summaryrefslogtreecommitdiffstats
path: root/sound/pci/echoaudio/mona_dsp.c
diff options
context:
space:
mode:
Diffstat (limited to 'sound/pci/echoaudio/mona_dsp.c')
-rw-r--r--sound/pci/echoaudio/mona_dsp.c428
1 files changed, 428 insertions, 0 deletions
diff --git a/sound/pci/echoaudio/mona_dsp.c b/sound/pci/echoaudio/mona_dsp.c
new file mode 100644
index 000000000000..c0b4bf0be7d1
--- /dev/null
+++ b/sound/pci/echoaudio/mona_dsp.c
@@ -0,0 +1,428 @@
+/****************************************************************************
+
+ Copyright Echo Digital Audio Corporation (c) 1998 - 2004
+ All rights reserved
+ www.echoaudio.com
+
+ This file is part of Echo Digital Audio's generic driver library.
+
+ Echo Digital Audio's generic driver library is free software;
+ you can redistribute it and/or modify it under the terms of
+ the GNU General Public License as published by the Free Software
+ Foundation.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston,
+ MA 02111-1307, USA.
+
+ *************************************************************************
+
+ Translation from C++ and adaptation for use in ALSA-Driver
+ were made by Giuliano Pochini <pochini@shiny.it>
+
+****************************************************************************/
+
+
+static int write_control_reg(struct echoaudio *chip, u32 value, char force);
+static int set_input_clock(struct echoaudio *chip, u16 clock);
+static int set_professional_spdif(struct echoaudio *chip, char prof);
+static int set_digital_mode(struct echoaudio *chip, u8 mode);
+static int load_asic_generic(struct echoaudio *chip, u32 cmd,
+ const struct firmware *asic);
+static int check_asic_status(struct echoaudio *chip);
+
+
+static int init_hw(struct echoaudio *chip, u16 device_id, u16 subdevice_id)
+{
+ int err;
+
+ DE_INIT(("init_hw() - Mona\n"));
+ snd_assert((subdevice_id & 0xfff0) == MONA, return -ENODEV);
+
+ if ((err = init_dsp_comm_page(chip))) {
+ DE_INIT(("init_hw - could not initialize DSP comm page\n"));
+ return err;
+ }
+
+ chip->device_id = device_id;
+ chip->subdevice_id = subdevice_id;
+ chip->bad_board = TRUE;
+ chip->input_clock_types =
+ ECHO_CLOCK_BIT_INTERNAL | ECHO_CLOCK_BIT_SPDIF |
+ ECHO_CLOCK_BIT_WORD | ECHO_CLOCK_BIT_ADAT;
+ chip->digital_modes =
+ ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_RCA |
+ ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_OPTICAL |
+ ECHOCAPS_HAS_DIGITAL_MODE_ADAT;
+
+ /* Mona comes in both '301 and '361 flavors */
+ if (chip->device_id == DEVICE_ID_56361)
+ chip->dsp_code_to_load = &card_fw[FW_MONA_361_DSP];
+ else
+ chip->dsp_code_to_load = &card_fw[FW_MONA_301_DSP];
+
+ chip->digital_mode = DIGITAL_MODE_SPDIF_RCA;
+ chip->professional_spdif = FALSE;
+ chip->digital_in_automute = TRUE;
+
+ if ((err = load_firmware(chip)) < 0)
+ return err;
+ chip->bad_board = FALSE;
+
+ if ((err = init_line_levels(chip)) < 0)
+ return err;
+
+ err = set_digital_mode(chip, DIGITAL_MODE_SPDIF_RCA);
+ snd_assert(err >= 0, return err);
+ err = set_professional_spdif(chip, TRUE);
+
+ DE_INIT(("init_hw done\n"));
+ return err;
+}
+
+
+
+static u32 detect_input_clocks(const struct echoaudio *chip)
+{
+ u32 clocks_from_dsp, clock_bits;
+
+ /* Map the DSP clock detect bits to the generic driver clock
+ detect bits */
+ clocks_from_dsp = le32_to_cpu(chip->comm_page->status_clocks);
+
+ clock_bits = ECHO_CLOCK_BIT_INTERNAL;
+
+ if (clocks_from_dsp & GML_CLOCK_DETECT_BIT_SPDIF)
+ clock_bits |= ECHO_CLOCK_BIT_SPDIF;
+
+ if (clocks_from_dsp & GML_CLOCK_DETECT_BIT_ADAT)
+ clock_bits |= ECHO_CLOCK_BIT_ADAT;
+
+ if (clocks_from_dsp & GML_CLOCK_DETECT_BIT_WORD)
+ clock_bits |= ECHO_CLOCK_BIT_WORD;
+
+ return clock_bits;
+}
+
+
+
+/* Mona has an ASIC on the PCI card and another ASIC in the external box;
+both need to be loaded. */
+static int load_asic(struct echoaudio *chip)
+{
+ u32 control_reg;
+ int err;
+ const struct firmware *asic;
+
+ if (chip->asic_loaded)
+ return 0;
+
+ mdelay(10);
+
+ if (chip->device_id == DEVICE_ID_56361)
+ asic = &card_fw[FW_MONA_361_1_ASIC48];
+ else
+ asic = &card_fw[FW_MONA_301_1_ASIC48];
+
+ err = load_asic_generic(chip, DSP_FNC_LOAD_MONA_PCI_CARD_ASIC, asic);
+ if (err < 0)
+ return err;
+
+ chip->asic_code = asic;
+ mdelay(10);
+
+ /* Do the external one */
+ err = load_asic_generic(chip, DSP_FNC_LOAD_MONA_EXTERNAL_ASIC,
+ &card_fw[FW_MONA_2_ASIC]);
+ if (err < 0)
+ return err;
+
+ mdelay(10);
+ err = check_asic_status(chip);
+
+ /* Set up the control register if the load succeeded -
+ 48 kHz, internal clock, S/PDIF RCA mode */
+ if (!err) {
+ control_reg = GML_CONVERTER_ENABLE | GML_48KHZ;
+ err = write_control_reg(chip, control_reg, TRUE);
+ }
+
+ return err;
+}
+
+
+
+/* Depending on what digital mode you want, Mona needs different ASICs
+loaded. This function checks the ASIC needed for the new mode and sees
+if it matches the one already loaded. */
+static int switch_asic(struct echoaudio *chip, char double_speed)
+{
+ const struct firmware *asic;
+ int err;
+
+ /* Check the clock detect bits to see if this is
+ a single-speed clock or a double-speed clock; load
+ a new ASIC if necessary. */
+ if (chip->device_id == DEVICE_ID_56361) {
+ if (double_speed)
+ asic = &card_fw[FW_MONA_361_1_ASIC96];
+ else
+ asic = &card_fw[FW_MONA_361_1_ASIC48];
+ } else {
+ if (double_speed)
+ asic = &card_fw[FW_MONA_301_1_ASIC96];
+ else
+ asic = &card_fw[FW_MONA_301_1_ASIC48];
+ }
+
+ if (asic != chip->asic_code) {
+ /* Load the desired ASIC */
+ err = load_asic_generic(chip, DSP_FNC_LOAD_MONA_PCI_CARD_ASIC,
+ asic);
+ if (err < 0)
+ return err;
+ chip->asic_code = asic;
+ }
+
+ return 0;
+}
+
+
+
+static int set_sample_rate(struct echoaudio *chip, u32 rate)
+{
+ u32 control_reg, clock;
+ const struct firmware *asic;
+ char force_write;
+
+ /* Only set the clock for internal mode. */
+ if (chip->input_clock != ECHO_CLOCK_INTERNAL) {
+ DE_ACT(("set_sample_rate: Cannot set sample rate - "
+ "clock not set to CLK_CLOCKININTERNAL\n"));
+ /* Save the rate anyhow */
+ chip->comm_page->sample_rate = cpu_to_le32(rate);
+ chip->sample_rate = rate;
+ return 0;
+ }
+
+ /* Now, check to see if the required ASIC is loaded */
+ if (rate >= 88200) {
+ if (chip->digital_mode == DIGITAL_MODE_ADAT)
+ return -EINVAL;
+ if (chip->device_id == DEVICE_ID_56361)
+ asic = &card_fw[FW_MONA_361_1_ASIC96];
+ else
+ asic = &card_fw[FW_MONA_301_1_ASIC96];
+ } else {
+ if (chip->device_id == DEVICE_ID_56361)
+ asic = &card_fw[FW_MONA_361_1_ASIC48];
+ else
+ asic = &card_fw[FW_MONA_301_1_ASIC48];
+ }
+
+ force_write = 0;
+ if (asic != chip->asic_code) {
+ int err;
+ /* Load the desired ASIC (load_asic_generic() can sleep) */
+ spin_unlock_irq(&chip->lock);
+ err = load_asic_generic(chip, DSP_FNC_LOAD_MONA_PCI_CARD_ASIC,
+ asic);
+ spin_lock_irq(&chip->lock);
+
+ if (err < 0)
+ return err;
+ chip->asic_code = asic;
+ force_write = 1;
+ }
+
+ /* Compute the new control register value */
+ clock = 0;
+ control_reg = le32_to_cpu(chip->comm_page->control_register);
+ control_reg &= GML_CLOCK_CLEAR_MASK;
+ control_reg &= GML_SPDIF_RATE_CLEAR_MASK;
+
+ switch (rate) {
+ case 96000:
+ clock = GML_96KHZ;
+ break;
+ case 88200:
+ clock = GML_88KHZ;
+ break;
+ case 48000:
+ clock = GML_48KHZ | GML_SPDIF_SAMPLE_RATE1;
+ break;
+ case 44100:
+ clock = GML_44KHZ;
+ /* Professional mode */
+ if (control_reg & GML_SPDIF_PRO_MODE)
+ clock |= GML_SPDIF_SAMPLE_RATE0;
+ break;
+ case 32000:
+ clock = GML_32KHZ | GML_SPDIF_SAMPLE_RATE0 |
+ GML_SPDIF_SAMPLE_RATE1;
+ break;
+ case 22050:
+ clock = GML_22KHZ;
+ break;
+ case 16000:
+ clock = GML_16KHZ;
+ break;
+ case 11025:
+ clock = GML_11KHZ;
+ break;
+ case 8000:
+ clock = GML_8KHZ;
+ break;
+ default:
+ DE_ACT(("set_sample_rate: %d invalid!\n", rate));
+ return -EINVAL;
+ }
+
+ control_reg |= clock;
+
+ chip->comm_page->sample_rate = cpu_to_le32(rate); /* ignored by the DSP */
+ chip->sample_rate = rate;
+ DE_ACT(("set_sample_rate: %d clock %d\n", rate, clock));
+
+ return write_control_reg(chip, control_reg, force_write);
+}
+
+
+
+static int set_input_clock(struct echoaudio *chip, u16 clock)
+{
+ u32 control_reg, clocks_from_dsp;
+ int err;
+
+ DE_ACT(("set_input_clock:\n"));
+
+ /* Prevent two simultaneous calls to switch_asic() */
+ if (atomic_read(&chip->opencount))
+ return -EAGAIN;
+
+ /* Mask off the clock select bits */
+ control_reg = le32_to_cpu(chip->comm_page->control_register) &
+ GML_CLOCK_CLEAR_MASK;
+ clocks_from_dsp = le32_to_cpu(chip->comm_page->status_clocks);
+
+ switch (clock) {
+ case ECHO_CLOCK_INTERNAL:
+ DE_ACT(("Set Mona clock to INTERNAL\n"));
+ chip->input_clock = ECHO_CLOCK_INTERNAL;
+ return set_sample_rate(chip, chip->sample_rate);
+ case ECHO_CLOCK_SPDIF:
+ if (chip->digital_mode == DIGITAL_MODE_ADAT)
+ return -EAGAIN;
+ spin_unlock_irq(&chip->lock);
+ err = switch_asic(chip, clocks_from_dsp &
+ GML_CLOCK_DETECT_BIT_SPDIF96);
+ spin_lock_irq(&chip->lock);
+ if (err < 0)
+ return err;
+ DE_ACT(("Set Mona clock to SPDIF\n"));
+ control_reg |= GML_SPDIF_CLOCK;
+ if (clocks_from_dsp & GML_CLOCK_DETECT_BIT_SPDIF96)
+ control_reg |= GML_DOUBLE_SPEED_MODE;
+ else
+ control_reg &= ~GML_DOUBLE_SPEED_MODE;
+ break;
+ case ECHO_CLOCK_WORD:
+ DE_ACT(("Set Mona clock to WORD\n"));
+ spin_unlock_irq(&chip->lock);
+ err = switch_asic(chip, clocks_from_dsp &
+ GML_CLOCK_DETECT_BIT_WORD96);
+ spin_lock_irq(&chip->lock);
+ if (err < 0)
+ return err;
+ control_reg |= GML_WORD_CLOCK;
+ if (clocks_from_dsp & GML_CLOCK_DETECT_BIT_WORD96)
+ control_reg |= GML_DOUBLE_SPEED_MODE;
+ else
+ control_reg &= ~GML_DOUBLE_SPEED_MODE;
+ break;
+ case ECHO_CLOCK_ADAT:
+ DE_ACT(("Set Mona clock to ADAT\n"));
+ if (chip->digital_mode != DIGITAL_MODE_ADAT)
+ return -EAGAIN;
+ control_reg |= GML_ADAT_CLOCK;
+ control_reg &= ~GML_DOUBLE_SPEED_MODE;
+ break;
+ default:
+ DE_ACT(("Input clock 0x%x not supported for Mona\n", clock));
+ return -EINVAL;
+ }
+
+ chip->input_clock = clock;
+ return write_control_reg(chip, control_reg, TRUE);
+}
+
+
+
+static int dsp_set_digital_mode(struct echoaudio *chip, u8 mode)
+{
+ u32 control_reg;
+ int err, incompatible_clock;
+
+ /* Set clock to "internal" if it's not compatible with the new mode */
+ incompatible_clock = FALSE;
+ switch (mode) {
+ case DIGITAL_MODE_SPDIF_OPTICAL:
+ case DIGITAL_MODE_SPDIF_RCA:
+ if (chip->input_clock == ECHO_CLOCK_ADAT)
+ incompatible_clock = TRUE;
+ break;
+ case DIGITAL_MODE_ADAT:
+ if (chip->input_clock == ECHO_CLOCK_SPDIF)
+ incompatible_clock = TRUE;
+ break;
+ default:
+ DE_ACT(("Digital mode not supported: %d\n", mode));
+ return -EINVAL;
+ }
+
+ spin_lock_irq(&chip->lock);
+
+ if (incompatible_clock) { /* Switch to 48KHz, internal */
+ chip->sample_rate = 48000;
+ set_input_clock(chip, ECHO_CLOCK_INTERNAL);
+ }
+
+ /* Clear the current digital mode */
+ control_reg = le32_to_cpu(chip->comm_page->control_register);
+ control_reg &= GML_DIGITAL_MODE_CLEAR_MASK;
+
+ /* Tweak the control reg */
+ switch (mode) {
+ case DIGITAL_MODE_SPDIF_OPTICAL:
+ control_reg |= GML_SPDIF_OPTICAL_MODE;
+ break;
+ case DIGITAL_MODE_SPDIF_RCA:
+ /* GML_SPDIF_OPTICAL_MODE bit cleared */
+ break;
+ case DIGITAL_MODE_ADAT:
+ /* If the current ASIC is the 96KHz ASIC, switch the ASIC
+ and set to 48 KHz */
+ if (chip->asic_code == &card_fw[FW_MONA_361_1_ASIC96] ||
+ chip->asic_code == &card_fw[FW_MONA_301_1_ASIC96]) {
+ set_sample_rate(chip, 48000);
+ }
+ control_reg |= GML_ADAT_MODE;
+ control_reg &= ~GML_DOUBLE_SPEED_MODE;
+ break;
+ }
+
+ err = write_control_reg(chip, control_reg, FALSE);
+ spin_unlock_irq(&chip->lock);
+ if (err < 0)
+ return err;
+ chip->digital_mode = mode;
+
+ DE_ACT(("set_digital_mode to %d\n", mode));
+ return incompatible_clock;
+}