diff options
Diffstat (limited to 'drivers')
70 files changed, 320 insertions, 204 deletions
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index 9baf11e86362..744f078f4dd8 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -3832,7 +3832,7 @@ static int __floppy_read_block_0(struct block_device *bdev) bio.bi_size = size; bio.bi_bdev = bdev; bio.bi_sector = 0; - bio.bi_flags = BIO_QUIET; + bio.bi_flags = (1 << BIO_QUIET); init_completion(&complete); bio.bi_private = &complete; bio.bi_end_io = floppy_rb0_complete; diff --git a/drivers/gpu/drm/gma500/cdv_device.c b/drivers/gpu/drm/gma500/cdv_device.c index 4a5b099c3bc5..53404af2e748 100644 --- a/drivers/gpu/drm/gma500/cdv_device.c +++ b/drivers/gpu/drm/gma500/cdv_device.c @@ -321,6 +321,8 @@ static int cdv_chip_setup(struct drm_device *dev) cdv_get_core_freq(dev); gma_intel_opregion_init(dev); psb_intel_init_bios(dev); + REG_WRITE(PORT_HOTPLUG_EN, 0); + REG_WRITE(PORT_HOTPLUG_STAT, REG_READ(PORT_HOTPLUG_STAT)); return 0; } diff --git a/drivers/gpu/drm/gma500/framebuffer.c b/drivers/gpu/drm/gma500/framebuffer.c index 830dfdd6bf15..be616735ec91 100644 --- a/drivers/gpu/drm/gma500/framebuffer.c +++ b/drivers/gpu/drm/gma500/framebuffer.c @@ -247,7 +247,6 @@ static struct fb_ops psbfb_roll_ops = { .fb_imageblit = cfb_imageblit, .fb_pan_display = psbfb_pan, .fb_mmap = psbfb_mmap, - .fb_sync = psbfb_sync, .fb_ioctl = psbfb_ioctl, }; diff --git a/drivers/gpu/drm/gma500/gtt.c b/drivers/gpu/drm/gma500/gtt.c index 5d5330f667f1..aff194fbe9f3 100644 --- a/drivers/gpu/drm/gma500/gtt.c +++ b/drivers/gpu/drm/gma500/gtt.c @@ -446,10 +446,9 @@ int psb_gtt_init(struct drm_device *dev, int resume) pg->gtt_start = pci_resource_start(dev->pdev, PSB_GTT_RESOURCE); gtt_pages = pci_resource_len(dev->pdev, PSB_GTT_RESOURCE) >> PAGE_SHIFT; - /* Some CDV firmware doesn't report this currently. In which case the - system has 64 gtt pages */ + /* CDV doesn't report this. In which case the system has 64 gtt pages */ if (pg->gtt_start == 0 || gtt_pages == 0) { - dev_err(dev->dev, "GTT PCI BAR not initialized.\n"); + dev_dbg(dev->dev, "GTT PCI BAR not initialized.\n"); gtt_pages = 64; pg->gtt_start = dev_priv->pge_ctl; } @@ -461,10 +460,10 @@ int psb_gtt_init(struct drm_device *dev, int resume) if (pg->gatt_pages == 0 || pg->gatt_start == 0) { static struct resource fudge; /* Preferably peppermint */ - /* This can occur on CDV SDV systems. Fudge it in this case. + /* This can occur on CDV systems. Fudge it in this case. We really don't care what imaginary space is being allocated at this point */ - dev_err(dev->dev, "GATT PCI BAR not initialized.\n"); + dev_dbg(dev->dev, "GATT PCI BAR not initialized.\n"); pg->gatt_start = 0x40000000; pg->gatt_pages = (128 * 1024 * 1024) >> PAGE_SHIFT; /* This is a little confusing but in fact the GTT is providing diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index b8574cddd953..63552e30d0c3 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -59,6 +59,9 @@ #define USB_VENDOR_ID_AIRCABLE 0x16CA #define USB_DEVICE_ID_AIRCABLE1 0x1502 +#define USB_VENDOR_ID_AIREN 0x1a2c +#define USB_DEVICE_ID_AIREN_SLIMPLUS 0x0002 + #define USB_VENDOR_ID_ALCOR 0x058f #define USB_DEVICE_ID_ALCOR_USBRS232 0x9720 diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c index 9333d692a786..627850a54d34 100644 --- a/drivers/hid/hid-input.c +++ b/drivers/hid/hid-input.c @@ -986,8 +986,13 @@ void hidinput_hid_event(struct hid_device *hid, struct hid_field *field, struct return; } - /* Ignore out-of-range values as per HID specification, section 5.10 */ - if (value < field->logical_minimum || value > field->logical_maximum) { + /* + * Ignore out-of-range values as per HID specification, + * section 5.10 and 6.2.25 + */ + if ((field->flags & HID_MAIN_ITEM_VARIABLE) && + (value < field->logical_minimum || + value > field->logical_maximum)) { dbg_hid("Ignoring out-of-range value %x\n", value); return; } diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c index c831af937481..57d4e1e1df48 100644 --- a/drivers/hid/usbhid/hid-quirks.c +++ b/drivers/hid/usbhid/hid-quirks.c @@ -54,6 +54,7 @@ static const struct hid_blacklist { { USB_VENDOR_ID_PLAYDOTCOM, USB_DEVICE_ID_PLAYDOTCOM_EMS_USBII, HID_QUIRK_MULTI_INPUT }, { USB_VENDOR_ID_TOUCHPACK, USB_DEVICE_ID_TOUCHPACK_RTS, HID_QUIRK_MULTI_INPUT }, + { USB_VENDOR_ID_AIREN, USB_DEVICE_ID_AIREN_SLIMPLUS, HID_QUIRK_NOGET }, { USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_UC100KM, HID_QUIRK_NOGET }, { USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_CS124U, HID_QUIRK_NOGET }, { USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_2PORTKVM, HID_QUIRK_NOGET }, diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 02260406b9e4..dad895fec62a 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -497,8 +497,9 @@ config SENSORS_JC42 If you say yes here, you get support for JEDEC JC42.4 compliant temperature sensors, which are used on many DDR3 memory modules for mobile devices and servers. Support will include, but not be limited - to, ADT7408, CAT34TS02, CAT6095, MAX6604, MCP9805, MCP98242, MCP98243, - MCP9843, SE97, SE98, STTS424(E), TSE2002B3, and TS3000B3. + to, ADT7408, AT30TS00, CAT34TS02, CAT6095, MAX6604, MCP9804, MCP9805, + MCP98242, MCP98243, MCP9843, SE97, SE98, STTS424(E), STTS2002, + STTS3000, TSE2002B3, TSE2002GB2, TS3000B3, and TS3000GB2. This driver can also be built as a module. If so, the module will be called jc42. diff --git a/drivers/hwmon/jc42.c b/drivers/hwmon/jc42.c index 28c09eead36b..b927ee5ccdd7 100644 --- a/drivers/hwmon/jc42.c +++ b/drivers/hwmon/jc42.c @@ -64,6 +64,7 @@ static const unsigned short normal_i2c[] = { /* Manufacturer IDs */ #define ADT_MANID 0x11d4 /* Analog Devices */ +#define ATMEL_MANID 0x001f /* Atmel */ #define MAX_MANID 0x004d /* Maxim */ #define IDT_MANID 0x00b3 /* IDT */ #define MCP_MANID 0x0054 /* Microchip */ @@ -77,15 +78,25 @@ static const unsigned short normal_i2c[] = { #define ADT7408_DEVID 0x0801 #define ADT7408_DEVID_MASK 0xffff +/* Atmel */ +#define AT30TS00_DEVID 0x8201 +#define AT30TS00_DEVID_MASK 0xffff + /* IDT */ #define TS3000B3_DEVID 0x2903 /* Also matches TSE2002B3 */ #define TS3000B3_DEVID_MASK 0xffff +#define TS3000GB2_DEVID 0x2912 /* Also matches TSE2002GB2 */ +#define TS3000GB2_DEVID_MASK 0xffff + /* Maxim */ #define MAX6604_DEVID 0x3e00 #define MAX6604_DEVID_MASK 0xffff /* Microchip */ +#define MCP9804_DEVID 0x0200 +#define MCP9804_DEVID_MASK 0xfffc + #define MCP98242_DEVID 0x2000 #define MCP98242_DEVID_MASK 0xfffc @@ -113,6 +124,12 @@ static const unsigned short normal_i2c[] = { #define STTS424E_DEVID 0x0000 #define STTS424E_DEVID_MASK 0xfffe +#define STTS2002_DEVID 0x0300 +#define STTS2002_DEVID_MASK 0xffff + +#define STTS3000_DEVID 0x0200 +#define STTS3000_DEVID_MASK 0xffff + static u16 jc42_hysteresis[] = { 0, 1500, 3000, 6000 }; struct jc42_chips { @@ -123,8 +140,11 @@ struct jc42_chips { static struct jc42_chips jc42_chips[] = { { ADT_MANID, ADT7408_DEVID, ADT7408_DEVID_MASK }, + { ATMEL_MANID, AT30TS00_DEVID, AT30TS00_DEVID_MASK }, { IDT_MANID, TS3000B3_DEVID, TS3000B3_DEVID_MASK }, + { IDT_MANID, TS3000GB2_DEVID, TS3000GB2_DEVID_MASK }, { MAX_MANID, MAX6604_DEVID, MAX6604_DEVID_MASK }, + { MCP_MANID, MCP9804_DEVID, MCP9804_DEVID_MASK }, { MCP_MANID, MCP98242_DEVID, MCP98242_DEVID_MASK }, { MCP_MANID, MCP98243_DEVID, MCP98243_DEVID_MASK }, { MCP_MANID, MCP9843_DEVID, MCP9843_DEVID_MASK }, @@ -133,6 +153,8 @@ static struct jc42_chips jc42_chips[] = { { NXP_MANID, SE98_DEVID, SE98_DEVID_MASK }, { STM_MANID, STTS424_DEVID, STTS424_DEVID_MASK }, { STM_MANID, STTS424E_DEVID, STTS424E_DEVID_MASK }, + { STM_MANID, STTS2002_DEVID, STTS2002_DEVID_MASK }, + { STM_MANID, STTS3000_DEVID, STTS3000_DEVID_MASK }, }; /* Each client has this additional data */ @@ -159,10 +181,12 @@ static struct jc42_data *jc42_update_device(struct device *dev); static const struct i2c_device_id jc42_id[] = { { "adt7408", 0 }, + { "at30ts00", 0 }, { "cat94ts02", 0 }, { "cat6095", 0 }, { "jc42", 0 }, { "max6604", 0 }, + { "mcp9804", 0 }, { "mcp9805", 0 }, { "mcp98242", 0 }, { "mcp98243", 0 }, @@ -171,8 +195,10 @@ static const struct i2c_device_id jc42_id[] = { { "se97b", 0 }, { "se98", 0 }, { "stts424", 0 }, - { "tse2002b3", 0 }, - { "ts3000b3", 0 }, + { "stts2002", 0 }, + { "stts3000", 0 }, + { "tse2002", 0 }, + { "ts3000", 0 }, { } }; MODULE_DEVICE_TABLE(i2c, jc42_id); diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c index 00460d8d8423..d89b33967a85 100644 --- a/drivers/hwmon/pmbus/pmbus_core.c +++ b/drivers/hwmon/pmbus/pmbus_core.c @@ -54,7 +54,8 @@ lcrit_alarm, crit_alarm */ #define PMBUS_IOUT_BOOLEANS_PER_PAGE 3 /* alarm, lcrit_alarm, crit_alarm */ -#define PMBUS_POUT_BOOLEANS_PER_PAGE 2 /* alarm, crit_alarm */ +#define PMBUS_POUT_BOOLEANS_PER_PAGE 3 /* cap_alarm, alarm, crit_alarm + */ #define PMBUS_MAX_BOOLEANS_PER_FAN 2 /* alarm, fault */ #define PMBUS_MAX_BOOLEANS_PER_TEMP 4 /* min_alarm, max_alarm, lcrit_alarm, crit_alarm */ diff --git a/drivers/hwmon/pmbus/zl6100.c b/drivers/hwmon/pmbus/zl6100.c index 48c7b4a716ae..880b90cf4d32 100644 --- a/drivers/hwmon/pmbus/zl6100.c +++ b/drivers/hwmon/pmbus/zl6100.c @@ -33,6 +33,7 @@ enum chips { zl2004, zl2005, zl2006, zl2008, zl2105, zl2106, zl6100, zl6105 }; struct zl6100_data { int id; ktime_t access; /* chip access time */ + int delay; /* Delay between chip accesses in uS */ struct pmbus_driver_info info; }; @@ -52,10 +53,10 @@ MODULE_PARM_DESC(delay, "Delay between chip accesses in uS"); /* Some chips need a delay between accesses */ static inline void zl6100_wait(const struct zl6100_data *data) { - if (delay) { + if (data->delay) { s64 delta = ktime_us_delta(ktime_get(), data->access); - if (delta < delay) - udelay(delay - delta); + if (delta < data->delay) + udelay(data->delay - delta); } } @@ -207,8 +208,9 @@ static int zl6100_probe(struct i2c_client *client, * can be cleared later for additional chips if tests show that it * is not needed (in other words, better be safe than sorry). */ + data->delay = delay; if (data->id == zl2004 || data->id == zl6105) - delay = 0; + data->delay = 0; /* * Since there was a direct I2C device access above, wait before diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c index afc166fcc3d9..7df5bfef2624 100644 --- a/drivers/input/evdev.c +++ b/drivers/input/evdev.c @@ -332,7 +332,7 @@ static ssize_t evdev_write(struct file *file, const char __user *buffer, struct evdev_client *client = file->private_data; struct evdev *evdev = client->evdev; struct input_event event; - int retval; + int retval = 0; if (count < input_event_size()) return -EINVAL; diff --git a/drivers/input/misc/twl4030-vibra.c b/drivers/input/misc/twl4030-vibra.c index 37651373a95b..f3bc4189a7ba 100644 --- a/drivers/input/misc/twl4030-vibra.c +++ b/drivers/input/misc/twl4030-vibra.c @@ -172,7 +172,7 @@ static void twl4030_vibra_close(struct input_dev *input) } /*** Module ***/ -#if CONFIG_PM +#if CONFIG_PM_SLEEP static int twl4030_vibra_suspend(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); @@ -189,10 +189,10 @@ static int twl4030_vibra_resume(struct device *dev) vibra_disable_leds(); return 0; } +#endif static SIMPLE_DEV_PM_OPS(twl4030_vibra_pm_ops, twl4030_vibra_suspend, twl4030_vibra_resume); -#endif static int __devinit twl4030_vibra_probe(struct platform_device *pdev) { @@ -273,9 +273,7 @@ static struct platform_driver twl4030_vibra_driver = { .driver = { .name = "twl4030-vibra", .owner = THIS_MODULE, -#ifdef CONFIG_PM .pm = &twl4030_vibra_pm_ops, -#endif }, }; module_platform_driver(twl4030_vibra_driver); diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index bd87380bd879..4c6a72d3d48c 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -952,7 +952,9 @@ static const struct alps_model_info *alps_get_model(struct psmouse *psmouse, int /* * First try "E6 report". - * ALPS should return 0,0,10 or 0,0,100 + * ALPS should return 0,0,10 or 0,0,100 if no buttons are pressed. + * The bits 0-2 of the first byte will be 1s if some buttons are + * pressed. */ param[0] = 0; if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES) || @@ -968,7 +970,8 @@ static const struct alps_model_info *alps_get_model(struct psmouse *psmouse, int psmouse_dbg(psmouse, "E6 report: %2.2x %2.2x %2.2x", param[0], param[1], param[2]); - if (param[0] != 0 || param[1] != 0 || (param[2] != 10 && param[2] != 100)) + if ((param[0] & 0xf8) != 0 || param[1] != 0 || + (param[2] != 10 && param[2] != 100)) return NULL; /* diff --git a/drivers/input/tablet/Kconfig b/drivers/input/tablet/Kconfig index 58a87755b936..e53f4081a586 100644 --- a/drivers/input/tablet/Kconfig +++ b/drivers/input/tablet/Kconfig @@ -77,6 +77,8 @@ config TABLET_USB_WACOM tristate "Wacom Intuos/Graphire tablet support (USB)" depends on USB_ARCH_HAS_HCD select USB + select NEW_LEDS + select LEDS_CLASS help Say Y here if you want to use the USB version of the Wacom Intuos or Graphire tablet. Make sure to say Y to "Mouse support" diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index 88672ec296c1..cd3ed29e0801 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -926,7 +926,7 @@ static int wacom_bpt3_touch(struct wacom_wac *wacom) { struct input_dev *input = wacom->input; unsigned char *data = wacom->data; - int count = data[1] & 0x03; + int count = data[1] & 0x07; int i; if (data[0] != 0x02) diff --git a/drivers/md/dm-flakey.c b/drivers/md/dm-flakey.c index 9fb18c147825..b280c433e4a0 100644 --- a/drivers/md/dm-flakey.c +++ b/drivers/md/dm-flakey.c @@ -323,7 +323,7 @@ static int flakey_end_io(struct dm_target *ti, struct bio *bio, * Corrupt successful READs while in down state. * If flags were specified, only corrupt those that match. */ - if (!error && bio_submitted_while_down && + if (fc->corrupt_bio_byte && !error && bio_submitted_while_down && (bio_data_dir(bio) == READ) && (fc->corrupt_bio_rw == READ) && all_corrupt_bio_flags_match(bio, fc)) corrupt_bio_data(bio, fc); diff --git a/drivers/md/dm-io.c b/drivers/md/dm-io.c index ad2eba40e319..ea5dd289fe2a 100644 --- a/drivers/md/dm-io.c +++ b/drivers/md/dm-io.c @@ -296,6 +296,8 @@ static void do_region(int rw, unsigned region, struct dm_io_region *where, unsigned offset; unsigned num_bvecs; sector_t remaining = where->count; + struct request_queue *q = bdev_get_queue(where->bdev); + sector_t discard_sectors; /* * where->count may be zero if rw holds a flush and we need to @@ -305,9 +307,12 @@ static void do_region(int rw, unsigned region, struct dm_io_region *where, /* * Allocate a suitably sized-bio. */ - num_bvecs = dm_sector_div_up(remaining, - (PAGE_SIZE >> SECTOR_SHIFT)); - num_bvecs = min_t(int, bio_get_nr_vecs(where->bdev), num_bvecs); + if (rw & REQ_DISCARD) + num_bvecs = 1; + else + num_bvecs = min_t(int, bio_get_nr_vecs(where->bdev), + dm_sector_div_up(remaining, (PAGE_SIZE >> SECTOR_SHIFT))); + bio = bio_alloc_bioset(GFP_NOIO, num_bvecs, io->client->bios); bio->bi_sector = where->sector + (where->count - remaining); bio->bi_bdev = where->bdev; @@ -315,10 +320,14 @@ static void do_region(int rw, unsigned region, struct dm_io_region *where, bio->bi_destructor = dm_bio_destructor; store_io_and_region_in_bio(bio, io, region); - /* - * Try and add as many pages as possible. - */ - while (remaining) { + if (rw & REQ_DISCARD) { + discard_sectors = min_t(sector_t, q->limits.max_discard_sectors, remaining); + bio->bi_size = discard_sectors << SECTOR_SHIFT; + remaining -= discard_sectors; + } else while (remaining) { + /* + * Try and add as many pages as possible. + */ dp->get_page(dp, &page, &len, &offset); len = min(len, to_bytes(remaining)); if (!bio_add_page(bio, page, len, offset)) diff --git a/drivers/md/dm-ioctl.c b/drivers/md/dm-ioctl.c index 31c2dc25886d..1ce84ed0b765 100644 --- a/drivers/md/dm-ioctl.c +++ b/drivers/md/dm-ioctl.c @@ -1437,7 +1437,7 @@ static int target_message(struct dm_ioctl *param, size_t param_size) if (!argc) { DMWARN("Empty message received."); - goto out; + goto out_argv; } table = dm_get_live_table(md); diff --git a/drivers/md/dm-raid.c b/drivers/md/dm-raid.c index 86cb7e5d83d5..787022c18187 100644 --- a/drivers/md/dm-raid.c +++ b/drivers/md/dm-raid.c @@ -668,7 +668,14 @@ static int super_load(struct md_rdev *rdev, struct md_rdev *refdev) return ret; sb = page_address(rdev->sb_page); - if (sb->magic != cpu_to_le32(DM_RAID_MAGIC)) { + + /* + * Two cases that we want to write new superblocks and rebuild: + * 1) New device (no matching magic number) + * 2) Device specified for rebuild (!In_sync w/ offset == 0) + */ + if ((sb->magic != cpu_to_le32(DM_RAID_MAGIC)) || + (!test_bit(In_sync, &rdev->flags) && !rdev->recovery_offset)) { super_sync(rdev->mddev, rdev); set_bit(FirstUse, &rdev->flags); @@ -745,11 +752,8 @@ static int super_init_validation(struct mddev *mddev, struct md_rdev *rdev) */ rdev_for_each(r, t, mddev) { if (!test_bit(In_sync, &r->flags)) { - if (!test_bit(FirstUse, &r->flags)) - DMERR("Superblock area of " - "rebuild device %d should have been " - "cleared.", r->raid_disk); - set_bit(FirstUse, &r->flags); + DMINFO("Device %d specified for rebuild: " + "Clearing superblock", r->raid_disk); rebuilds++; } else if (test_bit(FirstUse, &r->flags)) new_devs++; @@ -971,6 +975,7 @@ static int raid_ctr(struct dm_target *ti, unsigned argc, char **argv) INIT_WORK(&rs->md.event_work, do_table_event); ti->private = rs; + ti->num_flush_requests = 1; mutex_lock(&rs->md.reconfig_mutex); ret = md_run(&rs->md); diff --git a/drivers/md/dm-thin-metadata.c b/drivers/md/dm-thin-metadata.c index 59c4f0446ffa..237571af77fd 100644 --- a/drivers/md/dm-thin-metadata.c +++ b/drivers/md/dm-thin-metadata.c @@ -385,6 +385,7 @@ static int init_pmd(struct dm_pool_metadata *pmd, data_sm = dm_sm_disk_create(tm, nr_blocks); if (IS_ERR(data_sm)) { DMERR("sm_disk_create failed"); + dm_tm_unlock(tm, sblock); r = PTR_ERR(data_sm); goto bad; } @@ -789,6 +790,11 @@ int dm_pool_metadata_close(struct dm_pool_metadata *pmd) return 0; } +/* + * __open_device: Returns @td corresponding to device with id @dev, + * creating it if @create is set and incrementing @td->open_count. + * On failure, @td is undefined. + */ static int __open_device(struct dm_pool_metadata *pmd, dm_thin_id dev, int create, struct dm_thin_device **td) @@ -799,10 +805,16 @@ static int __open_device(struct dm_pool_metadata *pmd, struct disk_device_details details_le; /* - * Check the device isn't already open. + * If the device is already open, return it. */ list_for_each_entry(td2, &pmd->thin_devices, list) if (td2->id == dev) { + /* + * May not create an already-open device. + */ + if (create) + return -EEXIST; + td2->open_count++; *td = td2; return 0; @@ -817,6 +829,9 @@ static int __open_device(struct dm_pool_metadata *pmd, if (r != -ENODATA || !create) return r; + /* + * Create new device. + */ changed = 1; details_le.mapped_blocks = 0; details_le.transaction_id = cpu_to_le64(pmd->trans_id); @@ -882,12 +897,10 @@ static int __create_thin(struct dm_pool_metadata *pmd, r = __open_device(pmd, dev, 1, &td); if (r) { - __close_device(td); dm_btree_remove(&pmd->tl_info, pmd->root, &key, &pmd->root); dm_btree_del(&pmd->bl_info, dev_root); return r; } - td->changed = 1; __close_device(td); return r; @@ -967,14 +980,14 @@ static int __create_snap(struct dm_pool_metadata *pmd, goto bad; r = __set_snapshot_details(pmd, td, origin, pmd->time); + __close_device(td); + if (r) goto bad; - __close_device(td); return 0; bad: - __close_device(td); dm_btree_remove(&pmd->tl_info, pmd->root, &key, &pmd->root); dm_btree_remove(&pmd->details_info, pmd->details_root, &key, &pmd->details_root); @@ -1211,6 +1224,8 @@ static int __remove(struct dm_thin_device *td, dm_block_t block) if (r) return r; + td->mapped_blocks--; + td->changed = 1; pmd->need_commit = 1; return 0; diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index a368db2431a5..a0b225eb4ac4 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -624,7 +624,7 @@ int md_raid1_congested(struct mddev *mddev, int bits) return 1; rcu_read_lock(); - for (i = 0; i < conf->raid_disks; i++) { + for (i = 0; i < conf->raid_disks * 2; i++) { struct md_rdev *rdev = rcu_dereference(conf->mirrors[i].rdev); if (rdev && !test_bit(Faulty, &rdev->flags)) { struct request_queue *q = bdev_get_queue(rdev->bdev); diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index 6e8aa213f0d5..58c44d6453a0 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -67,6 +67,7 @@ static int max_queued_requests = 1024; static void allow_barrier(struct r10conf *conf); static void lower_barrier(struct r10conf *conf); +static int enough(struct r10conf *conf, int ignore); static void * r10bio_pool_alloc(gfp_t gfp_flags, void *data) { @@ -347,6 +348,19 @@ static void raid10_end_read_request(struct bio *bio, int error) * wait for the 'master' bio. */ set_bit(R10BIO_Uptodate, &r10_bio->state); + } else { + /* If all other devices that store this block have + * failed, we want to return the error upwards rather + * than fail the last device. Here we redefine + * "uptodate" to mean "Don't want to retry" + */ + unsigned long flags; + spin_lock_irqsave(&conf->device_lock, flags); + if (!enough(conf, rdev->raid_disk)) + uptodate = 1; + spin_unlock_irqrestore(&conf->device_lock, flags); + } + if (uptodate) { raid_end_bio_io(r10_bio); rdev_dec_pending(rdev, conf->mddev); } else { @@ -2052,6 +2066,7 @@ static void fix_read_error(struct r10conf *conf, struct mddev *mddev, struct r10 "md/raid10:%s: %s: Failing raid device\n", mdname(mddev), b); md_error(mddev, conf->mirrors[d].rdev); + r10_bio->devs[r10_bio->read_slot].bio = IO_BLOCKED; return; } @@ -2105,8 +2120,11 @@ static void fix_read_error(struct r10conf *conf, struct mddev *mddev, struct r10 rdev, r10_bio->devs[r10_bio->read_slot].addr + sect, - s, 0)) + s, 0)) { md_error(mddev, rdev); + r10_bio->devs[r10_bio->read_slot].bio + = IO_BLOCKED; + } break; } @@ -2299,17 +2317,20 @@ static void handle_read_error(struct mddev *mddev, struct r10bio *r10_bio) * This is all done synchronously while the array is * frozen. */ + bio = r10_bio->devs[slot].bio; + bdevname(bio->bi_bdev, b); + bio_put(bio); + r10_bio->devs[slot].bio = NULL; + if (mddev->ro == 0) { freeze_array(conf); fix_read_error(conf, mddev, r10_bio); unfreeze_array(conf); - } + } else + r10_bio->devs[slot].bio = IO_BLOCKED; + rdev_dec_pending(rdev, mddev); - bio = r10_bio->devs[slot].bio; - bdevname(bio->bi_bdev, b); - r10_bio->devs[slot].bio = - mddev->ro ? IO_BLOCKED : NULL; read_more: rdev = read_balance(conf, r10_bio, &max_sectors); if (rdev == NULL) { @@ -2318,13 +2339,10 @@ read_more: mdname(mddev), b, (unsigned long long)r10_bio->sector); raid_end_bio_io(r10_bio); - bio_put(bio); return; } do_sync = (r10_bio->master_bio->bi_rw & REQ_SYNC); - if (bio) - bio_put(bio); slot = r10_bio->read_slot; printk_ratelimited( KERN_ERR @@ -2360,7 +2378,6 @@ read_more: mbio->bi_phys_segments++; spin_unlock_irq(&conf->device_lock); generic_make_request(bio); - bio = NULL; r10_bio = mempool_alloc(conf->r10bio_pool, GFP_NOIO); @@ -3243,7 +3260,6 @@ static int run(struct mddev *mddev) disk->rdev = rdev; } - disk->rdev = rdev; disk_stack_limits(mddev->gendisk, rdev->bdev, rdev->data_offset << 9); /* as we don't honour merge_bvec_fn, we must never risk diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c index 53e2a80f42fa..d295941c9a3d 100644 --- a/drivers/mfd/ab8500-core.c +++ b/drivers/mfd/ab8500-core.c @@ -956,11 +956,12 @@ int __devinit ab8500_init(struct ab8500 *ab8500) return ret; out_freeirq: - if (ab8500->irq_base) { + if (ab8500->irq_base) free_irq(ab8500->irq, ab8500); out_removeirq: + if (ab8500->irq_base) ab8500_irq_remove(ab8500); - } + return ret; } diff --git a/drivers/mfd/mfd-core.c b/drivers/mfd/mfd-core.c index 0f5922812bff..411f523d4878 100644 --- a/drivers/mfd/mfd-core.c +++ b/drivers/mfd/mfd-core.c @@ -123,7 +123,7 @@ static int mfd_add_device(struct device *parent, int id, } if (!cell->ignore_resource_conflicts) { - ret = acpi_check_resource_conflict(res); + ret = acpi_check_resource_conflict(&res[r]); if (ret) goto fail_res; } diff --git a/drivers/mfd/s5m-core.c b/drivers/mfd/s5m-core.c index e075c113eec6..caadabeed8e9 100644 --- a/drivers/mfd/s5m-core.c +++ b/drivers/mfd/s5m-core.c @@ -105,7 +105,7 @@ static int s5m87xx_i2c_probe(struct i2c_client *i2c, s5m87xx->rtc = i2c_new_dummy(i2c->adapter, RTC_I2C_ADDR); i2c_set_clientdata(s5m87xx->rtc, s5m87xx); - if (pdata->cfg_pmic_irq) + if (pdata && pdata->cfg_pmic_irq) pdata->cfg_pmic_irq(); s5m_irq_init(s5m87xx); diff --git a/drivers/mfd/tps65910.c b/drivers/mfd/tps65910.c index 01cf5012a08f..4392f6bca156 100644 --- a/drivers/mfd/tps65910.c +++ b/drivers/mfd/tps65910.c @@ -168,7 +168,7 @@ static int tps65910_i2c_probe(struct i2c_client *i2c, goto err; init_data->irq = pmic_plat_data->irq; - init_data->irq_base = pmic_plat_data->irq; + init_data->irq_base = pmic_plat_data->irq_base; tps65910_gpio_init(tps65910, pmic_plat_data->gpio_base); diff --git a/drivers/mfd/tps65912-core.c b/drivers/mfd/tps65912-core.c index 5fec23a9ac03..74fd8cb5f372 100644 --- a/drivers/mfd/tps65912-core.c +++ b/drivers/mfd/tps65912-core.c @@ -151,7 +151,7 @@ int tps65912_device_init(struct tps65912 *tps65912) goto err; init_data->irq = pmic_plat_data->irq; - init_data->irq_base = pmic_plat_data->irq; + init_data->irq_base = pmic_plat_data->irq_base; ret = tps65912_irq_init(tps65912, init_data->irq, init_data); if (ret < 0) goto err; diff --git a/drivers/mfd/wm8350-irq.c b/drivers/mfd/wm8350-irq.c index 8a1fafd0bf7d..9fd01bf63c51 100644 --- a/drivers/mfd/wm8350-irq.c +++ b/drivers/mfd/wm8350-irq.c @@ -496,7 +496,6 @@ int wm8350_irq_init(struct wm8350 *wm8350, int irq, mutex_init(&wm8350->irq_lock); wm8350->chip_irq = irq; - wm8350->irq_base = pdata->irq_base; if (pdata && pdata->irq_base > 0) irq_base = pdata->irq_base; diff --git a/drivers/mfd/wm8994-core.c b/drivers/mfd/wm8994-core.c index f117e7fb9321..a04b3c108c8c 100644 --- a/drivers/mfd/wm8994-core.c +++ b/drivers/mfd/wm8994-core.c @@ -256,6 +256,20 @@ static int wm8994_suspend(struct device *dev) break; } + switch (wm8994->type) { + case WM1811: + ret = wm8994_reg_read(wm8994, WM8994_ANTIPOP_2); + if (ret < 0) { + dev_err(dev, "Failed to read jackdet: %d\n", ret); + } else if (ret & WM1811_JACKDET_MODE_MASK) { + dev_dbg(dev, "CODEC still active, ignoring suspend\n"); + return 0; + } + break; + default: + break; + } + /* Disable LDO pulldowns while the device is suspended if we * don't know that something will be driving them. */ if (!wm8994->ldo_ena_always_driven) diff --git a/drivers/mfd/wm8994-regmap.c b/drivers/mfd/wm8994-regmap.c index c598ae69b8ff..bc0c5096539a 100644 --- a/drivers/mfd/wm8994-regmap.c +++ b/drivers/mfd/wm8994-regmap.c @@ -806,6 +806,7 @@ static bool wm1811_readable_register(struct device *dev, unsigned int reg) case WM8994_DC_SERVO_2: case WM8994_DC_SERVO_READBACK: case WM8994_DC_SERVO_4: + case WM8994_DC_SERVO_4E: case WM8994_ANALOGUE_HP_1: case WM8958_MIC_DETECT_1: case WM8958_MIC_DETECT_2: diff --git a/drivers/misc/c2port/core.c b/drivers/misc/c2port/core.c index 19fc7c1cb428..f428d86bfc10 100644 --- a/drivers/misc/c2port/core.c +++ b/drivers/misc/c2port/core.c @@ -984,9 +984,9 @@ static int __init c2port_init(void) " - (C) 2007 Rodolfo Giometti\n"); c2port_class = class_create(THIS_MODULE, "c2port"); - if (!c2port_class) { + if (IS_ERR(c2port_class)) { printk(KERN_ERR "c2port: failed to allocate class\n"); - return -ENOMEM; + return PTR_ERR(c2port_class); } c2port_class->dev_attrs = c2port_attrs; diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 690255c7d4dc..132378b89d76 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -2068,6 +2068,9 @@ static int mmc_rescan_try_freq(struct mmc_host *host, unsigned freq) */ mmc_hw_reset_for_init(host); + /* Initialization should be done at 3.3 V I/O voltage. */ + mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, 0); + /* * sdio_reset sends CMD52 to reset card. Since we do not know * if the card is being re-initialized, just send it. CMD52 diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c index 30055f2b0d44..c3704e293a7b 100644 --- a/drivers/mmc/core/host.c +++ b/drivers/mmc/core/host.c @@ -238,10 +238,10 @@ static inline void mmc_host_clk_init(struct mmc_host *host) /* Hold MCI clock for 8 cycles by default */ host->clk_delay = 8; /* - * Default clock gating delay is 200ms. + * Default clock gating delay is 0ms to avoid wasting power. * This value can be tuned by writing into sysfs entry. */ - host->clkgate_delay = 200; + host->clkgate_delay = 0; host->clk_gated = false; INIT_DELAYED_WORK(&host->clk_gate_work, mmc_host_clk_gate_work); spin_lock_init(&host->clk_lock); diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index a48066344fa8..2b9ed1401dc4 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -816,6 +816,9 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, if (!mmc_host_is_spi(host)) mmc_set_bus_mode(host, MMC_BUSMODE_OPENDRAIN); + /* Initialization should be done at 3.3 V I/O voltage. */ + mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, 0); + /* * Since we're changing the OCR value, we seem to * need to tell some cards to go back to the idle diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c index 5017f9354ce2..c272c6868ecf 100644 --- a/drivers/mmc/core/sd.c +++ b/drivers/mmc/core/sd.c @@ -911,6 +911,9 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr, BUG_ON(!host); WARN_ON(!host->claimed); + /* The initialization should be done at 3.3 V I/O voltage. */ + mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, 0); + err = mmc_sd_get_cid(host, ocr, cid, &rocr); if (err) return err; @@ -1156,11 +1159,6 @@ int mmc_attach_sd(struct mmc_host *host) BUG_ON(!host); WARN_ON(!host->claimed); - /* Make sure we are at 3.3V signalling voltage */ - err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, false); - if (err) - return err; - /* Disable preset value enable if already set since last time */ if (host->ops->enable_preset_value) { mmc_host_clk_hold(host); diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c index 12cde6ee17f5..2c7c83f832d2 100644 --- a/drivers/mmc/core/sdio.c +++ b/drivers/mmc/core/sdio.c @@ -585,6 +585,9 @@ static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr, * Inform the card of the voltage */ if (!powered_resume) { + /* The initialization should be done at 3.3 V I/O voltage. */ + mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, 0); + err = mmc_send_io_op_cond(host, host->ocr, &ocr); if (err) goto err; @@ -996,6 +999,11 @@ static int mmc_sdio_power_restore(struct mmc_host *host) * With these steps taken, mmc_select_voltage() is also required to * restore the correct voltage setting of the card. */ + + /* The initialization should be done at 3.3 V I/O voltage. */ + if (!mmc_card_keep_power(host)) + mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, 0); + sdio_reset(host); mmc_go_idle(host); mmc_send_if_cond(host, host->ocr_avail); diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index 6985cdb0bb26..e4449a54ae8f 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -1948,12 +1948,12 @@ static bool atmci_filter(struct dma_chan *chan, void *slave) } } -static void atmci_configure_dma(struct atmel_mci *host) +static bool atmci_configure_dma(struct atmel_mci *host) { struct mci_platform_data *pdata; if (host == NULL) - return; + return false; pdata = host->pdev->dev.platform_data; @@ -1970,12 +1970,15 @@ static void atmci_configure_dma(struct atmel_mci *host) host->dma.chan = dma_request_channel(mask, atmci_filter, pdata->dma_slave); } - if (!host->dma.chan) - dev_notice(&host->pdev->dev, "DMA not available, using PIO\n"); - else + if (!host->dma.chan) { + dev_warn(&host->pdev->dev, "no DMA channel available\n"); + return false; + } else { dev_info(&host->pdev->dev, "Using %s for DMA transfers\n", dma_chan_name(host->dma.chan)); + return true; + } } static inline unsigned int atmci_get_version(struct atmel_mci *host) @@ -2085,8 +2088,7 @@ static int __init atmci_probe(struct platform_device *pdev) /* Get MCI capabilities and set operations according to it */ atmci_get_cap(host); - if (host->caps.has_dma) { - dev_info(&pdev->dev, "using DMA\n"); + if (host->caps.has_dma && atmci_configure_dma(host)) { host->prepare_data = &atmci_prepare_data_dma; host->submit_data = &atmci_submit_data_dma; host->stop_transfer = &atmci_stop_transfer_dma; @@ -2096,15 +2098,12 @@ static int __init atmci_probe(struct platform_device *pdev) host->submit_data = &atmci_submit_data_pdc; host->stop_transfer = &atmci_stop_transfer_pdc; } else { - dev_info(&pdev->dev, "no DMA, no PDC\n"); + dev_info(&pdev->dev, "using PIO\n"); host->prepare_data = &atmci_prepare_data; host->submit_data = &atmci_submit_data; host->stop_transfer = &atmci_stop_transfer; } - if (host->caps.has_dma) - atmci_configure_dma(host); - platform_set_drvdata(pdev, host); /* We need at least one slot to succeed */ diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 0d955ffaf44e..11e589cd8233 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -1271,12 +1271,13 @@ static int __devinit mmci_probe(struct amba_device *dev, /* * Block size can be up to 2048 bytes, but must be a power of two. */ - mmc->max_blk_size = 2048; + mmc->max_blk_size = 1 << 11; /* - * No limit on the number of blocks transferred. + * Limit the number of blocks transferred so that we don't overflow + * the maximum request size. */ - mmc->max_blk_count = mmc->max_req_size; + mmc->max_blk_count = mmc->max_req_size >> 11; spin_lock_init(&host->lock); diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index d601e41af282..0be4e2013632 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -269,8 +269,9 @@ static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg) imx_data->scratchpad = val; return; case SDHCI_COMMAND: - if ((host->cmd->opcode == MMC_STOP_TRANSMISSION) - && (imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT)) + if ((host->cmd->opcode == MMC_STOP_TRANSMISSION || + host->cmd->opcode == MMC_SET_BLOCK_COUNT) && + (imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT)) val |= SDHCI_CMD_ABORTCMD; if (is_imx6q_usdhc(imx_data)) { diff --git a/drivers/net/caif/caif_hsi.c b/drivers/net/caif/caif_hsi.c index 0a4fc62a381d..c998e1afebc6 100644 --- a/drivers/net/caif/caif_hsi.c +++ b/drivers/net/caif/caif_hsi.c @@ -978,7 +978,7 @@ static void cfhsi_setup(struct net_device *dev) dev->netdev_ops = &cfhsi_ops; dev->type = ARPHRD_CAIF; dev->flags = IFF_POINTOPOINT | IFF_NOARP; - dev->mtu = CFHSI_MAX_PAYLOAD_SZ; + dev->mtu = CFHSI_MAX_CAIF_FRAME_SZ; dev->tx_queue_len = 0; dev->destructor = free_netdev; skb_queue_head_init(&cfhsi->qhead); diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index a1f2e0fed78b..35c2a202d67a 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -5352,7 +5352,7 @@ static void tg3_tx(struct tg3_napi *tnapi) } } - netdev_completed_queue(tp->dev, pkts_compl, bytes_compl); + netdev_tx_completed_queue(txq, pkts_compl, bytes_compl); tnapi->tx_cons = sw_idx; @@ -6793,7 +6793,7 @@ static netdev_tx_t tg3_start_xmit(struct sk_buff *skb, struct net_device *dev) } skb_tx_timestamp(skb); - netdev_sent_queue(tp->dev, skb->len); + netdev_tx_sent_queue(txq, skb->len); /* Packets are ready, update Tx producer idx local and on card. */ tw32_tx_mbox(tnapi->prodmbox, entry); @@ -7275,8 +7275,8 @@ static void tg3_free_rings(struct tg3 *tp) dev_kfree_skb_any(skb); } + netdev_tx_reset_queue(netdev_get_tx_queue(tp->dev, j)); } - netdev_reset_queue(tp->dev); } /* Initialize tx/rx rings for packet processing. @@ -7886,10 +7886,8 @@ static int tg3_chip_reset(struct tg3 *tp) return 0; } -static struct rtnl_link_stats64 *tg3_get_stats64(struct net_device *, - struct rtnl_link_stats64 *); -static struct tg3_ethtool_stats *tg3_get_estats(struct tg3 *, - struct tg3_ethtool_stats *); +static void tg3_get_nstats(struct tg3 *, struct rtnl_link_stats64 *); +static void tg3_get_estats(struct tg3 *, struct tg3_ethtool_stats *); /* tp->lock is held. */ static int tg3_halt(struct tg3 *tp, int kind, int silent) @@ -7910,7 +7908,7 @@ static int tg3_halt(struct tg3 *tp, int kind, int silent) if (tp->hw_stats) { /* Save the stats across chip resets... */ - tg3_get_stats64(tp->dev, &tp->net_stats_prev), + tg3_get_nstats(tp, &tp->net_stats_prev), tg3_get_estats(tp, &tp->estats_prev); /* And make sure the next sample is new data */ @@ -9847,7 +9845,7 @@ static inline u64 get_stat64(tg3_stat64_t *val) return ((u64)val->high << 32) | ((u64)val->low); } -static u64 calc_crc_errors(struct tg3 *tp) +static u64 tg3_calc_crc_errors(struct tg3 *tp) { struct tg3_hw_stats *hw_stats = tp->hw_stats; @@ -9856,14 +9854,12 @@ static u64 calc_crc_errors(struct tg3 *tp) GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701)) { u32 val; - spin_lock_bh(&tp->lock); if (!tg3_readphy(tp, MII_TG3_TEST1, &val)) { tg3_writephy(tp, MII_TG3_TEST1, val | MII_TG3_TEST1_CRC_EN); tg3_readphy(tp, MII_TG3_RXR_COUNTERS, &val); } else val = 0; - spin_unlock_bh(&tp->lock); tp->phy_crc_errors += val; @@ -9877,14 +9873,13 @@ static u64 calc_crc_errors(struct tg3 *tp) estats->member = old_estats->member + \ get_stat64(&hw_stats->member) -static struct tg3_ethtool_stats *tg3_get_estats(struct tg3 *tp, - struct tg3_ethtool_stats *estats) +static void tg3_get_estats(struct tg3 *tp, struct tg3_ethtool_stats *estats) { struct tg3_ethtool_stats *old_estats = &tp->estats_prev; struct tg3_hw_stats *hw_stats = tp->hw_stats; if (!hw_stats) - return old_estats; + return; ESTAT_ADD(rx_octets); ESTAT_ADD(rx_fragments); @@ -9963,20 +9958,13 @@ static struct tg3_ethtool_stats *tg3_get_estats(struct tg3 *tp, ESTAT_ADD(nic_tx_threshold_hit); ESTAT_ADD(mbuf_lwm_thresh_hit); - - return estats; } -static struct rtnl_link_stats64 *tg3_get_stats64(struct net_device *dev, - struct rtnl_link_stats64 *stats) +static void tg3_get_nstats(struct tg3 *tp, struct rtnl_link_stats64 *stats) { - struct tg3 *tp = netdev_priv(dev); struct rtnl_link_stats64 *old_stats = &tp->net_stats_prev; struct tg3_hw_stats *hw_stats = tp->hw_stats; - if (!hw_stats) - return old_stats; - stats->rx_packets = old_stats->rx_packets + get_stat64(&hw_stats->rx_ucast_packets) + get_stat64(&hw_stats->rx_mcast_packets) + @@ -10019,15 +10007,13 @@ static struct rtnl_link_stats64 *tg3_get_stats64(struct net_device *dev, get_stat64(&hw_stats->tx_carrier_sense_errors); stats->rx_crc_errors = old_stats->rx_crc_errors + - calc_crc_errors(tp); + tg3_calc_crc_errors(tp); stats->rx_missed_errors = old_stats->rx_missed_errors + get_stat64(&hw_stats->rx_discards); stats->rx_dropped = tp->rx_dropped; stats->tx_dropped = tp->tx_dropped; - - return stats; } static inline u32 calc_crc(unsigned char *buf, int len) @@ -15409,6 +15395,21 @@ static void __devinit tg3_init_coal(struct tg3 *tp) } } +static struct rtnl_link_stats64 *tg3_get_stats64(struct net_device *dev, + struct rtnl_link_stats64 *stats) +{ + struct tg3 *tp = netdev_priv(dev); + + if (!tp->hw_stats) + return &tp->net_stats_prev; + + spin_lock_bh(&tp->lock); + tg3_get_nstats(tp, stats); + spin_unlock_bh(&tp->lock); + + return stats; +} + static const struct net_device_ops tg3_netdev_ops = { .ndo_open = tg3_open, .ndo_stop = tg3_close, diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c index e83d12c7bf20..9d76e59d9526 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c @@ -196,6 +196,8 @@ static DEFINE_PCI_DEVICE_TABLE(cxgb4_pci_tbl) = { CH_DEVICE(0x4408, 4), CH_DEVICE(0x4409, 4), CH_DEVICE(0x440a, 4), + CH_DEVICE(0x440d, 4), + CH_DEVICE(0x440e, 4), { 0, } }; diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c b/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c index e53365a71484..d963c1d57f71 100644 --- a/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c +++ b/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c @@ -2892,6 +2892,8 @@ static struct pci_device_id cxgb4vf_pci_tbl[] = { CH_DEVICE(0x4808, 0), /* T420-cx */ CH_DEVICE(0x4809, 0), /* T420-bt */ CH_DEVICE(0x480a, 0), /* T404-bt */ + CH_DEVICE(0x480d, 0), /* T480-cr */ + CH_DEVICE(0x480e, 0), /* T440-lp-cr */ { 0, } }; diff --git a/drivers/net/ethernet/cisco/enic/enic.h b/drivers/net/ethernet/cisco/enic/enic.h index ee93a2087fe6..c52295cd05ef 100644 --- a/drivers/net/ethernet/cisco/enic/enic.h +++ b/drivers/net/ethernet/cisco/enic/enic.h @@ -94,7 +94,7 @@ struct enic { u32 rx_coalesce_usecs; u32 tx_coalesce_usecs; #ifdef CONFIG_PCI_IOV - u32 num_vfs; + u16 num_vfs; #endif struct enic_port_profile *pp; diff --git a/drivers/net/ethernet/cisco/enic/enic_main.c b/drivers/net/ethernet/cisco/enic/enic_main.c index ab3f67f980d8..0e4edd3b6bee 100644 --- a/drivers/net/ethernet/cisco/enic/enic_main.c +++ b/drivers/net/ethernet/cisco/enic/enic_main.c @@ -2370,7 +2370,7 @@ static int __devinit enic_probe(struct pci_dev *pdev, pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_SRIOV); if (pos) { pci_read_config_word(pdev, pos + PCI_SRIOV_TOTAL_VF, - (u16 *)&enic->num_vfs); + &enic->num_vfs); if (enic->num_vfs) { err = pci_enable_sriov(pdev, enic->num_vfs); if (err) { diff --git a/drivers/net/ethernet/mellanox/mlx4/qp.c b/drivers/net/ethernet/mellanox/mlx4/qp.c index 738f950a1ce5..fb2b36759cbf 100644 --- a/drivers/net/ethernet/mellanox/mlx4/qp.c +++ b/drivers/net/ethernet/mellanox/mlx4/qp.c @@ -151,11 +151,6 @@ static int __mlx4_qp_modify(struct mlx4_dev *dev, struct mlx4_mtt *mtt, context->log_page_size = mtt->page_shift - MLX4_ICM_PAGE_SHIFT; } - port = ((context->pri_path.sched_queue >> 6) & 1) + 1; - if (dev->caps.port_type[port] == MLX4_PORT_TYPE_ETH) - context->pri_path.sched_queue = (context->pri_path.sched_queue & - 0xc3); - *(__be32 *) mailbox->buf = cpu_to_be32(optpar); memcpy(mailbox->buf + 8, context, sizeof *context); diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_param.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_param.c index 9cb5f912e489..29e23bec809c 100644 --- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_param.c +++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_param.c @@ -321,10 +321,10 @@ static void pch_gbe_check_copper_options(struct pch_gbe_adapter *adapter) pr_debug("AutoNeg specified along with Speed or Duplex, AutoNeg parameter ignored\n"); hw->phy.autoneg_advertised = opt.def; } else { - hw->phy.autoneg_advertised = AutoNeg; - pch_gbe_validate_option( - (int *)(&hw->phy.autoneg_advertised), - &opt, adapter); + int tmp = AutoNeg; + + pch_gbe_validate_option(&tmp, &opt, adapter); + hw->phy.autoneg_advertised = tmp; } } @@ -495,9 +495,10 @@ void pch_gbe_check_options(struct pch_gbe_adapter *adapter) .arg = { .l = { .nr = (int)ARRAY_SIZE(fc_list), .p = fc_list } } }; - hw->mac.fc = FlowControl; - pch_gbe_validate_option((int *)(&hw->mac.fc), - &opt, adapter); + int tmp = FlowControl; + + pch_gbe_validate_option(&tmp, &opt, adapter); + hw->mac.fc = tmp; } pch_gbe_check_copper_options(adapter); diff --git a/drivers/net/ethernet/packetengines/Kconfig b/drivers/net/ethernet/packetengines/Kconfig index b97132d9dff0..8f29feb35548 100644 --- a/drivers/net/ethernet/packetengines/Kconfig +++ b/drivers/net/ethernet/packetengines/Kconfig @@ -4,6 +4,7 @@ config NET_PACKET_ENGINE bool "Packet Engine devices" + default y depends on PCI ---help--- If you have a network (Ethernet) card belonging to this class, say Y diff --git a/drivers/net/ethernet/qlogic/qla3xxx.c b/drivers/net/ethernet/qlogic/qla3xxx.c index 7931531c3a40..e61560e16385 100644 --- a/drivers/net/ethernet/qlogic/qla3xxx.c +++ b/drivers/net/ethernet/qlogic/qla3xxx.c @@ -3017,7 +3017,6 @@ static int ql_adapter_initialize(struct ql3_adapter *qdev) (void __iomem *)port_regs; u32 delay = 10; int status = 0; - unsigned long hw_flags = 0; if (ql_mii_setup(qdev)) return -1; @@ -3228,9 +3227,9 @@ static int ql_adapter_initialize(struct ql3_adapter *qdev) value = ql_read_page0_reg(qdev, &port_regs->portStatus); if (value & PORT_STATUS_IC) break; - spin_unlock_irqrestore(&qdev->hw_lock, hw_flags); + spin_unlock_irq(&qdev->hw_lock); msleep(500); - spin_lock_irqsave(&qdev->hw_lock, hw_flags); + spin_lock_irq(&qdev->hw_lock); } while (--delay); if (delay == 0) { diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index 7a0c800b50ad..bbacb3741ec0 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -3781,12 +3781,20 @@ static void rtl8169_init_ring_indexes(struct rtl8169_private *tp) static void rtl_hw_jumbo_enable(struct rtl8169_private *tp) { + void __iomem *ioaddr = tp->mmio_addr; + + RTL_W8(Cfg9346, Cfg9346_Unlock); rtl_generic_op(tp, tp->jumbo_ops.enable); + RTL_W8(Cfg9346, Cfg9346_Lock); } static void rtl_hw_jumbo_disable(struct rtl8169_private *tp) { + void __iomem *ioaddr = tp->mmio_addr; + + RTL_W8(Cfg9346, Cfg9346_Unlock); rtl_generic_op(tp, tp->jumbo_ops.disable); + RTL_W8(Cfg9346, Cfg9346_Lock); } static void r8168c_hw_jumbo_enable(struct rtl8169_private *tp) @@ -6186,6 +6194,9 @@ static void rtl_shutdown(struct pci_dev *pdev) { struct net_device *dev = pci_get_drvdata(pdev); struct rtl8169_private *tp = netdev_priv(dev); + struct device *d = &pdev->dev; + + pm_runtime_get_sync(d); rtl8169_net_suspend(dev); @@ -6207,6 +6218,8 @@ static void rtl_shutdown(struct pci_dev *pdev) pci_wake_from_d3(pdev, true); pci_set_power_state(pdev, PCI_D3hot); } + + pm_runtime_put_noidle(d); } static struct pci_driver rtl8169_pci_driver = { diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c index 3dcd3857a36c..756c0f5565a5 100644 --- a/drivers/net/vmxnet3/vmxnet3_drv.c +++ b/drivers/net/vmxnet3/vmxnet3_drv.c @@ -830,13 +830,8 @@ vmxnet3_parse_and_copy_hdr(struct sk_buff *skb, struct vmxnet3_tx_queue *tq, ctx->l4_hdr_size = ((struct tcphdr *) skb_transport_header(skb))->doff * 4; else if (iph->protocol == IPPROTO_UDP) - /* - * Use tcp header size so that bytes to - * be copied are more than required by - * the device. - */ ctx->l4_hdr_size = - sizeof(struct tcphdr); + sizeof(struct udphdr); else ctx->l4_hdr_size = 0; } else { diff --git a/drivers/net/vmxnet3/vmxnet3_int.h b/drivers/net/vmxnet3/vmxnet3_int.h index ed54797db191..fc46a81ad538 100644 --- a/drivers/net/vmxnet3/vmxnet3_int.h +++ b/drivers/net/vmxnet3/vmxnet3_int.h @@ -70,10 +70,10 @@ /* * Version numbers */ -#define VMXNET3_DRIVER_VERSION_STRING "1.1.18.0-k" +#define VMXNET3_DRIVER_VERSION_STRING "1.1.29.0-k" /* a 32-bit int, each byte encode a verion number in VMXNET3_DRIVER_VERSION */ -#define VMXNET3_DRIVER_VERSION_NUM 0x01011200 +#define VMXNET3_DRIVER_VERSION_NUM 0x01011D00 #if defined(CONFIG_PCI_MSI) /* RSS only makes sense if MSI-X is supported. */ diff --git a/drivers/net/wireless/ath/ath9k/ar5008_phy.c b/drivers/net/wireless/ath/ath9k/ar5008_phy.c index f901a17f76ba..86a891f93fc9 100644 --- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c @@ -489,8 +489,6 @@ static int ar5008_hw_rf_alloc_ext_banks(struct ath_hw *ah) ATH_ALLOC_BANK(ah->analogBank6Data, ah->iniBank6.ia_rows); ATH_ALLOC_BANK(ah->analogBank6TPCData, ah->iniBank6TPC.ia_rows); ATH_ALLOC_BANK(ah->analogBank7Data, ah->iniBank7.ia_rows); - ATH_ALLOC_BANK(ah->addac5416_21, - ah->iniAddac.ia_rows * ah->iniAddac.ia_columns); ATH_ALLOC_BANK(ah->bank6Temp, ah->iniBank6.ia_rows); return 0; @@ -519,7 +517,6 @@ static void ar5008_hw_rf_free_ext_banks(struct ath_hw *ah) ATH_FREE_BANK(ah->analogBank6Data); ATH_FREE_BANK(ah->analogBank6TPCData); ATH_FREE_BANK(ah->analogBank7Data); - ATH_FREE_BANK(ah->addac5416_21); ATH_FREE_BANK(ah->bank6Temp); #undef ATH_FREE_BANK @@ -805,27 +802,7 @@ static int ar5008_hw_process_ini(struct ath_hw *ah, if (ah->eep_ops->set_addac) ah->eep_ops->set_addac(ah, chan); - if (AR_SREV_5416_22_OR_LATER(ah)) { - REG_WRITE_ARRAY(&ah->iniAddac, 1, regWrites); - } else { - struct ar5416IniArray temp; - u32 addacSize = - sizeof(u32) * ah->iniAddac.ia_rows * - ah->iniAddac.ia_columns; - - /* For AR5416 2.0/2.1 */ - memcpy(ah->addac5416_21, - ah->iniAddac.ia_array, addacSize); - - /* override CLKDRV value at [row, column] = [31, 1] */ - (ah->addac5416_21)[31 * ah->iniAddac.ia_columns + 1] = 0; - - temp.ia_array = ah->addac5416_21; - temp.ia_columns = ah->iniAddac.ia_columns; - temp.ia_rows = ah->iniAddac.ia_rows; - REG_WRITE_ARRAY(&temp, 1, regWrites); - } - + REG_WRITE_ARRAY(&ah->iniAddac, 1, regWrites); REG_WRITE(ah, AR_PHY_ADC_SERIAL_CTL, AR_PHY_SEL_INTERNAL_ADDAC); ENABLE_REGWRITE_BUFFER(ah); diff --git a/drivers/net/wireless/ath/ath9k/ar9002_hw.c b/drivers/net/wireless/ath/ath9k/ar9002_hw.c index 11f192a1ceb7..d190411ac8f5 100644 --- a/drivers/net/wireless/ath/ath9k/ar9002_hw.c +++ b/drivers/net/wireless/ath/ath9k/ar9002_hw.c @@ -180,6 +180,25 @@ static void ar9002_hw_init_mode_regs(struct ath_hw *ah) INIT_INI_ARRAY(&ah->iniAddac, ar5416Addac, ARRAY_SIZE(ar5416Addac), 2); } + + /* iniAddac needs to be modified for these chips */ + if (AR_SREV_9160(ah) || !AR_SREV_5416_22_OR_LATER(ah)) { + struct ar5416IniArray *addac = &ah->iniAddac; + u32 size = sizeof(u32) * addac->ia_rows * addac->ia_columns; + u32 *data; + + data = kmalloc(size, GFP_KERNEL); + if (!data) + return; + + memcpy(data, addac->ia_array, size); + addac->ia_array = data; + + if (!AR_SREV_5416_22_OR_LATER(ah)) { + /* override CLKDRV value */ + INI_RA(addac, 31,1) = 0; + } + } } /* Support for Japan ch.14 (2484) spread */ diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index 6a29004a71b0..c8261d4fc780 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -940,7 +940,6 @@ struct ath_hw { u32 *analogBank6Data; u32 *analogBank6TPCData; u32 *analogBank7Data; - u32 *addac5416_21; u32 *bank6Temp; u8 txpower_limit; diff --git a/drivers/net/wireless/brcm80211/brcmsmac/ampdu.c b/drivers/net/wireless/brcm80211/brcmsmac/ampdu.c index 90911eec0cf5..30b58870b1b6 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/ampdu.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/ampdu.c @@ -1051,17 +1051,13 @@ brcms_c_ampdu_dotxstatus_complete(struct ampdu_info *ampdu, struct scb *scb, } /* either retransmit or send bar if ack not recd */ if (!ack_recd) { - struct ieee80211_tx_rate *txrate = - tx_info->status.rates; - if (retry && (txrate[0].count < (int)retry_limit)) { + if (retry && (ini->txretry[index] < (int)retry_limit)) { ini->txretry[index]++; ini->tx_in_transit--; /* * Use high prededence for retransmit to * give some punch */ - /* brcms_c_txq_enq(wlc, scb, p, - * BRCMS_PRIO_TO_PREC(tid)); */ brcms_c_txq_enq(wlc, scb, p, BRCMS_PRIO_TO_HI_PREC(tid)); } else { @@ -1074,9 +1070,9 @@ brcms_c_ampdu_dotxstatus_complete(struct ampdu_info *ampdu, struct scb *scb, IEEE80211_TX_STAT_AMPDU_NO_BACK; skb_pull(p, D11_PHY_HDR_LEN); skb_pull(p, D11_TXH_LEN); - wiphy_err(wiphy, "%s: BA Timeout, seq %d, in_" - "transit %d\n", "AMPDU status", seq, - ini->tx_in_transit); + BCMMSG(wiphy, + "BA Timeout, seq %d, in_transit %d\n", + seq, ini->tx_in_transit); ieee80211_tx_status_irqsafe(wlc->pub->ieee_hw, p); } diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-sta.c b/drivers/net/wireless/iwlwifi/iwl-agn-sta.c index 7353826095f1..e483cfa8d14e 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-sta.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-sta.c @@ -1187,6 +1187,7 @@ int iwl_remove_dynamic_key(struct iwl_priv *priv, unsigned long flags; struct iwl_addsta_cmd sta_cmd; u8 sta_id = iwlagn_key_sta_id(priv, ctx->vif, sta); + __le16 key_flags; /* if station isn't there, neither is the key */ if (sta_id == IWL_INVALID_STATION) @@ -1212,7 +1213,14 @@ int iwl_remove_dynamic_key(struct iwl_priv *priv, IWL_ERR(priv, "offset %d not used in uCode key table.\n", keyconf->hw_key_idx); - sta_cmd.key.key_flags = STA_KEY_FLG_NO_ENC | STA_KEY_FLG_INVALID; + key_flags = cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS); + key_flags |= STA_KEY_FLG_MAP_KEY_MSK | STA_KEY_FLG_NO_ENC | + STA_KEY_FLG_INVALID; + + if (!(keyconf->flags & IEEE80211_KEY_FLAG_PAIRWISE)) + key_flags |= STA_KEY_MULTICAST_MSK; + + sta_cmd.key.key_flags = key_flags; sta_cmd.key.key_offset = WEP_INVALID_OFFSET; sta_cmd.sta.modify_mask = STA_MODIFY_KEY_MASK; sta_cmd.mode = STA_CONTROL_MODIFY_MSK; diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index c3e1aa7c1a80..d2a1ea98d0f2 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -1220,7 +1220,8 @@ void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev) cancel_work_sync(&rt2x00dev->rxdone_work); cancel_work_sync(&rt2x00dev->txdone_work); } - destroy_workqueue(rt2x00dev->workqueue); + if (rt2x00dev->workqueue) + destroy_workqueue(rt2x00dev->workqueue); /* * Free the tx status fifo. diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c index ea2bd1be2640..91a375fb6ae6 100644 --- a/drivers/of/fdt.c +++ b/drivers/of/fdt.c @@ -23,7 +23,6 @@ #include <asm/machdep.h> #endif /* CONFIG_PPC */ -#include <asm/setup.h> #include <asm/page.h> char *of_fdt_get_string(struct boot_param_header *blob, u32 offset) diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c index 980c079e4443..483c0adcad87 100644 --- a/drivers/of/of_mdio.c +++ b/drivers/of/of_mdio.c @@ -182,7 +182,7 @@ struct phy_device *of_phy_connect_fixed_link(struct net_device *dev, if (!phy_id || sz < sizeof(*phy_id)) return NULL; - sprintf(bus_id, PHY_ID_FMT, "0", be32_to_cpu(phy_id[0])); + sprintf(bus_id, PHY_ID_FMT, "fixed-0", be32_to_cpu(phy_id[0])); phy = phy_connect(dev, bus_id, hndlr, 0, iface); return IS_ERR(phy) ? NULL : phy; diff --git a/drivers/pps/pps.c b/drivers/pps/pps.c index 2baadd21b7a6..98fbe62694d4 100644 --- a/drivers/pps/pps.c +++ b/drivers/pps/pps.c @@ -369,9 +369,9 @@ static int __init pps_init(void) int err; pps_class = class_create(THIS_MODULE, "pps"); - if (!pps_class) { + if (IS_ERR(pps_class)) { pr_err("failed to allocate class\n"); - return -ENOMEM; + return PTR_ERR(pps_class); } pps_class->dev_attrs = pps_attrs; diff --git a/drivers/rapidio/devices/tsi721.c b/drivers/rapidio/devices/tsi721.c index 691b1ab1a3d0..30d2072f480b 100644 --- a/drivers/rapidio/devices/tsi721.c +++ b/drivers/rapidio/devices/tsi721.c @@ -410,13 +410,14 @@ static void tsi721_db_dpc(struct work_struct *work) */ mport = priv->mport; - wr_ptr = ioread32(priv->regs + TSI721_IDQ_WP(IDB_QUEUE)); - rd_ptr = ioread32(priv->regs + TSI721_IDQ_RP(IDB_QUEUE)); + wr_ptr = ioread32(priv->regs + TSI721_IDQ_WP(IDB_QUEUE)) % IDB_QSIZE; + rd_ptr = ioread32(priv->regs + TSI721_IDQ_RP(IDB_QUEUE)) % IDB_QSIZE; while (wr_ptr != rd_ptr) { idb_entry = (u64 *)(priv->idb_base + (TSI721_IDB_ENTRY_SIZE * rd_ptr)); rd_ptr++; + rd_ptr %= IDB_QSIZE; idb.msg = *idb_entry; *idb_entry = 0; diff --git a/drivers/rtc/rtc-r9701.c b/drivers/rtc/rtc-r9701.c index 9beba49c3c5b..2853c2a6f10f 100644 --- a/drivers/rtc/rtc-r9701.c +++ b/drivers/rtc/rtc-r9701.c @@ -125,6 +125,13 @@ static int __devinit r9701_probe(struct spi_device *spi) unsigned char tmp; int res; + tmp = R100CNT; + res = read_regs(&spi->dev, &tmp, 1); + if (res || tmp != 0x20) { + dev_err(&spi->dev, "cannot read RTC register\n"); + return -ENODEV; + } + rtc = rtc_device_register("r9701", &spi->dev, &r9701_rtc_ops, THIS_MODULE); if (IS_ERR(rtc)) @@ -132,13 +139,6 @@ static int __devinit r9701_probe(struct spi_device *spi) dev_set_drvdata(&spi->dev, rtc); - tmp = R100CNT; - res = read_regs(&spi->dev, &tmp, 1); - if (res || tmp != 0x20) { - rtc_device_unregister(rtc); - return res; - } - return 0; } diff --git a/drivers/s390/cio/qdio_main.c b/drivers/s390/cio/qdio_main.c index 3ef8d071c64a..770a740a393c 100644 --- a/drivers/s390/cio/qdio_main.c +++ b/drivers/s390/cio/qdio_main.c @@ -167,7 +167,7 @@ again: DBF_ERROR("%4x EQBS ERROR", SCH_NO(q)); DBF_ERROR("%3d%3d%2d", count, tmp_count, nr); q->handler(q->irq_ptr->cdev, QDIO_ERROR_ACTIVATE_CHECK_CONDITION, - 0, -1, -1, q->irq_ptr->int_parm); + q->nr, q->first_to_kick, count, q->irq_ptr->int_parm); return 0; } @@ -215,7 +215,7 @@ again: DBF_ERROR("%4x SQBS ERROR", SCH_NO(q)); DBF_ERROR("%3d%3d%2d", count, tmp_count, nr); q->handler(q->irq_ptr->cdev, QDIO_ERROR_ACTIVATE_CHECK_CONDITION, - 0, -1, -1, q->irq_ptr->int_parm); + q->nr, q->first_to_kick, count, q->irq_ptr->int_parm); return 0; } diff --git a/drivers/scsi/sd_dif.c b/drivers/scsi/sd_dif.c index 0cb39ff21171..f8fb2d691c0a 100644 --- a/drivers/scsi/sd_dif.c +++ b/drivers/scsi/sd_dif.c @@ -408,7 +408,7 @@ int sd_dif_prepare(struct request *rq, sector_t hw_sector, unsigned int sector_s kunmap_atomic(sdt, KM_USER0); } - bio->bi_flags |= BIO_MAPPED_INTEGRITY; + bio->bi_flags |= (1 << BIO_MAPPED_INTEGRITY); } return 0; diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c index 2f9cb43a2398..f37ad2271ad5 100644 --- a/drivers/spi/spi-pl022.c +++ b/drivers/spi/spi-pl022.c @@ -1083,7 +1083,7 @@ err_alloc_rx_sg: return -ENOMEM; } -static int __init pl022_dma_probe(struct pl022 *pl022) +static int __devinit pl022_dma_probe(struct pl022 *pl022) { dma_cap_mask_t mask; diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig index b3d17416d86a..830cd62d8492 100644 --- a/drivers/tty/Kconfig +++ b/drivers/tty/Kconfig @@ -365,7 +365,7 @@ config PPC_EPAPR_HV_BYTECHAN config PPC_EARLY_DEBUG_EHV_BC bool "Early console (udbg) support for ePAPR hypervisors" - depends on PPC_EPAPR_HV_BYTECHAN + depends on PPC_EPAPR_HV_BYTECHAN=y help Select this option to enable early console (a.k.a. "udbg") support via an ePAPR byte channel. You also need to choose the byte channel diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index c26a82e83f6e..b556a72264d1 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -239,7 +239,7 @@ static void ehci_fsl_setup_phy(struct ehci_hcd *ehci, ehci_writel(ehci, portsc, &ehci->regs->port_status[port_offset]); } -static int ehci_fsl_usb_setup(struct ehci_hcd *ehci) +static void ehci_fsl_usb_setup(struct ehci_hcd *ehci) { struct usb_hcd *hcd = ehci_to_hcd(ehci); struct fsl_usb2_platform_data *pdata; @@ -299,19 +299,12 @@ static int ehci_fsl_usb_setup(struct ehci_hcd *ehci) #endif out_be32(non_ehci + FSL_SOC_USB_SICTRL, 0x00000001); } - - if (!(in_be32(non_ehci + FSL_SOC_USB_CTRL) & CTRL_PHY_CLK_VALID)) { - printk(KERN_WARNING "fsl-ehci: USB PHY clock invalid\n"); - return -ENODEV; - } - return 0; } /* called after powerup, by probe or system-pm "wakeup" */ static int ehci_fsl_reinit(struct ehci_hcd *ehci) { - if (ehci_fsl_usb_setup(ehci)) - return -ENODEV; + ehci_fsl_usb_setup(ehci); ehci_port_power(ehci, 0); return 0; diff --git a/drivers/usb/host/ehci-fsl.h b/drivers/usb/host/ehci-fsl.h index bdf43e2adc51..491806221165 100644 --- a/drivers/usb/host/ehci-fsl.h +++ b/drivers/usb/host/ehci-fsl.h @@ -45,6 +45,5 @@ #define FSL_SOC_USB_PRICTRL 0x40c /* NOTE: big-endian */ #define FSL_SOC_USB_SICTRL 0x410 /* NOTE: big-endian */ #define FSL_SOC_USB_CTRL 0x500 /* NOTE: big-endian */ -#define CTRL_PHY_CLK_VALID (1 << 17) #define SNOOP_SIZE_2GB 0x1e #endif /* _EHCI_FSL_H */ |