diff options
Diffstat (limited to 'include/linux')
37 files changed, 2961 insertions, 1215 deletions
diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 143ce7e0bee1..668d007f0917 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -974,6 +974,15 @@ static inline int acpi_get_local_address(acpi_handle handle, u32 *addr) return -ENODEV; } +static inline int acpi_register_wakeup_handler(int wake_irq, + bool (*wakeup)(void *context), void *context) +{ + return -ENXIO; +} + +static inline void acpi_unregister_wakeup_handler( + bool (*wakeup)(void *context), void *context) { } + #endif /* !CONFIG_ACPI */ #ifdef CONFIG_ACPI_HOTPLUG_IOAPIC diff --git a/include/linux/bpf.h b/include/linux/bpf.h index f715e8863f4d..e7a163a3146b 100644 --- a/include/linux/bpf.h +++ b/include/linux/bpf.h @@ -193,7 +193,7 @@ struct bpf_map { atomic64_t usercnt; struct work_struct work; struct mutex freeze_mutex; - u64 writecnt; /* writable mmap cnt; protected by freeze_mutex */ + atomic64_t writecnt; }; static inline bool map_value_has_spin_lock(const struct bpf_map *map) @@ -1419,6 +1419,7 @@ void bpf_map_put(struct bpf_map *map); void *bpf_map_area_alloc(u64 size, int numa_node); void *bpf_map_area_mmapable_alloc(u64 size, int numa_node); void bpf_map_area_free(void *base); +bool bpf_map_write_active(const struct bpf_map *map); void bpf_map_init_from_attr(struct bpf_map *map, union bpf_attr *attr); int generic_map_lookup_batch(struct bpf_map *map, const union bpf_attr *attr, diff --git a/include/linux/ceph/ceph_fs.h b/include/linux/ceph/ceph_fs.h index bc2699feddbe..7ad6c3d0db7d 100644 --- a/include/linux/ceph/ceph_fs.h +++ b/include/linux/ceph/ceph_fs.h @@ -302,6 +302,8 @@ enum { CEPH_SESSION_REQUEST_FLUSH_MDLOG, }; +#define CEPH_SESSION_BLOCKLISTED (1 << 0) /* session blocklisted */ + extern const char *ceph_session_op_name(int op); struct ceph_mds_session_head { diff --git a/include/linux/ceph/osd_client.h b/include/linux/ceph/osd_client.h index 83fa08a06507..3431011f364d 100644 --- a/include/linux/ceph/osd_client.h +++ b/include/linux/ceph/osd_client.h @@ -475,6 +475,14 @@ extern void osd_req_op_alloc_hint_init(struct ceph_osd_request *osd_req, u64 expected_object_size, u64 expected_write_size, u32 flags); +extern int osd_req_op_copy_from_init(struct ceph_osd_request *req, + u64 src_snapid, u64 src_version, + struct ceph_object_id *src_oid, + struct ceph_object_locator *src_oloc, + u32 src_fadvise_flags, + u32 dst_fadvise_flags, + u32 truncate_seq, u64 truncate_size, + u8 copy_from_flags); extern struct ceph_osd_request *ceph_osdc_alloc_request(struct ceph_osd_client *osdc, struct ceph_snap_context *snapc, @@ -515,17 +523,6 @@ int ceph_osdc_call(struct ceph_osd_client *osdc, struct page *req_page, size_t req_len, struct page **resp_pages, size_t *resp_len); -int ceph_osdc_copy_from(struct ceph_osd_client *osdc, - u64 src_snapid, u64 src_version, - struct ceph_object_id *src_oid, - struct ceph_object_locator *src_oloc, - u32 src_fadvise_flags, - struct ceph_object_id *dst_oid, - struct ceph_object_locator *dst_oloc, - u32 dst_fadvise_flags, - u32 truncate_seq, u64 truncate_size, - u8 copy_from_flags); - /* watch/notify */ struct ceph_osd_linger_request * ceph_osdc_watch(struct ceph_osd_client *osdc, diff --git a/include/linux/dma-resv.h b/include/linux/dma-resv.h index 8b6c20636a79..dbd235ab447f 100644 --- a/include/linux/dma-resv.h +++ b/include/linux/dma-resv.h @@ -170,15 +170,20 @@ struct dma_resv_iter { /** @index: index into the shared fences */ unsigned int index; - /** @fences: the shared fences */ + /** @fences: the shared fences; private, *MUST* not dereference */ struct dma_resv_list *fences; + /** @shared_count: number of shared fences */ + unsigned int shared_count; + /** @is_restarted: true if this is the first returned fence */ bool is_restarted; }; struct dma_fence *dma_resv_iter_first_unlocked(struct dma_resv_iter *cursor); struct dma_fence *dma_resv_iter_next_unlocked(struct dma_resv_iter *cursor); +struct dma_fence *dma_resv_iter_first(struct dma_resv_iter *cursor); +struct dma_fence *dma_resv_iter_next(struct dma_resv_iter *cursor); /** * dma_resv_iter_begin - initialize a dma_resv_iter object @@ -244,6 +249,24 @@ static inline bool dma_resv_iter_is_restarted(struct dma_resv_iter *cursor) for (fence = dma_resv_iter_first_unlocked(cursor); \ fence; fence = dma_resv_iter_next_unlocked(cursor)) +/** + * dma_resv_for_each_fence - fence iterator + * @cursor: a struct dma_resv_iter pointer + * @obj: a dma_resv object pointer + * @all_fences: true if all fences should be returned + * @fence: the current fence + * + * Iterate over the fences in a struct dma_resv object while holding the + * &dma_resv.lock. @all_fences controls if the shared fences are returned as + * well. The cursor initialisation is part of the iterator and the fence stays + * valid as long as the lock is held and so no extra reference to the fence is + * taken. + */ +#define dma_resv_for_each_fence(cursor, obj, all_fences, fence) \ + for (dma_resv_iter_begin(cursor, obj, all_fences), \ + fence = dma_resv_iter_first(cursor); fence; \ + fence = dma_resv_iter_next(cursor)) + #define dma_resv_held(obj) lockdep_is_held(&(obj)->lock.base) #define dma_resv_assert_held(obj) lockdep_assert_held(&(obj)->lock.base) diff --git a/include/linux/efi.h b/include/linux/efi.h index 6b5d36babfcc..dbd39b20e034 100644 --- a/include/linux/efi.h +++ b/include/linux/efi.h @@ -362,6 +362,7 @@ void efi_native_runtime_setup(void); /* OEM GUIDs */ #define DELLEMC_EFI_RCI2_TABLE_GUID EFI_GUID(0x2d9f28a2, 0xa886, 0x456a, 0x97, 0xa8, 0xf1, 0x1e, 0xf2, 0x4f, 0xf4, 0x55) +#define AMD_SEV_MEM_ENCRYPT_GUID EFI_GUID(0x0cf29b71, 0x9e51, 0x433a, 0xa3, 0xb7, 0x81, 0xf3, 0xab, 0x16, 0xb8, 0x75) typedef struct { efi_guid_t guid; diff --git a/include/linux/fb.h b/include/linux/fb.h index 5950f8f5dc74..6f3db99ab990 100644 --- a/include/linux/fb.h +++ b/include/linux/fb.h @@ -262,7 +262,7 @@ struct fb_ops { /* Draws a rectangle */ void (*fb_fillrect) (struct fb_info *info, const struct fb_fillrect *rect); - /* Copy data from area to another */ + /* Copy data from area to another. Obsolete. */ void (*fb_copyarea) (struct fb_info *info, const struct fb_copyarea *region); /* Draws a image to the display */ void (*fb_imageblit) (struct fb_info *info, const struct fb_image *image); diff --git a/include/linux/genhd.h b/include/linux/genhd.h index 462634b4b48f..74c410263113 100644 --- a/include/linux/genhd.h +++ b/include/linux/genhd.h @@ -205,9 +205,9 @@ static inline dev_t disk_devt(struct gendisk *disk) void disk_uevent(struct gendisk *disk, enum kobject_action action); /* block/genhd.c */ -int device_add_disk(struct device *parent, struct gendisk *disk, - const struct attribute_group **groups); -static inline int add_disk(struct gendisk *disk) +int __must_check device_add_disk(struct device *parent, struct gendisk *disk, + const struct attribute_group **groups); +static inline int __must_check add_disk(struct gendisk *disk) { return device_add_disk(NULL, disk, NULL); } diff --git a/include/linux/hugetlb_cgroup.h b/include/linux/hugetlb_cgroup.h index c137396129db..ba025ae27882 100644 --- a/include/linux/hugetlb_cgroup.h +++ b/include/linux/hugetlb_cgroup.h @@ -128,6 +128,13 @@ static inline void resv_map_dup_hugetlb_cgroup_uncharge_info( css_get(resv_map->css); } +static inline void resv_map_put_hugetlb_cgroup_uncharge_info( + struct resv_map *resv_map) +{ + if (resv_map->css) + css_put(resv_map->css); +} + extern int hugetlb_cgroup_charge_cgroup(int idx, unsigned long nr_pages, struct hugetlb_cgroup **ptr); extern int hugetlb_cgroup_charge_cgroup_rsvd(int idx, unsigned long nr_pages, @@ -211,6 +218,11 @@ static inline void resv_map_dup_hugetlb_cgroup_uncharge_info( { } +static inline void resv_map_put_hugetlb_cgroup_uncharge_info( + struct resv_map *resv_map) +{ +} + static inline int hugetlb_cgroup_charge_cgroup(int idx, unsigned long nr_pages, struct hugetlb_cgroup **ptr) { diff --git a/include/linux/input/cy8ctmg110_pdata.h b/include/linux/input/cy8ctmg110_pdata.h deleted file mode 100644 index ee1d44545f30..000000000000 --- a/include/linux/input/cy8ctmg110_pdata.h +++ /dev/null @@ -1,10 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _LINUX_CY8CTMG110_PDATA_H -#define _LINUX_CY8CTMG110_PDATA_H - -struct cy8ctmg110_pdata -{ - int reset_pin; /* Reset pin is wired to this GPIO (optional) */ -}; - -#endif diff --git a/include/linux/ipc_namespace.h b/include/linux/ipc_namespace.h index 05e22770af51..b75395ec8d52 100644 --- a/include/linux/ipc_namespace.h +++ b/include/linux/ipc_namespace.h @@ -131,6 +131,16 @@ static inline struct ipc_namespace *get_ipc_ns(struct ipc_namespace *ns) return ns; } +static inline struct ipc_namespace *get_ipc_ns_not_zero(struct ipc_namespace *ns) +{ + if (ns) { + if (refcount_inc_not_zero(&ns->ns.count)) + return ns; + } + + return NULL; +} + extern void put_ipc_ns(struct ipc_namespace *ns); #else static inline struct ipc_namespace *copy_ipcs(unsigned long flags, @@ -147,6 +157,11 @@ static inline struct ipc_namespace *get_ipc_ns(struct ipc_namespace *ns) return ns; } +static inline struct ipc_namespace *get_ipc_ns_not_zero(struct ipc_namespace *ns) +{ + return ns; +} + static inline void put_ipc_ns(struct ipc_namespace *ns) { } diff --git a/include/linux/kernel.h b/include/linux/kernel.h index 968b4c4fe65b..77755ac3e189 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -85,7 +85,7 @@ struct completion; struct user; -#ifdef CONFIG_PREEMPT_VOLUNTARY +#ifdef CONFIG_PREEMPT_VOLUNTARY_BUILD extern int __cond_resched(void); # define might_resched() __cond_resched() diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index 60a35d9fe259..c310648cc8f1 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -150,7 +150,7 @@ static inline bool is_error_page(struct page *page) #define KVM_REQ_MMU_RELOAD (1 | KVM_REQUEST_WAIT | KVM_REQUEST_NO_WAKEUP) #define KVM_REQ_UNBLOCK 2 #define KVM_REQ_UNHALT 3 -#define KVM_REQ_VM_BUGGED (4 | KVM_REQUEST_WAIT | KVM_REQUEST_NO_WAKEUP) +#define KVM_REQ_VM_DEAD (4 | KVM_REQUEST_WAIT | KVM_REQUEST_NO_WAKEUP) #define KVM_REQUEST_ARCH_BASE 8 #define KVM_ARCH_REQ_FLAGS(nr, flags) ({ \ @@ -617,6 +617,7 @@ struct kvm { unsigned int max_halt_poll_ns; u32 dirty_ring_size; bool vm_bugged; + bool vm_dead; #ifdef CONFIG_HAVE_KVM_PM_NOTIFIER struct notifier_block pm_notifier; @@ -650,12 +651,19 @@ struct kvm { #define vcpu_err(vcpu, fmt, ...) \ kvm_err("vcpu%i " fmt, (vcpu)->vcpu_id, ## __VA_ARGS__) +static inline void kvm_vm_dead(struct kvm *kvm) +{ + kvm->vm_dead = true; + kvm_make_all_cpus_request(kvm, KVM_REQ_VM_DEAD); +} + static inline void kvm_vm_bugged(struct kvm *kvm) { kvm->vm_bugged = true; - kvm_make_all_cpus_request(kvm, KVM_REQ_VM_BUGGED); + kvm_vm_dead(kvm); } + #define KVM_BUG(cond, kvm, fmt...) \ ({ \ int __ret = (cond); \ @@ -866,7 +874,7 @@ void kvm_release_pfn_dirty(kvm_pfn_t pfn); void kvm_set_pfn_dirty(kvm_pfn_t pfn); void kvm_set_pfn_accessed(kvm_pfn_t pfn); -void kvm_release_pfn(kvm_pfn_t pfn, bool dirty, struct gfn_to_pfn_cache *cache); +void kvm_release_pfn(kvm_pfn_t pfn, bool dirty); int kvm_read_guest_page(struct kvm *kvm, gfn_t gfn, void *data, int offset, int len); int kvm_read_guest(struct kvm *kvm, gpa_t gpa, void *data, unsigned long len); @@ -942,12 +950,8 @@ struct kvm_memory_slot *kvm_vcpu_gfn_to_memslot(struct kvm_vcpu *vcpu, gfn_t gfn kvm_pfn_t kvm_vcpu_gfn_to_pfn_atomic(struct kvm_vcpu *vcpu, gfn_t gfn); kvm_pfn_t kvm_vcpu_gfn_to_pfn(struct kvm_vcpu *vcpu, gfn_t gfn); int kvm_vcpu_map(struct kvm_vcpu *vcpu, gpa_t gpa, struct kvm_host_map *map); -int kvm_map_gfn(struct kvm_vcpu *vcpu, gfn_t gfn, struct kvm_host_map *map, - struct gfn_to_pfn_cache *cache, bool atomic); struct page *kvm_vcpu_gfn_to_page(struct kvm_vcpu *vcpu, gfn_t gfn); void kvm_vcpu_unmap(struct kvm_vcpu *vcpu, struct kvm_host_map *map, bool dirty); -int kvm_unmap_gfn(struct kvm_vcpu *vcpu, struct kvm_host_map *map, - struct gfn_to_pfn_cache *cache, bool dirty, bool atomic); unsigned long kvm_vcpu_gfn_to_hva(struct kvm_vcpu *vcpu, gfn_t gfn); unsigned long kvm_vcpu_gfn_to_hva_prot(struct kvm_vcpu *vcpu, gfn_t gfn, bool *writable); int kvm_vcpu_read_guest_page(struct kvm_vcpu *vcpu, gfn_t gfn, void *data, int offset, diff --git a/include/linux/kvm_types.h b/include/linux/kvm_types.h index 2237abb93ccd..234eab059839 100644 --- a/include/linux/kvm_types.h +++ b/include/linux/kvm_types.h @@ -53,13 +53,6 @@ struct gfn_to_hva_cache { struct kvm_memory_slot *memslot; }; -struct gfn_to_pfn_cache { - u64 generation; - gfn_t gfn; - kvm_pfn_t pfn; - bool dirty; -}; - #ifdef KVM_ARCH_NR_OBJS_PER_MEMORY_CACHE /* * Memory caches are used to preallocate memory ahead of various MMU flows, diff --git a/include/linux/libata.h b/include/linux/libata.h index 2884383f1718..2a8404b26083 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -394,7 +394,7 @@ enum { /* This should match the actual table size of * ata_eh_cmd_timeout_table in libata-eh.c. */ - ATA_EH_CMD_TIMEOUT_TABLE_SIZE = 6, + ATA_EH_CMD_TIMEOUT_TABLE_SIZE = 7, /* Horkage types. May be set by libata or controller on drives (some horkage may be drive/controller pair dependent */ @@ -427,6 +427,7 @@ enum { ATA_HORKAGE_MAX_SEC_1024 = (1 << 25), /* Limit max sects to 1024 */ ATA_HORKAGE_MAX_TRIM_128M = (1 << 26), /* Limit max trim size to 128M */ ATA_HORKAGE_NO_NCQ_ON_ATI = (1 << 27), /* Disable NCQ on ATI chipset */ + ATA_HORKAGE_NO_ID_DEV_LOG = (1 << 28), /* Identify device log missing */ /* DMA mask for user DMA control: User visible values; DO NOT renumber */ diff --git a/include/linux/mlx5/eswitch.h b/include/linux/mlx5/eswitch.h index 97afcea39a7b..8b18fe9771f9 100644 --- a/include/linux/mlx5/eswitch.h +++ b/include/linux/mlx5/eswitch.h @@ -145,13 +145,13 @@ u32 mlx5_eswitch_get_vport_metadata_for_set(struct mlx5_eswitch *esw, GENMASK(31 - ESW_TUN_ID_BITS - ESW_RESERVED_BITS, \ ESW_TUN_OPTS_OFFSET + 1) -u8 mlx5_eswitch_mode(struct mlx5_core_dev *dev); +u8 mlx5_eswitch_mode(const struct mlx5_core_dev *dev); u16 mlx5_eswitch_get_total_vports(const struct mlx5_core_dev *dev); struct mlx5_core_dev *mlx5_eswitch_get_core_dev(struct mlx5_eswitch *esw); #else /* CONFIG_MLX5_ESWITCH */ -static inline u8 mlx5_eswitch_mode(struct mlx5_core_dev *dev) +static inline u8 mlx5_eswitch_mode(const struct mlx5_core_dev *dev) { return MLX5_ESWITCH_NONE; } diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h index bb8c6f5f19bc..c3a6e6209600 100644 --- a/include/linux/mm_types.h +++ b/include/linux/mm_types.h @@ -105,7 +105,18 @@ struct page { struct page_pool *pp; unsigned long _pp_mapping_pad; unsigned long dma_addr; - atomic_long_t pp_frag_count; + union { + /** + * dma_addr_upper: might require a 64-bit + * value on 32-bit architectures. + */ + unsigned long dma_addr_upper; + /** + * For frag page support, not supported in + * 32-bit architectures with 64-bit DMA. + */ + atomic_long_t pp_frag_count; + }; }; struct { /* slab, slob and slub */ union { diff --git a/include/linux/msi.h b/include/linux/msi.h index 49cf6eb222e7..e616f94c7c58 100644 --- a/include/linux/msi.h +++ b/include/linux/msi.h @@ -148,7 +148,7 @@ struct msi_desc { u8 is_msix : 1; u8 multiple : 3; u8 multi_cap : 3; - u8 maskbit : 1; + u8 can_mask : 1; u8 is_64 : 1; u8 is_virtual : 1; u16 entry_nr; diff --git a/include/linux/netfs.h b/include/linux/netfs.h index 12c4177f7703..ca0683b9e3d1 100644 --- a/include/linux/netfs.h +++ b/include/linux/netfs.h @@ -166,13 +166,13 @@ struct netfs_read_request { short error; /* 0 or error that occurred */ loff_t i_size; /* Size of the file */ loff_t start; /* Start position */ - pgoff_t no_unlock_page; /* Don't unlock this page after read */ + pgoff_t no_unlock_folio; /* Don't unlock this folio after read */ refcount_t usage; unsigned long flags; #define NETFS_RREQ_INCOMPLETE_IO 0 /* Some ioreqs terminated short or with error */ #define NETFS_RREQ_WRITE_TO_CACHE 1 /* Need to write to the cache */ -#define NETFS_RREQ_NO_UNLOCK_PAGE 2 /* Don't unlock no_unlock_page on completion */ -#define NETFS_RREQ_DONT_UNLOCK_PAGES 3 /* Don't unlock the pages on completion */ +#define NETFS_RREQ_NO_UNLOCK_FOLIO 2 /* Don't unlock no_unlock_folio on completion */ +#define NETFS_RREQ_DONT_UNLOCK_FOLIOS 3 /* Don't unlock the folios on completion */ #define NETFS_RREQ_FAILED 4 /* The request failed */ #define NETFS_RREQ_IN_PROGRESS 5 /* Unlocked when the request completes */ const struct netfs_read_request_ops *netfs_ops; @@ -190,7 +190,7 @@ struct netfs_read_request_ops { void (*issue_op)(struct netfs_read_subrequest *subreq); bool (*is_still_valid)(struct netfs_read_request *rreq); int (*check_write_begin)(struct file *file, loff_t pos, unsigned len, - struct page *page, void **_fsdata); + struct folio *folio, void **_fsdata); void (*done)(struct netfs_read_request *rreq); void (*cleanup)(struct address_space *mapping, void *netfs_priv); }; @@ -240,11 +240,11 @@ extern void netfs_readahead(struct readahead_control *, const struct netfs_read_request_ops *, void *); extern int netfs_readpage(struct file *, - struct page *, + struct folio *, const struct netfs_read_request_ops *, void *); extern int netfs_write_begin(struct file *, struct address_space *, - loff_t, unsigned int, unsigned int, struct page **, + loff_t, unsigned int, unsigned int, struct folio **, void **, const struct netfs_read_request_ops *, void *); diff --git a/include/linux/pagemap.h b/include/linux/pagemap.h index 6a30916b76e5..1a0c646eb6ff 100644 --- a/include/linux/pagemap.h +++ b/include/linux/pagemap.h @@ -253,6 +253,20 @@ static inline struct address_space *page_mapping_file(struct page *page) return folio_mapping(folio); } +/** + * folio_inode - Get the host inode for this folio. + * @folio: The folio. + * + * For folios which are in the page cache, return the inode that this folio + * belongs to. + * + * Do not call this for folios which aren't in the page cache. + */ +static inline struct inode *folio_inode(struct folio *folio) +{ + return folio->mapping->host; +} + static inline bool page_cache_add_speculative(struct page *page, int count) { VM_BUG_ON_PAGE(PageTail(page), page); @@ -280,6 +294,25 @@ static inline void folio_attach_private(struct folio *folio, void *data) } /** + * folio_change_private - Change private data on a folio. + * @folio: Folio to change the data on. + * @data: Data to set on the folio. + * + * Change the private data attached to a folio and return the old + * data. The page must previously have had data attached and the data + * must be detached before the folio will be freed. + * + * Return: Data that was previously attached to the folio. + */ +static inline void *folio_change_private(struct folio *folio, void *data) +{ + void *old = folio_get_private(folio); + + folio->private = data; + return old; +} + +/** * folio_detach_private - Detach private data from a folio. * @folio: Folio to detach data from. * diff --git a/include/linux/pci.h b/include/linux/pci.h index 138d764c1c35..18a75c8e615c 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -233,6 +233,8 @@ enum pci_dev_flags { PCI_DEV_FLAGS_NO_FLR_RESET = (__force pci_dev_flags_t) (1 << 10), /* Don't use Relaxed Ordering for TLPs directed at this device */ PCI_DEV_FLAGS_NO_RELAXED_ORDERING = (__force pci_dev_flags_t) (1 << 11), + /* Device does honor MSI masking despite saying otherwise */ + PCI_DEV_FLAGS_HAS_MSI_MASKING = (__force pci_dev_flags_t) (1 << 12), }; enum pci_irq_reroute_variant { @@ -1666,6 +1668,7 @@ void pci_cfg_access_lock(struct pci_dev *dev); bool pci_cfg_access_trylock(struct pci_dev *dev); void pci_cfg_access_unlock(struct pci_dev *dev); +void pci_dev_lock(struct pci_dev *dev); int pci_dev_trylock(struct pci_dev *dev); void pci_dev_unlock(struct pci_dev *dev); diff --git a/include/linux/percpu.h b/include/linux/percpu.h index 98a9371133f8..ae4004e7957e 100644 --- a/include/linux/percpu.h +++ b/include/linux/percpu.h @@ -6,7 +6,6 @@ #include <linux/preempt.h> #include <linux/smp.h> #include <linux/cpumask.h> -#include <linux/printk.h> #include <linux/pfn.h> #include <linux/init.h> diff --git a/include/linux/posix-timers.h b/include/linux/posix-timers.h index 00fef0064355..5bbcd280bfd2 100644 --- a/include/linux/posix-timers.h +++ b/include/linux/posix-timers.h @@ -184,8 +184,10 @@ static inline void posix_cputimers_group_init(struct posix_cputimers *pct, #endif #ifdef CONFIG_POSIX_CPU_TIMERS_TASK_WORK +void clear_posix_cputimers_work(struct task_struct *p); void posix_cputimers_init_work(void); #else +static inline void clear_posix_cputimers_work(struct task_struct *p) { } static inline void posix_cputimers_init_work(void) { } #endif diff --git a/include/linux/printk.h b/include/linux/printk.h index 85b656f82d75..9497f6b98339 100644 --- a/include/linux/printk.h +++ b/include/linux/printk.h @@ -198,6 +198,7 @@ void dump_stack_print_info(const char *log_lvl); void show_regs_print_info(const char *log_lvl); extern asmlinkage void dump_stack_lvl(const char *log_lvl) __cold; extern asmlinkage void dump_stack(void) __cold; +void printk_trigger_flush(void); #else static inline __printf(1, 0) int vprintk(const char *s, va_list args) @@ -274,6 +275,9 @@ static inline void dump_stack_lvl(const char *log_lvl) static inline void dump_stack(void) { } +static inline void printk_trigger_flush(void) +{ +} #endif #ifdef CONFIG_SMP diff --git a/include/linux/pwm.h b/include/linux/pwm.h index 725c9b784e60..e6dac95e4960 100644 --- a/include/linux/pwm.h +++ b/include/linux/pwm.h @@ -429,16 +429,19 @@ struct pwm_device *devm_fwnode_pwm_get(struct device *dev, #else static inline struct pwm_device *pwm_request(int pwm_id, const char *label) { + might_sleep(); return ERR_PTR(-ENODEV); } static inline void pwm_free(struct pwm_device *pwm) { + might_sleep(); } static inline int pwm_apply_state(struct pwm_device *pwm, const struct pwm_state *state) { + might_sleep(); return -ENOTSUPP; } @@ -450,6 +453,7 @@ static inline int pwm_adjust_config(struct pwm_device *pwm) static inline int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns) { + might_sleep(); return -EINVAL; } @@ -462,11 +466,13 @@ static inline int pwm_capture(struct pwm_device *pwm, static inline int pwm_enable(struct pwm_device *pwm) { + might_sleep(); return -EINVAL; } static inline void pwm_disable(struct pwm_device *pwm) { + might_sleep(); } static inline int pwm_set_chip_data(struct pwm_device *pwm, void *data) @@ -493,12 +499,14 @@ static inline struct pwm_device *pwm_request_from_chip(struct pwm_chip *chip, unsigned int index, const char *label) { + might_sleep(); return ERR_PTR(-ENODEV); } static inline struct pwm_device *pwm_get(struct device *dev, const char *consumer) { + might_sleep(); return ERR_PTR(-ENODEV); } @@ -506,16 +514,19 @@ static inline struct pwm_device *of_pwm_get(struct device *dev, struct device_node *np, const char *con_id) { + might_sleep(); return ERR_PTR(-ENODEV); } static inline void pwm_put(struct pwm_device *pwm) { + might_sleep(); } static inline struct pwm_device *devm_pwm_get(struct device *dev, const char *consumer) { + might_sleep(); return ERR_PTR(-ENODEV); } @@ -523,6 +534,7 @@ static inline struct pwm_device *devm_of_pwm_get(struct device *dev, struct device_node *np, const char *con_id) { + might_sleep(); return ERR_PTR(-ENODEV); } @@ -530,6 +542,7 @@ static inline struct pwm_device * devm_fwnode_pwm_get(struct device *dev, struct fwnode_handle *fwnode, const char *con_id) { + might_sleep(); return ERR_PTR(-ENODEV); } #endif diff --git a/include/linux/rtc.h b/include/linux/rtc.h index bd611e26291d..47fd1c2d3a57 100644 --- a/include/linux/rtc.h +++ b/include/linux/rtc.h @@ -66,6 +66,8 @@ struct rtc_class_ops { int (*alarm_irq_enable)(struct device *, unsigned int enabled); int (*read_offset)(struct device *, long *offset); int (*set_offset)(struct device *, long offset); + int (*param_get)(struct device *, struct rtc_param *param); + int (*param_set)(struct device *, struct rtc_param *param); }; struct rtc_device; @@ -80,6 +82,7 @@ struct rtc_timer { /* flags */ #define RTC_DEV_BUSY 0 +#define RTC_NO_CDEV 1 struct rtc_device { struct device dev; diff --git a/include/linux/sched/signal.h b/include/linux/sched/signal.h index 23505394ef70..33a50642cf41 100644 --- a/include/linux/sched/signal.h +++ b/include/linux/sched/signal.h @@ -352,6 +352,7 @@ extern __must_check bool do_notify_parent(struct task_struct *, int); extern void __wake_up_parent(struct task_struct *p, struct task_struct *parent); extern void force_sig(int); extern void force_fatal_sig(int); +extern void force_exit_sig(int); extern int send_sig(int, struct task_struct *, int); extern int zap_other_threads(struct task_struct *p); extern struct sigqueue *sigqueue_alloc(void); diff --git a/include/linux/sched/task.h b/include/linux/sched/task.h index ba88a6987400..058d7f371e25 100644 --- a/include/linux/sched/task.h +++ b/include/linux/sched/task.h @@ -158,7 +158,7 @@ static inline struct vm_struct *task_stack_vm_area(const struct task_struct *t) * Protects ->fs, ->files, ->mm, ->group_info, ->comm, keyring * subscriptions and synchronises with wait4(). Also used in procfs. Also * pins the final release of task.io_context. Also protects ->cpuset and - * ->cgroup.subsys[]. And ->vfork_done. + * ->cgroup.subsys[]. And ->vfork_done. And ->sysvshm.shm_clist. * * Nests both inside and outside of read_lock(&tasklist_lock). * It must not be nested with write_lock_irq(&tasklist_lock), diff --git a/include/linux/sdb.h b/include/linux/sdb.h deleted file mode 100644 index a2404a2bbd10..000000000000 --- a/include/linux/sdb.h +++ /dev/null @@ -1,160 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * This is the official version 1.1 of sdb.h - */ -#ifndef __SDB_H__ -#define __SDB_H__ -#ifdef __KERNEL__ -#include <linux/types.h> -#else -#include <stdint.h> -#endif - -/* - * All structures are 64 bytes long and are expected - * to live in an array, one for each interconnect. - * Most fields of the structures are shared among the - * various types, and most-specific fields are at the - * beginning (for alignment reasons, and to keep the - * magic number at the head of the interconnect record - */ - -/* Product, 40 bytes at offset 24, 8-byte aligned - * - * device_id is vendor-assigned; version is device-specific, - * date is hex (e.g 0x20120501), name is UTF-8, blank-filled - * and not terminated with a 0 byte. - */ -struct sdb_product { - uint64_t vendor_id; /* 0x18..0x1f */ - uint32_t device_id; /* 0x20..0x23 */ - uint32_t version; /* 0x24..0x27 */ - uint32_t date; /* 0x28..0x2b */ - uint8_t name[19]; /* 0x2c..0x3e */ - uint8_t record_type; /* 0x3f */ -}; - -/* - * Component, 56 bytes at offset 8, 8-byte aligned - * - * The address range is first to last, inclusive - * (for example 0x100000 - 0x10ffff) - */ -struct sdb_component { - uint64_t addr_first; /* 0x08..0x0f */ - uint64_t addr_last; /* 0x10..0x17 */ - struct sdb_product product; /* 0x18..0x3f */ -}; - -/* Type of the SDB record */ -enum sdb_record_type { - sdb_type_interconnect = 0x00, - sdb_type_device = 0x01, - sdb_type_bridge = 0x02, - sdb_type_integration = 0x80, - sdb_type_repo_url = 0x81, - sdb_type_synthesis = 0x82, - sdb_type_empty = 0xFF, -}; - -/* Type 0: interconnect (first of the array) - * - * sdb_records is the length of the table including this first - * record, version is 1. The bus type is enumerated later. - */ -#define SDB_MAGIC 0x5344422d /* "SDB-" */ -struct sdb_interconnect { - uint32_t sdb_magic; /* 0x00-0x03 */ - uint16_t sdb_records; /* 0x04-0x05 */ - uint8_t sdb_version; /* 0x06 */ - uint8_t sdb_bus_type; /* 0x07 */ - struct sdb_component sdb_component; /* 0x08-0x3f */ -}; - -/* Type 1: device - * - * class is 0 for "custom device", other values are - * to be standardized; ABI version is for the driver, - * bus-specific bits are defined by each bus (see below) - */ -struct sdb_device { - uint16_t abi_class; /* 0x00-0x01 */ - uint8_t abi_ver_major; /* 0x02 */ - uint8_t abi_ver_minor; /* 0x03 */ - uint32_t bus_specific; /* 0x04-0x07 */ - struct sdb_component sdb_component; /* 0x08-0x3f */ -}; - -/* Type 2: bridge - * - * child is the address of the nested SDB table - */ -struct sdb_bridge { - uint64_t sdb_child; /* 0x00-0x07 */ - struct sdb_component sdb_component; /* 0x08-0x3f */ -}; - -/* Type 0x80: integration - * - * all types with bit 7 set are meta-information, so - * software can ignore the types it doesn't know. Here we - * just provide product information for an aggregate device - */ -struct sdb_integration { - uint8_t reserved[24]; /* 0x00-0x17 */ - struct sdb_product product; /* 0x08-0x3f */ -}; - -/* Type 0x81: Top module repository url - * - * again, an informative field that software can ignore - */ -struct sdb_repo_url { - uint8_t repo_url[63]; /* 0x00-0x3e */ - uint8_t record_type; /* 0x3f */ -}; - -/* Type 0x82: Synthesis tool information - * - * this informative record - */ -struct sdb_synthesis { - uint8_t syn_name[16]; /* 0x00-0x0f */ - uint8_t commit_id[16]; /* 0x10-0x1f */ - uint8_t tool_name[8]; /* 0x20-0x27 */ - uint32_t tool_version; /* 0x28-0x2b */ - uint32_t date; /* 0x2c-0x2f */ - uint8_t user_name[15]; /* 0x30-0x3e */ - uint8_t record_type; /* 0x3f */ -}; - -/* Type 0xff: empty - * - * this allows keeping empty slots during development, - * so they can be filled later with minimal efforts and - * no misleading description is ever shipped -- hopefully. - * It can also be used to pad a table to a desired length. - */ -struct sdb_empty { - uint8_t reserved[63]; /* 0x00-0x3e */ - uint8_t record_type; /* 0x3f */ -}; - -/* The type of bus, for bus-specific flags */ -enum sdb_bus_type { - sdb_wishbone = 0x00, - sdb_data = 0x01, -}; - -#define SDB_WB_WIDTH_MASK 0x0f -#define SDB_WB_ACCESS8 0x01 -#define SDB_WB_ACCESS16 0x02 -#define SDB_WB_ACCESS32 0x04 -#define SDB_WB_ACCESS64 0x08 -#define SDB_WB_LITTLE_ENDIAN 0x80 - -#define SDB_DATA_READ 0x04 -#define SDB_DATA_WRITE 0x02 -#define SDB_DATA_EXEC 0x01 - -#endif /* __SDB_H__ */ diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 686a666d073d..c8cb7e697d47 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -4226,7 +4226,7 @@ static inline void skb_remcsum_process(struct sk_buff *skb, void *ptr, return; } - if (unlikely(skb->ip_summed != CHECKSUM_COMPLETE)) { + if (unlikely(skb->ip_summed != CHECKSUM_COMPLETE)) { __skb_checksum_complete(skb); skb_postpull_rcsum(skb, skb->data, ptr - (void *)skb->data); } diff --git a/include/linux/spi/ads7846.h b/include/linux/spi/ads7846.h index 1a5eaef3b7f2..d424c1aadf38 100644 --- a/include/linux/spi/ads7846.h +++ b/include/linux/spi/ads7846.h @@ -1,17 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0 */ /* linux/spi/ads7846.h */ -/* Touchscreen characteristics vary between boards and models. The - * platform_data for the device's "struct device" holds this information. - * - * It's OK if the min/max values are zero. - */ -enum ads7846_filter { - ADS7846_FILTER_OK, - ADS7846_FILTER_REPEAT, - ADS7846_FILTER_IGNORE, -}; - struct ads7846_platform_data { u16 model; /* 7843, 7845, 7846, 7873. */ u16 vref_delay_usecs; /* 0 for external vref; etc */ @@ -51,10 +40,6 @@ struct ads7846_platform_data { int gpio_pendown_debounce; /* platform specific debounce time for * the gpio_pendown */ int (*get_pendown_state)(void); - int (*filter_init) (const struct ads7846_platform_data *pdata, - void **filter_data); - int (*filter) (void *filter_data, int data_idx, int *val); - void (*filter_cleanup)(void *filter_data); void (*wait_for_sync)(void); bool wakeup; unsigned long irq_flags; diff --git a/include/linux/trace_events.h b/include/linux/trace_events.h index 50453b287615..2d167ac3452c 100644 --- a/include/linux/trace_events.h +++ b/include/linux/trace_events.h @@ -673,7 +673,7 @@ struct trace_event_file { #define PERF_MAX_TRACE_SIZE 8192 -#define MAX_FILTER_STR_VAL 256 /* Should handle KSYM_SYMBOL_LEN */ +#define MAX_FILTER_STR_VAL 256U /* Should handle KSYM_SYMBOL_LEN */ enum event_trigger_type { ETT_NONE = (0), diff --git a/include/linux/vermagic.h b/include/linux/vermagic.h index 1eaaa93c37bf..329d63babaeb 100644 --- a/include/linux/vermagic.h +++ b/include/linux/vermagic.h @@ -15,7 +15,7 @@ #else #define MODULE_VERMAGIC_SMP "" #endif -#ifdef CONFIG_PREEMPT +#ifdef CONFIG_PREEMPT_BUILD #define MODULE_VERMAGIC_PREEMPT "preempt " #elif defined(CONFIG_PREEMPT_RT) #define MODULE_VERMAGIC_PREEMPT "preempt_rt " diff --git a/include/linux/virtio_net.h b/include/linux/virtio_net.h index b465f8f3e554..04e87f4b9417 100644 --- a/include/linux/virtio_net.h +++ b/include/linux/virtio_net.h @@ -120,10 +120,15 @@ retry: if (hdr->gso_type != VIRTIO_NET_HDR_GSO_NONE) { u16 gso_size = __virtio16_to_cpu(little_endian, hdr->gso_size); + unsigned int nh_off = p_off; struct skb_shared_info *shinfo = skb_shinfo(skb); + /* UFO may not include transport header in gso_size. */ + if (gso_type & SKB_GSO_UDP) + nh_off -= thlen; + /* Too small packets are not really GSO ones. */ - if (skb->len - p_off > gso_size) { + if (skb->len - nh_off > gso_size) { shinfo->gso_size = gso_size; shinfo->gso_type = gso_type; diff --git a/include/linux/zstd.h b/include/linux/zstd.h index e87f78c9b19c..113408eef6ec 100644 --- a/include/linux/zstd.h +++ b/include/linux/zstd.h @@ -1,138 +1,97 @@ +/* SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause */ /* - * Copyright (c) 2016-present, Yann Collet, Facebook, Inc. + * Copyright (c) Yann Collet, Facebook, Inc. * All rights reserved. * - * This source code is licensed under the BSD-style license found in the - * LICENSE file in the root directory of https://github.com/facebook/zstd. - * An additional grant of patent rights can be found in the PATENTS file in the - * same directory. - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. This program is dual-licensed; you may select - * either version 2 of the GNU General Public License ("GPL") or BSD license - * ("BSD"). + * This source code is licensed under both the BSD-style license (found in the + * LICENSE file in the root directory of https://github.com/facebook/zstd) and + * the GPLv2 (found in the COPYING file in the root directory of + * https://github.com/facebook/zstd). You may select, at your option, one of the + * above-listed licenses. */ -#ifndef ZSTD_H -#define ZSTD_H +#ifndef LINUX_ZSTD_H +#define LINUX_ZSTD_H -/* ====== Dependency ======*/ -#include <linux/types.h> /* size_t */ +/** + * This is a kernel-style API that wraps the upstream zstd API, which cannot be + * used directly because the symbols aren't exported. It exposes the minimal + * functionality which is currently required by users of zstd in the kernel. + * Expose extra functions from lib/zstd/zstd.h as needed. + */ +/* ====== Dependency ====== */ +#include <linux/types.h> +#include <linux/zstd_errors.h> +#include <linux/zstd_lib.h> -/*-***************************************************************************** - * Introduction +/* ====== Helper Functions ====== */ +/** + * zstd_compress_bound() - maximum compressed size in worst case scenario + * @src_size: The size of the data to compress. * - * zstd, short for Zstandard, is a fast lossless compression algorithm, - * targeting real-time compression scenarios at zlib-level and better - * compression ratios. The zstd compression library provides in-memory - * compression and decompression functions. The library supports compression - * levels from 1 up to ZSTD_maxCLevel() which is 22. Levels >= 20, labeled - * ultra, should be used with caution, as they require more memory. - * Compression can be done in: - * - a single step, reusing a context (described as Explicit memory management) - * - unbounded multiple steps (described as Streaming compression) - * The compression ratio achievable on small data can be highly improved using - * compression with a dictionary in: - * - a single step (described as Simple dictionary API) - * - a single step, reusing a dictionary (described as Fast dictionary API) - ******************************************************************************/ - -/*====== Helper functions ======*/ + * Return: The maximum compressed size in the worst case scenario. + */ +size_t zstd_compress_bound(size_t src_size); /** - * enum ZSTD_ErrorCode - zstd error codes + * zstd_is_error() - tells if a size_t function result is an error code + * @code: The function result to check for error. * - * Functions that return size_t can be checked for errors using ZSTD_isError() - * and the ZSTD_ErrorCode can be extracted using ZSTD_getErrorCode(). + * Return: Non-zero iff the code is an error. + */ +unsigned int zstd_is_error(size_t code); + +/** + * enum zstd_error_code - zstd error codes */ -typedef enum { - ZSTD_error_no_error, - ZSTD_error_GENERIC, - ZSTD_error_prefix_unknown, - ZSTD_error_version_unsupported, - ZSTD_error_parameter_unknown, - ZSTD_error_frameParameter_unsupported, - ZSTD_error_frameParameter_unsupportedBy32bits, - ZSTD_error_frameParameter_windowTooLarge, - ZSTD_error_compressionParameter_unsupported, - ZSTD_error_init_missing, - ZSTD_error_memory_allocation, - ZSTD_error_stage_wrong, - ZSTD_error_dstSize_tooSmall, - ZSTD_error_srcSize_wrong, - ZSTD_error_corruption_detected, - ZSTD_error_checksum_wrong, - ZSTD_error_tableLog_tooLarge, - ZSTD_error_maxSymbolValue_tooLarge, - ZSTD_error_maxSymbolValue_tooSmall, - ZSTD_error_dictionary_corrupted, - ZSTD_error_dictionary_wrong, - ZSTD_error_dictionaryCreation_failed, - ZSTD_error_maxCode -} ZSTD_ErrorCode; +typedef ZSTD_ErrorCode zstd_error_code; /** - * ZSTD_maxCLevel() - maximum compression level available + * zstd_get_error_code() - translates an error function result to an error code + * @code: The function result for which zstd_is_error(code) is true. * - * Return: Maximum compression level available. + * Return: A unique error code for this error. */ -int ZSTD_maxCLevel(void); +zstd_error_code zstd_get_error_code(size_t code); + /** - * ZSTD_compressBound() - maximum compressed size in worst case scenario - * @srcSize: The size of the data to compress. + * zstd_get_error_name() - translates an error function result to a string + * @code: The function result for which zstd_is_error(code) is true. * - * Return: The maximum compressed size in the worst case scenario. + * Return: An error string corresponding to the error code. */ -size_t ZSTD_compressBound(size_t srcSize); +const char *zstd_get_error_name(size_t code); + /** - * ZSTD_isError() - tells if a size_t function result is an error code - * @code: The function result to check for error. + * zstd_min_clevel() - minimum allowed compression level * - * Return: Non-zero iff the code is an error. + * Return: The minimum allowed compression level. */ -static __attribute__((unused)) unsigned int ZSTD_isError(size_t code) -{ - return code > (size_t)-ZSTD_error_maxCode; -} +int zstd_min_clevel(void); + /** - * ZSTD_getErrorCode() - translates an error function result to a ZSTD_ErrorCode - * @functionResult: The result of a function for which ZSTD_isError() is true. + * zstd_max_clevel() - maximum allowed compression level * - * Return: The ZSTD_ErrorCode corresponding to the functionResult or 0 - * if the functionResult isn't an error. + * Return: The maximum allowed compression level. */ -static __attribute__((unused)) ZSTD_ErrorCode ZSTD_getErrorCode( - size_t functionResult) -{ - if (!ZSTD_isError(functionResult)) - return (ZSTD_ErrorCode)0; - return (ZSTD_ErrorCode)(0 - functionResult); -} +int zstd_max_clevel(void); + +/* ====== Parameter Selection ====== */ /** - * enum ZSTD_strategy - zstd compression search strategy + * enum zstd_strategy - zstd compression search strategy * - * From faster to stronger. + * From faster to stronger. See zstd_lib.h. */ -typedef enum { - ZSTD_fast, - ZSTD_dfast, - ZSTD_greedy, - ZSTD_lazy, - ZSTD_lazy2, - ZSTD_btlazy2, - ZSTD_btopt, - ZSTD_btopt2 -} ZSTD_strategy; +typedef ZSTD_strategy zstd_strategy; /** - * struct ZSTD_compressionParameters - zstd compression parameters + * struct zstd_compression_parameters - zstd compression parameters * @windowLog: Log of the largest match distance. Larger means more * compression, and more memory needed during decompression. - * @chainLog: Fully searched segment. Larger means more compression, slower, - * and more memory (useless for fast). + * @chainLog: Fully searched segment. Larger means more compression, + * slower, and more memory (useless for fast). * @hashLog: Dispatch table. Larger means more compression, * slower, and more memory. * @searchLog: Number of searches. Larger means more compression and slower. @@ -141,1017 +100,348 @@ typedef enum { * @targetLength: Acceptable match size for optimal parser (only). Larger means * more compression, and slower. * @strategy: The zstd compression strategy. + * + * See zstd_lib.h. */ -typedef struct { - unsigned int windowLog; - unsigned int chainLog; - unsigned int hashLog; - unsigned int searchLog; - unsigned int searchLength; - unsigned int targetLength; - ZSTD_strategy strategy; -} ZSTD_compressionParameters; +typedef ZSTD_compressionParameters zstd_compression_parameters; /** - * struct ZSTD_frameParameters - zstd frame parameters - * @contentSizeFlag: Controls whether content size will be present in the frame - * header (when known). - * @checksumFlag: Controls whether a 32-bit checksum is generated at the end - * of the frame for error detection. - * @noDictIDFlag: Controls whether dictID will be saved into the frame header - * when using dictionary compression. + * struct zstd_frame_parameters - zstd frame parameters + * @contentSizeFlag: Controls whether content size will be present in the + * frame header (when known). + * @checksumFlag: Controls whether a 32-bit checksum is generated at the + * end of the frame for error detection. + * @noDictIDFlag: Controls whether dictID will be saved into the frame + * header when using dictionary compression. * - * The default value is all fields set to 0. + * The default value is all fields set to 0. See zstd_lib.h. */ -typedef struct { - unsigned int contentSizeFlag; - unsigned int checksumFlag; - unsigned int noDictIDFlag; -} ZSTD_frameParameters; +typedef ZSTD_frameParameters zstd_frame_parameters; /** - * struct ZSTD_parameters - zstd parameters + * struct zstd_parameters - zstd parameters * @cParams: The compression parameters. * @fParams: The frame parameters. */ -typedef struct { - ZSTD_compressionParameters cParams; - ZSTD_frameParameters fParams; -} ZSTD_parameters; +typedef ZSTD_parameters zstd_parameters; /** - * ZSTD_getCParams() - returns ZSTD_compressionParameters for selected level - * @compressionLevel: The compression level from 1 to ZSTD_maxCLevel(). - * @estimatedSrcSize: The estimated source size to compress or 0 if unknown. - * @dictSize: The dictionary size or 0 if a dictionary isn't being used. + * zstd_get_params() - returns zstd_parameters for selected level + * @level: The compression level + * @estimated_src_size: The estimated source size to compress or 0 + * if unknown. * - * Return: The selected ZSTD_compressionParameters. + * Return: The selected zstd_parameters. */ -ZSTD_compressionParameters ZSTD_getCParams(int compressionLevel, - unsigned long long estimatedSrcSize, size_t dictSize); +zstd_parameters zstd_get_params(int level, + unsigned long long estimated_src_size); -/** - * ZSTD_getParams() - returns ZSTD_parameters for selected level - * @compressionLevel: The compression level from 1 to ZSTD_maxCLevel(). - * @estimatedSrcSize: The estimated source size to compress or 0 if unknown. - * @dictSize: The dictionary size or 0 if a dictionary isn't being used. - * - * The same as ZSTD_getCParams() except also selects the default frame - * parameters (all zero). - * - * Return: The selected ZSTD_parameters. - */ -ZSTD_parameters ZSTD_getParams(int compressionLevel, - unsigned long long estimatedSrcSize, size_t dictSize); +/* ====== Single-pass Compression ====== */ -/*-************************************* - * Explicit memory management - **************************************/ +typedef ZSTD_CCtx zstd_cctx; /** - * ZSTD_CCtxWorkspaceBound() - amount of memory needed to initialize a ZSTD_CCtx - * @cParams: The compression parameters to be used for compression. + * zstd_cctx_workspace_bound() - max memory needed to initialize a zstd_cctx + * @parameters: The compression parameters to be used. * * If multiple compression parameters might be used, the caller must call - * ZSTD_CCtxWorkspaceBound() for each set of parameters and use the maximum + * zstd_cctx_workspace_bound() for each set of parameters and use the maximum * size. * - * Return: A lower bound on the size of the workspace that is passed to - * ZSTD_initCCtx(). + * Return: A lower bound on the size of the workspace that is passed to + * zstd_init_cctx(). */ -size_t ZSTD_CCtxWorkspaceBound(ZSTD_compressionParameters cParams); +size_t zstd_cctx_workspace_bound(const zstd_compression_parameters *parameters); /** - * struct ZSTD_CCtx - the zstd compression context - * - * When compressing many times it is recommended to allocate a context just once - * and reuse it for each successive compression operation. - */ -typedef struct ZSTD_CCtx_s ZSTD_CCtx; -/** - * ZSTD_initCCtx() - initialize a zstd compression context - * @workspace: The workspace to emplace the context into. It must outlive - * the returned context. - * @workspaceSize: The size of workspace. Use ZSTD_CCtxWorkspaceBound() to - * determine how large the workspace must be. - * - * Return: A compression context emplaced into workspace. - */ -ZSTD_CCtx *ZSTD_initCCtx(void *workspace, size_t workspaceSize); - -/** - * ZSTD_compressCCtx() - compress src into dst - * @ctx: The context. Must have been initialized with a workspace at - * least as large as ZSTD_CCtxWorkspaceBound(params.cParams). - * @dst: The buffer to compress src into. - * @dstCapacity: The size of the destination buffer. May be any size, but - * ZSTD_compressBound(srcSize) is guaranteed to be large enough. - * @src: The data to compress. - * @srcSize: The size of the data to compress. - * @params: The parameters to use for compression. See ZSTD_getParams(). - * - * Return: The compressed size or an error, which can be checked using - * ZSTD_isError(). - */ -size_t ZSTD_compressCCtx(ZSTD_CCtx *ctx, void *dst, size_t dstCapacity, - const void *src, size_t srcSize, ZSTD_parameters params); - -/** - * ZSTD_DCtxWorkspaceBound() - amount of memory needed to initialize a ZSTD_DCtx - * - * Return: A lower bound on the size of the workspace that is passed to - * ZSTD_initDCtx(). - */ -size_t ZSTD_DCtxWorkspaceBound(void); - -/** - * struct ZSTD_DCtx - the zstd decompression context - * - * When decompressing many times it is recommended to allocate a context just - * once and reuse it for each successive decompression operation. - */ -typedef struct ZSTD_DCtx_s ZSTD_DCtx; -/** - * ZSTD_initDCtx() - initialize a zstd decompression context - * @workspace: The workspace to emplace the context into. It must outlive - * the returned context. - * @workspaceSize: The size of workspace. Use ZSTD_DCtxWorkspaceBound() to - * determine how large the workspace must be. - * - * Return: A decompression context emplaced into workspace. - */ -ZSTD_DCtx *ZSTD_initDCtx(void *workspace, size_t workspaceSize); - -/** - * ZSTD_decompressDCtx() - decompress zstd compressed src into dst - * @ctx: The decompression context. - * @dst: The buffer to decompress src into. - * @dstCapacity: The size of the destination buffer. Must be at least as large - * as the decompressed size. If the caller cannot upper bound the - * decompressed size, then it's better to use the streaming API. - * @src: The zstd compressed data to decompress. Multiple concatenated - * frames and skippable frames are allowed. - * @srcSize: The exact size of the data to decompress. - * - * Return: The decompressed size or an error, which can be checked using - * ZSTD_isError(). - */ -size_t ZSTD_decompressDCtx(ZSTD_DCtx *ctx, void *dst, size_t dstCapacity, - const void *src, size_t srcSize); - -/*-************************ - * Simple dictionary API - **************************/ - -/** - * ZSTD_compress_usingDict() - compress src into dst using a dictionary - * @ctx: The context. Must have been initialized with a workspace at - * least as large as ZSTD_CCtxWorkspaceBound(params.cParams). - * @dst: The buffer to compress src into. - * @dstCapacity: The size of the destination buffer. May be any size, but - * ZSTD_compressBound(srcSize) is guaranteed to be large enough. - * @src: The data to compress. - * @srcSize: The size of the data to compress. - * @dict: The dictionary to use for compression. - * @dictSize: The size of the dictionary. - * @params: The parameters to use for compression. See ZSTD_getParams(). - * - * Compression using a predefined dictionary. The same dictionary must be used - * during decompression. - * - * Return: The compressed size or an error, which can be checked using - * ZSTD_isError(). - */ -size_t ZSTD_compress_usingDict(ZSTD_CCtx *ctx, void *dst, size_t dstCapacity, - const void *src, size_t srcSize, const void *dict, size_t dictSize, - ZSTD_parameters params); - -/** - * ZSTD_decompress_usingDict() - decompress src into dst using a dictionary - * @ctx: The decompression context. - * @dst: The buffer to decompress src into. - * @dstCapacity: The size of the destination buffer. Must be at least as large - * as the decompressed size. If the caller cannot upper bound the - * decompressed size, then it's better to use the streaming API. - * @src: The zstd compressed data to decompress. Multiple concatenated - * frames and skippable frames are allowed. - * @srcSize: The exact size of the data to decompress. - * @dict: The dictionary to use for decompression. The same dictionary - * must've been used to compress the data. - * @dictSize: The size of the dictionary. - * - * Return: The decompressed size or an error, which can be checked using - * ZSTD_isError(). - */ -size_t ZSTD_decompress_usingDict(ZSTD_DCtx *ctx, void *dst, size_t dstCapacity, - const void *src, size_t srcSize, const void *dict, size_t dictSize); - -/*-************************** - * Fast dictionary API - ***************************/ - -/** - * ZSTD_CDictWorkspaceBound() - memory needed to initialize a ZSTD_CDict - * @cParams: The compression parameters to be used for compression. + * zstd_init_cctx() - initialize a zstd compression context + * @workspace: The workspace to emplace the context into. It must outlive + * the returned context. + * @workspace_size: The size of workspace. Use zstd_cctx_workspace_bound() to + * determine how large the workspace must be. * - * Return: A lower bound on the size of the workspace that is passed to - * ZSTD_initCDict(). - */ -size_t ZSTD_CDictWorkspaceBound(ZSTD_compressionParameters cParams); - -/** - * struct ZSTD_CDict - a digested dictionary to be used for compression + * Return: A zstd compression context or NULL on error. */ -typedef struct ZSTD_CDict_s ZSTD_CDict; +zstd_cctx *zstd_init_cctx(void *workspace, size_t workspace_size); /** - * ZSTD_initCDict() - initialize a digested dictionary for compression - * @dictBuffer: The dictionary to digest. The buffer is referenced by the - * ZSTD_CDict so it must outlive the returned ZSTD_CDict. - * @dictSize: The size of the dictionary. - * @params: The parameters to use for compression. See ZSTD_getParams(). - * @workspace: The workspace. It must outlive the returned ZSTD_CDict. - * @workspaceSize: The workspace size. Must be at least - * ZSTD_CDictWorkspaceBound(params.cParams). + * zstd_compress_cctx() - compress src into dst with the initialized parameters + * @cctx: The context. Must have been initialized with zstd_init_cctx(). + * @dst: The buffer to compress src into. + * @dst_capacity: The size of the destination buffer. May be any size, but + * ZSTD_compressBound(srcSize) is guaranteed to be large enough. + * @src: The data to compress. + * @src_size: The size of the data to compress. + * @parameters: The compression parameters to be used. * - * When compressing multiple messages / blocks with the same dictionary it is - * recommended to load it just once. The ZSTD_CDict merely references the - * dictBuffer, so it must outlive the returned ZSTD_CDict. - * - * Return: The digested dictionary emplaced into workspace. + * Return: The compressed size or an error, which can be checked using + * zstd_is_error(). */ -ZSTD_CDict *ZSTD_initCDict(const void *dictBuffer, size_t dictSize, - ZSTD_parameters params, void *workspace, size_t workspaceSize); +size_t zstd_compress_cctx(zstd_cctx *cctx, void *dst, size_t dst_capacity, + const void *src, size_t src_size, const zstd_parameters *parameters); -/** - * ZSTD_compress_usingCDict() - compress src into dst using a ZSTD_CDict - * @ctx: The context. Must have been initialized with a workspace at - * least as large as ZSTD_CCtxWorkspaceBound(cParams) where - * cParams are the compression parameters used to initialize the - * cdict. - * @dst: The buffer to compress src into. - * @dstCapacity: The size of the destination buffer. May be any size, but - * ZSTD_compressBound(srcSize) is guaranteed to be large enough. - * @src: The data to compress. - * @srcSize: The size of the data to compress. - * @cdict: The digested dictionary to use for compression. - * @params: The parameters to use for compression. See ZSTD_getParams(). - * - * Compression using a digested dictionary. The same dictionary must be used - * during decompression. - * - * Return: The compressed size or an error, which can be checked using - * ZSTD_isError(). - */ -size_t ZSTD_compress_usingCDict(ZSTD_CCtx *cctx, void *dst, size_t dstCapacity, - const void *src, size_t srcSize, const ZSTD_CDict *cdict); +/* ====== Single-pass Decompression ====== */ +typedef ZSTD_DCtx zstd_dctx; /** - * ZSTD_DDictWorkspaceBound() - memory needed to initialize a ZSTD_DDict + * zstd_dctx_workspace_bound() - max memory needed to initialize a zstd_dctx * - * Return: A lower bound on the size of the workspace that is passed to - * ZSTD_initDDict(). - */ -size_t ZSTD_DDictWorkspaceBound(void); - -/** - * struct ZSTD_DDict - a digested dictionary to be used for decompression + * Return: A lower bound on the size of the workspace that is passed to + * zstd_init_dctx(). */ -typedef struct ZSTD_DDict_s ZSTD_DDict; +size_t zstd_dctx_workspace_bound(void); /** - * ZSTD_initDDict() - initialize a digested dictionary for decompression - * @dictBuffer: The dictionary to digest. The buffer is referenced by the - * ZSTD_DDict so it must outlive the returned ZSTD_DDict. - * @dictSize: The size of the dictionary. - * @workspace: The workspace. It must outlive the returned ZSTD_DDict. - * @workspaceSize: The workspace size. Must be at least - * ZSTD_DDictWorkspaceBound(). - * - * When decompressing multiple messages / blocks with the same dictionary it is - * recommended to load it just once. The ZSTD_DDict merely references the - * dictBuffer, so it must outlive the returned ZSTD_DDict. + * zstd_init_dctx() - initialize a zstd decompression context + * @workspace: The workspace to emplace the context into. It must outlive + * the returned context. + * @workspace_size: The size of workspace. Use zstd_dctx_workspace_bound() to + * determine how large the workspace must be. * - * Return: The digested dictionary emplaced into workspace. + * Return: A zstd decompression context or NULL on error. */ -ZSTD_DDict *ZSTD_initDDict(const void *dictBuffer, size_t dictSize, - void *workspace, size_t workspaceSize); +zstd_dctx *zstd_init_dctx(void *workspace, size_t workspace_size); /** - * ZSTD_decompress_usingDDict() - decompress src into dst using a ZSTD_DDict - * @ctx: The decompression context. - * @dst: The buffer to decompress src into. - * @dstCapacity: The size of the destination buffer. Must be at least as large - * as the decompressed size. If the caller cannot upper bound the - * decompressed size, then it's better to use the streaming API. - * @src: The zstd compressed data to decompress. Multiple concatenated - * frames and skippable frames are allowed. - * @srcSize: The exact size of the data to decompress. - * @ddict: The digested dictionary to use for decompression. The same - * dictionary must've been used to compress the data. + * zstd_decompress_dctx() - decompress zstd compressed src into dst + * @dctx: The decompression context. + * @dst: The buffer to decompress src into. + * @dst_capacity: The size of the destination buffer. Must be at least as large + * as the decompressed size. If the caller cannot upper bound the + * decompressed size, then it's better to use the streaming API. + * @src: The zstd compressed data to decompress. Multiple concatenated + * frames and skippable frames are allowed. + * @src_size: The exact size of the data to decompress. * - * Return: The decompressed size or an error, which can be checked using - * ZSTD_isError(). + * Return: The decompressed size or an error, which can be checked using + * zstd_is_error(). */ -size_t ZSTD_decompress_usingDDict(ZSTD_DCtx *dctx, void *dst, - size_t dstCapacity, const void *src, size_t srcSize, - const ZSTD_DDict *ddict); +size_t zstd_decompress_dctx(zstd_dctx *dctx, void *dst, size_t dst_capacity, + const void *src, size_t src_size); - -/*-************************** - * Streaming - ***************************/ +/* ====== Streaming Buffers ====== */ /** - * struct ZSTD_inBuffer - input buffer for streaming + * struct zstd_in_buffer - input buffer for streaming * @src: Start of the input buffer. * @size: Size of the input buffer. * @pos: Position where reading stopped. Will be updated. * Necessarily 0 <= pos <= size. + * + * See zstd_lib.h. */ -typedef struct ZSTD_inBuffer_s { - const void *src; - size_t size; - size_t pos; -} ZSTD_inBuffer; +typedef ZSTD_inBuffer zstd_in_buffer; /** - * struct ZSTD_outBuffer - output buffer for streaming + * struct zstd_out_buffer - output buffer for streaming * @dst: Start of the output buffer. * @size: Size of the output buffer. * @pos: Position where writing stopped. Will be updated. * Necessarily 0 <= pos <= size. + * + * See zstd_lib.h. */ -typedef struct ZSTD_outBuffer_s { - void *dst; - size_t size; - size_t pos; -} ZSTD_outBuffer; +typedef ZSTD_outBuffer zstd_out_buffer; +/* ====== Streaming Compression ====== */ - -/*-***************************************************************************** - * Streaming compression - HowTo - * - * A ZSTD_CStream object is required to track streaming operation. - * Use ZSTD_initCStream() to initialize a ZSTD_CStream object. - * ZSTD_CStream objects can be reused multiple times on consecutive compression - * operations. It is recommended to re-use ZSTD_CStream in situations where many - * streaming operations will be achieved consecutively. Use one separate - * ZSTD_CStream per thread for parallel execution. - * - * Use ZSTD_compressStream() repetitively to consume input stream. - * The function will automatically update both `pos` fields. - * Note that it may not consume the entire input, in which case `pos < size`, - * and it's up to the caller to present again remaining data. - * It returns a hint for the preferred number of bytes to use as an input for - * the next function call. - * - * At any moment, it's possible to flush whatever data remains within internal - * buffer, using ZSTD_flushStream(). `output->pos` will be updated. There might - * still be some content left within the internal buffer if `output->size` is - * too small. It returns the number of bytes left in the internal buffer and - * must be called until it returns 0. - * - * ZSTD_endStream() instructs to finish a frame. It will perform a flush and - * write frame epilogue. The epilogue is required for decoders to consider a - * frame completed. Similar to ZSTD_flushStream(), it may not be able to flush - * the full content if `output->size` is too small. In which case, call again - * ZSTD_endStream() to complete the flush. It returns the number of bytes left - * in the internal buffer and must be called until it returns 0. - ******************************************************************************/ +typedef ZSTD_CStream zstd_cstream; /** - * ZSTD_CStreamWorkspaceBound() - memory needed to initialize a ZSTD_CStream - * @cParams: The compression parameters to be used for compression. + * zstd_cstream_workspace_bound() - memory needed to initialize a zstd_cstream + * @cparams: The compression parameters to be used for compression. * * Return: A lower bound on the size of the workspace that is passed to - * ZSTD_initCStream() and ZSTD_initCStream_usingCDict(). - */ -size_t ZSTD_CStreamWorkspaceBound(ZSTD_compressionParameters cParams); - -/** - * struct ZSTD_CStream - the zstd streaming compression context - */ -typedef struct ZSTD_CStream_s ZSTD_CStream; - -/*===== ZSTD_CStream management functions =====*/ -/** - * ZSTD_initCStream() - initialize a zstd streaming compression context - * @params: The zstd compression parameters. - * @pledgedSrcSize: If params.fParams.contentSizeFlag == 1 then the caller must - * pass the source size (zero means empty source). Otherwise, - * the caller may optionally pass the source size, or zero if - * unknown. - * @workspace: The workspace to emplace the context into. It must outlive - * the returned context. - * @workspaceSize: The size of workspace. - * Use ZSTD_CStreamWorkspaceBound(params.cParams) to determine - * how large the workspace must be. - * - * Return: The zstd streaming compression context. + * zstd_init_cstream(). */ -ZSTD_CStream *ZSTD_initCStream(ZSTD_parameters params, - unsigned long long pledgedSrcSize, void *workspace, - size_t workspaceSize); +size_t zstd_cstream_workspace_bound(const zstd_compression_parameters *cparams); /** - * ZSTD_initCStream_usingCDict() - initialize a streaming compression context - * @cdict: The digested dictionary to use for compression. - * @pledgedSrcSize: Optionally the source size, or zero if unknown. - * @workspace: The workspace to emplace the context into. It must outlive - * the returned context. - * @workspaceSize: The size of workspace. Call ZSTD_CStreamWorkspaceBound() - * with the cParams used to initialize the cdict to determine - * how large the workspace must be. + * zstd_init_cstream() - initialize a zstd streaming compression context + * @parameters The zstd parameters to use for compression. + * @pledged_src_size: If params.fParams.contentSizeFlag == 1 then the caller + * must pass the source size (zero means empty source). + * Otherwise, the caller may optionally pass the source + * size, or zero if unknown. + * @workspace: The workspace to emplace the context into. It must outlive + * the returned context. + * @workspace_size: The size of workspace. + * Use zstd_cstream_workspace_bound(params->cparams) to + * determine how large the workspace must be. * - * Return: The zstd streaming compression context. + * Return: The zstd streaming compression context or NULL on error. */ -ZSTD_CStream *ZSTD_initCStream_usingCDict(const ZSTD_CDict *cdict, - unsigned long long pledgedSrcSize, void *workspace, - size_t workspaceSize); +zstd_cstream *zstd_init_cstream(const zstd_parameters *parameters, + unsigned long long pledged_src_size, void *workspace, size_t workspace_size); -/*===== Streaming compression functions =====*/ /** - * ZSTD_resetCStream() - reset the context using parameters from creation - * @zcs: The zstd streaming compression context to reset. - * @pledgedSrcSize: Optionally the source size, or zero if unknown. + * zstd_reset_cstream() - reset the context using parameters from creation + * @cstream: The zstd streaming compression context to reset. + * @pledged_src_size: Optionally the source size, or zero if unknown. * * Resets the context using the parameters from creation. Skips dictionary - * loading, since it can be reused. If `pledgedSrcSize` is non-zero the frame + * loading, since it can be reused. If `pledged_src_size` is non-zero the frame * content size is always written into the frame header. * - * Return: Zero or an error, which can be checked using ZSTD_isError(). + * Return: Zero or an error, which can be checked using + * zstd_is_error(). */ -size_t ZSTD_resetCStream(ZSTD_CStream *zcs, unsigned long long pledgedSrcSize); +size_t zstd_reset_cstream(zstd_cstream *cstream, + unsigned long long pledged_src_size); + /** - * ZSTD_compressStream() - streaming compress some of input into output - * @zcs: The zstd streaming compression context. - * @output: Destination buffer. `output->pos` is updated to indicate how much - * compressed data was written. - * @input: Source buffer. `input->pos` is updated to indicate how much data was - * read. Note that it may not consume the entire input, in which case - * `input->pos < input->size`, and it's up to the caller to present - * remaining data again. + * zstd_compress_stream() - streaming compress some of input into output + * @cstream: The zstd streaming compression context. + * @output: Destination buffer. `output->pos` is updated to indicate how much + * compressed data was written. + * @input: Source buffer. `input->pos` is updated to indicate how much data + * was read. Note that it may not consume the entire input, in which + * case `input->pos < input->size`, and it's up to the caller to + * present remaining data again. * * The `input` and `output` buffers may be any size. Guaranteed to make some * forward progress if `input` and `output` are not empty. * - * Return: A hint for the number of bytes to use as the input for the next - * function call or an error, which can be checked using - * ZSTD_isError(). + * Return: A hint for the number of bytes to use as the input for the next + * function call or an error, which can be checked using + * zstd_is_error(). */ -size_t ZSTD_compressStream(ZSTD_CStream *zcs, ZSTD_outBuffer *output, - ZSTD_inBuffer *input); +size_t zstd_compress_stream(zstd_cstream *cstream, zstd_out_buffer *output, + zstd_in_buffer *input); + /** - * ZSTD_flushStream() - flush internal buffers into output - * @zcs: The zstd streaming compression context. - * @output: Destination buffer. `output->pos` is updated to indicate how much - * compressed data was written. + * zstd_flush_stream() - flush internal buffers into output + * @cstream: The zstd streaming compression context. + * @output: Destination buffer. `output->pos` is updated to indicate how much + * compressed data was written. * - * ZSTD_flushStream() must be called until it returns 0, meaning all the data - * has been flushed. Since ZSTD_flushStream() causes a block to be ended, + * zstd_flush_stream() must be called until it returns 0, meaning all the data + * has been flushed. Since zstd_flush_stream() causes a block to be ended, * calling it too often will degrade the compression ratio. * - * Return: The number of bytes still present within internal buffers or an - * error, which can be checked using ZSTD_isError(). + * Return: The number of bytes still present within internal buffers or an + * error, which can be checked using zstd_is_error(). */ -size_t ZSTD_flushStream(ZSTD_CStream *zcs, ZSTD_outBuffer *output); -/** - * ZSTD_endStream() - flush internal buffers into output and end the frame - * @zcs: The zstd streaming compression context. - * @output: Destination buffer. `output->pos` is updated to indicate how much - * compressed data was written. - * - * ZSTD_endStream() must be called until it returns 0, meaning all the data has - * been flushed and the frame epilogue has been written. - * - * Return: The number of bytes still present within internal buffers or an - * error, which can be checked using ZSTD_isError(). - */ -size_t ZSTD_endStream(ZSTD_CStream *zcs, ZSTD_outBuffer *output); +size_t zstd_flush_stream(zstd_cstream *cstream, zstd_out_buffer *output); /** - * ZSTD_CStreamInSize() - recommended size for the input buffer - * - * Return: The recommended size for the input buffer. - */ -size_t ZSTD_CStreamInSize(void); -/** - * ZSTD_CStreamOutSize() - recommended size for the output buffer + * zstd_end_stream() - flush internal buffers into output and end the frame + * @cstream: The zstd streaming compression context. + * @output: Destination buffer. `output->pos` is updated to indicate how much + * compressed data was written. * - * When the output buffer is at least this large, it is guaranteed to be large - * enough to flush at least one complete compressed block. + * zstd_end_stream() must be called until it returns 0, meaning all the data has + * been flushed and the frame epilogue has been written. * - * Return: The recommended size for the output buffer. + * Return: The number of bytes still present within internal buffers or an + * error, which can be checked using zstd_is_error(). */ -size_t ZSTD_CStreamOutSize(void); +size_t zstd_end_stream(zstd_cstream *cstream, zstd_out_buffer *output); +/* ====== Streaming Decompression ====== */ - -/*-***************************************************************************** - * Streaming decompression - HowTo - * - * A ZSTD_DStream object is required to track streaming operations. - * Use ZSTD_initDStream() to initialize a ZSTD_DStream object. - * ZSTD_DStream objects can be re-used multiple times. - * - * Use ZSTD_decompressStream() repetitively to consume your input. - * The function will update both `pos` fields. - * If `input->pos < input->size`, some input has not been consumed. - * It's up to the caller to present again remaining data. - * If `output->pos < output->size`, decoder has flushed everything it could. - * Returns 0 iff a frame is completely decoded and fully flushed. - * Otherwise it returns a suggested next input size that will never load more - * than the current frame. - ******************************************************************************/ +typedef ZSTD_DStream zstd_dstream; /** - * ZSTD_DStreamWorkspaceBound() - memory needed to initialize a ZSTD_DStream - * @maxWindowSize: The maximum window size allowed for compressed frames. + * zstd_dstream_workspace_bound() - memory needed to initialize a zstd_dstream + * @max_window_size: The maximum window size allowed for compressed frames. * - * Return: A lower bound on the size of the workspace that is passed to - * ZSTD_initDStream() and ZSTD_initDStream_usingDDict(). + * Return: A lower bound on the size of the workspace that is passed + * to zstd_init_dstream(). */ -size_t ZSTD_DStreamWorkspaceBound(size_t maxWindowSize); +size_t zstd_dstream_workspace_bound(size_t max_window_size); /** - * struct ZSTD_DStream - the zstd streaming decompression context - */ -typedef struct ZSTD_DStream_s ZSTD_DStream; -/*===== ZSTD_DStream management functions =====*/ -/** - * ZSTD_initDStream() - initialize a zstd streaming decompression context - * @maxWindowSize: The maximum window size allowed for compressed frames. - * @workspace: The workspace to emplace the context into. It must outlive - * the returned context. - * @workspaceSize: The size of workspace. - * Use ZSTD_DStreamWorkspaceBound(maxWindowSize) to determine - * how large the workspace must be. - * - * Return: The zstd streaming decompression context. - */ -ZSTD_DStream *ZSTD_initDStream(size_t maxWindowSize, void *workspace, - size_t workspaceSize); -/** - * ZSTD_initDStream_usingDDict() - initialize streaming decompression context - * @maxWindowSize: The maximum window size allowed for compressed frames. - * @ddict: The digested dictionary to use for decompression. - * @workspace: The workspace to emplace the context into. It must outlive - * the returned context. - * @workspaceSize: The size of workspace. - * Use ZSTD_DStreamWorkspaceBound(maxWindowSize) to determine - * how large the workspace must be. + * zstd_init_dstream() - initialize a zstd streaming decompression context + * @max_window_size: The maximum window size allowed for compressed frames. + * @workspace: The workspace to emplace the context into. It must outlive + * the returned context. + * @workspaceSize: The size of workspace. + * Use zstd_dstream_workspace_bound(max_window_size) to + * determine how large the workspace must be. * - * Return: The zstd streaming decompression context. + * Return: The zstd streaming decompression context. */ -ZSTD_DStream *ZSTD_initDStream_usingDDict(size_t maxWindowSize, - const ZSTD_DDict *ddict, void *workspace, size_t workspaceSize); +zstd_dstream *zstd_init_dstream(size_t max_window_size, void *workspace, + size_t workspace_size); -/*===== Streaming decompression functions =====*/ /** - * ZSTD_resetDStream() - reset the context using parameters from creation - * @zds: The zstd streaming decompression context to reset. + * zstd_reset_dstream() - reset the context using parameters from creation + * @dstream: The zstd streaming decompression context to reset. * * Resets the context using the parameters from creation. Skips dictionary * loading, since it can be reused. * - * Return: Zero or an error, which can be checked using ZSTD_isError(). + * Return: Zero or an error, which can be checked using zstd_is_error(). */ -size_t ZSTD_resetDStream(ZSTD_DStream *zds); +size_t zstd_reset_dstream(zstd_dstream *dstream); + /** - * ZSTD_decompressStream() - streaming decompress some of input into output - * @zds: The zstd streaming decompression context. - * @output: Destination buffer. `output.pos` is updated to indicate how much - * decompressed data was written. - * @input: Source buffer. `input.pos` is updated to indicate how much data was - * read. Note that it may not consume the entire input, in which case - * `input.pos < input.size`, and it's up to the caller to present - * remaining data again. + * zstd_decompress_stream() - streaming decompress some of input into output + * @dstream: The zstd streaming decompression context. + * @output: Destination buffer. `output.pos` is updated to indicate how much + * decompressed data was written. + * @input: Source buffer. `input.pos` is updated to indicate how much data was + * read. Note that it may not consume the entire input, in which case + * `input.pos < input.size`, and it's up to the caller to present + * remaining data again. * * The `input` and `output` buffers may be any size. Guaranteed to make some * forward progress if `input` and `output` are not empty. - * ZSTD_decompressStream() will not consume the last byte of the frame until + * zstd_decompress_stream() will not consume the last byte of the frame until * the entire frame is flushed. * - * Return: Returns 0 iff a frame is completely decoded and fully flushed. - * Otherwise returns a hint for the number of bytes to use as the input - * for the next function call or an error, which can be checked using - * ZSTD_isError(). The size hint will never load more than the frame. + * Return: Returns 0 iff a frame is completely decoded and fully flushed. + * Otherwise returns a hint for the number of bytes to use as the + * input for the next function call or an error, which can be checked + * using zstd_is_error(). The size hint will never load more than the + * frame. */ -size_t ZSTD_decompressStream(ZSTD_DStream *zds, ZSTD_outBuffer *output, - ZSTD_inBuffer *input); +size_t zstd_decompress_stream(zstd_dstream *dstream, zstd_out_buffer *output, + zstd_in_buffer *input); -/** - * ZSTD_DStreamInSize() - recommended size for the input buffer - * - * Return: The recommended size for the input buffer. - */ -size_t ZSTD_DStreamInSize(void); -/** - * ZSTD_DStreamOutSize() - recommended size for the output buffer - * - * When the output buffer is at least this large, it is guaranteed to be large - * enough to flush at least one complete decompressed block. - * - * Return: The recommended size for the output buffer. - */ -size_t ZSTD_DStreamOutSize(void); - - -/* --- Constants ---*/ -#define ZSTD_MAGICNUMBER 0xFD2FB528 /* >= v0.8.0 */ -#define ZSTD_MAGIC_SKIPPABLE_START 0x184D2A50U - -#define ZSTD_CONTENTSIZE_UNKNOWN (0ULL - 1) -#define ZSTD_CONTENTSIZE_ERROR (0ULL - 2) - -#define ZSTD_WINDOWLOG_MAX_32 27 -#define ZSTD_WINDOWLOG_MAX_64 27 -#define ZSTD_WINDOWLOG_MAX \ - ((unsigned int)(sizeof(size_t) == 4 \ - ? ZSTD_WINDOWLOG_MAX_32 \ - : ZSTD_WINDOWLOG_MAX_64)) -#define ZSTD_WINDOWLOG_MIN 10 -#define ZSTD_HASHLOG_MAX ZSTD_WINDOWLOG_MAX -#define ZSTD_HASHLOG_MIN 6 -#define ZSTD_CHAINLOG_MAX (ZSTD_WINDOWLOG_MAX+1) -#define ZSTD_CHAINLOG_MIN ZSTD_HASHLOG_MIN -#define ZSTD_HASHLOG3_MAX 17 -#define ZSTD_SEARCHLOG_MAX (ZSTD_WINDOWLOG_MAX-1) -#define ZSTD_SEARCHLOG_MIN 1 -/* only for ZSTD_fast, other strategies are limited to 6 */ -#define ZSTD_SEARCHLENGTH_MAX 7 -/* only for ZSTD_btopt, other strategies are limited to 4 */ -#define ZSTD_SEARCHLENGTH_MIN 3 -#define ZSTD_TARGETLENGTH_MIN 4 -#define ZSTD_TARGETLENGTH_MAX 999 - -/* for static allocation */ -#define ZSTD_FRAMEHEADERSIZE_MAX 18 -#define ZSTD_FRAMEHEADERSIZE_MIN 6 -#define ZSTD_frameHeaderSize_prefix 5 -#define ZSTD_frameHeaderSize_min ZSTD_FRAMEHEADERSIZE_MIN -#define ZSTD_frameHeaderSize_max ZSTD_FRAMEHEADERSIZE_MAX -/* magic number + skippable frame length */ -#define ZSTD_skippableHeaderSize 8 - - -/*-************************************* - * Compressed size functions - **************************************/ - -/** - * ZSTD_findFrameCompressedSize() - returns the size of a compressed frame - * @src: Source buffer. It should point to the start of a zstd encoded frame - * or a skippable frame. - * @srcSize: The size of the source buffer. It must be at least as large as the - * size of the frame. - * - * Return: The compressed size of the frame pointed to by `src` or an error, - * which can be check with ZSTD_isError(). - * Suitable to pass to ZSTD_decompress() or similar functions. - */ -size_t ZSTD_findFrameCompressedSize(const void *src, size_t srcSize); - -/*-************************************* - * Decompressed size functions - **************************************/ -/** - * ZSTD_getFrameContentSize() - returns the content size in a zstd frame header - * @src: It should point to the start of a zstd encoded frame. - * @srcSize: The size of the source buffer. It must be at least as large as the - * frame header. `ZSTD_frameHeaderSize_max` is always large enough. - * - * Return: The frame content size stored in the frame header if known. - * `ZSTD_CONTENTSIZE_UNKNOWN` if the content size isn't stored in the - * frame header. `ZSTD_CONTENTSIZE_ERROR` on invalid input. - */ -unsigned long long ZSTD_getFrameContentSize(const void *src, size_t srcSize); +/* ====== Frame Inspection Functions ====== */ /** - * ZSTD_findDecompressedSize() - returns decompressed size of a series of frames - * @src: It should point to the start of a series of zstd encoded and/or - * skippable frames. - * @srcSize: The exact size of the series of frames. + * zstd_find_frame_compressed_size() - returns the size of a compressed frame + * @src: Source buffer. It should point to the start of a zstd encoded + * frame or a skippable frame. + * @src_size: The size of the source buffer. It must be at least as large as the + * size of the frame. * - * If any zstd encoded frame in the series doesn't have the frame content size - * set, `ZSTD_CONTENTSIZE_UNKNOWN` is returned. But frame content size is always - * set when using ZSTD_compress(). The decompressed size can be very large. - * If the source is untrusted, the decompressed size could be wrong or - * intentionally modified. Always ensure the result fits within the - * application's authorized limits. ZSTD_findDecompressedSize() handles multiple - * frames, and so it must traverse the input to read each frame header. This is - * efficient as most of the data is skipped, however it does mean that all frame - * data must be present and valid. - * - * Return: Decompressed size of all the data contained in the frames if known. - * `ZSTD_CONTENTSIZE_UNKNOWN` if the decompressed size is unknown. - * `ZSTD_CONTENTSIZE_ERROR` if an error occurred. - */ -unsigned long long ZSTD_findDecompressedSize(const void *src, size_t srcSize); - -/*-************************************* - * Advanced compression functions - **************************************/ -/** - * ZSTD_checkCParams() - ensure parameter values remain within authorized range - * @cParams: The zstd compression parameters. - * - * Return: Zero or an error, which can be checked using ZSTD_isError(). + * Return: The compressed size of the frame pointed to by `src` or an error, + * which can be check with zstd_is_error(). + * Suitable to pass to ZSTD_decompress() or similar functions. */ -size_t ZSTD_checkCParams(ZSTD_compressionParameters cParams); +size_t zstd_find_frame_compressed_size(const void *src, size_t src_size); /** - * ZSTD_adjustCParams() - optimize parameters for a given srcSize and dictSize - * @srcSize: Optionally the estimated source size, or zero if unknown. - * @dictSize: Optionally the estimated dictionary size, or zero if unknown. - * - * Return: The optimized parameters. - */ -ZSTD_compressionParameters ZSTD_adjustCParams( - ZSTD_compressionParameters cParams, unsigned long long srcSize, - size_t dictSize); - -/*--- Advanced decompression functions ---*/ - -/** - * ZSTD_isFrame() - returns true iff the buffer starts with a valid frame - * @buffer: The source buffer to check. - * @size: The size of the source buffer, must be at least 4 bytes. - * - * Return: True iff the buffer starts with a zstd or skippable frame identifier. - */ -unsigned int ZSTD_isFrame(const void *buffer, size_t size); - -/** - * ZSTD_getDictID_fromDict() - returns the dictionary id stored in a dictionary - * @dict: The dictionary buffer. - * @dictSize: The size of the dictionary buffer. - * - * Return: The dictionary id stored within the dictionary or 0 if the - * dictionary is not a zstd dictionary. If it returns 0 the - * dictionary can still be loaded as a content-only dictionary. - */ -unsigned int ZSTD_getDictID_fromDict(const void *dict, size_t dictSize); - -/** - * ZSTD_getDictID_fromDDict() - returns the dictionary id stored in a ZSTD_DDict - * @ddict: The ddict to find the id of. - * - * Return: The dictionary id stored within `ddict` or 0 if the dictionary is not - * a zstd dictionary. If it returns 0 `ddict` will be loaded as a - * content-only dictionary. - */ -unsigned int ZSTD_getDictID_fromDDict(const ZSTD_DDict *ddict); - -/** - * ZSTD_getDictID_fromFrame() - returns the dictionary id stored in a zstd frame - * @src: Source buffer. It must be a zstd encoded frame. - * @srcSize: The size of the source buffer. It must be at least as large as the - * frame header. `ZSTD_frameHeaderSize_max` is always large enough. - * - * Return: The dictionary id required to decompress the frame stored within - * `src` or 0 if the dictionary id could not be decoded. It can return - * 0 if the frame does not require a dictionary, the dictionary id - * wasn't stored in the frame, `src` is not a zstd frame, or `srcSize` - * is too small. - */ -unsigned int ZSTD_getDictID_fromFrame(const void *src, size_t srcSize); - -/** - * struct ZSTD_frameParams - zstd frame parameters stored in the frame header - * @frameContentSize: The frame content size, or 0 if not present. + * struct zstd_frame_params - zstd frame parameters stored in the frame header + * @frameContentSize: The frame content size, or ZSTD_CONTENTSIZE_UNKNOWN if not + * present. * @windowSize: The window size, or 0 if the frame is a skippable frame. + * @blockSizeMax: The maximum block size. + * @frameType: The frame type (zstd or skippable) + * @headerSize: The size of the frame header. * @dictID: The dictionary id, or 0 if not present. * @checksumFlag: Whether a checksum was used. + * + * See zstd_lib.h. */ -typedef struct { - unsigned long long frameContentSize; - unsigned int windowSize; - unsigned int dictID; - unsigned int checksumFlag; -} ZSTD_frameParams; +typedef ZSTD_frameHeader zstd_frame_header; /** - * ZSTD_getFrameParams() - extracts parameters from a zstd or skippable frame - * @fparamsPtr: On success the frame parameters are written here. - * @src: The source buffer. It must point to a zstd or skippable frame. - * @srcSize: The size of the source buffer. `ZSTD_frameHeaderSize_max` is - * always large enough to succeed. + * zstd_get_frame_header() - extracts parameters from a zstd or skippable frame + * @params: On success the frame parameters are written here. + * @src: The source buffer. It must point to a zstd or skippable frame. + * @src_size: The size of the source buffer. * - * Return: 0 on success. If more data is required it returns how many bytes - * must be provided to make forward progress. Otherwise it returns - * an error, which can be checked using ZSTD_isError(). + * Return: 0 on success. If more data is required it returns how many bytes + * must be provided to make forward progress. Otherwise it returns + * an error, which can be checked using zstd_is_error(). */ -size_t ZSTD_getFrameParams(ZSTD_frameParams *fparamsPtr, const void *src, - size_t srcSize); - -/*-***************************************************************************** - * Buffer-less and synchronous inner streaming functions - * - * This is an advanced API, giving full control over buffer management, for - * users which need direct control over memory. - * But it's also a complex one, with many restrictions (documented below). - * Prefer using normal streaming API for an easier experience - ******************************************************************************/ - -/*-***************************************************************************** - * Buffer-less streaming compression (synchronous mode) - * - * A ZSTD_CCtx object is required to track streaming operations. - * Use ZSTD_initCCtx() to initialize a context. - * ZSTD_CCtx object can be re-used multiple times within successive compression - * operations. - * - * Start by initializing a context. - * Use ZSTD_compressBegin(), or ZSTD_compressBegin_usingDict() for dictionary - * compression, - * or ZSTD_compressBegin_advanced(), for finer parameter control. - * It's also possible to duplicate a reference context which has already been - * initialized, using ZSTD_copyCCtx() - * - * Then, consume your input using ZSTD_compressContinue(). - * There are some important considerations to keep in mind when using this - * advanced function : - * - ZSTD_compressContinue() has no internal buffer. It uses externally provided - * buffer only. - * - Interface is synchronous : input is consumed entirely and produce 1+ - * (or more) compressed blocks. - * - Caller must ensure there is enough space in `dst` to store compressed data - * under worst case scenario. Worst case evaluation is provided by - * ZSTD_compressBound(). - * ZSTD_compressContinue() doesn't guarantee recover after a failed - * compression. - * - ZSTD_compressContinue() presumes prior input ***is still accessible and - * unmodified*** (up to maximum distance size, see WindowLog). - * It remembers all previous contiguous blocks, plus one separated memory - * segment (which can itself consists of multiple contiguous blocks) - * - ZSTD_compressContinue() detects that prior input has been overwritten when - * `src` buffer overlaps. In which case, it will "discard" the relevant memory - * section from its history. - * - * Finish a frame with ZSTD_compressEnd(), which will write the last block(s) - * and optional checksum. It's possible to use srcSize==0, in which case, it - * will write a final empty block to end the frame. Without last block mark, - * frames will be considered unfinished (corrupted) by decoders. - * - * `ZSTD_CCtx` object can be re-used (ZSTD_compressBegin()) to compress some new - * frame. - ******************************************************************************/ - -/*===== Buffer-less streaming compression functions =====*/ -size_t ZSTD_compressBegin(ZSTD_CCtx *cctx, int compressionLevel); -size_t ZSTD_compressBegin_usingDict(ZSTD_CCtx *cctx, const void *dict, - size_t dictSize, int compressionLevel); -size_t ZSTD_compressBegin_advanced(ZSTD_CCtx *cctx, const void *dict, - size_t dictSize, ZSTD_parameters params, - unsigned long long pledgedSrcSize); -size_t ZSTD_copyCCtx(ZSTD_CCtx *cctx, const ZSTD_CCtx *preparedCCtx, - unsigned long long pledgedSrcSize); -size_t ZSTD_compressBegin_usingCDict(ZSTD_CCtx *cctx, const ZSTD_CDict *cdict, - unsigned long long pledgedSrcSize); -size_t ZSTD_compressContinue(ZSTD_CCtx *cctx, void *dst, size_t dstCapacity, - const void *src, size_t srcSize); -size_t ZSTD_compressEnd(ZSTD_CCtx *cctx, void *dst, size_t dstCapacity, - const void *src, size_t srcSize); - - - -/*-***************************************************************************** - * Buffer-less streaming decompression (synchronous mode) - * - * A ZSTD_DCtx object is required to track streaming operations. - * Use ZSTD_initDCtx() to initialize a context. - * A ZSTD_DCtx object can be re-used multiple times. - * - * First typical operation is to retrieve frame parameters, using - * ZSTD_getFrameParams(). It fills a ZSTD_frameParams structure which provide - * important information to correctly decode the frame, such as the minimum - * rolling buffer size to allocate to decompress data (`windowSize`), and the - * dictionary ID used. - * Note: content size is optional, it may not be present. 0 means unknown. - * Note that these values could be wrong, either because of data malformation, - * or because an attacker is spoofing deliberate false information. As a - * consequence, check that values remain within valid application range, - * especially `windowSize`, before allocation. Each application can set its own - * limit, depending on local restrictions. For extended interoperability, it is - * recommended to support at least 8 MB. - * Frame parameters are extracted from the beginning of the compressed frame. - * Data fragment must be large enough to ensure successful decoding, typically - * `ZSTD_frameHeaderSize_max` bytes. - * Result: 0: successful decoding, the `ZSTD_frameParams` structure is filled. - * >0: `srcSize` is too small, provide at least this many bytes. - * errorCode, which can be tested using ZSTD_isError(). - * - * Start decompression, with ZSTD_decompressBegin() or - * ZSTD_decompressBegin_usingDict(). Alternatively, you can copy a prepared - * context, using ZSTD_copyDCtx(). - * - * Then use ZSTD_nextSrcSizeToDecompress() and ZSTD_decompressContinue() - * alternatively. - * ZSTD_nextSrcSizeToDecompress() tells how many bytes to provide as 'srcSize' - * to ZSTD_decompressContinue(). - * ZSTD_decompressContinue() requires this _exact_ amount of bytes, or it will - * fail. - * - * The result of ZSTD_decompressContinue() is the number of bytes regenerated - * within 'dst' (necessarily <= dstCapacity). It can be zero, which is not an - * error; it just means ZSTD_decompressContinue() has decoded some metadata - * item. It can also be an error code, which can be tested with ZSTD_isError(). - * - * ZSTD_decompressContinue() needs previous data blocks during decompression, up - * to `windowSize`. They should preferably be located contiguously, prior to - * current block. Alternatively, a round buffer of sufficient size is also - * possible. Sufficient size is determined by frame parameters. - * ZSTD_decompressContinue() is very sensitive to contiguity, if 2 blocks don't - * follow each other, make sure that either the compressor breaks contiguity at - * the same place, or that previous contiguous segment is large enough to - * properly handle maximum back-reference. - * - * A frame is fully decoded when ZSTD_nextSrcSizeToDecompress() returns zero. - * Context can then be reset to start a new decompression. - * - * Note: it's possible to know if next input to present is a header or a block, - * using ZSTD_nextInputType(). This information is not required to properly - * decode a frame. - * - * == Special case: skippable frames == - * - * Skippable frames allow integration of user-defined data into a flow of - * concatenated frames. Skippable frames will be ignored (skipped) by a - * decompressor. The format of skippable frames is as follows: - * a) Skippable frame ID - 4 Bytes, Little endian format, any value from - * 0x184D2A50 to 0x184D2A5F - * b) Frame Size - 4 Bytes, Little endian format, unsigned 32-bits - * c) Frame Content - any content (User Data) of length equal to Frame Size - * For skippable frames ZSTD_decompressContinue() always returns 0. - * For skippable frames ZSTD_getFrameParams() returns fparamsPtr->windowLog==0 - * what means that a frame is skippable. - * Note: If fparamsPtr->frameContentSize==0, it is ambiguous: the frame might - * actually be a zstd encoded frame with no content. For purposes of - * decompression, it is valid in both cases to skip the frame using - * ZSTD_findFrameCompressedSize() to find its size in bytes. - * It also returns frame size as fparamsPtr->frameContentSize. - ******************************************************************************/ - -/*===== Buffer-less streaming decompression functions =====*/ -size_t ZSTD_decompressBegin(ZSTD_DCtx *dctx); -size_t ZSTD_decompressBegin_usingDict(ZSTD_DCtx *dctx, const void *dict, - size_t dictSize); -void ZSTD_copyDCtx(ZSTD_DCtx *dctx, const ZSTD_DCtx *preparedDCtx); -size_t ZSTD_nextSrcSizeToDecompress(ZSTD_DCtx *dctx); -size_t ZSTD_decompressContinue(ZSTD_DCtx *dctx, void *dst, size_t dstCapacity, - const void *src, size_t srcSize); -typedef enum { - ZSTDnit_frameHeader, - ZSTDnit_blockHeader, - ZSTDnit_block, - ZSTDnit_lastBlock, - ZSTDnit_checksum, - ZSTDnit_skippableFrame -} ZSTD_nextInputType_e; -ZSTD_nextInputType_e ZSTD_nextInputType(ZSTD_DCtx *dctx); - -/*-***************************************************************************** - * Block functions - * - * Block functions produce and decode raw zstd blocks, without frame metadata. - * Frame metadata cost is typically ~18 bytes, which can be non-negligible for - * very small blocks (< 100 bytes). User will have to take in charge required - * information to regenerate data, such as compressed and content sizes. - * - * A few rules to respect: - * - Compressing and decompressing require a context structure - * + Use ZSTD_initCCtx() and ZSTD_initDCtx() - * - It is necessary to init context before starting - * + compression : ZSTD_compressBegin() - * + decompression : ZSTD_decompressBegin() - * + variants _usingDict() are also allowed - * + copyCCtx() and copyDCtx() work too - * - Block size is limited, it must be <= ZSTD_getBlockSizeMax() - * + If you need to compress more, cut data into multiple blocks - * + Consider using the regular ZSTD_compress() instead, as frame metadata - * costs become negligible when source size is large. - * - When a block is considered not compressible enough, ZSTD_compressBlock() - * result will be zero. In which case, nothing is produced into `dst`. - * + User must test for such outcome and deal directly with uncompressed data - * + ZSTD_decompressBlock() doesn't accept uncompressed data as input!!! - * + In case of multiple successive blocks, decoder must be informed of - * uncompressed block existence to follow proper history. Use - * ZSTD_insertBlock() in such a case. - ******************************************************************************/ - -/* Define for static allocation */ -#define ZSTD_BLOCKSIZE_ABSOLUTEMAX (128 * 1024) -/*===== Raw zstd block functions =====*/ -size_t ZSTD_getBlockSizeMax(ZSTD_CCtx *cctx); -size_t ZSTD_compressBlock(ZSTD_CCtx *cctx, void *dst, size_t dstCapacity, - const void *src, size_t srcSize); -size_t ZSTD_decompressBlock(ZSTD_DCtx *dctx, void *dst, size_t dstCapacity, - const void *src, size_t srcSize); -size_t ZSTD_insertBlock(ZSTD_DCtx *dctx, const void *blockStart, - size_t blockSize); +size_t zstd_get_frame_header(zstd_frame_header *params, const void *src, + size_t src_size); -#endif /* ZSTD_H */ +#endif /* LINUX_ZSTD_H */ diff --git a/include/linux/zstd_errors.h b/include/linux/zstd_errors.h new file mode 100644 index 000000000000..58b6dd45a969 --- /dev/null +++ b/include/linux/zstd_errors.h @@ -0,0 +1,77 @@ +/* + * Copyright (c) Yann Collet, Facebook, Inc. + * All rights reserved. + * + * This source code is licensed under both the BSD-style license (found in the + * LICENSE file in the root directory of this source tree) and the GPLv2 (found + * in the COPYING file in the root directory of this source tree). + * You may select, at your option, one of the above-listed licenses. + */ + +#ifndef ZSTD_ERRORS_H_398273423 +#define ZSTD_ERRORS_H_398273423 + + +/*===== dependency =====*/ +#include <linux/types.h> /* size_t */ + + +/* ===== ZSTDERRORLIB_API : control library symbols visibility ===== */ +#define ZSTDERRORLIB_VISIBILITY +#define ZSTDERRORLIB_API ZSTDERRORLIB_VISIBILITY + +/*-********************************************* + * Error codes list + *-********************************************* + * Error codes _values_ are pinned down since v1.3.1 only. + * Therefore, don't rely on values if you may link to any version < v1.3.1. + * + * Only values < 100 are considered stable. + * + * note 1 : this API shall be used with static linking only. + * dynamic linking is not yet officially supported. + * note 2 : Prefer relying on the enum than on its value whenever possible + * This is the only supported way to use the error list < v1.3.1 + * note 3 : ZSTD_isError() is always correct, whatever the library version. + **********************************************/ +typedef enum { + ZSTD_error_no_error = 0, + ZSTD_error_GENERIC = 1, + ZSTD_error_prefix_unknown = 10, + ZSTD_error_version_unsupported = 12, + ZSTD_error_frameParameter_unsupported = 14, + ZSTD_error_frameParameter_windowTooLarge = 16, + ZSTD_error_corruption_detected = 20, + ZSTD_error_checksum_wrong = 22, + ZSTD_error_dictionary_corrupted = 30, + ZSTD_error_dictionary_wrong = 32, + ZSTD_error_dictionaryCreation_failed = 34, + ZSTD_error_parameter_unsupported = 40, + ZSTD_error_parameter_outOfBound = 42, + ZSTD_error_tableLog_tooLarge = 44, + ZSTD_error_maxSymbolValue_tooLarge = 46, + ZSTD_error_maxSymbolValue_tooSmall = 48, + ZSTD_error_stage_wrong = 60, + ZSTD_error_init_missing = 62, + ZSTD_error_memory_allocation = 64, + ZSTD_error_workSpace_tooSmall= 66, + ZSTD_error_dstSize_tooSmall = 70, + ZSTD_error_srcSize_wrong = 72, + ZSTD_error_dstBuffer_null = 74, + /* following error codes are __NOT STABLE__, they can be removed or changed in future versions */ + ZSTD_error_frameIndex_tooLarge = 100, + ZSTD_error_seekableIO = 102, + ZSTD_error_dstBuffer_wrong = 104, + ZSTD_error_srcBuffer_wrong = 105, + ZSTD_error_maxCode = 120 /* never EVER use this value directly, it can change in future versions! Use ZSTD_isError() instead */ +} ZSTD_ErrorCode; + +/*! ZSTD_getErrorCode() : + convert a `size_t` function result into a `ZSTD_ErrorCode` enum type, + which can be used to compare with enum list published above */ +ZSTDERRORLIB_API ZSTD_ErrorCode ZSTD_getErrorCode(size_t functionResult); +ZSTDERRORLIB_API const char* ZSTD_getErrorString(ZSTD_ErrorCode code); /*< Same as ZSTD_getErrorName, but using a `ZSTD_ErrorCode` enum argument */ + + + +#endif /* ZSTD_ERRORS_H_398273423 */ diff --git a/include/linux/zstd_lib.h b/include/linux/zstd_lib.h new file mode 100644 index 000000000000..b8c7dbf98390 --- /dev/null +++ b/include/linux/zstd_lib.h @@ -0,0 +1,2432 @@ +/* + * Copyright (c) Yann Collet, Facebook, Inc. + * All rights reserved. + * + * This source code is licensed under both the BSD-style license (found in the + * LICENSE file in the root directory of this source tree) and the GPLv2 (found + * in the COPYING file in the root directory of this source tree). + * You may select, at your option, one of the above-listed licenses. + */ + +#ifndef ZSTD_H_235446 +#define ZSTD_H_235446 + +/* ====== Dependency ======*/ +#include <linux/limits.h> /* INT_MAX */ +#include <linux/types.h> /* size_t */ + + +/* ===== ZSTDLIB_API : control library symbols visibility ===== */ +#define ZSTDLIB_VISIBILITY +#define ZSTDLIB_API ZSTDLIB_VISIBILITY + + +/* ***************************************************************************** + Introduction + + zstd, short for Zstandard, is a fast lossless compression algorithm, targeting + real-time compression scenarios at zlib-level and better compression ratios. + The zstd compression library provides in-memory compression and decompression + functions. + + The library supports regular compression levels from 1 up to ZSTD_maxCLevel(), + which is currently 22. Levels >= 20, labeled `--ultra`, should be used with + caution, as they require more memory. The library also offers negative + compression levels, which extend the range of speed vs. ratio preferences. + The lower the level, the faster the speed (at the cost of compression). + + Compression can be done in: + - a single step (described as Simple API) + - a single step, reusing a context (described as Explicit context) + - unbounded multiple steps (described as Streaming compression) + + The compression ratio achievable on small data can be highly improved using + a dictionary. Dictionary compression can be performed in: + - a single step (described as Simple dictionary API) + - a single step, reusing a dictionary (described as Bulk-processing + dictionary API) + + Advanced experimental functions can be accessed using + `#define ZSTD_STATIC_LINKING_ONLY` before including zstd.h. + + Advanced experimental APIs should never be used with a dynamically-linked + library. They are not "stable"; their definitions or signatures may change in + the future. Only static linking is allowed. +*******************************************************************************/ + +/*------ Version ------*/ +#define ZSTD_VERSION_MAJOR 1 +#define ZSTD_VERSION_MINOR 4 +#define ZSTD_VERSION_RELEASE 10 +#define ZSTD_VERSION_NUMBER (ZSTD_VERSION_MAJOR *100*100 + ZSTD_VERSION_MINOR *100 + ZSTD_VERSION_RELEASE) + +/*! ZSTD_versionNumber() : + * Return runtime library version, the value is (MAJOR*100*100 + MINOR*100 + RELEASE). */ +ZSTDLIB_API unsigned ZSTD_versionNumber(void); + +#define ZSTD_LIB_VERSION ZSTD_VERSION_MAJOR.ZSTD_VERSION_MINOR.ZSTD_VERSION_RELEASE +#define ZSTD_QUOTE(str) #str +#define ZSTD_EXPAND_AND_QUOTE(str) ZSTD_QUOTE(str) +#define ZSTD_VERSION_STRING ZSTD_EXPAND_AND_QUOTE(ZSTD_LIB_VERSION) + +/*! ZSTD_versionString() : + * Return runtime library version, like "1.4.5". Requires v1.3.0+. */ +ZSTDLIB_API const char* ZSTD_versionString(void); + +/* ************************************* + * Default constant + ***************************************/ +#ifndef ZSTD_CLEVEL_DEFAULT +# define ZSTD_CLEVEL_DEFAULT 3 +#endif + +/* ************************************* + * Constants + ***************************************/ + +/* All magic numbers are supposed read/written to/from files/memory using little-endian convention */ +#define ZSTD_MAGICNUMBER 0xFD2FB528 /* valid since v0.8.0 */ +#define ZSTD_MAGIC_DICTIONARY 0xEC30A437 /* valid since v0.7.0 */ +#define ZSTD_MAGIC_SKIPPABLE_START 0x184D2A50 /* all 16 values, from 0x184D2A50 to 0x184D2A5F, signal the beginning of a skippable frame */ +#define ZSTD_MAGIC_SKIPPABLE_MASK 0xFFFFFFF0 + +#define ZSTD_BLOCKSIZELOG_MAX 17 +#define ZSTD_BLOCKSIZE_MAX (1<<ZSTD_BLOCKSIZELOG_MAX) + + + +/* ************************************* +* Simple API +***************************************/ +/*! ZSTD_compress() : + * Compresses `src` content as a single zstd compressed frame into already allocated `dst`. + * Hint : compression runs faster if `dstCapacity` >= `ZSTD_compressBound(srcSize)`. + * @return : compressed size written into `dst` (<= `dstCapacity), + * or an error code if it fails (which can be tested using ZSTD_isError()). */ +ZSTDLIB_API size_t ZSTD_compress( void* dst, size_t dstCapacity, + const void* src, size_t srcSize, + int compressionLevel); + +/*! ZSTD_decompress() : + * `compressedSize` : must be the _exact_ size of some number of compressed and/or skippable frames. + * `dstCapacity` is an upper bound of originalSize to regenerate. + * If user cannot imply a maximum upper bound, it's better to use streaming mode to decompress data. + * @return : the number of bytes decompressed into `dst` (<= `dstCapacity`), + * or an errorCode if it fails (which can be tested using ZSTD_isError()). */ +ZSTDLIB_API size_t ZSTD_decompress( void* dst, size_t dstCapacity, + const void* src, size_t compressedSize); + +/*! ZSTD_getFrameContentSize() : requires v1.3.0+ + * `src` should point to the start of a ZSTD encoded frame. + * `srcSize` must be at least as large as the frame header. + * hint : any size >= `ZSTD_frameHeaderSize_max` is large enough. + * @return : - decompressed size of `src` frame content, if known + * - ZSTD_CONTENTSIZE_UNKNOWN if the size cannot be determined + * - ZSTD_CONTENTSIZE_ERROR if an error occurred (e.g. invalid magic number, srcSize too small) + * note 1 : a 0 return value means the frame is valid but "empty". + * note 2 : decompressed size is an optional field, it may not be present, typically in streaming mode. + * When `return==ZSTD_CONTENTSIZE_UNKNOWN`, data to decompress could be any size. + * In which case, it's necessary to use streaming mode to decompress data. + * Optionally, application can rely on some implicit limit, + * as ZSTD_decompress() only needs an upper bound of decompressed size. + * (For example, data could be necessarily cut into blocks <= 16 KB). + * note 3 : decompressed size is always present when compression is completed using single-pass functions, + * such as ZSTD_compress(), ZSTD_compressCCtx() ZSTD_compress_usingDict() or ZSTD_compress_usingCDict(). + * note 4 : decompressed size can be very large (64-bits value), + * potentially larger than what local system can handle as a single memory segment. + * In which case, it's necessary to use streaming mode to decompress data. + * note 5 : If source is untrusted, decompressed size could be wrong or intentionally modified. + * Always ensure return value fits within application's authorized limits. + * Each application can set its own limits. + * note 6 : This function replaces ZSTD_getDecompressedSize() */ +#define ZSTD_CONTENTSIZE_UNKNOWN (0ULL - 1) +#define ZSTD_CONTENTSIZE_ERROR (0ULL - 2) +ZSTDLIB_API unsigned long long ZSTD_getFrameContentSize(const void *src, size_t srcSize); + +/*! ZSTD_getDecompressedSize() : + * NOTE: This function is now obsolete, in favor of ZSTD_getFrameContentSize(). + * Both functions work the same way, but ZSTD_getDecompressedSize() blends + * "empty", "unknown" and "error" results to the same return value (0), + * while ZSTD_getFrameContentSize() gives them separate return values. + * @return : decompressed size of `src` frame content _if known and not empty_, 0 otherwise. */ +ZSTDLIB_API unsigned long long ZSTD_getDecompressedSize(const void* src, size_t srcSize); + +/*! ZSTD_findFrameCompressedSize() : + * `src` should point to the start of a ZSTD frame or skippable frame. + * `srcSize` must be >= first frame size + * @return : the compressed size of the first frame starting at `src`, + * suitable to pass as `srcSize` to `ZSTD_decompress` or similar, + * or an error code if input is invalid */ +ZSTDLIB_API size_t ZSTD_findFrameCompressedSize(const void* src, size_t srcSize); + + +/*====== Helper functions ======*/ +#define ZSTD_COMPRESSBOUND(srcSize) ((srcSize) + ((srcSize)>>8) + (((srcSize) < (128<<10)) ? (((128<<10) - (srcSize)) >> 11) /* margin, from 64 to 0 */ : 0)) /* this formula ensures that bound(A) + bound(B) <= bound(A+B) as long as A and B >= 128 KB */ +ZSTDLIB_API size_t ZSTD_compressBound(size_t srcSize); /*!< maximum compressed size in worst case single-pass scenario */ +ZSTDLIB_API unsigned ZSTD_isError(size_t code); /*!< tells if a `size_t` function result is an error code */ +ZSTDLIB_API const char* ZSTD_getErrorName(size_t code); /*!< provides readable string from an error code */ +ZSTDLIB_API int ZSTD_minCLevel(void); /*!< minimum negative compression level allowed */ +ZSTDLIB_API int ZSTD_maxCLevel(void); /*!< maximum compression level available */ + + +/* ************************************* +* Explicit context +***************************************/ +/*= Compression context + * When compressing many times, + * it is recommended to allocate a context just once, + * and re-use it for each successive compression operation. + * This will make workload friendlier for system's memory. + * Note : re-using context is just a speed / resource optimization. + * It doesn't change the compression ratio, which remains identical. + * Note 2 : In multi-threaded environments, + * use one different context per thread for parallel execution. + */ +typedef struct ZSTD_CCtx_s ZSTD_CCtx; +ZSTDLIB_API ZSTD_CCtx* ZSTD_createCCtx(void); +ZSTDLIB_API size_t ZSTD_freeCCtx(ZSTD_CCtx* cctx); /* accept NULL pointer */ + +/*! ZSTD_compressCCtx() : + * Same as ZSTD_compress(), using an explicit ZSTD_CCtx. + * Important : in order to behave similarly to `ZSTD_compress()`, + * this function compresses at requested compression level, + * __ignoring any other parameter__ . + * If any advanced parameter was set using the advanced API, + * they will all be reset. Only `compressionLevel` remains. + */ +ZSTDLIB_API size_t ZSTD_compressCCtx(ZSTD_CCtx* cctx, + void* dst, size_t dstCapacity, + const void* src, size_t srcSize, + int compressionLevel); + +/*= Decompression context + * When decompressing many times, + * it is recommended to allocate a context only once, + * and re-use it for each successive compression operation. + * This will make workload friendlier for system's memory. + * Use one context per thread for parallel execution. */ +typedef struct ZSTD_DCtx_s ZSTD_DCtx; +ZSTDLIB_API ZSTD_DCtx* ZSTD_createDCtx(void); +ZSTDLIB_API size_t ZSTD_freeDCtx(ZSTD_DCtx* dctx); /* accept NULL pointer */ + +/*! ZSTD_decompressDCtx() : + * Same as ZSTD_decompress(), + * requires an allocated ZSTD_DCtx. + * Compatible with sticky parameters. + */ +ZSTDLIB_API size_t ZSTD_decompressDCtx(ZSTD_DCtx* dctx, + void* dst, size_t dstCapacity, + const void* src, size_t srcSize); + + +/* ************************************* +* Advanced compression API +***************************************/ + +/* API design : + * Parameters are pushed one by one into an existing context, + * using ZSTD_CCtx_set*() functions. + * Pushed parameters are sticky : they are valid for next compressed frame, and any subsequent frame. + * "sticky" parameters are applicable to `ZSTD_compress2()` and `ZSTD_compressStream*()` ! + * __They do not apply to "simple" one-shot variants such as ZSTD_compressCCtx()__ . + * + * It's possible to reset all parameters to "default" using ZSTD_CCtx_reset(). + * + * This API supercedes all other "advanced" API entry points in the experimental section. + * In the future, we expect to remove from experimental API entry points which are redundant with this API. + */ + + +/* Compression strategies, listed from fastest to strongest */ +typedef enum { ZSTD_fast=1, + ZSTD_dfast=2, + ZSTD_greedy=3, + ZSTD_lazy=4, + ZSTD_lazy2=5, + ZSTD_btlazy2=6, + ZSTD_btopt=7, + ZSTD_btultra=8, + ZSTD_btultra2=9 + /* note : new strategies _might_ be added in the future. + Only the order (from fast to strong) is guaranteed */ +} ZSTD_strategy; + + +typedef enum { + + /* compression parameters + * Note: When compressing with a ZSTD_CDict these parameters are superseded + * by the parameters used to construct the ZSTD_CDict. + * See ZSTD_CCtx_refCDict() for more info (superseded-by-cdict). */ + ZSTD_c_compressionLevel=100, /* Set compression parameters according to pre-defined cLevel table. + * Note that exact compression parameters are dynamically determined, + * depending on both compression level and srcSize (when known). + * Default level is ZSTD_CLEVEL_DEFAULT==3. + * Special: value 0 means default, which is controlled by ZSTD_CLEVEL_DEFAULT. + * Note 1 : it's possible to pass a negative compression level. + * Note 2 : setting a level does not automatically set all other compression parameters + * to default. Setting this will however eventually dynamically impact the compression + * parameters which have not been manually set. The manually set + * ones will 'stick'. */ + /* Advanced compression parameters : + * It's possible to pin down compression parameters to some specific values. + * In which case, these values are no longer dynamically selected by the compressor */ + ZSTD_c_windowLog=101, /* Maximum allowed back-reference distance, expressed as power of 2. + * This will set a memory budget for streaming decompression, + * with larger values requiring more memory + * and typically compressing more. + * Must be clamped between ZSTD_WINDOWLOG_MIN and ZSTD_WINDOWLOG_MAX. + * Special: value 0 means "use default windowLog". + * Note: Using a windowLog greater than ZSTD_WINDOWLOG_LIMIT_DEFAULT + * requires explicitly allowing such size at streaming decompression stage. */ + ZSTD_c_hashLog=102, /* Size of the initial probe table, as a power of 2. + * Resulting memory usage is (1 << (hashLog+2)). + * Must be clamped between ZSTD_HASHLOG_MIN and ZSTD_HASHLOG_MAX. + * Larger tables improve compression ratio of strategies <= dFast, + * and improve speed of strategies > dFast. + * Special: value 0 means "use default hashLog". */ + ZSTD_c_chainLog=103, /* Size of the multi-probe search table, as a power of 2. + * Resulting memory usage is (1 << (chainLog+2)). + * Must be clamped between ZSTD_CHAINLOG_MIN and ZSTD_CHAINLOG_MAX. + * Larger tables result in better and slower compression. + * This parameter is useless for "fast" strategy. + * It's still useful when using "dfast" strategy, + * in which case it defines a secondary probe table. + * Special: value 0 means "use default chainLog". */ + ZSTD_c_searchLog=104, /* Number of search attempts, as a power of 2. + * More attempts result in better and slower compression. + * This parameter is useless for "fast" and "dFast" strategies. + * Special: value 0 means "use default searchLog". */ + ZSTD_c_minMatch=105, /* Minimum size of searched matches. + * Note that Zstandard can still find matches of smaller size, + * it just tweaks its search algorithm to look for this size and larger. + * Larger values increase compression and decompression speed, but decrease ratio. + * Must be clamped between ZSTD_MINMATCH_MIN and ZSTD_MINMATCH_MAX. + * Note that currently, for all strategies < btopt, effective minimum is 4. + * , for all strategies > fast, effective maximum is 6. + * Special: value 0 means "use default minMatchLength". */ + ZSTD_c_targetLength=106, /* Impact of this field depends on strategy. + * For strategies btopt, btultra & btultra2: + * Length of Match considered "good enough" to stop search. + * Larger values make compression stronger, and slower. + * For strategy fast: + * Distance between match sampling. + * Larger values make compression faster, and weaker. + * Special: value 0 means "use default targetLength". */ + ZSTD_c_strategy=107, /* See ZSTD_strategy enum definition. + * The higher the value of selected strategy, the more complex it is, + * resulting in stronger and slower compression. + * Special: value 0 means "use default strategy". */ + + /* LDM mode parameters */ + ZSTD_c_enableLongDistanceMatching=160, /* Enable long distance matching. + * This parameter is designed to improve compression ratio + * for large inputs, by finding large matches at long distance. + * It increases memory usage and window size. + * Note: enabling this parameter increases default ZSTD_c_windowLog to 128 MB + * except when expressly set to a different value. + * Note: will be enabled by default if ZSTD_c_windowLog >= 128 MB and + * compression strategy >= ZSTD_btopt (== compression level 16+) */ + ZSTD_c_ldmHashLog=161, /* Size of the table for long distance matching, as a power of 2. + * Larger values increase memory usage and compression ratio, + * but decrease compression speed. + * Must be clamped between ZSTD_HASHLOG_MIN and ZSTD_HASHLOG_MAX + * default: windowlog - 7. + * Special: value 0 means "automatically determine hashlog". */ + ZSTD_c_ldmMinMatch=162, /* Minimum match size for long distance matcher. + * Larger/too small values usually decrease compression ratio. + * Must be clamped between ZSTD_LDM_MINMATCH_MIN and ZSTD_LDM_MINMATCH_MAX. + * Special: value 0 means "use default value" (default: 64). */ + ZSTD_c_ldmBucketSizeLog=163, /* Log size of each bucket in the LDM hash table for collision resolution. + * Larger values improve collision resolution but decrease compression speed. + * The maximum value is ZSTD_LDM_BUCKETSIZELOG_MAX. + * Special: value 0 means "use default value" (default: 3). */ + ZSTD_c_ldmHashRateLog=164, /* Frequency of inserting/looking up entries into the LDM hash table. + * Must be clamped between 0 and (ZSTD_WINDOWLOG_MAX - ZSTD_HASHLOG_MIN). + * Default is MAX(0, (windowLog - ldmHashLog)), optimizing hash table usage. + * Larger values improve compression speed. + * Deviating far from default value will likely result in a compression ratio decrease. + * Special: value 0 means "automatically determine hashRateLog". */ + + /* frame parameters */ + ZSTD_c_contentSizeFlag=200, /* Content size will be written into frame header _whenever known_ (default:1) + * Content size must be known at the beginning of compression. + * This is automatically the case when using ZSTD_compress2(), + * For streaming scenarios, content size must be provided with ZSTD_CCtx_setPledgedSrcSize() */ + ZSTD_c_checksumFlag=201, /* A 32-bits checksum of content is written at end of frame (default:0) */ + ZSTD_c_dictIDFlag=202, /* When applicable, dictionary's ID is written into frame header (default:1) */ + + /* multi-threading parameters */ + /* These parameters are only active if multi-threading is enabled (compiled with build macro ZSTD_MULTITHREAD). + * Otherwise, trying to set any other value than default (0) will be a no-op and return an error. + * In a situation where it's unknown if the linked library supports multi-threading or not, + * setting ZSTD_c_nbWorkers to any value >= 1 and consulting the return value provides a quick way to check this property. + */ + ZSTD_c_nbWorkers=400, /* Select how many threads will be spawned to compress in parallel. + * When nbWorkers >= 1, triggers asynchronous mode when invoking ZSTD_compressStream*() : + * ZSTD_compressStream*() consumes input and flush output if possible, but immediately gives back control to caller, + * while compression is performed in parallel, within worker thread(s). + * (note : a strong exception to this rule is when first invocation of ZSTD_compressStream2() sets ZSTD_e_end : + * in which case, ZSTD_compressStream2() delegates to ZSTD_compress2(), which is always a blocking call). + * More workers improve speed, but also increase memory usage. + * Default value is `0`, aka "single-threaded mode" : no worker is spawned, + * compression is performed inside Caller's thread, and all invocations are blocking */ + ZSTD_c_jobSize=401, /* Size of a compression job. This value is enforced only when nbWorkers >= 1. + * Each compression job is completed in parallel, so this value can indirectly impact the nb of active threads. + * 0 means default, which is dynamically determined based on compression parameters. + * Job size must be a minimum of overlap size, or 1 MB, whichever is largest. + * The minimum size is automatically and transparently enforced. */ + ZSTD_c_overlapLog=402, /* Control the overlap size, as a fraction of window size. + * The overlap size is an amount of data reloaded from previous job at the beginning of a new job. + * It helps preserve compression ratio, while each job is compressed in parallel. + * This value is enforced only when nbWorkers >= 1. + * Larger values increase compression ratio, but decrease speed. + * Possible values range from 0 to 9 : + * - 0 means "default" : value will be determined by the library, depending on strategy + * - 1 means "no overlap" + * - 9 means "full overlap", using a full window size. + * Each intermediate rank increases/decreases load size by a factor 2 : + * 9: full window; 8: w/2; 7: w/4; 6: w/8; 5:w/16; 4: w/32; 3:w/64; 2:w/128; 1:no overlap; 0:default + * default value varies between 6 and 9, depending on strategy */ + + /* note : additional experimental parameters are also available + * within the experimental section of the API. + * At the time of this writing, they include : + * ZSTD_c_rsyncable + * ZSTD_c_format + * ZSTD_c_forceMaxWindow + * ZSTD_c_forceAttachDict + * ZSTD_c_literalCompressionMode + * ZSTD_c_targetCBlockSize + * ZSTD_c_srcSizeHint + * ZSTD_c_enableDedicatedDictSearch + * ZSTD_c_stableInBuffer + * ZSTD_c_stableOutBuffer + * ZSTD_c_blockDelimiters + * ZSTD_c_validateSequences + * Because they are not stable, it's necessary to define ZSTD_STATIC_LINKING_ONLY to access them. + * note : never ever use experimentalParam? names directly; + * also, the enums values themselves are unstable and can still change. + */ + ZSTD_c_experimentalParam1=500, + ZSTD_c_experimentalParam2=10, + ZSTD_c_experimentalParam3=1000, + ZSTD_c_experimentalParam4=1001, + ZSTD_c_experimentalParam5=1002, + ZSTD_c_experimentalParam6=1003, + ZSTD_c_experimentalParam7=1004, + ZSTD_c_experimentalParam8=1005, + ZSTD_c_experimentalParam9=1006, + ZSTD_c_experimentalParam10=1007, + ZSTD_c_experimentalParam11=1008, + ZSTD_c_experimentalParam12=1009 +} ZSTD_cParameter; + +typedef struct { + size_t error; + int lowerBound; + int upperBound; +} ZSTD_bounds; + +/*! ZSTD_cParam_getBounds() : + * All parameters must belong to an interval with lower and upper bounds, + * otherwise they will either trigger an error or be automatically clamped. + * @return : a structure, ZSTD_bounds, which contains + * - an error status field, which must be tested using ZSTD_isError() + * - lower and upper bounds, both inclusive + */ +ZSTDLIB_API ZSTD_bounds ZSTD_cParam_getBounds(ZSTD_cParameter cParam); + +/*! ZSTD_CCtx_setParameter() : + * Set one compression parameter, selected by enum ZSTD_cParameter. + * All parameters have valid bounds. Bounds can be queried using ZSTD_cParam_getBounds(). + * Providing a value beyond bound will either clamp it, or trigger an error (depending on parameter). + * Setting a parameter is generally only possible during frame initialization (before starting compression). + * Exception : when using multi-threading mode (nbWorkers >= 1), + * the following parameters can be updated _during_ compression (within same frame): + * => compressionLevel, hashLog, chainLog, searchLog, minMatch, targetLength and strategy. + * new parameters will be active for next job only (after a flush()). + * @return : an error code (which can be tested using ZSTD_isError()). + */ +ZSTDLIB_API size_t ZSTD_CCtx_setParameter(ZSTD_CCtx* cctx, ZSTD_cParameter param, int value); + +/*! ZSTD_CCtx_setPledgedSrcSize() : + * Total input data size to be compressed as a single frame. + * Value will be written in frame header, unless if explicitly forbidden using ZSTD_c_contentSizeFlag. + * This value will also be controlled at end of frame, and trigger an error if not respected. + * @result : 0, or an error code (which can be tested with ZSTD_isError()). + * Note 1 : pledgedSrcSize==0 actually means zero, aka an empty frame. + * In order to mean "unknown content size", pass constant ZSTD_CONTENTSIZE_UNKNOWN. + * ZSTD_CONTENTSIZE_UNKNOWN is default value for any new frame. + * Note 2 : pledgedSrcSize is only valid once, for the next frame. + * It's discarded at the end of the frame, and replaced by ZSTD_CONTENTSIZE_UNKNOWN. + * Note 3 : Whenever all input data is provided and consumed in a single round, + * for example with ZSTD_compress2(), + * or invoking immediately ZSTD_compressStream2(,,,ZSTD_e_end), + * this value is automatically overridden by srcSize instead. + */ +ZSTDLIB_API size_t ZSTD_CCtx_setPledgedSrcSize(ZSTD_CCtx* cctx, unsigned long long pledgedSrcSize); + +typedef enum { + ZSTD_reset_session_only = 1, + ZSTD_reset_parameters = 2, + ZSTD_reset_session_and_parameters = 3 +} ZSTD_ResetDirective; + +/*! ZSTD_CCtx_reset() : + * There are 2 different things that can be reset, independently or jointly : + * - The session : will stop compressing current frame, and make CCtx ready to start a new one. + * Useful after an error, or to interrupt any ongoing compression. + * Any internal data not yet flushed is cancelled. + * Compression parameters and dictionary remain unchanged. + * They will be used to compress next frame. + * Resetting session never fails. + * - The parameters : changes all parameters back to "default". + * This removes any reference to any dictionary too. + * Parameters can only be changed between 2 sessions (i.e. no compression is currently ongoing) + * otherwise the reset fails, and function returns an error value (which can be tested using ZSTD_isError()) + * - Both : similar to resetting the session, followed by resetting parameters. + */ +ZSTDLIB_API size_t ZSTD_CCtx_reset(ZSTD_CCtx* cctx, ZSTD_ResetDirective reset); + +/*! ZSTD_compress2() : + * Behave the same as ZSTD_compressCCtx(), but compression parameters are set using the advanced API. + * ZSTD_compress2() always starts a new frame. + * Should cctx hold data from a previously unfinished frame, everything about it is forgotten. + * - Compression parameters are pushed into CCtx before starting compression, using ZSTD_CCtx_set*() + * - The function is always blocking, returns when compression is completed. + * Hint : compression runs faster if `dstCapacity` >= `ZSTD_compressBound(srcSize)`. + * @return : compressed size written into `dst` (<= `dstCapacity), + * or an error code if it fails (which can be tested using ZSTD_isError()). + */ +ZSTDLIB_API size_t ZSTD_compress2( ZSTD_CCtx* cctx, + void* dst, size_t dstCapacity, + const void* src, size_t srcSize); + + +/* ************************************* +* Advanced decompression API +***************************************/ + +/* The advanced API pushes parameters one by one into an existing DCtx context. + * Parameters are sticky, and remain valid for all following frames + * using the same DCtx context. + * It's possible to reset parameters to default values using ZSTD_DCtx_reset(). + * Note : This API is compatible with existing ZSTD_decompressDCtx() and ZSTD_decompressStream(). + * Therefore, no new decompression function is necessary. + */ + +typedef enum { + + ZSTD_d_windowLogMax=100, /* Select a size limit (in power of 2) beyond which + * the streaming API will refuse to allocate memory buffer + * in order to protect the host from unreasonable memory requirements. + * This parameter is only useful in streaming mode, since no internal buffer is allocated in single-pass mode. + * By default, a decompression context accepts window sizes <= (1 << ZSTD_WINDOWLOG_LIMIT_DEFAULT). + * Special: value 0 means "use default maximum windowLog". */ + + /* note : additional experimental parameters are also available + * within the experimental section of the API. + * At the time of this writing, they include : + * ZSTD_d_format + * ZSTD_d_stableOutBuffer + * ZSTD_d_forceIgnoreChecksum + * ZSTD_d_refMultipleDDicts + * Because they are not stable, it's necessary to define ZSTD_STATIC_LINKING_ONLY to access them. + * note : never ever use experimentalParam? names directly + */ + ZSTD_d_experimentalParam1=1000, + ZSTD_d_experimentalParam2=1001, + ZSTD_d_experimentalParam3=1002, + ZSTD_d_experimentalParam4=1003 + +} ZSTD_dParameter; + +/*! ZSTD_dParam_getBounds() : + * All parameters must belong to an interval with lower and upper bounds, + * otherwise they will either trigger an error or be automatically clamped. + * @return : a structure, ZSTD_bounds, which contains + * - an error status field, which must be tested using ZSTD_isError() + * - both lower and upper bounds, inclusive + */ +ZSTDLIB_API ZSTD_bounds ZSTD_dParam_getBounds(ZSTD_dParameter dParam); + +/*! ZSTD_DCtx_setParameter() : + * Set one compression parameter, selected by enum ZSTD_dParameter. + * All parameters have valid bounds. Bounds can be queried using ZSTD_dParam_getBounds(). + * Providing a value beyond bound will either clamp it, or trigger an error (depending on parameter). + * Setting a parameter is only possible during frame initialization (before starting decompression). + * @return : 0, or an error code (which can be tested using ZSTD_isError()). + */ +ZSTDLIB_API size_t ZSTD_DCtx_setParameter(ZSTD_DCtx* dctx, ZSTD_dParameter param, int value); + +/*! ZSTD_DCtx_reset() : + * Return a DCtx to clean state. + * Session and parameters can be reset jointly or separately. + * Parameters can only be reset when no active frame is being decompressed. + * @return : 0, or an error code, which can be tested with ZSTD_isError() + */ +ZSTDLIB_API size_t ZSTD_DCtx_reset(ZSTD_DCtx* dctx, ZSTD_ResetDirective reset); + + +/* ************************** +* Streaming +****************************/ + +typedef struct ZSTD_inBuffer_s { + const void* src; /*< start of input buffer */ + size_t size; /*< size of input buffer */ + size_t pos; /*< position where reading stopped. Will be updated. Necessarily 0 <= pos <= size */ +} ZSTD_inBuffer; + +typedef struct ZSTD_outBuffer_s { + void* dst; /*< start of output buffer */ + size_t size; /*< size of output buffer */ + size_t pos; /*< position where writing stopped. Will be updated. Necessarily 0 <= pos <= size */ +} ZSTD_outBuffer; + + + +/*-*********************************************************************** +* Streaming compression - HowTo +* +* A ZSTD_CStream object is required to track streaming operation. +* Use ZSTD_createCStream() and ZSTD_freeCStream() to create/release resources. +* ZSTD_CStream objects can be reused multiple times on consecutive compression operations. +* It is recommended to re-use ZSTD_CStream since it will play nicer with system's memory, by re-using already allocated memory. +* +* For parallel execution, use one separate ZSTD_CStream per thread. +* +* note : since v1.3.0, ZSTD_CStream and ZSTD_CCtx are the same thing. +* +* Parameters are sticky : when starting a new compression on the same context, +* it will re-use the same sticky parameters as previous compression session. +* When in doubt, it's recommended to fully initialize the context before usage. +* Use ZSTD_CCtx_reset() to reset the context and ZSTD_CCtx_setParameter(), +* ZSTD_CCtx_setPledgedSrcSize(), or ZSTD_CCtx_loadDictionary() and friends to +* set more specific parameters, the pledged source size, or load a dictionary. +* +* Use ZSTD_compressStream2() with ZSTD_e_continue as many times as necessary to +* consume input stream. The function will automatically update both `pos` +* fields within `input` and `output`. +* Note that the function may not consume the entire input, for example, because +* the output buffer is already full, in which case `input.pos < input.size`. +* The caller must check if input has been entirely consumed. +* If not, the caller must make some room to receive more compressed data, +* and then present again remaining input data. +* note: ZSTD_e_continue is guaranteed to make some forward progress when called, +* but doesn't guarantee maximal forward progress. This is especially relevant +* when compressing with multiple threads. The call won't block if it can +* consume some input, but if it can't it will wait for some, but not all, +* output to be flushed. +* @return : provides a minimum amount of data remaining to be flushed from internal buffers +* or an error code, which can be tested using ZSTD_isError(). +* +* At any moment, it's possible to flush whatever data might remain stuck within internal buffer, +* using ZSTD_compressStream2() with ZSTD_e_flush. `output->pos` will be updated. +* Note that, if `output->size` is too small, a single invocation with ZSTD_e_flush might not be enough (return code > 0). +* In which case, make some room to receive more compressed data, and call again ZSTD_compressStream2() with ZSTD_e_flush. +* You must continue calling ZSTD_compressStream2() with ZSTD_e_flush until it returns 0, at which point you can change the +* operation. +* note: ZSTD_e_flush will flush as much output as possible, meaning when compressing with multiple threads, it will +* block until the flush is complete or the output buffer is full. +* @return : 0 if internal buffers are entirely flushed, +* >0 if some data still present within internal buffer (the value is minimal estimation of remaining size), +* or an error code, which can be tested using ZSTD_isError(). +* +* Calling ZSTD_compressStream2() with ZSTD_e_end instructs to finish a frame. +* It will perform a flush and write frame epilogue. +* The epilogue is required for decoders to consider a frame completed. +* flush operation is the same, and follows same rules as calling ZSTD_compressStream2() with ZSTD_e_flush. +* You must continue calling ZSTD_compressStream2() with ZSTD_e_end until it returns 0, at which point you are free to +* start a new frame. +* note: ZSTD_e_end will flush as much output as possible, meaning when compressing with multiple threads, it will +* block until the flush is complete or the output buffer is full. +* @return : 0 if frame fully completed and fully flushed, +* >0 if some data still present within internal buffer (the value is minimal estimation of remaining size), +* or an error code, which can be tested using ZSTD_isError(). +* +* *******************************************************************/ + +typedef ZSTD_CCtx ZSTD_CStream; /*< CCtx and CStream are now effectively same object (>= v1.3.0) */ + /* Continue to distinguish them for compatibility with older versions <= v1.2.0 */ +/*===== ZSTD_CStream management functions =====*/ +ZSTDLIB_API ZSTD_CStream* ZSTD_createCStream(void); +ZSTDLIB_API size_t ZSTD_freeCStream(ZSTD_CStream* zcs); /* accept NULL pointer */ + +/*===== Streaming compression functions =====*/ +typedef enum { + ZSTD_e_continue=0, /* collect more data, encoder decides when to output compressed result, for optimal compression ratio */ + ZSTD_e_flush=1, /* flush any data provided so far, + * it creates (at least) one new block, that can be decoded immediately on reception; + * frame will continue: any future data can still reference previously compressed data, improving compression. + * note : multithreaded compression will block to flush as much output as possible. */ + ZSTD_e_end=2 /* flush any remaining data _and_ close current frame. + * note that frame is only closed after compressed data is fully flushed (return value == 0). + * After that point, any additional data starts a new frame. + * note : each frame is independent (does not reference any content from previous frame). + : note : multithreaded compression will block to flush as much output as possible. */ +} ZSTD_EndDirective; + +/*! ZSTD_compressStream2() : + * Behaves about the same as ZSTD_compressStream, with additional control on end directive. + * - Compression parameters are pushed into CCtx before starting compression, using ZSTD_CCtx_set*() + * - Compression parameters cannot be changed once compression is started (save a list of exceptions in multi-threading mode) + * - output->pos must be <= dstCapacity, input->pos must be <= srcSize + * - output->pos and input->pos will be updated. They are guaranteed to remain below their respective limit. + * - endOp must be a valid directive + * - When nbWorkers==0 (default), function is blocking : it completes its job before returning to caller. + * - When nbWorkers>=1, function is non-blocking : it copies a portion of input, distributes jobs to internal worker threads, flush to output whatever is available, + * and then immediately returns, just indicating that there is some data remaining to be flushed. + * The function nonetheless guarantees forward progress : it will return only after it reads or write at least 1+ byte. + * - Exception : if the first call requests a ZSTD_e_end directive and provides enough dstCapacity, the function delegates to ZSTD_compress2() which is always blocking. + * - @return provides a minimum amount of data remaining to be flushed from internal buffers + * or an error code, which can be tested using ZSTD_isError(). + * if @return != 0, flush is not fully completed, there is still some data left within internal buffers. + * This is useful for ZSTD_e_flush, since in this case more flushes are necessary to empty all buffers. + * For ZSTD_e_end, @return == 0 when internal buffers are fully flushed and frame is completed. + * - after a ZSTD_e_end directive, if internal buffer is not fully flushed (@return != 0), + * only ZSTD_e_end or ZSTD_e_flush operations are allowed. + * Before starting a new compression job, or changing compression parameters, + * it is required to fully flush internal buffers. + */ +ZSTDLIB_API size_t ZSTD_compressStream2( ZSTD_CCtx* cctx, + ZSTD_outBuffer* output, + ZSTD_inBuffer* input, + ZSTD_EndDirective endOp); + + +/* These buffer sizes are softly recommended. + * They are not required : ZSTD_compressStream*() happily accepts any buffer size, for both input and output. + * Respecting the recommended size just makes it a bit easier for ZSTD_compressStream*(), + * reducing the amount of memory shuffling and buffering, resulting in minor performance savings. + * + * However, note that these recommendations are from the perspective of a C caller program. + * If the streaming interface is invoked from some other language, + * especially managed ones such as Java or Go, through a foreign function interface such as jni or cgo, + * a major performance rule is to reduce crossing such interface to an absolute minimum. + * It's not rare that performance ends being spent more into the interface, rather than compression itself. + * In which cases, prefer using large buffers, as large as practical, + * for both input and output, to reduce the nb of roundtrips. + */ +ZSTDLIB_API size_t ZSTD_CStreamInSize(void); /*< recommended size for input buffer */ +ZSTDLIB_API size_t ZSTD_CStreamOutSize(void); /*< recommended size for output buffer. Guarantee to successfully flush at least one complete compressed block. */ + + +/* ***************************************************************************** + * This following is a legacy streaming API. + * It can be replaced by ZSTD_CCtx_reset() and ZSTD_compressStream2(). + * It is redundant, but remains fully supported. + * Advanced parameters and dictionary compression can only be used through the + * new API. + ******************************************************************************/ + +/*! + * Equivalent to: + * + * ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only); + * ZSTD_CCtx_refCDict(zcs, NULL); // clear the dictionary (if any) + * ZSTD_CCtx_setParameter(zcs, ZSTD_c_compressionLevel, compressionLevel); + */ +ZSTDLIB_API size_t ZSTD_initCStream(ZSTD_CStream* zcs, int compressionLevel); +/*! + * Alternative for ZSTD_compressStream2(zcs, output, input, ZSTD_e_continue). + * NOTE: The return value is different. ZSTD_compressStream() returns a hint for + * the next read size (if non-zero and not an error). ZSTD_compressStream2() + * returns the minimum nb of bytes left to flush (if non-zero and not an error). + */ +ZSTDLIB_API size_t ZSTD_compressStream(ZSTD_CStream* zcs, ZSTD_outBuffer* output, ZSTD_inBuffer* input); +/*! Equivalent to ZSTD_compressStream2(zcs, output, &emptyInput, ZSTD_e_flush). */ +ZSTDLIB_API size_t ZSTD_flushStream(ZSTD_CStream* zcs, ZSTD_outBuffer* output); +/*! Equivalent to ZSTD_compressStream2(zcs, output, &emptyInput, ZSTD_e_end). */ +ZSTDLIB_API size_t ZSTD_endStream(ZSTD_CStream* zcs, ZSTD_outBuffer* output); + + +/*-*************************************************************************** +* Streaming decompression - HowTo +* +* A ZSTD_DStream object is required to track streaming operations. +* Use ZSTD_createDStream() and ZSTD_freeDStream() to create/release resources. +* ZSTD_DStream objects can be re-used multiple times. +* +* Use ZSTD_initDStream() to start a new decompression operation. +* @return : recommended first input size +* Alternatively, use advanced API to set specific properties. +* +* Use ZSTD_decompressStream() repetitively to consume your input. +* The function will update both `pos` fields. +* If `input.pos < input.size`, some input has not been consumed. +* It's up to the caller to present again remaining data. +* The function tries to flush all data decoded immediately, respecting output buffer size. +* If `output.pos < output.size`, decoder has flushed everything it could. +* But if `output.pos == output.size`, there might be some data left within internal buffers., +* In which case, call ZSTD_decompressStream() again to flush whatever remains in the buffer. +* Note : with no additional input provided, amount of data flushed is necessarily <= ZSTD_BLOCKSIZE_MAX. +* @return : 0 when a frame is completely decoded and fully flushed, +* or an error code, which can be tested using ZSTD_isError(), +* or any other value > 0, which means there is still some decoding or flushing to do to complete current frame : +* the return value is a suggested next input size (just a hint for better latency) +* that will never request more than the remaining frame size. +* *******************************************************************************/ + +typedef ZSTD_DCtx ZSTD_DStream; /*< DCtx and DStream are now effectively same object (>= v1.3.0) */ + /* For compatibility with versions <= v1.2.0, prefer differentiating them. */ +/*===== ZSTD_DStream management functions =====*/ +ZSTDLIB_API ZSTD_DStream* ZSTD_createDStream(void); +ZSTDLIB_API size_t ZSTD_freeDStream(ZSTD_DStream* zds); /* accept NULL pointer */ + +/*===== Streaming decompression functions =====*/ + +/* This function is redundant with the advanced API and equivalent to: + * + * ZSTD_DCtx_reset(zds, ZSTD_reset_session_only); + * ZSTD_DCtx_refDDict(zds, NULL); + */ +ZSTDLIB_API size_t ZSTD_initDStream(ZSTD_DStream* zds); + +ZSTDLIB_API size_t ZSTD_decompressStream(ZSTD_DStream* zds, ZSTD_outBuffer* output, ZSTD_inBuffer* input); + +ZSTDLIB_API size_t ZSTD_DStreamInSize(void); /*!< recommended size for input buffer */ +ZSTDLIB_API size_t ZSTD_DStreamOutSize(void); /*!< recommended size for output buffer. Guarantee to successfully flush at least one complete block in all circumstances. */ + + +/* ************************ +* Simple dictionary API +***************************/ +/*! ZSTD_compress_usingDict() : + * Compression at an explicit compression level using a Dictionary. + * A dictionary can be any arbitrary data segment (also called a prefix), + * or a buffer with specified information (see dictBuilder/zdict.h). + * Note : This function loads the dictionary, resulting in significant startup delay. + * It's intended for a dictionary used only once. + * Note 2 : When `dict == NULL || dictSize < 8` no dictionary is used. */ +ZSTDLIB_API size_t ZSTD_compress_usingDict(ZSTD_CCtx* ctx, + void* dst, size_t dstCapacity, + const void* src, size_t srcSize, + const void* dict,size_t dictSize, + int compressionLevel); + +/*! ZSTD_decompress_usingDict() : + * Decompression using a known Dictionary. + * Dictionary must be identical to the one used during compression. + * Note : This function loads the dictionary, resulting in significant startup delay. + * It's intended for a dictionary used only once. + * Note : When `dict == NULL || dictSize < 8` no dictionary is used. */ +ZSTDLIB_API size_t ZSTD_decompress_usingDict(ZSTD_DCtx* dctx, + void* dst, size_t dstCapacity, + const void* src, size_t srcSize, + const void* dict,size_t dictSize); + + +/* ********************************* + * Bulk processing dictionary API + **********************************/ +typedef struct ZSTD_CDict_s ZSTD_CDict; + +/*! ZSTD_createCDict() : + * When compressing multiple messages or blocks using the same dictionary, + * it's recommended to digest the dictionary only once, since it's a costly operation. + * ZSTD_createCDict() will create a state from digesting a dictionary. + * The resulting state can be used for future compression operations with very limited startup cost. + * ZSTD_CDict can be created once and shared by multiple threads concurrently, since its usage is read-only. + * @dictBuffer can be released after ZSTD_CDict creation, because its content is copied within CDict. + * Note 1 : Consider experimental function `ZSTD_createCDict_byReference()` if you prefer to not duplicate @dictBuffer content. + * Note 2 : A ZSTD_CDict can be created from an empty @dictBuffer, + * in which case the only thing that it transports is the @compressionLevel. + * This can be useful in a pipeline featuring ZSTD_compress_usingCDict() exclusively, + * expecting a ZSTD_CDict parameter with any data, including those without a known dictionary. */ +ZSTDLIB_API ZSTD_CDict* ZSTD_createCDict(const void* dictBuffer, size_t dictSize, + int compressionLevel); + +/*! ZSTD_freeCDict() : + * Function frees memory allocated by ZSTD_createCDict(). + * If a NULL pointer is passed, no operation is performed. */ +ZSTDLIB_API size_t ZSTD_freeCDict(ZSTD_CDict* CDict); + +/*! ZSTD_compress_usingCDict() : + * Compression using a digested Dictionary. + * Recommended when same dictionary is used multiple times. + * Note : compression level is _decided at dictionary creation time_, + * and frame parameters are hardcoded (dictID=yes, contentSize=yes, checksum=no) */ +ZSTDLIB_API size_t ZSTD_compress_usingCDict(ZSTD_CCtx* cctx, + void* dst, size_t dstCapacity, + const void* src, size_t srcSize, + const ZSTD_CDict* cdict); + + +typedef struct ZSTD_DDict_s ZSTD_DDict; + +/*! ZSTD_createDDict() : + * Create a digested dictionary, ready to start decompression operation without startup delay. + * dictBuffer can be released after DDict creation, as its content is copied inside DDict. */ +ZSTDLIB_API ZSTD_DDict* ZSTD_createDDict(const void* dictBuffer, size_t dictSize); + +/*! ZSTD_freeDDict() : + * Function frees memory allocated with ZSTD_createDDict() + * If a NULL pointer is passed, no operation is performed. */ +ZSTDLIB_API size_t ZSTD_freeDDict(ZSTD_DDict* ddict); + +/*! ZSTD_decompress_usingDDict() : + * Decompression using a digested Dictionary. + * Recommended when same dictionary is used multiple times. */ +ZSTDLIB_API size_t ZSTD_decompress_usingDDict(ZSTD_DCtx* dctx, + void* dst, size_t dstCapacity, + const void* src, size_t srcSize, + const ZSTD_DDict* ddict); + + +/* ****************************** + * Dictionary helper functions + *******************************/ + +/*! ZSTD_getDictID_fromDict() : + * Provides the dictID stored within dictionary. + * if @return == 0, the dictionary is not conformant with Zstandard specification. + * It can still be loaded, but as a content-only dictionary. */ +ZSTDLIB_API unsigned ZSTD_getDictID_fromDict(const void* dict, size_t dictSize); + +/*! ZSTD_getDictID_fromDDict() : + * Provides the dictID of the dictionary loaded into `ddict`. + * If @return == 0, the dictionary is not conformant to Zstandard specification, or empty. + * Non-conformant dictionaries can still be loaded, but as content-only dictionaries. */ +ZSTDLIB_API unsigned ZSTD_getDictID_fromDDict(const ZSTD_DDict* ddict); + +/*! ZSTD_getDictID_fromFrame() : + * Provides the dictID required to decompressed the frame stored within `src`. + * If @return == 0, the dictID could not be decoded. + * This could for one of the following reasons : + * - The frame does not require a dictionary to be decoded (most common case). + * - The frame was built with dictID intentionally removed. Whatever dictionary is necessary is a hidden information. + * Note : this use case also happens when using a non-conformant dictionary. + * - `srcSize` is too small, and as a result, the frame header could not be decoded (only possible if `srcSize < ZSTD_FRAMEHEADERSIZE_MAX`). + * - This is not a Zstandard frame. + * When identifying the exact failure cause, it's possible to use ZSTD_getFrameHeader(), which will provide a more precise error code. */ +ZSTDLIB_API unsigned ZSTD_getDictID_fromFrame(const void* src, size_t srcSize); + + +/* ***************************************************************************** + * Advanced dictionary and prefix API + * + * This API allows dictionaries to be used with ZSTD_compress2(), + * ZSTD_compressStream2(), and ZSTD_decompress(). Dictionaries are sticky, and + * only reset with the context is reset with ZSTD_reset_parameters or + * ZSTD_reset_session_and_parameters. Prefixes are single-use. + ******************************************************************************/ + + +/*! ZSTD_CCtx_loadDictionary() : + * Create an internal CDict from `dict` buffer. + * Decompression will have to use same dictionary. + * @result : 0, or an error code (which can be tested with ZSTD_isError()). + * Special: Loading a NULL (or 0-size) dictionary invalidates previous dictionary, + * meaning "return to no-dictionary mode". + * Note 1 : Dictionary is sticky, it will be used for all future compressed frames. + * To return to "no-dictionary" situation, load a NULL dictionary (or reset parameters). + * Note 2 : Loading a dictionary involves building tables. + * It's also a CPU consuming operation, with non-negligible impact on latency. + * Tables are dependent on compression parameters, and for this reason, + * compression parameters can no longer be changed after loading a dictionary. + * Note 3 :`dict` content will be copied internally. + * Use experimental ZSTD_CCtx_loadDictionary_byReference() to reference content instead. + * In such a case, dictionary buffer must outlive its users. + * Note 4 : Use ZSTD_CCtx_loadDictionary_advanced() + * to precisely select how dictionary content must be interpreted. */ +ZSTDLIB_API size_t ZSTD_CCtx_loadDictionary(ZSTD_CCtx* cctx, const void* dict, size_t dictSize); + +/*! ZSTD_CCtx_refCDict() : + * Reference a prepared dictionary, to be used for all next compressed frames. + * Note that compression parameters are enforced from within CDict, + * and supersede any compression parameter previously set within CCtx. + * The parameters ignored are labelled as "superseded-by-cdict" in the ZSTD_cParameter enum docs. + * The ignored parameters will be used again if the CCtx is returned to no-dictionary mode. + * The dictionary will remain valid for future compressed frames using same CCtx. + * @result : 0, or an error code (which can be tested with ZSTD_isError()). + * Special : Referencing a NULL CDict means "return to no-dictionary mode". + * Note 1 : Currently, only one dictionary can be managed. + * Referencing a new dictionary effectively "discards" any previous one. + * Note 2 : CDict is just referenced, its lifetime must outlive its usage within CCtx. */ +ZSTDLIB_API size_t ZSTD_CCtx_refCDict(ZSTD_CCtx* cctx, const ZSTD_CDict* cdict); + +/*! ZSTD_CCtx_refPrefix() : + * Reference a prefix (single-usage dictionary) for next compressed frame. + * A prefix is **only used once**. Tables are discarded at end of frame (ZSTD_e_end). + * Decompression will need same prefix to properly regenerate data. + * Compressing with a prefix is similar in outcome as performing a diff and compressing it, + * but performs much faster, especially during decompression (compression speed is tunable with compression level). + * @result : 0, or an error code (which can be tested with ZSTD_isError()). + * Special: Adding any prefix (including NULL) invalidates any previous prefix or dictionary + * Note 1 : Prefix buffer is referenced. It **must** outlive compression. + * Its content must remain unmodified during compression. + * Note 2 : If the intention is to diff some large src data blob with some prior version of itself, + * ensure that the window size is large enough to contain the entire source. + * See ZSTD_c_windowLog. + * Note 3 : Referencing a prefix involves building tables, which are dependent on compression parameters. + * It's a CPU consuming operation, with non-negligible impact on latency. + * If there is a need to use the same prefix multiple times, consider loadDictionary instead. + * Note 4 : By default, the prefix is interpreted as raw content (ZSTD_dct_rawContent). + * Use experimental ZSTD_CCtx_refPrefix_advanced() to alter dictionary interpretation. */ +ZSTDLIB_API size_t ZSTD_CCtx_refPrefix(ZSTD_CCtx* cctx, + const void* prefix, size_t prefixSize); + +/*! ZSTD_DCtx_loadDictionary() : + * Create an internal DDict from dict buffer, + * to be used to decompress next frames. + * The dictionary remains valid for all future frames, until explicitly invalidated. + * @result : 0, or an error code (which can be tested with ZSTD_isError()). + * Special : Adding a NULL (or 0-size) dictionary invalidates any previous dictionary, + * meaning "return to no-dictionary mode". + * Note 1 : Loading a dictionary involves building tables, + * which has a non-negligible impact on CPU usage and latency. + * It's recommended to "load once, use many times", to amortize the cost + * Note 2 :`dict` content will be copied internally, so `dict` can be released after loading. + * Use ZSTD_DCtx_loadDictionary_byReference() to reference dictionary content instead. + * Note 3 : Use ZSTD_DCtx_loadDictionary_advanced() to take control of + * how dictionary content is loaded and interpreted. + */ +ZSTDLIB_API size_t ZSTD_DCtx_loadDictionary(ZSTD_DCtx* dctx, const void* dict, size_t dictSize); + +/*! ZSTD_DCtx_refDDict() : + * Reference a prepared dictionary, to be used to decompress next frames. + * The dictionary remains active for decompression of future frames using same DCtx. + * + * If called with ZSTD_d_refMultipleDDicts enabled, repeated calls of this function + * will store the DDict references in a table, and the DDict used for decompression + * will be determined at decompression time, as per the dict ID in the frame. + * The memory for the table is allocated on the first call to refDDict, and can be + * freed with ZSTD_freeDCtx(). + * + * @result : 0, or an error code (which can be tested with ZSTD_isError()). + * Note 1 : Currently, only one dictionary can be managed. + * Referencing a new dictionary effectively "discards" any previous one. + * Special: referencing a NULL DDict means "return to no-dictionary mode". + * Note 2 : DDict is just referenced, its lifetime must outlive its usage from DCtx. + */ +ZSTDLIB_API size_t ZSTD_DCtx_refDDict(ZSTD_DCtx* dctx, const ZSTD_DDict* ddict); + +/*! ZSTD_DCtx_refPrefix() : + * Reference a prefix (single-usage dictionary) to decompress next frame. + * This is the reverse operation of ZSTD_CCtx_refPrefix(), + * and must use the same prefix as the one used during compression. + * Prefix is **only used once**. Reference is discarded at end of frame. + * End of frame is reached when ZSTD_decompressStream() returns 0. + * @result : 0, or an error code (which can be tested with ZSTD_isError()). + * Note 1 : Adding any prefix (including NULL) invalidates any previously set prefix or dictionary + * Note 2 : Prefix buffer is referenced. It **must** outlive decompression. + * Prefix buffer must remain unmodified up to the end of frame, + * reached when ZSTD_decompressStream() returns 0. + * Note 3 : By default, the prefix is treated as raw content (ZSTD_dct_rawContent). + * Use ZSTD_CCtx_refPrefix_advanced() to alter dictMode (Experimental section) + * Note 4 : Referencing a raw content prefix has almost no cpu nor memory cost. + * A full dictionary is more costly, as it requires building tables. + */ +ZSTDLIB_API size_t ZSTD_DCtx_refPrefix(ZSTD_DCtx* dctx, + const void* prefix, size_t prefixSize); + +/* === Memory management === */ + +/*! ZSTD_sizeof_*() : + * These functions give the _current_ memory usage of selected object. + * Note that object memory usage can evolve (increase or decrease) over time. */ +ZSTDLIB_API size_t ZSTD_sizeof_CCtx(const ZSTD_CCtx* cctx); +ZSTDLIB_API size_t ZSTD_sizeof_DCtx(const ZSTD_DCtx* dctx); +ZSTDLIB_API size_t ZSTD_sizeof_CStream(const ZSTD_CStream* zcs); +ZSTDLIB_API size_t ZSTD_sizeof_DStream(const ZSTD_DStream* zds); +ZSTDLIB_API size_t ZSTD_sizeof_CDict(const ZSTD_CDict* cdict); +ZSTDLIB_API size_t ZSTD_sizeof_DDict(const ZSTD_DDict* ddict); + +#endif /* ZSTD_H_235446 */ + + +/* ************************************************************************************** + * ADVANCED AND EXPERIMENTAL FUNCTIONS + **************************************************************************************** + * The definitions in the following section are considered experimental. + * They are provided for advanced scenarios. + * They should never be used with a dynamic library, as prototypes may change in the future. + * Use them only in association with static linking. + * ***************************************************************************************/ + +#if !defined(ZSTD_H_ZSTD_STATIC_LINKING_ONLY) +#define ZSTD_H_ZSTD_STATIC_LINKING_ONLY + +/* ************************************************************************************** + * experimental API (static linking only) + **************************************************************************************** + * The following symbols and constants + * are not planned to join "stable API" status in the near future. + * They can still change in future versions. + * Some of them are planned to remain in the static_only section indefinitely. + * Some of them might be removed in the future (especially when redundant with existing stable functions) + * ***************************************************************************************/ + +#define ZSTD_FRAMEHEADERSIZE_PREFIX(format) ((format) == ZSTD_f_zstd1 ? 5 : 1) /* minimum input size required to query frame header size */ +#define ZSTD_FRAMEHEADERSIZE_MIN(format) ((format) == ZSTD_f_zstd1 ? 6 : 2) +#define ZSTD_FRAMEHEADERSIZE_MAX 18 /* can be useful for static allocation */ +#define ZSTD_SKIPPABLEHEADERSIZE 8 + +/* compression parameter bounds */ +#define ZSTD_WINDOWLOG_MAX_32 30 +#define ZSTD_WINDOWLOG_MAX_64 31 +#define ZSTD_WINDOWLOG_MAX ((int)(sizeof(size_t) == 4 ? ZSTD_WINDOWLOG_MAX_32 : ZSTD_WINDOWLOG_MAX_64)) +#define ZSTD_WINDOWLOG_MIN 10 +#define ZSTD_HASHLOG_MAX ((ZSTD_WINDOWLOG_MAX < 30) ? ZSTD_WINDOWLOG_MAX : 30) +#define ZSTD_HASHLOG_MIN 6 +#define ZSTD_CHAINLOG_MAX_32 29 +#define ZSTD_CHAINLOG_MAX_64 30 +#define ZSTD_CHAINLOG_MAX ((int)(sizeof(size_t) == 4 ? ZSTD_CHAINLOG_MAX_32 : ZSTD_CHAINLOG_MAX_64)) +#define ZSTD_CHAINLOG_MIN ZSTD_HASHLOG_MIN +#define ZSTD_SEARCHLOG_MAX (ZSTD_WINDOWLOG_MAX-1) +#define ZSTD_SEARCHLOG_MIN 1 +#define ZSTD_MINMATCH_MAX 7 /* only for ZSTD_fast, other strategies are limited to 6 */ +#define ZSTD_MINMATCH_MIN 3 /* only for ZSTD_btopt+, faster strategies are limited to 4 */ +#define ZSTD_TARGETLENGTH_MAX ZSTD_BLOCKSIZE_MAX +#define ZSTD_TARGETLENGTH_MIN 0 /* note : comparing this constant to an unsigned results in a tautological test */ +#define ZSTD_STRATEGY_MIN ZSTD_fast +#define ZSTD_STRATEGY_MAX ZSTD_btultra2 + + +#define ZSTD_OVERLAPLOG_MIN 0 +#define ZSTD_OVERLAPLOG_MAX 9 + +#define ZSTD_WINDOWLOG_LIMIT_DEFAULT 27 /* by default, the streaming decoder will refuse any frame + * requiring larger than (1<<ZSTD_WINDOWLOG_LIMIT_DEFAULT) window size, + * to preserve host's memory from unreasonable requirements. + * This limit can be overridden using ZSTD_DCtx_setParameter(,ZSTD_d_windowLogMax,). + * The limit does not apply for one-pass decoders (such as ZSTD_decompress()), since no additional memory is allocated */ + + +/* LDM parameter bounds */ +#define ZSTD_LDM_HASHLOG_MIN ZSTD_HASHLOG_MIN +#define ZSTD_LDM_HASHLOG_MAX ZSTD_HASHLOG_MAX +#define ZSTD_LDM_MINMATCH_MIN 4 +#define ZSTD_LDM_MINMATCH_MAX 4096 +#define ZSTD_LDM_BUCKETSIZELOG_MIN 1 +#define ZSTD_LDM_BUCKETSIZELOG_MAX 8 +#define ZSTD_LDM_HASHRATELOG_MIN 0 +#define ZSTD_LDM_HASHRATELOG_MAX (ZSTD_WINDOWLOG_MAX - ZSTD_HASHLOG_MIN) + +/* Advanced parameter bounds */ +#define ZSTD_TARGETCBLOCKSIZE_MIN 64 +#define ZSTD_TARGETCBLOCKSIZE_MAX ZSTD_BLOCKSIZE_MAX +#define ZSTD_SRCSIZEHINT_MIN 0 +#define ZSTD_SRCSIZEHINT_MAX INT_MAX + +/* internal */ +#define ZSTD_HASHLOG3_MAX 17 + + +/* --- Advanced types --- */ + +typedef struct ZSTD_CCtx_params_s ZSTD_CCtx_params; + +typedef struct { + unsigned int offset; /* The offset of the match. (NOT the same as the offset code) + * If offset == 0 and matchLength == 0, this sequence represents the last + * literals in the block of litLength size. + */ + + unsigned int litLength; /* Literal length of the sequence. */ + unsigned int matchLength; /* Match length of the sequence. */ + + /* Note: Users of this API may provide a sequence with matchLength == litLength == offset == 0. + * In this case, we will treat the sequence as a marker for a block boundary. + */ + + unsigned int rep; /* Represents which repeat offset is represented by the field 'offset'. + * Ranges from [0, 3]. + * + * Repeat offsets are essentially previous offsets from previous sequences sorted in + * recency order. For more detail, see doc/zstd_compression_format.md + * + * If rep == 0, then 'offset' does not contain a repeat offset. + * If rep > 0: + * If litLength != 0: + * rep == 1 --> offset == repeat_offset_1 + * rep == 2 --> offset == repeat_offset_2 + * rep == 3 --> offset == repeat_offset_3 + * If litLength == 0: + * rep == 1 --> offset == repeat_offset_2 + * rep == 2 --> offset == repeat_offset_3 + * rep == 3 --> offset == repeat_offset_1 - 1 + * + * Note: This field is optional. ZSTD_generateSequences() will calculate the value of + * 'rep', but repeat offsets do not necessarily need to be calculated from an external + * sequence provider's perspective. For example, ZSTD_compressSequences() does not + * use this 'rep' field at all (as of now). + */ +} ZSTD_Sequence; + +typedef struct { + unsigned windowLog; /*< largest match distance : larger == more compression, more memory needed during decompression */ + unsigned chainLog; /*< fully searched segment : larger == more compression, slower, more memory (useless for fast) */ + unsigned hashLog; /*< dispatch table : larger == faster, more memory */ + unsigned searchLog; /*< nb of searches : larger == more compression, slower */ + unsigned minMatch; /*< match length searched : larger == faster decompression, sometimes less compression */ + unsigned targetLength; /*< acceptable match size for optimal parser (only) : larger == more compression, slower */ + ZSTD_strategy strategy; /*< see ZSTD_strategy definition above */ +} ZSTD_compressionParameters; + +typedef struct { + int contentSizeFlag; /*< 1: content size will be in frame header (when known) */ + int checksumFlag; /*< 1: generate a 32-bits checksum using XXH64 algorithm at end of frame, for error detection */ + int noDictIDFlag; /*< 1: no dictID will be saved into frame header (dictID is only useful for dictionary compression) */ +} ZSTD_frameParameters; + +typedef struct { + ZSTD_compressionParameters cParams; + ZSTD_frameParameters fParams; +} ZSTD_parameters; + +typedef enum { + ZSTD_dct_auto = 0, /* dictionary is "full" when starting with ZSTD_MAGIC_DICTIONARY, otherwise it is "rawContent" */ + ZSTD_dct_rawContent = 1, /* ensures dictionary is always loaded as rawContent, even if it starts with ZSTD_MAGIC_DICTIONARY */ + ZSTD_dct_fullDict = 2 /* refuses to load a dictionary if it does not respect Zstandard's specification, starting with ZSTD_MAGIC_DICTIONARY */ +} ZSTD_dictContentType_e; + +typedef enum { + ZSTD_dlm_byCopy = 0, /*< Copy dictionary content internally */ + ZSTD_dlm_byRef = 1 /*< Reference dictionary content -- the dictionary buffer must outlive its users. */ +} ZSTD_dictLoadMethod_e; + +typedef enum { + ZSTD_f_zstd1 = 0, /* zstd frame format, specified in zstd_compression_format.md (default) */ + ZSTD_f_zstd1_magicless = 1 /* Variant of zstd frame format, without initial 4-bytes magic number. + * Useful to save 4 bytes per generated frame. + * Decoder cannot recognise automatically this format, requiring this instruction. */ +} ZSTD_format_e; + +typedef enum { + /* Note: this enum controls ZSTD_d_forceIgnoreChecksum */ + ZSTD_d_validateChecksum = 0, + ZSTD_d_ignoreChecksum = 1 +} ZSTD_forceIgnoreChecksum_e; + +typedef enum { + /* Note: this enum controls ZSTD_d_refMultipleDDicts */ + ZSTD_rmd_refSingleDDict = 0, + ZSTD_rmd_refMultipleDDicts = 1 +} ZSTD_refMultipleDDicts_e; + +typedef enum { + /* Note: this enum and the behavior it controls are effectively internal + * implementation details of the compressor. They are expected to continue + * to evolve and should be considered only in the context of extremely + * advanced performance tuning. + * + * Zstd currently supports the use of a CDict in three ways: + * + * - The contents of the CDict can be copied into the working context. This + * means that the compression can search both the dictionary and input + * while operating on a single set of internal tables. This makes + * the compression faster per-byte of input. However, the initial copy of + * the CDict's tables incurs a fixed cost at the beginning of the + * compression. For small compressions (< 8 KB), that copy can dominate + * the cost of the compression. + * + * - The CDict's tables can be used in-place. In this model, compression is + * slower per input byte, because the compressor has to search two sets of + * tables. However, this model incurs no start-up cost (as long as the + * working context's tables can be reused). For small inputs, this can be + * faster than copying the CDict's tables. + * + * - The CDict's tables are not used at all, and instead we use the working + * context alone to reload the dictionary and use params based on the source + * size. See ZSTD_compress_insertDictionary() and ZSTD_compress_usingDict(). + * This method is effective when the dictionary sizes are very small relative + * to the input size, and the input size is fairly large to begin with. + * + * Zstd has a simple internal heuristic that selects which strategy to use + * at the beginning of a compression. However, if experimentation shows that + * Zstd is making poor choices, it is possible to override that choice with + * this enum. + */ + ZSTD_dictDefaultAttach = 0, /* Use the default heuristic. */ + ZSTD_dictForceAttach = 1, /* Never copy the dictionary. */ + ZSTD_dictForceCopy = 2, /* Always copy the dictionary. */ + ZSTD_dictForceLoad = 3 /* Always reload the dictionary */ +} ZSTD_dictAttachPref_e; + +typedef enum { + ZSTD_lcm_auto = 0, /*< Automatically determine the compression mode based on the compression level. + * Negative compression levels will be uncompressed, and positive compression + * levels will be compressed. */ + ZSTD_lcm_huffman = 1, /*< Always attempt Huffman compression. Uncompressed literals will still be + * emitted if Huffman compression is not profitable. */ + ZSTD_lcm_uncompressed = 2 /*< Always emit uncompressed literals. */ +} ZSTD_literalCompressionMode_e; + + +/* ************************************* +* Frame size functions +***************************************/ + +/*! ZSTD_findDecompressedSize() : + * `src` should point to the start of a series of ZSTD encoded and/or skippable frames + * `srcSize` must be the _exact_ size of this series + * (i.e. there should be a frame boundary at `src + srcSize`) + * @return : - decompressed size of all data in all successive frames + * - if the decompressed size cannot be determined: ZSTD_CONTENTSIZE_UNKNOWN + * - if an error occurred: ZSTD_CONTENTSIZE_ERROR + * + * note 1 : decompressed size is an optional field, that may not be present, especially in streaming mode. + * When `return==ZSTD_CONTENTSIZE_UNKNOWN`, data to decompress could be any size. + * In which case, it's necessary to use streaming mode to decompress data. + * note 2 : decompressed size is always present when compression is done with ZSTD_compress() + * note 3 : decompressed size can be very large (64-bits value), + * potentially larger than what local system can handle as a single memory segment. + * In which case, it's necessary to use streaming mode to decompress data. + * note 4 : If source is untrusted, decompressed size could be wrong or intentionally modified. + * Always ensure result fits within application's authorized limits. + * Each application can set its own limits. + * note 5 : ZSTD_findDecompressedSize handles multiple frames, and so it must traverse the input to + * read each contained frame header. This is fast as most of the data is skipped, + * however it does mean that all frame data must be present and valid. */ +ZSTDLIB_API unsigned long long ZSTD_findDecompressedSize(const void* src, size_t srcSize); + +/*! ZSTD_decompressBound() : + * `src` should point to the start of a series of ZSTD encoded and/or skippable frames + * `srcSize` must be the _exact_ size of this series + * (i.e. there should be a frame boundary at `src + srcSize`) + * @return : - upper-bound for the decompressed size of all data in all successive frames + * - if an error occurred: ZSTD_CONTENTSIZE_ERROR + * + * note 1 : an error can occur if `src` contains an invalid or incorrectly formatted frame. + * note 2 : the upper-bound is exact when the decompressed size field is available in every ZSTD encoded frame of `src`. + * in this case, `ZSTD_findDecompressedSize` and `ZSTD_decompressBound` return the same value. + * note 3 : when the decompressed size field isn't available, the upper-bound for that frame is calculated by: + * upper-bound = # blocks * min(128 KB, Window_Size) + */ +ZSTDLIB_API unsigned long long ZSTD_decompressBound(const void* src, size_t srcSize); + +/*! ZSTD_frameHeaderSize() : + * srcSize must be >= ZSTD_FRAMEHEADERSIZE_PREFIX. + * @return : size of the Frame Header, + * or an error code (if srcSize is too small) */ +ZSTDLIB_API size_t ZSTD_frameHeaderSize(const void* src, size_t srcSize); + +typedef enum { + ZSTD_sf_noBlockDelimiters = 0, /* Representation of ZSTD_Sequence has no block delimiters, sequences only */ + ZSTD_sf_explicitBlockDelimiters = 1 /* Representation of ZSTD_Sequence contains explicit block delimiters */ +} ZSTD_sequenceFormat_e; + +/*! ZSTD_generateSequences() : + * Generate sequences using ZSTD_compress2, given a source buffer. + * + * Each block will end with a dummy sequence + * with offset == 0, matchLength == 0, and litLength == length of last literals. + * litLength may be == 0, and if so, then the sequence of (of: 0 ml: 0 ll: 0) + * simply acts as a block delimiter. + * + * zc can be used to insert custom compression params. + * This function invokes ZSTD_compress2 + * + * The output of this function can be fed into ZSTD_compressSequences() with CCtx + * setting of ZSTD_c_blockDelimiters as ZSTD_sf_explicitBlockDelimiters + * @return : number of sequences generated + */ + +ZSTDLIB_API size_t ZSTD_generateSequences(ZSTD_CCtx* zc, ZSTD_Sequence* outSeqs, + size_t outSeqsSize, const void* src, size_t srcSize); + +/*! ZSTD_mergeBlockDelimiters() : + * Given an array of ZSTD_Sequence, remove all sequences that represent block delimiters/last literals + * by merging them into into the literals of the next sequence. + * + * As such, the final generated result has no explicit representation of block boundaries, + * and the final last literals segment is not represented in the sequences. + * + * The output of this function can be fed into ZSTD_compressSequences() with CCtx + * setting of ZSTD_c_blockDelimiters as ZSTD_sf_noBlockDelimiters + * @return : number of sequences left after merging + */ +ZSTDLIB_API size_t ZSTD_mergeBlockDelimiters(ZSTD_Sequence* sequences, size_t seqsSize); + +/*! ZSTD_compressSequences() : + * Compress an array of ZSTD_Sequence, generated from the original source buffer, into dst. + * If a dictionary is included, then the cctx should reference the dict. (see: ZSTD_CCtx_refCDict(), ZSTD_CCtx_loadDictionary(), etc.) + * The entire source is compressed into a single frame. + * + * The compression behavior changes based on cctx params. In particular: + * If ZSTD_c_blockDelimiters == ZSTD_sf_noBlockDelimiters, the array of ZSTD_Sequence is expected to contain + * no block delimiters (defined in ZSTD_Sequence). Block boundaries are roughly determined based on + * the block size derived from the cctx, and sequences may be split. This is the default setting. + * + * If ZSTD_c_blockDelimiters == ZSTD_sf_explicitBlockDelimiters, the array of ZSTD_Sequence is expected to contain + * block delimiters (defined in ZSTD_Sequence). Behavior is undefined if no block delimiters are provided. + * + * If ZSTD_c_validateSequences == 0, this function will blindly accept the sequences provided. Invalid sequences cause undefined + * behavior. If ZSTD_c_validateSequences == 1, then if sequence is invalid (see doc/zstd_compression_format.md for + * specifics regarding offset/matchlength requirements) then the function will bail out and return an error. + * + * In addition to the two adjustable experimental params, there are other important cctx params. + * - ZSTD_c_minMatch MUST be set as less than or equal to the smallest match generated by the match finder. It has a minimum value of ZSTD_MINMATCH_MIN. + * - ZSTD_c_compressionLevel accordingly adjusts the strength of the entropy coder, as it would in typical compression. + * - ZSTD_c_windowLog affects offset validation: this function will return an error at higher debug levels if a provided offset + * is larger than what the spec allows for a given window log and dictionary (if present). See: doc/zstd_compression_format.md + * + * Note: Repcodes are, as of now, always re-calculated within this function, so ZSTD_Sequence::rep is unused. + * Note 2: Once we integrate ability to ingest repcodes, the explicit block delims mode must respect those repcodes exactly, + * and cannot emit an RLE block that disagrees with the repcode history + * @return : final compressed size or a ZSTD error. + */ +ZSTDLIB_API size_t ZSTD_compressSequences(ZSTD_CCtx* const cctx, void* dst, size_t dstSize, + const ZSTD_Sequence* inSeqs, size_t inSeqsSize, + const void* src, size_t srcSize); + + +/*! ZSTD_writeSkippableFrame() : + * Generates a zstd skippable frame containing data given by src, and writes it to dst buffer. + * + * Skippable frames begin with a a 4-byte magic number. There are 16 possible choices of magic number, + * ranging from ZSTD_MAGIC_SKIPPABLE_START to ZSTD_MAGIC_SKIPPABLE_START+15. + * As such, the parameter magicVariant controls the exact skippable frame magic number variant used, so + * the magic number used will be ZSTD_MAGIC_SKIPPABLE_START + magicVariant. + * + * Returns an error if destination buffer is not large enough, if the source size is not representable + * with a 4-byte unsigned int, or if the parameter magicVariant is greater than 15 (and therefore invalid). + * + * @return : number of bytes written or a ZSTD error. + */ +ZSTDLIB_API size_t ZSTD_writeSkippableFrame(void* dst, size_t dstCapacity, + const void* src, size_t srcSize, unsigned magicVariant); + + +/* ************************************* +* Memory management +***************************************/ + +/*! ZSTD_estimate*() : + * These functions make it possible to estimate memory usage + * of a future {D,C}Ctx, before its creation. + * + * ZSTD_estimateCCtxSize() will provide a memory budget large enough + * for any compression level up to selected one. + * Note : Unlike ZSTD_estimateCStreamSize*(), this estimate + * does not include space for a window buffer. + * Therefore, the estimation is only guaranteed for single-shot compressions, not streaming. + * The estimate will assume the input may be arbitrarily large, + * which is the worst case. + * + * When srcSize can be bound by a known and rather "small" value, + * this fact can be used to provide a tighter estimation + * because the CCtx compression context will need less memory. + * This tighter estimation can be provided by more advanced functions + * ZSTD_estimateCCtxSize_usingCParams(), which can be used in tandem with ZSTD_getCParams(), + * and ZSTD_estimateCCtxSize_usingCCtxParams(), which can be used in tandem with ZSTD_CCtxParams_setParameter(). + * Both can be used to estimate memory using custom compression parameters and arbitrary srcSize limits. + * + * Note 2 : only single-threaded compression is supported. + * ZSTD_estimateCCtxSize_usingCCtxParams() will return an error code if ZSTD_c_nbWorkers is >= 1. + */ +ZSTDLIB_API size_t ZSTD_estimateCCtxSize(int compressionLevel); +ZSTDLIB_API size_t ZSTD_estimateCCtxSize_usingCParams(ZSTD_compressionParameters cParams); +ZSTDLIB_API size_t ZSTD_estimateCCtxSize_usingCCtxParams(const ZSTD_CCtx_params* params); +ZSTDLIB_API size_t ZSTD_estimateDCtxSize(void); + +/*! ZSTD_estimateCStreamSize() : + * ZSTD_estimateCStreamSize() will provide a budget large enough for any compression level up to selected one. + * It will also consider src size to be arbitrarily "large", which is worst case. + * If srcSize is known to always be small, ZSTD_estimateCStreamSize_usingCParams() can provide a tighter estimation. + * ZSTD_estimateCStreamSize_usingCParams() can be used in tandem with ZSTD_getCParams() to create cParams from compressionLevel. + * ZSTD_estimateCStreamSize_usingCCtxParams() can be used in tandem with ZSTD_CCtxParams_setParameter(). Only single-threaded compression is supported. This function will return an error code if ZSTD_c_nbWorkers is >= 1. + * Note : CStream size estimation is only correct for single-threaded compression. + * ZSTD_DStream memory budget depends on window Size. + * This information can be passed manually, using ZSTD_estimateDStreamSize, + * or deducted from a valid frame Header, using ZSTD_estimateDStreamSize_fromFrame(); + * Note : if streaming is init with function ZSTD_init?Stream_usingDict(), + * an internal ?Dict will be created, which additional size is not estimated here. + * In this case, get total size by adding ZSTD_estimate?DictSize */ +ZSTDLIB_API size_t ZSTD_estimateCStreamSize(int compressionLevel); +ZSTDLIB_API size_t ZSTD_estimateCStreamSize_usingCParams(ZSTD_compressionParameters cParams); +ZSTDLIB_API size_t ZSTD_estimateCStreamSize_usingCCtxParams(const ZSTD_CCtx_params* params); +ZSTDLIB_API size_t ZSTD_estimateDStreamSize(size_t windowSize); +ZSTDLIB_API size_t ZSTD_estimateDStreamSize_fromFrame(const void* src, size_t srcSize); + +/*! ZSTD_estimate?DictSize() : + * ZSTD_estimateCDictSize() will bet that src size is relatively "small", and content is copied, like ZSTD_createCDict(). + * ZSTD_estimateCDictSize_advanced() makes it possible to control compression parameters precisely, like ZSTD_createCDict_advanced(). + * Note : dictionaries created by reference (`ZSTD_dlm_byRef`) are logically smaller. + */ +ZSTDLIB_API size_t ZSTD_estimateCDictSize(size_t dictSize, int compressionLevel); +ZSTDLIB_API size_t ZSTD_estimateCDictSize_advanced(size_t dictSize, ZSTD_compressionParameters cParams, ZSTD_dictLoadMethod_e dictLoadMethod); +ZSTDLIB_API size_t ZSTD_estimateDDictSize(size_t dictSize, ZSTD_dictLoadMethod_e dictLoadMethod); + +/*! ZSTD_initStatic*() : + * Initialize an object using a pre-allocated fixed-size buffer. + * workspace: The memory area to emplace the object into. + * Provided pointer *must be 8-bytes aligned*. + * Buffer must outlive object. + * workspaceSize: Use ZSTD_estimate*Size() to determine + * how large workspace must be to support target scenario. + * @return : pointer to object (same address as workspace, just different type), + * or NULL if error (size too small, incorrect alignment, etc.) + * Note : zstd will never resize nor malloc() when using a static buffer. + * If the object requires more memory than available, + * zstd will just error out (typically ZSTD_error_memory_allocation). + * Note 2 : there is no corresponding "free" function. + * Since workspace is allocated externally, it must be freed externally too. + * Note 3 : cParams : use ZSTD_getCParams() to convert a compression level + * into its associated cParams. + * Limitation 1 : currently not compatible with internal dictionary creation, triggered by + * ZSTD_CCtx_loadDictionary(), ZSTD_initCStream_usingDict() or ZSTD_initDStream_usingDict(). + * Limitation 2 : static cctx currently not compatible with multi-threading. + * Limitation 3 : static dctx is incompatible with legacy support. + */ +ZSTDLIB_API ZSTD_CCtx* ZSTD_initStaticCCtx(void* workspace, size_t workspaceSize); +ZSTDLIB_API ZSTD_CStream* ZSTD_initStaticCStream(void* workspace, size_t workspaceSize); /*< same as ZSTD_initStaticCCtx() */ + +ZSTDLIB_API ZSTD_DCtx* ZSTD_initStaticDCtx(void* workspace, size_t workspaceSize); +ZSTDLIB_API ZSTD_DStream* ZSTD_initStaticDStream(void* workspace, size_t workspaceSize); /*< same as ZSTD_initStaticDCtx() */ + +ZSTDLIB_API const ZSTD_CDict* ZSTD_initStaticCDict( + void* workspace, size_t workspaceSize, + const void* dict, size_t dictSize, + ZSTD_dictLoadMethod_e dictLoadMethod, + ZSTD_dictContentType_e dictContentType, + ZSTD_compressionParameters cParams); + +ZSTDLIB_API const ZSTD_DDict* ZSTD_initStaticDDict( + void* workspace, size_t workspaceSize, + const void* dict, size_t dictSize, + ZSTD_dictLoadMethod_e dictLoadMethod, + ZSTD_dictContentType_e dictContentType); + + +/*! Custom memory allocation : + * These prototypes make it possible to pass your own allocation/free functions. + * ZSTD_customMem is provided at creation time, using ZSTD_create*_advanced() variants listed below. + * All allocation/free operations will be completed using these custom variants instead of regular <stdlib.h> ones. + */ +typedef void* (*ZSTD_allocFunction) (void* opaque, size_t size); +typedef void (*ZSTD_freeFunction) (void* opaque, void* address); +typedef struct { ZSTD_allocFunction customAlloc; ZSTD_freeFunction customFree; void* opaque; } ZSTD_customMem; +static +__attribute__((__unused__)) +ZSTD_customMem const ZSTD_defaultCMem = { NULL, NULL, NULL }; /*< this constant defers to stdlib's functions */ + +ZSTDLIB_API ZSTD_CCtx* ZSTD_createCCtx_advanced(ZSTD_customMem customMem); +ZSTDLIB_API ZSTD_CStream* ZSTD_createCStream_advanced(ZSTD_customMem customMem); +ZSTDLIB_API ZSTD_DCtx* ZSTD_createDCtx_advanced(ZSTD_customMem customMem); +ZSTDLIB_API ZSTD_DStream* ZSTD_createDStream_advanced(ZSTD_customMem customMem); + +ZSTDLIB_API ZSTD_CDict* ZSTD_createCDict_advanced(const void* dict, size_t dictSize, + ZSTD_dictLoadMethod_e dictLoadMethod, + ZSTD_dictContentType_e dictContentType, + ZSTD_compressionParameters cParams, + ZSTD_customMem customMem); + +/* ! Thread pool : + * These prototypes make it possible to share a thread pool among multiple compression contexts. + * This can limit resources for applications with multiple threads where each one uses + * a threaded compression mode (via ZSTD_c_nbWorkers parameter). + * ZSTD_createThreadPool creates a new thread pool with a given number of threads. + * Note that the lifetime of such pool must exist while being used. + * ZSTD_CCtx_refThreadPool assigns a thread pool to a context (use NULL argument value + * to use an internal thread pool). + * ZSTD_freeThreadPool frees a thread pool, accepts NULL pointer. + */ +typedef struct POOL_ctx_s ZSTD_threadPool; +ZSTDLIB_API ZSTD_threadPool* ZSTD_createThreadPool(size_t numThreads); +ZSTDLIB_API void ZSTD_freeThreadPool (ZSTD_threadPool* pool); /* accept NULL pointer */ +ZSTDLIB_API size_t ZSTD_CCtx_refThreadPool(ZSTD_CCtx* cctx, ZSTD_threadPool* pool); + + +/* + * This API is temporary and is expected to change or disappear in the future! + */ +ZSTDLIB_API ZSTD_CDict* ZSTD_createCDict_advanced2( + const void* dict, size_t dictSize, + ZSTD_dictLoadMethod_e dictLoadMethod, + ZSTD_dictContentType_e dictContentType, + const ZSTD_CCtx_params* cctxParams, + ZSTD_customMem customMem); + +ZSTDLIB_API ZSTD_DDict* ZSTD_createDDict_advanced( + const void* dict, size_t dictSize, + ZSTD_dictLoadMethod_e dictLoadMethod, + ZSTD_dictContentType_e dictContentType, + ZSTD_customMem customMem); + + +/* ************************************* +* Advanced compression functions +***************************************/ + +/*! ZSTD_createCDict_byReference() : + * Create a digested dictionary for compression + * Dictionary content is just referenced, not duplicated. + * As a consequence, `dictBuffer` **must** outlive CDict, + * and its content must remain unmodified throughout the lifetime of CDict. + * note: equivalent to ZSTD_createCDict_advanced(), with dictLoadMethod==ZSTD_dlm_byRef */ +ZSTDLIB_API ZSTD_CDict* ZSTD_createCDict_byReference(const void* dictBuffer, size_t dictSize, int compressionLevel); + +/*! ZSTD_getDictID_fromCDict() : + * Provides the dictID of the dictionary loaded into `cdict`. + * If @return == 0, the dictionary is not conformant to Zstandard specification, or empty. + * Non-conformant dictionaries can still be loaded, but as content-only dictionaries. */ +ZSTDLIB_API unsigned ZSTD_getDictID_fromCDict(const ZSTD_CDict* cdict); + +/*! ZSTD_getCParams() : + * @return ZSTD_compressionParameters structure for a selected compression level and estimated srcSize. + * `estimatedSrcSize` value is optional, select 0 if not known */ +ZSTDLIB_API ZSTD_compressionParameters ZSTD_getCParams(int compressionLevel, unsigned long long estimatedSrcSize, size_t dictSize); + +/*! ZSTD_getParams() : + * same as ZSTD_getCParams(), but @return a full `ZSTD_parameters` object instead of sub-component `ZSTD_compressionParameters`. + * All fields of `ZSTD_frameParameters` are set to default : contentSize=1, checksum=0, noDictID=0 */ +ZSTDLIB_API ZSTD_parameters ZSTD_getParams(int compressionLevel, unsigned long long estimatedSrcSize, size_t dictSize); + +/*! ZSTD_checkCParams() : + * Ensure param values remain within authorized range. + * @return 0 on success, or an error code (can be checked with ZSTD_isError()) */ +ZSTDLIB_API size_t ZSTD_checkCParams(ZSTD_compressionParameters params); + +/*! ZSTD_adjustCParams() : + * optimize params for a given `srcSize` and `dictSize`. + * `srcSize` can be unknown, in which case use ZSTD_CONTENTSIZE_UNKNOWN. + * `dictSize` must be `0` when there is no dictionary. + * cPar can be invalid : all parameters will be clamped within valid range in the @return struct. + * This function never fails (wide contract) */ +ZSTDLIB_API ZSTD_compressionParameters ZSTD_adjustCParams(ZSTD_compressionParameters cPar, unsigned long long srcSize, size_t dictSize); + +/*! ZSTD_compress_advanced() : + * Note : this function is now DEPRECATED. + * It can be replaced by ZSTD_compress2(), in combination with ZSTD_CCtx_setParameter() and other parameter setters. + * This prototype will be marked as deprecated and generate compilation warning on reaching v1.5.x */ +ZSTDLIB_API size_t ZSTD_compress_advanced(ZSTD_CCtx* cctx, + void* dst, size_t dstCapacity, + const void* src, size_t srcSize, + const void* dict,size_t dictSize, + ZSTD_parameters params); + +/*! ZSTD_compress_usingCDict_advanced() : + * Note : this function is now REDUNDANT. + * It can be replaced by ZSTD_compress2(), in combination with ZSTD_CCtx_loadDictionary() and other parameter setters. + * This prototype will be marked as deprecated and generate compilation warning in some future version */ +ZSTDLIB_API size_t ZSTD_compress_usingCDict_advanced(ZSTD_CCtx* cctx, + void* dst, size_t dstCapacity, + const void* src, size_t srcSize, + const ZSTD_CDict* cdict, + ZSTD_frameParameters fParams); + + +/*! ZSTD_CCtx_loadDictionary_byReference() : + * Same as ZSTD_CCtx_loadDictionary(), but dictionary content is referenced, instead of being copied into CCtx. + * It saves some memory, but also requires that `dict` outlives its usage within `cctx` */ +ZSTDLIB_API size_t ZSTD_CCtx_loadDictionary_byReference(ZSTD_CCtx* cctx, const void* dict, size_t dictSize); + +/*! ZSTD_CCtx_loadDictionary_advanced() : + * Same as ZSTD_CCtx_loadDictionary(), but gives finer control over + * how to load the dictionary (by copy ? by reference ?) + * and how to interpret it (automatic ? force raw mode ? full mode only ?) */ +ZSTDLIB_API size_t ZSTD_CCtx_loadDictionary_advanced(ZSTD_CCtx* cctx, const void* dict, size_t dictSize, ZSTD_dictLoadMethod_e dictLoadMethod, ZSTD_dictContentType_e dictContentType); + +/*! ZSTD_CCtx_refPrefix_advanced() : + * Same as ZSTD_CCtx_refPrefix(), but gives finer control over + * how to interpret prefix content (automatic ? force raw mode (default) ? full mode only ?) */ +ZSTDLIB_API size_t ZSTD_CCtx_refPrefix_advanced(ZSTD_CCtx* cctx, const void* prefix, size_t prefixSize, ZSTD_dictContentType_e dictContentType); + +/* === experimental parameters === */ +/* these parameters can be used with ZSTD_setParameter() + * they are not guaranteed to remain supported in the future */ + + /* Enables rsyncable mode, + * which makes compressed files more rsync friendly + * by adding periodic synchronization points to the compressed data. + * The target average block size is ZSTD_c_jobSize / 2. + * It's possible to modify the job size to increase or decrease + * the granularity of the synchronization point. + * Once the jobSize is smaller than the window size, + * it will result in compression ratio degradation. + * NOTE 1: rsyncable mode only works when multithreading is enabled. + * NOTE 2: rsyncable performs poorly in combination with long range mode, + * since it will decrease the effectiveness of synchronization points, + * though mileage may vary. + * NOTE 3: Rsyncable mode limits maximum compression speed to ~400 MB/s. + * If the selected compression level is already running significantly slower, + * the overall speed won't be significantly impacted. + */ + #define ZSTD_c_rsyncable ZSTD_c_experimentalParam1 + +/* Select a compression format. + * The value must be of type ZSTD_format_e. + * See ZSTD_format_e enum definition for details */ +#define ZSTD_c_format ZSTD_c_experimentalParam2 + +/* Force back-reference distances to remain < windowSize, + * even when referencing into Dictionary content (default:0) */ +#define ZSTD_c_forceMaxWindow ZSTD_c_experimentalParam3 + +/* Controls whether the contents of a CDict + * are used in place, or copied into the working context. + * Accepts values from the ZSTD_dictAttachPref_e enum. + * See the comments on that enum for an explanation of the feature. */ +#define ZSTD_c_forceAttachDict ZSTD_c_experimentalParam4 + +/* Controls how the literals are compressed (default is auto). + * The value must be of type ZSTD_literalCompressionMode_e. + * See ZSTD_literalCompressionMode_t enum definition for details. + */ +#define ZSTD_c_literalCompressionMode ZSTD_c_experimentalParam5 + +/* Tries to fit compressed block size to be around targetCBlockSize. + * No target when targetCBlockSize == 0. + * There is no guarantee on compressed block size (default:0) */ +#define ZSTD_c_targetCBlockSize ZSTD_c_experimentalParam6 + +/* User's best guess of source size. + * Hint is not valid when srcSizeHint == 0. + * There is no guarantee that hint is close to actual source size, + * but compression ratio may regress significantly if guess considerably underestimates */ +#define ZSTD_c_srcSizeHint ZSTD_c_experimentalParam7 + +/* Controls whether the new and experimental "dedicated dictionary search + * structure" can be used. This feature is still rough around the edges, be + * prepared for surprising behavior! + * + * How to use it: + * + * When using a CDict, whether to use this feature or not is controlled at + * CDict creation, and it must be set in a CCtxParams set passed into that + * construction (via ZSTD_createCDict_advanced2()). A compression will then + * use the feature or not based on how the CDict was constructed; the value of + * this param, set in the CCtx, will have no effect. + * + * However, when a dictionary buffer is passed into a CCtx, such as via + * ZSTD_CCtx_loadDictionary(), this param can be set on the CCtx to control + * whether the CDict that is created internally can use the feature or not. + * + * What it does: + * + * Normally, the internal data structures of the CDict are analogous to what + * would be stored in a CCtx after compressing the contents of a dictionary. + * To an approximation, a compression using a dictionary can then use those + * data structures to simply continue what is effectively a streaming + * compression where the simulated compression of the dictionary left off. + * Which is to say, the search structures in the CDict are normally the same + * format as in the CCtx. + * + * It is possible to do better, since the CDict is not like a CCtx: the search + * structures are written once during CDict creation, and then are only read + * after that, while the search structures in the CCtx are both read and + * written as the compression goes along. This means we can choose a search + * structure for the dictionary that is read-optimized. + * + * This feature enables the use of that different structure. + * + * Note that some of the members of the ZSTD_compressionParameters struct have + * different semantics and constraints in the dedicated search structure. It is + * highly recommended that you simply set a compression level in the CCtxParams + * you pass into the CDict creation call, and avoid messing with the cParams + * directly. + * + * Effects: + * + * This will only have any effect when the selected ZSTD_strategy + * implementation supports this feature. Currently, that's limited to + * ZSTD_greedy, ZSTD_lazy, and ZSTD_lazy2. + * + * Note that this means that the CDict tables can no longer be copied into the + * CCtx, so the dict attachment mode ZSTD_dictForceCopy will no longer be + * useable. The dictionary can only be attached or reloaded. + * + * In general, you should expect compression to be faster--sometimes very much + * so--and CDict creation to be slightly slower. Eventually, we will probably + * make this mode the default. + */ +#define ZSTD_c_enableDedicatedDictSearch ZSTD_c_experimentalParam8 + +/* ZSTD_c_stableInBuffer + * Experimental parameter. + * Default is 0 == disabled. Set to 1 to enable. + * + * Tells the compressor that the ZSTD_inBuffer will ALWAYS be the same + * between calls, except for the modifications that zstd makes to pos (the + * caller must not modify pos). This is checked by the compressor, and + * compression will fail if it ever changes. This means the only flush + * mode that makes sense is ZSTD_e_end, so zstd will error if ZSTD_e_end + * is not used. The data in the ZSTD_inBuffer in the range [src, src + pos) + * MUST not be modified during compression or you will get data corruption. + * + * When this flag is enabled zstd won't allocate an input window buffer, + * because the user guarantees it can reference the ZSTD_inBuffer until + * the frame is complete. But, it will still allocate an output buffer + * large enough to fit a block (see ZSTD_c_stableOutBuffer). This will also + * avoid the memcpy() from the input buffer to the input window buffer. + * + * NOTE: ZSTD_compressStream2() will error if ZSTD_e_end is not used. + * That means this flag cannot be used with ZSTD_compressStream(). + * + * NOTE: So long as the ZSTD_inBuffer always points to valid memory, using + * this flag is ALWAYS memory safe, and will never access out-of-bounds + * memory. However, compression WILL fail if you violate the preconditions. + * + * WARNING: The data in the ZSTD_inBuffer in the range [dst, dst + pos) MUST + * not be modified during compression or you will get data corruption. This + * is because zstd needs to reference data in the ZSTD_inBuffer to find + * matches. Normally zstd maintains its own window buffer for this purpose, + * but passing this flag tells zstd to use the user provided buffer. + */ +#define ZSTD_c_stableInBuffer ZSTD_c_experimentalParam9 + +/* ZSTD_c_stableOutBuffer + * Experimental parameter. + * Default is 0 == disabled. Set to 1 to enable. + * + * Tells he compressor that the ZSTD_outBuffer will not be resized between + * calls. Specifically: (out.size - out.pos) will never grow. This gives the + * compressor the freedom to say: If the compressed data doesn't fit in the + * output buffer then return ZSTD_error_dstSizeTooSmall. This allows us to + * always decompress directly into the output buffer, instead of decompressing + * into an internal buffer and copying to the output buffer. + * + * When this flag is enabled zstd won't allocate an output buffer, because + * it can write directly to the ZSTD_outBuffer. It will still allocate the + * input window buffer (see ZSTD_c_stableInBuffer). + * + * Zstd will check that (out.size - out.pos) never grows and return an error + * if it does. While not strictly necessary, this should prevent surprises. + */ +#define ZSTD_c_stableOutBuffer ZSTD_c_experimentalParam10 + +/* ZSTD_c_blockDelimiters + * Default is 0 == ZSTD_sf_noBlockDelimiters. + * + * For use with sequence compression API: ZSTD_compressSequences(). + * + * Designates whether or not the given array of ZSTD_Sequence contains block delimiters + * and last literals, which are defined as sequences with offset == 0 and matchLength == 0. + * See the definition of ZSTD_Sequence for more specifics. + */ +#define ZSTD_c_blockDelimiters ZSTD_c_experimentalParam11 + +/* ZSTD_c_validateSequences + * Default is 0 == disabled. Set to 1 to enable sequence validation. + * + * For use with sequence compression API: ZSTD_compressSequences(). + * Designates whether or not we validate sequences provided to ZSTD_compressSequences() + * during function execution. + * + * Without validation, providing a sequence that does not conform to the zstd spec will cause + * undefined behavior, and may produce a corrupted block. + * + * With validation enabled, a if sequence is invalid (see doc/zstd_compression_format.md for + * specifics regarding offset/matchlength requirements) then the function will bail out and + * return an error. + * + */ +#define ZSTD_c_validateSequences ZSTD_c_experimentalParam12 + +/*! ZSTD_CCtx_getParameter() : + * Get the requested compression parameter value, selected by enum ZSTD_cParameter, + * and store it into int* value. + * @return : 0, or an error code (which can be tested with ZSTD_isError()). + */ +ZSTDLIB_API size_t ZSTD_CCtx_getParameter(const ZSTD_CCtx* cctx, ZSTD_cParameter param, int* value); + + +/*! ZSTD_CCtx_params : + * Quick howto : + * - ZSTD_createCCtxParams() : Create a ZSTD_CCtx_params structure + * - ZSTD_CCtxParams_setParameter() : Push parameters one by one into + * an existing ZSTD_CCtx_params structure. + * This is similar to + * ZSTD_CCtx_setParameter(). + * - ZSTD_CCtx_setParametersUsingCCtxParams() : Apply parameters to + * an existing CCtx. + * These parameters will be applied to + * all subsequent frames. + * - ZSTD_compressStream2() : Do compression using the CCtx. + * - ZSTD_freeCCtxParams() : Free the memory, accept NULL pointer. + * + * This can be used with ZSTD_estimateCCtxSize_advanced_usingCCtxParams() + * for static allocation of CCtx for single-threaded compression. + */ +ZSTDLIB_API ZSTD_CCtx_params* ZSTD_createCCtxParams(void); +ZSTDLIB_API size_t ZSTD_freeCCtxParams(ZSTD_CCtx_params* params); /* accept NULL pointer */ + +/*! ZSTD_CCtxParams_reset() : + * Reset params to default values. + */ +ZSTDLIB_API size_t ZSTD_CCtxParams_reset(ZSTD_CCtx_params* params); + +/*! ZSTD_CCtxParams_init() : + * Initializes the compression parameters of cctxParams according to + * compression level. All other parameters are reset to their default values. + */ +ZSTDLIB_API size_t ZSTD_CCtxParams_init(ZSTD_CCtx_params* cctxParams, int compressionLevel); + +/*! ZSTD_CCtxParams_init_advanced() : + * Initializes the compression and frame parameters of cctxParams according to + * params. All other parameters are reset to their default values. + */ +ZSTDLIB_API size_t ZSTD_CCtxParams_init_advanced(ZSTD_CCtx_params* cctxParams, ZSTD_parameters params); + +/*! ZSTD_CCtxParams_setParameter() : + * Similar to ZSTD_CCtx_setParameter. + * Set one compression parameter, selected by enum ZSTD_cParameter. + * Parameters must be applied to a ZSTD_CCtx using + * ZSTD_CCtx_setParametersUsingCCtxParams(). + * @result : a code representing success or failure (which can be tested with + * ZSTD_isError()). + */ +ZSTDLIB_API size_t ZSTD_CCtxParams_setParameter(ZSTD_CCtx_params* params, ZSTD_cParameter param, int value); + +/*! ZSTD_CCtxParams_getParameter() : + * Similar to ZSTD_CCtx_getParameter. + * Get the requested value of one compression parameter, selected by enum ZSTD_cParameter. + * @result : 0, or an error code (which can be tested with ZSTD_isError()). + */ +ZSTDLIB_API size_t ZSTD_CCtxParams_getParameter(const ZSTD_CCtx_params* params, ZSTD_cParameter param, int* value); + +/*! ZSTD_CCtx_setParametersUsingCCtxParams() : + * Apply a set of ZSTD_CCtx_params to the compression context. + * This can be done even after compression is started, + * if nbWorkers==0, this will have no impact until a new compression is started. + * if nbWorkers>=1, new parameters will be picked up at next job, + * with a few restrictions (windowLog, pledgedSrcSize, nbWorkers, jobSize, and overlapLog are not updated). + */ +ZSTDLIB_API size_t ZSTD_CCtx_setParametersUsingCCtxParams( + ZSTD_CCtx* cctx, const ZSTD_CCtx_params* params); + +/*! ZSTD_compressStream2_simpleArgs() : + * Same as ZSTD_compressStream2(), + * but using only integral types as arguments. + * This variant might be helpful for binders from dynamic languages + * which have troubles handling structures containing memory pointers. + */ +ZSTDLIB_API size_t ZSTD_compressStream2_simpleArgs ( + ZSTD_CCtx* cctx, + void* dst, size_t dstCapacity, size_t* dstPos, + const void* src, size_t srcSize, size_t* srcPos, + ZSTD_EndDirective endOp); + + +/* ************************************* +* Advanced decompression functions +***************************************/ + +/*! ZSTD_isFrame() : + * Tells if the content of `buffer` starts with a valid Frame Identifier. + * Note : Frame Identifier is 4 bytes. If `size < 4`, @return will always be 0. + * Note 2 : Legacy Frame Identifiers are considered valid only if Legacy Support is enabled. + * Note 3 : Skippable Frame Identifiers are considered valid. */ +ZSTDLIB_API unsigned ZSTD_isFrame(const void* buffer, size_t size); + +/*! ZSTD_createDDict_byReference() : + * Create a digested dictionary, ready to start decompression operation without startup delay. + * Dictionary content is referenced, and therefore stays in dictBuffer. + * It is important that dictBuffer outlives DDict, + * it must remain read accessible throughout the lifetime of DDict */ +ZSTDLIB_API ZSTD_DDict* ZSTD_createDDict_byReference(const void* dictBuffer, size_t dictSize); + +/*! ZSTD_DCtx_loadDictionary_byReference() : + * Same as ZSTD_DCtx_loadDictionary(), + * but references `dict` content instead of copying it into `dctx`. + * This saves memory if `dict` remains around., + * However, it's imperative that `dict` remains accessible (and unmodified) while being used, so it must outlive decompression. */ +ZSTDLIB_API size_t ZSTD_DCtx_loadDictionary_byReference(ZSTD_DCtx* dctx, const void* dict, size_t dictSize); + +/*! ZSTD_DCtx_loadDictionary_advanced() : + * Same as ZSTD_DCtx_loadDictionary(), + * but gives direct control over + * how to load the dictionary (by copy ? by reference ?) + * and how to interpret it (automatic ? force raw mode ? full mode only ?). */ +ZSTDLIB_API size_t ZSTD_DCtx_loadDictionary_advanced(ZSTD_DCtx* dctx, const void* dict, size_t dictSize, ZSTD_dictLoadMethod_e dictLoadMethod, ZSTD_dictContentType_e dictContentType); + +/*! ZSTD_DCtx_refPrefix_advanced() : + * Same as ZSTD_DCtx_refPrefix(), but gives finer control over + * how to interpret prefix content (automatic ? force raw mode (default) ? full mode only ?) */ +ZSTDLIB_API size_t ZSTD_DCtx_refPrefix_advanced(ZSTD_DCtx* dctx, const void* prefix, size_t prefixSize, ZSTD_dictContentType_e dictContentType); + +/*! ZSTD_DCtx_setMaxWindowSize() : + * Refuses allocating internal buffers for frames requiring a window size larger than provided limit. + * This protects a decoder context from reserving too much memory for itself (potential attack scenario). + * This parameter is only useful in streaming mode, since no internal buffer is allocated in single-pass mode. + * By default, a decompression context accepts all window sizes <= (1 << ZSTD_WINDOWLOG_LIMIT_DEFAULT) + * @return : 0, or an error code (which can be tested using ZSTD_isError()). + */ +ZSTDLIB_API size_t ZSTD_DCtx_setMaxWindowSize(ZSTD_DCtx* dctx, size_t maxWindowSize); + +/*! ZSTD_DCtx_getParameter() : + * Get the requested decompression parameter value, selected by enum ZSTD_dParameter, + * and store it into int* value. + * @return : 0, or an error code (which can be tested with ZSTD_isError()). + */ +ZSTDLIB_API size_t ZSTD_DCtx_getParameter(ZSTD_DCtx* dctx, ZSTD_dParameter param, int* value); + +/* ZSTD_d_format + * experimental parameter, + * allowing selection between ZSTD_format_e input compression formats + */ +#define ZSTD_d_format ZSTD_d_experimentalParam1 +/* ZSTD_d_stableOutBuffer + * Experimental parameter. + * Default is 0 == disabled. Set to 1 to enable. + * + * Tells the decompressor that the ZSTD_outBuffer will ALWAYS be the same + * between calls, except for the modifications that zstd makes to pos (the + * caller must not modify pos). This is checked by the decompressor, and + * decompression will fail if it ever changes. Therefore the ZSTD_outBuffer + * MUST be large enough to fit the entire decompressed frame. This will be + * checked when the frame content size is known. The data in the ZSTD_outBuffer + * in the range [dst, dst + pos) MUST not be modified during decompression + * or you will get data corruption. + * + * When this flags is enabled zstd won't allocate an output buffer, because + * it can write directly to the ZSTD_outBuffer, but it will still allocate + * an input buffer large enough to fit any compressed block. This will also + * avoid the memcpy() from the internal output buffer to the ZSTD_outBuffer. + * If you need to avoid the input buffer allocation use the buffer-less + * streaming API. + * + * NOTE: So long as the ZSTD_outBuffer always points to valid memory, using + * this flag is ALWAYS memory safe, and will never access out-of-bounds + * memory. However, decompression WILL fail if you violate the preconditions. + * + * WARNING: The data in the ZSTD_outBuffer in the range [dst, dst + pos) MUST + * not be modified during decompression or you will get data corruption. This + * is because zstd needs to reference data in the ZSTD_outBuffer to regenerate + * matches. Normally zstd maintains its own buffer for this purpose, but passing + * this flag tells zstd to use the user provided buffer. + */ +#define ZSTD_d_stableOutBuffer ZSTD_d_experimentalParam2 + +/* ZSTD_d_forceIgnoreChecksum + * Experimental parameter. + * Default is 0 == disabled. Set to 1 to enable + * + * Tells the decompressor to skip checksum validation during decompression, regardless + * of whether checksumming was specified during compression. This offers some + * slight performance benefits, and may be useful for debugging. + * Param has values of type ZSTD_forceIgnoreChecksum_e + */ +#define ZSTD_d_forceIgnoreChecksum ZSTD_d_experimentalParam3 + +/* ZSTD_d_refMultipleDDicts + * Experimental parameter. + * Default is 0 == disabled. Set to 1 to enable + * + * If enabled and dctx is allocated on the heap, then additional memory will be allocated + * to store references to multiple ZSTD_DDict. That is, multiple calls of ZSTD_refDDict() + * using a given ZSTD_DCtx, rather than overwriting the previous DDict reference, will instead + * store all references. At decompression time, the appropriate dictID is selected + * from the set of DDicts based on the dictID in the frame. + * + * Usage is simply calling ZSTD_refDDict() on multiple dict buffers. + * + * Param has values of byte ZSTD_refMultipleDDicts_e + * + * WARNING: Enabling this parameter and calling ZSTD_DCtx_refDDict(), will trigger memory + * allocation for the hash table. ZSTD_freeDCtx() also frees this memory. + * Memory is allocated as per ZSTD_DCtx::customMem. + * + * Although this function allocates memory for the table, the user is still responsible for + * memory management of the underlying ZSTD_DDict* themselves. + */ +#define ZSTD_d_refMultipleDDicts ZSTD_d_experimentalParam4 + + +/*! ZSTD_DCtx_setFormat() : + * Instruct the decoder context about what kind of data to decode next. + * This instruction is mandatory to decode data without a fully-formed header, + * such ZSTD_f_zstd1_magicless for example. + * @return : 0, or an error code (which can be tested using ZSTD_isError()). */ +ZSTDLIB_API size_t ZSTD_DCtx_setFormat(ZSTD_DCtx* dctx, ZSTD_format_e format); + +/*! ZSTD_decompressStream_simpleArgs() : + * Same as ZSTD_decompressStream(), + * but using only integral types as arguments. + * This can be helpful for binders from dynamic languages + * which have troubles handling structures containing memory pointers. + */ +ZSTDLIB_API size_t ZSTD_decompressStream_simpleArgs ( + ZSTD_DCtx* dctx, + void* dst, size_t dstCapacity, size_t* dstPos, + const void* src, size_t srcSize, size_t* srcPos); + + +/* ****************************************************************** +* Advanced streaming functions +* Warning : most of these functions are now redundant with the Advanced API. +* Once Advanced API reaches "stable" status, +* redundant functions will be deprecated, and then at some point removed. +********************************************************************/ + +/*===== Advanced Streaming compression functions =====*/ + +/*! ZSTD_initCStream_srcSize() : + * This function is deprecated, and equivalent to: + * ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only); + * ZSTD_CCtx_refCDict(zcs, NULL); // clear the dictionary (if any) + * ZSTD_CCtx_setParameter(zcs, ZSTD_c_compressionLevel, compressionLevel); + * ZSTD_CCtx_setPledgedSrcSize(zcs, pledgedSrcSize); + * + * pledgedSrcSize must be correct. If it is not known at init time, use + * ZSTD_CONTENTSIZE_UNKNOWN. Note that, for compatibility with older programs, + * "0" also disables frame content size field. It may be enabled in the future. + * Note : this prototype will be marked as deprecated and generate compilation warnings on reaching v1.5.x + */ +ZSTDLIB_API size_t +ZSTD_initCStream_srcSize(ZSTD_CStream* zcs, + int compressionLevel, + unsigned long long pledgedSrcSize); + +/*! ZSTD_initCStream_usingDict() : + * This function is deprecated, and is equivalent to: + * ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only); + * ZSTD_CCtx_setParameter(zcs, ZSTD_c_compressionLevel, compressionLevel); + * ZSTD_CCtx_loadDictionary(zcs, dict, dictSize); + * + * Creates of an internal CDict (incompatible with static CCtx), except if + * dict == NULL or dictSize < 8, in which case no dict is used. + * Note: dict is loaded with ZSTD_dct_auto (treated as a full zstd dictionary if + * it begins with ZSTD_MAGIC_DICTIONARY, else as raw content) and ZSTD_dlm_byCopy. + * Note : this prototype will be marked as deprecated and generate compilation warnings on reaching v1.5.x + */ +ZSTDLIB_API size_t +ZSTD_initCStream_usingDict(ZSTD_CStream* zcs, + const void* dict, size_t dictSize, + int compressionLevel); + +/*! ZSTD_initCStream_advanced() : + * This function is deprecated, and is approximately equivalent to: + * ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only); + * // Pseudocode: Set each zstd parameter and leave the rest as-is. + * for ((param, value) : params) { + * ZSTD_CCtx_setParameter(zcs, param, value); + * } + * ZSTD_CCtx_setPledgedSrcSize(zcs, pledgedSrcSize); + * ZSTD_CCtx_loadDictionary(zcs, dict, dictSize); + * + * dict is loaded with ZSTD_dct_auto and ZSTD_dlm_byCopy. + * pledgedSrcSize must be correct. + * If srcSize is not known at init time, use value ZSTD_CONTENTSIZE_UNKNOWN. + * Note : this prototype will be marked as deprecated and generate compilation warnings on reaching v1.5.x + */ +ZSTDLIB_API size_t +ZSTD_initCStream_advanced(ZSTD_CStream* zcs, + const void* dict, size_t dictSize, + ZSTD_parameters params, + unsigned long long pledgedSrcSize); + +/*! ZSTD_initCStream_usingCDict() : + * This function is deprecated, and equivalent to: + * ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only); + * ZSTD_CCtx_refCDict(zcs, cdict); + * + * note : cdict will just be referenced, and must outlive compression session + * Note : this prototype will be marked as deprecated and generate compilation warnings on reaching v1.5.x + */ +ZSTDLIB_API size_t ZSTD_initCStream_usingCDict(ZSTD_CStream* zcs, const ZSTD_CDict* cdict); + +/*! ZSTD_initCStream_usingCDict_advanced() : + * This function is DEPRECATED, and is approximately equivalent to: + * ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only); + * // Pseudocode: Set each zstd frame parameter and leave the rest as-is. + * for ((fParam, value) : fParams) { + * ZSTD_CCtx_setParameter(zcs, fParam, value); + * } + * ZSTD_CCtx_setPledgedSrcSize(zcs, pledgedSrcSize); + * ZSTD_CCtx_refCDict(zcs, cdict); + * + * same as ZSTD_initCStream_usingCDict(), with control over frame parameters. + * pledgedSrcSize must be correct. If srcSize is not known at init time, use + * value ZSTD_CONTENTSIZE_UNKNOWN. + * Note : this prototype will be marked as deprecated and generate compilation warnings on reaching v1.5.x + */ +ZSTDLIB_API size_t +ZSTD_initCStream_usingCDict_advanced(ZSTD_CStream* zcs, + const ZSTD_CDict* cdict, + ZSTD_frameParameters fParams, + unsigned long long pledgedSrcSize); + +/*! ZSTD_resetCStream() : + * This function is deprecated, and is equivalent to: + * ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only); + * ZSTD_CCtx_setPledgedSrcSize(zcs, pledgedSrcSize); + * + * start a new frame, using same parameters from previous frame. + * This is typically useful to skip dictionary loading stage, since it will re-use it in-place. + * Note that zcs must be init at least once before using ZSTD_resetCStream(). + * If pledgedSrcSize is not known at reset time, use macro ZSTD_CONTENTSIZE_UNKNOWN. + * If pledgedSrcSize > 0, its value must be correct, as it will be written in header, and controlled at the end. + * For the time being, pledgedSrcSize==0 is interpreted as "srcSize unknown" for compatibility with older programs, + * but it will change to mean "empty" in future version, so use macro ZSTD_CONTENTSIZE_UNKNOWN instead. + * @return : 0, or an error code (which can be tested using ZSTD_isError()) + * Note : this prototype will be marked as deprecated and generate compilation warnings on reaching v1.5.x + */ +ZSTDLIB_API size_t ZSTD_resetCStream(ZSTD_CStream* zcs, unsigned long long pledgedSrcSize); + + +typedef struct { + unsigned long long ingested; /* nb input bytes read and buffered */ + unsigned long long consumed; /* nb input bytes actually compressed */ + unsigned long long produced; /* nb of compressed bytes generated and buffered */ + unsigned long long flushed; /* nb of compressed bytes flushed : not provided; can be tracked from caller side */ + unsigned currentJobID; /* MT only : latest started job nb */ + unsigned nbActiveWorkers; /* MT only : nb of workers actively compressing at probe time */ +} ZSTD_frameProgression; + +/* ZSTD_getFrameProgression() : + * tells how much data has been ingested (read from input) + * consumed (input actually compressed) and produced (output) for current frame. + * Note : (ingested - consumed) is amount of input data buffered internally, not yet compressed. + * Aggregates progression inside active worker threads. + */ +ZSTDLIB_API ZSTD_frameProgression ZSTD_getFrameProgression(const ZSTD_CCtx* cctx); + +/*! ZSTD_toFlushNow() : + * Tell how many bytes are ready to be flushed immediately. + * Useful for multithreading scenarios (nbWorkers >= 1). + * Probe the oldest active job, defined as oldest job not yet entirely flushed, + * and check its output buffer. + * @return : amount of data stored in oldest job and ready to be flushed immediately. + * if @return == 0, it means either : + * + there is no active job (could be checked with ZSTD_frameProgression()), or + * + oldest job is still actively compressing data, + * but everything it has produced has also been flushed so far, + * therefore flush speed is limited by production speed of oldest job + * irrespective of the speed of concurrent (and newer) jobs. + */ +ZSTDLIB_API size_t ZSTD_toFlushNow(ZSTD_CCtx* cctx); + + +/*===== Advanced Streaming decompression functions =====*/ + +/*! + * This function is deprecated, and is equivalent to: + * + * ZSTD_DCtx_reset(zds, ZSTD_reset_session_only); + * ZSTD_DCtx_loadDictionary(zds, dict, dictSize); + * + * note: no dictionary will be used if dict == NULL or dictSize < 8 + * Note : this prototype will be marked as deprecated and generate compilation warnings on reaching v1.5.x + */ +ZSTDLIB_API size_t ZSTD_initDStream_usingDict(ZSTD_DStream* zds, const void* dict, size_t dictSize); + +/*! + * This function is deprecated, and is equivalent to: + * + * ZSTD_DCtx_reset(zds, ZSTD_reset_session_only); + * ZSTD_DCtx_refDDict(zds, ddict); + * + * note : ddict is referenced, it must outlive decompression session + * Note : this prototype will be marked as deprecated and generate compilation warnings on reaching v1.5.x + */ +ZSTDLIB_API size_t ZSTD_initDStream_usingDDict(ZSTD_DStream* zds, const ZSTD_DDict* ddict); + +/*! + * This function is deprecated, and is equivalent to: + * + * ZSTD_DCtx_reset(zds, ZSTD_reset_session_only); + * + * re-use decompression parameters from previous init; saves dictionary loading + * Note : this prototype will be marked as deprecated and generate compilation warnings on reaching v1.5.x + */ +ZSTDLIB_API size_t ZSTD_resetDStream(ZSTD_DStream* zds); + + +/* ******************************************************************* +* Buffer-less and synchronous inner streaming functions +* +* This is an advanced API, giving full control over buffer management, for users which need direct control over memory. +* But it's also a complex one, with several restrictions, documented below. +* Prefer normal streaming API for an easier experience. +********************************************************************* */ + +/* + Buffer-less streaming compression (synchronous mode) + + A ZSTD_CCtx object is required to track streaming operations. + Use ZSTD_createCCtx() / ZSTD_freeCCtx() to manage resource. + ZSTD_CCtx object can be re-used multiple times within successive compression operations. + + Start by initializing a context. + Use ZSTD_compressBegin(), or ZSTD_compressBegin_usingDict() for dictionary compression, + or ZSTD_compressBegin_advanced(), for finer parameter control. + It's also possible to duplicate a reference context which has already been initialized, using ZSTD_copyCCtx() + + Then, consume your input using ZSTD_compressContinue(). + There are some important considerations to keep in mind when using this advanced function : + - ZSTD_compressContinue() has no internal buffer. It uses externally provided buffers only. + - Interface is synchronous : input is consumed entirely and produces 1+ compressed blocks. + - Caller must ensure there is enough space in `dst` to store compressed data under worst case scenario. + Worst case evaluation is provided by ZSTD_compressBound(). + ZSTD_compressContinue() doesn't guarantee recover after a failed compression. + - ZSTD_compressContinue() presumes prior input ***is still accessible and unmodified*** (up to maximum distance size, see WindowLog). + It remembers all previous contiguous blocks, plus one separated memory segment (which can itself consists of multiple contiguous blocks) + - ZSTD_compressContinue() detects that prior input has been overwritten when `src` buffer overlaps. + In which case, it will "discard" the relevant memory section from its history. + + Finish a frame with ZSTD_compressEnd(), which will write the last block(s) and optional checksum. + It's possible to use srcSize==0, in which case, it will write a final empty block to end the frame. + Without last block mark, frames are considered unfinished (hence corrupted) by compliant decoders. + + `ZSTD_CCtx` object can be re-used (ZSTD_compressBegin()) to compress again. +*/ + +/*===== Buffer-less streaming compression functions =====*/ +ZSTDLIB_API size_t ZSTD_compressBegin(ZSTD_CCtx* cctx, int compressionLevel); +ZSTDLIB_API size_t ZSTD_compressBegin_usingDict(ZSTD_CCtx* cctx, const void* dict, size_t dictSize, int compressionLevel); +ZSTDLIB_API size_t ZSTD_compressBegin_advanced(ZSTD_CCtx* cctx, const void* dict, size_t dictSize, ZSTD_parameters params, unsigned long long pledgedSrcSize); /*< pledgedSrcSize : If srcSize is not known at init time, use ZSTD_CONTENTSIZE_UNKNOWN */ +ZSTDLIB_API size_t ZSTD_compressBegin_usingCDict(ZSTD_CCtx* cctx, const ZSTD_CDict* cdict); /*< note: fails if cdict==NULL */ +ZSTDLIB_API size_t ZSTD_compressBegin_usingCDict_advanced(ZSTD_CCtx* const cctx, const ZSTD_CDict* const cdict, ZSTD_frameParameters const fParams, unsigned long long const pledgedSrcSize); /* compression parameters are already set within cdict. pledgedSrcSize must be correct. If srcSize is not known, use macro ZSTD_CONTENTSIZE_UNKNOWN */ +ZSTDLIB_API size_t ZSTD_copyCCtx(ZSTD_CCtx* cctx, const ZSTD_CCtx* preparedCCtx, unsigned long long pledgedSrcSize); /*< note: if pledgedSrcSize is not known, use ZSTD_CONTENTSIZE_UNKNOWN */ + +ZSTDLIB_API size_t ZSTD_compressContinue(ZSTD_CCtx* cctx, void* dst, size_t dstCapacity, const void* src, size_t srcSize); +ZSTDLIB_API size_t ZSTD_compressEnd(ZSTD_CCtx* cctx, void* dst, size_t dstCapacity, const void* src, size_t srcSize); + + +/* + Buffer-less streaming decompression (synchronous mode) + + A ZSTD_DCtx object is required to track streaming operations. + Use ZSTD_createDCtx() / ZSTD_freeDCtx() to manage it. + A ZSTD_DCtx object can be re-used multiple times. + + First typical operation is to retrieve frame parameters, using ZSTD_getFrameHeader(). + Frame header is extracted from the beginning of compressed frame, so providing only the frame's beginning is enough. + Data fragment must be large enough to ensure successful decoding. + `ZSTD_frameHeaderSize_max` bytes is guaranteed to always be large enough. + @result : 0 : successful decoding, the `ZSTD_frameHeader` structure is correctly filled. + >0 : `srcSize` is too small, please provide at least @result bytes on next attempt. + errorCode, which can be tested using ZSTD_isError(). + + It fills a ZSTD_frameHeader structure with important information to correctly decode the frame, + such as the dictionary ID, content size, or maximum back-reference distance (`windowSize`). + Note that these values could be wrong, either because of data corruption, or because a 3rd party deliberately spoofs false information. + As a consequence, check that values remain within valid application range. + For example, do not allocate memory blindly, check that `windowSize` is within expectation. + Each application can set its own limits, depending on local restrictions. + For extended interoperability, it is recommended to support `windowSize` of at least 8 MB. + + ZSTD_decompressContinue() needs previous data blocks during decompression, up to `windowSize` bytes. + ZSTD_decompressContinue() is very sensitive to contiguity, + if 2 blocks don't follow each other, make sure that either the compressor breaks contiguity at the same place, + or that previous contiguous segment is large enough to properly handle maximum back-reference distance. + There are multiple ways to guarantee this condition. + + The most memory efficient way is to use a round buffer of sufficient size. + Sufficient size is determined by invoking ZSTD_decodingBufferSize_min(), + which can @return an error code if required value is too large for current system (in 32-bits mode). + In a round buffer methodology, ZSTD_decompressContinue() decompresses each block next to previous one, + up to the moment there is not enough room left in the buffer to guarantee decoding another full block, + which maximum size is provided in `ZSTD_frameHeader` structure, field `blockSizeMax`. + At which point, decoding can resume from the beginning of the buffer. + Note that already decoded data stored in the buffer should be flushed before being overwritten. + + There are alternatives possible, for example using two or more buffers of size `windowSize` each, though they consume more memory. + + Finally, if you control the compression process, you can also ignore all buffer size rules, + as long as the encoder and decoder progress in "lock-step", + aka use exactly the same buffer sizes, break contiguity at the same place, etc. + + Once buffers are setup, start decompression, with ZSTD_decompressBegin(). + If decompression requires a dictionary, use ZSTD_decompressBegin_usingDict() or ZSTD_decompressBegin_usingDDict(). + + Then use ZSTD_nextSrcSizeToDecompress() and ZSTD_decompressContinue() alternatively. + ZSTD_nextSrcSizeToDecompress() tells how many bytes to provide as 'srcSize' to ZSTD_decompressContinue(). + ZSTD_decompressContinue() requires this _exact_ amount of bytes, or it will fail. + + @result of ZSTD_decompressContinue() is the number of bytes regenerated within 'dst' (necessarily <= dstCapacity). + It can be zero : it just means ZSTD_decompressContinue() has decoded some metadata item. + It can also be an error code, which can be tested with ZSTD_isError(). + + A frame is fully decoded when ZSTD_nextSrcSizeToDecompress() returns zero. + Context can then be reset to start a new decompression. + + Note : it's possible to know if next input to present is a header or a block, using ZSTD_nextInputType(). + This information is not required to properly decode a frame. + + == Special case : skippable frames == + + Skippable frames allow integration of user-defined data into a flow of concatenated frames. + Skippable frames will be ignored (skipped) by decompressor. + The format of skippable frames is as follows : + a) Skippable frame ID - 4 Bytes, Little endian format, any value from 0x184D2A50 to 0x184D2A5F + b) Frame Size - 4 Bytes, Little endian format, unsigned 32-bits + c) Frame Content - any content (User Data) of length equal to Frame Size + For skippable frames ZSTD_getFrameHeader() returns zfhPtr->frameType==ZSTD_skippableFrame. + For skippable frames ZSTD_decompressContinue() always returns 0 : it only skips the content. +*/ + +/*===== Buffer-less streaming decompression functions =====*/ +typedef enum { ZSTD_frame, ZSTD_skippableFrame } ZSTD_frameType_e; +typedef struct { + unsigned long long frameContentSize; /* if == ZSTD_CONTENTSIZE_UNKNOWN, it means this field is not available. 0 means "empty" */ + unsigned long long windowSize; /* can be very large, up to <= frameContentSize */ + unsigned blockSizeMax; + ZSTD_frameType_e frameType; /* if == ZSTD_skippableFrame, frameContentSize is the size of skippable content */ + unsigned headerSize; + unsigned dictID; + unsigned checksumFlag; +} ZSTD_frameHeader; + +/*! ZSTD_getFrameHeader() : + * decode Frame Header, or requires larger `srcSize`. + * @return : 0, `zfhPtr` is correctly filled, + * >0, `srcSize` is too small, value is wanted `srcSize` amount, + * or an error code, which can be tested using ZSTD_isError() */ +ZSTDLIB_API size_t ZSTD_getFrameHeader(ZSTD_frameHeader* zfhPtr, const void* src, size_t srcSize); /*< doesn't consume input */ +/*! ZSTD_getFrameHeader_advanced() : + * same as ZSTD_getFrameHeader(), + * with added capability to select a format (like ZSTD_f_zstd1_magicless) */ +ZSTDLIB_API size_t ZSTD_getFrameHeader_advanced(ZSTD_frameHeader* zfhPtr, const void* src, size_t srcSize, ZSTD_format_e format); +ZSTDLIB_API size_t ZSTD_decodingBufferSize_min(unsigned long long windowSize, unsigned long long frameContentSize); /*< when frame content size is not known, pass in frameContentSize == ZSTD_CONTENTSIZE_UNKNOWN */ + +ZSTDLIB_API size_t ZSTD_decompressBegin(ZSTD_DCtx* dctx); +ZSTDLIB_API size_t ZSTD_decompressBegin_usingDict(ZSTD_DCtx* dctx, const void* dict, size_t dictSize); +ZSTDLIB_API size_t ZSTD_decompressBegin_usingDDict(ZSTD_DCtx* dctx, const ZSTD_DDict* ddict); + +ZSTDLIB_API size_t ZSTD_nextSrcSizeToDecompress(ZSTD_DCtx* dctx); +ZSTDLIB_API size_t ZSTD_decompressContinue(ZSTD_DCtx* dctx, void* dst, size_t dstCapacity, const void* src, size_t srcSize); + +/* misc */ +ZSTDLIB_API void ZSTD_copyDCtx(ZSTD_DCtx* dctx, const ZSTD_DCtx* preparedDCtx); +typedef enum { ZSTDnit_frameHeader, ZSTDnit_blockHeader, ZSTDnit_block, ZSTDnit_lastBlock, ZSTDnit_checksum, ZSTDnit_skippableFrame } ZSTD_nextInputType_e; +ZSTDLIB_API ZSTD_nextInputType_e ZSTD_nextInputType(ZSTD_DCtx* dctx); + + + + +/* ============================ */ +/* Block level API */ +/* ============================ */ + +/*! + Block functions produce and decode raw zstd blocks, without frame metadata. + Frame metadata cost is typically ~12 bytes, which can be non-negligible for very small blocks (< 100 bytes). + But users will have to take in charge needed metadata to regenerate data, such as compressed and content sizes. + + A few rules to respect : + - Compressing and decompressing require a context structure + + Use ZSTD_createCCtx() and ZSTD_createDCtx() + - It is necessary to init context before starting + + compression : any ZSTD_compressBegin*() variant, including with dictionary + + decompression : any ZSTD_decompressBegin*() variant, including with dictionary + + copyCCtx() and copyDCtx() can be used too + - Block size is limited, it must be <= ZSTD_getBlockSize() <= ZSTD_BLOCKSIZE_MAX == 128 KB + + If input is larger than a block size, it's necessary to split input data into multiple blocks + + For inputs larger than a single block, consider using regular ZSTD_compress() instead. + Frame metadata is not that costly, and quickly becomes negligible as source size grows larger than a block. + - When a block is considered not compressible enough, ZSTD_compressBlock() result will be 0 (zero) ! + ===> In which case, nothing is produced into `dst` ! + + User __must__ test for such outcome and deal directly with uncompressed data + + A block cannot be declared incompressible if ZSTD_compressBlock() return value was != 0. + Doing so would mess up with statistics history, leading to potential data corruption. + + ZSTD_decompressBlock() _doesn't accept uncompressed data as input_ !! + + In case of multiple successive blocks, should some of them be uncompressed, + decoder must be informed of their existence in order to follow proper history. + Use ZSTD_insertBlock() for such a case. +*/ + +/*===== Raw zstd block functions =====*/ +ZSTDLIB_API size_t ZSTD_getBlockSize (const ZSTD_CCtx* cctx); +ZSTDLIB_API size_t ZSTD_compressBlock (ZSTD_CCtx* cctx, void* dst, size_t dstCapacity, const void* src, size_t srcSize); +ZSTDLIB_API size_t ZSTD_decompressBlock(ZSTD_DCtx* dctx, void* dst, size_t dstCapacity, const void* src, size_t srcSize); +ZSTDLIB_API size_t ZSTD_insertBlock (ZSTD_DCtx* dctx, const void* blockStart, size_t blockSize); /*< insert uncompressed block into `dctx` history. Useful for multi-blocks decompression. */ + + +#endif /* ZSTD_H_ZSTD_STATIC_LINKING_ONLY */ + |