diff options
Diffstat (limited to 'include/linux/sdla.h')
| -rw-r--r-- | include/linux/sdla.h | 339 |
1 files changed, 339 insertions, 0 deletions
diff --git a/include/linux/sdla.h b/include/linux/sdla.h new file mode 100644 index 000000000000..3b6afb8caa42 --- /dev/null +++ b/include/linux/sdla.h @@ -0,0 +1,339 @@ +/* + * INET An implementation of the TCP/IP protocol suite for the LINUX + * operating system. INET is implemented using the BSD Socket + * interface as the means of communication with the user level. + * + * Global definitions for the Frame relay interface. + * + * Version: @(#)if_ifrad.h 0.20 13 Apr 96 + * + * Author: Mike McLagan <mike.mclagan@linux.org> + * + * Changes: + * 0.15 Mike McLagan Structure packing + * + * 0.20 Mike McLagan New flags for S508 buffer handling + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef SDLA_H +#define SDLA_H + +/* adapter type */ +#define SDLA_TYPES +#define SDLA_S502A 5020 +#define SDLA_S502E 5021 +#define SDLA_S503 5030 +#define SDLA_S507 5070 +#define SDLA_S508 5080 +#define SDLA_S509 5090 +#define SDLA_UNKNOWN -1 + +/* port selection flags for the S508 */ +#define SDLA_S508_PORT_V35 0x00 +#define SDLA_S508_PORT_RS232 0x02 + +/* Z80 CPU speeds */ +#define SDLA_CPU_3M 0x00 +#define SDLA_CPU_5M 0x01 +#define SDLA_CPU_7M 0x02 +#define SDLA_CPU_8M 0x03 +#define SDLA_CPU_10M 0x04 +#define SDLA_CPU_16M 0x05 +#define SDLA_CPU_12M 0x06 + +/* some private IOCTLs */ +#define SDLA_IDENTIFY (FRAD_LAST_IOCTL + 1) +#define SDLA_CPUSPEED (FRAD_LAST_IOCTL + 2) +#define SDLA_PROTOCOL (FRAD_LAST_IOCTL + 3) + +#define SDLA_CLEARMEM (FRAD_LAST_IOCTL + 4) +#define SDLA_WRITEMEM (FRAD_LAST_IOCTL + 5) +#define SDLA_READMEM (FRAD_LAST_IOCTL + 6) + +struct sdla_mem { + int addr; + int len; + void __user *data; +}; + +#define SDLA_START (FRAD_LAST_IOCTL + 7) +#define SDLA_STOP (FRAD_LAST_IOCTL + 8) + +/* some offsets in the Z80's memory space */ +#define SDLA_NMIADDR 0x0000 +#define SDLA_CONF_ADDR 0x0010 +#define SDLA_S502A_NMIADDR 0x0066 +#define SDLA_CODE_BASEADDR 0x0100 +#define SDLA_WINDOW_SIZE 0x2000 +#define SDLA_ADDR_MASK 0x1FFF + +/* largest handleable block of data */ +#define SDLA_MAX_DATA 4080 +#define SDLA_MAX_MTU 4072 /* MAX_DATA - sizeof(fradhdr) */ +#define SDLA_MAX_DLCI 24 + +/* this should be the same as frad_conf */ +struct sdla_conf { + short station; + short config; + short kbaud; + short clocking; + short max_frm; + short T391; + short T392; + short N391; + short N392; + short N393; + short CIR_fwd; + short Bc_fwd; + short Be_fwd; + short CIR_bwd; + short Bc_bwd; + short Be_bwd; +}; + +/* this should be the same as dlci_conf */ +struct sdla_dlci_conf { + short config; + short CIR_fwd; + short Bc_fwd; + short Be_fwd; + short CIR_bwd; + short Bc_bwd; + short Be_bwd; + short Tc_fwd; + short Tc_bwd; + short Tf_max; + short Tb_max; +}; + +#ifndef __KERNEL__ + +void sdla(void *cfg_info, char *dev, struct frad_conf *conf, int quiet); + +#else + +/* important Z80 window addresses */ +#define SDLA_CONTROL_WND 0xE000 + +#define SDLA_502_CMD_BUF 0xEF60 +#define SDLA_502_RCV_BUF 0xA900 +#define SDLA_502_TXN_AVAIL 0xFFF1 +#define SDLA_502_RCV_AVAIL 0xFFF2 +#define SDLA_502_EVENT_FLAGS 0xFFF3 +#define SDLA_502_MDM_STATUS 0xFFF4 +#define SDLA_502_IRQ_INTERFACE 0xFFFD +#define SDLA_502_IRQ_PERMISSION 0xFFFE +#define SDLA_502_DATA_OFS 0x0010 + +#define SDLA_508_CMD_BUF 0xE000 +#define SDLA_508_TXBUF_INFO 0xF100 +#define SDLA_508_RXBUF_INFO 0xF120 +#define SDLA_508_EVENT_FLAGS 0xF003 +#define SDLA_508_MDM_STATUS 0xF004 +#define SDLA_508_IRQ_INTERFACE 0xF010 +#define SDLA_508_IRQ_PERMISSION 0xF011 +#define SDLA_508_TSE_OFFSET 0xF012 + +/* Event flags */ +#define SDLA_EVENT_STATUS 0x01 +#define SDLA_EVENT_DLCI_STATUS 0x02 +#define SDLA_EVENT_BAD_DLCI 0x04 +#define SDLA_EVENT_LINK_DOWN 0x40 + +/* IRQ Trigger flags */ +#define SDLA_INTR_RX 0x01 +#define SDLA_INTR_TX 0x02 +#define SDLA_INTR_MODEM 0x04 +#define SDLA_INTR_COMPLETE 0x08 +#define SDLA_INTR_STATUS 0x10 +#define SDLA_INTR_TIMER 0x20 + +/* DLCI status bits */ +#define SDLA_DLCI_DELETED 0x01 +#define SDLA_DLCI_ACTIVE 0x02 +#define SDLA_DLCI_WAITING 0x04 +#define SDLA_DLCI_NEW 0x08 +#define SDLA_DLCI_INCLUDED 0x40 + +/* valid command codes */ +#define SDLA_INFORMATION_WRITE 0x01 +#define SDLA_INFORMATION_READ 0x02 +#define SDLA_ISSUE_IN_CHANNEL_SIGNAL 0x03 +#define SDLA_SET_DLCI_CONFIGURATION 0x10 +#define SDLA_READ_DLCI_CONFIGURATION 0x11 +#define SDLA_DISABLE_COMMUNICATIONS 0x12 +#define SDLA_ENABLE_COMMUNICATIONS 0x13 +#define SDLA_READ_DLC_STATUS 0x14 +#define SDLA_READ_DLC_STATISTICS 0x15 +#define SDLA_FLUSH_DLC_STATISTICS 0x16 +#define SDLA_LIST_ACTIVE_DLCI 0x17 +#define SDLA_FLUSH_INFORMATION_BUFFERS 0x18 +#define SDLA_ADD_DLCI 0x20 +#define SDLA_DELETE_DLCI 0x21 +#define SDLA_ACTIVATE_DLCI 0x22 +#define SDLA_DEACTIVATE_DLCI 0x23 +#define SDLA_READ_MODEM_STATUS 0x30 +#define SDLA_SET_MODEM_STATUS 0x31 +#define SDLA_READ_COMMS_ERR_STATS 0x32 +#define SDLA_FLUSH_COMMS_ERR_STATS 0x33 +#define SDLA_READ_CODE_VERSION 0x40 +#define SDLA_SET_IRQ_TRIGGER 0x50 +#define SDLA_GET_IRQ_TRIGGER 0x51 + +/* In channel signal types */ +#define SDLA_ICS_LINK_VERIFY 0x02 +#define SDLA_ICS_STATUS_ENQ 0x03 + +/* modem status flags */ +#define SDLA_MODEM_DTR_HIGH 0x01 +#define SDLA_MODEM_RTS_HIGH 0x02 +#define SDLA_MODEM_DCD_HIGH 0x08 +#define SDLA_MODEM_CTS_HIGH 0x20 + +/* used for RET_MODEM interpretation */ +#define SDLA_MODEM_DCD_LOW 0x01 +#define SDLA_MODEM_CTS_LOW 0x02 + +/* return codes */ +#define SDLA_RET_OK 0x00 +#define SDLA_RET_COMMUNICATIONS 0x01 +#define SDLA_RET_CHANNEL_INACTIVE 0x02 +#define SDLA_RET_DLCI_INACTIVE 0x03 +#define SDLA_RET_DLCI_CONFIG 0x04 +#define SDLA_RET_BUF_TOO_BIG 0x05 +#define SDLA_RET_NO_DATA 0x05 +#define SDLA_RET_BUF_OVERSIZE 0x06 +#define SDLA_RET_CIR_OVERFLOW 0x07 +#define SDLA_RET_NO_BUFS 0x08 +#define SDLA_RET_TIMEOUT 0x0A +#define SDLA_RET_MODEM 0x10 +#define SDLA_RET_CHANNEL_OFF 0x11 +#define SDLA_RET_CHANNEL_ON 0x12 +#define SDLA_RET_DLCI_STATUS 0x13 +#define SDLA_RET_DLCI_UNKNOWN 0x14 +#define SDLA_RET_COMMAND_INVALID 0x1F + +/* Configuration flags */ +#define SDLA_DIRECT_RECV 0x0080 +#define SDLA_TX_NO_EXCEPT 0x0020 +#define SDLA_NO_ICF_MSGS 0x1000 +#define SDLA_TX50_RX50 0x0000 +#define SDLA_TX70_RX30 0x2000 +#define SDLA_TX30_RX70 0x4000 + +/* IRQ selection flags */ +#define SDLA_IRQ_RECEIVE 0x01 +#define SDLA_IRQ_TRANSMIT 0x02 +#define SDLA_IRQ_MODEM_STAT 0x04 +#define SDLA_IRQ_COMMAND 0x08 +#define SDLA_IRQ_CHANNEL 0x10 +#define SDLA_IRQ_TIMER 0x20 + +/* definitions for PC memory mapping */ +#define SDLA_8K_WINDOW 0x01 +#define SDLA_S502_SEG_A 0x10 +#define SDLA_S502_SEG_C 0x20 +#define SDLA_S502_SEG_D 0x00 +#define SDLA_S502_SEG_E 0x30 +#define SDLA_S507_SEG_A 0x00 +#define SDLA_S507_SEG_B 0x40 +#define SDLA_S507_SEG_C 0x80 +#define SDLA_S507_SEG_E 0xC0 +#define SDLA_S508_SEG_A 0x00 +#define SDLA_S508_SEG_C 0x10 +#define SDLA_S508_SEG_D 0x08 +#define SDLA_S508_SEG_E 0x18 + +/* SDLA adapter port constants */ +#define SDLA_IO_EXTENTS 0x04 + +#define SDLA_REG_CONTROL 0x00 +#define SDLA_REG_PC_WINDOW 0x01 /* offset for PC window select latch */ +#define SDLA_REG_Z80_WINDOW 0x02 /* offset for Z80 window select latch */ +#define SDLA_REG_Z80_CONTROL 0x03 /* offset for Z80 control latch */ + +#define SDLA_S502_STS 0x00 /* status reg for 502, 502E, 507 */ +#define SDLA_S508_GNRL 0x00 /* general purp. reg for 508 */ +#define SDLA_S508_STS 0x01 /* status reg for 508 */ +#define SDLA_S508_IDR 0x02 /* ID reg for 508 */ + +/* control register flags */ +#define SDLA_S502A_START 0x00 /* start the CPU */ +#define SDLA_S502A_INTREQ 0x02 +#define SDLA_S502A_INTEN 0x04 +#define SDLA_S502A_HALT 0x08 /* halt the CPU */ +#define SDLA_S502A_NMI 0x10 /* issue an NMI to the CPU */ + +#define SDLA_S502E_CPUEN 0x01 +#define SDLA_S502E_ENABLE 0x02 +#define SDLA_S502E_INTACK 0x04 + +#define SDLA_S507_ENABLE 0x01 +#define SDLA_S507_IRQ3 0x00 +#define SDLA_S507_IRQ4 0x20 +#define SDLA_S507_IRQ5 0x40 +#define SDLA_S507_IRQ7 0x60 +#define SDLA_S507_IRQ10 0x80 +#define SDLA_S507_IRQ11 0xA0 +#define SDLA_S507_IRQ12 0xC0 +#define SDLA_S507_IRQ15 0xE0 + +#define SDLA_HALT 0x00 +#define SDLA_CPUEN 0x02 +#define SDLA_MEMEN 0x04 +#define SDLA_S507_EPROMWR 0x08 +#define SDLA_S507_EPROMCLK 0x10 +#define SDLA_S508_INTRQ 0x08 +#define SDLA_S508_INTEN 0x10 + +struct sdla_cmd { + char opp_flag __attribute__((packed)); + char cmd __attribute__((packed)); + short length __attribute__((packed)); + char retval __attribute__((packed)); + short dlci __attribute__((packed)); + char flags __attribute__((packed)); + short rxlost_int __attribute__((packed)); + long rxlost_app __attribute__((packed)); + char reserve[2] __attribute__((packed)); + char data[SDLA_MAX_DATA] __attribute__((packed)); /* transfer data buffer */ +}; + +struct intr_info { + char flags __attribute__((packed)); + short txlen __attribute__((packed)); + char irq __attribute__((packed)); + char flags2 __attribute__((packed)); + short timeout __attribute__((packed)); +}; + +/* found in the 508's control window at RXBUF_INFO */ +struct buf_info { + unsigned short rse_num __attribute__((packed)); + unsigned long rse_base __attribute__((packed)); + unsigned long rse_next __attribute__((packed)); + unsigned long buf_base __attribute__((packed)); + unsigned short reserved __attribute__((packed)); + unsigned long buf_top __attribute__((packed)); +}; + +/* structure pointed to by rse_base in RXBUF_INFO struct */ +struct buf_entry { + char opp_flag __attribute__((packed)); + short length __attribute__((packed)); + short dlci __attribute__((packed)); + char flags __attribute__((packed)); + short timestamp __attribute__((packed)); + short reserved[2] __attribute__((packed)); + long buf_addr __attribute__((packed)); +}; + +#endif + +#endif |