 3f72110da1b0..957f973dd96a 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -28,44 +28,6 @@ * with the relevant device-wide data. */ -/* big enough to hold our biggest descriptor */ -#define USB_BUFSIZ 1024 - -static struct usb_composite_driver *composite; -static int (*composite_gadget_bind)(struct usb_composite_dev *cdev); - -/* Some systems will need runtime overrides for the product identifiers - * published in the device descriptor, either numbers or strings or both. - * String parameters are in UTF-8 (superset of ASCII's 7 bit characters). - */ - -static ushort idVendor; -module_param(idVendor, ushort, 0644); -MODULE_PARM_DESC(idVendor, "USB Vendor ID"); - -static ushort idProduct; -module_param(idProduct, ushort, 0644); -MODULE_PARM_DESC(idProduct, "USB Product ID"); - -static ushort bcdDevice; -module_param(bcdDevice, ushort, 0644); -MODULE_PARM_DESC(bcdDevice, "USB Device version (BCD)"); - -static char *iManufacturer; -module_param(iManufacturer, charp, 0644); -MODULE_PARM_DESC(iManufacturer, "USB Manufacturer string"); - -static char *iProduct; -module_param(iProduct, charp, 0644); -MODULE_PARM_DESC(iProduct, "USB Product string"); - -static char *iSerialNumber; -module_param(iSerialNumber, charp, 0644); -MODULE_PARM_DESC(iSerialNumber, "SerialNumber string"); - -static char composite_manufacturer[50]; - -/*-------------------------------------------------------------------------*/ /** * next_ep_desc() - advance to the next EP descriptor * @t: currect pointer within descriptor array @@ -192,6 +154,7 @@ ep_found: } return 0; } +EXPORT_SYMBOL_GPL(config_ep_by_speed); /** * usb_add_function() - add a function to a configuration @@ -250,6 +213,7 @@ done: function->name, function, value); return value; } +EXPORT_SYMBOL_GPL(usb_add_function); /** * usb_function_deactivate - prevent function and gadget enumeration @@ -286,6 +250,7 @@ int usb_function_deactivate(struct usb_function *function) spin_unlock_irqrestore(&cdev->lock, flags); return status; } +EXPORT_SYMBOL_GPL(usb_function_deactivate); /** * usb_function_activate - allow function and gadget enumeration @@ -300,9 +265,10 @@ int usb_function_deactivate(struct usb_function *function) int usb_function_activate(struct usb_function *function) { struct usb_composite_dev *cdev = function->config->cdev; + unsigned long flags; int status = 0; - spin_lock(&cdev->lock); + spin_lock_irqsave(&cdev->lock, flags); if (WARN_ON(cdev->deactivations == 0)) status = -EINVAL; @@ -312,9 +278,10 @@ int usb_function_activate(struct usb_function *function) status = usb_gadget_connect(cdev->gadget); } - spin_unlock(&cdev->lock); + spin_unlock_irqrestore(&cdev->lock, flags); return status; } +EXPORT_SYMBOL_GPL(usb_function_activate); /** * usb_interface_id() - allocate an unused interface ID @@ -351,16 +318,18 @@ int usb_interface_id(struct usb_configuration *config, } return -ENODEV; } +EXPORT_SYMBOL_GPL(usb_interface_id); static int config_buf(struct usb_configuration *config, enum usb_device_speed speed, void *buf, u8 type) { struct usb_config_descriptor *c = buf; void *next = buf + USB_DT_CONFIG_SIZE; - int len = USB_BUFSIZ - USB_DT_CONFIG_SIZE; + int len; struct usb_function *f; int status; + len = USB_COMP_EP0_BUFSIZ - USB_DT_CONFIG_SIZE; /* write the config descriptor */ c = buf; c->bLength = USB_DT_CONFIG_SIZE; @@ -790,6 +759,7 @@ done: config->bConfigurationValue, status); return status; } +EXPORT_SYMBOL_GPL(usb_add_config); static void remove_config(struct usb_composite_dev *cdev, struct usb_configuration *config) @@ -889,10 +859,10 @@ static int lookup_string( static int get_string(struct usb_composite_dev *cdev, void *buf, u16 language, int id) { + struct usb_composite_driver *composite = cdev->driver; struct usb_configuration *c; struct usb_function *f; int len; - const char *str; /* Yes, not only is USB's I18N support probably more than most * folk will ever care about ... also, it's all supported here. @@ -932,26 +902,6 @@ static int get_string(struct usb_composite_dev *cdev, return s->bLength; } - /* Otherwise, look up and return a specified string. First - * check if the string has not been overridden. - */ - if (cdev->manufacturer_override == id) - str = iManufacturer ?: composite->iManufacturer ?: - composite_manufacturer; - else if (cdev->product_override == id) - str = iProduct ?: composite->iProduct; - else if (cdev->serial_override == id) - str = iSerialNumber ?: composite->iSerialNumber; - else - str = NULL; - if (str) { - struct usb_gadget_strings strings = { - .language = language, - .strings = &(struct usb_string) { 0xff, str } - }; - return usb_gadget_get_string(&strings, 0xff, buf); - } - /* String IDs are device-scoped, so we look up each string * table we're told about. These lookups are infrequent; * simpler-is-better here. @@ -1003,6 +953,7 @@ int usb_string_id(struct usb_composite_dev *cdev) } return -ENODEV; } +EXPORT_SYMBOL_GPL(usb_string_id); /** * usb_string_ids() - allocate unused string IDs in batch @@ -1034,6 +985,7 @@ int usb_string_ids_tab(struct usb_composite_dev *cdev, struct usb_string *str) return 0; } +EXPORT_SYMBOL_GPL(usb_string_ids_tab); /** * usb_string_ids_n() - allocate unused string IDs in batch @@ -1062,7 +1014,7 @@ int usb_string_ids_n(struct usb_composite_dev *c, unsigned n) c->next_string_id += n; return next + 1; } - +EXPORT_SYMBOL_GPL(usb_string_ids_n); /*-------------------------------------------------------------------------*/ @@ -1359,8 +1311,8 @@ static void composite_disconnect(struct usb_gadget *gadget) spin_lock_irqsave(&cdev->lock, flags); if (cdev->config) reset_config(cdev); - if (composite->disconnect) - composite->disconnect(cdev); + if (cdev->driver->disconnect) + cdev->driver->disconnect(cdev); spin_unlock_irqrestore(&cdev->lock, flags); } @@ -1396,35 +1348,67 @@ composite_unbind(struct usb_gadget *gadget) struct usb_configuration, list); remove_config(cdev, c); } - if (composite->unbind) - composite->unbind(cdev); + if (cdev->driver->unbind) + cdev->driver->unbind(cdev); if (cdev->req) { kfree(cdev->req->buf); usb_ep_free_request(gadget->ep0, cdev->req); } device_remove_file(&gadget->dev, &dev_attr_suspended); + kfree(cdev->def_manufacturer); kfree(cdev); set_gadget_data(gadget, NULL); - composite = NULL; } -static u8 override_id(struct usb_composite_dev *cdev, u8 *desc) +static void update_unchanged_dev_desc(struct usb_device_descriptor *new, + const struct usb_device_descriptor *old) { - if (!*desc) { - int ret = usb_string_id(cdev); - if (unlikely(ret < 0)) - WARNING(cdev, "failed to override string ID\n"); - else - *desc = ret; - } + __le16 idVendor; + __le16 idProduct; + __le16 bcdDevice; + u8 iSerialNumber; + u8 iManufacturer; + u8 iProduct; - return *desc; + /* + * these variables may have been set in + * usb_composite_overwrite_options() + */ + idVendor = new->idVendor; + idProduct = new->idProduct; + bcdDevice = new->bcdDevice; + iSerialNumber = new->iSerialNumber; + iManufacturer = new->iManufacturer; + iProduct = new->iProduct; + + *new = *old; + if (idVendor) + new->idVendor = idVendor; + if (idProduct) + new->idProduct = idProduct; + if (bcdDevice) + new->bcdDevice = bcdDevice; + else + new->bcdDevice = cpu_to_le16(get_default_bcdDevice()); + if (iSerialNumber) + new->iSerialNumber = iSerialNumber; + if (iManufacturer) + new->iManufacturer = iManufacturer; + if (iProduct) + new->iProduct = iProduct; } -static int composite_bind(struct usb_gadget *gadget) +static struct usb_composite_driver *to_cdriver(struct usb_gadget_driver *gdrv) +{ + return container_of(gdrv, struct usb_composite_driver, gadget_driver); +} + +static int composite_bind(struct usb_gadget *gadget, + struct usb_gadget_driver *gdriver) { struct usb_composite_dev *cdev; + struct usb_composite_driver *composite = to_cdriver(gdriver); int status = -ENOMEM; cdev = kzalloc(sizeof *cdev, GFP_KERNEL); @@ -1440,13 +1424,12 @@ static int composite_bind(struct usb_gadget *gadget) cdev->req = usb_ep_alloc_request(gadget->ep0, GFP_KERNEL); if (!cdev->req) goto fail; - cdev->req->buf = kmalloc(USB_BUFSIZ, GFP_KERNEL); + cdev->req->buf = kmalloc(USB_COMP_EP0_BUFSIZ, GFP_KERNEL); if (!cdev->req->buf) goto fail; cdev->req->complete = composite_setup_complete; gadget->ep0->driver_data = cdev; - cdev->bufsiz = USB_BUFSIZ; cdev->driver = composite; /* @@ -1467,49 +1450,11 @@ static int composite_bind(struct usb_gadget *gadget) * serial number), register function drivers, potentially update * power state and consumption, etc */ - status = composite_gadget_bind(cdev); + status = composite->bind(cdev); if (status < 0) goto fail; - cdev->desc = *composite->dev; - - /* standardized runtime overrides for device ID data */ - if (idVendor) - cdev->desc.idVendor = cpu_to_le16(idVendor); - else - idVendor = le16_to_cpu(cdev->desc.idVendor); - if (idProduct) - cdev->desc.idProduct = cpu_to_le16(idProduct); - else - idProduct = le16_to_cpu(cdev->desc.idProduct); - if (bcdDevice) - cdev->desc.bcdDevice = cpu_to_le16(bcdDevice); - else - bcdDevice = le16_to_cpu(cdev->desc.bcdDevice); - - /* string overrides */ - if (iManufacturer || !cdev->desc.iManufacturer) { - if (!iManufacturer && !composite->iManufacturer && - !*composite_manufacturer) - snprintf(composite_manufacturer, - sizeof composite_manufacturer, - "%s %s with %s", - init_utsname()->sysname, - init_utsname()->release, - gadget->name); - - cdev->manufacturer_override = - override_id(cdev, &cdev->desc.iManufacturer); - } - - if (iProduct || (!cdev->desc.iProduct && composite->iProduct)) - cdev->product_override = - override_id(cdev, &cdev->desc.iProduct); - - if (iSerialNumber || - (!cdev->desc.iSerialNumber && composite->iSerialNumber)) - cdev->serial_override = - override_id(cdev, &cdev->desc.iSerialNumber); + update_unchanged_dev_desc(&cdev->desc, composite->dev); /* has userspace failed to provide a serial number? */ if (composite->needs_serial && !cdev->desc.iSerialNumber) @@ -1546,8 +1491,8 @@ composite_suspend(struct usb_gadget *gadget) f->suspend(f); } } - if (composite->suspend) - composite->suspend(cdev); + if (cdev->driver->suspend) + cdev->driver->suspend(cdev); cdev->suspended = 1; @@ -1565,8 +1510,8 @@ composite_resume(struct usb_gadget *gadget) * suspend/resume callbacks? */ DBG(cdev, "resume\n"); - if (composite->resume) - composite->resume(cdev); + if (cdev->driver->resume) + cdev->driver->resume(cdev); if (cdev->config) { list_for_each_entry(f, &cdev->config->functions, list) { if (f->resume) @@ -1584,13 +1529,8 @@ composite_resume(struct usb_gadget *gadget) /*-------------------------------------------------------------------------*/ -static struct usb_gadget_driver composite_driver = { -#ifdef CONFIG_USB_GADGET_SUPERSPEED - .max_speed = USB_SPEED_SUPER, -#else - .max_speed = USB_SPEED_HIGH, -#endif - +static const struct usb_gadget_driver composite_driver_template = { + .bind = composite_bind, .unbind = composite_unbind, .setup = composite_setup, @@ -1623,25 +1563,26 @@ static struct usb_gadget_driver composite_driver = { * while it was binding. That would usually be done in order to wait for * some userspace participation. */ -int usb_composite_probe(struct usb_composite_driver *driver, - int (*bind)(struct usb_composite_dev *cdev)) +int usb_composite_probe(struct usb_composite_driver *driver) { - if (!driver || !driver->dev || !bind || composite) + struct usb_gadget_driver *gadget_driver; + + if (!driver || !driver->dev || !driver->bind) return -EINVAL; if (!driver->name) driver->name = "composite"; - if (!driver->iProduct) - driver->iProduct = driver->name; - composite_driver.function = (char *) driver->name; - composite_driver.driver.name = driver->name; - composite_driver.max_speed = - min_t(u8, composite_driver.max_speed, driver->max_speed); - composite = driver; - composite_gadget_bind = bind; - - return usb_gadget_probe_driver(&composite_driver, composite_bind); + + driver->gadget_driver = composite_driver_template; + gadget_driver = &driver->gadget_driver; + + gadget_driver->function = (char *) driver->name; + gadget_driver->driver.name = driver->name; + gadget_driver->max_speed = driver->max_speed; + + return usb_gadget_probe_driver(gadget_driver); } +EXPORT_SYMBOL_GPL(usb_composite_probe); /** * usb_composite_unregister() - unregister a composite driver @@ -1652,10 +1593,9 @@ int usb_composite_probe(struct usb_composite_driver *driver, */ void usb_composite_unregister(struct usb_composite_driver *driver) { - if (composite != driver) - return; - usb_gadget_unregister_driver(&composite_driver); + usb_gadget_unregister_driver(&driver->gadget_driver); } +EXPORT_SYMBOL_GPL(usb_composite_unregister); /** * usb_composite_setup_continue() - Continue with the control transfer @@ -1692,4 +1632,60 @@ void usb_composite_setup_continue(struct usb_composite_dev *cdev) spin_unlock_irqrestore(&cdev->lock, flags); } +EXPORT_SYMBOL_GPL(usb_composite_setup_continue); + +static char *composite_default_mfr(struct usb_gadget *gadget) +{ + char *mfr; + int len; + + len = snprintf(NULL, 0, "%s %s with %s", init_utsname()->sysname, + init_utsname()->release, gadget->name); + len++; + mfr = kmalloc(len, GFP_KERNEL); + if (!mfr) + return NULL; + snprintf(mfr, len, "%s %s with %s", init_utsname()->sysname, + init_utsname()->release, gadget->name); + return mfr; +} + +void usb_composite_overwrite_options(struct usb_composite_dev *cdev, + struct usb_composite_overwrite *covr) +{ + struct usb_device_descriptor *desc = &cdev->desc; + struct usb_gadget_strings *gstr = cdev->driver->strings[0]; + struct usb_string *dev_str = gstr->strings; + + if (covr->idVendor) + desc->idVendor = cpu_to_le16(covr->idVendor); + + if (covr->idProduct) + desc->idProduct = cpu_to_le16(covr->idProduct); + + if (covr->bcdDevice) + desc->bcdDevice = cpu_to_le16(covr->bcdDevice); + + if (covr->serial_number) { + desc->iSerialNumber = dev_str[USB_GADGET_SERIAL_IDX].id; + dev_str[USB_GADGET_SERIAL_IDX].s = covr->serial_number; + } + if (covr->manufacturer) { + desc->iManufacturer = dev_str[USB_GADGET_MANUFACTURER_IDX].id; + dev_str[USB_GADGET_MANUFACTURER_IDX].s = covr->manufacturer; + + } else if (!strlen(dev_str[USB_GADGET_MANUFACTURER_IDX].s)) { + desc->iManufacturer = dev_str[USB_GADGET_MANUFACTURER_IDX].id; + cdev->def_manufacturer = composite_default_mfr(cdev->gadget); + dev_str[USB_GADGET_MANUFACTURER_IDX].s = cdev->def_manufacturer; + } + + if (covr->product) { + desc->iProduct = dev_str[USB_GADGET_PRODUCT_IDX].id; + dev_str[USB_GADGET_PRODUCT_IDX].s = covr->product; + } +} +EXPORT_SYMBOL_GPL(usb_composite_overwrite_options); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("David Brownell"); diff --git a/drivers/usb/gadget/config.c b/drivers/usb/gadget/config.c index 7542a72ce51a..e3a98929d346 100644 --- a/drivers/usb/gadget/config.c +++ b/drivers/usb/gadget/config.c @@ -12,6 +12,7 @@ #include <linux/errno.h> #include <linux/slab.h> #include <linux/kernel.h> +#include <linux/module.h> #include <linux/list.h> #include <linux/string.h> #include <linux/device.h> @@ -53,7 +54,7 @@ usb_descriptor_fillbuf(void *buf, unsigned buflen, } return dest - (u8 *)buf; } - +EXPORT_SYMBOL_GPL(usb_descriptor_fillbuf); /** * usb_gadget_config_buf - builts a complete configuration descriptor @@ -106,6 +107,7 @@ int usb_gadget_config_buf( cp->bmAttributes |= USB_CONFIG_ATT_ONE; return len; } +EXPORT_SYMBOL_GPL(usb_gadget_config_buf); /** * usb_copy_descriptors - copy a vector of USB descriptors @@ -155,4 +157,4 @@ usb_copy_descriptors(struct usb_descriptor_header **src) return ret; } - +EXPORT_SYMBOL_GPL(usb_copy_descriptors); diff --git a/drivers/usb/gadget/dbgp.c b/drivers/usb/gadget/dbgp.c index 19d7bb0df75a..87d165028162 100644 --- a/drivers/usb/gadget/dbgp.c +++ b/drivers/usb/gadget/dbgp.c @@ -13,9 +13,6 @@ #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> -/* See comments in "zero.c" */ -#include "epautoconf.c" - #ifdef CONFIG_USB_G_DBGP_SERIAL #include "u_serial.c" #endif @@ -292,7 +289,8 @@ fail_1: return -ENODEV; } -static int __init dbgp_bind(struct usb_gadget *gadget) +static int __init dbgp_bind(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) { int err, stp; @@ -402,9 +400,10 @@ fail: return err; } -static struct usb_gadget_driver dbgp_driver = { +static __refdata struct usb_gadget_driver dbgp_driver = { .function = "dbgp", .max_speed = USB_SPEED_HIGH, + .bind = dbgp_bind, .unbind = dbgp_unbind, .setup = dbgp_setup, .disconnect = dbgp_disconnect, @@ -416,7 +415,7 @@ static struct usb_gadget_driver dbgp_driver = { static int __init dbgp_init(void) { - return usb_gadget_probe_driver(&dbgp_driver, dbgp_bind); + return usb_gadget_probe_driver(&dbgp_driver); } static void __exit dbgp_exit(void) diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index afdbb1cbf5d9..0f7541be28f3 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -909,6 +909,7 @@ static int dummy_udc_start(struct usb_gadget *g, dum->devstatus = 0; dum->driver = driver; + dum->gadget.dev.driver = &driver->driver; dev_dbg(udc_dev(dum), "binding gadget driver '%s'\n", driver->driver.name); return 0; @@ -923,6 +924,7 @@ static int dummy_udc_stop(struct usb_gadget *g, dev_dbg(udc_dev(dum), "unregister gadget driver '%s'\n", driver->driver.name); + dum->gadget.dev.driver = NULL; dum->driver = NULL; return 0; diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c index 51f3d42f5a64..a777f7bd11b4 100644 --- a/drivers/usb/gadget/epautoconf.c +++ b/drivers/usb/gadget/epautoconf.c @@ -10,6 +10,7 @@ */ #include <linux/kernel.h> +#include <linux/module.h> #include <linux/init.h> #include <linux/types.h> #include <linux/device.h> @@ -22,17 +23,6 @@ #include "gadget_chips.h" - -/* we must assign addresses for configurable endpoints (like net2280) */ -static unsigned epnum; - -// #define MANY_ENDPOINTS -#ifdef MANY_ENDPOINTS -/* more than 15 configurable endpoints */ -static unsigned in_epnum; -#endif - - /* * This should work with endpoints from controller drivers sharing the * same endpoint naming convention. By example: @@ -176,16 +166,14 @@ ep_matches ( if (isdigit (ep->name [2])) { u8 num = simple_strtoul (&ep->name [2], NULL, 10); desc->bEndpointAddress |= num; -#ifdef MANY_ENDPOINTS } else if (desc->bEndpointAddress & USB_DIR_IN) { - if (++in_epnum > 15) + if (++gadget->in_epnum > 15) return 0; - desc->bEndpointAddress = USB_DIR_IN | in_epnum; -#endif + desc->bEndpointAddress = USB_DIR_IN | gadget->in_epnum; } else { - if (++epnum > 15) + if (++gadget->out_epnum > 15) return 0; - desc->bEndpointAddress |= epnum; + desc->bEndpointAddress |= gadget->out_epnum; } /* report (variable) full speed bulk maxpacket */ @@ -328,6 +316,7 @@ found_ep: ep->comp_desc = NULL; return ep; } +EXPORT_SYMBOL_GPL(usb_ep_autoconfig_ss); /** * usb_ep_autoconfig() - choose an endpoint matching the @@ -367,7 +356,7 @@ struct usb_ep *usb_ep_autoconfig( { return usb_ep_autoconfig_ss(gadget, desc, NULL); } - +EXPORT_SYMBOL_GPL(usb_ep_autoconfig); /** * usb_ep_autoconfig_reset - reset endpoint autoconfig state @@ -385,9 +374,7 @@ void usb_ep_autoconfig_reset (struct usb_gadget *gadget) list_for_each_entry (ep, &gadget->ep_list, ep_list) { ep->driver_data = NULL; } -#ifdef MANY_ENDPOINTS - in_epnum = 0; -#endif - epnum = 0; + gadget->in_epnum = 0; + gadget->out_epnum = 0; } - +EXPORT_SYMBOL_GPL(usb_ep_autoconfig_reset); diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c index a28f6ffcd0f3..18c3f423706e 100644 --- a/drivers/usb/gadget/ether.c +++ b/drivers/usb/gadget/ether.c @@ -14,8 +14,6 @@ /* #define VERBOSE_DEBUG */ #include <linux/kernel.h> -#include <linux/utsname.h> - #if defined USB_ETH_RNDIS # undef USB_ETH_RNDIS @@ -102,11 +100,6 @@ static inline bool has_rndis(void) * the runtime footprint, and giving us at least some parts of what * a "gcc --combine ... part1.c part2.c part3.c ... " build would. */ -#include "composite.c" -#include "usbstring.c" -#include "config.c" -#include "epautoconf.c" - #include "f_ecm.c" #include "f_subset.c" #ifdef USB_ETH_RNDIS @@ -117,6 +110,7 @@ static inline bool has_rndis(void) #include "u_ether.c" /*-------------------------------------------------------------------------*/ +USB_GADGET_COMPOSITE_OPTIONS(); /* DO NOT REUSE THESE IDs with a protocol-incompatible driver!! Ever!! * Instead: allocate your own, using normal USB-IF procedures. @@ -195,17 +189,10 @@ static const struct usb_descriptor_header *otg_desc[] = { NULL, }; - -/* string IDs are assigned dynamically */ - -#define STRING_MANUFACTURER_IDX 0 -#define STRING_PRODUCT_IDX 1 - -static char manufacturer[50]; - static struct usb_string strings_dev[] = { - [STRING_MANUFACTURER_IDX].s = manufacturer, - [STRING_PRODUCT_IDX].s = PREFIX DRIVER_DESC, + [USB_GADGET_MANUFACTURER_IDX].s = "", + [USB_GADGET_PRODUCT_IDX].s = PREFIX DRIVER_DESC, + [USB_GADGET_SERIAL_IDX].s = "", { } /* end of list */ }; @@ -288,7 +275,6 @@ static struct usb_configuration eth_config_driver = { static int __init eth_bind(struct usb_composite_dev *cdev) { - int gcnum; struct usb_gadget *gadget = cdev->gadget; int status; @@ -323,42 +309,15 @@ static int __init eth_bind(struct usb_composite_dev *cdev) device_desc.bNumConfigurations = 2; } - gcnum = usb_gadget_controller_number(gadget); - if (gcnum >= 0) - device_desc.bcdDevice = cpu_to_le16(0x0300 | gcnum); - else { - /* We assume that can_support_ecm() tells the truth; - * but if the controller isn't recognized at all then - * that assumption is a bit more likely to be wrong. - */ - dev_warn(&gadget->dev, - "controller '%s' not recognized; trying %s\n", - gadget->name, - eth_config_driver.label); - device_desc.bcdDevice = - cpu_to_le16(0x0300 | 0x0099); - } - - /* Allocate string descriptor numbers ... note that string * contents can be overridden by the composite_dev glue. */ - /* device descriptor strings: manufacturer, product */ - snprintf(manufacturer, sizeof manufacturer, "%s %s with %s", - init_utsname()->sysname, init_utsname()->release, - gadget->name); - status = usb_string_id(cdev); - if (status < 0) - goto fail; - strings_dev[STRING_MANUFACTURER_IDX].id = status; - device_desc.iManufacturer = status; - - status = usb_string_id(cdev); + status = usb_string_ids_tab(cdev, strings_dev); if (status < 0) goto fail; - strings_dev[STRING_PRODUCT_IDX].id = status; - device_desc.iProduct = status; + device_desc.iManufacturer = strings_dev[USB_GADGET_MANUFACTURER_IDX].id; + device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id; /* register our configuration(s); RNDIS first, if it's used */ if (has_rndis()) { @@ -372,6 +331,7 @@ static int __init eth_bind(struct usb_composite_dev *cdev) if (status < 0) goto fail; + usb_composite_overwrite_options(cdev, &coverwrite); dev_info(&gadget->dev, "%s, version: " DRIVER_VERSION "\n", DRIVER_DESC); @@ -388,11 +348,12 @@ static int __exit eth_unbind(struct usb_composite_dev *cdev) return 0; } -static struct usb_composite_driver eth_driver = { +static __refdata struct usb_composite_driver eth_driver = { .name = "g_ether", .dev = &device_desc, .strings = dev_strings, .max_speed = USB_SPEED_SUPER, + .bind = eth_bind, .unbind = __exit_p(eth_unbind), }; @@ -402,7 +363,7 @@ MODULE_LICENSE("GPL"); static int __init init(void) { - return usb_composite_probe(ð_driver, eth_bind); + return usb_composite_probe(ð_driver); } module_init(init); diff --git a/drivers/usb/gadget/f_ecm.c b/drivers/usb/gadget/f_ecm.c index 30b908f2a53d..95bc94f8e570 100644 --- a/drivers/usb/gadget/f_ecm.c +++ b/drivers/usb/gadget/f_ecm.c @@ -897,10 +897,7 @@ ecm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]) return -ENOMEM; /* export host's Ethernet address in CDC format */ - snprintf(ecm->ethaddr, sizeof ecm->ethaddr, - "%02X%02X%02X%02X%02X%02X", - ethaddr[0], ethaddr[1], ethaddr[2], - ethaddr[3], ethaddr[4], ethaddr[5]); + snprintf(ecm->ethaddr, sizeof ecm->ethaddr, "%pm", ethaddr); ecm_string_defs[1].s = ecm->ethaddr; ecm->port.cdc_filter = DEFAULT_FILTER; diff --git a/drivers/usb/gadget/f_hid.c b/drivers/usb/gadget/f_hid.c index 16a8b1c15c62..511e527178e2 100644 --- a/drivers/usb/gadget/f_hid.c +++ b/drivers/usb/gadget/f_hid.c @@ -10,7 +10,6 @@ */ #include <linux/kernel.h> -#include <linux/utsname.h> #include <linux/module.h> #include <linux/hid.h> #include <linux/cdev.h> @@ -18,6 +17,7 @@ #include <linux/poll.h> #include <linux/uaccess.h> #include <linux/wait.h> +#include <linux/sched.h> #include <linux/usb/g_hid.h> static int major, minors; diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c index 4f1142efa6d1..3a7668bde3ef 100644 --- a/drivers/usb/gadget/f_mass_storage.c +++ b/drivers/usb/gadget/f_mass_storage.c @@ -213,7 +213,6 @@ #include <linux/spinlock.h> #include <linux/string.h> #include <linux/freezer.h> -#include <linux/utsname.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> @@ -349,7 +348,6 @@ struct fsg_config { const char *vendor_name; /* 8 characters or less */ const char *product_name; /* 16 characters or less */ - u16 release; char can_stall; }; @@ -2773,18 +2771,7 @@ buffhds_first_it: bh->next = common->buffhds; /* Prepare inquiryString */ - if (cfg->release != 0xffff) { - i = cfg->release; - } else { - i = usb_gadget_controller_number(gadget); - if (i >= 0) { - i = 0x0300 + i; - } else { - WARNING(common, "controller '%s' not recognized\n", - gadget->name); - i = 0x0399; - } - } + i = get_default_bcdDevice(); snprintf(common->inquiry_string, sizeof common->inquiry_string, "%-8s%-16s%04x", cfg->vendor_name ?: "Linux", /* Assume product name dependent on the first LUN */ @@ -3110,7 +3097,6 @@ fsg_config_from_params(struct fsg_config *cfg, /* Let MSF use defaults */ cfg->vendor_name = 0; cfg->product_name = 0; - cfg->release = 0xffff; cfg->ops = NULL; cfg->private_data = NULL; diff --git a/drivers/usb/gadget/f_midi.c b/drivers/usb/gadget/f_midi.c index 2f7e8f2930cc..8ed1259fe80d 100644 --- a/drivers/usb/gadget/f_midi.c +++ b/drivers/usb/gadget/f_midi.c @@ -21,7 +21,6 @@ #include <linux/kernel.h> #include <linux/slab.h> -#include <linux/utsname.h> #include <linux/device.h> #include <sound/core.h> diff --git a/drivers/usb/gadget/f_ncm.c b/drivers/usb/gadget/f_ncm.c index aab8eded045b..b651b529c67f 100644 --- a/drivers/usb/gadget/f_ncm.c +++ b/drivers/usb/gadget/f_ncm.c @@ -1346,10 +1346,7 @@ int __init ncm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]) return -ENOMEM; /* export host's Ethernet address in CDC format */ - snprintf(ncm->ethaddr, sizeof ncm->ethaddr, - "%02X%02X%02X%02X%02X%02X", - ethaddr[0], ethaddr[1], ethaddr[2], - ethaddr[3], ethaddr[4], ethaddr[5]); + snprintf(ncm->ethaddr, sizeof ncm->ethaddr, "%pm", ethaddr); ncm_string_defs[1].s = ncm->ethaddr; spin_lock_init(&ncm->lock); diff --git a/drivers/usb/gadget/f_sourcesink.c b/drivers/usb/gadget/f_sourcesink.c index 5c1b68b63c98..3c126fde6e7e 100644 --- a/drivers/usb/gadget/f_sourcesink.c +++ b/drivers/usb/gadget/f_sourcesink.c @@ -795,7 +795,7 @@ static int sourcesink_setup(struct usb_configuration *c, u16 w_value = le16_to_cpu(ctrl->wValue); u16 w_length = le16_to_cpu(ctrl->wLength); - req->length = USB_BUFSIZ; + req->length = USB_COMP_EP0_BUFSIZ; /* composite driver infrastructure handles everything except * the two control test requests. diff --git a/drivers/usb/gadget/f_subset.c b/drivers/usb/gadget/f_subset.c index 21ab474aca07..4060c0bd9785 100644 --- a/drivers/usb/gadget/f_subset.c +++ b/drivers/usb/gadget/f_subset.c @@ -436,10 +436,7 @@ int geth_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]) return -ENOMEM; /* export host's Ethernet address in CDC format */ - snprintf(geth->ethaddr, sizeof geth->ethaddr, - "%02X%02X%02X%02X%02X%02X", - ethaddr[0], ethaddr[1], ethaddr[2], - ethaddr[3], ethaddr[4], ethaddr[5]); + snprintf(geth->ethaddr, sizeof geth->ethaddr, "%pm", ethaddr); geth_string_defs[1].s = geth->ethaddr; geth->port.cdc_filter = DEFAULT_FILTER; diff --git a/drivers/usb/gadget/f_uac2.c b/drivers/usb/gadget/f_uac2.c index e7cc4de93e33..d3c6cffccb72 100644 --- a/drivers/usb/gadget/f_uac2.c +++ b/drivers/usb/gadget/f_uac2.c @@ -463,7 +463,7 @@ snd_fail: return err; } -static int __devexit snd_uac2_remove(struct platform_device *pdev) +static int snd_uac2_remove(struct platform_device *pdev) { struct snd_card *card = platform_get_drvdata(pdev); diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c index a896d73f7a93..3f7d640b6758 100644 --- a/drivers/usb/gadget/file_storage.c +++ b/drivers/usb/gadget/file_storage.c @@ -251,26 +251,12 @@ #include <linux/freezer.h> #include <linux/utsname.h> +#include <linux/usb/composite.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> #include "gadget_chips.h" - - -/* - * Kbuild is not very cooperative with respect to linking separately - * compiled library objects into one module. So for now we won't use - * separate compilation ... ensuring init/exit sections work to shrink - * the runtime footprint, and giving us at least some parts of what - * a "gcc --combine ... part1.c part2.c part3.c ... " build would. - */ -#include "usbstring.c" -#include "config.c" -#include "epautoconf.c" - -/*-------------------------------------------------------------------------*/ - #define DRIVER_DESC "File-backed Storage Gadget" #define DRIVER_NAME "g_file_storage" #define DRIVER_VERSION "1 September 2010" @@ -3213,7 +3199,6 @@ static void /* __init_or_exit */ fsg_unbind(struct usb_gadget *gadget) static int __init check_parameters(struct fsg_dev *fsg) { int prot; - int gcnum; /* Store the default values */ mod_data.transport_type = USB_PR_BULK; @@ -3228,16 +3213,8 @@ static int __init check_parameters(struct fsg_dev *fsg) if (gadget_is_at91(fsg->gadget)) mod_data.can_stall = 0; - if (mod_data.release == 0xffff) { // Parameter wasn't set - gcnum = usb_gadget_controller_number(fsg->gadget); - if (gcnum >= 0) - mod_data.release = 0x0300 + gcnum; - else { - WARNING(fsg, "controller '%s' not recognized\n", - fsg->gadget->name); - mod_data.release = 0x0399; - } - } + if (mod_data.release == 0xffff) + mod_data.release = get_default_bcdDevice(); prot = simple_strtol(mod_data.protocol_parm, NULL, 0); @@ -3331,7 +3308,8 @@ static int __init check_parameters(struct fsg_dev *fsg) } -static int __init fsg_bind(struct usb_gadget *gadget) +static int __init fsg_bind(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) { struct fsg_dev *fsg = the_fsg; int rc; @@ -3603,9 +3581,10 @@ static void fsg_resume(struct usb_gadget *gadget) /*-------------------------------------------------------------------------*/ -static struct usb_gadget_driver fsg_driver = { +static __refdata struct usb_gadget_driver fsg_driver = { .max_speed = USB_SPEED_SUPER, .function = (char *) fsg_string_product, + .bind = fsg_bind, .unbind = fsg_unbind, .disconnect = fsg_disconnect, .setup = fsg_setup, @@ -3653,7 +3632,8 @@ static int __init fsg_init(void) if ((rc = fsg_alloc()) != 0) return rc; fsg = the_fsg; - if ((rc = usb_gadget_probe_driver(&fsg_driver, fsg_bind)) != 0) + rc = usb_gadget_probe_driver(&fsg_driver); + if (rc != 0) kref_put(&fsg->ref, fsg_release); return rc; } diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c index 3def828f85e7..6ae70cba0c4a 100644 --- a/drivers/usb/gadget/fsl_udc_core.c +++ b/drivers/usb/gadget/fsl_udc_core.c @@ -1255,7 +1255,7 @@ static int fsl_pullup(struct usb_gadget *gadget, int is_on) } static int fsl_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)); + int (*bind)(struct usb_gadget *, struct usb_gadget_driver *)); static int fsl_stop(struct usb_gadget_driver *driver); /* defined in gadget.h */ static struct usb_gadget_ops fsl_gadget_ops = { @@ -1951,7 +1951,7 @@ static irqreturn_t fsl_udc_irq(int irq, void *_udc) * Called by initialization code of gadget drivers *----------------------------------------------------------------*/ static int fsl_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)) + int (*bind)(struct usb_gadget *, struct usb_gadget_driver *)) { int retval = -ENODEV; unsigned long flags = 0; @@ -1976,7 +1976,7 @@ static int fsl_start(struct usb_gadget_driver *driver, spin_unlock_irqrestore(&udc_controller->lock, flags); /* bind udc driver to gadget driver */ - retval = bind(&udc_controller->gadget); + retval = bind(&udc_controller->gadget, driver); if (retval) { VDBG("bind to %s --> %d", driver->driver.name, retval); udc_controller->gadget.dev.driver = NULL; diff --git a/drivers/usb/gadget/fusb300_udc.c b/drivers/usb/gadget/fusb300_udc.c index cdd94540e1cd..72cd5e6719db 100644 --- a/drivers/usb/gadget/fusb300_udc.c +++ b/drivers/usb/gadget/fusb300_udc.c @@ -1311,7 +1311,7 @@ static void init_controller(struct fusb300 *fusb300) static struct fusb300 *the_controller; static int fusb300_udc_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)) + int (*bind)(struct usb_gadget *, struct usb_gadget_driver *)) { struct fusb300 *fusb300 = the_controller; int retval; @@ -1339,7 +1339,7 @@ static int fusb300_udc_start(struct usb_gadget_driver *driver, goto error; } - retval = bind(&fusb300->gadget); + retval = bind(&fusb300->gadget, driver); if (retval) { pr_err("bind to driver error (%d)\n", retval); device_del(&fusb300->gadget.dev); diff --git a/drivers/usb/gadget/g_ffs.c b/drivers/usb/gadget/g_ffs.c index d3ace9002a6a..3953dd4d7186 100644 --- a/drivers/usb/gadget/g_ffs.c +++ b/drivers/usb/gadget/g_ffs.c @@ -13,7 +13,6 @@ #define pr_fmt(fmt) "g_ffs: " fmt #include <linux/module.h> -#include <linux/utsname.h> /* * kbuild is not very cooperative with respect to linking separately @@ -22,12 +21,6 @@ * the runtime footprint, and giving us at least some parts of what * a "gcc --combine ... part1.c part2.c part3.c ... " build would. */ - -#include "composite.c" -#include "usbstring.c" -#include "config.c" -#include "epautoconf.c" - #if defined CONFIG_USB_FUNCTIONFS_ETH || defined CONFIG_USB_FUNCTIONFS_RNDIS # if defined USB_ETH_RNDIS # undef USB_ETH_RNDIS @@ -76,6 +69,8 @@ struct gfs_ffs_obj { struct ffs_data *ffs_data; }; +USB_GADGET_COMPOSITE_OPTIONS(); + static struct usb_device_descriptor gfs_dev_desc = { .bLength = sizeof gfs_dev_desc, .bDescriptorType = USB_DT_DEVICE, @@ -117,6 +112,9 @@ static const struct usb_descriptor_header *gfs_otg_desc[] = { /* String IDs are assigned dynamically */ static struct usb_string gfs_strings[] = { + [USB_GADGET_MANUFACTURER_IDX].s = "", + [USB_GADGET_PRODUCT_IDX].s = DRIVER_DESC, + [USB_GADGET_SERIAL_IDX].s = "", #ifdef CONFIG_USB_FUNCTIONFS_RNDIS { .s = "FunctionFS + RNDIS" }, #endif @@ -163,13 +161,13 @@ static int gfs_bind(struct usb_composite_dev *cdev); static int gfs_unbind(struct usb_composite_dev *cdev); static int gfs_do_config(struct usb_configuration *c); -static struct usb_composite_driver gfs_driver = { +static __refdata struct usb_composite_driver gfs_driver = { .name = DRIVER_NAME, .dev = &gfs_dev_desc, .strings = gfs_dev_strings, .max_speed = USB_SPEED_HIGH, + .bind = gfs_bind, .unbind = gfs_unbind, - .iProduct = DRIVER_DESC, }; static DEFINE_MUTEX(gfs_lock); @@ -268,7 +266,7 @@ static int functionfs_ready_callback(struct ffs_data *ffs) } gfs_registered = true; - ret = usb_composite_probe(&gfs_driver, gfs_bind); + ret = usb_composite_probe(&gfs_driver); if (unlikely(ret < 0)) gfs_registered = false; @@ -357,6 +355,7 @@ static int gfs_bind(struct usb_composite_dev *cdev) ret = usb_string_ids_tab(cdev, gfs_strings); if (unlikely(ret < 0)) goto error; + gfs_dev_desc.iProduct = gfs_strings[USB_GADGET_PRODUCT_IDX].id; for (i = func_num; --i; ) { ret = functionfs_bind(ffs_tab[i].ffs_data, cdev); @@ -369,9 +368,10 @@ static int gfs_bind(struct usb_composite_dev *cdev) for (i = 0; i < ARRAY_SIZE(gfs_configurations); ++i) { struct gfs_configuration *c = gfs_configurations + i; + int sid = USB_GADGET_FIRST_AVAIL_IDX + i; - c->c.label = gfs_strings[i].s; - c->c.iConfiguration = gfs_strings[i].id; + c->c.label = gfs_strings[sid].s; + c->c.iConfiguration = gfs_strings[sid].id; c->c.bConfigurationValue = 1 + i; c->c.bmAttributes = USB_CONFIG_ATT_SELFPOWER; @@ -379,7 +379,7 @@ static int gfs_bind(struct usb_composite_dev *cdev) if (unlikely(ret < 0)) goto error_unbind; } - + usb_composite_overwrite_options(cdev, &coverwrite); return 0; error_unbind: diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h index b8b3a3411218..bcd04bc66b98 100644 --- a/drivers/usb/gadget/gadget_chips.h +++ b/drivers/usb/gadget/gadget_chips.h @@ -15,6 +15,8 @@ #ifndef __GADGET_CHIPS_H #define __GADGET_CHIPS_H +#include <linux/usb/gadget.h> + /* * NOTICE: the entries below are alphabetical and should be kept * that way. @@ -25,106 +27,12 @@ * If you have forgotten the alphabetical order let VIM/EMACS * do that for you. */ -#define gadget_is_amd5536udc(g) (!strcmp("amd5536udc", (g)->name)) #define gadget_is_at91(g) (!strcmp("at91_udc", (g)->name)) -#define gadget_is_atmel_usba(g) (!strcmp("atmel_usba_udc", (g)->name)) -#define gadget_is_ci13xxx_msm(g) (!strcmp("ci13xxx_msm", (g)->name)) -#define gadget_is_ci13xxx_pci(g) (!strcmp("ci13xxx_pci", (g)->name)) -#define gadget_is_dummy(g) (!strcmp("dummy_udc", (g)->name)) -#define gadget_is_dwc3(g) (!strcmp("dwc3-gadget", (g)->name)) -#define gadget_is_fsl_qe(g) (!strcmp("fsl_qe_udc", (g)->name)) -#define gadget_is_fsl_usb2(g) (!strcmp("fsl-usb2-udc", (g)->name)) #define gadget_is_goku(g) (!strcmp("goku_udc", (g)->name)) -#define gadget_is_imx(g) (!strcmp("imx_udc", (g)->name)) -#define gadget_is_langwell(g) (!strcmp("langwell_udc", (g)->name)) -#define gadget_is_lpc32xx(g) (!strcmp("lpc32xx_udc", (g)->name)) -#define gadget_is_m66592(g) (!strcmp("m66592_udc", (g)->name)) #define gadget_is_musbhdrc(g) (!strcmp("musb-hdrc", (g)->name)) -#define gadget_is_net2272(g) (!strcmp("net2272", (g)->name)) #define gadget_is_net2280(g) (!strcmp("net2280", (g)->name)) -#define gadget_is_omap(g) (!strcmp("omap_udc", (g)->name)) -#define gadget_is_pch(g) (!strcmp("pch_udc", (g)->name)) #define gadget_is_pxa(g) (!strcmp("pxa25x_udc", (g)->name)) #define gadget_is_pxa27x(g) (!strcmp("pxa27x_udc", (g)->name)) -#define gadget_is_r8a66597(g) (!strcmp("r8a66597_udc", (g)->name)) -#define gadget_is_renesas_usbhs(g) (!strcmp("renesas_usbhs_udc", (g)->name)) -#define gadget_is_s3c2410(g) (!strcmp("s3c2410_udc", (g)->name)) -#define gadget_is_s3c_hsotg(g) (!strcmp("s3c-hsotg", (g)->name)) -#define gadget_is_s3c_hsudc(g) (!strcmp("s3c-hsudc", (g)->name)) - -/** - * usb_gadget_controller_number - support bcdDevice id convention - * @gadget: the controller being driven - * - * Return a 2-digit BCD value associated with the peripheral controller, - * suitable for use as part of a bcdDevice value, or a negative error code. - * - * NOTE: this convention is purely optional, and has no meaning in terms of - * any USB specification. If you want to use a different convention in your - * gadget driver firmware -- maybe a more formal revision ID -- feel free. - * - * Hosts see these bcdDevice numbers, and are allowed (but not encouraged!) - * to change their behavior accordingly. For example it might help avoiding - * some chip bug. - */ -static inline int usb_gadget_controller_number(struct usb_gadget *gadget) -{ - if (gadget_is_net2280(gadget)) - return 0x01; - else if (gadget_is_dummy(gadget)) - return 0x02; - else if (gadget_is_pxa(gadget)) - return 0x03; - else if (gadget_is_goku(gadget)) - return 0x06; - else if (gadget_is_omap(gadget)) - return 0x08; - else if (gadget_is_pxa27x(gadget)) - return 0x11; - else if (gadget_is_s3c2410(gadget)) - return 0x12; - else if (gadget_is_at91(gadget)) - return 0x13; - else if (gadget_is_imx(gadget)) - return 0x14; - else if (gadget_is_musbhdrc(gadget)) - return 0x16; - else if (gadget_is_atmel_usba(gadget)) - return 0x18; - else if (gadget_is_fsl_usb2(gadget)) - return 0x19; - else if (gadget_is_amd5536udc(gadget)) - return 0x20; - else if (gadget_is_m66592(gadget)) - return 0x21; - else if (gadget_is_fsl_qe(gadget)) - return 0x22; - else if (gadget_is_ci13xxx_pci(gadget)) - return 0x23; - else if (gadget_is_langwell(gadget)) - return 0x24; - else if (gadget_is_r8a66597(gadget)) - return 0x25; - else if (gadget_is_s3c_hsotg(gadget)) - return 0x26; - else if (gadget_is_pch(gadget)) - return 0x27; - else if (gadget_is_ci13xxx_msm(gadget)) - return 0x28; - else if (gadget_is_renesas_usbhs(gadget)) - return 0x29; - else if (gadget_is_s3c_hsudc(gadget)) - return 0x30; - else if (gadget_is_net2272(gadget)) - return 0x31; - else if (gadget_is_dwc3(gadget)) - return 0x32; - else if (gadget_is_lpc32xx(gadget)) - return 0x33; - - return -ENOENT; -} - /** * gadget_supports_altsettings - return true if altsettings work diff --git a/drivers/usb/gadget/gmidi.c b/drivers/usb/gadget/gmidi.c index 681bd038b1d8..881aab86ae99 100644 --- a/drivers/usb/gadget/gmidi.c +++ b/drivers/usb/gadget/gmidi.c @@ -22,7 +22,6 @@ #include <linux/kernel.h> #include <linux/slab.h> -#include <linux/utsname.h> #include <linux/module.h> #include <linux/device.h> @@ -31,16 +30,13 @@ #include <sound/rawmidi.h> #include <linux/usb/ch9.h> +#include <linux/usb/composite.h> #include <linux/usb/gadget.h> #include <linux/usb/audio.h> #include <linux/usb/midi.h> #include "gadget_chips.h" -#include "composite.c" -#include "usbstring.c" -#include "config.c" -#include "epautoconf.c" #include "f_midi.c" /*-------------------------------------------------------------------------*/ @@ -51,6 +47,8 @@ MODULE_LICENSE("GPL v2"); static const char shortname[] = "g_midi"; static const char longname[] = "MIDI Gadget"; +USB_GADGET_COMPOSITE_OPTIONS(); + static int index = SNDRV_DEFAULT_IDX1; module_param(index, int, S_IRUGO); MODULE_PARM_DESC(index, "Index value for the USB MIDI Gadget adapter."); @@ -85,9 +83,7 @@ MODULE_PARM_DESC(out_ports, "Number of MIDI output ports"); /* string IDs are assigned dynamically */ -#define STRING_MANUFACTURER_IDX 0 -#define STRING_PRODUCT_IDX 1 -#define STRING_DESCRIPTION_IDX 2 +#define STRING_DESCRIPTION_IDX USB_GADGET_FIRST_AVAIL_IDX static struct usb_device_descriptor device_desc = { .bLength = USB_DT_DEVICE_SIZE, @@ -102,8 +98,9 @@ static struct usb_device_descriptor device_desc = { }; static struct usb_string strings_dev[] = { - [STRING_MANUFACTURER_IDX].s = "Grey Innovation", - [STRING_PRODUCT_IDX].s = "MIDI Gadget", + [USB_GADGET_MANUFACTURER_IDX].s = "Grey Innovation", + [USB_GADGET_PRODUCT_IDX].s = "MIDI Gadget", + [USB_GADGET_SERIAL_IDX].s = "", [STRING_DESCRIPTION_IDX].s = "MIDI", { } /* end of list */ }; @@ -140,61 +137,35 @@ static int __init midi_bind_config(struct usb_configuration *c) static int __init midi_bind(struct usb_composite_dev *cdev) { - struct usb_gadget *gadget = cdev->gadget; - int gcnum, status; - - status = usb_string_id(cdev); - if (status < 0) - return status; - strings_dev[STRING_MANUFACTURER_IDX].id = status; - device_desc.iManufacturer = status; + int status; - status = usb_string_id(cdev); + status = usb_string_ids_tab(cdev, strings_dev); if (status < 0) return status; - strings_dev[STRING_PRODUCT_IDX].id = status; - device_desc.iProduct = status; - - /* config description */ - status = usb_string_id(cdev); - if (status < 0) - return status; - strings_dev[STRING_DESCRIPTION_IDX].id = status; - - midi_config.iConfiguration = status; - - gcnum = usb_gadget_controller_number(gadget); - if (gcnum < 0) { - /* gmidi is so simple (no altsettings) that - * it SHOULD NOT have problems with bulk-capable hardware. - * so warn about unrecognized controllers, don't panic. - */ - pr_warning("%s: controller '%s' not recognized\n", - __func__, gadget->name); - device_desc.bcdDevice = cpu_to_le16(0x9999); - } else { - device_desc.bcdDevice = cpu_to_le16(0x0200 + gcnum); - } + device_desc.iManufacturer = strings_dev[USB_GADGET_MANUFACTURER_IDX].id; + device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id; + midi_config.iConfiguration = strings_dev[STRING_DESCRIPTION_IDX].id; status = usb_add_config(cdev, &midi_config, midi_bind_config); if (status < 0) return status; - + usb_composite_overwrite_options(cdev, &coverwrite); pr_info("%s\n", longname); return 0; } -static struct usb_composite_driver midi_driver = { +static __refdata struct usb_composite_driver midi_driver = { .name = (char *) longname, .dev = &device_desc, .strings = dev_strings, .max_speed = USB_SPEED_HIGH, + .bind = midi_bind, .unbind = __exit_p(midi_unbind), }; static int __init midi_init(void) { - return usb_composite_probe(&midi_driver, midi_bind); + return usb_composite_probe(&midi_driver); } module_init(midi_init); diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/goku_udc.c index 9fd7886cfa9a..51037cb78604 100644 --- a/drivers/usb/gadget/goku_udc.c +++ b/drivers/usb/gadget/goku_udc.c @@ -994,7 +994,7 @@ static int goku_get_frame(struct usb_gadget *_gadget) } static int goku_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)); + int (*bind)(struct usb_gadget *, struct usb_gadget_driver *)); static int goku_stop(struct usb_gadget_driver *driver); static const struct usb_gadget_ops goku_ops = { @@ -1348,7 +1348,7 @@ static struct goku_udc *the_controller; * the driver might get unbound. */ static int goku_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)) + int (*bind)(struct usb_gadget *, struct usb_gadget_driver *)) { struct goku_udc *dev = the_controller; int retval; @@ -1368,7 +1368,7 @@ static int goku_start(struct usb_gadget_driver *driver, driver->driver.bus = NULL; dev->driver = driver; dev->gadget.dev.driver = &driver->driver; - retval = bind(&dev->gadget); + retval = bind(&dev->gadget, driver); if (retval) { DBG(dev, "bind to driver %s --> error %d\n", driver->driver.name, retval); diff --git a/drivers/usb/gadget/hid.c b/drivers/usb/gadget/hid.c index 3493adf064f5..74130f6c12c0 100644 --- a/drivers/usb/gadget/hid.c +++ b/drivers/usb/gadget/hid.c @@ -15,7 +15,10 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/list.h> +#include <linux/module.h> +#include <linux/usb/composite.h> +#include "gadget_chips.h" #define DRIVER_DESC "HID Gadget" #define DRIVER_VERSION "2010/03/16" @@ -33,12 +36,6 @@ * the runtime footprint, and giving us at least some parts of what * a "gcc --combine ... part1.c part2.c part3.c ... " build would. */ - -#include "composite.c" -#include "usbstring.c" -#include "config.c" -#include "epautoconf.c" - #include "f_hid.c" @@ -50,6 +47,7 @@ struct hidg_func_node { static LIST_HEAD(hidg_func_list); /*-------------------------------------------------------------------------*/ +USB_GADGET_COMPOSITE_OPTIONS(); static struct usb_device_descriptor device_desc = { .bLength = sizeof device_desc, @@ -92,15 +90,10 @@ static const struct usb_descriptor_header *otg_desc[] = { /* string IDs are assigned dynamically */ - -#define STRING_MANUFACTURER_IDX 0 -#define STRING_PRODUCT_IDX 1 - -static char manufacturer[50]; - static struct usb_string strings_dev[] = { - [STRING_MANUFACTURER_IDX].s = manufacturer, - [STRING_PRODUCT_IDX].s = DRIVER_DESC, + [USB_GADGET_MANUFACTURER_IDX].s = "", + [USB_GADGET_PRODUCT_IDX].s = DRIVER_DESC, + [USB_GADGET_SERIAL_IDX].s = "", { } /* end of list */ }; @@ -150,7 +143,7 @@ static int __init hid_bind(struct usb_composite_dev *cdev) { struct usb_gadget *gadget = cdev->gadget; struct list_head *tmp; - int status, gcnum, funcs = 0; + int status, funcs = 0; list_for_each(tmp, &hidg_func_list) funcs++; @@ -163,38 +156,22 @@ static int __init hid_bind(struct usb_composite_dev *cdev) if (status < 0) return status; - gcnum = usb_gadget_controller_number(gadget); - if (gcnum >= 0) - device_desc.bcdDevice = cpu_to_le16(0x0300 | gcnum); - else - device_desc.bcdDevice = cpu_to_le16(0x0300 | 0x0099); - - /* Allocate string descriptor numbers ... note that string * contents can be overridden by the composite_dev glue. */ - /* device descriptor strings: manufacturer, product */ - snprintf(manufacturer, sizeof manufacturer, "%s %s with %s", - init_utsname()->sysname, init_utsname()->release, - gadget->name); - status = usb_string_id(cdev); - if (status < 0) - return status; - strings_dev[STRING_MANUFACTURER_IDX].id = status; - device_desc.iManufacturer = status; - - status = usb_string_id(cdev); + status = usb_string_ids_tab(cdev, strings_dev); if (status < 0) return status; - strings_dev[STRING_PRODUCT_IDX].id = status; - device_desc.iProduct = status; + device_desc.iManufacturer = strings_dev[USB_GADGET_MANUFACTURER_IDX].id; + device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id; /* register our configuration */ status = usb_add_config(cdev, &config_driver, do_config); if (status < 0) return status; + usb_composite_overwrite_options(cdev, &coverwrite); dev_info(&gadget->dev, DRIVER_DESC ", version: " DRIVER_VERSION "\n"); return 0; @@ -242,11 +219,12 @@ static int __devexit hidg_plat_driver_remove(struct platform_device *pdev) /****************************** Some noise ******************************/ -static struct usb_composite_driver hidg_driver = { +static __refdata struct usb_composite_driver hidg_driver = { .name = "g_hid", .dev = &device_desc, .strings = dev_strings, .max_speed = USB_SPEED_HIGH, + .bind = hid_bind, .unbind = __exit_p(hid_unbind), }; @@ -272,7 +250,7 @@ static int __init hidg_init(void) if (status < 0) return status; - status = usb_composite_probe(&hidg_driver, hid_bind); + status = usb_composite_probe(&hidg_driver); if (status < 0) platform_driver_unregister(&hidg_plat_driver); diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c index e58b16442971..4bb6d53f2de3 100644 --- a/drivers/usb/gadget/inode.c +++ b/drivers/usb/gadget/inode.c @@ -828,7 +828,6 @@ ep_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr) if (value == 0) data->state = STATE_EP_ENABLED; break; -#ifdef CONFIG_USB_GADGET_DUALSPEED case USB_SPEED_HIGH: /* fails if caller didn't provide that descriptor... */ ep->desc = &data->hs_desc; @@ -836,7 +835,6 @@ ep_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr) if (value == 0) data->state = STATE_EP_ENABLED; break; -#endif default: DBG(data->dev, "unconnected, %s init abandoned\n", data->name); @@ -1324,7 +1322,6 @@ static const struct file_operations ep0_io_operations = { * Unrecognized ep0 requests may be handled in user space. */ -#ifdef CONFIG_USB_GADGET_DUALSPEED static void make_qualifier (struct dev_data *dev) { struct usb_qualifier_descriptor qual; @@ -1347,7 +1344,6 @@ static void make_qualifier (struct dev_data *dev) memcpy (dev->rbuf, &qual, sizeof qual); } -#endif static int config_buf (struct dev_data *dev, u8 type, unsigned index) @@ -1427,7 +1423,6 @@ gadgetfs_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) dev->dev->bMaxPacketSize0 = dev->gadget->ep0->maxpacket; req->buf = dev->dev; break; -#ifdef CONFIG_USB_GADGET_DUALSPEED case USB_DT_DEVICE_QUALIFIER: if (!dev->hs_config) break; @@ -1437,7 +1432,6 @@ gadgetfs_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) break; case USB_DT_OTHER_SPEED_CONFIG: // FALLTHROUGH -#endif case USB_DT_CONFIG: value = config_buf (dev, w_value >> 8, @@ -1685,8 +1679,8 @@ gadgetfs_unbind (struct usb_gadget *gadget) static struct dev_data *the_device; -static int -gadgetfs_bind (struct usb_gadget *gadget) +static int gadgetfs_bind(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) { struct dev_data *dev = the_device; @@ -1763,12 +1757,8 @@ gadgetfs_suspend (struct usb_gadget *gadget) } static struct usb_gadget_driver gadgetfs_driver = { -#ifdef CONFIG_USB_GADGET_DUALSPEED - .max_speed = USB_SPEED_HIGH, -#else - .max_speed = USB_SPEED_FULL, -#endif .function = (char *) driver_desc, + .bind = gadgetfs_bind, .unbind = gadgetfs_unbind, .setup = gadgetfs_setup, .disconnect = gadgetfs_disconnect, @@ -1783,7 +1773,8 @@ static struct usb_gadget_driver gadgetfs_driver = { static void gadgetfs_nop(struct usb_gadget *arg) { } -static int gadgetfs_probe (struct usb_gadget *gadget) +static int gadgetfs_probe(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) { CHIP = gadget->name; return -EISNAM; @@ -1791,6 +1782,7 @@ static int gadgetfs_probe (struct usb_gadget *gadget) static struct usb_gadget_driver probe_driver = { .max_speed = USB_SPEED_HIGH, + .bind = gadgetfs_probe, .unbind = gadgetfs_nop, .setup = (void *)gadgetfs_nop, .disconnect = gadgetfs_nop, @@ -1900,7 +1892,12 @@ dev_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr) /* triggers gadgetfs_bind(); then we can enumerate. */ spin_unlock_irq (&dev->lock); - value = usb_gadget_probe_driver(&gadgetfs_driver, gadgetfs_bind); + if (dev->hs_config) + gadgetfs_driver.max_speed = USB_SPEED_HIGH; + else + gadgetfs_driver.max_speed = USB_SPEED_FULL; + + value = usb_gadget_probe_driver(&gadgetfs_driver); if (value != 0) { kfree (dev->buf); dev->buf = NULL; @@ -2039,7 +2036,7 @@ gadgetfs_fill_super (struct super_block *sb, void *opts, int silent) return -ESRCH; /* fake probe to determine $CHIP */ - (void) usb_gadget_probe_driver(&probe_driver, gadgetfs_probe); + usb_gadget_probe_driver(&probe_driver); if (!CHIP) return -ENODEV; diff --git a/drivers/usb/gadget/lpc32xx_udc.c b/drivers/usb/gadget/lpc32xx_udc.c index f1ec99e69cb7..f696fb9b136d 100644 --- a/drivers/usb/gadget/lpc32xx_udc.c +++ b/drivers/usb/gadget/lpc32xx_udc.c @@ -141,8 +141,6 @@ struct lpc32xx_ep { u32 totalints; bool wedge; - - const struct usb_endpoint_descriptor *desc; }; /* @@ -556,10 +554,8 @@ static int proc_udc_show(struct seq_file *s, void *unused) if (udc->enabled && udc->vbus) { proc_ep_show(s, &udc->ep[0]); - list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) { - if (ep->desc) - proc_ep_show(s, ep); - } + list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) + proc_ep_show(s, ep); } spin_unlock_irqrestore(&udc->lock, flags); @@ -1453,7 +1449,6 @@ static void udc_reinit(struct lpc32xx_udc *udc) if (i != 0) list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list); - ep->desc = NULL; ep->ep.maxpacket = ep->maxpacket; INIT_LIST_HEAD(&ep->queue); ep->req_pending = 0; @@ -1515,7 +1510,7 @@ static void nuke(struct lpc32xx_ep *ep, int status) done(ep, req, status); } - if (ep->desc && status == -ESHUTDOWN) { + if (status == -ESHUTDOWN) { uda_disable_hwepint(ep->udc, ep->hwep_num); udc_disable_hwep(ep->udc, ep->hwep_num); } @@ -1658,9 +1653,6 @@ static int lpc32xx_ep_disable(struct usb_ep *_ep) nuke(ep, -ESHUTDOWN); - /* restore the endpoint's pristine config */ - ep->desc = NULL; - /* Clear all DMA statuses for this EP */ udc_ep_dma_disable(udc, ep->hwep_num); writel(1 << ep->hwep_num, USBD_EOTINTCLR(udc->udp_baseaddr)); @@ -1696,7 +1688,7 @@ static int lpc32xx_ep_enable(struct usb_ep *_ep, unsigned long flags; /* Verify EP data */ - if ((!_ep) || (!ep) || (!desc) || (ep->desc) || + if ((!_ep) || (!ep) || (!desc) || (desc->bDescriptorType != USB_DT_ENDPOINT)) { dev_dbg(udc->dev, "bad ep or descriptor\n"); return -EINVAL; @@ -1754,7 +1746,6 @@ static int lpc32xx_ep_enable(struct usb_ep *_ep, /* Initialize endpoint to match the selected descriptor */ ep->is_in = (desc->bEndpointAddress & USB_DIR_IN) != 0; - ep->desc = desc; ep->ep.maxpacket = maxpacket; /* Map hardware endpoint from base and direction */ @@ -1837,7 +1828,7 @@ static int lpc32xx_ep_queue(struct usb_ep *_ep, udc = ep->udc; - if (!_ep || (!ep->desc && ep->hwep_num_base != 0)) { + if (!_ep) { dev_dbg(udc->dev, "invalid ep\n"); return -EINVAL; } @@ -1976,7 +1967,7 @@ static int lpc32xx_ep_set_halt(struct usb_ep *_ep, int value) struct lpc32xx_udc *udc = ep->udc; unsigned long flags; - if ((!ep) || (ep->desc == NULL) || (ep->hwep_num <= 1)) + if ((!ep) || (ep->hwep_num <= 1)) return -EINVAL; /* Don't halt an IN EP */ @@ -2262,7 +2253,7 @@ static int udc_get_status(struct lpc32xx_udc *udc, u16 reqtype, u16 wIndex) case USB_RECIP_ENDPOINT: tmp = wIndex & USB_ENDPOINT_NUMBER_MASK; ep = &udc->ep[tmp]; - if ((tmp == 0) || (tmp >= NUM_ENDPOINTS) || (tmp && !ep->desc)) + if ((tmp == 0) || (tmp >= NUM_ENDPOINTS)) return -EOPNOTSUPP; if (wIndex & USB_DIR_IN) { @@ -2599,9 +2590,8 @@ static int lpc32xx_pullup(struct usb_gadget *gadget, int is_on) return 0; } -static int lpc32xx_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)); -static int lpc32xx_stop(struct usb_gadget_driver *driver); +static int lpc32xx_start(struct usb_gadget *, struct usb_gadget_driver *); +static int lpc32xx_stop(struct usb_gadget *, struct usb_gadget_driver *); static const struct usb_gadget_ops lpc32xx_udc_ops = { .get_frame = lpc32xx_get_frame, @@ -2609,8 +2599,8 @@ static const struct usb_gadget_ops lpc32xx_udc_ops = { .set_selfpowered = lpc32xx_set_selfpowered, .vbus_session = lpc32xx_vbus_session, .pullup = lpc32xx_pullup, - .start = lpc32xx_start, - .stop = lpc32xx_stop, + .udc_start = lpc32xx_start, + .udc_stop = lpc32xx_stop, }; static void nop_release(struct device *dev) @@ -2618,10 +2608,9 @@ static void nop_release(struct device *dev) /* nothing to free */ } -static struct lpc32xx_udc controller = { +static const struct lpc32xx_udc controller_template = { .gadget = { .ops = &lpc32xx_udc_ops, - .ep0 = &controller.ep[0].ep, .name = driver_name, .dev = { .init_name = "gadget", @@ -2633,7 +2622,6 @@ static struct lpc32xx_udc controller = { .name = "ep0", .ops = &lpc32xx_ep_ops, }, - .udc = &controller, .maxpacket = 64, .hwep_num_base = 0, .hwep_num = 0, /* Can be 0 or 1, has special handling */ @@ -2645,7 +2633,6 @@ static struct lpc32xx_udc controller = { .name = "ep1-int", .ops = &lpc32xx_ep_ops, }, - .udc = &controller, .maxpacket = 64, .hwep_num_base = 2, .hwep_num = 0, /* 2 or 3, will be set later */ @@ -2657,7 +2644,6 @@ static struct lpc32xx_udc controller = { .name = "ep2-bulk", .ops = &lpc32xx_ep_ops, }, - .udc = &controller, .maxpacket = 64, .hwep_num_base = 4, .hwep_num = 0, /* 4 or 5, will be set later */ @@ -2669,7 +2655,6 @@ static struct lpc32xx_udc controller = { .name = "ep3-iso", .ops = &lpc32xx_ep_ops, }, - .udc = &controller, .maxpacket = 1023, .hwep_num_base = 6, .hwep_num = 0, /* 6 or 7, will be set later */ @@ -2681,7 +2666,6 @@ static struct lpc32xx_udc controller = { .name = "ep4-int", .ops = &lpc32xx_ep_ops, }, - .udc = &controller, .maxpacket = 64, .hwep_num_base = 8, .hwep_num = 0, /* 8 or 9, will be set later */ @@ -2693,7 +2677,6 @@ static struct lpc32xx_udc controller = { .name = "ep5-bulk", .ops = &lpc32xx_ep_ops, }, - .udc = &controller, .maxpacket = 64, .hwep_num_base = 10, .hwep_num = 0, /* 10 or 11, will be set later */ @@ -2705,7 +2688,6 @@ static struct lpc32xx_udc controller = { .name = "ep6-iso", .ops = &lpc32xx_ep_ops, }, - .udc = &controller, .maxpacket = 1023, .hwep_num_base = 12, .hwep_num = 0, /* 12 or 13, will be set later */ @@ -2717,7 +2699,6 @@ static struct lpc32xx_udc controller = { .name = "ep7-int", .ops = &lpc32xx_ep_ops, }, - .udc = &controller, .maxpacket = 64, .hwep_num_base = 14, .hwep_num = 0, @@ -2729,7 +2710,6 @@ static struct lpc32xx_udc controller = { .name = "ep8-bulk", .ops = &lpc32xx_ep_ops, }, - .udc = &controller, .maxpacket = 64, .hwep_num_base = 16, .hwep_num = 0, @@ -2741,7 +2721,6 @@ static struct lpc32xx_udc controller = { .name = "ep9-iso", .ops = &lpc32xx_ep_ops, }, - .udc = &controller, .maxpacket = 1023, .hwep_num_base = 18, .hwep_num = 0, @@ -2753,7 +2732,6 @@ static struct lpc32xx_udc controller = { .name = "ep10-int", .ops = &lpc32xx_ep_ops, }, - .udc = &controller, .maxpacket = 64, .hwep_num_base = 20, .hwep_num = 0, @@ -2765,7 +2743,6 @@ static struct lpc32xx_udc controller = { .name = "ep11-bulk", .ops = &lpc32xx_ep_ops, }, - .udc = &controller, .maxpacket = 64, .hwep_num_base = 22, .hwep_num = 0, @@ -2777,7 +2754,6 @@ static struct lpc32xx_udc controller = { .name = "ep12-iso", .ops = &lpc32xx_ep_ops, }, - .udc = &controller, .maxpacket = 1023, .hwep_num_base = 24, .hwep_num = 0, @@ -2789,7 +2765,6 @@ static struct lpc32xx_udc controller = { .name = "ep13-int", .ops = &lpc32xx_ep_ops, }, - .udc = &controller, .maxpacket = 64, .hwep_num_base = 26, .hwep_num = 0, @@ -2801,7 +2776,6 @@ static struct lpc32xx_udc controller = { .name = "ep14-bulk", .ops = &lpc32xx_ep_ops, }, - .udc = &controller, .maxpacket = 64, .hwep_num_base = 28, .hwep_num = 0, @@ -2813,7 +2787,6 @@ static struct lpc32xx_udc controller = { .name = "ep15-bulk", .ops = &lpc32xx_ep_ops, }, - .udc = &controller, .maxpacket = 1023, .hwep_num_base = 30, .hwep_num = 0, @@ -2987,14 +2960,13 @@ static irqreturn_t lpc32xx_usb_vbus_irq(int irq, void *_udc) return IRQ_HANDLED; } -static int lpc32xx_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)) +static int lpc32xx_start(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) { - struct lpc32xx_udc *udc = &controller; - int retval, i; + struct lpc32xx_udc *udc = to_udc(gadget); + int i; - if (!driver || driver->max_speed < USB_SPEED_FULL || - !bind || !driver->setup) { + if (!driver || driver->max_speed < USB_SPEED_FULL || !driver->setup) { dev_err(udc->dev, "bad parameter.\n"); return -EINVAL; } @@ -3011,18 +2983,6 @@ static int lpc32xx_start(struct usb_gadget_driver *driver, udc->selfpowered = 1; udc->vbus = 0; - retval = bind(&udc->gadget); - if (retval) { - dev_err(udc->dev, "bind() returned %d\n", retval); - udc->enabled = 0; - udc->selfpowered = 0; - udc->driver = NULL; - udc->gadget.dev.driver = NULL; - return retval; - } - - dev_dbg(udc->dev, "bound to %s\n", driver->driver.name); - /* Force VBUS process once to check for cable insertion */ udc->last_vbus = udc->vbus = 0; schedule_work(&udc->vbus_job); @@ -3034,22 +2994,19 @@ static int lpc32xx_start(struct usb_gadget_driver *driver, return 0; } -static int lpc32xx_stop(struct usb_gadget_driver *driver) +static int lpc32xx_stop(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) { int i; - struct lpc32xx_udc *udc = &controller; + struct lpc32xx_udc *udc = to_udc(gadget); - if (!driver || driver != udc->driver || !driver->unbind) + if (!driver || driver != udc->driver) return -EINVAL; - /* Disable USB pullup */ - isp1301_pullup_enable(udc, 0, 1); - for (i = IRQ_USB_LP; i <= IRQ_USB_ATX; i++) disable_irq(udc->udp_irq[i]); if (udc->clocked) { - spin_lock(&udc->lock); stop_activity(udc); spin_unlock(&udc->lock); @@ -3069,20 +3026,16 @@ static int lpc32xx_stop(struct usb_gadget_driver *driver) } udc->enabled = 0; - pullup(udc, 0); - - driver->unbind(&udc->gadget); udc->gadget.dev.driver = NULL; udc->driver = NULL; - dev_dbg(udc->dev, "unbound from %s\n", driver->driver.name); return 0; } static void lpc32xx_udc_shutdown(struct platform_device *dev) { /* Force disconnect on reboot */ - struct lpc32xx_udc *udc = &controller; + struct lpc32xx_udc *udc = platform_get_drvdata(dev); pullup(udc, 0); } @@ -3120,12 +3073,21 @@ static u64 lpc32xx_usbd_dmamask = ~(u32) 0x7F; static int __init lpc32xx_udc_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; - struct lpc32xx_udc *udc = &controller; + struct lpc32xx_udc *udc; int retval, i; struct resource *res; dma_addr_t dma_handle; struct device_node *isp1301_node; + udc = kzalloc(sizeof(*udc), GFP_KERNEL); + if (!udc) + return -ENOMEM; + + memcpy(udc, &controller_template, sizeof(*udc)); + for (i = 0; i <= 15; i++) + udc->ep[i].udc = udc; + udc->gadget.ep0 = &udc->ep[0].ep; + /* init software state */ udc->gadget.dev.parent = dev; udc->pdev = pdev; @@ -3140,8 +3102,10 @@ static int __init lpc32xx_udc_probe(struct platform_device *pdev) } udc->isp1301_i2c_client = isp1301_get_client(isp1301_node); - if (!udc->isp1301_i2c_client) - return -EPROBE_DEFER; + if (!udc->isp1301_i2c_client) { + retval = -EPROBE_DEFER; + goto phy_fail; + } dev_info(udc->dev, "ISP1301 I2C device at address 0x%x\n", udc->isp1301_i2c_client->addr); @@ -3160,8 +3124,10 @@ static int __init lpc32xx_udc_probe(struct platform_device *pdev) * IORESOURCE_IRQ, USB transceiver interrupt number */ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) - return -ENXIO; + if (!res) { + retval = -ENXIO; + goto resource_fail; + } spin_lock_init(&udc->lock); @@ -3171,7 +3137,8 @@ static int __init lpc32xx_udc_probe(struct platform_device *pdev) if (udc->udp_irq[i] < 0) { dev_err(udc->dev, "irq resource %d not available!\n", i); - return udc->udp_irq[i]; + retval = udc->udp_irq[i]; + goto irq_fail; } } @@ -3179,7 +3146,8 @@ static int __init lpc32xx_udc_probe(struct platform_device *pdev) udc->io_p_size = resource_size(res); if (!request_mem_region(udc->io_p_start, udc->io_p_size, driver_name)) { dev_err(udc->dev, "someone's using UDC memory\n"); - return -EBUSY; + retval = -EBUSY; + goto request_mem_region_fail; } udc->udp_baseaddr = ioremap(udc->io_p_start, udc->io_p_size); @@ -3208,7 +3176,7 @@ static int __init lpc32xx_udc_probe(struct platform_device *pdev) udc->usb_otg_clk = clk_get(&pdev->dev, "ck_usb_otg"); if (IS_ERR(udc->usb_otg_clk)) { dev_err(udc->dev, "failed to acquire USB otg clock\n"); - retval = PTR_ERR(udc->usb_slv_clk); + retval = PTR_ERR(udc->usb_otg_clk); goto usb_otg_clk_get_fail; } @@ -3376,7 +3344,11 @@ pll_get_fail: io_map_fail: release_mem_region(udc->io_p_start, udc->io_p_size); dev_err(udc->dev, "%s probe failed, %d\n", driver_name, retval); - +request_mem_region_fail: +irq_fail: +resource_fail: +phy_fail: + kfree(udc); return retval; } @@ -3414,6 +3386,7 @@ static int __devexit lpc32xx_udc_remove(struct platform_device *pdev) clk_put(udc->usb_pll_clk); iounmap(udc->udp_baseaddr); release_mem_region(udc->io_p_start, udc->io_p_size); + kfree(udc); return 0; } diff --git a/drivers/usb/gadget/m66592-udc.c b/drivers/usb/gadget/m66592-udc.c index cf6bd626f3fe..b6401f1b56ce 100644 --- a/drivers/usb/gadget/m66592-udc.c +++ b/drivers/usb/gadget/m66592-udc.c @@ -1466,7 +1466,7 @@ static struct usb_ep_ops m66592_ep_ops = { static struct m66592 *the_controller; static int m66592_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)) + int (*bind)(struct usb_gadget *, struct usb_gadget_driver *)) { struct m66592 *m66592 = the_controller; int retval; @@ -1492,7 +1492,7 @@ static int m66592_start(struct usb_gadget_driver *driver, goto error; } - retval = bind(&m66592->gadget); + retval = bind(&m66592->gadget, driver); if (retval) { pr_err("bind to driver error (%d)\n", retval); device_del(&m66592->gadget.dev); diff --git a/drivers/usb/gadget/mass_storage.c b/drivers/usb/gadget/mass_storage.c index 1f376eba31f6..080e577773d5 100644 --- a/drivers/usb/gadget/mass_storage.c +++ b/drivers/usb/gadget/mass_storage.c @@ -29,9 +29,8 @@ #include <linux/kernel.h> -#include <linux/utsname.h> #include <linux/usb/ch9.h> - +#include <linux/module.h> /*-------------------------------------------------------------------------*/ @@ -47,14 +46,10 @@ * the runtime footprint, and giving us at least some parts of what * a "gcc --combine ... part1.c part2.c part3.c ... " build would. */ - -#include "composite.c" -#include "usbstring.c" -#include "config.c" -#include "epautoconf.c" #include "f_mass_storage.c" /*-------------------------------------------------------------------------*/ +USB_GADGET_COMPOSITE_OPTIONS(); static struct usb_device_descriptor msg_device_desc = { .bLength = sizeof msg_device_desc, @@ -85,6 +80,22 @@ static const struct usb_descriptor_header *otg_desc[] = { NULL, }; +static struct usb_string strings_dev[] = { + [USB_GADGET_MANUFACTURER_IDX].s = "", + [USB_GADGET_PRODUCT_IDX].s = DRIVER_DESC, + [USB_GADGET_SERIAL_IDX].s = "", + { } /* end of list */ +}; + +static struct usb_gadget_strings stringtab_dev = { + .language = 0x0409, /* en-us */ + .strings = strings_dev, +}; + +static struct usb_gadget_strings *dev_strings[] = { + &stringtab_dev, + NULL, +}; /****************************** Configurations ******************************/ @@ -143,10 +154,15 @@ static int __init msg_bind(struct usb_composite_dev *cdev) { int status; - status = usb_add_config(cdev, &msg_config_driver, msg_do_config); + status = usb_string_ids_tab(cdev, strings_dev); if (status < 0) return status; + msg_device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id; + status = usb_add_config(cdev, &msg_config_driver, msg_do_config); + if (status < 0) + return status; + usb_composite_overwrite_options(cdev, &coverwrite); dev_info(&cdev->gadget->dev, DRIVER_DESC ", version: " DRIVER_VERSION "\n"); set_bit(0, &msg_registered); @@ -156,12 +172,13 @@ static int __init msg_bind(struct usb_composite_dev *cdev) /****************************** Some noise ******************************/ -static struct usb_composite_driver msg_driver = { +static __refdata struct usb_composite_driver msg_driver = { .name = "g_mass_storage", .dev = &msg_device_desc, - .iProduct = DRIVER_DESC, .max_speed = USB_SPEED_SUPER, .needs_serial = 1, + .strings = dev_strings, + .bind = msg_bind, }; MODULE_DESCRIPTION(DRIVER_DESC); @@ -170,7 +187,7 @@ MODULE_LICENSE("GPL"); static int __init msg_init(void) { - return usb_composite_probe(&msg_driver, msg_bind); + return usb_composite_probe(&msg_driver); } module_init(msg_init); diff --git a/drivers/usb/gadget/multi.c b/drivers/usb/gadget/multi.c index c37fb33a3d1b..88472bf7dbb7 100644 --- a/drivers/usb/gadget/multi.c +++ b/drivers/usb/gadget/multi.c @@ -14,10 +14,8 @@ #include <linux/kernel.h> -#include <linux/utsname.h> #include <linux/module.h> - #if defined USB_ETH_RNDIS # undef USB_ETH_RNDIS #endif @@ -42,12 +40,6 @@ MODULE_LICENSE("GPL"); * the runtime footprint, and giving us at least some parts of what * a "gcc --combine ... part1.c part2.c part3.c ... " build would. */ - -#include "composite.c" -#include "usbstring.c" -#include "config.c" -#include "epautoconf.c" - #include "f_mass_storage.c" #include "u_serial.c" @@ -61,7 +53,7 @@ MODULE_LICENSE("GPL"); #endif #include "u_ether.c" - +USB_GADGET_COMPOSITE_OPTIONS(); /***************************** Device Descriptor ****************************/ @@ -112,21 +104,16 @@ static const struct usb_descriptor_header *otg_desc[] = { enum { -#ifdef CONFIG_USB_G_MULTI_RNDIS - MULTI_STRING_RNDIS_CONFIG_IDX, -#endif -#ifdef CONFIG_USB_G_MULTI_CDC + MULTI_STRING_RNDIS_CONFIG_IDX = USB_GADGET_FIRST_AVAIL_IDX, MULTI_STRING_CDC_CONFIG_IDX, -#endif }; static struct usb_string strings_dev[] = { -#ifdef CONFIG_USB_G_MULTI_RNDIS + [USB_GADGET_MANUFACTURER_IDX].s = "", + [USB_GADGET_PRODUCT_IDX].s = DRIVER_DESC, + [USB_GADGET_SERIAL_IDX].s = "", [MULTI_STRING_RNDIS_CONFIG_IDX].s = "Multifunction with RNDIS", -#endif -#ifdef CONFIG_USB_G_MULTI_CDC [MULTI_STRING_CDC_CONFIG_IDX].s = "Multifunction with CDC ECM", -#endif { } /* end of list */ }; @@ -260,7 +247,7 @@ static int cdc_config_register(struct usb_composite_dev *cdev) static int __ref multi_bind(struct usb_composite_dev *cdev) { struct usb_gadget *gadget = cdev->gadget; - int status, gcnum; + int status; if (!can_support_ecm(cdev->gadget)) { dev_err(&gadget->dev, "controller '%s' not usable\n", @@ -288,19 +275,11 @@ static int __ref multi_bind(struct usb_composite_dev *cdev) } } - /* set bcdDevice */ - gcnum = usb_gadget_controller_number(gadget); - if (gcnum >= 0) { - device_desc.bcdDevice = cpu_to_le16(0x0300 | gcnum); - } else { - WARNING(cdev, "controller '%s' not recognized\n", gadget->name); - device_desc.bcdDevice = cpu_to_le16(0x0300 | 0x0099); - } - /* allocate string IDs */ status = usb_string_ids_tab(cdev, strings_dev); if (unlikely(status < 0)) goto fail2; + device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id; /* register configurations */ status = rndis_config_register(cdev); @@ -310,6 +289,7 @@ static int __ref multi_bind(struct usb_composite_dev *cdev) status = cdc_config_register(cdev); if (unlikely(status < 0)) goto fail2; + usb_composite_overwrite_options(cdev, &coverwrite); /* we're done */ dev_info(&gadget->dev, DRIVER_DESC "\n"); @@ -338,20 +318,20 @@ static int __exit multi_unbind(struct usb_composite_dev *cdev) /****************************** Some noise ******************************/ -static struct usb_composite_driver multi_driver = { +static __refdata struct usb_composite_driver multi_driver = { .name = "g_multi", .dev = &device_desc, .strings = dev_strings, .max_speed = USB_SPEED_HIGH, + .bind = multi_bind, .unbind = __exit_p(multi_unbind), - .iProduct = DRIVER_DESC, .needs_serial = 1, }; static int __init multi_init(void) { - return usb_composite_probe(&multi_driver, multi_bind); + return usb_composite_probe(&multi_driver); } module_init(multi_init); diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c index 75db2c306cea..ea45224f78c8 100644 --- a/drivers/usb/gadget/mv_udc_core.c +++ b/drivers/usb/gadget/mv_udc_core.c @@ -51,9 +51,8 @@ #define EPSTATUS_TIMEOUT 10000 #define PRIME_TIMEOUT 10000 #define READSAFE_TIMEOUT 1000 -#define DTD_TIMEOUT 1000 -#define LOOPS_USEC_SHIFT 4 +#define LOOPS_USEC_SHIFT 1 #define LOOPS_USEC (1 << LOOPS_USEC_SHIFT) #define LOOPS(timeout) ((timeout) >> LOOPS_USEC_SHIFT) @@ -64,7 +63,6 @@ static const char driver_desc[] = DRIVER_DESC; /* controller device global variable */ static struct mv_udc *the_controller; -int mv_usb_otgsc; static void nuke(struct mv_ep *ep, int status); static void stop_activity(struct mv_udc *udc, struct usb_gadget_driver *driver); @@ -357,17 +355,24 @@ done: return retval; } - static struct mv_dtd *build_dtd(struct mv_req *req, unsigned *length, dma_addr_t *dma, int *is_last) { - u32 temp; struct mv_dtd *dtd; struct mv_udc *udc; + struct mv_dqh *dqh; + u32 temp, mult = 0; /* how big will this transfer be? */ - *length = min(req->req.length - req->req.actual, - (unsigned)EP_MAX_LENGTH_TRANSFER); + if (usb_endpoint_xfer_isoc(req->ep->ep.desc)) { + dqh = req->ep->dqh; + mult = (dqh->max_packet_length >> EP_QUEUE_HEAD_MULT_POS) + & 0x3; + *length = min(req->req.length - req->req.actual, + (unsigned)(mult * req->ep->ep.maxpacket)); + } else + *length = min(req->req.length - req->req.actual, + (unsigned)EP_MAX_LENGTH_TRANSFER); udc = req->ep->udc; @@ -375,7 +380,7 @@ static struct mv_dtd *build_dtd(struct mv_req *req, unsigned *length, * Be careful that no _GFP_HIGHMEM is set, * or we can not use dma_to_virt */ - dtd = dma_pool_alloc(udc->dtd_pool, GFP_KERNEL, dma); + dtd = dma_pool_alloc(udc->dtd_pool, GFP_ATOMIC, dma); if (dtd == NULL) return dtd; @@ -409,6 +414,8 @@ static struct mv_dtd *build_dtd(struct mv_req *req, unsigned *length, if (*is_last && !req->req.no_interrupt) temp |= DTD_IOC; + temp |= mult << 10; + dtd->size_ioc_sts = temp; mb(); @@ -708,6 +715,7 @@ mv_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) struct mv_req *req = container_of(_req, struct mv_req, req); struct mv_udc *udc = ep->udc; unsigned long flags; + int retval; /* catch various bogus parameters */ if (!_req || !req->req.complete || !req->req.buf @@ -719,10 +727,6 @@ mv_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) dev_err(&udc->dev->dev, "%s, bad ep", __func__); return -EINVAL; } - if (ep->ep.desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) { - if (req->req.length > ep->ep.maxpacket) - return -EMSGSIZE; - } udc = ep->udc; if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN) @@ -755,15 +759,17 @@ mv_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) /* build dtds and push them to device queue */ if (!req_to_dtd(req)) { - int retval; retval = queue_dtd(ep, req); if (retval) { spin_unlock_irqrestore(&udc->lock, flags); - return retval; + dev_err(&udc->dev->dev, "Failed to queue dtd\n"); + goto err_unmap_dma; } } else { spin_unlock_irqrestore(&udc->lock, flags); - return -ENOMEM; + dev_err(&udc->dev->dev, "Failed to dma_pool_alloc\n"); + retval = -ENOMEM; + goto err_unmap_dma; } /* Update ep0 state */ @@ -775,6 +781,22 @@ mv_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) spin_unlock_irqrestore(&udc->lock, flags); return 0; + +err_unmap_dma: + if (req->mapped) { + dma_unmap_single(ep->udc->gadget.dev.parent, + req->req.dma, req->req.length, + ((ep_dir(ep) == EP_DIR_IN) ? + DMA_TO_DEVICE : DMA_FROM_DEVICE)); + req->req.dma = DMA_ADDR_INVALID; + req->mapped = 0; + } else + dma_sync_single_for_cpu(ep->udc->gadget.dev.parent, + req->req.dma, req->req.length, + ((ep_dir(ep) == EP_DIR_IN) ? + DMA_TO_DEVICE : DMA_FROM_DEVICE)); + + return retval; } static void mv_prime_ep(struct mv_ep *ep, struct mv_req *req) @@ -1065,7 +1087,7 @@ static int udc_reset(struct mv_udc *udc) tmp |= USBMODE_CTRL_MODE_DEVICE; /* turn setup lockout off, require setup tripwire in usbcmd */ - tmp |= USBMODE_SETUP_LOCK_OFF | USBMODE_STREAM_DISABLE; + tmp |= USBMODE_SETUP_LOCK_OFF; writel(tmp, &udc->op_regs->usbmode); @@ -1199,12 +1221,16 @@ static int mv_udc_vbus_session(struct usb_gadget *gadget, int is_active) udc_start(udc); } } else if (udc->driver && udc->softconnect) { + if (!udc->active) + goto out; + /* stop all the transfer in queue*/ stop_activity(udc, udc->driver); udc_stop(udc); mv_udc_disable(udc); } +out: spin_unlock_irqrestore(&udc->lock, flags); return retval; } @@ -1243,7 +1269,7 @@ static int mv_udc_pullup(struct usb_gadget *gadget, int is_on) } static int mv_udc_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)); + int (*bind)(struct usb_gadget *, struct usb_gadget_driver *)); static int mv_udc_stop(struct usb_gadget_driver *driver); /* device controller usb_gadget_ops structure */ static const struct usb_gadget_ops mv_ops = { @@ -1348,7 +1374,7 @@ static void stop_activity(struct mv_udc *udc, struct usb_gadget_driver *driver) } static int mv_udc_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)) + int (*bind)(struct usb_gadget *, struct usb_gadget_driver *)) { struct mv_udc *udc = the_controller; int retval = 0; @@ -1373,7 +1399,7 @@ static int mv_udc_start(struct usb_gadget_driver *driver, spin_unlock_irqrestore(&udc->lock, flags); - retval = bind(&udc->gadget); + retval = bind(&udc->gadget, driver); if (retval) { dev_err(&udc->dev->dev, "bind to driver %s --> %d\n", driver->driver.name, retval); @@ -1499,15 +1525,17 @@ udc_prime_status(struct mv_udc *udc, u8 direction, u16 status, bool empty) } /* prime the data phase */ - if (!req_to_dtd(req)) + if (!req_to_dtd(req)) { retval = queue_dtd(ep, req); - else{ /* no mem */ + if (retval) { + dev_err(&udc->dev->dev, + "Failed to queue dtd when prime status\n"); + goto out; + } + } else{ /* no mem */ retval = -ENOMEM; - goto out; - } - - if (retval) { - dev_err(&udc->dev->dev, "response error on GET_STATUS request\n"); + dev_err(&udc->dev->dev, + "Failed to dma_pool_alloc when prime status\n"); goto out; } @@ -1515,6 +1543,15 @@ udc_prime_status(struct mv_udc *udc, u8 direction, u16 status, bool empty) return 0; out: + if (req->mapped) { + dma_unmap_single(ep->udc->gadget.dev.parent, + req->req.dma, req->req.length, + ((ep_dir(ep) == EP_DIR_IN) ? + DMA_TO_DEVICE : DMA_FROM_DEVICE)); + req->req.dma = DMA_ADDR_INVALID; + req->mapped = 0; + } + return retval; } @@ -2468,9 +2505,11 @@ static void mv_udc_shutdown(struct platform_device *dev) u32 mode; /* reset controller mode to IDLE */ + mv_udc_enable(udc); mode = readl(&udc->op_regs->usbmode); mode &= ~3; writel(mode, &udc->op_regs->usbmode); + mv_udc_disable(udc); } static struct platform_driver udc_driver = { diff --git a/drivers/usb/gadget/ncm.c b/drivers/usb/gadget/ncm.c index 89530034dff1..a22ad9af0565 100644 --- a/drivers/usb/gadget/ncm.c +++ b/drivers/usb/gadget/ncm.c @@ -20,8 +20,8 @@ /* #define VERBOSE_DEBUG */ #include <linux/kernel.h> -#include <linux/utsname.h> - +#include <linux/module.h> +#include <linux/usb/composite.h> #include "u_ether.h" @@ -36,11 +36,6 @@ * the runtime footprint, and giving us at least some parts of what * a "gcc --combine ... part1.c part2.c part3.c ... " build would. */ -#include "composite.c" -#include "usbstring.c" -#include "config.c" -#include "epautoconf.c" - #include "f_ncm.c" #include "u_ether.c" @@ -57,6 +52,7 @@ #define CDC_PRODUCT_NUM 0xa4a1 /* Linux-USB Ethernet Gadget */ /*-------------------------------------------------------------------------*/ +USB_GADGET_COMPOSITE_OPTIONS(); static struct usb_device_descriptor device_desc = { .bLength = sizeof device_desc, @@ -97,17 +93,11 @@ static const struct usb_descriptor_header *otg_desc[] = { NULL, }; - /* string IDs are assigned dynamically */ - -#define STRING_MANUFACTURER_IDX 0 -#define STRING_PRODUCT_IDX 1 - -static char manufacturer[50]; - static struct usb_string strings_dev[] = { - [STRING_MANUFACTURER_IDX].s = manufacturer, - [STRING_PRODUCT_IDX].s = DRIVER_DESC, + [USB_GADGET_MANUFACTURER_IDX].s = "", + [USB_GADGET_PRODUCT_IDX].s = DRIVER_DESC, + [USB_GADGET_SERIAL_IDX].s = "", { } /* end of list */ }; @@ -149,7 +139,6 @@ static struct usb_configuration ncm_config_driver = { static int __init gncm_bind(struct usb_composite_dev *cdev) { - int gcnum; struct usb_gadget *gadget = cdev->gadget; int status; @@ -158,48 +147,22 @@ static int __init gncm_bind(struct usb_composite_dev *cdev) if (status < 0) return status; - gcnum = usb_gadget_controller_number(gadget); - if (gcnum >= 0) - device_desc.bcdDevice = cpu_to_le16(0x0300 | gcnum); - else { - /* We assume that can_support_ecm() tells the truth; - * but if the controller isn't recognized at all then - * that assumption is a bit more likely to be wrong. - */ - dev_warn(&gadget->dev, - "controller '%s' not recognized; trying %s\n", - gadget->name, - ncm_config_driver.label); - device_desc.bcdDevice = - cpu_to_le16(0x0300 | 0x0099); - } - - /* Allocate string descriptor numbers ... note that string * contents can be overridden by the composite_dev glue. */ - /* device descriptor strings: manufacturer, product */ - snprintf(manufacturer, sizeof manufacturer, "%s %s with %s", - init_utsname()->sysname, init_utsname()->release, - gadget->name); - status = usb_string_id(cdev); - if (status < 0) - goto fail; - strings_dev[STRING_MANUFACTURER_IDX].id = status; - device_desc.iManufacturer = status; - - status = usb_string_id(cdev); + status = usb_string_ids_tab(cdev, strings_dev); if (status < 0) goto fail; - strings_dev[STRING_PRODUCT_IDX].id = status; - device_desc.iProduct = status; + device_desc.iManufacturer = strings_dev[USB_GADGET_MANUFACTURER_IDX].id; + device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id; status = usb_add_config(cdev, &ncm_config_driver, ncm_do_config); if (status < 0) goto fail; + usb_composite_overwrite_options(cdev, &coverwrite); dev_info(&gadget->dev, "%s\n", DRIVER_DESC); return 0; @@ -215,11 +178,12 @@ static int __exit gncm_unbind(struct usb_composite_dev *cdev) return 0; } -static struct usb_composite_driver ncm_driver = { +static __refdata struct usb_composite_driver ncm_driver = { .name = "g_ncm", .dev = &device_desc, .strings = dev_strings, .max_speed = USB_SPEED_HIGH, + .bind = gncm_bind, .unbind = __exit_p(gncm_unbind), }; @@ -229,7 +193,7 @@ MODULE_LICENSE("GPL"); static int __init init(void) { - return usb_composite_probe(&ncm_driver, gncm_bind); + return usb_composite_probe(&ncm_driver); } module_init(init); diff --git a/drivers/usb/gadget/nokia.c b/drivers/usb/gadget/nokia.c index c7fb7723c014..661600abace8 100644 --- a/drivers/usb/gadget/nokia.c +++ b/drivers/usb/gadget/nokia.c @@ -16,7 +16,6 @@ */ #include <linux/kernel.h> -#include <linux/utsname.h> #include <linux/device.h> #include "u_serial.h" @@ -38,11 +37,6 @@ * the runtime footprint, and giving us at least some parts of what * a "gcc --combine ... part1.c part2.c part3.c ... " build would. */ -#include "composite.c" -#include "usbstring.c" -#include "config.c" -#include "epautoconf.c" - #include "u_serial.c" #include "f_acm.c" #include "f_ecm.c" @@ -52,23 +46,23 @@ #include "u_ether.c" /*-------------------------------------------------------------------------*/ +USB_GADGET_COMPOSITE_OPTIONS(); #define NOKIA_VENDOR_ID 0x0421 /* Nokia */ #define NOKIA_PRODUCT_ID 0x01c8 /* Nokia Gadget */ /* string IDs are assigned dynamically */ -#define STRING_MANUFACTURER_IDX 0 -#define STRING_PRODUCT_IDX 1 -#define STRING_DESCRIPTION_IDX 2 +#define STRING_DESCRIPTION_IDX USB_GADGET_FIRST_AVAIL_IDX static char manufacturer_nokia[] = "Nokia"; static const char product_nokia[] = NOKIA_LONG_NAME; static const char description_nokia[] = "PC-Suite Configuration"; static struct usb_string strings_dev[] = { - [STRING_MANUFACTURER_IDX].s = manufacturer_nokia, - [STRING_PRODUCT_IDX].s = NOKIA_LONG_NAME, + [USB_GADGET_MANUFACTURER_IDX].s = manufacturer_nokia, + [USB_GADGET_PRODUCT_IDX].s = NOKIA_LONG_NAME, + [USB_GADGET_SERIAL_IDX].s = "", [STRING_DESCRIPTION_IDX].s = description_nokia, { } /* end of list */ }; @@ -90,6 +84,7 @@ static struct usb_device_descriptor device_desc = { .bDeviceClass = USB_CLASS_COMM, .idVendor = __constant_cpu_to_le16(NOKIA_VENDOR_ID), .idProduct = __constant_cpu_to_le16(NOKIA_PRODUCT_ID), + .bcdDevice = cpu_to_le16(NOKIA_VERSION_NUM), /* .iManufacturer = DYNAMIC */ /* .iProduct = DYNAMIC */ .bNumConfigurations = 1, @@ -151,7 +146,6 @@ static struct usb_configuration nokia_config_100ma_driver = { static int __init nokia_bind(struct usb_composite_dev *cdev) { - int gcnum; struct usb_gadget *gadget = cdev->gadget; int status; @@ -167,41 +161,17 @@ static int __init nokia_bind(struct usb_composite_dev *cdev) if (status < 0) goto err_ether; - status = usb_string_id(cdev); - if (status < 0) - goto err_usb; - strings_dev[STRING_MANUFACTURER_IDX].id = status; - - device_desc.iManufacturer = status; - - status = usb_string_id(cdev); + status = usb_string_ids_tab(cdev, strings_dev); if (status < 0) goto err_usb; - strings_dev[STRING_PRODUCT_IDX].id = status; - - device_desc.iProduct = status; - - /* config description */ - status = usb_string_id(cdev); - if (status < 0) - goto err_usb; - strings_dev[STRING_DESCRIPTION_IDX].id = status; - + device_desc.iManufacturer = strings_dev[USB_GADGET_MANUFACTURER_IDX].id; + device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id; + status = strings_dev[STRING_DESCRIPTION_IDX].id; nokia_config_500ma_driver.iConfiguration = status; nokia_config_100ma_driver.iConfiguration = status; - /* set up other descriptors */ - gcnum = usb_gadget_controller_number(gadget); - if (gcnum >= 0) - device_desc.bcdDevice = cpu_to_le16(NOKIA_VERSION_NUM); - else { - /* this should only work with hw that supports altsettings - * and several endpoints, anything else, panic. - */ - pr_err("nokia_bind: controller '%s' not recognized\n", - gadget->name); + if (!gadget_supports_altsettings(gadget)) goto err_usb; - } /* finally register the configuration */ status = usb_add_config(cdev, &nokia_config_500ma_driver, @@ -214,6 +184,7 @@ static int __init nokia_bind(struct usb_composite_dev *cdev) if (status < 0) goto err_usb; + usb_composite_overwrite_options(cdev, &coverwrite); dev_info(&gadget->dev, "%s\n", NOKIA_LONG_NAME); return 0; @@ -237,17 +208,18 @@ static int __exit nokia_unbind(struct usb_composite_dev *cdev) return 0; } -static struct usb_composite_driver nokia_driver = { +static __refdata struct usb_composite_driver nokia_driver = { .name = "g_nokia", .dev = &device_desc, .strings = dev_strings, .max_speed = USB_SPEED_HIGH, + .bind = nokia_bind, .unbind = __exit_p(nokia_unbind), }; static int __init nokia_init(void) { - return usb_composite_probe(&nokia_driver, nokia_bind); + return usb_composite_probe(&nokia_driver); } module_init(nokia_init); diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c index f9132ada53b5..2a4749c3eb3f 100644 --- a/drivers/usb/gadget/omap_udc.c +++ b/drivers/usb/gadget/omap_udc.c @@ -1308,7 +1308,7 @@ static int omap_pullup(struct usb_gadget *gadget, int is_on) } static int omap_udc_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)); + int (*bind)(struct usb_gadget *, struct usb_gadget_driver *)); static int omap_udc_stop(struct usb_gadget_driver *driver); static struct usb_gadget_ops omap_gadget_ops = { @@ -2040,7 +2040,7 @@ static inline int machine_without_vbus_sense(void) } static int omap_udc_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)) + int (*bind)(struct usb_gadget *, struct usb_gadget_driver *)) { int status = -ENODEV; struct omap_ep *ep; @@ -2082,7 +2082,7 @@ static int omap_udc_start(struct usb_gadget_driver *driver, if (udc->dc_clk != NULL) omap_udc_enable_clock(1); - status = bind(&udc->gadget); + status = bind(&udc->gadget, driver); if (status) { DBG("bind to %s --> %d\n", driver->driver.name, status); udc->gadget.dev.driver = NULL; diff --git a/drivers/usb/gadget/pch_udc.c b/drivers/usb/gadget/pch_udc.c index f4fb71c9ae08..6490c0040e3a 100644 --- a/drivers/usb/gadget/pch_udc.c +++ b/drivers/usb/gadget/pch_udc.c @@ -1236,7 +1236,7 @@ static int pch_udc_pcd_vbus_draw(struct usb_gadget *gadget, unsigned int mA) } static int pch_udc_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)); + int (*bind)(struct usb_gadget *, struct usb_gadget_driver *)); static int pch_udc_stop(struct usb_gadget_driver *driver); static const struct usb_gadget_ops pch_udc_ops = { .get_frame = pch_udc_pcd_get_frame, @@ -2982,7 +2982,7 @@ static int init_dma_pools(struct pch_udc_dev *dev) } static int pch_udc_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)) + int (*bind)(struct usb_gadget *, struct usb_gadget_driver *)) { struct pch_udc_dev *dev = pch_udc; int retval; @@ -3006,7 +3006,7 @@ static int pch_udc_start(struct usb_gadget_driver *driver, dev->gadget.dev.driver = &driver->driver; /* Invoke the bind routine of the gadget driver */ - retval = bind(&dev->gadget); + retval = bind(&dev->gadget, driver); if (retval) { dev_err(&dev->pdev->dev, "%s: binding to %s returning %d\n", diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c index f1f9290a2f47..e156e3f26727 100644 --- a/drivers/usb/gadget/printer.c +++ b/drivers/usb/gadget/printer.c @@ -22,7 +22,6 @@ #include <linux/timer.h> #include <linux/list.h> #include <linux/interrupt.h> -#include <linux/utsname.h> #include <linux/device.h> #include <linux/moduleparam.h> #include <linux/fs.h> @@ -38,25 +37,13 @@ #include <asm/unaligned.h> #include <linux/usb/ch9.h> +#include <linux/usb/composite.h> #include <linux/usb/gadget.h> #include <linux/usb/g_printer.h> #include "gadget_chips.h" - -/* - * Kbuild is not very cooperative with respect to linking separately - * compiled library objects into one module. So for now we won't use - * separate compilation ... ensuring init/exit sections work to shrink - * the runtime footprint, and giving us at least some parts of what - * a "gcc --combine ... part1.c part2.c part3.c ... " build would. - */ -#include "composite.c" -#include "usbstring.c" -#include "config.c" -#include "epautoconf.c" - -/*-------------------------------------------------------------------------*/ +USB_GADGET_COMPOSITE_OPTIONS(); #define DRIVER_DESC "Printer Gadget" #define DRIVER_VERSION "2007 OCT 06" @@ -120,8 +107,7 @@ static struct printer_dev usb_printer_gadget; * parameters are in UTF-8 (superset of ASCII's 7 bit characters). */ -static char *iSerialNum; -module_param(iSerialNum, charp, S_IRUGO); +module_param_named(iSerialNum, coverwrite.serial_number, charp, S_IRUGO); MODULE_PARM_DESC(iSerialNum, "1"); static char *iPNPstring; @@ -141,18 +127,10 @@ module_param(qlen, uint, S_IRUGO|S_IWUSR); * descriptors are built on demand. */ -#define STRING_MANUFACTURER 1 -#define STRING_PRODUCT 2 -#define STRING_SERIALNUM 3 - /* holds our biggest descriptor */ #define USB_DESC_BUFSIZE 256 #define USB_BUFSIZE 8192 -/* This device advertises one configuration. */ -#define DEV_CONFIG_VALUE 1 -#define PRINTER_INTERFACE 0 - static struct usb_device_descriptor device_desc = { .bLength = sizeof device_desc, .bDescriptorType = USB_DT_DEVICE, @@ -162,16 +140,12 @@ static struct usb_device_descriptor device_desc = { .bDeviceProtocol = 0, .idVendor = cpu_to_le16(PRINTER_VENDOR_NUM), .idProduct = cpu_to_le16(PRINTER_PRODUCT_NUM), - .iManufacturer = STRING_MANUFACTURER, - .iProduct = STRING_PRODUCT, - .iSerialNumber = STRING_SERIALNUM, .bNumConfigurations = 1 }; static struct usb_interface_descriptor intf_desc = { .bLength = sizeof intf_desc, .bDescriptorType = USB_DT_INTERFACE, - .bInterfaceNumber = PRINTER_INTERFACE, .bNumEndpoints = 2, .bInterfaceClass = USB_CLASS_PRINTER, .bInterfaceSubClass = 1, /* Printer Sub-Class */ @@ -252,7 +226,6 @@ static const struct usb_descriptor_header *otg_desc[] = { /* descriptors that are built on-demand */ -static char manufacturer [50]; static char product_desc [40] = DRIVER_DESC; static char serial_num [40] = "1"; static char pnp_string [1024] = @@ -260,9 +233,9 @@ static char pnp_string [1024] = /* static strings, in UTF-8 */ static struct usb_string strings [] = { - { STRING_MANUFACTURER, manufacturer, }, - { STRING_PRODUCT, product_desc, }, - { STRING_SERIALNUM, serial_num, }, + [USB_GADGET_MANUFACTURER_IDX].s = "", + [USB_GADGET_PRODUCT_IDX].s = product_desc, + [USB_GADGET_SERIAL_IDX].s = serial_num, { } /* end of list */ }; @@ -871,25 +844,13 @@ static int set_interface(struct printer_dev *dev, unsigned number) int result = 0; /* Free the current interface */ - switch (dev->interface) { - case PRINTER_INTERFACE: - printer_reset_interface(dev); - break; - } + printer_reset_interface(dev); - switch (number) { - case PRINTER_INTERFACE: - result = set_printer_interface(dev); - if (result) { - printer_reset_interface(dev); - } else { - dev->interface = PRINTER_INTERFACE; - } - break; - default: - result = -EINVAL; - /* FALL THROUGH */ - } + result = set_printer_interface(dev); + if (result) + printer_reset_interface(dev); + else + dev->interface = number; if (!result) INFO(dev, "Using interface %x\n", number); @@ -972,7 +933,7 @@ static int printer_func_setup(struct usb_function *f, switch (ctrl->bRequest) { case 0: /* Get the IEEE-1284 PNP String */ /* Only one printer interface is supported. */ - if ((wIndex>>8) != PRINTER_INTERFACE) + if ((wIndex>>8) != dev->interface) break; value = (pnp_string[0]<<8)|pnp_string[1]; @@ -983,7 +944,7 @@ static int printer_func_setup(struct usb_function *f, case 1: /* Get Port Status */ /* Only one printer interface is supported. */ - if (wIndex != PRINTER_INTERFACE) + if (wIndex != dev->interface) break; *(u8 *)req->buf = dev->printer_status; @@ -992,7 +953,7 @@ static int printer_func_setup(struct usb_function *f, case 2: /* Soft Reset */ /* Only one printer interface is supported. */ - if (wIndex != PRINTER_INTERFACE) + if (wIndex != dev->interface) break; printer_soft_reset(dev); @@ -1020,6 +981,37 @@ unknown: static int __init printer_func_bind(struct usb_configuration *c, struct usb_function *f) { + struct printer_dev *dev = container_of(f, struct printer_dev, function); + struct usb_composite_dev *cdev = c->cdev; + struct usb_ep *in_ep, *out_ep; + int id; + + id = usb_interface_id(c, f); + if (id < 0) + return id; + intf_desc.bInterfaceNumber = id; + + /* all we really need is bulk IN/OUT */ + in_ep = usb_ep_autoconfig(cdev->gadget, &fs_ep_in_desc); + if (!in_ep) { +autoconf_fail: + dev_err(&cdev->gadget->dev, "can't autoconfigure on %s\n", + cdev->gadget->name); + return -ENODEV; + } + in_ep->driver_data = in_ep; /* claim */ + + out_ep = usb_ep_autoconfig(cdev->gadget, &fs_ep_out_desc); + if (!out_ep) + goto autoconf_fail; + out_ep->driver_data = out_ep; /* claim */ + + /* assumes that all endpoints are dual-speed */ + hs_ep_in_desc.bEndpointAddress = fs_ep_in_desc.bEndpointAddress; + hs_ep_out_desc.bEndpointAddress = fs_ep_out_desc.bEndpointAddress; + + dev->in_ep = in_ep; + dev->out_ep = out_ep; return 0; } @@ -1035,7 +1027,8 @@ static int printer_func_set_alt(struct usb_function *f, int ret = -ENOTSUPP; if (!alt) - ret = set_interface(dev, PRINTER_INTERFACE); + ret = set_interface(dev, intf); + return ret; } @@ -1107,13 +1100,13 @@ static int __init printer_bind_config(struct usb_configuration *c) { struct usb_gadget *gadget = c->cdev->gadget; struct printer_dev *dev; - struct usb_ep *in_ep, *out_ep; int status = -ENOMEM; - int gcnum; size_t len; u32 i; struct usb_request *req; + usb_ep_autoconfig_reset(gadget); + dev = &usb_printer_gadget; dev->function.name = shortname; @@ -1125,6 +1118,10 @@ static int __init printer_bind_config(struct usb_configuration *c) dev->function.set_alt = printer_func_set_alt; dev->function.disable = printer_func_disable; + status = usb_add_function(c, &dev->function); + if (status) + return status; + /* Setup the sysfs files for the printer gadget. */ dev->pdev = device_create(usb_gadget_class, NULL, g_printer_devno, NULL, "g_printer"); @@ -1145,23 +1142,6 @@ static int __init printer_bind_config(struct usb_configuration *c) goto fail; } - gcnum = usb_gadget_controller_number(gadget); - if (gcnum >= 0) { - device_desc.bcdDevice = cpu_to_le16(0x0200 + gcnum); - } else { - dev_warn(&gadget->dev, "controller '%s' not recognized\n", - gadget->name); - /* unrecognized, but safe unless bulk is REALLY quirky */ - device_desc.bcdDevice = - cpu_to_le16(0xFFFF); - } - snprintf(manufacturer, sizeof(manufacturer), "%s %s with %s", - init_utsname()->sysname, init_utsname()->release, - gadget->name); - - if (iSerialNum) - strlcpy(serial_num, iSerialNum, sizeof serial_num); - if (iPNPstring) strlcpy(&pnp_string[2], iPNPstring, (sizeof pnp_string)-2); @@ -1169,26 +1149,6 @@ static int __init printer_bind_config(struct usb_configuration *c) pnp_string[0] = (len >> 8) & 0xFF; pnp_string[1] = len & 0xFF; - /* all we really need is bulk IN/OUT */ - usb_ep_autoconfig_reset(gadget); - in_ep = usb_ep_autoconfig(gadget, &fs_ep_in_desc); - if (!in_ep) { -autoconf_fail: - dev_err(&gadget->dev, "can't autoconfigure on %s\n", - gadget->name); - return -ENODEV; - } - in_ep->driver_data = in_ep; /* claim */ - - out_ep = usb_ep_autoconfig(gadget, &fs_ep_out_desc); - if (!out_ep) - goto autoconf_fail; - out_ep->driver_data = out_ep; /* claim */ - - /* assumes that all endpoints are dual-speed */ - hs_ep_in_desc.bEndpointAddress = fs_ep_in_desc.bEndpointAddress; - hs_ep_out_desc.bEndpointAddress = fs_ep_out_desc.bEndpointAddress; - usb_gadget_set_selfpowered(gadget); if (gadget->is_otg) { @@ -1215,9 +1175,6 @@ autoconf_fail: dev->current_rx_bytes = 0; dev->current_rx_buf = NULL; - dev->in_ep = in_ep; - dev->out_ep = out_ep; - for (i = 0; i < QLEN; i++) { req = printer_req_alloc(dev->in_ep, USB_BUFSIZE, GFP_KERNEL); if (!req) { @@ -1250,8 +1207,6 @@ autoconf_fail: dev->gadget = gadget; INFO(dev, "%s, version: " DRIVER_VERSION "\n", driver_desc); - INFO(dev, "using %s, OUT %s IN %s\n", gadget->name, out_ep->name, - in_ep->name); return 0; fail: @@ -1266,14 +1221,28 @@ static int printer_unbind(struct usb_composite_dev *cdev) static int __init printer_bind(struct usb_composite_dev *cdev) { - return usb_add_config(cdev, &printer_cfg_driver, printer_bind_config); + int ret; + + ret = usb_string_ids_tab(cdev, strings); + if (ret < 0) + return ret; + device_desc.iManufacturer = strings[USB_GADGET_MANUFACTURER_IDX].id; + device_desc.iProduct = strings[USB_GADGET_PRODUCT_IDX].id; + device_desc.iSerialNumber = strings[USB_GADGET_SERIAL_IDX].id; + + ret = usb_add_config(cdev, &printer_cfg_driver, printer_bind_config); + if (ret) + return ret; + usb_composite_overwrite_options(cdev, &coverwrite); + return ret; } -static struct usb_composite_driver printer_driver = { +static __refdata struct usb_composite_driver printer_driver = { .name = shortname, .dev = &device_desc, .strings = dev_strings, .max_speed = USB_SPEED_HIGH, + .bind = printer_bind, .unbind = printer_unbind, }; @@ -1297,7 +1266,7 @@ init(void) return status; } - status = usb_composite_probe(&printer_driver, printer_bind); + status = usb_composite_probe(&printer_driver); if (status) { class_destroy(usb_gadget_class); unregister_chrdev_region(g_printer_devno, 1); diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c index 907ad3ecb341..8efbf08c3561 100644 --- a/drivers/usb/gadget/pxa25x_udc.c +++ b/drivers/usb/gadget/pxa25x_udc.c @@ -33,7 +33,6 @@ #include <linux/dma-mapping.h> #include <linux/irq.h> #include <linux/clk.h> -#include <linux/err.h> #include <linux/seq_file.h> #include <linux/debugfs.h> #include <linux/io.h> @@ -1000,7 +999,7 @@ static int pxa25x_udc_vbus_draw(struct usb_gadget *_gadget, unsigned mA) } static int pxa25x_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)); + int (*bind)(struct usb_gadget *, struct usb_gadget_driver *)); static int pxa25x_stop(struct usb_gadget_driver *driver); static const struct usb_gadget_ops pxa25x_udc_ops = { @@ -1258,7 +1257,7 @@ static void udc_enable (struct pxa25x_udc *dev) * the driver might get unbound. */ static int pxa25x_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)) + int (*bind)(struct usb_gadget *, struct usb_gadget_driver *)) { struct pxa25x_udc *dev = the_controller; int retval; @@ -1286,7 +1285,7 @@ fail: dev->gadget.dev.driver = NULL; return retval; } - retval = bind(&dev->gadget); + retval = bind(&dev->gadget, driver); if (retval) { DMSG("bind to driver %s --> error %d\n", driver->driver.name, retval); diff --git a/drivers/usb/gadget/pxa25x_udc.h b/drivers/usb/gadget/pxa25x_udc.h index 861f4df6ea22..2eca1e71fecd 100644 --- a/drivers/usb/gadget/pxa25x_udc.h +++ b/drivers/usb/gadget/pxa25x_udc.h @@ -225,7 +225,7 @@ dump_state(struct pxa25x_udc *dev) dev->stats.read.bytes, dev->stats.read.ops); for (i = 1; i < PXA_UDC_NUM_ENDPOINTS; i++) { - if (dev->ep [i].desc == NULL) + if (dev->ep[i].ep.desc == NULL) continue; DMSG ("udccs%d = %02x\n", i, *dev->ep->reg_udccs); } diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c index 644b4305cb99..979ddaddb0f8 100644 --- a/drivers/usb/gadget/pxa27x_udc.c +++ b/drivers/usb/gadget/pxa27x_udc.c @@ -1672,7 +1672,7 @@ static int pxa_udc_vbus_draw(struct usb_gadget *_gadget, unsigned mA) } static int pxa27x_udc_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)); + int (*bind)(struct usb_gadget *, struct usb_gadget_driver *)); static int pxa27x_udc_stop(struct usb_gadget_driver *driver); static const struct usb_gadget_ops pxa_udc_ops = { @@ -1803,7 +1803,7 @@ static void udc_enable(struct pxa_udc *udc) * Returns 0 if no error, -EINVAL, -ENODEV, -EBUSY otherwise */ static int pxa27x_udc_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)) + int (*bind)(struct usb_gadget *, struct usb_gadget_driver *)) { struct pxa_udc *udc = the_controller; int retval; @@ -1826,7 +1826,7 @@ static int pxa27x_udc_start(struct usb_gadget_driver *driver, dev_err(udc->dev, "device_add error %d\n", retval); goto add_fail; } - retval = bind(&udc->gadget); + retval = bind(&udc->gadget, driver); if (retval) { dev_err(udc->dev, "bind to driver %s --> error %d\n", driver->driver.name, retval); diff --git a/drivers/usb/gadget/rndis.c b/drivers/usb/gadget/rndis.c index b35babed6fcb..e4192b887de9 100644 --- a/drivers/usb/gadget/rndis.c +++ b/drivers/usb/gadget/rndis.c @@ -863,26 +863,8 @@ int rndis_msg_parser(u8 configNr, u8 *buf) */ pr_warning("%s: unknown RNDIS message 0x%08X len %d\n", __func__, MsgType, MsgLength); - { - unsigned i; - for (i = 0; i < MsgLength; i += 16) { - pr_debug("%03d: " - " %02x %02x %02x %02x" - " %02x %02x %02x %02x" - " %02x %02x %02x %02x" - " %02x %02x %02x %02x" - "\n", - i, - buf[i], buf [i+1], - buf[i+2], buf[i+3], - buf[i+4], buf [i+5], - buf[i+6], buf[i+7], - buf[i+8], buf [i+9], - buf[i+10], buf[i+11], - buf[i+12], buf [i+13], - buf[i+14], buf[i+15]); - } - } + print_hex_dump_bytes(__func__, DUMP_PREFIX_OFFSET, + buf, MsgLength); break; } diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index 0bb617e1dda2..6f696ee8b817 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -2197,7 +2197,7 @@ static int s3c_hsotg_corereset(struct s3c_hsotg *hsotg) /* issue soft reset */ writel(GRSTCTL_CSftRst, hsotg->regs + GRSTCTL); - timeout = 1000; + timeout = 10000; do { grstctl = readl(hsotg->regs + GRSTCTL); } while ((grstctl & GRSTCTL_CSftRst) && timeout-- > 0); @@ -2207,7 +2207,7 @@ static int s3c_hsotg_corereset(struct s3c_hsotg *hsotg) return -EINVAL; } - timeout = 1000; + timeout = 10000; while (1) { u32 grstctl = readl(hsotg->regs + GRSTCTL); @@ -3516,7 +3516,7 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev) hsotg->dev = dev; hsotg->plat = plat; - hsotg->clk = clk_get(&pdev->dev, "otg"); + hsotg->clk = devm_clk_get(&pdev->dev, "otg"); if (IS_ERR(hsotg->clk)) { dev_err(dev, "cannot get otg clock\n"); return PTR_ERR(hsotg->clk); @@ -3667,7 +3667,6 @@ err_supplies: err_clk: clk_disable_unprepare(hsotg->clk); - clk_put(hsotg->clk); return ret; } @@ -3693,7 +3692,6 @@ static int __devexit s3c_hsotg_remove(struct platform_device *pdev) regulator_bulk_free(ARRAY_SIZE(hsotg->supplies), hsotg->supplies); clk_disable_unprepare(hsotg->clk); - clk_put(hsotg->clk); device_unregister(&hsotg->gadget.dev); return 0; diff --git a/drivers/usb/gadget/s3c-hsudc.c b/drivers/usb/gadget/s3c-hsudc.c index e26a4e7ed2bf..d8e785d4ad59 100644 --- a/drivers/usb/gadget/s3c-hsudc.c +++ b/drivers/usb/gadget/s3c-hsudc.c @@ -135,7 +135,6 @@ struct s3c_hsudc_req { * @dev: The device reference used by probe function. * @lock: Lock to synchronize the usage of Endpoints (EP's are indexed). * @regs: Remapped base address of controller's register space. - * @mem_rsrc: Device memory resource used for remapping device register space. * irq: IRQ number used by the controller. * uclk: Reference to the controller clock. * ep0state: Current state of EP0. @@ -150,7 +149,6 @@ struct s3c_hsudc { struct regulator_bulk_data supplies[ARRAY_SIZE(s3c_hsudc_supply_names)]; spinlock_t lock; void __iomem *regs; - struct resource *mem_rsrc; int irq; struct clk *uclk; int ep0state; @@ -835,9 +833,9 @@ static struct usb_request *s3c_hsudc_alloc_request(struct usb_ep *_ep, { struct s3c_hsudc_req *hsreq; - hsreq = kzalloc(sizeof *hsreq, gfp_flags); + hsreq = kzalloc(sizeof(*hsreq), gfp_flags); if (!hsreq) - return 0; + return NULL; INIT_LIST_HEAD(&hsreq->queue); return &hsreq->req; @@ -906,16 +904,16 @@ static int s3c_hsudc_queue(struct usb_ep *_ep, struct usb_request *_req, csr = readl((u32)hsudc->regs + offset); if (!(csr & S3C_ESR_TX_SUCCESS) && (s3c_hsudc_write_fifo(hsep, hsreq) == 1)) - hsreq = 0; + hsreq = NULL; } else { csr = readl((u32)hsudc->regs + offset); if ((csr & S3C_ESR_RX_SUCCESS) && (s3c_hsudc_read_fifo(hsep, hsreq) == 1)) - hsreq = 0; + hsreq = NULL; } } - if (hsreq != 0) + if (hsreq) list_add_tail(&hsreq->queue, &hsep->queue); spin_unlock_irqrestore(&hsudc->lock, flags); @@ -1271,7 +1269,7 @@ static int __devinit s3c_hsudc_probe(struct platform_device *pdev) struct s3c24xx_hsudc_platdata *pd = pdev->dev.platform_data; int ret, i; - hsudc = kzalloc(sizeof(struct s3c_hsudc) + + hsudc = devm_kzalloc(&pdev->dev, sizeof(struct s3c_hsudc) + sizeof(struct s3c_hsudc_ep) * pd->epnum, GFP_KERNEL); if (!hsudc) { @@ -1296,25 +1294,12 @@ static int __devinit s3c_hsudc_probe(struct platform_device *pdev) } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(dev, "unable to obtain driver resource data\n"); - ret = -ENODEV; - goto err_res; - } - - hsudc->mem_rsrc = request_mem_region(res->start, resource_size(res), - dev_name(&pdev->dev)); - if (!hsudc->mem_rsrc) { - dev_err(dev, "failed to reserve register area\n"); - ret = -ENODEV; - goto err_res; - } - hsudc->regs = ioremap(res->start, resource_size(res)); + hsudc->regs = devm_request_and_ioremap(&pdev->dev, res); if (!hsudc->regs) { dev_err(dev, "error mapping device register area\n"); ret = -EBUSY; - goto err_remap; + goto err_res; } spin_lock_init(&hsudc->lock); @@ -1337,21 +1322,22 @@ static int __devinit s3c_hsudc_probe(struct platform_device *pdev) ret = platform_get_irq(pdev, 0); if (ret < 0) { dev_err(dev, "unable to obtain IRQ number\n"); - goto err_irq; + goto err_res; } hsudc->irq = ret; - ret = request_irq(hsudc->irq, s3c_hsudc_irq, 0, driver_name, hsudc); + ret = devm_request_irq(&pdev->dev, hsudc->irq, s3c_hsudc_irq, 0, + driver_name, hsudc); if (ret < 0) { dev_err(dev, "irq request failed\n"); - goto err_irq; + goto err_res; } - hsudc->uclk = clk_get(&pdev->dev, "usb-device"); + hsudc->uclk = devm_clk_get(&pdev->dev, "usb-device"); if (IS_ERR(hsudc->uclk)) { dev_err(dev, "failed to find usb-device clock source\n"); ret = PTR_ERR(hsudc->uclk); - goto err_clk; + goto err_res; } clk_enable(hsudc->uclk); @@ -1377,21 +1363,12 @@ err_add_udc: device_unregister(&hsudc->gadget.dev); err_add_device: clk_disable(hsudc->uclk); - clk_put(hsudc->uclk); -err_clk: - free_irq(hsudc->irq, hsudc); -err_irq: - iounmap(hsudc->regs); - -err_remap: - release_mem_region(res->start, resource_size(res)); err_res: if (!IS_ERR_OR_NULL(hsudc->transceiver)) usb_put_phy(hsudc->transceiver); regulator_bulk_free(ARRAY_SIZE(hsudc->supplies), hsudc->supplies); err_supplies: - kfree(hsudc); return ret; } diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c index f2e51f50e528..c33e942d119c 100644 --- a/drivers/usb/gadget/s3c2410_udc.c +++ b/drivers/usb/gadget/s3c2410_udc.c @@ -12,6 +12,8 @@ * (at your option) any later version. */ +#define pr_fmt(fmt) "s3c2410_udc: " fmt + #include <linux/module.h> #include <linux/kernel.h> #include <linux/delay.h> @@ -27,6 +29,7 @@ #include <linux/clk.h> #include <linux/gpio.h> #include <linux/prefetch.h> +#include <linux/io.h> #include <linux/debugfs.h> #include <linux/seq_file.h> @@ -35,7 +38,6 @@ #include <linux/usb/gadget.h> #include <asm/byteorder.h> -#include <asm/io.h> #include <asm/irq.h> #include <asm/unaligned.h> #include <mach/irqs.h> @@ -115,7 +117,7 @@ static int dprintk(int level, const char *fmt, ...) sizeof(printk_buf)-len, fmt, args); va_end(args); - return printk(KERN_DEBUG "%s", printk_buf); + return pr_debug("%s", printk_buf); } #else static int dprintk(int level, const char *fmt, ...) @@ -125,10 +127,10 @@ static int dprintk(int level, const char *fmt, ...) #endif static int s3c2410_udc_debugfs_seq_show(struct seq_file *m, void *p) { - u32 addr_reg,pwr_reg,ep_int_reg,usb_int_reg; + u32 addr_reg, pwr_reg, ep_int_reg, usb_int_reg; u32 ep_int_en_reg, usb_int_en_reg, ep0_csr; - u32 ep1_i_csr1,ep1_i_csr2,ep1_o_csr1,ep1_o_csr2; - u32 ep2_i_csr1,ep2_i_csr2,ep2_o_csr1,ep2_o_csr2; + u32 ep1_i_csr1, ep1_i_csr2, ep1_o_csr1, ep1_o_csr2; + u32 ep2_i_csr1, ep2_i_csr2, ep2_o_csr1, ep2_o_csr2; addr_reg = udc_read(S3C2410_UDC_FUNC_ADDR_REG); pwr_reg = udc_read(S3C2410_UDC_PWR_REG); @@ -164,10 +166,10 @@ static int s3c2410_udc_debugfs_seq_show(struct seq_file *m, void *p) "EP2_I_CSR2 : 0x%04X\n" "EP2_O_CSR1 : 0x%04X\n" "EP2_O_CSR2 : 0x%04X\n", - addr_reg,pwr_reg,ep_int_reg,usb_int_reg, + addr_reg, pwr_reg, ep_int_reg, usb_int_reg, ep_int_en_reg, usb_int_en_reg, ep0_csr, - ep1_i_csr1,ep1_i_csr2,ep1_o_csr1,ep1_o_csr2, - ep2_i_csr1,ep2_i_csr2,ep2_o_csr1,ep2_o_csr2 + ep1_i_csr1, ep1_i_csr2, ep1_o_csr1, ep1_o_csr2, + ep2_i_csr1, ep2_i_csr2, ep2_o_csr1, ep2_o_csr2 ); return 0; @@ -230,7 +232,7 @@ static inline void s3c2410_udc_set_ep0_de_out(void __iomem *base) { udc_writeb(base, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG); - udc_writeb(base,(S3C2410_UDC_EP0_CSR_SOPKTRDY + udc_writeb(base, (S3C2410_UDC_EP0_CSR_SOPKTRDY | S3C2410_UDC_EP0_CSR_DE), S3C2410_UDC_EP0_CSR_REG); } @@ -263,7 +265,7 @@ static void s3c2410_udc_done(struct s3c2410_ep *ep, list_del_init(&req->queue); - if (likely (req->req.status == -EINPROGRESS)) + if (likely(req->req.status == -EINPROGRESS)) req->req.status = status; else status = req->req.status; @@ -280,9 +282,9 @@ static void s3c2410_udc_nuke(struct s3c2410_udc *udc, if (&ep->queue == NULL) return; - while (!list_empty (&ep->queue)) { + while (!list_empty(&ep->queue)) { struct s3c2410_request *req; - req = list_entry (ep->queue.next, struct s3c2410_request, + req = list_entry(ep->queue.next, struct s3c2410_request, queue); s3c2410_udc_done(ep, req, status); } @@ -389,10 +391,10 @@ static int s3c2410_udc_write_fifo(struct s3c2410_ep *ep, if (idx == 0) { /* Reset signal => no need to say 'data sent' */ - if (! (udc_read(S3C2410_UDC_USB_INT_REG) + if (!(udc_read(S3C2410_UDC_USB_INT_REG) & S3C2410_UDC_USBINT_RESET)) s3c2410_udc_set_ep0_de_in(base_addr); - ep->dev->ep0state=EP0_IDLE; + ep->dev->ep0state = EP0_IDLE; } else { udc_write(idx, S3C2410_UDC_INDEX_REG); ep_csr = udc_read(S3C2410_UDC_IN_CSR1_REG); @@ -406,7 +408,7 @@ static int s3c2410_udc_write_fifo(struct s3c2410_ep *ep, } else { if (idx == 0) { /* Reset signal => no need to say 'data sent' */ - if (! (udc_read(S3C2410_UDC_USB_INT_REG) + if (!(udc_read(S3C2410_UDC_USB_INT_REG) & S3C2410_UDC_USBINT_RESET)) s3c2410_udc_set_ep0_ipr(base_addr); } else { @@ -442,7 +444,7 @@ static int s3c2410_udc_read_fifo(struct s3c2410_ep *ep, u8 *buf; u32 ep_csr; unsigned bufferspace; - int is_last=1; + int is_last = 1; unsigned avail; int fifo_count = 0; u32 idx; @@ -510,7 +512,7 @@ static int s3c2410_udc_read_fifo(struct s3c2410_ep *ep, /* Only ep0 debug messages are interesting */ if (idx == 0) dprintk(DEBUG_VERBOSE, "%s fifo count : %d [last %d]\n", - __func__, fifo_count,is_last); + __func__, fifo_count, is_last); if (is_last) { if (idx == 0) { @@ -542,7 +544,7 @@ static int s3c2410_udc_read_fifo(struct s3c2410_ep *ep, static int s3c2410_udc_read_fifo_crq(struct usb_ctrlrequest *crq) { - unsigned char *outbuf = (unsigned char*)crq; + unsigned char *outbuf = (unsigned char *)crq; int bytes_read = 0; udc_write(0, S3C2410_UDC_INDEX_REG); @@ -648,7 +650,7 @@ static void s3c2410_udc_handle_ep0_idle(struct s3c2410_udc *dev, switch (crq->bRequest) { case USB_REQ_SET_CONFIGURATION: - dprintk(DEBUG_NORMAL, "USB_REQ_SET_CONFIGURATION ... \n"); + dprintk(DEBUG_NORMAL, "USB_REQ_SET_CONFIGURATION ...\n"); if (crq->bRequestType == USB_RECIP_DEVICE) { dev->req_config = 1; @@ -657,7 +659,7 @@ static void s3c2410_udc_handle_ep0_idle(struct s3c2410_udc *dev, break; case USB_REQ_SET_INTERFACE: - dprintk(DEBUG_NORMAL, "USB_REQ_SET_INTERFACE ... \n"); + dprintk(DEBUG_NORMAL, "USB_REQ_SET_INTERFACE ...\n"); if (crq->bRequestType == USB_RECIP_INTERFACE) { dev->req_config = 1; @@ -666,7 +668,7 @@ static void s3c2410_udc_handle_ep0_idle(struct s3c2410_udc *dev, break; case USB_REQ_SET_ADDRESS: - dprintk(DEBUG_NORMAL, "USB_REQ_SET_ADDRESS ... \n"); + dprintk(DEBUG_NORMAL, "USB_REQ_SET_ADDRESS ...\n"); if (crq->bRequestType == USB_RECIP_DEVICE) { tmp = crq->wValue & 0x7F; @@ -679,13 +681,12 @@ static void s3c2410_udc_handle_ep0_idle(struct s3c2410_udc *dev, break; case USB_REQ_GET_STATUS: - dprintk(DEBUG_NORMAL, "USB_REQ_GET_STATUS ... \n"); + dprintk(DEBUG_NORMAL, "USB_REQ_GET_STATUS ...\n"); s3c2410_udc_clear_ep0_opr(base_addr); if (dev->req_std) { - if (!s3c2410_udc_get_status(dev, crq)) { + if (!s3c2410_udc_get_status(dev, crq)) return; - } } break; @@ -750,7 +751,7 @@ static void s3c2410_udc_handle_ep0_idle(struct s3c2410_udc *dev, /* deferred i/o == no response yet */ } else if (dev->req_pending) { dprintk(DEBUG_VERBOSE, "dev->req_pending... what now?\n"); - dev->req_pending=0; + dev->req_pending = 0; } dprintk(DEBUG_VERBOSE, "ep0state %s\n", ep0states[dev->ep0state]); @@ -801,16 +802,14 @@ static void s3c2410_udc_handle_ep0(struct s3c2410_udc *dev) case EP0_IN_DATA_PHASE: /* GET_DESCRIPTOR etc */ dprintk(DEBUG_NORMAL, "EP0_IN_DATA_PHASE ... what now?\n"); - if (!(ep0csr & S3C2410_UDC_EP0_CSR_IPKRDY) && req) { + if (!(ep0csr & S3C2410_UDC_EP0_CSR_IPKRDY) && req) s3c2410_udc_write_fifo(ep, req); - } break; case EP0_OUT_DATA_PHASE: /* SET_DESCRIPTOR etc */ dprintk(DEBUG_NORMAL, "EP0_OUT_DATA_PHASE ... what now?\n"); - if ((ep0csr & S3C2410_UDC_EP0_CSR_OPKRDY) && req ) { - s3c2410_udc_read_fifo(ep,req); - } + if ((ep0csr & S3C2410_UDC_EP0_CSR_OPKRDY) && req) + s3c2410_udc_read_fifo(ep, req); break; case EP0_END_XFER: @@ -836,7 +835,7 @@ static void s3c2410_udc_handle_ep(struct s3c2410_ep *ep) u32 ep_csr1; u32 idx; - if (likely (!list_empty(&ep->queue))) + if (likely(!list_empty(&ep->queue))) req = list_entry(ep->queue.next, struct s3c2410_request, queue); else @@ -858,9 +857,8 @@ static void s3c2410_udc_handle_ep(struct s3c2410_ep *ep) return; } - if (!(ep_csr1 & S3C2410_UDC_ICSR1_PKTRDY) && req) { - s3c2410_udc_write_fifo(ep,req); - } + if (!(ep_csr1 & S3C2410_UDC_ICSR1_PKTRDY) && req) + s3c2410_udc_write_fifo(ep, req); } else { udc_write(idx, S3C2410_UDC_INDEX_REG); ep_csr1 = udc_read(S3C2410_UDC_OUT_CSR1_REG); @@ -873,9 +871,8 @@ static void s3c2410_udc_handle_ep(struct s3c2410_ep *ep) return; } - if ((ep_csr1 & S3C2410_UDC_OCSR1_PKTRDY) && req) { - s3c2410_udc_read_fifo(ep,req); - } + if ((ep_csr1 & S3C2410_UDC_OCSR1_PKTRDY) && req) + s3c2410_udc_read_fifo(ep, req); } } @@ -1057,7 +1054,7 @@ static int s3c2410_udc_ep_enable(struct usb_ep *_ep, struct s3c2410_ep *ep; u32 max, tmp; unsigned long flags; - u32 csr1,csr2; + u32 csr1, csr2; u32 int_en_reg; ep = to_s3c2410_ep(_ep); @@ -1073,7 +1070,7 @@ static int s3c2410_udc_ep_enable(struct usb_ep *_ep, max = usb_endpoint_maxp(desc) & 0x1fff; - local_irq_save (flags); + local_irq_save(flags); _ep->maxpacket = max & 0x7ff; ep->ep.desc = desc; ep->halted = 0; @@ -1117,11 +1114,11 @@ static int s3c2410_udc_ep_enable(struct usb_ep *_ep, /* print some debug message */ tmp = desc->bEndpointAddress; - dprintk (DEBUG_NORMAL, "enable %s(%d) ep%x%s-blk max %02x\n", - _ep->name,ep->num, tmp, + dprintk(DEBUG_NORMAL, "enable %s(%d) ep%x%s-blk max %02x\n", + _ep->name, ep->num, tmp, desc->bEndpointAddress & USB_DIR_IN ? "in" : "out", max); - local_irq_restore (flags); + local_irq_restore(flags); s3c2410_udc_set_halt(_ep, 0); return 0; @@ -1149,7 +1146,7 @@ static int s3c2410_udc_ep_disable(struct usb_ep *_ep) ep->ep.desc = NULL; ep->halted = 1; - s3c2410_udc_nuke (ep->dev, ep, -ESHUTDOWN); + s3c2410_udc_nuke(ep->dev, ep, -ESHUTDOWN); /* disable irqs */ int_en_reg = udc_read(S3C2410_UDC_EP_INT_EN_REG); @@ -1170,16 +1167,16 @@ s3c2410_udc_alloc_request(struct usb_ep *_ep, gfp_t mem_flags) { struct s3c2410_request *req; - dprintk(DEBUG_VERBOSE,"%s(%p,%d)\n", __func__, _ep, mem_flags); + dprintk(DEBUG_VERBOSE, "%s(%p,%d)\n", __func__, _ep, mem_flags); if (!_ep) return NULL; - req = kzalloc (sizeof(struct s3c2410_request), mem_flags); + req = kzalloc(sizeof(struct s3c2410_request), mem_flags); if (!req) return NULL; - INIT_LIST_HEAD (&req->queue); + INIT_LIST_HEAD(&req->queue); return &req->req; } @@ -1197,7 +1194,7 @@ s3c2410_udc_free_request(struct usb_ep *_ep, struct usb_request *_req) if (!ep || !_req || (!ep->ep.desc && _ep->name != ep0name)) return; - WARN_ON (!list_empty (&req->queue)); + WARN_ON(!list_empty(&req->queue)); kfree(req); } @@ -1220,12 +1217,12 @@ static int s3c2410_udc_queue(struct usb_ep *_ep, struct usb_request *_req, } dev = ep->dev; - if (unlikely (!dev->driver + if (unlikely(!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)) { return -ESHUTDOWN; } - local_irq_save (flags); + local_irq_save(flags); if (unlikely(!_req || !_req->complete || !_req->buf || !list_empty(&req->queue))) { @@ -1233,7 +1230,7 @@ static int s3c2410_udc_queue(struct usb_ep *_ep, struct usb_request *_req, dprintk(DEBUG_NORMAL, "%s: 1 X X X\n", __func__); else { dprintk(DEBUG_NORMAL, "%s: 0 %01d %01d %01d\n", - __func__, !_req->complete,!_req->buf, + __func__, !_req->complete, !_req->buf, !list_empty(&req->queue)); } @@ -1299,7 +1296,7 @@ static int s3c2410_udc_queue(struct usb_ep *_ep, struct usb_request *_req, } /* pio or dma irq handler advances the queue. */ - if (likely (req != 0)) + if (likely(req)) list_add_tail(&req->queue, &ep->queue); local_irq_restore(flags); @@ -1329,11 +1326,11 @@ static int s3c2410_udc_dequeue(struct usb_ep *_ep, struct usb_request *_req) udc = to_s3c2410_udc(ep->gadget); - local_irq_save (flags); + local_irq_save(flags); - list_for_each_entry (req, &ep->queue, queue) { + list_for_each_entry(req, &ep->queue, queue) { if (&req->req == _req) { - list_del_init (&req->queue); + list_del_init(&req->queue); _req->status = -ECONNRESET; retval = 0; break; @@ -1348,7 +1345,7 @@ static int s3c2410_udc_dequeue(struct usb_ep *_ep, struct usb_request *_req) s3c2410_udc_done(ep, req, -ECONNRESET); } - local_irq_restore (flags); + local_irq_restore(flags); return retval; } @@ -1367,7 +1364,7 @@ static int s3c2410_udc_set_halt(struct usb_ep *_ep, int value) return -EINVAL; } - local_irq_save (flags); + local_irq_save(flags); idx = ep->bEndpointAddress & 0x7F; @@ -1376,7 +1373,7 @@ static int s3c2410_udc_set_halt(struct usb_ep *_ep, int value) s3c2410_udc_set_ep0_de_out(base_addr); } else { udc_write(idx, S3C2410_UDC_INDEX_REG); - ep_csr = udc_read((ep->bEndpointAddress &USB_DIR_IN) + ep_csr = udc_read((ep->bEndpointAddress & USB_DIR_IN) ? S3C2410_UDC_IN_CSR1_REG : S3C2410_UDC_OUT_CSR1_REG); @@ -1404,7 +1401,7 @@ static int s3c2410_udc_set_halt(struct usb_ep *_ep, int value) } ep->halted = value ? 1 : 0; - local_irq_restore (flags); + local_irq_restore(flags); return 0; } @@ -1484,9 +1481,9 @@ static int s3c2410_udc_set_pullup(struct s3c2410_udc *udc, int is_on) } s3c2410_udc_disable(udc); } - } - else + } else { return -EOPNOTSUPP; + } return 0; } @@ -1542,7 +1539,7 @@ static int s3c2410_vbus_draw(struct usb_gadget *_gadget, unsigned ma) } static int s3c2410_udc_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)); + int (*bind)(struct usb_gadget *, struct usb_gadget_driver *)); static int s3c2410_udc_stop(struct usb_gadget_driver *driver); static const struct usb_gadget_ops s3c2410_ops = { @@ -1617,20 +1614,20 @@ static void s3c2410_udc_reinit(struct s3c2410_udc *dev) u32 i; /* device/ep0 records init */ - INIT_LIST_HEAD (&dev->gadget.ep_list); - INIT_LIST_HEAD (&dev->gadget.ep0->ep_list); + INIT_LIST_HEAD(&dev->gadget.ep_list); + INIT_LIST_HEAD(&dev->gadget.ep0->ep_list); dev->ep0state = EP0_IDLE; for (i = 0; i < S3C2410_ENDPOINTS; i++) { struct s3c2410_ep *ep = &dev->ep[i]; if (i != 0) - list_add_tail (&ep->ep.ep_list, &dev->gadget.ep_list); + list_add_tail(&ep->ep.ep_list, &dev->gadget.ep_list); ep->dev = dev; ep->ep.desc = NULL; ep->halted = 0; - INIT_LIST_HEAD (&ep->queue); + INIT_LIST_HEAD(&ep->queue); } } @@ -1668,7 +1665,7 @@ static void s3c2410_udc_enable(struct s3c2410_udc *dev) } static int s3c2410_udc_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)) + int (*bind)(struct usb_gadget *, struct usb_gadget_driver *)) { struct s3c2410_udc *udc = the_controller; int retval; @@ -1683,13 +1680,13 @@ static int s3c2410_udc_start(struct usb_gadget_driver *driver, return -EBUSY; if (!bind || !driver->setup || driver->max_speed < USB_SPEED_FULL) { - printk(KERN_ERR "Invalid driver: bind %p setup %p speed %d\n", + dev_err(&udc->gadget.dev, "Invalid driver: bind %p setup %p speed %d\n", bind, driver->setup, driver->max_speed); return -EINVAL; } #if defined(MODULE) if (!driver->unbind) { - printk(KERN_ERR "Invalid driver: no unbind method\n"); + dev_err(&udc->gadget.dev, "Invalid driver: no unbind method\n"); return -EINVAL; } #endif @@ -1699,15 +1696,17 @@ static int s3c2410_udc_start(struct usb_gadget_driver *driver, udc->gadget.dev.driver = &driver->driver; /* Bind the driver */ - if ((retval = device_add(&udc->gadget.dev)) != 0) { - printk(KERN_ERR "Error in device_add() : %d\n",retval); + retval = device_add(&udc->gadget.dev); + if (retval) { + dev_err(&udc->gadget.dev, "Error in device_add() : %d\n", retval); goto register_error; } dprintk(DEBUG_NORMAL, "binding gadget driver '%s'\n", driver->driver.name); - if ((retval = bind(&udc->gadget)) != 0) { + retval = bind(&udc->gadget, driver); + if (retval) { device_del(&udc->gadget.dev); goto register_error; } @@ -1865,7 +1864,7 @@ static int s3c2410_udc_probe(struct platform_device *pdev) memory.ep[4].fifo_size = S3C2440_EP_FIFO_SIZE; } - spin_lock_init (&udc->lock); + spin_lock_init(&udc->lock); udc_info = pdev->dev.platform_data; rsrc_start = S3C2410_PA_USBDEV; @@ -2028,7 +2027,8 @@ static int s3c2410_udc_remove(struct platform_device *pdev) } #ifdef CONFIG_PM -static int s3c2410_udc_suspend(struct platform_device *pdev, pm_message_t message) +static int +s3c2410_udc_suspend(struct platform_device *pdev, pm_message_t message) { s3c2410_udc_command(S3C2410_UDC_P_DISABLE); @@ -2073,7 +2073,7 @@ static int __init udc_init(void) s3c2410_udc_debugfs_root = debugfs_create_dir(gadget_name, NULL); if (IS_ERR(s3c2410_udc_debugfs_root)) { - printk(KERN_ERR "%s: debugfs dir creation failed %ld\n", + pr_err("%s: debugfs dir creation failed %ld\n", gadget_name, PTR_ERR(s3c2410_udc_debugfs_root)); s3c2410_udc_debugfs_root = NULL; } diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c index 665c07422c26..44752f531e85 100644 --- a/drivers/usb/gadget/serial.c +++ b/drivers/usb/gadget/serial.c @@ -11,7 +11,6 @@ */ #include <linux/kernel.h> -#include <linux/utsname.h> #include <linux/device.h> #include <linux/tty.h> #include <linux/tty_flip.h> @@ -37,17 +36,13 @@ * the runtime footprint, and giving us at least some parts of what * a "gcc --combine ... part1.c part2.c part3.c ... " build would. */ -#include "composite.c" -#include "usbstring.c" -#include "config.c" -#include "epautoconf.c" - #include "f_acm.c" #include "f_obex.c" #include "f_serial.c" #include "u_serial.c" /*-------------------------------------------------------------------------*/ +USB_GADGET_COMPOSITE_OPTIONS(); /* Thanks to NetChip Technologies for donating this product ID. * @@ -61,15 +56,12 @@ /* string IDs are assigned dynamically */ -#define STRING_MANUFACTURER_IDX 0 -#define STRING_PRODUCT_IDX 1 -#define STRING_DESCRIPTION_IDX 2 - -static char manufacturer[50]; +#define STRING_DESCRIPTION_IDX USB_GADGET_FIRST_AVAIL_IDX static struct usb_string strings_dev[] = { - [STRING_MANUFACTURER_IDX].s = manufacturer, - [STRING_PRODUCT_IDX].s = GS_VERSION_NAME, + [USB_GADGET_MANUFACTURER_IDX].s = "", + [USB_GADGET_PRODUCT_IDX].s = GS_VERSION_NAME, + [USB_GADGET_SERIAL_IDX].s = "", [STRING_DESCRIPTION_IDX].s = NULL /* updated; f(use_acm) */, { } /* end of list */ }; @@ -94,7 +86,7 @@ static struct usb_device_descriptor device_desc = { /* .bMaxPacketSize0 = f(hardware) */ .idVendor = cpu_to_le16(GS_VENDOR_ID), /* .idProduct = f(use_acm) */ - /* .bcdDevice = f(hardware) */ + .bcdDevice = cpu_to_le16(GS_VERSION_NUM), /* .iManufacturer = DYNAMIC */ /* .iProduct = DYNAMIC */ .bNumConfigurations = 1, @@ -162,8 +154,6 @@ static struct usb_configuration serial_config_driver = { static int __init gs_bind(struct usb_composite_dev *cdev) { - int gcnum; - struct usb_gadget *gadget = cdev->gadget; int status; status = gserial_setup(cdev->gadget, n_ports); @@ -174,50 +164,14 @@ static int __init gs_bind(struct usb_composite_dev *cdev) * contents can be overridden by the composite_dev glue. */ - /* device description: manufacturer, product */ - snprintf(manufacturer, sizeof manufacturer, "%s %s with %s", - init_utsname()->sysname, init_utsname()->release, - gadget->name); - status = usb_string_id(cdev); + status = usb_string_ids_tab(cdev, strings_dev); if (status < 0) goto fail; - strings_dev[STRING_MANUFACTURER_IDX].id = status; - - device_desc.iManufacturer = status; - - status = usb_string_id(cdev); - if (status < 0) - goto fail; - strings_dev[STRING_PRODUCT_IDX].id = status; - - device_desc.iProduct = status; - - /* config description */ - status = usb_string_id(cdev); - if (status < 0) - goto fail; - strings_dev[STRING_DESCRIPTION_IDX].id = status; - + device_desc.iManufacturer = strings_dev[USB_GADGET_MANUFACTURER_IDX].id; + device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id; + status = strings_dev[STRING_DESCRIPTION_IDX].id; serial_config_driver.iConfiguration = status; - /* set up other descriptors */ - gcnum = usb_gadget_controller_number(gadget); - if (gcnum >= 0) - device_desc.bcdDevice = cpu_to_le16(GS_VERSION_NUM | gcnum); - else { - /* this is so simple (for now, no altsettings) that it - * SHOULD NOT have problems with bulk-capable hardware. - * so warn about unrcognized controllers -- don't panic. - * - * things like configuration and altsetting numbering - * can need hardware-specific attention though. - */ - pr_warning("gs_bind: controller '%s' not recognized\n", - gadget->name); - device_desc.bcdDevice = - cpu_to_le16(GS_VERSION_NUM | 0x0099); - } - if (gadget_is_otg(cdev->gadget)) { serial_config_driver.descriptors = otg_desc; serial_config_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP; @@ -229,6 +183,7 @@ static int __init gs_bind(struct usb_composite_dev *cdev) if (status < 0) goto fail; + usb_composite_overwrite_options(cdev, &coverwrite); INFO(cdev, "%s\n", GS_VERSION_NAME); return 0; @@ -238,11 +193,12 @@ fail: return status; } -static struct usb_composite_driver gserial_driver = { +static __refdata struct usb_composite_driver gserial_driver = { .name = "g_serial", .dev = &device_desc, .strings = dev_strings, .max_speed = USB_SPEED_SUPER, + .bind = gs_bind, }; static int __init init(void) @@ -271,7 +227,7 @@ static int __init init(void) } strings_dev[STRING_DESCRIPTION_IDX].s = serial_config_driver.label; - return usb_composite_probe(&gserial_driver, gs_bind); + return usb_composite_probe(&gserial_driver); } module_init(init); diff --git a/drivers/usb/gadget/tcm_usb_gadget.c b/drivers/usb/gadget/tcm_usb_gadget.c index 5444866e13ef..eaa1005377fc 100644 --- a/drivers/usb/gadget/tcm_usb_gadget.c +++ b/drivers/usb/gadget/tcm_usb_gadget.c @@ -25,13 +25,10 @@ #include <target/configfs_macros.h> #include <asm/unaligned.h> -#include "usbstring.c" -#include "epautoconf.c" -#include "config.c" -#include "composite.c" - #include "tcm_usb_gadget.h" +USB_GADGET_COMPOSITE_OPTIONS(); + static struct target_fabric_configfs *usbg_fabric_configfs; static inline struct f_uas *to_f_uas(struct usb_function *f) @@ -1977,7 +1974,6 @@ static struct usb_interface_descriptor bot_intf_desc = { .bInterfaceClass = USB_CLASS_MASS_STORAGE, .bInterfaceSubClass = USB_SC_SCSI, .bInterfaceProtocol = USB_PR_BULK, - .iInterface = USB_G_STR_INT_UAS, }; static struct usb_interface_descriptor uasp_intf_desc = { @@ -1988,7 +1984,6 @@ static struct usb_interface_descriptor uasp_intf_desc = { .bInterfaceClass = USB_CLASS_MASS_STORAGE, .bInterfaceSubClass = USB_SC_SCSI, .bInterfaceProtocol = USB_PR_UAS, - .iInterface = USB_G_STR_INT_BBB, }; static struct usb_endpoint_descriptor uasp_bi_desc = { @@ -2209,20 +2204,16 @@ static struct usb_device_descriptor usbg_device_desc = { .bDeviceClass = USB_CLASS_PER_INTERFACE, .idVendor = cpu_to_le16(UAS_VENDOR_ID), .idProduct = cpu_to_le16(UAS_PRODUCT_ID), - .iManufacturer = USB_G_STR_MANUFACTOR, - .iProduct = USB_G_STR_PRODUCT, - .iSerialNumber = USB_G_STR_SERIAL, - .bNumConfigurations = 1, }; static struct usb_string usbg_us_strings[] = { - { USB_G_STR_MANUFACTOR, "Target Manufactor"}, - { USB_G_STR_PRODUCT, "Target Product"}, - { USB_G_STR_SERIAL, "000000000001"}, - { USB_G_STR_CONFIG, "default config"}, - { USB_G_STR_INT_UAS, "USB Attached SCSI"}, - { USB_G_STR_INT_BBB, "Bulk Only Transport"}, + [USB_GADGET_MANUFACTURER_IDX].s = "Target Manufactor", + [USB_GADGET_PRODUCT_IDX].s = "Target Product", + [USB_GADGET_SERIAL_IDX].s = "000000000001", + [USB_G_STR_CONFIG].s = "default config", + [USB_G_STR_INT_UAS].s = "USB Attached SCSI", + [USB_G_STR_INT_BBB].s = "Bulk Only Transport", { }, }; @@ -2244,7 +2235,6 @@ static int guas_unbind(struct usb_composite_dev *cdev) static struct usb_configuration usbg_config_driver = { .label = "Linux Target", .bConfigurationValue = 1, - .iConfiguration = USB_G_STR_CONFIG, .bmAttributes = USB_CONFIG_ATT_SELFPOWER, }; @@ -2417,6 +2407,9 @@ static int usbg_cfg_bind(struct usb_configuration *c) fu->function.disable = usbg_disable; fu->tpg = the_only_tpg_I_currently_have; + bot_intf_desc.iInterface = usbg_us_strings[USB_G_STR_INT_BBB].id; + uasp_intf_desc.iInterface = usbg_us_strings[USB_G_STR_INT_UAS].id; + ret = usb_add_function(c, &fu->function); if (ret) goto err; @@ -2431,22 +2424,38 @@ static int usb_target_bind(struct usb_composite_dev *cdev) { int ret; + ret = usb_string_ids_tab(cdev, usbg_us_strings); + if (ret) + return ret; + + usbg_device_desc.iManufacturer = + usbg_us_strings[USB_GADGET_MANUFACTURER_IDX].id; + usbg_device_desc.iProduct = usbg_us_strings[USB_GADGET_PRODUCT_IDX].id; + usbg_device_desc.iSerialNumber = + usbg_us_strings[USB_GADGET_SERIAL_IDX].id; + usbg_config_driver.iConfiguration = + usbg_us_strings[USB_G_STR_CONFIG].id; + ret = usb_add_config(cdev, &usbg_config_driver, usbg_cfg_bind); + if (ret) + return ret; + usb_composite_overwrite_options(cdev, &coverwrite); return 0; } -static struct usb_composite_driver usbg_driver = { +static __refdata struct usb_composite_driver usbg_driver = { .name = "g_target", .dev = &usbg_device_desc, .strings = usbg_strings, .max_speed = USB_SPEED_SUPER, + .bind = usb_target_bind, .unbind = guas_unbind, }; static int usbg_attach(struct usbg_tpg *tpg) { - return usb_composite_probe(&usbg_driver, usb_target_bind); + return usb_composite_probe(&usbg_driver); } static void usbg_detach(struct usbg_tpg *tpg) diff --git a/drivers/usb/gadget/tcm_usb_gadget.h b/drivers/usb/gadget/tcm_usb_gadget.h index bb18999a9a8d..8289219925b8 100644 --- a/drivers/usb/gadget/tcm_usb_gadget.h +++ b/drivers/usb/gadget/tcm_usb_gadget.h @@ -16,12 +16,11 @@ #define UASP_SS_EP_COMP_LOG_STREAMS 4 #define UASP_SS_EP_COMP_NUM_STREAMS (1 << UASP_SS_EP_COMP_LOG_STREAMS) -#define USB_G_STR_MANUFACTOR 1 -#define USB_G_STR_PRODUCT 2 -#define USB_G_STR_SERIAL 3 -#define USB_G_STR_CONFIG 4 -#define USB_G_STR_INT_UAS 5 -#define USB_G_STR_INT_BBB 6 +enum { + USB_G_STR_CONFIG = USB_GADGET_FIRST_AVAIL_IDX, + USB_G_STR_INT_UAS, + USB_G_STR_INT_BBB, +}; #define USB_G_ALT_INT_BBB 0 #define USB_G_ALT_INT_UAS 1 diff --git a/drivers/usb/gadget/u_ether.c b/drivers/usb/gadget/u_ether.c index 0e5230926154..b9c46900c2c1 100644 --- a/drivers/usb/gadget/u_ether.c +++ b/drivers/usb/gadget/u_ether.c @@ -14,6 +14,7 @@ /* #define VERBOSE_DEBUG */ #include <linux/kernel.h> +#include <linux/module.h> #include <linux/gfp.h> #include <linux/device.h> #include <linux/ctype.h> @@ -83,17 +84,10 @@ struct eth_dev { #define DEFAULT_QLEN 2 /* double buffering by default */ - -#ifdef CONFIG_USB_GADGET_DUALSPEED - static unsigned qmult = 5; module_param(qmult, uint, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(qmult, "queue length multiplier at high/super speed"); -#else /* full speed (low speed doesn't do bulk) */ -#define qmult 1 -#endif - /* for dual-speed hardware, use deeper queues at high/super speed */ static inline int qlen(struct usb_gadget *gadget) { diff --git a/drivers/usb/gadget/udc-core.c b/drivers/usb/gadget/udc-core.c index e5e44f8cde9a..f3cd9690b101 100644 --- a/drivers/usb/gadget/udc-core.c +++ b/drivers/usb/gadget/udc-core.c @@ -118,7 +118,7 @@ EXPORT_SYMBOL_GPL(usb_gadget_unmap_request); */ static inline int usb_gadget_start(struct usb_gadget *gadget, struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)) + int (*bind)(struct usb_gadget *, struct usb_gadget_driver *)) { return gadget->ops->start(driver, bind); } @@ -262,8 +262,8 @@ static void usb_gadget_remove_driver(struct usb_udc *udc) kobject_uevent(&udc->dev.kobj, KOBJ_CHANGE); if (udc_is_newstyle(udc)) { - udc->driver->disconnect(udc->gadget); usb_gadget_disconnect(udc->gadget); + udc->driver->disconnect(udc->gadget); udc->driver->unbind(udc->gadget); usb_gadget_udc_stop(udc->gadget, udc->driver); } else { @@ -311,13 +311,12 @@ EXPORT_SYMBOL_GPL(usb_del_gadget_udc); /* ------------------------------------------------------------------------- */ -int usb_gadget_probe_driver(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)) +int usb_gadget_probe_driver(struct usb_gadget_driver *driver) { struct usb_udc *udc = NULL; int ret; - if (!driver || !bind || !driver->setup) + if (!driver || !driver->bind || !driver->setup) return -EINVAL; mutex_lock(&udc_lock); @@ -339,7 +338,7 @@ found: udc->dev.driver = &driver->driver; if (udc_is_newstyle(udc)) { - ret = bind(udc->gadget); + ret = driver->bind(udc->gadget, driver); if (ret) goto err1; ret = usb_gadget_udc_start(udc->gadget, driver); @@ -350,7 +349,7 @@ found: usb_gadget_connect(udc->gadget); } else { - ret = usb_gadget_start(udc->gadget, driver, bind); + ret = usb_gadget_start(udc->gadget, driver, driver->bind); if (ret) goto err1; diff --git a/drivers/usb/gadget/usbstring.c b/drivers/usb/gadget/usbstring.c index 4d25b9009edf..1f49fce0f0b7 100644 --- a/drivers/usb/gadget/usbstring.c +++ b/drivers/usb/gadget/usbstring.c @@ -9,6 +9,7 @@ #include <linux/errno.h> #include <linux/kernel.h> +#include <linux/module.h> #include <linux/list.h> #include <linux/string.h> #include <linux/device.h> @@ -68,4 +69,4 @@ usb_gadget_get_string (struct usb_gadget_strings *table, int id, u8 *buf) buf [1] = USB_DT_STRING; return buf [0]; } - +EXPORT_SYMBOL_GPL(usb_gadget_get_string); diff --git a/drivers/usb/gadget/webcam.c b/drivers/usb/gadget/webcam.c index 120e134e805e..69cf5c2cd335 100644 --- a/drivers/usb/gadget/webcam.c +++ b/drivers/usb/gadget/webcam.c @@ -23,16 +23,12 @@ * the runtime footprint, and giving us at least some parts of what * a "gcc --combine ... part1.c part2.c part3.c ... " build would. */ -#include "composite.c" -#include "usbstring.c" -#include "config.c" -#include "epautoconf.c" - #include "uvc_queue.c" #include "uvc_video.c" #include "uvc_v4l2.c" #include "f_uvc.c" +USB_GADGET_COMPOSITE_OPTIONS(); /* -------------------------------------------------------------------------- * Device descriptor */ @@ -47,13 +43,12 @@ static char webcam_config_label[] = "Video"; /* string IDs are assigned dynamically */ -#define STRING_MANUFACTURER_IDX 0 -#define STRING_PRODUCT_IDX 1 -#define STRING_DESCRIPTION_IDX 2 +#define STRING_DESCRIPTION_IDX USB_GADGET_FIRST_AVAIL_IDX static struct usb_string webcam_strings[] = { - [STRING_MANUFACTURER_IDX].s = webcam_vendor_label, - [STRING_PRODUCT_IDX].s = webcam_product_label, + [USB_GADGET_MANUFACTURER_IDX].s = webcam_vendor_label, + [USB_GADGET_PRODUCT_IDX].s = webcam_product_label, + [USB_GADGET_SERIAL_IDX].s = "", [STRING_DESCRIPTION_IDX].s = webcam_config_label, { } }; @@ -358,26 +353,22 @@ webcam_bind(struct usb_composite_dev *cdev) /* Allocate string descriptor numbers ... note that string contents * can be overridden by the composite_dev glue. */ - if ((ret = usb_string_id(cdev)) < 0) - goto error; - webcam_strings[STRING_MANUFACTURER_IDX].id = ret; - webcam_device_descriptor.iManufacturer = ret; - - if ((ret = usb_string_id(cdev)) < 0) - goto error; - webcam_strings[STRING_PRODUCT_IDX].id = ret; - webcam_device_descriptor.iProduct = ret; - - if ((ret = usb_string_id(cdev)) < 0) + ret = usb_string_ids_tab(cdev, webcam_strings); + if (ret < 0) goto error; - webcam_strings[STRING_DESCRIPTION_IDX].id = ret; - webcam_config_driver.iConfiguration = ret; + webcam_device_descriptor.iManufacturer = + webcam_strings[USB_GADGET_MANUFACTURER_IDX].id; + webcam_device_descriptor.iProduct = + webcam_strings[USB_GADGET_PRODUCT_IDX].id; + webcam_config_driver.iConfiguration = + webcam_strings[STRING_DESCRIPTION_IDX].id; /* Register our configuration. */ if ((ret = usb_add_config(cdev, &webcam_config_driver, webcam_config_bind)) < 0) goto error; + usb_composite_overwrite_options(cdev, &coverwrite); INFO(cdev, "Webcam Video Gadget\n"); return 0; @@ -390,18 +381,19 @@ error: * Driver */ -static struct usb_composite_driver webcam_driver = { +static __refdata struct usb_composite_driver webcam_driver = { .name = "g_webcam", .dev = &webcam_device_descriptor, .strings = webcam_device_strings, .max_speed = USB_SPEED_SUPER, + .bind = webcam_bind, .unbind = webcam_unbind, }; static int __init webcam_init(void) { - return usb_composite_probe(&webcam_driver, webcam_bind); + return usb_composite_probe(&webcam_driver); } static void __exit diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c index 12ad516ada77..6bf4c0611365 100644 --- a/drivers/usb/gadget/zero.c +++ b/drivers/usb/gadget/zero.c @@ -42,7 +42,6 @@ #include <linux/kernel.h> #include <linux/slab.h> -#include <linux/utsname.h> #include <linux/device.h> #include "g_zero.h" @@ -58,15 +57,11 @@ * the runtime footprint, and giving us at least some parts of what * a "gcc --combine ... part1.c part2.c part3.c ... " build would. */ -#include "composite.c" -#include "usbstring.c" -#include "config.c" -#include "epautoconf.c" - #include "f_sourcesink.c" #include "f_loopback.c" /*-------------------------------------------------------------------------*/ +USB_GADGET_COMPOSITE_OPTIONS(); #define DRIVER_VERSION "Cinco de Mayo 2008" @@ -141,20 +136,13 @@ const struct usb_descriptor_header *otg_desc[] = { #endif /* string IDs are assigned dynamically */ - -#define STRING_MANUFACTURER_IDX 0 -#define STRING_PRODUCT_IDX 1 -#define STRING_SERIAL_IDX 2 - -static char manufacturer[50]; - /* default serial number takes at least two packets */ static char serial[] = "0123456789.0123456789.0123456789"; static struct usb_string strings_dev[] = { - [STRING_MANUFACTURER_IDX].s = manufacturer, - [STRING_PRODUCT_IDX].s = longname, - [STRING_SERIAL_IDX].s = serial, + [USB_GADGET_MANUFACTURER_IDX].s = "", + [USB_GADGET_PRODUCT_IDX].s = longname, + [USB_GADGET_SERIAL_IDX].s = serial, { } /* end of list */ }; @@ -265,30 +253,18 @@ static void zero_resume(struct usb_composite_dev *cdev) static int __init zero_bind(struct usb_composite_dev *cdev) { - int gcnum; - struct usb_gadget *gadget = cdev->gadget; - int id; + int status; /* Allocate string descriptor numbers ... note that string * contents can be overridden by the composite_dev glue. */ - id = usb_string_id(cdev); - if (id < 0) - return id; - strings_dev[STRING_MANUFACTURER_IDX].id = id; - device_desc.iManufacturer = id; - - id = usb_string_id(cdev); - if (id < 0) - return id; - strings_dev[STRING_PRODUCT_IDX].id = id; - device_desc.iProduct = id; - - id = usb_string_id(cdev); - if (id < 0) - return id; - strings_dev[STRING_SERIAL_IDX].id = id; - device_desc.iSerialNumber = id; + status = usb_string_ids_tab(cdev, strings_dev); + if (status < 0) + return status; + + device_desc.iManufacturer = strings_dev[USB_GADGET_MANUFACTURER_IDX].id; + device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id; + device_desc.iSerialNumber = strings_dev[USB_GADGET_SERIAL_IDX].id; setup_timer(&autoresume_timer, zero_autoresume, (unsigned long) cdev); @@ -303,28 +279,10 @@ static int __init zero_bind(struct usb_composite_dev *cdev) loopback_add(cdev, autoresume != 0); } - gcnum = usb_gadget_controller_number(gadget); - if (gcnum >= 0) - device_desc.bcdDevice = cpu_to_le16(0x0200 + gcnum); - else { - /* gadget zero is so simple (for now, no altsettings) that - * it SHOULD NOT have problems with bulk-capable hardware. - * so just warn about unrcognized controllers -- don't panic. - * - * things like configuration and altsetting numbering - * can need hardware-specific attention though. - */ - pr_warning("%s: controller '%s' not recognized\n", - longname, gadget->name); - device_desc.bcdDevice = cpu_to_le16(0x9999); - } + usb_composite_overwrite_options(cdev, &coverwrite); INFO(cdev, "%s, version: " DRIVER_VERSION "\n", longname); - snprintf(manufacturer, sizeof manufacturer, "%s %s with %s", - init_utsname()->sysname, init_utsname()->release, - gadget->name); - return 0; } @@ -334,11 +292,12 @@ static int zero_unbind(struct usb_composite_dev *cdev) return 0; } -static struct usb_composite_driver zero_driver = { +static __refdata struct usb_composite_driver zero_driver = { .name = "zero", .dev = &device_desc, .strings = dev_strings, .max_speed = USB_SPEED_SUPER, + .bind = zero_bind, .unbind = zero_unbind, .suspend = zero_suspend, .resume = zero_resume, @@ -349,7 +308,7 @@ MODULE_LICENSE("GPL"); static int __init init(void) { - return usb_composite_probe(&zero_driver, zero_bind); + return usb_composite_probe(&zero_driver); } module_init(init); diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 075d2eca8108..b1deb0fd4197 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -18,8 +18,8 @@ config USB_C67X00_HCD module will be called c67x00. config USB_XHCI_HCD - tristate "xHCI HCD (USB 3.0) support (EXPERIMENTAL)" - depends on USB && USB_ARCH_HAS_XHCI && EXPERIMENTAL + tristate "xHCI HCD (USB 3.0) support" + depends on USB && USB_ARCH_HAS_XHCI ---help--- The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0 "SuperSpeed" host controller hardware. @@ -262,7 +262,7 @@ config USB_ISP116X_HCD config USB_ISP1760_HCD tristate "ISP 1760 HCD support" - depends on USB && EXPERIMENTAL + depends on USB ---help--- The ISP1760 chip is a USB 2.0 host controller. @@ -292,7 +292,7 @@ config USB_OHCI_HCD depends on USB && USB_ARCH_HAS_OHCI select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 select USB_OTG_UTILS if ARCH_OMAP - select USB_ISP1301 if ARCH_LPC32XX || ARCH_PNX4008 + depends on USB_ISP1301 || !(ARCH_LPC32XX || ARCH_PNX4008) ---help--- The Open Host Controller Interface (OHCI) is a standard for accessing USB 1.1 host controller hardware. It does more in hardware than Intel's @@ -376,7 +376,7 @@ config USB_OHCI_HCD_PCI config USB_OHCI_HCD_SSB bool "OHCI support for Broadcom SSB OHCI core (DEPRECATED)" - depends on USB_OHCI_HCD && (SSB = y || SSB = USB_OHCI_HCD) && EXPERIMENTAL + depends on USB_OHCI_HCD && (SSB = y || SSB = USB_OHCI_HCD) select USB_HCD_SSB select USB_OHCI_HCD_PLATFORM default n @@ -414,21 +414,21 @@ config USB_CNS3XXX_OHCI config USB_OHCI_HCD_PLATFORM bool "Generic OHCI driver for a platform device" - depends on USB_OHCI_HCD && EXPERIMENTAL + depends on USB_OHCI_HCD default n ---help--- Adds an OHCI host driver for a generic platform device, which - provieds a memory space and an irq. + provides a memory space and an irq. If unsure, say N. config USB_EHCI_HCD_PLATFORM bool "Generic EHCI driver for a platform device" - depends on USB_EHCI_HCD && EXPERIMENTAL + depends on USB_EHCI_HCD default n ---help--- Adds an EHCI host driver for a generic platform device, which - provieds a memory space and an irq. + provides a memory space and an irq. If unsure, say N. @@ -450,7 +450,7 @@ config USB_OHCI_LITTLE_ENDIAN config USB_UHCI_HCD tristate "UHCI HCD (most Intel and VIA) support" - depends on USB && (PCI || SPARC_LEON) + depends on USB && (PCI || SPARC_LEON || ARCH_VT8500) ---help--- The Universal Host Controller Interface is a standard by Intel for accessing the USB hardware in the PC (which is also called the USB @@ -468,7 +468,15 @@ config USB_UHCI_HCD config USB_UHCI_SUPPORT_NON_PCI_HC bool depends on USB_UHCI_HCD - default y if SPARC_LEON + default y if (SPARC_LEON || ARCH_VT8500) + +config USB_UHCI_PLATFORM + bool "Generic UHCI Platform Driver support" + depends on USB_UHCI_SUPPORT_NON_PCI_HC + default y if ARCH_VT8500 + ---help--- + Enable support for generic UHCI platform devices that require no + additional configuration. config USB_UHCI_BIG_ENDIAN_MMIO bool @@ -583,8 +591,7 @@ config USB_RENESAS_USBHS_HCD module will be called renesas-usbhs. config USB_WHCI_HCD - tristate "Wireless USB Host Controller Interface (WHCI) driver (EXPERIMENTAL)" - depends on EXPERIMENTAL + tristate "Wireless USB Host Controller Interface (WHCI) driver" depends on PCI && USB && UWB select USB_WUSB select UWB_WHCI @@ -596,8 +603,7 @@ config USB_WHCI_HCD will be called "whci-hcd". config USB_HWA_HCD - tristate "Host Wire Adapter (HWA) driver (EXPERIMENTAL)" - depends on EXPERIMENTAL + tristate "Host Wire Adapter (HWA) driver" depends on USB && UWB select USB_WUSB select UWB_HWA @@ -648,7 +654,7 @@ config USB_OCTEON2_COMMON config USB_HCD_BCMA tristate "BCMA usb host driver" - depends on BCMA && EXPERIMENTAL + depends on BCMA select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD help @@ -660,7 +666,7 @@ config USB_HCD_BCMA config USB_HCD_SSB tristate "SSB usb host driver" - depends on SSB && EXPERIMENTAL + depends on SSB select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD help diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c index a47e2cffaaf8..411bb74152eb 100644 --- a/drivers/usb/host/ehci-atmel.c +++ b/drivers/usb/host/ehci-atmel.c @@ -150,31 +150,24 @@ static int __devinit ehci_atmel_drv_probe(struct platform_device *pdev) hcd->rsrc_start = res->start; hcd->rsrc_len = resource_size(res); - if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, - driver->description)) { - dev_dbg(&pdev->dev, "controller already in use\n"); - retval = -EBUSY; - goto fail_request_resource; - } - - hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len); + hcd->regs = devm_request_and_ioremap(&pdev->dev, res); if (hcd->regs == NULL) { dev_dbg(&pdev->dev, "error mapping memory\n"); retval = -EFAULT; - goto fail_ioremap; + goto fail_request_resource; } - iclk = clk_get(&pdev->dev, "ehci_clk"); + iclk = devm_clk_get(&pdev->dev, "ehci_clk"); if (IS_ERR(iclk)) { dev_err(&pdev->dev, "Error getting interface clock\n"); retval = -ENOENT; - goto fail_get_iclk; + goto fail_request_resource; } - fclk = clk_get(&pdev->dev, "uhpck"); + fclk = devm_clk_get(&pdev->dev, "uhpck"); if (IS_ERR(fclk)) { dev_err(&pdev->dev, "Error getting function clock\n"); retval = -ENOENT; - goto fail_get_fclk; + goto fail_request_resource; } atmel_start_ehci(pdev); @@ -187,13 +180,6 @@ static int __devinit ehci_atmel_drv_probe(struct platform_device *pdev) fail_add_hcd: atmel_stop_ehci(pdev); - clk_put(fclk); -fail_get_fclk: - clk_put(iclk); -fail_get_iclk: - iounmap(hcd->regs); -fail_ioremap: - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); fail_request_resource: usb_put_hcd(hcd); fail_create_hcd: @@ -209,13 +195,9 @@ static int __devexit ehci_atmel_drv_remove(struct platform_device *pdev) ehci_shutdown(hcd); usb_remove_hcd(hcd); - iounmap(hcd->regs); - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); usb_put_hcd(hcd); atmel_stop_ehci(pdev); - clk_put(fclk); - clk_put(iclk); fclk = iclk = NULL; return 0; diff --git a/drivers/usb/host/ehci-au1xxx.c b/drivers/usb/host/ehci-au1xxx.c index cba10d625a5d..65c945eb4144 100644 --- a/drivers/usb/host/ehci-au1xxx.c +++ b/drivers/usb/host/ehci-au1xxx.c @@ -98,23 +98,17 @@ static int ehci_hcd_au1xxx_drv_probe(struct platform_device *pdev) hcd->rsrc_start = res->start; hcd->rsrc_len = resource_size(res); - if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { - pr_debug("request_mem_region failed"); - ret = -EBUSY; - goto err1; - } - - hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); + hcd->regs = devm_request_and_ioremap(&pdev->dev, res); if (!hcd->regs) { - pr_debug("ioremap failed"); + pr_debug("devm_request_and_ioremap failed"); ret = -ENOMEM; - goto err2; + goto err1; } if (alchemy_usb_control(ALCHEMY_USB_EHCI0, 1)) { printk(KERN_INFO "%s: controller init failed!\n", pdev->name); ret = -ENODEV; - goto err3; + goto err1; } ret = usb_add_hcd(hcd, pdev->resource[1].start, @@ -125,10 +119,6 @@ static int ehci_hcd_au1xxx_drv_probe(struct platform_device *pdev) } alchemy_usb_control(ALCHEMY_USB_EHCI0, 0); -err3: - iounmap(hcd->regs); -err2: - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); err1: usb_put_hcd(hcd); return ret; @@ -140,8 +130,6 @@ static int ehci_hcd_au1xxx_drv_remove(struct platform_device *pdev) usb_remove_hcd(hcd); alchemy_usb_control(ALCHEMY_USB_EHCI0, 0); - iounmap(hcd->regs); - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); usb_put_hcd(hcd); platform_set_drvdata(pdev, NULL); diff --git a/drivers/usb/host/ehci-cns3xxx.c b/drivers/usb/host/ehci-cns3xxx.c index caaa3e5be334..d91708d2e729 100644 --- a/drivers/usb/host/ehci-cns3xxx.c +++ b/drivers/usb/host/ehci-cns3xxx.c @@ -105,27 +105,17 @@ static int cns3xxx_ehci_probe(struct platform_device *pdev) hcd->rsrc_start = res->start; hcd->rsrc_len = resource_size(res); - if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, - driver->description)) { - dev_dbg(dev, "controller already in use\n"); - retval = -EBUSY; - goto err1; - } - - hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); + hcd->regs = devm_request_and_ioremap(&pdev->dev, res); if (hcd->regs == NULL) { dev_dbg(dev, "error mapping memory\n"); retval = -EFAULT; - goto err2; + goto err1; } retval = usb_add_hcd(hcd, irq, IRQF_SHARED); if (retval == 0) return retval; - iounmap(hcd->regs); -err2: - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); err1: usb_put_hcd(hcd); @@ -137,8 +127,6 @@ static int cns3xxx_ehci_remove(struct platform_device *pdev) struct usb_hcd *hcd = platform_get_drvdata(pdev); usb_remove_hcd(hcd); - iounmap(hcd->regs); - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); /* * EHCI and OHCI share the same clock and power, diff --git a/drivers/usb/host/ehci-dbg.c b/drivers/usb/host/ehci-dbg.c index f0c00de035ef..1599806e3d47 100644 --- a/drivers/usb/host/ehci-dbg.c +++ b/drivers/usb/host/ehci-dbg.c @@ -653,10 +653,8 @@ static ssize_t fill_periodic_buffer(struct debug_buffer *buf) seen [seen_count++].qh = p.qh; } else temp = 0; - if (p.qh) { - tag = Q_NEXT_TYPE(ehci, hw->hw_next); - p = p.qh->qh_next; - } + tag = Q_NEXT_TYPE(ehci, hw->hw_next); + p = p.qh->qh_next; break; case Q_TYPE_FSTN: temp = scnprintf (next, size, diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index b7451b29c5ac..9bfde82078ec 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -210,11 +210,11 @@ static void usb_hcd_fsl_remove(struct usb_hcd *hcd, usb_put_hcd(hcd); } -static void ehci_fsl_setup_phy(struct usb_hcd *hcd, +static int ehci_fsl_setup_phy(struct usb_hcd *hcd, enum fsl_usb2_phy_modes phy_mode, unsigned int port_offset) { - u32 portsc, temp; + u32 portsc; struct ehci_hcd *ehci = hcd_to_ehci(hcd); void __iomem *non_ehci = hcd->regs; struct device *dev = hcd->self.controller; @@ -232,9 +232,15 @@ static void ehci_fsl_setup_phy(struct usb_hcd *hcd, case FSL_USB2_PHY_ULPI: if (pdata->controller_ver) { /* controller version 1.6 or above */ - temp = in_be32(non_ehci + FSL_SOC_USB_CTRL); - out_be32(non_ehci + FSL_SOC_USB_CTRL, temp | - USB_CTRL_USB_EN | ULPI_PHY_CLK_SEL); + setbits32(non_ehci + FSL_SOC_USB_CTRL, + ULPI_PHY_CLK_SEL); + /* + * Due to controller issue of PHY_CLK_VALID in ULPI + * mode, we set USB_CTRL_USB_EN before checking + * PHY_CLK_VALID, otherwise PHY_CLK_VALID doesn't work. + */ + clrsetbits_be32(non_ehci + FSL_SOC_USB_CTRL, + UTMI_PHY_EN, USB_CTRL_USB_EN); } portsc |= PORT_PTS_ULPI; break; @@ -247,9 +253,7 @@ static void ehci_fsl_setup_phy(struct usb_hcd *hcd, case FSL_USB2_PHY_UTMI: if (pdata->controller_ver) { /* controller version 1.6 or above */ - temp = in_be32(non_ehci + FSL_SOC_USB_CTRL); - out_be32(non_ehci + FSL_SOC_USB_CTRL, temp | - UTMI_PHY_EN | USB_CTRL_USB_EN); + setbits32(non_ehci + FSL_SOC_USB_CTRL, UTMI_PHY_EN); mdelay(FSL_UTMI_PHY_DLY); /* Delay for UTMI PHY CLK to become stable - 10ms*/ } @@ -262,23 +266,33 @@ static void ehci_fsl_setup_phy(struct usb_hcd *hcd, case FSL_USB2_PHY_NONE: break; } + + if (pdata->controller_ver && (phy_mode == FSL_USB2_PHY_ULPI)) { + /* check PHY_CLK_VALID to get phy clk valid */ + if (!spin_event_timeout(in_be32(non_ehci + FSL_SOC_USB_CTRL) & + PHY_CLK_VALID, FSL_USB_PHY_CLK_TIMEOUT, 0)) { + printk(KERN_WARNING "fsl-ehci: USB PHY clock invalid\n"); + return -EINVAL; + } + } + ehci_writel(ehci, portsc, &ehci->regs->port_status[port_offset]); + + if (phy_mode != FSL_USB2_PHY_ULPI) + setbits32(non_ehci + FSL_SOC_USB_CTRL, USB_CTRL_USB_EN); + + return 0; } -static void ehci_fsl_usb_setup(struct ehci_hcd *ehci) +static int ehci_fsl_usb_setup(struct ehci_hcd *ehci) { struct usb_hcd *hcd = ehci_to_hcd(ehci); struct fsl_usb2_platform_data *pdata; void __iomem *non_ehci = hcd->regs; - u32 temp; pdata = hcd->self.controller->platform_data; - /* Enable PHY interface in the control reg. */ if (pdata->have_sysif_regs) { - temp = in_be32(non_ehci + FSL_SOC_USB_CTRL); - out_be32(non_ehci + FSL_SOC_USB_CTRL, temp | 0x00000004); - /* * Turn on cache snooping hardware, since some PowerPC platforms * wholly rely on hardware to deal with cache coherent @@ -293,7 +307,8 @@ static void ehci_fsl_usb_setup(struct ehci_hcd *ehci) if ((pdata->operating_mode == FSL_USB2_DR_HOST) || (pdata->operating_mode == FSL_USB2_DR_OTG)) - ehci_fsl_setup_phy(hcd, pdata->phy_mode, 0); + if (ehci_fsl_setup_phy(hcd, pdata->phy_mode, 0)) + return -EINVAL; if (pdata->operating_mode == FSL_USB2_MPH_HOST) { unsigned int chip, rev, svr; @@ -307,9 +322,12 @@ static void ehci_fsl_usb_setup(struct ehci_hcd *ehci) ehci->has_fsl_port_bug = 1; if (pdata->port_enables & FSL_USB2_PORT0_ENABLED) - ehci_fsl_setup_phy(hcd, pdata->phy_mode, 0); + if (ehci_fsl_setup_phy(hcd, pdata->phy_mode, 0)) + return -EINVAL; + if (pdata->port_enables & FSL_USB2_PORT1_ENABLED) - ehci_fsl_setup_phy(hcd, pdata->phy_mode, 1); + if (ehci_fsl_setup_phy(hcd, pdata->phy_mode, 1)) + return -EINVAL; } if (pdata->have_sysif_regs) { @@ -322,12 +340,15 @@ static void ehci_fsl_usb_setup(struct ehci_hcd *ehci) #endif out_be32(non_ehci + FSL_SOC_USB_SICTRL, 0x00000001); } + + return 0; } /* called after powerup, by probe or system-pm "wakeup" */ static int ehci_fsl_reinit(struct ehci_hcd *ehci) { - ehci_fsl_usb_setup(ehci); + if (ehci_fsl_usb_setup(ehci)) + return -EINVAL; ehci_port_power(ehci, 0); return 0; diff --git a/drivers/usb/host/ehci-fsl.h b/drivers/usb/host/ehci-fsl.h index 88403684d10b..dbd292e9f0a7 100644 --- a/drivers/usb/host/ehci-fsl.h +++ b/drivers/usb/host/ehci-fsl.h @@ -61,4 +61,5 @@ #define PLL_RESET (1<<8) #define UTMI_PHY_EN (1<<9) #define ULPI_PHY_CLK_SEL (1<<10) +#define PHY_CLK_VALID (1<<17) #endif /* _EHCI_FSL_H */ diff --git a/drivers/usb/host/ehci-grlib.c b/drivers/usb/host/ehci-grlib.c index 22ca45c079a4..3180cb3624d9 100644 --- a/drivers/usb/host/ehci-grlib.c +++ b/drivers/usb/host/ehci-grlib.c @@ -127,12 +127,6 @@ static int __devinit ehci_hcd_grlib_probe(struct platform_device *op) hcd->rsrc_start = res.start; hcd->rsrc_len = resource_size(&res); - if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { - printk(KERN_ERR "%s: request_mem_region failed\n", __FILE__); - rv = -EBUSY; - goto err_rmr; - } - irq = irq_of_parse_and_map(dn, 0); if (irq == NO_IRQ) { printk(KERN_ERR "%s: irq_of_parse_and_map failed\n", __FILE__); @@ -140,9 +134,9 @@ static int __devinit ehci_hcd_grlib_probe(struct platform_device *op) goto err_irq; } - hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); + hcd->regs = devm_request_and_ioremap(&op->dev, &res); if (!hcd->regs) { - printk(KERN_ERR "%s: ioremap failed\n", __FILE__); + pr_err("%s: devm_request_and_ioremap failed\n", __FILE__); rv = -ENOMEM; goto err_ioremap; } @@ -161,17 +155,13 @@ static int __devinit ehci_hcd_grlib_probe(struct platform_device *op) rv = usb_add_hcd(hcd, irq, 0); if (rv) - goto err_ehci; + goto err_ioremap; return 0; -err_ehci: - iounmap(hcd->regs); err_ioremap: irq_dispose_mapping(irq); err_irq: - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); -err_rmr: usb_put_hcd(hcd); return rv; @@ -188,9 +178,7 @@ static int ehci_hcd_grlib_remove(struct platform_device *op) usb_remove_hcd(hcd); - iounmap(hcd->regs); irq_dispose_mapping(hcd->irq); - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); usb_put_hcd(hcd); diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index b05c6865b610..6bf6c42481e8 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -228,7 +228,7 @@ static int ehci_reset (struct ehci_hcd *ehci) /* If the EHCI debug controller is active, special care must be * taken before and after a host controller reset */ - if (ehci->debug && !dbgp_reset_prep()) + if (ehci->debug && !dbgp_reset_prep(ehci_to_hcd(ehci))) ehci->debug = NULL; command |= CMD_RESET; @@ -251,7 +251,7 @@ static int ehci_reset (struct ehci_hcd *ehci) tdi_reset (ehci); if (ehci->debug) - dbgp_external_startup(); + dbgp_external_startup(ehci_to_hcd(ehci)); ehci->port_c_suspend = ehci->suspended_ports = ehci->resuming_ports = 0; diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index c7880223738a..914ce9370e70 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -353,10 +353,10 @@ static int ehci_bus_resume (struct usb_hcd *hcd) goto shutdown; if (unlikely(ehci->debug)) { - if (!dbgp_reset_prep()) + if (!dbgp_reset_prep(hcd)) ehci->debug = NULL; else - dbgp_external_startup(); + dbgp_external_startup(hcd); } /* Ideally and we've got a real resume here, and no port's power diff --git a/drivers/usb/host/ehci-ixp4xx.c b/drivers/usb/host/ehci-ixp4xx.c index 488d401942e9..f224c0a48bed 100644 --- a/drivers/usb/host/ehci-ixp4xx.c +++ b/drivers/usb/host/ehci-ixp4xx.c @@ -98,30 +98,19 @@ static int ixp4xx_ehci_probe(struct platform_device *pdev) hcd->rsrc_start = res->start; hcd->rsrc_len = resource_size(res); - if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, - driver->description)) { - dev_dbg(&pdev->dev, "controller already in use\n"); - retval = -EBUSY; - goto fail_request_resource; - } - - hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len); + hcd->regs = devm_request_and_ioremap(&pdev->dev, res); if (hcd->regs == NULL) { dev_dbg(&pdev->dev, "error mapping memory\n"); retval = -EFAULT; - goto fail_ioremap; + goto fail_request_resource; } retval = usb_add_hcd(hcd, irq, IRQF_SHARED); if (retval) - goto fail_add_hcd; + goto fail_request_resource; return retval; -fail_add_hcd: - iounmap(hcd->regs); -fail_ioremap: - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); fail_request_resource: usb_put_hcd(hcd); fail_create_hcd: @@ -134,8 +123,6 @@ static int ixp4xx_ehci_remove(struct platform_device *pdev) struct usb_hcd *hcd = platform_get_drvdata(pdev); usb_remove_hcd(hcd); - iounmap(hcd->regs); - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); usb_put_hcd(hcd); return 0; diff --git a/drivers/usb/host/ehci-ls1x.c b/drivers/usb/host/ehci-ls1x.c index a283e59709d6..ca759652626b 100644 --- a/drivers/usb/host/ehci-ls1x.c +++ b/drivers/usb/host/ehci-ls1x.c @@ -106,29 +106,19 @@ static int ehci_hcd_ls1x_probe(struct platform_device *pdev) hcd->rsrc_start = res->start; hcd->rsrc_len = resource_size(res); - if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { - dev_dbg(&pdev->dev, "controller already in use\n"); - ret = -EBUSY; - goto err_put_hcd; - } - - hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); + hcd->regs = devm_request_and_ioremap(&pdev->dev, res); if (hcd->regs == NULL) { dev_dbg(&pdev->dev, "error mapping memory\n"); ret = -EFAULT; - goto err_release_region; + goto err_put_hcd; } - ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED); + ret = usb_add_hcd(hcd, irq, IRQF_SHARED); if (ret) - goto err_iounmap; + goto err_put_hcd; return ret; -err_iounmap: - iounmap(hcd->regs); -err_release_region: - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); err_put_hcd: usb_put_hcd(hcd); return ret; @@ -139,8 +129,6 @@ static int ehci_hcd_ls1x_remove(struct platform_device *pdev) struct usb_hcd *hcd = platform_get_drvdata(pdev); usb_remove_hcd(hcd); - iounmap(hcd->regs); - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); usb_put_hcd(hcd); return 0; diff --git a/drivers/usb/host/ehci-msm.c b/drivers/usb/host/ehci-msm.c index 17dd9e94001e..4af4dc5b618c 100644 --- a/drivers/usb/host/ehci-msm.c +++ b/drivers/usb/host/ehci-msm.c @@ -133,7 +133,7 @@ static int ehci_msm_probe(struct platform_device *pdev) hcd->rsrc_start = res->start; hcd->rsrc_len = resource_size(res); - hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); + hcd->regs = devm_ioremap(&pdev->dev, hcd->rsrc_start, hcd->rsrc_len); if (!hcd->regs) { dev_err(&pdev->dev, "ioremap failed\n"); ret = -ENOMEM; @@ -145,17 +145,17 @@ static int ehci_msm_probe(struct platform_device *pdev) * powering up VBUS, mapping of registers address space and power * management. */ - phy = usb_get_phy(USB_PHY_TYPE_USB2); + phy = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2); if (IS_ERR_OR_NULL(phy)) { dev_err(&pdev->dev, "unable to find transceiver\n"); ret = -ENODEV; - goto unmap; + goto put_hcd; } ret = otg_set_host(phy->otg, &hcd->self); if (ret < 0) { dev_err(&pdev->dev, "unable to register with transceiver\n"); - goto put_transceiver; + goto put_hcd; } device_init_wakeup(&pdev->dev, 1); @@ -168,10 +168,6 @@ static int ehci_msm_probe(struct platform_device *pdev) return 0; -put_transceiver: - usb_put_phy(phy); -unmap: - iounmap(hcd->regs); put_hcd: usb_put_hcd(hcd); @@ -187,7 +183,6 @@ static int __devexit ehci_msm_remove(struct platform_device *pdev) pm_runtime_set_suspended(&pdev->dev); otg_set_host(phy->otg, NULL); - usb_put_phy(phy); usb_put_hcd(hcd); diff --git a/drivers/usb/host/ehci-mv.c b/drivers/usb/host/ehci-mv.c index f6df1ccc9617..f7bfc0b898b9 100644 --- a/drivers/usb/host/ehci-mv.c +++ b/drivers/usb/host/ehci-mv.c @@ -161,7 +161,7 @@ static int mv_ehci_probe(struct platform_device *pdev) return -ENOMEM; size = sizeof(*ehci_mv) + sizeof(struct clk *) * pdata->clknum; - ehci_mv = kzalloc(size, GFP_KERNEL); + ehci_mv = devm_kzalloc(&pdev->dev, size, GFP_KERNEL); if (ehci_mv == NULL) { dev_err(&pdev->dev, "cannot allocate ehci_hcd_mv\n"); retval = -ENOMEM; @@ -175,12 +175,12 @@ static int mv_ehci_probe(struct platform_device *pdev) ehci_mv->clknum = pdata->clknum; for (clk_i = 0; clk_i < ehci_mv->clknum; clk_i++) { ehci_mv->clk[clk_i] = - clk_get(&pdev->dev, pdata->clkname[clk_i]); + devm_clk_get(&pdev->dev, pdata->clkname[clk_i]); if (IS_ERR(ehci_mv->clk[clk_i])) { dev_err(&pdev->dev, "error get clck \"%s\"\n", pdata->clkname[clk_i]); retval = PTR_ERR(ehci_mv->clk[clk_i]); - goto err_put_clk; + goto err_clear_drvdata; } } @@ -188,34 +188,36 @@ static int mv_ehci_probe(struct platform_device *pdev) if (r == NULL) { dev_err(&pdev->dev, "no phy I/O memory resource defined\n"); retval = -ENODEV; - goto err_put_clk; + goto err_clear_drvdata; } - ehci_mv->phy_regs = ioremap(r->start, resource_size(r)); + ehci_mv->phy_regs = devm_ioremap(&pdev->dev, r->start, + resource_size(r)); if (ehci_mv->phy_regs == 0) { dev_err(&pdev->dev, "failed to map phy I/O memory\n"); retval = -EFAULT; - goto err_put_clk; + goto err_clear_drvdata; } r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "capregs"); if (!r) { dev_err(&pdev->dev, "no I/O memory resource defined\n"); retval = -ENODEV; - goto err_iounmap_phyreg; + goto err_clear_drvdata; } - ehci_mv->cap_regs = ioremap(r->start, resource_size(r)); + ehci_mv->cap_regs = devm_ioremap(&pdev->dev, r->start, + resource_size(r)); if (ehci_mv->cap_regs == NULL) { dev_err(&pdev->dev, "failed to map I/O memory\n"); retval = -EFAULT; - goto err_iounmap_phyreg; + goto err_clear_drvdata; } retval = mv_ehci_enable(ehci_mv); if (retval) { dev_err(&pdev->dev, "init phy error %d\n", retval); - goto err_iounmap_capreg; + goto err_clear_drvdata; } offset = readl(ehci_mv->cap_regs) & CAPLENGTH_MASK; @@ -239,7 +241,7 @@ static int mv_ehci_probe(struct platform_device *pdev) ehci_mv->mode = pdata->mode; if (ehci_mv->mode == MV_USB_MODE_OTG) { #ifdef CONFIG_USB_OTG_UTILS - ehci_mv->otg = usb_get_phy(USB_PHY_TYPE_USB2); + ehci_mv->otg = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2); if (IS_ERR_OR_NULL(ehci_mv->otg)) { dev_err(&pdev->dev, "unable to find transceiver\n"); @@ -252,7 +254,7 @@ static int mv_ehci_probe(struct platform_device *pdev) dev_err(&pdev->dev, "unable to register with transceiver\n"); retval = -ENODEV; - goto err_put_transceiver; + goto err_disable_clk; } /* otg will enable clock before use as host */ mv_ehci_disable(ehci_mv); @@ -286,22 +288,10 @@ static int mv_ehci_probe(struct platform_device *pdev) err_set_vbus: if (pdata->set_vbus) pdata->set_vbus(0); -#ifdef CONFIG_USB_OTG_UTILS -err_put_transceiver: - if (!IS_ERR_OR_NULL(ehci_mv->otg)) - usb_put_phy(ehci_mv->otg); -#endif err_disable_clk: mv_ehci_disable(ehci_mv); -err_iounmap_capreg: - iounmap(ehci_mv->cap_regs); -err_iounmap_phyreg: - iounmap(ehci_mv->phy_regs); -err_put_clk: - for (clk_i--; clk_i >= 0; clk_i--) - clk_put(ehci_mv->clk[clk_i]); +err_clear_drvdata: platform_set_drvdata(pdev, NULL); - kfree(ehci_mv); err_put_hcd: usb_put_hcd(hcd); @@ -317,10 +307,8 @@ static int mv_ehci_remove(struct platform_device *pdev) if (hcd->rh_registered) usb_remove_hcd(hcd); - if (!IS_ERR_OR_NULL(ehci_mv->otg)) { + if (!IS_ERR_OR_NULL(ehci_mv->otg)) otg_set_host(ehci_mv->otg->otg, NULL); - usb_put_phy(ehci_mv->otg); - } if (ehci_mv->mode == MV_USB_MODE_HOST) { if (ehci_mv->pdata->set_vbus) @@ -329,15 +317,8 @@ static int mv_ehci_remove(struct platform_device *pdev) mv_ehci_disable(ehci_mv); } - iounmap(ehci_mv->cap_regs); - iounmap(ehci_mv->phy_regs); - - for (clk_i = 0; clk_i < ehci_mv->clknum; clk_i++) - clk_put(ehci_mv->clk[clk_i]); - platform_set_drvdata(pdev, NULL); - kfree(ehci_mv); usb_put_hcd(hcd); return 0; diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c index 34201372c85f..959e1a4c3491 100644 --- a/drivers/usb/host/ehci-mxc.c +++ b/drivers/usb/host/ehci-mxc.c @@ -121,7 +121,7 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev) if (!hcd) return -ENOMEM; - priv = kzalloc(sizeof(*priv), GFP_KERNEL); + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); if (!priv) { ret = -ENOMEM; goto err_alloc; @@ -131,34 +131,28 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev) if (!res) { dev_err(dev, "Found HC with no register addr. Check setup!\n"); ret = -ENODEV; - goto err_get_resource; + goto err_alloc; } hcd->rsrc_start = res->start; hcd->rsrc_len = resource_size(res); - if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { - dev_dbg(dev, "controller already in use\n"); - ret = -EBUSY; - goto err_request_mem; - } - - hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); + hcd->regs = devm_request_and_ioremap(&pdev->dev, res); if (!hcd->regs) { dev_err(dev, "error mapping memory\n"); ret = -EFAULT; - goto err_ioremap; + goto err_alloc; } /* enable clocks */ - priv->usbclk = clk_get(dev, "ipg"); + priv->usbclk = devm_clk_get(&pdev->dev, "ipg"); if (IS_ERR(priv->usbclk)) { ret = PTR_ERR(priv->usbclk); - goto err_clk; + goto err_alloc; } clk_prepare_enable(priv->usbclk); - priv->ahbclk = clk_get(dev, "ahb"); + priv->ahbclk = devm_clk_get(&pdev->dev, "ahb"); if (IS_ERR(priv->ahbclk)) { ret = PTR_ERR(priv->ahbclk); goto err_clk_ahb; @@ -166,7 +160,7 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev) clk_prepare_enable(priv->ahbclk); /* "dr" device has its own clock on i.MX51 */ - priv->phyclk = clk_get(dev, "phy"); + priv->phyclk = devm_clk_get(&pdev->dev, "phy"); if (IS_ERR(priv->phyclk)) priv->phyclk = NULL; if (priv->phyclk) @@ -245,23 +239,12 @@ err_add: if (pdata && pdata->exit) pdata->exit(pdev); err_init: - if (priv->phyclk) { + if (priv->phyclk) clk_disable_unprepare(priv->phyclk); - clk_put(priv->phyclk); - } clk_disable_unprepare(priv->ahbclk); - clk_put(priv->ahbclk); err_clk_ahb: clk_disable_unprepare(priv->usbclk); - clk_put(priv->usbclk); -err_clk: - iounmap(hcd->regs); -err_ioremap: - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); -err_request_mem: -err_get_resource: - kfree(priv); err_alloc: usb_put_hcd(hcd); return ret; @@ -280,22 +263,14 @@ static int __exit ehci_mxc_drv_remove(struct platform_device *pdev) usb_phy_shutdown(pdata->otg); usb_remove_hcd(hcd); - iounmap(hcd->regs); - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); usb_put_hcd(hcd); platform_set_drvdata(pdev, NULL); clk_disable_unprepare(priv->usbclk); - clk_put(priv->usbclk); clk_disable_unprepare(priv->ahbclk); - clk_put(priv->ahbclk); - if (priv->phyclk) { + if (priv->phyclk) clk_disable_unprepare(priv->phyclk); - clk_put(priv->phyclk); - } - - kfree(priv); return 0; } diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c index 4b1d896d5a22..764e0100b6f4 100644 --- a/drivers/usb/host/ehci-platform.c +++ b/drivers/usb/host/ehci-platform.c @@ -82,10 +82,14 @@ static int __devinit ehci_platform_probe(struct platform_device *dev) { struct usb_hcd *hcd; struct resource *res_mem; + struct usb_ehci_pdata *pdata = dev->dev.platform_data; int irq; int err = -ENOMEM; - BUG_ON(!dev->dev.platform_data); + if (!pdata) { + WARN_ON(1); + return -ENODEV; + } if (usb_disabled()) return -ENODEV; @@ -101,10 +105,18 @@ static int __devinit ehci_platform_probe(struct platform_device *dev) return -ENXIO; } + if (pdata->power_on) { + err = pdata->power_on(dev); + if (err < 0) + return err; + } + hcd = usb_create_hcd(&ehci_platform_hc_driver, &dev->dev, dev_name(&dev->dev)); - if (!hcd) - return -ENOMEM; + if (!hcd) { + err = -ENOMEM; + goto err_power; + } hcd->rsrc_start = res_mem->start; hcd->rsrc_len = resource_size(res_mem); @@ -116,8 +128,10 @@ static int __devinit ehci_platform_probe(struct platform_device *dev) } hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len); - if (!hcd->regs) + if (!hcd->regs) { + err = -ENOMEM; goto err_release_region; + } err = usb_add_hcd(hcd, irq, IRQF_SHARED); if (err) goto err_iounmap; @@ -132,12 +146,17 @@ err_release_region: release_mem_region(hcd->rsrc_start, hcd->rsrc_len); err_put_hcd: usb_put_hcd(hcd); +err_power: + if (pdata->power_off) + pdata->power_off(dev); + return err; } static int __devexit ehci_platform_remove(struct platform_device *dev) { struct usb_hcd *hcd = platform_get_drvdata(dev); + struct usb_ehci_pdata *pdata = dev->dev.platform_data; usb_remove_hcd(hcd); iounmap(hcd->regs); @@ -145,6 +164,9 @@ static int __devexit ehci_platform_remove(struct platform_device *dev) usb_put_hcd(hcd); platform_set_drvdata(dev, NULL); + if (pdata->power_off) + pdata->power_off(dev); + return 0; } @@ -153,14 +175,32 @@ static int __devexit ehci_platform_remove(struct platform_device *dev) static int ehci_platform_suspend(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); + struct usb_ehci_pdata *pdata = dev->platform_data; + struct platform_device *pdev = + container_of(dev, struct platform_device, dev); bool do_wakeup = device_may_wakeup(dev); + int ret; + + ret = ehci_suspend(hcd, do_wakeup); - return ehci_suspend(hcd, do_wakeup); + if (pdata->power_suspend) + pdata->power_suspend(pdev); + + return ret; } static int ehci_platform_resume(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); + struct usb_ehci_pdata *pdata = dev->platform_data; + struct platform_device *pdev = + container_of(dev, struct platform_device, dev); + + if (pdata->power_on) { + int err = pdata->power_on(pdev); + if (err < 0) + return err; + } ehci_resume(hcd, false); return 0; diff --git a/drivers/usb/host/ehci-ppc-of.c b/drivers/usb/host/ehci-ppc-of.c index bbbe89dfd886..fa937d05a02b 100644 --- a/drivers/usb/host/ehci-ppc-of.c +++ b/drivers/usb/host/ehci-ppc-of.c @@ -114,12 +114,6 @@ static int __devinit ehci_hcd_ppc_of_probe(struct platform_device *op) hcd->rsrc_start = res.start; hcd->rsrc_len = resource_size(&res); - if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { - printk(KERN_ERR "%s: request_mem_region failed\n", __FILE__); - rv = -EBUSY; - goto err_rmr; - } - irq = irq_of_parse_and_map(dn, 0); if (irq == NO_IRQ) { printk(KERN_ERR "%s: irq_of_parse_and_map failed\n", __FILE__); @@ -127,9 +121,9 @@ static int __devinit ehci_hcd_ppc_of_probe(struct platform_device *op) goto err_irq; } - hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); + hcd->regs = devm_request_and_ioremap(&op->dev, &res); if (!hcd->regs) { - printk(KERN_ERR "%s: ioremap failed\n", __FILE__); + pr_err("%s: devm_request_and_ioremap failed\n", __FILE__); rv = -ENOMEM; goto err_ioremap; } @@ -139,8 +133,10 @@ static int __devinit ehci_hcd_ppc_of_probe(struct platform_device *op) if (np != NULL) { /* claim we really affected by usb23 erratum */ if (!of_address_to_resource(np, 0, &res)) - ehci->ohci_hcctrl_reg = ioremap(res.start + - OHCI_HCCTRL_OFFSET, OHCI_HCCTRL_LEN); + ehci->ohci_hcctrl_reg = + devm_ioremap(&op->dev, + res.start + OHCI_HCCTRL_OFFSET, + OHCI_HCCTRL_LEN); else pr_debug("%s: no ohci offset in fdt\n", __FILE__); if (!ehci->ohci_hcctrl_reg) { @@ -169,19 +165,13 @@ static int __devinit ehci_hcd_ppc_of_probe(struct platform_device *op) rv = usb_add_hcd(hcd, irq, 0); if (rv) - goto err_ehci; + goto err_ioremap; return 0; -err_ehci: - if (ehci->has_amcc_usb23) - iounmap(ehci->ohci_hcctrl_reg); - iounmap(hcd->regs); err_ioremap: irq_dispose_mapping(irq); err_irq: - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); -err_rmr: usb_put_hcd(hcd); return rv; @@ -202,9 +192,7 @@ static int ehci_hcd_ppc_of_remove(struct platform_device *op) usb_remove_hcd(hcd); - iounmap(hcd->regs); irq_dispose_mapping(hcd->irq); - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); /* use request_mem_region to test if the ohci driver is loaded. if so * ensure the ohci core is operational. @@ -222,8 +210,6 @@ static int ehci_hcd_ppc_of_remove(struct platform_device *op) pr_debug("%s: no ohci offset in fdt\n", __FILE__); of_node_put(np); } - - iounmap(ehci->ohci_hcctrl_reg); } usb_put_hcd(hcd); diff --git a/drivers/usb/host/ehci-s5p.c b/drivers/usb/host/ehci-s5p.c index 9d8f1dd57cb3..d055503e4183 100644 --- a/drivers/usb/host/ehci-s5p.c +++ b/drivers/usb/host/ehci-s5p.c @@ -128,7 +128,7 @@ static int __devinit s5p_ehci_probe(struct platform_device *pdev) } s5p_ehci->hcd = hcd; - s5p_ehci->clk = clk_get(&pdev->dev, "usbhost"); + s5p_ehci->clk = devm_clk_get(&pdev->dev, "usbhost"); if (IS_ERR(s5p_ehci->clk)) { dev_err(&pdev->dev, "Failed to get usbhost clock\n"); @@ -138,7 +138,7 @@ static int __devinit s5p_ehci_probe(struct platform_device *pdev) err = clk_enable(s5p_ehci->clk); if (err) - goto fail_clken; + goto fail_clk; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { @@ -184,8 +184,6 @@ static int __devinit s5p_ehci_probe(struct platform_device *pdev) fail_io: clk_disable(s5p_ehci->clk); -fail_clken: - clk_put(s5p_ehci->clk); fail_clk: usb_put_hcd(hcd); return err; @@ -203,7 +201,6 @@ static int __devexit s5p_ehci_remove(struct platform_device *pdev) pdata->phy_exit(pdev, S5P_USB_PHY_HOST); clk_disable(s5p_ehci->clk); - clk_put(s5p_ehci->clk); usb_put_hcd(hcd); diff --git a/drivers/usb/host/ehci-sead3.c b/drivers/usb/host/ehci-sead3.c index 0c9e43cfaff5..efad02d947f2 100644 --- a/drivers/usb/host/ehci-sead3.c +++ b/drivers/usb/host/ehci-sead3.c @@ -112,17 +112,11 @@ static int ehci_hcd_sead3_drv_probe(struct platform_device *pdev) hcd->rsrc_start = res->start; hcd->rsrc_len = resource_size(res); - if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { - pr_debug("request_mem_region failed"); - ret = -EBUSY; - goto err1; - } - - hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); + hcd->regs = devm_request_and_ioremap(&pdev->dev, res); if (!hcd->regs) { pr_debug("ioremap failed"); ret = -ENOMEM; - goto err2; + goto err1; } /* Root hub has integrated TT. */ @@ -135,9 +129,6 @@ static int ehci_hcd_sead3_drv_probe(struct platform_device *pdev) return ret; } - iounmap(hcd->regs); -err2: - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); err1: usb_put_hcd(hcd); return ret; @@ -148,8 +139,6 @@ static int ehci_hcd_sead3_drv_remove(struct platform_device *pdev) struct usb_hcd *hcd = platform_get_drvdata(pdev); usb_remove_hcd(hcd); - iounmap(hcd->regs); - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); usb_put_hcd(hcd); platform_set_drvdata(pdev, NULL); diff --git a/drivers/usb/host/ehci-sh.c b/drivers/usb/host/ehci-sh.c index b3f1e3650da0..6081e1ed3ac9 100644 --- a/drivers/usb/host/ehci-sh.c +++ b/drivers/usb/host/ehci-sh.c @@ -125,33 +125,27 @@ static int ehci_hcd_sh_probe(struct platform_device *pdev) hcd->rsrc_start = res->start; hcd->rsrc_len = resource_size(res); - if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, - driver->description)) { - dev_dbg(&pdev->dev, "controller already in use\n"); - ret = -EBUSY; - goto fail_request_resource; - } - - hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len); + hcd->regs = devm_request_and_ioremap(&pdev->dev, res); if (hcd->regs == NULL) { dev_dbg(&pdev->dev, "error mapping memory\n"); ret = -ENXIO; - goto fail_ioremap; + goto fail_request_resource; } - priv = kmalloc(sizeof(struct ehci_sh_priv), GFP_KERNEL); + priv = devm_kzalloc(&pdev->dev, sizeof(struct ehci_sh_priv), + GFP_KERNEL); if (!priv) { dev_dbg(&pdev->dev, "error allocating priv data\n"); ret = -ENOMEM; - goto fail_alloc; + goto fail_request_resource; } /* These are optional, we don't care if they fail */ - priv->fclk = clk_get(&pdev->dev, "usb_fck"); + priv->fclk = devm_clk_get(&pdev->dev, "usb_fck"); if (IS_ERR(priv->fclk)) priv->fclk = NULL; - priv->iclk = clk_get(&pdev->dev, "usb_ick"); + priv->iclk = devm_clk_get(&pdev->dev, "usb_ick"); if (IS_ERR(priv->iclk)) priv->iclk = NULL; @@ -176,14 +170,6 @@ fail_add_hcd: clk_disable(priv->iclk); clk_disable(priv->fclk); - clk_put(priv->iclk); - clk_put(priv->fclk); - - kfree(priv); -fail_alloc: - iounmap(hcd->regs); -fail_ioremap: - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); fail_request_resource: usb_put_hcd(hcd); fail_create_hcd: @@ -198,19 +184,12 @@ static int __exit ehci_hcd_sh_remove(struct platform_device *pdev) struct usb_hcd *hcd = priv->hcd; usb_remove_hcd(hcd); - iounmap(hcd->regs); - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); usb_put_hcd(hcd); platform_set_drvdata(pdev, NULL); clk_disable(priv->fclk); clk_disable(priv->iclk); - clk_put(priv->fclk); - clk_put(priv->iclk); - - kfree(priv); - return 0; } diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index 26dedb30ad0b..6223d1757848 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -27,7 +27,7 @@ #include <linux/of_gpio.h> #include <linux/pm_runtime.h> -#include <mach/usb_phy.h> +#include <linux/usb/tegra_usb_phy.h> #include <mach/iomap.h> #define TEGRA_USB_DMA_ALIGN 32 @@ -49,7 +49,7 @@ static void tegra_ehci_power_up(struct usb_hcd *hcd) clk_prepare_enable(tegra->emc_clk); clk_prepare_enable(tegra->clk); - tegra_usb_phy_power_on(tegra->phy); + usb_phy_set_suspend(&tegra->phy->u_phy, 0); tegra->host_resumed = 1; } @@ -58,7 +58,7 @@ static void tegra_ehci_power_down(struct usb_hcd *hcd) struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller); tegra->host_resumed = 0; - tegra_usb_phy_power_off(tegra->phy); + usb_phy_set_suspend(&tegra->phy->u_phy, 1); clk_disable_unprepare(tegra->clk); clk_disable_unprepare(tegra->emc_clk); } @@ -634,7 +634,8 @@ static int tegra_ehci_probe(struct platform_device *pdev) setup_vbus_gpio(pdev, pdata); - tegra = kzalloc(sizeof(struct tegra_ehci_hcd), GFP_KERNEL); + tegra = devm_kzalloc(&pdev->dev, sizeof(struct tegra_ehci_hcd), + GFP_KERNEL); if (!tegra) return -ENOMEM; @@ -642,13 +643,12 @@ static int tegra_ehci_probe(struct platform_device *pdev) dev_name(&pdev->dev)); if (!hcd) { dev_err(&pdev->dev, "Unable to create HCD\n"); - err = -ENOMEM; - goto fail_hcd; + return -ENOMEM; } platform_set_drvdata(pdev, tegra); - tegra->clk = clk_get(&pdev->dev, NULL); + tegra->clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(tegra->clk)) { dev_err(&pdev->dev, "Can't get ehci clock\n"); err = PTR_ERR(tegra->clk); @@ -657,9 +657,9 @@ static int tegra_ehci_probe(struct platform_device *pdev) err = clk_prepare_enable(tegra->clk); if (err) - goto fail_clken; + goto fail_clk; - tegra->emc_clk = clk_get(&pdev->dev, "emc"); + tegra->emc_clk = devm_clk_get(&pdev->dev, "emc"); if (IS_ERR(tegra->emc_clk)) { dev_err(&pdev->dev, "Can't get emc clock\n"); err = PTR_ERR(tegra->emc_clk); @@ -677,7 +677,7 @@ static int tegra_ehci_probe(struct platform_device *pdev) } hcd->rsrc_start = res->start; hcd->rsrc_len = resource_size(res); - hcd->regs = ioremap(res->start, resource_size(res)); + hcd->regs = devm_ioremap(&pdev->dev, res->start, resource_size(res)); if (!hcd->regs) { dev_err(&pdev->dev, "Failed to remap I/O memory\n"); err = -ENOMEM; @@ -702,7 +702,7 @@ static int tegra_ehci_probe(struct platform_device *pdev) default: err = -ENODEV; dev_err(&pdev->dev, "unknown usb instance\n"); - goto fail_phy; + goto fail_io; } } @@ -712,10 +712,12 @@ static int tegra_ehci_probe(struct platform_device *pdev) if (IS_ERR(tegra->phy)) { dev_err(&pdev->dev, "Failed to open USB phy\n"); err = -ENXIO; - goto fail_phy; + goto fail_io; } - err = tegra_usb_phy_power_on(tegra->phy); + usb_phy_init(&tegra->phy->u_phy); + + err = usb_phy_set_suspend(&tegra->phy->u_phy, 0); if (err) { dev_err(&pdev->dev, "Failed to power on the phy\n"); goto fail; @@ -733,7 +735,8 @@ static int tegra_ehci_probe(struct platform_device *pdev) #ifdef CONFIG_USB_OTG_UTILS if (pdata->operating_mode == TEGRA_USB_OTG) { - tegra->transceiver = usb_get_phy(USB_PHY_TYPE_USB2); + tegra->transceiver = + devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2); if (!IS_ERR_OR_NULL(tegra->transceiver)) otg_set_host(tegra->transceiver->otg, &hcd->self); } @@ -757,25 +760,16 @@ static int tegra_ehci_probe(struct platform_device *pdev) fail: #ifdef CONFIG_USB_OTG_UTILS - if (!IS_ERR_OR_NULL(tegra->transceiver)) { + if (!IS_ERR_OR_NULL(tegra->transceiver)) otg_set_host(tegra->transceiver->otg, NULL); - usb_put_phy(tegra->transceiver); - } #endif - tegra_usb_phy_close(tegra->phy); -fail_phy: - iounmap(hcd->regs); + usb_phy_shutdown(&tegra->phy->u_phy); fail_io: clk_disable_unprepare(tegra->emc_clk); - clk_put(tegra->emc_clk); fail_emc_clk: clk_disable_unprepare(tegra->clk); -fail_clken: - clk_put(tegra->clk); fail_clk: usb_put_hcd(hcd); -fail_hcd: - kfree(tegra); return err; } @@ -792,26 +786,19 @@ static int tegra_ehci_remove(struct platform_device *pdev) pm_runtime_put_noidle(&pdev->dev); #ifdef CONFIG_USB_OTG_UTILS - if (!IS_ERR_OR_NULL(tegra->transceiver)) { + if (!IS_ERR_OR_NULL(tegra->transceiver)) otg_set_host(tegra->transceiver->otg, NULL); - usb_put_phy(tegra->transceiver); - } #endif usb_remove_hcd(hcd); - - tegra_usb_phy_close(tegra->phy); - iounmap(hcd->regs); - usb_put_hcd(hcd); + usb_phy_shutdown(&tegra->phy->u_phy); + clk_disable_unprepare(tegra->clk); - clk_put(tegra->clk); clk_disable_unprepare(tegra->emc_clk); - clk_put(tegra->emc_clk); - kfree(tegra); return 0; } diff --git a/drivers/usb/host/ehci-timer.c b/drivers/usb/host/ehci-timer.c index eb896a2c8f2e..20dbdcbe9b0f 100644 --- a/drivers/usb/host/ehci-timer.c +++ b/drivers/usb/host/ehci-timer.c @@ -118,7 +118,8 @@ static void ehci_poll_ASS(struct ehci_hcd *ehci) ehci_enable_event(ehci, EHCI_HRTIMER_POLL_ASS, true); return; } - ehci_warn(ehci, "Waited too long for the async schedule status, giving up\n"); + ehci_dbg(ehci, "Waited too long for the async schedule status (%x/%x), giving up\n", + want, actual); } ehci->ASS_poll_count = 0; @@ -163,7 +164,8 @@ static void ehci_poll_PSS(struct ehci_hcd *ehci) ehci_enable_event(ehci, EHCI_HRTIMER_POLL_PSS, true); return; } - ehci_warn(ehci, "Waited too long for the periodic schedule status, giving up\n"); + ehci_dbg(ehci, "Waited too long for the periodic schedule status (%x/%x), giving up\n", + want, actual); } ehci->PSS_poll_count = 0; diff --git a/drivers/usb/host/ehci-vt8500.c b/drivers/usb/host/ehci-vt8500.c index 4d147c4e33f5..96722bfebc84 100644 --- a/drivers/usb/host/ehci-vt8500.c +++ b/drivers/usb/host/ehci-vt8500.c @@ -16,6 +16,7 @@ * */ +#include <linux/of.h> #include <linux/platform_device.h> static int ehci_update_device(struct usb_hcd *hcd, struct usb_device *udev) @@ -106,17 +107,11 @@ static int vt8500_ehci_drv_probe(struct platform_device *pdev) hcd->rsrc_start = res->start; hcd->rsrc_len = resource_size(res); - if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { - pr_debug("request_mem_region failed"); - ret = -EBUSY; - goto err1; - } - - hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); + hcd->regs = devm_request_and_ioremap(&pdev->dev, res); if (!hcd->regs) { pr_debug("ioremap failed"); ret = -ENOMEM; - goto err2; + goto err1; } ehci = hcd_to_ehci(hcd); @@ -129,9 +124,6 @@ static int vt8500_ehci_drv_probe(struct platform_device *pdev) return ret; } - iounmap(hcd->regs); -err2: - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); err1: usb_put_hcd(hcd); return ret; @@ -142,14 +134,18 @@ static int vt8500_ehci_drv_remove(struct platform_device *pdev) struct usb_hcd *hcd = platform_get_drvdata(pdev); usb_remove_hcd(hcd); - iounmap(hcd->regs); - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); usb_put_hcd(hcd); platform_set_drvdata(pdev, NULL); return 0; } +static const struct of_device_id vt8500_ehci_ids[] = { + { .compatible = "via,vt8500-ehci", }, + { .compatible = "wm,prizm-ehci", }, + {} +}; + static struct platform_driver vt8500_ehci_driver = { .probe = vt8500_ehci_drv_probe, .remove = vt8500_ehci_drv_remove, @@ -157,7 +153,9 @@ static struct platform_driver vt8500_ehci_driver = { .driver = { .name = "vt8500-ehci", .owner = THIS_MODULE, + .of_match_table = of_match_ptr(vt8500_ehci_ids), } }; MODULE_ALIAS("platform:vt8500-ehci"); +MODULE_DEVICE_TABLE(of, vt8500_ehci_ids); diff --git a/drivers/usb/host/ehci-xilinx-of.c b/drivers/usb/host/ehci-xilinx-of.c index 39f24fa37ebe..6a3f921a5d76 100644 --- a/drivers/usb/host/ehci-xilinx-of.c +++ b/drivers/usb/host/ehci-xilinx-of.c @@ -152,12 +152,6 @@ static int __devinit ehci_hcd_xilinx_of_probe(struct platform_device *op) hcd->rsrc_start = res.start; hcd->rsrc_len = resource_size(&res); - if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { - printk(KERN_ERR "%s: request_mem_region failed\n", __FILE__); - rv = -EBUSY; - goto err_rmr; - } - irq = irq_of_parse_and_map(dn, 0); if (!irq) { printk(KERN_ERR "%s: irq_of_parse_and_map failed\n", __FILE__); @@ -165,11 +159,11 @@ static int __devinit ehci_hcd_xilinx_of_probe(struct platform_device *op) goto err_irq; } - hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); + hcd->regs = devm_request_and_ioremap(&op->dev, &res); if (!hcd->regs) { - printk(KERN_ERR "%s: ioremap failed\n", __FILE__); + pr_err("%s: devm_request_and_ioremap failed\n", __FILE__); rv = -ENOMEM; - goto err_ioremap; + goto err_irq; } ehci = hcd_to_ehci(hcd); @@ -200,12 +194,7 @@ static int __devinit ehci_hcd_xilinx_of_probe(struct platform_device *op) if (rv == 0) return 0; - iounmap(hcd->regs); - -err_ioremap: err_irq: - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); -err_rmr: usb_put_hcd(hcd); return rv; @@ -227,9 +216,6 @@ static int ehci_hcd_xilinx_of_remove(struct platform_device *op) usb_remove_hcd(hcd); - iounmap(hcd->regs); - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); - usb_put_hcd(hcd); return 0; diff --git a/drivers/usb/host/fhci-sched.c b/drivers/usb/host/fhci-sched.c index 2dc8a40e39d7..8f18538e0ff7 100644 --- a/drivers/usb/host/fhci-sched.c +++ b/drivers/usb/host/fhci-sched.c @@ -261,8 +261,7 @@ static void move_head_to_tail(struct list_head *list) struct list_head *node = list->next; if (!list_empty(list)) { - list_del(node); - list_add_tail(node, list); + list_move_tail(node, list); } } diff --git a/drivers/usb/host/fsl-mph-dr-of.c b/drivers/usb/host/fsl-mph-dr-of.c index 22ff6b3a676f..1e771292383f 100644 --- a/drivers/usb/host/fsl-mph-dr-of.c +++ b/drivers/usb/host/fsl-mph-dr-of.c @@ -133,6 +133,8 @@ static int usb_get_ver_info(struct device_node *np) ver = FSL_USB_VER_1_6; else if (of_device_is_compatible(np, "fsl-usb2-dr-v2.2")) ver = FSL_USB_VER_2_2; + else if (of_device_is_compatible(np, "fsl-usb2-dr-v2.4")) + ver = FSL_USB_VER_2_4; else /* for previous controller versions */ ver = FSL_USB_VER_OLD; diff --git a/drivers/usb/host/ohci-nxp.c b/drivers/usb/host/ohci-nxp.c index a446386bf779..c60066a63606 100644 --- a/drivers/usb/host/ohci-nxp.c +++ b/drivers/usb/host/ohci-nxp.c @@ -355,7 +355,7 @@ static int __devinit usb_hcd_nxp_probe(struct platform_device *pdev) usb_otg_clk = clk_get(&pdev->dev, "ck_usb_otg"); if (IS_ERR(usb_otg_clk)) { dev_err(&pdev->dev, "failed to acquire USB DEV Clock\n"); - ret = PTR_ERR(usb_dev_clk); + ret = PTR_ERR(usb_otg_clk); goto out6; } diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c index 670c7059c9ae..e24ec9f79164 100644 --- a/drivers/usb/host/ohci-platform.c +++ b/drivers/usb/host/ohci-platform.c @@ -83,10 +83,14 @@ static int __devinit ohci_platform_probe(struct platform_device *dev) { struct usb_hcd *hcd; struct resource *res_mem; + struct usb_ohci_pdata *pdata = dev->dev.platform_data; int irq; int err = -ENOMEM; - BUG_ON(!dev->dev.platform_data); + if (!pdata) { + WARN_ON(1); + return -ENODEV; + } if (usb_disabled()) return -ENODEV; @@ -103,10 +107,18 @@ static int __devinit ohci_platform_probe(struct platform_device *dev) return -ENXIO; } + if (pdata->power_on) { + err = pdata->power_on(dev); + if (err < 0) + return err; + } + hcd = usb_create_hcd(&ohci_platform_hc_driver, &dev->dev, dev_name(&dev->dev)); - if (!hcd) - return -ENOMEM; + if (!hcd) { + err = -ENOMEM; + goto err_power; + } hcd->rsrc_start = res_mem->start; hcd->rsrc_len = resource_size(res_mem); @@ -118,8 +130,10 @@ static int __devinit ohci_platform_probe(struct platform_device *dev) } hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len); - if (!hcd->regs) + if (!hcd->regs) { + err = -ENOMEM; goto err_release_region; + } err = usb_add_hcd(hcd, irq, IRQF_SHARED); if (err) goto err_iounmap; @@ -134,12 +148,17 @@ err_release_region: release_mem_region(hcd->rsrc_start, hcd->rsrc_len); err_put_hcd: usb_put_hcd(hcd); +err_power: + if (pdata->power_off) + pdata->power_off(dev); + return err; } static int __devexit ohci_platform_remove(struct platform_device *dev) { struct usb_hcd *hcd = platform_get_drvdata(dev); + struct usb_ohci_pdata *pdata = dev->dev.platform_data; usb_remove_hcd(hcd); iounmap(hcd->regs); @@ -147,6 +166,9 @@ static int __devexit ohci_platform_remove(struct platform_device *dev) usb_put_hcd(hcd); platform_set_drvdata(dev, NULL); + if (pdata->power_off) + pdata->power_off(dev); + return 0; } @@ -154,12 +176,28 @@ static int __devexit ohci_platform_remove(struct platform_device *dev) static int ohci_platform_suspend(struct device *dev) { + struct usb_ohci_pdata *pdata = dev->platform_data; + struct platform_device *pdev = + container_of(dev, struct platform_device, dev); + + if (pdata->power_suspend) + pdata->power_suspend(pdev); + return 0; } static int ohci_platform_resume(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); + struct usb_ohci_pdata *pdata = dev->platform_data; + struct platform_device *pdev = + container_of(dev, struct platform_device, dev); + + if (pdata->power_on) { + int err = pdata->power_on(pdev); + if (err < 0) + return err; + } ohci_finish_controller_resume(hcd); return 0; diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c index e1a3cc6d28dc..77f4402aca03 100644 --- a/drivers/usb/host/ohci-pxa27x.c +++ b/drivers/usb/host/ohci-pxa27x.c @@ -23,6 +23,8 @@ #include <linux/signal.h> #include <linux/platform_device.h> #include <linux/clk.h> +#include <linux/of_platform.h> +#include <linux/of_gpio.h> #include <mach/hardware.h> #include <mach/ohci.h> #include <mach/pxa3xx-u2d.h> @@ -272,6 +274,67 @@ static void pxa27x_stop_hc(struct pxa27x_ohci *ohci, struct device *dev) clk_disable_unprepare(ohci->clk); } +#ifdef CONFIG_OF +static const struct of_device_id pxa_ohci_dt_ids[] = { + { .compatible = "marvell,pxa-ohci" }, + { } +}; + +MODULE_DEVICE_TABLE(of, pxa_ohci_dt_ids); + +static u64 pxa_ohci_dma_mask = DMA_BIT_MASK(32); + +static int __devinit ohci_pxa_of_init(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct pxaohci_platform_data *pdata; + u32 tmp; + + if (!np) + return 0; + + /* Right now device-tree probed devices don't get dma_mask set. + * Since shared usb code relies on it, set it here for now. + * Once we have dma capability bindings this can go away. + */ + if (!pdev->dev.dma_mask) + pdev->dev.dma_mask = &pxa_ohci_dma_mask; + + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return -ENOMEM; + + if (of_get_property(np, "marvell,enable-port1", NULL)) + pdata->flags |= ENABLE_PORT1; + if (of_get_property(np, "marvell,enable-port2", NULL)) + pdata->flags |= ENABLE_PORT2; + if (of_get_property(np, "marvell,enable-port3", NULL)) + pdata->flags |= ENABLE_PORT3; + if (of_get_property(np, "marvell,port-sense-low", NULL)) + pdata->flags |= POWER_SENSE_LOW; + if (of_get_property(np, "marvell,power-control-low", NULL)) + pdata->flags |= POWER_CONTROL_LOW; + if (of_get_property(np, "marvell,no-oc-protection", NULL)) + pdata->flags |= NO_OC_PROTECTION; + if (of_get_property(np, "marvell,oc-mode-perport", NULL)) + pdata->flags |= OC_MODE_PERPORT; + if (!of_property_read_u32(np, "marvell,power-on-delay", &tmp)) + pdata->power_on_delay = tmp; + if (!of_property_read_u32(np, "marvell,port-mode", &tmp)) + pdata->port_mode = tmp; + if (!of_property_read_u32(np, "marvell,power-budget", &tmp)) + pdata->power_budget = tmp; + + pdev->dev.platform_data = pdata; + + return 0; +} +#else +static int __devinit ohci_pxa_of_init(struct platform_device *pdev) +{ + return 0; +} +#endif /*-------------------------------------------------------------------------*/ @@ -297,6 +360,10 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device struct resource *r; struct clk *usb_clk; + retval = ohci_pxa_of_init(pdev); + if (retval) + return retval; + inf = pdev->dev.platform_data; if (!inf) @@ -544,6 +611,7 @@ static struct platform_driver ohci_hcd_pxa27x_driver = { .driver = { .name = "pxa27x-ohci", .owner = THIS_MODULE, + .of_match_table = of_match_ptr(pxa_ohci_dt_ids), #ifdef CONFIG_PM .pm = &ohci_hcd_pxa27x_pm_ops, #endif diff --git a/drivers/usb/host/ohci-xls.c b/drivers/usb/host/ohci-xls.c index 41e378f17c66..84201cd1a472 100644 --- a/drivers/usb/host/ohci-xls.c +++ b/drivers/usb/host/ohci-xls.c @@ -56,7 +56,7 @@ static int ohci_xls_probe_internal(const struct hc_driver *driver, goto err3; } - retval = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED); + retval = usb_add_hcd(hcd, irq, IRQF_SHARED); if (retval != 0) goto err4; return retval; diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c index 4c634eb56358..fcc09e5ec0ad 100644 --- a/drivers/usb/host/r8a66597-hcd.c +++ b/drivers/usb/host/r8a66597-hcd.c @@ -2029,15 +2029,14 @@ static int r8a66597_get_frame(struct usb_hcd *hcd) static void collect_usb_address_map(struct usb_device *udev, unsigned long *map) { int chix; + struct usb_device *childdev; if (udev->state == USB_STATE_CONFIGURED && udev->parent && udev->parent->devnum > 1 && udev->parent->descriptor.bDeviceClass == USB_CLASS_HUB) map[udev->devnum/32] |= (1 << (udev->devnum % 32)); - for (chix = 0; chix < udev->maxchild; chix++) { - struct usb_device *childdev = udev->children[chix]; - + usb_hub_for_each_child(udev, chix, childdev) { if (childdev) collect_usb_address_map(childdev, map); } diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c index 91ce1c02e617..619b05f42d4f 100644 --- a/drivers/usb/host/sl811-hcd.c +++ b/drivers/usb/host/sl811-hcd.c @@ -156,7 +156,7 @@ static void setup_packet( writeb(SL_SETUP /* | ep->epnum */, data_reg); writeb(usb_pipedevice(urb->pipe), data_reg); - /* always OUT/data0 */ ; + /* always OUT/data0 */ sl811_write(sl811, bank + SL11H_HOSTCTLREG, control | SL11H_HCTLMASK_OUT); ep->length = 0; diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index e4db350602b8..4b9e9aba2665 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -846,6 +846,11 @@ static const char hcd_name[] = "uhci_hcd"; #define PLATFORM_DRIVER uhci_grlib_driver #endif +#ifdef CONFIG_USB_UHCI_PLATFORM +#include "uhci-platform.c" +#define PLATFORM_DRIVER uhci_platform_driver +#endif + #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) #error "missing bus glue for uhci-hcd" #endif diff --git a/drivers/usb/host/uhci-platform.c b/drivers/usb/host/uhci-platform.c new file mode 100644 index 000000000000..e4780491df4a --- /dev/null +++ b/drivers/usb/host/uhci-platform.c @@ -0,0 +1,157 @@ +/* + * Generic UHCI HCD (Host Controller Driver) for Platform Devices + * + * Copyright (c) 2011 Tony Prisk <linux@prisktech.co.nz> + * + * This file is based on uhci-grlib.c + * (C) Copyright 2004-2007 Alan Stern, stern@rowland.harvard.edu + */ + +#include <linux/of.h> +#include <linux/platform_device.h> + +static int uhci_platform_init(struct usb_hcd *hcd) +{ + struct uhci_hcd *uhci = hcd_to_uhci(hcd); + + uhci->rh_numports = uhci_count_ports(hcd); + + /* Set up pointers to to generic functions */ + uhci->reset_hc = uhci_generic_reset_hc; + uhci->check_and_reset_hc = uhci_generic_check_and_reset_hc; + + /* No special actions need to be taken for the functions below */ + uhci->configure_hc = NULL; + uhci->resume_detect_interrupts_are_broken = NULL; + uhci->global_suspend_mode_is_broken = NULL; + + /* Reset if the controller isn't already safely quiescent. */ + check_and_reset_hc(uhci); + return 0; +} + +static const struct hc_driver uhci_platform_hc_driver = { + .description = hcd_name, + .product_desc = "Generic UHCI Host Controller", + .hcd_priv_size = sizeof(struct uhci_hcd), + + /* Generic hardware linkage */ + .irq = uhci_irq, + .flags = HCD_MEMORY | HCD_USB11, + + /* Basic lifecycle operations */ + .reset = uhci_platform_init, + .start = uhci_start, +#ifdef CONFIG_PM + .pci_suspend = NULL, + .pci_resume = NULL, + .bus_suspend = uhci_rh_suspend, + .bus_resume = uhci_rh_resume, +#endif + .stop = uhci_stop, + + .urb_enqueue = uhci_urb_enqueue, + .urb_dequeue = uhci_urb_dequeue, + + .endpoint_disable = uhci_hcd_endpoint_disable, + .get_frame_number = uhci_hcd_get_frame_number, + + .hub_status_data = uhci_hub_status_data, + .hub_control = uhci_hub_control, +}; + + +static int __devinit uhci_hcd_platform_probe(struct platform_device *pdev) +{ + struct usb_hcd *hcd; + struct uhci_hcd *uhci; + struct resource *res; + int ret; + + if (usb_disabled()) + return -ENODEV; + + hcd = usb_create_hcd(&uhci_platform_hc_driver, &pdev->dev, + pdev->name); + if (!hcd) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + hcd->rsrc_start = res->start; + hcd->rsrc_len = resource_size(res); + + if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { + pr_err("%s: request_mem_region failed\n", __func__); + ret = -EBUSY; + goto err_rmr; + } + + hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); + if (!hcd->regs) { + pr_err("%s: ioremap failed\n", __func__); + ret = -ENOMEM; + goto err_irq; + } + uhci = hcd_to_uhci(hcd); + + uhci->regs = hcd->regs; + + ret = usb_add_hcd(hcd, pdev->resource[1].start, IRQF_DISABLED | + IRQF_SHARED); + if (ret) + goto err_uhci; + + return 0; + +err_uhci: + iounmap(hcd->regs); +err_irq: + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); +err_rmr: + usb_put_hcd(hcd); + + return ret; +} + +static int uhci_hcd_platform_remove(struct platform_device *pdev) +{ + struct usb_hcd *hcd = platform_get_drvdata(pdev); + + usb_remove_hcd(hcd); + iounmap(hcd->regs); + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); + usb_put_hcd(hcd); + platform_set_drvdata(pdev, NULL); + + return 0; +} + +/* Make sure the controller is quiescent and that we're not using it + * any more. This is mainly for the benefit of programs which, like kexec, + * expect the hardware to be idle: not doing DMA or generating IRQs. + * + * This routine may be called in a damaged or failing kernel. Hence we + * do not acquire the spinlock before shutting down the controller. + */ +static void uhci_hcd_platform_shutdown(struct platform_device *op) +{ + struct usb_hcd *hcd = dev_get_drvdata(&op->dev); + + uhci_hc_died(hcd_to_uhci(hcd)); +} + +static const struct of_device_id platform_uhci_ids[] = { + { .compatible = "platform-uhci", }, + {} +}; + +static struct platform_driver uhci_platform_driver = { + .probe = uhci_hcd_platform_probe, + .remove = uhci_hcd_platform_remove, + .shutdown = uhci_hcd_platform_shutdown, + .driver = { + .name = "platform-uhci", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(platform_uhci_ids), + }, +}; diff --git a/drivers/usb/host/whci/hcd.c b/drivers/usb/host/whci/hcd.c index 1e141f755b26..c3a647816af0 100644 --- a/drivers/usb/host/whci/hcd.c +++ b/drivers/usb/host/whci/hcd.c @@ -238,16 +238,16 @@ static struct hc_driver whc_hc_driver = { static int whc_probe(struct umc_dev *umc) { - int ret = -ENOMEM; + int ret; struct usb_hcd *usb_hcd; - struct wusbhc *wusbhc = NULL; - struct whc *whc = NULL; + struct wusbhc *wusbhc; + struct whc *whc; struct device *dev = &umc->dev; usb_hcd = usb_create_hcd(&whc_hc_driver, dev, "whci"); if (usb_hcd == NULL) { dev_err(dev, "unable to create hcd\n"); - goto error; + return -ENOMEM; } usb_hcd->wireless = 1; diff --git a/drivers/usb/host/whci/qset.c b/drivers/usb/host/whci/qset.c index 76083ae92138..dc31c425ce01 100644 --- a/drivers/usb/host/whci/qset.c +++ b/drivers/usb/host/whci/qset.c @@ -436,7 +436,7 @@ static int qset_add_urb_sg(struct whc *whc, struct whc_qset *qset, struct urb *u int i; int ntds = 0; struct whc_std *std = NULL; - struct whc_page_list_entry *entry; + struct whc_page_list_entry *new_pl_virt; dma_addr_t prev_end = 0; size_t pl_len; int p = 0; @@ -508,12 +508,15 @@ static int qset_add_urb_sg(struct whc *whc, struct whc_qset *qset, struct urb *u pl_len = std->num_pointers * sizeof(struct whc_page_list_entry); - std->pl_virt = krealloc(std->pl_virt, pl_len, mem_flags); - if (std->pl_virt == NULL) { + new_pl_virt = krealloc(std->pl_virt, pl_len, mem_flags); + if (new_pl_virt == NULL) { + kfree(std->pl_virt); + std->pl_virt = NULL; return -ENOMEM; } + std->pl_virt = new_pl_virt; - for (;p < std->num_pointers; p++, entry++) { + for (;p < std->num_pointers; p++) { std->pl_virt[p].buf_ptr = cpu_to_le64(dma_addr); dma_addr = (dma_addr + WHCI_PAGE_SIZE) & ~(WHCI_PAGE_SIZE-1); } diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index d5eb357aa5c4..aa90ad4d4fd5 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -29,7 +29,7 @@ #define PORT_RWC_BITS (PORT_CSC | PORT_PEC | PORT_WRC | PORT_OCC | \ PORT_RC | PORT_PLC | PORT_PE) -/* usb 1.1 root hub device descriptor */ +/* USB 3.0 BOS descriptor and a capability descriptor, combined */ static u8 usb_bos_descriptor [] = { USB_DT_BOS_SIZE, /* __u8 bLength, 5 bytes */ USB_DT_BOS, /* __u8 bDescriptorType */ @@ -422,7 +422,7 @@ void xhci_set_link_state(struct xhci_hcd *xhci, __le32 __iomem **port_array, xhci_writel(xhci, temp, port_array[port_id]); } -void xhci_set_remote_wake_mask(struct xhci_hcd *xhci, +static void xhci_set_remote_wake_mask(struct xhci_hcd *xhci, __le32 __iomem **port_array, int port_id, u16 wake_mask) { u32 temp; @@ -808,6 +808,12 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, temp = xhci_readl(xhci, port_array[wIndex]); xhci_dbg(xhci, "set port power, actual port %d status = 0x%x\n", wIndex, temp); + + temp = usb_acpi_power_manageable(hcd->self.root_hub, + wIndex); + if (temp) + usb_acpi_set_power_state(hcd->self.root_hub, + wIndex, true); break; case USB_PORT_FEAT_RESET: temp = (temp | PORT_RESET); @@ -907,6 +913,16 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, xhci_disable_port(hcd, xhci, wIndex, port_array[wIndex], temp); break; + case USB_PORT_FEAT_POWER: + xhci_writel(xhci, temp & ~PORT_POWER, + port_array[wIndex]); + + temp = usb_acpi_power_manageable(hcd->self.root_hub, + wIndex); + if (temp) + usb_acpi_set_power_state(hcd->self.root_hub, + wIndex, false); + break; default: goto error; } diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 77689bd64cac..487bc083dead 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -1772,6 +1772,7 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) { struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller); struct dev_info *dev_info, *next; + struct xhci_cd *cur_cd, *next_cd; unsigned long flags; int size; int i, j, num_ports; @@ -1795,6 +1796,11 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) xhci_ring_free(xhci, xhci->cmd_ring); xhci->cmd_ring = NULL; xhci_dbg(xhci, "Freed command ring\n"); + list_for_each_entry_safe(cur_cd, next_cd, + &xhci->cancel_cmd_list, cancel_cmd_list) { + list_del(&cur_cd->cancel_cmd_list); + kfree(cur_cd); + } for (i = 1; i < MAX_HC_SLOTS; ++i) xhci_free_virt_device(xhci, i); @@ -2340,6 +2346,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) xhci->cmd_ring = xhci_ring_alloc(xhci, 1, 1, TYPE_COMMAND, flags); if (!xhci->cmd_ring) goto fail; + INIT_LIST_HEAD(&xhci->cancel_cmd_list); xhci_dbg(xhci, "Allocated command ring at %p\n", xhci->cmd_ring); xhci_dbg(xhci, "First segment DMA is 0x%llx\n", (unsigned long long)xhci->cmd_ring->first_seg->dma); diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 9bfd4ca1153c..8345d7c23061 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -103,6 +103,7 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) * PPT chipsets. */ xhci->quirks |= XHCI_SPURIOUS_REBOOT; + xhci->quirks |= XHCI_AVOID_BEI; } if (pdev->vendor == PCI_VENDOR_ID_ETRON && pdev->device == PCI_DEVICE_ID_ASROCK_P67) { diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 643c2f3f3e73..c6ebb176dc4f 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -280,12 +280,123 @@ static inline int room_on_ring(struct xhci_hcd *xhci, struct xhci_ring *ring, /* Ring the host controller doorbell after placing a command on the ring */ void xhci_ring_cmd_db(struct xhci_hcd *xhci) { + if (!(xhci->cmd_ring_state & CMD_RING_STATE_RUNNING)) + return; + xhci_dbg(xhci, "// Ding dong!\n"); xhci_writel(xhci, DB_VALUE_HOST, &xhci->dba->doorbell[0]); /* Flush PCI posted writes */ xhci_readl(xhci, &xhci->dba->doorbell[0]); } +static int xhci_abort_cmd_ring(struct xhci_hcd *xhci) +{ + u64 temp_64; + int ret; + + xhci_dbg(xhci, "Abort command ring\n"); + + if (!(xhci->cmd_ring_state & CMD_RING_STATE_RUNNING)) { + xhci_dbg(xhci, "The command ring isn't running, " + "Have the command ring been stopped?\n"); + return 0; + } + + temp_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring); + if (!(temp_64 & CMD_RING_RUNNING)) { + xhci_dbg(xhci, "Command ring had been stopped\n"); + return 0; + } + xhci->cmd_ring_state = CMD_RING_STATE_ABORTED; + xhci_write_64(xhci, temp_64 | CMD_RING_ABORT, + &xhci->op_regs->cmd_ring); + + /* Section 4.6.1.2 of xHCI 1.0 spec says software should + * time the completion od all xHCI commands, including + * the Command Abort operation. If software doesn't see + * CRR negated in a timely manner (e.g. longer than 5 + * seconds), then it should assume that the there are + * larger problems with the xHC and assert HCRST. + */ + ret = handshake(xhci, &xhci->op_regs->cmd_ring, + CMD_RING_RUNNING, 0, 5 * 1000 * 1000); + if (ret < 0) { + xhci_err(xhci, "Stopped the command ring failed, " + "maybe the host is dead\n"); + xhci->xhc_state |= XHCI_STATE_DYING; + xhci_quiesce(xhci); + xhci_halt(xhci); + return -ESHUTDOWN; + } + + return 0; +} + +static int xhci_queue_cd(struct xhci_hcd *xhci, + struct xhci_command *command, + union xhci_trb *cmd_trb) +{ + struct xhci_cd *cd; + cd = kzalloc(sizeof(struct xhci_cd), GFP_ATOMIC); + if (!cd) + return -ENOMEM; + INIT_LIST_HEAD(&cd->cancel_cmd_list); + + cd->command = command; + cd->cmd_trb = cmd_trb; + list_add_tail(&cd->cancel_cmd_list, &xhci->cancel_cmd_list); + + return 0; +} + +/* + * Cancel the command which has issue. + * + * Some commands may hang due to waiting for acknowledgement from + * usb device. It is outside of the xHC's ability to control and + * will cause the command ring is blocked. When it occurs software + * should intervene to recover the command ring. + * See Section 4.6.1.1 and 4.6.1.2 + */ +int xhci_cancel_cmd(struct xhci_hcd *xhci, struct xhci_command *command, + union xhci_trb *cmd_trb) +{ + int retval = 0; + unsigned long flags; + + spin_lock_irqsave(&xhci->lock, flags); + + if (xhci->xhc_state & XHCI_STATE_DYING) { + xhci_warn(xhci, "Abort the command ring," + " but the xHCI is dead.\n"); + retval = -ESHUTDOWN; + goto fail; + } + + /* queue the cmd desriptor to cancel_cmd_list */ + retval = xhci_queue_cd(xhci, command, cmd_trb); + if (retval) { + xhci_warn(xhci, "Queuing command descriptor failed.\n"); + goto fail; + } + + /* abort command ring */ + retval = xhci_abort_cmd_ring(xhci); + if (retval) { + xhci_err(xhci, "Abort command ring failed\n"); + if (unlikely(retval == -ESHUTDOWN)) { + spin_unlock_irqrestore(&xhci->lock, flags); + usb_hc_died(xhci_to_hcd(xhci)->primary_hcd); + xhci_dbg(xhci, "xHCI host controller is dead.\n"); + return retval; + } + } + +fail: + spin_unlock_irqrestore(&xhci->lock, flags); + return retval; +} + void xhci_ring_ep_doorbell(struct xhci_hcd *xhci, unsigned int slot_id, unsigned int ep_index, @@ -1059,6 +1170,20 @@ static void handle_reset_ep_completion(struct xhci_hcd *xhci, } } +/* Complete the command and detele it from the devcie's command queue. + */ +static void xhci_complete_cmd_in_cmd_wait_list(struct xhci_hcd *xhci, + struct xhci_command *command, u32 status) +{ + command->status = status; + list_del(&command->cmd_list); + if (command->completion) + complete(command->completion); + else + xhci_free_command(xhci, command); +} + + /* Check to see if a command in the device's command queue matches this one. * Signal the completion or free the command, and return 1. Return 0 if the * completed command isn't at the head of the command list. @@ -1077,15 +1202,144 @@ static int handle_cmd_in_cmd_wait_list(struct xhci_hcd *xhci, if (xhci->cmd_ring->dequeue != command->command_trb) return 0; - command->status = GET_COMP_CODE(le32_to_cpu(event->status)); - list_del(&command->cmd_list); - if (command->completion) - complete(command->completion); - else - xhci_free_command(xhci, command); + xhci_complete_cmd_in_cmd_wait_list(xhci, command, + GET_COMP_CODE(le32_to_cpu(event->status))); return 1; } +/* + * Finding the command trb need to be cancelled and modifying it to + * NO OP command. And if the command is in device's command wait + * list, finishing and freeing it. + * + * If we can't find the command trb, we think it had already been + * executed. + */ +static void xhci_cmd_to_noop(struct xhci_hcd *xhci, struct xhci_cd *cur_cd) +{ + struct xhci_segment *cur_seg; + union xhci_trb *cmd_trb; + u32 cycle_state; + + if (xhci->cmd_ring->dequeue == xhci->cmd_ring->enqueue) + return; + + /* find the current segment of command ring */ + cur_seg = find_trb_seg(xhci->cmd_ring->first_seg, + xhci->cmd_ring->dequeue, &cycle_state); + + /* find the command trb matched by cd from command ring */ + for (cmd_trb = xhci->cmd_ring->dequeue; + cmd_trb != xhci->cmd_ring->enqueue; + next_trb(xhci, xhci->cmd_ring, &cur_seg, &cmd_trb)) { + /* If the trb is link trb, continue */ + if (TRB_TYPE_LINK_LE32(cmd_trb->generic.field[3])) + continue; + + if (cur_cd->cmd_trb == cmd_trb) { + + /* If the command in device's command list, we should + * finish it and free the command structure. + */ + if (cur_cd->command) + xhci_complete_cmd_in_cmd_wait_list(xhci, + cur_cd->command, COMP_CMD_STOP); + + /* get cycle state from the origin command trb */ + cycle_state = le32_to_cpu(cmd_trb->generic.field[3]) + & TRB_CYCLE; + + /* modify the command trb to NO OP command */ + cmd_trb->generic.field[0] = 0; + cmd_trb->generic.field[1] = 0; + cmd_trb->generic.field[2] = 0; + cmd_trb->generic.field[3] = cpu_to_le32( + TRB_TYPE(TRB_CMD_NOOP) | cycle_state); + break; + } + } +} + +static void xhci_cancel_cmd_in_cd_list(struct xhci_hcd *xhci) +{ + struct xhci_cd *cur_cd, *next_cd; + + if (list_empty(&xhci->cancel_cmd_list)) + return; + + list_for_each_entry_safe(cur_cd, next_cd, + &xhci->cancel_cmd_list, cancel_cmd_list) { + xhci_cmd_to_noop(xhci, cur_cd); + list_del(&cur_cd->cancel_cmd_list); + kfree(cur_cd); + } +} + +/* + * traversing the cancel_cmd_list. If the command descriptor according + * to cmd_trb is found, the function free it and return 1, otherwise + * return 0. + */ +static int xhci_search_cmd_trb_in_cd_list(struct xhci_hcd *xhci, + union xhci_trb *cmd_trb) +{ + struct xhci_cd *cur_cd, *next_cd; + + if (list_empty(&xhci->cancel_cmd_list)) + return 0; + + list_for_each_entry_safe(cur_cd, next_cd, + &xhci->cancel_cmd_list, cancel_cmd_list) { + if (cur_cd->cmd_trb == cmd_trb) { + if (cur_cd->command) + xhci_complete_cmd_in_cmd_wait_list(xhci, + cur_cd->command, COMP_CMD_STOP); + list_del(&cur_cd->cancel_cmd_list); + kfree(cur_cd); + return 1; + } + } + + return 0; +} + +/* + * If the cmd_trb_comp_code is COMP_CMD_ABORT, we just check whether the + * trb pointed by the command ring dequeue pointer is the trb we want to + * cancel or not. And if the cmd_trb_comp_code is COMP_CMD_STOP, we will + * traverse the cancel_cmd_list to trun the all of the commands according + * to command descriptor to NO-OP trb. + */ +static int handle_stopped_cmd_ring(struct xhci_hcd *xhci, + int cmd_trb_comp_code) +{ + int cur_trb_is_good = 0; + + /* Searching the cmd trb pointed by the command ring dequeue + * pointer in command descriptor list. If it is found, free it. + */ + cur_trb_is_good = xhci_search_cmd_trb_in_cd_list(xhci, + xhci->cmd_ring->dequeue); + + if (cmd_trb_comp_code == COMP_CMD_ABORT) + xhci->cmd_ring_state = CMD_RING_STATE_STOPPED; + else if (cmd_trb_comp_code == COMP_CMD_STOP) { + /* traversing the cancel_cmd_list and canceling + * the command according to command descriptor + */ + xhci_cancel_cmd_in_cd_list(xhci); + + xhci->cmd_ring_state = CMD_RING_STATE_RUNNING; + /* + * ring command ring doorbell again to restart the + * command ring + */ + if (xhci->cmd_ring->dequeue != xhci->cmd_ring->enqueue) + xhci_ring_cmd_db(xhci); + } + return cur_trb_is_good; +} + static void handle_cmd_completion(struct xhci_hcd *xhci, struct xhci_event_cmd *event) { @@ -1111,6 +1365,22 @@ static void handle_cmd_completion(struct xhci_hcd *xhci, xhci->error_bitmask |= 1 << 5; return; } + + if ((GET_COMP_CODE(le32_to_cpu(event->status)) == COMP_CMD_ABORT) || + (GET_COMP_CODE(le32_to_cpu(event->status)) == COMP_CMD_STOP)) { + /* If the return value is 0, we think the trb pointed by + * command ring dequeue pointer is a good trb. The good + * trb means we don't want to cancel the trb, but it have + * been stopped by host. So we should handle it normally. + * Otherwise, driver should invoke inc_deq() and return. + */ + if (handle_stopped_cmd_ring(xhci, + GET_COMP_CODE(le32_to_cpu(event->status)))) { + inc_deq(xhci, xhci->cmd_ring); + return; + } + } + switch (le32_to_cpu(xhci->cmd_ring->dequeue->generic.field[3]) & TRB_TYPE_BITMASK) { case TRB_TYPE(TRB_ENABLE_SLOT): @@ -2003,6 +2273,8 @@ static int process_bulk_intr_td(struct xhci_hcd *xhci, struct xhci_td *td, */ static int handle_tx_event(struct xhci_hcd *xhci, struct xhci_transfer_event *event) + __releases(&xhci->lock) + __acquires(&xhci->lock) { struct xhci_virt_device *xdev; struct xhci_virt_ep *ep; @@ -2580,7 +2852,7 @@ static int prepare_ring(struct xhci_hcd *xhci, struct xhci_ring *ep_ring, xhci_err(xhci, "Ring expansion failed\n"); return -ENOMEM; } - }; + } if (enqueue_is_link_trb(ep_ring)) { struct xhci_ring *ring = ep_ring; @@ -3400,7 +3672,9 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags, } else { td->last_trb = ep_ring->enqueue; field |= TRB_IOC; - if (xhci->hci_version == 0x100) { + if (xhci->hci_version == 0x100 && + !(xhci->quirks & + XHCI_AVOID_BEI)) { /* Set BEI bit except for the last td */ if (i < num_tds - 1) field |= TRB_BEI; diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 6ece0ed288d4..8d7fcbbe6ade 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -52,7 +52,7 @@ MODULE_PARM_DESC(link_quirk, "Don't clear the chain bit on a link TRB"); * handshake done). There are two failure modes: "usec" have passed (major * hardware flakeout), or the register reads as all-ones (hardware removed). */ -static int handshake(struct xhci_hcd *xhci, void __iomem *ptr, +int handshake(struct xhci_hcd *xhci, void __iomem *ptr, u32 mask, u32 done, int usec) { u32 result; @@ -105,9 +105,10 @@ int xhci_halt(struct xhci_hcd *xhci) ret = handshake(xhci, &xhci->op_regs->status, STS_HALT, STS_HALT, XHCI_MAX_HALT_USEC); - if (!ret) + if (!ret) { xhci->xhc_state |= XHCI_STATE_HALTED; - else + xhci->cmd_ring_state = CMD_RING_STATE_STOPPED; + } else xhci_warn(xhci, "Host not halted after %u microseconds.\n", XHCI_MAX_HALT_USEC); return ret; @@ -470,6 +471,8 @@ static bool compliance_mode_recovery_timer_quirk_check(void) dmi_product_name = dmi_get_system_info(DMI_PRODUCT_NAME); dmi_sys_vendor = dmi_get_system_info(DMI_SYS_VENDOR); + if (!dmi_product_name || !dmi_sys_vendor) + return false; if (!(strstr(dmi_sys_vendor, "Hewlett-Packard"))) return false; @@ -581,6 +584,7 @@ static int xhci_run_finished(struct xhci_hcd *xhci) return -ENODEV; } xhci->shared_hcd->state = HC_STATE_RUNNING; + xhci->cmd_ring_state = CMD_RING_STATE_RUNNING; if (xhci->quirks & XHCI_NEC_HOST) xhci_ring_cmd_db(xhci); @@ -886,7 +890,7 @@ int xhci_suspend(struct xhci_hcd *xhci) command &= ~CMD_RUN; xhci_writel(xhci, command, &xhci->op_regs->command); if (handshake(xhci, &xhci->op_regs->status, - STS_HALT, STS_HALT, 100*100)) { + STS_HALT, STS_HALT, XHCI_MAX_HALT_USEC)) { xhci_warn(xhci, "WARN: xHC CMD_RUN timeout\n"); spin_unlock_irq(&xhci->lock); return -ETIMEDOUT; @@ -1948,7 +1952,7 @@ static void xhci_finish_resource_reservation(struct xhci_hcd *xhci, xhci->num_active_eps); } -unsigned int xhci_get_block_size(struct usb_device *udev) +static unsigned int xhci_get_block_size(struct usb_device *udev) { switch (udev->speed) { case USB_SPEED_LOW: @@ -1966,7 +1970,8 @@ unsigned int xhci_get_block_size(struct usb_device *udev) } } -unsigned int xhci_get_largest_overhead(struct xhci_interval_bw *interval_bw) +static unsigned int +xhci_get_largest_overhead(struct xhci_interval_bw *interval_bw) { if (interval_bw->overhead[LS_OVERHEAD_TYPE]) return LS_OVERHEAD; @@ -2521,6 +2526,7 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci, struct completion *cmd_completion; u32 *cmd_status; struct xhci_virt_device *virt_dev; + union xhci_trb *cmd_trb; spin_lock_irqsave(&xhci->lock, flags); virt_dev = xhci->devs[udev->slot_id]; @@ -2566,6 +2572,7 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci, } init_completion(cmd_completion); + cmd_trb = xhci->cmd_ring->dequeue; if (!ctx_change) ret = xhci_queue_configure_endpoint(xhci, in_ctx->dma, udev->slot_id, must_succeed); @@ -2587,14 +2594,17 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci, /* Wait for the configure endpoint command to complete */ timeleft = wait_for_completion_interruptible_timeout( cmd_completion, - USB_CTRL_SET_TIMEOUT); + XHCI_CMD_DEFAULT_TIMEOUT); if (timeleft <= 0) { xhci_warn(xhci, "%s while waiting for %s command\n", timeleft == 0 ? "Timeout" : "Signal", ctx_change == 0 ? "configure endpoint" : "evaluate context"); - /* FIXME cancel the configure endpoint command */ + /* cancel the configure endpoint command */ + ret = xhci_cancel_cmd(xhci, command, cmd_trb); + if (ret < 0) + return ret; return -ETIME; } @@ -3543,8 +3553,10 @@ int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev) unsigned long flags; int timeleft; int ret; + union xhci_trb *cmd_trb; spin_lock_irqsave(&xhci->lock, flags); + cmd_trb = xhci->cmd_ring->dequeue; ret = xhci_queue_slot_control(xhci, TRB_ENABLE_SLOT, 0); if (ret) { spin_unlock_irqrestore(&xhci->lock, flags); @@ -3556,12 +3568,12 @@ int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev) /* XXX: how much time for xHC slot assignment? */ timeleft = wait_for_completion_interruptible_timeout(&xhci->addr_dev, - USB_CTRL_SET_TIMEOUT); + XHCI_CMD_DEFAULT_TIMEOUT); if (timeleft <= 0) { xhci_warn(xhci, "%s while waiting for a slot\n", timeleft == 0 ? "Timeout" : "Signal"); - /* FIXME cancel the enable slot request */ - return 0; + /* cancel the enable slot request */ + return xhci_cancel_cmd(xhci, NULL, cmd_trb); } if (!xhci->slot_id) { @@ -3622,6 +3634,7 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev) struct xhci_slot_ctx *slot_ctx; struct xhci_input_control_ctx *ctrl_ctx; u64 temp_64; + union xhci_trb *cmd_trb; if (!udev->slot_id) { xhci_dbg(xhci, "Bad Slot ID %d\n", udev->slot_id); @@ -3660,6 +3673,7 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev) xhci_dbg_ctx(xhci, virt_dev->in_ctx, 2); spin_lock_irqsave(&xhci->lock, flags); + cmd_trb = xhci->cmd_ring->dequeue; ret = xhci_queue_address_device(xhci, virt_dev->in_ctx->dma, udev->slot_id); if (ret) { @@ -3672,7 +3686,7 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev) /* ctrl tx can take up to 5 sec; XXX: need more time for xHC? */ timeleft = wait_for_completion_interruptible_timeout(&xhci->addr_dev, - USB_CTRL_SET_TIMEOUT); + XHCI_CMD_DEFAULT_TIMEOUT); /* FIXME: From section 4.3.4: "Software shall be responsible for timing * the SetAddress() "recovery interval" required by USB and aborting the * command on a timeout. @@ -3680,7 +3694,10 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev) if (timeleft <= 0) { xhci_warn(xhci, "%s while waiting for address device command\n", timeleft == 0 ? "Timeout" : "Signal"); - /* FIXME cancel the address device command */ + /* cancel the address device command */ + ret = xhci_cancel_cmd(xhci, NULL, cmd_trb); + if (ret < 0) + return ret; return -ETIME; } diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 1a05908c6673..53df4e70ca07 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1256,6 +1256,16 @@ struct xhci_td { union xhci_trb *last_trb; }; +/* xHCI command default timeout value */ +#define XHCI_CMD_DEFAULT_TIMEOUT (5 * HZ) + +/* command descriptor */ +struct xhci_cd { + struct list_head cancel_cmd_list; + struct xhci_command *command; + union xhci_trb *cmd_trb; +}; + struct xhci_dequeue_state { struct xhci_segment *new_deq_seg; union xhci_trb *new_deq_ptr; @@ -1421,6 +1431,11 @@ struct xhci_hcd { /* data structures */ struct xhci_device_context_array *dcbaa; struct xhci_ring *cmd_ring; + unsigned int cmd_ring_state; +#define CMD_RING_STATE_RUNNING (1 << 0) +#define CMD_RING_STATE_ABORTED (1 << 1) +#define CMD_RING_STATE_STOPPED (1 << 2) + struct list_head cancel_cmd_list; unsigned int cmd_ring_reserved_trbs; struct xhci_ring *event_ring; struct xhci_erst erst; @@ -1496,6 +1511,7 @@ struct xhci_hcd { #define XHCI_INTEL_HOST (1 << 12) #define XHCI_SPURIOUS_REBOOT (1 << 13) #define XHCI_COMP_MODE_QUIRK (1 << 14) +#define XHCI_AVOID_BEI (1 << 15) unsigned int num_active_eps; unsigned int limit_active_eps; /* There are two roothubs to keep track of bus suspend info for */ @@ -1704,6 +1720,8 @@ static inline void xhci_unregister_plat(void) /* xHCI host controller glue */ typedef void (*xhci_get_quirks_t)(struct device *, struct xhci_hcd *); +int handshake(struct xhci_hcd *xhci, void __iomem *ptr, + u32 mask, u32 done, int usec); void xhci_quiesce(struct xhci_hcd *xhci); int xhci_halt(struct xhci_hcd *xhci); int xhci_reset(struct xhci_hcd *xhci); @@ -1794,6 +1812,8 @@ void xhci_queue_config_ep_quirk(struct xhci_hcd *xhci, unsigned int slot_id, unsigned int ep_index, struct xhci_dequeue_state *deq_state); void xhci_stop_endpoint_command_watchdog(unsigned long arg); +int xhci_cancel_cmd(struct xhci_hcd *xhci, struct xhci_command *command, + union xhci_trb *cmd_trb); void xhci_ring_ep_doorbell(struct xhci_hcd *xhci, unsigned int slot_id, unsigned int ep_index, unsigned int stream_id); diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig index 1bfcd02ebeb5..a8f05239350e 100644 --- a/drivers/usb/misc/Kconfig +++ b/drivers/usb/misc/Kconfig @@ -244,3 +244,8 @@ config USB_YUREX To compile this driver as a module, choose M here: the module will be called yurex. +config USB_EZUSB_FX2 + tristate "Functions for loading firmware on EZUSB chips" + help + Say Y here if you need EZUSB device support. + (Cypress FX/FX2/FX2LP microcontrollers) diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile index 796ce7ebccc8..3e99a643294b 100644 --- a/drivers/usb/misc/Makefile +++ b/drivers/usb/misc/Makefile @@ -11,6 +11,7 @@ obj-$(CONFIG_USB_CYPRESS_CY7C63) += cypress_cy7c63.o obj-$(CONFIG_USB_CYTHERM) += cytherm.o obj-$(CONFIG_USB_EMI26) += emi26.o obj-$(CONFIG_USB_EMI62) += emi62.o +obj-$(CONFIG_USB_EZUSB_FX2) += ezusb.o obj-$(CONFIG_USB_FTDI_ELAN) += ftdi-elan.o obj-$(CONFIG_USB_IDMOUSE) += idmouse.o obj-$(CONFIG_USB_IOWARRIOR) += iowarrior.o diff --git a/drivers/usb/misc/ezusb.c b/drivers/usb/misc/ezusb.c new file mode 100644 index 000000000000..4223d761223d --- /dev/null +++ b/drivers/usb/misc/ezusb.c @@ -0,0 +1,160 @@ +/* + * EZ-USB specific functions used by some of the USB to Serial drivers. + * + * Copyright (C) 1999 - 2002 Greg Kroah-Hartman (greg@kroah.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/usb.h> +#include <linux/firmware.h> +#include <linux/ihex.h> + +struct ezusb_fx_type { + /* EZ-USB Control and Status Register. Bit 0 controls 8051 reset */ + unsigned short cpucs_reg; + unsigned short max_internal_adress; +}; + +struct ezusb_fx_type ezusb_fx1 = { + .cpucs_reg = 0x7F92, + .max_internal_adress = 0x1B3F, +}; + +struct ezusb_fx_type ezusb_fx2 = { + .cpucs_reg = 0xE600, + .max_internal_adress = 0x3FFF, +}; + +/* Commands for writing to memory */ +#define WRITE_INT_RAM 0xA0 +#define WRITE_EXT_RAM 0xA3 + +int ezusb_writememory(struct usb_device *dev, int address, + unsigned char *data, int length, __u8 request) +{ + int result; + unsigned char *transfer_buffer; + + if (!dev) + return -ENODEV; + + transfer_buffer = kmemdup(data, length, GFP_KERNEL); + if (!transfer_buffer) { + dev_err(&dev->dev, "%s - kmalloc(%d) failed.\n", + __func__, length); + return -ENOMEM; + } + result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), request, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + address, 0, transfer_buffer, length, 3000); + + kfree(transfer_buffer); + return result; +} +EXPORT_SYMBOL_GPL(ezusb_writememory); + +int ezusb_set_reset(struct usb_device *dev, unsigned short cpucs_reg, + unsigned char reset_bit) +{ + int response = ezusb_writememory(dev, cpucs_reg, &reset_bit, 1, WRITE_INT_RAM); + if (response < 0) + dev_err(&dev->dev, "%s-%d failed: %d\n", + __func__, reset_bit, response); + return response; +} + +int ezusb_fx1_set_reset(struct usb_device *dev, unsigned char reset_bit) +{ + return ezusb_set_reset(dev, ezusb_fx1.cpucs_reg, reset_bit); +} +EXPORT_SYMBOL_GPL(ezusb_fx1_set_reset); + +int ezusb_fx2_set_reset(struct usb_device *dev, unsigned char reset_bit) +{ + return ezusb_set_reset(dev, ezusb_fx2.cpucs_reg, reset_bit); +} +EXPORT_SYMBOL_GPL(ezusb_fx2_set_reset); + +static int ezusb_ihex_firmware_download(struct usb_device *dev, + struct ezusb_fx_type fx, + const char *firmware_path) +{ + int ret = -ENOENT; + const struct firmware *firmware = NULL; + const struct ihex_binrec *record; + + if (request_ihex_firmware(&firmware, firmware_path, + &dev->dev)) { + dev_err(&dev->dev, + "%s - request \"%s\" failed\n", + __func__, firmware_path); + goto out; + } + + ret = ezusb_set_reset(dev, fx.cpucs_reg, 0); + if (ret < 0) + goto out; + + record = (const struct ihex_binrec *)firmware->data; + for (; record; record = ihex_next_binrec(record)) { + if (be32_to_cpu(record->addr) > fx.max_internal_adress) { + ret = ezusb_writememory(dev, be32_to_cpu(record->addr), + (unsigned char *)record->data, + be16_to_cpu(record->len), WRITE_EXT_RAM); + if (ret < 0) { + dev_err(&dev->dev, "%s - ezusb_writememory " + "failed writing internal memory " + "(%d %04X %p %d)\n", __func__, ret, + be32_to_cpu(record->addr), record->data, + be16_to_cpu(record->len)); + goto out; + } + } + } + + ret = ezusb_set_reset(dev, fx.cpucs_reg, 1); + if (ret < 0) + goto out; + record = (const struct ihex_binrec *)firmware->data; + for (; record; record = ihex_next_binrec(record)) { + if (be32_to_cpu(record->addr) <= fx.max_internal_adress) { + ret = ezusb_writememory(dev, be32_to_cpu(record->addr), + (unsigned char *)record->data, + be16_to_cpu(record->len), WRITE_INT_RAM); + if (ret < 0) { + dev_err(&dev->dev, "%s - ezusb_writememory " + "failed writing external memory " + "(%d %04X %p %d)\n", __func__, ret, + be32_to_cpu(record->addr), record->data, + be16_to_cpu(record->len)); + goto out; + } + } + } + ret = ezusb_set_reset(dev, fx.cpucs_reg, 0); +out: + release_firmware(firmware); + return ret; +} + +int ezusb_fx1_ihex_firmware_download(struct usb_device *dev, + const char *firmware_path) +{ + return ezusb_ihex_firmware_download(dev, ezusb_fx1, firmware_path); +} +EXPORT_SYMBOL_GPL(ezusb_fx1_ihex_firmware_download); + +int ezusb_fx2_ihex_firmware_download(struct usb_device *dev, + const char *firmware_path) +{ + return ezusb_ihex_firmware_download(dev, ezusb_fx2, firmware_path); +} +EXPORT_SYMBOL_GPL(ezusb_fx2_ihex_firmware_download); + diff --git a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c index a2702cbfe804..80894791c020 100644 --- a/drivers/usb/misc/legousbtower.c +++ b/drivers/usb/misc/legousbtower.c @@ -868,9 +868,6 @@ static int tower_probe (struct usb_interface *interface, const struct usb_device dbg(2, "%s: enter", __func__); - if (udev == NULL) - dev_info(&interface->dev, "udev is NULL.\n"); - /* allocate memory for our device state and initialize it */ dev = kmalloc (sizeof(struct lego_usb_tower), GFP_KERNEL); diff --git a/drivers/usb/misc/rio500.c b/drivers/usb/misc/rio500.c index 1084124c4a44..b9b356a9dd11 100644 --- a/drivers/usb/misc/rio500.c +++ b/drivers/usb/misc/rio500.c @@ -338,7 +338,7 @@ write_rio(struct file *file, const char __user *buffer, thistime -= partial; } else break; - }; + } if (result) { dev_err(&rio->rio_dev->dev, "Write Whoops - %x\n", result); diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig index 6259f0d99324..23a0b7f0892d 100644 --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -12,7 +12,6 @@ config USB_MUSB_HDRC select TWL4030_USB if MACH_OMAP_3430SDP select TWL6030_USB if MACH_OMAP_4430SDP || MACH_OMAP4_PANDA select USB_OTG_UTILS - select USB_GADGET_DUALSPEED help Say Y here if your system has a dual role high speed USB controller based on the Mentor Graphics silicon IP. Then @@ -20,7 +19,7 @@ config USB_MUSB_HDRC it's being used with, including the USB peripheral role, or the USB host role, or both. - Texas Instruments familiies using this IP include DaVinci + Texas Instruments families using this IP include DaVinci (35x, 644x ...), OMAP 243x, OMAP 3, and TUSB 6010. Analog Devices parts using this IP include Blackfin BF54x, diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c index 7a95ab87ac00..457f25e62c51 100644 --- a/drivers/usb/musb/am35x.c +++ b/drivers/usb/musb/am35x.c @@ -33,6 +33,7 @@ #include <linux/io.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> +#include <linux/usb/nop-usb-xceiv.h> #include <plat/usb.h> @@ -107,9 +108,8 @@ static void am35x_musb_enable(struct musb *musb) musb_writel(reg_base, CORE_INTR_MASK_SET_REG, AM35X_INTR_USB_MASK); /* Force the DRVVBUS IRQ so we can start polling for ID change. */ - if (is_otg_enabled(musb)) - musb_writel(reg_base, CORE_INTR_SRC_SET_REG, - AM35X_INTR_DRVVBUS << AM35X_INTR_USB_SHIFT); + musb_writel(reg_base, CORE_INTR_SRC_SET_REG, + AM35X_INTR_DRVVBUS << AM35X_INTR_USB_SHIFT); } /* @@ -173,9 +173,6 @@ static void otg_timer(unsigned long _musb) MUSB_INTR_VBUSERROR << AM35X_INTR_USB_SHIFT); break; case OTG_STATE_B_IDLE: - if (!is_peripheral_enabled(musb)) - break; - devctl = musb_readb(mregs, MUSB_DEVCTL); if (devctl & MUSB_DEVCTL_BDEVICE) mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ); @@ -192,9 +189,6 @@ static void am35x_musb_try_idle(struct musb *musb, unsigned long timeout) { static unsigned long last_timer; - if (!is_otg_enabled(musb)) - return; - if (timeout == 0) timeout = jiffies + msecs_to_jiffies(3); @@ -271,8 +265,7 @@ static irqreturn_t am35x_musb_interrupt(int irq, void *hci) u8 devctl = musb_readb(mregs, MUSB_DEVCTL); int err; - err = is_host_enabled(musb) && (musb->int_usb & - MUSB_INTR_VBUSERROR); + err = musb->int_usb & MUSB_INTR_VBUSERROR; if (err) { /* * The Mentor core doesn't debounce VBUS as needed @@ -289,7 +282,7 @@ static irqreturn_t am35x_musb_interrupt(int irq, void *hci) musb->xceiv->state = OTG_STATE_A_WAIT_VFALL; mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ); WARNING("VBUS error workaround (delay coming)\n"); - } else if (is_host_enabled(musb) && drvvbus) { + } else if (drvvbus) { MUSB_HST_MODE(musb); otg->default_a = 1; musb->xceiv->state = OTG_STATE_A_WAIT_VRISE; @@ -326,7 +319,7 @@ eoi: } /* Poll for ID change */ - if (is_otg_enabled(musb) && musb->xceiv->state == OTG_STATE_B_IDLE) + if (musb->xceiv->state == OTG_STATE_B_IDLE) mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ); spin_unlock_irqrestore(&musb->lock, flags); @@ -369,8 +362,7 @@ static int am35x_musb_init(struct musb *musb) if (IS_ERR_OR_NULL(musb->xceiv)) return -ENODEV; - if (is_host_enabled(musb)) - setup_timer(&otg_workaround, otg_timer, (unsigned long) musb); + setup_timer(&otg_workaround, otg_timer, (unsigned long) musb); /* Reset the musb */ if (data->reset) @@ -400,8 +392,7 @@ static int am35x_musb_exit(struct musb *musb) struct musb_hdrc_platform_data *plat = dev->platform_data; struct omap_musb_board_data *data = plat->board_data; - if (is_host_enabled(musb)) - del_timer_sync(&otg_workaround); + del_timer_sync(&otg_workaround); /* Shutdown the on-chip PHY and its PLL. */ if (data->set_phy_power) @@ -468,6 +459,7 @@ static int __devinit am35x_probe(struct platform_device *pdev) struct clk *clk; int ret = -ENOMEM; + int musbid; glue = kzalloc(sizeof(*glue), GFP_KERNEL); if (!glue) { @@ -475,38 +467,47 @@ static int __devinit am35x_probe(struct platform_device *pdev) goto err0; } - musb = platform_device_alloc("musb-hdrc", -1); + /* get the musb id */ + musbid = musb_get_id(&pdev->dev, GFP_KERNEL); + if (musbid < 0) { + dev_err(&pdev->dev, "failed to allocate musb id\n"); + ret = -ENOMEM; + goto err1; + } + + musb = platform_device_alloc("musb-hdrc", musbid); if (!musb) { dev_err(&pdev->dev, "failed to allocate musb device\n"); - goto err1; + goto err2; } phy_clk = clk_get(&pdev->dev, "fck"); if (IS_ERR(phy_clk)) { dev_err(&pdev->dev, "failed to get PHY clock\n"); ret = PTR_ERR(phy_clk); - goto err2; + goto err3; } clk = clk_get(&pdev->dev, "ick"); if (IS_ERR(clk)) { dev_err(&pdev->dev, "failed to get clock\n"); ret = PTR_ERR(clk); - goto err3; + goto err4; } ret = clk_enable(phy_clk); if (ret) { dev_err(&pdev->dev, "failed to enable PHY clock\n"); - goto err4; + goto err5; } ret = clk_enable(clk); if (ret) { dev_err(&pdev->dev, "failed to enable clock\n"); - goto err5; + goto err6; } + musb->id = musbid; musb->dev.parent = &pdev->dev; musb->dev.dma_mask = &am35x_dmamask; musb->dev.coherent_dma_mask = am35x_dmamask; @@ -524,38 +525,41 @@ static int __devinit am35x_probe(struct platform_device *pdev) pdev->num_resources); if (ret) { dev_err(&pdev->dev, "failed to add resources\n"); - goto err6; + goto err7; } ret = platform_device_add_data(musb, pdata, sizeof(*pdata)); if (ret) { dev_err(&pdev->dev, "failed to add platform_data\n"); - goto err6; + goto err7; } ret = platform_device_add(musb); if (ret) { dev_err(&pdev->dev, "failed to register musb device\n"); - goto err6; + goto err7; } return 0; -err6: +err7: clk_disable(clk); -err5: +err6: clk_disable(phy_clk); -err4: +err5: clk_put(clk); -err3: +err4: clk_put(phy_clk); -err2: +err3: platform_device_put(musb); +err2: + musb_put_id(&pdev->dev, musbid); + err1: kfree(glue); @@ -567,6 +571,7 @@ static int __devexit am35x_remove(struct platform_device *pdev) { struct am35x_glue *glue = platform_get_drvdata(pdev); + musb_put_id(&pdev->dev, glue->musb->id); platform_device_del(glue->musb); platform_device_put(glue->musb); clk_disable(glue->clk); diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c index 428e6aa3e78a..e8cff9bb9d23 100644 --- a/drivers/usb/musb/blackfin.c +++ b/drivers/usb/musb/blackfin.c @@ -19,6 +19,7 @@ #include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <linux/prefetch.h> +#include <linux/usb/nop-usb-xceiv.h> #include <asm/cacheflush.h> @@ -184,8 +185,8 @@ static irqreturn_t blackfin_interrupt(int irq, void *__hci) } /* Start sampling ID pin, when plug is removed from MUSB */ - if ((is_otg_enabled(musb) && (musb->xceiv->state == OTG_STATE_B_IDLE - || musb->xceiv->state == OTG_STATE_A_WAIT_BCON)) || + if ((musb->xceiv->state == OTG_STATE_B_IDLE + || musb->xceiv->state == OTG_STATE_A_WAIT_BCON) || (musb->int_usb & MUSB_INTR_DISCONNECT && is_host_active(musb))) { mod_timer(&musb_conn_timer, jiffies + TIMER_DELAY); musb->a_wait_bcon = TIMER_DELAY; @@ -228,18 +229,13 @@ static void musb_conn_timer_handler(unsigned long _musb) val = MUSB_INTR_SUSPEND | MUSB_INTR_VBUSERROR; musb_writeb(musb->mregs, MUSB_INTRUSB, val); - if (is_otg_enabled(musb)) - musb->xceiv->state = OTG_STATE_B_IDLE; - else - musb_writeb(musb->mregs, MUSB_POWER, MUSB_POWER_HSENAB); + musb->xceiv->state = OTG_STATE_B_IDLE; } mod_timer(&musb_conn_timer, jiffies + TIMER_DELAY); break; case OTG_STATE_B_IDLE: - - if (!is_peripheral_enabled(musb)) - break; - /* Start a new session. It seems that MUSB needs taking + /* + * Start a new session. It seems that MUSB needs taking * some time to recognize the type of the plug inserted? */ val = musb_readw(musb->mregs, MUSB_DEVCTL); @@ -295,10 +291,7 @@ static void musb_conn_timer_handler(unsigned long _musb) static void bfin_musb_enable(struct musb *musb) { - if (!is_otg_enabled(musb) && is_host_enabled(musb)) { - mod_timer(&musb_conn_timer, jiffies + TIMER_DELAY); - musb->a_wait_bcon = TIMER_DELAY; - } + /* REVISIT is this really correct ? */ } static void bfin_musb_disable(struct musb *musb) @@ -323,12 +316,6 @@ static int bfin_musb_set_power(struct usb_phy *x, unsigned mA) return 0; } -static void bfin_musb_try_idle(struct musb *musb, unsigned long timeout) -{ - if (!is_otg_enabled(musb) && is_host_enabled(musb)) - mod_timer(&musb_conn_timer, jiffies + TIMER_DELAY); -} - static int bfin_musb_vbus_status(struct musb *musb) { return 0; @@ -424,12 +411,10 @@ static int bfin_musb_init(struct musb *musb) bfin_musb_reg_init(musb); - if (is_host_enabled(musb)) { - setup_timer(&musb_conn_timer, - musb_conn_timer_handler, (unsigned long) musb); - } - if (is_peripheral_enabled(musb)) - musb->xceiv->set_power = bfin_musb_set_power; + setup_timer(&musb_conn_timer, musb_conn_timer_handler, + (unsigned long) musb); + + musb->xceiv->set_power = bfin_musb_set_power; musb->isr = blackfin_interrupt; musb->double_buffer_not_ok = true; @@ -454,7 +439,6 @@ static const struct musb_platform_ops bfin_ops = { .disable = bfin_musb_disable, .set_mode = bfin_musb_set_mode, - .try_idle = bfin_musb_try_idle, .vbus_status = bfin_musb_vbus_status, .set_vbus = bfin_musb_set_vbus, @@ -471,6 +455,7 @@ static int __devinit bfin_probe(struct platform_device *pdev) struct bfin_glue *glue; int ret = -ENOMEM; + int musbid; glue = kzalloc(sizeof(*glue), GFP_KERNEL); if (!glue) { @@ -478,12 +463,21 @@ static int __devinit bfin_probe(struct platform_device *pdev) goto err0; } - musb = platform_device_alloc("musb-hdrc", -1); + /* get the musb id */ + musbid = musb_get_id(&pdev->dev, GFP_KERNEL); + if (musbid < 0) { + dev_err(&pdev->dev, "failed to allocate musb id\n"); + ret = -ENOMEM; + goto err1; + } + + musb = platform_device_alloc("musb-hdrc", musbid); if (!musb) { dev_err(&pdev->dev, "failed to allocate musb device\n"); - goto err1; + goto err2; } + musb->id = musbid; musb->dev.parent = &pdev->dev; musb->dev.dma_mask = &bfin_dmamask; musb->dev.coherent_dma_mask = bfin_dmamask; @@ -499,26 +493,29 @@ static int __devinit bfin_probe(struct platform_device *pdev) pdev->num_resources); if (ret) { dev_err(&pdev->dev, "failed to add resources\n"); - goto err2; + goto err3; } ret = platform_device_add_data(musb, pdata, sizeof(*pdata)); if (ret) { dev_err(&pdev->dev, "failed to add platform_data\n"); - goto err2; + goto err3; } ret = platform_device_add(musb); if (ret) { dev_err(&pdev->dev, "failed to register musb device\n"); - goto err2; + goto err3; } return 0; -err2: +err3: platform_device_put(musb); +err2: + musb_put_id(&pdev->dev, musbid); + err1: kfree(glue); @@ -530,6 +527,7 @@ static int __devexit bfin_remove(struct platform_device *pdev) { struct bfin_glue *glue = platform_get_drvdata(pdev); + musb_put_id(&pdev->dev, glue->musb->id); platform_device_del(glue->musb); platform_device_put(glue->musb); kfree(glue); diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c index 8637c1f69fc3..e19da82b4782 100644 --- a/drivers/usb/musb/cppi_dma.c +++ b/drivers/usb/musb/cppi_dma.c @@ -1316,7 +1316,7 @@ irqreturn_t cppi_interrupt(int irq, void *dev_id) } /* Instantiate a software object representing a DMA controller. */ -struct dma_controller *__init +struct dma_controller *__devinit dma_controller_create(struct musb *musb, void __iomem *mregs) { struct cppi *controller; diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c index 0f9fcec4e1d3..ce11d20b90f4 100644 --- a/drivers/usb/musb/da8xx.c +++ b/drivers/usb/musb/da8xx.c @@ -33,6 +33,7 @@ #include <linux/io.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> +#include <linux/usb/nop-usb-xceiv.h> #include <mach/da8xx.h> #include <mach/usb.h> @@ -155,9 +156,8 @@ static void da8xx_musb_enable(struct musb *musb) musb_writel(reg_base, DA8XX_USB_INTR_MASK_SET_REG, mask); /* Force the DRVVBUS IRQ so we can start polling for ID change. */ - if (is_otg_enabled(musb)) - musb_writel(reg_base, DA8XX_USB_INTR_SRC_SET_REG, - DA8XX_INTR_DRVVBUS << DA8XX_INTR_USB_SHIFT); + musb_writel(reg_base, DA8XX_USB_INTR_SRC_SET_REG, + DA8XX_INTR_DRVVBUS << DA8XX_INTR_USB_SHIFT); } /** @@ -231,9 +231,6 @@ static void otg_timer(unsigned long _musb) MUSB_INTR_VBUSERROR << DA8XX_INTR_USB_SHIFT); break; case OTG_STATE_B_IDLE: - if (!is_peripheral_enabled(musb)) - break; - /* * There's no ID-changed IRQ, so we have no good way to tell * when to switch to the A-Default state machine (by setting @@ -263,9 +260,6 @@ static void da8xx_musb_try_idle(struct musb *musb, unsigned long timeout) { static unsigned long last_timer; - if (!is_otg_enabled(musb)) - return; - if (timeout == 0) timeout = jiffies + msecs_to_jiffies(3); @@ -333,8 +327,7 @@ static irqreturn_t da8xx_musb_interrupt(int irq, void *hci) u8 devctl = musb_readb(mregs, MUSB_DEVCTL); int err; - err = is_host_enabled(musb) && (musb->int_usb & - MUSB_INTR_VBUSERROR); + err = musb->int_usb & USB_INTR_VBUSERROR; if (err) { /* * The Mentor core doesn't debounce VBUS as needed @@ -351,7 +344,7 @@ static irqreturn_t da8xx_musb_interrupt(int irq, void *hci) musb->xceiv->state = OTG_STATE_A_WAIT_VFALL; mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ); WARNING("VBUS error workaround (delay coming)\n"); - } else if (is_host_enabled(musb) && drvvbus) { + } else if (drvvbus) { MUSB_HST_MODE(musb); otg->default_a = 1; musb->xceiv->state = OTG_STATE_A_WAIT_VRISE; @@ -382,7 +375,7 @@ static irqreturn_t da8xx_musb_interrupt(int irq, void *hci) musb_writel(reg_base, DA8XX_USB_END_OF_INTR_REG, 0); /* Poll for ID change */ - if (is_otg_enabled(musb) && musb->xceiv->state == OTG_STATE_B_IDLE) + if (musb->xceiv->state == OTG_STATE_B_IDLE) mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ); spin_unlock_irqrestore(&musb->lock, flags); @@ -430,8 +423,7 @@ static int da8xx_musb_init(struct musb *musb) if (IS_ERR_OR_NULL(musb->xceiv)) goto fail; - if (is_host_enabled(musb)) - setup_timer(&otg_workaround, otg_timer, (unsigned long)musb); + setup_timer(&otg_workaround, otg_timer, (unsigned long)musb); /* Reset the controller */ musb_writel(reg_base, DA8XX_USB_CTRL_REG, DA8XX_SOFT_RESET_MASK); @@ -454,8 +446,7 @@ fail: static int da8xx_musb_exit(struct musb *musb) { - if (is_host_enabled(musb)) - del_timer_sync(&otg_workaround); + del_timer_sync(&otg_workaround); phy_off(); @@ -489,6 +480,7 @@ static int __devinit da8xx_probe(struct platform_device *pdev) struct clk *clk; int ret = -ENOMEM; + int musbid; glue = kzalloc(sizeof(*glue), GFP_KERNEL); if (!glue) { @@ -496,25 +488,34 @@ static int __devinit da8xx_probe(struct platform_device *pdev) goto err0; } - musb = platform_device_alloc("musb-hdrc", -1); + /* get the musb id */ + musbid = musb_get_id(&pdev->dev, GFP_KERNEL); + if (musbid < 0) { + dev_err(&pdev->dev, "failed to allocate musb id\n"); + ret = -ENOMEM; + goto err1; + } + + musb = platform_device_alloc("musb-hdrc", musbid); if (!musb) { dev_err(&pdev->dev, "failed to allocate musb device\n"); - goto err1; + goto err2; } clk = clk_get(&pdev->dev, "usb20"); if (IS_ERR(clk)) { dev_err(&pdev->dev, "failed to get clock\n"); ret = PTR_ERR(clk); - goto err2; + goto err3; } ret = clk_enable(clk); if (ret) { dev_err(&pdev->dev, "failed to enable clock\n"); - goto err3; + goto err4; } + musb->id = musbid; musb->dev.parent = &pdev->dev; musb->dev.dma_mask = &da8xx_dmamask; musb->dev.coherent_dma_mask = da8xx_dmamask; @@ -531,32 +532,35 @@ static int __devinit da8xx_probe(struct platform_device *pdev) pdev->num_resources); if (ret) { dev_err(&pdev->dev, "failed to add resources\n"); - goto err4; + goto err5; } ret = platform_device_add_data(musb, pdata, sizeof(*pdata)); if (ret) { dev_err(&pdev->dev, "failed to add platform_data\n"); - goto err4; + goto err5; } ret = platform_device_add(musb); if (ret) { dev_err(&pdev->dev, "failed to register musb device\n"); - goto err4; + goto err5; } return 0; -err4: +err5: clk_disable(clk); -err3: +err4: clk_put(clk); -err2: +err3: platform_device_put(musb); +err2: + musb_put_id(&pdev->dev, musbid); + err1: kfree(glue); @@ -568,6 +572,7 @@ static int __devexit da8xx_remove(struct platform_device *pdev) { struct da8xx_glue *glue = platform_get_drvdata(pdev); + musb_put_id(&pdev->dev, glue->musb->id); platform_device_del(glue->musb); platform_device_put(glue->musb); clk_disable(glue->clk); diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c index 472c8b42d38b..606bfd00cde6 100644 --- a/drivers/usb/musb/davinci.c +++ b/drivers/usb/musb/davinci.c @@ -33,6 +33,7 @@ #include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> +#include <linux/usb/nop-usb-xceiv.h> #include <mach/cputype.h> #include <mach/hardware.h> @@ -115,8 +116,7 @@ static void davinci_musb_enable(struct musb *musb) dma_off = 0; /* force a DRVVBUS irq so we can start polling for ID change */ - if (is_otg_enabled(musb)) - musb_writel(musb->ctrl_base, DAVINCI_USB_INT_SET_REG, + musb_writel(musb->ctrl_base, DAVINCI_USB_INT_SET_REG, DAVINCI_INTR_DRVVBUS << DAVINCI_USB_USBINT_SHIFT); } @@ -234,10 +234,8 @@ static void otg_timer(unsigned long _musb) MUSB_INTR_VBUSERROR << DAVINCI_USB_USBINT_SHIFT); break; case OTG_STATE_B_IDLE: - if (!is_peripheral_enabled(musb)) - break; - - /* There's no ID-changed IRQ, so we have no good way to tell + /* + * There's no ID-changed IRQ, so we have no good way to tell * when to switch to the A-Default state machine (by setting * the DEVCTL.SESSION flag). * @@ -315,8 +313,7 @@ static irqreturn_t davinci_musb_interrupt(int irq, void *__hci) u8 devctl = musb_readb(mregs, MUSB_DEVCTL); int err = musb->int_usb & MUSB_INTR_VBUSERROR; - err = is_host_enabled(musb) - && (musb->int_usb & MUSB_INTR_VBUSERROR); + err = musb->int_usb & MUSB_INTR_VBUSERROR; if (err) { /* The Mentor core doesn't debounce VBUS as needed * to cope with device connect current spikes. This @@ -332,7 +329,7 @@ static irqreturn_t davinci_musb_interrupt(int irq, void *__hci) musb->xceiv->state = OTG_STATE_A_WAIT_VFALL; mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ); WARNING("VBUS error workaround (delay coming)\n"); - } else if (is_host_enabled(musb) && drvvbus) { + } else if (drvvbus) { MUSB_HST_MODE(musb); otg->default_a = 1; musb->xceiv->state = OTG_STATE_A_WAIT_VRISE; @@ -365,8 +362,7 @@ static irqreturn_t davinci_musb_interrupt(int irq, void *__hci) musb_writel(tibase, DAVINCI_USB_EOI_REG, 0); /* poll for ID change */ - if (is_otg_enabled(musb) - && musb->xceiv->state == OTG_STATE_B_IDLE) + if (musb->xceiv->state == OTG_STATE_B_IDLE) mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ); spin_unlock_irqrestore(&musb->lock, flags); @@ -397,8 +393,7 @@ static int davinci_musb_init(struct musb *musb) if (revision == 0) goto fail; - if (is_host_enabled(musb)) - setup_timer(&otg_workaround, otg_timer, (unsigned long) musb); + setup_timer(&otg_workaround, otg_timer, (unsigned long) musb); davinci_musb_source_power(musb, 0, 1); @@ -419,12 +414,7 @@ static int davinci_musb_init(struct musb *musb) if (cpu_is_davinci_dm355()) { u32 deepsleep = __raw_readl(DM355_DEEPSLEEP); - if (is_host_enabled(musb)) { - deepsleep &= ~DRVVBUS_OVERRIDE; - } else { - deepsleep &= ~DRVVBUS_FORCE; - deepsleep |= DRVVBUS_OVERRIDE; - } + deepsleep &= ~DRVVBUS_FORCE; __raw_writel(deepsleep, DM355_DEEPSLEEP); } @@ -453,8 +443,7 @@ unregister: static int davinci_musb_exit(struct musb *musb) { - if (is_host_enabled(musb)) - del_timer_sync(&otg_workaround); + del_timer_sync(&otg_workaround); /* force VBUS off */ if (cpu_is_davinci_dm355()) { @@ -468,7 +457,7 @@ static int davinci_musb_exit(struct musb *musb) davinci_musb_source_power(musb, 0 /*off*/, 1); /* delay, to avoid problems with module reload */ - if (is_host_enabled(musb) && musb->xceiv->otg->default_a) { + if (musb->xceiv->otg->default_a) { int maxdelay = 30; u8 devctl, warn = 0; @@ -523,6 +512,7 @@ static int __devinit davinci_probe(struct platform_device *pdev) struct clk *clk; int ret = -ENOMEM; + int musbid; glue = kzalloc(sizeof(*glue), GFP_KERNEL); if (!glue) { @@ -530,25 +520,34 @@ static int __devinit davinci_probe(struct platform_device *pdev) goto err0; } - musb = platform_device_alloc("musb-hdrc", -1); + /* get the musb id */ + musbid = musb_get_id(&pdev->dev, GFP_KERNEL); + if (musbid < 0) { + dev_err(&pdev->dev, "failed to allocate musb id\n"); + ret = -ENOMEM; + goto err1; + } + + musb = platform_device_alloc("musb-hdrc", musbid); if (!musb) { dev_err(&pdev->dev, "failed to allocate musb device\n"); - goto err1; + goto err2; } clk = clk_get(&pdev->dev, "usb"); if (IS_ERR(clk)) { dev_err(&pdev->dev, "failed to get clock\n"); ret = PTR_ERR(clk); - goto err2; + goto err3; } ret = clk_enable(clk); if (ret) { dev_err(&pdev->dev, "failed to enable clock\n"); - goto err3; + goto err4; } + musb->id = musbid; musb->dev.parent = &pdev->dev; musb->dev.dma_mask = &davinci_dmamask; musb->dev.coherent_dma_mask = davinci_dmamask; @@ -565,32 +564,35 @@ static int __devinit davinci_probe(struct platform_device *pdev) pdev->num_resources); if (ret) { dev_err(&pdev->dev, "failed to add resources\n"); - goto err4; + goto err5; } ret = platform_device_add_data(musb, pdata, sizeof(*pdata)); if (ret) { dev_err(&pdev->dev, "failed to add platform_data\n"); - goto err4; + goto err5; } ret = platform_device_add(musb); if (ret) { dev_err(&pdev->dev, "failed to register musb device\n"); - goto err4; + goto err5; } return 0; -err4: +err5: clk_disable(clk); -err3: +err4: clk_put(clk); -err2: +err3: platform_device_put(musb); +err2: + musb_put_id(&pdev->dev, musbid); + err1: kfree(glue); @@ -602,6 +604,7 @@ static int __devexit davinci_remove(struct platform_device *pdev) { struct davinci_glue *glue = platform_get_drvdata(pdev); + musb_put_id(&pdev->dev, glue->musb->id); platform_device_del(glue->musb); platform_device_put(glue->musb); clk_disable(glue->clk); diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 26f1befb4896..bb56a0e8b23b 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -99,6 +99,8 @@ #include <linux/prefetch.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/idr.h> +#include <linux/dma-mapping.h> #include "musb_core.h" @@ -114,6 +116,7 @@ #define MUSB_DRIVER_NAME "musb-hdrc" const char musb_driver_name[] = MUSB_DRIVER_NAME; +static DEFINE_IDA(musb_ida); MODULE_DESCRIPTION(DRIVER_INFO); MODULE_AUTHOR(DRIVER_AUTHOR); @@ -130,6 +133,35 @@ static inline struct musb *dev_to_musb(struct device *dev) /*-------------------------------------------------------------------------*/ +int musb_get_id(struct device *dev, gfp_t gfp_mask) +{ + int ret; + int id; + + ret = ida_pre_get(&musb_ida, gfp_mask); + if (!ret) { + dev_err(dev, "failed to reserve resource for id\n"); + return -ENOMEM; + } + + ret = ida_get_new(&musb_ida, &id); + if (ret < 0) { + dev_err(dev, "failed to allocate a new id\n"); + return ret; + } + + return id; +} +EXPORT_SYMBOL_GPL(musb_get_id); + +void musb_put_id(struct device *dev, int id) +{ + + dev_dbg(dev, "removing id %d\n", id); + ida_remove(&musb_ida, id); +} +EXPORT_SYMBOL_GPL(musb_put_id); + #ifndef CONFIG_BLACKFIN static int musb_ulpi_read(struct usb_phy *phy, u32 offset) { @@ -234,6 +266,9 @@ void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src) struct musb *musb = hw_ep->musb; void __iomem *fifo = hw_ep->fifo; + if (unlikely(len == 0)) + return; + prefetch((u8 *)src); dev_dbg(musb->controller, "%cX ep%d fifo %p count %d buf %p\n", @@ -276,6 +311,9 @@ void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst) struct musb *musb = hw_ep->musb; void __iomem *fifo = hw_ep->fifo; + if (unlikely(len == 0)) + return; + dev_dbg(musb->controller, "%cX ep%d fifo %p count %d buf %p\n", 'R', hw_ep->epnum, fifo, len, dst); @@ -348,7 +386,7 @@ void musb_load_testpacket(struct musb *musb) /* * Handles OTG hnp timeouts, such as b_ase0_brst */ -void musb_otg_timer_func(unsigned long data) +static void musb_otg_timer_func(unsigned long data) { struct musb *musb = (struct musb *)data; unsigned long flags; @@ -643,8 +681,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, break; case OTG_STATE_B_PERIPHERAL: musb_g_suspend(musb); - musb->is_active = is_otg_enabled(musb) - && otg->gadget->b_hnp_enable; + musb->is_active = otg->gadget->b_hnp_enable; if (musb->is_active) { musb->xceiv->state = OTG_STATE_B_WAIT_ACON; dev_dbg(musb->controller, "HNP: Setting timer for b_ase0_brst\n"); @@ -660,8 +697,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, break; case OTG_STATE_A_HOST: musb->xceiv->state = OTG_STATE_A_SUSPEND; - musb->is_active = is_otg_enabled(musb) - && otg->host->b_hnp_enable; + musb->is_active = otg->host->b_hnp_enable; break; case OTG_STATE_B_HOST: /* Transition to B_PERIPHERAL, see 6.8.2.6 p 44 */ @@ -749,7 +785,7 @@ b_host: case OTG_STATE_A_SUSPEND: usb_hcd_resume_root_hub(musb_to_hcd(musb)); musb_root_disconnect(musb); - if (musb->a_wait_bcon != 0 && is_otg_enabled(musb)) + if (musb->a_wait_bcon != 0) musb_platform_try_idle(musb, jiffies + msecs_to_jiffies(musb->a_wait_bcon)); break; @@ -787,7 +823,7 @@ b_host: */ if (int_usb & MUSB_INTR_RESET) { handled = IRQ_HANDLED; - if (is_host_capable() && (devctl & MUSB_DEVCTL_HM) != 0) { + if ((devctl & MUSB_DEVCTL_HM) != 0) { /* * Looks like non-HS BABBLE can be ignored, but * HS BABBLE is an error condition. For HS the solution @@ -801,7 +837,7 @@ b_host: ERR("Stopping host session -- babble\n"); musb_writeb(musb->mregs, MUSB_DEVCTL, 0); } - } else if (is_peripheral_capable()) { + } else { dev_dbg(musb->controller, "BUS RESET as %s\n", otg_state_string(musb->xceiv->state)); switch (musb->xceiv->state) { @@ -925,25 +961,16 @@ void musb_start(struct musb *musb) devctl = musb_readb(regs, MUSB_DEVCTL); devctl &= ~MUSB_DEVCTL_SESSION; - if (is_otg_enabled(musb)) { - /* session started after: - * (a) ID-grounded irq, host mode; - * (b) vbus present/connect IRQ, peripheral mode; - * (c) peripheral initiates, using SRP - */ - if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS) - musb->is_active = 1; - else - devctl |= MUSB_DEVCTL_SESSION; - - } else if (is_host_enabled(musb)) { - /* assume ID pin is hard-wired to ground */ + /* session started after: + * (a) ID-grounded irq, host mode; + * (b) vbus present/connect IRQ, peripheral mode; + * (c) peripheral initiates, using SRP + */ + if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS) + musb->is_active = 1; + else devctl |= MUSB_DEVCTL_SESSION; - } else /* peripheral is enabled */ { - if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS) - musb->is_active = 1; - } musb_platform_enable(musb); musb_writeb(regs, MUSB_DEVCTL, devctl); } @@ -1007,8 +1034,6 @@ static void musb_shutdown(struct platform_device *pdev) musb_generic_disable(musb); spin_unlock_irqrestore(&musb->lock, flags); - if (!is_otg_enabled(musb) && is_host_enabled(musb)) - usb_remove_hcd(musb_to_hcd(musb)); musb_writeb(musb->mregs, MUSB_DEVCTL, 0); musb_platform_exit(musb); @@ -1302,7 +1327,7 @@ done: if (offset < 0) { pr_debug("%s: mem overrun, ep %d\n", musb_driver_name, epn); - return -EINVAL; + return offset; } epn++; musb->nr_endpoints = max(epn, musb->nr_endpoints); @@ -1330,7 +1355,7 @@ static int __devinit ep_config_from_hw(struct musb *musb) { u8 epnum = 0; struct musb_hw_ep *hw_ep; - void *mbase = musb->mregs; + void __iomem *mbase = musb->mregs; int ret = 0; dev_dbg(musb->controller, "<== static silicon ep config\n"); @@ -1571,13 +1596,10 @@ irqreturn_t musb_interrupt(struct musb *musb) /* musb_ep_select(musb->mregs, ep_num); */ /* REVISIT just retval = ep->rx_irq(...) */ retval = IRQ_HANDLED; - if (devctl & MUSB_DEVCTL_HM) { - if (is_host_capable()) - musb_host_rx(musb, ep_num); - } else { - if (is_peripheral_capable()) - musb_g_rx(musb, ep_num); - } + if (devctl & MUSB_DEVCTL_HM) + musb_host_rx(musb, ep_num); + else + musb_g_rx(musb, ep_num); } reg >>= 1; @@ -1592,13 +1614,10 @@ irqreturn_t musb_interrupt(struct musb *musb) /* musb_ep_select(musb->mregs, ep_num); */ /* REVISIT just retval |= ep->tx_irq(...) */ retval = IRQ_HANDLED; - if (devctl & MUSB_DEVCTL_HM) { - if (is_host_capable()) - musb_host_tx(musb, ep_num); - } else { - if (is_peripheral_capable()) - musb_g_tx(musb, ep_num); - } + if (devctl & MUSB_DEVCTL_HM) + musb_host_tx(musb, ep_num); + else + musb_g_tx(musb, ep_num); } reg >>= 1; ep_num++; @@ -1634,22 +1653,16 @@ void musb_dma_completion(struct musb *musb, u8 epnum, u8 transmit) } else { /* endpoints 1..15 */ if (transmit) { - if (devctl & MUSB_DEVCTL_HM) { - if (is_host_capable()) - musb_host_tx(musb, epnum); - } else { - if (is_peripheral_capable()) - musb_g_tx(musb, epnum); - } + if (devctl & MUSB_DEVCTL_HM) + musb_host_tx(musb, epnum); + else + musb_g_tx(musb, epnum); } else { /* receive */ - if (devctl & MUSB_DEVCTL_HM) { - if (is_host_capable()) - musb_host_rx(musb, epnum); - } else { - if (is_peripheral_capable()) - musb_g_rx(musb, epnum); - } + if (devctl & MUSB_DEVCTL_HM) + musb_host_rx(musb, epnum); + else + musb_g_rx(musb, epnum); } } } @@ -1785,10 +1798,9 @@ static const struct attribute_group musb_attr_group = { static void musb_irq_work(struct work_struct *data) { struct musb *musb = container_of(data, struct musb, irq_work); - static int old_state; - if (musb->xceiv->state != old_state) { - old_state = musb->xceiv->state; + if (musb->xceiv->state != musb->xceiv_old_state) { + musb->xceiv_old_state = musb->xceiv->state; sysfs_notify(&musb->controller->kobj, NULL, "mode"); } } @@ -1862,15 +1874,15 @@ static void musb_free(struct musb *musb) dma_controller_destroy(c); } - kfree(musb); + usb_put_hcd(musb_to_hcd(musb)); } /* * Perform generic per-controller initialization. * - * @pDevice: the controller (already clocked, etc) - * @nIrq: irq - * @mregs: virtual address of controller registers, + * @dev: the controller (already clocked, etc) + * @nIrq: IRQ number + * @ctrl: virtual address of controller registers, * not yet corrected for platform-specific offsets */ static int __devinit @@ -1879,6 +1891,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) int status; struct musb *musb; struct musb_hdrc_platform_data *plat = dev->platform_data; + struct usb_hcd *hcd; /* The driver might handle more features than the board; OK. * Fail when the board needs a feature that's not enabled. @@ -1901,7 +1914,6 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) pm_runtime_enable(musb->controller); spin_lock_init(&musb->lock); - musb->board_mode = plat->mode; musb->board_set_power = plat->set_power; musb->min_power = plat->min_power; musb->ops = plat->platform_ops; @@ -1972,7 +1984,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) goto fail3; } musb->nIrq = nIrq; -/* FIXME this handles wakeup irqs wrong */ + /* FIXME this handles wakeup irqs wrong */ if (enable_irq_wake(nIrq) == 0) { musb->irq_wake = 1; device_init_wakeup(dev, 1); @@ -1981,58 +1993,25 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) } /* host side needs more setup */ - if (is_host_enabled(musb)) { - struct usb_hcd *hcd = musb_to_hcd(musb); - - otg_set_host(musb->xceiv->otg, &hcd->self); - - if (is_otg_enabled(musb)) - hcd->self.otg_port = 1; - musb->xceiv->otg->host = &hcd->self; - hcd->power_budget = 2 * (plat->power ? : 250); - - /* program PHY to use external vBus if required */ - if (plat->extvbus) { - u8 busctl = musb_read_ulpi_buscontrol(musb->mregs); - busctl |= MUSB_ULPI_USE_EXTVBUS; - musb_write_ulpi_buscontrol(musb->mregs, busctl); - } + hcd = musb_to_hcd(musb); + otg_set_host(musb->xceiv->otg, &hcd->self); + hcd->self.otg_port = 1; + musb->xceiv->otg->host = &hcd->self; + hcd->power_budget = 2 * (plat->power ? : 250); + + /* program PHY to use external vBus if required */ + if (plat->extvbus) { + u8 busctl = musb_read_ulpi_buscontrol(musb->mregs); + busctl |= MUSB_ULPI_USE_EXTVBUS; + musb_write_ulpi_buscontrol(musb->mregs, busctl); } - /* For the host-only role, we can activate right away. - * (We expect the ID pin to be forcibly grounded!!) - * Otherwise, wait till the gadget driver hooks up. - */ - if (!is_otg_enabled(musb) && is_host_enabled(musb)) { - struct usb_hcd *hcd = musb_to_hcd(musb); - - MUSB_HST_MODE(musb); - musb->xceiv->otg->default_a = 1; - musb->xceiv->state = OTG_STATE_A_IDLE; - - status = usb_add_hcd(musb_to_hcd(musb), 0, 0); - - hcd->self.uses_pio_for_control = 1; - dev_dbg(musb->controller, "%s mode, status %d, devctl %02x %c\n", - "HOST", status, - musb_readb(musb->mregs, MUSB_DEVCTL), - (musb_readb(musb->mregs, MUSB_DEVCTL) - & MUSB_DEVCTL_BDEVICE - ? 'B' : 'A')); - - } else /* peripheral is enabled */ { - MUSB_DEV_MODE(musb); - musb->xceiv->otg->default_a = 0; - musb->xceiv->state = OTG_STATE_B_IDLE; - - status = musb_gadget_setup(musb); + MUSB_DEV_MODE(musb); + musb->xceiv->otg->default_a = 0; + musb->xceiv->state = OTG_STATE_B_IDLE; - dev_dbg(musb->controller, "%s mode, status %d, dev%02x\n", - is_otg_enabled(musb) ? "OTG" : "PERIPHERAL", - status, - musb_readb(musb->mregs, MUSB_DEVCTL)); + status = musb_gadget_setup(musb); - } if (status < 0) goto fail3; @@ -2048,28 +2027,13 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) pm_runtime_put(musb->controller); - dev_info(dev, "USB %s mode controller at %p using %s, IRQ %d\n", - ({char *s; - switch (musb->board_mode) { - case MUSB_HOST: s = "Host"; break; - case MUSB_PERIPHERAL: s = "Peripheral"; break; - default: s = "OTG"; break; - }; s; }), - ctrl, - (is_dma_capable() && musb->dma_controller) - ? "DMA" : "PIO", - musb->nIrq); - return 0; fail5: musb_exit_debugfs(musb); fail4: - if (!is_otg_enabled(musb) && is_host_enabled(musb)) - usb_remove_hcd(musb_to_hcd(musb)); - else - musb_gadget_cleanup(musb); + musb_gadget_cleanup(musb); fail3: pm_runtime_put_sync(musb->controller); @@ -2096,11 +2060,6 @@ fail0: /* all implementations (PCI bridge to FPGA, VLYNQ, etc) should just * bridge to a platform device; this driver then suffices. */ - -#ifndef CONFIG_MUSB_PIO_ONLY -static u64 *orig_dma_mask; -#endif - static int __devinit musb_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; @@ -2119,10 +2078,6 @@ static int __devinit musb_probe(struct platform_device *pdev) return -ENOMEM; } -#ifndef CONFIG_MUSB_PIO_ONLY - /* clobbered by use_dma=n */ - orig_dma_mask = dev->dma_mask; -#endif status = musb_init_controller(dev, irq, base); if (status < 0) iounmap(base); @@ -2132,7 +2087,8 @@ static int __devinit musb_probe(struct platform_device *pdev) static int __devexit musb_remove(struct platform_device *pdev) { - struct musb *musb = dev_to_musb(&pdev->dev); + struct device *dev = &pdev->dev; + struct musb *musb = dev_to_musb(dev); void __iomem *ctrl_base = musb->ctrl_base; /* this gets called on rmmod. @@ -2145,9 +2101,9 @@ static int __devexit musb_remove(struct platform_device *pdev) musb_free(musb); iounmap(ctrl_base); - device_init_wakeup(&pdev->dev, 0); + device_init_wakeup(dev, 0); #ifndef CONFIG_MUSB_PIO_ONLY - pdev->dev.dma_mask = orig_dma_mask; + dma_set_mask(dev, *dev->parent->dma_mask); #endif return 0; } @@ -2160,11 +2116,9 @@ static void musb_save_context(struct musb *musb) void __iomem *musb_base = musb->mregs; void __iomem *epio; - if (is_host_enabled(musb)) { - musb->context.frame = musb_readw(musb_base, MUSB_FRAME); - musb->context.testmode = musb_readb(musb_base, MUSB_TESTMODE); - musb->context.busctl = musb_read_ulpi_buscontrol(musb->mregs); - } + musb->context.frame = musb_readw(musb_base, MUSB_FRAME); + musb->context.testmode = musb_readb(musb_base, MUSB_TESTMODE); + musb->context.busctl = musb_read_ulpi_buscontrol(musb->mregs); musb->context.power = musb_readb(musb_base, MUSB_POWER); musb->context.intrtxe = musb_readw(musb_base, MUSB_INTRTXE); musb->context.intrrxe = musb_readw(musb_base, MUSB_INTRRXE); @@ -2203,30 +2157,29 @@ static void musb_save_context(struct musb *musb) musb->context.index_regs[i].rxfifosz = musb_read_rxfifosz(musb_base); } - if (is_host_enabled(musb)) { - musb->context.index_regs[i].txtype = - musb_readb(epio, MUSB_TXTYPE); - musb->context.index_regs[i].txinterval = - musb_readb(epio, MUSB_TXINTERVAL); - musb->context.index_regs[i].rxtype = - musb_readb(epio, MUSB_RXTYPE); - musb->context.index_regs[i].rxinterval = - musb_readb(epio, MUSB_RXINTERVAL); - - musb->context.index_regs[i].txfunaddr = - musb_read_txfunaddr(musb_base, i); - musb->context.index_regs[i].txhubaddr = - musb_read_txhubaddr(musb_base, i); - musb->context.index_regs[i].txhubport = - musb_read_txhubport(musb_base, i); - - musb->context.index_regs[i].rxfunaddr = - musb_read_rxfunaddr(musb_base, i); - musb->context.index_regs[i].rxhubaddr = - musb_read_rxhubaddr(musb_base, i); - musb->context.index_regs[i].rxhubport = - musb_read_rxhubport(musb_base, i); - } + + musb->context.index_regs[i].txtype = + musb_readb(epio, MUSB_TXTYPE); + musb->context.index_regs[i].txinterval = + musb_readb(epio, MUSB_TXINTERVAL); + musb->context.index_regs[i].rxtype = + musb_readb(epio, MUSB_RXTYPE); + musb->context.index_regs[i].rxinterval = + musb_readb(epio, MUSB_RXINTERVAL); + + musb->context.index_regs[i].txfunaddr = + musb_read_txfunaddr(musb_base, i); + musb->context.index_regs[i].txhubaddr = + musb_read_txhubaddr(musb_base, i); + musb->context.index_regs[i].txhubport = + musb_read_txhubport(musb_base, i); + + musb->context.index_regs[i].rxfunaddr = + musb_read_rxfunaddr(musb_base, i); + musb->context.index_regs[i].rxhubaddr = + musb_read_rxhubaddr(musb_base, i); + musb->context.index_regs[i].rxhubport = + musb_read_rxhubport(musb_base, i); } } @@ -2237,11 +2190,9 @@ static void musb_restore_context(struct musb *musb) void __iomem *ep_target_regs; void __iomem *epio; - if (is_host_enabled(musb)) { - musb_writew(musb_base, MUSB_FRAME, musb->context.frame); - musb_writeb(musb_base, MUSB_TESTMODE, musb->context.testmode); - musb_write_ulpi_buscontrol(musb->mregs, musb->context.busctl); - } + musb_writew(musb_base, MUSB_FRAME, musb->context.frame); + musb_writeb(musb_base, MUSB_TESTMODE, musb->context.testmode); + musb_write_ulpi_buscontrol(musb->mregs, musb->context.busctl); musb_writeb(musb_base, MUSB_POWER, musb->context.power); musb_writew(musb_base, MUSB_INTRTXE, musb->context.intrtxe); musb_writew(musb_base, MUSB_INTRRXE, musb->context.intrrxe); @@ -2280,33 +2231,31 @@ static void musb_restore_context(struct musb *musb) musb->context.index_regs[i].rxfifoadd); } - if (is_host_enabled(musb)) { - musb_writeb(epio, MUSB_TXTYPE, + musb_writeb(epio, MUSB_TXTYPE, musb->context.index_regs[i].txtype); - musb_writeb(epio, MUSB_TXINTERVAL, + musb_writeb(epio, MUSB_TXINTERVAL, musb->context.index_regs[i].txinterval); - musb_writeb(epio, MUSB_RXTYPE, + musb_writeb(epio, MUSB_RXTYPE, musb->context.index_regs[i].rxtype); - musb_writeb(epio, MUSB_RXINTERVAL, + musb_writeb(epio, MUSB_RXINTERVAL, - musb->context.index_regs[i].rxinterval); - musb_write_txfunaddr(musb_base, i, + musb->context.index_regs[i].rxinterval); + musb_write_txfunaddr(musb_base, i, musb->context.index_regs[i].txfunaddr); - musb_write_txhubaddr(musb_base, i, + musb_write_txhubaddr(musb_base, i, musb->context.index_regs[i].txhubaddr); - musb_write_txhubport(musb_base, i, + musb_write_txhubport(musb_base, i, musb->context.index_regs[i].txhubport); - ep_target_regs = - musb_read_target_reg_base(i, musb_base); + ep_target_regs = + musb_read_target_reg_base(i, musb_base); - musb_write_rxfunaddr(ep_target_regs, + musb_write_rxfunaddr(ep_target_regs, musb->context.index_regs[i].rxfunaddr); - musb_write_rxhubaddr(ep_target_regs, + musb_write_rxhubaddr(ep_target_regs, musb->context.index_regs[i].rxhubaddr); - musb_write_rxhubport(ep_target_regs, + musb_write_rxhubport(ep_target_regs, musb->context.index_regs[i].rxhubport); - } } musb_writeb(musb_base, MUSB_INDEX, musb->context.index); } diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index 586105b55a7c..c158aacd6de8 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -71,10 +71,6 @@ struct musb_ep; #include <linux/usb/hcd.h> #include "musb_host.h" -#define is_peripheral_enabled(musb) ((musb)->board_mode != MUSB_HOST) -#define is_host_enabled(musb) ((musb)->board_mode != MUSB_PERIPHERAL) -#define is_otg_enabled(musb) ((musb)->board_mode == MUSB_OTG) - /* NOTE: otg and peripheral-only state machines start at B_IDLE. * OTG or host-only go to A_IDLE when ID is sensed. */ @@ -88,8 +84,6 @@ struct musb_ep; /****************************** PERIPHERAL ROLE *****************************/ -#define is_peripheral_capable() (1) - extern irqreturn_t musb_g_ep0_irq(struct musb *); extern void musb_g_tx(struct musb *, u8); extern void musb_g_rx(struct musb *, u8); @@ -101,8 +95,6 @@ extern void musb_g_disconnect(struct musb *); /****************************** HOST ROLE ***********************************/ -#define is_host_capable() (1) - extern irqreturn_t musb_h_ep0_irq(struct musb *); extern void musb_host_tx(struct musb *, u8); extern void musb_host_rx(struct musb *, u8); @@ -376,7 +368,6 @@ struct musb { u16 epmask; u8 nr_endpoints; - u8 board_mode; /* enum musb_mode */ int (*board_set_power)(int state); u8 min_power; /* vbus for periph, in mA/2 */ @@ -446,6 +437,10 @@ struct musb { #ifdef MUSB_CONFIG_PROC_FS struct proc_dir_entry *proc_entry; #endif + int xceiv_old_state; +#ifdef CONFIG_DEBUG_FS + struct dentry *debugfs_root; +#endif }; static inline struct musb *gadget_to_musb(struct usb_gadget *g) @@ -484,7 +479,7 @@ static inline void musb_configure_ep0(struct musb *musb) static inline int musb_read_fifosize(struct musb *musb, struct musb_hw_ep *hw_ep, u8 epnum) { - void *mbase = musb->mregs; + void __iomem *mbase = musb->mregs; u8 reg = 0; /* read from core using indexed model */ @@ -526,6 +521,8 @@ extern const char musb_driver_name[]; extern void musb_start(struct musb *musb); extern void musb_stop(struct musb *musb); +extern int musb_get_id(struct device *dev, gfp_t gfp_mask); +extern void musb_put_id(struct device *dev, int id); extern void musb_write_fifo(struct musb_hw_ep *ep, u16 len, const u8 *src); extern void musb_read_fifo(struct musb_hw_ep *ep, u16 len, u8 *dst); diff --git a/drivers/usb/musb/musb_debugfs.c b/drivers/usb/musb/musb_debugfs.c index 40a37c91cc10..1d6e8af94c06 100644 --- a/drivers/usb/musb/musb_debugfs.c +++ b/drivers/usb/musb/musb_debugfs.c @@ -103,8 +103,6 @@ static const struct musb_register_map musb_regmap[] = { { } /* Terminating Entry */ }; -static struct dentry *musb_debugfs_root; - static int musb_regdump_show(struct seq_file *s, void *unused) { struct musb *musb = s->private; @@ -241,7 +239,7 @@ int __devinit musb_init_debugfs(struct musb *musb) struct dentry *file; int ret; - root = debugfs_create_dir("musb", NULL); + root = debugfs_create_dir(dev_name(musb->controller), NULL); if (!root) { ret = -ENOMEM; goto err0; @@ -261,7 +259,7 @@ int __devinit musb_init_debugfs(struct musb *musb) goto err1; } - musb_debugfs_root = root; + musb->debugfs_root = root; return 0; @@ -274,5 +272,5 @@ err0: void /* __init_or_exit */ musb_exit_debugfs(struct musb *musb) { - debugfs_remove_recursive(musb_debugfs_root); + debugfs_remove_recursive(musb->debugfs_root); } diff --git a/drivers/usb/musb/musb_dma.h b/drivers/usb/musb/musb_dma.h index 3a97c4e2d4f5..24d39210d4ab 100644 --- a/drivers/usb/musb/musb_dma.h +++ b/drivers/usb/musb/musb_dma.h @@ -178,7 +178,7 @@ struct dma_controller { extern void musb_dma_completion(struct musb *musb, u8 epnum, u8 transmit); -extern struct dma_controller *__init +extern struct dma_controller *__devinit dma_controller_create(struct musb *, void __iomem *); extern void dma_controller_destroy(struct dma_controller *); diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c index 494772fc9e23..444346e1e10d 100644 --- a/drivers/usb/musb/musb_dsps.c +++ b/drivers/usb/musb/musb_dsps.c @@ -31,11 +31,13 @@ #include <linux/init.h> #include <linux/io.h> +#include <linux/of.h> #include <linux/err.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <linux/pm_runtime.h> #include <linux/module.h> +#include <linux/usb/nop-usb-xceiv.h> #include <linux/of.h> #include <linux/of_device.h> @@ -45,6 +47,10 @@ #include "musb_core.h" +#ifdef CONFIG_OF +static const struct of_device_id musb_dsps_of_match[]; +#endif + /** * avoid using musb_readx()/musb_writex() as glue layer should not be * dependent on musb core layer symbols. @@ -105,6 +111,8 @@ struct dsps_musb_wrapper { /* miscellaneous stuff */ u32 musb_core_offset; u8 poll_seconds; + /* number of musb instances */ + u8 instances; }; /** @@ -112,9 +120,10 @@ struct dsps_musb_wrapper { */ struct dsps_glue { struct device *dev; - struct platform_device *musb; /* child musb pdev */ + struct platform_device *musb[2]; /* child musb pdev */ const struct dsps_musb_wrapper *wrp; /* wrapper register offsets */ - struct timer_list timer; /* otg_workaround timer */ + struct timer_list timer[2]; /* otg_workaround timer */ + unsigned long last_timer[2]; /* last timer data for each instance */ }; /** @@ -137,9 +146,8 @@ static void dsps_musb_enable(struct musb *musb) dsps_writel(reg_base, wrp->epintr_set, epmask); dsps_writel(reg_base, wrp->coreintr_set, coremask); /* Force the DRVVBUS IRQ so we can start polling for ID change. */ - if (is_otg_enabled(musb)) - dsps_writel(reg_base, wrp->coreintr_set, - (1 << wrp->drvvbus) << wrp->usb_shift); + dsps_writel(reg_base, wrp->coreintr_set, + (1 << wrp->drvvbus) << wrp->usb_shift); } /** @@ -165,8 +173,8 @@ static void otg_timer(unsigned long _musb) struct musb *musb = (void *)_musb; void __iomem *mregs = musb->mregs; struct device *dev = musb->controller; - struct platform_device *pdev = to_platform_device(dev->parent); - struct dsps_glue *glue = platform_get_drvdata(pdev); + struct platform_device *pdev = to_platform_device(dev); + struct dsps_glue *glue = dev_get_drvdata(dev->parent); const struct dsps_musb_wrapper *wrp = glue->wrp; u8 devctl; unsigned long flags; @@ -200,12 +208,9 @@ static void otg_timer(unsigned long _musb) MUSB_INTR_VBUSERROR << wrp->usb_shift); break; case OTG_STATE_B_IDLE: - if (!is_peripheral_enabled(musb)) - break; - devctl = dsps_readb(mregs, MUSB_DEVCTL); if (devctl & MUSB_DEVCTL_BDEVICE) - mod_timer(&glue->timer, + mod_timer(&glue->timer[pdev->id], jiffies + wrp->poll_seconds * HZ); else musb->xceiv->state = OTG_STATE_A_IDLE; @@ -219,12 +224,8 @@ static void otg_timer(unsigned long _musb) static void dsps_musb_try_idle(struct musb *musb, unsigned long timeout) { struct device *dev = musb->controller; - struct platform_device *pdev = to_platform_device(dev->parent); - struct dsps_glue *glue = platform_get_drvdata(pdev); - static unsigned long last_timer; - - if (!is_otg_enabled(musb)) - return; + struct platform_device *pdev = to_platform_device(dev); + struct dsps_glue *glue = dev_get_drvdata(dev->parent); if (timeout == 0) timeout = jiffies + msecs_to_jiffies(3); @@ -234,22 +235,23 @@ static void dsps_musb_try_idle(struct musb *musb, unsigned long timeout) musb->xceiv->state == OTG_STATE_A_WAIT_BCON)) { dev_dbg(musb->controller, "%s active, deleting timer\n", otg_state_string(musb->xceiv->state)); - del_timer(&glue->timer); - last_timer = jiffies; + del_timer(&glue->timer[pdev->id]); + glue->last_timer[pdev->id] = jiffies; return; } - if (time_after(last_timer, timeout) && timer_pending(&glue->timer)) { + if (time_after(glue->last_timer[pdev->id], timeout) && + timer_pending(&glue->timer[pdev->id])) { dev_dbg(musb->controller, "Longer idle timer already pending, ignoring...\n"); return; } - last_timer = timeout; + glue->last_timer[pdev->id] = timeout; dev_dbg(musb->controller, "%s inactive, starting idle timer for %u ms\n", otg_state_string(musb->xceiv->state), jiffies_to_msecs(timeout - jiffies)); - mod_timer(&glue->timer, timeout); + mod_timer(&glue->timer[pdev->id], timeout); } static irqreturn_t dsps_interrupt(int irq, void *hci) @@ -257,8 +259,8 @@ static irqreturn_t dsps_interrupt(int irq, void *hci) struct musb *musb = hci; void __iomem *reg_base = musb->ctrl_base; struct device *dev = musb->controller; - struct platform_device *pdev = to_platform_device(dev->parent); - struct dsps_glue *glue = platform_get_drvdata(pdev); + struct platform_device *pdev = to_platform_device(dev); + struct dsps_glue *glue = dev_get_drvdata(dev->parent); const struct dsps_musb_wrapper *wrp = glue->wrp; unsigned long flags; irqreturn_t ret = IRQ_NONE; @@ -293,7 +295,7 @@ static irqreturn_t dsps_interrupt(int irq, void *hci) * value but DEVCTL.BDEVICE is invalid without DEVCTL.SESSION set. * Also, DRVVBUS pulses for SRP (but not at 5V) ... */ - if ((usbintr & MUSB_INTR_BABBLE) && is_host_enabled(musb)) + if (usbintr & MUSB_INTR_BABBLE) pr_info("CAUTION: musb: Babble Interrupt Occured\n"); if (usbintr & ((1 << wrp->drvvbus) << wrp->usb_shift)) { @@ -302,8 +304,7 @@ static irqreturn_t dsps_interrupt(int irq, void *hci) u8 devctl = dsps_readb(mregs, MUSB_DEVCTL); int err; - err = is_host_enabled(musb) && (musb->int_usb & - MUSB_INTR_VBUSERROR); + err = musb->int_usb & MUSB_INTR_VBUSERROR; if (err) { /* * The Mentor core doesn't debounce VBUS as needed @@ -318,15 +319,15 @@ static irqreturn_t dsps_interrupt(int irq, void *hci) */ musb->int_usb &= ~MUSB_INTR_VBUSERROR; musb->xceiv->state = OTG_STATE_A_WAIT_VFALL; - mod_timer(&glue->timer, + mod_timer(&glue->timer[pdev->id], jiffies + wrp->poll_seconds * HZ); WARNING("VBUS error workaround (delay coming)\n"); - } else if (is_host_enabled(musb) && drvvbus) { + } else if (drvvbus) { musb->is_active = 1; MUSB_HST_MODE(musb); musb->xceiv->otg->default_a = 1; musb->xceiv->state = OTG_STATE_A_WAIT_VRISE; - del_timer(&glue->timer); + del_timer(&glue->timer[pdev->id]); } else { musb->is_active = 0; MUSB_DEV_MODE(musb); @@ -352,8 +353,9 @@ static irqreturn_t dsps_interrupt(int irq, void *hci) dsps_writel(reg_base, wrp->eoi, 1); /* Poll for ID change */ - if (is_otg_enabled(musb) && musb->xceiv->state == OTG_STATE_B_IDLE) - mod_timer(&glue->timer, jiffies + wrp->poll_seconds * HZ); + if (musb->xceiv->state == OTG_STATE_B_IDLE) + mod_timer(&glue->timer[pdev->id], + jiffies + wrp->poll_seconds * HZ); spin_unlock_irqrestore(&musb->lock, flags); @@ -364,8 +366,8 @@ static int dsps_musb_init(struct musb *musb) { struct device *dev = musb->controller; struct musb_hdrc_platform_data *plat = dev->platform_data; - struct platform_device *pdev = to_platform_device(dev->parent); - struct dsps_glue *glue = platform_get_drvdata(pdev); + struct platform_device *pdev = to_platform_device(dev); + struct dsps_glue *glue = dev_get_drvdata(dev->parent); const struct dsps_musb_wrapper *wrp = glue->wrp; struct omap_musb_board_data *data = plat->board_data; void __iomem *reg_base = musb->ctrl_base; @@ -375,8 +377,7 @@ static int dsps_musb_init(struct musb *musb) /* mentor core register starts at offset of 0x400 from musb base */ musb->mregs += wrp->musb_core_offset; - /* NOP driver needs change if supporting dual instance */ - usb_nop_xceiv_register(); + /* Get the NOP PHY */ musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2); if (IS_ERR_OR_NULL(musb->xceiv)) return -ENODEV; @@ -388,8 +389,7 @@ static int dsps_musb_init(struct musb *musb) goto err0; } - if (is_host_enabled(musb)) - setup_timer(&glue->timer, otg_timer, (unsigned long) musb); + setup_timer(&glue->timer[pdev->id], otg_timer, (unsigned long) musb); /* Reset the musb */ dsps_writel(reg_base, wrp->control, (1 << wrp->reset)); @@ -420,11 +420,10 @@ static int dsps_musb_exit(struct musb *musb) struct device *dev = musb->controller; struct musb_hdrc_platform_data *plat = dev->platform_data; struct omap_musb_board_data *data = plat->board_data; - struct platform_device *pdev = to_platform_device(dev->parent); - struct dsps_glue *glue = platform_get_drvdata(pdev); + struct platform_device *pdev = to_platform_device(dev); + struct dsps_glue *glue = dev_get_drvdata(dev->parent); - if (is_host_enabled(musb)) - del_timer_sync(&glue->timer); + del_timer_sync(&glue->timer[pdev->id]); /* Shutdown the on-chip PHY and its PLL. */ if (data->set_phy_power) @@ -454,11 +453,13 @@ static int __devinit dsps_create_musb_pdev(struct dsps_glue *glue, u8 id) struct device *dev = glue->dev; struct platform_device *pdev = to_platform_device(dev); struct musb_hdrc_platform_data *pdata = dev->platform_data; + struct device_node *np = pdev->dev.of_node; + struct musb_hdrc_config *config; struct platform_device *musb; struct resource *res; struct resource resources[2]; char res_name[10]; - int ret; + int ret, musbid; /* get memory resource */ sprintf(res_name, "musb%d", id); @@ -483,62 +484,107 @@ static int __devinit dsps_create_musb_pdev(struct dsps_glue *glue, u8 id) resources[1] = *res; resources[1].name = "mc"; + /* get the musb id */ + musbid = musb_get_id(dev, GFP_KERNEL); + if (musbid < 0) { + dev_err(dev, "failed to allocate musb id\n"); + ret = -ENOMEM; + goto err0; + } /* allocate the child platform device */ - musb = platform_device_alloc("musb-hdrc", -1); + musb = platform_device_alloc("musb-hdrc", musbid); if (!musb) { dev_err(dev, "failed to allocate musb device\n"); ret = -ENOMEM; - goto err0; + goto err1; } + musb->id = musbid; musb->dev.parent = dev; musb->dev.dma_mask = &musb_dmamask; musb->dev.coherent_dma_mask = musb_dmamask; - glue->musb = musb; - - pdata->platform_ops = &dsps_ops; + glue->musb[id] = musb; ret = platform_device_add_resources(musb, resources, 2); if (ret) { dev_err(dev, "failed to add resources\n"); - goto err1; + goto err2; } + if (np) { + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) { + dev_err(&pdev->dev, + "failed to allocate musb platfrom data\n"); + ret = -ENOMEM; + goto err2; + } + + config = devm_kzalloc(&pdev->dev, sizeof(*config), GFP_KERNEL); + if (!config) { + dev_err(&pdev->dev, + "failed to allocate musb hdrc config\n"); + goto err2; + } + + of_property_read_u32(np, "num-eps", (u32 *)&config->num_eps); + of_property_read_u32(np, "ram-bits", (u32 *)&config->ram_bits); + sprintf(res_name, "port%d-mode", id); + of_property_read_u32(np, res_name, (u32 *)&pdata->mode); + of_property_read_u32(np, "power", (u32 *)&pdata->power); + config->multipoint = of_property_read_bool(np, "multipoint"); + + pdata->config = config; + } + + pdata->platform_ops = &dsps_ops; + ret = platform_device_add_data(musb, pdata, sizeof(*pdata)); if (ret) { dev_err(dev, "failed to add platform_data\n"); - goto err1; + goto err2; } ret = platform_device_add(musb); if (ret) { dev_err(dev, "failed to register musb device\n"); - goto err1; + goto err2; } return 0; -err1: +err2: platform_device_put(musb); +err1: + musb_put_id(dev, musbid); err0: return ret; } -static void __devexit dsps_delete_musb_pdev(struct dsps_glue *glue) +static void dsps_delete_musb_pdev(struct dsps_glue *glue, u8 id) { - platform_device_del(glue->musb); - platform_device_put(glue->musb); + musb_put_id(glue->dev, glue->musb[id]->id); + platform_device_del(glue->musb[id]); + platform_device_put(glue->musb[id]); } static int __devinit dsps_probe(struct platform_device *pdev) { - const struct platform_device_id *id = platform_get_device_id(pdev); - const struct dsps_musb_wrapper *wrp = - (struct dsps_musb_wrapper *)id->driver_data; + struct device_node *np = pdev->dev.of_node; + const struct of_device_id *match; + const struct dsps_musb_wrapper *wrp; struct dsps_glue *glue; struct resource *iomem; - int ret; + int ret, i; + + match = of_match_node(musb_dsps_of_match, np); + if (!match) { + dev_err(&pdev->dev, "fail to get matching of_match struct\n"); + ret = -EINVAL; + goto err0; + } + wrp = match->data; /* allocate glue */ glue = kzalloc(sizeof(*glue), GFP_KERNEL); @@ -575,11 +621,16 @@ static int __devinit dsps_probe(struct platform_device *pdev) goto err2; } - /* create the child platform device for first instances of musb */ - ret = dsps_create_musb_pdev(glue, 0); - if (ret != 0) { - dev_err(&pdev->dev, "failed to create child pdev\n"); - goto err3; + /* create the child platform device for all instances of musb */ + for (i = 0; i < wrp->instances ; i++) { + ret = dsps_create_musb_pdev(glue, i); + if (ret != 0) { + dev_err(&pdev->dev, "failed to create child pdev\n"); + /* release resources of previously created instances */ + for (i--; i >= 0 ; i--) + dsps_delete_musb_pdev(glue, i); + goto err3; + } } return 0; @@ -597,9 +648,12 @@ err0: static int __devexit dsps_remove(struct platform_device *pdev) { struct dsps_glue *glue = platform_get_drvdata(pdev); + const struct dsps_musb_wrapper *wrp = glue->wrp; + int i; /* delete the child platform device */ - dsps_delete_musb_pdev(glue); + for (i = 0; i < wrp->instances ; i++) + dsps_delete_musb_pdev(glue, i); /* disable usbss clocks */ pm_runtime_put(&pdev->dev); @@ -665,6 +719,7 @@ static const struct dsps_musb_wrapper ti81xx_driver_data __devinitconst = { .rxep_bitmap = (0xfffe << 16), .musb_core_offset = 0x400, .poll_seconds = 2, + .instances = 2, }; static const struct platform_device_id musb_dsps_id_table[] __devinitconst = { @@ -676,13 +731,14 @@ static const struct platform_device_id musb_dsps_id_table[] __devinitconst = { }; MODULE_DEVICE_TABLE(platform, musb_dsps_id_table); +#ifdef CONFIG_OF static const struct of_device_id musb_dsps_of_match[] __devinitconst = { - { .compatible = "musb-ti81xx", }, - { .compatible = "ti,ti81xx-musb", }, - { .compatible = "ti,am335x-musb", }, + { .compatible = "ti,musb-am33xx", + .data = (void *) &ti81xx_driver_data, }, { }, }; MODULE_DEVICE_TABLE(of, musb_dsps_of_match); +#endif static struct platform_driver dsps_usbss_driver = { .probe = dsps_probe, @@ -690,7 +746,7 @@ static struct platform_driver dsps_usbss_driver = { .driver = { .name = "musb-dsps", .pm = &dsps_pm_ops, - .of_match_table = musb_dsps_of_match, + .of_match_table = of_match_ptr(musb_dsps_of_match), }, .id_table = musb_dsps_id_table, }; diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index f7194cf65aba..d0b87e7b4abf 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -373,7 +373,7 @@ static void txstate(struct musb *musb, struct musb_request *req) request_size = min_t(size_t, request->length - request->actual, musb_ep->dma->max_len); - use_dma = (request->dma != DMA_ADDR_INVALID); + use_dma = (request->dma != DMA_ADDR_INVALID && request_size); /* MUSB_TXCSR_P_ISO is still set correctly */ @@ -644,8 +644,8 @@ static void rxstate(struct musb *musb, struct musb_request *req) struct usb_request *request = &req->request; struct musb_ep *musb_ep; void __iomem *epio = musb->endpoints[epnum].regs; - unsigned fifo_count = 0; - u16 len; + unsigned len = 0; + u16 fifo_count; u16 csr = musb_readw(epio, MUSB_RXCSR); struct musb_hw_ep *hw_ep = &musb->endpoints[epnum]; u8 use_mode_1; @@ -655,7 +655,7 @@ static void rxstate(struct musb *musb, struct musb_request *req) else musb_ep = &hw_ep->ep_out; - len = musb_ep->packet_sz; + fifo_count = musb_ep->packet_sz; /* Check if EP is disabled */ if (!musb_ep->desc) { @@ -704,15 +704,14 @@ static void rxstate(struct musb *musb, struct musb_request *req) } if (csr & MUSB_RXCSR_RXPKTRDY) { - len = musb_readw(epio, MUSB_RXCOUNT); + fifo_count = musb_readw(epio, MUSB_RXCOUNT); /* - * Enable Mode 1 on RX transfers only when short_not_ok flag - * is set. Currently short_not_ok flag is set only from - * file_storage and f_mass_storage drivers + * use mode 1 only if we expect data of at least ep packet_sz + * and have not yet received a short packet */ - - if (request->short_not_ok && len == musb_ep->packet_sz) + if ((request->length - request->actual >= musb_ep->packet_sz) && + (fifo_count >= musb_ep->packet_sz)) use_mode_1 = 1; else use_mode_1 = 0; @@ -723,31 +722,11 @@ static void rxstate(struct musb *musb, struct musb_request *req) struct dma_controller *c; struct dma_channel *channel; int use_dma = 0; + int transfer_size; c = musb->dma_controller; channel = musb_ep->dma; - /* We use DMA Req mode 0 in rx_csr, and DMA controller operates in - * mode 0 only. So we do not get endpoint interrupts due to DMA - * completion. We only get interrupts from DMA controller. - * - * We could operate in DMA mode 1 if we knew the size of the tranfer - * in advance. For mass storage class, request->length = what the host - * sends, so that'd work. But for pretty much everything else, - * request->length is routinely more than what the host sends. For - * most these gadgets, end of is signified either by a short packet, - * or filling the last byte of the buffer. (Sending extra data in - * that last pckate should trigger an overflow fault.) But in mode 1, - * we don't get DMA completion interrupt for short packets. - * - * Theoretically, we could enable DMAReq irq (MUSB_RXCSR_DMAMODE = 1), - * to get endpoint interrupt on every DMA req, but that didn't seem - * to work reliably. - * - * REVISIT an updated g_file_storage can set req->short_not_ok, which - * then becomes usable as a runtime "use mode 1" hint... - */ - /* Experimental: Mode1 works with mass storage use cases */ if (use_mode_1) { csr |= MUSB_RXCSR_AUTOCLEAR; @@ -764,35 +743,30 @@ static void rxstate(struct musb *musb, struct musb_request *req) csr | MUSB_RXCSR_DMAMODE); musb_writew(epio, MUSB_RXCSR, csr); + transfer_size = min(request->length - request->actual, + channel->max_len); + musb_ep->dma->desired_mode = 1; + } else { if (!musb_ep->hb_mult && musb_ep->hw_ep->rx_double_buffered) csr |= MUSB_RXCSR_AUTOCLEAR; csr |= MUSB_RXCSR_DMAENAB; musb_writew(epio, MUSB_RXCSR, csr); - } - if (request->actual < request->length) { - int transfer_size = 0; - if (use_mode_1) { - transfer_size = min(request->length - request->actual, - channel->max_len); - musb_ep->dma->desired_mode = 1; - } else { - transfer_size = min(request->length - request->actual, - (unsigned)len); - musb_ep->dma->desired_mode = 0; - } - - use_dma = c->channel_program( - channel, - musb_ep->packet_sz, - channel->desired_mode, - request->dma - + request->actual, - transfer_size); + transfer_size = min(request->length - request->actual, + (unsigned)fifo_count); + musb_ep->dma->desired_mode = 0; } + use_dma = c->channel_program( + channel, + musb_ep->packet_sz, + channel->desired_mode, + request->dma + + request->actual, + transfer_size); + if (use_dma) return; } @@ -808,8 +782,8 @@ static void rxstate(struct musb *musb, struct musb_request *req) channel = musb_ep->dma; /* In case first packet is short */ - if (len < musb_ep->packet_sz) - transfer_size = len; + if (fifo_count < musb_ep->packet_sz) + transfer_size = fifo_count; else if (request->short_not_ok) transfer_size = min(request->length - request->actual, @@ -817,7 +791,7 @@ static void rxstate(struct musb *musb, struct musb_request *req) else transfer_size = min(request->length - request->actual, - (unsigned)len); + (unsigned)fifo_count); csr &= ~MUSB_RXCSR_DMAMODE; csr |= (MUSB_RXCSR_DMAENAB | @@ -845,10 +819,10 @@ static void rxstate(struct musb *musb, struct musb_request *req) } #endif /* Mentor's DMA */ - fifo_count = request->length - request->actual; + len = request->length - request->actual; dev_dbg(musb->controller, "%s OUT/RX pio fifo %d/%d, maxpacket %d\n", musb_ep->end_point.name, - len, fifo_count, + fifo_count, len, musb_ep->packet_sz); fifo_count = min_t(unsigned, len, fifo_count); @@ -901,7 +875,8 @@ static void rxstate(struct musb *musb, struct musb_request *req) } /* reach the end or short packet detected */ - if (request->actual == request->length || len < musb_ep->packet_sz) + if (request->actual == request->length || + fifo_count < musb_ep->packet_sz) musb_g_giveback(musb_ep, request, 0); } @@ -1885,8 +1860,7 @@ int __devinit musb_gadget_setup(struct musb *musb) musb->g.dev.release = musb_gadget_release; musb->g.name = musb_driver_name; - if (is_otg_enabled(musb)) - musb->g.is_otg = 1; + musb->g.is_otg = 1; musb_g_init_endpoints(musb); @@ -1932,11 +1906,14 @@ static int musb_gadget_start(struct usb_gadget *g, { struct musb *musb = gadget_to_musb(g); struct usb_otg *otg = musb->xceiv->otg; + struct usb_hcd *hcd = musb_to_hcd(musb); unsigned long flags; - int retval = -EINVAL; + int retval = 0; - if (driver->max_speed < USB_SPEED_HIGH) - goto err0; + if (driver->max_speed < USB_SPEED_HIGH) { + retval = -EINVAL; + goto err; + } pm_runtime_get_sync(musb->controller); @@ -1950,49 +1927,30 @@ static int musb_gadget_start(struct usb_gadget *g, otg_set_peripheral(otg, &musb->g); musb->xceiv->state = OTG_STATE_B_IDLE; - - /* - * FIXME this ignores the softconnect flag. Drivers are - * allowed hold the peripheral inactive until for example - * userspace hooks up printer hardware or DSP codecs, so - * hosts only see fully functional devices. - */ - - if (!is_otg_enabled(musb)) - musb_start(musb); - spin_unlock_irqrestore(&musb->lock, flags); - if (is_otg_enabled(musb)) { - struct usb_hcd *hcd = musb_to_hcd(musb); - - dev_dbg(musb->controller, "OTG startup...\n"); + /* REVISIT: funcall to other code, which also + * handles power budgeting ... this way also + * ensures HdrcStart is indirectly called. + */ + retval = usb_add_hcd(hcd, 0, 0); + if (retval < 0) { + dev_dbg(musb->controller, "add_hcd failed, %d\n", retval); + goto err; + } - /* REVISIT: funcall to other code, which also - * handles power budgeting ... this way also - * ensures HdrcStart is indirectly called. - */ - retval = usb_add_hcd(musb_to_hcd(musb), 0, 0); - if (retval < 0) { - dev_dbg(musb->controller, "add_hcd failed, %d\n", retval); - goto err2; - } + if ((musb->xceiv->last_event == USB_EVENT_ID) + && otg->set_vbus) + otg_set_vbus(otg, 1); - if ((musb->xceiv->last_event == USB_EVENT_ID) - && otg->set_vbus) - otg_set_vbus(otg, 1); + hcd->self.uses_pio_for_control = 1; - hcd->self.uses_pio_for_control = 1; - } if (musb->xceiv->last_event == USB_EVENT_NONE) pm_runtime_put(musb->controller); return 0; -err2: - if (!is_otg_enabled(musb)) - musb_stop(musb); -err0: +err: return retval; } @@ -2070,16 +2028,12 @@ static int musb_gadget_stop(struct usb_gadget *g, musb_platform_try_idle(musb, 0); spin_unlock_irqrestore(&musb->lock, flags); - if (is_otg_enabled(musb)) { - usb_remove_hcd(musb_to_hcd(musb)); - /* FIXME we need to be able to register another - * gadget driver here and have everything work; - * that currently misbehaves. - */ - } - - if (!is_otg_enabled(musb)) - musb_stop(musb); + usb_remove_hcd(musb_to_hcd(musb)); + /* + * FIXME we need to be able to register another + * gadget driver here and have everything work; + * that currently misbehaves. + */ pm_runtime_put(musb->controller); @@ -2241,13 +2195,11 @@ __acquires(musb->lock) if (devctl & MUSB_DEVCTL_BDEVICE) { musb->xceiv->state = OTG_STATE_B_PERIPHERAL; musb->g.is_a_peripheral = 0; - } else if (is_otg_enabled(musb)) { + } else { musb->xceiv->state = OTG_STATE_A_PERIPHERAL; musb->g.is_a_peripheral = 1; - } else - WARN_ON(1); + } /* start with default limits on VBUS power draw */ - (void) musb_gadget_vbus_draw(&musb->g, - is_otg_enabled(musb) ? 8 : 100); + (void) musb_gadget_vbus_draw(&musb->g, 8); } diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 1ae378d5fc6f..3df6a76b851d 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -693,6 +693,8 @@ static void musb_ep_program(struct musb *musb, u8 epnum, void __iomem *epio = hw_ep->regs; struct musb_qh *qh = musb_ep_get_qh(hw_ep, !is_out); u16 packet_sz = qh->maxpacket; + u8 use_dma = 1; + u16 csr; dev_dbg(musb->controller, "%s hw%d urb %p spd%d dev%d ep%d%s " "h_addr%02x h_port%02x bytes %d\n", @@ -704,9 +706,17 @@ static void musb_ep_program(struct musb *musb, u8 epnum, musb_ep_select(mbase, epnum); + if (is_out && !len) { + use_dma = 0; + csr = musb_readw(epio, MUSB_TXCSR); + csr &= ~MUSB_TXCSR_DMAENAB; + musb_writew(epio, MUSB_TXCSR, csr); + hw_ep->tx_channel = NULL; + } + /* candidate for DMA? */ dma_controller = musb->dma_controller; - if (is_dma_capable() && epnum && dma_controller) { + if (use_dma && is_dma_capable() && epnum && dma_controller) { dma_channel = is_out ? hw_ep->tx_channel : hw_ep->rx_channel; if (!dma_channel) { dma_channel = dma_controller->channel_alloc( @@ -813,9 +823,28 @@ static void musb_ep_program(struct musb *musb, u8 epnum, if (load_count) { /* PIO to load FIFO */ qh->segsize = load_count; - musb_write_fifo(hw_ep, load_count, buf); + if (!buf) { + sg_miter_start(&qh->sg_miter, urb->sg, 1, + SG_MITER_ATOMIC + | SG_MITER_FROM_SG); + if (!sg_miter_next(&qh->sg_miter)) { + dev_err(musb->controller, + "error: sg" + "list empty\n"); + sg_miter_stop(&qh->sg_miter); + goto finish; + } + buf = qh->sg_miter.addr + urb->sg->offset + + urb->actual_length; + load_count = min_t(u32, load_count, + qh->sg_miter.length); + musb_write_fifo(hw_ep, load_count, buf); + qh->sg_miter.consumed = load_count; + sg_miter_stop(&qh->sg_miter); + } else + musb_write_fifo(hw_ep, load_count, buf); } - +finish: /* re-enable interrupt */ musb_writew(mbase, MUSB_INTRTXE, int_txe); @@ -882,6 +911,73 @@ static void musb_ep_program(struct musb *musb, u8 epnum, } } +/* Schedule next QH from musb->in_bulk/out_bulk and move the current qh to + * the end; avoids starvation for other endpoints. + */ +static void musb_bulk_nak_timeout(struct musb *musb, struct musb_hw_ep *ep, + int is_in) +{ + struct dma_channel *dma; + struct urb *urb; + void __iomem *mbase = musb->mregs; + void __iomem *epio = ep->regs; + struct musb_qh *cur_qh, *next_qh; + u16 rx_csr, tx_csr; + + musb_ep_select(mbase, ep->epnum); + if (is_in) { + dma = is_dma_capable() ? ep->rx_channel : NULL; + + /* clear nak timeout bit */ + rx_csr = musb_readw(epio, MUSB_RXCSR); + rx_csr |= MUSB_RXCSR_H_WZC_BITS; + rx_csr &= ~MUSB_RXCSR_DATAERROR; + musb_writew(epio, MUSB_RXCSR, rx_csr); + + cur_qh = first_qh(&musb->in_bulk); + } else { + dma = is_dma_capable() ? ep->tx_channel : NULL; + + /* clear nak timeout bit */ + tx_csr = musb_readw(epio, MUSB_TXCSR); + tx_csr |= MUSB_TXCSR_H_WZC_BITS; + tx_csr &= ~MUSB_TXCSR_H_NAKTIMEOUT; + musb_writew(epio, MUSB_TXCSR, tx_csr); + + cur_qh = first_qh(&musb->out_bulk); + } + if (cur_qh) { + urb = next_urb(cur_qh); + if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) { + dma->status = MUSB_DMA_STATUS_CORE_ABORT; + musb->dma_controller->channel_abort(dma); + urb->actual_length += dma->actual_len; + dma->actual_len = 0L; + } + musb_save_toggle(cur_qh, is_in, urb); + + if (is_in) { + /* move cur_qh to end of queue */ + list_move_tail(&cur_qh->ring, &musb->in_bulk); + + /* get the next qh from musb->in_bulk */ + next_qh = first_qh(&musb->in_bulk); + + /* set rx_reinit and schedule the next qh */ + ep->rx_reinit = 1; + } else { + /* move cur_qh to end of queue */ + list_move_tail(&cur_qh->ring, &musb->out_bulk); + + /* get the next qh from musb->out_bulk */ + next_qh = first_qh(&musb->out_bulk); + + /* set tx_reinit and schedule the next qh */ + ep->tx_reinit = 1; + } + musb_start_urb(musb, is_in, next_qh); + } +} /* * Service the default endpoint (ep0) as host. @@ -1116,6 +1212,7 @@ void musb_host_tx(struct musb *musb, u8 epnum) void __iomem *mbase = musb->mregs; struct dma_channel *dma; bool transfer_pending = false; + static bool use_sg; musb_ep_select(mbase, epnum); tx_csr = musb_readw(epio, MUSB_TXCSR); @@ -1146,23 +1243,31 @@ void musb_host_tx(struct musb *musb, u8 epnum) status = -ETIMEDOUT; } else if (tx_csr & MUSB_TXCSR_H_NAKTIMEOUT) { - dev_dbg(musb->controller, "TX end=%d device not responding\n", epnum); - - /* NOTE: this code path would be a good place to PAUSE a - * transfer, if there's some other (nonperiodic) tx urb - * that could use this fifo. (dma complicates it...) - * That's already done for bulk RX transfers. - * - * if (bulk && qh->ring.next != &musb->out_bulk), then - * we have a candidate... NAKing is *NOT* an error - */ - musb_ep_select(mbase, epnum); - musb_writew(epio, MUSB_TXCSR, - MUSB_TXCSR_H_WZC_BITS - | MUSB_TXCSR_TXPKTRDY); - return; + if (USB_ENDPOINT_XFER_BULK == qh->type && qh->mux == 1 + && !list_is_singular(&musb->out_bulk)) { + dev_dbg(musb->controller, + "NAK timeout on TX%d ep\n", epnum); + musb_bulk_nak_timeout(musb, hw_ep, 0); + } else { + dev_dbg(musb->controller, + "TX end=%d device not responding\n", epnum); + /* NOTE: this code path would be a good place to PAUSE a + * transfer, if there's some other (nonperiodic) tx urb + * that could use this fifo. (dma complicates it...) + * That's already done for bulk RX transfers. + * + * if (bulk && qh->ring.next != &musb->out_bulk), then + * we have a candidate... NAKing is *NOT* an error + */ + musb_ep_select(mbase, epnum); + musb_writew(epio, MUSB_TXCSR, + MUSB_TXCSR_H_WZC_BITS + | MUSB_TXCSR_TXPKTRDY); + } + return; } +done: if (status) { if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) { dma->status = MUSB_DMA_STATUS_CORE_ABORT; @@ -1332,9 +1437,38 @@ void musb_host_tx(struct musb *musb, u8 epnum) length = qh->maxpacket; /* Unmap the buffer so that CPU can use it */ usb_hcd_unmap_urb_for_dma(musb_to_hcd(musb), urb); - musb_write_fifo(hw_ep, length, urb->transfer_buffer + offset); + + /* + * We need to map sg if the transfer_buffer is + * NULL. + */ + if (!urb->transfer_buffer) + use_sg = true; + + if (use_sg) { + /* sg_miter_start is already done in musb_ep_program */ + if (!sg_miter_next(&qh->sg_miter)) { + dev_err(musb->controller, "error: sg list empty\n"); + sg_miter_stop(&qh->sg_miter); + status = -EINVAL; + goto done; + } + urb->transfer_buffer = qh->sg_miter.addr; + length = min_t(u32, length, qh->sg_miter.length); + musb_write_fifo(hw_ep, length, urb->transfer_buffer); + qh->sg_miter.consumed = length; + sg_miter_stop(&qh->sg_miter); + } else { + musb_write_fifo(hw_ep, length, urb->transfer_buffer + offset); + } + qh->segsize = length; + if (use_sg) { + if (offset + length >= urb->transfer_buffer_length) + use_sg = false; + } + musb_ep_select(mbase, epnum); musb_writew(epio, MUSB_TXCSR, MUSB_TXCSR_H_WZC_BITS | MUSB_TXCSR_TXPKTRDY); @@ -1380,50 +1514,6 @@ void musb_host_tx(struct musb *musb, u8 epnum) #endif -/* Schedule next QH from musb->in_bulk and move the current qh to - * the end; avoids starvation for other endpoints. - */ -static void musb_bulk_rx_nak_timeout(struct musb *musb, struct musb_hw_ep *ep) -{ - struct dma_channel *dma; - struct urb *urb; - void __iomem *mbase = musb->mregs; - void __iomem *epio = ep->regs; - struct musb_qh *cur_qh, *next_qh; - u16 rx_csr; - - musb_ep_select(mbase, ep->epnum); - dma = is_dma_capable() ? ep->rx_channel : NULL; - - /* clear nak timeout bit */ - rx_csr = musb_readw(epio, MUSB_RXCSR); - rx_csr |= MUSB_RXCSR_H_WZC_BITS; - rx_csr &= ~MUSB_RXCSR_DATAERROR; - musb_writew(epio, MUSB_RXCSR, rx_csr); - - cur_qh = first_qh(&musb->in_bulk); - if (cur_qh) { - urb = next_urb(cur_qh); - if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) { - dma->status = MUSB_DMA_STATUS_CORE_ABORT; - musb->dma_controller->channel_abort(dma); - urb->actual_length += dma->actual_len; - dma->actual_len = 0L; - } - musb_save_toggle(cur_qh, 1, urb); - - /* move cur_qh to end of queue */ - list_move_tail(&cur_qh->ring, &musb->in_bulk); - - /* get the next qh from musb->in_bulk */ - next_qh = first_qh(&musb->in_bulk); - - /* set rx_reinit and schedule the next qh */ - ep->rx_reinit = 1; - musb_start_urb(musb, 1, next_qh); - } -} - /* * Service an RX interrupt for the given IN endpoint; docs cover bulk, iso, * and high-bandwidth IN transfer cases. @@ -1442,6 +1532,8 @@ void musb_host_rx(struct musb *musb, u8 epnum) bool done = false; u32 status; struct dma_channel *dma; + static bool use_sg; + unsigned int sg_flags = SG_MITER_ATOMIC | SG_MITER_TO_SG; musb_ep_select(mbase, epnum); @@ -1500,7 +1592,7 @@ void musb_host_rx(struct musb *musb, u8 epnum) if (usb_pipebulk(urb->pipe) && qh->mux == 1 && !list_is_singular(&musb->in_bulk)) { - musb_bulk_rx_nak_timeout(musb, hw_ep); + musb_bulk_nak_timeout(musb, hw_ep, 1); return; } musb_ep_select(mbase, epnum); @@ -1756,10 +1848,43 @@ void musb_host_rx(struct musb *musb, u8 epnum) #endif /* Mentor DMA */ if (!dma) { + unsigned int received_len; + /* Unmap the buffer so that CPU can use it */ usb_hcd_unmap_urb_for_dma(musb_to_hcd(musb), urb); - done = musb_host_packet_rx(musb, urb, - epnum, iso_err); + + /* + * We need to map sg if the transfer_buffer is + * NULL. + */ + if (!urb->transfer_buffer) { + use_sg = true; + sg_miter_start(&qh->sg_miter, urb->sg, 1, + sg_flags); + } + + if (use_sg) { + if (!sg_miter_next(&qh->sg_miter)) { + dev_err(musb->controller, "error: sg list empty\n"); + sg_miter_stop(&qh->sg_miter); + status = -EINVAL; + done = true; + goto finish; + } + urb->transfer_buffer = qh->sg_miter.addr; + received_len = urb->actual_length; + qh->offset = 0x0; + done = musb_host_packet_rx(musb, urb, epnum, + iso_err); + /* Calculate the number of bytes received */ + received_len = urb->actual_length - + received_len; + qh->sg_miter.consumed = received_len; + sg_miter_stop(&qh->sg_miter); + } else { + done = musb_host_packet_rx(musb, urb, + epnum, iso_err); + } dev_dbg(musb->controller, "read %spacket\n", done ? "last " : ""); } } @@ -1768,6 +1893,9 @@ finish: urb->actual_length += xfer_len; qh->offset += xfer_len; if (done) { + if (use_sg) + use_sg = false; + if (urb->status == -EINPROGRESS) urb->status = status; musb_advance_schedule(musb, urb, hw_ep, USB_DIR_IN); @@ -1863,14 +1991,14 @@ static int musb_schedule( else head = &musb->out_bulk; - /* Enable bulk RX NAK timeout scheme when bulk requests are + /* Enable bulk RX/TX NAK timeout scheme when bulk requests are * multiplexed. This scheme doen't work in high speed to full * speed scenario as NAK interrupts are not coming from a * full speed device connected to a high speed device. * NAK timeout interval is 8 (128 uframe or 16ms) for HS and * 4 (8 frame or 8ms) for FS device. */ - if (is_in && qh->dev) + if (qh->dev) qh->intv_reg = (USB_SPEED_HIGH == qh->dev->speed) ? 8 : 4; goto success; diff --git a/drivers/usb/musb/musb_host.h b/drivers/usb/musb/musb_host.h index 622d09fb9aba..5a9c8feec10c 100644 --- a/drivers/usb/musb/musb_host.h +++ b/drivers/usb/musb/musb_host.h @@ -35,6 +35,8 @@ #ifndef _MUSB_HOST_H #define _MUSB_HOST_H +#include <linux/scatterlist.h> + static inline struct usb_hcd *musb_to_hcd(struct musb *musb) { return container_of((void *) musb, struct usb_hcd, hcd_priv); @@ -71,6 +73,7 @@ struct musb_qh { u16 maxpacket; u16 frame; /* for periodic schedule */ unsigned iso_idx; /* in urb->iso_frame_desc[] */ + struct sg_mapping_iter sg_miter; /* for highmem in PIO mode */ }; /* map from control or bulk queue head to the first qh on that ring */ diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c index 22ec3e379980..f70579154ded 100644 --- a/drivers/usb/musb/musb_virthub.c +++ b/drivers/usb/musb/musb_virthub.c @@ -81,8 +81,7 @@ static void musb_port_suspend(struct musb *musb, bool do_suspend) switch (musb->xceiv->state) { case OTG_STATE_A_HOST: musb->xceiv->state = OTG_STATE_A_SUSPEND; - musb->is_active = is_otg_enabled(musb) - && otg->host->b_hnp_enable; + musb->is_active = otg->host->b_hnp_enable; if (musb->is_active) mod_timer(&musb->otg_timer, jiffies + msecs_to_jiffies( @@ -91,8 +90,7 @@ static void musb_port_suspend(struct musb *musb, bool do_suspend) break; case OTG_STATE_B_HOST: musb->xceiv->state = OTG_STATE_B_WAIT_ACON; - musb->is_active = is_otg_enabled(musb) - && otg->host->b_hnp_enable; + musb->is_active = otg->host->b_hnp_enable; musb_platform_try_idle(musb, 0); break; default: @@ -190,8 +188,7 @@ void musb_root_disconnect(struct musb *musb) switch (musb->xceiv->state) { case OTG_STATE_A_SUSPEND: - if (is_otg_enabled(musb) - && otg->host->b_hnp_enable) { + if (otg->host->b_hnp_enable) { musb->xceiv->state = OTG_STATE_A_PERIPHERAL; musb->g.is_a_peripheral = 1; break; @@ -273,7 +270,7 @@ int musb_hub_control( musb_port_suspend(musb, false); break; case USB_PORT_FEAT_POWER: - if (!(is_otg_enabled(musb) && hcd->self.is_b_host)) + if (!hcd->self.is_b_host) musb_platform_set_vbus(musb, 0); break; case USB_PORT_FEAT_C_CONNECTION: @@ -369,7 +366,7 @@ int musb_hub_control( * initialization logic, e.g. for OTG, or change any * logic relating to VBUS power-up. */ - if (!(is_otg_enabled(musb) && hcd->self.is_b_host)) + if (!hcd->self.is_b_host) musb_start(musb); break; case USB_PORT_FEAT_RESET: diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c index c1be687e00ec..0fc6ca6bc60a 100644 --- a/drivers/usb/musb/musbhsdma.c +++ b/drivers/usb/musb/musbhsdma.c @@ -380,7 +380,7 @@ void dma_controller_destroy(struct dma_controller *c) kfree(controller); } -struct dma_controller *__init +struct dma_controller *__devinit dma_controller_create(struct musb *musb, void __iomem *base) { struct musb_dma_controller *controller; diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index 5fdb9da8dd56..a538fe17a966 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -30,10 +30,12 @@ #include <linux/init.h> #include <linux/list.h> #include <linux/io.h> +#include <linux/of.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <linux/pm_runtime.h> #include <linux/err.h> +#include <linux/delay.h> #include <linux/usb/musb-omap.h> #include "musb_core.h" @@ -44,6 +46,7 @@ struct omap2430_glue { struct platform_device *musb; enum omap_musb_vbus_id_status status; struct work_struct omap_musb_mailbox_work; + u32 __iomem *control_otghs; }; #define glue_to_musb(g) platform_get_drvdata(g->musb) @@ -51,6 +54,26 @@ struct omap2430_glue *_glue; static struct timer_list musb_idle_timer; +/** + * omap4_usb_phy_mailbox - write to usb otg mailbox + * @glue: struct omap2430_glue * + * @val: the value to be written to the mailbox + * + * On detection of a device (ID pin is grounded), this API should be called + * to set AVALID, VBUSVALID and ID pin is grounded. + * + * When OMAP is connected to a host (OMAP in device mode), this API + * is called to set AVALID, VBUSVALID and ID pin in high impedance. + * + * XXX: This function will be removed once we have a seperate driver for + * control module + */ +static void omap4_usb_phy_mailbox(struct omap2430_glue *glue, u32 val) +{ + if (glue->control_otghs) + writel(val, glue->control_otghs); +} + static void musb_do_idle(unsigned long _musb) { struct musb *musb = (void *)_musb; @@ -140,7 +163,6 @@ static void omap2430_musb_set_vbus(struct musb *musb, int is_on) struct usb_otg *otg = musb->xceiv->otg; u8 devctl; unsigned long timeout = jiffies + msecs_to_jiffies(1000); - int ret = 1; /* HDRC controls CPEN, but beware current surges during device * connect. They can trigger transient overcurrent conditions * that must be ignored. @@ -150,6 +172,7 @@ static void omap2430_musb_set_vbus(struct musb *musb, int is_on) if (is_on) { if (musb->xceiv->state == OTG_STATE_A_IDLE) { + int loops = 100; /* start the session */ devctl |= MUSB_DEVCTL_SESSION; musb_writeb(musb->mregs, MUSB_DEVCTL, devctl); @@ -159,17 +182,18 @@ static void omap2430_musb_set_vbus(struct musb *musb, int is_on) */ while (musb_readb(musb->mregs, MUSB_DEVCTL) & 0x80) { + mdelay(5); cpu_relax(); - if (time_after(jiffies, timeout)) { + if (time_after(jiffies, timeout) + || loops-- <= 0) { dev_err(musb->controller, "configured as A device timeout"); - ret = -EINVAL; break; } } - if (ret && otg->set_vbus) + if (otg->set_vbus) otg_set_vbus(otg, 1); } else { musb->is_active = 1; @@ -245,6 +269,7 @@ EXPORT_SYMBOL_GPL(omap_musb_mailbox); static void omap_musb_set_mailbox(struct omap2430_glue *glue) { + u32 val; struct musb *musb = glue_to_musb(glue); struct device *dev = musb->controller; struct musb_hdrc_platform_data *pdata = dev->platform_data; @@ -258,9 +283,10 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue) otg->default_a = true; musb->xceiv->state = OTG_STATE_A_IDLE; musb->xceiv->last_event = USB_EVENT_ID; - if (!is_otg_enabled(musb) || musb->gadget_driver) { + if (musb->gadget_driver) { pm_runtime_get_sync(dev); - usb_phy_init(musb->xceiv); + val = AVALID | VBUSVALID; + omap4_usb_phy_mailbox(glue, val); omap2430_musb_set_vbus(musb, 1); } break; @@ -273,7 +299,8 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue) musb->xceiv->last_event = USB_EVENT_VBUS; if (musb->gadget_driver) pm_runtime_get_sync(dev); - usb_phy_init(musb->xceiv); + val = IDDIG | AVALID | VBUSVALID; + omap4_usb_phy_mailbox(glue, val); break; case OMAP_MUSB_ID_FLOAT: @@ -281,17 +308,17 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue) dev_dbg(dev, "VBUS Disconnect\n"); musb->xceiv->last_event = USB_EVENT_NONE; - if (is_otg_enabled(musb) || is_peripheral_enabled(musb)) - if (musb->gadget_driver) { - pm_runtime_mark_last_busy(dev); - pm_runtime_put_autosuspend(dev); - } + if (musb->gadget_driver) { + pm_runtime_mark_last_busy(dev); + pm_runtime_put_autosuspend(dev); + } if (data->interface_type == MUSB_INTERFACE_UTMI) { if (musb->xceiv->otg->set_vbus) otg_set_vbus(musb->xceiv->otg, 0); } - usb_phy_shutdown(musb->xceiv); + val = SESSEND | IDDIG; + omap4_usb_phy_mailbox(glue, val); break; default: dev_dbg(dev, "ID float\n"); @@ -366,6 +393,7 @@ err1: static void omap2430_musb_enable(struct musb *musb) { u8 devctl; + u32 val; unsigned long timeout = jiffies + msecs_to_jiffies(1000); struct device *dev = musb->controller; struct omap2430_glue *glue = dev_get_drvdata(dev->parent); @@ -375,7 +403,8 @@ static void omap2430_musb_enable(struct musb *musb) switch (glue->status) { case OMAP_MUSB_ID_GROUND: - usb_phy_init(musb->xceiv); + val = AVALID | VBUSVALID; + omap4_usb_phy_mailbox(glue, val); if (data->interface_type != MUSB_INTERFACE_UTMI) break; devctl = musb_readb(musb->mregs, MUSB_DEVCTL); @@ -394,7 +423,8 @@ static void omap2430_musb_enable(struct musb *musb) break; case OMAP_MUSB_VBUS_VALID: - usb_phy_init(musb->xceiv); + val = IDDIG | AVALID | VBUSVALID; + omap4_usb_phy_mailbox(glue, val); break; default: @@ -404,11 +434,14 @@ static void omap2430_musb_enable(struct musb *musb) static void omap2430_musb_disable(struct musb *musb) { + u32 val; struct device *dev = musb->controller; struct omap2430_glue *glue = dev_get_drvdata(dev->parent); - if (glue->status != OMAP_MUSB_UNKNOWN) - usb_phy_shutdown(musb->xceiv); + if (glue->status != OMAP_MUSB_UNKNOWN) { + val = SESSEND | IDDIG; + omap4_usb_phy_mailbox(glue, val); + } } static int omap2430_musb_exit(struct musb *musb) @@ -438,9 +471,14 @@ static u64 omap2430_dmamask = DMA_BIT_MASK(32); static int __devinit omap2430_probe(struct platform_device *pdev) { struct musb_hdrc_platform_data *pdata = pdev->dev.platform_data; + struct omap_musb_board_data *data; struct platform_device *musb; struct omap2430_glue *glue; + struct device_node *np = pdev->dev.of_node; + struct musb_hdrc_config *config; + struct resource *res; int ret = -ENOMEM; + int musbid; glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL); if (!glue) { @@ -448,12 +486,21 @@ static int __devinit omap2430_probe(struct platform_device *pdev) goto err0; } - musb = platform_device_alloc("musb-hdrc", -1); + /* get the musb id */ + musbid = musb_get_id(&pdev->dev, GFP_KERNEL); + if (musbid < 0) { + dev_err(&pdev->dev, "failed to allocate musb id\n"); + ret = -ENOMEM; + goto err0; + } + + musb = platform_device_alloc("musb-hdrc", musbid); if (!musb) { dev_err(&pdev->dev, "failed to allocate musb device\n"); - goto err0; + goto err1; } + musb->id = musbid; musb->dev.parent = &pdev->dev; musb->dev.dma_mask = &omap2430_dmamask; musb->dev.coherent_dma_mask = omap2430_dmamask; @@ -462,6 +509,48 @@ static int __devinit omap2430_probe(struct platform_device *pdev) glue->musb = musb; glue->status = OMAP_MUSB_UNKNOWN; + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + + glue->control_otghs = devm_request_and_ioremap(&pdev->dev, res); + if (glue->control_otghs == NULL) + dev_dbg(&pdev->dev, "Failed to obtain control memory\n"); + + if (np) { + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) { + dev_err(&pdev->dev, + "failed to allocate musb platfrom data\n"); + ret = -ENOMEM; + goto err1; + } + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) { + dev_err(&pdev->dev, + "failed to allocate musb board data\n"); + ret = -ENOMEM; + goto err1; + } + + config = devm_kzalloc(&pdev->dev, sizeof(*config), GFP_KERNEL); + if (!data) { + dev_err(&pdev->dev, + "failed to allocate musb hdrc config\n"); + goto err1; + } + + of_property_read_u32(np, "mode", (u32 *)&pdata->mode); + of_property_read_u32(np, "interface_type", + (u32 *)&data->interface_type); + of_property_read_u32(np, "num_eps", (u32 *)&config->num_eps); + of_property_read_u32(np, "ram_bits", (u32 *)&config->ram_bits); + of_property_read_u32(np, "power", (u32 *)&pdata->power); + config->multipoint = of_property_read_bool(np, "multipoint"); + + pdata->board_data = data; + pdata->config = config; + } + pdata->platform_ops = &omap2430_ops; platform_set_drvdata(pdev, glue); @@ -478,13 +567,13 @@ static int __devinit omap2430_probe(struct platform_device *pdev) pdev->num_resources); if (ret) { dev_err(&pdev->dev, "failed to add resources\n"); - goto err1; + goto err2; } ret = platform_device_add_data(musb, pdata, sizeof(*pdata)); if (ret) { dev_err(&pdev->dev, "failed to add platform_data\n"); - goto err1; + goto err2; } pm_runtime_enable(&pdev->dev); @@ -492,14 +581,17 @@ static int __devinit omap2430_probe(struct platform_device *pdev) ret = platform_device_add(musb); if (ret) { dev_err(&pdev->dev, "failed to register musb device\n"); - goto err1; + goto err2; } return 0; -err1: +err2: platform_device_put(musb); +err1: + musb_put_id(&pdev->dev, musbid); + err0: return ret; } @@ -509,8 +601,8 @@ static int __devexit omap2430_remove(struct platform_device *pdev) struct omap2430_glue *glue = platform_get_drvdata(pdev); cancel_work_sync(&glue->omap_musb_mailbox_work); - platform_device_del(glue->musb); - platform_device_put(glue->musb); + musb_put_id(&pdev->dev, glue->musb->id); + platform_device_unregister(glue->musb); return 0; } @@ -559,12 +651,26 @@ static struct dev_pm_ops omap2430_pm_ops = { #define DEV_PM_OPS NULL #endif +#ifdef CONFIG_OF +static const struct of_device_id omap2430_id_table[] = { + { + .compatible = "ti,omap4-musb" + }, + { + .compatible = "ti,omap3-musb" + }, + {}, +}; +MODULE_DEVICE_TABLE(of, omap2430_id_table); +#endif + static struct platform_driver omap2430_driver = { .probe = omap2430_probe, .remove = __devexit_p(omap2430_remove), .driver = { .name = "musb-omap2430", .pm = DEV_PM_OPS, + .of_match_table = of_match_ptr(omap2430_id_table), }, }; diff --git a/drivers/usb/musb/omap2430.h b/drivers/usb/musb/omap2430.h index 40b3c02ae9f0..b85f3973e78c 100644 --- a/drivers/usb/musb/omap2430.h +++ b/drivers/usb/musb/omap2430.h @@ -49,4 +49,13 @@ #define OTG_FORCESTDBY 0x414 # define ENABLEFORCE (1 << 0) +/* + * Control Module bit definitions + * XXX: Will be removed once we have a driver for control module. + */ +#define AVALID BIT(0) +#define BVALID BIT(1) +#define VBUSVALID BIT(2) +#define SESSEND BIT(3) +#define IDDIG BIT(4) #endif /* __MUSB_OMAP243X_H__ */ diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c index 341625442377..dc4d75ea13ad 100644 --- a/drivers/usb/musb/tusb6010.c +++ b/drivers/usb/musb/tusb6010.c @@ -24,6 +24,7 @@ #include <linux/irq.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> +#include <linux/usb/nop-usb-xceiv.h> #include "musb_core.h" @@ -153,7 +154,7 @@ tusb_fifo_write_unaligned(void __iomem *fifo, const u8 *buf, u16 len) } static inline void tusb_fifo_read_unaligned(void __iomem *fifo, - void __iomem *buf, u16 len) + void *buf, u16 len) { u32 val; int i; @@ -437,14 +438,13 @@ static void musb_do_idle(unsigned long _musb) if (is_host_active(musb) && (musb->port1_status >> 16)) goto done; - if (is_peripheral_enabled(musb) && !musb->gadget_driver) { + if (!musb->gadget_driver) { wakeups = 0; } else { wakeups = TUSB_PRCM_WHOSTDISCON | TUSB_PRCM_WBUS | TUSB_PRCM_WVBUS; - if (is_otg_enabled(musb)) - wakeups |= TUSB_PRCM_WID; + wakeups |= TUSB_PRCM_WID; } tusb_allow_idle(musb, wakeups); } @@ -582,21 +582,12 @@ static void tusb_musb_set_vbus(struct musb *musb, int is_on) * * Note that if a mini-A cable is plugged in the ID line will stay down as * the weak ID pull-up is not able to pull the ID up. - * - * REVISIT: It would be possible to add support for changing between host - * and peripheral modes in non-OTG configurations by reconfiguring hardware - * and then setting musb->board_mode. For now, only support OTG mode. */ static int tusb_musb_set_mode(struct musb *musb, u8 musb_mode) { void __iomem *tbase = musb->ctrl_base; u32 otg_stat, phy_otg_ctrl, phy_otg_ena, dev_conf; - if (musb->board_mode != MUSB_OTG) { - ERR("Changing mode currently only supported in OTG mode\n"); - return -EINVAL; - } - otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT); phy_otg_ctrl = musb_readl(tbase, TUSB_PHY_OTG_CTRL); phy_otg_ena = musb_readl(tbase, TUSB_PHY_OTG_CTRL_ENABLE); @@ -652,10 +643,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase) if ((int_src & TUSB_INT_SRC_ID_STATUS_CHNG)) { int default_a; - if (is_otg_enabled(musb)) - default_a = !(otg_stat & TUSB_DEV_OTG_STAT_ID_STATUS); - else - default_a = is_host_enabled(musb); + default_a = !(otg_stat & TUSB_DEV_OTG_STAT_ID_STATUS); dev_dbg(musb->controller, "Default-%c\n", default_a ? 'A' : 'B'); otg->default_a = default_a; tusb_musb_set_vbus(musb, default_a); @@ -669,8 +657,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase) if (int_src & TUSB_INT_SRC_VBUS_SENSE_CHNG) { /* B-dev state machine: no vbus ~= disconnect */ - if ((is_otg_enabled(musb) && !otg->default_a) - || !is_host_enabled(musb)) { + if (!otg->default_a) { /* ? musb_root_disconnect(musb); */ musb->port1_status &= ~(USB_PORT_STAT_CONNECTION @@ -1119,10 +1106,8 @@ static int tusb_musb_init(struct musb *musb) } musb->isr = tusb_musb_interrupt; - if (is_peripheral_enabled(musb)) { - musb->xceiv->set_power = tusb_draw_power; - the_musb = musb; - } + musb->xceiv->set_power = tusb_draw_power; + the_musb = musb; setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb); @@ -1175,6 +1160,7 @@ static int __devinit tusb_probe(struct platform_device *pdev) struct tusb6010_glue *glue; int ret = -ENOMEM; + int musbid; glue = kzalloc(sizeof(*glue), GFP_KERNEL); if (!glue) { @@ -1182,12 +1168,21 @@ static int __devinit tusb_probe(struct platform_device *pdev) goto err0; } - musb = platform_device_alloc("musb-hdrc", -1); + /* get the musb id */ + musbid = musb_get_id(&pdev->dev, GFP_KERNEL); + if (musbid < 0) { + dev_err(&pdev->dev, "failed to allocate musb id\n"); + ret = -ENOMEM; + goto err1; + } + + musb = platform_device_alloc("musb-hdrc", musbid); if (!musb) { dev_err(&pdev->dev, "failed to allocate musb device\n"); - goto err1; + goto err2; } + musb->id = musbid; musb->dev.parent = &pdev->dev; musb->dev.dma_mask = &tusb_dmamask; musb->dev.coherent_dma_mask = tusb_dmamask; @@ -1203,26 +1198,29 @@ static int __devinit tusb_probe(struct platform_device *pdev) pdev->num_resources); if (ret) { dev_err(&pdev->dev, "failed to add resources\n"); - goto err2; + goto err3; } ret = platform_device_add_data(musb, pdata, sizeof(*pdata)); if (ret) { dev_err(&pdev->dev, "failed to add platform_data\n"); - goto err2; + goto err3; } ret = platform_device_add(musb); if (ret) { dev_err(&pdev->dev, "failed to register musb device\n"); - goto err2; + goto err3; } return 0; -err2: +err3: platform_device_put(musb); +err2: + musb_put_id(&pdev->dev, musbid); + err1: kfree(glue); @@ -1234,6 +1232,7 @@ static int __devexit tusb_remove(struct platform_device *pdev) { struct tusb6010_glue *glue = platform_get_drvdata(pdev); + musb_put_id(&pdev->dev, glue->musb->id); platform_device_del(glue->musb); platform_device_put(glue->musb); kfree(glue); diff --git a/drivers/usb/musb/tusb6010_omap.c b/drivers/usb/musb/tusb6010_omap.c index b67b4bc596c1..53e25968ed0c 100644 --- a/drivers/usb/musb/tusb6010_omap.c +++ b/drivers/usb/musb/tusb6010_omap.c @@ -662,7 +662,7 @@ void dma_controller_destroy(struct dma_controller *c) kfree(tusb_dma); } -struct dma_controller *__init +struct dma_controller *__devinit dma_controller_create(struct musb *musb, void __iomem *base) { void __iomem *tbase = musb->ctrl_base; diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c index a8c0fadce1b0..d62a91fedc22 100644 --- a/drivers/usb/musb/ux500.c +++ b/drivers/usb/musb/ux500.c @@ -74,25 +74,34 @@ static int __devinit ux500_probe(struct platform_device *pdev) goto err0; } - musb = platform_device_alloc("musb-hdrc", -1); + /* get the musb id */ + musbid = musb_get_id(&pdev->dev, GFP_KERNEL); + if (musbid < 0) { + dev_err(&pdev->dev, "failed to allocate musb id\n"); + ret = -ENOMEM; + goto err1; + } + + musb = platform_device_alloc("musb-hdrc", musbid); if (!musb) { dev_err(&pdev->dev, "failed to allocate musb device\n"); - goto err1; + goto err2; } clk = clk_get(&pdev->dev, "usb"); if (IS_ERR(clk)) { dev_err(&pdev->dev, "failed to get clock\n"); ret = PTR_ERR(clk); - goto err2; + goto err3; } ret = clk_enable(clk); if (ret) { dev_err(&pdev->dev, "failed to enable clock\n"); - goto err3; + goto err4; } + musb->id = musbid; musb->dev.parent = &pdev->dev; musb->dev.dma_mask = pdev->dev.dma_mask; musb->dev.coherent_dma_mask = pdev->dev.coherent_dma_mask; @@ -109,32 +118,35 @@ static int __devinit ux500_probe(struct platform_device *pdev) pdev->num_resources); if (ret) { dev_err(&pdev->dev, "failed to add resources\n"); - goto err4; + goto err5; } ret = platform_device_add_data(musb, pdata, sizeof(*pdata)); if (ret) { dev_err(&pdev->dev, "failed to add platform_data\n"); - goto err4; + goto err5; } ret = platform_device_add(musb); if (ret) { dev_err(&pdev->dev, "failed to register musb device\n"); - goto err4; + goto err5; } return 0; -err4: +err5: clk_disable(clk); -err3: +err4: clk_put(clk); -err2: +err3: platform_device_put(musb); +err2: + musb_put_id(&pdev->dev, musbid); + err1: kfree(glue); @@ -146,6 +158,7 @@ static int __devexit ux500_remove(struct platform_device *pdev) { struct ux500_glue *glue = platform_get_drvdata(pdev); + musb_put_id(&pdev->dev, glue->musb->id); platform_device_del(glue->musb); platform_device_put(glue->musb); clk_disable(glue->clk); diff --git a/drivers/usb/musb/ux500_dma.c b/drivers/usb/musb/ux500_dma.c index d05c7fbbb703..639d58ee24f9 100644 --- a/drivers/usb/musb/ux500_dma.c +++ b/drivers/usb/musb/ux500_dma.c @@ -364,7 +364,7 @@ void dma_controller_destroy(struct dma_controller *c) kfree(controller); } -struct dma_controller *__init +struct dma_controller *__devinit dma_controller_create(struct musb *musb, void __iomem *base) { struct ux500_dma_controller *controller; diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig index 13fd1ddf742f..d8c8a42bff3e 100644 --- a/drivers/usb/otg/Kconfig +++ b/drivers/usb/otg/Kconfig @@ -68,7 +68,7 @@ config TWL4030_USB config TWL6030_USB tristate "TWL6030 USB Transceiver Driver" - depends on TWL4030_CORE + depends on TWL4030_CORE && OMAP_USB2 select USB_OTG_UTILS help Enable this to support the USB OTG transceiver on TWL6030 diff --git a/drivers/usb/otg/fsl_otg.c b/drivers/usb/otg/fsl_otg.c index 23c798cb2d7f..c19d1d7173a9 100644 --- a/drivers/usb/otg/fsl_otg.c +++ b/drivers/usb/otg/fsl_otg.c @@ -544,9 +544,13 @@ int fsl_otg_start_gadget(struct otg_fsm *fsm, int on) */ static int fsl_otg_set_host(struct usb_otg *otg, struct usb_bus *host) { - struct fsl_otg *otg_dev = container_of(otg->phy, struct fsl_otg, phy); + struct fsl_otg *otg_dev; + + if (!otg) + return -ENODEV; - if (!otg || otg_dev != fsl_otg_dev) + otg_dev = container_of(otg->phy, struct fsl_otg, phy); + if (otg_dev != fsl_otg_dev) return -ENODEV; otg->host = host; @@ -590,12 +594,15 @@ static int fsl_otg_set_host(struct usb_otg *otg, struct usb_bus *host) static int fsl_otg_set_peripheral(struct usb_otg *otg, struct usb_gadget *gadget) { - struct fsl_otg *otg_dev = container_of(otg->phy, struct fsl_otg, phy); + struct fsl_otg *otg_dev; + if (!otg) + return -ENODEV; + + otg_dev = container_of(otg->phy, struct fsl_otg, phy); VDBG("otg_dev 0x%x\n", (int)otg_dev); VDBG("fsl_otg_dev 0x%x\n", (int)fsl_otg_dev); - - if (!otg || otg_dev != fsl_otg_dev) + if (otg_dev != fsl_otg_dev) return -ENODEV; if (!gadget) { @@ -660,10 +667,13 @@ static void fsl_otg_event(struct work_struct *work) /* B-device start SRP */ static int fsl_otg_start_srp(struct usb_otg *otg) { - struct fsl_otg *otg_dev = container_of(otg->phy, struct fsl_otg, phy); + struct fsl_otg *otg_dev; + + if (!otg || otg->phy->state != OTG_STATE_B_IDLE) + return -ENODEV; - if (!otg || otg_dev != fsl_otg_dev - || otg->phy->state != OTG_STATE_B_IDLE) + otg_dev = container_of(otg->phy, struct fsl_otg, phy); + if (otg_dev != fsl_otg_dev) return -ENODEV; otg_dev->fsm.b_bus_req = 1; @@ -675,9 +685,13 @@ static int fsl_otg_start_srp(struct usb_otg *otg) /* A_host suspend will call this function to start hnp */ static int fsl_otg_start_hnp(struct usb_otg *otg) { - struct fsl_otg *otg_dev = container_of(otg->phy, struct fsl_otg, phy); + struct fsl_otg *otg_dev; + + if (!otg) + return -ENODEV; - if (!otg || otg_dev != fsl_otg_dev) + otg_dev = container_of(otg->phy, struct fsl_otg, phy); + if (otg_dev != fsl_otg_dev) return -ENODEV; DBG("start_hnp...n"); diff --git a/drivers/usb/otg/mxs-phy.c b/drivers/usb/otg/mxs-phy.c index c1a67cb8e244..88db976647cf 100644 --- a/drivers/usb/otg/mxs-phy.c +++ b/drivers/usb/otg/mxs-phy.c @@ -20,6 +20,7 @@ #include <linux/delay.h> #include <linux/err.h> #include <linux/io.h> +#include <linux/workqueue.h> #define DRIVER_NAME "mxs_phy" @@ -34,9 +35,16 @@ #define BM_USBPHY_CTRL_ENUTMILEVEL2 BIT(14) #define BM_USBPHY_CTRL_ENHOSTDISCONDETECT BIT(1) +/* + * Amount of delay in miliseconds to safely enable ENHOSTDISCONDETECT bit + * so that connection and reset processing can be completed for the root hub. + */ +#define MXY_PHY_ENHOSTDISCONDETECT_DELAY 250 + struct mxs_phy { struct usb_phy phy; struct clk *clk; + struct delayed_work enhostdiscondetect_work; }; #define to_mxs_phy(p) container_of((p), struct mxs_phy, phy) @@ -62,6 +70,7 @@ static int mxs_phy_init(struct usb_phy *phy) clk_prepare_enable(mxs_phy->clk); mxs_phy_hw_init(mxs_phy); + INIT_DELAYED_WORK(&mxs_phy->enhostdiscondetect_work, NULL); return 0; } @@ -76,13 +85,34 @@ static void mxs_phy_shutdown(struct usb_phy *phy) clk_disable_unprepare(mxs_phy->clk); } +static void mxs_phy_enhostdiscondetect_delay(struct work_struct *ws) +{ + struct mxs_phy *mxs_phy = container_of(ws, struct mxs_phy, + enhostdiscondetect_work.work); + + /* Enable HOSTDISCONDETECT after delay. */ + dev_dbg(mxs_phy->phy.dev, "Setting ENHOSTDISCONDETECT\n"); + writel_relaxed(BM_USBPHY_CTRL_ENHOSTDISCONDETECT, + mxs_phy->phy.io_priv + HW_USBPHY_CTRL_SET); +} + static int mxs_phy_on_connect(struct usb_phy *phy, int port) { + struct mxs_phy *mxs_phy = to_mxs_phy(phy); + dev_dbg(phy->dev, "Connect on port %d\n", port); - mxs_phy_hw_init(to_mxs_phy(phy)); - writel_relaxed(BM_USBPHY_CTRL_ENHOSTDISCONDETECT, - phy->io_priv + HW_USBPHY_CTRL_SET); + mxs_phy_hw_init(mxs_phy); + + /* + * Delay enabling ENHOSTDISCONDETECT so that connection and + * reset processing can be completed for the root hub. + */ + dev_dbg(phy->dev, "Delaying setting ENHOSTDISCONDETECT\n"); + PREPARE_DELAYED_WORK(&mxs_phy->enhostdiscondetect_work, + mxs_phy_enhostdiscondetect_delay); + schedule_delayed_work(&mxs_phy->enhostdiscondetect_work, + msecs_to_jiffies(MXY_PHY_ENHOSTDISCONDETECT_DELAY)); return 0; } @@ -91,6 +121,8 @@ static int mxs_phy_on_disconnect(struct usb_phy *phy, int port) { dev_dbg(phy->dev, "Disconnect on port %d\n", port); + /* No need to delay before clearing ENHOSTDISCONDETECT. */ + dev_dbg(phy->dev, "Clearing ENHOSTDISCONDETECT\n"); writel_relaxed(BM_USBPHY_CTRL_ENHOSTDISCONDETECT, phy->io_priv + HW_USBPHY_CTRL_CLR); diff --git a/drivers/usb/otg/nop-usb-xceiv.c b/drivers/usb/otg/nop-usb-xceiv.c index 803f958f4133..e52e35e7adaf 100644 --- a/drivers/usb/otg/nop-usb-xceiv.c +++ b/drivers/usb/otg/nop-usb-xceiv.c @@ -30,6 +30,7 @@ #include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <linux/usb/otg.h> +#include <linux/usb/nop-usb-xceiv.h> #include <linux/slab.h> struct nop_usb_xceiv { @@ -94,7 +95,9 @@ static int nop_set_host(struct usb_otg *otg, struct usb_bus *host) static int __devinit nop_usb_xceiv_probe(struct platform_device *pdev) { + struct nop_usb_xceiv_platform_data *pdata = pdev->dev.platform_data; struct nop_usb_xceiv *nop; + enum usb_phy_type type = USB_PHY_TYPE_USB2; int err; nop = kzalloc(sizeof *nop, GFP_KERNEL); @@ -107,6 +110,9 @@ static int __devinit nop_usb_xceiv_probe(struct platform_device *pdev) return -ENOMEM; } + if (pdata) + type = pdata->type; + nop->dev = &pdev->dev; nop->phy.dev = nop->dev; nop->phy.label = "nop-xceiv"; @@ -117,7 +123,7 @@ static int __devinit nop_usb_xceiv_probe(struct platform_device *pdev) nop->phy.otg->set_host = nop_set_host; nop->phy.otg->set_peripheral = nop_set_peripheral; - err = usb_add_phy(&nop->phy, USB_PHY_TYPE_USB2); + err = usb_add_phy(&nop->phy, type); if (err) { dev_err(&pdev->dev, "can't register transceiver, err: %d\n", err); diff --git a/drivers/usb/otg/otg.c b/drivers/usb/otg/otg.c index 1bf60a22595c..a30c04115115 100644 --- a/drivers/usb/otg/otg.c +++ b/drivers/usb/otg/otg.c @@ -159,7 +159,7 @@ int usb_add_phy(struct usb_phy *x, enum usb_phy_type type) unsigned long flags; struct usb_phy *phy; - if (x && x->type != USB_PHY_TYPE_UNDEFINED) { + if (x->type != USB_PHY_TYPE_UNDEFINED) { dev_err(x->dev, "not accepting initialized PHY %s\n", x->label); return -EINVAL; } diff --git a/drivers/usb/otg/twl4030-usb.c b/drivers/usb/otg/twl4030-usb.c index 523cad5bfea9..f0d2e7530cfe 100644 --- a/drivers/usb/otg/twl4030-usb.c +++ b/drivers/usb/otg/twl4030-usb.c @@ -585,23 +585,28 @@ static int __devinit twl4030_usb_probe(struct platform_device *pdev) struct twl4030_usb *twl; int status, err; struct usb_otg *otg; - - if (!pdata) { - dev_dbg(&pdev->dev, "platform_data not available\n"); - return -EINVAL; - } + struct device_node *np = pdev->dev.of_node; twl = devm_kzalloc(&pdev->dev, sizeof *twl, GFP_KERNEL); if (!twl) return -ENOMEM; + if (np) + of_property_read_u32(np, "usb_mode", + (enum twl4030_usb_mode *)&twl->usb_mode); + else if (pdata) + twl->usb_mode = pdata->usb_mode; + else { + dev_err(&pdev->dev, "twl4030 initialized without pdata\n"); + return -EINVAL; + } + otg = devm_kzalloc(&pdev->dev, sizeof *otg, GFP_KERNEL); if (!otg) return -ENOMEM; twl->dev = &pdev->dev; twl->irq = platform_get_irq(pdev, 0); - twl->usb_mode = pdata->usb_mode; twl->vbus_supplied = false; twl->asleep = 1; twl->linkstat = OMAP_MUSB_UNKNOWN; @@ -690,12 +695,21 @@ static int __exit twl4030_usb_remove(struct platform_device *pdev) return 0; } +#ifdef CONFIG_OF +static const struct of_device_id twl4030_usb_id_table[] = { + { .compatible = "ti,twl4030-usb" }, + {} +}; +MODULE_DEVICE_TABLE(of, twl4030_usb_id_table); +#endif + static struct platform_driver twl4030_usb_driver = { .probe = twl4030_usb_probe, .remove = __exit_p(twl4030_usb_remove), .driver = { .name = "twl4030_usb", .owner = THIS_MODULE, + .of_match_table = of_match_ptr(twl4030_usb_id_table), }, }; diff --git a/drivers/usb/otg/twl6030-usb.c b/drivers/usb/otg/twl6030-usb.c index 6907d8df7a27..fcadef7864f1 100644 --- a/drivers/usb/otg/twl6030-usb.c +++ b/drivers/usb/otg/twl6030-usb.c @@ -25,8 +25,9 @@ #include <linux/interrupt.h> #include <linux/platform_device.h> #include <linux/io.h> -#include <linux/usb/otg.h> #include <linux/usb/musb-omap.h> +#include <linux/usb/phy_companion.h> +#include <linux/usb/omap_usb.h> #include <linux/i2c/twl.h> #include <linux/regulator/consumer.h> #include <linux/err.h> @@ -87,7 +88,7 @@ #define VBUS_DET BIT(2) struct twl6030_usb { - struct usb_phy phy; + struct phy_companion comparator; struct device *dev; /* for vbus reporting with irqs disabled */ @@ -104,10 +105,10 @@ struct twl6030_usb { u8 asleep; bool irq_enabled; bool vbus_enable; - unsigned long features; + const char *regulator; }; -#define phy_to_twl(x) container_of((x), struct twl6030_usb, phy) +#define comparator_to_twl(x) container_of((x), struct twl6030_usb, comparator) /*-------------------------------------------------------------------------*/ @@ -137,50 +138,9 @@ static inline u8 twl6030_readb(struct twl6030_usb *twl, u8 module, u8 address) return ret; } -static int twl6030_phy_init(struct usb_phy *x) +static int twl6030_start_srp(struct phy_companion *comparator) { - struct twl6030_usb *twl; - struct device *dev; - struct twl4030_usb_data *pdata; - - twl = phy_to_twl(x); - dev = twl->dev; - pdata = dev->platform_data; - - if (twl->linkstat == OMAP_MUSB_ID_GROUND) - pdata->phy_power(twl->dev, 1, 1); - else - pdata->phy_power(twl->dev, 0, 1); - - return 0; -} - -static void twl6030_phy_shutdown(struct usb_phy *x) -{ - struct twl6030_usb *twl; - struct device *dev; - struct twl4030_usb_data *pdata; - - twl = phy_to_twl(x); - dev = twl->dev; - pdata = dev->platform_data; - pdata->phy_power(twl->dev, 0, 0); -} - -static int twl6030_phy_suspend(struct usb_phy *x, int suspend) -{ - struct twl6030_usb *twl = phy_to_twl(x); - struct device *dev = twl->dev; - struct twl4030_usb_data *pdata = dev->platform_data; - - pdata->phy_suspend(dev, suspend); - - return 0; -} - -static int twl6030_start_srp(struct usb_otg *otg) -{ - struct twl6030_usb *twl = phy_to_twl(otg->phy); + struct twl6030_usb *twl = comparator_to_twl(comparator); twl6030_writeb(twl, TWL_MODULE_USB, 0x24, USB_VBUS_CTRL_SET); twl6030_writeb(twl, TWL_MODULE_USB, 0x84, USB_VBUS_CTRL_SET); @@ -193,13 +153,6 @@ static int twl6030_start_srp(struct usb_otg *otg) static int twl6030_usb_ldo_init(struct twl6030_usb *twl) { - char *regulator_name; - - if (twl->features & TWL6025_SUBCLASS) - regulator_name = "ldousb"; - else - regulator_name = "vusb"; - /* Set to OTG_REV 1.3 and turn on the ID_WAKEUP_COMP */ twl6030_writeb(twl, TWL6030_MODULE_ID0 , 0x1, TWL6030_BACKUP_REG); @@ -209,7 +162,7 @@ static int twl6030_usb_ldo_init(struct twl6030_usb *twl) /* Program MISC2 register and set bit VUSB_IN_VBAT */ twl6030_writeb(twl, TWL6030_MODULE_ID0 , 0x10, TWL6030_MISC2); - twl->usb3v3 = regulator_get(twl->dev, regulator_name); + twl->usb3v3 = regulator_get(twl->dev, twl->regulator); if (IS_ERR(twl->usb3v3)) return -ENODEV; @@ -313,23 +266,8 @@ static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl) return IRQ_HANDLED; } -static int twl6030_set_peripheral(struct usb_otg *otg, - struct usb_gadget *gadget) -{ - if (!otg) - return -ENODEV; - - otg->gadget = gadget; - if (!gadget) - otg->phy->state = OTG_STATE_UNDEFINED; - - return 0; -} - -static int twl6030_enable_irq(struct usb_phy *x) +static int twl6030_enable_irq(struct twl6030_usb *twl) { - struct twl6030_usb *twl = phy_to_twl(x); - twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_SET); twl6030_interrupt_unmask(0x05, REG_INT_MSK_LINE_C); twl6030_interrupt_unmask(0x05, REG_INT_MSK_STS_C); @@ -362,9 +300,9 @@ static void otg_set_vbus_work(struct work_struct *data) CHARGERUSB_CTRL1); } -static int twl6030_set_vbus(struct usb_otg *otg, bool enabled) +static int twl6030_set_vbus(struct phy_companion *comparator, bool enabled) { - struct twl6030_usb *twl = phy_to_twl(otg->phy); + struct twl6030_usb *twl = comparator_to_twl(comparator); twl->vbus_enable = enabled; schedule_work(&twl->set_vbus_work); @@ -372,52 +310,44 @@ static int twl6030_set_vbus(struct usb_otg *otg, bool enabled) return 0; } -static int twl6030_set_host(struct usb_otg *otg, struct usb_bus *host) -{ - if (!otg) - return -ENODEV; - - otg->host = host; - if (!host) - otg->phy->state = OTG_STATE_UNDEFINED; - return 0; -} - static int __devinit twl6030_usb_probe(struct platform_device *pdev) { + u32 ret; struct twl6030_usb *twl; int status, err; - struct twl4030_usb_data *pdata; - struct usb_otg *otg; - struct device *dev = &pdev->dev; - pdata = dev->platform_data; + struct device_node *np = pdev->dev.of_node; + struct device *dev = &pdev->dev; + struct twl4030_usb_data *pdata = dev->platform_data; twl = devm_kzalloc(dev, sizeof *twl, GFP_KERNEL); if (!twl) return -ENOMEM; - otg = devm_kzalloc(dev, sizeof *otg, GFP_KERNEL); - if (!otg) - return -ENOMEM; - twl->dev = &pdev->dev; twl->irq1 = platform_get_irq(pdev, 0); twl->irq2 = platform_get_irq(pdev, 1); - twl->features = pdata->features; twl->linkstat = OMAP_MUSB_UNKNOWN; - twl->phy.dev = twl->dev; - twl->phy.label = "twl6030"; - twl->phy.otg = otg; - twl->phy.init = twl6030_phy_init; - twl->phy.shutdown = twl6030_phy_shutdown; - twl->phy.set_suspend = twl6030_phy_suspend; + twl->comparator.set_vbus = twl6030_set_vbus; + twl->comparator.start_srp = twl6030_start_srp; + + ret = omap_usb2_set_comparator(&twl->comparator); + if (ret == -ENODEV) { + dev_info(&pdev->dev, "phy not ready, deferring probe"); + return -EPROBE_DEFER; + } - otg->phy = &twl->phy; - otg->set_host = twl6030_set_host; - otg->set_peripheral = twl6030_set_peripheral; - otg->set_vbus = twl6030_set_vbus; - otg->start_srp = twl6030_start_srp; + if (np) { + twl->regulator = "usb"; + } else if (pdata) { + if (pdata->features & TWL6025_SUBCLASS) + twl->regulator = "ldousb"; + else + twl->regulator = "vusb"; + } else { + dev_err(&pdev->dev, "twl6030 initialized without pdata\n"); + return -EINVAL; + } /* init spinlock for workqueue */ spin_lock_init(&twl->lock); @@ -427,7 +357,6 @@ static int __devinit twl6030_usb_probe(struct platform_device *pdev) dev_err(&pdev->dev, "ldo init failed\n"); return err; } - usb_add_phy(&twl->phy, USB_PHY_TYPE_USB2); platform_set_drvdata(pdev, twl); if (device_create_file(&pdev->dev, &dev_attr_vbus)) @@ -458,9 +387,7 @@ static int __devinit twl6030_usb_probe(struct platform_device *pdev) } twl->asleep = 0; - pdata->phy_init(dev); - twl6030_phy_suspend(&twl->phy, 0); - twl6030_enable_irq(&twl->phy); + twl6030_enable_irq(twl); dev_info(&pdev->dev, "Initialized TWL6030 USB module\n"); return 0; @@ -470,10 +397,6 @@ static int __exit twl6030_usb_remove(struct platform_device *pdev) { struct twl6030_usb *twl = platform_get_drvdata(pdev); - struct twl4030_usb_data *pdata; - struct device *dev = &pdev->dev; - pdata = dev->platform_data; - twl6030_interrupt_mask(TWL6030_USBOTG_INT_MASK, REG_INT_MSK_LINE_C); twl6030_interrupt_mask(TWL6030_USBOTG_INT_MASK, @@ -481,19 +404,27 @@ static int __exit twl6030_usb_remove(struct platform_device *pdev) free_irq(twl->irq1, twl); free_irq(twl->irq2, twl); regulator_put(twl->usb3v3); - pdata->phy_exit(twl->dev); device_remove_file(twl->dev, &dev_attr_vbus); cancel_work_sync(&twl->set_vbus_work); return 0; } +#ifdef CONFIG_OF +static const struct of_device_id twl6030_usb_id_table[] = { + { .compatible = "ti,twl6030-usb" }, + {} +}; +MODULE_DEVICE_TABLE(of, twl6030_usb_id_table); +#endif + static struct platform_driver twl6030_usb_driver = { .probe = twl6030_usb_probe, .remove = __exit_p(twl6030_usb_remove), .driver = { .name = "twl6030_usb", .owner = THIS_MODULE, + .of_match_table = of_match_ptr(twl6030_usb_id_table), }, }; diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index e7cf84f0751a..63c339b3e676 100644 --- a/drivers/usb/phy/Kconfig +++ b/drivers/usb/phy/Kconfig @@ -4,6 +4,15 @@ comment "USB Physical Layer drivers" depends on USB || USB_GADGET +config OMAP_USB2 + tristate "OMAP USB2 PHY Driver" + select USB_OTG_UTILS + help + Enable this to support the transceiver that is part of SOC. This + driver takes care of all the PHY functionality apart from comparator. + The USB OTG controller communicates with the comparator using this + driver. + config USB_ISP1301 tristate "NXP ISP1301 USB transceiver support" depends on USB || USB_GADGET @@ -15,3 +24,11 @@ config USB_ISP1301 To compile this driver as a module, choose M here: the module will be called isp1301. + +config MV_U3D_PHY + bool "Marvell USB 3.0 PHY controller Driver" + depends on USB_MV_U3D + select USB_OTG_UTILS + help + Enable this to support Marvell USB 3.0 phy controller for Marvell + SoC. diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile index eca095b1a890..b069f29f1225 100644 --- a/drivers/usb/phy/Makefile +++ b/drivers/usb/phy/Makefile @@ -4,4 +4,7 @@ ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG +obj-$(CONFIG_OMAP_USB2) += omap-usb2.o obj-$(CONFIG_USB_ISP1301) += isp1301.o +obj-$(CONFIG_MV_U3D_PHY) += mv_u3d_phy.o +obj-$(CONFIG_USB_EHCI_TEGRA) += tegra_usb_phy.o diff --git a/drivers/usb/phy/isp1301.c b/drivers/usb/phy/isp1301.c index b19f4932a037..18dbf7e37607 100644 --- a/drivers/usb/phy/isp1301.c +++ b/drivers/usb/phy/isp1301.c @@ -15,12 +15,6 @@ #define DRV_NAME "isp1301" -#define ISP1301_I2C_ADDR 0x2C - -static const unsigned short normal_i2c[] = { - ISP1301_I2C_ADDR, ISP1301_I2C_ADDR + 1, I2C_CLIENT_END -}; - static const struct i2c_device_id isp1301_id[] = { { "isp1301", 0 }, { } diff --git a/drivers/usb/phy/mv_u3d_phy.c b/drivers/usb/phy/mv_u3d_phy.c new file mode 100644 index 000000000000..9f1c5d3c60ec --- /dev/null +++ b/drivers/usb/phy/mv_u3d_phy.c @@ -0,0 +1,345 @@ +/* + * Copyright (C) 2011 Marvell International Ltd. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/usb/otg.h> +#include <linux/platform_data/mv_usb.h> + +#include "mv_u3d_phy.h" + +/* + * struct mv_u3d_phy - transceiver driver state + * @phy: transceiver structure + * @dev: The parent device supplied to the probe function + * @clk: usb phy clock + * @base: usb phy register memory base + */ +struct mv_u3d_phy { + struct usb_phy phy; + struct mv_usb_platform_data *plat; + struct device *dev; + struct clk *clk; + void __iomem *base; +}; + +static u32 mv_u3d_phy_read(void __iomem *base, u32 reg) +{ + void __iomem *addr, *data; + + addr = base; + data = base + 0x4; + + writel_relaxed(reg, addr); + return readl_relaxed(data); +} + +static void mv_u3d_phy_set(void __iomem *base, u32 reg, u32 value) +{ + void __iomem *addr, *data; + u32 tmp; + + addr = base; + data = base + 0x4; + + writel_relaxed(reg, addr); + tmp = readl_relaxed(data); + tmp |= value; + writel_relaxed(tmp, data); +} + +static void mv_u3d_phy_clear(void __iomem *base, u32 reg, u32 value) +{ + void __iomem *addr, *data; + u32 tmp; + + addr = base; + data = base + 0x4; + + writel_relaxed(reg, addr); + tmp = readl_relaxed(data); + tmp &= ~value; + writel_relaxed(tmp, data); +} + +static void mv_u3d_phy_write(void __iomem *base, u32 reg, u32 value) +{ + void __iomem *addr, *data; + + addr = base; + data = base + 0x4; + + writel_relaxed(reg, addr); + writel_relaxed(value, data); +} + +void mv_u3d_phy_shutdown(struct usb_phy *phy) +{ + struct mv_u3d_phy *mv_u3d_phy; + void __iomem *base; + u32 val; + + mv_u3d_phy = container_of(phy, struct mv_u3d_phy, phy); + base = mv_u3d_phy->base; + + /* Power down Reference Analog current, bit 15 + * Power down PLL, bit 14 + * Power down Receiver, bit 13 + * Power down Transmitter, bit 12 + * of USB3_POWER_PLL_CONTROL register + */ + val = mv_u3d_phy_read(base, USB3_POWER_PLL_CONTROL); + val &= ~(USB3_POWER_PLL_CONTROL_PU); + mv_u3d_phy_write(base, USB3_POWER_PLL_CONTROL, val); + + if (mv_u3d_phy->clk) + clk_disable(mv_u3d_phy->clk); +} + +static int mv_u3d_phy_init(struct usb_phy *phy) +{ + struct mv_u3d_phy *mv_u3d_phy; + void __iomem *base; + u32 val, count; + + /* enable usb3 phy */ + mv_u3d_phy = container_of(phy, struct mv_u3d_phy, phy); + + if (mv_u3d_phy->clk) + clk_enable(mv_u3d_phy->clk); + + base = mv_u3d_phy->base; + + val = mv_u3d_phy_read(base, USB3_POWER_PLL_CONTROL); + val &= ~(USB3_POWER_PLL_CONTROL_PU_MASK); + val |= 0xF << USB3_POWER_PLL_CONTROL_PU_SHIFT; + mv_u3d_phy_write(base, USB3_POWER_PLL_CONTROL, val); + udelay(100); + + mv_u3d_phy_write(base, USB3_RESET_CONTROL, + USB3_RESET_CONTROL_RESET_PIPE); + udelay(100); + + mv_u3d_phy_write(base, USB3_RESET_CONTROL, + USB3_RESET_CONTROL_RESET_PIPE + | USB3_RESET_CONTROL_RESET_PHY); + udelay(100); + + val = mv_u3d_phy_read(base, USB3_POWER_PLL_CONTROL); + val &= ~(USB3_POWER_PLL_CONTROL_REF_FREF_SEL_MASK + | USB3_POWER_PLL_CONTROL_PHY_MODE_MASK); + val |= (USB3_PLL_25MHZ << USB3_POWER_PLL_CONTROL_REF_FREF_SEL_SHIFT) + | (0x5 << USB3_POWER_PLL_CONTROL_PHY_MODE_SHIFT); + mv_u3d_phy_write(base, USB3_POWER_PLL_CONTROL, val); + udelay(100); + + mv_u3d_phy_clear(base, USB3_KVCO_CALI_CONTROL, + USB3_KVCO_CALI_CONTROL_USE_MAX_PLL_RATE_MASK); + udelay(100); + + val = mv_u3d_phy_read(base, USB3_SQUELCH_FFE); + val &= ~(USB3_SQUELCH_FFE_FFE_CAP_SEL_MASK + | USB3_SQUELCH_FFE_FFE_RES_SEL_MASK + | USB3_SQUELCH_FFE_SQ_THRESH_IN_MASK); + val |= ((0xD << USB3_SQUELCH_FFE_FFE_CAP_SEL_SHIFT) + | (0x7 << USB3_SQUELCH_FFE_FFE_RES_SEL_SHIFT) + | (0x8 << USB3_SQUELCH_FFE_SQ_THRESH_IN_SHIFT)); + mv_u3d_phy_write(base, USB3_SQUELCH_FFE, val); + udelay(100); + + val = mv_u3d_phy_read(base, USB3_GEN1_SET0); + val &= ~USB3_GEN1_SET0_G1_TX_SLEW_CTRL_EN_MASK; + val |= 1 << USB3_GEN1_SET0_G1_TX_EMPH_EN_SHIFT; + mv_u3d_phy_write(base, USB3_GEN1_SET0, val); + udelay(100); + + val = mv_u3d_phy_read(base, USB3_GEN2_SET0); + val &= ~(USB3_GEN2_SET0_G2_TX_AMP_MASK + | USB3_GEN2_SET0_G2_TX_EMPH_AMP_MASK + | USB3_GEN2_SET0_G2_TX_SLEW_CTRL_EN_MASK); + val |= ((0x14 << USB3_GEN2_SET0_G2_TX_AMP_SHIFT) + | (1 << USB3_GEN2_SET0_G2_TX_AMP_ADJ_SHIFT) + | (0xA << USB3_GEN2_SET0_G2_TX_EMPH_AMP_SHIFT) + | (1 << USB3_GEN2_SET0_G2_TX_EMPH_EN_SHIFT)); + mv_u3d_phy_write(base, USB3_GEN2_SET0, val); + udelay(100); + + mv_u3d_phy_read(base, USB3_TX_EMPPH); + val &= ~(USB3_TX_EMPPH_AMP_MASK + | USB3_TX_EMPPH_EN_MASK + | USB3_TX_EMPPH_AMP_FORCE_MASK + | USB3_TX_EMPPH_PAR1_MASK + | USB3_TX_EMPPH_PAR2_MASK); + val |= ((0xB << USB3_TX_EMPPH_AMP_SHIFT) + | (1 << USB3_TX_EMPPH_EN_SHIFT) + | (1 << USB3_TX_EMPPH_AMP_FORCE_SHIFT) + | (0x1C << USB3_TX_EMPPH_PAR1_SHIFT) + | (1 << USB3_TX_EMPPH_PAR2_SHIFT)); + + mv_u3d_phy_write(base, USB3_TX_EMPPH, val); + udelay(100); + + val = mv_u3d_phy_read(base, USB3_GEN2_SET1); + val &= ~(USB3_GEN2_SET1_G2_RX_SELMUPI_MASK + | USB3_GEN2_SET1_G2_RX_SELMUPF_MASK + | USB3_GEN2_SET1_G2_RX_SELMUFI_MASK + | USB3_GEN2_SET1_G2_RX_SELMUFF_MASK); + val |= ((1 << USB3_GEN2_SET1_G2_RX_SELMUPI_SHIFT) + | (1 << USB3_GEN2_SET1_G2_RX_SELMUPF_SHIFT) + | (1 << USB3_GEN2_SET1_G2_RX_SELMUFI_SHIFT) + | (1 << USB3_GEN2_SET1_G2_RX_SELMUFF_SHIFT)); + mv_u3d_phy_write(base, USB3_GEN2_SET1, val); + udelay(100); + + val = mv_u3d_phy_read(base, USB3_DIGITAL_LOOPBACK_EN); + val &= ~USB3_DIGITAL_LOOPBACK_EN_SEL_BITS_MASK; + val |= 1 << USB3_DIGITAL_LOOPBACK_EN_SEL_BITS_SHIFT; + mv_u3d_phy_write(base, USB3_DIGITAL_LOOPBACK_EN, val); + udelay(100); + + val = mv_u3d_phy_read(base, USB3_IMPEDANCE_TX_SSC); + val &= ~USB3_IMPEDANCE_TX_SSC_SSC_AMP_MASK; + val |= 0xC << USB3_IMPEDANCE_TX_SSC_SSC_AMP_SHIFT; + mv_u3d_phy_write(base, USB3_IMPEDANCE_TX_SSC, val); + udelay(100); + + val = mv_u3d_phy_read(base, USB3_IMPEDANCE_CALI_CTRL); + val &= ~USB3_IMPEDANCE_CALI_CTRL_IMP_CAL_THR_MASK; + val |= 0x4 << USB3_IMPEDANCE_CALI_CTRL_IMP_CAL_THR_SHIFT; + mv_u3d_phy_write(base, USB3_IMPEDANCE_CALI_CTRL, val); + udelay(100); + + val = mv_u3d_phy_read(base, USB3_PHY_ISOLATION_MODE); + val &= ~(USB3_PHY_ISOLATION_MODE_PHY_GEN_RX_MASK + | USB3_PHY_ISOLATION_MODE_PHY_GEN_TX_MASK + | USB3_PHY_ISOLATION_MODE_TX_DRV_IDLE_MASK); + val |= ((1 << USB3_PHY_ISOLATION_MODE_PHY_GEN_RX_SHIFT) + | (1 << USB3_PHY_ISOLATION_MODE_PHY_GEN_TX_SHIFT)); + mv_u3d_phy_write(base, USB3_PHY_ISOLATION_MODE, val); + udelay(100); + + val = mv_u3d_phy_read(base, USB3_TXDETRX); + val &= ~(USB3_TXDETRX_VTHSEL_MASK); + val |= 0x1 << USB3_TXDETRX_VTHSEL_SHIFT; + mv_u3d_phy_write(base, USB3_TXDETRX, val); + udelay(100); + + dev_dbg(mv_u3d_phy->dev, "start calibration\n"); + +calstart: + /* Perform Manual Calibration */ + mv_u3d_phy_set(base, USB3_KVCO_CALI_CONTROL, + 1 << USB3_KVCO_CALI_CONTROL_CAL_START_SHIFT); + + mdelay(1); + + count = 0; + while (1) { + val = mv_u3d_phy_read(base, USB3_KVCO_CALI_CONTROL); + if (val & (1 << USB3_KVCO_CALI_CONTROL_CAL_DONE_SHIFT)) + break; + else if (count > 50) { + dev_dbg(mv_u3d_phy->dev, "calibration failure, retry...\n"); + goto calstart; + } + count++; + mdelay(1); + } + + /* active PIPE interface */ + mv_u3d_phy_write(base, USB3_PIPE_SM_CTRL, + 1 << USB3_PIPE_SM_CTRL_PHY_INIT_DONE); + + return 0; +} + +static int __devinit mv_u3d_phy_probe(struct platform_device *pdev) +{ + struct mv_u3d_phy *mv_u3d_phy; + struct mv_usb_platform_data *pdata; + struct device *dev = &pdev->dev; + struct resource *res; + void __iomem *phy_base; + int ret; + + pdata = pdev->dev.platform_data; + if (!pdata) { + dev_err(&pdev->dev, "%s: no platform data defined\n", __func__); + return -EINVAL; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(dev, "missing mem resource\n"); + return -ENODEV; + } + + phy_base = devm_request_and_ioremap(dev, res); + if (!phy_base) { + dev_err(dev, "%s: register mapping failed\n", __func__); + return -ENXIO; + } + + mv_u3d_phy = devm_kzalloc(dev, sizeof(*mv_u3d_phy), GFP_KERNEL); + if (!mv_u3d_phy) + return -ENOMEM; + + mv_u3d_phy->dev = &pdev->dev; + mv_u3d_phy->plat = pdata; + mv_u3d_phy->base = phy_base; + mv_u3d_phy->phy.dev = mv_u3d_phy->dev; + mv_u3d_phy->phy.label = "mv-u3d-phy"; + mv_u3d_phy->phy.init = mv_u3d_phy_init; + mv_u3d_phy->phy.shutdown = mv_u3d_phy_shutdown; + + ret = usb_add_phy(&mv_u3d_phy->phy, USB_PHY_TYPE_USB3); + if (ret) + goto err; + + if (!mv_u3d_phy->clk) + mv_u3d_phy->clk = clk_get(mv_u3d_phy->dev, "u3dphy"); + + platform_set_drvdata(pdev, mv_u3d_phy); + + dev_info(&pdev->dev, "Initialized Marvell USB 3.0 PHY\n"); +err: + return ret; +} + +static int __exit mv_u3d_phy_remove(struct platform_device *pdev) +{ + struct mv_u3d_phy *mv_u3d_phy = platform_get_drvdata(pdev); + + usb_remove_phy(&mv_u3d_phy->phy); + + if (mv_u3d_phy->clk) { + clk_put(mv_u3d_phy->clk); + mv_u3d_phy->clk = NULL; + } + + return 0; +} + +static struct platform_driver mv_u3d_phy_driver = { + .probe = mv_u3d_phy_probe, + .remove = __devexit_p(mv_u3d_phy_remove), + .driver = { + .name = "mv-u3d-phy", + .owner = THIS_MODULE, + }, +}; + +module_platform_driver(mv_u3d_phy_driver); +MODULE_DESCRIPTION("Marvell USB 3.0 PHY controller"); +MODULE_AUTHOR("Yu Xu <yuxu@marvell.com>"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:mv-u3d-phy"); diff --git a/drivers/usb/phy/mv_u3d_phy.h b/drivers/usb/phy/mv_u3d_phy.h new file mode 100644 index 000000000000..2a658cb9a527 --- /dev/null +++ b/drivers/usb/phy/mv_u3d_phy.h @@ -0,0 +1,105 @@ +/* + * Copyright (C) 2011 Marvell International Ltd. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + */ + +#ifndef __MV_U3D_PHY_H +#define __MV_U3D_PHY_H + +#define USB3_POWER_PLL_CONTROL 0x1 +#define USB3_KVCO_CALI_CONTROL 0x2 +#define USB3_IMPEDANCE_CALI_CTRL 0x3 +#define USB3_IMPEDANCE_TX_SSC 0x4 +#define USB3_SQUELCH_FFE 0x6 +#define USB3_GEN1_SET0 0xD +#define USB3_GEN2_SET0 0xF +#define USB3_GEN2_SET1 0x10 +#define USB3_DIGITAL_LOOPBACK_EN 0x23 +#define USB3_PHY_ISOLATION_MODE 0x26 +#define USB3_TXDETRX 0x48 +#define USB3_TX_EMPPH 0x5E +#define USB3_RESET_CONTROL 0x90 +#define USB3_PIPE_SM_CTRL 0x91 + +#define USB3_RESET_CONTROL_RESET_PIPE 0x1 +#define USB3_RESET_CONTROL_RESET_PHY 0x2 + +#define USB3_POWER_PLL_CONTROL_REF_FREF_SEL_MASK (0x1F << 0) +#define USB3_POWER_PLL_CONTROL_REF_FREF_SEL_SHIFT 0 +#define USB3_PLL_25MHZ 0x2 +#define USB3_PLL_26MHZ 0x5 +#define USB3_POWER_PLL_CONTROL_PHY_MODE_MASK (0x7 << 5) +#define USB3_POWER_PLL_CONTROL_PHY_MODE_SHIFT 5 +#define USB3_POWER_PLL_CONTROL_PU_MASK (0xF << 12) +#define USB3_POWER_PLL_CONTROL_PU_SHIFT 12 +#define USB3_POWER_PLL_CONTROL_PU (0xF << 12) + +#define USB3_KVCO_CALI_CONTROL_USE_MAX_PLL_RATE_MASK (0x1 << 12) +#define USB3_KVCO_CALI_CONTROL_USE_MAX_PLL_RATE_SHIFT 12 +#define USB3_KVCO_CALI_CONTROL_CAL_DONE_SHIFT 14 +#define USB3_KVCO_CALI_CONTROL_CAL_START_SHIFT 15 + +#define USB3_SQUELCH_FFE_FFE_CAP_SEL_MASK 0xF +#define USB3_SQUELCH_FFE_FFE_CAP_SEL_SHIFT 0 +#define USB3_SQUELCH_FFE_FFE_RES_SEL_MASK (0x7 << 4) +#define USB3_SQUELCH_FFE_FFE_RES_SEL_SHIFT 4 +#define USB3_SQUELCH_FFE_SQ_THRESH_IN_MASK (0x1F << 8) +#define USB3_SQUELCH_FFE_SQ_THRESH_IN_SHIFT 8 + +#define USB3_GEN1_SET0_G1_TX_SLEW_CTRL_EN_MASK (0x1 << 15) +#define USB3_GEN1_SET0_G1_TX_EMPH_EN_SHIFT 11 + +#define USB3_GEN2_SET0_G2_TX_AMP_MASK (0x1F << 1) +#define USB3_GEN2_SET0_G2_TX_AMP_SHIFT 1 +#define USB3_GEN2_SET0_G2_TX_AMP_ADJ_SHIFT 6 +#define USB3_GEN2_SET0_G2_TX_EMPH_AMP_MASK (0xF << 7) +#define USB3_GEN2_SET0_G2_TX_EMPH_AMP_SHIFT 7 +#define USB3_GEN2_SET0_G2_TX_EMPH_EN_MASK (0x1 << 11) +#define USB3_GEN2_SET0_G2_TX_EMPH_EN_SHIFT 11 +#define USB3_GEN2_SET0_G2_TX_SLEW_CTRL_EN_MASK (0x1 << 15) +#define USB3_GEN2_SET0_G2_TX_SLEW_CTRL_EN_SHIFT 15 + +#define USB3_GEN2_SET1_G2_RX_SELMUPI_MASK (0x7 << 0) +#define USB3_GEN2_SET1_G2_RX_SELMUPI_SHIFT 0 +#define USB3_GEN2_SET1_G2_RX_SELMUPF_MASK (0x7 << 3) +#define USB3_GEN2_SET1_G2_RX_SELMUPF_SHIFT 3 +#define USB3_GEN2_SET1_G2_RX_SELMUFI_MASK (0x3 << 6) +#define USB3_GEN2_SET1_G2_RX_SELMUFI_SHIFT 6 +#define USB3_GEN2_SET1_G2_RX_SELMUFF_MASK (0x3 << 8) +#define USB3_GEN2_SET1_G2_RX_SELMUFF_SHIFT 8 + +#define USB3_DIGITAL_LOOPBACK_EN_SEL_BITS_MASK (0x3 << 10) +#define USB3_DIGITAL_LOOPBACK_EN_SEL_BITS_SHIFT 10 + +#define USB3_IMPEDANCE_CALI_CTRL_IMP_CAL_THR_MASK (0x7 << 12) +#define USB3_IMPEDANCE_CALI_CTRL_IMP_CAL_THR_SHIFT 12 + +#define USB3_IMPEDANCE_TX_SSC_SSC_AMP_MASK (0x3F << 0) +#define USB3_IMPEDANCE_TX_SSC_SSC_AMP_SHIFT 0 + +#define USB3_PHY_ISOLATION_MODE_PHY_GEN_RX_MASK 0xF +#define USB3_PHY_ISOLATION_MODE_PHY_GEN_RX_SHIFT 0 +#define USB3_PHY_ISOLATION_MODE_PHY_GEN_TX_MASK (0xF << 4) +#define USB3_PHY_ISOLATION_MODE_PHY_GEN_TX_SHIFT 4 +#define USB3_PHY_ISOLATION_MODE_TX_DRV_IDLE_MASK (0x1 << 8) + +#define USB3_TXDETRX_VTHSEL_MASK (0x3 << 4) +#define USB3_TXDETRX_VTHSEL_SHIFT 4 + +#define USB3_TX_EMPPH_AMP_MASK (0xF << 0) +#define USB3_TX_EMPPH_AMP_SHIFT 0 +#define USB3_TX_EMPPH_EN_MASK (0x1 << 6) +#define USB3_TX_EMPPH_EN_SHIFT 6 +#define USB3_TX_EMPPH_AMP_FORCE_MASK (0x1 << 7) +#define USB3_TX_EMPPH_AMP_FORCE_SHIFT 7 +#define USB3_TX_EMPPH_PAR1_MASK (0x1F << 8) +#define USB3_TX_EMPPH_PAR1_SHIFT 8 +#define USB3_TX_EMPPH_PAR2_MASK (0x1 << 13) +#define USB3_TX_EMPPH_PAR2_SHIFT 13 + +#define USB3_PIPE_SM_CTRL_PHY_INIT_DONE 15 + +#endif /* __MV_U3D_PHY_H */ diff --git a/drivers/usb/phy/omap-usb2.c b/drivers/usb/phy/omap-usb2.c new file mode 100644 index 000000000000..15ab3d6f2e8c --- /dev/null +++ b/drivers/usb/phy/omap-usb2.c @@ -0,0 +1,271 @@ +/* + * omap-usb2.c - USB PHY, talking to musb controller in OMAP. + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Author: Kishon Vijay Abraham I <kishon@ti.com> + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/of.h> +#include <linux/io.h> +#include <linux/usb/omap_usb.h> +#include <linux/usb/phy_companion.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/pm_runtime.h> +#include <linux/delay.h> + +/** + * omap_usb2_set_comparator - links the comparator present in the sytem with + * this phy + * @comparator - the companion phy(comparator) for this phy + * + * The phy companion driver should call this API passing the phy_companion + * filled with set_vbus and start_srp to be used by usb phy. + * + * For use by phy companion driver + */ +int omap_usb2_set_comparator(struct phy_companion *comparator) +{ + struct omap_usb *phy; + struct usb_phy *x = usb_get_phy(USB_PHY_TYPE_USB2); + + if (IS_ERR(x)) + return -ENODEV; + + phy = phy_to_omapusb(x); + phy->comparator = comparator; + return 0; +} +EXPORT_SYMBOL_GPL(omap_usb2_set_comparator); + +/** + * omap_usb_phy_power - power on/off the phy using control module reg + * @phy: struct omap_usb * + * @on: 0 or 1, based on powering on or off the PHY + * + * XXX: Remove this function once control module driver gets merged + */ +static void omap_usb_phy_power(struct omap_usb *phy, int on) +{ + u32 val; + + if (on) { + val = readl(phy->control_dev); + if (val & PHY_PD) { + writel(~PHY_PD, phy->control_dev); + /* XXX: add proper documentation for this delay */ + mdelay(200); + } + } else { + writel(PHY_PD, phy->control_dev); + } +} + +static int omap_usb_set_vbus(struct usb_otg *otg, bool enabled) +{ + struct omap_usb *phy = phy_to_omapusb(otg->phy); + + if (!phy->comparator) + return -ENODEV; + + return phy->comparator->set_vbus(phy->comparator, enabled); +} + +static int omap_usb_start_srp(struct usb_otg *otg) +{ + struct omap_usb *phy = phy_to_omapusb(otg->phy); + + if (!phy->comparator) + return -ENODEV; + + return phy->comparator->start_srp(phy->comparator); +} + +static int omap_usb_set_host(struct usb_otg *otg, struct usb_bus *host) +{ + struct usb_phy *phy = otg->phy; + + otg->host = host; + if (!host) + phy->state = OTG_STATE_UNDEFINED; + + return 0; +} + +static int omap_usb_set_peripheral(struct usb_otg *otg, + struct usb_gadget *gadget) +{ + struct usb_phy *phy = otg->phy; + + otg->gadget = gadget; + if (!gadget) + phy->state = OTG_STATE_UNDEFINED; + + return 0; +} + +static int omap_usb2_suspend(struct usb_phy *x, int suspend) +{ + u32 ret; + struct omap_usb *phy = phy_to_omapusb(x); + + if (suspend && !phy->is_suspended) { + omap_usb_phy_power(phy, 0); + pm_runtime_put_sync(phy->dev); + phy->is_suspended = 1; + } else if (!suspend && phy->is_suspended) { + ret = pm_runtime_get_sync(phy->dev); + if (ret < 0) { + dev_err(phy->dev, "get_sync failed with err %d\n", + ret); + return ret; + } + omap_usb_phy_power(phy, 1); + phy->is_suspended = 0; + } + + return 0; +} + +static int __devinit omap_usb2_probe(struct platform_device *pdev) +{ + struct omap_usb *phy; + struct usb_otg *otg; + struct resource *res; + + phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL); + if (!phy) { + dev_err(&pdev->dev, "unable to allocate memory for USB2 PHY\n"); + return -ENOMEM; + } + + otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL); + if (!otg) { + dev_err(&pdev->dev, "unable to allocate memory for USB OTG\n"); + return -ENOMEM; + } + + phy->dev = &pdev->dev; + + phy->phy.dev = phy->dev; + phy->phy.label = "omap-usb2"; + phy->phy.set_suspend = omap_usb2_suspend; + phy->phy.otg = otg; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + + phy->control_dev = devm_request_and_ioremap(&pdev->dev, res); + if (phy->control_dev == NULL) { + dev_err(&pdev->dev, "Failed to obtain io memory\n"); + return -ENXIO; + } + + phy->is_suspended = 1; + omap_usb_phy_power(phy, 0); + + otg->set_host = omap_usb_set_host; + otg->set_peripheral = omap_usb_set_peripheral; + otg->set_vbus = omap_usb_set_vbus; + otg->start_srp = omap_usb_start_srp; + otg->phy = &phy->phy; + + phy->wkupclk = devm_clk_get(phy->dev, "usb_phy_cm_clk32k"); + if (IS_ERR(phy->wkupclk)) { + dev_err(&pdev->dev, "unable to get usb_phy_cm_clk32k\n"); + return PTR_ERR(phy->wkupclk); + } + clk_prepare(phy->wkupclk); + + usb_add_phy(&phy->phy, USB_PHY_TYPE_USB2); + + platform_set_drvdata(pdev, phy); + + pm_runtime_enable(phy->dev); + + return 0; +} + +static int __devexit omap_usb2_remove(struct platform_device *pdev) +{ + struct omap_usb *phy = platform_get_drvdata(pdev); + + clk_unprepare(phy->wkupclk); + usb_remove_phy(&phy->phy); + + return 0; +} + +#ifdef CONFIG_PM_RUNTIME + +static int omap_usb2_runtime_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct omap_usb *phy = platform_get_drvdata(pdev); + + clk_disable(phy->wkupclk); + + return 0; +} + +static int omap_usb2_runtime_resume(struct device *dev) +{ + u32 ret = 0; + struct platform_device *pdev = to_platform_device(dev); + struct omap_usb *phy = platform_get_drvdata(pdev); + + ret = clk_enable(phy->wkupclk); + if (ret < 0) + dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret); + + return ret; +} + +static const struct dev_pm_ops omap_usb2_pm_ops = { + SET_RUNTIME_PM_OPS(omap_usb2_runtime_suspend, omap_usb2_runtime_resume, + NULL) +}; + +#define DEV_PM_OPS (&omap_usb2_pm_ops) +#else +#define DEV_PM_OPS NULL +#endif + +#ifdef CONFIG_OF +static const struct of_device_id omap_usb2_id_table[] = { + { .compatible = "ti,omap-usb2" }, + {} +}; +MODULE_DEVICE_TABLE(of, omap_usb2_id_table); +#endif + +static struct platform_driver omap_usb2_driver = { + .probe = omap_usb2_probe, + .remove = __devexit_p(omap_usb2_remove), + .driver = { + .name = "omap-usb2", + .owner = THIS_MODULE, + .pm = DEV_PM_OPS, + .of_match_table = of_match_ptr(omap_usb2_id_table), + }, +}; + +module_platform_driver(omap_usb2_driver); + +MODULE_ALIAS("platform: omap_usb2"); +MODULE_AUTHOR("Texas Instruments Inc."); +MODULE_DESCRIPTION("OMAP USB2 phy driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/usb/phy/tegra_usb_phy.c b/drivers/usb/phy/tegra_usb_phy.c new file mode 100644 index 000000000000..4739903245e8 --- /dev/null +++ b/drivers/usb/phy/tegra_usb_phy.c @@ -0,0 +1,839 @@ +/* + * Copyright (C) 2010 Google, Inc. + * + * Author: + * Erik Gilling <konkers@google.com> + * Benoit Goby <benoit@android.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/resource.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/err.h> +#include <linux/export.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/gpio.h> +#include <linux/of_gpio.h> +#include <linux/usb/otg.h> +#include <linux/usb/ulpi.h> +#include <asm/mach-types.h> +#include <mach/gpio-tegra.h> +#include <linux/usb/tegra_usb_phy.h> +#include <mach/iomap.h> + +#define ULPI_VIEWPORT 0x170 + +#define USB_PORTSC1 0x184 +#define USB_PORTSC1_PTS(x) (((x) & 0x3) << 30) +#define USB_PORTSC1_PSPD(x) (((x) & 0x3) << 26) +#define USB_PORTSC1_PHCD (1 << 23) +#define USB_PORTSC1_WKOC (1 << 22) +#define USB_PORTSC1_WKDS (1 << 21) +#define USB_PORTSC1_WKCN (1 << 20) +#define USB_PORTSC1_PTC(x) (((x) & 0xf) << 16) +#define USB_PORTSC1_PP (1 << 12) +#define USB_PORTSC1_SUSP (1 << 7) +#define USB_PORTSC1_PE (1 << 2) +#define USB_PORTSC1_CCS (1 << 0) + +#define USB_SUSP_CTRL 0x400 +#define USB_WAKE_ON_CNNT_EN_DEV (1 << 3) +#define USB_WAKE_ON_DISCON_EN_DEV (1 << 4) +#define USB_SUSP_CLR (1 << 5) +#define USB_PHY_CLK_VALID (1 << 7) +#define UTMIP_RESET (1 << 11) +#define UHSIC_RESET (1 << 11) +#define UTMIP_PHY_ENABLE (1 << 12) +#define ULPI_PHY_ENABLE (1 << 13) +#define USB_SUSP_SET (1 << 14) +#define USB_WAKEUP_DEBOUNCE_COUNT(x) (((x) & 0x7) << 16) + +#define USB1_LEGACY_CTRL 0x410 +#define USB1_NO_LEGACY_MODE (1 << 0) +#define USB1_VBUS_SENSE_CTL_MASK (3 << 1) +#define USB1_VBUS_SENSE_CTL_VBUS_WAKEUP (0 << 1) +#define USB1_VBUS_SENSE_CTL_AB_SESS_VLD_OR_VBUS_WAKEUP \ + (1 << 1) +#define USB1_VBUS_SENSE_CTL_AB_SESS_VLD (2 << 1) +#define USB1_VBUS_SENSE_CTL_A_SESS_VLD (3 << 1) + +#define ULPI_TIMING_CTRL_0 0x424 +#define ULPI_OUTPUT_PINMUX_BYP (1 << 10) +#define ULPI_CLKOUT_PINMUX_BYP (1 << 11) + +#define ULPI_TIMING_CTRL_1 0x428 +#define ULPI_DATA_TRIMMER_LOAD (1 << 0) +#define ULPI_DATA_TRIMMER_SEL(x) (((x) & 0x7) << 1) +#define ULPI_STPDIRNXT_TRIMMER_LOAD (1 << 16) +#define ULPI_STPDIRNXT_TRIMMER_SEL(x) (((x) & 0x7) << 17) +#define ULPI_DIR_TRIMMER_LOAD (1 << 24) +#define ULPI_DIR_TRIMMER_SEL(x) (((x) & 0x7) << 25) + +#define UTMIP_PLL_CFG1 0x804 +#define UTMIP_XTAL_FREQ_COUNT(x) (((x) & 0xfff) << 0) +#define UTMIP_PLLU_ENABLE_DLY_COUNT(x) (((x) & 0x1f) << 27) + +#define UTMIP_XCVR_CFG0 0x808 +#define UTMIP_XCVR_SETUP(x) (((x) & 0xf) << 0) +#define UTMIP_XCVR_LSRSLEW(x) (((x) & 0x3) << 8) +#define UTMIP_XCVR_LSFSLEW(x) (((x) & 0x3) << 10) +#define UTMIP_FORCE_PD_POWERDOWN (1 << 14) +#define UTMIP_FORCE_PD2_POWERDOWN (1 << 16) +#define UTMIP_FORCE_PDZI_POWERDOWN (1 << 18) +#define UTMIP_XCVR_HSSLEW_MSB(x) (((x) & 0x7f) << 25) + +#define UTMIP_BIAS_CFG0 0x80c +#define UTMIP_OTGPD (1 << 11) +#define UTMIP_BIASPD (1 << 10) + +#define UTMIP_HSRX_CFG0 0x810 +#define UTMIP_ELASTIC_LIMIT(x) (((x) & 0x1f) << 10) +#define UTMIP_IDLE_WAIT(x) (((x) & 0x1f) << 15) + +#define UTMIP_HSRX_CFG1 0x814 +#define UTMIP_HS_SYNC_START_DLY(x) (((x) & 0x1f) << 1) + +#define UTMIP_TX_CFG0 0x820 +#define UTMIP_FS_PREABMLE_J (1 << 19) +#define UTMIP_HS_DISCON_DISABLE (1 << 8) + +#define UTMIP_MISC_CFG0 0x824 +#define UTMIP_DPDM_OBSERVE (1 << 26) +#define UTMIP_DPDM_OBSERVE_SEL(x) (((x) & 0xf) << 27) +#define UTMIP_DPDM_OBSERVE_SEL_FS_J UTMIP_DPDM_OBSERVE_SEL(0xf) +#define UTMIP_DPDM_OBSERVE_SEL_FS_K UTMIP_DPDM_OBSERVE_SEL(0xe) +#define UTMIP_DPDM_OBSERVE_SEL_FS_SE1 UTMIP_DPDM_OBSERVE_SEL(0xd) +#define UTMIP_DPDM_OBSERVE_SEL_FS_SE0 UTMIP_DPDM_OBSERVE_SEL(0xc) +#define UTMIP_SUSPEND_EXIT_ON_EDGE (1 << 22) + +#define UTMIP_MISC_CFG1 0x828 +#define UTMIP_PLL_ACTIVE_DLY_COUNT(x) (((x) & 0x1f) << 18) +#define UTMIP_PLLU_STABLE_COUNT(x) (((x) & 0xfff) << 6) + +#define UTMIP_DEBOUNCE_CFG0 0x82c +#define UTMIP_BIAS_DEBOUNCE_A(x) (((x) & 0xffff) << 0) + +#define UTMIP_BAT_CHRG_CFG0 0x830 +#define UTMIP_PD_CHRG (1 << 0) + +#define UTMIP_SPARE_CFG0 0x834 +#define FUSE_SETUP_SEL (1 << 3) + +#define UTMIP_XCVR_CFG1 0x838 +#define UTMIP_FORCE_PDDISC_POWERDOWN (1 << 0) +#define UTMIP_FORCE_PDCHRP_POWERDOWN (1 << 2) +#define UTMIP_FORCE_PDDR_POWERDOWN (1 << 4) +#define UTMIP_XCVR_TERM_RANGE_ADJ(x) (((x) & 0xf) << 18) + +#define UTMIP_BIAS_CFG1 0x83c +#define UTMIP_BIAS_PDTRK_COUNT(x) (((x) & 0x1f) << 3) + +static DEFINE_SPINLOCK(utmip_pad_lock); +static int utmip_pad_count; + +struct tegra_xtal_freq { + int freq; + u8 enable_delay; + u8 stable_count; + u8 active_delay; + u8 xtal_freq_count; + u16 debounce; +}; + +static const struct tegra_xtal_freq tegra_freq_table[] = { + { + .freq = 12000000, + .enable_delay = 0x02, + .stable_count = 0x2F, + .active_delay = 0x04, + .xtal_freq_count = 0x76, + .debounce = 0x7530, + }, + { + .freq = 13000000, + .enable_delay = 0x02, + .stable_count = 0x33, + .active_delay = 0x05, + .xtal_freq_count = 0x7F, + .debounce = 0x7EF4, + }, + { + .freq = 19200000, + .enable_delay = 0x03, + .stable_count = 0x4B, + .active_delay = 0x06, + .xtal_freq_count = 0xBB, + .debounce = 0xBB80, + }, + { + .freq = 26000000, + .enable_delay = 0x04, + .stable_count = 0x66, + .active_delay = 0x09, + .xtal_freq_count = 0xFE, + .debounce = 0xFDE8, + }, +}; + +static struct tegra_utmip_config utmip_default[] = { + [0] = { + .hssync_start_delay = 9, + .idle_wait_delay = 17, + .elastic_limit = 16, + .term_range_adj = 6, + .xcvr_setup = 9, + .xcvr_lsfslew = 1, + .xcvr_lsrslew = 1, + }, + [2] = { + .hssync_start_delay = 9, + .idle_wait_delay = 17, + .elastic_limit = 16, + .term_range_adj = 6, + .xcvr_setup = 9, + .xcvr_lsfslew = 2, + .xcvr_lsrslew = 2, + }, +}; + +static inline bool phy_is_ulpi(struct tegra_usb_phy *phy) +{ + return (phy->instance == 1); +} + +static int utmip_pad_open(struct tegra_usb_phy *phy) +{ + phy->pad_clk = clk_get_sys("utmip-pad", NULL); + if (IS_ERR(phy->pad_clk)) { + pr_err("%s: can't get utmip pad clock\n", __func__); + return PTR_ERR(phy->pad_clk); + } + + if (phy->instance == 0) { + phy->pad_regs = phy->regs; + } else { + phy->pad_regs = ioremap(TEGRA_USB_BASE, TEGRA_USB_SIZE); + if (!phy->pad_regs) { + pr_err("%s: can't remap usb registers\n", __func__); + clk_put(phy->pad_clk); + return -ENOMEM; + } + } + return 0; +} + +static void utmip_pad_close(struct tegra_usb_phy *phy) +{ + if (phy->instance != 0) + iounmap(phy->pad_regs); + clk_put(phy->pad_clk); +} + +static void utmip_pad_power_on(struct tegra_usb_phy *phy) +{ + unsigned long val, flags; + void __iomem *base = phy->pad_regs; + + clk_prepare_enable(phy->pad_clk); + + spin_lock_irqsave(&utmip_pad_lock, flags); + + if (utmip_pad_count++ == 0) { + val = readl(base + UTMIP_BIAS_CFG0); + val &= ~(UTMIP_OTGPD | UTMIP_BIASPD); + writel(val, base + UTMIP_BIAS_CFG0); + } + + spin_unlock_irqrestore(&utmip_pad_lock, flags); + + clk_disable_unprepare(phy->pad_clk); +} + +static int utmip_pad_power_off(struct tegra_usb_phy *phy) +{ + unsigned long val, flags; + void __iomem *base = phy->pad_regs; + + if (!utmip_pad_count) { + pr_err("%s: utmip pad already powered off\n", __func__); + return -EINVAL; + } + + clk_prepare_enable(phy->pad_clk); + + spin_lock_irqsave(&utmip_pad_lock, flags); + + if (--utmip_pad_count == 0) { + val = readl(base + UTMIP_BIAS_CFG0); + val |= UTMIP_OTGPD | UTMIP_BIASPD; + writel(val, base + UTMIP_BIAS_CFG0); + } + + spin_unlock_irqrestore(&utmip_pad_lock, flags); + + clk_disable_unprepare(phy->pad_clk); + + return 0; +} + +static int utmi_wait_register(void __iomem *reg, u32 mask, u32 result) +{ + unsigned long timeout = 2000; + do { + if ((readl(reg) & mask) == result) + return 0; + udelay(1); + timeout--; + } while (timeout); + return -1; +} + +static void utmi_phy_clk_disable(struct tegra_usb_phy *phy) +{ + unsigned long val; + void __iomem *base = phy->regs; + + if (phy->instance == 0) { + val = readl(base + USB_SUSP_CTRL); + val |= USB_SUSP_SET; + writel(val, base + USB_SUSP_CTRL); + + udelay(10); + + val = readl(base + USB_SUSP_CTRL); + val &= ~USB_SUSP_SET; + writel(val, base + USB_SUSP_CTRL); + } + + if (phy->instance == 2) { + val = readl(base + USB_PORTSC1); + val |= USB_PORTSC1_PHCD; + writel(val, base + USB_PORTSC1); + } + + if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID, 0) < 0) + pr_err("%s: timeout waiting for phy to stabilize\n", __func__); +} + +static void utmi_phy_clk_enable(struct tegra_usb_phy *phy) +{ + unsigned long val; + void __iomem *base = phy->regs; + + if (phy->instance == 0) { + val = readl(base + USB_SUSP_CTRL); + val |= USB_SUSP_CLR; + writel(val, base + USB_SUSP_CTRL); + + udelay(10); + + val = readl(base + USB_SUSP_CTRL); + val &= ~USB_SUSP_CLR; + writel(val, base + USB_SUSP_CTRL); + } + + if (phy->instance == 2) { + val = readl(base + USB_PORTSC1); + val &= ~USB_PORTSC1_PHCD; + writel(val, base + USB_PORTSC1); + } + + if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID, + USB_PHY_CLK_VALID)) + pr_err("%s: timeout waiting for phy to stabilize\n", __func__); +} + +static int utmi_phy_power_on(struct tegra_usb_phy *phy) +{ + unsigned long val; + void __iomem *base = phy->regs; + struct tegra_utmip_config *config = phy->config; + + val = readl(base + USB_SUSP_CTRL); + val |= UTMIP_RESET; + writel(val, base + USB_SUSP_CTRL); + + if (phy->instance == 0) { + val = readl(base + USB1_LEGACY_CTRL); + val |= USB1_NO_LEGACY_MODE; + writel(val, base + USB1_LEGACY_CTRL); + } + + val = readl(base + UTMIP_TX_CFG0); + val &= ~UTMIP_FS_PREABMLE_J; + writel(val, base + UTMIP_TX_CFG0); + + val = readl(base + UTMIP_HSRX_CFG0); + val &= ~(UTMIP_IDLE_WAIT(~0) | UTMIP_ELASTIC_LIMIT(~0)); + val |= UTMIP_IDLE_WAIT(config->idle_wait_delay); + val |= UTMIP_ELASTIC_LIMIT(config->elastic_limit); + writel(val, base + UTMIP_HSRX_CFG0); + + val = readl(base + UTMIP_HSRX_CFG1); + val &= ~UTMIP_HS_SYNC_START_DLY(~0); + val |= UTMIP_HS_SYNC_START_DLY(config->hssync_start_delay); + writel(val, base + UTMIP_HSRX_CFG1); + + val = readl(base + UTMIP_DEBOUNCE_CFG0); + val &= ~UTMIP_BIAS_DEBOUNCE_A(~0); + val |= UTMIP_BIAS_DEBOUNCE_A(phy->freq->debounce); + writel(val, base + UTMIP_DEBOUNCE_CFG0); + + val = readl(base + UTMIP_MISC_CFG0); + val &= ~UTMIP_SUSPEND_EXIT_ON_EDGE; + writel(val, base + UTMIP_MISC_CFG0); + + val = readl(base + UTMIP_MISC_CFG1); + val &= ~(UTMIP_PLL_ACTIVE_DLY_COUNT(~0) | UTMIP_PLLU_STABLE_COUNT(~0)); + val |= UTMIP_PLL_ACTIVE_DLY_COUNT(phy->freq->active_delay) | + UTMIP_PLLU_STABLE_COUNT(phy->freq->stable_count); + writel(val, base + UTMIP_MISC_CFG1); + + val = readl(base + UTMIP_PLL_CFG1); + val &= ~(UTMIP_XTAL_FREQ_COUNT(~0) | UTMIP_PLLU_ENABLE_DLY_COUNT(~0)); + val |= UTMIP_XTAL_FREQ_COUNT(phy->freq->xtal_freq_count) | + UTMIP_PLLU_ENABLE_DLY_COUNT(phy->freq->enable_delay); + writel(val, base + UTMIP_PLL_CFG1); + + if (phy->mode == TEGRA_USB_PHY_MODE_DEVICE) { + val = readl(base + USB_SUSP_CTRL); + val &= ~(USB_WAKE_ON_CNNT_EN_DEV | USB_WAKE_ON_DISCON_EN_DEV); + writel(val, base + USB_SUSP_CTRL); + } + + utmip_pad_power_on(phy); + + val = readl(base + UTMIP_XCVR_CFG0); + val &= ~(UTMIP_FORCE_PD_POWERDOWN | UTMIP_FORCE_PD2_POWERDOWN | + UTMIP_FORCE_PDZI_POWERDOWN | UTMIP_XCVR_SETUP(~0) | + UTMIP_XCVR_LSFSLEW(~0) | UTMIP_XCVR_LSRSLEW(~0) | + UTMIP_XCVR_HSSLEW_MSB(~0)); + val |= UTMIP_XCVR_SETUP(config->xcvr_setup); + val |= UTMIP_XCVR_LSFSLEW(config->xcvr_lsfslew); + val |= UTMIP_XCVR_LSRSLEW(config->xcvr_lsrslew); + writel(val, base + UTMIP_XCVR_CFG0); + + val = readl(base + UTMIP_XCVR_CFG1); + val &= ~(UTMIP_FORCE_PDDISC_POWERDOWN | UTMIP_FORCE_PDCHRP_POWERDOWN | + UTMIP_FORCE_PDDR_POWERDOWN | UTMIP_XCVR_TERM_RANGE_ADJ(~0)); + val |= UTMIP_XCVR_TERM_RANGE_ADJ(config->term_range_adj); + writel(val, base + UTMIP_XCVR_CFG1); + + val = readl(base + UTMIP_BAT_CHRG_CFG0); + val &= ~UTMIP_PD_CHRG; + writel(val, base + UTMIP_BAT_CHRG_CFG0); + + val = readl(base + UTMIP_BIAS_CFG1); + val &= ~UTMIP_BIAS_PDTRK_COUNT(~0); + val |= UTMIP_BIAS_PDTRK_COUNT(0x5); + writel(val, base + UTMIP_BIAS_CFG1); + + if (phy->instance == 0) { + val = readl(base + UTMIP_SPARE_CFG0); + if (phy->mode == TEGRA_USB_PHY_MODE_DEVICE) + val &= ~FUSE_SETUP_SEL; + else + val |= FUSE_SETUP_SEL; + writel(val, base + UTMIP_SPARE_CFG0); + } + + if (phy->instance == 2) { + val = readl(base + USB_SUSP_CTRL); + val |= UTMIP_PHY_ENABLE; + writel(val, base + USB_SUSP_CTRL); + } + + val = readl(base + USB_SUSP_CTRL); + val &= ~UTMIP_RESET; + writel(val, base + USB_SUSP_CTRL); + + if (phy->instance == 0) { + val = readl(base + USB1_LEGACY_CTRL); + val &= ~USB1_VBUS_SENSE_CTL_MASK; + val |= USB1_VBUS_SENSE_CTL_A_SESS_VLD; + writel(val, base + USB1_LEGACY_CTRL); + + val = readl(base + USB_SUSP_CTRL); + val &= ~USB_SUSP_SET; + writel(val, base + USB_SUSP_CTRL); + } + + utmi_phy_clk_enable(phy); + + if (phy->instance == 2) { + val = readl(base + USB_PORTSC1); + val &= ~USB_PORTSC1_PTS(~0); + writel(val, base + USB_PORTSC1); + } + + return 0; +} + +static int utmi_phy_power_off(struct tegra_usb_phy *phy) +{ + unsigned long val; + void __iomem *base = phy->regs; + + utmi_phy_clk_disable(phy); + + if (phy->mode == TEGRA_USB_PHY_MODE_DEVICE) { + val = readl(base + USB_SUSP_CTRL); + val &= ~USB_WAKEUP_DEBOUNCE_COUNT(~0); + val |= USB_WAKE_ON_CNNT_EN_DEV | USB_WAKEUP_DEBOUNCE_COUNT(5); + writel(val, base + USB_SUSP_CTRL); + } + + val = readl(base + USB_SUSP_CTRL); + val |= UTMIP_RESET; + writel(val, base + USB_SUSP_CTRL); + + val = readl(base + UTMIP_BAT_CHRG_CFG0); + val |= UTMIP_PD_CHRG; + writel(val, base + UTMIP_BAT_CHRG_CFG0); + + val = readl(base + UTMIP_XCVR_CFG0); + val |= UTMIP_FORCE_PD_POWERDOWN | UTMIP_FORCE_PD2_POWERDOWN | + UTMIP_FORCE_PDZI_POWERDOWN; + writel(val, base + UTMIP_XCVR_CFG0); + + val = readl(base + UTMIP_XCVR_CFG1); + val |= UTMIP_FORCE_PDDISC_POWERDOWN | UTMIP_FORCE_PDCHRP_POWERDOWN | + UTMIP_FORCE_PDDR_POWERDOWN; + writel(val, base + UTMIP_XCVR_CFG1); + + return utmip_pad_power_off(phy); +} + +static void utmi_phy_preresume(struct tegra_usb_phy *phy) +{ + unsigned long val; + void __iomem *base = phy->regs; + + val = readl(base + UTMIP_TX_CFG0); + val |= UTMIP_HS_DISCON_DISABLE; + writel(val, base + UTMIP_TX_CFG0); +} + +static void utmi_phy_postresume(struct tegra_usb_phy *phy) +{ + unsigned long val; + void __iomem *base = phy->regs; + + val = readl(base + UTMIP_TX_CFG0); + val &= ~UTMIP_HS_DISCON_DISABLE; + writel(val, base + UTMIP_TX_CFG0); +} + +static void utmi_phy_restore_start(struct tegra_usb_phy *phy, + enum tegra_usb_phy_port_speed port_speed) +{ + unsigned long val; + void __iomem *base = phy->regs; + + val = readl(base + UTMIP_MISC_CFG0); + val &= ~UTMIP_DPDM_OBSERVE_SEL(~0); + if (port_speed == TEGRA_USB_PHY_PORT_SPEED_LOW) + val |= UTMIP_DPDM_OBSERVE_SEL_FS_K; + else + val |= UTMIP_DPDM_OBSERVE_SEL_FS_J; + writel(val, base + UTMIP_MISC_CFG0); + udelay(1); + + val = readl(base + UTMIP_MISC_CFG0); + val |= UTMIP_DPDM_OBSERVE; + writel(val, base + UTMIP_MISC_CFG0); + udelay(10); +} + +static void utmi_phy_restore_end(struct tegra_usb_phy *phy) +{ + unsigned long val; + void __iomem *base = phy->regs; + + val = readl(base + UTMIP_MISC_CFG0); + val &= ~UTMIP_DPDM_OBSERVE; + writel(val, base + UTMIP_MISC_CFG0); + udelay(10); +} + +static int ulpi_phy_power_on(struct tegra_usb_phy *phy) +{ + int ret; + unsigned long val; + void __iomem *base = phy->regs; + struct tegra_ulpi_config *config = phy->config; + + gpio_direction_output(config->reset_gpio, 0); + msleep(5); + gpio_direction_output(config->reset_gpio, 1); + + clk_prepare_enable(phy->clk); + msleep(1); + + val = readl(base + USB_SUSP_CTRL); + val |= UHSIC_RESET; + writel(val, base + USB_SUSP_CTRL); + + val = readl(base + ULPI_TIMING_CTRL_0); + val |= ULPI_OUTPUT_PINMUX_BYP | ULPI_CLKOUT_PINMUX_BYP; + writel(val, base + ULPI_TIMING_CTRL_0); + + val = readl(base + USB_SUSP_CTRL); + val |= ULPI_PHY_ENABLE; + writel(val, base + USB_SUSP_CTRL); + + val = 0; + writel(val, base + ULPI_TIMING_CTRL_1); + + val |= ULPI_DATA_TRIMMER_SEL(4); + val |= ULPI_STPDIRNXT_TRIMMER_SEL(4); + val |= ULPI_DIR_TRIMMER_SEL(4); + writel(val, base + ULPI_TIMING_CTRL_1); + udelay(10); + + val |= ULPI_DATA_TRIMMER_LOAD; + val |= ULPI_STPDIRNXT_TRIMMER_LOAD; + val |= ULPI_DIR_TRIMMER_LOAD; + writel(val, base + ULPI_TIMING_CTRL_1); + + /* Fix VbusInvalid due to floating VBUS */ + ret = usb_phy_io_write(phy->ulpi, 0x40, 0x08); + if (ret) { + pr_err("%s: ulpi write failed\n", __func__); + return ret; + } + + ret = usb_phy_io_write(phy->ulpi, 0x80, 0x0B); + if (ret) { + pr_err("%s: ulpi write failed\n", __func__); + return ret; + } + + val = readl(base + USB_PORTSC1); + val |= USB_PORTSC1_WKOC | USB_PORTSC1_WKDS | USB_PORTSC1_WKCN; + writel(val, base + USB_PORTSC1); + + val = readl(base + USB_SUSP_CTRL); + val |= USB_SUSP_CLR; + writel(val, base + USB_SUSP_CTRL); + udelay(100); + + val = readl(base + USB_SUSP_CTRL); + val &= ~USB_SUSP_CLR; + writel(val, base + USB_SUSP_CTRL); + + return 0; +} + +static int ulpi_phy_power_off(struct tegra_usb_phy *phy) +{ + unsigned long val; + void __iomem *base = phy->regs; + struct tegra_ulpi_config *config = phy->config; + + /* Clear WKCN/WKDS/WKOC wake-on events that can cause the USB + * Controller to immediately bring the ULPI PHY out of low power + */ + val = readl(base + USB_PORTSC1); + val &= ~(USB_PORTSC1_WKOC | USB_PORTSC1_WKDS | USB_PORTSC1_WKCN); + writel(val, base + USB_PORTSC1); + + clk_disable(phy->clk); + return gpio_direction_output(config->reset_gpio, 0); +} + +static int tegra_phy_init(struct usb_phy *x) +{ + struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy); + struct tegra_ulpi_config *ulpi_config; + int err; + + if (phy_is_ulpi(phy)) { + ulpi_config = phy->config; + phy->clk = clk_get_sys(NULL, ulpi_config->clk); + if (IS_ERR(phy->clk)) { + pr_err("%s: can't get ulpi clock\n", __func__); + err = -ENXIO; + goto err1; + } + if (!gpio_is_valid(ulpi_config->reset_gpio)) + ulpi_config->reset_gpio = + of_get_named_gpio(phy->dev->of_node, + "nvidia,phy-reset-gpio", 0); + if (!gpio_is_valid(ulpi_config->reset_gpio)) { + pr_err("%s: invalid reset gpio: %d\n", __func__, + ulpi_config->reset_gpio); + err = -EINVAL; + goto err1; + } + gpio_request(ulpi_config->reset_gpio, "ulpi_phy_reset_b"); + gpio_direction_output(ulpi_config->reset_gpio, 0); + phy->ulpi = otg_ulpi_create(&ulpi_viewport_access_ops, 0); + phy->ulpi->io_priv = phy->regs + ULPI_VIEWPORT; + } else { + err = utmip_pad_open(phy); + if (err < 0) + goto err1; + } + return 0; +err1: + clk_disable_unprepare(phy->pll_u); + clk_put(phy->pll_u); + return err; +} + +static void tegra_usb_phy_close(struct usb_phy *x) +{ + struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy); + + if (phy_is_ulpi(phy)) + clk_put(phy->clk); + else + utmip_pad_close(phy); + clk_disable_unprepare(phy->pll_u); + clk_put(phy->pll_u); + kfree(phy); +} + +static int tegra_usb_phy_power_on(struct tegra_usb_phy *phy) +{ + if (phy_is_ulpi(phy)) + return ulpi_phy_power_on(phy); + else + return utmi_phy_power_on(phy); +} + +static int tegra_usb_phy_power_off(struct tegra_usb_phy *phy) +{ + if (phy_is_ulpi(phy)) + return ulpi_phy_power_off(phy); + else + return utmi_phy_power_off(phy); +} + +static int tegra_usb_phy_suspend(struct usb_phy *x, int suspend) +{ + struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy); + if (suspend) + return tegra_usb_phy_power_off(phy); + else + return tegra_usb_phy_power_on(phy); +} + +struct tegra_usb_phy *tegra_usb_phy_open(struct device *dev, int instance, + void __iomem *regs, void *config, enum tegra_usb_phy_mode phy_mode) +{ + struct tegra_usb_phy *phy; + unsigned long parent_rate; + int i; + int err; + + phy = kmalloc(sizeof(struct tegra_usb_phy), GFP_KERNEL); + if (!phy) + return ERR_PTR(-ENOMEM); + + phy->instance = instance; + phy->regs = regs; + phy->config = config; + phy->mode = phy_mode; + phy->dev = dev; + + if (!phy->config) { + if (phy_is_ulpi(phy)) { + pr_err("%s: ulpi phy configuration missing", __func__); + err = -EINVAL; + goto err0; + } else { + phy->config = &utmip_default[instance]; + } + } + + phy->pll_u = clk_get_sys(NULL, "pll_u"); + if (IS_ERR(phy->pll_u)) { + pr_err("Can't get pll_u clock\n"); + err = PTR_ERR(phy->pll_u); + goto err0; + } + clk_prepare_enable(phy->pll_u); + + parent_rate = clk_get_rate(clk_get_parent(phy->pll_u)); + for (i = 0; i < ARRAY_SIZE(tegra_freq_table); i++) { + if (tegra_freq_table[i].freq == parent_rate) { + phy->freq = &tegra_freq_table[i]; + break; + } + } + if (!phy->freq) { + pr_err("invalid pll_u parent rate %ld\n", parent_rate); + err = -EINVAL; + goto err1; + } + + phy->u_phy.init = tegra_phy_init; + phy->u_phy.shutdown = tegra_usb_phy_close; + phy->u_phy.set_suspend = tegra_usb_phy_suspend; + + return phy; + +err1: + clk_disable_unprepare(phy->pll_u); + clk_put(phy->pll_u); +err0: + kfree(phy); + return ERR_PTR(err); +} +EXPORT_SYMBOL_GPL(tegra_usb_phy_open); + +void tegra_usb_phy_preresume(struct tegra_usb_phy *phy) +{ + if (!phy_is_ulpi(phy)) + utmi_phy_preresume(phy); +} +EXPORT_SYMBOL_GPL(tegra_usb_phy_preresume); + +void tegra_usb_phy_postresume(struct tegra_usb_phy *phy) +{ + if (!phy_is_ulpi(phy)) + utmi_phy_postresume(phy); +} +EXPORT_SYMBOL_GPL(tegra_usb_phy_postresume); + +void tegra_ehci_phy_restore_start(struct tegra_usb_phy *phy, + enum tegra_usb_phy_port_speed port_speed) +{ + if (!phy_is_ulpi(phy)) + utmi_phy_restore_start(phy, port_speed); +} +EXPORT_SYMBOL_GPL(tegra_ehci_phy_restore_start); + +void tegra_ehci_phy_restore_end(struct tegra_usb_phy *phy) +{ + if (!phy_is_ulpi(phy)) + utmi_phy_restore_end(phy); +} +EXPORT_SYMBOL_GPL(tegra_ehci_phy_restore_end); + +void tegra_usb_phy_clk_disable(struct tegra_usb_phy *phy) +{ + if (!phy_is_ulpi(phy)) + utmi_phy_clk_disable(phy); +} +EXPORT_SYMBOL_GPL(tegra_usb_phy_clk_disable); + +void tegra_usb_phy_clk_enable(struct tegra_usb_phy *phy) +{ + if (!phy_is_ulpi(phy)) + utmi_phy_clk_enable(phy); +} +EXPORT_SYMBOL_GPL(tegra_usb_phy_clk_enable); diff --git a/drivers/usb/renesas_usbhs/common.c b/drivers/usb/renesas_usbhs/common.c index 681da06170c2..072edc1cc55f 100644 --- a/drivers/usb/renesas_usbhs/common.c +++ b/drivers/usb/renesas_usbhs/common.c @@ -432,17 +432,16 @@ static int usbhs_probe(struct platform_device *pdev) } /* usb private data */ - priv = kzalloc(sizeof(*priv), GFP_KERNEL); + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); if (!priv) { dev_err(&pdev->dev, "Could not allocate priv\n"); return -ENOMEM; } - priv->base = ioremap_nocache(res->start, resource_size(res)); + priv->base = devm_request_and_ioremap(&pdev->dev, res); if (!priv->base) { dev_err(&pdev->dev, "ioremap error.\n"); - ret = -ENOMEM; - goto probe_end_kfree; + return -ENOMEM; } /* @@ -485,7 +484,7 @@ static int usbhs_probe(struct platform_device *pdev) /* call pipe and module init */ ret = usbhs_pipe_probe(priv); if (ret < 0) - goto probe_end_iounmap; + return ret; ret = usbhs_fifo_probe(priv); if (ret < 0) @@ -546,10 +545,6 @@ probe_end_fifo_exit: usbhs_fifo_remove(priv); probe_end_pipe_exit: usbhs_pipe_remove(priv); -probe_end_iounmap: - iounmap(priv->base); -probe_end_kfree: - kfree(priv); dev_info(&pdev->dev, "probe failed\n"); @@ -576,8 +571,6 @@ static int __devexit usbhs_remove(struct platform_device *pdev) usbhs_mod_remove(priv); usbhs_fifo_remove(priv); usbhs_pipe_remove(priv); - iounmap(priv->base); - kfree(priv); return 0; } diff --git a/drivers/usb/renesas_usbhs/mod.c b/drivers/usb/renesas_usbhs/mod.c index 82a628f96c03..35c5208f3249 100644 --- a/drivers/usb/renesas_usbhs/mod.c +++ b/drivers/usb/renesas_usbhs/mod.c @@ -209,14 +209,18 @@ int usbhs_status_get_ctrl_stage(struct usbhs_irq_state *irq_state) return (int)irq_state->intsts0 & CTSQ_MASK; } -static void usbhs_status_get_each_irq(struct usbhs_priv *priv, - struct usbhs_irq_state *state) +static int usbhs_status_get_each_irq(struct usbhs_priv *priv, + struct usbhs_irq_state *state) { struct usbhs_mod *mod = usbhs_mod_get_current(priv); + u16 intenb0, intenb1; state->intsts0 = usbhs_read(priv, INTSTS0); state->intsts1 = usbhs_read(priv, INTSTS1); + intenb0 = usbhs_read(priv, INTENB0); + intenb1 = usbhs_read(priv, INTENB1); + /* mask */ if (mod) { state->brdysts = usbhs_read(priv, BRDYSTS); @@ -226,6 +230,20 @@ static void usbhs_status_get_each_irq(struct usbhs_priv *priv, state->bempsts &= mod->irq_bempsts; state->brdysts &= mod->irq_brdysts; } + + /* + * Check whether the irq enable registers and the irq status are set + * when IRQF_SHARED is set. + */ + if (priv->irqflags & IRQF_SHARED) { + if (!(intenb0 & state->intsts0) && + !(intenb1 & state->intsts1) && + !(state->bempsts) && + !(state->brdysts)) + return -EIO; + } + + return 0; } /* @@ -238,7 +256,8 @@ static irqreturn_t usbhs_interrupt(int irq, void *data) struct usbhs_priv *priv = data; struct usbhs_irq_state irq_state; - usbhs_status_get_each_irq(priv, &irq_state); + if (usbhs_status_get_each_irq(priv, &irq_state) < 0) + return IRQ_NONE; /* * clear interrupt diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index 325d2910f9f9..76f462241738 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -42,11 +42,6 @@ config USB_SERIAL_CONSOLE If unsure, say N. -config USB_EZUSB - bool "Functions for loading firmware on EZUSB chips" - help - Say Y here if you need EZUSB device support. - config USB_SERIAL_GENERIC bool "USB Generic Serial Driver" help @@ -94,7 +89,7 @@ config USB_SERIAL_CH341 config USB_SERIAL_WHITEHEAT tristate "USB ConnectTech WhiteHEAT Serial Driver" - select USB_EZUSB + select USB_EZUSB_FX2 help Say Y here if you want to use a ConnectTech WhiteHEAT 4 port USB to serial converter device. @@ -281,7 +276,7 @@ config USB_SERIAL_IUU config USB_SERIAL_KEYSPAN_PDA tristate "USB Keyspan PDA Single Port Serial Driver" - select USB_EZUSB + select USB_EZUSB_FX2 help Say Y here if you want to use a Keyspan PDA single port USB to serial converter device. This driver makes use of firmware @@ -292,7 +287,7 @@ config USB_SERIAL_KEYSPAN_PDA config USB_SERIAL_KEYSPAN tristate "USB Keyspan USA-xxx Serial Driver" - select USB_EZUSB + select USB_EZUSB_FX2 ---help--- Say Y here if you want to use Keyspan USB to serial converter devices. This driver makes use of Keyspan's official firmware @@ -596,7 +591,7 @@ config USB_SERIAL_CYBERJACK config USB_SERIAL_XIRCOM tristate "USB Xircom / Entregra Single Port Serial Driver" - select USB_EZUSB + select USB_EZUSB_FX2 help Say Y here if you want to use a Xircom or Entregra single port USB to serial converter device. This driver makes use of firmware @@ -660,6 +655,14 @@ config USB_SERIAL_ZIO To compile this driver as a module, choose M here: the module will be called zio. +config USB_SERIAL_ZTE + tristate "ZTE USB serial driver" + help + Say Y here if you want to use a ZTE USB to serial device. + + To compile this driver as a module, choose M here: the + module will be called zte. + config USB_SERIAL_SSU100 tristate "USB Quatech SSU-100 Single Port Serial Driver" help diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile index 1dc483a8bfc7..3b3e7308d476 100644 --- a/drivers/usb/serial/Makefile +++ b/drivers/usb/serial/Makefile @@ -9,7 +9,6 @@ obj-$(CONFIG_USB_SERIAL) += usbserial.o usbserial-y := usb-serial.o generic.o bus.o usbserial-$(CONFIG_USB_SERIAL_CONSOLE) += console.o -usbserial-$(CONFIG_USB_EZUSB) += ezusb.o obj-$(CONFIG_USB_SERIAL_AIRCABLE) += aircable.o obj-$(CONFIG_USB_SERIAL_ARK3116) += ark3116.o @@ -63,3 +62,4 @@ obj-$(CONFIG_USB_SERIAL_WHITEHEAT) += whiteheat.o obj-$(CONFIG_USB_SERIAL_XIRCOM) += keyspan_pda.o obj-$(CONFIG_USB_SERIAL_VIVOPAY_SERIAL) += vivopay-serial.o obj-$(CONFIG_USB_SERIAL_ZIO) += zio.o +obj-$(CONFIG_USB_SERIAL_ZTE) += zte_ev.o diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c index d634e6635632..54e1bb6372e7 100644 --- a/drivers/usb/serial/aircable.c +++ b/drivers/usb/serial/aircable.c @@ -52,8 +52,6 @@ #include <linux/usb.h> #include <linux/usb/serial.h> -static bool debug; - /* Vendor and Product ID */ #define AIRCABLE_VID 0x16CA #define AIRCABLE_USB_PID 0x1502 @@ -196,6 +194,3 @@ MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_VERSION(DRIVER_VERSION); MODULE_LICENSE("GPL"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c index 3b98fb733362..cf2522c397d3 100644 --- a/drivers/usb/serial/ark3116.c +++ b/drivers/usb/serial/ark3116.c @@ -37,7 +37,6 @@ #include <linux/mutex.h> #include <linux/spinlock.h> -static bool debug; /* * Version information */ @@ -650,8 +649,7 @@ static void ark3116_read_int_callback(struct urb *urb) /* * Not sure what this data meant... */ - usb_serial_debug_data(debug, &port->dev, - __func__, + usb_serial_debug_data(&port->dev, __func__, urb->actual_length, urb->transfer_buffer); break; @@ -750,9 +748,6 @@ MODULE_LICENSE("GPL"); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Enable debug"); - /* * The following describes what I learned from studying the old * ark3116.c driver, disassembling the windows driver, and some lucky diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c index a46df73ee96e..99449424193f 100644 --- a/drivers/usb/serial/belkin_sa.c +++ b/drivers/usb/serial/belkin_sa.c @@ -37,8 +37,6 @@ #include <linux/usb/serial.h> #include "belkin_sa.h" -static bool debug; - /* * Version Information */ @@ -206,8 +204,7 @@ static void belkin_sa_read_int_callback(struct urb *urb) goto exit; } - usb_serial_debug_data(debug, &port->dev, __func__, - urb->actual_length, data); + usb_serial_debug_data(&port->dev, __func__, urb->actual_length, data); /* Handle known interrupt data */ /* ignore data[0] and data[1] */ @@ -515,6 +512,3 @@ MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_VERSION(DRIVER_VERSION); MODULE_LICENSE("GPL"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index cabd1b15ddce..e9c7046ae355 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -70,8 +70,6 @@ #define CH341_NBREAK_BITS_REG2 0x40 -static bool debug; - static const struct usb_device_id id_table[] = { { USB_DEVICE(0x4348, 0x5523) }, { USB_DEVICE(0x1a86, 0x7523) }, @@ -93,8 +91,9 @@ static int ch341_control_out(struct usb_device *dev, u8 request, u16 value, u16 index) { int r; - dbg("ch341_control_out(%02x,%02x,%04x,%04x)", USB_DIR_OUT|0x40, - (int)request, (int)value, (int)index); + + dev_dbg(&dev->dev, "ch341_control_out(%02x,%02x,%04x,%04x)\n", + USB_DIR_OUT|0x40, (int)request, (int)value, (int)index); r = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), request, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, @@ -108,8 +107,10 @@ static int ch341_control_in(struct usb_device *dev, char *buf, unsigned bufsize) { int r; - dbg("ch341_control_in(%02x,%02x,%04x,%04x,%p,%u)", USB_DIR_IN|0x40, - (int)request, (int)value, (int)index, buf, (int)bufsize); + + dev_dbg(&dev->dev, "ch341_control_in(%02x,%02x,%04x,%04x,%p,%u)\n", + USB_DIR_IN|0x40, (int)request, (int)value, (int)index, buf, + (int)bufsize); r = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), request, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, @@ -320,7 +321,7 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port) if (r) goto out; - dbg("%s - submitting interrupt urb", __func__); + dev_dbg(&port->dev, "%s - submitting interrupt urb", __func__); r = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); if (r) { dev_err(&port->dev, "%s - failed submitting interrupt urb," @@ -390,19 +391,19 @@ static void ch341_break_ctl(struct tty_struct *tty, int break_state) __func__, r); goto out; } - dbg("%s - initial ch341 break register contents - reg1: %x, reg2: %x", - __func__, break_reg[0], break_reg[1]); + dev_dbg(&port->dev, "%s - initial ch341 break register contents - reg1: %x, reg2: %x\n", + __func__, break_reg[0], break_reg[1]); if (break_state != 0) { - dbg("%s - Enter break state requested", __func__); + dev_dbg(&port->dev, "%s - Enter break state requested\n", __func__); break_reg[0] &= ~CH341_NBREAK_BITS_REG1; break_reg[1] &= ~CH341_NBREAK_BITS_REG2; } else { - dbg("%s - Leave break state requested", __func__); + dev_dbg(&port->dev, "%s - Leave break state requested\n", __func__); break_reg[0] |= CH341_NBREAK_BITS_REG1; break_reg[1] |= CH341_NBREAK_BITS_REG2; } - dbg("%s - New ch341 break register contents - reg1: %x, reg2: %x", - __func__, break_reg[0], break_reg[1]); + dev_dbg(&port->dev, "%s - New ch341 break register contents - reg1: %x, reg2: %x\n", + __func__, break_reg[0], break_reg[1]); reg_contents = get_unaligned_le16(break_reg); r = ch341_control_out(port->serial->dev, CH341_REQ_WRITE_REG, ch341_break_reg, reg_contents); @@ -451,16 +452,16 @@ static void ch341_read_int_callback(struct urb *urb) case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", __func__, - urb->status); + dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d\n", + __func__, urb->status); return; default: - dbg("%s - nonzero urb status received: %d", __func__, - urb->status); + dev_dbg(&urb->dev->dev, "%s - nonzero urb status received: %d\n", + __func__, urb->status); goto exit; } - usb_serial_debug_data(debug, &port->dev, __func__, + usb_serial_debug_data(&port->dev, __func__, urb->actual_length, urb->transfer_buffer); if (actual_length >= 4) { @@ -536,15 +537,16 @@ static int ch341_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct usb_serial_port *port = tty->driver_data; - dbg("%s (%d) cmd = 0x%04x", __func__, port->number, cmd); + + dev_dbg(&port->dev, "%s (%d) cmd = 0x%04x\n", __func__, port->number, cmd); switch (cmd) { case TIOCMIWAIT: - dbg("%s (%d) TIOCMIWAIT", __func__, port->number); + dev_dbg(&port->dev, "%s (%d) TIOCMIWAIT\n", __func__, port->number); return wait_modem_info(port, arg); default: - dbg("%s not supported = 0x%04x", __func__, cmd); + dev_dbg(&port->dev, "%s not supported = 0x%04x\n", __func__, cmd); break; } @@ -572,7 +574,7 @@ static int ch341_tiocmget(struct tty_struct *tty) | ((status & CH341_BIT_RI) ? TIOCM_RI : 0) | ((status & CH341_BIT_DCD) ? TIOCM_CD : 0); - dbg("%s - result = %x", __func__, result); + dev_dbg(&port->dev, "%s - result = %x\n", __func__, result); return result; } @@ -617,6 +619,3 @@ static struct usb_serial_driver * const serial_drivers[] = { module_usb_serial_driver(serial_drivers, id_table); MODULE_LICENSE("GPL"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c index 9a564286bfd7..5f3bcd31e204 100644 --- a/drivers/usb/serial/console.c +++ b/drivers/usb/serial/console.c @@ -11,6 +11,8 @@ * */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/kernel.h> #include <linux/init.h> #include <linux/slab.h> @@ -20,8 +22,6 @@ #include <linux/usb.h> #include <linux/usb/serial.h> -static int debug; - struct usbcons_info { int magic; int break_flag; @@ -68,8 +68,6 @@ static int usb_console_setup(struct console *co, char *options) struct tty_struct *tty = NULL; struct ktermios dummy; - dbg("%s", __func__); - if (options) { baud = simple_strtoul(options, NULL, 10); s = options; @@ -113,8 +111,7 @@ static int usb_console_setup(struct console *co, char *options) serial = usb_serial_get_by_index(co->index); if (serial == NULL) { /* no device is connected yet, sorry :( */ - printk(KERN_ERR "No USB device connected to ttyUSB%i\n", - co->index); + pr_err("No USB device connected to ttyUSB%i\n", co->index); return -ENODEV; } @@ -213,10 +210,10 @@ static void usb_console_write(struct console *co, if (count == 0) return; - dbg("%s - port %d, %d byte(s)", __func__, port->number, count); + pr_debug("%s - port %d, %d byte(s)\n", __func__, port->number, count); if (!port->port.console) { - dbg("%s - port not opened", __func__); + pr_debug("%s - port not opened\n", __func__); return; } @@ -237,7 +234,7 @@ static void usb_console_write(struct console *co, retval = serial->type->write(NULL, port, buf, i); else retval = usb_serial_generic_write(NULL, port, buf, i); - dbg("%s - return value : %d", __func__, retval); + pr_debug("%s - return value : %d\n", __func__, retval); if (lf) { /* append CR after LF */ unsigned char cr = 13; @@ -247,7 +244,7 @@ static void usb_console_write(struct console *co, else retval = usb_serial_generic_write(NULL, port, &cr, 1); - dbg("%s - return value : %d", __func__, retval); + pr_debug("%s - return value : %d\n", __func__, retval); } buf += i; count -= i; @@ -284,10 +281,8 @@ void usb_serial_console_disconnect(struct usb_serial *serial) } } -void usb_serial_console_init(int serial_debug, int minor) +void usb_serial_console_init(int minor) { - debug = serial_debug; - if (minor == 0) { /* * Call register_console() if this is the first device plugged @@ -302,7 +297,7 @@ void usb_serial_console_init(int serial_debug, int minor) * register_console). console_write() is called immediately * from register_console iff CON_PRINTBUFFER is set in flags. */ - dbg("registering the USB serial console."); + pr_debug("registering the USB serial console.\n"); register_console(&usbcons); } } diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index ba5e07e188a0..28af5acc3360 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -52,8 +52,6 @@ static int cp210x_startup(struct usb_serial *); static void cp210x_release(struct usb_serial *); static void cp210x_dtr_rts(struct usb_serial_port *p, int on); -static bool debug; - static const struct usb_device_id id_table[] = { { USB_DEVICE(0x045B, 0x0053) }, /* Renesas RX610 RX-Stick */ { USB_DEVICE(0x0471, 0x066A) }, /* AKTAKOM ACE-1001 cable */ @@ -304,9 +302,8 @@ static int cp210x_get_config(struct usb_serial_port *port, u8 request, kfree(buf); if (result != size) { - dbg("%s - Unable to send config request, " - "request=0x%x size=%d result=%d", - __func__, request, size, result); + dev_dbg(&port->dev, "%s - Unable to send config request, request=0x%x size=%d result=%d\n", + __func__, request, size, result); if (result > 0) result = -EPROTO; @@ -361,9 +358,8 @@ static int cp210x_set_config(struct usb_serial_port *port, u8 request, kfree(buf); if ((size > 2 && result != size) || result < 0) { - dbg("%s - Unable to send request, " - "request=0x%x size=%d result=%d", - __func__, request, size, result); + dev_dbg(&port->dev, "%s - Unable to send request, request=0x%x size=%d result=%d\n", + __func__, request, size, result); if (result > 0) result = -EPROTO; @@ -487,13 +483,14 @@ static void cp210x_get_termios(struct tty_struct *tty, static void cp210x_get_termios_port(struct usb_serial_port *port, unsigned int *cflagp, unsigned int *baudp) { + struct device *dev = &port->dev; unsigned int cflag, modem_ctl[4]; unsigned int baud; unsigned int bits; cp210x_get_config(port, CP210X_GET_BAUDRATE, &baud, 4); - dbg("%s - baud rate = %d", __func__, baud); + dev_dbg(dev, "%s - baud rate = %d\n", __func__, baud); *baudp = baud; cflag = *cflagp; @@ -502,31 +499,30 @@ static void cp210x_get_termios_port(struct usb_serial_port *port, cflag &= ~CSIZE; switch (bits & BITS_DATA_MASK) { case BITS_DATA_5: - dbg("%s - data bits = 5", __func__); + dev_dbg(dev, "%s - data bits = 5\n", __func__); cflag |= CS5; break; case BITS_DATA_6: - dbg("%s - data bits = 6", __func__); + dev_dbg(dev, "%s - data bits = 6\n", __func__); cflag |= CS6; break; case BITS_DATA_7: - dbg("%s - data bits = 7", __func__); + dev_dbg(dev, "%s - data bits = 7\n", __func__); cflag |= CS7; break; case BITS_DATA_8: - dbg("%s - data bits = 8", __func__); + dev_dbg(dev, "%s - data bits = 8\n", __func__); cflag |= CS8; break; case BITS_DATA_9: - dbg("%s - data bits = 9 (not supported, using 8 data bits)", - __func__); + dev_dbg(dev, "%s - data bits = 9 (not supported, using 8 data bits)\n", __func__); cflag |= CS8; bits &= ~BITS_DATA_MASK; bits |= BITS_DATA_8; cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); break; default: - dbg("%s - Unknown number of data bits, using 8", __func__); + dev_dbg(dev, "%s - Unknown number of data bits, using 8\n", __func__); cflag |= CS8; bits &= ~BITS_DATA_MASK; bits |= BITS_DATA_8; @@ -536,29 +532,29 @@ static void cp210x_get_termios_port(struct usb_serial_port *port, switch (bits & BITS_PARITY_MASK) { case BITS_PARITY_NONE: - dbg("%s - parity = NONE", __func__); + dev_dbg(dev, "%s - parity = NONE\n", __func__); cflag &= ~PARENB; break; case BITS_PARITY_ODD: - dbg("%s - parity = ODD", __func__); + dev_dbg(dev, "%s - parity = ODD\n", __func__); cflag |= (PARENB|PARODD); break; case BITS_PARITY_EVEN: - dbg("%s - parity = EVEN", __func__); + dev_dbg(dev, "%s - parity = EVEN\n", __func__); cflag &= ~PARODD; cflag |= PARENB; break; case BITS_PARITY_MARK: - dbg("%s - parity = MARK", __func__); + dev_dbg(dev, "%s - parity = MARK\n", __func__); cflag |= (PARENB|PARODD|CMSPAR); break; case BITS_PARITY_SPACE: - dbg("%s - parity = SPACE", __func__); + dev_dbg(dev, "%s - parity = SPACE\n", __func__); cflag &= ~PARODD; cflag |= (PARENB|CMSPAR); break; default: - dbg("%s - Unknown parity mode, disabling parity", __func__); + dev_dbg(dev, "%s - Unknown parity mode, disabling parity\n", __func__); cflag &= ~PARENB; bits &= ~BITS_PARITY_MASK; cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); @@ -568,21 +564,19 @@ static void cp210x_get_termios_port(struct usb_serial_port *port, cflag &= ~CSTOPB; switch (bits & BITS_STOP_MASK) { case BITS_STOP_1: - dbg("%s - stop bits = 1", __func__); + dev_dbg(dev, "%s - stop bits = 1\n", __func__); break; case BITS_STOP_1_5: - dbg("%s - stop bits = 1.5 (not supported, using 1 stop bit)", - __func__); + dev_dbg(dev, "%s - stop bits = 1.5 (not supported, using 1 stop bit)\n", __func__); bits &= ~BITS_STOP_MASK; cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); break; case BITS_STOP_2: - dbg("%s - stop bits = 2", __func__); + dev_dbg(dev, "%s - stop bits = 2\n", __func__); cflag |= CSTOPB; break; default: - dbg("%s - Unknown number of stop bits, using 1 stop bit", - __func__); + dev_dbg(dev, "%s - Unknown number of stop bits, using 1 stop bit\n", __func__); bits &= ~BITS_STOP_MASK; cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); break; @@ -590,10 +584,10 @@ static void cp210x_get_termios_port(struct usb_serial_port *port, cp210x_get_config(port, CP210X_GET_FLOW, modem_ctl, 16); if (modem_ctl[0] & 0x0008) { - dbg("%s - flow control = CRTSCTS", __func__); + dev_dbg(dev, "%s - flow control = CRTSCTS\n", __func__); cflag |= CRTSCTS; } else { - dbg("%s - flow control = NONE", __func__); + dev_dbg(dev, "%s - flow control = NONE\n", __func__); cflag &= ~CRTSCTS; } @@ -640,7 +634,7 @@ static void cp210x_change_speed(struct tty_struct *tty, */ baud = cp210x_quantise_baudrate(baud); - dbg("%s - setting baud rate to %u", __func__, baud); + dev_dbg(&port->dev, "%s - setting baud rate to %u\n", __func__, baud); if (cp210x_set_config(port, CP210X_SET_BAUDRATE, &baud, sizeof(baud))) { dev_warn(&port->dev, "failed to set baud rate to %u\n", baud); @@ -656,11 +650,12 @@ static void cp210x_change_speed(struct tty_struct *tty, static void cp210x_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios) { + struct device *dev = &port->dev; unsigned int cflag, old_cflag; unsigned int bits; unsigned int modem_ctl[4]; - dbg("%s - port %d", __func__, port->number); + dev_dbg(dev, "%s - port %d\n", __func__, port->number); if (!tty) return; @@ -678,34 +673,31 @@ static void cp210x_set_termios(struct tty_struct *tty, switch (cflag & CSIZE) { case CS5: bits |= BITS_DATA_5; - dbg("%s - data bits = 5", __func__); + dev_dbg(dev, "%s - data bits = 5\n", __func__); break; case CS6: bits |= BITS_DATA_6; - dbg("%s - data bits = 6", __func__); + dev_dbg(dev, "%s - data bits = 6\n", __func__); break; case CS7: bits |= BITS_DATA_7; - dbg("%s - data bits = 7", __func__); + dev_dbg(dev, "%s - data bits = 7\n", __func__); break; case CS8: bits |= BITS_DATA_8; - dbg("%s - data bits = 8", __func__); + dev_dbg(dev, "%s - data bits = 8\n", __func__); break; /*case CS9: bits |= BITS_DATA_9; - dbg("%s - data bits = 9", __func__); + dev_dbg(dev, "%s - data bits = 9\n", __func__); break;*/ default: - dbg("cp210x driver does not " - "support the number of bits requested," - " using 8 bit mode"); + dev_dbg(dev, "cp210x driver does not support the number of bits requested, using 8 bit mode\n"); bits |= BITS_DATA_8; break; } if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2)) - dbg("Number of data bits requested " - "not supported by device"); + dev_dbg(dev, "Number of data bits requested not supported by device\n"); } if ((cflag & (PARENB|PARODD|CMSPAR)) != @@ -714,25 +706,25 @@ static void cp210x_set_termios(struct tty_struct *tty, bits &= ~BITS_PARITY_MASK; if (cflag & PARENB) { if (cflag & CMSPAR) { - if (cflag & PARODD) { - bits |= BITS_PARITY_MARK; - dbg("%s - parity = MARK", __func__); - } else { - bits |= BITS_PARITY_SPACE; - dbg("%s - parity = SPACE", __func__); - } + if (cflag & PARODD) { + bits |= BITS_PARITY_MARK; + dev_dbg(dev, "%s - parity = MARK\n", __func__); + } else { + bits |= BITS_PARITY_SPACE; + dev_dbg(dev, "%s - parity = SPACE\n", __func__); + } } else { - if (cflag & PARODD) { - bits |= BITS_PARITY_ODD; - dbg("%s - parity = ODD", __func__); - } else { - bits |= BITS_PARITY_EVEN; - dbg("%s - parity = EVEN", __func__); - } + if (cflag & PARODD) { + bits |= BITS_PARITY_ODD; + dev_dbg(dev, "%s - parity = ODD\n", __func__); + } else { + bits |= BITS_PARITY_EVEN; + dev_dbg(dev, "%s - parity = EVEN\n", __func__); + } } } if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2)) - dbg("Parity mode not supported by device"); + dev_dbg(dev, "Parity mode not supported by device\n"); } if ((cflag & CSTOPB) != (old_cflag & CSTOPB)) { @@ -740,37 +732,36 @@ static void cp210x_set_termios(struct tty_struct *tty, bits &= ~BITS_STOP_MASK; if (cflag & CSTOPB) { bits |= BITS_STOP_2; - dbg("%s - stop bits = 2", __func__); + dev_dbg(dev, "%s - stop bits = 2\n", __func__); } else { bits |= BITS_STOP_1; - dbg("%s - stop bits = 1", __func__); + dev_dbg(dev, "%s - stop bits = 1\n", __func__); } if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2)) - dbg("Number of stop bits requested " - "not supported by device"); + dev_dbg(dev, "Number of stop bits requested not supported by device\n"); } if ((cflag & CRTSCTS) != (old_cflag & CRTSCTS)) { cp210x_get_config(port, CP210X_GET_FLOW, modem_ctl, 16); - dbg("%s - read modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x", - __func__, modem_ctl[0], modem_ctl[1], - modem_ctl[2], modem_ctl[3]); + dev_dbg(dev, "%s - read modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x\n", + __func__, modem_ctl[0], modem_ctl[1], + modem_ctl[2], modem_ctl[3]); if (cflag & CRTSCTS) { modem_ctl[0] &= ~0x7B; modem_ctl[0] |= 0x09; modem_ctl[1] = 0x80; - dbg("%s - flow control = CRTSCTS", __func__); + dev_dbg(dev, "%s - flow control = CRTSCTS\n", __func__); } else { modem_ctl[0] &= ~0x7B; modem_ctl[0] |= 0x01; modem_ctl[1] |= 0x40; - dbg("%s - flow control = NONE", __func__); + dev_dbg(dev, "%s - flow control = NONE\n", __func__); } - dbg("%s - write modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x", - __func__, modem_ctl[0], modem_ctl[1], - modem_ctl[2], modem_ctl[3]); + dev_dbg(dev, "%s - write modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x\n", + __func__, modem_ctl[0], modem_ctl[1], + modem_ctl[2], modem_ctl[3]); cp210x_set_config(port, CP210X_SET_FLOW, modem_ctl, 16); } @@ -805,7 +796,7 @@ static int cp210x_tiocmset_port(struct usb_serial_port *port, control |= CONTROL_WRITE_DTR; } - dbg("%s - control = 0x%.4x", __func__, control); + dev_dbg(&port->dev, "%s - control = 0x%.4x\n", __func__, control); return cp210x_set_config(port, CP210X_SET_MHS, &control, 2); } @@ -833,7 +824,7 @@ static int cp210x_tiocmget (struct tty_struct *tty) |((control & CONTROL_RING)? TIOCM_RI : 0) |((control & CONTROL_DCD) ? TIOCM_CD : 0); - dbg("%s - control = 0x%.2x", __func__, control); + dev_dbg(&port->dev, "%s - control = 0x%.2x\n", __func__, control); return result; } @@ -847,8 +838,8 @@ static void cp210x_break_ctl (struct tty_struct *tty, int break_state) state = BREAK_OFF; else state = BREAK_ON; - dbg("%s - turning break %s", __func__, - state == BREAK_OFF ? "off" : "on"); + dev_dbg(&port->dev, "%s - turning break %s\n", __func__, + state == BREAK_OFF ? "off" : "on"); cp210x_set_config(port, CP210X_SET_BREAK, &state, 2); } @@ -865,7 +856,6 @@ static int cp210x_startup(struct usb_serial *serial) if (!port_priv) return -ENOMEM; - memset(port_priv, 0x00, sizeof(*port_priv)); port_priv->bInterfaceNumber = serial->interface->cur_altsetting->desc.bInterfaceNumber; @@ -892,6 +882,3 @@ module_usb_serial_driver(serial_drivers, id_table); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_VERSION(DRIVER_VERSION); MODULE_LICENSE("GPL"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Enable verbose debugging messages"); diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c index 3aa0b530f68e..2a7aecc72237 100644 --- a/drivers/usb/serial/cyberjack.c +++ b/drivers/usb/serial/cyberjack.c @@ -43,8 +43,6 @@ #define CYBERJACK_LOCAL_BUF_SIZE 32 -static bool debug; - /* * Version Information */ @@ -136,7 +134,8 @@ static int cyberjack_startup(struct usb_serial *serial) if (result) dev_err(&serial->dev->dev, "usb_submit_urb(read int) failed\n"); - dbg("%s - usb_submit_urb(int urb)", __func__); + dev_dbg(&serial->dev->dev, "%s - usb_submit_urb(int urb)\n", + __func__); } return 0; @@ -167,7 +166,7 @@ static int cyberjack_open(struct tty_struct *tty, unsigned long flags; int result = 0; - dbg("%s - usb_clear_halt", __func__); + dev_dbg(&port->dev, "%s - usb_clear_halt\n", __func__); usb_clear_halt(port->serial->dev, port->write_urb->pipe); priv = usb_get_serial_port_data(port); @@ -192,18 +191,19 @@ static void cyberjack_close(struct usb_serial_port *port) static int cyberjack_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count) { + struct device *dev = &port->dev; struct cyberjack_private *priv = usb_get_serial_port_data(port); unsigned long flags; int result; int wrexpected; if (count == 0) { - dbg("%s - write request of 0 bytes", __func__); + dev_dbg(dev, "%s - write request of 0 bytes\n", __func__); return 0; } if (!test_and_clear_bit(0, &port->write_urbs_free)) { - dbg("%s - already writing", __func__); + dev_dbg(dev, "%s - already writing\n", __func__); return 0; } @@ -220,13 +220,12 @@ static int cyberjack_write(struct tty_struct *tty, /* Copy data */ memcpy(priv->wrbuf + priv->wrfilled, buf, count); - usb_serial_debug_data(debug, &port->dev, __func__, count, - priv->wrbuf + priv->wrfilled); + usb_serial_debug_data(dev, __func__, count, priv->wrbuf + priv->wrfilled); priv->wrfilled += count; if (priv->wrfilled >= 3) { wrexpected = ((int)priv->wrbuf[2]<<8)+priv->wrbuf[1]+3; - dbg("%s - expected data: %d", __func__, wrexpected); + dev_dbg(dev, "%s - expected data: %d\n", __func__, wrexpected); } else wrexpected = sizeof(priv->wrbuf); @@ -234,7 +233,7 @@ static int cyberjack_write(struct tty_struct *tty, /* We have enough data to begin transmission */ int length; - dbg("%s - transmitting data (frame 1)", __func__); + dev_dbg(dev, "%s - transmitting data (frame 1)\n", __func__); length = (wrexpected > port->bulk_out_size) ? port->bulk_out_size : wrexpected; @@ -258,11 +257,11 @@ static int cyberjack_write(struct tty_struct *tty, return 0; } - dbg("%s - priv->wrsent=%d", __func__, priv->wrsent); - dbg("%s - priv->wrfilled=%d", __func__, priv->wrfilled); + dev_dbg(dev, "%s - priv->wrsent=%d\n", __func__, priv->wrsent); + dev_dbg(dev, "%s - priv->wrfilled=%d\n", __func__, priv->wrfilled); if (priv->wrsent >= priv->wrfilled) { - dbg("%s - buffer cleaned", __func__); + dev_dbg(dev, "%s - buffer cleaned\n", __func__); memset(priv->wrbuf, 0, sizeof(priv->wrbuf)); priv->wrfilled = 0; priv->wrsent = 0; @@ -284,6 +283,7 @@ static void cyberjack_read_int_callback(struct urb *urb) { struct usb_serial_port *port = urb->context; struct cyberjack_private *priv = usb_get_serial_port_data(port); + struct device *dev = &port->dev; unsigned char *data = urb->transfer_buffer; int status = urb->status; int result; @@ -292,8 +292,7 @@ static void cyberjack_read_int_callback(struct urb *urb) if (status) return; - usb_serial_debug_data(debug, &port->dev, __func__, - urb->actual_length, data); + usb_serial_debug_data(dev, __func__, urb->actual_length, data); /* React only to interrupts signaling a bulk_in transfer */ if (urb->actual_length == 4 && data[0] == 0x01) { @@ -307,7 +306,7 @@ static void cyberjack_read_int_callback(struct urb *urb) old_rdtodo = priv->rdtodo; if (old_rdtodo + size < old_rdtodo) { - dbg("To many bulk_in urbs to do."); + dev_dbg(dev, "To many bulk_in urbs to do.\n"); spin_unlock(&priv->lock); goto resubmit; } @@ -315,17 +314,16 @@ static void cyberjack_read_int_callback(struct urb *urb) /* "+=" is probably more fault tollerant than "=" */ priv->rdtodo += size; - dbg("%s - rdtodo: %d", __func__, priv->rdtodo); + dev_dbg(dev, "%s - rdtodo: %d\n", __func__, priv->rdtodo); spin_unlock(&priv->lock); if (!old_rdtodo) { result = usb_submit_urb(port->read_urb, GFP_ATOMIC); if (result) - dev_err(&port->dev, "%s - failed resubmitting " - "read urb, error %d\n", + dev_err(dev, "%s - failed resubmitting read urb, error %d\n", __func__, result); - dbg("%s - usb_submit_urb(read urb)", __func__); + dev_dbg(dev, "%s - usb_submit_urb(read urb)\n", __func__); } } @@ -333,30 +331,30 @@ resubmit: result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC); if (result) dev_err(&port->dev, "usb_submit_urb(read int) failed\n"); - dbg("%s - usb_submit_urb(int urb)", __func__); + dev_dbg(dev, "%s - usb_submit_urb(int urb)\n", __func__); } static void cyberjack_read_bulk_callback(struct urb *urb) { struct usb_serial_port *port = urb->context; struct cyberjack_private *priv = usb_get_serial_port_data(port); + struct device *dev = &port->dev; struct tty_struct *tty; unsigned char *data = urb->transfer_buffer; short todo; int result; int status = urb->status; - usb_serial_debug_data(debug, &port->dev, __func__, - urb->actual_length, data); + usb_serial_debug_data(dev, __func__, urb->actual_length, data); if (status) { - dbg("%s - nonzero read bulk status received: %d", - __func__, status); + dev_dbg(dev, "%s - nonzero read bulk status received: %d\n", + __func__, status); return; } tty = tty_port_tty_get(&port->port); if (!tty) { - dbg("%s - ignoring since device not open", __func__); + dev_dbg(dev, "%s - ignoring since device not open\n", __func__); return; } if (urb->actual_length) { @@ -376,15 +374,15 @@ static void cyberjack_read_bulk_callback(struct urb *urb) spin_unlock(&priv->lock); - dbg("%s - rdtodo: %d", __func__, todo); + dev_dbg(dev, "%s - rdtodo: %d\n", __func__, todo); /* Continue to read if we have still urbs to do. */ if (todo /* || (urb->actual_length==port->bulk_in_endpointAddress)*/) { result = usb_submit_urb(port->read_urb, GFP_ATOMIC); if (result) - dev_err(&port->dev, "%s - failed resubmitting read " - "urb, error %d\n", __func__, result); - dbg("%s - usb_submit_urb(read urb)", __func__); + dev_err(dev, "%s - failed resubmitting read urb, error %d\n", + __func__, result); + dev_dbg(dev, "%s - usb_submit_urb(read urb)\n", __func__); } } @@ -392,12 +390,13 @@ static void cyberjack_write_bulk_callback(struct urb *urb) { struct usb_serial_port *port = urb->context; struct cyberjack_private *priv = usb_get_serial_port_data(port); + struct device *dev = &port->dev; int status = urb->status; set_bit(0, &port->write_urbs_free); if (status) { - dbg("%s - nonzero write bulk status received: %d", - __func__, status); + dev_dbg(dev, "%s - nonzero write bulk status received: %d\n", + __func__, status); return; } @@ -407,7 +406,7 @@ static void cyberjack_write_bulk_callback(struct urb *urb) if (priv->wrfilled) { int length, blksize, result; - dbg("%s - transmitting data (frame n)", __func__); + dev_dbg(dev, "%s - transmitting data (frame n)\n", __func__); length = ((priv->wrfilled - priv->wrsent) > port->bulk_out_size) ? port->bulk_out_size : (priv->wrfilled - priv->wrsent); @@ -422,8 +421,7 @@ static void cyberjack_write_bulk_callback(struct urb *urb) /* send the data out the bulk port */ result = usb_submit_urb(port->write_urb, GFP_ATOMIC); if (result) { - dev_err(&port->dev, - "%s - failed submitting write urb, error %d\n", + dev_err(dev, "%s - failed submitting write urb, error %d\n", __func__, result); /* Throw away data. No better idea what to do with it. */ priv->wrfilled = 0; @@ -431,14 +429,14 @@ static void cyberjack_write_bulk_callback(struct urb *urb) goto exit; } - dbg("%s - priv->wrsent=%d", __func__, priv->wrsent); - dbg("%s - priv->wrfilled=%d", __func__, priv->wrfilled); + dev_dbg(dev, "%s - priv->wrsent=%d\n", __func__, priv->wrsent); + dev_dbg(dev, "%s - priv->wrfilled=%d\n", __func__, priv->wrfilled); blksize = ((int)priv->wrbuf[2]<<8)+priv->wrbuf[1]+3; if (priv->wrsent >= priv->wrfilled || priv->wrsent >= blksize) { - dbg("%s - buffer cleaned", __func__); + dev_dbg(dev, "%s - buffer cleaned\n", __func__); memset(priv->wrbuf, 0, sizeof(priv->wrbuf)); priv->wrfilled = 0; priv->wrsent = 0; @@ -456,6 +454,3 @@ MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_VERSION(DRIVER_VERSION); MODULE_LICENSE("GPL"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index be34f153e566..1befce21e173 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -46,7 +46,6 @@ #include "cypress_m8.h" -static bool debug; static bool stats; static int interval; static bool unstable_bauds; @@ -263,8 +262,9 @@ static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate) * safest speed for a part like that. */ if (new_rate > 4800) { - dbg("%s - failed setting baud rate, device incapable " - "speed %d", __func__, new_rate); + dev_dbg(&port->dev, + "%s - failed setting baud rate, device incapable speed %d\n", + __func__, new_rate); return -1; } } @@ -274,8 +274,9 @@ static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate) /* 300 and 600 baud rates are supported under * the generic firmware, but are not used with * NMEA and SiRF protocols */ - dbg("%s - failed setting baud rate, unsupported speed " - "of %d on Earthmate GPS", __func__, new_rate); + dev_dbg(&port->dev, + "%s - failed setting baud rate, unsupported speed of %d on Earthmate GPS", + __func__, new_rate); return -1; } break; @@ -294,6 +295,7 @@ static int cypress_serial_control(struct tty_struct *tty, { int new_baudrate = 0, retval = 0, tries = 0; struct cypress_private *priv; + struct device *dev = &port->dev; u8 *feature_buffer; const unsigned int feature_len = 5; unsigned long flags; @@ -312,16 +314,16 @@ static int cypress_serial_control(struct tty_struct *tty, /* 0 means 'Hang up' so doesn't change the true bit rate */ new_baudrate = priv->baud_rate; if (baud_rate && baud_rate != priv->baud_rate) { - dbg("%s - baud rate is changing", __func__); + dev_dbg(dev, "%s - baud rate is changing\n", __func__); retval = analyze_baud_rate(port, baud_rate); if (retval >= 0) { new_baudrate = retval; - dbg("%s - New baud rate set to %d", - __func__, new_baudrate); + dev_dbg(dev, "%s - New baud rate set to %d\n", + __func__, new_baudrate); } } - dbg("%s - baud rate is being sent as %d", - __func__, new_baudrate); + dev_dbg(dev, "%s - baud rate is being sent as %d\n", __func__, + new_baudrate); /* fill the feature_buffer with new configuration */ put_unaligned_le32(new_baudrate, feature_buffer); @@ -333,9 +335,8 @@ static int cypress_serial_control(struct tty_struct *tty, /* 1 bit gap */ feature_buffer[4] |= (reset << 7); /* assign reset at end of byte, 1 bit space */ - dbg("%s - device is being sent this feature report:", - __func__); - dbg("%s - %02X - %02X - %02X - %02X - %02X", __func__, + dev_dbg(dev, "%s - device is being sent this feature report:\n", __func__); + dev_dbg(dev, "%s - %02X - %02X - %02X - %02X - %02X\n", __func__, feature_buffer[0], feature_buffer[1], feature_buffer[2], feature_buffer[3], feature_buffer[4]); @@ -355,8 +356,8 @@ static int cypress_serial_control(struct tty_struct *tty, retval != -ENODEV); if (retval != feature_len) { - dev_err(&port->dev, "%s - failed sending serial " - "line settings - %d\n", __func__, retval); + dev_err(dev, "%s - failed sending serial line settings - %d\n", + __func__, retval); cypress_set_dead(port); } else { spin_lock_irqsave(&priv->lock, flags); @@ -377,7 +378,7 @@ static int cypress_serial_control(struct tty_struct *tty, retval = -ENOTTY; goto out; } - dbg("%s - retreiving serial line settings", __func__); + dev_dbg(dev, "%s - retreiving serial line settings\n", __func__); do { retval = usb_control_msg(port->serial->dev, usb_rcvctrlpipe(port->serial->dev, 0), @@ -392,8 +393,8 @@ static int cypress_serial_control(struct tty_struct *tty, && retval != -ENODEV); if (retval != feature_len) { - dev_err(&port->dev, "%s - failed to retrieve serial " - "line settings - %d\n", __func__, retval); + dev_err(dev, "%s - failed to retrieve serial line settings - %d\n", + __func__, retval); cypress_set_dead(port); goto out; } else { @@ -474,14 +475,14 @@ static int generic_startup(struct usb_serial *serial) if (interval > 0) { priv->write_urb_interval = interval; priv->read_urb_interval = interval; - dbg("%s - port %d read & write intervals forced to %d", - __func__, port->number, interval); + dev_dbg(&port->dev, "%s - read & write intervals forced to %d\n", + __func__, interval); } else { priv->write_urb_interval = port->interrupt_out_urb->interval; priv->read_urb_interval = port->interrupt_in_urb->interval; - dbg("%s - port %d intervals: read=%d write=%d", - __func__, port->number, - priv->read_urb_interval, priv->write_urb_interval); + dev_dbg(&port->dev, "%s - intervals: read=%d write=%d\n", + __func__, priv->read_urb_interval, + priv->write_urb_interval); } usb_set_serial_port_data(port, priv); @@ -495,8 +496,7 @@ static int cypress_earthmate_startup(struct usb_serial *serial) struct usb_serial_port *port = serial->port[0]; if (generic_startup(serial)) { - dbg("%s - Failed setting up port %d", __func__, - port->number); + dev_dbg(&port->dev, "%s - Failed setting up port\n", __func__); return 1; } @@ -511,8 +511,9 @@ static int cypress_earthmate_startup(struct usb_serial *serial) handle GET_CONFIG requests; everything they've produced since that time crashes if this command is attempted :-( */ - dbg("%s - Marking this device as unsafe for GET_CONFIG " - "commands", __func__); + dev_dbg(&port->dev, + "%s - Marking this device as unsafe for GET_CONFIG commands\n", + __func__); priv->get_cfg_unsafe = !0; } @@ -523,14 +524,14 @@ static int cypress_earthmate_startup(struct usb_serial *serial) static int cypress_hidcom_startup(struct usb_serial *serial) { struct cypress_private *priv; + struct usb_serial_port *port = serial->port[0]; if (generic_startup(serial)) { - dbg("%s - Failed setting up port %d", __func__, - serial->port[0]->number); + dev_dbg(&port->dev, "%s - Failed setting up port\n", __func__); return 1; } - priv = usb_get_serial_port_data(serial->port[0]); + priv = usb_get_serial_port_data(port); priv->chiptype = CT_CYPHIDCOM; return 0; @@ -540,14 +541,14 @@ static int cypress_hidcom_startup(struct usb_serial *serial) static int cypress_ca42v2_startup(struct usb_serial *serial) { struct cypress_private *priv; + struct usb_serial_port *port = serial->port[0]; if (generic_startup(serial)) { - dbg("%s - Failed setting up port %d", __func__, - serial->port[0]->number); + dev_dbg(&port->dev, "%s - Failed setting up port\n", __func__); return 1; } - priv = usb_get_serial_port_data(serial->port[0]); + priv = usb_get_serial_port_data(port); priv->chiptype = CT_CA42V2; return 0; @@ -649,7 +650,7 @@ static void cypress_close(struct usb_serial_port *port) kfifo_reset_out(&priv->write_fifo); spin_unlock_irqrestore(&priv->lock, flags); - dbg("%s - stopping urbs", __func__); + dev_dbg(&port->dev, "%s - stopping urbs\n", __func__); usb_kill_urb(port->interrupt_in_urb); usb_kill_urb(port->interrupt_out_urb); @@ -665,7 +666,7 @@ static int cypress_write(struct tty_struct *tty, struct usb_serial_port *port, { struct cypress_private *priv = usb_get_serial_port_data(port); - dbg("%s - port %d, %d bytes", __func__, port->number, count); + dev_dbg(&port->dev, "%s - port %d, %d bytes\n", __func__, port->number, count); /* line control commands, which need to be executed immediately, are not put into the buffer for obvious reasons. @@ -691,17 +692,18 @@ static void cypress_send(struct usb_serial_port *port) { int count = 0, result, offset, actual_size; struct cypress_private *priv = usb_get_serial_port_data(port); + struct device *dev = &port->dev; unsigned long flags; if (!priv->comm_is_ok) return; - dbg("%s - interrupt out size is %d", __func__, - port->interrupt_out_size); + dev_dbg(dev, "%s - interrupt out size is %d\n", __func__, + port->interrupt_out_size); spin_lock_irqsave(&priv->lock, flags); if (priv->write_urb_in_use) { - dbg("%s - can't write, urb in use", __func__); + dev_dbg(dev, "%s - can't write, urb in use\n", __func__); spin_unlock_irqrestore(&priv->lock, flags); return; } @@ -731,7 +733,7 @@ static void cypress_send(struct usb_serial_port *port) if (priv->cmd_ctrl) { priv->cmd_count++; - dbg("%s - line control command being issued", __func__); + dev_dbg(dev, "%s - line control command being issued\n", __func__); spin_unlock_irqrestore(&priv->lock, flags); goto send; } else @@ -753,7 +755,7 @@ static void cypress_send(struct usb_serial_port *port) port->interrupt_out_buffer[0] |= count; } - dbg("%s - count is %d", __func__, count); + dev_dbg(dev, "%s - count is %d\n", __func__, count); send: spin_lock_irqsave(&priv->lock, flags); @@ -766,9 +768,8 @@ send: actual_size = count + (priv->pkt_fmt == packet_format_1 ? 2 : 1); - usb_serial_debug_data(debug, &port->dev, __func__, - port->interrupt_out_size, - port->interrupt_out_urb->transfer_buffer); + usb_serial_debug_data(dev, __func__, port->interrupt_out_size, + port->interrupt_out_urb->transfer_buffer); usb_fill_int_urb(port->interrupt_out_urb, port->serial->dev, usb_sndintpipe(port->serial->dev, port->interrupt_out_endpointAddress), @@ -807,7 +808,7 @@ static int cypress_write_room(struct tty_struct *tty) room = kfifo_avail(&priv->write_fifo); spin_unlock_irqrestore(&priv->lock, flags); - dbg("%s - returns %d", __func__, room); + dev_dbg(&port->dev, "%s - returns %d\n", __func__, room); return room; } @@ -832,7 +833,7 @@ static int cypress_tiocmget(struct tty_struct *tty) | ((status & UART_RI) ? TIOCM_RI : 0) | ((status & UART_CD) ? TIOCM_CD : 0); - dbg("%s - result = %x", __func__, result); + dev_dbg(&port->dev, "%s - result = %x\n", __func__, result); return result; } @@ -867,7 +868,7 @@ static int cypress_ioctl(struct tty_struct *tty, struct usb_serial_port *port = tty->driver_data; struct cypress_private *priv = usb_get_serial_port_data(port); - dbg("%s - port %d, cmd 0x%.4x", __func__, port->number, cmd); + dev_dbg(&port->dev, "%s - port %d, cmd 0x%.4x\n", __func__, port->number, cmd); switch (cmd) { /* This code comes from drivers/char/serial.c and ftdi_sio.c */ @@ -902,7 +903,7 @@ static int cypress_ioctl(struct tty_struct *tty, default: break; } - dbg("%s - arg not supported - it was 0x%04x - check include/asm/ioctls.h", __func__, cmd); + dev_dbg(&port->dev, "%s - arg not supported - it was 0x%04x - check include/asm/ioctls.h\n", __func__, cmd); return -ENOIOCTLCMD; } /* cypress_ioctl */ @@ -911,6 +912,7 @@ static void cypress_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios) { struct cypress_private *priv = usb_get_serial_port_data(port); + struct device *dev = &port->dev; int data_bits, stop_bits, parity_type, parity_enable; unsigned cflag, iflag; unsigned long flags; @@ -984,23 +986,21 @@ static void cypress_set_termios(struct tty_struct *tty, data_bits = 3; break; default: - dev_err(&port->dev, "%s - CSIZE was set, but not CS5-CS8\n", - __func__); + dev_err(dev, "%s - CSIZE was set, but not CS5-CS8\n", __func__); data_bits = 3; } spin_lock_irqsave(&priv->lock, flags); oldlines = priv->line_control; if ((cflag & CBAUD) == B0) { /* drop dtr and rts */ - dbg("%s - dropping the lines, baud rate 0bps", __func__); + dev_dbg(dev, "%s - dropping the lines, baud rate 0bps\n", __func__); priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS); } else priv->line_control = (CONTROL_DTR | CONTROL_RTS); spin_unlock_irqrestore(&priv->lock, flags); - dbg("%s - sending %d stop_bits, %d parity_enable, %d parity_type, " - "%d data_bits (+5)", __func__, stop_bits, - parity_enable, parity_type, data_bits); + dev_dbg(dev, "%s - sending %d stop_bits, %d parity_enable, %d parity_type, %d data_bits (+5)\n", + __func__, stop_bits, parity_enable, parity_type, data_bits); cypress_serial_control(tty, port, tty_get_baud_rate(tty), data_bits, stop_bits, @@ -1017,8 +1017,7 @@ static void cypress_set_termios(struct tty_struct *tty, spin_lock_irqsave(&priv->lock, flags); if (priv->chiptype == CT_EARTHMATE && priv->baud_rate == 4800) { - dbg("Using custom termios settings for a baud rate of " - "4800bps."); + dev_dbg(dev, "Using custom termios settings for a baud rate of 4800bps.\n"); /* define custom termios settings for NMEA protocol */ tty->termios.c_iflag /* input modes - */ @@ -1067,7 +1066,7 @@ static int cypress_chars_in_buffer(struct tty_struct *tty) chars = kfifo_len(&priv->write_fifo); spin_unlock_irqrestore(&priv->lock, flags); - dbg("%s - returns %d", __func__, chars); + dev_dbg(&port->dev, "%s - returns %d\n", __func__, chars); return chars; } @@ -1112,6 +1111,7 @@ static void cypress_read_int_callback(struct urb *urb) { struct usb_serial_port *port = urb->context; struct cypress_private *priv = usb_get_serial_port_data(port); + struct device *dev = &urb->dev->dev; struct tty_struct *tty; unsigned char *data = urb->transfer_buffer; unsigned long flags; @@ -1135,16 +1135,15 @@ static void cypress_read_int_callback(struct urb *urb) /* FALLS THROUGH */ default: /* something ugly is going on... */ - dev_err(&urb->dev->dev, - "%s - unexpected nonzero read status received: %d\n", - __func__, status); + dev_err(dev, "%s - unexpected nonzero read status received: %d\n", + __func__, status); cypress_set_dead(port); return; } spin_lock_irqsave(&priv->lock, flags); if (priv->rx_flags & THROTTLED) { - dbg("%s - now throttling", __func__); + dev_dbg(dev, "%s - now throttling\n", __func__); priv->rx_flags |= ACTUALLY_THROTTLED; spin_unlock_irqrestore(&priv->lock, flags); return; @@ -1153,7 +1152,7 @@ static void cypress_read_int_callback(struct urb *urb) tty = tty_port_tty_get(&port->port); if (!tty) { - dbg("%s - bad tty pointer - exiting", __func__); + dev_dbg(dev, "%s - bad tty pointer - exiting\n", __func__); return; } @@ -1180,13 +1179,13 @@ static void cypress_read_int_callback(struct urb *urb) } spin_unlock_irqrestore(&priv->lock, flags); if (result < bytes) { - dbg("%s - wrong packet size - received %d bytes but packet " - "said %d bytes", __func__, result, bytes); + dev_dbg(dev, + "%s - wrong packet size - received %d bytes but packet said %d bytes\n", + __func__, result, bytes); goto continue_read; } - usb_serial_debug_data(debug, &port->dev, __func__, - urb->actual_length, data); + usb_serial_debug_data(&port->dev, __func__, urb->actual_length, data); spin_lock_irqsave(&priv->lock, flags); /* check to see if status has changed */ @@ -1202,7 +1201,7 @@ static void cypress_read_int_callback(struct urb *urb) * though */ if (tty && !(tty->termios.c_cflag & CLOCAL) && !(priv->current_status & UART_CD)) { - dbg("%s - calling hangup", __func__); + dev_dbg(dev, "%s - calling hangup\n", __func__); tty_hangup(tty); goto continue_read; } @@ -1215,7 +1214,7 @@ static void cypress_read_int_callback(struct urb *urb) if (priv->current_status & CYP_ERROR) { spin_unlock_irqrestore(&priv->lock, flags); tty_flag = TTY_PARITY; - dbg("%s - Parity Error detected", __func__); + dev_dbg(dev, "%s - Parity Error detected\n", __func__); } else spin_unlock_irqrestore(&priv->lock, flags); @@ -1246,9 +1245,8 @@ continue_read: priv->read_urb_interval); result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC); if (result && result != -EPERM) { - dev_err(&urb->dev->dev, "%s - failed resubmitting " - "read urb, error %d\n", __func__, - result); + dev_err(dev, "%s - failed resubmitting read urb, error %d\n", + __func__, result); cypress_set_dead(port); } } @@ -1259,6 +1257,7 @@ static void cypress_write_int_callback(struct urb *urb) { struct usb_serial_port *port = urb->context; struct cypress_private *priv = usb_get_serial_port_data(port); + struct device *dev = &urb->dev->dev; int result; int status = urb->status; @@ -1270,8 +1269,8 @@ static void cypress_write_int_callback(struct urb *urb) case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", - __func__, status); + dev_dbg(dev, "%s - urb shutting down with status: %d\n", + __func__, status); priv->write_urb_in_use = 0; return; case -EPIPE: /* no break needed; clear halt and resubmit */ @@ -1279,21 +1278,19 @@ static void cypress_write_int_callback(struct urb *urb) break; usb_clear_halt(port->serial->dev, 0x02); /* error in the urb, so we have to resubmit it */ - dbg("%s - nonzero write bulk status received: %d", + dev_dbg(dev, "%s - nonzero write bulk status received: %d\n", __func__, status); port->interrupt_out_urb->transfer_buffer_length = 1; result = usb_submit_urb(port->interrupt_out_urb, GFP_ATOMIC); if (!result) return; - dev_err(&urb->dev->dev, - "%s - failed resubmitting write urb, error %d\n", - __func__, result); + dev_err(dev, "%s - failed resubmitting write urb, error %d\n", + __func__, result); cypress_set_dead(port); break; default: - dev_err(&urb->dev->dev, - "%s - unexpected nonzero write status received: %d\n", - __func__, status); + dev_err(dev, "%s - unexpected nonzero write status received: %d\n", + __func__, status); cypress_set_dead(port); break; } @@ -1310,8 +1307,6 @@ MODULE_DESCRIPTION(DRIVER_DESC); MODULE_VERSION(DRIVER_VERSION); MODULE_LICENSE("GPL"); -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); module_param(stats, bool, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(stats, "Enable statistics or not"); module_param(interval, int, S_IRUGO | S_IWUSR); diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index afd9d2ec577b..c86f68c6b078 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -249,10 +249,6 @@ static int digi_read_inb_callback(struct urb *urb); static int digi_read_oob_callback(struct urb *urb); -/* Statics */ - -static bool debug; - static const struct usb_device_id id_table_combined[] = { { USB_DEVICE(DIGI_VENDOR_ID, DIGI_2_ID) }, { USB_DEVICE(DIGI_VENDOR_ID, DIGI_4_ID) }, @@ -404,14 +400,15 @@ static void digi_wakeup_write(struct usb_serial_port *port) static int digi_write_oob_command(struct usb_serial_port *port, unsigned char *buf, int count, int interruptible) { - int ret = 0; int len; struct usb_serial_port *oob_port = (struct usb_serial_port *)((struct digi_serial *)(usb_get_serial_data(port->serial)))->ds_oob_port; struct digi_port *oob_priv = usb_get_serial_port_data(oob_port); unsigned long flags = 0; - dbg("digi_write_oob_command: TOP: port=%d, count=%d", oob_priv->dp_port_num, count); + dev_dbg(&port->dev, + "digi_write_oob_command: TOP: port=%d, count=%d\n", + oob_priv->dp_port_num, count); spin_lock_irqsave(&oob_priv->dp_port_lock, flags); while (count > 0) { @@ -467,7 +464,7 @@ static int digi_write_inb_command(struct usb_serial_port *port, unsigned char *data = port->write_urb->transfer_buffer; unsigned long flags = 0; - dbg("digi_write_inb_command: TOP: port=%d, count=%d", + dev_dbg(&port->dev, "digi_write_inb_command: TOP: port=%d, count=%d\n", priv->dp_port_num, count); if (timeout) @@ -549,7 +546,8 @@ static int digi_set_modem_signals(struct usb_serial_port *port, unsigned long flags = 0; - dbg("digi_set_modem_signals: TOP: port=%d, modem_signals=0x%x", + dev_dbg(&port->dev, + "digi_set_modem_signals: TOP: port=%d, modem_signals=0x%x\n", port_priv->dp_port_num, modem_signals); spin_lock_irqsave(&oob_priv->dp_port_lock, flags); @@ -687,6 +685,7 @@ static void digi_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios) { struct digi_port *priv = usb_get_serial_port_data(port); + struct device *dev = &port->dev; unsigned int iflag = tty->termios.c_iflag; unsigned int cflag = tty->termios.c_cflag; unsigned int old_iflag = old_termios->c_iflag; @@ -697,7 +696,9 @@ static void digi_set_termios(struct tty_struct *tty, int i = 0; speed_t baud; - dbg("digi_set_termios: TOP: port=%d, iflag=0x%x, old_iflag=0x%x, cflag=0x%x, old_cflag=0x%x", priv->dp_port_num, iflag, old_iflag, cflag, old_cflag); + dev_dbg(dev, + "digi_set_termios: TOP: port=%d, iflag=0x%x, old_iflag=0x%x, cflag=0x%x, old_cflag=0x%x\n", + priv->dp_port_num, iflag, old_iflag, cflag, old_cflag); /* set baud rate */ baud = tty_get_baud_rate(tty); @@ -773,7 +774,8 @@ static void digi_set_termios(struct tty_struct *tty, case CS7: arg = DIGI_WORD_SIZE_7; break; case CS8: arg = DIGI_WORD_SIZE_8; break; default: - dbg("digi_set_termios: can't handle word size %d", + dev_dbg(dev, + "digi_set_termios: can't handle word size %d\n", (cflag&CSIZE)); break; } @@ -866,7 +868,7 @@ static void digi_set_termios(struct tty_struct *tty, } ret = digi_write_oob_command(port, buf, i, 1); if (ret != 0) - dbg("digi_set_termios: write oob failed, ret=%d", ret); + dev_dbg(dev, "digi_set_termios: write oob failed, ret=%d\n", ret); tty_encode_baud_rate(tty, baud, baud); } @@ -922,7 +924,8 @@ static int digi_write(struct tty_struct *tty, struct usb_serial_port *port, unsigned char *data = port->write_urb->transfer_buffer; unsigned long flags = 0; - dbg("digi_write: TOP: port=%d, count=%d, in_interrupt=%ld", + dev_dbg(&port->dev, + "digi_write: TOP: port=%d, count=%d, in_interrupt=%ld\n", priv->dp_port_num, count, in_interrupt()); /* copy user data (which can sleep) before getting spin lock */ @@ -981,7 +984,7 @@ static int digi_write(struct tty_struct *tty, struct usb_serial_port *port, dev_err_console(port, "%s: usb_submit_urb failed, ret=%d, port=%d\n", __func__, ret, priv->dp_port_num); - dbg("digi_write: returning %d", ret); + dev_dbg(&port->dev, "digi_write: returning %d\n", ret); return ret; } @@ -1012,7 +1015,7 @@ static void digi_write_bulk_callback(struct urb *urb) /* handle oob callback */ if (priv->dp_port_num == serial_priv->ds_oob_port_num) { - dbg("digi_write_bulk_callback: oob callback"); + dev_dbg(&port->dev, "digi_write_bulk_callback: oob callback\n"); spin_lock(&priv->dp_port_lock); priv->dp_write_urb_in_use = 0; wake_up_interruptible(&port->write_wait); @@ -1066,7 +1069,7 @@ static int digi_write_room(struct tty_struct *tty) room = port->bulk_out_size - 2 - priv->dp_out_buf_len; spin_unlock_irqrestore(&priv->dp_port_lock, flags); - dbg("digi_write_room: port=%d, room=%d", priv->dp_port_num, room); + dev_dbg(&port->dev, "digi_write_room: port=%d, room=%d\n", priv->dp_port_num, room); return room; } @@ -1077,12 +1080,12 @@ static int digi_chars_in_buffer(struct tty_struct *tty) struct digi_port *priv = usb_get_serial_port_data(port); if (priv->dp_write_urb_in_use) { - dbg("digi_chars_in_buffer: port=%d, chars=%d", + dev_dbg(&port->dev, "digi_chars_in_buffer: port=%d, chars=%d\n", priv->dp_port_num, port->bulk_out_size - 2); /* return(port->bulk_out_size - 2); */ return 256; } else { - dbg("digi_chars_in_buffer: port=%d, chars=%d", + dev_dbg(&port->dev, "digi_chars_in_buffer: port=%d, chars=%d\n", priv->dp_port_num, priv->dp_out_buf_len); return priv->dp_out_buf_len; } @@ -1120,7 +1123,7 @@ static int digi_open(struct tty_struct *tty, struct usb_serial_port *port) ret = digi_write_oob_command(port, buf, 8, 1); if (ret != 0) - dbg("digi_open: write oob failed, ret=%d", ret); + dev_dbg(&port->dev, "digi_open: write oob failed, ret=%d\n", ret); /* set termios settings */ if (tty) { @@ -1180,7 +1183,7 @@ static void digi_close(struct usb_serial_port *port) ret = digi_write_oob_command(port, buf, 20, 0); if (ret != 0) - dbg("digi_close: write oob failed, ret=%d", ret); + dev_dbg(&port->dev, "digi_close: write oob failed, ret=%d\n", ret); /* wait for final commands on oob port to complete */ prepare_to_wait(&priv->dp_flush_wait, &wait, @@ -1448,9 +1451,9 @@ static int digi_read_inb_callback(struct urb *urb) tty_kref_put(tty); if (opcode == DIGI_CMD_RECEIVE_DISABLE) - dbg("%s: got RECEIVE_DISABLE", __func__); + dev_dbg(&port->dev, "%s: got RECEIVE_DISABLE\n", __func__); else if (opcode != DIGI_CMD_RECEIVE_DATA) - dbg("%s: unknown opcode: %d", __func__, opcode); + dev_dbg(&port->dev, "%s: unknown opcode: %d\n", __func__, opcode); return throttled ? 1 : 0; @@ -1484,7 +1487,7 @@ static int digi_read_oob_callback(struct urb *urb) status = ((unsigned char *)urb->transfer_buffer)[i++]; val = ((unsigned char *)urb->transfer_buffer)[i++]; - dbg("digi_read_oob_callback: opcode=%d, line=%d, status=%d, val=%d", + dev_dbg(&port->dev, "digi_read_oob_callback: opcode=%d, line=%d, status=%d, val=%d\n", opcode, line, status, val); if (status != 0 || line >= serial->type->num_ports) @@ -1552,6 +1555,3 @@ module_usb_serial_driver(serial_drivers, id_table_combined); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c index 34e86383090a..43ede4a1e12c 100644 --- a/drivers/usb/serial/empeg.c +++ b/drivers/usb/serial/empeg.c @@ -28,8 +28,6 @@ #include <linux/usb.h> #include <linux/usb/serial.h> -static bool debug; - /* * Version Information */ @@ -134,6 +132,3 @@ module_usb_serial_driver(serial_drivers, id_table); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); diff --git a/drivers/usb/serial/ezusb.c b/drivers/usb/serial/ezusb.c deleted file mode 100644 index 800e8eb60003..000000000000 --- a/drivers/usb/serial/ezusb.c +++ /dev/null @@ -1,59 +0,0 @@ -/* - * EZ-USB specific functions used by some of the USB to Serial drivers. - * - * Copyright (C) 1999 - 2002 Greg Kroah-Hartman (greg@kroah.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License version - * 2 as published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/tty.h> -#include <linux/module.h> -#include <linux/usb.h> -#include <linux/usb/serial.h> - -/* EZ-USB Control and Status Register. Bit 0 controls 8051 reset */ -#define CPUCS_REG 0x7F92 - -int ezusb_writememory(struct usb_serial *serial, int address, - unsigned char *data, int length, __u8 request) -{ - int result; - unsigned char *transfer_buffer; - - if (!serial->dev) { - printk(KERN_ERR "ezusb: %s - no physical device present, " - "failing.\n", __func__); - return -ENODEV; - } - - transfer_buffer = kmemdup(data, length, GFP_KERNEL); - if (!transfer_buffer) { - dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n", - __func__, length); - return -ENOMEM; - } - result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), - request, 0x40, address, 0, transfer_buffer, length, 3000); - kfree(transfer_buffer); - return result; -} -EXPORT_SYMBOL_GPL(ezusb_writememory); - -int ezusb_set_reset(struct usb_serial *serial, unsigned char reset_bit) -{ - int response; - - response = ezusb_writememory(serial, CPUCS_REG, &reset_bit, 1, 0xa0); - if (response < 0) - dev_err(&serial->dev->dev, "%s- %d failed\n", - __func__, reset_bit); - return response; -} -EXPORT_SYMBOL_GPL(ezusb_set_reset); - diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c index 79451ee12ca0..244477107e2f 100644 --- a/drivers/usb/serial/f81232.c +++ b/drivers/usb/serial/f81232.c @@ -25,8 +25,6 @@ #include <linux/usb.h> #include <linux/usb/serial.h> -static bool debug; - static const struct usb_device_id id_table[] = { { USB_DEVICE(0x1934, 0x0706) }, { } /* Terminating entry */ @@ -85,7 +83,7 @@ static void f81232_read_int_callback(struct urb *urb) goto exit; } - usb_serial_debug_data(debug, &port->dev, __func__, + usb_serial_debug_data(&port->dev, __func__, urb->actual_length, urb->transfer_buffer); f81232_update_line_status(port, data, actual_length); @@ -389,7 +387,3 @@ module_usb_serial_driver(serial_drivers, id_table); MODULE_DESCRIPTION("Fintek F81232 USB to serial adaptor driver"); MODULE_AUTHOR("Greg Kroah-Hartman <gregkh@linuxfoundation.org"); MODULE_LICENSE("GPL v2"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); - diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 0c8d1c226273..be845873e23d 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -48,14 +48,9 @@ #include "ftdi_sio.h" #include "ftdi_sio_ids.h" -/* - * Version Information - */ -#define DRIVER_VERSION "v1.6.0" #define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Bill Ryder <bryder@sgi.com>, Kuba Ober <kuba@mareimbrium.org>, Andreas Mohr, Johan Hovold <jhovold@gmail.com>" #define DRIVER_DESC "USB FTDI Serial Converters Driver" -static bool debug; static __u16 vendor = FTDI_VID; static __u16 product; @@ -584,6 +579,8 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_IBS_PEDO_PID) }, { USB_DEVICE(FTDI_VID, FTDI_IBS_PROD_PID) }, { USB_DEVICE(FTDI_VID, FTDI_TAVIR_STK500_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_TIAO_UMPA_PID), + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, /* * ELV devices: */ @@ -1063,11 +1060,12 @@ static int update_mctrl(struct usb_serial_port *port, unsigned int set, unsigned int clear) { struct ftdi_private *priv = usb_get_serial_port_data(port); + struct device *dev = &port->dev; unsigned urb_value; int rv; if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0) { - dbg("%s - DTR|RTS not being set|cleared", __func__); + dev_dbg(dev, "%s - DTR|RTS not being set|cleared\n", __func__); return 0; /* no change */ } @@ -1088,18 +1086,14 @@ static int update_mctrl(struct usb_serial_port *port, unsigned int set, urb_value, priv->interface, NULL, 0, WDR_TIMEOUT); if (rv < 0) { - dbg("%s Error from MODEM_CTRL urb: DTR %s, RTS %s", - __func__, - (set & TIOCM_DTR) ? "HIGH" : - (clear & TIOCM_DTR) ? "LOW" : "unchanged", - (set & TIOCM_RTS) ? "HIGH" : - (clear & TIOCM_RTS) ? "LOW" : "unchanged"); + dev_dbg(dev, "%s Error from MODEM_CTRL urb: DTR %s, RTS %s\n", + __func__, + (set & TIOCM_DTR) ? "HIGH" : (clear & TIOCM_DTR) ? "LOW" : "unchanged", + (set & TIOCM_RTS) ? "HIGH" : (clear & TIOCM_RTS) ? "LOW" : "unchanged"); } else { - dbg("%s - DTR %s, RTS %s", __func__, - (set & TIOCM_DTR) ? "HIGH" : - (clear & TIOCM_DTR) ? "LOW" : "unchanged", - (set & TIOCM_RTS) ? "HIGH" : - (clear & TIOCM_RTS) ? "LOW" : "unchanged"); + dev_dbg(dev, "%s - DTR %s, RTS %s\n", __func__, + (set & TIOCM_DTR) ? "HIGH" : (clear & TIOCM_DTR) ? "LOW" : "unchanged", + (set & TIOCM_RTS) ? "HIGH" : (clear & TIOCM_RTS) ? "LOW" : "unchanged"); /* FIXME: locking on last_dtr_rts */ priv->last_dtr_rts = (priv->last_dtr_rts & ~clear) | set; } @@ -1111,6 +1105,7 @@ static __u32 get_ftdi_divisor(struct tty_struct *tty, struct usb_serial_port *port) { struct ftdi_private *priv = usb_get_serial_port_data(port); + struct device *dev = &port->dev; __u32 div_value = 0; int div_okay = 1; int baud; @@ -1146,7 +1141,7 @@ static __u32 get_ftdi_divisor(struct tty_struct *tty, alt_speed hack */ baud = tty_get_baud_rate(tty); - dbg("%s - tty_get_baud_rate reports speed %d", __func__, baud); + dev_dbg(dev, "%s - tty_get_baud_rate reports speed %d\n", __func__, baud); /* 2. Observe async-compatible custom_divisor hack, update baudrate if needed */ @@ -1155,8 +1150,8 @@ static __u32 get_ftdi_divisor(struct tty_struct *tty, ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) && (priv->custom_divisor)) { baud = priv->baud_base / priv->custom_divisor; - dbg("%s - custom divisor %d sets baud rate to %d", - __func__, priv->custom_divisor, baud); + dev_dbg(dev, "%s - custom divisor %d sets baud rate to %d\n", + __func__, priv->custom_divisor, baud); } /* 3. Convert baudrate to device-specific divisor */ @@ -1178,8 +1173,8 @@ static __u32 get_ftdi_divisor(struct tty_struct *tty, case 115200: div_value = ftdi_sio_b115200; break; } /* baud */ if (div_value == 0) { - dbg("%s - Baudrate (%d) requested is not supported", - __func__, baud); + dev_dbg(dev, "%s - Baudrate (%d) requested is not supported\n", + __func__, baud); div_value = ftdi_sio_b9600; baud = 9600; div_okay = 0; @@ -1189,7 +1184,7 @@ static __u32 get_ftdi_divisor(struct tty_struct *tty, if (baud <= 3000000) { div_value = ftdi_232am_baud_to_divisor(baud); } else { - dbg("%s - Baud rate too high!", __func__); + dev_dbg(dev, "%s - Baud rate too high!\n", __func__); baud = 9600; div_value = ftdi_232am_baud_to_divisor(9600); div_okay = 0; @@ -1212,7 +1207,7 @@ static __u32 get_ftdi_divisor(struct tty_struct *tty, } div_value = ftdi_232bm_baud_to_divisor(baud); } else { - dbg("%s - Baud rate too high!", __func__); + dev_dbg(dev, "%s - Baud rate too high!\n", __func__); div_value = ftdi_232bm_baud_to_divisor(9600); div_okay = 0; baud = 9600; @@ -1226,7 +1221,7 @@ static __u32 get_ftdi_divisor(struct tty_struct *tty, } else if (baud < 1200) { div_value = ftdi_232bm_baud_to_divisor(baud); } else { - dbg("%s - Baud rate too high!", __func__); + dev_dbg(dev, "%s - Baud rate too high!\n", __func__); div_value = ftdi_232bm_baud_to_divisor(9600); div_okay = 0; baud = 9600; @@ -1235,7 +1230,7 @@ static __u32 get_ftdi_divisor(struct tty_struct *tty, } /* priv->chip_type */ if (div_okay) { - dbg("%s - Baud rate set to %d (divisor 0x%lX) on chip %s", + dev_dbg(dev, "%s - Baud rate set to %d (divisor 0x%lX) on chip %s\n", __func__, baud, (unsigned long)div_value, ftdi_chip_name[priv->chip_type]); } @@ -1281,7 +1276,7 @@ static int write_latency_timer(struct usb_serial_port *port) if (priv->flags & ASYNC_LOW_LATENCY) l = 1; - dbg("%s: setting latency timer = %i", __func__, l); + dev_dbg(&port->dev, "%s: setting latency timer = %i\n", __func__, l); rv = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), @@ -1436,8 +1431,8 @@ static void ftdi_determine_type(struct usb_serial_port *port) version = le16_to_cpu(udev->descriptor.bcdDevice); interfaces = udev->actconfig->desc.bNumInterfaces; - dbg("%s: bcdDevice = 0x%x, bNumInterfaces = %u", __func__, - version, interfaces); + dev_dbg(&port->dev, "%s: bcdDevice = 0x%x, bNumInterfaces = %u\n", __func__, + version, interfaces); if (interfaces > 1) { int inter; @@ -1467,8 +1462,9 @@ static void ftdi_determine_type(struct usb_serial_port *port) /* BM-type devices have a bug where bcdDevice gets set * to 0x200 when iSerialNumber is 0. */ if (version < 0x500) { - dbg("%s: something fishy - bcdDevice too low for multi-interface device", - __func__); + dev_dbg(&port->dev, + "%s: something fishy - bcdDevice too low for multi-interface device\n", + __func__); } } else if (version < 0x200) { /* Old device. Assume it's the original SIO. */ @@ -1582,7 +1578,7 @@ static ssize_t store_event_char(struct device *dev, int v = simple_strtoul(valbuf, NULL, 10); int rv; - dbg("%s: setting event char = %i", __func__, v); + dev_dbg(&port->dev, "%s: setting event char = %i\n", __func__, v); rv = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), @@ -1591,7 +1587,7 @@ static ssize_t store_event_char(struct device *dev, v, priv->interface, NULL, 0, WDR_TIMEOUT); if (rv < 0) { - dbg("Unable to write event character: %i", rv); + dev_dbg(&port->dev, "Unable to write event character: %i\n", rv); return -EIO; } @@ -1610,7 +1606,7 @@ static int create_sysfs_attrs(struct usb_serial_port *port) /* XXX I've no idea if the original SIO supports the event_char * sysfs parameter, so I'm playing it safe. */ if (priv->chip_type != SIO) { - dbg("sysfs attributes for %s", ftdi_chip_name[priv->chip_type]); + dev_dbg(&port->dev, "sysfs attributes for %s\n", ftdi_chip_name[priv->chip_type]); retval = device_create_file(&port->dev, &dev_attr_event_char); if ((!retval) && (priv->chip_type == FT232BM || @@ -1750,8 +1746,8 @@ static int ftdi_NDI_device_setup(struct usb_serial *serial) if (latency > 99) latency = 99; - dbg("%s setting NDI device latency to %d", __func__, latency); - dev_info(&udev->dev, "NDI device with a latency value of %d", latency); + dev_dbg(&udev->dev, "%s setting NDI device latency to %d\n", __func__, latency); + dev_info(&udev->dev, "NDI device with a latency value of %d\n", latency); /* FIXME: errors are not returned */ usb_control_msg(udev, usb_sndctrlpipe(udev, 0), @@ -1969,7 +1965,7 @@ static int ftdi_process_packet(struct tty_struct *tty, char *ch; if (len < 2) { - dbg("malformed packet"); + dev_dbg(&port->dev, "malformed packet\n"); return 0; } @@ -2084,12 +2080,12 @@ static void ftdi_break_ctl(struct tty_struct *tty, int break_state) FTDI_SIO_SET_DATA_REQUEST_TYPE, urb_value , priv->interface, NULL, 0, WDR_TIMEOUT) < 0) { - dev_err(&port->dev, "%s FAILED to enable/disable break state " - "(state was %d)\n", __func__, break_state); + dev_err(&port->dev, "%s FAILED to enable/disable break state (state was %d)\n", + __func__, break_state); } - dbg("%s break state is %d - urb is %d", __func__, - break_state, urb_value); + dev_dbg(&port->dev, "%s break state is %d - urb is %d\n", __func__, + break_state, urb_value); } @@ -2101,6 +2097,7 @@ static void ftdi_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios) { struct usb_device *dev = port->serial->dev; + struct device *ddev = &port->dev; struct ftdi_private *priv = usb_get_serial_port_data(port); struct ktermios *termios = &tty->termios; unsigned int cflag = termios->c_cflag; @@ -2114,20 +2111,20 @@ static void ftdi_set_termios(struct tty_struct *tty, /* Force baud rate if this device requires it, unless it is set to B0. */ if (priv->force_baud && ((termios->c_cflag & CBAUD) != B0)) { - dbg("%s: forcing baud rate for this device", __func__); + dev_dbg(ddev, "%s: forcing baud rate for this device\n", __func__); tty_encode_baud_rate(tty, priv->force_baud, priv->force_baud); } /* Force RTS-CTS if this device requires it. */ if (priv->force_rtscts) { - dbg("%s: forcing rtscts for this device", __func__); + dev_dbg(ddev, "%s: forcing rtscts for this device\n", __func__); termios->c_cflag |= CRTSCTS; } cflag = termios->c_cflag; - if (old_termios == 0) + if (!old_termios) goto no_skip; if (old_termios->c_cflag == termios->c_cflag @@ -2163,10 +2160,16 @@ no_skip: } if (cflag & CSIZE) { switch (cflag & CSIZE) { - case CS7: urb_value |= 7; dbg("Setting CS7"); break; - case CS8: urb_value |= 8; dbg("Setting CS8"); break; + case CS7: + urb_value |= 7; + dev_dbg(ddev, "Setting CS7\n"); + break; + case CS8: + urb_value |= 8; + dev_dbg(ddev, "Setting CS8\n"); + break; default: - dev_err(&port->dev, "CSIZE was set but not CS7-CS8\n"); + dev_err(ddev, "CSIZE was set but not CS7-CS8\n"); } } @@ -2179,8 +2182,8 @@ no_skip: FTDI_SIO_SET_DATA_REQUEST_TYPE, urb_value , priv->interface, NULL, 0, WDR_SHORT_TIMEOUT) < 0) { - dev_err(&port->dev, "%s FAILED to set " - "databits/stopbits/parity\n", __func__); + dev_err(ddev, "%s FAILED to set databits/stopbits/parity\n", + __func__); } /* Now do the baudrate */ @@ -2192,8 +2195,7 @@ no_data_parity_stop_changes: FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, 0, priv->interface, NULL, 0, WDR_TIMEOUT) < 0) { - dev_err(&port->dev, - "%s error from disable flowcontrol urb\n", + dev_err(ddev, "%s error from disable flowcontrol urb\n", __func__); } /* Drop RTS and DTR */ @@ -2202,8 +2204,7 @@ no_data_parity_stop_changes: /* set the baudrate determined before */ mutex_lock(&priv->cfg_lock); if (change_speed(tty, port)) - dev_err(&port->dev, "%s urb failed to set baudrate\n", - __func__); + dev_err(ddev, "%s urb failed to set baudrate\n", __func__); mutex_unlock(&priv->cfg_lock); /* Ensure RTS and DTR are raised when baudrate changed from 0 */ if (!old_termios || (old_termios->c_cflag & CBAUD) == B0) @@ -2214,17 +2215,15 @@ no_data_parity_stop_changes: /* Note device also supports DTR/CD (ugh) and Xon/Xoff in hardware */ no_c_cflag_changes: if (cflag & CRTSCTS) { - dbg("%s Setting to CRTSCTS flow control", __func__); + dev_dbg(ddev, "%s Setting to CRTSCTS flow control\n", __func__); if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0), FTDI_SIO_SET_FLOW_CTRL_REQUEST, FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, 0 , (FTDI_SIO_RTS_CTS_HS | priv->interface), NULL, 0, WDR_TIMEOUT) < 0) { - dev_err(&port->dev, - "urb failed to set to rts/cts flow control\n"); + dev_err(ddev, "urb failed to set to rts/cts flow control\n"); } - } else { /* * Xon/Xoff code @@ -2234,8 +2233,8 @@ no_c_cflag_changes: * code is executed. */ if (iflag & IXOFF) { - dbg("%s request to enable xonxoff iflag=%04x", - __func__, iflag); + dev_dbg(ddev, "%s request to enable xonxoff iflag=%04x\n", + __func__, iflag); /* Try to enable the XON/XOFF on the ftdi_sio * Set the vstart and vstop -- could have been done up * above where a lot of other dereferencing is done but @@ -2260,18 +2259,16 @@ no_c_cflag_changes: /* else clause to only run if cflag ! CRTSCTS and iflag * ! XOFF. CHECKME Assuming XON/XOFF handled by tty * stack - not by device */ - dbg("%s Turning off hardware flow control", __func__); + dev_dbg(ddev, "%s Turning off hardware flow control\n", __func__); if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0), FTDI_SIO_SET_FLOW_CTRL_REQUEST, FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, 0, priv->interface, NULL, 0, WDR_TIMEOUT) < 0) { - dev_err(&port->dev, - "urb failed to clear flow control\n"); + dev_err(ddev, "urb failed to clear flow control\n"); } } - } } @@ -2365,7 +2362,7 @@ static int ftdi_ioctl(struct tty_struct *tty, struct async_icount cnow; struct async_icount cprev; - dbg("%s cmd 0x%04x", __func__, cmd); + dev_dbg(&port->dev, "%s cmd 0x%04x\n", __func__, cmd); /* Based on code from acm.c and others */ switch (cmd) { @@ -2413,14 +2410,13 @@ static int ftdi_ioctl(struct tty_struct *tty, /* This is not necessarily an error - turns out the higher layers * will do some ioctls themselves (see comment above) */ - dbg("%s arg not supported - it was 0x%04x - check /usr/include/asm/ioctls.h", __func__, cmd); + dev_dbg(&port->dev, "%s arg not supported - it was 0x%04x - check /usr/include/asm/ioctls.h\n", + __func__, cmd); return -ENOIOCTLCMD; } static int __init ftdi_init(void) { - int retval; - if (vendor > 0 && product > 0) { /* Add user specified VID/PID to reserved element of table. */ int i; @@ -2430,11 +2426,7 @@ static int __init ftdi_init(void) id_table_combined[i].idVendor = vendor; id_table_combined[i].idProduct = product; } - retval = usb_serial_register_drivers(serial_drivers, KBUILD_MODNAME, id_table_combined); - if (retval == 0) - printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":" - DRIVER_DESC "\n"); - return retval; + return usb_serial_register_drivers(serial_drivers, KBUILD_MODNAME, id_table_combined); } static void __exit ftdi_exit(void) @@ -2450,8 +2442,6 @@ MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); module_param(vendor, ushort, 0); MODULE_PARM_DESC(vendor, "User specified vendor ID (default=" __MODULE_STRING(FTDI_VID)")"); diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 41fe5826100c..57c12ef6625e 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -517,6 +517,11 @@ */ #define FTDI_TAVIR_STK500_PID 0xFA33 /* STK500 AVR programmer */ +/* + * TIAO product ids (FTDI_VID) + * http://www.tiaowiki.com/w/Main_Page + */ +#define FTDI_TIAO_UMPA_PID 0x8a98 /* TIAO/DIYGADGET USB Multi-Protocol Adapter */ /********************************/ diff --git a/drivers/usb/serial/funsoft.c b/drivers/usb/serial/funsoft.c index 235707961ca3..9362f8fd2385 100644 --- a/drivers/usb/serial/funsoft.c +++ b/drivers/usb/serial/funsoft.c @@ -16,8 +16,6 @@ #include <linux/usb/serial.h> #include <linux/uaccess.h> -static bool debug; - static const struct usb_device_id id_table[] = { { USB_DEVICE(0x1404, 0xcddc) }, { }, @@ -40,6 +38,3 @@ static struct usb_serial_driver * const serial_drivers[] = { module_usb_serial_driver(serial_drivers, id_table); MODULE_LICENSE("GPL"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c index 346c15a51066..3ee92648c02d 100644 --- a/drivers/usb/serial/garmin_gps.c +++ b/drivers/usb/serial/garmin_gps.c @@ -41,9 +41,6 @@ /* the mode to be set when the port ist opened */ static int initial_mode = 1; -/* debug flag */ -static bool debug; - #define GARMIN_VENDOR_ID 0x091E /* @@ -258,10 +255,7 @@ static void send_to_tty(struct usb_serial_port *port, struct tty_struct *tty = tty_port_tty_get(&port->port); if (tty && actual_length) { - - usb_serial_debug_data(debug, &port->dev, - __func__, actual_length, data); - + usb_serial_debug_data(&port->dev, __func__, actual_length, data); tty_insert_flip_string(tty, data, actual_length); tty_flip_buffer_push(tty); } @@ -303,8 +297,9 @@ static int pkt_add(struct garmin_data *garmin_data_p, state = garmin_data_p->state; spin_unlock_irqrestore(&garmin_data_p->lock, flags); - dbg("%s - added: pkt: %d - %d bytes", - __func__, pkt->seq, data_length); + dev_dbg(&garmin_data_p->port->dev, + "%s - added: pkt: %d - %d bytes\n", __func__, + pkt->seq, data_length); /* in serial mode, if someone is waiting for data from the device, convert and send the next packet to tty. */ @@ -359,7 +354,8 @@ static int gsp_send_ack(struct garmin_data *garmin_data_p, __u8 pkt_id) __u8 *ptr = pkt; unsigned l = 0; - dbg("%s - pkt-id: 0x%X.", __func__, 0xFF & pkt_id); + dev_dbg(&garmin_data_p->port->dev, "%s - pkt-id: 0x%X.\n", __func__, + 0xFF & pkt_id); *ptr++ = DLE; *ptr++ = ACK; @@ -399,20 +395,20 @@ static int gsp_send_ack(struct garmin_data *garmin_data_p, __u8 pkt_id) */ static int gsp_rec_packet(struct garmin_data *garmin_data_p, int count) { + struct device *dev = &garmin_data_p->port->dev; unsigned long flags; const __u8 *recpkt = garmin_data_p->inbuffer+GSP_INITIAL_OFFSET; __le32 *usbdata = (__le32 *) garmin_data_p->inbuffer; - int cksum = 0; int n = 0; int pktid = recpkt[0]; int size = recpkt[1]; - usb_serial_debug_data(debug, &garmin_data_p->port->dev, - __func__, count-GSP_INITIAL_OFFSET, recpkt); + usb_serial_debug_data(&garmin_data_p->port->dev, __func__, + count-GSP_INITIAL_OFFSET, recpkt); if (size != (count-GSP_INITIAL_OFFSET-3)) { - dbg("%s - invalid size, expected %d bytes, got %d", + dev_dbg(dev, "%s - invalid size, expected %d bytes, got %d\n", __func__, size, (count-GSP_INITIAL_OFFSET-3)); return -EINVPKT; } @@ -422,8 +418,8 @@ static int gsp_rec_packet(struct garmin_data *garmin_data_p, int count) /* sanity check, remove after test ... */ if ((__u8 *)&(usbdata[3]) != recpkt) { - dbg("%s - ptr mismatch %p - %p", - __func__, &(usbdata[4]), recpkt); + dev_dbg(dev, "%s - ptr mismatch %p - %p\n", __func__, + &(usbdata[4]), recpkt); return -EINVPKT; } @@ -433,7 +429,7 @@ static int gsp_rec_packet(struct garmin_data *garmin_data_p, int count) } if ((0xff & (cksum + *recpkt)) != 0) { - dbg("%s - invalid checksum, expected %02x, got %02x", + dev_dbg(dev, "%s - invalid checksum, expected %02x, got %02x\n", __func__, 0xff & -cksum, 0xff & *recpkt); return -EINVPKT; } @@ -480,6 +476,7 @@ static int gsp_rec_packet(struct garmin_data *garmin_data_p, int count) static int gsp_receive(struct garmin_data *garmin_data_p, const unsigned char *buf, int count) { + struct device *dev = &garmin_data_p->port->dev; unsigned long flags; int offs = 0; int ack_or_nak_seen = 0; @@ -500,7 +497,7 @@ static int gsp_receive(struct garmin_data *garmin_data_p, skip = garmin_data_p->flags & FLAGS_GSP_SKIP; spin_unlock_irqrestore(&garmin_data_p->lock, flags); - /* dbg("%s - dle=%d skip=%d size=%d count=%d", + /* dev_dbg(dev, "%s - dle=%d skip=%d size=%d count=%d\n", __func__, dleSeen, skip, size, count); */ if (size == 0) @@ -530,12 +527,12 @@ static int gsp_receive(struct garmin_data *garmin_data_p, if (data == ACK) { ack_or_nak_seen = ACK; - dbg("ACK packet complete."); + dev_dbg(dev, "ACK packet complete.\n"); } else if (data == NAK) { ack_or_nak_seen = NAK; - dbg("NAK packet complete."); + dev_dbg(dev, "NAK packet complete.\n"); } else { - dbg("packet complete - id=0x%X.", + dev_dbg(dev, "packet complete - id=0x%X.\n", 0xFF & data); gsp_rec_packet(garmin_data_p, size); } @@ -557,7 +554,7 @@ static int gsp_receive(struct garmin_data *garmin_data_p, } if (size >= GPS_IN_BUFSIZ) { - dbg("%s - packet too large.", __func__); + dev_dbg(dev, "%s - packet too large.\n", __func__); skip = 1; size = GSP_INITIAL_OFFSET; dleSeen = 0; @@ -602,6 +599,7 @@ static int gsp_receive(struct garmin_data *garmin_data_p, static int gsp_send(struct garmin_data *garmin_data_p, const unsigned char *buf, int count) { + struct device *dev = &garmin_data_p->port->dev; const unsigned char *src; unsigned char *dst; int pktid = 0; @@ -610,12 +608,12 @@ static int gsp_send(struct garmin_data *garmin_data_p, int i = 0; int k; - dbg("%s - state %d - %d bytes.", __func__, - garmin_data_p->state, count); + dev_dbg(dev, "%s - state %d - %d bytes.\n", __func__, + garmin_data_p->state, count); k = garmin_data_p->outsize; if ((k+count) > GPS_OUT_BUFSIZ) { - dbg("packet too large"); + dev_dbg(dev, "packet too large\n"); garmin_data_p->outsize = 0; return -4; } @@ -634,28 +632,28 @@ static int gsp_send(struct garmin_data *garmin_data_p, return 0; } - dbg("%s - %d bytes in buffer, %d bytes in pkt.", __func__, k, i); + dev_dbg(dev, "%s - %d bytes in buffer, %d bytes in pkt.\n", __func__, k, i); /* garmin_data_p->outbuffer now contains a complete packet */ - usb_serial_debug_data(debug, &garmin_data_p->port->dev, - __func__, k, garmin_data_p->outbuffer); + usb_serial_debug_data(&garmin_data_p->port->dev, __func__, k, + garmin_data_p->outbuffer); garmin_data_p->outsize = 0; if (GARMIN_LAYERID_APPL != getLayerId(garmin_data_p->outbuffer)) { - dbg("not an application packet (%d)", + dev_dbg(dev, "not an application packet (%d)\n", getLayerId(garmin_data_p->outbuffer)); return -1; } if (pktid > 255) { - dbg("packet-id %d too large", pktid); + dev_dbg(dev, "packet-id %d too large\n", pktid); return -2; } if (datalen > 255) { - dbg("packet-size %d too large", datalen); + dev_dbg(dev, "packet-size %d too large\n", datalen); return -3; } @@ -722,7 +720,7 @@ static int gsp_next_packet(struct garmin_data *garmin_data_p) struct garmin_packet *pkt = NULL; while ((pkt = pkt_pop(garmin_data_p)) != NULL) { - dbg("%s - next pkt: %d", __func__, pkt->seq); + dev_dbg(&garmin_data_p->port->dev, "%s - next pkt: %d\n", __func__, pkt->seq); result = gsp_send(garmin_data_p, pkt->data, pkt->size); if (result > 0) { kfree(pkt); @@ -768,7 +766,9 @@ static int nat_receive(struct garmin_data *garmin_data_p, if (len >= GPS_IN_BUFSIZ) { /* seems to be an invalid packet, ignore rest of input */ - dbg("%s - packet size too large: %d", __func__, len); + dev_dbg(&garmin_data_p->port->dev, + "%s - packet size too large: %d\n", + __func__, len); garmin_data_p->insize = 0; count = 0; result = -EINVPKT; @@ -849,10 +849,10 @@ static int process_resetdev_request(struct usb_serial_port *port) spin_unlock_irqrestore(&garmin_data_p->lock, flags); usb_kill_urb(port->interrupt_in_urb); - dbg("%s - usb_reset_device", __func__); + dev_dbg(&port->dev, "%s - usb_reset_device\n", __func__); status = usb_reset_device(port->serial->dev); if (status) - dbg("%s - usb_reset_device failed: %d", + dev_dbg(&port->dev, "%s - usb_reset_device failed: %d\n", __func__, status); return status; } @@ -889,7 +889,7 @@ static int garmin_init_session(struct usb_serial_port *port) if (status == 0) { usb_kill_urb(port->interrupt_in_urb); - dbg("%s - adding interrupt input", __func__); + dev_dbg(&serial->dev->dev, "%s - adding interrupt input\n", __func__); status = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); if (status) dev_err(&serial->dev->dev, @@ -902,7 +902,7 @@ static int garmin_init_session(struct usb_serial_port *port) * gpsbabel/jeeps/gpslibusb.c gusb_reset_toggles() */ if (status == 0) { - dbg("%s - starting session ...", __func__); + dev_dbg(&serial->dev->dev, "%s - starting session ...\n", __func__); garmin_data_p->state = STATE_ACTIVE; for (i = 0; i < 3; i++) { @@ -952,8 +952,8 @@ static void garmin_close(struct usb_serial_port *port) struct usb_serial *serial = port->serial; struct garmin_data *garmin_data_p = usb_get_serial_port_data(port); - dbg("%s - port %d - mode=%d state=%d flags=0x%X", __func__, - port->number, garmin_data_p->mode, + dev_dbg(&port->dev, "%s - port %d - mode=%d state=%d flags=0x%X\n", + __func__, port->number, garmin_data_p->mode, garmin_data_p->state, garmin_data_p->flags); if (!serial) @@ -1032,7 +1032,7 @@ static int garmin_write_bulk(struct usb_serial_port *port, memcpy(buffer, buf, count); - usb_serial_debug_data(debug, &port->dev, __func__, count, buffer); + usb_serial_debug_data(&port->dev, __func__, count, buffer); usb_fill_bulk_urb(urb, serial->dev, usb_sndbulkpipe(serial->dev, @@ -1073,11 +1073,12 @@ static int garmin_write_bulk(struct usb_serial_port *port, static int garmin_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count) { + struct device *dev = &port->dev; int pktid, pktsiz, len; struct garmin_data *garmin_data_p = usb_get_serial_port_data(port); __le32 *privpkt = (__le32 *)garmin_data_p->privpkt; - usb_serial_debug_data(debug, &port->dev, __func__, count, buf); + usb_serial_debug_data(dev, __func__, count, buf); if (garmin_data_p->state == STATE_RESET) return -EIO; @@ -1097,27 +1098,18 @@ static int garmin_write(struct tty_struct *tty, struct usb_serial_port *port, && GARMIN_LAYERID_PRIVATE == getLayerId(garmin_data_p->privpkt)) { - dbg("%s - processing private request %d", + dev_dbg(dev, "%s - processing private request %d\n", __func__, pktid); /* drop all unfinished transfers */ garmin_clear(garmin_data_p); switch (pktid) { - - case PRIV_PKTID_SET_DEBUG: - if (pktsiz != 4) - return -EINVPKT; - debug = __le32_to_cpu(privpkt[3]); - dbg("%s - debug level set to 0x%X", - __func__, debug); - break; - case PRIV_PKTID_SET_MODE: if (pktsiz != 4) return -EINVPKT; garmin_data_p->mode = __le32_to_cpu(privpkt[3]); - dbg("%s - mode set to %d", + dev_dbg(dev, "%s - mode set to %d\n", __func__, garmin_data_p->mode); break; @@ -1133,7 +1125,7 @@ static int garmin_write(struct tty_struct *tty, struct usb_serial_port *port, if (pktsiz != 4) return -EINVPKT; initial_mode = __le32_to_cpu(privpkt[3]); - dbg("%s - initial_mode set to %d", + dev_dbg(dev, "%s - initial_mode set to %d\n", __func__, garmin_data_p->mode); break; @@ -1169,7 +1161,7 @@ static void garmin_read_process(struct garmin_data *garmin_data_p, if (garmin_data_p->flags & FLAGS_DROP_DATA) { /* abort-transfer cmd is actice */ - dbg("%s - pkt dropped", __func__); + dev_dbg(&garmin_data_p->port->dev, "%s - pkt dropped\n", __func__); } else if (garmin_data_p->state != STATE_DISCONNECTED && garmin_data_p->state != STATE_RESET) { @@ -1178,7 +1170,7 @@ static void garmin_read_process(struct garmin_data *garmin_data_p, send it directly to the tty port */ if (garmin_data_p->flags & FLAGS_QUEUING) { pkt_add(garmin_data_p, data, data_length); - } else if (bulk_data || + } else if (bulk_data || getLayerId(data) == GARMIN_LAYERID_APPL) { spin_lock_irqsave(&garmin_data_p->lock, flags); @@ -1208,18 +1200,17 @@ static void garmin_read_bulk_callback(struct urb *urb) int retval; if (!serial) { - dbg("%s - bad serial pointer, exiting", __func__); + dev_dbg(&urb->dev->dev, "%s - bad serial pointer, exiting\n", __func__); return; } if (status) { - dbg("%s - nonzero read bulk status received: %d", + dev_dbg(&urb->dev->dev, "%s - nonzero read bulk status received: %d\n", __func__, status); return; } - usb_serial_debug_data(debug, &port->dev, - __func__, urb->actual_length, data); + usb_serial_debug_data(&port->dev, __func__, urb->actual_length, data); garmin_read_process(garmin_data_p, data, urb->actual_length, 1); @@ -1239,11 +1230,11 @@ static void garmin_read_bulk_callback(struct urb *urb) retval = usb_submit_urb(port->read_urb, GFP_ATOMIC); if (retval) dev_err(&port->dev, - "%s - failed resubmitting read urb, " - "error %d\n", __func__, retval); + "%s - failed resubmitting read urb, error %d\n", + __func__, retval); } } else { - dbg("%s - end of bulk data", __func__); + dev_dbg(&port->dev, "%s - end of bulk data\n", __func__); spin_lock_irqsave(&garmin_data_p->lock, flags); garmin_data_p->flags &= ~FLAGS_BULK_IN_ACTIVE; spin_unlock_irqrestore(&garmin_data_p->lock, flags); @@ -1268,23 +1259,23 @@ static void garmin_read_int_callback(struct urb *urb) case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", + dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d\n", __func__, status); return; default: - dbg("%s - nonzero urb status received: %d", + dev_dbg(&urb->dev->dev, "%s - nonzero urb status received: %d\n", __func__, status); return; } - usb_serial_debug_data(debug, &port->dev, __func__, - urb->actual_length, urb->transfer_buffer); + usb_serial_debug_data(&port->dev, __func__, urb->actual_length, + urb->transfer_buffer); if (urb->actual_length == sizeof(GARMIN_BULK_IN_AVAIL_REPLY) && 0 == memcmp(data, GARMIN_BULK_IN_AVAIL_REPLY, sizeof(GARMIN_BULK_IN_AVAIL_REPLY))) { - dbg("%s - bulk data available.", __func__); + dev_dbg(&port->dev, "%s - bulk data available.\n", __func__); if (0 == (garmin_data_p->flags & FLAGS_BULK_IN_ACTIVE)) { @@ -1319,7 +1310,7 @@ static void garmin_read_int_callback(struct urb *urb) garmin_data_p->serial_num = __le32_to_cpup( (__le32 *)(data+GARMIN_PKTHDR_LENGTH)); - dbg("%s - start-of-session reply seen - serial %u.", + dev_dbg(&port->dev, "%s - start-of-session reply seen - serial %u.\n", __func__, garmin_data_p->serial_num); } @@ -1495,7 +1486,5 @@ MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); -module_param(debug, bool, S_IWUSR | S_IRUGO); -MODULE_PARM_DESC(debug, "Debug enabled or not"); module_param(initial_mode, int, S_IRUGO); MODULE_PARM_DESC(initial_mode, "Initial mode"); diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index 9b026bf7afef..296612153ea2 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -24,8 +24,6 @@ #include <linux/kfifo.h> #include <linux/serial.h> -static int debug; - #ifdef CONFIG_USB_SERIAL_GENERIC static __u16 vendor = 0x05f9; @@ -60,11 +58,10 @@ static struct usb_serial_driver * const serial_drivers[] = { #endif -int usb_serial_generic_register(int _debug) +int usb_serial_generic_register(void) { int retval = 0; - debug = _debug; #ifdef CONFIG_USB_SERIAL_GENERIC generic_device_ids[0].idVendor = vendor; generic_device_ids[0].idProduct = product; @@ -171,8 +168,7 @@ retry: urb->transfer_buffer, port->bulk_out_size); urb->transfer_buffer_length = count; - usb_serial_debug_data(debug, &port->dev, __func__, count, - urb->transfer_buffer); + usb_serial_debug_data(&port->dev, __func__, count, urb->transfer_buffer); spin_lock_irqsave(&port->lock, flags); port->tx_bytes += count; spin_unlock_irqrestore(&port->lock, flags); @@ -365,8 +361,7 @@ void usb_serial_generic_read_bulk_callback(struct urb *urb) return; } - usb_serial_debug_data(debug, &port->dev, __func__, - urb->actual_length, data); + usb_serial_debug_data(&port->dev, __func__, urb->actual_length, data); port->serial->type->process_read_urb(urb); /* Throttle the device if requested by tty */ diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index f435575c4e6e..8e6faaf3580c 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -190,9 +190,6 @@ static const struct divisor_table_entry divisor_table[] = { { 230400, 1}, }; -/* local variables */ -static bool debug; - /* Number of outstanding Command Write Urbs */ static atomic_t CmdUrbs = ATOMIC_INIT(0); @@ -244,7 +241,7 @@ static void handle_new_lsr(struct edgeport_port *edge_port, __u8 lsrData, __u8 lsr, __u8 data); static int send_iosp_ext_cmd(struct edgeport_port *edge_port, __u8 command, __u8 param); -static int calc_baud_rate_divisor(int baud_rate, int *divisor); +static int calc_baud_rate_divisor(struct device *dev, int baud_rate, int *divisor); static int send_cmd_write_baud_rate(struct edgeport_port *edge_port, int baudRate); static void change_port_settings(struct tty_struct *tty, @@ -286,6 +283,7 @@ static void unicode_to_ascii(char *string, int buflen, ************************************************************************/ static void update_edgeport_E2PROM(struct edgeport_serial *edge_serial) { + struct device *dev = &edge_serial->serial->dev->dev; __u32 BootCurVer; __u32 BootNewVer; __u8 BootMajorVersion; @@ -311,7 +309,7 @@ static void update_edgeport_E2PROM(struct edgeport_serial *edge_serial) response = request_ihex_firmware(&fw, fw_name, &edge_serial->serial->dev->dev); if (response) { - printk(KERN_ERR "Failed to load image \"%s\" err %d\n", + dev_err(dev, "Failed to load image \"%s\" err %d\n", fw_name, response); return; } @@ -330,20 +328,20 @@ static void update_edgeport_E2PROM(struct edgeport_serial *edge_serial) (BootMinorVersion << 16) + BootBuildNumber; - dbg("Current Boot Image version %d.%d.%d", + dev_dbg(dev, "Current Boot Image version %d.%d.%d\n", edge_serial->boot_descriptor.MajorVersion, edge_serial->boot_descriptor.MinorVersion, le16_to_cpu(edge_serial->boot_descriptor.BuildNumber)); if (BootNewVer > BootCurVer) { - dbg("**Update Boot Image from %d.%d.%d to %d.%d.%d", + dev_dbg(dev, "**Update Boot Image from %d.%d.%d to %d.%d.%d\n", edge_serial->boot_descriptor.MajorVersion, edge_serial->boot_descriptor.MinorVersion, le16_to_cpu(edge_serial->boot_descriptor.BuildNumber), BootMajorVersion, BootMinorVersion, BootBuildNumber); - dbg("Downloading new Boot Image"); + dev_dbg(dev, "Downloading new Boot Image\n"); for (rec = ihex_next_binrec(rec); rec; rec = ihex_next_binrec(rec)) { @@ -362,7 +360,7 @@ static void update_edgeport_E2PROM(struct edgeport_serial *edge_serial) } } } else { - dbg("Boot Image -- already up to date"); + dev_dbg(dev, "Boot Image -- already up to date\n"); } release_firmware(fw); } @@ -379,7 +377,7 @@ static int get_string_desc(struct usb_device *dev, int Id, struct usb_string_descriptor StringDesc; struct usb_string_descriptor *pStringDesc; - dbg("%s - USB String ID = %d", __func__, Id); + dev_dbg(&dev->dev, "%s - USB String ID = %d\n", __func__, Id); if (!usb_get_descriptor(dev, USB_DT_STRING, Id, &StringDesc, sizeof(StringDesc))) @@ -400,34 +398,39 @@ static int get_string_desc(struct usb_device *dev, int Id, } #endif -static void dump_product_info(struct edgeport_product_info *product_info) +static void dump_product_info(struct edgeport_serial *edge_serial, + struct edgeport_product_info *product_info) { + struct device *dev = &edge_serial->serial->dev->dev; + /* Dump Product Info structure */ - dbg("**Product Information:"); - dbg(" ProductId %x", product_info->ProductId); - dbg(" NumPorts %d", product_info->NumPorts); - dbg(" ProdInfoVer %d", product_info->ProdInfoVer); - dbg(" IsServer %d", product_info->IsServer); - dbg(" IsRS232 %d", product_info->IsRS232); - dbg(" IsRS422 %d", product_info->IsRS422); - dbg(" IsRS485 %d", product_info->IsRS485); - dbg(" RomSize %d", product_info->RomSize); - dbg(" RamSize %d", product_info->RamSize); - dbg(" CpuRev %x", product_info->CpuRev); - dbg(" BoardRev %x", product_info->BoardRev); - dbg(" BootMajorVersion %d.%d.%d", product_info->BootMajorVersion, - product_info->BootMinorVersion, - le16_to_cpu(product_info->BootBuildNumber)); - dbg(" FirmwareMajorVersion %d.%d.%d", - product_info->FirmwareMajorVersion, - product_info->FirmwareMinorVersion, - le16_to_cpu(product_info->FirmwareBuildNumber)); - dbg(" ManufactureDescDate %d/%d/%d", - product_info->ManufactureDescDate[0], - product_info->ManufactureDescDate[1], - product_info->ManufactureDescDate[2]+1900); - dbg(" iDownloadFile 0x%x", product_info->iDownloadFile); - dbg(" EpicVer %d", product_info->EpicVer); + dev_dbg(dev, "**Product Information:\n"); + dev_dbg(dev, " ProductId %x\n", product_info->ProductId); + dev_dbg(dev, " NumPorts %d\n", product_info->NumPorts); + dev_dbg(dev, " ProdInfoVer %d\n", product_info->ProdInfoVer); + dev_dbg(dev, " IsServer %d\n", product_info->IsServer); + dev_dbg(dev, " IsRS232 %d\n", product_info->IsRS232); + dev_dbg(dev, " IsRS422 %d\n", product_info->IsRS422); + dev_dbg(dev, " IsRS485 %d\n", product_info->IsRS485); + dev_dbg(dev, " RomSize %d\n", product_info->RomSize); + dev_dbg(dev, " RamSize %d\n", product_info->RamSize); + dev_dbg(dev, " CpuRev %x\n", product_info->CpuRev); + dev_dbg(dev, " BoardRev %x\n", product_info->BoardRev); + dev_dbg(dev, " BootMajorVersion %d.%d.%d\n", + product_info->BootMajorVersion, + product_info->BootMinorVersion, + le16_to_cpu(product_info->BootBuildNumber)); + dev_dbg(dev, " FirmwareMajorVersion %d.%d.%d\n", + product_info->FirmwareMajorVersion, + product_info->FirmwareMinorVersion, + le16_to_cpu(product_info->FirmwareBuildNumber)); + dev_dbg(dev, " ManufactureDescDate %d/%d/%d\n", + product_info->ManufactureDescDate[0], + product_info->ManufactureDescDate[1], + product_info->ManufactureDescDate[2]+1900); + dev_dbg(dev, " iDownloadFile 0x%x\n", + product_info->iDownloadFile); + dev_dbg(dev, " EpicVer %d\n", product_info->EpicVer); } static void get_product_info(struct edgeport_serial *edge_serial) @@ -462,7 +465,7 @@ static void get_product_info(struct edgeport_serial *edge_serial) product_info->iDownloadFile = EDGE_DOWNLOAD_FILE_80251; else product_info->iDownloadFile = EDGE_DOWNLOAD_FILE_I930; - + /* Determine Product type and set appropriate flags */ switch (DEVICE_ID_FROM_USB_PRODUCT_ID(product_info->ProductId)) { case ION_DEVICE_ID_EDGEPORT_COMPATIBLE: @@ -490,7 +493,7 @@ static void get_product_info(struct edgeport_serial *edge_serial) break; } - dump_product_info(product_info); + dump_product_info(edge_serial, product_info); } static int get_epic_descriptor(struct edgeport_serial *ep) @@ -500,6 +503,7 @@ static int get_epic_descriptor(struct edgeport_serial *ep) struct edgeport_product_info *product_info = &ep->product_info; struct edge_compatibility_descriptor *epic = &ep->epic_descriptor; struct edge_compatibility_bits *bits; + struct device *dev = &serial->dev->dev; ep->is_epic = 0; result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), @@ -509,8 +513,6 @@ static int get_epic_descriptor(struct edgeport_serial *ep) sizeof(struct edge_compatibility_descriptor), 300); - dbg("%s result = %d", __func__, result); - if (result > 0) { ep->is_epic = 1; memset(product_info, 0, sizeof(struct edgeport_product_info)); @@ -524,23 +526,23 @@ static int get_epic_descriptor(struct edgeport_serial *ep) product_info->EpicVer = epic->EpicVer; product_info->Epic = epic->Supports; product_info->ProductId = ION_DEVICE_ID_EDGEPORT_COMPATIBLE; - dump_product_info(product_info); + dump_product_info(ep, product_info); bits = &ep->epic_descriptor.Supports; - dbg("**EPIC descriptor:"); - dbg(" VendEnableSuspend: %s", bits->VendEnableSuspend ? "TRUE": "FALSE"); - dbg(" IOSPOpen : %s", bits->IOSPOpen ? "TRUE": "FALSE"); - dbg(" IOSPClose : %s", bits->IOSPClose ? "TRUE": "FALSE"); - dbg(" IOSPChase : %s", bits->IOSPChase ? "TRUE": "FALSE"); - dbg(" IOSPSetRxFlow : %s", bits->IOSPSetRxFlow ? "TRUE": "FALSE"); - dbg(" IOSPSetTxFlow : %s", bits->IOSPSetTxFlow ? "TRUE": "FALSE"); - dbg(" IOSPSetXChar : %s", bits->IOSPSetXChar ? "TRUE": "FALSE"); - dbg(" IOSPRxCheck : %s", bits->IOSPRxCheck ? "TRUE": "FALSE"); - dbg(" IOSPSetClrBreak : %s", bits->IOSPSetClrBreak ? "TRUE": "FALSE"); - dbg(" IOSPWriteMCR : %s", bits->IOSPWriteMCR ? "TRUE": "FALSE"); - dbg(" IOSPWriteLCR : %s", bits->IOSPWriteLCR ? "TRUE": "FALSE"); - dbg(" IOSPSetBaudRate : %s", bits->IOSPSetBaudRate ? "TRUE": "FALSE"); - dbg(" TrueEdgeport : %s", bits->TrueEdgeport ? "TRUE": "FALSE"); + dev_dbg(dev, "**EPIC descriptor:\n"); + dev_dbg(dev, " VendEnableSuspend: %s\n", bits->VendEnableSuspend ? "TRUE": "FALSE"); + dev_dbg(dev, " IOSPOpen : %s\n", bits->IOSPOpen ? "TRUE": "FALSE"); + dev_dbg(dev, " IOSPClose : %s\n", bits->IOSPClose ? "TRUE": "FALSE"); + dev_dbg(dev, " IOSPChase : %s\n", bits->IOSPChase ? "TRUE": "FALSE"); + dev_dbg(dev, " IOSPSetRxFlow : %s\n", bits->IOSPSetRxFlow ? "TRUE": "FALSE"); + dev_dbg(dev, " IOSPSetTxFlow : %s\n", bits->IOSPSetTxFlow ? "TRUE": "FALSE"); + dev_dbg(dev, " IOSPSetXChar : %s\n", bits->IOSPSetXChar ? "TRUE": "FALSE"); + dev_dbg(dev, " IOSPRxCheck : %s\n", bits->IOSPRxCheck ? "TRUE": "FALSE"); + dev_dbg(dev, " IOSPSetClrBreak : %s\n", bits->IOSPSetClrBreak ? "TRUE": "FALSE"); + dev_dbg(dev, " IOSPWriteMCR : %s\n", bits->IOSPWriteMCR ? "TRUE": "FALSE"); + dev_dbg(dev, " IOSPWriteLCR : %s\n", bits->IOSPWriteLCR ? "TRUE": "FALSE"); + dev_dbg(dev, " IOSPSetBaudRate : %s\n", bits->IOSPSetBaudRate ? "TRUE": "FALSE"); + dev_dbg(dev, " TrueEdgeport : %s\n", bits->TrueEdgeport ? "TRUE": "FALSE"); } return result; @@ -561,7 +563,8 @@ static int get_epic_descriptor(struct edgeport_serial *ep) *****************************************************************************/ static void edge_interrupt_callback(struct urb *urb) { - struct edgeport_serial *edge_serial = urb->context; + struct edgeport_serial *edge_serial = urb->context; + struct device *dev; struct edgeport_port *edge_port; struct usb_serial_port *port; struct tty_struct *tty; @@ -574,8 +577,6 @@ static void edge_interrupt_callback(struct urb *urb) int result; int status = urb->status; - dbg("%s", __func__); - switch (status) { case 0: /* success */ @@ -584,36 +585,42 @@ static void edge_interrupt_callback(struct urb *urb) case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", - __func__, status); + dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d\n", __func__, status); return; default: - dbg("%s - nonzero urb status received: %d", __func__, status); + dev_dbg(&urb->dev->dev, "%s - nonzero urb status received: %d\n", __func__, status); goto exit; } + dev = &edge_serial->serial->dev->dev; + /* process this interrupt-read even if there are no ports open */ if (length) { - usb_serial_debug_data(debug, &edge_serial->serial->dev->dev, - __func__, length, data); + usb_serial_debug_data(dev, __func__, length, data); if (length > 1) { bytes_avail = data[0] | (data[1] << 8); if (bytes_avail) { spin_lock(&edge_serial->es_lock); edge_serial->rxBytesAvail += bytes_avail; - dbg("%s - bytes_avail=%d, rxBytesAvail=%d, read_in_progress=%d", __func__, bytes_avail, edge_serial->rxBytesAvail, edge_serial->read_in_progress); + dev_dbg(dev, + "%s - bytes_avail=%d, rxBytesAvail=%d, read_in_progress=%d\n", + __func__, bytes_avail, + edge_serial->rxBytesAvail, + edge_serial->read_in_progress); if (edge_serial->rxBytesAvail > 0 && !edge_serial->read_in_progress) { - dbg("%s - posting a read", __func__); + dev_dbg(dev, "%s - posting a read\n", __func__); edge_serial->read_in_progress = true; /* we have pending bytes on the bulk in pipe, send a request */ result = usb_submit_urb(edge_serial->read_urb, GFP_ATOMIC); if (result) { - dev_err(&edge_serial->serial->dev->dev, "%s - usb_submit_urb(read bulk) failed with result = %d\n", __func__, result); + dev_err(dev, + "%s - usb_submit_urb(read bulk) failed with result = %d\n", + __func__, result); edge_serial->read_in_progress = false; } } @@ -633,9 +640,9 @@ static void edge_interrupt_callback(struct urb *urb) spin_lock(&edge_port->ep_lock); edge_port->txCredits += txCredits; spin_unlock(&edge_port->ep_lock); - dbg("%s - txcredits for port%d = %d", - __func__, portNumber, - edge_port->txCredits); + dev_dbg(dev, "%s - txcredits for port%d = %d\n", + __func__, portNumber, + edge_port->txCredits); /* tell the tty driver that something has changed */ @@ -673,49 +680,48 @@ exit: static void edge_bulk_in_callback(struct urb *urb) { struct edgeport_serial *edge_serial = urb->context; + struct device *dev; unsigned char *data = urb->transfer_buffer; int retval; __u16 raw_data_length; int status = urb->status; - dbg("%s", __func__); - if (status) { - dbg("%s - nonzero read bulk status received: %d", - __func__, status); + dev_dbg(&urb->dev->dev, "%s - nonzero read bulk status received: %d\n", + __func__, status); edge_serial->read_in_progress = false; return; } if (urb->actual_length == 0) { - dbg("%s - read bulk callback with no data", __func__); + dev_dbg(&urb->dev->dev, "%s - read bulk callback with no data\n", __func__); edge_serial->read_in_progress = false; return; } + dev = &edge_serial->serial->dev->dev; raw_data_length = urb->actual_length; - usb_serial_debug_data(debug, &edge_serial->serial->dev->dev, - __func__, raw_data_length, data); + usb_serial_debug_data(dev, __func__, raw_data_length, data); spin_lock(&edge_serial->es_lock); /* decrement our rxBytes available by the number that we just got */ edge_serial->rxBytesAvail -= raw_data_length; - dbg("%s - Received = %d, rxBytesAvail %d", __func__, - raw_data_length, edge_serial->rxBytesAvail); + dev_dbg(dev, "%s - Received = %d, rxBytesAvail %d\n", __func__, + raw_data_length, edge_serial->rxBytesAvail); process_rcvd_data(edge_serial, data, urb->actual_length); /* check to see if there's any more data for us to read */ if (edge_serial->rxBytesAvail > 0) { - dbg("%s - posting a read", __func__); + dev_dbg(dev, "%s - posting a read\n", __func__); retval = usb_submit_urb(edge_serial->read_urb, GFP_ATOMIC); if (retval) { - dev_err(&urb->dev->dev, - "%s - usb_submit_urb(read bulk) failed, " - "retval = %d\n", __func__, retval); + dev_err(dev, + "%s - usb_submit_urb(read bulk) failed, retval = %d\n", + __func__, retval); edge_serial->read_in_progress = false; } } else { @@ -737,11 +743,10 @@ static void edge_bulk_out_data_callback(struct urb *urb) struct tty_struct *tty; int status = urb->status; - dbg("%s", __func__); - if (status) { - dbg("%s - nonzero write bulk status received: %d", - __func__, status); + dev_dbg(&urb->dev->dev, + "%s - nonzero write bulk status received: %d\n", + __func__, status); } tty = tty_port_tty_get(&edge_port->port->port); @@ -773,11 +778,9 @@ static void edge_bulk_out_cmd_callback(struct urb *urb) struct tty_struct *tty; int status = urb->status; - dbg("%s", __func__); - atomic_dec(&CmdUrbs); - dbg("%s - FREE URB %p (outstanding %d)", __func__, - urb, atomic_read(&CmdUrbs)); + dev_dbg(&urb->dev->dev, "%s - FREE URB %p (outstanding %d)\n", + __func__, urb, atomic_read(&CmdUrbs)); /* clean up the transfer buffer */ @@ -787,8 +790,9 @@ static void edge_bulk_out_cmd_callback(struct urb *urb) usb_free_urb(urb); if (status) { - dbg("%s - nonzero write bulk status received: %d", - __func__, status); + dev_dbg(&urb->dev->dev, + "%s - nonzero write bulk status received: %d\n", + __func__, status); return; } @@ -819,12 +823,11 @@ static void edge_bulk_out_cmd_callback(struct urb *urb) static int edge_open(struct tty_struct *tty, struct usb_serial_port *port) { struct edgeport_port *edge_port = usb_get_serial_port_data(port); + struct device *dev = &port->dev; struct usb_serial *serial; struct edgeport_serial *edge_serial; int response; - dbg("%s - port %d", __func__, port->number); - if (edge_port == NULL) return -ENODEV; @@ -875,9 +878,8 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port) response = usb_submit_urb(edge_serial->interrupt_read_urb, GFP_KERNEL); if (response) { - dev_err(&port->dev, - "%s - Error %d submitting control urb\n", - __func__, response); + dev_err(dev, "%s - Error %d submitting control urb\n", + __func__, response); } } @@ -902,8 +904,7 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port) response = send_iosp_ext_cmd(edge_port, IOSP_CMD_OPEN_PORT, 0); if (response < 0) { - dev_err(&port->dev, "%s - error sending open port command\n", - __func__); + dev_err(dev, "%s - error sending open port command\n", __func__); edge_port->openPending = false; return -ENODEV; } @@ -914,7 +915,7 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port) if (!edge_port->open) { /* open timed out */ - dbg("%s - open timedout", __func__); + dev_dbg(dev, "%s - open timedout\n", __func__); edge_port->openPending = false; return -ENODEV; } @@ -927,7 +928,7 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port) edge_port->txfifo.fifo = kmalloc(edge_port->maxTxCredits, GFP_KERNEL); if (!edge_port->txfifo.fifo) { - dbg("%s - no memory", __func__); + dev_dbg(dev, "%s - no memory\n", __func__); edge_close(port); return -ENOMEM; } @@ -937,15 +938,13 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port) edge_port->write_in_progress = false; if (!edge_port->write_urb) { - dbg("%s - no memory", __func__); + dev_dbg(dev, "%s - no memory\n", __func__); edge_close(port); return -ENOMEM; } - dbg("%s(%d) - Initialize TX fifo to %d bytes", - __func__, port->number, edge_port->maxTxCredits); - - dbg("%s exited", __func__); + dev_dbg(dev, "%s(%d) - Initialize TX fifo to %d bytes\n", + __func__, port->number, edge_port->maxTxCredits); return 0; } @@ -963,6 +962,7 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port) ************************************************************************/ static void block_until_chase_response(struct edgeport_port *edge_port) { + struct device *dev = &edge_port->port->dev; DEFINE_WAIT(wait); __u16 lastCredits; int timeout = 1*HZ; @@ -974,11 +974,11 @@ static void block_until_chase_response(struct edgeport_port *edge_port) /* Did we get our Chase response */ if (!edge_port->chaseResponsePending) { - dbg("%s - Got Chase Response", __func__); + dev_dbg(dev, "%s - Got Chase Response\n", __func__); /* did we get all of our credit back? */ if (edge_port->txCredits == edge_port->maxTxCredits) { - dbg("%s - Got all credits", __func__); + dev_dbg(dev, "%s - Got all credits\n", __func__); return; } } @@ -994,12 +994,12 @@ static void block_until_chase_response(struct edgeport_port *edge_port) loop--; if (loop == 0) { edge_port->chaseResponsePending = false; - dbg("%s - Chase TIMEOUT", __func__); + dev_dbg(dev, "%s - Chase TIMEOUT\n", __func__); return; } } else { /* Reset timeout value back to 10 seconds */ - dbg("%s - Last %d, Current %d", __func__, + dev_dbg(dev, "%s - Last %d, Current %d\n", __func__, lastCredits, edge_port->txCredits); loop = 10; } @@ -1019,6 +1019,7 @@ static void block_until_chase_response(struct edgeport_port *edge_port) ************************************************************************/ static void block_until_tx_empty(struct edgeport_port *edge_port) { + struct device *dev = &edge_port->port->dev; DEFINE_WAIT(wait); struct TxFifo *fifo = &edge_port->txfifo; __u32 lastCount; @@ -1031,7 +1032,7 @@ static void block_until_tx_empty(struct edgeport_port *edge_port) /* Is the Edgeport Buffer empty? */ if (lastCount == 0) { - dbg("%s - TX Buffer Empty", __func__); + dev_dbg(dev, "%s - TX Buffer Empty\n", __func__); return; } @@ -1041,13 +1042,13 @@ static void block_until_tx_empty(struct edgeport_port *edge_port) schedule_timeout(timeout); finish_wait(&edge_port->wait_chase, &wait); - dbg("%s wait", __func__); + dev_dbg(dev, "%s wait\n", __func__); if (lastCount == fifo->count) { /* No activity.. count down. */ loop--; if (loop == 0) { - dbg("%s - TIMEOUT", __func__); + dev_dbg(dev, "%s - TIMEOUT\n", __func__); return; } } else { @@ -1068,8 +1069,6 @@ static void edge_close(struct usb_serial_port *port) struct edgeport_port *edge_port; int status; - dbg("%s - port %d", __func__, port->number); - edge_serial = usb_get_serial_data(port->serial); edge_port = usb_get_serial_port_data(port); if (edge_serial == NULL || edge_port == NULL) @@ -1086,7 +1085,7 @@ static void edge_close(struct usb_serial_port *port) /* flush and chase */ edge_port->chaseResponsePending = true; - dbg("%s - Sending IOSP_CMD_CHASE_PORT", __func__); + dev_dbg(&port->dev, "%s - Sending IOSP_CMD_CHASE_PORT\n", __func__); status = send_iosp_ext_cmd(edge_port, IOSP_CMD_CHASE_PORT, 0); if (status == 0) /* block until chase finished */ @@ -1099,7 +1098,7 @@ static void edge_close(struct usb_serial_port *port) ((edge_serial->is_epic) && (edge_serial->epic_descriptor.Supports.IOSPClose))) { /* close the port */ - dbg("%s - Sending IOSP_CMD_CLOSE_PORT", __func__); + dev_dbg(&port->dev, "%s - Sending IOSP_CMD_CLOSE_PORT\n", __func__); send_iosp_ext_cmd(edge_port, IOSP_CMD_CLOSE_PORT, 0); } @@ -1119,8 +1118,6 @@ static void edge_close(struct usb_serial_port *port) } kfree(edge_port->txfifo.fifo); edge_port->txfifo.fifo = NULL; - - dbg("%s exited", __func__); } /***************************************************************************** @@ -1141,8 +1138,6 @@ static int edge_write(struct tty_struct *tty, struct usb_serial_port *port, int secondhalf; unsigned long flags; - dbg("%s - port %d", __func__, port->number); - if (edge_port == NULL) return -ENODEV; @@ -1155,14 +1150,14 @@ static int edge_write(struct tty_struct *tty, struct usb_serial_port *port, copySize = min((unsigned int)count, (edge_port->txCredits - fifo->count)); - dbg("%s(%d) of %d byte(s) Fifo room %d -- will copy %d bytes", - __func__, port->number, count, + dev_dbg(&port->dev, "%s(%d) of %d byte(s) Fifo room %d -- will copy %d bytes\n", + __func__, port->number, count, edge_port->txCredits - fifo->count, copySize); /* catch writes of 0 bytes which the tty driver likes to give us, and when txCredits is empty */ if (copySize == 0) { - dbg("%s - copySize = Zero", __func__); + dev_dbg(&port->dev, "%s - copySize = Zero\n", __func__); goto finish_write; } @@ -1175,13 +1170,12 @@ static int edge_write(struct tty_struct *tty, struct usb_serial_port *port, */ bytesleft = fifo->size - fifo->head; firsthalf = min(bytesleft, copySize); - dbg("%s - copy %d bytes of %d into fifo ", __func__, - firsthalf, bytesleft); + dev_dbg(&port->dev, "%s - copy %d bytes of %d into fifo \n", __func__, + firsthalf, bytesleft); /* now copy our data */ memcpy(&fifo->fifo[fifo->head], data, firsthalf); - usb_serial_debug_data(debug, &port->dev, __func__, - firsthalf, &fifo->fifo[fifo->head]); + usb_serial_debug_data(&port->dev, __func__, firsthalf, &fifo->fifo[fifo->head]); /* update the index and size */ fifo->head += firsthalf; @@ -1194,10 +1188,9 @@ static int edge_write(struct tty_struct *tty, struct usb_serial_port *port, secondhalf = copySize-firsthalf; if (secondhalf) { - dbg("%s - copy rest of data %d", __func__, secondhalf); + dev_dbg(&port->dev, "%s - copy rest of data %d\n", __func__, secondhalf); memcpy(&fifo->fifo[fifo->head], &data[firsthalf], secondhalf); - usb_serial_debug_data(debug, &port->dev, __func__, - secondhalf, &fifo->fifo[fifo->head]); + usb_serial_debug_data(&port->dev, __func__, secondhalf, &fifo->fifo[fifo->head]); /* update the index and size */ fifo->count += secondhalf; fifo->head += secondhalf; @@ -1212,8 +1205,8 @@ finish_write: send_more_port_data((struct edgeport_serial *) usb_get_serial_data(port->serial), edge_port); - dbg("%s wrote %d byte(s) TxCredits %d, Fifo %d", __func__, - copySize, edge_port->txCredits, fifo->count); + dev_dbg(&port->dev, "%s wrote %d byte(s) TxCredits %d, Fifo %d\n", + __func__, copySize, edge_port->txCredits, fifo->count); return copySize; } @@ -1236,6 +1229,7 @@ static void send_more_port_data(struct edgeport_serial *edge_serial, struct edgeport_port *edge_port) { struct TxFifo *fifo = &edge_port->txfifo; + struct device *dev = &edge_port->port->dev; struct urb *urb; unsigned char *buffer; int status; @@ -1245,16 +1239,14 @@ static void send_more_port_data(struct edgeport_serial *edge_serial, int secondhalf; unsigned long flags; - dbg("%s(%d)", __func__, edge_port->port->number); - spin_lock_irqsave(&edge_port->ep_lock, flags); if (edge_port->write_in_progress || !edge_port->open || (fifo->count == 0)) { - dbg("%s(%d) EXIT - fifo %d, PendingWrite = %d", - __func__, edge_port->port->number, - fifo->count, edge_port->write_in_progress); + dev_dbg(dev, "%s(%d) EXIT - fifo %d, PendingWrite = %d\n", + __func__, edge_port->port->number, + fifo->count, edge_port->write_in_progress); goto exit_send; } @@ -1266,7 +1258,7 @@ static void send_more_port_data(struct edgeport_serial *edge_serial, * it's better to wait for more credits so we can do a larger write. */ if (edge_port->txCredits < EDGE_FW_GET_TX_CREDITS_SEND_THRESHOLD(edge_port->maxTxCredits, EDGE_FW_BULK_MAX_PACKET_SIZE)) { - dbg("%s(%d) Not enough credit - fifo %d TxCredit %d", + dev_dbg(dev, "%s(%d) Not enough credit - fifo %d TxCredit %d\n", __func__, edge_port->port->number, fifo->count, edge_port->txCredits); goto exit_send; @@ -1315,8 +1307,7 @@ static void send_more_port_data(struct edgeport_serial *edge_serial, } if (count) - usb_serial_debug_data(debug, &edge_port->port->dev, - __func__, count, &buffer[2]); + usb_serial_debug_data(&edge_port->port->dev, __func__, count, &buffer[2]); /* fill up the urb with all of our data and submit it */ usb_fill_bulk_urb(urb, edge_serial->serial->dev, @@ -1341,8 +1332,8 @@ static void send_more_port_data(struct edgeport_serial *edge_serial, edge_port->txCredits += count; edge_port->icount.tx -= count; } - dbg("%s wrote %d byte(s) TxCredit %d, Fifo %d", - __func__, count, edge_port->txCredits, fifo->count); + dev_dbg(dev, "%s wrote %d byte(s) TxCredit %d, Fifo %d\n", + __func__, count, edge_port->txCredits, fifo->count); exit_send: spin_unlock_irqrestore(&edge_port->ep_lock, flags); @@ -1363,17 +1354,13 @@ static int edge_write_room(struct tty_struct *tty) int room; unsigned long flags; - dbg("%s", __func__); - if (edge_port == NULL) return 0; if (edge_port->closePending) return 0; - dbg("%s - port %d", __func__, port->number); - if (!edge_port->open) { - dbg("%s - port not opened", __func__); + dev_dbg(&port->dev, "%s - port not opened\n", __func__); return 0; } @@ -1382,7 +1369,7 @@ static int edge_write_room(struct tty_struct *tty) room = edge_port->txCredits - edge_port->txfifo.count; spin_unlock_irqrestore(&edge_port->ep_lock, flags); - dbg("%s - returns %d", __func__, room); + dev_dbg(&port->dev, "%s - returns %d\n", __func__, room); return room; } @@ -1403,15 +1390,13 @@ static int edge_chars_in_buffer(struct tty_struct *tty) int num_chars; unsigned long flags; - dbg("%s", __func__); - if (edge_port == NULL) return 0; if (edge_port->closePending) return 0; if (!edge_port->open) { - dbg("%s - port not opened", __func__); + dev_dbg(&port->dev, "%s - port not opened\n", __func__); return 0; } @@ -1420,8 +1405,8 @@ static int edge_chars_in_buffer(struct tty_struct *tty) edge_port->txfifo.count; spin_unlock_irqrestore(&edge_port->ep_lock, flags); if (num_chars) { - dbg("%s(port %d) - returns %d", __func__, - port->number, num_chars); + dev_dbg(&port->dev, "%s(port %d) - returns %d\n", __func__, + port->number, num_chars); } return num_chars; @@ -1439,13 +1424,11 @@ static void edge_throttle(struct tty_struct *tty) struct edgeport_port *edge_port = usb_get_serial_port_data(port); int status; - dbg("%s - port %d", __func__, port->number); - if (edge_port == NULL) return; if (!edge_port->open) { - dbg("%s - port not opened", __func__); + dev_dbg(&port->dev, "%s - port not opened\n", __func__); return; } @@ -1479,13 +1462,11 @@ static void edge_unthrottle(struct tty_struct *tty) struct edgeport_port *edge_port = usb_get_serial_port_data(port); int status; - dbg("%s - port %d", __func__, port->number); - if (edge_port == NULL) return; if (!edge_port->open) { - dbg("%s - port not opened", __func__); + dev_dbg(&port->dev, "%s - port not opened\n", __func__); return; } @@ -1517,18 +1498,14 @@ static void edge_set_termios(struct tty_struct *tty, unsigned int cflag; cflag = tty->termios.c_cflag; - dbg("%s - clfag %08x iflag %08x", __func__, - tty->termios.c_cflag, tty->termios.c_iflag); - dbg("%s - old clfag %08x old iflag %08x", __func__, - old_termios->c_cflag, old_termios->c_iflag); - - dbg("%s - port %d", __func__, port->number); + dev_dbg(&port->dev, "%s - clfag %08x iflag %08x\n", __func__, tty->termios.c_cflag, tty->termios.c_iflag); + dev_dbg(&port->dev, "%s - old clfag %08x old iflag %08x\n", __func__, old_termios->c_cflag, old_termios->c_iflag); if (edge_port == NULL) return; if (!edge_port->open) { - dbg("%s - port not opened", __func__); + dev_dbg(&port->dev, "%s - port not opened\n", __func__); return; } @@ -1556,7 +1533,7 @@ static int get_lsr_info(struct edgeport_port *edge_port, spin_lock_irqsave(&edge_port->ep_lock, flags); if (edge_port->maxTxCredits == edge_port->txCredits && edge_port->txfifo.count == 0) { - dbg("%s -- Empty", __func__); + dev_dbg(&edge_port->port->dev, "%s -- Empty\n", __func__); result = TIOCSER_TEMT; } spin_unlock_irqrestore(&edge_port->ep_lock, flags); @@ -1573,8 +1550,6 @@ static int edge_tiocmset(struct tty_struct *tty, struct edgeport_port *edge_port = usb_get_serial_port_data(port); unsigned int mcr; - dbg("%s - port %d", __func__, port->number); - mcr = edge_port->shadowMCR; if (set & TIOCM_RTS) mcr |= MCR_RTS; @@ -1605,8 +1580,6 @@ static int edge_tiocmget(struct tty_struct *tty) unsigned int msr; unsigned int mcr; - dbg("%s - port %d", __func__, port->number); - msr = edge_port->shadowMSR; mcr = edge_port->shadowMCR; result = ((mcr & MCR_DTR) ? TIOCM_DTR: 0) /* 0x002 */ @@ -1616,9 +1589,6 @@ static int edge_tiocmget(struct tty_struct *tty) | ((msr & EDGEPORT_MSR_RI) ? TIOCM_RI: 0) /* 0x080 */ | ((msr & EDGEPORT_MSR_DSR) ? TIOCM_DSR: 0); /* 0x100 */ - - dbg("%s -- %x", __func__, result); - return result; } @@ -1642,8 +1612,8 @@ static int edge_get_icount(struct tty_struct *tty, icount->brk = cnow.brk; icount->buf_overrun = cnow.buf_overrun; - dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d", - __func__, port->number, icount->rx, icount->tx); + dev_dbg(&port->dev, "%s (%d) TIOCGICOUNT RX=%d, TX=%d\n", __func__, + port->number, icount->rx, icount->tx); return 0; } @@ -1686,19 +1656,19 @@ static int edge_ioctl(struct tty_struct *tty, struct async_icount cnow; struct async_icount cprev; - dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd); + dev_dbg(&port->dev, "%s - port %d, cmd = 0x%x\n", __func__, port->number, cmd); switch (cmd) { case TIOCSERGETLSR: - dbg("%s (%d) TIOCSERGETLSR", __func__, port->number); + dev_dbg(&port->dev, "%s (%d) TIOCSERGETLSR\n", __func__, port->number); return get_lsr_info(edge_port, (unsigned int __user *) arg); case TIOCGSERIAL: - dbg("%s (%d) TIOCGSERIAL", __func__, port->number); + dev_dbg(&port->dev, "%s (%d) TIOCGSERIAL\n", __func__, port->number); return get_serial_info(edge_port, (struct serial_struct __user *) arg); case TIOCMIWAIT: - dbg("%s (%d) TIOCMIWAIT", __func__, port->number); + dev_dbg(&port->dev, "%s (%d) TIOCMIWAIT\n", __func__, port->number); cprev = edge_port->icount; while (1) { prepare_to_wait(&edge_port->delta_msr_wait, @@ -1745,7 +1715,7 @@ static void edge_break(struct tty_struct *tty, int break_state) /* flush and chase */ edge_port->chaseResponsePending = true; - dbg("%s - Sending IOSP_CMD_CHASE_PORT", __func__); + dev_dbg(&port->dev, "%s - Sending IOSP_CMD_CHASE_PORT\n", __func__); status = send_iosp_ext_cmd(edge_port, IOSP_CMD_CHASE_PORT, 0); if (status == 0) { /* block until chase finished */ @@ -1759,16 +1729,16 @@ static void edge_break(struct tty_struct *tty, int break_state) ((edge_serial->is_epic) && (edge_serial->epic_descriptor.Supports.IOSPSetClrBreak))) { if (break_state == -1) { - dbg("%s - Sending IOSP_CMD_SET_BREAK", __func__); + dev_dbg(&port->dev, "%s - Sending IOSP_CMD_SET_BREAK\n", __func__); status = send_iosp_ext_cmd(edge_port, IOSP_CMD_SET_BREAK, 0); } else { - dbg("%s - Sending IOSP_CMD_CLEAR_BREAK", __func__); + dev_dbg(&port->dev, "%s - Sending IOSP_CMD_CLEAR_BREAK\n", __func__); status = send_iosp_ext_cmd(edge_port, IOSP_CMD_CLEAR_BREAK, 0); } if (status) - dbg("%s - error sending break set/clear command.", + dev_dbg(&port->dev, "%s - error sending break set/clear command.\n", __func__); } } @@ -1781,20 +1751,19 @@ static void edge_break(struct tty_struct *tty, int break_state) static void process_rcvd_data(struct edgeport_serial *edge_serial, unsigned char *buffer, __u16 bufferLength) { + struct device *dev = &edge_serial->serial->dev->dev; struct usb_serial_port *port; struct edgeport_port *edge_port; struct tty_struct *tty; __u16 lastBufferLength; __u16 rxLen; - dbg("%s", __func__); - lastBufferLength = bufferLength + 1; while (bufferLength > 0) { /* failsafe incase we get a message that we don't understand */ if (lastBufferLength == bufferLength) { - dbg("%s - stuck in loop, exiting it.", __func__); + dev_dbg(dev, "%s - stuck in loop, exiting it.\n", __func__); break; } lastBufferLength = bufferLength; @@ -1815,8 +1784,8 @@ static void process_rcvd_data(struct edgeport_serial *edge_serial, ++buffer; --bufferLength; - dbg("%s - Hdr1=%02X Hdr2=%02X", __func__, - edge_serial->rxHeader1, edge_serial->rxHeader2); + dev_dbg(dev, "%s - Hdr1=%02X Hdr2=%02X\n", __func__, + edge_serial->rxHeader1, edge_serial->rxHeader2); /* Process depending on whether this header is * data or status */ @@ -1855,10 +1824,10 @@ static void process_rcvd_data(struct edgeport_serial *edge_serial, IOSP_GET_HDR_DATA_LEN( edge_serial->rxHeader1, edge_serial->rxHeader2); - dbg("%s - Data for Port %u Len %u", - __func__, - edge_serial->rxPort, - edge_serial->rxBytesRemaining); + dev_dbg(dev, "%s - Data for Port %u Len %u\n", + __func__, + edge_serial->rxPort, + edge_serial->rxBytesRemaining); /* ASSERT(DevExt->RxPort < DevExt->NumPorts); * ASSERT(DevExt->RxBytesRemaining < @@ -1896,7 +1865,7 @@ static void process_rcvd_data(struct edgeport_serial *edge_serial, tty = tty_port_tty_get( &edge_port->port->port); if (tty) { - dbg("%s - Sending %d bytes to TTY for port %d", + dev_dbg(dev, "%s - Sending %d bytes to TTY for port %d\n", __func__, rxLen, edge_serial->rxPort); edge_tty_recv(&edge_serial->serial->dev->dev, tty, buffer, rxLen); tty_kref_put(tty); @@ -1935,6 +1904,7 @@ static void process_rcvd_status(struct edgeport_serial *edge_serial, struct usb_serial_port *port; struct edgeport_port *edge_port; struct tty_struct *tty; + struct device *dev; __u8 code = edge_serial->rxStatusCode; /* switch the port pointer to the one being currently talked about */ @@ -1946,16 +1916,15 @@ static void process_rcvd_status(struct edgeport_serial *edge_serial, __func__, edge_serial->rxPort); return; } - - dbg("%s - port %d", __func__, edge_serial->rxPort); + dev = &port->dev; if (code == IOSP_EXT_STATUS) { switch (byte2) { case IOSP_EXT_STATUS_CHASE_RSP: /* we want to do EXT status regardless of port * open/closed */ - dbg("%s - Port %u EXT CHASE_RSP Data = %02x", - __func__, edge_serial->rxPort, byte3); + dev_dbg(dev, "%s - Port %u EXT CHASE_RSP Data = %02x\n", + __func__, edge_serial->rxPort, byte3); /* Currently, the only EXT_STATUS is Chase, so process * here instead of one more call to one more subroutine * If/when more EXT_STATUS, there'll be more work to do @@ -1970,7 +1939,8 @@ static void process_rcvd_status(struct edgeport_serial *edge_serial, return; case IOSP_EXT_STATUS_RX_CHECK_RSP: - dbg("%s ========== Port %u CHECK_RSP Sequence = %02x =============", __func__, edge_serial->rxPort, byte3); + dev_dbg(dev, "%s ========== Port %u CHECK_RSP Sequence = %02x =============\n", + __func__, edge_serial->rxPort, byte3); /* Port->RxCheckRsp = true; */ return; } @@ -1979,7 +1949,8 @@ static void process_rcvd_status(struct edgeport_serial *edge_serial, if (code == IOSP_STATUS_OPEN_RSP) { edge_port->txCredits = GET_TX_BUFFER_SIZE(byte3); edge_port->maxTxCredits = edge_port->txCredits; - dbg("%s - Port %u Open Response Initial MSR = %02x TxBufferSize = %d", __func__, edge_serial->rxPort, byte2, edge_port->txCredits); + dev_dbg(dev, "%s - Port %u Open Response Initial MSR = %02x TxBufferSize = %d\n", + __func__, edge_serial->rxPort, byte2, edge_port->txCredits); handle_new_msr(edge_port, byte2); /* send the current line settings to the port so we are @@ -2008,27 +1979,27 @@ static void process_rcvd_status(struct edgeport_serial *edge_serial, switch (code) { /* Not currently sent by Edgeport */ case IOSP_STATUS_LSR: - dbg("%s - Port %u LSR Status = %02x", - __func__, edge_serial->rxPort, byte2); + dev_dbg(dev, "%s - Port %u LSR Status = %02x\n", + __func__, edge_serial->rxPort, byte2); handle_new_lsr(edge_port, false, byte2, 0); break; case IOSP_STATUS_LSR_DATA: - dbg("%s - Port %u LSR Status = %02x, Data = %02x", - __func__, edge_serial->rxPort, byte2, byte3); + dev_dbg(dev, "%s - Port %u LSR Status = %02x, Data = %02x\n", + __func__, edge_serial->rxPort, byte2, byte3); /* byte2 is LSR Register */ /* byte3 is broken data byte */ handle_new_lsr(edge_port, true, byte2, byte3); break; /* * case IOSP_EXT_4_STATUS: - * dbg("%s - Port %u LSR Status = %02x Data = %02x", + * dev_dbg(dev, "%s - Port %u LSR Status = %02x Data = %02x\n", * __func__, edge_serial->rxPort, byte2, byte3); * break; */ case IOSP_STATUS_MSR: - dbg("%s - Port %u MSR Status = %02x", - __func__, edge_serial->rxPort, byte2); + dev_dbg(dev, "%s - Port %u MSR Status = %02x\n", + __func__, edge_serial->rxPort, byte2); /* * Process this new modem status and generate appropriate * events, etc, based on the new status. This routine @@ -2038,7 +2009,7 @@ static void process_rcvd_status(struct edgeport_serial *edge_serial, break; default: - dbg("%s - Unrecognized IOSP status code %u", __func__, code); + dev_dbg(dev, "%s - Unrecognized IOSP status code %u\n", __func__, code); break; } } @@ -2073,8 +2044,6 @@ static void handle_new_msr(struct edgeport_port *edge_port, __u8 newMsr) { struct async_icount *icount; - dbg("%s %02x", __func__, newMsr); - if (newMsr & (EDGEPORT_MSR_DELTA_CTS | EDGEPORT_MSR_DELTA_DSR | EDGEPORT_MSR_DELTA_RI | EDGEPORT_MSR_DELTA_CD)) { icount = &edge_port->icount; @@ -2107,8 +2076,6 @@ static void handle_new_lsr(struct edgeport_port *edge_port, __u8 lsrData, (LSR_OVER_ERR | LSR_PAR_ERR | LSR_FRM_ERR | LSR_BREAK)); struct async_icount *icount; - dbg("%s - %02x", __func__, newLsr); - edge_port->shadowLSR = lsr; if (newLsr & LSR_BREAK) { @@ -2156,7 +2123,7 @@ static int sram_write(struct usb_serial *serial, __u16 extAddr, __u16 addr, __u16 current_length; unsigned char *transfer_buffer; - dbg("%s - %x, %x, %d", __func__, extAddr, addr, length); + dev_dbg(&serial->dev->dev, "%s - %x, %x, %d\n", __func__, extAddr, addr, length); transfer_buffer = kmalloc(64, GFP_KERNEL); if (!transfer_buffer) { @@ -2173,8 +2140,7 @@ static int sram_write(struct usb_serial *serial, __u16 extAddr, __u16 addr, else current_length = length; -/* dbg("%s - writing %x, %x, %d", __func__, - extAddr, addr, current_length); */ +/* dev_dbg(&serial->dev->dev, "%s - writing %x, %x, %d\n", __func__, extAddr, addr, current_length); */ memcpy(transfer_buffer, data, current_length); result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), @@ -2207,8 +2173,6 @@ static int rom_write(struct usb_serial *serial, __u16 extAddr, __u16 addr, __u16 current_length; unsigned char *transfer_buffer; -/* dbg("%s - %x, %x, %d", __func__, extAddr, addr, length); */ - transfer_buffer = kmalloc(64, GFP_KERNEL); if (!transfer_buffer) { dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n", @@ -2223,8 +2187,6 @@ static int rom_write(struct usb_serial *serial, __u16 extAddr, __u16 addr, current_length = 64; else current_length = length; -/* dbg("%s - writing %x, %x, %d", __func__, - extAddr, addr, current_length); */ memcpy(transfer_buffer, data, current_length); result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), @@ -2257,8 +2219,6 @@ static int rom_read(struct usb_serial *serial, __u16 extAddr, __u16 current_length; unsigned char *transfer_buffer; - dbg("%s - %x, %x, %d", __func__, extAddr, addr, length); - transfer_buffer = kmalloc(64, GFP_KERNEL); if (!transfer_buffer) { dev_err(&serial->dev->dev, @@ -2273,8 +2233,6 @@ static int rom_read(struct usb_serial *serial, __u16 extAddr, current_length = 64; else current_length = length; -/* dbg("%s - %x, %x, %d", __func__, - extAddr, addr, current_length); */ result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), USB_REQUEST_ION_READ_ROM, @@ -2305,8 +2263,6 @@ static int send_iosp_ext_cmd(struct edgeport_port *edge_port, int length = 0; int status = 0; - dbg("%s - %d, %d", __func__, command, param); - buffer = kmalloc(10, GFP_ATOMIC); if (!buffer) { dev_err(&edge_port->port->dev, @@ -2339,11 +2295,11 @@ static int write_cmd_usb(struct edgeport_port *edge_port, { struct edgeport_serial *edge_serial = usb_get_serial_data(edge_port->port->serial); + struct device *dev = &edge_port->port->dev; int status = 0; struct urb *urb; - usb_serial_debug_data(debug, &edge_port->port->dev, - __func__, length, buffer); + usb_serial_debug_data(dev, __func__, length, buffer); /* Allocate our next urb */ urb = usb_alloc_urb(0, GFP_ATOMIC); @@ -2351,8 +2307,8 @@ static int write_cmd_usb(struct edgeport_port *edge_port, return -ENOMEM; atomic_inc(&CmdUrbs); - dbg("%s - ALLOCATE URB %p (outstanding %d)", - __func__, urb, atomic_read(&CmdUrbs)); + dev_dbg(dev, "%s - ALLOCATE URB %p (outstanding %d)\n", + __func__, urb, atomic_read(&CmdUrbs)); usb_fill_bulk_urb(urb, edge_serial->serial->dev, usb_sndbulkpipe(edge_serial->serial->dev, @@ -2364,9 +2320,8 @@ static int write_cmd_usb(struct edgeport_port *edge_port, if (status) { /* something went wrong */ - dev_err(&edge_port->port->dev, - "%s - usb_submit_urb(write command) failed, status = %d\n", - __func__, status); + dev_err(dev, "%s - usb_submit_urb(write command) failed, status = %d\n", + __func__, status); usb_kill_urb(urb); usb_free_urb(urb); atomic_dec(&CmdUrbs); @@ -2378,7 +2333,7 @@ static int write_cmd_usb(struct edgeport_port *edge_port, if (edge_port->commandPending) { /* command timed out */ - dbg("%s - command timed out", __func__); + dev_dbg(dev, "%s - command timed out\n", __func__); status = -EINVAL; } #endif @@ -2396,6 +2351,7 @@ static int send_cmd_write_baud_rate(struct edgeport_port *edge_port, { struct edgeport_serial *edge_serial = usb_get_serial_data(edge_port->port->serial); + struct device *dev = &edge_port->port->dev; unsigned char *cmdBuffer; unsigned char *currCmd; int cmdLen = 0; @@ -2406,26 +2362,24 @@ static int send_cmd_write_baud_rate(struct edgeport_port *edge_port, if (edge_serial->is_epic && !edge_serial->epic_descriptor.Supports.IOSPSetBaudRate) { - dbg("SendCmdWriteBaudRate - NOT Setting baud rate for port = %d, baud = %d", - edge_port->port->number, baudRate); + dev_dbg(dev, "SendCmdWriteBaudRate - NOT Setting baud rate for port = %d, baud = %d\n", + edge_port->port->number, baudRate); return 0; } - dbg("%s - port = %d, baud = %d", __func__, - edge_port->port->number, baudRate); + dev_dbg(dev, "%s - port = %d, baud = %d\n", __func__, + edge_port->port->number, baudRate); - status = calc_baud_rate_divisor(baudRate, &divisor); + status = calc_baud_rate_divisor(dev, baudRate, &divisor); if (status) { - dev_err(&edge_port->port->dev, "%s - bad baud rate\n", - __func__); + dev_err(dev, "%s - bad baud rate\n", __func__); return status; } /* Alloc memory for the string of commands. */ cmdBuffer = kmalloc(0x100, GFP_ATOMIC); if (!cmdBuffer) { - dev_err(&edge_port->port->dev, - "%s - kmalloc(%d) failed.\n", __func__, 0x100); + dev_err(dev, "%s - kmalloc(%d) failed.\n", __func__, 0x100); return -ENOMEM; } currCmd = cmdBuffer; @@ -2456,14 +2410,11 @@ static int send_cmd_write_baud_rate(struct edgeport_port *edge_port, * this function calculates the proper baud rate divisor for the specified * baud rate. *****************************************************************************/ -static int calc_baud_rate_divisor(int baudrate, int *divisor) +static int calc_baud_rate_divisor(struct device *dev, int baudrate, int *divisor) { int i; __u16 custom; - - dbg("%s - %d", __func__, baudrate); - for (i = 0; i < ARRAY_SIZE(divisor_table); i++) { if (divisor_table[i].BaudRate == baudrate) { *divisor = divisor_table[i].Divisor; @@ -2480,7 +2431,7 @@ static int calc_baud_rate_divisor(int baudrate, int *divisor) *divisor = custom; - dbg("%s - Baud %d = %d", __func__, baudrate, custom); + dev_dbg(dev, "%s - Baud %d = %d\n", __func__, baudrate, custom); return 0; } @@ -2497,25 +2448,26 @@ static int send_cmd_write_uart_register(struct edgeport_port *edge_port, { struct edgeport_serial *edge_serial = usb_get_serial_data(edge_port->port->serial); + struct device *dev = &edge_port->port->dev; unsigned char *cmdBuffer; unsigned char *currCmd; unsigned long cmdLen = 0; int status; - dbg("%s - write to %s register 0x%02x", - (regNum == MCR) ? "MCR" : "LCR", __func__, regValue); + dev_dbg(dev, "%s - write to %s register 0x%02x\n", + (regNum == MCR) ? "MCR" : "LCR", __func__, regValue); if (edge_serial->is_epic && !edge_serial->epic_descriptor.Supports.IOSPWriteMCR && regNum == MCR) { - dbg("SendCmdWriteUartReg - Not writing to MCR Register"); + dev_dbg(dev, "SendCmdWriteUartReg - Not writing to MCR Register\n"); return 0; } if (edge_serial->is_epic && !edge_serial->epic_descriptor.Supports.IOSPWriteLCR && regNum == LCR) { - dbg("SendCmdWriteUartReg - Not writing to LCR Register"); + dev_dbg(dev, "SendCmdWriteUartReg - Not writing to LCR Register\n"); return 0; } @@ -2550,6 +2502,7 @@ static int send_cmd_write_uart_register(struct edgeport_port *edge_port, static void change_port_settings(struct tty_struct *tty, struct edgeport_port *edge_port, struct ktermios *old_termios) { + struct device *dev = &edge_port->port->dev; struct edgeport_serial *edge_serial = usb_get_serial_data(edge_port->port->serial); int baud; @@ -2562,11 +2515,11 @@ static void change_port_settings(struct tty_struct *tty, __u8 txFlow; int status; - dbg("%s - port %d", __func__, edge_port->port->number); + dev_dbg(dev, "%s - port %d\n", __func__, edge_port->port->number); if (!edge_port->open && !edge_port->openPending) { - dbg("%s - port not opened", __func__); + dev_dbg(dev, "%s - port not opened\n", __func__); return; } @@ -2575,20 +2528,20 @@ static void change_port_settings(struct tty_struct *tty, switch (cflag & CSIZE) { case CS5: lData = LCR_BITS_5; mask = 0x1f; - dbg("%s - data bits = 5", __func__); + dev_dbg(dev, "%s - data bits = 5\n", __func__); break; case CS6: lData = LCR_BITS_6; mask = 0x3f; - dbg("%s - data bits = 6", __func__); + dev_dbg(dev, "%s - data bits = 6\n", __func__); break; case CS7: lData = LCR_BITS_7; mask = 0x7f; - dbg("%s - data bits = 7", __func__); + dev_dbg(dev, "%s - data bits = 7\n", __func__); break; default: case CS8: lData = LCR_BITS_8; - dbg("%s - data bits = 8", __func__); + dev_dbg(dev, "%s - data bits = 8\n", __func__); break; } @@ -2597,28 +2550,28 @@ static void change_port_settings(struct tty_struct *tty, if (cflag & CMSPAR) { if (cflag & PARODD) { lParity = LCR_PAR_MARK; - dbg("%s - parity = mark", __func__); + dev_dbg(dev, "%s - parity = mark\n", __func__); } else { lParity = LCR_PAR_SPACE; - dbg("%s - parity = space", __func__); + dev_dbg(dev, "%s - parity = space\n", __func__); } } else if (cflag & PARODD) { lParity = LCR_PAR_ODD; - dbg("%s - parity = odd", __func__); + dev_dbg(dev, "%s - parity = odd\n", __func__); } else { lParity = LCR_PAR_EVEN; - dbg("%s - parity = even", __func__); + dev_dbg(dev, "%s - parity = even\n", __func__); } } else { - dbg("%s - parity = none", __func__); + dev_dbg(dev, "%s - parity = none\n", __func__); } if (cflag & CSTOPB) { lStop = LCR_STOP_2; - dbg("%s - stop bits = 2", __func__); + dev_dbg(dev, "%s - stop bits = 2\n", __func__); } else { lStop = LCR_STOP_1; - dbg("%s - stop bits = 1", __func__); + dev_dbg(dev, "%s - stop bits = 1\n", __func__); } /* figure out the flow control settings */ @@ -2626,9 +2579,9 @@ static void change_port_settings(struct tty_struct *tty, if (cflag & CRTSCTS) { rxFlow |= IOSP_RX_FLOW_RTS; txFlow |= IOSP_TX_FLOW_CTS; - dbg("%s - RTS/CTS is enabled", __func__); + dev_dbg(dev, "%s - RTS/CTS is enabled\n", __func__); } else { - dbg("%s - RTS/CTS is disabled", __func__); + dev_dbg(dev, "%s - RTS/CTS is disabled\n", __func__); } /* if we are implementing XON/XOFF, set the start and stop character @@ -2649,19 +2602,19 @@ static void change_port_settings(struct tty_struct *tty, /* if we are implementing INBOUND XON/XOFF */ if (I_IXOFF(tty)) { rxFlow |= IOSP_RX_FLOW_XON_XOFF; - dbg("%s - INBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x", - __func__, start_char, stop_char); + dev_dbg(dev, "%s - INBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x\n", + __func__, start_char, stop_char); } else { - dbg("%s - INBOUND XON/XOFF is disabled", __func__); + dev_dbg(dev, "%s - INBOUND XON/XOFF is disabled\n", __func__); } /* if we are implementing OUTBOUND XON/XOFF */ if (I_IXON(tty)) { txFlow |= IOSP_TX_FLOW_XON_XOFF; - dbg("%s - OUTBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x", - __func__, start_char, stop_char); + dev_dbg(dev, "%s - OUTBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x\n", + __func__, start_char, stop_char); } else { - dbg("%s - OUTBOUND XON/XOFF is disabled", __func__); + dev_dbg(dev, "%s - OUTBOUND XON/XOFF is disabled\n", __func__); } } @@ -2704,7 +2657,7 @@ static void change_port_settings(struct tty_struct *tty, baud = 9600; } - dbg("%s - baud rate = %d", __func__, baud); + dev_dbg(dev, "%s - baud rate = %d\n", __func__, baud); status = send_cmd_write_baud_rate(edge_port, baud); if (status == -1) { /* Speed change was not possible - put back the old speed */ @@ -2746,9 +2699,10 @@ static void unicode_to_ascii(char *string, int buflen, ****************************************************************************/ static void get_manufacturing_desc(struct edgeport_serial *edge_serial) { + struct device *dev = &edge_serial->serial->dev->dev; int response; - dbg("getting manufacturer descriptor"); + dev_dbg(dev, "getting manufacturer descriptor\n"); response = rom_read(edge_serial->serial, (EDGE_MANUF_DESC_ADDR & 0xffff0000) >> 16, @@ -2757,42 +2711,41 @@ static void get_manufacturing_desc(struct edgeport_serial *edge_serial) (__u8 *)(&edge_serial->manuf_descriptor)); if (response < 1) - dev_err(&edge_serial->serial->dev->dev, - "error in getting manufacturer descriptor\n"); + dev_err(dev, "error in getting manufacturer descriptor\n"); else { char string[30]; - dbg("**Manufacturer Descriptor"); - dbg(" RomSize: %dK", + dev_dbg(dev, "**Manufacturer Descriptor\n"); + dev_dbg(dev, " RomSize: %dK\n", edge_serial->manuf_descriptor.RomSize); - dbg(" RamSize: %dK", + dev_dbg(dev, " RamSize: %dK\n", edge_serial->manuf_descriptor.RamSize); - dbg(" CpuRev: %d", + dev_dbg(dev, " CpuRev: %d\n", edge_serial->manuf_descriptor.CpuRev); - dbg(" BoardRev: %d", + dev_dbg(dev, " BoardRev: %d\n", edge_serial->manuf_descriptor.BoardRev); - dbg(" NumPorts: %d", + dev_dbg(dev, " NumPorts: %d\n", edge_serial->manuf_descriptor.NumPorts); - dbg(" DescDate: %d/%d/%d", + dev_dbg(dev, " DescDate: %d/%d/%d\n", edge_serial->manuf_descriptor.DescDate[0], edge_serial->manuf_descriptor.DescDate[1], edge_serial->manuf_descriptor.DescDate[2]+1900); unicode_to_ascii(string, sizeof(string), edge_serial->manuf_descriptor.SerialNumber, edge_serial->manuf_descriptor.SerNumLength/2); - dbg(" SerialNumber: %s", string); + dev_dbg(dev, " SerialNumber: %s\n", string); unicode_to_ascii(string, sizeof(string), edge_serial->manuf_descriptor.AssemblyNumber, edge_serial->manuf_descriptor.AssemblyNumLength/2); - dbg(" AssemblyNumber: %s", string); + dev_dbg(dev, " AssemblyNumber: %s\n", string); unicode_to_ascii(string, sizeof(string), edge_serial->manuf_descriptor.OemAssyNumber, edge_serial->manuf_descriptor.OemAssyNumLength/2); - dbg(" OemAssyNumber: %s", string); - dbg(" UartType: %d", + dev_dbg(dev, " OemAssyNumber: %s\n", string); + dev_dbg(dev, " UartType: %d\n", edge_serial->manuf_descriptor.UartType); - dbg(" IonPid: %d", + dev_dbg(dev, " IonPid: %d\n", edge_serial->manuf_descriptor.IonPid); - dbg(" IonConfig: %d", + dev_dbg(dev, " IonConfig: %d\n", edge_serial->manuf_descriptor.IonConfig); } } @@ -2805,9 +2758,10 @@ static void get_manufacturing_desc(struct edgeport_serial *edge_serial) ****************************************************************************/ static void get_boot_desc(struct edgeport_serial *edge_serial) { + struct device *dev = &edge_serial->serial->dev->dev; int response; - dbg("getting boot descriptor"); + dev_dbg(dev, "getting boot descriptor\n"); response = rom_read(edge_serial->serial, (EDGE_BOOT_DESC_ADDR & 0xffff0000) >> 16, @@ -2816,23 +2770,22 @@ static void get_boot_desc(struct edgeport_serial *edge_serial) (__u8 *)(&edge_serial->boot_descriptor)); if (response < 1) - dev_err(&edge_serial->serial->dev->dev, - "error in getting boot descriptor\n"); + dev_err(dev, "error in getting boot descriptor\n"); else { - dbg("**Boot Descriptor:"); - dbg(" BootCodeLength: %d", - le16_to_cpu(edge_serial->boot_descriptor.BootCodeLength)); - dbg(" MajorVersion: %d", + dev_dbg(dev, "**Boot Descriptor:\n"); + dev_dbg(dev, " BootCodeLength: %d\n", + le16_to_cpu(edge_serial->boot_descriptor.BootCodeLength)); + dev_dbg(dev, " MajorVersion: %d\n", edge_serial->boot_descriptor.MajorVersion); - dbg(" MinorVersion: %d", + dev_dbg(dev, " MinorVersion: %d\n", edge_serial->boot_descriptor.MinorVersion); - dbg(" BuildNumber: %d", + dev_dbg(dev, " BuildNumber: %d\n", le16_to_cpu(edge_serial->boot_descriptor.BuildNumber)); - dbg(" Capabilities: 0x%x", + dev_dbg(dev, " Capabilities: 0x%x\n", le16_to_cpu(edge_serial->boot_descriptor.Capabilities)); - dbg(" UConfig0: %d", + dev_dbg(dev, " UConfig0: %d\n", edge_serial->boot_descriptor.UConfig0); - dbg(" UConfig1: %d", + dev_dbg(dev, " UConfig1: %d\n", edge_serial->boot_descriptor.UConfig1); } } @@ -2844,6 +2797,7 @@ static void get_boot_desc(struct edgeport_serial *edge_serial) ****************************************************************************/ static void load_application_firmware(struct edgeport_serial *edge_serial) { + struct device *dev = &edge_serial->serial->dev->dev; const struct ihex_binrec *rec; const struct firmware *fw; const char *fw_name; @@ -2864,7 +2818,7 @@ static void load_application_firmware(struct edgeport_serial *edge_serial) break; case EDGE_DOWNLOAD_FILE_NONE: - dbg("No download file specified, skipping download"); + dev_dbg(dev, "No download file specified, skipping download\n"); return; default: @@ -2874,7 +2828,7 @@ static void load_application_firmware(struct edgeport_serial *edge_serial) response = request_ihex_firmware(&fw, fw_name, &edge_serial->serial->dev->dev); if (response) { - printk(KERN_ERR "Failed to load image \"%s\" err %d\n", + dev_err(dev, "Failed to load image \"%s\" err %d\n", fw_name, response); return; } @@ -2882,7 +2836,7 @@ static void load_application_firmware(struct edgeport_serial *edge_serial) rec = (const struct ihex_binrec *)fw->data; build = (rec->data[2] << 8) | rec->data[3]; - dbg("%s %d.%d.%d", fw_info, rec->data[0], rec->data[1], build); + dev_dbg(dev, "%s %d.%d.%d\n", fw_info, rec->data[0], rec->data[1], build); edge_serial->product_info.FirmwareMajorVersion = rec->data[0]; edge_serial->product_info.FirmwareMinorVersion = rec->data[1]; @@ -2905,10 +2859,10 @@ static void load_application_firmware(struct edgeport_serial *edge_serial) } } - dbg("sending exec_dl_code"); - response = usb_control_msg (edge_serial->serial->dev, - usb_sndctrlpipe(edge_serial->serial->dev, 0), - USB_REQUEST_ION_EXEC_DL_CODE, + dev_dbg(dev, "sending exec_dl_code\n"); + response = usb_control_msg (edge_serial->serial->dev, + usb_sndctrlpipe(edge_serial->serial->dev, 0), + USB_REQUEST_ION_EXEC_DL_CODE, 0x40, 0x4000, 0x0001, NULL, 0, 3000); release_firmware(fw); @@ -2923,6 +2877,7 @@ static int edge_startup(struct usb_serial *serial) struct edgeport_serial *edge_serial; struct edgeport_port *edge_port; struct usb_device *dev; + struct device *ddev = &serial->dev->dev; int i, j; int response; bool interrupt_in_found; @@ -2974,32 +2929,31 @@ static int edge_startup(struct usb_serial *serial) /* serial->num_ports = serial->product_info.NumPorts; */ if ((!edge_serial->is_epic) && (edge_serial->product_info.NumPorts != serial->num_ports)) { - dev_warn(&serial->dev->dev, "Device Reported %d serial ports " - "vs. core thinking we have %d ports, email " - "greg@kroah.com this information.\n", + dev_warn(ddev, + "Device Reported %d serial ports vs. core thinking we have %d ports, email greg@kroah.com this information.\n", edge_serial->product_info.NumPorts, serial->num_ports); } - dbg("%s - time 1 %ld", __func__, jiffies); + dev_dbg(ddev, "%s - time 1 %ld\n", __func__, jiffies); /* If not an EPiC device */ if (!edge_serial->is_epic) { /* now load the application firmware into this device */ load_application_firmware(edge_serial); - dbg("%s - time 2 %ld", __func__, jiffies); + dev_dbg(ddev, "%s - time 2 %ld\n", __func__, jiffies); /* Check current Edgeport EEPROM and update if necessary */ update_edgeport_E2PROM(edge_serial); - dbg("%s - time 3 %ld", __func__, jiffies); + dev_dbg(ddev, "%s - time 3 %ld\n", __func__, jiffies); /* set the configuration to use #1 */ -/* dbg("set_configuration 1"); */ +/* dev_dbg(ddev, "set_configuration 1\n"); */ /* usb_set_configuration (dev, 1); */ } - dbg(" FirmwareMajorVersion %d.%d.%d", + dev_dbg(ddev, " FirmwareMajorVersion %d.%d.%d\n", edge_serial->product_info.FirmwareMajorVersion, edge_serial->product_info.FirmwareMinorVersion, le16_to_cpu(edge_serial->product_info.FirmwareBuildNumber)); @@ -3011,8 +2965,7 @@ static int edge_startup(struct usb_serial *serial) for (i = 0; i < serial->num_ports; ++i) { edge_port = kzalloc(sizeof(struct edgeport_port), GFP_KERNEL); if (edge_port == NULL) { - dev_err(&serial->dev->dev, "%s - Out of memory\n", - __func__); + dev_err(ddev, "%s - Out of memory\n", __func__); for (j = 0; j < i; ++j) { kfree(usb_get_serial_port_data(serial->port[j])); usb_set_serial_port_data(serial->port[j], @@ -3044,19 +2997,19 @@ static int edge_startup(struct usb_serial *serial) if (!interrupt_in_found && (usb_endpoint_is_int_in(endpoint))) { /* we found a interrupt in endpoint */ - dbg("found interrupt in"); + dev_dbg(ddev, "found interrupt in\n"); /* not set up yet, so do it now */ edge_serial->interrupt_read_urb = usb_alloc_urb(0, GFP_KERNEL); if (!edge_serial->interrupt_read_urb) { - dev_err(&dev->dev, "out of memory\n"); + dev_err(ddev, "out of memory\n"); return -ENOMEM; } edge_serial->interrupt_in_buffer = kmalloc(buffer_size, GFP_KERNEL); if (!edge_serial->interrupt_in_buffer) { - dev_err(&dev->dev, "out of memory\n"); + dev_err(ddev, "out of memory\n"); usb_free_urb(edge_serial->interrupt_read_urb); return -ENOMEM; } @@ -3081,13 +3034,13 @@ static int edge_startup(struct usb_serial *serial) if (!bulk_in_found && (usb_endpoint_is_bulk_in(endpoint))) { /* we found a bulk in endpoint */ - dbg("found bulk in"); + dev_dbg(ddev, "found bulk in\n"); /* not set up yet, so do it now */ edge_serial->read_urb = usb_alloc_urb(0, GFP_KERNEL); if (!edge_serial->read_urb) { - dev_err(&dev->dev, "out of memory\n"); + dev_err(ddev, "out of memory\n"); return -ENOMEM; } edge_serial->bulk_in_buffer = @@ -3114,7 +3067,7 @@ static int edge_startup(struct usb_serial *serial) if (!bulk_out_found && (usb_endpoint_is_bulk_out(endpoint))) { /* we found a bulk out endpoint */ - dbg("found bulk out"); + dev_dbg(ddev, "found bulk out\n"); edge_serial->bulk_out_endpoint = endpoint->bEndpointAddress; bulk_out_found = true; @@ -3122,8 +3075,7 @@ static int edge_startup(struct usb_serial *serial) } if (!interrupt_in_found || !bulk_in_found || !bulk_out_found) { - dev_err(&dev->dev, "Error - the proper endpoints " - "were not found!\n"); + dev_err(ddev, "Error - the proper endpoints were not found!\n"); return -ENODEV; } @@ -3132,8 +3084,7 @@ static int edge_startup(struct usb_serial *serial) response = usb_submit_urb(edge_serial->interrupt_read_urb, GFP_KERNEL); if (response) - dev_err(&dev->dev, - "%s - Error %d submitting control urb\n", + dev_err(ddev, "%s - Error %d submitting control urb\n", __func__, response); } return response; @@ -3148,8 +3099,6 @@ static void edge_disconnect(struct usb_serial *serial) { struct edgeport_serial *edge_serial = usb_get_serial_data(serial); - dbg("%s", __func__); - /* stop reads and writes on all ports */ /* free up our endpoint stuff */ if (edge_serial->is_epic) { @@ -3173,8 +3122,6 @@ static void edge_release(struct usb_serial *serial) struct edgeport_serial *edge_serial = usb_get_serial_data(serial); int i; - dbg("%s", __func__); - for (i = 0; i < serial->num_ports; ++i) kfree(usb_get_serial_port_data(serial->port[i])); @@ -3190,6 +3137,3 @@ MODULE_FIRMWARE("edgeport/boot.fw"); MODULE_FIRMWARE("edgeport/boot2.fw"); MODULE_FIRMWARE("edgeport/down.fw"); MODULE_FIRMWARE("edgeport/down2.fw"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index 765978ae752e..a2209cd45093 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -201,8 +201,6 @@ static unsigned char OperationalMajorVersion; static unsigned char OperationalMinorVersion; static unsigned short OperationalBuildNumber; -static bool debug; - static int closing_wait = EDGE_CLOSING_WAIT; static bool ignore_cpu_rev; static int default_uart_mode; /* RS232 */ @@ -233,8 +231,8 @@ static int ti_vread_sync(struct usb_device *dev, __u8 request, if (status < 0) return status; if (status != size) { - dbg("%s - wanted to write %d, but only wrote %d", - __func__, size, status); + dev_dbg(&dev->dev, "%s - wanted to write %d, but only wrote %d\n", + __func__, size, status); return -ECOMM; } return 0; @@ -251,8 +249,8 @@ static int ti_vsend_sync(struct usb_device *dev, __u8 request, if (status < 0) return status; if (status != size) { - dbg("%s - wanted to write %d, but only wrote %d", - __func__, size, status); + dev_dbg(&dev->dev, "%s - wanted to write %d, but only wrote %d\n", + __func__, size, status); return -ECOMM; } return 0; @@ -270,7 +268,7 @@ static int purge_port(struct usb_serial_port *port, __u16 mask) { int port_number = port->number - port->serial->minor; - dbg("%s - port %d, mask %x", __func__, port_number, mask); + dev_dbg(&port->dev, "%s - port %d, mask %x\n", __func__, port_number, mask); return send_cmd(port->serial->dev, UMPC_PURGE_PORT, @@ -295,7 +293,7 @@ static int read_download_mem(struct usb_device *dev, int start_address, __u8 read_length; __be16 be_start_address; - dbg("%s - @ %x for %d", __func__, start_address, length); + dev_dbg(&dev->dev, "%s - @ %x for %d\n", __func__, start_address, length); /* Read in blocks of 64 bytes * (TI firmware can't handle more than 64 byte reads) @@ -307,8 +305,7 @@ static int read_download_mem(struct usb_device *dev, int start_address, read_length = (__u8)length; if (read_length > 1) { - dbg("%s - @ %x for %d", __func__, - start_address, read_length); + dev_dbg(&dev->dev, "%s - @ %x for %d\n", __func__, start_address, read_length); } be_start_address = cpu_to_be16(start_address); status = ti_vread_sync(dev, UMPC_MEMORY_READ, @@ -317,13 +314,12 @@ static int read_download_mem(struct usb_device *dev, int start_address, buffer, read_length); if (status) { - dbg("%s - ERROR %x", __func__, status); + dev_dbg(&dev->dev, "%s - ERROR %x\n", __func__, status); return status; } if (read_length > 1) - usb_serial_debug_data(debug, &dev->dev, __func__, - read_length, buffer); + usb_serial_debug_data(&dev->dev, __func__, read_length, buffer); /* Update pointers/length */ start_address += read_length; @@ -353,15 +349,14 @@ static int read_boot_mem(struct edgeport_serial *serial, UMPC_MEMORY_READ, serial->TI_I2C_Type, (__u16)(start_address+i), &buffer[i], 0x01); if (status) { - dbg("%s - ERROR %x", __func__, status); + dev_dbg(&serial->serial->dev->dev, "%s - ERROR %x\n", __func__, status); return status; } } - dbg("%s - start_address = %x, length = %d", - __func__, start_address, length); - usb_serial_debug_data(debug, &serial->serial->dev->dev, - __func__, length, buffer); + dev_dbg(&serial->serial->dev->dev, "%s - start_address = %x, length = %d\n", + __func__, start_address, length); + usb_serial_debug_data(&serial->serial->dev->dev, __func__, length, buffer); serial->TiReadI2C = 1; @@ -398,10 +393,8 @@ static int write_boot_mem(struct edgeport_serial *serial, return status; } - dbg("%s - start_sddr = %x, length = %d", - __func__, start_address, length); - usb_serial_debug_data(debug, &serial->serial->dev->dev, - __func__, length, buffer); + dev_dbg(&serial->serial->dev->dev, "%s - start_sddr = %x, length = %d\n", __func__, start_address, length); + usb_serial_debug_data(&serial->serial->dev->dev, __func__, length, buffer); return status; } @@ -411,6 +404,7 @@ static int write_boot_mem(struct edgeport_serial *serial, static int write_i2c_mem(struct edgeport_serial *serial, int start_address, int length, __u8 address_type, __u8 *buffer) { + struct device *dev = &serial->serial->dev->dev; int status = 0; int write_length; __be16 be_start_address; @@ -424,10 +418,9 @@ static int write_i2c_mem(struct edgeport_serial *serial, if (write_length > length) write_length = length; - dbg("%s - BytesInFirstPage Addr = %x, length = %d", - __func__, start_address, write_length); - usb_serial_debug_data(debug, &serial->serial->dev->dev, - __func__, write_length, buffer); + dev_dbg(dev, "%s - BytesInFirstPage Addr = %x, length = %d\n", + __func__, start_address, write_length); + usb_serial_debug_data(dev, __func__, write_length, buffer); /* Write first page */ be_start_address = cpu_to_be16(start_address); @@ -436,7 +429,7 @@ static int write_i2c_mem(struct edgeport_serial *serial, (__force __u16)be_start_address, buffer, write_length); if (status) { - dbg("%s - ERROR %d", __func__, status); + dev_dbg(dev, "%s - ERROR %d\n", __func__, status); return status; } @@ -452,10 +445,9 @@ static int write_i2c_mem(struct edgeport_serial *serial, else write_length = length; - dbg("%s - Page Write Addr = %x, length = %d", - __func__, start_address, write_length); - usb_serial_debug_data(debug, &serial->serial->dev->dev, - __func__, write_length, buffer); + dev_dbg(dev, "%s - Page Write Addr = %x, length = %d\n", + __func__, start_address, write_length); + usb_serial_debug_data(dev, __func__, write_length, buffer); /* Write next page */ be_start_address = cpu_to_be16(start_address); @@ -464,8 +456,7 @@ static int write_i2c_mem(struct edgeport_serial *serial, (__force __u16)be_start_address, buffer, write_length); if (status) { - dev_err(&serial->serial->dev->dev, "%s - ERROR %d\n", - __func__, status); + dev_err(dev, "%s - ERROR %d\n", __func__, status); return status; } @@ -508,7 +499,7 @@ static int tx_active(struct edgeport_port *port) if (status) goto exit_is_tx_active; - dbg("%s - XByteCount 0x%X", __func__, oedb->XByteCount); + dev_dbg(&port->port->dev, "%s - XByteCount 0x%X\n", __func__, oedb->XByteCount); /* and the LSR */ status = read_ram(port->port->serial->dev, @@ -516,7 +507,7 @@ static int tx_active(struct edgeport_port *port) if (status) goto exit_is_tx_active; - dbg("%s - LSR = 0x%X", __func__, *lsr); + dev_dbg(&port->port->dev, "%s - LSR = 0x%X\n", __func__, *lsr); /* If either buffer has data or we are transmitting then return TRUE */ if ((oedb->XByteCount & 0x80) != 0) @@ -527,7 +518,7 @@ static int tx_active(struct edgeport_port *port) /* We return Not Active if we get any kind of error */ exit_is_tx_active: - dbg("%s - return %d", __func__, bytes_left); + dev_dbg(&port->port->dev, "%s - return %d\n", __func__, bytes_left); kfree(lsr); kfree(oedb); @@ -599,14 +590,13 @@ static int choose_config(struct usb_device *dev) * configuration # 1, which is Config Descriptor 0. */ - dbg("%s - Number of Interfaces = %d", - __func__, dev->config->desc.bNumInterfaces); - dbg("%s - MAX Power = %d", - __func__, dev->config->desc.bMaxPower * 2); + dev_dbg(&dev->dev, "%s - Number of Interfaces = %d\n", + __func__, dev->config->desc.bNumInterfaces); + dev_dbg(&dev->dev, "%s - MAX Power = %d\n", + __func__, dev->config->desc.bMaxPower * 2); if (dev->config->desc.bNumInterfaces != 1) { - dev_err(&dev->dev, "%s - bNumInterfaces is not 1, ERROR!\n", - __func__); + dev_err(&dev->dev, "%s - bNumInterfaces is not 1, ERROR!\n", __func__); return -ENODEV; } @@ -684,7 +674,7 @@ static int valid_csum(struct ti_i2c_desc *rom_desc, __u8 *buffer) cs = (__u8)(cs + buffer[i]); if (cs != rom_desc->CheckSum) { - dbg("%s - Mismatch %x - %x", __func__, rom_desc->CheckSum, cs); + pr_debug("%s - Mismatch %x - %x", __func__, rom_desc->CheckSum, cs); return -EINVAL; } return 0; @@ -736,11 +726,11 @@ static int check_i2c_image(struct edgeport_serial *serial) if ((start_address + sizeof(struct ti_i2c_desc) + rom_desc->Size) > TI_MAX_I2C_SIZE) { status = -ENODEV; - dbg("%s - structure too big, erroring out.", __func__); + dev_dbg(dev, "%s - structure too big, erroring out.\n", __func__); break; } - dbg("%s Type = 0x%x", __func__, rom_desc->Type); + dev_dbg(dev, "%s Type = 0x%x\n", __func__, rom_desc->Type); /* Skip type 2 record */ ttype = rom_desc->Type & 0x0f; @@ -779,18 +769,18 @@ static int get_manuf_info(struct edgeport_serial *serial, __u8 *buffer) int start_address; struct ti_i2c_desc *rom_desc; struct edge_ti_manuf_descriptor *desc; + struct device *dev = &serial->serial->dev->dev; rom_desc = kmalloc(sizeof(*rom_desc), GFP_KERNEL); if (!rom_desc) { - dev_err(&serial->serial->dev->dev, "%s - out of memory\n", - __func__); + dev_err(dev, "%s - out of memory\n", __func__); return -ENOMEM; } start_address = get_descriptor_addr(serial, I2C_DESC_TYPE_ION, rom_desc); if (!start_address) { - dbg("%s - Edge Descriptor not found in I2C", __func__); + dev_dbg(dev, "%s - Edge Descriptor not found in I2C\n", __func__); status = -ENODEV; goto exit; } @@ -804,12 +794,12 @@ static int get_manuf_info(struct edgeport_serial *serial, __u8 *buffer) status = valid_csum(rom_desc, buffer); desc = (struct edge_ti_manuf_descriptor *)buffer; - dbg("%s - IonConfig 0x%x", __func__, desc->IonConfig); - dbg("%s - Version %d", __func__, desc->Version); - dbg("%s - Cpu/Board 0x%x", __func__, desc->CpuRev_BoardRev); - dbg("%s - NumPorts %d", __func__, desc->NumPorts); - dbg("%s - NumVirtualPorts %d", __func__, desc->NumVirtualPorts); - dbg("%s - TotalPorts %d", __func__, desc->TotalPorts); + dev_dbg(dev, "%s - IonConfig 0x%x\n", __func__, desc->IonConfig); + dev_dbg(dev, "%s - Version %d\n", __func__, desc->Version); + dev_dbg(dev, "%s - Cpu/Board 0x%x\n", __func__, desc->CpuRev_BoardRev); + dev_dbg(dev, "%s - NumPorts %d\n", __func__, desc->NumPorts); + dev_dbg(dev, "%s - NumVirtualPorts %d\n", __func__, desc->NumVirtualPorts); + dev_dbg(dev, "%s - TotalPorts %d\n", __func__, desc->TotalPorts); exit: kfree(rom_desc); @@ -855,8 +845,8 @@ static int build_i2c_fw_hdr(__u8 *header, struct device *dev) err = request_firmware(&fw, fw_name, dev); if (err) { - printk(KERN_ERR "Failed to load image \"%s\" err %d\n", - fw_name, err); + dev_err(dev, "Failed to load image \"%s\" err %d\n", + fw_name, err); kfree(buffer); return err; } @@ -903,13 +893,13 @@ static int build_i2c_fw_hdr(__u8 *header, struct device *dev) /* Try to figure out what type of I2c we have */ static int i2c_type_bootmode(struct edgeport_serial *serial) { + struct device *dev = &serial->serial->dev->dev; int status; u8 *data; data = kmalloc(1, GFP_KERNEL); if (!data) { - dev_err(&serial->serial->dev->dev, - "%s - out of memory\n", __func__); + dev_err(dev, "%s - out of memory\n", __func__); return -ENOMEM; } @@ -917,11 +907,11 @@ static int i2c_type_bootmode(struct edgeport_serial *serial) status = ti_vread_sync(serial->serial->dev, UMPC_MEMORY_READ, DTK_ADDR_SPACE_I2C_TYPE_II, 0, data, 0x01); if (status) - dbg("%s - read 2 status error = %d", __func__, status); + dev_dbg(dev, "%s - read 2 status error = %d\n", __func__, status); else - dbg("%s - read 2 data = 0x%x", __func__, *data); + dev_dbg(dev, "%s - read 2 data = 0x%x\n", __func__, *data); if ((!status) && (*data == UMP5152 || *data == UMP3410)) { - dbg("%s - ROM_TYPE_II", __func__); + dev_dbg(dev, "%s - ROM_TYPE_II\n", __func__); serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_II; goto out; } @@ -930,16 +920,16 @@ static int i2c_type_bootmode(struct edgeport_serial *serial) status = ti_vread_sync(serial->serial->dev, UMPC_MEMORY_READ, DTK_ADDR_SPACE_I2C_TYPE_III, 0, data, 0x01); if (status) - dbg("%s - read 3 status error = %d", __func__, status); + dev_dbg(dev, "%s - read 3 status error = %d\n", __func__, status); else - dbg("%s - read 2 data = 0x%x", __func__, *data); + dev_dbg(dev, "%s - read 2 data = 0x%x\n", __func__, *data); if ((!status) && (*data == UMP5152 || *data == UMP3410)) { - dbg("%s - ROM_TYPE_III", __func__); + dev_dbg(dev, "%s - ROM_TYPE_III\n", __func__); serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_III; goto out; } - dbg("%s - Unknown", __func__); + dev_dbg(dev, "%s - Unknown\n", __func__); serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_II; status = -ENODEV; out: @@ -1050,11 +1040,11 @@ static int download_fw(struct edgeport_serial *serial) if (serial->product_info.TiMode == TI_MODE_DOWNLOAD) { struct ti_i2c_desc *rom_desc; - dbg("%s - RUNNING IN DOWNLOAD MODE", __func__); + dev_dbg(dev, "%s - RUNNING IN DOWNLOAD MODE\n", __func__); status = check_i2c_image(serial); if (status) { - dbg("%s - DOWNLOAD MODE -- BAD I2C", __func__); + dev_dbg(dev, "%s - DOWNLOAD MODE -- BAD I2C\n", __func__); return status; } @@ -1074,7 +1064,7 @@ static int download_fw(struct edgeport_serial *serial) /* Check version number of ION descriptor */ if (!ignore_cpu_rev && ti_cpu_rev(ti_manuf_desc) < 2) { - dbg("%s - Wrong CPU Rev %d (Must be 2)", + dev_dbg(dev, "%s - Wrong CPU Rev %d (Must be 2)\n", __func__, ti_cpu_rev(ti_manuf_desc)); kfree(ti_manuf_desc); return -EINVAL; @@ -1094,8 +1084,7 @@ static int download_fw(struct edgeport_serial *serial) struct ti_i2c_firmware_rec *firmware_version; u8 *record; - dbg("%s - Found Type FIRMWARE (Type 2) record", - __func__); + dev_dbg(dev, "%s - Found Type FIRMWARE (Type 2) record\n", __func__); firmware_version = kmalloc(sizeof(*firmware_version), GFP_KERNEL); @@ -1127,22 +1116,21 @@ static int download_fw(struct edgeport_serial *serial) download_new_ver = (OperationalMajorVersion << 8) + (OperationalMinorVersion); - dbg("%s - >> FW Versions Device %d.%d Driver %d.%d", - __func__, - firmware_version->Ver_Major, - firmware_version->Ver_Minor, - OperationalMajorVersion, - OperationalMinorVersion); + dev_dbg(dev, "%s - >> FW Versions Device %d.%d Driver %d.%d\n", + __func__, firmware_version->Ver_Major, + firmware_version->Ver_Minor, + OperationalMajorVersion, + OperationalMinorVersion); /* Check if we have an old version in the I2C and update if necessary */ if (download_cur_ver < download_new_ver) { - dbg("%s - Update I2C dld from %d.%d to %d.%d", - __func__, - firmware_version->Ver_Major, - firmware_version->Ver_Minor, - OperationalMajorVersion, - OperationalMinorVersion); + dev_dbg(dev, "%s - Update I2C dld from %d.%d to %d.%d\n", + __func__, + firmware_version->Ver_Major, + firmware_version->Ver_Minor, + OperationalMajorVersion, + OperationalMinorVersion); record = kmalloc(1, GFP_KERNEL); if (!record) { @@ -1196,9 +1184,7 @@ static int download_fw(struct edgeport_serial *serial) } if (*record != I2C_DESC_TYPE_FIRMWARE_BLANK) { - dev_err(dev, - "%s - error resetting device\n", - __func__); + dev_err(dev, "%s - error resetting device\n", __func__); kfree(record); kfree(firmware_version); kfree(rom_desc); @@ -1206,15 +1192,14 @@ static int download_fw(struct edgeport_serial *serial) return -ENODEV; } - dbg("%s - HARDWARE RESET", __func__); + dev_dbg(dev, "%s - HARDWARE RESET\n", __func__); /* Reset UMP -- Back to BOOT MODE */ status = ti_vsend_sync(serial->serial->dev, UMPC_HARDWARE_RESET, 0, 0, NULL, 0); - dbg("%s - HARDWARE RESET return %d", - __func__, status); + dev_dbg(dev, "%s - HARDWARE RESET return %d\n", __func__, status); /* return an error on purpose. */ kfree(record); @@ -1249,8 +1234,7 @@ static int download_fw(struct edgeport_serial *serial) return -ENOMEM; } - dbg("%s - Found Type BLANK FIRMWARE (Type F2) record", - __func__); + dev_dbg(dev, "%s - Found Type BLANK FIRMWARE (Type F2) record\n", __func__); /* * In order to update the I2C firmware we must change @@ -1292,7 +1276,7 @@ static int download_fw(struct edgeport_serial *serial) HEADER_SIZE, vheader); if (status) { - dbg("%s - can't read header back", __func__); + dev_dbg(dev, "%s - can't read header back\n", __func__); kfree(vheader); kfree(header); kfree(rom_desc); @@ -1300,8 +1284,7 @@ static int download_fw(struct edgeport_serial *serial) return status; } if (memcmp(vheader, header, HEADER_SIZE)) { - dbg("%s - write download record failed", - __func__); + dev_dbg(dev, "%s - write download record failed\n", __func__); kfree(vheader); kfree(header); kfree(rom_desc); @@ -1312,13 +1295,13 @@ static int download_fw(struct edgeport_serial *serial) kfree(vheader); kfree(header); - dbg("%s - Start firmware update", __func__); + dev_dbg(dev, "%s - Start firmware update\n", __func__); /* Tell firmware to copy download image into I2C */ status = ti_vsend_sync(serial->serial->dev, UMPC_COPY_DNLD_TO_I2C, 0, 0, NULL, 0); - dbg("%s - Update complete 0x%x", __func__, status); + dev_dbg(dev, "%s - Update complete 0x%x\n", __func__, status); if (status) { dev_err(dev, "%s - UMPC_COPY_DNLD_TO_I2C failed\n", @@ -1338,7 +1321,7 @@ static int download_fw(struct edgeport_serial *serial) /********************************************************************/ /* Boot Mode */ /********************************************************************/ - dbg("%s - RUNNING IN BOOT MODE", __func__); + dev_dbg(dev, "%s - RUNNING IN BOOT MODE\n", __func__); /* Configure the TI device so we can use the BULK pipes for download */ status = config_boot_dev(serial->serial->dev); @@ -1347,8 +1330,8 @@ static int download_fw(struct edgeport_serial *serial) if (le16_to_cpu(serial->serial->dev->descriptor.idVendor) != USB_VENDOR_ID_ION) { - dbg("%s - VID = 0x%x", __func__, - le16_to_cpu(serial->serial->dev->descriptor.idVendor)); + dev_dbg(dev, "%s - VID = 0x%x\n", __func__, + le16_to_cpu(serial->serial->dev->descriptor.idVendor)); serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_II; goto stayinbootmode; } @@ -1385,8 +1368,8 @@ static int download_fw(struct edgeport_serial *serial) /* Check for version 2 */ if (!ignore_cpu_rev && ti_cpu_rev(ti_manuf_desc) < 2) { - dbg("%s - Wrong CPU Rev %d (Must be 2)", - __func__, ti_cpu_rev(ti_manuf_desc)); + dev_dbg(dev, "%s - Wrong CPU Rev %d (Must be 2)\n", + __func__, ti_cpu_rev(ti_manuf_desc)); kfree(ti_manuf_desc); goto stayinbootmode; } @@ -1421,8 +1404,8 @@ static int download_fw(struct edgeport_serial *serial) err = request_firmware(&fw, fw_name, dev); if (err) { - printk(KERN_ERR "Failed to load image \"%s\" err %d\n", - fw_name, err); + dev_err(dev, "Failed to load image \"%s\" err %d\n", + fw_name, err); kfree(buffer); return err; } @@ -1442,23 +1425,20 @@ static int download_fw(struct edgeport_serial *serial) header->CheckSum = cs; /* Download the operational code */ - dbg("%s - Downloading operational code image (TI UMP)", - __func__); + dev_dbg(dev, "%s - Downloading operational code image (TI UMP)\n", __func__); status = download_code(serial, buffer, buffer_size); kfree(buffer); if (status) { - dbg("%s - Error downloading operational code image", - __func__); + dev_dbg(dev, "%s - Error downloading operational code image\n", __func__); return status; } /* Device will reboot */ serial->product_info.TiMode = TI_MODE_TRANSITIONING; - dbg("%s - Download successful -- Device rebooting...", - __func__); + dev_dbg(dev, "%s - Download successful -- Device rebooting...\n", __func__); /* return an error on purpose */ return -ENODEV; @@ -1466,7 +1446,7 @@ static int download_fw(struct edgeport_serial *serial) stayinbootmode: /* Eprom is invalid or blank stay in boot mode */ - dbg("%s - STAYING IN BOOT MODE", __func__); + dev_dbg(dev, "%s - STAYING IN BOOT MODE\n", __func__); serial->product_info.TiMode = TI_MODE_BOOT; return 0; @@ -1487,7 +1467,7 @@ static int restore_mcr(struct edgeport_port *port, __u8 mcr) { int status = 0; - dbg("%s - %x", __func__, mcr); + dev_dbg(&port->port->dev, "%s - %x\n", __func__, mcr); status = ti_do_config(port, UMPC_SET_CLR_DTR, mcr & MCR_DTR); if (status) @@ -1524,7 +1504,7 @@ static void handle_new_msr(struct edgeport_port *edge_port, __u8 msr) struct async_icount *icount; struct tty_struct *tty; - dbg("%s - %02x", __func__, msr); + dev_dbg(&edge_port->port->dev, "%s - %02x\n", __func__, msr); if (msr & (EDGEPORT_MSR_DELTA_CTS | EDGEPORT_MSR_DELTA_DSR | EDGEPORT_MSR_DELTA_RI | EDGEPORT_MSR_DELTA_CD)) { @@ -1566,7 +1546,7 @@ static void handle_new_lsr(struct edgeport_port *edge_port, int lsr_data, LSR_FRM_ERR | LSR_BREAK)); struct tty_struct *tty; - dbg("%s - %02x", __func__, new_lsr); + dev_dbg(&edge_port->port->dev, "%s - %02x\n", __func__, new_lsr); edge_port->shadow_lsr = lsr; @@ -1604,6 +1584,7 @@ static void edge_interrupt_callback(struct urb *urb) struct edgeport_serial *edge_serial = urb->context; struct usb_serial_port *port; struct edgeport_port *edge_port; + struct device *dev; unsigned char *data = urb->transfer_buffer; int length = urb->actual_length; int port_number; @@ -1613,8 +1594,6 @@ static void edge_interrupt_callback(struct urb *urb) __u8 msr; int status = urb->status; - dbg("%s", __func__); - switch (status) { case 0: /* success */ @@ -1623,7 +1602,7 @@ static void edge_interrupt_callback(struct urb *urb) case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", + dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d\n", __func__, status); return; default: @@ -1633,27 +1612,26 @@ static void edge_interrupt_callback(struct urb *urb) } if (!length) { - dbg("%s - no data in urb", __func__); + dev_dbg(&urb->dev->dev, "%s - no data in urb\n", __func__); goto exit; } - usb_serial_debug_data(debug, &edge_serial->serial->dev->dev, - __func__, length, data); + dev = &edge_serial->serial->dev->dev; + usb_serial_debug_data(dev, __func__, length, data); if (length != 2) { - dbg("%s - expecting packet of size 2, got %d", - __func__, length); + dev_dbg(dev, "%s - expecting packet of size 2, got %d\n", __func__, length); goto exit; } port_number = TIUMP_GET_PORT_FROM_CODE(data[0]); function = TIUMP_GET_FUNC_FROM_CODE(data[0]); - dbg("%s - port_number %d, function %d, info 0x%x", - __func__, port_number, function, data[1]); + dev_dbg(dev, "%s - port_number %d, function %d, info 0x%x\n", __func__, + port_number, function, data[1]); port = edge_serial->serial->port[port_number]; edge_port = usb_get_serial_port_data(port); if (!edge_port) { - dbg("%s - edge_port not found", __func__); + dev_dbg(dev, "%s - edge_port not found\n", __func__); return; } switch (function) { @@ -1662,13 +1640,13 @@ static void edge_interrupt_callback(struct urb *urb) if (lsr & UMP_UART_LSR_DATA_MASK) { /* Save the LSR event for bulk read completion routine */ - dbg("%s - LSR Event Port %u LSR Status = %02x", - __func__, port_number, lsr); + dev_dbg(dev, "%s - LSR Event Port %u LSR Status = %02x\n", + __func__, port_number, lsr); edge_port->lsr_event = 1; edge_port->lsr_mask = lsr; } else { - dbg("%s - ===== Port %d LSR Status = %02x ======", - __func__, port_number, lsr); + dev_dbg(dev, "%s - ===== Port %d LSR Status = %02x ======\n", + __func__, port_number, lsr); handle_new_lsr(edge_port, 0, lsr, 0); } break; @@ -1676,8 +1654,8 @@ static void edge_interrupt_callback(struct urb *urb) case TIUMP_INTERRUPT_CODE_MSR: /* MSR */ /* Copy MSR from UMP */ msr = data[1]; - dbg("%s - ===== Port %u MSR Status = %02x ======", - __func__, port_number, msr); + dev_dbg(dev, "%s - ===== Port %u MSR Status = %02x ======\n", + __func__, port_number, msr); handle_new_msr(edge_port, msr); break; @@ -1700,14 +1678,13 @@ exit: static void edge_bulk_in_callback(struct urb *urb) { struct edgeport_port *edge_port = urb->context; + struct device *dev = &edge_port->port->dev; unsigned char *data = urb->transfer_buffer; struct tty_struct *tty; int retval = 0; int port_number; int status = urb->status; - dbg("%s", __func__); - switch (status) { case 0: /* success */ @@ -1716,13 +1693,10 @@ static void edge_bulk_in_callback(struct urb *urb) case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", - __func__, status); + dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d\n", __func__, status); return; default: - dev_err(&urb->dev->dev, - "%s - nonzero read bulk status received: %d\n", - __func__, status); + dev_err(&urb->dev->dev, "%s - nonzero read bulk status received: %d\n", __func__, status); } if (status == -EPIPE) @@ -1737,8 +1711,8 @@ static void edge_bulk_in_callback(struct urb *urb) if (edge_port->lsr_event) { edge_port->lsr_event = 0; - dbg("%s ===== Port %u LSR Status = %02x, Data = %02x ======", - __func__, port_number, edge_port->lsr_mask, *data); + dev_dbg(dev, "%s ===== Port %u LSR Status = %02x, Data = %02x ======\n", + __func__, port_number, edge_port->lsr_mask, *data); handle_new_lsr(edge_port, 1, edge_port->lsr_mask, *data); /* Adjust buffer length/pointer */ --urb->actual_length; @@ -1747,14 +1721,12 @@ static void edge_bulk_in_callback(struct urb *urb) tty = tty_port_tty_get(&edge_port->port->port); if (tty && urb->actual_length) { - usb_serial_debug_data(debug, &edge_port->port->dev, - __func__, urb->actual_length, data); + usb_serial_debug_data(dev, __func__, urb->actual_length, data); if (edge_port->close_pending) - dbg("%s - close pending, dropping data on the floor", + dev_dbg(dev, "%s - close pending, dropping data on the floor\n", __func__); else - edge_tty_recv(&edge_port->port->dev, tty, data, - urb->actual_length); + edge_tty_recv(dev, tty, data, urb->actual_length); edge_port->icount.rx += urb->actual_length; } tty_kref_put(tty); @@ -1769,9 +1741,7 @@ exit: spin_unlock(&edge_port->ep_lock); if (retval) - dev_err(&urb->dev->dev, - "%s - usb_submit_urb failed with result %d\n", - __func__, retval); + dev_err(dev, "%s - usb_submit_urb failed with result %d\n", __func__, retval); } static void edge_tty_recv(struct device *dev, struct tty_struct *tty, @@ -1793,8 +1763,6 @@ static void edge_bulk_out_callback(struct urb *urb) int status = urb->status; struct tty_struct *tty; - dbg("%s - port %d", __func__, port->number); - edge_port->ep_write_urb_in_use = 0; switch (status) { @@ -1805,7 +1773,7 @@ static void edge_bulk_out_callback(struct urb *urb) case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", + dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d\n", __func__, status); return; default: @@ -1830,8 +1798,6 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port) u16 open_settings; u8 transaction_timeout; - dbg("%s - port %d", __func__, port->number); - if (edge_port == NULL) return -ENODEV; @@ -1850,9 +1816,8 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port) return -ENODEV; } - dbg("%s - port_number = %d, uart_base = %04x, dma_address = %04x", - __func__, port_number, edge_port->uart_base, - edge_port->dma_address); + dev_dbg(&port->dev, "%s - port_number = %d, uart_base = %04x, dma_address = %04x\n", + __func__, port_number, edge_port->uart_base, edge_port->dma_address); dev = port->serial->dev; @@ -1885,7 +1850,7 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port) UMP_PIPE_TRANS_TIMEOUT_ENA | (transaction_timeout << 2)); - dbg("%s - Sending UMPC_OPEN_PORT", __func__); + dev_dbg(&port->dev, "%s - Sending UMPC_OPEN_PORT\n", __func__); /* Tell TI to open and start the port */ status = send_cmd(dev, UMPC_OPEN_PORT, @@ -1924,11 +1889,11 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port) return status; } - dbg("ShadowMSR 0x%X", edge_port->shadow_msr); + dev_dbg(&port->dev, "ShadowMSR 0x%X\n", edge_port->shadow_msr); /* Set Initial MCR */ edge_port->shadow_mcr = MCR_RTS | MCR_DTR; - dbg("ShadowMCR 0x%X", edge_port->shadow_mcr); + dev_dbg(&port->dev, "ShadowMCR 0x%X\n", edge_port->shadow_mcr); edge_serial = edge_port->edge_serial; if (mutex_lock_interruptible(&edge_serial->es_lock)) @@ -1980,8 +1945,6 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port) ++edge_serial->num_ports_open; - dbg("%s - exited", __func__); - goto release_es_lock; unlink_int_urb: @@ -1999,8 +1962,6 @@ static void edge_close(struct usb_serial_port *port) struct usb_serial *serial = port->serial; int port_number; - dbg("%s - port %d", __func__, port->number); - edge_serial = usb_get_serial_data(port->serial); edge_port = usb_get_serial_port_data(port); if (edge_serial == NULL || edge_port == NULL) @@ -2019,7 +1980,7 @@ static void edge_close(struct usb_serial_port *port) /* assuming we can still talk to the device, * send a close port command to it */ - dbg("%s - send umpc_close_port", __func__); + dev_dbg(&port->dev, "%s - send umpc_close_port\n", __func__); port_number = port->number - port->serial->minor; mutex_lock(&serial->disc_mutex); @@ -2042,8 +2003,6 @@ static void edge_close(struct usb_serial_port *port) } mutex_unlock(&edge_serial->es_lock); edge_port->close_pending = 0; - - dbg("%s - exited", __func__); } static int edge_write(struct tty_struct *tty, struct usb_serial_port *port, @@ -2051,10 +2010,8 @@ static int edge_write(struct tty_struct *tty, struct usb_serial_port *port, { struct edgeport_port *edge_port = usb_get_serial_port_data(port); - dbg("%s - port %d", __func__, port->number); - if (count == 0) { - dbg("%s - write request of 0 bytes", __func__); + dev_dbg(&port->dev, "%s - write request of 0 bytes\n", __func__); return 0; } @@ -2077,9 +2034,6 @@ static void edge_send(struct tty_struct *tty) struct edgeport_port *edge_port = usb_get_serial_port_data(port); unsigned long flags; - - dbg("%s - port %d", __func__, port->number); - spin_lock_irqsave(&edge_port->ep_lock, flags); if (edge_port->ep_write_urb_in_use) { @@ -2100,8 +2054,7 @@ static void edge_send(struct tty_struct *tty) spin_unlock_irqrestore(&edge_port->ep_lock, flags); - usb_serial_debug_data(debug, &port->dev, __func__, count, - port->write_urb->transfer_buffer); + usb_serial_debug_data(&port->dev, __func__, count, port->write_urb->transfer_buffer); /* set up our urb */ port->write_urb->transfer_buffer_length = count; @@ -2130,8 +2083,6 @@ static int edge_write_room(struct tty_struct *tty) int room = 0; unsigned long flags; - dbg("%s - port %d", __func__, port->number); - if (edge_port == NULL) return 0; if (edge_port->close_pending == 1) @@ -2141,7 +2092,7 @@ static int edge_write_room(struct tty_struct *tty) room = kfifo_avail(&edge_port->write_fifo); spin_unlock_irqrestore(&edge_port->ep_lock, flags); - dbg("%s - returns %d", __func__, room); + dev_dbg(&port->dev, "%s - returns %d\n", __func__, room); return room; } @@ -2152,8 +2103,6 @@ static int edge_chars_in_buffer(struct tty_struct *tty) int chars = 0; unsigned long flags; - dbg("%s - port %d", __func__, port->number); - if (edge_port == NULL) return 0; if (edge_port->close_pending == 1) @@ -2163,7 +2112,7 @@ static int edge_chars_in_buffer(struct tty_struct *tty) chars = kfifo_len(&edge_port->write_fifo); spin_unlock_irqrestore(&edge_port->ep_lock, flags); - dbg("%s - returns %d", __func__, chars); + dev_dbg(&port->dev, "%s - returns %d\n", __func__, chars); return chars; } @@ -2173,8 +2122,6 @@ static void edge_throttle(struct tty_struct *tty) struct edgeport_port *edge_port = usb_get_serial_port_data(port); int status; - dbg("%s - port %d", __func__, port->number); - if (edge_port == NULL) return; @@ -2200,8 +2147,6 @@ static void edge_unthrottle(struct tty_struct *tty) struct edgeport_port *edge_port = usb_get_serial_port_data(port); int status; - dbg("%s - port %d", __func__, port->number); - if (edge_port == NULL) return; @@ -2261,6 +2206,7 @@ static int restart_read(struct edgeport_port *edge_port) static void change_port_settings(struct tty_struct *tty, struct edgeport_port *edge_port, struct ktermios *old_termios) { + struct device *dev = &edge_port->port->dev; struct ump_uart_config *config; int baud; unsigned cflag; @@ -2268,13 +2214,12 @@ static void change_port_settings(struct tty_struct *tty, int port_number = edge_port->port->number - edge_port->port->serial->minor; - dbg("%s - port %d", __func__, edge_port->port->number); + dev_dbg(dev, "%s - port %d\n", __func__, edge_port->port->number); config = kmalloc (sizeof (*config), GFP_KERNEL); if (!config) { tty->termios = *old_termios; - dev_err(&edge_port->port->dev, "%s - out of memory\n", - __func__); + dev_err(dev, "%s - out of memory\n", __func__); return; } @@ -2290,20 +2235,20 @@ static void change_port_settings(struct tty_struct *tty, switch (cflag & CSIZE) { case CS5: config->bDataBits = UMP_UART_CHAR5BITS; - dbg("%s - data bits = 5", __func__); + dev_dbg(dev, "%s - data bits = 5\n", __func__); break; case CS6: config->bDataBits = UMP_UART_CHAR6BITS; - dbg("%s - data bits = 6", __func__); + dev_dbg(dev, "%s - data bits = 6\n", __func__); break; case CS7: config->bDataBits = UMP_UART_CHAR7BITS; - dbg("%s - data bits = 7", __func__); + dev_dbg(dev, "%s - data bits = 7\n", __func__); break; default: case CS8: config->bDataBits = UMP_UART_CHAR8BITS; - dbg("%s - data bits = 8", __func__); + dev_dbg(dev, "%s - data bits = 8\n", __func__); break; } @@ -2311,32 +2256,32 @@ static void change_port_settings(struct tty_struct *tty, if (cflag & PARODD) { config->wFlags |= UMP_MASK_UART_FLAGS_PARITY; config->bParity = UMP_UART_ODDPARITY; - dbg("%s - parity = odd", __func__); + dev_dbg(dev, "%s - parity = odd\n", __func__); } else { config->wFlags |= UMP_MASK_UART_FLAGS_PARITY; config->bParity = UMP_UART_EVENPARITY; - dbg("%s - parity = even", __func__); + dev_dbg(dev, "%s - parity = even\n", __func__); } } else { config->bParity = UMP_UART_NOPARITY; - dbg("%s - parity = none", __func__); + dev_dbg(dev, "%s - parity = none\n", __func__); } if (cflag & CSTOPB) { config->bStopBits = UMP_UART_STOPBIT2; - dbg("%s - stop bits = 2", __func__); + dev_dbg(dev, "%s - stop bits = 2\n", __func__); } else { config->bStopBits = UMP_UART_STOPBIT1; - dbg("%s - stop bits = 1", __func__); + dev_dbg(dev, "%s - stop bits = 1\n", __func__); } /* figure out the flow control settings */ if (cflag & CRTSCTS) { config->wFlags |= UMP_MASK_UART_FLAGS_OUT_X_CTS_FLOW; config->wFlags |= UMP_MASK_UART_FLAGS_RTS_FLOW; - dbg("%s - RTS/CTS is enabled", __func__); + dev_dbg(dev, "%s - RTS/CTS is enabled\n", __func__); } else { - dbg("%s - RTS/CTS is disabled", __func__); + dev_dbg(dev, "%s - RTS/CTS is disabled\n", __func__); tty->hw_stopped = 0; restart_read(edge_port); } @@ -2349,18 +2294,18 @@ static void change_port_settings(struct tty_struct *tty, /* if we are implementing INBOUND XON/XOFF */ if (I_IXOFF(tty)) { config->wFlags |= UMP_MASK_UART_FLAGS_IN_X; - dbg("%s - INBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x", - __func__, config->cXon, config->cXoff); + dev_dbg(dev, "%s - INBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x\n", + __func__, config->cXon, config->cXoff); } else - dbg("%s - INBOUND XON/XOFF is disabled", __func__); + dev_dbg(dev, "%s - INBOUND XON/XOFF is disabled\n", __func__); /* if we are implementing OUTBOUND XON/XOFF */ if (I_IXON(tty)) { config->wFlags |= UMP_MASK_UART_FLAGS_OUT_X; - dbg("%s - OUTBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x", - __func__, config->cXon, config->cXoff); + dev_dbg(dev, "%s - OUTBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x\n", + __func__, config->cXon, config->cXoff); } else - dbg("%s - OUTBOUND XON/XOFF is disabled", __func__); + dev_dbg(dev, "%s - OUTBOUND XON/XOFF is disabled\n", __func__); tty->termios.c_cflag &= ~CMSPAR; @@ -2377,17 +2322,16 @@ static void change_port_settings(struct tty_struct *tty, /* FIXME: Recompute actual baud from divisor here */ - dbg("%s - baud rate = %d, wBaudRate = %d", __func__, baud, - config->wBaudRate); + dev_dbg(dev, "%s - baud rate = %d, wBaudRate = %d\n", __func__, baud, config->wBaudRate); - dbg("wBaudRate: %d", (int)(461550L / config->wBaudRate)); - dbg("wFlags: 0x%x", config->wFlags); - dbg("bDataBits: %d", config->bDataBits); - dbg("bParity: %d", config->bParity); - dbg("bStopBits: %d", config->bStopBits); - dbg("cXon: %d", config->cXon); - dbg("cXoff: %d", config->cXoff); - dbg("bUartMode: %d", config->bUartMode); + dev_dbg(dev, "wBaudRate: %d\n", (int)(461550L / config->wBaudRate)); + dev_dbg(dev, "wFlags: 0x%x\n", config->wFlags); + dev_dbg(dev, "bDataBits: %d\n", config->bDataBits); + dev_dbg(dev, "bParity: %d\n", config->bParity); + dev_dbg(dev, "bStopBits: %d\n", config->bStopBits); + dev_dbg(dev, "cXon: %d\n", config->cXon); + dev_dbg(dev, "cXoff: %d\n", config->cXoff); + dev_dbg(dev, "bUartMode: %d\n", config->bUartMode); /* move the word values into big endian mode */ cpu_to_be16s(&config->wFlags); @@ -2397,8 +2341,8 @@ static void change_port_settings(struct tty_struct *tty, (__u8)(UMPM_UART1_PORT + port_number), 0, (__u8 *)config, sizeof(*config)); if (status) - dbg("%s - error %d when trying to write config to device", - __func__, status); + dev_dbg(dev, "%s - error %d when trying to write config to device\n", + __func__, status); kfree(config); } @@ -2410,11 +2354,11 @@ static void edge_set_termios(struct tty_struct *tty, cflag = tty->termios.c_cflag; - dbg("%s - clfag %08x iflag %08x", __func__, - tty->termios.c_cflag, tty->termios.c_iflag); - dbg("%s - old clfag %08x old iflag %08x", __func__, - old_termios->c_cflag, old_termios->c_iflag); - dbg("%s - port %d", __func__, port->number); + dev_dbg(&port->dev, "%s - clfag %08x iflag %08x\n", __func__, + tty->termios.c_cflag, tty->termios.c_iflag); + dev_dbg(&port->dev, "%s - old clfag %08x old iflag %08x\n", __func__, + old_termios->c_cflag, old_termios->c_iflag); + dev_dbg(&port->dev, "%s - port %d\n", __func__, port->number); if (edge_port == NULL) return; @@ -2430,8 +2374,6 @@ static int edge_tiocmset(struct tty_struct *tty, unsigned int mcr; unsigned long flags; - dbg("%s - port %d", __func__, port->number); - spin_lock_irqsave(&edge_port->ep_lock, flags); mcr = edge_port->shadow_mcr; if (set & TIOCM_RTS) @@ -2464,8 +2406,6 @@ static int edge_tiocmget(struct tty_struct *tty) unsigned int mcr; unsigned long flags; - dbg("%s - port %d", __func__, port->number); - spin_lock_irqsave(&edge_port->ep_lock, flags); msr = edge_port->shadow_msr; @@ -2478,7 +2418,7 @@ static int edge_tiocmget(struct tty_struct *tty) | ((msr & EDGEPORT_MSR_DSR) ? TIOCM_DSR: 0); /* 0x100 */ - dbg("%s -- %x", __func__, result); + dev_dbg(&port->dev, "%s -- %x\n", __func__, result); spin_unlock_irqrestore(&edge_port->ep_lock, flags); return result; @@ -2538,15 +2478,15 @@ static int edge_ioctl(struct tty_struct *tty, struct async_icount cnow; struct async_icount cprev; - dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd); + dev_dbg(&port->dev, "%s - port %d, cmd = 0x%x\n", __func__, port->number, cmd); switch (cmd) { case TIOCGSERIAL: - dbg("%s - (%d) TIOCGSERIAL", __func__, port->number); + dev_dbg(&port->dev, "%s - TIOCGSERIAL\n", __func__); return get_serial_info(edge_port, (struct serial_struct __user *) arg); case TIOCMIWAIT: - dbg("%s - (%d) TIOCMIWAIT", __func__, port->number); + dev_dbg(&port->dev, "%s - TIOCMIWAIT\n", __func__); cprev = edge_port->icount; while (1) { interruptible_sleep_on(&edge_port->delta_msr_wait); @@ -2578,8 +2518,6 @@ static void edge_break(struct tty_struct *tty, int break_state) int status; int bv = 0; /* Off */ - dbg("%s - state = %d", __func__, break_state); - /* chase the port close */ chase_port(edge_port, 0, 0); @@ -2587,8 +2525,8 @@ static void edge_break(struct tty_struct *tty, int break_state) bv = 1; /* On */ status = ti_do_config(edge_port, UMPC_SET_CLR_BREAK, bv); if (status) - dbg("%s - error %d sending break set/clear command.", - __func__, status); + dev_dbg(&port->dev, "%s - error %d sending break set/clear command.\n", + __func__, status); } static int edge_startup(struct usb_serial *serial) @@ -2655,7 +2593,6 @@ cleanup: static void edge_disconnect(struct usb_serial *serial) { - dbg("%s", __func__); } static void edge_release(struct usb_serial *serial) @@ -2663,8 +2600,6 @@ static void edge_release(struct usb_serial *serial) int i; struct edgeport_port *edge_port; - dbg("%s", __func__); - for (i = 0; i < serial->num_ports; ++i) { edge_port = usb_get_serial_port_data(serial->port[i]); kfifo_free(&edge_port->write_fifo); @@ -2692,7 +2627,7 @@ static ssize_t store_uart_mode(struct device *dev, struct edgeport_port *edge_port = usb_get_serial_port_data(port); unsigned int v = simple_strtoul(valbuf, NULL, 0); - dbg("%s: setting uart_mode = %d", __func__, v); + dev_dbg(dev, "%s: setting uart_mode = %d\n", __func__, v); if (v < 256) edge_port->bUartMode = v; @@ -2789,9 +2724,6 @@ MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); MODULE_FIRMWARE("edgeport/down3.bin"); -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); - module_param(closing_wait, int, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(closing_wait, "Maximum wait for data to drain, in .01 secs"); diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c index c85a7eb87d4e..1068bf22e27e 100644 --- a/drivers/usb/serial/ipaq.c +++ b/drivers/usb/serial/ipaq.c @@ -33,7 +33,6 @@ #define DRIVER_AUTHOR "Ganesh Varadarajan <ganesh@veritas.com>" #define DRIVER_DESC "USB PocketPC PDA driver" -static bool debug; static int connect_retries = KP_RETRIES; static int initial_wait; @@ -616,9 +615,6 @@ MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); - module_param(connect_retries, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(connect_retries, "Maximum number of connect retries (one second each)"); diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c index 2cb30c535839..20a132ec39e2 100644 --- a/drivers/usb/serial/ipw.c +++ b/drivers/usb/serial/ipw.c @@ -138,11 +138,10 @@ static const struct usb_device_id id_table[] = { }; MODULE_DEVICE_TABLE(usb, id_table); -static bool debug; - static int ipw_open(struct tty_struct *tty, struct usb_serial_port *port) { - struct usb_device *dev = port->serial->dev; + struct usb_device *udev = port->serial->dev; + struct device *dev = &port->dev; u8 buf_flow_static[16] = IPW_BYTES_FLOWINIT; u8 *buf_flow_init; int result; @@ -154,8 +153,8 @@ static int ipw_open(struct tty_struct *tty, struct usb_serial_port *port) /* --1: Tell the modem to initialize (we think) From sniffs this is * always the first thing that gets sent to the modem during * opening of the device */ - dbg("%s: Sending SIO_INIT (we guess)", __func__); - result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + dev_dbg(dev, "%s: Sending SIO_INIT (we guess)\n", __func__); + result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), IPW_SIO_INIT, USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, 0, @@ -164,22 +163,19 @@ static int ipw_open(struct tty_struct *tty, struct usb_serial_port *port) 0, 100000); if (result < 0) - dev_err(&port->dev, - "Init of modem failed (error = %d)\n", result); + dev_err(dev, "Init of modem failed (error = %d)\n", result); /* reset the bulk pipes */ - usb_clear_halt(dev, - usb_rcvbulkpipe(dev, port->bulk_in_endpointAddress)); - usb_clear_halt(dev, - usb_sndbulkpipe(dev, port->bulk_out_endpointAddress)); + usb_clear_halt(udev, usb_rcvbulkpipe(udev, port->bulk_in_endpointAddress)); + usb_clear_halt(udev, usb_sndbulkpipe(udev, port->bulk_out_endpointAddress)); /*--2: Start reading from the device */ - dbg("%s: setting up bulk read callback", __func__); + dev_dbg(dev, "%s: setting up bulk read callback\n", __func__); usb_wwan_open(tty, port); /*--3: Tell the modem to open the floodgates on the rx bulk channel */ - dbg("%s:asking modem for RxRead (RXBULK_ON)", __func__); - result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + dev_dbg(dev, "%s:asking modem for RxRead (RXBULK_ON)\n", __func__); + result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), IPW_SIO_RXCTL, USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, IPW_RXBULK_ON, @@ -188,12 +184,11 @@ static int ipw_open(struct tty_struct *tty, struct usb_serial_port *port) 0, 100000); if (result < 0) - dev_err(&port->dev, - "Enabling bulk RxRead failed (error = %d)\n", result); + dev_err(dev, "Enabling bulk RxRead failed (error = %d)\n", result); /*--4: setup the initial flowcontrol */ - dbg("%s:setting init flowcontrol (%s)", __func__, buf_flow_init); - result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + dev_dbg(dev, "%s:setting init flowcontrol (%s)\n", __func__, buf_flow_init); + result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), IPW_SIO_HANDFLOW, USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, 0, @@ -202,8 +197,7 @@ static int ipw_open(struct tty_struct *tty, struct usb_serial_port *port) 0x10, 200000); if (result < 0) - dev_err(&port->dev, - "initial flowcontrol failed (error = %d)\n", result); + dev_err(dev, "initial flowcontrol failed (error = %d)\n", result); kfree(buf_flow_init); return 0; @@ -233,12 +227,13 @@ static void ipw_release(struct usb_serial *serial) static void ipw_dtr_rts(struct usb_serial_port *port, int on) { - struct usb_device *dev = port->serial->dev; + struct usb_device *udev = port->serial->dev; + struct device *dev = &port->dev; int result; - dbg("%s: on = %d", __func__, on); + dev_dbg(dev, "%s: on = %d\n", __func__, on); - result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), IPW_SIO_SET_PIN, USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, on ? IPW_PIN_SETDTR : IPW_PIN_CLRDTR, @@ -247,10 +242,9 @@ static void ipw_dtr_rts(struct usb_serial_port *port, int on) 0, 200000); if (result < 0) - dev_err(&port->dev, "setting dtr failed (error = %d)\n", - result); + dev_err(dev, "setting dtr failed (error = %d)\n", result); - result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), IPW_SIO_SET_PIN, USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, on ? IPW_PIN_SETRTS : IPW_PIN_CLRRTS, @@ -259,18 +253,18 @@ static void ipw_dtr_rts(struct usb_serial_port *port, int on) 0, 200000); if (result < 0) - dev_err(&port->dev, "setting rts failed (error = %d)\n", - result); + dev_err(dev, "setting rts failed (error = %d)\n", result); } static void ipw_close(struct usb_serial_port *port) { - struct usb_device *dev = port->serial->dev; + struct usb_device *udev = port->serial->dev; + struct device *dev = &port->dev; int result; /*--3: purge */ - dbg("%s:sending purge", __func__); - result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + dev_dbg(dev, "%s:sending purge\n", __func__); + result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), IPW_SIO_PURGE, USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, 0x03, @@ -279,12 +273,12 @@ static void ipw_close(struct usb_serial_port *port) 0, 200000); if (result < 0) - dev_err(&port->dev, "purge failed (error = %d)\n", result); + dev_err(dev, "purge failed (error = %d)\n", result); /* send RXBULK_off (tell modem to stop transmitting bulk data on rx chan) */ - result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), IPW_SIO_RXCTL, USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, IPW_RXBULK_OFF, @@ -294,8 +288,7 @@ static void ipw_close(struct usb_serial_port *port) 100000); if (result < 0) - dev_err(&port->dev, - "Disabling bulk RxRead failed (error = %d)\n", result); + dev_err(dev, "Disabling bulk RxRead failed (error = %d)\n", result); usb_wwan_close(port); } @@ -328,6 +321,3 @@ module_usb_serial_driver(serial_drivers, id_table); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c index 5a96692b12a2..e24e2d4f4c1b 100644 --- a/drivers/usb/serial/ir-usb.c +++ b/drivers/usb/serial/ir-usb.c @@ -38,15 +38,9 @@ #include <linux/usb/serial.h> #include <linux/usb/irda.h> -/* - * Version Information - */ -#define DRIVER_VERSION "v0.5" #define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Johan Hovold <jhovold@gmail.com>" #define DRIVER_DESC "USB IR Dongle driver" -static bool debug; - /* if overridden by the user, then use their value for the size of the read and * write urbs */ static int buffer_size; @@ -430,18 +424,12 @@ err_buf: static int __init ir_init(void) { - int retval; - if (buffer_size) { ir_device.bulk_in_size = buffer_size; ir_device.bulk_out_size = buffer_size; } - retval = usb_serial_register_drivers(serial_drivers, KBUILD_MODNAME, ir_id_table); - if (retval == 0) - printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":" - DRIVER_DESC "\n"); - return retval; + return usb_serial_register_drivers(serial_drivers, KBUILD_MODNAME, ir_id_table); } static void __exit ir_exit(void) @@ -457,8 +445,6 @@ MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); module_param(xbof, int, 0); MODULE_PARM_DESC(xbof, "Force specific number of XBOFs"); module_param(buffer_size, int, 0); diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c index bf3864045c18..01da3ea36e89 100644 --- a/drivers/usb/serial/iuu_phoenix.c +++ b/drivers/usb/serial/iuu_phoenix.c @@ -32,13 +32,6 @@ #include "iuu_phoenix.h" #include <linux/random.h> - -#ifdef CONFIG_USB_SERIAL_DEBUG -static bool debug = 1; -#else -static bool debug; -#endif - /* * Version Information */ @@ -72,7 +65,6 @@ struct iuu_private { u8 *writebuf; /* buffer for writing to device */ int writelen; /* num of byte to write to device */ u8 *buf; /* used for initialize speed */ - u8 *dbgbuf; /* debug buffer */ u8 len; int vcc; /* vcc (either 3 or 5 V) */ u32 baud; @@ -84,32 +76,31 @@ struct iuu_private { static void iuu_free_buf(struct iuu_private *priv) { kfree(priv->buf); - kfree(priv->dbgbuf); kfree(priv->writebuf); } -static int iuu_alloc_buf(struct iuu_private *priv) +static int iuu_alloc_buf(struct usb_serial *serial, struct iuu_private *priv) { priv->buf = kzalloc(256, GFP_KERNEL); - priv->dbgbuf = kzalloc(256, GFP_KERNEL); priv->writebuf = kzalloc(256, GFP_KERNEL); - if (!priv->buf || !priv->dbgbuf || !priv->writebuf) { + if (!priv->buf || !priv->writebuf) { iuu_free_buf(priv); - dbg("%s problem allocation buffer", __func__); + dev_dbg(&serial->dev->dev, "%s problem allocation buffer\n", __func__); return -ENOMEM; } - dbg("%s - Privates buffers allocation success", __func__); + dev_dbg(&serial->dev->dev, "%s - Privates buffers allocation success\n", __func__); return 0; } static int iuu_startup(struct usb_serial *serial) { struct iuu_private *priv; + priv = kzalloc(sizeof(struct iuu_private), GFP_KERNEL); - dbg("%s- priv allocation success", __func__); + dev_dbg(&serial->dev->dev, "%s- priv allocation success\n", __func__); if (!priv) return -ENOMEM; - if (iuu_alloc_buf(priv)) { + if (iuu_alloc_buf(serial, priv)) { kfree(priv); return -ENOMEM; } @@ -130,13 +121,13 @@ static void iuu_release(struct usb_serial *serial) if (priv) { iuu_free_buf(priv); - dbg("%s - I will free all", __func__); + dev_dbg(&port->dev, "%s - I will free all\n", __func__); usb_set_serial_port_data(port, NULL); - dbg("%s - priv is not anymore in port structure", __func__); + dev_dbg(&port->dev, "%s - priv is not anymore in port structure\n", __func__); kfree(priv); - dbg("%s priv is now kfree", __func__); + dev_dbg(&port->dev, "%s priv is now kfree\n", __func__); } } @@ -148,13 +139,13 @@ static int iuu_tiocmset(struct tty_struct *tty, unsigned long flags; /* FIXME: locking on tiomstatus */ - dbg("%s (%d) msg : SET = 0x%04x, CLEAR = 0x%04x ", __func__, - port->number, set, clear); + dev_dbg(&port->dev, "%s msg : SET = 0x%04x, CLEAR = 0x%04x\n", + __func__, set, clear); spin_lock_irqsave(&priv->lock, flags); if ((set & TIOCM_RTS) && !(priv->tiostatus == TIOCM_RTS)) { - dbg("%s TIOCMSET RESET called !!!", __func__); + dev_dbg(&port->dev, "%s TIOCMSET RESET called !!!\n", __func__); priv->reset = 1; } if (set & TIOCM_RTS) @@ -190,7 +181,7 @@ static void iuu_rxcmd(struct urb *urb) int status = urb->status; if (status) { - dbg("%s - status = %d", __func__, status); + dev_dbg(&port->dev, "%s - status = %d\n", __func__, status); /* error stop all */ return; } @@ -244,13 +235,13 @@ static void iuu_update_status_callback(struct urb *urb) int status = urb->status; if (status) { - dbg("%s - status = %d", __func__, status); + dev_dbg(&port->dev, "%s - status = %d\n", __func__, status); /* error stop all */ return; } st = urb->transfer_buffer; - dbg("%s - enter", __func__); + dev_dbg(&port->dev, "%s - enter\n", __func__); if (urb->actual_length == 1) { switch (st[0]) { case 0x1: @@ -272,7 +263,7 @@ static void iuu_status_callback(struct urb *urb) int result; int status = urb->status; - dbg("%s - status = %d", __func__, status); + dev_dbg(&port->dev, "%s - status = %d\n", __func__, status); usb_fill_bulk_urb(port->read_urb, port->serial->dev, usb_rcvbulkpipe(port->serial->dev, port->bulk_in_endpointAddress), @@ -311,9 +302,9 @@ static int bulk_immediate(struct usb_serial_port *port, u8 *buf, u8 count) count, &actual, HZ * 1); if (status != IUU_OPERATION_OK) - dbg("%s - error = %2x", __func__, status); + dev_dbg(&port->dev, "%s - error = %2x\n", __func__, status); else - dbg("%s - write OK !", __func__); + dev_dbg(&port->dev, "%s - write OK !\n", __func__); return status; } @@ -331,9 +322,9 @@ static int read_immediate(struct usb_serial_port *port, u8 *buf, u8 count) count, &actual, HZ * 1); if (status != IUU_OPERATION_OK) - dbg("%s - error = %2x", __func__, status); + dev_dbg(&port->dev, "%s - error = %2x\n", __func__, status); else - dbg("%s - read OK !", __func__); + dev_dbg(&port->dev, "%s - read OK !\n", __func__); return status; } @@ -357,9 +348,9 @@ static int iuu_led(struct usb_serial_port *port, unsigned int R, status = bulk_immediate(port, buf, 8); kfree(buf); if (status != IUU_OPERATION_OK) - dbg("%s - led error status = %2x", __func__, status); + dev_dbg(&port->dev, "%s - led error status = %2x\n", __func__, status); else - dbg("%s - led OK !", __func__); + dev_dbg(&port->dev, "%s - led OK !\n", __func__); return IUU_OPERATION_OK; } @@ -445,7 +436,7 @@ static int iuu_clk(struct usb_serial_port *port, int dwFrq) status = bulk_immediate(port, (u8 *) priv->buf, Count); if (status != 0) { - dbg("%s - write error ", __func__); + dev_dbg(&port->dev, "%s - write error\n", __func__); return status; } } else if (frq == 3579000) { @@ -554,12 +545,13 @@ static int iuu_clk(struct usb_serial_port *port, int dwFrq) status = bulk_immediate(port, (u8 *) priv->buf, Count); if (status != IUU_OPERATION_OK) - dbg("%s - write error ", __func__); + dev_dbg(&port->dev, "%s - write error\n", __func__); return status; } static int iuu_uart_flush(struct usb_serial_port *port) { + struct device *dev = &port->dev; int i; int status; u8 rxcmd = IUU_UART_RX; @@ -571,27 +563,26 @@ static int iuu_uart_flush(struct usb_serial_port *port) for (i = 0; i < 2; i++) { status = bulk_immediate(port, &rxcmd, 1); if (status != IUU_OPERATION_OK) { - dbg("%s - uart_flush_write error", __func__); + dev_dbg(dev, "%s - uart_flush_write error\n", __func__); return status; } status = read_immediate(port, &priv->len, 1); if (status != IUU_OPERATION_OK) { - dbg("%s - uart_flush_read error", __func__); + dev_dbg(dev, "%s - uart_flush_read error\n", __func__); return status; } if (priv->len > 0) { - dbg("%s - uart_flush datalen is : %i ", __func__, - priv->len); + dev_dbg(dev, "%s - uart_flush datalen is : %i\n", __func__, priv->len); status = read_immediate(port, priv->buf, priv->len); if (status != IUU_OPERATION_OK) { - dbg("%s - uart_flush_read error", __func__); + dev_dbg(dev, "%s - uart_flush_read error\n", __func__); return status; } } } - dbg("%s - uart_flush_read OK!", __func__); + dev_dbg(dev, "%s - uart_flush_read OK!\n", __func__); iuu_led(port, 0, 0xF000, 0, 0xFF); return status; } @@ -610,10 +601,10 @@ static void read_buf_callback(struct urb *urb) return; } - dbg("%s - %i chars to write", __func__, urb->actual_length); + dev_dbg(&port->dev, "%s - %i chars to write\n", __func__, urb->actual_length); tty = tty_port_tty_get(&port->port); if (data == NULL) - dbg("%s - data is NULL !!!", __func__); + dev_dbg(&port->dev, "%s - data is NULL !!!\n", __func__); if (tty && urb->actual_length && data) { tty_insert_flip_string(tty, data, urb->actual_length); tty_flip_buffer_push(tty); @@ -627,7 +618,6 @@ static int iuu_bulk_write(struct usb_serial_port *port) struct iuu_private *priv = usb_get_serial_port_data(port); unsigned long flags; int result; - int i; int buf_len; char *buf_ptr = port->write_urb->transfer_buffer; @@ -640,14 +630,8 @@ static int iuu_bulk_write(struct usb_serial_port *port) buf_len = priv->writelen; priv->writelen = 0; spin_unlock_irqrestore(&priv->lock, flags); - if (debug == 1) { - for (i = 0; i < buf_len; i++) - sprintf(priv->dbgbuf + i*2 , - "%02X", priv->writebuf[i]); - priv->dbgbuf[buf_len+i*2] = 0; - dbg("%s - writing %i chars : %s", __func__, - buf_len, priv->dbgbuf); - } + dev_dbg(&port->dev, "%s - writing %i chars : %*ph\n", __func__, + buf_len, buf_len, buf_ptr); usb_fill_bulk_urb(port->write_urb, port->serial->dev, usb_sndbulkpipe(port->serial->dev, port->bulk_out_endpointAddress), @@ -683,18 +667,18 @@ static void iuu_uart_read_callback(struct urb *urb) priv->poll++; if (status) { - dbg("%s - status = %d", __func__, status); + dev_dbg(&port->dev, "%s - status = %d\n", __func__, status); /* error stop all */ return; } if (data == NULL) - dbg("%s - data is NULL !!!", __func__); + dev_dbg(&port->dev, "%s - data is NULL !!!\n", __func__); if (urb->actual_length == 1 && data != NULL) len = (int) data[0]; if (urb->actual_length > 1) { - dbg("%s - urb->actual_length = %i", __func__, + dev_dbg(&port->dev, "%s - urb->actual_length = %i\n", __func__, urb->actual_length); error = 1; return; @@ -702,7 +686,7 @@ static void iuu_uart_read_callback(struct urb *urb) /* if len > 0 call readbuf */ if (len > 0 && error == 0) { - dbg("%s - call read buf - len to read is %i ", + dev_dbg(&port->dev, "%s - call read buf - len to read is %i\n", __func__, len); status = iuu_read_buf(port, len); return; @@ -729,7 +713,7 @@ static void iuu_uart_read_callback(struct urb *urb) } spin_unlock_irqrestore(&priv->lock, flags); /* if nothing to write call again rxcmd */ - dbg("%s - rxcmd recall", __func__); + dev_dbg(&port->dev, "%s - rxcmd recall\n", __func__); iuu_led_activity_off(urb); } @@ -769,7 +753,7 @@ static void read_rxcmd_callback(struct urb *urb) port->read_urb->transfer_buffer, 256, iuu_uart_read_callback, port); result = usb_submit_urb(port->read_urb, GFP_ATOMIC); - dbg("%s - submit result = %d", __func__, result); + dev_dbg(&port->dev, "%s - submit result = %d\n", __func__, result); } static int iuu_uart_on(struct usb_serial_port *port) @@ -789,13 +773,13 @@ static int iuu_uart_on(struct usb_serial_port *port) status = bulk_immediate(port, buf, 4); if (status != IUU_OPERATION_OK) { - dbg("%s - uart_on error", __func__); + dev_dbg(&port->dev, "%s - uart_on error\n", __func__); goto uart_enable_failed; } /* iuu_reset() the card after iuu_uart_on() */ status = iuu_uart_flush(port); if (status != IUU_OPERATION_OK) - dbg("%s - uart_flush error", __func__); + dev_dbg(&port->dev, "%s - uart_flush error\n", __func__); uart_enable_failed: kfree(buf); return status; @@ -813,7 +797,7 @@ static int iuu_uart_off(struct usb_serial_port *port) status = bulk_immediate(port, buf, 1); if (status != IUU_OPERATION_OK) - dbg("%s - uart_off error", __func__); + dev_dbg(&port->dev, "%s - uart_off error\n", __func__); kfree(buf); return status; @@ -830,7 +814,7 @@ static int iuu_uart_baud(struct usb_serial_port *port, u32 baud_base, u8 T1reload = 0; unsigned int T1FrekvensHZ = 0; - dbg("%s - enter baud_base=%d", __func__, baud_base); + dev_dbg(&port->dev, "%s - enter baud_base=%d\n", __func__, baud_base); dataout = kmalloc(sizeof(u8) * 5, GFP_KERNEL); if (!dataout) @@ -911,7 +895,7 @@ static int iuu_uart_baud(struct usb_serial_port *port, u32 baud_base, status = bulk_immediate(port, dataout, DataCount); if (status != IUU_OPERATION_OK) - dbg("%s - uart_off error", __func__); + dev_dbg(&port->dev, "%s - uart_off error\n", __func__); kfree(dataout); return status; } @@ -932,7 +916,7 @@ static void iuu_set_termios(struct tty_struct *tty, /* Just use the ospeed. ispeed should be the same. */ baud = tty->termios.c_ospeed; - dbg("%s - enter c_ospeed or baud=%d", __func__, baud); + dev_dbg(&port->dev, "%s - enter c_ospeed or baud=%d\n", __func__, baud); /* compute the parity parameter */ parity = 0; @@ -983,7 +967,7 @@ static void iuu_close(struct usb_serial_port *port) if (serial->dev) { /* free writebuf */ /* shutdown our urbs */ - dbg("%s - shutting down urbs", __func__); + dev_dbg(&port->dev, "%s - shutting down urbs\n", __func__); usb_kill_urb(port->write_urb); usb_kill_urb(port->read_urb); usb_kill_urb(port->interrupt_in_urb); @@ -1006,6 +990,7 @@ static void iuu_init_termios(struct tty_struct *tty) static int iuu_open(struct tty_struct *tty, struct usb_serial_port *port) { struct usb_serial *serial = port->serial; + struct device *dev = &port->dev; u8 *buf; int result; int baud; @@ -1017,7 +1002,7 @@ static int iuu_open(struct tty_struct *tty, struct usb_serial_port *port) /* Re-encode speed */ tty_encode_baud_rate(tty, baud, baud); - dbg("%s - port %d, baud %d", __func__, port->number, baud); + dev_dbg(dev, "%s - baud %d\n", __func__, baud); usb_clear_halt(serial->dev, port->write_urb->pipe); usb_clear_halt(serial->dev, port->read_urb->pipe); @@ -1032,14 +1017,14 @@ static int iuu_open(struct tty_struct *tty, struct usb_serial_port *port) result = usb_control_msg(port->serial->dev, \ usb_rcvctrlpipe(port->serial->dev, 0), \ b, a, c, d, buf, 1, 1000); \ - dbg("0x%x:0x%x:0x%x:0x%x %d - %x", a, b, c, d, result, \ + dev_dbg(dev, "0x%x:0x%x:0x%x:0x%x %d - %x\n", a, b, c, d, result, \ buf[0]); } while (0); #define SOUP(a, b, c, d) do { \ result = usb_control_msg(port->serial->dev, \ usb_sndctrlpipe(port->serial->dev, 0), \ b, a, c, d, NULL, 0, 1000); \ - dbg("0x%x:0x%x:0x%x:0x%x %d", a, b, c, d, result); } while (0) + dev_dbg(dev, "0x%x:0x%x:0x%x:0x%x %d\n", a, b, c, d, result); } while (0) /* This is not UART related but IUU USB driver related or something */ /* like that. Basically no IUU will accept any commands from the USB */ @@ -1119,7 +1104,7 @@ static int iuu_open(struct tty_struct *tty, struct usb_serial_port *port) iuu_uart_flush(port); - dbg("%s - initialization done", __func__); + dev_dbg(dev, "%s - initialization done\n", __func__); memset(port->write_urb->transfer_buffer, IUU_UART_RX, 1); usb_fill_bulk_urb(port->write_urb, port->serial->dev, @@ -1129,11 +1114,10 @@ static int iuu_open(struct tty_struct *tty, struct usb_serial_port *port) read_rxcmd_callback, port); result = usb_submit_urb(port->write_urb, GFP_KERNEL); if (result) { - dev_err(&port->dev, "%s - failed submitting read urb," - " error %d\n", __func__, result); + dev_err(dev, "%s - failed submitting read urb, error %d\n", __func__, result); iuu_close(port); } else { - dbg("%s - rxcmd OK", __func__); + dev_dbg(dev, "%s - rxcmd OK\n", __func__); } return result; @@ -1159,9 +1143,9 @@ static int iuu_vcc_set(struct usb_serial_port *port, unsigned int vcc) kfree(buf); if (status != IUU_OPERATION_OK) - dbg("%s - vcc error status = %2x", __func__, status); + dev_dbg(&port->dev, "%s - vcc error status = %2x\n", __func__, status); else - dbg("%s - vcc OK !", __func__); + dev_dbg(&port->dev, "%s - vcc OK !\n", __func__); return status; } @@ -1192,7 +1176,7 @@ static ssize_t store_vcc_mode(struct device *dev, goto fail_store_vcc_mode; } - dbg("%s: setting vcc_mode = %ld", __func__, v); + dev_dbg(dev, "%s: setting vcc_mode = %ld", __func__, v); if ((v != 3) && (v != 5)) { dev_err(dev, "%s - vcc_mode %ld is invalid\n", __func__, v); @@ -1257,8 +1241,6 @@ MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); MODULE_VERSION(DRIVER_VERSION); -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); module_param(xmas, bool, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(xmas, "Xmas colors enabled or not"); diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index 7bcbb47e1449..29c943d737d0 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -38,15 +38,12 @@ #include <linux/tty_flip.h> #include <linux/module.h> #include <linux/spinlock.h> -#include <linux/firmware.h> -#include <linux/ihex.h> #include <linux/uaccess.h> #include <linux/usb.h> #include <linux/usb/serial.h> +#include <linux/usb/ezusb.h> #include "keyspan.h" -static bool debug; - /* * Version Information */ @@ -165,7 +162,7 @@ static void keyspan_set_termios(struct tty_struct *tty, so other rates can be generated if desired. */ baud_rate = tty_get_baud_rate(tty); /* If no match or invalid, don't change */ - if (d_details->calculate_baud_rate(baud_rate, d_details->baudclk, + if (d_details->calculate_baud_rate(port, baud_rate, d_details->baudclk, NULL, NULL, NULL, device_port) == KEYSPAN_BAUD_RATE_OK) { /* FIXME - more to do here to ensure rate changes cleanly */ /* FIXME - calcuate exact rate from divisor ? */ @@ -241,8 +238,8 @@ static int keyspan_write(struct tty_struct *tty, dataOffset = 1; } - dbg("%s - for port %d (%d chars), flip=%d", - __func__, port->number, count, p_priv->out_flip); + dev_dbg(&port->dev, "%s - for port %d (%d chars), flip=%d\n", + __func__, port->number, count, p_priv->out_flip); for (left = count; left > 0; left -= todo) { todo = left; @@ -255,11 +252,11 @@ static int keyspan_write(struct tty_struct *tty, this_urb = p_priv->out_urbs[flip]; if (this_urb == NULL) { /* no bulk out, so return 0 bytes written */ - dbg("%s - no output urb :(", __func__); + dev_dbg(&port->dev, "%s - no output urb :(\n", __func__); return count; } - dbg("%s - endpoint %d flip %d", + dev_dbg(&port->dev, "%s - endpoint %d flip %d\n", __func__, usb_pipeendpoint(this_urb->pipe), flip); if (this_urb->status == -EINPROGRESS) { @@ -282,7 +279,7 @@ static int keyspan_write(struct tty_struct *tty, err = usb_submit_urb(this_urb, GFP_ATOMIC); if (err != 0) - dbg("usb_submit_urb(write bulk) failed (%d)", err); + dev_dbg(&port->dev, "usb_submit_urb(write bulk) failed (%d)\n", err); p_priv->tx_start_time[flip] = jiffies; /* Flip for next time if usa26 or usa28 interface @@ -305,8 +302,8 @@ static void usa26_indat_callback(struct urb *urb) endpoint = usb_pipeendpoint(urb->pipe); if (status) { - dbg("%s - nonzero status: %x on endpoint %d.", - __func__, status, endpoint); + dev_dbg(&urb->dev->dev,"%s - nonzero status: %x on endpoint %d.\n", + __func__, status, endpoint); return; } @@ -325,7 +322,7 @@ static void usa26_indat_callback(struct urb *urb) tty_insert_flip_char(tty, data[i], err); } else { /* some bytes had errors, every byte has status */ - dbg("%s - RX error!!!!", __func__); + dev_dbg(&port->dev, "%s - RX error!!!!\n", __func__); for (i = 0; i + 1 < urb->actual_length; i += 2) { int stat = data[i], flag = 0; if (stat & RXERROR_OVERRUN) @@ -345,7 +342,7 @@ static void usa26_indat_callback(struct urb *urb) /* Resubmit urb so we continue receiving */ err = usb_submit_urb(urb, GFP_ATOMIC); if (err != 0) - dbg("%s - resubmit read urb failed. (%d)", __func__, err); + dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err); } /* Outdat handling is common for all devices */ @@ -356,7 +353,7 @@ static void usa2x_outdat_callback(struct urb *urb) port = urb->context; p_priv = usb_get_serial_port_data(port); - dbg("%s - urb %d", __func__, urb == p_priv->out_urbs[1]); + dev_dbg(&port->dev, "%s - urb %d\n", __func__, urb == p_priv->out_urbs[1]); usb_serial_port_softint(port); } @@ -374,7 +371,7 @@ static void usa26_outcont_callback(struct urb *urb) p_priv = usb_get_serial_port_data(port); if (p_priv->resend_cont) { - dbg("%s - sending setup", __func__); + dev_dbg(&port->dev, "%s - sending setup\n", __func__); keyspan_usa26_send_setup(port->serial, port, p_priv->resend_cont - 1); } @@ -394,20 +391,22 @@ static void usa26_instat_callback(struct urb *urb) serial = urb->context; if (status) { - dbg("%s - nonzero status: %x", __func__, status); + dev_dbg(&urb->dev->dev, "%s - nonzero status: %x\n", __func__, status); return; } if (urb->actual_length != 9) { - dbg("%s - %d byte report??", __func__, urb->actual_length); + dev_dbg(&urb->dev->dev, "%s - %d byte report??\n", __func__, urb->actual_length); goto exit; } msg = (struct keyspan_usa26_portStatusMessage *)data; #if 0 - dbg("%s - port status: port %d cts %d dcd %d dsr %d ri %d toff %d txoff %d rxen %d cr %d", - __func__, msg->port, msg->hskia_cts, msg->gpia_dcd, msg->dsr, msg->ri, msg->_txOff, - msg->_txXoff, msg->rxEnabled, msg->controlResponse); + dev_dbg(&urb->dev->dev, + "%s - port status: port %d cts %d dcd %d dsr %d ri %d toff %d txoff %d rxen %d cr %d", + __func__, msg->port, msg->hskia_cts, msg->gpia_dcd, msg->dsr, + msg->ri, msg->_txOff, msg->_txXoff, msg->rxEnabled, + msg->controlResponse); #endif /* Now do something useful with the data */ @@ -415,7 +414,7 @@ static void usa26_instat_callback(struct urb *urb) /* Check port number from message and retrieve private data */ if (msg->port >= serial->num_ports) { - dbg("%s - Unexpected port number %d", __func__, msg->port); + dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n", __func__, msg->port); goto exit; } port = serial->port[msg->port]; @@ -438,7 +437,7 @@ static void usa26_instat_callback(struct urb *urb) /* Resubmit urb so we continue receiving */ err = usb_submit_urb(urb, GFP_ATOMIC); if (err != 0) - dbg("%s - resubmit read urb failed. (%d)", __func__, err); + dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err); exit: ; } @@ -465,8 +464,8 @@ static void usa28_indat_callback(struct urb *urb) do { if (status) { - dbg("%s - nonzero status: %x on endpoint %d.", - __func__, status, usb_pipeendpoint(urb->pipe)); + dev_dbg(&urb->dev->dev, "%s - nonzero status: %x on endpoint %d.\n", + __func__, status, usb_pipeendpoint(urb->pipe)); return; } @@ -484,7 +483,7 @@ static void usa28_indat_callback(struct urb *urb) /* Resubmit urb so we continue receiving */ err = usb_submit_urb(urb, GFP_ATOMIC); if (err != 0) - dbg("%s - resubmit read urb failed. (%d)", + dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err); p_priv->in_flip ^= 1; @@ -505,7 +504,7 @@ static void usa28_outcont_callback(struct urb *urb) p_priv = usb_get_serial_port_data(port); if (p_priv->resend_cont) { - dbg("%s - sending setup", __func__); + dev_dbg(&port->dev, "%s - sending setup\n", __func__); keyspan_usa28_send_setup(port->serial, port, p_priv->resend_cont - 1); } @@ -526,25 +525,28 @@ static void usa28_instat_callback(struct urb *urb) serial = urb->context; if (status) { - dbg("%s - nonzero status: %x", __func__, status); + dev_dbg(&urb->dev->dev, "%s - nonzero status: %x\n", __func__, status); return; } if (urb->actual_length != sizeof(struct keyspan_usa28_portStatusMessage)) { - dbg("%s - bad length %d", __func__, urb->actual_length); + dev_dbg(&urb->dev->dev, "%s - bad length %d\n", __func__, urb->actual_length); goto exit; } - /*dbg("%s %x %x %x %x %x %x %x %x %x %x %x %x", __func__ - data[0], data[1], data[2], data[3], data[4], data[5], - data[6], data[7], data[8], data[9], data[10], data[11]);*/ + /* + dev_dbg(&urb->dev->dev, + "%s %x %x %x %x %x %x %x %x %x %x %x %x", __func__, + data[0], data[1], data[2], data[3], data[4], data[5], + data[6], data[7], data[8], data[9], data[10], data[11]); + */ /* Now do something useful with the data */ msg = (struct keyspan_usa28_portStatusMessage *)data; /* Check port number from message and retrieve private data */ if (msg->port >= serial->num_ports) { - dbg("%s - Unexpected port number %d", __func__, msg->port); + dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n", __func__, msg->port); goto exit; } port = serial->port[msg->port]; @@ -567,7 +569,7 @@ static void usa28_instat_callback(struct urb *urb) /* Resubmit urb so we continue receiving */ err = usb_submit_urb(urb, GFP_ATOMIC); if (err != 0) - dbg("%s - resubmit read urb failed. (%d)", __func__, err); + dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err); exit: ; } @@ -589,7 +591,7 @@ static void usa49_glocont_callback(struct urb *urb) p_priv = usb_get_serial_port_data(port); if (p_priv->resend_cont) { - dbg("%s - sending setup", __func__); + dev_dbg(&port->dev, "%s - sending setup\n", __func__); keyspan_usa49_send_setup(serial, port, p_priv->resend_cont - 1); break; @@ -613,27 +615,29 @@ static void usa49_instat_callback(struct urb *urb) serial = urb->context; if (status) { - dbg("%s - nonzero status: %x", __func__, status); + dev_dbg(&urb->dev->dev, "%s - nonzero status: %x\n", __func__, status); return; } if (urb->actual_length != sizeof(struct keyspan_usa49_portStatusMessage)) { - dbg("%s - bad length %d", __func__, urb->actual_length); + dev_dbg(&urb->dev->dev, "%s - bad length %d\n", __func__, urb->actual_length); goto exit; } - /*dbg(" %x %x %x %x %x %x %x %x %x %x %x", __func__, - data[0], data[1], data[2], data[3], data[4], data[5], - data[6], data[7], data[8], data[9], data[10]);*/ + /* + dev_dbg(&urb->dev->dev, "%s: %x %x %x %x %x %x %x %x %x %x %x", + __func__, data[0], data[1], data[2], data[3], data[4], + data[5], data[6], data[7], data[8], data[9], data[10]); + */ /* Now do something useful with the data */ msg = (struct keyspan_usa49_portStatusMessage *)data; /* Check port number from message and retrieve private data */ if (msg->portNumber >= serial->num_ports) { - dbg("%s - Unexpected port number %d", - __func__, msg->portNumber); + dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n", + __func__, msg->portNumber); goto exit; } port = serial->port[msg->portNumber]; @@ -656,7 +660,7 @@ static void usa49_instat_callback(struct urb *urb) /* Resubmit urb so we continue receiving */ err = usb_submit_urb(urb, GFP_ATOMIC); if (err != 0) - dbg("%s - resubmit read urb failed. (%d)", __func__, err); + dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err); exit: ; } @@ -676,8 +680,8 @@ static void usa49_indat_callback(struct urb *urb) endpoint = usb_pipeendpoint(urb->pipe); if (status) { - dbg("%s - nonzero status: %x on endpoint %d.", __func__, - status, endpoint); + dev_dbg(&urb->dev->dev, "%s - nonzero status: %x on endpoint %d.\n", + __func__, status, endpoint); return; } @@ -710,7 +714,7 @@ static void usa49_indat_callback(struct urb *urb) /* Resubmit urb so we continue receiving */ err = usb_submit_urb(urb, GFP_ATOMIC); if (err != 0) - dbg("%s - resubmit read urb failed. (%d)", __func__, err); + dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err); } static void usa49wg_indat_callback(struct urb *urb) @@ -725,7 +729,7 @@ static void usa49wg_indat_callback(struct urb *urb) serial = urb->context; if (status) { - dbg("%s - nonzero status: %x", __func__, status); + dev_dbg(&urb->dev->dev, "%s - nonzero status: %x\n", __func__, status); return; } @@ -738,7 +742,7 @@ static void usa49wg_indat_callback(struct urb *urb) /* Check port number from message*/ if (data[i] >= serial->num_ports) { - dbg("%s - Unexpected port number %d", + dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n", __func__, data[i]); return; } @@ -778,7 +782,7 @@ static void usa49wg_indat_callback(struct urb *urb) /* Resubmit urb so we continue receiving */ err = usb_submit_urb(urb, GFP_ATOMIC); if (err != 0) - dbg("%s - resubmit read urb failed. (%d)", __func__, err); + dev_dbg(&urb->dev->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err); } /* not used, usa-49 doesn't have per-port control endpoints */ @@ -799,7 +803,7 @@ static void usa90_indat_callback(struct urb *urb) endpoint = usb_pipeendpoint(urb->pipe); if (status) { - dbg("%s - nonzero status: %x on endpoint %d.", + dev_dbg(&urb->dev->dev, "%s - nonzero status: %x on endpoint %d.\n", __func__, status, endpoint); return; } @@ -828,7 +832,7 @@ static void usa90_indat_callback(struct urb *urb) err); } else { /* some bytes had errors, every byte has status */ - dbg("%s - RX error!!!!", __func__); + dev_dbg(&port->dev, "%s - RX error!!!!\n", __func__); for (i = 0; i + 1 < urb->actual_length; i += 2) { int stat = data[i], flag = 0; if (stat & RXERROR_OVERRUN) @@ -850,7 +854,7 @@ static void usa90_indat_callback(struct urb *urb) /* Resubmit urb so we continue receiving */ err = usb_submit_urb(urb, GFP_ATOMIC); if (err != 0) - dbg("%s - resubmit read urb failed. (%d)", __func__, err); + dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err); } @@ -868,11 +872,11 @@ static void usa90_instat_callback(struct urb *urb) serial = urb->context; if (status) { - dbg("%s - nonzero status: %x", __func__, status); + dev_dbg(&urb->dev->dev, "%s - nonzero status: %x\n", __func__, status); return; } if (urb->actual_length < 14) { - dbg("%s - %d byte report??", __func__, urb->actual_length); + dev_dbg(&urb->dev->dev, "%s - %d byte report??\n", __func__, urb->actual_length); goto exit; } @@ -900,7 +904,7 @@ static void usa90_instat_callback(struct urb *urb) /* Resubmit urb so we continue receiving */ err = usb_submit_urb(urb, GFP_ATOMIC); if (err != 0) - dbg("%s - resubmit read urb failed. (%d)", __func__, err); + dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err); exit: ; } @@ -914,7 +918,7 @@ static void usa90_outcont_callback(struct urb *urb) p_priv = usb_get_serial_port_data(port); if (p_priv->resend_cont) { - dbg("%s - sending setup", __func__); + dev_dbg(&urb->dev->dev, "%s - sending setup\n", __func__); keyspan_usa90_send_setup(port->serial, port, p_priv->resend_cont - 1); } @@ -935,13 +939,13 @@ static void usa67_instat_callback(struct urb *urb) serial = urb->context; if (status) { - dbg("%s - nonzero status: %x", __func__, status); + dev_dbg(&urb->dev->dev, "%s - nonzero status: %x\n", __func__, status); return; } if (urb->actual_length != sizeof(struct keyspan_usa67_portStatusMessage)) { - dbg("%s - bad length %d", __func__, urb->actual_length); + dev_dbg(&urb->dev->dev, "%s - bad length %d\n", __func__, urb->actual_length); return; } @@ -951,7 +955,7 @@ static void usa67_instat_callback(struct urb *urb) /* Check port number from message and retrieve private data */ if (msg->port >= serial->num_ports) { - dbg("%s - Unexpected port number %d", __func__, msg->port); + dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n", __func__, msg->port); return; } @@ -973,7 +977,7 @@ static void usa67_instat_callback(struct urb *urb) /* Resubmit urb so we continue receiving */ err = usb_submit_urb(urb, GFP_ATOMIC); if (err != 0) - dbg("%s - resubmit read urb failed. (%d)", __func__, err); + dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err); } static void usa67_glocont_callback(struct urb *urb) @@ -989,7 +993,7 @@ static void usa67_glocont_callback(struct urb *urb) p_priv = usb_get_serial_port_data(port); if (p_priv->resend_cont) { - dbg("%s - sending setup", __func__); + dev_dbg(&port->dev, "%s - sending setup\n", __func__); keyspan_usa67_send_setup(serial, port, p_priv->resend_cont - 1); break; @@ -1068,8 +1072,7 @@ static int keyspan_open(struct tty_struct *tty, struct usb_serial_port *port) usb_clear_halt(urb->dev, urb->pipe); err = usb_submit_urb(urb, GFP_KERNEL); if (err != 0) - dbg("%s - submit urb %d failed (%d)", - __func__, i, err); + dev_dbg(&port->dev, "%s - submit urb %d failed (%d)\n", __func__, i, err); } /* Reset low level data toggle on out endpoints */ @@ -1092,7 +1095,7 @@ static int keyspan_open(struct tty_struct *tty, struct usb_serial_port *port) baud_rate = tty_get_baud_rate(tty); /* If no match or invalid, leave as default */ if (baud_rate >= 0 - && d_details->calculate_baud_rate(baud_rate, d_details->baudclk, + && d_details->calculate_baud_rate(port, baud_rate, d_details->baudclk, NULL, NULL, NULL, device_port) == KEYSPAN_BAUD_RATE_OK) { p_priv->baud = baud_rate; } @@ -1142,7 +1145,7 @@ static void keyspan_close(struct usb_serial_port *port) } /*while (p_priv->outcont_urb->status == -EINPROGRESS) { - dbg("%s - urb in progress", __func__); + dev_dbg(&port->dev, "%s - urb in progress\n", __func__); }*/ p_priv->out_flip = 0; @@ -1162,18 +1165,15 @@ static void keyspan_close(struct usb_serial_port *port) /* download the firmware to a pre-renumeration device */ static int keyspan_fake_startup(struct usb_serial *serial) { - int response; - const struct ihex_binrec *record; - char *fw_name; - const struct firmware *fw; + char *fw_name; - dbg("Keyspan startup version %04x product %04x", - le16_to_cpu(serial->dev->descriptor.bcdDevice), - le16_to_cpu(serial->dev->descriptor.idProduct)); + dev_dbg(&serial->dev->dev, "Keyspan startup version %04x product %04x\n", + le16_to_cpu(serial->dev->descriptor.bcdDevice), + le16_to_cpu(serial->dev->descriptor.idProduct)); if ((le16_to_cpu(serial->dev->descriptor.bcdDevice) & 0x8000) != 0x8000) { - dbg("Firmware already loaded. Quitting."); + dev_dbg(&serial->dev->dev, "Firmware already loaded. Quitting.\n"); return 1; } @@ -1233,34 +1233,16 @@ static int keyspan_fake_startup(struct usb_serial *serial) return 1; } - if (request_ihex_firmware(&fw, fw_name, &serial->dev->dev)) { - dev_err(&serial->dev->dev, "Required keyspan firmware image (%s) unavailable.\n", fw_name); - return 1; - } - - dbg("Uploading Keyspan %s firmware.", fw_name); + dev_dbg(&serial->dev->dev, "Uploading Keyspan %s firmware.\n", fw_name); - /* download the firmware image */ - response = ezusb_set_reset(serial, 1); - - record = (const struct ihex_binrec *)fw->data; - - while (record) { - response = ezusb_writememory(serial, be32_to_cpu(record->addr), - (unsigned char *)record->data, - be16_to_cpu(record->len), 0xa0); - if (response < 0) { - dev_err(&serial->dev->dev, "ezusb_writememory failed for Keyspan firmware (%d %04X %p %d)\n", - response, be32_to_cpu(record->addr), - record->data, be16_to_cpu(record->len)); - break; - } - record = ihex_next_binrec(record); + if (ezusb_fx1_ihex_firmware_download(serial->dev, fw_name) < 0) { + dev_err(&serial->dev->dev, "failed to load firmware \"%s\"\n", + fw_name); + return -ENOENT; } - release_firmware(fw); - /* bring device out of reset. Renumeration will occur in a - moment and the new device will bind to the real driver */ - response = ezusb_set_reset(serial, 0); + + /* after downloading firmware Renumeration will occur in a + moment and the new device will bind to the real driver */ /* we don't want this device to have a driver assigned to it. */ return 1; @@ -1296,10 +1278,10 @@ static struct urb *keyspan_setup_urb(struct usb_serial *serial, int endpoint, if (endpoint == -1) return NULL; /* endpoint not needed */ - dbg("%s - alloc for endpoint %d.", __func__, endpoint); + dev_dbg(&serial->interface->dev, "%s - alloc for endpoint %d.\n", __func__, endpoint); urb = usb_alloc_urb(0, GFP_KERNEL); /* No ISO */ if (urb == NULL) { - dbg("%s - alloc for endpoint %d failed.", __func__, endpoint); + dev_dbg(&serial->interface->dev, "%s - alloc for endpoint %d failed.\n", __func__, endpoint); return NULL; } @@ -1332,7 +1314,7 @@ static struct urb *keyspan_setup_urb(struct usb_serial *serial, int endpoint, return NULL; } - dbg("%s - using urb %p for %s endpoint %x", + dev_dbg(&serial->interface->dev, "%s - using urb %p for %s endpoint %x\n", __func__, urb, ep_type_name, endpoint); return urb; } @@ -1464,14 +1446,15 @@ static void keyspan_setup_urbs(struct usb_serial *serial) } /* usa19 function doesn't require prescaler */ -static int keyspan_usa19_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi, +static int keyspan_usa19_calc_baud(struct usb_serial_port *port, + u32 baud_rate, u32 baudclk, u8 *rate_hi, u8 *rate_low, u8 *prescaler, int portnum) { u32 b16, /* baud rate times 16 (actual rate used internally) */ div, /* divisor */ cnt; /* inverse of divisor (programmed into 8051) */ - dbg("%s - %d.", __func__, baud_rate); + dev_dbg(&port->dev, "%s - %d.\n", __func__, baud_rate); /* prevent divide by zero... */ b16 = baud_rate * 16L; @@ -1498,19 +1481,20 @@ static int keyspan_usa19_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi, if (rate_hi) *rate_hi = (u8) ((cnt >> 8) & 0xff); if (rate_low && rate_hi) - dbg("%s - %d %02x %02x.", + dev_dbg(&port->dev, "%s - %d %02x %02x.\n", __func__, baud_rate, *rate_hi, *rate_low); return KEYSPAN_BAUD_RATE_OK; } /* usa19hs function doesn't require prescaler */ -static int keyspan_usa19hs_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi, - u8 *rate_low, u8 *prescaler, int portnum) +static int keyspan_usa19hs_calc_baud(struct usb_serial_port *port, + u32 baud_rate, u32 baudclk, u8 *rate_hi, + u8 *rate_low, u8 *prescaler, int portnum) { u32 b16, /* baud rate times 16 (actual rate used internally) */ div; /* divisor */ - dbg("%s - %d.", __func__, baud_rate); + dev_dbg(&port->dev, "%s - %d.\n", __func__, baud_rate); /* prevent divide by zero... */ b16 = baud_rate * 16L; @@ -1533,13 +1517,14 @@ static int keyspan_usa19hs_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi, *rate_hi = (u8) ((div >> 8) & 0xff); if (rate_low && rate_hi) - dbg("%s - %d %02x %02x.", + dev_dbg(&port->dev, "%s - %d %02x %02x.\n", __func__, baud_rate, *rate_hi, *rate_low); return KEYSPAN_BAUD_RATE_OK; } -static int keyspan_usa19w_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi, +static int keyspan_usa19w_calc_baud(struct usb_serial_port *port, + u32 baud_rate, u32 baudclk, u8 *rate_hi, u8 *rate_low, u8 *prescaler, int portnum) { u32 b16, /* baud rate times 16 (actual rate used internally) */ @@ -1551,7 +1536,7 @@ static int keyspan_usa19w_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi, u8 best_prescaler; int i; - dbg("%s - %d.", __func__, baud_rate); + dev_dbg(&port->dev, "%s - %d.\n", __func__, baud_rate); /* prevent divide by zero */ b16 = baud_rate * 16L; @@ -1596,20 +1581,21 @@ static int keyspan_usa19w_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi, *rate_hi = (u8) ((div >> 8) & 0xff); if (prescaler) { *prescaler = best_prescaler; - /* dbg("%s - %d %d", __func__, *prescaler, div); */ + /* dev_dbg(&port->dev, "%s - %d %d\n", __func__, *prescaler, div); */ } return KEYSPAN_BAUD_RATE_OK; } /* USA-28 supports different maximum baud rates on each port */ -static int keyspan_usa28_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi, - u8 *rate_low, u8 *prescaler, int portnum) +static int keyspan_usa28_calc_baud(struct usb_serial_port *port, + u32 baud_rate, u32 baudclk, u8 *rate_hi, + u8 *rate_low, u8 *prescaler, int portnum) { u32 b16, /* baud rate times 16 (actual rate used internally) */ div, /* divisor */ cnt; /* inverse of divisor (programmed into 8051) */ - dbg("%s - %d.", __func__, baud_rate); + dev_dbg(&port->dev, "%s - %d.\n", __func__, baud_rate); /* prevent divide by zero */ b16 = baud_rate * 16L; @@ -1642,7 +1628,7 @@ static int keyspan_usa28_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi, *rate_low = (u8) (cnt & 0xff); if (rate_hi) *rate_hi = (u8) ((cnt >> 8) & 0xff); - dbg("%s - %d OK.", __func__, baud_rate); + dev_dbg(&port->dev, "%s - %d OK.\n", __func__, baud_rate); return KEYSPAN_BAUD_RATE_OK; } @@ -1658,7 +1644,7 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial, struct urb *this_urb; int device_port, err; - dbg("%s reset=%d", __func__, reset_port); + dev_dbg(&port->dev, "%s reset=%d\n", __func__, reset_port); s_priv = usb_get_serial_data(serial); p_priv = usb_get_serial_port_data(port); @@ -1668,11 +1654,11 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial, outcont_urb = d_details->outcont_endpoints[port->number]; this_urb = p_priv->outcont_urb; - dbg("%s - endpoint %d", __func__, usb_pipeendpoint(this_urb->pipe)); + dev_dbg(&port->dev, "%s - endpoint %d\n", __func__, usb_pipeendpoint(this_urb->pipe)); /* Make sure we have an urb then send the message */ if (this_urb == NULL) { - dbg("%s - oops no urb.", __func__); + dev_dbg(&port->dev, "%s - oops no urb.\n", __func__); return -1; } @@ -1681,7 +1667,7 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial, if ((reset_port + 1) > p_priv->resend_cont) p_priv->resend_cont = reset_port + 1; if (this_urb->status == -EINPROGRESS) { - /* dbg("%s - already writing", __func__); */ + /* dev_dbg(&port->dev, "%s - already writing\n", __func__); */ mdelay(5); return -1; } @@ -1692,11 +1678,11 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial, if (p_priv->old_baud != p_priv->baud) { p_priv->old_baud = p_priv->baud; msg.setClocking = 0xff; - if (d_details->calculate_baud_rate - (p_priv->baud, d_details->baudclk, &msg.baudHi, - &msg.baudLo, &msg.prescaler, device_port) == KEYSPAN_INVALID_BAUD_RATE) { - dbg("%s - Invalid baud rate %d requested, using 9600.", - __func__, p_priv->baud); + if (d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk, + &msg.baudHi, &msg.baudLo, &msg.prescaler, + device_port) == KEYSPAN_INVALID_BAUD_RATE) { + dev_dbg(&port->dev, "%s - Invalid baud rate %d requested, using 9600.\n", + __func__, p_priv->baud); msg.baudLo = 0; msg.baudHi = 125; /* Values for 9600 baud */ msg.prescaler = 10; @@ -1790,12 +1776,12 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial, err = usb_submit_urb(this_urb, GFP_ATOMIC); if (err != 0) - dbg("%s - usb_submit_urb(setup) failed (%d)", __func__, err); + dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed (%d)\n", __func__, err); #if 0 else { - dbg("%s - usb_submit_urb(%d) OK %d bytes (end %d)", __func__ - outcont_urb, this_urb->transfer_buffer_length, - usb_pipeendpoint(this_urb->pipe)); + dev_dbg(&port->dev, "%s - usb_submit_urb(%d) OK %d bytes (end %d)\n", __func__ + outcont_urb, this_urb->transfer_buffer_length, + usb_pipeendpoint(this_urb->pipe)); } #endif @@ -1821,7 +1807,7 @@ static int keyspan_usa28_send_setup(struct usb_serial *serial, /* only do something if we have a bulk out endpoint */ this_urb = p_priv->outcont_urb; if (this_urb == NULL) { - dbg("%s - oops no urb.", __func__); + dev_dbg(&port->dev, "%s - oops no urb.\n", __func__); return -1; } @@ -1830,7 +1816,7 @@ static int keyspan_usa28_send_setup(struct usb_serial *serial, if ((reset_port + 1) > p_priv->resend_cont) p_priv->resend_cont = reset_port + 1; if (this_urb->status == -EINPROGRESS) { - dbg("%s already writing", __func__); + dev_dbg(&port->dev, "%s already writing\n", __func__); mdelay(5); return -1; } @@ -1838,9 +1824,10 @@ static int keyspan_usa28_send_setup(struct usb_serial *serial, memset(&msg, 0, sizeof(struct keyspan_usa28_portControlMessage)); msg.setBaudRate = 1; - if (d_details->calculate_baud_rate(p_priv->baud, d_details->baudclk, - &msg.baudHi, &msg.baudLo, NULL, device_port) == KEYSPAN_INVALID_BAUD_RATE) { - dbg("%s - Invalid baud rate requested %d.", + if (d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk, + &msg.baudHi, &msg.baudLo, NULL, + device_port) == KEYSPAN_INVALID_BAUD_RATE) { + dev_dbg(&port->dev, "%s - Invalid baud rate requested %d.\n", __func__, p_priv->baud); msg.baudLo = 0xff; msg.baudHi = 0xb2; /* Values for 9600 baud */ @@ -1915,10 +1902,10 @@ static int keyspan_usa28_send_setup(struct usb_serial *serial, err = usb_submit_urb(this_urb, GFP_ATOMIC); if (err != 0) - dbg("%s - usb_submit_urb(setup) failed", __func__); + dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed\n", __func__); #if 0 else { - dbg("%s - usb_submit_urb(setup) OK %d bytes", __func__, + dev_dbg(&port->dev, "%s - usb_submit_urb(setup) OK %d bytes\n", __func__, this_urb->transfer_buffer_length); } #endif @@ -1949,13 +1936,13 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial, /* Make sure we have an urb then send the message */ if (this_urb == NULL) { - dbg("%s - oops no urb for port %d.", __func__, port->number); + dev_dbg(&port->dev, "%s - oops no urb for port %d.\n", __func__, port->number); return -1; } - dbg("%s - endpoint %d port %d (%d)", - __func__, usb_pipeendpoint(this_urb->pipe), - port->number, device_port); + dev_dbg(&port->dev, "%s - endpoint %d port %d (%d)\n", + __func__, usb_pipeendpoint(this_urb->pipe), + port->number, device_port); /* Save reset port val for resend. Don't overwrite resend for open/close condition. */ @@ -1963,7 +1950,7 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial, p_priv->resend_cont = reset_port + 1; if (this_urb->status == -EINPROGRESS) { - /* dbg("%s - already writing", __func__); */ + /* dev_dbg(&port->dev, "%s - already writing\n", __func__); */ mdelay(5); return -1; } @@ -1977,11 +1964,11 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial, if (p_priv->old_baud != p_priv->baud) { p_priv->old_baud = p_priv->baud; msg.setClocking = 0xff; - if (d_details->calculate_baud_rate - (p_priv->baud, d_details->baudclk, &msg.baudHi, - &msg.baudLo, &msg.prescaler, device_port) == KEYSPAN_INVALID_BAUD_RATE) { - dbg("%s - Invalid baud rate %d requested, using 9600.", - __func__, p_priv->baud); + if (d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk, + &msg.baudHi, &msg.baudLo, &msg.prescaler, + device_port) == KEYSPAN_INVALID_BAUD_RATE) { + dev_dbg(&port->dev, "%s - Invalid baud rate %d requested, using 9600.\n", + __func__, p_priv->baud); msg.baudLo = 0; msg.baudHi = 125; /* Values for 9600 baud */ msg.prescaler = 10; @@ -2100,12 +2087,12 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial, } err = usb_submit_urb(this_urb, GFP_ATOMIC); if (err != 0) - dbg("%s - usb_submit_urb(setup) failed (%d)", __func__, err); + dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed (%d)\n", __func__, err); #if 0 else { - dbg("%s - usb_submit_urb(%d) OK %d bytes (end %d)", __func__, - outcont_urb, this_urb->transfer_buffer_length, - usb_pipeendpoint(this_urb->pipe)); + dev_dbg(&port->dev, "%s - usb_submit_urb(%d) OK %d bytes (end %d)\n", __func__, + outcont_urb, this_urb->transfer_buffer_length, + usb_pipeendpoint(this_urb->pipe)); } #endif @@ -2131,7 +2118,7 @@ static int keyspan_usa90_send_setup(struct usb_serial *serial, /* only do something if we have a bulk out endpoint */ this_urb = p_priv->outcont_urb; if (this_urb == NULL) { - dbg("%s - oops no urb.", __func__); + dev_dbg(&port->dev, "%s - oops no urb.\n", __func__); return -1; } @@ -2140,7 +2127,7 @@ static int keyspan_usa90_send_setup(struct usb_serial *serial, if ((reset_port + 1) > p_priv->resend_cont) p_priv->resend_cont = reset_port + 1; if (this_urb->status == -EINPROGRESS) { - dbg("%s already writing", __func__); + dev_dbg(&port->dev, "%s already writing\n", __func__); mdelay(5); return -1; } @@ -2151,13 +2138,12 @@ static int keyspan_usa90_send_setup(struct usb_serial *serial, if (p_priv->old_baud != p_priv->baud) { p_priv->old_baud = p_priv->baud; msg.setClocking = 0x01; - if (d_details->calculate_baud_rate - (p_priv->baud, d_details->baudclk, &msg.baudHi, - &msg.baudLo, &prescaler, 0) == KEYSPAN_INVALID_BAUD_RATE) { - dbg("%s - Invalid baud rate %d requested, using 9600.", - __func__, p_priv->baud); + if (d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk, + &msg.baudHi, &msg.baudLo, &prescaler, 0) == KEYSPAN_INVALID_BAUD_RATE) { + dev_dbg(&port->dev, "%s - Invalid baud rate %d requested, using 9600.\n", + __func__, p_priv->baud); p_priv->baud = 9600; - d_details->calculate_baud_rate(p_priv->baud, d_details->baudclk, + d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk, &msg.baudHi, &msg.baudLo, &prescaler, 0); } msg.setRxMode = 1; @@ -2239,7 +2225,7 @@ static int keyspan_usa90_send_setup(struct usb_serial *serial, err = usb_submit_urb(this_urb, GFP_ATOMIC); if (err != 0) - dbg("%s - usb_submit_urb(setup) failed (%d)", __func__, err); + dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed (%d)\n", __func__, err); return 0; } @@ -2265,7 +2251,7 @@ static int keyspan_usa67_send_setup(struct usb_serial *serial, /* Make sure we have an urb then send the message */ if (this_urb == NULL) { - dbg("%s - oops no urb for port %d.", __func__, + dev_dbg(&port->dev, "%s - oops no urb for port %d.\n", __func__, port->number); return -1; } @@ -2275,7 +2261,7 @@ static int keyspan_usa67_send_setup(struct usb_serial *serial, if ((reset_port + 1) > p_priv->resend_cont) p_priv->resend_cont = reset_port + 1; if (this_urb->status == -EINPROGRESS) { - /* dbg("%s - already writing", __func__); */ + /* dev_dbg(&port->dev, "%s - already writing\n", __func__); */ mdelay(5); return -1; } @@ -2288,11 +2274,11 @@ static int keyspan_usa67_send_setup(struct usb_serial *serial, if (p_priv->old_baud != p_priv->baud) { p_priv->old_baud = p_priv->baud; msg.setClocking = 0xff; - if (d_details->calculate_baud_rate - (p_priv->baud, d_details->baudclk, &msg.baudHi, - &msg.baudLo, &msg.prescaler, device_port) == KEYSPAN_INVALID_BAUD_RATE) { - dbg("%s - Invalid baud rate %d requested, using 9600.", - __func__, p_priv->baud); + if (d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk, + &msg.baudHi, &msg.baudLo, &msg.prescaler, + device_port) == KEYSPAN_INVALID_BAUD_RATE) { + dev_dbg(&port->dev, "%s - Invalid baud rate %d requested, using 9600.\n", + __func__, p_priv->baud); msg.baudLo = 0; msg.baudHi = 125; /* Values for 9600 baud */ msg.prescaler = 10; @@ -2383,8 +2369,7 @@ static int keyspan_usa67_send_setup(struct usb_serial *serial, err = usb_submit_urb(this_urb, GFP_ATOMIC); if (err != 0) - dbg("%s - usb_submit_urb(setup) failed (%d)", __func__, - err); + dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed (%d)\n", __func__, err); return 0; } @@ -2440,8 +2425,7 @@ static int keyspan_startup(struct usb_serial *serial) /* Setup private data for serial driver */ s_priv = kzalloc(sizeof(struct keyspan_serial_private), GFP_KERNEL); if (!s_priv) { - dbg("%s - kmalloc for keyspan_serial_private failed.", - __func__); + dev_dbg(&serial->dev->dev, "%s - kmalloc for keyspan_serial_private failed.\n", __func__); return -ENOMEM; } @@ -2454,7 +2438,7 @@ static int keyspan_startup(struct usb_serial *serial) p_priv = kzalloc(sizeof(struct keyspan_port_private), GFP_KERNEL); if (!p_priv) { - dbg("%s - kmalloc for keyspan_port_private (%d) failed!.", __func__, i); + dev_dbg(&port->dev, "%s - kmalloc for keyspan_port_private (%d) failed!.\n", __func__, i); return 1; } p_priv->device_details = d_details; @@ -2466,14 +2450,12 @@ static int keyspan_startup(struct usb_serial *serial) if (s_priv->instat_urb != NULL) { err = usb_submit_urb(s_priv->instat_urb, GFP_KERNEL); if (err != 0) - dbg("%s - submit instat urb failed %d", __func__, - err); + dev_dbg(&serial->dev->dev, "%s - submit instat urb failed %d\n", __func__, err); } if (s_priv->indat_urb != NULL) { err = usb_submit_urb(s_priv->indat_urb, GFP_KERNEL); if (err != 0) - dbg("%s - submit indat urb failed %d", __func__, - err); + dev_dbg(&serial->dev->dev, "%s - submit indat urb failed %d\n", __func__, err); } return 0; @@ -2527,10 +2509,8 @@ static void keyspan_release(struct usb_serial *serial) s_priv = usb_get_serial_data(serial); - /* dbg("Freeing serial->private."); */ kfree(s_priv); - /* dbg("Freeing port->private."); */ /* Now free per port private data */ for (i = 0; i < serial->num_ports; i++) { port = serial->port[i]; @@ -2554,7 +2534,3 @@ MODULE_FIRMWARE("keyspan/usa18x.fw"); MODULE_FIRMWARE("keyspan/usa19w.fw"); MODULE_FIRMWARE("keyspan/usa49w.fw"); MODULE_FIRMWARE("keyspan/usa49wlc.fw"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); - diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h index fe1c5d91692c..0a8a40b5711e 100644 --- a/drivers/usb/serial/keyspan.h +++ b/drivers/usb/serial/keyspan.h @@ -64,19 +64,23 @@ static int keyspan_tiocmset (struct tty_struct *tty, unsigned int clear); static int keyspan_fake_startup (struct usb_serial *serial); -static int keyspan_usa19_calc_baud (u32 baud_rate, u32 baudclk, +static int keyspan_usa19_calc_baud (struct usb_serial_port *port, + u32 baud_rate, u32 baudclk, u8 *rate_hi, u8 *rate_low, u8 *prescaler, int portnum); -static int keyspan_usa19w_calc_baud (u32 baud_rate, u32 baudclk, +static int keyspan_usa19w_calc_baud (struct usb_serial_port *port, + u32 baud_rate, u32 baudclk, u8 *rate_hi, u8 *rate_low, u8 *prescaler, int portnum); -static int keyspan_usa28_calc_baud (u32 baud_rate, u32 baudclk, +static int keyspan_usa28_calc_baud (struct usb_serial_port *port, + u32 baud_rate, u32 baudclk, u8 *rate_hi, u8 *rate_low, u8 *prescaler, int portnum); -static int keyspan_usa19hs_calc_baud (u32 baud_rate, u32 baudclk, +static int keyspan_usa19hs_calc_baud (struct usb_serial_port *port, + u32 baud_rate, u32 baudclk, u8 *rate_hi, u8 *rate_low, u8 *prescaler, int portnum); @@ -188,8 +192,9 @@ struct keyspan_device_details { /* Endpoint used for global control functions */ int glocont_endpoint; - int (*calculate_baud_rate) (u32 baud_rate, u32 baudclk, - u8 *rate_hi, u8 *rate_low, u8 *prescaler, int portnum); + int (*calculate_baud_rate) (struct usb_serial_port *port, + u32 baud_rate, u32 baudclk, + u8 *rate_hi, u8 *rate_low, u8 *prescaler, int portnum); u32 baudclk; }; diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index dcada8615fcf..ca43ecb4a2bd 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -25,13 +25,10 @@ #include <linux/module.h> #include <linux/spinlock.h> #include <linux/workqueue.h> -#include <linux/firmware.h> -#include <linux/ihex.h> #include <linux/uaccess.h> #include <linux/usb.h> #include <linux/usb/serial.h> - -static bool debug; +#include <linux/usb/ezusb.h> /* make a simple define to handle if we are compiling keyspan_pda or xircom support */ #if defined(CONFIG_USB_SERIAL_KEYSPAN_PDA) || defined(CONFIG_USB_SERIAL_KEYSPAN_PDA_MODULE) @@ -137,8 +134,8 @@ static void keyspan_pda_request_unthrottle(struct work_struct *work) 0, 2000); if (result < 0) - dbg("%s - error %d from usb_control_msg", - __func__, result); + dev_dbg(&serial->dev->dev, "%s - error %d from usb_control_msg\n", + __func__, result); } @@ -160,12 +157,10 @@ static void keyspan_pda_rx_interrupt(struct urb *urb) case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", - __func__, status); + dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d\n", __func__, status); return; default: - dbg("%s - nonzero urb status received: %d", - __func__, status); + dev_dbg(&urb->dev->dev, "%s - nonzero urb status received: %d\n", __func__, status); goto exit; } @@ -183,7 +178,7 @@ static void keyspan_pda_rx_interrupt(struct urb *urb) break; case 1: /* status interrupt */ - dbg(" rx int, d1=%d, d2=%d", data[1], data[2]); + dev_dbg(&port->dev, "rx int, d1=%d, d2=%d\n", data[1], data[2]); switch (data[1]) { case 1: /* modemline change */ break; @@ -229,7 +224,7 @@ static void keyspan_pda_rx_unthrottle(struct tty_struct *tty) /* just restart the receive interrupt URB */ if (usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL)) - dbg(" usb_submit_urb(read urb) failed"); + dev_dbg(&port->dev, "usb_submit_urb(read urb) failed\n"); } @@ -308,8 +303,8 @@ static void keyspan_pda_break_ctl(struct tty_struct *tty, int break_state) USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, value, 0, NULL, 0, 2000); if (result < 0) - dbg("%s - error %d from usb_control_msg", - __func__, result); + dev_dbg(&port->dev, "%s - error %d from usb_control_msg\n", + __func__, result); /* there is something funky about this.. the TCSBRK that 'cu' performs ought to translate into a break_ctl(-1),break_ctl(0) pair HZ/4 seconds apart, but it feels like the break sent isn't as long as it @@ -347,7 +342,7 @@ static void keyspan_pda_set_termios(struct tty_struct *tty, speed = keyspan_pda_setbaud(serial, speed); if (speed == 0) { - dbg("can't handle requested baud rate"); + dev_dbg(&port->dev, "can't handle requested baud rate\n"); /* It hasn't changed so.. */ speed = tty_termios_baud_rate(old_termios); } @@ -459,7 +454,7 @@ static int keyspan_pda_write(struct tty_struct *tty, Block if we can't write anything at all, otherwise write as much as we can. */ if (count == 0) { - dbg(" write request of 0 bytes"); + dev_dbg(&port->dev, "write request of 0 bytes\n"); return 0; } @@ -505,16 +500,16 @@ static int keyspan_pda_write(struct tty_struct *tty, 1, 2000); if (rc > 0) { - dbg(" roomquery says %d", *room); + dev_dbg(&port->dev, "roomquery says %d\n", *room); priv->tx_room = *room; } kfree(room); if (rc < 0) { - dbg(" roomquery failed"); + dev_dbg(&port->dev, "roomquery failed\n"); goto exit; } if (rc == 0) { - dbg(" roomquery returned 0 bytes"); + dev_dbg(&port->dev, "roomquery returned 0 bytes\n"); rc = -EIO; /* device didn't return any data */ goto exit; } @@ -536,7 +531,7 @@ static int keyspan_pda_write(struct tty_struct *tty, rc = usb_submit_urb(port->write_urb, GFP_ATOMIC); if (rc) { - dbg(" usb_submit_urb(write bulk) failed"); + dev_dbg(&port->dev, "usb_submit_urb(write bulk) failed\n"); goto exit; } } else { @@ -639,11 +634,11 @@ static int keyspan_pda_open(struct tty_struct *tty, 1, 2000); if (rc < 0) { - dbg("%s - roomquery failed", __func__); + dev_dbg(&port->dev, "%s - roomquery failed\n", __func__); goto error; } if (rc == 0) { - dbg("%s - roomquery returned 0 bytes", __func__); + dev_dbg(&port->dev, "%s - roomquery returned 0 bytes\n", __func__); rc = -EIO; goto error; } @@ -654,7 +649,7 @@ static int keyspan_pda_open(struct tty_struct *tty, /*Start reading from the device*/ rc = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); if (rc) { - dbg("%s - usb_submit_urb(read int) failed", __func__); + dev_dbg(&port->dev, "%s - usb_submit_urb(read int) failed\n", __func__); goto error; } error: @@ -678,11 +673,9 @@ static int keyspan_pda_fake_startup(struct usb_serial *serial) { int response; const char *fw_name; - const struct ihex_binrec *record; - const struct firmware *fw; /* download the firmware here ... */ - response = ezusb_set_reset(serial, 1); + response = ezusb_fx1_set_reset(serial->dev, 1); if (0) { ; } #ifdef KEYSPAN @@ -699,30 +692,15 @@ static int keyspan_pda_fake_startup(struct usb_serial *serial) __func__); return -ENODEV; } - if (request_ihex_firmware(&fw, fw_name, &serial->dev->dev)) { + + if (ezusb_fx1_ihex_firmware_download(serial->dev, fw_name) < 0) { dev_err(&serial->dev->dev, "failed to load firmware \"%s\"\n", fw_name); return -ENOENT; } - record = (const struct ihex_binrec *)fw->data; - - while (record) { - response = ezusb_writememory(serial, be32_to_cpu(record->addr), - (unsigned char *)record->data, - be16_to_cpu(record->len), 0xa0); - if (response < 0) { - dev_err(&serial->dev->dev, "ezusb_writememory failed " - "for Keyspan PDA firmware (%d %04X %p %d)\n", - response, be32_to_cpu(record->addr), - record->data, be16_to_cpu(record->len)); - break; - } - record = ihex_next_binrec(record); - } - release_firmware(fw); - /* bring device out of reset. Renumeration will occur in a moment - and the new device will bind to the real driver */ - response = ezusb_set_reset(serial, 0); + + /* after downloading firmware Renumeration will occur in a + moment and the new device will bind to the real driver */ /* we want this device to fail to have a driver assigned to it. */ return 1; @@ -828,6 +806,3 @@ module_usb_serial_driver(serial_drivers, id_table_combined); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index def9ad258715..3f6d7376c02d 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -49,8 +49,6 @@ #include <linux/usb/serial.h> #include "kl5kusb105.h" -static bool debug; - /* * Version Information */ @@ -239,7 +237,9 @@ static int klsi_105_startup(struct usb_serial *serial) priv = kmalloc(sizeof(struct klsi_105_private), GFP_KERNEL); if (!priv) { - dbg("%skmalloc for klsi_105_private failed.", __func__); + dev_dbg(&serial->interface->dev, + "%s - kmalloc for klsi_105_private failed.\n", + __func__); i--; goto err_cleanup; } @@ -344,14 +344,14 @@ static int klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port) dev_err(&port->dev, "Enabling read failed (error = %d)\n", rc); retval = rc; } else - dbg("%s - enabled reading", __func__); + dev_dbg(&port->dev, "%s - enabled reading\n", __func__); rc = klsi_105_get_line_state(port, &line_state); if (rc >= 0) { spin_lock_irqsave(&priv->lock, flags); priv->line_state = line_state; spin_unlock_irqrestore(&priv->lock, flags); - dbg("%s - read line state 0x%lx", __func__, line_state); + dev_dbg(&port->dev, "%s - read line state 0x%lx\n", __func__, line_state); retval = 0; } else retval = rc; @@ -421,7 +421,7 @@ static void klsi_105_process_read_urb(struct urb *urb) return; if (urb->actual_length <= KLSI_HDR_LEN) { - dbg("%s - malformed packet", __func__); + dev_dbg(&port->dev, "%s - malformed packet\n", __func__); return; } @@ -431,7 +431,7 @@ static void klsi_105_process_read_urb(struct urb *urb) len = get_unaligned_le16(data); if (len > urb->actual_length - KLSI_HDR_LEN) { - dbg("%s - packet length mismatch", __func__); + dev_dbg(&port->dev, "%s - packet length mismatch\n", __func__); len = urb->actual_length - KLSI_HDR_LEN; } @@ -445,6 +445,7 @@ static void klsi_105_set_termios(struct tty_struct *tty, struct ktermios *old_termios) { struct klsi_105_private *priv = usb_get_serial_port_data(port); + struct device *dev = &port->dev; unsigned int iflag = tty->termios.c_iflag; unsigned int old_iflag = old_termios->c_iflag; unsigned int cflag = tty->termios.c_cflag; @@ -455,8 +456,7 @@ static void klsi_105_set_termios(struct tty_struct *tty, cfg = kmalloc(sizeof(*cfg), GFP_KERNEL); if (!cfg) { - dev_err(&port->dev, "%s - out of memory for config buffer.\n", - __func__); + dev_err(dev, "%s - out of memory for config buffer.\n", __func__); return; } @@ -471,7 +471,7 @@ static void klsi_105_set_termios(struct tty_struct *tty, if ((cflag & CBAUD) != (old_cflag & CBAUD)) { /* reassert DTR and (maybe) RTS on transition from B0 */ if ((old_cflag & CBAUD) == B0) { - dbg("%s: baud was B0", __func__); + dev_dbg(dev, "%s: baud was B0\n", __func__); #if 0 priv->control_state |= TIOCM_DTR; /* don't set RTS if using hardware flow control */ @@ -509,14 +509,13 @@ static void klsi_105_set_termios(struct tty_struct *tty, priv->cfg.baudrate = kl5kusb105a_sio_b115200; break; default: - dbg("KLSI USB->Serial converter:" - " unsupported baudrate request, using default of 9600"); - priv->cfg.baudrate = kl5kusb105a_sio_b9600; + dev_dbg(dev, "KLSI USB->Serial converter: unsupported baudrate request, using default of 9600"); + priv->cfg.baudrate = kl5kusb105a_sio_b9600; baud = 9600; break; } if ((cflag & CBAUD) == B0) { - dbg("%s: baud is B0", __func__); + dev_dbg(dev, "%s: baud is B0\n", __func__); /* Drop RTS and DTR */ /* maybe this should be simulated by sending read * disable and read enable messages? @@ -533,11 +532,11 @@ static void klsi_105_set_termios(struct tty_struct *tty, /* set the number of data bits */ switch (cflag & CSIZE) { case CS5: - dbg("%s - 5 bits/byte not supported", __func__); + dev_dbg(dev, "%s - 5 bits/byte not supported\n", __func__); spin_unlock_irqrestore(&priv->lock, flags); goto err; case CS6: - dbg("%s - 6 bits/byte not supported", __func__); + dev_dbg(dev, "%s - 6 bits/byte not supported\n", __func__); spin_unlock_irqrestore(&priv->lock, flags); goto err; case CS7: @@ -547,8 +546,7 @@ static void klsi_105_set_termios(struct tty_struct *tty, priv->cfg.databits = kl5kusb105a_dtb_8; break; default: - dev_err(&port->dev, - "CSIZE was not CS5-CS8, using default of 8\n"); + dev_err(dev, "CSIZE was not CS5-CS8, using default of 8\n"); priv->cfg.databits = kl5kusb105a_dtb_8; break; } @@ -616,7 +614,7 @@ static void mct_u232_break_ctl(struct tty_struct *tty, int break_state) (struct mct_u232_private *)port->private; unsigned char lcr = priv->last_lcr; - dbg("%sstate=%d", __func__, break_state); + dev_dbg(&port->dev, "%s - state=%d\n", __func__, break_state); /* LOCKING */ if (break_state) @@ -645,7 +643,7 @@ static int klsi_105_tiocmget(struct tty_struct *tty) spin_lock_irqsave(&priv->lock, flags); priv->line_state = line_state; spin_unlock_irqrestore(&priv->lock, flags); - dbg("%s - read line state 0x%lx", __func__, line_state); + dev_dbg(&port->dev, "%s - read line state 0x%lx\n", __func__, line_state); return (int)line_state; } @@ -681,6 +679,3 @@ module_usb_serial_driver(serial_drivers, id_table); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "enable extensive debugging messages"); diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index bf5c74965d34..5c4d2fbd4e11 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -38,8 +38,6 @@ #include <linux/ioctl.h> #include "kobil_sct.h" -static bool debug; - /* Version Information */ #define DRIVER_VERSION "21/05/2004" #define DRIVER_AUTHOR "KOBIL Systems GmbH - http://www.kobil.com" @@ -139,17 +137,16 @@ static int kobil_startup(struct usb_serial *serial) switch (priv->device_type) { case KOBIL_ADAPTER_B_PRODUCT_ID: - printk(KERN_DEBUG "KOBIL B1 PRO / KAAN PRO detected\n"); + dev_dbg(&serial->dev->dev, "KOBIL B1 PRO / KAAN PRO detected\n"); break; case KOBIL_ADAPTER_K_PRODUCT_ID: - printk(KERN_DEBUG - "KOBIL KAAN Standard Plus / SecOVID Reader Plus detected\n"); + dev_dbg(&serial->dev->dev, "KOBIL KAAN Standard Plus / SecOVID Reader Plus detected\n"); break; case KOBIL_USBTWIN_PRODUCT_ID: - printk(KERN_DEBUG "KOBIL USBTWIN detected\n"); + dev_dbg(&serial->dev->dev, "KOBIL USBTWIN detected\n"); break; case KOBIL_KAAN_SIM_PRODUCT_ID: - printk(KERN_DEBUG "KOBIL KAAN SIM detected\n"); + dev_dbg(&serial->dev->dev, "KOBIL KAAN SIM detected\n"); break; } usb_set_serial_port_data(serial->port[0], priv); @@ -164,13 +161,15 @@ static int kobil_startup(struct usb_serial *serial) for (i = 0; i < altsetting->desc.bNumEndpoints; i++) { endpoint = &altsetting->endpoint[i]; if (usb_endpoint_is_int_out(&endpoint->desc)) { - dbg("%s Found interrupt out endpoint. Address: %d", + dev_dbg(&serial->dev->dev, + "%s Found interrupt out endpoint. Address: %d\n", __func__, endpoint->desc.bEndpointAddress); priv->write_int_endpoint_address = endpoint->desc.bEndpointAddress; } if (usb_endpoint_is_int_in(&endpoint->desc)) { - dbg("%s Found interrupt in endpoint. Address: %d", + dev_dbg(&serial->dev->dev, + "%s Found interrupt in endpoint. Address: %d\n", __func__, endpoint->desc.bEndpointAddress); priv->read_int_endpoint_address = endpoint->desc.bEndpointAddress; @@ -200,6 +199,7 @@ static void kobil_init_termios(struct tty_struct *tty) static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port) { + struct device *dev = &port->dev; int result = 0; struct kobil_private *priv; unsigned char *transfer_buffer; @@ -215,12 +215,10 @@ static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port) /* allocate write_urb */ if (!port->write_urb) { - dbg("%s - port %d Allocating port->write_urb", - __func__, port->number); + dev_dbg(dev, "%s - Allocating port->write_urb\n", __func__); port->write_urb = usb_alloc_urb(0, GFP_KERNEL); if (!port->write_urb) { - dbg("%s - port %d usb_alloc_urb failed", - __func__, port->number); + dev_dbg(dev, "%s - usb_alloc_urb failed\n", __func__); kfree(transfer_buffer); return -ENOMEM; } @@ -247,10 +245,9 @@ static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port) transfer_buffer_length, KOBIL_TIMEOUT ); - dbg("%s - port %d Send get_HW_version URB returns: %i", - __func__, port->number, result); - dbg("Harware version: %i.%i.%i", - transfer_buffer[0], transfer_buffer[1], transfer_buffer[2]); + dev_dbg(dev, "%s - Send get_HW_version URB returns: %i\n", __func__, result); + dev_dbg(dev, "Harware version: %i.%i.%i\n", transfer_buffer[0], + transfer_buffer[1], transfer_buffer[2]); /* get firmware version */ result = usb_control_msg(port->serial->dev, @@ -263,10 +260,9 @@ static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port) transfer_buffer_length, KOBIL_TIMEOUT ); - dbg("%s - port %d Send get_FW_version URB returns: %i", - __func__, port->number, result); - dbg("Firmware version: %i.%i.%i", - transfer_buffer[0], transfer_buffer[1], transfer_buffer[2]); + dev_dbg(dev, "%s - Send get_FW_version URB returns: %i\n", __func__, result); + dev_dbg(dev, "Firmware version: %i.%i.%i\n", transfer_buffer[0], + transfer_buffer[1], transfer_buffer[2]); if (priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID || priv->device_type == KOBIL_ADAPTER_K_PRODUCT_ID) { @@ -282,8 +278,7 @@ static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port) 0, KOBIL_TIMEOUT ); - dbg("%s - port %d Send set_baudrate URB returns: %i", - __func__, port->number, result); + dev_dbg(dev, "%s - Send set_baudrate URB returns: %i\n", __func__, result); /* reset all queues */ result = usb_control_msg(port->serial->dev, @@ -296,16 +291,14 @@ static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port) 0, KOBIL_TIMEOUT ); - dbg("%s - port %d Send reset_all_queues URB returns: %i", - __func__, port->number, result); + dev_dbg(dev, "%s - Send reset_all_queues URB returns: %i\n", __func__, result); } if (priv->device_type == KOBIL_USBTWIN_PRODUCT_ID || priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID || priv->device_type == KOBIL_KAAN_SIM_PRODUCT_ID) { /* start reading (Adapter B 'cause PNP string) */ result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC); - dbg("%s - port %d Send read URB returns: %i", - __func__, port->number, result); + dev_dbg(dev, "%s - Send read URB returns: %i\n", __func__, result); } kfree(transfer_buffer); @@ -333,11 +326,9 @@ static void kobil_read_int_callback(struct urb *urb) struct tty_struct *tty; unsigned char *data = urb->transfer_buffer; int status = urb->status; -/* char *dbg_data; */ if (status) { - dbg("%s - port %d Read int status not zero: %d", - __func__, port->number, status); + dev_dbg(&port->dev, "%s - Read int status not zero: %d\n", __func__, status); return; } @@ -346,6 +337,8 @@ static void kobil_read_int_callback(struct urb *urb) /* BEGIN DEBUG */ /* + char *dbg_data; + dbg_data = kzalloc((3 * purb->actual_length + 10) * sizeof(char), GFP_KERNEL); if (! dbg_data) { @@ -354,7 +347,7 @@ static void kobil_read_int_callback(struct urb *urb) for (i = 0; i < purb->actual_length; i++) { sprintf(dbg_data +3*i, "%02X ", data[i]); } - dbg(" <-- %s", dbg_data); + dev_dbg(&port->dev, " <-- %s\n", dbg_data); kfree(dbg_data); */ /* END DEBUG */ @@ -365,8 +358,7 @@ static void kobil_read_int_callback(struct urb *urb) tty_kref_put(tty); result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC); - dbg("%s - port %d Send read URB returns: %i", - __func__, port->number, result); + dev_dbg(&port->dev, "%s - Send read URB returns: %i\n", __func__, result); } @@ -384,22 +376,20 @@ static int kobil_write(struct tty_struct *tty, struct usb_serial_port *port, struct kobil_private *priv; if (count == 0) { - dbg("%s - port %d write request of 0 bytes", - __func__, port->number); + dev_dbg(&port->dev, "%s - write request of 0 bytes\n", __func__); return 0; } priv = usb_get_serial_port_data(port); if (count > (KOBIL_BUF_LENGTH - priv->filled)) { - dbg("%s - port %d Error: write request bigger than buffer size", __func__, port->number); + dev_dbg(&port->dev, "%s - Error: write request bigger than buffer size\n", __func__); return -ENOMEM; } /* Copy data to buffer */ memcpy(priv->buf + priv->filled, buf, count); - usb_serial_debug_data(debug, &port->dev, __func__, count, - priv->buf + priv->filled); + usb_serial_debug_data(&port->dev, __func__, count, priv->buf + priv->filled); priv->filled = priv->filled + count; /* only send complete block. TWIN, KAAN SIM and adapter K @@ -432,8 +422,7 @@ static int kobil_write(struct tty_struct *tty, struct usb_serial_port *port, priv->cur_pos = priv->cur_pos + length; result = usb_submit_urb(port->write_urb, GFP_NOIO); - dbg("%s - port %d Send write URB returns: %i", - __func__, port->number, result); + dev_dbg(&port->dev, "%s - Send write URB returns: %i\n", __func__, result); todo = priv->filled - priv->cur_pos; if (todo > 0) @@ -448,8 +437,7 @@ static int kobil_write(struct tty_struct *tty, struct usb_serial_port *port, priv->device_type == KOBIL_ADAPTER_K_PRODUCT_ID) { result = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO); - dbg("%s - port %d Send read URB returns: %i", - __func__, port->number, result); + dev_dbg(&port->dev, "%s - Send read URB returns: %i\n", __func__, result); } } return count; @@ -493,8 +481,8 @@ static int kobil_tiocmget(struct tty_struct *tty) transfer_buffer_length, KOBIL_TIMEOUT); - dbg("%s - port %d Send get_status_line_state URB returns: %i. Statusline: %02x", - __func__, port->number, result, transfer_buffer[0]); + dev_dbg(&port->dev, "%s - Send get_status_line_state URB returns: %i. Statusline: %02x\n", + __func__, result, transfer_buffer[0]); result = 0; if ((transfer_buffer[0] & SUSBCR_GSL_DSR) != 0) @@ -507,6 +495,7 @@ static int kobil_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; + struct device *dev = &port->dev; struct kobil_private *priv; int result; int dtr = 0; @@ -538,11 +527,9 @@ static int kobil_tiocmset(struct tty_struct *tty, if (priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID) { if (dtr != 0) - dbg("%s - port %d Setting DTR", - __func__, port->number); + dev_dbg(dev, "%s - Setting DTR\n", __func__); else - dbg("%s - port %d Clearing DTR", - __func__, port->number); + dev_dbg(dev, "%s - Clearing DTR\n", __func__); result = usb_control_msg(port->serial->dev, usb_rcvctrlpipe(port->serial->dev, 0), SUSBCRequest_SetStatusLinesOrQueues, @@ -554,11 +541,9 @@ static int kobil_tiocmset(struct tty_struct *tty, KOBIL_TIMEOUT); } else { if (rts != 0) - dbg("%s - port %d Setting RTS", - __func__, port->number); + dev_dbg(dev, "%s - Setting RTS\n", __func__); else - dbg("%s - port %d Clearing RTS", - __func__, port->number); + dev_dbg(dev, "%s - Clearing RTS\n", __func__); result = usb_control_msg(port->serial->dev, usb_rcvctrlpipe(port->serial->dev, 0), SUSBCRequest_SetStatusLinesOrQueues, @@ -569,8 +554,7 @@ static int kobil_tiocmset(struct tty_struct *tty, 0, KOBIL_TIMEOUT); } - dbg("%s - port %d Send set_status_line URB returns: %i", - __func__, port->number, result); + dev_dbg(dev, "%s - Send set_status_line URB returns: %i\n", __func__, result); kfree(transfer_buffer); return (result < 0) ? result : 0; } @@ -658,7 +642,8 @@ static int kobil_ioctl(struct tty_struct *tty, KOBIL_TIMEOUT ); - dbg("%s - port %d Send reset_all_queues (FLUSH) URB returns: %i", __func__, port->number, result); + dev_dbg(&port->dev, + "%s - Send reset_all_queues (FLUSH) URB returns: %i", __func__, result); kfree(transfer_buffer); return (result < 0) ? -EIO: 0; default: @@ -671,6 +656,3 @@ module_usb_serial_driver(serial_drivers, id_table); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c index df98cffdba65..f3947712e137 100644 --- a/drivers/usb/serial/mct_u232.c +++ b/drivers/usb/serial/mct_u232.c @@ -45,8 +45,6 @@ #define DRIVER_AUTHOR "Wolfgang Grandegger <wolfgang@ces.ch>" #define DRIVER_DESC "Magic Control Technology USB-RS232 converter driver" -static bool debug; - /* * Function prototypes */ @@ -214,7 +212,7 @@ static int mct_u232_set_baud_rate(struct tty_struct *tty, value, rc); else tty_encode_baud_rate(tty, speed, speed); - dbg("set_baud_rate: value: 0x%x, divisor: 0x%x", value, divisor); + dev_dbg(&port->dev, "set_baud_rate: value: 0x%x, divisor: 0x%x\n", value, divisor); /* Mimic the MCT-supplied Windows driver (version 1.21P.0104), which always sends two extra USB 'device request' messages after the @@ -247,8 +245,8 @@ static int mct_u232_set_baud_rate(struct tty_struct *tty, if (port && C_CRTSCTS(tty)) cts_enable_byte = 1; - dbg("set_baud_rate: send second control message, data = %02X", - cts_enable_byte); + dev_dbg(&port->dev, "set_baud_rate: send second control message, data = %02X\n", + cts_enable_byte); buf[0] = cts_enable_byte; rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), MCT_U232_SET_CTS_REQUEST, @@ -263,7 +261,8 @@ static int mct_u232_set_baud_rate(struct tty_struct *tty, return rc; } /* mct_u232_set_baud_rate */ -static int mct_u232_set_line_ctrl(struct usb_serial *serial, unsigned char lcr) +static int mct_u232_set_line_ctrl(struct usb_serial_port *port, + unsigned char lcr) { int rc; unsigned char *buf; @@ -273,20 +272,19 @@ static int mct_u232_set_line_ctrl(struct usb_serial *serial, unsigned char lcr) return -ENOMEM; buf[0] = lcr; - rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), + rc = usb_control_msg(port->serial->dev, usb_sndctrlpipe(port->serial->dev, 0), MCT_U232_SET_LINE_CTRL_REQUEST, MCT_U232_SET_REQUEST_TYPE, 0, 0, buf, MCT_U232_SET_LINE_CTRL_SIZE, WDR_TIMEOUT); if (rc < 0) - dev_err(&serial->dev->dev, - "Set LINE CTRL 0x%x failed (error = %d)\n", lcr, rc); - dbg("set_line_ctrl: 0x%x", lcr); + dev_err(&port->dev, "Set LINE CTRL 0x%x failed (error = %d)\n", lcr, rc); + dev_dbg(&port->dev, "set_line_ctrl: 0x%x\n", lcr); kfree(buf); return rc; } /* mct_u232_set_line_ctrl */ -static int mct_u232_set_modem_ctrl(struct usb_serial *serial, +static int mct_u232_set_modem_ctrl(struct usb_serial_port *port, unsigned int control_state) { int rc; @@ -304,25 +302,24 @@ static int mct_u232_set_modem_ctrl(struct usb_serial *serial, mcr |= MCT_U232_MCR_RTS; buf[0] = mcr; - rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), + rc = usb_control_msg(port->serial->dev, usb_sndctrlpipe(port->serial->dev, 0), MCT_U232_SET_MODEM_CTRL_REQUEST, MCT_U232_SET_REQUEST_TYPE, 0, 0, buf, MCT_U232_SET_MODEM_CTRL_SIZE, WDR_TIMEOUT); kfree(buf); - dbg("set_modem_ctrl: state=0x%x ==> mcr=0x%x", control_state, mcr); + dev_dbg(&port->dev, "set_modem_ctrl: state=0x%x ==> mcr=0x%x\n", control_state, mcr); if (rc < 0) { - dev_err(&serial->dev->dev, - "Set MODEM CTRL 0x%x failed (error = %d)\n", mcr, rc); + dev_err(&port->dev, "Set MODEM CTRL 0x%x failed (error = %d)\n", mcr, rc); return rc; } return 0; } /* mct_u232_set_modem_ctrl */ -static int mct_u232_get_modem_stat(struct usb_serial *serial, - unsigned char *msr) +static int mct_u232_get_modem_stat(struct usb_serial_port *port, + unsigned char *msr) { int rc; unsigned char *buf; @@ -332,19 +329,18 @@ static int mct_u232_get_modem_stat(struct usb_serial *serial, *msr = 0; return -ENOMEM; } - rc = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), + rc = usb_control_msg(port->serial->dev, usb_rcvctrlpipe(port->serial->dev, 0), MCT_U232_GET_MODEM_STAT_REQUEST, MCT_U232_GET_REQUEST_TYPE, 0, 0, buf, MCT_U232_GET_MODEM_STAT_SIZE, WDR_TIMEOUT); if (rc < 0) { - dev_err(&serial->dev->dev, - "Get MODEM STATus failed (error = %d)\n", rc); + dev_err(&port->dev, "Get MODEM STATus failed (error = %d)\n", rc); *msr = 0; } else { *msr = buf[0]; } - dbg("get_modem_stat: 0x%x", *msr); + dev_dbg(&port->dev, "get_modem_stat: 0x%x\n", *msr); kfree(buf); return rc; } /* mct_u232_get_modem_stat */ @@ -363,8 +359,8 @@ static void mct_u232_msr_to_icount(struct async_icount *icount, icount->dcd++; } /* mct_u232_msr_to_icount */ -static void mct_u232_msr_to_state(unsigned int *control_state, - unsigned char msr) +static void mct_u232_msr_to_state(struct usb_serial_port *port, + unsigned int *control_state, unsigned char msr) { /* Translate Control Line states */ if (msr & MCT_U232_MSR_DSR) @@ -383,7 +379,7 @@ static void mct_u232_msr_to_state(unsigned int *control_state, *control_state |= TIOCM_CD; else *control_state &= ~TIOCM_CD; - dbg("msr_to_state: msr=0x%x ==> state=0x%x", msr, *control_state); + dev_dbg(&port->dev, "msr_to_state: msr=0x%x ==> state=0x%x\n", msr, *control_state); } /* mct_u232_msr_to_state */ /* @@ -465,14 +461,14 @@ static int mct_u232_open(struct tty_struct *tty, struct usb_serial_port *port) control_state = priv->control_state; last_lcr = priv->last_lcr; spin_unlock_irqrestore(&priv->lock, flags); - mct_u232_set_modem_ctrl(serial, control_state); - mct_u232_set_line_ctrl(serial, last_lcr); + mct_u232_set_modem_ctrl(port, control_state); + mct_u232_set_line_ctrl(port, last_lcr); /* Read modem status and update control state */ - mct_u232_get_modem_stat(serial, &last_msr); + mct_u232_get_modem_stat(port, &last_msr); spin_lock_irqsave(&priv->lock, flags); priv->last_msr = last_msr; - mct_u232_msr_to_state(&priv->control_state, priv->last_msr); + mct_u232_msr_to_state(port, &priv->control_state, priv->last_msr); spin_unlock_irqrestore(&priv->lock, flags); retval = usb_submit_urb(port->read_urb, GFP_KERNEL); @@ -512,7 +508,7 @@ static void mct_u232_dtr_rts(struct usb_serial_port *port, int on) priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS); control_state = priv->control_state; spin_unlock_irq(&priv->lock); - mct_u232_set_modem_ctrl(port->serial, control_state); + mct_u232_set_modem_ctrl(port, control_state); } mutex_unlock(&port->serial->disc_mutex); } @@ -532,7 +528,6 @@ static void mct_u232_read_int_callback(struct urb *urb) { struct usb_serial_port *port = urb->context; struct mct_u232_private *priv = usb_get_serial_port_data(port); - struct usb_serial *serial = port->serial; struct tty_struct *tty; unsigned char *data = urb->transfer_buffer; int retval; @@ -547,22 +542,16 @@ static void mct_u232_read_int_callback(struct urb *urb) case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", - __func__, status); + dev_dbg(&port->dev, "%s - urb shutting down with status: %d\n", + __func__, status); return; default: - dbg("%s - nonzero urb status received: %d", - __func__, status); + dev_dbg(&port->dev, "%s - nonzero urb status received: %d\n", + __func__, status); goto exit; } - if (!serial) { - dbg("%s - bad serial pointer, exiting", __func__); - return; - } - - usb_serial_debug_data(debug, &port->dev, __func__, - urb->actual_length, data); + usb_serial_debug_data(&port->dev, __func__, urb->actual_length, data); /* * Work-a-round: handle the 'usual' bulk-in pipe here @@ -588,7 +577,7 @@ static void mct_u232_read_int_callback(struct urb *urb) priv->last_msr = data[MCT_U232_MSR_INDEX]; /* Record Control Line states */ - mct_u232_msr_to_state(&priv->control_state, priv->last_msr); + mct_u232_msr_to_state(port, &priv->control_state, priv->last_msr); mct_u232_msr_to_icount(&priv->icount, priv->last_msr); @@ -656,18 +645,18 @@ static void mct_u232_set_termios(struct tty_struct *tty, /* reassert DTR and RTS on transition from B0 */ if ((old_cflag & CBAUD) == B0) { - dbg("%s: baud was B0", __func__); + dev_dbg(&port->dev, "%s: baud was B0\n", __func__); control_state |= TIOCM_DTR | TIOCM_RTS; - mct_u232_set_modem_ctrl(serial, control_state); + mct_u232_set_modem_ctrl(port, control_state); } mct_u232_set_baud_rate(tty, serial, port, tty_get_baud_rate(tty)); if ((cflag & CBAUD) == B0) { - dbg("%s: baud is B0", __func__); + dev_dbg(&port->dev, "%s: baud is B0\n", __func__); /* Drop RTS and DTR */ control_state &= ~(TIOCM_DTR | TIOCM_RTS); - mct_u232_set_modem_ctrl(serial, control_state); + mct_u232_set_modem_ctrl(port, control_state); } /* @@ -704,7 +693,7 @@ static void mct_u232_set_termios(struct tty_struct *tty, last_lcr |= (cflag & CSTOPB) ? MCT_U232_STOP_BITS_2 : MCT_U232_STOP_BITS_1; - mct_u232_set_line_ctrl(serial, last_lcr); + mct_u232_set_line_ctrl(port, last_lcr); /* save off the modified port settings */ spin_lock_irqsave(&priv->lock, flags); @@ -716,7 +705,6 @@ static void mct_u232_set_termios(struct tty_struct *tty, static void mct_u232_break_ctl(struct tty_struct *tty, int break_state) { struct usb_serial_port *port = tty->driver_data; - struct usb_serial *serial = port->serial; struct mct_u232_private *priv = usb_get_serial_port_data(port); unsigned char lcr; unsigned long flags; @@ -728,7 +716,7 @@ static void mct_u232_break_ctl(struct tty_struct *tty, int break_state) lcr |= MCT_U232_SET_BREAK; spin_unlock_irqrestore(&priv->lock, flags); - mct_u232_set_line_ctrl(serial, lcr); + mct_u232_set_line_ctrl(port, lcr); } /* mct_u232_break_ctl */ @@ -750,7 +738,6 @@ static int mct_u232_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; - struct usb_serial *serial = port->serial; struct mct_u232_private *priv = usb_get_serial_port_data(port); unsigned int control_state; unsigned long flags; @@ -769,7 +756,7 @@ static int mct_u232_tiocmset(struct tty_struct *tty, priv->control_state = control_state; spin_unlock_irqrestore(&priv->lock, flags); - return mct_u232_set_modem_ctrl(serial, control_state); + return mct_u232_set_modem_ctrl(port, control_state); } static void mct_u232_throttle(struct tty_struct *tty) @@ -784,7 +771,7 @@ static void mct_u232_throttle(struct tty_struct *tty) priv->control_state &= ~TIOCM_RTS; control_state = priv->control_state; spin_unlock_irq(&priv->lock); - (void) mct_u232_set_modem_ctrl(port->serial, control_state); + mct_u232_set_modem_ctrl(port, control_state); } else { spin_unlock_irq(&priv->lock); } @@ -802,7 +789,7 @@ static void mct_u232_unthrottle(struct tty_struct *tty) priv->control_state |= TIOCM_RTS; control_state = priv->control_state; spin_unlock_irq(&priv->lock); - (void) mct_u232_set_modem_ctrl(port->serial, control_state); + mct_u232_set_modem_ctrl(port, control_state); } else { spin_unlock_irq(&priv->lock); } @@ -817,13 +804,13 @@ static int mct_u232_ioctl(struct tty_struct *tty, struct async_icount cnow, cprev; unsigned long flags; - dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd); + dev_dbg(&port->dev, "%s - cmd = 0x%x\n", __func__, cmd); switch (cmd) { case TIOCMIWAIT: - dbg("%s (%d) TIOCMIWAIT", __func__, port->number); + dev_dbg(&port->dev, "%s TIOCMIWAIT", __func__); spin_lock_irqsave(&mct_u232_port->lock, flags); cprev = mct_u232_port->icount; @@ -879,8 +866,8 @@ static int mct_u232_get_icount(struct tty_struct *tty, spin_unlock_irqrestore(&mct_u232_port->lock, flags); - dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d", - __func__, port->number, icount->rx, icount->tx); + dev_dbg(&port->dev, "%s TIOCGICOUNT RX=%d, TX=%d\n", + __func__, icount->rx, icount->tx); return 0; } @@ -889,6 +876,3 @@ module_usb_serial_driver(serial_drivers, id_table); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); diff --git a/drivers/usb/serial/metro-usb.c b/drivers/usb/serial/metro-usb.c index 2b0627b5fe2c..0b257ddffbdb 100644 --- a/drivers/usb/serial/metro-usb.c +++ b/drivers/usb/serial/metro-usb.c @@ -52,9 +52,6 @@ static struct usb_device_id id_table[] = { }; MODULE_DEVICE_TABLE(usb, id_table); -/* Input parameter constants. */ -static bool debug; - /* UNI-Directional mode commands for device configure */ #define UNI_CMD_OPEN 0x80 #define UNI_CMD_CLOSE 0xFF @@ -436,7 +433,3 @@ MODULE_LICENSE("GPL"); MODULE_AUTHOR("Philip Nicastro"); MODULE_AUTHOR("Aleksey Babahin <tamerlan311@gmail.com>"); MODULE_DESCRIPTION(DRIVER_DESC); - -/* Module input parameters */ -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Print debug info (bool 1=on, 0=off)"); diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index 012f67b2e4cc..1bf1ad066666 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -71,8 +71,6 @@ struct moschip_port { struct urb *write_urb_pool[NUM_URBS]; }; -static bool debug; - static struct usb_serial_driver moschip7720_2port_driver; #define USB_VENDOR_ID_MOSCHIP 0x9710 @@ -281,16 +279,19 @@ static void send_deferred_urbs(unsigned long _mos_parport) int ret_val; unsigned long flags; struct mos7715_parport *mos_parport = (void *)_mos_parport; - struct urbtracker *urbtrack; + struct urbtracker *urbtrack, *tmp; struct list_head *cursor, *next; + struct device *dev; /* if release function ran, game over */ if (unlikely(mos_parport->serial == NULL)) return; + dev = &mos_parport->serial->dev->dev; + /* try again to get the mutex */ if (!mutex_trylock(&mos_parport->serial->disc_mutex)) { - dbg("%s: rescheduling tasklet", __func__); + dev_dbg(dev, "%s: rescheduling tasklet\n", __func__); tasklet_schedule(&mos_parport->urb_tasklet); return; } @@ -305,20 +306,19 @@ static void send_deferred_urbs(unsigned long _mos_parport) if (list_empty(&mos_parport->deferred_urbs)) { spin_unlock_irqrestore(&mos_parport->listlock, flags); mutex_unlock(&mos_parport->serial->disc_mutex); - dbg("%s: deferred_urbs list empty", __func__); + dev_dbg(dev, "%s: deferred_urbs list empty\n", __func__); return; } /* move contents of deferred_urbs list to active_urbs list and submit */ list_for_each_safe(cursor, next, &mos_parport->deferred_urbs) list_move_tail(cursor, &mos_parport->active_urbs); - list_for_each_entry(urbtrack, &mos_parport->active_urbs, + list_for_each_entry_safe(urbtrack, tmp, &mos_parport->active_urbs, urblist_entry) { ret_val = usb_submit_urb(urbtrack->urb, GFP_ATOMIC); - dbg("%s: urb submitted", __func__); + dev_dbg(dev, "%s: urb submitted\n", __func__); if (ret_val) { - dev_err(&mos_parport->serial->dev->dev, - "usb_submit_urb() failed: %d", ret_val); + dev_err(dev, "usb_submit_urb() failed: %d\n", ret_val); list_del(&urbtrack->urblist_entry); kref_put(&urbtrack->ref_count, destroy_urbtracker); } @@ -334,7 +334,7 @@ static void async_complete(struct urb *urb) int status = urb->status; if (unlikely(status)) - dbg("%s - nonzero urb status received: %d", __func__, status); + dev_dbg(&urb->dev->dev, "%s - nonzero urb status received: %d\n", __func__, status); /* remove the urbtracker from the active_urbs list */ spin_lock(&urbtrack->mos_parport->listlock); @@ -389,7 +389,7 @@ static int write_parport_reg_nonblock(struct mos7715_parport *mos_parport, &mos_parport->deferred_urbs); spin_unlock_irqrestore(&mos_parport->listlock, flags); tasklet_schedule(&mos_parport->urb_tasklet); - dbg("tasklet scheduled"); + dev_dbg(&usbdev->dev, "tasklet scheduled"); return 0; } @@ -690,7 +690,7 @@ static int mos7715_parport_init(struct usb_serial *serial) /* allocate and initialize parallel port control struct */ mos_parport = kzalloc(sizeof(struct mos7715_parport), GFP_KERNEL); if (mos_parport == NULL) { - dbg("mos7715_parport_init: kzalloc failed"); + dev_dbg(&serial->dev->dev, "%s: kzalloc failed\n", __func__); return -ENOMEM; } mos_parport->msg_pending = false; @@ -743,6 +743,7 @@ static void mos7720_interrupt_callback(struct urb *urb) int result; int length; int status = urb->status; + struct device *dev = &urb->dev->dev; __u8 *data; __u8 sp1; __u8 sp2; @@ -755,12 +756,10 @@ static void mos7720_interrupt_callback(struct urb *urb) case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", __func__, - status); + dev_dbg(dev, "%s - urb shutting down with status: %d\n", __func__, status); return; default: - dbg("%s - nonzero urb status received: %d", __func__, - status); + dev_dbg(dev, "%s - nonzero urb status received: %d\n", __func__, status); goto exit; } @@ -777,7 +776,7 @@ static void mos7720_interrupt_callback(struct urb *urb) * oneukum 2007-03-14 */ if (unlikely(length != 4)) { - dbg("Wrong data !!!"); + dev_dbg(dev, "Wrong data !!!\n"); return; } @@ -786,31 +785,29 @@ static void mos7720_interrupt_callback(struct urb *urb) if ((sp1 | sp2) & 0x01) { /* No Interrupt Pending in both the ports */ - dbg("No Interrupt !!!"); + dev_dbg(dev, "No Interrupt !!!\n"); } else { switch (sp1 & 0x0f) { case SERIAL_IIR_RLS: - dbg("Serial Port 1: Receiver status error or address " - "bit detected in 9-bit mode\n"); + dev_dbg(dev, "Serial Port 1: Receiver status error or address bit detected in 9-bit mode\n"); break; case SERIAL_IIR_CTI: - dbg("Serial Port 1: Receiver time out"); + dev_dbg(dev, "Serial Port 1: Receiver time out\n"); break; case SERIAL_IIR_MS: - /* dbg("Serial Port 1: Modem status change"); */ + /* dev_dbg(dev, "Serial Port 1: Modem status change\n"); */ break; } switch (sp2 & 0x0f) { case SERIAL_IIR_RLS: - dbg("Serial Port 2: Receiver status error or address " - "bit detected in 9-bit mode"); + dev_dbg(dev, "Serial Port 2: Receiver status error or address bit detected in 9-bit mode\n"); break; case SERIAL_IIR_CTI: - dbg("Serial Port 2: Receiver time out"); + dev_dbg(dev, "Serial Port 2: Receiver time out\n"); break; case SERIAL_IIR_MS: - /* dbg("Serial Port 2: Modem status change"); */ + /* dev_dbg(dev, "Serial Port 2: Modem status change\n"); */ break; } } @@ -818,9 +815,7 @@ static void mos7720_interrupt_callback(struct urb *urb) exit: result = usb_submit_urb(urb, GFP_ATOMIC); if (result) - dev_err(&urb->dev->dev, - "%s - Error %d submitting control urb\n", - __func__, result); + dev_err(dev, "%s - Error %d submitting control urb\n", __func__, result); } /* @@ -833,6 +828,7 @@ static void mos7715_interrupt_callback(struct urb *urb) int result; int length; int status = urb->status; + struct device *dev = &urb->dev->dev; __u8 *data; __u8 iir; @@ -845,12 +841,10 @@ static void mos7715_interrupt_callback(struct urb *urb) case -ESHUTDOWN: case -ENODEV: /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", __func__, - status); + dev_dbg(dev, "%s - urb shutting down with status: %d\n", __func__, status); return; default: - dbg("%s - nonzero urb status received: %d", __func__, - status); + dev_dbg(dev, "%s - nonzero urb status received: %d\n", __func__, status); goto exit; } @@ -864,7 +858,7 @@ static void mos7715_interrupt_callback(struct urb *urb) * Byte 4: FIFO status for both */ if (unlikely(length != 4)) { - dbg("Wrong data !!!"); + dev_dbg(dev, "Wrong data !!!\n"); return; } @@ -872,14 +866,13 @@ static void mos7715_interrupt_callback(struct urb *urb) if (!(iir & 0x01)) { /* serial port interrupt pending */ switch (iir & 0x0f) { case SERIAL_IIR_RLS: - dbg("Serial Port: Receiver status error or address " - "bit detected in 9-bit mode\n"); + dev_dbg(dev, "Serial Port: Receiver status error or address bit detected in 9-bit mode\n\n"); break; case SERIAL_IIR_CTI: - dbg("Serial Port: Receiver time out"); + dev_dbg(dev, "Serial Port: Receiver time out\n"); break; case SERIAL_IIR_MS: - /* dbg("Serial Port: Modem status change"); */ + /* dev_dbg(dev, "Serial Port: Modem status change\n"); */ break; } } @@ -897,9 +890,7 @@ static void mos7715_interrupt_callback(struct urb *urb) exit: result = usb_submit_urb(urb, GFP_ATOMIC); if (result) - dev_err(&urb->dev->dev, - "%s - Error %d submitting control urb\n", - __func__, result); + dev_err(dev, "%s - Error %d submitting control urb\n", __func__, result); } /* @@ -916,13 +907,13 @@ static void mos7720_bulk_in_callback(struct urb *urb) int status = urb->status; if (status) { - dbg("nonzero read bulk status received: %d", status); + dev_dbg(&urb->dev->dev, "nonzero read bulk status received: %d\n", status); return; } port = urb->context; - dbg("Entering...%s", __func__); + dev_dbg(&port->dev, "Entering...%s\n", __func__); data = urb->transfer_buffer; @@ -936,8 +927,7 @@ static void mos7720_bulk_in_callback(struct urb *urb) if (port->read_urb->status != -EINPROGRESS) { retval = usb_submit_urb(port->read_urb, GFP_ATOMIC); if (retval) - dbg("usb_submit_urb(read bulk) failed, retval = %d", - retval); + dev_dbg(&port->dev, "usb_submit_urb(read bulk) failed, retval = %d\n", retval); } } @@ -953,13 +943,13 @@ static void mos7720_bulk_out_data_callback(struct urb *urb) int status = urb->status; if (status) { - dbg("nonzero write bulk status received:%d", status); + dev_dbg(&urb->dev->dev, "nonzero write bulk status received:%d\n", status); return; } mos7720_port = urb->context; if (!mos7720_port) { - dbg("NULL mos7720_port pointer"); + dev_dbg(&urb->dev->dev, "NULL mos7720_port pointer\n"); return ; } @@ -1061,9 +1051,7 @@ static int mos7720_open(struct tty_struct *tty, struct usb_serial_port *port) port_number = port->number - port->serial->minor; read_mos_reg(serial, port_number, LSR, &data); - dbg("SS::%p LSR:%x", mos7720_port, data); - - dbg("Check:Sending Command .........."); + dev_dbg(&port->dev, "SS::%p LSR:%x\n", mos7720_port, data); write_mos_reg(serial, dummy, SP1_REG, 0x02); write_mos_reg(serial, dummy, SP2_REG, 0x02); @@ -1122,20 +1110,16 @@ static int mos7720_chars_in_buffer(struct tty_struct *tty) int chars = 0; struct moschip_port *mos7720_port; - dbg("%s:entering ...........", __func__); - mos7720_port = usb_get_serial_port_data(port); - if (mos7720_port == NULL) { - dbg("%s:leaving ...........", __func__); + if (mos7720_port == NULL) return 0; - } for (i = 0; i < NUM_URBS; ++i) { if (mos7720_port->write_urb_pool[i] && mos7720_port->write_urb_pool[i]->status == -EINPROGRESS) chars += URB_TRANSFER_BUFFER_SIZE; } - dbg("%s - returns %d", __func__, chars); + dev_dbg(&port->dev, "%s - returns %d\n", __func__, chars); return chars; } @@ -1145,8 +1129,6 @@ static void mos7720_close(struct usb_serial_port *port) struct moschip_port *mos7720_port; int j; - dbg("mos7720_close:entering..."); - serial = port->serial; mos7720_port = usb_get_serial_port_data(port); @@ -1166,9 +1148,7 @@ static void mos7720_close(struct usb_serial_port *port) /* While closing port, shutdown all bulk read, write * * and interrupt read if they exists, otherwise nop */ - dbg("Shutdown bulk write"); usb_kill_urb(port->write_urb); - dbg("Shutdown bulk read"); usb_kill_urb(port->read_urb); mutex_lock(&serial->disc_mutex); @@ -1182,8 +1162,6 @@ static void mos7720_close(struct usb_serial_port *port) } mutex_unlock(&serial->disc_mutex); mos7720_port->open = 0; - - dbg("Leaving %s", __func__); } static void mos7720_break(struct tty_struct *tty, int break_state) @@ -1193,8 +1171,6 @@ static void mos7720_break(struct tty_struct *tty, int break_state) struct usb_serial *serial; struct moschip_port *mos7720_port; - dbg("Entering %s", __func__); - serial = port->serial; mos7720_port = usb_get_serial_port_data(port); @@ -1225,13 +1201,9 @@ static int mos7720_write_room(struct tty_struct *tty) int room = 0; int i; - dbg("%s:entering ...........", __func__); - mos7720_port = usb_get_serial_port_data(port); - if (mos7720_port == NULL) { - dbg("%s:leaving ...........", __func__); + if (mos7720_port == NULL) return -ENODEV; - } /* FIXME: Locking */ for (i = 0; i < NUM_URBS; ++i) { @@ -1240,7 +1212,7 @@ static int mos7720_write_room(struct tty_struct *tty) room += URB_TRANSFER_BUFFER_SIZE; } - dbg("%s - returns %d", __func__, room); + dev_dbg(&port->dev, "%s - returns %d\n", __func__, room); return room; } @@ -1257,15 +1229,11 @@ static int mos7720_write(struct tty_struct *tty, struct usb_serial_port *port, struct urb *urb; const unsigned char *current_position = data; - dbg("%s:entering ...........", __func__); - serial = port->serial; mos7720_port = usb_get_serial_port_data(port); - if (mos7720_port == NULL) { - dbg("mos7720_port is NULL"); + if (mos7720_port == NULL) return -ENODEV; - } /* try to find a free urb in the list */ urb = NULL; @@ -1274,13 +1242,13 @@ static int mos7720_write(struct tty_struct *tty, struct usb_serial_port *port, if (mos7720_port->write_urb_pool[i] && mos7720_port->write_urb_pool[i]->status != -EINPROGRESS) { urb = mos7720_port->write_urb_pool[i]; - dbg("URB:%d", i); + dev_dbg(&port->dev, "URB:%d\n", i); break; } } if (urb == NULL) { - dbg("%s - no more free urbs", __func__); + dev_dbg(&port->dev, "%s - no more free urbs\n", __func__); goto exit; } @@ -1296,7 +1264,7 @@ static int mos7720_write(struct tty_struct *tty, struct usb_serial_port *port, transfer_size = min(count, URB_TRANSFER_BUFFER_SIZE); memcpy(urb->transfer_buffer, current_position, transfer_size); - usb_serial_debug_data(debug, &port->dev, __func__, transfer_size, + usb_serial_debug_data(&port->dev, __func__, transfer_size, urb->transfer_buffer); /* fill urb with data and submit */ @@ -1326,20 +1294,16 @@ static void mos7720_throttle(struct tty_struct *tty) struct moschip_port *mos7720_port; int status; - dbg("%s- port %d", __func__, port->number); - mos7720_port = usb_get_serial_port_data(port); if (mos7720_port == NULL) return; if (!mos7720_port->open) { - dbg("port not opened"); + dev_dbg(&port->dev, "%s - port not opened\n", __func__); return; } - dbg("%s: Entering ..........", __func__); - /* if we are implementing XON/XOFF, send the stop character */ if (I_IXOFF(tty)) { unsigned char stop_char = STOP_CHAR(tty); @@ -1368,12 +1332,10 @@ static void mos7720_unthrottle(struct tty_struct *tty) return; if (!mos7720_port->open) { - dbg("%s - port not opened", __func__); + dev_dbg(&port->dev, "%s - port not opened\n", __func__); return; } - dbg("%s: Entering ..........", __func__); - /* if we are implementing XON/XOFF, send the start character */ if (I_IXOFF(tty)) { unsigned char start_char = START_CHAR(tty); @@ -1409,7 +1371,7 @@ static int set_higher_rates(struct moschip_port *mos7720_port, /*********************************************** * Init Sequence for higher rates ***********************************************/ - dbg("Sending Setting Commands .........."); + dev_dbg(&port->dev, "Sending Setting Commands ..........\n"); port_number = port->number - port->serial->minor; write_mos_reg(serial, port_number, IER, 0x00); @@ -1478,7 +1440,7 @@ static struct divisor_table_entry divisor_table[] = { * this function calculates the proper baud rate divisor for the specified * baud rate. *****************************************************************************/ -static int calc_baud_rate_divisor(int baudrate, int *divisor) +static int calc_baud_rate_divisor(struct usb_serial_port *port, int baudrate, int *divisor) { int i; __u16 custom; @@ -1486,7 +1448,7 @@ static int calc_baud_rate_divisor(int baudrate, int *divisor) __u16 round; - dbg("%s - %d", __func__, baudrate); + dev_dbg(&port->dev, "%s - %d\n", __func__, baudrate); for (i = 0; i < ARRAY_SIZE(divisor_table); i++) { if (divisor_table[i].baudrate == baudrate) { @@ -1508,11 +1470,11 @@ static int calc_baud_rate_divisor(int baudrate, int *divisor) custom++; *divisor = custom; - dbg("Baud %d = %d", baudrate, custom); + dev_dbg(&port->dev, "Baud %d = %d\n", baudrate, custom); return 0; } - dbg("Baud calculation Failed..."); + dev_dbg(&port->dev, "Baud calculation Failed...\n"); return -EINVAL; } @@ -1536,13 +1498,11 @@ static int send_cmd_write_baud_rate(struct moschip_port *mos7720_port, port = mos7720_port->port; serial = port->serial; - dbg("%s: Entering ..........", __func__); - number = port->number - port->serial->minor; - dbg("%s - port = %d, baud = %d", __func__, port->number, baudrate); + dev_dbg(&port->dev, "%s - baud = %d\n", __func__, baudrate); /* Calculate the Divisor */ - status = calc_baud_rate_divisor(baudrate, &divisor); + status = calc_baud_rate_divisor(port, baudrate, &divisor); if (status) { dev_err(&port->dev, "%s - bad baud rate\n", __func__); return status; @@ -1591,15 +1551,11 @@ static void change_port_settings(struct tty_struct *tty, serial = port->serial; port_number = port->number - port->serial->minor; - dbg("%s - port %d", __func__, port->number); - if (!mos7720_port->open) { - dbg("%s - port not opened", __func__); + dev_dbg(&port->dev, "%s - port not opened\n", __func__); return; } - dbg("%s: Entering ..........", __func__); - lData = UART_LCR_WLEN8; lStop = 0x00; /* 1 stop bit */ lParity = 0x00; /* No parity */ @@ -1633,14 +1589,14 @@ static void change_port_settings(struct tty_struct *tty, if (cflag & PARENB) { if (cflag & PARODD) { lParity = UART_LCR_PARITY; - dbg("%s - parity = odd", __func__); + dev_dbg(&port->dev, "%s - parity = odd\n", __func__); } else { lParity = (UART_LCR_EPAR | UART_LCR_PARITY); - dbg("%s - parity = even", __func__); + dev_dbg(&port->dev, "%s - parity = even\n", __func__); } } else { - dbg("%s - parity = none", __func__); + dev_dbg(&port->dev, "%s - parity = none\n", __func__); } if (cflag & CMSPAR) @@ -1649,10 +1605,10 @@ static void change_port_settings(struct tty_struct *tty, /* Change the Stop bit */ if (cflag & CSTOPB) { lStop = UART_LCR_STOP; - dbg("%s - stop bits = 2", __func__); + dev_dbg(&port->dev, "%s - stop bits = 2\n", __func__); } else { lStop = 0x00; - dbg("%s - stop bits = 1", __func__); + dev_dbg(&port->dev, "%s - stop bits = 1\n", __func__); } #define LCR_BITS_MASK 0x03 /* Mask for bits/char field */ @@ -1698,7 +1654,7 @@ static void change_port_settings(struct tty_struct *tty, baud = tty_get_baud_rate(tty); if (!baud) { /* pick a default, any default... */ - dbg("Picked default baud..."); + dev_dbg(&port->dev, "Picked default baud...\n"); baud = 9600; } @@ -1709,7 +1665,7 @@ static void change_port_settings(struct tty_struct *tty, return; } - dbg("%s - baud rate = %d", __func__, baud); + dev_dbg(&port->dev, "%s - baud rate = %d\n", __func__, baud); status = send_cmd_write_baud_rate(mos7720_port, baud); /* FIXME: needs to write actual resulting baud back not just blindly do so */ @@ -1721,8 +1677,7 @@ static void change_port_settings(struct tty_struct *tty, if (port->read_urb->status != -EINPROGRESS) { status = usb_submit_urb(port->read_urb, GFP_ATOMIC); if (status) - dbg("usb_submit_urb(read bulk) failed, status = %d", - status); + dev_dbg(&port->dev, "usb_submit_urb(read bulk) failed, status = %d\n", status); } } @@ -1747,23 +1702,19 @@ static void mos7720_set_termios(struct tty_struct *tty, return; if (!mos7720_port->open) { - dbg("%s - port not opened", __func__); + dev_dbg(&port->dev, "%s - port not opened\n", __func__); return; } - dbg("%s\n", "setting termios - ASPIRE"); + dev_dbg(&port->dev, "setting termios - ASPIRE\n"); cflag = tty->termios.c_cflag; - dbg("%s - cflag %08x iflag %08x", __func__, - tty->termios.c_cflag, - RELEVANT_IFLAG(tty->termios.c_iflag)); + dev_dbg(&port->dev, "%s - cflag %08x iflag %08x\n", __func__, + tty->termios.c_cflag, RELEVANT_IFLAG(tty->termios.c_iflag)); - dbg("%s - old cflag %08x old iflag %08x", __func__, - old_termios->c_cflag, - RELEVANT_IFLAG(old_termios->c_iflag)); - - dbg("%s - port %d", __func__, port->number); + dev_dbg(&port->dev, "%s - old cflag %08x old iflag %08x\n", __func__, + old_termios->c_cflag, RELEVANT_IFLAG(old_termios->c_iflag)); /* change the port settings to the new ones specified */ change_port_settings(tty, mos7720_port, old_termios); @@ -1771,8 +1722,7 @@ static void mos7720_set_termios(struct tty_struct *tty, if (port->read_urb->status != -EINPROGRESS) { status = usb_submit_urb(port->read_urb, GFP_ATOMIC); if (status) - dbg("usb_submit_urb(read bulk) failed, status = %d", - status); + dev_dbg(&port->dev, "usb_submit_urb(read bulk) failed, status = %d\n", status); } } @@ -1800,7 +1750,7 @@ static int get_lsr_info(struct tty_struct *tty, read_mos_reg(port->serial, port_number, LSR, &data); if ((data & (UART_LSR_TEMT | UART_LSR_THRE)) == (UART_LSR_TEMT | UART_LSR_THRE)) { - dbg("%s -- Empty", __func__); + dev_dbg(&port->dev, "%s -- Empty\n", __func__); result = TIOCSER_TEMT; } } @@ -1817,8 +1767,6 @@ static int mos7720_tiocmget(struct tty_struct *tty) unsigned int mcr ; unsigned int msr ; - dbg("%s - port %d", __func__, port->number); - mcr = mos7720_port->shadowMCR; msr = mos7720_port->shadowMSR; @@ -1829,8 +1777,6 @@ static int mos7720_tiocmget(struct tty_struct *tty) | ((msr & UART_MSR_RI) ? TIOCM_RI : 0) /* 0x080 */ | ((msr & UART_MSR_DSR) ? TIOCM_DSR : 0); /* 0x100 */ - dbg("%s -- %x", __func__, result); - return result; } @@ -1840,8 +1786,6 @@ static int mos7720_tiocmset(struct tty_struct *tty, struct usb_serial_port *port = tty->driver_data; struct moschip_port *mos7720_port = usb_get_serial_port_data(port); unsigned int mcr ; - dbg("%s - port %d", __func__, port->number); - dbg("he was at tiocmset"); mcr = mos7720_port->shadowMCR; @@ -1888,8 +1832,8 @@ static int mos7720_get_icount(struct tty_struct *tty, icount->brk = cnow.brk; icount->buf_overrun = cnow.buf_overrun; - dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d", __func__, - port->number, icount->rx, icount->tx); + dev_dbg(&port->dev, "%s TIOCGICOUNT RX=%d, TX=%d\n", __func__, + icount->rx, icount->tx); return 0; } @@ -1975,29 +1919,28 @@ static int mos7720_ioctl(struct tty_struct *tty, if (mos7720_port == NULL) return -ENODEV; - dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd); + dev_dbg(&port->dev, "%s - cmd = 0x%x", __func__, cmd); switch (cmd) { case TIOCSERGETLSR: - dbg("%s (%d) TIOCSERGETLSR", __func__, port->number); + dev_dbg(&port->dev, "%s TIOCSERGETLSR\n", __func__); return get_lsr_info(tty, mos7720_port, (unsigned int __user *)arg); /* FIXME: These should be using the mode methods */ case TIOCMBIS: case TIOCMBIC: - dbg("%s (%d) TIOCMSET/TIOCMBIC/TIOCMSET", - __func__, port->number); + dev_dbg(&port->dev, "%s TIOCMSET/TIOCMBIC/TIOCMSET\n", __func__); return set_modem_info(mos7720_port, cmd, (unsigned int __user *)arg); case TIOCGSERIAL: - dbg("%s (%d) TIOCGSERIAL", __func__, port->number); + dev_dbg(&port->dev, "%s TIOCGSERIAL\n", __func__); return get_serial_info(mos7720_port, (struct serial_struct __user *)arg); case TIOCMIWAIT: - dbg("%s (%d) TIOCMIWAIT", __func__, port->number); + dev_dbg(&port->dev, "%s TIOCMIWAIT\n", __func__); cprev = mos7720_port->icount; while (1) { if (signal_pending(current)) @@ -2030,13 +1973,6 @@ static int mos7720_startup(struct usb_serial *serial) u16 product; int ret_val; - dbg("%s: Entering ..........", __func__); - - if (!serial) { - dbg("Invalid Handler"); - return -ENODEV; - } - product = le16_to_cpu(serial->dev->descriptor.idProduct); dev = serial->dev; @@ -2081,8 +2017,8 @@ static int mos7720_startup(struct usb_serial *serial) mos7720_port->port = serial->port[i]; usb_set_serial_port_data(serial->port[i], mos7720_port); - dbg("port number is %d", serial->port[i]->number); - dbg("serial number is %d", serial->minor); + dev_dbg(&dev->dev, "port number is %d\n", serial->port[i]->number); + dev_dbg(&dev->dev, "serial number is %d\n", serial->minor); } @@ -2106,7 +2042,7 @@ static int mos7720_startup(struct usb_serial *serial) #endif /* LSR For Port 1 */ read_mos_reg(serial, 0, LSR, &data); - dbg("LSR:%x", data); + dev_dbg(&dev->dev, "LSR:%x\n", data); return 0; } @@ -2195,6 +2131,3 @@ module_usb_serial_driver(serial_drivers, id_table); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 402c32d7accb..d6d4eeca8c68 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -252,8 +252,6 @@ struct moschip_port { struct timer_list led_timer2; /* Timer for LED off */ }; -static bool debug; - /* * mos7840_set_reg_sync * To set the Control register by calling usb_fill_control_urb function @@ -265,7 +263,7 @@ static int mos7840_set_reg_sync(struct usb_serial_port *port, __u16 reg, { struct usb_device *dev = port->serial->dev; val = val & 0x00ff; - dbg("mos7840_set_reg_sync offset is %x, value %x", reg, val); + dev_dbg(&port->dev, "mos7840_set_reg_sync offset is %x, value %x\n", reg, val); return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), MCS_WRREQ, MCS_WR_RTYPE, val, reg, NULL, 0, @@ -293,7 +291,7 @@ static int mos7840_get_reg_sync(struct usb_serial_port *port, __u16 reg, MCS_RD_RTYPE, 0, reg, buf, VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT); *val = buf[0]; - dbg("mos7840_get_reg_sync offset is %x, return val %x", reg, *val); + dev_dbg(&port->dev, "%s offset is %x, return val %x\n", __func__, reg, *val); kfree(buf); return ret; @@ -316,21 +314,16 @@ static int mos7840_set_uart_reg(struct usb_serial_port *port, __u16 reg, if (port->serial->num_ports == 4) { val |= (((__u16) port->number - (__u16) (port->serial->minor)) + 1) << 8; - dbg("mos7840_set_uart_reg application number is %x", val); } else { if (((__u16) port->number - (__u16) (port->serial->minor)) == 0) { val |= (((__u16) port->number - (__u16) (port->serial->minor)) + 1) << 8; - dbg("mos7840_set_uart_reg application number is %x", - val); } else { - val |= - (((__u16) port->number - + val |= (((__u16) port->number - (__u16) (port->serial->minor)) + 2) << 8; - dbg("mos7840_set_uart_reg application number is %x", - val); } } + dev_dbg(&port->dev, "%s application number is %x\n", __func__, val); return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), MCS_WRREQ, MCS_WR_RTYPE, val, reg, NULL, 0, MOS_WDR_TIMEOUT); @@ -354,27 +347,21 @@ static int mos7840_get_uart_reg(struct usb_serial_port *port, __u16 reg, if (!buf) return -ENOMEM; - /* dbg("application number is %4x", - (((__u16)port->number - (__u16)(port->serial->minor))+1)<<8); */ /* Wval is same as application number */ if (port->serial->num_ports == 4) { Wval = (((__u16) port->number - (__u16) (port->serial->minor)) + 1) << 8; - dbg("mos7840_get_uart_reg application number is %x", Wval); } else { if (((__u16) port->number - (__u16) (port->serial->minor)) == 0) { Wval = (((__u16) port->number - (__u16) (port->serial->minor)) + 1) << 8; - dbg("mos7840_get_uart_reg application number is %x", - Wval); } else { Wval = (((__u16) port->number - (__u16) (port->serial->minor)) + 2) << 8; - dbg("mos7840_get_uart_reg application number is %x", - Wval); } } + dev_dbg(&port->dev, "%s application number is %x\n", __func__, Wval); ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), MCS_RDREQ, MCS_RD_RTYPE, Wval, reg, buf, VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT); @@ -384,14 +371,13 @@ static int mos7840_get_uart_reg(struct usb_serial_port *port, __u16 reg, return ret; } -static void mos7840_dump_serial_port(struct moschip_port *mos7840_port) +static void mos7840_dump_serial_port(struct usb_serial_port *port, + struct moschip_port *mos7840_port) { - dbg("***************************************"); - dbg("SpRegOffset is %2x", mos7840_port->SpRegOffset); - dbg("ControlRegOffset is %2x", mos7840_port->ControlRegOffset); - dbg("DCRRegOffset is %2x", mos7840_port->DcrRegOffset); - dbg("***************************************"); + dev_dbg(&port->dev, "SpRegOffset is %2x\n", mos7840_port->SpRegOffset); + dev_dbg(&port->dev, "ControlRegOffset is %2x\n", mos7840_port->ControlRegOffset); + dev_dbg(&port->dev, "DCRRegOffset is %2x\n", mos7840_port->DcrRegOffset); } @@ -450,8 +436,6 @@ static void mos7840_handle_new_lsr(struct moschip_port *port, __u8 new_lsr) { struct async_icount *icount; - dbg("%s - %02x", __func__, new_lsr); - if (new_lsr & SERIAL_LSR_BI) { /* * Parity and Framing errors only count if they @@ -492,6 +476,7 @@ static void mos7840_control_callback(struct urb *urb) { unsigned char *data; struct moschip_port *mos7840_port; + struct device *dev = &urb->dev->dev; __u8 regval = 0x0; int result = 0; int status = urb->status; @@ -506,21 +491,19 @@ static void mos7840_control_callback(struct urb *urb) case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", __func__, - status); + dev_dbg(dev, "%s - urb shutting down with status: %d\n", __func__, status); return; default: - dbg("%s - nonzero urb status received: %d", __func__, - status); + dev_dbg(dev, "%s - nonzero urb status received: %d\n", __func__, status); goto exit; } - dbg("%s urb buffer size is %d", __func__, urb->actual_length); - dbg("%s mos7840_port->MsrLsr is %d port %d", __func__, - mos7840_port->MsrLsr, mos7840_port->port_num); + dev_dbg(dev, "%s urb buffer size is %d\n", __func__, urb->actual_length); + dev_dbg(dev, "%s mos7840_port->MsrLsr is %d port %d\n", __func__, + mos7840_port->MsrLsr, mos7840_port->port_num); data = urb->transfer_buffer; regval = (__u8) data[0]; - dbg("%s data is %x", __func__, regval); + dev_dbg(dev, "%s data is %x\n", __func__, regval); if (mos7840_port->MsrLsr == 0) mos7840_handle_new_msr(mos7840_port, regval); else if (mos7840_port->MsrLsr == 1) @@ -532,8 +515,7 @@ exit: result = usb_submit_urb(mos7840_port->int_urb, GFP_ATOMIC); spin_unlock(&mos7840_port->pool_lock); if (result) { - dev_err(&urb->dev->dev, - "%s - Error %d submitting interrupt urb\n", + dev_err(dev, "%s - Error %d submitting interrupt urb\n", __func__, result); } } @@ -570,12 +552,12 @@ static void mos7840_set_led_callback(struct urb *urb) case -ENOENT: case -ESHUTDOWN: /* This urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", __func__, - urb->status); + dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d", + __func__, urb->status); break; default: - dbg("%s - nonzero urb status received: %d", __func__, - urb->status); + dev_dbg(&urb->dev->dev, "%s - nonzero urb status received: %d", + __func__, urb->status); } } @@ -650,12 +632,12 @@ static void mos7840_interrupt_callback(struct urb *urb) case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", __func__, - status); + dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d\n", + __func__, status); return; default: - dbg("%s - nonzero urb status received: %d", __func__, - status); + dev_dbg(&urb->dev->dev, "%s - nonzero urb status received: %d\n", + __func__, status); goto exit; } @@ -672,7 +654,7 @@ static void mos7840_interrupt_callback(struct urb *urb) * Byte 5 FIFO status for both */ if (length && length > 5) { - dbg("%s", "Wrong data !!!"); + dev_dbg(&urb->dev->dev, "%s", "Wrong data !!!\n"); return; } @@ -689,17 +671,17 @@ static void mos7840_interrupt_callback(struct urb *urb) (__u16) (serial->minor)) + 1) << 8; if (mos7840_port->open) { if (sp[i] & 0x01) { - dbg("SP%d No Interrupt !!!", i); + dev_dbg(&urb->dev->dev, "SP%d No Interrupt !!!\n", i); } else { switch (sp[i] & 0x0f) { case SERIAL_IIR_RLS: - dbg("Serial Port %d: Receiver status error or ", i); - dbg("address bit detected in 9-bit mode"); + dev_dbg(&urb->dev->dev, "Serial Port %d: Receiver status error or \n", i); + dev_dbg(&urb->dev->dev, "address bit detected in 9-bit mode\n"); mos7840_port->MsrLsr = 1; wreg = LINE_STATUS_REGISTER; break; case SERIAL_IIR_MS: - dbg("Serial Port %d: Modem status change", i); + dev_dbg(&urb->dev->dev, "Serial Port %d: Modem status change\n", i); mos7840_port->MsrLsr = 0; wreg = MODEM_STATUS_REGISTER; break; @@ -731,11 +713,11 @@ static int mos7840_port_paranoia_check(struct usb_serial_port *port, const char *function) { if (!port) { - dbg("%s - port == NULL", function); + pr_debug("%s - port == NULL\n", function); return -1; } if (!port->serial) { - dbg("%s - port->serial == NULL", function); + pr_debug("%s - port->serial == NULL\n", function); return -1; } @@ -747,11 +729,11 @@ static int mos7840_serial_paranoia_check(struct usb_serial *serial, const char *function) { if (!serial) { - dbg("%s - serial == NULL", function); + pr_debug("%s - serial == NULL\n", function); return -1; } if (!serial->type) { - dbg("%s - serial->type == NULL!", function); + pr_debug("%s - serial->type == NULL!\n", function); return -1; } @@ -790,49 +772,44 @@ static void mos7840_bulk_in_callback(struct urb *urb) int status = urb->status; mos7840_port = urb->context; - if (!mos7840_port) { - dbg("%s", "NULL mos7840_port pointer"); + if (!mos7840_port) return; - } if (status) { - dbg("nonzero read bulk status received: %d", status); + dev_dbg(&urb->dev->dev, "nonzero read bulk status received: %d\n", status); mos7840_port->read_urb_busy = false; return; } - port = (struct usb_serial_port *)mos7840_port->port; + port = mos7840_port->port; if (mos7840_port_paranoia_check(port, __func__)) { - dbg("%s", "Port Paranoia failed"); mos7840_port->read_urb_busy = false; return; } serial = mos7840_get_usb_serial(port, __func__); if (!serial) { - dbg("%s", "Bad serial pointer"); mos7840_port->read_urb_busy = false; return; } data = urb->transfer_buffer; + usb_serial_debug_data(&port->dev, __func__, urb->actual_length, data); if (urb->actual_length) { tty = tty_port_tty_get(&mos7840_port->port->port); if (tty) { tty_insert_flip_string(tty, data, urb->actual_length); - dbg(" %s ", data); tty_flip_buffer_push(tty); tty_kref_put(tty); } mos7840_port->icount.rx += urb->actual_length; smp_wmb(); - dbg("mos7840_port->icount.rx is %d:", - mos7840_port->icount.rx); + dev_dbg(&port->dev, "mos7840_port->icount.rx is %d:\n", mos7840_port->icount.rx); } if (!mos7840_port->read_urb) { - dbg("%s", "URB KILLED !!!"); + dev_dbg(&port->dev, "%s", "URB KILLED !!!\n"); mos7840_port->read_urb_busy = false; return; } @@ -850,7 +827,7 @@ static void mos7840_bulk_in_callback(struct urb *urb) retval = usb_submit_urb(mos7840_port->read_urb, GFP_ATOMIC); if (retval) { - dbg("usb_submit_urb(read bulk) failed, retval = %d", retval); + dev_dbg(&port->dev, "usb_submit_urb(read bulk) failed, retval = %d\n", retval); mos7840_port->read_urb_busy = false; } } @@ -864,11 +841,13 @@ static void mos7840_bulk_in_callback(struct urb *urb) static void mos7840_bulk_out_data_callback(struct urb *urb) { struct moschip_port *mos7840_port; + struct usb_serial_port *port; struct tty_struct *tty; int status = urb->status; int i; mos7840_port = urb->context; + port = mos7840_port->port; spin_lock(&mos7840_port->pool_lock); for (i = 0; i < NUM_URBS; i++) { if (urb == mos7840_port->write_urb_pool[i]) { @@ -879,16 +858,14 @@ static void mos7840_bulk_out_data_callback(struct urb *urb) spin_unlock(&mos7840_port->pool_lock); if (status) { - dbg("nonzero write bulk status received:%d", status); + dev_dbg(&port->dev, "nonzero write bulk status received:%d\n", status); return; } - if (mos7840_port_paranoia_check(mos7840_port->port, __func__)) { - dbg("%s", "Port Paranoia failed"); + if (mos7840_port_paranoia_check(port, __func__)) return; - } - tty = tty_port_tty_get(&mos7840_port->port->port); + tty = tty_port_tty_get(&port->port); if (tty && mos7840_port->open) tty_wakeup(tty); tty_kref_put(tty); @@ -929,17 +906,13 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port) struct moschip_port *mos7840_port; struct moschip_port *port0; - if (mos7840_port_paranoia_check(port, __func__)) { - dbg("%s", "Port Paranoia failed"); + if (mos7840_port_paranoia_check(port, __func__)) return -ENODEV; - } serial = port->serial; - if (mos7840_serial_paranoia_check(serial, __func__)) { - dbg("%s", "Serial Paranoia failed"); + if (mos7840_serial_paranoia_check(serial, __func__)) return -ENODEV; - } mos7840_port = mos7840_get_port_private(port); port0 = mos7840_get_port_private(serial->port[0]); @@ -990,20 +963,20 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port) Data = 0x0; status = mos7840_get_reg_sync(port, mos7840_port->SpRegOffset, &Data); if (status < 0) { - dbg("Reading Spreg failed"); + dev_dbg(&port->dev, "Reading Spreg failed\n"); return -1; } Data |= 0x80; status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data); if (status < 0) { - dbg("writing Spreg failed"); + dev_dbg(&port->dev, "writing Spreg failed\n"); return -1; } Data &= ~0x80; status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data); if (status < 0) { - dbg("writing Spreg failed"); + dev_dbg(&port->dev, "writing Spreg failed\n"); return -1; } /* End of block to be checked */ @@ -1012,7 +985,7 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port) status = mos7840_get_reg_sync(port, mos7840_port->ControlRegOffset, &Data); if (status < 0) { - dbg("Reading Controlreg failed"); + dev_dbg(&port->dev, "Reading Controlreg failed\n"); return -1; } Data |= 0x08; /* Driver done bit */ @@ -1020,7 +993,7 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port) status = mos7840_set_reg_sync(port, mos7840_port->ControlRegOffset, Data); if (status < 0) { - dbg("writing Controlreg failed"); + dev_dbg(&port->dev, "writing Controlreg failed\n"); return -1; } /* do register settings here */ @@ -1031,21 +1004,21 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port) Data = 0x00; status = mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data); if (status < 0) { - dbg("disabling interrupts failed"); + dev_dbg(&port->dev, "disabling interrupts failed\n"); return -1; } /* Set FIFO_CONTROL_REGISTER to the default value */ Data = 0x00; status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data); if (status < 0) { - dbg("Writing FIFO_CONTROL_REGISTER failed"); + dev_dbg(&port->dev, "Writing FIFO_CONTROL_REGISTER failed\n"); return -1; } Data = 0xcf; status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data); if (status < 0) { - dbg("Writing FIFO_CONTROL_REGISTER failed"); + dev_dbg(&port->dev, "Writing FIFO_CONTROL_REGISTER failed\n"); return -1; } @@ -1142,12 +1115,12 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port) * (can't set it up in mos7840_startup as the * * structures were not set up at that time.) */ - dbg("port number is %d", port->number); - dbg("serial number is %d", port->serial->minor); - dbg("Bulkin endpoint is %d", port->bulk_in_endpointAddress); - dbg("BulkOut endpoint is %d", port->bulk_out_endpointAddress); - dbg("Interrupt endpoint is %d", port->interrupt_in_endpointAddress); - dbg("port's number in the device is %d", mos7840_port->port_num); + dev_dbg(&port->dev, "port number is %d\n", port->number); + dev_dbg(&port->dev, "serial number is %d\n", port->serial->minor); + dev_dbg(&port->dev, "Bulkin endpoint is %d\n", port->bulk_in_endpointAddress); + dev_dbg(&port->dev, "BulkOut endpoint is %d\n", port->bulk_out_endpointAddress); + dev_dbg(&port->dev, "Interrupt endpoint is %d\n", port->interrupt_in_endpointAddress); + dev_dbg(&port->dev, "port's number in the device is %d\n", mos7840_port->port_num); mos7840_port->read_urb = port->read_urb; /* set up our bulk in urb */ @@ -1171,8 +1144,7 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port) mos7840_bulk_in_callback, mos7840_port); } - dbg("mos7840_open: bulkin endpoint is %d", - port->bulk_in_endpointAddress); + dev_dbg(&port->dev, "%s: bulkin endpoint is %d\n", __func__, port->bulk_in_endpointAddress); mos7840_port->read_urb_busy = true; response = usb_submit_urb(mos7840_port->read_urb, GFP_KERNEL); if (response) { @@ -1197,9 +1169,6 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port) mos7840_port->icount.tx = 0; mos7840_port->icount.rx = 0; - dbg("usb_serial serial:%p mos7840_port:%p\n usb_serial_port port:%p", - serial, mos7840_port, port); - return 0; } @@ -1221,10 +1190,8 @@ static int mos7840_chars_in_buffer(struct tty_struct *tty) unsigned long flags; struct moschip_port *mos7840_port; - if (mos7840_port_paranoia_check(port, __func__)) { - dbg("%s", "Invalid port"); + if (mos7840_port_paranoia_check(port, __func__)) return 0; - } mos7840_port = mos7840_get_port_private(port); if (mos7840_port == NULL) @@ -1238,7 +1205,7 @@ static int mos7840_chars_in_buffer(struct tty_struct *tty) } } spin_unlock_irqrestore(&mos7840_port->pool_lock, flags); - dbg("%s - returns %d", __func__, chars); + dev_dbg(&port->dev, "%s - returns %d\n", __func__, chars); return chars; } @@ -1256,16 +1223,12 @@ static void mos7840_close(struct usb_serial_port *port) int j; __u16 Data; - if (mos7840_port_paranoia_check(port, __func__)) { - dbg("%s", "Port Paranoia failed"); + if (mos7840_port_paranoia_check(port, __func__)) return; - } serial = mos7840_get_usb_serial(port, __func__); - if (!serial) { - dbg("%s", "Serial Paranoia failed"); + if (!serial) return; - } mos7840_port = mos7840_get_port_private(port); port0 = mos7840_get_port_private(serial->port[0]); @@ -1291,27 +1254,26 @@ static void mos7840_close(struct usb_serial_port *port) * and interrupt read if they exists */ if (serial->dev) { if (mos7840_port->write_urb) { - dbg("%s", "Shutdown bulk write"); + dev_dbg(&port->dev, "%s", "Shutdown bulk write\n"); usb_kill_urb(mos7840_port->write_urb); } if (mos7840_port->read_urb) { - dbg("%s", "Shutdown bulk read"); + dev_dbg(&port->dev, "%s", "Shutdown bulk read\n"); usb_kill_urb(mos7840_port->read_urb); mos7840_port->read_urb_busy = false; } if ((&mos7840_port->control_urb)) { - dbg("%s", "Shutdown control read"); + dev_dbg(&port->dev, "%s", "Shutdown control read\n"); /*/ usb_kill_urb (mos7840_port->control_urb); */ } } /* if(mos7840_port->ctrl_buf != NULL) */ /* kfree(mos7840_port->ctrl_buf); */ port0->open_ports--; - dbg("mos7840_num_open_ports in close%d:in port%d", - port0->open_ports, port->number); + dev_dbg(&port->dev, "%s in close%d:in port%d\n", __func__, port0->open_ports, port->number); if (port0->open_ports == 0) { if (serial->port[0]->interrupt_in_urb) { - dbg("%s", "Shutdown interrupt_in_urb"); + dev_dbg(&port->dev, "Shutdown interrupt_in_urb\n"); usb_kill_urb(serial->port[0]->interrupt_in_urb); } } @@ -1363,7 +1325,7 @@ static void mos7840_block_until_chase_response(struct tty_struct *tty, /* No activity.. count down section */ wait--; if (wait == 0) { - dbg("%s - TIMEOUT", __func__); + dev_dbg(&mos7840_port->port->dev, "%s - TIMEOUT\n", __func__); return; } else { /* Reset timeout value back to seconds */ @@ -1384,16 +1346,12 @@ static void mos7840_break(struct tty_struct *tty, int break_state) struct usb_serial *serial; struct moschip_port *mos7840_port; - if (mos7840_port_paranoia_check(port, __func__)) { - dbg("%s", "Port Paranoia failed"); + if (mos7840_port_paranoia_check(port, __func__)) return; - } serial = mos7840_get_usb_serial(port, __func__); - if (!serial) { - dbg("%s", "Serial Paranoia failed"); + if (!serial) return; - } mos7840_port = mos7840_get_port_private(port); @@ -1411,8 +1369,7 @@ static void mos7840_break(struct tty_struct *tty, int break_state) /* FIXME: no locking on shadowLCR anywhere in driver */ mos7840_port->shadowLCR = data; - dbg("mcs7840_break mos7840_port->shadowLCR is %x", - mos7840_port->shadowLCR); + dev_dbg(&port->dev, "%s mos7840_port->shadowLCR is %x\n", __func__, mos7840_port->shadowLCR); mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, mos7840_port->shadowLCR); } @@ -1433,17 +1390,12 @@ static int mos7840_write_room(struct tty_struct *tty) unsigned long flags; struct moschip_port *mos7840_port; - if (mos7840_port_paranoia_check(port, __func__)) { - dbg("%s", "Invalid port"); - dbg("%s", " mos7840_write_room:leaving ..........."); + if (mos7840_port_paranoia_check(port, __func__)) return -1; - } mos7840_port = mos7840_get_port_private(port); - if (mos7840_port == NULL) { - dbg("%s", "mos7840_break:leaving ..........."); + if (mos7840_port == NULL) return -1; - } spin_lock_irqsave(&mos7840_port->pool_lock, flags); for (i = 0; i < NUM_URBS; ++i) { @@ -1453,7 +1405,7 @@ static int mos7840_write_room(struct tty_struct *tty) spin_unlock_irqrestore(&mos7840_port->pool_lock, flags); room = (room == 0) ? 0 : room - URB_TRANSFER_BUFFER_SIZE + 1; - dbg("%s - returns %d", __func__, room); + dev_dbg(&mos7840_port->port->dev, "%s - returns %d\n", __func__, room); return room; } @@ -1486,9 +1438,8 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port, Data = 0x00; status = mos7840_get_uart_reg(port, LINE_CONTROL_REGISTER, &Data); mos7840_port->shadowLCR = Data; - dbg("mos7840_write: LINE_CONTROL_REGISTER is %x", Data); - dbg("mos7840_write: mos7840_port->shadowLCR is %x", - mos7840_port->shadowLCR); + dev_dbg(&port->dev, "%s: LINE_CONTROL_REGISTER is %x\n", __func__, Data); + dev_dbg(&port->dev, "%s: mos7840_port->shadowLCR is %x\n", __func__, mos7840_port->shadowLCR); /* Data = 0x03; */ /* status = mos7840_set_uart_reg(port,LINE_CONTROL_REGISTER,Data); */ @@ -1501,34 +1452,27 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port, /* status = mos7840_set_uart_reg(port,DIVISOR_LATCH_LSB,Data); */ Data = 0x00; status = mos7840_get_uart_reg(port, DIVISOR_LATCH_LSB, &Data); - dbg("mos7840_write:DLL value is %x", Data); + dev_dbg(&port->dev, "%s: DLL value is %x\n", __func__, Data); Data = 0x0; status = mos7840_get_uart_reg(port, DIVISOR_LATCH_MSB, &Data); - dbg("mos7840_write:DLM value is %x", Data); + dev_dbg(&port->dev, "%s: DLM value is %x\n", __func__, Data); Data = Data & ~SERIAL_LCR_DLAB; - dbg("mos7840_write: mos7840_port->shadowLCR is %x", - mos7840_port->shadowLCR); + dev_dbg(&port->dev, "%s: mos7840_port->shadowLCR is %x\n", __func__, mos7840_port->shadowLCR); status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data); #endif - if (mos7840_port_paranoia_check(port, __func__)) { - dbg("%s", "Port Paranoia failed"); + if (mos7840_port_paranoia_check(port, __func__)) return -1; - } serial = port->serial; - if (mos7840_serial_paranoia_check(serial, __func__)) { - dbg("%s", "Serial Paranoia failed"); + if (mos7840_serial_paranoia_check(serial, __func__)) return -1; - } mos7840_port = mos7840_get_port_private(port); - if (mos7840_port == NULL) { - dbg("%s", "mos7840_port is NULL"); + if (mos7840_port == NULL) return -1; - } /* try to find a free urb in the list */ urb = NULL; @@ -1538,14 +1482,14 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port, if (!mos7840_port->busy[i]) { mos7840_port->busy[i] = 1; urb = mos7840_port->write_urb_pool[i]; - dbg("URB:%d", i); + dev_dbg(&port->dev, "URB:%d\n", i); break; } } spin_unlock_irqrestore(&mos7840_port->pool_lock, flags); if (urb == NULL) { - dbg("%s - no more free urbs", __func__); + dev_dbg(&port->dev, "%s - no more free urbs\n", __func__); goto exit; } @@ -1585,7 +1529,7 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port, } data1 = urb->transfer_buffer; - dbg("bulkout endpoint is %d", port->bulk_out_endpointAddress); + dev_dbg(&port->dev, "bulkout endpoint is %d\n", port->bulk_out_endpointAddress); /* Turn on LED */ if (mos7840_port->has_led && !mos7840_port->led_flag) { @@ -1608,7 +1552,7 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port, bytes_sent = transfer_size; mos7840_port->icount.tx += transfer_size; smp_wmb(); - dbg("mos7840_port->icount.tx is %d:", mos7840_port->icount.tx); + dev_dbg(&port->dev, "mos7840_port->icount.tx is %d:\n", mos7840_port->icount.tx); exit: return bytes_sent; @@ -1626,12 +1570,8 @@ static void mos7840_throttle(struct tty_struct *tty) struct moschip_port *mos7840_port; int status; - if (mos7840_port_paranoia_check(port, __func__)) { - dbg("%s", "Invalid port"); + if (mos7840_port_paranoia_check(port, __func__)) return; - } - - dbg("- port %d", port->number); mos7840_port = mos7840_get_port_private(port); @@ -1639,7 +1579,7 @@ static void mos7840_throttle(struct tty_struct *tty) return; if (!mos7840_port->open) { - dbg("%s", "port not opened"); + dev_dbg(&port->dev, "%s", "port not opened\n"); return; } @@ -1672,16 +1612,14 @@ static void mos7840_unthrottle(struct tty_struct *tty) int status; struct moschip_port *mos7840_port = mos7840_get_port_private(port); - if (mos7840_port_paranoia_check(port, __func__)) { - dbg("%s", "Invalid port"); + if (mos7840_port_paranoia_check(port, __func__)) return; - } if (mos7840_port == NULL) return; if (!mos7840_port->open) { - dbg("%s - port not opened", __func__); + dev_dbg(&port->dev, "%s - port not opened\n", __func__); return; } @@ -1726,7 +1664,7 @@ static int mos7840_tiocmget(struct tty_struct *tty) | ((msr & MOS7840_MSR_RI) ? TIOCM_RI : 0) | ((msr & MOS7840_MSR_DSR) ? TIOCM_DSR : 0); - dbg("%s - 0x%04X", __func__, result); + dev_dbg(&port->dev, "%s - 0x%04X\n", __func__, result); return result; } @@ -1764,7 +1702,7 @@ static int mos7840_tiocmset(struct tty_struct *tty, status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, mcr); if (status < 0) { - dbg("setting MODEM_CONTROL_REGISTER Failed"); + dev_dbg(&port->dev, "setting MODEM_CONTROL_REGISTER Failed\n"); return status; } @@ -1776,10 +1714,11 @@ static int mos7840_tiocmset(struct tty_struct *tty, * this function calculates the proper baud rate divisor for the specified * baud rate. *****************************************************************************/ -static int mos7840_calc_baud_rate_divisor(int baudRate, int *divisor, +static int mos7840_calc_baud_rate_divisor(struct usb_serial_port *port, + int baudRate, int *divisor, __u16 *clk_sel_val) { - dbg("%s - %d", __func__, baudRate); + dev_dbg(&port->dev, "%s - %d\n", __func__, baudRate); if (baudRate <= 115200) { *divisor = 115200 / baudRate; @@ -1832,11 +1771,11 @@ static int mos7840_calc_baud_rate_divisor(int baudRate, int *divisor, custom++; *divisor = custom; - dbg(" Baud %d = %d", baudrate, custom); + dev_dbg(&port->dev, " Baud %d = %d\n", baudrate, custom); return 0; } - dbg("%s", " Baud calculation Failed..."); + dev_dbg(&port->dev, "%s", " Baud calculation Failed...\n"); return -1; #endif } @@ -1860,21 +1799,17 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port, if (mos7840_port == NULL) return -1; - port = (struct usb_serial_port *)mos7840_port->port; - if (mos7840_port_paranoia_check(port, __func__)) { - dbg("%s", "Invalid port"); + port = mos7840_port->port; + if (mos7840_port_paranoia_check(port, __func__)) return -1; - } - if (mos7840_serial_paranoia_check(port->serial, __func__)) { - dbg("%s", "Invalid Serial"); + if (mos7840_serial_paranoia_check(port->serial, __func__)) return -1; - } number = mos7840_port->port->number - mos7840_port->port->serial->minor; - dbg("%s - port = %d, baud = %d", __func__, - mos7840_port->port->number, baudRate); + dev_dbg(&port->dev, "%s - port = %d, baud = %d\n", __func__, + mos7840_port->port->number, baudRate); /* reset clk_uart_sel in spregOffset */ if (baudRate > 115200) { #ifdef HW_flow_control @@ -1885,7 +1820,7 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port, status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); if (status < 0) { - dbg("Writing spreg failed in set_serial_baud"); + dev_dbg(&port->dev, "Writing spreg failed in set_serial_baud\n"); return -1; } #endif @@ -1898,7 +1833,7 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port, status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); if (status < 0) { - dbg("Writing spreg failed in set_serial_baud"); + dev_dbg(&port->dev, "Writing spreg failed in set_serial_baud\n"); return -1; } #endif @@ -1908,19 +1843,19 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port, if (1) { /* baudRate <= 115200) */ clk_sel_val = 0x0; Data = 0x0; - status = mos7840_calc_baud_rate_divisor(baudRate, &divisor, + status = mos7840_calc_baud_rate_divisor(port, baudRate, &divisor, &clk_sel_val); status = mos7840_get_reg_sync(port, mos7840_port->SpRegOffset, &Data); if (status < 0) { - dbg("reading spreg failed in set_serial_baud"); + dev_dbg(&port->dev, "reading spreg failed in set_serial_baud\n"); return -1; } Data = (Data & 0x8f) | clk_sel_val; status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data); if (status < 0) { - dbg("Writing spreg failed in set_serial_baud"); + dev_dbg(&port->dev, "Writing spreg failed in set_serial_baud\n"); return -1; } /* Calculate the Divisor */ @@ -1936,11 +1871,11 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port, /* Write the divisor */ Data = (unsigned char)(divisor & 0xff); - dbg("set_serial_baud Value to write DLL is %x", Data); + dev_dbg(&port->dev, "set_serial_baud Value to write DLL is %x\n", Data); mos7840_set_uart_reg(port, DIVISOR_LATCH_LSB, Data); Data = (unsigned char)((divisor & 0xff00) >> 8); - dbg("set_serial_baud Value to write DLM is %x", Data); + dev_dbg(&port->dev, "set_serial_baud Value to write DLM is %x\n", Data); mos7840_set_uart_reg(port, DIVISOR_LATCH_MSB, Data); /* Disable access to divisor latch */ @@ -1975,24 +1910,18 @@ static void mos7840_change_port_settings(struct tty_struct *tty, if (mos7840_port == NULL) return; - port = (struct usb_serial_port *)mos7840_port->port; + port = mos7840_port->port; - if (mos7840_port_paranoia_check(port, __func__)) { - dbg("%s", "Invalid port"); + if (mos7840_port_paranoia_check(port, __func__)) return; - } - if (mos7840_serial_paranoia_check(port->serial, __func__)) { - dbg("%s", "Invalid Serial"); + if (mos7840_serial_paranoia_check(port->serial, __func__)) return; - } serial = port->serial; - dbg("%s - port %d", __func__, mos7840_port->port->number); - if (!mos7840_port->open) { - dbg("%s - port not opened", __func__); + dev_dbg(&port->dev, "%s - port not opened\n", __func__); return; } @@ -2027,14 +1956,14 @@ static void mos7840_change_port_settings(struct tty_struct *tty, if (cflag & PARENB) { if (cflag & PARODD) { lParity = LCR_PAR_ODD; - dbg("%s - parity = odd", __func__); + dev_dbg(&port->dev, "%s - parity = odd\n", __func__); } else { lParity = LCR_PAR_EVEN; - dbg("%s - parity = even", __func__); + dev_dbg(&port->dev, "%s - parity = even\n", __func__); } } else { - dbg("%s - parity = none", __func__); + dev_dbg(&port->dev, "%s - parity = none\n", __func__); } if (cflag & CMSPAR) @@ -2043,10 +1972,10 @@ static void mos7840_change_port_settings(struct tty_struct *tty, /* Change the Stop bit */ if (cflag & CSTOPB) { lStop = LCR_STOP_2; - dbg("%s - stop bits = 2", __func__); + dev_dbg(&port->dev, "%s - stop bits = 2\n", __func__); } else { lStop = LCR_STOP_1; - dbg("%s - stop bits = 1", __func__); + dev_dbg(&port->dev, "%s - stop bits = 1\n", __func__); } /* Update the LCR with the correct value */ @@ -2054,8 +1983,8 @@ static void mos7840_change_port_settings(struct tty_struct *tty, ~(LCR_BITS_MASK | LCR_STOP_MASK | LCR_PAR_MASK); mos7840_port->shadowLCR |= (lData | lParity | lStop); - dbg("mos7840_change_port_settings mos7840_port->shadowLCR is %x", - mos7840_port->shadowLCR); + dev_dbg(&port->dev, "%s - mos7840_port->shadowLCR is %x\n", __func__, + mos7840_port->shadowLCR); /* Disable Interrupts */ Data = 0x00; mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data); @@ -2096,11 +2025,11 @@ static void mos7840_change_port_settings(struct tty_struct *tty, if (!baud) { /* pick a default, any default... */ - dbg("%s", "Picked default baud..."); + dev_dbg(&port->dev, "%s", "Picked default baud...\n"); baud = 9600; } - dbg("%s - baud rate = %d", __func__, baud); + dev_dbg(&port->dev, "%s - baud rate = %d\n", __func__, baud); status = mos7840_send_cmd_write_baud_rate(mos7840_port, baud); /* Enable Interrupts */ @@ -2111,15 +2040,15 @@ static void mos7840_change_port_settings(struct tty_struct *tty, mos7840_port->read_urb_busy = true; status = usb_submit_urb(mos7840_port->read_urb, GFP_ATOMIC); if (status) { - dbg("usb_submit_urb(read bulk) failed, status = %d", + dev_dbg(&port->dev, "usb_submit_urb(read bulk) failed, status = %d\n", status); mos7840_port->read_urb_busy = false; } } wake_up(&mos7840_port->delta_msr_wait); mos7840_port->delta_msr_cond = 1; - dbg("mos7840_change_port_settings mos7840_port->shadowLCR is End %x", - mos7840_port->shadowLCR); + dev_dbg(&port->dev, "%s - mos7840_port->shadowLCR is End %x\n", __func__, + mos7840_port->shadowLCR); } /***************************************************************************** @@ -2137,17 +2066,13 @@ static void mos7840_set_termios(struct tty_struct *tty, struct usb_serial *serial; struct moschip_port *mos7840_port; - if (mos7840_port_paranoia_check(port, __func__)) { - dbg("%s", "Invalid port"); + if (mos7840_port_paranoia_check(port, __func__)) return; - } serial = port->serial; - if (mos7840_serial_paranoia_check(serial, __func__)) { - dbg("%s", "Invalid Serial"); + if (mos7840_serial_paranoia_check(serial, __func__)) return; - } mos7840_port = mos7840_get_port_private(port); @@ -2155,26 +2080,26 @@ static void mos7840_set_termios(struct tty_struct *tty, return; if (!mos7840_port->open) { - dbg("%s - port not opened", __func__); + dev_dbg(&port->dev, "%s - port not opened\n", __func__); return; } - dbg("%s", "setting termios - "); + dev_dbg(&port->dev, "%s", "setting termios - \n"); cflag = tty->termios.c_cflag; - dbg("%s - clfag %08x iflag %08x", __func__, - tty->termios.c_cflag, RELEVANT_IFLAG(tty->termios.c_iflag)); - dbg("%s - old clfag %08x old iflag %08x", __func__, - old_termios->c_cflag, RELEVANT_IFLAG(old_termios->c_iflag)); - dbg("%s - port %d", __func__, port->number); + dev_dbg(&port->dev, "%s - clfag %08x iflag %08x\n", __func__, + tty->termios.c_cflag, RELEVANT_IFLAG(tty->termios.c_iflag)); + dev_dbg(&port->dev, "%s - old clfag %08x old iflag %08x\n", __func__, + old_termios->c_cflag, RELEVANT_IFLAG(old_termios->c_iflag)); + dev_dbg(&port->dev, "%s - port %d\n", __func__, port->number); /* change the port settings to the new ones specified */ mos7840_change_port_settings(tty, mos7840_port, old_termios); if (!mos7840_port->read_urb) { - dbg("%s", "URB KILLED !!!!!"); + dev_dbg(&port->dev, "%s", "URB KILLED !!!!!\n"); return; } @@ -2182,7 +2107,7 @@ static void mos7840_set_termios(struct tty_struct *tty, mos7840_port->read_urb_busy = true; status = usb_submit_urb(mos7840_port->read_urb, GFP_ATOMIC); if (status) { - dbg("usb_submit_urb(read bulk) failed, status = %d", + dev_dbg(&port->dev, "usb_submit_urb(read bulk) failed, status = %d\n", status); mos7840_port->read_urb_busy = false; } @@ -2207,10 +2132,8 @@ static int mos7840_get_lsr_info(struct tty_struct *tty, unsigned int result = 0; count = mos7840_chars_in_buffer(tty); - if (count == 0) { - dbg("%s -- Empty", __func__); + if (count == 0) result = TIOCSER_TEMT; - } if (copy_to_user(value, &result, sizeof(int))) return -EFAULT; @@ -2273,8 +2196,8 @@ static int mos7840_get_icount(struct tty_struct *tty, icount->brk = cnow.brk; icount->buf_overrun = cnow.buf_overrun; - dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d", __func__, - port->number, icount->rx, icount->tx); + dev_dbg(&port->dev, "%s TIOCGICOUNT RX=%d, TX=%d\n", __func__, + icount->rx, icount->tx); return 0; } @@ -2293,35 +2216,33 @@ static int mos7840_ioctl(struct tty_struct *tty, struct async_icount cnow; struct async_icount cprev; - if (mos7840_port_paranoia_check(port, __func__)) { - dbg("%s", "Invalid port"); + if (mos7840_port_paranoia_check(port, __func__)) return -1; - } mos7840_port = mos7840_get_port_private(port); if (mos7840_port == NULL) return -1; - dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd); + dev_dbg(&port->dev, "%s - cmd = 0x%x\n", __func__, cmd); switch (cmd) { /* return number of bytes available */ case TIOCSERGETLSR: - dbg("%s (%d) TIOCSERGETLSR", __func__, port->number); + dev_dbg(&port->dev, "%s TIOCSERGETLSR\n", __func__); return mos7840_get_lsr_info(tty, argp); case TIOCGSERIAL: - dbg("%s (%d) TIOCGSERIAL", __func__, port->number); + dev_dbg(&port->dev, "%s TIOCGSERIAL\n", __func__); return mos7840_get_serial_info(mos7840_port, argp); case TIOCSSERIAL: - dbg("%s (%d) TIOCSSERIAL", __func__, port->number); + dev_dbg(&port->dev, "%s TIOCSSERIAL\n", __func__); break; case TIOCMIWAIT: - dbg("%s (%d) TIOCMIWAIT", __func__, port->number); + dev_dbg(&port->dev, "%s TIOCMIWAIT\n", __func__); cprev = mos7840_port->icount; while (1) { /* interruptible_sleep_on(&mos7840_port->delta_msr_wait); */ @@ -2437,11 +2358,6 @@ static int mos7840_startup(struct usb_serial *serial) int i, status; __u16 Data; - if (!serial) { - dbg("%s", "Invalid Handler"); - return -1; - } - dev = serial->dev; /* we set up the pointers to the endpoints in the mos7840_open * @@ -2449,7 +2365,7 @@ static int mos7840_startup(struct usb_serial *serial) /* set up port private structures */ for (i = 0; i < serial->num_ports; ++i) { - dbg ("mos7840_startup: configuring port %d............", i); + dev_dbg(&dev->dev, "mos7840_startup: configuring port %d............\n", i); mos7840_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL); if (mos7840_port == NULL) { dev_err(&dev->dev, "%s - Out of memory\n", __func__); @@ -2470,10 +2386,10 @@ static int mos7840_startup(struct usb_serial *serial) * usb-serial.c:get_free_serial() and cannot therefore be used * to index device instances */ mos7840_port->port_num = i + 1; - dbg ("serial->port[i]->number = %d", serial->port[i]->number); - dbg ("serial->port[i]->serial->minor = %d", serial->port[i]->serial->minor); - dbg ("mos7840_port->port_num = %d", mos7840_port->port_num); - dbg ("serial->minor = %d", serial->minor); + dev_dbg(&dev->dev, "serial->port[i]->number = %d\n", serial->port[i]->number); + dev_dbg(&dev->dev, "serial->port[i]->serial->minor = %d\n", serial->port[i]->serial->minor); + dev_dbg(&dev->dev, "mos7840_port->port_num = %d\n", mos7840_port->port_num); + dev_dbg(&dev->dev, "serial->minor = %d\n", serial->minor); if (mos7840_port->port_num == 1) { mos7840_port->SpRegOffset = 0x0; @@ -2500,18 +2416,17 @@ static int mos7840_startup(struct usb_serial *serial) mos7840_port->ControlRegOffset = 0xd; mos7840_port->DcrRegOffset = 0x1c; } - mos7840_dump_serial_port(mos7840_port); + mos7840_dump_serial_port(serial->port[i], mos7840_port); mos7840_set_port_private(serial->port[i], mos7840_port); /* enable rx_disable bit in control register */ status = mos7840_get_reg_sync(serial->port[i], mos7840_port->ControlRegOffset, &Data); if (status < 0) { - dbg("Reading ControlReg failed status-0x%x", status); + dev_dbg(&dev->dev, "Reading ControlReg failed status-0x%x\n", status); break; } else - dbg("ControlReg Reading success val is %x, status%d", - Data, status); + dev_dbg(&dev->dev, "ControlReg Reading success val is %x, status%d\n", Data, status); Data |= 0x08; /* setting driver done bit */ Data |= 0x04; /* sp1_bit to have cts change reflect in modem status reg */ @@ -2520,11 +2435,10 @@ static int mos7840_startup(struct usb_serial *serial) status = mos7840_set_reg_sync(serial->port[i], mos7840_port->ControlRegOffset, Data); if (status < 0) { - dbg("Writing ControlReg failed(rx_disable) status-0x%x", status); + dev_dbg(&dev->dev, "Writing ControlReg failed(rx_disable) status-0x%x\n", status); break; } else - dbg("ControlReg Writing success(rx_disable) status%d", - status); + dev_dbg(&dev->dev, "ControlReg Writing success(rx_disable) status%d\n", status); /* Write default values in DCR (i.e 0x01 in DCR0, 0x05 in DCR2 and 0x24 in DCR3 */ @@ -2532,61 +2446,57 @@ static int mos7840_startup(struct usb_serial *serial) status = mos7840_set_reg_sync(serial->port[i], (__u16) (mos7840_port->DcrRegOffset + 0), Data); if (status < 0) { - dbg("Writing DCR0 failed status-0x%x", status); + dev_dbg(&dev->dev, "Writing DCR0 failed status-0x%x\n", status); break; } else - dbg("DCR0 Writing success status%d", status); + dev_dbg(&dev->dev, "DCR0 Writing success status%d\n", status); Data = 0x05; status = mos7840_set_reg_sync(serial->port[i], (__u16) (mos7840_port->DcrRegOffset + 1), Data); if (status < 0) { - dbg("Writing DCR1 failed status-0x%x", status); + dev_dbg(&dev->dev, "Writing DCR1 failed status-0x%x\n", status); break; } else - dbg("DCR1 Writing success status%d", status); + dev_dbg(&dev->dev, "DCR1 Writing success status%d\n", status); Data = 0x24; status = mos7840_set_reg_sync(serial->port[i], (__u16) (mos7840_port->DcrRegOffset + 2), Data); if (status < 0) { - dbg("Writing DCR2 failed status-0x%x", status); + dev_dbg(&dev->dev, "Writing DCR2 failed status-0x%x\n", status); break; } else - dbg("DCR2 Writing success status%d", status); + dev_dbg(&dev->dev, "DCR2 Writing success status%d\n", status); /* write values in clkstart0x0 and clkmulti 0x20 */ Data = 0x0; status = mos7840_set_reg_sync(serial->port[i], CLK_START_VALUE_REGISTER, Data); if (status < 0) { - dbg("Writing CLK_START_VALUE_REGISTER failed status-0x%x", status); + dev_dbg(&dev->dev, "Writing CLK_START_VALUE_REGISTER failed status-0x%x\n", status); break; } else - dbg("CLK_START_VALUE_REGISTER Writing success status%d", status); + dev_dbg(&dev->dev, "CLK_START_VALUE_REGISTER Writing success status%d\n", status); Data = 0x20; status = mos7840_set_reg_sync(serial->port[i], CLK_MULTI_REGISTER, Data); if (status < 0) { - dbg("Writing CLK_MULTI_REGISTER failed status-0x%x", - status); + dev_dbg(&dev->dev, "Writing CLK_MULTI_REGISTER failed status-0x%x\n", status); goto error; } else - dbg("CLK_MULTI_REGISTER Writing success status%d", - status); + dev_dbg(&dev->dev, "CLK_MULTI_REGISTER Writing success status%d\n", status); /* write value 0x0 to scratchpad register */ Data = 0x00; status = mos7840_set_uart_reg(serial->port[i], SCRATCH_PAD_REGISTER, Data); if (status < 0) { - dbg("Writing SCRATCH_PAD_REGISTER failed status-0x%x", - status); + dev_dbg(&dev->dev, "Writing SCRATCH_PAD_REGISTER failed status-0x%x\n", status); break; } else - dbg("SCRATCH_PAD_REGISTER Writing success status%d", - status); + dev_dbg(&dev->dev, "SCRATCH_PAD_REGISTER Writing success status%d\n", status); /* Zero Length flag register */ if ((mos7840_port->port_num != 1) @@ -2596,31 +2506,25 @@ static int mos7840_startup(struct usb_serial *serial) status = mos7840_set_reg_sync(serial->port[i], (__u16) (ZLP_REG1 + ((__u16)mos7840_port->port_num)), Data); - dbg("ZLIP offset %x", - (__u16) (ZLP_REG1 + - ((__u16) mos7840_port->port_num))); + dev_dbg(&dev->dev, "ZLIP offset %x\n", + (__u16)(ZLP_REG1 + ((__u16) mos7840_port->port_num))); if (status < 0) { - dbg("Writing ZLP_REG%d failed status-0x%x", - i + 2, status); + dev_dbg(&dev->dev, "Writing ZLP_REG%d failed status-0x%x\n", i + 2, status); break; } else - dbg("ZLP_REG%d Writing success status%d", - i + 2, status); + dev_dbg(&dev->dev, "ZLP_REG%d Writing success status%d\n", i + 2, status); } else { Data = 0xff; status = mos7840_set_reg_sync(serial->port[i], (__u16) (ZLP_REG1 + ((__u16)mos7840_port->port_num) - 0x1), Data); - dbg("ZLIP offset %x", - (__u16) (ZLP_REG1 + - ((__u16) mos7840_port->port_num) - 0x1)); + dev_dbg(&dev->dev, "ZLIP offset %x\n", + (__u16)(ZLP_REG1 + ((__u16) mos7840_port->port_num) - 0x1)); if (status < 0) { - dbg("Writing ZLP_REG%d failed status-0x%x", - i + 1, status); + dev_dbg(&dev->dev, "Writing ZLP_REG%d failed status-0x%x\n", i + 1, status); break; } else - dbg("ZLP_REG%d Writing success status%d", - i + 1, status); + dev_dbg(&dev->dev, "ZLP_REG%d Writing success status%d\n", i + 1, status); } mos7840_port->control_urb = usb_alloc_urb(0, GFP_KERNEL); @@ -2661,16 +2565,15 @@ static int mos7840_startup(struct usb_serial *serial) MODEM_CONTROL_REGISTER, 0x0300); } } - dbg ("mos7840_startup: all ports configured..........."); /* Zero Length flag enable */ Data = 0x0f; status = mos7840_set_reg_sync(serial->port[0], ZLP_REG5, Data); if (status < 0) { - dbg("Writing ZLP_REG5 failed status-0x%x", status); + dev_dbg(&dev->dev, "Writing ZLP_REG5 failed status-0x%x\n", status); goto error; } else - dbg("ZLP_REG5 Writing success status%d", status); + dev_dbg(&dev->dev, "ZLP_REG5 Writing success status%d\n", status); /* setting configuration feature to one */ usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), @@ -2700,11 +2603,6 @@ static void mos7840_disconnect(struct usb_serial *serial) unsigned long flags; struct moschip_port *mos7840_port; - if (!serial) { - dbg("%s", "Invalid Handler"); - return; - } - /* check for the ports to be closed,close the ports and disconnect */ /* free private structure allocated for serial port * @@ -2712,7 +2610,6 @@ static void mos7840_disconnect(struct usb_serial *serial) for (i = 0; i < serial->num_ports; ++i) { mos7840_port = mos7840_get_port_private(serial->port[i]); - dbg ("mos7840_port %d = %p", i, mos7840_port); if (mos7840_port) { spin_lock_irqsave(&mos7840_port->pool_lock, flags); mos7840_port->zombie = 1; @@ -2732,11 +2629,6 @@ static void mos7840_release(struct usb_serial *serial) int i; struct moschip_port *mos7840_port; - if (!serial) { - dbg("%s", "Invalid Handler"); - return; - } - /* check for the ports to be closed,close the ports and disconnect */ /* free private structure allocated for serial port * @@ -2744,7 +2636,6 @@ static void mos7840_release(struct usb_serial *serial) for (i = 0; i < serial->num_ports; ++i) { mos7840_port = mos7840_get_port_private(serial->port[i]); - dbg("mos7840_port %d = %p", i, mos7840_port); if (mos7840_port) { if (mos7840_port->has_led) { /* Turn off LED */ @@ -2801,6 +2692,3 @@ module_usb_serial_driver(serial_drivers, id_table); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); diff --git a/drivers/usb/serial/navman.c b/drivers/usb/serial/navman.c index d95452cc076d..1566f8f500ae 100644 --- a/drivers/usb/serial/navman.c +++ b/drivers/usb/serial/navman.c @@ -21,8 +21,6 @@ #include <linux/usb.h> #include <linux/usb/serial.h> -static bool debug; - static const struct usb_device_id id_table[] = { { USB_DEVICE(0x0a99, 0x0001) }, /* Talon Technology device */ { USB_DEVICE(0x0df7, 0x0900) }, /* Mobile Action i-gotU */ @@ -55,8 +53,7 @@ static void navman_read_int_callback(struct urb *urb) goto exit; } - usb_serial_debug_data(debug, &port->dev, __func__, - urb->actual_length, data); + usb_serial_debug_data(&port->dev, __func__, urb->actual_length, data); tty = tty_port_tty_get(&port->port); if (tty && urb->actual_length) { @@ -123,6 +120,3 @@ static struct usb_serial_driver * const serial_drivers[] = { module_usb_serial_driver(serial_drivers, id_table); MODULE_LICENSE("GPL"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c index 6f3d7051c7f4..6def58b79382 100644 --- a/drivers/usb/serial/omninet.c +++ b/drivers/usb/serial/omninet.c @@ -23,8 +23,6 @@ #include <linux/usb.h> #include <linux/usb/serial.h> -static bool debug; - /* * Version Information */ @@ -164,31 +162,21 @@ static void omninet_read_bulk_callback(struct urb *urb) struct omninet_header *header = (struct omninet_header *) &data[0]; int status = urb->status; int result; - int i; if (status) { - dbg("%s - nonzero read bulk status received: %d", - __func__, status); + dev_dbg(&port->dev, "%s - nonzero read bulk status received: %d\n", + __func__, status); return; } - if (debug && header->oh_xxx != 0x30) { - if (urb->actual_length) { - printk(KERN_DEBUG "%s: omninet_read %d: ", - __FILE__, header->oh_len); - for (i = 0; i < (header->oh_len + - OMNINET_HEADERLEN); i++) - printk("%.2x ", data[i]); - printk("\n"); - } - } - if (urb->actual_length && header->oh_len) { struct tty_struct *tty = tty_port_tty_get(&port->port); - tty_insert_flip_string(tty, data + OMNINET_DATAOFFSET, + if (tty) { + tty_insert_flip_string(tty, data + OMNINET_DATAOFFSET, header->oh_len); - tty_flip_buffer_push(tty); - tty_kref_put(tty); + tty_flip_buffer_push(tty); + tty_kref_put(tty); + } } /* Continue trying to always read */ @@ -212,12 +200,12 @@ static int omninet_write(struct tty_struct *tty, struct usb_serial_port *port, int result; if (count == 0) { - dbg("%s - write request of 0 bytes", __func__); + dev_dbg(&port->dev, "%s - write request of 0 bytes\n", __func__); return 0; } if (!test_and_clear_bit(0, &port->write_urbs_free)) { - dbg("%s - already writing", __func__); + dev_dbg(&port->dev, "%s - already writing\n", __func__); return 0; } @@ -226,8 +214,8 @@ static int omninet_write(struct tty_struct *tty, struct usb_serial_port *port, memcpy(wport->write_urb->transfer_buffer + OMNINET_DATAOFFSET, buf, count); - usb_serial_debug_data(debug, &port->dev, __func__, count, - wport->write_urb->transfer_buffer); + usb_serial_debug_data(&port->dev, __func__, count, + wport->write_urb->transfer_buffer); header->oh_seq = od->od_outseq++; header->oh_len = count; @@ -261,7 +249,7 @@ static int omninet_write_room(struct tty_struct *tty) if (test_bit(0, &wport->write_urbs_free)) room = wport->bulk_out_size - OMNINET_HEADERLEN; - dbg("%s - returns %d", __func__, room); + dev_dbg(&port->dev, "%s - returns %d\n", __func__, room); return room; } @@ -275,8 +263,8 @@ static void omninet_write_bulk_callback(struct urb *urb) set_bit(0, &port->write_urbs_free); if (status) { - dbg("%s - nonzero write bulk status received: %d", - __func__, status); + dev_dbg(&port->dev, "%s - nonzero write bulk status received: %d\n", + __func__, status); return; } @@ -304,6 +292,3 @@ module_usb_serial_driver(serial_drivers, id_table); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c index 02cb1b7f6559..41b1647306eb 100644 --- a/drivers/usb/serial/opticon.c +++ b/drivers/usb/serial/opticon.c @@ -32,8 +32,6 @@ * an examples of 1D barcode types are EAN, UPC, Code39, IATA etc.. */ #define DRIVER_DESC "Opticon USB barcode to serial driver (1D)" -static bool debug; - static const struct usb_device_id id_table[] = { { USB_DEVICE(0x065a, 0x0009) }, { }, @@ -78,17 +76,16 @@ static void opticon_read_bulk_callback(struct urb *urb) case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", - __func__, status); + dev_dbg(&priv->udev->dev, "%s - urb shutting down with status: %d\n", + __func__, status); return; default: - dbg("%s - nonzero urb status received: %d", - __func__, status); + dev_dbg(&priv->udev->dev, "%s - nonzero urb status received: %d\n", + __func__, status); goto exit; } - usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, - data); + usb_serial_debug_data(&port->dev, __func__, urb->actual_length, data); if (urb->actual_length > 2) { data_length = urb->actual_length - 2; @@ -229,8 +226,8 @@ static void opticon_write_control_callback(struct urb *urb) kfree(urb->setup_packet); if (status) - dbg("%s - nonzero write bulk status received: %d", - __func__, status); + dev_dbg(&priv->udev->dev, "%s - nonzero write bulk status received: %d\n", + __func__, status); spin_lock_irqsave(&priv->lock, flags); --priv->outstanding_urbs; @@ -253,7 +250,7 @@ static int opticon_write(struct tty_struct *tty, struct usb_serial_port *port, spin_lock_irqsave(&priv->lock, flags); if (priv->outstanding_urbs > URB_UPPER_LIMIT) { spin_unlock_irqrestore(&priv->lock, flags); - dbg("%s - write limit hit", __func__); + dev_dbg(&port->dev, "%s - write limit hit\n", __func__); return 0; } priv->outstanding_urbs++; @@ -276,7 +273,7 @@ static int opticon_write(struct tty_struct *tty, struct usb_serial_port *port, memcpy(buffer, buf, count); - usb_serial_debug_data(debug, &port->dev, __func__, count, buffer); + usb_serial_debug_data(&port->dev, __func__, count, buffer); /* The conncected devices do not have a bulk write endpoint, * to transmit data to de barcode device the control endpoint is used */ @@ -338,7 +335,7 @@ static int opticon_write_room(struct tty_struct *tty) spin_lock_irqsave(&priv->lock, flags); if (priv->outstanding_urbs > URB_UPPER_LIMIT * 2 / 3) { spin_unlock_irqrestore(&priv->lock, flags); - dbg("%s - write limit hit", __func__); + dev_dbg(&port->dev, "%s - write limit hit\n", __func__); return 0; } spin_unlock_irqrestore(&priv->lock, flags); @@ -394,7 +391,7 @@ static int opticon_tiocmget(struct tty_struct *tty) result |= TIOCM_CTS; spin_unlock_irqrestore(&priv->lock, flags); - dbg("%s - %x", __func__, result); + dev_dbg(&port->dev, "%s - %x\n", __func__, result); return result; } @@ -466,7 +463,7 @@ static int opticon_ioctl(struct tty_struct *tty, struct usb_serial_port *port = tty->driver_data; struct opticon_private *priv = usb_get_serial_data(port->serial); - dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd); + dev_dbg(&port->dev, "%s - port %d, cmd = 0x%x\n", __func__, port->number, cmd); switch (cmd) { case TIOCGSERIAL: @@ -612,6 +609,3 @@ module_usb_serial_driver(serial_drivers, id_table); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 5ce88d1bc6f1..30cff03e9f01 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -870,7 +870,8 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0153, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0155, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0156, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0157, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0157, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf5_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0158, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0159, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0161, 0xff, 0xff, 0xff) }, @@ -1257,8 +1258,6 @@ static struct usb_serial_driver * const serial_drivers[] = { &option_1port_device, NULL }; -static bool debug; - struct option_private { u8 bInterfaceNumber; }; @@ -1369,18 +1368,19 @@ static void option_instat_callback(struct urb *urb) { int err; int status = urb->status; - struct usb_serial_port *port = urb->context; + struct usb_serial_port *port = urb->context; + struct device *dev = &port->dev; struct usb_wwan_port_private *portdata = usb_get_serial_port_data(port); - dbg("%s: urb %p port %p has data %p", __func__, urb, port, portdata); + dev_dbg(dev, "%s: urb %p port %p has data %p\n", __func__, urb, port, portdata); if (status == 0) { struct usb_ctrlrequest *req_pkt = (struct usb_ctrlrequest *)urb->transfer_buffer; if (!req_pkt) { - dbg("%s: NULL req_pkt", __func__); + dev_dbg(dev, "%s: NULL req_pkt\n", __func__); return; } if ((req_pkt->bRequestType == 0xA1) && @@ -1390,7 +1390,7 @@ static void option_instat_callback(struct urb *urb) urb->transfer_buffer + sizeof(struct usb_ctrlrequest)); - dbg("%s: signal x%x", __func__, signals); + dev_dbg(dev, "%s: signal x%x\n", __func__, signals); old_dcd_state = portdata->dcd_state; portdata->cts_state = 1; @@ -1406,17 +1406,17 @@ static void option_instat_callback(struct urb *urb) tty_kref_put(tty); } } else { - dbg("%s: type %x req %x", __func__, + dev_dbg(dev, "%s: type %x req %x\n", __func__, req_pkt->bRequestType, req_pkt->bRequest); } } else - dev_err(&port->dev, "%s: error %d\n", __func__, status); + dev_err(dev, "%s: error %d\n", __func__, status); /* Resubmit urb so we continue receiving IRQ data */ if (status != -ESHUTDOWN && status != -ENOENT) { err = usb_submit_urb(urb, GFP_ATOMIC); if (err) - dbg("%s: resubmit intr urb failed. (%d)", + dev_dbg(dev, "%s: resubmit intr urb failed. (%d)\n", __func__, err); } } @@ -1450,6 +1450,3 @@ MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_VERSION(DRIVER_VERSION); MODULE_LICENSE("GPL"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug messages"); diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c index 9f555560bfbf..933241f03fd8 100644 --- a/drivers/usb/serial/oti6858.c +++ b/drivers/usb/serial/oti6858.c @@ -66,8 +66,6 @@ static const struct usb_device_id id_table[] = { MODULE_DEVICE_TABLE(usb, id_table); -static bool debug; - /* requests */ #define OTI6858_REQ_GET_STATUS (USB_DIR_IN | USB_TYPE_VENDOR | 0x00) #define OTI6858_REQ_T_GET_STATUS 0x01 @@ -256,11 +254,11 @@ static void setup_line(struct work_struct *work) priv->setup_done = 1; spin_unlock_irqrestore(&priv->lock, flags); - dbg("%s(): submitting interrupt urb", __func__); + dev_dbg(&port->dev, "%s(): submitting interrupt urb\n", __func__); result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); if (result != 0) { - dev_err(&port->dev, "%s(): usb_submit_urb() failed" - " with error %d\n", __func__, result); + dev_err(&port->dev, "%s(): usb_submit_urb() failed with error %d\n", + __func__, result); } } @@ -310,11 +308,11 @@ static void send_data(struct work_struct *work) if (count == 0) { priv->flags.write_urb_in_use = 0; - dbg("%s(): submitting interrupt urb", __func__); + dev_dbg(&port->dev, "%s(): submitting interrupt urb\n", __func__); result = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO); if (result != 0) { - dev_err(&port->dev, "%s(): usb_submit_urb() failed" - " with error %d\n", __func__, result); + dev_err(&port->dev, "%s(): usb_submit_urb() failed with error %d\n", + __func__, result); } return; } @@ -325,8 +323,8 @@ static void send_data(struct work_struct *work) port->write_urb->transfer_buffer_length = count; result = usb_submit_urb(port->write_urb, GFP_NOIO); if (result != 0) { - dev_err_console(port, "%s(): usb_submit_urb() failed" - " with error %d\n", __func__, result); + dev_err_console(port, "%s(): usb_submit_urb() failed with error %d\n", + __func__, result); priv->flags.write_urb_in_use = 0; } @@ -420,10 +418,8 @@ static void oti6858_set_termios(struct tty_struct *tty, __le16 divisor; int br; - if (!tty) { - dbg("%s(): no tty structures", __func__); + if (!tty) return; - } cflag = tty->termios.c_cflag; @@ -560,11 +556,11 @@ static int oti6858_open(struct tty_struct *tty, struct usb_serial_port *port) spin_unlock_irqrestore(&priv->lock, flags); kfree(buf); - dbg("%s(): submitting interrupt urb", __func__); + dev_dbg(&port->dev, "%s(): submitting interrupt urb\n", __func__); result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); if (result != 0) { - dev_err(&port->dev, "%s(): usb_submit_urb() failed" - " with error %d\n", __func__, result); + dev_err(&port->dev, "%s(): usb_submit_urb() failed with error %d\n", + __func__, result); oti6858_close(port); return result; } @@ -586,14 +582,14 @@ static void oti6858_close(struct usb_serial_port *port) kfifo_reset_out(&port->write_fifo); spin_unlock_irqrestore(&port->lock, flags); - dbg("%s(): after buf_clear()", __func__); + dev_dbg(&port->dev, "%s(): after buf_clear()\n", __func__); /* cancel scheduled setup */ cancel_delayed_work_sync(&priv->delayed_setup_work); cancel_delayed_work_sync(&priv->delayed_write_work); /* shutdown our urbs */ - dbg("%s(): shutting down urbs", __func__); + dev_dbg(&port->dev, "%s(): shutting down urbs\n", __func__); usb_kill_urb(port->write_urb); usb_kill_urb(port->read_urb); usb_kill_urb(port->interrupt_in_urb); @@ -607,8 +603,8 @@ static int oti6858_tiocmset(struct tty_struct *tty, unsigned long flags; u8 control; - dbg("%s(port = %d, set = 0x%08x, clear = 0x%08x)", - __func__, port->number, set, clear); + dev_dbg(&port->dev, "%s(set = 0x%08x, clear = 0x%08x)\n", + __func__, set, clear); /* FIXME: check if this is correct (active high/low) */ spin_lock_irqsave(&priv->lock, flags); @@ -655,7 +651,7 @@ static int oti6858_tiocmget(struct tty_struct *tty) if ((pin_state & PIN_DCD) != 0) result |= TIOCM_CD; - dbg("%s() = 0x%08x", __func__, result); + dev_dbg(&port->dev, "%s() = 0x%08x\n", __func__, result); return result; } @@ -700,15 +696,14 @@ static int oti6858_ioctl(struct tty_struct *tty, { struct usb_serial_port *port = tty->driver_data; - dbg("%s(port = %d, cmd = 0x%04x, arg = 0x%08lx)", - __func__, port->number, cmd, arg); + dev_dbg(&port->dev, "%s(cmd = 0x%04x, arg = 0x%08lx)\n", __func__, cmd, arg); switch (cmd) { case TIOCMIWAIT: - dbg("%s(): TIOCMIWAIT", __func__); + dev_dbg(&port->dev, "%s(): TIOCMIWAIT\n", __func__); return wait_modem_info(port, arg); default: - dbg("%s(): 0x%04x not supported", __func__, cmd); + dev_dbg(&port->dev, "%s(): 0x%04x not supported\n", __func__, cmd); break; } return -ENOIOCTLCMD; @@ -738,12 +733,12 @@ static void oti6858_read_int_callback(struct urb *urb) case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ - dbg("%s(): urb shutting down with status: %d", - __func__, status); + dev_dbg(&urb->dev->dev, "%s(): urb shutting down with status: %d\n", + __func__, status); return; default: - dbg("%s(): nonzero urb status received: %d", - __func__, status); + dev_dbg(&urb->dev->dev, "%s(): nonzero urb status received: %d\n", + __func__, status); break; } @@ -759,8 +754,7 @@ static void oti6858_read_int_callback(struct urb *urb) priv->transient = 4; priv->setup_done = 0; resubmit = 0; - dbg("%s(): scheduling setup_line()", - __func__); + dev_dbg(&port->dev, "%s(): scheduling setup_line()\n", __func__); schedule_delayed_work(&priv->delayed_setup_work, 0); } } @@ -774,8 +768,7 @@ static void oti6858_read_int_callback(struct urb *urb) priv->transient = 4; priv->setup_done = 0; resubmit = 0; - dbg("%s(): scheduling setup_line()", - __func__); + dev_dbg(&port->dev, "%s(): scheduling setup_line()\n", __func__); schedule_delayed_work(&priv->delayed_setup_work, 0); } } @@ -826,7 +819,7 @@ static void oti6858_read_int_callback(struct urb *urb) if (resubmit) { int result; -/* dbg("%s(): submitting interrupt urb", __func__); */ +/* dev_dbg(&urb->dev->dev, "%s(): submitting interrupt urb\n", __func__); */ result = usb_submit_urb(urb, GFP_ATOMIC); if (result != 0) { dev_err(&urb->dev->dev, @@ -851,7 +844,7 @@ static void oti6858_read_bulk_callback(struct urb *urb) spin_unlock_irqrestore(&priv->lock, flags); if (status != 0) { - dbg("%s(): unable to handle the error, exiting", __func__); + dev_dbg(&urb->dev->dev, "%s(): unable to handle the error, exiting\n", __func__); return; } @@ -885,15 +878,13 @@ static void oti6858_write_bulk_callback(struct urb *urb) case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ - dbg("%s(): urb shutting down with status: %d", - __func__, status); + dev_dbg(&urb->dev->dev, "%s(): urb shutting down with status: %d\n", __func__, status); priv->flags.write_urb_in_use = 0; return; default: /* error in the urb, so we have to resubmit it */ - dbg("%s(): nonzero write bulk status received: %d", - __func__, status); - dbg("%s(): overflow in write", __func__); + dev_dbg(&urb->dev->dev, "%s(): nonzero write bulk status received: %d\n", __func__, status); + dev_dbg(&urb->dev->dev, "%s(): overflow in write\n", __func__); port->write_urb->transfer_buffer_length = 1; result = usb_submit_urb(port->write_urb, GFP_ATOMIC); @@ -908,7 +899,7 @@ static void oti6858_write_bulk_callback(struct urb *urb) priv->flags.write_urb_in_use = 0; /* schedule the interrupt urb if we are still open */ - dbg("%s(): submitting interrupt urb", __func__); + dev_dbg(&port->dev, "%s(): submitting interrupt urb\n", __func__); result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC); if (result != 0) { dev_err(&port->dev, "%s(): failed submitting int urb," @@ -922,7 +913,3 @@ MODULE_DESCRIPTION(OTI6858_DESCRIPTION); MODULE_AUTHOR(OTI6858_AUTHOR); MODULE_VERSION(OTI6858_VERSION); MODULE_LICENSE("GPL"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "enable debug output"); - diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 2b9108a8ea64..892ebdc7a364 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -36,8 +36,6 @@ */ #define DRIVER_DESC "Prolific PL2303 USB to serial adaptor driver" -static bool debug; - static const struct usb_device_id id_table[] = { { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID) }, { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ2) }, @@ -741,7 +739,7 @@ static void pl2303_read_int_callback(struct urb *urb) goto exit; } - usb_serial_debug_data(debug, &port->dev, __func__, + usb_serial_debug_data(&port->dev, __func__, urb->actual_length, urb->transfer_buffer); pl2303_update_line_status(port, data, actual_length); @@ -839,7 +837,3 @@ module_usb_serial_driver(serial_drivers, id_table); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); - diff --git a/drivers/usb/serial/qcaux.c b/drivers/usb/serial/qcaux.c index a4edc7ee9c8a..9b1b96f2d095 100644 --- a/drivers/usb/serial/qcaux.c +++ b/drivers/usb/serial/qcaux.c @@ -36,8 +36,6 @@ #define UTSTARCOM_PRODUCT_UM175_V1 0x3712 #define UTSTARCOM_PRODUCT_UM175_V2 0x3714 #define UTSTARCOM_PRODUCT_UM175_ALLTEL 0x3715 -#define PANTECH_PRODUCT_UML190_VZW 0x3716 -#define PANTECH_PRODUCT_UML290_VZW 0x3718 /* CMOTECH devices */ #define CMOTECH_VENDOR_ID 0x16d8 @@ -68,11 +66,9 @@ static struct usb_device_id id_table[] = { { USB_DEVICE_AND_INTERFACE_INFO(LG_VENDOR_ID, LG_PRODUCT_VX4400_6000, 0xff, 0xff, 0x00) }, { USB_DEVICE_AND_INTERFACE_INFO(SANYO_VENDOR_ID, SANYO_PRODUCT_KATANA_LX, 0xff, 0xff, 0x00) }, { USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_U520, 0xff, 0x00, 0x00) }, - { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML190_VZW, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML190_VZW, 0xff, 0xfe, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML290_VZW, 0xff, 0xfd, 0xff) }, /* NMEA */ - { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML290_VZW, 0xff, 0xfe, 0xff) }, /* WMC */ - { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML290_VZW, 0xff, 0xff, 0xff) }, /* DIAG */ + { USB_VENDOR_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, 0xff, 0xfd, 0xff) }, /* NMEA */ + { USB_VENDOR_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, 0xff, 0xfe, 0xff) }, /* WMC */ + { USB_VENDOR_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, 0xff, 0xff, 0xff) }, /* DIAG */ { }, }; MODULE_DEVICE_TABLE(usb, id_table); diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index bfd50779f0c9..c3ddb65c05f2 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -22,8 +22,6 @@ #define DRIVER_AUTHOR "Qualcomm Inc" #define DRIVER_DESC "Qualcomm USB Serial driver" -static bool debug; - #define DEVICE_G1K(v, p) \ USB_DEVICE(v, p), .driver_info = 1 @@ -305,6 +303,3 @@ module_usb_serial_driver(serial_drivers, id_table); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL v2"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c index 7df9cdb053ed..2cdfdcc90b37 100644 --- a/drivers/usb/serial/quatech2.c +++ b/drivers/usb/serial/quatech2.c @@ -27,8 +27,6 @@ #include <linux/serial_reg.h> #include <linux/uaccess.h> -static bool debug; - /* default urb timeout for usb operations */ #define QT2_USB_TIMEOUT USB_CTRL_SET_TIMEOUT @@ -1089,7 +1087,7 @@ static int qt2_write(struct tty_struct *tty, data = write_urb->transfer_buffer; spin_lock_irqsave(&port_priv->urb_lock, flags); if (port_priv->urb_in_use == true) { - printk(KERN_INFO "qt2_write - urb is in use\n"); + dev_err(&port->dev, "qt2_write - urb is in use\n"); goto write_out; } @@ -1146,6 +1144,3 @@ module_usb_serial_driver(serial_drivers, id_table); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c index 36e9d9fc0618..c949ce6ef0c6 100644 --- a/drivers/usb/serial/safe_serial.c +++ b/drivers/usb/serial/safe_serial.c @@ -62,6 +62,7 @@ * */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include <linux/kernel.h> #include <linux/errno.h> @@ -81,11 +82,9 @@ #define CONFIG_USB_SERIAL_SAFE_PADDED 0 #endif -static bool debug; static bool safe = 1; static bool padded = CONFIG_USB_SERIAL_SAFE_PADDED; -#define DRIVER_VERSION "v0.1" #define DRIVER_AUTHOR "sl@lineo.com, tbr@lineo.com, Johan Hovold <jhovold@gmail.com>" #define DRIVER_DESC "USB Safe Encapsulated Serial" @@ -100,9 +99,6 @@ MODULE_PARM_DESC(vendor, "User specified USB idVendor (required)"); module_param(product, ushort, 0); MODULE_PARM_DESC(product, "User specified USB idProduct (required)"); -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); - module_param(safe, bool, 0); MODULE_PARM_DESC(safe, "Turn Safe Encapsulation On/Off"); @@ -315,13 +311,9 @@ static int __init safe_init(void) { int i; - printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":" - DRIVER_DESC "\n"); - /* if we have vendor / product parameters patch them into id list */ if (vendor || product) { - printk(KERN_INFO KBUILD_MODNAME ": vendor: %x product: %x\n", - vendor, product); + pr_info("vendor: %x product: %x\n", vendor, product); for (i = 0; i < ARRAY_SIZE(id_table); i++) { if (!id_table[i].idVendor && !id_table[i].idProduct) { diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index b14ebbd73567..01d882cf3775 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -46,7 +46,6 @@ allocations > PAGE_SIZE and the number of packets in a page is an integer 512 is the largest possible packet on EHCI */ -static bool debug; static bool nmea; /* Used in interface blacklisting */ @@ -518,7 +517,7 @@ static int sierra_write(struct tty_struct *tty, struct usb_serial_port *port, memcpy(buffer, buf, writesize); - usb_serial_debug_data(debug, &port->dev, __func__, writesize, buffer); + usb_serial_debug_data(&port->dev, __func__, writesize, buffer); usb_fill_bulk_urb(urb, serial->dev, usb_sndbulkpipe(serial->dev, @@ -595,8 +594,8 @@ static void sierra_indat_callback(struct urb *urb) tty_flip_buffer_push(tty); tty_kref_put(tty); - usb_serial_debug_data(debug, &port->dev, - __func__, urb->actual_length, data); + usb_serial_debug_data(&port->dev, __func__, + urb->actual_length, data); } } else { dev_dbg(&port->dev, "%s: empty read urb" @@ -765,7 +764,6 @@ static struct urb *sierra_setup_urb(struct usb_serial *serial, int endpoint, usb_sndbulkpipe(serial->dev, endpoint) | dir, buf, len, callback, ctx); - /* debug */ dev_dbg(&serial->dev->dev, "%s %c u : %p d:%p\n", __func__, dir == USB_DIR_IN ? 'i' : 'o', urb, buf); } else { @@ -1082,6 +1080,3 @@ MODULE_LICENSE("GPL"); module_param(nmea, bool, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(nmea, "NMEA streaming"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug messages"); diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c index ab68a4d74d61..9716efe92955 100644 --- a/drivers/usb/serial/spcp8x5.c +++ b/drivers/usb/serial/spcp8x5.c @@ -33,8 +33,6 @@ #define DRIVER_VERSION "v0.10" #define DRIVER_DESC "SPCP8x5 USB to serial adaptor driver" -static bool debug; - #define SPCP8x5_007_VID 0x04FC #define SPCP8x5_007_PID 0x0201 #define SPCP8x5_008_VID 0x04fc @@ -665,6 +663,3 @@ module_usb_serial_driver(serial_drivers, id_table); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_VERSION(DRIVER_VERSION); MODULE_LICENSE("GPL"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); diff --git a/drivers/usb/serial/ssu100.c b/drivers/usb/serial/ssu100.c index cf2d30cf7588..015810b3785b 100644 --- a/drivers/usb/serial/ssu100.c +++ b/drivers/usb/serial/ssu100.c @@ -46,8 +46,6 @@ #define FULLPWRBIT 0x00000080 #define NEXT_BOARD_POWER_BIT 0x00000004 -static bool debug; - /* Version Information */ #define DRIVER_VERSION "v0.1" #define DRIVER_DESC "Quatech SSU-100 USB to Serial Driver" @@ -135,7 +133,7 @@ static inline int update_mctrl(struct usb_device *dev, unsigned int set, int result; if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0) { - dbg("%s - DTR|RTS not being set|cleared", __func__); + dev_dbg(&dev->dev, "%s - DTR|RTS not being set|cleared\n", __func__); return 0; /* no change */ } @@ -148,7 +146,7 @@ static inline int update_mctrl(struct usb_device *dev, unsigned int set, result = ssu100_setregister(dev, 0, UART_MCR, urb_value); if (result < 0) - dbg("%s Error from MODEM_CTRL urb", __func__); + dev_dbg(&dev->dev, "%s Error from MODEM_CTRL urb\n", __func__); return result; } @@ -164,7 +162,7 @@ static int ssu100_initdevice(struct usb_device *dev) result = ssu100_getdevice(dev, data); if (result < 0) { - dbg("%s - get_device failed %i", __func__, result); + dev_dbg(&dev->dev, "%s - get_device failed %i\n", __func__, result); goto out; } @@ -172,25 +170,25 @@ static int ssu100_initdevice(struct usb_device *dev) result = ssu100_setdevice(dev, data); if (result < 0) { - dbg("%s - setdevice failed %i", __func__, result); + dev_dbg(&dev->dev, "%s - setdevice failed %i\n", __func__, result); goto out; } result = ssu100_control_msg(dev, QT_GET_SET_PREBUF_TRIG_LVL, 128, 0); if (result < 0) { - dbg("%s - set prebuffer level failed %i", __func__, result); + dev_dbg(&dev->dev, "%s - set prebuffer level failed %i\n", __func__, result); goto out; } result = ssu100_control_msg(dev, QT_SET_ATF, ATC_DISABLED, 0); if (result < 0) { - dbg("%s - set ATFprebuffer level failed %i", __func__, result); + dev_dbg(&dev->dev, "%s - set ATFprebuffer level failed %i\n", __func__, result); goto out; } result = ssu100_getdevice(dev, data); if (result < 0) { - dbg("%s - get_device failed %i", __func__, result); + dev_dbg(&dev->dev, "%s - get_device failed %i\n", __func__, result); goto out; } @@ -201,7 +199,7 @@ static int ssu100_initdevice(struct usb_device *dev) result = ssu100_setdevice(dev, data); if (result < 0) { - dbg("%s - setdevice failed %i", __func__, result); + dev_dbg(&dev->dev, "%s - setdevice failed %i\n", __func__, result); goto out; } @@ -249,7 +247,7 @@ static void ssu100_set_termios(struct tty_struct *tty, if (!baud) baud = 9600; - dbg("%s - got baud = %d\n", __func__, baud); + dev_dbg(&port->dev, "%s - got baud = %d\n", __func__, baud); divisor = MAX_BAUD_RATE / baud; @@ -261,7 +259,7 @@ static void ssu100_set_termios(struct tty_struct *tty, result = ssu100_control_msg(dev, QT_GET_SET_UART, divisor, urb_value); if (result < 0) - dbg("%s - set uart failed", __func__); + dev_dbg(&port->dev, "%s - set uart failed\n", __func__); if (cflag & CRTSCTS) result = ssu100_control_msg(dev, QT_HW_FLOW_CONTROL_MASK, @@ -270,7 +268,7 @@ static void ssu100_set_termios(struct tty_struct *tty, result = ssu100_control_msg(dev, QT_HW_FLOW_CONTROL_MASK, 0, 0); if (result < 0) - dbg("%s - set HW flow control failed", __func__); + dev_dbg(&port->dev, "%s - set HW flow control failed\n", __func__); if (I_IXOFF(tty) || I_IXON(tty)) { u16 x = ((u16)(START_CHAR(tty) << 8) | (u16)(STOP_CHAR(tty))); @@ -282,7 +280,7 @@ static void ssu100_set_termios(struct tty_struct *tty, 0, 0); if (result < 0) - dbg("%s - set SW flow control failed", __func__); + dev_dbg(&port->dev, "%s - set SW flow control failed\n", __func__); } @@ -304,7 +302,7 @@ static int ssu100_open(struct tty_struct *tty, struct usb_serial_port *port) QT_TRANSFER_IN, 0x01, 0, data, 2, 300); if (result < 0) { - dbg("%s - open failed %i", __func__, result); + dev_dbg(&port->dev, "%s - open failed %i\n", __func__, result); kfree(data); return result; } @@ -319,7 +317,7 @@ static int ssu100_open(struct tty_struct *tty, struct usb_serial_port *port) /* set to 9600 */ result = ssu100_control_msg(dev, QT_GET_SET_UART, 0x30, 0x0300); if (result < 0) - dbg("%s - set uart failed", __func__); + dev_dbg(&port->dev, "%s - set uart failed\n", __func__); if (tty) ssu100_set_termios(tty, port, &tty->termios); @@ -423,7 +421,7 @@ static int ssu100_ioctl(struct tty_struct *tty, { struct usb_serial_port *port = tty->driver_data; - dbg("%s cmd 0x%04x", __func__, cmd); + dev_dbg(&port->dev, "%s cmd 0x%04x\n", __func__, cmd); switch (cmd) { case TIOCGSERIAL: @@ -437,7 +435,7 @@ static int ssu100_ioctl(struct tty_struct *tty, break; } - dbg("%s arg not supported", __func__); + dev_dbg(&port->dev, "%s arg not supported\n", __func__); return -ENOIOCTLCMD; } @@ -668,6 +666,3 @@ module_usb_serial_driver(serial_drivers, id_table); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); diff --git a/drivers/usb/serial/symbolserial.c b/drivers/usb/serial/symbolserial.c index e53d2aac35c5..701fffa8431f 100644 --- a/drivers/usb/serial/symbolserial.c +++ b/drivers/usb/serial/symbolserial.c @@ -20,8 +20,6 @@ #include <linux/usb/serial.h> #include <linux/uaccess.h> -static bool debug; - static const struct usb_device_id id_table[] = { { USB_DEVICE(0x05e0, 0x0600) }, { }, @@ -71,8 +69,7 @@ static void symbol_int_callback(struct urb *urb) goto exit; } - usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, - data); + usb_serial_debug_data(&port->dev, __func__, urb->actual_length, data); if (urb->actual_length > 1) { data_length = urb->actual_length - 1; @@ -292,6 +289,3 @@ static struct usb_serial_driver * const serial_drivers[] = { module_usb_serial_driver(serial_drivers, id_table); MODULE_LICENSE("GPL"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index f502a16aac21..6f49392cda5b 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -40,7 +40,6 @@ /* Defines */ -#define TI_DRIVER_VERSION "v0.10" #define TI_DRIVER_AUTHOR "Al Borchers <alborchers@steinerpoint.com>" #define TI_DRIVER_DESC "TI USB 3410/5052 Serial Driver" @@ -141,8 +140,8 @@ static int ti_command_out_sync(struct ti_device *tdev, __u8 command, static int ti_command_in_sync(struct ti_device *tdev, __u8 command, __u16 moduleid, __u16 value, __u8 *data, int size); -static int ti_write_byte(struct ti_device *tdev, unsigned long addr, - __u8 mask, __u8 byte); +static int ti_write_byte(struct usb_serial_port *port, struct ti_device *tdev, + unsigned long addr, __u8 mask, __u8 byte); static int ti_download_firmware(struct ti_device *tdev); @@ -150,7 +149,6 @@ static int ti_download_firmware(struct ti_device *tdev); /* Data */ /* module parameters */ -static bool debug; static int closing_wait = TI_DEFAULT_CLOSING_WAIT; static ushort vendor_3410[TI_EXTRA_VID_PID_COUNT]; static unsigned int vendor_3410_count; @@ -277,7 +275,6 @@ static struct usb_serial_driver * const serial_drivers[] = { MODULE_AUTHOR(TI_DRIVER_AUTHOR); MODULE_DESCRIPTION(TI_DRIVER_DESC); -MODULE_VERSION(TI_DRIVER_VERSION); MODULE_LICENSE("GPL"); MODULE_FIRMWARE("ti_3410.fw"); @@ -288,9 +285,6 @@ MODULE_FIRMWARE("mts_edge.fw"); MODULE_FIRMWARE("mts_mt9234mu.fw"); MODULE_FIRMWARE("mts_mt9234zba.fw"); -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Enable debugging, 0=no, 1=yes"); - module_param(closing_wait, int, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(closing_wait, "Maximum wait for data to drain in close, in .01 secs, default is 4000"); @@ -316,7 +310,6 @@ MODULE_DEVICE_TABLE(usb, ti_id_table_combined); static int __init ti_init(void) { int i, j, c; - int ret; /* insert extra vendor and product ids */ c = ARRAY_SIZE(ti_id_table_combined) - 2 * TI_EXTRA_VID_PID_COUNT - 1; @@ -339,11 +332,7 @@ static int __init ti_init(void) ti_id_table_combined[c].match_flags = USB_DEVICE_ID_MATCH_DEVICE; } - ret = usb_serial_register_drivers(serial_drivers, KBUILD_MODNAME, ti_id_table_combined); - if (ret == 0) - printk(KERN_INFO KBUILD_MODNAME ": " TI_DRIVER_VERSION ":" - TI_DRIVER_DESC "\n"); - return ret; + return usb_serial_register_drivers(serial_drivers, KBUILD_MODNAME, ti_id_table_combined); } static void __exit ti_exit(void) @@ -364,10 +353,11 @@ static int ti_startup(struct usb_serial *serial) int i; - dbg("%s - product 0x%4X, num configurations %d, configuration value %d", - __func__, le16_to_cpu(dev->descriptor.idProduct), - dev->descriptor.bNumConfigurations, - dev->actconfig->desc.bConfigurationValue); + dev_dbg(&dev->dev, + "%s - product 0x%4X, num configurations %d, configuration value %d", + __func__, le16_to_cpu(dev->descriptor.idProduct), + dev->descriptor.bNumConfigurations, + dev->actconfig->desc.bConfigurationValue); /* create device structure */ tdev = kzalloc(sizeof(struct ti_device), GFP_KERNEL); @@ -382,8 +372,8 @@ static int ti_startup(struct usb_serial *serial) /* determine device type */ if (usb_match_id(serial->interface, ti_id_table_3410)) tdev->td_is_3410 = 1; - dbg("%s - device type is %s", __func__, - tdev->td_is_3410 ? "3410" : "5052"); + dev_dbg(&dev->dev, "%s - device type is %s\n", __func__, + tdev->td_is_3410 ? "3410" : "5052"); /* if we have only 1 configuration, download firmware */ if (dev->descriptor.bNumConfigurations == 1) { @@ -501,20 +491,17 @@ static int ti_open(struct tty_struct *tty, struct usb_serial_port *port) /* start interrupt urb the first time a port is opened on this device */ if (tdev->td_open_port_count == 0) { - dbg("%s - start interrupt in urb", __func__); + dev_dbg(&port->dev, "%s - start interrupt in urb\n", __func__); urb = tdev->td_serial->port[0]->interrupt_in_urb; if (!urb) { - dev_err(&port->dev, "%s - no interrupt urb\n", - __func__); + dev_err(&port->dev, "%s - no interrupt urb\n", __func__); status = -EINVAL; goto release_lock; } urb->context = tdev; status = usb_submit_urb(urb, GFP_KERNEL); if (status) { - dev_err(&port->dev, - "%s - submit interrupt urb failed, %d\n", - __func__, status); + dev_err(&port->dev, "%s - submit interrupt urb failed, %d\n", __func__, status); goto release_lock; } } @@ -522,16 +509,16 @@ static int ti_open(struct tty_struct *tty, struct usb_serial_port *port) if (tty) ti_set_termios(tty, port, &tty->termios); - dbg("%s - sending TI_OPEN_PORT", __func__); + dev_dbg(&port->dev, "%s - sending TI_OPEN_PORT\n", __func__); status = ti_command_out_sync(tdev, TI_OPEN_PORT, (__u8)(TI_UART1_PORT + port_number), open_settings, NULL, 0); if (status) { dev_err(&port->dev, "%s - cannot send open command, %d\n", - __func__, status); + __func__, status); goto unlink_int_urb; } - dbg("%s - sending TI_START_PORT", __func__); + dev_dbg(&port->dev, "%s - sending TI_START_PORT\n", __func__); status = ti_command_out_sync(tdev, TI_START_PORT, (__u8)(TI_UART1_PORT + port_number), 0, NULL, 0); if (status) { @@ -540,7 +527,7 @@ static int ti_open(struct tty_struct *tty, struct usb_serial_port *port) goto unlink_int_urb; } - dbg("%s - sending TI_PURGE_PORT", __func__); + dev_dbg(&port->dev, "%s - sending TI_PURGE_PORT\n", __func__); status = ti_command_out_sync(tdev, TI_PURGE_PORT, (__u8)(TI_UART1_PORT + port_number), TI_PURGE_INPUT, NULL, 0); if (status) { @@ -564,7 +551,7 @@ static int ti_open(struct tty_struct *tty, struct usb_serial_port *port) if (tty) ti_set_termios(tty, port, &tty->termios); - dbg("%s - sending TI_OPEN_PORT (2)", __func__); + dev_dbg(&port->dev, "%s - sending TI_OPEN_PORT (2)\n", __func__); status = ti_command_out_sync(tdev, TI_OPEN_PORT, (__u8)(TI_UART1_PORT + port_number), open_settings, NULL, 0); if (status) { @@ -573,7 +560,7 @@ static int ti_open(struct tty_struct *tty, struct usb_serial_port *port) goto unlink_int_urb; } - dbg("%s - sending TI_START_PORT (2)", __func__); + dev_dbg(&port->dev, "%s - sending TI_START_PORT (2)\n", __func__); status = ti_command_out_sync(tdev, TI_START_PORT, (__u8)(TI_UART1_PORT + port_number), 0, NULL, 0); if (status) { @@ -583,7 +570,7 @@ static int ti_open(struct tty_struct *tty, struct usb_serial_port *port) } /* start read urb */ - dbg("%s - start read urb", __func__); + dev_dbg(&port->dev, "%s - start read urb\n", __func__); urb = port->read_urb; if (!urb) { dev_err(&port->dev, "%s - no read urb\n", __func__); @@ -609,7 +596,7 @@ unlink_int_urb: usb_kill_urb(port->serial->port[0]->interrupt_in_urb); release_lock: mutex_unlock(&tdev->td_open_close_lock); - dbg("%s - exit %d", __func__, status); + dev_dbg(&port->dev, "%s - exit %d\n", __func__, status); return status; } @@ -637,7 +624,7 @@ static void ti_close(struct usb_serial_port *port) port_number = port->number - port->serial->minor; - dbg("%s - sending TI_CLOSE_PORT", __func__); + dev_dbg(&port->dev, "%s - sending TI_CLOSE_PORT\n", __func__); status = ti_command_out_sync(tdev, TI_CLOSE_PORT, (__u8)(TI_UART1_PORT + port_number), 0, NULL, 0); if (status) @@ -664,7 +651,7 @@ static int ti_write(struct tty_struct *tty, struct usb_serial_port *port, struct ti_port *tport = usb_get_serial_port_data(port); if (count == 0) { - dbg("%s - write request of 0 bytes", __func__); + dev_dbg(&port->dev, "%s - write request of 0 bytes\n", __func__); return 0; } @@ -693,7 +680,7 @@ static int ti_write_room(struct tty_struct *tty) room = kfifo_avail(&tport->write_fifo); spin_unlock_irqrestore(&tport->tp_lock, flags); - dbg("%s - returns %d", __func__, room); + dev_dbg(&port->dev, "%s - returns %d\n", __func__, room); return room; } @@ -712,7 +699,7 @@ static int ti_chars_in_buffer(struct tty_struct *tty) chars = kfifo_len(&tport->write_fifo); spin_unlock_irqrestore(&tport->tp_lock, flags); - dbg("%s - returns %d", __func__, chars); + dev_dbg(&port->dev, "%s - returns %d\n", __func__, chars); return chars; } @@ -755,8 +742,7 @@ static int ti_get_icount(struct tty_struct *tty, struct ti_port *tport = usb_get_serial_port_data(port); struct async_icount cnow = tport->tp_icount; - dbg("%s - (%d) TIOCGICOUNT RX=%d, TX=%d", - __func__, port->number, + dev_dbg(&port->dev, "%s - TIOCGICOUNT RX=%d, TX=%d\n", __func__, cnow.rx, cnow.tx); icount->cts = cnow.cts; @@ -782,22 +768,22 @@ static int ti_ioctl(struct tty_struct *tty, struct async_icount cnow; struct async_icount cprev; - dbg("%s - port %d, cmd = 0x%04X", __func__, port->number, cmd); + dev_dbg(&port->dev, "%s - cmd = 0x%04X\n", __func__, cmd); if (tport == NULL) return -ENODEV; switch (cmd) { case TIOCGSERIAL: - dbg("%s - (%d) TIOCGSERIAL", __func__, port->number); + dev_dbg(&port->dev, "%s - TIOCGSERIAL\n", __func__); return ti_get_serial_info(tport, (struct serial_struct __user *)arg); case TIOCSSERIAL: - dbg("%s - (%d) TIOCSSERIAL", __func__, port->number); + dev_dbg(&port->dev, "%s - TIOCSSERIAL\n", __func__); return ti_set_serial_info(tty, tport, (struct serial_struct __user *)arg); case TIOCMIWAIT: - dbg("%s - (%d) TIOCMIWAIT", __func__, port->number); + dev_dbg(&port->dev, "%s - TIOCMIWAIT\n", __func__); cprev = tport->tp_icount; while (1) { interruptible_sleep_on(&tport->tp_msr_wait); @@ -834,9 +820,9 @@ static void ti_set_termios(struct tty_struct *tty, cflag = tty->termios.c_cflag; iflag = tty->termios.c_iflag; - dbg("%s - cflag %08x, iflag %08x", __func__, cflag, iflag); - dbg("%s - old clfag %08x, old iflag %08x", __func__, - old_termios->c_cflag, old_termios->c_iflag); + dev_dbg(&port->dev, "%s - cflag %08x, iflag %08x\n", __func__, cflag, iflag); + dev_dbg(&port->dev, "%s - old clfag %08x, old iflag %08x\n", __func__, + old_termios->c_cflag, old_termios->c_iflag); if (tport == NULL) return; @@ -926,8 +912,11 @@ static void ti_set_termios(struct tty_struct *tty, if ((cflag & CBAUD) != B0) tty_encode_baud_rate(tty, baud, baud); - dbg("%s - BaudRate=%d, wBaudRate=%d, wFlags=0x%04X, bDataBits=%d, bParity=%d, bStopBits=%d, cXon=%d, cXoff=%d, bUartMode=%d", - __func__, baud, config->wBaudRate, config->wFlags, config->bDataBits, config->bParity, config->bStopBits, config->cXon, config->cXoff, config->bUartMode); + dev_dbg(&port->dev, + "%s - BaudRate=%d, wBaudRate=%d, wFlags=0x%04X, bDataBits=%d, bParity=%d, bStopBits=%d, cXon=%d, cXoff=%d, bUartMode=%d", + __func__, baud, config->wBaudRate, config->wFlags, + config->bDataBits, config->bParity, config->bStopBits, + config->cXon, config->cXoff, config->bUartMode); cpu_to_be16s(&config->wBaudRate); cpu_to_be16s(&config->wFlags); @@ -979,7 +968,7 @@ static int ti_tiocmget(struct tty_struct *tty) | ((msr & TI_MSR_RI) ? TIOCM_RI : 0) | ((msr & TI_MSR_DSR) ? TIOCM_DSR : 0); - dbg("%s - 0x%04X", __func__, result); + dev_dbg(&port->dev, "%s - 0x%04X\n", __func__, result); return result; } @@ -1024,19 +1013,19 @@ static void ti_break(struct tty_struct *tty, int break_state) struct ti_port *tport = usb_get_serial_port_data(port); int status; - dbg("%s - state = %d", __func__, break_state); + dev_dbg(&port->dev, "%s - state = %d\n", __func__, break_state); if (tport == NULL) return; ti_drain(tport, (tport->tp_closing_wait*HZ)/100, 0); - status = ti_write_byte(tport->tp_tdev, + status = ti_write_byte(port, tport->tp_tdev, tport->tp_uart_base_addr + TI_UART_OFFSET_LCR, TI_LCR_BREAK, break_state == -1 ? TI_LCR_BREAK : 0); if (status) - dbg("%s - error setting break, %d", __func__, status); + dev_dbg(&port->dev, "%s - error setting break, %d\n", __func__, status); } @@ -1061,18 +1050,17 @@ static void ti_interrupt_callback(struct urb *urb) case -ECONNRESET: case -ENOENT: case -ESHUTDOWN: - dbg("%s - urb shutting down, %d", __func__, status); + dev_dbg(dev, "%s - urb shutting down, %d\n", __func__, status); tdev->td_urb_error = 1; return; default: - dev_err(dev, "%s - nonzero urb status, %d\n", - __func__, status); + dev_err(dev, "%s - nonzero urb status, %d\n", __func__, status); tdev->td_urb_error = 1; goto exit; } if (length != 2) { - dbg("%s - bad packet size, %d", __func__, length); + dev_dbg(dev, "%s - bad packet size, %d\n", __func__, length); goto exit; } @@ -1084,8 +1072,8 @@ static void ti_interrupt_callback(struct urb *urb) port_number = TI_GET_PORT_FROM_CODE(data[0]); function = TI_GET_FUNC_FROM_CODE(data[0]); - dbg("%s - port_number %d, function %d, data 0x%02X", - __func__, port_number, function, data[1]); + dev_dbg(dev, "%s - port_number %d, function %d, data 0x%02X\n", + __func__, port_number, function, data[1]); if (port_number >= serial->num_ports) { dev_err(dev, "%s - bad port number, %d\n", @@ -1102,12 +1090,12 @@ static void ti_interrupt_callback(struct urb *urb) switch (function) { case TI_CODE_DATA_ERROR: dev_err(dev, "%s - DATA ERROR, port %d, data 0x%02X\n", - __func__, port_number, data[1]); + __func__, port_number, data[1]); break; case TI_CODE_MODEM_STATUS: msr = data[1]; - dbg("%s - port %d, msr 0x%02X", __func__, port_number, msr); + dev_dbg(dev, "%s - port %d, msr 0x%02X\n", __func__, port_number, msr); ti_handle_new_msr(tport, msr); break; @@ -1140,7 +1128,7 @@ static void ti_bulk_in_callback(struct urb *urb) case -ECONNRESET: case -ENOENT: case -ESHUTDOWN: - dbg("%s - urb shutting down, %d", __func__, status); + dev_dbg(dev, "%s - urb shutting down, %d\n", __func__, status); tport->tp_tdev->td_urb_error = 1; wake_up_interruptible(&tport->tp_write_wait); return; @@ -1162,11 +1150,11 @@ static void ti_bulk_in_callback(struct urb *urb) tty = tty_port_tty_get(&port->port); if (tty) { if (urb->actual_length) { - usb_serial_debug_data(debug, dev, __func__, - urb->actual_length, urb->transfer_buffer); + usb_serial_debug_data(dev, __func__, urb->actual_length, + urb->transfer_buffer); if (!tport->tp_is_open) - dbg("%s - port closed, dropping data", + dev_dbg(dev, "%s - port closed, dropping data\n", __func__); else ti_recv(&urb->dev->dev, tty, @@ -1208,7 +1196,7 @@ static void ti_bulk_out_callback(struct urb *urb) case -ECONNRESET: case -ENOENT: case -ESHUTDOWN: - dbg("%s - urb shutting down, %d", __func__, status); + dev_dbg(&port->dev, "%s - urb shutting down, %d\n", __func__, status); tport->tp_tdev->td_urb_error = 1; wake_up_interruptible(&tport->tp_write_wait); return; @@ -1268,8 +1256,8 @@ static void ti_send(struct ti_port *tport) spin_unlock_irqrestore(&tport->tp_lock, flags); - usb_serial_debug_data(debug, &port->dev, __func__, count, - port->write_urb->transfer_buffer); + usb_serial_debug_data(&port->dev, __func__, count, + port->write_urb->transfer_buffer); usb_fill_bulk_urb(port->write_urb, port->serial->dev, usb_sndbulkpipe(port->serial->dev, @@ -1307,7 +1295,7 @@ static int ti_set_mcr(struct ti_port *tport, unsigned int mcr) unsigned long flags; int status; - status = ti_write_byte(tport->tp_tdev, + status = ti_write_byte(tport->tp_port, tport->tp_tdev, tport->tp_uart_base_addr + TI_UART_OFFSET_MCR, TI_MCR_RTS | TI_MCR_DTR | TI_MCR_LOOP, mcr); @@ -1344,7 +1332,7 @@ static int ti_get_lsr(struct ti_port *tport) goto free_data; } - dbg("%s - lsr 0x%02X", __func__, data->bLSR); + dev_dbg(&port->dev, "%s - lsr 0x%02X\n", __func__, data->bLSR); tport->tp_lsr = data->bLSR; @@ -1401,7 +1389,7 @@ static void ti_handle_new_msr(struct ti_port *tport, __u8 msr) struct tty_struct *tty; unsigned long flags; - dbg("%s - msr 0x%02X", __func__, msr); + dev_dbg(&tport->tp_port->dev, "%s - msr 0x%02X\n", __func__, msr); if (msr & TI_MSR_DELTA_MASK) { spin_lock_irqsave(&tport->tp_lock, flags); @@ -1560,21 +1548,21 @@ static int ti_command_in_sync(struct ti_device *tdev, __u8 command, } -static int ti_write_byte(struct ti_device *tdev, unsigned long addr, - __u8 mask, __u8 byte) +static int ti_write_byte(struct usb_serial_port *port, + struct ti_device *tdev, unsigned long addr, + __u8 mask, __u8 byte) { int status; unsigned int size; struct ti_write_data_bytes *data; - struct device *dev = &tdev->td_serial->dev->dev; - dbg("%s - addr 0x%08lX, mask 0x%02X, byte 0x%02X", - __func__, addr, mask, byte); + dev_dbg(&port->dev, "%s - addr 0x%08lX, mask 0x%02X, byte 0x%02X\n", __func__, + addr, mask, byte); size = sizeof(struct ti_write_data_bytes) + 2; data = kmalloc(size, GFP_KERNEL); if (!data) { - dev_err(dev, "%s - out of memory\n", __func__); + dev_err(&port->dev, "%s - out of memory\n", __func__); return -ENOMEM; } @@ -1590,7 +1578,7 @@ static int ti_write_byte(struct ti_device *tdev, unsigned long addr, (__u8 *)data, size); if (status < 0) - dev_err(dev, "%s - failed, %d\n", __func__, status); + dev_err(&port->dev, "%s - failed, %d\n", __func__, status); kfree(data); @@ -1615,7 +1603,7 @@ static int ti_do_download(struct usb_device *dev, int pipe, - sizeof(struct ti_firmware_header))); header->bCheckSum = cs; - dbg("%s - downloading firmware", __func__); + dev_dbg(&dev->dev, "%s - downloading firmware\n", __func__); for (pos = 0; pos < size; pos += done) { len = min(size - pos, TI_DOWNLOAD_MAX_PACKET_SIZE); status = usb_bulk_msg(dev, pipe, buffer + pos, len, @@ -1691,7 +1679,7 @@ static int ti_download_firmware(struct ti_device *tdev) status = ti_do_download(dev, pipe, buffer, fw_p->size); kfree(buffer); } else { - dbg("%s ENOMEM\n", __func__); + dev_dbg(&dev->dev, "%s ENOMEM\n", __func__); status = -ENOMEM; } release_firmware(fw_p); @@ -1701,7 +1689,7 @@ static int ti_download_firmware(struct ti_device *tdev) return status; } - dbg("%s - download successful", __func__); + dev_dbg(&dev->dev, "%s - download successful\n", __func__); return 0; } diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index aa4b0d775992..73b8e0569164 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -17,6 +17,8 @@ * */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/kernel.h> #include <linux/errno.h> #include <linux/init.h> @@ -37,10 +39,7 @@ #include <linux/kfifo.h> #include "pl2303.h" -/* - * Version Information - */ -#define DRIVER_AUTHOR "Greg Kroah-Hartman, greg@kroah.com, http://www.kroah.com/linux/" +#define DRIVER_AUTHOR "Greg Kroah-Hartman <gregkh@linuxfoundation.org>" #define DRIVER_DESC "USB Serial Driver core" /* There is no MODULE_DEVICE_TABLE for usbserial.c. Instead @@ -50,7 +49,6 @@ drivers depend on it. */ -static bool debug; /* initially all NULL */ static struct usb_serial *serial_table[SERIAL_TTY_MINORS]; static DEFINE_MUTEX(table_lock); @@ -87,7 +85,7 @@ static struct usb_serial *get_free_serial(struct usb_serial *serial, unsigned int i, j; int good_spot; - dbg("%s %d", __func__, num_ports); + dev_dbg(&serial->interface->dev, "%s %d\n", __func__, num_ports); *minor = 0; mutex_lock(&table_lock); @@ -107,7 +105,7 @@ static struct usb_serial *get_free_serial(struct usb_serial *serial, *minor = i; j = 0; - dbg("%s - minor base = %d", __func__, *minor); + dev_dbg(&serial->interface->dev, "%s - minor base = %d\n", __func__, *minor); for (i = *minor; (i < (*minor + num_ports)) && (i < SERIAL_TTY_MINORS); ++i) { serial_table[i] = serial; serial->port[j++]->number = i; @@ -123,8 +121,6 @@ static void return_serial(struct usb_serial *serial) { int i; - dbg("%s", __func__); - mutex_lock(&table_lock); for (i = 0; i < serial->num_ports; ++i) serial_table[serial->minor + i] = NULL; @@ -139,8 +135,6 @@ static void destroy_serial(struct kref *kref) serial = to_usb_serial(kref); - dbg("%s - %s", __func__, serial->type->description); - /* return the minor range that this device had */ if (serial->minor != SERIAL_TTY_NO_MINOR) return_serial(serial); @@ -191,8 +185,6 @@ static int serial_install(struct tty_driver *driver, struct tty_struct *tty) struct usb_serial_port *port; int retval = -ENODEV; - dbg("%s", __func__); - serial = usb_serial_get_by_index(idx); if (!serial) return retval; @@ -256,7 +248,7 @@ static int serial_open(struct tty_struct *tty, struct file *filp) { struct usb_serial_port *port = tty->driver_data; - dbg("%s - port %d", __func__, port->number); + dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number); return tty_port_open(&port->port, tty, filp); } @@ -287,14 +279,16 @@ static void serial_down(struct tty_port *tport) static void serial_hangup(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; - dbg("%s - port %d", __func__, port->number); + + dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number); tty_port_hangup(&port->port); } static void serial_close(struct tty_struct *tty, struct file *filp) { struct usb_serial_port *port = tty->driver_data; - dbg("%s - port %d", __func__, port->number); + + dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number); tty_port_close(&port->port, tty, filp); } @@ -319,7 +313,7 @@ static void serial_cleanup(struct tty_struct *tty) if (port->port.console) return; - dbg("%s - port %d", __func__, port->number); + dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number); tty->driver_data = NULL; @@ -344,7 +338,8 @@ static int serial_write(struct tty_struct *tty, const unsigned char *buf, if (port->serial->dev->state == USB_STATE_NOTATTACHED) goto exit; - dbg("%s - port %d, %d byte(s)", __func__, port->number, count); + dev_dbg(tty->dev, "%s - port %d, %d byte(s)\n", __func__, + port->number, count); /* pass on to the driver specific version of this function */ retval = port->serial->type->write(tty, port, buf, count); @@ -357,7 +352,8 @@ exit: static int serial_write_room(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; - dbg("%s - port %d", __func__, port->number); + + dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number); /* pass on to the driver specific version of this function */ return port->serial->type->write_room(tty); } @@ -365,7 +361,8 @@ static int serial_write_room(struct tty_struct *tty) static int serial_chars_in_buffer(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; - dbg("%s - port %d", __func__, port->number); + + dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number); /* if the device was unplugged then any remaining characters fell out of the connector ;) */ @@ -378,7 +375,8 @@ static int serial_chars_in_buffer(struct tty_struct *tty) static void serial_throttle(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; - dbg("%s - port %d", __func__, port->number); + + dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number); /* pass on to the driver specific version of this function */ if (port->serial->type->throttle) @@ -388,7 +386,8 @@ static void serial_throttle(struct tty_struct *tty) static void serial_unthrottle(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; - dbg("%s - port %d", __func__, port->number); + + dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number); /* pass on to the driver specific version of this function */ if (port->serial->type->unthrottle) @@ -401,7 +400,8 @@ static int serial_ioctl(struct tty_struct *tty, struct usb_serial_port *port = tty->driver_data; int retval = -ENODEV; - dbg("%s - port %d, cmd 0x%.4x", __func__, port->number, cmd); + dev_dbg(tty->dev, "%s - port %d, cmd 0x%.4x\n", __func__, + port->number, cmd); /* pass on to the driver specific version of this function if it is available */ @@ -415,7 +415,8 @@ static int serial_ioctl(struct tty_struct *tty, static void serial_set_termios(struct tty_struct *tty, struct ktermios *old) { struct usb_serial_port *port = tty->driver_data; - dbg("%s - port %d", __func__, port->number); + + dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number); /* pass on to the driver specific version of this function if it is available */ @@ -429,7 +430,7 @@ static int serial_break(struct tty_struct *tty, int break_state) { struct usb_serial_port *port = tty->driver_data; - dbg("%s - port %d", __func__, port->number); + dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number); /* pass on to the driver specific version of this function if it is available */ @@ -444,7 +445,6 @@ static int serial_proc_show(struct seq_file *m, void *v) int i; char tmp[40]; - dbg("%s", __func__); seq_puts(m, "usbserinfo:1.0 driver:2.0\n"); for (i = 0; i < SERIAL_TTY_MINORS; ++i) { serial = usb_serial_get_by_index(i); @@ -489,7 +489,7 @@ static int serial_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; - dbg("%s - port %d", __func__, port->number); + dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number); if (port->serial->type->tiocmget) return port->serial->type->tiocmget(tty); @@ -501,7 +501,7 @@ static int serial_tiocmset(struct tty_struct *tty, { struct usb_serial_port *port = tty->driver_data; - dbg("%s - port %d", __func__, port->number); + dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number); if (port->serial->type->tiocmset) return port->serial->type->tiocmset(tty, set, clear); @@ -513,7 +513,7 @@ static int serial_get_icount(struct tty_struct *tty, { struct usb_serial_port *port = tty->driver_data; - dbg("%s - port %d", __func__, port->number); + dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number); if (port->serial->type->get_icount) return port->serial->type->get_icount(tty, icount); @@ -537,12 +537,12 @@ static void usb_serial_port_work(struct work_struct *work) container_of(work, struct usb_serial_port, work); struct tty_struct *tty; - dbg("%s - port %d", __func__, port->number); - tty = tty_port_tty_get(&port->port); if (!tty) return; + dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number); + tty_wakeup(tty); tty_kref_put(tty); } @@ -575,7 +575,7 @@ static void port_release(struct device *dev) struct usb_serial_port *port = to_usb_serial_port(dev); int i; - dbg ("%s - %s", __func__, dev_name(dev)); + dev_dbg(dev, "%s\n", __func__); /* * Stop all the traffic before cancelling the work, so that @@ -644,12 +644,12 @@ static const struct usb_device_id *get_iface_id(struct usb_serial_driver *drv, id = usb_match_id(intf, drv->id_table); if (id) { - dbg("static descriptor matches"); + dev_dbg(&intf->dev, "static descriptor matches\n"); goto exit; } id = match_dynamic_id(intf, drv); if (id) - dbg("dynamic descriptor matches"); + dev_dbg(&intf->dev, "dynamic descriptor matches\n"); exit: return id; } @@ -703,6 +703,7 @@ static const struct tty_port_operations serial_port_ops = { static int usb_serial_probe(struct usb_interface *interface, const struct usb_device_id *id) { + struct device *ddev = &interface->dev; struct usb_device *dev = interface_to_usbdev(interface); struct usb_serial *serial = NULL; struct usb_serial_port *port; @@ -729,13 +730,13 @@ static int usb_serial_probe(struct usb_interface *interface, type = search_serial_device(interface); if (!type) { mutex_unlock(&table_lock); - dbg("none matched"); + dev_dbg(ddev, "none matched\n"); return -ENODEV; } if (!try_module_get(type->driver.owner)) { mutex_unlock(&table_lock); - dev_err(&interface->dev, "module get failed, exiting\n"); + dev_err(ddev, "module get failed, exiting\n"); return -EIO; } mutex_unlock(&table_lock); @@ -743,7 +744,7 @@ static int usb_serial_probe(struct usb_interface *interface, serial = create_serial(dev, interface, type); if (!serial) { module_put(type->driver.owner); - dev_err(&interface->dev, "%s - out of memory\n", __func__); + dev_err(ddev, "%s - out of memory\n", __func__); return -ENOMEM; } @@ -755,7 +756,7 @@ static int usb_serial_probe(struct usb_interface *interface, retval = type->probe(serial, id); if (retval) { - dbg("sub driver rejected device"); + dev_dbg(ddev, "sub driver rejected device\n"); usb_serial_put(serial); module_put(type->driver.owner); return retval; @@ -770,28 +771,28 @@ static int usb_serial_probe(struct usb_interface *interface, if (usb_endpoint_is_bulk_in(endpoint)) { /* we found a bulk in endpoint */ - dbg("found bulk in on endpoint %d", i); + dev_dbg(ddev, "found bulk in on endpoint %d\n", i); bulk_in_endpoint[num_bulk_in] = endpoint; ++num_bulk_in; } if (usb_endpoint_is_bulk_out(endpoint)) { /* we found a bulk out endpoint */ - dbg("found bulk out on endpoint %d", i); + dev_dbg(ddev, "found bulk out on endpoint %d\n", i); bulk_out_endpoint[num_bulk_out] = endpoint; ++num_bulk_out; } if (usb_endpoint_is_int_in(endpoint)) { /* we found a interrupt in endpoint */ - dbg("found interrupt in on endpoint %d", i); + dev_dbg(ddev, "found interrupt in on endpoint %d\n", i); interrupt_in_endpoint[num_interrupt_in] = endpoint; ++num_interrupt_in; } if (usb_endpoint_is_int_out(endpoint)) { /* we found an interrupt out endpoint */ - dbg("found interrupt out on endpoint %d", i); + dev_dbg(ddev, "found interrupt out on endpoint %d\n", i); interrupt_out_endpoint[num_interrupt_out] = endpoint; ++num_interrupt_out; } @@ -815,7 +816,7 @@ static int usb_serial_probe(struct usb_interface *interface, endpoint = &iface_desc->endpoint[i].desc; if (usb_endpoint_is_int_in(endpoint)) { /* we found a interrupt in endpoint */ - dbg("found interrupt in for Prolific device on separate interface"); + dev_dbg(ddev, "found interrupt in for Prolific device on separate interface\n"); interrupt_in_endpoint[num_interrupt_in] = endpoint; ++num_interrupt_in; } @@ -827,7 +828,7 @@ static int usb_serial_probe(struct usb_interface *interface, * properly during a later invocation of usb_serial_probe */ if (num_bulk_in == 0 || num_bulk_out == 0) { - dev_info(&interface->dev, "PL-2303 hack: descriptors matched but endpoints did not\n"); + dev_info(ddev, "PL-2303 hack: descriptors matched but endpoints did not\n"); usb_serial_put(serial); module_put(type->driver.owner); return -ENODEV; @@ -840,14 +841,13 @@ static int usb_serial_probe(struct usb_interface *interface, if (type == &usb_serial_generic_device) { num_ports = num_bulk_out; if (num_ports == 0) { - dev_err(&interface->dev, - "Generic device with no bulk out, not allowed.\n"); + dev_err(ddev, "Generic device with no bulk out, not allowed.\n"); usb_serial_put(serial); module_put(type->driver.owner); return -EIO; } - dev_info(&interface->dev, "The \"generic\" usb-serial driver is only for testing and one-off prototypes.\n"); - dev_info(&interface->dev, "Tell linux-usb@vger.kernel.org to add your device to a proper driver.\n"); + dev_info(ddev, "The \"generic\" usb-serial driver is only for testing and one-off prototypes.\n"); + dev_info(ddev, "Tell linux-usb@vger.kernel.org to add your device to a proper driver.\n"); } #endif if (!num_ports) { @@ -865,8 +865,7 @@ static int usb_serial_probe(struct usb_interface *interface, serial->num_interrupt_out = num_interrupt_out; /* found all that we need */ - dev_info(&interface->dev, "%s converter detected\n", - type->description); + dev_info(ddev, "%s converter detected\n", type->description); /* create our ports, we need as many as the max endpoints */ /* we don't use num_ports here because some devices have more @@ -877,8 +876,7 @@ static int usb_serial_probe(struct usb_interface *interface, max_endpoints = max(max_endpoints, (int)serial->num_ports); serial->num_port_pointers = max_endpoints; - dbg("%s - setting up %d port structures for this device", - __func__, max_endpoints); + dev_dbg(ddev, "setting up %d port structures for this device", max_endpoints); for (i = 0; i < max_endpoints; ++i) { port = kzalloc(sizeof(struct usb_serial_port), GFP_KERNEL); if (!port) @@ -911,15 +909,13 @@ static int usb_serial_probe(struct usb_interface *interface, set_bit(j, &port->read_urbs_free); port->read_urbs[j] = usb_alloc_urb(0, GFP_KERNEL); if (!port->read_urbs[j]) { - dev_err(&interface->dev, - "No free urbs available\n"); + dev_err(ddev, "No free urbs available\n"); goto probe_error; } port->bulk_in_buffers[j] = kmalloc(buffer_size, GFP_KERNEL); if (!port->bulk_in_buffers[j]) { - dev_err(&interface->dev, - "Couldn't allocate bulk_in_buffer\n"); + dev_err(ddev, "Couldn't allocate bulk_in_buffer\n"); goto probe_error; } usb_fill_bulk_urb(port->read_urbs[j], dev, @@ -949,15 +945,13 @@ static int usb_serial_probe(struct usb_interface *interface, set_bit(j, &port->write_urbs_free); port->write_urbs[j] = usb_alloc_urb(0, GFP_KERNEL); if (!port->write_urbs[j]) { - dev_err(&interface->dev, - "No free urbs available\n"); + dev_err(ddev, "No free urbs available\n"); goto probe_error; } port->bulk_out_buffers[j] = kmalloc(buffer_size, GFP_KERNEL); if (!port->bulk_out_buffers[j]) { - dev_err(&interface->dev, - "Couldn't allocate bulk_out_buffer\n"); + dev_err(ddev, "Couldn't allocate bulk_out_buffer\n"); goto probe_error; } usb_fill_bulk_urb(port->write_urbs[j], dev, @@ -978,8 +972,7 @@ static int usb_serial_probe(struct usb_interface *interface, port = serial->port[i]; port->interrupt_in_urb = usb_alloc_urb(0, GFP_KERNEL); if (!port->interrupt_in_urb) { - dev_err(&interface->dev, - "No free urbs available\n"); + dev_err(ddev, "No free urbs available\n"); goto probe_error; } buffer_size = usb_endpoint_maxp(endpoint); @@ -988,8 +981,7 @@ static int usb_serial_probe(struct usb_interface *interface, port->interrupt_in_buffer = kmalloc(buffer_size, GFP_KERNEL); if (!port->interrupt_in_buffer) { - dev_err(&interface->dev, - "Couldn't allocate interrupt_in_buffer\n"); + dev_err(ddev, "Couldn't allocate interrupt_in_buffer\n"); goto probe_error; } usb_fill_int_urb(port->interrupt_in_urb, dev, @@ -1000,7 +992,7 @@ static int usb_serial_probe(struct usb_interface *interface, endpoint->bInterval); } } else if (num_interrupt_in) { - dbg("the device claims to support interrupt in transfers, but read_int_callback is not defined"); + dev_dbg(ddev, "The device claims to support interrupt in transfers, but read_int_callback is not defined\n"); } if (serial->type->write_int_callback) { @@ -1009,8 +1001,7 @@ static int usb_serial_probe(struct usb_interface *interface, port = serial->port[i]; port->interrupt_out_urb = usb_alloc_urb(0, GFP_KERNEL); if (!port->interrupt_out_urb) { - dev_err(&interface->dev, - "No free urbs available\n"); + dev_err(ddev, "No free urbs available\n"); goto probe_error; } buffer_size = usb_endpoint_maxp(endpoint); @@ -1020,8 +1011,7 @@ static int usb_serial_probe(struct usb_interface *interface, port->interrupt_out_buffer = kmalloc(buffer_size, GFP_KERNEL); if (!port->interrupt_out_buffer) { - dev_err(&interface->dev, - "Couldn't allocate interrupt_out_buffer\n"); + dev_err(ddev, "Couldn't allocate interrupt_out_buffer\n"); goto probe_error; } usb_fill_int_urb(port->interrupt_out_urb, dev, @@ -1032,7 +1022,7 @@ static int usb_serial_probe(struct usb_interface *interface, endpoint->bInterval); } } else if (num_interrupt_out) { - dbg("the device claims to support interrupt out transfers, but write_int_callback is not defined"); + dev_dbg(ddev, "The device claims to support interrupt out transfers, but write_int_callback is not defined\n"); } usb_set_intfdata(interface, serial); @@ -1060,7 +1050,7 @@ static int usb_serial_probe(struct usb_interface *interface, serial->disconnected = 1; if (get_free_serial(serial, num_ports, &minor) == NULL) { - dev_err(&interface->dev, "No more free serial devices\n"); + dev_err(ddev, "No more free serial devices\n"); goto probe_error; } serial->minor = minor; @@ -1069,18 +1059,17 @@ static int usb_serial_probe(struct usb_interface *interface, for (i = 0; i < num_ports; ++i) { port = serial->port[i]; dev_set_name(&port->dev, "ttyUSB%d", port->number); - dbg ("%s - registering %s", __func__, dev_name(&port->dev)); + dev_dbg(ddev, "registering %s", dev_name(&port->dev)); device_enable_async_suspend(&port->dev); retval = device_add(&port->dev); if (retval) - dev_err(&port->dev, "Error registering port device, " - "continuing\n"); + dev_err(ddev, "Error registering port device, continuing\n"); } serial->disconnected = 0; - usb_serial_console_init(debug, minor); + usb_serial_console_init(minor); exit: module_put(type->driver.owner); return 0; @@ -1099,7 +1088,6 @@ static void usb_serial_disconnect(struct usb_interface *interface) struct usb_serial_port *port; usb_serial_console_disconnect(serial); - dbg("%s", __func__); mutex_lock(&serial->disc_mutex); /* must set a flag, to signal subdrivers */ @@ -1234,8 +1222,7 @@ static int __init usb_serial_init(void) result = bus_register(&usb_serial_bus_type); if (result) { - printk(KERN_ERR "usb-serial: %s - registering bus driver " - "failed\n", __func__); + pr_err("%s - registering bus driver failed\n", __func__); goto exit_bus; } @@ -1255,29 +1242,24 @@ static int __init usb_serial_init(void) tty_set_operations(usb_serial_tty_driver, &serial_ops); result = tty_register_driver(usb_serial_tty_driver); if (result) { - printk(KERN_ERR "usb-serial: %s - tty_register_driver failed\n", - __func__); + pr_err("%s - tty_register_driver failed\n", __func__); goto exit_reg_driver; } /* register the USB driver */ result = usb_register(&usb_serial_driver); if (result < 0) { - printk(KERN_ERR "usb-serial: %s - usb_register failed\n", - __func__); + pr_err("%s - usb_register failed\n", __func__); goto exit_tty; } /* register the generic driver, if we should */ - result = usb_serial_generic_register(debug); + result = usb_serial_generic_register(); if (result < 0) { - printk(KERN_ERR "usb-serial: %s - registering generic " - "driver failed\n", __func__); + pr_err("%s - registering generic driver failed\n", __func__); goto exit_generic; } - printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_DESC "\n"); - return result; exit_generic: @@ -1290,8 +1272,7 @@ exit_reg_driver: bus_unregister(&usb_serial_bus_type); exit_bus: - printk(KERN_ERR "usb-serial: %s - returning with error %d\n", - __func__, result); + pr_err("%s - returning with error %d\n", __func__, result); put_tty_driver(usb_serial_tty_driver); return result; } @@ -1317,7 +1298,7 @@ module_exit(usb_serial_exit); do { \ if (!type->function) { \ type->function = usb_serial_generic_##function; \ - dbg("Had to override the " #function \ + pr_debug("Had to override the " #function \ " usb serial operation with the generic one.");\ } \ } while (0) @@ -1360,12 +1341,10 @@ static int usb_serial_register(struct usb_serial_driver *driver) retval = usb_serial_bus_register(driver); if (retval) { - printk(KERN_ERR "usb-serial: problem %d when registering " - "driver %s\n", retval, driver->description); + pr_err("problem %d when registering driver %s\n", retval, driver->description); list_del(&driver->driver_list); } else - printk(KERN_INFO "USB Serial support registered for %s\n", - driver->description); + pr_info("USB Serial support registered for %s\n", driver->description); mutex_unlock(&table_lock); return retval; @@ -1373,8 +1352,7 @@ static int usb_serial_register(struct usb_serial_driver *driver) static void usb_serial_deregister(struct usb_serial_driver *device) { - printk(KERN_INFO "USB Serial deregistering driver %s\n", - device->description); + pr_info("USB Serial deregistering driver %s\n", device->description); mutex_lock(&table_lock); list_del(&device->driver_list); usb_serial_bus_deregister(device); @@ -1425,9 +1403,10 @@ int usb_serial_register_drivers(struct usb_serial_driver *const serial_drivers[] /* we only set the reset_resume field if the serial_driver has one */ for (sd = serial_drivers; *sd; ++sd) { - if ((*sd)->reset_resume) + if ((*sd)->reset_resume) { udriver->reset_resume = usb_serial_reset_resume; break; + } } rc = usb_register(udriver); @@ -1477,6 +1456,3 @@ EXPORT_SYMBOL_GPL(usb_serial_deregister_drivers); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c index 72b678d90831..e42aa398ed37 100644 --- a/drivers/usb/serial/usb_wwan.c +++ b/drivers/usb/serial/usb_wwan.c @@ -37,8 +37,6 @@ #include <linux/serial.h> #include "usb-wwan.h" -static bool debug; - void usb_wwan_dtr_rts(struct usb_serial_port *port, int on) { struct usb_serial *serial = port->serial; @@ -178,7 +176,7 @@ int usb_wwan_ioctl(struct tty_struct *tty, { struct usb_serial_port *port = tty->driver_data; - dbg("%s cmd 0x%04x", __func__, cmd); + dev_dbg(&port->dev, "%s cmd 0x%04x\n", __func__, cmd); switch (cmd) { case TIOCGSERIAL: @@ -191,7 +189,7 @@ int usb_wwan_ioctl(struct tty_struct *tty, break; } - dbg("%s arg not supported", __func__); + dev_dbg(&port->dev, "%s arg not supported\n", __func__); return -ENOIOCTLCMD; } @@ -212,7 +210,7 @@ int usb_wwan_write(struct tty_struct *tty, struct usb_serial_port *port, portdata = usb_get_serial_port_data(port); intfdata = port->serial->private; - dbg("%s: write (%d chars)", __func__, count); + dev_dbg(&port->dev, "%s: write (%d chars)\n", __func__, count); i = 0; left = count; @@ -229,8 +227,8 @@ int usb_wwan_write(struct tty_struct *tty, struct usb_serial_port *port, usb_unlink_urb(this_urb); continue; } - dbg("%s: endpoint %d buf %d", __func__, - usb_pipeendpoint(this_urb->pipe), i); + dev_dbg(&port->dev, "%s: endpoint %d buf %d\n", __func__, + usb_pipeendpoint(this_urb->pipe), i); err = usb_autopm_get_interface_async(port->serial->interface); if (err < 0) @@ -249,8 +247,9 @@ int usb_wwan_write(struct tty_struct *tty, struct usb_serial_port *port, spin_unlock_irqrestore(&intfdata->susp_lock, flags); err = usb_submit_urb(this_urb, GFP_ATOMIC); if (err) { - dbg("usb_submit_urb %p (write bulk) failed " - "(%d)", this_urb, err); + dev_dbg(&port->dev, + "usb_submit_urb %p (write bulk) failed (%d)\n", + this_urb, err); clear_bit(i, &portdata->out_busy); spin_lock_irqsave(&intfdata->susp_lock, flags); intfdata->in_flight--; @@ -267,7 +266,7 @@ int usb_wwan_write(struct tty_struct *tty, struct usb_serial_port *port, } count -= left; - dbg("%s: wrote (did %d)", __func__, count); + dev_dbg(&port->dev, "%s: wrote (did %d)\n", __func__, count); return count; } EXPORT_SYMBOL(usb_wwan_write); @@ -278,15 +277,17 @@ static void usb_wwan_indat_callback(struct urb *urb) int endpoint; struct usb_serial_port *port; struct tty_struct *tty; + struct device *dev; unsigned char *data = urb->transfer_buffer; int status = urb->status; endpoint = usb_pipeendpoint(urb->pipe); port = urb->context; + dev = &port->dev; if (status) { - dbg("%s: nonzero status: %d on endpoint %02x.", - __func__, status, endpoint); + dev_dbg(dev, "%s: nonzero status: %d on endpoint %02x.\n", + __func__, status, endpoint); } else { tty = tty_port_tty_get(&port->port); if (tty) { @@ -295,7 +296,7 @@ static void usb_wwan_indat_callback(struct urb *urb) urb->actual_length); tty_flip_buffer_push(tty); } else - dbg("%s: empty read urb received", __func__); + dev_dbg(dev, "%s: empty read urb received\n", __func__); tty_kref_put(tty); } @@ -303,8 +304,7 @@ static void usb_wwan_indat_callback(struct urb *urb) err = usb_submit_urb(urb, GFP_ATOMIC); if (err) { if (err != -EPERM) { - printk(KERN_ERR "%s: resubmit read urb failed. " - "(%d)", __func__, err); + dev_err(dev, "%s: resubmit read urb failed. (%d)\n", __func__, err); /* busy also in error unless we are killed */ usb_mark_last_busy(port->serial->dev); } @@ -356,7 +356,7 @@ int usb_wwan_write_room(struct tty_struct *tty) data_len += OUT_BUFLEN; } - dbg("%s: %d", __func__, data_len); + dev_dbg(&port->dev, "%s: %d\n", __func__, data_len); return data_len; } EXPORT_SYMBOL(usb_wwan_write_room); @@ -378,7 +378,7 @@ int usb_wwan_chars_in_buffer(struct tty_struct *tty) if (this_urb && test_bit(i, &portdata->out_busy)) data_len += this_urb->transfer_buffer_length; } - dbg("%s: %d", __func__, data_len); + dev_dbg(&port->dev, "%s: %d\n", __func__, data_len); return data_len; } EXPORT_SYMBOL(usb_wwan_chars_in_buffer); @@ -401,8 +401,8 @@ int usb_wwan_open(struct tty_struct *tty, struct usb_serial_port *port) continue; err = usb_submit_urb(urb, GFP_KERNEL); if (err) { - dbg("%s: submit urb %d failed (%d) %d", - __func__, i, err, urb->transfer_buffer_length); + dev_dbg(&port->dev, "%s: submit urb %d failed (%d) %d\n", + __func__, i, err, urb->transfer_buffer_length); } } @@ -458,7 +458,9 @@ static struct urb *usb_wwan_setup_urb(struct usb_serial *serial, int endpoint, urb = usb_alloc_urb(0, GFP_KERNEL); /* No ISO */ if (urb == NULL) { - dbg("%s: alloc for endpoint %d failed.", __func__, endpoint); + dev_dbg(&serial->interface->dev, + "%s: alloc for endpoint %d failed.\n", __func__, + endpoint); return NULL; } @@ -522,8 +524,8 @@ int usb_wwan_startup(struct usb_serial *serial) port = serial->port[i]; portdata = kzalloc(sizeof(*portdata), GFP_KERNEL); if (!portdata) { - dbg("%s: kmalloc for usb_wwan_port_private (%d) failed!.", - __func__, i); + dev_dbg(&port->dev, "%s: kmalloc for usb_wwan_port_private (%d) failed!.\n", + __func__, i); return 1; } init_usb_anchor(&portdata->delayed); @@ -548,7 +550,8 @@ int usb_wwan_startup(struct usb_serial *serial) continue; err = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); if (err) - dbg("%s: submit irq_in urb failed %d", __func__, err); + dev_dbg(&port->dev, "%s: submit irq_in urb failed %d\n", + __func__, err); } usb_wwan_setup_urbs(serial); return 0; @@ -683,11 +686,11 @@ int usb_wwan_resume(struct usb_serial *serial) for (i = 0; i < serial->num_ports; i++) { port = serial->port[i]; if (!port->interrupt_in_urb) { - dbg("%s: No interrupt URB for port %d", __func__, i); + dev_dbg(&port->dev, "%s: No interrupt URB for port\n", __func__); continue; } err = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO); - dbg("Submitted interrupt URB for port %d (result %d)", i, err); + dev_dbg(&port->dev, "Submitted interrupt URB for port (result %d)\n", err); if (err < 0) { dev_err(&port->dev, "%s: Error %d for interrupt URB\n", __func__, err); @@ -733,6 +736,3 @@ MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_VERSION(DRIVER_VERSION); MODULE_LICENSE("GPL"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug messages"); diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index f253c91383da..1129aa73c23e 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -51,9 +51,6 @@ static int palm_os_3_probe(struct usb_serial *serial, static int palm_os_4_probe(struct usb_serial *serial, const struct usb_device_id *id); -/* Parameters that may be passed into the module. */ -static bool debug; - static struct usb_device_id id_table [] = { { USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_VISOR_ID), .driver_info = (kernel_ulong_t)&palm_os_3_probe }, @@ -310,8 +307,8 @@ static void visor_read_int_callback(struct urb *urb) * Rumor has it this endpoint is used to notify when data * is ready to be read from the bulk ones. */ - usb_serial_debug_data(debug, &port->dev, __func__, - urb->actual_length, urb->transfer_buffer); + usb_serial_debug_data(&port->dev, __func__, urb->actual_length, + urb->transfer_buffer); exit: result = usb_submit_urb(urb, GFP_ATOMIC); @@ -443,8 +440,7 @@ static int palm_os_4_probe(struct usb_serial *serial, dev_err(dev, "%s - error %d getting connection info\n", __func__, retval); else - usb_serial_debug_data(debug, &serial->dev->dev, __func__, - retval, transfer_buffer); + usb_serial_debug_data(dev, __func__, retval, transfer_buffer); kfree(transfer_buffer); return 0; @@ -625,6 +621,3 @@ module_usb_serial_driver(serial_drivers, id_table_combined); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index b36077de72b9..346c7efc20b0 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -32,12 +32,9 @@ #include <linux/serial_reg.h> #include <linux/serial.h> #include <linux/usb/serial.h> -#include <linux/firmware.h> -#include <linux/ihex.h> +#include <linux/usb/ezusb.h> #include "whiteheat.h" /* WhiteHEAT specific commands */ -static bool debug; - #ifndef CMSPAR #define CMSPAR 0 #endif @@ -195,84 +192,15 @@ static int firm_report_tx_done(struct usb_serial_port *port); static int whiteheat_firmware_download(struct usb_serial *serial, const struct usb_device_id *id) { - int response, ret = -ENOENT; - const struct firmware *loader_fw = NULL, *firmware_fw = NULL; - const struct ihex_binrec *record; + int response; - if (request_ihex_firmware(&firmware_fw, "whiteheat.fw", - &serial->dev->dev)) { - dev_err(&serial->dev->dev, - "%s - request \"whiteheat.fw\" failed\n", __func__); - goto out; - } - if (request_ihex_firmware(&loader_fw, "whiteheat_loader.fw", - &serial->dev->dev)) { - dev_err(&serial->dev->dev, - "%s - request \"whiteheat_loader.fw\" failed\n", - __func__); - goto out; + response = ezusb_fx1_ihex_firmware_download(serial->dev, "whiteheat_loader.fw"); + if (response >= 0) { + response = ezusb_fx1_ihex_firmware_download(serial->dev, "whiteheat.fw"); + if (response >= 0) + return 0; } - ret = 0; - response = ezusb_set_reset (serial, 1); - - record = (const struct ihex_binrec *)loader_fw->data; - while (record) { - response = ezusb_writememory (serial, be32_to_cpu(record->addr), - (unsigned char *)record->data, - be16_to_cpu(record->len), 0xa0); - if (response < 0) { - dev_err(&serial->dev->dev, "%s - ezusb_writememory " - "failed for loader (%d %04X %p %d)\n", - __func__, response, be32_to_cpu(record->addr), - record->data, be16_to_cpu(record->len)); - break; - } - record = ihex_next_binrec(record); - } - - response = ezusb_set_reset(serial, 0); - - record = (const struct ihex_binrec *)firmware_fw->data; - while (record && be32_to_cpu(record->addr) < 0x1b40) - record = ihex_next_binrec(record); - while (record) { - response = ezusb_writememory (serial, be32_to_cpu(record->addr), - (unsigned char *)record->data, - be16_to_cpu(record->len), 0xa3); - if (response < 0) { - dev_err(&serial->dev->dev, "%s - ezusb_writememory " - "failed for first firmware step " - "(%d %04X %p %d)\n", __func__, response, - be32_to_cpu(record->addr), record->data, - be16_to_cpu(record->len)); - break; - } - ++record; - } - - response = ezusb_set_reset(serial, 1); - - record = (const struct ihex_binrec *)firmware_fw->data; - while (record && be32_to_cpu(record->addr) < 0x1b40) { - response = ezusb_writememory (serial, be32_to_cpu(record->addr), - (unsigned char *)record->data, - be16_to_cpu(record->len), 0xa0); - if (response < 0) { - dev_err(&serial->dev->dev, "%s - ezusb_writememory " - "failed for second firmware step " - "(%d %04X %p %d)\n", __func__, response, - be32_to_cpu(record->addr), record->data, - be16_to_cpu(record->len)); - break; - } - ++record; - } - ret = 0; - response = ezusb_set_reset (serial, 0); - out: - release_firmware(loader_fw); - release_firmware(firmware_fw); - return ret; + return -ENOENT; } @@ -533,7 +461,7 @@ static int whiteheat_ioctl(struct tty_struct *tty, struct serial_struct serstruct; void __user *user_arg = (void __user *)arg; - dbg("%s - port %d, cmd 0x%.4x", __func__, port->number, cmd); + dev_dbg(&port->dev, "%s - cmd 0x%.4x\n", __func__, cmd); switch (cmd) { case TIOCGSERIAL: @@ -580,7 +508,7 @@ static void command_port_write_callback(struct urb *urb) int status = urb->status; if (status) { - dbg("nonzero urb status: %d", status); + dev_dbg(&urb->dev->dev, "nonzero urb status: %d\n", status); return; } } @@ -596,19 +524,18 @@ static void command_port_read_callback(struct urb *urb) command_info = usb_get_serial_port_data(command_port); if (!command_info) { - dbg("%s - command_info is NULL, exiting.", __func__); + dev_dbg(&urb->dev->dev, "%s - command_info is NULL, exiting.\n", __func__); return; } if (status) { - dbg("%s - nonzero urb status: %d", __func__, status); + dev_dbg(&urb->dev->dev, "%s - nonzero urb status: %d\n", __func__, status); if (status != -ENOENT) command_info->command_finished = WHITEHEAT_CMD_FAILURE; wake_up(&command_info->wait_command); return; } - usb_serial_debug_data(debug, &command_port->dev, - __func__, urb->actual_length, data); + usb_serial_debug_data(&command_port->dev, __func__, urb->actual_length, data); if (data[0] == WHITEHEAT_CMD_COMPLETE) { command_info->command_finished = WHITEHEAT_CMD_COMPLETE; @@ -619,19 +546,19 @@ static void command_port_read_callback(struct urb *urb) } else if (data[0] == WHITEHEAT_EVENT) { /* These are unsolicited reports from the firmware, hence no waiting command to wakeup */ - dbg("%s - event received", __func__); + dev_dbg(&urb->dev->dev, "%s - event received\n", __func__); } else if (data[0] == WHITEHEAT_GET_DTR_RTS) { memcpy(command_info->result_buffer, &data[1], urb->actual_length - 1); command_info->command_finished = WHITEHEAT_CMD_COMPLETE; wake_up(&command_info->wait_command); } else - dbg("%s - bad reply from firmware", __func__); + dev_dbg(&urb->dev->dev, "%s - bad reply from firmware\n", __func__); /* Continue trying to always read */ result = usb_submit_urb(command_port->read_urb, GFP_ATOMIC); if (result) - dbg("%s - failed resubmitting read urb, error %d", + dev_dbg(&urb->dev->dev, "%s - failed resubmitting read urb, error %d\n", __func__, result); } @@ -645,11 +572,12 @@ static int firm_send_command(struct usb_serial_port *port, __u8 command, struct usb_serial_port *command_port; struct whiteheat_command_private *command_info; struct whiteheat_private *info; + struct device *dev = &port->dev; __u8 *transfer_buffer; int retval = 0; int t; - dbg("%s - command %d", __func__, command); + dev_dbg(dev, "%s - command %d\n", __func__, command); command_port = port->serial->port[COMMAND_PORT]; command_info = usb_get_serial_port_data(command_port); @@ -662,7 +590,7 @@ static int firm_send_command(struct usb_serial_port *port, __u8 command, command_port->write_urb->transfer_buffer_length = datasize + 1; retval = usb_submit_urb(command_port->write_urb, GFP_NOIO); if (retval) { - dbg("%s - submit urb failed", __func__); + dev_dbg(dev, "%s - submit urb failed\n", __func__); goto exit; } @@ -673,19 +601,19 @@ static int firm_send_command(struct usb_serial_port *port, __u8 command, usb_kill_urb(command_port->write_urb); if (command_info->command_finished == false) { - dbg("%s - command timed out.", __func__); + dev_dbg(dev, "%s - command timed out.\n", __func__); retval = -ETIMEDOUT; goto exit; } if (command_info->command_finished == WHITEHEAT_CMD_FAILURE) { - dbg("%s - command failed.", __func__); + dev_dbg(dev, "%s - command failed.\n", __func__); retval = -EIO; goto exit; } if (command_info->command_finished == WHITEHEAT_CMD_COMPLETE) { - dbg("%s - command completed.", __func__); + dev_dbg(dev, "%s - command completed.\n", __func__); switch (command) { case WHITEHEAT_GET_DTR_RTS: info = usb_get_serial_port_data(port); @@ -723,6 +651,7 @@ static int firm_close(struct usb_serial_port *port) static void firm_setup_port(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; + struct device *dev = &port->dev; struct whiteheat_port_settings port_settings; unsigned int cflag = tty->termios.c_cflag; @@ -736,7 +665,7 @@ static void firm_setup_port(struct tty_struct *tty) default: case CS8: port_settings.bits = 8; break; } - dbg("%s - data bits = %d", __func__, port_settings.bits); + dev_dbg(dev, "%s - data bits = %d\n", __func__, port_settings.bits); /* determine the parity */ if (cflag & PARENB) @@ -752,14 +681,14 @@ static void firm_setup_port(struct tty_struct *tty) port_settings.parity = WHITEHEAT_PAR_EVEN; else port_settings.parity = WHITEHEAT_PAR_NONE; - dbg("%s - parity = %c", __func__, port_settings.parity); + dev_dbg(dev, "%s - parity = %c\n", __func__, port_settings.parity); /* figure out the stop bits requested */ if (cflag & CSTOPB) port_settings.stop = 2; else port_settings.stop = 1; - dbg("%s - stop bits = %d", __func__, port_settings.stop); + dev_dbg(dev, "%s - stop bits = %d\n", __func__, port_settings.stop); /* figure out the flow control settings */ if (cflag & CRTSCTS) @@ -767,7 +696,7 @@ static void firm_setup_port(struct tty_struct *tty) WHITEHEAT_HFLOW_RTS); else port_settings.hflow = WHITEHEAT_HFLOW_NONE; - dbg("%s - hardware flow control = %s %s %s %s", __func__, + dev_dbg(dev, "%s - hardware flow control = %s %s %s %s\n", __func__, (port_settings.hflow & WHITEHEAT_HFLOW_CTS) ? "CTS" : "", (port_settings.hflow & WHITEHEAT_HFLOW_RTS) ? "RTS" : "", (port_settings.hflow & WHITEHEAT_HFLOW_DSR) ? "DSR" : "", @@ -778,16 +707,15 @@ static void firm_setup_port(struct tty_struct *tty) port_settings.sflow = WHITEHEAT_SFLOW_RXTX; else port_settings.sflow = WHITEHEAT_SFLOW_NONE; - dbg("%s - software flow control = %c", __func__, port_settings.sflow); + dev_dbg(dev, "%s - software flow control = %c\n", __func__, port_settings.sflow); port_settings.xon = START_CHAR(tty); port_settings.xoff = STOP_CHAR(tty); - dbg("%s - XON = %2x, XOFF = %2x", - __func__, port_settings.xon, port_settings.xoff); + dev_dbg(dev, "%s - XON = %2x, XOFF = %2x\n", __func__, port_settings.xon, port_settings.xoff); /* get the baud rate wanted */ port_settings.baud = tty_get_baud_rate(tty); - dbg("%s - baud rate = %d", __func__, port_settings.baud); + dev_dbg(dev, "%s - baud rate = %d\n", __func__, port_settings.baud); /* fixme: should set validated settings */ tty_encode_baud_rate(tty, port_settings.baud, port_settings.baud); @@ -918,6 +846,3 @@ MODULE_LICENSE("GPL"); MODULE_FIRMWARE("whiteheat.fw"); MODULE_FIRMWARE("whiteheat_loader.fw"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); diff --git a/drivers/usb/serial/zte_ev.c b/drivers/usb/serial/zte_ev.c new file mode 100644 index 000000000000..39ee7373b4ee --- /dev/null +++ b/drivers/usb/serial/zte_ev.c @@ -0,0 +1,307 @@ +/* + * ZTE_EV USB serial driver + * + * Copyright (C) 2012 Greg Kroah-Hartman <gregkh@linuxfoundation.org> + * Copyright (C) 2012 Linux Foundation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This driver is based on code found in a ZTE_ENV patch that modified + * the usb-serial generic driver. Comments were left in that I think + * show the commands used to talk to the device, but I am not sure. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/tty.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> +#include <linux/uaccess.h> + +#define MAX_SETUP_DATA_SIZE 32 + +static void debug_data(struct device *dev, const char *function, int len, + const unsigned char *data, int result) +{ + dev_dbg(dev, "result = %d\n", result); + if (result == len) + dev_dbg(dev, "%s - length = %d, data = %*ph\n", function, + len, len, data); +} + +static int zte_ev_usb_serial_open(struct tty_struct *tty, + struct usb_serial_port *port) +{ + struct usb_device *udev = port->serial->dev; + struct device *dev = &port->dev; + int result = 0; + int len; + unsigned char *buf; + + if (port->number != 0) + return -ENODEV; + + buf = kmalloc(MAX_SETUP_DATA_SIZE, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + /* send 1st ctl cmd(CTL 21 22 01 00 00 00 00 00) */ + len = 0; + result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + 0x22, 0x21, + 0x0001, 0x0000, NULL, len, + HZ * USB_CTRL_GET_TIMEOUT); + dev_dbg(dev, "result = %d\n", result); + + /* send 2st cmd and recieve data */ + /* + * 16.0 CTL a1 21 00 00 00 00 07 00 CLASS 25.1.0(5) + * 16.0 DI 00 96 00 00 00 00 08 + */ + len = 0x0007; + result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), + 0x21, 0xa1, + 0x0000, 0x0000, buf, len, + HZ * USB_CTRL_GET_TIMEOUT); + debug_data(dev, __func__, len, buf, result); + + /* send 3 cmd */ + /* + * 16.0 CTL 21 20 00 00 00 00 07 00 CLASS 30.1.0 + * 16.0 DO 80 25 00 00 00 00 08 .%..... 30.2.0 + */ + len = 0x0007; + buf[0] = 0x80; + buf[1] = 0x25; + buf[2] = 0x00; + buf[3] = 0x00; + buf[4] = 0x00; + buf[5] = 0x00; + buf[6] = 0x08; + result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + 0x20, 0x21, + 0x0000, 0x0000, buf, len, + HZ * USB_CTRL_GET_TIMEOUT); + debug_data(dev, __func__, len, buf, result); + + /* send 4 cmd */ + /* + * 16.0 CTL 21 22 03 00 00 00 00 00 + */ + len = 0; + result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + 0x22, 0x21, + 0x0003, 0x0000, NULL, len, + HZ * USB_CTRL_GET_TIMEOUT); + dev_dbg(dev, "result = %d\n", result); + + /* send 5 cmd */ + /* + * 16.0 CTL a1 21 00 00 00 00 07 00 CLASS 33.1.0 + * 16.0 DI 80 25 00 00 00 00 08 + */ + len = 0x0007; + result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), + 0x21, 0xa1, + 0x0000, 0x0000, buf, len, + HZ * USB_CTRL_GET_TIMEOUT); + debug_data(dev, __func__, len, buf, result); + + /* send 6 cmd */ + /* + * 16.0 CTL 21 20 00 00 00 00 07 00 CLASS 34.1.0 + * 16.0 DO 80 25 00 00 00 00 08 + */ + len = 0x0007; + buf[0] = 0x80; + buf[1] = 0x25; + buf[2] = 0x00; + buf[3] = 0x00; + buf[4] = 0x00; + buf[5] = 0x00; + buf[6] = 0x08; + result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + 0x20, 0x21, + 0x0000, 0x0000, buf, len, + HZ * USB_CTRL_GET_TIMEOUT); + debug_data(dev, __func__, len, buf, result); + kfree(buf); + + return usb_serial_generic_open(tty, port); +} + +/* + * CTL 21 22 02 00 00 00 00 00 CLASS 338.1.0 + * + * 16.1 DI a1 20 00 00 00 00 02 00 02 00 . ........ 340.1.0 + * 16.0 CTL 21 22 03 00 00 00 00 00 CLASS 341.1.0 + * + * 16.0 CTL a1 21 00 00 00 00 07 00 CLASS 346.1.0(3) + * 16.0 DI 00 08 07 00 00 00 08 ....... 346.2.0 + * + * 16.0 CTL 21 20 00 00 00 00 07 00 CLASS 349.1.0 + * 16.0 DO 00 c2 01 00 00 00 08 ....... 349.2.0 + * + * 16.0 CTL 21 22 03 00 00 00 00 00 CLASS 350.1.0(2) + * + * 16.0 CTL a1 21 00 00 00 00 07 00 CLASS 352.1.0 + * 16.0 DI 00 c2 01 00 00 00 08 ....... 352.2.0 + * + * 16.1 DI a1 20 00 00 00 00 02 00 02 00 . ........ 353.1.0 + * + * 16.0 CTL 21 20 00 00 00 00 07 00 CLASS 354.1.0 + * 16.0 DO 00 c2 01 00 00 00 08 ....... 354.2.0 + * + * 16.0 CTL 21 22 03 00 00 00 00 00 +*/ + +static void zte_ev_usb_serial_close(struct usb_serial_port *port) +{ + struct usb_device *udev = port->serial->dev; + struct device *dev = &port->dev; + int result = 0; + int len; + unsigned char *buf; + + if (port->number != 0) + return; + + buf = kmalloc(MAX_SETUP_DATA_SIZE, GFP_KERNEL); + if (!buf) + return; + + /* send 1st ctl cmd(CTL 21 22 02 00 00 00 00 00) */ + len = 0; + result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + 0x22, 0x21, + 0x0002, 0x0000, NULL, len, + HZ * USB_CTRL_GET_TIMEOUT); + dev_dbg(dev, "result = %d\n", result); + + /* send 2st ctl cmd(CTL 21 22 03 00 00 00 00 00 ) */ + len = 0; + result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + 0x22, 0x21, + 0x0003, 0x0000, NULL, len, + HZ * USB_CTRL_GET_TIMEOUT); + dev_dbg(dev, "result = %d\n", result); + + /* send 3st cmd and recieve data */ + /* + * 16.0 CTL a1 21 00 00 00 00 07 00 CLASS 25.1.0(5) + * 16.0 DI 00 08 07 00 00 00 08 + */ + len = 0x0007; + result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), + 0x21, 0xa1, + 0x0000, 0x0000, buf, len, + HZ * USB_CTRL_GET_TIMEOUT); + debug_data(dev, __func__, len, buf, result); + + /* send 4 cmd */ + /* + * 16.0 CTL 21 20 00 00 00 00 07 00 CLASS 30.1.0 + * 16.0 DO 00 c2 01 00 00 00 08 .%..... 30.2.0 + */ + len = 0x0007; + buf[0] = 0x00; + buf[1] = 0xc2; + buf[2] = 0x01; + buf[3] = 0x00; + buf[4] = 0x00; + buf[5] = 0x00; + buf[6] = 0x08; + result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + 0x20, 0x21, + 0x0000, 0x0000, buf, len, + HZ * USB_CTRL_GET_TIMEOUT); + debug_data(dev, __func__, len, buf, result); + + /* send 5 cmd */ + /* + * 16.0 CTL 21 22 03 00 00 00 00 00 + */ + len = 0; + result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + 0x22, 0x21, + 0x0003, 0x0000, NULL, len, + HZ * USB_CTRL_GET_TIMEOUT); + dev_dbg(dev, "result = %d\n", result); + + /* send 6 cmd */ + /* + * 16.0 CTL a1 21 00 00 00 00 07 00 CLASS 33.1.0 + * 16.0 DI 00 c2 01 00 00 00 08 + */ + len = 0x0007; + result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), + 0x21, 0xa1, + 0x0000, 0x0000, buf, len, + HZ * USB_CTRL_GET_TIMEOUT); + debug_data(dev, __func__, len, buf, result); + + /* send 7 cmd */ + /* + * 16.0 CTL 21 20 00 00 00 00 07 00 CLASS 354.1.0 + * 16.0 DO 00 c2 01 00 00 00 08 ....... 354.2.0 + */ + len = 0x0007; + buf[0] = 0x00; + buf[1] = 0xc2; + buf[2] = 0x01; + buf[3] = 0x00; + buf[4] = 0x00; + buf[5] = 0x00; + buf[6] = 0x08; + result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + 0x20, 0x21, + 0x0000, 0x0000, buf, len, + HZ * USB_CTRL_GET_TIMEOUT); + debug_data(dev, __func__, len, buf, result); + + /* send 8 cmd */ + /* + * 16.0 CTL 21 22 03 00 00 00 00 00 + */ + len = 0; + result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + 0x22, 0x21, + 0x0003, 0x0000, NULL, len, + HZ * USB_CTRL_GET_TIMEOUT); + dev_dbg(dev, "result = %d\n", result); + + kfree(buf); + + usb_serial_generic_close(port); +} + +static const struct usb_device_id id_table[] = { + { USB_DEVICE(0x19d2, 0xffff) }, /* AC8700 */ + { USB_DEVICE(0x19d2, 0xfffe) }, + { USB_DEVICE(0x19d2, 0xfffd) }, /* MG880 */ + { USB_DEVICE(0x05C6, 0x3197) }, + { USB_DEVICE(0x05C6, 0x6000) }, + { }, +}; +MODULE_DEVICE_TABLE(usb, id_table); + +static struct usb_serial_driver zio_device = { + .driver = { + .owner = THIS_MODULE, + .name = "zte_ev", + }, + .id_table = id_table, + .num_ports = 1, + .open = zte_ev_usb_serial_open, + .close = zte_ev_usb_serial_close, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &zio_device, NULL +}; + +module_usb_serial_driver(serial_drivers, id_table); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig index 7691c866637b..0ae7bb64b5ea 100644 --- a/drivers/usb/storage/Kconfig +++ b/drivers/usb/storage/Kconfig @@ -213,17 +213,3 @@ config USB_UAS say 'Y' or 'M' here and the kernel will use the right driver. If you compile this driver as a module, it will be named uas. - -config USB_LIBUSUAL - bool "The shared table of common (or usual) storage devices" - depends on USB - help - This module contains a table of common (or usual) devices - for usb-storage and ub drivers, and allows to switch binding - of these devices without rebuilding modules. - - Typical syntax of /etc/modprobe.d/*conf is: - - options libusual bias="ub" - - If unsure, say N. diff --git a/drivers/usb/storage/Makefile b/drivers/usb/storage/Makefile index 82e6416a2d47..4cd55481b309 100644 --- a/drivers/usb/storage/Makefile +++ b/drivers/usb/storage/Makefile @@ -12,16 +12,9 @@ obj-$(CONFIG_USB_STORAGE) += usb-storage.o usb-storage-y := scsiglue.o protocol.o transport.o usb.o usb-storage-y += initializers.o sierra_ms.o option_ms.o - +usb-storage-y += usual-tables.o usb-storage-$(CONFIG_USB_STORAGE_DEBUG) += debug.o -ifeq ($(CONFIG_USB_LIBUSUAL),) - usb-storage-y += usual-tables.o -else - obj-$(CONFIG_USB) += usb-libusual.o - usb-libusual-y := libusual.o usual-tables.o -endif - obj-$(CONFIG_USB_STORAGE_ALAUDA) += ums-alauda.o obj-$(CONFIG_USB_STORAGE_CYPRESS_ATACB) += ums-cypress.o obj-$(CONFIG_USB_STORAGE_DATAFAB) += ums-datafab.o diff --git a/drivers/usb/storage/alauda.c b/drivers/usb/storage/alauda.c index bab8c8fe8290..be5564cc8e01 100644 --- a/drivers/usb/storage/alauda.c +++ b/drivers/usb/storage/alauda.c @@ -137,7 +137,7 @@ static int init_alauda(struct us_data *us); vendorName, productName, useProtocol, useTransport, \ initFunction, flags) \ { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ - .driver_info = (flags)|(USB_US_TYPE_STOR<<24) } + .driver_info = (flags) } static struct usb_device_id alauda_usb_ids[] = { # include "unusual_alauda.h" diff --git a/drivers/usb/storage/cypress_atacb.c b/drivers/usb/storage/cypress_atacb.c index 5fe451d16e68..070b5c0ebbf9 100644 --- a/drivers/usb/storage/cypress_atacb.c +++ b/drivers/usb/storage/cypress_atacb.c @@ -41,7 +41,7 @@ MODULE_LICENSE("GPL"); vendorName, productName, useProtocol, useTransport, \ initFunction, flags) \ { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ - .driver_info = (flags)|(USB_US_TYPE_STOR<<24) } + .driver_info = (flags) } static struct usb_device_id cypress_usb_ids[] = { # include "unusual_cypress.h" diff --git a/drivers/usb/storage/datafab.c b/drivers/usb/storage/datafab.c index 35e9c51e6696..494fee5af41d 100644 --- a/drivers/usb/storage/datafab.c +++ b/drivers/usb/storage/datafab.c @@ -86,7 +86,7 @@ static int datafab_determine_lun(struct us_data *us, vendorName, productName, useProtocol, useTransport, \ initFunction, flags) \ { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ - .driver_info = (flags)|(USB_US_TYPE_STOR<<24) } + .driver_info = (flags) } static struct usb_device_id datafab_usb_ids[] = { # include "unusual_datafab.h" diff --git a/drivers/usb/storage/ene_ub6250.c b/drivers/usb/storage/ene_ub6250.c index b28f2ad127d4..118b134a1dad 100644 --- a/drivers/usb/storage/ene_ub6250.c +++ b/drivers/usb/storage/ene_ub6250.c @@ -29,9 +29,21 @@ #include "protocol.h" #include "debug.h" +#define SD_INIT1_FIRMWARE "ene-ub6250/sd_init1.bin" +#define SD_INIT2_FIRMWARE "ene-ub6250/sd_init2.bin" +#define SD_RW_FIRMWARE "ene-ub6250/sd_rdwr.bin" +#define MS_INIT_FIRMWARE "ene-ub6250/ms_init.bin" +#define MSP_RW_FIRMWARE "ene-ub6250/msp_rdwr.bin" +#define MS_RW_FIRMWARE "ene-ub6250/ms_rdwr.bin" + MODULE_DESCRIPTION("Driver for ENE UB6250 reader"); MODULE_LICENSE("GPL"); - +MODULE_FIRMWARE(SD_INIT1_FIRMWARE); +MODULE_FIRMWARE(SD_INIT2_FIRMWARE); +MODULE_FIRMWARE(SD_RW_FIRMWARE); +MODULE_FIRMWARE(MS_INIT_FIRMWARE); +MODULE_FIRMWARE(MSP_RW_FIRMWARE); +MODULE_FIRMWARE(MS_RW_FIRMWARE); /* * The table of devices @@ -40,7 +52,7 @@ MODULE_LICENSE("GPL"); vendorName, productName, useProtocol, useTransport, \ initFunction, flags) \ { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ - .driver_info = (flags)|(USB_US_TYPE_STOR<<24) } + .driver_info = (flags)} static struct usb_device_id ene_ub6250_usb_ids[] = { # include "unusual_ene_ub6250.h" @@ -1883,28 +1895,28 @@ static int ene_load_bincode(struct us_data *us, unsigned char flag) /* For SD */ case SD_INIT1_PATTERN: US_DEBUGP("SD_INIT1_PATTERN\n"); - fw_name = "ene-ub6250/sd_init1.bin"; + fw_name = SD_INIT1_FIRMWARE; break; case SD_INIT2_PATTERN: US_DEBUGP("SD_INIT2_PATTERN\n"); - fw_name = "ene-ub6250/sd_init2.bin"; + fw_name = SD_INIT2_FIRMWARE; break; case SD_RW_PATTERN: - US_DEBUGP("SD_RDWR_PATTERN\n"); - fw_name = "ene-ub6250/sd_rdwr.bin"; + US_DEBUGP("SD_RW_PATTERN\n"); + fw_name = SD_RW_FIRMWARE; break; /* For MS */ case MS_INIT_PATTERN: US_DEBUGP("MS_INIT_PATTERN\n"); - fw_name = "ene-ub6250/ms_init.bin"; + fw_name = MS_INIT_FIRMWARE; break; case MSP_RW_PATTERN: US_DEBUGP("MSP_RW_PATTERN\n"); - fw_name = "ene-ub6250/msp_rdwr.bin"; + fw_name = MSP_RW_FIRMWARE; break; case MS_RW_PATTERN: US_DEBUGP("MS_RW_PATTERN\n"); - fw_name = "ene-ub6250/ms_rdwr.bin"; + fw_name = MS_RW_FIRMWARE; break; default: US_DEBUGP("----------- Unknown PATTERN ----------\n"); diff --git a/drivers/usb/storage/freecom.c b/drivers/usb/storage/freecom.c index 042cf9ef3153..e6df087dca9d 100644 --- a/drivers/usb/storage/freecom.c +++ b/drivers/usb/storage/freecom.c @@ -117,7 +117,7 @@ static int init_freecom(struct us_data *us); vendorName, productName, useProtocol, useTransport, \ initFunction, flags) \ { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ - .driver_info = (flags)|(USB_US_TYPE_STOR<<24) } + .driver_info = (flags) } static struct usb_device_id freecom_usb_ids[] = { # include "unusual_freecom.h" diff --git a/drivers/usb/storage/isd200.c b/drivers/usb/storage/isd200.c index 31fa24e7e68a..ecea47877364 100644 --- a/drivers/usb/storage/isd200.c +++ b/drivers/usb/storage/isd200.c @@ -74,7 +74,7 @@ static int isd200_Initialization(struct us_data *us); vendorName, productName, useProtocol, useTransport, \ initFunction, flags) \ { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ - .driver_info = (flags)|(USB_US_TYPE_STOR<<24) } + .driver_info = (flags) } static struct usb_device_id isd200_usb_ids[] = { # include "unusual_isd200.h" @@ -83,7 +83,6 @@ static struct usb_device_id isd200_usb_ids[] = { MODULE_DEVICE_TABLE(usb, isd200_usb_ids); #undef UNUSUAL_DEV -#undef USUAL_DEV /* * The flags table @@ -105,8 +104,6 @@ static struct us_unusual_dev isd200_unusual_dev_list[] = { }; #undef UNUSUAL_DEV -#undef USUAL_DEV - /* Timeout defines (in Seconds) */ diff --git a/drivers/usb/storage/jumpshot.c b/drivers/usb/storage/jumpshot.c index e3b97383186a..ddc78780b1ad 100644 --- a/drivers/usb/storage/jumpshot.c +++ b/drivers/usb/storage/jumpshot.c @@ -69,7 +69,7 @@ MODULE_LICENSE("GPL"); vendorName, productName, useProtocol, useTransport, \ initFunction, flags) \ { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ - .driver_info = (flags)|(USB_US_TYPE_STOR<<24) } + .driver_info = (flags) } static struct usb_device_id jumpshot_usb_ids[] = { # include "unusual_jumpshot.h" diff --git a/drivers/usb/storage/karma.c b/drivers/usb/storage/karma.c index a8708eae9788..f085ffb606c8 100644 --- a/drivers/usb/storage/karma.c +++ b/drivers/usb/storage/karma.c @@ -57,7 +57,7 @@ static int rio_karma_init(struct us_data *us); vendorName, productName, useProtocol, useTransport, \ initFunction, flags) \ { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ - .driver_info = (flags)|(USB_US_TYPE_STOR<<24) } + .driver_info = (flags) } static struct usb_device_id karma_usb_ids[] = { # include "unusual_karma.h" diff --git a/drivers/usb/storage/libusual.c b/drivers/usb/storage/libusual.c deleted file mode 100644 index fe3ffe1459b2..000000000000 --- a/drivers/usb/storage/libusual.c +++ /dev/null @@ -1,243 +0,0 @@ -/* - * libusual - * - * The libusual contains the table of devices common for ub and usb-storage. - */ -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/usb.h> -#include <linux/usb_usual.h> -#include <linux/vmalloc.h> -#include <linux/kthread.h> -#include <linux/mutex.h> - -/* - */ -#define USU_MOD_FL_THREAD 1 /* Thread is running */ -#define USU_MOD_FL_PRESENT 2 /* The module is loaded */ - -struct mod_status { - unsigned long fls; -}; - -static struct mod_status stat[3]; -static DEFINE_SPINLOCK(usu_lock); - -/* - */ -#define USB_US_DEFAULT_BIAS USB_US_TYPE_STOR -static atomic_t usu_bias = ATOMIC_INIT(USB_US_DEFAULT_BIAS); - -#define BIAS_NAME_SIZE (sizeof("usb-storage")) -static const char *bias_names[3] = { "none", "usb-storage", "ub" }; - -static DEFINE_MUTEX(usu_probe_mutex); -static DECLARE_COMPLETION(usu_end_notify); -static atomic_t total_threads = ATOMIC_INIT(0); - -static int usu_probe_thread(void *arg); - -/* - * @type: the module type as an integer - */ -void usb_usual_set_present(int type) -{ - struct mod_status *st; - unsigned long flags; - - if (type <= 0 || type >= 3) - return; - st = &stat[type]; - spin_lock_irqsave(&usu_lock, flags); - st->fls |= USU_MOD_FL_PRESENT; - spin_unlock_irqrestore(&usu_lock, flags); -} -EXPORT_SYMBOL_GPL(usb_usual_set_present); - -void usb_usual_clear_present(int type) -{ - struct mod_status *st; - unsigned long flags; - - if (type <= 0 || type >= 3) - return; - st = &stat[type]; - spin_lock_irqsave(&usu_lock, flags); - st->fls &= ~USU_MOD_FL_PRESENT; - spin_unlock_irqrestore(&usu_lock, flags); -} -EXPORT_SYMBOL_GPL(usb_usual_clear_present); - -/* - * Match the calling driver type against the table. - * Returns: 0 if the device matches. - */ -int usb_usual_check_type(const struct usb_device_id *id, int caller_type) -{ - int id_type = USB_US_TYPE(id->driver_info); - - if (caller_type <= 0 || caller_type >= 3) - return -EINVAL; - - /* Drivers grab fixed assignment devices */ - if (id_type == caller_type) - return 0; - /* Drivers grab devices biased to them */ - if (id_type == USB_US_TYPE_NONE && caller_type == atomic_read(&usu_bias)) - return 0; - return -ENODEV; -} -EXPORT_SYMBOL_GPL(usb_usual_check_type); - -/* - */ -static int usu_probe(struct usb_interface *intf, - const struct usb_device_id *id) -{ - int rc; - unsigned long type; - struct task_struct* task; - unsigned long flags; - - type = USB_US_TYPE(id->driver_info); - if (type == 0) - type = atomic_read(&usu_bias); - - spin_lock_irqsave(&usu_lock, flags); - if ((stat[type].fls & (USU_MOD_FL_THREAD|USU_MOD_FL_PRESENT)) != 0) { - spin_unlock_irqrestore(&usu_lock, flags); - return -ENXIO; - } - stat[type].fls |= USU_MOD_FL_THREAD; - spin_unlock_irqrestore(&usu_lock, flags); - - task = kthread_run(usu_probe_thread, (void*)type, "libusual_%ld", type); - if (IS_ERR(task)) { - rc = PTR_ERR(task); - printk(KERN_WARNING "libusual: " - "Unable to start the thread for %s: %d\n", - bias_names[type], rc); - spin_lock_irqsave(&usu_lock, flags); - stat[type].fls &= ~USU_MOD_FL_THREAD; - spin_unlock_irqrestore(&usu_lock, flags); - return rc; /* Not being -ENXIO causes a message printed */ - } - atomic_inc(&total_threads); - - return -ENXIO; -} - -static void usu_disconnect(struct usb_interface *intf) -{ - ; /* We should not be here. */ -} - -static struct usb_driver usu_driver = { - .name = "libusual", - .probe = usu_probe, - .disconnect = usu_disconnect, - .id_table = usb_storage_usb_ids, -}; - -/* - * A whole new thread for a purpose of request_module seems quite stupid. - * The request_module forks once inside again. However, if we attempt - * to load a storage module from our own modprobe thread, that module - * references our symbols, which cannot be resolved until our module is - * initialized. I wish there was a way to wait for the end of initialization. - * The module notifier reports MODULE_STATE_COMING only. - * So, we wait until module->init ends as the next best thing. - */ -static int usu_probe_thread(void *arg) -{ - int type = (unsigned long) arg; - struct mod_status *st = &stat[type]; - int rc; - unsigned long flags; - - mutex_lock(&usu_probe_mutex); - rc = request_module(bias_names[type]); - spin_lock_irqsave(&usu_lock, flags); - if (rc == 0 && (st->fls & USU_MOD_FL_PRESENT) == 0) { - /* - * This should not happen, but let us keep tabs on it. - */ - printk(KERN_NOTICE "libusual: " - "modprobe for %s succeeded, but module is not present\n", - bias_names[type]); - } - st->fls &= ~USU_MOD_FL_THREAD; - spin_unlock_irqrestore(&usu_lock, flags); - mutex_unlock(&usu_probe_mutex); - - complete_and_exit(&usu_end_notify, 0); -} - -/* - */ -static int __init usb_usual_init(void) -{ - int rc; - - mutex_lock(&usu_probe_mutex); - rc = usb_register(&usu_driver); - mutex_unlock(&usu_probe_mutex); - return rc; -} - -static void __exit usb_usual_exit(void) -{ - /* - * We do not check for any drivers present, because - * they keep us pinned with symbol references. - */ - - usb_deregister(&usu_driver); - - while (atomic_read(&total_threads) > 0) { - wait_for_completion(&usu_end_notify); - atomic_dec(&total_threads); - } -} - -/* - * Validate and accept the bias parameter. - */ -static int usu_set_bias(const char *bias_s, struct kernel_param *kp) -{ - int i; - int len; - int bias_n = 0; - - len = strlen(bias_s); - if (len == 0) - return -EDOM; - if (bias_s[len-1] == '\n') - --len; - - for (i = 1; i < 3; i++) { - if (strncmp(bias_s, bias_names[i], len) == 0) { - bias_n = i; - break; - } - } - if (bias_n == 0) - return -EINVAL; - - atomic_set(&usu_bias, bias_n); - return 0; -} - -static int usu_get_bias(char *buffer, struct kernel_param *kp) -{ - return strlen(strcpy(buffer, bias_names[atomic_read(&usu_bias)])); -} - -module_init(usb_usual_init); -module_exit(usb_usual_exit); - -module_param_call(bias, usu_set_bias, usu_get_bias, NULL, S_IRUGO|S_IWUSR); -__MODULE_PARM_TYPE(bias, "string"); -MODULE_PARM_DESC(bias, "Bias to usb-storage or ub"); - -MODULE_LICENSE("GPL"); diff --git a/drivers/usb/storage/onetouch.c b/drivers/usb/storage/onetouch.c index 886567a3806d..cb79de61f4c8 100644 --- a/drivers/usb/storage/onetouch.c +++ b/drivers/usb/storage/onetouch.c @@ -67,7 +67,7 @@ struct usb_onetouch { vendorName, productName, useProtocol, useTransport, \ initFunction, flags) \ { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ - .driver_info = (flags)|(USB_US_TYPE_STOR<<24) } + .driver_info = (flags) } static struct usb_device_id onetouch_usb_ids[] = { # include "unusual_onetouch.h" diff --git a/drivers/usb/storage/realtek_cr.c b/drivers/usb/storage/realtek_cr.c index 63cf2822e299..d36446dd7ae8 100644 --- a/drivers/usb/storage/realtek_cr.c +++ b/drivers/usb/storage/realtek_cr.c @@ -172,7 +172,7 @@ static int init_realtek_cr(struct us_data *us); initFunction, flags) \ {\ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ - .driver_info = (flags)|(USB_US_TYPE_STOR<<24)\ + .driver_info = (flags) \ } static const struct usb_device_id realtek_cr_ids[] = { diff --git a/drivers/usb/storage/sddr09.c b/drivers/usb/storage/sddr09.c index 3252a62b31bc..7bd54e0d5120 100644 --- a/drivers/usb/storage/sddr09.c +++ b/drivers/usb/storage/sddr09.c @@ -69,7 +69,7 @@ static int usb_stor_sddr09_init(struct us_data *us); vendorName, productName, useProtocol, useTransport, \ initFunction, flags) \ { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ - .driver_info = (flags)|(USB_US_TYPE_STOR<<24) } + .driver_info = (flags) } static struct usb_device_id sddr09_usb_ids[] = { # include "unusual_sddr09.h" diff --git a/drivers/usb/storage/sddr55.c b/drivers/usb/storage/sddr55.c index c144078065a7..d278c5a99b7a 100644 --- a/drivers/usb/storage/sddr55.c +++ b/drivers/usb/storage/sddr55.c @@ -46,7 +46,7 @@ MODULE_LICENSE("GPL"); vendorName, productName, useProtocol, useTransport, \ initFunction, flags) \ { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ - .driver_info = (flags)|(USB_US_TYPE_STOR<<24) } + .driver_info = (flags) } static struct usb_device_id sddr55_usb_ids[] = { # include "unusual_sddr55.h" diff --git a/drivers/usb/storage/shuttle_usbat.c b/drivers/usb/storage/shuttle_usbat.c index fa1ceebc465c..daf2fc58ae02 100644 --- a/drivers/usb/storage/shuttle_usbat.c +++ b/drivers/usb/storage/shuttle_usbat.c @@ -168,7 +168,7 @@ static int init_usbat_flash(struct us_data *us); vendorName, productName, useProtocol, useTransport, \ initFunction, flags) \ { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ - .driver_info = (flags)|(USB_US_TYPE_STOR<<24) } + .driver_info = (flags) } static struct usb_device_id usbat_usb_ids[] = { # include "unusual_usbat.h" diff --git a/drivers/usb/storage/sierra_ms.c b/drivers/usb/storage/sierra_ms.c index 37539c89e3ba..17e36952bced 100644 --- a/drivers/usb/storage/sierra_ms.c +++ b/drivers/usb/storage/sierra_ms.c @@ -130,14 +130,13 @@ int sierra_ms_init(struct us_data *us) struct swoc_info *swocInfo; struct usb_device *udev; struct Scsi_Host *sh; - struct scsi_device *sd; retries = 3; result = 0; udev = us->pusb_dev; sh = us_to_host(us); - sd = scsi_get_host_dev(sh); + scsi_get_host_dev(sh); US_DEBUGP("SWIMS: sierra_ms_init called\n"); diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c index c70109e5d60b..c0543c83923e 100644 --- a/drivers/usb/storage/transport.c +++ b/drivers/usb/storage/transport.c @@ -1331,7 +1331,7 @@ int usb_stor_port_reset(struct us_data *us) int result; /*for these devices we must use the class specific method */ - if (us->pusb_dev->quirks & USB_QUIRK_RESET_MORPHS) + if (us->pusb_dev->quirks & USB_QUIRK_RESET) return -EPERM; result = usb_lock_device_for_reset(us->pusb_dev, us->pusb_intf); diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c index 638cd64f9610..98b98eef7527 100644 --- a/drivers/usb/storage/uas.c +++ b/drivers/usb/storage/uas.c @@ -41,6 +41,7 @@ struct sense_iu_old { struct uas_dev_info { struct usb_interface *intf; struct usb_device *udev; + struct usb_anchor cmd_urbs; struct usb_anchor sense_urbs; struct usb_anchor data_urbs; int qdepth, resetting; @@ -49,6 +50,7 @@ struct uas_dev_info { unsigned use_streams:1; unsigned uas_sense_old:1; struct scsi_cmnd *cmnd; + spinlock_t lock; }; enum { @@ -63,13 +65,13 @@ enum { DATA_IN_URB_INFLIGHT = (1 << 9), DATA_OUT_URB_INFLIGHT = (1 << 10), COMMAND_COMPLETED = (1 << 11), + COMMAND_ABORTED = (1 << 12), }; /* Overrides scsi_pointer */ struct uas_cmd_info { unsigned int state; unsigned int stream; - unsigned int aborted; struct urb *cmd_urb; struct urb *data_in_urb; struct urb *data_out_urb; @@ -90,6 +92,7 @@ static void uas_do_work(struct work_struct *work) struct uas_cmd_info *cmdinfo; struct uas_cmd_info *temp; struct list_head list; + unsigned long flags; int err; spin_lock_irq(&uas_work_lock); @@ -100,7 +103,10 @@ static void uas_do_work(struct work_struct *work) struct scsi_pointer *scp = (void *)cmdinfo; struct scsi_cmnd *cmnd = container_of(scp, struct scsi_cmnd, SCp); - err = uas_submit_urbs(cmnd, cmnd->device->hostdata, GFP_NOIO); + struct uas_dev_info *devinfo = (void *)cmnd->device->hostdata; + spin_lock_irqsave(&devinfo->lock, flags); + err = uas_submit_urbs(cmnd, cmnd->device->hostdata, GFP_ATOMIC); + spin_unlock_irqrestore(&devinfo->lock, flags); if (err) { list_del(&cmdinfo->list); spin_lock_irq(&uas_work_lock); @@ -162,7 +168,7 @@ static void uas_log_cmd_state(struct scsi_cmnd *cmnd, const char *caller) struct uas_cmd_info *ci = (void *)&cmnd->SCp; scmd_printk(KERN_INFO, cmnd, "%s %p tag %d, inflight:" - "%s%s%s%s%s%s%s%s%s%s%s\n", + "%s%s%s%s%s%s%s%s%s%s%s%s\n", caller, cmnd, cmnd->request->tag, (ci->state & SUBMIT_STATUS_URB) ? " s-st" : "", (ci->state & ALLOC_DATA_IN_URB) ? " a-in" : "", @@ -174,13 +180,16 @@ static void uas_log_cmd_state(struct scsi_cmnd *cmnd, const char *caller) (ci->state & COMMAND_INFLIGHT) ? " CMD" : "", (ci->state & DATA_IN_URB_INFLIGHT) ? " IN" : "", (ci->state & DATA_OUT_URB_INFLIGHT) ? " OUT" : "", - (ci->state & COMMAND_COMPLETED) ? " done" : ""); + (ci->state & COMMAND_COMPLETED) ? " done" : "", + (ci->state & COMMAND_ABORTED) ? " abort" : ""); } static int uas_try_complete(struct scsi_cmnd *cmnd, const char *caller) { struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp; + struct uas_dev_info *devinfo = (void *)cmnd->device->hostdata; + WARN_ON(!spin_is_locked(&devinfo->lock)); if (cmdinfo->state & (COMMAND_INFLIGHT | DATA_IN_URB_INFLIGHT | DATA_OUT_URB_INFLIGHT)) @@ -189,6 +198,10 @@ static int uas_try_complete(struct scsi_cmnd *cmnd, const char *caller) cmdinfo->state |= COMMAND_COMPLETED; usb_free_urb(cmdinfo->data_in_urb); usb_free_urb(cmdinfo->data_out_urb); + if (cmdinfo->state & COMMAND_ABORTED) { + scmd_printk(KERN_INFO, cmnd, "abort completed\n"); + cmnd->result = DID_ABORT << 16; + } cmnd->scsi_done(cmnd); return 0; } @@ -216,6 +229,7 @@ static void uas_stat_cmplt(struct urb *urb) struct uas_dev_info *devinfo = (void *)shost->hostdata[0]; struct scsi_cmnd *cmnd; struct uas_cmd_info *cmdinfo; + unsigned long flags; u16 tag; if (urb->status) { @@ -229,20 +243,24 @@ static void uas_stat_cmplt(struct urb *urb) return; } + spin_lock_irqsave(&devinfo->lock, flags); tag = be16_to_cpup(&iu->tag) - 1; if (tag == 0) cmnd = devinfo->cmnd; else cmnd = scsi_host_find_tag(shost, tag - 1); + if (!cmnd) { - if (iu->iu_id != IU_ID_RESPONSE) { - usb_free_urb(urb); - return; + if (iu->iu_id == IU_ID_RESPONSE) { + /* store results for uas_eh_task_mgmt() */ + memcpy(&devinfo->response, iu, sizeof(devinfo->response)); } - } else { - cmdinfo = (void *)&cmnd->SCp; + usb_free_urb(urb); + spin_unlock_irqrestore(&devinfo->lock, flags); + return; } + cmdinfo = (void *)&cmnd->SCp; switch (iu->iu_id) { case IU_ID_STATUS: if (devinfo->cmnd == cmnd) @@ -256,10 +274,16 @@ static void uas_stat_cmplt(struct urb *urb) uas_sense(urb, cmnd); if (cmnd->result != 0) { /* cancel data transfers on error */ - if (cmdinfo->state & DATA_IN_URB_INFLIGHT) + if (cmdinfo->state & DATA_IN_URB_INFLIGHT) { + spin_unlock_irqrestore(&devinfo->lock, flags); usb_unlink_urb(cmdinfo->data_in_urb); - if (cmdinfo->state & DATA_OUT_URB_INFLIGHT) + spin_lock_irqsave(&devinfo->lock, flags); + } + if (cmdinfo->state & DATA_OUT_URB_INFLIGHT) { + spin_unlock_irqrestore(&devinfo->lock, flags); usb_unlink_urb(cmdinfo->data_out_urb); + spin_lock_irqsave(&devinfo->lock, flags); + } } cmdinfo->state &= ~COMMAND_INFLIGHT; uas_try_complete(cmnd, __func__); @@ -270,23 +294,23 @@ static void uas_stat_cmplt(struct urb *urb) case IU_ID_WRITE_READY: uas_xfer_data(urb, cmnd, SUBMIT_DATA_OUT_URB); break; - case IU_ID_RESPONSE: - /* store results for uas_eh_task_mgmt() */ - memcpy(&devinfo->response, iu, sizeof(devinfo->response)); - break; default: scmd_printk(KERN_ERR, cmnd, "Bogus IU (%d) received on status pipe\n", iu->iu_id); } usb_free_urb(urb); + spin_unlock_irqrestore(&devinfo->lock, flags); } static void uas_data_cmplt(struct urb *urb) { struct scsi_cmnd *cmnd = urb->context; struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp; + struct uas_dev_info *devinfo = (void *)cmnd->device->hostdata; struct scsi_data_buffer *sdb = NULL; + unsigned long flags; + spin_lock_irqsave(&devinfo->lock, flags); if (cmdinfo->data_in_urb == urb) { sdb = scsi_in(cmnd); cmdinfo->state &= ~DATA_IN_URB_INFLIGHT; @@ -301,10 +325,8 @@ static void uas_data_cmplt(struct urb *urb) } else { sdb->resid = sdb->length - urb->actual_length; } - if (cmdinfo->aborted) { - return; - } uas_try_complete(cmnd, __func__); + spin_unlock_irqrestore(&devinfo->lock, flags); } static struct urb *uas_alloc_data_urb(struct uas_dev_info *devinfo, gfp_t gfp, @@ -431,6 +453,7 @@ static int uas_submit_task_urb(struct scsi_cmnd *cmnd, gfp_t gfp, err = usb_submit_urb(urb, gfp); if (err) goto err; + usb_anchor_urb(urb, &devinfo->cmd_urbs); return 0; @@ -470,6 +493,7 @@ static int uas_submit_urbs(struct scsi_cmnd *cmnd, struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp; int err; + WARN_ON(!spin_is_locked(&devinfo->lock)); if (cmdinfo->state & SUBMIT_STATUS_URB) { err = uas_submit_sense_urb(cmnd->device->host, gfp, cmdinfo->stream); @@ -521,18 +545,22 @@ static int uas_submit_urbs(struct scsi_cmnd *cmnd, if (cmdinfo->state & ALLOC_CMD_URB) { cmdinfo->cmd_urb = uas_alloc_cmd_urb(devinfo, gfp, cmnd, - cmdinfo->stream); + cmdinfo->stream); if (!cmdinfo->cmd_urb) return SCSI_MLQUEUE_DEVICE_BUSY; cmdinfo->state &= ~ALLOC_CMD_URB; } if (cmdinfo->state & SUBMIT_CMD_URB) { + usb_get_urb(cmdinfo->cmd_urb); if (usb_submit_urb(cmdinfo->cmd_urb, gfp)) { scmd_printk(KERN_INFO, cmnd, "cmd urb submission failure\n"); return SCSI_MLQUEUE_DEVICE_BUSY; } + usb_anchor_urb(cmdinfo->cmd_urb, &devinfo->cmd_urbs); + usb_put_urb(cmdinfo->cmd_urb); + cmdinfo->cmd_urb = NULL; cmdinfo->state &= ~SUBMIT_CMD_URB; cmdinfo->state |= COMMAND_INFLIGHT; } @@ -546,12 +574,16 @@ static int uas_queuecommand_lck(struct scsi_cmnd *cmnd, struct scsi_device *sdev = cmnd->device; struct uas_dev_info *devinfo = sdev->hostdata; struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp; + unsigned long flags; int err; BUILD_BUG_ON(sizeof(struct uas_cmd_info) > sizeof(struct scsi_pointer)); - if (devinfo->cmnd) + spin_lock_irqsave(&devinfo->lock, flags); + if (devinfo->cmnd) { + spin_unlock_irqrestore(&devinfo->lock, flags); return SCSI_MLQUEUE_DEVICE_BUSY; + } if (blk_rq_tagged(cmnd->request)) { cmdinfo->stream = cmnd->request->tag + 2; @@ -564,7 +596,6 @@ static int uas_queuecommand_lck(struct scsi_cmnd *cmnd, cmdinfo->state = SUBMIT_STATUS_URB | ALLOC_CMD_URB | SUBMIT_CMD_URB; - cmdinfo->aborted = 0; switch (cmnd->sc_data_direction) { case DMA_FROM_DEVICE: @@ -587,6 +618,7 @@ static int uas_queuecommand_lck(struct scsi_cmnd *cmnd, if (err) { /* If we did nothing, give up now */ if (cmdinfo->state & SUBMIT_STATUS_URB) { + spin_unlock_irqrestore(&devinfo->lock, flags); return SCSI_MLQUEUE_DEVICE_BUSY; } spin_lock(&uas_work_lock); @@ -595,6 +627,7 @@ static int uas_queuecommand_lck(struct scsi_cmnd *cmnd, schedule_work(&uas_work); } + spin_unlock_irqrestore(&devinfo->lock, flags); return 0; } @@ -605,22 +638,28 @@ static int uas_eh_task_mgmt(struct scsi_cmnd *cmnd, { struct Scsi_Host *shost = cmnd->device->host; struct uas_dev_info *devinfo = (void *)shost->hostdata[0]; - u16 tag = 9999; /* FIXME */ + u16 tag = devinfo->qdepth - 1; + unsigned long flags; + spin_lock_irqsave(&devinfo->lock, flags); memset(&devinfo->response, 0, sizeof(devinfo->response)); - if (uas_submit_sense_urb(shost, GFP_NOIO, tag)) { + if (uas_submit_sense_urb(shost, GFP_ATOMIC, tag)) { shost_printk(KERN_INFO, shost, "%s: %s: submit sense urb failed\n", __func__, fname); + spin_unlock_irqrestore(&devinfo->lock, flags); return FAILED; } - if (uas_submit_task_urb(cmnd, GFP_NOIO, function, tag)) { + if (uas_submit_task_urb(cmnd, GFP_ATOMIC, function, tag)) { shost_printk(KERN_INFO, shost, "%s: %s: submit task mgmt urb failed\n", __func__, fname); + spin_unlock_irqrestore(&devinfo->lock, flags); return FAILED; } - if (0 == usb_wait_anchor_empty_timeout(&devinfo->sense_urbs, 3000)) { + spin_unlock_irqrestore(&devinfo->lock, flags); + + if (usb_wait_anchor_empty_timeout(&devinfo->sense_urbs, 3000) == 0) { shost_printk(KERN_INFO, shost, "%s: %s timed out\n", __func__, fname); return FAILED; @@ -643,15 +682,15 @@ static int uas_eh_task_mgmt(struct scsi_cmnd *cmnd, static int uas_eh_abort_handler(struct scsi_cmnd *cmnd) { struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp; + struct uas_dev_info *devinfo = (void *)cmnd->device->hostdata; + unsigned long flags; int ret; uas_log_cmd_state(cmnd, __func__); - cmdinfo->aborted = 1; + spin_lock_irqsave(&devinfo->lock, flags); + cmdinfo->state |= COMMAND_ABORTED; + spin_unlock_irqrestore(&devinfo->lock, flags); ret = uas_eh_task_mgmt(cmnd, "ABORT TASK", TMF_ABORT_TASK); - if (cmdinfo->state & DATA_IN_URB_INFLIGHT) - usb_kill_urb(cmdinfo->data_in_urb); - if (cmdinfo->state & DATA_OUT_URB_INFLIGHT) - usb_kill_urb(cmdinfo->data_out_urb); return ret; } @@ -670,6 +709,7 @@ static int uas_eh_bus_reset_handler(struct scsi_cmnd *cmnd) int err; devinfo->resetting = 1; + usb_kill_anchored_urbs(&devinfo->cmd_urbs); usb_kill_anchored_urbs(&devinfo->sense_urbs); usb_kill_anchored_urbs(&devinfo->data_urbs); err = usb_reset_device(udev); @@ -694,7 +734,7 @@ static int uas_slave_configure(struct scsi_device *sdev) { struct uas_dev_info *devinfo = sdev->hostdata; scsi_set_tag_type(sdev, MSG_ORDERED_TAG); - scsi_activate_tcq(sdev, devinfo->qdepth - 2); + scsi_activate_tcq(sdev, devinfo->qdepth - 3); return 0; } @@ -868,11 +908,13 @@ static int uas_probe(struct usb_interface *intf, const struct usb_device_id *id) devinfo->intf = intf; devinfo->udev = udev; devinfo->resetting = 0; + init_usb_anchor(&devinfo->cmd_urbs); init_usb_anchor(&devinfo->sense_urbs); init_usb_anchor(&devinfo->data_urbs); + spin_lock_init(&devinfo->lock); uas_configure_endpoints(devinfo); - result = scsi_init_shared_tag_map(shost, devinfo->qdepth - 2); + result = scsi_init_shared_tag_map(shost, devinfo->qdepth - 3); if (result) goto free; @@ -913,6 +955,7 @@ static void uas_disconnect(struct usb_interface *intf) struct uas_dev_info *devinfo = (void *)shost->hostdata[0]; scsi_remove_host(shost); + usb_kill_anchored_urbs(&devinfo->cmd_urbs); usb_kill_anchored_urbs(&devinfo->sense_urbs); usb_kill_anchored_urbs(&devinfo->data_urbs); uas_free_streams(devinfo); diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 62a31bea0634..779cd954abcb 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -2038,25 +2038,25 @@ UNUSUAL_DEV( 0xed10, 0x7636, 0x0001, 0x0001, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ), /* Control/Bulk transport for all SubClass values */ -USUAL_DEV(USB_SC_RBC, USB_PR_CB, USB_US_TYPE_STOR), -USUAL_DEV(USB_SC_8020, USB_PR_CB, USB_US_TYPE_STOR), -USUAL_DEV(USB_SC_QIC, USB_PR_CB, USB_US_TYPE_STOR), -USUAL_DEV(USB_SC_UFI, USB_PR_CB, USB_US_TYPE_STOR), -USUAL_DEV(USB_SC_8070, USB_PR_CB, USB_US_TYPE_STOR), -USUAL_DEV(USB_SC_SCSI, USB_PR_CB, USB_US_TYPE_STOR), +USUAL_DEV(USB_SC_RBC, USB_PR_CB), +USUAL_DEV(USB_SC_8020, USB_PR_CB), +USUAL_DEV(USB_SC_QIC, USB_PR_CB), +USUAL_DEV(USB_SC_UFI, USB_PR_CB), +USUAL_DEV(USB_SC_8070, USB_PR_CB), +USUAL_DEV(USB_SC_SCSI, USB_PR_CB), /* Control/Bulk/Interrupt transport for all SubClass values */ -USUAL_DEV(USB_SC_RBC, USB_PR_CBI, USB_US_TYPE_STOR), -USUAL_DEV(USB_SC_8020, USB_PR_CBI, USB_US_TYPE_STOR), -USUAL_DEV(USB_SC_QIC, USB_PR_CBI, USB_US_TYPE_STOR), -USUAL_DEV(USB_SC_UFI, USB_PR_CBI, USB_US_TYPE_STOR), -USUAL_DEV(USB_SC_8070, USB_PR_CBI, USB_US_TYPE_STOR), -USUAL_DEV(USB_SC_SCSI, USB_PR_CBI, USB_US_TYPE_STOR), +USUAL_DEV(USB_SC_RBC, USB_PR_CBI), +USUAL_DEV(USB_SC_8020, USB_PR_CBI), +USUAL_DEV(USB_SC_QIC, USB_PR_CBI), +USUAL_DEV(USB_SC_UFI, USB_PR_CBI), +USUAL_DEV(USB_SC_8070, USB_PR_CBI), +USUAL_DEV(USB_SC_SCSI, USB_PR_CBI), /* Bulk-only transport for all SubClass values */ -USUAL_DEV(USB_SC_RBC, USB_PR_BULK, USB_US_TYPE_STOR), -USUAL_DEV(USB_SC_8020, USB_PR_BULK, USB_US_TYPE_STOR), -USUAL_DEV(USB_SC_QIC, USB_PR_BULK, USB_US_TYPE_STOR), -USUAL_DEV(USB_SC_UFI, USB_PR_BULK, USB_US_TYPE_STOR), -USUAL_DEV(USB_SC_8070, USB_PR_BULK, USB_US_TYPE_STOR), -USUAL_DEV(USB_SC_SCSI, USB_PR_BULK, 0), +USUAL_DEV(USB_SC_RBC, USB_PR_BULK), +USUAL_DEV(USB_SC_8020, USB_PR_BULK), +USUAL_DEV(USB_SC_QIC, USB_PR_BULK), +USUAL_DEV(USB_SC_UFI, USB_PR_BULK), +USUAL_DEV(USB_SC_8070, USB_PR_BULK), +USUAL_DEV(USB_SC_SCSI, USB_PR_BULK), diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index d012fe4329e7..12aa72630aed 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -114,7 +114,7 @@ MODULE_PARM_DESC(quirks, "supplemental list of device IDs and their quirks"); #define COMPLIANT_DEV UNUSUAL_DEV -#define USUAL_DEV(use_protocol, use_transport, use_type) \ +#define USUAL_DEV(use_protocol, use_transport) \ { \ .useProtocol = use_protocol, \ .useTransport = use_transport, \ @@ -126,7 +126,7 @@ static struct us_unusual_dev us_unusual_dev_list[] = { }; static struct us_unusual_dev for_dynamic_ids = - USUAL_DEV(USB_SC_SCSI, USB_PR_BULK, 0); + USUAL_DEV(USB_SC_SCSI, USB_PR_BULK); #undef UNUSUAL_DEV #undef COMPLIANT_DEV @@ -564,7 +564,7 @@ static int get_device_info(struct us_data *us, const struct usb_device_id *id, us->protocol = (unusual_dev->useTransport == USB_PR_DEVICE) ? idesc->bInterfaceProtocol : unusual_dev->useTransport; - us->fflags = USB_US_ORIG_FLAGS(id->driver_info); + us->fflags = id->driver_info; adjust_quirks(us); if (us->fflags & US_FL_IGNORE_DEVICE) { @@ -1041,13 +1041,10 @@ static int storage_probe(struct usb_interface *intf, int size; /* - * If libusual is configured, let it decide whether a standard - * device should be handled by usb-storage or by ub. * If the device isn't standard (is handled by a subdriver * module) then don't accept it. */ - if (usb_usual_check_type(id, USB_US_TYPE_STOR) || - usb_usual_ignore_device(intf)) + if (usb_usual_ignore_device(intf)) return -ENXIO; /* @@ -1105,10 +1102,8 @@ static int __init usb_stor_init(void) /* register the driver, return usb_register return code if error */ retval = usb_register(&usb_storage_driver); - if (retval == 0) { + if (retval == 0) pr_info("USB Mass Storage support registered.\n"); - usb_usual_set_present(USB_US_TYPE_STOR); - } return retval; } @@ -1122,8 +1117,6 @@ static void __exit usb_stor_exit(void) */ US_DEBUGP("-- calling usb_deregister()\n"); usb_deregister(&usb_storage_driver) ; - - usb_usual_clear_present(USB_US_TYPE_STOR); } module_init(usb_stor_init); diff --git a/drivers/usb/storage/usual-tables.c b/drivers/usb/storage/usual-tables.c index b96927914f89..b78a526910fb 100644 --- a/drivers/usb/storage/usual-tables.c +++ b/drivers/usb/storage/usual-tables.c @@ -34,31 +34,23 @@ vendorName, productName, useProtocol, useTransport, \ initFunction, flags) \ { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ - .driver_info = (flags)|(USB_US_TYPE_STOR<<24) } - -#define COMPLIANT_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ - vendorName, productName, useProtocol, useTransport, \ - initFunction, flags) \ -{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ .driver_info = (flags) } -#define USUAL_DEV(useProto, useTrans, useType) \ -{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, useProto, useTrans), \ - .driver_info = ((useType)<<24) } +#define COMPLIANT_DEV UNUSUAL_DEV + +#define USUAL_DEV(useProto, useTrans) \ +{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, useProto, useTrans) } struct usb_device_id usb_storage_usb_ids[] = { # include "unusual_devs.h" { } /* Terminating entry */ }; -EXPORT_SYMBOL_GPL(usb_storage_usb_ids); - MODULE_DEVICE_TABLE(usb, usb_storage_usb_ids); #undef UNUSUAL_DEV #undef COMPLIANT_DEV #undef USUAL_DEV - /* * The table of devices to ignore */ @@ -95,7 +87,6 @@ static struct ignore_entry ignore_ids[] = { #undef UNUSUAL_DEV - /* Return an error if a device is in the ignore_ids list */ int usb_usual_ignore_device(struct usb_interface *intf) { @@ -115,4 +106,3 @@ int usb_usual_ignore_device(struct usb_interface *intf) } return 0; } -EXPORT_SYMBOL_GPL(usb_usual_ignore_device); diff --git a/drivers/usb/wusbcore/Kconfig b/drivers/usb/wusbcore/Kconfig index f29fdd7f6d75..8bf19760d447 100644 --- a/drivers/usb/wusbcore/Kconfig +++ b/drivers/usb/wusbcore/Kconfig @@ -2,8 +2,7 @@ # Wireless USB Core configuration # config USB_WUSB - tristate "Enable Wireless USB extensions (EXPERIMENTAL)" - depends on EXPERIMENTAL + tristate "Enable Wireless USB extensions" depends on USB depends on PCI depends on UWB diff --git a/drivers/usb/wusbcore/security.c b/drivers/usb/wusbcore/security.c index fa810a83e830..dd88441c8f78 100644 --- a/drivers/usb/wusbcore/security.c +++ b/drivers/usb/wusbcore/security.c @@ -202,7 +202,7 @@ int wusb_dev_sec_add(struct wusbhc *wusbhc, { int result, bytes, secd_size; struct device *dev = &usb_dev->dev; - struct usb_security_descriptor *secd; + struct usb_security_descriptor *secd, *new_secd; const struct usb_encryption_descriptor *etd, *ccm1_etd = NULL; const void *itr, *top; char buf[64]; @@ -221,11 +221,12 @@ int wusb_dev_sec_add(struct wusbhc *wusbhc, goto out; } secd_size = le16_to_cpu(secd->wTotalLength); - secd = krealloc(secd, secd_size, GFP_KERNEL); - if (secd == NULL) { + new_secd = krealloc(secd, secd_size, GFP_KERNEL); + if (new_secd == NULL) { dev_err(dev, "Can't allocate space for security descriptors\n"); goto out; } + secd = new_secd; result = usb_get_descriptor(usb_dev, USB_DT_SECURITY, 0, secd, secd_size); if (result < secd_size) { diff --git a/drivers/usb/wusbcore/wa-hc.c b/drivers/usb/wusbcore/wa-hc.c index 9e4a92461688..a09b65ebd9bb 100644 --- a/drivers/usb/wusbcore/wa-hc.c +++ b/drivers/usb/wusbcore/wa-hc.c @@ -46,8 +46,10 @@ int wa_create(struct wahc *wa, struct usb_interface *iface) wa->dto_epd = &iface->cur_altsetting->endpoint[2].desc; wa->xfer_result_size = usb_endpoint_maxp(wa->dti_epd); wa->xfer_result = kmalloc(wa->xfer_result_size, GFP_KERNEL); - if (wa->xfer_result == NULL) + if (wa->xfer_result == NULL) { + result = -ENOMEM; goto error_xfer_result_alloc; + } result = wa_nep_create(wa, iface); if (result < 0) { dev_err(dev, "WA-CDS: can't initialize notif endpoint: %d\n", diff --git a/drivers/xen/Makefile b/drivers/xen/Makefile index d80bea5535a2..a4a3cab2f459 100644 --- a/drivers/xen/Makefile +++ b/drivers/xen/Makefile @@ -18,7 +18,7 @@ obj-$(CONFIG_XEN_PVHVM) += platform-pci.o obj-$(CONFIG_XEN_TMEM) += tmem.o obj-$(CONFIG_SWIOTLB_XEN) += swiotlb-xen.o obj-$(CONFIG_XEN_DOM0) += pcpu.o -obj-$(CONFIG_XEN_DOM0) += pci.o acpi.o +obj-$(CONFIG_XEN_DOM0) += pci.o dbgp.o acpi.o obj-$(CONFIG_XEN_MCE_LOG) += mcelog.o obj-$(CONFIG_XEN_PCIDEV_BACKEND) += xen-pciback/ obj-$(CONFIG_XEN_PRIVCMD) += xen-privcmd.o diff --git a/drivers/xen/dbgp.c b/drivers/xen/dbgp.c new file mode 100644 index 000000000000..42569c77ccc8 --- /dev/null +++ b/drivers/xen/dbgp.c @@ -0,0 +1,48 @@ +#include <linux/pci.h> +#include <linux/usb.h> +#include <linux/usb/ehci_def.h> +#include <linux/usb/hcd.h> +#include <asm/xen/hypercall.h> +#include <xen/interface/physdev.h> +#include <xen/xen.h> + +static int xen_dbgp_op(struct usb_hcd *hcd, int op) +{ + const struct device *ctrlr = hcd_to_bus(hcd)->controller; + struct physdev_dbgp_op dbgp; + + if (!xen_initial_domain()) + return 0; + + dbgp.op = op; + +#ifdef CONFIG_PCI + if (ctrlr->bus == &pci_bus_type) { + const struct pci_dev *pdev = to_pci_dev(ctrlr); + + dbgp.u.pci.seg = pci_domain_nr(pdev->bus); + dbgp.u.pci.bus = pdev->bus->number; + dbgp.u.pci.devfn = pdev->devfn; + dbgp.bus = PHYSDEVOP_DBGP_BUS_PCI; + } else +#endif + dbgp.bus = PHYSDEVOP_DBGP_BUS_UNKNOWN; + + return HYPERVISOR_physdev_op(PHYSDEVOP_dbgp_op, &dbgp); +} + +int xen_dbgp_reset_prep(struct usb_hcd *hcd) +{ + return xen_dbgp_op(hcd, PHYSDEVOP_DBGP_RESET_PREPARE); +} + +int xen_dbgp_external_startup(struct usb_hcd *hcd) +{ + return xen_dbgp_op(hcd, PHYSDEVOP_DBGP_RESET_DONE); +} + +#ifndef CONFIG_EARLY_PRINTK_DBGP +#include <linux/export.h> +EXPORT_SYMBOL_GPL(xen_dbgp_reset_prep); +EXPORT_SYMBOL_GPL(xen_dbgp_external_startup); +#endif |