summaryrefslogtreecommitdiffstats
path: root/tools/power/x86/turbostat/turbostat.c
diff options
context:
space:
mode:
Diffstat (limited to 'tools/power/x86/turbostat/turbostat.c')
-rw-r--r--tools/power/x86/turbostat/turbostat.c2017
1 files changed, 1651 insertions, 366 deletions
diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c
index 7a334377f92b..98256468e248 100644
--- a/tools/power/x86/turbostat/turbostat.c
+++ b/tools/power/x86/turbostat/turbostat.c
@@ -3,7 +3,7 @@
* turbostat -- show CPU frequency and C-state residency
* on modern Intel and AMD processors.
*
- * Copyright (c) 2023 Intel Corporation.
+ * Copyright (c) 2024 Intel Corporation.
* Len Brown <len.brown@intel.com>
*/
@@ -36,6 +36,8 @@
#include <linux/perf_event.h>
#include <asm/unistd.h>
#include <stdbool.h>
+#include <assert.h>
+#include <linux/kernel.h>
#define UNUSED(x) (void)(x)
@@ -53,9 +55,13 @@
#define NAME_BYTES 20
#define PATH_BYTES 128
+#define MAX_NOFILE 0x8000
+
enum counter_scope { SCOPE_CPU, SCOPE_CORE, SCOPE_PACKAGE };
enum counter_type { COUNTER_ITEMS, COUNTER_CYCLES, COUNTER_SECONDS, COUNTER_USEC };
enum counter_format { FORMAT_RAW, FORMAT_DELTA, FORMAT_PERCENT };
+enum amperf_source { AMPERF_SOURCE_PERF, AMPERF_SOURCE_MSR };
+enum rapl_source { RAPL_SOURCE_NONE, RAPL_SOURCE_PERF, RAPL_SOURCE_MSR };
struct msr_counter {
unsigned int msr_num;
@@ -127,6 +133,9 @@ struct msr_counter bic[] = {
{ 0x0, "IPC", "", 0, 0, 0, NULL, 0 },
{ 0x0, "CoreThr", "", 0, 0, 0, NULL, 0 },
{ 0x0, "UncMHz", "", 0, 0, 0, NULL, 0 },
+ { 0x0, "SAM%mc6", "", 0, 0, 0, NULL, 0 },
+ { 0x0, "SAMMHz", "", 0, 0, 0, NULL, 0 },
+ { 0x0, "SAMAMHz", "", 0, 0, 0, NULL, 0 },
};
#define MAX_BIC (sizeof(bic) / sizeof(struct msr_counter))
@@ -185,11 +194,14 @@ struct msr_counter bic[] = {
#define BIC_IPC (1ULL << 52)
#define BIC_CORE_THROT_CNT (1ULL << 53)
#define BIC_UNCORE_MHZ (1ULL << 54)
+#define BIC_SAM_mc6 (1ULL << 55)
+#define BIC_SAMMHz (1ULL << 56)
+#define BIC_SAMACTMHz (1ULL << 57)
#define BIC_TOPOLOGY (BIC_Package | BIC_Node | BIC_CoreCnt | BIC_PkgCnt | BIC_Core | BIC_CPU | BIC_Die )
#define BIC_THERMAL_PWR ( BIC_CoreTmp | BIC_PkgTmp | BIC_PkgWatt | BIC_CorWatt | BIC_GFXWatt | BIC_RAMWatt | BIC_PKG__ | BIC_RAM__)
-#define BIC_FREQUENCY ( BIC_Avg_MHz | BIC_Busy | BIC_Bzy_MHz | BIC_TSC_MHz | BIC_GFXMHz | BIC_GFXACTMHz | BIC_UNCORE_MHZ)
-#define BIC_IDLE ( BIC_sysfs | BIC_CPU_c1 | BIC_CPU_c3 | BIC_CPU_c6 | BIC_CPU_c7 | BIC_GFX_rc6 | BIC_Pkgpc2 | BIC_Pkgpc3 | BIC_Pkgpc6 | BIC_Pkgpc7 | BIC_Pkgpc8 | BIC_Pkgpc9 | BIC_Pkgpc10 | BIC_CPU_LPI | BIC_SYS_LPI | BIC_Mod_c6 | BIC_Totl_c0 | BIC_Any_c0 | BIC_GFX_c0 | BIC_CPUGFX)
+#define BIC_FREQUENCY (BIC_Avg_MHz | BIC_Busy | BIC_Bzy_MHz | BIC_TSC_MHz | BIC_GFXMHz | BIC_GFXACTMHz | BIC_SAMMHz | BIC_SAMACTMHz | BIC_UNCORE_MHZ)
+#define BIC_IDLE (BIC_sysfs | BIC_CPU_c1 | BIC_CPU_c3 | BIC_CPU_c6 | BIC_CPU_c7 | BIC_GFX_rc6 | BIC_Pkgpc2 | BIC_Pkgpc3 | BIC_Pkgpc6 | BIC_Pkgpc7 | BIC_Pkgpc8 | BIC_Pkgpc9 | BIC_Pkgpc10 | BIC_CPU_LPI | BIC_SYS_LPI | BIC_Mod_c6 | BIC_Totl_c0 | BIC_Any_c0 | BIC_GFX_c0 | BIC_CPUGFX | BIC_SAM_mc6)
#define BIC_OTHER ( BIC_IRQ | BIC_SMI | BIC_ThreadC | BIC_CoreTmp | BIC_IPC)
#define BIC_DISABLED_BY_DEFAULT (BIC_USEC | BIC_TOD | BIC_APIC | BIC_X2APIC)
@@ -204,10 +216,13 @@ unsigned long long bic_present = BIC_USEC | BIC_TOD | BIC_sysfs | BIC_APIC | BIC
#define BIC_NOT_PRESENT(COUNTER_BIT) (bic_present &= ~COUNTER_BIT)
#define BIC_IS_ENABLED(COUNTER_BIT) (bic_enabled & COUNTER_BIT)
+struct amperf_group_fd;
+
char *proc_stat = "/proc/stat";
FILE *outf;
int *fd_percpu;
int *fd_instr_count_percpu;
+struct amperf_group_fd *fd_amperf_percpu; /* File descriptors for perf group with APERF and MPERF counters. */
struct timeval interval_tv = { 5, 0 };
struct timespec interval_ts = { 5, 0 };
@@ -242,11 +257,8 @@ char *output_buffer, *outp;
unsigned int do_dts;
unsigned int do_ptm;
unsigned int do_ipc;
-unsigned long long gfx_cur_rc6_ms;
unsigned long long cpuidle_cur_cpu_lpi_us;
unsigned long long cpuidle_cur_sys_lpi_us;
-unsigned int gfx_cur_mhz;
-unsigned int gfx_act_mhz;
unsigned int tj_max;
unsigned int tj_max_override;
double rapl_power_units, rapl_time_units;
@@ -263,6 +275,28 @@ unsigned int has_hwp_epp; /* IA32_HWP_REQUEST[bits 31:24] */
unsigned int has_hwp_pkg; /* IA32_HWP_REQUEST_PKG */
unsigned int first_counter_read = 1;
int ignore_stdin;
+bool no_msr;
+bool no_perf;
+enum amperf_source amperf_source;
+
+enum gfx_sysfs_idx {
+ GFX_rc6,
+ GFX_MHz,
+ GFX_ACTMHz,
+ SAM_mc6,
+ SAM_MHz,
+ SAM_ACTMHz,
+ GFX_MAX
+};
+
+struct gfx_sysfs_info {
+ const char *path;
+ FILE *fp;
+ unsigned int val;
+ unsigned long long val_ull;
+};
+
+static struct gfx_sysfs_info gfx_info[GFX_MAX];
int get_msr(int cpu, off_t offset, unsigned long long *msr);
@@ -652,6 +686,7 @@ static const struct platform_features icx_features = {
.bclk_freq = BCLK_100MHZ,
.supported_cstates = CC1 | CC6 | PC2 | PC6,
.cst_limit = CST_LIMIT_ICX,
+ .has_msr_core_c1_res = 1,
.has_irtl_msrs = 1,
.has_cst_prewake_bit = 1,
.trl_msrs = TRL_BASE | TRL_CORECOUNT,
@@ -948,6 +983,175 @@ size_t cpu_present_setsize, cpu_effective_setsize, cpu_allowed_setsize, cpu_affi
#define MAX_ADDED_THREAD_COUNTERS 24
#define BITMASK_SIZE 32
+/* Indexes used to map data read from perf and MSRs into global variables */
+enum rapl_rci_index {
+ RAPL_RCI_INDEX_ENERGY_PKG = 0,
+ RAPL_RCI_INDEX_ENERGY_CORES = 1,
+ RAPL_RCI_INDEX_DRAM = 2,
+ RAPL_RCI_INDEX_GFX = 3,
+ RAPL_RCI_INDEX_PKG_PERF_STATUS = 4,
+ RAPL_RCI_INDEX_DRAM_PERF_STATUS = 5,
+ RAPL_RCI_INDEX_CORE_ENERGY = 6,
+ NUM_RAPL_COUNTERS,
+};
+
+enum rapl_unit {
+ RAPL_UNIT_INVALID,
+ RAPL_UNIT_JOULES,
+ RAPL_UNIT_WATTS,
+};
+
+struct rapl_counter_info_t {
+ unsigned long long data[NUM_RAPL_COUNTERS];
+ enum rapl_source source[NUM_RAPL_COUNTERS];
+ unsigned long long flags[NUM_RAPL_COUNTERS];
+ double scale[NUM_RAPL_COUNTERS];
+ enum rapl_unit unit[NUM_RAPL_COUNTERS];
+
+ union {
+ /* Active when source == RAPL_SOURCE_MSR */
+ struct {
+ unsigned long long msr[NUM_RAPL_COUNTERS];
+ unsigned long long msr_mask[NUM_RAPL_COUNTERS];
+ int msr_shift[NUM_RAPL_COUNTERS];
+ };
+ };
+
+ int fd_perf;
+};
+
+/* struct rapl_counter_info_t for each RAPL domain */
+struct rapl_counter_info_t *rapl_counter_info_perdomain;
+
+#define RAPL_COUNTER_FLAG_USE_MSR_SUM (1u << 1)
+
+struct rapl_counter_arch_info {
+ int feature_mask; /* Mask for testing if the counter is supported on host */
+ const char *perf_subsys;
+ const char *perf_name;
+ unsigned long long msr;
+ unsigned long long msr_mask;
+ int msr_shift; /* Positive mean shift right, negative mean shift left */
+ double *platform_rapl_msr_scale; /* Scale applied to values read by MSR (platform dependent, filled at runtime) */
+ unsigned int rci_index; /* Maps data from perf counters to global variables */
+ unsigned long long bic;
+ double compat_scale; /* Some counters require constant scaling to be in the same range as other, similar ones */
+ unsigned long long flags;
+};
+
+static const struct rapl_counter_arch_info rapl_counter_arch_infos[] = {
+ {
+ .feature_mask = RAPL_PKG,
+ .perf_subsys = "power",
+ .perf_name = "energy-pkg",
+ .msr = MSR_PKG_ENERGY_STATUS,
+ .msr_mask = 0xFFFFFFFFFFFFFFFF,
+ .msr_shift = 0,
+ .platform_rapl_msr_scale = &rapl_energy_units,
+ .rci_index = RAPL_RCI_INDEX_ENERGY_PKG,
+ .bic = BIC_PkgWatt | BIC_Pkg_J,
+ .compat_scale = 1.0,
+ .flags = RAPL_COUNTER_FLAG_USE_MSR_SUM,
+ },
+ {
+ .feature_mask = RAPL_AMD_F17H,
+ .perf_subsys = "power",
+ .perf_name = "energy-pkg",
+ .msr = MSR_PKG_ENERGY_STAT,
+ .msr_mask = 0xFFFFFFFFFFFFFFFF,
+ .msr_shift = 0,
+ .platform_rapl_msr_scale = &rapl_energy_units,
+ .rci_index = RAPL_RCI_INDEX_ENERGY_PKG,
+ .bic = BIC_PkgWatt | BIC_Pkg_J,
+ .compat_scale = 1.0,
+ .flags = RAPL_COUNTER_FLAG_USE_MSR_SUM,
+ },
+ {
+ .feature_mask = RAPL_CORE_ENERGY_STATUS,
+ .perf_subsys = "power",
+ .perf_name = "energy-cores",
+ .msr = MSR_PP0_ENERGY_STATUS,
+ .msr_mask = 0xFFFFFFFFFFFFFFFF,
+ .msr_shift = 0,
+ .platform_rapl_msr_scale = &rapl_energy_units,
+ .rci_index = RAPL_RCI_INDEX_ENERGY_CORES,
+ .bic = BIC_CorWatt | BIC_Cor_J,
+ .compat_scale = 1.0,
+ .flags = RAPL_COUNTER_FLAG_USE_MSR_SUM,
+ },
+ {
+ .feature_mask = RAPL_DRAM,
+ .perf_subsys = "power",
+ .perf_name = "energy-ram",
+ .msr = MSR_DRAM_ENERGY_STATUS,
+ .msr_mask = 0xFFFFFFFFFFFFFFFF,
+ .msr_shift = 0,
+ .platform_rapl_msr_scale = &rapl_dram_energy_units,
+ .rci_index = RAPL_RCI_INDEX_DRAM,
+ .bic = BIC_RAMWatt | BIC_RAM_J,
+ .compat_scale = 1.0,
+ .flags = RAPL_COUNTER_FLAG_USE_MSR_SUM,
+ },
+ {
+ .feature_mask = RAPL_GFX,
+ .perf_subsys = "power",
+ .perf_name = "energy-gpu",
+ .msr = MSR_PP1_ENERGY_STATUS,
+ .msr_mask = 0xFFFFFFFFFFFFFFFF,
+ .msr_shift = 0,
+ .platform_rapl_msr_scale = &rapl_energy_units,
+ .rci_index = RAPL_RCI_INDEX_GFX,
+ .bic = BIC_GFXWatt | BIC_GFX_J,
+ .compat_scale = 1.0,
+ .flags = RAPL_COUNTER_FLAG_USE_MSR_SUM,
+ },
+ {
+ .feature_mask = RAPL_PKG_PERF_STATUS,
+ .perf_subsys = NULL,
+ .perf_name = NULL,
+ .msr = MSR_PKG_PERF_STATUS,
+ .msr_mask = 0xFFFFFFFFFFFFFFFF,
+ .msr_shift = 0,
+ .platform_rapl_msr_scale = &rapl_time_units,
+ .rci_index = RAPL_RCI_INDEX_PKG_PERF_STATUS,
+ .bic = BIC_PKG__,
+ .compat_scale = 100.0,
+ .flags = RAPL_COUNTER_FLAG_USE_MSR_SUM,
+ },
+ {
+ .feature_mask = RAPL_DRAM_PERF_STATUS,
+ .perf_subsys = NULL,
+ .perf_name = NULL,
+ .msr = MSR_DRAM_PERF_STATUS,
+ .msr_mask = 0xFFFFFFFFFFFFFFFF,
+ .msr_shift = 0,
+ .platform_rapl_msr_scale = &rapl_time_units,
+ .rci_index = RAPL_RCI_INDEX_DRAM_PERF_STATUS,
+ .bic = BIC_RAM__,
+ .compat_scale = 100.0,
+ .flags = RAPL_COUNTER_FLAG_USE_MSR_SUM,
+ },
+ {
+ .feature_mask = RAPL_AMD_F17H,
+ .perf_subsys = NULL,
+ .perf_name = NULL,
+ .msr = MSR_CORE_ENERGY_STAT,
+ .msr_mask = 0xFFFFFFFF,
+ .msr_shift = 0,
+ .platform_rapl_msr_scale = &rapl_energy_units,
+ .rci_index = RAPL_RCI_INDEX_CORE_ENERGY,
+ .bic = BIC_CorWatt | BIC_Cor_J,
+ .compat_scale = 1.0,
+ .flags = 0,
+ },
+};
+
+struct rapl_counter {
+ unsigned long long raw_value;
+ enum rapl_unit unit;
+ double scale;
+};
+
struct thread_data {
struct timeval tv_begin;
struct timeval tv_end;
@@ -974,7 +1178,7 @@ struct core_data {
unsigned long long c7;
unsigned long long mc6_us; /* duplicate as per-core for now, even though per module */
unsigned int core_temp_c;
- unsigned int core_energy; /* MSR_CORE_ENERGY_STAT */
+ struct rapl_counter core_energy; /* MSR_CORE_ENERGY_STAT */
unsigned int core_id;
unsigned long long core_throt_cnt;
unsigned long long counter[MAX_ADDED_COUNTERS];
@@ -989,8 +1193,8 @@ struct pkg_data {
unsigned long long pc8;
unsigned long long pc9;
unsigned long long pc10;
- unsigned long long cpu_lpi;
- unsigned long long sys_lpi;
+ long long cpu_lpi;
+ long long sys_lpi;
unsigned long long pkg_wtd_core_c0;
unsigned long long pkg_any_core_c0;
unsigned long long pkg_any_gfxe_c0;
@@ -998,13 +1202,16 @@ struct pkg_data {
long long gfx_rc6_ms;
unsigned int gfx_mhz;
unsigned int gfx_act_mhz;
+ long long sam_mc6_ms;
+ unsigned int sam_mhz;
+ unsigned int sam_act_mhz;
unsigned int package_id;
- unsigned long long energy_pkg; /* MSR_PKG_ENERGY_STATUS */
- unsigned long long energy_dram; /* MSR_DRAM_ENERGY_STATUS */
- unsigned long long energy_cores; /* MSR_PP0_ENERGY_STATUS */
- unsigned long long energy_gfx; /* MSR_PP1_ENERGY_STATUS */
- unsigned long long rapl_pkg_perf_status; /* MSR_PKG_PERF_STATUS */
- unsigned long long rapl_dram_perf_status; /* MSR_DRAM_PERF_STATUS */
+ struct rapl_counter energy_pkg; /* MSR_PKG_ENERGY_STATUS */
+ struct rapl_counter energy_dram; /* MSR_DRAM_ENERGY_STATUS */
+ struct rapl_counter energy_cores; /* MSR_PP0_ENERGY_STATUS */
+ struct rapl_counter energy_gfx; /* MSR_PP1_ENERGY_STATUS */
+ struct rapl_counter rapl_pkg_perf_status; /* MSR_PKG_PERF_STATUS */
+ struct rapl_counter rapl_dram_perf_status; /* MSR_DRAM_PERF_STATUS */
unsigned int pkg_temp_c;
unsigned int uncore_mhz;
unsigned long long counter[MAX_ADDED_COUNTERS];
@@ -1150,6 +1357,38 @@ struct sys_counters {
struct msr_counter *pp;
} sys;
+void free_sys_counters(void)
+{
+ struct msr_counter *p = sys.tp, *pnext = NULL;
+
+ while (p) {
+ pnext = p->next;
+ free(p);
+ p = pnext;
+ }
+
+ p = sys.cp, pnext = NULL;
+ while (p) {
+ pnext = p->next;
+ free(p);
+ p = pnext;
+ }
+
+ p = sys.pp, pnext = NULL;
+ while (p) {
+ pnext = p->next;
+ free(p);
+ p = pnext;
+ }
+
+ sys.added_thread_counters = 0;
+ sys.added_core_counters = 0;
+ sys.added_package_counters = 0;
+ sys.tp = NULL;
+ sys.cp = NULL;
+ sys.pp = NULL;
+}
+
struct system_summary {
struct thread_data threads;
struct core_data cores;
@@ -1280,34 +1519,60 @@ int get_msr_fd(int cpu)
sprintf(pathname, "/dev/cpu/%d/msr", cpu);
fd = open(pathname, O_RDONLY);
if (fd < 0)
- err(-1, "%s open failed, try chown or chmod +r /dev/cpu/*/msr, or run as root", pathname);
+ err(-1, "%s open failed, try chown or chmod +r /dev/cpu/*/msr, "
+ "or run with --no-msr, or run as root", pathname);
fd_percpu[cpu] = fd;
return fd;
}
+static void bic_disable_msr_access(void)
+{
+ const unsigned long bic_msrs =
+ BIC_SMI |
+ BIC_CPU_c1 |
+ BIC_CPU_c3 |
+ BIC_CPU_c6 |
+ BIC_CPU_c7 |
+ BIC_Mod_c6 |
+ BIC_CoreTmp |
+ BIC_Totl_c0 |
+ BIC_Any_c0 |
+ BIC_GFX_c0 |
+ BIC_CPUGFX |
+ BIC_Pkgpc2 | BIC_Pkgpc3 | BIC_Pkgpc6 | BIC_Pkgpc7 | BIC_Pkgpc8 | BIC_Pkgpc9 | BIC_Pkgpc10 | BIC_PkgTmp;
+
+ bic_enabled &= ~bic_msrs;
+
+ free_sys_counters();
+}
+
static long perf_event_open(struct perf_event_attr *hw_event, pid_t pid, int cpu, int group_fd, unsigned long flags)
{
+ assert(!no_perf);
+
return syscall(__NR_perf_event_open, hw_event, pid, cpu, group_fd, flags);
}
-static int perf_instr_count_open(int cpu_num)
+static long open_perf_counter(int cpu, unsigned int type, unsigned int config, int group_fd, __u64 read_format)
{
- struct perf_event_attr pea;
- int fd;
+ struct perf_event_attr attr;
+ const pid_t pid = -1;
+ const unsigned long flags = 0;
- memset(&pea, 0, sizeof(struct perf_event_attr));
- pea.type = PERF_TYPE_HARDWARE;
- pea.size = sizeof(struct perf_event_attr);
- pea.config = PERF_COUNT_HW_INSTRUCTIONS;
+ assert(!no_perf);
- /* counter for cpu_num, including user + kernel and all processes */
- fd = perf_event_open(&pea, -1, cpu_num, -1, 0);
- if (fd == -1) {
- warnx("capget(CAP_PERFMON) failed, try \"# setcap cap_sys_admin=ep %s\"", progname);
- BIC_NOT_PRESENT(BIC_IPC);
- }
+ memset(&attr, 0, sizeof(struct perf_event_attr));
+
+ attr.type = type;
+ attr.size = sizeof(struct perf_event_attr);
+ attr.config = config;
+ attr.disabled = 0;
+ attr.sample_type = PERF_SAMPLE_IDENTIFIER;
+ attr.read_format = read_format;
+
+ const int fd = perf_event_open(&attr, pid, cpu, group_fd, flags);
return fd;
}
@@ -1317,7 +1582,7 @@ int get_instr_count_fd(int cpu)
if (fd_instr_count_percpu[cpu])
return fd_instr_count_percpu[cpu];
- fd_instr_count_percpu[cpu] = perf_instr_count_open(cpu);
+ fd_instr_count_percpu[cpu] = open_perf_counter(cpu, PERF_TYPE_HARDWARE, PERF_COUNT_HW_INSTRUCTIONS, -1, 0);
return fd_instr_count_percpu[cpu];
}
@@ -1326,6 +1591,8 @@ int get_msr(int cpu, off_t offset, unsigned long long *msr)
{
ssize_t retval;
+ assert(!no_msr);
+
retval = pread(get_msr_fd(cpu), msr, sizeof(*msr), offset);
if (retval != sizeof *msr)
@@ -1334,6 +1601,21 @@ int get_msr(int cpu, off_t offset, unsigned long long *msr)
return 0;
}
+int probe_msr(int cpu, off_t offset)
+{
+ ssize_t retval;
+ unsigned long long dummy;
+
+ assert(!no_msr);
+
+ retval = pread(get_msr_fd(cpu), &dummy, sizeof(dummy), offset);
+
+ if (retval != sizeof(dummy))
+ return 1;
+
+ return 0;
+}
+
#define MAX_DEFERRED 16
char *deferred_add_names[MAX_DEFERRED];
char *deferred_skip_names[MAX_DEFERRED];
@@ -1369,6 +1651,8 @@ void help(void)
" Override default 5-second measurement interval\n"
" -J, --Joules displays energy in Joules instead of Watts\n"
" -l, --list list column headers only\n"
+ " -M, --no-msr Disable all uses of the MSR driver\n"
+ " -P, --no-perf Disable all uses of the perf API\n"
" -n, --num_iterations num\n"
" number of the measurement iterations\n"
" -N, --header_iterations num\n"
@@ -1573,6 +1857,15 @@ void print_header(char *delim)
if (DO_BIC(BIC_GFXACTMHz))
outp += sprintf(outp, "%sGFXAMHz", (printed++ ? delim : ""));
+ if (DO_BIC(BIC_SAM_mc6))
+ outp += sprintf(outp, "%sSAM%%mc6", (printed++ ? delim : ""));
+
+ if (DO_BIC(BIC_SAMMHz))
+ outp += sprintf(outp, "%sSAMMHz", (printed++ ? delim : ""));
+
+ if (DO_BIC(BIC_SAMACTMHz))
+ outp += sprintf(outp, "%sSAMAMHz", (printed++ ? delim : ""));
+
if (DO_BIC(BIC_Totl_c0))
outp += sprintf(outp, "%sTotl%%C0", (printed++ ? delim : ""));
if (DO_BIC(BIC_Any_c0))
@@ -1671,26 +1964,35 @@ int dump_counters(struct thread_data *t, struct core_data *c, struct pkg_data *p
outp += sprintf(outp, "SMI: %d\n", t->smi_count);
for (i = 0, mp = sys.tp; mp; i++, mp = mp->next) {
- outp += sprintf(outp, "tADDED [%d] msr0x%x: %08llX\n", i, mp->msr_num, t->counter[i]);
+ outp +=
+ sprintf(outp, "tADDED [%d] %8s msr0x%x: %08llX %s\n", i, mp->name, mp->msr_num,
+ t->counter[i], mp->path);
}
}
- if (c) {
+ if (c && is_cpu_first_thread_in_core(t, c, p)) {
outp += sprintf(outp, "core: %d\n", c->core_id);
outp += sprintf(outp, "c3: %016llX\n", c->c3);
outp += sprintf(outp, "c6: %016llX\n", c->c6);
outp += sprintf(outp, "c7: %016llX\n", c->c7);
outp += sprintf(outp, "DTS: %dC\n", c->core_temp_c);
outp += sprintf(outp, "cpu_throt_count: %016llX\n", c->core_throt_cnt);
- outp += sprintf(outp, "Joules: %0X\n", c->core_energy);
+
+ const unsigned long long energy_value = c->core_energy.raw_value * c->core_energy.scale;
+ const double energy_scale = c->core_energy.scale;
+
+ if (c->core_energy.unit == RAPL_UNIT_JOULES)
+ outp += sprintf(outp, "Joules: %0llX (scale: %lf)\n", energy_value, energy_scale);
for (i = 0, mp = sys.cp; mp; i++, mp = mp->next) {
- outp += sprintf(outp, "cADDED [%d] msr0x%x: %08llX\n", i, mp->msr_num, c->counter[i]);
+ outp +=
+ sprintf(outp, "cADDED [%d] %8s msr0x%x: %08llX %s\n", i, mp->name, mp->msr_num,
+ c->counter[i], mp->path);
}
outp += sprintf(outp, "mc6_us: %016llX\n", c->mc6_us);
}
- if (p) {
+ if (p && is_cpu_first_core_in_package(t, c, p)) {
outp += sprintf(outp, "package: %d\n", p->package_id);
outp += sprintf(outp, "Weighted cores: %016llX\n", p->pkg_wtd_core_c0);
@@ -1710,16 +2012,18 @@ int dump_counters(struct thread_data *t, struct core_data *c, struct pkg_data *p
outp += sprintf(outp, "pc10: %016llX\n", p->pc10);
outp += sprintf(outp, "cpu_lpi: %016llX\n", p->cpu_lpi);
outp += sprintf(outp, "sys_lpi: %016llX\n", p->sys_lpi);
- outp += sprintf(outp, "Joules PKG: %0llX\n", p->energy_pkg);
- outp += sprintf(outp, "Joules COR: %0llX\n", p->energy_cores);
- outp += sprintf(outp, "Joules GFX: %0llX\n", p->energy_gfx);
- outp += sprintf(outp, "Joules RAM: %0llX\n", p->energy_dram);
- outp += sprintf(outp, "Throttle PKG: %0llX\n", p->rapl_pkg_perf_status);
- outp += sprintf(outp, "Throttle RAM: %0llX\n", p->rapl_dram_perf_status);
+ outp += sprintf(outp, "Joules PKG: %0llX\n", p->energy_pkg.raw_value);
+ outp += sprintf(outp, "Joules COR: %0llX\n", p->energy_cores.raw_value);
+ outp += sprintf(outp, "Joules GFX: %0llX\n", p->energy_gfx.raw_value);
+ outp += sprintf(outp, "Joules RAM: %0llX\n", p->energy_dram.raw_value);
+ outp += sprintf(outp, "Throttle PKG: %0llX\n", p->rapl_pkg_perf_status.raw_value);
+ outp += sprintf(outp, "Throttle RAM: %0llX\n", p->rapl_dram_perf_status.raw_value);
outp += sprintf(outp, "PTM: %dC\n", p->pkg_temp_c);
for (i = 0, mp = sys.pp; mp; i++, mp = mp->next) {
- outp += sprintf(outp, "pADDED [%d] msr0x%x: %08llX\n", i, mp->msr_num, p->counter[i]);
+ outp +=
+ sprintf(outp, "pADDED [%d] %8s msr0x%x: %08llX %s\n", i, mp->name, mp->msr_num,
+ p->counter[i], mp->path);
}
}
@@ -1728,6 +2032,23 @@ int dump_counters(struct thread_data *t, struct core_data *c, struct pkg_data *p
return 0;
}
+double rapl_counter_get_value(const struct rapl_counter *c, enum rapl_unit desired_unit, double interval)
+{
+ assert(desired_unit != RAPL_UNIT_INVALID);
+
+ /*
+ * For now we don't expect anything other than joules,
+ * so just simplify the logic.
+ */
+ assert(c->unit == RAPL_UNIT_JOULES);
+
+ const double scaled = c->raw_value * c->scale;
+
+ if (desired_unit == RAPL_UNIT_WATTS)
+ return scaled / interval;
+ return scaled;
+}
+
/*
* column formatting convention & formats
*/
@@ -1921,9 +2242,11 @@ int format_counters(struct thread_data *t, struct core_data *c, struct pkg_data
if (DO_BIC(BIC_CorWatt) && platform->has_per_core_rapl)
outp +=
- sprintf(outp, fmt8, (printed++ ? delim : ""), c->core_energy * rapl_energy_units / interval_float);
+ sprintf(outp, fmt8, (printed++ ? delim : ""),
+ rapl_counter_get_value(&c->core_energy, RAPL_UNIT_WATTS, interval_float));
if (DO_BIC(BIC_Cor_J) && platform->has_per_core_rapl)
- outp += sprintf(outp, fmt8, (printed++ ? delim : ""), c->core_energy * rapl_energy_units);
+ outp += sprintf(outp, fmt8, (printed++ ? delim : ""),
+ rapl_counter_get_value(&c->core_energy, RAPL_UNIT_JOULES, interval_float));
/* print per-package data only for 1st core in package */
if (!is_cpu_first_core_in_package(t, c, p))
@@ -1951,6 +2274,24 @@ int format_counters(struct thread_data *t, struct core_data *c, struct pkg_data
if (DO_BIC(BIC_GFXACTMHz))
outp += sprintf(outp, "%s%d", (printed++ ? delim : ""), p->gfx_act_mhz);
+ /* SAMmc6 */
+ if (DO_BIC(BIC_SAM_mc6)) {
+ if (p->sam_mc6_ms == -1) { /* detect GFX counter reset */
+ outp += sprintf(outp, "%s**.**", (printed++ ? delim : ""));
+ } else {
+ outp += sprintf(outp, "%s%.2f", (printed++ ? delim : ""),
+ p->sam_mc6_ms / 10.0 / interval_float);
+ }
+ }
+
+ /* SAMMHz */
+ if (DO_BIC(BIC_SAMMHz))
+ outp += sprintf(outp, "%s%d", (printed++ ? delim : ""), p->sam_mhz);
+
+ /* SAMACTMHz */
+ if (DO_BIC(BIC_SAMACTMHz))
+ outp += sprintf(outp, "%s%d", (printed++ ? delim : ""), p->sam_act_mhz);
+
/* Totl%C0, Any%C0 GFX%C0 CPUGFX% */
if (DO_BIC(BIC_Totl_c0))
outp += sprintf(outp, "%s%.2f", (printed++ ? delim : ""), 100.0 * p->pkg_wtd_core_c0 / tsc);
@@ -1976,43 +2317,59 @@ int format_counters(struct thread_data *t, struct core_data *c, struct pkg_data
if (DO_BIC(BIC_Pkgpc10))
outp += sprintf(outp, "%s%.2f", (printed++ ? delim : ""), 100.0 * p->pc10 / tsc);
- if (DO_BIC(BIC_CPU_LPI))
- outp +=
- sprintf(outp, "%s%.2f", (printed++ ? delim : ""), 100.0 * p->cpu_lpi / 1000000.0 / interval_float);
- if (DO_BIC(BIC_SYS_LPI))
- outp +=
- sprintf(outp, "%s%.2f", (printed++ ? delim : ""), 100.0 * p->sys_lpi / 1000000.0 / interval_float);
+ if (DO_BIC(BIC_CPU_LPI)) {
+ if (p->cpu_lpi >= 0)
+ outp +=
+ sprintf(outp, "%s%.2f", (printed++ ? delim : ""),
+ 100.0 * p->cpu_lpi / 1000000.0 / interval_float);
+ else
+ outp += sprintf(outp, "%s(neg)", (printed++ ? delim : ""));
+ }
+ if (DO_BIC(BIC_SYS_LPI)) {
+ if (p->sys_lpi >= 0)
+ outp +=
+ sprintf(outp, "%s%.2f", (printed++ ? delim : ""),
+ 100.0 * p->sys_lpi / 1000000.0 / interval_float);
+ else
+ outp += sprintf(outp, "%s(neg)", (printed++ ? delim : ""));
+ }
if (DO_BIC(BIC_PkgWatt))
outp +=
- sprintf(outp, fmt8, (printed++ ? delim : ""), p->energy_pkg * rapl_energy_units / interval_float);
-
+ sprintf(outp, fmt8, (printed++ ? delim : ""),
+ rapl_counter_get_value(&p->energy_pkg, RAPL_UNIT_WATTS, interval_float));
if (DO_BIC(BIC_CorWatt) && !platform->has_per_core_rapl)
outp +=
- sprintf(outp, fmt8, (printed++ ? delim : ""), p->energy_cores * rapl_energy_units / interval_float);
+ sprintf(outp, fmt8, (printed++ ? delim : ""),
+ rapl_counter_get_value(&p->energy_cores, RAPL_UNIT_WATTS, interval_float));
if (DO_BIC(BIC_GFXWatt))
outp +=
- sprintf(outp, fmt8, (printed++ ? delim : ""), p->energy_gfx * rapl_energy_units / interval_float);
+ sprintf(outp, fmt8, (printed++ ? delim : ""),
+ rapl_counter_get_value(&p->energy_gfx, RAPL_UNIT_WATTS, interval_float));
if (DO_BIC(BIC_RAMWatt))
outp +=
sprintf(outp, fmt8, (printed++ ? delim : ""),
- p->energy_dram * rapl_dram_energy_units / interval_float);
+ rapl_counter_get_value(&p->energy_dram, RAPL_UNIT_WATTS, interval_float));
if (DO_BIC(BIC_Pkg_J))
- outp += sprintf(outp, fmt8, (printed++ ? delim : ""), p->energy_pkg * rapl_energy_units);
+ outp += sprintf(outp, fmt8, (printed++ ? delim : ""),
+ rapl_counter_get_value(&p->energy_pkg, RAPL_UNIT_JOULES, interval_float));
if (DO_BIC(BIC_Cor_J) && !platform->has_per_core_rapl)
- outp += sprintf(outp, fmt8, (printed++ ? delim : ""), p->energy_cores * rapl_energy_units);
+ outp += sprintf(outp, fmt8, (printed++ ? delim : ""),
+ rapl_counter_get_value(&p->energy_cores, RAPL_UNIT_JOULES, interval_float));
if (DO_BIC(BIC_GFX_J))
- outp += sprintf(outp, fmt8, (printed++ ? delim : ""), p->energy_gfx * rapl_energy_units);
+ outp += sprintf(outp, fmt8, (printed++ ? delim : ""),
+ rapl_counter_get_value(&p->energy_gfx, RAPL_UNIT_JOULES, interval_float));
if (DO_BIC(BIC_RAM_J))
- outp += sprintf(outp, fmt8, (printed++ ? delim : ""), p->energy_dram * rapl_dram_energy_units);
+ outp += sprintf(outp, fmt8, (printed++ ? delim : ""),
+ rapl_counter_get_value(&p->energy_dram, RAPL_UNIT_JOULES, interval_float));
if (DO_BIC(BIC_PKG__))
outp +=
sprintf(outp, fmt8, (printed++ ? delim : ""),
- 100.0 * p->rapl_pkg_perf_status * rapl_time_units / interval_float);
+ rapl_counter_get_value(&p->rapl_pkg_perf_status, RAPL_UNIT_WATTS, interval_float));
if (DO_BIC(BIC_RAM__))
outp +=
sprintf(outp, fmt8, (printed++ ? delim : ""),
- 100.0 * p->rapl_dram_perf_status * rapl_time_units / interval_float);
+ rapl_counter_get_value(&p->rapl_dram_perf_status, RAPL_UNIT_WATTS, interval_float));
/* UncMHz */
if (DO_BIC(BIC_UNCORE_MHZ))
outp += sprintf(outp, "%s%d", (printed++ ? delim : ""), p->uncore_mhz);
@@ -2121,12 +2478,22 @@ int delta_package(struct pkg_data *new, struct pkg_data *old)
old->gfx_mhz = new->gfx_mhz;
old->gfx_act_mhz = new->gfx_act_mhz;
- old->energy_pkg = new->energy_pkg - old->energy_pkg;
- old->energy_cores = new->energy_cores - old->energy_cores;
- old->energy_gfx = new->energy_gfx - old->energy_gfx;
- old->energy_dram = new->energy_dram - old->energy_dram;
- old->rapl_pkg_perf_status = new->rapl_pkg_perf_status - old->rapl_pkg_perf_status;
- old->rapl_dram_perf_status = new->rapl_dram_perf_status - old->rapl_dram_perf_status;
+ /* flag an error when mc6 counter resets/wraps */
+ if (old->sam_mc6_ms > new->sam_mc6_ms)
+ old->sam_mc6_ms = -1;
+ else
+ old->sam_mc6_ms = new->sam_mc6_ms - old->sam_mc6_ms;
+
+ old->sam_mhz = new->sam_mhz;
+ old->sam_act_mhz = new->sam_act_mhz;
+
+ old->energy_pkg.raw_value = new->energy_pkg.raw_value - old->energy_pkg.raw_value;
+ old->energy_cores.raw_value = new->energy_cores.raw_value - old->energy_cores.raw_value;
+ old->energy_gfx.raw_value = new->energy_gfx.raw_value - old->energy_gfx.raw_value;
+ old->energy_dram.raw_value = new->energy_dram.raw_value - old->energy_dram.raw_value;
+ old->rapl_pkg_perf_status.raw_value = new->rapl_pkg_perf_status.raw_value - old->rapl_pkg_perf_status.raw_value;
+ old->rapl_dram_perf_status.raw_value =
+ new->rapl_dram_perf_status.raw_value - old->rapl_dram_perf_status.raw_value;
for (i = 0, mp = sys.pp; mp; i++, mp = mp->next) {
if (mp->format == FORMAT_RAW)
@@ -2150,7 +2517,7 @@ void delta_core(struct core_data *new, struct core_data *old)
old->core_throt_cnt = new->core_throt_cnt;
old->mc6_us = new->mc6_us - old->mc6_us;
- DELTA_WRAP32(new->core_energy, old->core_energy);
+ DELTA_WRAP32(new->core_energy.raw_value, old->core_energy.raw_value);
for (i = 0, mp = sys.cp; mp; i++, mp = mp->next) {
if (mp->format == FORMAT_RAW)
@@ -2277,6 +2644,13 @@ int delta_cpu(struct thread_data *t, struct core_data *c,
return retval;
}
+void rapl_counter_clear(struct rapl_counter *c)
+{
+ c->raw_value = 0;
+ c->scale = 0.0;
+ c->unit = RAPL_UNIT_INVALID;
+}
+
void clear_counters(struct thread_data *t, struct core_data *c, struct pkg_data *p)
{
int i;
@@ -2304,7 +2678,7 @@ void clear_counters(struct thread_data *t, struct core_data *c, struct pkg_data
c->c7 = 0;
c->mc6_us = 0;
c->core_temp_c = 0;
- c->core_energy = 0;
+ rapl_counter_clear(&c->core_energy);
c->core_throt_cnt = 0;
p->pkg_wtd_core_c0 = 0;
@@ -2325,18 +2699,21 @@ void clear_counters(struct thread_data *t, struct core_data *c, struct pkg_data
p->cpu_lpi = 0;
p->sys_lpi = 0;
- p->energy_pkg = 0;
- p->energy_dram = 0;
- p->energy_cores = 0;
- p->energy_gfx = 0;
- p->rapl_pkg_perf_status = 0;
- p->rapl_dram_perf_status = 0;
+ rapl_counter_clear(&p->energy_pkg);
+ rapl_counter_clear(&p->energy_dram);
+ rapl_counter_clear(&p->energy_cores);
+ rapl_counter_clear(&p->energy_gfx);
+ rapl_counter_clear(&p->rapl_pkg_perf_status);
+ rapl_counter_clear(&p->rapl_dram_perf_status);
p->pkg_temp_c = 0;
p->gfx_rc6_ms = 0;
p->uncore_mhz = 0;
p->gfx_mhz = 0;
p->gfx_act_mhz = 0;
+ p->sam_mc6_ms = 0;
+ p->sam_mhz = 0;
+ p->sam_act_mhz = 0;
for (i = 0, mp = sys.tp; mp; i++, mp = mp->next)
t->counter[i] = 0;
@@ -2347,6 +2724,20 @@ void clear_counters(struct thread_data *t, struct core_data *c, struct pkg_data
p->counter[i] = 0;
}
+void rapl_counter_accumulate(struct rapl_counter *dst, const struct rapl_counter *src)
+{
+ /* Copy unit and scale from src if dst is not initialized */
+ if (dst->unit == RAPL_UNIT_INVALID) {
+ dst->unit = src->unit;
+ dst->scale = src->scale;
+ }
+
+ assert(dst->unit == src->unit);
+ assert(dst->scale == src->scale);
+
+ dst->raw_value += src->raw_value;
+}
+
int sum_counters(struct thread_data *t, struct core_data *c, struct pkg_data *p)
{
int i;
@@ -2393,7 +2784,7 @@ int sum_counters(struct thread_data *t, struct core_data *c, struct pkg_data *p)
average.cores.core_temp_c = MAX(average.cores.core_temp_c, c->core_temp_c);
average.cores.core_throt_cnt = MAX(average.cores.core_throt_cnt, c->core_throt_cnt);
- average.cores.core_energy += c->core_energy;
+ rapl_counter_accumulate(&average.cores.core_energy, &c->core_energy);
for (i = 0, mp = sys.cp; mp; i++, mp = mp->next) {
if (mp->format == FORMAT_RAW)
@@ -2428,25 +2819,29 @@ int sum_counters(struct thread_data *t, struct core_data *c, struct pkg_data *p)
average.packages.cpu_lpi = p->cpu_lpi;
average.packages.sys_lpi = p->sys_lpi;
- average.packages.energy_pkg += p->energy_pkg;
- average.packages.energy_dram += p->energy_dram;
- average.packages.energy_cores += p->energy_cores;
- average.packages.energy_gfx += p->energy_gfx;
+ rapl_counter_accumulate(&average.packages.energy_pkg, &p->energy_pkg);
+ rapl_counter_accumulate(&average.packages.energy_dram, &p->energy_dram);
+ rapl_counter_accumulate(&average.packages.energy_cores, &p->energy_cores);
+ rapl_counter_accumulate(&average.packages.energy_gfx, &p->energy_gfx);
average.packages.gfx_rc6_ms = p->gfx_rc6_ms;
average.packages.uncore_mhz = p->uncore_mhz;
average.packages.gfx_mhz = p->gfx_mhz;
average.packages.gfx_act_mhz = p->gfx_act_mhz;
+ average.packages.sam_mc6_ms = p->sam_mc6_ms;
+ average.packages.sam_mhz = p->sam_mhz;
+ average.packages.sam_act_mhz = p->sam_act_mhz;
average.packages.pkg_temp_c = MAX(average.packages.pkg_temp_c, p->pkg_temp_c);
- average.packages.rapl_pkg_perf_status += p->rapl_pkg_perf_status;
- average.packages.rapl_dram_perf_status += p->rapl_dram_perf_status;
+ rapl_counter_accumulate(&average.packages.rapl_pkg_perf_status, &p->rapl_pkg_perf_status);
+ rapl_counter_accumulate(&average.packages.rapl_dram_perf_status, &p->rapl_dram_perf_status);
for (i = 0, mp = sys.pp; mp; i++, mp = mp->next) {
- if (mp->format == FORMAT_RAW)
- continue;
- average.packages.counter[i] += p->counter[i];
+ if ((mp->format == FORMAT_RAW) && (topo.num_packages == 0))
+ average.packages.counter[i] = p->counter[i];
+ else
+ average.packages.counter[i] += p->counter[i];
}
return 0;
}
@@ -2578,6 +2973,7 @@ unsigned long long snapshot_sysfs_counter(char *path)
int get_mp(int cpu, struct msr_counter *mp, unsigned long long *counterp)
{
if (mp->msr_num != 0) {
+ assert(!no_msr);
if (get_msr(cpu, mp->msr_num, counterp))
return -1;
} else {
@@ -2599,7 +2995,7 @@ unsigned long long get_uncore_mhz(int package, int die)
{
char path[128];
- sprintf(path, "/sys/devices/system/cpu/intel_uncore_frequency/package_0%d_die_0%d/current_freq_khz", package,
+ sprintf(path, "/sys/devices/system/cpu/intel_uncore_frequency/package_%02d_die_%02d/current_freq_khz", package,
die);
return (snapshot_sysfs_counter(path) / 1000);
@@ -2627,6 +3023,9 @@ int get_epb(int cpu)
return epb;
msr_fallback:
+ if (no_msr)
+ return -1;
+
get_msr(cpu, MSR_IA32_ENERGY_PERF_BIAS, &msr);
return msr & 0xf;
@@ -2700,6 +3099,351 @@ int get_core_throt_cnt(int cpu, unsigned long long *cnt)
return 0;
}
+struct amperf_group_fd {
+ int aperf; /* Also the group descriptor */
+ int mperf;
+};
+
+static int read_perf_counter_info(const char *const path, const char *const parse_format, void *value_ptr)
+{
+ int fdmt;
+ int bytes_read;
+ char buf[64];
+ int ret = -1;
+
+ fdmt = open(path, O_RDONLY, 0);
+ if (fdmt == -1) {
+ if (debug)
+ fprintf(stderr, "Failed to parse perf counter info %s\n", path);
+ ret = -1;
+ goto cleanup_and_exit;
+ }
+
+ bytes_read = read(fdmt, buf, sizeof(buf) - 1);
+ if (bytes_read <= 0 || bytes_read >= (int)sizeof(buf)) {
+ if (debug)
+ fprintf(stderr, "Failed to parse perf counter info %s\n", path);
+ ret = -1;
+ goto cleanup_and_exit;
+ }
+
+ buf[bytes_read] = '\0';
+
+ if (sscanf(buf, parse_format, value_ptr) != 1) {
+ if (debug)
+ fprintf(stderr, "Failed to parse perf counter info %s\n", path);
+ ret = -1;
+ goto cleanup_and_exit;
+ }
+
+ ret = 0;
+
+cleanup_and_exit:
+ close(fdmt);
+ return ret;
+}
+
+static unsigned int read_perf_counter_info_n(const char *const path, const char *const parse_format)
+{
+ unsigned int v;
+ int status;
+
+ status = read_perf_counter_info(path, parse_format, &v);
+ if (status)
+ v = -1;
+
+ return v;
+}
+
+static unsigned int read_msr_type(void)
+{
+ const char *const path = "/sys/bus/event_source/devices/msr/type";
+ const char *const format = "%u";
+
+ return read_perf_counter_info_n(path, format);
+}
+
+static unsigned int read_aperf_config(void)
+{
+ const char *const path = "/sys/bus/event_source/devices/msr/events/aperf";
+ const char *const format = "event=%x";
+
+ return read_perf_counter_info_n(path, format);
+}
+
+static unsigned int read_mperf_config(void)
+{
+ const char *const path = "/sys/bus/event_source/devices/msr/events/mperf";
+ const char *const format = "event=%x";
+
+ return read_perf_counter_info_n(path, format);
+}
+
+static unsigned int read_perf_type(const char *subsys)
+{
+ const char *const path_format = "/sys/bus/event_source/devices/%s/type";
+ const char *const format = "%u";
+ char path[128];
+
+ snprintf(path, sizeof(path), path_format, subsys);
+
+ return read_perf_counter_info_n(path, format);
+}
+
+static unsigned int read_rapl_config(const char *subsys, const char *event_name)
+{
+ const char *const path_format = "/sys/bus/event_source/devices/%s/events/%s";
+ const char *const format = "event=%x";
+ char path[128];
+
+ snprintf(path, sizeof(path), path_format, subsys, event_name);
+
+ return read_perf_counter_info_n(path, format);
+}
+
+static unsigned int read_perf_rapl_unit(const char *subsys, const char *event_name)
+{
+ const char *const path_format = "/sys/bus/event_source/devices/%s/events/%s.unit";
+ const char *const format = "%s";
+ char path[128];
+ char unit_buffer[16];
+
+ snprintf(path, sizeof(path), path_format, subsys, event_name);
+
+ read_perf_counter_info(path, format, &unit_buffer);
+ if (strcmp("Joules", unit_buffer) == 0)
+ return RAPL_UNIT_JOULES;
+
+ return RAPL_UNIT_INVALID;
+}
+
+static double read_perf_rapl_scale(const char *subsys, const char *event_name)
+{
+ const char *const path_format = "/sys/bus/event_source/devices/%s/events/%s.scale";
+ const char *const format = "%lf";
+ char path[128];
+ double scale;
+
+ snprintf(path, sizeof(path), path_format, subsys, event_name);
+
+ if (read_perf_counter_info(path, format, &scale))
+ return 0.0;
+
+ return scale;
+}
+
+static struct amperf_group_fd open_amperf_fd(int cpu)
+{
+ const unsigned int msr_type = read_msr_type();
+ const unsigned int aperf_config = read_aperf_config();
+ const unsigned int mperf_config = read_mperf_config();
+ struct amperf_group_fd fds = {.aperf = -1, .mperf = -1 };
+
+ fds.aperf = open_perf_counter(cpu, msr_type, aperf_config, -1, PERF_FORMAT_GROUP);
+ fds.mperf = open_perf_counter(cpu, msr_type, mperf_config, fds.aperf, PERF_FORMAT_GROUP);
+
+ return fds;
+}
+
+static int get_amperf_fd(int cpu)
+{
+ assert(fd_amperf_percpu);
+
+ if (fd_amperf_percpu[cpu].aperf)
+ return fd_amperf_percpu[cpu].aperf;
+
+ fd_amperf_percpu[cpu] = open_amperf_fd(cpu);
+
+ return fd_amperf_percpu[cpu].aperf;
+}
+
+/* Read APERF, MPERF and TSC using the perf API. */
+static int read_aperf_mperf_tsc_perf(struct thread_data *t, int cpu)
+{
+ union {
+ struct {
+ unsigned long nr_entries;
+ unsigned long aperf;
+ unsigned long mperf;
+ };
+
+ unsigned long as_array[3];
+ } cnt;
+
+ const int fd_amperf = get_amperf_fd(cpu);
+
+ /*
+ * Read the TSC with rdtsc, because we want the absolute value and not
+ * the offset from the start of the counter.
+ */
+ t->tsc = rdtsc();
+
+ const int n = read(fd_amperf, &cnt.as_array[0], sizeof(cnt.as_array));
+
+ if (n != sizeof(cnt.as_array))
+ return -2;
+
+ t->aperf = cnt.aperf * aperf_mperf_multiplier;
+ t->mperf = cnt.mperf * aperf_mperf_multiplier;
+
+ return 0;
+}
+
+/* Read APERF, MPERF and TSC using the MSR driver and rdtsc instruction. */
+static int read_aperf_mperf_tsc_msr(struct thread_data *t, int cpu)
+{
+ unsigned long long tsc_before, tsc_between, tsc_after, aperf_time, mperf_time;
+ int aperf_mperf_retry_count = 0;
+
+ /*
+ * The TSC, APERF and MPERF must be read together for
+ * APERF/MPERF and MPERF/TSC to give accurate results.
+ *
+ * Unfortunately, APERF and MPERF are read by
+ * individual system call, so delays may occur
+ * between them. If the time to read them
+ * varies by a large amount, we re-read them.
+ */
+
+ /*
+ * This initial dummy APERF read has been seen to
+ * reduce jitter in the subsequent reads.
+ */
+
+ if (get_msr(cpu, MSR_IA32_APERF, &t->aperf))
+ return -3;
+
+retry:
+ t->tsc = rdtsc(); /* re-read close to APERF */
+
+ tsc_before = t->tsc;
+
+ if (get_msr(cpu, MSR_IA32_APERF, &t->aperf))
+ return -3;
+
+ tsc_between = rdtsc();
+
+ if (get_msr(cpu, MSR_IA32_MPERF, &t->mperf))
+ return -4;
+
+ tsc_after = rdtsc();
+
+ aperf_time = tsc_between - tsc_before;
+ mperf_time = tsc_after - tsc_between;
+
+ /*
+ * If the system call latency to read APERF and MPERF
+ * differ by more than 2x, then try again.
+ */
+ if ((aperf_time > (2 * mperf_time)) || (mperf_time > (2 * aperf_time))) {
+ aperf_mperf_retry_count++;
+ if (aperf_mperf_retry_count < 5)
+ goto retry;
+ else
+ warnx("cpu%d jitter %lld %lld", cpu, aperf_time, mperf_time);
+ }
+ aperf_mperf_retry_count = 0;
+
+ t->aperf = t->aperf * aperf_mperf_multiplier;
+ t->mperf = t->mperf * aperf_mperf_multiplier;
+
+ return 0;
+}
+
+size_t rapl_counter_info_count_perf(const struct rapl_counter_info_t *rci)
+{
+ size_t ret = 0;
+
+ for (int i = 0; i < NUM_RAPL_COUNTERS; ++i)
+ if (rci->source[i] == RAPL_SOURCE_PERF)
+ ++ret;
+
+ return ret;
+}
+
+void write_rapl_counter(struct rapl_counter *rc, struct rapl_counter_info_t *rci, unsigned int idx)
+{
+ rc->raw_value = rci->data[idx];
+ rc->unit = rci->unit[idx];
+ rc->scale = rci->scale[idx];
+}
+
+int get_rapl_counters(int cpu, int domain, struct core_data *c, struct pkg_data *p)
+{
+ unsigned long long perf_data[NUM_RAPL_COUNTERS + 1];
+ struct rapl_counter_info_t *rci = &rapl_counter_info_perdomain[domain];
+
+ if (debug)
+ fprintf(stderr, "%s: cpu%d domain%d\n", __func__, cpu, domain);
+
+ assert(rapl_counter_info_perdomain);
+
+ /*
+ * If we have any perf counters to read, read them all now, in bulk
+ */
+ if (rci->fd_perf != -1) {
+ size_t num_perf_counters = rapl_counter_info_count_perf(rci);
+ const ssize_t expected_read_size = (num_perf_counters + 1) * sizeof(unsigned long long);
+ const ssize_t actual_read_size = read(rci->fd_perf, &perf_data[0], sizeof(perf_data));
+
+ if (actual_read_size != expected_read_size)
+ err(-1, "%s: failed to read perf_data (%zu %zu)", __func__, expected_read_size,
+ actual_read_size);
+ }
+
+ for (unsigned int i = 0, pi = 1; i < NUM_RAPL_COUNTERS; ++i) {
+ switch (rci->source[i]) {
+ case RAPL_SOURCE_NONE:
+ break;
+
+ case RAPL_SOURCE_PERF:
+ assert(pi < ARRAY_SIZE(perf_data));
+ assert(rci->fd_perf != -1);
+
+ if (debug)
+ fprintf(stderr, "Reading rapl counter via perf at %u (%llu %e %lf)\n",
+ i, perf_data[pi], rci->scale[i], perf_data[pi] * rci->scale[i]);
+
+ rci->data[i] = perf_data[pi];
+
+ ++pi;
+ break;
+
+ case RAPL_SOURCE_MSR:
+ if (debug)
+ fprintf(stderr, "Reading rapl counter via msr at %u\n", i);
+
+ assert(!no_msr);
+ if (rci->flags[i] & RAPL_COUNTER_FLAG_USE_MSR_SUM) {
+ if (get_msr_sum(cpu, rci->msr[i], &rci->data[i]))
+ return -13 - i;
+ } else {
+ if (get_msr(cpu, rci->msr[i], &rci->data[i]))
+ return -13 - i;
+ }
+
+ rci->data[i] &= rci->msr_mask[i];
+ if (rci->msr_shift[i] >= 0)
+ rci->data[i] >>= abs(rci->msr_shift[i]);
+ else
+ rci->data[i] <<= abs(rci->msr_shift[i]);
+
+ break;
+ }
+ }
+
+ _Static_assert(NUM_RAPL_COUNTERS == 7);
+ write_rapl_counter(&p->energy_pkg, rci, RAPL_RCI_INDEX_ENERGY_PKG);
+ write_rapl_counter(&p->energy_cores, rci, RAPL_RCI_INDEX_ENERGY_CORES);
+ write_rapl_counter(&p->energy_dram, rci, RAPL_RCI_INDEX_DRAM);
+ write_rapl_counter(&p->energy_gfx, rci, RAPL_RCI_INDEX_GFX);
+ write_rapl_counter(&p->rapl_pkg_perf_status, rci, RAPL_RCI_INDEX_PKG_PERF_STATUS);
+ write_rapl_counter(&p->rapl_dram_perf_status, rci, RAPL_RCI_INDEX_DRAM_PERF_STATUS);
+ write_rapl_counter(&c->core_energy, rci, RAPL_RCI_INDEX_CORE_ENERGY);
+
+ return 0;
+}
+
/*
* get_counters(...)
* migrate to cpu
@@ -2709,12 +3453,12 @@ int get_counters(struct thread_data *t, struct core_data *c, struct pkg_data *p)
{
int cpu = t->cpu_id;
unsigned long long msr;
- int aperf_mperf_retry_count = 0;
struct msr_counter *mp;
int i;
+ int status;
if (cpu_migrate(cpu)) {
- fprintf(outf, "get_counters: Could not migrate to CPU %d\n", cpu);
+ fprintf(outf, "%s: Could not migrate to CPU %d\n", __func__, cpu);
return -1;
}
@@ -2722,63 +3466,26 @@ int get_counters(struct thread_data *t, struct core_data *c, struct pkg_data *p)
if (first_counter_read)
get_apic_id(t);
-retry:
+
t->tsc = rdtsc(); /* we are running on local CPU of interest */
if (DO_BIC(BIC_Avg_MHz) || DO_BIC(BIC_Busy) || DO_BIC(BIC_Bzy_MHz) || DO_BIC(BIC_IPC)
|| soft_c1_residency_display(BIC_Avg_MHz)) {
- unsigned long long tsc_before, tsc_between, tsc_after, aperf_time, mperf_time;
-
- /*
- * The TSC, APERF and MPERF must be read together for
- * APERF/MPERF and MPERF/TSC to give accurate results.
- *
- * Unfortunately, APERF and MPERF are read by
- * individual system call, so delays may occur
- * between them. If the time to read them
- * varies by a large amount, we re-read them.
- */
-
- /*
- * This initial dummy APERF read has been seen to
- * reduce jitter in the subsequent reads.
- */
-
- if (get_msr(cpu, MSR_IA32_APERF, &t->aperf))
- return -3;
-
- t->tsc = rdtsc(); /* re-read close to APERF */
-
- tsc_before = t->tsc;
+ int status = -1;
- if (get_msr(cpu, MSR_IA32_APERF, &t->aperf))
- return -3;
+ assert(!no_perf || !no_msr);
- tsc_between = rdtsc();
-
- if (get_msr(cpu, MSR_IA32_MPERF, &t->mperf))
- return -4;
-
- tsc_after = rdtsc();
-
- aperf_time = tsc_between - tsc_before;
- mperf_time = tsc_after - tsc_between;
-
- /*
- * If the system call latency to read APERF and MPERF
- * differ by more than 2x, then try again.
- */
- if ((aperf_time > (2 * mperf_time)) || (mperf_time > (2 * aperf_time))) {
- aperf_mperf_retry_count++;
- if (aperf_mperf_retry_count < 5)
- goto retry;
- else
- warnx("cpu%d jitter %lld %lld", cpu, aperf_time, mperf_time);
+ switch (amperf_source) {
+ case AMPERF_SOURCE_PERF:
+ status = read_aperf_mperf_tsc_perf(t, cpu);
+ break;
+ case AMPERF_SOURCE_MSR:
+ status = read_aperf_mperf_tsc_msr(t, cpu);
+ break;
}
- aperf_mperf_retry_count = 0;
- t->aperf = t->aperf * aperf_mperf_multiplier;
- t->mperf = t->mperf * aperf_mperf_multiplier;
+ if (status != 0)
+ return status;
}
if (DO_BIC(BIC_IPC))
@@ -2806,6 +3513,12 @@ retry:
if (!is_cpu_first_thread_in_core(t, c, p))
goto done;
+ if (platform->has_per_core_rapl) {
+ status = get_rapl_counters(cpu, c->core_id, c, p);
+ if (status != 0)
+ return status;
+ }
+
if (DO_BIC(BIC_CPU_c3) || soft_c1_residency_display(BIC_CPU_c3)) {
if (get_msr(cpu, MSR_CORE_C3_RESIDENCY, &c->c3))
return -6;
@@ -2846,12 +3559,6 @@ retry:
if (DO_BIC(BIC_CORE_THROT_CNT))
get_core_throt_cnt(cpu, &c->core_throt_cnt);
- if (platform->rapl_msrs & RAPL_AMD_F17H) {
- if (get_msr(cpu, MSR_CORE_ENERGY_STAT, &msr))
- return -14;
- c->core_energy = msr & 0xFFFFFFFF;
- }
-
for (i = 0, mp = sys.cp; mp; i++, mp = mp->next) {
if (get_mp(cpu, mp, &c->counter[i]))
return -10;
@@ -2911,59 +3618,39 @@ retry:
if (DO_BIC(BIC_SYS_LPI))
p->sys_lpi = cpuidle_cur_sys_lpi_us;
- if (platform->rapl_msrs & RAPL_PKG) {
- if (get_msr_sum(cpu, MSR_PKG_ENERGY_STATUS, &msr))
- return -13;
- p->energy_pkg = msr;
- }
- if (platform->rapl_msrs & RAPL_CORE_ENERGY_STATUS) {
- if (get_msr_sum(cpu, MSR_PP0_ENERGY_STATUS, &msr))
- return -14;
- p->energy_cores = msr;
- }
- if (platform->rapl_msrs & RAPL_DRAM) {
- if (get_msr_sum(cpu, MSR_DRAM_ENERGY_STATUS, &msr))
- return -15;
- p->energy_dram = msr;
- }
- if (platform->rapl_msrs & RAPL_GFX) {
- if (get_msr_sum(cpu, MSR_PP1_ENERGY_STATUS, &msr))
- return -16;
- p->energy_gfx = msr;
- }
- if (platform->rapl_msrs & RAPL_PKG_PERF_STATUS) {
- if (get_msr_sum(cpu, MSR_PKG_PERF_STATUS, &msr))
- return -16;
- p->rapl_pkg_perf_status = msr;
- }
- if (platform->rapl_msrs & RAPL_DRAM_PERF_STATUS) {
- if (get_msr_sum(cpu, MSR_DRAM_PERF_STATUS, &msr))
- return -16;
- p->rapl_dram_perf_status = msr;
- }
- if (platform->rapl_msrs & RAPL_AMD_F17H) {
- if (get_msr_sum(cpu, MSR_PKG_ENERGY_STAT, &msr))
- return -13;
- p->energy_pkg = msr;
+ if (!platform->has_per_core_rapl) {
+ status = get_rapl_counters(cpu, p->package_id, c, p);
+ if (status != 0)
+ return status;
}
+
if (DO_BIC(BIC_PkgTmp)) {
if (get_msr(cpu, MSR_IA32_PACKAGE_THERM_STATUS, &msr))
return -17;
p->pkg_temp_c = tj_max - ((msr >> 16) & 0x7F);
}
- if (DO_BIC(BIC_GFX_rc6))
- p->gfx_rc6_ms = gfx_cur_rc6_ms;
-
/* n.b. assume die0 uncore frequency applies to whole package */
if (DO_BIC(BIC_UNCORE_MHZ))
p->uncore_mhz = get_uncore_mhz(p->package_id, 0);
+ if (DO_BIC(BIC_GFX_rc6))
+ p->gfx_rc6_ms = gfx_info[GFX_rc6].val_ull;
+
if (DO_BIC(BIC_GFXMHz))
- p->gfx_mhz = gfx_cur_mhz;
+ p->gfx_mhz = gfx_info[GFX_MHz].val;
if (DO_BIC(BIC_GFXACTMHz))
- p->gfx_act_mhz = gfx_act_mhz;
+ p->gfx_act_mhz = gfx_info[GFX_ACTMHz].val;
+
+ if (DO_BIC(BIC_SAM_mc6))
+ p->sam_mc6_ms = gfx_info[SAM_mc6].val_ull;
+
+ if (DO_BIC(BIC_SAMMHz))
+ p->sam_mhz = gfx_info[SAM_MHz].val;
+
+ if (DO_BIC(BIC_SAMACTMHz))
+ p->sam_act_mhz = gfx_info[SAM_ACTMHz].val;
for (i = 0, mp = sys.pp; mp; i++, mp = mp->next) {
if (get_mp(cpu, mp, &p->counter[i]))
@@ -3053,7 +3740,7 @@ void probe_cst_limit(void)
unsigned long long msr;
int *pkg_cstate_limits;
- if (!platform->has_nhm_msrs)
+ if (!platform->has_nhm_msrs || no_msr)
return;
switch (platform->cst_limit) {
@@ -3097,7 +3784,7 @@ static void dump_platform_info(void)
unsigned long long msr;
unsigned int ratio;
- if (!platform->has_nhm_msrs)
+ if (!platform->has_nhm_msrs || no_msr)
return;
get_msr(base_cpu, MSR_PLATFORM_INFO, &msr);
@@ -3115,7 +3802,7 @@ static void dump_power_ctl(void)
{
unsigned long long msr;
- if (!platform->has_nhm_msrs)
+ if (!platform->has_nhm_msrs || no_msr)
return;
get_msr(base_cpu, MSR_IA32_POWER_CTL, &msr);
@@ -3321,7 +4008,7 @@ static void dump_cst_cfg(void)
{
unsigned long long msr;
- if (!platform->has_nhm_msrs)
+ if (!platform->has_nhm_msrs || no_msr)
return;
get_msr(base_cpu, MSR_PKG_CST_CONFIG_CONTROL, &msr);
@@ -3393,7 +4080,7 @@ void print_irtl(void)
{
unsigned long long msr;
- if (!platform->has_irtl_msrs)
+ if (!platform->has_irtl_msrs || no_msr)
return;
if (platform->supported_cstates & PC3) {
@@ -3443,12 +4130,64 @@ void free_fd_percpu(void)
{
int i;
+ if (!fd_percpu)
+ return;
+
for (i = 0; i < topo.max_cpu_num + 1; ++i) {
if (fd_percpu[i] != 0)
close(fd_percpu[i]);
}
free(fd_percpu);
+ fd_percpu = NULL;
+}
+
+void free_fd_amperf_percpu(void)
+{
+ int i;
+
+ if (!fd_amperf_percpu)
+ return;
+
+ for (i = 0; i < topo.max_cpu_num + 1; ++i) {
+ if (fd_amperf_percpu[i].mperf != 0)
+ close(fd_amperf_percpu[i].mperf);
+
+ if (fd_amperf_percpu[i].aperf != 0)
+ close(fd_amperf_percpu[i].aperf);
+ }
+
+ free(fd_amperf_percpu);
+ fd_amperf_percpu = NULL;
+}
+
+void free_fd_instr_count_percpu(void)
+{
+ if (!fd_instr_count_percpu)
+ return;
+
+ for (int i = 0; i < topo.max_cpu_num + 1; ++i) {
+ if (fd_instr_count_percpu[i] != 0)
+ close(fd_instr_count_percpu[i]);
+ }
+
+ free(fd_instr_count_percpu);
+ fd_instr_count_percpu = NULL;
+}
+
+void free_fd_rapl_percpu(void)
+{
+ if (!rapl_counter_info_perdomain)
+ return;
+
+ const int num_domains = platform->has_per_core_rapl ? topo.num_cores : topo.num_packages;
+
+ for (int domain_id = 0; domain_id < num_domains; ++domain_id) {
+ if (rapl_counter_info_perdomain[domain_id].fd_perf != -1)
+ close(rapl_counter_info_perdomain[domain_id].fd_perf);
+ }
+
+ free(rapl_counter_info_perdomain);
}
void free_all_buffers(void)
@@ -3492,6 +4231,9 @@ void free_all_buffers(void)
outp = NULL;
free_fd_percpu();
+ free_fd_instr_count_percpu();
+ free_fd_amperf_percpu();
+ free_fd_rapl_percpu();
free(irq_column_2_cpu);
free(irqs_per_cpu);
@@ -3825,11 +4567,17 @@ static void update_effective_set(bool startup)
err(1, "%s: cpu str malformat %s\n", PATH_EFFECTIVE_CPUS, cpu_effective_str);
}
+void linux_perf_init(void);
+void rapl_perf_init(void);
+
void re_initialize(void)
{
free_all_buffers();
setup_all_buffers(false);
- fprintf(outf, "turbostat: re-initialized with num_cpus %d, allowed_cpus %d\n", topo.num_cpus, topo.allowed_cpus);
+ linux_perf_init();
+ rapl_perf_init();
+ fprintf(outf, "turbostat: re-initialized with num_cpus %d, allowed_cpus %d\n", topo.num_cpus,
+ topo.allowed_cpus);
}
void set_max_cpu_num(void)
@@ -3940,85 +4688,43 @@ int snapshot_proc_interrupts(void)
}
/*
- * snapshot_gfx_rc6_ms()
+ * snapshot_graphics()
*
- * record snapshot of
- * /sys/class/drm/card0/power/rc6_residency_ms
+ * record snapshot of specified graphics sysfs knob
*
* return 1 if config change requires a restart, else return 0
*/
-int snapshot_gfx_rc6_ms(void)
+int snapshot_graphics(int idx)
{
FILE *fp;
int retval;
- fp = fopen_or_die("/sys/class/drm/card0/power/rc6_residency_ms", "r");
-
- retval = fscanf(fp, "%lld", &gfx_cur_rc6_ms);
- if (retval != 1)
- err(1, "GFX rc6");
-
- fclose(fp);
-
- return 0;
-}
-
-/*
- * snapshot_gfx_mhz()
- *
- * fall back to /sys/class/graphics/fb0/device/drm/card0/gt_cur_freq_mhz
- * when /sys/class/drm/card0/gt_cur_freq_mhz is not available.
- *
- * return 1 if config change requires a restart, else return 0
- */
-int snapshot_gfx_mhz(void)
-{
- static FILE *fp;
- int retval;
-
- if (fp == NULL) {
- fp = fopen("/sys/class/drm/card0/gt_cur_freq_mhz", "r");
- if (!fp)
- fp = fopen_or_die("/sys/class/graphics/fb0/device/drm/card0/gt_cur_freq_mhz", "r");
- } else {
- rewind(fp);
- fflush(fp);
- }
-
- retval = fscanf(fp, "%d", &gfx_cur_mhz);
- if (retval != 1)
- err(1, "GFX MHz");
-
- return 0;
-}
-
-/*
- * snapshot_gfx_cur_mhz()
- *
- * fall back to /sys/class/graphics/fb0/device/drm/card0/gt_act_freq_mhz
- * when /sys/class/drm/card0/gt_act_freq_mhz is not available.
- *
- * return 1 if config change requires a restart, else return 0
- */
-int snapshot_gfx_act_mhz(void)
-{
- static FILE *fp;
- int retval;
-
- if (fp == NULL) {
- fp = fopen("/sys/class/drm/card0/gt_act_freq_mhz", "r");
- if (!fp)
- fp = fopen_or_die("/sys/class/graphics/fb0/device/drm/card0/gt_act_freq_mhz", "r");
- } else {
- rewind(fp);
- fflush(fp);
+ switch (idx) {
+ case GFX_rc6:
+ case SAM_mc6:
+ fp = fopen_or_die(gfx_info[idx].path, "r");
+ retval = fscanf(fp, "%lld", &gfx_info[idx].val_ull);
+ if (retval != 1)
+ err(1, "rc6");
+ fclose(fp);
+ return 0;
+ case GFX_MHz:
+ case GFX_ACTMHz:
+ case SAM_MHz:
+ case SAM_ACTMHz:
+ if (gfx_info[idx].fp == NULL) {
+ gfx_info[idx].fp = fopen_or_die(gfx_info[idx].path, "r");
+ } else {
+ rewind(gfx_info[idx].fp);
+ fflush(gfx_info[idx].fp);
+ }
+ retval = fscanf(gfx_info[idx].fp, "%d", &gfx_info[idx].val);
+ if (retval != 1)
+ err(1, "MHz");
+ return 0;
+ default:
+ return -EINVAL;
}
-
- retval = fscanf(fp, "%d", &gfx_act_mhz);
- if (retval != 1)
- err(1, "GFX ACT MHz");
-
- return 0;
}
/*
@@ -4083,13 +4789,22 @@ int snapshot_proc_sysfs_files(void)
return 1;
if (DO_BIC(BIC_GFX_rc6))
- snapshot_gfx_rc6_ms();
+ snapshot_graphics(GFX_rc6);
if (DO_BIC(BIC_GFXMHz))
- snapshot_gfx_mhz();
+ snapshot_graphics(GFX_MHz);
if (DO_BIC(BIC_GFXACTMHz))
- snapshot_gfx_act_mhz();
+ snapshot_graphics(GFX_ACTMHz);
+
+ if (DO_BIC(BIC_SAM_mc6))
+ snapshot_graphics(SAM_mc6);
+
+ if (DO_BIC(BIC_SAMMHz))
+ snapshot_graphics(SAM_MHz);
+
+ if (DO_BIC(BIC_SAMACTMHz))
+ snapshot_graphics(SAM_ACTMHz);
if (DO_BIC(BIC_CPU_LPI))
snapshot_cpu_lpi_us();
@@ -4173,6 +4888,8 @@ int get_msr_sum(int cpu, off_t offset, unsigned long long *msr)
int ret, idx;
unsigned long long msr_cur, msr_last;
+ assert(!no_msr);
+
if (!per_cpu_msr_sum)
return 1;
@@ -4201,6 +4918,8 @@ static int update_msr_sum(struct thread_data *t, struct core_data *c, struct pkg
UNUSED(c);
UNUSED(p);
+ assert(!no_msr);
+
for (i = IDX_PKG_ENERGY; i < IDX_COUNT; i++) {
unsigned long long msr_cur, msr_last;
off_t offset;
@@ -4280,7 +4999,8 @@ release_msr:
/*
* set_my_sched_priority(pri)
- * return previous
+ * return previous priority on success
+ * return value < -20 on failure
*/
int set_my_sched_priority(int priority)
{
@@ -4290,16 +5010,16 @@ int set_my_sched_priority(int priority)
errno = 0;
original_priority = getpriority(PRIO_PROCESS, 0);
if (errno && (original_priority == -1))
- err(errno, "getpriority");
+ return -21;
retval = setpriority(PRIO_PROCESS, 0, priority);
if (retval)
- errx(retval, "capget(CAP_SYS_NICE) failed,try \"# setcap cap_sys_nice=ep %s\"", progname);
+ return -21;
errno = 0;
retval = getpriority(PRIO_PROCESS, 0);
if (retval != priority)
- err(retval, "getpriority(%d) != setpriority(%d)", retval, priority);
+ return -21;
return original_priority;
}
@@ -4314,6 +5034,9 @@ void turbostat_loop()
/*
* elevate own priority for interval mode
+ *
+ * ignore on error - we probably don't have permission to set it, but
+ * it's not a big deal
*/
set_my_sched_priority(-20);
@@ -4399,10 +5122,13 @@ void check_dev_msr()
struct stat sb;
char pathname[32];
+ if (no_msr)
+ return;
+
sprintf(pathname, "/dev/cpu/%d/msr", base_cpu);
if (stat(pathname, &sb))
if (system("/sbin/modprobe msr > /dev/null 2>&1"))
- err(-5, "no /dev/cpu/0/msr, Try \"# modprobe msr\" ");
+ no_msr = 1;
}
/*
@@ -4414,47 +5140,51 @@ int check_for_cap_sys_rawio(void)
{
cap_t caps;
cap_flag_value_t cap_flag_value;
+ int ret = 0;
caps = cap_get_proc();
if (caps == NULL)
- err(-6, "cap_get_proc\n");
+ return 1;
- if (cap_get_flag(caps, CAP_SYS_RAWIO, CAP_EFFECTIVE, &cap_flag_value))
- err(-6, "cap_get\n");
+ if (cap_get_flag(caps, CAP_SYS_RAWIO, CAP_EFFECTIVE, &cap_flag_value)) {
+ ret = 1;
+ goto free_and_exit;
+ }
if (cap_flag_value != CAP_SET) {
- warnx("capget(CAP_SYS_RAWIO) failed," " try \"# setcap cap_sys_rawio=ep %s\"", progname);
- return 1;
+ ret = 1;
+ goto free_and_exit;
}
+free_and_exit:
if (cap_free(caps) == -1)
err(-6, "cap_free\n");
- return 0;
+ return ret;
}
-void check_permissions(void)
+void check_msr_permission(void)
{
- int do_exit = 0;
+ int failed = 0;
char pathname[32];
+ if (no_msr)
+ return;
+
/* check for CAP_SYS_RAWIO */
- do_exit += check_for_cap_sys_rawio();
+ failed += check_for_cap_sys_rawio();
/* test file permissions */
sprintf(pathname, "/dev/cpu/%d/msr", base_cpu);
if (euidaccess(pathname, R_OK)) {
- do_exit++;
- warn("/dev/cpu/0/msr open failed, try chown or chmod +r /dev/cpu/*/msr");
+ failed++;
}
- /* if all else fails, thell them to be root */
- if (do_exit)
- if (getuid() != 0)
- warnx("... or simply run as root");
-
- if (do_exit)
- exit(-6);
+ if (failed) {
+ warnx("Failed to access %s. Some of the counters may not be available\n"
+ "\tRun as root to enable them or use %s to disable the access explicitly", pathname, "--no-msr");
+ no_msr = 1;
+ }
}
void probe_bclk(void)
@@ -4462,7 +5192,7 @@ void probe_bclk(void)
unsigned long long msr;
unsigned int base_ratio;
- if (!platform->has_nhm_msrs)
+ if (!platform->has_nhm_msrs || no_msr)
return;
if (platform->bclk_freq == BCLK_100MHZ)
@@ -4502,7 +5232,7 @@ static void dump_turbo_ratio_info(void)
if (!has_turbo)
return;
- if (!platform->has_nhm_msrs)
+ if (!platform->has_nhm_msrs || no_msr)
return;
if (platform->trl_msrs & TRL_LIMIT2)
@@ -4567,20 +5297,15 @@ static void dump_sysfs_file(char *path)
static void probe_intel_uncore_frequency(void)
{
int i, j;
- char path[128];
+ char path[256];
if (!genuine_intel)
return;
- if (access("/sys/devices/system/cpu/intel_uncore_frequency/package_00_die_00", R_OK))
- return;
-
- /* Cluster level sysfs not supported yet. */
- if (!access("/sys/devices/system/cpu/intel_uncore_frequency/uncore00", R_OK))
- return;
+ if (access("/sys/devices/system/cpu/intel_uncore_frequency/package_00_die_00/current_freq_khz", R_OK))
+ goto probe_cluster;
- if (!access("/sys/devices/system/cpu/intel_uncore_frequency/package_00_die_00/current_freq_khz", R_OK))
- BIC_PRESENT(BIC_UNCORE_MHZ);
+ BIC_PRESENT(BIC_UNCORE_MHZ);
if (quiet)
return;
@@ -4588,40 +5313,178 @@ static void probe_intel_uncore_frequency(void)
for (i = 0; i < topo.num_packages; ++i) {
for (j = 0; j < topo.num_die; ++j) {
int k, l;
+ char path_base[128];
+
+ sprintf(path_base, "/sys/devices/system/cpu/intel_uncore_frequency/package_%02d_die_%02d", i,
+ j);
- sprintf(path, "/sys/devices/system/cpu/intel_uncore_frequency/package_0%d_die_0%d/min_freq_khz",
- i, j);
+ sprintf(path, "%s/min_freq_khz", path_base);
k = read_sysfs_int(path);
- sprintf(path, "/sys/devices/system/cpu/intel_uncore_frequency/package_0%d_die_0%d/max_freq_khz",
- i, j);
+ sprintf(path, "%s/max_freq_khz", path_base);
l = read_sysfs_int(path);
- fprintf(outf, "Uncore Frequency pkg%d die%d: %d - %d MHz ", i, j, k / 1000, l / 1000);
+ fprintf(outf, "Uncore Frequency package%d die%d: %d - %d MHz ", i, j, k / 1000, l / 1000);
- sprintf(path,
- "/sys/devices/system/cpu/intel_uncore_frequency/package_0%d_die_0%d/initial_min_freq_khz",
- i, j);
+ sprintf(path, "%s/initial_min_freq_khz", path_base);
k = read_sysfs_int(path);
- sprintf(path,
- "/sys/devices/system/cpu/intel_uncore_frequency/package_0%d_die_0%d/initial_max_freq_khz",
- i, j);
+ sprintf(path, "%s/initial_max_freq_khz", path_base);
l = read_sysfs_int(path);
- fprintf(outf, "(%d - %d MHz)\n", k / 1000, l / 1000);
+ fprintf(outf, "(%d - %d MHz)", k / 1000, l / 1000);
+
+ sprintf(path, "%s/current_freq_khz", path_base);
+ k = read_sysfs_int(path);
+ fprintf(outf, " %d MHz\n", k / 1000);
}
}
+ return;
+
+probe_cluster:
+ if (access("/sys/devices/system/cpu/intel_uncore_frequency/uncore00/current_freq_khz", R_OK))
+ return;
+
+ if (quiet)
+ return;
+
+ for (i = 0;; ++i) {
+ int k, l;
+ char path_base[128];
+ int package_id, domain_id, cluster_id;
+
+ sprintf(path_base, "/sys/devices/system/cpu/intel_uncore_frequency/uncore%02d", i);
+
+ if (access(path_base, R_OK))
+ break;
+
+ sprintf(path, "%s/package_id", path_base);
+ package_id = read_sysfs_int(path);
+
+ sprintf(path, "%s/domain_id", path_base);
+ domain_id = read_sysfs_int(path);
+
+ sprintf(path, "%s/fabric_cluster_id", path_base);
+ cluster_id = read_sysfs_int(path);
+
+ sprintf(path, "%s/min_freq_khz", path_base);
+ k = read_sysfs_int(path);
+ sprintf(path, "%s/max_freq_khz", path_base);
+ l = read_sysfs_int(path);
+ fprintf(outf, "Uncore Frequency package%d domain%d cluster%d: %d - %d MHz ", package_id, domain_id,
+ cluster_id, k / 1000, l / 1000);
+
+ sprintf(path, "%s/initial_min_freq_khz", path_base);
+ k = read_sysfs_int(path);
+ sprintf(path, "%s/initial_max_freq_khz", path_base);
+ l = read_sysfs_int(path);
+ fprintf(outf, "(%d - %d MHz)", k / 1000, l / 1000);
+
+ sprintf(path, "%s/current_freq_khz", path_base);
+ k = read_sysfs_int(path);
+ fprintf(outf, " %d MHz\n", k / 1000);
+ }
}
static void probe_graphics(void)
{
+ /* Xe graphics sysfs knobs */
+ if (!access("/sys/class/drm/card0/device/tile0/gt0/gtidle/idle_residency_ms", R_OK)) {
+ FILE *fp;
+ char buf[8];
+ bool gt0_is_gt;
+ int idx;
+
+ fp = fopen("/sys/class/drm/card0/device/tile0/gt0/gtidle/name", "r");
+ if (!fp)
+ goto next;
+
+ if (!fread(buf, sizeof(char), 7, fp)) {
+ fclose(fp);
+ goto next;
+ }
+ fclose(fp);
+
+ if (!strncmp(buf, "gt0-rc", strlen("gt0-rc")))
+ gt0_is_gt = true;
+ else if (!strncmp(buf, "gt0-mc", strlen("gt0-mc")))
+ gt0_is_gt = false;
+ else
+ goto next;
+
+ idx = gt0_is_gt ? GFX_rc6 : SAM_mc6;
+ gfx_info[idx].path = "/sys/class/drm/card0/device/tile0/gt0/gtidle/idle_residency_ms";
+
+ idx = gt0_is_gt ? GFX_MHz : SAM_MHz;
+ if (!access("/sys/class/drm/card0/device/tile0/gt0/freq0/cur_freq", R_OK))
+ gfx_info[idx].path = "/sys/class/drm/card0/device/tile0/gt0/freq0/cur_freq";
+
+ idx = gt0_is_gt ? GFX_ACTMHz : SAM_ACTMHz;
+ if (!access("/sys/class/drm/card0/device/tile0/gt0/freq0/act_freq", R_OK))
+ gfx_info[idx].path = "/sys/class/drm/card0/device/tile0/gt0/freq0/act_freq";
+
+ idx = gt0_is_gt ? SAM_mc6 : GFX_rc6;
+ if (!access("/sys/class/drm/card0/device/tile0/gt1/gtidle/idle_residency_ms", R_OK))
+ gfx_info[idx].path = "/sys/class/drm/card0/device/tile0/gt1/gtidle/idle_residency_ms";
+
+ idx = gt0_is_gt ? SAM_MHz : GFX_MHz;
+ if (!access("/sys/class/drm/card0/device/tile0/gt1/freq0/cur_freq", R_OK))
+ gfx_info[idx].path = "/sys/class/drm/card0/device/tile0/gt1/freq0/cur_freq";
+
+ idx = gt0_is_gt ? SAM_ACTMHz : GFX_ACTMHz;
+ if (!access("/sys/class/drm/card0/device/tile0/gt1/freq0/act_freq", R_OK))
+ gfx_info[idx].path = "/sys/class/drm/card0/device/tile0/gt1/freq0/act_freq";
+
+ goto end;
+ }
+
+next:
+ /* New i915 graphics sysfs knobs */
+ if (!access("/sys/class/drm/card0/gt/gt0/rc6_residency_ms", R_OK)) {
+ gfx_info[GFX_rc6].path = "/sys/class/drm/card0/gt/gt0/rc6_residency_ms";
+
+ if (!access("/sys/class/drm/card0/gt/gt0/rps_cur_freq_mhz", R_OK))
+ gfx_info[GFX_MHz].path = "/sys/class/drm/card0/gt/gt0/rps_cur_freq_mhz";
+
+ if (!access("/sys/class/drm/card0/gt/gt0/rps_act_freq_mhz", R_OK))
+ gfx_info[GFX_ACTMHz].path = "/sys/class/drm/card0/gt/gt0/rps_act_freq_mhz";
+
+ if (!access("/sys/class/drm/card0/gt/gt1/rc6_residency_ms", R_OK))
+ gfx_info[SAM_mc6].path = "/sys/class/drm/card0/gt/gt1/rc6_residency_ms";
+
+ if (!access("/sys/class/drm/card0/gt/gt1/rps_cur_freq_mhz", R_OK))
+ gfx_info[SAM_MHz].path = "/sys/class/drm/card0/gt/gt1/rps_cur_freq_mhz";
+
+ if (!access("/sys/class/drm/card0/gt/gt1/rps_act_freq_mhz", R_OK))
+ gfx_info[SAM_ACTMHz].path = "/sys/class/drm/card0/gt/gt1/rps_act_freq_mhz";
+
+ goto end;
+ }
+
+ /* Fall back to traditional i915 graphics sysfs knobs */
if (!access("/sys/class/drm/card0/power/rc6_residency_ms", R_OK))
- BIC_PRESENT(BIC_GFX_rc6);
+ gfx_info[GFX_rc6].path = "/sys/class/drm/card0/power/rc6_residency_ms";
+
+ if (!access("/sys/class/drm/card0/gt_cur_freq_mhz", R_OK))
+ gfx_info[GFX_MHz].path = "/sys/class/drm/card0/gt_cur_freq_mhz";
+ else if (!access("/sys/class/graphics/fb0/device/drm/card0/gt_cur_freq_mhz", R_OK))
+ gfx_info[GFX_MHz].path = "/sys/class/graphics/fb0/device/drm/card0/gt_cur_freq_mhz";
- if (!access("/sys/class/drm/card0/gt_cur_freq_mhz", R_OK) ||
- !access("/sys/class/graphics/fb0/device/drm/card0/gt_cur_freq_mhz", R_OK))
- BIC_PRESENT(BIC_GFXMHz);
- if (!access("/sys/class/drm/card0/gt_act_freq_mhz", R_OK) ||
- !access("/sys/class/graphics/fb0/device/drm/card0/gt_act_freq_mhz", R_OK))
+ if (!access("/sys/class/drm/card0/gt_act_freq_mhz", R_OK))
+ gfx_info[GFX_ACTMHz].path = "/sys/class/drm/card0/gt_act_freq_mhz";
+ else if (!access("/sys/class/graphics/fb0/device/drm/card0/gt_act_freq_mhz", R_OK))
+ gfx_info[GFX_ACTMHz].path = "/sys/class/graphics/fb0/device/drm/card0/gt_act_freq_mhz";
+
+end:
+ if (gfx_info[GFX_rc6].path)
+ BIC_PRESENT(BIC_GFX_rc6);
+ if (gfx_info[GFX_MHz].path)
+ BIC_PRESENT(BIC_GFXMHz);
+ if (gfx_info[GFX_ACTMHz].path)
BIC_PRESENT(BIC_GFXACTMHz);
+ if (gfx_info[SAM_mc6].path)
+ BIC_PRESENT(BIC_SAM_mc6);
+ if (gfx_info[SAM_MHz].path)
+ BIC_PRESENT(BIC_SAMMHz);
+ if (gfx_info[SAM_ACTMHz].path)
+ BIC_PRESENT(BIC_SAMACTMHz);
}
static void dump_sysfs_cstate_config(void)
@@ -4783,6 +5646,9 @@ int print_hwp(struct thread_data *t, struct core_data *c, struct pkg_data *p)
UNUSED(c);
UNUSED(p);
+ if (no_msr)
+ return 0;
+
if (!has_hwp)
return 0;
@@ -4869,6 +5735,9 @@ int print_perf_limit(struct thread_data *t, struct core_data *c, struct pkg_data
UNUSED(c);
UNUSED(p);
+ if (no_msr)
+ return 0;
+
cpu = t->cpu_id;
/* per-package */
@@ -4983,31 +5852,18 @@ void rapl_probe_intel(void)
unsigned long long msr;
unsigned int time_unit;
double tdp;
+ const unsigned long long bic_watt_bits = BIC_PkgWatt | BIC_CorWatt | BIC_RAMWatt | BIC_GFXWatt;
+ const unsigned long long bic_joules_bits = BIC_Pkg_J | BIC_Cor_J | BIC_RAM_J | BIC_GFX_J;
- if (rapl_joules) {
- if (platform->rapl_msrs & RAPL_PKG_ENERGY_STATUS)
- BIC_PRESENT(BIC_Pkg_J);
- if (platform->rapl_msrs & RAPL_CORE_ENERGY_STATUS)
- BIC_PRESENT(BIC_Cor_J);
- if (platform->rapl_msrs & RAPL_DRAM_ENERGY_STATUS)
- BIC_PRESENT(BIC_RAM_J);
- if (platform->rapl_msrs & RAPL_GFX_ENERGY_STATUS)
- BIC_PRESENT(BIC_GFX_J);
- } else {
- if (platform->rapl_msrs & RAPL_PKG_ENERGY_STATUS)
- BIC_PRESENT(BIC_PkgWatt);
- if (platform->rapl_msrs & RAPL_CORE_ENERGY_STATUS)
- BIC_PRESENT(BIC_CorWatt);
- if (platform->rapl_msrs & RAPL_DRAM_ENERGY_STATUS)
- BIC_PRESENT(BIC_RAMWatt);
- if (platform->rapl_msrs & RAPL_GFX_ENERGY_STATUS)
- BIC_PRESENT(BIC_GFXWatt);
- }
+ if (rapl_joules)
+ bic_enabled &= ~bic_watt_bits;
+ else
+ bic_enabled &= ~bic_joules_bits;
- if (platform->rapl_msrs & RAPL_PKG_PERF_STATUS)
- BIC_PRESENT(BIC_PKG__);
- if (platform->rapl_msrs & RAPL_DRAM_PERF_STATUS)
- BIC_PRESENT(BIC_RAM__);
+ if (!(platform->rapl_msrs & RAPL_PKG_PERF_STATUS))
+ bic_enabled &= ~BIC_PKG__;
+ if (!(platform->rapl_msrs & RAPL_DRAM_PERF_STATUS))
+ bic_enabled &= ~BIC_RAM__;
/* units on package 0, verify later other packages match */
if (get_msr(base_cpu, MSR_RAPL_POWER_UNIT, &msr))
@@ -5041,14 +5897,13 @@ void rapl_probe_amd(void)
{
unsigned long long msr;
double tdp;
+ const unsigned long long bic_watt_bits = BIC_PkgWatt | BIC_CorWatt;
+ const unsigned long long bic_joules_bits = BIC_Pkg_J | BIC_Cor_J;
- if (rapl_joules) {
- BIC_PRESENT(BIC_Pkg_J);
- BIC_PRESENT(BIC_Cor_J);
- } else {
- BIC_PRESENT(BIC_PkgWatt);
- BIC_PRESENT(BIC_CorWatt);
- }
+ if (rapl_joules)
+ bic_enabled &= ~bic_watt_bits;
+ else
+ bic_enabled &= ~bic_joules_bits;
if (get_msr(base_cpu, MSR_RAPL_PWR_UNIT, &msr))
return;
@@ -5202,7 +6057,7 @@ int print_rapl(struct thread_data *t, struct core_data *c, struct pkg_data *p)
*/
void probe_rapl(void)
{
- if (!platform->rapl_msrs)
+ if (!platform->rapl_msrs || no_msr)
return;
if (genuine_intel)
@@ -5258,7 +6113,7 @@ int set_temperature_target(struct thread_data *t, struct core_data *c, struct pk
}
/* Temperature Target MSR is Nehalem and newer only */
- if (!platform->has_nhm_msrs)
+ if (!platform->has_nhm_msrs || no_msr)
goto guess;
if (get_msr(base_cpu, MSR_IA32_TEMPERATURE_TARGET, &msr))
@@ -5305,6 +6160,9 @@ int print_thermal(struct thread_data *t, struct core_data *c, struct pkg_data *p
UNUSED(c);
UNUSED(p);
+ if (no_msr)
+ return 0;
+
if (!(do_dts || do_ptm))
return 0;
@@ -5402,6 +6260,9 @@ void decode_feature_control_msr(void)
{
unsigned long long msr;
+ if (no_msr)
+ return;
+
if (!get_msr(base_cpu, MSR_IA32_FEAT_CTL, &msr))
fprintf(outf, "cpu%d: MSR_IA32_FEATURE_CONTROL: 0x%08llx (%sLocked %s)\n",
base_cpu, msr, msr & FEAT_CTL_LOCKED ? "" : "UN-", msr & (1 << 18) ? "SGX" : "");
@@ -5411,6 +6272,9 @@ void decode_misc_enable_msr(void)
{
unsigned long long msr;
+ if (no_msr)
+ return;
+
if (!genuine_intel)
return;
@@ -5428,6 +6292,9 @@ void decode_misc_feature_control(void)
{
unsigned long long msr;
+ if (no_msr)
+ return;
+
if (!platform->has_msr_misc_feature_control)
return;
@@ -5449,6 +6316,9 @@ void decode_misc_pwr_mgmt_msr(void)
{
unsigned long long msr;
+ if (no_msr)
+ return;
+
if (!platform->has_msr_misc_pwr_mgmt)
return;
@@ -5468,6 +6338,9 @@ void decode_c6_demotion_policy_msr(void)
{
unsigned long long msr;
+ if (no_msr)
+ return;
+
if (!platform->has_msr_c6_demotion_policy_config)
return;
@@ -5489,7 +6362,8 @@ void print_dev_latency(void)
fd = open(path, O_RDONLY);
if (fd < 0) {
- warnx("capget(CAP_SYS_ADMIN) failed, try \"# setcap cap_sys_admin=ep %s\"", progname);
+ if (debug)
+ warnx("Read %s failed", path);
return;
}
@@ -5504,23 +6378,260 @@ void print_dev_latency(void)
close(fd);
}
+static int has_instr_count_access(void)
+{
+ int fd;
+ int has_access;
+
+ if (no_perf)
+ return 0;
+
+ fd = open_perf_counter(base_cpu, PERF_TYPE_HARDWARE, PERF_COUNT_HW_INSTRUCTIONS, -1, 0);
+ has_access = fd != -1;
+
+ if (fd != -1)
+ close(fd);
+
+ if (!has_access)
+ warnx("Failed to access %s. Some of the counters may not be available\n"
+ "\tRun as root to enable them or use %s to disable the access explicitly",
+ "instructions retired perf counter", "--no-perf");
+
+ return has_access;
+}
+
+bool is_aperf_access_required(void)
+{
+ return BIC_IS_ENABLED(BIC_Avg_MHz)
+ || BIC_IS_ENABLED(BIC_Busy)
+ || BIC_IS_ENABLED(BIC_Bzy_MHz)
+ || BIC_IS_ENABLED(BIC_IPC);
+}
+
+int add_rapl_perf_counter_(int cpu, struct rapl_counter_info_t *rci, const struct rapl_counter_arch_info *cai,
+ double *scale_, enum rapl_unit *unit_)
+{
+ if (no_perf)
+ return -1;
+
+ const double scale = read_perf_rapl_scale(cai->perf_subsys, cai->perf_name);
+
+ if (scale == 0.0)
+ return -1;
+
+ const enum rapl_unit unit = read_perf_rapl_unit(cai->perf_subsys, cai->perf_name);
+
+ if (unit == RAPL_UNIT_INVALID)
+ return -1;
+
+ const unsigned int rapl_type = read_perf_type(cai->perf_subsys);
+ const unsigned int rapl_energy_pkg_config = read_rapl_config(cai->perf_subsys, cai->perf_name);
+
+ const int fd_counter =
+ open_perf_counter(cpu, rapl_type, rapl_energy_pkg_config, rci->fd_perf, PERF_FORMAT_GROUP);
+ if (fd_counter == -1)
+ return -1;
+
+ /* If it's the first counter opened, make it a group descriptor */
+ if (rci->fd_perf == -1)
+ rci->fd_perf = fd_counter;
+
+ *scale_ = scale;
+ *unit_ = unit;
+ return fd_counter;
+}
+
+int add_rapl_perf_counter(int cpu, struct rapl_counter_info_t *rci, const struct rapl_counter_arch_info *cai,
+ double *scale, enum rapl_unit *unit)
+{
+ int ret = add_rapl_perf_counter_(cpu, rci, cai, scale, unit);
+
+ if (debug)
+ fprintf(stderr, "%s: %d (cpu: %d)\n", __func__, ret, cpu);
+
+ return ret;
+}
+
/*
* Linux-perf manages the HW instructions-retired counter
* by enabling when requested, and hiding rollover
*/
void linux_perf_init(void)
{
- if (!BIC_IS_ENABLED(BIC_IPC))
- return;
-
if (access("/proc/sys/kernel/perf_event_paranoid", F_OK))
return;
- fd_instr_count_percpu = calloc(topo.max_cpu_num + 1, sizeof(int));
- if (fd_instr_count_percpu == NULL)
- err(-1, "calloc fd_instr_count_percpu");
+ if (BIC_IS_ENABLED(BIC_IPC) && has_aperf) {
+ fd_instr_count_percpu = calloc(topo.max_cpu_num + 1, sizeof(int));
+ if (fd_instr_count_percpu == NULL)
+ err(-1, "calloc fd_instr_count_percpu");
+ }
+
+ const bool aperf_required = is_aperf_access_required();
+
+ if (aperf_required && has_aperf && amperf_source == AMPERF_SOURCE_PERF) {
+ fd_amperf_percpu = calloc(topo.max_cpu_num + 1, sizeof(*fd_amperf_percpu));
+ if (fd_amperf_percpu == NULL)
+ err(-1, "calloc fd_amperf_percpu");
+ }
+}
+
+void rapl_perf_init(void)
+{
+ const int num_domains = platform->has_per_core_rapl ? topo.num_cores : topo.num_packages;
+ bool *domain_visited = calloc(num_domains, sizeof(bool));
+
+ rapl_counter_info_perdomain = calloc(num_domains, sizeof(*rapl_counter_info_perdomain));
+ if (rapl_counter_info_perdomain == NULL)
+ err(-1, "calloc rapl_counter_info_percpu");
+
+ /*
+ * Initialize rapl_counter_info_percpu
+ */
+ for (int domain_id = 0; domain_id < num_domains; ++domain_id) {
+ struct rapl_counter_info_t *rci = &rapl_counter_info_perdomain[domain_id];
+
+ rci->fd_perf = -1;
+ for (size_t i = 0; i < NUM_RAPL_COUNTERS; ++i) {
+ rci->data[i] = 0;
+ rci->source[i] = RAPL_SOURCE_NONE;
+ }
+ }
- BIC_PRESENT(BIC_IPC);
+ /*
+ * Open/probe the counters
+ * If can't get it via perf, fallback to MSR
+ */
+ for (size_t i = 0; i < ARRAY_SIZE(rapl_counter_arch_infos); ++i) {
+
+ const struct rapl_counter_arch_info *const cai = &rapl_counter_arch_infos[i];
+ bool has_counter = 0;
+ double scale;
+ enum rapl_unit unit;
+ int next_domain;
+
+ memset(domain_visited, 0, num_domains * sizeof(*domain_visited));
+
+ for (int cpu = 0; cpu < topo.max_cpu_num + 1; ++cpu) {
+
+ if (cpu_is_not_allowed(cpu))
+ continue;
+
+ /* Skip already seen and handled RAPL domains */
+ next_domain =
+ platform->has_per_core_rapl ? cpus[cpu].physical_core_id : cpus[cpu].physical_package_id;
+
+ if (domain_visited[next_domain])
+ continue;
+
+ domain_visited[next_domain] = 1;
+
+ struct rapl_counter_info_t *rci = &rapl_counter_info_perdomain[next_domain];
+
+ /* Check if the counter is enabled and accessible */
+ if (BIC_IS_ENABLED(cai->bic) && (platform->rapl_msrs & cai->feature_mask)) {
+
+ /* Use perf API for this counter */
+ if (!no_perf && cai->perf_name
+ && add_rapl_perf_counter(cpu, rci, cai, &scale, &unit) != -1) {
+ rci->source[cai->rci_index] = RAPL_SOURCE_PERF;
+ rci->scale[cai->rci_index] = scale * cai->compat_scale;
+ rci->unit[cai->rci_index] = unit;
+ rci->flags[cai->rci_index] = cai->flags;
+
+ /* Use MSR for this counter */
+ } else if (!no_msr && cai->msr && probe_msr(cpu, cai->msr) == 0) {
+ rci->source[cai->rci_index] = RAPL_SOURCE_MSR;
+ rci->msr[cai->rci_index] = cai->msr;
+ rci->msr_mask[cai->rci_index] = cai->msr_mask;
+ rci->msr_shift[cai->rci_index] = cai->msr_shift;
+ rci->unit[cai->rci_index] = RAPL_UNIT_JOULES;
+ rci->scale[cai->rci_index] = *cai->platform_rapl_msr_scale * cai->compat_scale;
+ rci->flags[cai->rci_index] = cai->flags;
+ }
+ }
+
+ if (rci->source[cai->rci_index] != RAPL_SOURCE_NONE)
+ has_counter = 1;
+ }
+
+ /* If any CPU has access to the counter, make it present */
+ if (has_counter)
+ BIC_PRESENT(cai->bic);
+ }
+
+ free(domain_visited);
+}
+
+static int has_amperf_access_via_msr(void)
+{
+ if (no_msr)
+ return 0;
+
+ if (probe_msr(base_cpu, MSR_IA32_APERF))
+ return 0;
+
+ if (probe_msr(base_cpu, MSR_IA32_MPERF))
+ return 0;
+
+ return 1;
+}
+
+static int has_amperf_access_via_perf(void)
+{
+ struct amperf_group_fd fds;
+
+ /*
+ * Cache the last result, so we don't warn the user multiple times
+ *
+ * Negative means cached, no access
+ * Zero means not cached
+ * Positive means cached, has access
+ */
+ static int has_access_cached;
+
+ if (no_perf)
+ return 0;
+
+ if (has_access_cached != 0)
+ return has_access_cached > 0;
+
+ fds = open_amperf_fd(base_cpu);
+ has_access_cached = (fds.aperf != -1) && (fds.mperf != -1);
+
+ if (fds.aperf == -1)
+ warnx("Failed to access %s. Some of the counters may not be available\n"
+ "\tRun as root to enable them or use %s to disable the access explicitly",
+ "APERF perf counter", "--no-perf");
+ else
+ close(fds.aperf);
+
+ if (fds.mperf == -1)
+ warnx("Failed to access %s. Some of the counters may not be available\n"
+ "\tRun as root to enable them or use %s to disable the access explicitly",
+ "MPERF perf counter", "--no-perf");
+ else
+ close(fds.mperf);
+
+ if (has_access_cached == 0)
+ has_access_cached = -1;
+
+ return has_access_cached > 0;
+}
+
+/* Check if we can access APERF and MPERF */
+static int has_amperf_access(void)
+{
+ if (!is_aperf_access_required())
+ return 0;
+
+ if (!no_msr && has_amperf_access_via_msr())
+ return 1;
+
+ if (!no_perf && has_amperf_access_via_perf())
+ return 1;
+
+ return 0;
}
void probe_cstates(void)
@@ -5563,7 +6674,7 @@ void probe_cstates(void)
if (platform->has_msr_module_c6_res_ms)
BIC_PRESENT(BIC_Mod_c6);
- if (platform->has_ext_cst_msrs) {
+ if (platform->has_ext_cst_msrs && !no_msr) {
BIC_PRESENT(BIC_Totl_c0);
BIC_PRESENT(BIC_Any_c0);
BIC_PRESENT(BIC_GFX_c0);
@@ -5623,6 +6734,7 @@ void process_cpuid()
unsigned int eax, ebx, ecx, edx;
unsigned int fms, family, model, stepping, ecx_flags, edx_flags;
unsigned long long ucode_patch = 0;
+ bool ucode_patch_valid = false;
eax = ebx = ecx = edx = 0;
@@ -5650,8 +6762,12 @@ void process_cpuid()
ecx_flags = ecx;
edx_flags = edx;
- if (get_msr(sched_getcpu(), MSR_IA32_UCODE_REV, &ucode_patch))
- warnx("get_msr(UCODE)");
+ if (!no_msr) {
+ if (get_msr(sched_getcpu(), MSR_IA32_UCODE_REV, &ucode_patch))
+ warnx("get_msr(UCODE)");
+ else
+ ucode_patch_valid = true;
+ }
/*
* check max extended function levels of CPUID.
@@ -5662,9 +6778,12 @@ void process_cpuid()
__cpuid(0x80000000, max_extended_level, ebx, ecx, edx);
if (!quiet) {
- fprintf(outf, "CPUID(1): family:model:stepping 0x%x:%x:%x (%d:%d:%d) microcode 0x%x\n",
- family, model, stepping, family, model, stepping,
- (unsigned int)((ucode_patch >> 32) & 0xFFFFFFFF));
+ fprintf(outf, "CPUID(1): family:model:stepping 0x%x:%x:%x (%d:%d:%d)",
+ family, model, stepping, family, model, stepping);
+ if (ucode_patch_valid)
+ fprintf(outf, " microcode 0x%x", (unsigned int)((ucode_patch >> 32) & 0xFFFFFFFF));
+ fputc('\n', outf);
+
fprintf(outf, "CPUID(0x80000000): max_extended_levels: 0x%x\n", max_extended_level);
fprintf(outf, "CPUID(1): %s %s %s %s %s %s %s %s %s %s\n",
ecx_flags & (1 << 0) ? "SSE3" : "-",
@@ -5700,10 +6819,11 @@ void process_cpuid()
__cpuid(0x6, eax, ebx, ecx, edx);
has_aperf = ecx & (1 << 0);
- if (has_aperf) {
+ if (has_aperf && has_amperf_access()) {
BIC_PRESENT(BIC_Avg_MHz);
BIC_PRESENT(BIC_Busy);
BIC_PRESENT(BIC_Bzy_MHz);
+ BIC_PRESENT(BIC_IPC);
}
do_dts = eax & (1 << 0);
if (do_dts)
@@ -5786,6 +6906,15 @@ void process_cpuid()
base_mhz = max_mhz = bus_mhz = edx = 0;
__cpuid(0x16, base_mhz, max_mhz, bus_mhz, edx);
+
+ bclk = bus_mhz;
+
+ base_hz = base_mhz * 1000000;
+ has_base_hz = 1;
+
+ if (platform->enable_tsc_tweak)
+ tsc_tweak = base_hz / tsc_hz;
+
if (!quiet)
fprintf(outf, "CPUID(0x16): base_mhz: %d max_mhz: %d bus_mhz: %d\n",
base_mhz, max_mhz, bus_mhz);
@@ -5814,7 +6943,7 @@ void probe_pm_features(void)
probe_thermal();
- if (platform->has_nhm_msrs)
+ if (platform->has_nhm_msrs && !no_msr)
BIC_PRESENT(BIC_SMI);
if (!quiet)
@@ -6142,6 +7271,7 @@ void topology_update(void)
topo.allowed_packages = 0;
for_all_cpus(update_topo, ODD_COUNTERS);
}
+
void setup_all_buffers(bool startup)
{
topology_probe(startup);
@@ -6169,21 +7299,129 @@ void set_base_cpu(void)
err(-ENODEV, "No valid cpus found");
}
+static void set_amperf_source(void)
+{
+ amperf_source = AMPERF_SOURCE_PERF;
+
+ const bool aperf_required = is_aperf_access_required();
+
+ if (no_perf || !aperf_required || !has_amperf_access_via_perf())
+ amperf_source = AMPERF_SOURCE_MSR;
+
+ if (quiet || !debug)
+ return;
+
+ fprintf(outf, "aperf/mperf source preference: %s\n", amperf_source == AMPERF_SOURCE_MSR ? "msr" : "perf");
+}
+
+bool has_added_counters(void)
+{
+ /*
+ * It only makes sense to call this after the command line is parsed,
+ * otherwise sys structure is not populated.
+ */
+
+ return sys.added_core_counters | sys.added_thread_counters | sys.added_package_counters;
+}
+
+bool is_msr_access_required(void)
+{
+ if (no_msr)
+ return false;
+
+ if (has_added_counters())
+ return true;
+
+ return BIC_IS_ENABLED(BIC_SMI)
+ || BIC_IS_ENABLED(BIC_CPU_c1)
+ || BIC_IS_ENABLED(BIC_CPU_c3)
+ || BIC_IS_ENABLED(BIC_CPU_c6)
+ || BIC_IS_ENABLED(BIC_CPU_c7)
+ || BIC_IS_ENABLED(BIC_Mod_c6)
+ || BIC_IS_ENABLED(BIC_CoreTmp)
+ || BIC_IS_ENABLED(BIC_Totl_c0)
+ || BIC_IS_ENABLED(BIC_Any_c0)
+ || BIC_IS_ENABLED(BIC_GFX_c0)
+ || BIC_IS_ENABLED(BIC_CPUGFX)
+ || BIC_IS_ENABLED(BIC_Pkgpc3)
+ || BIC_IS_ENABLED(BIC_Pkgpc6)
+ || BIC_IS_ENABLED(BIC_Pkgpc2)
+ || BIC_IS_ENABLED(BIC_Pkgpc7)
+ || BIC_IS_ENABLED(BIC_Pkgpc8)
+ || BIC_IS_ENABLED(BIC_Pkgpc9)
+ || BIC_IS_ENABLED(BIC_Pkgpc10)
+ /* TODO: Multiplex access with perf */
+ || BIC_IS_ENABLED(BIC_CorWatt)
+ || BIC_IS_ENABLED(BIC_Cor_J)
+ || BIC_IS_ENABLED(BIC_PkgWatt)
+ || BIC_IS_ENABLED(BIC_CorWatt)
+ || BIC_IS_ENABLED(BIC_GFXWatt)
+ || BIC_IS_ENABLED(BIC_RAMWatt)
+ || BIC_IS_ENABLED(BIC_Pkg_J)
+ || BIC_IS_ENABLED(BIC_Cor_J)
+ || BIC_IS_ENABLED(BIC_GFX_J)
+ || BIC_IS_ENABLED(BIC_RAM_J)
+ || BIC_IS_ENABLED(BIC_PKG__)
+ || BIC_IS_ENABLED(BIC_RAM__)
+ || BIC_IS_ENABLED(BIC_PkgTmp)
+ || (is_aperf_access_required() && !has_amperf_access_via_perf());
+}
+
+void check_msr_access(void)
+{
+ if (!is_msr_access_required())
+ no_msr = 1;
+
+ check_dev_msr();
+ check_msr_permission();
+
+ if (no_msr)
+ bic_disable_msr_access();
+}
+
+void check_perf_access(void)
+{
+ const bool intrcount_required = BIC_IS_ENABLED(BIC_IPC);
+
+ if (no_perf || !intrcount_required || !has_instr_count_access())
+ bic_enabled &= ~BIC_IPC;
+
+ const bool aperf_required = is_aperf_access_required();
+
+ if (!aperf_required || !has_amperf_access()) {
+ bic_enabled &= ~BIC_Avg_MHz;
+ bic_enabled &= ~BIC_Busy;
+ bic_enabled &= ~BIC_Bzy_MHz;
+ bic_enabled &= ~BIC_IPC;
+ }
+}
+
void turbostat_init()
{
setup_all_buffers(true);
set_base_cpu();
- check_dev_msr();
- check_permissions();
+ check_msr_access();
+ check_perf_access();
process_cpuid();
probe_pm_features();
+ set_amperf_source();
linux_perf_init();
+ rapl_perf_init();
for_all_cpus(get_cpu_type, ODD_COUNTERS);
for_all_cpus(get_cpu_type, EVEN_COUNTERS);
if (DO_BIC(BIC_IPC))
(void)get_instr_count_fd(base_cpu);
+
+ /*
+ * If TSC tweak is needed, but couldn't get it,
+ * disable more BICs, since it can't be reported accurately.
+ */
+ if (platform->enable_tsc_tweak && !has_base_hz) {
+ bic_enabled &= ~BIC_Busy;
+ bic_enabled &= ~BIC_Bzy_MHz;
+ }
}
int fork_it(char **argv)
@@ -6259,7 +7497,7 @@ int get_and_dump_counters(void)
void print_version()
{
- fprintf(outf, "turbostat version 2023.11.07 - Len Brown <lenb@kernel.org>\n");
+ fprintf(outf, "turbostat version 2024.04.08 - Len Brown <lenb@kernel.org>\n");
}
#define COMMAND_LINE_SIZE 2048
@@ -6291,6 +7529,9 @@ int add_counter(unsigned int msr_num, char *path, char *name,
{
struct msr_counter *msrp;
+ if (no_msr && msr_num)
+ errx(1, "Requested MSR counter 0x%x, but in --no-msr mode", msr_num);
+
msrp = calloc(1, sizeof(struct msr_counter));
if (msrp == NULL) {
perror("calloc");
@@ -6595,6 +7836,8 @@ void cmdline(int argc, char **argv)
{ "list", no_argument, 0, 'l' },
{ "out", required_argument, 0, 'o' },
{ "quiet", no_argument, 0, 'q' },
+ { "no-msr", no_argument, 0, 'M' },
+ { "no-perf", no_argument, 0, 'P' },
{ "show", required_argument, 0, 's' },
{ "Summary", no_argument, 0, 'S' },
{ "TCC", required_argument, 0, 'T' },
@@ -6604,7 +7847,25 @@ void cmdline(int argc, char **argv)
progname = argv[0];
- while ((opt = getopt_long_only(argc, argv, "+C:c:Dde:hi:Jn:o:qST:v", long_options, &option_index)) != -1) {
+ /*
+ * Parse some options early, because they may make other options invalid,
+ * like adding the MSR counter with --add and at the same time using --no-msr.
+ */
+ while ((opt = getopt_long_only(argc, argv, "MP", long_options, &option_index)) != -1) {
+ switch (opt) {
+ case 'M':
+ no_msr = 1;
+ break;
+ case 'P':
+ no_perf = 1;
+ break;
+ default:
+ break;
+ }
+ }
+ optind = 0;
+
+ while ((opt = getopt_long_only(argc, argv, "+C:c:Dde:hi:Jn:o:qMST:v", long_options, &option_index)) != -1) {
switch (opt) {
case 'a':
parse_add_command(optarg);
@@ -6662,6 +7923,10 @@ void cmdline(int argc, char **argv)
case 'q':
quiet = 1;
break;
+ case 'M':
+ case 'P':
+ /* Parsed earlier */
+ break;
case 'n':
num_iterations = strtod(optarg, NULL);
@@ -6704,6 +7969,22 @@ void cmdline(int argc, char **argv)
}
}
+void set_rlimit(void)
+{
+ struct rlimit limit;
+
+ if (getrlimit(RLIMIT_NOFILE, &limit) < 0)
+ err(1, "Failed to get rlimit");
+
+ if (limit.rlim_max < MAX_NOFILE)
+ limit.rlim_max = MAX_NOFILE;
+ if (limit.rlim_cur < MAX_NOFILE)
+ limit.rlim_cur = MAX_NOFILE;
+
+ if (setrlimit(RLIMIT_NOFILE, &limit) < 0)
+ err(1, "Failed to set rlimit");
+}
+
int main(int argc, char **argv)
{
int fd, ret;
@@ -6729,9 +8010,13 @@ skip_cgroup_setting:
probe_sysfs();
+ if (!getuid())
+ set_rlimit();
+
turbostat_init();
- msr_sum_record();
+ if (!no_msr)
+ msr_sum_record();
/* dump counters and exit */
if (dump_only)