diff options
Diffstat (limited to 'sound/soc')
| -rw-r--r-- | sound/soc/qcom/lpass-cpu.c | 79 | ||||
| -rw-r--r-- | sound/soc/qcom/lpass.h | 4 |
2 files changed, 83 insertions, 0 deletions
diff --git a/sound/soc/qcom/lpass-cpu.c b/sound/soc/qcom/lpass-cpu.c index 28c7497344e3..a6e95db6b3fb 100644 --- a/sound/soc/qcom/lpass-cpu.c +++ b/sound/soc/qcom/lpass-cpu.c @@ -93,8 +93,30 @@ static void lpass_cpu_daiops_shutdown(struct snd_pcm_substream *substream, struct snd_soc_dai *dai) { struct lpass_data *drvdata = snd_soc_dai_get_drvdata(dai); + struct lpaif_i2sctl *i2sctl = drvdata->i2sctl; + unsigned int id = dai->driver->id; clk_disable_unprepare(drvdata->mi2s_osr_clk[dai->driver->id]); + /* + * Ensure LRCLK is disabled even in device node validation. + * Will not impact if disabled in lpass_cpu_daiops_trigger() + * suspend. + */ + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + regmap_fields_write(i2sctl->spken, id, LPAIF_I2SCTL_SPKEN_DISABLE); + else + regmap_fields_write(i2sctl->micen, id, LPAIF_I2SCTL_MICEN_DISABLE); + + /* + * BCLK may not be enabled if lpass_cpu_daiops_prepare is called before + * lpass_cpu_daiops_shutdown. It's paired with the clk_enable in + * lpass_cpu_daiops_prepare. + */ + if (drvdata->mi2s_was_prepared[dai->driver->id]) { + drvdata->mi2s_was_prepared[dai->driver->id] = false; + clk_disable(drvdata->mi2s_bit_clk[dai->driver->id]); + } + clk_unprepare(drvdata->mi2s_bit_clk[dai->driver->id]); } @@ -275,6 +297,18 @@ static int lpass_cpu_daiops_trigger(struct snd_pcm_substream *substream, case SNDRV_PCM_TRIGGER_START: case SNDRV_PCM_TRIGGER_RESUME: case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + /* + * Ensure lpass BCLK/LRCLK is enabled during + * device resume as lpass_cpu_daiops_prepare() is not called + * after the device resumes. We don't check mi2s_was_prepared before + * enable/disable BCLK in trigger events because: + * 1. These trigger events are paired, so the BCLK + * enable_count is balanced. + * 2. the BCLK can be shared (ex: headset and headset mic), + * we need to increase the enable_count so that we don't + * turn off the shared BCLK while other devices are using + * it. + */ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { ret = regmap_fields_write(i2sctl->spken, id, LPAIF_I2SCTL_SPKEN_ENABLE); @@ -296,6 +330,10 @@ static int lpass_cpu_daiops_trigger(struct snd_pcm_substream *substream, case SNDRV_PCM_TRIGGER_STOP: case SNDRV_PCM_TRIGGER_SUSPEND: case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + /* + * To ensure lpass BCLK/LRCLK is disabled during + * device suspend. + */ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { ret = regmap_fields_write(i2sctl->spken, id, LPAIF_I2SCTL_SPKEN_DISABLE); @@ -315,12 +353,53 @@ static int lpass_cpu_daiops_trigger(struct snd_pcm_substream *substream, return ret; } +static int lpass_cpu_daiops_prepare(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct lpass_data *drvdata = snd_soc_dai_get_drvdata(dai); + struct lpaif_i2sctl *i2sctl = drvdata->i2sctl; + unsigned int id = dai->driver->id; + int ret; + + /* + * Ensure lpass BCLK/LRCLK is enabled bit before playback/capture + * data flow starts. This allows other codec to have some delay before + * the data flow. + * (ex: to drop start up pop noise before capture starts). + */ + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + ret = regmap_fields_write(i2sctl->spken, id, LPAIF_I2SCTL_SPKEN_ENABLE); + else + ret = regmap_fields_write(i2sctl->micen, id, LPAIF_I2SCTL_MICEN_ENABLE); + + if (ret) { + dev_err(dai->dev, "error writing to i2sctl reg: %d\n", ret); + return ret; + } + + /* + * Check mi2s_was_prepared before enabling BCLK as lpass_cpu_daiops_prepare can + * be called multiple times. It's paired with the clk_disable in + * lpass_cpu_daiops_shutdown. + */ + if (!drvdata->mi2s_was_prepared[dai->driver->id]) { + ret = clk_enable(drvdata->mi2s_bit_clk[id]); + if (ret) { + dev_err(dai->dev, "error in enabling mi2s bit clk: %d\n", ret); + return ret; + } + drvdata->mi2s_was_prepared[dai->driver->id] = true; + } + return 0; +} + const struct snd_soc_dai_ops asoc_qcom_lpass_cpu_dai_ops = { .set_sysclk = lpass_cpu_daiops_set_sysclk, .startup = lpass_cpu_daiops_startup, .shutdown = lpass_cpu_daiops_shutdown, .hw_params = lpass_cpu_daiops_hw_params, .trigger = lpass_cpu_daiops_trigger, + .prepare = lpass_cpu_daiops_prepare, }; EXPORT_SYMBOL_GPL(asoc_qcom_lpass_cpu_dai_ops); diff --git a/sound/soc/qcom/lpass.h b/sound/soc/qcom/lpass.h index 83b2e08ade06..7f72214404ba 100644 --- a/sound/soc/qcom/lpass.h +++ b/sound/soc/qcom/lpass.h @@ -67,6 +67,10 @@ struct lpass_data { /* MI2S SD lines to use for playback/capture */ unsigned int mi2s_playback_sd_mode[LPASS_MAX_MI2S_PORTS]; unsigned int mi2s_capture_sd_mode[LPASS_MAX_MI2S_PORTS]; + + /* The state of MI2S prepare dai_ops was called */ + bool mi2s_was_prepared[LPASS_MAX_MI2S_PORTS]; + int hdmi_port_enable; /* low-power audio interface (LPAIF) registers */ |