summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* Linux 4.14.149v4.14.149Greg Kroah-Hartman2019-10-111-1/+1
|
* ASoC: sgtl5000: Improve VAG power and mute controlOleksandr Suvorov2019-10-111-30/+202
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit b1f373a11d25fc9a5f7679c9b85799fe09b0dc4a ] VAG power control is improved to fit the manual [1]. This patch fixes as minimum one bug: if customer muxes Headphone to Line-In right after boot, the VAG power remains off that leads to poor sound quality from line-in. I.e. after boot: - Connect sound source to Line-In jack; - Connect headphone to HP jack; - Run following commands: $ amixer set 'Headphone' 80% $ amixer set 'Headphone Mux' LINE_IN Change VAG power on/off control according to the following algorithm: - turn VAG power ON on the 1st incoming event. - keep it ON if there is any active VAG consumer (ADC/DAC/HP/Line-In). - turn VAG power OFF when there is the latest consumer's pre-down event come. - always delay after VAG power OFF to avoid pop. - delay after VAG power ON if the initiative consumer is Line-In, this prevents pop during line-in muxing. According to the data sheet [1], to avoid any pops/clicks, the outputs should be muted during input/output routing changes. [1] https://www.nxp.com/docs/en/data-sheet/SGTL5000.pdf Cc: stable@vger.kernel.org Fixes: 9b34e6cc3bc2 ("ASoC: Add Freescale SGTL5000 codec support") Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20190719100524.23300-3-oleksandr.suvorov@toradex.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* nl80211: validate beacon headJohannes Berg2019-10-111-0/+38
| | | | | | | | | | | | | | | | | | | | commit f88eb7c0d002a67ef31aeb7850b42ff69abc46dc upstream. We currently don't validate the beacon head, i.e. the header, fixed part and elements that are to go in front of the TIM element. This means that the variable elements there can be malformed, e.g. have a length exceeding the buffer size, but most downstream code from this assumes that this has already been checked. Add the necessary checks to the netlink policy. Cc: stable@vger.kernel.org Fixes: ed1b6cc7f80f ("cfg80211/nl80211: add beacon settings") Link: https://lore.kernel.org/r/1569009255-I7ac7fbe9436e9d8733439eab8acbbd35e55c74ef@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* cfg80211: Use const more consistently in for_each_element macrosJouni Malinen2019-10-111-9/+9
| | | | | | | | | | | | | | | commit 7388afe09143210f555bdd6c75035e9acc1fab96 upstream. Enforce the first argument to be a correct type of a pointer to struct element and avoid unnecessary typecasts from const to non-const pointers (the change in validate_ie_attr() is needed to make this part work). In addition, avoid signed/unsigned comparison within for_each_element() and mark struct element packed just in case. Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* cfg80211: add and use strongly typed element iteration macrosJohannes Berg2019-10-112-8/+59
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 0f3b07f027f87a38ebe5c436490095df762819be upstream. Rather than always iterating elements from frames with pure u8 pointers, add a type "struct element" that encapsulates the id/datalen/data format of them. Then, add the element iteration macros * for_each_element * for_each_element_id * for_each_element_extid which take, as their first 'argument', such a structure and iterate through a given u8 array interpreting it as elements. While at it and since we'll need it, also add * for_each_subelement * for_each_subelement_id * for_each_subelement_extid which instead of taking data/length just take an outer element and use its data/datalen. Also add for_each_element_completed() to determine if any of the loops above completed, i.e. it was able to parse all of the elements successfully and no data remained. Use for_each_element_id() in cfg80211_find_ie_match() as the first user of this. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* coresight: etm4x: Use explicit barriers on enable/disableAndrew Murray2019-10-111-2/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 1004ce4c255fc3eb3ad9145ddd53547d1b7ce327 upstream. Synchronization is recommended before disabling the trace registers to prevent any start or stop points being speculative at the point of disabling the unit (section 7.3.77 of ARM IHI 0064D). Synchronization is also recommended after programming the trace registers to ensure all updates are committed prior to normal code resuming (section 4.3.7 of ARM IHI 0064D). Let's ensure these syncronization points are present in the code and clearly commented. Note that we could rely on the barriers in CS_LOCK and coresight_disclaim_device_unlocked or the context switch to user space - however coresight may be of use in the kernel. On armv8 the mb macro is defined as dsb(sy) - Given that the etm4x is only used on armv8 let's directly use dsb(sy) instead of mb(). This removes some ambiguity and makes it easier to correlate the code with the TRM. Signed-off-by: Andrew Murray <andrew.murray@arm.com> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> [Fixed capital letter for "use" in title] Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20190829202842.580-11-mathieu.poirier@linaro.org Cc: stable@vger.kernel.org # 4.9+ Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* vfs: Fix EOVERFLOW testing in put_compat_statfs64Eric Sandeen2019-10-111-13/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | commit cc3a7bfe62b947b423fcb2cfe89fcba92bf48fa3 upstream. Today, put_compat_statfs64() disallows nearly any field value over 2^32 if f_bsize is only 32 bits, but that makes no sense. compat_statfs64 is there for the explicit purpose of providing 64-bit fields for f_files, f_ffree, etc. And f_bsize is always only 32 bits. As a result, 32-bit userspace gets -EOVERFLOW for i.e. large file counts even with -D_FILE_OFFSET_BITS=64 set. In reality, only f_bsize and f_frsize can legitimately overflow (fields like f_type and f_namelen should never be large), so test only those fields. This bug was discussed at length some time ago, and this is the proposal Al suggested at https://lkml.org/lkml/2018/8/6/640. It seemed to get dropped amid the discussion of other related changes, but this part seems obviously correct on its own, so I've picked it up and sent it, for expediency. Fixes: 64d2ab32efe3 ("vfs: fix put_compat_statfs64() does not handle errors") Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* perf stat: Reset previous counts on repeat with intervalSrikar Dronamraju2019-10-113-0/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit b63fd11cced17fcb8e133def29001b0f6aaa5e06 ] When using 'perf stat' with repeat and interval option, it shows wrong values for events. The wrong values will be shown for the first interval on the second and subsequent repetitions. Without the fix: # perf stat -r 3 -I 2000 -e faults -e sched:sched_switch -a sleep 5 2.000282489 53 faults 2.000282489 513 sched:sched_switch 4.005478208 3,721 faults 4.005478208 2,666 sched:sched_switch 5.025470933 395 faults 5.025470933 1,307 sched:sched_switch 2.009602825 1,84,46,74,40,73,70,95,47,520 faults <------ 2.009602825 1,84,46,74,40,73,70,95,49,568 sched:sched_switch <------ 4.019612206 4,730 faults 4.019612206 2,746 sched:sched_switch 5.039615484 3,953 faults 5.039615484 1,496 sched:sched_switch 2.000274620 1,84,46,74,40,73,70,95,47,520 faults <------ 2.000274620 1,84,46,74,40,73,70,95,47,520 sched:sched_switch <------ 4.000480342 4,282 faults 4.000480342 2,303 sched:sched_switch 5.000916811 1,322 faults 5.000916811 1,064 sched:sched_switch # prev_raw_counts is allocated when using intervals. This is used when calculating the difference in the counts of events when using interval. The current counts are stored in prev_raw_counts to calculate the differences in the next iteration. On the first interval of the second and subsequent repetitions, prev_raw_counts would be the values stored in the last interval of the previous repetitions, while the current counts will only be for the first interval of the current repetition. Hence there is a possibility of events showing up as big number. Fix this by resetting prev_raw_counts whenever perf stat repeats the command. With the fix: # perf stat -r 3 -I 2000 -e faults -e sched:sched_switch -a sleep 5 2.019349347 2,597 faults 2.019349347 2,753 sched:sched_switch 4.019577372 3,098 faults 4.019577372 2,532 sched:sched_switch 5.019415481 1,879 faults 5.019415481 1,356 sched:sched_switch 2.000178813 8,468 faults 2.000178813 2,254 sched:sched_switch 4.000404621 7,440 faults 4.000404621 1,266 sched:sched_switch 5.040196079 2,458 faults 5.040196079 556 sched:sched_switch 2.000191939 6,870 faults 2.000191939 1,170 sched:sched_switch 4.000414103 541 faults 4.000414103 902 sched:sched_switch 5.000809863 450 faults 5.000809863 364 sched:sched_switch # Committer notes: This was broken since the cset introducing the --interval feature, i.e. --repeat + --interval wasn't tested at that point, add the Fixes tag so that automatic scripts can pick this up. Fixes: 13370a9b5bb8 ("perf stat: Add interval printing") Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Stephane Eranian <eranian@google.com> Cc: stable@vger.kernel.org # v3.9+ Link: http://lore.kernel.org/lkml/20190904094738.9558-2-srikar@linux.vnet.ibm.com [ Fixed up conflicts with libperf, i.e. some perf_{evsel,evlist} lost the 'perf' prefix ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* perf stat: Fix a segmentation fault when using repeat foreverSrikar Dronamraju2019-10-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 443f2d5ba13d65ccfd879460f77941875159d154 ] Observe a segmentation fault when 'perf stat' is asked to repeat forever with the interval option. Without fix: # perf stat -r 0 -I 5000 -e cycles -a sleep 10 # time counts unit events 5.000211692 3,13,89,82,34,157 cycles 10.000380119 1,53,98,52,22,294 cycles 10.040467280 17,16,79,265 cycles Segmentation fault This problem was only observed when we use forever option aka -r 0 and works with limited repeats. Calling print_counter with ts being set to NULL, is not a correct option when interval is set. Hence avoid print_counter(NULL,..) if interval is set. With fix: # perf stat -r 0 -I 5000 -e cycles -a sleep 10 # time counts unit events 5.019866622 3,15,14,43,08,697 cycles 10.039865756 3,15,16,31,95,261 cycles 10.059950628 1,26,05,47,158 cycles 5.009902655 3,14,52,62,33,932 cycles 10.019880228 3,14,52,22,89,154 cycles 10.030543876 66,90,18,333 cycles 5.009848281 3,14,51,98,25,437 cycles 10.029854402 3,15,14,93,04,918 cycles 5.009834177 3,14,51,95,92,316 cycles Committer notes: Did the 'git bisect' to find the cset introducing the problem to add the Fixes tag below, and at that time the problem reproduced as: (gdb) run stat -r0 -I500 sleep 1 <SNIP> Program received signal SIGSEGV, Segmentation fault. print_interval (prefix=prefix@entry=0x7fffffffc8d0 "", ts=ts@entry=0x0) at builtin-stat.c:866 866 sprintf(prefix, "%6lu.%09lu%s", ts->tv_sec, ts->tv_nsec, csv_sep); (gdb) bt #0 print_interval (prefix=prefix@entry=0x7fffffffc8d0 "", ts=ts@entry=0x0) at builtin-stat.c:866 #1 0x000000000041860a in print_counters (ts=ts@entry=0x0, argc=argc@entry=2, argv=argv@entry=0x7fffffffd640) at builtin-stat.c:938 #2 0x0000000000419a7f in cmd_stat (argc=2, argv=0x7fffffffd640, prefix=<optimized out>) at builtin-stat.c:1411 #3 0x000000000045c65a in run_builtin (p=p@entry=0x6291b8 <commands+216>, argc=argc@entry=5, argv=argv@entry=0x7fffffffd640) at perf.c:370 #4 0x000000000045c893 in handle_internal_command (argc=5, argv=0x7fffffffd640) at perf.c:429 #5 0x000000000045c8f1 in run_argv (argcp=argcp@entry=0x7fffffffd4ac, argv=argv@entry=0x7fffffffd4a0) at perf.c:473 #6 0x000000000045cac9 in main (argc=<optimized out>, argv=<optimized out>) at perf.c:588 (gdb) Mostly the same as just before this patch: Program received signal SIGSEGV, Segmentation fault. 0x00000000005874a7 in print_interval (config=0xa1f2a0 <stat_config>, evlist=0xbc9b90, prefix=0x7fffffffd1c0 "`", ts=0x0) at util/stat-display.c:964 964 sprintf(prefix, "%6lu.%09lu%s", ts->tv_sec, ts->tv_nsec, config->csv_sep); (gdb) bt #0 0x00000000005874a7 in print_interval (config=0xa1f2a0 <stat_config>, evlist=0xbc9b90, prefix=0x7fffffffd1c0 "`", ts=0x0) at util/stat-display.c:964 #1 0x0000000000588047 in perf_evlist__print_counters (evlist=0xbc9b90, config=0xa1f2a0 <stat_config>, _target=0xa1f0c0 <target>, ts=0x0, argc=2, argv=0x7fffffffd670) at util/stat-display.c:1172 #2 0x000000000045390f in print_counters (ts=0x0, argc=2, argv=0x7fffffffd670) at builtin-stat.c:656 #3 0x0000000000456bb5 in cmd_stat (argc=2, argv=0x7fffffffd670) at builtin-stat.c:1960 #4 0x00000000004dd2e0 in run_builtin (p=0xa30e00 <commands+288>, argc=5, argv=0x7fffffffd670) at perf.c:310 #5 0x00000000004dd54d in handle_internal_command (argc=5, argv=0x7fffffffd670) at perf.c:362 #6 0x00000000004dd694 in run_argv (argcp=0x7fffffffd4cc, argv=0x7fffffffd4c0) at perf.c:406 #7 0x00000000004dda11 in main (argc=5, argv=0x7fffffffd670) at perf.c:531 (gdb) Fixes: d4f63a4741a8 ("perf stat: Introduce print_counters function") Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: stable@vger.kernel.org # v4.2+ Link: http://lore.kernel.org/lkml/20190904094738.9558-3-srikar@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* perf tools: Fix segfault in cpu_cache_level__read()Jiri Olsa2019-10-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 0216234c2eed1367a318daeb9f4a97d8217412a0 ] We release wrong pointer on error path in cpu_cache_level__read function, leading to segfault: (gdb) r record ls Starting program: /root/perf/tools/perf/perf record ls ... [ perf record: Woken up 1 times to write data ] double free or corruption (out) Thread 1 "perf" received signal SIGABRT, Aborted. 0x00007ffff7463798 in raise () from /lib64/power9/libc.so.6 (gdb) bt #0 0x00007ffff7463798 in raise () from /lib64/power9/libc.so.6 #1 0x00007ffff7443bac in abort () from /lib64/power9/libc.so.6 #2 0x00007ffff74af8bc in __libc_message () from /lib64/power9/libc.so.6 #3 0x00007ffff74b92b8 in malloc_printerr () from /lib64/power9/libc.so.6 #4 0x00007ffff74bb874 in _int_free () from /lib64/power9/libc.so.6 #5 0x0000000010271260 in __zfree (ptr=0x7fffffffa0b0) at ../../lib/zalloc.. #6 0x0000000010139340 in cpu_cache_level__read (cache=0x7fffffffa090, cac.. #7 0x0000000010143c90 in build_caches (cntp=0x7fffffffa118, size=<optimiz.. ... Releasing the proper pointer. Fixes: 720e98b5faf1 ("perf tools: Add perf data cache feature") Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org: # v4.6+ Link: http://lore.kernel.org/lkml/20190912105235.10689-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* tick: broadcast-hrtimer: Fix a race in bc_set_nextBalasubramani Vivekanandan2019-10-111-28/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit b9023b91dd020ad7e093baa5122b6968c48cc9e0 ] When a cpu requests broadcasting, before starting the tick broadcast hrtimer, bc_set_next() checks if the timer callback (bc_handler) is active using hrtimer_try_to_cancel(). But hrtimer_try_to_cancel() does not provide the required synchronization when the callback is active on other core. The callback could have already executed tick_handle_oneshot_broadcast() and could have also returned. But still there is a small time window where the hrtimer_try_to_cancel() returns -1. In that case bc_set_next() returns without doing anything, but the next_event of the tick broadcast clock device is already set to a timeout value. In the race condition diagram below, CPU #1 is running the timer callback and CPU #2 is entering idle state and so calls bc_set_next(). In the worst case, the next_event will contain an expiry time, but the hrtimer will not be started which happens when the racing callback returns HRTIMER_NORESTART. The hrtimer might never recover if all further requests from the CPUs to subscribe to tick broadcast have timeout greater than the next_event of tick broadcast clock device. This leads to cascading of failures and finally noticed as rcu stall warnings Here is a depiction of the race condition CPU #1 (Running timer callback) CPU #2 (Enter idle and subscribe to tick broadcast) --------------------- --------------------- __run_hrtimer() tick_broadcast_enter() bc_handler() __tick_broadcast_oneshot_control() tick_handle_oneshot_broadcast() raw_spin_lock(&tick_broadcast_lock); dev->next_event = KTIME_MAX; //wait for tick_broadcast_lock //next_event for tick broadcast clock set to KTIME_MAX since no other cores subscribed to tick broadcasting raw_spin_unlock(&tick_broadcast_lock); if (dev->next_event == KTIME_MAX) return HRTIMER_NORESTART // callback function exits without restarting the hrtimer //tick_broadcast_lock acquired raw_spin_lock(&tick_broadcast_lock); tick_broadcast_set_event() clockevents_program_event() dev->next_event = expires; bc_set_next() hrtimer_try_to_cancel() //returns -1 since the timer callback is active. Exits without restarting the timer cpu_base->running = NULL; The comment that hrtimer cannot be armed from within the callback is wrong. It is fine to start the hrtimer from within the callback. Also it is safe to start the hrtimer from the enter/exit idle code while the broadcast handler is active. The enter/exit idle code and the broadcast handler are synchronized using tick_broadcast_lock. So there is no need for the existing try to cancel logic. All this can be removed which will eliminate the race condition as well. Fixes: 5d1638acb9f6 ("tick: Introduce hrtimer based broadcast") Originally-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Balasubramani Vivekanandan <balasubramani_vivekanandan@mentor.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20190926135101.12102-2-balasubramani_vivekanandan@mentor.com Signed-off-by: Sasha Levin <sashal@kernel.org>
* tools lib traceevent: Do not free tep->cmdlines in add_new_comm() on failureSteven Rostedt (VMware)2019-10-111-2/+1
| | | | | | | | | | | | | | | | | | | | | [ Upstream commit e0d2615856b2046c2e8d5bfd6933f37f69703b0b ] If the re-allocation of tep->cmdlines succeeds, then the previous allocation of tep->cmdlines will be freed. If we later fail in add_new_comm(), we must not free cmdlines, and also should assign tep->cmdlines to the new allocation. Otherwise when freeing tep, the tep->cmdlines will be pointing to garbage. Fixes: a6d2a61ac653a ("tools lib traceevent: Remove some die() calls") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: linux-trace-devel@vger.kernel.org Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20190828191819.970121417@goodmis.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* powerpc/pseries: Fix cpu_hotplug_lock acquisition in resize_hpt()Gautham R. Shenoy2019-10-112-3/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit c784be435d5dae28d3b03db31753dd7a18733f0c ] The calls to arch_add_memory()/arch_remove_memory() are always made with the read-side cpu_hotplug_lock acquired via memory_hotplug_begin(). On pSeries, arch_add_memory()/arch_remove_memory() eventually call resize_hpt() which in turn calls stop_machine() which acquires the read-side cpu_hotplug_lock again, thereby resulting in the recursive acquisition of this lock. In the absence of CONFIG_PROVE_LOCKING, we hadn't observed a system lockup during a memory hotplug operation because cpus_read_lock() is a per-cpu rwsem read, which, in the fast-path (in the absence of the writer, which in our case is a CPU-hotplug operation) simply increments the read_count on the semaphore. Thus a recursive read in the fast-path doesn't cause any problems. However, we can hit this problem in practice if there is a concurrent CPU-Hotplug operation in progress which is waiting to acquire the write-side of the lock. This will cause the second recursive read to block until the writer finishes. While the writer is blocked since the first read holds the lock. Thus both the reader as well as the writers fail to make any progress thereby blocking both CPU-Hotplug as well as Memory Hotplug operations. Memory-Hotplug CPU-Hotplug CPU 0 CPU 1 ------ ------ 1. down_read(cpu_hotplug_lock.rw_sem) [memory_hotplug_begin] 2. down_write(cpu_hotplug_lock.rw_sem) [cpu_up/cpu_down] 3. down_read(cpu_hotplug_lock.rw_sem) [stop_machine()] Lockdep complains as follows in these code-paths. swapper/0/1 is trying to acquire lock: (____ptrval____) (cpu_hotplug_lock.rw_sem){++++}, at: stop_machine+0x2c/0x60 but task is already holding lock: (____ptrval____) (cpu_hotplug_lock.rw_sem){++++}, at: mem_hotplug_begin+0x20/0x50 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(cpu_hotplug_lock.rw_sem); lock(cpu_hotplug_lock.rw_sem); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by swapper/0/1: #0: (____ptrval____) (&dev->mutex){....}, at: __driver_attach+0x12c/0x1b0 #1: (____ptrval____) (cpu_hotplug_lock.rw_sem){++++}, at: mem_hotplug_begin+0x20/0x50 #2: (____ptrval____) (mem_hotplug_lock.rw_sem){++++}, at: percpu_down_write+0x54/0x1a0 stack backtrace: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.0.0-rc5-58373-gbc99402235f3-dirty #166 Call Trace: dump_stack+0xe8/0x164 (unreliable) __lock_acquire+0x1110/0x1c70 lock_acquire+0x240/0x290 cpus_read_lock+0x64/0xf0 stop_machine+0x2c/0x60 pseries_lpar_resize_hpt+0x19c/0x2c0 resize_hpt_for_hotplug+0x70/0xd0 arch_add_memory+0x58/0xfc devm_memremap_pages+0x5e8/0x8f0 pmem_attach_disk+0x764/0x830 nvdimm_bus_probe+0x118/0x240 really_probe+0x230/0x4b0 driver_probe_device+0x16c/0x1e0 __driver_attach+0x148/0x1b0 bus_for_each_dev+0x90/0x130 driver_attach+0x34/0x50 bus_add_driver+0x1a8/0x360 driver_register+0x108/0x170 __nd_driver_register+0xd0/0xf0 nd_pmem_driver_init+0x34/0x48 do_one_initcall+0x1e0/0x45c kernel_init_freeable+0x540/0x64c kernel_init+0x2c/0x160 ret_from_kernel_thread+0x5c/0x68 Fix this issue by 1) Requiring all the calls to pseries_lpar_resize_hpt() be made with cpu_hotplug_lock held. 2) In pseries_lpar_resize_hpt() invoke stop_machine_cpuslocked() as a consequence of 1) 3) To satisfy 1), in hpt_order_set(), call mmu_hash_ops.resize_hpt() with cpu_hotplug_lock held. Fixes: dbcf929c0062 ("powerpc/pseries: Add support for hash table resizing") Cc: stable@vger.kernel.org # v4.11+ Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1557906352-29048-1-git-send-email-ego@linux.vnet.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
* nbd: fix max number of supported devsMike Christie2019-10-111-14/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit e9e006f5fcf2bab59149cb38a48a4817c1b538b4 ] This fixes a bug added in 4.10 with commit: commit 9561a7ade0c205bc2ee035a2ac880478dcc1a024 Author: Josef Bacik <jbacik@fb.com> Date: Tue Nov 22 14:04:40 2016 -0500 nbd: add multi-connection support that limited the number of devices to 256. Before the patch we could create 1000s of devices, but the patch switched us from using our own thread to using a work queue which has a default limit of 256 active works. The problem is that our recv_work function sits in a loop until disconnection but only handles IO for one connection. The work is started when the connection is started/restarted, but if we end up creating 257 or more connections, the queue_work call just queues connection257+'s recv_work and that waits for connection 1 - 256's recv_work to be disconnected and that work instance completing. Instead of reverting back to kthreads, this has us allocate a workqueue_struct per device, so we can block in the work. Cc: stable@vger.kernel.org Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
* block/ndb: add WQ_UNBOUND to the knbd-recv workqueueDan Melnic2019-10-111-1/+2
| | | | | | | | | | | | [ Upstream commit 2189c97cdbed630d5971ab22f05dc998774e354e ] Add WQ_UNBOUND to the knbd-recv workqueue so we're not bound to a single CPU that is selected at device creation time. Signed-off-by: Dan Melnic <dmm@fb.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
* nbd: fix crash when the blksize is zeroXiubo Li2019-10-111-3/+20
| | | | | | | | | | | | | | [ Upstream commit 553768d1169a48c0cd87c4eb4ab57534ee663415 ] This will allow the blksize to be set zero and then use 1024 as default. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Xiubo Li <xiubli@redhat.com> [fix to use goto out instead of return in genl_connect] Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
* KVM: PPC: Book3S HV: XIVE: Free escalation interrupts before disabling the VPCédric Le Goater2019-10-111-8/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 237aed48c642328ff0ab19b63423634340224a06 ] When a vCPU is brought done, the XIVE VP (Virtual Processor) is first disabled and then the event notification queues are freed. When freeing the queues, we check for possible escalation interrupts and free them also. But when a XIVE VP is disabled, the underlying XIVE ENDs also are disabled in OPAL. When an END (Event Notification Descriptor) is disabled, its ESB pages (ESn and ESe) are disabled and loads return all 1s. Which means that any access on the ESB page of the escalation interrupt will return invalid values. When an interrupt is freed, the shutdown handler computes a 'saved_p' field from the value returned by a load in xive_do_source_set_mask(). This value is incorrect for escalation interrupts for the reason described above. This has no impact on Linux/KVM today because we don't make use of it but we will introduce in future changes a xive_get_irqchip_state() handler. This handler will use the 'saved_p' field to return the state of an interrupt and 'saved_p' being incorrect, softlockup will occur. Fix the vCPU cleanup sequence by first freeing the escalation interrupts if any, then disable the XIVE VP and last free the queues. Fixes: 90c73795afa2 ("KVM: PPC: Book3S HV: Add a new KVM device for the XIVE native exploitation mode") Fixes: 5af50993850a ("KVM: PPC: Book3S HV: Native usage of the XIVE interrupt controller") Cc: stable@vger.kernel.org # v4.12+ Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190806172538.5087-1-clg@kaod.org Signed-off-by: Sasha Levin <sashal@kernel.org>
* perf unwind: Fix libunwind build failure on i386 systemsArnaldo Carvalho de Melo2019-10-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 26acf400d2dcc72c7e713e1f55db47ad92010cc2 ] Naresh Kamboju reported, that on the i386 build pr_err() doesn't get defined properly due to header ordering: perf-in.o: In function `libunwind__x86_reg_id': tools/perf/util/libunwind/../../arch/x86/util/unwind-libunwind.c:109: undefined reference to `pr_err' Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* kernel/elfcore.c: include proper prototypesValdis Kletnieks2019-10-111-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 0f74914071ab7e7b78731ed62bf350e3a344e0a5 ] When building with W=1, gcc properly complains that there's no prototypes: CC kernel/elfcore.o kernel/elfcore.c:7:17: warning: no previous prototype for 'elf_core_extra_phdrs' [-Wmissing-prototypes] 7 | Elf_Half __weak elf_core_extra_phdrs(void) | ^~~~~~~~~~~~~~~~~~~~ kernel/elfcore.c:12:12: warning: no previous prototype for 'elf_core_write_extra_phdrs' [-Wmissing-prototypes] 12 | int __weak elf_core_write_extra_phdrs(struct coredump_params *cprm, loff_t offset) | ^~~~~~~~~~~~~~~~~~~~~~~~~~ kernel/elfcore.c:17:12: warning: no previous prototype for 'elf_core_write_extra_data' [-Wmissing-prototypes] 17 | int __weak elf_core_write_extra_data(struct coredump_params *cprm) | ^~~~~~~~~~~~~~~~~~~~~~~~~ kernel/elfcore.c:22:15: warning: no previous prototype for 'elf_core_extra_data_size' [-Wmissing-prototypes] 22 | size_t __weak elf_core_extra_data_size(void) | ^~~~~~~~~~~~~~~~~~~~~~~~ Provide the include file so gcc is happy, and we don't have potential code drift Link: http://lkml.kernel.org/r/29875.1565224705@turing-police Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* perf build: Add detection of java-11-openjdk-devel packageThomas Richter2019-10-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 815c1560bf8fd522b8d93a1d727868b910c1cc24 ] With Java 11 there is no seperate JRE anymore. Details: https://coderanch.com/t/701603/java/JRE-JDK Therefore the detection of the JRE needs to be adapted. This change works for s390 and x86. I have not tested other platforms. Committer testing: Continues to work with the OpenJDK 8: $ rm -f ~acme/lib64/libperf-jvmti.so $ rpm -qa | grep jdk-devel java-1.8.0-openjdk-devel-1.8.0.222.b10-0.fc30.x86_64 $ git log --oneline -1 a51937170f33 (HEAD -> perf/core) perf build: Add detection of java-11-openjdk-devel package $ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf ; make -C tools/perf O=/tmp/build/perf install > /dev/null 2>1 $ ls -la ~acme/lib64/libperf-jvmti.so -rwxr-xr-x. 1 acme acme 230744 Sep 24 16:46 /home/acme/lib64/libperf-jvmti.so $ Suggested-by: Andreas Krebbel <krebbel@linux.ibm.com> Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hendrik Brueckner <brueckner@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Link: http://lore.kernel.org/lkml/20190909114116.50469-4-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* sched/core: Fix migration to invalid CPU in __set_cpus_allowed_ptr()KeMeng Shi2019-10-111-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 714e501e16cd473538b609b3e351b2cc9f7f09ed ] An oops can be triggered in the scheduler when running qemu on arm64: Unable to handle kernel paging request at virtual address ffff000008effe40 Internal error: Oops: 96000007 [#1] SMP Process migration/0 (pid: 12, stack limit = 0x00000000084e3736) pstate: 20000085 (nzCv daIf -PAN -UAO) pc : __ll_sc___cmpxchg_case_acq_4+0x4/0x20 lr : move_queued_task.isra.21+0x124/0x298 ... Call trace: __ll_sc___cmpxchg_case_acq_4+0x4/0x20 __migrate_task+0xc8/0xe0 migration_cpu_stop+0x170/0x180 cpu_stopper_thread+0xec/0x178 smpboot_thread_fn+0x1ac/0x1e8 kthread+0x134/0x138 ret_from_fork+0x10/0x18 __set_cpus_allowed_ptr() will choose an active dest_cpu in affinity mask to migrage the process if process is not currently running on any one of the CPUs specified in affinity mask. __set_cpus_allowed_ptr() will choose an invalid dest_cpu (dest_cpu >= nr_cpu_ids, 1024 in my virtual machine) if CPUS in an affinity mask are deactived by cpu_down after cpumask_intersects check. cpumask_test_cpu() of dest_cpu afterwards is overflown and may pass if corresponding bit is coincidentally set. As a consequence, kernel will access an invalid rq address associate with the invalid CPU in migration_cpu_stop->__migrate_task->move_queued_task and the Oops occurs. The reproduce the crash: 1) A process repeatedly binds itself to cpu0 and cpu1 in turn by calling sched_setaffinity. 2) A shell script repeatedly does "echo 0 > /sys/devices/system/cpu/cpu1/online" and "echo 1 > /sys/devices/system/cpu/cpu1/online" in turn. 3) Oops appears if the invalid CPU is set in memory after tested cpumask. Signed-off-by: KeMeng Shi <shikemeng@huawei.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/1568616808-16808-1-git-send-email-shikemeng@huawei.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* fuse: fix memleak in cuse_channel_openzhengbin2019-10-111-0/+1
| | | | | | | | | | | | | | | | [ Upstream commit 9ad09b1976c562061636ff1e01bfc3a57aebe56b ] If cuse_send_init fails, need to fuse_conn_put cc->fc. cuse_channel_open->fuse_conn_init->refcount_set(&fc->count, 1) ->fuse_dev_alloc->fuse_conn_get ->fuse_dev_free->fuse_conn_put Fixes: cc080e9e9be1 ("fuse: introduce per-instance fuse_dev structure") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* thermal: Fix use-after-free when unregistering thermal zone deviceIdo Schimmel2019-10-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 1851799e1d2978f68eea5d9dff322e121dcf59c1 ] thermal_zone_device_unregister() cancels the delayed work that polls the thermal zone, but it does not wait for it to finish. This is racy with respect to the freeing of the thermal zone device, which can result in a use-after-free [1]. Fix this by waiting for the delayed work to finish before freeing the thermal zone device. Note that thermal_zone_device_set_polling() is never invoked from an atomic context, so it is safe to call cancel_delayed_work_sync() that can block. [1] [ +0.002221] ================================================================== [ +0.000064] BUG: KASAN: use-after-free in __mutex_lock+0x1076/0x11c0 [ +0.000016] Read of size 8 at addr ffff8881e48e0450 by task kworker/1:0/17 [ +0.000023] CPU: 1 PID: 17 Comm: kworker/1:0 Not tainted 5.2.0-rc6-custom-02495-g8e73ca3be4af #1701 [ +0.000010] Hardware name: Mellanox Technologies Ltd. MSN2100-CB2FO/SA001017, BIOS 5.6.5 06/07/2016 [ +0.000016] Workqueue: events_freezable_power_ thermal_zone_device_check [ +0.000012] Call Trace: [ +0.000021] dump_stack+0xa9/0x10e [ +0.000020] print_address_description.cold.2+0x9/0x25e [ +0.000018] __kasan_report.cold.3+0x78/0x9d [ +0.000016] kasan_report+0xe/0x20 [ +0.000016] __mutex_lock+0x1076/0x11c0 [ +0.000014] step_wise_throttle+0x72/0x150 [ +0.000018] handle_thermal_trip+0x167/0x760 [ +0.000019] thermal_zone_device_update+0x19e/0x5f0 [ +0.000019] process_one_work+0x969/0x16f0 [ +0.000017] worker_thread+0x91/0xc40 [ +0.000014] kthread+0x33d/0x400 [ +0.000015] ret_from_fork+0x3a/0x50 [ +0.000020] Allocated by task 1: [ +0.000015] save_stack+0x19/0x80 [ +0.000015] __kasan_kmalloc.constprop.4+0xc1/0xd0 [ +0.000014] kmem_cache_alloc_trace+0x152/0x320 [ +0.000015] thermal_zone_device_register+0x1b4/0x13a0 [ +0.000015] mlxsw_thermal_init+0xc92/0x23d0 [ +0.000014] __mlxsw_core_bus_device_register+0x659/0x11b0 [ +0.000013] mlxsw_core_bus_device_register+0x3d/0x90 [ +0.000013] mlxsw_pci_probe+0x355/0x4b0 [ +0.000014] local_pci_probe+0xc3/0x150 [ +0.000013] pci_device_probe+0x280/0x410 [ +0.000013] really_probe+0x26a/0xbb0 [ +0.000013] driver_probe_device+0x208/0x2e0 [ +0.000013] device_driver_attach+0xfe/0x140 [ +0.000013] __driver_attach+0x110/0x310 [ +0.000013] bus_for_each_dev+0x14b/0x1d0 [ +0.000013] driver_register+0x1c0/0x400 [ +0.000015] mlxsw_sp_module_init+0x5d/0xd3 [ +0.000014] do_one_initcall+0x239/0x4dd [ +0.000013] kernel_init_freeable+0x42b/0x4e8 [ +0.000012] kernel_init+0x11/0x18b [ +0.000013] ret_from_fork+0x3a/0x50 [ +0.000015] Freed by task 581: [ +0.000013] save_stack+0x19/0x80 [ +0.000014] __kasan_slab_free+0x125/0x170 [ +0.000013] kfree+0xf3/0x310 [ +0.000013] thermal_release+0xc7/0xf0 [ +0.000014] device_release+0x77/0x200 [ +0.000014] kobject_put+0x1a8/0x4c0 [ +0.000014] device_unregister+0x38/0xc0 [ +0.000014] thermal_zone_device_unregister+0x54e/0x6a0 [ +0.000014] mlxsw_thermal_fini+0x184/0x35a [ +0.000014] mlxsw_core_bus_device_unregister+0x10a/0x640 [ +0.000013] mlxsw_devlink_core_bus_device_reload+0x92/0x210 [ +0.000015] devlink_nl_cmd_reload+0x113/0x1f0 [ +0.000014] genl_family_rcv_msg+0x700/0xee0 [ +0.000013] genl_rcv_msg+0xca/0x170 [ +0.000013] netlink_rcv_skb+0x137/0x3a0 [ +0.000012] genl_rcv+0x29/0x40 [ +0.000013] netlink_unicast+0x49b/0x660 [ +0.000013] netlink_sendmsg+0x755/0xc90 [ +0.000013] __sys_sendto+0x3de/0x430 [ +0.000013] __x64_sys_sendto+0xe2/0x1b0 [ +0.000013] do_syscall_64+0xa4/0x4d0 [ +0.000013] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ +0.000017] The buggy address belongs to the object at ffff8881e48e0008 which belongs to the cache kmalloc-2k of size 2048 [ +0.000012] The buggy address is located 1096 bytes inside of 2048-byte region [ffff8881e48e0008, ffff8881e48e0808) [ +0.000007] The buggy address belongs to the page: [ +0.000012] page:ffffea0007923800 refcount:1 mapcount:0 mapping:ffff88823680d0c0 index:0x0 compound_mapcount: 0 [ +0.000020] flags: 0x200000000010200(slab|head) [ +0.000019] raw: 0200000000010200 ffffea0007682008 ffffea00076ab808 ffff88823680d0c0 [ +0.000016] raw: 0000000000000000 00000000000d000d 00000001ffffffff 0000000000000000 [ +0.000007] page dumped because: kasan: bad access detected [ +0.000012] Memory state around the buggy address: [ +0.000012] ffff8881e48e0300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ +0.000012] ffff8881e48e0380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ +0.000012] >ffff8881e48e0400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ +0.000008] ^ [ +0.000012] ffff8881e48e0480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ +0.000012] ffff8881e48e0500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ +0.000007] ================================================================== Fixes: b1569e99c795 ("ACPI: move thermal trip handling to generic thermal layer") Reported-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* pwm: stm32-lp: Add check in case requested period cannot be achievedFabrice Gasnier2019-10-111-0/+6
| | | | | | | | | | | | | | | | | | [ Upstream commit c91e3234c6035baf5a79763cb4fcd5d23ce75c2b ] LPTimer can use a 32KHz clock for counting. It depends on clock tree configuration. In such a case, PWM output frequency range is limited. Although unlikely, nothing prevents user from requesting a PWM frequency above counting clock (32KHz for instance): - This causes (prd - 1) = 0xffff to be written in ARR register later in the apply() routine. This results in badly configured PWM period (and also duty_cycle). Add a check to report an error is such a case. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* pNFS: Ensure we do clear the return-on-close layout stateid on fatal errorsTrond Myklebust2019-10-111-2/+7
| | | | | | | | | | | | | | [ Upstream commit 9c47b18cf722184f32148784189fca945a7d0561 ] IF the server rejected our layout return with a state error such as NFS4ERR_BAD_STATEID, or even a stale inode error, then we do want to clear out all the remaining layout segments and mark that stateid as invalid. Fixes: 1c5bd76d17cca ("pNFS: Enable layoutreturn operation for...") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* drm/amdgpu: Check for valid number of registers to readTrek2019-10-111-0/+3
| | | | | | | | | | | | | | [ Upstream commit 73d8e6c7b841d9bf298c8928f228fb433676635c ] Do not try to allocate any amount of memory requested by the user. Instead limit it to 128 registers. Actually the longest series of consecutive allowed registers are 48, mmGB_TILE_MODE0-31 and mmGB_MACROTILE_MODE0-15 (0x2644-0x2673). Bug: https://bugs.freedesktop.org/show_bug.cgi?id=111273 Signed-off-by: Trek <trek00@inbox.ru> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* netfilter: nf_tables: allow lookups in dynamic setsFlorian Westphal2019-10-112-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit acab713177377d9e0889c46bac7ff0cfb9a90c4d ] This un-breaks lookups in sets that have the 'dynamic' flag set. Given this active example configuration: table filter { set set1 { type ipv4_addr size 64 flags dynamic,timeout timeout 1m } chain input { type filter hook input priority 0; policy accept; } } ... this works: nft add rule ip filter input add @set1 { ip saddr } -> whenever rule is triggered, the source ip address is inserted into the set (if it did not exist). This won't work: nft add rule ip filter input ip saddr @set1 counter Error: Could not process rule: Operation not supported In other words, we can add entries to the set, but then can't make matching decision based on that set. That is just wrong -- all set backends support lookups (else they would not be very useful). The failure comes from an explicit rejection in nft_lookup.c. Looking at the history, it seems like NFT_SET_EVAL used to mean 'set contains expressions' (aka. "is a meter"), for instance something like nft add rule ip filter input meter example { ip saddr limit rate 10/second } or nft add rule ip filter input meter example { ip saddr counter } The actual meaning of NFT_SET_EVAL however, is 'set can be updated from the packet path'. 'meters' and packet-path insertions into sets, such as 'add @set { ip saddr }' use exactly the same kernel code (nft_dynset.c) and thus require a set backend that provides the ->update() function. The only set that provides this also is the only one that has the NFT_SET_EVAL feature flag. Removing the wrong check makes the above example work. While at it, also fix the flag check during set instantiation to allow supported combinations only. Fixes: 8aeff920dcc9b3f ("netfilter: nf_tables: add stateful object reference to set elements") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* watchdog: aspeed: Add support for AST2600Ryan Chen2019-10-111-1/+3
| | | | | | | | | | | | | | [ Upstream commit b3528b4874480818e38e4da019d655413c233e6a ] The ast2600 can be supported by the same code as the ast2500. Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190819051738.17370-3-joel@jms.id.au Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* ceph: reconnect connection if session hang in opening stateErqi Chen2019-10-111-1/+3
| | | | | | | | | | | | | | | | | | | | [ Upstream commit 71a228bc8d65900179e37ac309e678f8c523f133 ] If client mds session is evicted in CEPH_MDS_SESSION_OPENING state, mds won't send session msg to client, and delayed_work skip CEPH_MDS_SESSION_OPENING state session, the session hang forever. Allow ceph_con_keepalive to reconnect a session in OPENING to avoid session hang. Also, ensure that we skip sessions in RESTARTING and REJECTED states since those states can't be resurrected by issuing a keepalive. Link: https://tracker.ceph.com/issues/41551 Signed-off-by: Erqi Chen chenerqi@gmail.com Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* ceph: fix directories inode i_blkbits initializationLuis Henriques2019-10-111-1/+6
| | | | | | | | | | | | | | | | | | | | | [ Upstream commit 750670341a24cb714e624e0fd7da30900ad93752 ] When filling an inode with info from the MDS, i_blkbits is being initialized using fl_stripe_unit, which contains the stripe unit in bytes. Unfortunately, this doesn't make sense for directories as they have fl_stripe_unit set to '0'. This means that i_blkbits will be set to 0xff, causing an UBSAN undefined behaviour in i_blocksize(): UBSAN: Undefined behaviour in ./include/linux/fs.h:731:12 shift exponent 255 is too large for 32-bit type 'int' Fix this by initializing i_blkbits to CEPH_BLOCK_SHIFT if fl_stripe_unit is zero. Signed-off-by: Luis Henriques <lhenriques@suse.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* xen/pci: reserve MCFG areas earlierIgor Druzhinin2019-10-111-6/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit a4098bc6eed5e31e0391bcc068e61804c98138df ] If MCFG area is not reserved in E820, Xen by default will defer its usage until Dom0 registers it explicitly after ACPI parser recognizes it as a reserved resource in DSDT. Having it reserved in E820 is not mandatory according to "PCI Firmware Specification, rev 3.2" (par. 4.1.2) and firmware is free to keep a hole in E820 in that place. Xen doesn't know what exactly is inside this hole since it lacks full ACPI view of the platform therefore it's potentially harmful to access MCFG region without additional checks as some machines are known to provide inconsistent information on the size of the region. Now xen_mcfg_late() runs after acpi_init() which is too late as some basic PCI enumeration starts exactly there as well. Trying to register a device prior to MCFG reservation causes multiple problems with PCIe extended capability initializations in Xen (e.g. SR-IOV VF BAR sizing). There are no convenient hooks for us to subscribe to so register MCFG areas earlier upon the first invocation of xen_add_device(). It should be safe to do once since all the boot time buses must have their MCFG areas in MCFG table already and we don't support PCI bus hot-plug. Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* 9p: avoid attaching writeback_fid on mmap with type PRIVATEChengguang Xu2019-10-111-0/+3
| | | | | | | | | | | | | | | [ Upstream commit c87a37ebd40b889178664c2c09cc187334146292 ] Currently on mmap cache policy, we always attach writeback_fid whether mmap type is SHARED or PRIVATE. However, in the use case of kata-container which combines 9p(Guest OS) with overlayfs(Host OS), this behavior will trigger overlayfs' copy-up when excute command inside container. Link: http://lkml.kernel.org/r/20190820100325.10313-1-cgxu519@zoho.com.cn Signed-off-by: Chengguang Xu <cgxu519@zoho.com.cn> Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr> Signed-off-by: Sasha Levin <sashal@kernel.org>
* fs: nfs: Fix possible null-pointer dereferences in encode_attrs()Jia-Ju Bai2019-10-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | [ Upstream commit e2751463eaa6f9fec8fea80abbdc62dbc487b3c5 ] In encode_attrs(), there is an if statement on line 1145 to check whether label is NULL: if (label && (attrmask[2] & FATTR4_WORD2_SECURITY_LABEL)) When label is NULL, it is used on lines 1178-1181: *p++ = cpu_to_be32(label->lfs); *p++ = cpu_to_be32(label->pi); *p++ = cpu_to_be32(label->len); p = xdr_encode_opaque_fixed(p, label->label, label->len); To fix these bugs, label is checked before being used. These bugs are found by a static analysis tool STCheck written by us. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* ima: always return negative code for errorSascha Hauer2019-10-111-1/+4
| | | | | | | | | | | | | | | | [ Upstream commit f5e1040196dbfe14c77ce3dfe3b7b08d2d961e88 ] integrity_kernel_read() returns the number of bytes read. If this is a short read then this positive value is returned from ima_calc_file_hash_atfm(). Currently this is only indirectly called from ima_calc_file_hash() and this function only tests for the return value being zero or nonzero and also doesn't forward the return value. Nevertheless there's no point in returning a positive value as an error, so translate a short read into -EINVAL. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* cfg80211: initialize on-stack chandefsJohannes Berg2019-10-113-3/+5
| | | | | | | | | | | | | | | | | | | | commit f43e5210c739fe76a4b0ed851559d6902f20ceb1 upstream. In a few places we don't properly initialize on-stack chandefs, resulting in EDMG data to be non-zero, which broke things. Additionally, in a few places we rely on the driver to init the data completely, but perhaps we shouldn't as non-EDMG drivers may not initialize the EDMG data, also initialize it there. Cc: stable@vger.kernel.org Fixes: 2a38075cd0be ("nl80211: Add support for EDMG channels") Reported-by: Dmitry Osipenko <digetx@gmail.com> Tested-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/1569239475-I2dcce394ecf873376c386a78f31c2ec8b538fa25@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ieee802154: atusb: fix use-after-free at disconnectJohan Hovold2019-10-111-1/+2
| | | | | | | | | | | | | | | | commit 7fd25e6fc035f4b04b75bca6d7e8daa069603a76 upstream. The disconnect callback was accessing the hardware-descriptor private data after having having freed it. Fixes: 7490b008d123 ("ieee802154: add support for atusb transceiver") Cc: stable <stable@vger.kernel.org> # 4.2 Cc: Alexander Aring <alex.aring@gmail.com> Reported-by: syzbot+f4509a9138a1472e7e80@syzkaller.appspotmail.com Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xen/xenbus: fix self-deadlock after killing user processJuergen Gross2019-10-111-2/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit a8fabb38525c51a094607768bac3ba46b3f4a9d5 upstream. In case a user process using xenbus has open transactions and is killed e.g. via ctrl-C the following cleanup of the allocated resources might result in a deadlock due to trying to end a transaction in the xenbus worker thread: [ 2551.474706] INFO: task xenbus:37 blocked for more than 120 seconds. [ 2551.492215] Tainted: P OE 5.0.0-29-generic #5 [ 2551.510263] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 2551.528585] xenbus D 0 37 2 0x80000080 [ 2551.528590] Call Trace: [ 2551.528603] __schedule+0x2c0/0x870 [ 2551.528606] ? _cond_resched+0x19/0x40 [ 2551.528632] schedule+0x2c/0x70 [ 2551.528637] xs_talkv+0x1ec/0x2b0 [ 2551.528642] ? wait_woken+0x80/0x80 [ 2551.528645] xs_single+0x53/0x80 [ 2551.528648] xenbus_transaction_end+0x3b/0x70 [ 2551.528651] xenbus_file_free+0x5a/0x160 [ 2551.528654] xenbus_dev_queue_reply+0xc4/0x220 [ 2551.528657] xenbus_thread+0x7de/0x880 [ 2551.528660] ? wait_woken+0x80/0x80 [ 2551.528665] kthread+0x121/0x140 [ 2551.528667] ? xb_read+0x1d0/0x1d0 [ 2551.528670] ? kthread_park+0x90/0x90 [ 2551.528673] ret_from_fork+0x35/0x40 Fix this by doing the cleanup via a workqueue instead. Reported-by: James Dingwall <james@dingwall.me.uk> Fixes: fd8aa9095a95c ("xen: optimize xenbus driver for multiple concurrent xenstore accesses") Cc: <stable@vger.kernel.org> # 4.11 Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Revert "locking/pvqspinlock: Don't wait if vCPU is preempted"Wanpeng Li2019-10-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 89340d0935c9296c7b8222b6eab30e67cb57ab82 upstream. This patch reverts commit 75437bb304b20 (locking/pvqspinlock: Don't wait if vCPU is preempted). A large performance regression was caused by this commit. on over-subscription scenarios. The test was run on a Xeon Skylake box, 2 sockets, 40 cores, 80 threads, with three VMs of 80 vCPUs each. The score of ebizzy -M is reduced from 13000-14000 records/s to 1700-1800 records/s: Host Guest score vanilla w/o kvm optimizations upstream 1700-1800 records/s vanilla w/o kvm optimizations revert 13000-14000 records/s vanilla w/ kvm optimizations upstream 4500-5000 records/s vanilla w/ kvm optimizations revert 14000-15500 records/s Exit from aggressive wait-early mechanism can result in premature yield and extra scheduling latency. Actually, only 6% of wait_early events are caused by vcpu_is_preempted() being true. However, when one vCPU voluntarily releases its vCPU, all the subsequently waiters in the queue will do the same and the cascading effect leads to bad performance. kvm optimizations: [1] commit d73eb57b80b (KVM: Boost vCPUs that are delivering interrupts) [2] commit 266e85a5ec9 (KVM: X86: Boost queue head vCPU to mitigate lock waiter preemption) Tested-by: loobinliu@tencent.com Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Waiman Long <longman@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: loobinliu@tencent.com Cc: stable@vger.kernel.org Fixes: 75437bb304b20 (locking/pvqspinlock: Don't wait if vCPU is preempted) Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mmc: sdhci-of-esdhc: set DMA snooping based on DMA coherenceRussell King2019-10-111-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 121bd08b029e03404c451bb237729cdff76eafed upstream. We must not unconditionally set the DMA snoop bit; if the DMA API is assuming that the device is not DMA coherent, and the device snoops the CPU caches, the device can see stale cache lines brought in by speculative prefetch. This leads to the device seeing stale data, potentially resulting in corrupted data transfers. Commonly, this results in a descriptor fetch error such as: mmc0: ADMA error mmc0: sdhci: ============ SDHCI REGISTER DUMP =========== mmc0: sdhci: Sys addr: 0x00000000 | Version: 0x00002202 mmc0: sdhci: Blk size: 0x00000008 | Blk cnt: 0x00000001 mmc0: sdhci: Argument: 0x00000000 | Trn mode: 0x00000013 mmc0: sdhci: Present: 0x01f50008 | Host ctl: 0x00000038 mmc0: sdhci: Power: 0x00000003 | Blk gap: 0x00000000 mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x000040d8 mmc0: sdhci: Timeout: 0x00000003 | Int stat: 0x00000001 mmc0: sdhci: Int enab: 0x037f108f | Sig enab: 0x037f108b mmc0: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00002202 mmc0: sdhci: Caps: 0x35fa0000 | Caps_1: 0x0000af00 mmc0: sdhci: Cmd: 0x0000333a | Max curr: 0x00000000 mmc0: sdhci: Resp[0]: 0x00000920 | Resp[1]: 0x001d8a33 mmc0: sdhci: Resp[2]: 0x325b5900 | Resp[3]: 0x3f400e00 mmc0: sdhci: Host ctl2: 0x00000000 mmc0: sdhci: ADMA Err: 0x00000009 | ADMA Ptr: 0x000000236d43820c mmc0: sdhci: ============================================ mmc0: error -5 whilst initialising SD card but can lead to other errors, and potentially direct the SDHCI controller to read/write data to other memory locations (e.g. if a valid descriptor is visible to the device in a stale cache line.) Fix this by ensuring that the DMA snoop bit corresponds with the behaviour of the DMA API. Since the driver currently only supports DT, use of_dma_is_coherent(). Note that device_get_dma_attr() can not be used as that risks re-introducing this bug if/when the driver is converted to ACPI. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mmc: sdhci: improve ADMA error reportingRussell King2019-10-111-5/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | commit d1c536e3177390da43d99f20143b810c35433d1f upstream. ADMA errors are potentially data corrupting events; although we print the register state, we do not usefully print the ADMA descriptors. Worse than that, we print them by referencing their virtual address which is meaningless when the register state gives us the DMA address of the failing descriptor. Print the ADMA descriptors giving their DMA addresses rather than their virtual addresses, and print them using SDHCI_DUMP() rather than DBG(). We also do not show the correct value of the interrupt status register; the register dump shows the current value, after we have cleared the pending interrupts we are going to service. What is more useful is to print the interrupts that _were_ pending at the time the ADMA error was encountered. Fix that too. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/omap: fix max fclk divider for omap36xxTomi Valkeinen2019-10-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | commit e2c4ed148cf3ec8669a1d90dc66966028e5fad70 upstream. The OMAP36xx and AM/DM37x TRMs say that the maximum divider for DSS fclk (in CM_CLKSEL_DSS) is 32. Experimentation shows that this is not correct, and using divider of 32 breaks DSS with a flood or underflows and sync losts. Dividers up to 31 seem to work fine. There is another patch to the DT files to limit the divider correctly, but as the DSS driver also needs to know the maximum divider to be able to iteratively find good rates, we also need to do the fix in the DSS driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Adam Ford <aford173@gmail.com> Cc: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20191002122542.8449-1-tomi.valkeinen@ti.com Tested-by: Adam Ford <aford173@gmail.com> Reviewed-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* watchdog: imx2_wdt: fix min() calculation in imx2_wdt_set_timeoutRasmus Villemoes2019-10-111-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | commit 144783a80cd2cbc45c6ce17db649140b65f203dd upstream. Converting from ms to s requires dividing by 1000, not multiplying. So this is currently taking the smaller of new_timeout and 1.28e8, i.e. effectively new_timeout. The driver knows what it set max_hw_heartbeat_ms to, so use that value instead of doing a division at run-time. FWIW, this can easily be tested by booting into a busybox shell and doing "watchdog -t 5 -T 130 /dev/watchdog" - without this patch, the watchdog fires after 130&127 == 2 seconds. Fixes: b07e228eee69 "watchdog: imx2_wdt: Fix set_timeout for big timeout values" Cc: stable@vger.kernel.org # 5.2 plus anything the above got backported to Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812131356.23039-1-linux@rasmusvillemoes.dk Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* timer: Read jiffies once when forwarding base clkLi RongQing2019-10-111-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit e430d802d6a3aaf61bd3ed03d9404888a29b9bf9 upstream. The timer delayed for more than 3 seconds warning was triggered during testing. Workqueue: events_unbound sched_tick_remote RIP: 0010:sched_tick_remote+0xee/0x100 ... Call Trace: process_one_work+0x18c/0x3a0 worker_thread+0x30/0x380 kthread+0x113/0x130 ret_from_fork+0x22/0x40 The reason is that the code in collect_expired_timers() uses jiffies unprotected: if (next_event > jiffies) base->clk = jiffies; As the compiler is allowed to reload the value base->clk can advance between the check and the store and in the worst case advance farther than next event. That causes the timer expiry to be delayed until the wheel pointer wraps around. Convert the code to use READ_ONCE() Fixes: 236968383cf5 ("timers: Optimize collect_expired_timers() for NOHZ") Signed-off-by: Li RongQing <lirongqing@baidu.com> Signed-off-by: Liang ZhiCheng <liangzhicheng@baidu.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/1568894687-14499-1-git-send-email-lirongqing@baidu.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usercopy: Avoid HIGHMEM pfn warningKees Cook2019-10-111-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 314eed30ede02fa925990f535652254b5bad6b65 upstream. When running on a system with >512MB RAM with a 32-bit kernel built with: CONFIG_DEBUG_VIRTUAL=y CONFIG_HIGHMEM=y CONFIG_HARDENED_USERCOPY=y all execve()s will fail due to argv copying into kmap()ed pages, and on usercopy checking the calls ultimately of virt_to_page() will be looking for "bad" kmap (highmem) pointers due to CONFIG_DEBUG_VIRTUAL=y: ------------[ cut here ]------------ kernel BUG at ../arch/x86/mm/physaddr.c:83! invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.3.0-rc8 #6 Hardware name: Dell Inc. Inspiron 1318/0C236D, BIOS A04 01/15/2009 EIP: __phys_addr+0xaf/0x100 ... Call Trace: __check_object_size+0xaf/0x3c0 ? __might_sleep+0x80/0xa0 copy_strings+0x1c2/0x370 copy_strings_kernel+0x2b/0x40 __do_execve_file+0x4ca/0x810 ? kmem_cache_alloc+0x1c7/0x370 do_execve+0x1b/0x20 ... The check is from arch/x86/mm/physaddr.c: VIRTUAL_BUG_ON((phys_addr >> PAGE_SHIFT) > max_low_pfn); Due to the kmap() in fs/exec.c: kaddr = kmap(kmapped_page); ... if (copy_from_user(kaddr+offset, str, bytes_to_copy)) ... Now we can fetch the correct page to avoid the pfn check. In both cases, hardened usercopy will need to walk the page-span checker (if enabled) to do sanity checking. Reported-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Fixes: f5509cc18daa ("mm: Hardened usercopy") Cc: Matthew Wilcox <willy@infradead.org> Cc: stable@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Link: https://lore.kernel.org/r/201909171056.7F2FFD17@keescook Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* crypto: caam - fix concurrency issue in givencrypt descriptorHoria Geantă2019-10-112-1/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 48f89d2a2920166c35b1c0b69917dbb0390ebec7 upstream. IV transfer from ofifo to class2 (set up at [29][30]) is not guaranteed to be scheduled before the data transfer from ofifo to external memory (set up at [38]: [29] 10FA0004 ld: ind-nfifo (len=4) imm [30] 81F00010 <nfifo_entry: ofifo->class2 type=msg len=16> [31] 14820004 ld: ccb2-datasz len=4 offs=0 imm [32] 00000010 data:0x00000010 [33] 8210010D operation: cls1-op aes cbc init-final enc [34] A8080B04 math: (seqin + math0)->vseqout len=4 [35] 28000010 seqfifold: skip len=16 [36] A8080A04 math: (seqin + math0)->vseqin len=4 [37] 2F1E0000 seqfifold: both msg1->2-last2-last1 len=vseqinsz [38] 69300000 seqfifostr: msg len=vseqoutsz [39] 5C20000C seqstr: ccb2 ctx len=12 offs=0 If ofifo -> external memory transfer happens first, DECO will hang (issuing a Watchdog Timeout error, if WDOG is enabled) waiting for data availability in ofifo for the ofifo -> c2 ififo transfer. Make sure IV transfer happens first by waiting for all CAAM internal transfers to end before starting payload transfer. New descriptor with jump command inserted at [37]: [..] [36] A8080A04 math: (seqin + math0)->vseqin len=4 [37] A1000401 jump: jsl1 all-match[!nfifopend] offset=[01] local->[38] [38] 2F1E0000 seqfifold: both msg1->2-last2-last1 len=vseqinsz [39] 69300000 seqfifostr: msg len=vseqoutsz [40] 5C20000C seqstr: ccb2 ctx len=12 offs=0 [Note: the issue is present in the descriptor from the very beginning (cf. Fixes tag). However I've marked it v4.19+ since it's the oldest maintained kernel that the patch applies clean against.] Cc: <stable@vger.kernel.org> # v4.19+ Fixes: 1acebad3d8db8 ("crypto: caam - faster aead implementation") Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* crypto: cavium/zip - Add missing single_release()Wei Yongjun2019-10-111-0/+3
| | | | | | | | | | | | | | commit c552ffb5c93d9d65aaf34f5f001c4e7e8484ced1 upstream. When using single_open() for opening, single_release() should be used instead of seq_release(), otherwise there is a memory leak. Fixes: 09ae5d37e093 ("crypto: zip - Add Compression/Decompression statistics") Cc: <stable@vger.kernel.org> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* crypto: skcipher - Unmap pages after an external errorHerbert Xu2019-10-111-19/+23
| | | | | | | | | | | | | | | | | | | | | | | | commit 0ba3c026e685573bd3534c17e27da7c505ac99c4 upstream. skcipher_walk_done may be called with an error by internal or external callers. For those internal callers we shouldn't unmap pages but for external callers we must unmap any pages that are in use. This patch distinguishes between the two cases by checking whether walk->nbytes is zero or not. For internal callers, we now set walk->nbytes to zero prior to the call. For external callers, walk->nbytes has always been non-zero (as zero is used to indicate the termination of a walk). Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Fixes: 5cde0af2a982 ("[CRYPTO] cipher: Added block cipher type") Cc: <stable@vger.kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* crypto: qat - Silence smp_processor_id() warningAlexander Sverdlin2019-10-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 1b82feb6c5e1996513d0fb0bbb475417088b4954 upstream. It seems that smp_processor_id() is only used for a best-effort load-balancing, refer to qat_crypto_get_instance_node(). It's not feasible to disable preemption for the duration of the crypto requests. Therefore, just silence the warning. This commit is similar to e7a9b05ca4 ("crypto: cavium - Fix smp_processor_id() warnings"). Silences the following splat: BUG: using smp_processor_id() in preemptible [00000000] code: cryptomgr_test/2904 caller is qat_alg_ablkcipher_setkey+0x300/0x4a0 [intel_qat] CPU: 1 PID: 2904 Comm: cryptomgr_test Tainted: P O 4.14.69 #1 ... Call Trace: dump_stack+0x5f/0x86 check_preemption_disabled+0xd3/0xe0 qat_alg_ablkcipher_setkey+0x300/0x4a0 [intel_qat] skcipher_setkey_ablkcipher+0x2b/0x40 __test_skcipher+0x1f3/0xb20 ? cpumask_next_and+0x26/0x40 ? find_busiest_group+0x10e/0x9d0 ? preempt_count_add+0x49/0xa0 ? try_module_get+0x61/0xf0 ? crypto_mod_get+0x15/0x30 ? __kmalloc+0x1df/0x1f0 ? __crypto_alloc_tfm+0x116/0x180 ? crypto_skcipher_init_tfm+0xa6/0x180 ? crypto_create_tfm+0x4b/0xf0 test_skcipher+0x21/0xa0 alg_test_skcipher+0x3f/0xa0 alg_test.part.6+0x126/0x2a0 ? finish_task_switch+0x21b/0x260 ? __schedule+0x1e9/0x800 ? __wake_up_common+0x8d/0x140 cryptomgr_test+0x40/0x50 kthread+0xff/0x130 ? cryptomgr_notify+0x540/0x540 ? kthread_create_on_node+0x70/0x70 ret_from_fork+0x24/0x50 Fixes: ed8ccaef52 ("crypto: qat - Add support for SRIOV") Cc: stable@vger.kernel.org Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tools lib traceevent: Fix "robust" test of do_generate_dynamic_list_fileSteven Rostedt (VMware)2019-10-111-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 82a2f88458d70704be843961e10b5cef9a6e95d3 upstream. The tools/lib/traceevent/Makefile had a test added to it to detect a failure of the "nm" when making the dynamic list file (whatever that is). The problem is that the test sorts the values "U W w" and some versions of sort will place "w" ahead of "W" (even though it has a higher ASCII value, and break the test. Add 'tr "w" "W"' to merge the two and not worry about the ordering. Reported-by: Tzvetomir Stoyanov <tstoyanov@vmware.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Carrillo-Cisneros <davidcc@google.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Michal rarek <mmarek@suse.com> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Wang Nan <wangnan0@huawei.com> Cc: stable@vger.kernel.org Fixes: 6467753d61399 ("tools lib traceevent: Robustify do_generate_dynamic_list_file") Link: http://lkml.kernel.org/r/20190805130150.25acfeb1@gandalf.local.home Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* can: mcp251x: mcp251x_hw_reset(): allow more time after a resetMarc Kleine-Budde2019-10-111-5/+14
| | | | | | | | | | | | | | commit d84ea2123f8d27144e3f4d58cd88c9c6ddc799de upstream. Some boards take longer than 5ms to power up after a reset, so allow some retries attempts before giving up. Fixes: ff06d611a31c ("can: mcp251x: Improve mcp251x_hw_reset()") Cc: linux-stable <stable@vger.kernel.org> Tested-by: Sean Nyekjaer <sean@geanix.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-17 21:45:12 +0000