diff options
Diffstat (limited to 'include/linux/mfd')
-rw-r--r-- | include/linux/mfd/abx500.h | 2 | ||||
-rw-r--r-- | include/linux/mfd/abx500/ab8500-bm.h | 4 | ||||
-rw-r--r-- | include/linux/mfd/axp20x.h | 20 | ||||
-rw-r--r-- | include/linux/mfd/cros_ec.h | 2 | ||||
-rw-r--r-- | include/linux/mfd/cros_ec_commands.h | 91 | ||||
-rw-r--r-- | include/linux/mfd/motorola-cpcap.h | 292 | ||||
-rw-r--r-- | include/linux/mfd/stm32-timers.h | 71 | ||||
-rw-r--r-- | include/linux/mfd/tmio.h | 6 | ||||
-rw-r--r-- | include/linux/mfd/tps65910.h | 1 |
9 files changed, 472 insertions, 17 deletions
diff --git a/include/linux/mfd/abx500.h b/include/linux/mfd/abx500.h index 552cc1d61cc7..44412c9d26e1 100644 --- a/include/linux/mfd/abx500.h +++ b/include/linux/mfd/abx500.h @@ -45,7 +45,7 @@ enum abx500_adc_therm { * struct abx500_res_to_temp - defines one point in a temp to res curve. To * be used in battery packs that combines the identification resistor with a * NTC resistor. - * @temp: battery pack temperature in Celcius + * @temp: battery pack temperature in Celsius * @resist: NTC resistor net total resistance */ struct abx500_res_to_temp { diff --git a/include/linux/mfd/abx500/ab8500-bm.h b/include/linux/mfd/abx500/ab8500-bm.h index 12a5b396921e..e63681eb6c62 100644 --- a/include/linux/mfd/abx500/ab8500-bm.h +++ b/include/linux/mfd/abx500/ab8500-bm.h @@ -279,7 +279,7 @@ enum bup_vch_sel { * struct res_to_temp - defines one point in a temp to res curve. To * be used in battery packs that combines the identification resistor with a * NTC resistor. - * @temp: battery pack temperature in Celcius + * @temp: battery pack temperature in Celsius * @resist: NTC resistor net total resistance */ struct res_to_temp { @@ -290,7 +290,7 @@ struct res_to_temp { /** * struct batres_vs_temp - defines one point in a temp vs battery internal * resistance curve. - * @temp: battery pack temperature in Celcius + * @temp: battery pack temperature in Celsius * @resist: battery internal reistance in mOhm */ struct batres_vs_temp { diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h index f848ee86a339..0d9a1ff38393 100644 --- a/include/linux/mfd/axp20x.h +++ b/include/linux/mfd/axp20x.h @@ -235,10 +235,20 @@ enum axp20x_variants { #define AXP22X_BATLOW_THRES1 0xe6 /* AXP288 specific registers */ +#define AXP288_POWER_REASON 0x02 +#define AXP288_BC_GLOBAL 0x2c +#define AXP288_BC_VBUS_CNTL 0x2d +#define AXP288_BC_USB_STAT 0x2e +#define AXP288_BC_DET_STAT 0x2f #define AXP288_PMIC_ADC_H 0x56 #define AXP288_PMIC_ADC_L 0x57 +#define AXP288_TS_ADC_H 0x58 +#define AXP288_TS_ADC_L 0x59 +#define AXP288_GP_ADC_H 0x5a +#define AXP288_GP_ADC_L 0x5b #define AXP288_ADC_TS_PIN_CTRL 0x84 -#define AXP288_PMIC_ADC_EN 0x84 +#define AXP288_RT_BATT_V_H 0xa0 +#define AXP288_RT_BATT_V_L 0xa1 /* Fuel Gauge */ #define AXP288_FG_RDC1_REG 0xba @@ -515,14 +525,10 @@ enum axp809_irqs { AXP809_IRQ_GPIO0_INPUT, }; -#define AXP288_TS_ADC_H 0x58 -#define AXP288_TS_ADC_L 0x59 -#define AXP288_GP_ADC_H 0x5a -#define AXP288_GP_ADC_L 0x5b - struct axp20x_dev { struct device *dev; int irq; + unsigned long irq_flags; struct regmap *regmap; struct regmap_irq_chip_data *regmap_irqc; long variant; @@ -582,7 +588,7 @@ int axp20x_match_device(struct axp20x_dev *axp20x); int axp20x_device_probe(struct axp20x_dev *axp20x); /** - * axp20x_device_probe(): Remove a axp20x device + * axp20x_device_remove(): Remove a axp20x device * * @axp20x: axp20x device to remove * diff --git a/include/linux/mfd/cros_ec.h b/include/linux/mfd/cros_ec.h index f62043a75f43..7a01c94496f1 100644 --- a/include/linux/mfd/cros_ec.h +++ b/include/linux/mfd/cros_ec.h @@ -103,6 +103,7 @@ struct cros_ec_command { * @din_size: size of din buffer to allocate (zero to use static din) * @dout_size: size of dout buffer to allocate (zero to use static dout) * @wake_enabled: true if this device can wake the system from sleep + * @suspended: true if this device had been suspended * @cmd_xfer: send command to EC and get response * Returns the number of bytes received if the communication succeeded, but * that doesn't mean the EC was happy with the command. The caller @@ -136,6 +137,7 @@ struct cros_ec_device { int din_size; int dout_size; bool wake_enabled; + bool suspended; int (*cmd_xfer)(struct cros_ec_device *ec, struct cros_ec_command *msg); int (*pkt_xfer)(struct cros_ec_device *ec, diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h index 1683003603f3..f1ef6388c233 100644 --- a/include/linux/mfd/cros_ec_commands.h +++ b/include/linux/mfd/cros_ec_commands.h @@ -1441,7 +1441,8 @@ enum motionsensor_type { MOTIONSENSE_TYPE_PROX = 3, MOTIONSENSE_TYPE_LIGHT = 4, MOTIONSENSE_TYPE_ACTIVITY = 5, - MOTIONSENSE_TYPE_MAX + MOTIONSENSE_TYPE_BARO = 6, + MOTIONSENSE_TYPE_MAX, }; /* List of motion sensor locations. */ @@ -1839,18 +1840,69 @@ struct ec_response_tmp006_get_raw { * * Returns raw data for keyboard cols; see ec_response_mkbp_info.cols for * expected response size. + * + * NOTE: This has been superseded by EC_CMD_MKBP_GET_NEXT_EVENT. If you wish + * to obtain the instantaneous state, use EC_CMD_MKBP_INFO with the type + * EC_MKBP_INFO_CURRENT and event EC_MKBP_EVENT_KEY_MATRIX. */ #define EC_CMD_MKBP_STATE 0x60 -/* Provide information about the matrix : number of rows and columns */ +/* + * Provide information about various MKBP things. See enum ec_mkbp_info_type. + */ #define EC_CMD_MKBP_INFO 0x61 struct ec_response_mkbp_info { uint32_t rows; uint32_t cols; - uint8_t switches; + /* Formerly "switches", which was 0. */ + uint8_t reserved; } __packed; +struct ec_params_mkbp_info { + uint8_t info_type; + uint8_t event_type; +} __packed; + +enum ec_mkbp_info_type { + /* + * Info about the keyboard matrix: number of rows and columns. + * + * Returns struct ec_response_mkbp_info. + */ + EC_MKBP_INFO_KBD = 0, + + /* + * For buttons and switches, info about which specifically are + * supported. event_type must be set to one of the values in enum + * ec_mkbp_event. + * + * For EC_MKBP_EVENT_BUTTON and EC_MKBP_EVENT_SWITCH, returns a 4 byte + * bitmask indicating which buttons or switches are present. See the + * bit inidices below. + */ + EC_MKBP_INFO_SUPPORTED = 1, + + /* + * Instantaneous state of buttons and switches. + * + * event_type must be set to one of the values in enum ec_mkbp_event. + * + * For EC_MKBP_EVENT_KEY_MATRIX, returns uint8_t key_matrix[13] + * indicating the current state of the keyboard matrix. + * + * For EC_MKBP_EVENT_HOST_EVENT, return uint32_t host_event, the raw + * event state. + * + * For EC_MKBP_EVENT_BUTTON, returns uint32_t buttons, indicating the + * state of supported buttons. + * + * For EC_MKBP_EVENT_SWITCH, returns uint32_t switches, indicating the + * state of supported switches. + */ + EC_MKBP_INFO_CURRENT = 2, +}; + /* Simulate key press */ #define EC_CMD_MKBP_SIMULATE_KEY 0x62 @@ -1983,6 +2035,12 @@ enum ec_mkbp_event { /* New Sensor FIFO data. The event data is fifo_info structure. */ EC_MKBP_EVENT_SENSOR_FIFO = 2, + /* The state of the non-matrixed buttons have changed. */ + EC_MKBP_EVENT_BUTTON = 3, + + /* The state of the switches have changed. */ + EC_MKBP_EVENT_SWITCH = 4, + /* Number of MKBP events */ EC_MKBP_EVENT_COUNT, }; @@ -1992,6 +2050,9 @@ union ec_response_get_next_data { /* Unaligned */ uint32_t host_event; + + uint32_t buttons; + uint32_t switches; } __packed; struct ec_response_get_next_event { @@ -2000,6 +2061,16 @@ struct ec_response_get_next_event { union ec_response_get_next_data data; } __packed; +/* Bit indices for buttons and switches.*/ +/* Buttons */ +#define EC_MKBP_POWER_BUTTON 0 +#define EC_MKBP_VOL_UP 1 +#define EC_MKBP_VOL_DOWN 2 + +/* Switches */ +#define EC_MKBP_LID_OPEN 0 +#define EC_MKBP_TABLET_MODE 1 + /*****************************************************************************/ /* Temperature sensor commands */ @@ -2477,6 +2548,20 @@ struct ec_params_ext_power_current_limit { uint32_t limit; /* in mA */ } __packed; +/* Inform the EC when entering a sleep state */ +#define EC_CMD_HOST_SLEEP_EVENT 0xa9 + +enum host_sleep_event { + HOST_SLEEP_EVENT_S3_SUSPEND = 1, + HOST_SLEEP_EVENT_S3_RESUME = 2, + HOST_SLEEP_EVENT_S0IX_SUSPEND = 3, + HOST_SLEEP_EVENT_S0IX_RESUME = 4 +}; + +struct ec_params_host_sleep_event { + uint8_t sleep_event; +} __packed; + /*****************************************************************************/ /* Smart battery pass-through */ diff --git a/include/linux/mfd/motorola-cpcap.h b/include/linux/mfd/motorola-cpcap.h new file mode 100644 index 000000000000..b4031c2b2214 --- /dev/null +++ b/include/linux/mfd/motorola-cpcap.h @@ -0,0 +1,292 @@ +/* + * The register defines are based on earlier cpcap.h in Motorola Linux kernel + * tree. + * + * Copyright (C) 2007-2009 Motorola, Inc. + * + * Rewritten for the real register offsets instead of enumeration + * to make the defines usable with Linux kernel regmap support + * + * Copyright (C) 2016 Tony Lindgren <tony@atomide.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define CPCAP_VENDOR_ST 0 +#define CPCAP_VENDOR_TI 1 + +#define CPCAP_REVISION_MAJOR(r) (((r) >> 4) + 1) +#define CPCAP_REVISION_MINOR(r) ((r) & 0xf) + +#define CPCAP_REVISION_1_0 0x08 +#define CPCAP_REVISION_1_1 0x09 +#define CPCAP_REVISION_2_0 0x10 +#define CPCAP_REVISION_2_1 0x11 + +/* CPCAP registers */ +#define CPCAP_REG_INT1 0x0000 /* Interrupt 1 */ +#define CPCAP_REG_INT2 0x0004 /* Interrupt 2 */ +#define CPCAP_REG_INT3 0x0008 /* Interrupt 3 */ +#define CPCAP_REG_INT4 0x000c /* Interrupt 4 */ +#define CPCAP_REG_INTM1 0x0010 /* Interrupt Mask 1 */ +#define CPCAP_REG_INTM2 0x0014 /* Interrupt Mask 2 */ +#define CPCAP_REG_INTM3 0x0018 /* Interrupt Mask 3 */ +#define CPCAP_REG_INTM4 0x001c /* Interrupt Mask 4 */ +#define CPCAP_REG_INTS1 0x0020 /* Interrupt Sense 1 */ +#define CPCAP_REG_INTS2 0x0024 /* Interrupt Sense 2 */ +#define CPCAP_REG_INTS3 0x0028 /* Interrupt Sense 3 */ +#define CPCAP_REG_INTS4 0x002c /* Interrupt Sense 4 */ +#define CPCAP_REG_ASSIGN1 0x0030 /* Resource Assignment 1 */ +#define CPCAP_REG_ASSIGN2 0x0034 /* Resource Assignment 2 */ +#define CPCAP_REG_ASSIGN3 0x0038 /* Resource Assignment 3 */ +#define CPCAP_REG_ASSIGN4 0x003c /* Resource Assignment 4 */ +#define CPCAP_REG_ASSIGN5 0x0040 /* Resource Assignment 5 */ +#define CPCAP_REG_ASSIGN6 0x0044 /* Resource Assignment 6 */ +#define CPCAP_REG_VERSC1 0x0048 /* Version Control 1 */ +#define CPCAP_REG_VERSC2 0x004c /* Version Control 2 */ + +#define CPCAP_REG_MI1 0x0200 /* Macro Interrupt 1 */ +#define CPCAP_REG_MIM1 0x0204 /* Macro Interrupt Mask 1 */ +#define CPCAP_REG_MI2 0x0208 /* Macro Interrupt 2 */ +#define CPCAP_REG_MIM2 0x020c /* Macro Interrupt Mask 2 */ +#define CPCAP_REG_UCC1 0x0210 /* UC Control 1 */ +#define CPCAP_REG_UCC2 0x0214 /* UC Control 2 */ + +#define CPCAP_REG_PC1 0x021c /* Power Cut 1 */ +#define CPCAP_REG_PC2 0x0220 /* Power Cut 2 */ +#define CPCAP_REG_BPEOL 0x0224 /* BP and EOL */ +#define CPCAP_REG_PGC 0x0228 /* Power Gate and Control */ +#define CPCAP_REG_MT1 0x022c /* Memory Transfer 1 */ +#define CPCAP_REG_MT2 0x0230 /* Memory Transfer 2 */ +#define CPCAP_REG_MT3 0x0234 /* Memory Transfer 3 */ +#define CPCAP_REG_PF 0x0238 /* Print Format */ + +#define CPCAP_REG_SCC 0x0400 /* System Clock Control */ +#define CPCAP_REG_SW1 0x0404 /* Stop Watch 1 */ +#define CPCAP_REG_SW2 0x0408 /* Stop Watch 2 */ +#define CPCAP_REG_UCTM 0x040c /* UC Turbo Mode */ +#define CPCAP_REG_TOD1 0x0410 /* Time of Day 1 */ +#define CPCAP_REG_TOD2 0x0414 /* Time of Day 2 */ +#define CPCAP_REG_TODA1 0x0418 /* Time of Day Alarm 1 */ +#define CPCAP_REG_TODA2 0x041c /* Time of Day Alarm 2 */ +#define CPCAP_REG_DAY 0x0420 /* Day */ +#define CPCAP_REG_DAYA 0x0424 /* Day Alarm */ +#define CPCAP_REG_VAL1 0x0428 /* Validity 1 */ +#define CPCAP_REG_VAL2 0x042c /* Validity 2 */ + +#define CPCAP_REG_SDVSPLL 0x0600 /* Switcher DVS and PLL */ +#define CPCAP_REG_SI2CC1 0x0604 /* Switcher I2C Control 1 */ +#define CPCAP_REG_Si2CC2 0x0608 /* Switcher I2C Control 2 */ +#define CPCAP_REG_S1C1 0x060c /* Switcher 1 Control 1 */ +#define CPCAP_REG_S1C2 0x0610 /* Switcher 1 Control 2 */ +#define CPCAP_REG_S2C1 0x0614 /* Switcher 2 Control 1 */ +#define CPCAP_REG_S2C2 0x0618 /* Switcher 2 Control 2 */ +#define CPCAP_REG_S3C 0x061c /* Switcher 3 Control */ +#define CPCAP_REG_S4C1 0x0620 /* Switcher 4 Control 1 */ +#define CPCAP_REG_S4C2 0x0624 /* Switcher 4 Control 2 */ +#define CPCAP_REG_S5C 0x0628 /* Switcher 5 Control */ +#define CPCAP_REG_S6C 0x062c /* Switcher 6 Control */ +#define CPCAP_REG_VCAMC 0x0630 /* VCAM Control */ +#define CPCAP_REG_VCSIC 0x0634 /* VCSI Control */ +#define CPCAP_REG_VDACC 0x0638 /* VDAC Control */ +#define CPCAP_REG_VDIGC 0x063c /* VDIG Control */ +#define CPCAP_REG_VFUSEC 0x0640 /* VFUSE Control */ +#define CPCAP_REG_VHVIOC 0x0644 /* VHVIO Control */ +#define CPCAP_REG_VSDIOC 0x0648 /* VSDIO Control */ +#define CPCAP_REG_VPLLC 0x064c /* VPLL Control */ +#define CPCAP_REG_VRF1C 0x0650 /* VRF1 Control */ +#define CPCAP_REG_VRF2C 0x0654 /* VRF2 Control */ +#define CPCAP_REG_VRFREFC 0x0658 /* VRFREF Control */ +#define CPCAP_REG_VWLAN1C 0x065c /* VWLAN1 Control */ +#define CPCAP_REG_VWLAN2C 0x0660 /* VWLAN2 Control */ +#define CPCAP_REG_VSIMC 0x0664 /* VSIM Control */ +#define CPCAP_REG_VVIBC 0x0668 /* VVIB Control */ +#define CPCAP_REG_VUSBC 0x066c /* VUSB Control */ +#define CPCAP_REG_VUSBINT1C 0x0670 /* VUSBINT1 Control */ +#define CPCAP_REG_VUSBINT2C 0x0674 /* VUSBINT2 Control */ +#define CPCAP_REG_URT 0x0678 /* Useroff Regulator Trigger */ +#define CPCAP_REG_URM1 0x067c /* Useroff Regulator Mask 1 */ +#define CPCAP_REG_URM2 0x0680 /* Useroff Regulator Mask 2 */ + +#define CPCAP_REG_VAUDIOC 0x0800 /* VAUDIO Control */ +#define CPCAP_REG_CC 0x0804 /* Codec Control */ +#define CPCAP_REG_CDI 0x0808 /* Codec Digital Interface */ +#define CPCAP_REG_SDAC 0x080c /* Stereo DAC */ +#define CPCAP_REG_SDACDI 0x0810 /* Stereo DAC Digital Interface */ +#define CPCAP_REG_TXI 0x0814 /* TX Inputs */ +#define CPCAP_REG_TXMP 0x0818 /* TX MIC PGA's */ +#define CPCAP_REG_RXOA 0x081c /* RX Output Amplifiers */ +#define CPCAP_REG_RXVC 0x0820 /* RX Volume Control */ +#define CPCAP_REG_RXCOA 0x0824 /* RX Codec to Output Amps */ +#define CPCAP_REG_RXSDOA 0x0828 /* RX Stereo DAC to Output Amps */ +#define CPCAP_REG_RXEPOA 0x082c /* RX External PGA to Output Amps */ +#define CPCAP_REG_RXLL 0x0830 /* RX Low Latency */ +#define CPCAP_REG_A2LA 0x0834 /* A2 Loudspeaker Amplifier */ +#define CPCAP_REG_MIPIS1 0x0838 /* MIPI Slimbus 1 */ +#define CPCAP_REG_MIPIS2 0x083c /* MIPI Slimbus 2 */ +#define CPCAP_REG_MIPIS3 0x0840 /* MIPI Slimbus 3. */ +#define CPCAP_REG_LVAB 0x0844 /* LMR Volume and A4 Balanced. */ + +#define CPCAP_REG_CCC1 0x0a00 /* Coulomb Counter Control 1 */ +#define CPCAP_REG_CRM 0x0a04 /* Charger and Reverse Mode */ +#define CPCAP_REG_CCCC2 0x0a08 /* Coincell and Coulomb Ctr Ctrl 2 */ +#define CPCAP_REG_CCS1 0x0a0c /* Coulomb Counter Sample 1 */ +#define CPCAP_REG_CCS2 0x0a10 /* Coulomb Counter Sample 2 */ +#define CPCAP_REG_CCA1 0x0a14 /* Coulomb Counter Accumulator 1 */ +#define CPCAP_REG_CCA2 0x0a18 /* Coulomb Counter Accumulator 2 */ +#define CPCAP_REG_CCM 0x0a1c /* Coulomb Counter Mode */ +#define CPCAP_REG_CCO 0x0a20 /* Coulomb Counter Offset */ +#define CPCAP_REG_CCI 0x0a24 /* Coulomb Counter Integrator */ + +#define CPCAP_REG_ADCC1 0x0c00 /* A/D Converter Configuration 1 */ +#define CPCAP_REG_ADCC2 0x0c04 /* A/D Converter Configuration 2 */ +#define CPCAP_REG_ADCD0 0x0c08 /* A/D Converter Data 0 */ +#define CPCAP_REG_ADCD1 0x0c0c /* A/D Converter Data 1 */ +#define CPCAP_REG_ADCD2 0x0c10 /* A/D Converter Data 2 */ +#define CPCAP_REG_ADCD3 0x0c14 /* A/D Converter Data 3 */ +#define CPCAP_REG_ADCD4 0x0c18 /* A/D Converter Data 4 */ +#define CPCAP_REG_ADCD5 0x0c1c /* A/D Converter Data 5 */ +#define CPCAP_REG_ADCD6 0x0c20 /* A/D Converter Data 6 */ +#define CPCAP_REG_ADCD7 0x0c24 /* A/D Converter Data 7 */ +#define CPCAP_REG_ADCAL1 0x0c28 /* A/D Converter Calibration 1 */ +#define CPCAP_REG_ADCAL2 0x0c2c /* A/D Converter Calibration 2 */ + +#define CPCAP_REG_USBC1 0x0e00 /* USB Control 1 */ +#define CPCAP_REG_USBC2 0x0e04 /* USB Control 2 */ +#define CPCAP_REG_USBC3 0x0e08 /* USB Control 3 */ +#define CPCAP_REG_UVIDL 0x0e0c /* ULPI Vendor ID Low */ +#define CPCAP_REG_UVIDH 0x0e10 /* ULPI Vendor ID High */ +#define CPCAP_REG_UPIDL 0x0e14 /* ULPI Product ID Low */ +#define CPCAP_REG_UPIDH 0x0e18 /* ULPI Product ID High */ +#define CPCAP_REG_UFC1 0x0e1c /* ULPI Function Control 1 */ +#define CPCAP_REG_UFC2 0x0e20 /* ULPI Function Control 2 */ +#define CPCAP_REG_UFC3 0x0e24 /* ULPI Function Control 3 */ +#define CPCAP_REG_UIC1 0x0e28 /* ULPI Interface Control 1 */ +#define CPCAP_REG_UIC2 0x0e2c /* ULPI Interface Control 2 */ +#define CPCAP_REG_UIC3 0x0e30 /* ULPI Interface Control 3 */ +#define CPCAP_REG_USBOTG1 0x0e34 /* USB OTG Control 1 */ +#define CPCAP_REG_USBOTG2 0x0e38 /* USB OTG Control 2 */ +#define CPCAP_REG_USBOTG3 0x0e3c /* USB OTG Control 3 */ +#define CPCAP_REG_UIER1 0x0e40 /* USB Interrupt Enable Rising 1 */ +#define CPCAP_REG_UIER2 0x0e44 /* USB Interrupt Enable Rising 2 */ +#define CPCAP_REG_UIER3 0x0e48 /* USB Interrupt Enable Rising 3 */ +#define CPCAP_REG_UIEF1 0x0e4c /* USB Interrupt Enable Falling 1 */ +#define CPCAP_REG_UIEF2 0x0e50 /* USB Interrupt Enable Falling 1 */ +#define CPCAP_REG_UIEF3 0x0e54 /* USB Interrupt Enable Falling 1 */ +#define CPCAP_REG_UIS 0x0e58 /* USB Interrupt Status */ +#define CPCAP_REG_UIL 0x0e5c /* USB Interrupt Latch */ +#define CPCAP_REG_USBD 0x0e60 /* USB Debug */ +#define CPCAP_REG_SCR1 0x0e64 /* Scratch 1 */ +#define CPCAP_REG_SCR2 0x0e68 /* Scratch 2 */ +#define CPCAP_REG_SCR3 0x0e6c /* Scratch 3 */ + +#define CPCAP_REG_VMC 0x0eac /* Video Mux Control */ +#define CPCAP_REG_OWDC 0x0eb0 /* One Wire Device Control */ +#define CPCAP_REG_GPIO0 0x0eb4 /* GPIO 0 Control */ + +#define CPCAP_REG_GPIO1 0x0ebc /* GPIO 1 Control */ + +#define CPCAP_REG_GPIO2 0x0ec4 /* GPIO 2 Control */ + +#define CPCAP_REG_GPIO3 0x0ecc /* GPIO 3 Control */ + +#define CPCAP_REG_GPIO4 0x0ed4 /* GPIO 4 Control */ + +#define CPCAP_REG_GPIO5 0x0edc /* GPIO 5 Control */ + +#define CPCAP_REG_GPIO6 0x0ee4 /* GPIO 6 Control */ + +#define CPCAP_REG_MDLC 0x1000 /* Main Display Lighting Control */ +#define CPCAP_REG_KLC 0x1004 /* Keypad Lighting Control */ +#define CPCAP_REG_ADLC 0x1008 /* Aux Display Lighting Control */ +#define CPCAP_REG_REDC 0x100c /* Red Triode Control */ +#define CPCAP_REG_GREENC 0x1010 /* Green Triode Control */ +#define CPCAP_REG_BLUEC 0x1014 /* Blue Triode Control */ +#define CPCAP_REG_CFC 0x1018 /* Camera Flash Control */ +#define CPCAP_REG_ABC 0x101c /* Adaptive Boost Control */ +#define CPCAP_REG_BLEDC 0x1020 /* Bluetooth LED Control */ +#define CPCAP_REG_CLEDC 0x1024 /* Camera Privacy LED Control */ + +#define CPCAP_REG_OW1C 0x1200 /* One Wire 1 Command */ +#define CPCAP_REG_OW1D 0x1204 /* One Wire 1 Data */ +#define CPCAP_REG_OW1I 0x1208 /* One Wire 1 Interrupt */ +#define CPCAP_REG_OW1IE 0x120c /* One Wire 1 Interrupt Enable */ + +#define CPCAP_REG_OW1 0x1214 /* One Wire 1 Control */ + +#define CPCAP_REG_OW2C 0x1220 /* One Wire 2 Command */ +#define CPCAP_REG_OW2D 0x1224 /* One Wire 2 Data */ +#define CPCAP_REG_OW2I 0x1228 /* One Wire 2 Interrupt */ +#define CPCAP_REG_OW2IE 0x122c /* One Wire 2 Interrupt Enable */ + +#define CPCAP_REG_OW2 0x1234 /* One Wire 2 Control */ + +#define CPCAP_REG_OW3C 0x1240 /* One Wire 3 Command */ +#define CPCAP_REG_OW3D 0x1244 /* One Wire 3 Data */ +#define CPCAP_REG_OW3I 0x1248 /* One Wire 3 Interrupt */ +#define CPCAP_REG_OW3IE 0x124c /* One Wire 3 Interrupt Enable */ + +#define CPCAP_REG_OW3 0x1254 /* One Wire 3 Control */ +#define CPCAP_REG_GCAIC 0x1258 /* GCAI Clock Control */ +#define CPCAP_REG_GCAIM 0x125c /* GCAI GPIO Mode */ +#define CPCAP_REG_LGDIR 0x1260 /* LMR GCAI GPIO Direction */ +#define CPCAP_REG_LGPU 0x1264 /* LMR GCAI GPIO Pull-up */ +#define CPCAP_REG_LGPIN 0x1268 /* LMR GCAI GPIO Pin */ +#define CPCAP_REG_LGMASK 0x126c /* LMR GCAI GPIO Mask */ +#define CPCAP_REG_LDEB 0x1270 /* LMR Debounce Settings */ +#define CPCAP_REG_LGDET 0x1274 /* LMR GCAI Detach Detect */ +#define CPCAP_REG_LMISC 0x1278 /* LMR Misc Bits */ +#define CPCAP_REG_LMACE 0x127c /* LMR Mace IC Support */ + +#define CPCAP_REG_TEST 0x7c00 /* Test */ + +#define CPCAP_REG_ST_TEST1 0x7d08 /* ST Test1 */ + +#define CPCAP_REG_ST_TEST2 0x7d18 /* ST Test2 */ + +/* + * Helpers for child devices to check the revision and vendor. + * + * REVISIT: No documentation for the bits below, please update + * to use proper names for defines when available. + */ + +static inline int cpcap_get_revision(struct device *dev, + struct regmap *regmap, + u16 *revision) +{ + unsigned int val; + int ret; + + ret = regmap_read(regmap, CPCAP_REG_VERSC1, &val); + if (ret) { + dev_err(dev, "Could not read revision\n"); + + return ret; + } + + *revision = ((val >> 3) & 0x7) | ((val << 3) & 0x38); + + return 0; +} + +static inline int cpcap_get_vendor(struct device *dev, + struct regmap *regmap, + u16 *vendor) +{ + unsigned int val; + int ret; + + ret = regmap_read(regmap, CPCAP_REG_VERSC1, &val); + if (ret) { + dev_err(dev, "Could not read vendor\n"); + + return ret; + } + + *vendor = (val >> 6) & 0x7; + + return 0; +} diff --git a/include/linux/mfd/stm32-timers.h b/include/linux/mfd/stm32-timers.h new file mode 100644 index 000000000000..d0300045f04a --- /dev/null +++ b/include/linux/mfd/stm32-timers.h @@ -0,0 +1,71 @@ +/* + * Copyright (C) STMicroelectronics 2016 + * + * Author: Benjamin Gaignard <benjamin.gaignard@st.com> + * + * License terms: GNU General Public License (GPL), version 2 + */ + +#ifndef _LINUX_STM32_GPTIMER_H_ +#define _LINUX_STM32_GPTIMER_H_ + +#include <linux/clk.h> +#include <linux/regmap.h> + +#define TIM_CR1 0x00 /* Control Register 1 */ +#define TIM_CR2 0x04 /* Control Register 2 */ +#define TIM_SMCR 0x08 /* Slave mode control reg */ +#define TIM_DIER 0x0C /* DMA/interrupt register */ +#define TIM_SR 0x10 /* Status register */ +#define TIM_EGR 0x14 /* Event Generation Reg */ +#define TIM_CCMR1 0x18 /* Capt/Comp 1 Mode Reg */ +#define TIM_CCMR2 0x1C /* Capt/Comp 2 Mode Reg */ +#define TIM_CCER 0x20 /* Capt/Comp Enable Reg */ +#define TIM_PSC 0x28 /* Prescaler */ +#define TIM_ARR 0x2c /* Auto-Reload Register */ +#define TIM_CCR1 0x34 /* Capt/Comp Register 1 */ +#define TIM_CCR2 0x38 /* Capt/Comp Register 2 */ +#define TIM_CCR3 0x3C /* Capt/Comp Register 3 */ +#define TIM_CCR4 0x40 /* Capt/Comp Register 4 */ +#define TIM_BDTR 0x44 /* Break and Dead-Time Reg */ + +#define TIM_CR1_CEN BIT(0) /* Counter Enable */ +#define TIM_CR1_ARPE BIT(7) /* Auto-reload Preload Ena */ +#define TIM_CR2_MMS (BIT(4) | BIT(5) | BIT(6)) /* Master mode selection */ +#define TIM_SMCR_SMS (BIT(0) | BIT(1) | BIT(2)) /* Slave mode selection */ +#define TIM_SMCR_TS (BIT(4) | BIT(5) | BIT(6)) /* Trigger selection */ +#define TIM_DIER_UIE BIT(0) /* Update interrupt */ +#define TIM_SR_UIF BIT(0) /* Update interrupt flag */ +#define TIM_EGR_UG BIT(0) /* Update Generation */ +#define TIM_CCMR_PE BIT(3) /* Channel Preload Enable */ +#define TIM_CCMR_M1 (BIT(6) | BIT(5)) /* Channel PWM Mode 1 */ +#define TIM_CCER_CC1E BIT(0) /* Capt/Comp 1 out Ena */ +#define TIM_CCER_CC1P BIT(1) /* Capt/Comp 1 Polarity */ +#define TIM_CCER_CC1NE BIT(2) /* Capt/Comp 1N out Ena */ +#define TIM_CCER_CC1NP BIT(3) /* Capt/Comp 1N Polarity */ +#define TIM_CCER_CC2E BIT(4) /* Capt/Comp 2 out Ena */ +#define TIM_CCER_CC3E BIT(8) /* Capt/Comp 3 out Ena */ +#define TIM_CCER_CC4E BIT(12) /* Capt/Comp 4 out Ena */ +#define TIM_CCER_CCXE (BIT(0) | BIT(4) | BIT(8) | BIT(12)) +#define TIM_BDTR_BKE BIT(12) /* Break input enable */ +#define TIM_BDTR_BKP BIT(13) /* Break input polarity */ +#define TIM_BDTR_AOE BIT(14) /* Automatic Output Enable */ +#define TIM_BDTR_MOE BIT(15) /* Main Output Enable */ +#define TIM_BDTR_BKF (BIT(16) | BIT(17) | BIT(18) | BIT(19)) +#define TIM_BDTR_BK2F (BIT(20) | BIT(21) | BIT(22) | BIT(23)) +#define TIM_BDTR_BK2E BIT(24) /* Break 2 input enable */ +#define TIM_BDTR_BK2P BIT(25) /* Break 2 input polarity */ + +#define MAX_TIM_PSC 0xFFFF +#define TIM_CR2_MMS_SHIFT 4 +#define TIM_SMCR_TS_SHIFT 4 +#define TIM_BDTR_BKF_MASK 0xF +#define TIM_BDTR_BKF_SHIFT 16 +#define TIM_BDTR_BK2F_SHIFT 20 + +struct stm32_timers { + struct clk *clk; + struct regmap *regmap; + u32 max_arr; +}; +#endif diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h index fba44abd05ba..a1520d88ebf3 100644 --- a/include/linux/mfd/tmio.h +++ b/include/linux/mfd/tmio.h @@ -94,10 +94,8 @@ */ #define TMIO_MMC_HAVE_CMD12_CTRL (1 << 7) -/* - * Some controllers needs to set 1 on SDIO status reserved bits - */ -#define TMIO_MMC_SDIO_STATUS_QUIRK (1 << 8) +/* Controller has some SDIO status bits which must be 1 */ +#define TMIO_MMC_SDIO_STATUS_SETBITS (1 << 8) /* * Some controllers have a 32-bit wide data port register diff --git a/include/linux/mfd/tps65910.h b/include/linux/mfd/tps65910.h index 6483a6fdce59..ffb21e79204d 100644 --- a/include/linux/mfd/tps65910.h +++ b/include/linux/mfd/tps65910.h @@ -134,6 +134,7 @@ /* RTC_CTRL_REG bitfields */ #define TPS65910_RTC_CTRL_STOP_RTC 0x01 /*0=stop, 1=run */ +#define TPS65910_RTC_CTRL_AUTO_COMP 0x04 #define TPS65910_RTC_CTRL_GET_TIME 0x40 /* RTC_STATUS_REG bitfields */ |