1 files changed, 0 insertions, 361 deletions
diff --git a/sound/oss/uart6850.c b/sound/oss/uart6850.c
deleted file mode 100644
index eda32d7eddbd..000000000000
--- a/sound/oss/uart6850.c
+++ /dev/null
@@ -1,361 +0,0 @@
-/*
- * sound/oss/uart6850.c
- *
- *
- * Copyright (C) by Hannu Savolainen 1993-1997
- *
- * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
- * Version 2 (June 1991). See the "COPYING" file distributed with this software
- * for more info.
- * Extended by Alan Cox for Red Hat Software. Now a loadable MIDI driver.
- * 28/4/97 - (C) Copyright Alan Cox. Released under the GPL version 2.
- *
- * Alan Cox:		Updated for new modular code. Removed snd_* irq handling. Now
- *			uses native linux resources
- * Christoph Hellwig:	Adapted to module_init/module_exit
- * Jeff Garzik:		Made it work again, in theory
- *			FIXME: If the request_irq() succeeds, the probe succeeds. Ug.
- *
- *	Status: Testing required (no shit -jgarzik)
- *
- *
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/spinlock.h>
-/* Mon Nov 22 22:38:35 MET 1993 marco@driq.home.usn.nl:
- *      added 6850 support, used with COVOX SoundMaster II and custom cards.
- */
-
-#include "sound_config.h"
-
-static int uart6850_base = 0x330;
-
-static int *uart6850_osp;
-
-#define	DATAPORT   (uart6850_base)
-#define	COMDPORT   (uart6850_base+1)
-#define	STATPORT   (uart6850_base+1)
-
-static int uart6850_status(void)
-{
-	return inb(STATPORT);
-}
-
-#define input_avail()		(uart6850_status()&INPUT_AVAIL)
-#define output_ready()		(uart6850_status()&OUTPUT_READY)
-
-static void uart6850_cmd(unsigned char cmd)
-{
-	outb(cmd, COMDPORT);
-}
-
-static int uart6850_read(void)
-{
-	return inb(DATAPORT);
-}
-
-static void uart6850_write(unsigned char byte)
-{
-	outb(byte, DATAPORT);
-}
-
-#define	OUTPUT_READY	0x02	/* Mask for data ready Bit */
-#define	INPUT_AVAIL	0x01	/* Mask for Data Send Ready Bit */
-
-#define	UART_RESET	0x95
-#define	UART_MODE_ON	0x03
-
-static int uart6850_opened;
-static int uart6850_irq;
-static int uart6850_detected;
-static int my_dev;
-static DEFINE_SPINLOCK(lock);
-
-static void (*midi_input_intr) (int dev, unsigned char data);
-static void poll_uart6850(unsigned long dummy);
-
-
-static DEFINE_TIMER(uart6850_timer, poll_uart6850, 0, 0);
-
-static void uart6850_input_loop(void)
-{
-	int count = 10;
-
-	while (count)
-	{
-		/*
-		 * Not timed out
-		 */
-		if (input_avail())
-		{
-			unsigned char c = uart6850_read();
-			count = 100;
-			if (uart6850_opened & OPEN_READ)
-				midi_input_intr(my_dev, c);
-		}
-		else
-		{
-			while (!input_avail() && count)
-				count--;
-		}
-	}
-}
-
-static irqreturn_t m6850intr(int irq, void *dev_id)
-{
-	if (input_avail())
-		uart6850_input_loop();
-	return IRQ_HANDLED;
-}
-
-/*
- *	It looks like there is no input interrupts in the UART mode. Let's try
- *	polling.
- */
-
-static void poll_uart6850(unsigned long dummy)
-{
-	unsigned long flags;
-
-	if (!(uart6850_opened & OPEN_READ))
-		return;		/* Device has been closed */
-
-	spin_lock_irqsave(&lock,flags);
-	if (input_avail())
-		uart6850_input_loop();
-
-	uart6850_timer.expires = 1 + jiffies;
-	add_timer(&uart6850_timer);
-	
-	/*
-	 *	Come back later
-	 */
-
-	spin_unlock_irqrestore(&lock,flags);
-}
-
-static int uart6850_open(int dev, int mode,
-	      void            (*input) (int dev, unsigned char data),
-	      void            (*output) (int dev)
-)
-{
-	if (uart6850_opened)
-	{
-/*		  printk("Midi6850: Midi busy\n");*/
-		  return -EBUSY;
-	}
-
-	uart6850_cmd(UART_RESET);
-	uart6850_input_loop();
-	midi_input_intr = input;
-	uart6850_opened = mode;
-	poll_uart6850(0);	/*
-				 * Enable input polling
-				 */
-
-	return 0;
-}
-
-static void uart6850_close(int dev)
-{
-	uart6850_cmd(UART_MODE_ON);
-	del_timer(&uart6850_timer);
-	uart6850_opened = 0;
-}
-
-static int uart6850_out(int dev, unsigned char midi_byte)
-{
-	int timeout;
-	unsigned long flags;
-
-	/*
-	 * Test for input since pending input seems to block the output.
-	 */
-
-	spin_lock_irqsave(&lock,flags);
-
-	if (input_avail())
-		uart6850_input_loop();
-
-	spin_unlock_irqrestore(&lock,flags);
-
-	/*
-	 * Sometimes it takes about 13000 loops before the output becomes ready
-	 * (After reset). Normally it takes just about 10 loops.
-	 */
-
-	for (timeout = 30000; timeout > 0 && !output_ready(); timeout--);	/*
-										 * Wait
-										 */
-	if (!output_ready())
-	{
-		printk(KERN_WARNING "Midi6850: Timeout\n");
-		return 0;
-	}
-	uart6850_write(midi_byte);
-	return 1;
-}
-
-static inline int uart6850_command(int dev, unsigned char *midi_byte)
-{
-	return 1;
-}
-
-static inline int uart6850_start_read(int dev)
-{
-	return 0;
-}
-
-static inline int uart6850_end_read(int dev)
-{
-	return 0;
-}
-
-static inline void uart6850_kick(int dev)
-{
-}
-
-static inline int uart6850_buffer_status(int dev)
-{
-	return 0;		/*
-				 * No data in buffers
-				 */
-}
-
-#define MIDI_SYNTH_NAME	"6850 UART Midi"
-#define MIDI_SYNTH_CAPS	SYNTH_CAP_INPUT
-#include "midi_synth.h"
-
-static struct midi_operations uart6850_operations =
-{
-	.owner		= THIS_MODULE,
-	.info		= {"6850 UART", 0, 0, SNDCARD_UART6850},
-	.converter	= &std_midi_synth,
-	.in_info	= {0},
-	.open		= uart6850_open,
-	.close		= uart6850_close,
-	.outputc	= uart6850_out,
-	.start_read	= uart6850_start_read,
-	.end_read	= uart6850_end_read,
-	.kick		= uart6850_kick,
-	.command	= uart6850_command,
-	.buffer_status	= uart6850_buffer_status
-};
-
-
-static void __init attach_uart6850(struct address_info *hw_config)
-{
-	int ok, timeout;
-	unsigned long   flags;
-
-	if (!uart6850_detected)
-		return;
-
-	if ((my_dev = sound_alloc_mididev()) == -1)
-	{
-		printk(KERN_INFO "uart6850: Too many midi devices detected\n");
-		return;
-	}
-	uart6850_base = hw_config->io_base;
-	uart6850_osp = hw_config->osp;
-	uart6850_irq = hw_config->irq;
-
-	spin_lock_irqsave(&lock,flags);
-
-	for (timeout = 30000; timeout > 0 && !output_ready(); timeout--);	/*
-										 * Wait
-										 */
-	uart6850_cmd(UART_MODE_ON);
-	ok = 1;
-	spin_unlock_irqrestore(&lock,flags);
-
-	conf_printf("6850 Midi Interface", hw_config);
-
-	std_midi_synth.midi_dev = my_dev;
-	hw_config->slots[4] = my_dev;
-	midi_devs[my_dev] = &uart6850_operations;
-	sequencer_init();
-}
-
-static inline int reset_uart6850(void)
-{
-	uart6850_read();
-	return 1;		/*
-				 * OK
-				 */
-}
-
-static int __init probe_uart6850(struct address_info *hw_config)
-{
-	int ok;
-
-	uart6850_osp = hw_config->osp;
-	uart6850_base = hw_config->io_base;
-	uart6850_irq = hw_config->irq;
-
-	if (request_irq(uart6850_irq, m6850intr, 0, "MIDI6850", NULL) < 0)
-		return 0;
-
-	ok = reset_uart6850();
-	uart6850_detected = ok;
-	return ok;
-}
-
-static void __exit unload_uart6850(struct address_info *hw_config)
-{
-	free_irq(hw_config->irq, NULL);
-	sound_unload_mididev(hw_config->slots[4]);
-}
-
-static struct address_info cfg_mpu;
-
-static int __initdata io = -1;
-static int __initdata irq = -1;
-
-module_param_hw(io, int, ioport, 0);
-module_param_hw(irq, int, irq, 0);
-
-static int __init init_uart6850(void)
-{
-	cfg_mpu.io_base = io;
-	cfg_mpu.irq = irq;
-
-	if (cfg_mpu.io_base == -1 || cfg_mpu.irq == -1) {
-		printk(KERN_INFO "uart6850: irq and io must be set.\n");
-		return -EINVAL;
-	}
-
-	if (probe_uart6850(&cfg_mpu))
-		return -ENODEV;
-	attach_uart6850(&cfg_mpu);
-
-	return 0;
-}
-
-static void __exit cleanup_uart6850(void)
-{
-	unload_uart6850(&cfg_mpu);
-}
-
-module_init(init_uart6850);
-module_exit(cleanup_uart6850);
-
-#ifndef MODULE
-static int __init setup_uart6850(char *str)
-{
-	/* io, irq */
-	int ints[3];
-	
-	str = get_options(str, ARRAY_SIZE(ints), ints);
-	
-	io = ints[1];
-	irq = ints[2];
-
-	return 1;
-}
-__setup("uart6850=", setup_uart6850);
-#endif
-MODULE_LICENSE("GPL");