summaryrefslogtreecommitdiffstats
path: root/sound/pci/echoaudio/layla24_dsp.c
diff options
context:
space:
mode:
Diffstat (limited to 'sound/pci/echoaudio/layla24_dsp.c')
-rw-r--r--sound/pci/echoaudio/layla24_dsp.c394
1 files changed, 394 insertions, 0 deletions
diff --git a/sound/pci/echoaudio/layla24_dsp.c b/sound/pci/echoaudio/layla24_dsp.c
new file mode 100644
index 000000000000..7ec5b63d0dce
--- /dev/null
+++ b/sound/pci/echoaudio/layla24_dsp.c
@@ -0,0 +1,394 @@
+/****************************************************************************
+
+ Copyright Echo Digital Audio Corporation (c) 1998 - 2004
+ All rights reserved
+ www.echoaudio.com
+
+ This file is part of Echo Digital Audio's generic driver library.
+
+ Echo Digital Audio's generic driver library is free software;
+ you can redistribute it and/or modify it under the terms of
+ the GNU General Public License as published by the Free Software Foundation.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston,
+ MA 02111-1307, USA.
+
+ *************************************************************************
+
+ Translation from C++ and adaptation for use in ALSA-Driver
+ were made by Giuliano Pochini <pochini@shiny.it>
+
+****************************************************************************/
+
+
+static int write_control_reg(struct echoaudio *chip, u32 value, char force);
+static int set_input_clock(struct echoaudio *chip, u16 clock);
+static int set_professional_spdif(struct echoaudio *chip, char prof);
+static int set_digital_mode(struct echoaudio *chip, u8 mode);
+static int load_asic_generic(struct echoaudio *chip, u32 cmd,
+ const struct firmware *asic);
+static int check_asic_status(struct echoaudio *chip);
+
+
+static int init_hw(struct echoaudio *chip, u16 device_id, u16 subdevice_id)
+{
+ int err;
+
+ DE_INIT(("init_hw() - Layla24\n"));
+ snd_assert((subdevice_id & 0xfff0) == LAYLA24, return -ENODEV);
+
+ if ((err = init_dsp_comm_page(chip))) {
+ DE_INIT(("init_hw - could not initialize DSP comm page\n"));
+ return err;
+ }
+
+ chip->device_id = device_id;
+ chip->subdevice_id = subdevice_id;
+ chip->bad_board = TRUE;
+ chip->has_midi = TRUE;
+ chip->dsp_code_to_load = &card_fw[FW_LAYLA24_DSP];
+ chip->input_clock_types =
+ ECHO_CLOCK_BIT_INTERNAL | ECHO_CLOCK_BIT_SPDIF |
+ ECHO_CLOCK_BIT_WORD | ECHO_CLOCK_BIT_ADAT;
+ chip->digital_modes =
+ ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_RCA |
+ ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_OPTICAL |
+ ECHOCAPS_HAS_DIGITAL_MODE_ADAT;
+ chip->digital_mode = DIGITAL_MODE_SPDIF_RCA;
+ chip->professional_spdif = FALSE;
+ chip->digital_in_automute = TRUE;
+
+ if ((err = load_firmware(chip)) < 0)
+ return err;
+ chip->bad_board = FALSE;
+
+ if ((err = init_line_levels(chip)) < 0)
+ return err;
+
+ err = set_digital_mode(chip, DIGITAL_MODE_SPDIF_RCA);
+ snd_assert(err >= 0, return err);
+ err = set_professional_spdif(chip, TRUE);
+
+ DE_INIT(("init_hw done\n"));
+ return err;
+}
+
+
+
+static u32 detect_input_clocks(const struct echoaudio *chip)
+{
+ u32 clocks_from_dsp, clock_bits;
+
+ /* Map the DSP clock detect bits to the generic driver clock detect bits */
+ clocks_from_dsp = le32_to_cpu(chip->comm_page->status_clocks);
+
+ clock_bits = ECHO_CLOCK_BIT_INTERNAL;
+
+ if (clocks_from_dsp & GML_CLOCK_DETECT_BIT_SPDIF)
+ clock_bits |= ECHO_CLOCK_BIT_SPDIF;
+
+ if (clocks_from_dsp & GML_CLOCK_DETECT_BIT_ADAT)
+ clock_bits |= ECHO_CLOCK_BIT_ADAT;
+
+ if (clocks_from_dsp & GML_CLOCK_DETECT_BIT_WORD)
+ clock_bits |= ECHO_CLOCK_BIT_WORD;
+
+ return clock_bits;
+}
+
+
+
+/* Layla24 has an ASIC on the PCI card and another ASIC in the external box;
+both need to be loaded. */
+static int load_asic(struct echoaudio *chip)
+{
+ int err;
+
+ if (chip->asic_loaded)
+ return 1;
+
+ DE_INIT(("load_asic\n"));
+
+ /* Give the DSP a few milliseconds to settle down */
+ mdelay(10);
+
+ /* Load the ASIC for the PCI card */
+ err = load_asic_generic(chip, DSP_FNC_LOAD_LAYLA24_PCI_CARD_ASIC,
+ &card_fw[FW_LAYLA24_1_ASIC]);
+ if (err < 0)
+ return err;
+
+ chip->asic_code = &card_fw[FW_LAYLA24_2S_ASIC];
+
+ /* Now give the new ASIC a little time to set up */
+ mdelay(10);
+
+ /* Do the external one */
+ err = load_asic_generic(chip, DSP_FNC_LOAD_LAYLA24_EXTERNAL_ASIC,
+ &card_fw[FW_LAYLA24_2S_ASIC]);
+ if (err < 0)
+ return FALSE;
+
+ /* Now give the external ASIC a little time to set up */
+ mdelay(10);
+
+ /* See if it worked */
+ err = check_asic_status(chip);
+
+ /* Set up the control register if the load succeeded -
+ 48 kHz, internal clock, S/PDIF RCA mode */
+ if (!err)
+ err = write_control_reg(chip, GML_CONVERTER_ENABLE | GML_48KHZ,
+ TRUE);
+
+ DE_INIT(("load_asic() done\n"));
+ return err;
+}
+
+
+
+static int set_sample_rate(struct echoaudio *chip, u32 rate)
+{
+ u32 control_reg, clock, base_rate;
+
+ snd_assert(rate < 50000 || chip->digital_mode != DIGITAL_MODE_ADAT,
+ return -EINVAL);
+
+ /* Only set the clock for internal mode. */
+ if (chip->input_clock != ECHO_CLOCK_INTERNAL) {
+ DE_ACT(("set_sample_rate: Cannot set sample rate - "
+ "clock not set to CLK_CLOCKININTERNAL\n"));
+ /* Save the rate anyhow */
+ chip->comm_page->sample_rate = cpu_to_le32(rate);
+ chip->sample_rate = rate;
+ return 0;
+ }
+
+ /* Get the control register & clear the appropriate bits */
+ control_reg = le32_to_cpu(chip->comm_page->control_register);
+ control_reg &= GML_CLOCK_CLEAR_MASK & GML_SPDIF_RATE_CLEAR_MASK;
+
+ clock = 0;
+
+ switch (rate) {
+ case 96000:
+ clock = GML_96KHZ;
+ break;
+ case 88200:
+ clock = GML_88KHZ;
+ break;
+ case 48000:
+ clock = GML_48KHZ | GML_SPDIF_SAMPLE_RATE1;
+ break;
+ case 44100:
+ clock = GML_44KHZ;
+ /* Professional mode */
+ if (control_reg & GML_SPDIF_PRO_MODE)
+ clock |= GML_SPDIF_SAMPLE_RATE0;
+ break;
+ case 32000:
+ clock = GML_32KHZ | GML_SPDIF_SAMPLE_RATE0 |
+ GML_SPDIF_SAMPLE_RATE1;
+ break;
+ case 22050:
+ clock = GML_22KHZ;
+ break;
+ case 16000:
+ clock = GML_16KHZ;
+ break;
+ case 11025:
+ clock = GML_11KHZ;
+ break;
+ case 8000:
+ clock = GML_8KHZ;
+ break;
+ default:
+ /* If this is a non-standard rate, then the driver needs to
+ use Layla24's special "continuous frequency" mode */
+ clock = LAYLA24_CONTINUOUS_CLOCK;
+ if (rate > 50000) {
+ base_rate = rate >> 1;
+ control_reg |= GML_DOUBLE_SPEED_MODE;
+ } else {
+ base_rate = rate;
+ }
+
+ if (base_rate < 25000)
+ base_rate = 25000;
+
+ if (wait_handshake(chip))
+ return -EIO;
+
+ chip->comm_page->sample_rate =
+ cpu_to_le32(LAYLA24_MAGIC_NUMBER / base_rate - 2);
+
+ clear_handshake(chip);
+ send_vector(chip, DSP_VC_SET_LAYLA24_FREQUENCY_REG);
+ }
+
+ control_reg |= clock;
+
+ chip->comm_page->sample_rate = cpu_to_le32(rate); /* ignored by the DSP ? */
+ chip->sample_rate = rate;
+ DE_ACT(("set_sample_rate: %d clock %d\n", rate, control_reg));
+
+ return write_control_reg(chip, control_reg, FALSE);
+}
+
+
+
+static int set_input_clock(struct echoaudio *chip, u16 clock)
+{
+ u32 control_reg, clocks_from_dsp;
+
+ /* Mask off the clock select bits */
+ control_reg = le32_to_cpu(chip->comm_page->control_register) &
+ GML_CLOCK_CLEAR_MASK;
+ clocks_from_dsp = le32_to_cpu(chip->comm_page->status_clocks);
+
+ /* Pick the new clock */
+ switch (clock) {
+ case ECHO_CLOCK_INTERNAL:
+ DE_ACT(("Set Layla24 clock to INTERNAL\n"));
+ chip->input_clock = ECHO_CLOCK_INTERNAL;
+ return set_sample_rate(chip, chip->sample_rate);
+ case ECHO_CLOCK_SPDIF:
+ if (chip->digital_mode == DIGITAL_MODE_ADAT)
+ return -EAGAIN;
+ control_reg |= GML_SPDIF_CLOCK;
+ /* Layla24 doesn't support 96KHz S/PDIF */
+ control_reg &= ~GML_DOUBLE_SPEED_MODE;
+ DE_ACT(("Set Layla24 clock to SPDIF\n"));
+ break;
+ case ECHO_CLOCK_WORD:
+ control_reg |= GML_WORD_CLOCK;
+ if (clocks_from_dsp & GML_CLOCK_DETECT_BIT_WORD96)
+ control_reg |= GML_DOUBLE_SPEED_MODE;
+ else
+ control_reg &= ~GML_DOUBLE_SPEED_MODE;
+ DE_ACT(("Set Layla24 clock to WORD\n"));
+ break;
+ case ECHO_CLOCK_ADAT:
+ if (chip->digital_mode != DIGITAL_MODE_ADAT)
+ return -EAGAIN;
+ control_reg |= GML_ADAT_CLOCK;
+ control_reg &= ~GML_DOUBLE_SPEED_MODE;
+ DE_ACT(("Set Layla24 clock to ADAT\n"));
+ break;
+ default:
+ DE_ACT(("Input clock 0x%x not supported for Layla24\n", clock));
+ return -EINVAL;
+ }
+
+ chip->input_clock = clock;
+ return write_control_reg(chip, control_reg, TRUE);
+}
+
+
+
+/* Depending on what digital mode you want, Layla24 needs different ASICs
+loaded. This function checks the ASIC needed for the new mode and sees
+if it matches the one already loaded. */
+static int switch_asic(struct echoaudio *chip, const struct firmware *asic)
+{
+ s8 *monitors;
+
+ /* Check to see if this is already loaded */
+ if (asic != chip->asic_code) {
+ monitors = kmalloc(MONITOR_ARRAY_SIZE, GFP_KERNEL);
+ if (! monitors)
+ return -ENOMEM;
+
+ memcpy(monitors, chip->comm_page->monitors, MONITOR_ARRAY_SIZE);
+ memset(chip->comm_page->monitors, ECHOGAIN_MUTED,
+ MONITOR_ARRAY_SIZE);
+
+ /* Load the desired ASIC */
+ if (load_asic_generic(chip, DSP_FNC_LOAD_LAYLA24_EXTERNAL_ASIC,
+ asic) < 0) {
+ memcpy(chip->comm_page->monitors, monitors,
+ MONITOR_ARRAY_SIZE);
+ kfree(monitors);
+ return -EIO;
+ }
+ chip->asic_code = asic;
+ memcpy(chip->comm_page->monitors, monitors, MONITOR_ARRAY_SIZE);
+ kfree(monitors);
+ }
+
+ return 0;
+}
+
+
+
+static int dsp_set_digital_mode(struct echoaudio *chip, u8 mode)
+{
+ u32 control_reg;
+ int err, incompatible_clock;
+ const struct firmware *asic;
+
+ /* Set clock to "internal" if it's not compatible with the new mode */
+ incompatible_clock = FALSE;
+ switch (mode) {
+ case DIGITAL_MODE_SPDIF_OPTICAL:
+ case DIGITAL_MODE_SPDIF_RCA:
+ if (chip->input_clock == ECHO_CLOCK_ADAT)
+ incompatible_clock = TRUE;
+ asic = &card_fw[FW_LAYLA24_2S_ASIC];
+ break;
+ case DIGITAL_MODE_ADAT:
+ if (chip->input_clock == ECHO_CLOCK_SPDIF)
+ incompatible_clock = TRUE;
+ asic = &card_fw[FW_LAYLA24_2A_ASIC];
+ break;
+ default:
+ DE_ACT(("Digital mode not supported: %d\n", mode));
+ return -EINVAL;
+ }
+
+ if (incompatible_clock) { /* Switch to 48KHz, internal */
+ chip->sample_rate = 48000;
+ spin_lock_irq(&chip->lock);
+ set_input_clock(chip, ECHO_CLOCK_INTERNAL);
+ spin_unlock_irq(&chip->lock);
+ }
+
+ /* switch_asic() can sleep */
+ if (switch_asic(chip, asic) < 0)
+ return -EIO;
+
+ spin_lock_irq(&chip->lock);
+
+ /* Tweak the control register */
+ control_reg = le32_to_cpu(chip->comm_page->control_register);
+ control_reg &= GML_DIGITAL_MODE_CLEAR_MASK;
+
+ switch (mode) {
+ case DIGITAL_MODE_SPDIF_OPTICAL:
+ control_reg |= GML_SPDIF_OPTICAL_MODE;
+ break;
+ case DIGITAL_MODE_SPDIF_RCA:
+ /* GML_SPDIF_OPTICAL_MODE bit cleared */
+ break;
+ case DIGITAL_MODE_ADAT:
+ control_reg |= GML_ADAT_MODE;
+ control_reg &= ~GML_DOUBLE_SPEED_MODE;
+ break;
+ }
+
+ err = write_control_reg(chip, control_reg, TRUE);
+ spin_unlock_irq(&chip->lock);
+ if (err < 0)
+ return err;
+ chip->digital_mode = mode;
+
+ DE_ACT(("set_digital_mode to %d\n", mode));
+ return incompatible_clock;
+}